Get Help


Guides The right place to share guides and tutorials with the community. Slicers Slicer troubles? Post here. Make sure to include all relevant information such as used slicer & version and also provide some sample GCODE files. Electronics Need assistance getting some kind of electronics to run, like specific addon hardware such as displays, or just GPIO pins? Post here. Include all available information about what you are trying to run how and what specifically doesn't work. FAQ Curated list of Frequently Asked Questions Networking Trouble getting OctoPi to connect to your network, or connecting to it from your clients? Post here. Make sure to include all available information about your network layout and hardware. Webcams Got an issue getting a webcam to work with OctoPi, or some timelapse related issues? This is the right place. Make sure to include all available information on the type of webcam you are struggling to get to work, and also include /var/log/webcamd.log from the log files.
Topic Replies Activity
PSA: Please mark the solutions to your topics as such

All topics you create in this category can be marked as "Solved" by clicking the little :marksolved: icon under the post that contains the solution: [image] Please make heavy use of it. Marking a topic as solved allows…

3 April 11, 2018
Need help? READ THIS FIRST! 2 March 8, 2018
My Print just do the commands in start GCODE and stop 20 December 13, 2019
Ender 3 pro bed keeps moving out of the frame 11 December 12, 2019
Trouble connectiing to Octoprint 4 December 12, 2019
No WIFI or ethernet 3b/3b+ after powering on printer 8 December 12, 2019
M150 Command not executing 8 December 12, 2019
Octoprint and local screen 3 December 12, 2019
Webcam stream loading - All other outputs suggests Camera is working 1 December 11, 2019
Offline (Error: SerialException: 'device reports readiness to read but returned no data (device disconnected or multiple access on port?)' @ comm.py:_readline:2793) 17 December 12, 2019
Wie kann ich zwei Webcams an einem OctoPi zum laufen bekommen? 5 December 11, 2019
Octoprint failed on another print, log attached 3 December 11, 2019
GCODE Analysis rarely includes the "printingArea" dict 6 December 11, 2019
OctoPi not reading SD card or print progress from Ender 3 (SOLVED) 55 December 11, 2019
Resolution Logitech c 270 2 December 11, 2019
How to change Section/Plugins order 4 December 11, 2019
Printer freezes mid print. Losing connection between printer and RPI 4 December 10, 2019
Usb webcam randomly connects and not connect on startup to octopi 9 December 10, 2019
Tronxy X5S won't connect after update 17 December 10, 2019
Network Question 26 December 10, 2019
OctoPrint Update 14.0 1.4.0rc1 502 Bad Gateway 7 December 10, 2019
OctoLapse resolution with webcam 6 December 10, 2019
Camera Test Failed 3 December 10, 2019
Octoprint dose not starting Prints correctly and dose not read SD card 1 December 10, 2019
Layer shifting only when using OctoPrint 17 December 10, 2019
Error in Octoprint Log - Invalid Checksum on Ender 24 December 10, 2019
Tevo nereus octoprint how to? 2 December 10, 2019
Octoprint in Docker Webcam Setup PS3 eye USB camera 13 December 10, 2019
Plugin settings not being created / saved 3 December 9, 2019
File display not showing contents 10 December 9, 2019