Changing monitoring state from "Offline" to "Detecting serial port"
Serial port list: ['/dev/ttyACM0']
Connecting to: /dev/ttyACM0
Changing monitoring state from "Detecting serial port" to "Opening serial port"
Connected to: Serial<id=0x6daafc10, open=True>(port='/dev/ttyACM0', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=10.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
Starting baud rate detection...
Changing monitoring state from "Opening serial port" to "Detecting baudrate"
Trying baudrate: 115200
Send: N0 M110 N0*125
Recv: start
Changing monitoring state from "Detecting baudrate" to "Operational"
Recv: start
Printer sent 'start' while already operational. External reset? Resetting line numbers to be on the safe side
Send: N1 M105*38
Recv: echo: 3.4.0-1327
Recv: echo: Last Updated: Sep 20 2018 14:44:05 | Author: (none, default config)
Recv: Compiled: Sep 20 2018
Recv: echo: Free Memory: 1933  PlannerBufferBytes: 1392
Recv: echo:Hardcoded Default Settings Loaded
Send: N0 M110 N0*125
Recv: adc_init
Recv: CrashDetect ENABLED!
Recv: PAT9125_RES_X=0
Recv: PAT9125_RES_Y=240
Recv: PAT9125_init:1
Recv: PAT9125_RES_X=0
Recv: PAT9125_RES_Y=240
Recv: PAT9125_init:1
Recv: FSensor ENABLED
Recv: echo:SD init fail
Recv: Error:No Line Number with checksum, Last Line: 0
Recv: Resend: 1
Send: N0 M110 N0*125
Recv: ok
Recv: echo:SD init fail
Recv: fsensor_autoload_check_start - autoload ENABLED
Recv: 
Recv: ok
Send: N1 M105*38
Recv: ok T:30.5 /0.0 B:30.2 /0.0 T0:30.5 /0.0 @:0 B@:0 P:31.0 A:34.0
Send: N2 M105*37
Recv: ok T:30.5 /0.0 B:30.2 /0.0 T0:30.5 /0.0 @:0 B@:0 P:31.0 A:34.3
Send: N3 M105*36
Recv: ok T:30.5 /0.0 B:30.3 /0.0 T0:30.5 /0.0 @:0 B@:0 P:31.1 A:34.1
Send: N4 M105*35
Recv: ok T:30.7 /0.0 B:30.3 /0.0 T0:30.7 /0.0 @:0 B@:0 P:31.0 A:34.0
Send: N5 M105*34
Recv: ok T:30.5 /0.0 B:30.2 /0.0 T0:30.5 /0.0 @:0 B@:0 P:31.0 A:34.3
Recv: MMU not responding - DISABLED
Send: N6 M105*33
Recv: ok T:30.7 /0.0 B:30.2 /0.0 T0:30.7 /0.0 @:0 B@:0 P:31.0 A:34.2
Send: N7 M105*32
Recv: ok T:30.5 /0.0 B:30.1 /0.0 T0:30.5 /0.0 @:0 B@:0 P:31.1 A:33.9
Send: N8 M105*47
Recv: ok T:30.5 /0.0 B:30.4 /0.0 T0:30.5 /0.0 @:0 B@:0 P:30.9 A:34.4
Send: N9 M105*46
Recv: ok T:30.5 /0.0 B:30.3 /0.0 T0:30.5 /0.0 @:0 B@:0 P:31.0 A:34.3
Send: N10 M105*22
Recv: ok T:30.6 /0.0 B:30.3 /0.0 T0:30.6 /0.0 @:0 B@:0 P:30.9 A:34.3
Send: N11 M105*23
Recv: ok T:30.6 /0.0 B:30.2 /0.0 T0:30.6 /0.0 @:0 B@:0 P:31.0 A:34.3
Send: N12 M105*20
Recv: ok T:30.5 /0.0 B:30.3 /0.0 T0:30.5 /0.0 @:0 B@:0 P:31.1 A:34.4
Send: N13 M105*21
Recv: ok T:30.5 /0.0 B:30.3 /0.0 T0:30.5 /0.0 @:0 B@:0 P:31.1 A:34.4
Send: N14 M105*18
Recv: ok T:30.6 /0.0 B:30.1 /0.0 T0:30.6 /0.0 @:0 B@:0 P:31.1 A:34.5
Send: N15 M105*19
Recv: ok T:30.5 /0.0 B:30.2 /0.0 T0:30.5 /0.0 @:0 B@:0 P:31.0 A:34.3
Send: N16 M105*16
Recv: ok T:30.5 /0.0 B:30.4 /0.0 T0:30.5 /0.0 @:0 B@:0 P:31.1 A:34.4
Send: N17 M105*17
Recv: ok T:30.5 /0.0 B:30.3 /0.0 T0:30.5 /0.0 @:0 B@:0 P:31.1 A:34.4
Send: N18 M105*30