2018-11-17 22:03:30,375 - serial.log is currently not enabled, you can enable it via Settings > Serial Connection > Log communication to serial.log 2018-11-20 00:21:54,712 - Enabling serial logging 2018-11-20 00:22:32,337 - Connecting to: /dev/ttyACM0 2018-11-20 00:22:32,386 - Changing monitoring state from "Offline" to "Opening serial port" 2018-11-20 00:22:32,391 - Connected to: Serial(port='/dev/ttyACM0', baudrate=250000, bytesize=8, parity='N', stopbits=1, timeout=10.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor 2018-11-20 00:22:32,391 - Changing monitoring state from "Opening serial port" to "Connecting" 2018-11-20 00:22:32,396 - Send: N0 M110 N0*125 2018-11-20 00:22:33,456 - Recv: start 2018-11-20 00:22:33,463 - Send: N0 M110 N0*125 2018-11-20 00:22:33,464 - Recv: echo:Marlin 1.1.9 2018-11-20 00:22:33,465 - Recv: 2018-11-20 00:22:33,466 - Recv: echo: Last Updated: Sep 10 201815:47:32 | Author: (Aleph Objects Inc., LulzBot Git Repository) 2018-11-20 00:22:33,467 - Recv: echo:Compiled: Sep 10 2018 2018-11-20 00:22:33,467 - Recv: echo: Free Memory: 3118 PlannerBufferBytes: 1264 2018-11-20 00:22:33,484 - Recv: echo:V55 stored settings retrieved (655 bytes; crc 64264) 2018-11-20 00:22:33,485 - Recv: echo: G21 ; (mm) 2018-11-20 00:22:33,486 - Recv: echo: M149 C ; Units in Celsius 2018-11-20 00:22:33,487 - Recv: 2018-11-20 00:22:33,487 - Recv: echo:Filament settings: Disabled 2018-11-20 00:22:33,488 - Recv: echo: M200 D3.00 2018-11-20 00:22:33,489 - Recv: echo: M200 D0 2018-11-20 00:22:33,489 - Recv: echo:Steps per unit: 2018-11-20 00:22:33,491 - Recv: echo: M92 X100.50 Y100.50 Z1600.00 E830.00 2018-11-20 00:22:33,492 - Recv: echo:Maximum feedrates (units/s): 2018-11-20 00:22:33,492 - Recv: echo: M203 X300.00 Y300.00 Z3.00 E25.00 2018-11-20 00:22:33,495 - Recv: echo:Maximum Acceleration (units/s2): 2018-11-20 00:22:33,496 - Recv: echo: M201 X9000 Y9000 Z100 E10000 2018-11-20 00:22:33,499 - Recv: echo:Acceleration (units/s2): P R T 2018-11-20 00:22:33,500 - Recv: echo: M204 P500.00 R3000.00 T500.00 2018-11-20 00:22:33,504 - Recv: echo:Advanced: B S T X Y Z E 2018-11-20 00:22:33,508 - Recv: echo: M205 B20000 S0.00 T0.00 X8.00 Y8.00 Z0.40 E10.00 2018-11-20 00:22:33,509 - Recv: echo:Home offset: 2018-11-20 00:22:33,509 - Recv: echo: M206 X0.00 Y0.00 Z0.00 2018-11-20 00:22:33,512 - Recv: echo:Auto Bed Leveling: 2018-11-20 00:22:33,513 - Recv: echo: M420 S0 2018-11-20 00:22:33,513 - Recv: echo:Material heatup parameters: 2018-11-20 00:22:33,514 - Recv: echo: M145 S0 H200 B70 F0 2018-11-20 00:22:33,516 - Recv: echo: M145 S1 H240 B110 F0 2018-11-20 00:22:33,517 - Recv: echo:PID settings: 2018-11-20 00:22:33,517 - Recv: echo: M301 P28.79 I1.91 D108.51 2018-11-20 00:22:33,517 - Recv: echo: M304 P162.00 I17.00 D378.00 2018-11-20 00:22:33,520 - Recv: echo:Z-Probe Offset (mm): 2018-11-20 00:22:33,521 - Recv: echo: M851 Z-1.20 2018-11-20 00:22:33,521 - Recv: echo:Filament load/unload lengths: 2018-11-20 00:22:33,523 - Recv: echo: M603 L40.00 U80.00 2018-11-20 00:22:39,100 - Recv: ok N0 P15 B4 2018-11-20 00:22:39,106 - Changing monitoring state from "Connecting" to "Operational" 2018-11-20 00:22:39,109 - Send: N0 M110 N0*125 2018-11-20 00:22:39,608 - Recv: echo:SD card ok 2018-11-20 00:22:39,632 - Recv: echo:Unknown command: "" 2018-11-20 00:22:39,632 - Recv: ok P15 B4 2018-11-20 00:22:39,633 - Send: N1 M115*39 2018-11-20 00:22:39,665 - Recv: FIRMWARE_NAME:Marlin FIRMWARE_VERSION:1.1.9.16 EXTRUDER_TYPE:SingleExtruder SOURCE_CODE_URL:https://code.alephobjects.com/diffusion/MARLIN PROTOCOL_VERSION:1.0 MACHINE_TYPE:LulzBot TAZ 6 EXTRUDER_COUNT:1 UUID:845f003c-aebd-4e53-a6b9-7d0984fde609 2018-11-20 00:22:39,667 - Recv: Cap:SERIAL_XON_XOFF:0 2018-11-20 00:22:39,669 - Recv: Cap:EEPROM:1 2018-11-20 00:22:39,670 - Recv: Cap:VOLUMETRIC:1 2018-11-20 00:22:39,670 - Recv: Cap:AUTOREPORT_TEMP:1 2018-11-20 00:22:39,672 - Recv: Cap:PROGRESS:0 2018-11-20 00:22:39,673 - Recv: Cap:PRINT_JOB:1 2018-11-20 00:22:39,673 - Recv: Cap:AUTOLEVEL:1 2018-11-20 00:22:39,674 - Recv: Cap:Z_PROBE:1 2018-11-20 00:22:39,674 - Recv: Cap:LEVELING_DATA:1 2018-11-20 00:22:39,675 - Recv: Cap:BUILD_PERCENT:1 2018-11-20 00:22:39,675 - Recv: Cap:SOFTWARE_POWER:0 2018-11-20 00:22:39,676 - Recv: Cap:TOGGLE_LIGHTS:0 2018-11-20 00:22:39,676 - Recv: Cap:CASE_LIGHT_BRIGHTNESS:0 2018-11-20 00:22:39,677 - Recv: Cap:EMERGENCY_PARSER:1 2018-11-20 00:22:39,677 - Recv: Cap:AUTOREPORT_SD_STATUS:0 2018-11-20 00:22:39,678 - Recv: Cap:THERMAL_PROTECTION:1 2018-11-20 00:22:39,678 - Recv: ok N1 P15 B4 2018-11-20 00:22:39,679 - Send: M21 2018-11-20 00:22:39,706 - Recv: echo:SD card ok 2018-11-20 00:22:39,706 - Recv: ok P15 B4 2018-11-20 00:22:39,707 - Send: M20 2018-11-20 00:22:39,722 - Recv: Begin file list 2018-11-20 00:22:39,861 - Recv: /DOCUME~1/MANUAL/SOURCE/MANUAL.GST 363 2018-11-20 00:22:40,906 - Recv: /PRODUC~1/LABELS/TAZ_60~1.GLA 624895 2018-11-20 00:22:40,910 - Recv: /PRODUC~1/LABELS/TAZ_60~2.GLA 624895 2018-11-20 00:22:40,912 - Recv: /PRODUC~1/LABELS/TAZ_60~3.GLA 624898 2018-11-20 00:22:40,912 - Recv: /PRODUC~1/LABELS/SERIAL~1.GLA 1741 2018-11-20 00:22:41,021 - Recv: /PRODUC~2/ELECTR~1/RAMBO/BOARD/ADAPTERS/RAMBOS~1/GERBERS/RAMBOS~1.GBL 30359 2018-11-20 00:22:41,025 - Recv: /PRODUC~2/ELECTR~1/RAMBO/BOARD/ADAPTERS/RAMBOS~1/GERBERS/RAMBOS~1.GBS 1166 2018-11-20 00:22:41,028 - Recv: /PRODUC~2/ELECTR~1/RAMBO/BOARD/ADAPTERS/RAMBOS~1/GERBERS/RAMBOS~1.GTL 30131 2018-11-20 00:22:41,029 - Recv: /PRODUC~2/ELECTR~1/RAMBO/BOARD/ADAPTERS/RAMBOS~1/GERBERS/RAMBOS~1.GTO 14810 2018-11-20 00:22:41,032 - Recv: /PRODUC~2/ELECTR~1/RAMBO/BOARD/ADAPTERS/RAMBOS~1/GERBERS/RAMBOS~1.GTS 1166 2018-11-20 00:22:41,340 - Recv: /PRODUC~2/JIGS/CONTRO~1/TAZ6_C~1.GCO 1008 2018-11-20 00:22:41,344 - Recv: /PRODUC~2/JIGS/CONTRO~1/TAZ6_C~2.GCO 1331 2018-11-20 00:22:41,345 - Recv: /PRODUC~2/JIGS/CONTRO~1/TAZ6_C~3.GCO 1389 2018-11-20 00:22:41,347 - Recv: /PRODUC~2/JIGS/CONTRO~1/TAZ6_C~4.GCO 3335 2018-11-20 00:22:42,384 - Recv: /P��>��>RODUC~2/JIGS/CONTRO~1/MARLIN/ARDUIN~1/ARDUIN~1.X/HARDWARE/TOOLS/AVR/SHARE/DOC/BINUTI~1/CHANGE~1.GZ 2174 2018-11-20 00:22:42,392 - Recv: /PRODUC~2/JIGS/CONTRO~1/MARLIN/ARDUIN~1/ARDUIN~1.X/HARDWARE/TOOLS/AVR/SHARE/DOC/GCC-AVR/CHANGE~1.GZ 2717 2018-11-20 00:22:43,159 - Recv: /PRODUC~2/JIGS/DOUBLE~1.GCO 3581252 2018-11-20 00:22:43,207 - Recv: /PRODUC~2/JIGS/XY_PAR~1.GCO 2219443 2018-11-20 00:22:43,388 - Recv: /PRODUC~2/PRINTE~1/12MM_D~1/MINI/AS-PR0~1.GCO 4557302 2018-11-20 00:22:43,401 - Recv: /PRODUC~2/PRINTE~1/12MM_S~1/MINI/AS-PR0~1.GCO 2896313 2018-11-20 00:22:43,433 - Recv: /PRODUC~2/PRINTE~1/BEARIN~1/TAZ6/AS-PR0~1.GCO 4687322 2018-11-20 00:22:43,441 - Recv: /PRODUC~2/PRINTE~1/BEARIN~1/MINI/AS-PR0~1.GCO 4379075 2018-11-20 00:22:43,458 - Recv: /PRODUC~2/PRINTE~1/BED_CO~1/MINI/PP-GP0~1.GCO 3534881 2018-11-20 00:22:43,478 - Recv: /PRODUC~2/PRINTE~1/BED_MO~1/MINI/PP-GP0~1.GCO 4969528 2018-11-20 00:22:43,495 - Recv: /PRODUC~2/PRINTE~1/BED_MO~2/MINI/PP-GP0~1.GCO 2845959 2018-11-20 00:22:43,503 - Recv: /PRODUC~2/PRINTE~1/BED_MO~2/TAZ6/PP-GP0~1.GCO 2036277 2018-11-20 00:22:43,519 - Recv: /PRODUC~2/PRINTE~1/ELECTR~1/MINI/PP-GP0~1.GCO 2108589 2018-11-20 00:22:43,540 - Recv: /PRODUC~2/PRINTE~1/EXTRUD~1/MINI/PP-GP0~1.GCO 3520225 2018-11-20 00:22:43,547 - Recv: /PRODUC~2/PRINTE~1/EXTRUD~1/TAZ6/PP-GP0~1.GCO 3515172 2018-11-20 00:22:43,573 - Recv: /PRODUC~2/PRINTE~1/EXTRUD~2/MINI/PP-GP0~1.GCO 3654123 2018-11-20 00:22:43,593 - Recv: /PRODUC~2/PRINTE~1/EXTRUD~3/MINI/PP-GP0~1.GCO 5921108 2018-11-20 00:22:43,613 - Recv: /PRODUC~2/PRINTE~1/EXTRUD~4/MINI/PP-GP0~1.GCO 2494674 2018-11-20 00:22:43,626 - Recv: /PRODUC~2/PRINTE~1/EXTRUD~5/JONASK~1.GCO 1379039 2018-11-20 00:22:43,638 - Recv: /PRODUC~2/PRINTE~1/EXTRUD~5/MINI/PP-GP0~1.GCO 267184 2018-11-20 00:22:43,659 - Recv: /PRODUC~2/PRINTE~1/FAN_DU~1/MINI/PP-GP0~1.GCO 746203 2018-11-20 00:22:43,683 - Recv: /PRODUC~2/PRINTE~1/FAN_DU~2/MINI/PP-GP0~1.GCO 748087 2018-11-20 00:22:43,707 - Recv: /PRODUC~2/PRINTE~1/FEED_T~1/MINI/PP-GP0~1.GCO 3999457 2018-11-20 00:22:43,728 - Recv: /PRODUC~2/PRINTE~1/FLEXY_~1/MINI/PP-GP0~1.GCO 4606621 2018-11-20 00:22:43,753 - Recv: /PRODUC~2/PRINTE~1/FLEXY_~2/MINI/PP-GP0~1.GCO 1435493 2018-11-20 00:22:43,773 - Recv: /PRODUC~2/PRINTE~1/HEATSI~1/MINI/PP-PG0~1.GCO 5554044 2018-11-20 00:22:43,798 - Recv: /PRODUC~2/PRINTE~1/HERRIN~1/TAZ6/PP-GP0~1.GCO 3121651 2018-11-20 00:22:43,810 - Recv: /PRODUC~2/PRINTE~1/HERRIN~1/MINI/PP-GP0~1.GCO 3075191 2018-11-20 00:22:43,811 - Recv: /PRODUC~2/PRINTE~1/HERRIN~1/MINI/PP-GP0~2.GCO 3075191 2018-11-20 00:22:43,862 - Recv: /PRODUC~2/PRINTE~1/HERRIN~2/MINI/PP-GP0~1.GCO 4984140 2018-11-20 00:22:43,908 - Recv: /PRODUC~2/PRINTE~1/INTERC~1/TAZ5/PP-GP0~1.GCO 1699992 2018-11-20 00:22:43,912 - Recv: /PRODUC~2/PRINTE~1/INTERC~1/TAZ6/INTERC~1.GCO 1700433 2018-11-20 00:22:43,916 - Recv: /PRODUC~2/PRINTE~1/INTERC~1/TAZ6/PP-GP0~1.GCO 1700433 2018-11-20 00:22:43,945 - Recv: /PRODUC~2/PRINTE~1/LCD_BE~1/TAZ5/PP-GP0~1.GCO 1694030 2018-11-20 00:22:43,958 - Recv: /PRODUC~2/PRINTE~1/LCD_BE~1/TAZ6/LCD_BE~1.GCO 1702774 2018-11-20 00:22:43,959 - Recv: /PRODUC~2/PRINTE~1/LCD_BE~1/TAZ6/PP-GP0~1.GCO 1702774 2018-11-20 00:22:43,990 - Recv: /PRODUC~2/PRINTE~1/LCD_KNOB/MINI/PP-GP0~1.GCO 2476541 2018-11-20 00:22:44,015 - Recv: /PRODUC~2/PRINTE~1/LCD_SP~1/MINI/PP-GP0~1.GCO 6636259 2018-11-20 00:22:44,027 - Recv: /PRODUC~2/PRINTE~1/LCD_SP~1/TAZ6/LCD_SP~1.GCO 3491336 2018-11-20 00:22:44,052 - Recv: /PRODUC~2/PRINTE~1/SD_CAR~1/MINI/PP-GP0~1.GCO 1223989 2018-11-20 00:23:16,833 - Communication timeout while idle, trying to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves. 2018-11-20 00:23:16,834 - Send: M155 S2 2018-11-20 00:23:22,200 - Recv: start 2018-11-20 00:23:22,202 - Printer sent 'start' while already operational. External reset? Resetting line numbers to be on the safe side 2018-11-20 00:23:22,210 - Recv: echo:Marlin 1.1.9 2018-11-20 00:23:22,211 - Recv: 2018-11-20 00:23:22,212 - Recv: echo: Last Updated: Sep 10 201815:47:32 | Author: (Aleph Objects Inc., LulzBot Git Repository) 2018-11-20 00:23:22,213 - Send: N0 M110 N0*125 2018-11-20 00:23:22,213 - Recv: echo:Compiled: Sep 10 2018 2018-11-20 00:23:22,214 - Recv: echo: Free Memory: 3118 PlannerBufferBytes: 1264 2018-11-20 00:23:22,223 - Recv: echo:V55 stored settings retrieved (655 bytes; crc 64264) 2018-11-20 00:23:22,227 - Recv: echo: G21 ; (mm) 2018-11-20 00:23:22,228 - Recv: echo: M149 C ; Units in Celsius 2018-11-20 00:23:22,228 - Recv: 2018-11-20 00:23:22,229 - Recv: echo:Filament settings: Disabled 2018-11-20 00:23:22,229 - Recv: echo: M200 D3.00 2018-11-20 00:23:22,230 - Recv: echo: M200 D0 2018-11-20 00:23:22,232 - Recv: echo:Steps per unit: 2018-11-20 00:23:22,232 - Recv: echo: M92 X100.50 Y100.50 Z1600.00 E830.00 2018-11-20 00:23:22,236 - Recv: echo:Maximum feedrates (units/s): 2018-11-20 00:23:22,236 - Recv: echo: M203 X300.00 Y300.00 Z3.00 E25.00 2018-11-20 00:23:22,236 - Recv: echo:Maximum Acceleration (units/s2): 2018-11-20 00:23:22,240 - Recv: echo: M201 X9000 Y9000 Z100 E10000 2018-11-20 00:23:22,240 - Recv: echo:Acceleration (units/s2): P R T 2018-11-20 00:23:22,244 - Recv: echo: M204 P500.00 R3000.00 T500.00 2018-11-20 00:23:22,249 - Recv: echo:Advanced: B S T X Y Z E 2018-11-20 00:23:22,252 - Recv: echo: M205 B20000 S0.00 T0.00 X8.00 Y8.00 Z0.40 E10.00 2018-11-20 00:23:22,253 - Recv: echo:Home offset: 2018-11-20 00:23:22,253 - Recv: echo: M206 X0.00 Y0.00 Z0.00 2018-11-20 00:23:22,254 - Recv: echo:Auto Bed Leveling: 2018-11-20 00:23:22,254 - Recv: echo: M420 S0 2018-11-20 00:23:22,256 - Recv: echo:Material heatup parameters: 2018-11-20 00:23:22,256 - Recv: echo: M145 S0 H200 B70 F0 2018-11-20 00:23:22,257 - Recv: echo: M145 S1 H240 B110 F0 2018-11-20 00:23:22,260 - Recv: echo:PID settings: 2018-11-20 00:23:22,260 - Recv: echo: M301 P28.79 I1.91 D108.51 2018-11-20 00:23:22,261 - Recv: echo: M304 P162.00 I17.00 D378.00 2018-11-20 00:23:22,261 - Recv: echo:Z-Probe Offset (mm): 2018-11-20 00:23:22,264 - Recv: echo: M851 Z-1.20 2018-11-20 00:23:22,265 - Recv: echo:Filament load/unload lengths: 2018-11-20 00:23:22,265 - Recv: echo: M603 L40.00 U80.00 2018-11-20 00:23:27,846 - Recv: ok N0 P15 B4 2018-11-20 00:23:27,848 - Send: N0 M110 N0*125 2018-11-20 00:23:28,679 - Recv: echo:SD card ok 2018-11-20 00:23:28,703 - Recv: ok N0 P15 B4 2018-11-20 00:23:28,705 - Send: M155 S2 2018-11-20 00:23:28,723 - Recv: ok P15 B4 2018-11-20 00:23:30,727 - Recv: T:21.50 /0.00 B:21.90 /0.00 @:0 B@:0 2018-11-20 00:23:32,729 - Recv: T:21.53 /0.00 B:21.93 /0.00 @:0 B@:0 2018-11-20 00:23:34,728 - Recv: T:21.50 /0.00 B:21.86 /0.00 @:0 B@:0 2018-11-20 00:23:36,727 - Recv: T:21.50 /0.00 B:21.83 /0.00 @:0 B@:0 2018-11-20 00:23:38,727 - Recv: T:21.47 /0.00 B:21.86 /0.00 @:0 B@:0 2018-11-20 00:23:40,729 - Recv: T:21.53 /0.00 B:21.83 /0.00 @:0 B@:0 2018-11-20 00:23:42,729 - Recv: T:21.47 /0.00 B:21.90 /0.00 @:0 B@:0 2018-11-20 00:23:44,727 - Recv: T:21.47 /0.00 B:21.93 /0.00 @:0 B@:0 2018-11-20 00:23:46,730 - Recv: T:21.53 /0.00 B:21.86 /0.00 @:0 B@:0 2018-11-20 00:23:48,729 - Recv: T:21.50 /0.00 B:21.90 /0.00 @:0 B@:0 2018-11-20 00:23:50,728 - Recv: T:21.50 /0.00 B:21.86 /0.00 @:0 B@:0 2018-11-20 00:23:52,727 - Recv: T:21.53 /0.00 B:21.86 /0.00 @:0 B@:0 2018-11-20 00:23:54,730 - Recv: T:21.50 /0.00 B:21.86 /0.00 @:0 B@:0 2018-11-20 00:23:56,729 - Recv: T:21.53 /0.00 B:21.83 /0.00 @:0 B@:0 2018-11-20 00:23:58,728 - Recv: T:21.50 /0.00 B:21.90 /0.00 @:0 B@:0 2018-11-20 00:24:00,732 - Recv: T:21.56 /0.00 B:21.86 /0.00 @:0 B@:0 2018-11-20 00:24:02,730 - Recv: T:21.50 /0.00 B:21.86 /0.00 @:0 B@:0 2018-11-20 00:24:04,728 - Recv: T:21.50 /0.00 B:21.90 /0.00 @:0 B@:0 2018-11-20 00:24:06,729 - Recv: T:21.50 /0.00 B:21.97 /0.00 @:0 B@:0 2018-11-20 00:24:08,731 - Recv: T:21.50 /0.00 B:21.93 /0.00 @:0 B@:0 2018-11-20 00:24:10,730 - Recv: T:21.50 /0.00 B:21.93 /0.00 @:0 B@:0 2018-11-20 00:24:12,729 - Recv: T:21.50 /0.00 B:21.93 /0.00 @:0 B@:0 2018-11-20 00:24:14,728 - Recv: T:21.50 /0.00 B:21.90 /0.00 @:0 B@:0 2018-11-20 00:24:16,730 - Recv: T:21.53 /0.00 B:21.86 /0.00 @:0 B@:0 2018-11-20 00:24:18,730 - Recv: T:21.53 /0.00 B:21.97 /0.00 @:0 B@:0 2018-11-20 00:24:20,729 - Recv: T:21.56 /0.00 B:21.93 /0.00 @:0 B@:0 2018-11-20 00:24:22,744 - Recv: T:21.53 /0.00 B:21.79 /0.00 @:0 B@:0