2018-11-06 10:48:18,914 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2018-11-06 10:48:18,917 - octoprint.server - INFO - --- Log roll over detected ---------------------------------------------------
2018-11-06 10:48:18,918 - octoprint.server - INFO - OctoPrint 1.3.9
2018-11-06 10:48:18,919 - octoprint.plugin.core - INFO - 13 plugin(s) registered with the system:
|  Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/action_command_prompt
|  Announcement Plugin (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/announcements
|  Core Wizard (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/corewizard
|  CuraEngine (<= 15.04) (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/cura
|  Discovery (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/discovery
|  LED Strip Control (0.3.6) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_LEDStripControl
|  Logging (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/logging
|  OctoPi Support Plugin (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/octopi_support
|  Plugin Manager (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/pluginmanager
|  Printer Safety Check (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/printer_safety_check
|  Slicer (1.4.2) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_slicer
|  Software Update (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/softwareupdate
|  Virtual Printer (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/virtual_printer
2018-11-06 10:48:18,933 - octoprint.environment - INFO - Detected environment is Python 2.7.13 under Linux (linux2). Details:
|  hardware:
|    cores: 4
|    freq: 1200.0
|    ram: 918192128
|  os:
|    id: linux
|    platform: linux2
|  plugins:
|    octopi_support:
|      model: unknown
|      revision: a52082
|      version: 0.15.1
|  python:
|    pip: 9.0.3
|    version: 2.7.13
|    virtualenv: /home/pi/oprint
2018-11-06 10:48:18,933 - octoprint.server - INFO - ------------------------------------------------------------------------------
2018-11-06 10:48:19,482 - tornado.access - WARNING - 404 GET /cached.gif?_=1541501368303 (::ffff:192.168.178.113) 79.37ms
2018-11-06 10:48:20,491 - tornado.access - WARNING - 404 GET /cached.gif?_=1541501369358 (::ffff:192.168.178.113) 36.28ms
2018-11-06 10:48:21,261 - octoprint.server.preemptive_cache - INFO - ... done in 136508.20s
2018-11-06 10:48:21,262 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'query_string': 'l10n=en', 'path': '/', 'base_url': 'http://192.168.178.111/'}
2018-11-06 10:48:21,586 - octoprint.server.views - INFO - Found path / in cache (key: ui:_default:http://octopi.local/:en), signaling as cached
2018-11-06 10:48:28,002 - octoprint.server.preemptive_cache - INFO - ... done in 6.74s
2018-11-06 10:48:28,003 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'query_string': 'l10n=en', 'path': '/', 'base_url': 'http://192.168.178.112/'}
2018-11-06 10:48:34,649 - octoprint.server.preemptive_cache - INFO - ... done in 6.65s
2018-11-06 10:48:34,923 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.178.113
2018-11-06 10:48:37,380 - octoprint.plugins.announcements - INFO - Loaded channel _important from https://octoprint.org/feeds/important.xml in 0.24s
2018-11-06 10:48:37,903 - octoprint.plugins.announcements - INFO - Loaded channel _releases from https://octoprint.org/feeds/releases.xml in 0.21s
2018-11-06 10:48:38,200 - octoprint.plugins.announcements - INFO - Loaded channel _blog from https://octoprint.org/feeds/octoblog.xml in 0.22s
2018-11-06 10:48:38,473 - octoprint.plugins.announcements - INFO - Loaded channel _plugins from https://plugins.octoprint.org/feed.xml in 0.2s
2018-11-06 10:48:38,800 - octoprint.plugins.announcements - INFO - Loaded channel _octopi from https://octoprint.org/feeds/octopi.xml in 0.21s
2018-11-06 10:48:42,158 - octoprint.util.connectivity_checker - INFO - Connectivity changed from online to offline
2018-11-06 10:48:44,456 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python2 -m pip" as command to invoke pip
2018-11-06 10:48:44,533 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python2 -m pip" as command to invoke pip
2018-11-06 10:48:44,537 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python2 -m pip" as command to invoke pip
2018-11-06 10:48:51,786 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python2.7/site-packages/ (writable -> yes), --user flag needed -> no, virtual env -> yes
2018-11-06 10:48:51,787 - octoprint.util.pip - INFO - ==> pip ok -> yes
2018-11-06 10:48:51,877 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk
2018-11-06 10:48:52,159 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial port"
2018-11-06 10:48:52,251 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial port"
2018-11-06 10:48:52,281 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial port" to "Opening serial port"
2018-11-06 10:48:52,285 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial port" to "Detecting baudrate"
2018-11-06 10:48:52,359 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial port"
2018-11-06 10:48:52,379 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial port" to "Opening serial port"
2018-11-06 10:48:52,384 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial port" to "Detecting baudrate"
2018-11-06 10:48:52,464 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial port"
2018-11-06 10:48:52,475 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial port" to "Opening serial port"
2018-11-06 10:48:52,480 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial port" to "Detecting baudrate"
2018-11-06 10:48:52,584 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial port" to "Opening serial port"
2018-11-06 10:48:52,590 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial port" to "Detecting baudrate"
2018-11-06 10:48:53,601 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2018-11-06 10:48:53,607 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting baudrate" to "Operational"
2018-11-06 10:48:53,654 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2018-11-06 10:48:54,665 - octoprint.util.comm - INFO - Printer reports firmware name "V1.0.03  Sprinter/grbl mashup for gen6"
2018-11-06 10:50:05,965 - octoprint.plugins.cura - INFO - Running u'/usr/local/bin/cura_engine -v -p -s coolHeadLift=0 -s downSkinCount=15 -s enableCombing=1 -s endCode=M104 S0                     ;extruder heater off\nM140 S0                     ;heated bed heater off (if you have it)\nG91                                    ;relative positioning\nG1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F7200 ;move Z up a bit and retract filament even more\nG28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way\nM84                         ;steppers off\nG90                         ;absolute positioning\n;CURA_OCTO_PROFILE_STRING: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\nM117 Fine Stampa\n -s extrusionWidth=300.0 -s fanFullOnLayerNr=4 -s fanSpeedMax=28 -s fanSpeedMin=28 -s filamentDiameter=1750 -s filamentFlow=100 -s fixHorrible=1 -s gcodeFlavor=0 -s infillOverlap=15 -s infillSpeed=80 -s initialLayerSpeed=40 -s initialLayerThickness=100 -s initialSpeedupLayers=4 -s inset0Speed=70 -s insetCount=5 -s insetXSpeed=70 -s layer0extrusionWidth=300 -s layerThickness=100 -s minimalExtrusionBeforeRetraction=50 -s minimalFeedrate=10 -s minimalLayerTime=5 -s moveSpeed=120 -s multiVolumeOverlap=150 -s objectSink=0 -s perimeterBeforeInfill=1 -s postSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.\n;This code is added after the T(n)\n -s posx=100000 -s posy=99000 -s preSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.\n;This code is added before the T(n)\n -s printSpeed=70 -s retractionAmount=3000 -s retractionAmountExtruderSwitch=16500 -s retractionMinimalDistance=8000 -s retractionSpeed=40 -s retractionZHop=0 -s skinSpeed=70 -s skirtDistance=0 -s skirtLineCount=20 -s sparseInfillLineDistance=1500 -s startCode=M140 S40.0\nM109 T0 S240.0\nT0\nM190 S40.0\n\n;Basic settings: Layer height: 0.1 Walls: 1.5 Fill: 20\n;Print time: ?print_time?\n;Filament used: ?filament_amount?m ?filament_weight?g\n;Filament cost: ?filament_cost?\n;M190 S40 ;Uncomment to add your own bed temperature line\n;M109 S240 ;Uncomment to add your own temperature line\nG21        ;metric values\nG90        ;absolute positioning\nM82        ;set extruder to absolute mode\nM107       ;start with the fan off\nG28 X0 Y0  ;move X/Y to min endstops\nG28 Z0     ;move Z to min endstops\nG1 Z15.0 F7200 ;move the platform down 15mm\nG92 E0                  ;zero the extruded length\nG1 F200 E3              ;extrude 3mm of feed stock\nG92 E0                  ;zero the extruded length again\nG1 F7200\n;Put printing message on LCD screen\nM117 Stampando...\n -s supportAngle=60 -s supportEverywhere=0 -s supportExtruder=-1 -s supportLineDistance=1500 -s supportType=1 -s supportXYDistance=700 -s supportZDistance=150 -s upSkinCount=15 -o /tmp/tmpXeMHZp.gco /home/pi/.octoprint/uploads/3.6mm_pi_cam_front.tmp.1541501472701.stl' in /usr/local/bin
2018-11-06 10:51:18,185 - octoprint.plugins.cura - INFO - Running u'/usr/local/bin/cura_engine -v -p -s coolHeadLift=0 -s downSkinCount=15 -s enableCombing=1 -s endCode=M104 S0                     ;extruder heater off\nM140 S0                     ;heated bed heater off (if you have it)\nG91                                    ;relative positioning\nG1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F7200 ;move Z up a bit and retract filament even more\nG28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way\nM84                         ;steppers off\nG90                         ;absolute positioning\n;CURA_OCTO_PROFILE_STRING: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\nM117 Fine Stampa\n -s extrusionWidth=300.0 -s fanFullOnLayerNr=4 -s fanSpeedMax=28 -s fanSpeedMin=28 -s filamentDiameter=1750 -s filamentFlow=100 -s fixHorrible=1 -s gcodeFlavor=0 -s infillOverlap=15 -s infillSpeed=80 -s initialLayerSpeed=40 -s initialLayerThickness=100 -s initialSpeedupLayers=4 -s inset0Speed=70 -s insetCount=5 -s insetXSpeed=70 -s layer0extrusionWidth=300 -s layerThickness=100 -s minimalExtrusionBeforeRetraction=50 -s minimalFeedrate=10 -s minimalLayerTime=5 -s moveSpeed=120 -s multiVolumeOverlap=150 -s objectSink=0 -s perimeterBeforeInfill=1 -s postSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.\n;This code is added after the T(n)\n -s posx=100000 -s posy=99000 -s preSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.\n;This code is added before the T(n)\n -s printSpeed=70 -s retractionAmount=3000 -s retractionAmountExtruderSwitch=16500 -s retractionMinimalDistance=8000 -s retractionSpeed=40 -s retractionZHop=0 -s skinSpeed=70 -s skirtDistance=0 -s skirtLineCount=20 -s sparseInfillLineDistance=1500 -s startCode=M140 S40.0\nM109 T0 S240.0\nT0\nM190 S40.0\n\n;Basic settings: Layer height: 0.1 Walls: 1.5 Fill: 20\n;Print time: ?print_time?\n;Filament used: ?filament_amount?m ?filament_weight?g\n;Filament cost: ?filament_cost?\n;M190 S40 ;Uncomment to add your own bed temperature line\n;M109 S240 ;Uncomment to add your own temperature line\nG21        ;metric values\nG90        ;absolute positioning\nM82        ;set extruder to absolute mode\nM107       ;start with the fan off\nG28 X0 Y0  ;move X/Y to min endstops\nG28 Z0     ;move Z to min endstops\nG1 Z15.0 F7200 ;move the platform down 15mm\nG92 E0                  ;zero the extruded length\nG1 F200 E3              ;extrude 3mm of feed stock\nG92 E0                  ;zero the extruded length again\nG1 F7200\n;Put printing message on LCD screen\nM117 Stampando...\n -s supportAngle=60 -s supportEverywhere=0 -s supportExtruder=-1 -s supportLineDistance=1500 -s supportType=1 -s supportXYDistance=700 -s supportZDistance=150 -s upSkinCount=15 -o /tmp/tmpjAcx29.gco /home/pi/.octoprint/uploads/3.6mm_pi_cam_back.tmp.1541501545299.stl' in /usr/local/bin
2018-11-06 10:52:47,245 - octoprint.plugins.cura - INFO - Running u'/usr/local/bin/cura_engine -v -p -s coolHeadLift=0 -s downSkinCount=15 -s enableCombing=1 -s endCode=M104 S0                     ;extruder heater off\nM140 S0                     ;heated bed heater off (if you have it)\nG91                                    ;relative positioning\nG1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F7200 ;move Z up a bit and retract filament even more\nG28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way\nM84                         ;steppers off\nG90                         ;absolute positioning\n;CURA_OCTO_PROFILE_STRING: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\nM117 Fine Stampa\n -s extrusionWidth=300.0 -s fanFullOnLayerNr=4 -s fanSpeedMax=28 -s fanSpeedMin=28 -s filamentDiameter=1750 -s filamentFlow=100 -s fixHorrible=1 -s gcodeFlavor=0 -s infillOverlap=15 -s infillSpeed=80 -s initialLayerSpeed=40 -s initialLayerThickness=100 -s initialSpeedupLayers=4 -s inset0Speed=70 -s insetCount=5 -s insetXSpeed=70 -s layer0extrusionWidth=300 -s layerThickness=100 -s minimalExtrusionBeforeRetraction=50 -s minimalFeedrate=10 -s minimalLayerTime=5 -s moveSpeed=120 -s multiVolumeOverlap=150 -s objectSink=0 -s perimeterBeforeInfill=1 -s postSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.\n;This code is added after the T(n)\n -s posx=111000 -s posy=105000 -s preSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.\n;This code is added before the T(n)\n -s printSpeed=70 -s retractionAmount=3000 -s retractionAmountExtruderSwitch=16500 -s retractionMinimalDistance=8000 -s retractionSpeed=40 -s retractionZHop=0 -s skinSpeed=70 -s skirtDistance=0 -s skirtLineCount=20 -s sparseInfillLineDistance=1500 -s startCode=M140 S40.0\nM109 T0 S240.0\nT0\nM190 S40.0\n\n;Basic settings: Layer height: 0.1 Walls: 1.5 Fill: 20\n;Print time: ?print_time?\n;Filament used: ?filament_amount?m ?filament_weight?g\n;Filament cost: ?filament_cost?\n;M190 S40 ;Uncomment to add your own bed temperature line\n;M109 S240 ;Uncomment to add your own temperature line\nG21        ;metric values\nG90        ;absolute positioning\nM82        ;set extruder to absolute mode\nM107       ;start with the fan off\nG28 X0 Y0  ;move X/Y to min endstops\nG28 Z0     ;move Z to min endstops\nG1 Z15.0 F7200 ;move the platform down 15mm\nG92 E0                  ;zero the extruded length\nG1 F200 E3              ;extrude 3mm of feed stock\nG92 E0                  ;zero the extruded length again\nG1 F7200\n;Put printing message on LCD screen\nM117 Stampando...\n -s supportAngle=60 -s supportEverywhere=0 -s supportExtruder=-1 -s supportLineDistance=1500 -s supportType=1 -s supportXYDistance=700 -s supportZDistance=150 -s upSkinCount=15 -o /tmp/tmp6EkdJ7.gco /home/pi/.octoprint/uploads/arm_junction.tmp.1541501634013.stl' in /usr/local/bin
2018-11-06 10:53:51,561 - octoprint.plugins.cura - INFO - Running u'/usr/local/bin/cura_engine -v -p -s coolHeadLift=0 -s downSkinCount=15 -s enableCombing=1 -s endCode=M104 S0                     ;extruder heater off\nM140 S0                     ;heated bed heater off (if you have it)\nG91                                    ;relative positioning\nG1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F7200 ;move Z up a bit and retract filament even more\nG28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way\nM84                         ;steppers off\nG90                         ;absolute positioning\n;CURA_OCTO_PROFILE_STRING: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\nM117 Fine Stampa\n -s extrusionWidth=300.0 -s fanFullOnLayerNr=4 -s fanSpeedMax=28 -s fanSpeedMin=28 -s filamentDiameter=1750 -s filamentFlow=100 -s fixHorrible=1 -s gcodeFlavor=0 -s infillOverlap=15 -s infillSpeed=80 -s initialLayerSpeed=40 -s initialLayerThickness=100 -s initialSpeedupLayers=4 -s inset0Speed=70 -s insetCount=5 -s insetXSpeed=70 -s layer0extrusionWidth=300 -s layerThickness=100 -s minimalExtrusionBeforeRetraction=50 -s minimalFeedrate=10 -s minimalLayerTime=5 -s moveSpeed=120 -s multiVolumeOverlap=150 -s objectSink=0 -s perimeterBeforeInfill=1 -s postSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.\n;This code is added after the T(n)\n -s posx=100000 -s posy=99000 -s preSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.\n;This code is added before the T(n)\n -s printSpeed=70 -s retractionAmount=3000 -s retractionAmountExtruderSwitch=16500 -s retractionMinimalDistance=8000 -s retractionSpeed=40 -s retractionZHop=0 -s skinSpeed=70 -s skirtDistance=3000 -s skirtLineCount=1 -s skirtMinLength=150000 -s sparseInfillLineDistance=1500 -s startCode=M140 S40.0\nM109 T0 S240.0\nT0\nM190 S40.0\n\n;Basic settings: Layer height: 0.1 Walls: 1.5 Fill: 20\n;Print time: ?print_time?\n;Filament used: ?filament_amount?m ?filament_weight?g\n;Filament cost: ?filament_cost?\n;M190 S40 ;Uncomment to add your own bed temperature line\n;M109 S240 ;Uncomment to add your own temperature line\nG21        ;metric values\nG90        ;absolute positioning\nM82        ;set extruder to absolute mode\nM107       ;start with the fan off\nG28 X0 Y0  ;move X/Y to min endstops\nG28 Z0     ;move Z to min endstops\nG1 Z15.0 F7200 ;move the platform down 15mm\nG92 E0                  ;zero the extruded length\nG1 F200 E3              ;extrude 3mm of feed stock\nG92 E0                  ;zero the extruded length again\nG1 F7200\n;Put printing message on LCD screen\nM117 Stampando...\n -s supportAngle=60 -s supportEverywhere=0 -s supportExtruder=-1 -s supportLineDistance=1500 -s supportType=1 -s supportXYDistance=700 -s supportZDistance=150 -s upSkinCount=15 -o /tmp/tmpd1peyM.gco /home/pi/.octoprint/uploads/arm_junction.tmp.1541501698859.stl' in /usr/local/bin
2018-11-06 10:54:53,091 - octoprint.plugins.cura - INFO - Running u'/usr/local/bin/cura_engine -v -p -s coolHeadLift=0 -s downSkinCount=15 -s enableCombing=1 -s endCode=M104 S0                     ;extruder heater off\nM140 S0                     ;heated bed heater off (if you have it)\nG91                                    ;relative positioning\nG1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F7200 ;move Z up a bit and retract filament even more\nG28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way\nM84                         ;steppers off\nG90                         ;absolute positioning\n;CURA_OCTO_PROFILE_STRING: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\nM117 Fine Stampa\n -s extrusionWidth=300.0 -s fanFullOnLayerNr=4 -s fanSpeedMax=28 -s fanSpeedMin=28 -s filamentDiameter=1750 -s filamentFlow=100 -s fixHorrible=1 -s gcodeFlavor=0 -s infillOverlap=15 -s infillSpeed=80 -s initialLayerSpeed=40 -s initialLayerThickness=100 -s initialSpeedupLayers=4 -s inset0Speed=70 -s insetCount=5 -s insetXSpeed=70 -s layer0extrusionWidth=300 -s layerThickness=100 -s minimalExtrusionBeforeRetraction=50 -s minimalFeedrate=10 -s minimalLayerTime=5 -s moveSpeed=120 -s multiVolumeOverlap=150 -s objectSink=0 -s perimeterBeforeInfill=1 -s postSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.\n;This code is added after the T(n)\n -s posx=100000 -s posy=99000 -s preSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.\n;This code is added before the T(n)\n -s printSpeed=70 -s retractionAmount=3000 -s retractionAmountExtruderSwitch=16500 -s retractionMinimalDistance=8000 -s retractionSpeed=40 -s retractionZHop=0 -s skinSpeed=70 -s skirtDistance=0 -s skirtLineCount=20 -s sparseInfillLineDistance=1500 -s startCode=M140 S40.0\nM109 T0 S240.0\nT0\nM190 S40.0\n\n;Basic settings: Layer height: 0.1 Walls: 1.5 Fill: 20\n;Print time: ?print_time?\n;Filament used: ?filament_amount?m ?filament_weight?g\n;Filament cost: ?filament_cost?\n;M190 S40 ;Uncomment to add your own bed temperature line\n;M109 S240 ;Uncomment to add your own temperature line\nG21        ;metric values\nG90        ;absolute positioning\nM82        ;set extruder to absolute mode\nM107       ;start with the fan off\nG28 X0 Y0  ;move X/Y to min endstops\nG28 Z0     ;move Z to min endstops\nG1 Z15.0 F7200 ;move the platform down 15mm\nG92 E0                  ;zero the extruded length\nG1 F200 E3              ;extrude 3mm of feed stock\nG92 E0                  ;zero the extruded length again\nG1 F7200\n;Put printing message on LCD screen\nM117 Stampando...\n -s supportAngle=60 -s supportEverywhere=1 -s supportExtruder=-1 -s supportLineDistance=1500 -s supportType=1 -s supportXYDistance=700 -s supportZDistance=150 -s upSkinCount=15 -o /tmp/tmpCXp2n7.gco /home/pi/.octoprint/uploads/arm.tmp.1541501760355.stl' in /usr/local/bin
2018-11-06 10:56:28,639 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Printing"
2018-11-06 10:56:28,664 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2018-11-06 10:57:04,580 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Cancelling"
2018-11-06 10:57:09,966 - octoprint.util.comm - INFO - Changing monitoring state from "Cancelling" to "Operational"
2018-11-06 10:59:28,268 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Printing"
2018-11-06 10:59:28,284 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2018-11-06 11:00:44,854 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.178.113
2018-11-06 11:00:45,983 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.178.113
2018-11-06 11:00:49,150 - octoprint.util.connectivity_checker - INFO - Connectivity changed from offline to online
2018-11-06 11:00:49,607 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from https://plugins.octoprint.org/plugins.json
2018-11-06 11:00:50,184 - octoprint.plugins.pluginmanager - INFO - Loaded plugin notices data from https://plugins.octoprint.org/notices.json
2018-11-06 11:00:50,351 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk
2018-11-06 11:00:53,704 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Cancelling"
2018-11-06 11:01:04,519 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2018-11-06 11:01:09,431 - octoprint.util.comm - INFO - Changing monitoring state from "Cancelling" to "Operational"
2018-11-06 11:01:11,004 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Printing"
2018-11-06 11:01:11,028 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2018-11-06 11:01:47,976 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Cancelling"
2018-11-06 11:02:12,510 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2018-11-06 11:02:13,005 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.178.113
2018-11-06 11:02:13,793 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.178.113
2018-11-06 11:02:17,239 - octoprint.util.comm - INFO - Changing monitoring state from "Cancelling" to "Operational"
2018-11-06 11:02:52,186 - octoprint.plugins.cura - INFO - Running u'/usr/local/bin/cura_engine -v -p -s coolHeadLift=0 -s downSkinCount=15 -s enableCombing=1 -s endCode=M104 S0                     ;extruder heater off\nM140 S0                     ;heated bed heater off (if you have it)\nG91                                    ;relative positioning\nG1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F7200 ;move Z up a bit and retract filament even more\nG28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way\nM84                         ;steppers off\nG90                         ;absolute positioning\n;CURA_OCTO_PROFILE_STRING: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\nM117 Fine Stampa\n -s extrusionWidth=300.0 -s fanFullOnLayerNr=4 -s fanSpeedMax=28 -s fanSpeedMin=28 -s filamentDiameter=1750 -s filamentFlow=100 -s fixHorrible=1 -s gcodeFlavor=0 -s infillOverlap=15 -s infillSpeed=80 -s initialLayerSpeed=40 -s initialLayerThickness=100 -s initialSpeedupLayers=4 -s inset0Speed=70 -s insetCount=5 -s insetXSpeed=70 -s layer0extrusionWidth=300 -s layerThickness=100 -s minimalExtrusionBeforeRetraction=50 -s minimalFeedrate=10 -s minimalLayerTime=5 -s moveSpeed=120 -s multiVolumeOverlap=150 -s objectSink=0 -s perimeterBeforeInfill=1 -s postSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.\n;This code is added after the T(n)\n -s posx=100000 -s posy=99000 -s preSwitchExtruderCode=;Switch between the current extruder and the next extruder, when printing with multiple extruders.\n;This code is added before the T(n)\n -s printSpeed=70 -s retractionAmount=3000 -s retractionAmountExtruderSwitch=16500 -s retractionMinimalDistance=8000 -s retractionSpeed=40 -s retractionZHop=0 -s skinSpeed=70 -s skirtDistance=0 -s skirtLineCount=20 -s sparseInfillLineDistance=1500 -s startCode=M140 S40.0\nM109 T0 S240.0\nT0\nM190 S40.0\n\n;Basic settings: Layer height: 0.1 Walls: 1.5 Fill: 20\n;Print time: ?print_time?\n;Filament used: ?filament_amount?m ?filament_weight?g\n;Filament cost: ?filament_cost?\n;M190 S40 ;Uncomment to add your own bed temperature line\n;M109 S240 ;Uncomment to add your own temperature line\nG21        ;metric values\nG90        ;absolute positioning\nM82        ;set extruder to absolute mode\nM107       ;start with the fan off\nG28 X0 Y0  ;move X/Y to min endstops\nG28 Z0     ;move Z to min endstops\nG1 Z15.0 F7200 ;move the platform down 15mm\nG92 E0                  ;zero the extruded length\nG1 F200 E3              ;extrude 3mm of feed stock\nG92 E0                  ;zero the extruded length again\nG1 F7200\n;Put printing message on LCD screen\nM117 Stampando...\n -s supportAngle=60 -s supportEverywhere=0 -s supportExtruder=-1 -s supportLineDistance=1500 -s supportType=1 -s supportXYDistance=700 -s supportZDistance=150 -s upSkinCount=15 -o /tmp/tmp3knNtK.gco /home/pi/.octoprint/uploads/3.6mm_pi_cam_front.tmp.1541502238937.stl' in /usr/local/bin
2018-11-06 11:03:18,916 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2018-11-06 11:03:55,328 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Printing"
2018-11-06 11:03:55,340 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2018-11-06 11:04:58,900 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2018-11-06 11:05:28,944 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2018-11-06 11:05:28,965 - octoprint.util.comm - INFO - Externally triggered heatup detected
2018-11-06 11:05:58,994 - octoprint.util.comm - INFO - Timeout while in an active heatup, considering heatup to be over.
2018-11-06 11:06:29,027 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2018-11-06 11:06:29,077 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 28, current line = 29
| Last lines in terminal:
| Recv: ok
| Send: N21 G1 X83.790 Y74.564 E0.06571*85
| Recv: ok
| Send: N22 G1 X86.052 Y74.560 E0.09392*90
| Recv: ok
| Send: N23 G1 X88.763 Y74.566 E0.12773*87
| Communication timeout while printing, trying to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
| Send: N24 M105*17
| Communication timeout while printing, trying to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
| Send: N25 M105*16
| Recv: o-�ok T:239.7 /240.0 B:41.1 /40.0 T0:239.7 /240.0 @:49 B@:0�ok T:240.4 /240.0 B:40.2 /40.0 T0:240.4 /240.0 @:43 B@:0
| Communication timeout while printing, trying to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
| Send: N26 M105*19
| Recv: ok T:240.0 /240.0 B:40.6 /40.0 T0:240.0 /240.0 @:45 B@:0
| Send: N27 M105*18
| Recv: ok T:240.0 /240.0 B:40.6 /40.0 T0:240.0 /240.0 @:45 B@:0
| Send: N24 M105*17
| Send: N28 G1 X89.739 Y74.566 E0.13991*81
| Recv: Error:Line Number is not Last Line Number+1, Last Line: 27
| Recv: Resend: 28
2018-11-06 11:16:09,181 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2018-11-06 11:17:45,771 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2018-11-06 11:18:16,910 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2018-11-06 11:18:16,932 - octoprint.util.comm - INFO - Externally triggered heatup detected
2018-11-06 11:18:18,918 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2018-11-06 11:18:46,970 - octoprint.util.comm - INFO - Timeout while in an active heatup, considering heatup to be over.
2018-11-06 11:19:17,002 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2018-11-06 11:19:55,556 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2018-11-06 11:20:26,428 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2018-11-06 11:20:26,448 - octoprint.util.comm - INFO - Externally triggered heatup detected
2018-11-06 11:20:56,487 - octoprint.util.comm - INFO - Timeout while in an active heatup, considering heatup to be over.
2018-11-06 11:21:26,520 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2018-11-06 11:21:56,584 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2018-11-06 11:22:27,306 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2018-11-06 11:22:27,328 - octoprint.util.comm - INFO - Externally triggered heatup detected
2018-11-06 11:22:57,366 - octoprint.util.comm - INFO - Timeout while in an active heatup, considering heatup to be over.
2018-11-06 11:23:27,376 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2018-11-06 11:23:57,536 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2018-11-06 11:24:00,599 - octoprint.util.comm - INFO - Externally triggered heatup detected
2018-11-06 11:24:30,639 - octoprint.util.comm - INFO - Timeout while in an active heatup, considering heatup to be over.
2018-11-06 11:25:00,672 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2018-11-06 11:25:30,936 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2018-11-06 11:26:03,323 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2018-11-06 11:26:03,339 - octoprint.util.comm - INFO - Externally triggered heatup detected
2018-11-06 11:26:33,375 - octoprint.util.comm - INFO - Timeout while in an active heatup, considering heatup to be over.
2018-11-06 11:27:03,407 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2018-11-06 11:27:34,755 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2018-11-06 11:28:05,404 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2018-11-06 11:28:05,435 - octoprint.util.comm - INFO - Externally triggered heatup detected
2018-11-06 11:28:35,471 - octoprint.util.comm - INFO - Timeout while in an active heatup, considering heatup to be over.
2018-11-06 11:29:05,503 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2018-11-06 11:29:36,970 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2018-11-06 11:29:36,986 - octoprint.util.comm - INFO - Externally triggered heatup detected
2018-11-06 11:30:07,001 - octoprint.util.comm - INFO - Timeout while in an active heatup, considering heatup to be over.
2018-11-06 11:30:37,011 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2018-11-06 11:31:07,623 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2018-11-06 11:31:41,114 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2018-11-06 11:32:14,277 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2018-11-06 11:32:14,293 - octoprint.util.comm - INFO - Externally triggered heatup detected
2018-11-06 11:32:44,324 - octoprint.util.comm - INFO - Timeout while in an active heatup, considering heatup to be over.
2018-11-06 11:33:14,330 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2018-11-06 11:33:18,921 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2018-11-06 11:33:48,949 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2018-11-06 11:34:23,320 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2018-11-06 11:34:23,335 - octoprint.util.comm - INFO - Externally triggered heatup detected
2018-11-06 11:34:53,345 - octoprint.util.comm - INFO - Timeout while in an active heatup, considering heatup to be over.
2018-11-06 11:35:23,377 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2018-11-06 11:36:14,093 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2018-11-06 11:36:49,792 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2018-11-06 11:37:20,081 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2018-11-06 11:37:52,668 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2018-11-06 11:37:52,684 - octoprint.util.comm - INFO - Externally triggered heatup detected
2018-11-06 11:38:22,720 - octoprint.util.comm - INFO - Timeout while in an active heatup, considering heatup to be over.
2018-11-06 11:38:52,752 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2018-11-06 11:39:30,372 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2018-11-06 11:39:30,391 - octoprint.util.comm - INFO - Externally triggered heatup detected
2018-11-06 11:40:00,403 - octoprint.util.comm - INFO - Timeout while in an active heatup, considering heatup to be over.
2018-11-06 11:40:30,426 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2018-11-06 11:41:11,664 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2018-11-06 11:42:21,069 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2018-11-06 11:43:02,353 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2018-11-06 11:43:35,240 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2018-11-06 11:44:15,052 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2018-11-06 11:44:15,075 - octoprint.util.comm - INFO - Externally triggered heatup detected
2018-11-06 11:44:45,096 - octoprint.util.comm - INFO - Timeout while in an active heatup, considering heatup to be over.
2018-11-06 11:45:15,117 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2018-11-06 11:45:48,164 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2018-11-06 11:46:22,611 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2018-11-06 11:46:55,508 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2018-11-06 11:47:25,539 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2018-11-06 11:47:58,217 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2018-11-06 11:48:18,924 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2018-11-06 11:48:32,460 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2018-11-06 11:48:32,479 - octoprint.util.comm - INFO - Externally triggered heatup detected
2018-11-06 11:49:02,513 - octoprint.util.comm - INFO - Timeout while in an active heatup, considering heatup to be over.
2018-11-06 11:49:32,545 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2018-11-06 11:50:02,639 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2018-11-06 11:50:02,661 - octoprint.util.comm - INFO - Externally triggered heatup detected
2018-11-06 11:50:32,695 - octoprint.util.comm - INFO - Timeout while in an active heatup, considering heatup to be over.
2018-11-06 11:50:45,993 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Cancelling"
2018-11-06 11:51:02,726 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2018-11-06 11:51:10,053 - octoprint.util.comm - INFO - Changing monitoring state from "Cancelling" to "Operational"
2018-11-06 11:51:39,499 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.178.113
2018-11-06 11:51:47,597 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.178.113
2018-11-06 11:51:55,841 - octoprint.util.comm - INFO - Communication timeout while idle, trying to trigger response from printer.
2018-11-06 12:03:18,925 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2018-11-06 12:03:21,444 - tornado.access - WARNING - 404 GET /downloads/files/local/3.6mm_pi_cam_front.gco (::ffff:192.168.178.113) 19.81ms
2018-11-06 11:17:08,672 - octoprint.startup - INFO - ******************************************************************************
2018-11-06 11:17:08,674 - octoprint.startup - INFO - Starting OctoPrint 1.3.9
2018-11-06 11:17:08,680 - octoprint.startup - INFO - ******************************************************************************
2018-11-06 11:17:08,765 - octoprint.startup - INFO - We don't appear to be online, not fetching plugin blacklist
2018-11-06 11:17:08,837 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages...
2018-11-06 11:17:11,741 - octoprint.plugin.core - INFO - Found 13 plugin(s) providing 13 mixin implementations, 11 hook handlers
2018-11-06 11:17:11,748 - octoprint.server.heartbeat - INFO - Starting server heartbeat, 900.0s interval
2018-11-06 11:17:11,819 - octoprint.server - INFO - Intermediary server started
2018-11-06 11:17:11,820 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages...
2018-11-06 11:17:12,445 - octoprint.plugin.core - INFO - Found 13 plugin(s) providing 13 mixin implementations, 11 hook handlers
2018-11-06 11:17:12,492 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/pi/.octoprint/uploads...
2018-11-06 11:17:12,498 - octoprint.filemanager.storage - INFO - ... file metadata for /home/pi/.octoprint/uploads initialized successfully.
2018-11-06 11:17:12,583 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk
2018-11-06 11:17:15,265 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python2 -m pip" as command to invoke pip
2018-11-06 11:17:17,368 - octoprint.util.pip - INFO - Version of pip is 9.0.3
2018-11-06 11:17:17,369 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python2.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes
2018-11-06 11:17:17,384 - octoprint.util.pip - INFO - ==> pip ok -> yes
2018-11-06 11:17:17,387 - octoprint.plugin.core - INFO - Initialized 13 plugin implementation(s)
2018-11-06 11:17:17,400 - octoprint.plugin.core - INFO - 13 plugin(s) registered with the system:
|  Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/action_command_prompt
|  Announcement Plugin (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/announcements
|  Core Wizard (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/corewizard
|  CuraEngine (<= 15.04) (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/cura
|  Discovery (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/discovery
|  LED Strip Control (0.3.6) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_LEDStripControl
|  Logging (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/logging
|  OctoPi Support Plugin (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/octopi_support
|  Plugin Manager (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/pluginmanager
|  Printer Safety Check (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/printer_safety_check
|  Slicer (1.4.2) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_slicer
|  Software Update (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/softwareupdate
|  Virtual Printer (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/virtual_printer
2018-11-06 11:17:17,426 - octoprint.environment - INFO - Detected environment is Python 2.7.13 under Linux (linux2). Details:
|  hardware:
|    cores: 4
|    freq: 1200.0
|    ram: 918192128
|  os:
|    id: linux
|    platform: linux2
|  plugins:
|    octopi_support:
|      model: unknown
|      revision: a52082
|      version: 0.15.1
|  python:
|    pip: 9.0.3
|    version: 2.7.13
|    virtualenv: /home/pi/oprint
2018-11-06 11:17:17,440 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/webassets...
2018-11-06 11:17:17,457 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-cache...
2018-11-06 11:17:17,704 - octoprint.server - INFO - Shutting down intermediary server...
2018-11-06 11:17:17,835 - octoprint.server - INFO - Intermediary server shut down
2018-11-06 11:17:17,838 - octoprint.events - INFO - Processing startup event, this is our first event
2018-11-06 11:17:17,838 - octoprint.events - INFO - Adding 0 events to queue that were held back before startup event
2018-11-06 11:17:17,841 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue...
2018-11-06 11:17:17,847 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue
2018-11-06 11:17:17,863 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance on octopi for _http._tcp
2018-11-06 11:17:17,881 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance on octopi for _octoprint._tcp
2018-11-06 11:17:17,888 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance on octopi for SSDP
2018-11-06 11:17:17,907 - octoprint.server - INFO - Listening on http://127.0.0.1:5000
2018-11-06 11:17:17,970 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid
2018-11-06 11:17:18,082 - octoprint.util.connectivity_checker - INFO - Connectivity changed from offline to online
2018-11-06 11:17:18,366 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid
2018-11-06 11:17:18,523 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid
2018-11-06 11:17:18,955 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'query_string': 'l10n=en', 'path': '/', 'base_url': 'http://octopi.local/'}
2018-11-06 11:17:19,393 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid
2018-11-06 15:00:09,873 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2018-11-06 15:00:24,735 - octoprint.server.preemptive_cache - INFO - ... done in 13385.78s
2018-11-06 15:00:24,737 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'query_string': 'l10n=en', 'path': '/', 'base_url': 'http://192.168.178.111/'}
2018-11-06 15:00:32,276 - octoprint.server.preemptive_cache - INFO - ... done in 7.54s
2018-11-06 15:00:32,276 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'query_string': 'l10n=en', 'path': '/', 'base_url': 'http://192.168.178.112/'}
2018-11-06 15:00:32,721 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.178.113
2018-11-06 15:00:40,450 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial port"
2018-11-06 15:00:40,577 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial port" to "Opening serial port"
2018-11-06 15:00:40,583 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial port" to "Detecting baudrate"
2018-11-06 15:00:40,751 - octoprint.server.preemptive_cache - INFO - ... done in 8.47s
2018-11-06 15:00:41,642 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2018-11-06 15:00:41,649 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting baudrate" to "Operational"
2018-11-06 15:00:41,664 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2018-11-06 15:00:42,946 - octoprint.util.comm - INFO - Printer reports firmware name "V1.0.03  Sprinter/grbl mashup for gen6"
2018-11-06 15:00:47,291 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Offline"
2018-11-06 15:00:53,315 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial port"
2018-11-06 15:00:53,343 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial port" to "Opening serial port"
2018-11-06 15:00:53,347 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial port" to "Detecting baudrate"
2018-11-06 15:00:54,358 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2018-11-06 15:00:54,363 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting baudrate" to "Operational"
2018-11-06 15:00:54,369 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2018-11-06 15:00:55,729 - octoprint.util.comm - INFO - Printer reports firmware name "V1.0.03  Sprinter/grbl mashup for gen6"