2018-11-03 16:41:06,120 Print Start Detected.  Command: M110 N0, Tags:set(['trigger:comm.start_print', 'source:job', 'trigger:comm.reset_line_numbers'])
2018-11-03 16:41:06,125 Print start detected, attempting to start timelapse.
2018-11-03 16:41:06,126 Printer event received:PrinterStateChanged.
2018-11-03 16:41:06,139 Printer event received:PrintStarted.
2018-11-03 16:41:06,193 Creating Layer Trigger - TriggerHeight:0.0 (none = layer change), RequiresZHop:False
2018-11-03 16:41:06,196 Extruder Triggers - OnExtrudingStart:True, OnExtruding:None, OnPrimed:True, OnRetractingStart:False OnRetracting:False, OnPartiallyRetracted:False, OnRetracted:True, ONDetractingStart:True, OnDetracting:False, OnDetracted:False
2018-11-03 16:41:06,198 Print Started - Timelapse Started.
2018-11-03 16:41:06,203 Queuing Command: Command Type:None, gcode:G28, cmd: G28 X0 Y0, tags: set(['fileline:1', 'source:file', 'filepos:44'])
2018-11-03 16:41:06,204 Received G28 - 
2018-11-03 16:41:06,210 Queuing Command: Command Type:None, gcode:M110, cmd: M110 N0, tags: set(['trigger:comm.start_print', 'source:job', 'trigger:comm.reset_line_numbers'])
2018-11-03 16:41:06,211 Extruder Changed: E:0.0, Retraction:0 IsExtruding:False-False, IsExtrudingStart:False-False, IsPrimed:False-True, IsRetractingStart:False-False, IsRetracting:False-False, IsPartiallyRetracted:False-False, IsRetracted:False-False, IsDetractingStart:False-False, IsDetracting:False-False, IsDetracted:False-False
2018-11-03 16:41:06,213 Printer event received:Home.
2018-11-03 16:41:06,218 homing to payload:None.
2018-11-03 16:41:06,223 A position altering command has been detected.  Fetching and updating position.  Position Command: M110
2018-11-03 16:41:06,235 Octolapse is requesting a position.
2018-11-03 16:41:06,235 Sent to printer: Command Type:None, gcode:G28, cmd: G28 X0 Y0, tags: set(['fileline:1', 'source:file', 'filepos:44'])
2018-11-03 16:41:06,238 Queuing Command: Command Type:None, gcode:M400, cmd: M400, tags: set(['trigger:printer.commands', 'plugin:octolapse', 'source:plugin', 'snapshot_gcode'])
2018-11-03 16:41:06,246 Extruder Changed: E:0.0, Retraction:0 IsExtruding:False-False, IsExtrudingStart:False-False, IsPrimed:False-True, IsRetractingStart:False-False, IsRetracting:False-False, IsPartiallyRetracted:False-False, IsRetracted:False-False, IsDetractingStart:False-False, IsDetracting:False-False, IsDetracted:False-False
2018-11-03 16:41:06,249 Queuing Command: Command Type:None, gcode:M114, cmd: M114, tags: set(['trigger:printer.commands', 'plugin:octolapse', 'source:plugin', 'snapshot_gcode'])
2018-11-03 16:41:06,250 Sent to printer: Command Type:None, gcode:M400, cmd: M400, tags: set(['trigger:printer.commands', 'plugin:octolapse', 'source:plugin', 'snapshot_gcode'])
2018-11-03 16:41:06,251 Received from printer: line:ok ?: Unsupported command: M400 

2018-11-03 16:41:06,252 Received from printer: line:ok ?:Line: 5743/12 Syntax error, char: '2' (0x32) : 

2018-11-03 16:41:06,253 Sent to printer: Command Type:None, gcode:M114, cmd: M114, tags: set(['trigger:printer.commands', 'plugin:octolapse', 'source:plugin', 'snapshot_gcode'])
2018-11-03 16:41:06,254 Received from printer: line:ok ?:Line: 5743/13 Syntax error, char: '1' (0x31) : 

2018-11-03 16:41:06,254 Received from printer: line:ok X:67.87 Y:49.65 Z:0.40 E:0.00 

2018-11-03 16:41:06,255 Printer event received:PositionUpdate.
2018-11-03 16:41:06,265 Sending triggering command for position acquisition - M110 N0.
2018-11-03 16:41:06,265 Queuing Command: Command Type:None, gcode:M110, cmd: M110 N0, tags: set(['trigger:printer.commands', 'plugin:octolapse', 'source:plugin', 'snapshot_gcode'])
2018-11-03 16:41:06,266 Position Acquired
2018-11-03 16:41:06,270 Sent to printer: Command Type:None, gcode:M110, cmd: M110 N0, tags: set(['trigger:printer.commands', 'plugin:octolapse', 'source:plugin', 'snapshot_gcode'])
2018-11-03 16:41:06,271 Queuing Command: Command Type:None, gcode:G28, cmd: G28 Z0, tags: set(['source:file', 'filepos:52', 'fileline:2'])
2018-11-03 16:41:06,272 Received G28 - 
2018-11-03 16:41:06,274 Printer event received:Home.
2018-11-03 16:41:06,277 homing to payload:None.
2018-11-03 16:41:06,278 Sent to printer: Command Type:None, gcode:G28, cmd: G28 Z0, tags: set(['source:file', 'filepos:52', 'fileline:2'])
2018-11-03 16:41:10,643 Received from printer: line:ok Q:256

2018-11-03 16:41:10,655 Queuing Command: Command Type:None, gcode:M104, cmd: M104 S215, tags: set(['source:file', 'filepos:90', 'fileline:3'])
2018-11-03 16:41:10,658 A position altering command has been detected.  Fetching and updating position.  Position Command: M104
2018-11-03 16:41:10,660 Octolapse is requesting a position.
2018-11-03 16:41:10,664 Queuing Command: Command Type:None, gcode:M400, cmd: M400, tags: set(['trigger:printer.commands', 'plugin:octolapse', 'source:plugin', 'snapshot_gcode'])
2018-11-03 16:41:10,671 Sent to printer: Command Type:None, gcode:M400, cmd: M400, tags: set(['trigger:printer.commands', 'plugin:octolapse', 'source:plugin', 'snapshot_gcode'])
2018-11-03 16:41:10,678 Queuing Command: Command Type:None, gcode:M114, cmd: M114, tags: set(['trigger:printer.commands', 'plugin:octolapse', 'source:plugin', 'snapshot_gcode'])
2018-11-03 16:41:10,687 Received from printer: line:ok ?: Unsupported command: M400 

2018-11-03 16:41:10,689 Received from printer: line:ok ?:Line: 5747/9 Syntax error, char: '3' (0x33) : 

2018-11-03 16:41:10,700 Received from printer: line:ok ?:Line: 5747/10 Syntax error, char: '7' (0x37) : 

2018-11-03 16:41:10,701 Received from printer: line:ok X:0.00 Y:0.00 Z:0.00 E:0.00 

2018-11-03 16:41:10,704 Sent to printer: Command Type:None, gcode:M114, cmd: M114, tags: set(['trigger:printer.commands', 'plugin:octolapse', 'source:plugin', 'snapshot_gcode'])
2018-11-03 16:41:10,705 Printer event received:PositionUpdate.
2018-11-03 16:41:10,727 Position Acquired
2018-11-03 16:41:10,728 Queuing Command: Command Type:None, gcode:M190, cmd: M190 S60, tags: set(['source:file', 'filepos:121', 'fileline:4'])
2018-11-03 16:41:10,733 Queuing Command: Command Type:None, gcode:M109, cmd: M109 S215, tags: set(['source:file', 'filepos:154', 'fileline:5'])
2018-11-03 16:41:10,745 Queuing Command: Command Type:None, gcode:M106, cmd: M106 S0, tags: set(['filepos:269', 'source:file', 'fileline:6'])
2018-11-03 16:41:10,756 Queuing Command: Command Type:None, gcode:G21, cmd: G21, tags: set(['source:file', 'fileline:7', 'filepos:279'])
2018-11-03 16:41:10,757 Received G21 - Already in millimeters.
2018-11-03 16:41:10,767 Sent to printer: Command Type:None, gcode:G21, cmd: G21, tags: set(['source:file', 'fileline:7', 'filepos:279'])
2018-11-03 16:41:10,777 Received from printer: line:ok Q:256

2018-11-03 16:41:10,789 Queuing Command: Command Type:None, gcode:G90, cmd: G90, tags: set(['filepos:290', 'fileline:8', 'source:file'])
2018-11-03 16:41:10,792 Received G90 - Switching to absolute x,y,z coordinates.
2018-11-03 16:41:10,797 Sent to printer: Command Type:None, gcode:G90, cmd: G90, tags: set(['filepos:290', 'fileline:8', 'source:file'])
2018-11-03 16:41:10,807 Received from printer: line:ok Q:256

2018-11-03 16:41:10,809 Queuing Command: Command Type:None, gcode:G92, cmd: G92 E0, tags: set(['fileline:9', 'source:file', 'filepos:310'])
2018-11-03 16:41:10,812 Received G92 - Set Position.  Command:{0}, XOffset:{1}, YOffset:0, ZOffset:0, EOffset:0.0
2018-11-03 16:41:10,820 Sent to printer: Command Type:None, gcode:G92, cmd: G92 E0, tags: set(['fileline:9', 'source:file', 'filepos:310'])
2018-11-03 16:41:10,822 Received from printer: line:ok Q:255

2018-11-03 16:41:10,827 Queuing Command: Command Type:None, gcode:G0, cmd: G0 F1200 Z0.200, tags: set(['source:file', 'fileline:10', 'filepos:327'])
2018-11-03 16:41:10,831 Received G0
2018-11-03 16:41:10,832 Position Change - G0 F1200 Z0.200 - Absolute Move From(X:0.0,Y:0.0,Z:0.0,E:0.0) - To(X:0.0,Y:0.0,Z:0.2,E:0.0) 
2018-11-03 16:41:10,842 Sent to printer: Command Type:None, gcode:G0, cmd: G0 F1200 Z0.200, tags: set(['source:file', 'fileline:10', 'filepos:327'])
2018-11-03 16:41:10,854 Received from printer: line:ok Q:255

2018-11-03 16:41:10,855 Queuing Command: Command Type:None, gcode:G0, cmd: G0 F4800 E-1.0000, tags: set(['source:file', 'fileline:11', 'filepos:362'])
2018-11-03 16:41:10,858 Received G0
2018-11-03 16:41:10,861 Position - Unable to update the extruder position, the extruder mode (relative/absolute) has been selected (absolute/relative). 
2018-11-03 16:41:10,863 Position Change - G0 F4800 E-1.0000 - Absolute Move From(X:0.0,Y:0.0,Z:0.2,E:0.0) - To(X:0.0,Y:0.0,Z:0.2,E:0.0) 
2018-11-03 16:41:10,868 Printer event received:ZChange.
2018-11-03 16:41:10,872 Sent to printer: Command Type:None, gcode:G0, cmd: G0 F4800.0, tags: set(['source:file', 'fileline:11', 'filepos:362', 'source:rewrite', 'plugin:octolapse', 'phase:queuing'])
2018-11-03 16:41:10,881 Received from printer: line:ok Q:256

2018-11-03 16:41:10,887 Queuing Command: Command Type:None, gcode:G0, cmd: G0 X76.773 Y122.427 F5400, tags: set(['fileline:12', 'source:file', 'filepos:389'])
2018-11-03 16:41:10,892 Received G0
2018-11-03 16:41:10,894 Position Change - G0 X76.773 Y122.427 F5400 - Absolute Move From(X:0.0,Y:0.0,Z:0.2,E:0.0) - To(X:76.773,Y:122.427,Z:0.2,E:0.0) 
2018-11-03 16:41:10,905 Sent to printer: Command Type:None, gcode:G0, cmd: G0 X76.773 Y122.427 F5400, tags: set(['fileline:12', 'source:file', 'filepos:389'])
2018-11-03 16:41:10,914 Received from printer: line:ok Q:255

2018-11-03 16:41:10,917 Queuing Command: Command Type:None, gcode:G0, cmd: G0 F4800 E0.0000, tags: set(['fileline:13', 'source:file', 'filepos:407'])
2018-11-03 16:41:10,918 Received G0
2018-11-03 16:41:10,921 Position - Unable to update the extruder position, the extruder mode (relative/absolute) has been selected (absolute/relative). 
2018-11-03 16:41:10,921 Position Change - G0 F4800 E0.0000 - Absolute Move From(X:76.773,Y:122.427,Z:0.2,E:0.0) - To(X:76.773,Y:122.427,Z:0.2,E:0.0) 
2018-11-03 16:41:10,925 Sent to printer: Command Type:None, gcode:G0, cmd: G0 F4800.0, tags: set(['fileline:13', 'source:file', 'source:rewrite', 'filepos:407', 'plugin:octolapse', 'phase:queuing'])
2018-11-03 16:41:10,934 Received from printer: line:ok Q:256

2018-11-03 16:41:10,935 Queuing Command: Command Type:None, gcode:G1, cmd: G1 X78.106 Y123.227 E0.0543 F2400, tags: set(['source:file', 'filepos:442', 'fileline:14'])
2018-11-03 16:41:10,936 Received G1
2018-11-03 16:41:10,937 Position - Unable to update the extruder position, the extruder mode (relative/absolute) has been selected (absolute/relative). 
2018-11-03 16:41:10,938 Position Change - G1 X78.106 Y123.227 E0.0543 F2400 - Absolute Move From(X:76.773,Y:122.427,Z:0.2,E:0.0) - To(X:78.106,Y:123.227,Z:0.2,E:0.0) 
2018-11-03 16:41:10,940 Sent to printer: Command Type:None, gcode:G1, cmd: G1 Y123.227 X78.106 F2400.0, tags: set(['source:file', 'plugin:octolapse', 'fileline:14', 'source:rewrite', 'filepos:442', 'phase:queuing'])
2018-11-03 16:41:10,943 Received from printer: line:ok Q:255

2018-11-03 16:41:10,945 Queuing Command: Command Type:None, gcode:G1, cmd: G1 X78.506 Y123.360 E0.0690, tags: set(['source:file', 'filepos:471', 'fileline:15'])
2018-11-03 16:41:10,946 Received G1
2018-11-03 16:41:10,948 Position - Unable to update the extruder position, the extruder mode (relative/absolute) has been selected (absolute/relative). 
2018-11-03 16:41:10,950 Position Change - G1 X78.506 Y123.360 E0.0690 - Absolute Move From(X:78.106,Y:123.227,Z:0.2,E:0.0) - To(X:78.506,Y:123.36,Z:0.2,E:0.0) 
2018-11-03 16:41:10,953 Sent to printer: Command Type:None, gcode:G1, cmd: G1 Y123.36 X78.506, tags: set(['source:file', 'source:rewrite', 'filepos:471', 'fileline:15', 'plugin:octolapse', 'phase:queuing'])
2018-11-03 16:41:10,956 Received from printer: line:ok Q:254

2018-11-03 16:41:10,958 Queuing Command: Command Type:None, gcode:G1, cmd: G1 X78.772 Y123.626 E0.0822, tags: set(['fileline:16', 'source:file', 'filepos:500'])
2018-11-03 16:41:10,961 Received G1
2018-11-03 16:41:10,963 Position - Unable to update the extruder position, the extruder mode (relative/absolute) has been selected (absolute/relative). 
2018-11-03 16:41:10,969 Position Change - G1 X78.772 Y123.626 E0.0822 - Absolute Move From(X:78.506,Y:123.36,Z:0.2,E:0.0) - To(X:78.772,Y:123.626,Z:0.2,E:0.0) 
2018-11-03 16:41:10,973 Sent to printer: Command Type:None, gcode:G1, cmd: G1 Y123.626 X78.772, tags: set(['source:file', 'source:rewrite', 'filepos:500', 'fileline:16', 'plugin:octolapse', 'phase:queuing'])
2018-11-03 16:41:10,974 Received from printer: line:ok Q:253

2018-11-03 16:41:10,975 Queuing Command: Command Type:None, gcode:G1, cmd: G1 X79.172 Y123.760 E0.0969, tags: set(['source:file', 'fileline:17', 'filepos:529'])
2018-11-03 16:41:10,976 Received G1
2018-11-03 16:41:10,976 Position - Unable to update the extruder position, the extruder mode (relative/absolute) has been selected (absolute/relative). 
2018-11-03 16:41:10,978 Position Change - G1 X79.172 Y123.760 E0.0969 - Absolute Move From(X:78.772,Y:123.626,Z:0.2,E:0.0) - To(X:79.172,Y:123.76,Z:0.2,E:0.0) 
2018-11-03 16:41:10,979 Sent to printer: Command Type:None, gcode:G1, cmd: G1 Y123.76 X79.172, tags: set(['source:file', 'source:rewrite', 'fileline:17', 'filepos:529', 'plugin:octolapse', 'phase:queuing'])
2018-11-03 16:41:10,984 Received from printer: line:ok Q:252

2018-11-03 16:41:10,989 Queuing Command: Command Type:None, gcode:G1, cmd: G1 X81.839 Y125.360 E0.2055, tags: set(['source:file', 'filepos:558', 'fileline:18'])
2018-11-03 16:41:10,989 Received G1
2018-11-03 16:41:10,992 Position - Unable to update the extruder position, the extruder mode (relative/absolute) has been selected (absolute/relative). 
2018-11-03 16:41:10,996 Position Change - G1 X81.839 Y125.360 E0.2055 - Absolute Move From(X:79.172,Y:123.76,Z:0.2,E:0.0) - To(X:81.839,Y:125.36,Z:0.2,E:0.0) 
2018-11-03 16:41:10,997 Sent to printer: Command Type:None, gcode:G1, cmd: G1 Y125.36 X81.839, tags: set(['source:file', 'filepos:558', 'source:rewrite', 'fileline:18', 'plugin:octolapse', 'phase:queuing'])
2018-11-03 16:41:10,997 Received from printer: line:ok Q:251

2018-11-03 16:41:10,998 Queuing Command: Command Type:None, gcode:G1, cmd: G1 X82.239 Y125.493 E0.2202, tags: set(['source:file', 'filepos:587', 'fileline:19'])
2018-11-03 16:41:10,998 Received G1
2018-11-03 16:41:10,999 Position - Unable to update the extruder position, the extruder mode (relative/absolute) has been selected (absolute/relative). 
2018-11-03 16:41:10,999 Position Change - G1 X82.239 Y125.493 E0.2202 - Absolute Move From(X:81.839,Y:125.36,Z:0.2,E:0.0) - To(X:82.239,Y:125.493,Z:0.2,E:0.0) 
2018-11-03 16:41:11,003 Sent to printer: Command Type:None, gcode:G1, cmd: G1 Y125.493 X82.239, tags: set(['plugin:octolapse', 'source:file', 'fileline:19', 'source:rewrite', 'filepos:587', 'phase:queuing'])
2018-11-03 16:41:11,008 Received from printer: line:ok Q:250

2018-11-03 16:41:11,013 Queuing Command: Command Type:None, gcode:G1, cmd: G1 X82.505 Y125.760 E0.2334, tags: set(['source:file', 'fileline:20', 'filepos:616'])
2018-11-03 16:41:11,020 Received G1
2018-11-03 16:41:11,022 Position - Unable to update the extruder position, the extruder mode (relative/absolute) has been selected (absolute/relative). 
2018-11-03 16:41:11,024 Position Change - G1 X82.505 Y125.760 E0.2334 - Absolute Move From(X:82.239,Y:125.493,Z:0.2,E:0.0) - To(X:82.505,Y:125.76,Z:0.2,E:0.0) 
2018-11-03 16:41:11,030 Sent to printer: Command Type:None, gcode:G1, cmd: G1 Y125.76 X82.505, tags: set(['source:file', 'plugin:octolapse', 'source:rewrite', 'filepos:616', 'fileline:20', 'phase:queuing'])
2018-11-03 16:41:11,031 Received from printer: line:ok Q:249

2018-11-03 16:41:11,035 Queuing Command: Command Type:None, gcode:G1, cmd: G1 X82.905 Y125.893 E0.2481, tags: set(['source:file', 'fileline:21', 'filepos:645'])
2018-11-03 16:41:11,036 Received G1
2018-11-03 16:41:11,037 Position - Unable to update the extruder position, the extruder mode (relative/absolute) has been selected (absolute/relative). 
2018-11-03 16:41:11,045 Position Change - G1 X82.905 Y125.893 E0.2481 - Absolute Move From(X:82.505,Y:125.76,Z:0.2,E:0.0) - To(X:82.905,Y:125.893,Z:0.2,E:0.0) 
2018-11-03 16:41:11,045 Sent to printer: Command Type:None, gcode:G1, cmd: G1 Y125.893 X82.905, tags: set(['source:file', 'source:rewrite', 'filepos:645', 'fileline:21', 'plugin:octolapse', 'phase:queuing'])
2018-11-03 16:41:11,047 Received from printer: line:ok Q:248

2018-11-03 16:41:11,049 Queuing Command: Command Type:None, gcode:G1, cmd: G1 X83.172 Y126.159 E0.2613, tags: set(['fileline:22', 'source:file', 'filepos:674'])
2018-11-03 16:41:11,050 Received G1
2018-11-03 16:41:11,056 Position - Unable to update the extruder position, the extruder mode (relative/absolute) has been selected (absolute/relative). 
2018-11-03 16:41:11,060 Position Change - G1 X83.172 Y126.159 E0.2613 - Absolute Move From(X:82.905,Y:125.893,Z:0.2,E:0.0) - To(X:83.172,Y:126.159,Z:0.2,E:0.0) 
2018-11-03 16:41:11,061 Sent to printer: Command Type:None, gcode:G1, cmd: G1 Y126.159 X83.172, tags: set(['source:file', 'source:rewrite', 'phase:queuing', 'fileline:22', 'plugin:octolapse', 'filepos:674'])
2018-11-03 16:41:11,062 Received from printer: line:ok Q:247

2018-11-03 16:41:11,064 Queuing Command: Command Type:None, gcode:G1, cmd: G1 X83.572 Y126.293 E0.2760, tags: set(['fileline:23', 'source:file', 'filepos:703'])
2018-11-03 16:41:11,067 Received G1
2018-11-03 16:41:11,070 Position - Unable to update the extruder position, the extruder mode (relative/absolute) has been selected (absolute/relative). 
2018-11-03 16:41:11,071 Position Change - G1 X83.572 Y126.293 E0.2760 - Absolute Move From(X:83.172,Y:126.159,Z:0.2,E:0.0) - To(X:83.572,Y:126.293,Z:0.2,E:0.0) 
2018-11-03 16:41:11,072 Sent to printer: Command Type:None, gcode:G1, cmd: G1 Y126.293 X83.572, tags: set(['source:file', 'source:rewrite', 'filepos:703', 'fileline:23', 'plugin:octolapse', 'phase:queuing'])
2018-11-03 16:41:11,074 Received from printer: line:ok Q:246

2018-11-03 16:41:11,075 Queuing Command: Command Type:None, gcode:G1, cmd: G1 X84.905 Y127.093 E0.3303, tags: set(['source:file', 'filepos:732', 'fileline:24'])
2018-11-03 16:41:11,077 Received G1
2018-11-03 16:41:11,079 Position - Unable to update the extruder position, the extruder mode (relative/absolute) has been selected (absolute/relative). 
2018-11-03 16:41:11,080 Position Change - G1 X84.905 Y127.093 E0.3303 - Absolute Move From(X:83.572,Y:126.293,Z:0.2,E:0.0) - To(X:84.905,Y:127.093,Z:0.2,E:0.0) 
2018-11-03 16:41:11,081 Sent to printer: Command Type:None, gcode:G1, cmd: G1 Y127.093 X84.905, tags: set(['source:file', 'source:rewrite', 'plugin:octolapse', 'filepos:732', 'phase:queuing', 'fileline:24'])
2018-11-03 16:41:11,087 Received from printer: line:ok Q:245

2018-11-03 16:41:11,089 Queuing Command: Command Type:None, gcode:G1, cmd: G1 X85.038 Y127.226 E0.3369, tags: set(['filepos:761', 'source:file', 'fileline:25'])
2018-11-03 16:41:11,089 Received G1
2018-11-03 16:41:11,091 Position - Unable to update the extruder position, the extruder mode (relative/absolute) has been selected (absolute/relative). 
2018-11-03 16:41:11,093 Position Change - G1 X85.038 Y127.226 E0.3369 - Absolute Move From(X:84.905,Y:127.093,Z:0.2,E:0.0) - To(X:85.038,Y:127.226,Z:0.2,E:0.0) 
2018-11-03 16:41:11,095 Sent to printer: Command Type:None, gcode:G1, cmd: G1 Y127.226 X85.038, tags: set(['filepos:761', 'source:file', 'source:rewrite', 'phase:queuing', 'plugin:octolapse', 'fileline:25'])
2018-11-03 16:41:11,101 Received from printer: line:ok Q:244

2018-11-03 16:41:11,102 Queuing Command: Command Type:None, gcode:G1, cmd: G1 X85.571 Y127.226 E0.3555, tags: set(['filepos:790', 'source:file', 'fileline:26'])
2018-11-03 16:41:11,103 Received G1
2018-11-03 16:41:11,104 Position - Unable to update the extruder position, the extruder mode (relative/absolute) has been selected (absolute/relative). 
2018-11-03 16:41:11,106 Position Change - G1 X85.571 Y127.226 E0.3555 - Absolute Move From(X:85.038,Y:127.226,Z:0.2,E:0.0) - To(X:85.571,Y:127.226,Z:0.2,E:0.0) 
2018-11-03 16:41:11,107 Sent to printer: Command Type:None, gcode:G1, cmd: G1 Y127.226 X85.571, tags: set(['source:file', 'source:rewrite', 'filepos:790', 'plugin:octolapse', 'fileline:26', 'phase:queuing'])
2018-11-03 16:41:11,108 Received from printer: line:ok Q:243

2018-11-03 16:41:11,109 Queuing Command: Command Type:None, gcode:G1, cmd: G1 X85.904 Y127.026 E0.3691, tags: set(['source:file', 'fileline:27', 'filepos:819'])
2018-11-03 16:41:11,110 Received G1
2018-11-03 16:41:11,111 Position - Unable to update the extruder position, the extruder mode (relative/absolute) has been selected (absolute/relative). 
2018-11-03 16:41:11,113 Position Change - G1 X85.904 Y127.026 E0.3691 - Absolute Move From(X:85.571,Y:127.226,Z:0.2,E:0.0) - To(X:85.904,Y:127.026,Z:0.2,E:0.0) 
2018-11-03 16:41:11,115 Sent to printer: Command Type:None, gcode:G1, cmd: G1 Y127.026 X85.904, tags: set(['source:file', 'source:rewrite', 'plugin:octolapse', 'fileline:27', 'phase:queuing', 'filepos:819'])
2018-11-03 16:41:11,120 Received from printer: line:ok Q:242

[...]

2018-11-03 16:45:43,781 Queuing Command: Command Type:None, gcode:G0, cmd: G0 X60.724 Y55.837, tags: set(['source:file', 'fileline:1877', 'filepos:58328'])
2018-11-03 16:45:43,781 Received G0
2018-11-03 16:45:43,783 Position Change - G0 X60.724 Y55.837 - Absolute Move From(X:12.398,Y:83.121,Z:0.2,E:0.0) - To(X:60.724,Y:55.837,Z:0.2,E:0.0) 
2018-11-03 16:45:43,785 Sent to printer: Command Type:None, gcode:G0, cmd: G0 X60.724 Y55.837, tags: set(['source:file', 'fileline:1877', 'filepos:58328'])
2018-11-03 16:45:43,801 Received from printer: line:ok

2018-11-03 16:45:43,805 Queuing Command: Command Type:None, gcode:G0, cmd: G0 X66.807 Y58.161, tags: set(['fileline:1878', 'source:file', 'filepos:58348'])
2018-11-03 16:45:43,806 Received G0
2018-11-03 16:45:43,808 Position Change - G0 X66.807 Y58.161 - Absolute Move From(X:60.724,Y:55.837,Z:0.2,E:0.0) - To(X:66.807,Y:58.161,Z:0.2,E:0.0) 
2018-11-03 16:45:43,810 Sent to printer: Command Type:None, gcode:G0, cmd: G0 X66.807 Y58.161, tags: set(['fileline:1878', 'source:file', 'filepos:58348'])
2018-11-03 16:45:43,875 Received from printer: line:ok

2018-11-03 16:45:43,880 Queuing Command: Command Type:None, gcode:G0, cmd: G0 X72.371 Y55.297, tags: set(['fileline:1879', 'source:file', 'filepos:58368'])
2018-11-03 16:45:43,883 Received G0
2018-11-03 16:45:43,883 Position Change - G0 X72.371 Y55.297 - Absolute Move From(X:66.807,Y:58.161,Z:0.2,E:0.0) - To(X:72.371,Y:55.297,Z:0.2,E:0.0) 
2018-11-03 16:45:43,885 Sent to printer: Command Type:None, gcode:G0, cmd: G0 X72.371 Y55.297, tags: set(['fileline:1879', 'source:file', 'filepos:58368'])
2018-11-03 16:45:43,902 Received from printer: line:ok

2018-11-03 16:45:43,905 Queuing Command: Command Type:None, gcode:G0, cmd: G0 X75.383 Y54.027, tags: set(['filepos:58388', 'source:file', 'fileline:1880'])
2018-11-03 16:45:43,905 Received G0
2018-11-03 16:45:43,906 Position Change - G0 X75.383 Y54.027 - Absolute Move From(X:72.371,Y:55.297,Z:0.2,E:0.0) - To(X:75.383,Y:54.027,Z:0.2,E:0.0) 
2018-11-03 16:45:43,910 Sent to printer: Command Type:None, gcode:G0, cmd: G0 X75.383 Y54.027, tags: set(['filepos:58388', 'source:file', 'fileline:1880'])
2018-11-03 16:45:43,974 Received from printer: line:ok

2018-11-03 16:45:43,978 Queuing Command: Command Type:None, gcode:G0, cmd: G0 X78.396 Y53.336, tags: set(['source:file', 'fileline:1881', 'filepos:58408'])
2018-11-03 16:45:43,980 Received G0
2018-11-03 16:45:43,981 Position Change - G0 X78.396 Y53.336 - Absolute Move From(X:75.383,Y:54.027,Z:0.2,E:0.0) - To(X:78.396,Y:53.336,Z:0.2,E:0.0) 
2018-11-03 16:45:43,983 Sent to printer: Command Type:None, gcode:G0, cmd: G0 X78.396 Y53.336, tags: set(['source:file', 'fileline:1881', 'filepos:58408'])
2018-11-03 16:45:44,000 Received from printer: line:ok

2018-11-03 16:45:44,003 Queuing Command: Command Type:None, gcode:G0, cmd: G0 X81.382 Y53.239, tags: set(['source:file', 'filepos:58428', 'fileline:1882'])
2018-11-03 16:45:44,004 Received G0
2018-11-03 16:45:44,004 Position Change - G0 X81.382 Y53.239 - Absolute Move From(X:78.396,Y:53.336,Z:0.2,E:0.0) - To(X:81.382,Y:53.239,Z:0.2,E:0.0) 
2018-11-03 16:45:44,008 Sent to printer: Command Type:None, gcode:G0, cmd: G0 X81.382 Y53.239, tags: set(['source:file', 'filepos:58428', 'fileline:1882'])
2018-11-03 16:45:44,075 Received from printer: line:ok

2018-11-03 16:45:44,078 Queuing Command: Command Type:None, gcode:G0, cmd: G0 X84.325 Y53.737, tags: set(['source:file', 'filepos:58448', 'fileline:1883'])
2018-11-03 16:45:44,079 Received G0
2018-11-03 16:45:44,080 Position Change - G0 X84.325 Y53.737 - Absolute Move From(X:81.382,Y:53.239,Z:0.2,E:0.0) - To(X:84.325,Y:53.737,Z:0.2,E:0.0) 
2018-11-03 16:45:44,084 Sent to printer: Command Type:None, gcode:G0, cmd: G0 X84.325 Y53.737, tags: set(['source:file', 'filepos:58448', 'fileline:1883'])
2018-11-03 16:45:44,103 Received from printer: line:ok

2018-11-03 16:45:44,103 Queuing Command: Command Type:None, gcode:G0, cmd: G0 X87.219 Y54.829, tags: set(['filepos:58468', 'fileline:1884', 'source:file'])
2018-11-03 16:45:44,104 Received G0
2018-11-03 16:45:44,104 Position Change - G0 X87.219 Y54.829 - Absolute Move From(X:84.325,Y:53.737,Z:0.2,E:0.0) - To(X:87.219,Y:54.829,Z:0.2,E:0.0) 
2018-11-03 16:45:44,108 Sent to printer: Command Type:None, gcode:G0, cmd: G0 X87.219 Y54.829, tags: set(['filepos:58468', 'fileline:1884', 'source:file'])
2018-11-03 16:45:44,178 Received from printer: line:ok

2018-11-03 16:45:44,179 Queuing Command: Command Type:None, gcode:G0, cmd: G0 X90.032 Y56.492, tags: set(['fileline:1885', 'source:file', 'filepos:58488'])
2018-11-03 16:45:44,181 Received G0
2018-11-03 16:45:44,183 Position Change - G0 X90.032 Y56.492 - Absolute Move From(X:87.219,Y:54.829,Z:0.2,E:0.0) - To(X:90.032,Y:56.492,Z:0.2,E:0.0) 
2018-11-03 16:45:44,184 Sent to printer: Command Type:None, gcode:G0, cmd: G0 X90.032 Y56.492, tags: set(['fileline:1885', 'source:file', 'filepos:58488'])
2018-11-03 16:45:44,202 Received from printer: line:ok

2018-11-03 16:45:44,203 Queuing Command: Command Type:None, gcode:G0, cmd: G0 X105.171 Y67.087, tags: set(['source:file', 'fileline:1886', 'filepos:58509'])
2018-11-03 16:45:44,204 Received G0
2018-11-03 16:45:44,204 Position Change - G0 X105.171 Y67.087 - Absolute Move From(X:90.032,Y:56.492,Z:0.2,E:0.0) - To(X:105.171,Y:67.087,Z:0.2,E:0.0) 
2018-11-03 16:45:44,208 Sent to printer: Command Type:None, gcode:G0, cmd: G0 X105.171 Y67.087, tags: set(['source:file', 'fileline:1886', 'filepos:58509'])
2018-11-03 16:45:44,279 Received from printer: line:ok

2018-11-03 16:45:44,282 Queuing Command: Command Type:None, gcode:G0, cmd: G0 X78.466 Y119.625, tags: set(['source:file', 'fileline:1887', 'filepos:58530'])
2018-11-03 16:45:44,284 Received G0
2018-11-03 16:45:44,284 Position Change - G0 X78.466 Y119.625 - Absolute Move From(X:105.171,Y:67.087,Z:0.2,E:0.0) - To(X:78.466,Y:119.625,Z:0.2,E:0.0) 
2018-11-03 16:45:44,285 Sent to printer: Command Type:None, gcode:G0, cmd: G0 X78.466 Y119.625, tags: set(['source:file', 'fileline:1887', 'filepos:58530'])
2018-11-03 16:45:44,304 Received from printer: line:ok

2018-11-03 16:45:44,305 Queuing Command: Command Type:None, gcode:G0, cmd: G0 X78.466 Y119.625, tags: set(['source:file', 'fileline:1888', 'filepos:58551'])
2018-11-03 16:45:44,306 Received G0
2018-11-03 16:45:44,308 Position Change - G0 X78.466 Y119.625 - Absolute Move From(X:78.466,Y:119.625,Z:0.2,E:0.0) - To(X:78.466,Y:119.625,Z:0.2,E:0.0) 
2018-11-03 16:45:44,308 Sent to printer: Command Type:None, gcode:G0, cmd: G0 X78.466 Y119.625, tags: set(['source:file', 'fileline:1888', 'filepos:58551'])
2018-11-03 16:45:44,377 Received from printer: line:ok Q:1

2018-11-03 16:45:44,381 Queuing Command: Command Type:None, gcode:G0, cmd: G0 X78.793 Y119.806, tags: set(['source:file', 'filepos:58572', 'fileline:1889'])
2018-11-03 16:45:44,381 Received G0
2018-11-03 16:45:44,382 Position Change - G0 X78.793 Y119.806 - Absolute Move From(X:78.466,Y:119.625,Z:0.2,E:0.0) - To(X:78.793,Y:119.806,Z:0.2,E:0.0) 
2018-11-03 16:45:44,386 Sent to printer: Command Type:None, gcode:G0, cmd: G0 X78.793 Y119.806, tags: set(['source:file', 'filepos:58572', 'fileline:1889'])
2018-11-03 16:45:44,392 Received from printer: line:ok

2018-11-03 16:45:44,394 Queuing Command: Command Type:temperature_poll, gcode:M105, cmd: M105, tags: set(['trigger:comm.poll_temperature'])
2018-11-03 16:45:44,397 Sent to printer: Command Type:temperature_poll, gcode:M105, cmd: M105, tags: set(['trigger:comm.poll_temperature'])
2018-11-03 16:45:44,400 Received from printer: line:ok T:33 B:30

2018-11-03 16:45:44,405 Queuing Command: Command Type:None, gcode:G0, cmd: G0 X78.781 Y119.800, tags: set(['source:file', 'filepos:58593', 'fileline:1890'])
2018-11-03 16:45:44,405 Received G0
2018-11-03 16:45:44,410 Position Change - G0 X78.781 Y119.800 - Absolute Move From(X:78.793,Y:119.806,Z:0.2,E:0.0) - To(X:78.781,Y:119.8,Z:0.2,E:0.0) 
2018-11-03 16:45:44,412 Sent to printer: Command Type:None, gcode:G0, cmd: G0 X78.781 Y119.800, tags: set(['source:file', 'filepos:58593', 'fileline:1890'])
2018-11-03 16:45:44,418 Received from printer: line:ok

2018-11-03 16:45:44,419 Queuing Command: Command Type:None, gcode:G1, cmd: G1 X82.586 Y123.604 E332.3236 F2400, tags: set(['source:file', 'fileline:1891', 'filepos:58630'])
2018-11-03 16:45:44,420 Received G1
2018-11-03 16:45:44,420 Position - Unable to update the extruder position, the extruder mode (relative/absolute) has been selected (absolute/relative). 
2018-11-03 16:45:44,421 Position Change - G1 X82.586 Y123.604 E332.3236 F2400 - Absolute Move From(X:78.781,Y:119.8,Z:0.2,E:0.0) - To(X:82.586,Y:123.604,Z:0.2,E:0.0) 
2018-11-03 16:45:44,425 Sent to printer: Command Type:None, gcode:G1, cmd: G1 Y123.604 X82.586 F2400.0, tags: set(['source:file', 'source:rewrite', 'plugin:octolapse', 'fileline:1891', 'phase:queuing', 'filepos:58630'])
2018-11-03 16:45:44,480 Received from printer: line:ok

2018-11-03 16:45:44,481 Queuing Command: Command Type:None, gcode:G0, cmd: G0 X81.247 Y122.831 F5400, tags: set(['filepos:58657', 'fileline:1892', 'source:file'])
2018-11-03 16:45:44,483 Received G0
2018-11-03 16:45:44,484 Position Change - G0 X81.247 Y122.831 F5400 - Absolute Move From(X:82.586,Y:123.604,Z:0.2,E:0.0) - To(X:81.247,Y:122.831,Z:0.2,E:0.0) 
2018-11-03 16:45:44,487 Sent to printer: Command Type:None, gcode:G0, cmd: G0 X81.247 Y122.831 F5400, tags: set(['filepos:58657', 'fileline:1892', 'source:file'])
2018-11-03 16:45:44,502 Received from printer: line:ok

2018-11-03 16:45:44,506 Queuing Command: Command Type:None, gcode:G1, cmd: G1 X78.591 Y120.175 E332.4548 F2400, tags: set(['fileline:1893', 'source:file', 'filepos:58694'])
2018-11-03 16:45:44,509 Received G1
2018-11-03 16:45:44,510 Position - Unable to update the extruder position, the extruder mode (relative/absolute) has been selected (absolute/relative). 
2018-11-03 16:45:44,510 Position Change - G1 X78.591 Y120.175 E332.4548 F2400 - Absolute Move From(X:81.247,Y:122.831,Z:0.2,E:0.0) - To(X:78.591,Y:120.175,Z:0.2,E:0.0) 
2018-11-03 16:45:44,514 Sent to printer: Command Type:None, gcode:G1, cmd: G1 Y120.175 X78.591 F2400.0, tags: set(['fileline:1893', 'source:file', 'source:rewrite', 'filepos:58694', 'plugin:octolapse', 'phase:queuing'])
2018-11-03 16:45:44,582 Received from printer: line:ok

2018-11-03 16:45:44,583 Queuing Command: Command Type:None, gcode:G0, cmd: G0 X78.400 Y120.550 F5400, tags: set(['source:file', 'filepos:58721', 'fileline:1894'])
2018-11-03 16:45:44,585 Received G0
2018-11-03 16:45:44,586 Position Change - G0 X78.400 Y120.550 F5400 - Absolute Move From(X:78.591,Y:120.175,Z:0.2,E:0.0) - To(X:78.4,Y:120.55,Z:0.2,E:0.0) 
2018-11-03 16:45:44,588 Sent to printer: Command Type:None, gcode:G0, cmd: G0 X78.400 Y120.550 F5400, tags: set(['source:file', 'filepos:58721', 'fileline:1894'])
2018-11-03 16:45:44,606 Received from printer: line:ok

2018-11-03 16:45:44,607 Queuing Command: Command Type:None, gcode:G1, cmd: G1 X79.909 Y122.058 E332.5293 F2400, tags: set(['source:file', 'filepos:58758', 'fileline:1895'])
2018-11-03 16:45:44,610 Received G1
2018-11-03 16:45:44,612 Position - Unable to update the extruder position, the extruder mode (relative/absolute) has been selected (absolute/relative). 
2018-11-03 16:45:44,613 Position Change - G1 X79.909 Y122.058 E332.5293 F2400 - Absolute Move From(X:78.4,Y:120.55,Z:0.2,E:0.0) - To(X:79.909,Y:122.058,Z:0.2,E:0.0) 
2018-11-03 16:45:44,616 Sent to printer: Command Type:None, gcode:G1, cmd: G1 Y122.058 X79.909 F2400.0, tags: set(['source:file', 'source:rewrite', 'fileline:1895', 'filepos:58758', 'plugin:octolapse', 'phase:queuing'])
2018-11-03 16:45:44,682 Received from printer: line:ok

2018-11-03 16:45:44,686 Queuing Command: Command Type:None, gcode:G0, cmd: G0 X78.210 Y120.925 F5400, tags: set(['filepos:58785', 'source:file', 'fileline:1896'])
2018-11-03 16:45:44,687 Received G0
2018-11-03 16:45:44,688 Position Change - G0 X78.210 Y120.925 F5400 - Absolute Move From(X:79.909,Y:122.058,Z:0.2,E:0.0) - To(X:78.21,Y:120.925,Z:0.2,E:0.0) 
2018-11-03 16:45:44,691 Sent to printer: Command Type:None, gcode:G0, cmd: G0 X78.210 Y120.925 F5400, tags: set(['filepos:58785', 'source:file', 'fileline:1896'])
2018-11-03 16:45:44,709 Received from printer: line:ok

2018-11-03 16:45:44,711 Queuing Command: Command Type:None, gcode:G1, cmd: G1 X78.570 Y121.285 E332.5471 F2400, tags: set(['source:file', 'fileline:1897', 'filepos:58822'])
2018-11-03 16:45:44,712 Received G1
2018-11-03 16:45:44,713 Position - Unable to update the extruder position, the extruder mode (relative/absolute) has been selected (absolute/relative). 
2018-11-03 16:45:44,714 Position Change - G1 X78.570 Y121.285 E332.5471 F2400 - Absolute Move From(X:78.21,Y:120.925,Z:0.2,E:0.0) - To(X:78.57,Y:121.285,Z:0.2,E:0.0) 
2018-11-03 16:45:44,718 Sent to printer: Command Type:None, gcode:G1, cmd: G1 Y121.285 X78.57 F2400.0, tags: set(['source:file', 'source:rewrite', 'fileline:1897', 'plugin:octolapse', 'filepos:58822', 'phase:queuing'])
2018-11-03 16:45:44,786 Received from printer: line:ok

2018-11-03 16:45:44,788 Queuing Command: Command Type:None, gcode:M106, cmd: M106 S255, tags: set(['source:file', 'fileline:1898', 'filepos:58940'])
2018-11-03 16:45:44,794 Queuing Command: Command Type:None, gcode:G21, cmd: G21, tags: set(['filepos:58950', 'source:file', 'fileline:1899'])
2018-11-03 16:45:44,794 Received G21 - Already in millimeters.
2018-11-03 16:45:44,799 Sent to printer: Command Type:None, gcode:G21, cmd: G21, tags: set(['filepos:58950', 'source:file', 'fileline:1899'])
2018-11-03 16:46:02,234 Received from printer: line:ok Q:256

2018-11-03 16:46:02,246 Queuing Command: Command Type:temperature_poll, gcode:M105, cmd: M105, tags: set(['trigger:comm.poll_temperature'])
2018-11-03 16:46:02,260 Sent to printer: Command Type:temperature_poll, gcode:M105, cmd: M105, tags: set(['trigger:comm.poll_temperature'])
2018-11-03 16:46:02,262 Received from printer: line:ok T:33 B:30

2018-11-03 16:46:02,269 Queuing Command: Command Type:None, gcode:G90, cmd: G90, tags: set(['filepos:58961', 'source:file', 'fileline:1900'])
2018-11-03 16:46:02,271 Received G90 - Already using absolute x,y,z coordinates.
2018-11-03 16:46:02,282 Sent to printer: Command Type:None, gcode:G90, cmd: G90, tags: set(['filepos:58961', 'source:file', 'fileline:1900'])
2018-11-03 16:46:02,293 Received from printer: line:ok Q:256

2018-11-03 16:46:02,297 Queuing Command: Command Type:None, gcode:G92, cmd: G92 E0, tags: set(['source:file', 'fileline:1901', 'filepos:58981'])
2018-11-03 16:46:02,299 Received G92 - Set Position.  Command:{0}, XOffset:{1}, YOffset:0, ZOffset:0, EOffset:0.0
2018-11-03 16:46:02,304 Sent to printer: Command Type:None, gcode:G92, cmd: G92 E0, tags: set(['source:file', 'fileline:1901', 'filepos:58981'])
2018-11-03 16:46:02,312 Received from printer: line:ok Q:255

2018-11-03 16:46:02,313 Queuing Command: Command Type:None, gcode:G0, cmd: G0 F4800 E-1.0000, tags: set(['source:file', 'filepos:59017', 'fileline:1902'])
2018-11-03 16:46:02,317 Received G0
2018-11-03 16:46:02,319 Position - Unable to update the extruder position, the extruder mode (relative/absolute) has been selected (absolute/relative). 
2018-11-03 16:46:02,323 Position Change - G0 F4800 E-1.0000 - Absolute Move From(X:78.57,Y:121.285,Z:0.2,E:0.0) - To(X:78.57,Y:121.285,Z:0.2,E:0.0) 
2018-11-03 16:46:02,327 Sent to printer: Command Type:None, gcode:G0, cmd: G0 F4800.0, tags: set(['source:file', 'source:rewrite', 'plugin:octolapse', 'filepos:59017', 'phase:queuing', 'fileline:1902'])
2018-11-03 16:46:02,339 Received from printer: line:ok Q:256

2018-11-03 16:46:02,341 Queuing Command: Command Type:None, gcode:G0, cmd: G0 F1200 Z0.400, tags: set(['source:file', 'filepos:59034', 'fileline:1903'])
2018-11-03 16:46:02,342 Received G0
2018-11-03 16:46:02,356 Position Change - G0 F1200 Z0.400 - Absolute Move From(X:78.57,Y:121.285,Z:0.2,E:0.0) - To(X:78.57,Y:121.285,Z:0.4,E:0.0) 
2018-11-03 16:46:02,359 Sent to printer: Command Type:None, gcode:G0, cmd: G0 F1200 Z0.400, tags: set(['source:file', 'filepos:59034', 'fileline:1903'])
2018-11-03 16:46:02,362 Received from printer: line:ok Q:255

2018-11-03 16:46:02,364 Queuing Command: Command Type:None, gcode:G0, cmd: G0 X83.747 Y124.274 F7200, tags: set(['fileline:1904', 'source:file', 'filepos:59061'])
2018-11-03 16:46:02,365 Received G0
2018-11-03 16:46:02,367 Position Change - G0 X83.747 Y124.274 F7200 - Absolute Move From(X:78.57,Y:121.285,Z:0.4,E:0.0) - To(X:83.747,Y:124.274,Z:0.4,E:0.0) 
2018-11-03 16:46:02,368 Printer event received:ZChange.
2018-11-03 16:46:02,369 Sent to printer: Command Type:None, gcode:G0, cmd: G0 X83.747 Y124.274 F7200, tags: set(['fileline:1904', 'source:file', 'filepos:59061'])
2018-11-03 16:46:02,372 Received from printer: line:ok Q:255

2018-11-03 16:46:02,374 Queuing Command: Command Type:None, gcode:G0, cmd: G0 F4800 E0.0000, tags: set(['fileline:1905', 'source:file', 'filepos:59079'])
2018-11-03 16:46:02,376 Received G0
2018-11-03 16:46:02,378 Position - Unable to update the extruder position, the extruder mode (relative/absolute) has been selected (absolute/relative). 
2018-11-03 16:46:02,379 Position Change - G0 F4800 E0.0000 - Absolute Move From(X:83.747,Y:124.274,Z:0.4,E:0.0) - To(X:83.747,Y:124.274,Z:0.4,E:0.0) 
2018-11-03 16:46:02,383 Sent to printer: Command Type:None, gcode:G0, cmd: G0 F4800.0, tags: set(['source:file', 'source:rewrite', 'filepos:59079', 'fileline:1905', 'plugin:octolapse', 'phase:queuing'])
2018-11-03 16:46:02,391 Received from printer: line:ok Q:255

2018-11-03 16:46:02,391 Queuing Command: Command Type:None, gcode:G1, cmd: G1 X87.453 Y120.569 E0.1743 F3600, tags: set(['fileline:1906', 'source:file', 'filepos:59114'])
2018-11-03 16:46:02,394 Received G1
2018-11-03 16:46:02,395 Position - Unable to update the extruder position, the extruder mode (relative/absolute) has been selected (absolute/relative). 
2018-11-03 16:46:02,398 Position Change - G1 X87.453 Y120.569 E0.1743 F3600 - Absolute Move From(X:83.747,Y:124.274,Z:0.4,E:0.0) - To(X:87.453,Y:120.569,Z:0.4,E:0.0) 
2018-11-03 16:46:02,398 Sent to printer: Command Type:None, gcode:G1, cmd: G1 Y120.569 X87.453 F3600.0, tags: set(['plugin:octolapse', 'source:file', 'filepos:59114', 'source:rewrite', 'fileline:1906', 'phase:queuing'])
2018-11-03 16:46:02,401 Received from printer: line:ok Q:255

2018-11-03 16:46:02,404 Queuing Command: Command Type:None, gcode:G0, cmd: G0 X86.868 Y121.719 F7200, tags: set(['source:file', 'filepos:59141', 'fileline:1907'])
2018-11-03 16:46:02,407 Received G0
2018-11-03 16:46:02,407 Position Change - G0 X86.868 Y121.719 F7200 - Absolute Move From(X:87.453,Y:120.569,Z:0.4,E:0.0) - To(X:86.868,Y:121.719,Z:0.4,E:0.0) 
2018-11-03 16:46:02,411 Sent to printer: Command Type:None, gcode:G0, cmd: G0 X86.868 Y121.719 F7200, tags: set(['source:file', 'filepos:59141', 'fileline:1907'])
2018-11-03 16:46:02,417 Received from printer: line:ok Q:254

2018-11-03 16:46:02,418 Queuing Command: Command Type:None, gcode:G1, cmd: G1 X84.106 Y124.482 E0.3042 F3600, tags: set(['source:file', 'filepos:59176', 'fileline:1908'])
2018-11-03 16:46:02,419 Received G1
2018-11-03 16:46:02,419 Position - Unable to update the extruder position, the extruder mode (relative/absolute) has been selected (absolute/relative). 
2018-11-03 16:46:02,420 Position Change - G1 X84.106 Y124.482 E0.3042 F3600 - Absolute Move From(X:86.868,Y:121.719,Z:0.4,E:0.0) - To(X:84.106,Y:124.482,Z:0.4,E:0.0) 
2018-11-03 16:46:02,424 Sent to printer: Command Type:None, gcode:G1, cmd: G1 Y124.482 X84.106 F3600.0, tags: set(['source:file', 'filepos:59176', 'fileline:1908', 'source:rewrite', 'plugin:octolapse', 'phase:queuing'])
2018-11-03 16:46:02,427 Received from printer: line:ok Q:253

2018-11-03 16:46:02,430 Queuing Command: Command Type:None, gcode:G0, cmd: G0 X84.465 Y124.689 F7200, tags: set(['filepos:59203', 'source:file', 'fileline:1909'])
2018-11-03 16:46:02,433 Received G0
2018-11-03 16:46:02,434 Position Change - G0 X84.465 Y124.689 F7200 - Absolute Move From(X:84.106,Y:124.482,Z:0.4,E:0.0) - To(X:84.465,Y:124.689,Z:0.4,E:0.0) 
2018-11-03 16:46:02,436 Sent to printer: Command Type:None, gcode:G0, cmd: G0 X84.465 Y124.689 F7200, tags: set(['filepos:59203', 'source:file', 'fileline:1909'])
2018-11-03 16:46:02,441 Received from printer: line:ok Q:252

2018-11-03 16:46:02,443 Queuing Command: Command Type:None, gcode:G1, cmd: G1 X86.283 Y122.870 E0.3898 F3600, tags: set(['source:file', 'fileline:1910', 'filepos:59238'])
2018-11-03 16:46:02,444 Received G1
2018-11-03 16:46:02,446 Position - Unable to update the extruder position, the extruder mode (relative/absolute) has been selected (absolute/relative). 
2018-11-03 16:46:02,446 Position Change - G1 X86.283 Y122.870 E0.3898 F3600 - Absolute Move From(X:84.465,Y:124.689,Z:0.4,E:0.0) - To(X:86.283,Y:122.87,Z:0.4,E:0.0) 
2018-11-03 16:46:02,448 Sent to printer: Command Type:None, gcode:G1, cmd: G1 Y122.87 X86.283 F3600.0, tags: set(['source:file', 'source:rewrite', 'phase:queuing', 'filepos:59238', 'plugin:octolapse', 'fileline:1910'])
2018-11-03 16:46:02,451 Received from printer: line:ok Q:251

2018-11-03 16:46:02,458 Queuing Command: Command Type:None, gcode:G0, cmd: G0 X85.699 Y124.020 F7200, tags: set(['source:file', 'filepos:59265', 'fileline:1911'])
2018-11-03 16:46:02,461 Received G0
2018-11-03 16:46:02,464 Position Change - G0 X85.699 Y124.020 F7200 - Absolute Move From(X:86.283,Y:122.87,Z:0.4,E:0.0) - To(X:85.699,Y:124.02,Z:0.4,E:0.0) 
2018-11-03 16:46:02,465 Sent to printer: Command Type:None, gcode:G0, cmd: G0 X85.699 Y124.020 F7200, tags: set(['source:file', 'filepos:59265', 'fileline:1911'])
2018-11-03 16:46:02,469 Received from printer: line:ok Q:250

2018-11-03 16:46:02,472 Queuing Command: Command Type:None, gcode:G1, cmd: G1 X84.823 Y124.896 E0.4310 F3600, tags: set(['source:file', 'fileline:1912', 'filepos:59300'])
2018-11-03 16:46:02,475 Received G1
2018-11-03 16:46:02,478 Position - Unable to update the extruder position, the extruder mode (relative/absolute) has been selected (absolute/relative). 
2018-11-03 16:46:02,478 Position Change - G1 X84.823 Y124.896 E0.4310 F3600 - Absolute Move From(X:85.699,Y:124.02,Z:0.4,E:0.0) - To(X:84.823,Y:124.896,Z:0.4,E:0.0) 
2018-11-03 16:46:02,481 Sent to printer: Command Type:None, gcode:G1, cmd: G1 Y124.896 X84.823 F3600.0, tags: set(['source:file', 'source:rewrite', 'plugin:octolapse', 'fileline:1912', 'filepos:59300', 'phase:queuing'])
2018-11-03 16:46:02,483 Received from printer: line:ok Q:249

2018-11-03 16:46:02,489 Queuing Command: Command Type:None, gcode:G0, cmd: G0 X85.430 Y126.124 F7200, tags: set(['filepos:59347', 'source:file', 'fileline:1913'])
2018-11-03 16:46:02,491 Received G0
2018-11-03 16:46:02,495 Position Change - G0 X85.430 Y126.124 F7200 - Absolute Move From(X:84.823,Y:124.896,Z:0.4,E:0.0) - To(X:85.43,Y:126.124,Z:0.4,E:0.0) 
2018-11-03 16:46:02,498 Sent to printer: Command Type:None, gcode:G0, cmd: G0 X85.430 Y126.124 F7200, tags: set(['filepos:59347', 'source:file', 'fileline:1913'])
2018-11-03 16:46:02,501 Received from printer: line:ok Q:249