2019-03-05 05:20:14,127 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2019-03-05 05:20:14,131 - octoprint.server - INFO - --- Log roll over detected ---------------------------------------------------
2019-03-05 05:20:14,132 - octoprint.server - INFO - OctoPrint 1.3.10
2019-03-05 05:20:14,136 - octoprint.plugin.core - INFO - 16 plugin(s) registered with the system:
|  Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/action_command_prompt
|  Announcement Plugin (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/announcements
|  Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/tracking
|  Application Keys Plugin (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/appkeys
|  Backup & Restore (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/backup
|  Core Wizard (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/corewizard
|  CuraEngine (<= 15.04) (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/cura
|  Discovery (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/discovery
|  Force Login (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/forcelogin
|  GPX (2.6.3) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_GPX
|  Logging (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/logging
|  Pi Support Plugin (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/pi_support
|  Plugin Manager (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/pluginmanager
|  Printer Safety Check (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/printer_safety_check
|  Software Update (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/softwareupdate
|  Virtual Printer (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/virtual_printer
2019-03-05 05:20:14,162 - octoprint.environment - INFO - Detected environment is Python 2.7.13 under Linux (linux2). Details:
|  hardware:
|    cores: 4
|    freq: 1200.0
|    ram: 918192128
|  os:
|    id: linux
|    platform: linux2
|  plugins:
|    pi_support:
|      model: Raspberry Pi 3 Model B Rev 1.2
|      octopi_version: 0.15.1
|  python:
|    pip: 9.0.3
|    version: 2.7.13
|    virtualenv: /home/pi/oprint
2019-03-05 05:20:14,163 - octoprint.server - INFO - ------------------------------------------------------------------------------
2019-03-05 05:20:25,314 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {}
2019-03-05 05:35:14,129 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2019-03-05 05:35:25,411 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {}
2019-03-05 05:50:14,131 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2019-03-05 05:50:25,333 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {}
2019-03-05 06:05:14,133 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2019-03-05 06:05:25,327 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {}
2019-03-05 06:20:14,136 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2019-03-05 06:20:25,323 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {}
2019-03-05 06:35:14,139 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2019-03-05 06:35:25,335 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {}
2019-03-05 06:50:14,141 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2019-03-05 06:50:25,350 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {}
2019-03-05 07:05:14,143 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2019-03-05 07:05:25,350 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {}
2019-03-05 07:20:14,146 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2019-03-05 07:20:25,426 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {}
2019-03-05 07:35:14,149 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2019-03-05 07:35:25,345 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {}
2019-03-05 07:50:14,152 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2019-03-05 07:50:25,374 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {}
2019-03-05 08:05:14,155 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2019-03-05 08:05:25,362 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {}
2019-03-05 08:20:14,157 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2019-03-05 08:20:25,399 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {}
2019-03-05 08:35:14,159 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2019-03-05 08:35:25,379 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {}
2019-03-05 08:50:14,161 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2019-03-05 08:50:25,391 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {}
2019-03-05 09:05:14,164 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2019-03-05 09:05:25,400 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {}
2019-03-05 09:20:14,168 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2019-03-05 09:20:25,402 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {}
2019-03-05 09:35:14,171 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2019-03-05 09:35:25,421 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {}
2019-03-05 09:50:14,174 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2019-03-05 09:50:25,416 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {}
2019-03-05 10:05:14,177 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2019-03-05 10:05:25,429 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {}
2019-03-05 10:20:14,180 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2019-03-05 10:20:25,422 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {}
2019-03-05 10:35:14,181 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2019-03-05 10:35:25,550 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {}
2019-03-05 10:50:14,184 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2019-03-05 10:50:25,460 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {}
2019-03-05 11:05:14,185 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2019-03-05 11:05:25,491 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {}
2019-03-05 11:20:14,188 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2019-03-05 11:20:25,463 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {}
2019-03-05 11:35:14,191 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2019-03-05 11:35:26,494 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {}
2019-03-05 11:50:14,193 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2019-03-05 11:50:25,448 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {}
2019-03-05 12:05:14,197 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2019-03-05 12:05:25,477 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {}
2019-03-05 12:20:14,199 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2019-03-05 12:20:25,476 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {}
2019-03-05 12:35:14,200 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2019-03-05 12:35:25,492 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {}
2019-03-05 12:50:14,206 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2019-03-05 12:50:25,510 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {}
2019-03-05 13:05:14,208 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2019-03-05 13:05:25,513 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {}
2019-03-05 13:20:14,212 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2019-03-05 13:20:25,502 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {}
2019-03-05 13:35:14,215 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2019-03-05 13:35:25,518 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {}
2019-03-05 13:50:14,218 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2019-03-05 13:50:25,521 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {}
2019-03-05 14:05:14,221 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2019-03-05 14:05:25,527 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {}
2019-03-05 14:20:14,224 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2019-03-05 14:20:25,610 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {}
2019-03-05 14:35:14,226 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2019-03-05 14:35:25,643 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {}
2019-03-05 14:50:14,229 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2019-03-05 14:50:25,545 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {}
2019-03-05 15:05:14,232 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2019-03-05 15:05:25,536 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {}
2019-03-05 15:20:14,236 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2019-03-05 15:20:25,560 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {}
2019-03-05 15:35:14,239 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2019-03-05 15:35:25,559 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {}
2019-03-05 15:50:14,242 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2019-03-05 15:50:25,610 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {}
2019-03-05 16:05:14,245 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2019-03-05 16:05:25,568 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {}
2019-03-05 16:20:14,248 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2019-03-05 16:20:26,980 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {}
2019-03-05 16:35:14,251 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2019-03-05 16:35:25,596 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {}
2019-03-05 16:42:26,306 - octoprint.server.util.flask - INFO - Passively logging in user Hiro_print from 192.168.1.64
2019-03-05 16:42:28,910 - octoprint.server.util.sockjs - INFO - New connection from client: 192.168.1.64
2019-03-05 16:42:29,039 - octoprint.server.util.flask - INFO - Passively logging in user Hiro_print from 192.168.1.64
2019-03-05 16:42:30,494 - octoprint.plugins.announcements - INFO - Loaded channel _important from https://octoprint.org/feeds/important.xml in 0.37s
2019-03-05 16:42:31,466 - octoprint.plugins.announcements - INFO - Loaded channel _releases from https://octoprint.org/feeds/releases.xml in 0.37s
2019-03-05 16:42:32,000 - octoprint.plugins.announcements - INFO - Loaded channel _blog from https://octoprint.org/feeds/octoblog.xml in 0.37s
2019-03-05 16:42:32,480 - octoprint.plugins.announcements - INFO - Loaded channel _plugins from https://plugins.octoprint.org/feed.xml in 0.32s
2019-03-05 16:42:33,007 - octoprint.plugins.announcements - INFO - Loaded channel _octopi from https://octoprint.org/feeds/octopi.xml in 0.3s
2019-03-05 16:42:34,700 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk
2019-03-05 16:42:34,787 - octoprint.server.util.sockjs - INFO - User Hiro_print logged in on the socket from client 192.168.1.64
2019-03-05 16:42:37,101 - octoprint.plugins.GPX - INFO - Connecting through x3g.
2019-03-05 16:42:37,103 - octoprint.plugins.GPX - INFO - GPXPrinter created, port: /dev/Rep2x, baudrate: 115200
2019-03-05 16:42:41,129 - octoprint.plugins.GPX - INFO - gpx.connect succeeded
2019-03-05 16:42:41,130 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Opening serial port"
2019-03-05 16:42:41,138 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial port" to "Detecting baudrate"
2019-03-05 16:42:42,159 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2019-03-05 16:42:42,191 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting baudrate" to "Operational"
2019-03-05 16:42:42,212 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2019-03-05 16:46:42,826 - octoprint.util.comm - INFO - Printer reports firmware name "Makerbot"
2019-03-05 16:46:43,200 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {u'printer_baudrate': 0, u'printer_port': u'/dev/Rep2x', 'firmware_name': 'Makerbot'}
2019-03-05 16:50:14,253 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2019-03-05 16:50:25,600 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {}
2019-03-05 17:03:28,457 - octoprint.util.comm - ERROR - Unexpected error while writing to serial port
Traceback (most recent call last):
  File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/util/comm.py", line 3228, in _do_send_without_checksum
    result = self._serial.write(to_send)
  File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_GPX/gpxprinter.py", line 131, in write
    self._append(gpx.write("%s" % data))
IOError: [Errno 5] Input/output error
2019-03-05 17:03:28,496 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Offline (Error: IOError: '[Errno 5] Input/output error' @ comm.py:_do_send_without_checksum:3228)"
2019-03-05 17:05:14,256 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2019-03-05 17:05:25,594 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {}
2019-03-05 17:20:14,258 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2019-03-05 17:20:25,624 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {}
2019-03-05 17:26:34,221 - octoprint.plugins.GPX - INFO - Connecting through x3g.
2019-03-05 17:26:34,221 - octoprint.plugins.GPX - INFO - GPXPrinter created, port: /dev/Rep2x, baudrate: 115200
2019-03-05 17:26:38,253 - octoprint.plugins.GPX - INFO - gpx.connect succeeded
2019-03-05 17:26:38,255 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Opening serial port"
2019-03-05 17:26:38,261 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial port" to "Detecting baudrate"
2019-03-05 17:26:39,298 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2019-03-05 17:26:39,322 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting baudrate" to "Operational"
2019-03-05 17:26:39,343 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2019-03-05 17:26:41,398 - octoprint.util.comm - INFO - Printer reports firmware name "Makerbot"
2019-03-05 17:26:41,910 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {u'printer_baudrate': 0, u'printer_port': u'/dev/Rep2x', 'firmware_name': 'Makerbot'}
2019-03-05 17:31:44,515 - octoprint.filemanager.analysis - INFO - Starting analysis of local:KUZOV.gcode
2019-03-05 17:31:44,522 - octoprint.filemanager.analysis - INFO - Invoking analysis command: /home/pi/oprint/bin/python2 -m octoprint analysis gcode --speed-x=6000 --speed-y=6000 --max-t=10 --throttle=0.0 --throttle-lines=100 /home/pi/.octoprint2/uploads/KUZOV.gcode
2019-03-05 17:31:46,798 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Printing"
2019-03-05 17:31:46,835 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2019-03-05 17:31:46,992 - octoprint.util.comm - INFO - Externally triggered heatup detected
2019-03-05 17:31:47,182 - octoprint.plugins.tracking - INFO - Sent tracking event print_started, payload: {'origin': 'local', 'throttled_now': False, 'throttled_mask': 327680, 'file': 'b6b434bc1a5dc8d652713e0c2bfeba256e05a870', 'throttled_past': True}
2019-03-05 17:31:51,063 - octoprint.util.comm - INFO - Externally triggered heatup detected
2019-03-05 17:32:03,176 - octoprint.util.comm - ERROR - Unexpected error while reading from serial port
Traceback (most recent call last):
  File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/util/comm.py", line 2605, in _readline
    ret = self._serial.readline()
  File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_GPX/gpxprinter.py", line 176, in readline
    self._append(gpx.readnext())
IOError: [Errno 5] Input/output error
2019-03-05 17:32:03,201 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Offline (Error: IOError: '[Errno 5] Input/output error' @ comm.py:_readline:2605)"
2019-03-05 17:32:03,210 - octoprint.filemanager.analysis - INFO - Starting analysis of local:KUZOV.gcode
2019-03-05 17:32:03,220 - octoprint.filemanager.analysis - INFO - Invoking analysis command: /home/pi/oprint/bin/python2 -m octoprint analysis gcode --speed-x=6000 --speed-y=6000 --max-t=10 --throttle=0.0 --throttle-lines=100 /home/pi/.octoprint2/uploads/KUZOV.gcode
2019-03-05 17:32:03,688 - octoprint.plugins.tracking - INFO - Sent tracking event print_failed, payload: {'origin': 'local', 'throttled_mask': 327680, 'elapsed': 16, 'reason': 'error', 'file': 'b6b434bc1a5dc8d652713e0c2bfeba256e05a870', 'throttled_now': False, 'throttled_past': True}
2019-03-05 17:32:21,115 - octoprint.plugins.GPX - INFO - Connecting through x3g.
2019-03-05 17:32:21,116 - octoprint.plugins.GPX - INFO - GPXPrinter created, port: /dev/Rep2x, baudrate: 115200
2019-03-05 17:32:25,155 - octoprint.plugins.GPX - INFO - gpx.connect succeeded
2019-03-05 17:32:25,156 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Opening serial port"
2019-03-05 17:32:25,162 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial port" to "Detecting baudrate"
2019-03-05 17:32:26,182 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2019-03-05 17:32:26,204 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting baudrate" to "Operational"
2019-03-05 17:32:26,216 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2019-03-05 17:32:28,269 - octoprint.util.comm - INFO - Printer reports firmware name "Makerbot"
2019-03-05 17:32:28,662 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {u'printer_baudrate': 0, u'printer_port': u'/dev/Rep2x', 'firmware_name': 'Makerbot'}
2019-03-05 17:32:28,872 - octoprint.util.comm - INFO - Externally triggered heatup detected
2019-03-05 17:32:33,220 - octoprint.util.comm - INFO - Externally triggered heatup detected
2019-03-05 17:33:11,670 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Offline"
2019-03-05 17:33:14,355 - octoprint.plugins.GPX - INFO - Connecting through x3g.
2019-03-05 17:33:14,358 - octoprint.plugins.GPX - INFO - GPXPrinter created, port: /dev/Rep2x, baudrate: 115200
2019-03-05 17:33:18,396 - octoprint.plugins.GPX - INFO - gpx.connect succeeded
2019-03-05 17:33:18,398 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Opening serial port"
2019-03-05 17:33:18,429 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial port" to "Detecting baudrate"
2019-03-05 17:33:19,481 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2019-03-05 17:33:19,507 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting baudrate" to "Operational"
2019-03-05 17:33:19,529 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2019-03-05 17:33:21,575 - octoprint.util.comm - INFO - Printer reports firmware name "Makerbot"
2019-03-05 17:33:21,882 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {u'printer_baudrate': 0, u'printer_port': u'/dev/Rep2x', 'firmware_name': 'Makerbot'}
2019-03-05 17:33:23,480 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Printing"
2019-03-05 17:33:23,514 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2019-03-05 17:33:23,581 - octoprint.util.comm - INFO - Externally triggered heatup detected
2019-03-05 17:33:23,862 - octoprint.plugins.tracking - INFO - Sent tracking event print_started, payload: {'origin': 'local', 'throttled_now': False, 'throttled_mask': 327680, 'file': 'b6b434bc1a5dc8d652713e0c2bfeba256e05a870', 'throttled_past': True}
2019-03-05 17:33:25,629 - octoprint.util.comm - INFO - Externally triggered heatup detected
2019-03-05 17:33:27,702 - octoprint.util.comm - INFO - Externally triggered heatup detected
2019-03-05 17:33:31,769 - octoprint.util.comm - INFO - Externally triggered heatup detected
2019-03-05 17:35:14,261 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2019-03-05 17:35:25,703 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {}
2019-03-05 17:36:01,568 - octoprint.util.comm - INFO - Externally triggered heatup detected
2019-03-05 17:38:05,209 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Cancelling"
2019-03-05 17:38:05,213 - octoprint.filemanager.analysis - INFO - Starting analysis of local:KUZOV.gcode
2019-03-05 17:38:05,223 - octoprint.filemanager.analysis - INFO - Invoking analysis command: /home/pi/oprint/bin/python2 -m octoprint analysis gcode --speed-x=6000 --speed-y=6000 --max-t=10 --throttle=0.0 --throttle-lines=100 /home/pi/.octoprint2/uploads/KUZOV.gcode
2019-03-05 17:38:05,288 - octoprint.plugins.GPX - WARNING - Cancelling build by OctoPrint
2019-03-05 17:38:06,338 - octoprint.plugin - ERROR - Error while calling plugin GPX
Traceback (most recent call last):
  File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/plugin/__init__.py", line 230, in call_plugin
    result = getattr(plugin, method)(*args, **kwargs)
  File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_GPX/__init__.py", line 178, in on_event
    self.printer.cancel()
  File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_GPX/gpxprinter.py", line 192, in cancel
    self._append(gpx.abort())
Timeout: Timeout
2019-03-05 17:38:06,701 - octoprint.plugins.tracking - INFO - Sent tracking event print_cancelled, payload: {'origin': 'local', 'throttled_now': False, 'throttled_mask': 327680, 'file': 'b6b434bc1a5dc8d652713e0c2bfeba256e05a870', 'throttled_past': True}
2019-03-05 17:38:08,077 - octoprint.plugins.tracking - INFO - Sent tracking event print_failed, payload: {'origin': 'local', 'throttled_mask': 327680, 'elapsed': 281, 'reason': 'cancelled', 'file': 'b6b434bc1a5dc8d652713e0c2bfeba256e05a870', 'throttled_now': False, 'throttled_past': True}
2019-03-05 17:38:09,095 - octoprint.util.comm - INFO - Externally triggered heatup detected
2019-03-05 17:38:11,145 - octoprint.util.comm - INFO - Changing monitoring state from "Cancelling" to "Operational"
2019-03-05 17:39:54,943 - octoprint.filemanager.analysis - INFO - Analysis of entry local:KUZOV.gcode finished, needed 109.73s
2019-03-05 17:40:40,787 - octoprint.plugins.GPX - INFO - option, value: has_heated_build_platform, None
2019-03-05 17:40:40,789 - octoprint.plugins.GPX - INFO - option, value: max_feedrate, None
2019-03-05 17:40:40,792 - octoprint.plugins.GPX - INFO - option, value: motor_steps, None
2019-03-05 17:40:40,793 - octoprint.plugins.GPX - INFO - option, value: steps_per_mm, None
2019-03-05 17:40:40,796 - octoprint.plugins.GPX - INFO - option, value: has_heated_build_platform, None
2019-03-05 17:40:40,798 - octoprint.plugins.GPX - INFO - option, value: max_feedrate, None
2019-03-05 17:40:40,799 - octoprint.plugins.GPX - INFO - option, value: motor_steps, None
2019-03-05 17:40:40,800 - octoprint.plugins.GPX - INFO - option, value: steps_per_mm, None
2019-03-05 17:40:40,803 - octoprint.plugins.GPX - INFO - option, value: active_temperature, None
2019-03-05 17:40:40,807 - octoprint.plugins.GPX - INFO - option, value: actual_filament_diameter, None
2019-03-05 17:40:40,809 - octoprint.plugins.GPX - INFO - option, value: build_platform_temperature, None
2019-03-05 17:40:40,812 - octoprint.plugins.GPX - INFO - option, value: packing_density, None
2019-03-05 17:40:40,814 - octoprint.plugins.GPX - INFO - option, value: standby_temperature, None
2019-03-05 17:40:40,817 - octoprint.plugins.GPX - INFO - option, value: extruder_count, None
2019-03-05 17:40:40,819 - octoprint.plugins.GPX - INFO - option, value: nozzle_diameter, None
2019-03-05 17:40:40,822 - octoprint.plugins.GPX - INFO - option, value: timeout, None
2019-03-05 17:40:40,824 - octoprint.plugins.GPX - INFO - option, value: build_platform_temperature, None
2019-03-05 17:40:40,827 - octoprint.plugins.GPX - INFO - option, value: build_progress, u'1'
2019-03-05 17:40:40,829 - octoprint.plugins.GPX - INFO - option, value: ditto_printing, u'0'
2019-03-05 17:40:40,831 - octoprint.plugins.GPX - INFO - option, value: gcode_flavor, u'reprap'
2019-03-05 17:40:40,833 - octoprint.plugins.GPX - INFO - option, value: machine_type, u'r2'
2019-03-05 17:40:40,836 - octoprint.plugins.GPX - INFO - option, value: packing_density, None
2019-03-05 17:40:40,838 - octoprint.plugins.GPX - INFO - option, value: recalculate_5d, u'0'
2019-03-05 17:40:40,840 - octoprint.plugins.GPX - INFO - option, value: sd_card_path, None
2019-03-05 17:40:40,843 - octoprint.plugins.GPX - INFO - option, value: slicer_filament_diameter, None
2019-03-05 17:40:40,846 - octoprint.plugins.GPX - INFO - option, value: active_temperature, None
2019-03-05 17:40:40,848 - octoprint.plugins.GPX - INFO - option, value: actual_filament_diameter, None
2019-03-05 17:40:40,849 - octoprint.plugins.GPX - INFO - option, value: build_platform_temperature, None
2019-03-05 17:40:40,850 - octoprint.plugins.GPX - INFO - option, value: packing_density, None
2019-03-05 17:40:40,853 - octoprint.plugins.GPX - INFO - option, value: standby_temperature, None
2019-03-05 17:40:40,855 - octoprint.plugins.GPX - INFO - option, value: endstop, None
2019-03-05 17:40:40,856 - octoprint.plugins.GPX - INFO - option, value: home_feedrate, None
2019-03-05 17:40:40,861 - octoprint.plugins.GPX - INFO - option, value: max_feedrate, None
2019-03-05 17:40:40,863 - octoprint.plugins.GPX - INFO - option, value: steps_per_mm, None
2019-03-05 17:40:40,864 - octoprint.plugins.GPX - INFO - option, value: endstop, None
2019-03-05 17:40:40,866 - octoprint.plugins.GPX - INFO - option, value: home_feedrate, None
2019-03-05 17:40:40,869 - octoprint.plugins.GPX - INFO - option, value: max_feedrate, None
2019-03-05 17:40:40,873 - octoprint.plugins.GPX - INFO - option, value: steps_per_mm, None
2019-03-05 17:40:40,875 - octoprint.plugins.GPX - INFO - option, value: endstop, None
2019-03-05 17:40:40,877 - octoprint.plugins.GPX - INFO - option, value: home_feedrate, None
2019-03-05 17:40:40,878 - octoprint.plugins.GPX - INFO - option, value: max_feedrate, None
2019-03-05 17:40:40,882 - octoprint.plugins.GPX - INFO - option, value: steps_per_mm, None
2019-03-05 17:40:40,887 - octoprint.plugins.GPX - INFO - Open /home/pi/.octoprint2/data/GPX/gpx.ini
2019-03-05 17:40:40,888 - octoprint.plugins.GPX - INFO - Write /home/pi/.octoprint2/data/GPX/gpx.ini
2019-03-05 17:41:29,836 - octoprint.plugins.GPX - INFO - option, value: has_heated_build_platform, u'None'
2019-03-05 17:41:29,839 - octoprint.plugins.GPX - INFO - option, value: max_feedrate, u'None'
2019-03-05 17:41:29,841 - octoprint.plugins.GPX - INFO - option, value: motor_steps, u'None'
2019-03-05 17:41:29,844 - octoprint.plugins.GPX - INFO - option, value: steps_per_mm, u'None'
2019-03-05 17:41:29,846 - octoprint.plugins.GPX - INFO - option, value: has_heated_build_platform, u'None'
2019-03-05 17:41:29,852 - octoprint.plugins.GPX - INFO - option, value: max_feedrate, u'None'
2019-03-05 17:41:29,854 - octoprint.plugins.GPX - INFO - option, value: motor_steps, u'None'
2019-03-05 17:41:29,856 - octoprint.plugins.GPX - INFO - option, value: steps_per_mm, u'None'
2019-03-05 17:41:29,858 - octoprint.plugins.GPX - INFO - option, value: active_temperature, u'None'
2019-03-05 17:41:29,861 - octoprint.plugins.GPX - INFO - option, value: actual_filament_diameter, u'None'
2019-03-05 17:41:29,864 - octoprint.plugins.GPX - INFO - option, value: build_platform_temperature, u'None'
2019-03-05 17:41:29,865 - octoprint.plugins.GPX - INFO - option, value: packing_density, u'None'
2019-03-05 17:41:29,869 - octoprint.plugins.GPX - INFO - option, value: standby_temperature, u'None'
2019-03-05 17:41:29,870 - octoprint.plugins.GPX - INFO - option, value: extruder_count, u'None'
2019-03-05 17:41:29,873 - octoprint.plugins.GPX - INFO - option, value: nozzle_diameter, u'None'
2019-03-05 17:41:29,875 - octoprint.plugins.GPX - INFO - option, value: timeout, u'None'
2019-03-05 17:41:29,877 - octoprint.plugins.GPX - INFO - option, value: build_platform_temperature, u'None'
2019-03-05 17:41:29,878 - octoprint.plugins.GPX - INFO - option, value: build_progress, u'1'
2019-03-05 17:41:29,879 - octoprint.plugins.GPX - INFO - option, value: ditto_printing, u'0'
2019-03-05 17:41:29,880 - octoprint.plugins.GPX - INFO - option, value: gcode_flavor, u'reprap'
2019-03-05 17:41:29,886 - octoprint.plugins.GPX - INFO - option, value: machine_type, u'r2'
2019-03-05 17:41:29,889 - octoprint.plugins.GPX - INFO - option, value: packing_density, u'None'
2019-03-05 17:41:29,890 - octoprint.plugins.GPX - INFO - option, value: recalculate_5d, u'0'
2019-03-05 17:41:29,892 - octoprint.plugins.GPX - INFO - option, value: sd_card_path, u'None'
2019-03-05 17:41:29,896 - octoprint.plugins.GPX - INFO - option, value: slicer_filament_diameter, u'None'
2019-03-05 17:41:29,898 - octoprint.plugins.GPX - INFO - option, value: active_temperature, u'None'
2019-03-05 17:41:29,899 - octoprint.plugins.GPX - INFO - option, value: actual_filament_diameter, u'None'
2019-03-05 17:41:29,901 - octoprint.plugins.GPX - INFO - option, value: build_platform_temperature, u'None'
2019-03-05 17:41:29,905 - octoprint.plugins.GPX - INFO - option, value: packing_density, u'None'
2019-03-05 17:41:29,907 - octoprint.plugins.GPX - INFO - option, value: standby_temperature, u'None'
2019-03-05 17:41:29,911 - octoprint.plugins.GPX - INFO - option, value: endstop, u'None'
2019-03-05 17:41:29,912 - octoprint.plugins.GPX - INFO - option, value: home_feedrate, u'None'
2019-03-05 17:41:29,913 - octoprint.plugins.GPX - INFO - option, value: max_feedrate, u'None'
2019-03-05 17:41:29,914 - octoprint.plugins.GPX - INFO - option, value: steps_per_mm, u'None'
2019-03-05 17:41:29,915 - octoprint.plugins.GPX - INFO - option, value: endstop, u'None'
2019-03-05 17:41:29,919 - octoprint.plugins.GPX - INFO - option, value: home_feedrate, u'None'
2019-03-05 17:41:29,923 - octoprint.plugins.GPX - INFO - option, value: max_feedrate, u'None'
2019-03-05 17:41:29,926 - octoprint.plugins.GPX - INFO - option, value: steps_per_mm, u'None'
2019-03-05 17:41:29,927 - octoprint.plugins.GPX - INFO - option, value: endstop, u'None'
2019-03-05 17:41:29,928 - octoprint.plugins.GPX - INFO - option, value: home_feedrate, u'None'
2019-03-05 17:41:29,929 - octoprint.plugins.GPX - INFO - option, value: max_feedrate, u'None'
2019-03-05 17:41:29,933 - octoprint.plugins.GPX - INFO - option, value: steps_per_mm, u'None'
2019-03-05 17:41:29,938 - octoprint.plugins.GPX - INFO - Open /home/pi/.octoprint2/data/GPX/gpx.ini
2019-03-05 17:41:29,941 - octoprint.plugins.GPX - INFO - Write /home/pi/.octoprint2/data/GPX/gpx.ini
2019-03-05 17:42:05,520 - octoprint.util.comm - INFO - Externally triggered heatup detected
2019-03-05 17:42:27,917 - octoprint.plugins.GPX - INFO - option, value: has_heated_build_platform, u'None'
2019-03-05 17:42:27,918 - octoprint.plugins.GPX - INFO - option, value: max_feedrate, u'None'
2019-03-05 17:42:27,921 - octoprint.plugins.GPX - INFO - option, value: motor_steps, u'None'
2019-03-05 17:42:27,923 - octoprint.plugins.GPX - INFO - option, value: steps_per_mm, u'None'
2019-03-05 17:42:27,925 - octoprint.plugins.GPX - INFO - option, value: has_heated_build_platform, u'None'
2019-03-05 17:42:27,927 - octoprint.plugins.GPX - INFO - option, value: max_feedrate, u'None'
2019-03-05 17:42:27,928 - octoprint.plugins.GPX - INFO - option, value: motor_steps, u'None'
2019-03-05 17:42:27,929 - octoprint.plugins.GPX - INFO - option, value: steps_per_mm, u'None'
2019-03-05 17:42:27,929 - octoprint.plugins.GPX - INFO - option, value: active_temperature, u'None'
2019-03-05 17:42:27,931 - octoprint.plugins.GPX - INFO - option, value: actual_filament_diameter, u'None'
2019-03-05 17:42:27,935 - octoprint.plugins.GPX - INFO - option, value: build_platform_temperature, u'None'
2019-03-05 17:42:27,941 - octoprint.plugins.GPX - INFO - option, value: packing_density, u'None'
2019-03-05 17:42:27,944 - octoprint.plugins.GPX - INFO - option, value: standby_temperature, u'None'
2019-03-05 17:42:27,946 - octoprint.plugins.GPX - INFO - option, value: extruder_count, u'None'
2019-03-05 17:42:27,948 - octoprint.plugins.GPX - INFO - option, value: nozzle_diameter, u'None'
2019-03-05 17:42:27,949 - octoprint.plugins.GPX - INFO - option, value: timeout, u'None'
2019-03-05 17:42:27,951 - octoprint.plugins.GPX - INFO - option, value: build_platform_temperature, u'None'
2019-03-05 17:42:27,954 - octoprint.plugins.GPX - INFO - option, value: build_progress, u'1'
2019-03-05 17:42:27,956 - octoprint.plugins.GPX - INFO - option, value: ditto_printing, u'0'
2019-03-05 17:42:27,959 - octoprint.plugins.GPX - INFO - option, value: gcode_flavor, u'reprap'
2019-03-05 17:42:27,961 - octoprint.plugins.GPX - INFO - option, value: machine_type, u'r2'
2019-03-05 17:42:27,963 - octoprint.plugins.GPX - INFO - option, value: packing_density, u'None'
2019-03-05 17:42:27,966 - octoprint.plugins.GPX - INFO - option, value: recalculate_5d, u'0'
2019-03-05 17:42:27,967 - octoprint.plugins.GPX - INFO - option, value: sd_card_path, u'None'
2019-03-05 17:42:27,970 - octoprint.plugins.GPX - INFO - option, value: slicer_filament_diameter, u'None'
2019-03-05 17:42:27,973 - octoprint.plugins.GPX - INFO - option, value: active_temperature, u'None'
2019-03-05 17:42:27,975 - octoprint.plugins.GPX - INFO - option, value: actual_filament_diameter, u'None'
2019-03-05 17:42:27,976 - octoprint.plugins.GPX - INFO - option, value: build_platform_temperature, u'None'
2019-03-05 17:42:27,977 - octoprint.plugins.GPX - INFO - option, value: packing_density, u'None'
2019-03-05 17:42:27,981 - octoprint.plugins.GPX - INFO - option, value: standby_temperature, u'None'
2019-03-05 17:42:27,983 - octoprint.plugins.GPX - INFO - option, value: endstop, u'None'
2019-03-05 17:42:27,985 - octoprint.plugins.GPX - INFO - option, value: home_feedrate, u'None'
2019-03-05 17:42:27,988 - octoprint.plugins.GPX - INFO - option, value: max_feedrate, u'None'
2019-03-05 17:42:27,990 - octoprint.plugins.GPX - INFO - option, value: steps_per_mm, u'None'
2019-03-05 17:42:28,016 - octoprint.plugins.GPX - INFO - option, value: endstop, u'None'
2019-03-05 17:42:28,022 - octoprint.plugins.GPX - INFO - option, value: home_feedrate, u'None'
2019-03-05 17:42:28,026 - octoprint.plugins.GPX - INFO - option, value: max_feedrate, u'None'
2019-03-05 17:42:28,029 - octoprint.plugins.GPX - INFO - option, value: steps_per_mm, u'None'
2019-03-05 17:42:28,030 - octoprint.plugins.GPX - INFO - option, value: endstop, u'None'
2019-03-05 17:42:28,031 - octoprint.plugins.GPX - INFO - option, value: home_feedrate, u'None'
2019-03-05 17:42:28,032 - octoprint.plugins.GPX - INFO - option, value: max_feedrate, u'None'
2019-03-05 17:42:28,033 - octoprint.plugins.GPX - INFO - option, value: steps_per_mm, u'None'
2019-03-05 17:42:28,038 - octoprint.plugins.GPX - INFO - Open /home/pi/.octoprint2/data/GPX/gpx.ini
2019-03-05 17:42:28,041 - octoprint.plugins.GPX - INFO - Write /home/pi/.octoprint2/data/GPX/gpx.ini
2019-03-05 17:43:01,749 - octoprint.server.util.sockjs - INFO - Client connection closed: 192.168.1.64
2019-03-05 17:44:01,522 - octoprint.server.util.sockjs - INFO - New connection from client: 192.168.1.64
2019-03-05 17:44:01,638 - octoprint.server.util.flask - INFO - Passively logging in user Hiro_print from 192.168.1.64
2019-03-05 17:44:05,028 - octoprint.server.util.sockjs - INFO - User Hiro_print logged in on the socket from client 192.168.1.64
2019-03-05 17:45:04,255 - octoprint.plugins.GPX - INFO - option, value: has_heated_build_platform, None
2019-03-05 17:45:04,257 - octoprint.plugins.GPX - INFO - option, value: max_feedrate, None
2019-03-05 17:45:04,260 - octoprint.plugins.GPX - INFO - option, value: motor_steps, None
2019-03-05 17:45:04,262 - octoprint.plugins.GPX - INFO - option, value: steps_per_mm, None
2019-03-05 17:45:04,265 - octoprint.plugins.GPX - INFO - option, value: has_heated_build_platform, None
2019-03-05 17:45:04,267 - octoprint.plugins.GPX - INFO - option, value: max_feedrate, None
2019-03-05 17:45:04,270 - octoprint.plugins.GPX - INFO - option, value: motor_steps, None
2019-03-05 17:45:04,272 - octoprint.plugins.GPX - INFO - option, value: steps_per_mm, None
2019-03-05 17:45:04,274 - octoprint.plugins.GPX - INFO - option, value: active_temperature, None
2019-03-05 17:45:04,276 - octoprint.plugins.GPX - INFO - option, value: actual_filament_diameter, None
2019-03-05 17:45:04,279 - octoprint.plugins.GPX - INFO - option, value: build_platform_temperature, None
2019-03-05 17:45:04,282 - octoprint.plugins.GPX - INFO - option, value: packing_density, None
2019-03-05 17:45:04,284 - octoprint.plugins.GPX - INFO - option, value: standby_temperature, None
2019-03-05 17:45:04,287 - octoprint.plugins.GPX - INFO - option, value: extruder_count, None
2019-03-05 17:45:04,289 - octoprint.plugins.GPX - INFO - option, value: nozzle_diameter, None
2019-03-05 17:45:04,292 - octoprint.plugins.GPX - INFO - option, value: timeout, None
2019-03-05 17:45:04,294 - octoprint.plugins.GPX - INFO - option, value: build_platform_temperature, None
2019-03-05 17:45:04,297 - octoprint.plugins.GPX - INFO - option, value: build_progress, u'1'
2019-03-05 17:45:04,299 - octoprint.plugins.GPX - INFO - option, value: ditto_printing, u'0'
2019-03-05 17:45:04,302 - octoprint.plugins.GPX - INFO - option, value: gcode_flavor, u'makerbot'
2019-03-05 17:45:04,304 - octoprint.plugins.GPX - INFO - option, value: machine_type, u'r2'
2019-03-05 17:45:04,306 - octoprint.plugins.GPX - INFO - option, value: packing_density, None
2019-03-05 17:45:04,309 - octoprint.plugins.GPX - INFO - option, value: recalculate_5d, u'0'
2019-03-05 17:45:04,311 - octoprint.plugins.GPX - INFO - option, value: sd_card_path, None
2019-03-05 17:45:04,313 - octoprint.plugins.GPX - INFO - option, value: slicer_filament_diameter, None
2019-03-05 17:45:04,315 - octoprint.plugins.GPX - INFO - option, value: active_temperature, None
2019-03-05 17:45:04,318 - octoprint.plugins.GPX - INFO - option, value: actual_filament_diameter, None
2019-03-05 17:45:04,320 - octoprint.plugins.GPX - INFO - option, value: build_platform_temperature, None
2019-03-05 17:45:04,323 - octoprint.plugins.GPX - INFO - option, value: packing_density, None
2019-03-05 17:45:04,325 - octoprint.plugins.GPX - INFO - option, value: standby_temperature, None
2019-03-05 17:45:04,327 - octoprint.plugins.GPX - INFO - option, value: endstop, None
2019-03-05 17:45:04,328 - octoprint.plugins.GPX - INFO - option, value: home_feedrate, None
2019-03-05 17:45:04,331 - octoprint.plugins.GPX - INFO - option, value: max_feedrate, None
2019-03-05 17:45:04,335 - octoprint.plugins.GPX - INFO - option, value: steps_per_mm, None
2019-03-05 17:45:04,337 - octoprint.plugins.GPX - INFO - option, value: endstop, None
2019-03-05 17:45:04,338 - octoprint.plugins.GPX - INFO - option, value: home_feedrate, None
2019-03-05 17:45:04,339 - octoprint.plugins.GPX - INFO - option, value: max_feedrate, None
2019-03-05 17:45:04,340 - octoprint.plugins.GPX - INFO - option, value: steps_per_mm, None
2019-03-05 17:45:04,343 - octoprint.plugins.GPX - INFO - option, value: endstop, None
2019-03-05 17:45:04,347 - octoprint.plugins.GPX - INFO - option, value: home_feedrate, None
2019-03-05 17:45:04,349 - octoprint.plugins.GPX - INFO - option, value: max_feedrate, None
2019-03-05 17:45:04,350 - octoprint.plugins.GPX - INFO - option, value: steps_per_mm, None
2019-03-05 17:45:04,359 - octoprint.plugins.GPX - INFO - Open /home/pi/.octoprint2/data/GPX/gpx.ini
2019-03-05 17:45:04,360 - octoprint.plugins.GPX - INFO - Write /home/pi/.octoprint2/data/GPX/gpx.ini
2019-03-05 17:45:27,213 - octoprint.util.comm - ERROR - Unexpected error while writing to serial port
Traceback (most recent call last):
  File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/util/comm.py", line 3228, in _do_send_without_checksum
    result = self._serial.write(to_send)
  File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_GPX/gpxprinter.py", line 131, in write
    self._append(gpx.write("%s" % data))
IOError: [Errno 5] Input/output error
2019-03-05 17:45:27,223 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Offline (Error: IOError: '[Errno 5] Input/output error' @ comm.py:_do_send_without_checksum:3228)"
2019-03-05 17:45:36,112 - octoprint.plugins.GPX - INFO - Connecting through x3g.
2019-03-05 17:45:36,113 - octoprint.plugins.GPX - INFO - GPXPrinter created, port: /dev/Rep2x, baudrate: 115200
2019-03-05 17:45:40,139 - octoprint.plugins.GPX - INFO - gpx.connect succeeded
2019-03-05 17:45:40,142 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Opening serial port"
2019-03-05 17:45:40,156 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial port" to "Detecting baudrate"
2019-03-05 17:45:41,185 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2019-03-05 17:45:41,208 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting baudrate" to "Operational"
2019-03-05 17:45:41,239 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2019-03-05 17:45:43,279 - octoprint.util.comm - INFO - Printer reports firmware name "Makerbot"
2019-03-05 17:45:43,766 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {u'printer_baudrate': 0, u'printer_port': u'/dev/Rep2x', 'firmware_name': 'Makerbot'}
2019-03-05 17:46:33,199 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Offline"
2019-03-05 17:46:35,561 - octoprint.plugins.GPX - INFO - Connecting through x3g.
2019-03-05 17:46:35,562 - octoprint.plugins.GPX - INFO - GPXPrinter created, port: /dev/Rep2x, baudrate: 115200
2019-03-05 17:46:39,583 - octoprint.plugins.GPX - INFO - gpx.connect succeeded
2019-03-05 17:46:39,584 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Opening serial port"
2019-03-05 17:46:39,601 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial port" to "Detecting baudrate"
2019-03-05 17:46:40,635 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2019-03-05 17:46:40,654 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting baudrate" to "Operational"
2019-03-05 17:46:40,671 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2019-03-05 17:46:42,728 - octoprint.util.comm - INFO - Printer reports firmware name "Makerbot"
2019-03-05 17:46:43,076 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {u'printer_baudrate': 0, u'printer_port': u'/dev/Rep2x', 'firmware_name': 'Makerbot'}
2019-03-05 17:46:52,537 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Offline"
2019-03-05 17:46:57,013 - octoprint.plugins.GPX - INFO - Connecting through x3g.
2019-03-05 17:46:57,016 - octoprint.plugins.GPX - INFO - GPXPrinter created, port: /dev/Rep2x, baudrate: 115200
2019-03-05 17:47:01,043 - octoprint.plugins.GPX - INFO - gpx.connect succeeded
2019-03-05 17:47:01,044 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Opening serial port"
2019-03-05 17:47:01,060 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial port" to "Detecting baudrate"
2019-03-05 17:47:02,087 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2019-03-05 17:47:02,114 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting baudrate" to "Operational"
2019-03-05 17:47:02,133 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2019-03-05 17:47:04,196 - octoprint.util.comm - INFO - Printer reports firmware name "Makerbot"
2019-03-05 17:47:04,550 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {u'printer_baudrate': 0, u'printer_port': u'/dev/Rep2x', 'firmware_name': 'Makerbot'}
2019-03-05 17:48:18,103 - octoprint.plugins.GPX - INFO - option, value: has_heated_build_platform, u'None'
2019-03-05 17:48:18,104 - octoprint.plugins.GPX - INFO - option, value: max_feedrate, u'None'
2019-03-05 17:48:18,105 - octoprint.plugins.GPX - INFO - option, value: motor_steps, u'None'
2019-03-05 17:48:18,106 - octoprint.plugins.GPX - INFO - option, value: steps_per_mm, u'None'
2019-03-05 17:48:18,108 - octoprint.plugins.GPX - INFO - option, value: has_heated_build_platform, u'None'
2019-03-05 17:48:18,109 - octoprint.plugins.GPX - INFO - option, value: max_feedrate, u'None'
2019-03-05 17:48:18,110 - octoprint.plugins.GPX - INFO - option, value: motor_steps, u'None'
2019-03-05 17:48:18,111 - octoprint.plugins.GPX - INFO - option, value: steps_per_mm, u'None'
2019-03-05 17:48:18,112 - octoprint.plugins.GPX - INFO - option, value: active_temperature, u'None'
2019-03-05 17:48:18,114 - octoprint.plugins.GPX - INFO - option, value: actual_filament_diameter, u'None'
2019-03-05 17:48:18,115 - octoprint.plugins.GPX - INFO - option, value: build_platform_temperature, u'None'
2019-03-05 17:48:18,116 - octoprint.plugins.GPX - INFO - option, value: packing_density, u'None'
2019-03-05 17:48:18,117 - octoprint.plugins.GPX - INFO - option, value: standby_temperature, u'None'
2019-03-05 17:48:18,118 - octoprint.plugins.GPX - INFO - option, value: extruder_count, u'None'
2019-03-05 17:48:18,120 - octoprint.plugins.GPX - INFO - option, value: nozzle_diameter, u'None'
2019-03-05 17:48:18,121 - octoprint.plugins.GPX - INFO - option, value: timeout, u'None'
2019-03-05 17:48:18,122 - octoprint.plugins.GPX - INFO - option, value: build_platform_temperature, u'None'
2019-03-05 17:48:18,124 - octoprint.plugins.GPX - INFO - option, value: build_progress, u'1'
2019-03-05 17:48:18,125 - octoprint.plugins.GPX - INFO - option, value: ditto_printing, u'0'
2019-03-05 17:48:18,127 - octoprint.plugins.GPX - INFO - option, value: gcode_flavor, u'makerbot'
2019-03-05 17:48:18,128 - octoprint.plugins.GPX - INFO - option, value: machine_type, u'r2'
2019-03-05 17:48:18,129 - octoprint.plugins.GPX - INFO - option, value: packing_density, u'None'
2019-03-05 17:48:18,131 - octoprint.plugins.GPX - INFO - option, value: recalculate_5d, u'0'
2019-03-05 17:48:18,132 - octoprint.plugins.GPX - INFO - option, value: sd_card_path, u'None'
2019-03-05 17:48:18,133 - octoprint.plugins.GPX - INFO - option, value: slicer_filament_diameter, u'None'
2019-03-05 17:48:18,134 - octoprint.plugins.GPX - INFO - option, value: active_temperature, u'None'
2019-03-05 17:48:18,136 - octoprint.plugins.GPX - INFO - option, value: actual_filament_diameter, u'None'
2019-03-05 17:48:18,137 - octoprint.plugins.GPX - INFO - option, value: build_platform_temperature, u'None'
2019-03-05 17:48:18,138 - octoprint.plugins.GPX - INFO - option, value: packing_density, u'None'
2019-03-05 17:48:18,140 - octoprint.plugins.GPX - INFO - option, value: standby_temperature, u'None'
2019-03-05 17:48:18,141 - octoprint.plugins.GPX - INFO - option, value: endstop, u'None'
2019-03-05 17:48:18,142 - octoprint.plugins.GPX - INFO - option, value: home_feedrate, u'None'
2019-03-05 17:48:18,143 - octoprint.plugins.GPX - INFO - option, value: max_feedrate, u'None'
2019-03-05 17:48:18,144 - octoprint.plugins.GPX - INFO - option, value: steps_per_mm, u'None'
2019-03-05 17:48:18,146 - octoprint.plugins.GPX - INFO - option, value: endstop, u'None'
2019-03-05 17:48:18,147 - octoprint.plugins.GPX - INFO - option, value: home_feedrate, u'None'
2019-03-05 17:48:18,149 - octoprint.plugins.GPX - INFO - option, value: max_feedrate, u'None'
2019-03-05 17:48:18,150 - octoprint.plugins.GPX - INFO - option, value: steps_per_mm, u'None'
2019-03-05 17:48:18,151 - octoprint.plugins.GPX - INFO - option, value: endstop, u'None'
2019-03-05 17:48:18,152 - octoprint.plugins.GPX - INFO - option, value: home_feedrate, u'None'
2019-03-05 17:48:18,153 - octoprint.plugins.GPX - INFO - option, value: max_feedrate, u'None'
2019-03-05 17:48:18,155 - octoprint.plugins.GPX - INFO - option, value: steps_per_mm, u'None'
2019-03-05 17:48:18,156 - octoprint.plugins.GPX - INFO - Open /home/pi/.octoprint2/data/GPX/gpx.ini
2019-03-05 17:48:18,158 - octoprint.plugins.GPX - INFO - Write /home/pi/.octoprint2/data/GPX/gpx.ini
2019-03-05 17:48:20,879 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Printing"
2019-03-05 17:48:20,924 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2019-03-05 17:48:21,027 - octoprint.util.comm - INFO - Externally triggered heatup detected
2019-03-05 17:48:21,252 - octoprint.plugins.tracking - INFO - Sent tracking event print_started, payload: {'origin': 'local', 'throttled_now': False, 'throttled_mask': 327680, 'file': 'b6b434bc1a5dc8d652713e0c2bfeba256e05a870', 'throttled_past': True}
2019-03-05 17:48:23,071 - octoprint.util.comm - INFO - Externally triggered heatup detected
2019-03-05 17:48:35,272 - octoprint.util.comm - INFO - Externally triggered heatup detected
2019-03-05 17:48:39,343 - octoprint.util.comm - INFO - Externally triggered heatup detected
2019-03-05 17:48:41,467 - octoprint.util.comm - INFO - Externally triggered heatup detected
2019-03-05 17:50:14,264 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2019-03-05 17:50:25,635 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {}
2019-03-05 17:51:32,102 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Cancelling"
2019-03-05 17:51:32,128 - octoprint.plugins.GPX - WARNING - Cancelling build by OctoPrint
2019-03-05 17:51:33,179 - octoprint.plugin - ERROR - Error while calling plugin GPX
Traceback (most recent call last):
  File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/plugin/__init__.py", line 230, in call_plugin
    result = getattr(plugin, method)(*args, **kwargs)
  File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_GPX/__init__.py", line 178, in on_event
    self.printer.cancel()
  File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_GPX/gpxprinter.py", line 192, in cancel
    self._append(gpx.abort())
Timeout: Timeout
2019-03-05 17:51:34,690 - octoprint.plugins.tracking - INFO - Sent tracking event print_cancelled, payload: {'origin': 'local', 'throttled_now': False, 'throttled_mask': 327680, 'file': 'b6b434bc1a5dc8d652713e0c2bfeba256e05a870', 'throttled_past': True}
2019-03-05 17:51:35,036 - octoprint.plugins.tracking - INFO - Sent tracking event print_failed, payload: {'origin': 'local', 'throttled_mask': 327680, 'elapsed': 191, 'reason': 'cancelled', 'file': 'b6b434bc1a5dc8d652713e0c2bfeba256e05a870', 'throttled_now': False, 'throttled_past': True}
2019-03-05 17:51:35,698 - octoprint.util.comm - INFO - Externally triggered heatup detected
2019-03-05 17:51:37,769 - octoprint.util.comm - INFO - Changing monitoring state from "Cancelling" to "Operational"
2019-03-05 18:05:14,267 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2019-03-05 18:05:25,691 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {}
2019-03-05 18:14:32,963 - octoprint.util.comm - INFO - Externally triggered heatup detected
2019-03-05 18:20:14,270 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2019-03-05 18:20:25,618 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {}
2019-03-05 18:21:07,009 - octoprint.util.comm - INFO - Externally triggered heatup detected
2019-03-05 18:25:01,381 - octoprint.util.comm - INFO - Externally triggered heatup detected
2019-03-05 18:35:05,336 - octoprint.util.comm - INFO - Externally triggered heatup detected
2019-03-05 18:35:14,273 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2019-03-05 18:35:25,656 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {}
2019-03-05 18:38:34,704 - octoprint.util.comm - INFO - Externally triggered heatup detected
2019-03-05 18:50:14,275 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2019-03-05 18:50:25,630 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {}
2019-03-05 18:55:43,149 - octoprint.util.comm - INFO - Externally triggered heatup detected
2019-03-05 19:00:36,339 - octoprint.util.comm - INFO - Externally triggered heatup detected
2019-03-05 19:00:43,411 - octoprint.util.comm - ERROR - Unexpected error while reading from serial port
Traceback (most recent call last):
  File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/util/comm.py", line 2605, in _readline
    ret = self._serial.readline()
  File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_GPX/gpxprinter.py", line 176, in readline
    self._append(gpx.readnext())
Timeout: Timeout
2019-03-05 19:00:43,429 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Offline (Error: Timeout: 'Timeout' @ comm.py:_readline:2605)"
2019-03-05 19:05:14,278 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2019-03-05 19:05:25,916 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {}
2019-03-05 19:20:14,280 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2019-03-05 19:20:25,682 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {}
2019-03-05 19:35:14,283 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2019-03-05 19:35:25,668 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {}
2019-03-05 19:50:14,286 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2019-03-05 19:50:25,789 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {}
2019-03-05 20:05:14,289 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2019-03-05 20:05:25,714 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {}