Setup: Open both the webcam stream and a stopwatch on my computer. Point the streaming camera at my computer screen. Take a picture or screenshot of the computer. The difference in timestamps between the stopwatch on the screen and what's shown in the stream is the end-to-end latency.
I hooked everything up to ethernet so I wasn't also measuring my wifi performance 
We've opened a specific channel #dev-octopi in the Discord server at the request of @Quinninator to allow better real-time collaboration on your struggles with prepping the octopi side changes.
Got everything running through Janus and accessible via direct ip access in a web browser but when I try to point Octoprint webcam stream url to it I get "Bad status line 'Invalid method encountered". Any ideas on whats going on here? Set up is Pi 3B running 0.18.1 - 1.7.2 with PiCam H264 transcoded
ERROR:aiohttp.server:Error handling request
Traceback (most recent call last):
File "/home/pi/aiortc/venv/lib/python3.7/site-packages/aiohttp/web_protocol.py", line 334, in data_received
messages, upgraded, tail = self._request_parser.feed_data(data)
File "aiohttp/_http_parser.pyx", line 551, in aiohttp._http_parser.HttpParser.feed_data
aiohttp.http_exceptions.BadStatusLine: 400, message="Bad status line 'Invalid method encountered'"
INFO:aiohttp.access:192.168.1.63 [27/Nov/2021:14:54:20 +0000] "UNKNOWN / HTTP/1.0" 400 204 "-" "-"
Hello, i have c920 webcam, i'd like to use h.264
i use octopi with raspberry pi 3b
i have octoprint 1.7.2, does it support WebRTC ?
If i select maintenance RC branch, there is no upper version proposed. Are maintenance and maintenance RC the same ?
Thanks
There's currently no maintenance release candidate available newer than 1.7.2, only manually installing from GitHub on the maintenance branch has support for webRTC.
Thanks, i added it manually
I have performed those steps :
- To update to a version of OctoPrint with WebRTC support, checkout the
maintenancebranch (PR4225 has been merged intomaintenanceand will be released with 1.8.0).
- To set up a WebRTC server on your Pi, see this post (see also this post if you have a Pi camera)
i can see my camera image but image is strange :
In addition, can someone detail the procedure to make the server start automatically please ?
Thanks
@johnboiles I was wondering will this new approach work for the new Logitech C920 cameras that no longer have the hardware h.264 built in?
I have multiple cameras and it seems its only able to open /dev/video0
Is there any way to change it?
Hi john, Novice user here,
Following along with you line for line,
when i hit
"Use STUN server"
then followed by
START i get a error,
"
======== Running on http://0.0.0.0:8080 ========
(Press CTRL+C to quit)
INFO:aiohttp.access:192.168.1.157 [01/Dec/2022:05:23:36 +0000] "GET / HTTP/1.1" 200 979 "-" "Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/107.0.0.0 Safari/537.36"
INFO:aiohttp.access:192.168.1.157 [01/Dec/2022:05:23:36 +0000] "GET /client.js HTTP/1.1" 200 2426 "http://octopi.local:8080/" "Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/107.0.0.0 Safari/537.36"
[video4linux2,v4l2 @ 0x2494030] ioctl(VIDIOC_STREAMON): Invalid argument
ERROR:aiohttp.server:Error handling request
Traceback (most recent call last):
File "/home/pi/aiortc/venv/lib/python3.7/site-packages/aiohttp/web_protocol.py", line 433, in _handle_request
resp = await request_handler(request)
File "/home/pi/aiortc/venv/lib/python3.7/site-packages/aiohttp/web_app.py", line 504, in _handle
resp = await handler(request)
File "/home/pi/aiortc/examples/webcam/webcam.py", line 93, in offer
audio, video = create_local_tracks(args.play_from, transcode=args.transcode, options=args.video_options)
File "/home/pi/aiortc/examples/webcam/webcam.py", line 46, in create_local_tracks
webcam = MediaPlayer("/dev/video0", format="v4l2", transcode=transcode, options=options)
File "/home/pi/aiortc/venv/lib/python3.7/site-packages/aiortc/contrib/media.py", line 309, in init
self.__container = av.open(file=file, format=format, mode="r", options=options)
File "av/container/core.pyx", line 354, in av.container.core.open
File "av/container/core.pyx", line 225, in av.container.core.Container.cinit
File "av/container/core.pyx", line 257, in av.container.core.Container.err_check
File "av/error.pyx", line 336, in av.error.err_check
av.error.ValueError: [Errno 22] Invalid argument: '/dev/video0'
INFO:aiohttp.access:192.168.1.157 [01/Dec/2022:05:23:37 +0000] "POST /offer HTTP/1.1" 500 244 "http://octopi.local:8080/" "Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/107.0.0.0 Safari/537.36"
INFO:aiohttp.access:127.0.0.1 [01/Dec/2022:05:23:41 +0000] "GET /?action=stream HTTP/1.1" 200 998 "-" "Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/107.0.0.0 Safari/537.36"
"
Any ideas? cheers!
If you are using a pi camera, you could try setting it to legacy mode:
sudo raspi-config > 3 Interface Options > I1 Legacy Camera
I also get an error once I click "Start"
The web page (in Firefox) shows:
SyntaxError: JSON.parse: unexpected non-whitespace character after JSON data at line 1 column 5 of the JSON data
Also, I get errors in the terminal on my Pi:
$ sudo systemctl stop webcamd
$ ./venv/bin/python examples/webcam/webcam.py --no-transcode --preferred-codec=video/H264 --video-options='{"video_size": "1920x1080", "framerate": "30", "input_format": "h264"}'
======== Running on http://0.0.0.0:8080 ========
(Press CTRL+C to quit)
Once I connect to the webpage at 192.168.1.6:8080,
INFO:aiohttp.access:192.168.1.130 [13/Feb/2023:15:40:41 +0000] "GET / HTTP/1.1" 200 979 "-" "Mozilla/5.0 (X11; Ubuntu; Linux x86_64; rv:109.0) Gecko/20100101 Firefox/109.0"
INFO:aiohttp.access:192.168.1.130 [13/Feb/2023:15:40:41 +0000] "GET /client.js HTTP/1.1" 200 2426 "http://192.168.1.6:8080/" "Mozilla/5.0 (X11; Ubuntu; Linux x86_64; rv:109.0) Gecko/20100101 Firefox/109.0"
INFO:aiohttp.access:192.168.1.130 [13/Feb/2023:15:40:41 +0000] "GET /favicon.ico HTTP/1.1" 404 172 "http://192.168.1.6:8080/" "Mozilla/5.0 (X11; Ubuntu; Linux x86_64; rv:109.0) Gecko/20100101 Firefox/109.0"
After I check "Use STUN Server" and click "Start" I get the SyntaxError: JSON.parse: unexpected non-whitespace character after JSON data at line 1 column 5 of the JSON data and the following in the terminal on my Pi:
ERROR:aiohttp.server:Error handling request
Traceback (most recent call last):
File "/home/bpeyser/aiortc/venv/lib/python3.9/site-packages/aiohttp/web_protocol.py", line 433, in _handle_request
resp = await request_handler(request)
File "/home/bpeyser/aiortc/venv/lib/python3.9/site-packages/aiohttp/web_app.py", line 504, in _handle
resp = await handler(request)
File "/home/bpeyser/aiortc/examples/webcam/webcam.py", line 96, in offer
pc.addTrack(video)
File "/home/bpeyser/aiortc/src/aiortc/rtcpeerconnection.py", line 428, in addTrack
transceiver = self.__createTransceiver(
File "/home/bpeyser/aiortc/src/aiortc/rtcpeerconnection.py", line 1055, in __createTransceiver
dtlsTransport = self.__createDtlsTransport()
File "/home/bpeyser/aiortc/src/aiortc/rtcpeerconnection.py", line 1032, in __createDtlsTransport
dtlsTransport = RTCDtlsTransport(iceTransport, self.__certificates)
File "/home/bpeyser/aiortc/src/aiortc/rtcdtlstransport.py", line 375, in __init__
self.__ctx = certificate._create_ssl_context()
File "/home/bpeyser/aiortc/src/aiortc/rtcdtlstransport.py", line 211, in _create_ssl_context
_openssl_assert(lib.SSL_CTX_use_certificate(ctx, self._cert._x509) == 1) # type: ignore
AttributeError: 'builtins.Certificate' object has no attribute '_x509'
It looks like an error with SSL, but I'm not sure why it's trying to use a certificate for SSL. I thought that would be skipped. I looked briefly at the aiortc source, but I just don't know enough about it to figure out how to ensure it doesn't try SSL. Maybe I can give is a self-signed certificate?
I run this on a Pi 4B/2GB running PiOS and OctoPrint, not OctoPi. Also, you'll see this runs python3.9 instead of python3.7. Otherwise, I'm using the instructions provided in Low-Latency H264 Streaming Support w/ WebRTC - #8 by johnboiles.
Any suggestions?
Also, FYI webcam info:
$ v4l2-ctl --list-formats
ioctl: VIDIOC_ENUM_FMT
Type: Video Capture
[0]: 'MJPG' (Motion-JPEG, compressed)
[1]: 'H264' (H.264, compressed)
[2]: 'YUYV' (YUYV 4:2:2)
$ v4l2-ctl --all
Driver Info:
Driver name : uvcvideo
Card type : T6 Webcam
Bus info : usb-0000:01:00.0-1.3
Driver version : 5.15.84
Capabilities : 0x84a00001
Video Capture
Metadata Capture
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x04200001
Video Capture
Streaming
Extended Pix Format
Media Driver Info:
Driver name : uvcvideo
Model : T6 Webcam
Serial : 985100000000100
Bus info : usb-0000:01:00.0-1.3
Media version : 5.15.84
Hardware revision: 0x00000010 (16)
Driver version : 5.15.84
Interface Info:
ID : 0x03000002
Type : V4L Video
Entity Info:
ID : 0x00000001 (1)
Name : T6 Webcam
Function : V4L2 I/O
Flags : default
Pad 0x01000007 : 0: Sink
Link 0x02000013: from remote pad 0x100000a of entity 'Processing 4': Data, Enabled, Immutable
Priority: 2
Video input : 0 (Camera 1: ok)
Format Video Capture:
Width/Height : 1920/1080
Pixel Format : 'MJPG' (Motion-JPEG)
Field : None
Bytes per Line : 0
Size Image : 3617600
Colorspace : Default
Transfer Function : Default (maps to Rec. 709)
YCbCr/HSV Encoding: Default (maps to ITU-R 601)
Quantization : Default (maps to Full Range)
Flags :
Crop Capability Video Capture:
Bounds : Left 0, Top 0, Width 1920, Height 1080
Default : Left 0, Top 0, Width 1920, Height 1080
Pixel Aspect: 1/1
Selection Video Capture: crop_default, Left 0, Top 0, Width 1920, Height 1080, Flags:
Selection Video Capture: crop_bounds, Left 0, Top 0, Width 1920, Height 1080, Flags:
Streaming Parameters Video Capture:
Capabilities : timeperframe
Frames per second: 30.000 (30/1)
Read buffers : 0
brightness 0x00980900 (int) : min=0 max=200 step=1 default=100 value=140
contrast 0x00980901 (int) : min=0 max=200 step=1 default=100 value=150
saturation 0x00980902 (int) : min=0 max=200 step=1 default=100 value=150
hue 0x00980903 (int) : min=0 max=360 step=1 default=0 value=0
you might want to check out using go2rtc instead of the webrtc server implementation described here.
I finally got go2rtc to work in my browser, using the following streams setting in go2rtc.yaml:
streams:
stream1: exec:ffmpeg -f v4l2 -input_format h264 -video_size 1920x1080 -framerate 30 -i /dev/video0 -c:v copy -an -rtsp_transport tcp -f rtsp {output}
I can open http://192.168.1.6:1984/stream.html?src=stream1 and see the webcam in Firefox. I think it is using h264 encoding directly from my webcam, without re-encoding (-c:v copy). Some other links shown in http://192.168.1.6:1984/links.html?src=stream1 also work. However, I can't open that in VLC, only in Firefox (or Chrome). I can open the RTSP link in VLC, and it is using h264, 30fps, probably directly from the webcam.
However, when I put http://192.168.1.6:1984/stream.html?src=stream1 in the Octoprint webcam stream URL setting, I don't see anything in the Stream test. I also tried http://192.168.1.6:8555, which is the WebRTC listen port, as well as the other ports. Not that I thought those would work. None of the other links that are OK in my browser work, either, such as http://192.168.1.6:1984/webrtc.html?src=stream1.
I also tried using webrtc://192.168.1.6:8555 and webrtc://192.168.1.6:8555/stream1 in Octoprint, and those didn't work, either. I feel like I'm really close to this, but I'm missing something.
Maybe one more hint?
Thanks!
@kantlivelong mentioned the other day he's using my webcam iframe plugin to work with go2rtc's intelligent delivery mechanism.
That did work!
I set the webcam stream to http://192.168.1.6:1984/stream.html?src=stream1 and it worked fine in the iframe.
Thanks for the suggestion.
Unfortunately, I couldn't figure out how to get a snapshot URL for timelapse.
go2rtc does offer a snapshot feature but it's not in jpeg format and instead a single frame mp4. I don't think there's any way in OP to handle this right now but you could make a small service to convert it and provide a consumable URL.
/api/frame.jpeg?src=${src} doesn't work? taken from here: go2rtc/links.html at 38ea8b56b85f74c5fef841b08c5be0ad5a007a10 · AlexxIT/go2rtc · GitHub
ah, looks like for that to function you have to have the MJPG module active too.
Right. On a positive note from what I remember OP generates a tinelapse in mp4. Since the snapshot should be h264 all ffmpeg will have to do is stich the snapshots together as is.
Trying to achieve just that right now, however, there are a couple of issues.
Firstly, the mp4 stills have a frame rate of 90000 fps and I have not been able to get any of the ways to set the frame rate to play nicely with concatenating the individual files.
Secondly, I am unsure how to concatenate the individual files, since the ffmpeg concat demuxer needs an input script, so would be harder to implement in octoprint.
Maybe it would be easiest to convert the frames to jpg first and then just run the regular ffmpeg command?
Hello all, I know this is an old post but I just tried to run the instructions in the OP and during the "pip install ." command I get "Getting requirements to build wheel did not run successfully."
I tried installing rust but that did not help. Any suggestions?
Thank you!