2020-02-29 08:48:08,631 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin FileLogger
2020-02-29 08:48:08,639 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin LegacyProfileReader
2020-02-29 08:48:08,646 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin AMFReader
2020-02-29 08:48:08,652 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin SimpleView
2020-02-29 08:48:08,659 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin SolidView
2020-02-29 08:48:08,669 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin FirmwareUpdateChecker
2020-02-29 08:48:08,675 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin SentryLogger
2020-02-29 08:48:08,683 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin SupportEraser
2020-02-29 08:48:08,692 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin PrepareStage
2020-02-29 08:48:08,720 - WARNING - [MainThread] UM.PluginRegistry.loadPlugin [412]: Plugin [CuraInventorPlugin] with supported sdk versions [['5.0.0', '6.0.0', '6.1.0', '5.0.0']] is incompatible with the current sdk version [7.1.0].
2020-02-29 08:48:08,728 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin LinearAdvanceSettingPlugin
2020-02-29 08:48:08,735 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin VersionInTitlebarPlugin
2020-02-29 08:48:08,744 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin OrientationPlugin
2020-02-29 08:48:08,759 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin OctoPrintPlugin
2020-02-29 08:48:08,766 - DEBUG - [MainThread] SidebarGUIPlugin.__matchVersion [48]: This version of the plugin is not compatible with this version of Cura. Please check for an update.
2020-02-29 08:48:08,767 - WARNING - [MainThread] SidebarGUIPlugin.register [23]: Plugin not loaded because of a version mismatch
2020-02-29 08:48:08,772 - WARNING - [MainThread] UM.PluginRegistry.loadPlugin [419]: Plugin SidebarGUIPlugin did not return any objects to register
2020-02-29 08:48:08,783 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin MeshTools
2020-02-29 08:48:08,793 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin ZOffsetPlugin
2020-02-29 08:48:08,802 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin CustomSupports
2020-02-29 08:48:08,813 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin MaterialSettingsPlugin
2020-02-29 08:48:08,818 - DEBUG - [MainThread] UM.PluginRegistry.loadPlugins [369]: Loading all plugins took 1.0612249374389648 seconds
2020-02-29 08:48:08,832 - INFO - [MainThread] UM.VersionUpgradeManager.upgrade [148]: Looking for old configuration files to upgrade.
2020-02-29 08:48:08,904 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [313]: Create upgrade task for configuration file [./wanhao_i3plus_extruder_0+%235_settings.inst.cfg] with type [definition_changes] and source version [4000010]
2020-02-29 08:48:08,910 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [313]: Create upgrade task for configuration file [./wanhao_i3plus_extruder_0+%234_settings.inst.cfg] with type [definition_changes] and source version [4000010]
2020-02-29 08:48:08,916 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [313]: Create upgrade task for configuration file [./wanhao_i3plus_extruder_0+%232_settings.inst.cfg] with type [definition_changes] and source version [4000010]
2020-02-29 08:48:08,922 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [313]: Create upgrade task for configuration file [./GreenLeader_settings.inst.cfg] with type [definition_changes] and source version [4000010]
2020-02-29 08:48:08,928 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [313]: Create upgrade task for configuration file [./RedLeader_settings.inst.cfg] with type [definition_changes] and source version [4000010]
2020-02-29 08:48:08,933 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [313]: Create upgrade task for configuration file [./wanhao_i3plus_extruder_0+%233_settings.inst.cfg] with type [definition_changes] and source version [4000010]
2020-02-29 08:48:08,938 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [313]: Create upgrade task for configuration file [./Wanhao+Duplicator+i3+Plus+%232_settings.inst.cfg] with type [definition_changes] and source version [4000010]
2020-02-29 08:48:08,944 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [313]: Create upgrade task for configuration file [./wanhao_i3plus_extruder_0+%236_settings.inst.cfg] with type [definition_changes] and source version [4000010]
2020-02-29 08:48:08,949 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [313]: Create upgrade task for configuration file [./Monoprice+Select+Mini+V2+%28E3D%29_settings.inst.cfg] with type [definition_changes] and source version [4000010]
2020-02-29 08:48:08,954 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [313]: Create upgrade task for configuration file [./monoprice_select_mini_v2_extruder_0+%232_settings.inst.cfg] with type [definition_changes] and source version [4000010]
2020-02-29 08:48:08,960 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [313]: Create upgrade task for configuration file [./Wanhao+Duplicator+i3+Plus_settings.inst.cfg] with type [definition_changes] and source version [4000010]
2020-02-29 08:48:08,965 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [313]: Create upgrade task for configuration file [./GreyLeader_settings.inst.cfg] with type [definition_changes] and source version [4000010]
2020-02-29 08:48:09,008 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [313]: Create upgrade task for configuration file [./wanhao_i3plus_extruder_0+%236.extruder.cfg] with type [extruder_train] and source version [4000010]
2020-02-29 08:48:09,014 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [313]: Create upgrade task for configuration file [./monoprice_select_mini_v2_extruder_0+%232.extruder.cfg] with type [extruder_train] and source version [4000010]
2020-02-29 08:48:09,018 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [313]: Create upgrade task for configuration file [./wanhao_i3plus_extruder_0+%232.extruder.cfg] with type [extruder_train] and source version [4000010]
2020-02-29 08:48:09,024 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [313]: Create upgrade task for configuration file [./wanhao_i3plus_extruder_0+%235.extruder.cfg] with type [extruder_train] and source version [4000010]
2020-02-29 08:48:09,030 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [313]: Create upgrade task for configuration file [./wanhao_i3plus_extruder_0+%234.extruder.cfg] with type [extruder_train] and source version [4000010]
2020-02-29 08:48:09,036 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [313]: Create upgrade task for configuration file [./wanhao_i3plus_extruder_0+%233.extruder.cfg] with type [extruder_train] and source version [4000010]
2020-02-29 08:48:09,072 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [313]: Create upgrade task for configuration file [./RedLeader.global.cfg] with type [machine_stack] and source version [4000010]
2020-02-29 08:48:09,075 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [313]: Create upgrade task for configuration file [./Wanhao+Duplicator+i3+Plus+%232.global.cfg] with type [machine_stack] and source version [4000010]
2020-02-29 08:48:09,077 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [313]: Create upgrade task for configuration file [./GreenLeader.global.cfg] with type [machine_stack] and source version [4000010]
2020-02-29 08:48:09,081 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [313]: Create upgrade task for configuration file [./GreyLeader.global.cfg] with type [machine_stack] and source version [4000010]
2020-02-29 08:48:09,084 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [313]: Create upgrade task for configuration file [./Monoprice+Select+Mini+V2+%28E3D%29.global.cfg] with type [machine_stack] and source version [4000010]
2020-02-29 08:48:09,086 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [313]: Create upgrade task for configuration file [./Wanhao+Duplicator+i3+Plus.global.cfg] with type [machine_stack] and source version [4000010]
2020-02-29 08:48:09,089 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-02-29 08:48:09,093 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-02-29 08:48:09,096 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-02-29 08:48:09,099 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-02-29 08:48:09,103 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-02-29 08:48:09,106 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-02-29 08:48:09,109 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-02-29 08:48:09,112 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-02-29 08:48:09,116 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-02-29 08:48:09,120 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-02-29 08:48:09,123 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-02-29 08:48:09,126 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-02-29 08:48:09,130 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-02-29 08:48:09,132 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [313]: Create upgrade task for configuration file [./cura.cfg] with type [preferences] and source version [6000010]
2020-02-29 08:48:09,189 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [313]: Create upgrade task for configuration file [./wanhao_i3plus_bluldr_pla%2B_%28esun%29%5Bltblu%5D_010119.inst.cfg] with type [quality_changes] and source version [4000010]
2020-02-29 08:48:09,191 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [313]: Create upgrade task for configuration file [./wanhao_i3plus_orangeleader_pteg_%28esun%29.inst.cfg] with type [quality_changes] and source version [4000010]
2020-02-29 08:48:09,195 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [313]: Create upgrade task for configuration file [./wanhao_i3plus_rdldr_pla%2B_%28esun%29%5Bltblu%5D_010319.inst.cfg] with type [quality_changes] and source version [4000010]
2020-02-29 08:48:09,197 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [313]: Create upgrade task for configuration file [./wanhao_i3plus_extruder_0_%233_gryldr_pla_%28hatchbox%29_%5Bgrey%5D_011420.inst.cfg] with type [quality_changes] and source version [4000010]
2020-02-29 08:48:09,200 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [313]: Create upgrade task for configuration file [./wanhao_i3plus_extruder_0_%235_bluldr_pteg_%28esun%29_%5Bclear%5D_020920.inst.cfg] with type [quality_changes] and source version [4000010]
2020-02-29 08:48:09,202 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [313]: Create upgrade task for configuration file [./wanhao_i3plus_extruder_0_greyleader_pteg_%28esun%29.inst.cfg] with type [quality_changes] and source version [4000010]
2020-02-29 08:48:09,205 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [313]: Create upgrade task for configuration file [./wanhao_i3plus_greyleader_pteg_%28esun%29.inst.cfg] with type [quality_changes] and source version [4000010]
2020-02-29 08:48:09,208 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [313]: Create upgrade task for configuration file [./wanhao_i3plus_extruder_0_%232_orangeleader_pla%2B_%28esun%29%5Bltblu%5D_121219.inst.cfg] with type [quality_changes] and source version [4000010]
2020-02-29 08:48:09,211 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [313]: Create upgrade task for configuration file [./wanhao_i3plus_extruder_0_%235_bluldr_pla_%28hatchbox%29_%5Bred%5D_010320.inst.cfg] with type [quality_changes] and source version [4000010]
2020-02-29 08:48:09,213 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [313]: Create upgrade task for configuration file [./wanhao_i3plus_extruder_0_%233_gryldr_pla%2B_%28esun%29%5Bltblu%5D_122119.inst.cfg] with type [quality_changes] and source version [4000010]
2020-02-29 08:48:09,217 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [313]: Create upgrade task for configuration file [./wanhao_i3plus_extruder_0_%232_orldr_pla%2B_%28sunlu%29%5Bgreen%5D_010420.inst.cfg] with type [quality_changes] and source version [4000010]
2020-02-29 08:48:09,219 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [313]: Create upgrade task for configuration file [./wanhao_i3plus_bluldr_pla%2B_%28esun%29%5Bblack%5D_010520.inst.cfg] with type [quality_changes] and source version [4000010]
2020-02-29 08:48:09,221 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [313]: Create upgrade task for configuration file [./wanhao_i3plus_orangeleader_pla%2B_%28esun%29%5Bltblu%5D_121219.inst.cfg] with type [quality_changes] and source version [4000010]
2020-02-29 08:48:09,224 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [313]: Create upgrade task for configuration file [./wanhao_i3plus_gryldr_pla%2B_%28esun%29%5Bltblu%5D_122119.inst.cfg] with type [quality_changes] and source version [4000010]
2020-02-29 08:48:09,227 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [313]: Create upgrade task for configuration file [./wanhao_i3plus_bluldr_pteg_%28esun%29_%5Bclear%5D_020920.inst.cfg] with type [quality_changes] and source version [4000010]
2020-02-29 08:48:09,230 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [313]: Create upgrade task for configuration file [./wanhao_i3plus_bluldr_pla_%28hatchbox%29_%5Bred%5D_010320.inst.cfg] with type [quality_changes] and source version [4000010]
2020-02-29 08:48:09,232 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [313]: Create upgrade task for configuration file [./wanhao_i3plus_orldr_pla%2B_%28sunlu%29%5Bgreen%5D_010420.inst.cfg] with type [quality_changes] and source version [4000010]
2020-02-29 08:48:09,234 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [313]: Create upgrade task for configuration file [./wanhao_i3plus_extruder_0_%235_orangeleader_pteg_%28esun%29.inst.cfg] with type [quality_changes] and source version [4000010]
2020-02-29 08:48:09,237 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [313]: Create upgrade task for configuration file [./wanhao_i3plus_extruder_0_%236_rdldr_pla%2B_%28esun%29%5Bltblu%5D_010319.inst.cfg] with type [quality_changes] and source version [4000010]
2020-02-29 08:48:09,239 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [313]: Create upgrade task for configuration file [./wanhao_i3plus_extruder_0_%235_bluldr_pla%2B_%28esun%29%5Bblack%5D_010520.inst.cfg] with type [quality_changes] and source version [4000010]
2020-02-29 08:48:09,242 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [313]: Create upgrade task for configuration file [./wanhao_i3plus_gryldr_pla_%28hatchbox%29_%5Bgrey%5D_011420.inst.cfg] with type [quality_changes] and source version [4000010]
2020-02-29 08:48:09,244 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [313]: Create upgrade task for configuration file [./wanhao_i3plus_extruder_0_%235_bluldr_pla%2B_%28esun%29%5Bltblu%5D_010119.inst.cfg] with type [quality_changes] and source version [4000010]
2020-02-29 08:48:09,262 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ../3D4MakersFacilanC8/3d4makers_facilan_c8.xml.fdm_material, skip it
2020-02-29 08:48:09,290 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [313]: Create upgrade task for configuration file [./wanhao_i3plus_extruder_0+%233_user.inst.cfg] with type [user] and source version [4000010]
2020-02-29 08:48:09,293 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [313]: Create upgrade task for configuration file [./Monoprice+Select+Mini+V2+%28E3D%29_user.inst.cfg] with type [user] and source version [4000010]
2020-02-29 08:48:09,295 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [313]: Create upgrade task for configuration file [./GreyLeader_user.inst.cfg] with type [user] and source version [4000010]
2020-02-29 08:48:09,297 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [313]: Create upgrade task for configuration file [./GreenLeader_user.inst.cfg] with type [user] and source version [4000010]
2020-02-29 08:48:09,299 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [313]: Create upgrade task for configuration file [./wanhao_i3plus_extruder_0+%234_user.inst.cfg] with type [user] and source version [4000010]
2020-02-29 08:48:09,301 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [313]: Create upgrade task for configuration file [./RedLeader_user.inst.cfg] with type [user] and source version [4000010]
2020-02-29 08:48:09,303 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [313]: Create upgrade task for configuration file [./monoprice_select_mini_v2_extruder_0+%232_user.inst.cfg] with type [user] and source version [4000010]
2020-02-29 08:48:09,306 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [313]: Create upgrade task for configuration file [./wanhao_i3plus_extruder_0+%235_user.inst.cfg] with type [user] and source version [4000010]
2020-02-29 08:48:09,308 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [313]: Create upgrade task for configuration file [./Wanhao+Duplicator+i3+Plus+%232_user.inst.cfg] with type [user] and source version [4000010]
2020-02-29 08:48:09,310 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [313]: Create upgrade task for configuration file [./wanhao_i3plus_extruder_0+%236_user.inst.cfg] with type [user] and source version [4000010]
2020-02-29 08:48:09,313 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [313]: Create upgrade task for configuration file [./wanhao_i3plus_extruder_0+%232_user.inst.cfg] with type [user] and source version [4000010]
2020-02-29 08:48:09,315 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [313]: Create upgrade task for configuration file [./Wanhao+Duplicator+i3+Plus_user.inst.cfg] with type [user] and source version [4000010]
2020-02-29 08:48:09,318 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [396]: Upgraded ./wanhao_i3plus_extruder_0+%235_settings.inst.cfg to version 4000011.
2020-02-29 08:48:09,323 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [396]: Upgraded ./wanhao_i3plus_extruder_0+%234_settings.inst.cfg to version 4000011.
2020-02-29 08:48:09,326 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [396]: Upgraded ./wanhao_i3plus_extruder_0+%232_settings.inst.cfg to version 4000011.
2020-02-29 08:48:09,329 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [396]: Upgraded ./GreenLeader_settings.inst.cfg to version 4000011.
2020-02-29 08:48:09,332 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [396]: Upgraded ./RedLeader_settings.inst.cfg to version 4000011.
2020-02-29 08:48:09,335 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [396]: Upgraded ./wanhao_i3plus_extruder_0+%233_settings.inst.cfg to version 4000011.
2020-02-29 08:48:09,338 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [396]: Upgraded ./Wanhao+Duplicator+i3+Plus+%232_settings.inst.cfg to version 4000011.
2020-02-29 08:48:09,341 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [396]: Upgraded ./wanhao_i3plus_extruder_0+%236_settings.inst.cfg to version 4000011.
2020-02-29 08:48:09,344 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [396]: Upgraded ./Monoprice+Select+Mini+V2+%28E3D%29_settings.inst.cfg to version 4000011.
2020-02-29 08:48:09,347 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [396]: Upgraded ./monoprice_select_mini_v2_extruder_0+%232_settings.inst.cfg to version 4000011.
2020-02-29 08:48:09,350 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [396]: Upgraded ./Wanhao+Duplicator+i3+Plus_settings.inst.cfg to version 4000011.
2020-02-29 08:48:09,353 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [396]: Upgraded ./GreyLeader_settings.inst.cfg to version 4000011.
2020-02-29 08:48:09,356 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [396]: Upgraded ./wanhao_i3plus_extruder_0+%236.extruder.cfg to version 4000011.
2020-02-29 08:48:09,359 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [396]: Upgraded ./monoprice_select_mini_v2_extruder_0+%232.extruder.cfg to version 4000011.
2020-02-29 08:48:09,361 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [396]: Upgraded ./wanhao_i3plus_extruder_0+%232.extruder.cfg to version 4000011.
2020-02-29 08:48:09,365 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [396]: Upgraded ./wanhao_i3plus_extruder_0+%235.extruder.cfg to version 4000011.
2020-02-29 08:48:09,368 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [396]: Upgraded ./wanhao_i3plus_extruder_0+%234.extruder.cfg to version 4000011.
2020-02-29 08:48:09,371 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [396]: Upgraded ./wanhao_i3plus_extruder_0+%233.extruder.cfg to version 4000011.
2020-02-29 08:48:09,377 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [396]: Upgraded ./RedLeader.global.cfg to version 4000011.
2020-02-29 08:48:09,380 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [396]: Upgraded ./Wanhao+Duplicator+i3+Plus+%232.global.cfg to version 4000011.
2020-02-29 08:48:09,383 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [396]: Upgraded ./GreenLeader.global.cfg to version 4000011.
2020-02-29 08:48:09,386 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [396]: Upgraded ./GreyLeader.global.cfg to version 4000011.
2020-02-29 08:48:09,389 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [396]: Upgraded ./Monoprice+Select+Mini+V2+%28E3D%29.global.cfg to version 4000011.
2020-02-29 08:48:09,392 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [396]: Upgraded ./Wanhao+Duplicator+i3+Plus.global.cfg to version 4000011.
2020-02-29 08:48:09,396 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [396]: Upgraded ./cura.cfg to version 6000011.
2020-02-29 08:48:09,399 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [396]: Upgraded ./wanhao_i3plus_bluldr_pla%2B_%28esun%29%5Bltblu%5D_010119.inst.cfg to version 4000011.
2020-02-29 08:48:09,402 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [396]: Upgraded ./wanhao_i3plus_orangeleader_pteg_%28esun%29.inst.cfg to version 4000011.
2020-02-29 08:48:09,405 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [396]: Upgraded ./wanhao_i3plus_rdldr_pla%2B_%28esun%29%5Bltblu%5D_010319.inst.cfg to version 4000011.
2020-02-29 08:48:09,408 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [396]: Upgraded ./wanhao_i3plus_extruder_0_%233_gryldr_pla_%28hatchbox%29_%5Bgrey%5D_011420.inst.cfg to version 4000011.
2020-02-29 08:48:09,411 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [396]: Upgraded ./wanhao_i3plus_extruder_0_%235_bluldr_pteg_%28esun%29_%5Bclear%5D_020920.inst.cfg to version 4000011.
2020-02-29 08:48:09,414 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [396]: Upgraded ./wanhao_i3plus_extruder_0_greyleader_pteg_%28esun%29.inst.cfg to version 4000011.
2020-02-29 08:48:09,417 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [396]: Upgraded ./wanhao_i3plus_greyleader_pteg_%28esun%29.inst.cfg to version 4000011.
2020-02-29 08:48:09,420 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [396]: Upgraded ./wanhao_i3plus_extruder_0_%232_orangeleader_pla%2B_%28esun%29%5Bltblu%5D_121219.inst.cfg to version 4000011.
2020-02-29 08:48:09,422 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [396]: Upgraded ./wanhao_i3plus_extruder_0_%235_bluldr_pla_%28hatchbox%29_%5Bred%5D_010320.inst.cfg to version 4000011.
2020-02-29 08:48:09,429 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [396]: Upgraded ./wanhao_i3plus_extruder_0_%233_gryldr_pla%2B_%28esun%29%5Bltblu%5D_122119.inst.cfg to version 4000011.
2020-02-29 08:48:09,434 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [396]: Upgraded ./wanhao_i3plus_extruder_0_%232_orldr_pla%2B_%28sunlu%29%5Bgreen%5D_010420.inst.cfg to version 4000011.
2020-02-29 08:48:09,438 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [396]: Upgraded ./wanhao_i3plus_bluldr_pla%2B_%28esun%29%5Bblack%5D_010520.inst.cfg to version 4000011.
2020-02-29 08:48:09,442 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [396]: Upgraded ./wanhao_i3plus_orangeleader_pla%2B_%28esun%29%5Bltblu%5D_121219.inst.cfg to version 4000011.
2020-02-29 08:48:09,446 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [396]: Upgraded ./wanhao_i3plus_gryldr_pla%2B_%28esun%29%5Bltblu%5D_122119.inst.cfg to version 4000011.
2020-02-29 08:48:09,450 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [396]: Upgraded ./wanhao_i3plus_bluldr_pteg_%28esun%29_%5Bclear%5D_020920.inst.cfg to version 4000011.
2020-02-29 08:48:09,457 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [396]: Upgraded ./wanhao_i3plus_bluldr_pla_%28hatchbox%29_%5Bred%5D_010320.inst.cfg to version 4000011.
2020-02-29 08:48:09,463 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [396]: Upgraded ./wanhao_i3plus_orldr_pla%2B_%28sunlu%29%5Bgreen%5D_010420.inst.cfg to version 4000011.
2020-02-29 08:48:09,470 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [396]: Upgraded ./wanhao_i3plus_extruder_0_%235_orangeleader_pteg_%28esun%29.inst.cfg to version 4000011.
2020-02-29 08:48:09,477 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [396]: Upgraded ./wanhao_i3plus_extruder_0_%236_rdldr_pla%2B_%28esun%29%5Bltblu%5D_010319.inst.cfg to version 4000011.
2020-02-29 08:48:09,486 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [396]: Upgraded ./wanhao_i3plus_extruder_0_%235_bluldr_pla%2B_%28esun%29%5Bblack%5D_010520.inst.cfg to version 4000011.
2020-02-29 08:48:09,493 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [396]: Upgraded ./wanhao_i3plus_gryldr_pla_%28hatchbox%29_%5Bgrey%5D_011420.inst.cfg to version 4000011.
2020-02-29 08:48:09,500 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [396]: Upgraded ./wanhao_i3plus_extruder_0_%235_bluldr_pla%2B_%28esun%29%5Bltblu%5D_010119.inst.cfg to version 4000011.
2020-02-29 08:48:09,507 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [396]: Upgraded ./wanhao_i3plus_extruder_0+%233_user.inst.cfg to version 4000011.
2020-02-29 08:48:09,513 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [396]: Upgraded ./Monoprice+Select+Mini+V2+%28E3D%29_user.inst.cfg to version 4000011.
2020-02-29 08:48:09,520 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [396]: Upgraded ./GreyLeader_user.inst.cfg to version 4000011.
2020-02-29 08:48:09,528 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [396]: Upgraded ./GreenLeader_user.inst.cfg to version 4000011.
2020-02-29 08:48:09,537 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [396]: Upgraded ./wanhao_i3plus_extruder_0+%234_user.inst.cfg to version 4000011.
2020-02-29 08:48:09,544 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [396]: Upgraded ./RedLeader_user.inst.cfg to version 4000011.
2020-02-29 08:48:09,549 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [396]: Upgraded ./monoprice_select_mini_v2_extruder_0+%232_user.inst.cfg to version 4000011.
2020-02-29 08:48:09,556 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [396]: Upgraded ./wanhao_i3plus_extruder_0+%235_user.inst.cfg to version 4000011.
2020-02-29 08:48:09,563 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [396]: Upgraded ./Wanhao+Duplicator+i3+Plus+%232_user.inst.cfg to version 4000011.
2020-02-29 08:48:09,570 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [396]: Upgraded ./wanhao_i3plus_extruder_0+%236_user.inst.cfg to version 4000011.
2020-02-29 08:48:09,577 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [396]: Upgraded ./wanhao_i3plus_extruder_0+%232_user.inst.cfg to version 4000011.
2020-02-29 08:48:09,586 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [396]: Upgraded ./Wanhao+Duplicator+i3+Plus_user.inst.cfg to version 4000011.
2020-02-29 08:48:12,615 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.loadAllMetadata [330]: Loading metadata into container registry took 2.855445146560669 seconds
2020-02-29 08:48:12,810 - DEBUG - [MainThread] cura.Scene.CuraSceneController.setActiveBuildPlate [111]: Select build plate: 0
2020-02-29 08:48:12,813 - INFO - [MainThread] cura.CuraApplication.run [761]: Initializing machine error checker
2020-02-29 08:48:13,046 - INFO - [MainThread] cura.UI.MachineActionManager.addDefaultMachineActions [72]: Default machine actions added for machine definition [wanhao_i3plus]
2020-02-29 08:48:13,338 - WARNING - [MainThread] LocalContainerProvider.LocalContainerProvider._saveCachedDefinition [271]: The definition cache for definition fdmprinter failed to pickle.
2020-02-29 08:48:13,548 - INFO - [MainThread] cura.Settings.GlobalStack.addExtruder [184]: Extruder[wanhao_i3plus_extruder_0 #3] added to [GreyLeader] at position [0]
2020-02-29 08:48:13,550 - WARNING - [MainThread] cura.Settings.ExtruderManager.registerExtruder [156]: Extruder [wanhao_i3plus_extruder_0 #3] has already been registered on machine [GreyLeader], not doing anything
2020-02-29 08:48:13,551 - INFO - [MainThread] FirmwareUpdateChecker.FirmwareUpdateChecker.checkFirmwareVersion [74]: No machine with name Wanhao Duplicator i3 Plus in list of firmware to check.
2020-02-29 08:48:13,704 - DEBUG - [MainThread] cura.Machines.ContainerTree.__getitem__ [106]: Adding container tree for wanhao_i3plus took 0.12599706649780273 seconds.
2020-02-29 08:48:13,708 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: BQ_PauseAtHeight
2020-02-29 08:48:13,711 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: ChangeAtZ
2020-02-29 08:48:13,712 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: ColorMix
2020-02-29 08:48:13,713 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: DisplayFilenameAndLayerOnLCD
2020-02-29 08:48:13,715 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: DisplayRemainingTimeOnLCD
2020-02-29 08:48:13,716 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: FilamentChange
2020-02-29 08:48:13,718 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: InsertAtLayerChange
2020-02-29 08:48:13,721 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: PauseAtHeight
2020-02-29 08:48:13,722 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: PauseAtHeightRepRapFirmwareDuet
2020-02-29 08:48:13,724 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: PauseAtHeightforRepetier
2020-02-29 08:48:13,725 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: RetractContinue
2020-02-29 08:48:13,727 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: SearchAndReplace
2020-02-29 08:48:13,732 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: Stretch
2020-02-29 08:48:13,733 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: TimeLapse
2020-02-29 08:48:13,734 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: UsePreviousProbeMeasurements
2020-02-29 08:48:13,828 - INFO - [MainThread] cura.CuraApplication.run [766]: Initializing machine manager
2020-02-29 08:48:13,848 - INFO - [MainThread] cura.CuraApplication.run [771]: Initializing container manager
2020-02-29 08:48:13,929 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-02-29 08:48:13,945 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [303]: Connection with instance GreyLeader with url http://192.168.2.156:80/ started
2020-02-29 08:48:14,034 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [135]: New error check scheduled.
2020-02-29 08:48:14,069 - DEBUG - [MainThread] UM.Scene.Camera._preferencesChanged [246]: Changing perspective mode to perspective.
2020-02-29 08:48:14,096 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device GreyLeader already added
2020-02-29 08:48:14,122 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Blue Leader"._octoprint._tcp.local
2020-02-29 08:48:14,428 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Darth Pooky"._octoprint._tcp.local
2020-02-29 08:48:14,430 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Orange Leader"._octoprint._tcp.local
2020-02-29 08:48:14,481 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [158]: Loading theme file: /Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/themes/cura-dark/theme.json
2020-02-29 08:48:14,483 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [158]: Loading theme file: /Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/themes/cura-light/theme.json
2020-02-29 08:48:14,667 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [231]: Loaded theme /Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/themes/cura-light
2020-02-29 08:48:14,670 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [231]: Loaded theme /Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/themes/cura-dark
2020-02-29 08:48:15,129 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin._createView [304]: Creating post processing plugin view.
2020-02-29 08:48:15,224 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin._createView [314]: Post processing view created.
2020-02-29 08:48:15,417 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._parseJWT [91]: There was no auth data or access token
2020-02-29 08:48:15,420 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._parseJWT [91]: There was no auth data or access token
2020-02-29 08:48:15,424 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._parseJWT [91]: There was no auth data or access token
2020-02-29 08:48:15,427 - WARNING - [MainThread] UM.Qt.Bindings.Theme.getImage [133]: No image header_pattern defined in Theme
2020-02-29 08:48:15,861 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-02-29 08:48:15,864 - WARNING - [MainThread] UM.Decorators.deprecated_function [20]: <function GlobalStack.extruders at 0x6000071d8498> is deprecated (since 4.4): Please use extruderList instead.
2020-02-29 08:48:16,280 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:125:27: Unable to assign [undefined] to int
2020-02-29 08:48:16,282 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:76:29: Unable to assign null to double
2020-02-29 08:48:16,288 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._createAdditionalComponentsView [350]: Creating additional ui components for OctoPrint-connected printers.
2020-02-29 08:48:16,295 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/Resources/qml/QtQuick/Controls/Button.qml:99: TypeError: Cannot read property of null
2020-02-29 08:48:16,297 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/OctoPrintComponents.qml:25:16: Unable to assign [undefined] to QQmlComponent*
2020-02-29 08:48:16,298 - DEBUG - [MainThread] MaterialSettingsPlugin.MaterialSettingsPlugin._onEngineCreated [64]: Replacing Materials preferencepane with patched version
2020-02-29 08:48:16,304 - DEBUG - [MainThread] UM.Controller.setActiveStage [149]: Setting active stage to PrepareStage
2020-02-29 08:48:16,373 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-02-29 08:48:16,433 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 08:48:16,436 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 08:48:16,439 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/plugins/plugins/PrepareStage/PrepareMain.qml:16:5: QML ActionPanelWidget: Binding loop detected for property "width"
2020-02-29 08:48:16,441 - DEBUG - [MainThread] UM.Controller.setActiveView [91]: Setting active view to SolidView
2020-02-29 08:48:16,443 - DEBUG - [MainThread] SliceInfoPlugin.SliceInfo._createDialog [71]: Creating dialog [MoreInfoWindow.qml]
2020-02-29 08:48:16,455 - DEBUG - [MainThread] ModelChecker.ModelChecker._createView [109]: Creating model checker view.
2020-02-29 08:48:16,459 - DEBUG - [MainThread] ModelChecker.ModelChecker._createView [118]: Model checker view created.
2020-02-29 08:48:16,460 - DEBUG - [MainThread] Toolbox.src.Toolbox._makeRequestByType [536]: Requesting [updates] metadata from server.
2020-02-29 08:48:16,463 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.getAccessToken [114]: No auth data to retrieve the access_token from
2020-02-29 08:48:16,465 - WARNING - [MainThread] UM.Logger.warning [117]: Cannot add authorization to Cloud Api request
2020-02-29 08:48:16,765 - DEBUG - [MainThread] cura.CuraApplication.run [809]: Booting Cura took 10.402557134628296 seconds
2020-02-29 08:48:16,780 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [741]: Set OctoPrint camera url to http://192.168.2.156:80/webcam/?action=stream
2020-02-29 08:48:17,075 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._processRequest [308]: Request [262a4fd8680e4d2eabd49ae7b8d5a442] started
2020-02-29 08:48:17,078 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-02-29 08:48:17,080 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-02-29 08:48:17,094 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-02-29 08:48:17,102 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-02-29 08:48:17,112 - INFO - [MainThread] FirmwareUpdateChecker.FirmwareUpdateChecker.checkFirmwareVersion [74]: No machine with name Monoprice Select Mini V2 (E3D) in list of firmware to check.
2020-02-29 08:48:17,115 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-02-29 08:48:17,121 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-02-29 08:48:17,130 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-02-29 08:48:17,137 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-02-29 08:48:17,150 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-02-29 08:48:17,164 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-02-29 08:48:17,176 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [63]: Updating QualityProfilesDropDownMenuModel.
2020-02-29 08:48:17,916 - DEBUG - [MainThread] UM.Qt.QtRenderer._initialize [188]: Support for Vertex Array Objects: True
2020-02-29 08:48:17,920 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [111]: Initialized OpenGL subsystems.
2020-02-29 08:48:17,922 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [112]: OpenGL Version:  4.1 INTEL-14.4.23
2020-02-29 08:48:17,923 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [113]: OpenGL Vendor:   Intel Inc.
2020-02-29 08:48:17,926 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [114]: OpenGL Renderer: Intel(R) Iris(TM) Plus Graphics 655
2020-02-29 08:48:17,927 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [115]: GLSL Version:    4.10.0
2020-02-29 08:48:17,929 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/default.shader]...
2020-02-29 08:48:17,934 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/selection.shader]...
2020-02-29 08:48:17,938 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/select_face.shader]...
2020-02-29 08:48:17,942 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/default.shader]...
2020-02-29 08:48:17,946 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/composite.shader]...
2020-02-29 08:48:17,951 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/overhang.shader]...
2020-02-29 08:48:17,956 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/striped.shader]...
2020-02-29 08:48:17,962 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/transparent_object.shader]...
2020-02-29 08:48:17,967 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/striped.shader]...
2020-02-29 08:48:17,974 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/default.shader]...
2020-02-29 08:48:17,978 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/grid.shader]...
2020-02-29 08:48:17,984 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/platform.shader]...
2020-02-29 08:48:18,199 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-02-29 08:48:18,208 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [63]: Updating QualityProfilesDropDownMenuModel.
2020-02-29 08:48:18,827 - DEBUG - [Thread-3] cura.Machines.ContainerTree.__getitem__ [106]: Adding container tree for monoprice_select_mini_v2 took 0.545400857925415 seconds.
2020-02-29 08:48:19,246 - INFO - [MainThread] cura.Machines.MachineErrorChecker._setResult [187]: Error check finished, result = False, time = 5.2s
2020-02-29 08:48:19,263 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestFinished [369]: Request [262a4fd8680e4d2eabd49ae7b8d5a442] finished.
2020-02-29 08:48:19,266 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-02-29 08:48:28,991 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-02-29 08:48:38,990 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-02-29 08:48:59,987 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-02-29 08:49:14,001 - DEBUG - [MainThread] cura.TaskManagement.OnExitCallbackManager.triggerNextCallback [51]: No more on-app-exit callbacks to process. Tell the app to exit.
2020-02-29 08:49:14,010 - INFO - [MainThread] cura.CuraApplication.closeApplication [592]: Close application
2020-02-29 08:49:14,016 - DEBUG - [MainThread] UM.Qt.QtApplication.windowClosed [462]: Shutting down cura
2020-02-29 08:49:14,040 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._terminate [292]: Attempting to kill the engine process
2020-02-29 08:49:14,040 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._terminate [298]: Killing engine process
2020-02-29 08:49:14,041 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._terminate [301]: Engine process is killed. Received return code -15
2020-02-29 09:31:43,595 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin FileLogger
2020-02-29 09:31:43,601 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin LegacyProfileReader
2020-02-29 09:31:43,606 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin AMFReader
2020-02-29 09:31:43,611 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin SimpleView
2020-02-29 09:31:43,617 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin SolidView
2020-02-29 09:31:43,625 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin FirmwareUpdateChecker
2020-02-29 09:31:43,630 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin SentryLogger
2020-02-29 09:31:43,639 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin SupportEraser
2020-02-29 09:31:43,644 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin PrepareStage
2020-02-29 09:31:43,692 - WARNING - [MainThread] UM.PluginRegistry.loadPlugin [412]: Plugin [CuraInventorPlugin] with supported sdk versions [['5.0.0', '6.0.0', '6.1.0', '5.0.0']] is incompatible with the current sdk version [7.1.0].
2020-02-29 09:31:43,700 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin LinearAdvanceSettingPlugin
2020-02-29 09:31:43,705 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin VersionInTitlebarPlugin
2020-02-29 09:31:43,712 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin OrientationPlugin
2020-02-29 09:31:43,727 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin OctoPrintPlugin
2020-02-29 09:31:43,734 - DEBUG - [MainThread] SidebarGUIPlugin.__matchVersion [48]: This version of the plugin is not compatible with this version of Cura. Please check for an update.
2020-02-29 09:31:43,734 - WARNING - [MainThread] SidebarGUIPlugin.register [23]: Plugin not loaded because of a version mismatch
2020-02-29 09:31:43,737 - WARNING - [MainThread] UM.PluginRegistry.loadPlugin [419]: Plugin SidebarGUIPlugin did not return any objects to register
2020-02-29 09:31:43,744 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin MeshTools
2020-02-29 09:31:43,749 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin ZOffsetPlugin
2020-02-29 09:31:43,755 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin CustomSupports
2020-02-29 09:31:43,762 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin MaterialSettingsPlugin
2020-02-29 09:31:43,764 - DEBUG - [MainThread] UM.PluginRegistry.loadPlugins [369]: Loading all plugins took 0.8583769798278809 seconds
2020-02-29 09:31:43,772 - INFO - [MainThread] UM.VersionUpgradeManager.upgrade [148]: Looking for old configuration files to upgrade.
2020-02-29 09:31:43,872 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-02-29 09:31:43,875 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-02-29 09:31:43,879 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-02-29 09:31:43,883 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-02-29 09:31:43,886 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-02-29 09:31:43,890 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-02-29 09:31:43,894 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-02-29 09:31:43,897 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-02-29 09:31:43,901 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-02-29 09:31:43,905 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-02-29 09:31:43,908 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-02-29 09:31:43,912 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-02-29 09:31:43,915 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-02-29 09:31:44,009 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ../3D4MakersFacilanC8/3d4makers_facilan_c8.xml.fdm_material, skip it
2020-02-29 09:31:47,271 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.loadAllMetadata [330]: Loading metadata into container registry took 3.118446111679077 seconds
2020-02-29 09:31:47,494 - DEBUG - [MainThread] cura.Scene.CuraSceneController.setActiveBuildPlate [111]: Select build plate: 0
2020-02-29 09:31:47,498 - INFO - [MainThread] cura.CuraApplication.run [761]: Initializing machine error checker
2020-02-29 09:31:47,563 - INFO - [MainThread] cura.UI.MachineActionManager.addDefaultMachineActions [72]: Default machine actions added for machine definition [wanhao_i3plus]
2020-02-29 09:31:47,870 - WARNING - [MainThread] LocalContainerProvider.LocalContainerProvider._saveCachedDefinition [271]: The definition cache for definition fdmprinter failed to pickle.
2020-02-29 09:31:48,094 - INFO - [MainThread] cura.Settings.GlobalStack.addExtruder [184]: Extruder[wanhao_i3plus_extruder_0 #3] added to [GreyLeader] at position [0]
2020-02-29 09:31:48,097 - WARNING - [MainThread] cura.Settings.ExtruderManager.registerExtruder [156]: Extruder [wanhao_i3plus_extruder_0 #3] has already been registered on machine [GreyLeader], not doing anything
2020-02-29 09:31:48,098 - INFO - [MainThread] FirmwareUpdateChecker.FirmwareUpdateChecker.checkFirmwareVersion [74]: No machine with name Wanhao Duplicator i3 Plus in list of firmware to check.
2020-02-29 09:31:48,254 - DEBUG - [MainThread] cura.Machines.ContainerTree.__getitem__ [106]: Adding container tree for wanhao_i3plus took 0.13206005096435547 seconds.
2020-02-29 09:31:48,258 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: BQ_PauseAtHeight
2020-02-29 09:31:48,259 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: ChangeAtZ
2020-02-29 09:31:48,260 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: ColorMix
2020-02-29 09:31:48,261 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: DisplayFilenameAndLayerOnLCD
2020-02-29 09:31:48,262 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: DisplayRemainingTimeOnLCD
2020-02-29 09:31:48,263 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: FilamentChange
2020-02-29 09:31:48,263 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: InsertAtLayerChange
2020-02-29 09:31:48,264 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: PauseAtHeight
2020-02-29 09:31:48,265 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: PauseAtHeightRepRapFirmwareDuet
2020-02-29 09:31:48,266 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: PauseAtHeightforRepetier
2020-02-29 09:31:48,267 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: RetractContinue
2020-02-29 09:31:48,268 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: SearchAndReplace
2020-02-29 09:31:48,269 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: Stretch
2020-02-29 09:31:48,269 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: TimeLapse
2020-02-29 09:31:48,270 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: UsePreviousProbeMeasurements
2020-02-29 09:31:48,367 - INFO - [MainThread] cura.CuraApplication.run [766]: Initializing machine manager
2020-02-29 09:31:48,372 - INFO - [MainThread] cura.CuraApplication.run [771]: Initializing container manager
2020-02-29 09:31:48,477 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-02-29 09:31:48,493 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [303]: Connection with instance GreyLeader with url http://192.168.2.156:80/ started
2020-02-29 09:31:48,587 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [135]: New error check scheduled.
2020-02-29 09:31:48,615 - DEBUG - [MainThread] UM.Scene.Camera._preferencesChanged [246]: Changing perspective mode to perspective.
2020-02-29 09:31:48,941 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device GreyLeader already added
2020-02-29 09:31:49,051 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [158]: Loading theme file: /Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/themes/cura-dark/theme.json
2020-02-29 09:31:49,052 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Darth Pooky"._octoprint._tcp.local
2020-02-29 09:31:49,055 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [158]: Loading theme file: /Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/themes/cura-light/theme.json
2020-02-29 09:31:49,294 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [231]: Loaded theme /Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/themes/cura-light
2020-02-29 09:31:49,298 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [231]: Loaded theme /Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/themes/cura-dark
2020-02-29 09:31:49,665 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Blue Leader"._octoprint._tcp.local
2020-02-29 09:31:49,665 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Orange Leader"._octoprint._tcp.local
2020-02-29 09:31:49,780 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin._createView [304]: Creating post processing plugin view.
2020-02-29 09:31:49,917 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin._createView [314]: Post processing view created.
2020-02-29 09:31:50,093 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._parseJWT [91]: There was no auth data or access token
2020-02-29 09:31:50,095 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._parseJWT [91]: There was no auth data or access token
2020-02-29 09:31:50,099 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._parseJWT [91]: There was no auth data or access token
2020-02-29 09:31:50,102 - WARNING - [MainThread] UM.Qt.Bindings.Theme.getImage [133]: No image header_pattern defined in Theme
2020-02-29 09:31:50,578 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-02-29 09:31:50,582 - WARNING - [MainThread] UM.Decorators.deprecated_function [20]: <function GlobalStack.extruders at 0x600006f04c78> is deprecated (since 4.4): Please use extruderList instead.
2020-02-29 09:31:50,709 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:125:27: Unable to assign [undefined] to int
2020-02-29 09:31:50,712 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:76:29: Unable to assign null to double
2020-02-29 09:31:50,721 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._createAdditionalComponentsView [350]: Creating additional ui components for OctoPrint-connected printers.
2020-02-29 09:31:50,729 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/Resources/qml/QtQuick/Controls/Button.qml:99: TypeError: Cannot read property of null
2020-02-29 09:31:50,731 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/OctoPrintComponents.qml:25:16: Unable to assign [undefined] to QQmlComponent*
2020-02-29 09:31:50,733 - DEBUG - [MainThread] MaterialSettingsPlugin.MaterialSettingsPlugin._onEngineCreated [64]: Replacing Materials preferencepane with patched version
2020-02-29 09:31:50,741 - DEBUG - [MainThread] UM.Controller.setActiveStage [149]: Setting active stage to PrepareStage
2020-02-29 09:31:50,813 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-02-29 09:31:50,882 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 09:31:50,886 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 09:31:50,890 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/plugins/plugins/PrepareStage/PrepareMain.qml:16:5: QML ActionPanelWidget: Binding loop detected for property "width"
2020-02-29 09:31:50,893 - DEBUG - [MainThread] UM.Controller.setActiveView [91]: Setting active view to SolidView
2020-02-29 09:31:50,905 - DEBUG - [MainThread] SliceInfoPlugin.SliceInfo._createDialog [71]: Creating dialog [MoreInfoWindow.qml]
2020-02-29 09:31:50,919 - DEBUG - [MainThread] ModelChecker.ModelChecker._createView [109]: Creating model checker view.
2020-02-29 09:31:50,924 - DEBUG - [MainThread] ModelChecker.ModelChecker._createView [118]: Model checker view created.
2020-02-29 09:31:50,926 - DEBUG - [MainThread] Toolbox.src.Toolbox._makeRequestByType [536]: Requesting [updates] metadata from server.
2020-02-29 09:31:50,929 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.getAccessToken [114]: No auth data to retrieve the access_token from
2020-02-29 09:31:50,932 - WARNING - [MainThread] UM.Logger.warning [117]: Cannot add authorization to Cloud Api request
2020-02-29 09:31:51,111 - DEBUG - [MainThread] cura.CuraApplication.run [809]: Booting Cura took 8.52692198753357 seconds
2020-02-29 09:31:51,136 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [741]: Set OctoPrint camera url to http://192.168.2.156:80/webcam/?action=stream
2020-02-29 09:31:51,446 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._processRequest [308]: Request [f66ffb6977a34ad3a30fec92982f0eb7] started
2020-02-29 09:31:51,449 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-02-29 09:31:51,457 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-02-29 09:31:51,471 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-02-29 09:31:51,480 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-02-29 09:31:51,488 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-02-29 09:31:51,497 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-02-29 09:31:51,504 - INFO - [MainThread] FirmwareUpdateChecker.FirmwareUpdateChecker.checkFirmwareVersion [74]: No machine with name Monoprice Select Mini V2 (E3D) in list of firmware to check.
2020-02-29 09:31:51,507 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-02-29 09:31:51,515 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-02-29 09:31:51,523 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-02-29 09:31:51,545 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-02-29 09:31:51,559 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [63]: Updating QualityProfilesDropDownMenuModel.
2020-02-29 09:31:52,179 - DEBUG - [MainThread] UM.Qt.QtRenderer._initialize [188]: Support for Vertex Array Objects: True
2020-02-29 09:31:52,184 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [111]: Initialized OpenGL subsystems.
2020-02-29 09:31:52,187 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [112]: OpenGL Version:  4.1 INTEL-14.4.23
2020-02-29 09:31:52,190 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [113]: OpenGL Vendor:   Intel Inc.
2020-02-29 09:31:52,193 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [114]: OpenGL Renderer: Intel(R) Iris(TM) Plus Graphics 655
2020-02-29 09:31:52,195 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [115]: GLSL Version:    4.10.0
2020-02-29 09:31:52,198 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/default.shader]...
2020-02-29 09:31:52,205 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/selection.shader]...
2020-02-29 09:31:52,211 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/select_face.shader]...
2020-02-29 09:31:52,219 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/default.shader]...
2020-02-29 09:31:52,224 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/composite.shader]...
2020-02-29 09:31:52,232 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/overhang.shader]...
2020-02-29 09:31:52,241 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/striped.shader]...
2020-02-29 09:31:52,247 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/transparent_object.shader]...
2020-02-29 09:31:52,253 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/striped.shader]...
2020-02-29 09:31:52,260 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/default.shader]...
2020-02-29 09:31:52,266 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/grid.shader]...
2020-02-29 09:31:52,272 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/platform.shader]...
2020-02-29 09:31:52,459 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestFinished [369]: Request [f66ffb6977a34ad3a30fec92982f0eb7] finished.
2020-02-29 09:31:52,463 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-02-29 09:31:52,945 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-02-29 09:31:52,953 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [63]: Updating QualityProfilesDropDownMenuModel.
2020-02-29 09:31:54,343 - DEBUG - [Thread-3] cura.Machines.ContainerTree.__getitem__ [106]: Adding container tree for monoprice_select_mini_v2 took 1.1977148056030273 seconds.
2020-02-29 09:31:54,464 - INFO - [MainThread] cura.Machines.MachineErrorChecker._setResult [187]: Error check finished, result = False, time = 5.9s
2020-02-29 09:32:01,985 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-02-29 09:32:12,434 - INFO - [Thread-4] STLReader.STLReader.load_file [51]: Using NumPy-STL to load STL data.
2020-02-29 09:32:12,443 - DEBUG - [Thread-4] UM.Mesh.MeshData.calculateNormalsFromVertices [495]: Calculating normals took 0.0009908676147460938 seconds
2020-02-29 09:32:12,443 - DEBUG - [Thread-4] STLReader.STLReader._read [102]: Loaded a mesh with 180 vertices
2020-02-29 09:32:12,455 - DEBUG - [Thread-4] UM.Mesh.MeshData.approximateConvexHull [452]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.007261991500854492 seconds. 10 input vertices. 10 output vertices.
2020-02-29 09:32:12,462 - DEBUG - [Thread-4] UM.FileHandler.ReadFileJob.run [71]: Loading file took 0.0 seconds
2020-02-29 09:32:12,467 - DEBUG - [Thread-4] UM.Mesh.MeshData.approximateConvexHull [452]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.0017261505126953125 seconds. 10 input vertices. 10 output vertices.
2020-02-29 09:32:12,530 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: <UM.Operations.AddSceneNodeOperation.AddSceneNodeOperation object at 0x600013f6ec98>, took 3ms
2020-02-29 09:32:12,545 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/transparent_object.shader]...
2020-02-29 09:32:15,904 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/toolhandle.shader]...
2020-02-29 09:32:17,355 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/toolhandle.shader]...
2020-02-29 09:32:18,445 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'JST Join Jig.stl'>,rot.=Q<0.13052619222005157,0.0,0.0,w=0.9914448613738104>), took 2ms
2020-02-29 09:32:18,549 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'JST Join Jig.stl'>,rot.=Q<0.3826834323650898,0.0,0.0,w=0.9238795325112867>), took 5ms
2020-02-29 09:32:18,648 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'JST Join Jig.stl'>,rot.=Q<0.25881904510252074,0.0,0.0,w=0.9659258262890683>), took 3ms
2020-02-29 09:32:18,759 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'JST Join Jig.stl'>,rot.=Q<0.25881904510252074,0.0,0.0,w=0.9659258262890683>), took 2ms
2020-02-29 09:32:18,862 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'JST Join Jig.stl'>,rot.=Q<0.13052619222005157,0.0,0.0,w=0.9914448613738104>), took 3ms
2020-02-29 09:32:18,964 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'JST Join Jig.stl'>,rot.=Q<0.13052619222005157,0.0,0.0,w=0.9914448613738104>), took 2ms
2020-02-29 09:32:19,064 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'JST Join Jig.stl'>,rot.=Q<0.13052619222005157,0.0,0.0,w=0.9914448613738104>), took 2ms
2020-02-29 09:32:19,536 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'JST Join Jig.stl'>,rot.=Q<0.13052619222005157,0.0,0.0,w=0.9914448613738104>), took 3ms
2020-02-29 09:32:22,990 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-02-29 09:32:35,010 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/Resources/qml/UM/Dialog.qml:86:13: QML Loader: Binding loop detected for property "active"
2020-02-29 09:32:35,551 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [215]: Trying to access OctoPrint instance at http://192.168.2.156:80/ with the provided API key.
2020-02-29 09:32:37,138 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [418]: API key accepted by OctoPrint.
2020-02-29 09:32:45,279 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.disconnect [315]: Connection with instance GreyLeader with url http://192.168.2.156:80/ stopped
2020-02-29 09:32:45,288 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-02-29 09:32:45,292 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device GreyLeader already added
2020-02-29 09:32:45,293 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [303]: Connection with instance GreyLeader with url http://192.168.2.156:80/ started
2020-02-29 09:32:45,302 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/Resources/qml/UM/Dialog.qml:86:13: QML Loader: Binding loop detected for property "active"
2020-02-29 09:32:45,493 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device GreyLeader already added
2020-02-29 09:32:45,849 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [215]: Trying to access OctoPrint instance at http://192.168.2.156:80/ with the provided API key.
2020-02-29 09:32:45,884 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Blue Leader"._octoprint._tcp.local
2020-02-29 09:32:45,885 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Orange Leader"._octoprint._tcp.local
2020-02-29 09:32:45,886 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Darth Pooky"._octoprint._tcp.local
2020-02-29 09:32:46,381 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [215]: Trying to access OctoPrint instance at http://192.168.2.156:80/ with the provided API key.
2020-02-29 09:32:47,124 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [741]: Set OctoPrint camera url to http://192.168.2.156:80/webcam/?action=stream
2020-02-29 09:32:48,614 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [418]: API key accepted by OctoPrint.
2020-02-29 09:32:50,309 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [418]: API key accepted by OctoPrint.
2020-02-29 09:33:07,580 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [225]: Starting to slice...
2020-02-29 09:33:07,580 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [243]: Going to slice build plate [0]!
2020-02-29 09:33:07,588 - WARNING - [Thread-5] UM.Decorators.deprecated_function [20]: <function GlobalStack.extruders at 0x600006f04c78> is deprecated (since 4.4): Please use extruderList instead.
2020-02-29 09:33:07,911 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onStartSliceCompleted [429]: Sending slice message took 0.330578088760376 seconds
2020-02-29 09:33:08,120 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING]  -s extruders_enabled_count="1" -s support_interface_density="100" -s cool_fan_speed="100.0" -s raft_base_thickness="0.36" -s bridge_skin_material_flow="60" -s slicing_tolerance="middle" -s material_end_of_filament_purge_speed="0.5" -s prime_tower_size="20" -s retraction_retract_speed="25" -s speed_layer_0="30.0" -s infill="0" -s small_feature_speed_factor="50" -s speed_prime_tower="60" -s support_brim_enable="False" -s infill_multiplier="1" -s gradual_support_infill_steps="0" -s initial_extruder_nr="0" -s infill_extruder_nr="-1" -s infill_sparse_density="20" -s bottom_skin_expand_distance="0.8" -s machine_nozzle_cool_down_speed="2.0" -s infill_offset_x="0" -s machine_depth="190" -s adhesion_z_offset_extensive_processing="False" -s limit_support_retractions="True" -s machine_max_acceleration_y="9000" -s infill_offset_y="0" -s acceleration_print_layer_0="3000" -s wall_min_flow_retract="False" -s speed_support_roof="20.0" -s xy_offset_layer_0="0" -s adhesion_type="skirt" -s z_seam_position="back" -s material_guid="" -s magic_spiralize="False" -s material_linear_advance_factor_support_interface="0" -s machine_max_acceleration_x="9000" -s material_linear_advance_factor_infill="0" -s print_temperature="210" -s skin_angles="[ ]" -s gradual_support_infill_step_height="1" -s support_conical_angle="30" -s raft_surface_acceleration="3000" -s jerk_layer_0="20" -s machine_max_feedrate_x="299792458000" -s support_pattern="lines" -s jerk_infill="20" -s speed_equalize_flow_enabled="False" -s top_thickness="0.8" -s bottom_skin_preshrink="0.8" -s raft_surface_line_spacing="0.4" -s wall_line_width="0.4" -s xy_offset="0" -s alternate_carve_order="True" -s travel_avoid_other_parts="True" -s raft_interface_speed="22.5" -s travel_avoid_distance="0.625" -s support_interface_height="1" -s jerk_travel_layer_0="30.0" -s date="29-02-2020" -s wireframe_flow="100" -s machine_acceleration="4000" -s machine_minimum_feedrate="0.0" -s skin_preshrink="0.8" -s jerk_wall="20" -s retract_at_layer_change="False" -s jerk_travel="30" -s support_skip_some_zags="False" -s minimum_roof_area="1.0" -s wireframe_flow_connection="100" -s bridge_skin_density="100" -s skirt_brim_line_width="0.4" -s top_bottom_pattern="lines" -s travel_compensate_overlapping_walls_0_enabled="True" -s flow_rate_max_extrusion_offset="0" -s material_diameter="2.85" -s support_bottom_line_width="0.4" -s raft_smoothing="5" -s speed_topbottom="30.0" -s wireframe_drag_along="0.6" -s material_break_speed="25" -s raft_interface_acceleration="3000" -s minimum_polygon_circumference="1.0" -s support_interface_skip_height="0.3" -s speed_print="60" -s skin_edge_support_layers="0" -s support_type="buildplate" -s support_roof_line_width="0.4" -s wireframe_printspeed_bottom="5" -s raft_surface_line_width="0.4" -s prime_tower_min_volume="6" -s prime_blob_enable="False" -s switch_extruder_prime_speed="20" -s wall_x_extruder_nr="-1" -s machine_steps_per_mm_z="50" -s smooth_spiralized_contours="True" -s ooze_shield_dist="2" -s bridge_wall_material_flow="50" -s cool_fan_full_layer="2" -s roofing_material_flow="100" -s wipe_hop_speed="10" -s infill_angles="[ ]" -s infill_line_distance="4.0" -s minimum_bottom_area="1.0" -s minimum_support_area="0.0" -s material_linear_advance_factor_wall_0="0" -s wall_0_wipe_dist="0.2" -s switch_extruder_extra_prime_amount="0" -s material_extrusion_cool_down_speed="0.7" -s wall_x_material_flow="100" -s support_xy_distance_overhang="0.2" -s wireframe_printspeed_up="5" -s resolution="0" -s retraction_hop="1" -s jerk_wall_0="20" -s skin_material_flow="100" -s support_bottom_density="100" -s jerk_support_interface="20" -s material_print_temperature_layer_0="210" -s retraction_min_travel="0.8" -s support_xy_overrides_z="z_overrides_xy" -s min_infill_area="0" -s machine_nozzle_tip_outer_diameter="1" -s machine_steps_per_mm_x="50" -s material_break_preparation_temperature="210" -s machine_nozzle_size="0.4" -s support_initial_layer_line_distance="0" -s center_object="False" -s spaghetti_inset="0.2" -s mold_enabled="False" -s acceleration_travel="5000" -s acceleration_wall="3000" -s support_bottom_material_flow="100" -s ironing_enabled="False" -s cooling="0" -s support_infill_angles="[ ]" -s shell="0" -s bridge_skin_material_flow_2="100" -s speed_support_interface="40.0" -s meshfix="0" -s acceleration_skirt_brim="3000" -s support_line_distance="0" -s retraction_enable="True" -s retraction_hop_enabled="False" -s switch_extruder_retraction_speed="20" -s acceleration_roofing="3000" -s anti_overhang_mesh="False" -s cool_min_layer_time_fan_speed_max="10" -s wipe_retraction_speed="25" -s retraction_amount="6.5" -s retraction_combing="all" -s material_flow_layer_0="100" -s wall_material_flow="100" -s extruder_prime_pos_z="0" -s support_tower_roof_angle="65" -s connect_skin_polygons="False" -s infill_pattern="grid" -s magic_fuzzy_skin_thickness="0.3" -s meshfix_extensive_stitching="False" -s infill_wipe_dist="0.1" -s skirt_brim_material_flow="100" -s bridge_skin_speed="15.0" -s mesh_position_x="0" -s prime_tower_position_y="165.6" -s jerk_wall_x="20" -s support_bottom_extruder_nr="0" -s support_roof_height="1.2" -s cutting_mesh="False" -s machine_max_jerk_xy="20.0" -s support_material_flow="100" -s bridge_fan_speed="100" -s support_line_width="0.4" -s ooze_shield_enabled="False" -s support_extruder_nr="0" -s wall_thickness="0.8" -s support_bottom_distance="0" -s material_crystallinity="False" -s machine_steps_per_mm_e="1600" -s dual="0" -s support_bottom_enable="False" -s wireframe_nozzle_clearance="1" -s speed_infill="60" -s machine_nozzle_id="unknown" -s wipe_brush_pos_x="100" -s acceleration_travel_layer_0="5000.0" -s meshfix_maximum_deviation="0.05" -s cool_fan_enabled="True" -s wall_overhang_angle="90" -s cool_fan_speed_max="100.0" -s raft_surface_layers="2" -s skirt_brim_minimal_length="250" -s material_linear_advance_factor="0" -s cool_min_layer_time="5" -s day="Sat" -s wipe_retraction_enable="True" -s travel_avoid_supports="False" -s acceleration_infill="3000" -s material_bed_temperature="66" -s bridge_skin_material_flow_3="110" -s bridge_fan_speed_2="0" -s initial_bottom_layers="8" -s support_interface_pattern="concentric" -s cross_infill_density_image="" -s adaptive_layer_height_variation="0.1" -s infill_wall_line_count="0" -s support_supported_skin_fan_speed="100" -s extruder_prime_pos_y="0" -s machine_name="Wanhao Duplicator i3 Plus" -s retraction_prime_speed="25" -s material_linear_advance_factor_prime_tower="0" -s z_seam_type="sharpest_corner" -s meshfix_keep_open_polygons="False" -s support_use_towers="True" -s infill_support_enabled="False" -s cool_fan_speed_0="0" -s support_brim_line_count="20" -s blackmagic="0" -s material_print_temp_wait="True" -s support_roof_angles="[ ]" -s infill_mesh_order="0" -s support="0" -s spaghetti_infill_enabled="False" -s acceleration_support="3000" -s support_interface_offset="0.0" -s support_tree_enable="True" -s acceleration_wall_0="3000" -s wireframe_top_jump="0.6" -s jerk_support_bottom="20" -s speed_support_bottom="20.0" -s support_conical_min_width="5.0" -s bottom_layers="8" -s material_flow_dependent_temperature="False" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s support_wall_count="1" -s machine_max_acceleration_z="100" -s skin_edge_support_thickness="0" -s coasting_min_volume="0.8" -s material_linear_advance_factor_wall="0" -s cool_fan_full_at_height="0.3" -s draft_shield_dist="10" -s layer_height="0.1" -s material_break_preparation_retracted_position="-16" -s infill_mesh="False" -s mold_angle="40" -s raft_speed="30.0" -s machine_max_jerk_z="0.4" -s support_tree_angle="40" -s wall_line_width_0="0.4" -s cross_infill_pocket_size="4.0" -s machine_max_jerk_e="5.0" -s raft_margin="15" -s raft_surface_speed="30.0" -s infill_enable_travel_optimization="False" -s machine_height="180" -s travel_retract_before_outer_wall="False" -s infill_support_angle="40" -s adaptive_layer_height_variation_step="0.01" -s raft_surface_jerk="20" -s bridge_sparse_infill_max_density="0" -s wireframe_printspeed_flat="5" -s draft_shield_height_limitation="full" -s magic_fuzzy_skin_enabled="False" -s jerk_enabled="False" -s support_mesh_drop_down="True" -s wireframe_roof_fall_down="2" -s wireframe_strategy="compensate" -s machine_gcode_flavor="RepRap (Marlin/Sprinter)" -s conical_overhang_angle="50" -s infill_overlap_mm="0.04" -s mesh_position_z="0" -s travel_speed="120" -s speed="0" -s small_hole_max_size="0" -s material_bed_temp_prepend="True" -s material="0" -s infill_before_walls="True" -s meshfix_maximum_resolution="0.5" -s wipe_repeat_count="5" -s support_tree_branch_distance="1" -s retraction_speed="25" -s gradual_infill_steps="0" -s machine_show_variants="False" -s support_interface_material_flow="100" -s infill_overlap="10" -s jerk_support="20" -s wall_line_width_x="0.4" -s roofing_extruder_nr="-1" -s raft_base_acceleration="3000" -s wall_extruder_nr="-1" -s adaptive_layer_height_threshold="0.2" -s min_skin_width_for_expansion="4.898587196589413e-17" -s material_no_load_move_factor="0.940860215" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s max_skin_angle_for_expansion="90" -s sub_div_rad_add="0.4" -s support_tree_branch_diameter_angle="5" -s top_bottom_pattern_0="lines" -s alternate_extra_perimeter="False" -s support_roof_enable="True" -s bridge_wall_coast="100" -s raft_interface_fan_speed="0" -s support_offset="0" -s wireframe_fall_down="0.5" -s material_flow="100" -s cross_support_density_image="" -s wireframe_height="3" -s z_seam_relative="False" -s support_tower_maximum_supported_diameter="3.0" -s support_interface_extruder_nr="0" -s nozzle_disallowed_areas="[]" -s support_xy_distance="0.7" -s speed_wall="30.0" -s bridge_enable_more_layers="True" -s conical_overhang_enabled="False" -s speed_travel_layer_0="60.0" -s draft_shield_height="10" -s z_seam_x="100.0" -s retraction_combing_max_distance="0" -s support_infill_rate="0" -s spaghetti_max_infill_angle="10" -s acceleration_support_interface="3000" -s machine_feeder_wheel_diameter="10.0" -s retraction_hop_only_when_collides="False" -s extruder_prime_pos_x="0" -s build_volume_temperature="28" -s layer_start_y="0.0" -s material_break_retracted_position="-50" -s material_initial_print_temperature="200" -s support_infill_extruder_nr="0" -s coasting_speed="90" -s carve_multiple_volumes="False" -s flow_rate_extrusion_offset_factor="100" -s acceleration_wall_x="3000" -s skin_overlap_mm="0.02" -s small_feature_max_length="0.0" -s wall_0_extruder_nr="-1" -s material_maximum_park_duration="300" -s machine_nozzle_temp_enabled="True" -s switch_extruder_retraction_amount="16" -s skirt_brim_speed="30.0" -s wipe_retraction_extra_prime_amount="0" -s ironing_only_highest_layer="False" -s acceleration_topbottom="3000" -s machine_settings="0" -s adhesion_extruder_nr="0" -s mold_width="5" -s jerk_support_infill="20" -s wall_overhang_speed_factor="100" -s jerk_prime_tower="20" -s skin_outline_count="1" -s bridge_skin_speed_2="15.0" -s machine_max_feedrate_y="299792458000" -s support_roof_material_flow="100" -s bridge_skin_density_2="75" -s support_tower_diameter="3.0" -s material_linear_advance_factor_support="0" -s command_line_settings="0" -s brim_replaces_support="True" -s prime_tower_wipe_enabled="True" -s fill_perimeter_gaps="everywhere" -s skin_overlap="5" -s print_sequence="all_at_once" -s acceleration_support_infill="3000" -s brim_gap="0" -s spaghetti_infill_extra_volume="0" -s support_connect_zigzags="True" -s adaptive_layer_height_enabled="False" -s travel_compensate_overlapping_walls_enabled="True" -s roofing_pattern="lines" -s fill_outline_gaps="False" -s support_zag_skip_count="0" -s machine_filament_park_distance="16" -s acceleration_print="3000" -s material_linear_advance_factor_wall_x="0" -s material_final_print_temperature="195" -s ooze_shield_angle="60" -s machine_endstop_positive_direction_x="False" -s travel_compensate_overlapping_walls_x_enabled="True" -s coasting_volume="0.064" -s machine_endstop_positive_direction_z="True" -s small_feature_speed_factor_0="50" -s machine_shape="rectangular" -s machine_heated_bed="True" -s machine_use_extruder_offset_to_offset_coords="True" -s brim_outside_only="True" -s material_standby_temperature="150" -s support_bottom_stair_step_height="0.3" -s speed_roofing="30.0" -s roofing_line_width="0.4" -s material_print_temp_prepend="True" -s wireframe_printspeed_down="5" -s minimum_interface_area="1.0" -s draft_shield_enabled="False" -s speed_support="60" -s adhesion_z_offset="0" -s wireframe_roof_outer_delay="0.2" -s ironing_inset="0.2" -s bridge_fan_speed_3="0" -s initial_layer_line_width_factor="100.0" -s machine_start_gcode="" -s experimental="0" -s bridge_wall_min_length="5" -s prime_tower_position_x="195.6" -s wipe_retraction_amount="6.5" -s material_break_temperature="50" -s top_bottom_extruder_nr="-1" -s acceleration_support_roof="3000" -s support_roof_offset="0.0" -s wall_0_material_flow="100" -s wireframe_flow_flat="100" -s speed_print_layer_0="30.0" -s default_material_bed_temperature="60" -s raft_jerk="20" -s machine_end_gcode="" -s machine_center_is_zero="False" -s support_conical_enabled="False" -s material_anti_ooze_retraction_speed="5" -s machine_head_with_fans_polygon="[[-20, 10], [10, 10], [10, -10], [-20, -10]]" -s z_seam_corner="z_seam_corner_inner" -s support_interface_angles="[ ]" -s bottom_thickness="0.8" -s raft_interface_line_spacing="1.0" -s material_flush_purge_length="60" -s machine_nozzle_heat_up_speed="2.0" -s cool_fan_speed_min="100.0" -s wipe_move_distance="20" -s bridge_skin_speed_3="15.0" -s magic_fuzzy_skin_point_dist="0.8" -s filter_out_tiny_gaps="True" -s spaghetti_flow="20" -s machine_heated_build_volume="False" -s extruder_prime_pos_abs="False" -s material_adhesion_tendency="10" -s infill_sparse_thickness="0.1" -s speed_wall_0="30.0" -s machine_extruders_share_heater="False" -s cool_lift_head="False" -s zig_zaggify_infill="False" -s acceleration_enabled="False" -s support_roof_extruder_nr="0" -s layer_start_x="0.0" -s machine_min_cool_heat_time_window="50.0" -s multiple_mesh_overlap="0.15" -s wipe_retraction_retract_speed="25" -s support_bottom_pattern="concentric" -s material_break_preparation_speed="2" -s acceleration_support_bottom="3000" -s material_end_of_filament_purge_length="20" -s wireframe_roof_drag_along="0.8" -s support_bottom_line_distance="0.4" -s wall_min_flow="0" -s ironing_flow="10.0" -s acceleration_prime_tower="3000" -s retraction_hop_after_extruder_switch_height="1" -s skirt_gap="3" -s speed_ironing="20.0" -s machine_max_acceleration_e="10000" -s line_width="0.4" -s zig_zaggify_support="False" -s wipe_hop_enable="False" -s optimize_wall_printing_order="False" -s raft_interface_line_width="0.8" -s gantry_height="180" -s material_surface_energy="100" -s print_bed_temperature="66" -s magic_mesh_surface_mode="normal" -s raft_fan_speed="0" -s wireframe_up_half_speed="0.3" -s machine_max_feedrate_e="299792458000" -s spaghetti_infill_stepped="True" -s raft_surface_fan_speed="0" -s meshfix_union_all_remove_holes="False" -s speed_wall_x="60.0" -s raft_base_jerk="20" -s machine_extruder_count="1" -s jerk_support_roof="20" -s wireframe_top_delay="0" -s machine_endstop_positive_direction_y="False" -s jerk_topbottom="20" -s remove_empty_first_layers="True" -s support_bottom_height="1" -s raft_acceleration="3000" -s jerk_print_layer_0="20" -s wireframe_roof_inset="3" -s material_anti_ooze_retracted_position="-4" -s expand_skins_expand_distance="0.8" -s bridge_wall_speed="15.0" -s support_bottom_offset="0.0" -s wireframe_flat_delay="0.1" -s machine_nozzle_expansion_angle="45" -s brim_line_count="8" -s support_roof_line_distance="0.4" -s prime_tower_line_width="0.4" -s infill_line_width="0.4" -s magic_fuzzy_skin_outside_only="False" -s speed_equalize_flow_max="150" -s jerk_roofing="20" -s raft_base_line_width="0.8" -s coasting_enable="False" -s support_interface_line_width="0.4" -s support_bottom_angles="[ ]" -s support_skip_zag_per_mm="20" -s support_extruder_nr_layer_0="0" -s meshfix_maximum_travel_resolution="0.8" -s cool_min_speed="10" -s machine_disallowed_areas="[]" -s support_interface_enable="False" -s bridge_skin_density_3="80" -s machine_max_feedrate_z="299792458000" -s support_roof_density="100" -s spaghetti_max_height="2.0" -s skirt_line_count="4" -s retraction_count_max="90" -s retraction_extrusion_window="6.5" -s support_fan_enable="False" -s support_roof_pattern="concentric" -s support_mesh="False" -s wireframe_straight_before_down="20" -s material_print_temperature="210" -s retraction_extra_prime_amount="0" -s wireframe_printspeed="5" -s machine_steps_per_mm_y="50" -s support_tree_branch_diameter="2" -s speed_slowdown_layers="2" -s default_material_print_temperature="210" -s roofing_layer_count="0" -s relative_extrusion="False" -s wall_0_inset="0" -s brim_width="8.0" -s speed_support_infill="60" -s raft_base_line_spacing="1.6" -s max_extrusion_before_wipe="10" -s ironing_pattern="zigzag" -s speed_travel="120" -s support_angle="70" -s raft_base_speed="22.5" -s layer_0_z_overlap="0.15" -s speed_z_hop="10" -s platform_adhesion="0" -s support_bottom_stair_step_width="5.0" -s raft_interface_jerk="20" -s material_shrinkage_percentage="0" -s ironing_line_spacing="0.1" -s skin_line_width="0.4" -s connect_infill_polygons="False" -s wireframe_bottom_delay="0" -s mesh_position_y="0" -s infill_randomize_start_location="False" -s machine_nozzle_head_distance="3" -s support_brim_width="8.0" -s top_layers="8" -s support_infill_sparse_thickness="0.1" -s material_bed_temperature_layer_0="66" -s clean_between_layers="False" -s travel="0" -s material_bed_temp_wait="True" -s raft_airgap="0.3" -s material_flush_purge_speed="0.5" -s support_enable="False" -s prime_tower_enable="False" -s raft_surface_thickness="0.1" -s jerk_skirt_brim="20" -s machine_heat_zone_length="16" -s gradual_infill_step_height="1.5" -s outer_inset_first="False" -s prime_tower_brim_enable="False" -s top_skin_preshrink="0.8" -s top_skin_expand_distance="0.8" -s jerk_print="20" -s mold_roof_height="0.5" -s jerk_ironing="20" -s roofing_angles="[ ]" -s support_top_distance="0.1" -s retraction_hop_after_extruder_switch="True" -s material_linear_advance_factor_skirt_brim="0" -s layer_height_0="0.3" -s switch_extruder_retraction_speeds="20" -s machine_firmware_retract="False" -s meshfix_union_all="True" -s support_z_distance="0.1" -s bridge_settings_enabled="False" -s z_seam_y="190" -s acceleration_layer_0="3000" -s raft_interface_thickness="0.15000000000000002" -s wall_line_count="2" -s magic_fuzzy_skin_point_density="1.25" -s top_bottom_thickness="0.8" -s machine_width="200" -s prime_tower_flow="100" -s acceleration_ironing="3000" -s raft_base_fan_speed="0" -s support_tree_collision_resolution="0.2" -s skin_no_small_gaps_heuristic="False" -s wipe_hop_amount="1" -s support_join_distance="2.0" -s machine_buildplate_type="glass" -s time="09:33:07" -s infill_material_flow="100" -s wireframe_enabled="False" -s material_linear_advance_factor_topbottom="0" -s wipe_retraction_prime_speed="25" -s wipe_pause="0" -s bridge_skin_support_threshold="50" -e0 -s switch_extruder_retraction_speeds="20" -s support_interface_density="100" -s cool_fan_speed="80" -s raft_base_thickness="0.36" -s machine_nozzle_offset_x="0" -s initial_layer_line_width_factor="100.0" -s bridge_skin_material_flow="60" -s material_end_of_filament_purge_speed="0.5" -s retraction_retract_speed="40" -s speed_layer_0="12" -s infill="0" -s small_feature_speed_factor="50" -s support_infill_sparse_thickness="0.1" -s speed_prime_tower="30" -s support_brim_enable="False" -s infill_multiplier="1" -s gradual_support_infill_steps="0" -s infill_sparse_density="64" -s bottom_skin_expand_distance="2.4" -s machine_nozzle_cool_down_speed="2.0" -s infill_offset_x="0" -s limit_support_retractions="True" -s machine_extruder_end_pos_x="0" -s infill_offset_y="0" -s acceleration_print_layer_0="3000" -s wall_min_flow_retract="False" -s speed_support_roof="20.0" -s xy_offset_layer_0="0" -s z_seam_position="back" -s material_guid="0ff92885-617b-4144-a03c-9989872454bc" -s material_linear_advance_factor_support_interface="0" -s material_linear_advance_factor_infill="0" -s material_break_preparation_speed="2" -s acceleration_support_bottom="3000" -s material_end_of_filament_purge_length="20" -s gradual_support_infill_step_height="1" -s support_conical_angle="30" -s raft_surface_acceleration="3000" -s support_roof_pattern="concentric" -s jerk_layer_0="20" -s support_pattern="lines" -s jerk_infill="20" -s speed_equalize_flow_enabled="False" -s top_thickness="0.8" -s bottom_skin_preshrink="2.4" -s raft_surface_line_spacing="0.4" -s skin_edge_support_layers="0" -s wall_line_width="0.4" -s xy_offset="0" -s travel_avoid_other_parts="True" -s raft_interface_speed="11.25" -s travel_avoid_distance="0.625" -s support_interface_height="1" -s wipe_move_distance="20" -s cool_fan_speed_min="80" -s acceleration_skirt_brim="3000" -s meshfix="0" -s support_bottom_material_flow="100" -s acceleration_wall="3000" -s ironing_enabled="False" -s acceleration_travel="5000" -s support_supported_skin_fan_speed="100" -s infill_wall_line_count="0" -s support_wall_count="1" -s skin_edge_support_thickness="0" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s experimental="0" -s support_skip_some_zags="False" -s travel_compensate_overlapping_walls_0_enabled="True" -s support_bottom_line_width="0.4" -s material_flow="100" -s support_offset="0" -s raft_smoothing="5" -s speed_topbottom="15.0" -s wipe_hop_enable="False" -s zig_zaggify_support="False" -s speed_print="30" -s prime_tower_min_volume="6" -s jerk_travel="30" -s material_linear_advance_factor_skirt_brim="0" -s support_tree_branch_diameter="2" -s machine_steps_per_mm_y="50" -s acceleration_support_interface="3000" -s spaghetti_max_infill_angle="10" -s bridge_wall_material_flow="50" -s wipe_hop_speed="10" -s jerk_wall_0="20" -s retraction_hop="1" -s wipe_pause="0" -s wipe_retraction_prime_speed="40" -s minimum_support_area="0.0" -s material_linear_advance_factor_wall_0="0" -s wall_0_wipe_dist="0.2" -s switch_extruder_extra_prime_amount="0" -s support_tower_maximum_supported_diameter="3.0" -s spaghetti_infill_extra_volume="0" -s support_connect_zigzags="True" -s support_xy_distance_overhang="0.2" -s bridge_skin_density_3="80" -s support_interface_enable="False" -s resolution="0" -s support_line_width="0.4" -s material_break_preparation_retracted_position="-16" -s support_xy_overrides_z="z_overrides_xy" -s min_infill_area="0" -s machine_nozzle_tip_outer_diameter="1" -s machine_steps_per_mm_x="50" -s infill_angles="[ ]" -s minimum_interface_area="1.0" -s skirt_brim_line_width="0.4" -s top_bottom_pattern="lines" -s cool_fan_full_layer="2" -s center_object="False" -s spaghetti_inset="0.2" -s gradual_infill_steps="0" -s jerk_travel_layer_0="30.0" -s mold_enabled="False" -s raft_surface_line_width="0.4" -s cooling="0" -s support_tree_collision_resolution="0.2" -s raft_base_fan_speed="0" -s material_print_temperature_layer_0="220" -s raft_interface_line_spacing="1.0" -s machine_nozzle_heat_up_speed="2.0" -s material_flush_purge_length="60" -s bridge_skin_material_flow_2="100" -s speed_support_interface="20.0" -s support_interface_offset="0.0" -s jerk_support="20" -s wall_line_width_x="0.4" -s support_line_distance="0" -s retraction_enable="True" -s switch_extruder_retraction_speed="20" -s retraction_hop_enabled="False" -s acceleration_roofing="3000" -s cool_min_layer_time_fan_speed_max="10" -s wipe_retraction_speed="40" -s retraction_amount="2.5" -s raft_speed="15.0" -s mold_angle="40" -s material_flow_layer_0="100" -s wall_material_flow="100" -s bridge_skin_material_flow_3="110" -s bridge_fan_speed_2="0" -s initial_bottom_layers="6" -s support_interface_pattern="concentric" -s connect_skin_polygons="False" -s infill_pattern="gyroid" -s material_flow_dependent_temperature="False" -s bottom_layers="6" -s magic_fuzzy_skin_thickness="0.3" -s meshfix_extensive_stitching="False" -s infill_wipe_dist="0.1" -s machine_extruder_start_pos_abs="False" -s skirt_brim_material_flow="100" -s bridge_skin_speed="10" -s jerk_wall_x="20" -s wipe_retraction_amount="2.5" -s material_break_temperature="50" -s support_roof_height="1.2" -s magic_fuzzy_skin_enabled="False" -s connect_infill_polygons="False" -s machine_extruder_start_code="" -s support_material_flow="100" -s bridge_fan_speed="100" -s bridge_sparse_infill_max_density="0" -s wall_thickness="0.8" -s support_bottom_distance="0" -s material_crystallinity="False" -s machine_steps_per_mm_e="1600" -s jerk_wall="20" -s dual="0" -s support_bottom_enable="False" -s skin_overlap="5" -s speed_infill="30" -s machine_nozzle_id="unknown" -s wipe_brush_pos_x="100" -s acceleration_travel_layer_0="5000.0" -s raft_surface_layers="2" -s skirt_brim_minimal_length="250" -s material_linear_advance_factor="0" -s cool_min_layer_time="5" -s wipe_retraction_enable="True" -s travel_avoid_supports="False" -s acceleration_infill="3000" -s speed_ironing="10.0" -s support_roof_line_width="0.4" -s extruder_prime_pos_y="0" -s material_linear_advance_factor_prime_tower="0" -s retraction_prime_speed="40" -s z_seam_type="sharpest_corner" -s prime_blob_enable="False" -s meshfix_keep_open_polygons="False" -s raft_surface_speed="15.0" -s infill_enable_travel_optimization="False" -s machine_nozzle_temp_enabled="True" -s switch_extruder_retraction_amount="16" -s skirt_brim_speed="12" -s material_maximum_park_duration="300" -s infill_material_flow="100" -s support_use_towers="True" -s infill_support_enabled="False" -s cool_fan_speed_0="0" -s support_brim_line_count="20" -s blackmagic="0" -s multiple_mesh_overlap="0.15" -s wipe_retraction_retract_speed="40" -s material_linear_advance_factor_wall_x="0" -s acceleration_print="3000" -s support_bottom_pattern="concentric" -s meshfix_maximum_deviation="0.05" -s cool_fan_enabled="True" -s wall_overhang_angle="90" -s cool_fan_speed_max="80" -s machine_extruder_end_code="" -s support_roof_angles="[ ]" -s retraction_hop_after_extruder_switch_height="1" -s machine_extruder_end_pos_abs="False" -s support="0" -s spaghetti_infill_enabled="False" -s acceleration_support="3000" -s acceleration_wall_0="3000" -s jerk_support_bottom="20" -s material_extrusion_cool_down_speed="0.7" -s speed_support_bottom="20.0" -s support_conical_min_width="5.0" -s coasting_min_volume="0.8" -s material_linear_advance_factor_wall="0" -s cool_fan_full_at_height="0.3" -s support_infill_angles="[ ]" -s shell="0" -s support_tower_diameter="3.0" -s machine_extruder_start_pos_x="0" -s wipe_hop_amount="1" -s support_join_distance="2.0" -s support_tree_angle="40" -s fill_perimeter_gaps="everywhere" -s prime_tower_wipe_enabled="True" -s machine_heat_zone_length="16" -s jerk_skirt_brim="20" -s raft_jerk="20" -s speed_print_layer_0="12" -s command_line_settings="0" -s material_linear_advance_factor_support="0" -s conical_overhang_angle="50" -s infill_overlap_mm="0.05600000000000001" -s mesh_position_z="0" -s speed="0" -s material_diameter="1.75" -s meshfix_union_all_remove_holes="False" -s gradual_infill_step_height="1.5" -s cool_lift_head="False" -s speed_wall_0="15.0" -s outer_inset_first="False" -s extruder_prime_pos_z="0" -s support_tower_roof_angle="65" -s meshfix_maximum_resolution="0.5" -s wipe_repeat_count="5" -s support_tree_branch_distance="1" -s wall_x_material_flow="100" -s min_skin_width_for_expansion="3.67394039744206e-17" -s material_no_load_move_factor="0.940860215" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s max_skin_angle_for_expansion="90" -s top_bottom_pattern_0="lines" -s alternate_extra_perimeter="False" -s support_roof_enable="True" -s slicing_tolerance="exclusive" -s machine_extruder_end_pos_y="0" -s cross_support_density_image="" -s z_seam_relative="False" -s support_xy_distance="0.7" -s speed_wall="15.0" -s material_final_print_temperature="205" -s machine_endstop_positive_direction_x="False" -s bridge_enable_more_layers="True" -s conical_overhang_enabled="False" -s speed_travel_layer_0="60.0" -s fill_outline_gaps="False" -s machine_filament_park_distance="16" -s support_zag_skip_count="0" -s material_break_retracted_position="-50" -s material_initial_print_temperature="210" -s switch_extruder_prime_speed="20" -s extruder_prime_pos_x="0" -s layer_start_y="0.0" -s filter_out_tiny_gaps="True" -s bridge_skin_speed_3="10" -s spaghetti_flow="20" -s magic_fuzzy_skin_point_dist="0.8" -s coasting_speed="90" -s skin_material_flow="100" -s support_bottom_density="100" -s acceleration_wall_x="3000" -s skin_overlap_mm="0.02" -s small_feature_max_length="0.0" -s support_initial_layer_line_distance="0" -s support_bottom_offset="0.0" -s bridge_wall_speed="10" -s meshfix_union_all="True" -s support_z_distance="0.1" -s infill_line_distance="0.625" -s minimum_bottom_area="1.0" -s retraction_combing_max_distance="0" -s z_seam_x="100.0" -s expand_skins_expand_distance="2.4" -s mesh_position_x="0" -s wipe_retraction_extra_prime_amount="0" -s jerk_support_roof="20" -s machine_endstop_positive_direction_y="False" -s coasting_volume="0.064" -s machine_endstop_positive_direction_z="True" -s small_feature_speed_factor_0="50" -s infill_support_angle="40" -s raft_surface_jerk="20" -s support_interface_skip_height="0.3" -s mold_width="5" -s infill_before_walls="True" -s material="0" -s jerk_support_infill="20" -s wall_overhang_speed_factor="100" -s jerk_prime_tower="20" -s skin_outline_count="1" -s material_anti_ooze_retraction_speed="5" -s support_conical_enabled="False" -s bridge_skin_speed_2="10" -s retract_at_layer_change="False" -s raft_base_jerk="20" -s speed_wall_x="30.0" -s support_roof_material_flow="100" -s bridge_skin_density_2="75" -s brim_replaces_support="True" -s acceleration_support_infill="3000" -s brim_gap="0" -s travel_compensate_overlapping_walls_enabled="True" -s roofing_pattern="lines" -s travel_compensate_overlapping_walls_x_enabled="True" -s wall_line_width_0="0.4" -s cross_infill_pocket_size="0.625" -s raft_margin="15" -s support_bottom_stair_step_height="0.3" -s brim_outside_only="True" -s material_standby_temperature="175" -s speed_roofing="15.0" -s roofing_line_width="0.4" -s speed_support="30" -s ironing_inset="0.2" -s bridge_fan_speed_3="0" -s support_tree_branch_diameter_angle="5" -s support_infill_rate="0" -s infill_randomize_start_location="False" -s mesh_position_y="0" -s wall_line_count="6" -s magic_fuzzy_skin_point_density="1.25" -s platform_adhesion="0" -s support_bottom_stair_step_width="5.0" -s speed_z_hop="10" -s retraction_speed="40" -s wall_0_material_flow="100" -s cool_min_speed="10" -s bridge_skin_density="100" -s raft_base_line_width="0.8" -s machine_nozzle_offset_y="0" -s extruder_nr="0" -s infill_overlap="14" -s support_interface_material_flow="100" -s magic_mesh_surface_mode="normal" -s raft_fan_speed="0" -s raft_interface_line_width="0.8" -s material_surface_energy="100" -s retraction_extrusion_window="2.5" -s support_fan_enable="False" -s machine_extruder_start_pos_y="0" -s extruder_prime_pos_abs="False" -s material_adhesion_tendency="0" -s infill_sparse_thickness="0.1" -s skin_no_small_gaps_heuristic="False" -s machine_nozzle_head_distance="3" -s support_brim_width="8.0" -s top_layers="6" -s material_break_preparation_temperature="220" -s layer_start_x="0.0" -s machine_min_cool_heat_time_window="50.0" -s support_bottom_line_distance="0.4" -s zig_zaggify_infill="False" -s wall_min_flow="0" -s ironing_flow="10.0" -s support_roof_offset="0.0" -s acceleration_support_roof="3000" -s acceleration_prime_tower="3000" -s skirt_gap="3" -s line_width="0.4" -s optimize_wall_printing_order="False" -s raft_acceleration="3000" -s support_bottom_height="1" -s raft_base_acceleration="3000" -s skirt_line_count="4" -s retraction_count_max="90" -s ironing_only_highest_layer="False" -s acceleration_topbottom="3000" -s machine_settings="0" -s small_hole_max_size="0" -s brim_line_count="8" -s support_roof_line_distance="0.4" -s infill_line_width="0.4" -s magic_fuzzy_skin_outside_only="False" -s prime_tower_line_width="0.4" -s jerk_print_layer_0="20" -s material_anti_ooze_retracted_position="-4" -s support_interface_angles="[ ]" -s bottom_thickness="0.8" -s speed_equalize_flow_max="150" -s jerk_roofing="20" -s minimum_roof_area="1.0" -s machine_extruder_cooling_fan_number="0" -s machine_nozzle_size="0.4" -s raft_interface_jerk="20" -s material_shrinkage_percentage="0" -s support_roof_density="100" -s spaghetti_max_height="2.0" -s bridge_skin_support_threshold="50" -s material_linear_advance_factor_topbottom="0" -s material_print_temperature="220" -s retraction_extra_prime_amount="0" -s default_material_print_temperature="200" -s roofing_layer_count="0" -s wall_0_inset="0" -s brim_width="8.0" -s speed_support_infill="30" -s raft_base_line_spacing="1.6" -s max_extrusion_before_wipe="10" -s roofing_material_flow="100" -s prime_tower_flow="100" -s acceleration_ironing="3000" -s raft_interface_acceleration="3000" -s spaghetti_infill_stepped="True" -s raft_surface_fan_speed="0" -s jerk_print="20" -s z_seam_y="190" -s retraction_min_travel="0.8" -s acceleration_layer_0="3000" -s material_break_speed="25" -s ironing_line_spacing="0.1" -s raft_airgap="0.3" -s material_flush_purge_speed="0.5" -s skin_line_width="0.4" -s machine_steps_per_mm_z="50" -s skin_angles="[ ]" -s skin_preshrink="2.4" -s clean_between_layers="False" -s travel="0" -s raft_surface_thickness="0.1" -s top_skin_preshrink="2.4" -s jerk_support_interface="20" -s cross_infill_density_image="" -s support_interface_line_width="0.4" -s support_skip_zag_per_mm="20" -s support_bottom_angles="[ ]" -s ironing_pattern="zigzag" -s speed_travel="150" -s support_angle="70" -s raft_base_speed="11.25" -s layer_0_z_overlap="0.15" -s top_skin_expand_distance="2.4" -s sub_div_rad_add="0.4" -s z_seam_corner="z_seam_corner_inner" -s roofing_angles="[ ]" -s jerk_ironing="20" -s top_bottom_thickness="0.8" -s support_top_distance="0.1" -s retraction_hop_after_extruder_switch="True" -s jerk_topbottom="20" -s bridge_wall_coast="100" -s raft_interface_fan_speed="0" -s raft_interface_thickness="0.15000000000000002" -s meshfix_maximum_travel_resolution="0.8" -s machine_feeder_wheel_diameter="10.0" -s retraction_hop_only_when_collides="False" -s coasting_enable="False" -s mold_roof_height="0.5" -g -e0 -l "0" -s extruder_nr="0"
2020-02-29 09:33:08,612 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 222 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-02-29 09:33:08,665 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 09:33:08,669 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 09:33:08,676 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [663]: Slicing took 1.096161127090454 seconds
2020-02-29 09:33:08,677 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [664]: Number of models per buildplate: {0: 1}
2020-02-29 09:33:08,677 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [678]: See if there is more to slice...
2020-02-29 09:33:08,893 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [181]: Socket state changed to Closing
2020-02-29 09:33:08,896 - DEBUG - [MainThread] UM.Backend.Backend._onSocketError [203]: Socket debug: Arcus Error (13): Closing socket because other side requested close.
2020-02-29 09:33:08,899 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [183]: Socket state changed to Closed
2020-02-29 09:33:08,900 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onBackendQuit [829]: Backend quit with return code 0. Resetting process and socket.
2020-02-29 09:33:21,987 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-02-29 09:35:51,275 - DEBUG - [MainThread] LinearAdvanceSettingPlugin.LinearAdvanceSettingPlugin._filterGcode [109]: No used extruders specify a linear advance factor
2020-02-29 09:35:51,509 - DEBUG - [MainThread] UM.Controller.setActiveStage [149]: Setting active stage to MonitorStage
2020-02-29 09:35:51,621 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:211: Error: Cannot assign [undefined] to QString
2020-02-29 09:35:51,660 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._processRequest [308]: Request [f69e008f76ab440d9b0daa20e8bd86e4] started
2020-02-29 09:35:51,663 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-02-29 09:35:51,903 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-02-29 09:35:52,152 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestFinished [369]: Request [f69e008f76ab440d9b0daa20e8bd86e4] finished.
2020-02-29 09:35:52,155 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-02-29 09:35:52,164 - INFO - [MainThread] SliceInfoPlugin.SliceInfo._onRequestFinished [275]: SliceInfo sent successfully
2020-02-29 09:36:01,995 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-02-29 09:36:21,990 - DEBUG - [MainThread] UM.Message._onInactivityTriggered [88]: Hiding message because of inactivity
2020-02-29 09:36:29,737 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [772]: Resource created on OctoPrint instance: http://192.168.2.156/api/files/local/WDI3P_JST_Join_Jig.gcode
2020-02-29 09:36:59,994 - DEBUG - [MainThread] UM.Message._onInactivityTriggered [88]: Hiding message because of inactivity
2020-02-29 09:42:01,277 - DEBUG - [MainThread] UM.Controller.setActiveStage [149]: Setting active stage to PrepareStage
2020-02-29 09:42:01,307 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-02-29 09:42:01,386 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 09:42:01,389 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 09:42:01,398 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/plugins/plugins/PrepareStage/PrepareMain.qml:16:5: QML ActionPanelWidget: Binding loop detected for property "width"
2020-02-29 09:42:01,420 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:79: ReferenceError: stop is not defined
2020-02-29 09:42:01,423 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:63: TypeError: Cannot read property of null
2020-02-29 09:42:01,426 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:91: TypeError: Cannot read property of null
2020-02-29 09:42:01,428 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:102: TypeError: Cannot read property of null
2020-02-29 09:42:01,431 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:103: TypeError: Cannot read property of null
2020-02-29 09:42:01,433 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:139: TypeError: Cannot read property of null
2020-02-29 09:42:01,435 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:140: TypeError: Cannot read property of null
2020-02-29 09:42:01,439 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:120: TypeError: Cannot read property of null
2020-02-29 09:42:01,441 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:122: TypeError: Cannot read property of null
2020-02-29 09:42:01,443 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-02-29 09:42:01,446 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:36: TypeError: Cannot read property of null
2020-02-29 09:42:01,448 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:37: TypeError: Cannot read property of null
2020-02-29 09:42:01,451 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:49: TypeError: Cannot read property of null
2020-02-29 09:42:01,453 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:59: TypeError: Cannot read property of null
2020-02-29 09:42:01,456 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:61: TypeError: Cannot read property of null
2020-02-29 09:42:01,459 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:63: TypeError: Cannot read property of null
2020-02-29 09:42:01,462 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ExtruderBox.qml:20: TypeError: Cannot read property of null
2020-02-29 09:42:01,464 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:29: TypeError: Cannot read property of null
2020-02-29 09:42:01,466 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:30: TypeError: Cannot read property of null
2020-02-29 09:42:01,469 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:40: TypeError: Cannot read property of null
2020-02-29 09:42:01,471 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:73: TypeError: Cannot read property of null
2020-02-29 09:42:01,473 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:135: TypeError: Cannot read property of null
2020-02-29 09:42:01,476 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:246: TypeError: Cannot read property of null
2020-02-29 09:42:01,478 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:247: TypeError: Cannot read property of null
2020-02-29 09:42:01,481 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:173: TypeError: Cannot read property of null
2020-02-29 09:42:01,484 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:175: TypeError: Cannot read property of null
2020-02-29 09:42:01,486 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:190: TypeError: Cannot read property of null
2020-02-29 09:42:01,488 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:193: TypeError: Cannot read property of null
2020-02-29 09:42:01,491 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:60: TypeError: Cannot read property of null
2020-02-29 09:42:01,494 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:248: TypeError: Cannot read property of null
2020-02-29 09:42:01,496 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:294: TypeError: Cannot read property of null
2020-02-29 09:42:01,498 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:26: TypeError: Cannot read property of null
2020-02-29 09:42:01,501 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:27: TypeError: Cannot read property of null
2020-02-29 09:42:01,507 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:388: TypeError: Cannot read property of null
2020-02-29 09:42:01,509 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:390: TypeError: Cannot read property of null
2020-02-29 09:42:01,511 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:391: TypeError: Cannot read property of null
2020-02-29 09:42:01,514 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:26: TypeError: Cannot read property of null
2020-02-29 09:42:01,516 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:27: TypeError: Cannot read property of null
2020-02-29 09:42:01,519 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:24: TypeError: Cannot read property of null
2020-02-29 09:42:01,522 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:30: TypeError: Cannot read property of null
2020-02-29 09:42:01,524 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:39: TypeError: Cannot read property of null
2020-02-29 09:42:01,527 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:24: TypeError: Cannot read property of null
2020-02-29 09:42:01,529 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:30: TypeError: Cannot read property of null
2020-02-29 09:42:01,532 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:39: TypeError: Cannot read property of null
2020-02-29 09:42:01,534 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:24: TypeError: Cannot read property of null
2020-02-29 09:42:01,537 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:30: TypeError: Cannot read property of null
2020-02-29 09:42:01,539 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:39: TypeError: Cannot read property of null
2020-02-29 09:42:01,542 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupTooltip.qml:67: TypeError: Cannot read property of null
2020-02-29 09:42:01,544 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupTooltip.qml:69: TypeError: Cannot read property of null
2020-02-29 09:42:01,547 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupTooltip.qml:71: TypeError: Cannot read property of null
2020-02-29 09:42:01,549 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:150: TypeError: Cannot read property of null
2020-02-29 09:42:01,552 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-02-29 09:42:01,555 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:166: TypeError: Cannot read property of null
2020-02-29 09:42:01,557 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:167: TypeError: Cannot read property of null
2020-02-29 09:42:01,560 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:178: TypeError: Cannot read property of null
2020-02-29 09:42:01,563 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:231: TypeError: Cannot read property of null
2020-02-29 09:42:01,566 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:241: TypeError: Cannot read property of null
2020-02-29 09:42:10,999 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-02-29 10:48:05,492 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Orange Leader"._octoprint._tcp.local
2020-02-29 10:48:05,494 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Blue Leader"._octoprint._tcp.local
2020-02-29 10:48:05,495 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Darth Pooky"._octoprint._tcp.local
2020-02-29 10:58:46,897 - INFO - [MainThread] UM.Controller.deleteAllNodesWithMeshData [386]: Clearing scene
2020-02-29 10:58:46,933 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 10:58:46,937 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 10:58:46,955 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: GroupedOp.(#=1) <UM.Operations.RemoveSceneNodeOperation.RemoveSceneNodeOperation object at 0x60001472c8d8>, took 9ms
2020-02-29 10:58:46,960 - INFO - [MainThread] cura.CuraApplication._removeNodesWithLayerData [1900]: Clearing scene
2020-02-29 10:58:47,700 - WARNING - [MainThread] cura.UI.PrintInformation.setBaseName [360]: Unsupported Mime Type Database file extension 
2020-02-29 10:59:04,184 - INFO - [MainThread] cura.UI.MachineActionManager.addDefaultMachineActions [72]: Default machine actions added for machine definition [monoprice_select_mini_v2]
2020-02-29 10:59:04,313 - INFO - [MainThread] cura.Settings.GlobalStack.addExtruder [184]: Extruder[monoprice_select_mini_v2_extruder_0 #2] added to [Monoprice Select Mini V2 (E3D)] at position [0]
2020-02-29 10:59:04,316 - WARNING - [MainThread] cura.Settings.ExtruderManager.registerExtruder [156]: Extruder [monoprice_select_mini_v2_extruder_0 #2] has already been registered on machine [Monoprice Select Mini V2 (E3D)], not doing anything
2020-02-29 10:59:04,320 - INFO - [MainThread] UM.Logger.info [112]: Initializing Active Machine...
2020-02-29 10:59:04,352 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-02-29 10:59:04,356 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [303]: Connection with instance R2D2 with url http://192.168.2.171:5001/ started
2020-02-29 10:59:04,376 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/SettingsMenu.qml:51: TypeError: Cannot read property 'isEnabled' of undefined
2020-02-29 10:59:04,378 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/SettingsMenu.qml:44: TypeError: Cannot read property 'isEnabled' of undefined
2020-02-29 10:59:04,382 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/MaterialMenu.qml:26: TypeError: Cannot read property 'isEnabled' of undefined
2020-02-29 10:59:04,385 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/MaterialMenu.qml:28: TypeError: Cannot read property 'material' of undefined
2020-02-29 10:59:04,388 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-02-29 10:59:04,481 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-02-29 10:59:04,499 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-02-29 10:59:04,502 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-02-29 10:59:04,513 - INFO - [Thread-6] STLReader.STLReader.load_file [51]: Using NumPy-STL to load STL data.
2020-02-29 10:59:04,519 - DEBUG - [Thread-6] UM.Mesh.MeshData.calculateNormalsFromVertices [495]: Calculating normals took 0.0004949569702148438 seconds
2020-02-29 10:59:04,520 - DEBUG - [Thread-6] STLReader.STLReader._read [102]: Loaded a mesh with 1746 vertices
2020-02-29 10:59:04,541 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device R2D2 already added
2020-02-29 10:59:04,550 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [741]: Set OctoPrint camera url to http://octolinux.local:8080/?action=stream
2020-02-29 10:59:04,583 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [135]: New error check scheduled.
2020-02-29 10:59:05,355 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-02-29 10:59:05,367 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [63]: Updating QualityProfilesDropDownMenuModel.
2020-02-29 10:59:05,591 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-02-29 10:59:05,594 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [63]: Updating QualityProfilesDropDownMenuModel.
2020-02-29 10:59:05,919 - INFO - [MainThread] cura.Machines.MachineErrorChecker._setResult [187]: Error check finished, result = False, time = 1.3s
2020-02-29 10:59:08,601 - INFO - [Thread-7] STLReader.STLReader.load_file [51]: Using NumPy-STL to load STL data.
2020-02-29 10:59:08,611 - DEBUG - [Thread-7] UM.Mesh.MeshData.calculateNormalsFromVertices [495]: Calculating normals took 0.0008130073547363281 seconds
2020-02-29 10:59:08,612 - DEBUG - [Thread-7] STLReader.STLReader._read [102]: Loaded a mesh with 30078 vertices
2020-02-29 10:59:08,624 - DEBUG - [Thread-7] UM.Mesh.MeshData.approximateConvexHull [452]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.007005929946899414 seconds. 96 input vertices. 96 output vertices.
2020-02-29 10:59:08,636 - DEBUG - [Thread-7] UM.FileHandler.ReadFileJob.run [71]: Loading file took 0.0 seconds
2020-02-29 10:59:08,648 - DEBUG - [Thread-7] UM.Mesh.MeshData.approximateConvexHull [452]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.007650852203369141 seconds. 96 input vertices. 96 output vertices.
2020-02-29 10:59:08,678 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: <UM.Operations.AddSceneNodeOperation.AddSceneNodeOperation object at 0x600014760318>, took 5ms
2020-02-29 10:59:11,200 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._terminate [292]: Attempting to kill the engine process
2020-02-29 10:59:11,203 - DEBUG - [MainThread] UM.Backend.Backend._createSocket [213]: Previous socket existed. Closing that first.
2020-02-29 10:59:11,212 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [173]: Socket state changed to Listening
2020-02-29 10:59:11,240 - INFO - [MainThread] UM.Backend.Backend.startEngine [81]: Started engine process: /Applications/Ultimaker Cura 3.app/Contents/MacOS/CuraEngine
2020-02-29 10:59:11,243 - DEBUG - [MainThread] UM.Backend.Backend._backendLog [101]: [Backend] Calling engine with: ['/Applications/Ultimaker Cura 3.app/Contents/MacOS/CuraEngine', 'connect', '127.0.0.1:49674', '']
2020-02-29 10:59:11,247 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-02-29 10:59:11,250 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [177]: Socket state changed to Connected
2020-02-29 10:59:11,251 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] Cura_SteamEngine version 4.5.0
2020-02-29 10:59:11,255 - DEBUG - [MainThread] UM.Backend.Backend._onSocketStateChanged [167]: Backend connected on port 49674
2020-02-29 10:59:11,256 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] Copyright (C) 2019 Ultimaker
2020-02-29 10:59:11,260 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-02-29 10:59:11,263 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] This program is free software: you can redistribute it and/or modify
2020-02-29 10:59:11,268 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] it under the terms of the GNU Affero General Public License as published by
2020-02-29 10:59:11,272 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] the Free Software Foundation, either version 3 of the License, or
2020-02-29 10:59:11,275 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] (at your option) any later version.
2020-02-29 10:59:11,278 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-02-29 10:59:11,281 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] This program is distributed in the hope that it will be useful,
2020-02-29 10:59:11,285 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] but WITHOUT ANY WARRANTY; without even the implied warranty of
2020-02-29 10:59:11,290 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
2020-02-29 10:59:11,293 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] GNU Affero General Public License for more details.
2020-02-29 10:59:11,296 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-02-29 10:59:11,301 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] You should have received a copy of the GNU Affero General Public License
2020-02-29 10:59:11,304 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] along with this program.  If not, see <http://www.gnu.org/licenses/>.
2020-02-29 10:59:11,362 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'Tweezer_Holder_11mm_Hole 1.0.stl'>,rot.=Q<0.13052619222005157,0.0,0.0,w=0.9914448613738104>), took 3ms
2020-02-29 10:59:11,466 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'Tweezer_Holder_11mm_Hole 1.0.stl'>,rot.=Q<0.13052619222005157,0.0,0.0,w=0.9914448613738104>), took 3ms
2020-02-29 10:59:11,600 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'Tweezer_Holder_11mm_Hole 1.0.stl'>,rot.=Q<0.13052619222005157,0.0,0.0,w=0.9914448613738104>), took 3ms
2020-02-29 10:59:11,701 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'Tweezer_Holder_11mm_Hole 1.0.stl'>,rot.=Q<0.13052619222005157,0.0,0.0,w=0.9914448613738104>), took 3ms
2020-02-29 10:59:11,866 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'Tweezer_Holder_11mm_Hole 1.0.stl'>,rot.=Q<0.13052619222005157,0.0,0.0,w=0.9914448613738104>), took 3ms
2020-02-29 10:59:11,968 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'Tweezer_Holder_11mm_Hole 1.0.stl'>,rot.=Q<0.13052619222005157,0.0,0.0,w=0.9914448613738104>), took 2ms
2020-02-29 10:59:12,737 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: PlatformPhysicsOp.(trans.=<0.0,7.32,0.0>), took 1ms
2020-02-29 10:59:18,573 - DEBUG - [Thread-8] UM.Operations.OperationStack.push [67]: GroupedOp.(#=1) TranslateOp.(node=<CuraSceneNode object: 'Tweezer_Holder_11mm_Hole 1.0.stl'>,trans.=<0.0,46.3,0.0>), took 0ms
2020-02-29 10:59:19,085 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-02-29 10:59:23,299 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'Tweezer_Holder_11mm_Hole 1.0.stl'>,rot.=Q<0.0,0.13052619222005157,0.0,w=0.9914448613738104>), took 2ms
2020-02-29 10:59:23,400 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'Tweezer_Holder_11mm_Hole 1.0.stl'>,rot.=Q<0.0,0.13052619222005157,0.0,w=0.9914448613738104>), took 3ms
2020-02-29 10:59:23,500 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'Tweezer_Holder_11mm_Hole 1.0.stl'>,rot.=Q<0.0,0.13052619222005157,0.0,w=0.9914448613738104>), took 2ms
2020-02-29 10:59:23,609 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'Tweezer_Holder_11mm_Hole 1.0.stl'>,rot.=Q<0.0,0.13052619222005157,0.0,w=0.9914448613738104>), took 2ms
2020-02-29 10:59:23,728 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'Tweezer_Holder_11mm_Hole 1.0.stl'>,rot.=Q<0.0,0.13052619222005157,0.0,w=0.9914448613738104>), took 3ms
2020-02-29 10:59:23,950 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'Tweezer_Holder_11mm_Hole 1.0.stl'>,rot.=Q<0.0,0.13052619222005157,0.0,w=0.9914448613738104>), took 2ms
2020-02-29 10:59:30,684 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [225]: Starting to slice...
2020-02-29 10:59:30,684 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [243]: Going to slice build plate [0]!
2020-02-29 10:59:30,693 - WARNING - [Thread-1] UM.Decorators.deprecated_function [20]: <function GlobalStack.extruders at 0x600006f04c78> is deprecated (since 4.4): Please use extruderList instead.
2020-02-29 10:59:31,033 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onStartSliceCompleted [429]: Sending slice message took 0.34859585762023926 seconds
2020-02-29 10:59:31,296 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING]  -s extruders_enabled_count="1" -s support_interface_density="100" -s cool_fan_speed="100.0" -s raft_base_thickness="0.30625" -s bridge_skin_material_flow="60" -s slicing_tolerance="middle" -s material_end_of_filament_purge_speed="0.5" -s prime_tower_size="20" -s retraction_retract_speed="40" -s speed_layer_0="30" -s infill="0" -s small_feature_speed_factor="50" -s speed_prime_tower="50" -s support_brim_enable="False" -s infill_multiplier="1" -s gradual_support_infill_steps="0" -s initial_extruder_nr="0" -s infill_extruder_nr="-1" -s infill_sparse_density="22" -s bottom_skin_expand_distance="1.0499999999999998" -s machine_nozzle_cool_down_speed="2.0" -s infill_offset_x="0" -s machine_depth="120" -s adhesion_z_offset_extensive_processing="False" -s limit_support_retractions="True" -s machine_max_acceleration_y="800" -s infill_offset_y="0" -s acceleration_print_layer_0="3000" -s wall_min_flow_retract="False" -s speed_support_roof="25.0" -s xy_offset_layer_0="0" -s adhesion_type="skirt" -s z_seam_position="back" -s material_guid="" -s magic_spiralize="False" -s material_linear_advance_factor_support_interface="0" -s machine_max_acceleration_x="800" -s material_linear_advance_factor_infill="0" -s print_temperature="210" -s skin_angles="[ ]" -s gradual_support_infill_step_height="1" -s support_conical_angle="30" -s raft_surface_acceleration="3000" -s jerk_layer_0="20" -s machine_max_feedrate_x="150" -s support_pattern="zigzag" -s jerk_infill="20" -s speed_equalize_flow_enabled="False" -s top_thickness="0.72" -s bottom_skin_preshrink="1.0499999999999998" -s raft_surface_line_spacing="0.35" -s wall_line_width="0.35" -s xy_offset="0" -s alternate_carve_order="True" -s travel_avoid_other_parts="True" -s raft_interface_speed="18.75" -s travel_avoid_distance="0.625" -s support_interface_height="1" -s jerk_travel_layer_0="30.0" -s date="29-02-2020" -s wireframe_flow="100" -s machine_acceleration="4000" -s machine_minimum_feedrate="0.0" -s skin_preshrink="1.0499999999999998" -s jerk_wall="20" -s retract_at_layer_change="False" -s jerk_travel="30" -s support_skip_some_zags="False" -s minimum_roof_area="1.0" -s wireframe_flow_connection="100" -s bridge_skin_density="100" -s skirt_brim_line_width="0.35" -s top_bottom_pattern="lines" -s travel_compensate_overlapping_walls_0_enabled="True" -s flow_rate_max_extrusion_offset="0" -s material_diameter="2.85" -s support_bottom_line_width="0.35" -s raft_smoothing="5" -s speed_topbottom="20" -s wireframe_drag_along="0.6" -s material_break_speed="25" -s raft_interface_acceleration="3000" -s minimum_polygon_circumference="1.0" -s support_interface_skip_height="0.3" -s speed_print="50" -s skin_edge_support_layers="0" -s support_type="everywhere" -s support_roof_line_width="0.35" -s wireframe_printspeed_bottom="5" -s raft_surface_line_width="0.35" -s prime_tower_min_volume="6" -s prime_blob_enable="False" -s switch_extruder_prime_speed="20" -s wall_x_extruder_nr="-1" -s machine_steps_per_mm_z="50" -s smooth_spiralized_contours="True" -s ooze_shield_dist="2" -s bridge_wall_material_flow="50" -s cool_fan_full_layer="2" -s roofing_material_flow="100" -s wipe_hop_speed="10" -s infill_angles="[ ]" -s infill_line_distance="3.1818181818181817" -s minimum_bottom_area="1.0" -s minimum_support_area="0.0" -s material_linear_advance_factor_wall_0="0" -s wall_0_wipe_dist="0.2" -s switch_extruder_extra_prime_amount="0" -s material_extrusion_cool_down_speed="0.7" -s wall_x_material_flow="100" -s support_xy_distance_overhang="0.2" -s wireframe_printspeed_up="5" -s resolution="0" -s retraction_hop="1" -s jerk_wall_0="20" -s skin_material_flow="100" -s support_bottom_density="100" -s jerk_support_interface="20" -s material_print_temperature_layer_0="215" -s retraction_min_travel="0.7" -s support_xy_overrides_z="z_overrides_xy" -s min_infill_area="0" -s machine_nozzle_tip_outer_diameter="1" -s machine_steps_per_mm_x="50" -s material_break_preparation_temperature="210" -s machine_nozzle_size="0.4" -s support_initial_layer_line_distance="2.3333333333333335" -s center_object="False" -s spaghetti_inset="0.2" -s mold_enabled="False" -s acceleration_travel="5000" -s acceleration_wall="3000" -s support_bottom_material_flow="100" -s ironing_enabled="False" -s cooling="0" -s support_infill_angles="[ ]" -s shell="0" -s bridge_skin_material_flow_2="100" -s speed_support_interface="25.0" -s meshfix="0" -s acceleration_skirt_brim="3000" -s support_line_distance="2.3333333333333335" -s retraction_enable="True" -s retraction_hop_enabled="False" -s switch_extruder_retraction_speed="20" -s acceleration_roofing="3000" -s anti_overhang_mesh="False" -s cool_min_layer_time_fan_speed_max="10" -s wipe_retraction_speed="40" -s retraction_amount="2.5" -s retraction_combing="noskin" -s material_flow_layer_0="100" -s wall_material_flow="100" -s extruder_prime_pos_z="0" -s support_tower_roof_angle="65" -s connect_skin_polygons="False" -s infill_pattern="grid" -s magic_fuzzy_skin_thickness="0.3" -s meshfix_extensive_stitching="False" -s infill_wipe_dist="0.0875" -s skirt_brim_material_flow="100" -s bridge_skin_speed="10" -s mesh_position_x="0" -s prime_tower_position_y="95.65" -s jerk_wall_x="20" -s support_bottom_extruder_nr="0" -s support_roof_height="1" -s cutting_mesh="False" -s machine_max_jerk_xy="20" -s support_material_flow="100" -s bridge_fan_speed="100" -s support_line_width="0.35" -s ooze_shield_enabled="False" -s support_extruder_nr="0" -s wall_thickness="1.05" -s support_bottom_distance="0.1" -s material_crystallinity="False" -s machine_steps_per_mm_e="1600" -s dual="0" -s support_bottom_enable="False" -s wireframe_nozzle_clearance="1" -s speed_infill="50" -s machine_nozzle_id="unknown" -s wipe_brush_pos_x="100" -s acceleration_travel_layer_0="5000.0" -s meshfix_maximum_deviation="0.05" -s cool_fan_enabled="True" -s wall_overhang_angle="90" -s cool_fan_speed_max="100.0" -s raft_surface_layers="1" -s skirt_brim_minimal_length="250" -s material_linear_advance_factor="0" -s cool_min_layer_time="5" -s day="Sat" -s wipe_retraction_enable="True" -s travel_avoid_supports="False" -s acceleration_infill="3000" -s material_bed_temperature="60" -s bridge_skin_material_flow_3="110" -s bridge_fan_speed_2="0" -s initial_bottom_layers="6" -s support_interface_pattern="concentric" -s cross_infill_density_image="" -s adaptive_layer_height_variation="0.1" -s infill_wall_line_count="0" -s support_supported_skin_fan_speed="100" -s extruder_prime_pos_y="0" -s machine_name="Monoprice Select Mini V2" -s retraction_prime_speed="40" -s material_linear_advance_factor_prime_tower="0" -s z_seam_type="sharpest_corner" -s meshfix_keep_open_polygons="False" -s support_use_towers="True" -s infill_support_enabled="False" -s cool_fan_speed_0="0" -s support_brim_line_count="23" -s blackmagic="0" -s material_print_temp_wait="True" -s support_roof_angles="[ ]" -s infill_mesh_order="0" -s support="0" -s spaghetti_infill_enabled="False" -s acceleration_support="3000" -s support_interface_offset="0.0" -s support_tree_enable="False" -s acceleration_wall_0="3000" -s wireframe_top_jump="0.6" -s jerk_support_bottom="20" -s speed_support_bottom="25.0" -s support_conical_min_width="5.0" -s bottom_layers="6" -s material_flow_dependent_temperature="False" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s support_wall_count="0" -s machine_max_acceleration_z="20" -s skin_edge_support_thickness="0" -s coasting_min_volume="0.8" -s material_linear_advance_factor_wall="0" -s cool_fan_full_at_height="0.2625" -s draft_shield_dist="10" -s layer_height="0.13125" -s material_break_preparation_retracted_position="-16" -s infill_mesh="False" -s mold_angle="40" -s raft_speed="25.0" -s machine_max_jerk_z="0.4" -s support_tree_angle="40" -s wall_line_width_0="0.35" -s cross_infill_pocket_size="3.1818181818181817" -s machine_max_jerk_e="5" -s raft_margin="5" -s raft_surface_speed="25.0" -s infill_enable_travel_optimization="False" -s machine_height="120" -s travel_retract_before_outer_wall="False" -s infill_support_angle="40" -s adaptive_layer_height_variation_step="0.01" -s raft_surface_jerk="20" -s bridge_sparse_infill_max_density="0" -s wireframe_printspeed_flat="5" -s draft_shield_height_limitation="full" -s magic_fuzzy_skin_enabled="False" -s jerk_enabled="False" -s support_mesh_drop_down="True" -s wireframe_roof_fall_down="2" -s wireframe_strategy="compensate" -s machine_gcode_flavor="RepRap (Marlin/Sprinter)" -s conical_overhang_angle="50" -s infill_overlap_mm="0.035" -s mesh_position_z="0" -s travel_speed="120" -s speed="0" -s small_hole_max_size="0" -s material_bed_temp_prepend="True" -s material="0" -s infill_before_walls="True" -s meshfix_maximum_resolution="0.5" -s wipe_repeat_count="5" -s support_tree_branch_distance="1" -s retraction_speed="40" -s gradual_infill_steps="0" -s machine_show_variants="True" -s support_interface_material_flow="100" -s infill_overlap="10" -s jerk_support="20" -s wall_line_width_x="0.35" -s roofing_extruder_nr="-1" -s raft_base_acceleration="3000" -s wall_extruder_nr="-1" -s adaptive_layer_height_threshold="0.2" -s min_skin_width_for_expansion="4.8220467716427034e-17" -s material_no_load_move_factor="0.940860215" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s max_skin_angle_for_expansion="90" -s sub_div_rad_add="0.35" -s support_tree_branch_diameter_angle="5" -s top_bottom_pattern_0="lines" -s alternate_extra_perimeter="False" -s support_roof_enable="False" -s bridge_wall_coast="100" -s raft_interface_fan_speed="0" -s support_offset="0" -s wireframe_fall_down="0.5" -s material_flow="100" -s cross_support_density_image="" -s wireframe_height="3" -s z_seam_relative="False" -s support_tower_maximum_supported_diameter="3.0" -s support_interface_extruder_nr="0" -s nozzle_disallowed_areas="[]" -s support_xy_distance="0.7" -s speed_wall="25.0" -s bridge_enable_more_layers="True" -s conical_overhang_enabled="False" -s speed_travel_layer_0="72.0" -s draft_shield_height="10" -s z_seam_x="60.0" -s retraction_combing_max_distance="0" -s support_infill_rate="15" -s spaghetti_max_infill_angle="10" -s acceleration_support_interface="3000" -s machine_feeder_wheel_diameter="10.0" -s retraction_hop_only_when_collides="False" -s extruder_prime_pos_x="0" -s build_volume_temperature="28" -s layer_start_y="0.0" -s material_break_retracted_position="-50" -s material_initial_print_temperature="200" -s support_infill_extruder_nr="0" -s coasting_speed="90" -s carve_multiple_volumes="False" -s flow_rate_extrusion_offset_factor="100" -s acceleration_wall_x="3000" -s skin_overlap_mm="0.0175" -s small_feature_max_length="0.0" -s wall_0_extruder_nr="-1" -s material_maximum_park_duration="300" -s machine_nozzle_temp_enabled="True" -s switch_extruder_retraction_amount="16" -s skirt_brim_speed="30" -s wipe_retraction_extra_prime_amount="0" -s ironing_only_highest_layer="False" -s acceleration_topbottom="3000" -s machine_settings="0" -s adhesion_extruder_nr="0" -s mold_width="5" -s jerk_support_infill="20" -s wall_overhang_speed_factor="100" -s jerk_prime_tower="20" -s skin_outline_count="1" -s bridge_skin_speed_2="10" -s machine_max_feedrate_y="150" -s support_roof_material_flow="100" -s bridge_skin_density_2="75" -s support_tower_diameter="3.0" -s material_linear_advance_factor_support="0" -s command_line_settings="0" -s brim_replaces_support="True" -s prime_tower_wipe_enabled="True" -s fill_perimeter_gaps="everywhere" -s skin_overlap="5" -s print_sequence="all_at_once" -s acceleration_support_infill="3000" -s brim_gap="0" -s spaghetti_infill_extra_volume="0" -s support_connect_zigzags="True" -s adaptive_layer_height_enabled="False" -s travel_compensate_overlapping_walls_enabled="True" -s roofing_pattern="lines" -s fill_outline_gaps="False" -s support_zag_skip_count="9" -s machine_filament_park_distance="16" -s acceleration_print="3000" -s material_linear_advance_factor_wall_x="0" -s material_final_print_temperature="195" -s ooze_shield_angle="60" -s machine_endstop_positive_direction_x="False" -s travel_compensate_overlapping_walls_x_enabled="True" -s coasting_volume="0.064" -s machine_endstop_positive_direction_z="True" -s small_feature_speed_factor_0="50" -s machine_shape="rectangular" -s machine_heated_bed="True" -s machine_use_extruder_offset_to_offset_coords="True" -s brim_outside_only="True" -s material_standby_temperature="150" -s support_bottom_stair_step_height="0.3" -s speed_roofing="20" -s roofing_line_width="0.35" -s material_print_temp_prepend="True" -s wireframe_printspeed_down="5" -s minimum_interface_area="1.0" -s draft_shield_enabled="False" -s speed_support="37.5" -s adhesion_z_offset="0" -s wireframe_roof_outer_delay="0.2" -s ironing_inset="0.175" -s bridge_fan_speed_3="0" -s initial_layer_line_width_factor="100.0" -s machine_start_gcode="G21;(metric values)
2020-02-29 10:59:31,299 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] G90;(absolute positioning)
2020-02-29 10:59:31,301 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] M82;(set extruder to absolute mode)
2020-02-29 10:59:31,304 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] M107;(start with the fan off)
2020-02-29 10:59:31,306 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] G28;(Home the printer)
2020-02-29 10:59:31,308 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] G92 E0;(Reset the extruder to 0)
2020-02-29 10:59:31,311 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] G0 Z5 E5 F500;(Move up and prime the nozzle)
2020-02-29 10:59:31,313 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] G0 X-1 Z0;(Move outside the printable area)
2020-02-29 10:59:31,316 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] G1 Y60 E8 F500;(Draw a priming/wiping line to the rear)
2020-02-29 10:59:31,318 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] G1 X-1;(Move a little closer to the print area)
2020-02-29 10:59:31,321 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] G1 Y10 E16 F500;(draw more priming/wiping)
2020-02-29 10:59:31,323 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] G1 E15 F250;(Small retract)
2020-02-29 10:59:31,326 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] G92 E0;(Zero the extruder)" -s experimental="0" -s bridge_wall_min_length="5" -s prime_tower_position_x="115.65" -s wipe_retraction_amount="2.5" -s material_break_temperature="50" -s top_bottom_extruder_nr="-1" -s acceleration_support_roof="3000" -s support_roof_offset="0.0" -s wall_0_material_flow="100" -s wireframe_flow_flat="100" -s speed_print_layer_0="30" -s default_material_bed_temperature="60" -s raft_jerk="20" -s machine_end_gcode="G0 X0 Y120;(Stick out the part)
2020-02-29 10:59:31,328 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] M190 S0;(Turn off heat bed, don't wait.)
2020-02-29 10:59:31,331 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] G92 E10;(Set extruder to 10)
2020-02-29 10:59:31,333 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] G1 E7 F200;(retract 3mm)
2020-02-29 10:59:31,335 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] M104 S0;(Turn off nozzle, don't wait)
2020-02-29 10:59:31,338 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] G4 S300;(Delay 5 minutes)
2020-02-29 10:59:31,340 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] M107;(Turn off part fan)
2020-02-29 10:59:31,343 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] M84;(Turn off stepper motors.)" -s machine_center_is_zero="False" -s support_conical_enabled="False" -s material_anti_ooze_retraction_speed="5" -s machine_head_with_fans_polygon="[[-20, 10], [10, 10], [10, -10], [-20, -10]]" -s z_seam_corner="z_seam_corner_inner" -s support_interface_angles="[ ]" -s bottom_thickness="0.72" -s raft_interface_line_spacing="0.8999999999999999" -s material_flush_purge_length="60" -s machine_nozzle_heat_up_speed="2.0" -s cool_fan_speed_min="100.0" -s wipe_move_distance="20" -s bridge_skin_speed_3="10" -s magic_fuzzy_skin_point_dist="0.8" -s filter_out_tiny_gaps="True" -s spaghetti_flow="20" -s machine_heated_build_volume="False" -s extruder_prime_pos_abs="False" -s material_adhesion_tendency="10" -s infill_sparse_thickness="0.13125" -s speed_wall_0="37.5" -s machine_extruders_share_heater="False" -s cool_lift_head="False" -s zig_zaggify_infill="False" -s acceleration_enabled="False" -s support_roof_extruder_nr="0" -s layer_start_x="0.0" -s machine_min_cool_heat_time_window="50.0" -s multiple_mesh_overlap="0.15" -s wipe_retraction_retract_speed="40" -s support_bottom_pattern="concentric" -s material_break_preparation_speed="2" -s acceleration_support_bottom="3000" -s material_end_of_filament_purge_length="20" -s wireframe_roof_drag_along="0.8" -s support_bottom_line_distance="0.35" -s wall_min_flow="0" -s ironing_flow="10.0" -s acceleration_prime_tower="3000" -s retraction_hop_after_extruder_switch_height="1" -s skirt_gap="3" -s speed_ironing="13.333333333333334" -s machine_max_acceleration_e="10000" -s line_width="0.35" -s zig_zaggify_support="False" -s wipe_hop_enable="False" -s optimize_wall_printing_order="False" -s raft_interface_line_width="0.7" -s gantry_height="120" -s material_surface_energy="100" -s print_bed_temperature="60" -s magic_mesh_surface_mode="normal" -s raft_fan_speed="0" -s wireframe_up_half_speed="0.3" -s machine_max_feedrate_e="100" -s spaghetti_infill_stepped="True" -s raft_surface_fan_speed="0" -s meshfix_union_all_remove_holes="False" -s speed_wall_x="50" -s raft_base_jerk="20" -s machine_extruder_count="1" -s jerk_support_roof="20" -s wireframe_top_delay="0" -s machine_endstop_positive_direction_y="False" -s jerk_topbottom="20" -s remove_empty_first_layers="True" -s support_bottom_height="1" -s raft_acceleration="3000" -s jerk_print_layer_0="20" -s wireframe_roof_inset="3" -s material_anti_ooze_retracted_position="-4" -s expand_skins_expand_distance="1.0499999999999998" -s bridge_wall_speed="18.75" -s support_bottom_offset="0.0" -s wireframe_flat_delay="0.1" -s machine_nozzle_expansion_angle="45" -s brim_line_count="15" -s support_roof_line_distance="0.35" -s prime_tower_line_width="0.35" -s infill_line_width="0.35" -s magic_fuzzy_skin_outside_only="False" -s speed_equalize_flow_max="150" -s jerk_roofing="20" -s raft_base_line_width="0.8" -s coasting_enable="True" -s support_interface_line_width="0.35" -s support_bottom_angles="[ ]" -s support_skip_zag_per_mm="20" -s support_extruder_nr_layer_0="0" -s meshfix_maximum_travel_resolution="0.7" -s cool_min_speed="10" -s machine_disallowed_areas="[]" -s support_interface_enable="False" -s bridge_skin_density_3="80" -s machine_max_feedrate_z="1.5" -s support_roof_density="100" -s spaghetti_max_height="2.0" -s skirt_line_count="2" -s retraction_count_max="90" -s retraction_extrusion_window="2.5" -s support_fan_enable="False" -s support_roof_pattern="concentric" -s support_mesh="False" -s wireframe_straight_before_down="20" -s material_print_temperature="210" -s retraction_extra_prime_amount="0" -s wireframe_printspeed="5" -s machine_steps_per_mm_y="50" -s support_tree_branch_diameter="2" -s speed_slowdown_layers="2" -s default_material_print_temperature="210" -s roofing_layer_count="0" -s relative_extrusion="False" -s wall_0_inset="0.025000000000000022" -s brim_width="5" -s speed_support_infill="37.5" -s raft_base_line_spacing="1.6" -s max_extrusion_before_wipe="10" -s ironing_pattern="zigzag" -s speed_travel="120" -s support_angle="50" -s raft_base_speed="18.75" -s layer_0_z_overlap="0.13125" -s speed_z_hop="10" -s platform_adhesion="0" -s support_bottom_stair_step_width="5.0" -s raft_interface_jerk="20" -s material_shrinkage_percentage="0" -s ironing_line_spacing="0.1" -s skin_line_width="0.35" -s connect_infill_polygons="False" -s wireframe_bottom_delay="0" -s mesh_position_y="0" -s infill_randomize_start_location="False" -s machine_nozzle_head_distance="3" -s support_brim_width="8.0" -s top_layers="6" -s support_infill_sparse_thickness="0.13125" -s material_bed_temperature_layer_0="65" -s clean_between_layers="False" -s travel="0" -s material_bed_temp_wait="True" -s raft_airgap="0.2625" -s material_flush_purge_speed="0.5" -s support_enable="False" -s prime_tower_enable="False" -s raft_surface_thickness="0.13125" -s jerk_skirt_brim="20" -s machine_heat_zone_length="16" -s gradual_infill_step_height="1.5" -s outer_inset_first="False" -s prime_tower_brim_enable="False" -s top_skin_preshrink="1.0499999999999998" -s top_skin_expand_distance="1.0499999999999998" -s jerk_print="20" -s mold_roof_height="0.5" -s jerk_ironing="20" -s roofing_angles="[ ]" -s support_top_distance="0.1" -s retraction_hop_after_extruder_switch="True" -s material_linear_advance_factor_skirt_brim="0" -s layer_height_0="0.2625" -s switch_extruder_retraction_speeds="20" -s machine_firmware_retract="False" -s meshfix_union_all="True" -s support_z_distance="0.1" -s bridge_settings_enabled="False" -s z_seam_y="120" -s acceleration_layer_0="3000" -s raft_interface_thickness="0.21875" -s wall_line_count="3" -s magic_fuzzy_skin_point_density="1.25" -s top_bottom_thickness="0.72" -s machine_width="120" -s prime_tower_flow="100" -s acceleration_ironing="3000" -s raft_base_fan_speed="0" -s support_tree_collision_resolution="0.175" -s skin_no_small_gaps_heuristic="False" -s wipe_hop_amount="1" -s support_join_distance="2.0" -s machine_buildplate_type="glass" -s time="10:59:30" -s infill_material_flow="100" -s wireframe_enabled="False" -s material_linear_advance_factor_topbottom="0" -s wipe_retraction_prime_speed="40" -s wipe_pause="0" -s bridge_skin_support_threshold="50" -e0 -s switch_extruder_retraction_speeds="20" -s support_interface_density="100" -s cool_fan_speed="100.0" -s raft_base_thickness="0.30625" -s machine_nozzle_offset_x="0" -s initial_layer_line_width_factor="100.0" -s bridge_skin_material_flow="60" -s material_end_of_filament_purge_speed="0.5" -s retraction_retract_speed="40" -s speed_layer_0="30" -s infill="0" -s small_feature_speed_factor="50" -s support_infill_sparse_thickness="0.13125" -s speed_prime_tower="50" -s support_brim_enable="False" -s infill_multiplier="1" -s gradual_support_infill_steps="0" -s infill_sparse_density="10" -s bottom_skin_expand_distance="1.0499999999999998" -s machine_nozzle_cool_down_speed="2.0" -s infill_offset_x="0" -s limit_support_retractions="True" -s machine_extruder_end_pos_x="0" -s infill_offset_y="0" -s acceleration_print_layer_0="3000" -s wall_min_flow_retract="False" -s speed_support_roof="25.0" -s xy_offset_layer_0="0" -s z_seam_position="back" -s material_guid="0ff92885-617b-4144-a03c-9989872454bc" -s material_linear_advance_factor_support_interface="0" -s material_linear_advance_factor_infill="0" -s material_break_preparation_speed="2" -s acceleration_support_bottom="3000" -s material_end_of_filament_purge_length="20" -s gradual_support_infill_step_height="1" -s support_conical_angle="30" -s raft_surface_acceleration="3000" -s support_roof_pattern="concentric" -s jerk_layer_0="20" -s support_pattern="zigzag" -s jerk_infill="20" -s speed_equalize_flow_enabled="False" -s top_thickness="0.72" -s bottom_skin_preshrink="1.0499999999999998" -s raft_surface_line_spacing="0.35" -s skin_edge_support_layers="0" -s wall_line_width="0.35" -s xy_offset="0" -s travel_avoid_other_parts="True" -s raft_interface_speed="18.75" -s travel_avoid_distance="0.625" -s support_interface_height="1" -s wipe_move_distance="20" -s cool_fan_speed_min="100.0" -s acceleration_skirt_brim="3000" -s meshfix="0" -s support_bottom_material_flow="100" -s acceleration_wall="3000" -s ironing_enabled="False" -s acceleration_travel="5000" -s support_supported_skin_fan_speed="100" -s infill_wall_line_count="0" -s support_wall_count="0" -s skin_edge_support_thickness="0" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s experimental="0" -s support_skip_some_zags="False" -s travel_compensate_overlapping_walls_0_enabled="True" -s support_bottom_line_width="0.35" -s material_flow="100" -s support_offset="0" -s raft_smoothing="5" -s speed_topbottom="20" -s wipe_hop_enable="False" -s zig_zaggify_support="False" -s speed_print="50" -s prime_tower_min_volume="6" -s jerk_travel="30" -s material_linear_advance_factor_skirt_brim="0" -s support_tree_branch_diameter="2" -s machine_steps_per_mm_y="50" -s acceleration_support_interface="3000" -s spaghetti_max_infill_angle="10" -s bridge_wall_material_flow="50" -s wipe_hop_speed="10" -s jerk_wall_0="20" -s retraction_hop="1" -s wipe_pause="0" -s wipe_retraction_prime_speed="40" -s minimum_support_area="0.0" -s material_linear_advance_factor_wall_0="0" -s wall_0_wipe_dist="0.2" -s switch_extruder_extra_prime_amount="0" -s support_tower_maximum_supported_diameter="3.0" -s spaghetti_infill_extra_volume="0" -s support_connect_zigzags="True" -s support_xy_distance_overhang="0.2" -s bridge_skin_density_3="80" -s support_interface_enable="False" -s resolution="0" -s support_line_width="0.35" -s material_break_preparation_retracted_position="-16" -s support_xy_overrides_z="z_overrides_xy" -s min_infill_area="0" -s machine_nozzle_tip_outer_diameter="1" -s machine_steps_per_mm_x="50" -s infill_angles="[ ]" -s minimum_interface_area="1.0" -s skirt_brim_line_width="0.35" -s top_bottom_pattern="lines" -s cool_fan_full_layer="2" -s center_object="False" -s spaghetti_inset="0.2" -s gradual_infill_steps="0" -s jerk_travel_layer_0="30.0" -s mold_enabled="False" -s raft_surface_line_width="0.35" -s cooling="0" -s support_tree_collision_resolution="0.175" -s raft_base_fan_speed="0" -s material_print_temperature_layer_0="205" -s raft_interface_line_spacing="0.8999999999999999" -s machine_nozzle_heat_up_speed="2.0" -s material_flush_purge_length="60" -s bridge_skin_material_flow_2="100" -s speed_support_interface="25.0" -s support_interface_offset="0.0" -s jerk_support="20" -s wall_line_width_x="0.35" -s support_line_distance="2.3333333333333335" -s retraction_enable="True" -s switch_extruder_retraction_speed="20" -s retraction_hop_enabled="False" -s acceleration_roofing="3000" -s cool_min_layer_time_fan_speed_max="10" -s wipe_retraction_speed="40" -s retraction_amount="2.5" -s raft_speed="25.0" -s mold_angle="40" -s material_flow_layer_0="100" -s wall_material_flow="100" -s bridge_skin_material_flow_3="110" -s bridge_fan_speed_2="0" -s initial_bottom_layers="6" -s support_interface_pattern="concentric" -s connect_skin_polygons="False" -s infill_pattern="grid" -s material_flow_dependent_temperature="False" -s bottom_layers="6" -s magic_fuzzy_skin_thickness="0.3" -s meshfix_extensive_stitching="False" -s infill_wipe_dist="0.0875" -s machine_extruder_start_pos_abs="False" -s skirt_brim_material_flow="100" -s bridge_skin_speed="10" -s jerk_wall_x="20" -s wipe_retraction_amount="2.5" -s material_break_temperature="50" -s support_roof_height="1" -s magic_fuzzy_skin_enabled="False" -s connect_infill_polygons="False" -s machine_extruder_start_code="" -s support_material_flow="100" -s bridge_fan_speed="100" -s bridge_sparse_infill_max_density="0" -s wall_thickness="1.05" -s support_bottom_distance="0.1" -s material_crystallinity="False" -s machine_steps_per_mm_e="1600" -s jerk_wall="20" -s dual="0" -s support_bottom_enable="False" -s skin_overlap="5" -s speed_infill="50" -s machine_nozzle_id="unknown" -s wipe_brush_pos_x="100" -s acceleration_travel_layer_0="5000.0" -s raft_surface_layers="1" -s skirt_brim_minimal_length="250" -s material_linear_advance_factor="0" -s cool_min_layer_time="5" -s wipe_retraction_enable="True" -s travel_avoid_supports="False" -s acceleration_infill="3000" -s speed_ironing="13.333333333333334" -s support_roof_line_width="0.35" -s extruder_prime_pos_y="0" -s material_linear_advance_factor_prime_tower="0" -s retraction_prime_speed="40" -s z_seam_type="sharpest_corner" -s prime_blob_enable="False" -s meshfix_keep_open_polygons="False" -s raft_surface_speed="25.0" -s infill_enable_travel_optimization="False" -s machine_nozzle_temp_enabled="True" -s switch_extruder_retraction_amount="16" -s skirt_brim_speed="30" -s material_maximum_park_duration="300" -s infill_material_flow="100" -s support_use_towers="True" -s infill_support_enabled="False" -s cool_fan_speed_0="0" -s support_brim_line_count="23" -s blackmagic="0" -s multiple_mesh_overlap="0.15" -s wipe_retraction_retract_speed="40" -s material_linear_advance_factor_wall_x="0" -s acceleration_print="3000" -s support_bottom_pattern="concentric" -s meshfix_maximum_deviation="0.05" -s cool_fan_enabled="True" -s wall_overhang_angle="90" -s cool_fan_speed_max="100.0" -s machine_extruder_end_code="" -s support_roof_angles="[ ]" -s retraction_hop_after_extruder_switch_height="1" -s machine_extruder_end_pos_abs="False" -s support="0" -s spaghetti_infill_enabled="False" -s acceleration_support="3000" -s acceleration_wall_0="3000" -s jerk_support_bottom="20" -s material_extrusion_cool_down_speed="0.7" -s speed_support_bottom="25.0" -s support_conical_min_width="5.0" -s coasting_min_volume="0.8" -s material_linear_advance_factor_wall="0" -s cool_fan_full_at_height="0.2625" -s support_infill_angles="[ ]" -s shell="0" -s support_tower_diameter="3.0" -s machine_extruder_start_pos_x="0" -s wipe_hop_amount="1" -s support_join_distance="2.0" -s support_tree_angle="40" -s fill_perimeter_gaps="everywhere" -s prime_tower_wipe_enabled="True" -s machine_heat_zone_length="16" -s jerk_skirt_brim="20" -s raft_jerk="20" -s speed_print_layer_0="30" -s command_line_settings="0" -s material_linear_advance_factor_support="0" -s conical_overhang_angle="50" -s infill_overlap_mm="0.035" -s mesh_position_z="0" -s speed="0" -s material_diameter="1.75" -s meshfix_union_all_remove_holes="False" -s gradual_infill_step_height="1.5" -s cool_lift_head="False" -s speed_wall_0="37.5" -s outer_inset_first="False" -s extruder_prime_pos_z="0" -s support_tower_roof_angle="65" -s meshfix_maximum_resolution="0.5" -s wipe_repeat_count="5" -s support_tree_branch_distance="1" -s wall_x_material_flow="100" -s min_skin_width_for_expansion="4.8220467716427034e-17" -s material_no_load_move_factor="0.940860215" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s max_skin_angle_for_expansion="90" -s top_bottom_pattern_0="lines" -s alternate_extra_perimeter="False" -s support_roof_enable="False" -s slicing_tolerance="middle" -s machine_extruder_end_pos_y="0" -s cross_support_density_image="" -s z_seam_relative="False" -s support_xy_distance="0.7" -s speed_wall="25.0" -s material_final_print_temperature="185" -s machine_endstop_positive_direction_x="False" -s bridge_enable_more_layers="True" -s conical_overhang_enabled="False" -s speed_travel_layer_0="72.0" -s fill_outline_gaps="False" -s machine_filament_park_distance="16" -s support_zag_skip_count="9" -s material_break_retracted_position="-50" -s material_initial_print_temperature="190" -s switch_extruder_prime_speed="20" -s extruder_prime_pos_x="0" -s layer_start_y="0.0" -s filter_out_tiny_gaps="True" -s bridge_skin_speed_3="10" -s spaghetti_flow="20" -s magic_fuzzy_skin_point_dist="0.8" -s coasting_speed="90" -s skin_material_flow="100" -s support_bottom_density="100" -s acceleration_wall_x="3000" -s skin_overlap_mm="0.0175" -s small_feature_max_length="0.0" -s support_initial_layer_line_distance="2.3333333333333335" -s support_bottom_offset="0.0" -s bridge_wall_speed="18.75" -s meshfix_union_all="True" -s support_z_distance="0.1" -s infill_line_distance="7.0" -s minimum_bottom_area="1.0" -s retraction_combing_max_distance="0" -s z_seam_x="60.0" -s expand_skins_expand_distance="1.0499999999999998" -s mesh_position_x="0" -s wipe_retraction_extra_prime_amount="0" -s jerk_support_roof="20" -s machine_endstop_positive_direction_y="False" -s coasting_volume="0.064" -s machine_endstop_positive_direction_z="True" -s small_feature_speed_factor_0="50" -s infill_support_angle="40" -s raft_surface_jerk="20" -s support_interface_skip_height="0.3" -s mold_width="5" -s infill_before_walls="True" -s material="0" -s jerk_support_infill="20" -s wall_overhang_speed_factor="100" -s jerk_prime_tower="20" -s skin_outline_count="1" -s material_anti_ooze_retraction_speed="5" -s support_conical_enabled="False" -s bridge_skin_speed_2="10" -s retract_at_layer_change="False" -s raft_base_jerk="20" -s speed_wall_x="50" -s support_roof_material_flow="100" -s bridge_skin_density_2="75" -s brim_replaces_support="True" -s acceleration_support_infill="3000" -s brim_gap="0" -s travel_compensate_overlapping_walls_enabled="True" -s roofing_pattern="lines" -s travel_compensate_overlapping_walls_x_enabled="True" -s wall_line_width_0="0.35" -s cross_infill_pocket_size="7.0" -s raft_margin="5" -s support_bottom_stair_step_height="0.3" -s brim_outside_only="True" -s material_standby_temperature="175" -s speed_roofing="20" -s roofing_line_width="0.35" -s speed_support="37.5" -s ironing_inset="0.175" -s bridge_fan_speed_3="0" -s support_tree_branch_diameter_angle="5" -s support_infill_rate="15" -s infill_randomize_start_location="False" -s mesh_position_y="0" -s wall_line_count="3" -s magic_fuzzy_skin_point_density="1.25" -s platform_adhesion="0" -s support_bottom_stair_step_width="5.0" -s speed_z_hop="10" -s retraction_speed="40" -s wall_0_material_flow="100" -s cool_min_speed="10" -s bridge_skin_density="100" -s raft_base_line_width="0.8" -s machine_nozzle_offset_y="0" -s extruder_nr="0" -s infill_overlap="10" -s support_interface_material_flow="100" -s magic_mesh_surface_mode="normal" -s raft_fan_speed="0" -s raft_interface_line_width="0.7" -s material_surface_energy="100" -s retraction_extrusion_window="2.5" -s support_fan_enable="False" -s machine_extruder_start_pos_y="0" -s extruder_prime_pos_abs="False" -s material_adhesion_tendency="0" -s infill_sparse_thickness="0.13125" -s skin_no_small_gaps_heuristic="False" -s machine_nozzle_head_distance="3" -s support_brim_width="8.0" -s top_layers="6" -s material_break_preparation_temperature="200" -s layer_start_x="0.0" -s machine_min_cool_heat_time_window="50.0" -s support_bottom_line_distance="0.35" -s zig_zaggify_infill="False" -s wall_min_flow="0" -s ironing_flow="10.0" -s support_roof_offset="0.0" -s acceleration_support_roof="3000" -s acceleration_prime_tower="3000" -s skirt_gap="3" -s line_width="0.35" -s optimize_wall_printing_order="False" -s raft_acceleration="3000" -s support_bottom_height="1" -s raft_base_acceleration="3000" -s skirt_line_count="2" -s retraction_count_max="90" -s ironing_only_highest_layer="False" -s acceleration_topbottom="3000" -s machine_settings="0" -s small_hole_max_size="0" -s brim_line_count="15" -s support_roof_line_distance="0.35" -s infill_line_width="0.35" -s magic_fuzzy_skin_outside_only="False" -s prime_tower_line_width="0.35" -s jerk_print_layer_0="20" -s material_anti_ooze_retracted_position="-4" -s support_interface_angles="[ ]" -s bottom_thickness="0.72" -s speed_equalize_flow_max="150" -s jerk_roofing="20" -s minimum_roof_area="1.0" -s machine_extruder_cooling_fan_number="0" -s machine_nozzle_size="0.4" -s raft_interface_jerk="20" -s material_shrinkage_percentage="0" -s support_roof_density="100" -s spaghetti_max_height="2.0" -s bridge_skin_support_threshold="50" -s material_linear_advance_factor_topbottom="0" -s material_print_temperature="200" -s retraction_extra_prime_amount="0" -s default_material_print_temperature="200" -s roofing_layer_count="0" -s wall_0_inset="0.025000000000000022" -s brim_width="5" -s speed_support_infill="37.5" -s raft_base_line_spacing="1.6" -s max_extrusion_before_wipe="10" -s roofing_material_flow="100" -s prime_tower_flow="100" -s acceleration_ironing="3000" -s raft_interface_acceleration="3000" -s spaghetti_infill_stepped="True" -s raft_surface_fan_speed="0" -s jerk_print="20" -s z_seam_y="120" -s retraction_min_travel="0.7" -s acceleration_layer_0="3000" -s material_break_speed="25" -s ironing_line_spacing="0.1" -s raft_airgap="0.2625" -s material_flush_purge_speed="0.5" -s skin_line_width="0.35" -s machine_steps_per_mm_z="50" -s skin_angles="[ ]" -s skin_preshrink="1.0499999999999998" -s clean_between_layers="False" -s travel="0" -s raft_surface_thickness="0.13125" -s top_skin_preshrink="1.0499999999999998" -s jerk_support_interface="20" -s cross_infill_density_image="" -s support_interface_line_width="0.35" -s support_skip_zag_per_mm="20" -s support_bottom_angles="[ ]" -s ironing_pattern="zigzag" -s speed_travel="120" -s support_angle="50" -s raft_base_speed="18.75" -s layer_0_z_overlap="0.13125" -s top_skin_expand_distance="1.0499999999999998" -s sub_div_rad_add="0.35" -s z_seam_corner="z_seam_corner_inner" -s roofing_angles="[ ]" -s jerk_ironing="20" -s top_bottom_thickness="0.72" -s support_top_distance="0.1" -s retraction_hop_after_extruder_switch="True" -s jerk_topbottom="20" -s bridge_wall_coast="100" -s raft_interface_fan_speed="0" -s raft_interface_thickness="0.21875" -s meshfix_maximum_travel_resolution="0.7" -s machine_feeder_wheel_diameter="10.0" -s retraction_hop_only_when_collides="False" -s coasting_enable="True" -s mold_roof_height="0.5" -g -e0 -l "0" -s extruder_nr="0"
2020-02-29 10:59:49,943 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 705 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-02-29 10:59:50,249 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 10:59:50,253 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 10:59:50,298 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [663]: Slicing took 19.613095998764038 seconds
2020-02-29 10:59:50,299 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [664]: Number of models per buildplate: {0: 1}
2020-02-29 10:59:50,299 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [678]: See if there is more to slice...
2020-02-29 10:59:50,484 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [181]: Socket state changed to Closing
2020-02-29 10:59:50,486 - DEBUG - [MainThread] UM.Backend.Backend._onSocketError [203]: Socket debug: Arcus Error (13): Closing socket because other side requested close.
2020-02-29 10:59:50,490 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [183]: Socket state changed to Closed
2020-02-29 10:59:50,490 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onBackendQuit [829]: Backend quit with return code 0. Resetting process and socket.
2020-02-29 11:02:51,047 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-02-29 11:02:51,874 - INFO - [Thread-2] STLReader.STLReader.load_file [51]: Using NumPy-STL to load STL data.
2020-02-29 11:02:51,880 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-02-29 11:02:51,887 - DEBUG - [Thread-2] UM.Mesh.MeshData.calculateNormalsFromVertices [495]: Calculating normals took 0.0013990402221679688 seconds
2020-02-29 11:02:51,889 - DEBUG - [Thread-2] STLReader.STLReader._read [102]: Loaded a mesh with 50814 vertices
2020-02-29 11:02:51,917 - DEBUG - [Thread-2] UM.Mesh.MeshData.approximateConvexHull [452]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.023128032684326172 seconds. 633 input vertices. 633 output vertices.
2020-02-29 11:02:51,928 - DEBUG - [Thread-2] UM.FileHandler.ReadFileJob.run [71]: Loading file took 0.1 seconds
2020-02-29 11:02:51,957 - DEBUG - [Thread-2] UM.Mesh.MeshData.approximateConvexHull [452]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.02368307113647461 seconds. 629 input vertices. 629 output vertices.
2020-02-29 11:02:51,967 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 11:02:51,971 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 11:02:52,092 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: PlatformPhysicsOp.(trans.=<0.0,-0.196,0.0>), took 1ms
2020-02-29 11:02:54,573 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [225]: Starting to slice...
2020-02-29 11:02:54,574 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [243]: Going to slice build plate [0]!
2020-02-29 11:02:54,585 - DEBUG - [MainThread] UM.Backend.Backend._createSocket [213]: Previous socket existed. Closing that first.
2020-02-29 11:02:54,592 - WARNING - [Thread-3] UM.Decorators.deprecated_function [20]: <function GlobalStack.extruders at 0x600006f04c78> is deprecated (since 4.4): Please use extruderList instead.
2020-02-29 11:02:54,612 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [173]: Socket state changed to Listening
2020-02-29 11:02:54,687 - INFO - [MainThread] UM.Backend.Backend.startEngine [81]: Started engine process: /Applications/Ultimaker Cura 3.app/Contents/MacOS/CuraEngine
2020-02-29 11:02:54,694 - DEBUG - [MainThread] UM.Backend.Backend._backendLog [101]: [Backend] Calling engine with: ['/Applications/Ultimaker Cura 3.app/Contents/MacOS/CuraEngine', 'connect', '127.0.0.1:49674', '']
2020-02-29 11:02:54,833 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-02-29 11:02:54,836 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [177]: Socket state changed to Connected
2020-02-29 11:02:54,843 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] Cura_SteamEngine version 4.5.0
2020-02-29 11:02:54,855 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] Copyright (C) 2019 Ultimaker
2020-02-29 11:02:54,861 - DEBUG - [MainThread] UM.Backend.Backend._onSocketStateChanged [167]: Backend connected on port 49674
2020-02-29 11:02:54,872 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-02-29 11:02:54,882 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] This program is free software: you can redistribute it and/or modify
2020-02-29 11:02:54,886 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] it under the terms of the GNU Affero General Public License as published by
2020-02-29 11:02:54,889 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] the Free Software Foundation, either version 3 of the License, or
2020-02-29 11:02:54,892 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] (at your option) any later version.
2020-02-29 11:02:54,894 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-02-29 11:02:54,897 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] This program is distributed in the hope that it will be useful,
2020-02-29 11:02:54,899 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] but WITHOUT ANY WARRANTY; without even the implied warranty of
2020-02-29 11:02:54,902 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
2020-02-29 11:02:54,904 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] GNU Affero General Public License for more details.
2020-02-29 11:02:54,907 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-02-29 11:02:54,909 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] You should have received a copy of the GNU Affero General Public License
2020-02-29 11:02:54,912 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] along with this program.  If not, see <http://www.gnu.org/licenses/>.
2020-02-29 11:02:55,007 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onStartSliceCompleted [429]: Sending slice message took 0.4327700138092041 seconds
2020-02-29 11:02:55,172 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING]  -s extruders_enabled_count="1" -s support_interface_density="100" -s cool_fan_speed="100.0" -s raft_base_thickness="0.30625" -s bridge_skin_material_flow="60" -s slicing_tolerance="middle" -s material_end_of_filament_purge_speed="0.5" -s prime_tower_size="20" -s retraction_retract_speed="40" -s speed_layer_0="30" -s infill="0" -s small_feature_speed_factor="50" -s speed_prime_tower="50" -s support_brim_enable="False" -s infill_multiplier="1" -s gradual_support_infill_steps="0" -s initial_extruder_nr="0" -s infill_extruder_nr="-1" -s infill_sparse_density="22" -s bottom_skin_expand_distance="1.0499999999999998" -s machine_nozzle_cool_down_speed="2.0" -s infill_offset_x="0" -s machine_depth="120" -s adhesion_z_offset_extensive_processing="False" -s limit_support_retractions="True" -s machine_max_acceleration_y="800" -s infill_offset_y="0" -s acceleration_print_layer_0="3000" -s wall_min_flow_retract="False" -s speed_support_roof="25.0" -s xy_offset_layer_0="0" -s adhesion_type="skirt" -s z_seam_position="back" -s material_guid="" -s magic_spiralize="False" -s material_linear_advance_factor_support_interface="0" -s machine_max_acceleration_x="800" -s material_linear_advance_factor_infill="0" -s print_temperature="210" -s skin_angles="[ ]" -s gradual_support_infill_step_height="1" -s support_conical_angle="30" -s raft_surface_acceleration="3000" -s jerk_layer_0="20" -s machine_max_feedrate_x="150" -s support_pattern="zigzag" -s jerk_infill="20" -s speed_equalize_flow_enabled="False" -s top_thickness="0.72" -s bottom_skin_preshrink="1.0499999999999998" -s raft_surface_line_spacing="0.35" -s wall_line_width="0.35" -s xy_offset="0" -s alternate_carve_order="True" -s travel_avoid_other_parts="True" -s raft_interface_speed="18.75" -s travel_avoid_distance="0.625" -s support_interface_height="1" -s jerk_travel_layer_0="30.0" -s date="29-02-2020" -s wireframe_flow="100" -s machine_acceleration="4000" -s machine_minimum_feedrate="0.0" -s skin_preshrink="1.0499999999999998" -s jerk_wall="20" -s retract_at_layer_change="False" -s jerk_travel="30" -s support_skip_some_zags="False" -s minimum_roof_area="1.0" -s wireframe_flow_connection="100" -s bridge_skin_density="100" -s skirt_brim_line_width="0.35" -s top_bottom_pattern="lines" -s travel_compensate_overlapping_walls_0_enabled="True" -s flow_rate_max_extrusion_offset="0" -s material_diameter="2.85" -s support_bottom_line_width="0.35" -s raft_smoothing="5" -s speed_topbottom="20" -s wireframe_drag_along="0.6" -s material_break_speed="25" -s raft_interface_acceleration="3000" -s minimum_polygon_circumference="1.0" -s support_interface_skip_height="0.3" -s speed_print="50" -s skin_edge_support_layers="0" -s support_type="everywhere" -s support_roof_line_width="0.35" -s wireframe_printspeed_bottom="5" -s raft_surface_line_width="0.35" -s prime_tower_min_volume="6" -s prime_blob_enable="False" -s switch_extruder_prime_speed="20" -s wall_x_extruder_nr="-1" -s machine_steps_per_mm_z="50" -s smooth_spiralized_contours="True" -s ooze_shield_dist="2" -s bridge_wall_material_flow="50" -s cool_fan_full_layer="2" -s roofing_material_flow="100" -s wipe_hop_speed="10" -s infill_angles="[ ]" -s infill_line_distance="3.1818181818181817" -s minimum_bottom_area="1.0" -s minimum_support_area="0.0" -s material_linear_advance_factor_wall_0="0" -s wall_0_wipe_dist="0.2" -s switch_extruder_extra_prime_amount="0" -s material_extrusion_cool_down_speed="0.7" -s wall_x_material_flow="100" -s support_xy_distance_overhang="0.2" -s wireframe_printspeed_up="5" -s resolution="0" -s retraction_hop="1" -s jerk_wall_0="20" -s skin_material_flow="100" -s support_bottom_density="100" -s jerk_support_interface="20" -s material_print_temperature_layer_0="215" -s retraction_min_travel="0.7" -s support_xy_overrides_z="z_overrides_xy" -s min_infill_area="0" -s machine_nozzle_tip_outer_diameter="1" -s machine_steps_per_mm_x="50" -s material_break_preparation_temperature="210" -s machine_nozzle_size="0.4" -s support_initial_layer_line_distance="2.3333333333333335" -s center_object="False" -s spaghetti_inset="0.2" -s mold_enabled="False" -s acceleration_travel="5000" -s acceleration_wall="3000" -s support_bottom_material_flow="100" -s ironing_enabled="False" -s cooling="0" -s support_infill_angles="[ ]" -s shell="0" -s bridge_skin_material_flow_2="100" -s speed_support_interface="25.0" -s meshfix="0" -s acceleration_skirt_brim="3000" -s support_line_distance="2.3333333333333335" -s retraction_enable="True" -s retraction_hop_enabled="False" -s switch_extruder_retraction_speed="20" -s acceleration_roofing="3000" -s anti_overhang_mesh="False" -s cool_min_layer_time_fan_speed_max="10" -s wipe_retraction_speed="40" -s retraction_amount="2.5" -s retraction_combing="noskin" -s material_flow_layer_0="100" -s wall_material_flow="100" -s extruder_prime_pos_z="0" -s support_tower_roof_angle="65" -s connect_skin_polygons="False" -s infill_pattern="grid" -s magic_fuzzy_skin_thickness="0.3" -s meshfix_extensive_stitching="False" -s infill_wipe_dist="0.0875" -s skirt_brim_material_flow="100" -s bridge_skin_speed="10" -s mesh_position_x="0" -s prime_tower_position_y="95.65" -s jerk_wall_x="20" -s support_bottom_extruder_nr="0" -s support_roof_height="1" -s cutting_mesh="False" -s machine_max_jerk_xy="20" -s support_material_flow="100" -s bridge_fan_speed="100" -s support_line_width="0.35" -s ooze_shield_enabled="False" -s support_extruder_nr="0" -s wall_thickness="1.05" -s support_bottom_distance="0.1" -s material_crystallinity="False" -s machine_steps_per_mm_e="1600" -s dual="0" -s support_bottom_enable="False" -s wireframe_nozzle_clearance="1" -s speed_infill="50" -s machine_nozzle_id="unknown" -s wipe_brush_pos_x="100" -s acceleration_travel_layer_0="5000.0" -s meshfix_maximum_deviation="0.05" -s cool_fan_enabled="True" -s wall_overhang_angle="90" -s cool_fan_speed_max="100.0" -s raft_surface_layers="1" -s skirt_brim_minimal_length="250" -s material_linear_advance_factor="0" -s cool_min_layer_time="5" -s day="Sat" -s wipe_retraction_enable="True" -s travel_avoid_supports="False" -s acceleration_infill="3000" -s material_bed_temperature="60" -s bridge_skin_material_flow_3="110" -s bridge_fan_speed_2="0" -s initial_bottom_layers="6" -s support_interface_pattern="concentric" -s cross_infill_density_image="" -s adaptive_layer_height_variation="0.1" -s infill_wall_line_count="0" -s support_supported_skin_fan_speed="100" -s extruder_prime_pos_y="0" -s machine_name="Monoprice Select Mini V2" -s retraction_prime_speed="40" -s material_linear_advance_factor_prime_tower="0" -s z_seam_type="sharpest_corner" -s meshfix_keep_open_polygons="False" -s support_use_towers="True" -s infill_support_enabled="False" -s cool_fan_speed_0="0" -s support_brim_line_count="23" -s blackmagic="0" -s material_print_temp_wait="True" -s support_roof_angles="[ ]" -s infill_mesh_order="0" -s support="0" -s spaghetti_infill_enabled="False" -s acceleration_support="3000" -s support_interface_offset="0.0" -s support_tree_enable="False" -s acceleration_wall_0="3000" -s wireframe_top_jump="0.6" -s jerk_support_bottom="20" -s speed_support_bottom="25.0" -s support_conical_min_width="5.0" -s bottom_layers="6" -s material_flow_dependent_temperature="False" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s support_wall_count="0" -s machine_max_acceleration_z="20" -s skin_edge_support_thickness="0" -s coasting_min_volume="0.8" -s material_linear_advance_factor_wall="0" -s cool_fan_full_at_height="0.2625" -s draft_shield_dist="10" -s layer_height="0.13125" -s material_break_preparation_retracted_position="-16" -s infill_mesh="False" -s mold_angle="40" -s raft_speed="25.0" -s machine_max_jerk_z="0.4" -s support_tree_angle="40" -s wall_line_width_0="0.35" -s cross_infill_pocket_size="3.1818181818181817" -s machine_max_jerk_e="5" -s raft_margin="5" -s raft_surface_speed="25.0" -s infill_enable_travel_optimization="False" -s machine_height="120" -s travel_retract_before_outer_wall="False" -s infill_support_angle="40" -s adaptive_layer_height_variation_step="0.01" -s raft_surface_jerk="20" -s bridge_sparse_infill_max_density="0" -s wireframe_printspeed_flat="5" -s draft_shield_height_limitation="full" -s magic_fuzzy_skin_enabled="False" -s jerk_enabled="False" -s support_mesh_drop_down="True" -s wireframe_roof_fall_down="2" -s wireframe_strategy="compensate" -s machine_gcode_flavor="RepRap (Marlin/Sprinter)" -s conical_overhang_angle="50" -s infill_overlap_mm="0.035" -s mesh_position_z="0" -s travel_speed="120" -s speed="0" -s small_hole_max_size="0" -s material_bed_temp_prepend="True" -s material="0" -s infill_before_walls="True" -s meshfix_maximum_resolution="0.5" -s wipe_repeat_count="5" -s support_tree_branch_distance="1" -s retraction_speed="40" -s gradual_infill_steps="0" -s machine_show_variants="True" -s support_interface_material_flow="100" -s infill_overlap="10" -s jerk_support="20" -s wall_line_width_x="0.35" -s roofing_extruder_nr="-1" -s raft_base_acceleration="3000" -s wall_extruder_nr="-1" -s adaptive_layer_height_threshold="0.2" -s min_skin_width_for_expansion="4.8220467716427034e-17" -s material_no_load_move_factor="0.940860215" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s max_skin_angle_for_expansion="90" -s sub_div_rad_add="0.35" -s support_tree_branch_diameter_angle="5" -s top_bottom_pattern_0="lines" -s alternate_extra_perimeter="False" -s support_roof_enable="False" -s bridge_wall_coast="100" -s raft_interface_fan_speed="0" -s support_offset="0" -s wireframe_fall_down="0.5" -s material_flow="100" -s cross_support_density_image="" -s wireframe_height="3" -s z_seam_relative="False" -s support_tower_maximum_supported_diameter="3.0" -s support_interface_extruder_nr="0" -s nozzle_disallowed_areas="[]" -s support_xy_distance="0.7" -s speed_wall="25.0" -s bridge_enable_more_layers="True" -s conical_overhang_enabled="False" -s speed_travel_layer_0="72.0" -s draft_shield_height="10" -s z_seam_x="60.0" -s retraction_combing_max_distance="0" -s support_infill_rate="15" -s spaghetti_max_infill_angle="10" -s acceleration_support_interface="3000" -s machine_feeder_wheel_diameter="10.0" -s retraction_hop_only_when_collides="False" -s extruder_prime_pos_x="0" -s build_volume_temperature="28" -s layer_start_y="0.0" -s material_break_retracted_position="-50" -s material_initial_print_temperature="200" -s support_infill_extruder_nr="0" -s coasting_speed="90" -s carve_multiple_volumes="False" -s flow_rate_extrusion_offset_factor="100" -s acceleration_wall_x="3000" -s skin_overlap_mm="0.0175" -s small_feature_max_length="0.0" -s wall_0_extruder_nr="-1" -s material_maximum_park_duration="300" -s machine_nozzle_temp_enabled="True" -s switch_extruder_retraction_amount="16" -s skirt_brim_speed="30" -s wipe_retraction_extra_prime_amount="0" -s ironing_only_highest_layer="False" -s acceleration_topbottom="3000" -s machine_settings="0" -s adhesion_extruder_nr="0" -s mold_width="5" -s jerk_support_infill="20" -s wall_overhang_speed_factor="100" -s jerk_prime_tower="20" -s skin_outline_count="1" -s bridge_skin_speed_2="10" -s machine_max_feedrate_y="150" -s support_roof_material_flow="100" -s bridge_skin_density_2="75" -s support_tower_diameter="3.0" -s material_linear_advance_factor_support="0" -s command_line_settings="0" -s brim_replaces_support="True" -s prime_tower_wipe_enabled="True" -s fill_perimeter_gaps="everywhere" -s skin_overlap="5" -s print_sequence="all_at_once" -s acceleration_support_infill="3000" -s brim_gap="0" -s spaghetti_infill_extra_volume="0" -s support_connect_zigzags="True" -s adaptive_layer_height_enabled="False" -s travel_compensate_overlapping_walls_enabled="True" -s roofing_pattern="lines" -s fill_outline_gaps="False" -s support_zag_skip_count="9" -s machine_filament_park_distance="16" -s acceleration_print="3000" -s material_linear_advance_factor_wall_x="0" -s material_final_print_temperature="195" -s ooze_shield_angle="60" -s machine_endstop_positive_direction_x="False" -s travel_compensate_overlapping_walls_x_enabled="True" -s coasting_volume="0.064" -s machine_endstop_positive_direction_z="True" -s small_feature_speed_factor_0="50" -s machine_shape="rectangular" -s machine_heated_bed="True" -s machine_use_extruder_offset_to_offset_coords="True" -s brim_outside_only="True" -s material_standby_temperature="150" -s support_bottom_stair_step_height="0.3" -s speed_roofing="20" -s roofing_line_width="0.35" -s material_print_temp_prepend="True" -s wireframe_printspeed_down="5" -s minimum_interface_area="1.0" -s draft_shield_enabled="False" -s speed_support="37.5" -s adhesion_z_offset="0" -s wireframe_roof_outer_delay="0.2" -s ironing_inset="0.175" -s bridge_fan_speed_3="0" -s initial_layer_line_width_factor="100.0" -s machine_start_gcode="G21;(metric values)
2020-02-29 11:02:55,176 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] G90;(absolute positioning)
2020-02-29 11:02:55,178 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] M82;(set extruder to absolute mode)
2020-02-29 11:02:55,181 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] M107;(start with the fan off)
2020-02-29 11:02:55,184 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] G28;(Home the printer)
2020-02-29 11:02:55,186 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] G92 E0;(Reset the extruder to 0)
2020-02-29 11:02:55,189 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] G0 Z5 E5 F500;(Move up and prime the nozzle)
2020-02-29 11:02:55,192 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] G0 X-1 Z0;(Move outside the printable area)
2020-02-29 11:02:55,195 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] G1 Y60 E8 F500;(Draw a priming/wiping line to the rear)
2020-02-29 11:02:55,197 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] G1 X-1;(Move a little closer to the print area)
2020-02-29 11:02:55,200 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] G1 Y10 E16 F500;(draw more priming/wiping)
2020-02-29 11:02:55,202 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] G1 E15 F250;(Small retract)
2020-02-29 11:02:55,205 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] G92 E0;(Zero the extruder)" -s experimental="0" -s bridge_wall_min_length="5" -s prime_tower_position_x="115.65" -s wipe_retraction_amount="2.5" -s material_break_temperature="50" -s top_bottom_extruder_nr="-1" -s acceleration_support_roof="3000" -s support_roof_offset="0.0" -s wall_0_material_flow="100" -s wireframe_flow_flat="100" -s speed_print_layer_0="30" -s default_material_bed_temperature="60" -s raft_jerk="20" -s machine_end_gcode="G0 X0 Y120;(Stick out the part)
2020-02-29 11:02:55,207 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] M190 S0;(Turn off heat bed, don't wait.)
2020-02-29 11:02:55,210 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] G92 E10;(Set extruder to 10)
2020-02-29 11:02:55,213 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] G1 E7 F200;(retract 3mm)
2020-02-29 11:02:55,217 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] M104 S0;(Turn off nozzle, don't wait)
2020-02-29 11:02:55,220 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] G4 S300;(Delay 5 minutes)
2020-02-29 11:02:55,224 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] M107;(Turn off part fan)
2020-02-29 11:02:55,227 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] M84;(Turn off stepper motors.)" -s machine_center_is_zero="False" -s support_conical_enabled="False" -s material_anti_ooze_retraction_speed="5" -s machine_head_with_fans_polygon="[[-20, 10], [10, 10], [10, -10], [-20, -10]]" -s z_seam_corner="z_seam_corner_inner" -s support_interface_angles="[ ]" -s bottom_thickness="0.72" -s raft_interface_line_spacing="0.8999999999999999" -s material_flush_purge_length="60" -s machine_nozzle_heat_up_speed="2.0" -s cool_fan_speed_min="100.0" -s wipe_move_distance="20" -s bridge_skin_speed_3="10" -s magic_fuzzy_skin_point_dist="0.8" -s filter_out_tiny_gaps="True" -s spaghetti_flow="20" -s machine_heated_build_volume="False" -s extruder_prime_pos_abs="False" -s material_adhesion_tendency="10" -s infill_sparse_thickness="0.13125" -s speed_wall_0="37.5" -s machine_extruders_share_heater="False" -s cool_lift_head="False" -s zig_zaggify_infill="False" -s acceleration_enabled="False" -s support_roof_extruder_nr="0" -s layer_start_x="0.0" -s machine_min_cool_heat_time_window="50.0" -s multiple_mesh_overlap="0.15" -s wipe_retraction_retract_speed="40" -s support_bottom_pattern="concentric" -s material_break_preparation_speed="2" -s acceleration_support_bottom="3000" -s material_end_of_filament_purge_length="20" -s wireframe_roof_drag_along="0.8" -s support_bottom_line_distance="0.35" -s wall_min_flow="0" -s ironing_flow="10.0" -s acceleration_prime_tower="3000" -s retraction_hop_after_extruder_switch_height="1" -s skirt_gap="3" -s speed_ironing="13.333333333333334" -s machine_max_acceleration_e="10000" -s line_width="0.35" -s zig_zaggify_support="False" -s wipe_hop_enable="False" -s optimize_wall_printing_order="False" -s raft_interface_line_width="0.7" -s gantry_height="120" -s material_surface_energy="100" -s print_bed_temperature="60" -s magic_mesh_surface_mode="normal" -s raft_fan_speed="0" -s wireframe_up_half_speed="0.3" -s machine_max_feedrate_e="100" -s spaghetti_infill_stepped="True" -s raft_surface_fan_speed="0" -s meshfix_union_all_remove_holes="False" -s speed_wall_x="50" -s raft_base_jerk="20" -s machine_extruder_count="1" -s jerk_support_roof="20" -s wireframe_top_delay="0" -s machine_endstop_positive_direction_y="False" -s jerk_topbottom="20" -s remove_empty_first_layers="True" -s support_bottom_height="1" -s raft_acceleration="3000" -s jerk_print_layer_0="20" -s wireframe_roof_inset="3" -s material_anti_ooze_retracted_position="-4" -s expand_skins_expand_distance="1.0499999999999998" -s bridge_wall_speed="18.75" -s support_bottom_offset="0.0" -s wireframe_flat_delay="0.1" -s machine_nozzle_expansion_angle="45" -s brim_line_count="15" -s support_roof_line_distance="0.35" -s prime_tower_line_width="0.35" -s infill_line_width="0.35" -s magic_fuzzy_skin_outside_only="False" -s speed_equalize_flow_max="150" -s jerk_roofing="20" -s raft_base_line_width="0.8" -s coasting_enable="True" -s support_interface_line_width="0.35" -s support_bottom_angles="[ ]" -s support_skip_zag_per_mm="20" -s support_extruder_nr_layer_0="0" -s meshfix_maximum_travel_resolution="0.7" -s cool_min_speed="10" -s machine_disallowed_areas="[]" -s support_interface_enable="False" -s bridge_skin_density_3="80" -s machine_max_feedrate_z="1.5" -s support_roof_density="100" -s spaghetti_max_height="2.0" -s skirt_line_count="2" -s retraction_count_max="90" -s retraction_extrusion_window="2.5" -s support_fan_enable="False" -s support_roof_pattern="concentric" -s support_mesh="False" -s wireframe_straight_before_down="20" -s material_print_temperature="210" -s retraction_extra_prime_amount="0" -s wireframe_printspeed="5" -s machine_steps_per_mm_y="50" -s support_tree_branch_diameter="2" -s speed_slowdown_layers="2" -s default_material_print_temperature="210" -s roofing_layer_count="0" -s relative_extrusion="False" -s wall_0_inset="0.025000000000000022" -s brim_width="5" -s speed_support_infill="37.5" -s raft_base_line_spacing="1.6" -s max_extrusion_before_wipe="10" -s ironing_pattern="zigzag" -s speed_travel="120" -s support_angle="50" -s raft_base_speed="18.75" -s layer_0_z_overlap="0.13125" -s speed_z_hop="10" -s platform_adhesion="0" -s support_bottom_stair_step_width="5.0" -s raft_interface_jerk="20" -s material_shrinkage_percentage="0" -s ironing_line_spacing="0.1" -s skin_line_width="0.35" -s connect_infill_polygons="False" -s wireframe_bottom_delay="0" -s mesh_position_y="0" -s infill_randomize_start_location="False" -s machine_nozzle_head_distance="3" -s support_brim_width="8.0" -s top_layers="6" -s support_infill_sparse_thickness="0.13125" -s material_bed_temperature_layer_0="65" -s clean_between_layers="False" -s travel="0" -s material_bed_temp_wait="True" -s raft_airgap="0.2625" -s material_flush_purge_speed="0.5" -s support_enable="False" -s prime_tower_enable="False" -s raft_surface_thickness="0.13125" -s jerk_skirt_brim="20" -s machine_heat_zone_length="16" -s gradual_infill_step_height="1.5" -s outer_inset_first="False" -s prime_tower_brim_enable="False" -s top_skin_preshrink="1.0499999999999998" -s top_skin_expand_distance="1.0499999999999998" -s jerk_print="20" -s mold_roof_height="0.5" -s jerk_ironing="20" -s roofing_angles="[ ]" -s support_top_distance="0.1" -s retraction_hop_after_extruder_switch="True" -s material_linear_advance_factor_skirt_brim="0" -s layer_height_0="0.2625" -s switch_extruder_retraction_speeds="20" -s machine_firmware_retract="False" -s meshfix_union_all="True" -s support_z_distance="0.1" -s bridge_settings_enabled="False" -s z_seam_y="120" -s acceleration_layer_0="3000" -s raft_interface_thickness="0.21875" -s wall_line_count="3" -s magic_fuzzy_skin_point_density="1.25" -s top_bottom_thickness="0.72" -s machine_width="120" -s prime_tower_flow="100" -s acceleration_ironing="3000" -s raft_base_fan_speed="0" -s support_tree_collision_resolution="0.175" -s skin_no_small_gaps_heuristic="False" -s wipe_hop_amount="1" -s support_join_distance="2.0" -s machine_buildplate_type="glass" -s time="11:02:54" -s infill_material_flow="100" -s wireframe_enabled="False" -s material_linear_advance_factor_topbottom="0" -s wipe_retraction_prime_speed="40" -s wipe_pause="0" -s bridge_skin_support_threshold="50" -e0 -s switch_extruder_retraction_speeds="20" -s support_interface_density="100" -s cool_fan_speed="100.0" -s raft_base_thickness="0.30625" -s machine_nozzle_offset_x="0" -s initial_layer_line_width_factor="100.0" -s bridge_skin_material_flow="60" -s material_end_of_filament_purge_speed="0.5" -s retraction_retract_speed="40" -s speed_layer_0="30" -s infill="0" -s small_feature_speed_factor="50" -s support_infill_sparse_thickness="0.13125" -s speed_prime_tower="50" -s support_brim_enable="False" -s infill_multiplier="1" -s gradual_support_infill_steps="0" -s infill_sparse_density="10" -s bottom_skin_expand_distance="1.0499999999999998" -s machine_nozzle_cool_down_speed="2.0" -s infill_offset_x="0" -s limit_support_retractions="True" -s machine_extruder_end_pos_x="0" -s infill_offset_y="0" -s acceleration_print_layer_0="3000" -s wall_min_flow_retract="False" -s speed_support_roof="25.0" -s xy_offset_layer_0="0" -s z_seam_position="back" -s material_guid="0ff92885-617b-4144-a03c-9989872454bc" -s material_linear_advance_factor_support_interface="0" -s material_linear_advance_factor_infill="0" -s material_break_preparation_speed="2" -s acceleration_support_bottom="3000" -s material_end_of_filament_purge_length="20" -s gradual_support_infill_step_height="1" -s support_conical_angle="30" -s raft_surface_acceleration="3000" -s support_roof_pattern="concentric" -s jerk_layer_0="20" -s support_pattern="zigzag" -s jerk_infill="20" -s speed_equalize_flow_enabled="False" -s top_thickness="0.72" -s bottom_skin_preshrink="1.0499999999999998" -s raft_surface_line_spacing="0.35" -s skin_edge_support_layers="0" -s wall_line_width="0.35" -s xy_offset="0" -s travel_avoid_other_parts="True" -s raft_interface_speed="18.75" -s travel_avoid_distance="0.625" -s support_interface_height="1" -s wipe_move_distance="20" -s cool_fan_speed_min="100.0" -s acceleration_skirt_brim="3000" -s meshfix="0" -s support_bottom_material_flow="100" -s acceleration_wall="3000" -s ironing_enabled="False" -s acceleration_travel="5000" -s support_supported_skin_fan_speed="100" -s infill_wall_line_count="0" -s support_wall_count="0" -s skin_edge_support_thickness="0" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s experimental="0" -s support_skip_some_zags="False" -s travel_compensate_overlapping_walls_0_enabled="True" -s support_bottom_line_width="0.35" -s material_flow="100" -s support_offset="0" -s raft_smoothing="5" -s speed_topbottom="20" -s wipe_hop_enable="False" -s zig_zaggify_support="False" -s speed_print="50" -s prime_tower_min_volume="6" -s jerk_travel="30" -s material_linear_advance_factor_skirt_brim="0" -s support_tree_branch_diameter="2" -s machine_steps_per_mm_y="50" -s acceleration_support_interface="3000" -s spaghetti_max_infill_angle="10" -s bridge_wall_material_flow="50" -s wipe_hop_speed="10" -s jerk_wall_0="20" -s retraction_hop="1" -s wipe_pause="0" -s wipe_retraction_prime_speed="40" -s minimum_support_area="0.0" -s material_linear_advance_factor_wall_0="0" -s wall_0_wipe_dist="0.2" -s switch_extruder_extra_prime_amount="0" -s support_tower_maximum_supported_diameter="3.0" -s spaghetti_infill_extra_volume="0" -s support_connect_zigzags="True" -s support_xy_distance_overhang="0.2" -s bridge_skin_density_3="80" -s support_interface_enable="False" -s resolution="0" -s support_line_width="0.35" -s material_break_preparation_retracted_position="-16" -s support_xy_overrides_z="z_overrides_xy" -s min_infill_area="0" -s machine_nozzle_tip_outer_diameter="1" -s machine_steps_per_mm_x="50" -s infill_angles="[ ]" -s minimum_interface_area="1.0" -s skirt_brim_line_width="0.35" -s top_bottom_pattern="lines" -s cool_fan_full_layer="2" -s center_object="False" -s spaghetti_inset="0.2" -s gradual_infill_steps="0" -s jerk_travel_layer_0="30.0" -s mold_enabled="False" -s raft_surface_line_width="0.35" -s cooling="0" -s support_tree_collision_resolution="0.175" -s raft_base_fan_speed="0" -s material_print_temperature_layer_0="205" -s raft_interface_line_spacing="0.8999999999999999" -s machine_nozzle_heat_up_speed="2.0" -s material_flush_purge_length="60" -s bridge_skin_material_flow_2="100" -s speed_support_interface="25.0" -s support_interface_offset="0.0" -s jerk_support="20" -s wall_line_width_x="0.35" -s support_line_distance="2.3333333333333335" -s retraction_enable="True" -s switch_extruder_retraction_speed="20" -s retraction_hop_enabled="False" -s acceleration_roofing="3000" -s cool_min_layer_time_fan_speed_max="10" -s wipe_retraction_speed="40" -s retraction_amount="2.5" -s raft_speed="25.0" -s mold_angle="40" -s material_flow_layer_0="100" -s wall_material_flow="100" -s bridge_skin_material_flow_3="110" -s bridge_fan_speed_2="0" -s initial_bottom_layers="6" -s support_interface_pattern="concentric" -s connect_skin_polygons="False" -s infill_pattern="grid" -s material_flow_dependent_temperature="False" -s bottom_layers="6" -s magic_fuzzy_skin_thickness="0.3" -s meshfix_extensive_stitching="False" -s infill_wipe_dist="0.0875" -s machine_extruder_start_pos_abs="False" -s skirt_brim_material_flow="100" -s bridge_skin_speed="10" -s jerk_wall_x="20" -s wipe_retraction_amount="2.5" -s material_break_temperature="50" -s support_roof_height="1" -s magic_fuzzy_skin_enabled="False" -s connect_infill_polygons="False" -s machine_extruder_start_code="" -s support_material_flow="100" -s bridge_fan_speed="100" -s bridge_sparse_infill_max_density="0" -s wall_thickness="1.05" -s support_bottom_distance="0.1" -s material_crystallinity="False" -s machine_steps_per_mm_e="1600" -s jerk_wall="20" -s dual="0" -s support_bottom_enable="False" -s skin_overlap="5" -s speed_infill="50" -s machine_nozzle_id="unknown" -s wipe_brush_pos_x="100" -s acceleration_travel_layer_0="5000.0" -s raft_surface_layers="1" -s skirt_brim_minimal_length="250" -s material_linear_advance_factor="0" -s cool_min_layer_time="5" -s wipe_retraction_enable="True" -s travel_avoid_supports="False" -s acceleration_infill="3000" -s speed_ironing="13.333333333333334" -s support_roof_line_width="0.35" -s extruder_prime_pos_y="0" -s material_linear_advance_factor_prime_tower="0" -s retraction_prime_speed="40" -s z_seam_type="sharpest_corner" -s prime_blob_enable="False" -s meshfix_keep_open_polygons="False" -s raft_surface_speed="25.0" -s infill_enable_travel_optimization="False" -s machine_nozzle_temp_enabled="True" -s switch_extruder_retraction_amount="16" -s skirt_brim_speed="30" -s material_maximum_park_duration="300" -s infill_material_flow="100" -s support_use_towers="True" -s infill_support_enabled="False" -s cool_fan_speed_0="0" -s support_brim_line_count="23" -s blackmagic="0" -s multiple_mesh_overlap="0.15" -s wipe_retraction_retract_speed="40" -s material_linear_advance_factor_wall_x="0" -s acceleration_print="3000" -s support_bottom_pattern="concentric" -s meshfix_maximum_deviation="0.05" -s cool_fan_enabled="True" -s wall_overhang_angle="90" -s cool_fan_speed_max="100.0" -s machine_extruder_end_code="" -s support_roof_angles="[ ]" -s retraction_hop_after_extruder_switch_height="1" -s machine_extruder_end_pos_abs="False" -s support="0" -s spaghetti_infill_enabled="False" -s acceleration_support="3000" -s acceleration_wall_0="3000" -s jerk_support_bottom="20" -s material_extrusion_cool_down_speed="0.7" -s speed_support_bottom="25.0" -s support_conical_min_width="5.0" -s coasting_min_volume="0.8" -s material_linear_advance_factor_wall="0" -s cool_fan_full_at_height="0.2625" -s support_infill_angles="[ ]" -s shell="0" -s support_tower_diameter="3.0" -s machine_extruder_start_pos_x="0" -s wipe_hop_amount="1" -s support_join_distance="2.0" -s support_tree_angle="40" -s fill_perimeter_gaps="everywhere" -s prime_tower_wipe_enabled="True" -s machine_heat_zone_length="16" -s jerk_skirt_brim="20" -s raft_jerk="20" -s speed_print_layer_0="30" -s command_line_settings="0" -s material_linear_advance_factor_support="0" -s conical_overhang_angle="50" -s infill_overlap_mm="0.035" -s mesh_position_z="0" -s speed="0" -s material_diameter="1.75" -s meshfix_union_all_remove_holes="False" -s gradual_infill_step_height="1.5" -s cool_lift_head="False" -s speed_wall_0="37.5" -s outer_inset_first="False" -s extruder_prime_pos_z="0" -s support_tower_roof_angle="65" -s meshfix_maximum_resolution="0.5" -s wipe_repeat_count="5" -s support_tree_branch_distance="1" -s wall_x_material_flow="100" -s min_skin_width_for_expansion="4.8220467716427034e-17" -s material_no_load_move_factor="0.940860215" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s max_skin_angle_for_expansion="90" -s top_bottom_pattern_0="lines" -s alternate_extra_perimeter="False" -s support_roof_enable="False" -s slicing_tolerance="middle" -s machine_extruder_end_pos_y="0" -s cross_support_density_image="" -s z_seam_relative="False" -s support_xy_distance="0.7" -s speed_wall="25.0" -s material_final_print_temperature="185" -s machine_endstop_positive_direction_x="False" -s bridge_enable_more_layers="True" -s conical_overhang_enabled="False" -s speed_travel_layer_0="72.0" -s fill_outline_gaps="False" -s machine_filament_park_distance="16" -s support_zag_skip_count="9" -s material_break_retracted_position="-50" -s material_initial_print_temperature="190" -s switch_extruder_prime_speed="20" -s extruder_prime_pos_x="0" -s layer_start_y="0.0" -s filter_out_tiny_gaps="True" -s bridge_skin_speed_3="10" -s spaghetti_flow="20" -s magic_fuzzy_skin_point_dist="0.8" -s coasting_speed="90" -s skin_material_flow="100" -s support_bottom_density="100" -s acceleration_wall_x="3000" -s skin_overlap_mm="0.0175" -s small_feature_max_length="0.0" -s support_initial_layer_line_distance="2.3333333333333335" -s support_bottom_offset="0.0" -s bridge_wall_speed="18.75" -s meshfix_union_all="True" -s support_z_distance="0.1" -s infill_line_distance="7.0" -s minimum_bottom_area="1.0" -s retraction_combing_max_distance="0" -s z_seam_x="60.0" -s expand_skins_expand_distance="1.0499999999999998" -s mesh_position_x="0" -s wipe_retraction_extra_prime_amount="0" -s jerk_support_roof="20" -s machine_endstop_positive_direction_y="False" -s coasting_volume="0.064" -s machine_endstop_positive_direction_z="True" -s small_feature_speed_factor_0="50" -s infill_support_angle="40" -s raft_surface_jerk="20" -s support_interface_skip_height="0.3" -s mold_width="5" -s infill_before_walls="True" -s material="0" -s jerk_support_infill="20" -s wall_overhang_speed_factor="100" -s jerk_prime_tower="20" -s skin_outline_count="1" -s material_anti_ooze_retraction_speed="5" -s support_conical_enabled="False" -s bridge_skin_speed_2="10" -s retract_at_layer_change="False" -s raft_base_jerk="20" -s speed_wall_x="50" -s support_roof_material_flow="100" -s bridge_skin_density_2="75" -s brim_replaces_support="True" -s acceleration_support_infill="3000" -s brim_gap="0" -s travel_compensate_overlapping_walls_enabled="True" -s roofing_pattern="lines" -s travel_compensate_overlapping_walls_x_enabled="True" -s wall_line_width_0="0.35" -s cross_infill_pocket_size="7.0" -s raft_margin="5" -s support_bottom_stair_step_height="0.3" -s brim_outside_only="True" -s material_standby_temperature="175" -s speed_roofing="20" -s roofing_line_width="0.35" -s speed_support="37.5" -s ironing_inset="0.175" -s bridge_fan_speed_3="0" -s support_tree_branch_diameter_angle="5" -s support_infill_rate="15" -s infill_randomize_start_location="False" -s mesh_position_y="0" -s wall_line_count="3" -s magic_fuzzy_skin_point_density="1.25" -s platform_adhesion="0" -s support_bottom_stair_step_width="5.0" -s speed_z_hop="10" -s retraction_speed="40" -s wall_0_material_flow="100" -s cool_min_speed="10" -s bridge_skin_density="100" -s raft_base_line_width="0.8" -s machine_nozzle_offset_y="0" -s extruder_nr="0" -s infill_overlap="10" -s support_interface_material_flow="100" -s magic_mesh_surface_mode="normal" -s raft_fan_speed="0" -s raft_interface_line_width="0.7" -s material_surface_energy="100" -s retraction_extrusion_window="2.5" -s support_fan_enable="False" -s machine_extruder_start_pos_y="0" -s extruder_prime_pos_abs="False" -s material_adhesion_tendency="0" -s infill_sparse_thickness="0.13125" -s skin_no_small_gaps_heuristic="False" -s machine_nozzle_head_distance="3" -s support_brim_width="8.0" -s top_layers="6" -s material_break_preparation_temperature="200" -s layer_start_x="0.0" -s machine_min_cool_heat_time_window="50.0" -s support_bottom_line_distance="0.35" -s zig_zaggify_infill="False" -s wall_min_flow="0" -s ironing_flow="10.0" -s support_roof_offset="0.0" -s acceleration_support_roof="3000" -s acceleration_prime_tower="3000" -s skirt_gap="3" -s line_width="0.35" -s optimize_wall_printing_order="False" -s raft_acceleration="3000" -s support_bottom_height="1" -s raft_base_acceleration="3000" -s skirt_line_count="2" -s retraction_count_max="90" -s ironing_only_highest_layer="False" -s acceleration_topbottom="3000" -s machine_settings="0" -s small_hole_max_size="0" -s brim_line_count="15" -s support_roof_line_distance="0.35" -s infill_line_width="0.35" -s magic_fuzzy_skin_outside_only="False" -s prime_tower_line_width="0.35" -s jerk_print_layer_0="20" -s material_anti_ooze_retracted_position="-4" -s support_interface_angles="[ ]" -s bottom_thickness="0.72" -s speed_equalize_flow_max="150" -s jerk_roofing="20" -s minimum_roof_area="1.0" -s machine_extruder_cooling_fan_number="0" -s machine_nozzle_size="0.4" -s raft_interface_jerk="20" -s material_shrinkage_percentage="0" -s support_roof_density="100" -s spaghetti_max_height="2.0" -s bridge_skin_support_threshold="50" -s material_linear_advance_factor_topbottom="0" -s material_print_temperature="200" -s retraction_extra_prime_amount="0" -s default_material_print_temperature="200" -s roofing_layer_count="0" -s wall_0_inset="0.025000000000000022" -s brim_width="5" -s speed_support_infill="37.5" -s raft_base_line_spacing="1.6" -s max_extrusion_before_wipe="10" -s roofing_material_flow="100" -s prime_tower_flow="100" -s acceleration_ironing="3000" -s raft_interface_acceleration="3000" -s spaghetti_infill_stepped="True" -s raft_surface_fan_speed="0" -s jerk_print="20" -s z_seam_y="120" -s retraction_min_travel="0.7" -s acceleration_layer_0="3000" -s material_break_speed="25" -s ironing_line_spacing="0.1" -s raft_airgap="0.2625" -s material_flush_purge_speed="0.5" -s skin_line_width="0.35" -s machine_steps_per_mm_z="50" -s skin_angles="[ ]" -s skin_preshrink="1.0499999999999998" -s clean_between_layers="False" -s travel="0" -s raft_surface_thickness="0.13125" -s top_skin_preshrink="1.0499999999999998" -s jerk_support_interface="20" -s cross_infill_density_image="" -s support_interface_line_width="0.35" -s support_skip_zag_per_mm="20" -s support_bottom_angles="[ ]" -s ironing_pattern="zigzag" -s speed_travel="120" -s support_angle="50" -s raft_base_speed="18.75" -s layer_0_z_overlap="0.13125" -s top_skin_expand_distance="1.0499999999999998" -s sub_div_rad_add="0.35" -s z_seam_corner="z_seam_corner_inner" -s roofing_angles="[ ]" -s jerk_ironing="20" -s top_bottom_thickness="0.72" -s support_top_distance="0.1" -s retraction_hop_after_extruder_switch="True" -s jerk_topbottom="20" -s bridge_wall_coast="100" -s raft_interface_fan_speed="0" -s raft_interface_thickness="0.21875" -s meshfix_maximum_travel_resolution="0.7" -s machine_feeder_wheel_diameter="10.0" -s retraction_hop_only_when_collides="False" -s coasting_enable="True" -s mold_roof_height="0.5" -g -e0 -l "0" -s extruder_nr="0"
2020-02-29 11:03:14,047 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 11:03:14,050 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 11:03:14,093 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [663]: Slicing took 19.518763065338135 seconds
2020-02-29 11:03:14,093 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [664]: Number of models per buildplate: {0: 1}
2020-02-29 11:03:14,093 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [678]: See if there is more to slice...
2020-02-29 11:03:14,288 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [181]: Socket state changed to Closing
2020-02-29 11:03:14,291 - DEBUG - [MainThread] UM.Backend.Backend._onSocketError [203]: Socket debug: Arcus Error (13): Closing socket because other side requested close.
2020-02-29 11:03:14,294 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [183]: Socket state changed to Closed
2020-02-29 11:03:14,294 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onBackendQuit [829]: Backend quit with return code 0. Resetting process and socket.
2020-02-29 11:06:54,796 - DEBUG - [MainThread] LinearAdvanceSettingPlugin.LinearAdvanceSettingPlugin._filterGcode [109]: No used extruders specify a linear advance factor
2020-02-29 11:06:54,899 - DEBUG - [MainThread] UM.Controller.setActiveStage [149]: Setting active stage to MonitorStage
2020-02-29 11:06:54,958 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:211: Error: Cannot assign [undefined] to QString
2020-02-29 11:06:55,063 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._processRequest [308]: Request [f9743a5223b34119aca439cdd1c42f62] started
2020-02-29 11:06:55,067 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-02-29 11:06:55,607 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestFinished [369]: Request [f9743a5223b34119aca439cdd1c42f62] finished.
2020-02-29 11:06:55,611 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-02-29 11:06:55,612 - INFO - [MainThread] SliceInfoPlugin.SliceInfo._onRequestFinished [275]: SliceInfo sent successfully
2020-02-29 11:06:58,993 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-02-29 11:07:04,389 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [772]: Resource created on OctoPrint instance: http://192.168.2.171:5001/api/files/local/MSMV2E3D_Tweezer_Holder_11mm_Hole_1.0.gcode
2020-02-29 11:07:05,098 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-02-29 11:42:29,703 - DEBUG - [MainThread] UM.Controller.setActiveStage [149]: Setting active stage to PrepareStage
2020-02-29 11:42:29,751 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-02-29 11:42:29,817 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 11:42:29,820 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 11:42:29,829 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/plugins/plugins/PrepareStage/PrepareMain.qml:16:5: QML ActionPanelWidget: Binding loop detected for property "width"
2020-02-29 11:42:29,848 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:79: ReferenceError: stop is not defined
2020-02-29 11:42:29,851 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:63: TypeError: Cannot read property of null
2020-02-29 11:42:29,854 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:91: TypeError: Cannot read property of null
2020-02-29 11:42:29,856 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:102: TypeError: Cannot read property of null
2020-02-29 11:42:29,859 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:103: TypeError: Cannot read property of null
2020-02-29 11:42:29,861 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:139: TypeError: Cannot read property of null
2020-02-29 11:42:29,863 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:140: TypeError: Cannot read property of null
2020-02-29 11:42:29,866 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:120: TypeError: Cannot read property of null
2020-02-29 11:42:29,868 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:122: TypeError: Cannot read property of null
2020-02-29 11:42:29,871 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-02-29 11:42:29,874 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:36: TypeError: Cannot read property of null
2020-02-29 11:42:29,876 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:37: TypeError: Cannot read property of null
2020-02-29 11:42:29,878 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:49: TypeError: Cannot read property of null
2020-02-29 11:42:29,881 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:59: TypeError: Cannot read property of null
2020-02-29 11:42:29,883 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:61: TypeError: Cannot read property of null
2020-02-29 11:42:29,885 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:63: TypeError: Cannot read property of null
2020-02-29 11:42:29,888 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ExtruderBox.qml:20: TypeError: Cannot read property of null
2020-02-29 11:42:29,890 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:29: TypeError: Cannot read property of null
2020-02-29 11:42:29,893 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:30: TypeError: Cannot read property of null
2020-02-29 11:42:29,895 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:40: TypeError: Cannot read property of null
2020-02-29 11:42:29,898 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:73: TypeError: Cannot read property of null
2020-02-29 11:42:29,900 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:135: TypeError: Cannot read property of null
2020-02-29 11:42:29,902 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:246: TypeError: Cannot read property of null
2020-02-29 11:42:29,905 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:247: TypeError: Cannot read property of null
2020-02-29 11:42:29,907 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:173: TypeError: Cannot read property of null
2020-02-29 11:42:29,910 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:175: TypeError: Cannot read property of null
2020-02-29 11:42:29,912 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:190: TypeError: Cannot read property of null
2020-02-29 11:42:29,915 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:193: TypeError: Cannot read property of null
2020-02-29 11:42:29,918 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:60: TypeError: Cannot read property of null
2020-02-29 11:42:29,920 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:248: TypeError: Cannot read property of null
2020-02-29 11:42:29,923 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:294: TypeError: Cannot read property of null
2020-02-29 11:42:29,925 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:26: TypeError: Cannot read property of null
2020-02-29 11:42:29,927 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:27: TypeError: Cannot read property of null
2020-02-29 11:42:29,931 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:388: TypeError: Cannot read property of null
2020-02-29 11:42:29,934 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:390: TypeError: Cannot read property of null
2020-02-29 11:42:29,936 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:391: TypeError: Cannot read property of null
2020-02-29 11:42:29,939 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:26: TypeError: Cannot read property of null
2020-02-29 11:42:29,941 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:27: TypeError: Cannot read property of null
2020-02-29 11:42:29,943 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:24: TypeError: Cannot read property of null
2020-02-29 11:42:29,946 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:30: TypeError: Cannot read property of null
2020-02-29 11:42:29,949 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:39: TypeError: Cannot read property of null
2020-02-29 11:42:29,951 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:24: TypeError: Cannot read property of null
2020-02-29 11:42:29,953 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:30: TypeError: Cannot read property of null
2020-02-29 11:42:29,956 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:39: TypeError: Cannot read property of null
2020-02-29 11:42:29,958 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:24: TypeError: Cannot read property of null
2020-02-29 11:42:29,960 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:30: TypeError: Cannot read property of null
2020-02-29 11:42:29,963 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:39: TypeError: Cannot read property of null
2020-02-29 11:42:29,965 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupTooltip.qml:67: TypeError: Cannot read property of null
2020-02-29 11:42:29,967 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupTooltip.qml:69: TypeError: Cannot read property of null
2020-02-29 11:42:29,969 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupTooltip.qml:71: TypeError: Cannot read property of null
2020-02-29 11:42:29,972 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:150: TypeError: Cannot read property of null
2020-02-29 11:42:29,974 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-02-29 11:42:29,977 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:166: TypeError: Cannot read property of null
2020-02-29 11:42:29,979 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:167: TypeError: Cannot read property of null
2020-02-29 11:42:29,982 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:178: TypeError: Cannot read property of null
2020-02-29 11:42:29,984 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:231: TypeError: Cannot read property of null
2020-02-29 11:42:29,986 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:241: TypeError: Cannot read property of null
2020-02-29 11:42:32,597 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 11:42:32,601 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 11:42:32,727 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: PlatformPhysicsOp.(trans.=<0.0,-0.196,0.0>), took 0ms
2020-02-29 11:42:33,293 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: PlatformPhysicsOp.(trans.=<0.0,-0.196,0.0>), took 1ms
2020-02-29 11:42:34,655 - WARNING - [MainThread] cura.UI.PrintInformation.setBaseName [360]: Unsupported Mime Type Database file extension 
2020-02-29 11:42:40,142 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-02-29 11:42:45,330 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: GroupedOp.(#=1) <UM.Operations.RemoveSceneNodeOperation.RemoveSceneNodeOperation object at 0x60001450b918>, took 4ms
2020-02-29 11:42:46,122 - WARNING - [MainThread] cura.UI.PrintInformation.setBaseName [360]: Unsupported Mime Type Database file extension 
2020-02-29 11:42:48,998 - INFO - [MainThread] cura.UI.MachineActionManager.addDefaultMachineActions [56]: Default machine actions have been added for machine definition [wanhao_i3plus], do nothing.
2020-02-29 11:42:49,007 - WARNING - [MainThread] cura.Settings.GlobalStack.addExtruder [179]: Extruder [wanhao_i3plus_extruder_0 #3] has already been added to this stack [GreyLeader]
2020-02-29 11:42:49,010 - WARNING - [MainThread] cura.Settings.ExtruderManager.registerExtruder [156]: Extruder [wanhao_i3plus_extruder_0 #3] has already been registered on machine [GreyLeader], not doing anything
2020-02-29 11:42:49,013 - INFO - [MainThread] UM.Logger.info [112]: Initializing Active Machine...
2020-02-29 11:42:49,017 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-02-29 11:42:49,037 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device GreyLeader already added
2020-02-29 11:42:49,038 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [303]: Connection with instance GreyLeader with url http://192.168.2.156:80/ started
2020-02-29 11:42:49,052 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/SettingsMenu.qml:51: TypeError: Cannot read property 'isEnabled' of undefined
2020-02-29 11:42:49,054 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/SettingsMenu.qml:44: TypeError: Cannot read property 'isEnabled' of undefined
2020-02-29 11:42:49,058 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/MaterialMenu.qml:26: TypeError: Cannot read property 'isEnabled' of undefined
2020-02-29 11:42:49,061 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/MaterialMenu.qml:28: TypeError: Cannot read property 'material' of undefined
2020-02-29 11:42:49,064 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-02-29 11:42:49,118 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-02-29 11:42:49,134 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-02-29 11:42:49,137 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-02-29 11:42:49,749 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device GreyLeader already added
2020-02-29 11:42:49,752 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device GreyLeader already added
2020-02-29 11:42:49,771 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [135]: New error check scheduled.
2020-02-29 11:42:50,063 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-02-29 11:42:50,076 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [63]: Updating QualityProfilesDropDownMenuModel.
2020-02-29 11:42:50,641 - INFO - [MainThread] cura.Machines.MachineErrorChecker._setResult [187]: Error check finished, result = False, time = 0.9s
2020-02-29 11:42:51,050 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [741]: Set OctoPrint camera url to http://192.168.2.156:80/webcam/?action=stream
2020-02-29 11:42:59,143 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-02-29 11:43:04,352 - INFO - [Thread-5] STLReader.STLReader.load_file [51]: Using NumPy-STL to load STL data.
2020-02-29 11:43:04,359 - DEBUG - [Thread-5] UM.Mesh.MeshData.calculateNormalsFromVertices [495]: Calculating normals took 0.00013113021850585938 seconds
2020-02-29 11:43:04,359 - DEBUG - [Thread-5] STLReader.STLReader._read [102]: Loaded a mesh with 180 vertices
2020-02-29 11:43:04,363 - DEBUG - [Thread-5] UM.Mesh.MeshData.approximateConvexHull [452]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.0007588863372802734 seconds. 10 input vertices. 10 output vertices.
2020-02-29 11:43:04,368 - DEBUG - [Thread-5] UM.FileHandler.ReadFileJob.run [71]: Loading file took 0.0 seconds
2020-02-29 11:43:04,372 - DEBUG - [Thread-5] UM.Mesh.MeshData.approximateConvexHull [452]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.0006210803985595703 seconds. 10 input vertices. 10 output vertices.
2020-02-29 11:43:04,391 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: <UM.Operations.AddSceneNodeOperation.AddSceneNodeOperation object at 0x6000147aec58>, took 3ms
2020-02-29 11:43:07,256 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._terminate [292]: Attempting to kill the engine process
2020-02-29 11:43:07,262 - DEBUG - [MainThread] UM.Backend.Backend._createSocket [213]: Previous socket existed. Closing that first.
2020-02-29 11:43:07,270 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [173]: Socket state changed to Listening
2020-02-29 11:43:07,302 - INFO - [MainThread] UM.Backend.Backend.startEngine [81]: Started engine process: /Applications/Ultimaker Cura 3.app/Contents/MacOS/CuraEngine
2020-02-29 11:43:07,305 - DEBUG - [MainThread] UM.Backend.Backend._backendLog [101]: [Backend] Calling engine with: ['/Applications/Ultimaker Cura 3.app/Contents/MacOS/CuraEngine', 'connect', '127.0.0.1:49674', '']
2020-02-29 11:43:07,309 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-02-29 11:43:07,312 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] Cura_SteamEngine version 4.5.0
2020-02-29 11:43:07,315 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] Copyright (C) 2019 Ultimaker
2020-02-29 11:43:07,317 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-02-29 11:43:07,319 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] This program is free software: you can redistribute it and/or modify
2020-02-29 11:43:07,322 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] it under the terms of the GNU Affero General Public License as published by
2020-02-29 11:43:07,324 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] the Free Software Foundation, either version 3 of the License, or
2020-02-29 11:43:07,326 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] (at your option) any later version.
2020-02-29 11:43:07,329 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-02-29 11:43:07,332 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] This program is distributed in the hope that it will be useful,
2020-02-29 11:43:07,337 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] but WITHOUT ANY WARRANTY; without even the implied warranty of
2020-02-29 11:43:07,339 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [177]: Socket state changed to Connected
2020-02-29 11:43:07,343 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
2020-02-29 11:43:07,344 - DEBUG - [MainThread] UM.Backend.Backend._onSocketStateChanged [167]: Backend connected on port 49674
2020-02-29 11:43:07,347 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] GNU Affero General Public License for more details.
2020-02-29 11:43:07,351 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-02-29 11:43:07,357 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] You should have received a copy of the GNU Affero General Public License
2020-02-29 11:43:07,361 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] along with this program.  If not, see <http://www.gnu.org/licenses/>.
2020-02-29 11:43:07,368 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'JST Join Jig.stl'>,rot.=Q<-0.25881904510252074,-0.0,-0.0,w=0.9659258262890683>), took 3ms
2020-02-29 11:43:07,463 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'JST Join Jig.stl'>,rot.=Q<-0.7071067811865475,-0.0,-0.0,w=0.7071067811865476>), took 2ms
2020-02-29 11:43:07,564 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'JST Join Jig.stl'>,rot.=Q<-0.13052619222005157,-0.0,-0.0,w=0.9914448613738104>), took 2ms
2020-02-29 11:43:07,665 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'JST Join Jig.stl'>,rot.=Q<-0.13052619222005157,-0.0,-0.0,w=0.9914448613738104>), took 2ms
2020-02-29 11:43:07,766 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'JST Join Jig.stl'>,rot.=Q<-0.13052619222005157,-0.0,-0.0,w=0.9914448613738104>), took 2ms
2020-02-29 11:43:07,975 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'JST Join Jig.stl'>,rot.=Q<-0.13052619222005157,-0.0,-0.0,w=0.9914448613738104>), took 2ms
2020-02-29 11:43:09,808 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [225]: Starting to slice...
2020-02-29 11:43:09,808 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [243]: Going to slice build plate [0]!
2020-02-29 11:43:09,820 - WARNING - [Thread-6] UM.Decorators.deprecated_function [20]: <function GlobalStack.extruders at 0x600006f04c78> is deprecated (since 4.4): Please use extruderList instead.
2020-02-29 11:43:10,126 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onStartSliceCompleted [429]: Sending slice message took 0.31770801544189453 seconds
2020-02-29 11:43:10,322 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING]  -s extruders_enabled_count="1" -s support_interface_density="100" -s cool_fan_speed="100.0" -s raft_base_thickness="0.36" -s bridge_skin_material_flow="60" -s slicing_tolerance="middle" -s material_end_of_filament_purge_speed="0.5" -s prime_tower_size="20" -s retraction_retract_speed="25" -s speed_layer_0="30.0" -s infill="0" -s small_feature_speed_factor="50" -s speed_prime_tower="60" -s support_brim_enable="False" -s infill_multiplier="1" -s gradual_support_infill_steps="0" -s initial_extruder_nr="0" -s infill_extruder_nr="-1" -s infill_sparse_density="20" -s bottom_skin_expand_distance="0.8" -s machine_nozzle_cool_down_speed="2.0" -s infill_offset_x="0" -s machine_depth="190" -s adhesion_z_offset_extensive_processing="False" -s limit_support_retractions="True" -s machine_max_acceleration_y="9000" -s infill_offset_y="0" -s acceleration_print_layer_0="3000" -s wall_min_flow_retract="False" -s speed_support_roof="20.0" -s xy_offset_layer_0="0" -s adhesion_type="skirt" -s z_seam_position="back" -s material_guid="" -s magic_spiralize="False" -s material_linear_advance_factor_support_interface="0" -s machine_max_acceleration_x="9000" -s material_linear_advance_factor_infill="0" -s print_temperature="210" -s skin_angles="[ ]" -s gradual_support_infill_step_height="1" -s support_conical_angle="30" -s raft_surface_acceleration="3000" -s jerk_layer_0="20" -s machine_max_feedrate_x="299792458000" -s support_pattern="lines" -s jerk_infill="20" -s speed_equalize_flow_enabled="False" -s top_thickness="0.8" -s bottom_skin_preshrink="0.8" -s raft_surface_line_spacing="0.4" -s wall_line_width="0.4" -s xy_offset="0" -s alternate_carve_order="True" -s travel_avoid_other_parts="True" -s raft_interface_speed="22.5" -s travel_avoid_distance="0.625" -s support_interface_height="1" -s jerk_travel_layer_0="30.0" -s date="29-02-2020" -s wireframe_flow="100" -s machine_acceleration="4000" -s machine_minimum_feedrate="0.0" -s skin_preshrink="0.8" -s jerk_wall="20" -s retract_at_layer_change="False" -s jerk_travel="30" -s support_skip_some_zags="False" -s minimum_roof_area="1.0" -s wireframe_flow_connection="100" -s bridge_skin_density="100" -s skirt_brim_line_width="0.4" -s top_bottom_pattern="lines" -s travel_compensate_overlapping_walls_0_enabled="True" -s flow_rate_max_extrusion_offset="0" -s material_diameter="2.85" -s support_bottom_line_width="0.4" -s raft_smoothing="5" -s speed_topbottom="30.0" -s wireframe_drag_along="0.6" -s material_break_speed="25" -s raft_interface_acceleration="3000" -s minimum_polygon_circumference="1.0" -s support_interface_skip_height="0.3" -s speed_print="60" -s skin_edge_support_layers="0" -s support_type="buildplate" -s support_roof_line_width="0.4" -s wireframe_printspeed_bottom="5" -s raft_surface_line_width="0.4" -s prime_tower_min_volume="6" -s prime_blob_enable="False" -s switch_extruder_prime_speed="20" -s wall_x_extruder_nr="-1" -s machine_steps_per_mm_z="50" -s smooth_spiralized_contours="True" -s ooze_shield_dist="2" -s bridge_wall_material_flow="50" -s cool_fan_full_layer="2" -s roofing_material_flow="100" -s wipe_hop_speed="10" -s infill_angles="[ ]" -s infill_line_distance="4.0" -s minimum_bottom_area="1.0" -s minimum_support_area="0.0" -s material_linear_advance_factor_wall_0="0" -s wall_0_wipe_dist="0.2" -s switch_extruder_extra_prime_amount="0" -s material_extrusion_cool_down_speed="0.7" -s wall_x_material_flow="100" -s support_xy_distance_overhang="0.2" -s wireframe_printspeed_up="5" -s resolution="0" -s retraction_hop="1" -s jerk_wall_0="20" -s skin_material_flow="100" -s support_bottom_density="100" -s jerk_support_interface="20" -s material_print_temperature_layer_0="210" -s retraction_min_travel="0.8" -s support_xy_overrides_z="z_overrides_xy" -s min_infill_area="0" -s machine_nozzle_tip_outer_diameter="1" -s machine_steps_per_mm_x="50" -s material_break_preparation_temperature="210" -s machine_nozzle_size="0.4" -s support_initial_layer_line_distance="0" -s center_object="False" -s spaghetti_inset="0.2" -s mold_enabled="False" -s acceleration_travel="5000" -s acceleration_wall="3000" -s support_bottom_material_flow="100" -s ironing_enabled="False" -s cooling="0" -s support_infill_angles="[ ]" -s shell="0" -s bridge_skin_material_flow_2="100" -s speed_support_interface="40.0" -s meshfix="0" -s acceleration_skirt_brim="3000" -s support_line_distance="0" -s retraction_enable="True" -s retraction_hop_enabled="False" -s switch_extruder_retraction_speed="20" -s acceleration_roofing="3000" -s anti_overhang_mesh="False" -s cool_min_layer_time_fan_speed_max="10" -s wipe_retraction_speed="25" -s retraction_amount="6.5" -s retraction_combing="all" -s material_flow_layer_0="100" -s wall_material_flow="100" -s extruder_prime_pos_z="0" -s support_tower_roof_angle="65" -s connect_skin_polygons="False" -s infill_pattern="grid" -s magic_fuzzy_skin_thickness="0.3" -s meshfix_extensive_stitching="False" -s infill_wipe_dist="0.1" -s skirt_brim_material_flow="100" -s bridge_skin_speed="15.0" -s mesh_position_x="0" -s prime_tower_position_y="165.6" -s jerk_wall_x="20" -s support_bottom_extruder_nr="0" -s support_roof_height="1.2" -s cutting_mesh="False" -s machine_max_jerk_xy="20.0" -s support_material_flow="100" -s bridge_fan_speed="100" -s support_line_width="0.4" -s ooze_shield_enabled="False" -s support_extruder_nr="0" -s wall_thickness="0.8" -s support_bottom_distance="0" -s material_crystallinity="False" -s machine_steps_per_mm_e="1600" -s dual="0" -s support_bottom_enable="False" -s wireframe_nozzle_clearance="1" -s speed_infill="60" -s machine_nozzle_id="unknown" -s wipe_brush_pos_x="100" -s acceleration_travel_layer_0="5000.0" -s meshfix_maximum_deviation="0.05" -s cool_fan_enabled="True" -s wall_overhang_angle="90" -s cool_fan_speed_max="100.0" -s raft_surface_layers="2" -s skirt_brim_minimal_length="250" -s material_linear_advance_factor="0" -s cool_min_layer_time="5" -s day="Sat" -s wipe_retraction_enable="True" -s travel_avoid_supports="False" -s acceleration_infill="3000" -s material_bed_temperature="66" -s bridge_skin_material_flow_3="110" -s bridge_fan_speed_2="0" -s initial_bottom_layers="8" -s support_interface_pattern="concentric" -s cross_infill_density_image="" -s adaptive_layer_height_variation="0.1" -s infill_wall_line_count="0" -s support_supported_skin_fan_speed="100" -s extruder_prime_pos_y="0" -s machine_name="Wanhao Duplicator i3 Plus" -s retraction_prime_speed="25" -s material_linear_advance_factor_prime_tower="0" -s z_seam_type="sharpest_corner" -s meshfix_keep_open_polygons="False" -s support_use_towers="True" -s infill_support_enabled="False" -s cool_fan_speed_0="0" -s support_brim_line_count="20" -s blackmagic="0" -s material_print_temp_wait="True" -s support_roof_angles="[ ]" -s infill_mesh_order="0" -s support="0" -s spaghetti_infill_enabled="False" -s acceleration_support="3000" -s support_interface_offset="0.0" -s support_tree_enable="True" -s acceleration_wall_0="3000" -s wireframe_top_jump="0.6" -s jerk_support_bottom="20" -s speed_support_bottom="20.0" -s support_conical_min_width="5.0" -s bottom_layers="8" -s material_flow_dependent_temperature="False" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s support_wall_count="1" -s machine_max_acceleration_z="100" -s skin_edge_support_thickness="0" -s coasting_min_volume="0.8" -s material_linear_advance_factor_wall="0" -s cool_fan_full_at_height="0.3" -s draft_shield_dist="10" -s layer_height="0.1" -s material_break_preparation_retracted_position="-16" -s infill_mesh="False" -s mold_angle="40" -s raft_speed="30.0" -s machine_max_jerk_z="0.4" -s support_tree_angle="40" -s wall_line_width_0="0.4" -s cross_infill_pocket_size="4.0" -s machine_max_jerk_e="5.0" -s raft_margin="15" -s raft_surface_speed="30.0" -s infill_enable_travel_optimization="False" -s machine_height="180" -s travel_retract_before_outer_wall="False" -s infill_support_angle="40" -s adaptive_layer_height_variation_step="0.01" -s raft_surface_jerk="20" -s bridge_sparse_infill_max_density="0" -s wireframe_printspeed_flat="5" -s draft_shield_height_limitation="full" -s magic_fuzzy_skin_enabled="False" -s jerk_enabled="False" -s support_mesh_drop_down="True" -s wireframe_roof_fall_down="2" -s wireframe_strategy="compensate" -s machine_gcode_flavor="RepRap (Marlin/Sprinter)" -s conical_overhang_angle="50" -s infill_overlap_mm="0.04" -s mesh_position_z="0" -s travel_speed="120" -s speed="0" -s small_hole_max_size="0" -s material_bed_temp_prepend="True" -s material="0" -s infill_before_walls="True" -s meshfix_maximum_resolution="0.5" -s wipe_repeat_count="5" -s support_tree_branch_distance="1" -s retraction_speed="25" -s gradual_infill_steps="0" -s machine_show_variants="False" -s support_interface_material_flow="100" -s infill_overlap="10" -s jerk_support="20" -s wall_line_width_x="0.4" -s roofing_extruder_nr="-1" -s raft_base_acceleration="3000" -s wall_extruder_nr="-1" -s adaptive_layer_height_threshold="0.2" -s min_skin_width_for_expansion="4.898587196589413e-17" -s material_no_load_move_factor="0.940860215" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s max_skin_angle_for_expansion="90" -s sub_div_rad_add="0.4" -s support_tree_branch_diameter_angle="5" -s top_bottom_pattern_0="lines" -s alternate_extra_perimeter="False" -s support_roof_enable="True" -s bridge_wall_coast="100" -s raft_interface_fan_speed="0" -s support_offset="0" -s wireframe_fall_down="0.5" -s material_flow="100" -s cross_support_density_image="" -s wireframe_height="3" -s z_seam_relative="False" -s support_tower_maximum_supported_diameter="3.0" -s support_interface_extruder_nr="0" -s nozzle_disallowed_areas="[]" -s support_xy_distance="0.7" -s speed_wall="30.0" -s bridge_enable_more_layers="True" -s conical_overhang_enabled="False" -s speed_travel_layer_0="60.0" -s draft_shield_height="10" -s z_seam_x="100.0" -s retraction_combing_max_distance="0" -s support_infill_rate="0" -s spaghetti_max_infill_angle="10" -s acceleration_support_interface="3000" -s machine_feeder_wheel_diameter="10.0" -s retraction_hop_only_when_collides="False" -s extruder_prime_pos_x="0" -s build_volume_temperature="28" -s layer_start_y="0.0" -s material_break_retracted_position="-50" -s material_initial_print_temperature="200" -s support_infill_extruder_nr="0" -s coasting_speed="90" -s carve_multiple_volumes="False" -s flow_rate_extrusion_offset_factor="100" -s acceleration_wall_x="3000" -s skin_overlap_mm="0.02" -s small_feature_max_length="0.0" -s wall_0_extruder_nr="-1" -s material_maximum_park_duration="300" -s machine_nozzle_temp_enabled="True" -s switch_extruder_retraction_amount="16" -s skirt_brim_speed="30.0" -s wipe_retraction_extra_prime_amount="0" -s ironing_only_highest_layer="False" -s acceleration_topbottom="3000" -s machine_settings="0" -s adhesion_extruder_nr="0" -s mold_width="5" -s jerk_support_infill="20" -s wall_overhang_speed_factor="100" -s jerk_prime_tower="20" -s skin_outline_count="1" -s bridge_skin_speed_2="15.0" -s machine_max_feedrate_y="299792458000" -s support_roof_material_flow="100" -s bridge_skin_density_2="75" -s support_tower_diameter="3.0" -s material_linear_advance_factor_support="0" -s command_line_settings="0" -s brim_replaces_support="True" -s prime_tower_wipe_enabled="True" -s fill_perimeter_gaps="everywhere" -s skin_overlap="5" -s print_sequence="all_at_once" -s acceleration_support_infill="3000" -s brim_gap="0" -s spaghetti_infill_extra_volume="0" -s support_connect_zigzags="True" -s adaptive_layer_height_enabled="False" -s travel_compensate_overlapping_walls_enabled="True" -s roofing_pattern="lines" -s fill_outline_gaps="False" -s support_zag_skip_count="0" -s machine_filament_park_distance="16" -s acceleration_print="3000" -s material_linear_advance_factor_wall_x="0" -s material_final_print_temperature="195" -s ooze_shield_angle="60" -s machine_endstop_positive_direction_x="False" -s travel_compensate_overlapping_walls_x_enabled="True" -s coasting_volume="0.064" -s machine_endstop_positive_direction_z="True" -s small_feature_speed_factor_0="50" -s machine_shape="rectangular" -s machine_heated_bed="True" -s machine_use_extruder_offset_to_offset_coords="True" -s brim_outside_only="True" -s material_standby_temperature="150" -s support_bottom_stair_step_height="0.3" -s speed_roofing="30.0" -s roofing_line_width="0.4" -s material_print_temp_prepend="True" -s wireframe_printspeed_down="5" -s minimum_interface_area="1.0" -s draft_shield_enabled="False" -s speed_support="60" -s adhesion_z_offset="0" -s wireframe_roof_outer_delay="0.2" -s ironing_inset="0.2" -s bridge_fan_speed_3="0" -s initial_layer_line_width_factor="100.0" -s machine_start_gcode="" -s experimental="0" -s bridge_wall_min_length="5" -s prime_tower_position_x="195.6" -s wipe_retraction_amount="6.5" -s material_break_temperature="50" -s top_bottom_extruder_nr="-1" -s acceleration_support_roof="3000" -s support_roof_offset="0.0" -s wall_0_material_flow="100" -s wireframe_flow_flat="100" -s speed_print_layer_0="30.0" -s default_material_bed_temperature="60" -s raft_jerk="20" -s machine_end_gcode="" -s machine_center_is_zero="False" -s support_conical_enabled="False" -s material_anti_ooze_retraction_speed="5" -s machine_head_with_fans_polygon="[[-20, 10], [10, 10], [10, -10], [-20, -10]]" -s z_seam_corner="z_seam_corner_inner" -s support_interface_angles="[ ]" -s bottom_thickness="0.8" -s raft_interface_line_spacing="1.0" -s material_flush_purge_length="60" -s machine_nozzle_heat_up_speed="2.0" -s cool_fan_speed_min="100.0" -s wipe_move_distance="20" -s bridge_skin_speed_3="15.0" -s magic_fuzzy_skin_point_dist="0.8" -s filter_out_tiny_gaps="True" -s spaghetti_flow="20" -s machine_heated_build_volume="False" -s extruder_prime_pos_abs="False" -s material_adhesion_tendency="10" -s infill_sparse_thickness="0.1" -s speed_wall_0="30.0" -s machine_extruders_share_heater="False" -s cool_lift_head="False" -s zig_zaggify_infill="False" -s acceleration_enabled="False" -s support_roof_extruder_nr="0" -s layer_start_x="0.0" -s machine_min_cool_heat_time_window="50.0" -s multiple_mesh_overlap="0.15" -s wipe_retraction_retract_speed="25" -s support_bottom_pattern="concentric" -s material_break_preparation_speed="2" -s acceleration_support_bottom="3000" -s material_end_of_filament_purge_length="20" -s wireframe_roof_drag_along="0.8" -s support_bottom_line_distance="0.4" -s wall_min_flow="0" -s ironing_flow="10.0" -s acceleration_prime_tower="3000" -s retraction_hop_after_extruder_switch_height="1" -s skirt_gap="3" -s speed_ironing="20.0" -s machine_max_acceleration_e="10000" -s line_width="0.4" -s zig_zaggify_support="False" -s wipe_hop_enable="False" -s optimize_wall_printing_order="False" -s raft_interface_line_width="0.8" -s gantry_height="180" -s material_surface_energy="100" -s print_bed_temperature="66" -s magic_mesh_surface_mode="normal" -s raft_fan_speed="0" -s wireframe_up_half_speed="0.3" -s machine_max_feedrate_e="299792458000" -s spaghetti_infill_stepped="True" -s raft_surface_fan_speed="0" -s meshfix_union_all_remove_holes="False" -s speed_wall_x="60.0" -s raft_base_jerk="20" -s machine_extruder_count="1" -s jerk_support_roof="20" -s wireframe_top_delay="0" -s machine_endstop_positive_direction_y="False" -s jerk_topbottom="20" -s remove_empty_first_layers="True" -s support_bottom_height="1" -s raft_acceleration="3000" -s jerk_print_layer_0="20" -s wireframe_roof_inset="3" -s material_anti_ooze_retracted_position="-4" -s expand_skins_expand_distance="0.8" -s bridge_wall_speed="15.0" -s support_bottom_offset="0.0" -s wireframe_flat_delay="0.1" -s machine_nozzle_expansion_angle="45" -s brim_line_count="8" -s support_roof_line_distance="0.4" -s prime_tower_line_width="0.4" -s infill_line_width="0.4" -s magic_fuzzy_skin_outside_only="False" -s speed_equalize_flow_max="150" -s jerk_roofing="20" -s raft_base_line_width="0.8" -s coasting_enable="False" -s support_interface_line_width="0.4" -s support_bottom_angles="[ ]" -s support_skip_zag_per_mm="20" -s support_extruder_nr_layer_0="0" -s meshfix_maximum_travel_resolution="0.8" -s cool_min_speed="10" -s machine_disallowed_areas="[]" -s support_interface_enable="False" -s bridge_skin_density_3="80" -s machine_max_feedrate_z="299792458000" -s support_roof_density="100" -s spaghetti_max_height="2.0" -s skirt_line_count="4" -s retraction_count_max="90" -s retraction_extrusion_window="6.5" -s support_fan_enable="False" -s support_roof_pattern="concentric" -s support_mesh="False" -s wireframe_straight_before_down="20" -s material_print_temperature="210" -s retraction_extra_prime_amount="0" -s wireframe_printspeed="5" -s machine_steps_per_mm_y="50" -s support_tree_branch_diameter="2" -s speed_slowdown_layers="2" -s default_material_print_temperature="210" -s roofing_layer_count="0" -s relative_extrusion="False" -s wall_0_inset="0" -s brim_width="8.0" -s speed_support_infill="60" -s raft_base_line_spacing="1.6" -s max_extrusion_before_wipe="10" -s ironing_pattern="zigzag" -s speed_travel="120" -s support_angle="70" -s raft_base_speed="22.5" -s layer_0_z_overlap="0.15" -s speed_z_hop="10" -s platform_adhesion="0" -s support_bottom_stair_step_width="5.0" -s raft_interface_jerk="20" -s material_shrinkage_percentage="0" -s ironing_line_spacing="0.1" -s skin_line_width="0.4" -s connect_infill_polygons="False" -s wireframe_bottom_delay="0" -s mesh_position_y="0" -s infill_randomize_start_location="False" -s machine_nozzle_head_distance="3" -s support_brim_width="8.0" -s top_layers="8" -s support_infill_sparse_thickness="0.1" -s material_bed_temperature_layer_0="66" -s clean_between_layers="False" -s travel="0" -s material_bed_temp_wait="True" -s raft_airgap="0.3" -s material_flush_purge_speed="0.5" -s support_enable="False" -s prime_tower_enable="False" -s raft_surface_thickness="0.1" -s jerk_skirt_brim="20" -s machine_heat_zone_length="16" -s gradual_infill_step_height="1.5" -s outer_inset_first="False" -s prime_tower_brim_enable="False" -s top_skin_preshrink="0.8" -s top_skin_expand_distance="0.8" -s jerk_print="20" -s mold_roof_height="0.5" -s jerk_ironing="20" -s roofing_angles="[ ]" -s support_top_distance="0.1" -s retraction_hop_after_extruder_switch="True" -s material_linear_advance_factor_skirt_brim="0" -s layer_height_0="0.3" -s switch_extruder_retraction_speeds="20" -s machine_firmware_retract="False" -s meshfix_union_all="True" -s support_z_distance="0.1" -s bridge_settings_enabled="False" -s z_seam_y="190" -s acceleration_layer_0="3000" -s raft_interface_thickness="0.15000000000000002" -s wall_line_count="2" -s magic_fuzzy_skin_point_density="1.25" -s top_bottom_thickness="0.8" -s machine_width="200" -s prime_tower_flow="100" -s acceleration_ironing="3000" -s raft_base_fan_speed="0" -s support_tree_collision_resolution="0.2" -s skin_no_small_gaps_heuristic="False" -s wipe_hop_amount="1" -s support_join_distance="2.0" -s machine_buildplate_type="glass" -s time="11:43:09" -s infill_material_flow="100" -s wireframe_enabled="False" -s material_linear_advance_factor_topbottom="0" -s wipe_retraction_prime_speed="25" -s wipe_pause="0" -s bridge_skin_support_threshold="50" -e0 -s switch_extruder_retraction_speeds="20" -s support_interface_density="100" -s cool_fan_speed="80" -s raft_base_thickness="0.36" -s machine_nozzle_offset_x="0" -s initial_layer_line_width_factor="100.0" -s bridge_skin_material_flow="60" -s material_end_of_filament_purge_speed="0.5" -s retraction_retract_speed="40" -s speed_layer_0="12" -s infill="0" -s small_feature_speed_factor="50" -s support_infill_sparse_thickness="0.1" -s speed_prime_tower="30" -s support_brim_enable="False" -s infill_multiplier="1" -s gradual_support_infill_steps="0" -s infill_sparse_density="64" -s bottom_skin_expand_distance="2.4" -s machine_nozzle_cool_down_speed="2.0" -s infill_offset_x="0" -s limit_support_retractions="True" -s machine_extruder_end_pos_x="0" -s infill_offset_y="0" -s acceleration_print_layer_0="3000" -s wall_min_flow_retract="False" -s speed_support_roof="20.0" -s xy_offset_layer_0="0" -s z_seam_position="back" -s material_guid="0ff92885-617b-4144-a03c-9989872454bc" -s material_linear_advance_factor_support_interface="0" -s material_linear_advance_factor_infill="0" -s material_break_preparation_speed="2" -s acceleration_support_bottom="3000" -s material_end_of_filament_purge_length="20" -s gradual_support_infill_step_height="1" -s support_conical_angle="30" -s raft_surface_acceleration="3000" -s support_roof_pattern="concentric" -s jerk_layer_0="20" -s support_pattern="lines" -s jerk_infill="20" -s speed_equalize_flow_enabled="False" -s top_thickness="0.8" -s bottom_skin_preshrink="2.4" -s raft_surface_line_spacing="0.4" -s skin_edge_support_layers="0" -s wall_line_width="0.4" -s xy_offset="0" -s travel_avoid_other_parts="True" -s raft_interface_speed="11.25" -s travel_avoid_distance="0.625" -s support_interface_height="1" -s wipe_move_distance="20" -s cool_fan_speed_min="80" -s acceleration_skirt_brim="3000" -s meshfix="0" -s support_bottom_material_flow="100" -s acceleration_wall="3000" -s ironing_enabled="False" -s acceleration_travel="5000" -s support_supported_skin_fan_speed="100" -s infill_wall_line_count="0" -s support_wall_count="1" -s skin_edge_support_thickness="0" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s experimental="0" -s support_skip_some_zags="False" -s travel_compensate_overlapping_walls_0_enabled="True" -s support_bottom_line_width="0.4" -s material_flow="100" -s support_offset="0" -s raft_smoothing="5" -s speed_topbottom="15.0" -s wipe_hop_enable="False" -s zig_zaggify_support="False" -s speed_print="30" -s prime_tower_min_volume="6" -s jerk_travel="30" -s material_linear_advance_factor_skirt_brim="0" -s support_tree_branch_diameter="2" -s machine_steps_per_mm_y="50" -s acceleration_support_interface="3000" -s spaghetti_max_infill_angle="10" -s bridge_wall_material_flow="50" -s wipe_hop_speed="10" -s jerk_wall_0="20" -s retraction_hop="1" -s wipe_pause="0" -s wipe_retraction_prime_speed="40" -s minimum_support_area="0.0" -s material_linear_advance_factor_wall_0="0" -s wall_0_wipe_dist="0.2" -s switch_extruder_extra_prime_amount="0" -s support_tower_maximum_supported_diameter="3.0" -s spaghetti_infill_extra_volume="0" -s support_connect_zigzags="True" -s support_xy_distance_overhang="0.2" -s bridge_skin_density_3="80" -s support_interface_enable="False" -s resolution="0" -s support_line_width="0.4" -s material_break_preparation_retracted_position="-16" -s support_xy_overrides_z="z_overrides_xy" -s min_infill_area="0" -s machine_nozzle_tip_outer_diameter="1" -s machine_steps_per_mm_x="50" -s infill_angles="[ ]" -s minimum_interface_area="1.0" -s skirt_brim_line_width="0.4" -s top_bottom_pattern="lines" -s cool_fan_full_layer="2" -s center_object="False" -s spaghetti_inset="0.2" -s gradual_infill_steps="0" -s jerk_travel_layer_0="30.0" -s mold_enabled="False" -s raft_surface_line_width="0.4" -s cooling="0" -s support_tree_collision_resolution="0.2" -s raft_base_fan_speed="0" -s material_print_temperature_layer_0="220" -s raft_interface_line_spacing="1.0" -s machine_nozzle_heat_up_speed="2.0" -s material_flush_purge_length="60" -s bridge_skin_material_flow_2="100" -s speed_support_interface="20.0" -s support_interface_offset="0.0" -s jerk_support="20" -s wall_line_width_x="0.4" -s support_line_distance="0" -s retraction_enable="True" -s switch_extruder_retraction_speed="20" -s retraction_hop_enabled="False" -s acceleration_roofing="3000" -s cool_min_layer_time_fan_speed_max="10" -s wipe_retraction_speed="40" -s retraction_amount="2.5" -s raft_speed="15.0" -s mold_angle="40" -s material_flow_layer_0="100" -s wall_material_flow="100" -s bridge_skin_material_flow_3="110" -s bridge_fan_speed_2="0" -s initial_bottom_layers="6" -s support_interface_pattern="concentric" -s connect_skin_polygons="False" -s infill_pattern="gyroid" -s material_flow_dependent_temperature="False" -s bottom_layers="6" -s magic_fuzzy_skin_thickness="0.3" -s meshfix_extensive_stitching="False" -s infill_wipe_dist="0.1" -s machine_extruder_start_pos_abs="False" -s skirt_brim_material_flow="100" -s bridge_skin_speed="10" -s jerk_wall_x="20" -s wipe_retraction_amount="2.5" -s material_break_temperature="50" -s support_roof_height="1.2" -s magic_fuzzy_skin_enabled="False" -s connect_infill_polygons="False" -s machine_extruder_start_code="" -s support_material_flow="100" -s bridge_fan_speed="100" -s bridge_sparse_infill_max_density="0" -s wall_thickness="0.8" -s support_bottom_distance="0" -s material_crystallinity="False" -s machine_steps_per_mm_e="1600" -s jerk_wall="20" -s dual="0" -s support_bottom_enable="False" -s skin_overlap="5" -s speed_infill="30" -s machine_nozzle_id="unknown" -s wipe_brush_pos_x="100" -s acceleration_travel_layer_0="5000.0" -s raft_surface_layers="2" -s skirt_brim_minimal_length="250" -s material_linear_advance_factor="0" -s cool_min_layer_time="5" -s wipe_retraction_enable="True" -s travel_avoid_supports="False" -s acceleration_infill="3000" -s speed_ironing="10.0" -s support_roof_line_width="0.4" -s extruder_prime_pos_y="0" -s material_linear_advance_factor_prime_tower="0" -s retraction_prime_speed="40" -s z_seam_type="sharpest_corner" -s prime_blob_enable="False" -s meshfix_keep_open_polygons="False" -s raft_surface_speed="15.0" -s infill_enable_travel_optimization="False" -s machine_nozzle_temp_enabled="True" -s switch_extruder_retraction_amount="16" -s skirt_brim_speed="12" -s material_maximum_park_duration="300" -s infill_material_flow="100" -s support_use_towers="True" -s infill_support_enabled="False" -s cool_fan_speed_0="0" -s support_brim_line_count="20" -s blackmagic="0" -s multiple_mesh_overlap="0.15" -s wipe_retraction_retract_speed="40" -s material_linear_advance_factor_wall_x="0" -s acceleration_print="3000" -s support_bottom_pattern="concentric" -s meshfix_maximum_deviation="0.05" -s cool_fan_enabled="True" -s wall_overhang_angle="90" -s cool_fan_speed_max="80" -s machine_extruder_end_code="" -s support_roof_angles="[ ]" -s retraction_hop_after_extruder_switch_height="1" -s machine_extruder_end_pos_abs="False" -s support="0" -s spaghetti_infill_enabled="False" -s acceleration_support="3000" -s acceleration_wall_0="3000" -s jerk_support_bottom="20" -s material_extrusion_cool_down_speed="0.7" -s speed_support_bottom="20.0" -s support_conical_min_width="5.0" -s coasting_min_volume="0.8" -s material_linear_advance_factor_wall="0" -s cool_fan_full_at_height="0.3" -s support_infill_angles="[ ]" -s shell="0" -s support_tower_diameter="3.0" -s machine_extruder_start_pos_x="0" -s wipe_hop_amount="1" -s support_join_distance="2.0" -s support_tree_angle="40" -s fill_perimeter_gaps="everywhere" -s prime_tower_wipe_enabled="True" -s machine_heat_zone_length="16" -s jerk_skirt_brim="20" -s raft_jerk="20" -s speed_print_layer_0="12" -s command_line_settings="0" -s material_linear_advance_factor_support="0" -s conical_overhang_angle="50" -s infill_overlap_mm="0.05600000000000001" -s mesh_position_z="0" -s speed="0" -s material_diameter="1.75" -s meshfix_union_all_remove_holes="False" -s gradual_infill_step_height="1.5" -s cool_lift_head="False" -s speed_wall_0="15.0" -s outer_inset_first="False" -s extruder_prime_pos_z="0" -s support_tower_roof_angle="65" -s meshfix_maximum_resolution="0.5" -s wipe_repeat_count="5" -s support_tree_branch_distance="1" -s wall_x_material_flow="100" -s min_skin_width_for_expansion="3.67394039744206e-17" -s material_no_load_move_factor="0.940860215" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s max_skin_angle_for_expansion="90" -s top_bottom_pattern_0="lines" -s alternate_extra_perimeter="False" -s support_roof_enable="True" -s slicing_tolerance="exclusive" -s machine_extruder_end_pos_y="0" -s cross_support_density_image="" -s z_seam_relative="False" -s support_xy_distance="0.7" -s speed_wall="15.0" -s material_final_print_temperature="205" -s machine_endstop_positive_direction_x="False" -s bridge_enable_more_layers="True" -s conical_overhang_enabled="False" -s speed_travel_layer_0="60.0" -s fill_outline_gaps="False" -s machine_filament_park_distance="16" -s support_zag_skip_count="0" -s material_break_retracted_position="-50" -s material_initial_print_temperature="210" -s switch_extruder_prime_speed="20" -s extruder_prime_pos_x="0" -s layer_start_y="0.0" -s filter_out_tiny_gaps="True" -s bridge_skin_speed_3="10" -s spaghetti_flow="20" -s magic_fuzzy_skin_point_dist="0.8" -s coasting_speed="90" -s skin_material_flow="100" -s support_bottom_density="100" -s acceleration_wall_x="3000" -s skin_overlap_mm="0.02" -s small_feature_max_length="0.0" -s support_initial_layer_line_distance="0" -s support_bottom_offset="0.0" -s bridge_wall_speed="10" -s meshfix_union_all="True" -s support_z_distance="0.1" -s infill_line_distance="0.625" -s minimum_bottom_area="1.0" -s retraction_combing_max_distance="0" -s z_seam_x="100.0" -s expand_skins_expand_distance="2.4" -s mesh_position_x="0" -s wipe_retraction_extra_prime_amount="0" -s jerk_support_roof="20" -s machine_endstop_positive_direction_y="False" -s coasting_volume="0.064" -s machine_endstop_positive_direction_z="True" -s small_feature_speed_factor_0="50" -s infill_support_angle="40" -s raft_surface_jerk="20" -s support_interface_skip_height="0.3" -s mold_width="5" -s infill_before_walls="True" -s material="0" -s jerk_support_infill="20" -s wall_overhang_speed_factor="100" -s jerk_prime_tower="20" -s skin_outline_count="1" -s material_anti_ooze_retraction_speed="5" -s support_conical_enabled="False" -s bridge_skin_speed_2="10" -s retract_at_layer_change="False" -s raft_base_jerk="20" -s speed_wall_x="30.0" -s support_roof_material_flow="100" -s bridge_skin_density_2="75" -s brim_replaces_support="True" -s acceleration_support_infill="3000" -s brim_gap="0" -s travel_compensate_overlapping_walls_enabled="True" -s roofing_pattern="lines" -s travel_compensate_overlapping_walls_x_enabled="True" -s wall_line_width_0="0.4" -s cross_infill_pocket_size="0.625" -s raft_margin="15" -s support_bottom_stair_step_height="0.3" -s brim_outside_only="True" -s material_standby_temperature="175" -s speed_roofing="15.0" -s roofing_line_width="0.4" -s speed_support="30" -s ironing_inset="0.2" -s bridge_fan_speed_3="0" -s support_tree_branch_diameter_angle="5" -s support_infill_rate="0" -s infill_randomize_start_location="False" -s mesh_position_y="0" -s wall_line_count="6" -s magic_fuzzy_skin_point_density="1.25" -s platform_adhesion="0" -s support_bottom_stair_step_width="5.0" -s speed_z_hop="10" -s retraction_speed="40" -s wall_0_material_flow="100" -s cool_min_speed="10" -s bridge_skin_density="100" -s raft_base_line_width="0.8" -s machine_nozzle_offset_y="0" -s extruder_nr="0" -s infill_overlap="14" -s support_interface_material_flow="100" -s magic_mesh_surface_mode="normal" -s raft_fan_speed="0" -s raft_interface_line_width="0.8" -s material_surface_energy="100" -s retraction_extrusion_window="2.5" -s support_fan_enable="False" -s machine_extruder_start_pos_y="0" -s extruder_prime_pos_abs="False" -s material_adhesion_tendency="0" -s infill_sparse_thickness="0.1" -s skin_no_small_gaps_heuristic="False" -s machine_nozzle_head_distance="3" -s support_brim_width="8.0" -s top_layers="6" -s material_break_preparation_temperature="220" -s layer_start_x="0.0" -s machine_min_cool_heat_time_window="50.0" -s support_bottom_line_distance="0.4" -s zig_zaggify_infill="False" -s wall_min_flow="0" -s ironing_flow="10.0" -s support_roof_offset="0.0" -s acceleration_support_roof="3000" -s acceleration_prime_tower="3000" -s skirt_gap="3" -s line_width="0.4" -s optimize_wall_printing_order="False" -s raft_acceleration="3000" -s support_bottom_height="1" -s raft_base_acceleration="3000" -s skirt_line_count="4" -s retraction_count_max="90" -s ironing_only_highest_layer="False" -s acceleration_topbottom="3000" -s machine_settings="0" -s small_hole_max_size="0" -s brim_line_count="8" -s support_roof_line_distance="0.4" -s infill_line_width="0.4" -s magic_fuzzy_skin_outside_only="False" -s prime_tower_line_width="0.4" -s jerk_print_layer_0="20" -s material_anti_ooze_retracted_position="-4" -s support_interface_angles="[ ]" -s bottom_thickness="0.8" -s speed_equalize_flow_max="150" -s jerk_roofing="20" -s minimum_roof_area="1.0" -s machine_extruder_cooling_fan_number="0" -s machine_nozzle_size="0.4" -s raft_interface_jerk="20" -s material_shrinkage_percentage="0" -s support_roof_density="100" -s spaghetti_max_height="2.0" -s bridge_skin_support_threshold="50" -s material_linear_advance_factor_topbottom="0" -s material_print_temperature="220" -s retraction_extra_prime_amount="0" -s default_material_print_temperature="200" -s roofing_layer_count="0" -s wall_0_inset="0" -s brim_width="8.0" -s speed_support_infill="30" -s raft_base_line_spacing="1.6" -s max_extrusion_before_wipe="10" -s roofing_material_flow="100" -s prime_tower_flow="100" -s acceleration_ironing="3000" -s raft_interface_acceleration="3000" -s spaghetti_infill_stepped="True" -s raft_surface_fan_speed="0" -s jerk_print="20" -s z_seam_y="190" -s retraction_min_travel="0.8" -s acceleration_layer_0="3000" -s material_break_speed="25" -s ironing_line_spacing="0.1" -s raft_airgap="0.3" -s material_flush_purge_speed="0.5" -s skin_line_width="0.4" -s machine_steps_per_mm_z="50" -s skin_angles="[ ]" -s skin_preshrink="2.4" -s clean_between_layers="False" -s travel="0" -s raft_surface_thickness="0.1" -s top_skin_preshrink="2.4" -s jerk_support_interface="20" -s cross_infill_density_image="" -s support_interface_line_width="0.4" -s support_skip_zag_per_mm="20" -s support_bottom_angles="[ ]" -s ironing_pattern="zigzag" -s speed_travel="150" -s support_angle="70" -s raft_base_speed="11.25" -s layer_0_z_overlap="0.15" -s top_skin_expand_distance="2.4" -s sub_div_rad_add="0.4" -s z_seam_corner="z_seam_corner_inner" -s roofing_angles="[ ]" -s jerk_ironing="20" -s top_bottom_thickness="0.8" -s support_top_distance="0.1" -s retraction_hop_after_extruder_switch="True" -s jerk_topbottom="20" -s bridge_wall_coast="100" -s raft_interface_fan_speed="0" -s raft_interface_thickness="0.15000000000000002" -s meshfix_maximum_travel_resolution="0.8" -s machine_feeder_wheel_diameter="10.0" -s retraction_hop_only_when_collides="False" -s coasting_enable="False" -s mold_roof_height="0.5" -g -e0 -l "0" -s extruder_nr="0"
2020-02-29 11:43:10,878 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 222 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-02-29 11:43:11,110 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 11:43:11,114 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 11:43:11,120 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [663]: Slicing took 1.3122270107269287 seconds
2020-02-29 11:43:11,121 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [664]: Number of models per buildplate: {0: 1}
2020-02-29 11:43:11,121 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [678]: See if there is more to slice...
2020-02-29 11:43:11,333 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [181]: Socket state changed to Closing
2020-02-29 11:43:11,336 - DEBUG - [MainThread] UM.Backend.Backend._onSocketError [203]: Socket debug: Arcus Error (13): Closing socket because other side requested close.
2020-02-29 11:43:11,338 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [183]: Socket state changed to Closed
2020-02-29 11:43:11,338 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onBackendQuit [829]: Backend quit with return code 0. Resetting process and socket.
2020-02-29 11:43:14,141 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-02-29 11:44:33,452 - DEBUG - [MainThread] LinearAdvanceSettingPlugin.LinearAdvanceSettingPlugin._filterGcode [109]: No used extruders specify a linear advance factor
2020-02-29 11:44:33,678 - DEBUG - [MainThread] UM.Controller.setActiveStage [149]: Setting active stage to MonitorStage
2020-02-29 11:44:33,726 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:211: Error: Cannot assign [undefined] to QString
2020-02-29 11:44:33,745 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._processRequest [308]: Request [abde0ae0a8324c768a085576d4c085b1] started
2020-02-29 11:44:33,749 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-02-29 11:44:34,310 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestFinished [369]: Request [abde0ae0a8324c768a085576d4c085b1] finished.
2020-02-29 11:44:34,312 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-02-29 11:44:34,313 - INFO - [MainThread] SliceInfoPlugin.SliceInfo._onRequestFinished [275]: SliceInfo sent successfully
2020-02-29 11:44:35,377 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-02-29 11:44:44,146 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-02-29 11:45:05,146 - DEBUG - [MainThread] UM.Message._onInactivityTriggered [88]: Hiding message because of inactivity
2020-02-29 11:45:15,505 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [772]: Resource created on OctoPrint instance: http://192.168.2.156/api/files/local/WDI3P_JST_Join_Jig.gcode
2020-02-29 11:45:45,149 - DEBUG - [MainThread] UM.Message._onInactivityTriggered [88]: Hiding message because of inactivity
2020-02-29 12:03:12,142 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Blue Leader"._octoprint._tcp.local
2020-02-29 12:03:12,144 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Orange Leader"._octoprint._tcp.local
2020-02-29 12:03:12,144 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Darth Pooky"._octoprint._tcp.local
2020-02-29 12:23:28,850 - DEBUG - [MainThread] UM.Controller.setActiveStage [149]: Setting active stage to PrepareStage
2020-02-29 12:23:28,882 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-02-29 12:23:28,944 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 12:23:28,948 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 12:23:28,956 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/plugins/plugins/PrepareStage/PrepareMain.qml:16:5: QML ActionPanelWidget: Binding loop detected for property "width"
2020-02-29 12:23:28,971 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:79: ReferenceError: stop is not defined
2020-02-29 12:23:28,975 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:63: TypeError: Cannot read property of null
2020-02-29 12:23:28,978 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:91: TypeError: Cannot read property of null
2020-02-29 12:23:28,980 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:102: TypeError: Cannot read property of null
2020-02-29 12:23:28,983 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:103: TypeError: Cannot read property of null
2020-02-29 12:23:28,986 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:139: TypeError: Cannot read property of null
2020-02-29 12:23:28,988 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:140: TypeError: Cannot read property of null
2020-02-29 12:23:28,991 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:120: TypeError: Cannot read property of null
2020-02-29 12:23:28,993 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:122: TypeError: Cannot read property of null
2020-02-29 12:23:28,996 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-02-29 12:23:28,998 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:36: TypeError: Cannot read property of null
2020-02-29 12:23:29,001 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:37: TypeError: Cannot read property of null
2020-02-29 12:23:29,003 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:49: TypeError: Cannot read property of null
2020-02-29 12:23:29,005 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:59: TypeError: Cannot read property of null
2020-02-29 12:23:29,007 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:61: TypeError: Cannot read property of null
2020-02-29 12:23:29,010 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:63: TypeError: Cannot read property of null
2020-02-29 12:23:29,012 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ExtruderBox.qml:20: TypeError: Cannot read property of null
2020-02-29 12:23:29,014 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:29: TypeError: Cannot read property of null
2020-02-29 12:23:29,017 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:30: TypeError: Cannot read property of null
2020-02-29 12:23:29,019 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:40: TypeError: Cannot read property of null
2020-02-29 12:23:29,021 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:73: TypeError: Cannot read property of null
2020-02-29 12:23:29,023 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:135: TypeError: Cannot read property of null
2020-02-29 12:23:29,026 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:246: TypeError: Cannot read property of null
2020-02-29 12:23:29,028 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:247: TypeError: Cannot read property of null
2020-02-29 12:23:29,031 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:173: TypeError: Cannot read property of null
2020-02-29 12:23:29,033 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:175: TypeError: Cannot read property of null
2020-02-29 12:23:29,036 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:190: TypeError: Cannot read property of null
2020-02-29 12:23:29,038 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:193: TypeError: Cannot read property of null
2020-02-29 12:23:29,041 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:60: TypeError: Cannot read property of null
2020-02-29 12:23:29,043 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:248: TypeError: Cannot read property of null
2020-02-29 12:23:29,046 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:294: TypeError: Cannot read property of null
2020-02-29 12:23:29,048 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:26: TypeError: Cannot read property of null
2020-02-29 12:23:29,051 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:27: TypeError: Cannot read property of null
2020-02-29 12:23:29,055 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:388: TypeError: Cannot read property of null
2020-02-29 12:23:29,057 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:390: TypeError: Cannot read property of null
2020-02-29 12:23:29,059 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:391: TypeError: Cannot read property of null
2020-02-29 12:23:29,062 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:26: TypeError: Cannot read property of null
2020-02-29 12:23:29,064 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:27: TypeError: Cannot read property of null
2020-02-29 12:23:29,067 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:24: TypeError: Cannot read property of null
2020-02-29 12:23:29,070 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:30: TypeError: Cannot read property of null
2020-02-29 12:23:29,073 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:39: TypeError: Cannot read property of null
2020-02-29 12:23:29,076 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:24: TypeError: Cannot read property of null
2020-02-29 12:23:29,078 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:30: TypeError: Cannot read property of null
2020-02-29 12:23:29,081 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:39: TypeError: Cannot read property of null
2020-02-29 12:23:29,083 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:24: TypeError: Cannot read property of null
2020-02-29 12:23:29,086 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:30: TypeError: Cannot read property of null
2020-02-29 12:23:29,088 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:39: TypeError: Cannot read property of null
2020-02-29 12:23:29,091 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupTooltip.qml:67: TypeError: Cannot read property of null
2020-02-29 12:23:29,093 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupTooltip.qml:69: TypeError: Cannot read property of null
2020-02-29 12:23:29,095 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupTooltip.qml:71: TypeError: Cannot read property of null
2020-02-29 12:23:29,098 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:150: TypeError: Cannot read property of null
2020-02-29 12:23:29,101 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-02-29 12:23:29,103 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:166: TypeError: Cannot read property of null
2020-02-29 12:23:29,106 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:167: TypeError: Cannot read property of null
2020-02-29 12:23:29,108 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:178: TypeError: Cannot read property of null
2020-02-29 12:23:29,110 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:231: TypeError: Cannot read property of null
2020-02-29 12:23:29,113 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:241: TypeError: Cannot read property of null
2020-02-29 12:23:31,654 - INFO - [MainThread] UM.Controller.deleteAllNodesWithMeshData [386]: Clearing scene
2020-02-29 12:23:31,663 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 12:23:31,666 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 12:23:31,675 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: GroupedOp.(#=1) <UM.Operations.RemoveSceneNodeOperation.RemoveSceneNodeOperation object at 0x60001489d198>, took 4ms
2020-02-29 12:23:31,678 - INFO - [MainThread] cura.CuraApplication._removeNodesWithLayerData [1900]: Clearing scene
2020-02-29 12:23:32,466 - WARNING - [MainThread] cura.UI.PrintInformation.setBaseName [360]: Unsupported Mime Type Database file extension 
2020-02-29 12:23:39,188 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-02-29 12:23:43,279 - INFO - [Thread-7] STLReader.STLReader.load_file [51]: Using NumPy-STL to load STL data.
2020-02-29 12:23:43,289 - DEBUG - [Thread-7] UM.Mesh.MeshData.calculateNormalsFromVertices [495]: Calculating normals took 0.0008230209350585938 seconds
2020-02-29 12:23:43,290 - DEBUG - [Thread-7] STLReader.STLReader._read [102]: Loaded a mesh with 31866 vertices
2020-02-29 12:23:43,310 - DEBUG - [Thread-7] UM.Mesh.MeshData.approximateConvexHull [452]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.01552581787109375 seconds. 460 input vertices. 460 output vertices.
2020-02-29 12:23:43,318 - DEBUG - [Thread-7] UM.FileHandler.ReadFileJob.run [71]: Loading file took 0.0 seconds
2020-02-29 12:23:43,335 - DEBUG - [Thread-7] UM.Mesh.MeshData.approximateConvexHull [452]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.013119935989379883 seconds. 462 input vertices. 462 output vertices.
2020-02-29 12:23:43,353 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: <UM.Operations.AddSceneNodeOperation.AddSceneNodeOperation object at 0x60001473b698>, took 3ms
2020-02-29 12:23:52,644 - DEBUG - [Thread-1] UM.Operations.OperationStack.push [67]: GroupedOp.(#=1) TranslateOp.(node=<CuraSceneNode object: 'Plier_Holder 1.0.stl'>,trans.=<0.0,17.5,0.0>), took 1ms
2020-02-29 12:23:53,184 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-02-29 12:24:07,280 - INFO - [MainThread] cura.UI.MachineActionManager.addDefaultMachineActions [56]: Default machine actions have been added for machine definition [wanhao_i3plus], do nothing.
2020-02-29 12:24:07,492 - INFO - [MainThread] cura.Settings.GlobalStack.addExtruder [184]: Extruder[wanhao_i3plus_extruder_0 #5] added to [RedLeader] at position [0]
2020-02-29 12:24:07,494 - WARNING - [MainThread] cura.Settings.ExtruderManager.registerExtruder [156]: Extruder [wanhao_i3plus_extruder_0 #5] has already been registered on machine [RedLeader], not doing anything
2020-02-29 12:24:07,497 - INFO - [MainThread] UM.Logger.info [112]: Initializing Active Machine...
2020-02-29 12:24:07,732 - WARNING - [MainThread] UM.OutputDevice.OutputDeviceManager.removeOutputDevice [179]: Could not find output device with id GreyLeader to remove
2020-02-29 12:24:07,735 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-02-29 12:24:07,738 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [303]: Connection with instance BlueLeader with url http://192.168.2.140:80/ started
2020-02-29 12:24:07,746 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/SettingsMenu.qml:51: TypeError: Cannot read property 'isEnabled' of undefined
2020-02-29 12:24:07,748 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/SettingsMenu.qml:44: TypeError: Cannot read property 'isEnabled' of undefined
2020-02-29 12:24:07,751 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/MaterialMenu.qml:26: TypeError: Cannot read property 'isEnabled' of undefined
2020-02-29 12:24:07,754 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/MaterialMenu.qml:28: TypeError: Cannot read property 'material' of undefined
2020-02-29 12:24:07,757 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-02-29 12:24:07,835 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-02-29 12:24:07,851 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-02-29 12:24:07,853 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-02-29 12:24:08,335 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [135]: New error check scheduled.
2020-02-29 12:24:08,839 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-02-29 12:24:08,851 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [63]: Updating QualityProfilesDropDownMenuModel.
2020-02-29 12:24:08,857 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device BlueLeader already added
2020-02-29 12:24:09,384 - INFO - [MainThread] cura.Machines.MachineErrorChecker._setResult [187]: Error check finished, result = False, time = 1.0s
2020-02-29 12:24:09,468 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [225]: Starting to slice...
2020-02-29 12:24:09,468 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [243]: Going to slice build plate [0]!
2020-02-29 12:24:09,473 - DEBUG - [MainThread] UM.Backend.Backend._createSocket [213]: Previous socket existed. Closing that first.
2020-02-29 12:24:09,486 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [173]: Socket state changed to Listening
2020-02-29 12:24:09,641 - INFO - [MainThread] UM.Backend.Backend.startEngine [81]: Started engine process: /Applications/Ultimaker Cura 3.app/Contents/MacOS/CuraEngine
2020-02-29 12:24:09,699 - DEBUG - [MainThread] UM.Backend.Backend._backendLog [101]: [Backend] Calling engine with: ['/Applications/Ultimaker Cura 3.app/Contents/MacOS/CuraEngine', 'connect', '127.0.0.1:49674', '']
2020-02-29 12:24:09,710 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-02-29 12:24:09,710 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [177]: Socket state changed to Connected
2020-02-29 12:24:09,721 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] Cura_SteamEngine version 4.5.0
2020-02-29 12:24:09,721 - DEBUG - [MainThread] UM.Backend.Backend._onSocketStateChanged [167]: Backend connected on port 49674
2020-02-29 12:24:09,728 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] Copyright (C) 2019 Ultimaker
2020-02-29 12:24:09,745 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-02-29 12:24:09,752 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] This program is free software: you can redistribute it and/or modify
2020-02-29 12:24:09,755 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] it under the terms of the GNU Affero General Public License as published by
2020-02-29 12:24:09,758 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] the Free Software Foundation, either version 3 of the License, or
2020-02-29 12:24:09,760 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] (at your option) any later version.
2020-02-29 12:24:09,763 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-02-29 12:24:09,765 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] This program is distributed in the hope that it will be useful,
2020-02-29 12:24:09,768 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] but WITHOUT ANY WARRANTY; without even the implied warranty of
2020-02-29 12:24:09,768 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [741]: Set OctoPrint camera url to http://192.168.2.140:80/webcam/?action=stream
2020-02-29 12:24:09,771 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
2020-02-29 12:24:09,774 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] GNU Affero General Public License for more details.
2020-02-29 12:24:09,776 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-02-29 12:24:09,779 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] You should have received a copy of the GNU Affero General Public License
2020-02-29 12:24:09,781 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] along with this program.  If not, see <http://www.gnu.org/licenses/>.
2020-02-29 12:24:09,926 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onStartSliceCompleted [429]: Sending slice message took 0.4576568603515625 seconds
2020-02-29 12:24:10,078 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING]  -s extruders_enabled_count="1" -s support_interface_density="100" -s cool_fan_speed="100.0" -s raft_base_thickness="0.36" -s bridge_skin_material_flow="60" -s slicing_tolerance="middle" -s material_end_of_filament_purge_speed="0.5" -s prime_tower_size="20" -s retraction_retract_speed="25" -s speed_layer_0="30.0" -s infill="0" -s small_feature_speed_factor="50" -s speed_prime_tower="60" -s support_brim_enable="False" -s infill_multiplier="1" -s gradual_support_infill_steps="0" -s initial_extruder_nr="0" -s infill_extruder_nr="-1" -s infill_sparse_density="20" -s bottom_skin_expand_distance="0.8" -s machine_nozzle_cool_down_speed="2.0" -s infill_offset_x="0" -s machine_depth="200" -s adhesion_z_offset_extensive_processing="False" -s limit_support_retractions="True" -s machine_max_acceleration_y="9000" -s infill_offset_y="0" -s acceleration_print_layer_0="3000" -s wall_min_flow_retract="False" -s speed_support_roof="20.0" -s xy_offset_layer_0="0" -s adhesion_type="skirt" -s z_seam_position="back" -s material_guid="" -s magic_spiralize="False" -s material_linear_advance_factor_support_interface="0" -s machine_max_acceleration_x="9000" -s material_linear_advance_factor_infill="0" -s print_temperature="210" -s skin_angles="[ ]" -s gradual_support_infill_step_height="1" -s support_conical_angle="30" -s raft_surface_acceleration="3000" -s jerk_layer_0="20" -s machine_max_feedrate_x="299792458000" -s support_pattern="lines" -s jerk_infill="20" -s speed_equalize_flow_enabled="False" -s top_thickness="0.8" -s bottom_skin_preshrink="0.8" -s raft_surface_line_spacing="0.4" -s wall_line_width="0.4" -s xy_offset="0" -s alternate_carve_order="True" -s travel_avoid_other_parts="True" -s raft_interface_speed="22.5" -s travel_avoid_distance="0.625" -s support_interface_height="1" -s jerk_travel_layer_0="30.0" -s date="29-02-2020" -s wireframe_flow="100" -s machine_acceleration="4000" -s machine_minimum_feedrate="0.0" -s skin_preshrink="0.8" -s jerk_wall="20" -s retract_at_layer_change="False" -s jerk_travel="30" -s support_skip_some_zags="False" -s minimum_roof_area="1.0" -s wireframe_flow_connection="100" -s bridge_skin_density="100" -s skirt_brim_line_width="0.4" -s top_bottom_pattern="lines" -s travel_compensate_overlapping_walls_0_enabled="True" -s flow_rate_max_extrusion_offset="0" -s material_diameter="2.85" -s support_bottom_line_width="0.4" -s raft_smoothing="5" -s speed_topbottom="30.0" -s wireframe_drag_along="0.6" -s material_break_speed="25" -s raft_interface_acceleration="3000" -s minimum_polygon_circumference="1.0" -s support_interface_skip_height="0.3" -s speed_print="60" -s skin_edge_support_layers="0" -s support_type="buildplate" -s support_roof_line_width="0.4" -s wireframe_printspeed_bottom="5" -s raft_surface_line_width="0.4" -s prime_tower_min_volume="6" -s prime_blob_enable="False" -s switch_extruder_prime_speed="20" -s wall_x_extruder_nr="-1" -s machine_steps_per_mm_z="50" -s smooth_spiralized_contours="True" -s ooze_shield_dist="2" -s bridge_wall_material_flow="50" -s cool_fan_full_layer="2" -s roofing_material_flow="100" -s wipe_hop_speed="10" -s infill_angles="[ ]" -s infill_line_distance="4.0" -s minimum_bottom_area="1.0" -s minimum_support_area="0.0" -s material_linear_advance_factor_wall_0="0" -s wall_0_wipe_dist="0.2" -s switch_extruder_extra_prime_amount="0" -s material_extrusion_cool_down_speed="0.7" -s wall_x_material_flow="100" -s support_xy_distance_overhang="0.2" -s wireframe_printspeed_up="5" -s resolution="0" -s retraction_hop="1" -s jerk_wall_0="20" -s skin_material_flow="100" -s support_bottom_density="100" -s jerk_support_interface="20" -s material_print_temperature_layer_0="210" -s retraction_min_travel="0.8" -s support_xy_overrides_z="z_overrides_xy" -s min_infill_area="0" -s machine_nozzle_tip_outer_diameter="1" -s machine_steps_per_mm_x="50" -s material_break_preparation_temperature="210" -s machine_nozzle_size="0.4" -s support_initial_layer_line_distance="2.6666666666666665" -s center_object="False" -s spaghetti_inset="0.2" -s mold_enabled="False" -s acceleration_travel="5000" -s acceleration_wall="3000" -s support_bottom_material_flow="100" -s ironing_enabled="False" -s cooling="0" -s support_infill_angles="[ ]" -s shell="0" -s bridge_skin_material_flow_2="100" -s speed_support_interface="40.0" -s meshfix="0" -s acceleration_skirt_brim="3000" -s support_line_distance="2.6666666666666665" -s retraction_enable="True" -s retraction_hop_enabled="False" -s switch_extruder_retraction_speed="20" -s acceleration_roofing="3000" -s anti_overhang_mesh="False" -s cool_min_layer_time_fan_speed_max="10" -s wipe_retraction_speed="25" -s retraction_amount="6.5" -s retraction_combing="all" -s material_flow_layer_0="100" -s wall_material_flow="100" -s extruder_prime_pos_z="0" -s support_tower_roof_angle="65" -s connect_skin_polygons="False" -s infill_pattern="grid" -s magic_fuzzy_skin_thickness="0.3" -s meshfix_extensive_stitching="False" -s infill_wipe_dist="0.1" -s skirt_brim_material_flow="100" -s bridge_skin_speed="15.0" -s mesh_position_x="0" -s prime_tower_position_y="175.584" -s jerk_wall_x="20" -s support_bottom_extruder_nr="0" -s support_roof_height="1.2" -s cutting_mesh="False" -s machine_max_jerk_xy="20.0" -s support_material_flow="100" -s bridge_fan_speed="100" -s support_line_width="0.4" -s ooze_shield_enabled="False" -s support_extruder_nr="0" -s wall_thickness="0.8" -s support_bottom_distance="0" -s material_crystallinity="False" -s machine_steps_per_mm_e="1600" -s dual="0" -s support_bottom_enable="False" -s wireframe_nozzle_clearance="1" -s speed_infill="60" -s machine_nozzle_id="unknown" -s wipe_brush_pos_x="100" -s acceleration_travel_layer_0="5000.0" -s meshfix_maximum_deviation="0.05" -s cool_fan_enabled="True" -s wall_overhang_angle="90" -s cool_fan_speed_max="100.0" -s raft_surface_layers="2" -s skirt_brim_minimal_length="250" -s material_linear_advance_factor="0" -s cool_min_layer_time="5" -s day="Sat" -s wipe_retraction_enable="True" -s travel_avoid_supports="False" -s acceleration_infill="3000" -s material_bed_temperature="63" -s bridge_skin_material_flow_3="110" -s bridge_fan_speed_2="0" -s initial_bottom_layers="8" -s support_interface_pattern="concentric" -s cross_infill_density_image="" -s adaptive_layer_height_variation="0.1" -s infill_wall_line_count="0" -s support_supported_skin_fan_speed="100" -s extruder_prime_pos_y="0" -s machine_name="Wanhao Duplicator i3 Plus" -s retraction_prime_speed="25" -s material_linear_advance_factor_prime_tower="0" -s z_seam_type="sharpest_corner" -s meshfix_keep_open_polygons="False" -s support_use_towers="True" -s infill_support_enabled="False" -s cool_fan_speed_0="0" -s support_brim_line_count="20" -s blackmagic="0" -s material_print_temp_wait="True" -s support_roof_angles="[ ]" -s infill_mesh_order="0" -s support="0" -s spaghetti_infill_enabled="False" -s acceleration_support="3000" -s support_interface_offset="0.0" -s support_tree_enable="False" -s acceleration_wall_0="3000" -s wireframe_top_jump="0.6" -s jerk_support_bottom="20" -s speed_support_bottom="20.0" -s support_conical_min_width="5.0" -s bottom_layers="8" -s material_flow_dependent_temperature="False" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s support_wall_count="0" -s machine_max_acceleration_z="100" -s skin_edge_support_thickness="0" -s coasting_min_volume="0.8" -s material_linear_advance_factor_wall="0" -s cool_fan_full_at_height="0.3" -s draft_shield_dist="10" -s layer_height="0.1" -s material_break_preparation_retracted_position="-16" -s infill_mesh="False" -s mold_angle="40" -s raft_speed="30.0" -s machine_max_jerk_z="0.4" -s support_tree_angle="40" -s wall_line_width_0="0.4" -s cross_infill_pocket_size="4.0" -s machine_max_jerk_e="5.0" -s raft_margin="15" -s raft_surface_speed="30.0" -s infill_enable_travel_optimization="False" -s machine_height="180" -s travel_retract_before_outer_wall="False" -s infill_support_angle="40" -s adaptive_layer_height_variation_step="0.01" -s raft_surface_jerk="20" -s bridge_sparse_infill_max_density="0" -s wireframe_printspeed_flat="5" -s draft_shield_height_limitation="full" -s magic_fuzzy_skin_enabled="False" -s jerk_enabled="False" -s support_mesh_drop_down="True" -s wireframe_roof_fall_down="2" -s wireframe_strategy="compensate" -s machine_gcode_flavor="RepRap (Marlin/Sprinter)" -s conical_overhang_angle="50" -s infill_overlap_mm="0.04" -s mesh_position_z="0" -s travel_speed="120" -s speed="0" -s small_hole_max_size="0" -s material_bed_temp_prepend="True" -s material="0" -s infill_before_walls="True" -s meshfix_maximum_resolution="0.5" -s wipe_repeat_count="5" -s support_tree_branch_distance="1" -s retraction_speed="25" -s gradual_infill_steps="0" -s machine_show_variants="False" -s support_interface_material_flow="100" -s infill_overlap="10" -s jerk_support="20" -s wall_line_width_x="0.4" -s roofing_extruder_nr="-1" -s raft_base_acceleration="3000" -s wall_extruder_nr="-1" -s adaptive_layer_height_threshold="0.2" -s min_skin_width_for_expansion="4.898587196589413e-17" -s material_no_load_move_factor="0.940860215" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s max_skin_angle_for_expansion="90" -s sub_div_rad_add="0.4" -s support_tree_branch_diameter_angle="5" -s top_bottom_pattern_0="lines" -s alternate_extra_perimeter="False" -s support_roof_enable="True" -s bridge_wall_coast="100" -s raft_interface_fan_speed="0" -s support_offset="0" -s wireframe_fall_down="0.5" -s material_flow="100" -s cross_support_density_image="" -s wireframe_height="3" -s z_seam_relative="False" -s support_tower_maximum_supported_diameter="3.0" -s support_interface_extruder_nr="0" -s nozzle_disallowed_areas="[]" -s support_xy_distance="0.7" -s speed_wall="30.0" -s bridge_enable_more_layers="True" -s conical_overhang_enabled="False" -s speed_travel_layer_0="60.0" -s draft_shield_height="10" -s z_seam_x="100.0" -s retraction_combing_max_distance="0" -s support_infill_rate="15" -s spaghetti_max_infill_angle="10" -s acceleration_support_interface="3000" -s machine_feeder_wheel_diameter="10.0" -s retraction_hop_only_when_collides="False" -s extruder_prime_pos_x="0" -s build_volume_temperature="28" -s layer_start_y="0.0" -s material_break_retracted_position="-50" -s material_initial_print_temperature="200" -s support_infill_extruder_nr="0" -s coasting_speed="90" -s carve_multiple_volumes="False" -s flow_rate_extrusion_offset_factor="100" -s acceleration_wall_x="3000" -s skin_overlap_mm="0.02" -s small_feature_max_length="0.0" -s wall_0_extruder_nr="-1" -s material_maximum_park_duration="300" -s machine_nozzle_temp_enabled="True" -s switch_extruder_retraction_amount="16" -s skirt_brim_speed="30.0" -s wipe_retraction_extra_prime_amount="0" -s ironing_only_highest_layer="False" -s acceleration_topbottom="3000" -s machine_settings="0" -s adhesion_extruder_nr="0" -s mold_width="5" -s jerk_support_infill="20" -s wall_overhang_speed_factor="100" -s jerk_prime_tower="20" -s skin_outline_count="1" -s bridge_skin_speed_2="15.0" -s machine_max_feedrate_y="299792458000" -s support_roof_material_flow="100" -s bridge_skin_density_2="75" -s support_tower_diameter="3.0" -s material_linear_advance_factor_support="0" -s command_line_settings="0" -s brim_replaces_support="True" -s prime_tower_wipe_enabled="True" -s fill_perimeter_gaps="everywhere" -s skin_overlap="5" -s print_sequence="all_at_once" -s acceleration_support_infill="3000" -s brim_gap="0" -s spaghetti_infill_extra_volume="0" -s support_connect_zigzags="True" -s adaptive_layer_height_enabled="False" -s travel_compensate_overlapping_walls_enabled="True" -s roofing_pattern="lines" -s fill_outline_gaps="False" -s support_zag_skip_count="8" -s machine_filament_park_distance="16" -s acceleration_print="3000" -s material_linear_advance_factor_wall_x="0" -s material_final_print_temperature="195" -s ooze_shield_angle="60" -s machine_endstop_positive_direction_x="False" -s travel_compensate_overlapping_walls_x_enabled="True" -s coasting_volume="0.064" -s machine_endstop_positive_direction_z="True" -s small_feature_speed_factor_0="50" -s machine_shape="rectangular" -s machine_heated_bed="True" -s machine_use_extruder_offset_to_offset_coords="True" -s brim_outside_only="True" -s material_standby_temperature="150" -s support_bottom_stair_step_height="0.3" -s speed_roofing="30.0" -s roofing_line_width="0.4" -s material_print_temp_prepend="True" -s wireframe_printspeed_down="5" -s minimum_interface_area="1.0" -s draft_shield_enabled="False" -s speed_support="60" -s adhesion_z_offset="0" -s wireframe_roof_outer_delay="0.2" -s ironing_inset="0.2" -s bridge_fan_speed_3="0" -s initial_layer_line_width_factor="100.0" -s machine_start_gcode="" -s experimental="0" -s bridge_wall_min_length="5" -s prime_tower_position_x="195.584" -s wipe_retraction_amount="6.5" -s material_break_temperature="50" -s top_bottom_extruder_nr="-1" -s acceleration_support_roof="3000" -s support_roof_offset="0.0" -s wall_0_material_flow="100" -s wireframe_flow_flat="100" -s speed_print_layer_0="30.0" -s default_material_bed_temperature="60" -s raft_jerk="20" -s machine_end_gcode="" -s machine_center_is_zero="False" -s support_conical_enabled="False" -s material_anti_ooze_retraction_speed="5" -s machine_head_with_fans_polygon="[[-20, 10], [10, 10], [10, -10], [-20, -10]]" -s z_seam_corner="z_seam_corner_inner" -s support_interface_angles="[ ]" -s bottom_thickness="0.8" -s raft_interface_line_spacing="1.0" -s material_flush_purge_length="60" -s machine_nozzle_heat_up_speed="2.0" -s cool_fan_speed_min="100.0" -s wipe_move_distance="20" -s bridge_skin_speed_3="15.0" -s magic_fuzzy_skin_point_dist="0.8" -s filter_out_tiny_gaps="True" -s spaghetti_flow="20" -s machine_heated_build_volume="False" -s extruder_prime_pos_abs="False" -s material_adhesion_tendency="10" -s infill_sparse_thickness="0.1" -s speed_wall_0="30.0" -s machine_extruders_share_heater="False" -s cool_lift_head="False" -s zig_zaggify_infill="False" -s acceleration_enabled="False" -s support_roof_extruder_nr="0" -s layer_start_x="0.0" -s machine_min_cool_heat_time_window="50.0" -s multiple_mesh_overlap="0.15" -s wipe_retraction_retract_speed="25" -s support_bottom_pattern="concentric" -s material_break_preparation_speed="2" -s acceleration_support_bottom="3000" -s material_end_of_filament_purge_length="20" -s wireframe_roof_drag_along="0.8" -s support_bottom_line_distance="0.4" -s wall_min_flow="0" -s ironing_flow="10.0" -s acceleration_prime_tower="3000" -s retraction_hop_after_extruder_switch_height="1" -s skirt_gap="3" -s speed_ironing="20.0" -s machine_max_acceleration_e="10000" -s line_width="0.4" -s zig_zaggify_support="False" -s wipe_hop_enable="False" -s optimize_wall_printing_order="False" -s raft_interface_line_width="0.8" -s gantry_height="180" -s material_surface_energy="100" -s print_bed_temperature="63" -s magic_mesh_surface_mode="normal" -s raft_fan_speed="0" -s wireframe_up_half_speed="0.3" -s machine_max_feedrate_e="299792458000" -s spaghetti_infill_stepped="True" -s raft_surface_fan_speed="0" -s meshfix_union_all_remove_holes="False" -s speed_wall_x="60.0" -s raft_base_jerk="20" -s machine_extruder_count="1" -s jerk_support_roof="20" -s wireframe_top_delay="0" -s machine_endstop_positive_direction_y="False" -s jerk_topbottom="20" -s remove_empty_first_layers="True" -s support_bottom_height="1" -s raft_acceleration="3000" -s jerk_print_layer_0="20" -s wireframe_roof_inset="3" -s material_anti_ooze_retracted_position="-4" -s expand_skins_expand_distance="0.8" -s bridge_wall_speed="15.0" -s support_bottom_offset="0.0" -s wireframe_flat_delay="0.1" -s machine_nozzle_expansion_angle="45" -s brim_line_count="12" -s support_roof_line_distance="0.4" -s prime_tower_line_width="0.4" -s infill_line_width="0.4" -s magic_fuzzy_skin_outside_only="False" -s speed_equalize_flow_max="150" -s jerk_roofing="20" -s raft_base_line_width="0.8" -s coasting_enable="False" -s support_interface_line_width="0.4" -s support_bottom_angles="[ ]" -s support_skip_zag_per_mm="20" -s support_extruder_nr_layer_0="0" -s meshfix_maximum_travel_resolution="0.8" -s cool_min_speed="10" -s machine_disallowed_areas="[]" -s support_interface_enable="False" -s bridge_skin_density_3="80" -s machine_max_feedrate_z="299792458000" -s support_roof_density="100" -s spaghetti_max_height="2.0" -s skirt_line_count="4" -s retraction_count_max="90" -s retraction_extrusion_window="6.5" -s support_fan_enable="False" -s support_roof_pattern="concentric" -s support_mesh="False" -s wireframe_straight_before_down="20" -s material_print_temperature="210" -s retraction_extra_prime_amount="0" -s wireframe_printspeed="5" -s machine_steps_per_mm_y="50" -s support_tree_branch_diameter="2" -s speed_slowdown_layers="2" -s default_material_print_temperature="210" -s roofing_layer_count="0" -s relative_extrusion="False" -s wall_0_inset="0" -s brim_width="8.0" -s speed_support_infill="60" -s raft_base_line_spacing="1.6" -s max_extrusion_before_wipe="10" -s ironing_pattern="zigzag" -s speed_travel="120" -s support_angle="70" -s raft_base_speed="22.5" -s layer_0_z_overlap="0.15" -s speed_z_hop="10" -s platform_adhesion="0" -s support_bottom_stair_step_width="5.0" -s raft_interface_jerk="20" -s material_shrinkage_percentage="0" -s ironing_line_spacing="0.1" -s skin_line_width="0.4" -s connect_infill_polygons="False" -s wireframe_bottom_delay="0" -s mesh_position_y="0" -s infill_randomize_start_location="False" -s machine_nozzle_head_distance="3" -s support_brim_width="8.0" -s top_layers="8" -s support_infill_sparse_thickness="0.1" -s material_bed_temperature_layer_0="63" -s clean_between_layers="False" -s travel="0" -s material_bed_temp_wait="True" -s raft_airgap="0.3" -s material_flush_purge_speed="0.5" -s support_enable="False" -s prime_tower_enable="False" -s raft_surface_thickness="0.1" -s jerk_skirt_brim="20" -s machine_heat_zone_length="16" -s gradual_infill_step_height="1.5" -s outer_inset_first="False" -s prime_tower_brim_enable="False" -s top_skin_preshrink="0.8" -s top_skin_expand_distance="0.8" -s jerk_print="20" -s mold_roof_height="0.5" -s jerk_ironing="20" -s roofing_angles="[ ]" -s support_top_distance="0.1" -s retraction_hop_after_extruder_switch="True" -s material_linear_advance_factor_skirt_brim="0" -s layer_height_0="0.3" -s switch_extruder_retraction_speeds="20" -s machine_firmware_retract="False" -s meshfix_union_all="True" -s support_z_distance="0.1" -s bridge_settings_enabled="False" -s z_seam_y="200" -s acceleration_layer_0="3000" -s raft_interface_thickness="0.15000000000000002" -s wall_line_count="2" -s magic_fuzzy_skin_point_density="1.25" -s top_bottom_thickness="0.8" -s machine_width="200" -s prime_tower_flow="100" -s acceleration_ironing="3000" -s raft_base_fan_speed="0" -s support_tree_collision_resolution="0.2" -s skin_no_small_gaps_heuristic="False" -s wipe_hop_amount="1" -s support_join_distance="2.0" -s machine_buildplate_type="glass" -s time="12:24:09" -s infill_material_flow="100" -s wireframe_enabled="False" -s material_linear_advance_factor_topbottom="0" -s wipe_retraction_prime_speed="25" -s wipe_pause="0" -s bridge_skin_support_threshold="50" -e0 -s switch_extruder_retraction_speeds="20" -s support_interface_density="100" -s cool_fan_speed="80" -s raft_base_thickness="0.36" -s machine_nozzle_offset_x="0" -s initial_layer_line_width_factor="104.0" -s bridge_skin_material_flow="60" -s material_end_of_filament_purge_speed="0.5" -s retraction_retract_speed="65" -s speed_layer_0="12" -s infill="0" -s small_feature_speed_factor="50" -s support_infill_sparse_thickness="0.1" -s speed_prime_tower="30" -s support_brim_enable="False" -s infill_multiplier="1" -s gradual_support_infill_steps="0" -s infill_sparse_density="20" -s bottom_skin_expand_distance="1.6" -s machine_nozzle_cool_down_speed="2.0" -s infill_offset_x="0" -s limit_support_retractions="True" -s machine_extruder_end_pos_x="0" -s infill_offset_y="0" -s acceleration_print_layer_0="3000" -s wall_min_flow_retract="False" -s speed_support_roof="20.0" -s xy_offset_layer_0="0" -s z_seam_position="back" -s material_guid="0ff92885-617b-4144-a03c-9989872454bc" -s material_linear_advance_factor_support_interface="0" -s material_linear_advance_factor_infill="0" -s material_break_preparation_speed="2" -s acceleration_support_bottom="3000" -s material_end_of_filament_purge_length="20" -s gradual_support_infill_step_height="1" -s support_conical_angle="30" -s raft_surface_acceleration="3000" -s support_roof_pattern="concentric" -s jerk_layer_0="20" -s support_pattern="lines" -s jerk_infill="20" -s speed_equalize_flow_enabled="False" -s top_thickness="0.8" -s bottom_skin_preshrink="1.6" -s raft_surface_line_spacing="0.4" -s skin_edge_support_layers="0" -s wall_line_width="0.4" -s xy_offset="0" -s travel_avoid_other_parts="True" -s raft_interface_speed="11.25" -s travel_avoid_distance="0.625" -s support_interface_height="1" -s wipe_move_distance="20" -s cool_fan_speed_min="80" -s acceleration_skirt_brim="3000" -s meshfix="0" -s support_bottom_material_flow="100" -s acceleration_wall="3000" -s ironing_enabled="False" -s acceleration_travel="5000" -s support_supported_skin_fan_speed="100" -s infill_wall_line_count="0" -s support_wall_count="0" -s skin_edge_support_thickness="0" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s experimental="0" -s support_skip_some_zags="False" -s travel_compensate_overlapping_walls_0_enabled="True" -s support_bottom_line_width="0.4" -s material_flow="100" -s support_offset="0" -s raft_smoothing="5" -s speed_topbottom="15.0" -s wipe_hop_enable="False" -s zig_zaggify_support="False" -s speed_print="30" -s prime_tower_min_volume="6" -s jerk_travel="30" -s material_linear_advance_factor_skirt_brim="0" -s support_tree_branch_diameter="2" -s machine_steps_per_mm_y="50" -s acceleration_support_interface="3000" -s spaghetti_max_infill_angle="10" -s bridge_wall_material_flow="50" -s wipe_hop_speed="10" -s jerk_wall_0="20" -s retraction_hop="1" -s wipe_pause="0" -s wipe_retraction_prime_speed="65" -s minimum_support_area="0.0" -s material_linear_advance_factor_wall_0="0" -s wall_0_wipe_dist="0.2" -s switch_extruder_extra_prime_amount="0" -s support_tower_maximum_supported_diameter="3.0" -s spaghetti_infill_extra_volume="0" -s support_connect_zigzags="True" -s support_xy_distance_overhang="0.2" -s bridge_skin_density_3="80" -s support_interface_enable="False" -s resolution="0" -s support_line_width="0.4" -s material_break_preparation_retracted_position="-16" -s support_xy_overrides_z="z_overrides_xy" -s min_infill_area="0" -s machine_nozzle_tip_outer_diameter="1" -s machine_steps_per_mm_x="50" -s infill_angles="[ ]" -s minimum_interface_area="1.0" -s skirt_brim_line_width="0.4" -s top_bottom_pattern="lines" -s cool_fan_full_layer="2" -s center_object="False" -s spaghetti_inset="0.2" -s gradual_infill_steps="0" -s jerk_travel_layer_0="30.0" -s mold_enabled="False" -s raft_surface_line_width="0.4" -s cooling="0" -s support_tree_collision_resolution="0.2" -s raft_base_fan_speed="0" -s material_print_temperature_layer_0="217" -s raft_interface_line_spacing="1.0" -s machine_nozzle_heat_up_speed="2.0" -s material_flush_purge_length="60" -s bridge_skin_material_flow_2="100" -s speed_support_interface="20.0" -s support_interface_offset="0.0" -s jerk_support="20" -s wall_line_width_x="0.4" -s support_line_distance="2.6666666666666665" -s retraction_enable="True" -s switch_extruder_retraction_speed="20" -s retraction_hop_enabled="False" -s acceleration_roofing="3000" -s cool_min_layer_time_fan_speed_max="10" -s wipe_retraction_speed="65" -s retraction_amount="2.5" -s raft_speed="15.0" -s mold_angle="40" -s material_flow_layer_0="100" -s wall_material_flow="100" -s bridge_skin_material_flow_3="110" -s bridge_fan_speed_2="0" -s initial_bottom_layers="6" -s support_interface_pattern="concentric" -s connect_skin_polygons="False" -s infill_pattern="grid" -s material_flow_dependent_temperature="False" -s bottom_layers="6" -s magic_fuzzy_skin_thickness="0.3" -s meshfix_extensive_stitching="False" -s infill_wipe_dist="0.1" -s machine_extruder_start_pos_abs="False" -s skirt_brim_material_flow="100" -s bridge_skin_speed="10" -s jerk_wall_x="20" -s wipe_retraction_amount="2.5" -s material_break_temperature="50" -s support_roof_height="1.2" -s magic_fuzzy_skin_enabled="False" -s connect_infill_polygons="False" -s machine_extruder_start_code="" -s support_material_flow="100" -s bridge_fan_speed="100" -s bridge_sparse_infill_max_density="0" -s wall_thickness="0.8" -s support_bottom_distance="0" -s material_crystallinity="False" -s machine_steps_per_mm_e="1600" -s jerk_wall="20" -s dual="0" -s support_bottom_enable="False" -s skin_overlap="5" -s speed_infill="30" -s machine_nozzle_id="unknown" -s wipe_brush_pos_x="100" -s acceleration_travel_layer_0="5000.0" -s raft_surface_layers="2" -s skirt_brim_minimal_length="250" -s material_linear_advance_factor="0" -s cool_min_layer_time="5" -s wipe_retraction_enable="True" -s travel_avoid_supports="False" -s acceleration_infill="3000" -s speed_ironing="10.0" -s support_roof_line_width="0.4" -s extruder_prime_pos_y="0" -s material_linear_advance_factor_prime_tower="0" -s retraction_prime_speed="65" -s z_seam_type="sharpest_corner" -s prime_blob_enable="False" -s meshfix_keep_open_polygons="False" -s raft_surface_speed="15.0" -s infill_enable_travel_optimization="False" -s machine_nozzle_temp_enabled="True" -s switch_extruder_retraction_amount="16" -s skirt_brim_speed="12" -s material_maximum_park_duration="300" -s infill_material_flow="100" -s support_use_towers="True" -s infill_support_enabled="False" -s cool_fan_speed_0="0" -s support_brim_line_count="20" -s blackmagic="0" -s multiple_mesh_overlap="0.15" -s wipe_retraction_retract_speed="65" -s material_linear_advance_factor_wall_x="0" -s acceleration_print="3000" -s support_bottom_pattern="concentric" -s meshfix_maximum_deviation="0.05" -s cool_fan_enabled="True" -s wall_overhang_angle="90" -s cool_fan_speed_max="80" -s machine_extruder_end_code="" -s support_roof_angles="[ ]" -s retraction_hop_after_extruder_switch_height="1" -s machine_extruder_end_pos_abs="False" -s support="0" -s spaghetti_infill_enabled="False" -s acceleration_support="3000" -s acceleration_wall_0="3000" -s jerk_support_bottom="20" -s material_extrusion_cool_down_speed="0.7" -s speed_support_bottom="20.0" -s support_conical_min_width="5.0" -s coasting_min_volume="0.8" -s material_linear_advance_factor_wall="0" -s cool_fan_full_at_height="0.3" -s support_infill_angles="[ ]" -s shell="0" -s support_tower_diameter="3.0" -s machine_extruder_start_pos_x="0" -s wipe_hop_amount="1" -s support_join_distance="2.0" -s support_tree_angle="40" -s fill_perimeter_gaps="everywhere" -s prime_tower_wipe_enabled="True" -s machine_heat_zone_length="16" -s jerk_skirt_brim="20" -s raft_jerk="20" -s speed_print_layer_0="12" -s command_line_settings="0" -s material_linear_advance_factor_support="0" -s conical_overhang_angle="50" -s infill_overlap_mm="0.05600000000000001" -s mesh_position_z="0" -s speed="0" -s material_diameter="1.75" -s meshfix_union_all_remove_holes="False" -s gradual_infill_step_height="1.5" -s cool_lift_head="False" -s speed_wall_0="15.0" -s outer_inset_first="False" -s extruder_prime_pos_z="0" -s support_tower_roof_angle="65" -s meshfix_maximum_resolution="0.5" -s wipe_repeat_count="5" -s support_tree_branch_distance="1" -s wall_x_material_flow="100" -s min_skin_width_for_expansion="3.67394039744206e-17" -s material_no_load_move_factor="0.940860215" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s max_skin_angle_for_expansion="90" -s top_bottom_pattern_0="lines" -s alternate_extra_perimeter="False" -s support_roof_enable="True" -s slicing_tolerance="exclusive" -s machine_extruder_end_pos_y="0" -s cross_support_density_image="" -s z_seam_relative="False" -s support_xy_distance="0.7" -s speed_wall="15.0" -s material_final_print_temperature="202" -s machine_endstop_positive_direction_x="False" -s bridge_enable_more_layers="True" -s conical_overhang_enabled="False" -s speed_travel_layer_0="60.0" -s fill_outline_gaps="False" -s machine_filament_park_distance="16" -s support_zag_skip_count="8" -s material_break_retracted_position="-50" -s material_initial_print_temperature="207" -s switch_extruder_prime_speed="20" -s extruder_prime_pos_x="0" -s layer_start_y="0.0" -s filter_out_tiny_gaps="True" -s bridge_skin_speed_3="10" -s spaghetti_flow="20" -s magic_fuzzy_skin_point_dist="0.8" -s coasting_speed="90" -s skin_material_flow="100" -s support_bottom_density="100" -s acceleration_wall_x="3000" -s skin_overlap_mm="0.02" -s small_feature_max_length="0.0" -s support_initial_layer_line_distance="2.6666666666666665" -s support_bottom_offset="0.0" -s bridge_wall_speed="10" -s meshfix_union_all="True" -s support_z_distance="0.1" -s infill_line_distance="4.0" -s minimum_bottom_area="1.0" -s retraction_combing_max_distance="0" -s z_seam_x="100.0" -s expand_skins_expand_distance="1.6" -s mesh_position_x="0" -s wipe_retraction_extra_prime_amount="0" -s jerk_support_roof="20" -s machine_endstop_positive_direction_y="False" -s coasting_volume="0.064" -s machine_endstop_positive_direction_z="True" -s small_feature_speed_factor_0="50" -s infill_support_angle="40" -s raft_surface_jerk="20" -s support_interface_skip_height="0.3" -s mold_width="5" -s infill_before_walls="True" -s material="0" -s jerk_support_infill="20" -s wall_overhang_speed_factor="100" -s jerk_prime_tower="20" -s skin_outline_count="1" -s material_anti_ooze_retraction_speed="5" -s support_conical_enabled="False" -s bridge_skin_speed_2="10" -s retract_at_layer_change="False" -s raft_base_jerk="20" -s speed_wall_x="30.0" -s support_roof_material_flow="100" -s bridge_skin_density_2="75" -s brim_replaces_support="True" -s acceleration_support_infill="3000" -s brim_gap="0" -s travel_compensate_overlapping_walls_enabled="True" -s roofing_pattern="lines" -s travel_compensate_overlapping_walls_x_enabled="True" -s wall_line_width_0="0.4" -s cross_infill_pocket_size="4.0" -s raft_margin="15" -s support_bottom_stair_step_height="0.3" -s brim_outside_only="True" -s material_standby_temperature="175" -s speed_roofing="15.0" -s roofing_line_width="0.4" -s speed_support="30" -s ironing_inset="0.2" -s bridge_fan_speed_3="0" -s support_tree_branch_diameter_angle="5" -s support_infill_rate="15" -s infill_randomize_start_location="False" -s mesh_position_y="0" -s wall_line_count="4" -s magic_fuzzy_skin_point_density="1.25" -s platform_adhesion="0" -s support_bottom_stair_step_width="5.0" -s speed_z_hop="10" -s retraction_speed="65" -s wall_0_material_flow="100" -s cool_min_speed="10" -s bridge_skin_density="100" -s raft_base_line_width="0.8" -s machine_nozzle_offset_y="0" -s extruder_nr="0" -s infill_overlap="14" -s support_interface_material_flow="100" -s magic_mesh_surface_mode="normal" -s raft_fan_speed="0" -s raft_interface_line_width="0.8" -s material_surface_energy="100" -s retraction_extrusion_window="2.5" -s support_fan_enable="False" -s machine_extruder_start_pos_y="0" -s extruder_prime_pos_abs="False" -s material_adhesion_tendency="0" -s infill_sparse_thickness="0.1" -s skin_no_small_gaps_heuristic="False" -s machine_nozzle_head_distance="3" -s support_brim_width="8.0" -s top_layers="6" -s material_break_preparation_temperature="217" -s layer_start_x="0.0" -s machine_min_cool_heat_time_window="50.0" -s support_bottom_line_distance="0.4" -s zig_zaggify_infill="False" -s wall_min_flow="0" -s ironing_flow="10.0" -s support_roof_offset="0.0" -s acceleration_support_roof="3000" -s acceleration_prime_tower="3000" -s skirt_gap="3" -s line_width="0.4" -s optimize_wall_printing_order="False" -s raft_acceleration="3000" -s support_bottom_height="1" -s raft_base_acceleration="3000" -s skirt_line_count="4" -s retraction_count_max="90" -s ironing_only_highest_layer="False" -s acceleration_topbottom="3000" -s machine_settings="0" -s small_hole_max_size="0" -s brim_line_count="12" -s support_roof_line_distance="0.4" -s infill_line_width="0.4" -s magic_fuzzy_skin_outside_only="False" -s prime_tower_line_width="0.4" -s jerk_print_layer_0="20" -s material_anti_ooze_retracted_position="-4" -s support_interface_angles="[ ]" -s bottom_thickness="0.8" -s speed_equalize_flow_max="150" -s jerk_roofing="20" -s minimum_roof_area="1.0" -s machine_extruder_cooling_fan_number="0" -s machine_nozzle_size="0.4" -s raft_interface_jerk="20" -s material_shrinkage_percentage="0" -s support_roof_density="100" -s spaghetti_max_height="2.0" -s bridge_skin_support_threshold="50" -s material_linear_advance_factor_topbottom="0" -s material_print_temperature="217" -s retraction_extra_prime_amount="0" -s default_material_print_temperature="200" -s roofing_layer_count="0" -s wall_0_inset="0" -s brim_width="8.0" -s speed_support_infill="30" -s raft_base_line_spacing="1.6" -s max_extrusion_before_wipe="10" -s roofing_material_flow="100" -s prime_tower_flow="100" -s acceleration_ironing="3000" -s raft_interface_acceleration="3000" -s spaghetti_infill_stepped="True" -s raft_surface_fan_speed="0" -s jerk_print="20" -s z_seam_y="200" -s retraction_min_travel="0.8" -s acceleration_layer_0="3000" -s material_break_speed="25" -s ironing_line_spacing="0.1" -s raft_airgap="0.3" -s material_flush_purge_speed="0.5" -s skin_line_width="0.4" -s machine_steps_per_mm_z="50" -s skin_angles="[ ]" -s skin_preshrink="1.6" -s clean_between_layers="False" -s travel="0" -s raft_surface_thickness="0.1" -s top_skin_preshrink="1.6" -s jerk_support_interface="20" -s cross_infill_density_image="" -s support_interface_line_width="0.4" -s support_skip_zag_per_mm="20" -s support_bottom_angles="[ ]" -s ironing_pattern="zigzag" -s speed_travel="150" -s support_angle="70" -s raft_base_speed="11.25" -s layer_0_z_overlap="0.15" -s top_skin_expand_distance="1.6" -s sub_div_rad_add="0.4" -s z_seam_corner="z_seam_corner_inner" -s roofing_angles="[ ]" -s jerk_ironing="20" -s top_bottom_thickness="0.8" -s support_top_distance="0.1" -s retraction_hop_after_extruder_switch="True" -s jerk_topbottom="20" -s bridge_wall_coast="100" -s raft_interface_fan_speed="0" -s raft_interface_thickness="0.15000000000000002" -s meshfix_maximum_travel_resolution="0.8" -s machine_feeder_wheel_diameter="10.0" -s retraction_hop_only_when_collides="False" -s coasting_enable="False" -s mold_roof_height="0.5" -g -e0 -l "0" -s extruder_nr="0"
2020-02-29 12:24:16,531 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 347 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-02-29 12:24:16,643 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 12:24:16,646 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 12:24:16,664 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [663]: Slicing took 7.195656776428223 seconds
2020-02-29 12:24:16,664 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [664]: Number of models per buildplate: {0: 1}
2020-02-29 12:24:16,665 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [678]: See if there is more to slice...
2020-02-29 12:24:16,870 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [181]: Socket state changed to Closing
2020-02-29 12:24:16,873 - DEBUG - [MainThread] UM.Backend.Backend._onSocketError [203]: Socket debug: Arcus Error (13): Closing socket because other side requested close.
2020-02-29 12:24:16,876 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [183]: Socket state changed to Closed
2020-02-29 12:24:16,876 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onBackendQuit [829]: Backend quit with return code 0. Resetting process and socket.
2020-02-29 12:24:18,185 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-02-29 12:25:35,024 - DEBUG - [MainThread] LinearAdvanceSettingPlugin.LinearAdvanceSettingPlugin._filterGcode [109]: No used extruders specify a linear advance factor
2020-02-29 12:25:35,247 - DEBUG - [MainThread] UM.Controller.setActiveStage [149]: Setting active stage to MonitorStage
2020-02-29 12:25:35,294 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:211: Error: Cannot assign [undefined] to QString
2020-02-29 12:25:35,333 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._processRequest [308]: Request [dd9218c075834785b95a3b5aa2283ab0] started
2020-02-29 12:25:35,337 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-02-29 12:25:35,786 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestFinished [369]: Request [dd9218c075834785b95a3b5aa2283ab0] finished.
2020-02-29 12:25:35,789 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-02-29 12:25:35,790 - INFO - [MainThread] SliceInfoPlugin.SliceInfo._onRequestFinished [275]: SliceInfo sent successfully
2020-02-29 12:25:37,984 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._cancelSendGcode [472]: Stopping upload because the user pressed cancel.
2020-02-29 12:25:37,992 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-02-29 12:25:39,835 - DEBUG - [MainThread] UM.Controller.setActiveStage [149]: Setting active stage to PrepareStage
2020-02-29 12:25:39,865 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-02-29 12:25:39,922 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 12:25:39,925 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 12:25:39,931 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/plugins/plugins/PrepareStage/PrepareMain.qml:16:5: QML ActionPanelWidget: Binding loop detected for property "width"
2020-02-29 12:25:39,944 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:79: ReferenceError: stop is not defined
2020-02-29 12:25:39,947 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:63: TypeError: Cannot read property of null
2020-02-29 12:25:39,950 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:91: TypeError: Cannot read property of null
2020-02-29 12:25:39,952 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:102: TypeError: Cannot read property of null
2020-02-29 12:25:39,955 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:103: TypeError: Cannot read property of null
2020-02-29 12:25:39,957 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:139: TypeError: Cannot read property of null
2020-02-29 12:25:39,959 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:140: TypeError: Cannot read property of null
2020-02-29 12:25:39,962 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:120: TypeError: Cannot read property of null
2020-02-29 12:25:39,964 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:122: TypeError: Cannot read property of null
2020-02-29 12:25:39,967 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-02-29 12:25:39,969 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:36: TypeError: Cannot read property of null
2020-02-29 12:25:39,972 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:37: TypeError: Cannot read property of null
2020-02-29 12:25:39,974 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:49: TypeError: Cannot read property of null
2020-02-29 12:25:39,976 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:59: TypeError: Cannot read property of null
2020-02-29 12:25:39,979 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:61: TypeError: Cannot read property of null
2020-02-29 12:25:39,981 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:63: TypeError: Cannot read property of null
2020-02-29 12:25:39,983 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ExtruderBox.qml:20: TypeError: Cannot read property of null
2020-02-29 12:25:39,985 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:29: TypeError: Cannot read property of null
2020-02-29 12:25:39,988 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:30: TypeError: Cannot read property of null
2020-02-29 12:25:39,990 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:40: TypeError: Cannot read property of null
2020-02-29 12:25:39,992 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:73: TypeError: Cannot read property of null
2020-02-29 12:25:39,995 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:135: TypeError: Cannot read property of null
2020-02-29 12:25:39,997 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:246: TypeError: Cannot read property of null
2020-02-29 12:25:40,000 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:247: TypeError: Cannot read property of null
2020-02-29 12:25:40,002 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:173: TypeError: Cannot read property of null
2020-02-29 12:25:40,004 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:175: TypeError: Cannot read property of null
2020-02-29 12:25:40,006 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:190: TypeError: Cannot read property of null
2020-02-29 12:25:40,009 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:193: TypeError: Cannot read property of null
2020-02-29 12:25:40,012 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:60: TypeError: Cannot read property of null
2020-02-29 12:25:40,014 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:248: TypeError: Cannot read property of null
2020-02-29 12:25:40,016 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:294: TypeError: Cannot read property of null
2020-02-29 12:25:40,019 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:26: TypeError: Cannot read property of null
2020-02-29 12:25:40,022 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:27: TypeError: Cannot read property of null
2020-02-29 12:25:40,025 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:388: TypeError: Cannot read property of null
2020-02-29 12:25:40,028 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:390: TypeError: Cannot read property of null
2020-02-29 12:25:40,030 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:391: TypeError: Cannot read property of null
2020-02-29 12:25:40,032 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:26: TypeError: Cannot read property of null
2020-02-29 12:25:40,034 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:27: TypeError: Cannot read property of null
2020-02-29 12:25:40,037 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:24: TypeError: Cannot read property of null
2020-02-29 12:25:40,039 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:30: TypeError: Cannot read property of null
2020-02-29 12:25:40,041 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:39: TypeError: Cannot read property of null
2020-02-29 12:25:40,044 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:24: TypeError: Cannot read property of null
2020-02-29 12:25:40,046 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:30: TypeError: Cannot read property of null
2020-02-29 12:25:40,048 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:39: TypeError: Cannot read property of null
2020-02-29 12:25:40,051 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:24: TypeError: Cannot read property of null
2020-02-29 12:25:40,054 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:30: TypeError: Cannot read property of null
2020-02-29 12:25:40,056 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:39: TypeError: Cannot read property of null
2020-02-29 12:25:40,058 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupTooltip.qml:67: TypeError: Cannot read property of null
2020-02-29 12:25:40,060 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupTooltip.qml:69: TypeError: Cannot read property of null
2020-02-29 12:25:40,063 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupTooltip.qml:71: TypeError: Cannot read property of null
2020-02-29 12:25:40,065 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:150: TypeError: Cannot read property of null
2020-02-29 12:25:40,068 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-02-29 12:25:40,070 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:166: TypeError: Cannot read property of null
2020-02-29 12:25:40,072 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:167: TypeError: Cannot read property of null
2020-02-29 12:25:40,074 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:178: TypeError: Cannot read property of null
2020-02-29 12:25:40,077 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:231: TypeError: Cannot read property of null
2020-02-29 12:25:40,079 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:241: TypeError: Cannot read property of null
2020-02-29 12:25:52,193 - DEBUG - [MainThread] LinearAdvanceSettingPlugin.LinearAdvanceSettingPlugin._filterGcode [109]: No used extruders specify a linear advance factor
2020-02-29 12:25:52,415 - DEBUG - [MainThread] UM.Controller.setActiveStage [149]: Setting active stage to MonitorStage
2020-02-29 12:25:52,459 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:211: Error: Cannot assign [undefined] to QString
2020-02-29 12:25:52,498 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._processRequest [308]: Request [7ea710617d4c442c8c25eb72f6b1fbdc] started
2020-02-29 12:25:52,502 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-02-29 12:25:52,819 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestFinished [369]: Request [7ea710617d4c442c8c25eb72f6b1fbdc] finished.
2020-02-29 12:25:52,821 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-02-29 12:25:52,823 - INFO - [MainThread] SliceInfoPlugin.SliceInfo._onRequestFinished [275]: SliceInfo sent successfully
2020-02-29 12:25:59,197 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-02-29 12:26:02,191 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-02-29 12:26:29,203 - DEBUG - [MainThread] UM.Message._onInactivityTriggered [88]: Hiding message because of inactivity
2020-02-29 12:27:45,196 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [772]: Resource created on OctoPrint instance: http://192.168.2.140/api/files/local/WDI3P_Plier_Holder_1.0.gcode
2020-02-29 12:28:15,197 - DEBUG - [MainThread] UM.Message._onInactivityTriggered [88]: Hiding message because of inactivity
2020-02-29 13:18:12,984 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Blue Leader"._octoprint._tcp.local
2020-02-29 13:18:12,986 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Darth Pooky"._octoprint._tcp.local
2020-02-29 13:52:49,278 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 408
2020-02-29 13:53:29,550 - DEBUG - [MainThread] UM.Controller.setActiveStage [149]: Setting active stage to PrepareStage
2020-02-29 13:53:29,598 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-02-29 13:53:29,677 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 13:53:29,680 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 13:53:29,689 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/plugins/plugins/PrepareStage/PrepareMain.qml:16:5: QML ActionPanelWidget: Binding loop detected for property "width"
2020-02-29 13:53:29,710 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:79: ReferenceError: stop is not defined
2020-02-29 13:53:29,714 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:63: TypeError: Cannot read property of null
2020-02-29 13:53:29,717 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:91: TypeError: Cannot read property of null
2020-02-29 13:53:29,720 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:102: TypeError: Cannot read property of null
2020-02-29 13:53:29,722 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:103: TypeError: Cannot read property of null
2020-02-29 13:53:29,725 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:139: TypeError: Cannot read property of null
2020-02-29 13:53:29,728 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:140: TypeError: Cannot read property of null
2020-02-29 13:53:29,730 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:120: TypeError: Cannot read property of null
2020-02-29 13:53:29,733 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:122: TypeError: Cannot read property of null
2020-02-29 13:53:29,735 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-02-29 13:53:29,738 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:36: TypeError: Cannot read property of null
2020-02-29 13:53:29,740 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:37: TypeError: Cannot read property of null
2020-02-29 13:53:29,742 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:49: TypeError: Cannot read property of null
2020-02-29 13:53:29,745 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:59: TypeError: Cannot read property of null
2020-02-29 13:53:29,747 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:61: TypeError: Cannot read property of null
2020-02-29 13:53:29,750 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:63: TypeError: Cannot read property of null
2020-02-29 13:53:29,753 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ExtruderBox.qml:20: TypeError: Cannot read property of null
2020-02-29 13:53:29,756 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:29: TypeError: Cannot read property of null
2020-02-29 13:53:29,758 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:30: TypeError: Cannot read property of null
2020-02-29 13:53:29,761 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:40: TypeError: Cannot read property of null
2020-02-29 13:53:29,763 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:73: TypeError: Cannot read property of null
2020-02-29 13:53:29,765 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:135: TypeError: Cannot read property of null
2020-02-29 13:53:29,768 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:246: TypeError: Cannot read property of null
2020-02-29 13:53:29,770 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:247: TypeError: Cannot read property of null
2020-02-29 13:53:29,772 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:173: TypeError: Cannot read property of null
2020-02-29 13:53:29,774 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:175: TypeError: Cannot read property of null
2020-02-29 13:53:29,777 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:190: TypeError: Cannot read property of null
2020-02-29 13:53:29,779 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:193: TypeError: Cannot read property of null
2020-02-29 13:53:29,782 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:60: TypeError: Cannot read property of null
2020-02-29 13:53:29,785 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:248: TypeError: Cannot read property of null
2020-02-29 13:53:29,787 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:294: TypeError: Cannot read property of null
2020-02-29 13:53:29,790 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:26: TypeError: Cannot read property of null
2020-02-29 13:53:29,792 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:27: TypeError: Cannot read property of null
2020-02-29 13:53:29,796 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:388: TypeError: Cannot read property of null
2020-02-29 13:53:29,798 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:390: TypeError: Cannot read property of null
2020-02-29 13:53:29,800 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:391: TypeError: Cannot read property of null
2020-02-29 13:53:29,803 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:26: TypeError: Cannot read property of null
2020-02-29 13:53:29,805 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:27: TypeError: Cannot read property of null
2020-02-29 13:53:29,807 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:24: TypeError: Cannot read property of null
2020-02-29 13:53:29,810 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:30: TypeError: Cannot read property of null
2020-02-29 13:53:29,812 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:39: TypeError: Cannot read property of null
2020-02-29 13:53:29,814 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:24: TypeError: Cannot read property of null
2020-02-29 13:53:29,817 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:30: TypeError: Cannot read property of null
2020-02-29 13:53:29,819 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:39: TypeError: Cannot read property of null
2020-02-29 13:53:29,821 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:24: TypeError: Cannot read property of null
2020-02-29 13:53:29,824 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:30: TypeError: Cannot read property of null
2020-02-29 13:53:29,826 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:39: TypeError: Cannot read property of null
2020-02-29 13:53:29,829 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupTooltip.qml:67: TypeError: Cannot read property of null
2020-02-29 13:53:29,831 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupTooltip.qml:69: TypeError: Cannot read property of null
2020-02-29 13:53:29,833 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupTooltip.qml:71: TypeError: Cannot read property of null
2020-02-29 13:53:29,836 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:150: TypeError: Cannot read property of null
2020-02-29 13:53:29,838 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-02-29 13:53:29,841 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:166: TypeError: Cannot read property of null
2020-02-29 13:53:29,843 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:167: TypeError: Cannot read property of null
2020-02-29 13:53:29,846 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:178: TypeError: Cannot read property of null
2020-02-29 13:53:29,848 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:231: TypeError: Cannot read property of null
2020-02-29 13:53:29,850 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:241: TypeError: Cannot read property of null
2020-02-29 13:53:34,707 - INFO - [MainThread] cura.UI.MachineActionManager.addDefaultMachineActions [56]: Default machine actions have been added for machine definition [wanhao_i3plus], do nothing.
2020-02-29 13:53:34,724 - WARNING - [MainThread] cura.Settings.GlobalStack.addExtruder [179]: Extruder [wanhao_i3plus_extruder_0 #3] has already been added to this stack [GreyLeader]
2020-02-29 13:53:34,726 - WARNING - [MainThread] cura.Settings.ExtruderManager.registerExtruder [156]: Extruder [wanhao_i3plus_extruder_0 #3] has already been registered on machine [GreyLeader], not doing anything
2020-02-29 13:53:34,730 - INFO - [MainThread] UM.Logger.info [112]: Initializing Active Machine...
2020-02-29 13:53:34,740 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 13:53:34,744 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 13:53:34,885 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-02-29 13:53:34,921 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device GreyLeader already added
2020-02-29 13:53:34,923 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device GreyLeader already added
2020-02-29 13:53:34,924 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [303]: Connection with instance GreyLeader with url http://192.168.2.156:80/ started
2020-02-29 13:53:34,938 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/SettingsMenu.qml:51: TypeError: Cannot read property 'isEnabled' of undefined
2020-02-29 13:53:34,941 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/SettingsMenu.qml:44: TypeError: Cannot read property 'isEnabled' of undefined
2020-02-29 13:53:34,944 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/MaterialMenu.qml:26: TypeError: Cannot read property 'isEnabled' of undefined
2020-02-29 13:53:34,947 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/MaterialMenu.qml:28: TypeError: Cannot read property 'material' of undefined
2020-02-29 13:53:34,950 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-02-29 13:53:35,008 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-02-29 13:53:35,026 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-02-29 13:53:35,028 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-02-29 13:53:35,584 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device GreyLeader already added
2020-02-29 13:53:35,587 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device GreyLeader already added
2020-02-29 13:53:35,589 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device GreyLeader already added
2020-02-29 13:53:35,654 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [135]: New error check scheduled.
2020-02-29 13:53:36,170 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-02-29 13:53:36,179 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [63]: Updating QualityProfilesDropDownMenuModel.
2020-02-29 13:53:36,809 - INFO - [MainThread] cura.Machines.MachineErrorChecker._setResult [187]: Error check finished, result = False, time = 1.2s
2020-02-29 13:53:36,883 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [741]: Set OctoPrint camera url to http://192.168.2.156:80/webcam/?action=stream
2020-02-29 13:53:39,457 - INFO - [MainThread] UM.Controller.deleteAllNodesWithMeshData [386]: Clearing scene
2020-02-29 13:53:39,467 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: GroupedOp.(#=1) <UM.Operations.RemoveSceneNodeOperation.RemoveSceneNodeOperation object at 0x6000141fe158>, took 5ms
2020-02-29 13:53:39,470 - INFO - [MainThread] cura.CuraApplication._removeNodesWithLayerData [1900]: Clearing scene
2020-02-29 13:53:40,258 - WARNING - [MainThread] cura.UI.PrintInformation.setBaseName [360]: Unsupported Mime Type Database file extension 
2020-02-29 13:53:45,280 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-02-29 13:53:51,777 - INFO - [Thread-5] STLReader.STLReader.load_file [51]: Using NumPy-STL to load STL data.
2020-02-29 13:53:51,784 - DEBUG - [Thread-5] UM.Mesh.MeshData.calculateNormalsFromVertices [495]: Calculating normals took 0.00013017654418945312 seconds
2020-02-29 13:53:51,785 - DEBUG - [Thread-5] STLReader.STLReader._read [102]: Loaded a mesh with 180 vertices
2020-02-29 13:53:51,789 - DEBUG - [Thread-5] UM.Mesh.MeshData.approximateConvexHull [452]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.0011420249938964844 seconds. 10 input vertices. 10 output vertices.
2020-02-29 13:53:51,793 - DEBUG - [Thread-5] UM.FileHandler.ReadFileJob.run [71]: Loading file took 0.0 seconds
2020-02-29 13:53:51,797 - DEBUG - [Thread-5] UM.Mesh.MeshData.approximateConvexHull [452]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.0006239414215087891 seconds. 10 input vertices. 10 output vertices.
2020-02-29 13:53:51,819 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: <UM.Operations.AddSceneNodeOperation.AddSceneNodeOperation object at 0x600014158818>, took 3ms
2020-02-29 13:53:58,340 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: PlatformPhysicsOp.(trans.=<0.0,4.25,0.0>), took 1ms
2020-02-29 13:54:00,622 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._terminate [292]: Attempting to kill the engine process
2020-02-29 13:54:00,629 - DEBUG - [MainThread] UM.Backend.Backend._createSocket [213]: Previous socket existed. Closing that first.
2020-02-29 13:54:00,640 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [173]: Socket state changed to Listening
2020-02-29 13:54:00,674 - INFO - [MainThread] UM.Backend.Backend.startEngine [81]: Started engine process: /Applications/Ultimaker Cura 3.app/Contents/MacOS/CuraEngine
2020-02-29 13:54:00,677 - DEBUG - [MainThread] UM.Backend.Backend._backendLog [101]: [Backend] Calling engine with: ['/Applications/Ultimaker Cura 3.app/Contents/MacOS/CuraEngine', 'connect', '127.0.0.1:49674', '']
2020-02-29 13:54:00,681 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-02-29 13:54:00,686 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] Cura_SteamEngine version 4.5.0
2020-02-29 13:54:00,692 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [177]: Socket state changed to Connected
2020-02-29 13:54:00,694 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] Copyright (C) 2019 Ultimaker
2020-02-29 13:54:00,699 - DEBUG - [MainThread] UM.Backend.Backend._onSocketStateChanged [167]: Backend connected on port 49674
2020-02-29 13:54:00,703 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-02-29 13:54:00,736 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] This program is free software: you can redistribute it and/or modify
2020-02-29 13:54:00,740 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] it under the terms of the GNU Affero General Public License as published by
2020-02-29 13:54:00,747 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] the Free Software Foundation, either version 3 of the License, or
2020-02-29 13:54:00,751 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] (at your option) any later version.
2020-02-29 13:54:00,754 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-02-29 13:54:00,758 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] This program is distributed in the hope that it will be useful,
2020-02-29 13:54:00,761 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] but WITHOUT ANY WARRANTY; without even the implied warranty of
2020-02-29 13:54:00,765 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
2020-02-29 13:54:00,769 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] GNU Affero General Public License for more details.
2020-02-29 13:54:00,774 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-02-29 13:54:00,778 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] You should have received a copy of the GNU Affero General Public License
2020-02-29 13:54:00,781 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'JST Join Jig.stl'>,rot.=Q<-0.13052619222005157,-0.0,-0.0,w=0.9914448613738104>), took 20ms
2020-02-29 13:54:00,785 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] along with this program.  If not, see <http://www.gnu.org/licenses/>.
2020-02-29 13:54:00,871 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'JST Join Jig.stl'>,rot.=Q<-0.13052619222005157,-0.0,-0.0,w=0.9914448613738104>), took 3ms
2020-02-29 13:54:01,021 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'JST Join Jig.stl'>,rot.=Q<-0.13052619222005157,-0.0,-0.0,w=0.9914448613738104>), took 3ms
2020-02-29 13:54:01,188 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'JST Join Jig.stl'>,rot.=Q<-0.13052619222005157,-0.0,-0.0,w=0.9914448613738104>), took 2ms
2020-02-29 13:54:01,338 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'JST Join Jig.stl'>,rot.=Q<-0.13052619222005157,-0.0,-0.0,w=0.9914448613738104>), took 2ms
2020-02-29 13:54:01,438 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'JST Join Jig.stl'>,rot.=Q<-0.25881904510252074,-0.0,-0.0,w=0.9659258262890683>), took 3ms
2020-02-29 13:54:02,173 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'JST Join Jig.stl'>,rot.=Q<0.13052619222005157,0.0,0.0,w=0.9914448613738104>), took 3ms
2020-02-29 13:54:02,284 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-02-29 13:54:02,688 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: PlatformPhysicsOp.(trans.=<0.0,7.0,0.0>), took 1ms
2020-02-29 13:54:04,119 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [225]: Starting to slice...
2020-02-29 13:54:04,120 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [243]: Going to slice build plate [0]!
2020-02-29 13:54:04,133 - WARNING - [Thread-7] UM.Decorators.deprecated_function [20]: <function GlobalStack.extruders at 0x600006f04c78> is deprecated (since 4.4): Please use extruderList instead.
2020-02-29 13:54:04,452 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onStartSliceCompleted [429]: Sending slice message took 0.3318791389465332 seconds
2020-02-29 13:54:04,695 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING]  -s extruders_enabled_count="1" -s support_interface_density="100" -s cool_fan_speed="100.0" -s raft_base_thickness="0.36" -s bridge_skin_material_flow="60" -s slicing_tolerance="middle" -s material_end_of_filament_purge_speed="0.5" -s prime_tower_size="20" -s retraction_retract_speed="25" -s speed_layer_0="30.0" -s infill="0" -s small_feature_speed_factor="50" -s speed_prime_tower="60" -s support_brim_enable="False" -s infill_multiplier="1" -s gradual_support_infill_steps="0" -s initial_extruder_nr="0" -s infill_extruder_nr="-1" -s infill_sparse_density="20" -s bottom_skin_expand_distance="0.8" -s machine_nozzle_cool_down_speed="2.0" -s infill_offset_x="0" -s machine_depth="190" -s adhesion_z_offset_extensive_processing="False" -s limit_support_retractions="True" -s machine_max_acceleration_y="9000" -s infill_offset_y="0" -s acceleration_print_layer_0="3000" -s wall_min_flow_retract="False" -s speed_support_roof="20.0" -s xy_offset_layer_0="0" -s adhesion_type="skirt" -s z_seam_position="back" -s material_guid="" -s magic_spiralize="False" -s material_linear_advance_factor_support_interface="0" -s machine_max_acceleration_x="9000" -s material_linear_advance_factor_infill="0" -s print_temperature="210" -s skin_angles="[ ]" -s gradual_support_infill_step_height="1" -s support_conical_angle="30" -s raft_surface_acceleration="3000" -s jerk_layer_0="20" -s machine_max_feedrate_x="299792458000" -s support_pattern="lines" -s jerk_infill="20" -s speed_equalize_flow_enabled="False" -s top_thickness="0.8" -s bottom_skin_preshrink="0.8" -s raft_surface_line_spacing="0.4" -s wall_line_width="0.4" -s xy_offset="0" -s alternate_carve_order="True" -s travel_avoid_other_parts="True" -s raft_interface_speed="22.5" -s travel_avoid_distance="0.625" -s support_interface_height="1" -s jerk_travel_layer_0="30.0" -s date="29-02-2020" -s wireframe_flow="100" -s machine_acceleration="4000" -s machine_minimum_feedrate="0.0" -s skin_preshrink="0.8" -s jerk_wall="20" -s retract_at_layer_change="False" -s jerk_travel="30" -s support_skip_some_zags="False" -s minimum_roof_area="1.0" -s wireframe_flow_connection="100" -s bridge_skin_density="100" -s skirt_brim_line_width="0.4" -s top_bottom_pattern="lines" -s travel_compensate_overlapping_walls_0_enabled="True" -s flow_rate_max_extrusion_offset="0" -s material_diameter="2.85" -s support_bottom_line_width="0.4" -s raft_smoothing="5" -s speed_topbottom="30.0" -s wireframe_drag_along="0.6" -s material_break_speed="25" -s raft_interface_acceleration="3000" -s minimum_polygon_circumference="1.0" -s support_interface_skip_height="0.3" -s speed_print="60" -s skin_edge_support_layers="0" -s support_type="buildplate" -s support_roof_line_width="0.4" -s wireframe_printspeed_bottom="5" -s raft_surface_line_width="0.4" -s prime_tower_min_volume="6" -s prime_blob_enable="False" -s switch_extruder_prime_speed="20" -s wall_x_extruder_nr="-1" -s machine_steps_per_mm_z="50" -s smooth_spiralized_contours="True" -s ooze_shield_dist="2" -s bridge_wall_material_flow="50" -s cool_fan_full_layer="2" -s roofing_material_flow="100" -s wipe_hop_speed="10" -s infill_angles="[ ]" -s infill_line_distance="4.0" -s minimum_bottom_area="1.0" -s minimum_support_area="0.0" -s material_linear_advance_factor_wall_0="0" -s wall_0_wipe_dist="0.2" -s switch_extruder_extra_prime_amount="0" -s material_extrusion_cool_down_speed="0.7" -s wall_x_material_flow="100" -s support_xy_distance_overhang="0.2" -s wireframe_printspeed_up="5" -s resolution="0" -s retraction_hop="1" -s jerk_wall_0="20" -s skin_material_flow="100" -s support_bottom_density="100" -s jerk_support_interface="20" -s material_print_temperature_layer_0="210" -s retraction_min_travel="0.8" -s support_xy_overrides_z="z_overrides_xy" -s min_infill_area="0" -s machine_nozzle_tip_outer_diameter="1" -s machine_steps_per_mm_x="50" -s material_break_preparation_temperature="210" -s machine_nozzle_size="0.4" -s support_initial_layer_line_distance="0" -s center_object="False" -s spaghetti_inset="0.2" -s mold_enabled="False" -s acceleration_travel="5000" -s acceleration_wall="3000" -s support_bottom_material_flow="100" -s ironing_enabled="False" -s cooling="0" -s support_infill_angles="[ ]" -s shell="0" -s bridge_skin_material_flow_2="100" -s speed_support_interface="40.0" -s meshfix="0" -s acceleration_skirt_brim="3000" -s support_line_distance="0" -s retraction_enable="True" -s retraction_hop_enabled="False" -s switch_extruder_retraction_speed="20" -s acceleration_roofing="3000" -s anti_overhang_mesh="False" -s cool_min_layer_time_fan_speed_max="10" -s wipe_retraction_speed="25" -s retraction_amount="6.5" -s retraction_combing="all" -s material_flow_layer_0="100" -s wall_material_flow="100" -s extruder_prime_pos_z="0" -s support_tower_roof_angle="65" -s connect_skin_polygons="False" -s infill_pattern="grid" -s magic_fuzzy_skin_thickness="0.3" -s meshfix_extensive_stitching="False" -s infill_wipe_dist="0.1" -s skirt_brim_material_flow="100" -s bridge_skin_speed="15.0" -s mesh_position_x="0" -s prime_tower_position_y="165.6" -s jerk_wall_x="20" -s support_bottom_extruder_nr="0" -s support_roof_height="1.2" -s cutting_mesh="False" -s machine_max_jerk_xy="20.0" -s support_material_flow="100" -s bridge_fan_speed="100" -s support_line_width="0.4" -s ooze_shield_enabled="False" -s support_extruder_nr="0" -s wall_thickness="0.8" -s support_bottom_distance="0" -s material_crystallinity="False" -s machine_steps_per_mm_e="1600" -s dual="0" -s support_bottom_enable="False" -s wireframe_nozzle_clearance="1" -s speed_infill="60" -s machine_nozzle_id="unknown" -s wipe_brush_pos_x="100" -s acceleration_travel_layer_0="5000.0" -s meshfix_maximum_deviation="0.05" -s cool_fan_enabled="True" -s wall_overhang_angle="90" -s cool_fan_speed_max="100.0" -s raft_surface_layers="2" -s skirt_brim_minimal_length="250" -s material_linear_advance_factor="0" -s cool_min_layer_time="5" -s day="Sat" -s wipe_retraction_enable="True" -s travel_avoid_supports="False" -s acceleration_infill="3000" -s material_bed_temperature="66" -s bridge_skin_material_flow_3="110" -s bridge_fan_speed_2="0" -s initial_bottom_layers="8" -s support_interface_pattern="concentric" -s cross_infill_density_image="" -s adaptive_layer_height_variation="0.1" -s infill_wall_line_count="0" -s support_supported_skin_fan_speed="100" -s extruder_prime_pos_y="0" -s machine_name="Wanhao Duplicator i3 Plus" -s retraction_prime_speed="25" -s material_linear_advance_factor_prime_tower="0" -s z_seam_type="sharpest_corner" -s meshfix_keep_open_polygons="False" -s support_use_towers="True" -s infill_support_enabled="False" -s cool_fan_speed_0="0" -s support_brim_line_count="20" -s blackmagic="0" -s material_print_temp_wait="True" -s support_roof_angles="[ ]" -s infill_mesh_order="0" -s support="0" -s spaghetti_infill_enabled="False" -s acceleration_support="3000" -s support_interface_offset="0.0" -s support_tree_enable="True" -s acceleration_wall_0="3000" -s wireframe_top_jump="0.6" -s jerk_support_bottom="20" -s speed_support_bottom="20.0" -s support_conical_min_width="5.0" -s bottom_layers="8" -s material_flow_dependent_temperature="False" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s support_wall_count="1" -s machine_max_acceleration_z="100" -s skin_edge_support_thickness="0" -s coasting_min_volume="0.8" -s material_linear_advance_factor_wall="0" -s cool_fan_full_at_height="0.3" -s draft_shield_dist="10" -s layer_height="0.1" -s material_break_preparation_retracted_position="-16" -s infill_mesh="False" -s mold_angle="40" -s raft_speed="30.0" -s machine_max_jerk_z="0.4" -s support_tree_angle="40" -s wall_line_width_0="0.4" -s cross_infill_pocket_size="4.0" -s machine_max_jerk_e="5.0" -s raft_margin="15" -s raft_surface_speed="30.0" -s infill_enable_travel_optimization="False" -s machine_height="180" -s travel_retract_before_outer_wall="False" -s infill_support_angle="40" -s adaptive_layer_height_variation_step="0.01" -s raft_surface_jerk="20" -s bridge_sparse_infill_max_density="0" -s wireframe_printspeed_flat="5" -s draft_shield_height_limitation="full" -s magic_fuzzy_skin_enabled="False" -s jerk_enabled="False" -s support_mesh_drop_down="True" -s wireframe_roof_fall_down="2" -s wireframe_strategy="compensate" -s machine_gcode_flavor="RepRap (Marlin/Sprinter)" -s conical_overhang_angle="50" -s infill_overlap_mm="0.04" -s mesh_position_z="0" -s travel_speed="120" -s speed="0" -s small_hole_max_size="0" -s material_bed_temp_prepend="True" -s material="0" -s infill_before_walls="True" -s meshfix_maximum_resolution="0.5" -s wipe_repeat_count="5" -s support_tree_branch_distance="1" -s retraction_speed="25" -s gradual_infill_steps="0" -s machine_show_variants="False" -s support_interface_material_flow="100" -s infill_overlap="10" -s jerk_support="20" -s wall_line_width_x="0.4" -s roofing_extruder_nr="-1" -s raft_base_acceleration="3000" -s wall_extruder_nr="-1" -s adaptive_layer_height_threshold="0.2" -s min_skin_width_for_expansion="4.898587196589413e-17" -s material_no_load_move_factor="0.940860215" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s max_skin_angle_for_expansion="90" -s sub_div_rad_add="0.4" -s support_tree_branch_diameter_angle="5" -s top_bottom_pattern_0="lines" -s alternate_extra_perimeter="False" -s support_roof_enable="True" -s bridge_wall_coast="100" -s raft_interface_fan_speed="0" -s support_offset="0" -s wireframe_fall_down="0.5" -s material_flow="100" -s cross_support_density_image="" -s wireframe_height="3" -s z_seam_relative="False" -s support_tower_maximum_supported_diameter="3.0" -s support_interface_extruder_nr="0" -s nozzle_disallowed_areas="[]" -s support_xy_distance="0.7" -s speed_wall="30.0" -s bridge_enable_more_layers="True" -s conical_overhang_enabled="False" -s speed_travel_layer_0="60.0" -s draft_shield_height="10" -s z_seam_x="100.0" -s retraction_combing_max_distance="0" -s support_infill_rate="0" -s spaghetti_max_infill_angle="10" -s acceleration_support_interface="3000" -s machine_feeder_wheel_diameter="10.0" -s retraction_hop_only_when_collides="False" -s extruder_prime_pos_x="0" -s build_volume_temperature="28" -s layer_start_y="0.0" -s material_break_retracted_position="-50" -s material_initial_print_temperature="200" -s support_infill_extruder_nr="0" -s coasting_speed="90" -s carve_multiple_volumes="False" -s flow_rate_extrusion_offset_factor="100" -s acceleration_wall_x="3000" -s skin_overlap_mm="0.02" -s small_feature_max_length="0.0" -s wall_0_extruder_nr="-1" -s material_maximum_park_duration="300" -s machine_nozzle_temp_enabled="True" -s switch_extruder_retraction_amount="16" -s skirt_brim_speed="30.0" -s wipe_retraction_extra_prime_amount="0" -s ironing_only_highest_layer="False" -s acceleration_topbottom="3000" -s machine_settings="0" -s adhesion_extruder_nr="0" -s mold_width="5" -s jerk_support_infill="20" -s wall_overhang_speed_factor="100" -s jerk_prime_tower="20" -s skin_outline_count="1" -s bridge_skin_speed_2="15.0" -s machine_max_feedrate_y="299792458000" -s support_roof_material_flow="100" -s bridge_skin_density_2="75" -s support_tower_diameter="3.0" -s material_linear_advance_factor_support="0" -s command_line_settings="0" -s brim_replaces_support="True" -s prime_tower_wipe_enabled="True" -s fill_perimeter_gaps="everywhere" -s skin_overlap="5" -s print_sequence="all_at_once" -s acceleration_support_infill="3000" -s brim_gap="0" -s spaghetti_infill_extra_volume="0" -s support_connect_zigzags="True" -s adaptive_layer_height_enabled="False" -s travel_compensate_overlapping_walls_enabled="True" -s roofing_pattern="lines" -s fill_outline_gaps="False" -s support_zag_skip_count="0" -s machine_filament_park_distance="16" -s acceleration_print="3000" -s material_linear_advance_factor_wall_x="0" -s material_final_print_temperature="195" -s ooze_shield_angle="60" -s machine_endstop_positive_direction_x="False" -s travel_compensate_overlapping_walls_x_enabled="True" -s coasting_volume="0.064" -s machine_endstop_positive_direction_z="True" -s small_feature_speed_factor_0="50" -s machine_shape="rectangular" -s machine_heated_bed="True" -s machine_use_extruder_offset_to_offset_coords="True" -s brim_outside_only="True" -s material_standby_temperature="150" -s support_bottom_stair_step_height="0.3" -s speed_roofing="30.0" -s roofing_line_width="0.4" -s material_print_temp_prepend="True" -s wireframe_printspeed_down="5" -s minimum_interface_area="1.0" -s draft_shield_enabled="False" -s speed_support="60" -s adhesion_z_offset="0" -s wireframe_roof_outer_delay="0.2" -s ironing_inset="0.2" -s bridge_fan_speed_3="0" -s initial_layer_line_width_factor="100.0" -s machine_start_gcode="" -s experimental="0" -s bridge_wall_min_length="5" -s prime_tower_position_x="195.6" -s wipe_retraction_amount="6.5" -s material_break_temperature="50" -s top_bottom_extruder_nr="-1" -s acceleration_support_roof="3000" -s support_roof_offset="0.0" -s wall_0_material_flow="100" -s wireframe_flow_flat="100" -s speed_print_layer_0="30.0" -s default_material_bed_temperature="60" -s raft_jerk="20" -s machine_end_gcode="" -s machine_center_is_zero="False" -s support_conical_enabled="False" -s material_anti_ooze_retraction_speed="5" -s machine_head_with_fans_polygon="[[-20, 10], [10, 10], [10, -10], [-20, -10]]" -s z_seam_corner="z_seam_corner_inner" -s support_interface_angles="[ ]" -s bottom_thickness="0.8" -s raft_interface_line_spacing="1.0" -s material_flush_purge_length="60" -s machine_nozzle_heat_up_speed="2.0" -s cool_fan_speed_min="100.0" -s wipe_move_distance="20" -s bridge_skin_speed_3="15.0" -s magic_fuzzy_skin_point_dist="0.8" -s filter_out_tiny_gaps="True" -s spaghetti_flow="20" -s machine_heated_build_volume="False" -s extruder_prime_pos_abs="False" -s material_adhesion_tendency="10" -s infill_sparse_thickness="0.1" -s speed_wall_0="30.0" -s machine_extruders_share_heater="False" -s cool_lift_head="False" -s zig_zaggify_infill="False" -s acceleration_enabled="False" -s support_roof_extruder_nr="0" -s layer_start_x="0.0" -s machine_min_cool_heat_time_window="50.0" -s multiple_mesh_overlap="0.15" -s wipe_retraction_retract_speed="25" -s support_bottom_pattern="concentric" -s material_break_preparation_speed="2" -s acceleration_support_bottom="3000" -s material_end_of_filament_purge_length="20" -s wireframe_roof_drag_along="0.8" -s support_bottom_line_distance="0.4" -s wall_min_flow="0" -s ironing_flow="10.0" -s acceleration_prime_tower="3000" -s retraction_hop_after_extruder_switch_height="1" -s skirt_gap="3" -s speed_ironing="20.0" -s machine_max_acceleration_e="10000" -s line_width="0.4" -s zig_zaggify_support="False" -s wipe_hop_enable="False" -s optimize_wall_printing_order="False" -s raft_interface_line_width="0.8" -s gantry_height="180" -s material_surface_energy="100" -s print_bed_temperature="66" -s magic_mesh_surface_mode="normal" -s raft_fan_speed="0" -s wireframe_up_half_speed="0.3" -s machine_max_feedrate_e="299792458000" -s spaghetti_infill_stepped="True" -s raft_surface_fan_speed="0" -s meshfix_union_all_remove_holes="False" -s speed_wall_x="60.0" -s raft_base_jerk="20" -s machine_extruder_count="1" -s jerk_support_roof="20" -s wireframe_top_delay="0" -s machine_endstop_positive_direction_y="False" -s jerk_topbottom="20" -s remove_empty_first_layers="True" -s support_bottom_height="1" -s raft_acceleration="3000" -s jerk_print_layer_0="20" -s wireframe_roof_inset="3" -s material_anti_ooze_retracted_position="-4" -s expand_skins_expand_distance="0.8" -s bridge_wall_speed="15.0" -s support_bottom_offset="0.0" -s wireframe_flat_delay="0.1" -s machine_nozzle_expansion_angle="45" -s brim_line_count="8" -s support_roof_line_distance="0.4" -s prime_tower_line_width="0.4" -s infill_line_width="0.4" -s magic_fuzzy_skin_outside_only="False" -s speed_equalize_flow_max="150" -s jerk_roofing="20" -s raft_base_line_width="0.8" -s coasting_enable="False" -s support_interface_line_width="0.4" -s support_bottom_angles="[ ]" -s support_skip_zag_per_mm="20" -s support_extruder_nr_layer_0="0" -s meshfix_maximum_travel_resolution="0.8" -s cool_min_speed="10" -s machine_disallowed_areas="[]" -s support_interface_enable="False" -s bridge_skin_density_3="80" -s machine_max_feedrate_z="299792458000" -s support_roof_density="100" -s spaghetti_max_height="2.0" -s skirt_line_count="4" -s retraction_count_max="90" -s retraction_extrusion_window="6.5" -s support_fan_enable="False" -s support_roof_pattern="concentric" -s support_mesh="False" -s wireframe_straight_before_down="20" -s material_print_temperature="210" -s retraction_extra_prime_amount="0" -s wireframe_printspeed="5" -s machine_steps_per_mm_y="50" -s support_tree_branch_diameter="2" -s speed_slowdown_layers="2" -s default_material_print_temperature="210" -s roofing_layer_count="0" -s relative_extrusion="False" -s wall_0_inset="0" -s brim_width="8.0" -s speed_support_infill="60" -s raft_base_line_spacing="1.6" -s max_extrusion_before_wipe="10" -s ironing_pattern="zigzag" -s speed_travel="120" -s support_angle="70" -s raft_base_speed="22.5" -s layer_0_z_overlap="0.15" -s speed_z_hop="10" -s platform_adhesion="0" -s support_bottom_stair_step_width="5.0" -s raft_interface_jerk="20" -s material_shrinkage_percentage="0" -s ironing_line_spacing="0.1" -s skin_line_width="0.4" -s connect_infill_polygons="False" -s wireframe_bottom_delay="0" -s mesh_position_y="0" -s infill_randomize_start_location="False" -s machine_nozzle_head_distance="3" -s support_brim_width="8.0" -s top_layers="8" -s support_infill_sparse_thickness="0.1" -s material_bed_temperature_layer_0="66" -s clean_between_layers="False" -s travel="0" -s material_bed_temp_wait="True" -s raft_airgap="0.3" -s material_flush_purge_speed="0.5" -s support_enable="False" -s prime_tower_enable="False" -s raft_surface_thickness="0.1" -s jerk_skirt_brim="20" -s machine_heat_zone_length="16" -s gradual_infill_step_height="1.5" -s outer_inset_first="False" -s prime_tower_brim_enable="False" -s top_skin_preshrink="0.8" -s top_skin_expand_distance="0.8" -s jerk_print="20" -s mold_roof_height="0.5" -s jerk_ironing="20" -s roofing_angles="[ ]" -s support_top_distance="0.1" -s retraction_hop_after_extruder_switch="True" -s material_linear_advance_factor_skirt_brim="0" -s layer_height_0="0.3" -s switch_extruder_retraction_speeds="20" -s machine_firmware_retract="False" -s meshfix_union_all="True" -s support_z_distance="0.1" -s bridge_settings_enabled="False" -s z_seam_y="190" -s acceleration_layer_0="3000" -s raft_interface_thickness="0.15000000000000002" -s wall_line_count="2" -s magic_fuzzy_skin_point_density="1.25" -s top_bottom_thickness="0.8" -s machine_width="200" -s prime_tower_flow="100" -s acceleration_ironing="3000" -s raft_base_fan_speed="0" -s support_tree_collision_resolution="0.2" -s skin_no_small_gaps_heuristic="False" -s wipe_hop_amount="1" -s support_join_distance="2.0" -s machine_buildplate_type="glass" -s time="13:54:04" -s infill_material_flow="100" -s wireframe_enabled="False" -s material_linear_advance_factor_topbottom="0" -s wipe_retraction_prime_speed="25" -s wipe_pause="0" -s bridge_skin_support_threshold="50" -e0 -s switch_extruder_retraction_speeds="20" -s support_interface_density="100" -s cool_fan_speed="80" -s raft_base_thickness="0.36" -s machine_nozzle_offset_x="0" -s initial_layer_line_width_factor="100.0" -s bridge_skin_material_flow="60" -s material_end_of_filament_purge_speed="0.5" -s retraction_retract_speed="40" -s speed_layer_0="12" -s infill="0" -s small_feature_speed_factor="50" -s support_infill_sparse_thickness="0.1" -s speed_prime_tower="30" -s support_brim_enable="False" -s infill_multiplier="1" -s gradual_support_infill_steps="0" -s infill_sparse_density="64" -s bottom_skin_expand_distance="2.4" -s machine_nozzle_cool_down_speed="2.0" -s infill_offset_x="0" -s limit_support_retractions="True" -s machine_extruder_end_pos_x="0" -s infill_offset_y="0" -s acceleration_print_layer_0="3000" -s wall_min_flow_retract="False" -s speed_support_roof="20.0" -s xy_offset_layer_0="0" -s z_seam_position="back" -s material_guid="0ff92885-617b-4144-a03c-9989872454bc" -s material_linear_advance_factor_support_interface="0" -s material_linear_advance_factor_infill="0" -s material_break_preparation_speed="2" -s acceleration_support_bottom="3000" -s material_end_of_filament_purge_length="20" -s gradual_support_infill_step_height="1" -s support_conical_angle="30" -s raft_surface_acceleration="3000" -s support_roof_pattern="concentric" -s jerk_layer_0="20" -s support_pattern="lines" -s jerk_infill="20" -s speed_equalize_flow_enabled="False" -s top_thickness="0.8" -s bottom_skin_preshrink="2.4" -s raft_surface_line_spacing="0.4" -s skin_edge_support_layers="0" -s wall_line_width="0.4" -s xy_offset="0" -s travel_avoid_other_parts="True" -s raft_interface_speed="11.25" -s travel_avoid_distance="0.625" -s support_interface_height="1" -s wipe_move_distance="20" -s cool_fan_speed_min="80" -s acceleration_skirt_brim="3000" -s meshfix="0" -s support_bottom_material_flow="100" -s acceleration_wall="3000" -s ironing_enabled="False" -s acceleration_travel="5000" -s support_supported_skin_fan_speed="100" -s infill_wall_line_count="0" -s support_wall_count="1" -s skin_edge_support_thickness="0" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s experimental="0" -s support_skip_some_zags="False" -s travel_compensate_overlapping_walls_0_enabled="True" -s support_bottom_line_width="0.4" -s material_flow="100" -s support_offset="0" -s raft_smoothing="5" -s speed_topbottom="15.0" -s wipe_hop_enable="False" -s zig_zaggify_support="False" -s speed_print="30" -s prime_tower_min_volume="6" -s jerk_travel="30" -s material_linear_advance_factor_skirt_brim="0" -s support_tree_branch_diameter="2" -s machine_steps_per_mm_y="50" -s acceleration_support_interface="3000" -s spaghetti_max_infill_angle="10" -s bridge_wall_material_flow="50" -s wipe_hop_speed="10" -s jerk_wall_0="20" -s retraction_hop="1" -s wipe_pause="0" -s wipe_retraction_prime_speed="40" -s minimum_support_area="0.0" -s material_linear_advance_factor_wall_0="0" -s wall_0_wipe_dist="0.2" -s switch_extruder_extra_prime_amount="0" -s support_tower_maximum_supported_diameter="3.0" -s spaghetti_infill_extra_volume="0" -s support_connect_zigzags="True" -s support_xy_distance_overhang="0.2" -s bridge_skin_density_3="80" -s support_interface_enable="False" -s resolution="0" -s support_line_width="0.4" -s material_break_preparation_retracted_position="-16" -s support_xy_overrides_z="z_overrides_xy" -s min_infill_area="0" -s machine_nozzle_tip_outer_diameter="1" -s machine_steps_per_mm_x="50" -s infill_angles="[ ]" -s minimum_interface_area="1.0" -s skirt_brim_line_width="0.4" -s top_bottom_pattern="lines" -s cool_fan_full_layer="2" -s center_object="False" -s spaghetti_inset="0.2" -s gradual_infill_steps="0" -s jerk_travel_layer_0="30.0" -s mold_enabled="False" -s raft_surface_line_width="0.4" -s cooling="0" -s support_tree_collision_resolution="0.2" -s raft_base_fan_speed="0" -s material_print_temperature_layer_0="220" -s raft_interface_line_spacing="1.0" -s machine_nozzle_heat_up_speed="2.0" -s material_flush_purge_length="60" -s bridge_skin_material_flow_2="100" -s speed_support_interface="20.0" -s support_interface_offset="0.0" -s jerk_support="20" -s wall_line_width_x="0.4" -s support_line_distance="0" -s retraction_enable="True" -s switch_extruder_retraction_speed="20" -s retraction_hop_enabled="False" -s acceleration_roofing="3000" -s cool_min_layer_time_fan_speed_max="10" -s wipe_retraction_speed="40" -s retraction_amount="2.5" -s raft_speed="15.0" -s mold_angle="40" -s material_flow_layer_0="100" -s wall_material_flow="100" -s bridge_skin_material_flow_3="110" -s bridge_fan_speed_2="0" -s initial_bottom_layers="6" -s support_interface_pattern="concentric" -s connect_skin_polygons="False" -s infill_pattern="gyroid" -s material_flow_dependent_temperature="False" -s bottom_layers="6" -s magic_fuzzy_skin_thickness="0.3" -s meshfix_extensive_stitching="False" -s infill_wipe_dist="0.1" -s machine_extruder_start_pos_abs="False" -s skirt_brim_material_flow="100" -s bridge_skin_speed="10" -s jerk_wall_x="20" -s wipe_retraction_amount="2.5" -s material_break_temperature="50" -s support_roof_height="1.2" -s magic_fuzzy_skin_enabled="False" -s connect_infill_polygons="False" -s machine_extruder_start_code="" -s support_material_flow="100" -s bridge_fan_speed="100" -s bridge_sparse_infill_max_density="0" -s wall_thickness="0.8" -s support_bottom_distance="0" -s material_crystallinity="False" -s machine_steps_per_mm_e="1600" -s jerk_wall="20" -s dual="0" -s support_bottom_enable="False" -s skin_overlap="5" -s speed_infill="30" -s machine_nozzle_id="unknown" -s wipe_brush_pos_x="100" -s acceleration_travel_layer_0="5000.0" -s raft_surface_layers="2" -s skirt_brim_minimal_length="250" -s material_linear_advance_factor="0" -s cool_min_layer_time="5" -s wipe_retraction_enable="True" -s travel_avoid_supports="False" -s acceleration_infill="3000" -s speed_ironing="10.0" -s support_roof_line_width="0.4" -s extruder_prime_pos_y="0" -s material_linear_advance_factor_prime_tower="0" -s retraction_prime_speed="40" -s z_seam_type="sharpest_corner" -s prime_blob_enable="False" -s meshfix_keep_open_polygons="False" -s raft_surface_speed="15.0" -s infill_enable_travel_optimization="False" -s machine_nozzle_temp_enabled="True" -s switch_extruder_retraction_amount="16" -s skirt_brim_speed="12" -s material_maximum_park_duration="300" -s infill_material_flow="100" -s support_use_towers="True" -s infill_support_enabled="False" -s cool_fan_speed_0="0" -s support_brim_line_count="20" -s blackmagic="0" -s multiple_mesh_overlap="0.15" -s wipe_retraction_retract_speed="40" -s material_linear_advance_factor_wall_x="0" -s acceleration_print="3000" -s support_bottom_pattern="concentric" -s meshfix_maximum_deviation="0.05" -s cool_fan_enabled="True" -s wall_overhang_angle="90" -s cool_fan_speed_max="80" -s machine_extruder_end_code="" -s support_roof_angles="[ ]" -s retraction_hop_after_extruder_switch_height="1" -s machine_extruder_end_pos_abs="False" -s support="0" -s spaghetti_infill_enabled="False" -s acceleration_support="3000" -s acceleration_wall_0="3000" -s jerk_support_bottom="20" -s material_extrusion_cool_down_speed="0.7" -s speed_support_bottom="20.0" -s support_conical_min_width="5.0" -s coasting_min_volume="0.8" -s material_linear_advance_factor_wall="0" -s cool_fan_full_at_height="0.3" -s support_infill_angles="[ ]" -s shell="0" -s support_tower_diameter="3.0" -s machine_extruder_start_pos_x="0" -s wipe_hop_amount="1" -s support_join_distance="2.0" -s support_tree_angle="40" -s fill_perimeter_gaps="everywhere" -s prime_tower_wipe_enabled="True" -s machine_heat_zone_length="16" -s jerk_skirt_brim="20" -s raft_jerk="20" -s speed_print_layer_0="12" -s command_line_settings="0" -s material_linear_advance_factor_support="0" -s conical_overhang_angle="50" -s infill_overlap_mm="0.05600000000000001" -s mesh_position_z="0" -s speed="0" -s material_diameter="1.75" -s meshfix_union_all_remove_holes="False" -s gradual_infill_step_height="1.5" -s cool_lift_head="False" -s speed_wall_0="15.0" -s outer_inset_first="False" -s extruder_prime_pos_z="0" -s support_tower_roof_angle="65" -s meshfix_maximum_resolution="0.5" -s wipe_repeat_count="5" -s support_tree_branch_distance="1" -s wall_x_material_flow="100" -s min_skin_width_for_expansion="3.67394039744206e-17" -s material_no_load_move_factor="0.940860215" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s max_skin_angle_for_expansion="90" -s top_bottom_pattern_0="lines" -s alternate_extra_perimeter="False" -s support_roof_enable="True" -s slicing_tolerance="exclusive" -s machine_extruder_end_pos_y="0" -s cross_support_density_image="" -s z_seam_relative="False" -s support_xy_distance="0.7" -s speed_wall="15.0" -s material_final_print_temperature="205" -s machine_endstop_positive_direction_x="False" -s bridge_enable_more_layers="True" -s conical_overhang_enabled="False" -s speed_travel_layer_0="60.0" -s fill_outline_gaps="False" -s machine_filament_park_distance="16" -s support_zag_skip_count="0" -s material_break_retracted_position="-50" -s material_initial_print_temperature="210" -s switch_extruder_prime_speed="20" -s extruder_prime_pos_x="0" -s layer_start_y="0.0" -s filter_out_tiny_gaps="True" -s bridge_skin_speed_3="10" -s spaghetti_flow="20" -s magic_fuzzy_skin_point_dist="0.8" -s coasting_speed="90" -s skin_material_flow="100" -s support_bottom_density="100" -s acceleration_wall_x="3000" -s skin_overlap_mm="0.02" -s small_feature_max_length="0.0" -s support_initial_layer_line_distance="0" -s support_bottom_offset="0.0" -s bridge_wall_speed="10" -s meshfix_union_all="True" -s support_z_distance="0.1" -s infill_line_distance="0.625" -s minimum_bottom_area="1.0" -s retraction_combing_max_distance="0" -s z_seam_x="100.0" -s expand_skins_expand_distance="2.4" -s mesh_position_x="0" -s wipe_retraction_extra_prime_amount="0" -s jerk_support_roof="20" -s machine_endstop_positive_direction_y="False" -s coasting_volume="0.064" -s machine_endstop_positive_direction_z="True" -s small_feature_speed_factor_0="50" -s infill_support_angle="40" -s raft_surface_jerk="20" -s support_interface_skip_height="0.3" -s mold_width="5" -s infill_before_walls="True" -s material="0" -s jerk_support_infill="20" -s wall_overhang_speed_factor="100" -s jerk_prime_tower="20" -s skin_outline_count="1" -s material_anti_ooze_retraction_speed="5" -s support_conical_enabled="False" -s bridge_skin_speed_2="10" -s retract_at_layer_change="False" -s raft_base_jerk="20" -s speed_wall_x="30.0" -s support_roof_material_flow="100" -s bridge_skin_density_2="75" -s brim_replaces_support="True" -s acceleration_support_infill="3000" -s brim_gap="0" -s travel_compensate_overlapping_walls_enabled="True" -s roofing_pattern="lines" -s travel_compensate_overlapping_walls_x_enabled="True" -s wall_line_width_0="0.4" -s cross_infill_pocket_size="0.625" -s raft_margin="15" -s support_bottom_stair_step_height="0.3" -s brim_outside_only="True" -s material_standby_temperature="175" -s speed_roofing="15.0" -s roofing_line_width="0.4" -s speed_support="30" -s ironing_inset="0.2" -s bridge_fan_speed_3="0" -s support_tree_branch_diameter_angle="5" -s support_infill_rate="0" -s infill_randomize_start_location="False" -s mesh_position_y="0" -s wall_line_count="6" -s magic_fuzzy_skin_point_density="1.25" -s platform_adhesion="0" -s support_bottom_stair_step_width="5.0" -s speed_z_hop="10" -s retraction_speed="40" -s wall_0_material_flow="100" -s cool_min_speed="10" -s bridge_skin_density="100" -s raft_base_line_width="0.8" -s machine_nozzle_offset_y="0" -s extruder_nr="0" -s infill_overlap="14" -s support_interface_material_flow="100" -s magic_mesh_surface_mode="normal" -s raft_fan_speed="0" -s raft_interface_line_width="0.8" -s material_surface_energy="100" -s retraction_extrusion_window="2.5" -s support_fan_enable="False" -s machine_extruder_start_pos_y="0" -s extruder_prime_pos_abs="False" -s material_adhesion_tendency="0" -s infill_sparse_thickness="0.1" -s skin_no_small_gaps_heuristic="False" -s machine_nozzle_head_distance="3" -s support_brim_width="8.0" -s top_layers="6" -s material_break_preparation_temperature="220" -s layer_start_x="0.0" -s machine_min_cool_heat_time_window="50.0" -s support_bottom_line_distance="0.4" -s zig_zaggify_infill="False" -s wall_min_flow="0" -s ironing_flow="10.0" -s support_roof_offset="0.0" -s acceleration_support_roof="3000" -s acceleration_prime_tower="3000" -s skirt_gap="3" -s line_width="0.4" -s optimize_wall_printing_order="False" -s raft_acceleration="3000" -s support_bottom_height="1" -s raft_base_acceleration="3000" -s skirt_line_count="4" -s retraction_count_max="90" -s ironing_only_highest_layer="False" -s acceleration_topbottom="3000" -s machine_settings="0" -s small_hole_max_size="0" -s brim_line_count="8" -s support_roof_line_distance="0.4" -s infill_line_width="0.4" -s magic_fuzzy_skin_outside_only="False" -s prime_tower_line_width="0.4" -s jerk_print_layer_0="20" -s material_anti_ooze_retracted_position="-4" -s support_interface_angles="[ ]" -s bottom_thickness="0.8" -s speed_equalize_flow_max="150" -s jerk_roofing="20" -s minimum_roof_area="1.0" -s machine_extruder_cooling_fan_number="0" -s machine_nozzle_size="0.4" -s raft_interface_jerk="20" -s material_shrinkage_percentage="0" -s support_roof_density="100" -s spaghetti_max_height="2.0" -s bridge_skin_support_threshold="50" -s material_linear_advance_factor_topbottom="0" -s material_print_temperature="220" -s retraction_extra_prime_amount="0" -s default_material_print_temperature="200" -s roofing_layer_count="0" -s wall_0_inset="0" -s brim_width="8.0" -s speed_support_infill="30" -s raft_base_line_spacing="1.6" -s max_extrusion_before_wipe="10" -s roofing_material_flow="100" -s prime_tower_flow="100" -s acceleration_ironing="3000" -s raft_interface_acceleration="3000" -s spaghetti_infill_stepped="True" -s raft_surface_fan_speed="0" -s jerk_print="20" -s z_seam_y="190" -s retraction_min_travel="0.8" -s acceleration_layer_0="3000" -s material_break_speed="25" -s ironing_line_spacing="0.1" -s raft_airgap="0.3" -s material_flush_purge_speed="0.5" -s skin_line_width="0.4" -s machine_steps_per_mm_z="50" -s skin_angles="[ ]" -s skin_preshrink="2.4" -s clean_between_layers="False" -s travel="0" -s raft_surface_thickness="0.1" -s top_skin_preshrink="2.4" -s jerk_support_interface="20" -s cross_infill_density_image="" -s support_interface_line_width="0.4" -s support_skip_zag_per_mm="20" -s support_bottom_angles="[ ]" -s ironing_pattern="zigzag" -s speed_travel="150" -s support_angle="70" -s raft_base_speed="11.25" -s layer_0_z_overlap="0.15" -s top_skin_expand_distance="2.4" -s sub_div_rad_add="0.4" -s z_seam_corner="z_seam_corner_inner" -s roofing_angles="[ ]" -s jerk_ironing="20" -s top_bottom_thickness="0.8" -s support_top_distance="0.1" -s retraction_hop_after_extruder_switch="True" -s jerk_topbottom="20" -s bridge_wall_coast="100" -s raft_interface_fan_speed="0" -s raft_interface_thickness="0.15000000000000002" -s meshfix_maximum_travel_resolution="0.8" -s machine_feeder_wheel_diameter="10.0" -s retraction_hop_only_when_collides="False" -s coasting_enable="False" -s mold_roof_height="0.5" -g -e0 -l "0" -s extruder_nr="0"
2020-02-29 13:54:05,213 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 222 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-02-29 13:54:05,473 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 13:54:05,476 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 13:54:05,482 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [663]: Slicing took 1.362436056137085 seconds
2020-02-29 13:54:05,482 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [664]: Number of models per buildplate: {0: 1}
2020-02-29 13:54:05,482 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [678]: See if there is more to slice...
2020-02-29 13:54:05,702 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [181]: Socket state changed to Closing
2020-02-29 13:54:05,705 - DEBUG - [MainThread] UM.Backend.Backend._onSocketError [203]: Socket debug: Arcus Error (13): Closing socket because other side requested close.
2020-02-29 13:54:05,705 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onBackendQuit [829]: Backend quit with return code 0. Resetting process and socket.
2020-02-29 13:54:05,707 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [183]: Socket state changed to Closed
2020-02-29 14:00:11,378 - DEBUG - [MainThread] LinearAdvanceSettingPlugin.LinearAdvanceSettingPlugin._filterGcode [109]: No used extruders specify a linear advance factor
2020-02-29 14:00:11,608 - DEBUG - [MainThread] UM.Controller.setActiveStage [149]: Setting active stage to MonitorStage
2020-02-29 14:00:11,659 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:211: Error: Cannot assign [undefined] to QString
2020-02-29 14:00:11,683 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._processRequest [308]: Request [0e48c98bd253409aaaa3477f6cd1ddc4] started
2020-02-29 14:00:11,686 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-02-29 14:00:12,061 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-02-29 14:00:12,317 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestFinished [369]: Request [0e48c98bd253409aaaa3477f6cd1ddc4] finished.
2020-02-29 14:00:12,319 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-02-29 14:00:12,320 - INFO - [MainThread] SliceInfoPlugin.SliceInfo._onRequestFinished [275]: SliceInfo sent successfully
2020-02-29 14:00:21,291 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-02-29 14:00:42,290 - DEBUG - [MainThread] UM.Message._onInactivityTriggered [88]: Hiding message because of inactivity
2020-02-29 14:00:49,706 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [772]: Resource created on OctoPrint instance: http://192.168.2.156/api/files/local/WDI3P_JST_Join_Jig.gcode
2020-02-29 14:01:19,291 - DEBUG - [MainThread] UM.Message._onInactivityTriggered [88]: Hiding message because of inactivity
2020-02-29 14:04:37,911 - DEBUG - [MainThread] UM.Controller.setActiveStage [149]: Setting active stage to PrepareStage
2020-02-29 14:04:37,947 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-02-29 14:04:38,013 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 14:04:38,017 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 14:04:38,026 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/plugins/plugins/PrepareStage/PrepareMain.qml:16:5: QML ActionPanelWidget: Binding loop detected for property "width"
2020-02-29 14:04:38,045 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:79: ReferenceError: stop is not defined
2020-02-29 14:04:38,049 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:63: TypeError: Cannot read property of null
2020-02-29 14:04:38,051 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:91: TypeError: Cannot read property of null
2020-02-29 14:04:38,054 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:102: TypeError: Cannot read property of null
2020-02-29 14:04:38,056 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:103: TypeError: Cannot read property of null
2020-02-29 14:04:38,058 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:139: TypeError: Cannot read property of null
2020-02-29 14:04:38,061 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:140: TypeError: Cannot read property of null
2020-02-29 14:04:38,064 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:120: TypeError: Cannot read property of null
2020-02-29 14:04:38,066 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:122: TypeError: Cannot read property of null
2020-02-29 14:04:38,068 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-02-29 14:04:38,071 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:36: TypeError: Cannot read property of null
2020-02-29 14:04:38,073 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:37: TypeError: Cannot read property of null
2020-02-29 14:04:38,075 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:49: TypeError: Cannot read property of null
2020-02-29 14:04:38,077 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:59: TypeError: Cannot read property of null
2020-02-29 14:04:38,080 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:61: TypeError: Cannot read property of null
2020-02-29 14:04:38,082 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:63: TypeError: Cannot read property of null
2020-02-29 14:04:38,084 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ExtruderBox.qml:20: TypeError: Cannot read property of null
2020-02-29 14:04:38,087 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:29: TypeError: Cannot read property of null
2020-02-29 14:04:38,089 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:30: TypeError: Cannot read property of null
2020-02-29 14:04:38,091 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:40: TypeError: Cannot read property of null
2020-02-29 14:04:38,093 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:73: TypeError: Cannot read property of null
2020-02-29 14:04:38,095 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:135: TypeError: Cannot read property of null
2020-02-29 14:04:38,098 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:246: TypeError: Cannot read property of null
2020-02-29 14:04:38,100 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:247: TypeError: Cannot read property of null
2020-02-29 14:04:38,102 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:173: TypeError: Cannot read property of null
2020-02-29 14:04:38,105 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:175: TypeError: Cannot read property of null
2020-02-29 14:04:38,107 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:190: TypeError: Cannot read property of null
2020-02-29 14:04:38,110 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:193: TypeError: Cannot read property of null
2020-02-29 14:04:38,113 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:60: TypeError: Cannot read property of null
2020-02-29 14:04:38,115 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:248: TypeError: Cannot read property of null
2020-02-29 14:04:38,118 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:294: TypeError: Cannot read property of null
2020-02-29 14:04:38,120 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:26: TypeError: Cannot read property of null
2020-02-29 14:04:38,122 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:27: TypeError: Cannot read property of null
2020-02-29 14:04:38,126 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:388: TypeError: Cannot read property of null
2020-02-29 14:04:38,128 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:390: TypeError: Cannot read property of null
2020-02-29 14:04:38,130 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:391: TypeError: Cannot read property of null
2020-02-29 14:04:38,133 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:26: TypeError: Cannot read property of null
2020-02-29 14:04:38,135 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:27: TypeError: Cannot read property of null
2020-02-29 14:04:38,137 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:24: TypeError: Cannot read property of null
2020-02-29 14:04:38,140 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:30: TypeError: Cannot read property of null
2020-02-29 14:04:38,142 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:39: TypeError: Cannot read property of null
2020-02-29 14:04:38,145 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:24: TypeError: Cannot read property of null
2020-02-29 14:04:38,147 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:30: TypeError: Cannot read property of null
2020-02-29 14:04:38,149 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:39: TypeError: Cannot read property of null
2020-02-29 14:04:38,152 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:24: TypeError: Cannot read property of null
2020-02-29 14:04:38,154 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:30: TypeError: Cannot read property of null
2020-02-29 14:04:38,156 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:39: TypeError: Cannot read property of null
2020-02-29 14:04:38,159 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupTooltip.qml:67: TypeError: Cannot read property of null
2020-02-29 14:04:38,164 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupTooltip.qml:69: TypeError: Cannot read property of null
2020-02-29 14:04:38,167 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupTooltip.qml:71: TypeError: Cannot read property of null
2020-02-29 14:04:38,170 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:150: TypeError: Cannot read property of null
2020-02-29 14:04:38,172 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-02-29 14:04:38,175 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:166: TypeError: Cannot read property of null
2020-02-29 14:04:38,177 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:167: TypeError: Cannot read property of null
2020-02-29 14:04:38,179 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:178: TypeError: Cannot read property of null
2020-02-29 14:04:38,181 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:231: TypeError: Cannot read property of null
2020-02-29 14:04:38,184 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:241: TypeError: Cannot read property of null
2020-02-29 14:04:48,297 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-02-29 14:04:54,956 - INFO - [MainThread] UM.Controller.deleteAllNodesWithMeshData [386]: Clearing scene
2020-02-29 14:04:54,966 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 14:04:54,969 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 14:04:54,979 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: GroupedOp.(#=1) <UM.Operations.RemoveSceneNodeOperation.RemoveSceneNodeOperation object at 0x6000147e1e58>, took 4ms
2020-02-29 14:04:54,983 - INFO - [MainThread] cura.CuraApplication._removeNodesWithLayerData [1900]: Clearing scene
2020-02-29 14:04:55,774 - WARNING - [MainThread] cura.UI.PrintInformation.setBaseName [360]: Unsupported Mime Type Database file extension 
2020-02-29 14:04:56,500 - INFO - [Thread-8] STLReader.STLReader.load_file [51]: Using NumPy-STL to load STL data.
2020-02-29 14:04:56,860 - DEBUG - [Thread-8] UM.Mesh.MeshData.calculateNormalsFromVertices [495]: Calculating normals took 0.0007951259613037109 seconds
2020-02-29 14:04:56,861 - DEBUG - [Thread-8] STLReader.STLReader._read [102]: Loaded a mesh with 37932 vertices
2020-02-29 14:04:56,881 - DEBUG - [Thread-8] UM.Mesh.MeshData.approximateConvexHull [452]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.013943910598754883 seconds. 54 input vertices. 54 output vertices.
2020-02-29 14:04:56,893 - DEBUG - [Thread-8] UM.FileHandler.ReadFileJob.run [71]: Loading file took 0.4 seconds
2020-02-29 14:04:56,910 - DEBUG - [Thread-8] UM.Mesh.MeshData.approximateConvexHull [452]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.013528108596801758 seconds. 54 input vertices. 54 output vertices.
2020-02-29 14:04:56,938 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: <UM.Operations.AddSceneNodeOperation.AddSceneNodeOperation object at 0x6000147bf0d8>, took 3ms
2020-02-29 14:05:06,356 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [135]: New error check scheduled.
2020-02-29 14:05:06,776 - INFO - [MainThread] cura.Machines.MachineErrorChecker._setResult [187]: Error check finished, result = False, time = 0.4s
2020-02-29 14:05:07,294 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-02-29 14:05:10,147 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [225]: Starting to slice...
2020-02-29 14:05:10,148 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [243]: Going to slice build plate [0]!
2020-02-29 14:05:10,156 - DEBUG - [MainThread] UM.Backend.Backend._createSocket [213]: Previous socket existed. Closing that first.
2020-02-29 14:05:10,180 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [173]: Socket state changed to Listening
2020-02-29 14:05:10,386 - INFO - [MainThread] UM.Backend.Backend.startEngine [81]: Started engine process: /Applications/Ultimaker Cura 3.app/Contents/MacOS/CuraEngine
2020-02-29 14:05:10,409 - DEBUG - [MainThread] UM.Backend.Backend._backendLog [101]: [Backend] Calling engine with: ['/Applications/Ultimaker Cura 3.app/Contents/MacOS/CuraEngine', 'connect', '127.0.0.1:49674', '']
2020-02-29 14:05:10,413 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-02-29 14:05:10,415 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] Cura_SteamEngine version 4.5.0
2020-02-29 14:05:10,418 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [177]: Socket state changed to Connected
2020-02-29 14:05:10,420 - DEBUG - [MainThread] UM.Backend.Backend._onSocketStateChanged [167]: Backend connected on port 49674
2020-02-29 14:05:10,422 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] Copyright (C) 2019 Ultimaker
2020-02-29 14:05:10,425 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-02-29 14:05:10,427 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] This program is free software: you can redistribute it and/or modify
2020-02-29 14:05:10,429 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] it under the terms of the GNU Affero General Public License as published by
2020-02-29 14:05:10,432 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] the Free Software Foundation, either version 3 of the License, or
2020-02-29 14:05:10,435 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] (at your option) any later version.
2020-02-29 14:05:10,438 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-02-29 14:05:10,440 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] This program is distributed in the hope that it will be useful,
2020-02-29 14:05:10,444 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] but WITHOUT ANY WARRANTY; without even the implied warranty of
2020-02-29 14:05:10,448 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
2020-02-29 14:05:10,451 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] GNU Affero General Public License for more details.
2020-02-29 14:05:10,455 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-02-29 14:05:10,457 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] You should have received a copy of the GNU Affero General Public License
2020-02-29 14:05:10,460 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] along with this program.  If not, see <http://www.gnu.org/licenses/>.
2020-02-29 14:05:10,558 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onStartSliceCompleted [429]: Sending slice message took 0.41019606590270996 seconds
2020-02-29 14:05:10,595 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING]  -s extruders_enabled_count="1" -s support_interface_density="100" -s cool_fan_speed="100.0" -s raft_base_thickness="0.36" -s bridge_skin_material_flow="60" -s slicing_tolerance="middle" -s material_end_of_filament_purge_speed="0.5" -s prime_tower_size="20" -s retraction_retract_speed="25" -s speed_layer_0="30.0" -s infill="0" -s small_feature_speed_factor="50" -s speed_prime_tower="60" -s support_brim_enable="False" -s infill_multiplier="1" -s gradual_support_infill_steps="0" -s initial_extruder_nr="0" -s infill_extruder_nr="-1" -s infill_sparse_density="20" -s bottom_skin_expand_distance="0.8" -s machine_nozzle_cool_down_speed="2.0" -s infill_offset_x="0" -s machine_depth="190" -s adhesion_z_offset_extensive_processing="False" -s limit_support_retractions="True" -s machine_max_acceleration_y="9000" -s infill_offset_y="0" -s acceleration_print_layer_0="3000" -s wall_min_flow_retract="False" -s speed_support_roof="20.0" -s xy_offset_layer_0="0" -s adhesion_type="skirt" -s z_seam_position="back" -s material_guid="" -s magic_spiralize="False" -s material_linear_advance_factor_support_interface="0" -s machine_max_acceleration_x="9000" -s material_linear_advance_factor_infill="0" -s print_temperature="210" -s skin_angles="[ ]" -s gradual_support_infill_step_height="1" -s support_conical_angle="30" -s raft_surface_acceleration="3000" -s jerk_layer_0="20" -s machine_max_feedrate_x="299792458000" -s support_pattern="lines" -s jerk_infill="20" -s speed_equalize_flow_enabled="False" -s top_thickness="0.8" -s bottom_skin_preshrink="0.8" -s raft_surface_line_spacing="0.4" -s wall_line_width="0.4" -s xy_offset="0" -s alternate_carve_order="True" -s travel_avoid_other_parts="True" -s raft_interface_speed="22.5" -s travel_avoid_distance="0.625" -s support_interface_height="1" -s jerk_travel_layer_0="30.0" -s date="29-02-2020" -s wireframe_flow="100" -s machine_acceleration="4000" -s machine_minimum_feedrate="0.0" -s skin_preshrink="0.8" -s jerk_wall="20" -s retract_at_layer_change="False" -s jerk_travel="30" -s support_skip_some_zags="False" -s minimum_roof_area="1.0" -s wireframe_flow_connection="100" -s bridge_skin_density="100" -s skirt_brim_line_width="0.4" -s top_bottom_pattern="lines" -s travel_compensate_overlapping_walls_0_enabled="True" -s flow_rate_max_extrusion_offset="0" -s material_diameter="2.85" -s support_bottom_line_width="0.4" -s raft_smoothing="5" -s speed_topbottom="30.0" -s wireframe_drag_along="0.6" -s material_break_speed="25" -s raft_interface_acceleration="3000" -s minimum_polygon_circumference="1.0" -s support_interface_skip_height="0.3" -s speed_print="60" -s skin_edge_support_layers="0" -s support_type="buildplate" -s support_roof_line_width="0.4" -s wireframe_printspeed_bottom="5" -s raft_surface_line_width="0.4" -s prime_tower_min_volume="6" -s prime_blob_enable="False" -s switch_extruder_prime_speed="20" -s wall_x_extruder_nr="-1" -s machine_steps_per_mm_z="50" -s smooth_spiralized_contours="True" -s ooze_shield_dist="2" -s bridge_wall_material_flow="50" -s cool_fan_full_layer="2" -s roofing_material_flow="100" -s wipe_hop_speed="10" -s infill_angles="[ ]" -s infill_line_distance="4.0" -s minimum_bottom_area="1.0" -s minimum_support_area="0.0" -s material_linear_advance_factor_wall_0="0" -s wall_0_wipe_dist="0.2" -s switch_extruder_extra_prime_amount="0" -s material_extrusion_cool_down_speed="0.7" -s wall_x_material_flow="100" -s support_xy_distance_overhang="0.2" -s wireframe_printspeed_up="5" -s resolution="0" -s retraction_hop="1" -s jerk_wall_0="20" -s skin_material_flow="100" -s support_bottom_density="100" -s jerk_support_interface="20" -s material_print_temperature_layer_0="210" -s retraction_min_travel="0.8" -s support_xy_overrides_z="z_overrides_xy" -s min_infill_area="0" -s machine_nozzle_tip_outer_diameter="1" -s machine_steps_per_mm_x="50" -s material_break_preparation_temperature="210" -s machine_nozzle_size="0.4" -s support_initial_layer_line_distance="0" -s center_object="False" -s spaghetti_inset="0.2" -s mold_enabled="False" -s acceleration_travel="5000" -s acceleration_wall="3000" -s support_bottom_material_flow="100" -s ironing_enabled="False" -s cooling="0" -s support_infill_angles="[ ]" -s shell="0" -s bridge_skin_material_flow_2="100" -s speed_support_interface="40.0" -s meshfix="0" -s acceleration_skirt_brim="3000" -s support_line_distance="0" -s retraction_enable="True" -s retraction_hop_enabled="False" -s switch_extruder_retraction_speed="20" -s acceleration_roofing="3000" -s anti_overhang_mesh="False" -s cool_min_layer_time_fan_speed_max="10" -s wipe_retraction_speed="25" -s retraction_amount="6.5" -s retraction_combing="all" -s material_flow_layer_0="100" -s wall_material_flow="100" -s extruder_prime_pos_z="0" -s support_tower_roof_angle="65" -s connect_skin_polygons="False" -s infill_pattern="grid" -s magic_fuzzy_skin_thickness="0.3" -s meshfix_extensive_stitching="False" -s infill_wipe_dist="0.1" -s skirt_brim_material_flow="100" -s bridge_skin_speed="15.0" -s mesh_position_x="0" -s prime_tower_position_y="165.6" -s jerk_wall_x="20" -s support_bottom_extruder_nr="0" -s support_roof_height="1.2" -s cutting_mesh="False" -s machine_max_jerk_xy="20.0" -s support_material_flow="100" -s bridge_fan_speed="100" -s support_line_width="0.4" -s ooze_shield_enabled="False" -s support_extruder_nr="0" -s wall_thickness="0.8" -s support_bottom_distance="0" -s material_crystallinity="False" -s machine_steps_per_mm_e="1600" -s dual="0" -s support_bottom_enable="False" -s wireframe_nozzle_clearance="1" -s speed_infill="60" -s machine_nozzle_id="unknown" -s wipe_brush_pos_x="100" -s acceleration_travel_layer_0="5000.0" -s meshfix_maximum_deviation="0.05" -s cool_fan_enabled="True" -s wall_overhang_angle="90" -s cool_fan_speed_max="100.0" -s raft_surface_layers="2" -s skirt_brim_minimal_length="250" -s material_linear_advance_factor="0" -s cool_min_layer_time="5" -s day="Sat" -s wipe_retraction_enable="True" -s travel_avoid_supports="False" -s acceleration_infill="3000" -s material_bed_temperature="66" -s bridge_skin_material_flow_3="110" -s bridge_fan_speed_2="0" -s initial_bottom_layers="8" -s support_interface_pattern="concentric" -s cross_infill_density_image="" -s adaptive_layer_height_variation="0.1" -s infill_wall_line_count="0" -s support_supported_skin_fan_speed="100" -s extruder_prime_pos_y="0" -s machine_name="Wanhao Duplicator i3 Plus" -s retraction_prime_speed="25" -s material_linear_advance_factor_prime_tower="0" -s z_seam_type="sharpest_corner" -s meshfix_keep_open_polygons="False" -s support_use_towers="True" -s infill_support_enabled="False" -s cool_fan_speed_0="0" -s support_brim_line_count="20" -s blackmagic="0" -s material_print_temp_wait="True" -s support_roof_angles="[ ]" -s infill_mesh_order="0" -s support="0" -s spaghetti_infill_enabled="False" -s acceleration_support="3000" -s support_interface_offset="0.0" -s support_tree_enable="True" -s acceleration_wall_0="3000" -s wireframe_top_jump="0.6" -s jerk_support_bottom="20" -s speed_support_bottom="20.0" -s support_conical_min_width="5.0" -s bottom_layers="8" -s material_flow_dependent_temperature="False" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s support_wall_count="1" -s machine_max_acceleration_z="100" -s skin_edge_support_thickness="0" -s coasting_min_volume="0.8" -s material_linear_advance_factor_wall="0" -s cool_fan_full_at_height="0.3" -s draft_shield_dist="10" -s layer_height="0.1" -s material_break_preparation_retracted_position="-16" -s infill_mesh="False" -s mold_angle="40" -s raft_speed="30.0" -s machine_max_jerk_z="0.4" -s support_tree_angle="40" -s wall_line_width_0="0.4" -s cross_infill_pocket_size="4.0" -s machine_max_jerk_e="5.0" -s raft_margin="15" -s raft_surface_speed="30.0" -s infill_enable_travel_optimization="False" -s machine_height="180" -s travel_retract_before_outer_wall="False" -s infill_support_angle="40" -s adaptive_layer_height_variation_step="0.01" -s raft_surface_jerk="20" -s bridge_sparse_infill_max_density="0" -s wireframe_printspeed_flat="5" -s draft_shield_height_limitation="full" -s magic_fuzzy_skin_enabled="False" -s jerk_enabled="False" -s support_mesh_drop_down="True" -s wireframe_roof_fall_down="2" -s wireframe_strategy="compensate" -s machine_gcode_flavor="RepRap (Marlin/Sprinter)" -s conical_overhang_angle="50" -s infill_overlap_mm="0.04" -s mesh_position_z="0" -s travel_speed="120" -s speed="0" -s small_hole_max_size="0" -s material_bed_temp_prepend="True" -s material="0" -s infill_before_walls="True" -s meshfix_maximum_resolution="0.5" -s wipe_repeat_count="5" -s support_tree_branch_distance="1" -s retraction_speed="25" -s gradual_infill_steps="0" -s machine_show_variants="False" -s support_interface_material_flow="100" -s infill_overlap="10" -s jerk_support="20" -s wall_line_width_x="0.4" -s roofing_extruder_nr="-1" -s raft_base_acceleration="3000" -s wall_extruder_nr="-1" -s adaptive_layer_height_threshold="0.2" -s min_skin_width_for_expansion="4.898587196589413e-17" -s material_no_load_move_factor="0.940860215" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s max_skin_angle_for_expansion="90" -s sub_div_rad_add="0.4" -s support_tree_branch_diameter_angle="5" -s top_bottom_pattern_0="lines" -s alternate_extra_perimeter="False" -s support_roof_enable="True" -s bridge_wall_coast="100" -s raft_interface_fan_speed="0" -s support_offset="0" -s wireframe_fall_down="0.5" -s material_flow="100" -s cross_support_density_image="" -s wireframe_height="3" -s z_seam_relative="False" -s support_tower_maximum_supported_diameter="3.0" -s support_interface_extruder_nr="0" -s nozzle_disallowed_areas="[]" -s support_xy_distance="0.7" -s speed_wall="30.0" -s bridge_enable_more_layers="True" -s conical_overhang_enabled="False" -s speed_travel_layer_0="60.0" -s draft_shield_height="10" -s z_seam_x="100.0" -s retraction_combing_max_distance="0" -s support_infill_rate="0" -s spaghetti_max_infill_angle="10" -s acceleration_support_interface="3000" -s machine_feeder_wheel_diameter="10.0" -s retraction_hop_only_when_collides="False" -s extruder_prime_pos_x="0" -s build_volume_temperature="28" -s layer_start_y="0.0" -s material_break_retracted_position="-50" -s material_initial_print_temperature="200" -s support_infill_extruder_nr="0" -s coasting_speed="90" -s carve_multiple_volumes="False" -s flow_rate_extrusion_offset_factor="100" -s acceleration_wall_x="3000" -s skin_overlap_mm="0.02" -s small_feature_max_length="0.0" -s wall_0_extruder_nr="-1" -s material_maximum_park_duration="300" -s machine_nozzle_temp_enabled="True" -s switch_extruder_retraction_amount="16" -s skirt_brim_speed="30.0" -s wipe_retraction_extra_prime_amount="0" -s ironing_only_highest_layer="False" -s acceleration_topbottom="3000" -s machine_settings="0" -s adhesion_extruder_nr="0" -s mold_width="5" -s jerk_support_infill="20" -s wall_overhang_speed_factor="100" -s jerk_prime_tower="20" -s skin_outline_count="1" -s bridge_skin_speed_2="15.0" -s machine_max_feedrate_y="299792458000" -s support_roof_material_flow="100" -s bridge_skin_density_2="75" -s support_tower_diameter="3.0" -s material_linear_advance_factor_support="0" -s command_line_settings="0" -s brim_replaces_support="True" -s prime_tower_wipe_enabled="True" -s fill_perimeter_gaps="everywhere" -s skin_overlap="5" -s print_sequence="all_at_once" -s acceleration_support_infill="3000" -s brim_gap="0" -s spaghetti_infill_extra_volume="0" -s support_connect_zigzags="True" -s adaptive_layer_height_enabled="False" -s travel_compensate_overlapping_walls_enabled="True" -s roofing_pattern="lines" -s fill_outline_gaps="False" -s support_zag_skip_count="0" -s machine_filament_park_distance="16" -s acceleration_print="3000" -s material_linear_advance_factor_wall_x="0" -s material_final_print_temperature="195" -s ooze_shield_angle="60" -s machine_endstop_positive_direction_x="False" -s travel_compensate_overlapping_walls_x_enabled="True" -s coasting_volume="0.064" -s machine_endstop_positive_direction_z="True" -s small_feature_speed_factor_0="50" -s machine_shape="rectangular" -s machine_heated_bed="True" -s machine_use_extruder_offset_to_offset_coords="True" -s brim_outside_only="True" -s material_standby_temperature="150" -s support_bottom_stair_step_height="0.3" -s speed_roofing="30.0" -s roofing_line_width="0.4" -s material_print_temp_prepend="True" -s wireframe_printspeed_down="5" -s minimum_interface_area="1.0" -s draft_shield_enabled="False" -s speed_support="60" -s adhesion_z_offset="0" -s wireframe_roof_outer_delay="0.2" -s ironing_inset="0.2" -s bridge_fan_speed_3="0" -s initial_layer_line_width_factor="100.0" -s machine_start_gcode="" -s experimental="0" -s bridge_wall_min_length="5" -s prime_tower_position_x="195.6" -s wipe_retraction_amount="6.5" -s material_break_temperature="50" -s top_bottom_extruder_nr="-1" -s acceleration_support_roof="3000" -s support_roof_offset="0.0" -s wall_0_material_flow="100" -s wireframe_flow_flat="100" -s speed_print_layer_0="30.0" -s default_material_bed_temperature="60" -s raft_jerk="20" -s machine_end_gcode="" -s machine_center_is_zero="False" -s support_conical_enabled="False" -s material_anti_ooze_retraction_speed="5" -s machine_head_with_fans_polygon="[[-20, 10], [10, 10], [10, -10], [-20, -10]]" -s z_seam_corner="z_seam_corner_inner" -s support_interface_angles="[ ]" -s bottom_thickness="0.8" -s raft_interface_line_spacing="1.0" -s material_flush_purge_length="60" -s machine_nozzle_heat_up_speed="2.0" -s cool_fan_speed_min="100.0" -s wipe_move_distance="20" -s bridge_skin_speed_3="15.0" -s magic_fuzzy_skin_point_dist="0.8" -s filter_out_tiny_gaps="True" -s spaghetti_flow="20" -s machine_heated_build_volume="False" -s extruder_prime_pos_abs="False" -s material_adhesion_tendency="10" -s infill_sparse_thickness="0.1" -s speed_wall_0="30.0" -s machine_extruders_share_heater="False" -s cool_lift_head="False" -s zig_zaggify_infill="False" -s acceleration_enabled="False" -s support_roof_extruder_nr="0" -s layer_start_x="0.0" -s machine_min_cool_heat_time_window="50.0" -s multiple_mesh_overlap="0.15" -s wipe_retraction_retract_speed="25" -s support_bottom_pattern="concentric" -s material_break_preparation_speed="2" -s acceleration_support_bottom="3000" -s material_end_of_filament_purge_length="20" -s wireframe_roof_drag_along="0.8" -s support_bottom_line_distance="0.4" -s wall_min_flow="0" -s ironing_flow="10.0" -s acceleration_prime_tower="3000" -s retraction_hop_after_extruder_switch_height="1" -s skirt_gap="3" -s speed_ironing="20.0" -s machine_max_acceleration_e="10000" -s line_width="0.4" -s zig_zaggify_support="False" -s wipe_hop_enable="False" -s optimize_wall_printing_order="False" -s raft_interface_line_width="0.8" -s gantry_height="180" -s material_surface_energy="100" -s print_bed_temperature="66" -s magic_mesh_surface_mode="normal" -s raft_fan_speed="0" -s wireframe_up_half_speed="0.3" -s machine_max_feedrate_e="299792458000" -s spaghetti_infill_stepped="True" -s raft_surface_fan_speed="0" -s meshfix_union_all_remove_holes="False" -s speed_wall_x="60.0" -s raft_base_jerk="20" -s machine_extruder_count="1" -s jerk_support_roof="20" -s wireframe_top_delay="0" -s machine_endstop_positive_direction_y="False" -s jerk_topbottom="20" -s remove_empty_first_layers="True" -s support_bottom_height="1" -s raft_acceleration="3000" -s jerk_print_layer_0="20" -s wireframe_roof_inset="3" -s material_anti_ooze_retracted_position="-4" -s expand_skins_expand_distance="0.8" -s bridge_wall_speed="15.0" -s support_bottom_offset="0.0" -s wireframe_flat_delay="0.1" -s machine_nozzle_expansion_angle="45" -s brim_line_count="8" -s support_roof_line_distance="0.4" -s prime_tower_line_width="0.4" -s infill_line_width="0.4" -s magic_fuzzy_skin_outside_only="False" -s speed_equalize_flow_max="150" -s jerk_roofing="20" -s raft_base_line_width="0.8" -s coasting_enable="False" -s support_interface_line_width="0.4" -s support_bottom_angles="[ ]" -s support_skip_zag_per_mm="20" -s support_extruder_nr_layer_0="0" -s meshfix_maximum_travel_resolution="0.8" -s cool_min_speed="10" -s machine_disallowed_areas="[]" -s support_interface_enable="False" -s bridge_skin_density_3="80" -s machine_max_feedrate_z="299792458000" -s support_roof_density="100" -s spaghetti_max_height="2.0" -s skirt_line_count="4" -s retraction_count_max="90" -s retraction_extrusion_window="6.5" -s support_fan_enable="False" -s support_roof_pattern="concentric" -s support_mesh="False" -s wireframe_straight_before_down="20" -s material_print_temperature="210" -s retraction_extra_prime_amount="0" -s wireframe_printspeed="5" -s machine_steps_per_mm_y="50" -s support_tree_branch_diameter="2" -s speed_slowdown_layers="2" -s default_material_print_temperature="210" -s roofing_layer_count="0" -s relative_extrusion="False" -s wall_0_inset="0" -s brim_width="8.0" -s speed_support_infill="60" -s raft_base_line_spacing="1.6" -s max_extrusion_before_wipe="10" -s ironing_pattern="zigzag" -s speed_travel="120" -s support_angle="70" -s raft_base_speed="22.5" -s layer_0_z_overlap="0.15" -s speed_z_hop="10" -s platform_adhesion="0" -s support_bottom_stair_step_width="5.0" -s raft_interface_jerk="20" -s material_shrinkage_percentage="0" -s ironing_line_spacing="0.1" -s skin_line_width="0.4" -s connect_infill_polygons="False" -s wireframe_bottom_delay="0" -s mesh_position_y="0" -s infill_randomize_start_location="False" -s machine_nozzle_head_distance="3" -s support_brim_width="8.0" -s top_layers="8" -s support_infill_sparse_thickness="0.1" -s material_bed_temperature_layer_0="66" -s clean_between_layers="False" -s travel="0" -s material_bed_temp_wait="True" -s raft_airgap="0.3" -s material_flush_purge_speed="0.5" -s support_enable="False" -s prime_tower_enable="False" -s raft_surface_thickness="0.1" -s jerk_skirt_brim="20" -s machine_heat_zone_length="16" -s gradual_infill_step_height="1.5" -s outer_inset_first="False" -s prime_tower_brim_enable="False" -s top_skin_preshrink="0.8" -s top_skin_expand_distance="0.8" -s jerk_print="20" -s mold_roof_height="0.5" -s jerk_ironing="20" -s roofing_angles="[ ]" -s support_top_distance="0.1" -s retraction_hop_after_extruder_switch="True" -s material_linear_advance_factor_skirt_brim="0" -s layer_height_0="0.3" -s switch_extruder_retraction_speeds="20" -s machine_firmware_retract="False" -s meshfix_union_all="True" -s support_z_distance="0.1" -s bridge_settings_enabled="False" -s z_seam_y="190" -s acceleration_layer_0="3000" -s raft_interface_thickness="0.15000000000000002" -s wall_line_count="2" -s magic_fuzzy_skin_point_density="1.25" -s top_bottom_thickness="0.8" -s machine_width="200" -s prime_tower_flow="100" -s acceleration_ironing="3000" -s raft_base_fan_speed="0" -s support_tree_collision_resolution="0.2" -s skin_no_small_gaps_heuristic="False" -s wipe_hop_amount="1" -s support_join_distance="2.0" -s machine_buildplate_type="glass" -s time="14:05:10" -s infill_material_flow="100" -s wireframe_enabled="False" -s material_linear_advance_factor_topbottom="0" -s wipe_retraction_prime_speed="25" -s wipe_pause="0" -s bridge_skin_support_threshold="50" -e0 -s switch_extruder_retraction_speeds="20" -s support_interface_density="100" -s cool_fan_speed="80" -s raft_base_thickness="0.36" -s machine_nozzle_offset_x="0" -s initial_layer_line_width_factor="100.0" -s bridge_skin_material_flow="60" -s material_end_of_filament_purge_speed="0.5" -s retraction_retract_speed="40" -s speed_layer_0="12" -s infill="0" -s small_feature_speed_factor="50" -s support_infill_sparse_thickness="0.1" -s speed_prime_tower="30" -s support_brim_enable="False" -s infill_multiplier="1" -s gradual_support_infill_steps="0" -s infill_sparse_density="32" -s bottom_skin_expand_distance="2.4" -s machine_nozzle_cool_down_speed="2.0" -s infill_offset_x="0" -s limit_support_retractions="True" -s machine_extruder_end_pos_x="0" -s infill_offset_y="0" -s acceleration_print_layer_0="3000" -s wall_min_flow_retract="False" -s speed_support_roof="20.0" -s xy_offset_layer_0="0" -s z_seam_position="back" -s material_guid="0ff92885-617b-4144-a03c-9989872454bc" -s material_linear_advance_factor_support_interface="0" -s material_linear_advance_factor_infill="0" -s material_break_preparation_speed="2" -s acceleration_support_bottom="3000" -s material_end_of_filament_purge_length="20" -s gradual_support_infill_step_height="1" -s support_conical_angle="30" -s raft_surface_acceleration="3000" -s support_roof_pattern="concentric" -s jerk_layer_0="20" -s support_pattern="lines" -s jerk_infill="20" -s speed_equalize_flow_enabled="False" -s top_thickness="0.8" -s bottom_skin_preshrink="2.4" -s raft_surface_line_spacing="0.4" -s skin_edge_support_layers="0" -s wall_line_width="0.4" -s xy_offset="0" -s travel_avoid_other_parts="True" -s raft_interface_speed="11.25" -s travel_avoid_distance="0.625" -s support_interface_height="1" -s wipe_move_distance="20" -s cool_fan_speed_min="80" -s acceleration_skirt_brim="3000" -s meshfix="0" -s support_bottom_material_flow="100" -s acceleration_wall="3000" -s ironing_enabled="False" -s acceleration_travel="5000" -s support_supported_skin_fan_speed="100" -s infill_wall_line_count="0" -s support_wall_count="1" -s skin_edge_support_thickness="0" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s experimental="0" -s support_skip_some_zags="False" -s travel_compensate_overlapping_walls_0_enabled="True" -s support_bottom_line_width="0.4" -s material_flow="100" -s support_offset="0" -s raft_smoothing="5" -s speed_topbottom="15.0" -s wipe_hop_enable="False" -s zig_zaggify_support="False" -s speed_print="30" -s prime_tower_min_volume="6" -s jerk_travel="30" -s material_linear_advance_factor_skirt_brim="0" -s support_tree_branch_diameter="2" -s machine_steps_per_mm_y="50" -s acceleration_support_interface="3000" -s spaghetti_max_infill_angle="10" -s bridge_wall_material_flow="50" -s wipe_hop_speed="10" -s jerk_wall_0="20" -s retraction_hop="1" -s wipe_pause="0" -s wipe_retraction_prime_speed="40" -s minimum_support_area="0.0" -s material_linear_advance_factor_wall_0="0" -s wall_0_wipe_dist="0.2" -s switch_extruder_extra_prime_amount="0" -s support_tower_maximum_supported_diameter="3.0" -s spaghetti_infill_extra_volume="0" -s support_connect_zigzags="True" -s support_xy_distance_overhang="0.2" -s bridge_skin_density_3="80" -s support_interface_enable="False" -s resolution="0" -s support_line_width="0.4" -s material_break_preparation_retracted_position="-16" -s support_xy_overrides_z="z_overrides_xy" -s min_infill_area="0" -s machine_nozzle_tip_outer_diameter="1" -s machine_steps_per_mm_x="50" -s infill_angles="[ ]" -s minimum_interface_area="1.0" -s skirt_brim_line_width="0.4" -s top_bottom_pattern="lines" -s cool_fan_full_layer="2" -s center_object="False" -s spaghetti_inset="0.2" -s gradual_infill_steps="0" -s jerk_travel_layer_0="30.0" -s mold_enabled="False" -s raft_surface_line_width="0.4" -s cooling="0" -s support_tree_collision_resolution="0.2" -s raft_base_fan_speed="0" -s material_print_temperature_layer_0="220" -s raft_interface_line_spacing="1.0" -s machine_nozzle_heat_up_speed="2.0" -s material_flush_purge_length="60" -s bridge_skin_material_flow_2="100" -s speed_support_interface="20.0" -s support_interface_offset="0.0" -s jerk_support="20" -s wall_line_width_x="0.4" -s support_line_distance="0" -s retraction_enable="True" -s switch_extruder_retraction_speed="20" -s retraction_hop_enabled="False" -s acceleration_roofing="3000" -s cool_min_layer_time_fan_speed_max="10" -s wipe_retraction_speed="40" -s retraction_amount="2.5" -s raft_speed="15.0" -s mold_angle="40" -s material_flow_layer_0="100" -s wall_material_flow="100" -s bridge_skin_material_flow_3="110" -s bridge_fan_speed_2="0" -s initial_bottom_layers="6" -s support_interface_pattern="concentric" -s connect_skin_polygons="False" -s infill_pattern="gyroid" -s material_flow_dependent_temperature="False" -s bottom_layers="6" -s magic_fuzzy_skin_thickness="0.3" -s meshfix_extensive_stitching="False" -s infill_wipe_dist="0.1" -s machine_extruder_start_pos_abs="False" -s skirt_brim_material_flow="100" -s bridge_skin_speed="10" -s jerk_wall_x="20" -s wipe_retraction_amount="2.5" -s material_break_temperature="50" -s support_roof_height="1.2" -s magic_fuzzy_skin_enabled="False" -s connect_infill_polygons="False" -s machine_extruder_start_code="" -s support_material_flow="100" -s bridge_fan_speed="100" -s bridge_sparse_infill_max_density="0" -s wall_thickness="0.8" -s support_bottom_distance="0" -s material_crystallinity="False" -s machine_steps_per_mm_e="1600" -s jerk_wall="20" -s dual="0" -s support_bottom_enable="False" -s skin_overlap="5" -s speed_infill="30" -s machine_nozzle_id="unknown" -s wipe_brush_pos_x="100" -s acceleration_travel_layer_0="5000.0" -s raft_surface_layers="2" -s skirt_brim_minimal_length="250" -s material_linear_advance_factor="0" -s cool_min_layer_time="5" -s wipe_retraction_enable="True" -s travel_avoid_supports="False" -s acceleration_infill="3000" -s speed_ironing="10.0" -s support_roof_line_width="0.4" -s extruder_prime_pos_y="0" -s material_linear_advance_factor_prime_tower="0" -s retraction_prime_speed="40" -s z_seam_type="sharpest_corner" -s prime_blob_enable="False" -s meshfix_keep_open_polygons="False" -s raft_surface_speed="15.0" -s infill_enable_travel_optimization="False" -s machine_nozzle_temp_enabled="True" -s switch_extruder_retraction_amount="16" -s skirt_brim_speed="12" -s material_maximum_park_duration="300" -s infill_material_flow="100" -s support_use_towers="True" -s infill_support_enabled="False" -s cool_fan_speed_0="0" -s support_brim_line_count="20" -s blackmagic="0" -s multiple_mesh_overlap="0.15" -s wipe_retraction_retract_speed="40" -s material_linear_advance_factor_wall_x="0" -s acceleration_print="3000" -s support_bottom_pattern="concentric" -s meshfix_maximum_deviation="0.05" -s cool_fan_enabled="True" -s wall_overhang_angle="90" -s cool_fan_speed_max="80" -s machine_extruder_end_code="" -s support_roof_angles="[ ]" -s retraction_hop_after_extruder_switch_height="1" -s machine_extruder_end_pos_abs="False" -s support="0" -s spaghetti_infill_enabled="False" -s acceleration_support="3000" -s acceleration_wall_0="3000" -s jerk_support_bottom="20" -s material_extrusion_cool_down_speed="0.7" -s speed_support_bottom="20.0" -s support_conical_min_width="5.0" -s coasting_min_volume="0.8" -s material_linear_advance_factor_wall="0" -s cool_fan_full_at_height="0.3" -s support_infill_angles="[ ]" -s shell="0" -s support_tower_diameter="3.0" -s machine_extruder_start_pos_x="0" -s wipe_hop_amount="1" -s support_join_distance="2.0" -s support_tree_angle="40" -s fill_perimeter_gaps="everywhere" -s prime_tower_wipe_enabled="True" -s machine_heat_zone_length="16" -s jerk_skirt_brim="20" -s raft_jerk="20" -s speed_print_layer_0="12" -s command_line_settings="0" -s material_linear_advance_factor_support="0" -s conical_overhang_angle="50" -s infill_overlap_mm="0.05600000000000001" -s mesh_position_z="0" -s speed="0" -s material_diameter="1.75" -s meshfix_union_all_remove_holes="False" -s gradual_infill_step_height="1.5" -s cool_lift_head="False" -s speed_wall_0="15.0" -s outer_inset_first="False" -s extruder_prime_pos_z="0" -s support_tower_roof_angle="65" -s meshfix_maximum_resolution="0.5" -s wipe_repeat_count="5" -s support_tree_branch_distance="1" -s wall_x_material_flow="100" -s min_skin_width_for_expansion="3.67394039744206e-17" -s material_no_load_move_factor="0.940860215" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s max_skin_angle_for_expansion="90" -s top_bottom_pattern_0="lines" -s alternate_extra_perimeter="False" -s support_roof_enable="True" -s slicing_tolerance="exclusive" -s machine_extruder_end_pos_y="0" -s cross_support_density_image="" -s z_seam_relative="False" -s support_xy_distance="0.7" -s speed_wall="15.0" -s material_final_print_temperature="205" -s machine_endstop_positive_direction_x="False" -s bridge_enable_more_layers="True" -s conical_overhang_enabled="False" -s speed_travel_layer_0="60.0" -s fill_outline_gaps="False" -s machine_filament_park_distance="16" -s support_zag_skip_count="0" -s material_break_retracted_position="-50" -s material_initial_print_temperature="210" -s switch_extruder_prime_speed="20" -s extruder_prime_pos_x="0" -s layer_start_y="0.0" -s filter_out_tiny_gaps="True" -s bridge_skin_speed_3="10" -s spaghetti_flow="20" -s magic_fuzzy_skin_point_dist="0.8" -s coasting_speed="90" -s skin_material_flow="100" -s support_bottom_density="100" -s acceleration_wall_x="3000" -s skin_overlap_mm="0.02" -s small_feature_max_length="0.0" -s support_initial_layer_line_distance="0" -s support_bottom_offset="0.0" -s bridge_wall_speed="10" -s meshfix_union_all="True" -s support_z_distance="0.1" -s infill_line_distance="1.25" -s minimum_bottom_area="1.0" -s retraction_combing_max_distance="0" -s z_seam_x="100.0" -s expand_skins_expand_distance="2.4" -s mesh_position_x="0" -s wipe_retraction_extra_prime_amount="0" -s jerk_support_roof="20" -s machine_endstop_positive_direction_y="False" -s coasting_volume="0.064" -s machine_endstop_positive_direction_z="True" -s small_feature_speed_factor_0="50" -s infill_support_angle="40" -s raft_surface_jerk="20" -s support_interface_skip_height="0.3" -s mold_width="5" -s infill_before_walls="True" -s material="0" -s jerk_support_infill="20" -s wall_overhang_speed_factor="100" -s jerk_prime_tower="20" -s skin_outline_count="1" -s material_anti_ooze_retraction_speed="5" -s support_conical_enabled="False" -s bridge_skin_speed_2="10" -s retract_at_layer_change="False" -s raft_base_jerk="20" -s speed_wall_x="30.0" -s support_roof_material_flow="100" -s bridge_skin_density_2="75" -s brim_replaces_support="True" -s acceleration_support_infill="3000" -s brim_gap="0" -s travel_compensate_overlapping_walls_enabled="True" -s roofing_pattern="lines" -s travel_compensate_overlapping_walls_x_enabled="True" -s wall_line_width_0="0.4" -s cross_infill_pocket_size="1.25" -s raft_margin="15" -s support_bottom_stair_step_height="0.3" -s brim_outside_only="True" -s material_standby_temperature="175" -s speed_roofing="15.0" -s roofing_line_width="0.4" -s speed_support="30" -s ironing_inset="0.2" -s bridge_fan_speed_3="0" -s support_tree_branch_diameter_angle="5" -s support_infill_rate="0" -s infill_randomize_start_location="False" -s mesh_position_y="0" -s wall_line_count="6" -s magic_fuzzy_skin_point_density="1.25" -s platform_adhesion="0" -s support_bottom_stair_step_width="5.0" -s speed_z_hop="10" -s retraction_speed="40" -s wall_0_material_flow="100" -s cool_min_speed="10" -s bridge_skin_density="100" -s raft_base_line_width="0.8" -s machine_nozzle_offset_y="0" -s extruder_nr="0" -s infill_overlap="14" -s support_interface_material_flow="100" -s magic_mesh_surface_mode="normal" -s raft_fan_speed="0" -s raft_interface_line_width="0.8" -s material_surface_energy="100" -s retraction_extrusion_window="2.5" -s support_fan_enable="False" -s machine_extruder_start_pos_y="0" -s extruder_prime_pos_abs="False" -s material_adhesion_tendency="0" -s infill_sparse_thickness="0.1" -s skin_no_small_gaps_heuristic="False" -s machine_nozzle_head_distance="3" -s support_brim_width="8.0" -s top_layers="6" -s material_break_preparation_temperature="220" -s layer_start_x="0.0" -s machine_min_cool_heat_time_window="50.0" -s support_bottom_line_distance="0.4" -s zig_zaggify_infill="False" -s wall_min_flow="0" -s ironing_flow="10.0" -s support_roof_offset="0.0" -s acceleration_support_roof="3000" -s acceleration_prime_tower="3000" -s skirt_gap="3" -s line_width="0.4" -s optimize_wall_printing_order="False" -s raft_acceleration="3000" -s support_bottom_height="1" -s raft_base_acceleration="3000" -s skirt_line_count="4" -s retraction_count_max="90" -s ironing_only_highest_layer="False" -s acceleration_topbottom="3000" -s machine_settings="0" -s small_hole_max_size="0" -s brim_line_count="8" -s support_roof_line_distance="0.4" -s infill_line_width="0.4" -s magic_fuzzy_skin_outside_only="False" -s prime_tower_line_width="0.4" -s jerk_print_layer_0="20" -s material_anti_ooze_retracted_position="-4" -s support_interface_angles="[ ]" -s bottom_thickness="0.8" -s speed_equalize_flow_max="150" -s jerk_roofing="20" -s minimum_roof_area="1.0" -s machine_extruder_cooling_fan_number="0" -s machine_nozzle_size="0.4" -s raft_interface_jerk="20" -s material_shrinkage_percentage="0" -s support_roof_density="100" -s spaghetti_max_height="2.0" -s bridge_skin_support_threshold="50" -s material_linear_advance_factor_topbottom="0" -s material_print_temperature="220" -s retraction_extra_prime_amount="0" -s default_material_print_temperature="200" -s roofing_layer_count="0" -s wall_0_inset="0" -s brim_width="8.0" -s speed_support_infill="30" -s raft_base_line_spacing="1.6" -s max_extrusion_before_wipe="10" -s roofing_material_flow="100" -s prime_tower_flow="100" -s acceleration_ironing="3000" -s raft_interface_acceleration="3000" -s spaghetti_infill_stepped="True" -s raft_surface_fan_speed="0" -s jerk_print="20" -s z_seam_y="190" -s retraction_min_travel="0.8" -s acceleration_layer_0="3000" -s material_break_speed="25" -s ironing_line_spacing="0.1" -s raft_airgap="0.3" -s material_flush_purge_speed="0.5" -s skin_line_width="0.4" -s machine_steps_per_mm_z="50" -s skin_angles="[ ]" -s skin_preshrink="2.4" -s clean_between_layers="False" -s travel="0" -s raft_surface_thickness="0.1" -s top_skin_preshrink="2.4" -s jerk_support_interface="20" -s cross_infill_density_image="" -s support_interface_line_width="0.4" -s support_skip_zag_per_mm="20" -s support_bottom_angles="[ ]" -s ironing_pattern="zigzag" -s speed_travel="150" -s support_angle="70" -s raft_base_speed="11.25" -s layer_0_z_overlap="0.15" -s top_skin_expand_distance="2.4" -s sub_div_rad_add="0.4" -s z_seam_corner="z_seam_corner_inner" -s roofing_angles="[ ]" -s jerk_ironing="20" -s top_bottom_thickness="0.8" -s support_top_distance="0.1" -s retraction_hop_after_extruder_switch="True" -s jerk_topbottom="20" -s bridge_wall_coast="100" -s raft_interface_fan_speed="0" -s raft_interface_thickness="0.15000000000000002" -s meshfix_maximum_travel_resolution="0.8" -s machine_feeder_wheel_diameter="10.0" -s retraction_hop_only_when_collides="False" -s coasting_enable="False" -s mold_roof_height="0.5" -g -e0 -l "0" -s extruder_nr="0"
2020-02-29 14:05:11,861 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 43 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-02-29 14:05:12,106 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 14:05:12,109 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 14:05:12,115 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [663]: Slicing took 1.9670031070709229 seconds
2020-02-29 14:05:12,115 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [664]: Number of models per buildplate: {0: 1}
2020-02-29 14:05:12,115 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [678]: See if there is more to slice...
2020-02-29 14:05:12,341 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [181]: Socket state changed to Closing
2020-02-29 14:05:12,344 - DEBUG - [MainThread] UM.Backend.Backend._onSocketError [203]: Socket debug: Arcus Error (13): Closing socket because other side requested close.
2020-02-29 14:05:12,346 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [183]: Socket state changed to Closed
2020-02-29 14:05:12,346 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onBackendQuit [829]: Backend quit with return code 0. Resetting process and socket.
2020-02-29 14:05:13,900 - DEBUG - [MainThread] LinearAdvanceSettingPlugin.LinearAdvanceSettingPlugin._filterGcode [109]: No used extruders specify a linear advance factor
2020-02-29 14:05:14,123 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.requestWrite [374]: Tried starting a print, but current state is printing
2020-02-29 14:05:14,136 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._processRequest [308]: Request [834f48cf114a4609964babd4cc0461ee] started
2020-02-29 14:05:14,140 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-02-29 14:05:14,647 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestFinished [369]: Request [834f48cf114a4609964babd4cc0461ee] finished.
2020-02-29 14:05:14,650 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-02-29 14:05:14,651 - INFO - [MainThread] SliceInfoPlugin.SliceInfo._onRequestFinished [275]: SliceInfo sent successfully
2020-02-29 14:05:17,751 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-02-29 14:05:18,294 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-02-29 14:05:27,367 - INFO - [MainThread] cura.UI.MachineActionManager.addDefaultMachineActions [56]: Default machine actions have been added for machine definition [wanhao_i3plus], do nothing.
2020-02-29 14:05:27,583 - INFO - [MainThread] cura.Settings.GlobalStack.addExtruder [184]: Extruder[wanhao_i3plus_extruder_0 #2] added to [Wanhao Duplicator i3 Plus] at position [0]
2020-02-29 14:05:27,586 - WARNING - [MainThread] cura.Settings.ExtruderManager.registerExtruder [156]: Extruder [wanhao_i3plus_extruder_0 #2] has already been registered on machine [Wanhao Duplicator i3 Plus], not doing anything
2020-02-29 14:05:27,589 - INFO - [MainThread] UM.Logger.info [112]: Initializing Active Machine...
2020-02-29 14:05:27,599 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 14:05:27,602 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 14:05:27,848 - WARNING - [MainThread] UM.OutputDevice.OutputDeviceManager.removeOutputDevice [179]: Could not find output device with id GreyLeader to remove
2020-02-29 14:05:27,850 - WARNING - [MainThread] UM.OutputDevice.OutputDeviceManager.removeOutputDevice [179]: Could not find output device with id GreyLeader to remove
2020-02-29 14:05:27,853 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-02-29 14:05:27,858 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [303]: Connection with instance OrangeLeader with url http://192.168.2.162:80/ started
2020-02-29 14:05:27,872 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/SettingsMenu.qml:51: TypeError: Cannot read property 'isEnabled' of undefined
2020-02-29 14:05:27,877 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/SettingsMenu.qml:44: TypeError: Cannot read property 'isEnabled' of undefined
2020-02-29 14:05:27,883 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/MaterialMenu.qml:26: TypeError: Cannot read property 'isEnabled' of undefined
2020-02-29 14:05:27,888 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/MaterialMenu.qml:28: TypeError: Cannot read property 'material' of undefined
2020-02-29 14:05:27,894 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-02-29 14:05:27,959 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-02-29 14:05:27,976 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-02-29 14:05:27,979 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-02-29 14:05:28,330 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [135]: New error check scheduled.
2020-02-29 14:05:28,980 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-02-29 14:05:28,988 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [63]: Updating QualityProfilesDropDownMenuModel.
2020-02-29 14:05:28,994 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device OrangeLeader already added
2020-02-29 14:05:29,485 - INFO - [MainThread] cura.Machines.MachineErrorChecker._setResult [187]: Error check finished, result = False, time = 1.2s
2020-02-29 14:05:29,812 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [741]: Set OctoPrint camera url to http://192.168.2.162:80/webcam/?action=stream
2020-02-29 14:05:30,161 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [225]: Starting to slice...
2020-02-29 14:05:30,162 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [243]: Going to slice build plate [0]!
2020-02-29 14:05:30,166 - DEBUG - [MainThread] UM.Backend.Backend._createSocket [213]: Previous socket existed. Closing that first.
2020-02-29 14:05:30,211 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [173]: Socket state changed to Listening
2020-02-29 14:05:30,386 - INFO - [MainThread] UM.Backend.Backend.startEngine [81]: Started engine process: /Applications/Ultimaker Cura 3.app/Contents/MacOS/CuraEngine
2020-02-29 14:05:30,414 - DEBUG - [MainThread] UM.Backend.Backend._backendLog [101]: [Backend] Calling engine with: ['/Applications/Ultimaker Cura 3.app/Contents/MacOS/CuraEngine', 'connect', '127.0.0.1:49674', '']
2020-02-29 14:05:30,418 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-02-29 14:05:30,421 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [177]: Socket state changed to Connected
2020-02-29 14:05:30,423 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] Cura_SteamEngine version 4.5.0
2020-02-29 14:05:30,426 - DEBUG - [MainThread] UM.Backend.Backend._onSocketStateChanged [167]: Backend connected on port 49674
2020-02-29 14:05:30,428 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] Copyright (C) 2019 Ultimaker
2020-02-29 14:05:30,431 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-02-29 14:05:30,434 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] This program is free software: you can redistribute it and/or modify
2020-02-29 14:05:30,437 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] it under the terms of the GNU Affero General Public License as published by
2020-02-29 14:05:30,440 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] the Free Software Foundation, either version 3 of the License, or
2020-02-29 14:05:30,444 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] (at your option) any later version.
2020-02-29 14:05:30,448 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-02-29 14:05:30,452 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] This program is distributed in the hope that it will be useful,
2020-02-29 14:05:30,456 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] but WITHOUT ANY WARRANTY; without even the implied warranty of
2020-02-29 14:05:30,459 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
2020-02-29 14:05:30,461 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] GNU Affero General Public License for more details.
2020-02-29 14:05:30,464 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-02-29 14:05:30,467 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] You should have received a copy of the GNU Affero General Public License
2020-02-29 14:05:30,470 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] along with this program.  If not, see <http://www.gnu.org/licenses/>.
2020-02-29 14:05:30,572 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onStartSliceCompleted [429]: Sending slice message took 0.4106619358062744 seconds
2020-02-29 14:05:30,643 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING]  -s extruders_enabled_count="1" -s support_interface_density="100" -s cool_fan_speed="100.0" -s raft_base_thickness="0.36" -s bridge_skin_material_flow="60" -s slicing_tolerance="middle" -s material_end_of_filament_purge_speed="0.5" -s prime_tower_size="20" -s retraction_retract_speed="25" -s speed_layer_0="30.0" -s infill="0" -s small_feature_speed_factor="50" -s speed_prime_tower="60" -s support_brim_enable="False" -s infill_multiplier="1" -s gradual_support_infill_steps="0" -s initial_extruder_nr="0" -s infill_extruder_nr="-1" -s infill_sparse_density="20" -s bottom_skin_expand_distance="0.8" -s machine_nozzle_cool_down_speed="2.0" -s infill_offset_x="0" -s machine_depth="200" -s adhesion_z_offset_extensive_processing="False" -s limit_support_retractions="True" -s machine_max_acceleration_y="9000" -s infill_offset_y="0" -s acceleration_print_layer_0="3000" -s wall_min_flow_retract="False" -s speed_support_roof="40.0" -s xy_offset_layer_0="0" -s adhesion_type="skirt" -s z_seam_position="back" -s material_guid="" -s magic_spiralize="False" -s material_linear_advance_factor_support_interface="0" -s machine_max_acceleration_x="9000" -s material_linear_advance_factor_infill="0" -s print_temperature="210" -s skin_angles="[ ]" -s gradual_support_infill_step_height="1" -s support_conical_angle="30" -s raft_surface_acceleration="3000" -s jerk_layer_0="20" -s machine_max_feedrate_x="299792458000" -s support_pattern="lines" -s jerk_infill="20" -s speed_equalize_flow_enabled="False" -s top_thickness="0.8" -s bottom_skin_preshrink="0.8" -s raft_surface_line_spacing="0.4" -s wall_line_width="0.4" -s xy_offset="0" -s alternate_carve_order="True" -s travel_avoid_other_parts="True" -s raft_interface_speed="22.5" -s travel_avoid_distance="0.625" -s support_interface_height="1" -s jerk_travel_layer_0="30.0" -s date="29-02-2020" -s wireframe_flow="100" -s machine_acceleration="4000" -s machine_minimum_feedrate="0.0" -s skin_preshrink="0.8" -s jerk_wall="20" -s retract_at_layer_change="False" -s jerk_travel="30" -s support_skip_some_zags="False" -s minimum_roof_area="1.0" -s wireframe_flow_connection="100" -s bridge_skin_density="100" -s skirt_brim_line_width="0.4" -s top_bottom_pattern="lines" -s travel_compensate_overlapping_walls_0_enabled="True" -s flow_rate_max_extrusion_offset="0" -s material_diameter="2.85" -s support_bottom_line_width="0.4" -s raft_smoothing="5" -s speed_topbottom="30.0" -s wireframe_drag_along="0.6" -s material_break_speed="25" -s raft_interface_acceleration="3000" -s minimum_polygon_circumference="1.0" -s support_interface_skip_height="0.3" -s speed_print="60" -s skin_edge_support_layers="0" -s support_type="buildplate" -s support_roof_line_width="0.4" -s wireframe_printspeed_bottom="5" -s raft_surface_line_width="0.4" -s prime_tower_min_volume="6" -s prime_blob_enable="False" -s switch_extruder_prime_speed="20" -s wall_x_extruder_nr="-1" -s machine_steps_per_mm_z="50" -s smooth_spiralized_contours="True" -s ooze_shield_dist="2" -s bridge_wall_material_flow="50" -s cool_fan_full_layer="2" -s roofing_material_flow="100" -s wipe_hop_speed="10" -s infill_angles="[ ]" -s infill_line_distance="4.0" -s minimum_bottom_area="1.0" -s minimum_support_area="0.0" -s material_linear_advance_factor_wall_0="0" -s wall_0_wipe_dist="0.2" -s switch_extruder_extra_prime_amount="0" -s material_extrusion_cool_down_speed="0.7" -s wall_x_material_flow="100" -s support_xy_distance_overhang="0.2" -s wireframe_printspeed_up="5" -s resolution="0" -s retraction_hop="1" -s jerk_wall_0="20" -s skin_material_flow="100" -s support_bottom_density="100" -s jerk_support_interface="20" -s material_print_temperature_layer_0="210" -s retraction_min_travel="0.8" -s support_xy_overrides_z="z_overrides_xy" -s min_infill_area="0" -s machine_nozzle_tip_outer_diameter="1" -s machine_steps_per_mm_x="50" -s material_break_preparation_temperature="210" -s machine_nozzle_size="0.4" -s support_initial_layer_line_distance="2.6666666666666665" -s center_object="False" -s spaghetti_inset="0.2" -s mold_enabled="False" -s acceleration_travel="5000" -s acceleration_wall="3000" -s support_bottom_material_flow="100" -s ironing_enabled="False" -s cooling="0" -s support_infill_angles="[ ]" -s shell="0" -s bridge_skin_material_flow_2="100" -s speed_support_interface="40.0" -s meshfix="0" -s acceleration_skirt_brim="3000" -s support_line_distance="2.6666666666666665" -s retraction_enable="True" -s retraction_hop_enabled="False" -s switch_extruder_retraction_speed="20" -s acceleration_roofing="3000" -s anti_overhang_mesh="False" -s cool_min_layer_time_fan_speed_max="10" -s wipe_retraction_speed="25" -s retraction_amount="6.5" -s retraction_combing="all" -s material_flow_layer_0="100" -s wall_material_flow="100" -s extruder_prime_pos_z="0" -s support_tower_roof_angle="65" -s connect_skin_polygons="False" -s infill_pattern="grid" -s magic_fuzzy_skin_thickness="0.3" -s meshfix_extensive_stitching="False" -s infill_wipe_dist="0.1" -s skirt_brim_material_flow="100" -s bridge_skin_speed="15.0" -s mesh_position_x="0" -s prime_tower_position_y="175.6" -s jerk_wall_x="20" -s support_bottom_extruder_nr="0" -s support_roof_height="1.2" -s cutting_mesh="False" -s machine_max_jerk_xy="20.0" -s support_material_flow="100" -s bridge_fan_speed="100" -s support_line_width="0.4" -s ooze_shield_enabled="False" -s support_extruder_nr="0" -s wall_thickness="0.8" -s support_bottom_distance="0" -s material_crystallinity="False" -s machine_steps_per_mm_e="1600" -s dual="0" -s support_bottom_enable="False" -s wireframe_nozzle_clearance="1" -s speed_infill="60" -s machine_nozzle_id="unknown" -s wipe_brush_pos_x="100" -s acceleration_travel_layer_0="5000.0" -s meshfix_maximum_deviation="0.05" -s cool_fan_enabled="True" -s wall_overhang_angle="90" -s cool_fan_speed_max="100.0" -s raft_surface_layers="2" -s skirt_brim_minimal_length="250" -s material_linear_advance_factor="0" -s cool_min_layer_time="5" -s day="Sat" -s wipe_retraction_enable="True" -s travel_avoid_supports="False" -s acceleration_infill="3000" -s material_bed_temperature="64" -s bridge_skin_material_flow_3="110" -s bridge_fan_speed_2="0" -s initial_bottom_layers="8" -s support_interface_pattern="concentric" -s cross_infill_density_image="" -s adaptive_layer_height_variation="0.1" -s infill_wall_line_count="0" -s support_supported_skin_fan_speed="100" -s extruder_prime_pos_y="0" -s machine_name="Wanhao Duplicator i3 Plus" -s retraction_prime_speed="25" -s material_linear_advance_factor_prime_tower="0" -s z_seam_type="sharpest_corner" -s meshfix_keep_open_polygons="False" -s support_use_towers="True" -s infill_support_enabled="False" -s cool_fan_speed_0="0" -s support_brim_line_count="20" -s blackmagic="0" -s material_print_temp_wait="True" -s support_roof_angles="[ ]" -s infill_mesh_order="0" -s support="0" -s spaghetti_infill_enabled="False" -s acceleration_support="3000" -s support_interface_offset="0.0" -s support_tree_enable="False" -s acceleration_wall_0="3000" -s wireframe_top_jump="0.6" -s jerk_support_bottom="20" -s speed_support_bottom="40.0" -s support_conical_min_width="5.0" -s bottom_layers="8" -s material_flow_dependent_temperature="False" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s support_wall_count="0" -s machine_max_acceleration_z="100" -s skin_edge_support_thickness="0" -s coasting_min_volume="0.8" -s material_linear_advance_factor_wall="0" -s cool_fan_full_at_height="0.3" -s draft_shield_dist="10" -s layer_height="0.1" -s material_break_preparation_retracted_position="-16" -s infill_mesh="False" -s mold_angle="40" -s raft_speed="30.0" -s machine_max_jerk_z="0.4" -s support_tree_angle="40" -s wall_line_width_0="0.4" -s cross_infill_pocket_size="4.0" -s machine_max_jerk_e="5.0" -s raft_margin="15" -s raft_surface_speed="30.0" -s infill_enable_travel_optimization="False" -s machine_height="180" -s travel_retract_before_outer_wall="False" -s infill_support_angle="40" -s adaptive_layer_height_variation_step="0.01" -s raft_surface_jerk="20" -s bridge_sparse_infill_max_density="0" -s wireframe_printspeed_flat="5" -s draft_shield_height_limitation="full" -s magic_fuzzy_skin_enabled="False" -s jerk_enabled="False" -s support_mesh_drop_down="True" -s wireframe_roof_fall_down="2" -s wireframe_strategy="compensate" -s machine_gcode_flavor="RepRap (Marlin/Sprinter)" -s conical_overhang_angle="50" -s infill_overlap_mm="0.04" -s mesh_position_z="0" -s travel_speed="120" -s speed="0" -s small_hole_max_size="0" -s material_bed_temp_prepend="True" -s material="0" -s infill_before_walls="True" -s meshfix_maximum_resolution="0.5" -s wipe_repeat_count="5" -s support_tree_branch_distance="1" -s retraction_speed="25" -s gradual_infill_steps="0" -s machine_show_variants="False" -s support_interface_material_flow="100" -s infill_overlap="10" -s jerk_support="20" -s wall_line_width_x="0.4" -s roofing_extruder_nr="-1" -s raft_base_acceleration="3000" -s wall_extruder_nr="-1" -s adaptive_layer_height_threshold="0.2" -s min_skin_width_for_expansion="4.898587196589413e-17" -s material_no_load_move_factor="0.940860215" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s max_skin_angle_for_expansion="90" -s sub_div_rad_add="0.4" -s support_tree_branch_diameter_angle="5" -s top_bottom_pattern_0="lines" -s alternate_extra_perimeter="False" -s support_roof_enable="True" -s bridge_wall_coast="100" -s raft_interface_fan_speed="0" -s support_offset="0" -s wireframe_fall_down="0.5" -s material_flow="100" -s cross_support_density_image="" -s wireframe_height="3" -s z_seam_relative="False" -s support_tower_maximum_supported_diameter="3.0" -s support_interface_extruder_nr="0" -s nozzle_disallowed_areas="[]" -s support_xy_distance="0.7" -s speed_wall="30.0" -s bridge_enable_more_layers="True" -s conical_overhang_enabled="False" -s speed_travel_layer_0="60.0" -s draft_shield_height="10" -s z_seam_x="100.0" -s retraction_combing_max_distance="0" -s support_infill_rate="15" -s spaghetti_max_infill_angle="10" -s acceleration_support_interface="3000" -s machine_feeder_wheel_diameter="10.0" -s retraction_hop_only_when_collides="False" -s extruder_prime_pos_x="0" -s build_volume_temperature="28" -s layer_start_y="0.0" -s material_break_retracted_position="-50" -s material_initial_print_temperature="200" -s support_infill_extruder_nr="0" -s coasting_speed="90" -s carve_multiple_volumes="False" -s flow_rate_extrusion_offset_factor="100" -s acceleration_wall_x="3000" -s skin_overlap_mm="0.02" -s small_feature_max_length="0.0" -s wall_0_extruder_nr="-1" -s material_maximum_park_duration="300" -s machine_nozzle_temp_enabled="True" -s switch_extruder_retraction_amount="16" -s skirt_brim_speed="30.0" -s wipe_retraction_extra_prime_amount="0" -s ironing_only_highest_layer="False" -s acceleration_topbottom="3000" -s machine_settings="0" -s adhesion_extruder_nr="0" -s mold_width="5" -s jerk_support_infill="20" -s wall_overhang_speed_factor="100" -s jerk_prime_tower="20" -s skin_outline_count="1" -s bridge_skin_speed_2="15.0" -s machine_max_feedrate_y="299792458000" -s support_roof_material_flow="100" -s bridge_skin_density_2="75" -s support_tower_diameter="3.0" -s material_linear_advance_factor_support="0" -s command_line_settings="0" -s brim_replaces_support="True" -s prime_tower_wipe_enabled="True" -s fill_perimeter_gaps="everywhere" -s skin_overlap="5" -s print_sequence="all_at_once" -s acceleration_support_infill="3000" -s brim_gap="0" -s spaghetti_infill_extra_volume="0" -s support_connect_zigzags="True" -s adaptive_layer_height_enabled="False" -s travel_compensate_overlapping_walls_enabled="True" -s roofing_pattern="lines" -s fill_outline_gaps="False" -s support_zag_skip_count="8" -s machine_filament_park_distance="16" -s acceleration_print="3000" -s material_linear_advance_factor_wall_x="0" -s material_final_print_temperature="195" -s ooze_shield_angle="60" -s machine_endstop_positive_direction_x="False" -s travel_compensate_overlapping_walls_x_enabled="True" -s coasting_volume="0.064" -s machine_endstop_positive_direction_z="True" -s small_feature_speed_factor_0="50" -s machine_shape="rectangular" -s machine_heated_bed="True" -s machine_use_extruder_offset_to_offset_coords="True" -s brim_outside_only="True" -s material_standby_temperature="150" -s support_bottom_stair_step_height="0.3" -s speed_roofing="30.0" -s roofing_line_width="0.4" -s material_print_temp_prepend="True" -s wireframe_printspeed_down="5" -s minimum_interface_area="1.0" -s draft_shield_enabled="False" -s speed_support="60" -s adhesion_z_offset="0" -s wireframe_roof_outer_delay="0.2" -s ironing_inset="0.2" -s bridge_fan_speed_3="0" -s initial_layer_line_width_factor="100.0" -s machine_start_gcode="" -s experimental="0" -s bridge_wall_min_length="5" -s prime_tower_position_x="195.6" -s wipe_retraction_amount="6.5" -s material_break_temperature="50" -s top_bottom_extruder_nr="-1" -s acceleration_support_roof="3000" -s support_roof_offset="0.0" -s wall_0_material_flow="100" -s wireframe_flow_flat="100" -s speed_print_layer_0="30.0" -s default_material_bed_temperature="60" -s raft_jerk="20" -s machine_end_gcode="" -s machine_center_is_zero="False" -s support_conical_enabled="False" -s material_anti_ooze_retraction_speed="5" -s machine_head_with_fans_polygon="[[-20, 10], [10, 10], [10, -10], [10, -10]]" -s z_seam_corner="z_seam_corner_inner" -s support_interface_angles="[ ]" -s bottom_thickness="0.8" -s raft_interface_line_spacing="1.0" -s material_flush_purge_length="60" -s machine_nozzle_heat_up_speed="2.0" -s cool_fan_speed_min="100.0" -s wipe_move_distance="20" -s bridge_skin_speed_3="15.0" -s magic_fuzzy_skin_point_dist="0.8" -s filter_out_tiny_gaps="True" -s spaghetti_flow="20" -s machine_heated_build_volume="False" -s extruder_prime_pos_abs="False" -s material_adhesion_tendency="10" -s infill_sparse_thickness="0.1" -s speed_wall_0="30.0" -s machine_extruders_share_heater="False" -s cool_lift_head="False" -s zig_zaggify_infill="False" -s acceleration_enabled="False" -s support_roof_extruder_nr="0" -s layer_start_x="0.0" -s machine_min_cool_heat_time_window="50.0" -s multiple_mesh_overlap="0.15" -s wipe_retraction_retract_speed="25" -s support_bottom_pattern="concentric" -s material_break_preparation_speed="2" -s acceleration_support_bottom="3000" -s material_end_of_filament_purge_length="20" -s wireframe_roof_drag_along="0.8" -s support_bottom_line_distance="0.4" -s wall_min_flow="0" -s ironing_flow="10.0" -s acceleration_prime_tower="3000" -s retraction_hop_after_extruder_switch_height="1" -s skirt_gap="3" -s speed_ironing="20.0" -s machine_max_acceleration_e="10000" -s line_width="0.4" -s zig_zaggify_support="False" -s wipe_hop_enable="False" -s optimize_wall_printing_order="False" -s raft_interface_line_width="0.8" -s gantry_height="180" -s material_surface_energy="100" -s print_bed_temperature="64" -s magic_mesh_surface_mode="normal" -s raft_fan_speed="0" -s wireframe_up_half_speed="0.3" -s machine_max_feedrate_e="299792458000" -s spaghetti_infill_stepped="True" -s raft_surface_fan_speed="0" -s meshfix_union_all_remove_holes="False" -s speed_wall_x="60.0" -s raft_base_jerk="20" -s machine_extruder_count="1" -s jerk_support_roof="20" -s wireframe_top_delay="0" -s machine_endstop_positive_direction_y="False" -s jerk_topbottom="20" -s remove_empty_first_layers="True" -s support_bottom_height="1" -s raft_acceleration="3000" -s jerk_print_layer_0="20" -s wireframe_roof_inset="3" -s material_anti_ooze_retracted_position="-4" -s expand_skins_expand_distance="0.8" -s bridge_wall_speed="15.0" -s support_bottom_offset="0.0" -s wireframe_flat_delay="0.1" -s machine_nozzle_expansion_angle="45" -s brim_line_count="20" -s support_roof_line_distance="0.4" -s prime_tower_line_width="0.4" -s infill_line_width="0.4" -s magic_fuzzy_skin_outside_only="False" -s speed_equalize_flow_max="150" -s jerk_roofing="20" -s raft_base_line_width="0.8" -s coasting_enable="False" -s support_interface_line_width="0.4" -s support_bottom_angles="[ ]" -s support_skip_zag_per_mm="20" -s support_extruder_nr_layer_0="0" -s meshfix_maximum_travel_resolution="0.8" -s cool_min_speed="10" -s machine_disallowed_areas="[]" -s support_interface_enable="False" -s bridge_skin_density_3="80" -s machine_max_feedrate_z="299792458000" -s support_roof_density="100" -s spaghetti_max_height="2.0" -s skirt_line_count="4" -s retraction_count_max="90" -s retraction_extrusion_window="6.5" -s support_fan_enable="False" -s support_roof_pattern="concentric" -s support_mesh="False" -s wireframe_straight_before_down="20" -s material_print_temperature="210" -s retraction_extra_prime_amount="0" -s wireframe_printspeed="5" -s machine_steps_per_mm_y="50" -s support_tree_branch_diameter="2" -s speed_slowdown_layers="2" -s default_material_print_temperature="210" -s roofing_layer_count="0" -s relative_extrusion="False" -s wall_0_inset="0" -s brim_width="8.0" -s speed_support_infill="60" -s raft_base_line_spacing="1.6" -s max_extrusion_before_wipe="10" -s ironing_pattern="zigzag" -s speed_travel="120" -s support_angle="70" -s raft_base_speed="22.5" -s layer_0_z_overlap="0.15" -s speed_z_hop="10" -s platform_adhesion="0" -s support_bottom_stair_step_width="5.0" -s raft_interface_jerk="20" -s material_shrinkage_percentage="0" -s ironing_line_spacing="0.1" -s skin_line_width="0.4" -s connect_infill_polygons="False" -s wireframe_bottom_delay="0" -s mesh_position_y="0" -s infill_randomize_start_location="False" -s machine_nozzle_head_distance="3" -s support_brim_width="8.0" -s top_layers="8" -s support_infill_sparse_thickness="0.1" -s material_bed_temperature_layer_0="64" -s clean_between_layers="False" -s travel="0" -s material_bed_temp_wait="True" -s raft_airgap="0.3" -s material_flush_purge_speed="0.5" -s support_enable="False" -s prime_tower_enable="False" -s raft_surface_thickness="0.1" -s jerk_skirt_brim="20" -s machine_heat_zone_length="16" -s gradual_infill_step_height="1.5" -s outer_inset_first="False" -s prime_tower_brim_enable="False" -s top_skin_preshrink="0.8" -s top_skin_expand_distance="0.8" -s jerk_print="20" -s mold_roof_height="0.5" -s jerk_ironing="20" -s roofing_angles="[ ]" -s support_top_distance="0.1" -s retraction_hop_after_extruder_switch="True" -s material_linear_advance_factor_skirt_brim="0" -s layer_height_0="0.3" -s switch_extruder_retraction_speeds="20" -s machine_firmware_retract="False" -s meshfix_union_all="True" -s support_z_distance="0.1" -s bridge_settings_enabled="False" -s z_seam_y="200" -s acceleration_layer_0="3000" -s raft_interface_thickness="0.15000000000000002" -s wall_line_count="2" -s magic_fuzzy_skin_point_density="1.25" -s top_bottom_thickness="0.8" -s machine_width="200" -s prime_tower_flow="100" -s acceleration_ironing="3000" -s raft_base_fan_speed="0" -s support_tree_collision_resolution="0.2" -s skin_no_small_gaps_heuristic="False" -s wipe_hop_amount="1" -s support_join_distance="2.0" -s machine_buildplate_type="glass" -s time="14:05:30" -s infill_material_flow="100" -s wireframe_enabled="False" -s material_linear_advance_factor_topbottom="0" -s wipe_retraction_prime_speed="25" -s wipe_pause="0" -s bridge_skin_support_threshold="50" -e0 -s switch_extruder_retraction_speeds="20" -s support_interface_density="100" -s cool_fan_speed="80" -s raft_base_thickness="0.36" -s machine_nozzle_offset_x="0" -s initial_layer_line_width_factor="100.0" -s bridge_skin_material_flow="60" -s material_end_of_filament_purge_speed="0.5" -s retraction_retract_speed="65" -s speed_layer_0="12" -s infill="0" -s small_feature_speed_factor="50" -s support_infill_sparse_thickness="0.1" -s speed_prime_tower="60" -s support_brim_enable="False" -s infill_multiplier="1" -s gradual_support_infill_steps="0" -s infill_sparse_density="10" -s bottom_skin_expand_distance="1.6" -s machine_nozzle_cool_down_speed="2.0" -s infill_offset_x="0" -s limit_support_retractions="True" -s machine_extruder_end_pos_x="0" -s infill_offset_y="0" -s acceleration_print_layer_0="3000" -s wall_min_flow_retract="False" -s speed_support_roof="40.0" -s xy_offset_layer_0="0" -s z_seam_position="back" -s material_guid="0ff92885-617b-4144-a03c-9989872454bc" -s material_linear_advance_factor_support_interface="0" -s material_linear_advance_factor_infill="0" -s material_break_preparation_speed="2" -s acceleration_support_bottom="3000" -s material_end_of_filament_purge_length="20" -s gradual_support_infill_step_height="1" -s support_conical_angle="30" -s raft_surface_acceleration="3000" -s support_roof_pattern="concentric" -s jerk_layer_0="20" -s support_pattern="lines" -s jerk_infill="20" -s speed_equalize_flow_enabled="False" -s top_thickness="0.8" -s bottom_skin_preshrink="1.6" -s raft_surface_line_spacing="0.4" -s skin_edge_support_layers="0" -s wall_line_width="0.4" -s xy_offset="0" -s travel_avoid_other_parts="True" -s raft_interface_speed="22.5" -s travel_avoid_distance="0.625" -s support_interface_height="1" -s wipe_move_distance="20" -s cool_fan_speed_min="80" -s acceleration_skirt_brim="3000" -s meshfix="0" -s support_bottom_material_flow="100" -s acceleration_wall="3000" -s ironing_enabled="False" -s acceleration_travel="5000" -s support_supported_skin_fan_speed="100" -s infill_wall_line_count="0" -s support_wall_count="0" -s skin_edge_support_thickness="0" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s experimental="0" -s support_skip_some_zags="False" -s travel_compensate_overlapping_walls_0_enabled="True" -s support_bottom_line_width="0.4" -s material_flow="100" -s support_offset="0" -s raft_smoothing="5" -s speed_topbottom="30.0" -s wipe_hop_enable="False" -s zig_zaggify_support="False" -s speed_print="60" -s prime_tower_min_volume="6" -s jerk_travel="30" -s material_linear_advance_factor_skirt_brim="0" -s support_tree_branch_diameter="2" -s machine_steps_per_mm_y="50" -s acceleration_support_interface="3000" -s spaghetti_max_infill_angle="10" -s bridge_wall_material_flow="50" -s wipe_hop_speed="10" -s jerk_wall_0="20" -s retraction_hop="1" -s wipe_pause="0" -s wipe_retraction_prime_speed="65" -s minimum_support_area="0.0" -s material_linear_advance_factor_wall_0="0" -s wall_0_wipe_dist="0.2" -s switch_extruder_extra_prime_amount="0" -s support_tower_maximum_supported_diameter="3.0" -s spaghetti_infill_extra_volume="0" -s support_connect_zigzags="True" -s support_xy_distance_overhang="0.2" -s bridge_skin_density_3="80" -s support_interface_enable="False" -s resolution="0" -s support_line_width="0.4" -s material_break_preparation_retracted_position="-16" -s support_xy_overrides_z="z_overrides_xy" -s min_infill_area="0" -s machine_nozzle_tip_outer_diameter="1" -s machine_steps_per_mm_x="50" -s infill_angles="[ ]" -s minimum_interface_area="1.0" -s skirt_brim_line_width="0.4" -s top_bottom_pattern="lines" -s cool_fan_full_layer="2" -s center_object="False" -s spaghetti_inset="0.2" -s gradual_infill_steps="0" -s jerk_travel_layer_0="30.0" -s mold_enabled="False" -s raft_surface_line_width="0.4" -s cooling="0" -s support_tree_collision_resolution="0.2" -s raft_base_fan_speed="0" -s material_print_temperature_layer_0="220" -s raft_interface_line_spacing="1.0" -s machine_nozzle_heat_up_speed="2.0" -s material_flush_purge_length="60" -s bridge_skin_material_flow_2="100" -s speed_support_interface="40.0" -s support_interface_offset="0.0" -s jerk_support="20" -s wall_line_width_x="0.4" -s support_line_distance="2.6666666666666665" -s retraction_enable="True" -s switch_extruder_retraction_speed="20" -s retraction_hop_enabled="False" -s acceleration_roofing="3000" -s cool_min_layer_time_fan_speed_max="10" -s wipe_retraction_speed="65" -s retraction_amount="2.5" -s raft_speed="30.0" -s mold_angle="40" -s material_flow_layer_0="100" -s wall_material_flow="100" -s bridge_skin_material_flow_3="110" -s bridge_fan_speed_2="0" -s initial_bottom_layers="6" -s support_interface_pattern="concentric" -s connect_skin_polygons="False" -s infill_pattern="concentric" -s material_flow_dependent_temperature="False" -s bottom_layers="6" -s magic_fuzzy_skin_thickness="0.3" -s meshfix_extensive_stitching="False" -s infill_wipe_dist="0.1" -s machine_extruder_start_pos_abs="False" -s skirt_brim_material_flow="100" -s bridge_skin_speed="15.0" -s jerk_wall_x="20" -s wipe_retraction_amount="2.5" -s material_break_temperature="50" -s support_roof_height="1.2" -s magic_fuzzy_skin_enabled="False" -s connect_infill_polygons="False" -s machine_extruder_start_code="" -s support_material_flow="100" -s bridge_fan_speed="100" -s bridge_sparse_infill_max_density="0" -s wall_thickness="0.8" -s support_bottom_distance="0" -s material_crystallinity="False" -s machine_steps_per_mm_e="1600" -s jerk_wall="20" -s dual="0" -s support_bottom_enable="False" -s skin_overlap="5" -s speed_infill="60" -s machine_nozzle_id="unknown" -s wipe_brush_pos_x="100" -s acceleration_travel_layer_0="5000.0" -s raft_surface_layers="2" -s skirt_brim_minimal_length="250" -s material_linear_advance_factor="0" -s cool_min_layer_time="5" -s wipe_retraction_enable="True" -s travel_avoid_supports="False" -s acceleration_infill="3000" -s speed_ironing="20.0" -s support_roof_line_width="0.4" -s extruder_prime_pos_y="0" -s material_linear_advance_factor_prime_tower="0" -s retraction_prime_speed="65" -s z_seam_type="random" -s prime_blob_enable="False" -s meshfix_keep_open_polygons="False" -s raft_surface_speed="30.0" -s infill_enable_travel_optimization="False" -s machine_nozzle_temp_enabled="True" -s switch_extruder_retraction_amount="16" -s skirt_brim_speed="12" -s material_maximum_park_duration="300" -s infill_material_flow="100" -s support_use_towers="True" -s infill_support_enabled="False" -s cool_fan_speed_0="0" -s support_brim_line_count="20" -s blackmagic="0" -s multiple_mesh_overlap="0.15" -s wipe_retraction_retract_speed="65" -s material_linear_advance_factor_wall_x="0" -s acceleration_print="3000" -s support_bottom_pattern="concentric" -s meshfix_maximum_deviation="0.05" -s cool_fan_enabled="True" -s wall_overhang_angle="90" -s cool_fan_speed_max="80" -s machine_extruder_end_code="" -s support_roof_angles="[ ]" -s retraction_hop_after_extruder_switch_height="1" -s machine_extruder_end_pos_abs="False" -s support="0" -s spaghetti_infill_enabled="False" -s acceleration_support="3000" -s acceleration_wall_0="3000" -s jerk_support_bottom="20" -s material_extrusion_cool_down_speed="0.7" -s speed_support_bottom="40.0" -s support_conical_min_width="5.0" -s coasting_min_volume="0.8" -s material_linear_advance_factor_wall="0" -s cool_fan_full_at_height="0.3" -s support_infill_angles="[ ]" -s shell="0" -s support_tower_diameter="3.0" -s machine_extruder_start_pos_x="0" -s wipe_hop_amount="1" -s support_join_distance="2.0" -s support_tree_angle="40" -s fill_perimeter_gaps="everywhere" -s prime_tower_wipe_enabled="True" -s machine_heat_zone_length="16" -s jerk_skirt_brim="20" -s raft_jerk="20" -s speed_print_layer_0="12" -s command_line_settings="0" -s material_linear_advance_factor_support="0" -s conical_overhang_angle="50" -s infill_overlap_mm="0" -s mesh_position_z="0" -s speed="0" -s material_diameter="1.75" -s meshfix_union_all_remove_holes="False" -s gradual_infill_step_height="1.5" -s cool_lift_head="False" -s speed_wall_0="30.0" -s outer_inset_first="False" -s extruder_prime_pos_z="0" -s support_tower_roof_angle="65" -s meshfix_maximum_resolution="0.5" -s wipe_repeat_count="5" -s support_tree_branch_distance="1" -s wall_x_material_flow="100" -s min_skin_width_for_expansion="3.67394039744206e-17" -s material_no_load_move_factor="0.940860215" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s max_skin_angle_for_expansion="90" -s top_bottom_pattern_0="lines" -s alternate_extra_perimeter="False" -s support_roof_enable="True" -s slicing_tolerance="exclusive" -s machine_extruder_end_pos_y="0" -s cross_support_density_image="" -s z_seam_relative="False" -s support_xy_distance="0.7" -s speed_wall="30.0" -s material_final_print_temperature="205" -s machine_endstop_positive_direction_x="False" -s bridge_enable_more_layers="True" -s conical_overhang_enabled="False" -s speed_travel_layer_0="30.0" -s fill_outline_gaps="False" -s machine_filament_park_distance="16" -s support_zag_skip_count="8" -s material_break_retracted_position="-50" -s material_initial_print_temperature="210" -s switch_extruder_prime_speed="20" -s extruder_prime_pos_x="0" -s layer_start_y="0.0" -s filter_out_tiny_gaps="True" -s bridge_skin_speed_3="15.0" -s spaghetti_flow="20" -s magic_fuzzy_skin_point_dist="0.8" -s coasting_speed="90" -s skin_material_flow="100" -s support_bottom_density="100" -s acceleration_wall_x="3000" -s skin_overlap_mm="0.02" -s small_feature_max_length="0.0" -s support_initial_layer_line_distance="2.6666666666666665" -s support_bottom_offset="0.0" -s bridge_wall_speed="15.0" -s meshfix_union_all="True" -s support_z_distance="0.1" -s infill_line_distance="4.0" -s minimum_bottom_area="1.0" -s retraction_combing_max_distance="0" -s z_seam_x="100.0" -s expand_skins_expand_distance="1.6" -s mesh_position_x="0" -s wipe_retraction_extra_prime_amount="0" -s jerk_support_roof="20" -s machine_endstop_positive_direction_y="False" -s coasting_volume="0.064" -s machine_endstop_positive_direction_z="True" -s small_feature_speed_factor_0="50" -s infill_support_angle="40" -s raft_surface_jerk="20" -s support_interface_skip_height="0.3" -s mold_width="5" -s infill_before_walls="True" -s material="0" -s jerk_support_infill="20" -s wall_overhang_speed_factor="100" -s jerk_prime_tower="20" -s skin_outline_count="1" -s material_anti_ooze_retraction_speed="5" -s support_conical_enabled="False" -s bridge_skin_speed_2="15.0" -s retract_at_layer_change="False" -s raft_base_jerk="20" -s speed_wall_x="60.0" -s support_roof_material_flow="100" -s bridge_skin_density_2="75" -s brim_replaces_support="True" -s acceleration_support_infill="3000" -s brim_gap="0" -s travel_compensate_overlapping_walls_enabled="True" -s roofing_pattern="lines" -s travel_compensate_overlapping_walls_x_enabled="True" -s wall_line_width_0="0.4" -s cross_infill_pocket_size="4.0" -s raft_margin="15" -s support_bottom_stair_step_height="0.3" -s brim_outside_only="True" -s material_standby_temperature="175" -s speed_roofing="30.0" -s roofing_line_width="0.4" -s speed_support="60" -s ironing_inset="0.2" -s bridge_fan_speed_3="0" -s support_tree_branch_diameter_angle="5" -s support_infill_rate="15" -s infill_randomize_start_location="False" -s mesh_position_y="0" -s wall_line_count="4" -s magic_fuzzy_skin_point_density="1.25" -s platform_adhesion="0" -s support_bottom_stair_step_width="5.0" -s speed_z_hop="10" -s retraction_speed="65" -s wall_0_material_flow="100" -s cool_min_speed="10" -s bridge_skin_density="100" -s raft_base_line_width="0.8" -s machine_nozzle_offset_y="0" -s extruder_nr="0" -s infill_overlap="14" -s support_interface_material_flow="100" -s magic_mesh_surface_mode="normal" -s raft_fan_speed="0" -s raft_interface_line_width="0.8" -s material_surface_energy="100" -s retraction_extrusion_window="2.5" -s support_fan_enable="False" -s machine_extruder_start_pos_y="0" -s extruder_prime_pos_abs="False" -s material_adhesion_tendency="0" -s infill_sparse_thickness="0.1" -s skin_no_small_gaps_heuristic="False" -s machine_nozzle_head_distance="3" -s support_brim_width="8.0" -s top_layers="6" -s material_break_preparation_temperature="220" -s layer_start_x="0.0" -s machine_min_cool_heat_time_window="50.0" -s support_bottom_line_distance="0.4" -s zig_zaggify_infill="False" -s wall_min_flow="0" -s ironing_flow="10.0" -s support_roof_offset="0.0" -s acceleration_support_roof="3000" -s acceleration_prime_tower="3000" -s skirt_gap="3" -s line_width="0.4" -s optimize_wall_printing_order="False" -s raft_acceleration="3000" -s support_bottom_height="1" -s raft_base_acceleration="3000" -s skirt_line_count="4" -s retraction_count_max="90" -s ironing_only_highest_layer="False" -s acceleration_topbottom="3000" -s machine_settings="0" -s small_hole_max_size="0" -s brim_line_count="20" -s support_roof_line_distance="0.4" -s infill_line_width="0.4" -s magic_fuzzy_skin_outside_only="False" -s prime_tower_line_width="0.4" -s jerk_print_layer_0="20" -s material_anti_ooze_retracted_position="-4" -s support_interface_angles="[ ]" -s bottom_thickness="0.8" -s speed_equalize_flow_max="150" -s jerk_roofing="20" -s minimum_roof_area="1.0" -s machine_extruder_cooling_fan_number="0" -s machine_nozzle_size="0.4" -s raft_interface_jerk="20" -s material_shrinkage_percentage="0" -s support_roof_density="100" -s spaghetti_max_height="2.0" -s bridge_skin_support_threshold="50" -s material_linear_advance_factor_topbottom="0" -s material_print_temperature="220" -s retraction_extra_prime_amount="0" -s default_material_print_temperature="200" -s roofing_layer_count="0" -s wall_0_inset="0" -s brim_width="8.0" -s speed_support_infill="60" -s raft_base_line_spacing="1.6" -s max_extrusion_before_wipe="10" -s roofing_material_flow="100" -s prime_tower_flow="100" -s acceleration_ironing="3000" -s raft_interface_acceleration="3000" -s spaghetti_infill_stepped="True" -s raft_surface_fan_speed="0" -s jerk_print="20" -s z_seam_y="200" -s retraction_min_travel="0.8" -s acceleration_layer_0="3000" -s material_break_speed="25" -s ironing_line_spacing="0.1" -s raft_airgap="0.3" -s material_flush_purge_speed="0.5" -s skin_line_width="0.4" -s machine_steps_per_mm_z="50" -s skin_angles="[ ]" -s skin_preshrink="1.6" -s clean_between_layers="False" -s travel="0" -s raft_surface_thickness="0.1" -s top_skin_preshrink="1.6" -s jerk_support_interface="20" -s cross_infill_density_image="" -s support_interface_line_width="0.4" -s support_skip_zag_per_mm="20" -s support_bottom_angles="[ ]" -s ironing_pattern="zigzag" -s speed_travel="150" -s support_angle="70" -s raft_base_speed="22.5" -s layer_0_z_overlap="0.15" -s top_skin_expand_distance="1.6" -s sub_div_rad_add="0.4" -s z_seam_corner="z_seam_corner_inner" -s roofing_angles="[ ]" -s jerk_ironing="20" -s top_bottom_thickness="0.8" -s support_top_distance="0.1" -s retraction_hop_after_extruder_switch="True" -s jerk_topbottom="20" -s bridge_wall_coast="100" -s raft_interface_fan_speed="0" -s raft_interface_thickness="0.15000000000000002" -s meshfix_maximum_travel_resolution="0.8" -s machine_feeder_wheel_diameter="10.0" -s retraction_hop_only_when_collides="False" -s coasting_enable="False" -s mold_roof_height="0.5" -g -e0 -l "0" -s extruder_nr="0"
2020-02-29 14:05:31,511 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 43 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-02-29 14:05:31,675 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 14:05:31,679 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 14:05:31,684 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [663]: Slicing took 1.5219550132751465 seconds
2020-02-29 14:05:31,684 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [664]: Number of models per buildplate: {0: 1}
2020-02-29 14:05:31,684 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [678]: See if there is more to slice...
2020-02-29 14:05:31,890 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [181]: Socket state changed to Closing
2020-02-29 14:05:31,892 - DEBUG - [MainThread] UM.Backend.Backend._onSocketError [203]: Socket debug: Arcus Error (13): Closing socket because other side requested close.
2020-02-29 14:05:31,895 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [183]: Socket state changed to Closed
2020-02-29 14:05:31,895 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onBackendQuit [829]: Backend quit with return code 0. Resetting process and socket.
2020-02-29 14:05:38,300 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 14:05:38,303 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 14:05:38,511 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [135]: New error check scheduled.
2020-02-29 14:05:39,042 - INFO - [MainThread] cura.Machines.MachineErrorChecker._setResult [187]: Error check finished, result = False, time = 0.5s
2020-02-29 14:05:39,090 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [135]: New error check scheduled.
2020-02-29 14:05:39,437 - INFO - [MainThread] cura.Machines.MachineErrorChecker._setResult [187]: Error check finished, result = False, time = 0.3s
2020-02-29 14:05:44,798 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [135]: New error check scheduled.
2020-02-29 14:05:45,151 - INFO - [MainThread] cura.Machines.MachineErrorChecker._setResult [187]: Error check finished, result = False, time = 0.4s
2020-02-29 14:05:45,729 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [135]: New error check scheduled.
2020-02-29 14:05:46,087 - INFO - [MainThread] cura.Machines.MachineErrorChecker._setResult [187]: Error check finished, result = False, time = 0.4s
2020-02-29 14:05:46,296 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-02-29 14:05:47,356 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [135]: New error check scheduled.
2020-02-29 14:05:47,767 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._checkStack [139]: Need to check for errors again. Discard the current progress and reschedule a check.
2020-02-29 14:05:47,877 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [135]: New error check scheduled.
2020-02-29 14:05:48,161 - INFO - [MainThread] cura.Machines.MachineErrorChecker._setResult [187]: Error check finished, result = False, time = 0.3s
2020-02-29 14:05:48,885 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [135]: New error check scheduled.
2020-02-29 14:05:49,400 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._checkStack [139]: Need to check for errors again. Discard the current progress and reschedule a check.
2020-02-29 14:05:49,515 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [135]: New error check scheduled.
2020-02-29 14:05:49,799 - INFO - [MainThread] cura.Machines.MachineErrorChecker._setResult [187]: Error check finished, result = False, time = 0.3s
2020-02-29 14:05:51,176 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [225]: Starting to slice...
2020-02-29 14:05:51,176 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [243]: Going to slice build plate [0]!
2020-02-29 14:05:51,181 - DEBUG - [MainThread] UM.Backend.Backend._createSocket [213]: Previous socket existed. Closing that first.
2020-02-29 14:05:51,185 - WARNING - [Thread-4] UM.Decorators.deprecated_function [20]: <function GlobalStack.extruders at 0x600006f04c78> is deprecated (since 4.4): Please use extruderList instead.
2020-02-29 14:05:51,367 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [173]: Socket state changed to Listening
2020-02-29 14:05:51,429 - INFO - [MainThread] UM.Backend.Backend.startEngine [81]: Started engine process: /Applications/Ultimaker Cura 3.app/Contents/MacOS/CuraEngine
2020-02-29 14:05:51,431 - DEBUG - [MainThread] UM.Backend.Backend._backendLog [101]: [Backend] Calling engine with: ['/Applications/Ultimaker Cura 3.app/Contents/MacOS/CuraEngine', 'connect', '127.0.0.1:49674', '']
2020-02-29 14:05:51,436 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [177]: Socket state changed to Connected
2020-02-29 14:05:51,439 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-02-29 14:05:51,441 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] Cura_SteamEngine version 4.5.0
2020-02-29 14:05:51,445 - DEBUG - [MainThread] UM.Backend.Backend._onSocketStateChanged [167]: Backend connected on port 49674
2020-02-29 14:05:51,445 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] Copyright (C) 2019 Ultimaker
2020-02-29 14:05:51,448 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-02-29 14:05:51,450 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] This program is free software: you can redistribute it and/or modify
2020-02-29 14:05:51,453 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] it under the terms of the GNU Affero General Public License as published by
2020-02-29 14:05:51,456 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] the Free Software Foundation, either version 3 of the License, or
2020-02-29 14:05:51,458 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] (at your option) any later version.
2020-02-29 14:05:51,461 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-02-29 14:05:51,463 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] This program is distributed in the hope that it will be useful,
2020-02-29 14:05:51,465 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] but WITHOUT ANY WARRANTY; without even the implied warranty of
2020-02-29 14:05:51,468 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
2020-02-29 14:05:51,470 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] GNU Affero General Public License for more details.
2020-02-29 14:05:51,472 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-02-29 14:05:51,475 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] You should have received a copy of the GNU Affero General Public License
2020-02-29 14:05:51,477 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] along with this program.  If not, see <http://www.gnu.org/licenses/>.
2020-02-29 14:05:51,576 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onStartSliceCompleted [429]: Sending slice message took 0.39954090118408203 seconds
2020-02-29 14:05:51,673 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING]  -s extruders_enabled_count="1" -s support_interface_density="100" -s cool_fan_speed="100.0" -s raft_base_thickness="0.36" -s bridge_skin_material_flow="60" -s slicing_tolerance="middle" -s material_end_of_filament_purge_speed="0.5" -s prime_tower_size="20" -s retraction_retract_speed="25" -s speed_layer_0="30.0" -s infill="0" -s small_feature_speed_factor="50" -s speed_prime_tower="60" -s support_brim_enable="False" -s infill_multiplier="1" -s gradual_support_infill_steps="0" -s initial_extruder_nr="0" -s infill_extruder_nr="-1" -s infill_sparse_density="20" -s bottom_skin_expand_distance="0.8" -s machine_nozzle_cool_down_speed="2.0" -s infill_offset_x="0" -s machine_depth="200" -s adhesion_z_offset_extensive_processing="False" -s limit_support_retractions="True" -s machine_max_acceleration_y="9000" -s infill_offset_y="0" -s acceleration_print_layer_0="3000" -s wall_min_flow_retract="False" -s speed_support_roof="40.0" -s xy_offset_layer_0="0" -s adhesion_type="skirt" -s z_seam_position="back" -s material_guid="" -s magic_spiralize="False" -s material_linear_advance_factor_support_interface="0" -s machine_max_acceleration_x="9000" -s material_linear_advance_factor_infill="0" -s print_temperature="210" -s skin_angles="[ ]" -s gradual_support_infill_step_height="1" -s support_conical_angle="30" -s raft_surface_acceleration="3000" -s jerk_layer_0="20" -s machine_max_feedrate_x="299792458000" -s support_pattern="lines" -s jerk_infill="20" -s speed_equalize_flow_enabled="False" -s top_thickness="0.8" -s bottom_skin_preshrink="0.8" -s raft_surface_line_spacing="0.4" -s wall_line_width="0.4" -s xy_offset="0" -s alternate_carve_order="True" -s travel_avoid_other_parts="True" -s raft_interface_speed="22.5" -s travel_avoid_distance="0.625" -s support_interface_height="1" -s jerk_travel_layer_0="30.0" -s date="29-02-2020" -s wireframe_flow="100" -s machine_acceleration="4000" -s machine_minimum_feedrate="0.0" -s skin_preshrink="0.8" -s jerk_wall="20" -s retract_at_layer_change="False" -s jerk_travel="30" -s support_skip_some_zags="False" -s minimum_roof_area="1.0" -s wireframe_flow_connection="100" -s bridge_skin_density="100" -s skirt_brim_line_width="0.4" -s top_bottom_pattern="lines" -s travel_compensate_overlapping_walls_0_enabled="True" -s flow_rate_max_extrusion_offset="0" -s material_diameter="2.85" -s support_bottom_line_width="0.4" -s raft_smoothing="5" -s speed_topbottom="30.0" -s wireframe_drag_along="0.6" -s material_break_speed="25" -s raft_interface_acceleration="3000" -s minimum_polygon_circumference="1.0" -s support_interface_skip_height="0.3" -s speed_print="60" -s skin_edge_support_layers="0" -s support_type="buildplate" -s support_roof_line_width="0.4" -s wireframe_printspeed_bottom="5" -s raft_surface_line_width="0.4" -s prime_tower_min_volume="6" -s prime_blob_enable="False" -s switch_extruder_prime_speed="20" -s wall_x_extruder_nr="-1" -s machine_steps_per_mm_z="50" -s smooth_spiralized_contours="True" -s ooze_shield_dist="2" -s bridge_wall_material_flow="50" -s cool_fan_full_layer="2" -s roofing_material_flow="100" -s wipe_hop_speed="10" -s infill_angles="[ ]" -s infill_line_distance="4.0" -s minimum_bottom_area="1.0" -s minimum_support_area="0.0" -s material_linear_advance_factor_wall_0="0" -s wall_0_wipe_dist="0.2" -s switch_extruder_extra_prime_amount="0" -s material_extrusion_cool_down_speed="0.7" -s wall_x_material_flow="100" -s support_xy_distance_overhang="0.2" -s wireframe_printspeed_up="5" -s resolution="0" -s retraction_hop="1" -s jerk_wall_0="20" -s skin_material_flow="100" -s support_bottom_density="100" -s jerk_support_interface="20" -s material_print_temperature_layer_0="210" -s retraction_min_travel="0.8" -s support_xy_overrides_z="z_overrides_xy" -s min_infill_area="0" -s machine_nozzle_tip_outer_diameter="1" -s machine_steps_per_mm_x="50" -s material_break_preparation_temperature="210" -s machine_nozzle_size="0.4" -s support_initial_layer_line_distance="2.6666666666666665" -s center_object="False" -s spaghetti_inset="0.2" -s mold_enabled="False" -s acceleration_travel="5000" -s acceleration_wall="3000" -s support_bottom_material_flow="100" -s ironing_enabled="False" -s cooling="0" -s support_infill_angles="[ ]" -s shell="0" -s bridge_skin_material_flow_2="100" -s speed_support_interface="40.0" -s meshfix="0" -s acceleration_skirt_brim="3000" -s support_line_distance="2.6666666666666665" -s retraction_enable="True" -s retraction_hop_enabled="False" -s switch_extruder_retraction_speed="20" -s acceleration_roofing="3000" -s anti_overhang_mesh="False" -s cool_min_layer_time_fan_speed_max="10" -s wipe_retraction_speed="25" -s retraction_amount="6.5" -s retraction_combing="all" -s material_flow_layer_0="100" -s wall_material_flow="100" -s extruder_prime_pos_z="0" -s support_tower_roof_angle="65" -s connect_skin_polygons="False" -s infill_pattern="grid" -s magic_fuzzy_skin_thickness="0.3" -s meshfix_extensive_stitching="False" -s infill_wipe_dist="0.1" -s skirt_brim_material_flow="100" -s bridge_skin_speed="15.0" -s mesh_position_x="0" -s prime_tower_position_y="175.6" -s jerk_wall_x="20" -s support_bottom_extruder_nr="0" -s support_roof_height="1.2" -s cutting_mesh="False" -s machine_max_jerk_xy="20.0" -s support_material_flow="100" -s bridge_fan_speed="100" -s support_line_width="0.4" -s ooze_shield_enabled="False" -s support_extruder_nr="0" -s wall_thickness="0.8" -s support_bottom_distance="0" -s material_crystallinity="False" -s machine_steps_per_mm_e="1600" -s dual="0" -s support_bottom_enable="False" -s wireframe_nozzle_clearance="1" -s speed_infill="60" -s machine_nozzle_id="unknown" -s wipe_brush_pos_x="100" -s acceleration_travel_layer_0="5000.0" -s meshfix_maximum_deviation="0.05" -s cool_fan_enabled="True" -s wall_overhang_angle="90" -s cool_fan_speed_max="100.0" -s raft_surface_layers="2" -s skirt_brim_minimal_length="250" -s material_linear_advance_factor="0" -s cool_min_layer_time="5" -s day="Sat" -s wipe_retraction_enable="True" -s travel_avoid_supports="False" -s acceleration_infill="3000" -s material_bed_temperature="64" -s bridge_skin_material_flow_3="110" -s bridge_fan_speed_2="0" -s initial_bottom_layers="8" -s support_interface_pattern="concentric" -s cross_infill_density_image="" -s adaptive_layer_height_variation="0.1" -s infill_wall_line_count="0" -s support_supported_skin_fan_speed="100" -s extruder_prime_pos_y="0" -s machine_name="Wanhao Duplicator i3 Plus" -s retraction_prime_speed="25" -s material_linear_advance_factor_prime_tower="0" -s z_seam_type="sharpest_corner" -s meshfix_keep_open_polygons="False" -s support_use_towers="True" -s infill_support_enabled="False" -s cool_fan_speed_0="0" -s support_brim_line_count="20" -s blackmagic="0" -s material_print_temp_wait="True" -s support_roof_angles="[ ]" -s infill_mesh_order="0" -s support="0" -s spaghetti_infill_enabled="False" -s acceleration_support="3000" -s support_interface_offset="0.0" -s support_tree_enable="False" -s acceleration_wall_0="3000" -s wireframe_top_jump="0.6" -s jerk_support_bottom="20" -s speed_support_bottom="40.0" -s support_conical_min_width="5.0" -s bottom_layers="8" -s material_flow_dependent_temperature="False" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s support_wall_count="0" -s machine_max_acceleration_z="100" -s skin_edge_support_thickness="0" -s coasting_min_volume="0.8" -s material_linear_advance_factor_wall="0" -s cool_fan_full_at_height="0.3" -s draft_shield_dist="10" -s layer_height="0.1" -s material_break_preparation_retracted_position="-16" -s infill_mesh="False" -s mold_angle="40" -s raft_speed="30.0" -s machine_max_jerk_z="0.4" -s support_tree_angle="40" -s wall_line_width_0="0.4" -s cross_infill_pocket_size="4.0" -s machine_max_jerk_e="5.0" -s raft_margin="15" -s raft_surface_speed="30.0" -s infill_enable_travel_optimization="False" -s machine_height="180" -s travel_retract_before_outer_wall="False" -s infill_support_angle="40" -s adaptive_layer_height_variation_step="0.01" -s raft_surface_jerk="20" -s bridge_sparse_infill_max_density="0" -s wireframe_printspeed_flat="5" -s draft_shield_height_limitation="full" -s magic_fuzzy_skin_enabled="False" -s jerk_enabled="False" -s support_mesh_drop_down="True" -s wireframe_roof_fall_down="2" -s wireframe_strategy="compensate" -s machine_gcode_flavor="RepRap (Marlin/Sprinter)" -s conical_overhang_angle="50" -s infill_overlap_mm="0.04" -s mesh_position_z="0" -s travel_speed="120" -s speed="0" -s small_hole_max_size="0" -s material_bed_temp_prepend="True" -s material="0" -s infill_before_walls="True" -s meshfix_maximum_resolution="0.5" -s wipe_repeat_count="5" -s support_tree_branch_distance="1" -s retraction_speed="25" -s gradual_infill_steps="0" -s machine_show_variants="False" -s support_interface_material_flow="100" -s infill_overlap="10" -s jerk_support="20" -s wall_line_width_x="0.4" -s roofing_extruder_nr="-1" -s raft_base_acceleration="3000" -s wall_extruder_nr="-1" -s adaptive_layer_height_threshold="0.2" -s min_skin_width_for_expansion="4.898587196589413e-17" -s material_no_load_move_factor="0.940860215" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s max_skin_angle_for_expansion="90" -s sub_div_rad_add="0.4" -s support_tree_branch_diameter_angle="5" -s top_bottom_pattern_0="lines" -s alternate_extra_perimeter="False" -s support_roof_enable="True" -s bridge_wall_coast="100" -s raft_interface_fan_speed="0" -s support_offset="0" -s wireframe_fall_down="0.5" -s material_flow="100" -s cross_support_density_image="" -s wireframe_height="3" -s z_seam_relative="False" -s support_tower_maximum_supported_diameter="3.0" -s support_interface_extruder_nr="0" -s nozzle_disallowed_areas="[]" -s support_xy_distance="0.7" -s speed_wall="30.0" -s bridge_enable_more_layers="True" -s conical_overhang_enabled="False" -s speed_travel_layer_0="60.0" -s draft_shield_height="10" -s z_seam_x="100.0" -s retraction_combing_max_distance="0" -s support_infill_rate="15" -s spaghetti_max_infill_angle="10" -s acceleration_support_interface="3000" -s machine_feeder_wheel_diameter="10.0" -s retraction_hop_only_when_collides="False" -s extruder_prime_pos_x="0" -s build_volume_temperature="28" -s layer_start_y="0.0" -s material_break_retracted_position="-50" -s material_initial_print_temperature="200" -s support_infill_extruder_nr="0" -s coasting_speed="90" -s carve_multiple_volumes="False" -s flow_rate_extrusion_offset_factor="100" -s acceleration_wall_x="3000" -s skin_overlap_mm="0.02" -s small_feature_max_length="0.0" -s wall_0_extruder_nr="-1" -s material_maximum_park_duration="300" -s machine_nozzle_temp_enabled="True" -s switch_extruder_retraction_amount="16" -s skirt_brim_speed="30.0" -s wipe_retraction_extra_prime_amount="0" -s ironing_only_highest_layer="False" -s acceleration_topbottom="3000" -s machine_settings="0" -s adhesion_extruder_nr="0" -s mold_width="5" -s jerk_support_infill="20" -s wall_overhang_speed_factor="100" -s jerk_prime_tower="20" -s skin_outline_count="1" -s bridge_skin_speed_2="15.0" -s machine_max_feedrate_y="299792458000" -s support_roof_material_flow="100" -s bridge_skin_density_2="75" -s support_tower_diameter="3.0" -s material_linear_advance_factor_support="0" -s command_line_settings="0" -s brim_replaces_support="True" -s prime_tower_wipe_enabled="True" -s fill_perimeter_gaps="everywhere" -s skin_overlap="5" -s print_sequence="all_at_once" -s acceleration_support_infill="3000" -s brim_gap="0" -s spaghetti_infill_extra_volume="0" -s support_connect_zigzags="True" -s adaptive_layer_height_enabled="False" -s travel_compensate_overlapping_walls_enabled="True" -s roofing_pattern="lines" -s fill_outline_gaps="False" -s support_zag_skip_count="8" -s machine_filament_park_distance="16" -s acceleration_print="3000" -s material_linear_advance_factor_wall_x="0" -s material_final_print_temperature="195" -s ooze_shield_angle="60" -s machine_endstop_positive_direction_x="False" -s travel_compensate_overlapping_walls_x_enabled="True" -s coasting_volume="0.064" -s machine_endstop_positive_direction_z="True" -s small_feature_speed_factor_0="50" -s machine_shape="rectangular" -s machine_heated_bed="True" -s machine_use_extruder_offset_to_offset_coords="True" -s brim_outside_only="True" -s material_standby_temperature="150" -s support_bottom_stair_step_height="0.3" -s speed_roofing="30.0" -s roofing_line_width="0.4" -s material_print_temp_prepend="True" -s wireframe_printspeed_down="5" -s minimum_interface_area="1.0" -s draft_shield_enabled="False" -s speed_support="60" -s adhesion_z_offset="0" -s wireframe_roof_outer_delay="0.2" -s ironing_inset="0.2" -s bridge_fan_speed_3="0" -s initial_layer_line_width_factor="100.0" -s machine_start_gcode="" -s experimental="0" -s bridge_wall_min_length="5" -s prime_tower_position_x="195.6" -s wipe_retraction_amount="6.5" -s material_break_temperature="50" -s top_bottom_extruder_nr="-1" -s acceleration_support_roof="3000" -s support_roof_offset="0.0" -s wall_0_material_flow="100" -s wireframe_flow_flat="100" -s speed_print_layer_0="30.0" -s default_material_bed_temperature="60" -s raft_jerk="20" -s machine_end_gcode="" -s machine_center_is_zero="False" -s support_conical_enabled="False" -s material_anti_ooze_retraction_speed="5" -s machine_head_with_fans_polygon="[[-20, 10], [10, 10], [10, -10], [10, -10]]" -s z_seam_corner="z_seam_corner_inner" -s support_interface_angles="[ ]" -s bottom_thickness="0.8" -s raft_interface_line_spacing="1.0" -s material_flush_purge_length="60" -s machine_nozzle_heat_up_speed="2.0" -s cool_fan_speed_min="100.0" -s wipe_move_distance="20" -s bridge_skin_speed_3="15.0" -s magic_fuzzy_skin_point_dist="0.8" -s filter_out_tiny_gaps="True" -s spaghetti_flow="20" -s machine_heated_build_volume="False" -s extruder_prime_pos_abs="False" -s material_adhesion_tendency="10" -s infill_sparse_thickness="0.1" -s speed_wall_0="30.0" -s machine_extruders_share_heater="False" -s cool_lift_head="False" -s zig_zaggify_infill="False" -s acceleration_enabled="False" -s support_roof_extruder_nr="0" -s layer_start_x="0.0" -s machine_min_cool_heat_time_window="50.0" -s multiple_mesh_overlap="0.15" -s wipe_retraction_retract_speed="25" -s support_bottom_pattern="concentric" -s material_break_preparation_speed="2" -s acceleration_support_bottom="3000" -s material_end_of_filament_purge_length="20" -s wireframe_roof_drag_along="0.8" -s support_bottom_line_distance="0.4" -s wall_min_flow="0" -s ironing_flow="10.0" -s acceleration_prime_tower="3000" -s retraction_hop_after_extruder_switch_height="1" -s skirt_gap="3" -s speed_ironing="20.0" -s machine_max_acceleration_e="10000" -s line_width="0.4" -s zig_zaggify_support="False" -s wipe_hop_enable="False" -s optimize_wall_printing_order="False" -s raft_interface_line_width="0.8" -s gantry_height="180" -s material_surface_energy="100" -s print_bed_temperature="64" -s magic_mesh_surface_mode="normal" -s raft_fan_speed="0" -s wireframe_up_half_speed="0.3" -s machine_max_feedrate_e="299792458000" -s spaghetti_infill_stepped="True" -s raft_surface_fan_speed="0" -s meshfix_union_all_remove_holes="False" -s speed_wall_x="60.0" -s raft_base_jerk="20" -s machine_extruder_count="1" -s jerk_support_roof="20" -s wireframe_top_delay="0" -s machine_endstop_positive_direction_y="False" -s jerk_topbottom="20" -s remove_empty_first_layers="True" -s support_bottom_height="1" -s raft_acceleration="3000" -s jerk_print_layer_0="20" -s wireframe_roof_inset="3" -s material_anti_ooze_retracted_position="-4" -s expand_skins_expand_distance="0.8" -s bridge_wall_speed="15.0" -s support_bottom_offset="0.0" -s wireframe_flat_delay="0.1" -s machine_nozzle_expansion_angle="45" -s brim_line_count="20" -s support_roof_line_distance="0.4" -s prime_tower_line_width="0.4" -s infill_line_width="0.4" -s magic_fuzzy_skin_outside_only="False" -s speed_equalize_flow_max="150" -s jerk_roofing="20" -s raft_base_line_width="0.8" -s coasting_enable="False" -s support_interface_line_width="0.4" -s support_bottom_angles="[ ]" -s support_skip_zag_per_mm="20" -s support_extruder_nr_layer_0="0" -s meshfix_maximum_travel_resolution="0.8" -s cool_min_speed="10" -s machine_disallowed_areas="[]" -s support_interface_enable="False" -s bridge_skin_density_3="80" -s machine_max_feedrate_z="299792458000" -s support_roof_density="100" -s spaghetti_max_height="2.0" -s skirt_line_count="4" -s retraction_count_max="90" -s retraction_extrusion_window="6.5" -s support_fan_enable="False" -s support_roof_pattern="concentric" -s support_mesh="False" -s wireframe_straight_before_down="20" -s material_print_temperature="210" -s retraction_extra_prime_amount="0" -s wireframe_printspeed="5" -s machine_steps_per_mm_y="50" -s support_tree_branch_diameter="2" -s speed_slowdown_layers="2" -s default_material_print_temperature="210" -s roofing_layer_count="0" -s relative_extrusion="False" -s wall_0_inset="0" -s brim_width="8.0" -s speed_support_infill="60" -s raft_base_line_spacing="1.6" -s max_extrusion_before_wipe="10" -s ironing_pattern="zigzag" -s speed_travel="120" -s support_angle="70" -s raft_base_speed="22.5" -s layer_0_z_overlap="0.15" -s speed_z_hop="10" -s platform_adhesion="0" -s support_bottom_stair_step_width="5.0" -s raft_interface_jerk="20" -s material_shrinkage_percentage="0" -s ironing_line_spacing="0.1" -s skin_line_width="0.4" -s connect_infill_polygons="False" -s wireframe_bottom_delay="0" -s mesh_position_y="0" -s infill_randomize_start_location="False" -s machine_nozzle_head_distance="3" -s support_brim_width="8.0" -s top_layers="8" -s support_infill_sparse_thickness="0.1" -s material_bed_temperature_layer_0="64" -s clean_between_layers="False" -s travel="0" -s material_bed_temp_wait="True" -s raft_airgap="0.3" -s material_flush_purge_speed="0.5" -s support_enable="False" -s prime_tower_enable="False" -s raft_surface_thickness="0.1" -s jerk_skirt_brim="20" -s machine_heat_zone_length="16" -s gradual_infill_step_height="1.5" -s outer_inset_first="False" -s prime_tower_brim_enable="False" -s top_skin_preshrink="0.8" -s top_skin_expand_distance="0.8" -s jerk_print="20" -s mold_roof_height="0.5" -s jerk_ironing="20" -s roofing_angles="[ ]" -s support_top_distance="0.1" -s retraction_hop_after_extruder_switch="True" -s material_linear_advance_factor_skirt_brim="0" -s layer_height_0="0.3" -s switch_extruder_retraction_speeds="20" -s machine_firmware_retract="False" -s meshfix_union_all="True" -s support_z_distance="0.1" -s bridge_settings_enabled="False" -s z_seam_y="200" -s acceleration_layer_0="3000" -s raft_interface_thickness="0.15000000000000002" -s wall_line_count="2" -s magic_fuzzy_skin_point_density="1.25" -s top_bottom_thickness="0.8" -s machine_width="200" -s prime_tower_flow="100" -s acceleration_ironing="3000" -s raft_base_fan_speed="0" -s support_tree_collision_resolution="0.2" -s skin_no_small_gaps_heuristic="False" -s wipe_hop_amount="1" -s support_join_distance="2.0" -s machine_buildplate_type="glass" -s time="14:05:51" -s infill_material_flow="100" -s wireframe_enabled="False" -s material_linear_advance_factor_topbottom="0" -s wipe_retraction_prime_speed="25" -s wipe_pause="0" -s bridge_skin_support_threshold="50" -e0 -s switch_extruder_retraction_speeds="20" -s support_interface_density="100" -s cool_fan_speed="80" -s raft_base_thickness="0.36" -s machine_nozzle_offset_x="0" -s initial_layer_line_width_factor="100.0" -s bridge_skin_material_flow="60" -s material_end_of_filament_purge_speed="0.5" -s retraction_retract_speed="65" -s speed_layer_0="12" -s infill="0" -s small_feature_speed_factor="50" -s support_infill_sparse_thickness="0.1" -s speed_prime_tower="60" -s support_brim_enable="False" -s infill_multiplier="1" -s gradual_support_infill_steps="0" -s infill_sparse_density="20" -s bottom_skin_expand_distance="1.6" -s machine_nozzle_cool_down_speed="2.0" -s infill_offset_x="0" -s limit_support_retractions="True" -s machine_extruder_end_pos_x="0" -s infill_offset_y="0" -s acceleration_print_layer_0="3000" -s wall_min_flow_retract="False" -s speed_support_roof="40.0" -s xy_offset_layer_0="0" -s z_seam_position="back" -s material_guid="0ff92885-617b-4144-a03c-9989872454bc" -s material_linear_advance_factor_support_interface="0" -s material_linear_advance_factor_infill="0" -s material_break_preparation_speed="2" -s acceleration_support_bottom="3000" -s material_end_of_filament_purge_length="20" -s gradual_support_infill_step_height="1" -s support_conical_angle="30" -s raft_surface_acceleration="3000" -s support_roof_pattern="concentric" -s jerk_layer_0="20" -s support_pattern="lines" -s jerk_infill="20" -s speed_equalize_flow_enabled="False" -s top_thickness="0.8" -s bottom_skin_preshrink="1.6" -s raft_surface_line_spacing="0.4" -s skin_edge_support_layers="0" -s wall_line_width="0.4" -s xy_offset="0" -s travel_avoid_other_parts="True" -s raft_interface_speed="22.5" -s travel_avoid_distance="0.625" -s support_interface_height="1" -s wipe_move_distance="20" -s cool_fan_speed_min="80" -s acceleration_skirt_brim="3000" -s meshfix="0" -s support_bottom_material_flow="100" -s acceleration_wall="3000" -s ironing_enabled="False" -s acceleration_travel="5000" -s support_supported_skin_fan_speed="100" -s infill_wall_line_count="0" -s support_wall_count="0" -s skin_edge_support_thickness="0" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s experimental="0" -s support_skip_some_zags="False" -s travel_compensate_overlapping_walls_0_enabled="True" -s support_bottom_line_width="0.4" -s material_flow="100" -s support_offset="0" -s raft_smoothing="5" -s speed_topbottom="30.0" -s wipe_hop_enable="False" -s zig_zaggify_support="False" -s speed_print="60" -s prime_tower_min_volume="6" -s jerk_travel="30" -s material_linear_advance_factor_skirt_brim="0" -s support_tree_branch_diameter="2" -s machine_steps_per_mm_y="50" -s acceleration_support_interface="3000" -s spaghetti_max_infill_angle="10" -s bridge_wall_material_flow="50" -s wipe_hop_speed="10" -s jerk_wall_0="20" -s retraction_hop="1" -s wipe_pause="0" -s wipe_retraction_prime_speed="65" -s minimum_support_area="0.0" -s material_linear_advance_factor_wall_0="0" -s wall_0_wipe_dist="0.2" -s switch_extruder_extra_prime_amount="0" -s support_tower_maximum_supported_diameter="3.0" -s spaghetti_infill_extra_volume="0" -s support_connect_zigzags="True" -s support_xy_distance_overhang="0.2" -s bridge_skin_density_3="80" -s support_interface_enable="False" -s resolution="0" -s support_line_width="0.4" -s material_break_preparation_retracted_position="-16" -s support_xy_overrides_z="z_overrides_xy" -s min_infill_area="0" -s machine_nozzle_tip_outer_diameter="1" -s machine_steps_per_mm_x="50" -s infill_angles="[ ]" -s minimum_interface_area="1.0" -s skirt_brim_line_width="0.4" -s top_bottom_pattern="lines" -s cool_fan_full_layer="2" -s center_object="False" -s spaghetti_inset="0.2" -s gradual_infill_steps="0" -s jerk_travel_layer_0="30.0" -s mold_enabled="False" -s raft_surface_line_width="0.4" -s cooling="0" -s support_tree_collision_resolution="0.2" -s raft_base_fan_speed="0" -s material_print_temperature_layer_0="220" -s raft_interface_line_spacing="1.0" -s machine_nozzle_heat_up_speed="2.0" -s material_flush_purge_length="60" -s bridge_skin_material_flow_2="100" -s speed_support_interface="40.0" -s support_interface_offset="0.0" -s jerk_support="20" -s wall_line_width_x="0.4" -s support_line_distance="2.6666666666666665" -s retraction_enable="True" -s switch_extruder_retraction_speed="20" -s retraction_hop_enabled="False" -s acceleration_roofing="3000" -s cool_min_layer_time_fan_speed_max="10" -s wipe_retraction_speed="65" -s retraction_amount="2.5" -s raft_speed="30.0" -s mold_angle="40" -s material_flow_layer_0="100" -s wall_material_flow="100" -s bridge_skin_material_flow_3="110" -s bridge_fan_speed_2="0" -s initial_bottom_layers="6" -s support_interface_pattern="concentric" -s connect_skin_polygons="False" -s infill_pattern="concentric" -s material_flow_dependent_temperature="False" -s bottom_layers="6" -s magic_fuzzy_skin_thickness="0.3" -s meshfix_extensive_stitching="False" -s infill_wipe_dist="0.1" -s machine_extruder_start_pos_abs="False" -s skirt_brim_material_flow="100" -s bridge_skin_speed="15.0" -s jerk_wall_x="20" -s wipe_retraction_amount="2.5" -s material_break_temperature="50" -s support_roof_height="1.2" -s magic_fuzzy_skin_enabled="False" -s connect_infill_polygons="False" -s machine_extruder_start_code="" -s support_material_flow="100" -s bridge_fan_speed="100" -s bridge_sparse_infill_max_density="0" -s wall_thickness="0.8" -s support_bottom_distance="0" -s material_crystallinity="False" -s machine_steps_per_mm_e="1600" -s jerk_wall="20" -s dual="0" -s support_bottom_enable="False" -s skin_overlap="5" -s speed_infill="60" -s machine_nozzle_id="unknown" -s wipe_brush_pos_x="100" -s acceleration_travel_layer_0="5000.0" -s raft_surface_layers="2" -s skirt_brim_minimal_length="250" -s material_linear_advance_factor="0" -s cool_min_layer_time="5" -s wipe_retraction_enable="True" -s travel_avoid_supports="False" -s acceleration_infill="3000" -s speed_ironing="20.0" -s support_roof_line_width="0.4" -s extruder_prime_pos_y="0" -s material_linear_advance_factor_prime_tower="0" -s retraction_prime_speed="65" -s z_seam_type="random" -s prime_blob_enable="False" -s meshfix_keep_open_polygons="False" -s raft_surface_speed="30.0" -s infill_enable_travel_optimization="False" -s machine_nozzle_temp_enabled="True" -s switch_extruder_retraction_amount="16" -s skirt_brim_speed="12" -s material_maximum_park_duration="300" -s infill_material_flow="100" -s support_use_towers="True" -s infill_support_enabled="False" -s cool_fan_speed_0="0" -s support_brim_line_count="20" -s blackmagic="0" -s multiple_mesh_overlap="0.15" -s wipe_retraction_retract_speed="65" -s material_linear_advance_factor_wall_x="0" -s acceleration_print="3000" -s support_bottom_pattern="concentric" -s meshfix_maximum_deviation="0.05" -s cool_fan_enabled="True" -s wall_overhang_angle="90" -s cool_fan_speed_max="80" -s machine_extruder_end_code="" -s support_roof_angles="[ ]" -s retraction_hop_after_extruder_switch_height="1" -s machine_extruder_end_pos_abs="False" -s support="0" -s spaghetti_infill_enabled="False" -s acceleration_support="3000" -s acceleration_wall_0="3000" -s jerk_support_bottom="20" -s material_extrusion_cool_down_speed="0.7" -s speed_support_bottom="40.0" -s support_conical_min_width="5.0" -s coasting_min_volume="0.8" -s material_linear_advance_factor_wall="0" -s cool_fan_full_at_height="0.3" -s support_infill_angles="[ ]" -s shell="0" -s support_tower_diameter="3.0" -s machine_extruder_start_pos_x="0" -s wipe_hop_amount="1" -s support_join_distance="2.0" -s support_tree_angle="40" -s fill_perimeter_gaps="everywhere" -s prime_tower_wipe_enabled="True" -s machine_heat_zone_length="16" -s jerk_skirt_brim="20" -s raft_jerk="20" -s speed_print_layer_0="12" -s command_line_settings="0" -s material_linear_advance_factor_support="0" -s conical_overhang_angle="50" -s infill_overlap_mm="0" -s mesh_position_z="0" -s speed="0" -s material_diameter="1.75" -s meshfix_union_all_remove_holes="False" -s gradual_infill_step_height="1.5" -s cool_lift_head="False" -s speed_wall_0="30.0" -s outer_inset_first="False" -s extruder_prime_pos_z="0" -s support_tower_roof_angle="65" -s meshfix_maximum_resolution="0.5" -s wipe_repeat_count="5" -s support_tree_branch_distance="1" -s wall_x_material_flow="100" -s min_skin_width_for_expansion="3.67394039744206e-17" -s material_no_load_move_factor="0.940860215" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s max_skin_angle_for_expansion="90" -s top_bottom_pattern_0="lines" -s alternate_extra_perimeter="False" -s support_roof_enable="True" -s slicing_tolerance="exclusive" -s machine_extruder_end_pos_y="0" -s cross_support_density_image="" -s z_seam_relative="False" -s support_xy_distance="0.7" -s speed_wall="30.0" -s material_final_print_temperature="205" -s machine_endstop_positive_direction_x="False" -s bridge_enable_more_layers="True" -s conical_overhang_enabled="False" -s speed_travel_layer_0="30.0" -s fill_outline_gaps="False" -s machine_filament_park_distance="16" -s support_zag_skip_count="8" -s material_break_retracted_position="-50" -s material_initial_print_temperature="210" -s switch_extruder_prime_speed="20" -s extruder_prime_pos_x="0" -s layer_start_y="0.0" -s filter_out_tiny_gaps="True" -s bridge_skin_speed_3="15.0" -s spaghetti_flow="20" -s magic_fuzzy_skin_point_dist="0.8" -s coasting_speed="90" -s skin_material_flow="100" -s support_bottom_density="100" -s acceleration_wall_x="3000" -s skin_overlap_mm="0.02" -s small_feature_max_length="0.0" -s support_initial_layer_line_distance="2.6666666666666665" -s support_bottom_offset="0.0" -s bridge_wall_speed="15.0" -s meshfix_union_all="True" -s support_z_distance="0.1" -s infill_line_distance="2.0" -s minimum_bottom_area="1.0" -s retraction_combing_max_distance="0" -s z_seam_x="100.0" -s expand_skins_expand_distance="1.6" -s mesh_position_x="0" -s wipe_retraction_extra_prime_amount="0" -s jerk_support_roof="20" -s machine_endstop_positive_direction_y="False" -s coasting_volume="0.064" -s machine_endstop_positive_direction_z="True" -s small_feature_speed_factor_0="50" -s infill_support_angle="40" -s raft_surface_jerk="20" -s support_interface_skip_height="0.3" -s mold_width="5" -s infill_before_walls="True" -s material="0" -s jerk_support_infill="20" -s wall_overhang_speed_factor="100" -s jerk_prime_tower="20" -s skin_outline_count="1" -s material_anti_ooze_retraction_speed="5" -s support_conical_enabled="False" -s bridge_skin_speed_2="15.0" -s retract_at_layer_change="False" -s raft_base_jerk="20" -s speed_wall_x="60.0" -s support_roof_material_flow="100" -s bridge_skin_density_2="75" -s brim_replaces_support="True" -s acceleration_support_infill="3000" -s brim_gap="0" -s travel_compensate_overlapping_walls_enabled="True" -s roofing_pattern="lines" -s travel_compensate_overlapping_walls_x_enabled="True" -s wall_line_width_0="0.4" -s cross_infill_pocket_size="2.0" -s raft_margin="15" -s support_bottom_stair_step_height="0.3" -s brim_outside_only="True" -s material_standby_temperature="175" -s speed_roofing="30.0" -s roofing_line_width="0.4" -s speed_support="60" -s ironing_inset="0.2" -s bridge_fan_speed_3="0" -s support_tree_branch_diameter_angle="5" -s support_infill_rate="15" -s infill_randomize_start_location="False" -s mesh_position_y="0" -s wall_line_count="4" -s magic_fuzzy_skin_point_density="1.25" -s platform_adhesion="0" -s support_bottom_stair_step_width="5.0" -s speed_z_hop="10" -s retraction_speed="65" -s wall_0_material_flow="100" -s cool_min_speed="10" -s bridge_skin_density="100" -s raft_base_line_width="0.8" -s machine_nozzle_offset_y="0" -s extruder_nr="0" -s infill_overlap="14" -s support_interface_material_flow="100" -s magic_mesh_surface_mode="normal" -s raft_fan_speed="0" -s raft_interface_line_width="0.8" -s material_surface_energy="100" -s retraction_extrusion_window="2.5" -s support_fan_enable="False" -s machine_extruder_start_pos_y="0" -s extruder_prime_pos_abs="False" -s material_adhesion_tendency="0" -s infill_sparse_thickness="0.1" -s skin_no_small_gaps_heuristic="False" -s machine_nozzle_head_distance="3" -s support_brim_width="8.0" -s top_layers="6" -s material_break_preparation_temperature="220" -s layer_start_x="0.0" -s machine_min_cool_heat_time_window="50.0" -s support_bottom_line_distance="0.4" -s zig_zaggify_infill="False" -s wall_min_flow="0" -s ironing_flow="10.0" -s support_roof_offset="0.0" -s acceleration_support_roof="3000" -s acceleration_prime_tower="3000" -s skirt_gap="3" -s line_width="0.4" -s optimize_wall_printing_order="False" -s raft_acceleration="3000" -s support_bottom_height="1" -s raft_base_acceleration="3000" -s skirt_line_count="4" -s retraction_count_max="90" -s ironing_only_highest_layer="False" -s acceleration_topbottom="3000" -s machine_settings="0" -s small_hole_max_size="0" -s brim_line_count="20" -s support_roof_line_distance="0.4" -s infill_line_width="0.4" -s magic_fuzzy_skin_outside_only="False" -s prime_tower_line_width="0.4" -s jerk_print_layer_0="20" -s material_anti_ooze_retracted_position="-4" -s support_interface_angles="[ ]" -s bottom_thickness="0.8" -s speed_equalize_flow_max="150" -s jerk_roofing="20" -s minimum_roof_area="1.0" -s machine_extruder_cooling_fan_number="0" -s machine_nozzle_size="0.4" -s raft_interface_jerk="20" -s material_shrinkage_percentage="0" -s support_roof_density="100" -s spaghetti_max_height="2.0" -s bridge_skin_support_threshold="50" -s material_linear_advance_factor_topbottom="0" -s material_print_temperature="220" -s retraction_extra_prime_amount="0" -s default_material_print_temperature="200" -s roofing_layer_count="0" -s wall_0_inset="0" -s brim_width="8.0" -s speed_support_infill="60" -s raft_base_line_spacing="1.6" -s max_extrusion_before_wipe="10" -s roofing_material_flow="100" -s prime_tower_flow="100" -s acceleration_ironing="3000" -s raft_interface_acceleration="3000" -s spaghetti_infill_stepped="True" -s raft_surface_fan_speed="0" -s jerk_print="20" -s z_seam_y="200" -s retraction_min_travel="0.8" -s acceleration_layer_0="3000" -s material_break_speed="25" -s ironing_line_spacing="0.1" -s raft_airgap="0.3" -s material_flush_purge_speed="0.5" -s skin_line_width="0.4" -s machine_steps_per_mm_z="50" -s skin_angles="[ ]" -s skin_preshrink="1.6" -s clean_between_layers="False" -s travel="0" -s raft_surface_thickness="0.1" -s top_skin_preshrink="1.6" -s jerk_support_interface="20" -s cross_infill_density_image="" -s support_interface_line_width="0.4" -s support_skip_zag_per_mm="20" -s support_bottom_angles="[ ]" -s ironing_pattern="zigzag" -s speed_travel="150" -s support_angle="70" -s raft_base_speed="22.5" -s layer_0_z_overlap="0.15" -s top_skin_expand_distance="1.6" -s sub_div_rad_add="0.4" -s z_seam_corner="z_seam_corner_inner" -s roofing_angles="[ ]" -s jerk_ironing="20" -s top_bottom_thickness="0.8" -s support_top_distance="0.1" -s retraction_hop_after_extruder_switch="True" -s jerk_topbottom="20" -s bridge_wall_coast="100" -s raft_interface_fan_speed="0" -s raft_interface_thickness="0.15000000000000002" -s meshfix_maximum_travel_resolution="0.8" -s machine_feeder_wheel_diameter="10.0" -s retraction_hop_only_when_collides="False" -s coasting_enable="False" -s mold_roof_height="0.5" -g -e0 -l "0" -s extruder_nr="0"
2020-02-29 14:05:52,540 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 43 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-02-29 14:05:52,685 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 14:05:52,688 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 14:05:52,693 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [663]: Slicing took 1.5165119171142578 seconds
2020-02-29 14:05:52,693 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [664]: Number of models per buildplate: {0: 1}
2020-02-29 14:05:52,694 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [678]: See if there is more to slice...
2020-02-29 14:05:52,919 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [181]: Socket state changed to Closing
2020-02-29 14:05:52,922 - DEBUG - [MainThread] UM.Backend.Backend._onSocketError [203]: Socket debug: Arcus Error (13): Closing socket because other side requested close.
2020-02-29 14:05:52,925 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [183]: Socket state changed to Closed
2020-02-29 14:05:52,925 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onBackendQuit [829]: Backend quit with return code 0. Resetting process and socket.
2020-02-29 14:05:54,739 - DEBUG - [MainThread] LinearAdvanceSettingPlugin.LinearAdvanceSettingPlugin._filterGcode [109]: No used extruders specify a linear advance factor
2020-02-29 14:05:54,946 - DEBUG - [MainThread] UM.Controller.setActiveStage [149]: Setting active stage to MonitorStage
2020-02-29 14:05:54,993 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:211: Error: Cannot assign [undefined] to QString
2020-02-29 14:05:55,012 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._processRequest [308]: Request [8e0e887207c14d059162fc6f0fb93074] started
2020-02-29 14:05:55,015 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-02-29 14:05:55,396 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-02-29 14:05:55,418 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestFinished [369]: Request [8e0e887207c14d059162fc6f0fb93074] finished.
2020-02-29 14:05:55,421 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-02-29 14:05:55,422 - INFO - [MainThread] SliceInfoPlugin.SliceInfo._onRequestFinished [275]: SliceInfo sent successfully
2020-02-29 14:06:05,307 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-02-29 14:06:25,301 - DEBUG - [MainThread] UM.Message._onInactivityTriggered [88]: Hiding message because of inactivity
2020-02-29 14:06:32,165 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [772]: Resource created on OctoPrint instance: http://192.168.2.162/api/files/local/WDI3P_screw_sorter.gcode
2020-02-29 14:07:02,302 - DEBUG - [MainThread] UM.Message._onInactivityTriggered [88]: Hiding message because of inactivity
2020-02-29 14:33:13,818 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Blue Leader"._octoprint._tcp.local
2020-02-29 14:33:13,819 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Darth Pooky"._octoprint._tcp.local
2020-02-29 15:04:47,864 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 408
2020-02-29 15:48:34,933 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Orange Leader"._octoprint._tcp.local
2020-02-29 15:48:34,935 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Darth Pooky"._octoprint._tcp.local
2020-02-29 16:52:57,634 - DEBUG - [MainThread] UM.Controller.setActiveStage [149]: Setting active stage to PrepareStage
2020-02-29 16:52:57,682 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-02-29 16:52:57,762 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 16:52:57,766 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 16:52:57,775 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/plugins/plugins/PrepareStage/PrepareMain.qml:16:5: QML ActionPanelWidget: Binding loop detected for property "width"
2020-02-29 16:52:57,797 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:79: ReferenceError: stop is not defined
2020-02-29 16:52:57,801 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:63: TypeError: Cannot read property of null
2020-02-29 16:52:57,804 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:91: TypeError: Cannot read property of null
2020-02-29 16:52:57,806 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:102: TypeError: Cannot read property of null
2020-02-29 16:52:57,808 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:103: TypeError: Cannot read property of null
2020-02-29 16:52:57,811 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:139: TypeError: Cannot read property of null
2020-02-29 16:52:57,813 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:140: TypeError: Cannot read property of null
2020-02-29 16:52:57,816 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:120: TypeError: Cannot read property of null
2020-02-29 16:52:57,818 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:122: TypeError: Cannot read property of null
2020-02-29 16:52:57,821 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-02-29 16:52:57,874 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:36: TypeError: Cannot read property of null
2020-02-29 16:52:57,878 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:37: TypeError: Cannot read property of null
2020-02-29 16:52:57,881 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:49: TypeError: Cannot read property of null
2020-02-29 16:52:57,884 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:59: TypeError: Cannot read property of null
2020-02-29 16:52:57,886 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:61: TypeError: Cannot read property of null
2020-02-29 16:52:57,889 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:63: TypeError: Cannot read property of null
2020-02-29 16:52:57,893 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ExtruderBox.qml:20: TypeError: Cannot read property of null
2020-02-29 16:52:57,896 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:29: TypeError: Cannot read property of null
2020-02-29 16:52:57,898 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:30: TypeError: Cannot read property of null
2020-02-29 16:52:57,901 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:40: TypeError: Cannot read property of null
2020-02-29 16:52:57,903 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:73: TypeError: Cannot read property of null
2020-02-29 16:52:57,906 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:135: TypeError: Cannot read property of null
2020-02-29 16:52:57,909 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:246: TypeError: Cannot read property of null
2020-02-29 16:52:57,911 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:247: TypeError: Cannot read property of null
2020-02-29 16:52:57,914 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:173: TypeError: Cannot read property of null
2020-02-29 16:52:57,916 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:175: TypeError: Cannot read property of null
2020-02-29 16:52:57,919 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:190: TypeError: Cannot read property of null
2020-02-29 16:52:57,921 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:193: TypeError: Cannot read property of null
2020-02-29 16:52:57,925 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:60: TypeError: Cannot read property of null
2020-02-29 16:52:57,928 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:248: TypeError: Cannot read property of null
2020-02-29 16:52:57,930 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:294: TypeError: Cannot read property of null
2020-02-29 16:52:57,933 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:26: TypeError: Cannot read property of null
2020-02-29 16:52:57,935 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:27: TypeError: Cannot read property of null
2020-02-29 16:52:57,940 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:388: TypeError: Cannot read property of null
2020-02-29 16:52:57,943 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:390: TypeError: Cannot read property of null
2020-02-29 16:52:57,945 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:391: TypeError: Cannot read property of null
2020-02-29 16:52:57,948 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:26: TypeError: Cannot read property of null
2020-02-29 16:52:57,951 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:27: TypeError: Cannot read property of null
2020-02-29 16:52:57,954 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:24: TypeError: Cannot read property of null
2020-02-29 16:52:57,957 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:30: TypeError: Cannot read property of null
2020-02-29 16:52:57,960 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:39: TypeError: Cannot read property of null
2020-02-29 16:52:57,963 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:24: TypeError: Cannot read property of null
2020-02-29 16:52:57,965 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:30: TypeError: Cannot read property of null
2020-02-29 16:52:57,968 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:39: TypeError: Cannot read property of null
2020-02-29 16:52:57,970 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:24: TypeError: Cannot read property of null
2020-02-29 16:52:57,972 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:30: TypeError: Cannot read property of null
2020-02-29 16:52:57,975 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:39: TypeError: Cannot read property of null
2020-02-29 16:52:57,977 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupTooltip.qml:67: TypeError: Cannot read property of null
2020-02-29 16:52:57,979 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupTooltip.qml:69: TypeError: Cannot read property of null
2020-02-29 16:52:57,982 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupTooltip.qml:71: TypeError: Cannot read property of null
2020-02-29 16:52:57,985 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:150: TypeError: Cannot read property of null
2020-02-29 16:52:57,988 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-02-29 16:52:57,990 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:166: TypeError: Cannot read property of null
2020-02-29 16:52:57,992 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:167: TypeError: Cannot read property of null
2020-02-29 16:52:57,995 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:178: TypeError: Cannot read property of null
2020-02-29 16:52:57,998 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:231: TypeError: Cannot read property of null
2020-02-29 16:52:58,000 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:241: TypeError: Cannot read property of null
2020-02-29 16:53:03,046 - INFO - [MainThread] UM.Controller.deleteAllNodesWithMeshData [386]: Clearing scene
2020-02-29 16:53:03,056 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 16:53:03,059 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 16:53:03,066 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: GroupedOp.(#=1) <UM.Operations.RemoveSceneNodeOperation.RemoveSceneNodeOperation object at 0x600018424558>, took 1ms
2020-02-29 16:53:03,070 - INFO - [MainThread] cura.CuraApplication._removeNodesWithLayerData [1900]: Clearing scene
2020-02-29 16:53:03,868 - WARNING - [MainThread] cura.UI.PrintInformation.setBaseName [360]: Unsupported Mime Type Database file extension 
2020-02-29 16:53:05,598 - INFO - [MainThread] cura.UI.MachineActionManager.addDefaultMachineActions [56]: Default machine actions have been added for machine definition [wanhao_i3plus], do nothing.
2020-02-29 16:53:05,615 - WARNING - [MainThread] cura.Settings.GlobalStack.addExtruder [179]: Extruder [wanhao_i3plus_extruder_0 #3] has already been added to this stack [GreyLeader]
2020-02-29 16:53:05,617 - WARNING - [MainThread] cura.Settings.ExtruderManager.registerExtruder [156]: Extruder [wanhao_i3plus_extruder_0 #3] has already been registered on machine [GreyLeader], not doing anything
2020-02-29 16:53:05,621 - INFO - [MainThread] UM.Logger.info [112]: Initializing Active Machine...
2020-02-29 16:53:05,626 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-02-29 16:53:05,651 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device GreyLeader already added
2020-02-29 16:53:05,654 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device GreyLeader already added
2020-02-29 16:53:05,656 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device GreyLeader already added
2020-02-29 16:53:05,657 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [303]: Connection with instance GreyLeader with url http://192.168.2.156:80/ started
2020-02-29 16:53:05,670 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/SettingsMenu.qml:51: TypeError: Cannot read property 'isEnabled' of undefined
2020-02-29 16:53:05,673 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/SettingsMenu.qml:44: TypeError: Cannot read property 'isEnabled' of undefined
2020-02-29 16:53:05,676 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/MaterialMenu.qml:26: TypeError: Cannot read property 'isEnabled' of undefined
2020-02-29 16:53:05,679 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/MaterialMenu.qml:28: TypeError: Cannot read property 'material' of undefined
2020-02-29 16:53:05,682 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-02-29 16:53:05,743 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-02-29 16:53:05,760 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-02-29 16:53:05,763 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-02-29 16:53:06,370 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device GreyLeader already added
2020-02-29 16:53:06,372 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device GreyLeader already added
2020-02-29 16:53:06,374 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device GreyLeader already added
2020-02-29 16:53:06,376 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device GreyLeader already added
2020-02-29 16:53:06,398 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [135]: New error check scheduled.
2020-02-29 16:53:06,776 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-02-29 16:53:06,784 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [63]: Updating QualityProfilesDropDownMenuModel.
2020-02-29 16:53:07,368 - INFO - [MainThread] cura.Machines.MachineErrorChecker._setResult [187]: Error check finished, result = False, time = 1.0s
2020-02-29 16:53:07,683 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [741]: Set OctoPrint camera url to http://192.168.2.156:80/webcam/?action=stream
2020-02-29 16:53:15,486 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-02-29 16:53:29,348 - INFO - [Thread-6] STLReader.STLReader.load_file [51]: Using NumPy-STL to load STL data.
2020-02-29 16:53:29,356 - DEBUG - [Thread-6] UM.Mesh.MeshData.calculateNormalsFromVertices [495]: Calculating normals took 0.00013184547424316406 seconds
2020-02-29 16:53:29,357 - DEBUG - [Thread-6] STLReader.STLReader._read [102]: Loaded a mesh with 180 vertices
2020-02-29 16:53:29,364 - DEBUG - [Thread-6] UM.Mesh.MeshData.approximateConvexHull [452]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.0017650127410888672 seconds. 10 input vertices. 10 output vertices.
2020-02-29 16:53:29,373 - DEBUG - [Thread-6] UM.FileHandler.ReadFileJob.run [71]: Loading file took 0.0 seconds
2020-02-29 16:53:29,380 - DEBUG - [Thread-6] UM.Mesh.MeshData.approximateConvexHull [452]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.0018160343170166016 seconds. 10 input vertices. 10 output vertices.
2020-02-29 16:53:29,413 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: <UM.Operations.AddSceneNodeOperation.AddSceneNodeOperation object at 0x600018200c58>, took 3ms
2020-02-29 16:53:33,677 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._terminate [292]: Attempting to kill the engine process
2020-02-29 16:53:33,683 - DEBUG - [MainThread] UM.Backend.Backend._createSocket [213]: Previous socket existed. Closing that first.
2020-02-29 16:53:33,691 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [173]: Socket state changed to Listening
2020-02-29 16:53:33,729 - INFO - [MainThread] UM.Backend.Backend.startEngine [81]: Started engine process: /Applications/Ultimaker Cura 3.app/Contents/MacOS/CuraEngine
2020-02-29 16:53:33,732 - DEBUG - [MainThread] UM.Backend.Backend._backendLog [101]: [Backend] Calling engine with: ['/Applications/Ultimaker Cura 3.app/Contents/MacOS/CuraEngine', 'connect', '127.0.0.1:49674', '']
2020-02-29 16:53:33,735 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-02-29 16:53:33,740 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] Cura_SteamEngine version 4.5.0
2020-02-29 16:53:33,743 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] Copyright (C) 2019 Ultimaker
2020-02-29 16:53:33,743 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [177]: Socket state changed to Connected
2020-02-29 16:53:33,746 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-02-29 16:53:33,749 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] This program is free software: you can redistribute it and/or modify
2020-02-29 16:53:33,751 - DEBUG - [MainThread] UM.Backend.Backend._onSocketStateChanged [167]: Backend connected on port 49674
2020-02-29 16:53:33,754 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] it under the terms of the GNU Affero General Public License as published by
2020-02-29 16:53:33,757 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] the Free Software Foundation, either version 3 of the License, or
2020-02-29 16:53:33,760 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] (at your option) any later version.
2020-02-29 16:53:33,762 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-02-29 16:53:33,766 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] This program is distributed in the hope that it will be useful,
2020-02-29 16:53:33,770 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] but WITHOUT ANY WARRANTY; without even the implied warranty of
2020-02-29 16:53:33,775 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
2020-02-29 16:53:33,777 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'JST Join Jig.stl'>,rot.=Q<-0.13052619222005157,-0.0,-0.0,w=0.9914448613738104>), took 11ms
2020-02-29 16:53:33,780 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] GNU Affero General Public License for more details.
2020-02-29 16:53:33,786 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-02-29 16:53:33,791 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] You should have received a copy of the GNU Affero General Public License
2020-02-29 16:53:33,795 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] along with this program.  If not, see <http://www.gnu.org/licenses/>.
2020-02-29 16:53:33,880 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'JST Join Jig.stl'>,rot.=Q<-0.9238795325112867,-0.0,-0.0,w=0.38268343236508984>), took 3ms
2020-02-29 16:53:34,132 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'JST Join Jig.stl'>,rot.=Q<-0.13052619222005157,-0.0,-0.0,w=0.9914448613738104>), took 2ms
2020-02-29 16:53:34,232 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'JST Join Jig.stl'>,rot.=Q<-0.13052619222005157,-0.0,-0.0,w=0.9914448613738104>), took 2ms
2020-02-29 16:53:39,486 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-02-29 16:53:39,785 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [225]: Starting to slice...
2020-02-29 16:53:39,786 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [243]: Going to slice build plate [0]!
2020-02-29 16:53:40,095 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onStartSliceCompleted [429]: Sending slice message took 0.3091261386871338 seconds
2020-02-29 16:53:40,257 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING]  -s extruders_enabled_count="1" -s support_interface_density="100" -s cool_fan_speed="100.0" -s raft_base_thickness="0.36" -s bridge_skin_material_flow="60" -s slicing_tolerance="middle" -s material_end_of_filament_purge_speed="0.5" -s prime_tower_size="20" -s retraction_retract_speed="25" -s speed_layer_0="30.0" -s infill="0" -s small_feature_speed_factor="50" -s speed_prime_tower="60" -s support_brim_enable="False" -s infill_multiplier="1" -s gradual_support_infill_steps="0" -s initial_extruder_nr="0" -s infill_extruder_nr="-1" -s infill_sparse_density="20" -s bottom_skin_expand_distance="0.8" -s machine_nozzle_cool_down_speed="2.0" -s infill_offset_x="0" -s machine_depth="190" -s adhesion_z_offset_extensive_processing="False" -s limit_support_retractions="True" -s machine_max_acceleration_y="9000" -s infill_offset_y="0" -s acceleration_print_layer_0="3000" -s wall_min_flow_retract="False" -s speed_support_roof="20.0" -s xy_offset_layer_0="0" -s adhesion_type="skirt" -s z_seam_position="back" -s material_guid="" -s magic_spiralize="False" -s material_linear_advance_factor_support_interface="0" -s machine_max_acceleration_x="9000" -s material_linear_advance_factor_infill="0" -s print_temperature="210" -s skin_angles="[ ]" -s gradual_support_infill_step_height="1" -s support_conical_angle="30" -s raft_surface_acceleration="3000" -s jerk_layer_0="20" -s machine_max_feedrate_x="299792458000" -s support_pattern="lines" -s jerk_infill="20" -s speed_equalize_flow_enabled="False" -s top_thickness="0.8" -s bottom_skin_preshrink="0.8" -s raft_surface_line_spacing="0.4" -s wall_line_width="0.4" -s xy_offset="0" -s alternate_carve_order="True" -s travel_avoid_other_parts="True" -s raft_interface_speed="22.5" -s travel_avoid_distance="0.625" -s support_interface_height="1" -s jerk_travel_layer_0="30.0" -s date="29-02-2020" -s wireframe_flow="100" -s machine_acceleration="4000" -s machine_minimum_feedrate="0.0" -s skin_preshrink="0.8" -s jerk_wall="20" -s retract_at_layer_change="False" -s jerk_travel="30" -s support_skip_some_zags="False" -s minimum_roof_area="1.0" -s wireframe_flow_connection="100" -s bridge_skin_density="100" -s skirt_brim_line_width="0.4" -s top_bottom_pattern="lines" -s travel_compensate_overlapping_walls_0_enabled="True" -s flow_rate_max_extrusion_offset="0" -s material_diameter="2.85" -s support_bottom_line_width="0.4" -s raft_smoothing="5" -s speed_topbottom="30.0" -s wireframe_drag_along="0.6" -s material_break_speed="25" -s raft_interface_acceleration="3000" -s minimum_polygon_circumference="1.0" -s support_interface_skip_height="0.3" -s speed_print="60" -s skin_edge_support_layers="0" -s support_type="buildplate" -s support_roof_line_width="0.4" -s wireframe_printspeed_bottom="5" -s raft_surface_line_width="0.4" -s prime_tower_min_volume="6" -s prime_blob_enable="False" -s switch_extruder_prime_speed="20" -s wall_x_extruder_nr="-1" -s machine_steps_per_mm_z="50" -s smooth_spiralized_contours="True" -s ooze_shield_dist="2" -s bridge_wall_material_flow="50" -s cool_fan_full_layer="2" -s roofing_material_flow="100" -s wipe_hop_speed="10" -s infill_angles="[ ]" -s infill_line_distance="4.0" -s minimum_bottom_area="1.0" -s minimum_support_area="0.0" -s material_linear_advance_factor_wall_0="0" -s wall_0_wipe_dist="0.2" -s switch_extruder_extra_prime_amount="0" -s material_extrusion_cool_down_speed="0.7" -s wall_x_material_flow="100" -s support_xy_distance_overhang="0.2" -s wireframe_printspeed_up="5" -s resolution="0" -s retraction_hop="1" -s jerk_wall_0="20" -s skin_material_flow="100" -s support_bottom_density="100" -s jerk_support_interface="20" -s material_print_temperature_layer_0="210" -s retraction_min_travel="0.8" -s support_xy_overrides_z="z_overrides_xy" -s min_infill_area="0" -s machine_nozzle_tip_outer_diameter="1" -s machine_steps_per_mm_x="50" -s material_break_preparation_temperature="210" -s machine_nozzle_size="0.4" -s support_initial_layer_line_distance="0" -s center_object="False" -s spaghetti_inset="0.2" -s mold_enabled="False" -s acceleration_travel="5000" -s acceleration_wall="3000" -s support_bottom_material_flow="100" -s ironing_enabled="False" -s cooling="0" -s support_infill_angles="[ ]" -s shell="0" -s bridge_skin_material_flow_2="100" -s speed_support_interface="40.0" -s meshfix="0" -s acceleration_skirt_brim="3000" -s support_line_distance="0" -s retraction_enable="True" -s retraction_hop_enabled="False" -s switch_extruder_retraction_speed="20" -s acceleration_roofing="3000" -s anti_overhang_mesh="False" -s cool_min_layer_time_fan_speed_max="10" -s wipe_retraction_speed="25" -s retraction_amount="6.5" -s retraction_combing="all" -s material_flow_layer_0="100" -s wall_material_flow="100" -s extruder_prime_pos_z="0" -s support_tower_roof_angle="65" -s connect_skin_polygons="False" -s infill_pattern="grid" -s magic_fuzzy_skin_thickness="0.3" -s meshfix_extensive_stitching="False" -s infill_wipe_dist="0.1" -s skirt_brim_material_flow="100" -s bridge_skin_speed="15.0" -s mesh_position_x="0" -s prime_tower_position_y="165.6" -s jerk_wall_x="20" -s support_bottom_extruder_nr="0" -s support_roof_height="1.2" -s cutting_mesh="False" -s machine_max_jerk_xy="20.0" -s support_material_flow="100" -s bridge_fan_speed="100" -s support_line_width="0.4" -s ooze_shield_enabled="False" -s support_extruder_nr="0" -s wall_thickness="0.8" -s support_bottom_distance="0" -s material_crystallinity="False" -s machine_steps_per_mm_e="1600" -s dual="0" -s support_bottom_enable="False" -s wireframe_nozzle_clearance="1" -s speed_infill="60" -s machine_nozzle_id="unknown" -s wipe_brush_pos_x="100" -s acceleration_travel_layer_0="5000.0" -s meshfix_maximum_deviation="0.05" -s cool_fan_enabled="True" -s wall_overhang_angle="90" -s cool_fan_speed_max="100.0" -s raft_surface_layers="2" -s skirt_brim_minimal_length="250" -s material_linear_advance_factor="0" -s cool_min_layer_time="5" -s day="Sat" -s wipe_retraction_enable="True" -s travel_avoid_supports="False" -s acceleration_infill="3000" -s material_bed_temperature="66" -s bridge_skin_material_flow_3="110" -s bridge_fan_speed_2="0" -s initial_bottom_layers="8" -s support_interface_pattern="concentric" -s cross_infill_density_image="" -s adaptive_layer_height_variation="0.1" -s infill_wall_line_count="0" -s support_supported_skin_fan_speed="100" -s extruder_prime_pos_y="0" -s machine_name="Wanhao Duplicator i3 Plus" -s retraction_prime_speed="25" -s material_linear_advance_factor_prime_tower="0" -s z_seam_type="sharpest_corner" -s meshfix_keep_open_polygons="False" -s support_use_towers="True" -s infill_support_enabled="False" -s cool_fan_speed_0="0" -s support_brim_line_count="20" -s blackmagic="0" -s material_print_temp_wait="True" -s support_roof_angles="[ ]" -s infill_mesh_order="0" -s support="0" -s spaghetti_infill_enabled="False" -s acceleration_support="3000" -s support_interface_offset="0.0" -s support_tree_enable="True" -s acceleration_wall_0="3000" -s wireframe_top_jump="0.6" -s jerk_support_bottom="20" -s speed_support_bottom="20.0" -s support_conical_min_width="5.0" -s bottom_layers="8" -s material_flow_dependent_temperature="False" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s support_wall_count="1" -s machine_max_acceleration_z="100" -s skin_edge_support_thickness="0" -s coasting_min_volume="0.8" -s material_linear_advance_factor_wall="0" -s cool_fan_full_at_height="0.3" -s draft_shield_dist="10" -s layer_height="0.1" -s material_break_preparation_retracted_position="-16" -s infill_mesh="False" -s mold_angle="40" -s raft_speed="30.0" -s machine_max_jerk_z="0.4" -s support_tree_angle="40" -s wall_line_width_0="0.4" -s cross_infill_pocket_size="4.0" -s machine_max_jerk_e="5.0" -s raft_margin="15" -s raft_surface_speed="30.0" -s infill_enable_travel_optimization="False" -s machine_height="180" -s travel_retract_before_outer_wall="False" -s infill_support_angle="40" -s adaptive_layer_height_variation_step="0.01" -s raft_surface_jerk="20" -s bridge_sparse_infill_max_density="0" -s wireframe_printspeed_flat="5" -s draft_shield_height_limitation="full" -s magic_fuzzy_skin_enabled="False" -s jerk_enabled="False" -s support_mesh_drop_down="True" -s wireframe_roof_fall_down="2" -s wireframe_strategy="compensate" -s machine_gcode_flavor="RepRap (Marlin/Sprinter)" -s conical_overhang_angle="50" -s infill_overlap_mm="0.04" -s mesh_position_z="0" -s travel_speed="120" -s speed="0" -s small_hole_max_size="0" -s material_bed_temp_prepend="True" -s material="0" -s infill_before_walls="True" -s meshfix_maximum_resolution="0.5" -s wipe_repeat_count="5" -s support_tree_branch_distance="1" -s retraction_speed="25" -s gradual_infill_steps="0" -s machine_show_variants="False" -s support_interface_material_flow="100" -s infill_overlap="10" -s jerk_support="20" -s wall_line_width_x="0.4" -s roofing_extruder_nr="-1" -s raft_base_acceleration="3000" -s wall_extruder_nr="-1" -s adaptive_layer_height_threshold="0.2" -s min_skin_width_for_expansion="4.898587196589413e-17" -s material_no_load_move_factor="0.940860215" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s max_skin_angle_for_expansion="90" -s sub_div_rad_add="0.4" -s support_tree_branch_diameter_angle="5" -s top_bottom_pattern_0="lines" -s alternate_extra_perimeter="False" -s support_roof_enable="True" -s bridge_wall_coast="100" -s raft_interface_fan_speed="0" -s support_offset="0" -s wireframe_fall_down="0.5" -s material_flow="100" -s cross_support_density_image="" -s wireframe_height="3" -s z_seam_relative="False" -s support_tower_maximum_supported_diameter="3.0" -s support_interface_extruder_nr="0" -s nozzle_disallowed_areas="[]" -s support_xy_distance="0.7" -s speed_wall="30.0" -s bridge_enable_more_layers="True" -s conical_overhang_enabled="False" -s speed_travel_layer_0="60.0" -s draft_shield_height="10" -s z_seam_x="100.0" -s retraction_combing_max_distance="0" -s support_infill_rate="0" -s spaghetti_max_infill_angle="10" -s acceleration_support_interface="3000" -s machine_feeder_wheel_diameter="10.0" -s retraction_hop_only_when_collides="False" -s extruder_prime_pos_x="0" -s build_volume_temperature="28" -s layer_start_y="0.0" -s material_break_retracted_position="-50" -s material_initial_print_temperature="200" -s support_infill_extruder_nr="0" -s coasting_speed="90" -s carve_multiple_volumes="False" -s flow_rate_extrusion_offset_factor="100" -s acceleration_wall_x="3000" -s skin_overlap_mm="0.02" -s small_feature_max_length="0.0" -s wall_0_extruder_nr="-1" -s material_maximum_park_duration="300" -s machine_nozzle_temp_enabled="True" -s switch_extruder_retraction_amount="16" -s skirt_brim_speed="30.0" -s wipe_retraction_extra_prime_amount="0" -s ironing_only_highest_layer="False" -s acceleration_topbottom="3000" -s machine_settings="0" -s adhesion_extruder_nr="0" -s mold_width="5" -s jerk_support_infill="20" -s wall_overhang_speed_factor="100" -s jerk_prime_tower="20" -s skin_outline_count="1" -s bridge_skin_speed_2="15.0" -s machine_max_feedrate_y="299792458000" -s support_roof_material_flow="100" -s bridge_skin_density_2="75" -s support_tower_diameter="3.0" -s material_linear_advance_factor_support="0" -s command_line_settings="0" -s brim_replaces_support="True" -s prime_tower_wipe_enabled="True" -s fill_perimeter_gaps="everywhere" -s skin_overlap="5" -s print_sequence="all_at_once" -s acceleration_support_infill="3000" -s brim_gap="0" -s spaghetti_infill_extra_volume="0" -s support_connect_zigzags="True" -s adaptive_layer_height_enabled="False" -s travel_compensate_overlapping_walls_enabled="True" -s roofing_pattern="lines" -s fill_outline_gaps="False" -s support_zag_skip_count="0" -s machine_filament_park_distance="16" -s acceleration_print="3000" -s material_linear_advance_factor_wall_x="0" -s material_final_print_temperature="195" -s ooze_shield_angle="60" -s machine_endstop_positive_direction_x="False" -s travel_compensate_overlapping_walls_x_enabled="True" -s coasting_volume="0.064" -s machine_endstop_positive_direction_z="True" -s small_feature_speed_factor_0="50" -s machine_shape="rectangular" -s machine_heated_bed="True" -s machine_use_extruder_offset_to_offset_coords="True" -s brim_outside_only="True" -s material_standby_temperature="150" -s support_bottom_stair_step_height="0.3" -s speed_roofing="30.0" -s roofing_line_width="0.4" -s material_print_temp_prepend="True" -s wireframe_printspeed_down="5" -s minimum_interface_area="1.0" -s draft_shield_enabled="False" -s speed_support="60" -s adhesion_z_offset="0" -s wireframe_roof_outer_delay="0.2" -s ironing_inset="0.2" -s bridge_fan_speed_3="0" -s initial_layer_line_width_factor="100.0" -s machine_start_gcode="" -s experimental="0" -s bridge_wall_min_length="5" -s prime_tower_position_x="195.6" -s wipe_retraction_amount="6.5" -s material_break_temperature="50" -s top_bottom_extruder_nr="-1" -s acceleration_support_roof="3000" -s support_roof_offset="0.0" -s wall_0_material_flow="100" -s wireframe_flow_flat="100" -s speed_print_layer_0="30.0" -s default_material_bed_temperature="60" -s raft_jerk="20" -s machine_end_gcode="" -s machine_center_is_zero="False" -s support_conical_enabled="False" -s material_anti_ooze_retraction_speed="5" -s machine_head_with_fans_polygon="[[-20, 10], [10, 10], [10, -10], [-20, -10]]" -s z_seam_corner="z_seam_corner_inner" -s support_interface_angles="[ ]" -s bottom_thickness="0.8" -s raft_interface_line_spacing="1.0" -s material_flush_purge_length="60" -s machine_nozzle_heat_up_speed="2.0" -s cool_fan_speed_min="100.0" -s wipe_move_distance="20" -s bridge_skin_speed_3="15.0" -s magic_fuzzy_skin_point_dist="0.8" -s filter_out_tiny_gaps="True" -s spaghetti_flow="20" -s machine_heated_build_volume="False" -s extruder_prime_pos_abs="False" -s material_adhesion_tendency="10" -s infill_sparse_thickness="0.1" -s speed_wall_0="30.0" -s machine_extruders_share_heater="False" -s cool_lift_head="False" -s zig_zaggify_infill="False" -s acceleration_enabled="False" -s support_roof_extruder_nr="0" -s layer_start_x="0.0" -s machine_min_cool_heat_time_window="50.0" -s multiple_mesh_overlap="0.15" -s wipe_retraction_retract_speed="25" -s support_bottom_pattern="concentric" -s material_break_preparation_speed="2" -s acceleration_support_bottom="3000" -s material_end_of_filament_purge_length="20" -s wireframe_roof_drag_along="0.8" -s support_bottom_line_distance="0.4" -s wall_min_flow="0" -s ironing_flow="10.0" -s acceleration_prime_tower="3000" -s retraction_hop_after_extruder_switch_height="1" -s skirt_gap="3" -s speed_ironing="20.0" -s machine_max_acceleration_e="10000" -s line_width="0.4" -s zig_zaggify_support="False" -s wipe_hop_enable="False" -s optimize_wall_printing_order="False" -s raft_interface_line_width="0.8" -s gantry_height="180" -s material_surface_energy="100" -s print_bed_temperature="66" -s magic_mesh_surface_mode="normal" -s raft_fan_speed="0" -s wireframe_up_half_speed="0.3" -s machine_max_feedrate_e="299792458000" -s spaghetti_infill_stepped="True" -s raft_surface_fan_speed="0" -s meshfix_union_all_remove_holes="False" -s speed_wall_x="60.0" -s raft_base_jerk="20" -s machine_extruder_count="1" -s jerk_support_roof="20" -s wireframe_top_delay="0" -s machine_endstop_positive_direction_y="False" -s jerk_topbottom="20" -s remove_empty_first_layers="True" -s support_bottom_height="1" -s raft_acceleration="3000" -s jerk_print_layer_0="20" -s wireframe_roof_inset="3" -s material_anti_ooze_retracted_position="-4" -s expand_skins_expand_distance="0.8" -s bridge_wall_speed="15.0" -s support_bottom_offset="0.0" -s wireframe_flat_delay="0.1" -s machine_nozzle_expansion_angle="45" -s brim_line_count="8" -s support_roof_line_distance="0.4" -s prime_tower_line_width="0.4" -s infill_line_width="0.4" -s magic_fuzzy_skin_outside_only="False" -s speed_equalize_flow_max="150" -s jerk_roofing="20" -s raft_base_line_width="0.8" -s coasting_enable="False" -s support_interface_line_width="0.4" -s support_bottom_angles="[ ]" -s support_skip_zag_per_mm="20" -s support_extruder_nr_layer_0="0" -s meshfix_maximum_travel_resolution="0.8" -s cool_min_speed="10" -s machine_disallowed_areas="[]" -s support_interface_enable="False" -s bridge_skin_density_3="80" -s machine_max_feedrate_z="299792458000" -s support_roof_density="100" -s spaghetti_max_height="2.0" -s skirt_line_count="4" -s retraction_count_max="90" -s retraction_extrusion_window="6.5" -s support_fan_enable="False" -s support_roof_pattern="concentric" -s support_mesh="False" -s wireframe_straight_before_down="20" -s material_print_temperature="210" -s retraction_extra_prime_amount="0" -s wireframe_printspeed="5" -s machine_steps_per_mm_y="50" -s support_tree_branch_diameter="2" -s speed_slowdown_layers="2" -s default_material_print_temperature="210" -s roofing_layer_count="0" -s relative_extrusion="False" -s wall_0_inset="0" -s brim_width="8.0" -s speed_support_infill="60" -s raft_base_line_spacing="1.6" -s max_extrusion_before_wipe="10" -s ironing_pattern="zigzag" -s speed_travel="120" -s support_angle="70" -s raft_base_speed="22.5" -s layer_0_z_overlap="0.15" -s speed_z_hop="10" -s platform_adhesion="0" -s support_bottom_stair_step_width="5.0" -s raft_interface_jerk="20" -s material_shrinkage_percentage="0" -s ironing_line_spacing="0.1" -s skin_line_width="0.4" -s connect_infill_polygons="False" -s wireframe_bottom_delay="0" -s mesh_position_y="0" -s infill_randomize_start_location="False" -s machine_nozzle_head_distance="3" -s support_brim_width="8.0" -s top_layers="8" -s support_infill_sparse_thickness="0.1" -s material_bed_temperature_layer_0="66" -s clean_between_layers="False" -s travel="0" -s material_bed_temp_wait="True" -s raft_airgap="0.3" -s material_flush_purge_speed="0.5" -s support_enable="False" -s prime_tower_enable="False" -s raft_surface_thickness="0.1" -s jerk_skirt_brim="20" -s machine_heat_zone_length="16" -s gradual_infill_step_height="1.5" -s outer_inset_first="False" -s prime_tower_brim_enable="False" -s top_skin_preshrink="0.8" -s top_skin_expand_distance="0.8" -s jerk_print="20" -s mold_roof_height="0.5" -s jerk_ironing="20" -s roofing_angles="[ ]" -s support_top_distance="0.1" -s retraction_hop_after_extruder_switch="True" -s material_linear_advance_factor_skirt_brim="0" -s layer_height_0="0.3" -s switch_extruder_retraction_speeds="20" -s machine_firmware_retract="False" -s meshfix_union_all="True" -s support_z_distance="0.1" -s bridge_settings_enabled="False" -s z_seam_y="190" -s acceleration_layer_0="3000" -s raft_interface_thickness="0.15000000000000002" -s wall_line_count="2" -s magic_fuzzy_skin_point_density="1.25" -s top_bottom_thickness="0.8" -s machine_width="200" -s prime_tower_flow="100" -s acceleration_ironing="3000" -s raft_base_fan_speed="0" -s support_tree_collision_resolution="0.2" -s skin_no_small_gaps_heuristic="False" -s wipe_hop_amount="1" -s support_join_distance="2.0" -s machine_buildplate_type="glass" -s time="16:53:39" -s infill_material_flow="100" -s wireframe_enabled="False" -s material_linear_advance_factor_topbottom="0" -s wipe_retraction_prime_speed="25" -s wipe_pause="0" -s bridge_skin_support_threshold="50" -e0 -s switch_extruder_retraction_speeds="20" -s support_interface_density="100" -s cool_fan_speed="80" -s raft_base_thickness="0.36" -s machine_nozzle_offset_x="0" -s initial_layer_line_width_factor="100.0" -s bridge_skin_material_flow="60" -s material_end_of_filament_purge_speed="0.5" -s retraction_retract_speed="40" -s speed_layer_0="12" -s infill="0" -s small_feature_speed_factor="50" -s support_infill_sparse_thickness="0.1" -s speed_prime_tower="30" -s support_brim_enable="False" -s infill_multiplier="1" -s gradual_support_infill_steps="0" -s infill_sparse_density="32" -s bottom_skin_expand_distance="2.4" -s machine_nozzle_cool_down_speed="2.0" -s infill_offset_x="0" -s limit_support_retractions="True" -s machine_extruder_end_pos_x="0" -s infill_offset_y="0" -s acceleration_print_layer_0="3000" -s wall_min_flow_retract="False" -s speed_support_roof="20.0" -s xy_offset_layer_0="0" -s z_seam_position="back" -s material_guid="0ff92885-617b-4144-a03c-9989872454bc" -s material_linear_advance_factor_support_interface="0" -s material_linear_advance_factor_infill="0" -s material_break_preparation_speed="2" -s acceleration_support_bottom="3000" -s material_end_of_filament_purge_length="20" -s gradual_support_infill_step_height="1" -s support_conical_angle="30" -s raft_surface_acceleration="3000" -s support_roof_pattern="concentric" -s jerk_layer_0="20" -s support_pattern="lines" -s jerk_infill="20" -s speed_equalize_flow_enabled="False" -s top_thickness="0.8" -s bottom_skin_preshrink="2.4" -s raft_surface_line_spacing="0.4" -s skin_edge_support_layers="0" -s wall_line_width="0.4" -s xy_offset="0" -s travel_avoid_other_parts="True" -s raft_interface_speed="11.25" -s travel_avoid_distance="0.625" -s support_interface_height="1" -s wipe_move_distance="20" -s cool_fan_speed_min="80" -s acceleration_skirt_brim="3000" -s meshfix="0" -s support_bottom_material_flow="100" -s acceleration_wall="3000" -s ironing_enabled="False" -s acceleration_travel="5000" -s support_supported_skin_fan_speed="100" -s infill_wall_line_count="0" -s support_wall_count="1" -s skin_edge_support_thickness="0" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s experimental="0" -s support_skip_some_zags="False" -s travel_compensate_overlapping_walls_0_enabled="True" -s support_bottom_line_width="0.4" -s material_flow="100" -s support_offset="0" -s raft_smoothing="5" -s speed_topbottom="15.0" -s wipe_hop_enable="False" -s zig_zaggify_support="False" -s speed_print="30" -s prime_tower_min_volume="6" -s jerk_travel="30" -s material_linear_advance_factor_skirt_brim="0" -s support_tree_branch_diameter="2" -s machine_steps_per_mm_y="50" -s acceleration_support_interface="3000" -s spaghetti_max_infill_angle="10" -s bridge_wall_material_flow="50" -s wipe_hop_speed="10" -s jerk_wall_0="20" -s retraction_hop="1" -s wipe_pause="0" -s wipe_retraction_prime_speed="40" -s minimum_support_area="0.0" -s material_linear_advance_factor_wall_0="0" -s wall_0_wipe_dist="0.2" -s switch_extruder_extra_prime_amount="0" -s support_tower_maximum_supported_diameter="3.0" -s spaghetti_infill_extra_volume="0" -s support_connect_zigzags="True" -s support_xy_distance_overhang="0.2" -s bridge_skin_density_3="80" -s support_interface_enable="False" -s resolution="0" -s support_line_width="0.4" -s material_break_preparation_retracted_position="-16" -s support_xy_overrides_z="z_overrides_xy" -s min_infill_area="0" -s machine_nozzle_tip_outer_diameter="1" -s machine_steps_per_mm_x="50" -s infill_angles="[ ]" -s minimum_interface_area="1.0" -s skirt_brim_line_width="0.4" -s top_bottom_pattern="lines" -s cool_fan_full_layer="2" -s center_object="False" -s spaghetti_inset="0.2" -s gradual_infill_steps="0" -s jerk_travel_layer_0="30.0" -s mold_enabled="False" -s raft_surface_line_width="0.4" -s cooling="0" -s support_tree_collision_resolution="0.2" -s raft_base_fan_speed="0" -s material_print_temperature_layer_0="220" -s raft_interface_line_spacing="1.0" -s machine_nozzle_heat_up_speed="2.0" -s material_flush_purge_length="60" -s bridge_skin_material_flow_2="100" -s speed_support_interface="20.0" -s support_interface_offset="0.0" -s jerk_support="20" -s wall_line_width_x="0.4" -s support_line_distance="0" -s retraction_enable="True" -s switch_extruder_retraction_speed="20" -s retraction_hop_enabled="False" -s acceleration_roofing="3000" -s cool_min_layer_time_fan_speed_max="10" -s wipe_retraction_speed="40" -s retraction_amount="2.5" -s raft_speed="15.0" -s mold_angle="40" -s material_flow_layer_0="100" -s wall_material_flow="100" -s bridge_skin_material_flow_3="110" -s bridge_fan_speed_2="0" -s initial_bottom_layers="6" -s support_interface_pattern="concentric" -s connect_skin_polygons="False" -s infill_pattern="gyroid" -s material_flow_dependent_temperature="False" -s bottom_layers="6" -s magic_fuzzy_skin_thickness="0.3" -s meshfix_extensive_stitching="False" -s infill_wipe_dist="0.1" -s machine_extruder_start_pos_abs="False" -s skirt_brim_material_flow="100" -s bridge_skin_speed="10" -s jerk_wall_x="20" -s wipe_retraction_amount="2.5" -s material_break_temperature="50" -s support_roof_height="1.2" -s magic_fuzzy_skin_enabled="False" -s connect_infill_polygons="False" -s machine_extruder_start_code="" -s support_material_flow="100" -s bridge_fan_speed="100" -s bridge_sparse_infill_max_density="0" -s wall_thickness="0.8" -s support_bottom_distance="0" -s material_crystallinity="False" -s machine_steps_per_mm_e="1600" -s jerk_wall="20" -s dual="0" -s support_bottom_enable="False" -s skin_overlap="5" -s speed_infill="30" -s machine_nozzle_id="unknown" -s wipe_brush_pos_x="100" -s acceleration_travel_layer_0="5000.0" -s raft_surface_layers="2" -s skirt_brim_minimal_length="250" -s material_linear_advance_factor="0" -s cool_min_layer_time="5" -s wipe_retraction_enable="True" -s travel_avoid_supports="False" -s acceleration_infill="3000" -s speed_ironing="10.0" -s support_roof_line_width="0.4" -s extruder_prime_pos_y="0" -s material_linear_advance_factor_prime_tower="0" -s retraction_prime_speed="40" -s z_seam_type="sharpest_corner" -s prime_blob_enable="False" -s meshfix_keep_open_polygons="False" -s raft_surface_speed="15.0" -s infill_enable_travel_optimization="False" -s machine_nozzle_temp_enabled="True" -s switch_extruder_retraction_amount="16" -s skirt_brim_speed="12" -s material_maximum_park_duration="300" -s infill_material_flow="100" -s support_use_towers="True" -s infill_support_enabled="False" -s cool_fan_speed_0="0" -s support_brim_line_count="20" -s blackmagic="0" -s multiple_mesh_overlap="0.15" -s wipe_retraction_retract_speed="40" -s material_linear_advance_factor_wall_x="0" -s acceleration_print="3000" -s support_bottom_pattern="concentric" -s meshfix_maximum_deviation="0.05" -s cool_fan_enabled="True" -s wall_overhang_angle="90" -s cool_fan_speed_max="80" -s machine_extruder_end_code="" -s support_roof_angles="[ ]" -s retraction_hop_after_extruder_switch_height="1" -s machine_extruder_end_pos_abs="False" -s support="0" -s spaghetti_infill_enabled="False" -s acceleration_support="3000" -s acceleration_wall_0="3000" -s jerk_support_bottom="20" -s material_extrusion_cool_down_speed="0.7" -s speed_support_bottom="20.0" -s support_conical_min_width="5.0" -s coasting_min_volume="0.8" -s material_linear_advance_factor_wall="0" -s cool_fan_full_at_height="0.3" -s support_infill_angles="[ ]" -s shell="0" -s support_tower_diameter="3.0" -s machine_extruder_start_pos_x="0" -s wipe_hop_amount="1" -s support_join_distance="2.0" -s support_tree_angle="40" -s fill_perimeter_gaps="everywhere" -s prime_tower_wipe_enabled="True" -s machine_heat_zone_length="16" -s jerk_skirt_brim="20" -s raft_jerk="20" -s speed_print_layer_0="12" -s command_line_settings="0" -s material_linear_advance_factor_support="0" -s conical_overhang_angle="50" -s infill_overlap_mm="0.05600000000000001" -s mesh_position_z="0" -s speed="0" -s material_diameter="1.75" -s meshfix_union_all_remove_holes="False" -s gradual_infill_step_height="1.5" -s cool_lift_head="False" -s speed_wall_0="15.0" -s outer_inset_first="False" -s extruder_prime_pos_z="0" -s support_tower_roof_angle="65" -s meshfix_maximum_resolution="0.5" -s wipe_repeat_count="5" -s support_tree_branch_distance="1" -s wall_x_material_flow="100" -s min_skin_width_for_expansion="3.67394039744206e-17" -s material_no_load_move_factor="0.940860215" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s max_skin_angle_for_expansion="90" -s top_bottom_pattern_0="lines" -s alternate_extra_perimeter="False" -s support_roof_enable="True" -s slicing_tolerance="exclusive" -s machine_extruder_end_pos_y="0" -s cross_support_density_image="" -s z_seam_relative="False" -s support_xy_distance="0.7" -s speed_wall="15.0" -s material_final_print_temperature="205" -s machine_endstop_positive_direction_x="False" -s bridge_enable_more_layers="True" -s conical_overhang_enabled="False" -s speed_travel_layer_0="60.0" -s fill_outline_gaps="False" -s machine_filament_park_distance="16" -s support_zag_skip_count="0" -s material_break_retracted_position="-50" -s material_initial_print_temperature="210" -s switch_extruder_prime_speed="20" -s extruder_prime_pos_x="0" -s layer_start_y="0.0" -s filter_out_tiny_gaps="True" -s bridge_skin_speed_3="10" -s spaghetti_flow="20" -s magic_fuzzy_skin_point_dist="0.8" -s coasting_speed="90" -s skin_material_flow="100" -s support_bottom_density="100" -s acceleration_wall_x="3000" -s skin_overlap_mm="0.02" -s small_feature_max_length="0.0" -s support_initial_layer_line_distance="0" -s support_bottom_offset="0.0" -s bridge_wall_speed="10" -s meshfix_union_all="True" -s support_z_distance="0.1" -s infill_line_distance="1.25" -s minimum_bottom_area="1.0" -s retraction_combing_max_distance="0" -s z_seam_x="100.0" -s expand_skins_expand_distance="2.4" -s mesh_position_x="0" -s wipe_retraction_extra_prime_amount="0" -s jerk_support_roof="20" -s machine_endstop_positive_direction_y="False" -s coasting_volume="0.064" -s machine_endstop_positive_direction_z="True" -s small_feature_speed_factor_0="50" -s infill_support_angle="40" -s raft_surface_jerk="20" -s support_interface_skip_height="0.3" -s mold_width="5" -s infill_before_walls="True" -s material="0" -s jerk_support_infill="20" -s wall_overhang_speed_factor="100" -s jerk_prime_tower="20" -s skin_outline_count="1" -s material_anti_ooze_retraction_speed="5" -s support_conical_enabled="False" -s bridge_skin_speed_2="10" -s retract_at_layer_change="False" -s raft_base_jerk="20" -s speed_wall_x="30.0" -s support_roof_material_flow="100" -s bridge_skin_density_2="75" -s brim_replaces_support="True" -s acceleration_support_infill="3000" -s brim_gap="0" -s travel_compensate_overlapping_walls_enabled="True" -s roofing_pattern="lines" -s travel_compensate_overlapping_walls_x_enabled="True" -s wall_line_width_0="0.4" -s cross_infill_pocket_size="1.25" -s raft_margin="15" -s support_bottom_stair_step_height="0.3" -s brim_outside_only="True" -s material_standby_temperature="175" -s speed_roofing="15.0" -s roofing_line_width="0.4" -s speed_support="30" -s ironing_inset="0.2" -s bridge_fan_speed_3="0" -s support_tree_branch_diameter_angle="5" -s support_infill_rate="0" -s infill_randomize_start_location="False" -s mesh_position_y="0" -s wall_line_count="6" -s magic_fuzzy_skin_point_density="1.25" -s platform_adhesion="0" -s support_bottom_stair_step_width="5.0" -s speed_z_hop="10" -s retraction_speed="40" -s wall_0_material_flow="100" -s cool_min_speed="10" -s bridge_skin_density="100" -s raft_base_line_width="0.8" -s machine_nozzle_offset_y="0" -s extruder_nr="0" -s infill_overlap="14" -s support_interface_material_flow="100" -s magic_mesh_surface_mode="normal" -s raft_fan_speed="0" -s raft_interface_line_width="0.8" -s material_surface_energy="100" -s retraction_extrusion_window="2.5" -s support_fan_enable="False" -s machine_extruder_start_pos_y="0" -s extruder_prime_pos_abs="False" -s material_adhesion_tendency="0" -s infill_sparse_thickness="0.1" -s skin_no_small_gaps_heuristic="False" -s machine_nozzle_head_distance="3" -s support_brim_width="8.0" -s top_layers="6" -s material_break_preparation_temperature="220" -s layer_start_x="0.0" -s machine_min_cool_heat_time_window="50.0" -s support_bottom_line_distance="0.4" -s zig_zaggify_infill="False" -s wall_min_flow="0" -s ironing_flow="10.0" -s support_roof_offset="0.0" -s acceleration_support_roof="3000" -s acceleration_prime_tower="3000" -s skirt_gap="3" -s line_width="0.4" -s optimize_wall_printing_order="False" -s raft_acceleration="3000" -s support_bottom_height="1" -s raft_base_acceleration="3000" -s skirt_line_count="4" -s retraction_count_max="90" -s ironing_only_highest_layer="False" -s acceleration_topbottom="3000" -s machine_settings="0" -s small_hole_max_size="0" -s brim_line_count="8" -s support_roof_line_distance="0.4" -s infill_line_width="0.4" -s magic_fuzzy_skin_outside_only="False" -s prime_tower_line_width="0.4" -s jerk_print_layer_0="20" -s material_anti_ooze_retracted_position="-4" -s support_interface_angles="[ ]" -s bottom_thickness="0.8" -s speed_equalize_flow_max="150" -s jerk_roofing="20" -s minimum_roof_area="1.0" -s machine_extruder_cooling_fan_number="0" -s machine_nozzle_size="0.4" -s raft_interface_jerk="20" -s material_shrinkage_percentage="0" -s support_roof_density="100" -s spaghetti_max_height="2.0" -s bridge_skin_support_threshold="50" -s material_linear_advance_factor_topbottom="0" -s material_print_temperature="220" -s retraction_extra_prime_amount="0" -s default_material_print_temperature="200" -s roofing_layer_count="0" -s wall_0_inset="0" -s brim_width="8.0" -s speed_support_infill="30" -s raft_base_line_spacing="1.6" -s max_extrusion_before_wipe="10" -s roofing_material_flow="100" -s prime_tower_flow="100" -s acceleration_ironing="3000" -s raft_interface_acceleration="3000" -s spaghetti_infill_stepped="True" -s raft_surface_fan_speed="0" -s jerk_print="20" -s z_seam_y="190" -s retraction_min_travel="0.8" -s acceleration_layer_0="3000" -s material_break_speed="25" -s ironing_line_spacing="0.1" -s raft_airgap="0.3" -s material_flush_purge_speed="0.5" -s skin_line_width="0.4" -s machine_steps_per_mm_z="50" -s skin_angles="[ ]" -s skin_preshrink="2.4" -s clean_between_layers="False" -s travel="0" -s raft_surface_thickness="0.1" -s top_skin_preshrink="2.4" -s jerk_support_interface="20" -s cross_infill_density_image="" -s support_interface_line_width="0.4" -s support_skip_zag_per_mm="20" -s support_bottom_angles="[ ]" -s ironing_pattern="zigzag" -s speed_travel="150" -s support_angle="70" -s raft_base_speed="11.25" -s layer_0_z_overlap="0.15" -s top_skin_expand_distance="2.4" -s sub_div_rad_add="0.4" -s z_seam_corner="z_seam_corner_inner" -s roofing_angles="[ ]" -s jerk_ironing="20" -s top_bottom_thickness="0.8" -s support_top_distance="0.1" -s retraction_hop_after_extruder_switch="True" -s jerk_topbottom="20" -s bridge_wall_coast="100" -s raft_interface_fan_speed="0" -s raft_interface_thickness="0.15000000000000002" -s meshfix_maximum_travel_resolution="0.8" -s machine_feeder_wheel_diameter="10.0" -s retraction_hop_only_when_collides="False" -s coasting_enable="False" -s mold_roof_height="0.5" -g -e0 -l "0" -s extruder_nr="0"
2020-02-29 16:53:40,739 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 222 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-02-29 16:53:40,835 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 16:53:40,839 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 16:53:40,845 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [663]: Slicing took 1.0588219165802002 seconds
2020-02-29 16:53:40,845 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [664]: Number of models per buildplate: {0: 1}
2020-02-29 16:53:40,845 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [678]: See if there is more to slice...
2020-02-29 16:53:41,020 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [181]: Socket state changed to Closing
2020-02-29 16:53:41,023 - DEBUG - [MainThread] UM.Backend.Backend._onSocketError [203]: Socket debug: Arcus Error (13): Closing socket because other side requested close.
2020-02-29 16:53:41,026 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [183]: Socket state changed to Closed
2020-02-29 16:53:41,027 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onBackendQuit [829]: Backend quit with return code 0. Resetting process and socket.
2020-02-29 16:53:44,123 - DEBUG - [MainThread] LinearAdvanceSettingPlugin.LinearAdvanceSettingPlugin._filterGcode [109]: No used extruders specify a linear advance factor
2020-02-29 16:53:44,351 - DEBUG - [MainThread] UM.Controller.setActiveStage [149]: Setting active stage to MonitorStage
2020-02-29 16:53:44,402 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:211: Error: Cannot assign [undefined] to QString
2020-02-29 16:53:44,420 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._processRequest [308]: Request [43996b0a902c4dd993dfc04e372f7c13] started
2020-02-29 16:53:44,424 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-02-29 16:53:44,649 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-02-29 16:53:44,882 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestFinished [369]: Request [43996b0a902c4dd993dfc04e372f7c13] finished.
2020-02-29 16:53:44,884 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-02-29 16:53:44,886 - INFO - [MainThread] SliceInfoPlugin.SliceInfo._onRequestFinished [275]: SliceInfo sent successfully
2020-02-29 16:53:54,488 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-02-29 16:54:03,322 - DEBUG - [MainThread] UM.Controller.setActiveStage [149]: Setting active stage to PrepareStage
2020-02-29 16:54:03,354 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-02-29 16:54:03,413 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 16:54:03,417 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 16:54:03,422 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/plugins/plugins/PrepareStage/PrepareMain.qml:16:5: QML ActionPanelWidget: Binding loop detected for property "width"
2020-02-29 16:54:03,437 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:79: ReferenceError: stop is not defined
2020-02-29 16:54:03,440 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:63: TypeError: Cannot read property of null
2020-02-29 16:54:03,443 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:91: TypeError: Cannot read property of null
2020-02-29 16:54:03,445 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:102: TypeError: Cannot read property of null
2020-02-29 16:54:03,448 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:103: TypeError: Cannot read property of null
2020-02-29 16:54:03,450 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:139: TypeError: Cannot read property of null
2020-02-29 16:54:03,452 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:140: TypeError: Cannot read property of null
2020-02-29 16:54:03,454 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:120: TypeError: Cannot read property of null
2020-02-29 16:54:03,457 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:122: TypeError: Cannot read property of null
2020-02-29 16:54:03,459 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-02-29 16:54:03,462 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:36: TypeError: Cannot read property of null
2020-02-29 16:54:03,464 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:37: TypeError: Cannot read property of null
2020-02-29 16:54:03,466 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:49: TypeError: Cannot read property of null
2020-02-29 16:54:03,468 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:59: TypeError: Cannot read property of null
2020-02-29 16:54:03,471 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:61: TypeError: Cannot read property of null
2020-02-29 16:54:03,473 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:63: TypeError: Cannot read property of null
2020-02-29 16:54:03,475 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ExtruderBox.qml:20: TypeError: Cannot read property of null
2020-02-29 16:54:03,477 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:29: TypeError: Cannot read property of null
2020-02-29 16:54:03,480 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:30: TypeError: Cannot read property of null
2020-02-29 16:54:03,482 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:40: TypeError: Cannot read property of null
2020-02-29 16:54:03,484 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:73: TypeError: Cannot read property of null
2020-02-29 16:54:03,487 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:135: TypeError: Cannot read property of null
2020-02-29 16:54:03,490 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:246: TypeError: Cannot read property of null
2020-02-29 16:54:03,492 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:247: TypeError: Cannot read property of null
2020-02-29 16:54:03,495 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:173: TypeError: Cannot read property of null
2020-02-29 16:54:03,498 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:175: TypeError: Cannot read property of null
2020-02-29 16:54:03,501 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:190: TypeError: Cannot read property of null
2020-02-29 16:54:03,503 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:193: TypeError: Cannot read property of null
2020-02-29 16:54:03,506 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:60: TypeError: Cannot read property of null
2020-02-29 16:54:03,508 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:248: TypeError: Cannot read property of null
2020-02-29 16:54:03,511 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:294: TypeError: Cannot read property of null
2020-02-29 16:54:03,513 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:26: TypeError: Cannot read property of null
2020-02-29 16:54:03,515 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:27: TypeError: Cannot read property of null
2020-02-29 16:54:03,519 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:388: TypeError: Cannot read property of null
2020-02-29 16:54:03,521 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:390: TypeError: Cannot read property of null
2020-02-29 16:54:03,523 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:391: TypeError: Cannot read property of null
2020-02-29 16:54:03,526 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:26: TypeError: Cannot read property of null
2020-02-29 16:54:03,528 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:27: TypeError: Cannot read property of null
2020-02-29 16:54:03,531 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:24: TypeError: Cannot read property of null
2020-02-29 16:54:03,533 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:30: TypeError: Cannot read property of null
2020-02-29 16:54:03,536 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:39: TypeError: Cannot read property of null
2020-02-29 16:54:03,538 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:24: TypeError: Cannot read property of null
2020-02-29 16:54:03,541 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:30: TypeError: Cannot read property of null
2020-02-29 16:54:03,544 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:39: TypeError: Cannot read property of null
2020-02-29 16:54:03,546 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:24: TypeError: Cannot read property of null
2020-02-29 16:54:03,549 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:30: TypeError: Cannot read property of null
2020-02-29 16:54:03,551 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:39: TypeError: Cannot read property of null
2020-02-29 16:54:03,553 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupTooltip.qml:67: TypeError: Cannot read property of null
2020-02-29 16:54:03,555 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupTooltip.qml:69: TypeError: Cannot read property of null
2020-02-29 16:54:03,558 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupTooltip.qml:71: TypeError: Cannot read property of null
2020-02-29 16:54:03,560 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:150: TypeError: Cannot read property of null
2020-02-29 16:54:03,562 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-02-29 16:54:03,564 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:166: TypeError: Cannot read property of null
2020-02-29 16:54:03,567 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:167: TypeError: Cannot read property of null
2020-02-29 16:54:03,569 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:178: TypeError: Cannot read property of null
2020-02-29 16:54:03,571 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:231: TypeError: Cannot read property of null
2020-02-29 16:54:03,573 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:241: TypeError: Cannot read property of null
2020-02-29 16:54:04,808 - DEBUG - [MainThread] UM.Controller.setActiveStage [149]: Setting active stage to MonitorStage
2020-02-29 16:54:04,849 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:211: Error: Cannot assign [undefined] to QString
2020-02-29 16:54:14,489 - DEBUG - [MainThread] UM.Message._onInactivityTriggered [88]: Hiding message because of inactivity
2020-02-29 16:54:14,494 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-02-29 16:54:21,219 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [772]: Resource created on OctoPrint instance: http://192.168.2.156/api/files/local/WDI3P_JST_Join_Jig.gcode
2020-02-29 16:54:51,488 - DEBUG - [MainThread] UM.Message._onInactivityTriggered [88]: Hiding message because of inactivity
2020-02-29 16:55:00,759 - DEBUG - [MainThread] UM.Controller.setActiveStage [149]: Setting active stage to PrepareStage
2020-02-29 16:55:00,789 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-02-29 16:55:00,848 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 16:55:00,851 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 16:55:00,856 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/plugins/plugins/PrepareStage/PrepareMain.qml:16:5: QML ActionPanelWidget: Binding loop detected for property "width"
2020-02-29 16:55:00,876 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:79: ReferenceError: stop is not defined
2020-02-29 16:55:00,879 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:63: TypeError: Cannot read property of null
2020-02-29 16:55:00,881 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:91: TypeError: Cannot read property of null
2020-02-29 16:55:00,884 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:102: TypeError: Cannot read property of null
2020-02-29 16:55:00,886 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:103: TypeError: Cannot read property of null
2020-02-29 16:55:00,889 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:139: TypeError: Cannot read property of null
2020-02-29 16:55:00,892 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:140: TypeError: Cannot read property of null
2020-02-29 16:55:00,895 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:120: TypeError: Cannot read property of null
2020-02-29 16:55:00,897 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:122: TypeError: Cannot read property of null
2020-02-29 16:55:00,900 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-02-29 16:55:00,902 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:36: TypeError: Cannot read property of null
2020-02-29 16:55:00,904 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:37: TypeError: Cannot read property of null
2020-02-29 16:55:00,906 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:49: TypeError: Cannot read property of null
2020-02-29 16:55:00,909 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:59: TypeError: Cannot read property of null
2020-02-29 16:55:00,911 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:61: TypeError: Cannot read property of null
2020-02-29 16:55:00,913 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:63: TypeError: Cannot read property of null
2020-02-29 16:55:00,915 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ExtruderBox.qml:20: TypeError: Cannot read property of null
2020-02-29 16:55:00,918 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:29: TypeError: Cannot read property of null
2020-02-29 16:55:00,920 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:30: TypeError: Cannot read property of null
2020-02-29 16:55:00,922 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:40: TypeError: Cannot read property of null
2020-02-29 16:55:00,924 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:73: TypeError: Cannot read property of null
2020-02-29 16:55:00,927 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:135: TypeError: Cannot read property of null
2020-02-29 16:55:00,929 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:246: TypeError: Cannot read property of null
2020-02-29 16:55:00,931 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:247: TypeError: Cannot read property of null
2020-02-29 16:55:00,934 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:173: TypeError: Cannot read property of null
2020-02-29 16:55:00,936 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:175: TypeError: Cannot read property of null
2020-02-29 16:55:00,938 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:190: TypeError: Cannot read property of null
2020-02-29 16:55:00,940 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:193: TypeError: Cannot read property of null
2020-02-29 16:55:00,943 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:60: TypeError: Cannot read property of null
2020-02-29 16:55:00,946 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:248: TypeError: Cannot read property of null
2020-02-29 16:55:00,948 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:294: TypeError: Cannot read property of null
2020-02-29 16:55:00,950 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:26: TypeError: Cannot read property of null
2020-02-29 16:55:00,953 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:27: TypeError: Cannot read property of null
2020-02-29 16:55:00,957 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:388: TypeError: Cannot read property of null
2020-02-29 16:55:00,959 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:390: TypeError: Cannot read property of null
2020-02-29 16:55:00,961 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:391: TypeError: Cannot read property of null
2020-02-29 16:55:00,963 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:26: TypeError: Cannot read property of null
2020-02-29 16:55:00,966 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:27: TypeError: Cannot read property of null
2020-02-29 16:55:00,968 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:24: TypeError: Cannot read property of null
2020-02-29 16:55:00,970 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:30: TypeError: Cannot read property of null
2020-02-29 16:55:00,973 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:39: TypeError: Cannot read property of null
2020-02-29 16:55:00,975 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:24: TypeError: Cannot read property of null
2020-02-29 16:55:00,977 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:30: TypeError: Cannot read property of null
2020-02-29 16:55:00,980 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:39: TypeError: Cannot read property of null
2020-02-29 16:55:00,982 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:24: TypeError: Cannot read property of null
2020-02-29 16:55:00,984 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:30: TypeError: Cannot read property of null
2020-02-29 16:55:00,986 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:39: TypeError: Cannot read property of null
2020-02-29 16:55:00,989 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupTooltip.qml:67: TypeError: Cannot read property of null
2020-02-29 16:55:00,991 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupTooltip.qml:69: TypeError: Cannot read property of null
2020-02-29 16:55:00,993 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupTooltip.qml:71: TypeError: Cannot read property of null
2020-02-29 16:55:00,996 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:150: TypeError: Cannot read property of null
2020-02-29 16:55:00,998 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-02-29 16:55:01,000 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:166: TypeError: Cannot read property of null
2020-02-29 16:55:01,003 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:167: TypeError: Cannot read property of null
2020-02-29 16:55:01,005 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:178: TypeError: Cannot read property of null
2020-02-29 16:55:01,007 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:231: TypeError: Cannot read property of null
2020-02-29 16:55:01,010 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:241: TypeError: Cannot read property of null
2020-02-29 16:55:10,488 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-02-29 16:57:36,706 - DEBUG - [MainThread] LinearAdvanceSettingPlugin.LinearAdvanceSettingPlugin._filterGcode [109]: No used extruders specify a linear advance factor
2020-02-29 16:57:36,933 - DEBUG - [MainThread] UM.Controller.setActiveStage [149]: Setting active stage to MonitorStage
2020-02-29 16:57:36,980 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:211: Error: Cannot assign [undefined] to QString
2020-02-29 16:57:36,998 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._processRequest [308]: Request [b32993c5c1a54b3f88d972b77fd68824] started
2020-02-29 16:57:37,002 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-02-29 16:57:37,188 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-02-29 16:57:37,481 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestFinished [369]: Request [b32993c5c1a54b3f88d972b77fd68824] finished.
2020-02-29 16:57:37,483 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-02-29 16:57:37,484 - INFO - [MainThread] SliceInfoPlugin.SliceInfo._onRequestFinished [275]: SliceInfo sent successfully
2020-02-29 16:57:46,492 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-02-29 16:57:48,759 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [772]: Resource created on OctoPrint instance: http://192.168.2.156/api/files/local/WDI3P_JST_Join_Jig.gcode
2020-02-29 17:03:35,769 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Blue Leader"._octoprint._tcp.local
2020-02-29 17:03:35,771 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Orange Leader"._octoprint._tcp.local
2020-02-29 17:03:35,771 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Darth Pooky"._octoprint._tcp.local
2020-02-29 17:03:52,558 - DEBUG - [MainThread] UM.Controller.setActiveStage [149]: Setting active stage to PrepareStage
2020-02-29 17:03:52,595 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-02-29 17:03:52,695 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 17:03:52,698 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 17:03:52,707 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/plugins/plugins/PrepareStage/PrepareMain.qml:16:5: QML ActionPanelWidget: Binding loop detected for property "width"
2020-02-29 17:03:52,724 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:79: ReferenceError: stop is not defined
2020-02-29 17:03:52,728 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:63: TypeError: Cannot read property of null
2020-02-29 17:03:52,731 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:91: TypeError: Cannot read property of null
2020-02-29 17:03:52,734 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:102: TypeError: Cannot read property of null
2020-02-29 17:03:52,737 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:103: TypeError: Cannot read property of null
2020-02-29 17:03:52,739 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:139: TypeError: Cannot read property of null
2020-02-29 17:03:52,741 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:140: TypeError: Cannot read property of null
2020-02-29 17:03:52,744 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:120: TypeError: Cannot read property of null
2020-02-29 17:03:52,746 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:122: TypeError: Cannot read property of null
2020-02-29 17:03:52,748 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-02-29 17:03:52,751 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:36: TypeError: Cannot read property of null
2020-02-29 17:03:52,753 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:37: TypeError: Cannot read property of null
2020-02-29 17:03:52,755 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:49: TypeError: Cannot read property of null
2020-02-29 17:03:52,757 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:59: TypeError: Cannot read property of null
2020-02-29 17:03:52,760 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:61: TypeError: Cannot read property of null
2020-02-29 17:03:52,762 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:63: TypeError: Cannot read property of null
2020-02-29 17:03:52,764 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ExtruderBox.qml:20: TypeError: Cannot read property of null
2020-02-29 17:03:52,767 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:29: TypeError: Cannot read property of null
2020-02-29 17:03:52,769 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:30: TypeError: Cannot read property of null
2020-02-29 17:03:52,771 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:40: TypeError: Cannot read property of null
2020-02-29 17:03:52,774 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:73: TypeError: Cannot read property of null
2020-02-29 17:03:52,776 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:135: TypeError: Cannot read property of null
2020-02-29 17:03:52,778 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:246: TypeError: Cannot read property of null
2020-02-29 17:03:52,780 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:247: TypeError: Cannot read property of null
2020-02-29 17:03:52,783 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:173: TypeError: Cannot read property of null
2020-02-29 17:03:52,785 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:175: TypeError: Cannot read property of null
2020-02-29 17:03:52,787 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:190: TypeError: Cannot read property of null
2020-02-29 17:03:52,789 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:193: TypeError: Cannot read property of null
2020-02-29 17:03:52,792 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:60: TypeError: Cannot read property of null
2020-02-29 17:03:52,795 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:248: TypeError: Cannot read property of null
2020-02-29 17:03:52,797 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:294: TypeError: Cannot read property of null
2020-02-29 17:03:52,800 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:26: TypeError: Cannot read property of null
2020-02-29 17:03:52,802 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:27: TypeError: Cannot read property of null
2020-02-29 17:03:52,806 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:388: TypeError: Cannot read property of null
2020-02-29 17:03:52,808 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:390: TypeError: Cannot read property of null
2020-02-29 17:03:52,810 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:391: TypeError: Cannot read property of null
2020-02-29 17:03:52,813 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:26: TypeError: Cannot read property of null
2020-02-29 17:03:52,815 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:27: TypeError: Cannot read property of null
2020-02-29 17:03:52,817 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:24: TypeError: Cannot read property of null
2020-02-29 17:03:52,819 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:30: TypeError: Cannot read property of null
2020-02-29 17:03:52,822 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:39: TypeError: Cannot read property of null
2020-02-29 17:03:52,824 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:24: TypeError: Cannot read property of null
2020-02-29 17:03:52,826 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:30: TypeError: Cannot read property of null
2020-02-29 17:03:52,828 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:39: TypeError: Cannot read property of null
2020-02-29 17:03:52,831 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:24: TypeError: Cannot read property of null
2020-02-29 17:03:52,833 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:30: TypeError: Cannot read property of null
2020-02-29 17:03:52,836 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:39: TypeError: Cannot read property of null
2020-02-29 17:03:52,838 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupTooltip.qml:67: TypeError: Cannot read property of null
2020-02-29 17:03:52,841 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupTooltip.qml:69: TypeError: Cannot read property of null
2020-02-29 17:03:52,843 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupTooltip.qml:71: TypeError: Cannot read property of null
2020-02-29 17:03:52,845 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:150: TypeError: Cannot read property of null
2020-02-29 17:03:52,848 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-02-29 17:03:52,850 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:166: TypeError: Cannot read property of null
2020-02-29 17:03:52,852 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:167: TypeError: Cannot read property of null
2020-02-29 17:03:52,855 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:178: TypeError: Cannot read property of null
2020-02-29 17:03:52,857 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:231: TypeError: Cannot read property of null
2020-02-29 17:03:52,859 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:241: TypeError: Cannot read property of null
2020-02-29 17:03:58,610 - INFO - [MainThread] cura.UI.MachineActionManager.addDefaultMachineActions [56]: Default machine actions have been added for machine definition [wanhao_i3plus], do nothing.
2020-02-29 17:03:58,618 - WARNING - [MainThread] cura.Settings.GlobalStack.addExtruder [179]: Extruder [wanhao_i3plus_extruder_0 #2] has already been added to this stack [Wanhao Duplicator i3 Plus]
2020-02-29 17:03:58,620 - WARNING - [MainThread] cura.Settings.ExtruderManager.registerExtruder [156]: Extruder [wanhao_i3plus_extruder_0 #2] has already been registered on machine [Wanhao Duplicator i3 Plus], not doing anything
2020-02-29 17:03:58,623 - INFO - [MainThread] UM.Logger.info [112]: Initializing Active Machine...
2020-02-29 17:03:58,633 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 17:03:58,636 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 17:03:58,774 - WARNING - [MainThread] UM.OutputDevice.OutputDeviceManager.removeOutputDevice [179]: Could not find output device with id GreyLeader to remove
2020-02-29 17:03:58,776 - WARNING - [MainThread] UM.OutputDevice.OutputDeviceManager.removeOutputDevice [179]: Could not find output device with id GreyLeader to remove
2020-02-29 17:03:58,779 - WARNING - [MainThread] UM.OutputDevice.OutputDeviceManager.removeOutputDevice [179]: Could not find output device with id GreyLeader to remove
2020-02-29 17:03:58,781 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-02-29 17:03:58,886 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device OrangeLeader already added
2020-02-29 17:03:58,887 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [303]: Connection with instance OrangeLeader with url http://192.168.2.162:80/ started
2020-02-29 17:03:58,898 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/SettingsMenu.qml:51: TypeError: Cannot read property 'isEnabled' of undefined
2020-02-29 17:03:58,900 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/SettingsMenu.qml:44: TypeError: Cannot read property 'isEnabled' of undefined
2020-02-29 17:03:58,904 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/MaterialMenu.qml:26: TypeError: Cannot read property 'isEnabled' of undefined
2020-02-29 17:03:58,907 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/MaterialMenu.qml:28: TypeError: Cannot read property 'material' of undefined
2020-02-29 17:03:58,910 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-02-29 17:03:58,971 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-02-29 17:03:58,990 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-02-29 17:03:58,992 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-02-29 17:03:59,506 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device OrangeLeader already added
2020-02-29 17:03:59,508 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device OrangeLeader already added
2020-02-29 17:03:59,529 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [135]: New error check scheduled.
2020-02-29 17:04:00,023 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-02-29 17:04:00,031 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [63]: Updating QualityProfilesDropDownMenuModel.
2020-02-29 17:04:00,547 - INFO - [MainThread] cura.Machines.MachineErrorChecker._setResult [187]: Error check finished, result = False, time = 1.0s
2020-02-29 17:04:00,550 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [741]: Set OctoPrint camera url to http://192.168.2.162:80/webcam/?action=stream
2020-02-29 17:04:04,487 - INFO - [Thread-1] STLReader.STLReader.load_file [51]: Using NumPy-STL to load STL data.
2020-02-29 17:04:04,494 - DEBUG - [Thread-1] UM.Mesh.MeshData.calculateNormalsFromVertices [495]: Calculating normals took 0.00033211708068847656 seconds
2020-02-29 17:04:04,495 - DEBUG - [Thread-1] STLReader.STLReader._read [102]: Loaded a mesh with 10182 vertices
2020-02-29 17:04:04,514 - DEBUG - [Thread-1] UM.Mesh.MeshData.approximateConvexHull [452]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.014248132705688477 seconds. 813 input vertices. 813 output vertices.
2020-02-29 17:04:04,519 - DEBUG - [Thread-1] UM.FileHandler.ReadFileJob.run [71]: Loading file took 0.0 seconds
2020-02-29 17:04:04,536 - DEBUG - [Thread-1] UM.Mesh.MeshData.approximateConvexHull [452]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.01210784912109375 seconds. 813 input vertices. 813 output vertices.
2020-02-29 17:04:04,599 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: <UM.Operations.AddSceneNodeOperation.AddSceneNodeOperation object at 0x6000187dec98>, took 22ms
2020-02-29 17:04:08,408 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: GroupedOp.(#=1) <UM.Operations.RemoveSceneNodeOperation.RemoveSceneNodeOperation object at 0x60001882b798>, took 5ms
2020-02-29 17:04:13,051 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._terminate [292]: Attempting to kill the engine process
2020-02-29 17:04:13,055 - DEBUG - [MainThread] UM.Backend.Backend._createSocket [213]: Previous socket existed. Closing that first.
2020-02-29 17:04:13,063 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [173]: Socket state changed to Listening
2020-02-29 17:04:13,104 - INFO - [MainThread] UM.Backend.Backend.startEngine [81]: Started engine process: /Applications/Ultimaker Cura 3.app/Contents/MacOS/CuraEngine
2020-02-29 17:04:13,108 - DEBUG - [MainThread] UM.Backend.Backend._backendLog [101]: [Backend] Calling engine with: ['/Applications/Ultimaker Cura 3.app/Contents/MacOS/CuraEngine', 'connect', '127.0.0.1:49674', '']
2020-02-29 17:04:13,111 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-02-29 17:04:13,115 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] Cura_SteamEngine version 4.5.0
2020-02-29 17:04:13,117 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [177]: Socket state changed to Connected
2020-02-29 17:04:13,119 - DEBUG - [MainThread] UM.Backend.Backend._onSocketStateChanged [167]: Backend connected on port 49674
2020-02-29 17:04:13,121 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] Copyright (C) 2019 Ultimaker
2020-02-29 17:04:13,124 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-02-29 17:04:13,126 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] This program is free software: you can redistribute it and/or modify
2020-02-29 17:04:13,131 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] it under the terms of the GNU Affero General Public License as published by
2020-02-29 17:04:13,134 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] the Free Software Foundation, either version 3 of the License, or
2020-02-29 17:04:13,139 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] (at your option) any later version.
2020-02-29 17:04:13,143 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-02-29 17:04:13,146 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] This program is distributed in the hope that it will be useful,
2020-02-29 17:04:13,149 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] but WITHOUT ANY WARRANTY; without even the implied warranty of
2020-02-29 17:04:13,152 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
2020-02-29 17:04:13,156 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] GNU Affero General Public License for more details.
2020-02-29 17:04:13,159 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-02-29 17:04:13,163 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] You should have received a copy of the GNU Affero General Public License
2020-02-29 17:04:13,166 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] along with this program.  If not, see <http://www.gnu.org/licenses/>.
2020-02-29 17:04:13,169 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'screw_box_bottom.stl'>,rot.=Q<-0.13052619222005157,-0.0,-0.0,w=0.9914448613738104>), took 20ms
2020-02-29 17:04:13,249 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'screw_box_bottom.stl'>,rot.=Q<-0.7071067811865475,-0.0,-0.0,w=0.7071067811865476>), took 3ms
2020-02-29 17:04:13,729 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: PlatformPhysicsOp.(trans.=<0.0,14.4,0.0>), took 1ms
2020-02-29 17:04:14,498 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-02-29 17:04:14,822 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'screw_box_bottom.stl'>,rot.=Q<-0.13052619222005157,-0.0,-0.0,w=0.9914448613738104>), took 3ms
2020-02-29 17:04:14,923 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'screw_box_bottom.stl'>,rot.=Q<-0.13052619222005157,-0.0,-0.0,w=0.9914448613738104>), took 2ms
2020-02-29 17:04:15,024 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'screw_box_bottom.stl'>,rot.=Q<-0.13052619222005157,-0.0,-0.0,w=0.9914448613738104>), took 2ms
2020-02-29 17:04:15,137 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'screw_box_bottom.stl'>,rot.=Q<-0.13052619222005157,-0.0,-0.0,w=0.9914448613738104>), took 2ms
2020-02-29 17:04:15,238 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'screw_box_bottom.stl'>,rot.=Q<-0.13052619222005157,-0.0,-0.0,w=0.9914448613738104>), took 2ms
2020-02-29 17:04:15,373 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'screw_box_bottom.stl'>,rot.=Q<-0.13052619222005157,-0.0,-0.0,w=0.9914448613738104>), took 2ms
2020-02-29 17:04:15,869 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'screw_box_bottom.stl'>,rot.=Q<-0.13052619222005157,-0.0,-0.0,w=0.9914448613738104>), took 3ms
2020-02-29 17:04:15,983 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'screw_box_bottom.stl'>,rot.=Q<-0.13052619222005157,-0.0,-0.0,w=0.9914448613738104>), took 3ms
2020-02-29 17:04:16,086 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'screw_box_bottom.stl'>,rot.=Q<-0.25881904510252074,-0.0,-0.0,w=0.9659258262890683>), took 3ms
2020-02-29 17:04:16,186 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'screw_box_bottom.stl'>,rot.=Q<-0.3826834323650898,-0.0,-0.0,w=0.9238795325112867>), took 3ms
2020-02-29 17:04:16,303 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'screw_box_bottom.stl'>,rot.=Q<-0.13052619222005157,-0.0,-0.0,w=0.9914448613738104>), took 3ms
2020-02-29 17:04:16,408 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'screw_box_bottom.stl'>,rot.=Q<-0.13052619222005157,-0.0,-0.0,w=0.9914448613738104>), took 2ms
2020-02-29 17:04:17,139 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'screw_box_bottom.stl'>,rot.=Q<0.13052619222005157,0.0,0.0,w=0.9914448613738104>), took 2ms
2020-02-29 17:04:17,252 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'screw_box_bottom.stl'>,rot.=Q<0.25881904510252074,0.0,0.0,w=0.9659258262890683>), took 3ms
2020-02-29 17:04:17,353 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'screw_box_bottom.stl'>,rot.=Q<0.13052619222005157,0.0,0.0,w=0.9914448613738104>), took 2ms
2020-02-29 17:04:17,620 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'screw_box_bottom.stl'>,rot.=Q<-0.13052619222005157,-0.0,-0.0,w=0.9914448613738104>), took 3ms
2020-02-29 17:04:17,721 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'screw_box_bottom.stl'>,rot.=Q<-0.7071067811865475,-0.0,-0.0,w=0.7071067811865476>), took 3ms
2020-02-29 17:04:17,825 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'screw_box_bottom.stl'>,rot.=Q<-0.13052619222005157,-0.0,-0.0,w=0.9914448613738104>), took 2ms
2020-02-29 17:04:18,019 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'screw_box_bottom.stl'>,rot.=Q<-0.13052619222005157,-0.0,-0.0,w=0.9914448613738104>), took 3ms
2020-02-29 17:04:18,568 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'screw_box_bottom.stl'>,rot.=Q<0.13052619222005157,0.0,0.0,w=0.9914448613738104>), took 2ms
2020-02-29 17:04:18,669 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'screw_box_bottom.stl'>,rot.=Q<0.25881904510252074,0.0,0.0,w=0.9659258262890683>), took 2ms
2020-02-29 17:04:18,773 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'screw_box_bottom.stl'>,rot.=Q<0.3826834323650898,0.0,0.0,w=0.9238795325112867>), took 3ms
2020-02-29 17:04:19,121 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'screw_box_bottom.stl'>,rot.=Q<-0.13052619222005157,-0.0,-0.0,w=0.9914448613738104>), took 4ms
2020-02-29 17:04:19,221 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'screw_box_bottom.stl'>,rot.=Q<-0.13052619222005157,-0.0,-0.0,w=0.9914448613738104>), took 2ms
2020-02-29 17:04:20,056 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: PlatformPhysicsOp.(trans.=<0.0,-7.65,0.0>), took 1ms
2020-02-29 17:04:29,912 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'screw_box_bottom.stl'>,rot.=Q<-0.13052619222005157,-0.0,-0.0,w=0.9914448613738104>), took 4ms
2020-02-29 17:04:30,586 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: PlatformPhysicsOp.(trans.=<0.0,-6.73,0.0>), took 1ms
2020-02-29 17:27:46,618 - INFO - [MainThread] UM.Controller.deleteAllNodesWithMeshData [386]: Clearing scene
2020-02-29 17:27:46,628 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: GroupedOp.(#=1) <UM.Operations.RemoveSceneNodeOperation.RemoveSceneNodeOperation object at 0x6000188eb9d8>, took 5ms
2020-02-29 17:27:46,631 - INFO - [MainThread] cura.CuraApplication._removeNodesWithLayerData [1900]: Clearing scene
2020-02-29 17:27:47,401 - WARNING - [MainThread] cura.UI.PrintInformation.setBaseName [360]: Unsupported Mime Type Database file extension 
2020-02-29 17:28:23,317 - INFO - [Thread-2] STLReader.STLReader.load_file [51]: Using NumPy-STL to load STL data.
2020-02-29 17:28:23,326 - DEBUG - [Thread-2] UM.Mesh.MeshData.calculateNormalsFromVertices [495]: Calculating normals took 0.0002980232238769531 seconds
2020-02-29 17:28:23,327 - DEBUG - [Thread-2] STLReader.STLReader._read [102]: Loaded a mesh with 10182 vertices
2020-02-29 17:28:23,345 - DEBUG - [Thread-2] UM.Mesh.MeshData.approximateConvexHull [452]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.013681888580322266 seconds. 813 input vertices. 813 output vertices.
2020-02-29 17:28:23,352 - DEBUG - [Thread-2] UM.FileHandler.ReadFileJob.run [71]: Loading file took 0.0 seconds
2020-02-29 17:28:23,370 - DEBUG - [Thread-2] UM.Mesh.MeshData.approximateConvexHull [452]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.013660907745361328 seconds. 813 input vertices. 813 output vertices.
2020-02-29 17:28:23,423 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: <UM.Operations.AddSceneNodeOperation.AddSceneNodeOperation object at 0x6000187e6518>, took 21ms
2020-02-29 17:28:25,505 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/plugins/plugins/Tools/RotateTool/RotateTool.qml:70:18: Unable to assign [undefined] to bool
2020-02-29 17:28:25,537 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/toolhandle.shader]...
2020-02-29 17:28:30,486 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: ScaleOp.(node=<CuraSceneNode object: 'screw_box_bottom.stl'>,scale=<1.2,1.2,1.2>,mode=relative), took 5ms
2020-02-29 17:28:30,594 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: PlatformPhysicsOp.(trans.=<0.0,3.45,0.0>), took 1ms
2020-02-29 17:28:43,755 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: ScaleOp.(node=<CuraSceneNode object: 'screw_box_bottom.stl'>,scale=<0.833,0.833,0.833>,mode=relative), took 5ms
2020-02-29 17:28:43,852 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: PlatformPhysicsOp.(trans.=<0.0,-3.45,0.0>), took 1ms
2020-02-29 17:28:54,729 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [225]: Starting to slice...
2020-02-29 17:28:54,729 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [243]: Going to slice build plate [0]!
2020-02-29 17:28:55,047 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onStartSliceCompleted [429]: Sending slice message took 0.31746888160705566 seconds
2020-02-29 17:28:55,273 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING]  -s extruders_enabled_count="1" -s support_interface_density="100" -s cool_fan_speed="100.0" -s raft_base_thickness="0.36" -s bridge_skin_material_flow="60" -s slicing_tolerance="middle" -s material_end_of_filament_purge_speed="0.5" -s prime_tower_size="20" -s retraction_retract_speed="25" -s speed_layer_0="30.0" -s infill="0" -s small_feature_speed_factor="50" -s speed_prime_tower="60" -s support_brim_enable="False" -s infill_multiplier="1" -s gradual_support_infill_steps="0" -s initial_extruder_nr="0" -s infill_extruder_nr="-1" -s infill_sparse_density="20" -s bottom_skin_expand_distance="0.8" -s machine_nozzle_cool_down_speed="2.0" -s infill_offset_x="0" -s machine_depth="200" -s adhesion_z_offset_extensive_processing="False" -s limit_support_retractions="True" -s machine_max_acceleration_y="9000" -s infill_offset_y="0" -s acceleration_print_layer_0="3000" -s wall_min_flow_retract="False" -s speed_support_roof="40.0" -s xy_offset_layer_0="0" -s adhesion_type="skirt" -s z_seam_position="back" -s material_guid="" -s magic_spiralize="False" -s material_linear_advance_factor_support_interface="0" -s machine_max_acceleration_x="9000" -s material_linear_advance_factor_infill="0" -s print_temperature="210" -s skin_angles="[ ]" -s gradual_support_infill_step_height="1" -s support_conical_angle="30" -s raft_surface_acceleration="3000" -s jerk_layer_0="20" -s machine_max_feedrate_x="299792458000" -s support_pattern="lines" -s jerk_infill="20" -s speed_equalize_flow_enabled="False" -s top_thickness="0.8" -s bottom_skin_preshrink="0.8" -s raft_surface_line_spacing="0.4" -s wall_line_width="0.4" -s xy_offset="0" -s alternate_carve_order="True" -s travel_avoid_other_parts="True" -s raft_interface_speed="22.5" -s travel_avoid_distance="0.625" -s support_interface_height="1" -s jerk_travel_layer_0="30.0" -s date="29-02-2020" -s wireframe_flow="100" -s machine_acceleration="4000" -s machine_minimum_feedrate="0.0" -s skin_preshrink="0.8" -s jerk_wall="20" -s retract_at_layer_change="False" -s jerk_travel="30" -s support_skip_some_zags="False" -s minimum_roof_area="1.0" -s wireframe_flow_connection="100" -s bridge_skin_density="100" -s skirt_brim_line_width="0.4" -s top_bottom_pattern="lines" -s travel_compensate_overlapping_walls_0_enabled="True" -s flow_rate_max_extrusion_offset="0" -s material_diameter="2.85" -s support_bottom_line_width="0.4" -s raft_smoothing="5" -s speed_topbottom="30.0" -s wireframe_drag_along="0.6" -s material_break_speed="25" -s raft_interface_acceleration="3000" -s minimum_polygon_circumference="1.0" -s support_interface_skip_height="0.3" -s speed_print="60" -s skin_edge_support_layers="0" -s support_type="buildplate" -s support_roof_line_width="0.4" -s wireframe_printspeed_bottom="5" -s raft_surface_line_width="0.4" -s prime_tower_min_volume="6" -s prime_blob_enable="False" -s switch_extruder_prime_speed="20" -s wall_x_extruder_nr="-1" -s machine_steps_per_mm_z="50" -s smooth_spiralized_contours="True" -s ooze_shield_dist="2" -s bridge_wall_material_flow="50" -s cool_fan_full_layer="2" -s roofing_material_flow="100" -s wipe_hop_speed="10" -s infill_angles="[ ]" -s infill_line_distance="4.0" -s minimum_bottom_area="1.0" -s minimum_support_area="0.0" -s material_linear_advance_factor_wall_0="0" -s wall_0_wipe_dist="0.2" -s switch_extruder_extra_prime_amount="0" -s material_extrusion_cool_down_speed="0.7" -s wall_x_material_flow="100" -s support_xy_distance_overhang="0.2" -s wireframe_printspeed_up="5" -s resolution="0" -s retraction_hop="1" -s jerk_wall_0="20" -s skin_material_flow="100" -s support_bottom_density="100" -s jerk_support_interface="20" -s material_print_temperature_layer_0="210" -s retraction_min_travel="0.8" -s support_xy_overrides_z="z_overrides_xy" -s min_infill_area="0" -s machine_nozzle_tip_outer_diameter="1" -s machine_steps_per_mm_x="50" -s material_break_preparation_temperature="210" -s machine_nozzle_size="0.4" -s support_initial_layer_line_distance="2.6666666666666665" -s center_object="False" -s spaghetti_inset="0.2" -s mold_enabled="False" -s acceleration_travel="5000" -s acceleration_wall="3000" -s support_bottom_material_flow="100" -s ironing_enabled="False" -s cooling="0" -s support_infill_angles="[ ]" -s shell="0" -s bridge_skin_material_flow_2="100" -s speed_support_interface="40.0" -s meshfix="0" -s acceleration_skirt_brim="3000" -s support_line_distance="2.6666666666666665" -s retraction_enable="True" -s retraction_hop_enabled="False" -s switch_extruder_retraction_speed="20" -s acceleration_roofing="3000" -s anti_overhang_mesh="False" -s cool_min_layer_time_fan_speed_max="10" -s wipe_retraction_speed="25" -s retraction_amount="6.5" -s retraction_combing="all" -s material_flow_layer_0="100" -s wall_material_flow="100" -s extruder_prime_pos_z="0" -s support_tower_roof_angle="65" -s connect_skin_polygons="False" -s infill_pattern="grid" -s magic_fuzzy_skin_thickness="0.3" -s meshfix_extensive_stitching="False" -s infill_wipe_dist="0.1" -s skirt_brim_material_flow="100" -s bridge_skin_speed="15.0" -s mesh_position_x="0" -s prime_tower_position_y="175.6" -s jerk_wall_x="20" -s support_bottom_extruder_nr="0" -s support_roof_height="1.2" -s cutting_mesh="False" -s machine_max_jerk_xy="20.0" -s support_material_flow="100" -s bridge_fan_speed="100" -s support_line_width="0.4" -s ooze_shield_enabled="False" -s support_extruder_nr="0" -s wall_thickness="0.8" -s support_bottom_distance="0" -s material_crystallinity="False" -s machine_steps_per_mm_e="1600" -s dual="0" -s support_bottom_enable="False" -s wireframe_nozzle_clearance="1" -s speed_infill="60" -s machine_nozzle_id="unknown" -s wipe_brush_pos_x="100" -s acceleration_travel_layer_0="5000.0" -s meshfix_maximum_deviation="0.05" -s cool_fan_enabled="True" -s wall_overhang_angle="90" -s cool_fan_speed_max="100.0" -s raft_surface_layers="2" -s skirt_brim_minimal_length="250" -s material_linear_advance_factor="0" -s cool_min_layer_time="5" -s day="Sat" -s wipe_retraction_enable="True" -s travel_avoid_supports="False" -s acceleration_infill="3000" -s material_bed_temperature="64" -s bridge_skin_material_flow_3="110" -s bridge_fan_speed_2="0" -s initial_bottom_layers="8" -s support_interface_pattern="concentric" -s cross_infill_density_image="" -s adaptive_layer_height_variation="0.1" -s infill_wall_line_count="0" -s support_supported_skin_fan_speed="100" -s extruder_prime_pos_y="0" -s machine_name="Wanhao Duplicator i3 Plus" -s retraction_prime_speed="25" -s material_linear_advance_factor_prime_tower="0" -s z_seam_type="sharpest_corner" -s meshfix_keep_open_polygons="False" -s support_use_towers="True" -s infill_support_enabled="False" -s cool_fan_speed_0="0" -s support_brim_line_count="20" -s blackmagic="0" -s material_print_temp_wait="True" -s support_roof_angles="[ ]" -s infill_mesh_order="0" -s support="0" -s spaghetti_infill_enabled="False" -s acceleration_support="3000" -s support_interface_offset="0.0" -s support_tree_enable="False" -s acceleration_wall_0="3000" -s wireframe_top_jump="0.6" -s jerk_support_bottom="20" -s speed_support_bottom="40.0" -s support_conical_min_width="5.0" -s bottom_layers="8" -s material_flow_dependent_temperature="False" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s support_wall_count="0" -s machine_max_acceleration_z="100" -s skin_edge_support_thickness="0" -s coasting_min_volume="0.8" -s material_linear_advance_factor_wall="0" -s cool_fan_full_at_height="0.3" -s draft_shield_dist="10" -s layer_height="0.1" -s material_break_preparation_retracted_position="-16" -s infill_mesh="False" -s mold_angle="40" -s raft_speed="30.0" -s machine_max_jerk_z="0.4" -s support_tree_angle="40" -s wall_line_width_0="0.4" -s cross_infill_pocket_size="4.0" -s machine_max_jerk_e="5.0" -s raft_margin="15" -s raft_surface_speed="30.0" -s infill_enable_travel_optimization="False" -s machine_height="180" -s travel_retract_before_outer_wall="False" -s infill_support_angle="40" -s adaptive_layer_height_variation_step="0.01" -s raft_surface_jerk="20" -s bridge_sparse_infill_max_density="0" -s wireframe_printspeed_flat="5" -s draft_shield_height_limitation="full" -s magic_fuzzy_skin_enabled="False" -s jerk_enabled="False" -s support_mesh_drop_down="True" -s wireframe_roof_fall_down="2" -s wireframe_strategy="compensate" -s machine_gcode_flavor="RepRap (Marlin/Sprinter)" -s conical_overhang_angle="50" -s infill_overlap_mm="0.04" -s mesh_position_z="0" -s travel_speed="120" -s speed="0" -s small_hole_max_size="0" -s material_bed_temp_prepend="True" -s material="0" -s infill_before_walls="True" -s meshfix_maximum_resolution="0.5" -s wipe_repeat_count="5" -s support_tree_branch_distance="1" -s retraction_speed="25" -s gradual_infill_steps="0" -s machine_show_variants="False" -s support_interface_material_flow="100" -s infill_overlap="10" -s jerk_support="20" -s wall_line_width_x="0.4" -s roofing_extruder_nr="-1" -s raft_base_acceleration="3000" -s wall_extruder_nr="-1" -s adaptive_layer_height_threshold="0.2" -s min_skin_width_for_expansion="4.898587196589413e-17" -s material_no_load_move_factor="0.940860215" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s max_skin_angle_for_expansion="90" -s sub_div_rad_add="0.4" -s support_tree_branch_diameter_angle="5" -s top_bottom_pattern_0="lines" -s alternate_extra_perimeter="False" -s support_roof_enable="True" -s bridge_wall_coast="100" -s raft_interface_fan_speed="0" -s support_offset="0" -s wireframe_fall_down="0.5" -s material_flow="100" -s cross_support_density_image="" -s wireframe_height="3" -s z_seam_relative="False" -s support_tower_maximum_supported_diameter="3.0" -s support_interface_extruder_nr="0" -s nozzle_disallowed_areas="[]" -s support_xy_distance="0.7" -s speed_wall="30.0" -s bridge_enable_more_layers="True" -s conical_overhang_enabled="False" -s speed_travel_layer_0="60.0" -s draft_shield_height="10" -s z_seam_x="100.0" -s retraction_combing_max_distance="0" -s support_infill_rate="15" -s spaghetti_max_infill_angle="10" -s acceleration_support_interface="3000" -s machine_feeder_wheel_diameter="10.0" -s retraction_hop_only_when_collides="False" -s extruder_prime_pos_x="0" -s build_volume_temperature="28" -s layer_start_y="0.0" -s material_break_retracted_position="-50" -s material_initial_print_temperature="200" -s support_infill_extruder_nr="0" -s coasting_speed="90" -s carve_multiple_volumes="False" -s flow_rate_extrusion_offset_factor="100" -s acceleration_wall_x="3000" -s skin_overlap_mm="0.02" -s small_feature_max_length="0.0" -s wall_0_extruder_nr="-1" -s material_maximum_park_duration="300" -s machine_nozzle_temp_enabled="True" -s switch_extruder_retraction_amount="16" -s skirt_brim_speed="30.0" -s wipe_retraction_extra_prime_amount="0" -s ironing_only_highest_layer="False" -s acceleration_topbottom="3000" -s machine_settings="0" -s adhesion_extruder_nr="0" -s mold_width="5" -s jerk_support_infill="20" -s wall_overhang_speed_factor="100" -s jerk_prime_tower="20" -s skin_outline_count="1" -s bridge_skin_speed_2="15.0" -s machine_max_feedrate_y="299792458000" -s support_roof_material_flow="100" -s bridge_skin_density_2="75" -s support_tower_diameter="3.0" -s material_linear_advance_factor_support="0" -s command_line_settings="0" -s brim_replaces_support="True" -s prime_tower_wipe_enabled="True" -s fill_perimeter_gaps="everywhere" -s skin_overlap="5" -s print_sequence="all_at_once" -s acceleration_support_infill="3000" -s brim_gap="0" -s spaghetti_infill_extra_volume="0" -s support_connect_zigzags="True" -s adaptive_layer_height_enabled="False" -s travel_compensate_overlapping_walls_enabled="True" -s roofing_pattern="lines" -s fill_outline_gaps="False" -s support_zag_skip_count="8" -s machine_filament_park_distance="16" -s acceleration_print="3000" -s material_linear_advance_factor_wall_x="0" -s material_final_print_temperature="195" -s ooze_shield_angle="60" -s machine_endstop_positive_direction_x="False" -s travel_compensate_overlapping_walls_x_enabled="True" -s coasting_volume="0.064" -s machine_endstop_positive_direction_z="True" -s small_feature_speed_factor_0="50" -s machine_shape="rectangular" -s machine_heated_bed="True" -s machine_use_extruder_offset_to_offset_coords="True" -s brim_outside_only="True" -s material_standby_temperature="150" -s support_bottom_stair_step_height="0.3" -s speed_roofing="30.0" -s roofing_line_width="0.4" -s material_print_temp_prepend="True" -s wireframe_printspeed_down="5" -s minimum_interface_area="1.0" -s draft_shield_enabled="False" -s speed_support="60" -s adhesion_z_offset="0" -s wireframe_roof_outer_delay="0.2" -s ironing_inset="0.2" -s bridge_fan_speed_3="0" -s initial_layer_line_width_factor="100.0" -s machine_start_gcode="" -s experimental="0" -s bridge_wall_min_length="5" -s prime_tower_position_x="195.6" -s wipe_retraction_amount="6.5" -s material_break_temperature="50" -s top_bottom_extruder_nr="-1" -s acceleration_support_roof="3000" -s support_roof_offset="0.0" -s wall_0_material_flow="100" -s wireframe_flow_flat="100" -s speed_print_layer_0="30.0" -s default_material_bed_temperature="60" -s raft_jerk="20" -s machine_end_gcode="" -s machine_center_is_zero="False" -s support_conical_enabled="False" -s material_anti_ooze_retraction_speed="5" -s machine_head_with_fans_polygon="[[-20, 10], [10, 10], [10, -10], [10, -10]]" -s z_seam_corner="z_seam_corner_inner" -s support_interface_angles="[ ]" -s bottom_thickness="0.8" -s raft_interface_line_spacing="1.0" -s material_flush_purge_length="60" -s machine_nozzle_heat_up_speed="2.0" -s cool_fan_speed_min="100.0" -s wipe_move_distance="20" -s bridge_skin_speed_3="15.0" -s magic_fuzzy_skin_point_dist="0.8" -s filter_out_tiny_gaps="True" -s spaghetti_flow="20" -s machine_heated_build_volume="False" -s extruder_prime_pos_abs="False" -s material_adhesion_tendency="10" -s infill_sparse_thickness="0.1" -s speed_wall_0="30.0" -s machine_extruders_share_heater="False" -s cool_lift_head="False" -s zig_zaggify_infill="False" -s acceleration_enabled="False" -s support_roof_extruder_nr="0" -s layer_start_x="0.0" -s machine_min_cool_heat_time_window="50.0" -s multiple_mesh_overlap="0.15" -s wipe_retraction_retract_speed="25" -s support_bottom_pattern="concentric" -s material_break_preparation_speed="2" -s acceleration_support_bottom="3000" -s material_end_of_filament_purge_length="20" -s wireframe_roof_drag_along="0.8" -s support_bottom_line_distance="0.4" -s wall_min_flow="0" -s ironing_flow="10.0" -s acceleration_prime_tower="3000" -s retraction_hop_after_extruder_switch_height="1" -s skirt_gap="3" -s speed_ironing="20.0" -s machine_max_acceleration_e="10000" -s line_width="0.4" -s zig_zaggify_support="False" -s wipe_hop_enable="False" -s optimize_wall_printing_order="False" -s raft_interface_line_width="0.8" -s gantry_height="180" -s material_surface_energy="100" -s print_bed_temperature="64" -s magic_mesh_surface_mode="normal" -s raft_fan_speed="0" -s wireframe_up_half_speed="0.3" -s machine_max_feedrate_e="299792458000" -s spaghetti_infill_stepped="True" -s raft_surface_fan_speed="0" -s meshfix_union_all_remove_holes="False" -s speed_wall_x="60.0" -s raft_base_jerk="20" -s machine_extruder_count="1" -s jerk_support_roof="20" -s wireframe_top_delay="0" -s machine_endstop_positive_direction_y="False" -s jerk_topbottom="20" -s remove_empty_first_layers="True" -s support_bottom_height="1" -s raft_acceleration="3000" -s jerk_print_layer_0="20" -s wireframe_roof_inset="3" -s material_anti_ooze_retracted_position="-4" -s expand_skins_expand_distance="0.8" -s bridge_wall_speed="15.0" -s support_bottom_offset="0.0" -s wireframe_flat_delay="0.1" -s machine_nozzle_expansion_angle="45" -s brim_line_count="20" -s support_roof_line_distance="0.4" -s prime_tower_line_width="0.4" -s infill_line_width="0.4" -s magic_fuzzy_skin_outside_only="False" -s speed_equalize_flow_max="150" -s jerk_roofing="20" -s raft_base_line_width="0.8" -s coasting_enable="False" -s support_interface_line_width="0.4" -s support_bottom_angles="[ ]" -s support_skip_zag_per_mm="20" -s support_extruder_nr_layer_0="0" -s meshfix_maximum_travel_resolution="0.8" -s cool_min_speed="10" -s machine_disallowed_areas="[]" -s support_interface_enable="False" -s bridge_skin_density_3="80" -s machine_max_feedrate_z="299792458000" -s support_roof_density="100" -s spaghetti_max_height="2.0" -s skirt_line_count="4" -s retraction_count_max="90" -s retraction_extrusion_window="6.5" -s support_fan_enable="False" -s support_roof_pattern="concentric" -s support_mesh="False" -s wireframe_straight_before_down="20" -s material_print_temperature="210" -s retraction_extra_prime_amount="0" -s wireframe_printspeed="5" -s machine_steps_per_mm_y="50" -s support_tree_branch_diameter="2" -s speed_slowdown_layers="2" -s default_material_print_temperature="210" -s roofing_layer_count="0" -s relative_extrusion="False" -s wall_0_inset="0" -s brim_width="8.0" -s speed_support_infill="60" -s raft_base_line_spacing="1.6" -s max_extrusion_before_wipe="10" -s ironing_pattern="zigzag" -s speed_travel="120" -s support_angle="70" -s raft_base_speed="22.5" -s layer_0_z_overlap="0.15" -s speed_z_hop="10" -s platform_adhesion="0" -s support_bottom_stair_step_width="5.0" -s raft_interface_jerk="20" -s material_shrinkage_percentage="0" -s ironing_line_spacing="0.1" -s skin_line_width="0.4" -s connect_infill_polygons="False" -s wireframe_bottom_delay="0" -s mesh_position_y="0" -s infill_randomize_start_location="False" -s machine_nozzle_head_distance="3" -s support_brim_width="8.0" -s top_layers="8" -s support_infill_sparse_thickness="0.1" -s material_bed_temperature_layer_0="64" -s clean_between_layers="False" -s travel="0" -s material_bed_temp_wait="True" -s raft_airgap="0.3" -s material_flush_purge_speed="0.5" -s support_enable="False" -s prime_tower_enable="False" -s raft_surface_thickness="0.1" -s jerk_skirt_brim="20" -s machine_heat_zone_length="16" -s gradual_infill_step_height="1.5" -s outer_inset_first="False" -s prime_tower_brim_enable="False" -s top_skin_preshrink="0.8" -s top_skin_expand_distance="0.8" -s jerk_print="20" -s mold_roof_height="0.5" -s jerk_ironing="20" -s roofing_angles="[ ]" -s support_top_distance="0.1" -s retraction_hop_after_extruder_switch="True" -s material_linear_advance_factor_skirt_brim="0" -s layer_height_0="0.3" -s switch_extruder_retraction_speeds="20" -s machine_firmware_retract="False" -s meshfix_union_all="True" -s support_z_distance="0.1" -s bridge_settings_enabled="False" -s z_seam_y="200" -s acceleration_layer_0="3000" -s raft_interface_thickness="0.15000000000000002" -s wall_line_count="2" -s magic_fuzzy_skin_point_density="1.25" -s top_bottom_thickness="0.8" -s machine_width="200" -s prime_tower_flow="100" -s acceleration_ironing="3000" -s raft_base_fan_speed="0" -s support_tree_collision_resolution="0.2" -s skin_no_small_gaps_heuristic="False" -s wipe_hop_amount="1" -s support_join_distance="2.0" -s machine_buildplate_type="glass" -s time="17:28:54" -s infill_material_flow="100" -s wireframe_enabled="False" -s material_linear_advance_factor_topbottom="0" -s wipe_retraction_prime_speed="25" -s wipe_pause="0" -s bridge_skin_support_threshold="50" -e0 -s switch_extruder_retraction_speeds="20" -s support_interface_density="100" -s cool_fan_speed="80" -s raft_base_thickness="0.36" -s machine_nozzle_offset_x="0" -s initial_layer_line_width_factor="100.0" -s bridge_skin_material_flow="60" -s material_end_of_filament_purge_speed="0.5" -s retraction_retract_speed="65" -s speed_layer_0="12" -s infill="0" -s small_feature_speed_factor="50" -s support_infill_sparse_thickness="0.1" -s speed_prime_tower="60" -s support_brim_enable="False" -s infill_multiplier="1" -s gradual_support_infill_steps="0" -s infill_sparse_density="20" -s bottom_skin_expand_distance="1.6" -s machine_nozzle_cool_down_speed="2.0" -s infill_offset_x="0" -s limit_support_retractions="True" -s machine_extruder_end_pos_x="0" -s infill_offset_y="0" -s acceleration_print_layer_0="3000" -s wall_min_flow_retract="False" -s speed_support_roof="40.0" -s xy_offset_layer_0="0" -s z_seam_position="back" -s material_guid="0ff92885-617b-4144-a03c-9989872454bc" -s material_linear_advance_factor_support_interface="0" -s material_linear_advance_factor_infill="0" -s material_break_preparation_speed="2" -s acceleration_support_bottom="3000" -s material_end_of_filament_purge_length="20" -s gradual_support_infill_step_height="1" -s support_conical_angle="30" -s raft_surface_acceleration="3000" -s support_roof_pattern="concentric" -s jerk_layer_0="20" -s support_pattern="lines" -s jerk_infill="20" -s speed_equalize_flow_enabled="False" -s top_thickness="0.8" -s bottom_skin_preshrink="1.6" -s raft_surface_line_spacing="0.4" -s skin_edge_support_layers="0" -s wall_line_width="0.4" -s xy_offset="0" -s travel_avoid_other_parts="True" -s raft_interface_speed="22.5" -s travel_avoid_distance="0.625" -s support_interface_height="1" -s wipe_move_distance="20" -s cool_fan_speed_min="80" -s acceleration_skirt_brim="3000" -s meshfix="0" -s support_bottom_material_flow="100" -s acceleration_wall="3000" -s ironing_enabled="False" -s acceleration_travel="5000" -s support_supported_skin_fan_speed="100" -s infill_wall_line_count="0" -s support_wall_count="0" -s skin_edge_support_thickness="0" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s experimental="0" -s support_skip_some_zags="False" -s travel_compensate_overlapping_walls_0_enabled="True" -s support_bottom_line_width="0.4" -s material_flow="100" -s support_offset="0" -s raft_smoothing="5" -s speed_topbottom="30.0" -s wipe_hop_enable="False" -s zig_zaggify_support="False" -s speed_print="60" -s prime_tower_min_volume="6" -s jerk_travel="30" -s material_linear_advance_factor_skirt_brim="0" -s support_tree_branch_diameter="2" -s machine_steps_per_mm_y="50" -s acceleration_support_interface="3000" -s spaghetti_max_infill_angle="10" -s bridge_wall_material_flow="50" -s wipe_hop_speed="10" -s jerk_wall_0="20" -s retraction_hop="1" -s wipe_pause="0" -s wipe_retraction_prime_speed="65" -s minimum_support_area="0.0" -s material_linear_advance_factor_wall_0="0" -s wall_0_wipe_dist="0.2" -s switch_extruder_extra_prime_amount="0" -s support_tower_maximum_supported_diameter="3.0" -s spaghetti_infill_extra_volume="0" -s support_connect_zigzags="True" -s support_xy_distance_overhang="0.2" -s bridge_skin_density_3="80" -s support_interface_enable="False" -s resolution="0" -s support_line_width="0.4" -s material_break_preparation_retracted_position="-16" -s support_xy_overrides_z="z_overrides_xy" -s min_infill_area="0" -s machine_nozzle_tip_outer_diameter="1" -s machine_steps_per_mm_x="50" -s infill_angles="[ ]" -s minimum_interface_area="1.0" -s skirt_brim_line_width="0.4" -s top_bottom_pattern="lines" -s cool_fan_full_layer="2" -s center_object="False" -s spaghetti_inset="0.2" -s gradual_infill_steps="0" -s jerk_travel_layer_0="30.0" -s mold_enabled="False" -s raft_surface_line_width="0.4" -s cooling="0" -s support_tree_collision_resolution="0.2" -s raft_base_fan_speed="0" -s material_print_temperature_layer_0="220" -s raft_interface_line_spacing="1.0" -s machine_nozzle_heat_up_speed="2.0" -s material_flush_purge_length="60" -s bridge_skin_material_flow_2="100" -s speed_support_interface="40.0" -s support_interface_offset="0.0" -s jerk_support="20" -s wall_line_width_x="0.4" -s support_line_distance="2.6666666666666665" -s retraction_enable="True" -s switch_extruder_retraction_speed="20" -s retraction_hop_enabled="False" -s acceleration_roofing="3000" -s cool_min_layer_time_fan_speed_max="10" -s wipe_retraction_speed="65" -s retraction_amount="2.5" -s raft_speed="30.0" -s mold_angle="40" -s material_flow_layer_0="100" -s wall_material_flow="100" -s bridge_skin_material_flow_3="110" -s bridge_fan_speed_2="0" -s initial_bottom_layers="6" -s support_interface_pattern="concentric" -s connect_skin_polygons="False" -s infill_pattern="concentric" -s material_flow_dependent_temperature="False" -s bottom_layers="6" -s magic_fuzzy_skin_thickness="0.3" -s meshfix_extensive_stitching="False" -s infill_wipe_dist="0.1" -s machine_extruder_start_pos_abs="False" -s skirt_brim_material_flow="100" -s bridge_skin_speed="15.0" -s jerk_wall_x="20" -s wipe_retraction_amount="2.5" -s material_break_temperature="50" -s support_roof_height="1.2" -s magic_fuzzy_skin_enabled="False" -s connect_infill_polygons="False" -s machine_extruder_start_code="" -s support_material_flow="100" -s bridge_fan_speed="100" -s bridge_sparse_infill_max_density="0" -s wall_thickness="0.8" -s support_bottom_distance="0" -s material_crystallinity="False" -s machine_steps_per_mm_e="1600" -s jerk_wall="20" -s dual="0" -s support_bottom_enable="False" -s skin_overlap="5" -s speed_infill="60" -s machine_nozzle_id="unknown" -s wipe_brush_pos_x="100" -s acceleration_travel_layer_0="5000.0" -s raft_surface_layers="2" -s skirt_brim_minimal_length="250" -s material_linear_advance_factor="0" -s cool_min_layer_time="5" -s wipe_retraction_enable="True" -s travel_avoid_supports="False" -s acceleration_infill="3000" -s speed_ironing="20.0" -s support_roof_line_width="0.4" -s extruder_prime_pos_y="0" -s material_linear_advance_factor_prime_tower="0" -s retraction_prime_speed="65" -s z_seam_type="random" -s prime_blob_enable="False" -s meshfix_keep_open_polygons="False" -s raft_surface_speed="30.0" -s infill_enable_travel_optimization="False" -s machine_nozzle_temp_enabled="True" -s switch_extruder_retraction_amount="16" -s skirt_brim_speed="12" -s material_maximum_park_duration="300" -s infill_material_flow="100" -s support_use_towers="True" -s infill_support_enabled="False" -s cool_fan_speed_0="0" -s support_brim_line_count="20" -s blackmagic="0" -s multiple_mesh_overlap="0.15" -s wipe_retraction_retract_speed="65" -s material_linear_advance_factor_wall_x="0" -s acceleration_print="3000" -s support_bottom_pattern="concentric" -s meshfix_maximum_deviation="0.05" -s cool_fan_enabled="True" -s wall_overhang_angle="90" -s cool_fan_speed_max="80" -s machine_extruder_end_code="" -s support_roof_angles="[ ]" -s retraction_hop_after_extruder_switch_height="1" -s machine_extruder_end_pos_abs="False" -s support="0" -s spaghetti_infill_enabled="False" -s acceleration_support="3000" -s acceleration_wall_0="3000" -s jerk_support_bottom="20" -s material_extrusion_cool_down_speed="0.7" -s speed_support_bottom="40.0" -s support_conical_min_width="5.0" -s coasting_min_volume="0.8" -s material_linear_advance_factor_wall="0" -s cool_fan_full_at_height="0.3" -s support_infill_angles="[ ]" -s shell="0" -s support_tower_diameter="3.0" -s machine_extruder_start_pos_x="0" -s wipe_hop_amount="1" -s support_join_distance="2.0" -s support_tree_angle="40" -s fill_perimeter_gaps="everywhere" -s prime_tower_wipe_enabled="True" -s machine_heat_zone_length="16" -s jerk_skirt_brim="20" -s raft_jerk="20" -s speed_print_layer_0="12" -s command_line_settings="0" -s material_linear_advance_factor_support="0" -s conical_overhang_angle="50" -s infill_overlap_mm="0" -s mesh_position_z="0" -s speed="0" -s material_diameter="1.75" -s meshfix_union_all_remove_holes="False" -s gradual_infill_step_height="1.5" -s cool_lift_head="False" -s speed_wall_0="30.0" -s outer_inset_first="False" -s extruder_prime_pos_z="0" -s support_tower_roof_angle="65" -s meshfix_maximum_resolution="0.5" -s wipe_repeat_count="5" -s support_tree_branch_distance="1" -s wall_x_material_flow="100" -s min_skin_width_for_expansion="3.67394039744206e-17" -s material_no_load_move_factor="0.940860215" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s max_skin_angle_for_expansion="90" -s top_bottom_pattern_0="lines" -s alternate_extra_perimeter="False" -s support_roof_enable="True" -s slicing_tolerance="exclusive" -s machine_extruder_end_pos_y="0" -s cross_support_density_image="" -s z_seam_relative="False" -s support_xy_distance="0.7" -s speed_wall="30.0" -s material_final_print_temperature="205" -s machine_endstop_positive_direction_x="False" -s bridge_enable_more_layers="True" -s conical_overhang_enabled="False" -s speed_travel_layer_0="30.0" -s fill_outline_gaps="False" -s machine_filament_park_distance="16" -s support_zag_skip_count="8" -s material_break_retracted_position="-50" -s material_initial_print_temperature="210" -s switch_extruder_prime_speed="20" -s extruder_prime_pos_x="0" -s layer_start_y="0.0" -s filter_out_tiny_gaps="True" -s bridge_skin_speed_3="15.0" -s spaghetti_flow="20" -s magic_fuzzy_skin_point_dist="0.8" -s coasting_speed="90" -s skin_material_flow="100" -s support_bottom_density="100" -s acceleration_wall_x="3000" -s skin_overlap_mm="0.02" -s small_feature_max_length="0.0" -s support_initial_layer_line_distance="2.6666666666666665" -s support_bottom_offset="0.0" -s bridge_wall_speed="15.0" -s meshfix_union_all="True" -s support_z_distance="0.1" -s infill_line_distance="2.0" -s minimum_bottom_area="1.0" -s retraction_combing_max_distance="0" -s z_seam_x="100.0" -s expand_skins_expand_distance="1.6" -s mesh_position_x="0" -s wipe_retraction_extra_prime_amount="0" -s jerk_support_roof="20" -s machine_endstop_positive_direction_y="False" -s coasting_volume="0.064" -s machine_endstop_positive_direction_z="True" -s small_feature_speed_factor_0="50" -s infill_support_angle="40" -s raft_surface_jerk="20" -s support_interface_skip_height="0.3" -s mold_width="5" -s infill_before_walls="True" -s material="0" -s jerk_support_infill="20" -s wall_overhang_speed_factor="100" -s jerk_prime_tower="20" -s skin_outline_count="1" -s material_anti_ooze_retraction_speed="5" -s support_conical_enabled="False" -s bridge_skin_speed_2="15.0" -s retract_at_layer_change="False" -s raft_base_jerk="20" -s speed_wall_x="60.0" -s support_roof_material_flow="100" -s bridge_skin_density_2="75" -s brim_replaces_support="True" -s acceleration_support_infill="3000" -s brim_gap="0" -s travel_compensate_overlapping_walls_enabled="True" -s roofing_pattern="lines" -s travel_compensate_overlapping_walls_x_enabled="True" -s wall_line_width_0="0.4" -s cross_infill_pocket_size="2.0" -s raft_margin="15" -s support_bottom_stair_step_height="0.3" -s brim_outside_only="True" -s material_standby_temperature="175" -s speed_roofing="30.0" -s roofing_line_width="0.4" -s speed_support="60" -s ironing_inset="0.2" -s bridge_fan_speed_3="0" -s support_tree_branch_diameter_angle="5" -s support_infill_rate="15" -s infill_randomize_start_location="False" -s mesh_position_y="0" -s wall_line_count="4" -s magic_fuzzy_skin_point_density="1.25" -s platform_adhesion="0" -s support_bottom_stair_step_width="5.0" -s speed_z_hop="10" -s retraction_speed="65" -s wall_0_material_flow="100" -s cool_min_speed="10" -s bridge_skin_density="100" -s raft_base_line_width="0.8" -s machine_nozzle_offset_y="0" -s extruder_nr="0" -s infill_overlap="14" -s support_interface_material_flow="100" -s magic_mesh_surface_mode="normal" -s raft_fan_speed="0" -s raft_interface_line_width="0.8" -s material_surface_energy="100" -s retraction_extrusion_window="2.5" -s support_fan_enable="False" -s machine_extruder_start_pos_y="0" -s extruder_prime_pos_abs="False" -s material_adhesion_tendency="0" -s infill_sparse_thickness="0.1" -s skin_no_small_gaps_heuristic="False" -s machine_nozzle_head_distance="3" -s support_brim_width="8.0" -s top_layers="6" -s material_break_preparation_temperature="220" -s layer_start_x="0.0" -s machine_min_cool_heat_time_window="50.0" -s support_bottom_line_distance="0.4" -s zig_zaggify_infill="False" -s wall_min_flow="0" -s ironing_flow="10.0" -s support_roof_offset="0.0" -s acceleration_support_roof="3000" -s acceleration_prime_tower="3000" -s skirt_gap="3" -s line_width="0.4" -s optimize_wall_printing_order="False" -s raft_acceleration="3000" -s support_bottom_height="1" -s raft_base_acceleration="3000" -s skirt_line_count="4" -s retraction_count_max="90" -s ironing_only_highest_layer="False" -s acceleration_topbottom="3000" -s machine_settings="0" -s small_hole_max_size="0" -s brim_line_count="20" -s support_roof_line_distance="0.4" -s infill_line_width="0.4" -s magic_fuzzy_skin_outside_only="False" -s prime_tower_line_width="0.4" -s jerk_print_layer_0="20" -s material_anti_ooze_retracted_position="-4" -s support_interface_angles="[ ]" -s bottom_thickness="0.8" -s speed_equalize_flow_max="150" -s jerk_roofing="20" -s minimum_roof_area="1.0" -s machine_extruder_cooling_fan_number="0" -s machine_nozzle_size="0.4" -s raft_interface_jerk="20" -s material_shrinkage_percentage="0" -s support_roof_density="100" -s spaghetti_max_height="2.0" -s bridge_skin_support_threshold="50" -s material_linear_advance_factor_topbottom="0" -s material_print_temperature="220" -s retraction_extra_prime_amount="0" -s default_material_print_temperature="200" -s roofing_layer_count="0" -s wall_0_inset="0" -s brim_width="8.0" -s speed_support_infill="60" -s raft_base_line_spacing="1.6" -s max_extrusion_before_wipe="10" -s roofing_material_flow="100" -s prime_tower_flow="100" -s acceleration_ironing="3000" -s raft_interface_acceleration="3000" -s spaghetti_infill_stepped="True" -s raft_surface_fan_speed="0" -s jerk_print="20" -s z_seam_y="200" -s retraction_min_travel="0.8" -s acceleration_layer_0="3000" -s material_break_speed="25" -s ironing_line_spacing="0.1" -s raft_airgap="0.3" -s material_flush_purge_speed="0.5" -s skin_line_width="0.4" -s machine_steps_per_mm_z="50" -s skin_angles="[ ]" -s skin_preshrink="1.6" -s clean_between_layers="False" -s travel="0" -s raft_surface_thickness="0.1" -s top_skin_preshrink="1.6" -s jerk_support_interface="20" -s cross_infill_density_image="" -s support_interface_line_width="0.4" -s support_skip_zag_per_mm="20" -s support_bottom_angles="[ ]" -s ironing_pattern="zigzag" -s speed_travel="150" -s support_angle="70" -s raft_base_speed="22.5" -s layer_0_z_overlap="0.15" -s top_skin_expand_distance="1.6" -s sub_div_rad_add="0.4" -s z_seam_corner="z_seam_corner_inner" -s roofing_angles="[ ]" -s jerk_ironing="20" -s top_bottom_thickness="0.8" -s support_top_distance="0.1" -s retraction_hop_after_extruder_switch="True" -s jerk_topbottom="20" -s bridge_wall_coast="100" -s raft_interface_fan_speed="0" -s raft_interface_thickness="0.15000000000000002" -s meshfix_maximum_travel_resolution="0.8" -s machine_feeder_wheel_diameter="10.0" -s retraction_hop_only_when_collides="False" -s coasting_enable="False" -s mold_roof_height="0.5" -g -e0 -l "0" -s extruder_nr="0"
2020-02-29 17:28:58,590 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 342 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-02-29 17:28:58,816 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 17:28:58,820 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 17:28:58,835 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [663]: Slicing took 4.105823040008545 seconds
2020-02-29 17:28:58,835 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [664]: Number of models per buildplate: {0: 1}
2020-02-29 17:28:58,836 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [678]: See if there is more to slice...
2020-02-29 17:28:59,043 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [181]: Socket state changed to Closing
2020-02-29 17:28:59,046 - DEBUG - [MainThread] UM.Backend.Backend._onSocketError [203]: Socket debug: Arcus Error (13): Closing socket because other side requested close.
2020-02-29 17:28:59,049 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [183]: Socket state changed to Closed
2020-02-29 17:28:59,049 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onBackendQuit [829]: Backend quit with return code 0. Resetting process and socket.
2020-02-29 17:29:13,548 - DEBUG - [MainThread] LinearAdvanceSettingPlugin.LinearAdvanceSettingPlugin._filterGcode [109]: No used extruders specify a linear advance factor
2020-02-29 17:29:13,757 - DEBUG - [MainThread] UM.Controller.setActiveStage [149]: Setting active stage to MonitorStage
2020-02-29 17:29:13,806 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:211: Error: Cannot assign [undefined] to QString
2020-02-29 17:29:13,834 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._processRequest [308]: Request [4150eb0d6cef44798150a3fe5b83cc34] started
2020-02-29 17:29:13,838 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-02-29 17:29:14,484 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestFinished [369]: Request [4150eb0d6cef44798150a3fe5b83cc34] finished.
2020-02-29 17:29:14,487 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-02-29 17:29:14,488 - INFO - [MainThread] SliceInfoPlugin.SliceInfo._onRequestFinished [275]: SliceInfo sent successfully
2020-02-29 17:29:17,394 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-02-29 17:29:23,526 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-02-29 17:29:47,527 - DEBUG - [MainThread] UM.Message._onInactivityTriggered [88]: Hiding message because of inactivity
2020-02-29 17:30:31,563 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [772]: Resource created on OctoPrint instance: http://192.168.2.162/api/files/local/WDI3P_screw_box_bottom.gcode
2020-02-29 17:31:01,529 - DEBUG - [MainThread] UM.Message._onInactivityTriggered [88]: Hiding message because of inactivity
2020-02-29 18:18:43,061 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Orange Leader"._octoprint._tcp.local
2020-02-29 18:18:43,065 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Blue Leader"._octoprint._tcp.local
2020-02-29 18:18:43,065 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Darth Pooky"._octoprint._tcp.local
2020-02-29 19:33:44,511 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Orange Leader"._octoprint._tcp.local
2020-02-29 19:33:44,513 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Blue Leader"._octoprint._tcp.local
2020-02-29 19:33:44,514 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Darth Pooky"._octoprint._tcp.local
2020-02-29 19:47:13,560 - DEBUG - [MainThread] UM.Controller.setActiveStage [149]: Setting active stage to PrepareStage
2020-02-29 19:47:13,597 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-02-29 19:47:13,665 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 19:47:13,669 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 19:47:13,678 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/plugins/plugins/PrepareStage/PrepareMain.qml:16:5: QML ActionPanelWidget: Binding loop detected for property "width"
2020-02-29 19:47:13,695 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:79: ReferenceError: stop is not defined
2020-02-29 19:47:13,699 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:63: TypeError: Cannot read property of null
2020-02-29 19:47:13,701 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:91: TypeError: Cannot read property of null
2020-02-29 19:47:13,704 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:102: TypeError: Cannot read property of null
2020-02-29 19:47:13,707 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:103: TypeError: Cannot read property of null
2020-02-29 19:47:13,710 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:139: TypeError: Cannot read property of null
2020-02-29 19:47:13,712 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:140: TypeError: Cannot read property of null
2020-02-29 19:47:13,715 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:120: TypeError: Cannot read property of null
2020-02-29 19:47:13,717 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:122: TypeError: Cannot read property of null
2020-02-29 19:47:13,719 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-02-29 19:47:13,722 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:36: TypeError: Cannot read property of null
2020-02-29 19:47:13,724 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:37: TypeError: Cannot read property of null
2020-02-29 19:47:13,727 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:49: TypeError: Cannot read property of null
2020-02-29 19:47:13,729 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:59: TypeError: Cannot read property of null
2020-02-29 19:47:13,731 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:61: TypeError: Cannot read property of null
2020-02-29 19:47:13,734 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:63: TypeError: Cannot read property of null
2020-02-29 19:47:13,736 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ExtruderBox.qml:20: TypeError: Cannot read property of null
2020-02-29 19:47:13,739 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:29: TypeError: Cannot read property of null
2020-02-29 19:47:13,741 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:30: TypeError: Cannot read property of null
2020-02-29 19:47:13,743 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:40: TypeError: Cannot read property of null
2020-02-29 19:47:13,745 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:73: TypeError: Cannot read property of null
2020-02-29 19:47:13,748 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:135: TypeError: Cannot read property of null
2020-02-29 19:47:13,750 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:246: TypeError: Cannot read property of null
2020-02-29 19:47:13,752 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:247: TypeError: Cannot read property of null
2020-02-29 19:47:13,755 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:173: TypeError: Cannot read property of null
2020-02-29 19:47:13,757 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:175: TypeError: Cannot read property of null
2020-02-29 19:47:13,760 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:190: TypeError: Cannot read property of null
2020-02-29 19:47:13,762 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:193: TypeError: Cannot read property of null
2020-02-29 19:47:13,765 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:60: TypeError: Cannot read property of null
2020-02-29 19:47:13,768 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:248: TypeError: Cannot read property of null
2020-02-29 19:47:13,770 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:294: TypeError: Cannot read property of null
2020-02-29 19:47:13,773 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:26: TypeError: Cannot read property of null
2020-02-29 19:47:13,775 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:27: TypeError: Cannot read property of null
2020-02-29 19:47:13,779 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:388: TypeError: Cannot read property of null
2020-02-29 19:47:13,781 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:390: TypeError: Cannot read property of null
2020-02-29 19:47:13,783 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:391: TypeError: Cannot read property of null
2020-02-29 19:47:13,786 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:26: TypeError: Cannot read property of null
2020-02-29 19:47:13,788 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:27: TypeError: Cannot read property of null
2020-02-29 19:47:13,791 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:24: TypeError: Cannot read property of null
2020-02-29 19:47:13,793 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:30: TypeError: Cannot read property of null
2020-02-29 19:47:13,795 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:39: TypeError: Cannot read property of null
2020-02-29 19:47:13,798 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:24: TypeError: Cannot read property of null
2020-02-29 19:47:13,800 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:30: TypeError: Cannot read property of null
2020-02-29 19:47:13,803 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:39: TypeError: Cannot read property of null
2020-02-29 19:47:13,805 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:24: TypeError: Cannot read property of null
2020-02-29 19:47:13,808 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:30: TypeError: Cannot read property of null
2020-02-29 19:47:13,810 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:39: TypeError: Cannot read property of null
2020-02-29 19:47:13,812 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupTooltip.qml:67: TypeError: Cannot read property of null
2020-02-29 19:47:13,815 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupTooltip.qml:69: TypeError: Cannot read property of null
2020-02-29 19:47:13,817 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupTooltip.qml:71: TypeError: Cannot read property of null
2020-02-29 19:47:13,820 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:150: TypeError: Cannot read property of null
2020-02-29 19:47:13,822 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-02-29 19:47:13,825 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:166: TypeError: Cannot read property of null
2020-02-29 19:47:13,828 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:167: TypeError: Cannot read property of null
2020-02-29 19:47:13,872 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:178: TypeError: Cannot read property of null
2020-02-29 19:47:13,875 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:231: TypeError: Cannot read property of null
2020-02-29 19:47:13,902 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:241: TypeError: Cannot read property of null
2020-02-29 19:47:19,807 - INFO - [MainThread] UM.Controller.deleteAllNodesWithMeshData [386]: Clearing scene
2020-02-29 19:47:19,817 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 19:47:19,822 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 19:47:19,835 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: GroupedOp.(#=1) <UM.Operations.RemoveSceneNodeOperation.RemoveSceneNodeOperation object at 0x6000187928d8>, took 5ms
2020-02-29 19:47:19,838 - INFO - [MainThread] cura.CuraApplication._removeNodesWithLayerData [1900]: Clearing scene
2020-02-29 19:47:20,614 - WARNING - [MainThread] cura.UI.PrintInformation.setBaseName [360]: Unsupported Mime Type Database file extension 
2020-02-29 19:47:23,679 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-02-29 19:47:35,585 - INFO - [Thread-4] STLReader.STLReader.load_file [51]: Using NumPy-STL to load STL data.
2020-02-29 19:47:35,592 - DEBUG - [Thread-4] UM.Mesh.MeshData.calculateNormalsFromVertices [495]: Calculating normals took 0.00019788742065429688 seconds
2020-02-29 19:47:35,593 - DEBUG - [Thread-4] STLReader.STLReader._read [102]: Loaded a mesh with 180 vertices
2020-02-29 19:47:35,598 - DEBUG - [Thread-4] UM.Mesh.MeshData.approximateConvexHull [452]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.0013930797576904297 seconds. 10 input vertices. 10 output vertices.
2020-02-29 19:47:35,602 - DEBUG - [Thread-4] UM.FileHandler.ReadFileJob.run [71]: Loading file took 0.0 seconds
2020-02-29 19:47:35,607 - DEBUG - [Thread-4] UM.Mesh.MeshData.approximateConvexHull [452]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.0010819435119628906 seconds. 10 input vertices. 10 output vertices.
2020-02-29 19:47:35,628 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: <UM.Operations.AddSceneNodeOperation.AddSceneNodeOperation object at 0x600018271a98>, took 3ms
2020-02-29 19:47:41,750 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._terminate [292]: Attempting to kill the engine process
2020-02-29 19:47:41,756 - DEBUG - [MainThread] UM.Backend.Backend._createSocket [213]: Previous socket existed. Closing that first.
2020-02-29 19:47:41,765 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [173]: Socket state changed to Listening
2020-02-29 19:47:41,808 - INFO - [MainThread] UM.Backend.Backend.startEngine [81]: Started engine process: /Applications/Ultimaker Cura 3.app/Contents/MacOS/CuraEngine
2020-02-29 19:47:41,811 - DEBUG - [MainThread] UM.Backend.Backend._backendLog [101]: [Backend] Calling engine with: ['/Applications/Ultimaker Cura 3.app/Contents/MacOS/CuraEngine', 'connect', '127.0.0.1:49674', '']
2020-02-29 19:47:41,815 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-02-29 19:47:41,818 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [177]: Socket state changed to Connected
2020-02-29 19:47:41,822 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] Cura_SteamEngine version 4.5.0
2020-02-29 19:47:41,824 - DEBUG - [MainThread] UM.Backend.Backend._onSocketStateChanged [167]: Backend connected on port 49674
2020-02-29 19:47:41,828 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] Copyright (C) 2019 Ultimaker
2020-02-29 19:47:41,831 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-02-29 19:47:41,834 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] This program is free software: you can redistribute it and/or modify
2020-02-29 19:47:41,837 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] it under the terms of the GNU Affero General Public License as published by
2020-02-29 19:47:41,840 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] the Free Software Foundation, either version 3 of the License, or
2020-02-29 19:47:41,842 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] (at your option) any later version.
2020-02-29 19:47:41,846 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-02-29 19:47:41,850 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] This program is distributed in the hope that it will be useful,
2020-02-29 19:47:41,854 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] but WITHOUT ANY WARRANTY; without even the implied warranty of
2020-02-29 19:47:41,858 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
2020-02-29 19:47:41,863 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'JST Join Jig.stl'>,rot.=Q<0.13052619222005157,0.0,0.0,w=0.9914448613738104>), took 15ms
2020-02-29 19:47:41,863 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] GNU Affero General Public License for more details.
2020-02-29 19:47:41,867 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-02-29 19:47:41,875 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] You should have received a copy of the GNU Affero General Public License
2020-02-29 19:47:41,879 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] along with this program.  If not, see <http://www.gnu.org/licenses/>.
2020-02-29 19:47:41,948 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'JST Join Jig.stl'>,rot.=Q<0.6087614290087207,0.0,0.0,w=0.7933533402912353>), took 2ms
2020-02-29 19:47:42,056 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'JST Join Jig.stl'>,rot.=Q<0.13052619222005157,0.0,0.0,w=0.9914448613738104>), took 2ms
2020-02-29 19:47:42,166 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'JST Join Jig.stl'>,rot.=Q<0.13052619222005157,0.0,0.0,w=0.9914448613738104>), took 3ms
2020-02-29 19:47:42,270 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'JST Join Jig.stl'>,rot.=Q<0.13052619222005157,0.0,0.0,w=0.9914448613738104>), took 2ms
2020-02-29 19:47:42,399 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'JST Join Jig.stl'>,rot.=Q<0.13052619222005157,0.0,0.0,w=0.9914448613738104>), took 2ms
2020-02-29 19:47:42,499 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'JST Join Jig.stl'>,rot.=Q<0.13052619222005157,0.0,0.0,w=0.9914448613738104>), took 2ms
2020-02-29 19:47:42,615 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'JST Join Jig.stl'>,rot.=Q<0.13052619222005157,0.0,0.0,w=0.9914448613738104>), took 3ms
2020-02-29 19:47:42,732 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'JST Join Jig.stl'>,rot.=Q<0.13052619222005157,0.0,0.0,w=0.9914448613738104>), took 3ms
2020-02-29 19:47:43,485 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'JST Join Jig.stl'>,rot.=Q<-0.13052619222005157,-0.0,-0.0,w=0.9914448613738104>), took 2ms
2020-02-29 19:47:45,679 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-02-29 19:47:48,221 - INFO - [MainThread] cura.UI.MachineActionManager.addDefaultMachineActions [56]: Default machine actions have been added for machine definition [wanhao_i3plus], do nothing.
2020-02-29 19:47:48,230 - WARNING - [MainThread] cura.Settings.GlobalStack.addExtruder [179]: Extruder [wanhao_i3plus_extruder_0 #3] has already been added to this stack [GreyLeader]
2020-02-29 19:47:48,232 - WARNING - [MainThread] cura.Settings.ExtruderManager.registerExtruder [156]: Extruder [wanhao_i3plus_extruder_0 #3] has already been registered on machine [GreyLeader], not doing anything
2020-02-29 19:47:48,235 - INFO - [MainThread] UM.Logger.info [112]: Initializing Active Machine...
2020-02-29 19:47:48,370 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-02-29 19:47:48,384 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device GreyLeader already added
2020-02-29 19:47:48,387 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device GreyLeader already added
2020-02-29 19:47:48,390 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device GreyLeader already added
2020-02-29 19:47:48,392 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device GreyLeader already added
2020-02-29 19:47:48,394 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [303]: Connection with instance GreyLeader with url http://192.168.2.156:80/ started
2020-02-29 19:47:48,398 - WARNING - [MainThread] UM.OutputDevice.OutputDeviceManager.removeOutputDevice [179]: Could not find output device with id OrangeLeader to remove
2020-02-29 19:47:48,409 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/SettingsMenu.qml:51: TypeError: Cannot read property 'isEnabled' of undefined
2020-02-29 19:47:48,411 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/SettingsMenu.qml:44: TypeError: Cannot read property 'isEnabled' of undefined
2020-02-29 19:47:48,415 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/MaterialMenu.qml:26: TypeError: Cannot read property 'isEnabled' of undefined
2020-02-29 19:47:48,418 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/MaterialMenu.qml:28: TypeError: Cannot read property 'material' of undefined
2020-02-29 19:47:48,421 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-02-29 19:47:48,484 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-02-29 19:47:48,502 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-02-29 19:47:48,505 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-02-29 19:47:49,042 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device GreyLeader already added
2020-02-29 19:47:49,044 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device GreyLeader already added
2020-02-29 19:47:49,047 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device GreyLeader already added
2020-02-29 19:47:49,049 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device GreyLeader already added
2020-02-29 19:47:49,051 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device GreyLeader already added
2020-02-29 19:47:49,101 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [135]: New error check scheduled.
2020-02-29 19:47:49,691 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-02-29 19:47:49,700 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [63]: Updating QualityProfilesDropDownMenuModel.
2020-02-29 19:47:50,153 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [741]: Set OctoPrint camera url to http://192.168.2.156:80/webcam/?action=stream
2020-02-29 19:47:50,224 - INFO - [MainThread] cura.Machines.MachineErrorChecker._setResult [187]: Error check finished, result = False, time = 1.1s
2020-02-29 19:47:50,859 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [225]: Starting to slice...
2020-02-29 19:47:50,859 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [243]: Going to slice build plate [0]!
2020-02-29 19:47:51,167 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onStartSliceCompleted [429]: Sending slice message took 0.30751800537109375 seconds
2020-02-29 19:47:51,340 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING]  -s extruders_enabled_count="1" -s support_interface_density="100" -s cool_fan_speed="100.0" -s raft_base_thickness="0.36" -s bridge_skin_material_flow="60" -s slicing_tolerance="middle" -s material_end_of_filament_purge_speed="0.5" -s prime_tower_size="20" -s retraction_retract_speed="25" -s speed_layer_0="30.0" -s infill="0" -s small_feature_speed_factor="50" -s speed_prime_tower="60" -s support_brim_enable="False" -s infill_multiplier="1" -s gradual_support_infill_steps="0" -s initial_extruder_nr="0" -s infill_extruder_nr="-1" -s infill_sparse_density="20" -s bottom_skin_expand_distance="0.8" -s machine_nozzle_cool_down_speed="2.0" -s infill_offset_x="0" -s machine_depth="190" -s adhesion_z_offset_extensive_processing="False" -s limit_support_retractions="True" -s machine_max_acceleration_y="9000" -s infill_offset_y="0" -s acceleration_print_layer_0="3000" -s wall_min_flow_retract="False" -s speed_support_roof="20.0" -s xy_offset_layer_0="0" -s adhesion_type="skirt" -s z_seam_position="back" -s material_guid="" -s magic_spiralize="False" -s material_linear_advance_factor_support_interface="0" -s machine_max_acceleration_x="9000" -s material_linear_advance_factor_infill="0" -s print_temperature="210" -s skin_angles="[ ]" -s gradual_support_infill_step_height="1" -s support_conical_angle="30" -s raft_surface_acceleration="3000" -s jerk_layer_0="20" -s machine_max_feedrate_x="299792458000" -s support_pattern="lines" -s jerk_infill="20" -s speed_equalize_flow_enabled="False" -s top_thickness="0.8" -s bottom_skin_preshrink="0.8" -s raft_surface_line_spacing="0.4" -s wall_line_width="0.4" -s xy_offset="0" -s alternate_carve_order="True" -s travel_avoid_other_parts="True" -s raft_interface_speed="22.5" -s travel_avoid_distance="0.625" -s support_interface_height="1" -s jerk_travel_layer_0="30.0" -s date="29-02-2020" -s wireframe_flow="100" -s machine_acceleration="4000" -s machine_minimum_feedrate="0.0" -s skin_preshrink="0.8" -s jerk_wall="20" -s retract_at_layer_change="False" -s jerk_travel="30" -s support_skip_some_zags="False" -s minimum_roof_area="1.0" -s wireframe_flow_connection="100" -s bridge_skin_density="100" -s skirt_brim_line_width="0.4" -s top_bottom_pattern="lines" -s travel_compensate_overlapping_walls_0_enabled="True" -s flow_rate_max_extrusion_offset="0" -s material_diameter="2.85" -s support_bottom_line_width="0.4" -s raft_smoothing="5" -s speed_topbottom="30.0" -s wireframe_drag_along="0.6" -s material_break_speed="25" -s raft_interface_acceleration="3000" -s minimum_polygon_circumference="1.0" -s support_interface_skip_height="0.3" -s speed_print="60" -s skin_edge_support_layers="0" -s support_type="buildplate" -s support_roof_line_width="0.4" -s wireframe_printspeed_bottom="5" -s raft_surface_line_width="0.4" -s prime_tower_min_volume="6" -s prime_blob_enable="False" -s switch_extruder_prime_speed="20" -s wall_x_extruder_nr="-1" -s machine_steps_per_mm_z="50" -s smooth_spiralized_contours="True" -s ooze_shield_dist="2" -s bridge_wall_material_flow="50" -s cool_fan_full_layer="2" -s roofing_material_flow="100" -s wipe_hop_speed="10" -s infill_angles="[ ]" -s infill_line_distance="4.0" -s minimum_bottom_area="1.0" -s minimum_support_area="0.0" -s material_linear_advance_factor_wall_0="0" -s wall_0_wipe_dist="0.2" -s switch_extruder_extra_prime_amount="0" -s material_extrusion_cool_down_speed="0.7" -s wall_x_material_flow="100" -s support_xy_distance_overhang="0.2" -s wireframe_printspeed_up="5" -s resolution="0" -s retraction_hop="1" -s jerk_wall_0="20" -s skin_material_flow="100" -s support_bottom_density="100" -s jerk_support_interface="20" -s material_print_temperature_layer_0="210" -s retraction_min_travel="0.8" -s support_xy_overrides_z="z_overrides_xy" -s min_infill_area="0" -s machine_nozzle_tip_outer_diameter="1" -s machine_steps_per_mm_x="50" -s material_break_preparation_temperature="210" -s machine_nozzle_size="0.4" -s support_initial_layer_line_distance="0" -s center_object="False" -s spaghetti_inset="0.2" -s mold_enabled="False" -s acceleration_travel="5000" -s acceleration_wall="3000" -s support_bottom_material_flow="100" -s ironing_enabled="False" -s cooling="0" -s support_infill_angles="[ ]" -s shell="0" -s bridge_skin_material_flow_2="100" -s speed_support_interface="40.0" -s meshfix="0" -s acceleration_skirt_brim="3000" -s support_line_distance="0" -s retraction_enable="True" -s retraction_hop_enabled="False" -s switch_extruder_retraction_speed="20" -s acceleration_roofing="3000" -s anti_overhang_mesh="False" -s cool_min_layer_time_fan_speed_max="10" -s wipe_retraction_speed="25" -s retraction_amount="6.5" -s retraction_combing="all" -s material_flow_layer_0="100" -s wall_material_flow="100" -s extruder_prime_pos_z="0" -s support_tower_roof_angle="65" -s connect_skin_polygons="False" -s infill_pattern="grid" -s magic_fuzzy_skin_thickness="0.3" -s meshfix_extensive_stitching="False" -s infill_wipe_dist="0.1" -s skirt_brim_material_flow="100" -s bridge_skin_speed="15.0" -s mesh_position_x="0" -s prime_tower_position_y="165.6" -s jerk_wall_x="20" -s support_bottom_extruder_nr="0" -s support_roof_height="1.2" -s cutting_mesh="False" -s machine_max_jerk_xy="20.0" -s support_material_flow="100" -s bridge_fan_speed="100" -s support_line_width="0.4" -s ooze_shield_enabled="False" -s support_extruder_nr="0" -s wall_thickness="0.8" -s support_bottom_distance="0" -s material_crystallinity="False" -s machine_steps_per_mm_e="1600" -s dual="0" -s support_bottom_enable="False" -s wireframe_nozzle_clearance="1" -s speed_infill="60" -s machine_nozzle_id="unknown" -s wipe_brush_pos_x="100" -s acceleration_travel_layer_0="5000.0" -s meshfix_maximum_deviation="0.05" -s cool_fan_enabled="True" -s wall_overhang_angle="90" -s cool_fan_speed_max="100.0" -s raft_surface_layers="2" -s skirt_brim_minimal_length="250" -s material_linear_advance_factor="0" -s cool_min_layer_time="5" -s day="Sat" -s wipe_retraction_enable="True" -s travel_avoid_supports="False" -s acceleration_infill="3000" -s material_bed_temperature="66" -s bridge_skin_material_flow_3="110" -s bridge_fan_speed_2="0" -s initial_bottom_layers="8" -s support_interface_pattern="concentric" -s cross_infill_density_image="" -s adaptive_layer_height_variation="0.1" -s infill_wall_line_count="0" -s support_supported_skin_fan_speed="100" -s extruder_prime_pos_y="0" -s machine_name="Wanhao Duplicator i3 Plus" -s retraction_prime_speed="25" -s material_linear_advance_factor_prime_tower="0" -s z_seam_type="sharpest_corner" -s meshfix_keep_open_polygons="False" -s support_use_towers="True" -s infill_support_enabled="False" -s cool_fan_speed_0="0" -s support_brim_line_count="20" -s blackmagic="0" -s material_print_temp_wait="True" -s support_roof_angles="[ ]" -s infill_mesh_order="0" -s support="0" -s spaghetti_infill_enabled="False" -s acceleration_support="3000" -s support_interface_offset="0.0" -s support_tree_enable="True" -s acceleration_wall_0="3000" -s wireframe_top_jump="0.6" -s jerk_support_bottom="20" -s speed_support_bottom="20.0" -s support_conical_min_width="5.0" -s bottom_layers="8" -s material_flow_dependent_temperature="False" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s support_wall_count="1" -s machine_max_acceleration_z="100" -s skin_edge_support_thickness="0" -s coasting_min_volume="0.8" -s material_linear_advance_factor_wall="0" -s cool_fan_full_at_height="0.3" -s draft_shield_dist="10" -s layer_height="0.1" -s material_break_preparation_retracted_position="-16" -s infill_mesh="False" -s mold_angle="40" -s raft_speed="30.0" -s machine_max_jerk_z="0.4" -s support_tree_angle="40" -s wall_line_width_0="0.4" -s cross_infill_pocket_size="4.0" -s machine_max_jerk_e="5.0" -s raft_margin="15" -s raft_surface_speed="30.0" -s infill_enable_travel_optimization="False" -s machine_height="180" -s travel_retract_before_outer_wall="False" -s infill_support_angle="40" -s adaptive_layer_height_variation_step="0.01" -s raft_surface_jerk="20" -s bridge_sparse_infill_max_density="0" -s wireframe_printspeed_flat="5" -s draft_shield_height_limitation="full" -s magic_fuzzy_skin_enabled="False" -s jerk_enabled="False" -s support_mesh_drop_down="True" -s wireframe_roof_fall_down="2" -s wireframe_strategy="compensate" -s machine_gcode_flavor="RepRap (Marlin/Sprinter)" -s conical_overhang_angle="50" -s infill_overlap_mm="0.04" -s mesh_position_z="0" -s travel_speed="120" -s speed="0" -s small_hole_max_size="0" -s material_bed_temp_prepend="True" -s material="0" -s infill_before_walls="True" -s meshfix_maximum_resolution="0.5" -s wipe_repeat_count="5" -s support_tree_branch_distance="1" -s retraction_speed="25" -s gradual_infill_steps="0" -s machine_show_variants="False" -s support_interface_material_flow="100" -s infill_overlap="10" -s jerk_support="20" -s wall_line_width_x="0.4" -s roofing_extruder_nr="-1" -s raft_base_acceleration="3000" -s wall_extruder_nr="-1" -s adaptive_layer_height_threshold="0.2" -s min_skin_width_for_expansion="4.898587196589413e-17" -s material_no_load_move_factor="0.940860215" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s max_skin_angle_for_expansion="90" -s sub_div_rad_add="0.4" -s support_tree_branch_diameter_angle="5" -s top_bottom_pattern_0="lines" -s alternate_extra_perimeter="False" -s support_roof_enable="True" -s bridge_wall_coast="100" -s raft_interface_fan_speed="0" -s support_offset="0" -s wireframe_fall_down="0.5" -s material_flow="100" -s cross_support_density_image="" -s wireframe_height="3" -s z_seam_relative="False" -s support_tower_maximum_supported_diameter="3.0" -s support_interface_extruder_nr="0" -s nozzle_disallowed_areas="[]" -s support_xy_distance="0.7" -s speed_wall="30.0" -s bridge_enable_more_layers="True" -s conical_overhang_enabled="False" -s speed_travel_layer_0="60.0" -s draft_shield_height="10" -s z_seam_x="100.0" -s retraction_combing_max_distance="0" -s support_infill_rate="0" -s spaghetti_max_infill_angle="10" -s acceleration_support_interface="3000" -s machine_feeder_wheel_diameter="10.0" -s retraction_hop_only_when_collides="False" -s extruder_prime_pos_x="0" -s build_volume_temperature="28" -s layer_start_y="0.0" -s material_break_retracted_position="-50" -s material_initial_print_temperature="200" -s support_infill_extruder_nr="0" -s coasting_speed="90" -s carve_multiple_volumes="False" -s flow_rate_extrusion_offset_factor="100" -s acceleration_wall_x="3000" -s skin_overlap_mm="0.02" -s small_feature_max_length="0.0" -s wall_0_extruder_nr="-1" -s material_maximum_park_duration="300" -s machine_nozzle_temp_enabled="True" -s switch_extruder_retraction_amount="16" -s skirt_brim_speed="30.0" -s wipe_retraction_extra_prime_amount="0" -s ironing_only_highest_layer="False" -s acceleration_topbottom="3000" -s machine_settings="0" -s adhesion_extruder_nr="0" -s mold_width="5" -s jerk_support_infill="20" -s wall_overhang_speed_factor="100" -s jerk_prime_tower="20" -s skin_outline_count="1" -s bridge_skin_speed_2="15.0" -s machine_max_feedrate_y="299792458000" -s support_roof_material_flow="100" -s bridge_skin_density_2="75" -s support_tower_diameter="3.0" -s material_linear_advance_factor_support="0" -s command_line_settings="0" -s brim_replaces_support="True" -s prime_tower_wipe_enabled="True" -s fill_perimeter_gaps="everywhere" -s skin_overlap="5" -s print_sequence="all_at_once" -s acceleration_support_infill="3000" -s brim_gap="0" -s spaghetti_infill_extra_volume="0" -s support_connect_zigzags="True" -s adaptive_layer_height_enabled="False" -s travel_compensate_overlapping_walls_enabled="True" -s roofing_pattern="lines" -s fill_outline_gaps="False" -s support_zag_skip_count="0" -s machine_filament_park_distance="16" -s acceleration_print="3000" -s material_linear_advance_factor_wall_x="0" -s material_final_print_temperature="195" -s ooze_shield_angle="60" -s machine_endstop_positive_direction_x="False" -s travel_compensate_overlapping_walls_x_enabled="True" -s coasting_volume="0.064" -s machine_endstop_positive_direction_z="True" -s small_feature_speed_factor_0="50" -s machine_shape="rectangular" -s machine_heated_bed="True" -s machine_use_extruder_offset_to_offset_coords="True" -s brim_outside_only="True" -s material_standby_temperature="150" -s support_bottom_stair_step_height="0.3" -s speed_roofing="30.0" -s roofing_line_width="0.4" -s material_print_temp_prepend="True" -s wireframe_printspeed_down="5" -s minimum_interface_area="1.0" -s draft_shield_enabled="False" -s speed_support="60" -s adhesion_z_offset="0" -s wireframe_roof_outer_delay="0.2" -s ironing_inset="0.2" -s bridge_fan_speed_3="0" -s initial_layer_line_width_factor="100.0" -s machine_start_gcode="" -s experimental="0" -s bridge_wall_min_length="5" -s prime_tower_position_x="195.6" -s wipe_retraction_amount="6.5" -s material_break_temperature="50" -s top_bottom_extruder_nr="-1" -s acceleration_support_roof="3000" -s support_roof_offset="0.0" -s wall_0_material_flow="100" -s wireframe_flow_flat="100" -s speed_print_layer_0="30.0" -s default_material_bed_temperature="60" -s raft_jerk="20" -s machine_end_gcode="" -s machine_center_is_zero="False" -s support_conical_enabled="False" -s material_anti_ooze_retraction_speed="5" -s machine_head_with_fans_polygon="[[-20, 10], [10, 10], [10, -10], [-20, -10]]" -s z_seam_corner="z_seam_corner_inner" -s support_interface_angles="[ ]" -s bottom_thickness="0.8" -s raft_interface_line_spacing="1.0" -s material_flush_purge_length="60" -s machine_nozzle_heat_up_speed="2.0" -s cool_fan_speed_min="100.0" -s wipe_move_distance="20" -s bridge_skin_speed_3="15.0" -s magic_fuzzy_skin_point_dist="0.8" -s filter_out_tiny_gaps="True" -s spaghetti_flow="20" -s machine_heated_build_volume="False" -s extruder_prime_pos_abs="False" -s material_adhesion_tendency="10" -s infill_sparse_thickness="0.1" -s speed_wall_0="30.0" -s machine_extruders_share_heater="False" -s cool_lift_head="False" -s zig_zaggify_infill="False" -s acceleration_enabled="False" -s support_roof_extruder_nr="0" -s layer_start_x="0.0" -s machine_min_cool_heat_time_window="50.0" -s multiple_mesh_overlap="0.15" -s wipe_retraction_retract_speed="25" -s support_bottom_pattern="concentric" -s material_break_preparation_speed="2" -s acceleration_support_bottom="3000" -s material_end_of_filament_purge_length="20" -s wireframe_roof_drag_along="0.8" -s support_bottom_line_distance="0.4" -s wall_min_flow="0" -s ironing_flow="10.0" -s acceleration_prime_tower="3000" -s retraction_hop_after_extruder_switch_height="1" -s skirt_gap="3" -s speed_ironing="20.0" -s machine_max_acceleration_e="10000" -s line_width="0.4" -s zig_zaggify_support="False" -s wipe_hop_enable="False" -s optimize_wall_printing_order="False" -s raft_interface_line_width="0.8" -s gantry_height="180" -s material_surface_energy="100" -s print_bed_temperature="66" -s magic_mesh_surface_mode="normal" -s raft_fan_speed="0" -s wireframe_up_half_speed="0.3" -s machine_max_feedrate_e="299792458000" -s spaghetti_infill_stepped="True" -s raft_surface_fan_speed="0" -s meshfix_union_all_remove_holes="False" -s speed_wall_x="60.0" -s raft_base_jerk="20" -s machine_extruder_count="1" -s jerk_support_roof="20" -s wireframe_top_delay="0" -s machine_endstop_positive_direction_y="False" -s jerk_topbottom="20" -s remove_empty_first_layers="True" -s support_bottom_height="1" -s raft_acceleration="3000" -s jerk_print_layer_0="20" -s wireframe_roof_inset="3" -s material_anti_ooze_retracted_position="-4" -s expand_skins_expand_distance="0.8" -s bridge_wall_speed="15.0" -s support_bottom_offset="0.0" -s wireframe_flat_delay="0.1" -s machine_nozzle_expansion_angle="45" -s brim_line_count="8" -s support_roof_line_distance="0.4" -s prime_tower_line_width="0.4" -s infill_line_width="0.4" -s magic_fuzzy_skin_outside_only="False" -s speed_equalize_flow_max="150" -s jerk_roofing="20" -s raft_base_line_width="0.8" -s coasting_enable="False" -s support_interface_line_width="0.4" -s support_bottom_angles="[ ]" -s support_skip_zag_per_mm="20" -s support_extruder_nr_layer_0="0" -s meshfix_maximum_travel_resolution="0.8" -s cool_min_speed="10" -s machine_disallowed_areas="[]" -s support_interface_enable="False" -s bridge_skin_density_3="80" -s machine_max_feedrate_z="299792458000" -s support_roof_density="100" -s spaghetti_max_height="2.0" -s skirt_line_count="4" -s retraction_count_max="90" -s retraction_extrusion_window="6.5" -s support_fan_enable="False" -s support_roof_pattern="concentric" -s support_mesh="False" -s wireframe_straight_before_down="20" -s material_print_temperature="210" -s retraction_extra_prime_amount="0" -s wireframe_printspeed="5" -s machine_steps_per_mm_y="50" -s support_tree_branch_diameter="2" -s speed_slowdown_layers="2" -s default_material_print_temperature="210" -s roofing_layer_count="0" -s relative_extrusion="False" -s wall_0_inset="0" -s brim_width="8.0" -s speed_support_infill="60" -s raft_base_line_spacing="1.6" -s max_extrusion_before_wipe="10" -s ironing_pattern="zigzag" -s speed_travel="120" -s support_angle="70" -s raft_base_speed="22.5" -s layer_0_z_overlap="0.15" -s speed_z_hop="10" -s platform_adhesion="0" -s support_bottom_stair_step_width="5.0" -s raft_interface_jerk="20" -s material_shrinkage_percentage="0" -s ironing_line_spacing="0.1" -s skin_line_width="0.4" -s connect_infill_polygons="False" -s wireframe_bottom_delay="0" -s mesh_position_y="0" -s infill_randomize_start_location="False" -s machine_nozzle_head_distance="3" -s support_brim_width="8.0" -s top_layers="8" -s support_infill_sparse_thickness="0.1" -s material_bed_temperature_layer_0="66" -s clean_between_layers="False" -s travel="0" -s material_bed_temp_wait="True" -s raft_airgap="0.3" -s material_flush_purge_speed="0.5" -s support_enable="False" -s prime_tower_enable="False" -s raft_surface_thickness="0.1" -s jerk_skirt_brim="20" -s machine_heat_zone_length="16" -s gradual_infill_step_height="1.5" -s outer_inset_first="False" -s prime_tower_brim_enable="False" -s top_skin_preshrink="0.8" -s top_skin_expand_distance="0.8" -s jerk_print="20" -s mold_roof_height="0.5" -s jerk_ironing="20" -s roofing_angles="[ ]" -s support_top_distance="0.1" -s retraction_hop_after_extruder_switch="True" -s material_linear_advance_factor_skirt_brim="0" -s layer_height_0="0.3" -s switch_extruder_retraction_speeds="20" -s machine_firmware_retract="False" -s meshfix_union_all="True" -s support_z_distance="0.1" -s bridge_settings_enabled="False" -s z_seam_y="190" -s acceleration_layer_0="3000" -s raft_interface_thickness="0.15000000000000002" -s wall_line_count="2" -s magic_fuzzy_skin_point_density="1.25" -s top_bottom_thickness="0.8" -s machine_width="200" -s prime_tower_flow="100" -s acceleration_ironing="3000" -s raft_base_fan_speed="0" -s support_tree_collision_resolution="0.2" -s skin_no_small_gaps_heuristic="False" -s wipe_hop_amount="1" -s support_join_distance="2.0" -s machine_buildplate_type="glass" -s time="19:47:50" -s infill_material_flow="100" -s wireframe_enabled="False" -s material_linear_advance_factor_topbottom="0" -s wipe_retraction_prime_speed="25" -s wipe_pause="0" -s bridge_skin_support_threshold="50" -e0 -s switch_extruder_retraction_speeds="20" -s support_interface_density="100" -s cool_fan_speed="80" -s raft_base_thickness="0.36" -s machine_nozzle_offset_x="0" -s initial_layer_line_width_factor="100.0" -s bridge_skin_material_flow="60" -s material_end_of_filament_purge_speed="0.5" -s retraction_retract_speed="40" -s speed_layer_0="12" -s infill="0" -s small_feature_speed_factor="50" -s support_infill_sparse_thickness="0.1" -s speed_prime_tower="30" -s support_brim_enable="False" -s infill_multiplier="1" -s gradual_support_infill_steps="0" -s infill_sparse_density="32" -s bottom_skin_expand_distance="2.4" -s machine_nozzle_cool_down_speed="2.0" -s infill_offset_x="0" -s limit_support_retractions="True" -s machine_extruder_end_pos_x="0" -s infill_offset_y="0" -s acceleration_print_layer_0="3000" -s wall_min_flow_retract="False" -s speed_support_roof="20.0" -s xy_offset_layer_0="0" -s z_seam_position="back" -s material_guid="0ff92885-617b-4144-a03c-9989872454bc" -s material_linear_advance_factor_support_interface="0" -s material_linear_advance_factor_infill="0" -s material_break_preparation_speed="2" -s acceleration_support_bottom="3000" -s material_end_of_filament_purge_length="20" -s gradual_support_infill_step_height="1" -s support_conical_angle="30" -s raft_surface_acceleration="3000" -s support_roof_pattern="concentric" -s jerk_layer_0="20" -s support_pattern="lines" -s jerk_infill="20" -s speed_equalize_flow_enabled="False" -s top_thickness="0.8" -s bottom_skin_preshrink="2.4" -s raft_surface_line_spacing="0.4" -s skin_edge_support_layers="0" -s wall_line_width="0.4" -s xy_offset="0" -s travel_avoid_other_parts="True" -s raft_interface_speed="11.25" -s travel_avoid_distance="0.625" -s support_interface_height="1" -s wipe_move_distance="20" -s cool_fan_speed_min="80" -s acceleration_skirt_brim="3000" -s meshfix="0" -s support_bottom_material_flow="100" -s acceleration_wall="3000" -s ironing_enabled="False" -s acceleration_travel="5000" -s support_supported_skin_fan_speed="100" -s infill_wall_line_count="0" -s support_wall_count="1" -s skin_edge_support_thickness="0" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s experimental="0" -s support_skip_some_zags="False" -s travel_compensate_overlapping_walls_0_enabled="True" -s support_bottom_line_width="0.4" -s material_flow="100" -s support_offset="0" -s raft_smoothing="5" -s speed_topbottom="15.0" -s wipe_hop_enable="False" -s zig_zaggify_support="False" -s speed_print="30" -s prime_tower_min_volume="6" -s jerk_travel="30" -s material_linear_advance_factor_skirt_brim="0" -s support_tree_branch_diameter="2" -s machine_steps_per_mm_y="50" -s acceleration_support_interface="3000" -s spaghetti_max_infill_angle="10" -s bridge_wall_material_flow="50" -s wipe_hop_speed="10" -s jerk_wall_0="20" -s retraction_hop="1" -s wipe_pause="0" -s wipe_retraction_prime_speed="40" -s minimum_support_area="0.0" -s material_linear_advance_factor_wall_0="0" -s wall_0_wipe_dist="0.2" -s switch_extruder_extra_prime_amount="0" -s support_tower_maximum_supported_diameter="3.0" -s spaghetti_infill_extra_volume="0" -s support_connect_zigzags="True" -s support_xy_distance_overhang="0.2" -s bridge_skin_density_3="80" -s support_interface_enable="False" -s resolution="0" -s support_line_width="0.4" -s material_break_preparation_retracted_position="-16" -s support_xy_overrides_z="z_overrides_xy" -s min_infill_area="0" -s machine_nozzle_tip_outer_diameter="1" -s machine_steps_per_mm_x="50" -s infill_angles="[ ]" -s minimum_interface_area="1.0" -s skirt_brim_line_width="0.4" -s top_bottom_pattern="lines" -s cool_fan_full_layer="2" -s center_object="False" -s spaghetti_inset="0.2" -s gradual_infill_steps="0" -s jerk_travel_layer_0="30.0" -s mold_enabled="False" -s raft_surface_line_width="0.4" -s cooling="0" -s support_tree_collision_resolution="0.2" -s raft_base_fan_speed="0" -s material_print_temperature_layer_0="220" -s raft_interface_line_spacing="1.0" -s machine_nozzle_heat_up_speed="2.0" -s material_flush_purge_length="60" -s bridge_skin_material_flow_2="100" -s speed_support_interface="20.0" -s support_interface_offset="0.0" -s jerk_support="20" -s wall_line_width_x="0.4" -s support_line_distance="0" -s retraction_enable="True" -s switch_extruder_retraction_speed="20" -s retraction_hop_enabled="False" -s acceleration_roofing="3000" -s cool_min_layer_time_fan_speed_max="10" -s wipe_retraction_speed="40" -s retraction_amount="2.5" -s raft_speed="15.0" -s mold_angle="40" -s material_flow_layer_0="100" -s wall_material_flow="100" -s bridge_skin_material_flow_3="110" -s bridge_fan_speed_2="0" -s initial_bottom_layers="6" -s support_interface_pattern="concentric" -s connect_skin_polygons="False" -s infill_pattern="gyroid" -s material_flow_dependent_temperature="False" -s bottom_layers="6" -s magic_fuzzy_skin_thickness="0.3" -s meshfix_extensive_stitching="False" -s infill_wipe_dist="0.1" -s machine_extruder_start_pos_abs="False" -s skirt_brim_material_flow="100" -s bridge_skin_speed="10" -s jerk_wall_x="20" -s wipe_retraction_amount="2.5" -s material_break_temperature="50" -s support_roof_height="1.2" -s magic_fuzzy_skin_enabled="False" -s connect_infill_polygons="False" -s machine_extruder_start_code="" -s support_material_flow="100" -s bridge_fan_speed="100" -s bridge_sparse_infill_max_density="0" -s wall_thickness="0.8" -s support_bottom_distance="0" -s material_crystallinity="False" -s machine_steps_per_mm_e="1600" -s jerk_wall="20" -s dual="0" -s support_bottom_enable="False" -s skin_overlap="5" -s speed_infill="30" -s machine_nozzle_id="unknown" -s wipe_brush_pos_x="100" -s acceleration_travel_layer_0="5000.0" -s raft_surface_layers="2" -s skirt_brim_minimal_length="250" -s material_linear_advance_factor="0" -s cool_min_layer_time="5" -s wipe_retraction_enable="True" -s travel_avoid_supports="False" -s acceleration_infill="3000" -s speed_ironing="10.0" -s support_roof_line_width="0.4" -s extruder_prime_pos_y="0" -s material_linear_advance_factor_prime_tower="0" -s retraction_prime_speed="40" -s z_seam_type="sharpest_corner" -s prime_blob_enable="False" -s meshfix_keep_open_polygons="False" -s raft_surface_speed="15.0" -s infill_enable_travel_optimization="False" -s machine_nozzle_temp_enabled="True" -s switch_extruder_retraction_amount="16" -s skirt_brim_speed="12" -s material_maximum_park_duration="300" -s infill_material_flow="100" -s support_use_towers="True" -s infill_support_enabled="False" -s cool_fan_speed_0="0" -s support_brim_line_count="20" -s blackmagic="0" -s multiple_mesh_overlap="0.15" -s wipe_retraction_retract_speed="40" -s material_linear_advance_factor_wall_x="0" -s acceleration_print="3000" -s support_bottom_pattern="concentric" -s meshfix_maximum_deviation="0.05" -s cool_fan_enabled="True" -s wall_overhang_angle="90" -s cool_fan_speed_max="80" -s machine_extruder_end_code="" -s support_roof_angles="[ ]" -s retraction_hop_after_extruder_switch_height="1" -s machine_extruder_end_pos_abs="False" -s support="0" -s spaghetti_infill_enabled="False" -s acceleration_support="3000" -s acceleration_wall_0="3000" -s jerk_support_bottom="20" -s material_extrusion_cool_down_speed="0.7" -s speed_support_bottom="20.0" -s support_conical_min_width="5.0" -s coasting_min_volume="0.8" -s material_linear_advance_factor_wall="0" -s cool_fan_full_at_height="0.3" -s support_infill_angles="[ ]" -s shell="0" -s support_tower_diameter="3.0" -s machine_extruder_start_pos_x="0" -s wipe_hop_amount="1" -s support_join_distance="2.0" -s support_tree_angle="40" -s fill_perimeter_gaps="everywhere" -s prime_tower_wipe_enabled="True" -s machine_heat_zone_length="16" -s jerk_skirt_brim="20" -s raft_jerk="20" -s speed_print_layer_0="12" -s command_line_settings="0" -s material_linear_advance_factor_support="0" -s conical_overhang_angle="50" -s infill_overlap_mm="0.05600000000000001" -s mesh_position_z="0" -s speed="0" -s material_diameter="1.75" -s meshfix_union_all_remove_holes="False" -s gradual_infill_step_height="1.5" -s cool_lift_head="False" -s speed_wall_0="15.0" -s outer_inset_first="False" -s extruder_prime_pos_z="0" -s support_tower_roof_angle="65" -s meshfix_maximum_resolution="0.5" -s wipe_repeat_count="5" -s support_tree_branch_distance="1" -s wall_x_material_flow="100" -s min_skin_width_for_expansion="3.67394039744206e-17" -s material_no_load_move_factor="0.940860215" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s max_skin_angle_for_expansion="90" -s top_bottom_pattern_0="lines" -s alternate_extra_perimeter="False" -s support_roof_enable="True" -s slicing_tolerance="exclusive" -s machine_extruder_end_pos_y="0" -s cross_support_density_image="" -s z_seam_relative="False" -s support_xy_distance="0.7" -s speed_wall="15.0" -s material_final_print_temperature="205" -s machine_endstop_positive_direction_x="False" -s bridge_enable_more_layers="True" -s conical_overhang_enabled="False" -s speed_travel_layer_0="60.0" -s fill_outline_gaps="False" -s machine_filament_park_distance="16" -s support_zag_skip_count="0" -s material_break_retracted_position="-50" -s material_initial_print_temperature="210" -s switch_extruder_prime_speed="20" -s extruder_prime_pos_x="0" -s layer_start_y="0.0" -s filter_out_tiny_gaps="True" -s bridge_skin_speed_3="10" -s spaghetti_flow="20" -s magic_fuzzy_skin_point_dist="0.8" -s coasting_speed="90" -s skin_material_flow="100" -s support_bottom_density="100" -s acceleration_wall_x="3000" -s skin_overlap_mm="0.02" -s small_feature_max_length="0.0" -s support_initial_layer_line_distance="0" -s support_bottom_offset="0.0" -s bridge_wall_speed="10" -s meshfix_union_all="True" -s support_z_distance="0.1" -s infill_line_distance="1.25" -s minimum_bottom_area="1.0" -s retraction_combing_max_distance="0" -s z_seam_x="100.0" -s expand_skins_expand_distance="2.4" -s mesh_position_x="0" -s wipe_retraction_extra_prime_amount="0" -s jerk_support_roof="20" -s machine_endstop_positive_direction_y="False" -s coasting_volume="0.064" -s machine_endstop_positive_direction_z="True" -s small_feature_speed_factor_0="50" -s infill_support_angle="40" -s raft_surface_jerk="20" -s support_interface_skip_height="0.3" -s mold_width="5" -s infill_before_walls="True" -s material="0" -s jerk_support_infill="20" -s wall_overhang_speed_factor="100" -s jerk_prime_tower="20" -s skin_outline_count="1" -s material_anti_ooze_retraction_speed="5" -s support_conical_enabled="False" -s bridge_skin_speed_2="10" -s retract_at_layer_change="False" -s raft_base_jerk="20" -s speed_wall_x="30.0" -s support_roof_material_flow="100" -s bridge_skin_density_2="75" -s brim_replaces_support="True" -s acceleration_support_infill="3000" -s brim_gap="0" -s travel_compensate_overlapping_walls_enabled="True" -s roofing_pattern="lines" -s travel_compensate_overlapping_walls_x_enabled="True" -s wall_line_width_0="0.4" -s cross_infill_pocket_size="1.25" -s raft_margin="15" -s support_bottom_stair_step_height="0.3" -s brim_outside_only="True" -s material_standby_temperature="175" -s speed_roofing="15.0" -s roofing_line_width="0.4" -s speed_support="30" -s ironing_inset="0.2" -s bridge_fan_speed_3="0" -s support_tree_branch_diameter_angle="5" -s support_infill_rate="0" -s infill_randomize_start_location="False" -s mesh_position_y="0" -s wall_line_count="6" -s magic_fuzzy_skin_point_density="1.25" -s platform_adhesion="0" -s support_bottom_stair_step_width="5.0" -s speed_z_hop="10" -s retraction_speed="40" -s wall_0_material_flow="100" -s cool_min_speed="10" -s bridge_skin_density="100" -s raft_base_line_width="0.8" -s machine_nozzle_offset_y="0" -s extruder_nr="0" -s infill_overlap="14" -s support_interface_material_flow="100" -s magic_mesh_surface_mode="normal" -s raft_fan_speed="0" -s raft_interface_line_width="0.8" -s material_surface_energy="100" -s retraction_extrusion_window="2.5" -s support_fan_enable="False" -s machine_extruder_start_pos_y="0" -s extruder_prime_pos_abs="False" -s material_adhesion_tendency="0" -s infill_sparse_thickness="0.1" -s skin_no_small_gaps_heuristic="False" -s machine_nozzle_head_distance="3" -s support_brim_width="8.0" -s top_layers="6" -s material_break_preparation_temperature="220" -s layer_start_x="0.0" -s machine_min_cool_heat_time_window="50.0" -s support_bottom_line_distance="0.4" -s zig_zaggify_infill="False" -s wall_min_flow="0" -s ironing_flow="10.0" -s support_roof_offset="0.0" -s acceleration_support_roof="3000" -s acceleration_prime_tower="3000" -s skirt_gap="3" -s line_width="0.4" -s optimize_wall_printing_order="False" -s raft_acceleration="3000" -s support_bottom_height="1" -s raft_base_acceleration="3000" -s skirt_line_count="4" -s retraction_count_max="90" -s ironing_only_highest_layer="False" -s acceleration_topbottom="3000" -s machine_settings="0" -s small_hole_max_size="0" -s brim_line_count="8" -s support_roof_line_distance="0.4" -s infill_line_width="0.4" -s magic_fuzzy_skin_outside_only="False" -s prime_tower_line_width="0.4" -s jerk_print_layer_0="20" -s material_anti_ooze_retracted_position="-4" -s support_interface_angles="[ ]" -s bottom_thickness="0.8" -s speed_equalize_flow_max="150" -s jerk_roofing="20" -s minimum_roof_area="1.0" -s machine_extruder_cooling_fan_number="0" -s machine_nozzle_size="0.4" -s raft_interface_jerk="20" -s material_shrinkage_percentage="0" -s support_roof_density="100" -s spaghetti_max_height="2.0" -s bridge_skin_support_threshold="50" -s material_linear_advance_factor_topbottom="0" -s material_print_temperature="220" -s retraction_extra_prime_amount="0" -s default_material_print_temperature="200" -s roofing_layer_count="0" -s wall_0_inset="0" -s brim_width="8.0" -s speed_support_infill="30" -s raft_base_line_spacing="1.6" -s max_extrusion_before_wipe="10" -s roofing_material_flow="100" -s prime_tower_flow="100" -s acceleration_ironing="3000" -s raft_interface_acceleration="3000" -s spaghetti_infill_stepped="True" -s raft_surface_fan_speed="0" -s jerk_print="20" -s z_seam_y="190" -s retraction_min_travel="0.8" -s acceleration_layer_0="3000" -s material_break_speed="25" -s ironing_line_spacing="0.1" -s raft_airgap="0.3" -s material_flush_purge_speed="0.5" -s skin_line_width="0.4" -s machine_steps_per_mm_z="50" -s skin_angles="[ ]" -s skin_preshrink="2.4" -s clean_between_layers="False" -s travel="0" -s raft_surface_thickness="0.1" -s top_skin_preshrink="2.4" -s jerk_support_interface="20" -s cross_infill_density_image="" -s support_interface_line_width="0.4" -s support_skip_zag_per_mm="20" -s support_bottom_angles="[ ]" -s ironing_pattern="zigzag" -s speed_travel="150" -s support_angle="70" -s raft_base_speed="11.25" -s layer_0_z_overlap="0.15" -s top_skin_expand_distance="2.4" -s sub_div_rad_add="0.4" -s z_seam_corner="z_seam_corner_inner" -s roofing_angles="[ ]" -s jerk_ironing="20" -s top_bottom_thickness="0.8" -s support_top_distance="0.1" -s retraction_hop_after_extruder_switch="True" -s jerk_topbottom="20" -s bridge_wall_coast="100" -s raft_interface_fan_speed="0" -s raft_interface_thickness="0.15000000000000002" -s meshfix_maximum_travel_resolution="0.8" -s machine_feeder_wheel_diameter="10.0" -s retraction_hop_only_when_collides="False" -s coasting_enable="False" -s mold_roof_height="0.5" -g -e0 -l "0" -s extruder_nr="0"
2020-02-29 19:47:51,819 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 222 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-02-29 19:47:51,888 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 19:47:51,891 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-02-29 19:47:51,897 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [663]: Slicing took 1.038133144378662 seconds
2020-02-29 19:47:51,898 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [664]: Number of models per buildplate: {0: 1}
2020-02-29 19:47:51,898 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [678]: See if there is more to slice...
2020-02-29 19:47:52,100 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [181]: Socket state changed to Closing
2020-02-29 19:47:52,103 - DEBUG - [MainThread] UM.Backend.Backend._onSocketError [203]: Socket debug: Arcus Error (13): Closing socket because other side requested close.
2020-02-29 19:47:52,106 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [183]: Socket state changed to Closed
2020-02-29 19:47:52,106 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onBackendQuit [829]: Backend quit with return code 0. Resetting process and socket.
2020-02-29 19:47:58,684 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-02-29 19:50:32,827 - DEBUG - [MainThread] LinearAdvanceSettingPlugin.LinearAdvanceSettingPlugin._filterGcode [109]: No used extruders specify a linear advance factor
2020-02-29 19:50:33,053 - DEBUG - [MainThread] UM.Controller.setActiveStage [149]: Setting active stage to MonitorStage
2020-02-29 19:50:33,101 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:211: Error: Cannot assign [undefined] to QString
2020-02-29 19:50:33,121 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._processRequest [308]: Request [8c48750cf3c44b7abdb987693164401c] started
2020-02-29 19:50:33,125 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-02-29 19:50:33,556 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-02-29 19:50:33,696 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestFinished [369]: Request [8c48750cf3c44b7abdb987693164401c] finished.
2020-02-29 19:50:33,699 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-02-29 19:50:33,700 - INFO - [MainThread] SliceInfoPlugin.SliceInfo._onRequestFinished [275]: SliceInfo sent successfully
2020-02-29 19:50:42,687 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-02-29 19:51:03,687 - DEBUG - [MainThread] UM.Message._onInactivityTriggered [88]: Hiding message because of inactivity
2020-02-29 19:51:10,532 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [772]: Resource created on OctoPrint instance: http://192.168.2.156/api/files/local/WDI3P_JST_Join_Jig.gcode
2020-02-29 19:51:40,688 - DEBUG - [MainThread] UM.Message._onInactivityTriggered [88]: Hiding message because of inactivity
2020-02-29 20:49:05,958 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Orange Leader"._octoprint._tcp.local
2020-02-29 20:49:05,962 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Blue Leader"._octoprint._tcp.local
2020-02-29 20:49:05,963 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Darth Pooky"._octoprint._tcp.local
2020-02-29 22:04:12,300 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Orange Leader"._octoprint._tcp.local
2020-02-29 22:04:12,305 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Darth Pooky"._octoprint._tcp.local
2020-02-29 22:04:12,305 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Blue Leader"._octoprint._tcp.local
2020-02-29 23:19:18,352 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Orange Leader"._octoprint._tcp.local
2020-02-29 23:19:18,357 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Blue Leader"._octoprint._tcp.local
2020-02-29 23:19:18,358 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Darth Pooky"._octoprint._tcp.local
2020-03-01 00:34:20,728 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Blue Leader"._octoprint._tcp.local
2020-03-01 00:34:20,731 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Darth Pooky"._octoprint._tcp.local
2020-03-01 00:34:20,733 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Orange Leader"._octoprint._tcp.local
2020-03-01 01:49:40,916 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Orange Leader"._octoprint._tcp.local
2020-03-01 01:49:40,919 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Darth Pooky"._octoprint._tcp.local
2020-03-01 01:50:05,797 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Blue Leader"._octoprint._tcp.local
2020-03-01 03:04:42,989 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Darth Pooky"._octoprint._tcp.local
2020-03-01 03:04:42,993 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Orange Leader"._octoprint._tcp.local
2020-03-01 03:05:06,944 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Blue Leader"._octoprint._tcp.local
2020-03-01 04:19:47,202 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Orange Leader"._octoprint._tcp.local
2020-03-01 04:19:47,205 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Darth Pooky"._octoprint._tcp.local
2020-03-01 04:20:10,852 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Blue Leader"._octoprint._tcp.local
2020-03-01 05:35:00,939 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Darth Pooky"._octoprint._tcp.local
2020-03-01 05:35:00,942 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Orange Leader"._octoprint._tcp.local
2020-03-01 05:35:21,517 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Blue Leader"._octoprint._tcp.local
2020-03-01 06:50:21,745 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Orange Leader"._octoprint._tcp.local
2020-03-01 06:50:21,748 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Darth Pooky"._octoprint._tcp.local
2020-03-01 06:50:46,628 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Blue Leader"._octoprint._tcp.local
2020-03-01 08:05:42,857 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Darth Pooky"._octoprint._tcp.local
2020-03-01 08:06:06,511 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Orange Leader"._octoprint._tcp.local
2020-03-01 08:06:06,514 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Blue Leader"._octoprint._tcp.local
2020-03-01 09:21:06,122 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Darth Pooky"._octoprint._tcp.local
2020-03-01 09:21:31,005 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Orange Leader"._octoprint._tcp.local
2020-03-01 09:21:31,006 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Blue Leader"._octoprint._tcp.local
2020-03-01 10:36:25,699 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Darth Pooky"._octoprint._tcp.local
2020-03-01 10:36:50,276 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Blue Leader"._octoprint._tcp.local
2020-03-01 10:36:50,282 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Orange Leader"._octoprint._tcp.local
2020-03-01 11:26:54,374 - DEBUG - [MainThread] UM.Controller.setActiveStage [149]: Setting active stage to PrepareStage
2020-03-01 11:26:54,420 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-01 11:26:54,498 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-01 11:26:54,502 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-01 11:26:54,510 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/plugins/plugins/PrepareStage/PrepareMain.qml:16:5: QML ActionPanelWidget: Binding loop detected for property "width"
2020-03-01 11:26:54,534 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:79: ReferenceError: stop is not defined
2020-03-01 11:26:54,538 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:63: TypeError: Cannot read property of null
2020-03-01 11:26:54,541 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:91: TypeError: Cannot read property of null
2020-03-01 11:26:54,543 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:102: TypeError: Cannot read property of null
2020-03-01 11:26:54,545 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:103: TypeError: Cannot read property of null
2020-03-01 11:26:54,548 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:139: TypeError: Cannot read property of null
2020-03-01 11:26:54,550 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:140: TypeError: Cannot read property of null
2020-03-01 11:26:54,553 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:120: TypeError: Cannot read property of null
2020-03-01 11:26:54,555 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:122: TypeError: Cannot read property of null
2020-03-01 11:26:54,557 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-03-01 11:26:54,560 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:36: TypeError: Cannot read property of null
2020-03-01 11:26:54,562 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:37: TypeError: Cannot read property of null
2020-03-01 11:26:54,565 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:49: TypeError: Cannot read property of null
2020-03-01 11:26:54,567 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:59: TypeError: Cannot read property of null
2020-03-01 11:26:54,569 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:61: TypeError: Cannot read property of null
2020-03-01 11:26:54,571 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:63: TypeError: Cannot read property of null
2020-03-01 11:26:54,574 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ExtruderBox.qml:20: TypeError: Cannot read property of null
2020-03-01 11:26:54,576 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:29: TypeError: Cannot read property of null
2020-03-01 11:26:54,579 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:30: TypeError: Cannot read property of null
2020-03-01 11:26:54,581 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:40: TypeError: Cannot read property of null
2020-03-01 11:26:54,583 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:73: TypeError: Cannot read property of null
2020-03-01 11:26:54,585 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:135: TypeError: Cannot read property of null
2020-03-01 11:26:54,588 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:246: TypeError: Cannot read property of null
2020-03-01 11:26:54,590 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:247: TypeError: Cannot read property of null
2020-03-01 11:26:54,593 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:173: TypeError: Cannot read property of null
2020-03-01 11:26:54,595 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:175: TypeError: Cannot read property of null
2020-03-01 11:26:54,597 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:190: TypeError: Cannot read property of null
2020-03-01 11:26:54,599 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:193: TypeError: Cannot read property of null
2020-03-01 11:26:54,602 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:60: TypeError: Cannot read property of null
2020-03-01 11:26:54,604 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:248: TypeError: Cannot read property of null
2020-03-01 11:26:54,607 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:294: TypeError: Cannot read property of null
2020-03-01 11:26:54,610 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:26: TypeError: Cannot read property of null
2020-03-01 11:26:54,612 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:27: TypeError: Cannot read property of null
2020-03-01 11:26:54,616 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:388: TypeError: Cannot read property of null
2020-03-01 11:26:54,619 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:390: TypeError: Cannot read property of null
2020-03-01 11:26:54,621 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:391: TypeError: Cannot read property of null
2020-03-01 11:26:54,623 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:26: TypeError: Cannot read property of null
2020-03-01 11:26:54,625 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:27: TypeError: Cannot read property of null
2020-03-01 11:26:54,628 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:24: TypeError: Cannot read property of null
2020-03-01 11:26:54,630 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:30: TypeError: Cannot read property of null
2020-03-01 11:26:54,632 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:39: TypeError: Cannot read property of null
2020-03-01 11:26:54,635 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:24: TypeError: Cannot read property of null
2020-03-01 11:26:54,637 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:30: TypeError: Cannot read property of null
2020-03-01 11:26:54,640 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:39: TypeError: Cannot read property of null
2020-03-01 11:26:54,643 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:24: TypeError: Cannot read property of null
2020-03-01 11:26:54,645 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:30: TypeError: Cannot read property of null
2020-03-01 11:26:54,648 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:39: TypeError: Cannot read property of null
2020-03-01 11:26:54,651 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupTooltip.qml:67: TypeError: Cannot read property of null
2020-03-01 11:26:54,654 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupTooltip.qml:69: TypeError: Cannot read property of null
2020-03-01 11:26:54,657 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupTooltip.qml:71: TypeError: Cannot read property of null
2020-03-01 11:26:54,660 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:150: TypeError: Cannot read property of null
2020-03-01 11:26:54,663 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-03-01 11:26:54,666 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:166: TypeError: Cannot read property of null
2020-03-01 11:26:54,669 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:167: TypeError: Cannot read property of null
2020-03-01 11:26:54,672 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:178: TypeError: Cannot read property of null
2020-03-01 11:26:54,675 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:231: TypeError: Cannot read property of null
2020-03-01 11:26:54,678 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:241: TypeError: Cannot read property of null
2020-03-01 11:26:59,035 - INFO - [MainThread] cura.UI.MachineActionManager.addDefaultMachineActions [56]: Default machine actions have been added for machine definition [wanhao_i3plus], do nothing.
2020-03-01 11:26:59,053 - WARNING - [MainThread] cura.Settings.GlobalStack.addExtruder [179]: Extruder [wanhao_i3plus_extruder_0 #5] has already been added to this stack [RedLeader]
2020-03-01 11:26:59,055 - WARNING - [MainThread] cura.Settings.ExtruderManager.registerExtruder [156]: Extruder [wanhao_i3plus_extruder_0 #5] has already been registered on machine [RedLeader], not doing anything
2020-03-01 11:26:59,060 - INFO - [MainThread] UM.Logger.info [112]: Initializing Active Machine...
2020-03-01 11:26:59,070 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-01 11:26:59,074 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-01 11:26:59,215 - WARNING - [MainThread] UM.OutputDevice.OutputDeviceManager.removeOutputDevice [179]: Could not find output device with id GreyLeader to remove
2020-03-01 11:26:59,218 - WARNING - [MainThread] UM.OutputDevice.OutputDeviceManager.removeOutputDevice [179]: Could not find output device with id GreyLeader to remove
2020-03-01 11:26:59,220 - WARNING - [MainThread] UM.OutputDevice.OutputDeviceManager.removeOutputDevice [179]: Could not find output device with id GreyLeader to remove
2020-03-01 11:26:59,223 - WARNING - [MainThread] UM.OutputDevice.OutputDeviceManager.removeOutputDevice [179]: Could not find output device with id GreyLeader to remove
2020-03-01 11:26:59,226 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-01 11:26:59,322 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device BlueLeader already added
2020-03-01 11:26:59,323 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [303]: Connection with instance BlueLeader with url http://192.168.2.140:80/ started
2020-03-01 11:26:59,335 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/SettingsMenu.qml:51: TypeError: Cannot read property 'isEnabled' of undefined
2020-03-01 11:26:59,338 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/SettingsMenu.qml:44: TypeError: Cannot read property 'isEnabled' of undefined
2020-03-01 11:26:59,342 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/MaterialMenu.qml:26: TypeError: Cannot read property 'isEnabled' of undefined
2020-03-01 11:26:59,344 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/MaterialMenu.qml:28: TypeError: Cannot read property 'material' of undefined
2020-03-01 11:26:59,347 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-01 11:26:59,407 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-01 11:26:59,425 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-01 11:26:59,427 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-01 11:27:00,068 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [135]: New error check scheduled.
2020-03-01 11:27:00,648 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-01 11:27:00,656 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [63]: Updating QualityProfilesDropDownMenuModel.
2020-03-01 11:27:01,103 - INFO - [MainThread] cura.Machines.MachineErrorChecker._setResult [187]: Error check finished, result = False, time = 1.0s
2020-03-01 11:27:01,342 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device BlueLeader already added
2020-03-01 11:27:01,344 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device BlueLeader already added
2020-03-01 11:27:01,345 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [741]: Set OctoPrint camera url to http://192.168.2.140:80/webcam/?action=stream
2020-03-01 11:27:05,023 - INFO - [MainThread] UM.Controller.deleteAllNodesWithMeshData [386]: Clearing scene
2020-03-01 11:27:05,028 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: GroupedOp.(#=1) <UM.Operations.RemoveSceneNodeOperation.RemoveSceneNodeOperation object at 0x60001c6eef58>, took 0ms
2020-03-01 11:27:05,031 - INFO - [MainThread] cura.CuraApplication._removeNodesWithLayerData [1900]: Clearing scene
2020-03-01 11:27:05,778 - WARNING - [MainThread] cura.UI.PrintInformation.setBaseName [360]: Unsupported Mime Type Database file extension 
2020-03-01 11:27:09,754 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-03-01 11:27:19,100 - INFO - [Thread-8] STLReader.STLReader.load_file [51]: Using NumPy-STL to load STL data.
2020-03-01 11:27:19,111 - DEBUG - [Thread-8] UM.Mesh.MeshData.calculateNormalsFromVertices [495]: Calculating normals took 0.0011088848114013672 seconds
2020-03-01 11:27:19,112 - DEBUG - [Thread-8] STLReader.STLReader._read [102]: Loaded a mesh with 34740 vertices
2020-03-01 11:27:19,131 - DEBUG - [Thread-8] UM.Mesh.MeshData.approximateConvexHull [452]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.01484990119934082 seconds. 440 input vertices. 440 output vertices.
2020-03-01 11:27:19,140 - DEBUG - [Thread-8] UM.FileHandler.ReadFileJob.run [71]: Loading file took 0.0 seconds
2020-03-01 11:27:19,156 - DEBUG - [Thread-8] UM.Mesh.MeshData.approximateConvexHull [452]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.01294398307800293 seconds. 442 input vertices. 442 output vertices.
2020-03-01 11:27:19,184 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: <UM.Operations.AddSceneNodeOperation.AddSceneNodeOperation object at 0x6000187a7f58>, took 3ms
2020-03-01 11:27:28,768 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-03-01 11:27:30,902 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._terminate [292]: Attempting to kill the engine process
2020-03-01 11:27:30,908 - DEBUG - [MainThread] UM.Backend.Backend._createSocket [213]: Previous socket existed. Closing that first.
2020-03-01 11:27:30,918 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [173]: Socket state changed to Listening
2020-03-01 11:27:30,961 - INFO - [MainThread] UM.Backend.Backend.startEngine [81]: Started engine process: /Applications/Ultimaker Cura 3.app/Contents/MacOS/CuraEngine
2020-03-01 11:27:30,964 - DEBUG - [MainThread] UM.Backend.Backend._backendLog [101]: [Backend] Calling engine with: ['/Applications/Ultimaker Cura 3.app/Contents/MacOS/CuraEngine', 'connect', '127.0.0.1:49674', '']
2020-03-01 11:27:30,968 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-03-01 11:27:30,971 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [177]: Socket state changed to Connected
2020-03-01 11:27:30,973 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] Cura_SteamEngine version 4.5.0
2020-03-01 11:27:30,976 - DEBUG - [MainThread] UM.Backend.Backend._onSocketStateChanged [167]: Backend connected on port 49674
2020-03-01 11:27:30,978 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] Copyright (C) 2019 Ultimaker
2020-03-01 11:27:30,981 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-03-01 11:27:30,984 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] This program is free software: you can redistribute it and/or modify
2020-03-01 11:27:30,988 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] it under the terms of the GNU Affero General Public License as published by
2020-03-01 11:27:30,992 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] the Free Software Foundation, either version 3 of the License, or
2020-03-01 11:27:30,997 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] (at your option) any later version.
2020-03-01 11:27:31,000 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-03-01 11:27:31,003 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] This program is distributed in the hope that it will be useful,
2020-03-01 11:27:31,006 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] but WITHOUT ANY WARRANTY; without even the implied warranty of
2020-03-01 11:27:31,009 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
2020-03-01 11:27:31,014 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] GNU Affero General Public License for more details.
2020-03-01 11:27:31,017 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-03-01 11:27:31,020 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] You should have received a copy of the GNU Affero General Public License
2020-03-01 11:27:31,024 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] along with this program.  If not, see <http://www.gnu.org/licenses/>.
2020-03-01 11:27:31,027 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'Plier_Holder 2.0.stl'>,rot.=Q<-0.0,-0.13052619222005157,-0.0,w=0.9914448613738104>), took 21ms
2020-03-01 11:27:31,101 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'Plier_Holder 2.0.stl'>,rot.=Q<-0.0,-0.25881904510252074,-0.0,w=0.9659258262890683>), took 2ms
2020-03-01 11:27:31,255 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'Plier_Holder 2.0.stl'>,rot.=Q<-0.0,-0.13052619222005157,-0.0,w=0.9914448613738104>), took 2ms
2020-03-01 11:27:32,167 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'Plier_Holder 2.0.stl'>,rot.=Q<0.0,0.13052619222005157,0.0,w=0.9914448613738104>), took 2ms
2020-03-01 11:27:36,426 - DEBUG - [Thread-2] UM.Operations.OperationStack.push [67]: GroupedOp.(#=1) TranslateOp.(node=<CuraSceneNode object: 'Plier_Holder 2.0.stl'>,trans.=<0.0,17.5,0.0>), took 1ms
2020-03-01 11:27:41,498 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [225]: Starting to slice...
2020-03-01 11:27:41,498 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [243]: Going to slice build plate [0]!
2020-03-01 11:27:41,820 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onStartSliceCompleted [429]: Sending slice message took 0.32140302658081055 seconds
2020-03-01 11:27:42,010 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING]  -s extruders_enabled_count="1" -s support_interface_density="100" -s cool_fan_speed="100.0" -s raft_base_thickness="0.36" -s bridge_skin_material_flow="60" -s slicing_tolerance="middle" -s material_end_of_filament_purge_speed="0.5" -s prime_tower_size="20" -s retraction_retract_speed="25" -s speed_layer_0="30.0" -s infill="0" -s small_feature_speed_factor="50" -s speed_prime_tower="60" -s support_brim_enable="False" -s infill_multiplier="1" -s gradual_support_infill_steps="0" -s initial_extruder_nr="0" -s infill_extruder_nr="-1" -s infill_sparse_density="20" -s bottom_skin_expand_distance="0.8" -s machine_nozzle_cool_down_speed="2.0" -s infill_offset_x="0" -s machine_depth="200" -s adhesion_z_offset_extensive_processing="False" -s limit_support_retractions="True" -s machine_max_acceleration_y="9000" -s infill_offset_y="0" -s acceleration_print_layer_0="3000" -s wall_min_flow_retract="False" -s speed_support_roof="20.0" -s xy_offset_layer_0="0" -s adhesion_type="skirt" -s z_seam_position="back" -s material_guid="" -s magic_spiralize="False" -s material_linear_advance_factor_support_interface="0" -s machine_max_acceleration_x="9000" -s material_linear_advance_factor_infill="0" -s print_temperature="210" -s skin_angles="[ ]" -s gradual_support_infill_step_height="1" -s support_conical_angle="30" -s raft_surface_acceleration="3000" -s jerk_layer_0="20" -s machine_max_feedrate_x="299792458000" -s support_pattern="lines" -s jerk_infill="20" -s speed_equalize_flow_enabled="False" -s top_thickness="0.8" -s bottom_skin_preshrink="0.8" -s raft_surface_line_spacing="0.4" -s wall_line_width="0.4" -s xy_offset="0" -s alternate_carve_order="True" -s travel_avoid_other_parts="True" -s raft_interface_speed="22.5" -s travel_avoid_distance="0.625" -s support_interface_height="1" -s jerk_travel_layer_0="30.0" -s date="01-03-2020" -s wireframe_flow="100" -s machine_acceleration="4000" -s machine_minimum_feedrate="0.0" -s skin_preshrink="0.8" -s jerk_wall="20" -s retract_at_layer_change="False" -s jerk_travel="30" -s support_skip_some_zags="False" -s minimum_roof_area="1.0" -s wireframe_flow_connection="100" -s bridge_skin_density="100" -s skirt_brim_line_width="0.4" -s top_bottom_pattern="lines" -s travel_compensate_overlapping_walls_0_enabled="True" -s flow_rate_max_extrusion_offset="0" -s material_diameter="2.85" -s support_bottom_line_width="0.4" -s raft_smoothing="5" -s speed_topbottom="30.0" -s wireframe_drag_along="0.6" -s material_break_speed="25" -s raft_interface_acceleration="3000" -s minimum_polygon_circumference="1.0" -s support_interface_skip_height="0.3" -s speed_print="60" -s skin_edge_support_layers="0" -s support_type="buildplate" -s support_roof_line_width="0.4" -s wireframe_printspeed_bottom="5" -s raft_surface_line_width="0.4" -s prime_tower_min_volume="6" -s prime_blob_enable="False" -s switch_extruder_prime_speed="20" -s wall_x_extruder_nr="-1" -s machine_steps_per_mm_z="50" -s smooth_spiralized_contours="True" -s ooze_shield_dist="2" -s bridge_wall_material_flow="50" -s cool_fan_full_layer="2" -s roofing_material_flow="100" -s wipe_hop_speed="10" -s infill_angles="[ ]" -s infill_line_distance="4.0" -s minimum_bottom_area="1.0" -s minimum_support_area="0.0" -s material_linear_advance_factor_wall_0="0" -s wall_0_wipe_dist="0.2" -s switch_extruder_extra_prime_amount="0" -s material_extrusion_cool_down_speed="0.7" -s wall_x_material_flow="100" -s support_xy_distance_overhang="0.2" -s wireframe_printspeed_up="5" -s resolution="0" -s retraction_hop="1" -s jerk_wall_0="20" -s skin_material_flow="100" -s support_bottom_density="100" -s jerk_support_interface="20" -s material_print_temperature_layer_0="210" -s retraction_min_travel="0.8" -s support_xy_overrides_z="z_overrides_xy" -s min_infill_area="0" -s machine_nozzle_tip_outer_diameter="1" -s machine_steps_per_mm_x="50" -s material_break_preparation_temperature="210" -s machine_nozzle_size="0.4" -s support_initial_layer_line_distance="2.6666666666666665" -s center_object="False" -s spaghetti_inset="0.2" -s mold_enabled="False" -s acceleration_travel="5000" -s acceleration_wall="3000" -s support_bottom_material_flow="100" -s ironing_enabled="False" -s cooling="0" -s support_infill_angles="[ ]" -s shell="0" -s bridge_skin_material_flow_2="100" -s speed_support_interface="40.0" -s meshfix="0" -s acceleration_skirt_brim="3000" -s support_line_distance="2.6666666666666665" -s retraction_enable="True" -s retraction_hop_enabled="False" -s switch_extruder_retraction_speed="20" -s acceleration_roofing="3000" -s anti_overhang_mesh="False" -s cool_min_layer_time_fan_speed_max="10" -s wipe_retraction_speed="25" -s retraction_amount="6.5" -s retraction_combing="all" -s material_flow_layer_0="100" -s wall_material_flow="100" -s extruder_prime_pos_z="0" -s support_tower_roof_angle="65" -s connect_skin_polygons="False" -s infill_pattern="grid" -s magic_fuzzy_skin_thickness="0.3" -s meshfix_extensive_stitching="False" -s infill_wipe_dist="0.1" -s skirt_brim_material_flow="100" -s bridge_skin_speed="15.0" -s mesh_position_x="0" -s prime_tower_position_y="175.584" -s jerk_wall_x="20" -s support_bottom_extruder_nr="0" -s support_roof_height="1.2" -s cutting_mesh="False" -s machine_max_jerk_xy="20.0" -s support_material_flow="100" -s bridge_fan_speed="100" -s support_line_width="0.4" -s ooze_shield_enabled="False" -s support_extruder_nr="0" -s wall_thickness="0.8" -s support_bottom_distance="0" -s material_crystallinity="False" -s machine_steps_per_mm_e="1600" -s dual="0" -s support_bottom_enable="False" -s wireframe_nozzle_clearance="1" -s speed_infill="60" -s machine_nozzle_id="unknown" -s wipe_brush_pos_x="100" -s acceleration_travel_layer_0="5000.0" -s meshfix_maximum_deviation="0.05" -s cool_fan_enabled="True" -s wall_overhang_angle="90" -s cool_fan_speed_max="100.0" -s raft_surface_layers="2" -s skirt_brim_minimal_length="250" -s material_linear_advance_factor="0" -s cool_min_layer_time="5" -s day="Sun" -s wipe_retraction_enable="True" -s travel_avoid_supports="False" -s acceleration_infill="3000" -s material_bed_temperature="63" -s bridge_skin_material_flow_3="110" -s bridge_fan_speed_2="0" -s initial_bottom_layers="8" -s support_interface_pattern="concentric" -s cross_infill_density_image="" -s adaptive_layer_height_variation="0.1" -s infill_wall_line_count="0" -s support_supported_skin_fan_speed="100" -s extruder_prime_pos_y="0" -s machine_name="Wanhao Duplicator i3 Plus" -s retraction_prime_speed="25" -s material_linear_advance_factor_prime_tower="0" -s z_seam_type="sharpest_corner" -s meshfix_keep_open_polygons="False" -s support_use_towers="True" -s infill_support_enabled="False" -s cool_fan_speed_0="0" -s support_brim_line_count="20" -s blackmagic="0" -s material_print_temp_wait="True" -s support_roof_angles="[ ]" -s infill_mesh_order="0" -s support="0" -s spaghetti_infill_enabled="False" -s acceleration_support="3000" -s support_interface_offset="0.0" -s support_tree_enable="False" -s acceleration_wall_0="3000" -s wireframe_top_jump="0.6" -s jerk_support_bottom="20" -s speed_support_bottom="20.0" -s support_conical_min_width="5.0" -s bottom_layers="8" -s material_flow_dependent_temperature="False" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s support_wall_count="0" -s machine_max_acceleration_z="100" -s skin_edge_support_thickness="0" -s coasting_min_volume="0.8" -s material_linear_advance_factor_wall="0" -s cool_fan_full_at_height="0.3" -s draft_shield_dist="10" -s layer_height="0.1" -s material_break_preparation_retracted_position="-16" -s infill_mesh="False" -s mold_angle="40" -s raft_speed="30.0" -s machine_max_jerk_z="0.4" -s support_tree_angle="40" -s wall_line_width_0="0.4" -s cross_infill_pocket_size="4.0" -s machine_max_jerk_e="5.0" -s raft_margin="15" -s raft_surface_speed="30.0" -s infill_enable_travel_optimization="False" -s machine_height="180" -s travel_retract_before_outer_wall="False" -s infill_support_angle="40" -s adaptive_layer_height_variation_step="0.01" -s raft_surface_jerk="20" -s bridge_sparse_infill_max_density="0" -s wireframe_printspeed_flat="5" -s draft_shield_height_limitation="full" -s magic_fuzzy_skin_enabled="False" -s jerk_enabled="False" -s support_mesh_drop_down="True" -s wireframe_roof_fall_down="2" -s wireframe_strategy="compensate" -s machine_gcode_flavor="RepRap (Marlin/Sprinter)" -s conical_overhang_angle="50" -s infill_overlap_mm="0.04" -s mesh_position_z="0" -s travel_speed="120" -s speed="0" -s small_hole_max_size="0" -s material_bed_temp_prepend="True" -s material="0" -s infill_before_walls="True" -s meshfix_maximum_resolution="0.5" -s wipe_repeat_count="5" -s support_tree_branch_distance="1" -s retraction_speed="25" -s gradual_infill_steps="0" -s machine_show_variants="False" -s support_interface_material_flow="100" -s infill_overlap="10" -s jerk_support="20" -s wall_line_width_x="0.4" -s roofing_extruder_nr="-1" -s raft_base_acceleration="3000" -s wall_extruder_nr="-1" -s adaptive_layer_height_threshold="0.2" -s min_skin_width_for_expansion="4.898587196589413e-17" -s material_no_load_move_factor="0.940860215" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s max_skin_angle_for_expansion="90" -s sub_div_rad_add="0.4" -s support_tree_branch_diameter_angle="5" -s top_bottom_pattern_0="lines" -s alternate_extra_perimeter="False" -s support_roof_enable="True" -s bridge_wall_coast="100" -s raft_interface_fan_speed="0" -s support_offset="0" -s wireframe_fall_down="0.5" -s material_flow="100" -s cross_support_density_image="" -s wireframe_height="3" -s z_seam_relative="False" -s support_tower_maximum_supported_diameter="3.0" -s support_interface_extruder_nr="0" -s nozzle_disallowed_areas="[]" -s support_xy_distance="0.7" -s speed_wall="30.0" -s bridge_enable_more_layers="True" -s conical_overhang_enabled="False" -s speed_travel_layer_0="60.0" -s draft_shield_height="10" -s z_seam_x="100.0" -s retraction_combing_max_distance="0" -s support_infill_rate="15" -s spaghetti_max_infill_angle="10" -s acceleration_support_interface="3000" -s machine_feeder_wheel_diameter="10.0" -s retraction_hop_only_when_collides="False" -s extruder_prime_pos_x="0" -s build_volume_temperature="28" -s layer_start_y="0.0" -s material_break_retracted_position="-50" -s material_initial_print_temperature="200" -s support_infill_extruder_nr="0" -s coasting_speed="90" -s carve_multiple_volumes="False" -s flow_rate_extrusion_offset_factor="100" -s acceleration_wall_x="3000" -s skin_overlap_mm="0.02" -s small_feature_max_length="0.0" -s wall_0_extruder_nr="-1" -s material_maximum_park_duration="300" -s machine_nozzle_temp_enabled="True" -s switch_extruder_retraction_amount="16" -s skirt_brim_speed="30.0" -s wipe_retraction_extra_prime_amount="0" -s ironing_only_highest_layer="False" -s acceleration_topbottom="3000" -s machine_settings="0" -s adhesion_extruder_nr="0" -s mold_width="5" -s jerk_support_infill="20" -s wall_overhang_speed_factor="100" -s jerk_prime_tower="20" -s skin_outline_count="1" -s bridge_skin_speed_2="15.0" -s machine_max_feedrate_y="299792458000" -s support_roof_material_flow="100" -s bridge_skin_density_2="75" -s support_tower_diameter="3.0" -s material_linear_advance_factor_support="0" -s command_line_settings="0" -s brim_replaces_support="True" -s prime_tower_wipe_enabled="True" -s fill_perimeter_gaps="everywhere" -s skin_overlap="5" -s print_sequence="all_at_once" -s acceleration_support_infill="3000" -s brim_gap="0" -s spaghetti_infill_extra_volume="0" -s support_connect_zigzags="True" -s adaptive_layer_height_enabled="False" -s travel_compensate_overlapping_walls_enabled="True" -s roofing_pattern="lines" -s fill_outline_gaps="False" -s support_zag_skip_count="8" -s machine_filament_park_distance="16" -s acceleration_print="3000" -s material_linear_advance_factor_wall_x="0" -s material_final_print_temperature="195" -s ooze_shield_angle="60" -s machine_endstop_positive_direction_x="False" -s travel_compensate_overlapping_walls_x_enabled="True" -s coasting_volume="0.064" -s machine_endstop_positive_direction_z="True" -s small_feature_speed_factor_0="50" -s machine_shape="rectangular" -s machine_heated_bed="True" -s machine_use_extruder_offset_to_offset_coords="True" -s brim_outside_only="True" -s material_standby_temperature="150" -s support_bottom_stair_step_height="0.3" -s speed_roofing="30.0" -s roofing_line_width="0.4" -s material_print_temp_prepend="True" -s wireframe_printspeed_down="5" -s minimum_interface_area="1.0" -s draft_shield_enabled="False" -s speed_support="60" -s adhesion_z_offset="0" -s wireframe_roof_outer_delay="0.2" -s ironing_inset="0.2" -s bridge_fan_speed_3="0" -s initial_layer_line_width_factor="100.0" -s machine_start_gcode="" -s experimental="0" -s bridge_wall_min_length="5" -s prime_tower_position_x="195.584" -s wipe_retraction_amount="6.5" -s material_break_temperature="50" -s top_bottom_extruder_nr="-1" -s acceleration_support_roof="3000" -s support_roof_offset="0.0" -s wall_0_material_flow="100" -s wireframe_flow_flat="100" -s speed_print_layer_0="30.0" -s default_material_bed_temperature="60" -s raft_jerk="20" -s machine_end_gcode="" -s machine_center_is_zero="False" -s support_conical_enabled="False" -s material_anti_ooze_retraction_speed="5" -s machine_head_with_fans_polygon="[[-20, 10], [10, 10], [10, -10], [-20, -10]]" -s z_seam_corner="z_seam_corner_inner" -s support_interface_angles="[ ]" -s bottom_thickness="0.8" -s raft_interface_line_spacing="1.0" -s material_flush_purge_length="60" -s machine_nozzle_heat_up_speed="2.0" -s cool_fan_speed_min="100.0" -s wipe_move_distance="20" -s bridge_skin_speed_3="15.0" -s magic_fuzzy_skin_point_dist="0.8" -s filter_out_tiny_gaps="True" -s spaghetti_flow="20" -s machine_heated_build_volume="False" -s extruder_prime_pos_abs="False" -s material_adhesion_tendency="10" -s infill_sparse_thickness="0.1" -s speed_wall_0="30.0" -s machine_extruders_share_heater="False" -s cool_lift_head="False" -s zig_zaggify_infill="False" -s acceleration_enabled="False" -s support_roof_extruder_nr="0" -s layer_start_x="0.0" -s machine_min_cool_heat_time_window="50.0" -s multiple_mesh_overlap="0.15" -s wipe_retraction_retract_speed="25" -s support_bottom_pattern="concentric" -s material_break_preparation_speed="2" -s acceleration_support_bottom="3000" -s material_end_of_filament_purge_length="20" -s wireframe_roof_drag_along="0.8" -s support_bottom_line_distance="0.4" -s wall_min_flow="0" -s ironing_flow="10.0" -s acceleration_prime_tower="3000" -s retraction_hop_after_extruder_switch_height="1" -s skirt_gap="3" -s speed_ironing="20.0" -s machine_max_acceleration_e="10000" -s line_width="0.4" -s zig_zaggify_support="False" -s wipe_hop_enable="False" -s optimize_wall_printing_order="False" -s raft_interface_line_width="0.8" -s gantry_height="180" -s material_surface_energy="100" -s print_bed_temperature="63" -s magic_mesh_surface_mode="normal" -s raft_fan_speed="0" -s wireframe_up_half_speed="0.3" -s machine_max_feedrate_e="299792458000" -s spaghetti_infill_stepped="True" -s raft_surface_fan_speed="0" -s meshfix_union_all_remove_holes="False" -s speed_wall_x="60.0" -s raft_base_jerk="20" -s machine_extruder_count="1" -s jerk_support_roof="20" -s wireframe_top_delay="0" -s machine_endstop_positive_direction_y="False" -s jerk_topbottom="20" -s remove_empty_first_layers="True" -s support_bottom_height="1" -s raft_acceleration="3000" -s jerk_print_layer_0="20" -s wireframe_roof_inset="3" -s material_anti_ooze_retracted_position="-4" -s expand_skins_expand_distance="0.8" -s bridge_wall_speed="15.0" -s support_bottom_offset="0.0" -s wireframe_flat_delay="0.1" -s machine_nozzle_expansion_angle="45" -s brim_line_count="12" -s support_roof_line_distance="0.4" -s prime_tower_line_width="0.4" -s infill_line_width="0.4" -s magic_fuzzy_skin_outside_only="False" -s speed_equalize_flow_max="150" -s jerk_roofing="20" -s raft_base_line_width="0.8" -s coasting_enable="False" -s support_interface_line_width="0.4" -s support_bottom_angles="[ ]" -s support_skip_zag_per_mm="20" -s support_extruder_nr_layer_0="0" -s meshfix_maximum_travel_resolution="0.8" -s cool_min_speed="10" -s machine_disallowed_areas="[]" -s support_interface_enable="False" -s bridge_skin_density_3="80" -s machine_max_feedrate_z="299792458000" -s support_roof_density="100" -s spaghetti_max_height="2.0" -s skirt_line_count="4" -s retraction_count_max="90" -s retraction_extrusion_window="6.5" -s support_fan_enable="False" -s support_roof_pattern="concentric" -s support_mesh="False" -s wireframe_straight_before_down="20" -s material_print_temperature="210" -s retraction_extra_prime_amount="0" -s wireframe_printspeed="5" -s machine_steps_per_mm_y="50" -s support_tree_branch_diameter="2" -s speed_slowdown_layers="2" -s default_material_print_temperature="210" -s roofing_layer_count="0" -s relative_extrusion="False" -s wall_0_inset="0" -s brim_width="8.0" -s speed_support_infill="60" -s raft_base_line_spacing="1.6" -s max_extrusion_before_wipe="10" -s ironing_pattern="zigzag" -s speed_travel="120" -s support_angle="70" -s raft_base_speed="22.5" -s layer_0_z_overlap="0.15" -s speed_z_hop="10" -s platform_adhesion="0" -s support_bottom_stair_step_width="5.0" -s raft_interface_jerk="20" -s material_shrinkage_percentage="0" -s ironing_line_spacing="0.1" -s skin_line_width="0.4" -s connect_infill_polygons="False" -s wireframe_bottom_delay="0" -s mesh_position_y="0" -s infill_randomize_start_location="False" -s machine_nozzle_head_distance="3" -s support_brim_width="8.0" -s top_layers="8" -s support_infill_sparse_thickness="0.1" -s material_bed_temperature_layer_0="63" -s clean_between_layers="False" -s travel="0" -s material_bed_temp_wait="True" -s raft_airgap="0.3" -s material_flush_purge_speed="0.5" -s support_enable="False" -s prime_tower_enable="False" -s raft_surface_thickness="0.1" -s jerk_skirt_brim="20" -s machine_heat_zone_length="16" -s gradual_infill_step_height="1.5" -s outer_inset_first="False" -s prime_tower_brim_enable="False" -s top_skin_preshrink="0.8" -s top_skin_expand_distance="0.8" -s jerk_print="20" -s mold_roof_height="0.5" -s jerk_ironing="20" -s roofing_angles="[ ]" -s support_top_distance="0.1" -s retraction_hop_after_extruder_switch="True" -s material_linear_advance_factor_skirt_brim="0" -s layer_height_0="0.3" -s switch_extruder_retraction_speeds="20" -s machine_firmware_retract="False" -s meshfix_union_all="True" -s support_z_distance="0.1" -s bridge_settings_enabled="False" -s z_seam_y="200" -s acceleration_layer_0="3000" -s raft_interface_thickness="0.15000000000000002" -s wall_line_count="2" -s magic_fuzzy_skin_point_density="1.25" -s top_bottom_thickness="0.8" -s machine_width="200" -s prime_tower_flow="100" -s acceleration_ironing="3000" -s raft_base_fan_speed="0" -s support_tree_collision_resolution="0.2" -s skin_no_small_gaps_heuristic="False" -s wipe_hop_amount="1" -s support_join_distance="2.0" -s machine_buildplate_type="glass" -s time="11:27:41" -s infill_material_flow="100" -s wireframe_enabled="False" -s material_linear_advance_factor_topbottom="0" -s wipe_retraction_prime_speed="25" -s wipe_pause="0" -s bridge_skin_support_threshold="50" -e0 -s switch_extruder_retraction_speeds="20" -s support_interface_density="100" -s cool_fan_speed="80" -s raft_base_thickness="0.36" -s machine_nozzle_offset_x="0" -s initial_layer_line_width_factor="104.0" -s bridge_skin_material_flow="60" -s material_end_of_filament_purge_speed="0.5" -s retraction_retract_speed="65" -s speed_layer_0="12" -s infill="0" -s small_feature_speed_factor="50" -s support_infill_sparse_thickness="0.1" -s speed_prime_tower="30" -s support_brim_enable="False" -s infill_multiplier="1" -s gradual_support_infill_steps="0" -s infill_sparse_density="20" -s bottom_skin_expand_distance="1.6" -s machine_nozzle_cool_down_speed="2.0" -s infill_offset_x="0" -s limit_support_retractions="True" -s machine_extruder_end_pos_x="0" -s infill_offset_y="0" -s acceleration_print_layer_0="3000" -s wall_min_flow_retract="False" -s speed_support_roof="20.0" -s xy_offset_layer_0="0" -s z_seam_position="back" -s material_guid="0ff92885-617b-4144-a03c-9989872454bc" -s material_linear_advance_factor_support_interface="0" -s material_linear_advance_factor_infill="0" -s material_break_preparation_speed="2" -s acceleration_support_bottom="3000" -s material_end_of_filament_purge_length="20" -s gradual_support_infill_step_height="1" -s support_conical_angle="30" -s raft_surface_acceleration="3000" -s support_roof_pattern="concentric" -s jerk_layer_0="20" -s support_pattern="lines" -s jerk_infill="20" -s speed_equalize_flow_enabled="False" -s top_thickness="0.8" -s bottom_skin_preshrink="1.6" -s raft_surface_line_spacing="0.4" -s skin_edge_support_layers="0" -s wall_line_width="0.4" -s xy_offset="0" -s travel_avoid_other_parts="True" -s raft_interface_speed="11.25" -s travel_avoid_distance="0.625" -s support_interface_height="1" -s wipe_move_distance="20" -s cool_fan_speed_min="80" -s acceleration_skirt_brim="3000" -s meshfix="0" -s support_bottom_material_flow="100" -s acceleration_wall="3000" -s ironing_enabled="False" -s acceleration_travel="5000" -s support_supported_skin_fan_speed="100" -s infill_wall_line_count="0" -s support_wall_count="0" -s skin_edge_support_thickness="0" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s experimental="0" -s support_skip_some_zags="False" -s travel_compensate_overlapping_walls_0_enabled="True" -s support_bottom_line_width="0.4" -s material_flow="100" -s support_offset="0" -s raft_smoothing="5" -s speed_topbottom="15.0" -s wipe_hop_enable="False" -s zig_zaggify_support="False" -s speed_print="30" -s prime_tower_min_volume="6" -s jerk_travel="30" -s material_linear_advance_factor_skirt_brim="0" -s support_tree_branch_diameter="2" -s machine_steps_per_mm_y="50" -s acceleration_support_interface="3000" -s spaghetti_max_infill_angle="10" -s bridge_wall_material_flow="50" -s wipe_hop_speed="10" -s jerk_wall_0="20" -s retraction_hop="1" -s wipe_pause="0" -s wipe_retraction_prime_speed="65" -s minimum_support_area="0.0" -s material_linear_advance_factor_wall_0="0" -s wall_0_wipe_dist="0.2" -s switch_extruder_extra_prime_amount="0" -s support_tower_maximum_supported_diameter="3.0" -s spaghetti_infill_extra_volume="0" -s support_connect_zigzags="True" -s support_xy_distance_overhang="0.2" -s bridge_skin_density_3="80" -s support_interface_enable="False" -s resolution="0" -s support_line_width="0.4" -s material_break_preparation_retracted_position="-16" -s support_xy_overrides_z="z_overrides_xy" -s min_infill_area="0" -s machine_nozzle_tip_outer_diameter="1" -s machine_steps_per_mm_x="50" -s infill_angles="[ ]" -s minimum_interface_area="1.0" -s skirt_brim_line_width="0.4" -s top_bottom_pattern="lines" -s cool_fan_full_layer="2" -s center_object="False" -s spaghetti_inset="0.2" -s gradual_infill_steps="0" -s jerk_travel_layer_0="30.0" -s mold_enabled="False" -s raft_surface_line_width="0.4" -s cooling="0" -s support_tree_collision_resolution="0.2" -s raft_base_fan_speed="0" -s material_print_temperature_layer_0="217" -s raft_interface_line_spacing="1.0" -s machine_nozzle_heat_up_speed="2.0" -s material_flush_purge_length="60" -s bridge_skin_material_flow_2="100" -s speed_support_interface="20.0" -s support_interface_offset="0.0" -s jerk_support="20" -s wall_line_width_x="0.4" -s support_line_distance="2.6666666666666665" -s retraction_enable="True" -s switch_extruder_retraction_speed="20" -s retraction_hop_enabled="False" -s acceleration_roofing="3000" -s cool_min_layer_time_fan_speed_max="10" -s wipe_retraction_speed="65" -s retraction_amount="2.5" -s raft_speed="15.0" -s mold_angle="40" -s material_flow_layer_0="100" -s wall_material_flow="100" -s bridge_skin_material_flow_3="110" -s bridge_fan_speed_2="0" -s initial_bottom_layers="6" -s support_interface_pattern="concentric" -s connect_skin_polygons="False" -s infill_pattern="grid" -s material_flow_dependent_temperature="False" -s bottom_layers="6" -s magic_fuzzy_skin_thickness="0.3" -s meshfix_extensive_stitching="False" -s infill_wipe_dist="0.1" -s machine_extruder_start_pos_abs="False" -s skirt_brim_material_flow="100" -s bridge_skin_speed="10" -s jerk_wall_x="20" -s wipe_retraction_amount="2.5" -s material_break_temperature="50" -s support_roof_height="1.2" -s magic_fuzzy_skin_enabled="False" -s connect_infill_polygons="False" -s machine_extruder_start_code="" -s support_material_flow="100" -s bridge_fan_speed="100" -s bridge_sparse_infill_max_density="0" -s wall_thickness="0.8" -s support_bottom_distance="0" -s material_crystallinity="False" -s machine_steps_per_mm_e="1600" -s jerk_wall="20" -s dual="0" -s support_bottom_enable="False" -s skin_overlap="5" -s speed_infill="30" -s machine_nozzle_id="unknown" -s wipe_brush_pos_x="100" -s acceleration_travel_layer_0="5000.0" -s raft_surface_layers="2" -s skirt_brim_minimal_length="250" -s material_linear_advance_factor="0" -s cool_min_layer_time="5" -s wipe_retraction_enable="True" -s travel_avoid_supports="False" -s acceleration_infill="3000" -s speed_ironing="10.0" -s support_roof_line_width="0.4" -s extruder_prime_pos_y="0" -s material_linear_advance_factor_prime_tower="0" -s retraction_prime_speed="65" -s z_seam_type="sharpest_corner" -s prime_blob_enable="False" -s meshfix_keep_open_polygons="False" -s raft_surface_speed="15.0" -s infill_enable_travel_optimization="False" -s machine_nozzle_temp_enabled="True" -s switch_extruder_retraction_amount="16" -s skirt_brim_speed="12" -s material_maximum_park_duration="300" -s infill_material_flow="100" -s support_use_towers="True" -s infill_support_enabled="False" -s cool_fan_speed_0="0" -s support_brim_line_count="20" -s blackmagic="0" -s multiple_mesh_overlap="0.15" -s wipe_retraction_retract_speed="65" -s material_linear_advance_factor_wall_x="0" -s acceleration_print="3000" -s support_bottom_pattern="concentric" -s meshfix_maximum_deviation="0.05" -s cool_fan_enabled="True" -s wall_overhang_angle="90" -s cool_fan_speed_max="80" -s machine_extruder_end_code="" -s support_roof_angles="[ ]" -s retraction_hop_after_extruder_switch_height="1" -s machine_extruder_end_pos_abs="False" -s support="0" -s spaghetti_infill_enabled="False" -s acceleration_support="3000" -s acceleration_wall_0="3000" -s jerk_support_bottom="20" -s material_extrusion_cool_down_speed="0.7" -s speed_support_bottom="20.0" -s support_conical_min_width="5.0" -s coasting_min_volume="0.8" -s material_linear_advance_factor_wall="0" -s cool_fan_full_at_height="0.3" -s support_infill_angles="[ ]" -s shell="0" -s support_tower_diameter="3.0" -s machine_extruder_start_pos_x="0" -s wipe_hop_amount="1" -s support_join_distance="2.0" -s support_tree_angle="40" -s fill_perimeter_gaps="everywhere" -s prime_tower_wipe_enabled="True" -s machine_heat_zone_length="16" -s jerk_skirt_brim="20" -s raft_jerk="20" -s speed_print_layer_0="12" -s command_line_settings="0" -s material_linear_advance_factor_support="0" -s conical_overhang_angle="50" -s infill_overlap_mm="0.05600000000000001" -s mesh_position_z="0" -s speed="0" -s material_diameter="1.75" -s meshfix_union_all_remove_holes="False" -s gradual_infill_step_height="1.5" -s cool_lift_head="False" -s speed_wall_0="15.0" -s outer_inset_first="False" -s extruder_prime_pos_z="0" -s support_tower_roof_angle="65" -s meshfix_maximum_resolution="0.5" -s wipe_repeat_count="5" -s support_tree_branch_distance="1" -s wall_x_material_flow="100" -s min_skin_width_for_expansion="3.67394039744206e-17" -s material_no_load_move_factor="0.940860215" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s max_skin_angle_for_expansion="90" -s top_bottom_pattern_0="lines" -s alternate_extra_perimeter="False" -s support_roof_enable="True" -s slicing_tolerance="exclusive" -s machine_extruder_end_pos_y="0" -s cross_support_density_image="" -s z_seam_relative="False" -s support_xy_distance="0.7" -s speed_wall="15.0" -s material_final_print_temperature="202" -s machine_endstop_positive_direction_x="False" -s bridge_enable_more_layers="True" -s conical_overhang_enabled="False" -s speed_travel_layer_0="60.0" -s fill_outline_gaps="False" -s machine_filament_park_distance="16" -s support_zag_skip_count="8" -s material_break_retracted_position="-50" -s material_initial_print_temperature="207" -s switch_extruder_prime_speed="20" -s extruder_prime_pos_x="0" -s layer_start_y="0.0" -s filter_out_tiny_gaps="True" -s bridge_skin_speed_3="10" -s spaghetti_flow="20" -s magic_fuzzy_skin_point_dist="0.8" -s coasting_speed="90" -s skin_material_flow="100" -s support_bottom_density="100" -s acceleration_wall_x="3000" -s skin_overlap_mm="0.02" -s small_feature_max_length="0.0" -s support_initial_layer_line_distance="2.6666666666666665" -s support_bottom_offset="0.0" -s bridge_wall_speed="10" -s meshfix_union_all="True" -s support_z_distance="0.1" -s infill_line_distance="4.0" -s minimum_bottom_area="1.0" -s retraction_combing_max_distance="0" -s z_seam_x="100.0" -s expand_skins_expand_distance="1.6" -s mesh_position_x="0" -s wipe_retraction_extra_prime_amount="0" -s jerk_support_roof="20" -s machine_endstop_positive_direction_y="False" -s coasting_volume="0.064" -s machine_endstop_positive_direction_z="True" -s small_feature_speed_factor_0="50" -s infill_support_angle="40" -s raft_surface_jerk="20" -s support_interface_skip_height="0.3" -s mold_width="5" -s infill_before_walls="True" -s material="0" -s jerk_support_infill="20" -s wall_overhang_speed_factor="100" -s jerk_prime_tower="20" -s skin_outline_count="1" -s material_anti_ooze_retraction_speed="5" -s support_conical_enabled="False" -s bridge_skin_speed_2="10" -s retract_at_layer_change="False" -s raft_base_jerk="20" -s speed_wall_x="30.0" -s support_roof_material_flow="100" -s bridge_skin_density_2="75" -s brim_replaces_support="True" -s acceleration_support_infill="3000" -s brim_gap="0" -s travel_compensate_overlapping_walls_enabled="True" -s roofing_pattern="lines" -s travel_compensate_overlapping_walls_x_enabled="True" -s wall_line_width_0="0.4" -s cross_infill_pocket_size="4.0" -s raft_margin="15" -s support_bottom_stair_step_height="0.3" -s brim_outside_only="True" -s material_standby_temperature="175" -s speed_roofing="15.0" -s roofing_line_width="0.4" -s speed_support="30" -s ironing_inset="0.2" -s bridge_fan_speed_3="0" -s support_tree_branch_diameter_angle="5" -s support_infill_rate="15" -s infill_randomize_start_location="False" -s mesh_position_y="0" -s wall_line_count="4" -s magic_fuzzy_skin_point_density="1.25" -s platform_adhesion="0" -s support_bottom_stair_step_width="5.0" -s speed_z_hop="10" -s retraction_speed="65" -s wall_0_material_flow="100" -s cool_min_speed="10" -s bridge_skin_density="100" -s raft_base_line_width="0.8" -s machine_nozzle_offset_y="0" -s extruder_nr="0" -s infill_overlap="14" -s support_interface_material_flow="100" -s magic_mesh_surface_mode="normal" -s raft_fan_speed="0" -s raft_interface_line_width="0.8" -s material_surface_energy="100" -s retraction_extrusion_window="2.5" -s support_fan_enable="False" -s machine_extruder_start_pos_y="0" -s extruder_prime_pos_abs="False" -s material_adhesion_tendency="0" -s infill_sparse_thickness="0.1" -s skin_no_small_gaps_heuristic="False" -s machine_nozzle_head_distance="3" -s support_brim_width="8.0" -s top_layers="6" -s material_break_preparation_temperature="217" -s layer_start_x="0.0" -s machine_min_cool_heat_time_window="50.0" -s support_bottom_line_distance="0.4" -s zig_zaggify_infill="False" -s wall_min_flow="0" -s ironing_flow="10.0" -s support_roof_offset="0.0" -s acceleration_support_roof="3000" -s acceleration_prime_tower="3000" -s skirt_gap="3" -s line_width="0.4" -s optimize_wall_printing_order="False" -s raft_acceleration="3000" -s support_bottom_height="1" -s raft_base_acceleration="3000" -s skirt_line_count="4" -s retraction_count_max="90" -s ironing_only_highest_layer="False" -s acceleration_topbottom="3000" -s machine_settings="0" -s small_hole_max_size="0" -s brim_line_count="12" -s support_roof_line_distance="0.4" -s infill_line_width="0.4" -s magic_fuzzy_skin_outside_only="False" -s prime_tower_line_width="0.4" -s jerk_print_layer_0="20" -s material_anti_ooze_retracted_position="-4" -s support_interface_angles="[ ]" -s bottom_thickness="0.8" -s speed_equalize_flow_max="150" -s jerk_roofing="20" -s minimum_roof_area="1.0" -s machine_extruder_cooling_fan_number="0" -s machine_nozzle_size="0.4" -s raft_interface_jerk="20" -s material_shrinkage_percentage="0" -s support_roof_density="100" -s spaghetti_max_height="2.0" -s bridge_skin_support_threshold="50" -s material_linear_advance_factor_topbottom="0" -s material_print_temperature="217" -s retraction_extra_prime_amount="0" -s default_material_print_temperature="200" -s roofing_layer_count="0" -s wall_0_inset="0" -s brim_width="8.0" -s speed_support_infill="30" -s raft_base_line_spacing="1.6" -s max_extrusion_before_wipe="10" -s roofing_material_flow="100" -s prime_tower_flow="100" -s acceleration_ironing="3000" -s raft_interface_acceleration="3000" -s spaghetti_infill_stepped="True" -s raft_surface_fan_speed="0" -s jerk_print="20" -s z_seam_y="200" -s retraction_min_travel="0.8" -s acceleration_layer_0="3000" -s material_break_speed="25" -s ironing_line_spacing="0.1" -s raft_airgap="0.3" -s material_flush_purge_speed="0.5" -s skin_line_width="0.4" -s machine_steps_per_mm_z="50" -s skin_angles="[ ]" -s skin_preshrink="1.6" -s clean_between_layers="False" -s travel="0" -s raft_surface_thickness="0.1" -s top_skin_preshrink="1.6" -s jerk_support_interface="20" -s cross_infill_density_image="" -s support_interface_line_width="0.4" -s support_skip_zag_per_mm="20" -s support_bottom_angles="[ ]" -s ironing_pattern="zigzag" -s speed_travel="150" -s support_angle="70" -s raft_base_speed="11.25" -s layer_0_z_overlap="0.15" -s top_skin_expand_distance="1.6" -s sub_div_rad_add="0.4" -s z_seam_corner="z_seam_corner_inner" -s roofing_angles="[ ]" -s jerk_ironing="20" -s top_bottom_thickness="0.8" -s support_top_distance="0.1" -s retraction_hop_after_extruder_switch="True" -s jerk_topbottom="20" -s bridge_wall_coast="100" -s raft_interface_fan_speed="0" -s raft_interface_thickness="0.15000000000000002" -s meshfix_maximum_travel_resolution="0.8" -s machine_feeder_wheel_diameter="10.0" -s retraction_hop_only_when_collides="False" -s coasting_enable="False" -s mold_roof_height="0.5" -g -e0 -l "0" -s extruder_nr="0"
2020-03-01 11:27:49,333 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 347 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 11:27:49,576 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-01 11:27:49,579 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-01 11:27:49,597 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [663]: Slicing took 8.098896026611328 seconds
2020-03-01 11:27:49,598 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [664]: Number of models per buildplate: {0: 1}
2020-03-01 11:27:49,598 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [678]: See if there is more to slice...
2020-03-01 11:27:49,812 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [181]: Socket state changed to Closing
2020-03-01 11:27:49,815 - DEBUG - [MainThread] UM.Backend.Backend._onSocketError [203]: Socket debug: Arcus Error (13): Closing socket because other side requested close.
2020-03-01 11:27:49,818 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [183]: Socket state changed to Closed
2020-03-01 11:27:49,818 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onBackendQuit [829]: Backend quit with return code 0. Resetting process and socket.
2020-03-01 11:30:02,473 - DEBUG - [MainThread] LinearAdvanceSettingPlugin.LinearAdvanceSettingPlugin._filterGcode [109]: No used extruders specify a linear advance factor
2020-03-01 11:30:02,704 - DEBUG - [MainThread] UM.Controller.setActiveStage [149]: Setting active stage to MonitorStage
2020-03-01 11:30:02,755 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:211: Error: Cannot assign [undefined] to QString
2020-03-01 11:30:02,807 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._processRequest [308]: Request [b4c5529e4c2e42d0a7b820be8184847c] started
2020-03-01 11:30:02,810 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-01 11:30:03,559 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestFinished [369]: Request [b4c5529e4c2e42d0a7b820be8184847c] finished.
2020-03-01 11:30:03,562 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-01 11:30:03,564 - INFO - [MainThread] SliceInfoPlugin.SliceInfo._onRequestFinished [275]: SliceInfo sent successfully
2020-03-01 11:30:08,664 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-03-01 11:30:12,754 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-03-01 11:30:38,768 - DEBUG - [MainThread] UM.Message._onInactivityTriggered [88]: Hiding message because of inactivity
2020-03-01 11:31:55,884 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [772]: Resource created on OctoPrint instance: http://192.168.2.140/api/files/local/WDI3P_Plier_Holder_2.0.gcode
2020-03-01 11:32:25,758 - DEBUG - [MainThread] UM.Message._onInactivityTriggered [88]: Hiding message because of inactivity
2020-03-01 11:51:40,052 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Darth Pooky"._octoprint._tcp.local
2020-03-01 11:52:00,018 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Blue Leader"._octoprint._tcp.local
2020-03-01 11:52:19,987 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Orange Leader"._octoprint._tcp.local
2020-03-01 13:07:01,177 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Blue Leader"._octoprint._tcp.local
2020-03-01 14:20:09,516 - DEBUG - [MainThread] UM.Controller.setActiveStage [149]: Setting active stage to PrepareStage
2020-03-01 14:20:09,554 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-01 14:20:09,627 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-01 14:20:09,630 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-01 14:20:09,638 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/plugins/plugins/PrepareStage/PrepareMain.qml:16:5: QML ActionPanelWidget: Binding loop detected for property "width"
2020-03-01 14:20:09,657 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:79: ReferenceError: stop is not defined
2020-03-01 14:20:09,660 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:63: TypeError: Cannot read property of null
2020-03-01 14:20:09,663 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:91: TypeError: Cannot read property of null
2020-03-01 14:20:09,666 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:102: TypeError: Cannot read property of null
2020-03-01 14:20:09,669 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:103: TypeError: Cannot read property of null
2020-03-01 14:20:09,671 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:139: TypeError: Cannot read property of null
2020-03-01 14:20:09,674 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:140: TypeError: Cannot read property of null
2020-03-01 14:20:09,677 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:120: TypeError: Cannot read property of null
2020-03-01 14:20:09,680 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:122: TypeError: Cannot read property of null
2020-03-01 14:20:09,682 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-03-01 14:20:09,685 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:36: TypeError: Cannot read property of null
2020-03-01 14:20:09,687 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:37: TypeError: Cannot read property of null
2020-03-01 14:20:09,689 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:49: TypeError: Cannot read property of null
2020-03-01 14:20:09,692 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:59: TypeError: Cannot read property of null
2020-03-01 14:20:09,694 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:61: TypeError: Cannot read property of null
2020-03-01 14:20:09,697 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:63: TypeError: Cannot read property of null
2020-03-01 14:20:09,699 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ExtruderBox.qml:20: TypeError: Cannot read property of null
2020-03-01 14:20:09,702 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:29: TypeError: Cannot read property of null
2020-03-01 14:20:09,704 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:30: TypeError: Cannot read property of null
2020-03-01 14:20:09,706 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:40: TypeError: Cannot read property of null
2020-03-01 14:20:09,709 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:73: TypeError: Cannot read property of null
2020-03-01 14:20:09,711 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:135: TypeError: Cannot read property of null
2020-03-01 14:20:09,713 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:246: TypeError: Cannot read property of null
2020-03-01 14:20:09,716 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:247: TypeError: Cannot read property of null
2020-03-01 14:20:09,718 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:173: TypeError: Cannot read property of null
2020-03-01 14:20:09,720 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:175: TypeError: Cannot read property of null
2020-03-01 14:20:09,723 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:190: TypeError: Cannot read property of null
2020-03-01 14:20:09,725 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:193: TypeError: Cannot read property of null
2020-03-01 14:20:09,728 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:60: TypeError: Cannot read property of null
2020-03-01 14:20:09,731 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:248: TypeError: Cannot read property of null
2020-03-01 14:20:09,733 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:294: TypeError: Cannot read property of null
2020-03-01 14:20:09,736 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:26: TypeError: Cannot read property of null
2020-03-01 14:20:09,739 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:27: TypeError: Cannot read property of null
2020-03-01 14:20:09,742 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:388: TypeError: Cannot read property of null
2020-03-01 14:20:09,745 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:390: TypeError: Cannot read property of null
2020-03-01 14:20:09,747 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:391: TypeError: Cannot read property of null
2020-03-01 14:20:09,750 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:26: TypeError: Cannot read property of null
2020-03-01 14:20:09,752 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:27: TypeError: Cannot read property of null
2020-03-01 14:20:09,754 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:24: TypeError: Cannot read property of null
2020-03-01 14:20:09,757 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:30: TypeError: Cannot read property of null
2020-03-01 14:20:09,760 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:39: TypeError: Cannot read property of null
2020-03-01 14:20:09,762 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:24: TypeError: Cannot read property of null
2020-03-01 14:20:09,765 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:30: TypeError: Cannot read property of null
2020-03-01 14:20:09,768 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:39: TypeError: Cannot read property of null
2020-03-01 14:20:09,775 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:24: TypeError: Cannot read property of null
2020-03-01 14:20:09,778 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:30: TypeError: Cannot read property of null
2020-03-01 14:20:09,780 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:39: TypeError: Cannot read property of null
2020-03-01 14:20:09,783 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupTooltip.qml:67: TypeError: Cannot read property of null
2020-03-01 14:20:09,785 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupTooltip.qml:69: TypeError: Cannot read property of null
2020-03-01 14:20:09,788 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupTooltip.qml:71: TypeError: Cannot read property of null
2020-03-01 14:20:09,791 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:150: TypeError: Cannot read property of null
2020-03-01 14:20:09,793 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-03-01 14:20:09,796 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:166: TypeError: Cannot read property of null
2020-03-01 14:20:09,798 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:167: TypeError: Cannot read property of null
2020-03-01 14:20:09,801 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:178: TypeError: Cannot read property of null
2020-03-01 14:20:09,804 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:231: TypeError: Cannot read property of null
2020-03-01 14:20:09,807 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:241: TypeError: Cannot read property of null
2020-03-01 14:20:14,423 - INFO - [MainThread] UM.Controller.deleteAllNodesWithMeshData [386]: Clearing scene
2020-03-01 14:20:14,434 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-01 14:20:14,437 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-01 14:20:14,453 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: GroupedOp.(#=1) <UM.Operations.RemoveSceneNodeOperation.RemoveSceneNodeOperation object at 0x600020741cd8>, took 5ms
2020-03-01 14:20:14,456 - INFO - [MainThread] cura.CuraApplication._removeNodesWithLayerData [1900]: Clearing scene
2020-03-01 14:20:15,235 - WARNING - [MainThread] cura.UI.PrintInformation.setBaseName [360]: Unsupported Mime Type Database file extension 
2020-03-01 14:20:19,960 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-03-01 14:20:36,916 - INFO - [Thread-4] STLReader.STLReader.load_file [51]: Using NumPy-STL to load STL data.
2020-03-01 14:20:36,924 - DEBUG - [Thread-4] UM.Mesh.MeshData.calculateNormalsFromVertices [495]: Calculating normals took 0.00045418739318847656 seconds
2020-03-01 14:20:36,925 - DEBUG - [Thread-4] STLReader.STLReader._read [102]: Loaded a mesh with 16938 vertices
2020-03-01 14:20:36,935 - DEBUG - [Thread-4] UM.Mesh.MeshData.approximateConvexHull [452]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.005664825439453125 seconds. 133 input vertices. 133 output vertices.
2020-03-01 14:20:36,941 - DEBUG - [Thread-4] UM.FileHandler.ReadFileJob.run [71]: Loading file took 0.0 seconds
2020-03-01 14:20:36,954 - DEBUG - [Thread-4] UM.Mesh.MeshData.approximateConvexHull [452]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.0076639652252197266 seconds. 134 input vertices. 134 output vertices.
2020-03-01 14:20:37,000 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: <UM.Operations.AddSceneNodeOperation.AddSceneNodeOperation object at 0x6000180d9258>, took 21ms
2020-03-01 14:20:41,234 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-03-01 14:20:46,959 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-03-01 14:21:07,938 - INFO - [MainThread] cura.UI.MachineActionManager.addDefaultMachineActions [56]: Default machine actions have been added for machine definition [wanhao_i3plus], do nothing.
2020-03-01 14:21:07,947 - WARNING - [MainThread] cura.Settings.GlobalStack.addExtruder [179]: Extruder [wanhao_i3plus_extruder_0 #2] has already been added to this stack [Wanhao Duplicator i3 Plus]
2020-03-01 14:21:07,950 - WARNING - [MainThread] cura.Settings.ExtruderManager.registerExtruder [156]: Extruder [wanhao_i3plus_extruder_0 #2] has already been registered on machine [Wanhao Duplicator i3 Plus], not doing anything
2020-03-01 14:21:07,954 - INFO - [MainThread] UM.Logger.info [112]: Initializing Active Machine...
2020-03-01 14:21:08,090 - WARNING - [MainThread] UM.OutputDevice.OutputDeviceManager.removeOutputDevice [179]: Could not find output device with id BlueLeader to remove
2020-03-01 14:21:08,092 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-01 14:21:08,214 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device OrangeLeader already added
2020-03-01 14:21:08,216 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device OrangeLeader already added
2020-03-01 14:21:08,217 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [303]: Connection with instance OrangeLeader with url http://192.168.2.162:80/ started
2020-03-01 14:21:08,229 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/SettingsMenu.qml:51: TypeError: Cannot read property 'isEnabled' of undefined
2020-03-01 14:21:08,231 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/SettingsMenu.qml:44: TypeError: Cannot read property 'isEnabled' of undefined
2020-03-01 14:21:08,235 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/MaterialMenu.qml:26: TypeError: Cannot read property 'isEnabled' of undefined
2020-03-01 14:21:08,237 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/MaterialMenu.qml:28: TypeError: Cannot read property 'material' of undefined
2020-03-01 14:21:08,240 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-01 14:21:08,304 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-01 14:21:08,321 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-01 14:21:08,324 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-01 14:21:08,769 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device OrangeLeader already added
2020-03-01 14:21:08,771 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device OrangeLeader already added
2020-03-01 14:21:08,774 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device OrangeLeader already added
2020-03-01 14:21:08,822 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [135]: New error check scheduled.
2020-03-01 14:21:09,350 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-01 14:21:09,358 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [63]: Updating QualityProfilesDropDownMenuModel.
2020-03-01 14:21:09,902 - INFO - [MainThread] cura.Machines.MachineErrorChecker._setResult [187]: Error check finished, result = False, time = 1.1s
2020-03-01 14:21:09,906 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [741]: Set OctoPrint camera url to http://192.168.2.162:80/webcam/?action=stream
2020-03-01 14:21:10,565 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [225]: Starting to slice...
2020-03-01 14:21:10,566 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [243]: Going to slice build plate [0]!
2020-03-01 14:21:10,572 - DEBUG - [MainThread] UM.Backend.Backend._createSocket [213]: Previous socket existed. Closing that first.
2020-03-01 14:21:10,586 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [173]: Socket state changed to Listening
2020-03-01 14:21:10,654 - INFO - [MainThread] UM.Backend.Backend.startEngine [81]: Started engine process: /Applications/Ultimaker Cura 3.app/Contents/MacOS/CuraEngine
2020-03-01 14:21:10,805 - DEBUG - [MainThread] UM.Backend.Backend._backendLog [101]: [Backend] Calling engine with: ['/Applications/Ultimaker Cura 3.app/Contents/MacOS/CuraEngine', 'connect', '127.0.0.1:49674', '']
2020-03-01 14:21:10,826 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-03-01 14:21:10,828 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [177]: Socket state changed to Connected
2020-03-01 14:21:10,831 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] Cura_SteamEngine version 4.5.0
2020-03-01 14:21:10,839 - DEBUG - [MainThread] UM.Backend.Backend._onSocketStateChanged [167]: Backend connected on port 49674
2020-03-01 14:21:10,845 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] Copyright (C) 2019 Ultimaker
2020-03-01 14:21:10,864 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-03-01 14:21:10,868 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] This program is free software: you can redistribute it and/or modify
2020-03-01 14:21:10,872 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] it under the terms of the GNU Affero General Public License as published by
2020-03-01 14:21:10,876 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] the Free Software Foundation, either version 3 of the License, or
2020-03-01 14:21:10,878 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] (at your option) any later version.
2020-03-01 14:21:10,881 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-03-01 14:21:10,884 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] This program is distributed in the hope that it will be useful,
2020-03-01 14:21:10,886 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] but WITHOUT ANY WARRANTY; without even the implied warranty of
2020-03-01 14:21:10,888 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
2020-03-01 14:21:10,891 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] GNU Affero General Public License for more details.
2020-03-01 14:21:10,893 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-03-01 14:21:10,896 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] You should have received a copy of the GNU Affero General Public License
2020-03-01 14:21:10,898 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] along with this program.  If not, see <http://www.gnu.org/licenses/>.
2020-03-01 14:21:10,996 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onStartSliceCompleted [429]: Sending slice message took 0.4301168918609619 seconds
2020-03-01 14:21:11,155 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Mesh has overlapping faces!
2020-03-01 14:21:11,161 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING]  -s extruders_enabled_count="1" -s support_interface_density="100" -s cool_fan_speed="100.0" -s raft_base_thickness="0.36" -s bridge_skin_material_flow="60" -s slicing_tolerance="middle" -s material_end_of_filament_purge_speed="0.5" -s prime_tower_size="20" -s retraction_retract_speed="25" -s speed_layer_0="30.0" -s infill="0" -s small_feature_speed_factor="50" -s speed_prime_tower="60" -s support_brim_enable="False" -s infill_multiplier="1" -s gradual_support_infill_steps="0" -s initial_extruder_nr="0" -s infill_extruder_nr="-1" -s infill_sparse_density="20" -s bottom_skin_expand_distance="0.8" -s machine_nozzle_cool_down_speed="2.0" -s infill_offset_x="0" -s machine_depth="200" -s adhesion_z_offset_extensive_processing="False" -s limit_support_retractions="True" -s machine_max_acceleration_y="9000" -s infill_offset_y="0" -s acceleration_print_layer_0="3000" -s wall_min_flow_retract="False" -s speed_support_roof="40.0" -s xy_offset_layer_0="0" -s adhesion_type="skirt" -s z_seam_position="back" -s material_guid="" -s magic_spiralize="False" -s material_linear_advance_factor_support_interface="0" -s machine_max_acceleration_x="9000" -s material_linear_advance_factor_infill="0" -s print_temperature="210" -s skin_angles="[ ]" -s gradual_support_infill_step_height="1" -s support_conical_angle="30" -s raft_surface_acceleration="3000" -s jerk_layer_0="20" -s machine_max_feedrate_x="299792458000" -s support_pattern="lines" -s jerk_infill="20" -s speed_equalize_flow_enabled="False" -s top_thickness="0.8" -s bottom_skin_preshrink="0.8" -s raft_surface_line_spacing="0.4" -s wall_line_width="0.4" -s xy_offset="0" -s alternate_carve_order="True" -s travel_avoid_other_parts="True" -s raft_interface_speed="22.5" -s travel_avoid_distance="0.625" -s support_interface_height="1" -s jerk_travel_layer_0="30.0" -s date="01-03-2020" -s wireframe_flow="100" -s machine_acceleration="4000" -s machine_minimum_feedrate="0.0" -s skin_preshrink="0.8" -s jerk_wall="20" -s retract_at_layer_change="False" -s jerk_travel="30" -s support_skip_some_zags="False" -s minimum_roof_area="1.0" -s wireframe_flow_connection="100" -s bridge_skin_density="100" -s skirt_brim_line_width="0.4" -s top_bottom_pattern="lines" -s travel_compensate_overlapping_walls_0_enabled="True" -s flow_rate_max_extrusion_offset="0" -s material_diameter="2.85" -s support_bottom_line_width="0.4" -s raft_smoothing="5" -s speed_topbottom="30.0" -s wireframe_drag_along="0.6" -s material_break_speed="25" -s raft_interface_acceleration="3000" -s minimum_polygon_circumference="1.0" -s support_interface_skip_height="0.3" -s speed_print="60" -s skin_edge_support_layers="0" -s support_type="buildplate" -s support_roof_line_width="0.4" -s wireframe_printspeed_bottom="5" -s raft_surface_line_width="0.4" -s prime_tower_min_volume="6" -s prime_blob_enable="False" -s switch_extruder_prime_speed="20" -s wall_x_extruder_nr="-1" -s machine_steps_per_mm_z="50" -s smooth_spiralized_contours="True" -s ooze_shield_dist="2" -s bridge_wall_material_flow="50" -s cool_fan_full_layer="2" -s roofing_material_flow="100" -s wipe_hop_speed="10" -s infill_angles="[ ]" -s infill_line_distance="4.0" -s minimum_bottom_area="1.0" -s minimum_support_area="0.0" -s material_linear_advance_factor_wall_0="0" -s wall_0_wipe_dist="0.2" -s switch_extruder_extra_prime_amount="0" -s material_extrusion_cool_down_speed="0.7" -s wall_x_material_flow="100" -s support_xy_distance_overhang="0.2" -s wireframe_printspeed_up="5" -s resolution="0" -s retraction_hop="1" -s jerk_wall_0="20" -s skin_material_flow="100" -s support_bottom_density="100" -s jerk_support_interface="20" -s material_print_temperature_layer_0="210" -s retraction_min_travel="0.8" -s support_xy_overrides_z="z_overrides_xy" -s min_infill_area="0" -s machine_nozzle_tip_outer_diameter="1" -s machine_steps_per_mm_x="50" -s material_break_preparation_temperature="210" -s machine_nozzle_size="0.4" -s support_initial_layer_line_distance="2.6666666666666665" -s center_object="False" -s spaghetti_inset="0.2" -s mold_enabled="False" -s acceleration_travel="5000" -s acceleration_wall="3000" -s support_bottom_material_flow="100" -s ironing_enabled="False" -s cooling="0" -s support_infill_angles="[ ]" -s shell="0" -s bridge_skin_material_flow_2="100" -s speed_support_interface="40.0" -s meshfix="0" -s acceleration_skirt_brim="3000" -s support_line_distance="2.6666666666666665" -s retraction_enable="True" -s retraction_hop_enabled="False" -s switch_extruder_retraction_speed="20" -s acceleration_roofing="3000" -s anti_overhang_mesh="False" -s cool_min_layer_time_fan_speed_max="10" -s wipe_retraction_speed="25" -s retraction_amount="6.5" -s retraction_combing="all" -s material_flow_layer_0="100" -s wall_material_flow="100" -s extruder_prime_pos_z="0" -s support_tower_roof_angle="65" -s connect_skin_polygons="False" -s infill_pattern="grid" -s magic_fuzzy_skin_thickness="0.3" -s meshfix_extensive_stitching="False" -s infill_wipe_dist="0.1" -s skirt_brim_material_flow="100" -s bridge_skin_speed="15.0" -s mesh_position_x="0" -s prime_tower_position_y="175.6" -s jerk_wall_x="20" -s support_bottom_extruder_nr="0" -s support_roof_height="1.2" -s cutting_mesh="False" -s machine_max_jerk_xy="20.0" -s support_material_flow="100" -s bridge_fan_speed="100" -s support_line_width="0.4" -s ooze_shield_enabled="False" -s support_extruder_nr="0" -s wall_thickness="0.8" -s support_bottom_distance="0" -s material_crystallinity="False" -s machine_steps_per_mm_e="1600" -s dual="0" -s support_bottom_enable="False" -s wireframe_nozzle_clearance="1" -s speed_infill="60" -s machine_nozzle_id="unknown" -s wipe_brush_pos_x="100" -s acceleration_travel_layer_0="5000.0" -s meshfix_maximum_deviation="0.05" -s cool_fan_enabled="True" -s wall_overhang_angle="90" -s cool_fan_speed_max="100.0" -s raft_surface_layers="2" -s skirt_brim_minimal_length="250" -s material_linear_advance_factor="0" -s cool_min_layer_time="5" -s day="Sun" -s wipe_retraction_enable="True" -s travel_avoid_supports="False" -s acceleration_infill="3000" -s material_bed_temperature="64" -s bridge_skin_material_flow_3="110" -s bridge_fan_speed_2="0" -s initial_bottom_layers="8" -s support_interface_pattern="concentric" -s cross_infill_density_image="" -s adaptive_layer_height_variation="0.1" -s infill_wall_line_count="0" -s support_supported_skin_fan_speed="100" -s extruder_prime_pos_y="0" -s machine_name="Wanhao Duplicator i3 Plus" -s retraction_prime_speed="25" -s material_linear_advance_factor_prime_tower="0" -s z_seam_type="sharpest_corner" -s meshfix_keep_open_polygons="False" -s support_use_towers="True" -s infill_support_enabled="False" -s cool_fan_speed_0="0" -s support_brim_line_count="20" -s blackmagic="0" -s material_print_temp_wait="True" -s support_roof_angles="[ ]" -s infill_mesh_order="0" -s support="0" -s spaghetti_infill_enabled="False" -s acceleration_support="3000" -s support_interface_offset="0.0" -s support_tree_enable="False" -s acceleration_wall_0="3000" -s wireframe_top_jump="0.6" -s jerk_support_bottom="20" -s speed_support_bottom="40.0" -s support_conical_min_width="5.0" -s bottom_layers="8" -s material_flow_dependent_temperature="False" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s support_wall_count="0" -s machine_max_acceleration_z="100" -s skin_edge_support_thickness="0" -s coasting_min_volume="0.8" -s material_linear_advance_factor_wall="0" -s cool_fan_full_at_height="0.3" -s draft_shield_dist="10" -s layer_height="0.1" -s material_break_preparation_retracted_position="-16" -s infill_mesh="False" -s mold_angle="40" -s raft_speed="30.0" -s machine_max_jerk_z="0.4" -s support_tree_angle="40" -s wall_line_width_0="0.4" -s cross_infill_pocket_size="4.0" -s machine_max_jerk_e="5.0" -s raft_margin="15" -s raft_surface_speed="30.0" -s infill_enable_travel_optimization="False" -s machine_height="180" -s travel_retract_before_outer_wall="False" -s infill_support_angle="40" -s adaptive_layer_height_variation_step="0.01" -s raft_surface_jerk="20" -s bridge_sparse_infill_max_density="0" -s wireframe_printspeed_flat="5" -s draft_shield_height_limitation="full" -s magic_fuzzy_skin_enabled="False" -s jerk_enabled="False" -s support_mesh_drop_down="True" -s wireframe_roof_fall_down="2" -s wireframe_strategy="compensate" -s machine_gcode_flavor="RepRap (Marlin/Sprinter)" -s conical_overhang_angle="50" -s infill_overlap_mm="0.04" -s mesh_position_z="0" -s travel_speed="120" -s speed="0" -s small_hole_max_size="0" -s material_bed_temp_prepend="True" -s material="0" -s infill_before_walls="True" -s meshfix_maximum_resolution="0.5" -s wipe_repeat_count="5" -s support_tree_branch_distance="1" -s retraction_speed="25" -s gradual_infill_steps="0" -s machine_show_variants="False" -s support_interface_material_flow="100" -s infill_overlap="10" -s jerk_support="20" -s wall_line_width_x="0.4" -s roofing_extruder_nr="-1" -s raft_base_acceleration="3000" -s wall_extruder_nr="-1" -s adaptive_layer_height_threshold="0.2" -s min_skin_width_for_expansion="4.898587196589413e-17" -s material_no_load_move_factor="0.940860215" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s max_skin_angle_for_expansion="90" -s sub_div_rad_add="0.4" -s support_tree_branch_diameter_angle="5" -s top_bottom_pattern_0="lines" -s alternate_extra_perimeter="False" -s support_roof_enable="True" -s bridge_wall_coast="100" -s raft_interface_fan_speed="0" -s support_offset="0" -s wireframe_fall_down="0.5" -s material_flow="100" -s cross_support_density_image="" -s wireframe_height="3" -s z_seam_relative="False" -s support_tower_maximum_supported_diameter="3.0" -s support_interface_extruder_nr="0" -s nozzle_disallowed_areas="[]" -s support_xy_distance="0.7" -s speed_wall="30.0" -s bridge_enable_more_layers="True" -s conical_overhang_enabled="False" -s speed_travel_layer_0="60.0" -s draft_shield_height="10" -s z_seam_x="100.0" -s retraction_combing_max_distance="0" -s support_infill_rate="15" -s spaghetti_max_infill_angle="10" -s acceleration_support_interface="3000" -s machine_feeder_wheel_diameter="10.0" -s retraction_hop_only_when_collides="False" -s extruder_prime_pos_x="0" -s build_volume_temperature="28" -s layer_start_y="0.0" -s material_break_retracted_position="-50" -s material_initial_print_temperature="200" -s support_infill_extruder_nr="0" -s coasting_speed="90" -s carve_multiple_volumes="False" -s flow_rate_extrusion_offset_factor="100" -s acceleration_wall_x="3000" -s skin_overlap_mm="0.02" -s small_feature_max_length="0.0" -s wall_0_extruder_nr="-1" -s material_maximum_park_duration="300" -s machine_nozzle_temp_enabled="True" -s switch_extruder_retraction_amount="16" -s skirt_brim_speed="30.0" -s wipe_retraction_extra_prime_amount="0" -s ironing_only_highest_layer="False" -s acceleration_topbottom="3000" -s machine_settings="0" -s adhesion_extruder_nr="0" -s mold_width="5" -s jerk_support_infill="20" -s wall_overhang_speed_factor="100" -s jerk_prime_tower="20" -s skin_outline_count="1" -s bridge_skin_speed_2="15.0" -s machine_max_feedrate_y="299792458000" -s support_roof_material_flow="100" -s bridge_skin_density_2="75" -s support_tower_diameter="3.0" -s material_linear_advance_factor_support="0" -s command_line_settings="0" -s brim_replaces_support="True" -s prime_tower_wipe_enabled="True" -s fill_perimeter_gaps="everywhere" -s skin_overlap="5" -s print_sequence="all_at_once" -s acceleration_support_infill="3000" -s brim_gap="0" -s spaghetti_infill_extra_volume="0" -s support_connect_zigzags="True" -s adaptive_layer_height_enabled="False" -s travel_compensate_overlapping_walls_enabled="True" -s roofing_pattern="lines" -s fill_outline_gaps="False" -s support_zag_skip_count="8" -s machine_filament_park_distance="16" -s acceleration_print="3000" -s material_linear_advance_factor_wall_x="0" -s material_final_print_temperature="195" -s ooze_shield_angle="60" -s machine_endstop_positive_direction_x="False" -s travel_compensate_overlapping_walls_x_enabled="True" -s coasting_volume="0.064" -s machine_endstop_positive_direction_z="True" -s small_feature_speed_factor_0="50" -s machine_shape="rectangular" -s machine_heated_bed="True" -s machine_use_extruder_offset_to_offset_coords="True" -s brim_outside_only="True" -s material_standby_temperature="150" -s support_bottom_stair_step_height="0.3" -s speed_roofing="30.0" -s roofing_line_width="0.4" -s material_print_temp_prepend="True" -s wireframe_printspeed_down="5" -s minimum_interface_area="1.0" -s draft_shield_enabled="False" -s speed_support="60" -s adhesion_z_offset="0" -s wireframe_roof_outer_delay="0.2" -s ironing_inset="0.2" -s bridge_fan_speed_3="0" -s initial_layer_line_width_factor="100.0" -s machine_start_gcode="" -s experimental="0" -s bridge_wall_min_length="5" -s prime_tower_position_x="195.6" -s wipe_retraction_amount="6.5" -s material_break_temperature="50" -s top_bottom_extruder_nr="-1" -s acceleration_support_roof="3000" -s support_roof_offset="0.0" -s wall_0_material_flow="100" -s wireframe_flow_flat="100" -s speed_print_layer_0="30.0" -s default_material_bed_temperature="60" -s raft_jerk="20" -s machine_end_gcode="" -s machine_center_is_zero="False" -s support_conical_enabled="False" -s material_anti_ooze_retraction_speed="5" -s machine_head_with_fans_polygon="[[-20, 10], [10, 10], [10, -10], [10, -10]]" -s z_seam_corner="z_seam_corner_inner" -s support_interface_angles="[ ]" -s bottom_thickness="0.8" -s raft_interface_line_spacing="1.0" -s material_flush_purge_length="60" -s machine_nozzle_heat_up_speed="2.0" -s cool_fan_speed_min="100.0" -s wipe_move_distance="20" -s bridge_skin_speed_3="15.0" -s magic_fuzzy_skin_point_dist="0.8" -s filter_out_tiny_gaps="True" -s spaghetti_flow="20" -s machine_heated_build_volume="False" -s extruder_prime_pos_abs="False" -s material_adhesion_tendency="10" -s infill_sparse_thickness="0.1" -s speed_wall_0="30.0" -s machine_extruders_share_heater="False" -s cool_lift_head="False" -s zig_zaggify_infill="False" -s acceleration_enabled="False" -s support_roof_extruder_nr="0" -s layer_start_x="0.0" -s machine_min_cool_heat_time_window="50.0" -s multiple_mesh_overlap="0.15" -s wipe_retraction_retract_speed="25" -s support_bottom_pattern="concentric" -s material_break_preparation_speed="2" -s acceleration_support_bottom="3000" -s material_end_of_filament_purge_length="20" -s wireframe_roof_drag_along="0.8" -s support_bottom_line_distance="0.4" -s wall_min_flow="0" -s ironing_flow="10.0" -s acceleration_prime_tower="3000" -s retraction_hop_after_extruder_switch_height="1" -s skirt_gap="3" -s speed_ironing="20.0" -s machine_max_acceleration_e="10000" -s line_width="0.4" -s zig_zaggify_support="False" -s wipe_hop_enable="False" -s optimize_wall_printing_order="False" -s raft_interface_line_width="0.8" -s gantry_height="180" -s material_surface_energy="100" -s print_bed_temperature="64" -s magic_mesh_surface_mode="normal" -s raft_fan_speed="0" -s wireframe_up_half_speed="0.3" -s machine_max_feedrate_e="299792458000" -s spaghetti_infill_stepped="True" -s raft_surface_fan_speed="0" -s meshfix_union_all_remove_holes="False" -s speed_wall_x="60.0" -s raft_base_jerk="20" -s machine_extruder_count="1" -s jerk_support_roof="20" -s wireframe_top_delay="0" -s machine_endstop_positive_direction_y="False" -s jerk_topbottom="20" -s remove_empty_first_layers="True" -s support_bottom_height="1" -s raft_acceleration="3000" -s jerk_print_layer_0="20" -s wireframe_roof_inset="3" -s material_anti_ooze_retracted_position="-4" -s expand_skins_expand_distance="0.8" -s bridge_wall_speed="15.0" -s support_bottom_offset="0.0" -s wireframe_flat_delay="0.1" -s machine_nozzle_expansion_angle="45" -s brim_line_count="20" -s support_roof_line_distance="0.4" -s prime_tower_line_width="0.4" -s infill_line_width="0.4" -s magic_fuzzy_skin_outside_only="False" -s speed_equalize_flow_max="150" -s jerk_roofing="20" -s raft_base_line_width="0.8" -s coasting_enable="False" -s support_interface_line_width="0.4" -s support_bottom_angles="[ ]" -s support_skip_zag_per_mm="20" -s support_extruder_nr_layer_0="0" -s meshfix_maximum_travel_resolution="0.8" -s cool_min_speed="10" -s machine_disallowed_areas="[]" -s support_interface_enable="False" -s bridge_skin_density_3="80" -s machine_max_feedrate_z="299792458000" -s support_roof_density="100" -s spaghetti_max_height="2.0" -s skirt_line_count="4" -s retraction_count_max="90" -s retraction_extrusion_window="6.5" -s support_fan_enable="False" -s support_roof_pattern="concentric" -s support_mesh="False" -s wireframe_straight_before_down="20" -s material_print_temperature="210" -s retraction_extra_prime_amount="0" -s wireframe_printspeed="5" -s machine_steps_per_mm_y="50" -s support_tree_branch_diameter="2" -s speed_slowdown_layers="2" -s default_material_print_temperature="210" -s roofing_layer_count="0" -s relative_extrusion="False" -s wall_0_inset="0" -s brim_width="8.0" -s speed_support_infill="60" -s raft_base_line_spacing="1.6" -s max_extrusion_before_wipe="10" -s ironing_pattern="zigzag" -s speed_travel="120" -s support_angle="70" -s raft_base_speed="22.5" -s layer_0_z_overlap="0.15" -s speed_z_hop="10" -s platform_adhesion="0" -s support_bottom_stair_step_width="5.0" -s raft_interface_jerk="20" -s material_shrinkage_percentage="0" -s ironing_line_spacing="0.1" -s skin_line_width="0.4" -s connect_infill_polygons="False" -s wireframe_bottom_delay="0" -s mesh_position_y="0" -s infill_randomize_start_location="False" -s machine_nozzle_head_distance="3" -s support_brim_width="8.0" -s top_layers="8" -s support_infill_sparse_thickness="0.1" -s material_bed_temperature_layer_0="64" -s clean_between_layers="False" -s travel="0" -s material_bed_temp_wait="True" -s raft_airgap="0.3" -s material_flush_purge_speed="0.5" -s support_enable="False" -s prime_tower_enable="False" -s raft_surface_thickness="0.1" -s jerk_skirt_brim="20" -s machine_heat_zone_length="16" -s gradual_infill_step_height="1.5" -s outer_inset_first="False" -s prime_tower_brim_enable="False" -s top_skin_preshrink="0.8" -s top_skin_expand_distance="0.8" -s jerk_print="20" -s mold_roof_height="0.5" -s jerk_ironing="20" -s roofing_angles="[ ]" -s support_top_distance="0.1" -s retraction_hop_after_extruder_switch="True" -s material_linear_advance_factor_skirt_brim="0" -s layer_height_0="0.3" -s switch_extruder_retraction_speeds="20" -s machine_firmware_retract="False" -s meshfix_union_all="True" -s support_z_distance="0.1" -s bridge_settings_enabled="False" -s z_seam_y="200" -s acceleration_layer_0="3000" -s raft_interface_thickness="0.15000000000000002" -s wall_line_count="2" -s magic_fuzzy_skin_point_density="1.25" -s top_bottom_thickness="0.8" -s machine_width="200" -s prime_tower_flow="100" -s acceleration_ironing="3000" -s raft_base_fan_speed="0" -s support_tree_collision_resolution="0.2" -s skin_no_small_gaps_heuristic="False" -s wipe_hop_amount="1" -s support_join_distance="2.0" -s machine_buildplate_type="glass" -s time="14:21:10" -s infill_material_flow="100" -s wireframe_enabled="False" -s material_linear_advance_factor_topbottom="0" -s wipe_retraction_prime_speed="25" -s wipe_pause="0" -s bridge_skin_support_threshold="50" -e0 -s switch_extruder_retraction_speeds="20" -s support_interface_density="100" -s cool_fan_speed="80" -s raft_base_thickness="0.36" -s machine_nozzle_offset_x="0" -s initial_layer_line_width_factor="100.0" -s bridge_skin_material_flow="60" -s material_end_of_filament_purge_speed="0.5" -s retraction_retract_speed="65" -s speed_layer_0="12" -s infill="0" -s small_feature_speed_factor="50" -s support_infill_sparse_thickness="0.1" -s speed_prime_tower="60" -s support_brim_enable="False" -s infill_multiplier="1" -s gradual_support_infill_steps="0" -s infill_sparse_density="20" -s bottom_skin_expand_distance="1.6" -s machine_nozzle_cool_down_speed="2.0" -s infill_offset_x="0" -s limit_support_retractions="True" -s machine_extruder_end_pos_x="0" -s infill_offset_y="0" -s acceleration_print_layer_0="3000" -s wall_min_flow_retract="False" -s speed_support_roof="40.0" -s xy_offset_layer_0="0" -s z_seam_position="back" -s material_guid="0ff92885-617b-4144-a03c-9989872454bc" -s material_linear_advance_factor_support_interface="0" -s material_linear_advance_factor_infill="0" -s material_break_preparation_speed="2" -s acceleration_support_bottom="3000" -s material_end_of_filament_purge_length="20" -s gradual_support_infill_step_height="1" -s support_conical_angle="30" -s raft_surface_acceleration="3000" -s support_roof_pattern="concentric" -s jerk_layer_0="20" -s support_pattern="lines" -s jerk_infill="20" -s speed_equalize_flow_enabled="False" -s top_thickness="0.8" -s bottom_skin_preshrink="1.6" -s raft_surface_line_spacing="0.4" -s skin_edge_support_layers="0" -s wall_line_width="0.4" -s xy_offset="0" -s travel_avoid_other_parts="True" -s raft_interface_speed="22.5" -s travel_avoid_distance="0.625" -s support_interface_height="1" -s wipe_move_distance="20" -s cool_fan_speed_min="80" -s acceleration_skirt_brim="3000" -s meshfix="0" -s support_bottom_material_flow="100" -s acceleration_wall="3000" -s ironing_enabled="False" -s acceleration_travel="5000" -s support_supported_skin_fan_speed="100" -s infill_wall_line_count="0" -s support_wall_count="0" -s skin_edge_support_thickness="0" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s experimental="0" -s support_skip_some_zags="False" -s travel_compensate_overlapping_walls_0_enabled="True" -s support_bottom_line_width="0.4" -s material_flow="100" -s support_offset="0" -s raft_smoothing="5" -s speed_topbottom="30.0" -s wipe_hop_enable="False" -s zig_zaggify_support="False" -s speed_print="60" -s prime_tower_min_volume="6" -s jerk_travel="30" -s material_linear_advance_factor_skirt_brim="0" -s support_tree_branch_diameter="2" -s machine_steps_per_mm_y="50" -s acceleration_support_interface="3000" -s spaghetti_max_infill_angle="10" -s bridge_wall_material_flow="50" -s wipe_hop_speed="10" -s jerk_wall_0="20" -s retraction_hop="1" -s wipe_pause="0" -s wipe_retraction_prime_speed="65" -s minimum_support_area="0.0" -s material_linear_advance_factor_wall_0="0" -s wall_0_wipe_dist="0.2" -s switch_extruder_extra_prime_amount="0" -s support_tower_maximum_supported_diameter="3.0" -s spaghetti_infill_extra_volume="0" -s support_connect_zigzags="True" -s support_xy_distance_overhang="0.2" -s bridge_skin_density_3="80" -s support_interface_enable="False" -s resolution="0" -s support_line_width="0.4" -s material_break_preparation_retracted_position="-16" -s support_xy_overrides_z="z_overrides_xy" -s min_infill_area="0" -s machine_nozzle_tip_outer_diameter="1" -s machine_steps_per_mm_x="50" -s infill_angles="[ ]" -s minimum_interface_area="1.0" -s skirt_brim_line_width="0.4" -s top_bottom_pattern="lines" -s cool_fan_full_layer="2" -s center_object="False" -s spaghetti_inset="0.2" -s gradual_infill_steps="0" -s jerk_travel_layer_0="30.0" -s mold_enabled="False" -s raft_surface_line_width="0.4" -s cooling="0" -s support_tree_collision_resolution="0.2" -s raft_base_fan_speed="0" -s material_print_temperature_layer_0="220" -s raft_interface_line_spacing="1.0" -s machine_nozzle_heat_up_speed="2.0" -s material_flush_purge_length="60" -s bridge_skin_material_flow_2="100" -s speed_support_interface="40.0" -s support_interface_offset="0.0" -s jerk_support="20" -s wall_line_width_x="0.4" -s support_line_distance="2.6666666666666665" -s retraction_enable="True" -s switch_extruder_retraction_speed="20" -s retraction_hop_enabled="False" -s acceleration_roofing="3000" -s cool_min_layer_time_fan_speed_max="10" -s wipe_retraction_speed="65" -s retraction_amount="2.5" -s raft_speed="30.0" -s mold_angle="40" -s material_flow_layer_0="100" -s wall_material_flow="100" -s bridge_skin_material_flow_3="110" -s bridge_fan_speed_2="0" -s initial_bottom_layers="6" -s support_interface_pattern="concentric" -s connect_skin_polygons="False" -s infill_pattern="concentric" -s material_flow_dependent_temperature="False" -s bottom_layers="6" -s magic_fuzzy_skin_thickness="0.3" -s meshfix_extensive_stitching="False" -s infill_wipe_dist="0.1" -s machine_extruder_start_pos_abs="False" -s skirt_brim_material_flow="100" -s bridge_skin_speed="15.0" -s jerk_wall_x="20" -s wipe_retraction_amount="2.5" -s material_break_temperature="50" -s support_roof_height="1.2" -s magic_fuzzy_skin_enabled="False" -s connect_infill_polygons="False" -s machine_extruder_start_code="" -s support_material_flow="100" -s bridge_fan_speed="100" -s bridge_sparse_infill_max_density="0" -s wall_thickness="0.8" -s support_bottom_distance="0" -s material_crystallinity="False" -s machine_steps_per_mm_e="1600" -s jerk_wall="20" -s dual="0" -s support_bottom_enable="False" -s skin_overlap="5" -s speed_infill="60" -s machine_nozzle_id="unknown" -s wipe_brush_pos_x="100" -s acceleration_travel_layer_0="5000.0" -s raft_surface_layers="2" -s skirt_brim_minimal_length="250" -s material_linear_advance_factor="0" -s cool_min_layer_time="5" -s wipe_retraction_enable="True" -s travel_avoid_supports="False" -s acceleration_infill="3000" -s speed_ironing="20.0" -s support_roof_line_width="0.4" -s extruder_prime_pos_y="0" -s material_linear_advance_factor_prime_tower="0" -s retraction_prime_speed="65" -s z_seam_type="random" -s prime_blob_enable="False" -s meshfix_keep_open_polygons="False" -s raft_surface_speed="30.0" -s infill_enable_travel_optimization="False" -s machine_nozzle_temp_enabled="True" -s switch_extruder_retraction_amount="16" -s skirt_brim_speed="12" -s material_maximum_park_duration="300" -s infill_material_flow="100" -s support_use_towers="True" -s infill_support_enabled="False" -s cool_fan_speed_0="0" -s support_brim_line_count="20" -s blackmagic="0" -s multiple_mesh_overlap="0.15" -s wipe_retraction_retract_speed="65" -s material_linear_advance_factor_wall_x="0" -s acceleration_print="3000" -s support_bottom_pattern="concentric" -s meshfix_maximum_deviation="0.05" -s cool_fan_enabled="True" -s wall_overhang_angle="90" -s cool_fan_speed_max="80" -s machine_extruder_end_code="" -s support_roof_angles="[ ]" -s retraction_hop_after_extruder_switch_height="1" -s machine_extruder_end_pos_abs="False" -s support="0" -s spaghetti_infill_enabled="False" -s acceleration_support="3000" -s acceleration_wall_0="3000" -s jerk_support_bottom="20" -s material_extrusion_cool_down_speed="0.7" -s speed_support_bottom="40.0" -s support_conical_min_width="5.0" -s coasting_min_volume="0.8" -s material_linear_advance_factor_wall="0" -s cool_fan_full_at_height="0.3" -s support_infill_angles="[ ]" -s shell="0" -s support_tower_diameter="3.0" -s machine_extruder_start_pos_x="0" -s wipe_hop_amount="1" -s support_join_distance="2.0" -s support_tree_angle="40" -s fill_perimeter_gaps="everywhere" -s prime_tower_wipe_enabled="True" -s machine_heat_zone_length="16" -s jerk_skirt_brim="20" -s raft_jerk="20" -s speed_print_layer_0="12" -s command_line_settings="0" -s material_linear_advance_factor_support="0" -s conical_overhang_angle="50" -s infill_overlap_mm="0" -s mesh_position_z="0" -s speed="0" -s material_diameter="1.75" -s meshfix_union_all_remove_holes="False" -s gradual_infill_step_height="1.5" -s cool_lift_head="False" -s speed_wall_0="30.0" -s outer_inset_first="False" -s extruder_prime_pos_z="0" -s support_tower_roof_angle="65" -s meshfix_maximum_resolution="0.5" -s wipe_repeat_count="5" -s support_tree_branch_distance="1" -s wall_x_material_flow="100" -s min_skin_width_for_expansion="3.67394039744206e-17" -s material_no_load_move_factor="0.940860215" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s max_skin_angle_for_expansion="90" -s top_bottom_pattern_0="lines" -s alternate_extra_perimeter="False" -s support_roof_enable="True" -s slicing_tolerance="exclusive" -s machine_extruder_end_pos_y="0" -s cross_support_density_image="" -s z_seam_relative="False" -s support_xy_distance="0.7" -s speed_wall="30.0" -s material_final_print_temperature="205" -s machine_endstop_positive_direction_x="False" -s bridge_enable_more_layers="True" -s conical_overhang_enabled="False" -s speed_travel_layer_0="30.0" -s fill_outline_gaps="False" -s machine_filament_park_distance="16" -s support_zag_skip_count="8" -s material_break_retracted_position="-50" -s material_initial_print_temperature="210" -s switch_extruder_prime_speed="20" -s extruder_prime_pos_x="0" -s layer_start_y="0.0" -s filter_out_tiny_gaps="True" -s bridge_skin_speed_3="15.0" -s spaghetti_flow="20" -s magic_fuzzy_skin_point_dist="0.8" -s coasting_speed="90" -s skin_material_flow="100" -s support_bottom_density="100" -s acceleration_wall_x="3000" -s skin_overlap_mm="0.02" -s small_feature_max_length="0.0" -s support_initial_layer_line_distance="2.6666666666666665" -s support_bottom_offset="0.0" -s bridge_wall_speed="15.0" -s meshfix_union_all="True" -s support_z_distance="0.1" -s infill_line_distance="2.0" -s minimum_bottom_area="1.0" -s retraction_combing_max_distance="0" -s z_seam_x="100.0" -s expand_skins_expand_distance="1.6" -s mesh_position_x="0" -s wipe_retraction_extra_prime_amount="0" -s jerk_support_roof="20" -s machine_endstop_positive_direction_y="False" -s coasting_volume="0.064" -s machine_endstop_positive_direction_z="True" -s small_feature_speed_factor_0="50" -s infill_support_angle="40" -s raft_surface_jerk="20" -s support_interface_skip_height="0.3" -s mold_width="5" -s infill_before_walls="True" -s material="0" -s jerk_support_infill="20" -s wall_overhang_speed_factor="100" -s jerk_prime_tower="20" -s skin_outline_count="1" -s material_anti_ooze_retraction_speed="5" -s support_conical_enabled="False" -s bridge_skin_speed_2="15.0" -s retract_at_layer_change="False" -s raft_base_jerk="20" -s speed_wall_x="60.0" -s support_roof_material_flow="100" -s bridge_skin_density_2="75" -s brim_replaces_support="True" -s acceleration_support_infill="3000" -s brim_gap="0" -s travel_compensate_overlapping_walls_enabled="True" -s roofing_pattern="lines" -s travel_compensate_overlapping_walls_x_enabled="True" -s wall_line_width_0="0.4" -s cross_infill_pocket_size="2.0" -s raft_margin="15" -s support_bottom_stair_step_height="0.3" -s brim_outside_only="True" -s material_standby_temperature="175" -s speed_roofing="30.0" -s roofing_line_width="0.4" -s speed_support="60" -s ironing_inset="0.2" -s bridge_fan_speed_3="0" -s support_tree_branch_diameter_angle="5" -s support_infill_rate="15" -s infill_randomize_start_location="False" -s mesh_position_y="0" -s wall_line_count="4" -s magic_fuzzy_skin_point_density="1.25" -s platform_adhesion="0" -s support_bottom_stair_step_width="5.0" -s speed_z_hop="10" -s retraction_speed="65" -s wall_0_material_flow="100" -s cool_min_speed="10" -s bridge_skin_density="100" -s raft_base_line_width="0.8" -s machine_nozzle_offset_y="0" -s extruder_nr="0" -s infill_overlap="14" -s support_interface_material_flow="100" -s magic_mesh_surface_mode="normal" -s raft_fan_speed="0" -s raft_interface_line_width="0.8" -s material_surface_energy="100" -s retraction_extrusion_window="2.5" -s support_fan_enable="False" -s machine_extruder_start_pos_y="0" -s extruder_prime_pos_abs="False" -s material_adhesion_tendency="0" -s infill_sparse_thickness="0.1" -s skin_no_small_gaps_heuristic="False" -s machine_nozzle_head_distance="3" -s support_brim_width="8.0" -s top_layers="6" -s material_break_preparation_temperature="220" -s layer_start_x="0.0" -s machine_min_cool_heat_time_window="50.0" -s support_bottom_line_distance="0.4" -s zig_zaggify_infill="False" -s wall_min_flow="0" -s ironing_flow="10.0" -s support_roof_offset="0.0" -s acceleration_support_roof="3000" -s acceleration_prime_tower="3000" -s skirt_gap="3" -s line_width="0.4" -s optimize_wall_printing_order="False" -s raft_acceleration="3000" -s support_bottom_height="1" -s raft_base_acceleration="3000" -s skirt_line_count="4" -s retraction_count_max="90" -s ironing_only_highest_layer="False" -s acceleration_topbottom="3000" -s machine_settings="0" -s small_hole_max_size="0" -s brim_line_count="20" -s support_roof_line_distance="0.4" -s infill_line_width="0.4" -s magic_fuzzy_skin_outside_only="False" -s prime_tower_line_width="0.4" -s jerk_print_layer_0="20" -s material_anti_ooze_retracted_position="-4" -s support_interface_angles="[ ]" -s bottom_thickness="0.8" -s speed_equalize_flow_max="150" -s jerk_roofing="20" -s minimum_roof_area="1.0" -s machine_extruder_cooling_fan_number="0" -s machine_nozzle_size="0.4" -s raft_interface_jerk="20" -s material_shrinkage_percentage="0" -s support_roof_density="100" -s spaghetti_max_height="2.0" -s bridge_skin_support_threshold="50" -s material_linear_advance_factor_topbottom="0" -s material_print_temperature="220" -s retraction_extra_prime_amount="0" -s default_material_print_temperature="200" -s roofing_layer_count="0" -s wall_0_inset="0" -s brim_width="8.0" -s speed_support_infill="60" -s raft_base_line_spacing="1.6" -s max_extrusion_before_wipe="10" -s roofing_material_flow="100" -s prime_tower_flow="100" -s acceleration_ironing="3000" -s raft_interface_acceleration="3000" -s spaghetti_infill_stepped="True" -s raft_surface_fan_speed="0" -s jerk_print="20" -s z_seam_y="200" -s retraction_min_travel="0.8" -s acceleration_layer_0="3000" -s material_break_speed="25" -s ironing_line_spacing="0.1" -s raft_airgap="0.3" -s material_flush_purge_speed="0.5" -s skin_line_width="0.4" -s machine_steps_per_mm_z="50" -s skin_angles="[ ]" -s skin_preshrink="1.6" -s clean_between_layers="False" -s travel="0" -s raft_surface_thickness="0.1" -s top_skin_preshrink="1.6" -s jerk_support_interface="20" -s cross_infill_density_image="" -s support_interface_line_width="0.4" -s support_skip_zag_per_mm="20" -s support_bottom_angles="[ ]" -s ironing_pattern="zigzag" -s speed_travel="150" -s support_angle="70" -s raft_base_speed="22.5" -s layer_0_z_overlap="0.15" -s top_skin_expand_distance="1.6" -s sub_div_rad_add="0.4" -s z_seam_corner="z_seam_corner_inner" -s roofing_angles="[ ]" -s jerk_ironing="20" -s top_bottom_thickness="0.8" -s support_top_distance="0.1" -s retraction_hop_after_extruder_switch="True" -s jerk_topbottom="20" -s bridge_wall_coast="100" -s raft_interface_fan_speed="0" -s raft_interface_thickness="0.15000000000000002" -s meshfix_maximum_travel_resolution="0.8" -s machine_feeder_wheel_diameter="10.0" -s retraction_hop_only_when_collides="False" -s coasting_enable="False" -s mold_roof_height="0.5" -g -e0 -l "0" -s extruder_nr="0"
2020-03-01 14:21:11,463 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 18 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,465 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 19 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,468 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 20 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,470 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 21 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,472 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 22 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,475 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 23 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,478 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 24 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,480 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 25 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,482 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 26 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,484 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 27 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,487 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 28 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,489 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 29 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,491 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 30 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,494 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 31 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,496 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 32 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,498 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 33 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,500 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 34 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,503 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 35 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,505 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 36 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,507 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 37 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,510 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 38 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,513 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 39 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,515 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 40 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,517 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 41 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,519 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 42 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,522 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 43 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,524 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 44 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,526 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 45 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,528 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 46 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,531 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 47 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,533 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 48 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,535 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 49 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,537 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 50 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,540 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 51 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,542 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 52 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,544 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 53 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,546 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 54 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,549 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 55 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,551 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 56 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,553 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 57 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,556 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 58 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,558 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 59 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,560 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 60 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,563 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 61 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,565 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 62 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,567 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 63 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,570 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 64 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,572 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 65 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,574 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 66 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,576 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 67 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,579 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 68 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,581 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 69 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,583 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 70 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,588 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 71 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,594 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 72 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,596 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 73 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,598 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 74 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,601 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 75 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,603 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 76 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,605 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 77 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,607 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 78 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,610 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 79 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,612 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 80 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,615 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 81 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,617 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 82 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,619 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 83 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,622 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 84 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,624 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 85 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,626 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 86 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,628 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 87 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,630 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 88 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,633 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 89 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,635 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 90 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,637 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 91 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,640 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 92 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,642 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 93 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,644 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 94 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,647 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 95 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,649 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 96 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,652 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 97 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,655 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 98 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,658 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 99 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,661 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 100 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,665 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 101 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,669 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 102 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,672 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 103 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,677 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 104 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,681 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 105 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,684 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 106 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,689 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 107 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,693 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 108 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,695 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 109 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,698 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 110 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,701 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 111 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,703 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 112 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,706 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 113 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,708 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 114 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,711 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 115 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,714 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 116 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,717 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 117 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,719 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 118 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,722 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 119 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,725 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 120 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,728 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 121 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,731 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 122 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,735 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 123 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,739 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 124 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,742 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 125 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,744 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 126 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,747 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 127 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,750 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 128 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,753 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 129 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,755 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 130 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,758 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 131 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,761 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 132 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,764 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 133 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,766 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 134 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,769 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 135 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,772 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 136 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,774 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 137 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,777 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 138 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,780 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 139 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,782 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 140 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,785 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 141 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,788 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 142 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,791 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 143 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,793 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 144 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,796 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 145 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,799 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 146 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,801 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 147 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:21:11,829 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-01 14:21:11,833 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-01 14:21:11,836 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [663]: Slicing took 1.2706289291381836 seconds
2020-03-01 14:21:11,837 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [664]: Number of models per buildplate: {0: 1}
2020-03-01 14:21:11,837 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [678]: See if there is more to slice...
2020-03-01 14:21:11,904 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [181]: Socket state changed to Closing
2020-03-01 14:21:11,908 - DEBUG - [MainThread] UM.Backend.Backend._onSocketError [203]: Socket debug: Arcus Error (13): Closing socket because other side requested close.
2020-03-01 14:21:11,910 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [183]: Socket state changed to Closed
2020-03-01 14:21:11,910 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onBackendQuit [829]: Backend quit with return code 0. Resetting process and socket.
2020-03-01 14:21:17,959 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-03-01 14:21:37,938 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-01 14:21:37,941 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-01 14:21:39,484 - WARNING - [MainThread] cura.UI.PrintInformation.setBaseName [360]: Unsupported Mime Type Database file extension 
2020-03-01 14:21:44,512 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/plugins/plugins/Tools/RotateTool/RotateTool.qml:70:18: Unable to assign [undefined] to bool
2020-03-01 14:21:55,128 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: GroupedOp.(#=1) <UM.Operations.RemoveSceneNodeOperation.RemoveSceneNodeOperation object at 0x600018376398>, took 4ms
2020-03-01 14:21:55,916 - WARNING - [MainThread] cura.UI.PrintInformation.setBaseName [360]: Unsupported Mime Type Database file extension 
2020-03-01 14:21:58,328 - INFO - [Thread-7] STLReader.STLReader.load_file [51]: Using NumPy-STL to load STL data.
2020-03-01 14:21:58,334 - DEBUG - [Thread-7] UM.Mesh.MeshData.calculateNormalsFromVertices [495]: Calculating normals took 0.00038313865661621094 seconds
2020-03-01 14:21:58,335 - DEBUG - [Thread-7] STLReader.STLReader._read [102]: Loaded a mesh with 16938 vertices
2020-03-01 14:21:58,345 - DEBUG - [Thread-7] UM.Mesh.MeshData.approximateConvexHull [452]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.006004810333251953 seconds. 133 input vertices. 133 output vertices.
2020-03-01 14:21:58,352 - DEBUG - [Thread-7] UM.FileHandler.ReadFileJob.run [71]: Loading file took 0.0 seconds
2020-03-01 14:21:58,362 - DEBUG - [Thread-7] UM.Mesh.MeshData.approximateConvexHull [452]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.0064220428466796875 seconds. 134 input vertices. 134 output vertices.
2020-03-01 14:21:58,407 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: <UM.Operations.AddSceneNodeOperation.AddSceneNodeOperation object at 0x600018359018>, took 22ms
2020-03-01 14:22:01,686 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._terminate [292]: Attempting to kill the engine process
2020-03-01 14:22:01,692 - DEBUG - [MainThread] UM.Backend.Backend._createSocket [213]: Previous socket existed. Closing that first.
2020-03-01 14:22:01,701 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [173]: Socket state changed to Listening
2020-03-01 14:22:01,750 - INFO - [MainThread] UM.Backend.Backend.startEngine [81]: Started engine process: /Applications/Ultimaker Cura 3.app/Contents/MacOS/CuraEngine
2020-03-01 14:22:01,753 - DEBUG - [MainThread] UM.Backend.Backend._backendLog [101]: [Backend] Calling engine with: ['/Applications/Ultimaker Cura 3.app/Contents/MacOS/CuraEngine', 'connect', '127.0.0.1:49674', '']
2020-03-01 14:22:01,757 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-03-01 14:22:01,763 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [177]: Socket state changed to Connected
2020-03-01 14:22:01,763 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] Cura_SteamEngine version 4.5.0
2020-03-01 14:22:01,766 - DEBUG - [MainThread] UM.Backend.Backend._onSocketStateChanged [167]: Backend connected on port 49674
2020-03-01 14:22:01,768 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] Copyright (C) 2019 Ultimaker
2020-03-01 14:22:01,773 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-03-01 14:22:01,778 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] This program is free software: you can redistribute it and/or modify
2020-03-01 14:22:01,782 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] it under the terms of the GNU Affero General Public License as published by
2020-03-01 14:22:01,785 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] the Free Software Foundation, either version 3 of the License, or
2020-03-01 14:22:01,788 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] (at your option) any later version.
2020-03-01 14:22:01,792 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-03-01 14:22:01,796 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] This program is distributed in the hope that it will be useful,
2020-03-01 14:22:01,800 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] but WITHOUT ANY WARRANTY; without even the implied warranty of
2020-03-01 14:22:01,804 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
2020-03-01 14:22:01,809 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'screw_box_top_M3.stl'>,rot.=Q<-0.0,-0.0,-0.13052619222005157,w=0.9914448613738104>), took 15ms
2020-03-01 14:22:01,809 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] GNU Affero General Public License for more details.
2020-03-01 14:22:01,815 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-03-01 14:22:01,821 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] You should have received a copy of the GNU Affero General Public License
2020-03-01 14:22:01,825 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] along with this program.  If not, see <http://www.gnu.org/licenses/>.
2020-03-01 14:22:01,887 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'screw_box_top_M3.stl'>,rot.=Q<-0.0,-0.0,-0.49999999999999994,w=0.8660254037844387>), took 3ms
2020-03-01 14:22:01,987 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'screw_box_top_M3.stl'>,rot.=Q<-0.0,-0.0,-0.13052619222005157,w=0.9914448613738104>), took 3ms
2020-03-01 14:22:02,007 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Darth Pooky"._octoprint._tcp.local
2020-03-01 14:22:02,008 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Blue Leader"._octoprint._tcp.local
2020-03-01 14:22:02,187 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'screw_box_top_M3.stl'>,rot.=Q<-0.0,-0.0,-0.13052619222005157,w=0.9914448613738104>), took 3ms
2020-03-01 14:22:02,287 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'screw_box_top_M3.stl'>,rot.=Q<-0.0,-0.0,-0.13052619222005157,w=0.9914448613738104>), took 3ms
2020-03-01 14:22:02,387 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'screw_box_top_M3.stl'>,rot.=Q<-0.0,-0.0,-0.13052619222005157,w=0.9914448613738104>), took 2ms
2020-03-01 14:22:02,622 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'screw_box_top_M3.stl'>,rot.=Q<-0.0,-0.0,-0.13052619222005157,w=0.9914448613738104>), took 3ms
2020-03-01 14:22:02,737 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'screw_box_top_M3.stl'>,rot.=Q<-0.0,-0.0,-0.13052619222005157,w=0.9914448613738104>), took 3ms
2020-03-01 14:22:02,837 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'screw_box_top_M3.stl'>,rot.=Q<-0.0,-0.0,-0.13052619222005157,w=0.9914448613738104>), took 3ms
2020-03-01 14:22:03,289 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'screw_box_top_M3.stl'>,rot.=Q<0.0,0.0,0.13052619222005157,w=0.9914448613738104>), took 2ms
2020-03-01 14:22:03,403 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'screw_box_top_M3.stl'>,rot.=Q<0.0,0.0,0.49999999999999994,w=0.8660254037844387>), took 3ms
2020-03-01 14:22:03,503 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'screw_box_top_M3.stl'>,rot.=Q<0.0,0.0,0.25881904510252074,w=0.9659258262890683>), took 2ms
2020-03-01 14:22:03,604 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'screw_box_top_M3.stl'>,rot.=Q<0.0,0.0,0.13052619222005157,w=0.9914448613738104>), took 3ms
2020-03-01 14:22:03,736 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'screw_box_top_M3.stl'>,rot.=Q<0.0,0.0,0.13052619222005157,w=0.9914448613738104>), took 3ms
2020-03-01 14:22:03,854 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'screw_box_top_M3.stl'>,rot.=Q<0.0,0.0,0.25881904510252074,w=0.9659258262890683>), took 2ms
2020-03-01 14:22:04,032 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: RotateOp.(node=<CuraSceneNode object: 'screw_box_top_M3.stl'>,rot.=Q<0.0,0.0,0.13052619222005157,w=0.9914448613738104>), took 2ms
2020-03-01 14:22:06,524 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-03-01 14:22:22,302 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Orange Leader"._octoprint._tcp.local
2020-03-01 14:23:51,353 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/plugins/plugins/Tools/RotateTool/RotateTool.qml:70:18: Unable to assign [undefined] to bool
2020-03-01 14:23:57,756 - INFO - [MainThread] cura.CuraApplication.reloadAll [1370]: Reloading all loaded mesh data.
2020-03-01 14:23:57,757 - INFO - [Thread-8] STLReader.STLReader.load_file [51]: Using NumPy-STL to load STL data.
2020-03-01 14:23:57,763 - DEBUG - [Thread-8] UM.Mesh.MeshData.calculateNormalsFromVertices [495]: Calculating normals took 0.0004248619079589844 seconds
2020-03-01 14:23:57,763 - DEBUG - [Thread-8] STLReader.STLReader._read [102]: Loaded a mesh with 16938 vertices
2020-03-01 14:23:57,776 - DEBUG - [Thread-8] UM.Mesh.MeshData.approximateConvexHull [452]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.0063169002532958984 seconds. 133 input vertices. 133 output vertices.
2020-03-01 14:23:57,783 - DEBUG - [Thread-8] UM.FileHandler.ReadFileJob.run [71]: Loading file took 0.0 seconds
2020-03-01 14:23:57,793 - DEBUG - [Thread-8] UM.Mesh.MeshData.approximateConvexHull [452]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.006201982498168945 seconds. 134 input vertices. 134 output vertices.
2020-03-01 14:24:06,487 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [225]: Starting to slice...
2020-03-01 14:24:06,487 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [243]: Going to slice build plate [0]!
2020-03-01 14:24:06,802 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onStartSliceCompleted [429]: Sending slice message took 0.3154590129852295 seconds
2020-03-01 14:24:06,957 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Mesh has overlapping faces!
2020-03-01 14:24:06,961 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING]  -s extruders_enabled_count="1" -s support_interface_density="100" -s cool_fan_speed="100.0" -s raft_base_thickness="0.36" -s bridge_skin_material_flow="60" -s slicing_tolerance="middle" -s material_end_of_filament_purge_speed="0.5" -s prime_tower_size="20" -s retraction_retract_speed="25" -s speed_layer_0="30.0" -s infill="0" -s small_feature_speed_factor="50" -s speed_prime_tower="60" -s support_brim_enable="False" -s infill_multiplier="1" -s gradual_support_infill_steps="0" -s initial_extruder_nr="0" -s infill_extruder_nr="-1" -s infill_sparse_density="20" -s bottom_skin_expand_distance="0.8" -s machine_nozzle_cool_down_speed="2.0" -s infill_offset_x="0" -s machine_depth="200" -s adhesion_z_offset_extensive_processing="False" -s limit_support_retractions="True" -s machine_max_acceleration_y="9000" -s infill_offset_y="0" -s acceleration_print_layer_0="3000" -s wall_min_flow_retract="False" -s speed_support_roof="40.0" -s xy_offset_layer_0="0" -s adhesion_type="skirt" -s z_seam_position="back" -s material_guid="" -s magic_spiralize="False" -s material_linear_advance_factor_support_interface="0" -s machine_max_acceleration_x="9000" -s material_linear_advance_factor_infill="0" -s print_temperature="210" -s skin_angles="[ ]" -s gradual_support_infill_step_height="1" -s support_conical_angle="30" -s raft_surface_acceleration="3000" -s jerk_layer_0="20" -s machine_max_feedrate_x="299792458000" -s support_pattern="lines" -s jerk_infill="20" -s speed_equalize_flow_enabled="False" -s top_thickness="0.8" -s bottom_skin_preshrink="0.8" -s raft_surface_line_spacing="0.4" -s wall_line_width="0.4" -s xy_offset="0" -s alternate_carve_order="True" -s travel_avoid_other_parts="True" -s raft_interface_speed="22.5" -s travel_avoid_distance="0.625" -s support_interface_height="1" -s jerk_travel_layer_0="30.0" -s date="01-03-2020" -s wireframe_flow="100" -s machine_acceleration="4000" -s machine_minimum_feedrate="0.0" -s skin_preshrink="0.8" -s jerk_wall="20" -s retract_at_layer_change="False" -s jerk_travel="30" -s support_skip_some_zags="False" -s minimum_roof_area="1.0" -s wireframe_flow_connection="100" -s bridge_skin_density="100" -s skirt_brim_line_width="0.4" -s top_bottom_pattern="lines" -s travel_compensate_overlapping_walls_0_enabled="True" -s flow_rate_max_extrusion_offset="0" -s material_diameter="2.85" -s support_bottom_line_width="0.4" -s raft_smoothing="5" -s speed_topbottom="30.0" -s wireframe_drag_along="0.6" -s material_break_speed="25" -s raft_interface_acceleration="3000" -s minimum_polygon_circumference="1.0" -s support_interface_skip_height="0.3" -s speed_print="60" -s skin_edge_support_layers="0" -s support_type="buildplate" -s support_roof_line_width="0.4" -s wireframe_printspeed_bottom="5" -s raft_surface_line_width="0.4" -s prime_tower_min_volume="6" -s prime_blob_enable="False" -s switch_extruder_prime_speed="20" -s wall_x_extruder_nr="-1" -s machine_steps_per_mm_z="50" -s smooth_spiralized_contours="True" -s ooze_shield_dist="2" -s bridge_wall_material_flow="50" -s cool_fan_full_layer="2" -s roofing_material_flow="100" -s wipe_hop_speed="10" -s infill_angles="[ ]" -s infill_line_distance="4.0" -s minimum_bottom_area="1.0" -s minimum_support_area="0.0" -s material_linear_advance_factor_wall_0="0" -s wall_0_wipe_dist="0.2" -s switch_extruder_extra_prime_amount="0" -s material_extrusion_cool_down_speed="0.7" -s wall_x_material_flow="100" -s support_xy_distance_overhang="0.2" -s wireframe_printspeed_up="5" -s resolution="0" -s retraction_hop="1" -s jerk_wall_0="20" -s skin_material_flow="100" -s support_bottom_density="100" -s jerk_support_interface="20" -s material_print_temperature_layer_0="210" -s retraction_min_travel="0.8" -s support_xy_overrides_z="z_overrides_xy" -s min_infill_area="0" -s machine_nozzle_tip_outer_diameter="1" -s machine_steps_per_mm_x="50" -s material_break_preparation_temperature="210" -s machine_nozzle_size="0.4" -s support_initial_layer_line_distance="2.6666666666666665" -s center_object="False" -s spaghetti_inset="0.2" -s mold_enabled="False" -s acceleration_travel="5000" -s acceleration_wall="3000" -s support_bottom_material_flow="100" -s ironing_enabled="False" -s cooling="0" -s support_infill_angles="[ ]" -s shell="0" -s bridge_skin_material_flow_2="100" -s speed_support_interface="40.0" -s meshfix="0" -s acceleration_skirt_brim="3000" -s support_line_distance="2.6666666666666665" -s retraction_enable="True" -s retraction_hop_enabled="False" -s switch_extruder_retraction_speed="20" -s acceleration_roofing="3000" -s anti_overhang_mesh="False" -s cool_min_layer_time_fan_speed_max="10" -s wipe_retraction_speed="25" -s retraction_amount="6.5" -s retraction_combing="all" -s material_flow_layer_0="100" -s wall_material_flow="100" -s extruder_prime_pos_z="0" -s support_tower_roof_angle="65" -s connect_skin_polygons="False" -s infill_pattern="grid" -s magic_fuzzy_skin_thickness="0.3" -s meshfix_extensive_stitching="False" -s infill_wipe_dist="0.1" -s skirt_brim_material_flow="100" -s bridge_skin_speed="15.0" -s mesh_position_x="0" -s prime_tower_position_y="175.6" -s jerk_wall_x="20" -s support_bottom_extruder_nr="0" -s support_roof_height="1.2" -s cutting_mesh="False" -s machine_max_jerk_xy="20.0" -s support_material_flow="100" -s bridge_fan_speed="100" -s support_line_width="0.4" -s ooze_shield_enabled="False" -s support_extruder_nr="0" -s wall_thickness="0.8" -s support_bottom_distance="0" -s material_crystallinity="False" -s machine_steps_per_mm_e="1600" -s dual="0" -s support_bottom_enable="False" -s wireframe_nozzle_clearance="1" -s speed_infill="60" -s machine_nozzle_id="unknown" -s wipe_brush_pos_x="100" -s acceleration_travel_layer_0="5000.0" -s meshfix_maximum_deviation="0.05" -s cool_fan_enabled="True" -s wall_overhang_angle="90" -s cool_fan_speed_max="100.0" -s raft_surface_layers="2" -s skirt_brim_minimal_length="250" -s material_linear_advance_factor="0" -s cool_min_layer_time="5" -s day="Sun" -s wipe_retraction_enable="True" -s travel_avoid_supports="False" -s acceleration_infill="3000" -s material_bed_temperature="64" -s bridge_skin_material_flow_3="110" -s bridge_fan_speed_2="0" -s initial_bottom_layers="8" -s support_interface_pattern="concentric" -s cross_infill_density_image="" -s adaptive_layer_height_variation="0.1" -s infill_wall_line_count="0" -s support_supported_skin_fan_speed="100" -s extruder_prime_pos_y="0" -s machine_name="Wanhao Duplicator i3 Plus" -s retraction_prime_speed="25" -s material_linear_advance_factor_prime_tower="0" -s z_seam_type="sharpest_corner" -s meshfix_keep_open_polygons="False" -s support_use_towers="True" -s infill_support_enabled="False" -s cool_fan_speed_0="0" -s support_brim_line_count="20" -s blackmagic="0" -s material_print_temp_wait="True" -s support_roof_angles="[ ]" -s infill_mesh_order="0" -s support="0" -s spaghetti_infill_enabled="False" -s acceleration_support="3000" -s support_interface_offset="0.0" -s support_tree_enable="False" -s acceleration_wall_0="3000" -s wireframe_top_jump="0.6" -s jerk_support_bottom="20" -s speed_support_bottom="40.0" -s support_conical_min_width="5.0" -s bottom_layers="8" -s material_flow_dependent_temperature="False" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s support_wall_count="0" -s machine_max_acceleration_z="100" -s skin_edge_support_thickness="0" -s coasting_min_volume="0.8" -s material_linear_advance_factor_wall="0" -s cool_fan_full_at_height="0.3" -s draft_shield_dist="10" -s layer_height="0.1" -s material_break_preparation_retracted_position="-16" -s infill_mesh="False" -s mold_angle="40" -s raft_speed="30.0" -s machine_max_jerk_z="0.4" -s support_tree_angle="40" -s wall_line_width_0="0.4" -s cross_infill_pocket_size="4.0" -s machine_max_jerk_e="5.0" -s raft_margin="15" -s raft_surface_speed="30.0" -s infill_enable_travel_optimization="False" -s machine_height="180" -s travel_retract_before_outer_wall="False" -s infill_support_angle="40" -s adaptive_layer_height_variation_step="0.01" -s raft_surface_jerk="20" -s bridge_sparse_infill_max_density="0" -s wireframe_printspeed_flat="5" -s draft_shield_height_limitation="full" -s magic_fuzzy_skin_enabled="False" -s jerk_enabled="False" -s support_mesh_drop_down="True" -s wireframe_roof_fall_down="2" -s wireframe_strategy="compensate" -s machine_gcode_flavor="RepRap (Marlin/Sprinter)" -s conical_overhang_angle="50" -s infill_overlap_mm="0.04" -s mesh_position_z="0" -s travel_speed="120" -s speed="0" -s small_hole_max_size="0" -s material_bed_temp_prepend="True" -s material="0" -s infill_before_walls="True" -s meshfix_maximum_resolution="0.5" -s wipe_repeat_count="5" -s support_tree_branch_distance="1" -s retraction_speed="25" -s gradual_infill_steps="0" -s machine_show_variants="False" -s support_interface_material_flow="100" -s infill_overlap="10" -s jerk_support="20" -s wall_line_width_x="0.4" -s roofing_extruder_nr="-1" -s raft_base_acceleration="3000" -s wall_extruder_nr="-1" -s adaptive_layer_height_threshold="0.2" -s min_skin_width_for_expansion="4.898587196589413e-17" -s material_no_load_move_factor="0.940860215" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s max_skin_angle_for_expansion="90" -s sub_div_rad_add="0.4" -s support_tree_branch_diameter_angle="5" -s top_bottom_pattern_0="lines" -s alternate_extra_perimeter="False" -s support_roof_enable="True" -s bridge_wall_coast="100" -s raft_interface_fan_speed="0" -s support_offset="0" -s wireframe_fall_down="0.5" -s material_flow="100" -s cross_support_density_image="" -s wireframe_height="3" -s z_seam_relative="False" -s support_tower_maximum_supported_diameter="3.0" -s support_interface_extruder_nr="0" -s nozzle_disallowed_areas="[]" -s support_xy_distance="0.7" -s speed_wall="30.0" -s bridge_enable_more_layers="True" -s conical_overhang_enabled="False" -s speed_travel_layer_0="60.0" -s draft_shield_height="10" -s z_seam_x="100.0" -s retraction_combing_max_distance="0" -s support_infill_rate="15" -s spaghetti_max_infill_angle="10" -s acceleration_support_interface="3000" -s machine_feeder_wheel_diameter="10.0" -s retraction_hop_only_when_collides="False" -s extruder_prime_pos_x="0" -s build_volume_temperature="28" -s layer_start_y="0.0" -s material_break_retracted_position="-50" -s material_initial_print_temperature="200" -s support_infill_extruder_nr="0" -s coasting_speed="90" -s carve_multiple_volumes="False" -s flow_rate_extrusion_offset_factor="100" -s acceleration_wall_x="3000" -s skin_overlap_mm="0.02" -s small_feature_max_length="0.0" -s wall_0_extruder_nr="-1" -s material_maximum_park_duration="300" -s machine_nozzle_temp_enabled="True" -s switch_extruder_retraction_amount="16" -s skirt_brim_speed="30.0" -s wipe_retraction_extra_prime_amount="0" -s ironing_only_highest_layer="False" -s acceleration_topbottom="3000" -s machine_settings="0" -s adhesion_extruder_nr="0" -s mold_width="5" -s jerk_support_infill="20" -s wall_overhang_speed_factor="100" -s jerk_prime_tower="20" -s skin_outline_count="1" -s bridge_skin_speed_2="15.0" -s machine_max_feedrate_y="299792458000" -s support_roof_material_flow="100" -s bridge_skin_density_2="75" -s support_tower_diameter="3.0" -s material_linear_advance_factor_support="0" -s command_line_settings="0" -s brim_replaces_support="True" -s prime_tower_wipe_enabled="True" -s fill_perimeter_gaps="everywhere" -s skin_overlap="5" -s print_sequence="all_at_once" -s acceleration_support_infill="3000" -s brim_gap="0" -s spaghetti_infill_extra_volume="0" -s support_connect_zigzags="True" -s adaptive_layer_height_enabled="False" -s travel_compensate_overlapping_walls_enabled="True" -s roofing_pattern="lines" -s fill_outline_gaps="False" -s support_zag_skip_count="8" -s machine_filament_park_distance="16" -s acceleration_print="3000" -s material_linear_advance_factor_wall_x="0" -s material_final_print_temperature="195" -s ooze_shield_angle="60" -s machine_endstop_positive_direction_x="False" -s travel_compensate_overlapping_walls_x_enabled="True" -s coasting_volume="0.064" -s machine_endstop_positive_direction_z="True" -s small_feature_speed_factor_0="50" -s machine_shape="rectangular" -s machine_heated_bed="True" -s machine_use_extruder_offset_to_offset_coords="True" -s brim_outside_only="True" -s material_standby_temperature="150" -s support_bottom_stair_step_height="0.3" -s speed_roofing="30.0" -s roofing_line_width="0.4" -s material_print_temp_prepend="True" -s wireframe_printspeed_down="5" -s minimum_interface_area="1.0" -s draft_shield_enabled="False" -s speed_support="60" -s adhesion_z_offset="0" -s wireframe_roof_outer_delay="0.2" -s ironing_inset="0.2" -s bridge_fan_speed_3="0" -s initial_layer_line_width_factor="100.0" -s machine_start_gcode="" -s experimental="0" -s bridge_wall_min_length="5" -s prime_tower_position_x="195.6" -s wipe_retraction_amount="6.5" -s material_break_temperature="50" -s top_bottom_extruder_nr="-1" -s acceleration_support_roof="3000" -s support_roof_offset="0.0" -s wall_0_material_flow="100" -s wireframe_flow_flat="100" -s speed_print_layer_0="30.0" -s default_material_bed_temperature="60" -s raft_jerk="20" -s machine_end_gcode="" -s machine_center_is_zero="False" -s support_conical_enabled="False" -s material_anti_ooze_retraction_speed="5" -s machine_head_with_fans_polygon="[[-20, 10], [10, 10], [10, -10], [10, -10]]" -s z_seam_corner="z_seam_corner_inner" -s support_interface_angles="[ ]" -s bottom_thickness="0.8" -s raft_interface_line_spacing="1.0" -s material_flush_purge_length="60" -s machine_nozzle_heat_up_speed="2.0" -s cool_fan_speed_min="100.0" -s wipe_move_distance="20" -s bridge_skin_speed_3="15.0" -s magic_fuzzy_skin_point_dist="0.8" -s filter_out_tiny_gaps="True" -s spaghetti_flow="20" -s machine_heated_build_volume="False" -s extruder_prime_pos_abs="False" -s material_adhesion_tendency="10" -s infill_sparse_thickness="0.1" -s speed_wall_0="30.0" -s machine_extruders_share_heater="False" -s cool_lift_head="False" -s zig_zaggify_infill="False" -s acceleration_enabled="False" -s support_roof_extruder_nr="0" -s layer_start_x="0.0" -s machine_min_cool_heat_time_window="50.0" -s multiple_mesh_overlap="0.15" -s wipe_retraction_retract_speed="25" -s support_bottom_pattern="concentric" -s material_break_preparation_speed="2" -s acceleration_support_bottom="3000" -s material_end_of_filament_purge_length="20" -s wireframe_roof_drag_along="0.8" -s support_bottom_line_distance="0.4" -s wall_min_flow="0" -s ironing_flow="10.0" -s acceleration_prime_tower="3000" -s retraction_hop_after_extruder_switch_height="1" -s skirt_gap="3" -s speed_ironing="20.0" -s machine_max_acceleration_e="10000" -s line_width="0.4" -s zig_zaggify_support="False" -s wipe_hop_enable="False" -s optimize_wall_printing_order="False" -s raft_interface_line_width="0.8" -s gantry_height="180" -s material_surface_energy="100" -s print_bed_temperature="64" -s magic_mesh_surface_mode="normal" -s raft_fan_speed="0" -s wireframe_up_half_speed="0.3" -s machine_max_feedrate_e="299792458000" -s spaghetti_infill_stepped="True" -s raft_surface_fan_speed="0" -s meshfix_union_all_remove_holes="False" -s speed_wall_x="60.0" -s raft_base_jerk="20" -s machine_extruder_count="1" -s jerk_support_roof="20" -s wireframe_top_delay="0" -s machine_endstop_positive_direction_y="False" -s jerk_topbottom="20" -s remove_empty_first_layers="True" -s support_bottom_height="1" -s raft_acceleration="3000" -s jerk_print_layer_0="20" -s wireframe_roof_inset="3" -s material_anti_ooze_retracted_position="-4" -s expand_skins_expand_distance="0.8" -s bridge_wall_speed="15.0" -s support_bottom_offset="0.0" -s wireframe_flat_delay="0.1" -s machine_nozzle_expansion_angle="45" -s brim_line_count="20" -s support_roof_line_distance="0.4" -s prime_tower_line_width="0.4" -s infill_line_width="0.4" -s magic_fuzzy_skin_outside_only="False" -s speed_equalize_flow_max="150" -s jerk_roofing="20" -s raft_base_line_width="0.8" -s coasting_enable="False" -s support_interface_line_width="0.4" -s support_bottom_angles="[ ]" -s support_skip_zag_per_mm="20" -s support_extruder_nr_layer_0="0" -s meshfix_maximum_travel_resolution="0.8" -s cool_min_speed="10" -s machine_disallowed_areas="[]" -s support_interface_enable="False" -s bridge_skin_density_3="80" -s machine_max_feedrate_z="299792458000" -s support_roof_density="100" -s spaghetti_max_height="2.0" -s skirt_line_count="4" -s retraction_count_max="90" -s retraction_extrusion_window="6.5" -s support_fan_enable="False" -s support_roof_pattern="concentric" -s support_mesh="False" -s wireframe_straight_before_down="20" -s material_print_temperature="210" -s retraction_extra_prime_amount="0" -s wireframe_printspeed="5" -s machine_steps_per_mm_y="50" -s support_tree_branch_diameter="2" -s speed_slowdown_layers="2" -s default_material_print_temperature="210" -s roofing_layer_count="0" -s relative_extrusion="False" -s wall_0_inset="0" -s brim_width="8.0" -s speed_support_infill="60" -s raft_base_line_spacing="1.6" -s max_extrusion_before_wipe="10" -s ironing_pattern="zigzag" -s speed_travel="120" -s support_angle="70" -s raft_base_speed="22.5" -s layer_0_z_overlap="0.15" -s speed_z_hop="10" -s platform_adhesion="0" -s support_bottom_stair_step_width="5.0" -s raft_interface_jerk="20" -s material_shrinkage_percentage="0" -s ironing_line_spacing="0.1" -s skin_line_width="0.4" -s connect_infill_polygons="False" -s wireframe_bottom_delay="0" -s mesh_position_y="0" -s infill_randomize_start_location="False" -s machine_nozzle_head_distance="3" -s support_brim_width="8.0" -s top_layers="8" -s support_infill_sparse_thickness="0.1" -s material_bed_temperature_layer_0="64" -s clean_between_layers="False" -s travel="0" -s material_bed_temp_wait="True" -s raft_airgap="0.3" -s material_flush_purge_speed="0.5" -s support_enable="False" -s prime_tower_enable="False" -s raft_surface_thickness="0.1" -s jerk_skirt_brim="20" -s machine_heat_zone_length="16" -s gradual_infill_step_height="1.5" -s outer_inset_first="False" -s prime_tower_brim_enable="False" -s top_skin_preshrink="0.8" -s top_skin_expand_distance="0.8" -s jerk_print="20" -s mold_roof_height="0.5" -s jerk_ironing="20" -s roofing_angles="[ ]" -s support_top_distance="0.1" -s retraction_hop_after_extruder_switch="True" -s material_linear_advance_factor_skirt_brim="0" -s layer_height_0="0.3" -s switch_extruder_retraction_speeds="20" -s machine_firmware_retract="False" -s meshfix_union_all="True" -s support_z_distance="0.1" -s bridge_settings_enabled="False" -s z_seam_y="200" -s acceleration_layer_0="3000" -s raft_interface_thickness="0.15000000000000002" -s wall_line_count="2" -s magic_fuzzy_skin_point_density="1.25" -s top_bottom_thickness="0.8" -s machine_width="200" -s prime_tower_flow="100" -s acceleration_ironing="3000" -s raft_base_fan_speed="0" -s support_tree_collision_resolution="0.2" -s skin_no_small_gaps_heuristic="False" -s wipe_hop_amount="1" -s support_join_distance="2.0" -s machine_buildplate_type="glass" -s time="14:24:06" -s infill_material_flow="100" -s wireframe_enabled="False" -s material_linear_advance_factor_topbottom="0" -s wipe_retraction_prime_speed="25" -s wipe_pause="0" -s bridge_skin_support_threshold="50" -e0 -s switch_extruder_retraction_speeds="20" -s support_interface_density="100" -s cool_fan_speed="80" -s raft_base_thickness="0.36" -s machine_nozzle_offset_x="0" -s initial_layer_line_width_factor="100.0" -s bridge_skin_material_flow="60" -s material_end_of_filament_purge_speed="0.5" -s retraction_retract_speed="65" -s speed_layer_0="12" -s infill="0" -s small_feature_speed_factor="50" -s support_infill_sparse_thickness="0.1" -s speed_prime_tower="60" -s support_brim_enable="False" -s infill_multiplier="1" -s gradual_support_infill_steps="0" -s infill_sparse_density="20" -s bottom_skin_expand_distance="1.6" -s machine_nozzle_cool_down_speed="2.0" -s infill_offset_x="0" -s limit_support_retractions="True" -s machine_extruder_end_pos_x="0" -s infill_offset_y="0" -s acceleration_print_layer_0="3000" -s wall_min_flow_retract="False" -s speed_support_roof="40.0" -s xy_offset_layer_0="0" -s z_seam_position="back" -s material_guid="0ff92885-617b-4144-a03c-9989872454bc" -s material_linear_advance_factor_support_interface="0" -s material_linear_advance_factor_infill="0" -s material_break_preparation_speed="2" -s acceleration_support_bottom="3000" -s material_end_of_filament_purge_length="20" -s gradual_support_infill_step_height="1" -s support_conical_angle="30" -s raft_surface_acceleration="3000" -s support_roof_pattern="concentric" -s jerk_layer_0="20" -s support_pattern="lines" -s jerk_infill="20" -s speed_equalize_flow_enabled="False" -s top_thickness="0.8" -s bottom_skin_preshrink="1.6" -s raft_surface_line_spacing="0.4" -s skin_edge_support_layers="0" -s wall_line_width="0.4" -s xy_offset="0" -s travel_avoid_other_parts="True" -s raft_interface_speed="22.5" -s travel_avoid_distance="0.625" -s support_interface_height="1" -s wipe_move_distance="20" -s cool_fan_speed_min="80" -s acceleration_skirt_brim="3000" -s meshfix="0" -s support_bottom_material_flow="100" -s acceleration_wall="3000" -s ironing_enabled="False" -s acceleration_travel="5000" -s support_supported_skin_fan_speed="100" -s infill_wall_line_count="0" -s support_wall_count="0" -s skin_edge_support_thickness="0" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s experimental="0" -s support_skip_some_zags="False" -s travel_compensate_overlapping_walls_0_enabled="True" -s support_bottom_line_width="0.4" -s material_flow="100" -s support_offset="0" -s raft_smoothing="5" -s speed_topbottom="30.0" -s wipe_hop_enable="False" -s zig_zaggify_support="False" -s speed_print="60" -s prime_tower_min_volume="6" -s jerk_travel="30" -s material_linear_advance_factor_skirt_brim="0" -s support_tree_branch_diameter="2" -s machine_steps_per_mm_y="50" -s acceleration_support_interface="3000" -s spaghetti_max_infill_angle="10" -s bridge_wall_material_flow="50" -s wipe_hop_speed="10" -s jerk_wall_0="20" -s retraction_hop="1" -s wipe_pause="0" -s wipe_retraction_prime_speed="65" -s minimum_support_area="0.0" -s material_linear_advance_factor_wall_0="0" -s wall_0_wipe_dist="0.2" -s switch_extruder_extra_prime_amount="0" -s support_tower_maximum_supported_diameter="3.0" -s spaghetti_infill_extra_volume="0" -s support_connect_zigzags="True" -s support_xy_distance_overhang="0.2" -s bridge_skin_density_3="80" -s support_interface_enable="False" -s resolution="0" -s support_line_width="0.4" -s material_break_preparation_retracted_position="-16" -s support_xy_overrides_z="z_overrides_xy" -s min_infill_area="0" -s machine_nozzle_tip_outer_diameter="1" -s machine_steps_per_mm_x="50" -s infill_angles="[ ]" -s minimum_interface_area="1.0" -s skirt_brim_line_width="0.4" -s top_bottom_pattern="lines" -s cool_fan_full_layer="2" -s center_object="False" -s spaghetti_inset="0.2" -s gradual_infill_steps="0" -s jerk_travel_layer_0="30.0" -s mold_enabled="False" -s raft_surface_line_width="0.4" -s cooling="0" -s support_tree_collision_resolution="0.2" -s raft_base_fan_speed="0" -s material_print_temperature_layer_0="220" -s raft_interface_line_spacing="1.0" -s machine_nozzle_heat_up_speed="2.0" -s material_flush_purge_length="60" -s bridge_skin_material_flow_2="100" -s speed_support_interface="40.0" -s support_interface_offset="0.0" -s jerk_support="20" -s wall_line_width_x="0.4" -s support_line_distance="2.6666666666666665" -s retraction_enable="True" -s switch_extruder_retraction_speed="20" -s retraction_hop_enabled="False" -s acceleration_roofing="3000" -s cool_min_layer_time_fan_speed_max="10" -s wipe_retraction_speed="65" -s retraction_amount="2.5" -s raft_speed="30.0" -s mold_angle="40" -s material_flow_layer_0="100" -s wall_material_flow="100" -s bridge_skin_material_flow_3="110" -s bridge_fan_speed_2="0" -s initial_bottom_layers="6" -s support_interface_pattern="concentric" -s connect_skin_polygons="False" -s infill_pattern="concentric" -s material_flow_dependent_temperature="False" -s bottom_layers="6" -s magic_fuzzy_skin_thickness="0.3" -s meshfix_extensive_stitching="False" -s infill_wipe_dist="0.1" -s machine_extruder_start_pos_abs="False" -s skirt_brim_material_flow="100" -s bridge_skin_speed="15.0" -s jerk_wall_x="20" -s wipe_retraction_amount="2.5" -s material_break_temperature="50" -s support_roof_height="1.2" -s magic_fuzzy_skin_enabled="False" -s connect_infill_polygons="False" -s machine_extruder_start_code="" -s support_material_flow="100" -s bridge_fan_speed="100" -s bridge_sparse_infill_max_density="0" -s wall_thickness="0.8" -s support_bottom_distance="0" -s material_crystallinity="False" -s machine_steps_per_mm_e="1600" -s jerk_wall="20" -s dual="0" -s support_bottom_enable="False" -s skin_overlap="5" -s speed_infill="60" -s machine_nozzle_id="unknown" -s wipe_brush_pos_x="100" -s acceleration_travel_layer_0="5000.0" -s raft_surface_layers="2" -s skirt_brim_minimal_length="250" -s material_linear_advance_factor="0" -s cool_min_layer_time="5" -s wipe_retraction_enable="True" -s travel_avoid_supports="False" -s acceleration_infill="3000" -s speed_ironing="20.0" -s support_roof_line_width="0.4" -s extruder_prime_pos_y="0" -s material_linear_advance_factor_prime_tower="0" -s retraction_prime_speed="65" -s z_seam_type="random" -s prime_blob_enable="False" -s meshfix_keep_open_polygons="False" -s raft_surface_speed="30.0" -s infill_enable_travel_optimization="False" -s machine_nozzle_temp_enabled="True" -s switch_extruder_retraction_amount="16" -s skirt_brim_speed="12" -s material_maximum_park_duration="300" -s infill_material_flow="100" -s support_use_towers="True" -s infill_support_enabled="False" -s cool_fan_speed_0="0" -s support_brim_line_count="20" -s blackmagic="0" -s multiple_mesh_overlap="0.15" -s wipe_retraction_retract_speed="65" -s material_linear_advance_factor_wall_x="0" -s acceleration_print="3000" -s support_bottom_pattern="concentric" -s meshfix_maximum_deviation="0.05" -s cool_fan_enabled="True" -s wall_overhang_angle="90" -s cool_fan_speed_max="80" -s machine_extruder_end_code="" -s support_roof_angles="[ ]" -s retraction_hop_after_extruder_switch_height="1" -s machine_extruder_end_pos_abs="False" -s support="0" -s spaghetti_infill_enabled="False" -s acceleration_support="3000" -s acceleration_wall_0="3000" -s jerk_support_bottom="20" -s material_extrusion_cool_down_speed="0.7" -s speed_support_bottom="40.0" -s support_conical_min_width="5.0" -s coasting_min_volume="0.8" -s material_linear_advance_factor_wall="0" -s cool_fan_full_at_height="0.3" -s support_infill_angles="[ ]" -s shell="0" -s support_tower_diameter="3.0" -s machine_extruder_start_pos_x="0" -s wipe_hop_amount="1" -s support_join_distance="2.0" -s support_tree_angle="40" -s fill_perimeter_gaps="everywhere" -s prime_tower_wipe_enabled="True" -s machine_heat_zone_length="16" -s jerk_skirt_brim="20" -s raft_jerk="20" -s speed_print_layer_0="12" -s command_line_settings="0" -s material_linear_advance_factor_support="0" -s conical_overhang_angle="50" -s infill_overlap_mm="0" -s mesh_position_z="0" -s speed="0" -s material_diameter="1.75" -s meshfix_union_all_remove_holes="False" -s gradual_infill_step_height="1.5" -s cool_lift_head="False" -s speed_wall_0="30.0" -s outer_inset_first="False" -s extruder_prime_pos_z="0" -s support_tower_roof_angle="65" -s meshfix_maximum_resolution="0.5" -s wipe_repeat_count="5" -s support_tree_branch_distance="1" -s wall_x_material_flow="100" -s min_skin_width_for_expansion="3.67394039744206e-17" -s material_no_load_move_factor="0.940860215" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s max_skin_angle_for_expansion="90" -s top_bottom_pattern_0="lines" -s alternate_extra_perimeter="False" -s support_roof_enable="True" -s slicing_tolerance="exclusive" -s machine_extruder_end_pos_y="0" -s cross_support_density_image="" -s z_seam_relative="False" -s support_xy_distance="0.7" -s speed_wall="30.0" -s material_final_print_temperature="205" -s machine_endstop_positive_direction_x="False" -s bridge_enable_more_layers="True" -s conical_overhang_enabled="False" -s speed_travel_layer_0="30.0" -s fill_outline_gaps="False" -s machine_filament_park_distance="16" -s support_zag_skip_count="8" -s material_break_retracted_position="-50" -s material_initial_print_temperature="210" -s switch_extruder_prime_speed="20" -s extruder_prime_pos_x="0" -s layer_start_y="0.0" -s filter_out_tiny_gaps="True" -s bridge_skin_speed_3="15.0" -s spaghetti_flow="20" -s magic_fuzzy_skin_point_dist="0.8" -s coasting_speed="90" -s skin_material_flow="100" -s support_bottom_density="100" -s acceleration_wall_x="3000" -s skin_overlap_mm="0.02" -s small_feature_max_length="0.0" -s support_initial_layer_line_distance="2.6666666666666665" -s support_bottom_offset="0.0" -s bridge_wall_speed="15.0" -s meshfix_union_all="True" -s support_z_distance="0.1" -s infill_line_distance="2.0" -s minimum_bottom_area="1.0" -s retraction_combing_max_distance="0" -s z_seam_x="100.0" -s expand_skins_expand_distance="1.6" -s mesh_position_x="0" -s wipe_retraction_extra_prime_amount="0" -s jerk_support_roof="20" -s machine_endstop_positive_direction_y="False" -s coasting_volume="0.064" -s machine_endstop_positive_direction_z="True" -s small_feature_speed_factor_0="50" -s infill_support_angle="40" -s raft_surface_jerk="20" -s support_interface_skip_height="0.3" -s mold_width="5" -s infill_before_walls="True" -s material="0" -s jerk_support_infill="20" -s wall_overhang_speed_factor="100" -s jerk_prime_tower="20" -s skin_outline_count="1" -s material_anti_ooze_retraction_speed="5" -s support_conical_enabled="False" -s bridge_skin_speed_2="15.0" -s retract_at_layer_change="False" -s raft_base_jerk="20" -s speed_wall_x="60.0" -s support_roof_material_flow="100" -s bridge_skin_density_2="75" -s brim_replaces_support="True" -s acceleration_support_infill="3000" -s brim_gap="0" -s travel_compensate_overlapping_walls_enabled="True" -s roofing_pattern="lines" -s travel_compensate_overlapping_walls_x_enabled="True" -s wall_line_width_0="0.4" -s cross_infill_pocket_size="2.0" -s raft_margin="15" -s support_bottom_stair_step_height="0.3" -s brim_outside_only="True" -s material_standby_temperature="175" -s speed_roofing="30.0" -s roofing_line_width="0.4" -s speed_support="60" -s ironing_inset="0.2" -s bridge_fan_speed_3="0" -s support_tree_branch_diameter_angle="5" -s support_infill_rate="15" -s infill_randomize_start_location="False" -s mesh_position_y="0" -s wall_line_count="4" -s magic_fuzzy_skin_point_density="1.25" -s platform_adhesion="0" -s support_bottom_stair_step_width="5.0" -s speed_z_hop="10" -s retraction_speed="65" -s wall_0_material_flow="100" -s cool_min_speed="10" -s bridge_skin_density="100" -s raft_base_line_width="0.8" -s machine_nozzle_offset_y="0" -s extruder_nr="0" -s infill_overlap="14" -s support_interface_material_flow="100" -s magic_mesh_surface_mode="normal" -s raft_fan_speed="0" -s raft_interface_line_width="0.8" -s material_surface_energy="100" -s retraction_extrusion_window="2.5" -s support_fan_enable="False" -s machine_extruder_start_pos_y="0" -s extruder_prime_pos_abs="False" -s material_adhesion_tendency="0" -s infill_sparse_thickness="0.1" -s skin_no_small_gaps_heuristic="False" -s machine_nozzle_head_distance="3" -s support_brim_width="8.0" -s top_layers="6" -s material_break_preparation_temperature="220" -s layer_start_x="0.0" -s machine_min_cool_heat_time_window="50.0" -s support_bottom_line_distance="0.4" -s zig_zaggify_infill="False" -s wall_min_flow="0" -s ironing_flow="10.0" -s support_roof_offset="0.0" -s acceleration_support_roof="3000" -s acceleration_prime_tower="3000" -s skirt_gap="3" -s line_width="0.4" -s optimize_wall_printing_order="False" -s raft_acceleration="3000" -s support_bottom_height="1" -s raft_base_acceleration="3000" -s skirt_line_count="4" -s retraction_count_max="90" -s ironing_only_highest_layer="False" -s acceleration_topbottom="3000" -s machine_settings="0" -s small_hole_max_size="0" -s brim_line_count="20" -s support_roof_line_distance="0.4" -s infill_line_width="0.4" -s magic_fuzzy_skin_outside_only="False" -s prime_tower_line_width="0.4" -s jerk_print_layer_0="20" -s material_anti_ooze_retracted_position="-4" -s support_interface_angles="[ ]" -s bottom_thickness="0.8" -s speed_equalize_flow_max="150" -s jerk_roofing="20" -s minimum_roof_area="1.0" -s machine_extruder_cooling_fan_number="0" -s machine_nozzle_size="0.4" -s raft_interface_jerk="20" -s material_shrinkage_percentage="0" -s support_roof_density="100" -s spaghetti_max_height="2.0" -s bridge_skin_support_threshold="50" -s material_linear_advance_factor_topbottom="0" -s material_print_temperature="220" -s retraction_extra_prime_amount="0" -s default_material_print_temperature="200" -s roofing_layer_count="0" -s wall_0_inset="0" -s brim_width="8.0" -s speed_support_infill="60" -s raft_base_line_spacing="1.6" -s max_extrusion_before_wipe="10" -s roofing_material_flow="100" -s prime_tower_flow="100" -s acceleration_ironing="3000" -s raft_interface_acceleration="3000" -s spaghetti_infill_stepped="True" -s raft_surface_fan_speed="0" -s jerk_print="20" -s z_seam_y="200" -s retraction_min_travel="0.8" -s acceleration_layer_0="3000" -s material_break_speed="25" -s ironing_line_spacing="0.1" -s raft_airgap="0.3" -s material_flush_purge_speed="0.5" -s skin_line_width="0.4" -s machine_steps_per_mm_z="50" -s skin_angles="[ ]" -s skin_preshrink="1.6" -s clean_between_layers="False" -s travel="0" -s raft_surface_thickness="0.1" -s top_skin_preshrink="1.6" -s jerk_support_interface="20" -s cross_infill_density_image="" -s support_interface_line_width="0.4" -s support_skip_zag_per_mm="20" -s support_bottom_angles="[ ]" -s ironing_pattern="zigzag" -s speed_travel="150" -s support_angle="70" -s raft_base_speed="22.5" -s layer_0_z_overlap="0.15" -s top_skin_expand_distance="1.6" -s sub_div_rad_add="0.4" -s z_seam_corner="z_seam_corner_inner" -s roofing_angles="[ ]" -s jerk_ironing="20" -s top_bottom_thickness="0.8" -s support_top_distance="0.1" -s retraction_hop_after_extruder_switch="True" -s jerk_topbottom="20" -s bridge_wall_coast="100" -s raft_interface_fan_speed="0" -s raft_interface_thickness="0.15000000000000002" -s meshfix_maximum_travel_resolution="0.8" -s machine_feeder_wheel_diameter="10.0" -s retraction_hop_only_when_collides="False" -s coasting_enable="False" -s mold_roof_height="0.5" -g -e0 -l "0" -s extruder_nr="0"
2020-03-01 14:24:07,261 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 18 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,263 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 19 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,265 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 20 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,267 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 21 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,270 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 22 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,272 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 23 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,274 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 24 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,276 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 25 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,279 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 26 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,281 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 27 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,284 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 28 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,286 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 29 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,288 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 30 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,290 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 31 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,293 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 32 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,295 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 33 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,297 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 34 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,300 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 35 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,302 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 36 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,305 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 37 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,308 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 38 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,312 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 39 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,315 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 40 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,317 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 41 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,320 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 42 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,322 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 43 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,325 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 44 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,327 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 45 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,330 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 46 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,333 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 47 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,336 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 48 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,339 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 49 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,341 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 50 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,344 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 51 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,346 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 52 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,349 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 53 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,351 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 54 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,354 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 55 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,356 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 56 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,358 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 57 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,361 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 58 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,363 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 59 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,366 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 60 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,368 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 61 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,371 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 62 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,373 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 63 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,376 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 64 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,378 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 65 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,381 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 66 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,383 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 67 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,386 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 68 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,388 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 69 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,391 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 70 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,393 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 71 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,395 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 72 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,398 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 73 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,401 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 74 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,403 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 75 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,406 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 76 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,408 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 77 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,411 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 78 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,414 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 79 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,416 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 80 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,418 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 81 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,421 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 82 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,423 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 83 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,426 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 84 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,430 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 85 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,433 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 86 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,436 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 87 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,439 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 88 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,442 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 89 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,445 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 90 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,449 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 91 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,452 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 92 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,455 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 93 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,461 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 94 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,465 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 95 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,469 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 96 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,472 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 97 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,475 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 98 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,477 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 99 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,480 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 100 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,483 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 101 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,485 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 102 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,489 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 103 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,493 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 104 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,497 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 105 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,500 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 106 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,503 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 107 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,506 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 108 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,509 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 109 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,511 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 110 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,514 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 111 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,517 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 112 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,521 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 113 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,524 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 114 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,526 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 115 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,529 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 116 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,532 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 117 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,535 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 118 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,538 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 119 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,540 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 120 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,543 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 121 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,546 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 122 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,549 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 123 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,552 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 124 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,554 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 125 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,557 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 126 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,559 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 127 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,562 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 128 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,565 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 129 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,568 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 130 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,570 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 131 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,573 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 132 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,576 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 133 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,578 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 134 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,581 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 135 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,584 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 136 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,587 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 137 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,590 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 138 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,592 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 139 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,596 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 140 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,600 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 141 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,604 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 142 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,606 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 143 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,609 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 144 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,612 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 145 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,615 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 146 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,618 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 147 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 14:24:07,645 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-01 14:24:07,648 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-01 14:24:07,654 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [663]: Slicing took 1.1670160293579102 seconds
2020-03-01 14:24:07,654 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [664]: Number of models per buildplate: {0: 1}
2020-03-01 14:24:07,654 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [678]: See if there is more to slice...
2020-03-01 14:24:07,710 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [181]: Socket state changed to Closing
2020-03-01 14:24:07,713 - DEBUG - [MainThread] UM.Backend.Backend._onSocketError [203]: Socket debug: Arcus Error (13): Closing socket because other side requested close.
2020-03-01 14:24:07,715 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [183]: Socket state changed to Closed
2020-03-01 14:24:07,716 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onBackendQuit [829]: Backend quit with return code 0. Resetting process and socket.
2020-03-01 14:24:10,446 - DEBUG - [MainThread] LinearAdvanceSettingPlugin.LinearAdvanceSettingPlugin._filterGcode [109]: No used extruders specify a linear advance factor
2020-03-01 14:24:10,652 - DEBUG - [MainThread] UM.Controller.setActiveStage [149]: Setting active stage to MonitorStage
2020-03-01 14:24:10,701 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:211: Error: Cannot assign [undefined] to QString
2020-03-01 14:24:10,720 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._processRequest [308]: Request [656347a4dbeb41a390bade99f1d6a259] started
2020-03-01 14:24:10,724 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-01 14:24:10,855 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-03-01 14:24:11,155 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestFinished [369]: Request [656347a4dbeb41a390bade99f1d6a259] finished.
2020-03-01 14:24:11,158 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-01 14:24:11,159 - INFO - [MainThread] SliceInfoPlugin.SliceInfo._onRequestFinished [275]: SliceInfo sent successfully
2020-03-01 14:24:20,962 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-03-01 14:24:39,494 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [772]: Resource created on OctoPrint instance: http://192.168.2.162/api/files/local/WDI3P_screw_box_top_M3.gcode
2020-03-01 14:39:54,036 - DEBUG - [MainThread] UM.Controller.setActiveStage [149]: Setting active stage to PrepareStage
2020-03-01 14:39:54,073 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-01 14:39:54,174 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-01 14:39:54,178 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-01 14:39:54,187 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/plugins/plugins/PrepareStage/PrepareMain.qml:16:5: QML ActionPanelWidget: Binding loop detected for property "width"
2020-03-01 14:39:54,207 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:79: ReferenceError: stop is not defined
2020-03-01 14:39:54,212 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:63: TypeError: Cannot read property of null
2020-03-01 14:39:54,215 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:91: TypeError: Cannot read property of null
2020-03-01 14:39:54,218 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:102: TypeError: Cannot read property of null
2020-03-01 14:39:54,220 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:103: TypeError: Cannot read property of null
2020-03-01 14:39:54,222 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:139: TypeError: Cannot read property of null
2020-03-01 14:39:54,225 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:140: TypeError: Cannot read property of null
2020-03-01 14:39:54,227 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:120: TypeError: Cannot read property of null
2020-03-01 14:39:54,229 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:122: TypeError: Cannot read property of null
2020-03-01 14:39:54,232 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-03-01 14:39:54,234 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:36: TypeError: Cannot read property of null
2020-03-01 14:39:54,237 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:37: TypeError: Cannot read property of null
2020-03-01 14:39:54,239 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:49: TypeError: Cannot read property of null
2020-03-01 14:39:54,241 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:59: TypeError: Cannot read property of null
2020-03-01 14:39:54,244 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:61: TypeError: Cannot read property of null
2020-03-01 14:39:54,246 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:63: TypeError: Cannot read property of null
2020-03-01 14:39:54,248 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ExtruderBox.qml:20: TypeError: Cannot read property of null
2020-03-01 14:39:54,251 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:29: TypeError: Cannot read property of null
2020-03-01 14:39:54,253 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:30: TypeError: Cannot read property of null
2020-03-01 14:39:54,255 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:40: TypeError: Cannot read property of null
2020-03-01 14:39:54,258 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:73: TypeError: Cannot read property of null
2020-03-01 14:39:54,260 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:135: TypeError: Cannot read property of null
2020-03-01 14:39:54,262 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:246: TypeError: Cannot read property of null
2020-03-01 14:39:54,265 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:247: TypeError: Cannot read property of null
2020-03-01 14:39:54,267 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:173: TypeError: Cannot read property of null
2020-03-01 14:39:54,269 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:175: TypeError: Cannot read property of null
2020-03-01 14:39:54,271 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:190: TypeError: Cannot read property of null
2020-03-01 14:39:54,274 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:193: TypeError: Cannot read property of null
2020-03-01 14:39:54,277 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:60: TypeError: Cannot read property of null
2020-03-01 14:39:54,279 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:248: TypeError: Cannot read property of null
2020-03-01 14:39:54,281 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:294: TypeError: Cannot read property of null
2020-03-01 14:39:54,284 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:26: TypeError: Cannot read property of null
2020-03-01 14:39:54,286 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:27: TypeError: Cannot read property of null
2020-03-01 14:39:54,290 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:388: TypeError: Cannot read property of null
2020-03-01 14:39:54,292 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:390: TypeError: Cannot read property of null
2020-03-01 14:39:54,295 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:391: TypeError: Cannot read property of null
2020-03-01 14:39:54,297 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:26: TypeError: Cannot read property of null
2020-03-01 14:39:54,300 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:27: TypeError: Cannot read property of null
2020-03-01 14:39:54,302 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:24: TypeError: Cannot read property of null
2020-03-01 14:39:54,304 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:30: TypeError: Cannot read property of null
2020-03-01 14:39:54,306 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:39: TypeError: Cannot read property of null
2020-03-01 14:39:54,309 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:24: TypeError: Cannot read property of null
2020-03-01 14:39:54,312 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:30: TypeError: Cannot read property of null
2020-03-01 14:39:54,314 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:39: TypeError: Cannot read property of null
2020-03-01 14:39:54,316 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:24: TypeError: Cannot read property of null
2020-03-01 14:39:54,319 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:30: TypeError: Cannot read property of null
2020-03-01 14:39:54,322 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:39: TypeError: Cannot read property of null
2020-03-01 14:39:54,324 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupTooltip.qml:67: TypeError: Cannot read property of null
2020-03-01 14:39:54,326 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupTooltip.qml:69: TypeError: Cannot read property of null
2020-03-01 14:39:54,328 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupTooltip.qml:71: TypeError: Cannot read property of null
2020-03-01 14:39:54,331 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:150: TypeError: Cannot read property of null
2020-03-01 14:39:54,333 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-03-01 14:39:54,336 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:166: TypeError: Cannot read property of null
2020-03-01 14:39:54,338 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:167: TypeError: Cannot read property of null
2020-03-01 14:39:54,340 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:178: TypeError: Cannot read property of null
2020-03-01 14:39:54,343 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:231: TypeError: Cannot read property of null
2020-03-01 14:39:54,345 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:241: TypeError: Cannot read property of null
2020-03-01 14:40:03,978 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-03-01 15:10:39,828 - INFO - [MainThread] UM.Controller.deleteAllNodesWithMeshData [386]: Clearing scene
2020-03-01 15:10:39,839 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-01 15:10:39,843 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-01 15:10:39,852 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: GroupedOp.(#=1) <UM.Operations.RemoveSceneNodeOperation.RemoveSceneNodeOperation object at 0x600020670558>, took 4ms
2020-03-01 15:10:39,855 - INFO - [MainThread] cura.CuraApplication._removeNodesWithLayerData [1900]: Clearing scene
2020-03-01 15:10:40,588 - WARNING - [MainThread] cura.UI.PrintInformation.setBaseName [360]: Unsupported Mime Type Database file extension 
2020-03-01 15:10:59,770 - INFO - [Thread-2] STLReader.STLReader.load_file [51]: Using NumPy-STL to load STL data.
2020-03-01 15:10:59,779 - DEBUG - [Thread-2] UM.Mesh.MeshData.calculateNormalsFromVertices [495]: Calculating normals took 0.0003619194030761719 seconds
2020-03-01 15:10:59,779 - DEBUG - [Thread-2] STLReader.STLReader._read [102]: Loaded a mesh with 5304 vertices
2020-03-01 15:10:59,800 - DEBUG - [Thread-2] UM.Mesh.MeshData.approximateConvexHull [452]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.010719060897827148 seconds. 525 input vertices. 525 output vertices.
2020-03-01 15:10:59,808 - DEBUG - [Thread-2] UM.FileHandler.ReadFileJob.run [71]: Loading file took 0.0 seconds
2020-03-01 15:10:59,822 - DEBUG - [Thread-2] UM.Mesh.MeshData.approximateConvexHull [452]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.009382009506225586 seconds. 525 input vertices. 525 output vertices.
2020-03-01 15:10:59,858 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: <UM.Operations.AddSceneNodeOperation.AddSceneNodeOperation object at 0x600020673098>, took 12ms
2020-03-01 15:11:10,011 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-03-01 15:11:14,794 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: ScaleOp.(node=<CuraSceneNode object: 'spaceship_earth_top.STL'>,scale=<1.4,1.4,1.4>,mode=relative), took 5ms
2020-03-01 15:11:14,903 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: PlatformPhysicsOp.(trans.=<0.0,4.69,0.0>), took 1ms
2020-03-01 15:11:23,126 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: ScaleOp.(node=<CuraSceneNode object: 'spaceship_earth_top.STL'>,scale=<1.07,1.07,1.07>,mode=relative), took 6ms
2020-03-01 15:11:23,226 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: PlatformPhysicsOp.(trans.=<0.0,1.17,0.0>), took 1ms
2020-03-01 15:11:36,310 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: ScaleOp.(node=<CuraSceneNode object: 'spaceship_earth_top.STL'>,scale=<1.0,0.2,1.0>,mode=relative), took 6ms
2020-03-01 15:11:36,413 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: PlatformPhysicsOp.(trans.=<0.0,-14.1,0.0>), took 1ms
2020-03-01 15:11:45,019 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-03-01 15:12:17,909 - INFO - [MainThread] cura.UI.MachineActionManager.addDefaultMachineActions [56]: Default machine actions have been added for machine definition [wanhao_i3plus], do nothing.
2020-03-01 15:12:17,919 - WARNING - [MainThread] cura.Settings.GlobalStack.addExtruder [179]: Extruder [wanhao_i3plus_extruder_0 #3] has already been added to this stack [GreyLeader]
2020-03-01 15:12:17,922 - WARNING - [MainThread] cura.Settings.ExtruderManager.registerExtruder [156]: Extruder [wanhao_i3plus_extruder_0 #3] has already been registered on machine [GreyLeader], not doing anything
2020-03-01 15:12:17,926 - INFO - [MainThread] UM.Logger.info [112]: Initializing Active Machine...
2020-03-01 15:12:18,062 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-01 15:12:18,205 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device GreyLeader already added
2020-03-01 15:12:18,207 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device GreyLeader already added
2020-03-01 15:12:18,210 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device GreyLeader already added
2020-03-01 15:12:18,212 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device GreyLeader already added
2020-03-01 15:12:18,214 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device GreyLeader already added
2020-03-01 15:12:18,215 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [303]: Connection with instance GreyLeader with url http://192.168.2.156:80/ started
2020-03-01 15:12:18,219 - WARNING - [MainThread] UM.OutputDevice.OutputDeviceManager.removeOutputDevice [179]: Could not find output device with id OrangeLeader to remove
2020-03-01 15:12:18,222 - WARNING - [MainThread] UM.OutputDevice.OutputDeviceManager.removeOutputDevice [179]: Could not find output device with id OrangeLeader to remove
2020-03-01 15:12:18,233 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/SettingsMenu.qml:51: TypeError: Cannot read property 'isEnabled' of undefined
2020-03-01 15:12:18,236 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/SettingsMenu.qml:44: TypeError: Cannot read property 'isEnabled' of undefined
2020-03-01 15:12:18,240 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/MaterialMenu.qml:26: TypeError: Cannot read property 'isEnabled' of undefined
2020-03-01 15:12:18,243 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/MaterialMenu.qml:28: TypeError: Cannot read property 'material' of undefined
2020-03-01 15:12:18,246 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-01 15:12:18,308 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-01 15:12:18,325 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-01 15:12:18,327 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-01 15:12:18,880 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device GreyLeader already added
2020-03-01 15:12:18,883 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device GreyLeader already added
2020-03-01 15:12:18,885 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device GreyLeader already added
2020-03-01 15:12:18,888 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device GreyLeader already added
2020-03-01 15:12:18,890 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device GreyLeader already added
2020-03-01 15:12:18,892 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device GreyLeader already added
2020-03-01 15:12:18,912 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [135]: New error check scheduled.
2020-03-01 15:12:19,442 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-01 15:12:19,451 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [63]: Updating QualityProfilesDropDownMenuModel.
2020-03-01 15:12:20,042 - INFO - [MainThread] cura.Machines.MachineErrorChecker._setResult [187]: Error check finished, result = False, time = 1.1s
2020-03-01 15:12:20,309 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [741]: Set OctoPrint camera url to http://192.168.2.156:80/webcam/?action=stream
2020-03-01 15:12:24,018 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [225]: Starting to slice...
2020-03-01 15:12:24,018 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [243]: Going to slice build plate [0]!
2020-03-01 15:12:24,028 - DEBUG - [MainThread] UM.Backend.Backend._createSocket [213]: Previous socket existed. Closing that first.
2020-03-01 15:12:24,097 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [173]: Socket state changed to Listening
2020-03-01 15:12:24,242 - INFO - [MainThread] UM.Backend.Backend.startEngine [81]: Started engine process: /Applications/Ultimaker Cura 3.app/Contents/MacOS/CuraEngine
2020-03-01 15:12:24,302 - DEBUG - [MainThread] UM.Backend.Backend._backendLog [101]: [Backend] Calling engine with: ['/Applications/Ultimaker Cura 3.app/Contents/MacOS/CuraEngine', 'connect', '127.0.0.1:49674', '']
2020-03-01 15:12:24,305 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-03-01 15:12:24,308 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] Cura_SteamEngine version 4.5.0
2020-03-01 15:12:24,311 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] Copyright (C) 2019 Ultimaker
2020-03-01 15:12:24,313 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-03-01 15:12:24,315 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] This program is free software: you can redistribute it and/or modify
2020-03-01 15:12:24,318 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] it under the terms of the GNU Affero General Public License as published by
2020-03-01 15:12:24,320 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] the Free Software Foundation, either version 3 of the License, or
2020-03-01 15:12:24,322 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] (at your option) any later version.
2020-03-01 15:12:24,325 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-03-01 15:12:24,328 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] This program is distributed in the hope that it will be useful,
2020-03-01 15:12:24,330 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] but WITHOUT ANY WARRANTY; without even the implied warranty of
2020-03-01 15:12:24,332 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
2020-03-01 15:12:24,334 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] GNU Affero General Public License for more details.
2020-03-01 15:12:24,337 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [177]: Socket state changed to Connected
2020-03-01 15:12:24,339 - DEBUG - [MainThread] UM.Backend.Backend._onSocketStateChanged [167]: Backend connected on port 49674
2020-03-01 15:12:24,342 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-03-01 15:12:24,344 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] You should have received a copy of the GNU Affero General Public License
2020-03-01 15:12:24,347 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] along with this program.  If not, see <http://www.gnu.org/licenses/>.
2020-03-01 15:12:24,445 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onStartSliceCompleted [429]: Sending slice message took 0.4272599220275879 seconds
2020-03-01 15:12:24,657 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING]  -s extruders_enabled_count="1" -s support_interface_density="100" -s cool_fan_speed="100.0" -s raft_base_thickness="0.36" -s bridge_skin_material_flow="60" -s slicing_tolerance="middle" -s material_end_of_filament_purge_speed="0.5" -s prime_tower_size="20" -s retraction_retract_speed="25" -s speed_layer_0="30.0" -s infill="0" -s small_feature_speed_factor="50" -s speed_prime_tower="60" -s support_brim_enable="False" -s infill_multiplier="1" -s gradual_support_infill_steps="0" -s initial_extruder_nr="0" -s infill_extruder_nr="-1" -s infill_sparse_density="20" -s bottom_skin_expand_distance="0.8" -s machine_nozzle_cool_down_speed="2.0" -s infill_offset_x="0" -s machine_depth="190" -s adhesion_z_offset_extensive_processing="False" -s limit_support_retractions="True" -s machine_max_acceleration_y="9000" -s infill_offset_y="0" -s acceleration_print_layer_0="3000" -s wall_min_flow_retract="False" -s speed_support_roof="20.0" -s xy_offset_layer_0="0" -s adhesion_type="skirt" -s z_seam_position="back" -s material_guid="" -s magic_spiralize="False" -s material_linear_advance_factor_support_interface="0" -s machine_max_acceleration_x="9000" -s material_linear_advance_factor_infill="0" -s print_temperature="210" -s skin_angles="[ ]" -s gradual_support_infill_step_height="1" -s support_conical_angle="30" -s raft_surface_acceleration="3000" -s jerk_layer_0="20" -s machine_max_feedrate_x="299792458000" -s support_pattern="lines" -s jerk_infill="20" -s speed_equalize_flow_enabled="False" -s top_thickness="0.8" -s bottom_skin_preshrink="0.8" -s raft_surface_line_spacing="0.4" -s wall_line_width="0.4" -s xy_offset="0" -s alternate_carve_order="True" -s travel_avoid_other_parts="True" -s raft_interface_speed="22.5" -s travel_avoid_distance="0.625" -s support_interface_height="1" -s jerk_travel_layer_0="30.0" -s date="01-03-2020" -s wireframe_flow="100" -s machine_acceleration="4000" -s machine_minimum_feedrate="0.0" -s skin_preshrink="0.8" -s jerk_wall="20" -s retract_at_layer_change="False" -s jerk_travel="30" -s support_skip_some_zags="False" -s minimum_roof_area="1.0" -s wireframe_flow_connection="100" -s bridge_skin_density="100" -s skirt_brim_line_width="0.4" -s top_bottom_pattern="lines" -s travel_compensate_overlapping_walls_0_enabled="True" -s flow_rate_max_extrusion_offset="0" -s material_diameter="2.85" -s support_bottom_line_width="0.4" -s raft_smoothing="5" -s speed_topbottom="30.0" -s wireframe_drag_along="0.6" -s material_break_speed="25" -s raft_interface_acceleration="3000" -s minimum_polygon_circumference="1.0" -s support_interface_skip_height="0.3" -s speed_print="60" -s skin_edge_support_layers="0" -s support_type="buildplate" -s support_roof_line_width="0.4" -s wireframe_printspeed_bottom="5" -s raft_surface_line_width="0.4" -s prime_tower_min_volume="6" -s prime_blob_enable="False" -s switch_extruder_prime_speed="20" -s wall_x_extruder_nr="-1" -s machine_steps_per_mm_z="50" -s smooth_spiralized_contours="True" -s ooze_shield_dist="2" -s bridge_wall_material_flow="50" -s cool_fan_full_layer="2" -s roofing_material_flow="100" -s wipe_hop_speed="10" -s infill_angles="[ ]" -s infill_line_distance="4.0" -s minimum_bottom_area="1.0" -s minimum_support_area="0.0" -s material_linear_advance_factor_wall_0="0" -s wall_0_wipe_dist="0.2" -s switch_extruder_extra_prime_amount="0" -s material_extrusion_cool_down_speed="0.7" -s wall_x_material_flow="100" -s support_xy_distance_overhang="0.2" -s wireframe_printspeed_up="5" -s resolution="0" -s retraction_hop="1" -s jerk_wall_0="20" -s skin_material_flow="100" -s support_bottom_density="100" -s jerk_support_interface="20" -s material_print_temperature_layer_0="210" -s retraction_min_travel="0.8" -s support_xy_overrides_z="z_overrides_xy" -s min_infill_area="0" -s machine_nozzle_tip_outer_diameter="1" -s machine_steps_per_mm_x="50" -s material_break_preparation_temperature="210" -s machine_nozzle_size="0.4" -s support_initial_layer_line_distance="0" -s center_object="False" -s spaghetti_inset="0.2" -s mold_enabled="False" -s acceleration_travel="5000" -s acceleration_wall="3000" -s support_bottom_material_flow="100" -s ironing_enabled="False" -s cooling="0" -s support_infill_angles="[ ]" -s shell="0" -s bridge_skin_material_flow_2="100" -s speed_support_interface="40.0" -s meshfix="0" -s acceleration_skirt_brim="3000" -s support_line_distance="0" -s retraction_enable="True" -s retraction_hop_enabled="False" -s switch_extruder_retraction_speed="20" -s acceleration_roofing="3000" -s anti_overhang_mesh="False" -s cool_min_layer_time_fan_speed_max="10" -s wipe_retraction_speed="25" -s retraction_amount="6.5" -s retraction_combing="all" -s material_flow_layer_0="100" -s wall_material_flow="100" -s extruder_prime_pos_z="0" -s support_tower_roof_angle="65" -s connect_skin_polygons="False" -s infill_pattern="grid" -s magic_fuzzy_skin_thickness="0.3" -s meshfix_extensive_stitching="False" -s infill_wipe_dist="0.1" -s skirt_brim_material_flow="100" -s bridge_skin_speed="15.0" -s mesh_position_x="0" -s prime_tower_position_y="165.6" -s jerk_wall_x="20" -s support_bottom_extruder_nr="0" -s support_roof_height="1.2" -s cutting_mesh="False" -s machine_max_jerk_xy="20.0" -s support_material_flow="100" -s bridge_fan_speed="100" -s support_line_width="0.4" -s ooze_shield_enabled="False" -s support_extruder_nr="0" -s wall_thickness="0.8" -s support_bottom_distance="0" -s material_crystallinity="False" -s machine_steps_per_mm_e="1600" -s dual="0" -s support_bottom_enable="False" -s wireframe_nozzle_clearance="1" -s speed_infill="60" -s machine_nozzle_id="unknown" -s wipe_brush_pos_x="100" -s acceleration_travel_layer_0="5000.0" -s meshfix_maximum_deviation="0.05" -s cool_fan_enabled="True" -s wall_overhang_angle="90" -s cool_fan_speed_max="100.0" -s raft_surface_layers="2" -s skirt_brim_minimal_length="250" -s material_linear_advance_factor="0" -s cool_min_layer_time="5" -s day="Sun" -s wipe_retraction_enable="True" -s travel_avoid_supports="False" -s acceleration_infill="3000" -s material_bed_temperature="66" -s bridge_skin_material_flow_3="110" -s bridge_fan_speed_2="0" -s initial_bottom_layers="8" -s support_interface_pattern="concentric" -s cross_infill_density_image="" -s adaptive_layer_height_variation="0.1" -s infill_wall_line_count="0" -s support_supported_skin_fan_speed="100" -s extruder_prime_pos_y="0" -s machine_name="Wanhao Duplicator i3 Plus" -s retraction_prime_speed="25" -s material_linear_advance_factor_prime_tower="0" -s z_seam_type="sharpest_corner" -s meshfix_keep_open_polygons="False" -s support_use_towers="True" -s infill_support_enabled="False" -s cool_fan_speed_0="0" -s support_brim_line_count="20" -s blackmagic="0" -s material_print_temp_wait="True" -s support_roof_angles="[ ]" -s infill_mesh_order="0" -s support="0" -s spaghetti_infill_enabled="False" -s acceleration_support="3000" -s support_interface_offset="0.0" -s support_tree_enable="True" -s acceleration_wall_0="3000" -s wireframe_top_jump="0.6" -s jerk_support_bottom="20" -s speed_support_bottom="20.0" -s support_conical_min_width="5.0" -s bottom_layers="8" -s material_flow_dependent_temperature="False" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s support_wall_count="1" -s machine_max_acceleration_z="100" -s skin_edge_support_thickness="0" -s coasting_min_volume="0.8" -s material_linear_advance_factor_wall="0" -s cool_fan_full_at_height="0.3" -s draft_shield_dist="10" -s layer_height="0.1" -s material_break_preparation_retracted_position="-16" -s infill_mesh="False" -s mold_angle="40" -s raft_speed="30.0" -s machine_max_jerk_z="0.4" -s support_tree_angle="40" -s wall_line_width_0="0.4" -s cross_infill_pocket_size="4.0" -s machine_max_jerk_e="5.0" -s raft_margin="15" -s raft_surface_speed="30.0" -s infill_enable_travel_optimization="False" -s machine_height="180" -s travel_retract_before_outer_wall="False" -s infill_support_angle="40" -s adaptive_layer_height_variation_step="0.01" -s raft_surface_jerk="20" -s bridge_sparse_infill_max_density="0" -s wireframe_printspeed_flat="5" -s draft_shield_height_limitation="full" -s magic_fuzzy_skin_enabled="False" -s jerk_enabled="False" -s support_mesh_drop_down="True" -s wireframe_roof_fall_down="2" -s wireframe_strategy="compensate" -s machine_gcode_flavor="RepRap (Marlin/Sprinter)" -s conical_overhang_angle="50" -s infill_overlap_mm="0.04" -s mesh_position_z="0" -s travel_speed="120" -s speed="0" -s small_hole_max_size="0" -s material_bed_temp_prepend="True" -s material="0" -s infill_before_walls="True" -s meshfix_maximum_resolution="0.5" -s wipe_repeat_count="5" -s support_tree_branch_distance="1" -s retraction_speed="25" -s gradual_infill_steps="0" -s machine_show_variants="False" -s support_interface_material_flow="100" -s infill_overlap="10" -s jerk_support="20" -s wall_line_width_x="0.4" -s roofing_extruder_nr="-1" -s raft_base_acceleration="3000" -s wall_extruder_nr="-1" -s adaptive_layer_height_threshold="0.2" -s min_skin_width_for_expansion="4.898587196589413e-17" -s material_no_load_move_factor="0.940860215" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s max_skin_angle_for_expansion="90" -s sub_div_rad_add="0.4" -s support_tree_branch_diameter_angle="5" -s top_bottom_pattern_0="lines" -s alternate_extra_perimeter="False" -s support_roof_enable="True" -s bridge_wall_coast="100" -s raft_interface_fan_speed="0" -s support_offset="0" -s wireframe_fall_down="0.5" -s material_flow="100" -s cross_support_density_image="" -s wireframe_height="3" -s z_seam_relative="False" -s support_tower_maximum_supported_diameter="3.0" -s support_interface_extruder_nr="0" -s nozzle_disallowed_areas="[]" -s support_xy_distance="0.7" -s speed_wall="30.0" -s bridge_enable_more_layers="True" -s conical_overhang_enabled="False" -s speed_travel_layer_0="60.0" -s draft_shield_height="10" -s z_seam_x="100.0" -s retraction_combing_max_distance="0" -s support_infill_rate="0" -s spaghetti_max_infill_angle="10" -s acceleration_support_interface="3000" -s machine_feeder_wheel_diameter="10.0" -s retraction_hop_only_when_collides="False" -s extruder_prime_pos_x="0" -s build_volume_temperature="28" -s layer_start_y="0.0" -s material_break_retracted_position="-50" -s material_initial_print_temperature="200" -s support_infill_extruder_nr="0" -s coasting_speed="90" -s carve_multiple_volumes="False" -s flow_rate_extrusion_offset_factor="100" -s acceleration_wall_x="3000" -s skin_overlap_mm="0.02" -s small_feature_max_length="0.0" -s wall_0_extruder_nr="-1" -s material_maximum_park_duration="300" -s machine_nozzle_temp_enabled="True" -s switch_extruder_retraction_amount="16" -s skirt_brim_speed="30.0" -s wipe_retraction_extra_prime_amount="0" -s ironing_only_highest_layer="False" -s acceleration_topbottom="3000" -s machine_settings="0" -s adhesion_extruder_nr="0" -s mold_width="5" -s jerk_support_infill="20" -s wall_overhang_speed_factor="100" -s jerk_prime_tower="20" -s skin_outline_count="1" -s bridge_skin_speed_2="15.0" -s machine_max_feedrate_y="299792458000" -s support_roof_material_flow="100" -s bridge_skin_density_2="75" -s support_tower_diameter="3.0" -s material_linear_advance_factor_support="0" -s command_line_settings="0" -s brim_replaces_support="True" -s prime_tower_wipe_enabled="True" -s fill_perimeter_gaps="everywhere" -s skin_overlap="5" -s print_sequence="all_at_once" -s acceleration_support_infill="3000" -s brim_gap="0" -s spaghetti_infill_extra_volume="0" -s support_connect_zigzags="True" -s adaptive_layer_height_enabled="False" -s travel_compensate_overlapping_walls_enabled="True" -s roofing_pattern="lines" -s fill_outline_gaps="False" -s support_zag_skip_count="0" -s machine_filament_park_distance="16" -s acceleration_print="3000" -s material_linear_advance_factor_wall_x="0" -s material_final_print_temperature="195" -s ooze_shield_angle="60" -s machine_endstop_positive_direction_x="False" -s travel_compensate_overlapping_walls_x_enabled="True" -s coasting_volume="0.064" -s machine_endstop_positive_direction_z="True" -s small_feature_speed_factor_0="50" -s machine_shape="rectangular" -s machine_heated_bed="True" -s machine_use_extruder_offset_to_offset_coords="True" -s brim_outside_only="True" -s material_standby_temperature="150" -s support_bottom_stair_step_height="0.3" -s speed_roofing="30.0" -s roofing_line_width="0.4" -s material_print_temp_prepend="True" -s wireframe_printspeed_down="5" -s minimum_interface_area="1.0" -s draft_shield_enabled="False" -s speed_support="60" -s adhesion_z_offset="0" -s wireframe_roof_outer_delay="0.2" -s ironing_inset="0.2" -s bridge_fan_speed_3="0" -s initial_layer_line_width_factor="100.0" -s machine_start_gcode="" -s experimental="0" -s bridge_wall_min_length="5" -s prime_tower_position_x="195.6" -s wipe_retraction_amount="6.5" -s material_break_temperature="50" -s top_bottom_extruder_nr="-1" -s acceleration_support_roof="3000" -s support_roof_offset="0.0" -s wall_0_material_flow="100" -s wireframe_flow_flat="100" -s speed_print_layer_0="30.0" -s default_material_bed_temperature="60" -s raft_jerk="20" -s machine_end_gcode="" -s machine_center_is_zero="False" -s support_conical_enabled="False" -s material_anti_ooze_retraction_speed="5" -s machine_head_with_fans_polygon="[[-20, 10], [10, 10], [10, -10], [-20, -10]]" -s z_seam_corner="z_seam_corner_inner" -s support_interface_angles="[ ]" -s bottom_thickness="0.8" -s raft_interface_line_spacing="1.0" -s material_flush_purge_length="60" -s machine_nozzle_heat_up_speed="2.0" -s cool_fan_speed_min="100.0" -s wipe_move_distance="20" -s bridge_skin_speed_3="15.0" -s magic_fuzzy_skin_point_dist="0.8" -s filter_out_tiny_gaps="True" -s spaghetti_flow="20" -s machine_heated_build_volume="False" -s extruder_prime_pos_abs="False" -s material_adhesion_tendency="10" -s infill_sparse_thickness="0.1" -s speed_wall_0="30.0" -s machine_extruders_share_heater="False" -s cool_lift_head="False" -s zig_zaggify_infill="False" -s acceleration_enabled="False" -s support_roof_extruder_nr="0" -s layer_start_x="0.0" -s machine_min_cool_heat_time_window="50.0" -s multiple_mesh_overlap="0.15" -s wipe_retraction_retract_speed="25" -s support_bottom_pattern="concentric" -s material_break_preparation_speed="2" -s acceleration_support_bottom="3000" -s material_end_of_filament_purge_length="20" -s wireframe_roof_drag_along="0.8" -s support_bottom_line_distance="0.4" -s wall_min_flow="0" -s ironing_flow="10.0" -s acceleration_prime_tower="3000" -s retraction_hop_after_extruder_switch_height="1" -s skirt_gap="3" -s speed_ironing="20.0" -s machine_max_acceleration_e="10000" -s line_width="0.4" -s zig_zaggify_support="False" -s wipe_hop_enable="False" -s optimize_wall_printing_order="False" -s raft_interface_line_width="0.8" -s gantry_height="180" -s material_surface_energy="100" -s print_bed_temperature="66" -s magic_mesh_surface_mode="normal" -s raft_fan_speed="0" -s wireframe_up_half_speed="0.3" -s machine_max_feedrate_e="299792458000" -s spaghetti_infill_stepped="True" -s raft_surface_fan_speed="0" -s meshfix_union_all_remove_holes="False" -s speed_wall_x="60.0" -s raft_base_jerk="20" -s machine_extruder_count="1" -s jerk_support_roof="20" -s wireframe_top_delay="0" -s machine_endstop_positive_direction_y="False" -s jerk_topbottom="20" -s remove_empty_first_layers="True" -s support_bottom_height="1" -s raft_acceleration="3000" -s jerk_print_layer_0="20" -s wireframe_roof_inset="3" -s material_anti_ooze_retracted_position="-4" -s expand_skins_expand_distance="0.8" -s bridge_wall_speed="15.0" -s support_bottom_offset="0.0" -s wireframe_flat_delay="0.1" -s machine_nozzle_expansion_angle="45" -s brim_line_count="8" -s support_roof_line_distance="0.4" -s prime_tower_line_width="0.4" -s infill_line_width="0.4" -s magic_fuzzy_skin_outside_only="False" -s speed_equalize_flow_max="150" -s jerk_roofing="20" -s raft_base_line_width="0.8" -s coasting_enable="False" -s support_interface_line_width="0.4" -s support_bottom_angles="[ ]" -s support_skip_zag_per_mm="20" -s support_extruder_nr_layer_0="0" -s meshfix_maximum_travel_resolution="0.8" -s cool_min_speed="10" -s machine_disallowed_areas="[]" -s support_interface_enable="False" -s bridge_skin_density_3="80" -s machine_max_feedrate_z="299792458000" -s support_roof_density="100" -s spaghetti_max_height="2.0" -s skirt_line_count="4" -s retraction_count_max="90" -s retraction_extrusion_window="6.5" -s support_fan_enable="False" -s support_roof_pattern="concentric" -s support_mesh="False" -s wireframe_straight_before_down="20" -s material_print_temperature="210" -s retraction_extra_prime_amount="0" -s wireframe_printspeed="5" -s machine_steps_per_mm_y="50" -s support_tree_branch_diameter="2" -s speed_slowdown_layers="2" -s default_material_print_temperature="210" -s roofing_layer_count="0" -s relative_extrusion="False" -s wall_0_inset="0" -s brim_width="8.0" -s speed_support_infill="60" -s raft_base_line_spacing="1.6" -s max_extrusion_before_wipe="10" -s ironing_pattern="zigzag" -s speed_travel="120" -s support_angle="70" -s raft_base_speed="22.5" -s layer_0_z_overlap="0.15" -s speed_z_hop="10" -s platform_adhesion="0" -s support_bottom_stair_step_width="5.0" -s raft_interface_jerk="20" -s material_shrinkage_percentage="0" -s ironing_line_spacing="0.1" -s skin_line_width="0.4" -s connect_infill_polygons="False" -s wireframe_bottom_delay="0" -s mesh_position_y="0" -s infill_randomize_start_location="False" -s machine_nozzle_head_distance="3" -s support_brim_width="8.0" -s top_layers="8" -s support_infill_sparse_thickness="0.1" -s material_bed_temperature_layer_0="66" -s clean_between_layers="False" -s travel="0" -s material_bed_temp_wait="True" -s raft_airgap="0.3" -s material_flush_purge_speed="0.5" -s support_enable="False" -s prime_tower_enable="False" -s raft_surface_thickness="0.1" -s jerk_skirt_brim="20" -s machine_heat_zone_length="16" -s gradual_infill_step_height="1.5" -s outer_inset_first="False" -s prime_tower_brim_enable="False" -s top_skin_preshrink="0.8" -s top_skin_expand_distance="0.8" -s jerk_print="20" -s mold_roof_height="0.5" -s jerk_ironing="20" -s roofing_angles="[ ]" -s support_top_distance="0.1" -s retraction_hop_after_extruder_switch="True" -s material_linear_advance_factor_skirt_brim="0" -s layer_height_0="0.3" -s switch_extruder_retraction_speeds="20" -s machine_firmware_retract="False" -s meshfix_union_all="True" -s support_z_distance="0.1" -s bridge_settings_enabled="False" -s z_seam_y="190" -s acceleration_layer_0="3000" -s raft_interface_thickness="0.15000000000000002" -s wall_line_count="2" -s magic_fuzzy_skin_point_density="1.25" -s top_bottom_thickness="0.8" -s machine_width="200" -s prime_tower_flow="100" -s acceleration_ironing="3000" -s raft_base_fan_speed="0" -s support_tree_collision_resolution="0.2" -s skin_no_small_gaps_heuristic="False" -s wipe_hop_amount="1" -s support_join_distance="2.0" -s machine_buildplate_type="glass" -s time="15:12:24" -s infill_material_flow="100" -s wireframe_enabled="False" -s material_linear_advance_factor_topbottom="0" -s wipe_retraction_prime_speed="25" -s wipe_pause="0" -s bridge_skin_support_threshold="50" -e0 -s switch_extruder_retraction_speeds="20" -s support_interface_density="100" -s cool_fan_speed="80" -s raft_base_thickness="0.36" -s machine_nozzle_offset_x="0" -s initial_layer_line_width_factor="100.0" -s bridge_skin_material_flow="60" -s material_end_of_filament_purge_speed="0.5" -s retraction_retract_speed="40" -s speed_layer_0="12" -s infill="0" -s small_feature_speed_factor="50" -s support_infill_sparse_thickness="0.1" -s speed_prime_tower="30" -s support_brim_enable="False" -s infill_multiplier="1" -s gradual_support_infill_steps="0" -s infill_sparse_density="32" -s bottom_skin_expand_distance="2.4" -s machine_nozzle_cool_down_speed="2.0" -s infill_offset_x="0" -s limit_support_retractions="True" -s machine_extruder_end_pos_x="0" -s infill_offset_y="0" -s acceleration_print_layer_0="3000" -s wall_min_flow_retract="False" -s speed_support_roof="20.0" -s xy_offset_layer_0="0" -s z_seam_position="back" -s material_guid="0ff92885-617b-4144-a03c-9989872454bc" -s material_linear_advance_factor_support_interface="0" -s material_linear_advance_factor_infill="0" -s material_break_preparation_speed="2" -s acceleration_support_bottom="3000" -s material_end_of_filament_purge_length="20" -s gradual_support_infill_step_height="1" -s support_conical_angle="30" -s raft_surface_acceleration="3000" -s support_roof_pattern="concentric" -s jerk_layer_0="20" -s support_pattern="lines" -s jerk_infill="20" -s speed_equalize_flow_enabled="False" -s top_thickness="0.8" -s bottom_skin_preshrink="2.4" -s raft_surface_line_spacing="0.4" -s skin_edge_support_layers="0" -s wall_line_width="0.4" -s xy_offset="0" -s travel_avoid_other_parts="True" -s raft_interface_speed="11.25" -s travel_avoid_distance="0.625" -s support_interface_height="1" -s wipe_move_distance="20" -s cool_fan_speed_min="80" -s acceleration_skirt_brim="3000" -s meshfix="0" -s support_bottom_material_flow="100" -s acceleration_wall="3000" -s ironing_enabled="False" -s acceleration_travel="5000" -s support_supported_skin_fan_speed="100" -s infill_wall_line_count="0" -s support_wall_count="1" -s skin_edge_support_thickness="0" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s experimental="0" -s support_skip_some_zags="False" -s travel_compensate_overlapping_walls_0_enabled="True" -s support_bottom_line_width="0.4" -s material_flow="100" -s support_offset="0" -s raft_smoothing="5" -s speed_topbottom="15.0" -s wipe_hop_enable="False" -s zig_zaggify_support="False" -s speed_print="30" -s prime_tower_min_volume="6" -s jerk_travel="30" -s material_linear_advance_factor_skirt_brim="0" -s support_tree_branch_diameter="2" -s machine_steps_per_mm_y="50" -s acceleration_support_interface="3000" -s spaghetti_max_infill_angle="10" -s bridge_wall_material_flow="50" -s wipe_hop_speed="10" -s jerk_wall_0="20" -s retraction_hop="1" -s wipe_pause="0" -s wipe_retraction_prime_speed="40" -s minimum_support_area="0.0" -s material_linear_advance_factor_wall_0="0" -s wall_0_wipe_dist="0.2" -s switch_extruder_extra_prime_amount="0" -s support_tower_maximum_supported_diameter="3.0" -s spaghetti_infill_extra_volume="0" -s support_connect_zigzags="True" -s support_xy_distance_overhang="0.2" -s bridge_skin_density_3="80" -s support_interface_enable="False" -s resolution="0" -s support_line_width="0.4" -s material_break_preparation_retracted_position="-16" -s support_xy_overrides_z="z_overrides_xy" -s min_infill_area="0" -s machine_nozzle_tip_outer_diameter="1" -s machine_steps_per_mm_x="50" -s infill_angles="[ ]" -s minimum_interface_area="1.0" -s skirt_brim_line_width="0.4" -s top_bottom_pattern="lines" -s cool_fan_full_layer="2" -s center_object="False" -s spaghetti_inset="0.2" -s gradual_infill_steps="0" -s jerk_travel_layer_0="30.0" -s mold_enabled="False" -s raft_surface_line_width="0.4" -s cooling="0" -s support_tree_collision_resolution="0.2" -s raft_base_fan_speed="0" -s material_print_temperature_layer_0="220" -s raft_interface_line_spacing="1.0" -s machine_nozzle_heat_up_speed="2.0" -s material_flush_purge_length="60" -s bridge_skin_material_flow_2="100" -s speed_support_interface="20.0" -s support_interface_offset="0.0" -s jerk_support="20" -s wall_line_width_x="0.4" -s support_line_distance="0" -s retraction_enable="True" -s switch_extruder_retraction_speed="20" -s retraction_hop_enabled="False" -s acceleration_roofing="3000" -s cool_min_layer_time_fan_speed_max="10" -s wipe_retraction_speed="40" -s retraction_amount="2.5" -s raft_speed="15.0" -s mold_angle="40" -s material_flow_layer_0="100" -s wall_material_flow="100" -s bridge_skin_material_flow_3="110" -s bridge_fan_speed_2="0" -s initial_bottom_layers="6" -s support_interface_pattern="concentric" -s connect_skin_polygons="False" -s infill_pattern="gyroid" -s material_flow_dependent_temperature="False" -s bottom_layers="6" -s magic_fuzzy_skin_thickness="0.3" -s meshfix_extensive_stitching="False" -s infill_wipe_dist="0.1" -s machine_extruder_start_pos_abs="False" -s skirt_brim_material_flow="100" -s bridge_skin_speed="10" -s jerk_wall_x="20" -s wipe_retraction_amount="2.5" -s material_break_temperature="50" -s support_roof_height="1.2" -s magic_fuzzy_skin_enabled="False" -s connect_infill_polygons="False" -s machine_extruder_start_code="" -s support_material_flow="100" -s bridge_fan_speed="100" -s bridge_sparse_infill_max_density="0" -s wall_thickness="0.8" -s support_bottom_distance="0" -s material_crystallinity="False" -s machine_steps_per_mm_e="1600" -s jerk_wall="20" -s dual="0" -s support_bottom_enable="False" -s skin_overlap="5" -s speed_infill="30" -s machine_nozzle_id="unknown" -s wipe_brush_pos_x="100" -s acceleration_travel_layer_0="5000.0" -s raft_surface_layers="2" -s skirt_brim_minimal_length="250" -s material_linear_advance_factor="0" -s cool_min_layer_time="5" -s wipe_retraction_enable="True" -s travel_avoid_supports="False" -s acceleration_infill="3000" -s speed_ironing="10.0" -s support_roof_line_width="0.4" -s extruder_prime_pos_y="0" -s material_linear_advance_factor_prime_tower="0" -s retraction_prime_speed="40" -s z_seam_type="sharpest_corner" -s prime_blob_enable="False" -s meshfix_keep_open_polygons="False" -s raft_surface_speed="15.0" -s infill_enable_travel_optimization="False" -s machine_nozzle_temp_enabled="True" -s switch_extruder_retraction_amount="16" -s skirt_brim_speed="12" -s material_maximum_park_duration="300" -s infill_material_flow="100" -s support_use_towers="True" -s infill_support_enabled="False" -s cool_fan_speed_0="0" -s support_brim_line_count="20" -s blackmagic="0" -s multiple_mesh_overlap="0.15" -s wipe_retraction_retract_speed="40" -s material_linear_advance_factor_wall_x="0" -s acceleration_print="3000" -s support_bottom_pattern="concentric" -s meshfix_maximum_deviation="0.05" -s cool_fan_enabled="True" -s wall_overhang_angle="90" -s cool_fan_speed_max="80" -s machine_extruder_end_code="" -s support_roof_angles="[ ]" -s retraction_hop_after_extruder_switch_height="1" -s machine_extruder_end_pos_abs="False" -s support="0" -s spaghetti_infill_enabled="False" -s acceleration_support="3000" -s acceleration_wall_0="3000" -s jerk_support_bottom="20" -s material_extrusion_cool_down_speed="0.7" -s speed_support_bottom="20.0" -s support_conical_min_width="5.0" -s coasting_min_volume="0.8" -s material_linear_advance_factor_wall="0" -s cool_fan_full_at_height="0.3" -s support_infill_angles="[ ]" -s shell="0" -s support_tower_diameter="3.0" -s machine_extruder_start_pos_x="0" -s wipe_hop_amount="1" -s support_join_distance="2.0" -s support_tree_angle="40" -s fill_perimeter_gaps="everywhere" -s prime_tower_wipe_enabled="True" -s machine_heat_zone_length="16" -s jerk_skirt_brim="20" -s raft_jerk="20" -s speed_print_layer_0="12" -s command_line_settings="0" -s material_linear_advance_factor_support="0" -s conical_overhang_angle="50" -s infill_overlap_mm="0.05600000000000001" -s mesh_position_z="0" -s speed="0" -s material_diameter="1.75" -s meshfix_union_all_remove_holes="False" -s gradual_infill_step_height="1.5" -s cool_lift_head="False" -s speed_wall_0="15.0" -s outer_inset_first="False" -s extruder_prime_pos_z="0" -s support_tower_roof_angle="65" -s meshfix_maximum_resolution="0.5" -s wipe_repeat_count="5" -s support_tree_branch_distance="1" -s wall_x_material_flow="100" -s min_skin_width_for_expansion="3.67394039744206e-17" -s material_no_load_move_factor="0.940860215" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s max_skin_angle_for_expansion="90" -s top_bottom_pattern_0="lines" -s alternate_extra_perimeter="False" -s support_roof_enable="True" -s slicing_tolerance="exclusive" -s machine_extruder_end_pos_y="0" -s cross_support_density_image="" -s z_seam_relative="False" -s support_xy_distance="0.7" -s speed_wall="15.0" -s material_final_print_temperature="205" -s machine_endstop_positive_direction_x="False" -s bridge_enable_more_layers="True" -s conical_overhang_enabled="False" -s speed_travel_layer_0="60.0" -s fill_outline_gaps="False" -s machine_filament_park_distance="16" -s support_zag_skip_count="0" -s material_break_retracted_position="-50" -s material_initial_print_temperature="210" -s switch_extruder_prime_speed="20" -s extruder_prime_pos_x="0" -s layer_start_y="0.0" -s filter_out_tiny_gaps="True" -s bridge_skin_speed_3="10" -s spaghetti_flow="20" -s magic_fuzzy_skin_point_dist="0.8" -s coasting_speed="90" -s skin_material_flow="100" -s support_bottom_density="100" -s acceleration_wall_x="3000" -s skin_overlap_mm="0.02" -s small_feature_max_length="0.0" -s support_initial_layer_line_distance="0" -s support_bottom_offset="0.0" -s bridge_wall_speed="10" -s meshfix_union_all="True" -s support_z_distance="0.1" -s infill_line_distance="1.25" -s minimum_bottom_area="1.0" -s retraction_combing_max_distance="0" -s z_seam_x="100.0" -s expand_skins_expand_distance="2.4" -s mesh_position_x="0" -s wipe_retraction_extra_prime_amount="0" -s jerk_support_roof="20" -s machine_endstop_positive_direction_y="False" -s coasting_volume="0.064" -s machine_endstop_positive_direction_z="True" -s small_feature_speed_factor_0="50" -s infill_support_angle="40" -s raft_surface_jerk="20" -s support_interface_skip_height="0.3" -s mold_width="5" -s infill_before_walls="True" -s material="0" -s jerk_support_infill="20" -s wall_overhang_speed_factor="100" -s jerk_prime_tower="20" -s skin_outline_count="1" -s material_anti_ooze_retraction_speed="5" -s support_conical_enabled="False" -s bridge_skin_speed_2="10" -s retract_at_layer_change="False" -s raft_base_jerk="20" -s speed_wall_x="30.0" -s support_roof_material_flow="100" -s bridge_skin_density_2="75" -s brim_replaces_support="True" -s acceleration_support_infill="3000" -s brim_gap="0" -s travel_compensate_overlapping_walls_enabled="True" -s roofing_pattern="lines" -s travel_compensate_overlapping_walls_x_enabled="True" -s wall_line_width_0="0.4" -s cross_infill_pocket_size="1.25" -s raft_margin="15" -s support_bottom_stair_step_height="0.3" -s brim_outside_only="True" -s material_standby_temperature="175" -s speed_roofing="15.0" -s roofing_line_width="0.4" -s speed_support="30" -s ironing_inset="0.2" -s bridge_fan_speed_3="0" -s support_tree_branch_diameter_angle="5" -s support_infill_rate="0" -s infill_randomize_start_location="False" -s mesh_position_y="0" -s wall_line_count="6" -s magic_fuzzy_skin_point_density="1.25" -s platform_adhesion="0" -s support_bottom_stair_step_width="5.0" -s speed_z_hop="10" -s retraction_speed="40" -s wall_0_material_flow="100" -s cool_min_speed="10" -s bridge_skin_density="100" -s raft_base_line_width="0.8" -s machine_nozzle_offset_y="0" -s extruder_nr="0" -s infill_overlap="14" -s support_interface_material_flow="100" -s magic_mesh_surface_mode="normal" -s raft_fan_speed="0" -s raft_interface_line_width="0.8" -s material_surface_energy="100" -s retraction_extrusion_window="2.5" -s support_fan_enable="False" -s machine_extruder_start_pos_y="0" -s extruder_prime_pos_abs="False" -s material_adhesion_tendency="0" -s infill_sparse_thickness="0.1" -s skin_no_small_gaps_heuristic="False" -s machine_nozzle_head_distance="3" -s support_brim_width="8.0" -s top_layers="6" -s material_break_preparation_temperature="220" -s layer_start_x="0.0" -s machine_min_cool_heat_time_window="50.0" -s support_bottom_line_distance="0.4" -s zig_zaggify_infill="False" -s wall_min_flow="0" -s ironing_flow="10.0" -s support_roof_offset="0.0" -s acceleration_support_roof="3000" -s acceleration_prime_tower="3000" -s skirt_gap="3" -s line_width="0.4" -s optimize_wall_printing_order="False" -s raft_acceleration="3000" -s support_bottom_height="1" -s raft_base_acceleration="3000" -s skirt_line_count="4" -s retraction_count_max="90" -s ironing_only_highest_layer="False" -s acceleration_topbottom="3000" -s machine_settings="0" -s small_hole_max_size="0" -s brim_line_count="8" -s support_roof_line_distance="0.4" -s infill_line_width="0.4" -s magic_fuzzy_skin_outside_only="False" -s prime_tower_line_width="0.4" -s jerk_print_layer_0="20" -s material_anti_ooze_retracted_position="-4" -s support_interface_angles="[ ]" -s bottom_thickness="0.8" -s speed_equalize_flow_max="150" -s jerk_roofing="20" -s minimum_roof_area="1.0" -s machine_extruder_cooling_fan_number="0" -s machine_nozzle_size="0.4" -s raft_interface_jerk="20" -s material_shrinkage_percentage="0" -s support_roof_density="100" -s spaghetti_max_height="2.0" -s bridge_skin_support_threshold="50" -s material_linear_advance_factor_topbottom="0" -s material_print_temperature="220" -s retraction_extra_prime_amount="0" -s default_material_print_temperature="200" -s roofing_layer_count="0" -s wall_0_inset="0" -s brim_width="8.0" -s speed_support_infill="30" -s raft_base_line_spacing="1.6" -s max_extrusion_before_wipe="10" -s roofing_material_flow="100" -s prime_tower_flow="100" -s acceleration_ironing="3000" -s raft_interface_acceleration="3000" -s spaghetti_infill_stepped="True" -s raft_surface_fan_speed="0" -s jerk_print="20" -s z_seam_y="190" -s retraction_min_travel="0.8" -s acceleration_layer_0="3000" -s material_break_speed="25" -s ironing_line_spacing="0.1" -s raft_airgap="0.3" -s material_flush_purge_speed="0.5" -s skin_line_width="0.4" -s machine_steps_per_mm_z="50" -s skin_angles="[ ]" -s skin_preshrink="2.4" -s clean_between_layers="False" -s travel="0" -s raft_surface_thickness="0.1" -s top_skin_preshrink="2.4" -s jerk_support_interface="20" -s cross_infill_density_image="" -s support_interface_line_width="0.4" -s support_skip_zag_per_mm="20" -s support_bottom_angles="[ ]" -s ironing_pattern="zigzag" -s speed_travel="150" -s support_angle="70" -s raft_base_speed="11.25" -s layer_0_z_overlap="0.15" -s top_skin_expand_distance="2.4" -s sub_div_rad_add="0.4" -s z_seam_corner="z_seam_corner_inner" -s roofing_angles="[ ]" -s jerk_ironing="20" -s top_bottom_thickness="0.8" -s support_top_distance="0.1" -s retraction_hop_after_extruder_switch="True" -s jerk_topbottom="20" -s bridge_wall_coast="100" -s raft_interface_fan_speed="0" -s raft_interface_thickness="0.15000000000000002" -s meshfix_maximum_travel_resolution="0.8" -s machine_feeder_wheel_diameter="10.0" -s retraction_hop_only_when_collides="False" -s coasting_enable="False" -s mold_roof_height="0.5" -g -e0 -l "0" -s extruder_nr="0"
2020-03-01 15:12:27,445 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 67 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 15:12:27,695 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-01 15:12:27,699 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-01 15:12:27,716 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [663]: Slicing took 3.6980209350585938 seconds
2020-03-01 15:12:27,716 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [664]: Number of models per buildplate: {0: 1}
2020-03-01 15:12:27,717 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [678]: See if there is more to slice...
2020-03-01 15:12:27,932 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [181]: Socket state changed to Closing
2020-03-01 15:12:27,936 - DEBUG - [MainThread] UM.Backend.Backend._onSocketError [203]: Socket debug: Arcus Error (13): Closing socket because other side requested close.
2020-03-01 15:12:27,939 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [183]: Socket state changed to Closed
2020-03-01 15:12:27,939 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onBackendQuit [829]: Backend quit with return code 0. Resetting process and socket.
2020-03-01 15:12:28,009 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-03-01 15:12:32,489 - DEBUG - [MainThread] LinearAdvanceSettingPlugin.LinearAdvanceSettingPlugin._filterGcode [109]: No used extruders specify a linear advance factor
2020-03-01 15:12:32,717 - DEBUG - [MainThread] UM.Controller.setActiveStage [149]: Setting active stage to MonitorStage
2020-03-01 15:12:32,768 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:211: Error: Cannot assign [undefined] to QString
2020-03-01 15:12:32,806 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._processRequest [308]: Request [cbef7d6f10f14a58bd9804b6677f93d7] started
2020-03-01 15:12:32,812 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-01 15:12:33,275 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestFinished [369]: Request [cbef7d6f10f14a58bd9804b6677f93d7] finished.
2020-03-01 15:12:33,278 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-01 15:12:33,280 - INFO - [MainThread] SliceInfoPlugin.SliceInfo._onRequestFinished [275]: SliceInfo sent successfully
2020-03-01 15:12:36,819 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-03-01 15:13:07,013 - DEBUG - [MainThread] UM.Message._onInactivityTriggered [88]: Hiding message because of inactivity
2020-03-01 15:14:14,869 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [772]: Resource created on OctoPrint instance: http://192.168.2.156/api/files/local/WDI3P_spaceship_earth_top.gcode
2020-03-01 15:14:45,017 - DEBUG - [MainThread] UM.Message._onInactivityTriggered [88]: Hiding message because of inactivity
2020-03-01 15:16:09,781 - DEBUG - [MainThread] UM.Controller.setActiveStage [149]: Setting active stage to PrepareStage
2020-03-01 15:16:09,815 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-01 15:16:09,879 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-01 15:16:09,882 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-01 15:16:09,888 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/plugins/plugins/PrepareStage/PrepareMain.qml:16:5: QML ActionPanelWidget: Binding loop detected for property "width"
2020-03-01 15:16:09,906 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:79: ReferenceError: stop is not defined
2020-03-01 15:16:09,912 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:63: TypeError: Cannot read property of null
2020-03-01 15:16:09,915 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:91: TypeError: Cannot read property of null
2020-03-01 15:16:09,917 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:102: TypeError: Cannot read property of null
2020-03-01 15:16:09,919 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:103: TypeError: Cannot read property of null
2020-03-01 15:16:09,922 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:139: TypeError: Cannot read property of null
2020-03-01 15:16:09,924 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:140: TypeError: Cannot read property of null
2020-03-01 15:16:09,927 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:120: TypeError: Cannot read property of null
2020-03-01 15:16:09,929 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:122: TypeError: Cannot read property of null
2020-03-01 15:16:09,932 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-03-01 15:16:09,934 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:36: TypeError: Cannot read property of null
2020-03-01 15:16:09,936 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:37: TypeError: Cannot read property of null
2020-03-01 15:16:09,938 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:49: TypeError: Cannot read property of null
2020-03-01 15:16:09,941 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:59: TypeError: Cannot read property of null
2020-03-01 15:16:09,943 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:61: TypeError: Cannot read property of null
2020-03-01 15:16:09,945 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:63: TypeError: Cannot read property of null
2020-03-01 15:16:09,947 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ExtruderBox.qml:20: TypeError: Cannot read property of null
2020-03-01 15:16:09,950 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:29: TypeError: Cannot read property of null
2020-03-01 15:16:09,952 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:30: TypeError: Cannot read property of null
2020-03-01 15:16:09,954 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:40: TypeError: Cannot read property of null
2020-03-01 15:16:09,956 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:73: TypeError: Cannot read property of null
2020-03-01 15:16:09,958 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:135: TypeError: Cannot read property of null
2020-03-01 15:16:09,961 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:246: TypeError: Cannot read property of null
2020-03-01 15:16:09,963 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:247: TypeError: Cannot read property of null
2020-03-01 15:16:09,966 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:173: TypeError: Cannot read property of null
2020-03-01 15:16:09,969 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:175: TypeError: Cannot read property of null
2020-03-01 15:16:09,972 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:190: TypeError: Cannot read property of null
2020-03-01 15:16:09,974 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:193: TypeError: Cannot read property of null
2020-03-01 15:16:09,977 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:60: TypeError: Cannot read property of null
2020-03-01 15:16:09,980 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:248: TypeError: Cannot read property of null
2020-03-01 15:16:09,982 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:294: TypeError: Cannot read property of null
2020-03-01 15:16:09,984 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:26: TypeError: Cannot read property of null
2020-03-01 15:16:09,986 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:27: TypeError: Cannot read property of null
2020-03-01 15:16:09,990 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:388: TypeError: Cannot read property of null
2020-03-01 15:16:09,992 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:390: TypeError: Cannot read property of null
2020-03-01 15:16:09,995 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:391: TypeError: Cannot read property of null
2020-03-01 15:16:09,997 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:26: TypeError: Cannot read property of null
2020-03-01 15:16:10,000 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:27: TypeError: Cannot read property of null
2020-03-01 15:16:10,002 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:24: TypeError: Cannot read property of null
2020-03-01 15:16:10,004 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:30: TypeError: Cannot read property of null
2020-03-01 15:16:10,006 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:39: TypeError: Cannot read property of null
2020-03-01 15:16:10,008 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:24: TypeError: Cannot read property of null
2020-03-01 15:16:10,011 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:30: TypeError: Cannot read property of null
2020-03-01 15:16:10,014 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:39: TypeError: Cannot read property of null
2020-03-01 15:16:10,016 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:24: TypeError: Cannot read property of null
2020-03-01 15:16:10,018 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:30: TypeError: Cannot read property of null
2020-03-01 15:16:10,021 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:39: TypeError: Cannot read property of null
2020-03-01 15:16:10,023 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupTooltip.qml:67: TypeError: Cannot read property of null
2020-03-01 15:16:10,025 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupTooltip.qml:69: TypeError: Cannot read property of null
2020-03-01 15:16:10,027 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupTooltip.qml:71: TypeError: Cannot read property of null
2020-03-01 15:16:10,030 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:150: TypeError: Cannot read property of null
2020-03-01 15:16:10,032 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-03-01 15:16:10,035 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:166: TypeError: Cannot read property of null
2020-03-01 15:16:10,037 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:167: TypeError: Cannot read property of null
2020-03-01 15:16:10,039 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:178: TypeError: Cannot read property of null
2020-03-01 15:16:10,041 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:231: TypeError: Cannot read property of null
2020-03-01 15:16:10,044 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:241: TypeError: Cannot read property of null
2020-03-01 15:37:06,254 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Blue Leader"._octoprint._tcp.local
2020-03-01 15:37:06,296 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Darth Pooky"._octoprint._tcp.local
2020-03-01 15:37:36,045 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Orange Leader"._octoprint._tcp.local
2020-03-01 16:47:46,465 - DEBUG - [MainThread] cura.TaskManagement.OnExitCallbackManager.triggerNextCallback [51]: No more on-app-exit callbacks to process. Tell the app to exit.
2020-03-01 20:02:25,116 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin FileLogger
2020-03-01 20:02:25,123 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin LegacyProfileReader
2020-03-01 20:02:25,129 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin AMFReader
2020-03-01 20:02:25,135 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin SimpleView
2020-03-01 20:02:25,142 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin SolidView
2020-03-01 20:02:25,150 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin FirmwareUpdateChecker
2020-03-01 20:02:25,155 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin SentryLogger
2020-03-01 20:02:25,164 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin SupportEraser
2020-03-01 20:02:25,170 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin PrepareStage
2020-03-01 20:02:25,215 - WARNING - [MainThread] UM.PluginRegistry.loadPlugin [412]: Plugin [CuraInventorPlugin] with supported sdk versions [['5.0.0', '6.0.0', '6.1.0', '5.0.0']] is incompatible with the current sdk version [7.1.0].
2020-03-01 20:02:25,223 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin LinearAdvanceSettingPlugin
2020-03-01 20:02:25,228 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin VersionInTitlebarPlugin
2020-03-01 20:02:25,235 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin OrientationPlugin
2020-03-01 20:02:25,250 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin OctoPrintPlugin
2020-03-01 20:02:25,256 - DEBUG - [MainThread] SidebarGUIPlugin.__matchVersion [48]: This version of the plugin is not compatible with this version of Cura. Please check for an update.
2020-03-01 20:02:25,256 - WARNING - [MainThread] SidebarGUIPlugin.register [23]: Plugin not loaded because of a version mismatch
2020-03-01 20:02:25,259 - WARNING - [MainThread] UM.PluginRegistry.loadPlugin [419]: Plugin SidebarGUIPlugin did not return any objects to register
2020-03-01 20:02:25,267 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin MeshTools
2020-03-01 20:02:25,273 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin ZOffsetPlugin
2020-03-01 20:02:25,279 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin CustomSupports
2020-03-01 20:02:25,287 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin MaterialSettingsPlugin
2020-03-01 20:02:25,289 - DEBUG - [MainThread] UM.PluginRegistry.loadPlugins [369]: Loading all plugins took 0.8838520050048828 seconds
2020-03-01 20:02:25,297 - INFO - [MainThread] UM.VersionUpgradeManager.upgrade [148]: Looking for old configuration files to upgrade.
2020-03-01 20:02:25,402 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-01 20:02:25,407 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-01 20:02:25,411 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-01 20:02:25,415 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-01 20:02:25,418 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-01 20:02:25,421 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-01 20:02:25,424 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-01 20:02:25,427 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-01 20:02:25,430 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-01 20:02:25,435 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-01 20:02:25,439 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-01 20:02:25,443 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-01 20:02:25,446 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-01 20:02:25,536 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ../3D4MakersFacilanC8/3d4makers_facilan_c8.xml.fdm_material, skip it
2020-03-01 20:02:29,328 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.loadAllMetadata [330]: Loading metadata into container registry took 3.6442577838897705 seconds
2020-03-01 20:02:29,488 - DEBUG - [MainThread] cura.Scene.CuraSceneController.setActiveBuildPlate [111]: Select build plate: 0
2020-03-01 20:02:29,495 - INFO - [MainThread] cura.CuraApplication.run [761]: Initializing machine error checker
2020-03-01 20:02:29,562 - INFO - [MainThread] cura.UI.MachineActionManager.addDefaultMachineActions [72]: Default machine actions added for machine definition [wanhao_i3plus]
2020-03-01 20:02:29,856 - WARNING - [MainThread] LocalContainerProvider.LocalContainerProvider._saveCachedDefinition [271]: The definition cache for definition fdmprinter failed to pickle.
2020-03-01 20:02:30,065 - INFO - [MainThread] cura.Settings.GlobalStack.addExtruder [184]: Extruder[wanhao_i3plus_extruder_0 #3] added to [GreyLeader] at position [0]
2020-03-01 20:02:30,068 - WARNING - [MainThread] cura.Settings.ExtruderManager.registerExtruder [156]: Extruder [wanhao_i3plus_extruder_0 #3] has already been registered on machine [GreyLeader], not doing anything
2020-03-01 20:02:30,070 - INFO - [MainThread] FirmwareUpdateChecker.FirmwareUpdateChecker.checkFirmwareVersion [74]: No machine with name Wanhao Duplicator i3 Plus in list of firmware to check.
2020-03-01 20:02:30,210 - DEBUG - [MainThread] cura.Machines.ContainerTree.__getitem__ [106]: Adding container tree for wanhao_i3plus took 0.12406492233276367 seconds.
2020-03-01 20:02:30,214 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: BQ_PauseAtHeight
2020-03-01 20:02:30,216 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: ChangeAtZ
2020-03-01 20:02:30,217 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: ColorMix
2020-03-01 20:02:30,218 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: DisplayFilenameAndLayerOnLCD
2020-03-01 20:02:30,219 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: DisplayRemainingTimeOnLCD
2020-03-01 20:02:30,220 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: FilamentChange
2020-03-01 20:02:30,220 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: InsertAtLayerChange
2020-03-01 20:02:30,221 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: PauseAtHeight
2020-03-01 20:02:30,222 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: PauseAtHeightRepRapFirmwareDuet
2020-03-01 20:02:30,223 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: PauseAtHeightforRepetier
2020-03-01 20:02:30,224 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: RetractContinue
2020-03-01 20:02:30,225 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: SearchAndReplace
2020-03-01 20:02:30,226 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: Stretch
2020-03-01 20:02:30,226 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: TimeLapse
2020-03-01 20:02:30,227 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: UsePreviousProbeMeasurements
2020-03-01 20:02:30,321 - INFO - [MainThread] cura.CuraApplication.run [766]: Initializing machine manager
2020-03-01 20:02:30,337 - INFO - [MainThread] cura.CuraApplication.run [771]: Initializing container manager
2020-03-01 20:02:30,478 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-01 20:02:30,486 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [303]: Connection with instance GreyLeader with url http://192.168.2.156:80/ started
2020-03-01 20:02:30,525 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [135]: New error check scheduled.
2020-03-01 20:02:30,548 - DEBUG - [MainThread] UM.Scene.Camera._preferencesChanged [246]: Changing perspective mode to perspective.
2020-03-01 20:02:30,974 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device GreyLeader already added
2020-03-01 20:02:31,011 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [158]: Loading theme file: /Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/themes/cura-dark/theme.json
2020-03-01 20:02:31,015 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [158]: Loading theme file: /Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/themes/cura-light/theme.json
2020-03-01 20:02:31,019 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Blue Leader"._octoprint._tcp.local
2020-03-01 20:02:31,045 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Orange Leader"._octoprint._tcp.local
2020-03-01 20:02:31,066 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Darth Pooky"._octoprint._tcp.local
2020-03-01 20:02:31,263 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [231]: Loaded theme /Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/themes/cura-light
2020-03-01 20:02:31,268 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [231]: Loaded theme /Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/themes/cura-dark
2020-03-01 20:02:31,717 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin._createView [304]: Creating post processing plugin view.
2020-03-01 20:02:31,862 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin._createView [314]: Post processing view created.
2020-03-01 20:02:32,037 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._parseJWT [91]: There was no auth data or access token
2020-03-01 20:02:32,039 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._parseJWT [91]: There was no auth data or access token
2020-03-01 20:02:32,041 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._parseJWT [91]: There was no auth data or access token
2020-03-01 20:02:32,044 - WARNING - [MainThread] UM.Qt.Bindings.Theme.getImage [133]: No image header_pattern defined in Theme
2020-03-01 20:02:32,521 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-01 20:02:32,524 - WARNING - [MainThread] UM.Decorators.deprecated_function [20]: <function GlobalStack.extruders at 0x600004034408> is deprecated (since 4.4): Please use extruderList instead.
2020-03-01 20:02:32,654 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:125:27: Unable to assign [undefined] to int
2020-03-01 20:02:32,657 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:76:29: Unable to assign null to double
2020-03-01 20:02:32,666 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._createAdditionalComponentsView [350]: Creating additional ui components for OctoPrint-connected printers.
2020-03-01 20:02:32,673 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/Resources/qml/QtQuick/Controls/Button.qml:99: TypeError: Cannot read property of null
2020-03-01 20:02:32,676 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/OctoPrintComponents.qml:25:16: Unable to assign [undefined] to QQmlComponent*
2020-03-01 20:02:32,677 - DEBUG - [MainThread] MaterialSettingsPlugin.MaterialSettingsPlugin._onEngineCreated [64]: Replacing Materials preferencepane with patched version
2020-03-01 20:02:32,685 - DEBUG - [MainThread] UM.Controller.setActiveStage [149]: Setting active stage to PrepareStage
2020-03-01 20:02:32,754 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-01 20:02:32,823 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-01 20:02:32,828 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-01 20:02:32,831 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/plugins/plugins/PrepareStage/PrepareMain.qml:16:5: QML ActionPanelWidget: Binding loop detected for property "width"
2020-03-01 20:02:32,834 - DEBUG - [MainThread] UM.Controller.setActiveView [91]: Setting active view to SolidView
2020-03-01 20:02:32,846 - DEBUG - [MainThread] SliceInfoPlugin.SliceInfo._createDialog [71]: Creating dialog [MoreInfoWindow.qml]
2020-03-01 20:02:32,862 - DEBUG - [MainThread] ModelChecker.ModelChecker._createView [109]: Creating model checker view.
2020-03-01 20:02:32,867 - DEBUG - [MainThread] ModelChecker.ModelChecker._createView [118]: Model checker view created.
2020-03-01 20:02:32,869 - DEBUG - [MainThread] Toolbox.src.Toolbox._makeRequestByType [536]: Requesting [updates] metadata from server.
2020-03-01 20:02:32,873 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.getAccessToken [114]: No auth data to retrieve the access_token from
2020-03-01 20:02:32,876 - WARNING - [MainThread] UM.Logger.warning [117]: Cannot add authorization to Cloud Api request
2020-03-01 20:02:33,059 - DEBUG - [MainThread] cura.CuraApplication.run [809]: Booting Cura took 8.971477031707764 seconds
2020-03-01 20:02:33,386 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._processRequest [308]: Request [7ad0331e5b1a4786a9f3681a6715049e] started
2020-03-01 20:02:33,388 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-01 20:02:33,389 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [741]: Set OctoPrint camera url to http://192.168.2.156:80/webcam/?action=stream
2020-03-01 20:02:33,397 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-01 20:02:33,412 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-01 20:02:33,421 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-01 20:02:33,429 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-01 20:02:33,437 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-01 20:02:33,446 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-01 20:02:33,454 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-01 20:02:33,462 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-01 20:02:33,470 - INFO - [MainThread] FirmwareUpdateChecker.FirmwareUpdateChecker.checkFirmwareVersion [74]: No machine with name Monoprice Select Mini V2 (E3D) in list of firmware to check.
2020-03-01 20:02:33,486 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-01 20:02:33,499 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [63]: Updating QualityProfilesDropDownMenuModel.
2020-03-01 20:02:34,131 - DEBUG - [MainThread] UM.Qt.QtRenderer._initialize [188]: Support for Vertex Array Objects: True
2020-03-01 20:02:34,137 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [111]: Initialized OpenGL subsystems.
2020-03-01 20:02:34,139 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [112]: OpenGL Version:  4.1 INTEL-14.4.23
2020-03-01 20:02:34,142 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [113]: OpenGL Vendor:   Intel Inc.
2020-03-01 20:02:34,144 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [114]: OpenGL Renderer: Intel(R) Iris(TM) Plus Graphics 655
2020-03-01 20:02:34,146 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [115]: GLSL Version:    4.10.0
2020-03-01 20:02:34,148 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/default.shader]...
2020-03-01 20:02:34,156 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/selection.shader]...
2020-03-01 20:02:34,161 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/select_face.shader]...
2020-03-01 20:02:34,168 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/default.shader]...
2020-03-01 20:02:34,173 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/composite.shader]...
2020-03-01 20:02:34,182 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/overhang.shader]...
2020-03-01 20:02:34,191 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/striped.shader]...
2020-03-01 20:02:34,197 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/transparent_object.shader]...
2020-03-01 20:02:34,203 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/striped.shader]...
2020-03-01 20:02:34,209 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/default.shader]...
2020-03-01 20:02:34,214 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/grid.shader]...
2020-03-01 20:02:34,220 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/platform.shader]...
2020-03-01 20:02:34,803 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-01 20:02:34,811 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [63]: Updating QualityProfilesDropDownMenuModel.
2020-03-01 20:02:35,366 - INFO - [MainThread] cura.Machines.MachineErrorChecker._setResult [187]: Error check finished, result = False, time = 4.8s
2020-03-01 20:02:35,535 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestFinished [369]: Request [7ad0331e5b1a4786a9f3681a6715049e] finished.
2020-03-01 20:02:35,539 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-01 20:02:36,718 - DEBUG - [Thread-3] cura.Machines.ContainerTree.__getitem__ [106]: Adding container tree for monoprice_select_mini_v2 took 0.6311490535736084 seconds.
2020-03-01 20:02:43,964 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-03-01 20:02:59,718 - INFO - [Thread-4] STLReader.STLReader.load_file [51]: Using NumPy-STL to load STL data.
2020-03-01 20:02:59,728 - DEBUG - [Thread-4] UM.Mesh.MeshData.calculateNormalsFromVertices [495]: Calculating normals took 0.0017230510711669922 seconds
2020-03-01 20:02:59,728 - DEBUG - [Thread-4] STLReader.STLReader._read [102]: Loaded a mesh with 6636 vertices
2020-03-01 20:02:59,746 - DEBUG - [Thread-4] UM.Mesh.MeshData.approximateConvexHull [452]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.01306915283203125 seconds. 129 input vertices. 129 output vertices.
2020-03-01 20:02:59,758 - DEBUG - [Thread-4] UM.FileHandler.ReadFileJob.run [71]: Loading file took 0.0 seconds
2020-03-01 20:02:59,772 - DEBUG - [Thread-4] UM.Mesh.MeshData.approximateConvexHull [452]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.00715184211730957 seconds. 129 input vertices. 129 output vertices.
2020-03-01 20:02:59,857 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: <UM.Operations.AddSceneNodeOperation.AddSceneNodeOperation object at 0x6000167b4958>, took 22ms
2020-03-01 20:02:59,864 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/transparent_object.shader]...
2020-03-01 20:03:06,680 - INFO - [MainThread] cura.UI.MachineActionManager.addDefaultMachineActions [56]: Default machine actions have been added for machine definition [wanhao_i3plus], do nothing.
2020-03-01 20:03:06,891 - INFO - [MainThread] cura.Settings.GlobalStack.addExtruder [184]: Extruder[wanhao_i3plus_extruder_0 #2] added to [Wanhao Duplicator i3 Plus] at position [0]
2020-03-01 20:03:06,894 - WARNING - [MainThread] cura.Settings.ExtruderManager.registerExtruder [156]: Extruder [wanhao_i3plus_extruder_0 #2] has already been registered on machine [Wanhao Duplicator i3 Plus], not doing anything
2020-03-01 20:03:06,897 - INFO - [MainThread] UM.Logger.info [112]: Initializing Active Machine...
2020-03-01 20:03:07,174 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-01 20:03:07,177 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [303]: Connection with instance OrangeLeader with url http://192.168.2.162:80/ started
2020-03-01 20:03:07,189 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/SettingsMenu.qml:51: TypeError: Cannot read property 'isEnabled' of undefined
2020-03-01 20:03:07,191 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/SettingsMenu.qml:44: TypeError: Cannot read property 'isEnabled' of undefined
2020-03-01 20:03:07,195 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/MaterialMenu.qml:26: TypeError: Cannot read property 'isEnabled' of undefined
2020-03-01 20:03:07,198 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/MaterialMenu.qml:28: TypeError: Cannot read property 'material' of undefined
2020-03-01 20:03:07,202 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-01 20:03:07,265 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-01 20:03:07,277 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-01 20:03:07,284 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-01 20:03:07,616 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device OrangeLeader already added
2020-03-01 20:03:07,800 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [135]: New error check scheduled.
2020-03-01 20:03:08,368 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-01 20:03:08,380 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [63]: Updating QualityProfilesDropDownMenuModel.
2020-03-01 20:03:08,632 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [225]: Starting to slice...
2020-03-01 20:03:08,632 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [243]: Going to slice build plate [0]!
2020-03-01 20:03:08,863 - INFO - [MainThread] cura.Machines.MachineErrorChecker._setResult [187]: Error check finished, result = False, time = 1.1s
2020-03-01 20:03:08,926 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [741]: Set OctoPrint camera url to http://192.168.2.162:80/webcam/?action=stream
2020-03-01 20:03:08,948 - WARNING - [Thread-6] UM.Decorators.deprecated_function [20]: <function GlobalStack.extruders at 0x600004034408> is deprecated (since 4.4): Please use extruderList instead.
2020-03-01 20:03:09,239 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onStartSliceCompleted [429]: Sending slice message took 0.6072189807891846 seconds
2020-03-01 20:03:09,322 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING]  -s speed_support_interface="40.0" -s small_hole_max_size="0" -s wireframe_bottom_delay="0" -s jerk_support_interface="20" -s adhesion_z_offset="0" -s speed_equalize_flow_enabled="False" -s jerk_layer_0="20" -s wireframe_printspeed_bottom="5" -s extruder_prime_pos_y="0" -s raft_jerk="20" -s material_print_temperature="210" -s travel_compensate_overlapping_walls_enabled="True" -s sub_div_rad_add="0.4" -s layer_0_z_overlap="0.15" -s support_interface_skip_height="0.3" -s support_initial_layer_line_distance="2.6666666666666665" -s material_bed_temp_wait="True" -s roofing_line_width="0.4" -s support_conical_angle="30" -s default_material_bed_temperature="60" -s retraction_retract_speed="25" -s support_pattern="lines" -s support_infill_extruder_nr="0" -s support_roof_offset="0.0" -s bridge_skin_support_threshold="50" -s retraction_count_max="90" -s speed_support_bottom="40.0" -s machine_filament_park_distance="16" -s machine_steps_per_mm_x="50" -s mold_roof_height="0.5" -s magic_spiralize="False" -s machine_nozzle_cool_down_speed="2.0" -s center_object="False" -s relative_extrusion="False" -s wall_0_inset="0" -s skin_angles="[ ]" -s skirt_line_count="4" -s infill_sparse_thickness="0.1" -s prime_tower_brim_enable="False" -s raft_surface_line_spacing="0.4" -s retract_at_layer_change="False" -s outer_inset_first="False" -s skin_preshrink="0.8" -s material_linear_advance_factor_infill="0" -s machine_name="Wanhao Duplicator i3 Plus" -s optimize_wall_printing_order="False" -s clean_between_layers="False" -s jerk_support_bottom="20" -s support_bottom_height="1" -s material_final_print_temperature="195" -s wall_0_material_flow="100" -s infill_sparse_density="20" -s infill_extruder_nr="-1" -s prime_tower_enable="False" -s machine_max_feedrate_x="299792458000" -s acceleration_support_roof="3000" -s prime_tower_min_volume="6" -s support_interface_offset="0.0" -s support_tree_enable="False" -s raft_surface_speed="30.0" -s raft_base_jerk="20" -s wall_x_extruder_nr="-1" -s switch_extruder_prime_speed="20" -s material_print_temperature_layer_0="210" -s material_guid="" -s support_bottom_extruder_nr="0" -s machine_minimum_feedrate="0.0" -s machine_endstop_positive_direction_y="False" -s wireframe_top_delay="0" -s machine_max_feedrate_z="299792458000" -s raft_fan_speed="0" -s support_type="buildplate" -s skin_edge_support_layers="0" -s support_bottom_stair_step_height="0.3" -s gradual_infill_step_height="1.5" -s support_interface_height="1" -s cutting_mesh="False" -s machine_max_jerk_xy="20.0" -s alternate_carve_order="True" -s roofing_material_flow="100" -s draft_shield_dist="10" -s ironing_pattern="zigzag" -s raft_interface_thickness="0.15000000000000002" -s wireframe_flow="100" -s prime_tower_line_width="0.4" -s zig_zaggify_infill="False" -s support_tower_diameter="3.0" -s jerk_wall_0="20" -s retraction_hop="1" -s platform_adhesion="0" -s machine_max_feedrate_y="299792458000" -s acceleration_support="3000" -s speed_support="60" -s raft_interface_fan_speed="0" -s infill_offset_x="0" -s speed_layer_0="30.0" -s ooze_shield_enabled="False" -s support_line_width="0.4" -s material_linear_advance_factor_support="0" -s machine_depth="200" -s draft_shield_enabled="False" -s support_skip_some_zags="False" -s machine_height="180" -s travel_retract_before_outer_wall="False" -s adaptive_layer_height_threshold="0.2" -s bridge_wall_material_flow="50" -s cool_min_layer_time_fan_speed_max="10" -s speed_wall_x="60.0" -s bridge_fan_speed="100" -s support_material_flow="100" -s acceleration_layer_0="3000" -s cool_fan_speed="100.0" -s support_bottom_angles="[ ]" -s adhesion_z_offset_extensive_processing="False" -s speed_ironing="20.0" -s magic_fuzzy_skin_point_density="1.25" -s wall_0_extruder_nr="-1" -s top_bottom_pattern_0="lines" -s machine_heated_build_volume="False" -s raft_surface_line_width="0.4" -s adaptive_layer_height_variation="0.1" -s cross_infill_density_image="" -s material_break_retracted_position="-50" -s material_initial_print_temperature="200" -s machine_max_jerk_z="0.4" -s support_tree_angle="40" -s support_interface_extruder_nr="0" -s nozzle_disallowed_areas="[]" -s support_tower_maximum_supported_diameter="3.0" -s machine_steps_per_mm_z="50" -s acceleration_infill="3000" -s travel_avoid_supports="False" -s layer_start_y="0.0" -s build_volume_temperature="28" -s extruder_prime_pos_x="0" -s speed_wall="30.0" -s support_xy_distance="0.7" -s infill_enable_travel_optimization="False" -s bridge_wall_coast="100" -s gradual_support_infill_steps="0" -s material_anti_ooze_retraction_speed="5" -s support_conical_enabled="False" -s ironing_line_spacing="0.1" -s draft_shield_height="10" -s z_seam_x="100.0" -s retraction_combing_max_distance="0" -s retraction_min_travel="0.8" -s material_linear_advance_factor_wall_0="0" -s wall_0_wipe_dist="0.2" -s wireframe_roof_drag_along="0.8" -s material_break_preparation_speed="2" -s material_end_of_filament_purge_length="20" -s acceleration_support_bottom="3000" -s support_mesh_drop_down="True" -s wireframe_flow_flat="100" -s speed_print_layer_0="30.0" -s machine_firmware_retract="False" -s switch_extruder_retraction_speeds="20" -s top_layers="8" -s wireframe_straight_before_down="20" -s speed_equalize_flow_max="150" -s alternate_extra_perimeter="False" -s support_roof_enable="True" -s machine_nozzle_head_distance="3" -s support_brim_width="8.0" -s support_enable="False" -s material_no_load_move_factor="0.940860215" -s wall_min_flow="0" -s ironing_flow="10.0" -s support_infill_sparse_thickness="0.1" -s material_bed_temperature_layer_0="64" -s wireframe_up_half_speed="0.3" -s raft_surface_acceleration="3000" -s material_standby_temperature="150" -s brim_outside_only="True" -s acceleration_ironing="3000" -s prime_tower_flow="100" -s top_skin_expand_distance="0.8" -s jerk_print="20" -s retraction_extra_prime_amount="0" -s support_extruder_nr_layer_0="0" -s meshfix_maximum_travel_resolution="0.8" -s wipe_pause="0" -s wipe_retraction_prime_speed="25" -s infill_support_enabled="False" -s cool_fan_speed_0="0" -s support_brim_line_count="20" -s blackmagic="0" -s skin_no_small_gaps_heuristic="False" -s infill_support_angle="40" -s wireframe_printspeed_down="5" -s material_print_temp_prepend="True" -s xy_offset="0" -s draft_shield_height_limitation="full" -s wireframe_printspeed_flat="5" -s wireframe_printspeed="5" -s support_tree_branch_diameter="2" -s machine_steps_per_mm_y="50" -s support_roof_pattern="concentric" -s support_mesh="False" -s material_crystallinity="False" -s support_bottom_distance="0" -s machine_steps_per_mm_e="1600" -s wall_thickness="0.8" -s raft_base_line_spacing="1.6" -s max_extrusion_before_wipe="10" -s speed_support_infill="60" -s support_roof_material_flow="100" -s infill_multiplier="1" -s z_seam_corner="z_seam_corner_inner" -s machine_head_with_fans_polygon="[[-20, 10], [10, 10], [10, -10], [10, -10]]" -s adhesion_extruder_nr="0" -s mold_width="5" -s retraction_combing="all" -s material_flow_layer_0="100" -s wall_material_flow="100" -s raft_speed="30.0" -s mold_angle="40" -s print_temperature="210" -s infill_mesh="False" -s layer_height="0.1" -s material_break_preparation_retracted_position="-16" -s skirt_brim_material_flow="100" -s bridge_skin_speed="15.0" -s support_brim_enable="False" -s cool_fan_full_at_height="0.3" -s jerk_wall="20" -s dual="0" -s support_bottom_enable="False" -s material_print_temp_wait="True" -s support_roof_angles="[ ]" -s line_width="0.4" -s wireframe_roof_fall_down="2" -s machine_gcode_flavor="RepRap (Marlin/Sprinter)" -s wireframe_strategy="compensate" -s cool_fan_speed_min="100.0" -s wipe_move_distance="20" -s bridge_fan_speed_3="0" -s wireframe_roof_outer_delay="0.2" -s ironing_inset="0.2" -s xy_offset_layer_0="0" -s spaghetti_infill_extra_volume="0" -s adaptive_layer_height_enabled="False" -s support_connect_zigzags="True" -s support_interface_enable="False" -s bridge_skin_density_3="80" -s expand_skins_expand_distance="0.8" -s prime_tower_position_y="175.6" -s mesh_position_x="0" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s speed_z_hop="10" -s retraction_hop_enabled="False" -s switch_extruder_retraction_speed="20" -s acceleration_roofing="3000" -s minimum_support_area="0.0" -s wireframe_enabled="False" -s material_linear_advance_factor_topbottom="0" -s raft_surface_thickness="0.1" -s material_linear_advance_factor_wall="0" -s coasting_min_volume="0.8" -s wipe_brush_pos_x="100" -s acceleration_travel_layer_0="5000.0" -s machine_nozzle_id="unknown" -s wipe_retraction_amount="6.5" -s material_break_temperature="50" -s top_bottom_extruder_nr="-1" -s bridge_skin_density="100" -s raft_base_line_width="0.8" -s support_roof_extruder_nr="0" -s acceleration_enabled="False" -s wipe_hop_amount="1" -s support_join_distance="2.0" -s machine_buildplate_type="glass" -s time="20:03:09" -s material_surface_energy="100" -s gantry_height="180" -s experimental="0" -s prime_tower_position_x="195.6" -s bridge_wall_min_length="5" -s bottom_skin_preshrink="0.8" -s support_supported_skin_fan_speed="100" -s infill_wall_line_count="0" -s machine_feeder_wheel_diameter="10.0" -s retraction_hop_only_when_collides="False" -s support_bottom_stair_step_width="5.0" -s infill_angles="[ ]" -s minimum_interface_area="1.0" -s raft_airgap="0.3" -s material_flush_purge_speed="0.5" -s acceleration_support_interface="3000" -s spaghetti_max_infill_angle="10" -s bottom_skin_expand_distance="0.8" -s gradual_support_infill_step_height="1" -s wipe_repeat_count="5" -s meshfix_maximum_resolution="0.5" -s raft_interface_jerk="20" -s material_shrinkage_percentage="0" -s machine_nozzle_size="0.4" -s cross_support_density_image="" -s z_seam_relative="False" -s wireframe_height="3" -s smooth_spiralized_contours="True" -s machine_max_acceleration_z="100" -s support_wall_count="0" -s skin_edge_support_thickness="0" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s support_conical_min_width="5.0" -s raft_surface_jerk="20" -s adaptive_layer_height_variation_step="0.01" -s wireframe_flat_delay="0.1" -s brim_width="8.0" -s support_interface_angles="[ ]" -s bottom_thickness="0.8" -s meshfix="0" -s acceleration_skirt_brim="3000" -s machine_max_acceleration_y="9000" -s support_zag_skip_count="8" -s fill_outline_gaps="False" -s magic_fuzzy_skin_enabled="False" -s jerk_enabled="False" -s print_sequence="all_at_once" -s skin_overlap="5" -s wireframe_nozzle_clearance="1" -s speed_infill="60" -s jerk_prime_tower="20" -s skin_outline_count="1" -s wireframe_drag_along="0.6" -s raft_base_acceleration="3000" -s wall_extruder_nr="-1" -s acceleration_print="3000" -s material_linear_advance_factor_wall_x="0" -s ooze_shield_angle="60" -s machine_endstop_positive_direction_x="False" -s material_bed_temperature="64" -s speed_roofing="30.0" -s raft_acceleration="3000" -s material="0" -s material_bed_temp_prepend="True" -s infill_before_walls="True" -s raft_interface_line_spacing="1.0" -s machine_nozzle_heat_up_speed="2.0" -s material_flush_purge_length="60" -s bridge_settings_enabled="False" -s wall_line_width_x="0.4" -s jerk_support="20" -s infill_line_distance="4.0" -s minimum_bottom_area="1.0" -s adhesion_type="skirt" -s cool_fan_full_layer="2" -s top_bottom_pattern="lines" -s skirt_brim_line_width="0.4" -s layer_height_0="0.3" -s material_linear_advance_factor_skirt_brim="0" -s jerk_travel="30" -s meshfix_union_all_remove_holes="False" -s flow_rate_max_extrusion_offset="0" -s material_diameter="2.85" -s initial_extruder_nr="0" -s support_top_distance="0.1" -s retraction_hop_after_extruder_switch="True" -s machine_max_acceleration_e="10000" -s limit_support_retractions="True" -s bridge_sparse_infill_max_density="0" -s command_line_settings="0" -s bridge_skin_density_2="75" -s retraction_amount="6.5" -s wipe_retraction_speed="25" -s infill_wipe_dist="0.1" -s slicing_tolerance="middle" -s jerk_skirt_brim="20" -s machine_heat_zone_length="16" -s minimum_roof_area="1.0" -s top_skin_preshrink="0.8" -s bridge_enable_more_layers="True" -s wall_overhang_speed_factor="100" -s jerk_support_infill="20" -s travel_compensate_overlapping_walls_0_enabled="True" -s roofing_angles="[ ]" -s jerk_ironing="20" -s material_break_speed="25" -s speed_wall_0="30.0" -s machine_extruders_share_heater="False" -s cool_lift_head="False" -s infill_line_width="0.4" -s magic_fuzzy_skin_outside_only="False" -s spaghetti_infill_stepped="True" -s machine_max_feedrate_e="299792458000" -s brim_line_count="20" -s support_roof_line_distance="0.4" -s spaghetti_inset="0.2" -s material_linear_advance_factor_support_interface="0" -s wireframe_fall_down="0.5" -s material_flow="100" -s support_offset="0" -s wireframe_printspeed_up="5" -s resolution="0" -s support_interface_line_width="0.4" -s speed_support_roof="40.0" -s support_skip_zag_per_mm="20" -s skin_overlap_mm="0.02" -s small_feature_max_length="0.0" -s wipe_hop_speed="10" -s date="01-03-2020" -s machine_extruder_count="1" -s jerk_support_roof="20" -s bridge_fan_speed_2="0" -s bridge_skin_material_flow_3="110" -s initial_bottom_layers="8" -s support_interface_pattern="concentric" -s min_skin_width_for_expansion="4.898587196589413e-17" -s wall_x_material_flow="100" -s support_bottom_density="100" -s skin_material_flow="100" -s wireframe_top_jump="0.6" -s layer_start_x="0.0" -s machine_min_cool_heat_time_window="50.0" -s machine_endstop_positive_direction_z="True" -s coasting_volume="0.064" -s top_thickness="0.8" -s machine_center_is_zero="False" -s machine_end_gcode="" -s wall_line_width="0.4" -s carve_multiple_volumes="False" -s flow_rate_extrusion_offset_factor="100" -s acceleration_wall_x="3000" -s machine_nozzle_expansion_angle="45" -s extruders_enabled_count="1" -s machine_max_jerk_e="5.0" -s raft_margin="15" -s material_end_of_filament_purge_speed="0.5" -s wall_line_width_0="0.4" -s cross_infill_pocket_size="4.0" -s minimum_polygon_circumference="1.0" -s wall_min_flow_retract="False" -s material_maximum_park_duration="300" -s switch_extruder_retraction_amount="16" -s machine_nozzle_temp_enabled="True" -s skirt_brim_speed="30.0" -s small_feature_speed_factor="50" -s raft_base_thickness="0.36" -s roofing_extruder_nr="-1" -s infill_mesh_order="0" -s support="0" -s spaghetti_infill_enabled="False" -s retraction_speed="25" -s bridge_skin_material_flow="60" -s retraction_enable="True" -s support_line_distance="2.6666666666666665" -s travel_avoid_distance="0.625" -s raft_interface_speed="22.5" -s infill_overlap="10" -s support_interface_material_flow="100" -s raft_smoothing="5" -s speed_topbottom="30.0" -s anti_overhang_mesh="False" -s day="Sun" -s wipe_retraction_enable="True" -s material_linear_advance_factor="0" -s cool_min_layer_time="5" -s support_tree_branch_distance="1" -s acceleration_print_layer_0="3000" -s travel_avoid_other_parts="True" -s bottom_layers="8" -s material_flow_dependent_temperature="False" -s coasting_enable="False" -s support_interface_density="100" -s jerk_travel_layer_0="30.0" -s mold_enabled="False" -s machine_nozzle_tip_outer_diameter="1" -s support_xy_overrides_z="z_overrides_xy" -s min_infill_area="0" -s wall_line_count="2" -s infill_randomize_start_location="False" -s mesh_position_y="0" -s raft_surface_fan_speed="0" -s raft_interface_acceleration="3000" -s support_infill_rate="15" -s speed_print="60" -s conical_overhang_enabled="False" -s speed_travel_layer_0="60.0" -s raft_interface_line_width="0.8" -s wipe_hop_enable="False" -s zig_zaggify_support="False" -s machine_use_extruder_offset_to_offset_coords="True" -s machine_heated_bed="True" -s multiple_mesh_overlap="0.15" -s wipe_retraction_retract_speed="25" -s support_bottom_pattern="concentric" -s material_linear_advance_factor_prime_tower="0" -s retraction_prime_speed="25" -s z_seam_type="sharpest_corner" -s jerk_print_layer_0="20" -s material_anti_ooze_retracted_position="-4" -s wireframe_roof_inset="3" -s retraction_extrusion_window="6.5" -s support_fan_enable="False" -s extruder_prime_pos_abs="False" -s material_adhesion_tendency="10" -s machine_disallowed_areas="[]" -s meshfix_maximum_deviation="0.05" -s prime_blob_enable="False" -s meshfix_keep_open_polygons="False" -s roofing_pattern="lines" -s cooling="0" -s support_infill_angles="[ ]" -s shell="0" -s jerk_roofing="20" -s conical_overhang_angle="50" -s infill_overlap_mm="0.04" -s mesh_position_z="0" -s brim_gap="0" -s acceleration_support_infill="3000" -s support_roof_line_width="0.4" -s travel="0" -s ooze_shield_dist="2" -s max_skin_angle_for_expansion="90" -s machine_acceleration="4000" -s machine_start_gcode="" -s initial_layer_line_width_factor="100.0" -s support_roof_height="1.2" -s roofing_layer_count="0" -s speed_slowdown_layers="2" -s default_material_print_temperature="210" -s filter_out_tiny_gaps="True" -s spaghetti_flow="20" -s magic_fuzzy_skin_point_dist="0.8" -s bridge_skin_speed_3="15.0" -s machine_shape="rectangular" -s switch_extruder_extra_prime_amount="0" -s acceleration_topbottom="3000" -s machine_settings="0" -s ironing_only_highest_layer="False" -s wipe_retraction_extra_prime_amount="0" -s z_seam_position="back" -s raft_surface_layers="2" -s skirt_brim_minimal_length="250" -s jerk_infill="20" -s wireframe_flow_connection="100" -s skirt_gap="3" -s retraction_hop_after_extruder_switch_height="1" -s support_tower_roof_angle="65" -s extruder_prime_pos_z="0" -s acceleration_prime_tower="3000" -s support_bottom_line_width="0.4" -s support_use_towers="True" -s travel_speed="120" -s speed="0" -s cool_min_speed="10" -s cool_fan_speed_max="100.0" -s wall_overhang_angle="90" -s cool_fan_enabled="True" -s jerk_wall_x="20" -s coasting_speed="90" -s speed_prime_tower="60" -s infill="0" -s speed_travel="120" -s support_angle="70" -s raft_base_speed="22.5" -s raft_base_fan_speed="0" -s support_tree_collision_resolution="0.2" -s support_tree_branch_diameter_angle="5" -s material_extrusion_cool_down_speed="0.7" -s travel_compensate_overlapping_walls_x_enabled="True" -s bridge_skin_material_flow_2="100" -s machine_max_acceleration_x="9000" -s z_seam_y="200" -s meshfix_union_all="True" -s support_z_distance="0.1" -s support_bottom_offset="0.0" -s bridge_wall_speed="15.0" -s prime_tower_size="20" -s jerk_topbottom="20" -s remove_empty_first_layers="True" -s gradual_infill_steps="0" -s machine_show_variants="False" -s connect_infill_polygons="False" -s skin_line_width="0.4" -s brim_replaces_support="True" -s spaghetti_max_height="2.0" -s support_roof_density="100" -s top_bottom_thickness="0.8" -s fill_perimeter_gaps="everywhere" -s prime_tower_wipe_enabled="True" -s acceleration_wall_0="3000" -s ironing_enabled="False" -s acceleration_wall="3000" -s acceleration_travel="5000" -s support_bottom_material_flow="100" -s machine_width="200" -s infill_material_flow="100" -s support_bottom_line_distance="0.4" -s magic_mesh_surface_mode="normal" -s print_bed_temperature="64" -s bridge_skin_speed_2="15.0" -s small_feature_speed_factor_0="50" -s support_extruder_nr="0" -s infill_offset_y="0" -s magic_fuzzy_skin_thickness="0.3" -s meshfix_extensive_stitching="False" -s infill_pattern="grid" -s connect_skin_polygons="False" -s material_break_preparation_temperature="210" -s support_xy_distance_overhang="0.2" -e0 -s speed_support_interface="40.0" -s small_hole_max_size="0" -s jerk_support_interface="20" -s infill_sparse_density="20" -s speed_equalize_flow_enabled="False" -s jerk_layer_0="20" -s extruder_prime_pos_y="0" -s raft_jerk="20" -s material_print_temperature="220" -s travel_compensate_overlapping_walls_enabled="True" -s jerk_topbottom="20" -s support_interface_offset="0.0" -s sub_div_rad_add="0.4" -s layer_0_z_overlap="0.15" -s support_interface_skip_height="0.3" -s support_initial_layer_line_distance="2.6666666666666665" -s roofing_line_width="0.4" -s support_conical_angle="30" -s retraction_retract_speed="65" -s support_pattern="lines" -s support_roof_offset="0.0" -s bridge_skin_support_threshold="50" -s retraction_count_max="90" -s speed_support_bottom="40.0" -s machine_extruder_start_pos_abs="False" -s machine_filament_park_distance="16" -s machine_steps_per_mm_x="50" -s mold_roof_height="0.5" -s machine_nozzle_cool_down_speed="2.0" -s center_object="False" -s wall_0_inset="0" -s skin_angles="[ ]" -s skirt_line_count="4" -s machine_endstop_positive_direction_y="False" -s infill_sparse_thickness="0.1" -s raft_surface_line_spacing="0.4" -s retract_at_layer_change="False" -s outer_inset_first="False" -s skin_preshrink="1.6" -s material_linear_advance_factor_infill="0" -s spaghetti_infill_stepped="True" -s optimize_wall_printing_order="False" -s clean_between_layers="False" -s jerk_support_bottom="20" -s support_bottom_height="1" -s material_final_print_temperature="205" -s wall_0_material_flow="100" -s acceleration_support_roof="3000" -s prime_tower_min_volume="6" -s raft_surface_speed="30.0" -s raft_base_jerk="20" -s switch_extruder_prime_speed="20" -s material_print_temperature_layer_0="220" -s material_guid="0ff92885-617b-4144-a03c-9989872454bc" -s initial_bottom_layers="6" -s support_interface_pattern="concentric" -s bridge_skin_material_flow_3="110" -s bridge_fan_speed_2="0" -s support_xy_distance="0.7" -s speed_wall="30.0" -s infill_support_enabled="False" -s support_brim_line_count="20" -s blackmagic="0" -s cool_fan_speed_0="0" -s skin_edge_support_layers="0" -s gradual_infill_step_height="1.5" -s support_interface_height="1" -s machine_steps_per_mm_e="1600" -s wall_thickness="0.8" -s support_bottom_distance="0" -s material_crystallinity="False" -s raft_interface_thickness="0.15000000000000002" -s experimental="0" -s material_maximum_park_duration="300" -s skirt_brim_speed="12" -s machine_nozzle_temp_enabled="True" -s switch_extruder_retraction_amount="16" -s support_roof_pattern="concentric" -s jerk_wall_0="20" -s retraction_hop="1" -s support_offset="0" -s material_flow="100" -s connect_skin_polygons="False" -s infill_pattern="concentric" -s raft_interface_speed="22.5" -s travel_avoid_distance="0.625" -s bridge_wall_speed="15.0" -s support_bottom_offset="0.0" -s support_line_width="0.4" -s support_skip_some_zags="False" -s ironing_enabled="False" -s support_bottom_material_flow="100" -s acceleration_travel="5000" -s acceleration_wall="3000" -s wipe_brush_pos_x="100" -s machine_nozzle_id="unknown" -s acceleration_travel_layer_0="5000.0" -s bridge_skin_density_3="80" -s support_interface_enable="False" -s bridge_wall_material_flow="50" -s machine_nozzle_tip_outer_diameter="1" -s min_infill_area="0" -s support_xy_overrides_z="z_overrides_xy" -s cool_min_layer_time_fan_speed_max="10" -s material_break_temperature="50" -s wipe_retraction_amount="2.5" -s speed_wall_x="60.0" -s bridge_fan_speed="100" -s support_material_flow="100" -s spaghetti_max_infill_angle="10" -s acceleration_support_interface="3000" -s ironing_flow="10.0" -s wall_min_flow="0" -s machine_nozzle_offset_x="0" -s raft_surface_line_width="0.4" -s bridge_skin_material_flow_2="100" -s cross_infill_density_image="" -s material_break_retracted_position="-50" -s material_initial_print_temperature="210" -s support_tree_angle="40" -s support_tower_maximum_supported_diameter="3.0" -s machine_steps_per_mm_z="50" -s acceleration_infill="3000" -s travel_avoid_supports="False" -s zig_zaggify_infill="False" -s layer_start_y="0.0" -s extruder_prime_pos_x="0" -s speed_layer_0="12" -s infill_enable_travel_optimization="False" -s raft_interface_fan_speed="0" -s bridge_wall_coast="100" -s gradual_support_infill_steps="0" -s material_anti_ooze_retraction_speed="5" -s support_conical_enabled="False" -s ironing_line_spacing="0.1" -s z_seam_x="100.0" -s retraction_combing_max_distance="0" -s acceleration_layer_0="3000" -s retraction_min_travel="0.8" -s material_linear_advance_factor_wall_0="0" -s wall_0_wipe_dist="0.2" -s support_tree_branch_diameter="2" -s machine_steps_per_mm_y="50" -s speed_support="60" -s ironing_inset="0.2" -s bridge_fan_speed_3="0" -s material_break_preparation_speed="2" -s material_end_of_filament_purge_length="20" -s acceleration_support_bottom="3000" -s support_tree_collision_resolution="0.2" -s raft_base_fan_speed="0" -s raft_interface_line_spacing="1.0" -s machine_nozzle_heat_up_speed="2.0" -s material_flush_purge_length="60" -s speed_print_layer_0="12" -s switch_extruder_retraction_speeds="20" -s magic_fuzzy_skin_enabled="False" -s top_layers="6" -s speed_equalize_flow_max="150" -s top_bottom_pattern_0="lines" -s alternate_extra_perimeter="False" -s support_roof_enable="True" -s machine_nozzle_head_distance="3" -s support_brim_width="8.0" -s material_no_load_move_factor="0.940860215" -s bridge_sparse_infill_max_density="0" -s raft_surface_acceleration="3000" -s filter_out_tiny_gaps="True" -s bridge_skin_speed_3="15.0" -s magic_fuzzy_skin_point_dist="0.8" -s spaghetti_flow="20" -s material_standby_temperature="175" -s brim_outside_only="True" -s acceleration_ironing="3000" -s prime_tower_flow="100" -s top_skin_expand_distance="1.6" -s jerk_print="20" -s retraction_extra_prime_amount="0" -s meshfix_maximum_travel_resolution="0.8" -s wipe_pause="0" -s wipe_retraction_prime_speed="65" -s skin_no_small_gaps_heuristic="False" -s raft_surface_jerk="20" -s infill_support_angle="40" -s xy_offset="0" -s wipe_retraction_extra_prime_amount="0" -s z_seam_relative="False" -s cross_support_density_image="" -s max_extrusion_before_wipe="10" -s raft_base_line_spacing="1.6" -s speed_support_infill="60" -s support_roof_material_flow="100" -s support_connect_zigzags="True" -s spaghetti_infill_extra_volume="0" -s infill_multiplier="1" -s mold_width="5" -s material_flow_layer_0="100" -s wall_material_flow="100" -s raft_speed="30.0" -s mold_angle="40" -s material_break_preparation_retracted_position="-16" -s skirt_brim_material_flow="100" -s bridge_skin_speed="15.0" -s support_brim_enable="False" -s cool_fan_full_at_height="0.3" -s wipe_hop_speed="10" -s jerk_wall="20" -s dual="0" -s support_bottom_enable="False" -s support_roof_angles="[ ]" -s zig_zaggify_support="False" -s wipe_hop_enable="False" -s line_width="0.4" -s cool_fan_speed_min="80" -s wipe_move_distance="20" -s xy_offset_layer_0="0" -s shell="0" -s support_infill_angles="[ ]" -s expand_skins_expand_distance="1.6" -s mesh_position_x="0" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s support_conical_min_width="5.0" -s speed_z_hop="10" -s retraction_hop_enabled="False" -s switch_extruder_retraction_speed="20" -s acceleration_roofing="3000" -s top_thickness="0.8" -s infill="0" -s speed_prime_tower="60" -s coasting_speed="90" -s minimum_support_area="0.0" -s machine_settings="0" -s acceleration_topbottom="3000" -s material_linear_advance_factor_topbottom="0" -s wipe_hop_amount="1" -s support_join_distance="2.0" -s brim_gap="0" -s acceleration_support_infill="3000" -s infill_wall_line_count="0" -s support_supported_skin_fan_speed="100" -s support_roof_line_width="0.4" -s roofing_layer_count="0" -s default_material_print_temperature="200" -s raft_base_thickness="0.36" -s retraction_hop_after_extruder_switch="True" -s support_top_distance="0.1" -s raft_fan_speed="0" -s magic_mesh_surface_mode="normal" -s z_seam_type="random" -s retraction_prime_speed="65" -s material_linear_advance_factor_prime_tower="0" -s coasting_volume="0.064" -s machine_endstop_positive_direction_z="True" -s small_feature_speed_factor_0="50" -s infill_angles="[ ]" -s minimum_interface_area="1.0" -s gradual_support_infill_step_height="1" -s wipe_repeat_count="5" -s meshfix_maximum_resolution="0.5" -s prime_tower_line_width="0.4" -s brim_line_count="20" -s support_roof_line_distance="0.4" -s infill_line_width="0.4" -s magic_fuzzy_skin_outside_only="False" -s raft_airgap="0.3" -s material_flush_purge_speed="0.5" -s gradual_infill_steps="0" -s bridge_skin_material_flow="60" -s retraction_enable="True" -s support_line_distance="2.6666666666666665" -s ironing_pattern="zigzag" -s support_angle="70" -s raft_base_speed="22.5" -s speed_travel="150" -s brim_width="8.0" -s small_feature_max_length="0.0" -s skin_overlap_mm="0.02" -s material_shrinkage_percentage="0" -s raft_interface_jerk="20" -s support_interface_angles="[ ]" -s bottom_thickness="0.8" -s speed_wall_0="30.0" -s cool_lift_head="False" -s material_break_speed="25" -s support_wall_count="0" -s skin_edge_support_thickness="0" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s support_zag_skip_count="8" -s fill_outline_gaps="False" -s skin_overlap="5" -s speed_infill="60" -s jerk_prime_tower="20" -s skin_outline_count="1" -s acceleration_print="3000" -s material_linear_advance_factor_wall_x="0" -s machine_endstop_positive_direction_x="False" -s layer_start_x="0.0" -s machine_min_cool_heat_time_window="50.0" -s z_seam_corner="z_seam_corner_inner" -s support_bottom_stair_step_height="0.3" -s speed_roofing="30.0" -s raft_acceleration="3000" -s support_z_distance="0.1" -s meshfix_union_all="True" -s material="0" -s infill_before_walls="True" -s max_skin_angle_for_expansion="90" -s wall_line_width_x="0.4" -s jerk_support="20" -s infill_line_distance="2.0" -s minimum_bottom_area="1.0" -s cool_fan_full_layer="2" -s top_bottom_pattern="lines" -s skirt_brim_line_width="0.4" -s meshfix_union_all_remove_holes="False" -s material_diameter="1.75" -s speed_ironing="20.0" -s limit_support_retractions="True" -s material_linear_advance_factor_support="0" -s command_line_settings="0" -s machine_extruder_start_pos_x="0" -s support_tower_diameter="3.0" -s bridge_skin_density_2="75" -s retraction_amount="2.5" -s wipe_retraction_speed="65" -s infill_wipe_dist="0.1" -s machine_extruder_end_pos_y="0" -s slicing_tolerance="exclusive" -s jerk_skirt_brim="20" -s machine_heat_zone_length="16" -s machine_extruder_cooling_fan_number="0" -s minimum_roof_area="1.0" -s top_skin_preshrink="1.6" -s bridge_enable_more_layers="True" -s bridge_skin_density="100" -s raft_base_line_width="0.8" -s machine_nozzle_offset_y="0" -s wall_overhang_speed_factor="100" -s jerk_support_infill="20" -s raft_smoothing="5" -s speed_topbottom="30.0" -s travel_compensate_overlapping_walls_0_enabled="True" -s roofing_angles="[ ]" -s jerk_ironing="20" -s spaghetti_inset="0.2" -s material_linear_advance_factor_support_interface="0" -s machine_feeder_wheel_diameter="10.0" -s retraction_hop_only_when_collides="False" -s resolution="0" -s support_bottom_angles="[ ]" -s support_interface_line_width="0.4" -s speed_support_roof="40.0" -s support_skip_zag_per_mm="20" -s meshfix="0" -s acceleration_skirt_brim="3000" -s material_linear_advance_factor_skirt_brim="0" -s jerk_travel="30" -s connect_infill_polygons="False" -s machine_extruder_start_code="" -s mold_enabled="False" -s jerk_travel_layer_0="30.0" -s min_skin_width_for_expansion="3.67394039744206e-17" -s wall_x_material_flow="100" -s support_bottom_density="100" -s skin_material_flow="100" -s roofing_pattern="lines" -s infill_overlap="14" -s support_interface_material_flow="100" -s extruder_nr="0" -s extruder_prime_pos_abs="False" -s material_adhesion_tendency="0" -s support_tree_branch_distance="1" -s cool_min_speed="10" -s cool_fan_speed_max="80" -s wall_overhang_angle="90" -s cool_fan_enabled="True" -s coasting_min_volume="0.8" -s material_linear_advance_factor_wall="0" -s ironing_only_highest_layer="False" -s switch_extruder_extra_prime_amount="0" -s retraction_speed="65" -s raft_base_acceleration="3000" -s retraction_extrusion_window="2.5" -s machine_extruder_start_pos_y="0" -s support_fan_enable="False" -s wipe_retraction_enable="True" -s material_linear_advance_factor="0" -s cool_min_layer_time="5" -s wall_min_flow_retract="False" -s acceleration_print_layer_0="3000" -s travel_avoid_other_parts="True" -s coasting_enable="False" -s support_interface_density="100" -s bottom_layers="6" -s material_flow_dependent_temperature="False" -s infill_offset_x="0" -s raft_interface_line_width="0.8" -s material_surface_energy="100" -s acceleration_support="3000" -s support="0" -s spaghetti_infill_enabled="False" -s retraction_hop_after_extruder_switch_height="1" -s machine_extruder_end_pos_abs="False" -s infill_randomize_start_location="False" -s mesh_position_y="0" -s raft_surface_fan_speed="0" -s raft_interface_acceleration="3000" -s magic_fuzzy_skin_point_density="1.25" -s wall_line_count="4" -s support_infill_rate="15" -s speed_print="60" -s conical_overhang_enabled="False" -s speed_travel_layer_0="30.0" -s platform_adhesion="0" -s support_bottom_stair_step_width="5.0" -s multiple_mesh_overlap="0.15" -s wipe_retraction_retract_speed="65" -s support_bottom_pattern="concentric" -s infill_offset_y="0" -s magic_fuzzy_skin_thickness="0.3" -s meshfix_extensive_stitching="False" -s top_bottom_thickness="0.8" -s machine_extruder_end_code="" -s meshfix_maximum_deviation="0.05" -s prime_blob_enable="False" -s meshfix_keep_open_polygons="False" -s jerk_print_layer_0="20" -s material_anti_ooze_retracted_position="-4" -s support_use_towers="True" -s support_bottom_line_width="0.4" -s material_break_preparation_temperature="220" -s support_xy_distance_overhang="0.2" -s jerk_roofing="20" -s speed="0" -s machine_nozzle_size="0.4" -s cooling="0" -s jerk_support_roof="20" -s machine_extruder_end_pos_x="0" -s travel="0" -s initial_layer_line_width_factor="100.0" -s support_roof_height="1.2" -s support_infill_sparse_thickness="0.1" -s z_seam_position="back" -s raft_surface_layers="2" -s skirt_brim_minimal_length="250" -s jerk_infill="20" -s skirt_gap="3" -s support_tower_roof_angle="65" -s extruder_prime_pos_z="0" -s acceleration_prime_tower="3000" -s jerk_wall_x="20" -s cross_infill_pocket_size="2.0" -s wall_line_width_0="0.4" -s raft_margin="15" -s material_end_of_filament_purge_speed="0.5" -s skin_line_width="0.4" -s bottom_skin_expand_distance="1.6" -s z_seam_y="200" -s support_tree_branch_diameter_angle="5" -s material_extrusion_cool_down_speed="0.7" -s travel_compensate_overlapping_walls_x_enabled="True" -s brim_replaces_support="True" -s acceleration_wall_0="3000" -s bridge_skin_speed_2="15.0" -s small_feature_speed_factor="50" -s bottom_skin_preshrink="1.6" -s spaghetti_max_height="2.0" -s support_roof_density="100" -s fill_perimeter_gaps="everywhere" -s prime_tower_wipe_enabled="True" -s conical_overhang_angle="50" -s infill_overlap_mm="0" -s mesh_position_z="0" -s cool_fan_speed="80" -s raft_surface_thickness="0.1" -s wall_line_width="0.4" -s acceleration_wall_x="3000" -s infill_material_flow="100" -s support_bottom_line_distance="0.4" -s roofing_material_flow="100" -g -e0 -l "0" -s extruder_nr="0"
2020-03-01 20:03:10,620 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 147 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-01 20:03:10,864 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-01 20:03:10,867 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-01 20:03:10,878 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [663]: Slicing took 2.2464001178741455 seconds
2020-03-01 20:03:10,879 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [664]: Number of models per buildplate: {0: 1}
2020-03-01 20:03:10,879 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [678]: See if there is more to slice...
2020-03-01 20:03:11,090 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [181]: Socket state changed to Closing
2020-03-01 20:03:11,094 - DEBUG - [MainThread] UM.Backend.Backend._onSocketError [203]: Socket debug: Arcus Error (13): Closing socket because other side requested close.
2020-03-01 20:03:11,098 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [183]: Socket state changed to Closed
2020-03-01 20:03:11,098 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onBackendQuit [829]: Backend quit with return code 0. Resetting process and socket.
2020-03-01 20:03:16,964 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-03-01 20:05:11,798 - DEBUG - [MainThread] LinearAdvanceSettingPlugin.LinearAdvanceSettingPlugin._filterGcode [109]: No used extruders specify a linear advance factor
2020-03-01 20:05:12,264 - DEBUG - [MainThread] UM.Controller.setActiveStage [149]: Setting active stage to MonitorStage
2020-03-01 20:05:12,451 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:211: Error: Cannot assign [undefined] to QString
2020-03-01 20:05:12,508 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._processRequest [308]: Request [cf918860069e46908e80857071b45185] started
2020-03-01 20:05:12,515 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-01 20:05:13,401 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestFinished [369]: Request [cf918860069e46908e80857071b45185] finished.
2020-03-01 20:05:13,407 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-01 20:05:13,408 - INFO - [MainThread] SliceInfoPlugin.SliceInfo._onRequestFinished [275]: SliceInfo sent successfully
2020-03-01 20:05:13,941 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-03-01 20:05:43,989 - DEBUG - [MainThread] UM.Message._onInactivityTriggered [88]: Hiding message because of inactivity
2020-03-01 20:06:01,803 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [772]: Resource created on OctoPrint instance: http://192.168.2.162/api/files/local/WDI3P_screw_box_top.gcode
2020-03-01 20:06:31,966 - DEBUG - [MainThread] UM.Message._onInactivityTriggered [88]: Hiding message because of inactivity
2020-03-01 21:17:34,038 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Blue Leader"._octoprint._tcp.local
2020-03-01 21:17:34,042 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Orange Leader"._octoprint._tcp.local
2020-03-01 21:17:34,044 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Darth Pooky"._octoprint._tcp.local
2020-03-01 22:32:43,461 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Orange Leader"._octoprint._tcp.local
2020-03-01 22:32:43,470 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Blue Leader"._octoprint._tcp.local
2020-03-01 22:32:43,471 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Darth Pooky"._octoprint._tcp.local
2020-03-01 23:47:55,654 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Blue Leader"._octoprint._tcp.local
2020-03-01 23:47:55,660 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Orange Leader"._octoprint._tcp.local
2020-03-01 23:47:55,661 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Darth Pooky"._octoprint._tcp.local
2020-03-02 01:03:12,775 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Blue Leader"._octoprint._tcp.local
2020-03-02 01:03:12,785 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Orange Leader"._octoprint._tcp.local
2020-03-02 01:03:12,787 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Darth Pooky"._octoprint._tcp.local
2020-03-02 02:18:30,503 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Blue Leader"._octoprint._tcp.local
2020-03-02 02:18:30,509 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Orange Leader"._octoprint._tcp.local
2020-03-02 02:18:30,511 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Darth Pooky"._octoprint._tcp.local
2020-03-02 03:33:55,621 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Darth Pooky"._octoprint._tcp.local
2020-03-02 03:33:55,627 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Blue Leader"._octoprint._tcp.local
2020-03-02 03:33:55,628 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Orange Leader"._octoprint._tcp.local
2020-03-02 04:48:57,379 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Orange Leader"._octoprint._tcp.local
2020-03-02 04:48:57,384 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Darth Pooky"._octoprint._tcp.local
2020-03-02 04:48:57,386 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Blue Leader"._octoprint._tcp.local
2020-03-02 06:04:08,658 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Blue Leader"._octoprint._tcp.local
2020-03-02 06:04:08,663 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Darth Pooky"._octoprint._tcp.local
2020-03-02 06:04:08,665 - DEBUG - [zeroconf-ServiceBrowser__octoprint._tcp.local.] OctoPrintPlugin.OctoPrintOutputDevicePlugin._onServiceChanged [215]: Bonjour service added: "Orange Leader"._octoprint._tcp.local
2020-03-02 06:37:25,887 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevicePlugin._keepDiscoveryAlive [112]: Zeroconf discovery has died, restarting discovery of OctoPrint instances.
2020-03-02 06:37:25,892 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.disconnect [315]: Connection with instance OrangeLeader with url http://192.168.2.162:80/ stopped
2020-03-02 06:37:25,969 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-02 06:37:25,980 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device OrangeLeader already added
2020-03-02 06:37:25,983 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [303]: Connection with instance OrangeLeader with url http://192.168.2.162:80/ started
2020-03-02 07:39:28,599 - DEBUG - [MainThread] cura.TaskManagement.OnExitCallbackManager.triggerNextCallback [51]: No more on-app-exit callbacks to process. Tell the app to exit.
2020-03-02 07:39:28,609 - INFO - [MainThread] cura.CuraApplication.closeApplication [592]: Close application
2020-03-02 07:39:28,625 - DEBUG - [MainThread] UM.Qt.QtApplication.windowClosed [462]: Shutting down cura
2020-03-02 07:39:28,794 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._terminate [292]: Attempting to kill the engine process
2020-03-07 20:51:28,362 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin FileLogger
2020-03-07 20:51:28,375 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin LegacyProfileReader
2020-03-07 20:51:28,390 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin AMFReader
2020-03-07 20:51:28,401 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin SimpleView
2020-03-07 20:51:28,411 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin SolidView
2020-03-07 20:51:28,425 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin FirmwareUpdateChecker
2020-03-07 20:51:28,434 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin SentryLogger
2020-03-07 20:51:28,442 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin SupportEraser
2020-03-07 20:51:28,451 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin PrepareStage
2020-03-07 20:51:28,534 - WARNING - [MainThread] UM.PluginRegistry.loadPlugin [412]: Plugin [CuraInventorPlugin] with supported sdk versions [['5.0.0', '6.0.0', '6.1.0', '5.0.0']] is incompatible with the current sdk version [7.1.0].
2020-03-07 20:51:28,543 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin LinearAdvanceSettingPlugin
2020-03-07 20:51:28,549 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin VersionInTitlebarPlugin
2020-03-07 20:51:28,556 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin OrientationPlugin
2020-03-07 20:51:28,575 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin OctoPrintPlugin
2020-03-07 20:51:28,583 - DEBUG - [MainThread] SidebarGUIPlugin.__matchVersion [48]: This version of the plugin is not compatible with this version of Cura. Please check for an update.
2020-03-07 20:51:28,583 - WARNING - [MainThread] SidebarGUIPlugin.register [23]: Plugin not loaded because of a version mismatch
2020-03-07 20:51:28,587 - WARNING - [MainThread] UM.PluginRegistry.loadPlugin [419]: Plugin SidebarGUIPlugin did not return any objects to register
2020-03-07 20:51:28,596 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin MeshTools
2020-03-07 20:51:28,603 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin ZOffsetPlugin
2020-03-07 20:51:28,610 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin CustomSupports
2020-03-07 20:51:28,618 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin MaterialSettingsPlugin
2020-03-07 20:51:28,621 - DEBUG - [MainThread] UM.PluginRegistry.loadPlugins [369]: Loading all plugins took 1.2215678691864014 seconds
2020-03-07 20:51:28,629 - INFO - [MainThread] UM.VersionUpgradeManager.upgrade [148]: Looking for old configuration files to upgrade.
2020-03-07 20:51:28,731 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-07 20:51:28,735 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-07 20:51:28,739 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-07 20:51:28,742 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-07 20:51:28,745 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-07 20:51:28,748 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-07 20:51:28,752 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-07 20:51:28,755 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-07 20:51:28,758 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-07 20:51:28,761 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-07 20:51:28,764 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-07 20:51:28,768 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-07 20:51:28,771 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-07 20:51:28,866 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ../3D4MakersFacilanC8/3d4makers_facilan_c8.xml.fdm_material, skip it
2020-03-07 20:51:32,731 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.loadAllMetadata [330]: Loading metadata into container registry took 3.688732862472534 seconds
2020-03-07 20:51:32,903 - DEBUG - [MainThread] cura.Scene.CuraSceneController.setActiveBuildPlate [111]: Select build plate: 0
2020-03-07 20:51:32,907 - INFO - [MainThread] cura.CuraApplication.run [761]: Initializing machine error checker
2020-03-07 20:51:32,978 - INFO - [MainThread] cura.UI.MachineActionManager.addDefaultMachineActions [72]: Default machine actions added for machine definition [wanhao_i3plus]
2020-03-07 20:51:33,272 - WARNING - [MainThread] LocalContainerProvider.LocalContainerProvider._saveCachedDefinition [271]: The definition cache for definition fdmprinter failed to pickle.
2020-03-07 20:51:33,500 - INFO - [MainThread] cura.Settings.GlobalStack.addExtruder [184]: Extruder[wanhao_i3plus_extruder_0 #2] added to [Wanhao Duplicator i3 Plus] at position [0]
2020-03-07 20:51:33,503 - WARNING - [MainThread] cura.Settings.ExtruderManager.registerExtruder [156]: Extruder [wanhao_i3plus_extruder_0 #2] has already been registered on machine [Wanhao Duplicator i3 Plus], not doing anything
2020-03-07 20:51:33,505 - INFO - [MainThread] FirmwareUpdateChecker.FirmwareUpdateChecker.checkFirmwareVersion [74]: No machine with name Wanhao Duplicator i3 Plus in list of firmware to check.
2020-03-07 20:51:33,632 - DEBUG - [MainThread] cura.Machines.ContainerTree.__getitem__ [106]: Adding container tree for wanhao_i3plus took 0.12283706665039062 seconds.
2020-03-07 20:51:33,636 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: BQ_PauseAtHeight
2020-03-07 20:51:33,637 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: ChangeAtZ
2020-03-07 20:51:33,639 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: ColorMix
2020-03-07 20:51:33,640 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: DisplayFilenameAndLayerOnLCD
2020-03-07 20:51:33,641 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: DisplayRemainingTimeOnLCD
2020-03-07 20:51:33,641 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: FilamentChange
2020-03-07 20:51:33,642 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: InsertAtLayerChange
2020-03-07 20:51:33,643 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: PauseAtHeight
2020-03-07 20:51:33,644 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: PauseAtHeightRepRapFirmwareDuet
2020-03-07 20:51:33,645 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: PauseAtHeightforRepetier
2020-03-07 20:51:33,646 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: RetractContinue
2020-03-07 20:51:33,646 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: SearchAndReplace
2020-03-07 20:51:33,647 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: Stretch
2020-03-07 20:51:33,648 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: TimeLapse
2020-03-07 20:51:33,649 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: UsePreviousProbeMeasurements
2020-03-07 20:51:33,768 - INFO - [MainThread] cura.CuraApplication.run [766]: Initializing machine manager
2020-03-07 20:51:33,771 - INFO - [MainThread] cura.CuraApplication.run [771]: Initializing container manager
2020-03-07 20:51:33,873 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-07 20:51:33,886 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [303]: Connection with instance OrangeLeader with url http://192.168.2.162:80/ started
2020-03-07 20:51:33,953 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [135]: New error check scheduled.
2020-03-07 20:51:33,980 - DEBUG - [MainThread] UM.Scene.Camera._preferencesChanged [246]: Changing perspective mode to perspective.
2020-03-07 20:51:34,393 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [158]: Loading theme file: /Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/themes/cura-dark/theme.json
2020-03-07 20:51:34,396 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [158]: Loading theme file: /Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/themes/cura-light/theme.json
2020-03-07 20:51:34,604 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [231]: Loaded theme /Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/themes/cura-light
2020-03-07 20:51:34,607 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [231]: Loaded theme /Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/themes/cura-dark
2020-03-07 20:51:35,013 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin._createView [304]: Creating post processing plugin view.
2020-03-07 20:51:35,256 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin._createView [314]: Post processing view created.
2020-03-07 20:51:35,502 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._parseJWT [91]: There was no auth data or access token
2020-03-07 20:51:35,505 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._parseJWT [91]: There was no auth data or access token
2020-03-07 20:51:35,508 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._parseJWT [91]: There was no auth data or access token
2020-03-07 20:51:35,511 - WARNING - [MainThread] UM.Qt.Bindings.Theme.getImage [133]: No image header_pattern defined in Theme
2020-03-07 20:51:36,002 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-07 20:51:36,005 - WARNING - [MainThread] UM.Decorators.deprecated_function [20]: <function GlobalStack.extruders at 0x60000513c918> is deprecated (since 4.4): Please use extruderList instead.
2020-03-07 20:51:36,137 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:125:27: Unable to assign [undefined] to int
2020-03-07 20:51:36,139 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:76:29: Unable to assign null to double
2020-03-07 20:51:36,149 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._createAdditionalComponentsView [350]: Creating additional ui components for OctoPrint-connected printers.
2020-03-07 20:51:36,156 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/Resources/qml/QtQuick/Controls/Button.qml:99: TypeError: Cannot read property of null
2020-03-07 20:51:36,159 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/OctoPrintComponents.qml:25:16: Unable to assign [undefined] to QQmlComponent*
2020-03-07 20:51:36,160 - DEBUG - [MainThread] MaterialSettingsPlugin.MaterialSettingsPlugin._onEngineCreated [64]: Replacing Materials preferencepane with patched version
2020-03-07 20:51:36,168 - DEBUG - [MainThread] UM.Controller.setActiveStage [149]: Setting active stage to PrepareStage
2020-03-07 20:51:36,247 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-07 20:51:36,319 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-07 20:51:36,323 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-07 20:51:36,326 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/plugins/plugins/PrepareStage/PrepareMain.qml:16:5: QML ActionPanelWidget: Binding loop detected for property "width"
2020-03-07 20:51:36,329 - DEBUG - [MainThread] UM.Controller.setActiveView [91]: Setting active view to SolidView
2020-03-07 20:51:36,333 - DEBUG - [MainThread] SliceInfoPlugin.SliceInfo._createDialog [71]: Creating dialog [MoreInfoWindow.qml]
2020-03-07 20:51:36,348 - DEBUG - [MainThread] ModelChecker.ModelChecker._createView [109]: Creating model checker view.
2020-03-07 20:51:36,354 - DEBUG - [MainThread] ModelChecker.ModelChecker._createView [118]: Model checker view created.
2020-03-07 20:51:36,356 - DEBUG - [MainThread] Toolbox.src.Toolbox._makeRequestByType [536]: Requesting [updates] metadata from server.
2020-03-07 20:51:36,360 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.getAccessToken [114]: No auth data to retrieve the access_token from
2020-03-07 20:51:36,363 - WARNING - [MainThread] UM.Logger.warning [117]: Cannot add authorization to Cloud Api request
2020-03-07 20:51:36,562 - DEBUG - [MainThread] cura.CuraApplication.run [809]: Booting Cura took 9.60240912437439 seconds
2020-03-07 20:51:36,923 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._processRequest [308]: Request [dda50758da07491aa9cdc980ae24bba7] started
2020-03-07 20:51:36,926 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-07 20:51:36,928 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-07 20:51:36,948 - INFO - [MainThread] FirmwareUpdateChecker.FirmwareUpdateChecker.checkFirmwareVersion [74]: No machine with name Monoprice Select Mini V2 (E3D) in list of firmware to check.
2020-03-07 20:51:36,952 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-07 20:51:36,960 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-07 20:51:36,968 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-07 20:51:36,976 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-07 20:51:36,983 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-07 20:51:36,991 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-07 20:51:37,000 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-07 20:51:37,024 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-07 20:51:37,038 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [63]: Updating QualityProfilesDropDownMenuModel.
2020-03-07 20:51:38,327 - DEBUG - [Thread-3] cura.Machines.ContainerTree.__getitem__ [106]: Adding container tree for monoprice_select_mini_v2 took 0.7413899898529053 seconds.
2020-03-07 20:51:38,443 - DEBUG - [MainThread] UM.Qt.QtRenderer._initialize [188]: Support for Vertex Array Objects: True
2020-03-07 20:51:38,448 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [111]: Initialized OpenGL subsystems.
2020-03-07 20:51:38,451 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [112]: OpenGL Version:  4.1 INTEL-14.4.23
2020-03-07 20:51:38,453 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [113]: OpenGL Vendor:   Intel Inc.
2020-03-07 20:51:38,455 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [114]: OpenGL Renderer: Intel(R) Iris(TM) Plus Graphics 655
2020-03-07 20:51:38,457 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [115]: GLSL Version:    4.10.0
2020-03-07 20:51:38,460 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/default.shader]...
2020-03-07 20:51:38,471 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/selection.shader]...
2020-03-07 20:51:38,476 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/select_face.shader]...
2020-03-07 20:51:38,483 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/default.shader]...
2020-03-07 20:51:38,488 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/composite.shader]...
2020-03-07 20:51:38,496 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/overhang.shader]...
2020-03-07 20:51:38,506 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/striped.shader]...
2020-03-07 20:51:38,513 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/transparent_object.shader]...
2020-03-07 20:51:38,518 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/striped.shader]...
2020-03-07 20:51:38,524 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/default.shader]...
2020-03-07 20:51:38,530 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/grid.shader]...
2020-03-07 20:51:38,535 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/platform.shader]...
2020-03-07 20:51:38,703 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-07 20:51:38,715 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [63]: Updating QualityProfilesDropDownMenuModel.
2020-03-07 20:51:39,174 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestFinished [369]: Request [dda50758da07491aa9cdc980ae24bba7] finished.
2020-03-07 20:51:39,177 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-07 20:51:39,646 - INFO - [MainThread] cura.Machines.MachineErrorChecker._setResult [187]: Error check finished, result = False, time = 5.7s
2020-03-07 20:51:49,474 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-03-07 20:57:33,605 - INFO - [Thread-4] STLReader.STLReader.load_file [51]: Using NumPy-STL to load STL data.
2020-03-07 20:57:34,217 - DEBUG - [Thread-4] UM.Mesh.MeshData.calculateNormalsFromVertices [495]: Calculating normals took 0.002995014190673828 seconds
2020-03-07 20:57:34,236 - DEBUG - [Thread-4] STLReader.STLReader._read [102]: Loaded a mesh with 35922 vertices
2020-03-07 20:57:34,294 - DEBUG - [Thread-4] UM.Mesh.MeshData.approximateConvexHull [452]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.03439688682556152 seconds. 154 input vertices. 154 output vertices.
2020-03-07 20:57:34,319 - DEBUG - [Thread-4] UM.FileHandler.ReadFileJob.run [71]: Loading file took 0.7 seconds
2020-03-07 20:57:34,359 - DEBUG - [Thread-4] UM.Mesh.MeshData.approximateConvexHull [452]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.03232693672180176 seconds. 154 input vertices. 154 output vertices.
2020-03-07 20:57:34,478 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: <UM.Operations.AddSceneNodeOperation.AddSceneNodeOperation object at 0x60001769d818>, took 14ms
2020-03-07 20:57:34,490 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/transparent_object.shader]...
2020-03-07 20:57:38,265 - INFO - [MainThread] cura.UI.MachineActionManager.addDefaultMachineActions [56]: Default machine actions have been added for machine definition [wanhao_i3plus], do nothing.
2020-03-07 20:57:38,582 - INFO - [MainThread] cura.Settings.GlobalStack.addExtruder [184]: Extruder[wanhao_i3plus_extruder_0 #5] added to [RedLeader] at position [0]
2020-03-07 20:57:38,586 - WARNING - [MainThread] cura.Settings.ExtruderManager.registerExtruder [156]: Extruder [wanhao_i3plus_extruder_0 #5] has already been registered on machine [RedLeader], not doing anything
2020-03-07 20:57:38,592 - INFO - [MainThread] UM.Logger.info [112]: Initializing Active Machine...
2020-03-07 20:57:38,983 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-07 20:57:38,988 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [303]: Connection with instance BlueLeader with url http://192.168.2.140:80/ started
2020-03-07 20:57:39,016 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/SettingsMenu.qml:51: TypeError: Cannot read property 'isEnabled' of undefined
2020-03-07 20:57:39,020 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/SettingsMenu.qml:44: TypeError: Cannot read property 'isEnabled' of undefined
2020-03-07 20:57:39,026 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/MaterialMenu.qml:26: TypeError: Cannot read property 'isEnabled' of undefined
2020-03-07 20:57:39,029 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/MaterialMenu.qml:28: TypeError: Cannot read property 'material' of undefined
2020-03-07 20:57:39,035 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-07 20:57:39,147 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-07 20:57:39,167 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-07 20:57:39,177 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-07 20:57:39,424 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [135]: New error check scheduled.
2020-03-07 20:57:40,647 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-07 20:57:40,659 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [63]: Updating QualityProfilesDropDownMenuModel.
2020-03-07 20:57:41,301 - INFO - [MainThread] cura.Machines.MachineErrorChecker._setResult [187]: Error check finished, result = False, time = 1.9s
2020-03-07 20:57:49,476 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-03-07 20:57:52,120 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/Resources/qml/UM/Dialog.qml:86:13: QML Loader: Binding loop detected for property "active"
2020-03-07 20:57:52,672 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [215]: Trying to access OctoPrint instance at http://192.168.2.140:80/ with the provided API key.
2020-03-07 20:58:06,398 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.disconnect [315]: Connection with instance BlueLeader with url http://192.168.2.140:80/ stopped
2020-03-07 20:58:06,407 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/DiscoverOctoPrintAction.qml:522: TypeError: Cannot call method 'getId' of undefined
2020-03-07 20:58:06,412 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-07 20:58:06,415 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device BlueLeader already added
2020-03-07 20:58:06,416 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [303]: Connection with instance BlueLeader with url http://192.168.2.1715003:80/ started
2020-03-07 20:58:06,950 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [215]: Trying to access OctoPrint instance at http://192.168.2.1715003:80/ with the provided API key.
2020-03-07 20:58:16,479 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-03-07 20:58:17,119 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.disconnect [315]: Connection with instance BlueLeader with url http://192.168.2.1715003:80/ stopped
2020-03-07 20:58:17,125 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/DiscoverOctoPrintAction.qml:522: TypeError: Cannot call method 'getId' of undefined
2020-03-07 20:58:17,130 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-07 20:58:17,134 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device BlueLeader already added
2020-03-07 20:58:17,135 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [303]: Connection with instance BlueLeader with url http://192.168.2.171:5003/ started
2020-03-07 20:58:17,184 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device BlueLeader already added
2020-03-07 20:58:17,365 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 20:58:17,675 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [215]: Trying to access OctoPrint instance at http://192.168.2.171:5003/ with the provided API key.
2020-03-07 20:58:23,501 - WARNING - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [371]: Start polling for AppKeys decision
2020-03-07 20:58:27,475 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-03-07 20:58:27,511 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 20:58:38,649 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 20:58:39,239 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [396]: AppKey granted
2020-03-07 20:58:47,506 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 20:58:51,489 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [225]: Starting to slice...
2020-03-07 20:58:51,489 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [243]: Going to slice build plate [0]!
2020-03-07 20:58:51,497 - WARNING - [Thread-6] UM.Decorators.deprecated_function [20]: <function GlobalStack.extruders at 0x60000513c918> is deprecated (since 4.4): Please use extruderList instead.
2020-03-07 20:58:51,802 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onStartSliceCompleted [429]: Sending slice message took 0.31244707107543945 seconds
2020-03-07 20:58:52,045 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING]  -s machine_name="Wanhao Duplicator i3 Plus" -s cool_min_layer_time="5" -s material_linear_advance_factor="0" -s wireframe_flat_delay="0.1" -s machine_heat_zone_length="16" -s support_infill_rate="15" -s top_skin_preshrink="0.8" -s skin_preshrink="0.8" -s machine_nozzle_size="0.4" -s mold_roof_height="0.5" -s support_skip_some_zags="False" -s prime_tower_brim_enable="False" -s material_linear_advance_factor_infill="0" -s command_line_settings="0" -s z_seam_position="back" -s retraction_min_travel="0.8" -s max_skin_angle_for_expansion="90" -s mesh_position_y="0" -s machine_acceleration="4000" -s retraction_extra_prime_amount="0" -s draft_shield_dist="10" -s bridge_skin_density_2="75" -s coasting_speed="90" -s bottom_skin_preshrink="0.8" -s travel_compensate_overlapping_walls_x_enabled="True" -s wall_material_flow="100" -s retraction_combing="all" -s material_flow_layer_0="100" -s skin_no_small_gaps_heuristic="False" -s minimum_interface_area="1.0" -s support_interface_angles="[ ]" -s machine_depth="200" -s brim_replaces_support="True" -s sub_div_rad_add="0.4" -s raft_base_jerk="20" -s machine_max_feedrate_z="299792458000" -s meshfix_union_all_remove_holes="False" -s support_roof_material_flow="100" -s magic_spiralize="False" -s initial_extruder_nr="0" -s jerk_support_interface="20" -s raft_airgap="0.3" -s wall_min_flow_retract="False" -s mold_enabled="False" -s adaptive_layer_height_variation_step="0.01" -s raft_surface_jerk="20" -s travel_avoid_other_parts="True" -s retraction_speed="25" -s acceleration_wall_0="3000" -s jerk_support_bottom="20" -s support_extruder_nr="0" -s infill_offset_x="0" -s outer_inset_first="False" -s gradual_infill_step_height="1.5" -s machine_shape="rectangular" -s support_tower_diameter="3.0" -s prime_tower_min_volume="6" -s bridge_skin_material_flow="60" -s raft_fan_speed="0" -s ooze_shield_dist="2" -s small_hole_max_size="0" -s support_tower_roof_angle="65" -s extruder_prime_pos_z="0" -s raft_surface_thickness="0.1" -s magic_fuzzy_skin_enabled="False" -s material_break_speed="25" -s alternate_carve_order="True" -s support_use_towers="True" -s support_bottom_angles="[ ]" -s machine_feeder_wheel_diameter="10.0" -s ironing_pattern="zigzag" -s support_bottom_stair_step_height="0.3" -s machine_start_gcode="" -s initial_layer_line_width_factor="100.0" -s retraction_combing_max_distance="0" -s draft_shield_height="10" -s z_seam_x="100.0" -s conical_overhang_enabled="False" -s jerk_wall="20" -s support_roof_offset="0.0" -s raft_interface_acceleration="3000" -s spaghetti_max_height="2.0" -s prime_tower_wipe_enabled="True" -s xy_offset_layer_0="0" -s machine_minimum_feedrate="0.0" -s minimum_bottom_area="1.0" -s infill_line_distance="4.0" -s support_bottom_line_distance="0.4" -s skin_angles="[ ]" -s retraction_count_max="90" -s retract_at_layer_change="False" -s support_conical_angle="30" -s brim_width="8.0" -s spaghetti_infill_enabled="False" -s support="0" -s infill_mesh_order="0" -s optimize_wall_printing_order="False" -s machine_nozzle_cool_down_speed="2.0" -s wireframe_up_half_speed="0.3" -s material_linear_advance_factor_support="0" -s support_join_distance="2.0" -s wipe_hop_amount="1" -s wipe_hop_speed="10" -s acceleration_infill="3000" -s travel_avoid_supports="False" -s center_object="False" -s speed_layer_0="30.0" -s meshfix_union_all="True" -s support_z_distance="0.1" -s jerk_print_layer_0="20" -s wireframe_roof_inset="3" -s material_anti_ooze_retracted_position="-4" -s skin_edge_support_thickness="0" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s machine_max_acceleration_z="100" -s support_wall_count="0" -s acceleration_support_interface="3000" -s spaghetti_max_infill_angle="10" -s raft_jerk="20" -s raft_surface_line_width="0.4" -s travel_compensate_overlapping_walls_enabled="True" -s support_tree_branch_diameter="2" -s machine_steps_per_mm_y="50" -s wireframe_printspeed="5" -s speed_prime_tower="60" -s adhesion_type="skirt" -s ironing_only_highest_layer="False" -s support_mesh_drop_down="True" -s min_infill_area="0" -s machine_nozzle_tip_outer_diameter="1" -s support_xy_overrides_z="z_overrides_xy" -s material_bed_temperature="63" -s support_xy_distance_overhang="0.2" -s wireframe_printspeed_up="5" -s resolution="0" -s skin_line_width="0.4" -s acceleration_layer_0="3000" -s machine_max_jerk_z="0.4" -s support_tree_angle="40" -s speed_wall="30.0" -s support_xy_distance="0.7" -s day="Sat" -s wipe_retraction_enable="True" -s material_print_temp_prepend="True" -s wireframe_printspeed_down="5" -s material_flush_purge_speed="0.5" -s bridge_skin_speed_2="15.0" -s machine_endstop_positive_direction_z="True" -s coasting_volume="0.064" -s raft_surface_layers="2" -s skirt_brim_minimal_length="250" -s expand_skins_expand_distance="0.8" -s prime_tower_position_y="175.584" -s mesh_position_x="0" -s print_temperature="210" -s raft_surface_acceleration="3000" -s speed_topbottom="30.0" -s raft_smoothing="5" -s material_anti_ooze_retraction_speed="5" -s support_conical_enabled="False" -s machine_endstop_positive_direction_y="False" -s wireframe_top_delay="0" -s max_extrusion_before_wipe="10" -s raft_base_line_spacing="1.6" -s speed_support_infill="60" -s conical_overhang_angle="50" -s mesh_position_z="0" -s infill_overlap_mm="0.04" -s smooth_spiralized_contours="True" -s carve_multiple_volumes="False" -s acceleration_wall_x="3000" -s flow_rate_extrusion_offset_factor="100" -s cool_fan_speed_min="100.0" -s wipe_move_distance="20" -s wireframe_roof_outer_delay="0.2" -s bridge_fan_speed_3="0" -s ironing_inset="0.2" -s skirt_brim_material_flow="100" -s bridge_skin_speed="15.0" -s support_roof_angles="[ ]" -s material_print_temp_wait="True" -s speed_travel_layer_0="60.0" -s jerk_layer_0="20" -s switch_extruder_extra_prime_amount="0" -s speed_wall_x="60.0" -s time="20:58:51" -s machine_buildplate_type="glass" -s wireframe_height="3" -s cross_support_density_image="" -s z_seam_relative="False" -s skirt_brim_line_width="0.4" -s top_bottom_pattern="lines" -s cool_fan_full_layer="2" -s z_seam_y="200" -s acceleration_support="3000" -s support_bottom_line_width="0.4" -s cool_min_layer_time_fan_speed_max="10" -s bridge_skin_support_threshold="50" -s support_roof_density="100" -s acceleration_roofing="3000" -s retraction_hop_enabled="False" -s switch_extruder_retraction_speed="20" -s minimum_support_area="0.0" -s wireframe_flow_connection="100" -s machine_settings="0" -s acceleration_topbottom="3000" -s wipe_retraction_prime_speed="25" -s wipe_pause="0" -s machine_min_cool_heat_time_window="50.0" -s layer_start_x="0.0" -s infill_randomize_start_location="False" -s gradual_infill_steps="0" -s machine_show_variants="False" -s print_sequence="all_at_once" -s skin_overlap="5" -s support_interface_offset="0.0" -s support_tree_enable="False" -s infill_wipe_dist="0.1" -s wall_0_extruder_nr="-1" -s support_brim_line_count="20" -s cool_fan_speed_0="0" -s infill_support_enabled="False" -s blackmagic="0" -s machine_max_feedrate_x="299792458000" -s machine_width="200" -s draft_shield_height_limitation="full" -s wireframe_printspeed_flat="5" -s anti_overhang_mesh="False" -s support_bottom_density="100" -s skin_material_flow="100" -s material="0" -s material_bed_temp_prepend="True" -s infill_before_walls="True" -s shell="0" -s support_infill_angles="[ ]" -s support_interface_enable="False" -s bridge_skin_density_3="80" -s bridge_wall_material_flow="50" -s top_layers="8" -s acceleration_skirt_brim="3000" -s meshfix="0" -s date="07-03-2020" -s machine_extruder_count="1" -s jerk_support_roof="20" -s material_break_preparation_retracted_position="-16" -s infill_mesh="False" -s layer_height="0.1" -s raft_interface_line_spacing="1.0" -s material_flush_purge_length="60" -s machine_nozzle_heat_up_speed="2.0" -s wall_thickness="0.8" -s machine_steps_per_mm_e="1600" -s support_bottom_distance="0" -s material_crystallinity="False" -s infill="0" -s support_infill_extruder_nr="0" -s spaghetti_flow="20" -s filter_out_tiny_gaps="True" -s bridge_skin_speed_3="15.0" -s magic_fuzzy_skin_point_dist="0.8" -s support_tower_maximum_supported_diameter="3.0" -s support_interface_extruder_nr="0" -s nozzle_disallowed_areas="[]" -s machine_heated_build_volume="False" -s extruder_prime_pos_y="0" -s adaptive_layer_height_enabled="False" -s spaghetti_infill_extra_volume="0" -s support_connect_zigzags="True" -s support_roof_line_distance="0.4" -s brim_line_count="12" -s material_guid="" -s fill_perimeter_gaps="everywhere" -s wireframe_strategy="compensate" -s wireframe_roof_fall_down="2" -s machine_gcode_flavor="RepRap (Marlin/Sprinter)" -s speed_print_layer_0="30.0" -s wireframe_flow_flat="100" -s support_supported_skin_fan_speed="100" -s infill_wall_line_count="0" -s small_feature_speed_factor="50" -s support_roof_pattern="concentric" -s support_mesh="False" -s bottom_skin_expand_distance="0.8" -s wall_overhang_speed_factor="100" -s jerk_support_infill="20" -s support_interface_height="1" -s ironing_line_spacing="0.1" -s machine_max_feedrate_y="299792458000" -s adhesion_z_offset_extensive_processing="False" -s machine_firmware_retract="False" -s switch_extruder_retraction_speeds="20" -s infill_overlap="10" -s support_interface_material_flow="100" -s infill_angles="[ ]" -s draft_shield_enabled="False" -s connect_skin_polygons="False" -s infill_pattern="grid" -s roofing_pattern="lines" -s support_bottom_material_flow="100" -s acceleration_wall="3000" -s ironing_enabled="False" -s acceleration_travel="5000" -s gradual_support_infill_steps="0" -s jerk_infill="20" -s wall_0_wipe_dist="0.2" -s material_linear_advance_factor_wall_0="0" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s platform_adhesion="0" -s support_bottom_stair_step_width="5.0" -s bridge_sparse_infill_max_density="0" -s top_bottom_pattern_0="lines" -s alternate_extra_perimeter="False" -s support_roof_enable="True" -s machine_steps_per_mm_x="50" -s ooze_shield_enabled="False" -s support_line_width="0.4" -s wireframe_straight_before_down="20" -s acceleration_support_roof="3000" -s raft_interface_speed="22.5" -s travel_avoid_distance="0.625" -s small_feature_speed_factor_0="50" -s material_break_retracted_position="-50" -s material_initial_print_temperature="200" -s ooze_shield_angle="60" -s machine_endstop_positive_direction_x="False" -s material_final_print_temperature="195" -s acceleration_print="3000" -s material_linear_advance_factor_wall_x="0" -s machine_steps_per_mm_z="50" -s speed_support_bottom="20.0" -s material_extrusion_cool_down_speed="0.7" -s switch_extruder_retraction_amount="16" -s material_maximum_park_duration="300" -s machine_nozzle_temp_enabled="True" -s skirt_brim_speed="30.0" -s infill_support_angle="40" -s material_flow="100" -s support_offset="0" -s wireframe_fall_down="0.5" -s speed_equalize_flow_max="150" -s jerk_wall_x="20" -s bridge_skin_material_flow_2="100" -s speed_support_interface="40.0" -s machine_max_acceleration_x="9000" -s extruders_enabled_count="1" -s machine_end_gcode="" -s machine_center_is_zero="False" -s speed_travel="120" -s support_angle="70" -s raft_base_speed="22.5" -s layer_0_z_overlap="0.15" -s retraction_hop="1" -s jerk_wall_0="20" -s support_roof_extruder_nr="0" -s acceleration_enabled="False" -s top_bottom_thickness="0.8" -s slicing_tolerance="middle" -s jerk_skirt_brim="20" -s jerk_print="20" -s wall_extruder_nr="-1" -s raft_base_acceleration="3000" -s retraction_extrusion_window="6.5" -s support_fan_enable="False" -s bridge_wall_coast="100" -s raft_interface_fan_speed="0" -s remove_empty_first_layers="True" -s jerk_topbottom="20" -s prime_blob_enable="False" -s meshfix_keep_open_polygons="False" -s wireframe_roof_drag_along="0.8" -s acceleration_support_bottom="3000" -s material_end_of_filament_purge_length="20" -s material_break_preparation_speed="2" -s machine_heated_bed="True" -s machine_use_extruder_offset_to_offset_coords="True" -s top_skin_expand_distance="0.8" -s acceleration_ironing="3000" -s prime_tower_flow="100" -s speed_infill="60" -s wireframe_nozzle_clearance="1" -s bridge_wall_min_length="5" -s experimental="0" -s prime_tower_position_x="195.584" -s clean_between_layers="False" -s wireframe_drag_along="0.6" -s meshfix_maximum_deviation="0.05" -s gradual_support_infill_step_height="1" -s retraction_prime_speed="25" -s z_seam_type="sharpest_corner" -s material_linear_advance_factor_prime_tower="0" -s print_bed_temperature="63" -s magic_mesh_surface_mode="normal" -s acceleration_prime_tower="3000" -s retraction_hop_after_extruder_switch_height="1" -s skirt_gap="3" -s roofing_extruder_nr="-1" -s jerk_support="20" -s wall_line_width_x="0.4" -s raft_base_thickness="0.36" -s retraction_hop_after_extruder_switch="True" -s support_top_distance="0.1" -s travel="0" -s raft_interface_line_width="0.8" -s gantry_height="180" -s material_surface_energy="100" -s speed_print="60" -s support_enable="False" -s adaptive_layer_height_threshold="0.2" -s minimum_polygon_circumference="1.0" -s material_print_temperature="210" -s wall_x_extruder_nr="-1" -s switch_extruder_prime_speed="20" -s material_linear_advance_factor_support_interface="0" -s infill_multiplier="1" -s relative_extrusion="False" -s wall_0_inset="0" -s material_flow_dependent_temperature="False" -s bottom_layers="8" -s infill_offset_y="0" -s magic_fuzzy_skin_thickness="0.3" -s meshfix_extensive_stitching="False" -s machine_nozzle_id="unknown" -s wipe_brush_pos_x="100" -s acceleration_travel_layer_0="5000.0" -s support_zag_skip_count="8" -s fill_outline_gaps="False" -s machine_filament_park_distance="16" -s support_bottom_height="1" -s raft_acceleration="3000" -s support_skip_zag_per_mm="20" -s support_interface_line_width="0.4" -s speed_support_roof="20.0" -s support_tree_branch_distance="1" -s meshfix_maximum_resolution="0.5" -s wipe_repeat_count="5" -s wall_x_material_flow="100" -s min_skin_width_for_expansion="4.898587196589413e-17" -s machine_height="180" -s travel_retract_before_outer_wall="False" -s infill_enable_travel_optimization="False" -s raft_surface_speed="30.0" -s machine_max_acceleration_y="9000" -s raft_interface_jerk="20" -s material_shrinkage_percentage="0" -s raft_surface_fan_speed="0" -s machine_max_feedrate_e="299792458000" -s spaghetti_infill_stepped="True" -s cool_lift_head="False" -s speed_wall_0="30.0" -s machine_extruders_share_heater="False" -s skin_outline_count="1" -s jerk_prime_tower="20" -s support_conical_min_width="5.0" -s minimum_roof_area="1.0" -s roofing_line_width="0.4" -s bridge_fan_speed_2="0" -s bridge_skin_material_flow_3="110" -s support_interface_pattern="concentric" -s initial_bottom_layers="8" -s support_extruder_nr_layer_0="0" -s meshfix_maximum_travel_resolution="0.8" -s cool_fan_full_at_height="0.3" -s support_brim_enable="False" -s acceleration_print_layer_0="3000" -s bridge_fan_speed="100" -s support_material_flow="100" -s top_thickness="0.8" -s wall_line_width_0="0.4" -s cross_infill_pocket_size="4.0" -s material_end_of_filament_purge_speed="0.5" -s machine_max_jerk_e="5.0" -s raft_margin="15" -s jerk_travel="30" -s layer_height_0="0.3" -s material_linear_advance_factor_skirt_brim="0" -s brim_outside_only="True" -s material_standby_temperature="150" -s speed_roofing="30.0" -s jerk_travel_layer_0="30.0" -s skin_edge_support_layers="0" -s support_type="buildplate" -s spaghetti_inset="0.2" -s support_bottom_extruder_nr="0" -s machine_nozzle_expansion_angle="45" -s speed_z_hop="10" -s material_bed_temp_wait="True" -s wipe_hop_enable="False" -s zig_zaggify_support="False" -s jerk_roofing="20" -s bridge_skin_density="100" -s raft_base_line_width="0.8" -s small_feature_max_length="0.0" -s skin_overlap_mm="0.02" -s bottom_thickness="0.8" -s wireframe_printspeed_bottom="5" -s travel_compensate_overlapping_walls_0_enabled="True" -s mold_angle="40" -s raft_speed="30.0" -s material_no_load_move_factor="0.940860215" -s raft_surface_line_spacing="0.4" -s roofing_material_flow="100" -s wipe_retraction_extra_prime_amount="0" -s xy_offset="0" -s wall_line_width="0.4" -s cool_fan_speed="100.0" -s prime_tower_enable="False" -s material_linear_advance_factor_wall="0" -s coasting_min_volume="0.8" -s cool_min_speed="10" -s speed_support="60" -s adhesion_z_offset="0" -s infill_extruder_nr="-1" -s infill_sparse_density="20" -s machine_disallowed_areas="[]" -s infill_sparse_thickness="0.1" -s extruder_prime_pos_abs="False" -s material_adhesion_tendency="10" -s wireframe_top_jump="0.6" -s wall_0_material_flow="100" -s support_interface_skip_height="0.3" -s adhesion_extruder_nr="0" -s mold_width="5" -s acceleration_support_infill="3000" -s brim_gap="0" -s material_break_preparation_temperature="210" -s ironing_flow="10.0" -s wall_min_flow="0" -s jerk_enabled="False" -s speed_ironing="20.0" -s limit_support_retractions="True" -s machine_max_acceleration_e="10000" -s bridge_enable_more_layers="True" -s line_width="0.4" -s wireframe_bottom_delay="0" -s raft_interface_thickness="0.15000000000000002" -s support_bottom_pattern="concentric" -s multiple_mesh_overlap="0.15" -s wipe_retraction_retract_speed="25" -s support_pattern="lines" -s skirt_line_count="4" -s support_line_distance="2.6666666666666665" -s retraction_enable="True" -s support_infill_sparse_thickness="0.1" -s material_bed_temperature_layer_0="63" -s wall_line_count="2" -s magic_fuzzy_skin_point_density="1.25" -s support_bottom_enable="False" -s dual="0" -s support_roof_line_width="0.4" -s default_material_bed_temperature="60" -s support_interface_density="100" -s coasting_enable="False" -s retraction_hop_only_when_collides="False" -s cool_fan_speed_max="100.0" -s cool_fan_enabled="True" -s wall_overhang_angle="90" -s raft_base_fan_speed="0" -s support_tree_collision_resolution="0.2" -s support_tree_branch_diameter_angle="5" -s speed_equalize_flow_enabled="False" -s support_brim_width="8.0" -s machine_nozzle_head_distance="3" -s cutting_mesh="False" -s machine_max_jerk_xy="20.0" -s travel_speed="120" -s speed="0" -s prime_tower_size="20" -s wipe_retraction_amount="6.5" -s material_break_temperature="50" -s top_bottom_extruder_nr="-1" -s cooling="0" -s material_print_temperature_layer_0="210" -s bridge_settings_enabled="False" -s infill_line_width="0.4" -s magic_fuzzy_skin_outside_only="False" -s prime_tower_line_width="0.4" -s material_diameter="2.85" -s flow_rate_max_extrusion_offset="0" -s machine_head_with_fans_polygon="[[-20, 10], [10, 10], [10, -10], [-20, -10]]" -s z_seam_corner="z_seam_corner_inner" -s retraction_amount="6.5" -s wipe_retraction_speed="25" -s bridge_wall_speed="15.0" -s support_bottom_offset="0.0" -s support_initial_layer_line_distance="2.6666666666666665" -s layer_start_y="0.0" -s build_volume_temperature="28" -s extruder_prime_pos_x="0" -s zig_zaggify_infill="False" -s retraction_retract_speed="25" -s support_roof_height="1.2" -s infill_material_flow="100" -s material_linear_advance_factor_topbottom="0" -s wireframe_enabled="False" -s cross_infill_density_image="" -s adaptive_layer_height_variation="0.1" -s roofing_angles="[ ]" -s jerk_ironing="20" -s wireframe_flow="100" -s connect_infill_polygons="False" -s speed_slowdown_layers="2" -s default_material_print_temperature="210" -s roofing_layer_count="0" -e0 -s cool_min_layer_time="5" -s material_linear_advance_factor="0" -s machine_heat_zone_length="16" -s support_infill_rate="15" -s top_skin_preshrink="1.6" -s skin_preshrink="1.6" -s support_tower_maximum_supported_diameter="3.0" -s machine_nozzle_size="0.4" -s mold_roof_height="0.5" -s support_skip_some_zags="False" -s material_linear_advance_factor_topbottom="0" -s material_linear_advance_factor_infill="0" -s speed_infill="30" -s command_line_settings="0" -s z_seam_position="back" -s retraction_min_travel="0.8" -s max_skin_angle_for_expansion="90" -s mesh_position_y="0" -s infill_offset_y="0" -s retraction_extra_prime_amount="0" -s machine_nozzle_offset_x="0" -s bridge_skin_density_2="75" -s coasting_speed="90" -s bottom_skin_preshrink="1.6" -s travel_compensate_overlapping_walls_x_enabled="True" -s wall_material_flow="100" -s material_flow_layer_0="100" -s skin_no_small_gaps_heuristic="False" -s cross_infill_density_image="" -s minimum_interface_area="1.0" -s support_interface_angles="[ ]" -s brim_replaces_support="True" -s sub_div_rad_add="0.4" -s raft_base_jerk="20" -s meshfix_union_all_remove_holes="False" -s support_roof_material_flow="100" -s jerk_support_interface="20" -s raft_airgap="0.3" -s spaghetti_infill_enabled="False" -s support="0" -s wall_min_flow_retract="False" -s mold_enabled="False" -s raft_surface_jerk="20" -s travel_avoid_other_parts="True" -s retraction_speed="65" -s acceleration_wall_0="3000" -s jerk_support_bottom="20" -s infill_offset_x="0" -s outer_inset_first="False" -s material_break_preparation_retracted_position="-16" -s prime_tower_min_volume="6" -s magic_fuzzy_skin_enabled="False" -s material_break_speed="25" -s machine_nozzle_tip_outer_diameter="1" -s support_xy_overrides_z="z_overrides_xy" -s min_infill_area="0" -s support_use_towers="True" -s jerk_wall_0="20" -s retraction_hop="1" -s support_connect_zigzags="True" -s spaghetti_infill_extra_volume="0" -s infill_line_distance="4.0" -s minimum_bottom_area="1.0" -s retraction_combing_max_distance="0" -s z_seam_x="100.0" -s cross_infill_pocket_size="4.0" -s wall_line_width_0="0.4" -s support_tree_branch_diameter="2" -s machine_steps_per_mm_y="50" -s jerk_wall="20" -s bottom_layers="6" -s material_flow_dependent_temperature="False" -s support_bottom_line_distance="0.4" -s support_wall_count="0" -s skin_edge_support_thickness="0" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s blackmagic="0" -s cool_fan_speed_0="0" -s infill_support_enabled="False" -s support_brim_line_count="20" -s wipe_pause="0" -s wipe_retraction_prime_speed="65" -s wall_min_flow="0" -s ironing_flow="10.0" -s support_conical_angle="30" -s material_break_temperature="50" -s wipe_retraction_amount="2.5" -s material_linear_advance_factor_support="0" -s wipe_hop_speed="10" -s acceleration_infill="3000" -s travel_avoid_supports="False" -s jerk_print_layer_0="20" -s material_anti_ooze_retracted_position="-4" -s acceleration_support_interface="3000" -s spaghetti_max_infill_angle="10" -s support_bottom_material_flow="100" -s ironing_enabled="False" -s acceleration_travel="5000" -s acceleration_wall="3000" -s travel_compensate_overlapping_walls_enabled="True" -s ironing_only_highest_layer="False" -s jerk_prime_tower="20" -s skin_outline_count="1" -s xy_offset_layer_0="0" -s support_xy_distance_overhang="0.2" -s resolution="0" -s skin_line_width="0.4" -s acceleration_support_bottom="3000" -s material_end_of_filament_purge_length="20" -s material_break_preparation_speed="2" -s acceleration_layer_0="3000" -s bridge_fan_speed_2="0" -s bridge_skin_material_flow_3="110" -s initial_bottom_layers="6" -s support_interface_pattern="concentric" -s machine_extruder_end_pos_x="0" -s support_tree_angle="40" -s gradual_infill_steps="0" -s speed_wall="15.0" -s support_xy_distance="0.7" -s support_join_distance="2.0" -s wipe_hop_amount="1" -s wipe_retraction_enable="True" -s material_flush_purge_speed="0.5" -s bridge_skin_speed_2="10" -s layer_start_x="0.0" -s machine_min_cool_heat_time_window="50.0" -s machine_endstop_positive_direction_z="True" -s coasting_volume="0.064" -s raft_surface_layers="2" -s skirt_brim_minimal_length="250" -s expand_skins_expand_distance="1.6" -s mesh_position_x="0" -s raft_surface_acceleration="3000" -s speed_topbottom="15.0" -s raft_smoothing="5" -s material_anti_ooze_retraction_speed="5" -s support_conical_enabled="False" -s max_extrusion_before_wipe="10" -s raft_base_line_spacing="1.6" -s speed_support_infill="30" -s conical_overhang_angle="50" -s mesh_position_z="0" -s infill_overlap_mm="0.05600000000000001" -s cool_fan_speed_min="80" -s wipe_move_distance="20" -s bridge_fan_speed_3="0" -s ironing_inset="0.2" -s machine_nozzle_cool_down_speed="2.0" -s skirt_brim_material_flow="100" -s bridge_skin_speed="10" -s conical_overhang_enabled="False" -s speed_travel_layer_0="60.0" -s retract_at_layer_change="False" -s speed_wall_x="30.0" -s jerk_layer_0="20" -s switch_extruder_extra_prime_amount="0" -s machine_endstop_positive_direction_y="False" -s jerk_support_roof="20" -s center_object="False" -s skirt_brim_line_width="0.4" -s top_bottom_pattern="lines" -s cool_fan_full_layer="2" -s z_seam_y="200" -s extruder_prime_pos_y="0" -s raft_jerk="20" -s speed_print_layer_0="12" -s support_bottom_line_width="0.4" -s cool_min_layer_time_fan_speed_max="10" -s bridge_skin_support_threshold="50" -s spaghetti_max_height="2.0" -s support_roof_density="100" -s acceleration_roofing="3000" -s retraction_hop_enabled="False" -s switch_extruder_retraction_speed="20" -s minimum_support_area="0.0" -s machine_settings="0" -s acceleration_topbottom="3000" -s wall_line_width_x="0.4" -s jerk_support="20" -s infill_randomize_start_location="False" -s skin_overlap="5" -s infill_wipe_dist="0.1" -s meshfix_union_all="True" -s support_z_distance="0.1" -s support_initial_layer_line_distance="2.6666666666666665" -s support_bottom_density="100" -s skin_material_flow="100" -s small_hole_max_size="0" -s material="0" -s infill_before_walls="True" -s shell="0" -s support_infill_angles="[ ]" -s support_interface_enable="False" -s bridge_skin_density_3="80" -s bridge_wall_material_flow="50" -s top_layers="6" -s acceleration_skirt_brim="3000" -s meshfix="0" -s cross_support_density_image="" -s z_seam_relative="False" -s slicing_tolerance="exclusive" -s machine_extruder_end_pos_y="0" -s raft_interface_line_spacing="1.0" -s material_flush_purge_length="60" -s machine_nozzle_heat_up_speed="2.0" -s wall_thickness="0.8" -s support_bottom_distance="0" -s machine_steps_per_mm_e="1600" -s material_crystallinity="False" -s speed_prime_tower="30" -s infill="0" -s spaghetti_flow="20" -s bridge_skin_speed_3="10" -s filter_out_tiny_gaps="True" -s magic_fuzzy_skin_point_dist="0.8" -s support_roof_line_distance="0.4" -s brim_line_count="12" -s material_guid="0ff92885-617b-4144-a03c-9989872454bc" -s support_roof_pattern="concentric" -s prime_tower_wipe_enabled="True" -s fill_perimeter_gaps="everywhere" -s retraction_retract_speed="65" -s zig_zaggify_infill="False" -s layer_start_y="0.0" -s extruder_prime_pos_x="0" -s bottom_skin_expand_distance="1.6" -s wall_overhang_speed_factor="100" -s jerk_support_infill="20" -s speed_ironing="10.0" -s limit_support_retractions="True" -s machine_endstop_positive_direction_x="False" -s acceleration_print="3000" -s material_linear_advance_factor_wall_x="0" -s material_final_print_temperature="202" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s roofing_angles="[ ]" -s jerk_ironing="20" -s machine_steps_per_mm_x="50" -s raft_interface_speed="11.25" -s travel_avoid_distance="0.625" -s raft_fan_speed="0" -s magic_mesh_surface_mode="normal" -s z_seam_type="sharpest_corner" -s retraction_prime_speed="65" -s material_linear_advance_factor_prime_tower="0" -s speed_support_bottom="20.0" -s material_extrusion_cool_down_speed="0.7" -s small_feature_speed_factor="50" -s switch_extruder_retraction_amount="16" -s material_maximum_park_duration="300" -s machine_nozzle_temp_enabled="True" -s skirt_brim_speed="12" -s infill_support_angle="40" -s speed_equalize_flow_max="150" -s jerk_wall_x="20" -s support_roof_angles="[ ]" -s optimize_wall_printing_order="False" -s line_width="0.4" -s zig_zaggify_support="False" -s wipe_hop_enable="False" -s speed_print="30" -s ironing_pattern="zigzag" -s speed_travel="150" -s support_angle="70" -s raft_base_speed="11.25" -s layer_0_z_overlap="0.15" -s top_bottom_thickness="0.8" -s material_initial_print_temperature="207" -s material_break_retracted_position="-50" -s jerk_skirt_brim="20" -s jerk_print="20" -s raft_base_acceleration="3000" -s retraction_extrusion_window="2.5" -s machine_extruder_start_pos_y="0" -s support_fan_enable="False" -s support_brim_width="8.0" -s machine_nozzle_head_distance="3" -s bridge_wall_coast="100" -s raft_interface_fan_speed="0" -s jerk_topbottom="20" -s prime_blob_enable="False" -s meshfix_keep_open_polygons="False" -s top_skin_expand_distance="1.6" -s acceleration_ironing="3000" -s prime_tower_flow="100" -s machine_extruder_start_pos_abs="False" -s clean_between_layers="False" -s material_linear_advance_factor_wall_0="0" -s wall_0_wipe_dist="0.2" -s skin_angles="[ ]" -s machine_steps_per_mm_z="50" -s wall_overhang_angle="90" -s cool_fan_enabled="True" -s cool_fan_speed_max="80" -s machine_extruder_end_code="" -s meshfix_maximum_deviation="0.05" -s gradual_support_infill_step_height="1" -s support_tower_roof_angle="65" -s extruder_prime_pos_z="0" -s acceleration_prime_tower="3000" -s machine_extruder_end_pos_abs="False" -s retraction_hop_after_extruder_switch_height="1" -s skirt_gap="3" -s small_feature_max_length="0.0" -s skin_overlap_mm="0.02" -s bottom_thickness="0.8" -s material_shrinkage_percentage="0" -s raft_interface_jerk="20" -s experimental="0" -s raft_base_thickness="0.36" -s retraction_hop_after_extruder_switch="True" -s support_top_distance="0.1" -s travel="0" -s acceleration_support="3000" -s support_interface_material_flow="100" -s extruder_nr="0" -s infill_overlap="14" -s raft_interface_line_width="0.8" -s material_surface_energy="100" -s material_diameter="1.75" -s bridge_skin_material_flow="60" -s material_print_temperature="217" -s magic_fuzzy_skin_point_density="1.25" -s wall_line_count="4" -s bridge_skin_material_flow_2="100" -s speed_support_interface="20.0" -s support_bottom_enable="False" -s dual="0" -s infill_multiplier="1" -s brim_width="8.0" -s wall_0_inset="0" -s magic_fuzzy_skin_thickness="0.3" -s meshfix_extensive_stitching="False" -s roofing_pattern="lines" -s wipe_brush_pos_x="100" -s machine_nozzle_id="unknown" -s acceleration_travel_layer_0="5000.0" -s support_zag_skip_count="8" -s fill_outline_gaps="False" -s machine_filament_park_distance="16" -s wall_x_material_flow="100" -s min_skin_width_for_expansion="3.67394039744206e-17" -s infill_angles="[ ]" -s support_interface_offset="0.0" -s machine_feeder_wheel_diameter="10.0" -s retraction_hop_only_when_collides="False" -s support_interface_density="100" -s coasting_enable="False" -s material_linear_advance_factor_skirt_brim="0" -s jerk_travel="30" -s material_end_of_filament_purge_speed="0.5" -s raft_margin="15" -s support_bottom_stair_step_height="0.3" -s brim_outside_only="True" -s material_standby_temperature="175" -s speed_roofing="15.0" -s ironing_line_spacing="0.1" -s infill_sparse_thickness="0.1" -s extruder_prime_pos_abs="False" -s material_adhesion_tendency="0" -s speed_support="30" -s support_line_distance="2.6666666666666665" -s retraction_enable="True" -s retraction_count_max="90" -s skirt_line_count="4" -s support_interface_height="1" -s meshfix_maximum_travel_resolution="0.8" -s cool_fan_full_at_height="0.3" -s support_brim_enable="False" -s acceleration_print_layer_0="3000" -s support_bottom_angles="[ ]" -s support_skip_zag_per_mm="20" -s support_interface_line_width="0.4" -s speed_support_roof="20.0" -s support_tree_branch_distance="1" -s meshfix_maximum_resolution="0.5" -s wipe_repeat_count="5" -s top_bottom_pattern_0="lines" -s alternate_extra_perimeter="False" -s support_roof_enable="True" -s bridge_fan_speed="100" -s support_material_flow="100" -s wall_line_width="0.4" -s raft_surface_thickness="0.1" -s cool_fan_speed="80" -s material_linear_advance_factor_wall="0" -s coasting_min_volume="0.8" -s acceleration_wall_x="3000" -s cool_min_speed="10" -s material_linear_advance_factor_support_interface="0" -s material_flow="100" -s support_offset="0" -s spaghetti_inset="0.2" -s platform_adhesion="0" -s support_bottom_stair_step_width="5.0" -s speed_z_hop="10" -s speed_layer_0="12" -s infill_enable_travel_optimization="False" -s raft_surface_speed="15.0" -s support_supported_skin_fan_speed="100" -s infill_wall_line_count="0" -s support_line_width="0.4" -s support_tower_diameter="3.0" -s machine_extruder_start_pos_x="0" -s jerk_roofing="20" -s machine_nozzle_offset_y="0" -s bridge_skin_density="100" -s raft_base_line_width="0.8" -s travel_compensate_overlapping_walls_0_enabled="True" -s bridge_enable_more_layers="True" -s support_bottom_height="1" -s raft_acceleration="3000" -s mold_angle="40" -s raft_speed="15.0" -s material_no_load_move_factor="0.940860215" -s raft_surface_line_spacing="0.4" -s roofing_material_flow="100" -s bridge_sparse_infill_max_density="0" -s support_roof_line_width="0.4" -s brim_gap="0" -s acceleration_support_infill="3000" -s support_interface_skip_height="0.3" -s mold_width="5" -s switch_extruder_retraction_speeds="20" -s jerk_infill="20" -s support_tree_collision_resolution="0.2" -s raft_base_fan_speed="0" -s material_print_temperature_layer_0="217" -s support_tree_branch_diameter_angle="5" -s infill_pattern="grid" -s connect_skin_polygons="False" -s material_break_preparation_temperature="217" -s bridge_wall_speed="10" -s support_bottom_offset="0.0" -s wall_0_material_flow="100" -s support_pattern="lines" -s raft_interface_thickness="0.15000000000000002" -s support_bottom_pattern="concentric" -s multiple_mesh_overlap="0.15" -s wipe_retraction_retract_speed="65" -s speed_equalize_flow_enabled="False" -s xy_offset="0" -s machine_extruder_cooling_fan_number="0" -s minimum_roof_area="1.0" -s roofing_line_width="0.4" -s top_thickness="0.8" -s gradual_support_infill_steps="0" -s infill_sparse_density="20" -s wipe_retraction_extra_prime_amount="0" -s cooling="0" -s small_feature_speed_factor_0="50" -s infill_line_width="0.4" -s magic_fuzzy_skin_outside_only="False" -s prime_tower_line_width="0.4" -s raft_surface_line_width="0.4" -s z_seam_corner="z_seam_corner_inner" -s retraction_amount="2.5" -s wipe_retraction_speed="65" -s raft_interface_acceleration="3000" -s raft_surface_fan_speed="0" -s spaghetti_infill_stepped="True" -s speed="0" -s support_roof_offset="0.0" -s acceleration_support_roof="3000" -s skin_edge_support_layers="0" -s support_infill_sparse_thickness="0.1" -s support_roof_height="1.2" -s initial_layer_line_width_factor="104.0" -s infill_material_flow="100" -s gradual_infill_step_height="1.5" -s cool_lift_head="False" -s speed_wall_0="15.0" -s jerk_travel_layer_0="30.0" -s support_conical_min_width="5.0" -s machine_extruder_start_code="" -s connect_infill_polygons="False" -s switch_extruder_prime_speed="20" -s default_material_print_temperature="200" -s roofing_layer_count="0" -g -e0 -l "0" -s extruder_nr="0"
2020-03-07 20:58:58,019 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 217 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-07 20:58:58,219 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-07 20:58:58,223 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-07 20:58:58,241 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [663]: Slicing took 6.7514050006866455 seconds
2020-03-07 20:58:58,241 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [664]: Number of models per buildplate: {0: 1}
2020-03-07 20:58:58,242 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [678]: See if there is more to slice...
2020-03-07 20:58:58,453 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [181]: Socket state changed to Closing
2020-03-07 20:58:58,456 - DEBUG - [MainThread] UM.Backend.Backend._onSocketError [203]: Socket debug: Arcus Error (13): Closing socket because other side requested close.
2020-03-07 20:58:58,458 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [183]: Socket state changed to Closed
2020-03-07 20:58:58,458 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onBackendQuit [829]: Backend quit with return code 0. Resetting process and socket.
2020-03-07 20:58:58,774 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 20:59:01,882 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-07 20:59:01,886 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-07 20:59:02,097 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [135]: New error check scheduled.
2020-03-07 20:59:02,357 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._checkStack [139]: Need to check for errors again. Discard the current progress and reschedule a check.
2020-03-07 20:59:02,468 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [135]: New error check scheduled.
2020-03-07 20:59:02,785 - INFO - [MainThread] cura.Machines.MachineErrorChecker._setResult [187]: Error check finished, result = False, time = 0.3s
2020-03-07 20:59:05,844 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [225]: Starting to slice...
2020-03-07 20:59:05,845 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [243]: Going to slice build plate [0]!
2020-03-07 20:59:05,855 - DEBUG - [MainThread] UM.Backend.Backend._createSocket [213]: Previous socket existed. Closing that first.
2020-03-07 20:59:05,864 - WARNING - [Thread-7] UM.Decorators.deprecated_function [20]: <function GlobalStack.extruders at 0x60000513c918> is deprecated (since 4.4): Please use extruderList instead.
2020-03-07 20:59:05,946 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [173]: Socket state changed to Listening
2020-03-07 20:59:06,081 - INFO - [MainThread] UM.Backend.Backend.startEngine [81]: Started engine process: /Applications/Ultimaker Cura 3.app/Contents/MacOS/CuraEngine
2020-03-07 20:59:06,083 - DEBUG - [MainThread] UM.Backend.Backend._backendLog [101]: [Backend] Calling engine with: ['/Applications/Ultimaker Cura 3.app/Contents/MacOS/CuraEngine', 'connect', '127.0.0.1:49674', '']
2020-03-07 20:59:06,105 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [177]: Socket state changed to Connected
2020-03-07 20:59:06,113 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-03-07 20:59:06,116 - DEBUG - [MainThread] UM.Backend.Backend._onSocketStateChanged [167]: Backend connected on port 49674
2020-03-07 20:59:06,123 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] Cura_SteamEngine version 4.5.0
2020-03-07 20:59:06,126 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] Copyright (C) 2019 Ultimaker
2020-03-07 20:59:06,128 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-03-07 20:59:06,131 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] This program is free software: you can redistribute it and/or modify
2020-03-07 20:59:06,134 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] it under the terms of the GNU Affero General Public License as published by
2020-03-07 20:59:06,136 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] the Free Software Foundation, either version 3 of the License, or
2020-03-07 20:59:06,140 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] (at your option) any later version.
2020-03-07 20:59:06,144 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-03-07 20:59:06,149 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] This program is distributed in the hope that it will be useful,
2020-03-07 20:59:06,153 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] but WITHOUT ANY WARRANTY; without even the implied warranty of
2020-03-07 20:59:06,157 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
2020-03-07 20:59:06,160 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] GNU Affero General Public License for more details.
2020-03-07 20:59:06,164 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-03-07 20:59:06,168 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] You should have received a copy of the GNU Affero General Public License
2020-03-07 20:59:06,173 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] along with this program.  If not, see <http://www.gnu.org/licenses/>.
2020-03-07 20:59:06,281 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onStartSliceCompleted [429]: Sending slice message took 0.4366109371185303 seconds
2020-03-07 20:59:06,345 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING]  -s machine_name="Wanhao Duplicator i3 Plus" -s cool_min_layer_time="5" -s material_linear_advance_factor="0" -s wireframe_flat_delay="0.1" -s machine_heat_zone_length="16" -s support_infill_rate="15" -s top_skin_preshrink="0.8" -s skin_preshrink="0.8" -s machine_nozzle_size="0.4" -s mold_roof_height="0.5" -s support_skip_some_zags="False" -s prime_tower_brim_enable="False" -s material_linear_advance_factor_infill="0" -s command_line_settings="0" -s z_seam_position="back" -s retraction_min_travel="0.8" -s max_skin_angle_for_expansion="90" -s mesh_position_y="0" -s machine_acceleration="4000" -s retraction_extra_prime_amount="0" -s draft_shield_dist="10" -s bridge_skin_density_2="75" -s coasting_speed="90" -s bottom_skin_preshrink="0.8" -s travel_compensate_overlapping_walls_x_enabled="True" -s wall_material_flow="100" -s retraction_combing="all" -s material_flow_layer_0="100" -s skin_no_small_gaps_heuristic="False" -s minimum_interface_area="1.0" -s support_interface_angles="[ ]" -s machine_depth="200" -s brim_replaces_support="True" -s sub_div_rad_add="0.4" -s raft_base_jerk="20" -s machine_max_feedrate_z="299792458000" -s meshfix_union_all_remove_holes="False" -s support_roof_material_flow="100" -s magic_spiralize="False" -s initial_extruder_nr="0" -s jerk_support_interface="20" -s raft_airgap="0.3" -s wall_min_flow_retract="False" -s mold_enabled="False" -s adaptive_layer_height_variation_step="0.01" -s raft_surface_jerk="20" -s travel_avoid_other_parts="True" -s retraction_speed="25" -s acceleration_wall_0="3000" -s jerk_support_bottom="20" -s support_extruder_nr="0" -s infill_offset_x="0" -s outer_inset_first="False" -s gradual_infill_step_height="1.5" -s machine_shape="rectangular" -s support_tower_diameter="3.0" -s prime_tower_min_volume="6" -s bridge_skin_material_flow="60" -s raft_fan_speed="0" -s ooze_shield_dist="2" -s small_hole_max_size="0" -s support_tower_roof_angle="65" -s extruder_prime_pos_z="0" -s raft_surface_thickness="0.1" -s magic_fuzzy_skin_enabled="False" -s material_break_speed="25" -s alternate_carve_order="True" -s support_use_towers="True" -s support_bottom_angles="[ ]" -s machine_feeder_wheel_diameter="10.0" -s ironing_pattern="zigzag" -s support_bottom_stair_step_height="0.3" -s machine_start_gcode="" -s initial_layer_line_width_factor="100.0" -s retraction_combing_max_distance="0" -s draft_shield_height="10" -s z_seam_x="100.0" -s conical_overhang_enabled="False" -s jerk_wall="20" -s support_roof_offset="0.0" -s raft_interface_acceleration="3000" -s spaghetti_max_height="2.0" -s prime_tower_wipe_enabled="True" -s xy_offset_layer_0="0" -s machine_minimum_feedrate="0.0" -s minimum_bottom_area="1.0" -s infill_line_distance="4.0" -s support_bottom_line_distance="0.4" -s skin_angles="[ ]" -s retraction_count_max="90" -s retract_at_layer_change="False" -s support_conical_angle="30" -s brim_width="8.0" -s spaghetti_infill_enabled="False" -s support="0" -s infill_mesh_order="0" -s optimize_wall_printing_order="False" -s machine_nozzle_cool_down_speed="2.0" -s wireframe_up_half_speed="0.3" -s material_linear_advance_factor_support="0" -s support_join_distance="2.0" -s wipe_hop_amount="1" -s wipe_hop_speed="10" -s acceleration_infill="3000" -s travel_avoid_supports="False" -s center_object="False" -s speed_layer_0="30.0" -s meshfix_union_all="True" -s support_z_distance="0.1" -s jerk_print_layer_0="20" -s wireframe_roof_inset="3" -s material_anti_ooze_retracted_position="-4" -s skin_edge_support_thickness="0" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s machine_max_acceleration_z="100" -s support_wall_count="0" -s acceleration_support_interface="3000" -s spaghetti_max_infill_angle="10" -s raft_jerk="20" -s raft_surface_line_width="0.4" -s travel_compensate_overlapping_walls_enabled="True" -s support_tree_branch_diameter="2" -s machine_steps_per_mm_y="50" -s wireframe_printspeed="5" -s speed_prime_tower="60" -s adhesion_type="skirt" -s ironing_only_highest_layer="False" -s support_mesh_drop_down="True" -s min_infill_area="0" -s machine_nozzle_tip_outer_diameter="1" -s support_xy_overrides_z="z_overrides_xy" -s material_bed_temperature="63" -s support_xy_distance_overhang="0.2" -s wireframe_printspeed_up="5" -s resolution="0" -s skin_line_width="0.4" -s acceleration_layer_0="3000" -s machine_max_jerk_z="0.4" -s support_tree_angle="40" -s speed_wall="30.0" -s support_xy_distance="0.7" -s day="Sat" -s wipe_retraction_enable="True" -s material_print_temp_prepend="True" -s wireframe_printspeed_down="5" -s material_flush_purge_speed="0.5" -s bridge_skin_speed_2="15.0" -s machine_endstop_positive_direction_z="True" -s coasting_volume="0.064" -s raft_surface_layers="2" -s skirt_brim_minimal_length="250" -s expand_skins_expand_distance="0.8" -s prime_tower_position_y="175.584" -s mesh_position_x="0" -s print_temperature="210" -s raft_surface_acceleration="3000" -s speed_topbottom="30.0" -s raft_smoothing="5" -s material_anti_ooze_retraction_speed="5" -s support_conical_enabled="False" -s machine_endstop_positive_direction_y="False" -s wireframe_top_delay="0" -s max_extrusion_before_wipe="10" -s raft_base_line_spacing="1.6" -s speed_support_infill="60" -s conical_overhang_angle="50" -s mesh_position_z="0" -s infill_overlap_mm="0.04" -s smooth_spiralized_contours="True" -s carve_multiple_volumes="False" -s acceleration_wall_x="3000" -s flow_rate_extrusion_offset_factor="100" -s cool_fan_speed_min="100.0" -s wipe_move_distance="20" -s wireframe_roof_outer_delay="0.2" -s bridge_fan_speed_3="0" -s ironing_inset="0.2" -s skirt_brim_material_flow="100" -s bridge_skin_speed="15.0" -s support_roof_angles="[ ]" -s material_print_temp_wait="True" -s speed_travel_layer_0="60.0" -s jerk_layer_0="20" -s switch_extruder_extra_prime_amount="0" -s speed_wall_x="60.0" -s time="20:59:05" -s machine_buildplate_type="glass" -s wireframe_height="3" -s cross_support_density_image="" -s z_seam_relative="False" -s skirt_brim_line_width="0.4" -s top_bottom_pattern="lines" -s cool_fan_full_layer="2" -s z_seam_y="200" -s acceleration_support="3000" -s support_bottom_line_width="0.4" -s cool_min_layer_time_fan_speed_max="10" -s bridge_skin_support_threshold="50" -s support_roof_density="100" -s acceleration_roofing="3000" -s retraction_hop_enabled="False" -s switch_extruder_retraction_speed="20" -s minimum_support_area="0.0" -s wireframe_flow_connection="100" -s machine_settings="0" -s acceleration_topbottom="3000" -s wipe_retraction_prime_speed="25" -s wipe_pause="0" -s machine_min_cool_heat_time_window="50.0" -s layer_start_x="0.0" -s infill_randomize_start_location="False" -s gradual_infill_steps="0" -s machine_show_variants="False" -s print_sequence="all_at_once" -s skin_overlap="5" -s support_interface_offset="0.0" -s support_tree_enable="False" -s infill_wipe_dist="0.1" -s wall_0_extruder_nr="-1" -s support_brim_line_count="20" -s cool_fan_speed_0="0" -s infill_support_enabled="False" -s blackmagic="0" -s machine_max_feedrate_x="299792458000" -s machine_width="200" -s draft_shield_height_limitation="full" -s wireframe_printspeed_flat="5" -s anti_overhang_mesh="False" -s support_bottom_density="100" -s skin_material_flow="100" -s material="0" -s material_bed_temp_prepend="True" -s infill_before_walls="True" -s shell="0" -s support_infill_angles="[ ]" -s support_interface_enable="False" -s bridge_skin_density_3="80" -s bridge_wall_material_flow="50" -s top_layers="8" -s acceleration_skirt_brim="3000" -s meshfix="0" -s date="07-03-2020" -s machine_extruder_count="1" -s jerk_support_roof="20" -s material_break_preparation_retracted_position="-16" -s infill_mesh="False" -s layer_height="0.1" -s raft_interface_line_spacing="1.0" -s material_flush_purge_length="60" -s machine_nozzle_heat_up_speed="2.0" -s wall_thickness="0.8" -s machine_steps_per_mm_e="1600" -s support_bottom_distance="0" -s material_crystallinity="False" -s infill="0" -s support_infill_extruder_nr="0" -s spaghetti_flow="20" -s filter_out_tiny_gaps="True" -s bridge_skin_speed_3="15.0" -s magic_fuzzy_skin_point_dist="0.8" -s support_tower_maximum_supported_diameter="3.0" -s support_interface_extruder_nr="0" -s nozzle_disallowed_areas="[]" -s machine_heated_build_volume="False" -s extruder_prime_pos_y="0" -s adaptive_layer_height_enabled="False" -s spaghetti_infill_extra_volume="0" -s support_connect_zigzags="True" -s support_roof_line_distance="0.4" -s brim_line_count="12" -s material_guid="" -s fill_perimeter_gaps="everywhere" -s wireframe_strategy="compensate" -s wireframe_roof_fall_down="2" -s machine_gcode_flavor="RepRap (Marlin/Sprinter)" -s speed_print_layer_0="30.0" -s wireframe_flow_flat="100" -s support_supported_skin_fan_speed="100" -s infill_wall_line_count="0" -s small_feature_speed_factor="50" -s support_roof_pattern="concentric" -s support_mesh="False" -s bottom_skin_expand_distance="0.8" -s wall_overhang_speed_factor="100" -s jerk_support_infill="20" -s support_interface_height="1" -s ironing_line_spacing="0.1" -s machine_max_feedrate_y="299792458000" -s adhesion_z_offset_extensive_processing="False" -s machine_firmware_retract="False" -s switch_extruder_retraction_speeds="20" -s infill_overlap="10" -s support_interface_material_flow="100" -s infill_angles="[ ]" -s draft_shield_enabled="False" -s connect_skin_polygons="False" -s infill_pattern="grid" -s roofing_pattern="lines" -s support_bottom_material_flow="100" -s acceleration_wall="3000" -s ironing_enabled="False" -s acceleration_travel="5000" -s gradual_support_infill_steps="0" -s jerk_infill="20" -s wall_0_wipe_dist="0.2" -s material_linear_advance_factor_wall_0="0" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s platform_adhesion="0" -s support_bottom_stair_step_width="5.0" -s bridge_sparse_infill_max_density="0" -s top_bottom_pattern_0="lines" -s alternate_extra_perimeter="False" -s support_roof_enable="True" -s machine_steps_per_mm_x="50" -s ooze_shield_enabled="False" -s support_line_width="0.4" -s wireframe_straight_before_down="20" -s acceleration_support_roof="3000" -s raft_interface_speed="22.5" -s travel_avoid_distance="0.625" -s small_feature_speed_factor_0="50" -s material_break_retracted_position="-50" -s material_initial_print_temperature="200" -s ooze_shield_angle="60" -s machine_endstop_positive_direction_x="False" -s material_final_print_temperature="195" -s acceleration_print="3000" -s material_linear_advance_factor_wall_x="0" -s machine_steps_per_mm_z="50" -s speed_support_bottom="20.0" -s material_extrusion_cool_down_speed="0.7" -s switch_extruder_retraction_amount="16" -s material_maximum_park_duration="300" -s machine_nozzle_temp_enabled="True" -s skirt_brim_speed="30.0" -s infill_support_angle="40" -s material_flow="100" -s support_offset="0" -s wireframe_fall_down="0.5" -s speed_equalize_flow_max="150" -s jerk_wall_x="20" -s bridge_skin_material_flow_2="100" -s speed_support_interface="40.0" -s machine_max_acceleration_x="9000" -s extruders_enabled_count="1" -s machine_end_gcode="" -s machine_center_is_zero="False" -s speed_travel="120" -s support_angle="70" -s raft_base_speed="22.5" -s layer_0_z_overlap="0.15" -s retraction_hop="1" -s jerk_wall_0="20" -s support_roof_extruder_nr="0" -s acceleration_enabled="False" -s top_bottom_thickness="0.8" -s slicing_tolerance="middle" -s jerk_skirt_brim="20" -s jerk_print="20" -s wall_extruder_nr="-1" -s raft_base_acceleration="3000" -s retraction_extrusion_window="6.5" -s support_fan_enable="False" -s bridge_wall_coast="100" -s raft_interface_fan_speed="0" -s remove_empty_first_layers="True" -s jerk_topbottom="20" -s prime_blob_enable="False" -s meshfix_keep_open_polygons="False" -s wireframe_roof_drag_along="0.8" -s acceleration_support_bottom="3000" -s material_end_of_filament_purge_length="20" -s material_break_preparation_speed="2" -s machine_heated_bed="True" -s machine_use_extruder_offset_to_offset_coords="True" -s top_skin_expand_distance="0.8" -s acceleration_ironing="3000" -s prime_tower_flow="100" -s speed_infill="60" -s wireframe_nozzle_clearance="1" -s bridge_wall_min_length="5" -s experimental="0" -s prime_tower_position_x="195.584" -s clean_between_layers="False" -s wireframe_drag_along="0.6" -s meshfix_maximum_deviation="0.05" -s gradual_support_infill_step_height="1" -s retraction_prime_speed="25" -s z_seam_type="sharpest_corner" -s material_linear_advance_factor_prime_tower="0" -s print_bed_temperature="63" -s magic_mesh_surface_mode="normal" -s acceleration_prime_tower="3000" -s retraction_hop_after_extruder_switch_height="1" -s skirt_gap="3" -s roofing_extruder_nr="-1" -s jerk_support="20" -s wall_line_width_x="0.4" -s raft_base_thickness="0.36" -s retraction_hop_after_extruder_switch="True" -s support_top_distance="0.1" -s travel="0" -s raft_interface_line_width="0.8" -s gantry_height="180" -s material_surface_energy="100" -s speed_print="60" -s support_enable="False" -s adaptive_layer_height_threshold="0.2" -s minimum_polygon_circumference="1.0" -s material_print_temperature="210" -s wall_x_extruder_nr="-1" -s switch_extruder_prime_speed="20" -s material_linear_advance_factor_support_interface="0" -s infill_multiplier="1" -s relative_extrusion="False" -s wall_0_inset="0" -s material_flow_dependent_temperature="False" -s bottom_layers="8" -s infill_offset_y="0" -s magic_fuzzy_skin_thickness="0.3" -s meshfix_extensive_stitching="False" -s machine_nozzle_id="unknown" -s wipe_brush_pos_x="100" -s acceleration_travel_layer_0="5000.0" -s support_zag_skip_count="8" -s fill_outline_gaps="False" -s machine_filament_park_distance="16" -s support_bottom_height="1" -s raft_acceleration="3000" -s support_skip_zag_per_mm="20" -s support_interface_line_width="0.4" -s speed_support_roof="20.0" -s support_tree_branch_distance="1" -s meshfix_maximum_resolution="0.5" -s wipe_repeat_count="5" -s wall_x_material_flow="100" -s min_skin_width_for_expansion="4.898587196589413e-17" -s machine_height="180" -s travel_retract_before_outer_wall="False" -s infill_enable_travel_optimization="False" -s raft_surface_speed="30.0" -s machine_max_acceleration_y="9000" -s raft_interface_jerk="20" -s material_shrinkage_percentage="0" -s raft_surface_fan_speed="0" -s machine_max_feedrate_e="299792458000" -s spaghetti_infill_stepped="True" -s cool_lift_head="False" -s speed_wall_0="30.0" -s machine_extruders_share_heater="False" -s skin_outline_count="1" -s jerk_prime_tower="20" -s support_conical_min_width="5.0" -s minimum_roof_area="1.0" -s roofing_line_width="0.4" -s bridge_fan_speed_2="0" -s bridge_skin_material_flow_3="110" -s support_interface_pattern="concentric" -s initial_bottom_layers="8" -s support_extruder_nr_layer_0="0" -s meshfix_maximum_travel_resolution="0.8" -s cool_fan_full_at_height="0.3" -s support_brim_enable="False" -s acceleration_print_layer_0="3000" -s bridge_fan_speed="100" -s support_material_flow="100" -s top_thickness="0.8" -s wall_line_width_0="0.4" -s cross_infill_pocket_size="4.0" -s material_end_of_filament_purge_speed="0.5" -s machine_max_jerk_e="5.0" -s raft_margin="15" -s jerk_travel="30" -s layer_height_0="0.3" -s material_linear_advance_factor_skirt_brim="0" -s brim_outside_only="True" -s material_standby_temperature="150" -s speed_roofing="30.0" -s jerk_travel_layer_0="30.0" -s skin_edge_support_layers="0" -s support_type="buildplate" -s spaghetti_inset="0.2" -s support_bottom_extruder_nr="0" -s machine_nozzle_expansion_angle="45" -s speed_z_hop="10" -s material_bed_temp_wait="True" -s wipe_hop_enable="False" -s zig_zaggify_support="False" -s jerk_roofing="20" -s bridge_skin_density="100" -s raft_base_line_width="0.8" -s small_feature_max_length="0.0" -s skin_overlap_mm="0.02" -s bottom_thickness="0.8" -s wireframe_printspeed_bottom="5" -s travel_compensate_overlapping_walls_0_enabled="True" -s mold_angle="40" -s raft_speed="30.0" -s material_no_load_move_factor="0.940860215" -s raft_surface_line_spacing="0.4" -s roofing_material_flow="100" -s wipe_retraction_extra_prime_amount="0" -s xy_offset="0" -s wall_line_width="0.4" -s cool_fan_speed="100.0" -s prime_tower_enable="False" -s material_linear_advance_factor_wall="0" -s coasting_min_volume="0.8" -s cool_min_speed="10" -s speed_support="60" -s adhesion_z_offset="0" -s infill_extruder_nr="-1" -s infill_sparse_density="20" -s machine_disallowed_areas="[]" -s infill_sparse_thickness="0.1" -s extruder_prime_pos_abs="False" -s material_adhesion_tendency="10" -s wireframe_top_jump="0.6" -s wall_0_material_flow="100" -s support_interface_skip_height="0.3" -s adhesion_extruder_nr="0" -s mold_width="5" -s acceleration_support_infill="3000" -s brim_gap="0" -s material_break_preparation_temperature="210" -s ironing_flow="10.0" -s wall_min_flow="0" -s jerk_enabled="False" -s speed_ironing="20.0" -s limit_support_retractions="True" -s machine_max_acceleration_e="10000" -s bridge_enable_more_layers="True" -s line_width="0.4" -s wireframe_bottom_delay="0" -s raft_interface_thickness="0.15000000000000002" -s support_bottom_pattern="concentric" -s multiple_mesh_overlap="0.15" -s wipe_retraction_retract_speed="25" -s support_pattern="lines" -s skirt_line_count="4" -s support_line_distance="2.6666666666666665" -s retraction_enable="True" -s support_infill_sparse_thickness="0.1" -s material_bed_temperature_layer_0="63" -s wall_line_count="2" -s magic_fuzzy_skin_point_density="1.25" -s support_bottom_enable="False" -s dual="0" -s support_roof_line_width="0.4" -s default_material_bed_temperature="60" -s support_interface_density="100" -s coasting_enable="False" -s retraction_hop_only_when_collides="False" -s cool_fan_speed_max="100.0" -s cool_fan_enabled="True" -s wall_overhang_angle="90" -s raft_base_fan_speed="0" -s support_tree_collision_resolution="0.2" -s support_tree_branch_diameter_angle="5" -s speed_equalize_flow_enabled="False" -s support_brim_width="8.0" -s machine_nozzle_head_distance="3" -s cutting_mesh="False" -s machine_max_jerk_xy="20.0" -s travel_speed="120" -s speed="0" -s prime_tower_size="20" -s wipe_retraction_amount="6.5" -s material_break_temperature="50" -s top_bottom_extruder_nr="-1" -s cooling="0" -s material_print_temperature_layer_0="210" -s bridge_settings_enabled="False" -s infill_line_width="0.4" -s magic_fuzzy_skin_outside_only="False" -s prime_tower_line_width="0.4" -s material_diameter="2.85" -s flow_rate_max_extrusion_offset="0" -s machine_head_with_fans_polygon="[[-20, 10], [10, 10], [10, -10], [-20, -10]]" -s z_seam_corner="z_seam_corner_inner" -s retraction_amount="6.5" -s wipe_retraction_speed="25" -s bridge_wall_speed="15.0" -s support_bottom_offset="0.0" -s support_initial_layer_line_distance="2.6666666666666665" -s layer_start_y="0.0" -s build_volume_temperature="28" -s extruder_prime_pos_x="0" -s zig_zaggify_infill="False" -s retraction_retract_speed="25" -s support_roof_height="1.2" -s infill_material_flow="100" -s material_linear_advance_factor_topbottom="0" -s wireframe_enabled="False" -s cross_infill_density_image="" -s adaptive_layer_height_variation="0.1" -s roofing_angles="[ ]" -s jerk_ironing="20" -s wireframe_flow="100" -s connect_infill_polygons="False" -s speed_slowdown_layers="2" -s default_material_print_temperature="210" -s roofing_layer_count="0" -e0 -s cool_min_layer_time="5" -s material_linear_advance_factor="0" -s machine_heat_zone_length="16" -s support_infill_rate="15" -s top_skin_preshrink="1.6" -s skin_preshrink="1.6" -s support_tower_maximum_supported_diameter="3.0" -s machine_nozzle_size="0.4" -s mold_roof_height="0.5" -s support_skip_some_zags="False" -s material_linear_advance_factor_topbottom="0" -s material_linear_advance_factor_infill="0" -s speed_infill="30" -s command_line_settings="0" -s z_seam_position="back" -s retraction_min_travel="0.8" -s max_skin_angle_for_expansion="90" -s mesh_position_y="0" -s infill_offset_y="0" -s retraction_extra_prime_amount="0" -s machine_nozzle_offset_x="0" -s bridge_skin_density_2="75" -s coasting_speed="90" -s bottom_skin_preshrink="1.6" -s travel_compensate_overlapping_walls_x_enabled="True" -s wall_material_flow="100" -s material_flow_layer_0="100" -s skin_no_small_gaps_heuristic="False" -s cross_infill_density_image="" -s minimum_interface_area="1.0" -s support_interface_angles="[ ]" -s brim_replaces_support="True" -s sub_div_rad_add="0.4" -s raft_base_jerk="20" -s meshfix_union_all_remove_holes="False" -s support_roof_material_flow="100" -s jerk_support_interface="20" -s raft_airgap="0.3" -s spaghetti_infill_enabled="False" -s support="0" -s wall_min_flow_retract="False" -s mold_enabled="False" -s raft_surface_jerk="20" -s travel_avoid_other_parts="True" -s retraction_speed="65" -s acceleration_wall_0="3000" -s jerk_support_bottom="20" -s infill_offset_x="0" -s outer_inset_first="False" -s material_break_preparation_retracted_position="-16" -s prime_tower_min_volume="6" -s magic_fuzzy_skin_enabled="False" -s material_break_speed="25" -s machine_nozzle_tip_outer_diameter="1" -s support_xy_overrides_z="z_overrides_xy" -s min_infill_area="0" -s support_use_towers="True" -s jerk_wall_0="20" -s retraction_hop="1" -s support_connect_zigzags="True" -s spaghetti_infill_extra_volume="0" -s infill_line_distance="2.5" -s minimum_bottom_area="1.0" -s retraction_combing_max_distance="0" -s z_seam_x="100.0" -s cross_infill_pocket_size="2.5" -s wall_line_width_0="0.4" -s support_tree_branch_diameter="2" -s machine_steps_per_mm_y="50" -s jerk_wall="20" -s bottom_layers="6" -s material_flow_dependent_temperature="False" -s support_bottom_line_distance="0.4" -s support_wall_count="0" -s skin_edge_support_thickness="0" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s blackmagic="0" -s cool_fan_speed_0="0" -s infill_support_enabled="False" -s support_brim_line_count="20" -s wipe_pause="0" -s wipe_retraction_prime_speed="65" -s wall_min_flow="0" -s ironing_flow="10.0" -s support_conical_angle="30" -s material_break_temperature="50" -s wipe_retraction_amount="2.5" -s material_linear_advance_factor_support="0" -s wipe_hop_speed="10" -s acceleration_infill="3000" -s travel_avoid_supports="False" -s jerk_print_layer_0="20" -s material_anti_ooze_retracted_position="-4" -s acceleration_support_interface="3000" -s spaghetti_max_infill_angle="10" -s support_bottom_material_flow="100" -s ironing_enabled="False" -s acceleration_travel="5000" -s acceleration_wall="3000" -s travel_compensate_overlapping_walls_enabled="True" -s ironing_only_highest_layer="False" -s jerk_prime_tower="20" -s skin_outline_count="1" -s xy_offset_layer_0="0" -s support_xy_distance_overhang="0.2" -s resolution="0" -s skin_line_width="0.4" -s acceleration_support_bottom="3000" -s material_end_of_filament_purge_length="20" -s material_break_preparation_speed="2" -s acceleration_layer_0="3000" -s bridge_fan_speed_2="0" -s bridge_skin_material_flow_3="110" -s initial_bottom_layers="6" -s support_interface_pattern="concentric" -s machine_extruder_end_pos_x="0" -s support_tree_angle="40" -s gradual_infill_steps="0" -s speed_wall="15.0" -s support_xy_distance="0.7" -s support_join_distance="2.0" -s wipe_hop_amount="1" -s wipe_retraction_enable="True" -s material_flush_purge_speed="0.5" -s bridge_skin_speed_2="10" -s layer_start_x="0.0" -s machine_min_cool_heat_time_window="50.0" -s machine_endstop_positive_direction_z="True" -s coasting_volume="0.064" -s raft_surface_layers="2" -s skirt_brim_minimal_length="250" -s expand_skins_expand_distance="1.6" -s mesh_position_x="0" -s raft_surface_acceleration="3000" -s speed_topbottom="15.0" -s raft_smoothing="5" -s material_anti_ooze_retraction_speed="5" -s support_conical_enabled="False" -s max_extrusion_before_wipe="10" -s raft_base_line_spacing="1.6" -s speed_support_infill="30" -s conical_overhang_angle="50" -s mesh_position_z="0" -s infill_overlap_mm="0.05600000000000001" -s cool_fan_speed_min="80" -s wipe_move_distance="20" -s bridge_fan_speed_3="0" -s ironing_inset="0.2" -s machine_nozzle_cool_down_speed="2.0" -s skirt_brim_material_flow="100" -s bridge_skin_speed="10" -s conical_overhang_enabled="False" -s speed_travel_layer_0="60.0" -s retract_at_layer_change="False" -s speed_wall_x="30.0" -s jerk_layer_0="20" -s switch_extruder_extra_prime_amount="0" -s machine_endstop_positive_direction_y="False" -s jerk_support_roof="20" -s center_object="False" -s skirt_brim_line_width="0.4" -s top_bottom_pattern="lines" -s cool_fan_full_layer="2" -s z_seam_y="200" -s extruder_prime_pos_y="0" -s raft_jerk="20" -s speed_print_layer_0="12" -s support_bottom_line_width="0.4" -s cool_min_layer_time_fan_speed_max="10" -s bridge_skin_support_threshold="50" -s spaghetti_max_height="2.0" -s support_roof_density="100" -s acceleration_roofing="3000" -s retraction_hop_enabled="False" -s switch_extruder_retraction_speed="20" -s minimum_support_area="0.0" -s machine_settings="0" -s acceleration_topbottom="3000" -s wall_line_width_x="0.4" -s jerk_support="20" -s infill_randomize_start_location="False" -s skin_overlap="5" -s infill_wipe_dist="0.1" -s meshfix_union_all="True" -s support_z_distance="0.1" -s support_initial_layer_line_distance="2.6666666666666665" -s support_bottom_density="100" -s skin_material_flow="100" -s small_hole_max_size="0" -s material="0" -s infill_before_walls="True" -s shell="0" -s support_infill_angles="[ ]" -s support_interface_enable="False" -s bridge_skin_density_3="80" -s bridge_wall_material_flow="50" -s top_layers="6" -s acceleration_skirt_brim="3000" -s meshfix="0" -s cross_support_density_image="" -s z_seam_relative="False" -s slicing_tolerance="exclusive" -s machine_extruder_end_pos_y="0" -s raft_interface_line_spacing="1.0" -s material_flush_purge_length="60" -s machine_nozzle_heat_up_speed="2.0" -s wall_thickness="0.8" -s support_bottom_distance="0" -s machine_steps_per_mm_e="1600" -s material_crystallinity="False" -s speed_prime_tower="30" -s infill="0" -s spaghetti_flow="20" -s bridge_skin_speed_3="10" -s filter_out_tiny_gaps="True" -s magic_fuzzy_skin_point_dist="0.8" -s support_roof_line_distance="0.4" -s brim_line_count="12" -s material_guid="0ff92885-617b-4144-a03c-9989872454bc" -s support_roof_pattern="concentric" -s prime_tower_wipe_enabled="True" -s fill_perimeter_gaps="everywhere" -s retraction_retract_speed="65" -s zig_zaggify_infill="False" -s layer_start_y="0.0" -s extruder_prime_pos_x="0" -s bottom_skin_expand_distance="1.6" -s wall_overhang_speed_factor="100" -s jerk_support_infill="20" -s speed_ironing="10.0" -s limit_support_retractions="True" -s machine_endstop_positive_direction_x="False" -s acceleration_print="3000" -s material_linear_advance_factor_wall_x="0" -s material_final_print_temperature="202" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s roofing_angles="[ ]" -s jerk_ironing="20" -s machine_steps_per_mm_x="50" -s raft_interface_speed="11.25" -s travel_avoid_distance="0.625" -s raft_fan_speed="0" -s magic_mesh_surface_mode="normal" -s z_seam_type="sharpest_corner" -s retraction_prime_speed="65" -s material_linear_advance_factor_prime_tower="0" -s speed_support_bottom="20.0" -s material_extrusion_cool_down_speed="0.7" -s small_feature_speed_factor="50" -s switch_extruder_retraction_amount="16" -s material_maximum_park_duration="300" -s machine_nozzle_temp_enabled="True" -s skirt_brim_speed="12" -s infill_support_angle="40" -s speed_equalize_flow_max="150" -s jerk_wall_x="20" -s support_roof_angles="[ ]" -s optimize_wall_printing_order="False" -s line_width="0.4" -s zig_zaggify_support="False" -s wipe_hop_enable="False" -s speed_print="30" -s ironing_pattern="zigzag" -s speed_travel="150" -s support_angle="70" -s raft_base_speed="11.25" -s layer_0_z_overlap="0.15" -s top_bottom_thickness="0.8" -s material_initial_print_temperature="207" -s material_break_retracted_position="-50" -s jerk_skirt_brim="20" -s jerk_print="20" -s raft_base_acceleration="3000" -s retraction_extrusion_window="2.5" -s machine_extruder_start_pos_y="0" -s support_fan_enable="False" -s support_brim_width="8.0" -s machine_nozzle_head_distance="3" -s bridge_wall_coast="100" -s raft_interface_fan_speed="0" -s jerk_topbottom="20" -s prime_blob_enable="False" -s meshfix_keep_open_polygons="False" -s top_skin_expand_distance="1.6" -s acceleration_ironing="3000" -s prime_tower_flow="100" -s machine_extruder_start_pos_abs="False" -s clean_between_layers="False" -s material_linear_advance_factor_wall_0="0" -s wall_0_wipe_dist="0.2" -s skin_angles="[ ]" -s machine_steps_per_mm_z="50" -s wall_overhang_angle="90" -s cool_fan_enabled="True" -s cool_fan_speed_max="80" -s machine_extruder_end_code="" -s meshfix_maximum_deviation="0.05" -s gradual_support_infill_step_height="1" -s support_tower_roof_angle="65" -s extruder_prime_pos_z="0" -s acceleration_prime_tower="3000" -s machine_extruder_end_pos_abs="False" -s retraction_hop_after_extruder_switch_height="1" -s skirt_gap="3" -s small_feature_max_length="0.0" -s skin_overlap_mm="0.02" -s bottom_thickness="0.8" -s material_shrinkage_percentage="0" -s raft_interface_jerk="20" -s experimental="0" -s raft_base_thickness="0.36" -s retraction_hop_after_extruder_switch="True" -s support_top_distance="0.1" -s travel="0" -s acceleration_support="3000" -s support_interface_material_flow="100" -s extruder_nr="0" -s infill_overlap="14" -s raft_interface_line_width="0.8" -s material_surface_energy="100" -s material_diameter="1.75" -s bridge_skin_material_flow="60" -s material_print_temperature="217" -s magic_fuzzy_skin_point_density="1.25" -s wall_line_count="4" -s bridge_skin_material_flow_2="100" -s speed_support_interface="20.0" -s support_bottom_enable="False" -s dual="0" -s infill_multiplier="1" -s brim_width="8.0" -s wall_0_inset="0" -s magic_fuzzy_skin_thickness="0.3" -s meshfix_extensive_stitching="False" -s roofing_pattern="lines" -s wipe_brush_pos_x="100" -s machine_nozzle_id="unknown" -s acceleration_travel_layer_0="5000.0" -s support_zag_skip_count="8" -s fill_outline_gaps="False" -s machine_filament_park_distance="16" -s wall_x_material_flow="100" -s min_skin_width_for_expansion="3.67394039744206e-17" -s infill_angles="[ ]" -s support_interface_offset="0.0" -s machine_feeder_wheel_diameter="10.0" -s retraction_hop_only_when_collides="False" -s support_interface_density="100" -s coasting_enable="False" -s material_linear_advance_factor_skirt_brim="0" -s jerk_travel="30" -s material_end_of_filament_purge_speed="0.5" -s raft_margin="15" -s support_bottom_stair_step_height="0.3" -s brim_outside_only="True" -s material_standby_temperature="175" -s speed_roofing="15.0" -s ironing_line_spacing="0.1" -s infill_sparse_thickness="0.1" -s extruder_prime_pos_abs="False" -s material_adhesion_tendency="0" -s speed_support="30" -s support_line_distance="2.6666666666666665" -s retraction_enable="True" -s retraction_count_max="90" -s skirt_line_count="4" -s support_interface_height="1" -s meshfix_maximum_travel_resolution="0.8" -s cool_fan_full_at_height="0.3" -s support_brim_enable="False" -s acceleration_print_layer_0="3000" -s support_bottom_angles="[ ]" -s support_skip_zag_per_mm="20" -s support_interface_line_width="0.4" -s speed_support_roof="20.0" -s support_tree_branch_distance="1" -s meshfix_maximum_resolution="0.5" -s wipe_repeat_count="5" -s top_bottom_pattern_0="lines" -s alternate_extra_perimeter="False" -s support_roof_enable="True" -s bridge_fan_speed="100" -s support_material_flow="100" -s wall_line_width="0.4" -s raft_surface_thickness="0.1" -s cool_fan_speed="80" -s material_linear_advance_factor_wall="0" -s coasting_min_volume="0.8" -s acceleration_wall_x="3000" -s cool_min_speed="10" -s material_linear_advance_factor_support_interface="0" -s material_flow="100" -s support_offset="0" -s spaghetti_inset="0.2" -s platform_adhesion="0" -s support_bottom_stair_step_width="5.0" -s speed_z_hop="10" -s speed_layer_0="12" -s infill_enable_travel_optimization="False" -s raft_surface_speed="15.0" -s support_supported_skin_fan_speed="100" -s infill_wall_line_count="0" -s support_line_width="0.4" -s support_tower_diameter="3.0" -s machine_extruder_start_pos_x="0" -s jerk_roofing="20" -s machine_nozzle_offset_y="0" -s bridge_skin_density="100" -s raft_base_line_width="0.8" -s travel_compensate_overlapping_walls_0_enabled="True" -s bridge_enable_more_layers="True" -s support_bottom_height="1" -s raft_acceleration="3000" -s mold_angle="40" -s raft_speed="15.0" -s material_no_load_move_factor="0.940860215" -s raft_surface_line_spacing="0.4" -s roofing_material_flow="100" -s bridge_sparse_infill_max_density="0" -s support_roof_line_width="0.4" -s brim_gap="0" -s acceleration_support_infill="3000" -s support_interface_skip_height="0.3" -s mold_width="5" -s switch_extruder_retraction_speeds="20" -s jerk_infill="20" -s support_tree_collision_resolution="0.2" -s raft_base_fan_speed="0" -s material_print_temperature_layer_0="217" -s support_tree_branch_diameter_angle="5" -s infill_pattern="grid" -s connect_skin_polygons="False" -s material_break_preparation_temperature="217" -s bridge_wall_speed="10" -s support_bottom_offset="0.0" -s wall_0_material_flow="100" -s support_pattern="lines" -s raft_interface_thickness="0.15000000000000002" -s support_bottom_pattern="concentric" -s multiple_mesh_overlap="0.15" -s wipe_retraction_retract_speed="65" -s speed_equalize_flow_enabled="False" -s xy_offset="0" -s machine_extruder_cooling_fan_number="0" -s minimum_roof_area="1.0" -s roofing_line_width="0.4" -s top_thickness="0.8" -s gradual_support_infill_steps="0" -s infill_sparse_density="32" -s wipe_retraction_extra_prime_amount="0" -s cooling="0" -s small_feature_speed_factor_0="50" -s infill_line_width="0.4" -s magic_fuzzy_skin_outside_only="False" -s prime_tower_line_width="0.4" -s raft_surface_line_width="0.4" -s z_seam_corner="z_seam_corner_inner" -s retraction_amount="2.5" -s wipe_retraction_speed="65" -s raft_interface_acceleration="3000" -s raft_surface_fan_speed="0" -s spaghetti_infill_stepped="True" -s speed="0" -s support_roof_offset="0.0" -s acceleration_support_roof="3000" -s skin_edge_support_layers="0" -s support_infill_sparse_thickness="0.1" -s support_roof_height="1.2" -s initial_layer_line_width_factor="104.0" -s infill_material_flow="100" -s gradual_infill_step_height="1.5" -s cool_lift_head="False" -s speed_wall_0="15.0" -s jerk_travel_layer_0="30.0" -s support_conical_min_width="5.0" -s machine_extruder_start_code="" -s connect_infill_polygons="False" -s switch_extruder_prime_speed="20" -s default_material_print_temperature="200" -s roofing_layer_count="0" -g -e0 -l "0" -s extruder_nr="0"
2020-03-07 20:59:06,476 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-03-07 20:59:07,492 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 20:59:12,411 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 217 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-07 20:59:12,635 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-07 20:59:12,639 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-07 20:59:12,654 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [663]: Slicing took 6.8100059032440186 seconds
2020-03-07 20:59:12,655 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [664]: Number of models per buildplate: {0: 1}
2020-03-07 20:59:12,655 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [678]: See if there is more to slice...
2020-03-07 20:59:12,873 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [181]: Socket state changed to Closing
2020-03-07 20:59:12,876 - DEBUG - [MainThread] UM.Backend.Backend._onSocketError [203]: Socket debug: Arcus Error (13): Closing socket because other side requested close.
2020-03-07 20:59:12,878 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [183]: Socket state changed to Closed
2020-03-07 20:59:12,879 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onBackendQuit [829]: Backend quit with return code 0. Resetting process and socket.
2020-03-07 20:59:16,588 - DEBUG - [MainThread] LinearAdvanceSettingPlugin.LinearAdvanceSettingPlugin._filterGcode [109]: No used extruders specify a linear advance factor
2020-03-07 20:59:16,817 - ERROR - [MainThread] UM.Logger.logException [98]: Exception: Unable to write to file WDI3P_motor_holder_1p0: 'NoneType' object has no attribute 'state'
2020-03-07 20:59:16,819 - ERROR - [MainThread] UM.Logger.logException [102]: Traceback (most recent call last):
2020-03-07 20:59:16,821 - ERROR - [MainThread] UM.Logger.logException [102]:   File "/Users/ultimaker/build/4.5/build/inst/lib/python3.5/site-packages/UM/Qt/Bindings/OutputDeviceManagerProxy.py", line 135, in _writeToDevice
2020-03-07 20:59:16,824 - ERROR - [MainThread] UM.Logger.logException [102]:   File "/Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/OctoPrintOutputDevice.py", line 367, in requestWrite
2020-03-07 20:59:16,826 - ERROR - [MainThread] UM.Logger.logException [102]:     if self.activePrinter.state == "offline" and "psucontrol" in self._plugin_data and use_psu_control:
2020-03-07 20:59:16,828 - ERROR - [MainThread] UM.Logger.logException [102]: AttributeError: 'NoneType' object has no attribute 'state'
2020-03-07 20:59:16,830 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._processRequest [308]: Request [1544510674e3493f94a8c1164ea73af4] started
2020-03-07 20:59:16,833 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-07 20:59:17,488 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestFinished [369]: Request [1544510674e3493f94a8c1164ea73af4] finished.
2020-03-07 20:59:17,491 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-07 20:59:17,492 - INFO - [MainThread] SliceInfoPlugin.SliceInfo._onRequestFinished [275]: SliceInfo sent successfully
2020-03-07 20:59:17,493 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 20:59:27,505 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 20:59:37,496 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 20:59:47,524 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 20:59:57,538 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:00:07,493 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:00:18,757 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:00:28,762 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:00:33,356 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.disconnect [315]: Connection with instance BlueLeader with url http://192.168.2.171:5003/ stopped
2020-03-07 21:00:33,365 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-07 21:00:33,367 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device BlueLeader already added
2020-03-07 21:00:33,368 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [303]: Connection with instance BlueLeader with url http://192.168.2.171:5003/ started
2020-03-07 21:00:33,379 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/Resources/qml/UM/Dialog.qml:86:13: QML Loader: Binding loop detected for property "active"
2020-03-07 21:00:33,438 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device BlueLeader already added
2020-03-07 21:00:33,439 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:00:33,985 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [215]: Trying to access OctoPrint instance at http://192.168.2.171:5003/ with the provided API key.
2020-03-07 21:00:38,784 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [215]: Trying to access OctoPrint instance at http://192.168.2.171:5003/ with the provided API key.
2020-03-07 21:00:40,138 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [418]: API key accepted by OctoPrint.
2020-03-07 21:00:43,513 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:00:53,498 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:01:01,437 - DEBUG - [MainThread] LinearAdvanceSettingPlugin.LinearAdvanceSettingPlugin._filterGcode [109]: No used extruders specify a linear advance factor
2020-03-07 21:01:01,665 - ERROR - [MainThread] UM.Logger.logException [98]: Exception: Unable to write to file WDI3P_motor_holder_1p0: 'NoneType' object has no attribute 'state'
2020-03-07 21:01:01,669 - ERROR - [MainThread] UM.Logger.logException [102]: Traceback (most recent call last):
2020-03-07 21:01:01,671 - ERROR - [MainThread] UM.Logger.logException [102]:   File "/Users/ultimaker/build/4.5/build/inst/lib/python3.5/site-packages/UM/Qt/Bindings/OutputDeviceManagerProxy.py", line 135, in _writeToDevice
2020-03-07 21:01:01,673 - ERROR - [MainThread] UM.Logger.logException [102]:   File "/Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/OctoPrintOutputDevice.py", line 367, in requestWrite
2020-03-07 21:01:01,676 - ERROR - [MainThread] UM.Logger.logException [102]:     if self.activePrinter.state == "offline" and "psucontrol" in self._plugin_data and use_psu_control:
2020-03-07 21:01:01,678 - ERROR - [MainThread] UM.Logger.logException [102]: AttributeError: 'NoneType' object has no attribute 'state'
2020-03-07 21:01:01,680 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._processRequest [308]: Request [2088ecb3894b4042b22686339b4197d6] started
2020-03-07 21:01:01,683 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-07 21:01:01,900 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestFinished [369]: Request [2088ecb3894b4042b22686339b4197d6] finished.
2020-03-07 21:01:01,903 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-07 21:01:01,904 - INFO - [MainThread] SliceInfoPlugin.SliceInfo._onRequestFinished [275]: SliceInfo sent successfully
2020-03-07 21:01:03,501 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:01:13,517 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:01:23,497 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:01:33,494 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:01:37,715 - DEBUG - [MainThread] LinearAdvanceSettingPlugin.LinearAdvanceSettingPlugin._filterGcode [109]: No used extruders specify a linear advance factor
2020-03-07 21:01:38,001 - ERROR - [MainThread] UM.Logger.logException [98]: Exception: Unable to write to file WDI3P_motor_holder_1p0: 'NoneType' object has no attribute 'state'
2020-03-07 21:01:38,003 - ERROR - [MainThread] UM.Logger.logException [102]: Traceback (most recent call last):
2020-03-07 21:01:38,005 - ERROR - [MainThread] UM.Logger.logException [102]:   File "/Users/ultimaker/build/4.5/build/inst/lib/python3.5/site-packages/UM/Qt/Bindings/OutputDeviceManagerProxy.py", line 135, in _writeToDevice
2020-03-07 21:01:38,007 - ERROR - [MainThread] UM.Logger.logException [102]:   File "/Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/OctoPrintOutputDevice.py", line 367, in requestWrite
2020-03-07 21:01:38,009 - ERROR - [MainThread] UM.Logger.logException [102]:     if self.activePrinter.state == "offline" and "psucontrol" in self._plugin_data and use_psu_control:
2020-03-07 21:01:38,012 - ERROR - [MainThread] UM.Logger.logException [102]: AttributeError: 'NoneType' object has no attribute 'state'
2020-03-07 21:01:38,015 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._processRequest [308]: Request [7ec201a55e3341339a56682c27b978a8] started
2020-03-07 21:01:38,017 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-07 21:01:38,385 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestFinished [369]: Request [7ec201a55e3341339a56682c27b978a8] finished.
2020-03-07 21:01:38,388 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-07 21:01:38,388 - INFO - [MainThread] SliceInfoPlugin.SliceInfo._onRequestFinished [275]: SliceInfo sent successfully
2020-03-07 21:01:43,544 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:01:53,513 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:02:03,502 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:02:13,695 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.disconnect [315]: Connection with instance BlueLeader with url http://192.168.2.171:5003/ stopped
2020-03-07 21:02:13,704 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-07 21:02:13,707 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device BlueLeader already added
2020-03-07 21:02:13,708 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [303]: Connection with instance BlueLeader with url http://192.168.2.171:5003/ started
2020-03-07 21:02:13,722 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/Resources/qml/UM/Dialog.qml:86:13: QML Loader: Binding loop detected for property "active"
2020-03-07 21:02:13,783 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device BlueLeader already added
2020-03-07 21:02:13,783 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:02:14,336 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [215]: Trying to access OctoPrint instance at http://192.168.2.171:5003/ with the provided API key.
2020-03-07 21:02:14,784 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:02:23,497 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:02:33,549 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:02:43,493 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:02:54,783 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:03:03,517 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:03:13,502 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:03:15,525 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [215]: Trying to access OctoPrint instance at http://192.168.2.171:5003/ with the provided API key.
2020-03-07 21:03:18,147 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [418]: API key accepted by OctoPrint.
2020-03-07 21:03:23,600 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:03:26,272 - DEBUG - [MainThread] LinearAdvanceSettingPlugin.LinearAdvanceSettingPlugin._filterGcode [109]: No used extruders specify a linear advance factor
2020-03-07 21:03:26,481 - ERROR - [MainThread] UM.Logger.logException [98]: Exception: Unable to write to file WDI3P_motor_holder_1p0: 'NoneType' object has no attribute 'state'
2020-03-07 21:03:26,483 - ERROR - [MainThread] UM.Logger.logException [102]: Traceback (most recent call last):
2020-03-07 21:03:26,485 - ERROR - [MainThread] UM.Logger.logException [102]:   File "/Users/ultimaker/build/4.5/build/inst/lib/python3.5/site-packages/UM/Qt/Bindings/OutputDeviceManagerProxy.py", line 135, in _writeToDevice
2020-03-07 21:03:26,487 - ERROR - [MainThread] UM.Logger.logException [102]:   File "/Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/OctoPrintOutputDevice.py", line 367, in requestWrite
2020-03-07 21:03:26,489 - ERROR - [MainThread] UM.Logger.logException [102]:     if self.activePrinter.state == "offline" and "psucontrol" in self._plugin_data and use_psu_control:
2020-03-07 21:03:26,491 - ERROR - [MainThread] UM.Logger.logException [102]: AttributeError: 'NoneType' object has no attribute 'state'
2020-03-07 21:03:26,493 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._processRequest [308]: Request [fe88fad1f4f84c0eb2ac4cbec412d4b7] started
2020-03-07 21:03:26,495 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-07 21:03:26,679 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestFinished [369]: Request [fe88fad1f4f84c0eb2ac4cbec412d4b7] finished.
2020-03-07 21:03:26,683 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-07 21:03:26,685 - INFO - [MainThread] SliceInfoPlugin.SliceInfo._onRequestFinished [275]: SliceInfo sent successfully
2020-03-07 21:03:33,508 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:03:41,055 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.disconnect [315]: Connection with instance BlueLeader with url http://192.168.2.171:5003/ stopped
2020-03-07 21:03:41,066 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-07 21:03:41,069 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device BlueLeader already added
2020-03-07 21:03:41,070 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [303]: Connection with instance BlueLeader with url http://192.168.2.171:5003/ started
2020-03-07 21:03:41,081 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/Resources/qml/UM/Dialog.qml:86:13: QML Loader: Binding loop detected for property "active"
2020-03-07 21:03:41,122 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device BlueLeader already added
2020-03-07 21:03:41,122 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:03:41,655 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [215]: Trying to access OctoPrint instance at http://192.168.2.171:5003/ with the provided API key.
2020-03-07 21:03:47,573 - WARNING - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [371]: Start polling for AppKeys decision
2020-03-07 21:03:50,707 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [396]: AppKey granted
2020-03-07 21:03:51,529 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:04:01,610 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:04:07,399 - WARNING - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [371]: Start polling for AppKeys decision
2020-03-07 21:04:10,508 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [396]: AppKey granted
2020-03-07 21:04:11,572 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:04:21,521 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:04:21,533 - WARNING - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [371]: Start polling for AppKeys decision
2020-03-07 21:04:25,199 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [396]: AppKey granted
2020-03-07 21:04:31,517 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:04:41,514 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:04:51,527 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:05:01,829 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:05:11,826 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:05:12,505 - WARNING - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [371]: Start polling for AppKeys decision
2020-03-07 21:05:16,010 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [396]: AppKey granted
2020-03-07 21:05:21,557 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:05:31,535 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:05:41,530 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:05:48,508 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [215]: Trying to access OctoPrint instance at http://192.168.2.171:5003/ with the provided API key.
2020-03-07 21:05:48,594 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [418]: API key accepted by OctoPrint.
2020-03-07 21:05:51,534 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:05:57,000 - DEBUG - [MainThread] LinearAdvanceSettingPlugin.LinearAdvanceSettingPlugin._filterGcode [109]: No used extruders specify a linear advance factor
2020-03-07 21:05:57,219 - ERROR - [MainThread] UM.Logger.logException [98]: Exception: Unable to write to file WDI3P_motor_holder_1p0: 'NoneType' object has no attribute 'state'
2020-03-07 21:05:57,221 - ERROR - [MainThread] UM.Logger.logException [102]: Traceback (most recent call last):
2020-03-07 21:05:57,224 - ERROR - [MainThread] UM.Logger.logException [102]:   File "/Users/ultimaker/build/4.5/build/inst/lib/python3.5/site-packages/UM/Qt/Bindings/OutputDeviceManagerProxy.py", line 135, in _writeToDevice
2020-03-07 21:05:57,226 - ERROR - [MainThread] UM.Logger.logException [102]:   File "/Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/OctoPrintOutputDevice.py", line 367, in requestWrite
2020-03-07 21:05:57,229 - ERROR - [MainThread] UM.Logger.logException [102]:     if self.activePrinter.state == "offline" and "psucontrol" in self._plugin_data and use_psu_control:
2020-03-07 21:05:57,232 - ERROR - [MainThread] UM.Logger.logException [102]: AttributeError: 'NoneType' object has no attribute 'state'
2020-03-07 21:05:57,235 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._processRequest [308]: Request [5a20570fb6014e7c96cc01847f3887dc] started
2020-03-07 21:05:57,237 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-07 21:05:57,925 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestFinished [369]: Request [5a20570fb6014e7c96cc01847f3887dc] finished.
2020-03-07 21:05:57,929 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-07 21:05:57,929 - INFO - [MainThread] SliceInfoPlugin.SliceInfo._onRequestFinished [275]: SliceInfo sent successfully
2020-03-07 21:06:01,517 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:06:02,185 - DEBUG - [MainThread] cura.TaskManagement.OnExitCallbackManager.triggerNextCallback [51]: No more on-app-exit callbacks to process. Tell the app to exit.
2020-03-07 21:06:02,195 - INFO - [MainThread] cura.CuraApplication.closeApplication [592]: Close application
2020-03-07 21:06:02,201 - DEBUG - [MainThread] UM.Qt.QtApplication.windowClosed [462]: Shutting down cura
2020-03-07 21:06:02,243 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._terminate [292]: Attempting to kill the engine process
2020-03-07 21:06:07,724 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin FileLogger
2020-03-07 21:06:07,729 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin LegacyProfileReader
2020-03-07 21:06:07,734 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin AMFReader
2020-03-07 21:06:07,740 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin SimpleView
2020-03-07 21:06:07,748 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin SolidView
2020-03-07 21:06:07,756 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin FirmwareUpdateChecker
2020-03-07 21:06:07,762 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin SentryLogger
2020-03-07 21:06:07,769 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin SupportEraser
2020-03-07 21:06:07,775 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin PrepareStage
2020-03-07 21:06:07,824 - WARNING - [MainThread] UM.PluginRegistry.loadPlugin [412]: Plugin [CuraInventorPlugin] with supported sdk versions [['5.0.0', '6.0.0', '6.1.0', '5.0.0']] is incompatible with the current sdk version [7.1.0].
2020-03-07 21:06:07,831 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin LinearAdvanceSettingPlugin
2020-03-07 21:06:07,836 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin VersionInTitlebarPlugin
2020-03-07 21:06:07,842 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin OrientationPlugin
2020-03-07 21:06:07,861 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin OctoPrintPlugin
2020-03-07 21:06:07,866 - DEBUG - [MainThread] SidebarGUIPlugin.__matchVersion [48]: This version of the plugin is not compatible with this version of Cura. Please check for an update.
2020-03-07 21:06:07,867 - WARNING - [MainThread] SidebarGUIPlugin.register [23]: Plugin not loaded because of a version mismatch
2020-03-07 21:06:07,869 - WARNING - [MainThread] UM.PluginRegistry.loadPlugin [419]: Plugin SidebarGUIPlugin did not return any objects to register
2020-03-07 21:06:07,876 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin MeshTools
2020-03-07 21:06:07,881 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin ZOffsetPlugin
2020-03-07 21:06:07,887 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin CustomSupports
2020-03-07 21:06:07,895 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin MaterialSettingsPlugin
2020-03-07 21:06:07,900 - DEBUG - [MainThread] UM.PluginRegistry.loadPlugins [369]: Loading all plugins took 0.8638501167297363 seconds
2020-03-07 21:06:07,918 - INFO - [MainThread] UM.VersionUpgradeManager.upgrade [148]: Looking for old configuration files to upgrade.
2020-03-07 21:06:08,017 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-07 21:06:08,020 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-07 21:06:08,023 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-07 21:06:08,026 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-07 21:06:08,030 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-07 21:06:08,033 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-07 21:06:08,036 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-07 21:06:08,039 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-07 21:06:08,042 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-07 21:06:08,045 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-07 21:06:08,048 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-07 21:06:08,052 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-07 21:06:08,055 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-07 21:06:08,143 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ../3D4MakersFacilanC8/3d4makers_facilan_c8.xml.fdm_material, skip it
2020-03-07 21:06:11,937 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.loadAllMetadata [330]: Loading metadata into container registry took 3.6198971271514893 seconds
2020-03-07 21:06:12,103 - DEBUG - [MainThread] cura.Scene.CuraSceneController.setActiveBuildPlate [111]: Select build plate: 0
2020-03-07 21:06:12,107 - INFO - [MainThread] cura.CuraApplication.run [761]: Initializing machine error checker
2020-03-07 21:06:12,176 - INFO - [MainThread] cura.UI.MachineActionManager.addDefaultMachineActions [72]: Default machine actions added for machine definition [wanhao_i3plus]
2020-03-07 21:06:12,668 - INFO - [MainThread] cura.Settings.GlobalStack.addExtruder [184]: Extruder[wanhao_i3plus_extruder_0 #5] added to [RedLeader] at position [0]
2020-03-07 21:06:12,670 - WARNING - [MainThread] cura.Settings.ExtruderManager.registerExtruder [156]: Extruder [wanhao_i3plus_extruder_0 #5] has already been registered on machine [RedLeader], not doing anything
2020-03-07 21:06:12,672 - INFO - [MainThread] FirmwareUpdateChecker.FirmwareUpdateChecker.checkFirmwareVersion [74]: No machine with name Wanhao Duplicator i3 Plus in list of firmware to check.
2020-03-07 21:06:12,811 - DEBUG - [MainThread] cura.Machines.ContainerTree.__getitem__ [106]: Adding container tree for wanhao_i3plus took 0.12543010711669922 seconds.
2020-03-07 21:06:12,815 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: BQ_PauseAtHeight
2020-03-07 21:06:12,815 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: ChangeAtZ
2020-03-07 21:06:12,816 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: ColorMix
2020-03-07 21:06:12,817 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: DisplayFilenameAndLayerOnLCD
2020-03-07 21:06:12,818 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: DisplayRemainingTimeOnLCD
2020-03-07 21:06:12,818 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: FilamentChange
2020-03-07 21:06:12,819 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: InsertAtLayerChange
2020-03-07 21:06:12,820 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: PauseAtHeight
2020-03-07 21:06:12,821 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: PauseAtHeightRepRapFirmwareDuet
2020-03-07 21:06:12,822 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: PauseAtHeightforRepetier
2020-03-07 21:06:12,822 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: RetractContinue
2020-03-07 21:06:12,823 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: SearchAndReplace
2020-03-07 21:06:12,824 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: Stretch
2020-03-07 21:06:12,824 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: TimeLapse
2020-03-07 21:06:12,825 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: UsePreviousProbeMeasurements
2020-03-07 21:06:12,934 - INFO - [MainThread] cura.CuraApplication.run [766]: Initializing machine manager
2020-03-07 21:06:12,950 - INFO - [MainThread] cura.CuraApplication.run [771]: Initializing container manager
2020-03-07 21:06:13,049 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-07 21:06:13,057 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [303]: Connection with instance BlueLeader with url http://192.168.2.171:5003/ started
2020-03-07 21:06:13,092 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device BlueLeader already added
2020-03-07 21:06:13,095 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:06:13,107 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [135]: New error check scheduled.
2020-03-07 21:06:13,143 - DEBUG - [MainThread] UM.Scene.Camera._preferencesChanged [246]: Changing perspective mode to perspective.
2020-03-07 21:06:13,632 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [158]: Loading theme file: /Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/themes/cura-dark/theme.json
2020-03-07 21:06:13,635 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [158]: Loading theme file: /Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/themes/cura-light/theme.json
2020-03-07 21:06:13,749 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [231]: Loaded theme /Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/themes/cura-light
2020-03-07 21:06:13,752 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [231]: Loaded theme /Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/themes/cura-dark
2020-03-07 21:06:14,176 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin._createView [304]: Creating post processing plugin view.
2020-03-07 21:06:14,275 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin._createView [314]: Post processing view created.
2020-03-07 21:06:14,406 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._parseJWT [91]: There was no auth data or access token
2020-03-07 21:06:14,408 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._parseJWT [91]: There was no auth data or access token
2020-03-07 21:06:14,411 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._parseJWT [91]: There was no auth data or access token
2020-03-07 21:06:14,413 - WARNING - [MainThread] UM.Qt.Bindings.Theme.getImage [133]: No image header_pattern defined in Theme
2020-03-07 21:06:14,853 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-07 21:06:14,857 - WARNING - [MainThread] UM.Decorators.deprecated_function [20]: <function GlobalStack.extruders at 0x600007dd1a88> is deprecated (since 4.4): Please use extruderList instead.
2020-03-07 21:06:14,986 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:125:27: Unable to assign [undefined] to int
2020-03-07 21:06:14,988 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:76:29: Unable to assign null to double
2020-03-07 21:06:14,996 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._createAdditionalComponentsView [350]: Creating additional ui components for OctoPrint-connected printers.
2020-03-07 21:06:15,003 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/Resources/qml/QtQuick/Controls/Button.qml:99: TypeError: Cannot read property of null
2020-03-07 21:06:15,005 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/OctoPrintComponents.qml:25:16: Unable to assign [undefined] to QQmlComponent*
2020-03-07 21:06:15,007 - DEBUG - [MainThread] MaterialSettingsPlugin.MaterialSettingsPlugin._onEngineCreated [64]: Replacing Materials preferencepane with patched version
2020-03-07 21:06:15,014 - DEBUG - [MainThread] UM.Controller.setActiveStage [149]: Setting active stage to PrepareStage
2020-03-07 21:06:15,143 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-07 21:06:15,215 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-07 21:06:15,219 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-07 21:06:15,221 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/plugins/plugins/PrepareStage/PrepareMain.qml:16:5: QML ActionPanelWidget: Binding loop detected for property "width"
2020-03-07 21:06:15,224 - DEBUG - [MainThread] UM.Controller.setActiveView [91]: Setting active view to SolidView
2020-03-07 21:06:15,236 - DEBUG - [MainThread] SliceInfoPlugin.SliceInfo._createDialog [71]: Creating dialog [MoreInfoWindow.qml]
2020-03-07 21:06:15,250 - DEBUG - [MainThread] ModelChecker.ModelChecker._createView [109]: Creating model checker view.
2020-03-07 21:06:15,256 - DEBUG - [MainThread] ModelChecker.ModelChecker._createView [118]: Model checker view created.
2020-03-07 21:06:15,258 - DEBUG - [MainThread] Toolbox.src.Toolbox._makeRequestByType [536]: Requesting [updates] metadata from server.
2020-03-07 21:06:15,261 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.getAccessToken [114]: No auth data to retrieve the access_token from
2020-03-07 21:06:15,263 - WARNING - [MainThread] UM.Logger.warning [117]: Cannot add authorization to Cloud Api request
2020-03-07 21:06:15,382 - DEBUG - [MainThread] cura.CuraApplication.run [809]: Booting Cura took 8.644234895706177 seconds
2020-03-07 21:06:15,707 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._processRequest [308]: Request [bde1277ba88c4c8190ab078dd433d400] started
2020-03-07 21:06:15,709 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-07 21:06:15,711 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-07 21:06:15,730 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-07 21:06:15,743 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-07 21:06:15,750 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-07 21:06:15,758 - INFO - [MainThread] FirmwareUpdateChecker.FirmwareUpdateChecker.checkFirmwareVersion [74]: No machine with name Monoprice Select Mini V2 (E3D) in list of firmware to check.
2020-03-07 21:06:15,761 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-07 21:06:15,768 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-07 21:06:15,776 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-07 21:06:15,783 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-07 21:06:15,798 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-07 21:06:15,811 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [63]: Updating QualityProfilesDropDownMenuModel.
2020-03-07 21:06:16,423 - DEBUG - [MainThread] UM.Qt.QtRenderer._initialize [188]: Support for Vertex Array Objects: True
2020-03-07 21:06:16,427 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [111]: Initialized OpenGL subsystems.
2020-03-07 21:06:16,429 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [112]: OpenGL Version:  4.1 INTEL-14.4.23
2020-03-07 21:06:16,432 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [113]: OpenGL Vendor:   Intel Inc.
2020-03-07 21:06:16,434 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [114]: OpenGL Renderer: Intel(R) Iris(TM) Plus Graphics 655
2020-03-07 21:06:16,441 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [115]: GLSL Version:    4.10.0
2020-03-07 21:06:16,461 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/default.shader]...
2020-03-07 21:06:16,500 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/selection.shader]...
2020-03-07 21:06:16,551 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/select_face.shader]...
2020-03-07 21:06:16,584 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/default.shader]...
2020-03-07 21:06:16,623 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/composite.shader]...
2020-03-07 21:06:16,674 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/overhang.shader]...
2020-03-07 21:06:16,714 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/striped.shader]...
2020-03-07 21:06:16,753 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/transparent_object.shader]...
2020-03-07 21:06:16,786 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/striped.shader]...
2020-03-07 21:06:16,816 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/default.shader]...
2020-03-07 21:06:16,855 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/grid.shader]...
2020-03-07 21:06:16,901 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/platform.shader]...
2020-03-07 21:06:17,213 - DEBUG - [Thread-3] cura.Machines.ContainerTree.__getitem__ [106]: Adding container tree for monoprice_select_mini_v2 took 0.8166449069976807 seconds.
2020-03-07 21:06:17,618 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-07 21:06:17,626 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [63]: Updating QualityProfilesDropDownMenuModel.
2020-03-07 21:06:18,086 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestFinished [369]: Request [bde1277ba88c4c8190ab078dd433d400] finished.
2020-03-07 21:06:18,090 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-07 21:06:18,157 - INFO - [MainThread] cura.Machines.MachineErrorChecker._setResult [187]: Error check finished, result = False, time = 5.1s
2020-03-07 21:06:23,559 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:06:27,499 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-03-07 21:06:33,517 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:06:43,623 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:06:53,519 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:07:03,616 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:07:13,528 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:07:23,627 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:07:33,536 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:07:43,535 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:07:53,556 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:08:03,516 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:08:13,514 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:08:23,522 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:08:33,621 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:08:43,511 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:08:53,521 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:09:03,528 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:09:13,597 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:09:23,522 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:09:33,520 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:09:43,525 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:09:53,518 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:10:03,611 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:10:13,519 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:10:23,619 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:10:33,525 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:10:42,991 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/Resources/qml/UM/Dialog.qml:86:13: QML Loader: Binding loop detected for property "active"
2020-03-07 21:10:43,522 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:10:43,549 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [215]: Trying to access OctoPrint instance at http://192.168.2.171:5003/ with the provided API key.
2020-03-07 21:10:45,165 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.disconnect [315]: Connection with instance BlueLeader with url http://192.168.2.171:5003/ stopped
2020-03-07 21:10:45,174 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/DiscoverOctoPrintAction.qml:522: TypeError: Cannot call method 'getId' of undefined
2020-03-07 21:10:45,692 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/DiscoverOctoPrintAction.qml:373: TypeError: Cannot read property 'baseURL' of undefined
2020-03-07 21:10:55,506 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-03-07 21:11:23,105 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-07 21:11:23,110 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device BlueLeader already added
2020-03-07 21:11:23,112 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [303]: Connection with instance BlueLeader with url http://192.168.2.171:5003/ started
2020-03-07 21:11:23,155 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device BlueLeader already added
2020-03-07 21:11:23,156 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:11:23,671 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [215]: Trying to access OctoPrint instance at http://192.168.2.171:5003/ with the provided API key.
2020-03-07 21:11:26,539 - WARNING - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [371]: Start polling for AppKeys decision
2020-03-07 21:11:29,521 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [396]: AppKey granted
2020-03-07 21:11:33,506 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-03-07 21:11:33,544 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:11:43,635 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:11:53,618 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:12:03,526 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:12:13,530 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:12:23,525 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:12:33,783 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:12:43,529 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:12:53,536 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:14:32,243 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:14:33,529 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:14:43,534 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:14:53,525 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:15:03,529 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:15:13,534 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:15:23,525 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:15:33,536 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:15:43,545 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:15:53,549 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:16:03,558 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:16:13,543 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:16:23,525 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:16:33,521 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:16:43,540 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:16:53,521 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:17:03,528 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:17:13,534 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:17:23,541 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:17:33,550 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:17:43,541 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:17:53,518 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:18:03,534 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:18:13,621 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:18:23,529 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:18:33,522 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:18:43,527 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:18:53,522 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:19:03,530 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:19:13,536 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:19:23,533 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:19:33,536 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:19:43,634 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:19:53,523 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:20:03,527 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:20:13,532 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:20:23,525 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:20:33,528 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:20:43,538 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:20:53,626 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:21:03,534 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:21:13,526 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:21:23,540 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:21:33,525 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:21:43,547 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:21:53,528 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:22:03,530 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:22:13,561 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:22:23,526 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:22:33,544 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:22:43,542 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:22:53,533 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:23:03,681 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:23:13,529 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:23:23,534 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:23:33,550 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:23:43,530 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:23:53,697 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:24:03,540 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:24:13,535 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:24:23,882 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:24:33,543 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:24:43,536 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:24:53,595 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:25:03,565 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:25:13,572 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:25:23,543 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:25:33,534 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:25:43,538 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:25:53,533 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:26:03,547 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:26:13,547 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:26:23,541 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:26:33,553 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:26:43,540 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:26:53,543 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:27:03,550 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:27:13,540 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:27:23,534 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:27:33,539 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:27:43,699 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:27:53,538 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:28:03,545 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:28:13,546 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:28:23,544 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:28:33,752 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:28:43,537 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:28:53,551 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:29:03,545 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:29:13,541 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:29:23,543 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:29:33,540 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:29:43,644 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:29:53,574 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:30:03,541 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:30:13,545 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:30:23,706 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:30:33,547 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:30:43,549 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:30:53,556 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:31:03,538 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:31:13,548 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:31:23,550 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:31:33,532 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:31:43,589 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:31:53,545 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:32:03,544 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:32:13,542 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:32:23,551 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:32:33,551 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:32:43,549 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:32:53,544 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:33:03,550 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:33:13,535 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:33:42,035 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:34:02,138 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:34:22,327 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:34:42,649 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:35:02,430 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:35:22,602 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:35:42,811 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:36:02,904 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:36:22,998 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:36:45,052 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:37:05,188 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:37:25,239 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:37:45,265 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:38:05,404 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:38:25,447 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:38:45,496 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:39:05,505 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:39:05,559 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:39:25,645 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:39:45,789 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:40:05,942 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:40:26,045 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:40:46,069 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:41:08,067 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:41:28,208 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:41:48,347 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:42:08,558 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:42:08,609 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:42:28,650 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:42:40,904 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:43:00,955 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:43:21,004 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:43:41,018 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:44:03,146 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:44:23,258 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:44:43,354 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:45:03,524 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:45:03,570 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:45:23,703 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:45:43,758 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:46:03,871 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:46:23,904 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:46:43,955 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:47:04,006 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:47:24,076 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:47:44,155 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:48:04,330 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:48:24,321 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:48:44,415 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:49:04,560 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:49:24,604 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:49:44,616 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:50:04,920 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:50:25,064 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:50:45,065 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:51:05,162 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:51:25,212 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:51:45,261 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:52:05,272 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:52:25,311 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:52:47,224 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:53:07,375 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:53:19,830 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:53:43,625 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:54:03,775 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:54:23,889 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:54:43,926 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:55:04,028 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:55:24,131 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:55:44,138 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:56:04,178 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:56:24,292 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:56:44,329 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:57:04,440 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:57:24,532 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:57:44,543 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:58:04,543 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:58:04,635 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:58:24,638 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:58:44,746 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:59:04,936 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:59:24,994 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 21:59:47,094 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:00:07,297 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:00:27,445 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:00:47,579 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:01:07,598 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:01:27,633 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:01:47,623 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:02:07,698 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:02:27,741 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:02:47,803 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:03:07,848 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:03:34,132 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:03:54,190 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:04:14,285 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:04:34,306 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:04:50,471 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:05:10,548 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:05:30,651 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:05:50,751 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:06:11,047 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:06:30,898 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:06:50,923 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:07:11,044 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:07:31,150 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:08:01,613 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:08:21,752 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:08:41,699 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:09:01,751 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:09:21,803 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:09:41,850 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:10:01,929 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:10:22,049 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:10:42,130 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:11:02,252 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:11:22,261 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:11:42,507 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:12:02,400 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:12:22,412 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:12:42,505 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:12:52,747 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:13:18,606 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:13:38,717 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:13:58,733 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:14:18,749 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:14:38,811 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:14:58,886 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:15:19,020 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:15:38,944 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:15:58,973 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:16:19,007 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:16:39,057 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:16:59,084 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:17:19,128 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:17:39,171 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:17:59,165 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:18:19,235 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:18:39,282 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:18:59,336 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:19:19,425 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:19:39,527 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:19:59,534 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:20:19,678 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:20:39,866 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:20:59,978 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:21:19,977 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:21:40,089 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:22:00,130 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:22:20,228 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:22:40,386 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:23:00,394 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:23:20,479 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:23:40,481 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:24:00,583 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:24:20,834 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:24:40,945 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:25:00,993 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:25:21,046 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:25:41,099 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:26:01,187 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:26:21,185 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:26:41,297 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:27:01,349 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:27:21,399 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:27:41,600 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:27:41,988 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:28:02,151 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:28:17,746 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:28:37,879 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:28:57,972 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:29:17,980 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:29:38,162 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:29:58,076 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:30:18,149 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:30:38,247 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:30:58,208 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:31:18,255 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:31:38,327 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:31:58,355 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:32:18,437 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:32:38,471 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:32:58,499 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:33:18,526 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:33:38,584 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:33:58,662 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:34:18,703 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:34:38,742 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:34:58,936 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:35:18,782 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:35:38,876 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:35:58,906 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:36:19,143 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:36:39,317 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:36:59,226 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:37:19,291 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:37:39,376 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:37:59,410 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:38:19,494 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:38:39,526 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:38:59,560 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:39:19,576 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:39:39,646 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:39:59,713 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:40:19,821 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:40:39,836 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:40:59,882 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:41:19,883 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:41:39,912 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:41:59,912 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:42:19,969 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:42:39,976 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:43:00,006 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:43:20,081 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:43:40,099 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:44:00,158 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:44:20,199 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:44:40,419 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:45:00,495 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:45:20,532 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:45:40,605 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:46:00,613 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:46:20,673 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:46:40,730 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:47:00,796 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:47:20,815 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:47:40,841 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:48:00,910 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:48:20,935 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:48:40,972 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:49:00,979 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:49:21,052 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:49:41,084 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:50:01,160 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:50:21,167 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:50:41,235 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:51:01,252 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:51:21,285 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:51:41,351 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:52:01,382 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:52:21,408 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:52:41,491 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:53:01,514 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:53:21,539 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:53:41,552 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:54:01,596 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:54:21,622 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:54:41,673 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:55:01,691 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:55:21,711 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:55:41,725 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:56:01,805 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:56:21,947 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:56:41,971 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:57:01,995 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:57:22,028 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:57:42,059 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:58:02,092 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:58:22,141 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:58:42,143 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:59:02,184 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:59:22,214 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 22:59:42,242 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:00:02,366 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:00:22,442 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:00:42,457 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:01:02,643 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:01:22,728 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:01:42,766 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:02:02,840 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:02:22,870 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:02:42,994 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:03:03,083 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:03:23,111 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:03:43,184 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:04:03,263 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:04:23,278 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:04:43,363 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:05:03,372 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:05:23,438 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:05:43,484 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:06:03,675 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:06:23,539 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:06:43,606 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:07:03,628 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:07:23,647 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:07:23,704 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:07:43,739 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:08:11,657 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:08:38,762 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:08:58,833 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:09:19,016 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:09:38,934 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:09:59,002 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:10:19,020 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:10:39,088 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:10:59,142 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:11:19,454 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:11:37,042 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:11:57,093 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:12:17,153 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:12:37,176 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:12:57,365 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:13:17,274 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:13:34,129 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:13:56,160 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:14:16,261 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:14:36,291 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:14:56,316 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:15:16,371 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:15:36,453 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:15:56,475 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:16:21,512 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:16:41,769 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:17:01,877 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:17:21,931 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:17:42,084 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:18:02,094 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:18:22,134 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:18:42,383 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:19:02,485 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:19:22,544 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:19:42,584 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:19:45,686 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:20:05,734 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:20:25,697 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:20:45,787 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:21:05,863 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:21:25,889 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:21:45,913 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:22:05,940 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:22:26,049 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:22:46,164 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:23:06,047 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:23:26,132 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:23:46,153 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:24:06,222 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:24:26,286 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:24:46,361 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:25:06,409 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:25:26,424 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:25:46,454 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:26:06,524 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:26:26,767 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:26:26,795 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:26:46,849 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:27:06,881 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:27:26,905 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:27:46,983 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:28:07,040 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:28:27,050 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:28:47,120 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:29:00,054 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:29:20,076 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:29:40,161 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:30:00,185 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:30:20,205 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:30:40,222 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:31:00,284 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:31:20,307 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:31:40,566 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:32:00,633 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:32:20,670 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:32:40,700 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:33:00,730 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:33:20,786 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:33:40,794 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:34:00,879 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:34:20,913 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:34:40,936 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:35:01,015 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:35:21,046 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:35:41,082 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:36:01,111 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:36:21,134 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:36:41,309 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:37:01,353 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:37:21,423 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:37:41,455 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:38:01,474 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:38:21,497 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:38:41,582 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:39:01,621 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:39:21,641 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:39:41,703 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:40:01,775 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:40:21,822 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:40:41,849 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:41:01,856 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:41:21,915 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:41:41,971 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:42:01,980 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:42:22,007 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:42:42,063 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:43:02,134 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:43:22,211 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:43:42,290 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:44:02,316 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:44:12,392 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:44:32,414 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:44:52,426 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:45:12,496 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:45:32,533 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:45:52,539 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:46:12,605 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:46:32,606 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:46:52,659 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:46:52,702 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:47:12,715 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:47:32,775 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:47:52,789 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:48:12,792 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:48:32,870 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:48:52,879 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:49:12,950 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:49:26,115 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:49:46,160 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:50:06,187 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:50:26,220 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:50:46,237 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:51:06,304 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:51:26,318 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:51:46,447 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:52:06,512 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:52:26,579 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:52:46,591 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:53:06,668 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:53:26,705 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:53:46,729 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:54:08,695 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:54:28,779 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:54:48,801 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:55:08,862 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:55:28,927 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:55:48,983 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:56:09,002 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:56:29,018 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:56:49,077 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:57:09,046 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:57:29,057 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:57:49,120 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:58:09,201 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:58:29,225 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:58:49,248 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:59:09,314 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:59:29,335 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-07 23:59:49,405 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:00:09,453 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:00:29,474 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:00:49,499 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:01:09,521 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:01:25,944 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:01:46,193 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:02:06,035 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:02:26,104 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:02:46,229 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:03:06,295 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:03:26,322 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:03:46,356 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:04:06,385 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:04:26,412 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:04:46,447 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:05:06,466 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:05:26,490 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:05:46,558 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:06:06,634 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:06:26,671 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:06:46,813 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:07:06,715 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:07:06,767 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:07:26,810 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:07:46,817 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:08:06,880 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:08:26,960 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:08:46,965 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:09:07,031 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:09:27,099 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:09:47,117 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:10:07,184 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:10:27,217 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:10:47,243 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:11:07,316 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:11:27,348 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:11:56,758 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:12:16,845 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:12:36,872 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:12:56,945 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:13:17,008 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:13:40,185 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:14:00,255 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:14:20,314 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:14:40,298 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:15:00,416 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:15:18,103 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:15:38,150 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:15:58,142 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:16:18,227 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:16:38,247 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:16:58,399 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:17:18,468 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:17:28,832 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:17:52,815 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:18:12,921 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:18:32,939 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:18:52,984 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:19:12,989 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:19:33,017 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:19:53,078 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:20:13,121 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:20:33,128 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:20:53,253 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:21:13,210 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:21:33,387 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:21:53,309 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:22:13,354 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:22:33,363 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:22:53,686 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:23:13,758 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:23:33,842 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:23:53,871 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:24:13,887 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:24:33,962 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:24:53,995 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:25:14,037 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:25:34,057 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:25:54,070 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:26:14,139 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:26:34,159 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:26:54,251 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:27:14,338 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:27:34,289 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:27:54,420 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:28:14,392 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:28:34,405 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:28:54,465 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:29:14,496 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:29:34,526 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:29:54,559 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:30:14,601 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:30:34,619 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:30:54,693 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:31:14,711 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:31:14,758 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:31:34,791 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:31:54,856 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:32:14,884 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:32:34,948 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:32:55,142 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:33:15,023 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:33:35,090 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:33:55,102 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:34:15,142 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:34:35,173 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:34:55,194 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:35:15,194 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:35:35,248 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:35:55,334 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:36:15,443 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:36:35,473 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:36:55,501 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:37:15,560 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:37:35,532 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:37:55,671 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:38:15,583 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:38:35,598 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:38:55,656 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:39:15,738 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:39:15,764 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:39:35,782 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:39:55,854 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:40:15,926 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:40:36,004 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:40:56,026 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:41:16,070 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:41:36,076 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:41:56,145 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:42:16,180 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:42:36,220 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:42:56,299 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:43:16,381 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:43:31,203 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:43:51,291 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:44:11,304 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:44:31,366 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:44:51,384 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:45:11,403 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:45:31,480 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:45:51,545 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:46:11,576 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:46:31,592 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:46:51,613 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:47:11,687 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:47:21,802 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:47:41,877 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:48:01,953 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:48:21,968 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:48:42,040 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:49:02,048 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:49:22,077 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:49:42,085 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:50:02,132 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:50:22,203 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:50:42,220 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:51:11,223 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:51:31,288 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:51:51,343 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:52:11,429 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:52:31,622 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:52:51,460 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:53:11,508 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:53:31,576 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:53:51,597 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:54:11,643 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:54:31,652 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:54:51,690 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:55:11,700 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:55:31,789 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:55:51,792 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:56:11,866 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:56:31,945 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:56:51,965 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:57:11,990 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:57:32,248 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:57:52,318 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:58:12,396 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:58:32,430 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:58:52,465 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:59:12,499 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:59:32,518 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 00:59:52,593 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:00:12,601 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:00:25,378 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:00:45,414 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:01:05,450 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:01:25,460 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:01:45,478 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:02:05,486 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:02:25,566 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:02:45,591 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:03:05,596 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:03:25,654 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:03:45,707 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:04:05,777 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:04:25,798 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:04:45,866 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:05:05,927 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:05:25,964 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:05:46,026 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:06:06,029 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:06:26,120 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:06:46,143 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:07:06,220 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:07:26,240 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:07:46,596 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:08:06,296 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:08:26,373 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:08:46,404 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:09:06,438 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:09:26,466 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:09:46,475 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:10:06,588 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:10:26,614 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:10:46,694 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:11:06,754 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:11:26,823 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:11:46,894 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:12:06,920 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:12:26,957 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:12:47,127 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:13:07,012 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:13:27,080 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:13:47,117 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:14:07,148 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:14:27,168 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:14:47,248 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:15:07,316 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:15:27,343 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:15:47,422 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:16:07,438 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:16:27,475 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:16:47,496 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:17:07,537 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:17:27,548 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:17:44,927 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:18:08,773 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:18:28,875 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:18:48,897 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:19:08,978 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:19:32,206 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:19:52,272 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:20:12,329 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:20:32,411 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:20:52,442 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:21:12,479 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:21:32,494 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:22:02,807 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:22:22,849 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:22:42,878 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:23:02,912 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:23:22,929 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:23:42,965 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:24:02,980 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:24:23,058 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:24:43,080 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:25:03,110 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:25:23,131 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:25:35,575 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:25:52,810 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:26:02,887 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:26:31,294 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:26:51,391 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:27:11,406 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:27:31,441 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:27:51,464 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:28:11,482 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:28:31,594 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:28:51,590 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:29:11,645 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:29:31,703 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:29:51,732 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:30:11,766 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:30:31,783 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:30:51,869 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:31:11,883 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:31:31,970 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:31:52,053 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:32:12,081 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:32:32,100 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:32:52,170 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:33:12,374 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:33:32,210 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:33:52,222 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:34:12,234 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:34:32,250 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:34:52,277 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:35:12,291 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:35:32,303 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:35:46,821 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:36:06,857 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:36:26,887 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:36:46,918 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:37:06,935 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:37:27,015 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:37:47,098 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:38:07,101 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:38:27,171 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:38:47,208 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:39:07,232 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:39:27,284 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:39:47,321 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:40:07,336 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:40:27,401 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:40:47,435 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:41:07,507 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:41:27,525 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:41:47,550 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:42:07,579 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:42:27,621 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:42:47,680 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:43:07,707 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:43:27,738 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:43:47,775 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:44:09,803 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:44:29,908 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:44:49,940 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:45:09,954 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:45:30,187 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:45:50,249 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:46:10,292 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:46:30,326 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:46:50,359 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:47:10,389 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:47:30,387 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:47:38,637 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:47:58,886 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:48:18,947 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:48:39,036 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:48:59,064 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:49:19,088 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:49:39,143 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:49:59,216 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:50:19,246 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:50:39,276 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:50:59,279 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:51:19,356 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:51:39,379 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:51:59,472 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:52:19,471 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:52:29,402 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:52:49,438 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:53:09,477 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:53:29,494 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:53:49,557 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:54:09,636 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:54:29,685 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:54:49,743 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:55:09,798 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:55:29,816 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:55:49,923 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:56:09,934 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:56:30,084 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:56:50,044 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:57:10,067 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:57:30,114 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:57:50,118 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:58:10,197 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:58:30,217 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:58:50,239 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:59:10,318 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:59:30,333 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 01:59:50,410 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:00:10,486 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:00:30,496 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:00:50,566 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:01:10,576 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:01:30,653 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:01:50,678 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:02:10,753 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:02:30,743 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:02:50,809 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:03:10,837 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:03:30,851 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:03:50,938 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:04:10,958 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:04:32,847 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:04:52,932 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:05:13,006 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:05:33,021 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:05:53,204 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:06:13,105 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:06:29,621 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:06:49,701 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:07:09,725 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:07:29,789 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:07:49,809 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:07:49,865 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:08:09,898 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:08:29,926 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:08:49,963 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:09:09,983 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:09:30,073 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:09:50,082 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:10:10,162 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:10:30,187 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:10:50,249 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:11:10,279 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:11:30,307 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:11:50,329 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:12:10,398 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:12:30,476 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:12:50,498 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:13:10,565 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:13:30,600 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:13:42,788 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:14:02,830 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:14:22,845 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:14:42,907 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:15:02,973 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:15:22,995 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:15:43,090 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:16:03,235 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:16:23,232 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:16:43,244 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:17:03,284 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:17:23,344 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:17:43,695 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:18:03,812 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:18:23,703 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:18:43,781 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:19:03,847 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:19:23,878 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:19:43,944 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:20:04,034 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:20:24,044 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:20:42,230 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:21:02,269 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:21:22,300 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:21:42,299 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:22:02,484 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:22:22,489 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:22:42,549 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:23:02,736 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:23:22,838 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:23:42,896 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:24:02,946 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:24:22,986 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:24:43,139 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:25:03,148 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:25:23,238 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:25:43,348 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:26:03,399 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:26:23,489 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:26:43,495 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:27:03,550 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:27:23,589 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:27:43,721 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:28:03,782 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:28:31,271 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:28:51,339 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:29:11,371 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:29:31,409 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:29:51,423 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:30:11,449 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:30:31,476 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:30:51,504 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:31:11,540 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:31:31,563 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:31:51,630 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:32:11,676 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:32:31,718 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:32:57,874 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:33:17,977 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:33:38,004 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:33:58,017 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:34:18,087 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:34:38,146 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:34:58,221 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:35:18,236 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:35:38,298 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:35:58,347 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:36:18,653 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:36:38,931 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:36:39,010 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:36:59,008 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:37:19,018 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:37:39,085 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:37:59,158 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:38:19,197 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:38:39,233 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:38:59,250 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:39:19,323 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:39:39,346 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:39:59,436 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:40:19,457 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:40:39,473 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:40:59,529 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:41:19,540 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:41:39,650 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:41:59,661 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:42:19,645 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:42:39,728 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:42:59,722 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:43:19,794 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:43:41,890 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:44:01,975 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:44:22,048 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:44:42,064 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:45:02,147 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:45:22,174 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:45:42,240 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:46:02,321 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:46:22,332 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:46:42,365 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:47:02,424 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:47:22,505 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:47:42,538 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:48:02,574 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:48:22,597 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:48:42,615 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:49:02,762 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:49:22,790 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:49:42,820 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:50:02,865 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:50:22,869 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:50:22,904 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:50:42,953 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:51:02,992 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:51:23,024 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:51:43,058 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:52:03,081 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:52:23,158 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:52:43,200 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:53:03,228 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:53:23,251 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:53:43,279 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:54:03,311 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:54:23,333 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:54:43,370 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:55:03,388 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:55:23,453 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:55:43,494 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:56:03,530 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:56:23,567 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:56:43,781 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:57:03,647 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:57:23,641 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:57:43,670 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:58:03,747 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:58:23,815 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:58:43,897 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:59:03,930 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:59:23,962 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 03:59:43,974 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:00:04,045 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:00:24,073 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:00:44,144 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:01:04,224 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:01:24,251 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:01:44,606 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:02:04,305 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:02:24,332 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:02:44,365 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:03:04,370 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:03:24,430 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:03:50,942 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:04:11,023 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:04:31,067 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:04:51,132 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:05:11,141 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:05:31,223 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:05:51,246 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:06:11,268 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:06:31,381 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:06:51,387 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:07:11,483 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:07:31,477 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:07:51,557 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:08:11,575 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:08:31,646 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:08:51,691 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:09:11,719 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:09:31,752 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:09:51,775 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:10:11,852 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:10:31,893 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:10:51,901 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:10:51,953 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:11:11,964 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:11:32,019 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:11:52,053 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:12:12,082 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:12:32,103 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:12:52,210 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:13:12,227 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:13:32,251 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:13:52,265 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:14:01,924 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:14:21,981 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:14:42,025 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:15:02,048 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:15:22,061 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:15:42,134 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:16:02,204 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:16:22,278 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:16:42,360 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:17:02,384 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:17:22,399 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:17:42,470 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:18:02,533 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:18:22,604 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:18:42,684 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:19:02,714 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:19:22,741 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:19:42,776 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:20:02,816 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:20:22,849 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:20:42,869 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:21:02,876 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:21:22,953 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:21:42,978 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:22:03,052 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:22:23,056 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:22:43,144 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:23:03,178 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:23:23,211 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:23:43,228 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:24:03,599 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:24:23,660 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:24:51,959 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:25:12,036 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:25:32,107 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:25:52,139 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:26:12,934 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:26:32,991 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:26:53,012 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:27:13,057 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:27:33,138 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:27:53,210 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:28:13,227 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:28:33,289 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:28:53,337 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:29:13,350 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:29:33,359 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:29:53,401 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:30:13,429 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:30:33,445 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:30:54,225 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:31:14,287 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:31:34,321 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:31:54,352 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:32:14,374 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:32:34,422 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:32:54,481 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:33:14,571 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:33:34,590 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:33:48,285 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:34:08,304 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:34:28,354 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:34:48,382 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:35:08,393 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:35:28,439 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:35:48,466 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:36:08,487 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:36:28,571 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:36:48,587 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:37:08,661 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:37:28,711 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:37:48,717 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:38:01,727 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:38:21,780 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:38:41,810 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:39:01,851 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:39:21,848 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:39:42,131 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:40:02,202 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:40:22,212 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:40:42,304 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:41:02,300 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:41:22,324 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:41:42,407 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:42:02,428 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:42:22,507 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:42:42,539 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:43:02,550 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:43:22,627 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:43:42,667 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:44:02,664 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:44:22,728 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:44:42,753 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:44:49,459 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:45:12,971 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:45:42,954 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:46:02,996 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:46:23,008 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:46:43,041 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:47:03,063 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:47:23,085 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:47:43,125 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:48:03,162 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:48:23,191 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:48:43,214 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:49:03,240 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:49:23,286 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:49:43,305 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:50:03,346 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:50:23,425 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:50:43,455 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:51:03,470 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:51:23,525 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:51:43,581 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:52:03,613 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:52:23,646 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:52:43,666 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:53:03,729 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:53:23,800 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:53:43,826 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:54:03,844 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:54:23,929 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:54:43,966 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:54:44,002 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:55:04,019 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:55:24,049 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:55:44,072 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:56:04,090 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:56:24,153 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:56:44,229 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:57:04,290 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:57:24,351 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:57:44,414 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:58:04,417 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:58:24,436 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:58:44,527 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:59:04,537 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:59:24,611 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 04:59:44,626 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:00:04,684 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:00:24,765 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:00:44,802 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:01:04,825 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:01:24,846 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:01:44,873 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:02:04,924 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:02:24,989 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:02:45,046 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:03:14,465 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:03:34,563 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:03:54,595 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:04:14,609 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:04:34,695 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:04:54,768 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:05:14,826 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:05:34,906 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:05:54,940 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:06:14,966 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:06:34,989 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:06:55,057 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:07:23,787 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:07:43,900 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:08:03,884 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:08:23,965 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:08:23,999 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:08:44,033 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:09:04,093 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:09:24,117 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:09:44,113 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:10:04,177 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:10:24,218 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:10:44,244 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:11:04,396 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:11:24,305 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:11:44,332 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:12:04,349 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:12:24,414 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:12:44,440 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:13:04,469 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:13:24,489 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:13:34,975 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:13:55,044 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:14:15,054 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:14:35,098 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:14:55,109 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:15:15,154 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:15:35,168 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:15:55,241 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:16:15,333 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:16:35,338 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:16:55,411 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:17:15,489 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:17:35,532 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:17:55,564 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:18:15,685 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:18:35,604 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:18:55,601 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:19:15,676 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:19:35,689 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:19:55,726 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:20:15,749 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:20:35,837 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:20:55,840 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:21:16,080 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:21:35,957 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:21:56,000 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:22:16,036 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:22:36,059 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:22:56,098 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:23:16,146 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:23:36,154 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:23:56,180 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:24:16,218 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:24:36,240 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:24:56,285 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:25:16,320 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:25:36,341 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:25:56,366 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:26:16,604 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:26:36,667 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:26:56,694 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:27:16,708 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:27:36,781 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:27:56,888 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:28:16,878 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:28:36,904 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:28:56,988 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:29:17,020 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:29:37,032 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:29:57,112 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:30:17,208 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:30:37,238 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:30:57,257 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:31:17,532 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:31:37,330 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:31:57,413 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:32:17,488 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:32:37,605 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:32:57,659 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:33:17,915 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:33:38,001 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:33:38,032 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:33:58,069 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:34:18,170 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:34:38,179 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:34:58,199 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:35:18,268 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:35:38,300 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:35:58,365 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:36:18,426 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:36:38,635 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:36:58,473 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:37:18,484 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:37:38,500 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:37:58,547 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:38:18,625 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:38:38,704 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:38:58,718 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:39:18,780 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:39:38,806 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:39:58,840 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:40:18,884 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:40:38,888 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:40:58,927 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:41:18,988 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:41:39,075 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:41:59,108 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:42:19,137 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:42:39,127 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:42:59,200 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:43:18,123 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:43:38,188 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:43:58,202 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:44:18,293 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:44:38,328 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:44:58,367 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:45:18,441 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:45:38,463 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:45:58,505 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:46:18,512 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:46:38,582 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:46:58,665 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:47:18,692 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:47:38,720 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:47:58,754 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:48:18,813 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:48:38,887 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:48:58,907 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:49:18,967 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:49:38,971 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:49:58,985 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:50:19,019 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:50:39,062 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:50:59,119 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:51:19,168 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:51:39,373 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:51:59,306 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:52:19,388 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:52:39,435 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:52:59,501 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:53:19,691 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:53:39,753 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:53:59,810 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:54:19,875 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:54:39,890 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:54:59,966 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:55:19,998 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:55:40,015 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:56:00,034 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:56:20,070 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:56:40,102 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:57:00,147 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:57:20,162 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:57:40,179 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:58:01,239 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:58:25,077 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:58:54,065 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:59:14,144 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:59:34,193 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 05:59:54,215 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:00:14,232 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:00:34,295 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:00:54,320 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:01:14,358 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:01:34,387 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:01:54,402 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:02:14,408 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:02:34,491 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:02:54,545 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:03:14,566 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:03:34,631 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:03:54,623 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:04:14,730 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:04:34,737 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:04:54,745 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:05:14,845 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:05:34,903 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:05:54,952 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:06:14,994 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:06:35,043 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:06:55,095 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:07:15,194 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:07:35,207 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:07:55,246 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:08:15,304 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:08:35,394 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:08:55,697 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:09:15,554 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:09:35,551 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:09:55,654 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:10:15,695 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:10:35,805 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:10:55,859 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:11:15,852 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:11:36,008 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:11:55,997 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:12:16,108 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:12:36,256 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:12:56,356 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:13:09,862 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:13:28,775 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:13:52,590 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:14:12,674 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:14:32,744 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:14:52,815 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:15:12,886 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:15:32,912 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:15:52,932 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:16:12,980 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:16:33,003 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:16:53,033 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:16:53,086 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:17:13,113 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:17:33,146 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:17:53,181 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:18:13,205 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:18:33,264 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:18:53,331 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:19:13,332 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:19:33,361 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:19:53,395 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:20:13,409 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:20:33,421 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:20:53,477 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:21:13,481 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:21:33,535 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:21:53,591 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:22:13,629 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:22:33,636 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:22:53,709 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:23:13,739 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:23:33,766 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:23:53,827 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:24:13,812 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:24:33,897 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:24:53,904 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:25:13,974 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:25:34,010 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:25:54,023 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:26:14,098 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:26:34,123 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:26:54,164 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:27:14,183 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:27:34,271 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:27:54,287 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:28:14,318 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:28:34,330 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:28:54,411 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:29:14,406 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:29:34,477 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:29:54,549 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:30:14,560 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:30:34,626 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:30:54,698 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:31:14,717 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:31:34,779 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:31:54,816 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:32:14,830 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:32:34,905 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:32:54,960 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:33:15,032 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:33:35,052 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:33:55,142 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:34:15,203 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:34:35,265 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:34:55,340 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:35:15,367 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:35:35,456 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:35:55,471 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:36:15,539 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:36:35,566 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:36:55,640 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:37:15,675 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:37:35,727 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:37:55,806 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:38:15,832 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:38:35,890 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:38:55,969 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:39:16,035 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:39:36,101 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:39:56,269 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:40:16,281 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:40:36,320 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:40:56,396 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:41:16,439 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:41:36,468 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:41:56,492 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:42:16,517 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:42:36,580 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:42:56,617 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:43:16,655 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:43:36,686 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:43:56,738 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:44:16,810 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:44:36,845 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:44:56,870 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:45:16,950 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:45:36,967 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:45:57,001 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:46:17,037 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:46:37,299 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:46:57,088 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:47:17,172 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:47:37,204 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:47:57,243 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:48:17,275 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:48:37,281 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:48:57,321 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:49:17,357 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:49:37,386 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:49:57,422 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:50:17,447 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:50:37,503 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:50:57,567 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:51:17,635 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:51:37,718 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:51:57,732 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:52:17,795 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:52:37,844 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:52:57,874 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:53:06,518 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:53:26,573 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:53:46,599 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:54:06,634 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:54:26,695 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:54:46,769 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:55:06,822 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:55:26,910 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:55:46,928 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:56:06,963 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:56:26,986 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:56:47,009 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:57:07,032 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:57:27,056 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:57:47,086 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:58:07,097 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:58:27,156 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:58:47,176 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:59:07,206 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:59:27,215 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 06:59:47,278 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:00:07,308 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:00:27,329 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:00:47,526 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:01:07,436 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:01:27,472 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:01:47,477 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:02:07,569 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:02:27,577 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:02:47,606 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:03:07,688 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:03:27,710 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:03:47,728 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:04:07,801 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:04:27,825 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:04:47,889 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:05:07,907 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:05:27,918 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:05:48,163 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:05:48,452 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:06:08,228 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:06:28,292 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:06:48,337 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:07:08,396 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:07:28,439 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:07:48,450 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:08:08,488 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:08:28,526 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:08:48,555 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:09:08,583 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:09:30,614 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:09:50,683 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:10:10,774 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:10:30,791 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:10:50,899 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:11:10,966 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:11:30,986 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:11:49,817 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:12:13,650 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:12:33,757 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:12:53,777 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:13:13,806 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:13:33,837 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:13:53,920 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:14:13,966 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:14:33,961 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:14:54,094 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:15:14,099 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:15:14,149 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:15:34,180 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:15:54,536 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:16:14,610 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:16:34,705 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:16:54,731 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:17:14,748 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:17:34,826 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:17:54,890 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:18:14,953 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:18:15,602 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:18:39,123 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:18:59,210 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:19:19,222 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:19:39,252 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:19:59,270 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:20:19,341 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:20:39,375 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:20:59,624 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:21:19,479 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:21:39,485 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:21:59,501 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:22:19,512 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:22:39,565 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:22:59,596 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:23:19,615 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:23:39,689 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:23:59,709 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:24:19,791 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:24:39,824 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:24:59,839 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:25:19,881 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:25:39,908 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:25:59,948 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:26:19,967 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:26:40,069 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:27:00,116 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:27:20,185 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:27:40,216 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:28:00,238 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:28:20,266 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:28:40,339 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:29:00,367 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:29:20,433 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:29:40,502 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:30:00,574 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:30:20,607 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:30:40,635 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:31:00,841 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:31:20,934 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:31:41,009 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:32:01,042 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:32:21,135 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:32:41,167 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:33:01,195 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:33:21,276 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:33:41,298 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:34:01,385 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:34:21,419 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:34:41,443 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:35:01,518 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:35:21,547 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:35:41,583 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:36:01,760 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:36:21,684 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:36:41,750 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:37:01,837 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:37:21,868 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:37:41,885 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:37:47,803 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:38:07,824 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:38:27,919 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:38:48,005 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:39:08,027 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:39:28,041 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:39:51,228 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:40:11,293 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:40:31,375 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:40:51,402 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:41:11,438 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:41:31,457 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:41:51,486 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:42:11,519 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:42:31,538 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:42:51,580 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:43:11,590 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:43:31,660 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:43:51,715 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:44:11,714 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:44:31,804 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:44:51,828 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:45:11,860 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:45:31,895 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:45:51,903 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:46:11,974 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:46:32,224 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:46:52,066 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:47:12,109 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:47:32,160 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:47:52,237 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:48:07,772 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:48:27,807 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:48:47,860 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:49:07,876 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:49:27,951 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:49:47,983 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:50:08,137 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:50:08,197 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:50:28,227 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:50:48,248 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:51:08,270 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:51:28,290 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:51:48,382 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:52:08,417 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:52:28,422 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:52:48,450 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:53:08,519 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:53:28,602 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:53:48,666 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:54:08,734 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:54:28,782 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:54:48,851 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:55:08,932 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:55:28,956 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:55:48,963 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:56:09,045 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:56:29,082 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:56:49,088 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:57:09,118 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:57:13,382 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:57:33,414 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:57:53,508 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:58:13,520 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:58:39,673 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:58:59,770 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:59:19,843 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:59:39,932 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 07:59:59,960 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:00:20,045 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:00:42,133 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:01:02,220 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:01:22,296 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:01:42,304 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:02:02,387 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:02:22,508 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:02:42,524 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:03:02,520 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:03:22,597 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:03:42,672 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:04:02,743 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:04:22,810 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:04:42,875 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:04:58,064 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:05:18,130 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:05:38,124 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:05:38,161 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:05:58,215 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:06:18,253 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:06:38,273 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:06:58,371 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:07:18,338 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:07:38,392 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:07:58,382 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:08:27,071 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:08:47,174 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:08:47,211 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:09:07,243 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:09:27,279 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:09:47,306 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:10:07,335 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:10:27,417 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:10:47,631 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:11:07,466 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:11:27,551 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:11:47,581 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:12:07,649 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:12:27,697 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:12:47,761 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:13:07,786 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:13:27,808 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:13:47,882 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:14:07,942 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:14:28,016 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:14:48,017 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:15:10,114 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:15:30,236 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:15:50,322 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:16:10,347 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:16:30,399 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:16:50,407 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:17:10,521 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:17:30,512 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:17:50,583 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:18:10,603 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:18:30,658 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:18:54,675 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:19:14,775 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:19:34,814 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:19:54,854 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:20:14,845 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:20:34,927 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:20:54,956 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:21:14,957 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:21:35,038 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:21:55,090 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:22:15,103 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:22:30,209 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:22:50,283 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:23:10,399 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:23:30,426 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:23:50,444 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:24:10,522 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:24:30,549 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:24:50,634 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:25:10,641 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:25:30,652 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:25:50,743 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:26:10,733 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:26:30,801 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:26:50,833 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:27:10,867 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:27:30,899 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:27:50,920 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:28:10,996 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:28:31,042 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:28:51,051 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:29:11,128 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:29:31,123 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:29:51,208 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:30:13,212 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:30:33,319 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:30:53,356 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:31:13,384 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:31:33,446 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:31:53,519 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:32:13,555 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:32:33,578 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:32:53,648 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:33:13,738 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:33:33,764 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:33:53,790 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:34:13,833 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:34:33,918 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:34:53,965 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:35:13,955 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:35:34,034 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:35:54,061 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:36:14,071 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:36:34,155 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:36:54,183 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:37:14,170 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:37:34,243 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:37:54,296 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:38:14,389 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:38:34,622 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:38:54,451 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:39:14,525 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:39:34,555 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:39:54,590 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:40:14,612 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:40:34,627 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:40:54,707 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:41:14,760 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:41:34,914 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:41:54,783 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:42:14,842 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:42:34,922 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:42:54,948 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:43:14,992 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:43:35,150 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:43:55,038 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:44:15,124 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:44:35,158 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:44:55,192 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:45:15,223 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:45:35,297 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:45:55,348 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:46:15,365 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:46:35,431 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:46:55,708 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:47:15,837 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:47:35,801 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:47:55,892 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:48:15,913 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:48:35,973 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:48:56,042 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:49:16,126 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:49:36,163 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:49:56,197 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:50:16,207 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:50:36,276 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:50:56,330 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:51:16,378 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:51:36,392 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:51:56,624 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:52:16,742 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:52:36,737 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:52:56,748 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:53:16,822 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:53:38,048 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:53:38,164 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:53:58,132 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:54:18,153 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:54:38,188 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:54:58,252 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:55:18,326 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:55:38,368 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:55:58,429 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:56:18,510 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:56:38,535 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:56:58,807 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:57:18,874 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:57:38,891 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:57:59,071 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:58:19,087 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:58:39,162 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:58:59,190 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:58:59,238 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:59:19,283 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:59:39,296 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 08:59:59,360 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:00:19,389 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:00:39,470 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:00:59,545 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:01:19,571 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:01:39,635 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:01:59,665 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:02:21,740 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:02:41,801 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:03:01,857 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:03:21,883 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:03:41,908 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:04:01,971 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:04:22,046 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:04:42,079 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:05:01,688 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:05:21,724 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:05:41,773 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:06:01,786 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:06:21,811 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:06:41,860 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:07:02,171 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:07:21,933 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:07:42,045 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:08:02,060 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:08:21,606 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:08:41,645 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:09:01,672 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:09:21,693 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:09:41,766 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:10:01,791 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:10:21,855 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:10:41,933 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:11:01,953 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:11:22,037 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:11:42,051 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:12:02,139 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:12:22,141 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:12:42,230 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:13:02,262 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:13:22,282 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:13:42,355 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:14:02,385 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:14:22,447 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:14:52,250 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:15:12,292 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:15:32,334 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:15:52,368 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:16:12,388 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:16:32,457 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:16:52,524 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:17:12,592 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:17:32,656 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:17:52,728 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:18:12,802 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:18:32,828 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:18:52,846 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:19:12,885 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:19:32,907 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:19:54,798 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:20:14,902 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:20:34,909 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:20:54,927 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:21:15,004 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:21:35,037 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:21:55,071 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:22:15,076 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:22:35,224 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:22:55,178 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:23:15,238 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:23:35,315 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:23:55,383 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:24:15,436 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:24:35,450 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:24:55,496 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:25:15,514 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:25:35,544 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:25:55,561 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:26:15,621 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:26:35,707 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:26:55,730 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:27:15,811 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:27:35,816 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:27:56,052 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:28:16,113 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:28:36,177 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:28:56,263 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:29:16,345 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:29:29,095 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:29:49,103 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:30:09,164 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:30:29,222 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:30:49,289 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:31:09,322 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:31:29,329 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:31:49,351 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:32:09,539 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:32:29,568 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:32:49,599 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:33:09,613 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:33:29,686 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:33:49,759 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:34:09,793 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:34:29,865 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:34:49,899 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:35:04,565 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:35:28,775 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:35:48,882 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:36:08,909 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:36:28,948 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:36:48,975 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:37:09,039 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:37:29,125 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:37:49,138 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:38:09,155 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:38:29,240 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:38:49,239 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:38:49,298 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:39:09,330 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:39:29,361 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:39:49,387 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:40:09,394 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:40:29,429 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:40:49,461 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:41:09,547 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:41:29,565 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:41:49,643 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:42:09,654 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:42:29,733 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:42:49,813 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:43:09,973 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:43:30,031 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:43:50,105 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:44:07,638 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:44:33,785 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:44:53,901 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:45:13,935 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:45:33,971 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:45:53,993 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:46:14,061 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:46:34,157 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:46:53,651 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:47:03,286 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:47:13,318 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:47:23,295 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:47:33,282 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:47:43,300 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:47:53,283 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:47:59,471 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [215]: Trying to access OctoPrint instance at http://192.168.2.171:5003/ with the provided API key.
2020-03-08 09:47:59,548 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [418]: API key accepted by OctoPrint.
2020-03-08 09:48:03,283 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:48:06,209 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.disconnect [315]: Connection with instance BlueLeader with url http://192.168.2.171:5003/ stopped
2020-03-08 09:48:06,248 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-08 09:48:06,251 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device BlueLeader already added
2020-03-08 09:48:06,252 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [303]: Connection with instance BlueLeader with url http://192.168.2.171:5003/ started
2020-03-08 09:48:06,283 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device BlueLeader already added
2020-03-08 09:48:06,293 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:48:06,777 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [215]: Trying to access OctoPrint instance at http://192.168.2.171:5003/ with the provided API key.
2020-03-08 09:48:07,762 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevicePlugin._keepDiscoveryAlive [112]: Zeroconf discovery has died, restarting discovery of OctoPrint instances.
2020-03-08 09:48:07,763 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.disconnect [315]: Connection with instance BlueLeader with url http://192.168.2.171:5003/ stopped
2020-03-08 09:48:07,771 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-08 09:48:07,774 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device BlueLeader already added
2020-03-08 09:48:07,776 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [303]: Connection with instance BlueLeader with url http://192.168.2.171:5003/ started
2020-03-08 09:48:07,810 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device BlueLeader already added
2020-03-08 09:48:07,812 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:48:08,293 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [215]: Trying to access OctoPrint instance at http://192.168.2.171:5003/ with the provided API key.
2020-03-08 09:48:16,269 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-03-08 09:48:18,286 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:48:28,296 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:48:38,291 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:48:48,286 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:48:58,281 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:49:08,305 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:49:18,303 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:49:28,290 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:49:38,286 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:49:48,293 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:49:58,295 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:50:08,302 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:50:18,306 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:50:28,286 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:50:38,280 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:50:48,299 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:50:58,283 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:51:08,294 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:51:18,279 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:51:28,286 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:51:38,278 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:51:48,295 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:51:58,283 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:52:08,286 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:52:18,283 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:52:28,279 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:52:38,281 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:52:48,297 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:52:58,280 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:53:08,290 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:53:18,275 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 09:53:25,436 - INFO - [MainThread] cura.UI.MachineActionManager.addDefaultMachineActions [56]: Default machine actions have been added for machine definition [wanhao_i3plus], do nothing.
2020-03-08 09:53:25,619 - INFO - [MainThread] cura.Settings.GlobalStack.addExtruder [184]: Extruder[wanhao_i3plus_extruder_0 #6] added to [Wanhao Duplicator i3 Plus #2] at position [0]
2020-03-08 09:53:25,621 - WARNING - [MainThread] cura.Settings.ExtruderManager.registerExtruder [156]: Extruder [wanhao_i3plus_extruder_0 #6] has already been registered on machine [Wanhao Duplicator i3 Plus #2], not doing anything
2020-03-08 09:53:25,626 - INFO - [MainThread] UM.Logger.info [112]: Initializing Active Machine...
2020-03-08 09:53:25,724 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-08 09:53:25,727 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [303]: Connection with instance RedLeader with url http://192.168.2.171:5000/ started
2020-03-08 09:53:25,740 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/SettingsMenu.qml:51: TypeError: Cannot read property 'isEnabled' of undefined
2020-03-08 09:53:25,743 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/SettingsMenu.qml:44: TypeError: Cannot read property 'isEnabled' of undefined
2020-03-08 09:53:25,747 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/MaterialMenu.qml:26: TypeError: Cannot read property 'isEnabled' of undefined
2020-03-08 09:53:25,749 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/MaterialMenu.qml:28: TypeError: Cannot read property 'material' of undefined
2020-03-08 09:53:25,753 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-08 09:53:25,815 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-08 09:53:25,827 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-08 09:53:25,834 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-08 09:53:26,148 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device RedLeader already added
2020-03-08 09:53:26,231 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [741]: Set OctoPrint camera url to http://octolinux.local:8080/?action=stream
2020-03-08 09:53:26,267 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [135]: New error check scheduled.
2020-03-08 09:53:26,609 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-08 09:53:26,618 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [63]: Updating QualityProfilesDropDownMenuModel.
2020-03-08 09:53:27,109 - INFO - [MainThread] cura.Machines.MachineErrorChecker._setResult [187]: Error check finished, result = False, time = 0.8s
2020-03-08 09:53:30,983 - INFO - [Thread-5] STLReader.STLReader.load_file [51]: Using NumPy-STL to load STL data.
2020-03-08 09:53:31,333 - DEBUG - [Thread-5] UM.Mesh.MeshData.calculateNormalsFromVertices [495]: Calculating normals took 0.0006999969482421875 seconds
2020-03-08 09:53:31,334 - DEBUG - [Thread-5] STLReader.STLReader._read [102]: Loaded a mesh with 35922 vertices
2020-03-08 09:53:31,352 - DEBUG - [Thread-5] UM.Mesh.MeshData.approximateConvexHull [452]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.012928009033203125 seconds. 154 input vertices. 154 output vertices.
2020-03-08 09:53:31,360 - DEBUG - [Thread-5] UM.FileHandler.ReadFileJob.run [71]: Loading file took 0.4 seconds
2020-03-08 09:53:31,377 - DEBUG - [Thread-5] UM.Mesh.MeshData.approximateConvexHull [452]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.012634992599487305 seconds. 154 input vertices. 154 output vertices.
2020-03-08 09:53:31,437 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: <UM.Operations.AddSceneNodeOperation.AddSceneNodeOperation object at 0x6000151c9e58>, took 9ms
2020-03-08 09:53:31,443 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/transparent_object.shader]...
2020-03-08 09:53:33,392 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [225]: Starting to slice...
2020-03-08 09:53:33,393 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [243]: Going to slice build plate [0]!
2020-03-08 09:53:33,401 - WARNING - [Thread-6] UM.Decorators.deprecated_function [20]: <function GlobalStack.extruders at 0x600007dd1a88> is deprecated (since 4.4): Please use extruderList instead.
2020-03-08 09:53:33,738 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onStartSliceCompleted [429]: Sending slice message took 0.345318078994751 seconds
2020-03-08 09:53:34,008 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING]  -s speed_prime_tower="60" -s print_bed_temperature="65" -s machine_steps_per_mm_z="50" -s wall_0_extruder_nr="-1" -s support_interface_skip_height="0.3" -s support_initial_layer_line_distance="2.6666666666666665" -s retract_at_layer_change="False" -s support_bottom_extruder_nr="0" -s minimum_support_area="0.0" -s bridge_wall_coast="100" -s material_bed_temp_wait="True" -s magic_spiralize="False" -s support_bottom_line_width="0.4" -s machine_minimum_feedrate="0.0" -s small_feature_speed_factor="50" -s cool_fan_speed="100.0" -s support_enable="False" -s command_line_settings="0" -s raft_base_line_width="0.8" -s support_skip_some_zags="False" -s speed_print="60" -s machine_depth="200" -s raft_surface_speed="30.0" -s support_roof_enable="True" -s alternate_extra_perimeter="False" -s skin_angles="[ ]" -s cool_min_speed="10" -s jerk_skirt_brim="20" -s raft_interface_acceleration="3000" -s support_skip_zag_per_mm="20" -s roofing_material_flow="100" -s machine_name="Wanhao Duplicator i3 Plus" -s wipe_pause="0" -s wipe_retraction_prime_speed="25" -s support_use_towers="True" -s support_mesh="False" -s support_roof_pattern="concentric" -s travel_avoid_other_parts="True" -s support_interface_material_flow="100" -s infill_overlap="10" -s machine_max_feedrate_z="299792458000" -s cool_fan_full_layer="2" -s support_bottom_line_distance="0.4" -s support_bottom_pattern="concentric" -s speed_topbottom="30.0" -s raft_smoothing="5" -s roofing_line_width="0.4" -s magic_mesh_surface_mode="normal" -s acceleration_prime_tower="3000" -s meshfix_maximum_deviation="0.05" -s speed_travel_layer_0="60.0" -s magic_fuzzy_skin_thickness="0.3" -s meshfix_extensive_stitching="False" -s raft_base_thickness="0.36" -s support_type="buildplate" -s skin_edge_support_layers="0" -s draft_shield_dist="10" -s skin_no_small_gaps_heuristic="False" -s jerk_wall_x="20" -s retraction_min_travel="0.8" -s support_roof_line_width="0.4" -s bottom_thickness="0.8" -s retraction_extra_prime_amount="0" -s material_print_temperature_layer_0="210" -s acceleration_support="3000" -s top_bottom_extruder_nr="-1" -s adhesion_z_offset="0" -s mold_roof_height="0.5" -s support_extruder_nr_layer_0="0" -s meshfix_maximum_travel_resolution="0.8" -s clean_between_layers="False" -s wireframe_top_jump="0.6" -s top_bottom_pattern_0="lines" -s support_conical_min_width="5.0" -s machine_disallowed_areas="[]" -s gantry_height="180" -s material_surface_energy="100" -s jerk_wall="20" -s top_bottom_thickness="0.8" -s brim_line_count="8" -s support_roof_line_distance="0.4" -s jerk_support_interface="20" -s cool_fan_speed_min="100.0" -s wipe_move_distance="20" -s minimum_roof_area="1.0" -s brim_replaces_support="True" -s speed_z_hop="10" -s bridge_skin_material_flow="60" -s bridge_skin_material_flow_2="100" -s infill_sparse_thickness="0.1" -s small_feature_speed_factor_0="50" -s raft_surface_line_width="0.4" -s infill_enable_travel_optimization="False" -s machine_heat_zone_length="16" -s material_end_of_filament_purge_speed="0.5" -s acceleration_support_infill="3000" -s brim_gap="0" -s layer_0_z_overlap="0.15" -s infill_material_flow="100" -s speed_support_roof="40.0" -s wireframe_drag_along="0.6" -s print_temperature="210" -s xy_offset_layer_0="0" -s support_interface_height="1" -s ironing_pattern="zigzag" -s raft_interface_thickness="0.15000000000000002" -s travel_compensate_overlapping_walls_enabled="True" -s support_line_width="0.4" -s ooze_shield_enabled="False" -s support_interface_offset="0.0" -s support_tree_enable="False" -s retraction_hop_after_extruder_switch_height="1" -s bridge_skin_density_2="75" -s speed_wall_x="60.0" -s adhesion_type="none" -s default_material_bed_temperature="60" -s machine_max_jerk_z="0.4" -s support_tree_angle="40" -s material_linear_advance_factor_support_interface="0" -s conical_overhang_enabled="False" -s support_pattern="lines" -s extruder_prime_pos_y="0" -s jerk_layer_0="20" -s travel_compensate_overlapping_walls_0_enabled="True" -s sub_div_rad_add="0.4" -s infill_multiplier="1" -s support_infill_rate="15" -s material_anti_ooze_retracted_position="-4" -s jerk_print_layer_0="20" -s wireframe_roof_inset="3" -s cool_fan_speed_0="0" -s support_brim_line_count="20" -s blackmagic="0" -s infill_support_enabled="False" -s raft_interface_speed="22.5" -s travel_avoid_distance="0.625" -s support_bottom_enable="False" -s dual="0" -s cross_infill_pocket_size="4.0" -s wall_line_width_0="0.4" -s support_top_distance="0.1" -s retraction_hop_after_extruder_switch="True" -s material_guid="" -s support_mesh_drop_down="True" -s ironing_line_spacing="0.1" -s mold_enabled="False" -s jerk_travel_layer_0="30.0" -s speed_slowdown_layers="2" -s default_material_print_temperature="210" -s roofing_layer_count="0" -s infill_mesh_order="0" -s support="0" -s spaghetti_infill_enabled="False" -s raft_fan_speed="0" -s machine_max_acceleration_y="9000" -s meshfix="0" -s acceleration_skirt_brim="3000" -s switch_extruder_extra_prime_amount="0" -s wireframe_flow="100" -s jerk_ironing="20" -s roofing_angles="[ ]" -s top_skin_expand_distance="0.8" -s acceleration_ironing="3000" -s prime_tower_flow="100" -s bridge_wall_material_flow="50" -s travel="0" -s switch_extruder_prime_speed="20" -s wall_x_extruder_nr="-1" -s cool_fan_speed_max="100.0" -s wall_overhang_angle="90" -s cool_fan_enabled="True" -s support_roof_height="1.2" -s material="0" -s infill_before_walls="True" -s material_bed_temp_prepend="True" -s wireframe_printspeed_bottom="5" -s skin_preshrink="0.8" -s wall_0_wipe_dist="0.2" -s material_linear_advance_factor_wall_0="0" -s bottom_skin_preshrink="0.8" -s support_xy_distance_overhang="0.2" -s machine_gcode_flavor="RepRap (Marlin/Sprinter)" -s wireframe_roof_fall_down="2" -s wireframe_strategy="compensate" -s machine_endstop_positive_direction_y="False" -s wireframe_top_delay="0" -s spaghetti_max_infill_angle="10" -s acceleration_support_interface="3000" -s speed_layer_0="30.0" -s time="09:53:33" -s machine_buildplate_type="glass" -s raft_base_jerk="20" -s machine_nozzle_id="unknown" -s wipe_brush_pos_x="100" -s acceleration_travel_layer_0="5000.0" -s speed_equalize_flow_max="150" -s bridge_skin_support_threshold="50" -s machine_max_jerk_e="5.0" -s raft_margin="15" -s wireframe_fall_down="0.5" -s support_offset="0" -s material_flow="100" -s cool_min_layer_time="5" -s material_linear_advance_factor="0" -s adhesion_z_offset_extensive_processing="False" -s meshfix_union_all="True" -s support_z_distance="0.1" -s material_linear_advance_factor_skirt_brim="0" -s layer_height_0="0.3" -s bridge_fan_speed_2="0" -s initial_bottom_layers="8" -s support_interface_pattern="concentric" -s bridge_skin_material_flow_3="110" -s bridge_wall_speed="15.0" -s support_bottom_offset="0.0" -s material_linear_advance_factor_infill="0" -s material_print_temp_prepend="True" -s wireframe_printspeed_down="5" -s support_bottom_material_flow="100" -s ironing_enabled="False" -s acceleration_travel="5000" -s acceleration_wall="3000" -s raft_base_acceleration="3000" -s wall_extruder_nr="-1" -s skin_overlap="5" -s print_sequence="all_at_once" -s material_linear_advance_factor_prime_tower="0" -s retraction_prime_speed="25" -s z_seam_type="sharpest_corner" -s spaghetti_inset="0.2" -s speed_support_bottom="40.0" -s material_extrusion_cool_down_speed="0.7" -s wipe_repeat_count="5" -s meshfix_maximum_resolution="0.5" -s gradual_support_infill_step_height="1" -s adhesion_extruder_nr="0" -s mold_width="5" -s jerk_support_infill="20" -s wall_overhang_speed_factor="100" -s raft_acceleration="3000" -s support_bottom_height="1" -s acceleration_support_roof="3000" -s support_roof_offset="0.0" -s speed_roofing="30.0" -s support_bottom_stair_step_height="0.3" -s brim_outside_only="True" -s material_standby_temperature="150" -s raft_surface_layers="2" -s skirt_brim_minimal_length="250" -s travel_compensate_overlapping_walls_x_enabled="True" -s wireframe_flow_connection="100" -s machine_nozzle_expansion_angle="45" -s adaptive_layer_height_enabled="False" -s spaghetti_infill_extra_volume="0" -s support_connect_zigzags="True" -s jerk_support_roof="20" -s machine_extruder_count="1" -s wireframe_flow_flat="100" -s speed_print_layer_0="30.0" -s raft_jerk="20" -s prime_tower_min_volume="6" -s material_bed_temperature="65" -s draft_shield_height="10" -s retraction_combing_max_distance="0" -s z_seam_x="100.0" -s infill_line_distance="4.0" -s minimum_bottom_area="1.0" -s xy_offset="0" -s extruders_enabled_count="1" -s machine_end_gcode="" -s machine_center_is_zero="False" -s jerk_print="20" -s magic_fuzzy_skin_point_dist="0.8" -s bridge_skin_speed_3="15.0" -s spaghetti_flow="20" -s filter_out_tiny_gaps="True" -s skin_outline_count="1" -s jerk_prime_tower="20" -s wireframe_nozzle_clearance="1" -s speed_infill="60" -s material_linear_advance_factor_topbottom="0" -s wireframe_enabled="False" -s skirt_line_count="4" -s retraction_count_max="90" -s gradual_support_infill_steps="0" -s connect_infill_polygons="False" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s connect_skin_polygons="False" -s infill_pattern="grid" -s infill_wipe_dist="0.1" -s bottom_skin_expand_distance="0.8" -s retraction_hop="1" -s jerk_wall_0="20" -s support_roof_extruder_nr="0" -s acceleration_enabled="False" -s machine_show_variants="False" -s gradual_infill_steps="0" -s jerk_infill="20" -s wall_0_inset="0" -s relative_extrusion="False" -s wipe_retraction_amount="6.5" -s material_break_temperature="50" -s machine_steps_per_mm_y="50" -s wireframe_printspeed="5" -s support_tree_branch_diameter="2" -s wipe_hop_amount="1" -s support_join_distance="2.0" -s speed_equalize_flow_enabled="False" -s wall_line_width="0.4" -s skin_material_flow="100" -s support_bottom_density="100" -s flow_rate_extrusion_offset_factor="100" -s carve_multiple_volumes="False" -s acceleration_wall_x="3000" -s acceleration_roofing="3000" -s retraction_hop_enabled="False" -s switch_extruder_retraction_speed="20" -s top_skin_preshrink="0.8" -s initial_layer_line_width_factor="100.0" -s machine_start_gcode="" -s material_diameter="2.85" -s flow_rate_max_extrusion_offset="0" -s platform_adhesion="0" -s support_bottom_stair_step_width="5.0" -s machine_acceleration="4000" -s cool_min_layer_time_fan_speed_max="10" -s prime_blob_enable="False" -s meshfix_keep_open_polygons="False" -s machine_extruders_share_heater="False" -s speed_wall_0="30.0" -s cool_lift_head="False" -s material_break_speed="25" -s machine_max_acceleration_z="100" -s support_wall_count="0" -s skin_edge_support_thickness="0" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s wall_min_flow_retract="False" -s minimum_polygon_circumference="1.0" -s wipe_hop_speed="10" -s date="08-03-2020" -s speed_support="60" -s ironing_inset="0.2" -s wireframe_roof_outer_delay="0.2" -s bridge_fan_speed_3="0" -s z_seam_y="200" -s support_interface_enable="False" -s bridge_skin_density_3="80" -s shell="0" -s support_infill_angles="[ ]" -s infill_extruder_nr="-1" -s infill_sparse_density="20" -s wall_thickness="0.8" -s material_crystallinity="False" -s machine_steps_per_mm_e="1600" -s support_bottom_distance="0" -s prime_tower_line_width="0.4" -s spaghetti_infill_stepped="True" -s machine_max_feedrate_e="299792458000" -s infill_line_width="0.4" -s magic_fuzzy_skin_outside_only="False" -s jerk_support_bottom="20" -s material_print_temp_wait="True" -s support_roof_angles="[ ]" -s support_interface_angles="[ ]" -s small_feature_max_length="0.0" -s skin_overlap_mm="0.02" -s material_flush_purge_length="60" -s raft_interface_line_spacing="1.0" -s machine_nozzle_heat_up_speed="2.0" -s adaptive_layer_height_threshold="0.2" -s top_thickness="0.8" -s bridge_skin_density="100" -s wall_min_flow="0" -s ironing_flow="10.0" -s support_tree_collision_resolution="0.2" -s raft_base_fan_speed="0" -s bridge_settings_enabled="False" -s support_roof_material_flow="100" -s machine_max_feedrate_y="299792458000" -s alternate_carve_order="True" -s wipe_retraction_enable="True" -s day="Sun" -s support_tree_branch_diameter_angle="5" -s experimental="0" -s prime_tower_position_x="197.975" -s bridge_wall_min_length="5" -s machine_steps_per_mm_x="50" -s jerk_topbottom="20" -s remove_empty_first_layers="True" -s prime_tower_size="20" -s jerk_roofing="20" -s travel_speed="120" -s speed="0" -s cutting_mesh="False" -s machine_max_jerk_xy="20.0" -s material_adhesion_tendency="10" -s extruder_prime_pos_abs="False" -s nozzle_disallowed_areas="[]" -s support_interface_extruder_nr="0" -s support_tower_maximum_supported_diameter="3.0" -s wipe_retraction_extra_prime_amount="0" -s material_break_preparation_retracted_position="-16" -s infill_mesh="False" -s layer_height="0.1" -s support_brim_width="8.0" -s machine_nozzle_head_distance="3" -s prime_tower_brim_enable="False" -s gradual_infill_step_height="1.5" -s outer_inset_first="False" -s support_tower_roof_angle="65" -s extruder_prime_pos_z="0" -s skirt_gap="3" -s machine_width="200" -s machine_max_feedrate_x="299792458000" -s anti_overhang_mesh="False" -s travel_retract_before_outer_wall="False" -s machine_height="180" -s retraction_extrusion_window="6.5" -s support_fan_enable="False" -s coasting_enable="False" -s support_interface_density="100" -s support_material_flow="100" -s bridge_fan_speed="100" -s support_infill_extruder_nr="0" -s infill="0" -s coasting_speed="90" -s jerk_travel="30" -s ooze_shield_angle="60" -s machine_endstop_positive_direction_x="False" -s material_final_print_temperature="195" -s acceleration_print="3000" -s material_linear_advance_factor_wall_x="0" -s speed_support_infill="60" -s max_extrusion_before_wipe="10" -s raft_base_line_spacing="1.6" -s retraction_enable="True" -s support_line_distance="2.6666666666666665" -s material_print_temperature="210" -s mold_angle="40" -s raft_speed="30.0" -s retraction_amount="6.5" -s wipe_retraction_speed="25" -s support_tower_diameter="3.0" -s material_break_retracted_position="-50" -s material_initial_print_temperature="200" -s resolution="0" -s wireframe_printspeed_up="5" -s support_infill_sparse_thickness="0.1" -s material_bed_temperature_layer_0="65" -s adaptive_layer_height_variation="0.1" -s cross_infill_density_image="" -s skirt_brim_speed="30.0" -s machine_nozzle_temp_enabled="True" -s material_maximum_park_duration="300" -s switch_extruder_retraction_amount="16" -s wall_line_width_x="0.4" -s jerk_support="20" -s bridge_skin_speed_2="15.0" -s raft_surface_fan_speed="0" -s max_skin_angle_for_expansion="90" -s raft_interface_line_width="0.8" -s infill_offset_x="0" -s magic_fuzzy_skin_enabled="False" -s jerk_enabled="False" -s support_zag_skip_count="8" -s machine_filament_park_distance="16" -s fill_outline_gaps="False" -s z_seam_position="back" -s infill_randomize_start_location="False" -s mesh_position_y="0" -s machine_max_acceleration_x="9000" -s speed_support_interface="40.0" -s magic_fuzzy_skin_point_density="1.25" -s wall_line_count="2" -s wipe_retraction_retract_speed="25" -s multiple_mesh_overlap="0.15" -s z_seam_corner="z_seam_corner_inner" -s machine_head_with_fans_polygon="[[-20, 10], [10, 10], [10, -10], [-20, -10]]" -s wall_material_flow="100" -s material_flow_layer_0="100" -s retraction_combing="all" -s travel_avoid_supports="False" -s acceleration_infill="3000" -s machine_nozzle_size="0.4" -s raft_interface_jerk="20" -s material_shrinkage_percentage="0" -s material_break_preparation_temperature="210" -s bridge_skin_speed="15.0" -s skirt_brim_material_flow="100" -s retraction_speed="25" -s wall_0_material_flow="100" -s material_no_load_move_factor="0.940860215" -s raft_surface_line_spacing="0.4" -s material_anti_ooze_retraction_speed="5" -s support_conical_enabled="False" -s cross_support_density_image="" -s z_seam_relative="False" -s wireframe_height="3" -s smooth_spiralized_contours="True" -s wireframe_straight_before_down="20" -s infill_angles="[ ]" -s minimum_interface_area="1.0" -s draft_shield_enabled="False" -s machine_nozzle_cool_down_speed="2.0" -s speed_ironing="20.0" -s machine_max_acceleration_e="10000" -s limit_support_retractions="True" -s material_linear_advance_factor_support="0" -s support_tree_branch_distance="1" -s wall_x_material_flow="100" -s min_skin_width_for_expansion="4.898587196589413e-17" -s prime_tower_position_y="177.975" -s mesh_position_x="0" -s expand_skins_expand_distance="0.8" -s roofing_pattern="lines" -s small_hole_max_size="0" -s acceleration_wall_0="3000" -s support_interface_line_width="0.4" -s support_bottom_angles="[ ]" -s infill_wall_line_count="0" -s support_supported_skin_fan_speed="100" -s draft_shield_height_limitation="full" -s wireframe_printspeed_flat="5" -s skin_line_width="0.4" -s machine_firmware_retract="False" -s switch_extruder_retraction_speeds="20" -s top_layers="8" -s initial_extruder_nr="0" -s meshfix_union_all_remove_holes="False" -s support_brim_enable="False" -s cool_fan_full_at_height="0.3" -s machine_heated_build_volume="False" -s support_conical_angle="30" -s brim_width="8.0" -s raft_interface_fan_speed="0" -s fill_perimeter_gaps="everywhere" -s prime_tower_wipe_enabled="True" -s spaghetti_max_height="2.0" -s support_roof_density="100" -s acceleration_topbottom="3000" -s machine_settings="0" -s ironing_only_highest_layer="False" -s wireframe_flat_delay="0.1" -s bridge_sparse_infill_max_density="0" -s wireframe_bottom_delay="0" -s line_width="0.4" -s optimize_wall_printing_order="False" -s zig_zaggify_support="False" -s wipe_hop_enable="False" -s acceleration_print_layer_0="3000" -s speed_travel="120" -s support_angle="70" -s raft_base_speed="22.5" -s machine_shape="rectangular" -s machine_heated_bed="True" -s machine_use_extruder_offset_to_offset_coords="True" -s wireframe_roof_drag_along="0.8" -s acceleration_support_bottom="3000" -s material_end_of_filament_purge_length="20" -s material_break_preparation_speed="2" -s acceleration_layer_0="3000" -s support_xy_overrides_z="z_overrides_xy" -s min_infill_area="0" -s machine_nozzle_tip_outer_diameter="1" -s cooling="0" -s raft_airgap="0.3" -s material_flush_purge_speed="0.5" -s slicing_tolerance="middle" -s retraction_retract_speed="25" -s layer_start_y="0.0" -s build_volume_temperature="28" -s extruder_prime_pos_x="0" -s infill_overlap_mm="0.04" -s mesh_position_z="0" -s conical_overhang_angle="50" -s zig_zaggify_infill="False" -s raft_surface_acceleration="3000" -s wireframe_up_half_speed="0.3" -s bridge_enable_more_layers="True" -s raft_surface_thickness="0.1" -s prime_tower_enable="False" -s material_linear_advance_factor_wall="0" -s coasting_min_volume="0.8" -s support_xy_distance="0.7" -s speed_wall="30.0" -s infill_support_angle="40" -s adaptive_layer_height_variation_step="0.01" -s raft_surface_jerk="20" -s layer_start_x="0.0" -s machine_min_cool_heat_time_window="50.0" -s ooze_shield_dist="2" -s material_flow_dependent_temperature="False" -s bottom_layers="8" -s infill_offset_y="0" -s machine_feeder_wheel_diameter="10.0" -s retraction_hop_only_when_collides="False" -s roofing_extruder_nr="-1" -s skirt_brim_line_width="0.4" -s center_object="False" -s top_bottom_pattern="lines" -s support_extruder_nr="0" -s coasting_volume="0.064" -s machine_endstop_positive_direction_z="True" -e0 -s speed_prime_tower="60" -s machine_steps_per_mm_z="50" -s jerk_support_roof="20" -s support_interface_skip_height="0.3" -s support_interface_offset="0.0" -s support_initial_layer_line_distance="2.6666666666666665" -s retract_at_layer_change="False" -s minimum_support_area="0.0" -s bridge_wall_coast="100" -s support_bottom_line_width="0.4" -s machine_nozzle_offset_x="0" -s small_feature_speed_factor="50" -s switch_extruder_prime_speed="20" -s cool_fan_speed="80" -s command_line_settings="0" -s experimental="0" -s raft_base_line_width="0.8" -s support_skip_some_zags="False" -s machine_nozzle_offset_y="0" -s speed_print="60" -s raft_surface_speed="30.0" -s support_roof_enable="True" -s alternate_extra_perimeter="False" -s skin_angles="[ ]" -s cool_min_speed="10" -s machine_extruder_end_pos_x="0" -s jerk_skirt_brim="20" -s raft_interface_acceleration="3000" -s material_break_preparation_retracted_position="-16" -s support_skip_zag_per_mm="20" -s roofing_material_flow="100" -s skin_overlap="5" -s wipe_pause="0" -s wipe_retraction_prime_speed="35" -s support_use_towers="True" -s support_roof_pattern="concentric" -s travel_avoid_other_parts="True" -s cool_fan_full_layer="2" -s support_bottom_line_distance="0.4" -s material_linear_advance_factor_topbottom="0" -s support_bottom_pattern="concentric" -s speed_topbottom="30.0" -s raft_smoothing="5" -s roofing_line_width="0.4" -s magic_mesh_surface_mode="normal" -s acceleration_prime_tower="3000" -s meshfix_maximum_deviation="0.05" -s speed_travel_layer_0="30.0" -s skin_edge_support_layers="0" -s skin_no_small_gaps_heuristic="False" -s wipe_hop_enable="False" -s zig_zaggify_support="False" -s bridge_fan_speed="100" -s support_material_flow="100" -s retraction_extra_prime_amount="0" -s support_supported_skin_fan_speed="100" -s infill_wall_line_count="0" -s acceleration_support_interface="3000" -s spaghetti_max_infill_angle="10" -s resolution="0" -s support_interface_pattern="concentric" -s bridge_skin_material_flow_3="110" -s initial_bottom_layers="6" -s bridge_fan_speed_2="0" -s mold_roof_height="0.5" -s meshfix_maximum_travel_resolution="0.8" -s extruder_prime_pos_x="0" -s layer_start_y="0.0" -s top_bottom_pattern_0="lines" -s support_conical_min_width="5.0" -s cool_fan_speed_min="80" -s wipe_move_distance="20" -s brim_replaces_support="True" -s extruder_prime_pos_z="0" -s support_tower_roof_angle="65" -s speed_z_hop="10" -s skirt_brim_speed="12" -s switch_extruder_retraction_amount="16" -s material_maximum_park_duration="300" -s machine_nozzle_temp_enabled="True" -s top_bottom_thickness="0.8" -s raft_base_speed="22.5" -s support_angle="70" -s machine_steps_per_mm_e="1600" -s material_crystallinity="False" -s support_bottom_distance="0" -s wall_thickness="0.8" -s material_flush_purge_length="60" -s machine_nozzle_heat_up_speed="2.0" -s raft_interface_line_spacing="1.0" -s support_bottom_material_flow="100" -s acceleration_travel="5000" -s acceleration_wall="3000" -s ironing_enabled="False" -s raft_surface_line_width="0.4" -s acceleration_support_infill="3000" -s brim_gap="0" -s support_line_width="0.4" -s jerk_prime_tower="20" -s skin_outline_count="1" -s support_interface_height="1" -s support_conical_enabled="False" -s material_anti_ooze_retraction_speed="5" -s z_seam_corner="z_seam_corner_inner" -s wipe_retraction_speed="35" -s retraction_amount="3" -s raft_interface_thickness="0.15000000000000002" -s jerk_wall_0="20" -s retraction_hop="1" -s infill_sparse_thickness="0.1" -s extruder_prime_pos_abs="False" -s material_adhesion_tendency="0" -s support_tree_angle="40" -s conical_overhang_enabled="False" -s extruder_prime_pos_y="0" -s travel_compensate_overlapping_walls_0_enabled="True" -s infill_multiplier="1" -s support_infill_rate="15" -s jerk_wall_x="20" -s cool_fan_speed_0="0" -s support_brim_line_count="20" -s blackmagic="0" -s infill_support_enabled="False" -s raft_interface_speed="22.5" -s travel_avoid_distance="0.625" -s support_bottom_enable="False" -s dual="0" -s cross_infill_pocket_size="1.25" -s wall_line_width_0="0.4" -s support_top_distance="0.1" -s retraction_hop_after_extruder_switch="True" -s support_bottom_offset="0.0" -s bridge_wall_speed="15.0" -s meshfix_union_all="True" -s support_z_distance="0.1" -s material_guid="0ff92885-617b-4144-a03c-9989872454bc" -s ironing_line_spacing="0.1" -s mold_enabled="False" -s jerk_travel_layer_0="30.0" -s support_connect_zigzags="True" -s spaghetti_infill_extra_volume="0" -s spaghetti_flow="20" -s magic_fuzzy_skin_point_dist="0.8" -s filter_out_tiny_gaps="True" -s bridge_skin_speed_3="15.0" -s default_material_print_temperature="200" -s roofing_layer_count="0" -s mold_angle="40" -s raft_speed="30.0" -s raft_fan_speed="0" -s material_anti_ooze_retracted_position="-4" -s jerk_print_layer_0="20" -s meshfix="0" -s acceleration_skirt_brim="3000" -s jerk_layer_0="20" -s switch_extruder_extra_prime_amount="0" -s jerk_ironing="20" -s roofing_angles="[ ]" -s top_skin_expand_distance="1.6" -s acceleration_ironing="3000" -s prime_tower_flow="100" -s support_tree_branch_diameter="2" -s machine_steps_per_mm_y="50" -s bridge_wall_material_flow="50" -s wall_min_flow_retract="False" -s connect_infill_polygons="False" -s machine_extruder_start_code="" -s travel="0" -s xy_offset_layer_0="0" -s cool_fan_speed_max="80" -s wall_overhang_angle="90" -s cool_fan_enabled="True" -s support_infill_sparse_thickness="0.1" -s support_roof_height="1.2" -s clean_between_layers="False" -s skin_preshrink="1.6" -s raft_surface_acceleration="3000" -s wall_0_wipe_dist="0.2" -s material_linear_advance_factor_wall_0="0" -s sub_div_rad_add="0.4" -s bottom_skin_preshrink="1.6" -s support_xy_distance_overhang="0.2" -s infill_enable_travel_optimization="False" -s speed_layer_0="12" -s speed_wall_x="60.0" -s raft_base_jerk="20" -s magic_fuzzy_skin_enabled="False" -s prime_tower_min_volume="6" -s machine_nozzle_id="unknown" -s wipe_brush_pos_x="100" -s acceleration_travel_layer_0="5000.0" -s speed_equalize_flow_max="150" -s bridge_skin_support_threshold="50" -s material_end_of_filament_purge_speed="0.5" -s raft_margin="15" -s support_offset="0" -s material_flow="100" -s material_linear_advance_factor_wall_x="0" -s acceleration_print="3000" -s multiple_mesh_overlap="0.15" -s wipe_retraction_retract_speed="35" -s cool_min_layer_time="5" -s material_linear_advance_factor="0" -s machine_extruder_start_pos_abs="False" -s acceleration_support="3000" -s support="0" -s spaghetti_infill_enabled="False" -s retraction_hop_after_extruder_switch_height="1" -s machine_extruder_end_pos_abs="False" -s material_linear_advance_factor_infill="0" -s minimum_roof_area="1.0" -s machine_extruder_cooling_fan_number="0" -s speed_support_bottom="40.0" -s material_extrusion_cool_down_speed="0.7" -s wipe_repeat_count="5" -s meshfix_maximum_resolution="0.5" -s gradual_support_infill_step_height="1" -s raft_acceleration="3000" -s support_bottom_height="1" -s acceleration_support_roof="3000" -s support_roof_offset="0.0" -s wall_material_flow="100" -s material_flow_layer_0="100" -s meshfix_union_all_remove_holes="False" -s skin_edge_support_thickness="0" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s support_wall_count="0" -s material_diameter="1.75" -s travel_compensate_overlapping_walls_x_enabled="True" -s speed_print_layer_0="12" -s raft_jerk="20" -s xy_offset="0" -s speed_infill="60" -s cool_lift_head="False" -s speed_wall_0="30.0" -s outer_inset_first="False" -s gradual_infill_step_height="1.5" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s support_join_distance="2.0" -s wipe_hop_amount="1" -s wipe_retraction_enable="True" -s infill_wipe_dist="0.1" -s connect_skin_polygons="False" -s infill_pattern="gyroid" -s line_width="0.4" -s optimize_wall_printing_order="False" -s wipe_retraction_amount="3" -s material_break_temperature="50" -s top_skin_preshrink="1.6" -s acceleration_roofing="3000" -s retraction_hop_enabled="False" -s switch_extruder_retraction_speed="20" -s support_bottom_stair_step_width="5.0" -s platform_adhesion="0" -s machine_steps_per_mm_x="50" -s z_seam_x="100.0" -s retraction_combing_max_distance="0" -s speed_equalize_flow_enabled="False" -s wall_line_width="0.4" -s skin_material_flow="100" -s support_bottom_density="100" -s acceleration_wall_x="3000" -s machine_nozzle_cool_down_speed="2.0" -s skirt_brim_material_flow="100" -s bridge_skin_speed="15.0" -s cool_min_layer_time_fan_speed_max="10" -s prime_blob_enable="False" -s meshfix_keep_open_polygons="False" -s support_tower_maximum_supported_diameter="3.0" -s material_break_speed="25" -s speed_support="60" -s ironing_inset="0.2" -s bridge_fan_speed_3="0" -s jerk_print="20" -s bottom_skin_expand_distance="1.6" -s z_seam_y="200" -s speed_support_roof="40.0" -s support_bottom_angles="[ ]" -s support_interface_line_width="0.4" -s support_interface_enable="False" -s bridge_skin_density_3="80" -s shell="0" -s support_infill_angles="[ ]" -s gradual_support_infill_steps="0" -s infill_sparse_density="32" -s jerk_support_interface="20" -s skirt_brim_minimal_length="250" -s raft_surface_layers="2" -s brim_line_count="8" -s support_roof_line_distance="0.4" -s prime_tower_line_width="0.4" -s infill_line_width="0.4" -s magic_fuzzy_skin_outside_only="False" -s roofing_pattern="lines" -s support_interface_material_flow="100" -s infill_overlap="15" -s extruder_nr="0" -s jerk_support_bottom="20" -s support_roof_angles="[ ]" -s bottom_thickness="0.8" -s support_interface_angles="[ ]" -s small_feature_max_length="0.0" -s skin_overlap_mm="0.02" -s retraction_retract_speed="35" -s zig_zaggify_infill="False" -s infill_overlap_mm="0.06" -s mesh_position_z="0" -s conical_overhang_angle="50" -s bridge_skin_density="100" -s wall_min_flow="0" -s ironing_flow="10.0" -s support_tree_branch_diameter_angle="5" -s jerk_roofing="20" -s speed="0" -s wipe_retraction_extra_prime_amount="0" -s skirt_line_count="4" -s retraction_count_max="90" -s support_xy_overrides_z="z_overrides_xy" -s machine_nozzle_tip_outer_diameter="1" -s min_infill_area="0" -s magic_fuzzy_skin_thickness="0.3" -s meshfix_extensive_stitching="False" -s material_flow_dependent_temperature="False" -s bottom_layers="6" -s infill_offset_y="0" -s support_brim_width="8.0" -s machine_nozzle_head_distance="3" -s cross_support_density_image="" -s z_seam_relative="False" -s slicing_tolerance="exclusive" -s machine_extruder_end_pos_y="0" -s skirt_gap="3" -s infill_material_flow="100" -s material_break_preparation_temperature="217" -s jerk_travel="30" -s material_linear_advance_factor_skirt_brim="0" -s machine_endstop_positive_direction_x="False" -s material_final_print_temperature="202" -s wall_line_count="4" -s magic_fuzzy_skin_point_density="1.25" -s infill_randomize_start_location="False" -s mesh_position_y="0" -s bridge_skin_material_flow_2="100" -s speed_support_interface="40.0" -s bridge_skin_density_2="75" -s machine_extruder_start_pos_x="0" -s support_tower_diameter="3.0" -s machine_min_cool_heat_time_window="50.0" -s layer_start_x="0.0" -s wall_line_width_x="0.4" -s jerk_support="20" -s bridge_skin_speed_2="15.0" -s top_thickness="0.8" -s material="0" -s infill_before_walls="True" -s small_hole_max_size="0" -s acceleration_wall_0="3000" -s max_skin_angle_for_expansion="90" -s material_surface_energy="100" -s raft_interface_line_width="0.8" -s infill_offset_x="0" -s support_zag_skip_count="8" -s machine_filament_park_distance="16" -s fill_outline_gaps="False" -s cross_infill_density_image="" -s raft_surface_fan_speed="0" -s spaghetti_infill_stepped="True" -s machine_endstop_positive_direction_y="False" -s minimum_bottom_area="1.0" -s infill_line_distance="1.25" -s z_seam_position="back" -s top_layers="6" -s material_linear_advance_factor_prime_tower="0" -s retraction_prime_speed="35" -s z_seam_type="random" -s material_no_load_move_factor="0.940860215" -s raft_surface_line_spacing="0.4" -s infill="0" -s coasting_speed="90" -s support_roof_material_flow="100" -s travel_avoid_supports="False" -s acceleration_infill="3000" -s machine_nozzle_size="0.4" -s raft_interface_jerk="20" -s material_shrinkage_percentage="0" -s retraction_speed="35" -s wall_0_material_flow="100" -s support_tree_branch_distance="1" -s wall_x_material_flow="100" -s min_skin_width_for_expansion="3.67394039744206e-17" -s mesh_position_x="0" -s expand_skins_expand_distance="1.6" -s material_linear_advance_factor_support="0" -s speed_ironing="20.0" -s limit_support_retractions="True" -s support_roof_line_width="0.4" -s jerk_wall="20" -s raft_base_acceleration="3000" -s retraction_extrusion_window="3" -s machine_extruder_start_pos_y="0" -s support_fan_enable="False" -s small_feature_speed_factor_0="50" -s coasting_volume="0.064" -s machine_endstop_positive_direction_z="True" -s skirt_brim_line_width="0.4" -s center_object="False" -s top_bottom_pattern="lines" -s mold_width="5" -s jerk_support_infill="20" -s wall_overhang_speed_factor="100" -s infill_support_angle="40" -s raft_surface_jerk="20" -s bridge_sparse_infill_max_density="0" -s speed_roofing="30.0" -s support_bottom_stair_step_height="0.3" -s brim_outside_only="True" -s material_standby_temperature="175" -s support_xy_distance="0.7" -s speed_wall="30.0" -s travel_compensate_overlapping_walls_enabled="True" -s acceleration_topbottom="3000" -s machine_settings="0" -s ironing_only_highest_layer="False" -s support_brim_enable="False" -s cool_fan_full_at_height="0.3" -s support_conical_angle="30" -s wall_0_inset="0" -s speed_support_infill="60" -s raft_base_line_spacing="1.6" -s max_extrusion_before_wipe="10" -s brim_width="8.0" -s layer_0_z_overlap="0.15" -s ironing_pattern="zigzag" -s speed_travel="150" -s jerk_topbottom="20" -s raft_interface_fan_speed="0" -s fill_perimeter_gaps="everywhere" -s prime_tower_wipe_enabled="True" -s spaghetti_max_height="2.0" -s support_roof_density="100" -s acceleration_print_layer_0="3000" -s acceleration_support_bottom="3000" -s material_end_of_filament_purge_length="20" -s material_break_preparation_speed="2" -s retraction_min_travel="0.8" -s acceleration_layer_0="3000" -s support_pattern="lines" -s support_line_distance="2.6666666666666665" -s retraction_enable="True" -s support_interface_density="100" -s coasting_enable="False" -s machine_feeder_wheel_diameter="10.0" -s retraction_hop_only_when_collides="False" -s material_break_retracted_position="-50" -s material_initial_print_temperature="207" -s material_print_temperature_layer_0="217" -s support_tree_collision_resolution="0.2" -s raft_base_fan_speed="0" -s machine_heat_zone_length="16" -s gradual_infill_steps="0" -s raft_airgap="0.3" -s material_flush_purge_speed="0.5" -s infill_angles="[ ]" -s minimum_interface_area="1.0" -s machine_extruder_end_code="" -s skin_line_width="0.4" -s raft_surface_thickness="0.1" -s material_linear_advance_factor_wall="0" -s coasting_min_volume="0.8" -s initial_layer_line_width_factor="100.0" -s bridge_enable_more_layers="True" -s jerk_infill="20" -s switch_extruder_retraction_speeds="20" -s spaghetti_inset="0.2" -s material_linear_advance_factor_support_interface="0" -s bridge_skin_material_flow="60" -s material_print_temperature="217" -s wipe_hop_speed="10" -s cooling="0" -s raft_base_thickness="0.36" -g -e0 -l "0" -s extruder_nr="0"
2020-03-08 09:53:36,269 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-03-08 09:53:40,908 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 217 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-08 09:53:41,061 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-08 09:53:41,064 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-08 09:53:41,085 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [663]: Slicing took 7.69221305847168 seconds
2020-03-08 09:53:41,085 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [664]: Number of models per buildplate: {0: 1}
2020-03-08 09:53:41,085 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [678]: See if there is more to slice...
2020-03-08 09:53:41,634 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [181]: Socket state changed to Closing
2020-03-08 09:53:41,637 - DEBUG - [MainThread] UM.Backend.Backend._onSocketError [203]: Socket debug: Arcus Error (13): Closing socket because other side requested close.
2020-03-08 09:53:41,639 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [183]: Socket state changed to Closed
2020-03-08 09:53:41,640 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onBackendQuit [829]: Backend quit with return code 0. Resetting process and socket.
2020-03-08 09:53:44,574 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.disconnect [315]: Connection with instance RedLeader with url http://192.168.2.171:5000/ stopped
2020-03-08 09:53:44,586 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-08 09:53:44,588 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device RedLeader already added
2020-03-08 09:53:44,589 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [303]: Connection with instance RedLeader with url http://192.168.2.171:5000/ started
2020-03-08 09:53:44,597 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/Resources/qml/UM/Dialog.qml:86:13: QML Loader: Binding loop detected for property "active"
2020-03-08 09:53:44,641 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device RedLeader already added
2020-03-08 09:53:44,673 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [741]: Set OctoPrint camera url to http://octolinux.local:8080/?action=stream
2020-03-08 09:53:45,160 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [215]: Trying to access OctoPrint instance at http://192.168.2.171:5000/ with the provided API key.
2020-03-08 09:53:45,293 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [418]: API key accepted by OctoPrint.
2020-03-08 09:54:07,105 - DEBUG - [MainThread] LinearAdvanceSettingPlugin.LinearAdvanceSettingPlugin._filterGcode [109]: No used extruders specify a linear advance factor
2020-03-08 09:54:07,365 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.requestWrite [374]: Tried starting a print, but current state is offline
2020-03-08 09:54:07,398 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._processRequest [308]: Request [4dcf8a14b20b49b9a2d5619e8fdf51b2] started
2020-03-08 09:54:07,401 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-08 09:54:08,338 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestFinished [369]: Request [4dcf8a14b20b49b9a2d5619e8fdf51b2] finished.
2020-03-08 09:54:08,342 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-08 09:54:08,343 - INFO - [MainThread] SliceInfoPlugin.SliceInfo._onRequestFinished [275]: SliceInfo sent successfully
2020-03-08 09:54:09,449 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-03-08 09:54:21,865 - INFO - [MainThread] cura.UI.MachineActionManager.addDefaultMachineActions [72]: Default machine actions added for machine definition [monoprice_select_mini_v2]
2020-03-08 09:54:21,967 - INFO - [MainThread] cura.Settings.GlobalStack.addExtruder [184]: Extruder[monoprice_select_mini_v2_extruder_0 #2] added to [Monoprice Select Mini V2 (E3D)] at position [0]
2020-03-08 09:54:21,970 - WARNING - [MainThread] cura.Settings.ExtruderManager.registerExtruder [156]: Extruder [monoprice_select_mini_v2_extruder_0 #2] has already been registered on machine [Monoprice Select Mini V2 (E3D)], not doing anything
2020-03-08 09:54:21,973 - INFO - [MainThread] UM.Logger.info [112]: Initializing Active Machine...
2020-03-08 09:54:21,981 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-08 09:54:21,983 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-08 09:54:22,149 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-08 09:54:22,152 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [303]: Connection with instance R2D2 with url http://192.168.2.171:5001/ started
2020-03-08 09:54:22,169 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/SettingsMenu.qml:51: TypeError: Cannot read property 'isEnabled' of undefined
2020-03-08 09:54:22,172 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/SettingsMenu.qml:44: TypeError: Cannot read property 'isEnabled' of undefined
2020-03-08 09:54:22,175 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/MaterialMenu.qml:26: TypeError: Cannot read property 'isEnabled' of undefined
2020-03-08 09:54:22,177 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/MaterialMenu.qml:28: TypeError: Cannot read property 'material' of undefined
2020-03-08 09:54:22,180 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-08 09:54:22,521 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-08 09:54:22,523 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-08 09:54:22,534 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-08 09:54:22,544 - INFO - [Thread-7] STLReader.STLReader.load_file [51]: Using NumPy-STL to load STL data.
2020-03-08 09:54:22,551 - DEBUG - [Thread-7] UM.Mesh.MeshData.calculateNormalsFromVertices [495]: Calculating normals took 0.0003600120544433594 seconds
2020-03-08 09:54:22,551 - DEBUG - [Thread-7] STLReader.STLReader._read [102]: Loaded a mesh with 1746 vertices
2020-03-08 09:54:22,582 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device R2D2 already added
2020-03-08 09:54:22,589 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [741]: Set OctoPrint camera url to http://octolinux.local:8080/?action=stream
2020-03-08 09:54:22,623 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [135]: New error check scheduled.
2020-03-08 09:54:23,571 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-08 09:54:23,577 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [63]: Updating QualityProfilesDropDownMenuModel.
2020-03-08 09:54:23,913 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-08 09:54:23,915 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [63]: Updating QualityProfilesDropDownMenuModel.
2020-03-08 09:54:24,231 - INFO - [MainThread] cura.Machines.MachineErrorChecker._setResult [187]: Error check finished, result = False, time = 1.6s
2020-03-08 09:54:25,614 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [225]: Starting to slice...
2020-03-08 09:54:25,614 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [243]: Going to slice build plate [0]!
2020-03-08 09:54:25,626 - DEBUG - [MainThread] UM.Backend.Backend._createSocket [213]: Previous socket existed. Closing that first.
2020-03-08 09:54:25,634 - WARNING - [Thread-8] UM.Decorators.deprecated_function [20]: <function GlobalStack.extruders at 0x600007dd1a88> is deprecated (since 4.4): Please use extruderList instead.
2020-03-08 09:54:25,670 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [173]: Socket state changed to Listening
2020-03-08 09:54:25,818 - INFO - [MainThread] UM.Backend.Backend.startEngine [81]: Started engine process: /Applications/Ultimaker Cura 3.app/Contents/MacOS/CuraEngine
2020-03-08 09:54:25,823 - DEBUG - [MainThread] UM.Backend.Backend._backendLog [101]: [Backend] Calling engine with: ['/Applications/Ultimaker Cura 3.app/Contents/MacOS/CuraEngine', 'connect', '127.0.0.1:49674', '']
2020-03-08 09:54:25,826 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [177]: Socket state changed to Connected
2020-03-08 09:54:25,828 - DEBUG - [MainThread] UM.Backend.Backend._onSocketStateChanged [167]: Backend connected on port 49674
2020-03-08 09:54:25,830 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-03-08 09:54:25,833 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] Cura_SteamEngine version 4.5.0
2020-03-08 09:54:25,835 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] Copyright (C) 2019 Ultimaker
2020-03-08 09:54:25,837 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-03-08 09:54:25,840 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] This program is free software: you can redistribute it and/or modify
2020-03-08 09:54:25,842 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] it under the terms of the GNU Affero General Public License as published by
2020-03-08 09:54:25,886 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] the Free Software Foundation, either version 3 of the License, or
2020-03-08 09:54:25,890 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] (at your option) any later version.
2020-03-08 09:54:25,892 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-03-08 09:54:25,894 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] This program is distributed in the hope that it will be useful,
2020-03-08 09:54:25,896 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] but WITHOUT ANY WARRANTY; without even the implied warranty of
2020-03-08 09:54:25,907 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
2020-03-08 09:54:25,909 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] GNU Affero General Public License for more details.
2020-03-08 09:54:25,911 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-03-08 09:54:25,914 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] You should have received a copy of the GNU Affero General Public License
2020-03-08 09:54:25,915 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] along with this program.  If not, see <http://www.gnu.org/licenses/>.
2020-03-08 09:54:26,028 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onStartSliceCompleted [429]: Sending slice message took 0.41314697265625 seconds
2020-03-08 09:54:26,277 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING]  -s speed_prime_tower="50" -s print_bed_temperature="60" -s machine_steps_per_mm_z="50" -s wall_0_extruder_nr="-1" -s support_interface_skip_height="0.3" -s support_initial_layer_line_distance="2.3333333333333335" -s retract_at_layer_change="False" -s support_bottom_extruder_nr="0" -s minimum_support_area="0.0" -s bridge_wall_coast="100" -s material_bed_temp_wait="True" -s magic_spiralize="False" -s support_bottom_line_width="0.35" -s machine_minimum_feedrate="0.0" -s small_feature_speed_factor="50" -s cool_fan_speed="100.0" -s support_enable="False" -s command_line_settings="0" -s raft_base_line_width="0.8" -s support_skip_some_zags="False" -s speed_print="50" -s machine_depth="120" -s raft_surface_speed="25.0" -s support_roof_enable="False" -s alternate_extra_perimeter="False" -s skin_angles="[ ]" -s cool_min_speed="10" -s jerk_skirt_brim="20" -s raft_interface_acceleration="3000" -s support_skip_zag_per_mm="20" -s roofing_material_flow="100" -s machine_name="Monoprice Select Mini V2" -s wipe_pause="0" -s wipe_retraction_prime_speed="40" -s support_use_towers="True" -s support_mesh="False" -s support_roof_pattern="concentric" -s travel_avoid_other_parts="True" -s support_interface_material_flow="100" -s infill_overlap="10" -s machine_max_feedrate_z="1.5" -s cool_fan_full_layer="2" -s support_bottom_line_distance="0.35" -s support_bottom_pattern="concentric" -s speed_topbottom="20" -s raft_smoothing="5" -s roofing_line_width="0.35" -s magic_mesh_surface_mode="normal" -s acceleration_prime_tower="3000" -s meshfix_maximum_deviation="0.05" -s speed_travel_layer_0="72.0" -s magic_fuzzy_skin_thickness="0.3" -s meshfix_extensive_stitching="False" -s raft_base_thickness="0.30625" -s support_type="everywhere" -s skin_edge_support_layers="0" -s draft_shield_dist="10" -s skin_no_small_gaps_heuristic="False" -s jerk_wall_x="20" -s retraction_min_travel="0.7" -s support_roof_line_width="0.35" -s bottom_thickness="0.72" -s retraction_extra_prime_amount="0" -s material_print_temperature_layer_0="215" -s acceleration_support="3000" -s top_bottom_extruder_nr="-1" -s adhesion_z_offset="0" -s mold_roof_height="0.5" -s support_extruder_nr_layer_0="0" -s meshfix_maximum_travel_resolution="0.7" -s clean_between_layers="False" -s wireframe_top_jump="0.6" -s top_bottom_pattern_0="lines" -s support_conical_min_width="5.0" -s machine_disallowed_areas="[]" -s gantry_height="120" -s material_surface_energy="100" -s jerk_wall="20" -s top_bottom_thickness="0.72" -s brim_line_count="15" -s support_roof_line_distance="0.35" -s jerk_support_interface="20" -s cool_fan_speed_min="100.0" -s wipe_move_distance="20" -s minimum_roof_area="1.0" -s brim_replaces_support="True" -s speed_z_hop="10" -s bridge_skin_material_flow="60" -s bridge_skin_material_flow_2="100" -s infill_sparse_thickness="0.13125" -s small_feature_speed_factor_0="50" -s raft_surface_line_width="0.35" -s infill_enable_travel_optimization="False" -s machine_heat_zone_length="16" -s material_end_of_filament_purge_speed="0.5" -s acceleration_support_infill="3000" -s brim_gap="0" -s layer_0_z_overlap="0.13125" -s infill_material_flow="100" -s speed_support_roof="25.0" -s wireframe_drag_along="0.6" -s print_temperature="210" -s xy_offset_layer_0="0" -s support_interface_height="1" -s ironing_pattern="zigzag" -s raft_interface_thickness="0.21875" -s travel_compensate_overlapping_walls_enabled="True" -s support_line_width="0.35" -s ooze_shield_enabled="False" -s support_interface_offset="0.0" -s support_tree_enable="False" -s retraction_hop_after_extruder_switch_height="1" -s bridge_skin_density_2="75" -s speed_wall_x="50" -s adhesion_type="skirt" -s default_material_bed_temperature="60" -s machine_max_jerk_z="0.4" -s support_tree_angle="40" -s material_linear_advance_factor_support_interface="0" -s conical_overhang_enabled="False" -s support_pattern="zigzag" -s extruder_prime_pos_y="0" -s jerk_layer_0="20" -s travel_compensate_overlapping_walls_0_enabled="True" -s sub_div_rad_add="0.35" -s infill_multiplier="1" -s support_infill_rate="15" -s material_anti_ooze_retracted_position="-4" -s jerk_print_layer_0="20" -s wireframe_roof_inset="3" -s cool_fan_speed_0="0" -s support_brim_line_count="23" -s blackmagic="0" -s infill_support_enabled="False" -s raft_interface_speed="18.75" -s travel_avoid_distance="0.625" -s support_bottom_enable="False" -s dual="0" -s cross_infill_pocket_size="3.1818181818181817" -s wall_line_width_0="0.35" -s support_top_distance="0.1" -s retraction_hop_after_extruder_switch="True" -s material_guid="" -s support_mesh_drop_down="True" -s ironing_line_spacing="0.1" -s mold_enabled="False" -s jerk_travel_layer_0="30.0" -s speed_slowdown_layers="2" -s default_material_print_temperature="210" -s roofing_layer_count="0" -s infill_mesh_order="0" -s support="0" -s spaghetti_infill_enabled="False" -s raft_fan_speed="0" -s machine_max_acceleration_y="800" -s meshfix="0" -s acceleration_skirt_brim="3000" -s switch_extruder_extra_prime_amount="0" -s wireframe_flow="100" -s jerk_ironing="20" -s roofing_angles="[ ]" -s top_skin_expand_distance="1.0499999999999998" -s acceleration_ironing="3000" -s prime_tower_flow="100" -s bridge_wall_material_flow="50" -s travel="0" -s switch_extruder_prime_speed="20" -s wall_x_extruder_nr="-1" -s cool_fan_speed_max="100.0" -s wall_overhang_angle="90" -s cool_fan_enabled="True" -s support_roof_height="1" -s material="0" -s infill_before_walls="True" -s material_bed_temp_prepend="True" -s wireframe_printspeed_bottom="5" -s skin_preshrink="1.0499999999999998" -s wall_0_wipe_dist="0.2" -s material_linear_advance_factor_wall_0="0" -s bottom_skin_preshrink="1.0499999999999998" -s support_xy_distance_overhang="0.2" -s machine_gcode_flavor="RepRap (Marlin/Sprinter)" -s wireframe_roof_fall_down="2" -s wireframe_strategy="compensate" -s machine_endstop_positive_direction_y="False" -s wireframe_top_delay="0" -s spaghetti_max_infill_angle="10" -s acceleration_support_interface="3000" -s speed_layer_0="30" -s time="09:54:25" -s machine_buildplate_type="glass" -s raft_base_jerk="20" -s machine_nozzle_id="unknown" -s wipe_brush_pos_x="100" -s acceleration_travel_layer_0="5000.0" -s speed_equalize_flow_max="150" -s bridge_skin_support_threshold="50" -s machine_max_jerk_e="5" -s raft_margin="5" -s wireframe_fall_down="0.5" -s support_offset="0" -s material_flow="100" -s cool_min_layer_time="5" -s material_linear_advance_factor="0" -s adhesion_z_offset_extensive_processing="False" -s meshfix_union_all="True" -s support_z_distance="0.1" -s material_linear_advance_factor_skirt_brim="0" -s layer_height_0="0.2625" -s bridge_fan_speed_2="0" -s initial_bottom_layers="6" -s support_interface_pattern="concentric" -s bridge_skin_material_flow_3="110" -s bridge_wall_speed="18.75" -s support_bottom_offset="0.0" -s material_linear_advance_factor_infill="0" -s material_print_temp_prepend="True" -s wireframe_printspeed_down="5" -s support_bottom_material_flow="100" -s ironing_enabled="False" -s acceleration_travel="5000" -s acceleration_wall="3000" -s raft_base_acceleration="3000" -s wall_extruder_nr="-1" -s skin_overlap="5" -s print_sequence="all_at_once" -s material_linear_advance_factor_prime_tower="0" -s retraction_prime_speed="40" -s z_seam_type="sharpest_corner" -s spaghetti_inset="0.2" -s speed_support_bottom="25.0" -s material_extrusion_cool_down_speed="0.7" -s wipe_repeat_count="5" -s meshfix_maximum_resolution="0.5" -s gradual_support_infill_step_height="1" -s adhesion_extruder_nr="0" -s mold_width="5" -s jerk_support_infill="20" -s wall_overhang_speed_factor="100" -s raft_acceleration="3000" -s support_bottom_height="1" -s acceleration_support_roof="3000" -s support_roof_offset="0.0" -s speed_roofing="20" -s support_bottom_stair_step_height="0.3" -s brim_outside_only="True" -s material_standby_temperature="150" -s raft_surface_layers="1" -s skirt_brim_minimal_length="250" -s travel_compensate_overlapping_walls_x_enabled="True" -s wireframe_flow_connection="100" -s machine_nozzle_expansion_angle="45" -s adaptive_layer_height_enabled="False" -s spaghetti_infill_extra_volume="0" -s support_connect_zigzags="True" -s jerk_support_roof="20" -s machine_extruder_count="1" -s wireframe_flow_flat="100" -s speed_print_layer_0="30" -s raft_jerk="20" -s prime_tower_min_volume="6" -s material_bed_temperature="60" -s draft_shield_height="10" -s retraction_combing_max_distance="0" -s z_seam_x="60.0" -s infill_line_distance="3.1818181818181817" -s minimum_bottom_area="1.0" -s xy_offset="0" -s extruders_enabled_count="1" -s machine_end_gcode="G0 X0 Y120;(Stick out the part)
2020-03-08 09:54:26,279 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] M190 S0;(Turn off heat bed, don't wait.)
2020-03-08 09:54:26,282 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] G92 E10;(Set extruder to 10)
2020-03-08 09:54:26,284 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] G1 E7 F200;(retract 3mm)
2020-03-08 09:54:26,286 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] M104 S0;(Turn off nozzle, don't wait)
2020-03-08 09:54:26,289 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] G4 S300;(Delay 5 minutes)
2020-03-08 09:54:26,291 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] M107;(Turn off part fan)
2020-03-08 09:54:26,293 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] M84;(Turn off stepper motors.)" -s machine_center_is_zero="False" -s jerk_print="20" -s magic_fuzzy_skin_point_dist="0.8" -s bridge_skin_speed_3="10" -s spaghetti_flow="20" -s filter_out_tiny_gaps="True" -s skin_outline_count="1" -s jerk_prime_tower="20" -s wireframe_nozzle_clearance="1" -s speed_infill="50" -s material_linear_advance_factor_topbottom="0" -s wireframe_enabled="False" -s skirt_line_count="2" -s retraction_count_max="90" -s gradual_support_infill_steps="0" -s connect_infill_polygons="False" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s connect_skin_polygons="False" -s infill_pattern="grid" -s infill_wipe_dist="0.0875" -s bottom_skin_expand_distance="1.0499999999999998" -s retraction_hop="1" -s jerk_wall_0="20" -s support_roof_extruder_nr="0" -s acceleration_enabled="False" -s machine_show_variants="True" -s gradual_infill_steps="0" -s jerk_infill="20" -s wall_0_inset="0.025000000000000022" -s relative_extrusion="False" -s wipe_retraction_amount="2.5" -s material_break_temperature="50" -s machine_steps_per_mm_y="50" -s wireframe_printspeed="5" -s support_tree_branch_diameter="2" -s wipe_hop_amount="1" -s support_join_distance="2.0" -s speed_equalize_flow_enabled="False" -s wall_line_width="0.35" -s skin_material_flow="100" -s support_bottom_density="100" -s flow_rate_extrusion_offset_factor="100" -s carve_multiple_volumes="False" -s acceleration_wall_x="3000" -s acceleration_roofing="3000" -s retraction_hop_enabled="False" -s switch_extruder_retraction_speed="20" -s top_skin_preshrink="1.0499999999999998" -s initial_layer_line_width_factor="100.0" -s machine_start_gcode="G21;(metric values)
2020-03-08 09:54:26,295 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] G90;(absolute positioning)
2020-03-08 09:54:26,298 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] M82;(set extruder to absolute mode)
2020-03-08 09:54:26,301 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] M107;(start with the fan off)
2020-03-08 09:54:26,303 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] G28;(Home the printer)
2020-03-08 09:54:26,305 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] G92 E0;(Reset the extruder to 0)
2020-03-08 09:54:26,307 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] G0 Z5 E5 F500;(Move up and prime the nozzle)
2020-03-08 09:54:26,309 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] G0 X-1 Z0;(Move outside the printable area)
2020-03-08 09:54:26,312 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] G1 Y60 E8 F500;(Draw a priming/wiping line to the rear)
2020-03-08 09:54:26,314 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] G1 X-1;(Move a little closer to the print area)
2020-03-08 09:54:26,316 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] G1 Y10 E16 F500;(draw more priming/wiping)
2020-03-08 09:54:26,318 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] G1 E15 F250;(Small retract)
2020-03-08 09:54:26,321 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] G92 E0;(Zero the extruder)" -s material_diameter="2.85" -s flow_rate_max_extrusion_offset="0" -s platform_adhesion="0" -s support_bottom_stair_step_width="5.0" -s machine_acceleration="4000" -s cool_min_layer_time_fan_speed_max="10" -s prime_blob_enable="False" -s meshfix_keep_open_polygons="False" -s machine_extruders_share_heater="False" -s speed_wall_0="37.5" -s cool_lift_head="False" -s material_break_speed="25" -s machine_max_acceleration_z="20" -s support_wall_count="0" -s skin_edge_support_thickness="0" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s wall_min_flow_retract="False" -s minimum_polygon_circumference="1.0" -s wipe_hop_speed="10" -s date="08-03-2020" -s speed_support="37.5" -s ironing_inset="0.175" -s wireframe_roof_outer_delay="0.2" -s bridge_fan_speed_3="0" -s z_seam_y="120" -s support_interface_enable="False" -s bridge_skin_density_3="80" -s shell="0" -s support_infill_angles="[ ]" -s infill_extruder_nr="-1" -s infill_sparse_density="22" -s wall_thickness="1.05" -s material_crystallinity="False" -s machine_steps_per_mm_e="1600" -s support_bottom_distance="0.1" -s prime_tower_line_width="0.35" -s spaghetti_infill_stepped="True" -s machine_max_feedrate_e="100" -s infill_line_width="0.35" -s magic_fuzzy_skin_outside_only="False" -s jerk_support_bottom="20" -s material_print_temp_wait="True" -s support_roof_angles="[ ]" -s support_interface_angles="[ ]" -s small_feature_max_length="0.0" -s skin_overlap_mm="0.0175" -s material_flush_purge_length="60" -s raft_interface_line_spacing="0.8999999999999999" -s machine_nozzle_heat_up_speed="2.0" -s adaptive_layer_height_threshold="0.2" -s top_thickness="0.72" -s bridge_skin_density="100" -s wall_min_flow="0" -s ironing_flow="10.0" -s support_tree_collision_resolution="0.175" -s raft_base_fan_speed="0" -s bridge_settings_enabled="False" -s support_roof_material_flow="100" -s machine_max_feedrate_y="150" -s alternate_carve_order="True" -s wipe_retraction_enable="True" -s day="Sun" -s support_tree_branch_diameter_angle="5" -s experimental="0" -s prime_tower_position_x="115.65" -s bridge_wall_min_length="5" -s machine_steps_per_mm_x="50" -s jerk_topbottom="20" -s remove_empty_first_layers="True" -s prime_tower_size="20" -s jerk_roofing="20" -s travel_speed="120" -s speed="0" -s cutting_mesh="False" -s machine_max_jerk_xy="20" -s material_adhesion_tendency="10" -s extruder_prime_pos_abs="False" -s nozzle_disallowed_areas="[]" -s support_interface_extruder_nr="0" -s support_tower_maximum_supported_diameter="3.0" -s wipe_retraction_extra_prime_amount="0" -s material_break_preparation_retracted_position="-16" -s infill_mesh="False" -s layer_height="0.13125" -s support_brim_width="8.0" -s machine_nozzle_head_distance="3" -s prime_tower_brim_enable="False" -s gradual_infill_step_height="1.5" -s outer_inset_first="False" -s support_tower_roof_angle="65" -s extruder_prime_pos_z="0" -s skirt_gap="3" -s machine_width="120" -s machine_max_feedrate_x="150" -s anti_overhang_mesh="False" -s travel_retract_before_outer_wall="False" -s machine_height="120" -s retraction_extrusion_window="2.5" -s support_fan_enable="False" -s coasting_enable="True" -s support_interface_density="100" -s support_material_flow="100" -s bridge_fan_speed="100" -s support_infill_extruder_nr="0" -s infill="0" -s coasting_speed="90" -s jerk_travel="30" -s ooze_shield_angle="60" -s machine_endstop_positive_direction_x="False" -s material_final_print_temperature="195" -s acceleration_print="3000" -s material_linear_advance_factor_wall_x="0" -s speed_support_infill="37.5" -s max_extrusion_before_wipe="10" -s raft_base_line_spacing="1.6" -s retraction_enable="True" -s support_line_distance="2.3333333333333335" -s material_print_temperature="210" -s mold_angle="40" -s raft_speed="25.0" -s retraction_amount="2.5" -s wipe_retraction_speed="40" -s support_tower_diameter="3.0" -s material_break_retracted_position="-50" -s material_initial_print_temperature="200" -s resolution="0" -s wireframe_printspeed_up="5" -s support_infill_sparse_thickness="0.13125" -s material_bed_temperature_layer_0="65" -s adaptive_layer_height_variation="0.1" -s cross_infill_density_image="" -s skirt_brim_speed="30" -s machine_nozzle_temp_enabled="True" -s material_maximum_park_duration="300" -s switch_extruder_retraction_amount="16" -s wall_line_width_x="0.35" -s jerk_support="20" -s bridge_skin_speed_2="10" -s raft_surface_fan_speed="0" -s max_skin_angle_for_expansion="90" -s raft_interface_line_width="0.7" -s infill_offset_x="0" -s magic_fuzzy_skin_enabled="False" -s jerk_enabled="False" -s support_zag_skip_count="9" -s machine_filament_park_distance="16" -s fill_outline_gaps="False" -s z_seam_position="back" -s infill_randomize_start_location="False" -s mesh_position_y="0" -s machine_max_acceleration_x="800" -s speed_support_interface="25.0" -s magic_fuzzy_skin_point_density="1.25" -s wall_line_count="3" -s wipe_retraction_retract_speed="40" -s multiple_mesh_overlap="0.15" -s z_seam_corner="z_seam_corner_inner" -s machine_head_with_fans_polygon="[[-20, 10], [10, 10], [10, -10], [-20, -10]]" -s wall_material_flow="100" -s material_flow_layer_0="100" -s retraction_combing="noskin" -s travel_avoid_supports="False" -s acceleration_infill="3000" -s machine_nozzle_size="0.4" -s raft_interface_jerk="20" -s material_shrinkage_percentage="0" -s material_break_preparation_temperature="210" -s bridge_skin_speed="10" -s skirt_brim_material_flow="100" -s retraction_speed="40" -s wall_0_material_flow="100" -s material_no_load_move_factor="0.940860215" -s raft_surface_line_spacing="0.35" -s material_anti_ooze_retraction_speed="5" -s support_conical_enabled="False" -s cross_support_density_image="" -s z_seam_relative="False" -s wireframe_height="3" -s smooth_spiralized_contours="True" -s wireframe_straight_before_down="20" -s infill_angles="[ ]" -s minimum_interface_area="1.0" -s draft_shield_enabled="False" -s machine_nozzle_cool_down_speed="2.0" -s speed_ironing="13.333333333333334" -s machine_max_acceleration_e="10000" -s limit_support_retractions="True" -s material_linear_advance_factor_support="0" -s support_tree_branch_distance="1" -s wall_x_material_flow="100" -s min_skin_width_for_expansion="4.8220467716427034e-17" -s prime_tower_position_y="95.65" -s mesh_position_x="0" -s expand_skins_expand_distance="1.0499999999999998" -s roofing_pattern="lines" -s small_hole_max_size="0" -s acceleration_wall_0="3000" -s support_interface_line_width="0.35" -s support_bottom_angles="[ ]" -s infill_wall_line_count="0" -s support_supported_skin_fan_speed="100" -s draft_shield_height_limitation="full" -s wireframe_printspeed_flat="5" -s skin_line_width="0.35" -s machine_firmware_retract="False" -s switch_extruder_retraction_speeds="20" -s top_layers="6" -s initial_extruder_nr="0" -s meshfix_union_all_remove_holes="False" -s support_brim_enable="False" -s cool_fan_full_at_height="0.2625" -s machine_heated_build_volume="False" -s support_conical_angle="30" -s brim_width="5" -s raft_interface_fan_speed="0" -s fill_perimeter_gaps="everywhere" -s prime_tower_wipe_enabled="True" -s spaghetti_max_height="2.0" -s support_roof_density="100" -s acceleration_topbottom="3000" -s machine_settings="0" -s ironing_only_highest_layer="False" -s wireframe_flat_delay="0.1" -s bridge_sparse_infill_max_density="0" -s wireframe_bottom_delay="0" -s line_width="0.35" -s optimize_wall_printing_order="False" -s zig_zaggify_support="False" -s wipe_hop_enable="False" -s acceleration_print_layer_0="3000" -s speed_travel="120" -s support_angle="50" -s raft_base_speed="18.75" -s machine_shape="rectangular" -s machine_heated_bed="True" -s machine_use_extruder_offset_to_offset_coords="True" -s wireframe_roof_drag_along="0.8" -s acceleration_support_bottom="3000" -s material_end_of_filament_purge_length="20" -s material_break_preparation_speed="2" -s acceleration_layer_0="3000" -s support_xy_overrides_z="z_overrides_xy" -s min_infill_area="0" -s machine_nozzle_tip_outer_diameter="1" -s cooling="0" -s raft_airgap="0.2625" -s material_flush_purge_speed="0.5" -s slicing_tolerance="middle" -s retraction_retract_speed="40" -s layer_start_y="0.0" -s build_volume_temperature="28" -s extruder_prime_pos_x="0" -s infill_overlap_mm="0.035" -s mesh_position_z="0" -s conical_overhang_angle="50" -s zig_zaggify_infill="False" -s raft_surface_acceleration="3000" -s wireframe_up_half_speed="0.3" -s bridge_enable_more_layers="True" -s raft_surface_thickness="0.13125" -s prime_tower_enable="False" -s material_linear_advance_factor_wall="0" -s coasting_min_volume="0.8" -s support_xy_distance="0.7" -s speed_wall="25.0" -s infill_support_angle="40" -s adaptive_layer_height_variation_step="0.01" -s raft_surface_jerk="20" -s layer_start_x="0.0" -s machine_min_cool_heat_time_window="50.0" -s ooze_shield_dist="2" -s material_flow_dependent_temperature="False" -s bottom_layers="6" -s infill_offset_y="0" -s machine_feeder_wheel_diameter="10.0" -s retraction_hop_only_when_collides="False" -s roofing_extruder_nr="-1" -s skirt_brim_line_width="0.35" -s center_object="False" -s top_bottom_pattern="lines" -s support_extruder_nr="0" -s coasting_volume="0.064" -s machine_endstop_positive_direction_z="True" -e0 -s speed_prime_tower="50" -s machine_steps_per_mm_z="50" -s jerk_support_roof="20" -s support_interface_skip_height="0.3" -s support_interface_offset="0.0" -s support_initial_layer_line_distance="2.3333333333333335" -s retract_at_layer_change="False" -s minimum_support_area="0.0" -s bridge_wall_coast="100" -s support_bottom_line_width="0.35" -s machine_nozzle_offset_x="0" -s small_feature_speed_factor="50" -s switch_extruder_prime_speed="20" -s cool_fan_speed="100.0" -s command_line_settings="0" -s experimental="0" -s raft_base_line_width="0.8" -s support_skip_some_zags="False" -s machine_nozzle_offset_y="0" -s speed_print="50" -s raft_surface_speed="25.0" -s support_roof_enable="False" -s alternate_extra_perimeter="False" -s skin_angles="[ ]" -s cool_min_speed="10" -s machine_extruder_end_pos_x="0" -s jerk_skirt_brim="20" -s raft_interface_acceleration="3000" -s material_break_preparation_retracted_position="-16" -s support_skip_zag_per_mm="20" -s roofing_material_flow="100" -s skin_overlap="5" -s wipe_pause="0" -s wipe_retraction_prime_speed="40" -s support_use_towers="True" -s support_roof_pattern="concentric" -s travel_avoid_other_parts="True" -s cool_fan_full_layer="2" -s support_bottom_line_distance="0.35" -s material_linear_advance_factor_topbottom="0" -s support_bottom_pattern="concentric" -s speed_topbottom="20" -s raft_smoothing="5" -s roofing_line_width="0.35" -s magic_mesh_surface_mode="normal" -s acceleration_prime_tower="3000" -s meshfix_maximum_deviation="0.05" -s speed_travel_layer_0="72.0" -s skin_edge_support_layers="0" -s skin_no_small_gaps_heuristic="False" -s wipe_hop_enable="False" -s zig_zaggify_support="False" -s bridge_fan_speed="100" -s support_material_flow="100" -s retraction_extra_prime_amount="0" -s support_supported_skin_fan_speed="100" -s infill_wall_line_count="0" -s acceleration_support_interface="3000" -s spaghetti_max_infill_angle="10" -s resolution="0" -s support_interface_pattern="concentric" -s bridge_skin_material_flow_3="110" -s initial_bottom_layers="6" -s bridge_fan_speed_2="0" -s mold_roof_height="0.5" -s meshfix_maximum_travel_resolution="0.7" -s extruder_prime_pos_x="0" -s layer_start_y="0.0" -s top_bottom_pattern_0="lines" -s support_conical_min_width="5.0" -s cool_fan_speed_min="100.0" -s wipe_move_distance="20" -s brim_replaces_support="True" -s extruder_prime_pos_z="0" -s support_tower_roof_angle="65" -s speed_z_hop="10" -s skirt_brim_speed="30" -s switch_extruder_retraction_amount="16" -s material_maximum_park_duration="300" -s machine_nozzle_temp_enabled="True" -s top_bottom_thickness="0.72" -s raft_base_speed="18.75" -s support_angle="50" -s machine_steps_per_mm_e="1600" -s material_crystallinity="False" -s support_bottom_distance="0.1" -s wall_thickness="1.05" -s material_flush_purge_length="60" -s machine_nozzle_heat_up_speed="2.0" -s raft_interface_line_spacing="0.8999999999999999" -s support_bottom_material_flow="100" -s acceleration_travel="5000" -s acceleration_wall="3000" -s ironing_enabled="False" -s raft_surface_line_width="0.35" -s acceleration_support_infill="3000" -s brim_gap="0" -s support_line_width="0.35" -s jerk_prime_tower="20" -s skin_outline_count="1" -s support_interface_height="1" -s support_conical_enabled="False" -s material_anti_ooze_retraction_speed="5" -s z_seam_corner="z_seam_corner_inner" -s wipe_retraction_speed="40" -s retraction_amount="2.5" -s raft_interface_thickness="0.21875" -s jerk_wall_0="20" -s retraction_hop="1" -s infill_sparse_thickness="0.13125" -s extruder_prime_pos_abs="False" -s material_adhesion_tendency="0" -s support_tree_angle="40" -s conical_overhang_enabled="False" -s extruder_prime_pos_y="0" -s travel_compensate_overlapping_walls_0_enabled="True" -s infill_multiplier="1" -s support_infill_rate="15" -s jerk_wall_x="20" -s cool_fan_speed_0="0" -s support_brim_line_count="23" -s blackmagic="0" -s infill_support_enabled="False" -s raft_interface_speed="18.75" -s travel_avoid_distance="0.625" -s support_bottom_enable="False" -s dual="0" -s cross_infill_pocket_size="7.0" -s wall_line_width_0="0.35" -s support_top_distance="0.1" -s retraction_hop_after_extruder_switch="True" -s support_bottom_offset="0.0" -s bridge_wall_speed="18.75" -s meshfix_union_all="True" -s support_z_distance="0.1" -s material_guid="0ff92885-617b-4144-a03c-9989872454bc" -s ironing_line_spacing="0.1" -s mold_enabled="False" -s jerk_travel_layer_0="30.0" -s support_connect_zigzags="True" -s spaghetti_infill_extra_volume="0" -s spaghetti_flow="20" -s magic_fuzzy_skin_point_dist="0.8" -s filter_out_tiny_gaps="True" -s bridge_skin_speed_3="10" -s default_material_print_temperature="200" -s roofing_layer_count="0" -s mold_angle="40" -s raft_speed="25.0" -s raft_fan_speed="0" -s material_anti_ooze_retracted_position="-4" -s jerk_print_layer_0="20" -s meshfix="0" -s acceleration_skirt_brim="3000" -s jerk_layer_0="20" -s switch_extruder_extra_prime_amount="0" -s jerk_ironing="20" -s roofing_angles="[ ]" -s top_skin_expand_distance="1.0499999999999998" -s acceleration_ironing="3000" -s prime_tower_flow="100" -s support_tree_branch_diameter="2" -s machine_steps_per_mm_y="50" -s bridge_wall_material_flow="50" -s wall_min_flow_retract="False" -s connect_infill_polygons="False" -s machine_extruder_start_code="" -s travel="0" -s xy_offset_layer_0="0" -s cool_fan_speed_max="100.0" -s wall_overhang_angle="90" -s cool_fan_enabled="True" -s support_infill_sparse_thickness="0.13125" -s support_roof_height="1" -s clean_between_layers="False" -s skin_preshrink="1.0499999999999998" -s raft_surface_acceleration="3000" -s wall_0_wipe_dist="0.2" -s material_linear_advance_factor_wall_0="0" -s sub_div_rad_add="0.35" -s bottom_skin_preshrink="1.0499999999999998" -s support_xy_distance_overhang="0.2" -s infill_enable_travel_optimization="False" -s speed_layer_0="30" -s speed_wall_x="50" -s raft_base_jerk="20" -s magic_fuzzy_skin_enabled="False" -s prime_tower_min_volume="6" -s machine_nozzle_id="unknown" -s wipe_brush_pos_x="100" -s acceleration_travel_layer_0="5000.0" -s speed_equalize_flow_max="150" -s bridge_skin_support_threshold="50" -s material_end_of_filament_purge_speed="0.5" -s raft_margin="5" -s support_offset="0" -s material_flow="100" -s material_linear_advance_factor_wall_x="0" -s acceleration_print="3000" -s multiple_mesh_overlap="0.15" -s wipe_retraction_retract_speed="40" -s cool_min_layer_time="5" -s material_linear_advance_factor="0" -s machine_extruder_start_pos_abs="False" -s acceleration_support="3000" -s support="0" -s spaghetti_infill_enabled="False" -s retraction_hop_after_extruder_switch_height="1" -s machine_extruder_end_pos_abs="False" -s material_linear_advance_factor_infill="0" -s minimum_roof_area="1.0" -s machine_extruder_cooling_fan_number="0" -s speed_support_bottom="25.0" -s material_extrusion_cool_down_speed="0.7" -s wipe_repeat_count="5" -s meshfix_maximum_resolution="0.5" -s gradual_support_infill_step_height="1" -s raft_acceleration="3000" -s support_bottom_height="1" -s acceleration_support_roof="3000" -s support_roof_offset="0.0" -s wall_material_flow="100" -s material_flow_layer_0="100" -s meshfix_union_all_remove_holes="False" -s skin_edge_support_thickness="0" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s support_wall_count="0" -s material_diameter="1.75" -s travel_compensate_overlapping_walls_x_enabled="True" -s speed_print_layer_0="30" -s raft_jerk="20" -s xy_offset="0" -s speed_infill="50" -s cool_lift_head="False" -s speed_wall_0="37.5" -s outer_inset_first="False" -s gradual_infill_step_height="1.5" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s support_join_distance="2.0" -s wipe_hop_amount="1" -s wipe_retraction_enable="True" -s infill_wipe_dist="0.0875" -s connect_skin_polygons="False" -s infill_pattern="grid" -s line_width="0.35" -s optimize_wall_printing_order="False" -s wipe_retraction_amount="2.5" -s material_break_temperature="50" -s top_skin_preshrink="1.0499999999999998" -s acceleration_roofing="3000" -s retraction_hop_enabled="False" -s switch_extruder_retraction_speed="20" -s support_bottom_stair_step_width="5.0" -s platform_adhesion="0" -s machine_steps_per_mm_x="50" -s z_seam_x="60.0" -s retraction_combing_max_distance="0" -s speed_equalize_flow_enabled="False" -s wall_line_width="0.35" -s skin_material_flow="100" -s support_bottom_density="100" -s acceleration_wall_x="3000" -s machine_nozzle_cool_down_speed="2.0" -s skirt_brim_material_flow="100" -s bridge_skin_speed="10" -s cool_min_layer_time_fan_speed_max="10" -s prime_blob_enable="False" -s meshfix_keep_open_polygons="False" -s support_tower_maximum_supported_diameter="3.0" -s material_break_speed="25" -s speed_support="37.5" -s ironing_inset="0.175" -s bridge_fan_speed_3="0" -s jerk_print="20" -s bottom_skin_expand_distance="1.0499999999999998" -s z_seam_y="120" -s speed_support_roof="25.0" -s support_bottom_angles="[ ]" -s support_interface_line_width="0.35" -s support_interface_enable="False" -s bridge_skin_density_3="80" -s shell="0" -s support_infill_angles="[ ]" -s gradual_support_infill_steps="0" -s infill_sparse_density="10" -s jerk_support_interface="20" -s skirt_brim_minimal_length="250" -s raft_surface_layers="1" -s brim_line_count="15" -s support_roof_line_distance="0.35" -s prime_tower_line_width="0.35" -s infill_line_width="0.35" -s magic_fuzzy_skin_outside_only="False" -s roofing_pattern="lines" -s support_interface_material_flow="100" -s infill_overlap="10" -s extruder_nr="0" -s jerk_support_bottom="20" -s support_roof_angles="[ ]" -s bottom_thickness="0.72" -s support_interface_angles="[ ]" -s small_feature_max_length="0.0" -s skin_overlap_mm="0.0175" -s retraction_retract_speed="40" -s zig_zaggify_infill="False" -s infill_overlap_mm="0.035" -s mesh_position_z="0" -s conical_overhang_angle="50" -s bridge_skin_density="100" -s wall_min_flow="0" -s ironing_flow="10.0" -s support_tree_branch_diameter_angle="5" -s jerk_roofing="20" -s speed="0" -s wipe_retraction_extra_prime_amount="0" -s skirt_line_count="2" -s retraction_count_max="90" -s support_xy_overrides_z="z_overrides_xy" -s machine_nozzle_tip_outer_diameter="1" -s min_infill_area="0" -s magic_fuzzy_skin_thickness="0.3" -s meshfix_extensive_stitching="False" -s material_flow_dependent_temperature="False" -s bottom_layers="6" -s infill_offset_y="0" -s support_brim_width="8.0" -s machine_nozzle_head_distance="3" -s cross_support_density_image="" -s z_seam_relative="False" -s slicing_tolerance="middle" -s machine_extruder_end_pos_y="0" -s skirt_gap="3" -s infill_material_flow="100" -s material_break_preparation_temperature="200" -s jerk_travel="30" -s material_linear_advance_factor_skirt_brim="0" -s machine_endstop_positive_direction_x="False" -s material_final_print_temperature="185" -s wall_line_count="3" -s magic_fuzzy_skin_point_density="1.25" -s infill_randomize_start_location="False" -s mesh_position_y="0" -s bridge_skin_material_flow_2="100" -s speed_support_interface="25.0" -s bridge_skin_density_2="75" -s machine_extruder_start_pos_x="0" -s support_tower_diameter="3.0" -s machine_min_cool_heat_time_window="50.0" -s layer_start_x="0.0" -s wall_line_width_x="0.35" -s jerk_support="20" -s bridge_skin_speed_2="10" -s top_thickness="0.72" -s material="0" -s infill_before_walls="True" -s small_hole_max_size="0" -s acceleration_wall_0="3000" -s max_skin_angle_for_expansion="90" -s material_surface_energy="100" -s raft_interface_line_width="0.7" -s infill_offset_x="0" -s support_zag_skip_count="9" -s machine_filament_park_distance="16" -s fill_outline_gaps="False" -s cross_infill_density_image="" -s raft_surface_fan_speed="0" -s spaghetti_infill_stepped="True" -s machine_endstop_positive_direction_y="False" -s minimum_bottom_area="1.0" -s infill_line_distance="7.0" -s z_seam_position="back" -s top_layers="6" -s material_linear_advance_factor_prime_tower="0" -s retraction_prime_speed="40" -s z_seam_type="sharpest_corner" -s material_no_load_move_factor="0.940860215" -s raft_surface_line_spacing="0.35" -s infill="0" -s coasting_speed="90" -s support_roof_material_flow="100" -s travel_avoid_supports="False" -s acceleration_infill="3000" -s machine_nozzle_size="0.4" -s raft_interface_jerk="20" -s material_shrinkage_percentage="0" -s retraction_speed="40" -s wall_0_material_flow="100" -s support_tree_branch_distance="1" -s wall_x_material_flow="100" -s min_skin_width_for_expansion="4.8220467716427034e-17" -s mesh_position_x="0" -s expand_skins_expand_distance="1.0499999999999998" -s material_linear_advance_factor_support="0" -s speed_ironing="13.333333333333334" -s limit_support_retractions="True" -s support_roof_line_width="0.35" -s jerk_wall="20" -s raft_base_acceleration="3000" -s retraction_extrusion_window="2.5" -s machine_extruder_start_pos_y="0" -s support_fan_enable="False" -s small_feature_speed_factor_0="50" -s coasting_volume="0.064" -s machine_endstop_positive_direction_z="True" -s skirt_brim_line_width="0.35" -s center_object="False" -s top_bottom_pattern="lines" -s mold_width="5" -s jerk_support_infill="20" -s wall_overhang_speed_factor="100" -s infill_support_angle="40" -s raft_surface_jerk="20" -s bridge_sparse_infill_max_density="0" -s speed_roofing="20" -s support_bottom_stair_step_height="0.3" -s brim_outside_only="True" -s material_standby_temperature="175" -s support_xy_distance="0.7" -s speed_wall="25.0" -s travel_compensate_overlapping_walls_enabled="True" -s acceleration_topbottom="3000" -s machine_settings="0" -s ironing_only_highest_layer="False" -s support_brim_enable="False" -s cool_fan_full_at_height="0.2625" -s support_conical_angle="30" -s wall_0_inset="0.025000000000000022" -s speed_support_infill="37.5" -s raft_base_line_spacing="1.6" -s max_extrusion_before_wipe="10" -s brim_width="5" -s layer_0_z_overlap="0.13125" -s ironing_pattern="zigzag" -s speed_travel="120" -s jerk_topbottom="20" -s raft_interface_fan_speed="0" -s fill_perimeter_gaps="everywhere" -s prime_tower_wipe_enabled="True" -s spaghetti_max_height="2.0" -s support_roof_density="100" -s acceleration_print_layer_0="3000" -s acceleration_support_bottom="3000" -s material_end_of_filament_purge_length="20" -s material_break_preparation_speed="2" -s retraction_min_travel="0.7" -s acceleration_layer_0="3000" -s support_pattern="zigzag" -s support_line_distance="2.3333333333333335" -s retraction_enable="True" -s support_interface_density="100" -s coasting_enable="True" -s machine_feeder_wheel_diameter="10.0" -s retraction_hop_only_when_collides="False" -s material_break_retracted_position="-50" -s material_initial_print_temperature="190" -s material_print_temperature_layer_0="205" -s support_tree_collision_resolution="0.175" -s raft_base_fan_speed="0" -s machine_heat_zone_length="16" -s gradual_infill_steps="0" -s raft_airgap="0.2625" -s material_flush_purge_speed="0.5" -s infill_angles="[ ]" -s minimum_interface_area="1.0" -s machine_extruder_end_code="" -s skin_line_width="0.35" -s raft_surface_thickness="0.13125" -s material_linear_advance_factor_wall="0" -s coasting_min_volume="0.8" -s initial_layer_line_width_factor="100.0" -s bridge_enable_more_layers="True" -s jerk_infill="20" -s switch_extruder_retraction_speeds="20" -s spaghetti_inset="0.2" -s material_linear_advance_factor_support_interface="0" -s bridge_skin_material_flow="60" -s material_print_temperature="200" -s wipe_hop_speed="10" -s cooling="0" -s raft_base_thickness="0.30625" -g -e0 -l "0" -s extruder_nr="0"
2020-03-08 09:54:29,579 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-08 09:54:29,582 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-08 09:54:29,593 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [663]: Slicing took 3.9784178733825684 seconds
2020-03-08 09:54:29,593 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [664]: Number of models per buildplate: {0: 1}
2020-03-08 09:54:29,593 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [678]: See if there is more to slice...
2020-03-08 09:54:29,811 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [181]: Socket state changed to Closing
2020-03-08 09:54:29,815 - DEBUG - [MainThread] UM.Backend.Backend._onSocketError [203]: Socket debug: Arcus Error (13): Closing socket because other side requested close.
2020-03-08 09:54:29,818 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [183]: Socket state changed to Closed
2020-03-08 09:54:29,818 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onBackendQuit [829]: Backend quit with return code 0. Resetting process and socket.
2020-03-08 09:54:32,273 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-03-08 09:54:36,317 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.disconnect [315]: Connection with instance R2D2 with url http://192.168.2.171:5001/ stopped
2020-03-08 09:54:36,327 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-08 09:54:36,329 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device R2D2 already added
2020-03-08 09:54:36,330 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [303]: Connection with instance R2D2 with url http://192.168.2.171:5001/ started
2020-03-08 09:54:36,338 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/Resources/qml/UM/Dialog.qml:86:13: QML Loader: Binding loop detected for property "active"
2020-03-08 09:54:36,405 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device R2D2 already added
2020-03-08 09:54:36,426 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [741]: Set OctoPrint camera url to http://octolinux.local:8080/?action=stream
2020-03-08 09:54:36,917 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [215]: Trying to access OctoPrint instance at http://192.168.2.171:5001/ with the provided API key.
2020-03-08 09:54:37,000 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [418]: API key accepted by OctoPrint.
2020-03-08 09:54:40,949 - DEBUG - [MainThread] LinearAdvanceSettingPlugin.LinearAdvanceSettingPlugin._filterGcode [109]: No used extruders specify a linear advance factor
2020-03-08 09:54:41,033 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.requestWrite [374]: Tried starting a print, but current state is offline
2020-03-08 09:54:41,062 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._processRequest [308]: Request [982dc147a97f453191cf82de13b6e180] started
2020-03-08 09:54:41,066 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-08 09:54:41,410 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestFinished [369]: Request [982dc147a97f453191cf82de13b6e180] finished.
2020-03-08 09:54:41,413 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-08 09:54:41,414 - INFO - [MainThread] SliceInfoPlugin.SliceInfo._onRequestFinished [275]: SliceInfo sent successfully
2020-03-08 09:54:43,169 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-03-08 09:57:44,424 - INFO - [MainThread] cura.UI.MachineActionManager.addDefaultMachineActions [56]: Default machine actions have been added for machine definition [wanhao_i3plus], do nothing.
2020-03-08 09:57:44,437 - WARNING - [MainThread] cura.Settings.GlobalStack.addExtruder [179]: Extruder [wanhao_i3plus_extruder_0 #6] has already been added to this stack [Wanhao Duplicator i3 Plus #2]
2020-03-08 09:57:44,440 - WARNING - [MainThread] cura.Settings.ExtruderManager.registerExtruder [156]: Extruder [wanhao_i3plus_extruder_0 #6] has already been registered on machine [Wanhao Duplicator i3 Plus #2], not doing anything
2020-03-08 09:57:44,444 - INFO - [MainThread] UM.Logger.info [112]: Initializing Active Machine...
2020-03-08 09:57:44,453 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-08 09:57:44,456 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-08 09:57:44,581 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-08 09:57:44,584 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [303]: Connection with instance RedLeader with url http://192.168.2.171:5000/ started
2020-03-08 09:57:44,599 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/SettingsMenu.qml:51: TypeError: Cannot read property 'isEnabled' of undefined
2020-03-08 09:57:44,601 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/SettingsMenu.qml:44: TypeError: Cannot read property 'isEnabled' of undefined
2020-03-08 09:57:44,604 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/MaterialMenu.qml:26: TypeError: Cannot read property 'isEnabled' of undefined
2020-03-08 09:57:44,606 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/MaterialMenu.qml:28: TypeError: Cannot read property 'material' of undefined
2020-03-08 09:57:44,609 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-08 09:57:44,716 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-08 09:57:44,718 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-08 09:57:44,729 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-08 09:57:45,095 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device RedLeader already added
2020-03-08 09:57:45,145 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [741]: Set OctoPrint camera url to http://octolinux.local:8080/?action=stream
2020-03-08 09:57:45,167 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [135]: New error check scheduled.
2020-03-08 09:57:45,637 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-08 09:57:45,646 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [63]: Updating QualityProfilesDropDownMenuModel.
2020-03-08 09:57:46,117 - INFO - [MainThread] cura.Machines.MachineErrorChecker._setResult [187]: Error check finished, result = False, time = 0.9s
2020-03-08 09:57:47,159 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [225]: Starting to slice...
2020-03-08 09:57:47,159 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [243]: Going to slice build plate [0]!
2020-03-08 09:57:47,167 - DEBUG - [MainThread] UM.Backend.Backend._createSocket [213]: Previous socket existed. Closing that first.
2020-03-08 09:57:47,175 - WARNING - [Thread-2] UM.Decorators.deprecated_function [20]: <function GlobalStack.extruders at 0x600007dd1a88> is deprecated (since 4.4): Please use extruderList instead.
2020-03-08 09:57:47,189 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [173]: Socket state changed to Listening
2020-03-08 09:57:47,309 - INFO - [MainThread] UM.Backend.Backend.startEngine [81]: Started engine process: /Applications/Ultimaker Cura 3.app/Contents/MacOS/CuraEngine
2020-03-08 09:57:47,315 - DEBUG - [MainThread] UM.Backend.Backend._backendLog [101]: [Backend] Calling engine with: ['/Applications/Ultimaker Cura 3.app/Contents/MacOS/CuraEngine', 'connect', '127.0.0.1:49674', '']
2020-03-08 09:57:47,378 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-03-08 09:57:47,423 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [177]: Socket state changed to Connected
2020-03-08 09:57:47,424 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] Cura_SteamEngine version 4.5.0
2020-03-08 09:57:47,428 - DEBUG - [MainThread] UM.Backend.Backend._onSocketStateChanged [167]: Backend connected on port 49674
2020-03-08 09:57:47,477 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] Copyright (C) 2019 Ultimaker
2020-03-08 09:57:47,489 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-03-08 09:57:47,497 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] This program is free software: you can redistribute it and/or modify
2020-03-08 09:57:47,499 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] it under the terms of the GNU Affero General Public License as published by
2020-03-08 09:57:47,503 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] the Free Software Foundation, either version 3 of the License, or
2020-03-08 09:57:47,506 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] (at your option) any later version.
2020-03-08 09:57:47,509 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-03-08 09:57:47,512 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] This program is distributed in the hope that it will be useful,
2020-03-08 09:57:47,516 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] but WITHOUT ANY WARRANTY; without even the implied warranty of
2020-03-08 09:57:47,519 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
2020-03-08 09:57:47,524 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] GNU Affero General Public License for more details.
2020-03-08 09:57:47,527 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-03-08 09:57:47,531 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] You should have received a copy of the GNU Affero General Public License
2020-03-08 09:57:47,535 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] along with this program.  If not, see <http://www.gnu.org/licenses/>.
2020-03-08 09:57:47,647 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onStartSliceCompleted [429]: Sending slice message took 0.48775815963745117 seconds
2020-03-08 09:57:47,820 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING]  -s speed_prime_tower="60" -s print_bed_temperature="65" -s machine_steps_per_mm_z="50" -s wall_0_extruder_nr="-1" -s support_interface_skip_height="0.3" -s support_initial_layer_line_distance="2.6666666666666665" -s retract_at_layer_change="False" -s support_bottom_extruder_nr="0" -s minimum_support_area="0.0" -s bridge_wall_coast="100" -s material_bed_temp_wait="True" -s magic_spiralize="False" -s support_bottom_line_width="0.4" -s machine_minimum_feedrate="0.0" -s small_feature_speed_factor="50" -s cool_fan_speed="100.0" -s support_enable="False" -s command_line_settings="0" -s raft_base_line_width="0.8" -s support_skip_some_zags="False" -s speed_print="60" -s machine_depth="200" -s raft_surface_speed="30.0" -s support_roof_enable="True" -s alternate_extra_perimeter="False" -s skin_angles="[ ]" -s cool_min_speed="10" -s jerk_skirt_brim="20" -s raft_interface_acceleration="3000" -s support_skip_zag_per_mm="20" -s roofing_material_flow="100" -s machine_name="Wanhao Duplicator i3 Plus" -s wipe_pause="0" -s wipe_retraction_prime_speed="25" -s support_use_towers="True" -s support_mesh="False" -s support_roof_pattern="concentric" -s travel_avoid_other_parts="True" -s support_interface_material_flow="100" -s infill_overlap="10" -s machine_max_feedrate_z="299792458000" -s cool_fan_full_layer="2" -s support_bottom_line_distance="0.4" -s support_bottom_pattern="concentric" -s speed_topbottom="30.0" -s raft_smoothing="5" -s roofing_line_width="0.4" -s magic_mesh_surface_mode="normal" -s acceleration_prime_tower="3000" -s meshfix_maximum_deviation="0.05" -s speed_travel_layer_0="60.0" -s magic_fuzzy_skin_thickness="0.3" -s meshfix_extensive_stitching="False" -s raft_base_thickness="0.36" -s support_type="buildplate" -s skin_edge_support_layers="0" -s draft_shield_dist="10" -s skin_no_small_gaps_heuristic="False" -s jerk_wall_x="20" -s retraction_min_travel="0.8" -s support_roof_line_width="0.4" -s bottom_thickness="0.8" -s retraction_extra_prime_amount="0" -s material_print_temperature_layer_0="210" -s acceleration_support="3000" -s top_bottom_extruder_nr="-1" -s adhesion_z_offset="0" -s mold_roof_height="0.5" -s support_extruder_nr_layer_0="0" -s meshfix_maximum_travel_resolution="0.8" -s clean_between_layers="False" -s wireframe_top_jump="0.6" -s top_bottom_pattern_0="lines" -s support_conical_min_width="5.0" -s machine_disallowed_areas="[]" -s gantry_height="180" -s material_surface_energy="100" -s jerk_wall="20" -s top_bottom_thickness="0.8" -s brim_line_count="8" -s support_roof_line_distance="0.4" -s jerk_support_interface="20" -s cool_fan_speed_min="100.0" -s wipe_move_distance="20" -s minimum_roof_area="1.0" -s brim_replaces_support="True" -s speed_z_hop="10" -s bridge_skin_material_flow="60" -s bridge_skin_material_flow_2="100" -s infill_sparse_thickness="0.1" -s small_feature_speed_factor_0="50" -s raft_surface_line_width="0.4" -s infill_enable_travel_optimization="False" -s machine_heat_zone_length="16" -s material_end_of_filament_purge_speed="0.5" -s acceleration_support_infill="3000" -s brim_gap="0" -s layer_0_z_overlap="0.15" -s infill_material_flow="100" -s speed_support_roof="40.0" -s wireframe_drag_along="0.6" -s print_temperature="210" -s xy_offset_layer_0="0" -s support_interface_height="1" -s ironing_pattern="zigzag" -s raft_interface_thickness="0.15000000000000002" -s travel_compensate_overlapping_walls_enabled="True" -s support_line_width="0.4" -s ooze_shield_enabled="False" -s support_interface_offset="0.0" -s support_tree_enable="False" -s retraction_hop_after_extruder_switch_height="1" -s bridge_skin_density_2="75" -s speed_wall_x="60.0" -s adhesion_type="none" -s default_material_bed_temperature="60" -s machine_max_jerk_z="0.4" -s support_tree_angle="40" -s material_linear_advance_factor_support_interface="0" -s conical_overhang_enabled="False" -s support_pattern="lines" -s extruder_prime_pos_y="0" -s jerk_layer_0="20" -s travel_compensate_overlapping_walls_0_enabled="True" -s sub_div_rad_add="0.4" -s infill_multiplier="1" -s support_infill_rate="15" -s material_anti_ooze_retracted_position="-4" -s jerk_print_layer_0="20" -s wireframe_roof_inset="3" -s cool_fan_speed_0="0" -s support_brim_line_count="20" -s blackmagic="0" -s infill_support_enabled="False" -s raft_interface_speed="22.5" -s travel_avoid_distance="0.625" -s support_bottom_enable="False" -s dual="0" -s cross_infill_pocket_size="4.0" -s wall_line_width_0="0.4" -s support_top_distance="0.1" -s retraction_hop_after_extruder_switch="True" -s material_guid="" -s support_mesh_drop_down="True" -s ironing_line_spacing="0.1" -s mold_enabled="False" -s jerk_travel_layer_0="30.0" -s speed_slowdown_layers="2" -s default_material_print_temperature="210" -s roofing_layer_count="0" -s infill_mesh_order="0" -s support="0" -s spaghetti_infill_enabled="False" -s raft_fan_speed="0" -s machine_max_acceleration_y="9000" -s meshfix="0" -s acceleration_skirt_brim="3000" -s switch_extruder_extra_prime_amount="0" -s wireframe_flow="100" -s jerk_ironing="20" -s roofing_angles="[ ]" -s top_skin_expand_distance="0.8" -s acceleration_ironing="3000" -s prime_tower_flow="100" -s bridge_wall_material_flow="50" -s travel="0" -s switch_extruder_prime_speed="20" -s wall_x_extruder_nr="-1" -s cool_fan_speed_max="100.0" -s wall_overhang_angle="90" -s cool_fan_enabled="True" -s support_roof_height="1.2" -s material="0" -s infill_before_walls="True" -s material_bed_temp_prepend="True" -s wireframe_printspeed_bottom="5" -s skin_preshrink="0.8" -s wall_0_wipe_dist="0.2" -s material_linear_advance_factor_wall_0="0" -s bottom_skin_preshrink="0.8" -s support_xy_distance_overhang="0.2" -s machine_gcode_flavor="RepRap (Marlin/Sprinter)" -s wireframe_roof_fall_down="2" -s wireframe_strategy="compensate" -s machine_endstop_positive_direction_y="False" -s wireframe_top_delay="0" -s spaghetti_max_infill_angle="10" -s acceleration_support_interface="3000" -s speed_layer_0="30.0" -s time="09:57:47" -s machine_buildplate_type="glass" -s raft_base_jerk="20" -s machine_nozzle_id="unknown" -s wipe_brush_pos_x="100" -s acceleration_travel_layer_0="5000.0" -s speed_equalize_flow_max="150" -s bridge_skin_support_threshold="50" -s machine_max_jerk_e="5.0" -s raft_margin="15" -s wireframe_fall_down="0.5" -s support_offset="0" -s material_flow="100" -s cool_min_layer_time="5" -s material_linear_advance_factor="0" -s adhesion_z_offset_extensive_processing="False" -s meshfix_union_all="True" -s support_z_distance="0.1" -s material_linear_advance_factor_skirt_brim="0" -s layer_height_0="0.3" -s bridge_fan_speed_2="0" -s initial_bottom_layers="8" -s support_interface_pattern="concentric" -s bridge_skin_material_flow_3="110" -s bridge_wall_speed="15.0" -s support_bottom_offset="0.0" -s material_linear_advance_factor_infill="0" -s material_print_temp_prepend="True" -s wireframe_printspeed_down="5" -s support_bottom_material_flow="100" -s ironing_enabled="False" -s acceleration_travel="5000" -s acceleration_wall="3000" -s raft_base_acceleration="3000" -s wall_extruder_nr="-1" -s skin_overlap="5" -s print_sequence="all_at_once" -s material_linear_advance_factor_prime_tower="0" -s retraction_prime_speed="25" -s z_seam_type="sharpest_corner" -s spaghetti_inset="0.2" -s speed_support_bottom="40.0" -s material_extrusion_cool_down_speed="0.7" -s wipe_repeat_count="5" -s meshfix_maximum_resolution="0.5" -s gradual_support_infill_step_height="1" -s adhesion_extruder_nr="0" -s mold_width="5" -s jerk_support_infill="20" -s wall_overhang_speed_factor="100" -s raft_acceleration="3000" -s support_bottom_height="1" -s acceleration_support_roof="3000" -s support_roof_offset="0.0" -s speed_roofing="30.0" -s support_bottom_stair_step_height="0.3" -s brim_outside_only="True" -s material_standby_temperature="150" -s raft_surface_layers="2" -s skirt_brim_minimal_length="250" -s travel_compensate_overlapping_walls_x_enabled="True" -s wireframe_flow_connection="100" -s machine_nozzle_expansion_angle="45" -s adaptive_layer_height_enabled="False" -s spaghetti_infill_extra_volume="0" -s support_connect_zigzags="True" -s jerk_support_roof="20" -s machine_extruder_count="1" -s wireframe_flow_flat="100" -s speed_print_layer_0="30.0" -s raft_jerk="20" -s prime_tower_min_volume="6" -s material_bed_temperature="65" -s draft_shield_height="10" -s retraction_combing_max_distance="0" -s z_seam_x="100.0" -s infill_line_distance="4.0" -s minimum_bottom_area="1.0" -s xy_offset="0" -s extruders_enabled_count="1" -s machine_end_gcode="" -s machine_center_is_zero="False" -s jerk_print="20" -s magic_fuzzy_skin_point_dist="0.8" -s bridge_skin_speed_3="15.0" -s spaghetti_flow="20" -s filter_out_tiny_gaps="True" -s skin_outline_count="1" -s jerk_prime_tower="20" -s wireframe_nozzle_clearance="1" -s speed_infill="60" -s material_linear_advance_factor_topbottom="0" -s wireframe_enabled="False" -s skirt_line_count="4" -s retraction_count_max="90" -s gradual_support_infill_steps="0" -s connect_infill_polygons="False" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s connect_skin_polygons="False" -s infill_pattern="grid" -s infill_wipe_dist="0.1" -s bottom_skin_expand_distance="0.8" -s retraction_hop="1" -s jerk_wall_0="20" -s support_roof_extruder_nr="0" -s acceleration_enabled="False" -s machine_show_variants="False" -s gradual_infill_steps="0" -s jerk_infill="20" -s wall_0_inset="0" -s relative_extrusion="False" -s wipe_retraction_amount="6.5" -s material_break_temperature="50" -s machine_steps_per_mm_y="50" -s wireframe_printspeed="5" -s support_tree_branch_diameter="2" -s wipe_hop_amount="1" -s support_join_distance="2.0" -s speed_equalize_flow_enabled="False" -s wall_line_width="0.4" -s skin_material_flow="100" -s support_bottom_density="100" -s flow_rate_extrusion_offset_factor="100" -s carve_multiple_volumes="False" -s acceleration_wall_x="3000" -s acceleration_roofing="3000" -s retraction_hop_enabled="False" -s switch_extruder_retraction_speed="20" -s top_skin_preshrink="0.8" -s initial_layer_line_width_factor="100.0" -s machine_start_gcode="" -s material_diameter="2.85" -s flow_rate_max_extrusion_offset="0" -s platform_adhesion="0" -s support_bottom_stair_step_width="5.0" -s machine_acceleration="4000" -s cool_min_layer_time_fan_speed_max="10" -s prime_blob_enable="False" -s meshfix_keep_open_polygons="False" -s machine_extruders_share_heater="False" -s speed_wall_0="30.0" -s cool_lift_head="False" -s material_break_speed="25" -s machine_max_acceleration_z="100" -s support_wall_count="0" -s skin_edge_support_thickness="0" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s wall_min_flow_retract="False" -s minimum_polygon_circumference="1.0" -s wipe_hop_speed="10" -s date="08-03-2020" -s speed_support="60" -s ironing_inset="0.2" -s wireframe_roof_outer_delay="0.2" -s bridge_fan_speed_3="0" -s z_seam_y="200" -s support_interface_enable="False" -s bridge_skin_density_3="80" -s shell="0" -s support_infill_angles="[ ]" -s infill_extruder_nr="-1" -s infill_sparse_density="20" -s wall_thickness="0.8" -s material_crystallinity="False" -s machine_steps_per_mm_e="1600" -s support_bottom_distance="0" -s prime_tower_line_width="0.4" -s spaghetti_infill_stepped="True" -s machine_max_feedrate_e="299792458000" -s infill_line_width="0.4" -s magic_fuzzy_skin_outside_only="False" -s jerk_support_bottom="20" -s material_print_temp_wait="True" -s support_roof_angles="[ ]" -s support_interface_angles="[ ]" -s small_feature_max_length="0.0" -s skin_overlap_mm="0.02" -s material_flush_purge_length="60" -s raft_interface_line_spacing="1.0" -s machine_nozzle_heat_up_speed="2.0" -s adaptive_layer_height_threshold="0.2" -s top_thickness="0.8" -s bridge_skin_density="100" -s wall_min_flow="0" -s ironing_flow="10.0" -s support_tree_collision_resolution="0.2" -s raft_base_fan_speed="0" -s bridge_settings_enabled="False" -s support_roof_material_flow="100" -s machine_max_feedrate_y="299792458000" -s alternate_carve_order="True" -s wipe_retraction_enable="True" -s day="Sun" -s support_tree_branch_diameter_angle="5" -s experimental="0" -s prime_tower_position_x="197.975" -s bridge_wall_min_length="5" -s machine_steps_per_mm_x="50" -s jerk_topbottom="20" -s remove_empty_first_layers="True" -s prime_tower_size="20" -s jerk_roofing="20" -s travel_speed="120" -s speed="0" -s cutting_mesh="False" -s machine_max_jerk_xy="20.0" -s material_adhesion_tendency="10" -s extruder_prime_pos_abs="False" -s nozzle_disallowed_areas="[]" -s support_interface_extruder_nr="0" -s support_tower_maximum_supported_diameter="3.0" -s wipe_retraction_extra_prime_amount="0" -s material_break_preparation_retracted_position="-16" -s infill_mesh="False" -s layer_height="0.1" -s support_brim_width="8.0" -s machine_nozzle_head_distance="3" -s prime_tower_brim_enable="False" -s gradual_infill_step_height="1.5" -s outer_inset_first="False" -s support_tower_roof_angle="65" -s extruder_prime_pos_z="0" -s skirt_gap="3" -s machine_width="200" -s machine_max_feedrate_x="299792458000" -s anti_overhang_mesh="False" -s travel_retract_before_outer_wall="False" -s machine_height="180" -s retraction_extrusion_window="6.5" -s support_fan_enable="False" -s coasting_enable="False" -s support_interface_density="100" -s support_material_flow="100" -s bridge_fan_speed="100" -s support_infill_extruder_nr="0" -s infill="0" -s coasting_speed="90" -s jerk_travel="30" -s ooze_shield_angle="60" -s machine_endstop_positive_direction_x="False" -s material_final_print_temperature="195" -s acceleration_print="3000" -s material_linear_advance_factor_wall_x="0" -s speed_support_infill="60" -s max_extrusion_before_wipe="10" -s raft_base_line_spacing="1.6" -s retraction_enable="True" -s support_line_distance="2.6666666666666665" -s material_print_temperature="210" -s mold_angle="40" -s raft_speed="30.0" -s retraction_amount="6.5" -s wipe_retraction_speed="25" -s support_tower_diameter="3.0" -s material_break_retracted_position="-50" -s material_initial_print_temperature="200" -s resolution="0" -s wireframe_printspeed_up="5" -s support_infill_sparse_thickness="0.1" -s material_bed_temperature_layer_0="65" -s adaptive_layer_height_variation="0.1" -s cross_infill_density_image="" -s skirt_brim_speed="30.0" -s machine_nozzle_temp_enabled="True" -s material_maximum_park_duration="300" -s switch_extruder_retraction_amount="16" -s wall_line_width_x="0.4" -s jerk_support="20" -s bridge_skin_speed_2="15.0" -s raft_surface_fan_speed="0" -s max_skin_angle_for_expansion="90" -s raft_interface_line_width="0.8" -s infill_offset_x="0" -s magic_fuzzy_skin_enabled="False" -s jerk_enabled="False" -s support_zag_skip_count="8" -s machine_filament_park_distance="16" -s fill_outline_gaps="False" -s z_seam_position="back" -s infill_randomize_start_location="False" -s mesh_position_y="0" -s machine_max_acceleration_x="9000" -s speed_support_interface="40.0" -s magic_fuzzy_skin_point_density="1.25" -s wall_line_count="2" -s wipe_retraction_retract_speed="25" -s multiple_mesh_overlap="0.15" -s z_seam_corner="z_seam_corner_inner" -s machine_head_with_fans_polygon="[[-20, 10], [10, 10], [10, -10], [-20, -10]]" -s wall_material_flow="100" -s material_flow_layer_0="100" -s retraction_combing="all" -s travel_avoid_supports="False" -s acceleration_infill="3000" -s machine_nozzle_size="0.4" -s raft_interface_jerk="20" -s material_shrinkage_percentage="0" -s material_break_preparation_temperature="210" -s bridge_skin_speed="15.0" -s skirt_brim_material_flow="100" -s retraction_speed="25" -s wall_0_material_flow="100" -s material_no_load_move_factor="0.940860215" -s raft_surface_line_spacing="0.4" -s material_anti_ooze_retraction_speed="5" -s support_conical_enabled="False" -s cross_support_density_image="" -s z_seam_relative="False" -s wireframe_height="3" -s smooth_spiralized_contours="True" -s wireframe_straight_before_down="20" -s infill_angles="[ ]" -s minimum_interface_area="1.0" -s draft_shield_enabled="False" -s machine_nozzle_cool_down_speed="2.0" -s speed_ironing="20.0" -s machine_max_acceleration_e="10000" -s limit_support_retractions="True" -s material_linear_advance_factor_support="0" -s support_tree_branch_distance="1" -s wall_x_material_flow="100" -s min_skin_width_for_expansion="4.898587196589413e-17" -s prime_tower_position_y="177.975" -s mesh_position_x="0" -s expand_skins_expand_distance="0.8" -s roofing_pattern="lines" -s small_hole_max_size="0" -s acceleration_wall_0="3000" -s support_interface_line_width="0.4" -s support_bottom_angles="[ ]" -s infill_wall_line_count="0" -s support_supported_skin_fan_speed="100" -s draft_shield_height_limitation="full" -s wireframe_printspeed_flat="5" -s skin_line_width="0.4" -s machine_firmware_retract="False" -s switch_extruder_retraction_speeds="20" -s top_layers="8" -s initial_extruder_nr="0" -s meshfix_union_all_remove_holes="False" -s support_brim_enable="False" -s cool_fan_full_at_height="0.3" -s machine_heated_build_volume="False" -s support_conical_angle="30" -s brim_width="8.0" -s raft_interface_fan_speed="0" -s fill_perimeter_gaps="everywhere" -s prime_tower_wipe_enabled="True" -s spaghetti_max_height="2.0" -s support_roof_density="100" -s acceleration_topbottom="3000" -s machine_settings="0" -s ironing_only_highest_layer="False" -s wireframe_flat_delay="0.1" -s bridge_sparse_infill_max_density="0" -s wireframe_bottom_delay="0" -s line_width="0.4" -s optimize_wall_printing_order="False" -s zig_zaggify_support="False" -s wipe_hop_enable="False" -s acceleration_print_layer_0="3000" -s speed_travel="120" -s support_angle="70" -s raft_base_speed="22.5" -s machine_shape="rectangular" -s machine_heated_bed="True" -s machine_use_extruder_offset_to_offset_coords="True" -s wireframe_roof_drag_along="0.8" -s acceleration_support_bottom="3000" -s material_end_of_filament_purge_length="20" -s material_break_preparation_speed="2" -s acceleration_layer_0="3000" -s support_xy_overrides_z="z_overrides_xy" -s min_infill_area="0" -s machine_nozzle_tip_outer_diameter="1" -s cooling="0" -s raft_airgap="0.3" -s material_flush_purge_speed="0.5" -s slicing_tolerance="middle" -s retraction_retract_speed="25" -s layer_start_y="0.0" -s build_volume_temperature="28" -s extruder_prime_pos_x="0" -s infill_overlap_mm="0.04" -s mesh_position_z="0" -s conical_overhang_angle="50" -s zig_zaggify_infill="False" -s raft_surface_acceleration="3000" -s wireframe_up_half_speed="0.3" -s bridge_enable_more_layers="True" -s raft_surface_thickness="0.1" -s prime_tower_enable="False" -s material_linear_advance_factor_wall="0" -s coasting_min_volume="0.8" -s support_xy_distance="0.7" -s speed_wall="30.0" -s infill_support_angle="40" -s adaptive_layer_height_variation_step="0.01" -s raft_surface_jerk="20" -s layer_start_x="0.0" -s machine_min_cool_heat_time_window="50.0" -s ooze_shield_dist="2" -s material_flow_dependent_temperature="False" -s bottom_layers="8" -s infill_offset_y="0" -s machine_feeder_wheel_diameter="10.0" -s retraction_hop_only_when_collides="False" -s roofing_extruder_nr="-1" -s skirt_brim_line_width="0.4" -s center_object="False" -s top_bottom_pattern="lines" -s support_extruder_nr="0" -s coasting_volume="0.064" -s machine_endstop_positive_direction_z="True" -e0 -s speed_prime_tower="60" -s machine_steps_per_mm_z="50" -s jerk_support_roof="20" -s support_interface_skip_height="0.3" -s support_interface_offset="0.0" -s support_initial_layer_line_distance="2.6666666666666665" -s retract_at_layer_change="False" -s minimum_support_area="0.0" -s bridge_wall_coast="100" -s support_bottom_line_width="0.4" -s machine_nozzle_offset_x="0" -s small_feature_speed_factor="50" -s switch_extruder_prime_speed="20" -s cool_fan_speed="80" -s command_line_settings="0" -s experimental="0" -s raft_base_line_width="0.8" -s support_skip_some_zags="False" -s machine_nozzle_offset_y="0" -s speed_print="60" -s raft_surface_speed="30.0" -s support_roof_enable="True" -s alternate_extra_perimeter="False" -s skin_angles="[ ]" -s cool_min_speed="10" -s machine_extruder_end_pos_x="0" -s jerk_skirt_brim="20" -s raft_interface_acceleration="3000" -s material_break_preparation_retracted_position="-16" -s support_skip_zag_per_mm="20" -s roofing_material_flow="100" -s skin_overlap="5" -s wipe_pause="0" -s wipe_retraction_prime_speed="35" -s support_use_towers="True" -s support_roof_pattern="concentric" -s travel_avoid_other_parts="True" -s cool_fan_full_layer="2" -s support_bottom_line_distance="0.4" -s material_linear_advance_factor_topbottom="0" -s support_bottom_pattern="concentric" -s speed_topbottom="30.0" -s raft_smoothing="5" -s roofing_line_width="0.4" -s magic_mesh_surface_mode="normal" -s acceleration_prime_tower="3000" -s meshfix_maximum_deviation="0.05" -s speed_travel_layer_0="30.0" -s skin_edge_support_layers="0" -s skin_no_small_gaps_heuristic="False" -s wipe_hop_enable="False" -s zig_zaggify_support="False" -s bridge_fan_speed="100" -s support_material_flow="100" -s retraction_extra_prime_amount="0" -s support_supported_skin_fan_speed="100" -s infill_wall_line_count="0" -s acceleration_support_interface="3000" -s spaghetti_max_infill_angle="10" -s resolution="0" -s support_interface_pattern="concentric" -s bridge_skin_material_flow_3="110" -s initial_bottom_layers="6" -s bridge_fan_speed_2="0" -s mold_roof_height="0.5" -s meshfix_maximum_travel_resolution="0.8" -s extruder_prime_pos_x="0" -s layer_start_y="0.0" -s top_bottom_pattern_0="lines" -s support_conical_min_width="5.0" -s cool_fan_speed_min="80" -s wipe_move_distance="20" -s brim_replaces_support="True" -s extruder_prime_pos_z="0" -s support_tower_roof_angle="65" -s speed_z_hop="10" -s skirt_brim_speed="12" -s switch_extruder_retraction_amount="16" -s material_maximum_park_duration="300" -s machine_nozzle_temp_enabled="True" -s top_bottom_thickness="0.8" -s raft_base_speed="22.5" -s support_angle="70" -s machine_steps_per_mm_e="1600" -s material_crystallinity="False" -s support_bottom_distance="0" -s wall_thickness="0.8" -s material_flush_purge_length="60" -s machine_nozzle_heat_up_speed="2.0" -s raft_interface_line_spacing="1.0" -s support_bottom_material_flow="100" -s acceleration_travel="5000" -s acceleration_wall="3000" -s ironing_enabled="False" -s raft_surface_line_width="0.4" -s acceleration_support_infill="3000" -s brim_gap="0" -s support_line_width="0.4" -s jerk_prime_tower="20" -s skin_outline_count="1" -s support_interface_height="1" -s support_conical_enabled="False" -s material_anti_ooze_retraction_speed="5" -s z_seam_corner="z_seam_corner_inner" -s wipe_retraction_speed="35" -s retraction_amount="3" -s raft_interface_thickness="0.15000000000000002" -s jerk_wall_0="20" -s retraction_hop="1" -s infill_sparse_thickness="0.1" -s extruder_prime_pos_abs="False" -s material_adhesion_tendency="0" -s support_tree_angle="40" -s conical_overhang_enabled="False" -s extruder_prime_pos_y="0" -s travel_compensate_overlapping_walls_0_enabled="True" -s infill_multiplier="1" -s support_infill_rate="15" -s jerk_wall_x="20" -s cool_fan_speed_0="0" -s support_brim_line_count="20" -s blackmagic="0" -s infill_support_enabled="False" -s raft_interface_speed="22.5" -s travel_avoid_distance="0.625" -s support_bottom_enable="False" -s dual="0" -s cross_infill_pocket_size="1.25" -s wall_line_width_0="0.4" -s support_top_distance="0.1" -s retraction_hop_after_extruder_switch="True" -s support_bottom_offset="0.0" -s bridge_wall_speed="15.0" -s meshfix_union_all="True" -s support_z_distance="0.1" -s material_guid="0ff92885-617b-4144-a03c-9989872454bc" -s ironing_line_spacing="0.1" -s mold_enabled="False" -s jerk_travel_layer_0="30.0" -s support_connect_zigzags="True" -s spaghetti_infill_extra_volume="0" -s spaghetti_flow="20" -s magic_fuzzy_skin_point_dist="0.8" -s filter_out_tiny_gaps="True" -s bridge_skin_speed_3="15.0" -s default_material_print_temperature="200" -s roofing_layer_count="0" -s mold_angle="40" -s raft_speed="30.0" -s raft_fan_speed="0" -s material_anti_ooze_retracted_position="-4" -s jerk_print_layer_0="20" -s meshfix="0" -s acceleration_skirt_brim="3000" -s jerk_layer_0="20" -s switch_extruder_extra_prime_amount="0" -s jerk_ironing="20" -s roofing_angles="[ ]" -s top_skin_expand_distance="1.6" -s acceleration_ironing="3000" -s prime_tower_flow="100" -s support_tree_branch_diameter="2" -s machine_steps_per_mm_y="50" -s bridge_wall_material_flow="50" -s wall_min_flow_retract="False" -s connect_infill_polygons="False" -s machine_extruder_start_code="" -s travel="0" -s xy_offset_layer_0="0" -s cool_fan_speed_max="80" -s wall_overhang_angle="90" -s cool_fan_enabled="True" -s support_infill_sparse_thickness="0.1" -s support_roof_height="1.2" -s clean_between_layers="False" -s skin_preshrink="1.6" -s raft_surface_acceleration="3000" -s wall_0_wipe_dist="0.2" -s material_linear_advance_factor_wall_0="0" -s sub_div_rad_add="0.4" -s bottom_skin_preshrink="1.6" -s support_xy_distance_overhang="0.2" -s infill_enable_travel_optimization="False" -s speed_layer_0="12" -s speed_wall_x="60.0" -s raft_base_jerk="20" -s magic_fuzzy_skin_enabled="False" -s prime_tower_min_volume="6" -s machine_nozzle_id="unknown" -s wipe_brush_pos_x="100" -s acceleration_travel_layer_0="5000.0" -s speed_equalize_flow_max="150" -s bridge_skin_support_threshold="50" -s material_end_of_filament_purge_speed="0.5" -s raft_margin="15" -s support_offset="0" -s material_flow="100" -s material_linear_advance_factor_wall_x="0" -s acceleration_print="3000" -s multiple_mesh_overlap="0.15" -s wipe_retraction_retract_speed="35" -s cool_min_layer_time="5" -s material_linear_advance_factor="0" -s machine_extruder_start_pos_abs="False" -s acceleration_support="3000" -s support="0" -s spaghetti_infill_enabled="False" -s retraction_hop_after_extruder_switch_height="1" -s machine_extruder_end_pos_abs="False" -s material_linear_advance_factor_infill="0" -s minimum_roof_area="1.0" -s machine_extruder_cooling_fan_number="0" -s speed_support_bottom="40.0" -s material_extrusion_cool_down_speed="0.7" -s wipe_repeat_count="5" -s meshfix_maximum_resolution="0.5" -s gradual_support_infill_step_height="1" -s raft_acceleration="3000" -s support_bottom_height="1" -s acceleration_support_roof="3000" -s support_roof_offset="0.0" -s wall_material_flow="100" -s material_flow_layer_0="100" -s meshfix_union_all_remove_holes="False" -s skin_edge_support_thickness="0" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s support_wall_count="0" -s material_diameter="1.75" -s travel_compensate_overlapping_walls_x_enabled="True" -s speed_print_layer_0="12" -s raft_jerk="20" -s xy_offset="0" -s speed_infill="60" -s cool_lift_head="False" -s speed_wall_0="30.0" -s outer_inset_first="False" -s gradual_infill_step_height="1.5" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s support_join_distance="2.0" -s wipe_hop_amount="1" -s wipe_retraction_enable="True" -s infill_wipe_dist="0.1" -s connect_skin_polygons="False" -s infill_pattern="gyroid" -s line_width="0.4" -s optimize_wall_printing_order="False" -s wipe_retraction_amount="3" -s material_break_temperature="50" -s top_skin_preshrink="1.6" -s acceleration_roofing="3000" -s retraction_hop_enabled="False" -s switch_extruder_retraction_speed="20" -s support_bottom_stair_step_width="5.0" -s platform_adhesion="0" -s machine_steps_per_mm_x="50" -s z_seam_x="100.0" -s retraction_combing_max_distance="0" -s speed_equalize_flow_enabled="False" -s wall_line_width="0.4" -s skin_material_flow="100" -s support_bottom_density="100" -s acceleration_wall_x="3000" -s machine_nozzle_cool_down_speed="2.0" -s skirt_brim_material_flow="100" -s bridge_skin_speed="15.0" -s cool_min_layer_time_fan_speed_max="10" -s prime_blob_enable="False" -s meshfix_keep_open_polygons="False" -s support_tower_maximum_supported_diameter="3.0" -s material_break_speed="25" -s speed_support="60" -s ironing_inset="0.2" -s bridge_fan_speed_3="0" -s jerk_print="20" -s bottom_skin_expand_distance="1.6" -s z_seam_y="200" -s speed_support_roof="40.0" -s support_bottom_angles="[ ]" -s support_interface_line_width="0.4" -s support_interface_enable="False" -s bridge_skin_density_3="80" -s shell="0" -s support_infill_angles="[ ]" -s gradual_support_infill_steps="0" -s infill_sparse_density="32" -s jerk_support_interface="20" -s skirt_brim_minimal_length="250" -s raft_surface_layers="2" -s brim_line_count="8" -s support_roof_line_distance="0.4" -s prime_tower_line_width="0.4" -s infill_line_width="0.4" -s magic_fuzzy_skin_outside_only="False" -s roofing_pattern="lines" -s support_interface_material_flow="100" -s infill_overlap="15" -s extruder_nr="0" -s jerk_support_bottom="20" -s support_roof_angles="[ ]" -s bottom_thickness="0.8" -s support_interface_angles="[ ]" -s small_feature_max_length="0.0" -s skin_overlap_mm="0.02" -s retraction_retract_speed="35" -s zig_zaggify_infill="False" -s infill_overlap_mm="0.06" -s mesh_position_z="0" -s conical_overhang_angle="50" -s bridge_skin_density="100" -s wall_min_flow="0" -s ironing_flow="10.0" -s support_tree_branch_diameter_angle="5" -s jerk_roofing="20" -s speed="0" -s wipe_retraction_extra_prime_amount="0" -s skirt_line_count="4" -s retraction_count_max="90" -s support_xy_overrides_z="z_overrides_xy" -s machine_nozzle_tip_outer_diameter="1" -s min_infill_area="0" -s magic_fuzzy_skin_thickness="0.3" -s meshfix_extensive_stitching="False" -s material_flow_dependent_temperature="False" -s bottom_layers="6" -s infill_offset_y="0" -s support_brim_width="8.0" -s machine_nozzle_head_distance="3" -s cross_support_density_image="" -s z_seam_relative="False" -s slicing_tolerance="exclusive" -s machine_extruder_end_pos_y="0" -s skirt_gap="3" -s infill_material_flow="100" -s material_break_preparation_temperature="217" -s jerk_travel="30" -s material_linear_advance_factor_skirt_brim="0" -s machine_endstop_positive_direction_x="False" -s material_final_print_temperature="202" -s wall_line_count="4" -s magic_fuzzy_skin_point_density="1.25" -s infill_randomize_start_location="False" -s mesh_position_y="0" -s bridge_skin_material_flow_2="100" -s speed_support_interface="40.0" -s bridge_skin_density_2="75" -s machine_extruder_start_pos_x="0" -s support_tower_diameter="3.0" -s machine_min_cool_heat_time_window="50.0" -s layer_start_x="0.0" -s wall_line_width_x="0.4" -s jerk_support="20" -s bridge_skin_speed_2="15.0" -s top_thickness="0.8" -s material="0" -s infill_before_walls="True" -s small_hole_max_size="0" -s acceleration_wall_0="3000" -s max_skin_angle_for_expansion="90" -s material_surface_energy="100" -s raft_interface_line_width="0.8" -s infill_offset_x="0" -s support_zag_skip_count="8" -s machine_filament_park_distance="16" -s fill_outline_gaps="False" -s cross_infill_density_image="" -s raft_surface_fan_speed="0" -s spaghetti_infill_stepped="True" -s machine_endstop_positive_direction_y="False" -s minimum_bottom_area="1.0" -s infill_line_distance="1.25" -s z_seam_position="back" -s top_layers="6" -s material_linear_advance_factor_prime_tower="0" -s retraction_prime_speed="35" -s z_seam_type="random" -s material_no_load_move_factor="0.940860215" -s raft_surface_line_spacing="0.4" -s infill="0" -s coasting_speed="90" -s support_roof_material_flow="100" -s travel_avoid_supports="False" -s acceleration_infill="3000" -s machine_nozzle_size="0.4" -s raft_interface_jerk="20" -s material_shrinkage_percentage="0" -s retraction_speed="35" -s wall_0_material_flow="100" -s support_tree_branch_distance="1" -s wall_x_material_flow="100" -s min_skin_width_for_expansion="3.67394039744206e-17" -s mesh_position_x="0" -s expand_skins_expand_distance="1.6" -s material_linear_advance_factor_support="0" -s speed_ironing="20.0" -s limit_support_retractions="True" -s support_roof_line_width="0.4" -s jerk_wall="20" -s raft_base_acceleration="3000" -s retraction_extrusion_window="3" -s machine_extruder_start_pos_y="0" -s support_fan_enable="False" -s small_feature_speed_factor_0="50" -s coasting_volume="0.064" -s machine_endstop_positive_direction_z="True" -s skirt_brim_line_width="0.4" -s center_object="False" -s top_bottom_pattern="lines" -s mold_width="5" -s jerk_support_infill="20" -s wall_overhang_speed_factor="100" -s infill_support_angle="40" -s raft_surface_jerk="20" -s bridge_sparse_infill_max_density="0" -s speed_roofing="30.0" -s support_bottom_stair_step_height="0.3" -s brim_outside_only="True" -s material_standby_temperature="175" -s support_xy_distance="0.7" -s speed_wall="30.0" -s travel_compensate_overlapping_walls_enabled="True" -s acceleration_topbottom="3000" -s machine_settings="0" -s ironing_only_highest_layer="False" -s support_brim_enable="False" -s cool_fan_full_at_height="0.3" -s support_conical_angle="30" -s wall_0_inset="0" -s speed_support_infill="60" -s raft_base_line_spacing="1.6" -s max_extrusion_before_wipe="10" -s brim_width="8.0" -s layer_0_z_overlap="0.15" -s ironing_pattern="zigzag" -s speed_travel="150" -s jerk_topbottom="20" -s raft_interface_fan_speed="0" -s fill_perimeter_gaps="everywhere" -s prime_tower_wipe_enabled="True" -s spaghetti_max_height="2.0" -s support_roof_density="100" -s acceleration_print_layer_0="3000" -s acceleration_support_bottom="3000" -s material_end_of_filament_purge_length="20" -s material_break_preparation_speed="2" -s retraction_min_travel="0.8" -s acceleration_layer_0="3000" -s support_pattern="lines" -s support_line_distance="2.6666666666666665" -s retraction_enable="True" -s support_interface_density="100" -s coasting_enable="False" -s machine_feeder_wheel_diameter="10.0" -s retraction_hop_only_when_collides="False" -s material_break_retracted_position="-50" -s material_initial_print_temperature="207" -s material_print_temperature_layer_0="217" -s support_tree_collision_resolution="0.2" -s raft_base_fan_speed="0" -s machine_heat_zone_length="16" -s gradual_infill_steps="0" -s raft_airgap="0.3" -s material_flush_purge_speed="0.5" -s infill_angles="[ ]" -s minimum_interface_area="1.0" -s machine_extruder_end_code="" -s skin_line_width="0.4" -s raft_surface_thickness="0.1" -s material_linear_advance_factor_wall="0" -s coasting_min_volume="0.8" -s initial_layer_line_width_factor="100.0" -s bridge_enable_more_layers="True" -s jerk_infill="20" -s switch_extruder_retraction_speeds="20" -s spaghetti_inset="0.2" -s material_linear_advance_factor_support_interface="0" -s bridge_skin_material_flow="60" -s material_print_temperature="217" -s wipe_hop_speed="10" -s cooling="0" -s raft_base_thickness="0.36" -g -e0 -l "0" -s extruder_nr="0"
2020-03-08 09:57:54,270 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-03-08 09:57:54,647 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 217 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-08 09:57:54,875 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-08 09:57:54,879 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-08 09:57:54,896 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [663]: Slicing took 7.736891031265259 seconds
2020-03-08 09:57:54,897 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [664]: Number of models per buildplate: {0: 1}
2020-03-08 09:57:54,897 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [678]: See if there is more to slice...
2020-03-08 09:57:55,114 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [181]: Socket state changed to Closing
2020-03-08 09:57:55,118 - DEBUG - [MainThread] UM.Backend.Backend._onSocketError [203]: Socket debug: Arcus Error (13): Closing socket because other side requested close.
2020-03-08 09:57:55,121 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [183]: Socket state changed to Closed
2020-03-08 09:57:55,121 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onBackendQuit [829]: Backend quit with return code 0. Resetting process and socket.
2020-03-08 09:57:56,470 - DEBUG - [MainThread] LinearAdvanceSettingPlugin.LinearAdvanceSettingPlugin._filterGcode [109]: No used extruders specify a linear advance factor
2020-03-08 09:57:56,744 - DEBUG - [MainThread] UM.Controller.setActiveStage [149]: Setting active stage to MonitorStage
2020-03-08 09:57:56,868 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:211: Error: Cannot assign [undefined] to QString
2020-03-08 09:57:56,916 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._processRequest [308]: Request [dc696d085cbb470185912a5017e4ec94] started
2020-03-08 09:57:56,920 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-08 09:57:57,409 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestFinished [369]: Request [dc696d085cbb470185912a5017e4ec94] finished.
2020-03-08 09:57:57,411 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-08 09:57:57,412 - INFO - [MainThread] SliceInfoPlugin.SliceInfo._onRequestFinished [275]: SliceInfo sent successfully
2020-03-08 09:57:58,700 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-03-08 09:58:00,837 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [772]: Resource created on OctoPrint instance: http://192.168.2.171:5000/api/files/local/WDI3P_motor_holder_1p0.gcode
2020-03-08 09:58:06,274 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-03-08 09:58:12,153 - INFO - [MainThread] cura.UI.MachineActionManager.addDefaultMachineActions [56]: Default machine actions have been added for machine definition [monoprice_select_mini_v2], do nothing.
2020-03-08 09:58:12,160 - WARNING - [MainThread] cura.Settings.GlobalStack.addExtruder [179]: Extruder [monoprice_select_mini_v2_extruder_0 #2] has already been added to this stack [Monoprice Select Mini V2 (E3D)]
2020-03-08 09:58:12,162 - WARNING - [MainThread] cura.Settings.ExtruderManager.registerExtruder [156]: Extruder [monoprice_select_mini_v2_extruder_0 #2] has already been registered on machine [Monoprice Select Mini V2 (E3D)], not doing anything
2020-03-08 09:58:12,166 - INFO - [MainThread] UM.Logger.info [112]: Initializing Active Machine...
2020-03-08 09:58:12,325 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-08 09:58:12,357 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:211: Error: Cannot assign [undefined] to QString
2020-03-08 09:58:12,362 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device R2D2 already added
2020-03-08 09:58:12,363 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [303]: Connection with instance R2D2 with url http://192.168.2.171:5001/ started
2020-03-08 09:58:12,378 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/SettingsMenu.qml:51: TypeError: Cannot read property 'isEnabled' of undefined
2020-03-08 09:58:12,380 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/SettingsMenu.qml:44: TypeError: Cannot read property 'isEnabled' of undefined
2020-03-08 09:58:12,383 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/MaterialMenu.qml:26: TypeError: Cannot read property 'isEnabled' of undefined
2020-03-08 09:58:12,386 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/MaterialMenu.qml:28: TypeError: Cannot read property 'material' of undefined
2020-03-08 09:58:12,389 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-08 09:58:12,444 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-08 09:58:12,456 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-08 09:58:12,465 - INFO - [Thread-3] STLReader.STLReader.load_file [51]: Using NumPy-STL to load STL data.
2020-03-08 09:58:12,470 - DEBUG - [Thread-3] UM.Mesh.MeshData.calculateNormalsFromVertices [495]: Calculating normals took 0.0002989768981933594 seconds
2020-03-08 09:58:12,471 - DEBUG - [Thread-3] STLReader.STLReader._read [102]: Loaded a mesh with 1746 vertices
2020-03-08 09:58:12,503 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device R2D2 already added
2020-03-08 09:58:12,505 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device R2D2 already added
2020-03-08 09:58:12,514 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [741]: Set OctoPrint camera url to http://octolinux.local:8080/?action=stream
2020-03-08 09:58:12,549 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [135]: New error check scheduled.
2020-03-08 09:58:12,974 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-08 09:58:12,977 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [63]: Updating QualityProfilesDropDownMenuModel.
2020-03-08 09:58:13,506 - INFO - [MainThread] cura.Machines.MachineErrorChecker._setResult [187]: Error check finished, result = False, time = 1.0s
2020-03-08 09:58:13,744 - DEBUG - [MainThread] UM.Controller.setActiveStage [149]: Setting active stage to PrepareStage
2020-03-08 09:58:13,773 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-08 09:58:13,820 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-08 09:58:13,823 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-08 09:58:13,826 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/plugins/plugins/PrepareStage/PrepareMain.qml:16:5: QML ActionPanelWidget: Binding loop detected for property "width"
2020-03-08 09:58:13,837 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:79: ReferenceError: stop is not defined
2020-03-08 09:58:13,840 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:63: TypeError: Cannot read property of null
2020-03-08 09:58:13,843 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:91: TypeError: Cannot read property of null
2020-03-08 09:58:13,845 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:102: TypeError: Cannot read property of null
2020-03-08 09:58:13,848 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:103: TypeError: Cannot read property of null
2020-03-08 09:58:13,850 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:139: TypeError: Cannot read property of null
2020-03-08 09:58:13,852 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:140: TypeError: Cannot read property of null
2020-03-08 09:58:13,855 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:120: TypeError: Cannot read property of null
2020-03-08 09:58:13,857 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:122: TypeError: Cannot read property of null
2020-03-08 09:58:13,859 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-03-08 09:58:13,861 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:36: TypeError: Cannot read property of null
2020-03-08 09:58:13,863 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:37: TypeError: Cannot read property of null
2020-03-08 09:58:13,866 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:49: TypeError: Cannot read property of null
2020-03-08 09:58:13,868 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:59: TypeError: Cannot read property of null
2020-03-08 09:58:13,870 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:61: TypeError: Cannot read property of null
2020-03-08 09:58:13,872 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:63: TypeError: Cannot read property of null
2020-03-08 09:58:13,874 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ExtruderBox.qml:20: TypeError: Cannot read property of null
2020-03-08 09:58:13,876 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:29: TypeError: Cannot read property of null
2020-03-08 09:58:13,878 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:30: TypeError: Cannot read property of null
2020-03-08 09:58:13,881 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:40: TypeError: Cannot read property of null
2020-03-08 09:58:13,883 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:73: TypeError: Cannot read property of null
2020-03-08 09:58:13,885 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:135: TypeError: Cannot read property of null
2020-03-08 09:58:13,887 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:246: TypeError: Cannot read property of null
2020-03-08 09:58:13,889 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:247: TypeError: Cannot read property of null
2020-03-08 09:58:13,891 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:173: TypeError: Cannot read property of null
2020-03-08 09:58:13,893 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:175: TypeError: Cannot read property of null
2020-03-08 09:58:13,895 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:190: TypeError: Cannot read property of null
2020-03-08 09:58:13,897 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:193: TypeError: Cannot read property of null
2020-03-08 09:58:13,899 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:60: TypeError: Cannot read property of null
2020-03-08 09:58:13,901 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:248: TypeError: Cannot read property of null
2020-03-08 09:58:13,903 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:294: TypeError: Cannot read property of null
2020-03-08 09:58:13,905 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:26: TypeError: Cannot read property of null
2020-03-08 09:58:13,907 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:27: TypeError: Cannot read property of null
2020-03-08 09:58:13,910 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:388: TypeError: Cannot read property of null
2020-03-08 09:58:13,912 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:390: TypeError: Cannot read property of null
2020-03-08 09:58:13,914 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:391: TypeError: Cannot read property of null
2020-03-08 09:58:13,916 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:26: TypeError: Cannot read property of null
2020-03-08 09:58:13,918 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:27: TypeError: Cannot read property of null
2020-03-08 09:58:13,920 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:24: TypeError: Cannot read property of null
2020-03-08 09:58:13,922 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:30: TypeError: Cannot read property of null
2020-03-08 09:58:13,924 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:39: TypeError: Cannot read property of null
2020-03-08 09:58:13,926 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:24: TypeError: Cannot read property of null
2020-03-08 09:58:13,928 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:30: TypeError: Cannot read property of null
2020-03-08 09:58:13,931 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:39: TypeError: Cannot read property of null
2020-03-08 09:58:13,933 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:24: TypeError: Cannot read property of null
2020-03-08 09:58:13,935 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:30: TypeError: Cannot read property of null
2020-03-08 09:58:13,936 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:39: TypeError: Cannot read property of null
2020-03-08 09:58:13,939 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupTooltip.qml:67: TypeError: Cannot read property of null
2020-03-08 09:58:13,941 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupTooltip.qml:69: TypeError: Cannot read property of null
2020-03-08 09:58:13,943 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupTooltip.qml:71: TypeError: Cannot read property of null
2020-03-08 09:58:13,945 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:150: TypeError: Cannot read property of null
2020-03-08 09:58:13,947 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-03-08 09:58:13,949 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:166: TypeError: Cannot read property of null
2020-03-08 09:58:13,951 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:167: TypeError: Cannot read property of null
2020-03-08 09:58:13,953 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:178: TypeError: Cannot read property of null
2020-03-08 09:58:13,955 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:231: TypeError: Cannot read property of null
2020-03-08 09:58:13,957 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:241: TypeError: Cannot read property of null
2020-03-08 09:58:15,187 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [225]: Starting to slice...
2020-03-08 09:58:15,188 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [243]: Going to slice build plate [0]!
2020-03-08 09:58:15,198 - DEBUG - [MainThread] UM.Backend.Backend._createSocket [213]: Previous socket existed. Closing that first.
2020-03-08 09:58:15,205 - WARNING - [Thread-4] UM.Decorators.deprecated_function [20]: <function GlobalStack.extruders at 0x600007dd1a88> is deprecated (since 4.4): Please use extruderList instead.
2020-03-08 09:58:15,255 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [173]: Socket state changed to Listening
2020-03-08 09:58:15,293 - INFO - [MainThread] UM.Backend.Backend.startEngine [81]: Started engine process: /Applications/Ultimaker Cura 3.app/Contents/MacOS/CuraEngine
2020-03-08 09:58:15,297 - DEBUG - [MainThread] UM.Backend.Backend._backendLog [101]: [Backend] Calling engine with: ['/Applications/Ultimaker Cura 3.app/Contents/MacOS/CuraEngine', 'connect', '127.0.0.1:49674', '']
2020-03-08 09:58:15,336 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-03-08 09:58:15,348 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] Cura_SteamEngine version 4.5.0
2020-03-08 09:58:15,353 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [177]: Socket state changed to Connected
2020-03-08 09:58:15,371 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] Copyright (C) 2019 Ultimaker
2020-03-08 09:58:15,398 - DEBUG - [MainThread] UM.Backend.Backend._onSocketStateChanged [167]: Backend connected on port 49674
2020-03-08 09:58:15,454 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-03-08 09:58:15,481 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] This program is free software: you can redistribute it and/or modify
2020-03-08 09:58:15,484 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] it under the terms of the GNU Affero General Public License as published by
2020-03-08 09:58:15,487 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] the Free Software Foundation, either version 3 of the License, or
2020-03-08 09:58:15,491 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] (at your option) any later version.
2020-03-08 09:58:15,494 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-03-08 09:58:15,497 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] This program is distributed in the hope that it will be useful,
2020-03-08 09:58:15,500 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] but WITHOUT ANY WARRANTY; without even the implied warranty of
2020-03-08 09:58:15,504 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
2020-03-08 09:58:15,507 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] GNU Affero General Public License for more details.
2020-03-08 09:58:15,509 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-03-08 09:58:15,511 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] You should have received a copy of the GNU Affero General Public License
2020-03-08 09:58:15,513 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] along with this program.  If not, see <http://www.gnu.org/licenses/>.
2020-03-08 09:58:15,620 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onStartSliceCompleted [429]: Sending slice message took 0.4316401481628418 seconds
2020-03-08 09:58:15,804 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING]  -s speed_prime_tower="50" -s print_bed_temperature="60" -s machine_steps_per_mm_z="50" -s wall_0_extruder_nr="-1" -s support_interface_skip_height="0.3" -s support_initial_layer_line_distance="2.3333333333333335" -s retract_at_layer_change="False" -s support_bottom_extruder_nr="0" -s minimum_support_area="0.0" -s bridge_wall_coast="100" -s material_bed_temp_wait="True" -s magic_spiralize="False" -s support_bottom_line_width="0.35" -s machine_minimum_feedrate="0.0" -s small_feature_speed_factor="50" -s cool_fan_speed="100.0" -s support_enable="False" -s command_line_settings="0" -s raft_base_line_width="0.8" -s support_skip_some_zags="False" -s speed_print="50" -s machine_depth="120" -s raft_surface_speed="25.0" -s support_roof_enable="False" -s alternate_extra_perimeter="False" -s skin_angles="[ ]" -s cool_min_speed="10" -s jerk_skirt_brim="20" -s raft_interface_acceleration="3000" -s support_skip_zag_per_mm="20" -s roofing_material_flow="100" -s machine_name="Monoprice Select Mini V2" -s wipe_pause="0" -s wipe_retraction_prime_speed="40" -s support_use_towers="True" -s support_mesh="False" -s support_roof_pattern="concentric" -s travel_avoid_other_parts="True" -s support_interface_material_flow="100" -s infill_overlap="10" -s machine_max_feedrate_z="1.5" -s cool_fan_full_layer="2" -s support_bottom_line_distance="0.35" -s support_bottom_pattern="concentric" -s speed_topbottom="20" -s raft_smoothing="5" -s roofing_line_width="0.35" -s magic_mesh_surface_mode="normal" -s acceleration_prime_tower="3000" -s meshfix_maximum_deviation="0.05" -s speed_travel_layer_0="72.0" -s magic_fuzzy_skin_thickness="0.3" -s meshfix_extensive_stitching="False" -s raft_base_thickness="0.30625" -s support_type="everywhere" -s skin_edge_support_layers="0" -s draft_shield_dist="10" -s skin_no_small_gaps_heuristic="False" -s jerk_wall_x="20" -s retraction_min_travel="0.7" -s support_roof_line_width="0.35" -s bottom_thickness="0.72" -s retraction_extra_prime_amount="0" -s material_print_temperature_layer_0="215" -s acceleration_support="3000" -s top_bottom_extruder_nr="-1" -s adhesion_z_offset="0" -s mold_roof_height="0.5" -s support_extruder_nr_layer_0="0" -s meshfix_maximum_travel_resolution="0.7" -s clean_between_layers="False" -s wireframe_top_jump="0.6" -s top_bottom_pattern_0="lines" -s support_conical_min_width="5.0" -s machine_disallowed_areas="[]" -s gantry_height="120" -s material_surface_energy="100" -s jerk_wall="20" -s top_bottom_thickness="0.72" -s brim_line_count="15" -s support_roof_line_distance="0.35" -s jerk_support_interface="20" -s cool_fan_speed_min="100.0" -s wipe_move_distance="20" -s minimum_roof_area="1.0" -s brim_replaces_support="True" -s speed_z_hop="10" -s bridge_skin_material_flow="60" -s bridge_skin_material_flow_2="100" -s infill_sparse_thickness="0.13125" -s small_feature_speed_factor_0="50" -s raft_surface_line_width="0.35" -s infill_enable_travel_optimization="False" -s machine_heat_zone_length="16" -s material_end_of_filament_purge_speed="0.5" -s acceleration_support_infill="3000" -s brim_gap="0" -s layer_0_z_overlap="0.13125" -s infill_material_flow="100" -s speed_support_roof="25.0" -s wireframe_drag_along="0.6" -s print_temperature="210" -s xy_offset_layer_0="0" -s support_interface_height="1" -s ironing_pattern="zigzag" -s raft_interface_thickness="0.21875" -s travel_compensate_overlapping_walls_enabled="True" -s support_line_width="0.35" -s ooze_shield_enabled="False" -s support_interface_offset="0.0" -s support_tree_enable="False" -s retraction_hop_after_extruder_switch_height="1" -s bridge_skin_density_2="75" -s speed_wall_x="50" -s adhesion_type="skirt" -s default_material_bed_temperature="60" -s machine_max_jerk_z="0.4" -s support_tree_angle="40" -s material_linear_advance_factor_support_interface="0" -s conical_overhang_enabled="False" -s support_pattern="zigzag" -s extruder_prime_pos_y="0" -s jerk_layer_0="20" -s travel_compensate_overlapping_walls_0_enabled="True" -s sub_div_rad_add="0.35" -s infill_multiplier="1" -s support_infill_rate="15" -s material_anti_ooze_retracted_position="-4" -s jerk_print_layer_0="20" -s wireframe_roof_inset="3" -s cool_fan_speed_0="0" -s support_brim_line_count="23" -s blackmagic="0" -s infill_support_enabled="False" -s raft_interface_speed="18.75" -s travel_avoid_distance="0.625" -s support_bottom_enable="False" -s dual="0" -s cross_infill_pocket_size="3.1818181818181817" -s wall_line_width_0="0.35" -s support_top_distance="0.1" -s retraction_hop_after_extruder_switch="True" -s material_guid="" -s support_mesh_drop_down="True" -s ironing_line_spacing="0.1" -s mold_enabled="False" -s jerk_travel_layer_0="30.0" -s speed_slowdown_layers="2" -s default_material_print_temperature="210" -s roofing_layer_count="0" -s infill_mesh_order="0" -s support="0" -s spaghetti_infill_enabled="False" -s raft_fan_speed="0" -s machine_max_acceleration_y="800" -s meshfix="0" -s acceleration_skirt_brim="3000" -s switch_extruder_extra_prime_amount="0" -s wireframe_flow="100" -s jerk_ironing="20" -s roofing_angles="[ ]" -s top_skin_expand_distance="1.0499999999999998" -s acceleration_ironing="3000" -s prime_tower_flow="100" -s bridge_wall_material_flow="50" -s travel="0" -s switch_extruder_prime_speed="20" -s wall_x_extruder_nr="-1" -s cool_fan_speed_max="100.0" -s wall_overhang_angle="90" -s cool_fan_enabled="True" -s support_roof_height="1" -s material="0" -s infill_before_walls="True" -s material_bed_temp_prepend="True" -s wireframe_printspeed_bottom="5" -s skin_preshrink="1.0499999999999998" -s wall_0_wipe_dist="0.2" -s material_linear_advance_factor_wall_0="0" -s bottom_skin_preshrink="1.0499999999999998" -s support_xy_distance_overhang="0.2" -s machine_gcode_flavor="RepRap (Marlin/Sprinter)" -s wireframe_roof_fall_down="2" -s wireframe_strategy="compensate" -s machine_endstop_positive_direction_y="False" -s wireframe_top_delay="0" -s spaghetti_max_infill_angle="10" -s acceleration_support_interface="3000" -s speed_layer_0="30" -s time="09:58:15" -s machine_buildplate_type="glass" -s raft_base_jerk="20" -s machine_nozzle_id="unknown" -s wipe_brush_pos_x="100" -s acceleration_travel_layer_0="5000.0" -s speed_equalize_flow_max="150" -s bridge_skin_support_threshold="50" -s machine_max_jerk_e="5" -s raft_margin="5" -s wireframe_fall_down="0.5" -s support_offset="0" -s material_flow="100" -s cool_min_layer_time="5" -s material_linear_advance_factor="0" -s adhesion_z_offset_extensive_processing="False" -s meshfix_union_all="True" -s support_z_distance="0.1" -s material_linear_advance_factor_skirt_brim="0" -s layer_height_0="0.2625" -s bridge_fan_speed_2="0" -s initial_bottom_layers="6" -s support_interface_pattern="concentric" -s bridge_skin_material_flow_3="110" -s bridge_wall_speed="18.75" -s support_bottom_offset="0.0" -s material_linear_advance_factor_infill="0" -s material_print_temp_prepend="True" -s wireframe_printspeed_down="5" -s support_bottom_material_flow="100" -s ironing_enabled="False" -s acceleration_travel="5000" -s acceleration_wall="3000" -s raft_base_acceleration="3000" -s wall_extruder_nr="-1" -s skin_overlap="5" -s print_sequence="all_at_once" -s material_linear_advance_factor_prime_tower="0" -s retraction_prime_speed="40" -s z_seam_type="sharpest_corner" -s spaghetti_inset="0.2" -s speed_support_bottom="25.0" -s material_extrusion_cool_down_speed="0.7" -s wipe_repeat_count="5" -s meshfix_maximum_resolution="0.5" -s gradual_support_infill_step_height="1" -s adhesion_extruder_nr="0" -s mold_width="5" -s jerk_support_infill="20" -s wall_overhang_speed_factor="100" -s raft_acceleration="3000" -s support_bottom_height="1" -s acceleration_support_roof="3000" -s support_roof_offset="0.0" -s speed_roofing="20" -s support_bottom_stair_step_height="0.3" -s brim_outside_only="True" -s material_standby_temperature="150" -s raft_surface_layers="1" -s skirt_brim_minimal_length="250" -s travel_compensate_overlapping_walls_x_enabled="True" -s wireframe_flow_connection="100" -s machine_nozzle_expansion_angle="45" -s adaptive_layer_height_enabled="False" -s spaghetti_infill_extra_volume="0" -s support_connect_zigzags="True" -s jerk_support_roof="20" -s machine_extruder_count="1" -s wireframe_flow_flat="100" -s speed_print_layer_0="30" -s raft_jerk="20" -s prime_tower_min_volume="6" -s material_bed_temperature="60" -s draft_shield_height="10" -s retraction_combing_max_distance="0" -s z_seam_x="60.0" -s infill_line_distance="3.1818181818181817" -s minimum_bottom_area="1.0" -s xy_offset="0" -s extruders_enabled_count="1" -s machine_end_gcode="G0 X0 Y120;(Stick out the part)
2020-03-08 09:58:15,807 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] M190 S0;(Turn off heat bed, don't wait.)
2020-03-08 09:58:15,809 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] G92 E10;(Set extruder to 10)
2020-03-08 09:58:15,812 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] G1 E7 F200;(retract 3mm)
2020-03-08 09:58:15,815 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] M104 S0;(Turn off nozzle, don't wait)
2020-03-08 09:58:15,818 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] G4 S300;(Delay 5 minutes)
2020-03-08 09:58:15,822 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] M107;(Turn off part fan)
2020-03-08 09:58:15,824 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] M84;(Turn off stepper motors.)" -s machine_center_is_zero="False" -s jerk_print="20" -s magic_fuzzy_skin_point_dist="0.8" -s bridge_skin_speed_3="10" -s spaghetti_flow="20" -s filter_out_tiny_gaps="True" -s skin_outline_count="1" -s jerk_prime_tower="20" -s wireframe_nozzle_clearance="1" -s speed_infill="50" -s material_linear_advance_factor_topbottom="0" -s wireframe_enabled="False" -s skirt_line_count="2" -s retraction_count_max="90" -s gradual_support_infill_steps="0" -s connect_infill_polygons="False" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s connect_skin_polygons="False" -s infill_pattern="grid" -s infill_wipe_dist="0.0875" -s bottom_skin_expand_distance="1.0499999999999998" -s retraction_hop="1" -s jerk_wall_0="20" -s support_roof_extruder_nr="0" -s acceleration_enabled="False" -s machine_show_variants="True" -s gradual_infill_steps="0" -s jerk_infill="20" -s wall_0_inset="0.025000000000000022" -s relative_extrusion="False" -s wipe_retraction_amount="2.5" -s material_break_temperature="50" -s machine_steps_per_mm_y="50" -s wireframe_printspeed="5" -s support_tree_branch_diameter="2" -s wipe_hop_amount="1" -s support_join_distance="2.0" -s speed_equalize_flow_enabled="False" -s wall_line_width="0.35" -s skin_material_flow="100" -s support_bottom_density="100" -s flow_rate_extrusion_offset_factor="100" -s carve_multiple_volumes="False" -s acceleration_wall_x="3000" -s acceleration_roofing="3000" -s retraction_hop_enabled="False" -s switch_extruder_retraction_speed="20" -s top_skin_preshrink="1.0499999999999998" -s initial_layer_line_width_factor="100.0" -s machine_start_gcode="G21;(metric values)
2020-03-08 09:58:15,827 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] G90;(absolute positioning)
2020-03-08 09:58:15,829 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] M82;(set extruder to absolute mode)
2020-03-08 09:58:15,832 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] M107;(start with the fan off)
2020-03-08 09:58:15,836 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] G28;(Home the printer)
2020-03-08 09:58:15,840 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] G92 E0;(Reset the extruder to 0)
2020-03-08 09:58:15,843 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] G0 Z5 E5 F500;(Move up and prime the nozzle)
2020-03-08 09:58:15,846 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] G0 X-1 Z0;(Move outside the printable area)
2020-03-08 09:58:15,849 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] G1 Y60 E8 F500;(Draw a priming/wiping line to the rear)
2020-03-08 09:58:15,851 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] G1 X-1;(Move a little closer to the print area)
2020-03-08 09:58:15,853 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] G1 Y10 E16 F500;(draw more priming/wiping)
2020-03-08 09:58:15,857 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] G1 E15 F250;(Small retract)
2020-03-08 09:58:15,860 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] G92 E0;(Zero the extruder)" -s material_diameter="2.85" -s flow_rate_max_extrusion_offset="0" -s platform_adhesion="0" -s support_bottom_stair_step_width="5.0" -s machine_acceleration="4000" -s cool_min_layer_time_fan_speed_max="10" -s prime_blob_enable="False" -s meshfix_keep_open_polygons="False" -s machine_extruders_share_heater="False" -s speed_wall_0="37.5" -s cool_lift_head="False" -s material_break_speed="25" -s machine_max_acceleration_z="20" -s support_wall_count="0" -s skin_edge_support_thickness="0" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s wall_min_flow_retract="False" -s minimum_polygon_circumference="1.0" -s wipe_hop_speed="10" -s date="08-03-2020" -s speed_support="37.5" -s ironing_inset="0.175" -s wireframe_roof_outer_delay="0.2" -s bridge_fan_speed_3="0" -s z_seam_y="120" -s support_interface_enable="False" -s bridge_skin_density_3="80" -s shell="0" -s support_infill_angles="[ ]" -s infill_extruder_nr="-1" -s infill_sparse_density="22" -s wall_thickness="1.05" -s material_crystallinity="False" -s machine_steps_per_mm_e="1600" -s support_bottom_distance="0.1" -s prime_tower_line_width="0.35" -s spaghetti_infill_stepped="True" -s machine_max_feedrate_e="100" -s infill_line_width="0.35" -s magic_fuzzy_skin_outside_only="False" -s jerk_support_bottom="20" -s material_print_temp_wait="True" -s support_roof_angles="[ ]" -s support_interface_angles="[ ]" -s small_feature_max_length="0.0" -s skin_overlap_mm="0.0175" -s material_flush_purge_length="60" -s raft_interface_line_spacing="0.8999999999999999" -s machine_nozzle_heat_up_speed="2.0" -s adaptive_layer_height_threshold="0.2" -s top_thickness="0.72" -s bridge_skin_density="100" -s wall_min_flow="0" -s ironing_flow="10.0" -s support_tree_collision_resolution="0.175" -s raft_base_fan_speed="0" -s bridge_settings_enabled="False" -s support_roof_material_flow="100" -s machine_max_feedrate_y="150" -s alternate_carve_order="True" -s wipe_retraction_enable="True" -s day="Sun" -s support_tree_branch_diameter_angle="5" -s experimental="0" -s prime_tower_position_x="115.65" -s bridge_wall_min_length="5" -s machine_steps_per_mm_x="50" -s jerk_topbottom="20" -s remove_empty_first_layers="True" -s prime_tower_size="20" -s jerk_roofing="20" -s travel_speed="120" -s speed="0" -s cutting_mesh="False" -s machine_max_jerk_xy="20" -s material_adhesion_tendency="10" -s extruder_prime_pos_abs="False" -s nozzle_disallowed_areas="[]" -s support_interface_extruder_nr="0" -s support_tower_maximum_supported_diameter="3.0" -s wipe_retraction_extra_prime_amount="0" -s material_break_preparation_retracted_position="-16" -s infill_mesh="False" -s layer_height="0.13125" -s support_brim_width="8.0" -s machine_nozzle_head_distance="3" -s prime_tower_brim_enable="False" -s gradual_infill_step_height="1.5" -s outer_inset_first="False" -s support_tower_roof_angle="65" -s extruder_prime_pos_z="0" -s skirt_gap="3" -s machine_width="120" -s machine_max_feedrate_x="150" -s anti_overhang_mesh="False" -s travel_retract_before_outer_wall="False" -s machine_height="120" -s retraction_extrusion_window="2.5" -s support_fan_enable="False" -s coasting_enable="True" -s support_interface_density="100" -s support_material_flow="100" -s bridge_fan_speed="100" -s support_infill_extruder_nr="0" -s infill="0" -s coasting_speed="90" -s jerk_travel="30" -s ooze_shield_angle="60" -s machine_endstop_positive_direction_x="False" -s material_final_print_temperature="195" -s acceleration_print="3000" -s material_linear_advance_factor_wall_x="0" -s speed_support_infill="37.5" -s max_extrusion_before_wipe="10" -s raft_base_line_spacing="1.6" -s retraction_enable="True" -s support_line_distance="2.3333333333333335" -s material_print_temperature="210" -s mold_angle="40" -s raft_speed="25.0" -s retraction_amount="2.5" -s wipe_retraction_speed="40" -s support_tower_diameter="3.0" -s material_break_retracted_position="-50" -s material_initial_print_temperature="200" -s resolution="0" -s wireframe_printspeed_up="5" -s support_infill_sparse_thickness="0.13125" -s material_bed_temperature_layer_0="65" -s adaptive_layer_height_variation="0.1" -s cross_infill_density_image="" -s skirt_brim_speed="30" -s machine_nozzle_temp_enabled="True" -s material_maximum_park_duration="300" -s switch_extruder_retraction_amount="16" -s wall_line_width_x="0.35" -s jerk_support="20" -s bridge_skin_speed_2="10" -s raft_surface_fan_speed="0" -s max_skin_angle_for_expansion="90" -s raft_interface_line_width="0.7" -s infill_offset_x="0" -s magic_fuzzy_skin_enabled="False" -s jerk_enabled="False" -s support_zag_skip_count="9" -s machine_filament_park_distance="16" -s fill_outline_gaps="False" -s z_seam_position="back" -s infill_randomize_start_location="False" -s mesh_position_y="0" -s machine_max_acceleration_x="800" -s speed_support_interface="25.0" -s magic_fuzzy_skin_point_density="1.25" -s wall_line_count="3" -s wipe_retraction_retract_speed="40" -s multiple_mesh_overlap="0.15" -s z_seam_corner="z_seam_corner_inner" -s machine_head_with_fans_polygon="[[-20, 10], [10, 10], [10, -10], [-20, -10]]" -s wall_material_flow="100" -s material_flow_layer_0="100" -s retraction_combing="noskin" -s travel_avoid_supports="False" -s acceleration_infill="3000" -s machine_nozzle_size="0.4" -s raft_interface_jerk="20" -s material_shrinkage_percentage="0" -s material_break_preparation_temperature="210" -s bridge_skin_speed="10" -s skirt_brim_material_flow="100" -s retraction_speed="40" -s wall_0_material_flow="100" -s material_no_load_move_factor="0.940860215" -s raft_surface_line_spacing="0.35" -s material_anti_ooze_retraction_speed="5" -s support_conical_enabled="False" -s cross_support_density_image="" -s z_seam_relative="False" -s wireframe_height="3" -s smooth_spiralized_contours="True" -s wireframe_straight_before_down="20" -s infill_angles="[ ]" -s minimum_interface_area="1.0" -s draft_shield_enabled="False" -s machine_nozzle_cool_down_speed="2.0" -s speed_ironing="13.333333333333334" -s machine_max_acceleration_e="10000" -s limit_support_retractions="True" -s material_linear_advance_factor_support="0" -s support_tree_branch_distance="1" -s wall_x_material_flow="100" -s min_skin_width_for_expansion="4.8220467716427034e-17" -s prime_tower_position_y="95.65" -s mesh_position_x="0" -s expand_skins_expand_distance="1.0499999999999998" -s roofing_pattern="lines" -s small_hole_max_size="0" -s acceleration_wall_0="3000" -s support_interface_line_width="0.35" -s support_bottom_angles="[ ]" -s infill_wall_line_count="0" -s support_supported_skin_fan_speed="100" -s draft_shield_height_limitation="full" -s wireframe_printspeed_flat="5" -s skin_line_width="0.35" -s machine_firmware_retract="False" -s switch_extruder_retraction_speeds="20" -s top_layers="6" -s initial_extruder_nr="0" -s meshfix_union_all_remove_holes="False" -s support_brim_enable="False" -s cool_fan_full_at_height="0.2625" -s machine_heated_build_volume="False" -s support_conical_angle="30" -s brim_width="5" -s raft_interface_fan_speed="0" -s fill_perimeter_gaps="everywhere" -s prime_tower_wipe_enabled="True" -s spaghetti_max_height="2.0" -s support_roof_density="100" -s acceleration_topbottom="3000" -s machine_settings="0" -s ironing_only_highest_layer="False" -s wireframe_flat_delay="0.1" -s bridge_sparse_infill_max_density="0" -s wireframe_bottom_delay="0" -s line_width="0.35" -s optimize_wall_printing_order="False" -s zig_zaggify_support="False" -s wipe_hop_enable="False" -s acceleration_print_layer_0="3000" -s speed_travel="120" -s support_angle="50" -s raft_base_speed="18.75" -s machine_shape="rectangular" -s machine_heated_bed="True" -s machine_use_extruder_offset_to_offset_coords="True" -s wireframe_roof_drag_along="0.8" -s acceleration_support_bottom="3000" -s material_end_of_filament_purge_length="20" -s material_break_preparation_speed="2" -s acceleration_layer_0="3000" -s support_xy_overrides_z="z_overrides_xy" -s min_infill_area="0" -s machine_nozzle_tip_outer_diameter="1" -s cooling="0" -s raft_airgap="0.2625" -s material_flush_purge_speed="0.5" -s slicing_tolerance="middle" -s retraction_retract_speed="40" -s layer_start_y="0.0" -s build_volume_temperature="28" -s extruder_prime_pos_x="0" -s infill_overlap_mm="0.035" -s mesh_position_z="0" -s conical_overhang_angle="50" -s zig_zaggify_infill="False" -s raft_surface_acceleration="3000" -s wireframe_up_half_speed="0.3" -s bridge_enable_more_layers="True" -s raft_surface_thickness="0.13125" -s prime_tower_enable="False" -s material_linear_advance_factor_wall="0" -s coasting_min_volume="0.8" -s support_xy_distance="0.7" -s speed_wall="25.0" -s infill_support_angle="40" -s adaptive_layer_height_variation_step="0.01" -s raft_surface_jerk="20" -s layer_start_x="0.0" -s machine_min_cool_heat_time_window="50.0" -s ooze_shield_dist="2" -s material_flow_dependent_temperature="False" -s bottom_layers="6" -s infill_offset_y="0" -s machine_feeder_wheel_diameter="10.0" -s retraction_hop_only_when_collides="False" -s roofing_extruder_nr="-1" -s skirt_brim_line_width="0.35" -s center_object="False" -s top_bottom_pattern="lines" -s support_extruder_nr="0" -s coasting_volume="0.064" -s machine_endstop_positive_direction_z="True" -e0 -s speed_prime_tower="50" -s machine_steps_per_mm_z="50" -s jerk_support_roof="20" -s support_interface_skip_height="0.3" -s support_interface_offset="0.0" -s support_initial_layer_line_distance="2.3333333333333335" -s retract_at_layer_change="False" -s minimum_support_area="0.0" -s bridge_wall_coast="100" -s support_bottom_line_width="0.35" -s machine_nozzle_offset_x="0" -s small_feature_speed_factor="50" -s switch_extruder_prime_speed="20" -s cool_fan_speed="100.0" -s command_line_settings="0" -s experimental="0" -s raft_base_line_width="0.8" -s support_skip_some_zags="False" -s machine_nozzle_offset_y="0" -s speed_print="50" -s raft_surface_speed="25.0" -s support_roof_enable="False" -s alternate_extra_perimeter="False" -s skin_angles="[ ]" -s cool_min_speed="10" -s machine_extruder_end_pos_x="0" -s jerk_skirt_brim="20" -s raft_interface_acceleration="3000" -s material_break_preparation_retracted_position="-16" -s support_skip_zag_per_mm="20" -s roofing_material_flow="100" -s skin_overlap="5" -s wipe_pause="0" -s wipe_retraction_prime_speed="40" -s support_use_towers="True" -s support_roof_pattern="concentric" -s travel_avoid_other_parts="True" -s cool_fan_full_layer="2" -s support_bottom_line_distance="0.35" -s material_linear_advance_factor_topbottom="0" -s support_bottom_pattern="concentric" -s speed_topbottom="20" -s raft_smoothing="5" -s roofing_line_width="0.35" -s magic_mesh_surface_mode="normal" -s acceleration_prime_tower="3000" -s meshfix_maximum_deviation="0.05" -s speed_travel_layer_0="72.0" -s skin_edge_support_layers="0" -s skin_no_small_gaps_heuristic="False" -s wipe_hop_enable="False" -s zig_zaggify_support="False" -s bridge_fan_speed="100" -s support_material_flow="100" -s retraction_extra_prime_amount="0" -s support_supported_skin_fan_speed="100" -s infill_wall_line_count="0" -s acceleration_support_interface="3000" -s spaghetti_max_infill_angle="10" -s resolution="0" -s support_interface_pattern="concentric" -s bridge_skin_material_flow_3="110" -s initial_bottom_layers="6" -s bridge_fan_speed_2="0" -s mold_roof_height="0.5" -s meshfix_maximum_travel_resolution="0.7" -s extruder_prime_pos_x="0" -s layer_start_y="0.0" -s top_bottom_pattern_0="lines" -s support_conical_min_width="5.0" -s cool_fan_speed_min="100.0" -s wipe_move_distance="20" -s brim_replaces_support="True" -s extruder_prime_pos_z="0" -s support_tower_roof_angle="65" -s speed_z_hop="10" -s skirt_brim_speed="30" -s switch_extruder_retraction_amount="16" -s material_maximum_park_duration="300" -s machine_nozzle_temp_enabled="True" -s top_bottom_thickness="0.72" -s raft_base_speed="18.75" -s support_angle="50" -s machine_steps_per_mm_e="1600" -s material_crystallinity="False" -s support_bottom_distance="0.1" -s wall_thickness="1.05" -s material_flush_purge_length="60" -s machine_nozzle_heat_up_speed="2.0" -s raft_interface_line_spacing="0.8999999999999999" -s support_bottom_material_flow="100" -s acceleration_travel="5000" -s acceleration_wall="3000" -s ironing_enabled="False" -s raft_surface_line_width="0.35" -s acceleration_support_infill="3000" -s brim_gap="0" -s support_line_width="0.35" -s jerk_prime_tower="20" -s skin_outline_count="1" -s support_interface_height="1" -s support_conical_enabled="False" -s material_anti_ooze_retraction_speed="5" -s z_seam_corner="z_seam_corner_inner" -s wipe_retraction_speed="40" -s retraction_amount="2.5" -s raft_interface_thickness="0.21875" -s jerk_wall_0="20" -s retraction_hop="1" -s infill_sparse_thickness="0.13125" -s extruder_prime_pos_abs="False" -s material_adhesion_tendency="0" -s support_tree_angle="40" -s conical_overhang_enabled="False" -s extruder_prime_pos_y="0" -s travel_compensate_overlapping_walls_0_enabled="True" -s infill_multiplier="1" -s support_infill_rate="15" -s jerk_wall_x="20" -s cool_fan_speed_0="0" -s support_brim_line_count="23" -s blackmagic="0" -s infill_support_enabled="False" -s raft_interface_speed="18.75" -s travel_avoid_distance="0.625" -s support_bottom_enable="False" -s dual="0" -s cross_infill_pocket_size="7.0" -s wall_line_width_0="0.35" -s support_top_distance="0.1" -s retraction_hop_after_extruder_switch="True" -s support_bottom_offset="0.0" -s bridge_wall_speed="18.75" -s meshfix_union_all="True" -s support_z_distance="0.1" -s material_guid="0ff92885-617b-4144-a03c-9989872454bc" -s ironing_line_spacing="0.1" -s mold_enabled="False" -s jerk_travel_layer_0="30.0" -s support_connect_zigzags="True" -s spaghetti_infill_extra_volume="0" -s spaghetti_flow="20" -s magic_fuzzy_skin_point_dist="0.8" -s filter_out_tiny_gaps="True" -s bridge_skin_speed_3="10" -s default_material_print_temperature="200" -s roofing_layer_count="0" -s mold_angle="40" -s raft_speed="25.0" -s raft_fan_speed="0" -s material_anti_ooze_retracted_position="-4" -s jerk_print_layer_0="20" -s meshfix="0" -s acceleration_skirt_brim="3000" -s jerk_layer_0="20" -s switch_extruder_extra_prime_amount="0" -s jerk_ironing="20" -s roofing_angles="[ ]" -s top_skin_expand_distance="1.0499999999999998" -s acceleration_ironing="3000" -s prime_tower_flow="100" -s support_tree_branch_diameter="2" -s machine_steps_per_mm_y="50" -s bridge_wall_material_flow="50" -s wall_min_flow_retract="False" -s connect_infill_polygons="False" -s machine_extruder_start_code="" -s travel="0" -s xy_offset_layer_0="0" -s cool_fan_speed_max="100.0" -s wall_overhang_angle="90" -s cool_fan_enabled="True" -s support_infill_sparse_thickness="0.13125" -s support_roof_height="1" -s clean_between_layers="False" -s skin_preshrink="1.0499999999999998" -s raft_surface_acceleration="3000" -s wall_0_wipe_dist="0.2" -s material_linear_advance_factor_wall_0="0" -s sub_div_rad_add="0.35" -s bottom_skin_preshrink="1.0499999999999998" -s support_xy_distance_overhang="0.2" -s infill_enable_travel_optimization="False" -s speed_layer_0="30" -s speed_wall_x="50" -s raft_base_jerk="20" -s magic_fuzzy_skin_enabled="False" -s prime_tower_min_volume="6" -s machine_nozzle_id="unknown" -s wipe_brush_pos_x="100" -s acceleration_travel_layer_0="5000.0" -s speed_equalize_flow_max="150" -s bridge_skin_support_threshold="50" -s material_end_of_filament_purge_speed="0.5" -s raft_margin="5" -s support_offset="0" -s material_flow="100" -s material_linear_advance_factor_wall_x="0" -s acceleration_print="3000" -s multiple_mesh_overlap="0.15" -s wipe_retraction_retract_speed="40" -s cool_min_layer_time="5" -s material_linear_advance_factor="0" -s machine_extruder_start_pos_abs="False" -s acceleration_support="3000" -s support="0" -s spaghetti_infill_enabled="False" -s retraction_hop_after_extruder_switch_height="1" -s machine_extruder_end_pos_abs="False" -s material_linear_advance_factor_infill="0" -s minimum_roof_area="1.0" -s machine_extruder_cooling_fan_number="0" -s speed_support_bottom="25.0" -s material_extrusion_cool_down_speed="0.7" -s wipe_repeat_count="5" -s meshfix_maximum_resolution="0.5" -s gradual_support_infill_step_height="1" -s raft_acceleration="3000" -s support_bottom_height="1" -s acceleration_support_roof="3000" -s support_roof_offset="0.0" -s wall_material_flow="100" -s material_flow_layer_0="100" -s meshfix_union_all_remove_holes="False" -s skin_edge_support_thickness="0" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s support_wall_count="0" -s material_diameter="1.75" -s travel_compensate_overlapping_walls_x_enabled="True" -s speed_print_layer_0="30" -s raft_jerk="20" -s xy_offset="0" -s speed_infill="50" -s cool_lift_head="False" -s speed_wall_0="37.5" -s outer_inset_first="False" -s gradual_infill_step_height="1.5" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s support_join_distance="2.0" -s wipe_hop_amount="1" -s wipe_retraction_enable="True" -s infill_wipe_dist="0.0875" -s connect_skin_polygons="False" -s infill_pattern="grid" -s line_width="0.35" -s optimize_wall_printing_order="False" -s wipe_retraction_amount="2.5" -s material_break_temperature="50" -s top_skin_preshrink="1.0499999999999998" -s acceleration_roofing="3000" -s retraction_hop_enabled="False" -s switch_extruder_retraction_speed="20" -s support_bottom_stair_step_width="5.0" -s platform_adhesion="0" -s machine_steps_per_mm_x="50" -s z_seam_x="60.0" -s retraction_combing_max_distance="0" -s speed_equalize_flow_enabled="False" -s wall_line_width="0.35" -s skin_material_flow="100" -s support_bottom_density="100" -s acceleration_wall_x="3000" -s machine_nozzle_cool_down_speed="2.0" -s skirt_brim_material_flow="100" -s bridge_skin_speed="10" -s cool_min_layer_time_fan_speed_max="10" -s prime_blob_enable="False" -s meshfix_keep_open_polygons="False" -s support_tower_maximum_supported_diameter="3.0" -s material_break_speed="25" -s speed_support="37.5" -s ironing_inset="0.175" -s bridge_fan_speed_3="0" -s jerk_print="20" -s bottom_skin_expand_distance="1.0499999999999998" -s z_seam_y="120" -s speed_support_roof="25.0" -s support_bottom_angles="[ ]" -s support_interface_line_width="0.35" -s support_interface_enable="False" -s bridge_skin_density_3="80" -s shell="0" -s support_infill_angles="[ ]" -s gradual_support_infill_steps="0" -s infill_sparse_density="10" -s jerk_support_interface="20" -s skirt_brim_minimal_length="250" -s raft_surface_layers="1" -s brim_line_count="15" -s support_roof_line_distance="0.35" -s prime_tower_line_width="0.35" -s infill_line_width="0.35" -s magic_fuzzy_skin_outside_only="False" -s roofing_pattern="lines" -s support_interface_material_flow="100" -s infill_overlap="10" -s extruder_nr="0" -s jerk_support_bottom="20" -s support_roof_angles="[ ]" -s bottom_thickness="0.72" -s support_interface_angles="[ ]" -s small_feature_max_length="0.0" -s skin_overlap_mm="0.0175" -s retraction_retract_speed="40" -s zig_zaggify_infill="False" -s infill_overlap_mm="0.035" -s mesh_position_z="0" -s conical_overhang_angle="50" -s bridge_skin_density="100" -s wall_min_flow="0" -s ironing_flow="10.0" -s support_tree_branch_diameter_angle="5" -s jerk_roofing="20" -s speed="0" -s wipe_retraction_extra_prime_amount="0" -s skirt_line_count="2" -s retraction_count_max="90" -s support_xy_overrides_z="z_overrides_xy" -s machine_nozzle_tip_outer_diameter="1" -s min_infill_area="0" -s magic_fuzzy_skin_thickness="0.3" -s meshfix_extensive_stitching="False" -s material_flow_dependent_temperature="False" -s bottom_layers="6" -s infill_offset_y="0" -s support_brim_width="8.0" -s machine_nozzle_head_distance="3" -s cross_support_density_image="" -s z_seam_relative="False" -s slicing_tolerance="middle" -s machine_extruder_end_pos_y="0" -s skirt_gap="3" -s infill_material_flow="100" -s material_break_preparation_temperature="200" -s jerk_travel="30" -s material_linear_advance_factor_skirt_brim="0" -s machine_endstop_positive_direction_x="False" -s material_final_print_temperature="185" -s wall_line_count="3" -s magic_fuzzy_skin_point_density="1.25" -s infill_randomize_start_location="False" -s mesh_position_y="0" -s bridge_skin_material_flow_2="100" -s speed_support_interface="25.0" -s bridge_skin_density_2="75" -s machine_extruder_start_pos_x="0" -s support_tower_diameter="3.0" -s machine_min_cool_heat_time_window="50.0" -s layer_start_x="0.0" -s wall_line_width_x="0.35" -s jerk_support="20" -s bridge_skin_speed_2="10" -s top_thickness="0.72" -s material="0" -s infill_before_walls="True" -s small_hole_max_size="0" -s acceleration_wall_0="3000" -s max_skin_angle_for_expansion="90" -s material_surface_energy="100" -s raft_interface_line_width="0.7" -s infill_offset_x="0" -s support_zag_skip_count="9" -s machine_filament_park_distance="16" -s fill_outline_gaps="False" -s cross_infill_density_image="" -s raft_surface_fan_speed="0" -s spaghetti_infill_stepped="True" -s machine_endstop_positive_direction_y="False" -s minimum_bottom_area="1.0" -s infill_line_distance="7.0" -s z_seam_position="back" -s top_layers="6" -s material_linear_advance_factor_prime_tower="0" -s retraction_prime_speed="40" -s z_seam_type="sharpest_corner" -s material_no_load_move_factor="0.940860215" -s raft_surface_line_spacing="0.35" -s infill="0" -s coasting_speed="90" -s support_roof_material_flow="100" -s travel_avoid_supports="False" -s acceleration_infill="3000" -s machine_nozzle_size="0.4" -s raft_interface_jerk="20" -s material_shrinkage_percentage="0" -s retraction_speed="40" -s wall_0_material_flow="100" -s support_tree_branch_distance="1" -s wall_x_material_flow="100" -s min_skin_width_for_expansion="4.8220467716427034e-17" -s mesh_position_x="0" -s expand_skins_expand_distance="1.0499999999999998" -s material_linear_advance_factor_support="0" -s speed_ironing="13.333333333333334" -s limit_support_retractions="True" -s support_roof_line_width="0.35" -s jerk_wall="20" -s raft_base_acceleration="3000" -s retraction_extrusion_window="2.5" -s machine_extruder_start_pos_y="0" -s support_fan_enable="False" -s small_feature_speed_factor_0="50" -s coasting_volume="0.064" -s machine_endstop_positive_direction_z="True" -s skirt_brim_line_width="0.35" -s center_object="False" -s top_bottom_pattern="lines" -s mold_width="5" -s jerk_support_infill="20" -s wall_overhang_speed_factor="100" -s infill_support_angle="40" -s raft_surface_jerk="20" -s bridge_sparse_infill_max_density="0" -s speed_roofing="20" -s support_bottom_stair_step_height="0.3" -s brim_outside_only="True" -s material_standby_temperature="175" -s support_xy_distance="0.7" -s speed_wall="25.0" -s travel_compensate_overlapping_walls_enabled="True" -s acceleration_topbottom="3000" -s machine_settings="0" -s ironing_only_highest_layer="False" -s support_brim_enable="False" -s cool_fan_full_at_height="0.2625" -s support_conical_angle="30" -s wall_0_inset="0.025000000000000022" -s speed_support_infill="37.5" -s raft_base_line_spacing="1.6" -s max_extrusion_before_wipe="10" -s brim_width="5" -s layer_0_z_overlap="0.13125" -s ironing_pattern="zigzag" -s speed_travel="120" -s jerk_topbottom="20" -s raft_interface_fan_speed="0" -s fill_perimeter_gaps="everywhere" -s prime_tower_wipe_enabled="True" -s spaghetti_max_height="2.0" -s support_roof_density="100" -s acceleration_print_layer_0="3000" -s acceleration_support_bottom="3000" -s material_end_of_filament_purge_length="20" -s material_break_preparation_speed="2" -s retraction_min_travel="0.7" -s acceleration_layer_0="3000" -s support_pattern="zigzag" -s support_line_distance="2.3333333333333335" -s retraction_enable="True" -s support_interface_density="100" -s coasting_enable="True" -s machine_feeder_wheel_diameter="10.0" -s retraction_hop_only_when_collides="False" -s material_break_retracted_position="-50" -s material_initial_print_temperature="190" -s material_print_temperature_layer_0="205" -s support_tree_collision_resolution="0.175" -s raft_base_fan_speed="0" -s machine_heat_zone_length="16" -s gradual_infill_steps="0" -s raft_airgap="0.2625" -s material_flush_purge_speed="0.5" -s infill_angles="[ ]" -s minimum_interface_area="1.0" -s machine_extruder_end_code="" -s skin_line_width="0.35" -s raft_surface_thickness="0.13125" -s material_linear_advance_factor_wall="0" -s coasting_min_volume="0.8" -s initial_layer_line_width_factor="100.0" -s bridge_enable_more_layers="True" -s jerk_infill="20" -s switch_extruder_retraction_speeds="20" -s spaghetti_inset="0.2" -s material_linear_advance_factor_support_interface="0" -s bridge_skin_material_flow="60" -s material_print_temperature="200" -s wipe_hop_speed="10" -s cooling="0" -s raft_base_thickness="0.30625" -g -e0 -l "0" -s extruder_nr="0"
2020-03-08 09:58:19,091 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-08 09:58:19,095 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-08 09:58:19,105 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [663]: Slicing took 3.9169111251831055 seconds
2020-03-08 09:58:19,105 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [664]: Number of models per buildplate: {0: 1}
2020-03-08 09:58:19,105 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [678]: See if there is more to slice...
2020-03-08 09:58:19,328 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [181]: Socket state changed to Closing
2020-03-08 09:58:19,333 - DEBUG - [MainThread] UM.Backend.Backend._onSocketError [203]: Socket debug: Arcus Error (13): Closing socket because other side requested close.
2020-03-08 09:58:19,336 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [183]: Socket state changed to Closed
2020-03-08 09:58:19,336 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onBackendQuit [829]: Backend quit with return code 0. Resetting process and socket.
2020-03-08 09:58:23,337 - DEBUG - [MainThread] LinearAdvanceSettingPlugin.LinearAdvanceSettingPlugin._filterGcode [109]: No used extruders specify a linear advance factor
2020-03-08 09:58:23,399 - DEBUG - [MainThread] UM.Controller.setActiveStage [149]: Setting active stage to MonitorStage
2020-03-08 09:58:23,444 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:211: Error: Cannot assign [undefined] to QString
2020-03-08 09:58:23,469 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._processRequest [308]: Request [1627f4939ae6463ebec3fbdb680e5d46] started
2020-03-08 09:58:23,473 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-08 09:58:23,692 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestFinished [369]: Request [1627f4939ae6463ebec3fbdb680e5d46] finished.
2020-03-08 09:58:23,696 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-08 09:58:23,697 - INFO - [MainThread] SliceInfoPlugin.SliceInfo._onRequestFinished [275]: SliceInfo sent successfully
2020-03-08 09:58:24,183 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-03-08 09:58:26,079 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [772]: Resource created on OctoPrint instance: http://192.168.2.171:5001/api/files/local/MSMV2E3D_motor_holder_1p0.gcode
2020-03-08 09:58:33,272 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-03-08 09:58:50,899 - DEBUG - [MainThread] UM.Controller.setActiveStage [149]: Setting active stage to PrepareStage
2020-03-08 09:58:50,934 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-08 09:58:50,993 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-08 09:58:50,996 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-08 09:58:51,001 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/plugins/plugins/PrepareStage/PrepareMain.qml:16:5: QML ActionPanelWidget: Binding loop detected for property "width"
2020-03-08 09:58:51,014 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:79: ReferenceError: stop is not defined
2020-03-08 09:58:51,017 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:63: TypeError: Cannot read property of null
2020-03-08 09:58:51,021 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:91: TypeError: Cannot read property of null
2020-03-08 09:58:51,023 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:102: TypeError: Cannot read property of null
2020-03-08 09:58:51,025 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:103: TypeError: Cannot read property of null
2020-03-08 09:58:51,027 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:139: TypeError: Cannot read property of null
2020-03-08 09:58:51,029 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:140: TypeError: Cannot read property of null
2020-03-08 09:58:51,031 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:120: TypeError: Cannot read property of null
2020-03-08 09:58:51,034 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:122: TypeError: Cannot read property of null
2020-03-08 09:58:51,036 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-03-08 09:58:51,038 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:36: TypeError: Cannot read property of null
2020-03-08 09:58:51,041 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:37: TypeError: Cannot read property of null
2020-03-08 09:58:51,043 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:49: TypeError: Cannot read property of null
2020-03-08 09:58:51,045 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:59: TypeError: Cannot read property of null
2020-03-08 09:58:51,047 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:61: TypeError: Cannot read property of null
2020-03-08 09:58:51,049 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:63: TypeError: Cannot read property of null
2020-03-08 09:58:51,051 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ExtruderBox.qml:20: TypeError: Cannot read property of null
2020-03-08 09:58:51,054 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:29: TypeError: Cannot read property of null
2020-03-08 09:58:51,056 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:30: TypeError: Cannot read property of null
2020-03-08 09:58:51,058 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:40: TypeError: Cannot read property of null
2020-03-08 09:58:51,060 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:73: TypeError: Cannot read property of null
2020-03-08 09:58:51,062 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:135: TypeError: Cannot read property of null
2020-03-08 09:58:51,064 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:246: TypeError: Cannot read property of null
2020-03-08 09:58:51,067 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:247: TypeError: Cannot read property of null
2020-03-08 09:58:51,069 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:173: TypeError: Cannot read property of null
2020-03-08 09:58:51,071 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:175: TypeError: Cannot read property of null
2020-03-08 09:58:51,073 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:190: TypeError: Cannot read property of null
2020-03-08 09:58:51,075 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:193: TypeError: Cannot read property of null
2020-03-08 09:58:51,078 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:60: TypeError: Cannot read property of null
2020-03-08 09:58:51,081 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:248: TypeError: Cannot read property of null
2020-03-08 09:58:51,083 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:294: TypeError: Cannot read property of null
2020-03-08 09:58:51,085 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:26: TypeError: Cannot read property of null
2020-03-08 09:58:51,087 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:27: TypeError: Cannot read property of null
2020-03-08 09:58:51,090 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:388: TypeError: Cannot read property of null
2020-03-08 09:58:51,093 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:390: TypeError: Cannot read property of null
2020-03-08 09:58:51,095 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:391: TypeError: Cannot read property of null
2020-03-08 09:58:51,097 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:26: TypeError: Cannot read property of null
2020-03-08 09:58:51,101 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:27: TypeError: Cannot read property of null
2020-03-08 09:58:51,106 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:24: TypeError: Cannot read property of null
2020-03-08 09:58:51,108 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:30: TypeError: Cannot read property of null
2020-03-08 09:58:51,110 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:39: TypeError: Cannot read property of null
2020-03-08 09:58:51,113 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:24: TypeError: Cannot read property of null
2020-03-08 09:58:51,115 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:30: TypeError: Cannot read property of null
2020-03-08 09:58:51,117 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:39: TypeError: Cannot read property of null
2020-03-08 09:58:51,120 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:24: TypeError: Cannot read property of null
2020-03-08 09:58:51,122 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:30: TypeError: Cannot read property of null
2020-03-08 09:58:51,124 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:39: TypeError: Cannot read property of null
2020-03-08 09:58:51,127 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupTooltip.qml:67: TypeError: Cannot read property of null
2020-03-08 09:58:51,130 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupTooltip.qml:69: TypeError: Cannot read property of null
2020-03-08 09:58:51,132 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupTooltip.qml:71: TypeError: Cannot read property of null
2020-03-08 09:58:51,134 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:150: TypeError: Cannot read property of null
2020-03-08 09:58:51,137 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-03-08 09:58:51,139 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:166: TypeError: Cannot read property of null
2020-03-08 09:58:51,141 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:167: TypeError: Cannot read property of null
2020-03-08 09:58:51,144 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:178: TypeError: Cannot read property of null
2020-03-08 09:58:51,146 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:231: TypeError: Cannot read property of null
2020-03-08 09:58:51,148 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:241: TypeError: Cannot read property of null
2020-03-08 09:58:53,449 - INFO - [MainThread] cura.UI.MachineActionManager.addDefaultMachineActions [56]: Default machine actions have been added for machine definition [wanhao_i3plus], do nothing.
2020-03-08 09:58:53,653 - INFO - [MainThread] cura.Settings.GlobalStack.addExtruder [184]: Extruder[wanhao_i3plus_extruder_0 #2] added to [Wanhao Duplicator i3 Plus] at position [0]
2020-03-08 09:58:53,655 - WARNING - [MainThread] cura.Settings.ExtruderManager.registerExtruder [156]: Extruder [wanhao_i3plus_extruder_0 #2] has already been registered on machine [Wanhao Duplicator i3 Plus], not doing anything
2020-03-08 09:58:53,658 - INFO - [MainThread] UM.Logger.info [112]: Initializing Active Machine...
2020-03-08 09:58:53,666 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-08 09:58:53,669 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-08 09:58:53,888 - WARNING - [MainThread] UM.OutputDevice.OutputDeviceManager.removeOutputDevice [179]: Could not find output device with id R2D2 to remove
2020-03-08 09:58:53,890 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-08 09:58:53,895 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [303]: Connection with instance OrangeLeader with url http://192.168.2.162:80/ started
2020-03-08 09:58:53,909 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/SettingsMenu.qml:51: TypeError: Cannot read property 'isEnabled' of undefined
2020-03-08 09:58:53,911 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/SettingsMenu.qml:44: TypeError: Cannot read property 'isEnabled' of undefined
2020-03-08 09:58:53,914 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/MaterialMenu.qml:26: TypeError: Cannot read property 'isEnabled' of undefined
2020-03-08 09:58:53,916 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/MaterialMenu.qml:28: TypeError: Cannot read property 'material' of undefined
2020-03-08 09:58:53,919 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-08 09:58:53,968 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-08 09:58:53,985 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-08 09:58:53,987 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-08 09:58:54,532 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [135]: New error check scheduled.
2020-03-08 09:58:54,973 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-08 09:58:54,983 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [63]: Updating QualityProfilesDropDownMenuModel.
2020-03-08 09:58:55,560 - INFO - [MainThread] cura.Machines.MachineErrorChecker._setResult [187]: Error check finished, result = False, time = 1.0s
2020-03-08 09:58:56,155 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [225]: Starting to slice...
2020-03-08 09:58:56,156 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [243]: Going to slice build plate [0]!
2020-03-08 09:58:56,163 - DEBUG - [MainThread] UM.Backend.Backend._createSocket [213]: Previous socket existed. Closing that first.
2020-03-08 09:58:56,181 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [173]: Socket state changed to Listening
2020-03-08 09:58:56,225 - INFO - [MainThread] UM.Backend.Backend.startEngine [81]: Started engine process: /Applications/Ultimaker Cura 3.app/Contents/MacOS/CuraEngine
2020-03-08 09:58:56,267 - DEBUG - [MainThread] UM.Backend.Backend._backendLog [101]: [Backend] Calling engine with: ['/Applications/Ultimaker Cura 3.app/Contents/MacOS/CuraEngine', 'connect', '127.0.0.1:49674', '']
2020-03-08 09:58:56,393 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-03-08 09:58:56,395 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [177]: Socket state changed to Connected
2020-03-08 09:58:56,398 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] Cura_SteamEngine version 4.5.0
2020-03-08 09:58:56,424 - DEBUG - [MainThread] UM.Backend.Backend._onSocketStateChanged [167]: Backend connected on port 49674
2020-03-08 09:58:56,430 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] Copyright (C) 2019 Ultimaker
2020-03-08 09:58:56,433 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-03-08 09:58:56,435 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] This program is free software: you can redistribute it and/or modify
2020-03-08 09:58:56,437 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] it under the terms of the GNU Affero General Public License as published by
2020-03-08 09:58:56,440 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] the Free Software Foundation, either version 3 of the License, or
2020-03-08 09:58:56,442 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] (at your option) any later version.
2020-03-08 09:58:56,444 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-03-08 09:58:56,447 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] This program is distributed in the hope that it will be useful,
2020-03-08 09:58:56,449 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] but WITHOUT ANY WARRANTY; without even the implied warranty of
2020-03-08 09:58:56,451 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
2020-03-08 09:58:56,453 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] GNU Affero General Public License for more details.
2020-03-08 09:58:56,457 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-03-08 09:58:56,461 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] You should have received a copy of the GNU Affero General Public License
2020-03-08 09:58:56,464 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] along with this program.  If not, see <http://www.gnu.org/licenses/>.
2020-03-08 09:58:56,569 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onStartSliceCompleted [429]: Sending slice message took 0.41319894790649414 seconds
2020-03-08 09:58:56,753 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING]  -s speed_prime_tower="60" -s print_bed_temperature="64" -s machine_steps_per_mm_z="50" -s wall_0_extruder_nr="-1" -s support_interface_skip_height="0.3" -s support_initial_layer_line_distance="2.6666666666666665" -s retract_at_layer_change="False" -s support_bottom_extruder_nr="0" -s minimum_support_area="0.0" -s bridge_wall_coast="100" -s material_bed_temp_wait="True" -s magic_spiralize="False" -s support_bottom_line_width="0.4" -s machine_minimum_feedrate="0.0" -s small_feature_speed_factor="50" -s cool_fan_speed="100.0" -s support_enable="False" -s command_line_settings="0" -s raft_base_line_width="0.8" -s support_skip_some_zags="False" -s speed_print="60" -s machine_depth="200" -s raft_surface_speed="30.0" -s support_roof_enable="True" -s alternate_extra_perimeter="False" -s skin_angles="[ ]" -s cool_min_speed="10" -s jerk_skirt_brim="20" -s raft_interface_acceleration="3000" -s support_skip_zag_per_mm="20" -s roofing_material_flow="100" -s machine_name="Wanhao Duplicator i3 Plus" -s wipe_pause="0" -s wipe_retraction_prime_speed="25" -s support_use_towers="True" -s support_mesh="False" -s support_roof_pattern="concentric" -s travel_avoid_other_parts="True" -s support_interface_material_flow="100" -s infill_overlap="10" -s machine_max_feedrate_z="299792458000" -s cool_fan_full_layer="2" -s support_bottom_line_distance="0.4" -s support_bottom_pattern="concentric" -s speed_topbottom="30.0" -s raft_smoothing="5" -s roofing_line_width="0.4" -s magic_mesh_surface_mode="normal" -s acceleration_prime_tower="3000" -s meshfix_maximum_deviation="0.05" -s speed_travel_layer_0="60.0" -s magic_fuzzy_skin_thickness="0.3" -s meshfix_extensive_stitching="False" -s raft_base_thickness="0.36" -s support_type="buildplate" -s skin_edge_support_layers="0" -s draft_shield_dist="10" -s skin_no_small_gaps_heuristic="False" -s jerk_wall_x="20" -s retraction_min_travel="0.8" -s support_roof_line_width="0.4" -s bottom_thickness="0.8" -s retraction_extra_prime_amount="0" -s material_print_temperature_layer_0="210" -s acceleration_support="3000" -s top_bottom_extruder_nr="-1" -s adhesion_z_offset="0" -s mold_roof_height="0.5" -s support_extruder_nr_layer_0="0" -s meshfix_maximum_travel_resolution="0.8" -s clean_between_layers="False" -s wireframe_top_jump="0.6" -s top_bottom_pattern_0="lines" -s support_conical_min_width="5.0" -s machine_disallowed_areas="[]" -s gantry_height="180" -s material_surface_energy="100" -s jerk_wall="20" -s top_bottom_thickness="0.8" -s brim_line_count="20" -s support_roof_line_distance="0.4" -s jerk_support_interface="20" -s cool_fan_speed_min="100.0" -s wipe_move_distance="20" -s minimum_roof_area="1.0" -s brim_replaces_support="True" -s speed_z_hop="10" -s bridge_skin_material_flow="60" -s bridge_skin_material_flow_2="100" -s infill_sparse_thickness="0.1" -s small_feature_speed_factor_0="50" -s raft_surface_line_width="0.4" -s infill_enable_travel_optimization="False" -s machine_heat_zone_length="16" -s material_end_of_filament_purge_speed="0.5" -s acceleration_support_infill="3000" -s brim_gap="0" -s layer_0_z_overlap="0.15" -s infill_material_flow="100" -s speed_support_roof="40.0" -s wireframe_drag_along="0.6" -s print_temperature="210" -s xy_offset_layer_0="0" -s support_interface_height="1" -s ironing_pattern="zigzag" -s raft_interface_thickness="0.15000000000000002" -s travel_compensate_overlapping_walls_enabled="True" -s support_line_width="0.4" -s ooze_shield_enabled="False" -s support_interface_offset="0.0" -s support_tree_enable="False" -s retraction_hop_after_extruder_switch_height="1" -s bridge_skin_density_2="75" -s speed_wall_x="60.0" -s adhesion_type="skirt" -s default_material_bed_temperature="60" -s machine_max_jerk_z="0.4" -s support_tree_angle="40" -s material_linear_advance_factor_support_interface="0" -s conical_overhang_enabled="False" -s support_pattern="lines" -s extruder_prime_pos_y="0" -s jerk_layer_0="20" -s travel_compensate_overlapping_walls_0_enabled="True" -s sub_div_rad_add="0.4" -s infill_multiplier="1" -s support_infill_rate="15" -s material_anti_ooze_retracted_position="-4" -s jerk_print_layer_0="20" -s wireframe_roof_inset="3" -s cool_fan_speed_0="0" -s support_brim_line_count="20" -s blackmagic="0" -s infill_support_enabled="False" -s raft_interface_speed="22.5" -s travel_avoid_distance="0.625" -s support_bottom_enable="False" -s dual="0" -s cross_infill_pocket_size="4.0" -s wall_line_width_0="0.4" -s support_top_distance="0.1" -s retraction_hop_after_extruder_switch="True" -s material_guid="" -s support_mesh_drop_down="True" -s ironing_line_spacing="0.1" -s mold_enabled="False" -s jerk_travel_layer_0="30.0" -s speed_slowdown_layers="2" -s default_material_print_temperature="210" -s roofing_layer_count="0" -s infill_mesh_order="0" -s support="0" -s spaghetti_infill_enabled="False" -s raft_fan_speed="0" -s machine_max_acceleration_y="9000" -s meshfix="0" -s acceleration_skirt_brim="3000" -s switch_extruder_extra_prime_amount="0" -s wireframe_flow="100" -s jerk_ironing="20" -s roofing_angles="[ ]" -s top_skin_expand_distance="0.8" -s acceleration_ironing="3000" -s prime_tower_flow="100" -s bridge_wall_material_flow="50" -s travel="0" -s switch_extruder_prime_speed="20" -s wall_x_extruder_nr="-1" -s cool_fan_speed_max="100.0" -s wall_overhang_angle="90" -s cool_fan_enabled="True" -s support_roof_height="1.2" -s material="0" -s infill_before_walls="True" -s material_bed_temp_prepend="True" -s wireframe_printspeed_bottom="5" -s skin_preshrink="0.8" -s wall_0_wipe_dist="0.2" -s material_linear_advance_factor_wall_0="0" -s bottom_skin_preshrink="0.8" -s support_xy_distance_overhang="0.2" -s machine_gcode_flavor="RepRap (Marlin/Sprinter)" -s wireframe_roof_fall_down="2" -s wireframe_strategy="compensate" -s machine_endstop_positive_direction_y="False" -s wireframe_top_delay="0" -s spaghetti_max_infill_angle="10" -s acceleration_support_interface="3000" -s speed_layer_0="30.0" -s time="09:58:56" -s machine_buildplate_type="glass" -s raft_base_jerk="20" -s machine_nozzle_id="unknown" -s wipe_brush_pos_x="100" -s acceleration_travel_layer_0="5000.0" -s speed_equalize_flow_max="150" -s bridge_skin_support_threshold="50" -s machine_max_jerk_e="5.0" -s raft_margin="15" -s wireframe_fall_down="0.5" -s support_offset="0" -s material_flow="100" -s cool_min_layer_time="5" -s material_linear_advance_factor="0" -s adhesion_z_offset_extensive_processing="False" -s meshfix_union_all="True" -s support_z_distance="0.1" -s material_linear_advance_factor_skirt_brim="0" -s layer_height_0="0.3" -s bridge_fan_speed_2="0" -s initial_bottom_layers="8" -s support_interface_pattern="concentric" -s bridge_skin_material_flow_3="110" -s bridge_wall_speed="15.0" -s support_bottom_offset="0.0" -s material_linear_advance_factor_infill="0" -s material_print_temp_prepend="True" -s wireframe_printspeed_down="5" -s support_bottom_material_flow="100" -s ironing_enabled="False" -s acceleration_travel="5000" -s acceleration_wall="3000" -s raft_base_acceleration="3000" -s wall_extruder_nr="-1" -s skin_overlap="5" -s print_sequence="all_at_once" -s material_linear_advance_factor_prime_tower="0" -s retraction_prime_speed="25" -s z_seam_type="sharpest_corner" -s spaghetti_inset="0.2" -s speed_support_bottom="40.0" -s material_extrusion_cool_down_speed="0.7" -s wipe_repeat_count="5" -s meshfix_maximum_resolution="0.5" -s gradual_support_infill_step_height="1" -s adhesion_extruder_nr="0" -s mold_width="5" -s jerk_support_infill="20" -s wall_overhang_speed_factor="100" -s raft_acceleration="3000" -s support_bottom_height="1" -s acceleration_support_roof="3000" -s support_roof_offset="0.0" -s speed_roofing="30.0" -s support_bottom_stair_step_height="0.3" -s brim_outside_only="True" -s material_standby_temperature="150" -s raft_surface_layers="2" -s skirt_brim_minimal_length="250" -s travel_compensate_overlapping_walls_x_enabled="True" -s wireframe_flow_connection="100" -s machine_nozzle_expansion_angle="45" -s adaptive_layer_height_enabled="False" -s spaghetti_infill_extra_volume="0" -s support_connect_zigzags="True" -s jerk_support_roof="20" -s machine_extruder_count="1" -s wireframe_flow_flat="100" -s speed_print_layer_0="30.0" -s raft_jerk="20" -s prime_tower_min_volume="6" -s material_bed_temperature="64" -s draft_shield_height="10" -s retraction_combing_max_distance="0" -s z_seam_x="100.0" -s infill_line_distance="4.0" -s minimum_bottom_area="1.0" -s xy_offset="0" -s extruders_enabled_count="1" -s machine_end_gcode="" -s machine_center_is_zero="False" -s jerk_print="20" -s magic_fuzzy_skin_point_dist="0.8" -s bridge_skin_speed_3="15.0" -s spaghetti_flow="20" -s filter_out_tiny_gaps="True" -s skin_outline_count="1" -s jerk_prime_tower="20" -s wireframe_nozzle_clearance="1" -s speed_infill="60" -s material_linear_advance_factor_topbottom="0" -s wireframe_enabled="False" -s skirt_line_count="4" -s retraction_count_max="90" -s gradual_support_infill_steps="0" -s connect_infill_polygons="False" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s connect_skin_polygons="False" -s infill_pattern="grid" -s infill_wipe_dist="0.1" -s bottom_skin_expand_distance="0.8" -s retraction_hop="1" -s jerk_wall_0="20" -s support_roof_extruder_nr="0" -s acceleration_enabled="False" -s machine_show_variants="False" -s gradual_infill_steps="0" -s jerk_infill="20" -s wall_0_inset="0" -s relative_extrusion="False" -s wipe_retraction_amount="6.5" -s material_break_temperature="50" -s machine_steps_per_mm_y="50" -s wireframe_printspeed="5" -s support_tree_branch_diameter="2" -s wipe_hop_amount="1" -s support_join_distance="2.0" -s speed_equalize_flow_enabled="False" -s wall_line_width="0.4" -s skin_material_flow="100" -s support_bottom_density="100" -s flow_rate_extrusion_offset_factor="100" -s carve_multiple_volumes="False" -s acceleration_wall_x="3000" -s acceleration_roofing="3000" -s retraction_hop_enabled="False" -s switch_extruder_retraction_speed="20" -s top_skin_preshrink="0.8" -s initial_layer_line_width_factor="100.0" -s machine_start_gcode="" -s material_diameter="2.85" -s flow_rate_max_extrusion_offset="0" -s platform_adhesion="0" -s support_bottom_stair_step_width="5.0" -s machine_acceleration="4000" -s cool_min_layer_time_fan_speed_max="10" -s prime_blob_enable="False" -s meshfix_keep_open_polygons="False" -s machine_extruders_share_heater="False" -s speed_wall_0="30.0" -s cool_lift_head="False" -s material_break_speed="25" -s machine_max_acceleration_z="100" -s support_wall_count="0" -s skin_edge_support_thickness="0" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s wall_min_flow_retract="False" -s minimum_polygon_circumference="1.0" -s wipe_hop_speed="10" -s date="08-03-2020" -s speed_support="60" -s ironing_inset="0.2" -s wireframe_roof_outer_delay="0.2" -s bridge_fan_speed_3="0" -s z_seam_y="200" -s support_interface_enable="False" -s bridge_skin_density_3="80" -s shell="0" -s support_infill_angles="[ ]" -s infill_extruder_nr="-1" -s infill_sparse_density="20" -s wall_thickness="0.8" -s material_crystallinity="False" -s machine_steps_per_mm_e="1600" -s support_bottom_distance="0" -s prime_tower_line_width="0.4" -s spaghetti_infill_stepped="True" -s machine_max_feedrate_e="299792458000" -s infill_line_width="0.4" -s magic_fuzzy_skin_outside_only="False" -s jerk_support_bottom="20" -s material_print_temp_wait="True" -s support_roof_angles="[ ]" -s support_interface_angles="[ ]" -s small_feature_max_length="0.0" -s skin_overlap_mm="0.02" -s material_flush_purge_length="60" -s raft_interface_line_spacing="1.0" -s machine_nozzle_heat_up_speed="2.0" -s adaptive_layer_height_threshold="0.2" -s top_thickness="0.8" -s bridge_skin_density="100" -s wall_min_flow="0" -s ironing_flow="10.0" -s support_tree_collision_resolution="0.2" -s raft_base_fan_speed="0" -s bridge_settings_enabled="False" -s support_roof_material_flow="100" -s machine_max_feedrate_y="299792458000" -s alternate_carve_order="True" -s wipe_retraction_enable="True" -s day="Sun" -s support_tree_branch_diameter_angle="5" -s experimental="0" -s prime_tower_position_x="195.6" -s bridge_wall_min_length="5" -s machine_steps_per_mm_x="50" -s jerk_topbottom="20" -s remove_empty_first_layers="True" -s prime_tower_size="20" -s jerk_roofing="20" -s travel_speed="120" -s speed="0" -s cutting_mesh="False" -s machine_max_jerk_xy="20.0" -s material_adhesion_tendency="10" -s extruder_prime_pos_abs="False" -s nozzle_disallowed_areas="[]" -s support_interface_extruder_nr="0" -s support_tower_maximum_supported_diameter="3.0" -s wipe_retraction_extra_prime_amount="0" -s material_break_preparation_retracted_position="-16" -s infill_mesh="False" -s layer_height="0.1" -s support_brim_width="8.0" -s machine_nozzle_head_distance="3" -s prime_tower_brim_enable="False" -s gradual_infill_step_height="1.5" -s outer_inset_first="False" -s support_tower_roof_angle="65" -s extruder_prime_pos_z="0" -s skirt_gap="3" -s machine_width="200" -s machine_max_feedrate_x="299792458000" -s anti_overhang_mesh="False" -s travel_retract_before_outer_wall="False" -s machine_height="180" -s retraction_extrusion_window="6.5" -s support_fan_enable="False" -s coasting_enable="False" -s support_interface_density="100" -s support_material_flow="100" -s bridge_fan_speed="100" -s support_infill_extruder_nr="0" -s infill="0" -s coasting_speed="90" -s jerk_travel="30" -s ooze_shield_angle="60" -s machine_endstop_positive_direction_x="False" -s material_final_print_temperature="195" -s acceleration_print="3000" -s material_linear_advance_factor_wall_x="0" -s speed_support_infill="60" -s max_extrusion_before_wipe="10" -s raft_base_line_spacing="1.6" -s retraction_enable="True" -s support_line_distance="2.6666666666666665" -s material_print_temperature="210" -s mold_angle="40" -s raft_speed="30.0" -s retraction_amount="6.5" -s wipe_retraction_speed="25" -s support_tower_diameter="3.0" -s material_break_retracted_position="-50" -s material_initial_print_temperature="200" -s resolution="0" -s wireframe_printspeed_up="5" -s support_infill_sparse_thickness="0.1" -s material_bed_temperature_layer_0="64" -s adaptive_layer_height_variation="0.1" -s cross_infill_density_image="" -s skirt_brim_speed="30.0" -s machine_nozzle_temp_enabled="True" -s material_maximum_park_duration="300" -s switch_extruder_retraction_amount="16" -s wall_line_width_x="0.4" -s jerk_support="20" -s bridge_skin_speed_2="15.0" -s raft_surface_fan_speed="0" -s max_skin_angle_for_expansion="90" -s raft_interface_line_width="0.8" -s infill_offset_x="0" -s magic_fuzzy_skin_enabled="False" -s jerk_enabled="False" -s support_zag_skip_count="8" -s machine_filament_park_distance="16" -s fill_outline_gaps="False" -s z_seam_position="back" -s infill_randomize_start_location="False" -s mesh_position_y="0" -s machine_max_acceleration_x="9000" -s speed_support_interface="40.0" -s magic_fuzzy_skin_point_density="1.25" -s wall_line_count="2" -s wipe_retraction_retract_speed="25" -s multiple_mesh_overlap="0.15" -s z_seam_corner="z_seam_corner_inner" -s machine_head_with_fans_polygon="[[-20, 10], [10, 10], [10, -10], [10, -10]]" -s wall_material_flow="100" -s material_flow_layer_0="100" -s retraction_combing="all" -s travel_avoid_supports="False" -s acceleration_infill="3000" -s machine_nozzle_size="0.4" -s raft_interface_jerk="20" -s material_shrinkage_percentage="0" -s material_break_preparation_temperature="210" -s bridge_skin_speed="15.0" -s skirt_brim_material_flow="100" -s retraction_speed="25" -s wall_0_material_flow="100" -s material_no_load_move_factor="0.940860215" -s raft_surface_line_spacing="0.4" -s material_anti_ooze_retraction_speed="5" -s support_conical_enabled="False" -s cross_support_density_image="" -s z_seam_relative="False" -s wireframe_height="3" -s smooth_spiralized_contours="True" -s wireframe_straight_before_down="20" -s infill_angles="[ ]" -s minimum_interface_area="1.0" -s draft_shield_enabled="False" -s machine_nozzle_cool_down_speed="2.0" -s speed_ironing="20.0" -s machine_max_acceleration_e="10000" -s limit_support_retractions="True" -s material_linear_advance_factor_support="0" -s support_tree_branch_distance="1" -s wall_x_material_flow="100" -s min_skin_width_for_expansion="4.898587196589413e-17" -s prime_tower_position_y="175.6" -s mesh_position_x="0" -s expand_skins_expand_distance="0.8" -s roofing_pattern="lines" -s small_hole_max_size="0" -s acceleration_wall_0="3000" -s support_interface_line_width="0.4" -s support_bottom_angles="[ ]" -s infill_wall_line_count="0" -s support_supported_skin_fan_speed="100" -s draft_shield_height_limitation="full" -s wireframe_printspeed_flat="5" -s skin_line_width="0.4" -s machine_firmware_retract="False" -s switch_extruder_retraction_speeds="20" -s top_layers="8" -s initial_extruder_nr="0" -s meshfix_union_all_remove_holes="False" -s support_brim_enable="False" -s cool_fan_full_at_height="0.3" -s machine_heated_build_volume="False" -s support_conical_angle="30" -s brim_width="8.0" -s raft_interface_fan_speed="0" -s fill_perimeter_gaps="everywhere" -s prime_tower_wipe_enabled="True" -s spaghetti_max_height="2.0" -s support_roof_density="100" -s acceleration_topbottom="3000" -s machine_settings="0" -s ironing_only_highest_layer="False" -s wireframe_flat_delay="0.1" -s bridge_sparse_infill_max_density="0" -s wireframe_bottom_delay="0" -s line_width="0.4" -s optimize_wall_printing_order="False" -s zig_zaggify_support="False" -s wipe_hop_enable="False" -s acceleration_print_layer_0="3000" -s speed_travel="120" -s support_angle="70" -s raft_base_speed="22.5" -s machine_shape="rectangular" -s machine_heated_bed="True" -s machine_use_extruder_offset_to_offset_coords="True" -s wireframe_roof_drag_along="0.8" -s acceleration_support_bottom="3000" -s material_end_of_filament_purge_length="20" -s material_break_preparation_speed="2" -s acceleration_layer_0="3000" -s support_xy_overrides_z="z_overrides_xy" -s min_infill_area="0" -s machine_nozzle_tip_outer_diameter="1" -s cooling="0" -s raft_airgap="0.3" -s material_flush_purge_speed="0.5" -s slicing_tolerance="middle" -s retraction_retract_speed="25" -s layer_start_y="0.0" -s build_volume_temperature="28" -s extruder_prime_pos_x="0" -s infill_overlap_mm="0.04" -s mesh_position_z="0" -s conical_overhang_angle="50" -s zig_zaggify_infill="False" -s raft_surface_acceleration="3000" -s wireframe_up_half_speed="0.3" -s bridge_enable_more_layers="True" -s raft_surface_thickness="0.1" -s prime_tower_enable="False" -s material_linear_advance_factor_wall="0" -s coasting_min_volume="0.8" -s support_xy_distance="0.7" -s speed_wall="30.0" -s infill_support_angle="40" -s adaptive_layer_height_variation_step="0.01" -s raft_surface_jerk="20" -s layer_start_x="0.0" -s machine_min_cool_heat_time_window="50.0" -s ooze_shield_dist="2" -s material_flow_dependent_temperature="False" -s bottom_layers="8" -s infill_offset_y="0" -s machine_feeder_wheel_diameter="10.0" -s retraction_hop_only_when_collides="False" -s roofing_extruder_nr="-1" -s skirt_brim_line_width="0.4" -s center_object="False" -s top_bottom_pattern="lines" -s support_extruder_nr="0" -s coasting_volume="0.064" -s machine_endstop_positive_direction_z="True" -e0 -s speed_prime_tower="60" -s machine_steps_per_mm_z="50" -s jerk_support_roof="20" -s support_interface_skip_height="0.3" -s support_interface_offset="0.0" -s support_initial_layer_line_distance="2.6666666666666665" -s retract_at_layer_change="False" -s minimum_support_area="0.0" -s bridge_wall_coast="100" -s support_bottom_line_width="0.4" -s machine_nozzle_offset_x="0" -s small_feature_speed_factor="50" -s switch_extruder_prime_speed="20" -s cool_fan_speed="80" -s command_line_settings="0" -s experimental="0" -s raft_base_line_width="0.8" -s support_skip_some_zags="False" -s machine_nozzle_offset_y="0" -s speed_print="60" -s raft_surface_speed="30.0" -s support_roof_enable="True" -s alternate_extra_perimeter="False" -s skin_angles="[ ]" -s cool_min_speed="10" -s machine_extruder_end_pos_x="0" -s jerk_skirt_brim="20" -s raft_interface_acceleration="3000" -s material_break_preparation_retracted_position="-16" -s support_skip_zag_per_mm="20" -s roofing_material_flow="100" -s skin_overlap="5" -s wipe_pause="0" -s wipe_retraction_prime_speed="65" -s support_use_towers="True" -s support_roof_pattern="concentric" -s travel_avoid_other_parts="True" -s cool_fan_full_layer="2" -s support_bottom_line_distance="0.4" -s material_linear_advance_factor_topbottom="0" -s support_bottom_pattern="concentric" -s speed_topbottom="30.0" -s raft_smoothing="5" -s roofing_line_width="0.4" -s magic_mesh_surface_mode="normal" -s acceleration_prime_tower="3000" -s meshfix_maximum_deviation="0.05" -s speed_travel_layer_0="30.0" -s skin_edge_support_layers="0" -s skin_no_small_gaps_heuristic="False" -s wipe_hop_enable="False" -s zig_zaggify_support="False" -s bridge_fan_speed="100" -s support_material_flow="100" -s retraction_extra_prime_amount="0" -s support_supported_skin_fan_speed="100" -s infill_wall_line_count="0" -s acceleration_support_interface="3000" -s spaghetti_max_infill_angle="10" -s resolution="0" -s support_interface_pattern="concentric" -s bridge_skin_material_flow_3="110" -s initial_bottom_layers="6" -s bridge_fan_speed_2="0" -s mold_roof_height="0.5" -s meshfix_maximum_travel_resolution="0.8" -s extruder_prime_pos_x="0" -s layer_start_y="0.0" -s top_bottom_pattern_0="lines" -s support_conical_min_width="5.0" -s cool_fan_speed_min="80" -s wipe_move_distance="20" -s brim_replaces_support="True" -s extruder_prime_pos_z="0" -s support_tower_roof_angle="65" -s speed_z_hop="10" -s skirt_brim_speed="12" -s switch_extruder_retraction_amount="16" -s material_maximum_park_duration="300" -s machine_nozzle_temp_enabled="True" -s top_bottom_thickness="0.8" -s raft_base_speed="22.5" -s support_angle="70" -s machine_steps_per_mm_e="1600" -s material_crystallinity="False" -s support_bottom_distance="0" -s wall_thickness="0.8" -s material_flush_purge_length="60" -s machine_nozzle_heat_up_speed="2.0" -s raft_interface_line_spacing="1.0" -s support_bottom_material_flow="100" -s acceleration_travel="5000" -s acceleration_wall="3000" -s ironing_enabled="False" -s raft_surface_line_width="0.4" -s acceleration_support_infill="3000" -s brim_gap="0" -s support_line_width="0.4" -s jerk_prime_tower="20" -s skin_outline_count="1" -s support_interface_height="1" -s support_conical_enabled="False" -s material_anti_ooze_retraction_speed="5" -s z_seam_corner="z_seam_corner_inner" -s wipe_retraction_speed="65" -s retraction_amount="2.5" -s raft_interface_thickness="0.15000000000000002" -s jerk_wall_0="20" -s retraction_hop="1" -s infill_sparse_thickness="0.1" -s extruder_prime_pos_abs="False" -s material_adhesion_tendency="0" -s support_tree_angle="40" -s conical_overhang_enabled="False" -s extruder_prime_pos_y="0" -s travel_compensate_overlapping_walls_0_enabled="True" -s infill_multiplier="1" -s support_infill_rate="15" -s jerk_wall_x="20" -s cool_fan_speed_0="0" -s support_brim_line_count="20" -s blackmagic="0" -s infill_support_enabled="False" -s raft_interface_speed="22.5" -s travel_avoid_distance="0.625" -s support_bottom_enable="False" -s dual="0" -s cross_infill_pocket_size="2.0" -s wall_line_width_0="0.4" -s support_top_distance="0.1" -s retraction_hop_after_extruder_switch="True" -s support_bottom_offset="0.0" -s bridge_wall_speed="15.0" -s meshfix_union_all="True" -s support_z_distance="0.1" -s material_guid="0ff92885-617b-4144-a03c-9989872454bc" -s ironing_line_spacing="0.1" -s mold_enabled="False" -s jerk_travel_layer_0="30.0" -s support_connect_zigzags="True" -s spaghetti_infill_extra_volume="0" -s spaghetti_flow="20" -s magic_fuzzy_skin_point_dist="0.8" -s filter_out_tiny_gaps="True" -s bridge_skin_speed_3="15.0" -s default_material_print_temperature="200" -s roofing_layer_count="0" -s mold_angle="40" -s raft_speed="30.0" -s raft_fan_speed="0" -s material_anti_ooze_retracted_position="-4" -s jerk_print_layer_0="20" -s meshfix="0" -s acceleration_skirt_brim="3000" -s jerk_layer_0="20" -s switch_extruder_extra_prime_amount="0" -s jerk_ironing="20" -s roofing_angles="[ ]" -s top_skin_expand_distance="1.6" -s acceleration_ironing="3000" -s prime_tower_flow="100" -s support_tree_branch_diameter="2" -s machine_steps_per_mm_y="50" -s bridge_wall_material_flow="50" -s wall_min_flow_retract="False" -s connect_infill_polygons="False" -s machine_extruder_start_code="" -s travel="0" -s xy_offset_layer_0="0" -s cool_fan_speed_max="80" -s wall_overhang_angle="90" -s cool_fan_enabled="True" -s support_infill_sparse_thickness="0.1" -s support_roof_height="1.2" -s clean_between_layers="False" -s skin_preshrink="1.6" -s raft_surface_acceleration="3000" -s wall_0_wipe_dist="0.2" -s material_linear_advance_factor_wall_0="0" -s sub_div_rad_add="0.4" -s bottom_skin_preshrink="1.6" -s support_xy_distance_overhang="0.2" -s infill_enable_travel_optimization="False" -s speed_layer_0="12" -s speed_wall_x="60.0" -s raft_base_jerk="20" -s magic_fuzzy_skin_enabled="False" -s prime_tower_min_volume="6" -s machine_nozzle_id="unknown" -s wipe_brush_pos_x="100" -s acceleration_travel_layer_0="5000.0" -s speed_equalize_flow_max="150" -s bridge_skin_support_threshold="50" -s material_end_of_filament_purge_speed="0.5" -s raft_margin="15" -s support_offset="0" -s material_flow="100" -s material_linear_advance_factor_wall_x="0" -s acceleration_print="3000" -s multiple_mesh_overlap="0.15" -s wipe_retraction_retract_speed="65" -s cool_min_layer_time="5" -s material_linear_advance_factor="0" -s machine_extruder_start_pos_abs="False" -s acceleration_support="3000" -s support="0" -s spaghetti_infill_enabled="False" -s retraction_hop_after_extruder_switch_height="1" -s machine_extruder_end_pos_abs="False" -s material_linear_advance_factor_infill="0" -s minimum_roof_area="1.0" -s machine_extruder_cooling_fan_number="0" -s speed_support_bottom="40.0" -s material_extrusion_cool_down_speed="0.7" -s wipe_repeat_count="5" -s meshfix_maximum_resolution="0.5" -s gradual_support_infill_step_height="1" -s raft_acceleration="3000" -s support_bottom_height="1" -s acceleration_support_roof="3000" -s support_roof_offset="0.0" -s wall_material_flow="100" -s material_flow_layer_0="100" -s meshfix_union_all_remove_holes="False" -s skin_edge_support_thickness="0" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s support_wall_count="0" -s material_diameter="1.75" -s travel_compensate_overlapping_walls_x_enabled="True" -s speed_print_layer_0="12" -s raft_jerk="20" -s xy_offset="0" -s speed_infill="60" -s cool_lift_head="False" -s speed_wall_0="30.0" -s outer_inset_first="False" -s gradual_infill_step_height="1.5" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s support_join_distance="2.0" -s wipe_hop_amount="1" -s wipe_retraction_enable="True" -s infill_wipe_dist="0.1" -s connect_skin_polygons="False" -s infill_pattern="concentric" -s line_width="0.4" -s optimize_wall_printing_order="False" -s wipe_retraction_amount="2.5" -s material_break_temperature="50" -s top_skin_preshrink="1.6" -s acceleration_roofing="3000" -s retraction_hop_enabled="False" -s switch_extruder_retraction_speed="20" -s support_bottom_stair_step_width="5.0" -s platform_adhesion="0" -s machine_steps_per_mm_x="50" -s z_seam_x="100.0" -s retraction_combing_max_distance="0" -s speed_equalize_flow_enabled="False" -s wall_line_width="0.4" -s skin_material_flow="100" -s support_bottom_density="100" -s acceleration_wall_x="3000" -s machine_nozzle_cool_down_speed="2.0" -s skirt_brim_material_flow="100" -s bridge_skin_speed="15.0" -s cool_min_layer_time_fan_speed_max="10" -s prime_blob_enable="False" -s meshfix_keep_open_polygons="False" -s support_tower_maximum_supported_diameter="3.0" -s material_break_speed="25" -s speed_support="60" -s ironing_inset="0.2" -s bridge_fan_speed_3="0" -s jerk_print="20" -s bottom_skin_expand_distance="1.6" -s z_seam_y="200" -s speed_support_roof="40.0" -s support_bottom_angles="[ ]" -s support_interface_line_width="0.4" -s support_interface_enable="False" -s bridge_skin_density_3="80" -s shell="0" -s support_infill_angles="[ ]" -s gradual_support_infill_steps="0" -s infill_sparse_density="20" -s jerk_support_interface="20" -s skirt_brim_minimal_length="250" -s raft_surface_layers="2" -s brim_line_count="20" -s support_roof_line_distance="0.4" -s prime_tower_line_width="0.4" -s infill_line_width="0.4" -s magic_fuzzy_skin_outside_only="False" -s roofing_pattern="lines" -s support_interface_material_flow="100" -s infill_overlap="14" -s extruder_nr="0" -s jerk_support_bottom="20" -s support_roof_angles="[ ]" -s bottom_thickness="0.8" -s support_interface_angles="[ ]" -s small_feature_max_length="0.0" -s skin_overlap_mm="0.02" -s retraction_retract_speed="65" -s zig_zaggify_infill="False" -s infill_overlap_mm="0" -s mesh_position_z="0" -s conical_overhang_angle="50" -s bridge_skin_density="100" -s wall_min_flow="0" -s ironing_flow="10.0" -s support_tree_branch_diameter_angle="5" -s jerk_roofing="20" -s speed="0" -s wipe_retraction_extra_prime_amount="0" -s skirt_line_count="4" -s retraction_count_max="90" -s support_xy_overrides_z="z_overrides_xy" -s machine_nozzle_tip_outer_diameter="1" -s min_infill_area="0" -s magic_fuzzy_skin_thickness="0.3" -s meshfix_extensive_stitching="False" -s material_flow_dependent_temperature="False" -s bottom_layers="6" -s infill_offset_y="0" -s support_brim_width="8.0" -s machine_nozzle_head_distance="3" -s cross_support_density_image="" -s z_seam_relative="False" -s slicing_tolerance="exclusive" -s machine_extruder_end_pos_y="0" -s skirt_gap="3" -s infill_material_flow="100" -s material_break_preparation_temperature="220" -s jerk_travel="30" -s material_linear_advance_factor_skirt_brim="0" -s machine_endstop_positive_direction_x="False" -s material_final_print_temperature="205" -s wall_line_count="4" -s magic_fuzzy_skin_point_density="1.25" -s infill_randomize_start_location="False" -s mesh_position_y="0" -s bridge_skin_material_flow_2="100" -s speed_support_interface="40.0" -s bridge_skin_density_2="75" -s machine_extruder_start_pos_x="0" -s support_tower_diameter="3.0" -s machine_min_cool_heat_time_window="50.0" -s layer_start_x="0.0" -s wall_line_width_x="0.4" -s jerk_support="20" -s bridge_skin_speed_2="15.0" -s top_thickness="0.8" -s material="0" -s infill_before_walls="True" -s small_hole_max_size="0" -s acceleration_wall_0="3000" -s max_skin_angle_for_expansion="90" -s material_surface_energy="100" -s raft_interface_line_width="0.8" -s infill_offset_x="0" -s support_zag_skip_count="8" -s machine_filament_park_distance="16" -s fill_outline_gaps="False" -s cross_infill_density_image="" -s raft_surface_fan_speed="0" -s spaghetti_infill_stepped="True" -s machine_endstop_positive_direction_y="False" -s minimum_bottom_area="1.0" -s infill_line_distance="2.0" -s z_seam_position="back" -s top_layers="6" -s material_linear_advance_factor_prime_tower="0" -s retraction_prime_speed="65" -s z_seam_type="random" -s material_no_load_move_factor="0.940860215" -s raft_surface_line_spacing="0.4" -s infill="0" -s coasting_speed="90" -s support_roof_material_flow="100" -s travel_avoid_supports="False" -s acceleration_infill="3000" -s machine_nozzle_size="0.4" -s raft_interface_jerk="20" -s material_shrinkage_percentage="0" -s retraction_speed="65" -s wall_0_material_flow="100" -s support_tree_branch_distance="1" -s wall_x_material_flow="100" -s min_skin_width_for_expansion="3.67394039744206e-17" -s mesh_position_x="0" -s expand_skins_expand_distance="1.6" -s material_linear_advance_factor_support="0" -s speed_ironing="20.0" -s limit_support_retractions="True" -s support_roof_line_width="0.4" -s jerk_wall="20" -s raft_base_acceleration="3000" -s retraction_extrusion_window="2.5" -s machine_extruder_start_pos_y="0" -s support_fan_enable="False" -s small_feature_speed_factor_0="50" -s coasting_volume="0.064" -s machine_endstop_positive_direction_z="True" -s skirt_brim_line_width="0.4" -s center_object="False" -s top_bottom_pattern="lines" -s mold_width="5" -s jerk_support_infill="20" -s wall_overhang_speed_factor="100" -s infill_support_angle="40" -s raft_surface_jerk="20" -s bridge_sparse_infill_max_density="0" -s speed_roofing="30.0" -s support_bottom_stair_step_height="0.3" -s brim_outside_only="True" -s material_standby_temperature="175" -s support_xy_distance="0.7" -s speed_wall="30.0" -s travel_compensate_overlapping_walls_enabled="True" -s acceleration_topbottom="3000" -s machine_settings="0" -s ironing_only_highest_layer="False" -s support_brim_enable="False" -s cool_fan_full_at_height="0.3" -s support_conical_angle="30" -s wall_0_inset="0" -s speed_support_infill="60" -s raft_base_line_spacing="1.6" -s max_extrusion_before_wipe="10" -s brim_width="8.0" -s layer_0_z_overlap="0.15" -s ironing_pattern="zigzag" -s speed_travel="150" -s jerk_topbottom="20" -s raft_interface_fan_speed="0" -s fill_perimeter_gaps="everywhere" -s prime_tower_wipe_enabled="True" -s spaghetti_max_height="2.0" -s support_roof_density="100" -s acceleration_print_layer_0="3000" -s acceleration_support_bottom="3000" -s material_end_of_filament_purge_length="20" -s material_break_preparation_speed="2" -s retraction_min_travel="0.8" -s acceleration_layer_0="3000" -s support_pattern="lines" -s support_line_distance="2.6666666666666665" -s retraction_enable="True" -s support_interface_density="100" -s coasting_enable="False" -s machine_feeder_wheel_diameter="10.0" -s retraction_hop_only_when_collides="False" -s material_break_retracted_position="-50" -s material_initial_print_temperature="210" -s material_print_temperature_layer_0="220" -s support_tree_collision_resolution="0.2" -s raft_base_fan_speed="0" -s machine_heat_zone_length="16" -s gradual_infill_steps="0" -s raft_airgap="0.3" -s material_flush_purge_speed="0.5" -s infill_angles="[ ]" -s minimum_interface_area="1.0" -s machine_extruder_end_code="" -s skin_line_width="0.4" -s raft_surface_thickness="0.1" -s material_linear_advance_factor_wall="0" -s coasting_min_volume="0.8" -s initial_layer_line_width_factor="100.0" -s bridge_enable_more_layers="True" -s jerk_infill="20" -s switch_extruder_retraction_speeds="20" -s spaghetti_inset="0.2" -s material_linear_advance_factor_support_interface="0" -s bridge_skin_material_flow="60" -s material_print_temperature="220" -s wipe_hop_speed="10" -s cooling="0" -s raft_base_thickness="0.36" -g -e0 -l "0" -s extruder_nr="0"
2020-03-08 09:59:02,107 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 217 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-08 09:59:02,303 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-08 09:59:02,306 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-08 09:59:02,321 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [663]: Slicing took 6.164781093597412 seconds
2020-03-08 09:59:02,321 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [664]: Number of models per buildplate: {0: 1}
2020-03-08 09:59:02,321 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [678]: See if there is more to slice...
2020-03-08 09:59:02,535 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [181]: Socket state changed to Closing
2020-03-08 09:59:02,539 - DEBUG - [MainThread] UM.Backend.Backend._onSocketError [203]: Socket debug: Arcus Error (13): Closing socket because other side requested close.
2020-03-08 09:59:02,542 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [183]: Socket state changed to Closed
2020-03-08 09:59:02,542 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onBackendQuit [829]: Backend quit with return code 0. Resetting process and socket.
2020-03-08 09:59:04,273 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-03-08 09:59:06,899 - DEBUG - [MainThread] LinearAdvanceSettingPlugin.LinearAdvanceSettingPlugin._filterGcode [109]: No used extruders specify a linear advance factor
2020-03-08 09:59:07,100 - ERROR - [MainThread] UM.Logger.logException [98]: Exception: Unable to write to file WDI3P_motor_holder_1p0: 'NoneType' object has no attribute 'state'
2020-03-08 09:59:07,103 - ERROR - [MainThread] UM.Logger.logException [102]: Traceback (most recent call last):
2020-03-08 09:59:07,105 - ERROR - [MainThread] UM.Logger.logException [102]:   File "/Users/ultimaker/build/4.5/build/inst/lib/python3.5/site-packages/UM/Qt/Bindings/OutputDeviceManagerProxy.py", line 135, in _writeToDevice
2020-03-08 09:59:07,107 - ERROR - [MainThread] UM.Logger.logException [102]:   File "/Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/OctoPrintOutputDevice.py", line 367, in requestWrite
2020-03-08 09:59:07,109 - ERROR - [MainThread] UM.Logger.logException [102]:     if self.activePrinter.state == "offline" and "psucontrol" in self._plugin_data and use_psu_control:
2020-03-08 09:59:07,111 - ERROR - [MainThread] UM.Logger.logException [102]: AttributeError: 'NoneType' object has no attribute 'state'
2020-03-08 09:59:07,114 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._processRequest [308]: Request [4661ca06bd3b41019aacb75d9bd9ec94] started
2020-03-08 09:59:07,116 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-08 09:59:07,303 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestFinished [369]: Request [4661ca06bd3b41019aacb75d9bd9ec94] finished.
2020-03-08 09:59:07,306 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-08 09:59:07,306 - INFO - [MainThread] SliceInfoPlugin.SliceInfo._onRequestFinished [275]: SliceInfo sent successfully
2020-03-08 09:59:16,206 - DEBUG - [MainThread] LinearAdvanceSettingPlugin.LinearAdvanceSettingPlugin._filterGcode [109]: No used extruders specify a linear advance factor
2020-03-08 09:59:16,399 - ERROR - [MainThread] UM.Logger.logException [98]: Exception: Unable to write to file WDI3P_motor_holder_1p0: 'NoneType' object has no attribute 'state'
2020-03-08 09:59:16,402 - ERROR - [MainThread] UM.Logger.logException [102]: Traceback (most recent call last):
2020-03-08 09:59:16,404 - ERROR - [MainThread] UM.Logger.logException [102]:   File "/Users/ultimaker/build/4.5/build/inst/lib/python3.5/site-packages/UM/Qt/Bindings/OutputDeviceManagerProxy.py", line 135, in _writeToDevice
2020-03-08 09:59:16,406 - ERROR - [MainThread] UM.Logger.logException [102]:   File "/Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/OctoPrintOutputDevice.py", line 367, in requestWrite
2020-03-08 09:59:16,408 - ERROR - [MainThread] UM.Logger.logException [102]:     if self.activePrinter.state == "offline" and "psucontrol" in self._plugin_data and use_psu_control:
2020-03-08 09:59:16,410 - ERROR - [MainThread] UM.Logger.logException [102]: AttributeError: 'NoneType' object has no attribute 'state'
2020-03-08 09:59:16,412 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._processRequest [308]: Request [4a2bdc0177f944afab0df781b9dac199] started
2020-03-08 09:59:16,414 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-08 09:59:16,763 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestFinished [369]: Request [4a2bdc0177f944afab0df781b9dac199] finished.
2020-03-08 09:59:16,766 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-08 09:59:16,767 - INFO - [MainThread] SliceInfoPlugin.SliceInfo._onRequestFinished [275]: SliceInfo sent successfully
2020-03-08 09:59:19,728 - DEBUG - [MainThread] LinearAdvanceSettingPlugin.LinearAdvanceSettingPlugin._filterGcode [109]: No used extruders specify a linear advance factor
2020-03-08 09:59:19,936 - ERROR - [MainThread] UM.Logger.logException [98]: Exception: Unable to write to file WDI3P_motor_holder_1p0: 'NoneType' object has no attribute 'state'
2020-03-08 09:59:19,938 - ERROR - [MainThread] UM.Logger.logException [102]: Traceback (most recent call last):
2020-03-08 09:59:19,941 - ERROR - [MainThread] UM.Logger.logException [102]:   File "/Users/ultimaker/build/4.5/build/inst/lib/python3.5/site-packages/UM/Qt/Bindings/OutputDeviceManagerProxy.py", line 135, in _writeToDevice
2020-03-08 09:59:19,943 - ERROR - [MainThread] UM.Logger.logException [102]:   File "/Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/OctoPrintOutputDevice.py", line 367, in requestWrite
2020-03-08 09:59:19,945 - ERROR - [MainThread] UM.Logger.logException [102]:     if self.activePrinter.state == "offline" and "psucontrol" in self._plugin_data and use_psu_control:
2020-03-08 09:59:19,948 - ERROR - [MainThread] UM.Logger.logException [102]: AttributeError: 'NoneType' object has no attribute 'state'
2020-03-08 09:59:19,950 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._processRequest [308]: Request [5aa2eff007a544b38564a8aab5d57c25] started
2020-03-08 09:59:19,952 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-08 09:59:20,185 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestFinished [369]: Request [5aa2eff007a544b38564a8aab5d57c25] finished.
2020-03-08 09:59:20,189 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-08 09:59:20,189 - INFO - [MainThread] SliceInfoPlugin.SliceInfo._onRequestFinished [275]: SliceInfo sent successfully
2020-03-08 09:59:26,356 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.disconnect [315]: Connection with instance OrangeLeader with url http://192.168.2.162:80/ stopped
2020-03-08 09:59:26,370 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-08 09:59:26,372 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device OrangeLeader already added
2020-03-08 09:59:26,373 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [303]: Connection with instance OrangeLeader with url http://192.168.2.162:80/ started
2020-03-08 09:59:26,379 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/Resources/qml/UM/Dialog.qml:86:13: QML Loader: Binding loop detected for property "active"
2020-03-08 09:59:26,962 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [215]: Trying to access OctoPrint instance at http://192.168.2.162:80/ with the provided API key.
2020-03-08 10:00:03,098 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [215]: Trying to access OctoPrint instance at http://192.168.2.171:5003/ with the provided API key.
2020-03-08 10:00:05,306 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [215]: Trying to access OctoPrint instance at http://192.168.2.162:80/ with the provided API key.
2020-03-08 10:00:06,681 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [215]: Trying to access OctoPrint instance at http://192.168.2.156:80/ with the provided API key.
2020-03-08 10:00:07,990 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [215]: Trying to access OctoPrint instance at http://192.168.2.162:80/ with the provided API key.
2020-03-08 10:00:09,413 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.disconnect [315]: Connection with instance OrangeLeader with url http://192.168.2.162:80/ stopped
2020-03-08 10:00:09,425 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/DiscoverOctoPrintAction.qml:522: TypeError: Cannot call method 'getId' of undefined
2020-03-08 10:00:09,935 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/DiscoverOctoPrintAction.qml:373: TypeError: Cannot read property 'baseURL' of undefined
2020-03-08 10:00:19,274 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-03-08 10:00:33,111 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-08 10:00:33,114 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device OrangeLeader already added
2020-03-08 10:00:33,116 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [303]: Connection with instance OrangeLeader with url http://192.168.2.171:5002/ started
2020-03-08 10:00:33,151 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device OrangeLeader already added
2020-03-08 10:00:33,151 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:00:33,685 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [215]: Trying to access OctoPrint instance at http://192.168.2.171:5002/ with the provided API key.
2020-03-08 10:00:37,222 - WARNING - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [371]: Start polling for AppKeys decision
2020-03-08 10:00:43,275 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-03-08 10:00:43,321 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:00:49,203 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [396]: AppKey granted
2020-03-08 10:00:53,290 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:01:03,288 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:01:13,284 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:01:23,307 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:01:33,288 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:01:43,290 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:01:53,288 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:02:03,293 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:02:13,292 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:02:23,293 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:02:33,301 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:02:43,288 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:02:53,288 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:03:03,282 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:03:13,293 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:03:23,300 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:03:33,291 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:03:43,368 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:03:53,298 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:04:03,291 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:04:13,301 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:04:23,304 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:04:33,292 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:04:43,304 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:04:53,296 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:05:03,291 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:05:13,304 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:05:23,303 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:05:30,182 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.disconnect [315]: Connection with instance OrangeLeader with url http://192.168.2.171:5002/ stopped
2020-03-08 10:05:30,194 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-08 10:05:30,197 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device OrangeLeader already added
2020-03-08 10:05:30,198 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [303]: Connection with instance OrangeLeader with url http://192.168.2.171:5002/ started
2020-03-08 10:05:30,204 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/Resources/qml/UM/Dialog.qml:86:13: QML Loader: Binding loop detected for property "active"
2020-03-08 10:05:30,256 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device OrangeLeader already added
2020-03-08 10:05:30,257 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:05:30,819 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [215]: Trying to access OctoPrint instance at http://192.168.2.171:5002/ with the provided API key.
2020-03-08 10:05:36,401 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.disconnect [315]: Connection with instance OrangeLeader with url http://192.168.2.171:5002/ stopped
2020-03-08 10:05:36,412 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/DiscoverOctoPrintAction.qml:522: TypeError: Cannot call method 'getId' of undefined
2020-03-08 10:05:36,419 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-08 10:05:36,422 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device OrangeLeader already added
2020-03-08 10:05:36,423 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [303]: Connection with instance OrangeLeader with url http://192.168.2.171:5003/ started
2020-03-08 10:05:36,467 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device OrangeLeader already added
2020-03-08 10:05:36,468 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:05:36,981 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [215]: Trying to access OctoPrint instance at http://192.168.2.171:5003/ with the provided API key.
2020-03-08 10:05:38,093 - WARNING - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [371]: Start polling for AppKeys decision
2020-03-08 10:05:43,823 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [396]: AppKey granted
2020-03-08 10:05:46,277 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-03-08 10:05:46,325 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:05:56,299 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:06:06,293 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:06:16,304 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:06:26,316 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:06:27,549 - WARNING - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [371]: Start polling for AppKeys decision
2020-03-08 10:06:27,751 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [215]: Trying to access OctoPrint instance at http://192.168.2.171:5003/ with the provided API key.
2020-03-08 10:06:27,823 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [418]: API key accepted by OctoPrint.
2020-03-08 10:06:36,296 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:06:37,477 - DEBUG - [MainThread] LinearAdvanceSettingPlugin.LinearAdvanceSettingPlugin._filterGcode [109]: No used extruders specify a linear advance factor
2020-03-08 10:06:37,671 - ERROR - [MainThread] UM.Logger.logException [98]: Exception: Unable to write to file WDI3P_motor_holder_1p0: 'NoneType' object has no attribute 'state'
2020-03-08 10:06:37,674 - ERROR - [MainThread] UM.Logger.logException [102]: Traceback (most recent call last):
2020-03-08 10:06:37,677 - ERROR - [MainThread] UM.Logger.logException [102]:   File "/Users/ultimaker/build/4.5/build/inst/lib/python3.5/site-packages/UM/Qt/Bindings/OutputDeviceManagerProxy.py", line 135, in _writeToDevice
2020-03-08 10:06:37,679 - ERROR - [MainThread] UM.Logger.logException [102]:   File "/Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/OctoPrintOutputDevice.py", line 367, in requestWrite
2020-03-08 10:06:37,681 - ERROR - [MainThread] UM.Logger.logException [102]:     if self.activePrinter.state == "offline" and "psucontrol" in self._plugin_data and use_psu_control:
2020-03-08 10:06:37,683 - ERROR - [MainThread] UM.Logger.logException [102]: AttributeError: 'NoneType' object has no attribute 'state'
2020-03-08 10:06:37,686 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._processRequest [308]: Request [040f7ad3dd514c9a8de3ecb7b32e5958] started
2020-03-08 10:06:37,688 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-08 10:06:38,051 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestFinished [369]: Request [040f7ad3dd514c9a8de3ecb7b32e5958] finished.
2020-03-08 10:06:38,054 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-08 10:06:38,057 - INFO - [MainThread] SliceInfoPlugin.SliceInfo._onRequestFinished [275]: SliceInfo sent successfully
2020-03-08 10:06:40,571 - DEBUG - [MainThread] LinearAdvanceSettingPlugin.LinearAdvanceSettingPlugin._filterGcode [109]: No used extruders specify a linear advance factor
2020-03-08 10:06:40,767 - ERROR - [MainThread] UM.Logger.logException [98]: Exception: Unable to write to file WDI3P_motor_holder_1p0: 'NoneType' object has no attribute 'state'
2020-03-08 10:06:40,769 - ERROR - [MainThread] UM.Logger.logException [102]: Traceback (most recent call last):
2020-03-08 10:06:40,771 - ERROR - [MainThread] UM.Logger.logException [102]:   File "/Users/ultimaker/build/4.5/build/inst/lib/python3.5/site-packages/UM/Qt/Bindings/OutputDeviceManagerProxy.py", line 135, in _writeToDevice
2020-03-08 10:06:40,773 - ERROR - [MainThread] UM.Logger.logException [102]:   File "/Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/OctoPrintOutputDevice.py", line 367, in requestWrite
2020-03-08 10:06:40,775 - ERROR - [MainThread] UM.Logger.logException [102]:     if self.activePrinter.state == "offline" and "psucontrol" in self._plugin_data and use_psu_control:
2020-03-08 10:06:40,777 - ERROR - [MainThread] UM.Logger.logException [102]: AttributeError: 'NoneType' object has no attribute 'state'
2020-03-08 10:06:40,780 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._processRequest [308]: Request [3861d7c6a5cf4a2d8db277fd895c6142] started
2020-03-08 10:06:40,782 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-08 10:06:40,962 - DEBUG - [MainThread] LinearAdvanceSettingPlugin.LinearAdvanceSettingPlugin._filterGcode [109]: No used extruders specify a linear advance factor
2020-03-08 10:06:41,162 - ERROR - [MainThread] UM.Logger.logException [98]: Exception: Unable to write to file WDI3P_motor_holder_1p0: 'NoneType' object has no attribute 'state'
2020-03-08 10:06:41,165 - ERROR - [MainThread] UM.Logger.logException [102]: Traceback (most recent call last):
2020-03-08 10:06:41,167 - ERROR - [MainThread] UM.Logger.logException [102]:   File "/Users/ultimaker/build/4.5/build/inst/lib/python3.5/site-packages/UM/Qt/Bindings/OutputDeviceManagerProxy.py", line 135, in _writeToDevice
2020-03-08 10:06:41,169 - ERROR - [MainThread] UM.Logger.logException [102]:   File "/Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/OctoPrintOutputDevice.py", line 367, in requestWrite
2020-03-08 10:06:41,171 - ERROR - [MainThread] UM.Logger.logException [102]:     if self.activePrinter.state == "offline" and "psucontrol" in self._plugin_data and use_psu_control:
2020-03-08 10:06:41,173 - ERROR - [MainThread] UM.Logger.logException [102]: AttributeError: 'NoneType' object has no attribute 'state'
2020-03-08 10:06:41,175 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._processRequest [308]: Request [7f9f8abecef2489aa32398ec36edabb7] started
2020-03-08 10:06:41,177 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-08 10:06:41,179 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestFinished [369]: Request [3861d7c6a5cf4a2d8db277fd895c6142] finished.
2020-03-08 10:06:41,182 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-08 10:06:41,185 - INFO - [MainThread] SliceInfoPlugin.SliceInfo._onRequestFinished [275]: SliceInfo sent successfully
2020-03-08 10:06:41,368 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestFinished [369]: Request [7f9f8abecef2489aa32398ec36edabb7] finished.
2020-03-08 10:06:41,372 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-08 10:06:41,372 - INFO - [MainThread] SliceInfoPlugin.SliceInfo._onRequestFinished [275]: SliceInfo sent successfully
2020-03-08 10:06:46,312 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:06:50,452 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.disconnect [315]: Connection with instance OrangeLeader with url http://192.168.2.171:5003/ stopped
2020-03-08 10:06:50,468 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-08 10:06:50,471 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device OrangeLeader already added
2020-03-08 10:06:50,472 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [303]: Connection with instance OrangeLeader with url http://192.168.2.171:5003/ started
2020-03-08 10:06:50,509 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/Resources/qml/UM/Dialog.qml:86:13: QML Loader: Binding loop detected for property "active"
2020-03-08 10:06:50,571 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device OrangeLeader already added
2020-03-08 10:06:50,572 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:06:50,951 - CRITICAL - [MainThread] cura.CrashHandler.__init__ [66]: An uncaught error has occurred!
2020-03-08 10:06:50,954 - CRITICAL - [MainThread] cura.CrashHandler.__init__ [69]: Traceback (most recent call last):
2020-03-08 10:06:50,956 - CRITICAL - [MainThread] cura.CrashHandler.__init__ [69]:   File "/Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/DiscoverOctoPrintAction.py", line 195, in _pollApiKey
2020-03-08 10:06:50,958 - CRITICAL - [MainThread] cura.CrashHandler.__init__ [69]:     self._appkey_reply = self._network_manager.get(self._appkey_request)
2020-03-08 10:06:50,960 - CRITICAL - [MainThread] cura.CrashHandler.__init__ [69]: TypeError: get(self, QNetworkRequest): argument 1 has unexpected type 'QNetworkReply'
2020-03-08 10:06:51,273 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [215]: Trying to access OctoPrint instance at http://192.168.2.171:5003/ with the provided API key.
2020-03-08 10:19:59,995 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin FileLogger
2020-03-08 10:20:00,001 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin LegacyProfileReader
2020-03-08 10:20:00,009 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin AMFReader
2020-03-08 10:20:00,015 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin SimpleView
2020-03-08 10:20:00,023 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin SolidView
2020-03-08 10:20:00,032 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin FirmwareUpdateChecker
2020-03-08 10:20:00,037 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin SentryLogger
2020-03-08 10:20:00,044 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin SupportEraser
2020-03-08 10:20:00,050 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin PrepareStage
2020-03-08 10:20:00,105 - WARNING - [MainThread] UM.PluginRegistry.loadPlugin [412]: Plugin [CuraInventorPlugin] with supported sdk versions [['5.0.0', '6.0.0', '6.1.0', '5.0.0']] is incompatible with the current sdk version [7.1.0].
2020-03-08 10:20:00,113 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin LinearAdvanceSettingPlugin
2020-03-08 10:20:00,118 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin VersionInTitlebarPlugin
2020-03-08 10:20:00,124 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin OrientationPlugin
2020-03-08 10:20:00,140 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin OctoPrintPlugin
2020-03-08 10:20:00,147 - DEBUG - [MainThread] SidebarGUIPlugin.__matchVersion [48]: This version of the plugin is not compatible with this version of Cura. Please check for an update.
2020-03-08 10:20:00,147 - WARNING - [MainThread] SidebarGUIPlugin.register [23]: Plugin not loaded because of a version mismatch
2020-03-08 10:20:00,150 - WARNING - [MainThread] UM.PluginRegistry.loadPlugin [419]: Plugin SidebarGUIPlugin did not return any objects to register
2020-03-08 10:20:00,159 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin MeshTools
2020-03-08 10:20:00,164 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin ZOffsetPlugin
2020-03-08 10:20:00,170 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin CustomSupports
2020-03-08 10:20:00,179 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin MaterialSettingsPlugin
2020-03-08 10:20:00,182 - DEBUG - [MainThread] UM.PluginRegistry.loadPlugins [369]: Loading all plugins took 0.893272876739502 seconds
2020-03-08 10:20:00,190 - INFO - [MainThread] UM.VersionUpgradeManager.upgrade [148]: Looking for old configuration files to upgrade.
2020-03-08 10:20:00,287 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-08 10:20:00,290 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-08 10:20:00,294 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-08 10:20:00,297 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-08 10:20:00,300 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-08 10:20:00,303 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-08 10:20:00,306 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-08 10:20:00,309 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-08 10:20:00,312 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-08 10:20:00,315 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-08 10:20:00,318 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-08 10:20:00,321 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-08 10:20:00,324 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-08 10:20:00,417 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ../3D4MakersFacilanC8/3d4makers_facilan_c8.xml.fdm_material, skip it
2020-03-08 10:20:04,286 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.loadAllMetadata [330]: Loading metadata into container registry took 3.700624942779541 seconds
2020-03-08 10:20:04,472 - DEBUG - [MainThread] cura.Scene.CuraSceneController.setActiveBuildPlate [111]: Select build plate: 0
2020-03-08 10:20:04,475 - INFO - [MainThread] cura.CuraApplication.run [761]: Initializing machine error checker
2020-03-08 10:20:04,539 - INFO - [MainThread] cura.UI.MachineActionManager.addDefaultMachineActions [72]: Default machine actions added for machine definition [wanhao_i3plus]
2020-03-08 10:20:04,867 - INFO - [MainThread] cura.Settings.GlobalStack.addExtruder [184]: Extruder[wanhao_i3plus_extruder_0 #2] added to [Wanhao Duplicator i3 Plus] at position [0]
2020-03-08 10:20:04,869 - WARNING - [MainThread] cura.Settings.ExtruderManager.registerExtruder [156]: Extruder [wanhao_i3plus_extruder_0 #2] has already been registered on machine [Wanhao Duplicator i3 Plus], not doing anything
2020-03-08 10:20:04,871 - INFO - [MainThread] FirmwareUpdateChecker.FirmwareUpdateChecker.checkFirmwareVersion [74]: No machine with name Wanhao Duplicator i3 Plus in list of firmware to check.
2020-03-08 10:20:05,002 - DEBUG - [MainThread] cura.Machines.ContainerTree.__getitem__ [106]: Adding container tree for wanhao_i3plus took 0.11450314521789551 seconds.
2020-03-08 10:20:05,006 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: BQ_PauseAtHeight
2020-03-08 10:20:05,008 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: ChangeAtZ
2020-03-08 10:20:05,009 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: ColorMix
2020-03-08 10:20:05,010 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: DisplayFilenameAndLayerOnLCD
2020-03-08 10:20:05,011 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: DisplayRemainingTimeOnLCD
2020-03-08 10:20:05,012 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: FilamentChange
2020-03-08 10:20:05,013 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: InsertAtLayerChange
2020-03-08 10:20:05,013 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: PauseAtHeight
2020-03-08 10:20:05,014 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: PauseAtHeightRepRapFirmwareDuet
2020-03-08 10:20:05,015 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: PauseAtHeightforRepetier
2020-03-08 10:20:05,016 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: RetractContinue
2020-03-08 10:20:05,017 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: SearchAndReplace
2020-03-08 10:20:05,018 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: Stretch
2020-03-08 10:20:05,019 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: TimeLapse
2020-03-08 10:20:05,019 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: UsePreviousProbeMeasurements
2020-03-08 10:20:05,129 - INFO - [MainThread] cura.CuraApplication.run [766]: Initializing machine manager
2020-03-08 10:20:05,134 - INFO - [MainThread] cura.CuraApplication.run [771]: Initializing container manager
2020-03-08 10:20:05,222 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-08 10:20:05,228 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [303]: Connection with instance OrangeLeader with url http://192.168.2.171:5003/ started
2020-03-08 10:20:05,282 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [135]: New error check scheduled.
2020-03-08 10:20:05,317 - DEBUG - [MainThread] UM.Scene.Camera._preferencesChanged [246]: Changing perspective mode to perspective.
2020-03-08 10:20:05,780 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [158]: Loading theme file: /Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/themes/cura-dark/theme.json
2020-03-08 10:20:05,784 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [158]: Loading theme file: /Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/themes/cura-light/theme.json
2020-03-08 10:20:06,005 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [231]: Loaded theme /Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/themes/cura-light
2020-03-08 10:20:06,009 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [231]: Loaded theme /Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/themes/cura-dark
2020-03-08 10:20:06,459 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin._createView [304]: Creating post processing plugin view.
2020-03-08 10:20:06,569 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin._createView [314]: Post processing view created.
2020-03-08 10:20:06,715 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._parseJWT [91]: There was no auth data or access token
2020-03-08 10:20:06,717 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._parseJWT [91]: There was no auth data or access token
2020-03-08 10:20:06,720 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._parseJWT [91]: There was no auth data or access token
2020-03-08 10:20:06,722 - WARNING - [MainThread] UM.Qt.Bindings.Theme.getImage [133]: No image header_pattern defined in Theme
2020-03-08 10:20:07,181 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-08 10:20:07,184 - WARNING - [MainThread] UM.Decorators.deprecated_function [20]: <function GlobalStack.extruders at 0x600004b75b18> is deprecated (since 4.4): Please use extruderList instead.
2020-03-08 10:20:07,368 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:125:27: Unable to assign [undefined] to int
2020-03-08 10:20:07,372 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:76:29: Unable to assign null to double
2020-03-08 10:20:07,382 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._createAdditionalComponentsView [350]: Creating additional ui components for OctoPrint-connected printers.
2020-03-08 10:20:07,392 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/Resources/qml/QtQuick/Controls/Button.qml:99: TypeError: Cannot read property of null
2020-03-08 10:20:07,395 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/OctoPrintComponents.qml:25:16: Unable to assign [undefined] to QQmlComponent*
2020-03-08 10:20:07,397 - DEBUG - [MainThread] MaterialSettingsPlugin.MaterialSettingsPlugin._onEngineCreated [64]: Replacing Materials preferencepane with patched version
2020-03-08 10:20:07,406 - DEBUG - [MainThread] UM.Controller.setActiveStage [149]: Setting active stage to PrepareStage
2020-03-08 10:20:07,481 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-08 10:20:07,553 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-08 10:20:07,556 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-08 10:20:07,559 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/plugins/plugins/PrepareStage/PrepareMain.qml:16:5: QML ActionPanelWidget: Binding loop detected for property "width"
2020-03-08 10:20:07,563 - DEBUG - [MainThread] UM.Controller.setActiveView [91]: Setting active view to SolidView
2020-03-08 10:20:07,575 - DEBUG - [MainThread] SliceInfoPlugin.SliceInfo._createDialog [71]: Creating dialog [MoreInfoWindow.qml]
2020-03-08 10:20:07,589 - DEBUG - [MainThread] ModelChecker.ModelChecker._createView [109]: Creating model checker view.
2020-03-08 10:20:07,595 - DEBUG - [MainThread] ModelChecker.ModelChecker._createView [118]: Model checker view created.
2020-03-08 10:20:07,598 - DEBUG - [MainThread] Toolbox.src.Toolbox._makeRequestByType [536]: Requesting [updates] metadata from server.
2020-03-08 10:20:07,602 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.getAccessToken [114]: No auth data to retrieve the access_token from
2020-03-08 10:20:07,604 - WARNING - [MainThread] UM.Logger.warning [117]: Cannot add authorization to Cloud Api request
2020-03-08 10:20:07,719 - DEBUG - [MainThread] cura.CuraApplication.run [809]: Booting Cura took 8.723190069198608 seconds
2020-03-08 10:20:08,053 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._processRequest [308]: Request [09d71caa0b134af896a4de137ecec5e6] started
2020-03-08 10:20:08,056 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-08 10:20:08,058 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-08 10:20:08,077 - INFO - [MainThread] FirmwareUpdateChecker.FirmwareUpdateChecker.checkFirmwareVersion [74]: No machine with name Monoprice Select Mini V2 (E3D) in list of firmware to check.
2020-03-08 10:20:08,080 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-08 10:20:08,087 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-08 10:20:08,096 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-08 10:20:08,103 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-08 10:20:08,111 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-08 10:20:08,118 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-08 10:20:08,126 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-08 10:20:08,147 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-08 10:20:08,160 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [63]: Updating QualityProfilesDropDownMenuModel.
2020-03-08 10:20:08,877 - DEBUG - [Thread-3] cura.Machines.ContainerTree.__getitem__ [106]: Adding container tree for monoprice_select_mini_v2 took 0.6481940746307373 seconds.
2020-03-08 10:20:09,261 - DEBUG - [MainThread] UM.Qt.QtRenderer._initialize [188]: Support for Vertex Array Objects: True
2020-03-08 10:20:09,265 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [111]: Initialized OpenGL subsystems.
2020-03-08 10:20:09,267 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [112]: OpenGL Version:  4.1 INTEL-14.4.23
2020-03-08 10:20:09,269 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [113]: OpenGL Vendor:   Intel Inc.
2020-03-08 10:20:09,272 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [114]: OpenGL Renderer: Intel(R) Iris(TM) Plus Graphics 655
2020-03-08 10:20:09,274 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [115]: GLSL Version:    4.10.0
2020-03-08 10:20:09,276 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/default.shader]...
2020-03-08 10:20:09,282 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/selection.shader]...
2020-03-08 10:20:09,287 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/select_face.shader]...
2020-03-08 10:20:09,292 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/default.shader]...
2020-03-08 10:20:09,297 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/composite.shader]...
2020-03-08 10:20:09,304 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/overhang.shader]...
2020-03-08 10:20:09,311 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/striped.shader]...
2020-03-08 10:20:09,317 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/transparent_object.shader]...
2020-03-08 10:20:09,322 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/striped.shader]...
2020-03-08 10:20:09,329 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/default.shader]...
2020-03-08 10:20:09,333 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/grid.shader]...
2020-03-08 10:20:09,339 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/platform.shader]...
2020-03-08 10:20:09,908 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-08 10:20:09,916 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [63]: Updating QualityProfilesDropDownMenuModel.
2020-03-08 10:20:10,026 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestFinished [369]: Request [09d71caa0b134af896a4de137ecec5e6] finished.
2020-03-08 10:20:10,028 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-08 10:20:10,427 - INFO - [MainThread] cura.Machines.MachineErrorChecker._setResult [187]: Error check finished, result = False, time = 5.2s
2020-03-08 10:20:19,311 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-03-08 10:20:29,125 - INFO - [Thread-4] STLReader.STLReader.load_file [51]: Using NumPy-STL to load STL data.
2020-03-08 10:20:29,493 - DEBUG - [Thread-4] UM.Mesh.MeshData.calculateNormalsFromVertices [495]: Calculating normals took 0.0008180141448974609 seconds
2020-03-08 10:20:29,494 - DEBUG - [Thread-4] STLReader.STLReader._read [102]: Loaded a mesh with 35922 vertices
2020-03-08 10:20:29,512 - DEBUG - [Thread-4] UM.Mesh.MeshData.approximateConvexHull [452]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.013070821762084961 seconds. 154 input vertices. 154 output vertices.
2020-03-08 10:20:29,525 - DEBUG - [Thread-4] UM.FileHandler.ReadFileJob.run [71]: Loading file took 0.4 seconds
2020-03-08 10:20:29,542 - DEBUG - [Thread-4] UM.Mesh.MeshData.approximateConvexHull [452]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.013015985488891602 seconds. 154 input vertices. 154 output vertices.
2020-03-08 10:20:29,613 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: <UM.Operations.AddSceneNodeOperation.AddSceneNodeOperation object at 0x600011b2bf98>, took 9ms
2020-03-08 10:20:29,619 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/transparent_object.shader]...
2020-03-08 10:20:35,893 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/Resources/qml/UM/Dialog.qml:86:13: QML Loader: Binding loop detected for property "active"
2020-03-08 10:20:36,433 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [215]: Trying to access OctoPrint instance at http://192.168.2.171:5003/ with the provided API key.
2020-03-08 10:20:44,970 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.disconnect [315]: Connection with instance OrangeLeader with url http://192.168.2.171:5003/ stopped
2020-03-08 10:20:44,982 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/DiscoverOctoPrintAction.qml:522: TypeError: Cannot call method 'getId' of undefined
2020-03-08 10:20:45,493 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/DiscoverOctoPrintAction.qml:373: TypeError: Cannot read property 'baseURL' of undefined
2020-03-08 10:20:55,309 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-03-08 10:21:13,594 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-08 10:21:13,599 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device OrangeLeader already added
2020-03-08 10:21:13,600 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [303]: Connection with instance OrangeLeader with url http://192.168.2.171:5002/ started
2020-03-08 10:21:13,639 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device OrangeLeader already added
2020-03-08 10:21:13,659 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:21:14,155 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [215]: Trying to access OctoPrint instance at http://192.168.2.171:5002/ with the provided API key.
2020-03-08 10:21:16,456 - WARNING - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [371]: Start polling for AppKeys decision
2020-03-08 10:21:23,313 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-03-08 10:21:23,366 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:21:33,321 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:21:42,956 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [396]: AppKey granted
2020-03-08 10:21:43,324 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:21:53,326 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:21:53,341 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.disconnect [315]: Connection with instance OrangeLeader with url http://192.168.2.171:5002/ stopped
2020-03-08 10:21:53,351 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/DiscoverOctoPrintAction.qml:522: TypeError: Cannot call method 'getId' of undefined
2020-03-08 10:21:53,867 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/DiscoverOctoPrintAction.qml:373: TypeError: Cannot read property 'baseURL' of undefined
2020-03-08 10:21:54,541 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/DiscoverOctoPrintAction.qml:522: TypeError: Cannot call method 'getId' of undefined
2020-03-08 10:21:55,056 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/DiscoverOctoPrintAction.qml:373: TypeError: Cannot read property 'baseURL' of undefined
2020-03-08 10:21:56,250 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/DiscoverOctoPrintAction.qml:522: TypeError: Cannot call method 'getId' of undefined
2020-03-08 10:21:56,766 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/DiscoverOctoPrintAction.qml:373: TypeError: Cannot read property 'baseURL' of undefined
2020-03-08 10:22:01,678 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/DiscoverOctoPrintAction.qml:522: TypeError: Cannot call method 'getId' of undefined
2020-03-08 10:22:02,194 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/DiscoverOctoPrintAction.qml:373: TypeError: Cannot read property 'baseURL' of undefined
2020-03-08 10:22:04,313 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-03-08 10:22:08,243 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/DiscoverOctoPrintAction.qml:522: TypeError: Cannot call method 'getId' of undefined
2020-03-08 10:22:08,781 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/DiscoverOctoPrintAction.qml:373: TypeError: Cannot read property 'baseURL' of undefined
2020-03-08 10:22:27,056 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-08 10:22:27,059 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device OrangeLeader already added
2020-03-08 10:22:27,061 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [303]: Connection with instance OrangeLeader with url http://192.168.2.171:5002/ started
2020-03-08 10:22:27,111 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device OrangeLeader already added
2020-03-08 10:22:27,112 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:22:27,644 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [215]: Trying to access OctoPrint instance at http://192.168.2.171:5002/ with the provided API key.
2020-03-08 10:22:29,651 - WARNING - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [371]: Start polling for AppKeys decision
2020-03-08 10:22:33,317 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [396]: AppKey granted
2020-03-08 10:22:37,310 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-03-08 10:22:37,389 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:22:47,361 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:22:57,337 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:22:59,364 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [215]: Trying to access OctoPrint instance at http://192.168.2.171:5002/ with the provided API key.
2020-03-08 10:23:07,325 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:23:17,317 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:23:27,331 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:23:37,344 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:23:47,330 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:23:52,628 - WARNING - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [371]: Start polling for AppKeys decision
2020-03-08 10:23:57,328 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:24:01,320 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [396]: AppKey granted
2020-03-08 10:24:01,826 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [215]: Trying to access OctoPrint instance at http://192.168.2.171:5002/ with the provided API key.
2020-03-08 10:24:07,327 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:24:15,686 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.disconnect [315]: Connection with instance OrangeLeader with url http://192.168.2.171:5002/ stopped
2020-03-08 10:24:15,700 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-08 10:24:15,703 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device OrangeLeader already added
2020-03-08 10:24:15,704 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [303]: Connection with instance OrangeLeader with url http://192.168.2.171:5002/ started
2020-03-08 10:24:15,736 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device OrangeLeader already added
2020-03-08 10:24:15,737 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:24:16,229 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [215]: Trying to access OctoPrint instance at http://192.168.2.171:5002/ with the provided API key.
2020-03-08 10:24:16,330 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevicePlugin._keepDiscoveryAlive [112]: Zeroconf discovery has died, restarting discovery of OctoPrint instances.
2020-03-08 10:24:16,331 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.disconnect [315]: Connection with instance OrangeLeader with url http://192.168.2.171:5002/ stopped
2020-03-08 10:24:16,341 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-08 10:24:16,346 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device OrangeLeader already added
2020-03-08 10:24:16,347 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [303]: Connection with instance OrangeLeader with url http://192.168.2.171:5002/ started
2020-03-08 10:24:16,378 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device OrangeLeader already added
2020-03-08 10:24:16,378 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:24:16,835 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [215]: Trying to access OctoPrint instance at http://192.168.2.171:5002/ with the provided API key.
2020-03-08 10:24:25,315 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-03-08 10:24:26,329 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:24:27,459 - WARNING - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [371]: Start polling for AppKeys decision
2020-03-08 10:24:31,672 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [396]: AppKey granted
2020-03-08 10:24:32,180 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [215]: Trying to access OctoPrint instance at http://192.168.2.171:5002/ with the provided API key.
2020-03-08 10:24:36,327 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:24:46,335 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:24:56,322 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:25:06,329 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:25:16,333 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:25:26,342 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:25:36,329 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:25:46,326 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:25:56,328 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:26:06,330 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:26:16,344 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:26:26,333 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:26:36,328 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:26:46,339 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:26:56,330 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:27:06,351 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:27:16,346 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:27:26,322 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:27:36,339 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:27:46,342 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:27:56,334 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:28:06,340 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:28:16,341 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:28:26,336 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:28:36,325 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:28:46,344 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:28:56,336 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:29:06,333 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:29:16,341 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:29:26,336 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:29:36,324 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:29:43,111 - WARNING - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [371]: Start polling for AppKeys decision
2020-03-08 10:29:46,328 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:29:46,340 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [396]: AppKey granted
2020-03-08 10:29:55,855 - WARNING - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [371]: Start polling for AppKeys decision
2020-03-08 10:29:56,331 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:29:59,837 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [396]: AppKey granted
2020-03-08 10:30:00,345 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [215]: Trying to access OctoPrint instance at http://192.168.2.171:5002/ with the provided API key.
2020-03-08 10:30:06,333 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:30:16,342 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:30:26,335 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:30:36,351 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:30:46,333 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:30:56,337 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:31:06,342 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:31:16,400 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:31:26,341 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:31:36,341 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:31:46,361 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:31:56,434 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:32:06,356 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:32:16,357 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:32:26,357 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:32:36,367 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:32:46,350 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:32:56,500 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:33:06,357 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:33:16,367 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:33:26,371 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:33:36,369 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:33:46,355 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:33:56,459 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:34:06,347 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:34:16,456 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:34:26,463 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:34:36,334 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:34:46,345 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:34:56,375 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:35:06,363 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:35:16,364 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:35:26,355 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:35:36,345 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:35:46,340 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:35:56,352 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:36:06,365 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:36:16,348 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:36:26,450 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:36:36,345 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:36:46,348 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:36:56,341 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:37:06,335 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:37:16,355 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:37:26,446 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:37:36,335 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:37:46,349 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:37:56,348 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:38:06,346 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:38:16,441 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:38:26,443 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:38:36,444 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:38:46,371 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:38:56,357 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:39:06,449 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:39:16,341 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:39:26,351 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:39:36,354 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:39:46,460 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:39:56,454 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:40:06,922 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:40:16,443 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:40:26,358 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:40:36,359 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:40:46,351 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:40:56,352 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:41:06,346 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:41:16,343 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:41:26,338 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:41:36,350 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:41:46,360 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:41:56,347 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:42:06,346 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:42:16,351 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:42:26,359 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:42:36,343 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:42:46,339 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:42:56,537 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:43:06,346 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:43:16,359 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:43:26,351 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:43:36,340 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:43:46,475 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:43:56,352 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:44:06,356 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:44:16,340 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:44:26,365 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:44:36,347 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:44:46,355 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:44:56,351 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:45:06,348 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:45:16,345 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:45:26,346 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:45:36,455 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:45:46,361 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:45:56,345 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:46:06,365 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:46:16,346 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:46:26,359 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:46:36,366 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:46:46,358 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:46:56,351 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:47:06,371 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:47:16,439 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:47:26,364 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:47:36,350 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:47:46,361 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:47:56,371 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:48:06,355 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:48:16,352 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:48:26,351 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:48:36,350 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:48:46,469 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:48:56,347 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:49:06,361 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:49:16,360 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:49:26,519 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:49:36,374 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:49:46,365 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:49:56,369 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:50:06,489 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:50:16,362 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:50:26,363 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:50:36,359 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:50:46,375 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:50:56,461 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:51:06,374 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:51:16,388 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:51:46,374 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:52:06,505 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:52:26,570 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:52:46,599 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:53:06,695 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:53:26,681 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:53:46,851 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:54:06,938 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:54:27,041 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:54:47,077 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:55:07,126 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:55:27,331 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:55:47,236 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:56:07,337 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:56:27,456 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:56:47,529 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:57:07,780 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:57:27,677 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:57:47,685 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:58:07,735 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:58:27,758 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:58:57,410 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:59:17,445 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:59:37,491 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 10:59:57,539 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:00:17,615 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:00:37,752 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:00:56,489 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:01:16,507 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:01:46,399 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:02:06,499 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:02:26,659 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:02:46,754 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:03:06,848 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:03:26,947 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:03:47,039 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:04:07,146 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:04:27,166 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:04:47,345 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:05:07,439 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:05:07,705 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:05:27,559 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:05:47,562 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:06:07,656 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:06:27,706 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:06:47,748 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:07:07,756 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:07:37,406 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:07:57,455 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:08:17,501 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:08:37,512 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:08:57,515 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:09:17,660 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:09:37,657 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:09:57,704 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:10:17,748 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:10:37,799 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:10:57,824 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:11:17,907 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:11:37,925 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:11:58,016 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:12:18,025 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:12:38,152 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:12:58,408 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:13:18,307 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:13:38,358 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:13:58,376 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:13:58,456 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:14:18,554 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:14:38,656 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:14:58,665 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:15:18,765 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:15:38,776 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:15:58,924 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:16:19,020 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:16:39,055 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:16:59,110 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:17:19,107 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:17:39,235 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:17:59,370 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:17:59,407 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:18:29,410 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:18:49,563 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:19:09,684 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:19:29,638 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:19:39,418 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:19:51,682 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:19:59,420 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:20:19,627 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:20:39,667 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:20:59,673 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:21:19,782 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:21:39,914 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:22:00,023 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:22:20,063 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:22:40,111 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:23:00,212 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:23:20,225 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:23:40,240 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:24:00,366 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:24:20,478 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:24:40,622 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:25:00,722 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:25:20,816 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:25:40,928 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:25:50,538 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:26:10,624 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:26:30,673 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:26:50,677 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:27:10,782 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:27:30,787 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:28:00,430 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:28:20,538 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:28:40,671 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:29:00,794 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:29:20,880 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:29:43,533 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:30:03,775 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:30:23,890 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:30:43,723 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:30:54,849 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:31:03,523 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:31:23,673 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:31:43,669 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:32:03,724 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:32:23,752 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:32:43,767 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:33:03,802 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:33:23,818 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:33:43,833 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:34:03,851 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:34:23,912 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:34:43,926 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:35:03,967 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:35:23,995 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:35:44,006 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:36:04,090 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:36:24,102 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:36:44,198 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:37:04,194 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:37:24,271 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:37:44,410 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:38:04,542 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:38:24,615 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:38:44,660 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:38:59,300 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:39:04,425 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:39:24,486 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:39:34,816 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:39:44,444 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:39:54,435 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:40:04,441 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:40:14,427 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:40:24,433 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:40:34,435 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:40:44,443 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:40:54,428 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:41:04,438 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:41:14,442 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:41:24,430 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:41:34,433 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:41:44,424 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:41:54,424 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:42:04,425 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:42:14,434 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:42:24,432 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:42:34,438 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:42:44,627 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:42:54,432 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:43:04,444 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:43:14,427 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:43:24,430 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:43:34,439 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:43:44,430 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:43:54,428 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:44:04,428 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:44:14,429 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:44:24,440 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:44:28,036 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.disconnect [315]: Connection with instance OrangeLeader with url http://192.168.2.171:5002/ stopped
2020-03-08 11:44:28,067 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-08 11:44:28,070 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device OrangeLeader already added
2020-03-08 11:44:28,071 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [303]: Connection with instance OrangeLeader with url http://192.168.2.171:5002/ started
2020-03-08 11:44:28,076 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/Resources/qml/UM/Dialog.qml:86:13: QML Loader: Binding loop detected for property "active"
2020-03-08 11:44:28,135 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device OrangeLeader already added
2020-03-08 11:44:28,136 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:44:28,669 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [215]: Trying to access OctoPrint instance at http://192.168.2.171:5002/ with the provided API key.
2020-03-08 11:44:35,772 - WARNING - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [371]: Start polling for AppKeys decision
2020-03-08 11:44:38,428 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:44:39,433 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [396]: AppKey granted
2020-03-08 11:44:48,431 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:44:53,561 - WARNING - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [371]: Start polling for AppKeys decision
2020-03-08 11:44:58,437 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:45:00,018 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [396]: AppKey granted
2020-03-08 11:45:08,443 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:45:18,426 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:45:28,434 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:45:38,433 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:45:48,432 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:45:58,434 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:46:08,444 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:46:18,444 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:46:23,840 - WARNING - [MainThread] UM.PluginRegistry._populateMetaData [680]: Could not find plugin global_stack
2020-03-08 11:46:23,843 - WARNING - [MainThread] UM.PluginRegistry._populateMetaData [680]: Could not find plugin extruder_stack
2020-03-08 11:46:23,856 - WARNING - [MainThread] cura.Settings.ContainerManager.getContainerMetaDataEntry [58]: Could not get metadata of container Unknown because it was not found.
2020-03-08 11:46:24,012 - WARNING - [MainThread] cura.Settings.ContainerManager.getContainerMetaDataEntry [58]: Could not get metadata of container Unknown because it was not found.
2020-03-08 11:46:24,034 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/MaterialSettingsPlugin/MaterialSettingsPlugin/qml/MaterialPreferences/MaterialsDetailsPanel.qml:91: TypeError: Cannot read property 'container_node' of null
2020-03-08 11:46:24,050 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/MaterialSettingsPlugin/MaterialSettingsPlugin/qml/MaterialPreferences/MaterialsPage.qml:281:13: QML MaterialsList: Binding loop detected for property "height"
2020-03-08 11:46:24,054 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Preferences/Materials/MaterialsList.qml:136:5: QML Column: Binding loop detected for property "height"
2020-03-08 11:46:26,478 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Preferences/ProfilesPage.qml:555: TypeError: Cannot read property 'is_read_only' of null
2020-03-08 11:46:26,548 - DEBUG - [MainThread] cura.Machines.Models.QualityManagementModel._update [289]: Updating QualityManagementModel.
2020-03-08 11:46:28,438 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:46:38,456 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:46:48,426 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:46:58,428 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:47:08,437 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:47:18,434 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:47:28,427 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:47:38,427 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:47:48,441 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:47:58,442 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:48:08,440 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:48:18,445 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:48:28,442 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:48:38,446 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:48:48,438 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:48:58,439 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:49:08,442 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:49:18,439 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:49:28,433 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:49:38,432 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:49:48,447 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:49:58,443 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:50:08,441 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:50:28,446 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:50:48,454 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:50:58,444 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:51:08,452 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:51:28,443 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:51:38,441 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:51:58,448 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:52:15,072 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:52:28,448 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:52:38,451 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:52:58,439 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:53:08,449 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:53:20,135 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:53:38,455 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:53:58,353 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:53:58,436 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:54:08,457 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:54:18,455 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:54:28,448 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:54:38,453 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:54:56,139 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:54:58,455 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:55:08,453 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:55:18,445 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:55:28,511 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:55:38,453 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:55:48,445 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:55:58,454 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:56:08,451 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:56:18,452 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:56:28,454 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:56:38,443 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:56:48,450 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:56:58,448 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:57:08,453 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:57:18,451 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:57:28,453 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:57:38,452 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:57:48,508 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:57:58,447 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:58:08,446 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:58:20,143 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:58:28,455 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:58:38,452 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:58:48,456 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:58:58,456 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:59:08,447 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:59:18,460 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:59:28,456 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:59:38,460 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:59:48,460 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 11:59:58,465 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 12:00:08,459 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 12:00:18,459 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 12:00:28,468 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 12:00:38,460 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 12:00:48,460 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 12:00:58,461 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 12:01:08,462 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 12:01:18,458 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 12:01:28,461 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 12:01:38,456 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 12:01:49,340 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 12:01:58,503 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 12:02:05,211 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.disconnect [315]: Connection with instance OrangeLeader with url http://192.168.2.171:5002/ stopped
2020-03-08 12:02:05,222 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-08 12:02:05,225 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device OrangeLeader already added
2020-03-08 12:02:05,226 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [303]: Connection with instance OrangeLeader with url http://192.168.2.171:5002/ started
2020-03-08 12:02:05,231 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/Resources/qml/UM/Dialog.qml:86:13: QML Loader: Binding loop detected for property "active"
2020-03-08 12:02:05,288 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device OrangeLeader already added
2020-03-08 12:02:05,288 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 12:02:05,838 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [215]: Trying to access OctoPrint instance at http://192.168.2.171:5002/ with the provided API key.
2020-03-08 12:02:08,031 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.disconnect [315]: Connection with instance OrangeLeader with url http://192.168.2.171:5002/ stopped
2020-03-08 12:02:08,043 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/DiscoverOctoPrintAction.qml:522: TypeError: Cannot call method 'getId' of undefined
2020-03-08 12:02:08,559 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/DiscoverOctoPrintAction.qml:373: TypeError: Cannot read property 'baseURL' of undefined
2020-03-08 12:02:18,445 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-03-08 12:02:37,565 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-08 12:02:37,569 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device OrangeLeader already added
2020-03-08 12:02:37,570 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [303]: Connection with instance OrangeLeader with url http://192.168.2.171:5002/ started
2020-03-08 12:02:37,615 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device OrangeLeader already added
2020-03-08 12:02:37,616 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 12:02:38,149 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [215]: Trying to access OctoPrint instance at http://192.168.2.171:5002/ with the provided API key.
2020-03-08 12:02:39,937 - WARNING - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [371]: Start polling for AppKeys decision
2020-03-08 12:02:44,464 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [396]: AppKey granted
2020-03-08 12:02:47,441 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-03-08 12:02:47,493 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 12:02:57,458 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 12:02:58,714 - WARNING - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [371]: Start polling for AppKeys decision
2020-03-08 12:03:01,965 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [396]: AppKey granted
2020-03-08 12:03:07,453 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 12:03:12,101 - WARNING - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [371]: Start polling for AppKeys decision
2020-03-08 12:03:15,040 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [396]: AppKey granted
2020-03-08 12:03:15,546 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [215]: Trying to access OctoPrint instance at http://192.168.2.171:5002/ with the provided API key.
2020-03-08 12:03:17,467 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 12:03:27,448 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 12:03:37,447 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 12:03:47,453 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 12:03:57,456 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 12:04:07,465 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 12:04:17,453 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 12:04:27,462 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 12:04:37,466 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 12:04:47,450 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 12:04:57,470 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 12:05:07,462 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 12:05:17,466 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 12:05:27,451 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 12:05:37,455 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 12:05:47,451 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 12:05:57,455 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 12:06:07,450 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 12:06:17,447 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 12:06:27,462 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 12:06:37,461 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 12:06:47,456 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 12:06:57,443 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 12:07:07,461 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 12:07:17,460 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 12:07:27,451 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 12:07:37,466 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 12:07:47,453 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 12:07:57,457 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 12:08:07,460 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 12:08:17,448 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 12:08:27,462 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 12:08:37,451 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 12:08:47,565 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 12:08:57,505 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 12:09:07,473 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-08 12:09:17,452 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-11 17:42:55,352 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [225]: Starting to slice...
2020-03-11 17:42:55,361 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [243]: Going to slice build plate [0]!
2020-03-11 17:42:55,531 - WARNING - [Thread-5] UM.Decorators.deprecated_function [20]: <function GlobalStack.extruders at 0x600004b75b18> is deprecated (since 4.4): Please use extruderList instead.
2020-03-11 17:42:55,961 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onStartSliceCompleted [429]: Sending slice message took 0.5997638702392578 seconds
2020-03-11 17:42:56,001 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING]  -s speed_travel="120" -s mesh_position_y="0" -s adaptive_layer_height_threshold="0.2" -s support_initial_layer_line_distance="2.6666666666666665" -s command_line_settings="0" -s initial_extruder_nr="0" -s machine_disallowed_areas="[]" -s raft_surface_acceleration="3000" -s raft_interface_line_width="0.8" -s wall_line_width="0.4" -s infill_wipe_dist="0.1" -s small_hole_max_size="0" -s machine_height="180" -s travel_retract_before_outer_wall="False" -s wall_min_flow_retract="False" -s machine_max_feedrate_z="299792458000" -s retraction_hop_after_extruder_switch_height="1" -s support_conical_angle="30" -s minimum_interface_area="1.0" -s fill_perimeter_gaps="everywhere" -s support_enable="False" -s raft_interface_acceleration="3000" -s roofing_angles="[ ]" -s raft_surface_fan_speed="0" -s support_bottom_stair_step_width="5.0" -s support_tree_branch_distance="1" -s draft_shield_enabled="False" -s extruder_prime_pos_y="0" -s coasting_enable="False" -s zig_zaggify_infill="False" -s meshfix_union_all_remove_holes="False" -s material_flow_dependent_temperature="False" -s bottom_layers="8" -s bridge_wall_coast="100" -s material_linear_advance_factor_support_interface="0" -s infill_randomize_start_location="False" -s support_bottom_line_width="0.4" -s brim_replaces_support="True" -s jerk_support_bottom="20" -s raft_surface_line_width="0.4" -s bridge_enable_more_layers="True" -s retraction_speed="25" -s support_interface_height="1" -s bridge_skin_material_flow="60" -s support_brim_width="8.0" -s support_roof_line_width="0.4" -s infill_support_angle="40" -s skin_no_small_gaps_heuristic="False" -s ooze_shield_dist="2" -s ironing_line_spacing="0.1" -s support_interface_angles="[ ]" -s retraction_extrusion_window="6.5" -s support_fan_enable="False" -s raft_interface_fan_speed="0" -s support_bottom_stair_step_height="0.3" -s machine_shape="rectangular" -s wall_x_extruder_nr="-1" -s switch_extruder_prime_speed="20" -s machine_head_with_fans_polygon="[[-20, 10], [10, 10], [10, -10], [10, -10]]" -s z_seam_corner="z_seam_corner_inner" -s raft_surface_jerk="20" -s adaptive_layer_height_variation_step="0.01" -s gradual_infill_step_height="1.5" -s z_seam_y="200" -s support_roof_offset="0.0" -s travel="0" -s raft_base_fan_speed="0" -s support_tree_collision_resolution="0.2" -s retraction_hop_only_when_collides="False" -s acceleration_layer_0="3000" -s roofing_extruder_nr="-1" -s skirt_line_count="4" -s speed_roofing="30.0" -s acceleration_support_roof="3000" -s wall_x_material_flow="100" -s support_z_distance="0.1" -s meshfix_union_all="True" -s cool_min_layer_time_fan_speed_max="10" -s layer_start_x="0.0" -s machine_min_cool_heat_time_window="50.0" -s draft_shield_dist="10" -s skin_angles="[ ]" -s center_object="False" -s retract_at_layer_change="False" -s jerk_ironing="20" -s material_print_temperature_layer_0="210" -s gradual_support_infill_steps="0" -s roofing_material_flow="100" -s prime_tower_wipe_enabled="True" -s wireframe_drag_along="0.6" -s adhesion_type="skirt" -s raft_margin="15" -s machine_max_jerk_e="5.0" -s skin_line_width="0.4" -s bridge_skin_density="100" -s support_infill_extruder_nr="0" -s cooling="0" -s machine_feeder_wheel_diameter="10.0" -s machine_max_acceleration_e="10000" -s machine_start_gcode="" -s initial_layer_line_width_factor="100.0" -s infill_enable_travel_optimization="False" -s material_extrusion_cool_down_speed="0.7" -s acceleration_support="3000" -s material_end_of_filament_purge_speed="0.5" -s optimize_wall_printing_order="False" -s spaghetti_max_height="2.0" -s top_layers="8" -s jerk_layer_0="20" -s material_guid="" -s machine_acceleration="4000" -s max_skin_angle_for_expansion="90" -s default_material_bed_temperature="60" -s machine_filament_park_distance="16" -s brim_gap="0" -s acceleration_support_infill="3000" -s raft_surface_thickness="0.1" -s infill_offset_x="0" -s raft_fan_speed="0" -s magic_mesh_surface_mode="normal" -s support_pattern="lines" -s support_skip_zag_per_mm="20" -s line_width="0.4" -s roofing_layer_count="0" -s magic_fuzzy_skin_point_density="1.25" -s infill_sparse_thickness="0.1" -s speed_layer_0="30.0" -s material_standby_temperature="150" -s brim_outside_only="True" -s switch_extruder_extra_prime_amount="0" -s retraction_min_travel="0.8" -s spaghetti_max_infill_angle="10" -s acceleration_support_interface="3000" -s machine_steps_per_mm_y="50" -s wireframe_printspeed="5" -s support_tree_branch_diameter="2" -s travel_speed="120" -s speed="0" -s xy_offset="0" -s bridge_settings_enabled="False" -s infill_angles="[ ]" -s support_xy_distance="0.7" -s speed_wall="30.0" -s wall_material_flow="100" -s material_flow_layer_0="100" -s retraction_combing="all" -s material_anti_ooze_retraction_speed="5" -s support_conical_enabled="False" -s extruder_prime_pos_z="0" -s support_tower_roof_angle="65" -s material="0" -s material_bed_temp_prepend="True" -s infill_before_walls="True" -s conical_overhang_angle="50" -s infill_overlap_mm="0.04" -s mesh_position_z="0" -s raft_base_line_width="0.8" -s ironing_enabled="False" -s acceleration_travel="5000" -s support_bottom_material_flow="100" -s acceleration_wall="3000" -s spaghetti_inset="0.2" -s material_flush_purge_length="60" -s raft_interface_line_spacing="1.0" -s machine_nozzle_heat_up_speed="2.0" -s cool_fan_speed_min="100.0" -s wipe_move_distance="20" -s wireframe_flow_connection="100" -s wireframe_roof_inset="3" -s material_anti_ooze_retracted_position="-4" -s jerk_print_layer_0="20" -s min_skin_width_for_expansion="4.898587196589413e-17" -s wireframe_flat_delay="0.1" -s material_diameter="2.85" -s flow_rate_max_extrusion_offset="0" -s support_xy_distance_overhang="0.2" -s minimum_polygon_circumference="1.0" -s machine_steps_per_mm_z="50" -s support_line_distance="2.6666666666666665" -s retraction_enable="True" -s prime_tower_position_x="195.6" -s bridge_wall_min_length="5" -s experimental="0" -s material_break_speed="25" -s support_interface_pattern="concentric" -s bridge_skin_material_flow_3="110" -s bridge_fan_speed_2="0" -s initial_bottom_layers="8" -s mold_roof_height="0.5" -s material_bed_temperature_layer_0="64" -s support_infill_sparse_thickness="0.1" -s support_roof_height="1.2" -s speed_z_hop="10" -s machine_endstop_positive_direction_y="False" -s wireframe_top_delay="0" -s minimum_roof_area="1.0" -s support_conical_min_width="5.0" -s infill_mesh="False" -s layer_height="0.1" -s material_break_preparation_retracted_position="-16" -s material_break_retracted_position="-50" -s material_initial_print_temperature="200" -s resolution="0" -s wireframe_printspeed_up="5" -s raft_jerk="20" -s support_roof_density="100" -s platform_adhesion="0" -s cool_lift_head="False" -s speed_wall_0="30.0" -s machine_extruders_share_heater="False" -s wipe_retraction_prime_speed="25" -s wipe_pause="0" -s wireframe_enabled="False" -s material_linear_advance_factor_topbottom="0" -s machine_settings="0" -s acceleration_topbottom="3000" -s bridge_wall_material_flow="50" -s bottom_skin_preshrink="0.8" -s sub_div_rad_add="0.4" -s top_skin_preshrink="0.8" -s acceleration_roofing="3000" -s retraction_hop_enabled="False" -s switch_extruder_retraction_speed="20" -s extruder_prime_pos_x="0" -s build_volume_temperature="28" -s layer_start_y="0.0" -s support_material_flow="100" -s bridge_fan_speed="100" -s machine_max_jerk_xy="20.0" -s cutting_mesh="False" -s jerk_roofing="20" -s support_bottom_enable="False" -s dual="0" -s wireframe_bottom_delay="0" -s machine_minimum_feedrate="0.0" -s retraction_hop="1" -s jerk_wall_0="20" -s support_roof_extruder_nr="0" -s acceleration_enabled="False" -s machine_max_acceleration_y="9000" -s meshfix="0" -s acceleration_skirt_brim="3000" -s retraction_extra_prime_amount="0" -s magic_spiralize="False" -s magic_fuzzy_skin_outside_only="False" -s infill_line_width="0.4" -s ironing_flow="10.0" -s wall_min_flow="0" -s material_maximum_park_duration="300" -s machine_nozzle_temp_enabled="True" -s skirt_brim_speed="30.0" -s switch_extruder_retraction_amount="16" -s wireframe_up_half_speed="0.3" -s acceleration_wall_0="3000" -s cross_infill_density_image="" -s adaptive_layer_height_variation="0.1" -s infill_wall_line_count="0" -s support_supported_skin_fan_speed="100" -s retraction_count_max="90" -s wireframe_flow="100" -s support_use_towers="True" -s top_thickness="0.8" -s machine_center_is_zero="False" -s machine_end_gcode="" -s connect_skin_polygons="False" -s infill_pattern="grid" -s machine_max_acceleration_z="100" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s skin_edge_support_thickness="0" -s support_wall_count="0" -s raft_base_acceleration="3000" -s wall_extruder_nr="-1" -s support_offset="0" -s material_flow="100" -s wireframe_fall_down="0.5" -s speed_equalize_flow_max="150" -s wall_0_wipe_dist="0.2" -s material_linear_advance_factor_wall_0="0" -s wireframe_top_jump="0.6" -s support_interface_offset="0.0" -s support_tree_enable="False" -s mold_width="5" -s adhesion_extruder_nr="0" -s support_roof_pattern="concentric" -s support_mesh="False" -s prime_tower_line_width="0.4" -s spaghetti_infill_stepped="True" -s machine_max_feedrate_e="299792458000" -s brim_line_count="20" -s support_roof_line_distance="0.4" -s shell="0" -s support_infill_angles="[ ]" -s infill_multiplier="1" -s roofing_line_width="0.4" -s magic_fuzzy_skin_point_dist="0.8" -s bridge_skin_speed_3="15.0" -s filter_out_tiny_gaps="True" -s spaghetti_flow="20" -s machine_heated_build_volume="False" -s wireframe_nozzle_clearance="1" -s speed_infill="60" -s print_sequence="all_at_once" -s skin_overlap="5" -s support_interface_material_flow="100" -s infill_overlap="10" -s wireframe_printspeed_flat="5" -s draft_shield_height_limitation="full" -s bridge_sparse_infill_max_density="0" -s support_bottom_extruder_nr="0" -s mesh_position_x="0" -s prime_tower_position_y="175.6" -s machine_heat_zone_length="16" -s slicing_tolerance="middle" -s jerk_skirt_brim="20" -s speed_topbottom="30.0" -s raft_smoothing="5" -s wall_line_count="2" -s gradual_infill_steps="0" -s machine_show_variants="False" -s support_mesh_drop_down="True" -s extruders_enabled_count="1" -s skirt_brim_line_width="0.4" -s top_bottom_pattern="lines" -s cool_fan_full_layer="2" -s material_print_temperature="210" -s nozzle_disallowed_areas="[]" -s support_tower_maximum_supported_diameter="3.0" -s support_interface_extruder_nr="0" -s travel_avoid_distance="0.625" -s raft_interface_speed="22.5" -s raft_base_line_spacing="1.6" -s max_extrusion_before_wipe="10" -s speed_support_infill="60" -s meshfix_maximum_travel_resolution="0.8" -s support_extruder_nr_layer_0="0" -s infill_support_enabled="False" -s cool_fan_speed_0="0" -s blackmagic="0" -s support_brim_line_count="20" -s travel_compensate_overlapping_walls_x_enabled="True" -s bridge_skin_speed="15.0" -s skirt_brim_material_flow="100" -s material_break_preparation_temperature="210" -s wireframe_strategy="compensate" -s wireframe_roof_fall_down="2" -s machine_gcode_flavor="RepRap (Marlin/Sprinter)" -s wireframe_printspeed_bottom="5" -s outer_inset_first="False" -s prime_tower_brim_enable="False" -s raft_surface_line_spacing="0.4" -s material_no_load_move_factor="0.940860215" -s roofing_pattern="lines" -s machine_buildplate_type="glass" -s time="17:42:55" -s wipe_hop_amount="1" -s support_join_distance="2.0" -s smooth_spiralized_contours="True" -s z_seam_relative="False" -s cross_support_density_image="" -s wireframe_height="3" -s z_seam_type="sharpest_corner" -s material_linear_advance_factor_prime_tower="0" -s retraction_prime_speed="25" -s cool_min_speed="10" -s cool_fan_speed_max="100.0" -s wall_overhang_angle="90" -s cool_fan_enabled="True" -s machine_nozzle_expansion_angle="45" -s spaghetti_infill_extra_volume="0" -s support_connect_zigzags="True" -s adaptive_layer_height_enabled="False" -s travel_compensate_overlapping_walls_enabled="True" -s spaghetti_infill_enabled="False" -s infill_mesh_order="0" -s support="0" -s jerk_wall_x="20" -s raft_speed="30.0" -s mold_angle="40" -s machine_nozzle_head_distance="3" -s travel_avoid_supports="False" -s acceleration_infill="3000" -s bridge_skin_density_3="80" -s support_interface_enable="False" -s material_linear_advance_factor_infill="0" -s ironing_inset="0.2" -s bridge_fan_speed_3="0" -s wireframe_roof_outer_delay="0.2" -s top_bottom_pattern_0="lines" -s alternate_extra_perimeter="False" -s support_roof_enable="True" -s top_skin_expand_distance="0.8" -s acceleration_ironing="3000" -s prime_tower_flow="100" -s date="11-03-2020" -s wipe_hop_speed="10" -s extruder_prime_pos_abs="False" -s material_adhesion_tendency="10" -s layer_0_z_overlap="0.15" -s ironing_pattern="zigzag" -s wireframe_roof_drag_along="0.8" -s acceleration_support_bottom="3000" -s material_break_preparation_speed="2" -s material_end_of_filament_purge_length="20" -s speed_print="60" -s machine_extruder_count="1" -s jerk_support_roof="20" -s retraction_retract_speed="25" -s print_temperature="210" -s relative_extrusion="False" -s wall_0_inset="0" -s brim_width="8.0" -s speed_equalize_flow_enabled="False" -s xy_offset_layer_0="0" -s jerk_print="20" -s print_bed_temperature="64" -s retraction_combing_max_distance="0" -s z_seam_x="100.0" -s draft_shield_height="10" -s wipe_retraction_extra_prime_amount="0" -s skin_preshrink="0.8" -s clean_between_layers="False" -s alternate_carve_order="True" -s machine_max_feedrate_y="299792458000" -s support_roof_material_flow="100" -s raft_base_jerk="20" -s speed_wall_x="60.0" -s wipe_retraction_retract_speed="25" -s multiple_mesh_overlap="0.15" -s support_bottom_density="100" -s skin_material_flow="100" -s raft_interface_jerk="20" -s material_shrinkage_percentage="0" -s machine_nozzle_size="0.4" -s default_material_print_temperature="210" -s speed_slowdown_layers="2" -s support_xy_overrides_z="z_overrides_xy" -s machine_nozzle_tip_outer_diameter="1" -s min_infill_area="0" -s ironing_only_highest_layer="False" -s expand_skins_expand_distance="0.8" -s raft_airgap="0.3" -s material_flush_purge_speed="0.5" -s limit_support_retractions="True" -s speed_ironing="20.0" -s raft_interface_thickness="0.15000000000000002" -s infill_offset_y="0" -s magic_fuzzy_skin_thickness="0.3" -s meshfix_extensive_stitching="False" -s conical_overhang_enabled="False" -s speed_travel_layer_0="60.0" -s raft_surface_speed="30.0" -s z_seam_position="back" -s mold_enabled="False" -s jerk_travel_layer_0="30.0" -s skin_edge_support_layers="0" -s support_type="buildplate" -s wall_0_material_flow="100" -s bridge_skin_support_threshold="50" -s material_bed_temperature="64" -s prime_tower_min_volume="6" -s jerk_wall="20" -s flow_rate_extrusion_offset_factor="100" -s acceleration_wall_x="3000" -s carve_multiple_volumes="False" -s retraction_hop_after_extruder_switch="True" -s support_top_distance="0.1" -s jerk_support="20" -s wall_line_width_x="0.4" -s raft_base_thickness="0.36" -s adhesion_z_offset_extensive_processing="False" -s machine_max_jerk_z="0.4" -s support_tree_angle="40" -s wipe_retraction_enable="True" -s day="Wed" -s support_tree_branch_diameter_angle="5" -s bridge_skin_density_2="75" -s retraction_amount="6.5" -s wipe_retraction_speed="25" -s support_tower_diameter="3.0" -s speed_support_bottom="40.0" -s switch_extruder_retraction_speeds="20" -s machine_firmware_retract="False" -s material_linear_advance_factor_skirt_brim="0" -s layer_height_0="0.3" -s support_bottom_offset="0.0" -s bridge_wall_speed="15.0" -s raft_acceleration="3000" -s support_bottom_height="1" -s wall_0_extruder_nr="-1" -s infill_line_distance="4.0" -s minimum_bottom_area="1.0" -s minimum_support_area="0.0" -s prime_tower_enable="False" -s material_linear_advance_factor_wall="0" -s coasting_min_volume="0.8" -s cool_fan_speed="100.0" -s machine_max_feedrate_x="299792458000" -s machine_width="200" -s prime_tower_size="20" -s jerk_topbottom="20" -s remove_empty_first_layers="True" -s material_linear_advance_factor_support="0" -s machine_nozzle_cool_down_speed="2.0" -s coasting_volume="0.064" -s machine_endstop_positive_direction_z="True" -s small_feature_speed_factor_0="50" -s machine_heated_bed="True" -s machine_use_extruder_offset_to_offset_coords="True" -s small_feature_speed_factor="50" -s machine_name="Wanhao Duplicator i3 Plus" -s raft_base_speed="22.5" -s support_angle="70" -s top_bottom_thickness="0.8" -s machine_steps_per_mm_x="50" -s material_surface_energy="100" -s gantry_height="180" -s skirt_brim_minimal_length="250" -s raft_surface_layers="2" -s infill_extruder_nr="-1" -s infill_sparse_density="20" -s material_crystallinity="False" -s wall_thickness="0.8" -s machine_steps_per_mm_e="1600" -s support_bottom_distance="0" -s jerk_support_interface="20" -s skin_outline_count="1" -s jerk_prime_tower="20" -s jerk_travel="30" -s meshfix_keep_open_polygons="False" -s prime_blob_enable="False" -s support_brim_enable="False" -s cool_fan_full_at_height="0.3" -s machine_endstop_positive_direction_x="False" -s ooze_shield_angle="60" -s small_feature_max_length="0.0" -s skin_overlap_mm="0.02" -s bottom_thickness="0.8" -s adhesion_z_offset="0" -s speed_support="60" -s support_bottom_line_distance="0.4" -s wipe_repeat_count="5" -s meshfix_maximum_resolution="0.5" -s gradual_support_infill_step_height="1" -s acceleration_prime_tower="3000" -s skirt_gap="3" -s support_bottom_angles="[ ]" -s speed_support_roof="40.0" -s support_interface_line_width="0.4" -s travel_compensate_overlapping_walls_0_enabled="True" -s acceleration_print_layer_0="3000" -s travel_avoid_other_parts="True" -s cross_infill_pocket_size="4.0" -s wall_line_width_0="0.4" -s material_final_print_temperature="195" -s bottom_skin_expand_distance="0.8" -s anti_overhang_mesh="False" -s material_linear_advance_factor="0" -s cool_min_layer_time="5" -s infill_material_flow="100" -s jerk_infill="20" -s wipe_hop_enable="False" -s zig_zaggify_support="False" -s machine_depth="200" -s material_bed_temp_wait="True" -s machine_max_acceleration_x="9000" -s speed_support_interface="40.0" -s bridge_skin_material_flow_2="100" -s support_bottom_pattern="concentric" -s material_linear_advance_factor_wall_x="0" -s acceleration_print="3000" -s bridge_skin_speed_2="15.0" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s meshfix_maximum_deviation="0.05" -s connect_infill_polygons="False" -s speed_print_layer_0="30.0" -s wireframe_flow_flat="100" -s wipe_brush_pos_x="100" -s machine_nozzle_id="unknown" -s acceleration_travel_layer_0="5000.0" -s wipe_retraction_amount="6.5" -s material_break_temperature="50" -s top_bottom_extruder_nr="-1" -s wireframe_printspeed_down="5" -s material_print_temp_prepend="True" -s support_infill_rate="15" -s support_zag_skip_count="8" -s fill_outline_gaps="False" -s material_print_temp_wait="True" -s support_roof_angles="[ ]" -s jerk_support_infill="20" -s wall_overhang_speed_factor="100" -s support_interface_skip_height="0.3" -s support_extruder_nr="0" -s jerk_enabled="False" -s magic_fuzzy_skin_enabled="False" -s support_line_width="0.4" -s ooze_shield_enabled="False" -s support_skip_some_zags="False" -s support_interface_density="100" -s wireframe_straight_before_down="20" -s speed_prime_tower="60" -s infill="0" -s coasting_speed="90" -e0 -s speed_travel="150" -s support_initial_layer_line_distance="2.6666666666666665" -s mesh_position_y="0" -s command_line_settings="0" -s raft_margin="15" -s spaghetti_infill_stepped="True" -s raft_surface_acceleration="3000" -s raft_interface_line_width="0.8" -s wall_line_width="0.4" -s infill_wipe_dist="0.1" -s small_hole_max_size="0" -s wall_min_flow_retract="False" -s raft_surface_jerk="20" -s support_conical_angle="30" -s z_seam_relative="False" -s cross_support_density_image="" -s minimum_interface_area="1.0" -s fill_perimeter_gaps="everywhere" -s raft_interface_acceleration="3000" -s resolution="0" -s roofing_angles="[ ]" -s raft_surface_fan_speed="0" -s support_roof_pattern="concentric" -s support_bottom_stair_step_width="5.0" -s support_tree_branch_distance="1" -s speed_support_roof="40.0" -s extruder_prime_pos_y="0" -s coasting_enable="False" -s zig_zaggify_infill="False" -s meshfix_union_all_remove_holes="False" -s material_flow_dependent_temperature="False" -s bottom_layers="6" -s bridge_wall_coast="100" -s material_linear_advance_factor_support_interface="0" -s infill_randomize_start_location="False" -s support_bottom_line_width="0.4" -s brim_replaces_support="True" -s jerk_support_bottom="20" -s bridge_skin_density_3="80" -s support_interface_enable="False" -s bridge_enable_more_layers="True" -s retraction_speed="65" -s support_interface_height="1" -s bridge_skin_material_flow="60" -s support_brim_width="8.0" -s support_roof_line_width="0.4" -s infill_support_angle="40" -s machine_extruder_start_pos_abs="False" -s skin_no_small_gaps_heuristic="False" -s machine_nozzle_offset_x="0" -s support_interface_angles="[ ]" -s raft_interface_fan_speed="0" -s switch_extruder_retraction_speeds="20" -s z_seam_corner="z_seam_corner_inner" -s z_seam_y="200" -s material_linear_advance_factor_wall_0="0" -s wall_0_wipe_dist="0.2" -s travel="0" -s raft_base_fan_speed="0" -s support_tree_collision_resolution="0.2" -s support_bottom_stair_step_height="0.3" -s speed_roofing="30.0" -s cool_fan_speed_0="0" -s blackmagic="0" -s support_brim_line_count="20" -s infill_support_enabled="False" -s support_roof_offset="0.0" -s acceleration_support_roof="3000" -s cool_min_layer_time_fan_speed_max="10" -s bridge_skin_material_flow_3="110" -s bridge_fan_speed_2="0" -s initial_bottom_layers="6" -s support_interface_pattern="concentric" -s raft_surface_layers="2" -s skirt_brim_minimal_length="250" -s acceleration_support_infill="3000" -s brim_gap="0" -s coasting_min_volume="0.8" -s material_linear_advance_factor_wall="0" -s jerk_ironing="20" -s material_print_temperature_layer_0="220" -s raft_base_acceleration="3000" -s roofing_material_flow="100" -s prime_tower_wipe_enabled="True" -s skin_line_width="0.4" -s retraction_hop_enabled="False" -s switch_extruder_retraction_speed="20" -s acceleration_roofing="3000" -s raft_smoothing="5" -s speed_topbottom="30.0" -s cooling="0" -s retraction_hop_only_when_collides="False" -s machine_feeder_wheel_diameter="10.0" -s material_end_of_filament_purge_speed="0.5" -s top_layers="6" -s switch_extruder_extra_prime_amount="0" -s jerk_layer_0="20" -s material_guid="0ff92885-617b-4144-a03c-9989872454bc" -s max_skin_angle_for_expansion="90" -s acceleration_infill="3000" -s travel_avoid_supports="False" -s support_offset="0" -s material_flow="100" -s material_crystallinity="False" -s machine_steps_per_mm_e="1600" -s support_bottom_distance="0" -s wall_thickness="0.8" -s cool_min_layer_time="5" -s material_linear_advance_factor="0" -s mold_angle="40" -s raft_speed="30.0" -s jerk_wall_0="20" -s retraction_hop="1" -s optimize_wall_printing_order="False" -s zig_zaggify_support="False" -s wipe_hop_enable="False" -s line_width="0.4" -s machine_extruder_end_pos_x="0" -s support_tower_diameter="3.0" -s machine_extruder_start_pos_x="0" -s support_infill_angles="[ ]" -s shell="0" -s jerk_topbottom="20" -s acceleration_layer_0="3000" -s retraction_min_travel="0.8" -s wipe_retraction_amount="2.5" -s material_break_temperature="50" -s spaghetti_max_infill_angle="10" -s acceleration_support_interface="3000" -s machine_steps_per_mm_y="50" -s support_tree_branch_diameter="2" -s speed="0" -s xy_offset="0" -s material_standby_temperature="175" -s brim_outside_only="True" -s bridge_skin_speed_3="15.0" -s filter_out_tiny_gaps="True" -s magic_fuzzy_skin_point_dist="0.8" -s spaghetti_flow="20" -s acceleration_support="3000" -s retraction_hop_after_extruder_switch_height="1" -s machine_extruder_end_pos_abs="False" -s infill_angles="[ ]" -s support_xy_distance="0.7" -s speed_wall="30.0" -s material_anti_ooze_retraction_speed="5" -s support_conical_enabled="False" -s extruder_prime_pos_z="0" -s support_tower_roof_angle="65" -s support_z_distance="0.1" -s meshfix_union_all="True" -s material="0" -s infill_before_walls="True" -s conical_overhang_angle="50" -s infill_overlap_mm="0" -s mesh_position_z="0" -s raft_fan_speed="0" -s magic_mesh_surface_mode="normal" -s z_seam_type="random" -s retraction_prime_speed="65" -s material_linear_advance_factor_prime_tower="0" -s acceleration_travel="5000" -s ironing_enabled="False" -s support_bottom_material_flow="100" -s acceleration_wall="3000" -s spaghetti_inset="0.2" -s material_flush_purge_length="60" -s raft_interface_line_spacing="1.0" -s machine_nozzle_heat_up_speed="2.0" -s bridge_fan_speed_3="0" -s ironing_inset="0.2" -s cool_fan_speed_min="80" -s wipe_move_distance="20" -s skin_overlap_mm="0.02" -s small_feature_max_length="0.0" -s material_anti_ooze_retracted_position="-4" -s jerk_print_layer_0="20" -s wall_x_material_flow="100" -s min_skin_width_for_expansion="3.67394039744206e-17" -s support_xy_distance_overhang="0.2" -s skin_angles="[ ]" -s machine_steps_per_mm_z="50" -s support_line_distance="2.6666666666666665" -s retraction_enable="True" -s experimental="0" -s top_thickness="0.8" -s speed_wall_0="30.0" -s cool_lift_head="False" -s material_break_speed="25" -s meshfix_extensive_stitching="False" -s magic_fuzzy_skin_thickness="0.3" -s material_break_retracted_position="-50" -s material_initial_print_temperature="210" -s mold_roof_height="0.5" -s support_infill_sparse_thickness="0.1" -s support_roof_height="1.2" -s speed_z_hop="10" -s gradual_infill_steps="0" -s material_break_preparation_retracted_position="-16" -s support_supported_skin_fan_speed="100" -s infill_wall_line_count="0" -s speed_print_layer_0="12" -s raft_jerk="20" -s spaghetti_max_height="2.0" -s support_roof_density="100" -s platform_adhesion="0" -s bridge_skin_density="100" -s raft_base_line_width="0.8" -s machine_nozzle_offset_y="0" -s wipe_retraction_prime_speed="65" -s wipe_pause="0" -s material_linear_advance_factor_topbottom="0" -s machine_settings="0" -s acceleration_topbottom="3000" -s bridge_wall_material_flow="50" -s bottom_skin_preshrink="1.6" -s sub_div_rad_add="0.4" -s top_skin_preshrink="1.6" -s wall_overhang_speed_factor="100" -s jerk_support_infill="20" -s switch_extruder_prime_speed="20" -s extruder_prime_pos_x="0" -s layer_start_y="0.0" -s support_material_flow="100" -s bridge_fan_speed="100" -s jerk_roofing="20" -s support_bottom_enable="False" -s dual="0" -s support_interface_offset="0.0" -s meshfix="0" -s acceleration_skirt_brim="3000" -s retraction_extra_prime_amount="0" -s initial_layer_line_width_factor="100.0" -s magic_fuzzy_skin_outside_only="False" -s infill_line_width="0.4" -s ironing_flow="10.0" -s wall_min_flow="0" -s material_maximum_park_duration="300" -s skirt_brim_speed="12" -s machine_nozzle_temp_enabled="True" -s switch_extruder_retraction_amount="16" -s acceleration_wall_0="3000" -s support_bottom_line_distance="0.4" -s skirt_line_count="4" -s retraction_count_max="90" -s support_connect_zigzags="True" -s spaghetti_infill_extra_volume="0" -s support_use_towers="True" -s material_diameter="1.75" -s wall_material_flow="100" -s material_flow_layer_0="100" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s skin_edge_support_thickness="0" -s support_wall_count="0" -s jerk_travel="30" -s material_linear_advance_factor_skirt_brim="0" -s speed_equalize_flow_max="150" -s material_flush_purge_speed="0.5" -s raft_airgap="0.3" -s support_interface_skip_height="0.3" -s mold_width="5" -s cross_infill_density_image="" -s raft_base_speed="22.5" -s support_angle="70" -s top_bottom_thickness="0.8" -s support_conical_min_width="5.0" -s machine_nozzle_cool_down_speed="2.0" -s skirt_brim_material_flow="100" -s bridge_skin_speed="15.0" -s prime_tower_line_width="0.4" -s brim_line_count="20" -s support_roof_line_distance="0.4" -s center_object="False" -s top_bottom_pattern="lines" -s cool_fan_full_layer="2" -s skirt_brim_line_width="0.4" -s speed_infill="60" -s skin_overlap="5" -s bridge_sparse_infill_max_density="0" -s travel_compensate_overlapping_walls_x_enabled="True" -s machine_heat_zone_length="16" -s machine_extruder_end_pos_y="0" -s slicing_tolerance="exclusive" -s jerk_skirt_brim="20" -s retraction_combing_max_distance="0" -s z_seam_x="100.0" -s infill_line_distance="2.0" -s minimum_bottom_area="1.0" -s roofing_line_width="0.4" -s material_print_temperature="220" -s travel_avoid_distance="0.625" -s raft_interface_speed="22.5" -s raft_base_line_spacing="1.6" -s max_extrusion_before_wipe="10" -s speed_support_infill="60" -s machine_extruder_start_code="" -s connect_infill_polygons="False" -s raft_surface_line_width="0.4" -s infill_pattern="concentric" -s connect_skin_polygons="False" -s material_break_preparation_temperature="220" -s raft_surface_line_spacing="0.4" -s material_no_load_move_factor="0.940860215" -s wipe_hop_amount="1" -s support_join_distance="2.0" -s cool_min_speed="10" -s cool_fan_speed_max="80" -s wall_overhang_angle="90" -s cool_fan_enabled="True" -s speed_prime_tower="60" -s coasting_speed="90" -s infill="0" -s travel_compensate_overlapping_walls_enabled="True" -s spaghetti_infill_enabled="False" -s support="0" -s jerk_wall_x="20" -s wipe_brush_pos_x="100" -s acceleration_travel_layer_0="5000.0" -s machine_nozzle_id="unknown" -s raft_surface_thickness="0.1" -s cool_fan_speed="80" -s machine_nozzle_head_distance="3" -s machine_nozzle_size="0.4" -s raft_interface_jerk="20" -s material_shrinkage_percentage="0" -s material_linear_advance_factor_infill="0" -s top_bottom_pattern_0="lines" -s alternate_extra_perimeter="False" -s support_roof_enable="True" -s top_skin_expand_distance="1.6" -s acceleration_ironing="3000" -s prime_tower_flow="100" -s wipe_hop_speed="10" -s acceleration_support_bottom="3000" -s material_break_preparation_speed="2" -s material_end_of_filament_purge_length="20" -s speed_print="60" -s minimum_roof_area="1.0" -s machine_extruder_cooling_fan_number="0" -s meshfix_maximum_travel_resolution="0.8" -s machine_endstop_positive_direction_y="False" -s jerk_support_roof="20" -s retraction_retract_speed="65" -s wall_0_inset="0" -s brim_width="8.0" -s layer_0_z_overlap="0.15" -s ironing_pattern="zigzag" -s speed_equalize_flow_enabled="False" -s xy_offset_layer_0="0" -s jerk_print="20" -s gradual_support_infill_steps="0" -s wipe_retraction_extra_prime_amount="0" -s skin_preshrink="1.6" -s clean_between_layers="False" -s support_roof_material_flow="100" -s retract_at_layer_change="False" -s raft_base_jerk="20" -s speed_wall_x="60.0" -s wipe_retraction_retract_speed="65" -s multiple_mesh_overlap="0.15" -s support_bottom_density="100" -s skin_material_flow="100" -s limit_support_retractions="True" -s speed_ironing="20.0" -s infill_overlap="14" -s support_interface_material_flow="100" -s extruder_nr="0" -s roofing_pattern="lines" -s conical_overhang_enabled="False" -s speed_travel_layer_0="30.0" -s wall_0_material_flow="100" -s jerk_wall="20" -s bridge_skin_support_threshold="50" -s prime_tower_min_volume="6" -s retraction_hop_after_extruder_switch="True" -s support_top_distance="0.1" -s jerk_support="20" -s wall_line_width_x="0.4" -s raft_base_thickness="0.36" -s gradual_infill_step_height="1.5" -s outer_inset_first="False" -s material_adhesion_tendency="0" -s extruder_prime_pos_abs="False" -s support_tower_maximum_supported_diameter="3.0" -s support_tree_angle="40" -s bridge_skin_density_2="75" -s retraction_amount="2.5" -s wipe_retraction_speed="65" -s material_extrusion_cool_down_speed="0.7" -s speed_support_bottom="40.0" -s support_bottom_offset="0.0" -s bridge_wall_speed="15.0" -s raft_acceleration="3000" -s support_bottom_height="1" -s support_tree_branch_diameter_angle="5" -s infill_sparse_thickness="0.1" -s ironing_line_spacing="0.1" -s ironing_only_highest_layer="False" -s minimum_support_area="0.0" -s mesh_position_x="0" -s expand_skins_expand_distance="1.6" -s material_linear_advance_factor_support="0" -s skirt_gap="3" -s acceleration_prime_tower="3000" -s jerk_infill="20" -s small_feature_speed_factor="50" -s support_pattern="lines" -s support_xy_overrides_z="z_overrides_xy" -s min_infill_area="0" -s machine_nozzle_tip_outer_diameter="1" -s coasting_volume="0.064" -s machine_endstop_positive_direction_z="True" -s small_feature_speed_factor_0="50" -s infill_sparse_density="20" -s jerk_support_interface="20" -s skin_outline_count="1" -s jerk_prime_tower="20" -s meshfix_keep_open_polygons="False" -s prime_blob_enable="False" -s support_brim_enable="False" -s cool_fan_full_at_height="0.3" -s wipe_repeat_count="5" -s meshfix_maximum_resolution="0.5" -s gradual_support_infill_step_height="1" -s support_roof_angles="[ ]" -s speed_support="60" -s bottom_skin_expand_distance="1.6" -s travel_compensate_overlapping_walls_0_enabled="True" -s skin_edge_support_layers="0" -s acceleration_print_layer_0="3000" -s travel_avoid_other_parts="True" -s cross_infill_pocket_size="2.0" -s wall_line_width_0="0.4" -s acceleration_print="3000" -s material_linear_advance_factor_wall_x="0" -s machine_endstop_positive_direction_x="False" -s material_final_print_temperature="205" -s infill_material_flow="100" -s support_skip_zag_per_mm="20" -s support_bottom_angles="[ ]" -s support_interface_line_width="0.4" -s speed_support_interface="40.0" -s bridge_skin_material_flow_2="100" -s raft_interface_thickness="0.15000000000000002" -s bridge_skin_speed_2="15.0" -s infill_multiplier="1" -s infill_offset_y="0" -s magic_fuzzy_skin_enabled="False" -s support_skip_some_zags="False" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s machine_extruder_end_code="" -s meshfix_maximum_deviation="0.05" -s layer_start_x="0.0" -s machine_min_cool_heat_time_window="50.0" -s machine_steps_per_mm_x="50" -s magic_fuzzy_skin_point_density="1.25" -s wall_line_count="4" -s support_infill_rate="15" -s machine_filament_park_distance="16" -s support_zag_skip_count="8" -s fill_outline_gaps="False" -s support_bottom_pattern="concentric" -s acceleration_wall_x="3000" -s bottom_thickness="0.8" -s mold_enabled="False" -s jerk_travel_layer_0="30.0" -s support_interface_density="100" -s support_line_width="0.4" -s wipe_retraction_enable="True" -s infill_enable_travel_optimization="False" -s speed_layer_0="12" -s raft_surface_speed="30.0" -s z_seam_position="back" -s roofing_layer_count="0" -s default_material_print_temperature="200" -s retraction_extrusion_window="2.5" -s support_fan_enable="False" -s machine_extruder_start_pos_y="0" -s infill_offset_x="0" -s material_surface_energy="100" -g -e0 -l "0" -s extruder_nr="0"
2020-03-11 17:43:01,675 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-03-11 17:43:02,034 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 217 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-11 17:43:02,401 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-11 17:43:02,405 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-11 17:43:02,441 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [663]: Slicing took 7.079931020736694 seconds
2020-03-11 17:43:02,442 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [664]: Number of models per buildplate: {0: 1}
2020-03-11 17:43:02,442 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [678]: See if there is more to slice...
2020-03-11 17:43:02,528 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [181]: Socket state changed to Closing
2020-03-11 17:43:02,537 - DEBUG - [MainThread] UM.Backend.Backend._onSocketError [203]: Socket debug: Arcus Error (13): Closing socket because other side requested close.
2020-03-11 17:43:02,537 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onBackendQuit [829]: Backend quit with return code 0. Resetting process and socket.
2020-03-11 17:43:02,542 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [183]: Socket state changed to Closed
2020-03-11 17:44:18,416 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.disconnect [315]: Connection with instance OrangeLeader with url http://192.168.2.171:5002/ stopped
2020-03-11 17:44:18,442 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-11 17:44:18,449 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device OrangeLeader already added
2020-03-11 17:44:18,451 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [303]: Connection with instance OrangeLeader with url http://192.168.2.171:5002/ started
2020-03-11 17:44:18,460 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/Resources/qml/UM/Dialog.qml:86:13: QML Loader: Binding loop detected for property "active"
2020-03-11 17:44:19,044 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [215]: Trying to access OctoPrint instance at http://192.168.2.171:5002/ with the provided API key.
2020-03-11 17:44:30,392 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.disconnect [315]: Connection with instance OrangeLeader with url http://192.168.2.171:5002/ stopped
2020-03-11 17:44:30,405 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/DiscoverOctoPrintAction.qml:522: TypeError: Cannot call method 'getId' of undefined
2020-03-11 17:44:30,415 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-11 17:44:30,420 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device OrangeLeader already added
2020-03-11 17:44:30,421 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [303]: Connection with instance OrangeLeader with url http://192.168.2.171:5002/ started
2020-03-11 17:44:30,954 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [215]: Trying to access OctoPrint instance at http://192.168.2.171:5002/ with the provided API key.
2020-03-11 17:44:40,680 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-03-11 17:44:48,135 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [215]: Trying to access OctoPrint instance at http://192.168.2.171:5002/ with the provided API key.
2020-03-11 17:45:02,286 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.disconnect [315]: Connection with instance OrangeLeader with url http://192.168.2.171:5002/ stopped
2020-03-11 17:45:02,298 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/DiscoverOctoPrintAction.qml:522: TypeError: Cannot call method 'getId' of undefined
2020-03-11 17:45:02,811 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/DiscoverOctoPrintAction.qml:373: TypeError: Cannot read property 'baseURL' of undefined
2020-03-11 17:45:12,679 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-03-11 17:45:27,839 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-11 17:45:27,844 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device OrangeLeader already added
2020-03-11 17:45:27,845 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [303]: Connection with instance OrangeLeader with url http://192.168.2.172:5002/ started
2020-03-11 17:45:27,879 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device OrangeLeader already added
2020-03-11 17:45:27,968 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-11 17:45:28,384 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [215]: Trying to access OctoPrint instance at http://192.168.2.172:5002/ with the provided API key.
2020-03-11 17:45:33,093 - WARNING - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [371]: Start polling for AppKeys decision
2020-03-11 17:45:37,682 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-03-11 17:45:37,735 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-11 17:45:46,334 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [396]: AppKey granted
2020-03-11 17:45:47,714 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-11 17:45:57,720 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-11 17:46:01,739 - DEBUG - [MainThread] cura.TaskManagement.OnExitCallbackManager.triggerNextCallback [51]: No more on-app-exit callbacks to process. Tell the app to exit.
2020-03-11 17:46:01,744 - INFO - [MainThread] cura.CuraApplication.closeApplication [592]: Close application
2020-03-11 17:46:01,753 - DEBUG - [MainThread] UM.Qt.QtApplication.windowClosed [462]: Shutting down cura
2020-03-11 17:46:01,788 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._terminate [292]: Attempting to kill the engine process
2020-03-11 17:48:36,991 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin FileLogger
2020-03-11 17:48:36,997 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin LegacyProfileReader
2020-03-11 17:48:37,002 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin AMFReader
2020-03-11 17:48:37,009 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin SimpleView
2020-03-11 17:48:37,015 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin SolidView
2020-03-11 17:48:37,024 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin FirmwareUpdateChecker
2020-03-11 17:48:37,031 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin SentryLogger
2020-03-11 17:48:37,038 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin SupportEraser
2020-03-11 17:48:37,044 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin PrepareStage
2020-03-11 17:48:37,097 - WARNING - [MainThread] UM.PluginRegistry.loadPlugin [412]: Plugin [CuraInventorPlugin] with supported sdk versions [['5.0.0', '6.0.0', '6.1.0', '5.0.0']] is incompatible with the current sdk version [7.1.0].
2020-03-11 17:48:37,105 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin LinearAdvanceSettingPlugin
2020-03-11 17:48:37,110 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin VersionInTitlebarPlugin
2020-03-11 17:48:37,117 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin OrientationPlugin
2020-03-11 17:48:37,132 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin OctoPrintPlugin
2020-03-11 17:48:37,140 - DEBUG - [MainThread] SidebarGUIPlugin.__matchVersion [48]: This version of the plugin is not compatible with this version of Cura. Please check for an update.
2020-03-11 17:48:37,140 - WARNING - [MainThread] SidebarGUIPlugin.register [23]: Plugin not loaded because of a version mismatch
2020-03-11 17:48:37,143 - WARNING - [MainThread] UM.PluginRegistry.loadPlugin [419]: Plugin SidebarGUIPlugin did not return any objects to register
2020-03-11 17:48:37,150 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin MeshTools
2020-03-11 17:48:37,156 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin ZOffsetPlugin
2020-03-11 17:48:37,162 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin CustomSupports
2020-03-11 17:48:37,171 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin MaterialSettingsPlugin
2020-03-11 17:48:37,173 - DEBUG - [MainThread] UM.PluginRegistry.loadPlugins [369]: Loading all plugins took 0.9403910636901855 seconds
2020-03-11 17:48:37,198 - INFO - [MainThread] UM.VersionUpgradeManager.upgrade [148]: Looking for old configuration files to upgrade.
2020-03-11 17:48:37,299 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-11 17:48:37,303 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-11 17:48:37,306 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-11 17:48:37,310 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-11 17:48:37,313 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-11 17:48:37,316 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-11 17:48:37,319 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-11 17:48:37,323 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-11 17:48:37,326 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-11 17:48:37,329 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-11 17:48:37,332 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-11 17:48:37,335 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-11 17:48:37,338 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-11 17:48:37,433 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ../3D4MakersFacilanC8/3d4makers_facilan_c8.xml.fdm_material, skip it
2020-03-11 17:48:41,214 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.loadAllMetadata [330]: Loading metadata into container registry took 3.6327381134033203 seconds
2020-03-11 17:48:41,383 - DEBUG - [MainThread] cura.Scene.CuraSceneController.setActiveBuildPlate [111]: Select build plate: 0
2020-03-11 17:48:41,390 - INFO - [MainThread] cura.CuraApplication.run [761]: Initializing machine error checker
2020-03-11 17:48:41,462 - INFO - [MainThread] cura.UI.MachineActionManager.addDefaultMachineActions [72]: Default machine actions added for machine definition [wanhao_i3plus]
2020-03-11 17:48:41,792 - INFO - [MainThread] cura.Settings.GlobalStack.addExtruder [184]: Extruder[wanhao_i3plus_extruder_0 #2] added to [Wanhao Duplicator i3 Plus] at position [0]
2020-03-11 17:48:41,794 - WARNING - [MainThread] cura.Settings.ExtruderManager.registerExtruder [156]: Extruder [wanhao_i3plus_extruder_0 #2] has already been registered on machine [Wanhao Duplicator i3 Plus], not doing anything
2020-03-11 17:48:41,795 - INFO - [MainThread] FirmwareUpdateChecker.FirmwareUpdateChecker.checkFirmwareVersion [74]: No machine with name Wanhao Duplicator i3 Plus in list of firmware to check.
2020-03-11 17:48:41,953 - DEBUG - [MainThread] cura.Machines.ContainerTree.__getitem__ [106]: Adding container tree for wanhao_i3plus took 0.13651704788208008 seconds.
2020-03-11 17:48:41,957 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: BQ_PauseAtHeight
2020-03-11 17:48:41,959 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: ChangeAtZ
2020-03-11 17:48:41,960 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: ColorMix
2020-03-11 17:48:41,961 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: DisplayFilenameAndLayerOnLCD
2020-03-11 17:48:41,962 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: DisplayRemainingTimeOnLCD
2020-03-11 17:48:41,963 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: FilamentChange
2020-03-11 17:48:41,963 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: InsertAtLayerChange
2020-03-11 17:48:41,964 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: PauseAtHeight
2020-03-11 17:48:41,965 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: PauseAtHeightRepRapFirmwareDuet
2020-03-11 17:48:41,966 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: PauseAtHeightforRepetier
2020-03-11 17:48:41,967 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: RetractContinue
2020-03-11 17:48:41,967 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: SearchAndReplace
2020-03-11 17:48:41,968 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: Stretch
2020-03-11 17:48:41,969 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: TimeLapse
2020-03-11 17:48:41,970 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: UsePreviousProbeMeasurements
2020-03-11 17:48:42,085 - INFO - [MainThread] cura.CuraApplication.run [766]: Initializing machine manager
2020-03-11 17:48:42,101 - INFO - [MainThread] cura.CuraApplication.run [771]: Initializing container manager
2020-03-11 17:48:42,238 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-11 17:48:42,254 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [303]: Connection with instance OrangeLeader with url http://192.168.2.172:5002/ started
2020-03-11 17:48:42,287 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device OrangeLeader already added
2020-03-11 17:48:42,296 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-11 17:48:42,317 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [135]: New error check scheduled.
2020-03-11 17:48:42,345 - DEBUG - [MainThread] UM.Scene.Camera._preferencesChanged [246]: Changing perspective mode to perspective.
2020-03-11 17:48:42,740 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [158]: Loading theme file: /Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/themes/cura-dark/theme.json
2020-03-11 17:48:42,744 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [158]: Loading theme file: /Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/themes/cura-light/theme.json
2020-03-11 17:48:42,946 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [231]: Loaded theme /Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/themes/cura-light
2020-03-11 17:48:42,950 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [231]: Loaded theme /Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/themes/cura-dark
2020-03-11 17:48:43,412 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin._createView [304]: Creating post processing plugin view.
2020-03-11 17:48:43,534 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin._createView [314]: Post processing view created.
2020-03-11 17:48:43,813 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._parseJWT [91]: There was no auth data or access token
2020-03-11 17:48:43,815 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._parseJWT [91]: There was no auth data or access token
2020-03-11 17:48:43,818 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._parseJWT [91]: There was no auth data or access token
2020-03-11 17:48:43,821 - WARNING - [MainThread] UM.Qt.Bindings.Theme.getImage [133]: No image header_pattern defined in Theme
2020-03-11 17:48:44,362 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-11 17:48:44,365 - WARNING - [MainThread] UM.Decorators.deprecated_function [20]: <function GlobalStack.extruders at 0x600005389ba8> is deprecated (since 4.4): Please use extruderList instead.
2020-03-11 17:48:44,499 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:125:27: Unable to assign [undefined] to int
2020-03-11 17:48:44,502 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:76:29: Unable to assign null to double
2020-03-11 17:48:44,510 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._createAdditionalComponentsView [350]: Creating additional ui components for OctoPrint-connected printers.
2020-03-11 17:48:44,518 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/Resources/qml/QtQuick/Controls/Button.qml:99: TypeError: Cannot read property of null
2020-03-11 17:48:44,520 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/OctoPrintComponents.qml:25:16: Unable to assign [undefined] to QQmlComponent*
2020-03-11 17:48:44,521 - DEBUG - [MainThread] MaterialSettingsPlugin.MaterialSettingsPlugin._onEngineCreated [64]: Replacing Materials preferencepane with patched version
2020-03-11 17:48:44,531 - DEBUG - [MainThread] UM.Controller.setActiveStage [149]: Setting active stage to PrepareStage
2020-03-11 17:48:44,606 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-11 17:48:44,678 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-11 17:48:44,682 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-11 17:48:44,685 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/plugins/plugins/PrepareStage/PrepareMain.qml:16:5: QML ActionPanelWidget: Binding loop detected for property "width"
2020-03-11 17:48:44,688 - DEBUG - [MainThread] UM.Controller.setActiveView [91]: Setting active view to SolidView
2020-03-11 17:48:44,705 - DEBUG - [MainThread] SliceInfoPlugin.SliceInfo._createDialog [71]: Creating dialog [MoreInfoWindow.qml]
2020-03-11 17:48:44,720 - DEBUG - [MainThread] ModelChecker.ModelChecker._createView [109]: Creating model checker view.
2020-03-11 17:48:44,725 - DEBUG - [MainThread] ModelChecker.ModelChecker._createView [118]: Model checker view created.
2020-03-11 17:48:44,728 - DEBUG - [MainThread] Toolbox.src.Toolbox._makeRequestByType [536]: Requesting [updates] metadata from server.
2020-03-11 17:48:44,731 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.getAccessToken [114]: No auth data to retrieve the access_token from
2020-03-11 17:48:44,733 - WARNING - [MainThread] UM.Logger.warning [117]: Cannot add authorization to Cloud Api request
2020-03-11 17:48:44,858 - DEBUG - [MainThread] cura.CuraApplication.run [809]: Booting Cura took 8.981976985931396 seconds
2020-03-11 17:48:45,192 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._processRequest [308]: Request [19d250ea8fda4b908961b531d790a20c] started
2020-03-11 17:48:45,194 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-11 17:48:45,197 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-11 17:48:45,218 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-11 17:48:45,227 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-11 17:48:45,240 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-11 17:48:45,248 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-11 17:48:45,256 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-11 17:48:45,263 - INFO - [MainThread] FirmwareUpdateChecker.FirmwareUpdateChecker.checkFirmwareVersion [74]: No machine with name Monoprice Select Mini V2 (E3D) in list of firmware to check.
2020-03-11 17:48:45,266 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-11 17:48:45,274 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-11 17:48:45,291 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-11 17:48:45,305 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [63]: Updating QualityProfilesDropDownMenuModel.
2020-03-11 17:48:45,965 - DEBUG - [MainThread] UM.Qt.QtRenderer._initialize [188]: Support for Vertex Array Objects: True
2020-03-11 17:48:45,971 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [111]: Initialized OpenGL subsystems.
2020-03-11 17:48:45,974 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [112]: OpenGL Version:  4.1 INTEL-14.4.23
2020-03-11 17:48:45,976 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [113]: OpenGL Vendor:   Intel Inc.
2020-03-11 17:48:45,978 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [114]: OpenGL Renderer: Intel(R) Iris(TM) Plus Graphics 655
2020-03-11 17:48:45,980 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [115]: GLSL Version:    4.10.0
2020-03-11 17:48:45,982 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/default.shader]...
2020-03-11 17:48:45,992 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/selection.shader]...
2020-03-11 17:48:45,997 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/select_face.shader]...
2020-03-11 17:48:46,003 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/default.shader]...
2020-03-11 17:48:46,009 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/composite.shader]...
2020-03-11 17:48:46,017 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/overhang.shader]...
2020-03-11 17:48:46,027 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/striped.shader]...
2020-03-11 17:48:46,034 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/transparent_object.shader]...
2020-03-11 17:48:46,040 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/striped.shader]...
2020-03-11 17:48:46,046 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/default.shader]...
2020-03-11 17:48:46,051 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/grid.shader]...
2020-03-11 17:48:46,058 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/platform.shader]...
2020-03-11 17:48:46,298 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestFinished [369]: Request [19d250ea8fda4b908961b531d790a20c] finished.
2020-03-11 17:48:46,300 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-11 17:48:46,785 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-11 17:48:46,793 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [63]: Updating QualityProfilesDropDownMenuModel.
2020-03-11 17:48:47,320 - INFO - [MainThread] cura.Machines.MachineErrorChecker._setResult [187]: Error check finished, result = False, time = 5.0s
2020-03-11 17:48:48,860 - DEBUG - [Thread-3] cura.Machines.ContainerTree.__getitem__ [106]: Adding container tree for monoprice_select_mini_v2 took 0.9684908390045166 seconds.
2020-03-11 17:48:52,692 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-11 17:48:55,685 - INFO - [MainThread] cura.UI.MachineActionManager.addDefaultMachineActions [56]: Default machine actions have been added for machine definition [wanhao_i3plus], do nothing.
2020-03-11 17:48:55,896 - INFO - [MainThread] cura.Settings.GlobalStack.addExtruder [184]: Extruder[wanhao_i3plus_extruder_0 #5] added to [RedLeader] at position [0]
2020-03-11 17:48:55,899 - WARNING - [MainThread] cura.Settings.ExtruderManager.registerExtruder [156]: Extruder [wanhao_i3plus_extruder_0 #5] has already been registered on machine [RedLeader], not doing anything
2020-03-11 17:48:55,903 - INFO - [MainThread] UM.Logger.info [112]: Initializing Active Machine...
2020-03-11 17:48:56,012 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/SettingsMenu.qml:51: TypeError: Cannot read property 'isEnabled' of undefined
2020-03-11 17:48:56,015 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/SettingsMenu.qml:44: TypeError: Cannot read property 'isEnabled' of undefined
2020-03-11 17:48:56,018 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/MaterialMenu.qml:26: TypeError: Cannot read property 'isEnabled' of undefined
2020-03-11 17:48:56,020 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/MaterialMenu.qml:28: TypeError: Cannot read property 'material' of undefined
2020-03-11 17:48:56,023 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-11 17:48:56,077 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-11 17:48:56,089 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-11 17:48:56,096 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-11 17:48:56,610 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [135]: New error check scheduled.
2020-03-11 17:48:56,962 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-11 17:48:56,969 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [63]: Updating QualityProfilesDropDownMenuModel.
2020-03-11 17:48:57,464 - INFO - [MainThread] cura.Machines.MachineErrorChecker._setResult [187]: Error check finished, result = False, time = 0.9s
2020-03-11 17:49:05,672 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-03-11 17:49:06,464 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/Resources/qml/UM/Dialog.qml:86:13: QML Loader: Binding loop detected for property "active"
2020-03-11 17:49:06,466 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/DiscoverOctoPrintAction.qml:522: TypeError: Cannot call method 'getId' of undefined
2020-03-11 17:49:07,010 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/DiscoverOctoPrintAction.qml:373: TypeError: Cannot read property 'baseURL' of undefined
2020-03-11 17:49:42,025 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-11 17:49:42,028 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [303]: Connection with instance BlueLeader with url http://172.168.2.172:5003/ started
2020-03-11 17:49:42,600 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [215]: Trying to access OctoPrint instance at http://172.168.2.172:5003/ with the provided API key.
2020-03-11 17:49:51,674 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-03-11 17:50:09,026 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [215]: Trying to access OctoPrint instance at http://172.168.2.172:5003/ with the provided API key.
2020-03-11 17:51:05,023 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [215]: Trying to access OctoPrint instance at http://192.168.2.172:5002/ with the provided API key.
2020-03-11 17:51:05,688 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [215]: Trying to access OctoPrint instance at http://192.168.2.171:5001/ with the provided API key.
2020-03-11 17:51:06,769 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [215]: Trying to access OctoPrint instance at http://172.168.2.172:5003/ with the provided API key.
2020-03-11 17:51:49,915 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [215]: Trying to access OctoPrint instance at http://172.168.2.172:5003/ with the provided API key.
2020-03-11 17:52:08,161 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.disconnect [315]: Connection with instance BlueLeader with url http://172.168.2.172:5003/ stopped
2020-03-11 17:52:08,170 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/DiscoverOctoPrintAction.qml:522: TypeError: Cannot call method 'getId' of undefined
2020-03-11 17:52:08,175 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-11 17:52:08,178 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device BlueLeader already added
2020-03-11 17:52:08,179 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [303]: Connection with instance BlueLeader with url http://octolinux:5003/ started
2020-03-11 17:52:08,227 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device BlueLeader already added
2020-03-11 17:52:08,228 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-11 17:52:08,779 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [215]: Trying to access OctoPrint instance at http://octolinux:5003/ with the provided API key.
2020-03-11 17:52:10,966 - WARNING - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [371]: Start polling for AppKeys decision
2020-03-11 17:52:18,694 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-03-11 17:52:18,748 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-11 17:52:19,827 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [396]: AppKey granted
2020-03-11 17:52:28,684 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-11 17:52:38,707 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-11 17:52:39,147 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [215]: Trying to access OctoPrint instance at http://octolinux:5003/ with the provided API key.
2020-03-11 17:52:39,250 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [418]: API key accepted by OctoPrint.
2020-03-11 17:52:48,698 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-11 17:52:58,719 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-11 17:53:00,152 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.disconnect [315]: Connection with instance BlueLeader with url http://octolinux:5003/ stopped
2020-03-11 17:53:00,169 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-11 17:53:00,173 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device BlueLeader already added
2020-03-11 17:53:00,174 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [303]: Connection with instance BlueLeader with url http://octolinux:5003/ started
2020-03-11 17:53:00,182 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/Resources/qml/UM/Dialog.qml:86:13: QML Loader: Binding loop detected for property "active"
2020-03-11 17:53:00,325 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device BlueLeader already added
2020-03-11 17:53:00,326 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-11 17:53:00,750 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [215]: Trying to access OctoPrint instance at http://octolinux:5003/ with the provided API key.
2020-03-11 17:53:10,715 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-11 17:53:20,692 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-11 17:53:30,693 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-11 17:53:33,797 - DEBUG - [MainThread] Toolbox.src.Toolbox._createDialog [218]: Marketplace: Creating dialog [Toolbox.qml].
2020-03-11 17:53:33,889 - DEBUG - [MainThread] Toolbox.src.Toolbox._makeRequestByType [536]: Requesting [packages] metadata from server.
2020-03-11 17:53:33,895 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.getAccessToken [114]: No auth data to retrieve the access_token from
2020-03-11 17:53:33,897 - WARNING - [MainThread] UM.Logger.warning [117]: Cannot add authorization to Cloud Api request
2020-03-11 17:53:33,898 - DEBUG - [MainThread] Toolbox.src.Toolbox._makeRequestByType [536]: Requesting [authors] metadata from server.
2020-03-11 17:53:33,900 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.getAccessToken [114]: No auth data to retrieve the access_token from
2020-03-11 17:53:33,903 - WARNING - [MainThread] UM.Logger.warning [117]: Cannot add authorization to Cloud Api request
2020-03-11 17:53:34,466 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._processRequest [308]: Request [f4df646195f94d5db5c26d5b707dc274] started
2020-03-11 17:53:34,470 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._processRequest [308]: Request [c07893faa6e343688be525b02d60d168] started
2020-03-11 17:53:34,472 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-11 17:53:35,457 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestFinished [369]: Request [c07893faa6e343688be525b02d60d168] finished.
2020-03-11 17:53:35,459 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-11 17:53:38,397 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestFinished [369]: Request [f4df646195f94d5db5c26d5b707dc274] finished.
2020-03-11 17:53:38,400 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-11 17:53:43,691 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-11 17:53:46,622 - DEBUG - [MainThread] Toolbox.src.Toolbox._update [422]: Updating package [SidebarGUIPlugin]...
2020-03-11 17:53:46,622 - INFO - [MainThread] Toolbox.src.Toolbox.startDownload [548]: Attempting to download & install package from https://api.ultimaker.com/cura-packages/v1/cura/v7.0.0/packages/SidebarGUIPlugin/download.
2020-03-11 17:53:46,628 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.getAccessToken [114]: No auth data to retrieve the access_token from
2020-03-11 17:53:46,631 - WARNING - [MainThread] UM.Logger.warning [117]: Cannot add authorization to Cloud Api request
2020-03-11 17:53:46,703 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._processRequest [308]: Request [c2d65e877066430f99278efbcd3c014e] started
2020-03-11 17:53:46,706 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-11 17:53:47,295 - DEBUG - [MainThread] Toolbox.src.Toolbox._onDownloadProgress [665]: new download progress 17754 / 36355 : 48.83509833585477%
2020-03-11 17:53:47,328 - DEBUG - [MainThread] Toolbox.src.Toolbox._onDownloadProgress [665]: new download progress 36355 / 36355 : 100.0%
2020-03-11 17:53:47,332 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestFinished [369]: Request [c2d65e877066430f99278efbcd3c014e] finished.
2020-03-11 17:53:47,334 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-11 17:53:47,368 - INFO - [MainThread] Toolbox.src.Toolbox._onDownloadComplete [668]: Download complete.
2020-03-11 17:53:47,375 - DEBUG - [MainThread] UM.PackageManager.getPackageInfo [573]: Found potential package.json file '/package.json'
2020-03-11 17:53:47,378 - DEBUG - [MainThread] UM.PackageManager.getPackageLicense [600]: Found potential license file '/files/plugins/SidebarGUIPlugin/LICENSE'
2020-03-11 17:53:49,364 - DEBUG - [MainThread] UM.PackageManager.getPackageInfo [573]: Found potential package.json file '/package.json'
2020-03-11 17:53:49,368 - INFO - [MainThread] UM.PackageManager.installPackage [426]: Package [SidebarGUIPlugin] version [4.0.7] is scheduled to be installed.
2020-03-11 17:53:49,375 - INFO - [MainThread] UM.PackageManager._saveManagementData [248]: Package management file /Users/nsanders/Library/Application Support/cura/4.5/packages.json was saved
2020-03-11 17:53:50,696 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-11 17:54:00,692 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-11 17:54:06,513 - DEBUG - [MainThread] Toolbox.src.Toolbox._update [422]: Updating package [CuraInventorPlugin]...
2020-03-11 17:54:06,513 - INFO - [MainThread] Toolbox.src.Toolbox.startDownload [548]: Attempting to download & install package from https://api.ultimaker.com/cura-packages/v1/cura/v7.0.0/packages/CuraInventorPlugin/download.
2020-03-11 17:54:06,519 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.getAccessToken [114]: No auth data to retrieve the access_token from
2020-03-11 17:54:06,521 - WARNING - [MainThread] UM.Logger.warning [117]: Cannot add authorization to Cloud Api request
2020-03-11 17:54:06,569 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._processRequest [308]: Request [e2c1178ebdd545dd8601ec795247d76b] started
2020-03-11 17:54:06,572 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-11 17:54:07,148 - DEBUG - [MainThread] Toolbox.src.Toolbox._onDownloadProgress [665]: new download progress 5961 / 9654097 : 0.0617458059516079%
2020-03-11 17:54:07,265 - DEBUG - [MainThread] Toolbox.src.Toolbox._onDownloadProgress [665]: new download progress 320986 / 9654097 : 3.3248681880863633%
2020-03-11 17:54:07,381 - DEBUG - [MainThread] Toolbox.src.Toolbox._onDownloadProgress [665]: new download progress 1145458 / 9654097 : 11.864993691279464%
2020-03-11 17:54:07,498 - DEBUG - [MainThread] Toolbox.src.Toolbox._onDownloadProgress [665]: new download progress 2128498 / 9654097 : 22.0476135675869%
2020-03-11 17:54:07,648 - DEBUG - [MainThread] Toolbox.src.Toolbox._onDownloadProgress [665]: new download progress 3390066 / 9654097 : 35.11530907551478%
2020-03-11 17:54:07,765 - DEBUG - [MainThread] Toolbox.src.Toolbox._onDownloadProgress [665]: new download progress 4291186 / 9654097 : 44.44937729546326%
2020-03-11 17:54:07,881 - DEBUG - [MainThread] Toolbox.src.Toolbox._onDownloadProgress [665]: new download progress 5012082 / 9654097 : 51.91663187142205%
2020-03-11 17:54:07,998 - DEBUG - [MainThread] Toolbox.src.Toolbox._onDownloadProgress [665]: new download progress 6191730 / 9654097 : 64.13577572299097%
2020-03-11 17:54:08,098 - DEBUG - [MainThread] Toolbox.src.Toolbox._onDownloadProgress [665]: new download progress 6978162 / 9654097 : 72.28187162403692%
2020-03-11 17:54:08,198 - DEBUG - [MainThread] Toolbox.src.Toolbox._onDownloadProgress [665]: new download progress 8157810 / 9654097 : 84.50101547560584%
2020-03-11 17:54:08,299 - DEBUG - [MainThread] Toolbox.src.Toolbox._onDownloadProgress [665]: new download progress 8993394 / 9654097 : 93.15624237046717%
2020-03-11 17:54:08,633 - DEBUG - [MainThread] Toolbox.src.Toolbox._onDownloadProgress [665]: new download progress 9654097 / 9654097 : 100.0%
2020-03-11 17:54:08,633 - DEBUG - [MainThread] Toolbox.src.Toolbox._onDownloadProgress [665]: new download progress 9654097 / 9654097 : 100.0%
2020-03-11 17:54:08,637 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestFinished [369]: Request [e2c1178ebdd545dd8601ec795247d76b] finished.
2020-03-11 17:54:08,640 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-11 17:54:08,675 - INFO - [MainThread] Toolbox.src.Toolbox._onDownloadComplete [668]: Download complete.
2020-03-11 17:54:08,691 - DEBUG - [MainThread] UM.PackageManager.getPackageInfo [573]: Found potential package.json file '/package.json'
2020-03-11 17:54:08,706 - DEBUG - [MainThread] UM.PackageManager.getPackageLicense [600]: Found potential license file '/files/plugins/CuraInventorPlugin/LICENSE'
2020-03-11 17:54:10,696 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [652]: Received an unexpected returncode: 403
2020-03-11 17:54:10,854 - DEBUG - [MainThread] UM.PackageManager.getPackageInfo [573]: Found potential package.json file '/package.json'
2020-03-11 17:54:10,858 - INFO - [MainThread] UM.PackageManager.installPackage [426]: Package [CuraInventorPlugin] version [0.4.0] is scheduled to be installed.
2020-03-11 17:54:10,876 - INFO - [MainThread] UM.PackageManager._saveManagementData [248]: Package management file /Users/nsanders/Library/Application Support/cura/4.5/packages.json was saved
2020-03-11 17:54:14,691 - DEBUG - [MainThread] Toolbox.src.Toolbox._update [422]: Updating package [OctoPrintPlugin]...
2020-03-11 17:54:14,691 - INFO - [MainThread] Toolbox.src.Toolbox.startDownload [548]: Attempting to download & install package from https://api.ultimaker.com/cura-packages/v1/cura/v7.1.0/packages/OctoPrintPlugin/download.
2020-03-11 17:54:14,695 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.getAccessToken [114]: No auth data to retrieve the access_token from
2020-03-11 17:54:14,698 - WARNING - [MainThread] UM.Logger.warning [117]: Cannot add authorization to Cloud Api request
2020-03-11 17:54:14,748 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._processRequest [308]: Request [bf0fe2e97a844da2b68259700b48e37a] started
2020-03-11 17:54:14,753 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-11 17:54:15,208 - DEBUG - [MainThread] Toolbox.src.Toolbox._onDownloadProgress [665]: new download progress 3185 / 125405 : 2.5397711415015354%
2020-03-11 17:54:15,227 - DEBUG - [MainThread] Toolbox.src.Toolbox._onDownloadProgress [665]: new download progress 125405 / 125405 : 100.0%
2020-03-11 17:54:15,238 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestFinished [369]: Request [bf0fe2e97a844da2b68259700b48e37a] finished.
2020-03-11 17:54:15,242 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-11 17:54:15,282 - INFO - [MainThread] Toolbox.src.Toolbox._onDownloadComplete [668]: Download complete.
2020-03-11 17:54:15,286 - DEBUG - [MainThread] UM.PackageManager.getPackageInfo [573]: Found potential package.json file '/package.json'
2020-03-11 17:54:15,290 - DEBUG - [MainThread] UM.PackageManager.getPackageLicense [600]: Found potential license file '/files/plugins/OctoPrintPlugin/LICENSE'
2020-03-11 17:54:17,017 - DEBUG - [MainThread] UM.PackageManager.getPackageInfo [573]: Found potential package.json file '/package.json'
2020-03-11 17:54:17,021 - INFO - [MainThread] UM.PackageManager.installPackage [426]: Package [OctoPrintPlugin] version [3.5.12] is scheduled to be installed.
2020-03-11 17:54:17,025 - INFO - [MainThread] UM.PackageManager._saveManagementData [248]: Package management file /Users/nsanders/Library/Application Support/cura/4.5/packages.json was saved
2020-03-11 17:54:19,318 - DEBUG - [MainThread] UM.Qt.QtApplication.windowClosed [462]: Shutting down cura
2020-03-11 17:54:19,338 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._terminate [292]: Attempting to kill the engine process
2020-03-11 17:54:19,338 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._terminate [298]: Killing engine process
2020-03-11 17:54:19,339 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._terminate [301]: Engine process is killed. Received return code -15
2020-03-11 17:54:36,967 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin FileLogger
2020-03-11 17:54:36,972 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin LegacyProfileReader
2020-03-11 17:54:36,979 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin AMFReader
2020-03-11 17:54:36,985 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin SimpleView
2020-03-11 17:54:36,989 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin SolidView
2020-03-11 17:54:36,997 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin FirmwareUpdateChecker
2020-03-11 17:54:37,002 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin SentryLogger
2020-03-11 17:54:37,009 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin SupportEraser
2020-03-11 17:54:37,015 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin PrepareStage
2020-03-11 17:54:37,035 - ERROR - [MainThread] UM.Logger.logException [98]: Exception: Error loading plugin CuraInventorPlugin:
2020-03-11 17:54:37,038 - ERROR - [MainThread] UM.Logger.logException [102]: Traceback (most recent call last):
2020-03-11 17:54:37,041 - ERROR - [MainThread] UM.Logger.logException [102]:   File "/Users/ultimaker/build/4.5/build/inst/lib/python3.5/site-packages/UM/PluginRegistry.py", line 417, in loadPlugin
2020-03-11 17:54:37,043 - ERROR - [MainThread] UM.Logger.logException [102]:   File "/Users/nsanders/Library/Application Support/cura/4.5/plugins/CuraInventorPlugin/CuraInventorPlugin/__init__.py", line 57, in register
2020-03-11 17:54:37,045 - ERROR - [MainThread] UM.Logger.logException [102]:     not_correct_os_message = Message(i18n_catalog.i18nc("@info:status",
2020-03-11 17:54:37,047 - ERROR - [MainThread] UM.Logger.logException [102]: NameError: name 'Message' is not defined
2020-03-11 17:54:37,055 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin LinearAdvanceSettingPlugin
2020-03-11 17:54:37,063 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin VersionInTitlebarPlugin
2020-03-11 17:54:37,073 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin OrientationPlugin
2020-03-11 17:54:37,119 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevicePlugin.<module> [46]: Supplied version of Zeroconf module imported
2020-03-11 17:54:37,132 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin OctoPrintPlugin
2020-03-11 17:54:37,140 - DEBUG - [MainThread] SidebarGUIPlugin.SidebarGUIProxy.__init__ [18]: SidebarGUI proxy created
2020-03-11 17:54:37,143 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin SidebarGUIPlugin
2020-03-11 17:54:37,151 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin MeshTools
2020-03-11 17:54:37,156 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin ZOffsetPlugin
2020-03-11 17:54:37,163 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin CustomSupports
2020-03-11 17:54:37,174 - INFO - [MainThread] UM.Logger.info [112]: Loaded plugin MaterialSettingsPlugin
2020-03-11 17:54:37,184 - DEBUG - [MainThread] UM.PluginRegistry.loadPlugins [369]: Loading all plugins took 0.8421330451965332 seconds
2020-03-11 17:54:37,196 - INFO - [MainThread] UM.VersionUpgradeManager.upgrade [148]: Looking for old configuration files to upgrade.
2020-03-11 17:54:37,311 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-11 17:54:37,315 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-11 17:54:37,318 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-11 17:54:37,322 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-11 17:54:37,325 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-11 17:54:37,328 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-11 17:54:37,332 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-11 17:54:37,335 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-11 17:54:37,338 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-11 17:54:37,341 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-11 17:54:37,344 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-11 17:54:37,347 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-11 17:54:37,350 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ./.DS_Store, skip it
2020-03-11 17:54:37,446 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [309]: Failed to get file version: ../3D4MakersFacilanC8/3d4makers_facilan_c8.xml.fdm_material, skip it
2020-03-11 17:54:40,713 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.loadAllMetadata [330]: Loading metadata into container registry took 3.107712984085083 seconds
2020-03-11 17:54:40,888 - DEBUG - [MainThread] cura.Scene.CuraSceneController.setActiveBuildPlate [111]: Select build plate: 0
2020-03-11 17:54:40,891 - INFO - [MainThread] cura.CuraApplication.run [761]: Initializing machine error checker
2020-03-11 17:54:40,958 - INFO - [MainThread] cura.UI.MachineActionManager.addDefaultMachineActions [72]: Default machine actions added for machine definition [wanhao_i3plus]
2020-03-11 17:54:41,356 - INFO - [MainThread] cura.Settings.GlobalStack.addExtruder [184]: Extruder[wanhao_i3plus_extruder_0 #5] added to [RedLeader] at position [0]
2020-03-11 17:54:41,358 - WARNING - [MainThread] cura.Settings.ExtruderManager.registerExtruder [156]: Extruder [wanhao_i3plus_extruder_0 #5] has already been registered on machine [RedLeader], not doing anything
2020-03-11 17:54:41,360 - INFO - [MainThread] FirmwareUpdateChecker.FirmwareUpdateChecker.checkFirmwareVersion [74]: No machine with name Wanhao Duplicator i3 Plus in list of firmware to check.
2020-03-11 17:54:41,546 - DEBUG - [MainThread] cura.Machines.ContainerTree.__getitem__ [106]: Adding container tree for wanhao_i3plus took 0.15766096115112305 seconds.
2020-03-11 17:54:41,549 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: BQ_PauseAtHeight
2020-03-11 17:54:41,550 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: ChangeAtZ
2020-03-11 17:54:41,551 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: ColorMix
2020-03-11 17:54:41,552 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: DisplayFilenameAndLayerOnLCD
2020-03-11 17:54:41,552 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: DisplayRemainingTimeOnLCD
2020-03-11 17:54:41,553 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: FilamentChange
2020-03-11 17:54:41,554 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: InsertAtLayerChange
2020-03-11 17:54:41,554 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: PauseAtHeight
2020-03-11 17:54:41,555 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: PauseAtHeightRepRapFirmwareDuet
2020-03-11 17:54:41,556 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: PauseAtHeightforRepetier
2020-03-11 17:54:41,557 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: RetractContinue
2020-03-11 17:54:41,557 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: SearchAndReplace
2020-03-11 17:54:41,558 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: Stretch
2020-03-11 17:54:41,559 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: TimeLapse
2020-03-11 17:54:41,560 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [173]: Begin loading of script: UsePreviousProbeMeasurements
2020-03-11 17:54:41,687 - INFO - [MainThread] cura.CuraApplication.run [766]: Initializing machine manager
2020-03-11 17:54:41,707 - INFO - [MainThread] cura.CuraApplication.run [771]: Initializing container manager
2020-03-11 17:54:41,760 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-11 17:54:42,133 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [310]: Connection with instance BlueLeader with url http://octolinux:5003/ started
2020-03-11 17:54:42,173 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [135]: New error check scheduled.
2020-03-11 17:54:42,188 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device BlueLeader already added
2020-03-11 17:54:42,193 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [719]: Received an unexpected returncode: 403
2020-03-11 17:54:42,196 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x6000030a75e8>
2020-03-11 17:54:42,198 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 17:54:42,200 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x6000030ad5f8>
2020-03-11 17:54:42,201 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 17:54:42,210 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x6000030a75e8>
2020-03-11 17:54:42,212 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 17:54:42,231 - DEBUG - [MainThread] UM.Scene.Camera._preferencesChanged [246]: Changing perspective mode to perspective.
2020-03-11 17:54:42,475 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [158]: Loading theme file: /Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/themes/cura-dark/theme.json
2020-03-11 17:54:42,481 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [158]: Loading theme file: /Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/themes/cura-light/theme.json
2020-03-11 17:54:42,616 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [231]: Loaded theme /Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/themes/cura-light
2020-03-11 17:54:42,621 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [231]: Loaded theme /Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/themes/cura-dark
2020-03-11 17:54:43,089 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin._createView [304]: Creating post processing plugin view.
2020-03-11 17:54:43,204 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin._createView [314]: Post processing view created.
2020-03-11 17:54:43,414 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._parseJWT [91]: There was no auth data or access token
2020-03-11 17:54:43,418 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._parseJWT [91]: There was no auth data or access token
2020-03-11 17:54:43,423 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._parseJWT [91]: There was no auth data or access token
2020-03-11 17:54:43,428 - WARNING - [MainThread] UM.Qt.Bindings.Theme.getImage [133]: No image header_pattern defined in Theme
2020-03-11 17:54:43,984 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-11 17:54:43,990 - WARNING - [MainThread] UM.Decorators.deprecated_function [20]: <function GlobalStack.extruders at 0x600006aa24a8> is deprecated (since 4.4): Please use extruderList instead.
2020-03-11 17:54:44,127 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:125:27: Unable to assign [undefined] to int
2020-03-11 17:54:44,130 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:76:29: Unable to assign null to double
2020-03-11 17:54:44,138 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._createAdditionalComponentsView [426]: Creating additional ui components for OctoPrint-connected printers.
2020-03-11 17:54:44,143 - DEBUG - [MainThread] MaterialSettingsPlugin.MaterialSettingsPlugin._onEngineCreated [64]: Replacing Materials preferencepane with patched version
2020-03-11 17:54:44,144 - DEBUG - [MainThread] SidebarGUIPlugin.SidebarGUIPlugin._onEngineCreated [38]: Registering replacement stages
2020-03-11 17:54:44,152 - DEBUG - [MainThread] UM.Controller.setActiveStage [149]: Setting active stage to PrepareStage
2020-03-11 17:54:44,155 - DEBUG - [MainThread] UM.Controller.setActiveView [91]: Setting active view to SolidView
2020-03-11 17:54:44,282 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-11 17:54:44,302 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-11 17:54:44,306 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-11 17:54:44,361 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/SidebarGUIPlugin/SidebarGUIPlugin/resources/qml/ProfileSelector44.qml:38:5: QML Button: Binding loop detected for property "implicitWidth"
2020-03-11 17:54:44,391 - DEBUG - [MainThread] cura.CuraApplication.log [1636]: SidebarGUIPlugin patching interface for Cura 4.5 and newer
2020-03-11 17:54:44,396 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:33:18: QML PrintSetupSelectorContents: Possible anchor loop detected on fill.
2020-03-11 17:54:44,400 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-11 17:54:44,403 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-11 17:54:44,406 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-11 17:54:44,408 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-11 17:54:44,416 - DEBUG - [MainThread] UM.Controller.setActiveView [91]: Setting active view to SolidView
2020-03-11 17:54:44,429 - DEBUG - [MainThread] SliceInfoPlugin.SliceInfo._createDialog [71]: Creating dialog [MoreInfoWindow.qml]
2020-03-11 17:54:44,445 - DEBUG - [MainThread] ModelChecker.ModelChecker._createView [109]: Creating model checker view.
2020-03-11 17:54:44,451 - DEBUG - [MainThread] ModelChecker.ModelChecker._createView [118]: Model checker view created.
2020-03-11 17:54:44,453 - DEBUG - [MainThread] Toolbox.src.Toolbox._makeRequestByType [536]: Requesting [updates] metadata from server.
2020-03-11 17:54:44,457 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.getAccessToken [114]: No auth data to retrieve the access_token from
2020-03-11 17:54:44,460 - WARNING - [MainThread] UM.Logger.warning [117]: Cannot add authorization to Cloud Api request
2020-03-11 17:54:44,648 - DEBUG - [MainThread] cura.CuraApplication.run [809]: Booting Cura took 9.444934129714966 seconds
2020-03-11 17:54:44,687 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._processRequest [308]: Request [5565270ffb764cf2ab05434f9eb9d67a] started
2020-03-11 17:54:44,690 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-11 17:54:44,693 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-11 17:54:44,721 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-11 17:54:44,736 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-11 17:54:44,751 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-11 17:54:44,779 - INFO - [MainThread] FirmwareUpdateChecker.FirmwareUpdateChecker.checkFirmwareVersion [74]: No machine with name Monoprice Select Mini V2 (E3D) in list of firmware to check.
2020-03-11 17:54:44,784 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-11 17:54:44,799 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-11 17:54:44,815 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-11 17:54:44,831 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-11 17:54:44,870 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-11 17:54:44,891 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [63]: Updating QualityProfilesDropDownMenuModel.
2020-03-11 17:54:45,752 - DEBUG - [MainThread] UM.Qt.QtRenderer._initialize [188]: Support for Vertex Array Objects: True
2020-03-11 17:54:45,757 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [111]: Initialized OpenGL subsystems.
2020-03-11 17:54:45,759 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [112]: OpenGL Version:  4.1 INTEL-14.4.23
2020-03-11 17:54:45,762 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [113]: OpenGL Vendor:   Intel Inc.
2020-03-11 17:54:45,768 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [114]: OpenGL Renderer: Intel(R) Iris(TM) Plus Graphics 655
2020-03-11 17:54:45,774 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [115]: GLSL Version:    4.10.0
2020-03-11 17:54:45,779 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/default.shader]...
2020-03-11 17:54:45,790 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/selection.shader]...
2020-03-11 17:54:45,797 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/select_face.shader]...
2020-03-11 17:54:45,808 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/default.shader]...
2020-03-11 17:54:45,818 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/composite.shader]...
2020-03-11 17:54:45,829 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/overhang.shader]...
2020-03-11 17:54:45,841 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/striped.shader]...
2020-03-11 17:54:45,852 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/transparent_object.shader]...
2020-03-11 17:54:45,858 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/striped.shader]...
2020-03-11 17:54:45,869 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/default.shader]...
2020-03-11 17:54:45,879 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/grid.shader]...
2020-03-11 17:54:45,887 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/platform.shader]...
2020-03-11 17:54:46,042 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestFinished [369]: Request [5565270ffb764cf2ab05434f9eb9d67a] finished.
2020-03-11 17:54:46,045 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-11 17:54:46,922 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-11 17:54:46,937 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [63]: Updating QualityProfilesDropDownMenuModel.
2020-03-11 17:54:48,290 - DEBUG - [Thread-3] cura.Machines.ContainerTree.__getitem__ [106]: Adding container tree for monoprice_select_mini_v2 took 1.1242690086364746 seconds.
2020-03-11 17:54:48,584 - INFO - [MainThread] cura.Machines.MachineErrorChecker._setResult [187]: Error check finished, result = False, time = 6.4s
2020-03-11 17:54:52,684 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [719]: Received an unexpected returncode: 403
2020-03-11 17:54:52,685 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x6000073c9ac8>
2020-03-11 17:54:52,685 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 17:54:52,692 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x6000073c2238>
2020-03-11 17:54:52,692 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 17:54:55,679 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-03-11 17:54:58,605 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/Resources/qml/UM/Dialog.qml:86:13: QML Loader: Binding loop detected for property "active"
2020-03-11 17:54:59,204 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [263]: Trying to access OctoPrint instance at http://octolinux:5003/ with the provided API key.
2020-03-11 17:55:00,962 - WARNING - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [458]: Start polling for AppKeys decision
2020-03-11 17:55:02,700 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [719]: Received an unexpected returncode: 403
2020-03-11 17:55:02,701 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x6000073c3578>
2020-03-11 17:55:02,701 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 17:55:02,711 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x6000073c33b8>
2020-03-11 17:55:02,712 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 17:55:05,192 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [484]: AppKey granted
2020-03-11 17:55:12,687 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [719]: Received an unexpected returncode: 403
2020-03-11 17:55:12,688 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x6000073e8398>
2020-03-11 17:55:12,688 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 17:55:12,698 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x6000073f5e48>
2020-03-11 17:55:12,698 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 17:55:20,681 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [263]: Trying to access OctoPrint instance at http://octolinux:5003/ with the provided API key.
2020-03-11 17:55:20,870 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [506]: API key accepted by OctoPrint.
2020-03-11 17:56:40,204 - INFO - [Thread-4] STLReader.STLReader.load_file [51]: Using NumPy-STL to load STL data.
2020-03-11 17:56:40,612 - DEBUG - [Thread-4] UM.Mesh.MeshData.calculateNormalsFromVertices [495]: Calculating normals took 0.002215862274169922 seconds
2020-03-11 17:56:40,614 - DEBUG - [Thread-4] STLReader.STLReader._read [102]: Loaded a mesh with 38316 vertices
2020-03-11 17:56:40,655 - DEBUG - [Thread-4] UM.Mesh.MeshData.approximateConvexHull [452]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.03565812110900879 seconds. 369 input vertices. 369 output vertices.
2020-03-11 17:56:40,673 - DEBUG - [Thread-4] UM.FileHandler.ReadFileJob.run [71]: Loading file took 0.5 seconds
2020-03-11 17:56:40,707 - DEBUG - [Thread-4] UM.Mesh.MeshData.approximateConvexHull [452]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.027225971221923828 seconds. 369 input vertices. 369 output vertices.
2020-03-11 17:56:40,778 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: <UM.Operations.AddSceneNodeOperation.AddSceneNodeOperation object at 0x6000102a1fd8>, took 12ms
2020-03-11 17:56:40,786 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [56]: Loading shader file [/Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/shaders/transparent_object.shader]...
2020-03-11 17:56:45,985 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [225]: Starting to slice...
2020-03-11 17:56:45,985 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [243]: Going to slice build plate [0]!
2020-03-11 17:56:45,995 - WARNING - [Thread-5] UM.Decorators.deprecated_function [20]: <function GlobalStack.extruders at 0x600006aa24a8> is deprecated (since 4.4): Please use extruderList instead.
2020-03-11 17:56:46,307 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onStartSliceCompleted [429]: Sending slice message took 0.3217298984527588 seconds
2020-03-11 17:56:46,510 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING]  -s acceleration_layer_0="3000" -s raft_surface_line_spacing="0.4" -s jerk_travel_layer_0="30.0" -s minimum_interface_area="1.0" -s slicing_tolerance="middle" -s coasting_speed="90" -s switch_extruder_extra_prime_amount="0" -s roofing_material_flow="100" -s wall_line_width="0.4" -s material_break_preparation_temperature="210" -s top_skin_expand_distance="0.8" -s material_linear_advance_factor_support_interface="0" -s retract_at_layer_change="False" -s material_bed_temperature="63" -s machine_width="200" -s machine_max_feedrate_y="299792458000" -s smooth_spiralized_contours="True" -s prime_tower_brim_enable="False" -s outer_inset_first="False" -s adaptive_layer_height_variation="0.1" -s cross_infill_density_image="" -s retraction_min_travel="0.8" -s support_interface_skip_height="0.3" -s bridge_skin_speed_2="15.0" -s date="11-03-2020" -s speed_support_roof="20.0" -s platform_adhesion="0" -s raft_base_thickness="0.36" -s meshfix_union_all_remove_holes="False" -s skirt_line_count="4" -s infill_angles="[ ]" -s jerk_layer_0="20" -s speed_print="60" -s print_temperature="210" -s material_guid="" -s default_material_bed_temperature="60" -s initial_extruder_nr="0" -s support_conical_min_width="5.0" -s raft_jerk="20" -s nozzle_disallowed_areas="[]" -s support_interface_extruder_nr="0" -s support_tower_maximum_supported_diameter="3.0" -s acceleration_wall_0="3000" -s speed_roofing="30.0" -s speed_wall_x="60.0" -s magic_mesh_surface_mode="normal" -s top_skin_preshrink="0.8" -s wipe_hop_amount="1" -s support_join_distance="2.0" -s gradual_infill_steps="0" -s raft_surface_line_width="0.4" -s top_bottom_extruder_nr="-1" -s mold_enabled="False" -s support_use_towers="True" -s minimum_support_area="0.0" -s limit_support_retractions="True" -s support_bottom_line_distance="0.4" -s coasting_enable="False" -s bridge_settings_enabled="False" -s machine_max_acceleration_e="10000" -s max_skin_angle_for_expansion="90" -s wireframe_flow="100" -s ironing_line_spacing="0.1" -s raft_interface_acceleration="3000" -s infill_enable_travel_optimization="False" -s support_bottom_height="1" -s clean_between_layers="False" -s prime_tower_size="20" -s prime_tower_enable="False" -s raft_surface_acceleration="3000" -s skin_preshrink="0.8" -s support_interface_line_width="0.4" -s wipe_hop_speed="10" -s speed_layer_0="30.0" -s machine_start_gcode="" -s initial_layer_line_width_factor="100.0" -s material_end_of_filament_purge_speed="0.5" -s mold_roof_height="0.5" -s machine_nozzle_head_distance="3" -s acceleration_ironing="3000" -s prime_tower_flow="100" -s raft_interface_fan_speed="0" -s raft_surface_layers="2" -s skirt_brim_minimal_length="250" -s support_bottom_angles="[ ]" -s speed_support_bottom="20.0" -s raft_fan_speed="0" -s machine_max_feedrate_x="299792458000" -s raft_base_line_width="0.8" -s speed_ironing="20.0" -s support_interface_height="1" -s support_infill_extruder_nr="0" -s speed_support_interface="40.0" -s wireframe_flat_delay="0.1" -s command_line_settings="0" -s speed_support="60" -s infill="0" -s material_shrinkage_percentage="0" -s raft_interface_jerk="20" -s minimum_polygon_circumference="1.0" -s material_linear_advance_factor_support="0" -s brim_width="8.0" -s alternate_extra_perimeter="False" -s support_roof_enable="True" -s bridge_skin_support_threshold="50" -s retraction_retract_speed="25" -s material_print_temperature_layer_0="210" -s cool_fan_full_layer="2" -s roofing_angles="[ ]" -s support_enable="False" -s wall_line_count="2" -s support_bottom_pattern="concentric" -s ooze_shield_angle="60" -s machine_endstop_positive_direction_x="False" -s wireframe_top_jump="0.6" -s support_skip_zag_per_mm="20" -s bottom_skin_expand_distance="0.8" -s adaptive_layer_height_variation_step="0.01" -s raft_surface_jerk="20" -s connect_skin_polygons="False" -s infill_pattern="grid" -s extruders_enabled_count="1" -s support_tower_diameter="3.0" -s wall_x_material_flow="100" -s jerk_infill="20" -s cutting_mesh="False" -s machine_max_jerk_xy="20.0" -s support_interface_density="100" -s material_end_of_filament_purge_length="20" -s acceleration_support_bottom="3000" -s material_break_preparation_speed="2" -s wireframe_roof_drag_along="0.8" -s bridge_skin_material_flow_3="110" -s support_interface_pattern="concentric" -s bridge_fan_speed_2="0" -s initial_bottom_layers="8" -s wipe_retraction_retract_speed="25" -s multiple_mesh_overlap="0.15" -s draft_shield_height_limitation="full" -s wireframe_printspeed_flat="5" -s material_linear_advance_factor_infill="0" -s magic_fuzzy_skin_enabled="False" -s jerk_enabled="False" -s wipe_pause="0" -s wipe_retraction_prime_speed="25" -s jerk_support_bottom="20" -s material_no_load_move_factor="0.940860215" -s retraction_combing="all" -s material_flow_layer_0="100" -s wall_material_flow="100" -s raft_speed="30.0" -s mold_angle="40" -s machine_end_gcode="" -s machine_center_is_zero="False" -s wireframe_up_half_speed="0.3" -s machine_settings="0" -s acceleration_topbottom="3000" -s z_seam_position="back" -s magic_spiralize="False" -s meshfix_maximum_deviation="0.05" -s wall_overhang_angle="90" -s cool_fan_enabled="True" -s cool_fan_speed_max="100.0" -s cooling="0" -s draft_shield_dist="10" -s cool_min_layer_time_fan_speed_max="10" -s wipe_retraction_enable="True" -s day="Wed" -s machine_max_jerk_z="0.4" -s support_tree_angle="40" -s cross_infill_pocket_size="4.0" -s wall_line_width_0="0.4" -s support_offset="0" -s wireframe_fall_down="0.5" -s material_flow="100" -s material_break_speed="25" -s machine_extruders_share_heater="False" -s speed_wall_0="30.0" -s cool_lift_head="False" -s wall_0_inset="0" -s relative_extrusion="False" -s machine_min_cool_heat_time_window="50.0" -s layer_start_x="0.0" -s machine_max_acceleration_z="100" -s support_wall_count="0" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s skin_edge_support_thickness="0" -s wall_x_extruder_nr="-1" -s switch_extruder_prime_speed="20" -s extruder_prime_pos_x="0" -s build_volume_temperature="28" -s layer_start_y="0.0" -s infill_wipe_dist="0.1" -s cool_min_speed="10" -s wall_min_flow="0" -s ironing_flow="10.0" -s travel="0" -s magic_fuzzy_skin_outside_only="False" -s infill_line_width="0.4" -s meshfix_maximum_travel_resolution="0.8" -s support_extruder_nr_layer_0="0" -s acceleration_support_interface="3000" -s spaghetti_max_infill_angle="10" -s support_mesh_drop_down="True" -s wipe_hop_enable="False" -s zig_zaggify_support="False" -s machine_depth="200" -s material_bed_temp_wait="True" -s machine_endstop_positive_direction_z="True" -s coasting_volume="0.064" -s mesh_position_x="0" -s prime_tower_position_y="175.584" -s material_linear_advance_factor_wall_0="0" -s wall_0_wipe_dist="0.2" -s travel_speed="120" -s speed="0" -s flow_rate_max_extrusion_offset="0" -s material_diameter="2.85" -s infill_overlap_mm="0.04" -s mesh_position_z="0" -s conical_overhang_angle="50" -s zig_zaggify_infill="False" -s speed_z_hop="10" -s machine_nozzle_size="0.4" -s top_layers="8" -s infill_multiplier="1" -s spaghetti_inset="0.2" -s top_bottom_pattern_0="lines" -s jerk_wall="20" -s travel_avoid_other_parts="True" -s acceleration_print_layer_0="3000" -s material_break_temperature="50" -s wipe_retraction_amount="6.5" -s machine_heat_zone_length="16" -s jerk_skirt_brim="20" -s raft_base_line_spacing="1.6" -s speed_support_infill="60" -s max_extrusion_before_wipe="10" -s bottom_layers="8" -s material_flow_dependent_temperature="False" -s machine_firmware_retract="False" -s switch_extruder_retraction_speeds="20" -s material_linear_advance_factor_wall_x="0" -s acceleration_print="3000" -s machine_use_extruder_offset_to_offset_coords="True" -s machine_heated_bed="True" -s travel_compensate_overlapping_walls_0_enabled="True" -s skin_angles="[ ]" -s machine_steps_per_mm_z="50" -s speed_topbottom="30.0" -s raft_smoothing="5" -s support_line_width="0.4" -s ooze_shield_enabled="False" -s support_skip_some_zags="False" -s min_skin_width_for_expansion="4.898587196589413e-17" -s machine_endstop_positive_direction_y="False" -s wireframe_top_delay="0" -s ooze_shield_dist="2" -s prime_tower_min_volume="6" -s machine_disallowed_areas="[]" -s jerk_support_interface="20" -s infill_extruder_nr="-1" -s infill_sparse_density="20" -s wireframe_roof_inset="3" -s jerk_print_layer_0="20" -s material_anti_ooze_retracted_position="-4" -s support_roof_material_flow="100" -s alternate_carve_order="True" -s support_bottom_extruder_nr="0" -s support_xy_distance_overhang="0.2" -s speed_equalize_flow_max="150" -s layer_height="0.1" -s infill_mesh="False" -s material_break_preparation_retracted_position="-16" -s jerk_topbottom="20" -s remove_empty_first_layers="True" -s acceleration_wall="3000" -s support_bottom_material_flow="100" -s acceleration_travel="5000" -s ironing_enabled="False" -s skin_no_small_gaps_heuristic="False" -s support_infill_sparse_thickness="0.1" -s material_bed_temperature_layer_0="63" -s machine_steps_per_mm_e="1600" -s support_bottom_distance="0" -s wall_thickness="0.8" -s material_crystallinity="False" -s cool_min_layer_time="5" -s material_linear_advance_factor="0" -s support_infill_angles="[ ]" -s shell="0" -s support_roof_pattern="concentric" -s support_mesh="False" -s support_material_flow="100" -s bridge_fan_speed="100" -s acceleration_roofing="3000" -s retraction_hop_enabled="False" -s switch_extruder_retraction_speed="20" -s small_feature_speed_factor="50" -s gradual_support_infill_steps="0" -s bridge_skin_density_3="80" -s support_interface_enable="False" -s retraction_speed="25" -s bridge_skin_speed="15.0" -s skirt_brim_material_flow="100" -s raft_base_jerk="20" -s time="17:56:46" -s machine_buildplate_type="glass" -s z_seam_y="200" -s machine_feeder_wheel_diameter="10.0" -s retraction_hop_only_when_collides="False" -s infill_support_angle="40" -s support_brim_width="8.0" -s cool_fan_speed_min="100.0" -s wipe_move_distance="20" -s bridge_fan_speed_3="0" -s wireframe_roof_outer_delay="0.2" -s ironing_inset="0.2" -s support_tree_branch_diameter_angle="5" -s speed_slowdown_layers="2" -s default_material_print_temperature="210" -s roofing_layer_count="0" -s bridge_skin_density_2="75" -s retraction_amount="6.5" -s wipe_retraction_speed="25" -s material_final_print_temperature="195" -s bridge_wall_material_flow="50" -s gantry_height="180" -s material_surface_energy="100" -s raft_interface_line_width="0.8" -s infill_offset_x="0" -s speed_equalize_flow_enabled="False" -s adaptive_layer_height_threshold="0.2" -s raft_interface_line_spacing="1.0" -s material_flush_purge_length="60" -s machine_nozzle_heat_up_speed="2.0" -s raft_surface_fan_speed="0" -s machine_max_feedrate_e="299792458000" -s spaghetti_infill_stepped="True" -s support_xy_distance="0.7" -s speed_wall="30.0" -s sub_div_rad_add="0.4" -s bottom_skin_preshrink="0.8" -s machine_steps_per_mm_y="50" -s wireframe_printspeed="5" -s support_tree_branch_diameter="2" -s jerk_support_infill="20" -s wall_overhang_speed_factor="100" -s adhesion_extruder_nr="0" -s mold_width="5" -s machine_acceleration="4000" -s support_bottom_stair_step_width="5.0" -s travel_compensate_overlapping_walls_x_enabled="True" -s cool_fan_speed_0="0" -s blackmagic="0" -s infill_support_enabled="False" -s support_brim_line_count="20" -s support_roof_height="1.2" -s center_object="False" -s skirt_brim_line_width="0.4" -s top_bottom_pattern="lines" -s print_sequence="all_at_once" -s skin_overlap="5" -s wireframe_nozzle_clearance="1" -s speed_infill="60" -s wipe_retraction_extra_prime_amount="0" -s retraction_combing_max_distance="0" -s z_seam_x="100.0" -s draft_shield_height="10" -s wireframe_height="3" -s z_seam_relative="False" -s cross_support_density_image="" -s top_bottom_thickness="0.8" -s skirt_brim_speed="30.0" -s switch_extruder_retraction_amount="16" -s material_maximum_park_duration="300" -s machine_nozzle_temp_enabled="True" -s raft_base_speed="22.5" -s support_angle="70" -s jerk_ironing="20" -s expand_skins_expand_distance="0.8" -s roofing_line_width="0.4" -s machine_shape="rectangular" -s conical_overhang_enabled="False" -s speed_travel_layer_0="60.0" -s wireframe_printspeed_bottom="5" -s machine_minimum_feedrate="0.0" -s line_width="0.4" -s optimize_wall_printing_order="False" -s raft_surface_speed="30.0" -s machine_height="180" -s travel_retract_before_outer_wall="False" -s prime_blob_enable="False" -s meshfix_keep_open_polygons="False" -s wireframe_straight_before_down="20" -s z_seam_corner="z_seam_corner_inner" -s machine_head_with_fans_polygon="[[-20, 10], [10, 10], [10, -10], [-20, -10]]" -s ironing_only_highest_layer="False" -s acceleration_wall_x="3000" -s carve_multiple_volumes="False" -s flow_rate_extrusion_offset_factor="100" -s wireframe_printspeed_up="5" -s resolution="0" -s raft_surface_thickness="0.1" -s acceleration_travel_layer_0="5000.0" -s wipe_brush_pos_x="100" -s machine_nozzle_id="unknown" -s material_linear_advance_factor_wall="0" -s coasting_min_volume="0.8" -s cool_fan_speed="100.0" -s support_zag_skip_count="8" -s fill_outline_gaps="False" -s machine_filament_park_distance="16" -s wireframe_flow_flat="100" -s speed_print_layer_0="30.0" -s support="0" -s infill_mesh_order="0" -s spaghetti_infill_enabled="False" -s acceleration_support="3000" -s acceleration_support_roof="3000" -s support_roof_offset="0.0" -s material_extrusion_cool_down_speed="0.7" -s support_tree_branch_distance="1" -s meshfix_maximum_resolution="0.5" -s wipe_repeat_count="5" -s material_standby_temperature="150" -s brim_outside_only="True" -s machine_heated_build_volume="False" -s support_conical_angle="30" -s support_brim_enable="False" -s cool_fan_full_at_height="0.3" -s support_xy_overrides_z="z_overrides_xy" -s min_infill_area="0" -s machine_nozzle_tip_outer_diameter="1" -s support_pattern="lines" -s brim_replaces_support="True" -s adhesion_z_offset_extensive_processing="False" -s skirt_gap="3" -s support_tower_roof_angle="65" -s extruder_prime_pos_z="0" -s retraction_hop_after_extruder_switch_height="1" -s acceleration_prime_tower="3000" -s material_print_temp_prepend="True" -s wireframe_printspeed_down="5" -s wireframe_flow_connection="100" -s acceleration_skirt_brim="3000" -s meshfix="0" -s top_thickness="0.8" -s acceleration_enabled="False" -s support_roof_extruder_nr="0" -s support_roof_angles="[ ]" -s material_print_temp_wait="True" -s support_top_distance="0.1" -s retraction_hop_after_extruder_switch="True" -s support_roof_line_width="0.4" -s brim_gap="0" -s acceleration_support_infill="3000" -s bridge_sparse_infill_max_density="0" -s bridge_skin_speed_3="15.0" -s spaghetti_flow="20" -s magic_fuzzy_skin_point_dist="0.8" -s filter_out_tiny_gaps="True" -s jerk_print="20" -s minimum_roof_area="1.0" -s mesh_position_y="0" -s infill_randomize_start_location="False" -s fill_perimeter_gaps="everywhere" -s prime_tower_wipe_enabled="True" -s retraction_hop="1" -s jerk_wall_0="20" -s machine_name="Wanhao Duplicator i3 Plus" -s support_supported_skin_fan_speed="100" -s infill_wall_line_count="0" -s connect_infill_polygons="False" -s retraction_extrusion_window="6.5" -s support_fan_enable="False" -s machine_show_variants="False" -s skin_line_width="0.4" -s acceleration_infill="3000" -s travel_avoid_supports="False" -s ironing_pattern="zigzag" -s speed_travel="120" -s layer_0_z_overlap="0.15" -s machine_max_acceleration_y="9000" -s support_tree_enable="False" -s support_interface_offset="0.0" -s retraction_count_max="90" -s infill_offset_y="0" -s brim_line_count="12" -s support_roof_line_distance="0.4" -s prime_tower_line_width="0.4" -s anti_overhang_mesh="False" -s infill_material_flow="100" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s adhesion_type="skirt" -s material_linear_advance_factor_topbottom="0" -s wireframe_enabled="False" -s jerk_support_roof="20" -s machine_extruder_count="1" -s xy_offset_layer_0="0" -s adaptive_layer_height_enabled="False" -s spaghetti_infill_extra_volume="0" -s support_connect_zigzags="True" -s jerk_travel="30" -s layer_height_0="0.3" -s material_linear_advance_factor_skirt_brim="0" -s machine_nozzle_cool_down_speed="2.0" -s raft_airgap="0.3" -s material_flush_purge_speed="0.5" -s wireframe_strategy="compensate" -s machine_gcode_flavor="RepRap (Marlin/Sprinter)" -s wireframe_roof_fall_down="2" -s raft_acceleration="3000" -s small_hole_max_size="0" -s support_z_distance="0.1" -s meshfix_union_all="True" -s material="0" -s material_bed_temp_prepend="True" -s infill_before_walls="True" -s bridge_enable_more_layers="True" -s raft_base_acceleration="3000" -s wall_extruder_nr="-1" -s wireframe_drag_along="0.6" -s machine_nozzle_expansion_angle="45" -s machine_steps_per_mm_x="50" -s experimental="0" -s prime_tower_position_x="195.584" -s bridge_wall_min_length="5" -s wall_min_flow_retract="False" -s extruder_prime_pos_y="0" -s skin_material_flow="100" -s support_bottom_density="100" -s wall_0_material_flow="100" -s jerk_support="20" -s wall_line_width_x="0.4" -s roofing_extruder_nr="-1" -s raft_margin="15" -s machine_max_jerk_e="5.0" -s small_feature_max_length="0.0" -s skin_overlap_mm="0.02" -s support_interface_angles="[ ]" -s bottom_thickness="0.8" -s retraction_prime_speed="25" -s z_seam_type="sharpest_corner" -s material_linear_advance_factor_prime_tower="0" -s print_bed_temperature="63" -s support_bottom_enable="False" -s dual="0" -s support_roof_density="100" -s spaghetti_max_height="2.0" -s machine_max_feedrate_z="299792458000" -s support_infill_rate="15" -s travel_compensate_overlapping_walls_enabled="True" -s magic_fuzzy_skin_point_density="1.25" -s wireframe_bottom_delay="0" -s support_conical_enabled="False" -s material_anti_ooze_retraction_speed="5" -s support_interface_material_flow="100" -s infill_overlap="10" -s support_bottom_stair_step_height="0.3" -s adhesion_z_offset="0" -s bridge_wall_coast="100" -s skin_edge_support_layers="0" -s support_type="buildplate" -s bridge_skin_density="100" -s raft_base_fan_speed="0" -s support_tree_collision_resolution="0.2" -s support_initial_layer_line_distance="2.6666666666666665" -s gradual_support_infill_step_height="1" -s bridge_wall_speed="15.0" -s support_bottom_offset="0.0" -s minimum_bottom_area="1.0" -s infill_line_distance="4.0" -s raft_interface_speed="22.5" -s travel_avoid_distance="0.625" -s speed_prime_tower="60" -s extruder_prime_pos_abs="False" -s material_adhesion_tendency="10" -s infill_sparse_thickness="0.1" -s jerk_roofing="20" -s gradual_infill_step_height="1.5" -s machine_max_acceleration_x="9000" -s bridge_skin_material_flow_2="100" -s bridge_skin_material_flow="60" -s material_print_temperature="210" -s retraction_enable="True" -s support_line_distance="2.6666666666666665" -s draft_shield_enabled="False" -s wall_0_extruder_nr="-1" -s raft_interface_thickness="0.15000000000000002" -s xy_offset="0" -s jerk_prime_tower="20" -s skin_outline_count="1" -s support_bottom_line_width="0.4" -s retraction_extra_prime_amount="0" -s jerk_wall_x="20" -s small_feature_speed_factor_0="50" -s support_extruder_nr="0" -s meshfix_extensive_stitching="False" -s magic_fuzzy_skin_thickness="0.3" -s material_break_retracted_position="-50" -s material_initial_print_temperature="200" -s roofing_pattern="lines" -e0 -s acceleration_layer_0="3000" -s raft_surface_line_spacing="0.4" -s jerk_travel_layer_0="30.0" -s minimum_interface_area="1.0" -s machine_nozzle_offset_y="0" -s coasting_speed="90" -s switch_extruder_extra_prime_amount="0" -s roofing_material_flow="100" -s wall_line_width="0.4" -s material_break_preparation_temperature="217" -s slicing_tolerance="exclusive" -s machine_extruder_end_pos_y="0" -s support_bottom_density="100" -s skin_material_flow="100" -s top_skin_expand_distance="1.6" -s material_linear_advance_factor_support_interface="0" -s retract_at_layer_change="False" -s machine_extruder_start_pos_abs="False" -s material_linear_advance_factor_topbottom="0" -s outer_inset_first="False" -s cross_infill_density_image="" -s retraction_min_travel="0.8" -s support_interface_skip_height="0.3" -s bridge_skin_speed_2="10" -s speed_support_roof="20.0" -s platform_adhesion="0" -s raft_base_thickness="0.36" -s meshfix_union_all_remove_holes="False" -s skirt_line_count="4" -s infill_angles="[ ]" -s jerk_layer_0="20" -s support_roof_pattern="concentric" -s speed_print="30" -s material_guid="0ff92885-617b-4144-a03c-9989872454bc" -s roofing_pattern="lines" -s support_conical_min_width="5.0" -s raft_jerk="20" -s support_tower_maximum_supported_diameter="3.0" -s acceleration_wall_0="3000" -s speed_roofing="15.0" -s speed_wall_x="30.0" -s magic_mesh_surface_mode="normal" -s top_skin_preshrink="1.6" -s wipe_hop_amount="1" -s support_join_distance="2.0" -s gradual_infill_steps="0" -s mold_enabled="False" -s support_use_towers="True" -s minimum_support_area="0.0" -s limit_support_retractions="True" -s support_bottom_line_distance="0.4" -s machine_nozzle_offset_x="0" -s cool_fan_speed_max="80" -s cool_fan_enabled="True" -s wall_overhang_angle="90" -s support_line_distance="2.6666666666666665" -s retraction_enable="True" -s jerk_wall_0="20" -s retraction_hop="1" -s max_skin_angle_for_expansion="90" -s ironing_line_spacing="0.1" -s material_flow="100" -s support_offset="0" -s infill_overlap="14" -s support_interface_material_flow="100" -s extruder_nr="0" -s retraction_hop_enabled="False" -s switch_extruder_retraction_speed="20" -s acceleration_roofing="3000" -s raft_surface_acceleration="3000" -s mesh_position_z="0" -s conical_overhang_angle="50" -s infill_overlap_mm="0.05600000000000001" -s clean_between_layers="False" -s skin_preshrink="1.6" -s wipe_hop_speed="10" -s material_flush_purge_length="60" -s machine_nozzle_heat_up_speed="2.0" -s raft_interface_line_spacing="1.0" -s mold_roof_height="0.5" -s acceleration_ironing="3000" -s prime_tower_flow="100" -s ironing_flow="10.0" -s wall_min_flow="0" -s raft_surface_layers="2" -s skirt_brim_minimal_length="250" -s material_adhesion_tendency="0" -s extruder_prime_pos_abs="False" -s support_line_width="0.4" -s experimental="0" -s speed_ironing="10.0" -s support_interface_height="1" -s command_line_settings="0" -s material_linear_advance_factor_support="0" -s acceleration_wall_x="3000" -s bridge_skin_support_threshold="50" -s retraction_prime_speed="65" -s material_linear_advance_factor_prime_tower="0" -s z_seam_type="sharpest_corner" -s support_interface_line_width="0.4" -s support_bottom_angles="[ ]" -s support_skip_zag_per_mm="20" -s bottom_skin_expand_distance="1.6" -s support_connect_zigzags="True" -s spaghetti_infill_extra_volume="0" -s connect_skin_polygons="False" -s infill_pattern="grid" -s raft_base_jerk="20" -s jerk_infill="20" -s machine_steps_per_mm_x="50" -s coasting_enable="False" -s support_interface_density="100" -s retraction_hop_after_extruder_switch="True" -s support_top_distance="0.1" -s jerk_support="20" -s wall_line_width_x="0.4" -s bridge_skin_material_flow_3="110" -s support_interface_pattern="concentric" -s bridge_fan_speed_2="0" -s initial_bottom_layers="6" -s wipe_retraction_retract_speed="65" -s multiple_mesh_overlap="0.15" -s material_linear_advance_factor_infill="0" -s magic_fuzzy_skin_enabled="False" -s wipe_hop_enable="False" -s zig_zaggify_support="False" -s wipe_pause="0" -s wipe_retraction_prime_speed="65" -s jerk_support_bottom="20" -s material_no_load_move_factor="0.940860215" -s material_flow_layer_0="100" -s wall_material_flow="100" -s raft_speed="15.0" -s mold_angle="40" -s machine_settings="0" -s acceleration_topbottom="3000" -s z_seam_position="back" -s cooling="0" -s cool_min_layer_time_fan_speed_max="10" -s support_roof_material_flow="100" -s support_tree_angle="40" -s cross_infill_pocket_size="2.5" -s wall_line_width_0="0.4" -s material_break_speed="25" -s speed_wall_0="15.0" -s cool_lift_head="False" -s connect_infill_polygons="False" -s machine_extruder_start_code="" -s machine_min_cool_heat_time_window="50.0" -s layer_start_x="0.0" -s support_wall_count="0" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s skin_edge_support_thickness="0" -s switch_extruder_prime_speed="20" -s extruder_prime_pos_x="0" -s layer_start_y="0.0" -s infill_wipe_dist="0.1" -s cool_min_speed="10" -s travel="0" -s initial_layer_line_width_factor="104.0" -s magic_fuzzy_skin_outside_only="False" -s infill_line_width="0.4" -s acceleration_support_interface="3000" -s spaghetti_max_infill_angle="10" -s material_end_of_filament_purge_speed="0.5" -s raft_margin="15" -s machine_endstop_positive_direction_z="True" -s coasting_volume="0.064" -s speed="0" -s material_diameter="1.75" -s speed_z_hop="10" -s raft_interface_jerk="20" -s material_shrinkage_percentage="0" -s machine_nozzle_size="0.4" -s top_layers="6" -s infill_multiplier="1" -s spaghetti_inset="0.2" -s alternate_extra_perimeter="False" -s support_roof_enable="True" -s top_bottom_pattern_0="lines" -s meshfix_maximum_travel_resolution="0.8" -s dual="0" -s support_bottom_enable="False" -s jerk_wall="20" -s travel_avoid_other_parts="True" -s acceleration_print_layer_0="3000" -s support_bottom_pattern="concentric" -s material_linear_advance_factor_wall_x="0" -s acceleration_print="3000" -s material_break_temperature="50" -s wipe_retraction_amount="2.5" -s material_initial_print_temperature="207" -s material_break_retracted_position="-50" -s machine_heat_zone_length="16" -s jerk_skirt_brim="20" -s bottom_layers="6" -s material_flow_dependent_temperature="False" -s switch_extruder_retraction_speeds="20" -s travel_compensate_overlapping_walls_0_enabled="True" -s skin_angles="[ ]" -s machine_steps_per_mm_z="50" -s speed_topbottom="15.0" -s raft_smoothing="5" -s support_skip_some_zags="False" -s wall_x_material_flow="100" -s min_skin_width_for_expansion="3.67394039744206e-17" -s machine_extruder_end_pos_x="0" -s prime_tower_min_volume="6" -s jerk_support_interface="20" -s infill_sparse_density="32" -s jerk_print_layer_0="20" -s material_anti_ooze_retracted_position="-4" -s infill_enable_travel_optimization="False" -s speed_layer_0="12" -s raft_surface_speed="15.0" -s support_supported_skin_fan_speed="100" -s infill_wall_line_count="0" -s support_xy_distance_overhang="0.2" -s speed_equalize_flow_max="150" -s material_break_preparation_retracted_position="-16" -s raft_surface_line_width="0.4" -s acceleration_wall="3000" -s support_bottom_material_flow="100" -s acceleration_travel="5000" -s ironing_enabled="False" -s support_bottom_stair_step_height="0.3" -s brim_outside_only="True" -s material_standby_temperature="175" -s machine_steps_per_mm_e="1600" -s support_bottom_distance="0" -s wall_thickness="0.8" -s material_crystallinity="False" -s support_initial_layer_line_distance="2.6666666666666665" -s meshfix_union_all="True" -s support_z_distance="0.1" -s retraction_hop_only_when_collides="False" -s machine_feeder_wheel_diameter="10.0" -s speed_travel="150" -s layer_0_z_overlap="0.15" -s support_angle="70" -s raft_base_speed="11.25" -s ironing_pattern="zigzag" -s brim_gap="0" -s acceleration_support_infill="3000" -s support_roof_line_width="0.4" -s gradual_support_infill_steps="0" -s bridge_skin_density_3="80" -s support_interface_enable="False" -s brim_width="8.0" -s speed_support_infill="30" -s raft_base_line_spacing="1.6" -s max_extrusion_before_wipe="10" -s wall_0_inset="0" -s material="0" -s infill_before_walls="True" -s small_hole_max_size="0" -s raft_surface_jerk="20" -s infill_support_angle="40" -s cool_fan_speed_min="80" -s wipe_move_distance="20" -s bridge_fan_speed_3="0" -s ironing_inset="0.2" -s support_roof_density="100" -s spaghetti_max_height="2.0" -s retraction_retract_speed="65" -s zig_zaggify_infill="False" -s meshfix_maximum_resolution="0.5" -s wipe_repeat_count="5" -s support_tree_branch_distance="1" -s top_bottom_thickness="0.8" -s skirt_brim_speed="12" -s switch_extruder_retraction_amount="16" -s material_maximum_park_duration="300" -s machine_nozzle_temp_enabled="True" -s machine_endstop_positive_direction_x="False" -s material_final_print_temperature="202" -s retraction_extrusion_window="2.5" -s support_fan_enable="False" -s machine_extruder_start_pos_y="0" -s material_surface_energy="100" -s raft_interface_line_width="0.8" -s infill_offset_x="0" -s z_seam_x="100.0" -s retraction_combing_max_distance="0" -s speed_equalize_flow_enabled="False" -s machine_extruder_start_pos_x="0" -s support_tower_diameter="3.0" -s bridge_skin_density_2="75" -s retraction_amount="2.5" -s wipe_retraction_speed="65" -s raft_interface_acceleration="3000" -s raft_surface_fan_speed="0" -s spaghetti_infill_stepped="True" -s support_xy_distance="0.7" -s speed_wall="15.0" -s sub_div_rad_add="0.4" -s bottom_skin_preshrink="1.6" -s small_feature_speed_factor_0="50" -s jerk_support_infill="20" -s wall_overhang_speed_factor="100" -s mold_width="5" -s material_linear_advance_factor_wall_0="0" -s wall_0_wipe_dist="0.2" -s support_bottom_stair_step_width="5.0" -s bridge_fan_speed="100" -s support_material_flow="100" -s raft_base_acceleration="3000" -s wipe_retraction_enable="True" -s material_linear_advance_factor="0" -s cool_min_layer_time="5" -s support_infill_sparse_thickness="0.1" -s support_roof_height="1.2" -s cool_fan_full_layer="2" -s center_object="False" -s skirt_brim_line_width="0.4" -s top_bottom_pattern="lines" -s skin_overlap="5" -s speed_infill="30" -s wipe_retraction_extra_prime_amount="0" -s z_seam_relative="False" -s cross_support_density_image="" -s roofing_angles="[ ]" -s jerk_ironing="20" -s infill_sparse_thickness="0.1" -s brim_line_count="12" -s support_roof_line_distance="0.4" -s prime_tower_line_width="0.4" -s mesh_position_x="0" -s expand_skins_expand_distance="1.6" -s small_feature_speed_factor="50" -s roofing_line_width="0.4" -s conical_overhang_enabled="False" -s speed_travel_layer_0="60.0" -s line_width="0.4" -s optimize_wall_printing_order="False" -s prime_blob_enable="False" -s meshfix_keep_open_polygons="False" -s meshfix_extensive_stitching="False" -s magic_fuzzy_skin_thickness="0.3" -s resolution="0" -s raft_surface_thickness="0.1" -s acceleration_travel_layer_0="5000.0" -s wipe_brush_pos_x="100" -s machine_nozzle_id="unknown" -s material_linear_advance_factor_wall="0" -s coasting_min_volume="0.8" -s cool_fan_speed="80" -s support_bottom_line_width="0.4" -s support_zag_skip_count="8" -s fill_outline_gaps="False" -s machine_filament_park_distance="16" -s speed_print_layer_0="12" -s support="0" -s spaghetti_infill_enabled="False" -s retraction_hop_after_extruder_switch_height="1" -s machine_extruder_end_pos_abs="False" -s acceleration_support="3000" -s acceleration_support_roof="3000" -s support_roof_offset="0.0" -s skin_no_small_gaps_heuristic="False" -s fill_perimeter_gaps="everywhere" -s prime_tower_wipe_enabled="True" -s speed_support="30" -s material_end_of_filament_purge_length="20" -s material_break_preparation_speed="2" -s acceleration_support_bottom="3000" -s extruder_prime_pos_y="0" -s wall_min_flow_retract="False" -s retraction_count_max="90" -s support_xy_overrides_z="z_overrides_xy" -s machine_nozzle_tip_outer_diameter="1" -s min_infill_area="0" -s infill_offset_y="0" -s ironing_only_highest_layer="False" -s small_feature_max_length="0.0" -s skin_overlap_mm="0.02" -s support_interface_angles="[ ]" -s bottom_thickness="0.8" -s bridge_sparse_infill_max_density="0" -s support_pattern="lines" -s bridge_skin_speed_3="10" -s spaghetti_flow="20" -s magic_fuzzy_skin_point_dist="0.8" -s filter_out_tiny_gaps="True" -s jerk_print="20" -s skin_edge_support_layers="0" -s meshfix_maximum_deviation="0.05" -s machine_extruder_end_code="" -s skin_line_width="0.4" -s skirt_gap="3" -s acceleration_prime_tower="3000" -s support_tower_roof_angle="65" -s extruder_prime_pos_z="0" -s xy_offset_layer_0="0" -s acceleration_infill="3000" -s travel_avoid_supports="False" -s support_interface_offset="0.0" -s meshfix="0" -s acceleration_skirt_brim="3000" -s speed_support_bottom="20.0" -s material_extrusion_cool_down_speed="0.7" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s machine_nozzle_head_distance="3" -s support_brim_width="8.0" -s mesh_position_y="0" -s infill_randomize_start_location="False" -s bridge_skin_speed="10" -s skirt_brim_material_flow="100" -s infill_material_flow="100" -s shell="0" -s support_infill_angles="[ ]" -s cool_fan_speed_0="0" -s blackmagic="0" -s support_brim_line_count="20" -s infill_support_enabled="False" -s top_thickness="0.8" -s jerk_travel="30" -s material_linear_advance_factor_skirt_brim="0" -s machine_nozzle_cool_down_speed="2.0" -s raft_airgap="0.3" -s material_flush_purge_speed="0.5" -s support_bottom_height="1" -s raft_acceleration="3000" -s bridge_enable_more_layers="True" -s infill="0" -s speed_prime_tower="30" -s raft_base_line_width="0.8" -s bridge_skin_density="100" -s support_tree_branch_diameter_angle="5" -s raft_base_fan_speed="0" -s support_tree_collision_resolution="0.2" -s travel_compensate_overlapping_walls_x_enabled="True" -s machine_extruder_cooling_fan_number="0" -s minimum_roof_area="1.0" -s bridge_wall_material_flow="50" -s travel_avoid_distance="0.625" -s raft_interface_speed="11.25" -s bridge_skin_material_flow="60" -s material_print_temperature="217" -s support_infill_rate="15" -s travel_compensate_overlapping_walls_enabled="True" -s wall_line_count="4" -s magic_fuzzy_skin_point_density="1.25" -s support_roof_angles="[ ]" -s machine_steps_per_mm_y="50" -s support_tree_branch_diameter="2" -s default_material_print_temperature="200" -s roofing_layer_count="0" -s z_seam_corner="z_seam_corner_inner" -s support_conical_enabled="False" -s material_anti_ooze_retraction_speed="5" -s retraction_extra_prime_amount="0" -s jerk_topbottom="20" -s raft_interface_fan_speed="0" -s bridge_wall_coast="100" -s retraction_speed="65" -s wall_0_material_flow="100" -s support_conical_angle="30" -s support_brim_enable="False" -s cool_fan_full_at_height="0.3" -s gradual_support_infill_step_height="1" -s bridge_wall_speed="10" -s support_bottom_offset="0.0" -s infill_line_distance="2.5" -s minimum_bottom_area="1.0" -s jerk_roofing="20" -s gradual_infill_step_height="1.5" -s material_print_temperature_layer_0="217" -s speed_support_interface="20.0" -s bridge_skin_material_flow_2="100" -s raft_interface_thickness="0.15000000000000002" -s xy_offset="0" -s jerk_prime_tower="20" -s skin_outline_count="1" -s jerk_wall_x="20" -s brim_replaces_support="True" -s z_seam_y="200" -s raft_fan_speed="0" -s jerk_support_roof="20" -s machine_endstop_positive_direction_y="False" -g -e0 -l "0" -s extruder_nr="0"
2020-03-11 17:56:50,681 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-03-11 17:56:53,255 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 152 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-11 17:56:53,317 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-11 17:56:53,320 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-11 17:56:53,342 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [663]: Slicing took 7.356343030929565 seconds
2020-03-11 17:56:53,342 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [664]: Number of models per buildplate: {0: 1}
2020-03-11 17:56:53,342 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [678]: See if there is more to slice...
2020-03-11 17:56:53,547 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [181]: Socket state changed to Closing
2020-03-11 17:56:53,551 - DEBUG - [MainThread] UM.Backend.Backend._onSocketError [203]: Socket debug: Arcus Error (13): Closing socket because other side requested close.
2020-03-11 17:56:53,554 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [183]: Socket state changed to Closed
2020-03-11 17:56:53,554 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onBackendQuit [829]: Backend quit with return code 0. Resetting process and socket.
2020-03-11 17:57:03,947 - DEBUG - [MainThread] LinearAdvanceSettingPlugin.LinearAdvanceSettingPlugin._filterGcode [109]: No used extruders specify a linear advance factor
2020-03-11 17:57:04,172 - DEBUG - [MainThread] UM.Controller.setActiveStage [149]: Setting active stage to MonitorStage
2020-03-11 17:57:04,190 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/SidebarGUIPlugin/SidebarGUIPlugin/resources/qml/MonitorStageMenu.qml:23: TypeError: Cannot read property 'children' of undefined
2020-03-11 17:57:04,298 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:211: Error: Cannot assign [undefined] to QString
2020-03-11 17:57:04,342 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._processRequest [308]: Request [4a5810f95e6343d2bcdc92e6d2014769] started
2020-03-11 17:57:04,345 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-11 17:57:04,849 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestFinished [369]: Request [4a5810f95e6343d2bcdc92e6d2014769] finished.
2020-03-11 17:57:04,851 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-11 17:57:04,853 - INFO - [MainThread] SliceInfoPlugin.SliceInfo._onRequestFinished [275]: SliceInfo sent successfully
2020-03-11 17:57:16,799 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-03-11 17:57:18,868 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onUploadFinished [1012]: Resource created on OctoPrint instance: http://octolinux:5003/api/files/local/WDI3P_GT2_pulley_support_1p0.gcode
2020-03-11 17:57:18,999 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [891]: OctoPrint file command accepted
2020-03-11 17:57:27,166 - DEBUG - [MainThread] UM.Controller.setActiveStage [149]: Setting active stage to PrepareStage
2020-03-11 17:57:27,199 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-11 17:57:27,203 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/SidebarGUIPlugin/SidebarGUIPlugin/resources/qml/SidebarFooter.qml:45: TypeError: Type error
2020-03-11 17:57:27,230 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-11 17:57:27,233 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-11 17:57:27,309 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/SidebarGUIPlugin/SidebarGUIPlugin/resources/qml/ProfileSelector44.qml:38:5: QML Button: Binding loop detected for property "implicitWidth"
2020-03-11 17:57:27,326 - DEBUG - [MainThread] cura.CuraApplication.log [1636]: SidebarGUIPlugin patching interface for Cura 4.5 and newer
2020-03-11 17:57:27,330 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-11 17:57:27,335 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-11 17:57:27,373 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:79: ReferenceError: stop is not defined
2020-03-11 17:57:27,377 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:63: TypeError: Cannot read property of null
2020-03-11 17:57:27,380 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:91: TypeError: Cannot read property of null
2020-03-11 17:57:27,383 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:102: TypeError: Cannot read property of null
2020-03-11 17:57:27,385 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:103: TypeError: Cannot read property of null
2020-03-11 17:57:27,388 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:139: TypeError: Cannot read property of null
2020-03-11 17:57:27,390 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:140: TypeError: Cannot read property of null
2020-03-11 17:57:27,393 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:120: TypeError: Cannot read property of null
2020-03-11 17:57:27,396 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:122: TypeError: Cannot read property of null
2020-03-11 17:57:27,398 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-03-11 17:57:27,401 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:36: TypeError: Cannot read property of null
2020-03-11 17:57:27,404 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:37: TypeError: Cannot read property of null
2020-03-11 17:57:27,407 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:49: TypeError: Cannot read property of null
2020-03-11 17:57:27,410 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:59: TypeError: Cannot read property of null
2020-03-11 17:57:27,414 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:61: TypeError: Cannot read property of null
2020-03-11 17:57:27,418 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:63: TypeError: Cannot read property of null
2020-03-11 17:57:27,421 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ExtruderBox.qml:20: TypeError: Cannot read property of null
2020-03-11 17:57:27,425 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:29: TypeError: Cannot read property of null
2020-03-11 17:57:27,428 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:30: TypeError: Cannot read property of null
2020-03-11 17:57:27,435 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:40: TypeError: Cannot read property of null
2020-03-11 17:57:27,442 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:73: TypeError: Cannot read property of null
2020-03-11 17:57:27,448 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:135: TypeError: Cannot read property of null
2020-03-11 17:57:27,453 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:246: TypeError: Cannot read property of null
2020-03-11 17:57:27,459 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:247: TypeError: Cannot read property of null
2020-03-11 17:57:27,466 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:173: TypeError: Cannot read property of null
2020-03-11 17:57:27,472 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:175: TypeError: Cannot read property of null
2020-03-11 17:57:27,478 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:190: TypeError: Cannot read property of null
2020-03-11 17:57:27,484 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:193: TypeError: Cannot read property of null
2020-03-11 17:57:27,491 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:60: TypeError: Cannot read property of null
2020-03-11 17:57:27,498 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:248: TypeError: Cannot read property of null
2020-03-11 17:57:27,503 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:294: TypeError: Cannot read property of null
2020-03-11 17:57:27,508 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:26: TypeError: Cannot read property of null
2020-03-11 17:57:27,513 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:27: TypeError: Cannot read property of null
2020-03-11 17:57:27,518 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:388: TypeError: Cannot read property of null
2020-03-11 17:57:27,524 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:390: TypeError: Cannot read property of null
2020-03-11 17:57:27,530 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:391: TypeError: Cannot read property of null
2020-03-11 17:57:27,536 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:26: TypeError: Cannot read property of null
2020-03-11 17:57:27,542 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:27: TypeError: Cannot read property of null
2020-03-11 17:57:27,546 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:24: TypeError: Cannot read property of null
2020-03-11 17:57:27,549 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:30: TypeError: Cannot read property of null
2020-03-11 17:57:27,552 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:39: TypeError: Cannot read property of null
2020-03-11 17:57:27,555 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:24: TypeError: Cannot read property of null
2020-03-11 17:57:27,559 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:30: TypeError: Cannot read property of null
2020-03-11 17:57:27,563 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:39: TypeError: Cannot read property of null
2020-03-11 17:57:27,566 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:24: TypeError: Cannot read property of null
2020-03-11 17:57:27,570 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:30: TypeError: Cannot read property of null
2020-03-11 17:57:27,573 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:39: TypeError: Cannot read property of null
2020-03-11 17:57:27,578 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupTooltip.qml:67: TypeError: Cannot read property of null
2020-03-11 17:57:27,582 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupTooltip.qml:69: TypeError: Cannot read property of null
2020-03-11 17:57:27,586 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupTooltip.qml:71: TypeError: Cannot read property of null
2020-03-11 17:57:27,589 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:150: TypeError: Cannot read property of null
2020-03-11 17:57:27,592 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-03-11 17:57:27,595 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:166: TypeError: Cannot read property of null
2020-03-11 17:57:27,598 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:167: TypeError: Cannot read property of null
2020-03-11 17:57:27,602 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:178: TypeError: Cannot read property of null
2020-03-11 17:57:27,607 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:231: TypeError: Cannot read property of null
2020-03-11 17:57:27,611 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:241: TypeError: Cannot read property of null
2020-03-11 18:40:10,493 - INFO - [MainThread] cura.UI.MachineActionManager.addDefaultMachineActions [56]: Default machine actions have been added for machine definition [wanhao_i3plus], do nothing.
2020-03-11 18:40:10,727 - INFO - [MainThread] cura.Settings.GlobalStack.addExtruder [184]: Extruder[wanhao_i3plus_extruder_0 #3] added to [GreyLeader] at position [0]
2020-03-11 18:40:10,730 - WARNING - [MainThread] cura.Settings.ExtruderManager.registerExtruder [156]: Extruder [wanhao_i3plus_extruder_0 #3] has already been registered on machine [GreyLeader], not doing anything
2020-03-11 18:40:10,734 - INFO - [MainThread] UM.Logger.info [112]: Initializing Active Machine...
2020-03-11 18:40:10,746 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-11 18:40:10,749 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-11 18:40:10,965 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/SettingsMenu.qml:51: TypeError: Cannot read property 'isEnabled' of undefined
2020-03-11 18:40:10,967 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/SettingsMenu.qml:44: TypeError: Cannot read property 'isEnabled' of undefined
2020-03-11 18:40:10,971 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/MaterialMenu.qml:26: TypeError: Cannot read property 'isEnabled' of undefined
2020-03-11 18:40:10,973 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/MaterialMenu.qml:28: TypeError: Cannot read property 'material' of undefined
2020-03-11 18:40:10,976 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-11 18:40:11,049 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-11 18:40:11,069 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-11 18:40:11,076 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-11 18:40:11,355 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [135]: New error check scheduled.
2020-03-11 18:40:12,161 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-11 18:40:12,176 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [63]: Updating QualityProfilesDropDownMenuModel.
2020-03-11 18:40:12,865 - INFO - [MainThread] cura.Machines.MachineErrorChecker._setResult [187]: Error check finished, result = False, time = 1.5s
2020-03-11 18:40:15,615 - INFO - [MainThread] UM.Controller.deleteAllNodesWithMeshData [386]: Clearing scene
2020-03-11 18:40:15,619 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: GroupedOp.(#=1) <UM.Operations.RemoveSceneNodeOperation.RemoveSceneNodeOperation object at 0x600014351918>, took 0ms
2020-03-11 18:40:15,622 - INFO - [MainThread] cura.CuraApplication._removeNodesWithLayerData [1900]: Clearing scene
2020-03-11 18:40:16,366 - WARNING - [MainThread] cura.UI.PrintInformation.setBaseName [360]: Unsupported Mime Type Database file extension 
2020-03-11 18:40:20,736 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-03-11 18:40:25,237 - INFO - [Thread-7] STLReader.STLReader.load_file [51]: Using NumPy-STL to load STL data.
2020-03-11 18:40:25,584 - DEBUG - [Thread-7] UM.Mesh.MeshData.calculateNormalsFromVertices [495]: Calculating normals took 0.0006589889526367188 seconds
2020-03-11 18:40:25,585 - DEBUG - [Thread-7] STLReader.STLReader._read [102]: Loaded a mesh with 35922 vertices
2020-03-11 18:40:25,607 - DEBUG - [Thread-7] UM.Mesh.MeshData.approximateConvexHull [452]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.015759944915771484 seconds. 154 input vertices. 154 output vertices.
2020-03-11 18:40:25,619 - DEBUG - [Thread-7] UM.FileHandler.ReadFileJob.run [71]: Loading file took 0.4 seconds
2020-03-11 18:40:25,639 - DEBUG - [Thread-7] UM.Mesh.MeshData.approximateConvexHull [452]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.014761924743652344 seconds. 154 input vertices. 154 output vertices.
2020-03-11 18:40:25,671 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: <UM.Operations.AddSceneNodeOperation.AddSceneNodeOperation object at 0x600014339b98>, took 11ms
2020-03-11 18:40:33,230 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [135]: New error check scheduled.
2020-03-11 18:40:33,479 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._checkStack [139]: Need to check for errors again. Discard the current progress and reschedule a check.
2020-03-11 18:40:33,593 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [135]: New error check scheduled.
2020-03-11 18:40:33,973 - INFO - [MainThread] cura.Machines.MachineErrorChecker._setResult [187]: Error check finished, result = False, time = 0.4s
2020-03-11 18:40:51,619 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [225]: Starting to slice...
2020-03-11 18:40:51,619 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [243]: Going to slice build plate [0]!
2020-03-11 18:40:51,629 - DEBUG - [MainThread] UM.Backend.Backend._createSocket [213]: Previous socket existed. Closing that first.
2020-03-11 18:40:51,636 - WARNING - [Thread-8] UM.Decorators.deprecated_function [20]: <function GlobalStack.extruders at 0x600006aa24a8> is deprecated (since 4.4): Please use extruderList instead.
2020-03-11 18:40:51,670 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [173]: Socket state changed to Listening
2020-03-11 18:40:51,749 - INFO - [MainThread] UM.Backend.Backend.startEngine [81]: Started engine process: /Applications/Ultimaker Cura 3.app/Contents/MacOS/CuraEngine
2020-03-11 18:40:51,805 - DEBUG - [MainThread] UM.Backend.Backend._backendLog [101]: [Backend] Calling engine with: ['/Applications/Ultimaker Cura 3.app/Contents/MacOS/CuraEngine', 'connect', '127.0.0.1:49674', '']
2020-03-11 18:40:51,868 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-03-11 18:40:51,871 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [177]: Socket state changed to Connected
2020-03-11 18:40:51,873 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] Cura_SteamEngine version 4.5.0
2020-03-11 18:40:51,875 - DEBUG - [MainThread] UM.Backend.Backend._onSocketStateChanged [167]: Backend connected on port 49674
2020-03-11 18:40:51,877 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] Copyright (C) 2019 Ultimaker
2020-03-11 18:40:51,880 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-03-11 18:40:51,884 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] This program is free software: you can redistribute it and/or modify
2020-03-11 18:40:51,889 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] it under the terms of the GNU Affero General Public License as published by
2020-03-11 18:40:51,892 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] the Free Software Foundation, either version 3 of the License, or
2020-03-11 18:40:51,894 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] (at your option) any later version.
2020-03-11 18:40:51,896 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-03-11 18:40:51,898 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] This program is distributed in the hope that it will be useful,
2020-03-11 18:40:51,901 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] but WITHOUT ANY WARRANTY; without even the implied warranty of
2020-03-11 18:40:51,903 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
2020-03-11 18:40:51,906 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] GNU Affero General Public License for more details.
2020-03-11 18:40:51,908 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-03-11 18:40:51,910 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] You should have received a copy of the GNU Affero General Public License
2020-03-11 18:40:51,912 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] along with this program.  If not, see <http://www.gnu.org/licenses/>.
2020-03-11 18:40:52,000 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onStartSliceCompleted [429]: Sending slice message took 0.3803098201751709 seconds
2020-03-11 18:40:52,268 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING]  -s acceleration_layer_0="3000" -s raft_surface_line_spacing="0.4" -s jerk_travel_layer_0="30.0" -s minimum_interface_area="1.0" -s slicing_tolerance="middle" -s coasting_speed="90" -s switch_extruder_extra_prime_amount="0" -s roofing_material_flow="100" -s wall_line_width="0.4" -s material_break_preparation_temperature="210" -s top_skin_expand_distance="0.8" -s material_linear_advance_factor_support_interface="0" -s retract_at_layer_change="False" -s material_bed_temperature="66" -s machine_width="200" -s machine_max_feedrate_y="299792458000" -s smooth_spiralized_contours="True" -s prime_tower_brim_enable="False" -s outer_inset_first="False" -s adaptive_layer_height_variation="0.1" -s cross_infill_density_image="" -s retraction_min_travel="0.8" -s support_interface_skip_height="0.3" -s bridge_skin_speed_2="15.0" -s date="11-03-2020" -s speed_support_roof="20.0" -s platform_adhesion="0" -s raft_base_thickness="0.36" -s meshfix_union_all_remove_holes="False" -s skirt_line_count="4" -s infill_angles="[ ]" -s jerk_layer_0="20" -s speed_print="60" -s print_temperature="210" -s material_guid="" -s default_material_bed_temperature="60" -s initial_extruder_nr="0" -s support_conical_min_width="5.0" -s raft_jerk="20" -s nozzle_disallowed_areas="[]" -s support_interface_extruder_nr="0" -s support_tower_maximum_supported_diameter="3.0" -s acceleration_wall_0="3000" -s speed_roofing="30.0" -s speed_wall_x="60.0" -s magic_mesh_surface_mode="normal" -s top_skin_preshrink="0.8" -s wipe_hop_amount="1" -s support_join_distance="2.0" -s gradual_infill_steps="0" -s raft_surface_line_width="0.4" -s top_bottom_extruder_nr="-1" -s mold_enabled="False" -s support_use_towers="True" -s minimum_support_area="0.0" -s limit_support_retractions="True" -s support_bottom_line_distance="0.4" -s coasting_enable="False" -s bridge_settings_enabled="False" -s machine_max_acceleration_e="10000" -s max_skin_angle_for_expansion="90" -s wireframe_flow="100" -s ironing_line_spacing="0.1" -s raft_interface_acceleration="3000" -s infill_enable_travel_optimization="False" -s support_bottom_height="1" -s clean_between_layers="False" -s prime_tower_size="20" -s prime_tower_enable="False" -s raft_surface_acceleration="3000" -s skin_preshrink="0.8" -s support_interface_line_width="0.4" -s wipe_hop_speed="10" -s speed_layer_0="30.0" -s machine_start_gcode="" -s initial_layer_line_width_factor="100.0" -s material_end_of_filament_purge_speed="0.5" -s mold_roof_height="0.5" -s machine_nozzle_head_distance="3" -s acceleration_ironing="3000" -s prime_tower_flow="100" -s raft_interface_fan_speed="0" -s raft_surface_layers="2" -s skirt_brim_minimal_length="250" -s support_bottom_angles="[ ]" -s speed_support_bottom="20.0" -s raft_fan_speed="0" -s machine_max_feedrate_x="299792458000" -s raft_base_line_width="0.8" -s speed_ironing="20.0" -s support_interface_height="1" -s support_infill_extruder_nr="0" -s speed_support_interface="40.0" -s wireframe_flat_delay="0.1" -s command_line_settings="0" -s speed_support="60" -s infill="0" -s material_shrinkage_percentage="0" -s raft_interface_jerk="20" -s minimum_polygon_circumference="1.0" -s material_linear_advance_factor_support="0" -s brim_width="8.0" -s alternate_extra_perimeter="False" -s support_roof_enable="True" -s bridge_skin_support_threshold="50" -s retraction_retract_speed="25" -s material_print_temperature_layer_0="210" -s cool_fan_full_layer="2" -s roofing_angles="[ ]" -s support_enable="False" -s wall_line_count="2" -s support_bottom_pattern="concentric" -s ooze_shield_angle="60" -s machine_endstop_positive_direction_x="False" -s wireframe_top_jump="0.6" -s support_skip_zag_per_mm="20" -s bottom_skin_expand_distance="0.8" -s adaptive_layer_height_variation_step="0.01" -s raft_surface_jerk="20" -s connect_skin_polygons="False" -s infill_pattern="grid" -s extruders_enabled_count="1" -s support_tower_diameter="3.0" -s wall_x_material_flow="100" -s jerk_infill="20" -s cutting_mesh="False" -s machine_max_jerk_xy="20.0" -s support_interface_density="100" -s material_end_of_filament_purge_length="20" -s acceleration_support_bottom="3000" -s material_break_preparation_speed="2" -s wireframe_roof_drag_along="0.8" -s bridge_skin_material_flow_3="110" -s support_interface_pattern="concentric" -s bridge_fan_speed_2="0" -s initial_bottom_layers="8" -s wipe_retraction_retract_speed="25" -s multiple_mesh_overlap="0.15" -s draft_shield_height_limitation="full" -s wireframe_printspeed_flat="5" -s material_linear_advance_factor_infill="0" -s magic_fuzzy_skin_enabled="False" -s jerk_enabled="False" -s wipe_pause="0" -s wipe_retraction_prime_speed="25" -s jerk_support_bottom="20" -s material_no_load_move_factor="0.940860215" -s retraction_combing="all" -s material_flow_layer_0="100" -s wall_material_flow="100" -s raft_speed="30.0" -s mold_angle="40" -s machine_end_gcode="" -s machine_center_is_zero="False" -s wireframe_up_half_speed="0.3" -s machine_settings="0" -s acceleration_topbottom="3000" -s z_seam_position="back" -s magic_spiralize="False" -s meshfix_maximum_deviation="0.05" -s wall_overhang_angle="90" -s cool_fan_enabled="True" -s cool_fan_speed_max="100.0" -s cooling="0" -s draft_shield_dist="10" -s cool_min_layer_time_fan_speed_max="10" -s wipe_retraction_enable="True" -s day="Wed" -s machine_max_jerk_z="0.4" -s support_tree_angle="40" -s cross_infill_pocket_size="4.0" -s wall_line_width_0="0.4" -s support_offset="0" -s wireframe_fall_down="0.5" -s material_flow="100" -s material_break_speed="25" -s machine_extruders_share_heater="False" -s speed_wall_0="30.0" -s cool_lift_head="False" -s wall_0_inset="0" -s relative_extrusion="False" -s machine_min_cool_heat_time_window="50.0" -s layer_start_x="0.0" -s machine_max_acceleration_z="100" -s support_wall_count="1" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s skin_edge_support_thickness="0" -s wall_x_extruder_nr="-1" -s switch_extruder_prime_speed="20" -s extruder_prime_pos_x="0" -s build_volume_temperature="28" -s layer_start_y="0.0" -s infill_wipe_dist="0.1" -s cool_min_speed="10" -s wall_min_flow="0" -s ironing_flow="10.0" -s travel="0" -s magic_fuzzy_skin_outside_only="False" -s infill_line_width="0.4" -s meshfix_maximum_travel_resolution="0.8" -s support_extruder_nr_layer_0="0" -s acceleration_support_interface="3000" -s spaghetti_max_infill_angle="10" -s support_mesh_drop_down="True" -s wipe_hop_enable="False" -s zig_zaggify_support="False" -s machine_depth="190" -s material_bed_temp_wait="True" -s machine_endstop_positive_direction_z="True" -s coasting_volume="0.064" -s mesh_position_x="0" -s prime_tower_position_y="165.6" -s material_linear_advance_factor_wall_0="0" -s wall_0_wipe_dist="0.2" -s travel_speed="120" -s speed="0" -s flow_rate_max_extrusion_offset="0" -s material_diameter="2.85" -s infill_overlap_mm="0.04" -s mesh_position_z="0" -s conical_overhang_angle="50" -s zig_zaggify_infill="False" -s speed_z_hop="10" -s machine_nozzle_size="0.4" -s top_layers="8" -s infill_multiplier="1" -s spaghetti_inset="0.2" -s top_bottom_pattern_0="lines" -s jerk_wall="20" -s travel_avoid_other_parts="True" -s acceleration_print_layer_0="3000" -s material_break_temperature="50" -s wipe_retraction_amount="6.5" -s machine_heat_zone_length="16" -s jerk_skirt_brim="20" -s raft_base_line_spacing="1.6" -s speed_support_infill="60" -s max_extrusion_before_wipe="10" -s bottom_layers="8" -s material_flow_dependent_temperature="False" -s machine_firmware_retract="False" -s switch_extruder_retraction_speeds="20" -s material_linear_advance_factor_wall_x="0" -s acceleration_print="3000" -s machine_use_extruder_offset_to_offset_coords="True" -s machine_heated_bed="True" -s travel_compensate_overlapping_walls_0_enabled="True" -s skin_angles="[ ]" -s machine_steps_per_mm_z="50" -s speed_topbottom="30.0" -s raft_smoothing="5" -s support_line_width="0.4" -s ooze_shield_enabled="False" -s support_skip_some_zags="False" -s min_skin_width_for_expansion="4.898587196589413e-17" -s machine_endstop_positive_direction_y="False" -s wireframe_top_delay="0" -s ooze_shield_dist="2" -s prime_tower_min_volume="6" -s machine_disallowed_areas="[]" -s jerk_support_interface="20" -s infill_extruder_nr="-1" -s infill_sparse_density="20" -s wireframe_roof_inset="3" -s jerk_print_layer_0="20" -s material_anti_ooze_retracted_position="-4" -s support_roof_material_flow="100" -s alternate_carve_order="True" -s support_bottom_extruder_nr="0" -s support_xy_distance_overhang="0.2" -s speed_equalize_flow_max="150" -s layer_height="0.1" -s infill_mesh="False" -s material_break_preparation_retracted_position="-16" -s jerk_topbottom="20" -s remove_empty_first_layers="True" -s acceleration_wall="3000" -s support_bottom_material_flow="100" -s acceleration_travel="5000" -s ironing_enabled="False" -s skin_no_small_gaps_heuristic="False" -s support_infill_sparse_thickness="0.1" -s material_bed_temperature_layer_0="66" -s machine_steps_per_mm_e="1600" -s support_bottom_distance="0" -s wall_thickness="0.8" -s material_crystallinity="False" -s cool_min_layer_time="5" -s material_linear_advance_factor="0" -s support_infill_angles="[ ]" -s shell="0" -s support_roof_pattern="concentric" -s support_mesh="False" -s support_material_flow="100" -s bridge_fan_speed="100" -s acceleration_roofing="3000" -s retraction_hop_enabled="False" -s switch_extruder_retraction_speed="20" -s small_feature_speed_factor="50" -s gradual_support_infill_steps="0" -s bridge_skin_density_3="80" -s support_interface_enable="False" -s retraction_speed="25" -s bridge_skin_speed="15.0" -s skirt_brim_material_flow="100" -s raft_base_jerk="20" -s time="18:40:51" -s machine_buildplate_type="glass" -s z_seam_y="190" -s machine_feeder_wheel_diameter="10.0" -s retraction_hop_only_when_collides="False" -s infill_support_angle="40" -s support_brim_width="8.0" -s cool_fan_speed_min="100.0" -s wipe_move_distance="20" -s bridge_fan_speed_3="0" -s wireframe_roof_outer_delay="0.2" -s ironing_inset="0.2" -s support_tree_branch_diameter_angle="5" -s speed_slowdown_layers="2" -s default_material_print_temperature="210" -s roofing_layer_count="0" -s bridge_skin_density_2="75" -s retraction_amount="6.5" -s wipe_retraction_speed="25" -s material_final_print_temperature="195" -s bridge_wall_material_flow="50" -s gantry_height="180" -s material_surface_energy="100" -s raft_interface_line_width="0.8" -s infill_offset_x="0" -s speed_equalize_flow_enabled="False" -s adaptive_layer_height_threshold="0.2" -s raft_interface_line_spacing="1.0" -s material_flush_purge_length="60" -s machine_nozzle_heat_up_speed="2.0" -s raft_surface_fan_speed="0" -s machine_max_feedrate_e="299792458000" -s spaghetti_infill_stepped="True" -s support_xy_distance="0.7" -s speed_wall="30.0" -s sub_div_rad_add="0.4" -s bottom_skin_preshrink="0.8" -s machine_steps_per_mm_y="50" -s wireframe_printspeed="5" -s support_tree_branch_diameter="2" -s jerk_support_infill="20" -s wall_overhang_speed_factor="100" -s adhesion_extruder_nr="0" -s mold_width="5" -s machine_acceleration="4000" -s support_bottom_stair_step_width="5.0" -s travel_compensate_overlapping_walls_x_enabled="True" -s cool_fan_speed_0="0" -s blackmagic="0" -s infill_support_enabled="False" -s support_brim_line_count="20" -s support_roof_height="1.2" -s center_object="False" -s skirt_brim_line_width="0.4" -s top_bottom_pattern="lines" -s print_sequence="all_at_once" -s skin_overlap="5" -s wireframe_nozzle_clearance="1" -s speed_infill="60" -s wipe_retraction_extra_prime_amount="0" -s retraction_combing_max_distance="0" -s z_seam_x="100.0" -s draft_shield_height="10" -s wireframe_height="3" -s z_seam_relative="False" -s cross_support_density_image="" -s top_bottom_thickness="0.8" -s skirt_brim_speed="30.0" -s switch_extruder_retraction_amount="16" -s material_maximum_park_duration="300" -s machine_nozzle_temp_enabled="True" -s raft_base_speed="22.5" -s support_angle="70" -s jerk_ironing="20" -s expand_skins_expand_distance="0.8" -s roofing_line_width="0.4" -s machine_shape="rectangular" -s conical_overhang_enabled="False" -s speed_travel_layer_0="60.0" -s wireframe_printspeed_bottom="5" -s machine_minimum_feedrate="0.0" -s line_width="0.4" -s optimize_wall_printing_order="False" -s raft_surface_speed="30.0" -s machine_height="180" -s travel_retract_before_outer_wall="False" -s prime_blob_enable="False" -s meshfix_keep_open_polygons="False" -s wireframe_straight_before_down="20" -s z_seam_corner="z_seam_corner_inner" -s machine_head_with_fans_polygon="[[-20, 10], [10, 10], [10, -10], [-20, -10]]" -s ironing_only_highest_layer="False" -s acceleration_wall_x="3000" -s carve_multiple_volumes="False" -s flow_rate_extrusion_offset_factor="100" -s wireframe_printspeed_up="5" -s resolution="0" -s raft_surface_thickness="0.1" -s acceleration_travel_layer_0="5000.0" -s wipe_brush_pos_x="100" -s machine_nozzle_id="unknown" -s material_linear_advance_factor_wall="0" -s coasting_min_volume="0.8" -s cool_fan_speed="100.0" -s support_zag_skip_count="0" -s fill_outline_gaps="False" -s machine_filament_park_distance="16" -s wireframe_flow_flat="100" -s speed_print_layer_0="30.0" -s support="0" -s infill_mesh_order="0" -s spaghetti_infill_enabled="False" -s acceleration_support="3000" -s acceleration_support_roof="3000" -s support_roof_offset="0.0" -s material_extrusion_cool_down_speed="0.7" -s support_tree_branch_distance="1" -s meshfix_maximum_resolution="0.5" -s wipe_repeat_count="5" -s material_standby_temperature="150" -s brim_outside_only="True" -s machine_heated_build_volume="False" -s support_conical_angle="30" -s support_brim_enable="False" -s cool_fan_full_at_height="0.3" -s support_xy_overrides_z="z_overrides_xy" -s min_infill_area="0" -s machine_nozzle_tip_outer_diameter="1" -s support_pattern="lines" -s brim_replaces_support="True" -s adhesion_z_offset_extensive_processing="False" -s skirt_gap="3" -s support_tower_roof_angle="65" -s extruder_prime_pos_z="0" -s retraction_hop_after_extruder_switch_height="1" -s acceleration_prime_tower="3000" -s material_print_temp_prepend="True" -s wireframe_printspeed_down="5" -s wireframe_flow_connection="100" -s acceleration_skirt_brim="3000" -s meshfix="0" -s top_thickness="0.8" -s acceleration_enabled="False" -s support_roof_extruder_nr="0" -s support_roof_angles="[ ]" -s material_print_temp_wait="True" -s support_top_distance="0.1" -s retraction_hop_after_extruder_switch="True" -s support_roof_line_width="0.4" -s brim_gap="0" -s acceleration_support_infill="3000" -s bridge_sparse_infill_max_density="0" -s bridge_skin_speed_3="15.0" -s spaghetti_flow="20" -s magic_fuzzy_skin_point_dist="0.8" -s filter_out_tiny_gaps="True" -s jerk_print="20" -s minimum_roof_area="1.0" -s mesh_position_y="0" -s infill_randomize_start_location="False" -s fill_perimeter_gaps="everywhere" -s prime_tower_wipe_enabled="True" -s retraction_hop="1" -s jerk_wall_0="20" -s machine_name="Wanhao Duplicator i3 Plus" -s support_supported_skin_fan_speed="100" -s infill_wall_line_count="0" -s connect_infill_polygons="False" -s retraction_extrusion_window="6.5" -s support_fan_enable="False" -s machine_show_variants="False" -s skin_line_width="0.4" -s acceleration_infill="3000" -s travel_avoid_supports="False" -s ironing_pattern="zigzag" -s speed_travel="120" -s layer_0_z_overlap="0.15" -s machine_max_acceleration_y="9000" -s support_tree_enable="True" -s support_interface_offset="0.0" -s retraction_count_max="90" -s infill_offset_y="0" -s brim_line_count="8" -s support_roof_line_distance="0.4" -s prime_tower_line_width="0.4" -s anti_overhang_mesh="False" -s infill_material_flow="100" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s adhesion_type="skirt" -s material_linear_advance_factor_topbottom="0" -s wireframe_enabled="False" -s jerk_support_roof="20" -s machine_extruder_count="1" -s xy_offset_layer_0="0" -s adaptive_layer_height_enabled="False" -s spaghetti_infill_extra_volume="0" -s support_connect_zigzags="True" -s jerk_travel="30" -s layer_height_0="0.3" -s material_linear_advance_factor_skirt_brim="0" -s machine_nozzle_cool_down_speed="2.0" -s raft_airgap="0.3" -s material_flush_purge_speed="0.5" -s wireframe_strategy="compensate" -s machine_gcode_flavor="RepRap (Marlin/Sprinter)" -s wireframe_roof_fall_down="2" -s raft_acceleration="3000" -s small_hole_max_size="0" -s support_z_distance="0.1" -s meshfix_union_all="True" -s material="0" -s material_bed_temp_prepend="True" -s infill_before_walls="True" -s bridge_enable_more_layers="True" -s raft_base_acceleration="3000" -s wall_extruder_nr="-1" -s wireframe_drag_along="0.6" -s machine_nozzle_expansion_angle="45" -s machine_steps_per_mm_x="50" -s experimental="0" -s prime_tower_position_x="195.6" -s bridge_wall_min_length="5" -s wall_min_flow_retract="False" -s extruder_prime_pos_y="0" -s skin_material_flow="100" -s support_bottom_density="100" -s wall_0_material_flow="100" -s jerk_support="20" -s wall_line_width_x="0.4" -s roofing_extruder_nr="-1" -s raft_margin="15" -s machine_max_jerk_e="5.0" -s small_feature_max_length="0.0" -s skin_overlap_mm="0.02" -s support_interface_angles="[ ]" -s bottom_thickness="0.8" -s retraction_prime_speed="25" -s z_seam_type="sharpest_corner" -s material_linear_advance_factor_prime_tower="0" -s print_bed_temperature="66" -s support_bottom_enable="False" -s dual="0" -s support_roof_density="100" -s spaghetti_max_height="2.0" -s machine_max_feedrate_z="299792458000" -s support_infill_rate="0" -s travel_compensate_overlapping_walls_enabled="True" -s magic_fuzzy_skin_point_density="1.25" -s wireframe_bottom_delay="0" -s support_conical_enabled="False" -s material_anti_ooze_retraction_speed="5" -s support_interface_material_flow="100" -s infill_overlap="10" -s support_bottom_stair_step_height="0.3" -s adhesion_z_offset="0" -s bridge_wall_coast="100" -s skin_edge_support_layers="0" -s support_type="buildplate" -s bridge_skin_density="100" -s raft_base_fan_speed="0" -s support_tree_collision_resolution="0.2" -s support_initial_layer_line_distance="0" -s gradual_support_infill_step_height="1" -s bridge_wall_speed="15.0" -s support_bottom_offset="0.0" -s minimum_bottom_area="1.0" -s infill_line_distance="4.0" -s raft_interface_speed="22.5" -s travel_avoid_distance="0.625" -s speed_prime_tower="60" -s extruder_prime_pos_abs="False" -s material_adhesion_tendency="10" -s infill_sparse_thickness="0.1" -s jerk_roofing="20" -s gradual_infill_step_height="1.5" -s machine_max_acceleration_x="9000" -s bridge_skin_material_flow_2="100" -s bridge_skin_material_flow="60" -s material_print_temperature="210" -s retraction_enable="True" -s support_line_distance="0" -s draft_shield_enabled="False" -s wall_0_extruder_nr="-1" -s raft_interface_thickness="0.15000000000000002" -s xy_offset="0" -s jerk_prime_tower="20" -s skin_outline_count="1" -s support_bottom_line_width="0.4" -s retraction_extra_prime_amount="0" -s jerk_wall_x="20" -s small_feature_speed_factor_0="50" -s support_extruder_nr="0" -s meshfix_extensive_stitching="False" -s magic_fuzzy_skin_thickness="0.3" -s material_break_retracted_position="-50" -s material_initial_print_temperature="200" -s roofing_pattern="lines" -e0 -s acceleration_layer_0="3000" -s raft_surface_line_spacing="0.4" -s jerk_travel_layer_0="30.0" -s minimum_interface_area="1.0" -s machine_nozzle_offset_y="0" -s coasting_speed="90" -s switch_extruder_extra_prime_amount="0" -s roofing_material_flow="100" -s wall_line_width="0.4" -s material_break_preparation_temperature="220" -s slicing_tolerance="exclusive" -s machine_extruder_end_pos_y="0" -s support_bottom_density="100" -s skin_material_flow="100" -s top_skin_expand_distance="2.4" -s material_linear_advance_factor_support_interface="0" -s retract_at_layer_change="False" -s machine_extruder_start_pos_abs="False" -s material_linear_advance_factor_topbottom="0" -s outer_inset_first="False" -s cross_infill_density_image="" -s retraction_min_travel="0.8" -s support_interface_skip_height="0.3" -s bridge_skin_speed_2="10" -s speed_support_roof="20.0" -s platform_adhesion="0" -s raft_base_thickness="0.36" -s meshfix_union_all_remove_holes="False" -s skirt_line_count="4" -s infill_angles="[ ]" -s jerk_layer_0="20" -s support_roof_pattern="concentric" -s speed_print="30" -s material_guid="0ff92885-617b-4144-a03c-9989872454bc" -s roofing_pattern="lines" -s support_conical_min_width="5.0" -s raft_jerk="20" -s support_tower_maximum_supported_diameter="3.0" -s acceleration_wall_0="3000" -s speed_roofing="15.0" -s speed_wall_x="30.0" -s magic_mesh_surface_mode="normal" -s top_skin_preshrink="2.4" -s wipe_hop_amount="1" -s support_join_distance="2.0" -s gradual_infill_steps="0" -s mold_enabled="False" -s support_use_towers="True" -s minimum_support_area="0.0" -s limit_support_retractions="True" -s support_bottom_line_distance="0.4" -s machine_nozzle_offset_x="0" -s cool_fan_speed_max="80" -s cool_fan_enabled="True" -s wall_overhang_angle="90" -s support_line_distance="0" -s retraction_enable="True" -s jerk_wall_0="20" -s retraction_hop="1" -s max_skin_angle_for_expansion="90" -s ironing_line_spacing="0.1" -s material_flow="100" -s support_offset="0" -s infill_overlap="14" -s support_interface_material_flow="100" -s extruder_nr="0" -s retraction_hop_enabled="False" -s switch_extruder_retraction_speed="20" -s acceleration_roofing="3000" -s raft_surface_acceleration="3000" -s mesh_position_z="0" -s conical_overhang_angle="50" -s infill_overlap_mm="0.05600000000000001" -s clean_between_layers="False" -s skin_preshrink="2.4" -s wipe_hop_speed="10" -s material_flush_purge_length="60" -s machine_nozzle_heat_up_speed="2.0" -s raft_interface_line_spacing="1.0" -s mold_roof_height="0.5" -s acceleration_ironing="3000" -s prime_tower_flow="100" -s ironing_flow="10.0" -s wall_min_flow="0" -s raft_surface_layers="2" -s skirt_brim_minimal_length="250" -s material_adhesion_tendency="0" -s extruder_prime_pos_abs="False" -s support_line_width="0.4" -s experimental="0" -s speed_ironing="10.0" -s support_interface_height="1" -s command_line_settings="0" -s material_linear_advance_factor_support="0" -s acceleration_wall_x="3000" -s bridge_skin_support_threshold="50" -s retraction_prime_speed="40" -s material_linear_advance_factor_prime_tower="0" -s z_seam_type="sharpest_corner" -s support_interface_line_width="0.4" -s support_bottom_angles="[ ]" -s support_skip_zag_per_mm="20" -s bottom_skin_expand_distance="2.4" -s support_connect_zigzags="True" -s spaghetti_infill_extra_volume="0" -s connect_skin_polygons="False" -s infill_pattern="gyroid" -s raft_base_jerk="20" -s jerk_infill="20" -s machine_steps_per_mm_x="50" -s coasting_enable="False" -s support_interface_density="100" -s retraction_hop_after_extruder_switch="True" -s support_top_distance="0.1" -s jerk_support="20" -s wall_line_width_x="0.4" -s bridge_skin_material_flow_3="110" -s support_interface_pattern="concentric" -s bridge_fan_speed_2="0" -s initial_bottom_layers="6" -s wipe_retraction_retract_speed="40" -s multiple_mesh_overlap="0.15" -s material_linear_advance_factor_infill="0" -s magic_fuzzy_skin_enabled="False" -s wipe_hop_enable="False" -s zig_zaggify_support="False" -s wipe_pause="0" -s wipe_retraction_prime_speed="40" -s jerk_support_bottom="20" -s material_no_load_move_factor="0.940860215" -s material_flow_layer_0="100" -s wall_material_flow="100" -s raft_speed="15.0" -s mold_angle="40" -s machine_settings="0" -s acceleration_topbottom="3000" -s z_seam_position="back" -s cooling="0" -s cool_min_layer_time_fan_speed_max="10" -s support_roof_material_flow="100" -s support_tree_angle="40" -s cross_infill_pocket_size="0.625" -s wall_line_width_0="0.4" -s material_break_speed="25" -s speed_wall_0="15.0" -s cool_lift_head="False" -s connect_infill_polygons="False" -s machine_extruder_start_code="" -s machine_min_cool_heat_time_window="50.0" -s layer_start_x="0.0" -s support_wall_count="1" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s skin_edge_support_thickness="0" -s switch_extruder_prime_speed="20" -s extruder_prime_pos_x="0" -s layer_start_y="0.0" -s infill_wipe_dist="0.1" -s cool_min_speed="10" -s travel="0" -s initial_layer_line_width_factor="100.0" -s magic_fuzzy_skin_outside_only="False" -s infill_line_width="0.4" -s acceleration_support_interface="3000" -s spaghetti_max_infill_angle="10" -s material_end_of_filament_purge_speed="0.5" -s raft_margin="15" -s machine_endstop_positive_direction_z="True" -s coasting_volume="0.064" -s speed="0" -s material_diameter="1.75" -s speed_z_hop="10" -s raft_interface_jerk="20" -s material_shrinkage_percentage="0" -s machine_nozzle_size="0.4" -s top_layers="6" -s infill_multiplier="1" -s spaghetti_inset="0.2" -s alternate_extra_perimeter="False" -s support_roof_enable="True" -s top_bottom_pattern_0="lines" -s meshfix_maximum_travel_resolution="0.8" -s dual="0" -s support_bottom_enable="False" -s jerk_wall="20" -s travel_avoid_other_parts="True" -s acceleration_print_layer_0="3000" -s support_bottom_pattern="concentric" -s material_linear_advance_factor_wall_x="0" -s acceleration_print="3000" -s material_break_temperature="50" -s wipe_retraction_amount="2.5" -s material_initial_print_temperature="210" -s material_break_retracted_position="-50" -s machine_heat_zone_length="16" -s jerk_skirt_brim="20" -s bottom_layers="6" -s material_flow_dependent_temperature="False" -s switch_extruder_retraction_speeds="20" -s travel_compensate_overlapping_walls_0_enabled="True" -s skin_angles="[ ]" -s machine_steps_per_mm_z="50" -s speed_topbottom="15.0" -s raft_smoothing="5" -s support_skip_some_zags="False" -s wall_x_material_flow="100" -s min_skin_width_for_expansion="3.67394039744206e-17" -s machine_extruder_end_pos_x="0" -s prime_tower_min_volume="6" -s jerk_support_interface="20" -s infill_sparse_density="64" -s jerk_print_layer_0="20" -s material_anti_ooze_retracted_position="-4" -s infill_enable_travel_optimization="False" -s speed_layer_0="12" -s raft_surface_speed="15.0" -s support_supported_skin_fan_speed="100" -s infill_wall_line_count="0" -s support_xy_distance_overhang="0.2" -s speed_equalize_flow_max="150" -s material_break_preparation_retracted_position="-16" -s raft_surface_line_width="0.4" -s acceleration_wall="3000" -s support_bottom_material_flow="100" -s acceleration_travel="5000" -s ironing_enabled="False" -s support_bottom_stair_step_height="0.3" -s brim_outside_only="True" -s material_standby_temperature="175" -s machine_steps_per_mm_e="1600" -s support_bottom_distance="0" -s wall_thickness="0.8" -s material_crystallinity="False" -s support_initial_layer_line_distance="0" -s meshfix_union_all="True" -s support_z_distance="0.1" -s retraction_hop_only_when_collides="False" -s machine_feeder_wheel_diameter="10.0" -s speed_travel="150" -s layer_0_z_overlap="0.15" -s support_angle="70" -s raft_base_speed="11.25" -s ironing_pattern="zigzag" -s brim_gap="0" -s acceleration_support_infill="3000" -s support_roof_line_width="0.4" -s gradual_support_infill_steps="0" -s bridge_skin_density_3="80" -s support_interface_enable="False" -s brim_width="8.0" -s speed_support_infill="30" -s raft_base_line_spacing="1.6" -s max_extrusion_before_wipe="10" -s wall_0_inset="0" -s material="0" -s infill_before_walls="True" -s small_hole_max_size="0" -s raft_surface_jerk="20" -s infill_support_angle="40" -s cool_fan_speed_min="80" -s wipe_move_distance="20" -s bridge_fan_speed_3="0" -s ironing_inset="0.2" -s support_roof_density="100" -s spaghetti_max_height="2.0" -s retraction_retract_speed="40" -s zig_zaggify_infill="False" -s meshfix_maximum_resolution="0.5" -s wipe_repeat_count="5" -s support_tree_branch_distance="1" -s top_bottom_thickness="0.8" -s skirt_brim_speed="12" -s switch_extruder_retraction_amount="16" -s material_maximum_park_duration="300" -s machine_nozzle_temp_enabled="True" -s machine_endstop_positive_direction_x="False" -s material_final_print_temperature="205" -s retraction_extrusion_window="2.5" -s support_fan_enable="False" -s machine_extruder_start_pos_y="0" -s material_surface_energy="100" -s raft_interface_line_width="0.8" -s infill_offset_x="0" -s z_seam_x="100.0" -s retraction_combing_max_distance="0" -s speed_equalize_flow_enabled="False" -s machine_extruder_start_pos_x="0" -s support_tower_diameter="3.0" -s bridge_skin_density_2="75" -s retraction_amount="2.5" -s wipe_retraction_speed="40" -s raft_interface_acceleration="3000" -s raft_surface_fan_speed="0" -s spaghetti_infill_stepped="True" -s support_xy_distance="0.7" -s speed_wall="15.0" -s sub_div_rad_add="0.4" -s bottom_skin_preshrink="2.4" -s small_feature_speed_factor_0="50" -s jerk_support_infill="20" -s wall_overhang_speed_factor="100" -s mold_width="5" -s material_linear_advance_factor_wall_0="0" -s wall_0_wipe_dist="0.2" -s support_bottom_stair_step_width="5.0" -s bridge_fan_speed="100" -s support_material_flow="100" -s raft_base_acceleration="3000" -s wipe_retraction_enable="True" -s material_linear_advance_factor="0" -s cool_min_layer_time="5" -s support_infill_sparse_thickness="0.1" -s support_roof_height="1.2" -s cool_fan_full_layer="2" -s center_object="False" -s skirt_brim_line_width="0.4" -s top_bottom_pattern="lines" -s skin_overlap="5" -s speed_infill="30" -s wipe_retraction_extra_prime_amount="0" -s z_seam_relative="False" -s cross_support_density_image="" -s roofing_angles="[ ]" -s jerk_ironing="20" -s infill_sparse_thickness="0.1" -s brim_line_count="8" -s support_roof_line_distance="0.4" -s prime_tower_line_width="0.4" -s mesh_position_x="0" -s expand_skins_expand_distance="2.4" -s small_feature_speed_factor="50" -s roofing_line_width="0.4" -s conical_overhang_enabled="False" -s speed_travel_layer_0="60.0" -s line_width="0.4" -s optimize_wall_printing_order="False" -s prime_blob_enable="False" -s meshfix_keep_open_polygons="False" -s meshfix_extensive_stitching="False" -s magic_fuzzy_skin_thickness="0.3" -s resolution="0" -s raft_surface_thickness="0.1" -s acceleration_travel_layer_0="5000.0" -s wipe_brush_pos_x="100" -s machine_nozzle_id="unknown" -s material_linear_advance_factor_wall="0" -s coasting_min_volume="0.8" -s cool_fan_speed="80" -s support_bottom_line_width="0.4" -s support_zag_skip_count="0" -s fill_outline_gaps="False" -s machine_filament_park_distance="16" -s speed_print_layer_0="12" -s support="0" -s spaghetti_infill_enabled="False" -s retraction_hop_after_extruder_switch_height="1" -s machine_extruder_end_pos_abs="False" -s acceleration_support="3000" -s acceleration_support_roof="3000" -s support_roof_offset="0.0" -s skin_no_small_gaps_heuristic="False" -s fill_perimeter_gaps="everywhere" -s prime_tower_wipe_enabled="True" -s speed_support="30" -s material_end_of_filament_purge_length="20" -s material_break_preparation_speed="2" -s acceleration_support_bottom="3000" -s extruder_prime_pos_y="0" -s wall_min_flow_retract="False" -s retraction_count_max="90" -s support_xy_overrides_z="z_overrides_xy" -s machine_nozzle_tip_outer_diameter="1" -s min_infill_area="0" -s infill_offset_y="0" -s ironing_only_highest_layer="False" -s small_feature_max_length="0.0" -s skin_overlap_mm="0.02" -s support_interface_angles="[ ]" -s bottom_thickness="0.8" -s bridge_sparse_infill_max_density="0" -s support_pattern="lines" -s bridge_skin_speed_3="10" -s spaghetti_flow="20" -s magic_fuzzy_skin_point_dist="0.8" -s filter_out_tiny_gaps="True" -s jerk_print="20" -s skin_edge_support_layers="0" -s meshfix_maximum_deviation="0.05" -s machine_extruder_end_code="" -s skin_line_width="0.4" -s skirt_gap="3" -s acceleration_prime_tower="3000" -s support_tower_roof_angle="65" -s extruder_prime_pos_z="0" -s xy_offset_layer_0="0" -s acceleration_infill="3000" -s travel_avoid_supports="False" -s support_interface_offset="0.0" -s meshfix="0" -s acceleration_skirt_brim="3000" -s speed_support_bottom="20.0" -s material_extrusion_cool_down_speed="0.7" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s machine_nozzle_head_distance="3" -s support_brim_width="8.0" -s mesh_position_y="0" -s infill_randomize_start_location="False" -s bridge_skin_speed="10" -s skirt_brim_material_flow="100" -s infill_material_flow="100" -s shell="0" -s support_infill_angles="[ ]" -s cool_fan_speed_0="0" -s blackmagic="0" -s support_brim_line_count="20" -s infill_support_enabled="False" -s top_thickness="0.8" -s jerk_travel="30" -s material_linear_advance_factor_skirt_brim="0" -s machine_nozzle_cool_down_speed="2.0" -s raft_airgap="0.3" -s material_flush_purge_speed="0.5" -s support_bottom_height="1" -s raft_acceleration="3000" -s bridge_enable_more_layers="True" -s infill="0" -s speed_prime_tower="30" -s raft_base_line_width="0.8" -s bridge_skin_density="100" -s support_tree_branch_diameter_angle="5" -s raft_base_fan_speed="0" -s support_tree_collision_resolution="0.2" -s travel_compensate_overlapping_walls_x_enabled="True" -s machine_extruder_cooling_fan_number="0" -s minimum_roof_area="1.0" -s bridge_wall_material_flow="50" -s travel_avoid_distance="0.625" -s raft_interface_speed="11.25" -s bridge_skin_material_flow="60" -s material_print_temperature="220" -s support_infill_rate="0" -s travel_compensate_overlapping_walls_enabled="True" -s wall_line_count="6" -s magic_fuzzy_skin_point_density="1.25" -s support_roof_angles="[ ]" -s machine_steps_per_mm_y="50" -s support_tree_branch_diameter="2" -s default_material_print_temperature="200" -s roofing_layer_count="0" -s z_seam_corner="z_seam_corner_inner" -s support_conical_enabled="False" -s material_anti_ooze_retraction_speed="5" -s retraction_extra_prime_amount="0" -s jerk_topbottom="20" -s raft_interface_fan_speed="0" -s bridge_wall_coast="100" -s retraction_speed="40" -s wall_0_material_flow="100" -s support_conical_angle="30" -s support_brim_enable="False" -s cool_fan_full_at_height="0.3" -s gradual_support_infill_step_height="1" -s bridge_wall_speed="10" -s support_bottom_offset="0.0" -s infill_line_distance="0.625" -s minimum_bottom_area="1.0" -s jerk_roofing="20" -s gradual_infill_step_height="1.5" -s material_print_temperature_layer_0="220" -s speed_support_interface="20.0" -s bridge_skin_material_flow_2="100" -s raft_interface_thickness="0.15000000000000002" -s xy_offset="0" -s jerk_prime_tower="20" -s skin_outline_count="1" -s jerk_wall_x="20" -s brim_replaces_support="True" -s z_seam_y="190" -s raft_fan_speed="0" -s jerk_support_roof="20" -s machine_endstop_positive_direction_y="False" -g -e0 -l "0" -s extruder_nr="0"
2020-03-11 18:40:57,732 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-03-11 18:41:01,708 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-11 18:41:01,713 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/Resources/qml/UM/Dialog.qml:86:13: QML Loader: Binding loop detected for property "active"
2020-03-11 18:41:01,715 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/DiscoverOctoPrintAction.qml:595: TypeError: Cannot call method 'getId' of undefined
2020-03-11 18:41:02,258 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/DiscoverOctoPrintAction.qml:377: TypeError: Cannot call method 'getId' of undefined
2020-03-11 18:41:04,091 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 217 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-11 18:41:04,340 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-11 18:41:04,343 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-11 18:41:04,368 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [663]: Slicing took 12.74867296218872 seconds
2020-03-11 18:41:04,368 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [664]: Number of models per buildplate: {0: 1}
2020-03-11 18:41:04,368 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [678]: See if there is more to slice...
2020-03-11 18:41:04,585 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [181]: Socket state changed to Closing
2020-03-11 18:41:04,590 - DEBUG - [MainThread] UM.Backend.Backend._onSocketError [203]: Socket debug: Arcus Error (13): Closing socket because other side requested close.
2020-03-11 18:41:04,593 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [183]: Socket state changed to Closed
2020-03-11 18:41:04,593 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onBackendQuit [829]: Backend quit with return code 0. Resetting process and socket.
2020-03-11 18:41:28,401 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-11 18:41:28,407 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/DiscoverOctoPrintAction.qml:595: TypeError: Cannot call method 'getId' of undefined
2020-03-11 18:41:28,945 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/DiscoverOctoPrintAction.qml:377: TypeError: Cannot call method 'getId' of undefined
2020-03-11 18:41:38,740 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-03-11 18:41:45,795 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [263]: Trying to access OctoPrint instance at http://octolinux:5001/ with the provided API key.
2020-03-11 18:41:45,867 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [506]: API key accepted by OctoPrint.
2020-03-11 18:41:47,494 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-11 18:41:47,507 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [310]: Connection with instance BlackLeader with url http://octolinux:5001/ started
2020-03-11 18:41:47,511 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-11 18:41:47,512 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [310]: Connection with instance BlackLeader with url http://octolinux:5001/ started
2020-03-11 18:41:47,556 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device BlackLeader already added
2020-03-11 18:41:47,560 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device BlackLeader already added
2020-03-11 18:41:47,603 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [813]: Unusable stream url received:  http://octolinux:8080/?action=stream
2020-03-11 18:41:47,604 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [816]: Set OctoPrint camera url to 
2020-03-11 18:41:57,738 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-03-11 18:42:04,005 - DEBUG - [MainThread] LinearAdvanceSettingPlugin.LinearAdvanceSettingPlugin._filterGcode [109]: No used extruders specify a linear advance factor
2020-03-11 18:42:04,226 - DEBUG - [MainThread] UM.Controller.setActiveStage [149]: Setting active stage to MonitorStage
2020-03-11 18:42:04,240 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/SidebarGUIPlugin/SidebarGUIPlugin/resources/qml/MonitorStageMenu.qml:23: TypeError: Cannot read property 'children' of undefined
2020-03-11 18:42:04,278 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:211: Error: Cannot assign [undefined] to QString
2020-03-11 18:42:04,346 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._processRequest [308]: Request [d8352ecc5c6744dcb311f4c536939bc9] started
2020-03-11 18:42:04,349 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-11 18:42:04,734 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestFinished [369]: Request [d8352ecc5c6744dcb311f4c536939bc9] finished.
2020-03-11 18:42:04,737 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-11 18:42:04,739 - INFO - [MainThread] SliceInfoPlugin.SliceInfo._onRequestFinished [275]: SliceInfo sent successfully
2020-03-11 18:42:13,558 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-03-11 18:42:16,347 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onUploadFinished [1012]: Resource created on OctoPrint instance: http://octolinux:5001/api/files/local/WDI3P_motor_holder_1p0.gcode
2020-03-11 18:42:17,750 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [886]: Still waiting for PrintTimeGenius analysis of files/local/WDI3P_motor_holder_1p0.gcode
2020-03-11 18:42:19,778 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [874]: PrintTimeGenius analysis of files/local/WDI3P_motor_holder_1p0.gcode is done
2020-03-11 18:42:19,787 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-03-11 18:42:19,791 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-03-11 18:42:19,922 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [891]: OctoPrint file command accepted
2020-03-11 22:01:16,660 - DEBUG - [MainThread] UM.Controller.setActiveStage [149]: Setting active stage to PrepareStage
2020-03-11 22:01:16,729 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-11 22:01:16,739 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/SidebarGUIPlugin/SidebarGUIPlugin/resources/qml/SidebarFooter.qml:45: TypeError: Type error
2020-03-11 22:01:16,876 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-11 22:01:16,880 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-11 22:01:17,009 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/SidebarGUIPlugin/SidebarGUIPlugin/resources/qml/ProfileSelector44.qml:38:5: QML Button: Binding loop detected for property "implicitWidth"
2020-03-11 22:01:17,030 - DEBUG - [MainThread] cura.CuraApplication.log [1636]: SidebarGUIPlugin patching interface for Cura 4.5 and newer
2020-03-11 22:01:17,034 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-11 22:01:17,037 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-11 22:01:17,082 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:79: ReferenceError: stop is not defined
2020-03-11 22:01:17,086 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:63: TypeError: Cannot read property of null
2020-03-11 22:01:17,092 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:91: TypeError: Cannot read property of null
2020-03-11 22:01:17,098 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:102: TypeError: Cannot read property of null
2020-03-11 22:01:17,104 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:103: TypeError: Cannot read property of null
2020-03-11 22:01:17,108 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:139: TypeError: Cannot read property of null
2020-03-11 22:01:17,112 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:140: TypeError: Cannot read property of null
2020-03-11 22:01:17,116 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:120: TypeError: Cannot read property of null
2020-03-11 22:01:17,119 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:122: TypeError: Cannot read property of null
2020-03-11 22:01:17,122 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-03-11 22:01:17,125 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:36: TypeError: Cannot read property of null
2020-03-11 22:01:17,129 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:37: TypeError: Cannot read property of null
2020-03-11 22:01:17,132 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:49: TypeError: Cannot read property of null
2020-03-11 22:01:17,134 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:59: TypeError: Cannot read property of null
2020-03-11 22:01:17,137 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:61: TypeError: Cannot read property of null
2020-03-11 22:01:17,139 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:63: TypeError: Cannot read property of null
2020-03-11 22:01:17,142 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ExtruderBox.qml:20: TypeError: Cannot read property of null
2020-03-11 22:01:17,145 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:29: TypeError: Cannot read property of null
2020-03-11 22:01:17,148 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:30: TypeError: Cannot read property of null
2020-03-11 22:01:17,150 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:40: TypeError: Cannot read property of null
2020-03-11 22:01:17,152 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:73: TypeError: Cannot read property of null
2020-03-11 22:01:17,155 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:135: TypeError: Cannot read property of null
2020-03-11 22:01:17,157 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:246: TypeError: Cannot read property of null
2020-03-11 22:01:17,160 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:247: TypeError: Cannot read property of null
2020-03-11 22:01:17,163 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:173: TypeError: Cannot read property of null
2020-03-11 22:01:17,165 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:175: TypeError: Cannot read property of null
2020-03-11 22:01:17,167 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:190: TypeError: Cannot read property of null
2020-03-11 22:01:17,170 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:193: TypeError: Cannot read property of null
2020-03-11 22:01:17,173 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:60: TypeError: Cannot read property of null
2020-03-11 22:01:17,175 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:248: TypeError: Cannot read property of null
2020-03-11 22:01:17,178 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:294: TypeError: Cannot read property of null
2020-03-11 22:01:17,180 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:26: TypeError: Cannot read property of null
2020-03-11 22:01:17,183 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:27: TypeError: Cannot read property of null
2020-03-11 22:01:17,190 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:388: TypeError: Cannot read property of null
2020-03-11 22:01:17,192 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:390: TypeError: Cannot read property of null
2020-03-11 22:01:17,195 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:391: TypeError: Cannot read property of null
2020-03-11 22:01:17,198 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:26: TypeError: Cannot read property of null
2020-03-11 22:01:17,200 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:27: TypeError: Cannot read property of null
2020-03-11 22:01:17,203 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:24: TypeError: Cannot read property of null
2020-03-11 22:01:17,205 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:30: TypeError: Cannot read property of null
2020-03-11 22:01:17,208 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:39: TypeError: Cannot read property of null
2020-03-11 22:01:17,211 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:24: TypeError: Cannot read property of null
2020-03-11 22:01:17,214 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:30: TypeError: Cannot read property of null
2020-03-11 22:01:17,216 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:39: TypeError: Cannot read property of null
2020-03-11 22:01:17,219 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:24: TypeError: Cannot read property of null
2020-03-11 22:01:17,221 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:30: TypeError: Cannot read property of null
2020-03-11 22:01:17,223 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:39: TypeError: Cannot read property of null
2020-03-11 22:01:17,226 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupTooltip.qml:67: TypeError: Cannot read property of null
2020-03-11 22:01:17,228 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupTooltip.qml:69: TypeError: Cannot read property of null
2020-03-11 22:01:17,230 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupTooltip.qml:71: TypeError: Cannot read property of null
2020-03-11 22:01:17,233 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:150: TypeError: Cannot read property of null
2020-03-11 22:01:17,235 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-03-11 22:01:17,237 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:166: TypeError: Cannot read property of null
2020-03-11 22:01:17,240 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:167: TypeError: Cannot read property of null
2020-03-11 22:01:17,242 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:178: TypeError: Cannot read property of null
2020-03-11 22:01:17,244 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:231: TypeError: Cannot read property of null
2020-03-11 22:01:17,247 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:241: TypeError: Cannot read property of null
2020-03-11 22:01:38,526 - INFO - [MainThread] cura.UI.MachineActionManager.addDefaultMachineActions [56]: Default machine actions have been added for machine definition [wanhao_i3plus], do nothing.
2020-03-11 22:01:38,531 - WARNING - [MainThread] cura.Settings.GlobalStack.addExtruder [179]: Extruder [wanhao_i3plus_extruder_0 #5] has already been added to this stack [RedLeader]
2020-03-11 22:01:38,533 - WARNING - [MainThread] cura.Settings.ExtruderManager.registerExtruder [156]: Extruder [wanhao_i3plus_extruder_0 #5] has already been registered on machine [RedLeader], not doing anything
2020-03-11 22:01:38,537 - INFO - [MainThread] UM.Logger.info [112]: Initializing Active Machine...
2020-03-11 22:01:38,551 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-11 22:01:38,555 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-11 22:01:38,718 - WARNING - [MainThread] UM.OutputDevice.OutputDeviceManager.removeOutputDevice [179]: Could not find output device with id BlackLeader to remove
2020-03-11 22:01:38,720 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-11 22:01:38,726 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [310]: Connection with instance BlueLeader with url http://octolinux:5003/ started
2020-03-11 22:01:38,741 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/SettingsMenu.qml:51: TypeError: Cannot read property 'isEnabled' of undefined
2020-03-11 22:01:38,744 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/SettingsMenu.qml:44: TypeError: Cannot read property 'isEnabled' of undefined
2020-03-11 22:01:38,750 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/MaterialMenu.qml:26: TypeError: Cannot read property 'isEnabled' of undefined
2020-03-11 22:01:38,753 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/Menus/MaterialMenu.qml:28: TypeError: Cannot read property 'material' of undefined
2020-03-11 22:01:38,757 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-11 22:01:38,834 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-11 22:01:38,853 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-11 22:01:38,860 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-11 22:01:39,005 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device BlueLeader already added
2020-03-11 22:01:39,011 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [719]: Received an unexpected returncode: 403
2020-03-11 22:01:39,016 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x6000070963f8>
2020-03-11 22:01:39,017 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:01:39,022 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x600007096698>
2020-03-11 22:01:39,025 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:01:39,044 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x600003066468>
2020-03-11 22:01:39,047 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:01:39,367 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [135]: New error check scheduled.
2020-03-11 22:01:40,095 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [34]: Updating CustomQualityProfilesDropDownMenuModel.
2020-03-11 22:01:40,111 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [63]: Updating QualityProfilesDropDownMenuModel.
2020-03-11 22:01:40,949 - INFO - [MainThread] cura.Machines.MachineErrorChecker._setResult [187]: Error check finished, result = False, time = 1.6s
2020-03-11 22:01:42,041 - INFO - [MainThread] UM.Controller.deleteAllNodesWithMeshData [386]: Clearing scene
2020-03-11 22:01:42,046 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: GroupedOp.(#=1) <UM.Operations.RemoveSceneNodeOperation.RemoveSceneNodeOperation object at 0x600017aa2b58>, took 0ms
2020-03-11 22:01:42,051 - INFO - [MainThread] cura.CuraApplication._removeNodesWithLayerData [1900]: Clearing scene
2020-03-11 22:01:42,839 - WARNING - [MainThread] cura.UI.PrintInformation.setBaseName [360]: Unsupported Mime Type Database file extension 
2020-03-11 22:01:48,959 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-03-11 22:01:49,005 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [719]: Received an unexpected returncode: 403
2020-03-11 22:01:49,007 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x600007368ef8>
2020-03-11 22:01:49,007 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:01:49,017 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x600007328b78>
2020-03-11 22:01:49,017 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:01:58,993 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [719]: Received an unexpected returncode: 403
2020-03-11 22:01:58,996 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x60000707deb8>
2020-03-11 22:01:58,997 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:01:59,019 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x60000707f738>
2020-03-11 22:01:59,019 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:02:08,979 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [719]: Received an unexpected returncode: 403
2020-03-11 22:02:08,980 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x60000736ae78>
2020-03-11 22:02:08,980 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:02:08,988 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x60000732cda8>
2020-03-11 22:02:08,988 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:02:16,490 - INFO - [Thread-2] STLReader.STLReader.load_file [51]: Using NumPy-STL to load STL data.
2020-03-11 22:02:16,528 - DEBUG - [Thread-2] UM.Mesh.MeshData.calculateNormalsFromVertices [495]: Calculating normals took 0.0008671283721923828 seconds
2020-03-11 22:02:16,529 - DEBUG - [Thread-2] STLReader.STLReader._read [102]: Loaded a mesh with 32220 vertices
2020-03-11 22:02:16,562 - DEBUG - [Thread-2] UM.Mesh.MeshData.approximateConvexHull [452]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.027143001556396484 seconds. 548 input vertices. 548 output vertices.
2020-03-11 22:02:16,573 - DEBUG - [Thread-2] UM.FileHandler.ReadFileJob.run [71]: Loading file took 0.1 seconds
2020-03-11 22:02:16,603 - DEBUG - [Thread-2] UM.Mesh.MeshData.approximateConvexHull [452]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.023885011672973633 seconds. 548 input vertices. 548 output vertices.
2020-03-11 22:02:16,663 - DEBUG - [MainThread] UM.Operations.OperationStack.push [67]: <UM.Operations.AddSceneNodeOperation.AddSceneNodeOperation object at 0x600017a58318>, took 25ms
2020-03-11 22:02:18,979 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [719]: Received an unexpected returncode: 403
2020-03-11 22:02:18,981 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x600007359668>
2020-03-11 22:02:18,981 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:02:18,996 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x600007345f28>
2020-03-11 22:02:18,996 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:02:26,962 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-03-11 22:02:28,971 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [719]: Received an unexpected returncode: 403
2020-03-11 22:02:28,973 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x60000705b6c8>
2020-03-11 22:02:28,973 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:02:28,983 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x60000705abd8>
2020-03-11 22:02:28,983 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:02:33,831 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.disconnect [331]: Connection with instance BlueLeader with url http://octolinux:5003/ stopped
2020-03-11 22:02:33,844 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-11 22:02:33,848 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device BlueLeader already added
2020-03-11 22:02:33,849 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [310]: Connection with instance BlueLeader with url http://octolinux:5003/ started
2020-03-11 22:02:33,855 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-11 22:02:33,862 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/Resources/qml/UM/Dialog.qml:86:13: QML Loader: Binding loop detected for property "active"
2020-03-11 22:02:33,953 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device BlueLeader already added
2020-03-11 22:02:33,954 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [719]: Received an unexpected returncode: 403
2020-03-11 22:02:33,956 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x600007343a48>
2020-03-11 22:02:33,956 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:02:33,958 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x6000070145c8>
2020-03-11 22:02:33,959 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:02:33,961 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x6000070155f8>
2020-03-11 22:02:33,962 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:02:34,480 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [263]: Trying to access OctoPrint instance at http://octolinux:5003/ with the provided API key.
2020-03-11 22:02:43,966 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [719]: Received an unexpected returncode: 403
2020-03-11 22:02:43,968 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x60000705e158>
2020-03-11 22:02:43,968 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:02:43,978 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x6000070149b8>
2020-03-11 22:02:43,979 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:02:52,231 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [263]: Trying to access OctoPrint instance at http://octolinux:5003/ with the provided API key.
2020-03-11 22:02:52,307 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [506]: API key accepted by OctoPrint.
2020-03-11 22:03:00,944 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [225]: Starting to slice...
2020-03-11 22:03:00,944 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [243]: Going to slice build plate [0]!
2020-03-11 22:03:00,970 - DEBUG - [MainThread] UM.Backend.Backend._createSocket [213]: Previous socket existed. Closing that first.
2020-03-11 22:03:00,977 - WARNING - [Thread-3] UM.Decorators.deprecated_function [20]: <function GlobalStack.extruders at 0x600006aa24a8> is deprecated (since 4.4): Please use extruderList instead.
2020-03-11 22:03:01,156 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [173]: Socket state changed to Listening
2020-03-11 22:03:01,211 - INFO - [MainThread] UM.Backend.Backend.startEngine [81]: Started engine process: /Applications/Ultimaker Cura 3.app/Contents/MacOS/CuraEngine
2020-03-11 22:03:01,214 - DEBUG - [MainThread] UM.Backend.Backend._backendLog [101]: [Backend] Calling engine with: ['/Applications/Ultimaker Cura 3.app/Contents/MacOS/CuraEngine', 'connect', '127.0.0.1:49674', '']
2020-03-11 22:03:01,217 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-03-11 22:03:01,220 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [177]: Socket state changed to Connected
2020-03-11 22:03:01,222 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] Cura_SteamEngine version 4.5.0
2020-03-11 22:03:01,225 - DEBUG - [MainThread] UM.Backend.Backend._onSocketStateChanged [167]: Backend connected on port 49674
2020-03-11 22:03:01,228 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] Copyright (C) 2019 Ultimaker
2020-03-11 22:03:01,230 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-03-11 22:03:01,232 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] This program is free software: you can redistribute it and/or modify
2020-03-11 22:03:01,234 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] it under the terms of the GNU Affero General Public License as published by
2020-03-11 22:03:01,237 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] the Free Software Foundation, either version 3 of the License, or
2020-03-11 22:03:01,239 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] (at your option) any later version.
2020-03-11 22:03:01,241 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-03-11 22:03:01,244 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] This program is distributed in the hope that it will be useful,
2020-03-11 22:03:01,246 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] but WITHOUT ANY WARRANTY; without even the implied warranty of
2020-03-11 22:03:01,248 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
2020-03-11 22:03:01,250 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] GNU Affero General Public License for more details.
2020-03-11 22:03:01,252 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] 
2020-03-11 22:03:01,255 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] You should have received a copy of the GNU Affero General Public License
2020-03-11 22:03:01,257 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] along with this program.  If not, see <http://www.gnu.org/licenses/>.
2020-03-11 22:03:01,354 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onStartSliceCompleted [429]: Sending slice message took 0.4096109867095947 seconds
2020-03-11 22:03:01,501 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING]  -s acceleration_layer_0="3000" -s raft_surface_line_spacing="0.4" -s jerk_travel_layer_0="30.0" -s minimum_interface_area="1.0" -s slicing_tolerance="middle" -s coasting_speed="90" -s switch_extruder_extra_prime_amount="0" -s roofing_material_flow="100" -s wall_line_width="0.4" -s material_break_preparation_temperature="210" -s top_skin_expand_distance="0.8" -s material_linear_advance_factor_support_interface="0" -s retract_at_layer_change="False" -s material_bed_temperature="63" -s machine_width="200" -s machine_max_feedrate_y="299792458000" -s smooth_spiralized_contours="True" -s prime_tower_brim_enable="False" -s outer_inset_first="False" -s adaptive_layer_height_variation="0.1" -s cross_infill_density_image="" -s retraction_min_travel="0.8" -s support_interface_skip_height="0.3" -s bridge_skin_speed_2="15.0" -s date="11-03-2020" -s speed_support_roof="20.0" -s platform_adhesion="0" -s raft_base_thickness="0.36" -s meshfix_union_all_remove_holes="False" -s skirt_line_count="4" -s infill_angles="[ ]" -s jerk_layer_0="20" -s speed_print="60" -s print_temperature="210" -s material_guid="" -s default_material_bed_temperature="60" -s initial_extruder_nr="0" -s support_conical_min_width="5.0" -s raft_jerk="20" -s nozzle_disallowed_areas="[]" -s support_interface_extruder_nr="0" -s support_tower_maximum_supported_diameter="3.0" -s acceleration_wall_0="3000" -s speed_roofing="30.0" -s speed_wall_x="60.0" -s magic_mesh_surface_mode="normal" -s top_skin_preshrink="0.8" -s wipe_hop_amount="1" -s support_join_distance="2.0" -s gradual_infill_steps="0" -s raft_surface_line_width="0.4" -s top_bottom_extruder_nr="-1" -s mold_enabled="False" -s support_use_towers="True" -s minimum_support_area="0.0" -s limit_support_retractions="True" -s support_bottom_line_distance="0.4" -s coasting_enable="False" -s bridge_settings_enabled="False" -s machine_max_acceleration_e="10000" -s max_skin_angle_for_expansion="90" -s wireframe_flow="100" -s ironing_line_spacing="0.1" -s raft_interface_acceleration="3000" -s infill_enable_travel_optimization="False" -s support_bottom_height="1" -s clean_between_layers="False" -s prime_tower_size="20" -s prime_tower_enable="False" -s raft_surface_acceleration="3000" -s skin_preshrink="0.8" -s support_interface_line_width="0.4" -s wipe_hop_speed="10" -s speed_layer_0="30.0" -s machine_start_gcode="" -s initial_layer_line_width_factor="100.0" -s material_end_of_filament_purge_speed="0.5" -s mold_roof_height="0.5" -s machine_nozzle_head_distance="3" -s acceleration_ironing="3000" -s prime_tower_flow="100" -s raft_interface_fan_speed="0" -s raft_surface_layers="2" -s skirt_brim_minimal_length="250" -s support_bottom_angles="[ ]" -s speed_support_bottom="20.0" -s raft_fan_speed="0" -s machine_max_feedrate_x="299792458000" -s raft_base_line_width="0.8" -s speed_ironing="20.0" -s support_interface_height="1" -s support_infill_extruder_nr="0" -s speed_support_interface="40.0" -s wireframe_flat_delay="0.1" -s command_line_settings="0" -s speed_support="60" -s infill="0" -s material_shrinkage_percentage="0" -s raft_interface_jerk="20" -s minimum_polygon_circumference="1.0" -s material_linear_advance_factor_support="0" -s brim_width="8.0" -s alternate_extra_perimeter="False" -s support_roof_enable="True" -s bridge_skin_support_threshold="50" -s retraction_retract_speed="25" -s material_print_temperature_layer_0="210" -s cool_fan_full_layer="2" -s roofing_angles="[ ]" -s support_enable="False" -s wall_line_count="2" -s support_bottom_pattern="concentric" -s ooze_shield_angle="60" -s machine_endstop_positive_direction_x="False" -s wireframe_top_jump="0.6" -s support_skip_zag_per_mm="20" -s bottom_skin_expand_distance="0.8" -s adaptive_layer_height_variation_step="0.01" -s raft_surface_jerk="20" -s connect_skin_polygons="False" -s infill_pattern="grid" -s extruders_enabled_count="1" -s support_tower_diameter="3.0" -s wall_x_material_flow="100" -s jerk_infill="20" -s cutting_mesh="False" -s machine_max_jerk_xy="20.0" -s support_interface_density="100" -s material_end_of_filament_purge_length="20" -s acceleration_support_bottom="3000" -s material_break_preparation_speed="2" -s wireframe_roof_drag_along="0.8" -s bridge_skin_material_flow_3="110" -s support_interface_pattern="concentric" -s bridge_fan_speed_2="0" -s initial_bottom_layers="8" -s wipe_retraction_retract_speed="25" -s multiple_mesh_overlap="0.15" -s draft_shield_height_limitation="full" -s wireframe_printspeed_flat="5" -s material_linear_advance_factor_infill="0" -s magic_fuzzy_skin_enabled="False" -s jerk_enabled="False" -s wipe_pause="0" -s wipe_retraction_prime_speed="25" -s jerk_support_bottom="20" -s material_no_load_move_factor="0.940860215" -s retraction_combing="all" -s material_flow_layer_0="100" -s wall_material_flow="100" -s raft_speed="30.0" -s mold_angle="40" -s machine_end_gcode="" -s machine_center_is_zero="False" -s wireframe_up_half_speed="0.3" -s machine_settings="0" -s acceleration_topbottom="3000" -s z_seam_position="back" -s magic_spiralize="False" -s meshfix_maximum_deviation="0.05" -s wall_overhang_angle="90" -s cool_fan_enabled="True" -s cool_fan_speed_max="100.0" -s cooling="0" -s draft_shield_dist="10" -s cool_min_layer_time_fan_speed_max="10" -s wipe_retraction_enable="True" -s day="Wed" -s machine_max_jerk_z="0.4" -s support_tree_angle="40" -s cross_infill_pocket_size="4.0" -s wall_line_width_0="0.4" -s support_offset="0" -s wireframe_fall_down="0.5" -s material_flow="100" -s material_break_speed="25" -s machine_extruders_share_heater="False" -s speed_wall_0="30.0" -s cool_lift_head="False" -s wall_0_inset="0" -s relative_extrusion="False" -s machine_min_cool_heat_time_window="50.0" -s layer_start_x="0.0" -s machine_max_acceleration_z="100" -s support_wall_count="0" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s skin_edge_support_thickness="0" -s wall_x_extruder_nr="-1" -s switch_extruder_prime_speed="20" -s extruder_prime_pos_x="0" -s build_volume_temperature="28" -s layer_start_y="0.0" -s infill_wipe_dist="0.1" -s cool_min_speed="10" -s wall_min_flow="0" -s ironing_flow="10.0" -s travel="0" -s magic_fuzzy_skin_outside_only="False" -s infill_line_width="0.4" -s meshfix_maximum_travel_resolution="0.8" -s support_extruder_nr_layer_0="0" -s acceleration_support_interface="3000" -s spaghetti_max_infill_angle="10" -s support_mesh_drop_down="True" -s wipe_hop_enable="False" -s zig_zaggify_support="False" -s machine_depth="200" -s material_bed_temp_wait="True" -s machine_endstop_positive_direction_z="True" -s coasting_volume="0.064" -s mesh_position_x="0" -s prime_tower_position_y="175.584" -s material_linear_advance_factor_wall_0="0" -s wall_0_wipe_dist="0.2" -s travel_speed="120" -s speed="0" -s flow_rate_max_extrusion_offset="0" -s material_diameter="2.85" -s infill_overlap_mm="0.04" -s mesh_position_z="0" -s conical_overhang_angle="50" -s zig_zaggify_infill="False" -s speed_z_hop="10" -s machine_nozzle_size="0.4" -s top_layers="8" -s infill_multiplier="1" -s spaghetti_inset="0.2" -s top_bottom_pattern_0="lines" -s jerk_wall="20" -s travel_avoid_other_parts="True" -s acceleration_print_layer_0="3000" -s material_break_temperature="50" -s wipe_retraction_amount="6.5" -s machine_heat_zone_length="16" -s jerk_skirt_brim="20" -s raft_base_line_spacing="1.6" -s speed_support_infill="60" -s max_extrusion_before_wipe="10" -s bottom_layers="8" -s material_flow_dependent_temperature="False" -s machine_firmware_retract="False" -s switch_extruder_retraction_speeds="20" -s material_linear_advance_factor_wall_x="0" -s acceleration_print="3000" -s machine_use_extruder_offset_to_offset_coords="True" -s machine_heated_bed="True" -s travel_compensate_overlapping_walls_0_enabled="True" -s skin_angles="[ ]" -s machine_steps_per_mm_z="50" -s speed_topbottom="30.0" -s raft_smoothing="5" -s support_line_width="0.4" -s ooze_shield_enabled="False" -s support_skip_some_zags="False" -s min_skin_width_for_expansion="4.898587196589413e-17" -s machine_endstop_positive_direction_y="False" -s wireframe_top_delay="0" -s ooze_shield_dist="2" -s prime_tower_min_volume="6" -s machine_disallowed_areas="[]" -s jerk_support_interface="20" -s infill_extruder_nr="-1" -s infill_sparse_density="20" -s wireframe_roof_inset="3" -s jerk_print_layer_0="20" -s material_anti_ooze_retracted_position="-4" -s support_roof_material_flow="100" -s alternate_carve_order="True" -s support_bottom_extruder_nr="0" -s support_xy_distance_overhang="0.2" -s speed_equalize_flow_max="150" -s layer_height="0.1" -s infill_mesh="False" -s material_break_preparation_retracted_position="-16" -s jerk_topbottom="20" -s remove_empty_first_layers="True" -s acceleration_wall="3000" -s support_bottom_material_flow="100" -s acceleration_travel="5000" -s ironing_enabled="False" -s skin_no_small_gaps_heuristic="False" -s support_infill_sparse_thickness="0.1" -s material_bed_temperature_layer_0="63" -s machine_steps_per_mm_e="1600" -s support_bottom_distance="0" -s wall_thickness="0.8" -s material_crystallinity="False" -s cool_min_layer_time="5" -s material_linear_advance_factor="0" -s support_infill_angles="[ ]" -s shell="0" -s support_roof_pattern="concentric" -s support_mesh="False" -s support_material_flow="100" -s bridge_fan_speed="100" -s acceleration_roofing="3000" -s retraction_hop_enabled="False" -s switch_extruder_retraction_speed="20" -s small_feature_speed_factor="50" -s gradual_support_infill_steps="0" -s bridge_skin_density_3="80" -s support_interface_enable="False" -s retraction_speed="25" -s bridge_skin_speed="15.0" -s skirt_brim_material_flow="100" -s raft_base_jerk="20" -s time="22:03:01" -s machine_buildplate_type="glass" -s z_seam_y="200" -s machine_feeder_wheel_diameter="10.0" -s retraction_hop_only_when_collides="False" -s infill_support_angle="40" -s support_brim_width="8.0" -s cool_fan_speed_min="100.0" -s wipe_move_distance="20" -s bridge_fan_speed_3="0" -s wireframe_roof_outer_delay="0.2" -s ironing_inset="0.2" -s support_tree_branch_diameter_angle="5" -s speed_slowdown_layers="2" -s default_material_print_temperature="210" -s roofing_layer_count="0" -s bridge_skin_density_2="75" -s retraction_amount="6.5" -s wipe_retraction_speed="25" -s material_final_print_temperature="195" -s bridge_wall_material_flow="50" -s gantry_height="180" -s material_surface_energy="100" -s raft_interface_line_width="0.8" -s infill_offset_x="0" -s speed_equalize_flow_enabled="False" -s adaptive_layer_height_threshold="0.2" -s raft_interface_line_spacing="1.0" -s material_flush_purge_length="60" -s machine_nozzle_heat_up_speed="2.0" -s raft_surface_fan_speed="0" -s machine_max_feedrate_e="299792458000" -s spaghetti_infill_stepped="True" -s support_xy_distance="0.7" -s speed_wall="30.0" -s sub_div_rad_add="0.4" -s bottom_skin_preshrink="0.8" -s machine_steps_per_mm_y="50" -s wireframe_printspeed="5" -s support_tree_branch_diameter="2" -s jerk_support_infill="20" -s wall_overhang_speed_factor="100" -s adhesion_extruder_nr="0" -s mold_width="5" -s machine_acceleration="4000" -s support_bottom_stair_step_width="5.0" -s travel_compensate_overlapping_walls_x_enabled="True" -s cool_fan_speed_0="0" -s blackmagic="0" -s infill_support_enabled="False" -s support_brim_line_count="20" -s support_roof_height="1.2" -s center_object="False" -s skirt_brim_line_width="0.4" -s top_bottom_pattern="lines" -s print_sequence="all_at_once" -s skin_overlap="5" -s wireframe_nozzle_clearance="1" -s speed_infill="60" -s wipe_retraction_extra_prime_amount="0" -s retraction_combing_max_distance="0" -s z_seam_x="100.0" -s draft_shield_height="10" -s wireframe_height="3" -s z_seam_relative="False" -s cross_support_density_image="" -s top_bottom_thickness="0.8" -s skirt_brim_speed="30.0" -s switch_extruder_retraction_amount="16" -s material_maximum_park_duration="300" -s machine_nozzle_temp_enabled="True" -s raft_base_speed="22.5" -s support_angle="70" -s jerk_ironing="20" -s expand_skins_expand_distance="0.8" -s roofing_line_width="0.4" -s machine_shape="rectangular" -s conical_overhang_enabled="False" -s speed_travel_layer_0="60.0" -s wireframe_printspeed_bottom="5" -s machine_minimum_feedrate="0.0" -s line_width="0.4" -s optimize_wall_printing_order="False" -s raft_surface_speed="30.0" -s machine_height="180" -s travel_retract_before_outer_wall="False" -s prime_blob_enable="False" -s meshfix_keep_open_polygons="False" -s wireframe_straight_before_down="20" -s z_seam_corner="z_seam_corner_inner" -s machine_head_with_fans_polygon="[[-20, 10], [10, 10], [10, -10], [-20, -10]]" -s ironing_only_highest_layer="False" -s acceleration_wall_x="3000" -s carve_multiple_volumes="False" -s flow_rate_extrusion_offset_factor="100" -s wireframe_printspeed_up="5" -s resolution="0" -s raft_surface_thickness="0.1" -s acceleration_travel_layer_0="5000.0" -s wipe_brush_pos_x="100" -s machine_nozzle_id="unknown" -s material_linear_advance_factor_wall="0" -s coasting_min_volume="0.8" -s cool_fan_speed="100.0" -s support_zag_skip_count="8" -s fill_outline_gaps="False" -s machine_filament_park_distance="16" -s wireframe_flow_flat="100" -s speed_print_layer_0="30.0" -s support="0" -s infill_mesh_order="0" -s spaghetti_infill_enabled="False" -s acceleration_support="3000" -s acceleration_support_roof="3000" -s support_roof_offset="0.0" -s material_extrusion_cool_down_speed="0.7" -s support_tree_branch_distance="1" -s meshfix_maximum_resolution="0.5" -s wipe_repeat_count="5" -s material_standby_temperature="150" -s brim_outside_only="True" -s machine_heated_build_volume="False" -s support_conical_angle="30" -s support_brim_enable="False" -s cool_fan_full_at_height="0.3" -s support_xy_overrides_z="z_overrides_xy" -s min_infill_area="0" -s machine_nozzle_tip_outer_diameter="1" -s support_pattern="lines" -s brim_replaces_support="True" -s adhesion_z_offset_extensive_processing="False" -s skirt_gap="3" -s support_tower_roof_angle="65" -s extruder_prime_pos_z="0" -s retraction_hop_after_extruder_switch_height="1" -s acceleration_prime_tower="3000" -s material_print_temp_prepend="True" -s wireframe_printspeed_down="5" -s wireframe_flow_connection="100" -s acceleration_skirt_brim="3000" -s meshfix="0" -s top_thickness="0.8" -s acceleration_enabled="False" -s support_roof_extruder_nr="0" -s support_roof_angles="[ ]" -s material_print_temp_wait="True" -s support_top_distance="0.1" -s retraction_hop_after_extruder_switch="True" -s support_roof_line_width="0.4" -s brim_gap="0" -s acceleration_support_infill="3000" -s bridge_sparse_infill_max_density="0" -s bridge_skin_speed_3="15.0" -s spaghetti_flow="20" -s magic_fuzzy_skin_point_dist="0.8" -s filter_out_tiny_gaps="True" -s jerk_print="20" -s minimum_roof_area="1.0" -s mesh_position_y="0" -s infill_randomize_start_location="False" -s fill_perimeter_gaps="everywhere" -s prime_tower_wipe_enabled="True" -s retraction_hop="1" -s jerk_wall_0="20" -s machine_name="Wanhao Duplicator i3 Plus" -s support_supported_skin_fan_speed="100" -s infill_wall_line_count="0" -s connect_infill_polygons="False" -s retraction_extrusion_window="6.5" -s support_fan_enable="False" -s machine_show_variants="False" -s skin_line_width="0.4" -s acceleration_infill="3000" -s travel_avoid_supports="False" -s ironing_pattern="zigzag" -s speed_travel="120" -s layer_0_z_overlap="0.15" -s machine_max_acceleration_y="9000" -s support_tree_enable="False" -s support_interface_offset="0.0" -s retraction_count_max="90" -s infill_offset_y="0" -s brim_line_count="12" -s support_roof_line_distance="0.4" -s prime_tower_line_width="0.4" -s anti_overhang_mesh="False" -s infill_material_flow="100" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s adhesion_type="skirt" -s material_linear_advance_factor_topbottom="0" -s wireframe_enabled="False" -s jerk_support_roof="20" -s machine_extruder_count="1" -s xy_offset_layer_0="0" -s adaptive_layer_height_enabled="False" -s spaghetti_infill_extra_volume="0" -s support_connect_zigzags="True" -s jerk_travel="30" -s layer_height_0="0.3" -s material_linear_advance_factor_skirt_brim="0" -s machine_nozzle_cool_down_speed="2.0" -s raft_airgap="0.3" -s material_flush_purge_speed="0.5" -s wireframe_strategy="compensate" -s machine_gcode_flavor="RepRap (Marlin/Sprinter)" -s wireframe_roof_fall_down="2" -s raft_acceleration="3000" -s small_hole_max_size="0" -s support_z_distance="0.1" -s meshfix_union_all="True" -s material="0" -s material_bed_temp_prepend="True" -s infill_before_walls="True" -s bridge_enable_more_layers="True" -s raft_base_acceleration="3000" -s wall_extruder_nr="-1" -s wireframe_drag_along="0.6" -s machine_nozzle_expansion_angle="45" -s machine_steps_per_mm_x="50" -s experimental="0" -s prime_tower_position_x="195.584" -s bridge_wall_min_length="5" -s wall_min_flow_retract="False" -s extruder_prime_pos_y="0" -s skin_material_flow="100" -s support_bottom_density="100" -s wall_0_material_flow="100" -s jerk_support="20" -s wall_line_width_x="0.4" -s roofing_extruder_nr="-1" -s raft_margin="15" -s machine_max_jerk_e="5.0" -s small_feature_max_length="0.0" -s skin_overlap_mm="0.02" -s support_interface_angles="[ ]" -s bottom_thickness="0.8" -s retraction_prime_speed="25" -s z_seam_type="sharpest_corner" -s material_linear_advance_factor_prime_tower="0" -s print_bed_temperature="63" -s support_bottom_enable="False" -s dual="0" -s support_roof_density="100" -s spaghetti_max_height="2.0" -s machine_max_feedrate_z="299792458000" -s support_infill_rate="15" -s travel_compensate_overlapping_walls_enabled="True" -s magic_fuzzy_skin_point_density="1.25" -s wireframe_bottom_delay="0" -s support_conical_enabled="False" -s material_anti_ooze_retraction_speed="5" -s support_interface_material_flow="100" -s infill_overlap="10" -s support_bottom_stair_step_height="0.3" -s adhesion_z_offset="0" -s bridge_wall_coast="100" -s skin_edge_support_layers="0" -s support_type="buildplate" -s bridge_skin_density="100" -s raft_base_fan_speed="0" -s support_tree_collision_resolution="0.2" -s support_initial_layer_line_distance="2.6666666666666665" -s gradual_support_infill_step_height="1" -s bridge_wall_speed="15.0" -s support_bottom_offset="0.0" -s minimum_bottom_area="1.0" -s infill_line_distance="4.0" -s raft_interface_speed="22.5" -s travel_avoid_distance="0.625" -s speed_prime_tower="60" -s extruder_prime_pos_abs="False" -s material_adhesion_tendency="10" -s infill_sparse_thickness="0.1" -s jerk_roofing="20" -s gradual_infill_step_height="1.5" -s machine_max_acceleration_x="9000" -s bridge_skin_material_flow_2="100" -s bridge_skin_material_flow="60" -s material_print_temperature="210" -s retraction_enable="True" -s support_line_distance="2.6666666666666665" -s draft_shield_enabled="False" -s wall_0_extruder_nr="-1" -s raft_interface_thickness="0.15000000000000002" -s xy_offset="0" -s jerk_prime_tower="20" -s skin_outline_count="1" -s support_bottom_line_width="0.4" -s retraction_extra_prime_amount="0" -s jerk_wall_x="20" -s small_feature_speed_factor_0="50" -s support_extruder_nr="0" -s meshfix_extensive_stitching="False" -s magic_fuzzy_skin_thickness="0.3" -s material_break_retracted_position="-50" -s material_initial_print_temperature="200" -s roofing_pattern="lines" -e0 -s acceleration_layer_0="3000" -s raft_surface_line_spacing="0.4" -s jerk_travel_layer_0="30.0" -s minimum_interface_area="1.0" -s machine_nozzle_offset_y="0" -s coasting_speed="90" -s switch_extruder_extra_prime_amount="0" -s roofing_material_flow="100" -s wall_line_width="0.4" -s material_break_preparation_temperature="217" -s slicing_tolerance="exclusive" -s machine_extruder_end_pos_y="0" -s support_bottom_density="100" -s skin_material_flow="100" -s top_skin_expand_distance="1.6" -s material_linear_advance_factor_support_interface="0" -s retract_at_layer_change="False" -s machine_extruder_start_pos_abs="False" -s material_linear_advance_factor_topbottom="0" -s outer_inset_first="False" -s cross_infill_density_image="" -s retraction_min_travel="0.8" -s support_interface_skip_height="0.3" -s bridge_skin_speed_2="10" -s speed_support_roof="20.0" -s platform_adhesion="0" -s raft_base_thickness="0.36" -s meshfix_union_all_remove_holes="False" -s skirt_line_count="4" -s infill_angles="[ ]" -s jerk_layer_0="20" -s support_roof_pattern="concentric" -s speed_print="30" -s material_guid="0ff92885-617b-4144-a03c-9989872454bc" -s roofing_pattern="lines" -s support_conical_min_width="5.0" -s raft_jerk="20" -s support_tower_maximum_supported_diameter="3.0" -s acceleration_wall_0="3000" -s speed_roofing="15.0" -s speed_wall_x="30.0" -s magic_mesh_surface_mode="normal" -s top_skin_preshrink="1.6" -s wipe_hop_amount="1" -s support_join_distance="2.0" -s gradual_infill_steps="0" -s mold_enabled="False" -s support_use_towers="True" -s minimum_support_area="0.0" -s limit_support_retractions="True" -s support_bottom_line_distance="0.4" -s machine_nozzle_offset_x="0" -s cool_fan_speed_max="80" -s cool_fan_enabled="True" -s wall_overhang_angle="90" -s support_line_distance="2.6666666666666665" -s retraction_enable="True" -s jerk_wall_0="20" -s retraction_hop="1" -s max_skin_angle_for_expansion="90" -s ironing_line_spacing="0.1" -s material_flow="100" -s support_offset="0" -s infill_overlap="14" -s support_interface_material_flow="100" -s extruder_nr="0" -s retraction_hop_enabled="False" -s switch_extruder_retraction_speed="20" -s acceleration_roofing="3000" -s raft_surface_acceleration="3000" -s mesh_position_z="0" -s conical_overhang_angle="50" -s infill_overlap_mm="0.05600000000000001" -s clean_between_layers="False" -s skin_preshrink="1.6" -s wipe_hop_speed="10" -s material_flush_purge_length="60" -s machine_nozzle_heat_up_speed="2.0" -s raft_interface_line_spacing="1.0" -s mold_roof_height="0.5" -s acceleration_ironing="3000" -s prime_tower_flow="100" -s ironing_flow="10.0" -s wall_min_flow="0" -s raft_surface_layers="2" -s skirt_brim_minimal_length="250" -s material_adhesion_tendency="0" -s extruder_prime_pos_abs="False" -s support_line_width="0.4" -s experimental="0" -s speed_ironing="10.0" -s support_interface_height="1" -s command_line_settings="0" -s material_linear_advance_factor_support="0" -s acceleration_wall_x="3000" -s bridge_skin_support_threshold="50" -s retraction_prime_speed="65" -s material_linear_advance_factor_prime_tower="0" -s z_seam_type="sharpest_corner" -s support_interface_line_width="0.4" -s support_bottom_angles="[ ]" -s support_skip_zag_per_mm="20" -s bottom_skin_expand_distance="1.6" -s support_connect_zigzags="True" -s spaghetti_infill_extra_volume="0" -s connect_skin_polygons="False" -s infill_pattern="grid" -s raft_base_jerk="20" -s jerk_infill="20" -s machine_steps_per_mm_x="50" -s coasting_enable="False" -s support_interface_density="100" -s retraction_hop_after_extruder_switch="True" -s support_top_distance="0.1" -s jerk_support="20" -s wall_line_width_x="0.4" -s bridge_skin_material_flow_3="110" -s support_interface_pattern="concentric" -s bridge_fan_speed_2="0" -s initial_bottom_layers="6" -s wipe_retraction_retract_speed="65" -s multiple_mesh_overlap="0.15" -s material_linear_advance_factor_infill="0" -s magic_fuzzy_skin_enabled="False" -s wipe_hop_enable="False" -s zig_zaggify_support="False" -s wipe_pause="0" -s wipe_retraction_prime_speed="65" -s jerk_support_bottom="20" -s material_no_load_move_factor="0.940860215" -s material_flow_layer_0="100" -s wall_material_flow="100" -s raft_speed="15.0" -s mold_angle="40" -s machine_settings="0" -s acceleration_topbottom="3000" -s z_seam_position="back" -s cooling="0" -s cool_min_layer_time_fan_speed_max="10" -s support_roof_material_flow="100" -s support_tree_angle="40" -s cross_infill_pocket_size="2.5" -s wall_line_width_0="0.4" -s material_break_speed="25" -s speed_wall_0="15.0" -s cool_lift_head="False" -s connect_infill_polygons="False" -s machine_extruder_start_code="" -s machine_min_cool_heat_time_window="50.0" -s layer_start_x="0.0" -s support_wall_count="0" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s skin_edge_support_thickness="0" -s switch_extruder_prime_speed="20" -s extruder_prime_pos_x="0" -s layer_start_y="0.0" -s infill_wipe_dist="0.1" -s cool_min_speed="10" -s travel="0" -s initial_layer_line_width_factor="104.0" -s magic_fuzzy_skin_outside_only="False" -s infill_line_width="0.4" -s acceleration_support_interface="3000" -s spaghetti_max_infill_angle="10" -s material_end_of_filament_purge_speed="0.5" -s raft_margin="15" -s machine_endstop_positive_direction_z="True" -s coasting_volume="0.064" -s speed="0" -s material_diameter="1.75" -s speed_z_hop="10" -s raft_interface_jerk="20" -s material_shrinkage_percentage="0" -s machine_nozzle_size="0.4" -s top_layers="6" -s infill_multiplier="1" -s spaghetti_inset="0.2" -s alternate_extra_perimeter="False" -s support_roof_enable="True" -s top_bottom_pattern_0="lines" -s meshfix_maximum_travel_resolution="0.8" -s dual="0" -s support_bottom_enable="False" -s jerk_wall="20" -s travel_avoid_other_parts="True" -s acceleration_print_layer_0="3000" -s support_bottom_pattern="concentric" -s material_linear_advance_factor_wall_x="0" -s acceleration_print="3000" -s material_break_temperature="50" -s wipe_retraction_amount="2.5" -s material_initial_print_temperature="207" -s material_break_retracted_position="-50" -s machine_heat_zone_length="16" -s jerk_skirt_brim="20" -s bottom_layers="6" -s material_flow_dependent_temperature="False" -s switch_extruder_retraction_speeds="20" -s travel_compensate_overlapping_walls_0_enabled="True" -s skin_angles="[ ]" -s machine_steps_per_mm_z="50" -s speed_topbottom="15.0" -s raft_smoothing="5" -s support_skip_some_zags="False" -s wall_x_material_flow="100" -s min_skin_width_for_expansion="3.67394039744206e-17" -s machine_extruder_end_pos_x="0" -s prime_tower_min_volume="6" -s jerk_support_interface="20" -s infill_sparse_density="32" -s jerk_print_layer_0="20" -s material_anti_ooze_retracted_position="-4" -s infill_enable_travel_optimization="False" -s speed_layer_0="12" -s raft_surface_speed="15.0" -s support_supported_skin_fan_speed="100" -s infill_wall_line_count="0" -s support_xy_distance_overhang="0.2" -s speed_equalize_flow_max="150" -s material_break_preparation_retracted_position="-16" -s raft_surface_line_width="0.4" -s acceleration_wall="3000" -s support_bottom_material_flow="100" -s acceleration_travel="5000" -s ironing_enabled="False" -s support_bottom_stair_step_height="0.3" -s brim_outside_only="True" -s material_standby_temperature="175" -s machine_steps_per_mm_e="1600" -s support_bottom_distance="0" -s wall_thickness="0.8" -s material_crystallinity="False" -s support_initial_layer_line_distance="2.6666666666666665" -s meshfix_union_all="True" -s support_z_distance="0.1" -s retraction_hop_only_when_collides="False" -s machine_feeder_wheel_diameter="10.0" -s speed_travel="150" -s layer_0_z_overlap="0.15" -s support_angle="70" -s raft_base_speed="11.25" -s ironing_pattern="zigzag" -s brim_gap="0" -s acceleration_support_infill="3000" -s support_roof_line_width="0.4" -s gradual_support_infill_steps="0" -s bridge_skin_density_3="80" -s support_interface_enable="False" -s brim_width="8.0" -s speed_support_infill="30" -s raft_base_line_spacing="1.6" -s max_extrusion_before_wipe="10" -s wall_0_inset="0" -s material="0" -s infill_before_walls="True" -s small_hole_max_size="0" -s raft_surface_jerk="20" -s infill_support_angle="40" -s cool_fan_speed_min="80" -s wipe_move_distance="20" -s bridge_fan_speed_3="0" -s ironing_inset="0.2" -s support_roof_density="100" -s spaghetti_max_height="2.0" -s retraction_retract_speed="65" -s zig_zaggify_infill="False" -s meshfix_maximum_resolution="0.5" -s wipe_repeat_count="5" -s support_tree_branch_distance="1" -s top_bottom_thickness="0.8" -s skirt_brim_speed="12" -s switch_extruder_retraction_amount="16" -s material_maximum_park_duration="300" -s machine_nozzle_temp_enabled="True" -s machine_endstop_positive_direction_x="False" -s material_final_print_temperature="202" -s retraction_extrusion_window="2.5" -s support_fan_enable="False" -s machine_extruder_start_pos_y="0" -s material_surface_energy="100" -s raft_interface_line_width="0.8" -s infill_offset_x="0" -s z_seam_x="100.0" -s retraction_combing_max_distance="0" -s speed_equalize_flow_enabled="False" -s machine_extruder_start_pos_x="0" -s support_tower_diameter="3.0" -s bridge_skin_density_2="75" -s retraction_amount="2.5" -s wipe_retraction_speed="65" -s raft_interface_acceleration="3000" -s raft_surface_fan_speed="0" -s spaghetti_infill_stepped="True" -s support_xy_distance="0.7" -s speed_wall="15.0" -s sub_div_rad_add="0.4" -s bottom_skin_preshrink="1.6" -s small_feature_speed_factor_0="50" -s jerk_support_infill="20" -s wall_overhang_speed_factor="100" -s mold_width="5" -s material_linear_advance_factor_wall_0="0" -s wall_0_wipe_dist="0.2" -s support_bottom_stair_step_width="5.0" -s bridge_fan_speed="100" -s support_material_flow="100" -s raft_base_acceleration="3000" -s wipe_retraction_enable="True" -s material_linear_advance_factor="0" -s cool_min_layer_time="5" -s support_infill_sparse_thickness="0.1" -s support_roof_height="1.2" -s cool_fan_full_layer="2" -s center_object="False" -s skirt_brim_line_width="0.4" -s top_bottom_pattern="lines" -s skin_overlap="5" -s speed_infill="30" -s wipe_retraction_extra_prime_amount="0" -s z_seam_relative="False" -s cross_support_density_image="" -s roofing_angles="[ ]" -s jerk_ironing="20" -s infill_sparse_thickness="0.1" -s brim_line_count="12" -s support_roof_line_distance="0.4" -s prime_tower_line_width="0.4" -s mesh_position_x="0" -s expand_skins_expand_distance="1.6" -s small_feature_speed_factor="50" -s roofing_line_width="0.4" -s conical_overhang_enabled="False" -s speed_travel_layer_0="60.0" -s line_width="0.4" -s optimize_wall_printing_order="False" -s prime_blob_enable="False" -s meshfix_keep_open_polygons="False" -s meshfix_extensive_stitching="False" -s magic_fuzzy_skin_thickness="0.3" -s resolution="0" -s raft_surface_thickness="0.1" -s acceleration_travel_layer_0="5000.0" -s wipe_brush_pos_x="100" -s machine_nozzle_id="unknown" -s material_linear_advance_factor_wall="0" -s coasting_min_volume="0.8" -s cool_fan_speed="80" -s support_bottom_line_width="0.4" -s support_zag_skip_count="8" -s fill_outline_gaps="False" -s machine_filament_park_distance="16" -s speed_print_layer_0="12" -s support="0" -s spaghetti_infill_enabled="False" -s retraction_hop_after_extruder_switch_height="1" -s machine_extruder_end_pos_abs="False" -s acceleration_support="3000" -s acceleration_support_roof="3000" -s support_roof_offset="0.0" -s skin_no_small_gaps_heuristic="False" -s fill_perimeter_gaps="everywhere" -s prime_tower_wipe_enabled="True" -s speed_support="30" -s material_end_of_filament_purge_length="20" -s material_break_preparation_speed="2" -s acceleration_support_bottom="3000" -s extruder_prime_pos_y="0" -s wall_min_flow_retract="False" -s retraction_count_max="90" -s support_xy_overrides_z="z_overrides_xy" -s machine_nozzle_tip_outer_diameter="1" -s min_infill_area="0" -s infill_offset_y="0" -s ironing_only_highest_layer="False" -s small_feature_max_length="0.0" -s skin_overlap_mm="0.02" -s support_interface_angles="[ ]" -s bottom_thickness="0.8" -s bridge_sparse_infill_max_density="0" -s support_pattern="lines" -s bridge_skin_speed_3="10" -s spaghetti_flow="20" -s magic_fuzzy_skin_point_dist="0.8" -s filter_out_tiny_gaps="True" -s jerk_print="20" -s skin_edge_support_layers="0" -s meshfix_maximum_deviation="0.05" -s machine_extruder_end_code="" -s skin_line_width="0.4" -s skirt_gap="3" -s acceleration_prime_tower="3000" -s support_tower_roof_angle="65" -s extruder_prime_pos_z="0" -s xy_offset_layer_0="0" -s acceleration_infill="3000" -s travel_avoid_supports="False" -s support_interface_offset="0.0" -s meshfix="0" -s acceleration_skirt_brim="3000" -s speed_support_bottom="20.0" -s material_extrusion_cool_down_speed="0.7" -s material_flow_temp_graph="[[3.5,200],[7.0,240]]" -s machine_nozzle_head_distance="3" -s support_brim_width="8.0" -s mesh_position_y="0" -s infill_randomize_start_location="False" -s bridge_skin_speed="10" -s skirt_brim_material_flow="100" -s infill_material_flow="100" -s shell="0" -s support_infill_angles="[ ]" -s cool_fan_speed_0="0" -s blackmagic="0" -s support_brim_line_count="20" -s infill_support_enabled="False" -s top_thickness="0.8" -s jerk_travel="30" -s material_linear_advance_factor_skirt_brim="0" -s machine_nozzle_cool_down_speed="2.0" -s raft_airgap="0.3" -s material_flush_purge_speed="0.5" -s support_bottom_height="1" -s raft_acceleration="3000" -s bridge_enable_more_layers="True" -s infill="0" -s speed_prime_tower="30" -s raft_base_line_width="0.8" -s bridge_skin_density="100" -s support_tree_branch_diameter_angle="5" -s raft_base_fan_speed="0" -s support_tree_collision_resolution="0.2" -s travel_compensate_overlapping_walls_x_enabled="True" -s machine_extruder_cooling_fan_number="0" -s minimum_roof_area="1.0" -s bridge_wall_material_flow="50" -s travel_avoid_distance="0.625" -s raft_interface_speed="11.25" -s bridge_skin_material_flow="60" -s material_print_temperature="217" -s support_infill_rate="15" -s travel_compensate_overlapping_walls_enabled="True" -s wall_line_count="4" -s magic_fuzzy_skin_point_density="1.25" -s support_roof_angles="[ ]" -s machine_steps_per_mm_y="50" -s support_tree_branch_diameter="2" -s default_material_print_temperature="200" -s roofing_layer_count="0" -s z_seam_corner="z_seam_corner_inner" -s support_conical_enabled="False" -s material_anti_ooze_retraction_speed="5" -s retraction_extra_prime_amount="0" -s jerk_topbottom="20" -s raft_interface_fan_speed="0" -s bridge_wall_coast="100" -s retraction_speed="65" -s wall_0_material_flow="100" -s support_conical_angle="30" -s support_brim_enable="False" -s cool_fan_full_at_height="0.3" -s gradual_support_infill_step_height="1" -s bridge_wall_speed="10" -s support_bottom_offset="0.0" -s infill_line_distance="2.5" -s minimum_bottom_area="1.0" -s jerk_roofing="20" -s gradual_infill_step_height="1.5" -s material_print_temperature_layer_0="217" -s speed_support_interface="20.0" -s bridge_skin_material_flow_2="100" -s raft_interface_thickness="0.15000000000000002" -s xy_offset="0" -s jerk_prime_tower="20" -s skin_outline_count="1" -s jerk_wall_x="20" -s brim_replaces_support="True" -s z_seam_y="200" -s raft_fan_speed="0" -s jerk_support_roof="20" -s machine_endstop_positive_direction_y="False" -g -e0 -l "0" -s extruder_nr="0"
2020-03-11 22:03:17,308 - DEBUG - [EngineErrorThread] UM.Backend.Backend._backendLog [101]: [Backend] [WARNING] Layer 417 is empty (or it has empty extruder plans). Temperature control and cross layer travel moves might suffer!
2020-03-11 22:03:17,619 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-11 22:03:17,624 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-11 22:03:17,661 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [663]: Slicing took 16.716758966445923 seconds
2020-03-11 22:03:17,661 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [664]: Number of models per buildplate: {0: 1}
2020-03-11 22:03:17,662 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [678]: See if there is more to slice...
2020-03-11 22:03:17,859 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [181]: Socket state changed to Closing
2020-03-11 22:03:17,863 - DEBUG - [MainThread] UM.Backend.Backend._onSocketError [203]: Socket debug: Arcus Error (13): Closing socket because other side requested close.
2020-03-11 22:03:17,867 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [183]: Socket state changed to Closed
2020-03-11 22:03:17,867 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onBackendQuit [829]: Backend quit with return code 0. Resetting process and socket.
2020-03-11 22:03:23,873 - DEBUG - [MainThread] LinearAdvanceSettingPlugin.LinearAdvanceSettingPlugin._filterGcode [109]: No used extruders specify a linear advance factor
2020-03-11 22:03:24,083 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.requestWrite [420]: Tried starting a print, but current state is offline
2020-03-11 22:03:24,102 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._processRequest [308]: Request [093460c7836142fda64107f2894eda5c] started
2020-03-11 22:03:24,105 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-11 22:03:24,512 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestFinished [369]: Request [093460c7836142fda64107f2894eda5c] finished.
2020-03-11 22:03:24,515 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-11 22:03:24,516 - INFO - [MainThread] SliceInfoPlugin.SliceInfo._onRequestFinished [275]: SliceInfo sent successfully
2020-03-11 22:03:26,060 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-03-11 22:03:32,839 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.disconnect [331]: Connection with instance BlueLeader with url http://octolinux:5003/ stopped
2020-03-11 22:03:32,850 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-11 22:03:32,852 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device BlueLeader already added
2020-03-11 22:03:32,853 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [310]: Connection with instance BlueLeader with url http://octolinux:5003/ started
2020-03-11 22:03:32,858 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-11 22:03:32,864 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/Resources/qml/UM/Dialog.qml:86:13: QML Loader: Binding loop detected for property "active"
2020-03-11 22:03:32,908 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device BlueLeader already added
2020-03-11 22:03:32,909 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [719]: Received an unexpected returncode: 403
2020-03-11 22:03:32,910 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x6000070b77a8>
2020-03-11 22:03:32,910 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:03:32,911 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x6000070b7968>
2020-03-11 22:03:32,911 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:03:32,913 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x6000070b7b28>
2020-03-11 22:03:32,913 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:03:33,440 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [263]: Trying to access OctoPrint instance at http://octolinux:5003/ with the provided API key.
2020-03-11 22:03:42,966 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [719]: Received an unexpected returncode: 403
2020-03-11 22:03:42,969 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x60000701e8c8>
2020-03-11 22:03:42,969 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:03:42,980 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x6000073b7b28>
2020-03-11 22:03:42,981 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:03:49,619 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [263]: Trying to access OctoPrint instance at http://octolinux:5003/ with the provided API key.
2020-03-11 22:03:49,698 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [506]: API key accepted by OctoPrint.
2020-03-11 22:04:00,580 - DEBUG - [MainThread] LinearAdvanceSettingPlugin.LinearAdvanceSettingPlugin._filterGcode [109]: No used extruders specify a linear advance factor
2020-03-11 22:04:00,783 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.requestWrite [420]: Tried starting a print, but current state is offline
2020-03-11 22:04:00,815 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._processRequest [308]: Request [e4628306afa04b1c96203d3d97e5d72b] started
2020-03-11 22:04:00,818 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-11 22:04:01,012 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestFinished [369]: Request [e4628306afa04b1c96203d3d97e5d72b] finished.
2020-03-11 22:04:01,016 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-11 22:04:01,016 - INFO - [MainThread] SliceInfoPlugin.SliceInfo._onRequestFinished [275]: SliceInfo sent successfully
2020-03-11 22:04:03,028 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-03-11 22:04:13,994 - DEBUG - [MainThread] LinearAdvanceSettingPlugin.LinearAdvanceSettingPlugin._filterGcode [109]: No used extruders specify a linear advance factor
2020-03-11 22:04:14,205 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.requestWrite [420]: Tried starting a print, but current state is offline
2020-03-11 22:04:14,218 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._processRequest [308]: Request [199e155e25594de88a08af78ca24350b] started
2020-03-11 22:04:14,221 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-11 22:04:14,480 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestFinished [369]: Request [199e155e25594de88a08af78ca24350b] finished.
2020-03-11 22:04:14,484 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-11 22:04:14,484 - INFO - [MainThread] SliceInfoPlugin.SliceInfo._onRequestFinished [275]: SliceInfo sent successfully
2020-03-11 22:04:16,072 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-03-11 22:04:46,956 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.disconnect [331]: Connection with instance BlueLeader with url http://octolinux:5003/ stopped
2020-03-11 22:04:46,969 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-11 22:04:46,971 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device BlueLeader already added
2020-03-11 22:04:46,972 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [310]: Connection with instance BlueLeader with url http://octolinux:5003/ started
2020-03-11 22:04:46,977 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-11 22:04:46,983 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/Resources/qml/UM/Dialog.qml:86:13: QML Loader: Binding loop detected for property "active"
2020-03-11 22:04:47,023 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device BlueLeader already added
2020-03-11 22:04:47,024 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [719]: Received an unexpected returncode: 403
2020-03-11 22:04:47,025 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x600007016628>
2020-03-11 22:04:47,025 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:04:47,027 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x6000070175e8>
2020-03-11 22:04:47,027 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:04:47,054 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x600007005828>
2020-03-11 22:04:47,055 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:04:47,569 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [263]: Trying to access OctoPrint instance at http://octolinux:5003/ with the provided API key.
2020-03-11 22:04:56,970 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [719]: Received an unexpected returncode: 403
2020-03-11 22:04:56,973 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x60000732e158>
2020-03-11 22:04:56,974 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:04:56,986 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x600007328248>
2020-03-11 22:04:56,987 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:05:03,463 - WARNING - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [458]: Start polling for AppKeys decision
2020-03-11 22:05:06,968 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [719]: Received an unexpected returncode: 403
2020-03-11 22:05:06,970 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x6000073a3b28>
2020-03-11 22:05:06,971 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:05:06,983 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x60000731f968>
2020-03-11 22:05:06,983 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:05:16,979 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [719]: Received an unexpected returncode: 403
2020-03-11 22:05:16,982 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x600007359f98>
2020-03-11 22:05:16,982 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:05:16,993 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x60000736aaf8>
2020-03-11 22:05:16,993 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:05:18,966 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [484]: AppKey granted
2020-03-11 22:05:26,974 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [719]: Received an unexpected returncode: 403
2020-03-11 22:05:26,978 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x6000073b6d98>
2020-03-11 22:05:26,978 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:05:26,990 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x6000073a2ee8>
2020-03-11 22:05:26,990 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:05:36,981 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [719]: Received an unexpected returncode: 403
2020-03-11 22:05:36,985 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x6000070242b8>
2020-03-11 22:05:36,985 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:05:36,998 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x6000070388d8>
2020-03-11 22:05:36,999 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:05:46,982 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [719]: Received an unexpected returncode: 403
2020-03-11 22:05:46,984 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x60000732e388>
2020-03-11 22:05:46,985 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:05:46,995 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x6000073a1358>
2020-03-11 22:05:46,995 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:05:56,980 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [719]: Received an unexpected returncode: 403
2020-03-11 22:05:56,982 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x60000709ff88>
2020-03-11 22:05:56,983 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:05:56,996 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x60000703ad98>
2020-03-11 22:05:56,996 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:06:06,977 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [719]: Received an unexpected returncode: 403
2020-03-11 22:06:06,979 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x60000736aaf8>
2020-03-11 22:06:06,979 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:06:06,989 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x600007021eb8>
2020-03-11 22:06:06,989 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:06:12,119 - WARNING - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [458]: Start polling for AppKeys decision
2020-03-11 22:06:15,051 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [484]: AppKey granted
2020-03-11 22:06:16,979 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [719]: Received an unexpected returncode: 403
2020-03-11 22:06:16,983 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x60000709b3b8>
2020-03-11 22:06:16,984 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:06:17,045 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x600007038328>
2020-03-11 22:06:17,045 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:06:26,976 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [719]: Received an unexpected returncode: 403
2020-03-11 22:06:26,980 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x600007058b08>
2020-03-11 22:06:26,980 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:06:26,993 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x6000070153c8>
2020-03-11 22:06:26,994 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:06:36,980 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [719]: Received an unexpected returncode: 403
2020-03-11 22:06:36,983 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x6000070016d8>
2020-03-11 22:06:36,984 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:06:36,998 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x60000703d048>
2020-03-11 22:06:36,998 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:06:43,714 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [263]: Trying to access OctoPrint instance at http://octolinux:5003/ with the provided API key.
2020-03-11 22:06:43,791 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [506]: API key accepted by OctoPrint.
2020-03-11 22:06:51,969 - DEBUG - [MainThread] LinearAdvanceSettingPlugin.LinearAdvanceSettingPlugin._filterGcode [109]: No used extruders specify a linear advance factor
2020-03-11 22:06:52,183 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.requestWrite [420]: Tried starting a print, but current state is offline
2020-03-11 22:06:52,221 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._processRequest [308]: Request [aa2ff438ab8c477e8d9bcd550f3c08f3] started
2020-03-11 22:06:52,225 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-11 22:06:52,551 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestFinished [369]: Request [aa2ff438ab8c477e8d9bcd550f3c08f3] finished.
2020-03-11 22:06:52,555 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-11 22:06:52,558 - INFO - [MainThread] SliceInfoPlugin.SliceInfo._onRequestFinished [275]: SliceInfo sent successfully
2020-03-11 22:06:53,918 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-03-11 22:07:46,893 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.disconnect [331]: Connection with instance BlueLeader with url http://octolinux:5003/ stopped
2020-03-11 22:07:46,906 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-11 22:07:46,908 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device BlueLeader already added
2020-03-11 22:07:46,909 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [310]: Connection with instance BlueLeader with url http://octolinux:5003/ started
2020-03-11 22:07:46,914 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-11 22:07:46,919 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/Resources/qml/UM/Dialog.qml:86:13: QML Loader: Binding loop detected for property "active"
2020-03-11 22:07:46,976 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device BlueLeader already added
2020-03-11 22:07:46,977 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [719]: Received an unexpected returncode: 403
2020-03-11 22:07:46,978 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x600007072fc8>
2020-03-11 22:07:46,978 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:07:46,980 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x600007073968>
2020-03-11 22:07:46,980 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:07:46,981 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x600007070f68>
2020-03-11 22:07:46,981 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:07:47,513 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [263]: Trying to access OctoPrint instance at http://octolinux:5003/ with the provided API key.
2020-03-11 22:07:51,328 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [263]: Trying to access OctoPrint instance at http://octolinux:5003/ with the provided API key.
2020-03-11 22:07:51,399 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [506]: API key accepted by OctoPrint.
2020-03-11 22:07:55,397 - DEBUG - [MainThread] LinearAdvanceSettingPlugin.LinearAdvanceSettingPlugin._filterGcode [109]: No used extruders specify a linear advance factor
2020-03-11 22:07:55,621 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.requestWrite [420]: Tried starting a print, but current state is offline
2020-03-11 22:07:55,650 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._processRequest [308]: Request [c296fe1478c7467cbfa460538749a604] started
2020-03-11 22:07:55,653 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-11 22:07:56,087 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestFinished [369]: Request [c296fe1478c7467cbfa460538749a604] finished.
2020-03-11 22:07:56,091 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-11 22:07:56,094 - INFO - [MainThread] SliceInfoPlugin.SliceInfo._onRequestFinished [275]: SliceInfo sent successfully
2020-03-11 22:08:04,177 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.disconnect [331]: Connection with instance BlueLeader with url http://octolinux:5003/ stopped
2020-03-11 22:08:04,191 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-11 22:08:04,193 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device BlueLeader already added
2020-03-11 22:08:04,195 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [310]: Connection with instance BlueLeader with url http://octolinux:5003/ started
2020-03-11 22:08:04,204 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-11 22:08:04,210 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/Resources/qml/UM/Dialog.qml:86:13: QML Loader: Binding loop detected for property "active"
2020-03-11 22:08:04,272 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device BlueLeader already added
2020-03-11 22:08:04,272 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [719]: Received an unexpected returncode: 403
2020-03-11 22:08:04,273 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x6000070323f8>
2020-03-11 22:08:04,273 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:08:04,274 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x600007033dc8>
2020-03-11 22:08:04,274 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:08:04,276 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x6000070327e8>
2020-03-11 22:08:04,276 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:08:04,806 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [263]: Trying to access OctoPrint instance at http://octolinux:5003/ with the provided API key.
2020-03-11 22:08:13,978 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x600007016e78>
2020-03-11 22:08:13,978 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:08:13,990 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [719]: Received an unexpected returncode: 403
2020-03-11 22:08:13,991 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x600007039e48>
2020-03-11 22:08:13,991 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:08:24,000 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [719]: Received an unexpected returncode: 403
2020-03-11 22:08:24,002 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x600007014b08>
2020-03-11 22:08:24,003 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:08:24,004 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x600007014be8>
2020-03-11 22:08:24,004 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:08:25,977 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-03-11 22:08:33,975 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [719]: Received an unexpected returncode: 403
2020-03-11 22:08:33,980 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x600007020fd8>
2020-03-11 22:08:33,980 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:08:33,991 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x60000702c478>
2020-03-11 22:08:33,991 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:08:35,297 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.disconnect [331]: Connection with instance BlueLeader with url http://octolinux:5003/ stopped
2020-03-11 22:08:35,309 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/DiscoverOctoPrintAction.qml:595: TypeError: Cannot call method 'getId' of undefined
2020-03-11 22:08:35,315 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-11 22:08:35,319 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device BlueLeader already added
2020-03-11 22:08:35,321 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [310]: Connection with instance BlueLeader with url http://octolinux:5003/ started
2020-03-11 22:08:35,365 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device BlueLeader already added
2020-03-11 22:08:35,366 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [719]: Received an unexpected returncode: 403
2020-03-11 22:08:35,367 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x60000704cef8>
2020-03-11 22:08:35,367 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:08:35,368 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x60000704c7f8>
2020-03-11 22:08:35,369 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:08:35,383 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x6000073e7348>
2020-03-11 22:08:35,383 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:08:35,897 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [263]: Trying to access OctoPrint instance at http://octolinux:5003/ with the provided API key.
2020-03-11 22:08:42,002 - WARNING - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [458]: Start polling for AppKeys decision
2020-03-11 22:08:44,972 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-03-11 22:08:45,020 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [719]: Received an unexpected returncode: 403
2020-03-11 22:08:45,022 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x6000073e3ab8>
2020-03-11 22:08:45,022 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:08:45,033 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [484]: AppKey granted
2020-03-11 22:08:45,034 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x6000070172d8>
2020-03-11 22:08:45,035 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:08:54,978 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [719]: Received an unexpected returncode: 403
2020-03-11 22:08:54,980 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x60000705e468>
2020-03-11 22:08:54,981 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:08:54,992 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x60000702a9a8>
2020-03-11 22:08:54,994 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:08:59,271 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.disconnect [331]: Connection with instance BlueLeader with url http://octolinux:5003/ stopped
2020-03-11 22:08:59,283 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/DiscoverOctoPrintAction.qml:595: TypeError: Cannot call method 'getId' of undefined
2020-03-11 22:08:59,291 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-11 22:08:59,294 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device BlueLeader already added
2020-03-11 22:08:59,295 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [310]: Connection with instance BlueLeader with url https://octolinux:5003/ started
2020-03-11 22:08:59,845 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [263]: Trying to access OctoPrint instance at https://octolinux:5003/ with the provided API key.
2020-03-11 22:09:04,963 - WARNING - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFailed [442]: Connection refused or timeout when trying to access OctoPrint at https://octolinux:5003/api/settings
2020-03-11 22:09:04,965 - WARNING - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFailed [442]: Connection refused or timeout when trying to access OctoPrint at https://octolinux:5003/api/settings
2020-03-11 22:09:08,971 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-03-11 22:09:33,525 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.disconnect [331]: Connection with instance BlueLeader with url https://octolinux:5003/ stopped
2020-03-11 22:09:33,534 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/DiscoverOctoPrintAction.qml:595: TypeError: Cannot call method 'getId' of undefined
2020-03-11 22:09:33,539 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-11 22:09:33,541 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device BlueLeader already added
2020-03-11 22:09:33,543 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [310]: Connection with instance BlueLeader with url http://octolinux:5003/ started
2020-03-11 22:09:33,582 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device BlueLeader already added
2020-03-11 22:09:33,583 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [719]: Received an unexpected returncode: 403
2020-03-11 22:09:33,584 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x60000705c168>
2020-03-11 22:09:33,584 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:09:33,585 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x60000703b5e8>
2020-03-11 22:09:33,585 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:09:33,599 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x6000070393c8>
2020-03-11 22:09:33,599 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:09:34,123 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [263]: Trying to access OctoPrint instance at http://octolinux:5003/ with the provided API key.
2020-03-11 22:09:42,649 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [263]: Trying to access OctoPrint instance at http://octolinux:5003/ with the provided API key.
2020-03-11 22:09:42,725 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [506]: API key accepted by OctoPrint.
2020-03-11 22:09:43,972 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-03-11 22:09:58,116 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [263]: Trying to access OctoPrint instance at http://octolinux:5003/ with the provided API key.
2020-03-11 22:09:58,189 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [506]: API key accepted by OctoPrint.
2020-03-11 22:10:07,616 - DEBUG - [MainThread] LinearAdvanceSettingPlugin.LinearAdvanceSettingPlugin._filterGcode [109]: No used extruders specify a linear advance factor
2020-03-11 22:10:07,854 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.requestWrite [420]: Tried starting a print, but current state is offline
2020-03-11 22:10:07,886 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._processRequest [308]: Request [973bc9961a5f41679b760f0cd139e86d] started
2020-03-11 22:10:07,889 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-11 22:10:08,143 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestFinished [369]: Request [973bc9961a5f41679b760f0cd139e86d] finished.
2020-03-11 22:10:08,149 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-11 22:10:08,154 - INFO - [MainThread] SliceInfoPlugin.SliceInfo._onRequestFinished [275]: SliceInfo sent successfully
2020-03-11 22:10:09,509 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-03-11 22:10:15,218 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.disconnect [331]: Connection with instance BlueLeader with url http://octolinux:5003/ stopped
2020-03-11 22:10:15,228 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-11 22:10:15,231 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device BlueLeader already added
2020-03-11 22:10:15,232 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [310]: Connection with instance BlueLeader with url http://octolinux:5003/ started
2020-03-11 22:10:15,237 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-11 22:10:15,242 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/Resources/qml/UM/Dialog.qml:86:13: QML Loader: Binding loop detected for property "active"
2020-03-11 22:10:15,285 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device BlueLeader already added
2020-03-11 22:10:15,286 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [719]: Received an unexpected returncode: 403
2020-03-11 22:10:15,287 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x600007085f28>
2020-03-11 22:10:15,287 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:10:15,288 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x6000070860e8>
2020-03-11 22:10:15,288 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:10:15,311 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x6000073b7188>
2020-03-11 22:10:15,311 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:10:15,834 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [263]: Trying to access OctoPrint instance at http://octolinux:5003/ with the provided API key.
2020-03-11 22:10:25,094 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x60000707dc18>
2020-03-11 22:10:25,095 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:10:25,105 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [719]: Received an unexpected returncode: 403
2020-03-11 22:10:25,107 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x60000705c1d8>
2020-03-11 22:10:25,108 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:10:31,378 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.disconnect [331]: Connection with instance BlueLeader with url http://octolinux:5003/ stopped
2020-03-11 22:10:31,390 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/DiscoverOctoPrintAction.qml:595: TypeError: Cannot call method 'getId' of undefined
2020-03-11 22:10:31,396 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-11 22:10:31,399 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device BlueLeader already added
2020-03-11 22:10:31,400 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [310]: Connection with instance BlueLeader with url http://octolinux:5003/ started
2020-03-11 22:10:31,449 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device BlueLeader already added
2020-03-11 22:10:31,450 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [719]: Received an unexpected returncode: 403
2020-03-11 22:10:31,451 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x6000070b7578>
2020-03-11 22:10:31,452 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:10:31,453 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x6000070b6628>
2020-03-11 22:10:31,454 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:10:31,467 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x6000070333b8>
2020-03-11 22:10:31,467 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:10:31,983 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [263]: Trying to access OctoPrint instance at http://octolinux:5003/ with the provided API key.
2020-03-11 22:10:41,181 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-03-11 22:10:41,220 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [719]: Received an unexpected returncode: 403
2020-03-11 22:10:41,222 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x60000701fdc8>
2020-03-11 22:10:41,222 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:10:41,237 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [956]: OctoPrintOutputDevice got an error while accessing <built-in method toString of QUrl object at 0x60000705d588>
2020-03-11 22:10:41,237 - ERROR - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [957]: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<title>403 Forbidden</title>
<h1>Forbidden</h1>
<p>You don't have the permission to access the requested resource. It is either read-protected or not readable by the server.</p>

2020-03-11 22:10:41,721 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [263]: Trying to access OctoPrint instance at http://octolinux:5003/ with the provided API key.
2020-03-11 22:10:41,798 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [506]: API key accepted by OctoPrint.
2020-03-11 22:10:49,060 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-11 22:10:49,078 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device BlueLeader already added
2020-03-11 22:10:49,079 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [310]: Connection with instance BlueLeader with url http://octolinux:5003/ started
2020-03-11 22:10:49,084 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-11 22:10:49,085 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [310]: Connection with instance BlueLeader with url http://octolinux:5003/ started
2020-03-11 22:10:49,134 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device BlueLeader already added
2020-03-11 22:10:49,137 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device BlueLeader already added
2020-03-11 22:10:49,140 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device BlueLeader already added
2020-03-11 22:10:49,185 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [813]: Unusable stream url received:  http://octolinux:8080/?action=stream
2020-03-11 22:10:49,185 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [816]: Set OctoPrint camera url to 
2020-03-11 22:10:51,433 - WARNING - [MainThread] UM.OutputDevice.OutputDeviceManager.removeOutputDevice [179]: Could not find output device with id BlueLeader to remove
2020-03-11 22:10:51,436 - WARNING - [MainThread] UM.OutputDevice.OutputDeviceManager.removeOutputDevice [179]: Could not find output device with id BlueLeader to remove
2020-03-11 22:10:52,294 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-11 22:10:52,307 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device BlueLeader already added
2020-03-11 22:10:52,310 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device BlueLeader already added
2020-03-11 22:10:52,313 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device BlueLeader already added
2020-03-11 22:10:52,315 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [310]: Connection with instance BlueLeader with url http://octolinux:5003/ started
2020-03-11 22:10:52,319 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-11 22:10:52,321 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [310]: Connection with instance BlueLeader with url http://octolinux:5003/ started
2020-03-11 22:10:52,355 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device BlueLeader already added
2020-03-11 22:10:52,358 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device BlueLeader already added
2020-03-11 22:10:52,363 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device BlueLeader already added
2020-03-11 22:10:52,365 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device BlueLeader already added
2020-03-11 22:10:52,368 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device BlueLeader already added
2020-03-11 22:10:52,392 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [813]: Unusable stream url received:  http://octolinux:8080/?action=stream
2020-03-11 22:10:52,392 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [816]: Set OctoPrint camera url to 
2020-03-11 22:10:58,006 - DEBUG - [MainThread] LinearAdvanceSettingPlugin.LinearAdvanceSettingPlugin._filterGcode [109]: No used extruders specify a linear advance factor
2020-03-11 22:10:58,212 - DEBUG - [MainThread] UM.Controller.setActiveStage [149]: Setting active stage to MonitorStage
2020-03-11 22:10:58,228 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/SidebarGUIPlugin/SidebarGUIPlugin/resources/qml/MonitorStageMenu.qml:23: TypeError: Cannot read property 'children' of undefined
2020-03-11 22:10:58,291 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:211: Error: Cannot assign [undefined] to QString
2020-03-11 22:10:58,411 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._processRequest [308]: Request [c2cda026aba4491d8e732e075d6c3393] started
2020-03-11 22:10:58,415 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-11 22:10:58,882 - INFO - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestFinished [369]: Request [c2cda026aba4491d8e732e075d6c3393] finished.
2020-03-11 22:10:58,887 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._processNextRequestsInQueue [279]: No more requests to process, stop
2020-03-11 22:10:58,887 - INFO - [MainThread] SliceInfoPlugin.SliceInfo._onRequestFinished [275]: SliceInfo sent successfully
2020-03-11 22:10:58,993 - DEBUG - [MainThread] cura.AutoSave._onTimeout [60]: Autosaving preferences, instances and profiles
2020-03-11 22:11:03,588 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-03-11 22:11:07,864 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onUploadFinished [1012]: Resource created on OctoPrint instance: http://octolinux:5003/api/files/local/WDI3P_head_4p2.gcode
2020-03-11 22:11:08,479 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [886]: Still waiting for PrintTimeGenius analysis of files/local/WDI3P_head_4p2.gcode
2020-03-11 22:11:10,488 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [886]: Still waiting for PrintTimeGenius analysis of files/local/WDI3P_head_4p2.gcode
2020-03-11 22:11:12,487 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [886]: Still waiting for PrintTimeGenius analysis of files/local/WDI3P_head_4p2.gcode
2020-03-11 22:11:14,508 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [874]: PrintTimeGenius analysis of files/local/WDI3P_head_4p2.gcode is done
2020-03-11 22:11:14,521 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-03-11 22:11:14,525 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-03-11 22:11:14,632 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [891]: OctoPrint file command accepted
2020-03-11 22:17:19,415 - DEBUG - [MainThread] UM.Controller.setActiveStage [149]: Setting active stage to PrepareStage
2020-03-11 22:17:19,475 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2020-03-11 22:17:19,483 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/SidebarGUIPlugin/SidebarGUIPlugin/resources/qml/SidebarFooter.qml:45: TypeError: Type error
2020-03-11 22:17:19,544 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-11 22:17:19,549 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-11 22:17:19,680 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/SidebarGUIPlugin/SidebarGUIPlugin/resources/qml/ProfileSelector44.qml:38:5: QML Button: Binding loop detected for property "implicitWidth"
2020-03-11 22:17:19,704 - DEBUG - [MainThread] cura.CuraApplication.log [1636]: SidebarGUIPlugin patching interface for Cura 4.5 and newer
2020-03-11 22:17:19,710 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-11 22:17:19,713 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/ActionButton.qml:79:9: QML Label: Binding loop detected for property "width"
2020-03-11 22:17:19,755 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:79: ReferenceError: stop is not defined
2020-03-11 22:17:19,759 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:63: TypeError: Cannot read property of null
2020-03-11 22:17:19,761 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:91: TypeError: Cannot read property of null
2020-03-11 22:17:19,763 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:102: TypeError: Cannot read property of null
2020-03-11 22:17:19,766 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:103: TypeError: Cannot read property of null
2020-03-11 22:17:19,768 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:139: TypeError: Cannot read property of null
2020-03-11 22:17:19,770 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:140: TypeError: Cannot read property of null
2020-03-11 22:17:19,773 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:120: TypeError: Cannot read property of null
2020-03-11 22:17:19,775 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:122: TypeError: Cannot read property of null
2020-03-11 22:17:19,778 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-03-11 22:17:19,780 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:36: TypeError: Cannot read property of null
2020-03-11 22:17:19,782 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:37: TypeError: Cannot read property of null
2020-03-11 22:17:19,784 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:49: TypeError: Cannot read property of null
2020-03-11 22:17:19,786 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:59: TypeError: Cannot read property of null
2020-03-11 22:17:19,789 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:61: TypeError: Cannot read property of null
2020-03-11 22:17:19,791 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/OutputDeviceHeader.qml:63: TypeError: Cannot read property of null
2020-03-11 22:17:19,793 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ExtruderBox.qml:20: TypeError: Cannot read property of null
2020-03-11 22:17:19,795 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:29: TypeError: Cannot read property of null
2020-03-11 22:17:19,797 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:30: TypeError: Cannot read property of null
2020-03-11 22:17:19,800 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:40: TypeError: Cannot read property of null
2020-03-11 22:17:19,802 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:73: TypeError: Cannot read property of null
2020-03-11 22:17:19,804 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:135: TypeError: Cannot read property of null
2020-03-11 22:17:19,806 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:246: TypeError: Cannot read property of null
2020-03-11 22:17:19,808 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:247: TypeError: Cannot read property of null
2020-03-11 22:17:19,811 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:173: TypeError: Cannot read property of null
2020-03-11 22:17:19,813 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:175: TypeError: Cannot read property of null
2020-03-11 22:17:19,815 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:190: TypeError: Cannot read property of null
2020-03-11 22:17:19,817 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:193: TypeError: Cannot read property of null
2020-03-11 22:17:19,819 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:60: TypeError: Cannot read property of null
2020-03-11 22:17:19,822 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:248: TypeError: Cannot read property of null
2020-03-11 22:17:19,824 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:294: TypeError: Cannot read property of null
2020-03-11 22:17:19,827 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:26: TypeError: Cannot read property of null
2020-03-11 22:17:19,829 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:27: TypeError: Cannot read property of null
2020-03-11 22:17:19,833 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:388: TypeError: Cannot read property of null
2020-03-11 22:17:19,835 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:390: TypeError: Cannot read property of null
2020-03-11 22:17:19,837 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/ManualPrinterControl.qml:391: TypeError: Cannot read property of null
2020-03-11 22:17:19,839 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:26: TypeError: Cannot read property of null
2020-03-11 22:17:19,842 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorSection.qml:27: TypeError: Cannot read property of null
2020-03-11 22:17:19,844 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:24: TypeError: Cannot read property of null
2020-03-11 22:17:19,846 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:30: TypeError: Cannot read property of null
2020-03-11 22:17:19,849 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:39: TypeError: Cannot read property of null
2020-03-11 22:17:19,852 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:24: TypeError: Cannot read property of null
2020-03-11 22:17:19,854 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:30: TypeError: Cannot read property of null
2020-03-11 22:17:19,856 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:39: TypeError: Cannot read property of null
2020-03-11 22:17:19,858 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:24: TypeError: Cannot read property of null
2020-03-11 22:17:19,860 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:30: TypeError: Cannot read property of null
2020-03-11 22:17:19,863 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/MonitorItem.qml:39: TypeError: Cannot read property of null
2020-03-11 22:17:19,865 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupTooltip.qml:67: TypeError: Cannot read property of null
2020-03-11 22:17:19,867 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupTooltip.qml:69: TypeError: Cannot read property of null
2020-03-11 22:17:19,869 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrintSetupTooltip.qml:71: TypeError: Cannot read property of null
2020-03-11 22:17:19,871 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/OctoPrintPlugin/OctoPrintPlugin/qml/MonitorItem4x.qml:150: TypeError: Cannot read property of null
2020-03-11 22:17:19,873 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/RoundedRectangle.qml:68: TypeError: Cannot read property of null
2020-03-11 22:17:19,876 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:166: TypeError: Cannot read property of null
2020-03-11 22:17:19,878 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:167: TypeError: Cannot read property of null
2020-03-11 22:17:19,880 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:178: TypeError: Cannot read property of null
2020-03-11 22:17:19,882 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:231: TypeError: Cannot read property of null
2020-03-11 22:17:19,885 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/MonitorButton.qml:241: TypeError: Cannot read property of null
2020-03-11 22:17:28,595 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.disconnect [331]: Connection with instance BlueLeader with url http://octolinux:5003/ stopped
2020-03-11 22:17:28,608 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-11 22:17:28,610 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device BlueLeader already added
2020-03-11 22:17:28,611 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice.connect [310]: Connection with instance BlueLeader with url http://octolinux:5003/ started
2020-03-11 22:17:28,616 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [305]: Creating network manager
2020-03-11 22:17:28,622 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/Resources/qml/UM/Dialog.qml:86:13: QML Loader: Binding loop detected for property "active"
2020-03-11 22:17:28,673 - INFO - [MainThread] UM.OutputDevice.OutputDeviceManager.addOutputDevice [156]: Output Device BlueLeader already added
2020-03-11 22:17:28,690 - WARNING - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [813]: Unusable stream url received:  http://octolinux:8080/?action=stream
2020-03-11 22:17:28,690 - DEBUG - [MainThread] OctoPrintPlugin.OctoPrintOutputDevice._onRequestFinished [816]: Set OctoPrint camera url to 
2020-03-11 22:17:29,193 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction.testApiKey [263]: Trying to access OctoPrint instance at http://octolinux:5003/ with the provided API key.
2020-03-11 22:17:29,268 - DEBUG - [MainThread] OctoPrintPlugin.DiscoverOctoPrintAction._onRequestFinished [506]: API key accepted by OctoPrint.
2020-03-11 22:18:40,923 - DEBUG - [MainThread] UM.Controller.setActiveStage [149]: Setting active stage to MonitorStage
2020-03-11 22:18:40,945 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Users/nsanders/Library/Application Support/cura/4.5/plugins/SidebarGUIPlugin/SidebarGUIPlugin/resources/qml/MonitorStageMenu.qml:23: TypeError: Cannot read property 'children' of undefined
2020-03-11 22:18:40,987 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [398]: file:///Applications/Ultimaker Cura 3.app/Contents/MacOS/resources/qml/PrinterOutput/HeatedBedBox.qml:211: Error: Cannot assign [undefined] to QString