### Windows users: To edit this file use Notepad++, VSCode, Atom or SublimeText. ### Do not use Notepad or WordPad. ### MacOSX users: If you use Textedit to edit this file make sure to use ### "plain text format" and "disable smart quotes" in "Textedit > Preferences" ### Configure which camera to use # # Available options are: # - auto: tries first usb webcam, if that's not available tries raspi cam # - usb: only tries usb webcam # - raspi: only tries raspi cam # # Defaults to auto # #camera="auto" ### Additional options to supply to MJPG Streamer for the USB camera # # See https://faq.octoprint.org/mjpg-streamer-config for available options # # Defaults to a resolution of 640x480 px and a framerate of 10 fps # camera_usb_options="-r 2304x1536 -f 10" ### Additional webcam devices known to cause problems with -f # # Apparently there a some devices out there that with the current # mjpg_streamer release do not support the -f parameter (for specifying # the capturing framerate) and will just refuse to output an image if it # is supplied. # # The webcam daemon will detect those devices by their USB Vendor and Product # ID and remove the -f parameter from the options provided to mjpg_streamer. # # By default, this is done for the following devices: # Logitech C170 (046d:082b) # GEMBIRD (1908:2310) # Genius F100 (0458:708c) # Cubeternet GL-UPC822 UVC WebCam (1e4e:0102) # # Using the following option it is possible to add additional devices. If # your webcam happens to show above symptoms, try determining your cam's # vendor and product id via lsusb, activating the line below by removing # and # adding it, e.g. for two broken cameras "aabb:ccdd" and "aabb:eeff" # # additional_brokenfps_usb_devices=("aabb:ccdd" "aabb:eeff") # # If this fixes your problem, please report it back so we can include the device # out of the box: https://github.com/guysoft/OctoPi/issues # #additional_brokenfps_usb_devices=() ### Additional options to supply to MJPG Streamer for the RasPi Cam # # See https://faq.octoprint.org/mjpg-streamer-config for available options # # Defaults to 10fps # #camera_raspi_options="-fps 10" ### Configuration of camera HTTP output # # Usually you should NOT need to change this at all! Only touch if you # know what you are doing and what the parameters mean. # # Below settings are used in the mjpg-streamer call like this: # # -o "output_http.so -w $camera_http_webroot $camera_http_options" # # Current working directory is the mjpg-streamer base directory. # camera_http_webroot="./www" camera_http_options=""