2024-05-28 20:28:21,880 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2024-05-28 20:28:21,882 - octoprint.server - INFO - --- Log roll over detected --------------------------------------------------- 2024-05-28 20:28:21,882 - octoprint.server - INFO - OctoPrint 1.10.1 2024-05-28 20:28:21,883 - octoprint.plugin.core - INFO - 20 plugin(s) registered with the system: | Achievements Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/achievements | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/appkeys | Backup & Restore (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/backup | Classic Webcam (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/classicwebcam | Core Wizard (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/corewizard | Discovery (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/discovery | Error Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/errortracking | Event Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/eventmanager | File Check (2024.3.27) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_file_check | Firmware Check (2021.10.11) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmware_check | GCode Viewer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/gcodeviewer | Logging (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/logging | Pi Support Plugin (2023.10.10) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/pluginmanager | Software Update (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/softwareupdate | Virtual Printer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2024-05-28 20:28:21,889 - octoprint.environment - INFO - Detected environment is Python 3.9.2 under Linux (linux). Details: | hardware: | cores: 4 | freq: 1800.0 | ram: 1909604352 | os: | bits: 32 | id: linux | platform: linux | plugins: | pi_support: | model: Raspberry Pi 4 Model B Rev 1.5 | octopi_camera_stack: camera-streamer | octopi_version: 1.0.0 | octopiuptodate_build: 1.0.0-1.10.1-20240514102430 | octopiuptodate_build_short: 2024.05.14.102430 | throttle_check_enabled: true | throttle_check_functional: true | throttle_state: '0x0' | python: | pip: '22.3' | version: 3.9.2 | virtualenv: /home/pi/oprint 2024-05-28 20:28:21,889 - octoprint.server - INFO - ------------------------------------------------------------------------------ 2024-05-28 20:28:22,070 - octoprint.server - INFO - Intermediary server shut down 2024-05-28 20:28:22,074 - octoprint.events - INFO - Processing startup event, this is our first event 2024-05-28 20:28:22,074 - octoprint.events - INFO - Adding 1 events to queue that were held back before startup event 2024-05-28 20:28:22,075 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue... 2024-05-28 20:28:22,082 - octoprint.server - INFO - Starting autorefresh of serial port list 2024-05-28 20:28:22,084 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue 2024-05-28 20:28:22,088 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder... 2024-05-28 20:28:22,089 - octoprint.server.util.watchdog - INFO - ... initial scan done. 2024-05-28 20:28:22,096 - octoprint.server - INFO - Serial port list was updated, refreshing the port list in the frontend 2024-05-28 20:28:22,121 - octoprint.plugins.achievements - INFO - New achievement unlocked: The Wizard! 2024-05-28 20:28:22,989 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on OctoPrint._http._tcp.local.' for _http._tcp.local. 2024-05-28 20:28:23,823 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on OctoPrint._octoprint._tcp.local.' for _octoprint._tcp.local. 2024-05-28 20:28:23,831 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance on OctoPrint for SSDP 2024-05-28 20:28:23,848 - octoprint.server - INFO - Listening on http://127.0.0.1:5000 2024-05-28 20:28:24,306 - octoprint.plugins.announcements - INFO - Loaded channel _important from https://octoprint.org/feeds/important.xml in 0.41s 2024-05-28 20:28:24,503 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from https://plugins.octoprint.org/plugins.json 2024-05-28 20:28:24,873 - octoprint.plugins.announcements - INFO - Loaded channel _releases from https://octoprint.org/feeds/releases.xml in 0.47s 2024-05-28 20:28:24,893 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2024-05-28 20:28:24,894 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2024-05-28 20:28:24,894 - octoprint.util.pip - INFO - ==> pip ok -> yes 2024-05-28 20:28:24,909 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 54.0GB. That is considered sufficient for updating. 2024-05-28 20:28:24,910 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json 2024-05-28 20:28:25,754 - octoprint.plugins.announcements - INFO - Loaded channel _blog from https://octoprint.org/feeds/octoblog.xml in 0.61s 2024-05-28 20:28:26,283 - octoprint.plugins.pluginmanager - INFO - Loaded plugin notices data from https://plugins.octoprint.org/notices.json 2024-05-28 20:28:26,293 - octoprint.plugins.announcements - INFO - Loaded channel _plugins from https://plugins.octoprint.org/feed.xml in 0.39s 2024-05-28 20:28:26,704 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2024-05-28 20:28:26,705 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2024-05-28 20:28:26,705 - octoprint.util.pip - INFO - ==> pip ok -> yes 2024-05-28 20:28:26,724 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk 2024-05-28 20:28:26,769 - octoprint.plugins.announcements - INFO - Loaded channel _octopi from https://octoprint.org/feeds/octopi.xml in 0.37s 2024-05-28 20:28:36,706 - octoprint.server.util.flask.PreemptiveCache - INFO - Adding entry for / and {'path': '/', 'base_url': 'http://192.168.86.26/', 'query_string': 'l10n=en', '_timestamp': 1716942516.7063625, '_count': 1} 2024-05-28 20:28:46,510 - octoprint.server.util.sockjs - INFO - New connection from client: 192.168.86.47 2024-05-28 20:29:04,771 - octoprint.access.users - INFO - Logged in user: will 2024-05-28 20:29:04,773 - octoprint.server.api - INFO - Actively logging in user will from 192.168.86.47 2024-05-28 20:29:04,842 - octoprint.server.util.sockjs - INFO - User will logged in on the socket from client 192.168.86.47 2024-05-28 20:29:17,214 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 58, 'printer_state': 'OFFLINE'} 2024-05-28 20:29:17,586 - octoprint.plugins.tracking - INFO - Sent tracking event pong, payload: {'version': '1.10.1', 'os': 'linux', 'bits': 32, 'python': '3.9.2', 'pip': '22.3', 'cores': 4, 'freq': 1800.0, 'ram': 1909604352, 'pi_model': 'Raspberry Pi 4 Model B Rev 1.5', 'octopi_version': '1.0.0', 'octopiuptodate_build': '1.0.0-1.10.1-20240514102430', 'plugins': '', 'achievements': 'the_wizard'} 2024-05-28 20:29:18,051 - octoprint.plugins.tracking - INFO - Sent tracking event startup, payload: {'version': '1.10.1', 'os': 'linux', 'bits': 32, 'python': '3.9.2', 'pip': '22.3', 'cores': 4, 'freq': 1800.0, 'ram': 1909604352, 'pi_model': 'Raspberry Pi 4 Model B Rev 1.5', 'octopi_version': '1.0.0', 'octopiuptodate_build': '1.0.0-1.10.1-20240514102430'} 2024-05-28 20:29:33,583 - octoprint.server.util.flask - INFO - Passively logging in user will from 192.168.86.47 2024-05-28 20:29:33,584 - octoprint.access.users - INFO - Logged in user: will 2024-05-28 20:29:34,287 - octoprint.server.util.sockjs - INFO - Client connection closed: 192.168.86.47 2024-05-28 20:29:34,828 - octoprint.server.util.sockjs - INFO - New connection from client: 192.168.86.47 2024-05-28 20:29:34,914 - octoprint.server.util.flask - INFO - Passively logging in user will from 192.168.86.47 2024-05-28 20:29:34,915 - octoprint.access.users - INFO - Logged in user: will 2024-05-28 20:29:35,386 - octoprint.server.util.sockjs - INFO - User will logged in on the socket from client 192.168.86.47 2024-05-28 20:29:36,328 - octoprint.plugins.tracking - INFO - Sent tracking event webui_load, payload: {'browser_name': 'Chrome', 'browser_version': '124.0.0.0', 'os_name': 'Windows', 'os_version': '10'} 2024-05-28 20:43:21,881 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2024-05-28 20:44:17,189 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 958, 'printer_state': 'OFFLINE'} 2024-05-28 20:58:21,882 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2024-05-28 20:59:17,182 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 1858, 'printer_state': 'OFFLINE'} 2024-05-28 21:13:21,884 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2024-05-28 21:14:17,196 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 2758, 'printer_state': 'OFFLINE'} 2024-05-28 21:28:21,885 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2024-05-28 21:29:17,218 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 3658, 'printer_state': 'OFFLINE'} 2024-05-28 21:43:21,886 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2024-05-28 21:44:17,190 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 4558, 'printer_state': 'OFFLINE'} 2024-05-28 21:58:21,887 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2024-05-28 21:59:17,199 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 5458, 'printer_state': 'OFFLINE'} 2024-05-28 22:07:29,210 - octoprint.server.util.sockjs - INFO - Client connection closed: 192.168.86.47 2024-05-28 22:07:36,895 - octoprint.startup - INFO - ****************************************************************************** 2024-05-28 22:07:36,897 - octoprint.startup - INFO - Starting OctoPrint 1.10.1 2024-05-28 22:07:36,908 - octoprint.startup - INFO - ****************************************************************************** 2024-05-28 22:07:43,369 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: offline 2024-05-28 22:07:43,370 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 8.8.8.8:53 is not working 2024-05-28 22:07:43,370 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is not working 2024-05-28 22:07:43,384 - octoprint.startup - INFO - We don't appear to be online, not fetching plugin blacklist 2024-05-28 22:07:43,397 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2024-05-28 22:07:46,445 - octoprint.startup - INFO - Added settings overlay from plugin octodashcompanion 2024-05-28 22:07:46,453 - octoprint.plugin.core - INFO - Found 24 plugin(s) providing 24 mixin implementations, 61 hook handlers 2024-05-28 22:07:46,458 - octoprint.server.heartbeat - INFO - Starting server heartbeat, 900.0s interval 2024-05-28 22:07:46,667 - octoprint.server - INFO - Intermediary server started 2024-05-28 22:07:46,688 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/pi/.octoprint/uploads... 2024-05-28 22:07:46,689 - octoprint.filemanager.storage - INFO - ... file metadata for /home/pi/.octoprint/uploads initialized successfully. 2024-05-28 22:07:46,694 - octoprint.server - INFO - Added new permission from plugin achievements: PLUGIN_ACHIEVEMENTS_VIEW (needs: "Need(method='role', value='plugin_achievements_view')") 2024-05-28 22:07:46,694 - octoprint.server - INFO - Added new permission from plugin achievements: PLUGIN_ACHIEVEMENTS_RESET (needs: "Need(method='role', value='plugin_achievements_reset')") 2024-05-28 22:07:46,695 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_SHOW (needs: "Need(method='role', value='plugin_action_command_notification_show')") 2024-05-28 22:07:46,695 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_CLEAR (needs: "Need(method='role', value='plugin_action_command_notification_clear')") 2024-05-28 22:07:46,695 - octoprint.server - INFO - Added new permission from plugin action_command_prompt: PLUGIN_ACTION_COMMAND_PROMPT_INTERACT (needs: "Need(method='role', value='plugin_action_command_prompt_interact')") 2024-05-28 22:07:46,696 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_READ (needs: "Need(method='role', value='plugin_announcements_read')") 2024-05-28 22:07:46,696 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_MANAGE (needs: "Need(method='role', value='plugin_announcements_manage'), Need(method='role', value='plugin_announcements_read')") 2024-05-28 22:07:46,703 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_ADMIN (needs: "Need(method='role', value='plugin_appkeys_admin')") 2024-05-28 22:07:46,704 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_GRANT (needs: "Need(method='role', value='plugin_appkeys_user')") 2024-05-28 22:07:46,706 - octoprint.server - INFO - Added new permission from plugin backup: PLUGIN_BACKUP_CREATE (needs: "Need(method='role', value='plugin_backup_create')") 2024-05-28 22:07:46,707 - octoprint.server - INFO - Added new permission from plugin file_check: PLUGIN_FILE_CHECK_RUN (needs: "Need(method='role', value='plugin_file_check_run')") 2024-05-28 22:07:46,709 - octoprint.server - INFO - Added new permission from plugin firmware_check: PLUGIN_FIRMWARE_CHECK_DISPLAY (needs: "Need(method='role', value='plugin_firmware_check_display')") 2024-05-28 22:07:46,710 - octoprint.server - INFO - Added new permission from plugin logging: PLUGIN_LOGGING_MANAGE (needs: "Need(method='role', value='plugin_logging_manage')") 2024-05-28 22:07:46,711 - octoprint.server - INFO - Added new permission from plugin octodashcompanion: PLUGIN_OCTODASHCOMPANION_MANAGEBACKUPS (needs: "Need(method='role', value='plugin_octodashcompanion_admin')") 2024-05-28 22:07:46,713 - octoprint.server - INFO - Added new permission from plugin pi_support: PLUGIN_PI_SUPPORT_STATUS (needs: "Need(method='role', value='plugin_pi_support_check')") 2024-05-28 22:07:46,715 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_LIST (needs: "Need(method='role', value='plugin_pluginmanager_list')") 2024-05-28 22:07:46,716 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_MANAGE (needs: "Need(method='role', value='plugin_pluginmanager_manage')") 2024-05-28 22:07:46,717 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_INSTALL (needs: "Need(method='role', value='plugin_pluginmanager_install'), Need(method='role', value='plugin_pluginmanager_manage')") 2024-05-28 22:07:46,719 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CHECK (needs: "Need(method='role', value='plugin_softwareupdate_check')") 2024-05-28 22:07:46,720 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_UPDATE (needs: "Need(method='role', value='plugin_softwareupdate_update')") 2024-05-28 22:07:46,722 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CONFIGURE (needs: "Need(method='role', value='plugin_softwareupdate_configure')") 2024-05-28 22:07:46,736 - octoprint.printer.standard - INFO - Using print time estimator provided by PrintTimeGenius 2024-05-28 22:07:48,471 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2024-05-28 22:07:49,396 - octoprint.util.pip - INFO - Version of pip is 22.3 2024-05-28 22:07:49,402 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2024-05-28 22:07:49,403 - octoprint.util.pip - INFO - ==> pip ok -> yes 2024-05-28 22:07:49,431 - octoprint.plugins.achievements - INFO - Loading data from /home/pi/.octoprint/data/achievements/data.json 2024-05-28 22:07:49,435 - octoprint.plugins.achievements - INFO - Loading data for None from /home/pi/.octoprint/data/achievements/2024.json 2024-05-28 22:07:49,481 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk 2024-05-28 22:07:49,555 - octoprint.plugins.file_check - INFO - Native grep available: True 2024-05-28 22:07:49,589 - octoprint.plugin.core - INFO - Initialized 24 plugin implementation(s) 2024-05-28 22:07:49,627 - octoprint - INFO - Installing webcam compat overlay for configured default webcam 2024-05-28 22:07:49,629 - octoprint.plugin.core - INFO - 24 plugin(s) registered with the system: | Achievements Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/achievements | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/appkeys | Backup & Restore (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/backup | Classic Webcam (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/classicwebcam | Core Wizard (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/corewizard | Cura Thumbnails (1.0.2) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_ultimakerformatpackage | Discovery (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/discovery | DisplayLayerProgress Plugin (1.28.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_DisplayLayerProgress | Error Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/errortracking | Event Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/eventmanager | File Check (2024.3.27) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_file_check | Firmware Check (2021.10.11) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmware_check | GCode Viewer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/gcodeviewer | Logging (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/logging | OctoDash Companion (0.0.7) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_octodashcompanion | Pi Support Plugin (2023.10.10) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/pluginmanager | PrintTimeGenius Plugin (2.3.3) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_PrintTimeGenius | Software Update (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/softwareupdate | Virtual Printer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2024-05-28 22:07:49,671 - octoprint.environment - INFO - Detected environment is Python 3.9.2 under Linux (linux). Details: | hardware: | cores: 4 | freq: 1800.0 | ram: 1909604352 | os: | bits: 32 | id: linux | platform: linux | plugins: | pi_support: | model: Raspberry Pi 4 Model B Rev 1.5 | octopi_camera_stack: camera-streamer | octopi_version: 1.0.0 | octopiuptodate_build: 1.0.0-1.10.1-20240514102430 | octopiuptodate_build_short: 2024.05.14.102430 | throttle_check_enabled: true | throttle_check_functional: true | throttle_state: '0x0' | python: | pip: '22.3' | version: 3.9.2 | virtualenv: /home/pi/oprint 2024-05-28 22:07:49,691 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/webassets... 2024-05-28 22:07:49,693 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-cache... 2024-05-28 22:07:49,693 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-manifest.json... 2024-05-28 22:07:49,961 - octoprint.plugins.DisplayLayerProgress - WARNING - The Blueprint of this plugin is relying on the default implementation of is_blueprint_csrf_protected (newly added in OctoPrint 1.8.3), which in a future version will be switched from False to True for security reasons. Plugin authors should ensure they explicitly declare the CSRF protection status in their BlueprintPlugin mixin implementation. Recommendation is to enable CSRF protection and exempt views that must not use it with the octoprint.plugin.BlueprintPlugin.csrf_exempt decorator. 2024-05-28 22:07:49,961 - octoprint.server - WARNING - CSRF Protection for Blueprint of plugin DisplayLayerProgress is DISABLED 2024-05-28 22:07:49,965 - octoprint.plugins.octodashcompanion - WARNING - The Blueprint of this plugin is relying on the default implementation of is_blueprint_csrf_protected (newly added in OctoPrint 1.8.3), which in a future version will be switched from False to True for security reasons. Plugin authors should ensure they explicitly declare the CSRF protection status in their BlueprintPlugin mixin implementation. Recommendation is to enable CSRF protection and exempt views that must not use it with the octoprint.plugin.BlueprintPlugin.csrf_exempt decorator. 2024-05-28 22:07:49,966 - octoprint.server - WARNING - CSRF Protection for Blueprint of plugin octodashcompanion is DISABLED 2024-05-28 22:07:50,287 - octoprint.server - INFO - Shutting down intermediary server... 2024-05-28 22:07:50,294 - octoprint.server - INFO - Intermediary server shut down 2024-05-28 22:07:50,297 - octoprint.events - INFO - Processing startup event, this is our first event 2024-05-28 22:07:50,297 - octoprint.events - INFO - Adding 1 events to queue that were held back before startup event 2024-05-28 22:07:50,298 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue... 2024-05-28 22:07:50,305 - octoprint.server - INFO - Starting autorefresh of serial port list 2024-05-28 22:07:50,307 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue 2024-05-28 22:07:50,312 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder... 2024-05-28 22:07:50,315 - octoprint.server - INFO - Serial port list was updated, refreshing the port list in the frontend 2024-05-28 22:07:50,319 - octoprint.server.util.watchdog - INFO - ... initial scan done. 2024-05-28 22:07:51,141 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on OctoPrint._http._tcp.local.' for _http._tcp.local. 2024-05-28 22:07:51,956 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on OctoPrint._octoprint._tcp.local.' for _octoprint._tcp.local. 2024-05-28 22:07:51,965 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance on OctoPrint for SSDP 2024-05-28 22:07:51,989 - octoprint.server - INFO - Listening on http://127.0.0.1:5000 2024-05-28 22:07:52,062 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2024-05-28 22:07:52,557 - octoprint.server.util.sockjs - INFO - New connection from client: 192.168.86.47 2024-05-28 22:07:52,712 - octoprint.server.util.flask - INFO - Passively logging in user will from 192.168.86.47 2024-05-28 22:07:52,713 - octoprint.access.users - INFO - Logged in user: will 2024-05-28 22:07:52,932 - octoprint.server.util.sockjs - INFO - User will logged in on the socket from client 192.168.86.47 2024-05-28 22:07:53,158 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2024-05-28 22:07:53,206 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2024-05-28 22:07:53,207 - octoprint.util.pip - INFO - ==> pip ok -> yes 2024-05-28 22:07:53,268 - octoprint.plugins.softwareupdate - INFO - Not fetching check overlays, we are offline 2024-05-28 22:07:53,293 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 53.4GB. That is considered sufficient for updating. 2024-05-28 22:07:53,315 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2024-05-28 22:07:53,316 - octoprint.server.api.settings - ERROR - Could not load settings for plugin OctoDash Companion (0.0.7) Traceback (most recent call last): File "/home/pi/oprint/lib/python3.9/site-packages/octoprint/server/api/settings.py", line 451, in _get_plugin_settings result = plugin.on_settings_load() File "/home/pi/oprint/lib/python3.9/site-packages/octoprint/util/__init__.py", line 1686, in wrapper return f(*args, **kwargs) File "/home/pi/oprint/lib/python3.9/site-packages/octoprint_octodashcompanion/__init__.py", line 45, in on_settings_load with open(self.config_file) as file: FileNotFoundError: [Errno 2] No such file or directory: '/home/pi/.config/octodash/config.json' 2024-05-28 22:07:53,425 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity changed from offline to online 2024-05-28 22:07:53,692 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2024-05-28 22:07:54,325 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2024-05-28 22:07:54,326 - octoprint.server.api.settings - ERROR - Could not load settings for plugin OctoDash Companion (0.0.7) Traceback (most recent call last): File "/home/pi/oprint/lib/python3.9/site-packages/octoprint/server/api/settings.py", line 451, in _get_plugin_settings result = plugin.on_settings_load() File "/home/pi/oprint/lib/python3.9/site-packages/octoprint/util/__init__.py", line 1686, in wrapper return f(*args, **kwargs) File "/home/pi/oprint/lib/python3.9/site-packages/octoprint_octodashcompanion/__init__.py", line 45, in on_settings_load with open(self.config_file) as file: FileNotFoundError: [Errno 2] No such file or directory: '/home/pi/.config/octodash/config.json' 2024-05-28 22:07:55,007 - octoprint.plugins.pluginmanager - INFO - Loaded plugin notices data from https://plugins.octoprint.org/notices.json 2024-05-28 22:07:55,504 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2024-05-28 22:07:55,506 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2024-05-28 22:07:55,506 - octoprint.util.pip - INFO - ==> pip ok -> yes 2024-05-28 22:07:55,586 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2024-05-28 22:07:55,739 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk 2024-05-28 22:07:56,062 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'http://192.168.86.26/', 'path': '/', 'query_string': 'l10n=en'} 2024-05-28 22:07:56,297 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 10, 'printer_state': 'OFFLINE'} 2024-05-28 22:07:56,597 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2024-05-28 22:07:56,740 - octoprint.plugins.tracking - INFO - Sent tracking event pong, payload: {'version': '1.10.1', 'os': 'linux', 'bits': 32, 'python': '3.9.2', 'pip': '22.3', 'cores': 4, 'freq': 1800.0, 'ram': 1909604352, 'pi_model': 'Raspberry Pi 4 Model B Rev 1.5', 'octopi_version': '1.0.0', 'octopiuptodate_build': '1.0.0-1.10.1-20240514102430', 'plugins': 'ultimakerformatpackage:1.0.2,printtimegenius:2.3.3,octodashcompanion:0.0.7,displaylayerprogress:1.28.0', 'achievements': 'the_wizard'} 2024-05-28 22:07:57,141 - octoprint.plugins.tracking - INFO - Sent tracking event startup, payload: {'version': '1.10.1', 'os': 'linux', 'bits': 32, 'python': '3.9.2', 'pip': '22.3', 'cores': 4, 'freq': 1800.0, 'ram': 1909604352, 'pi_model': 'Raspberry Pi 4 Model B Rev 1.5', 'octopi_version': '1.0.0', 'octopiuptodate_build': '1.0.0-1.10.1-20240514102430'} 2024-05-28 22:08:02,900 - octoprint.server.preemptive_cache - INFO - ... done in 6.84s 2024-05-28 22:08:25,022 - octoprint.server.util.flask - INFO - Passively logging in user will from 192.168.86.47 2024-05-28 22:08:25,023 - octoprint.access.users - INFO - Logged in user: will 2024-05-28 22:08:25,302 - octoprint.server.util.sockjs - INFO - Client connection closed: 192.168.86.47 2024-05-28 22:08:26,494 - octoprint.server.util.sockjs - INFO - New connection from client: 192.168.86.47 2024-05-28 22:08:26,562 - octoprint.server.util.flask - INFO - Passively logging in user will from 192.168.86.47 2024-05-28 22:08:26,562 - octoprint.access.users - INFO - Logged in user: will 2024-05-28 22:08:26,654 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2024-05-28 22:08:26,655 - octoprint.server.api.settings - ERROR - Could not load settings for plugin OctoDash Companion (0.0.7) Traceback (most recent call last): File "/home/pi/oprint/lib/python3.9/site-packages/octoprint/server/api/settings.py", line 451, in _get_plugin_settings result = plugin.on_settings_load() File "/home/pi/oprint/lib/python3.9/site-packages/octoprint/util/__init__.py", line 1686, in wrapper return f(*args, **kwargs) File "/home/pi/oprint/lib/python3.9/site-packages/octoprint_octodashcompanion/__init__.py", line 45, in on_settings_load with open(self.config_file) as file: FileNotFoundError: [Errno 2] No such file or directory: '/home/pi/.config/octodash/config.json' 2024-05-28 22:08:26,762 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2024-05-28 22:08:26,763 - octoprint.server.api.settings - ERROR - Could not load settings for plugin OctoDash Companion (0.0.7) Traceback (most recent call last): File "/home/pi/oprint/lib/python3.9/site-packages/octoprint/server/api/settings.py", line 451, in _get_plugin_settings result = plugin.on_settings_load() File "/home/pi/oprint/lib/python3.9/site-packages/octoprint/util/__init__.py", line 1686, in wrapper return f(*args, **kwargs) File "/home/pi/oprint/lib/python3.9/site-packages/octoprint_octodashcompanion/__init__.py", line 45, in on_settings_load with open(self.config_file) as file: FileNotFoundError: [Errno 2] No such file or directory: '/home/pi/.config/octodash/config.json' 2024-05-28 22:08:27,059 - octoprint.server.util.sockjs - INFO - User will logged in on the socket from client 192.168.86.47 2024-05-28 22:08:28,141 - octoprint.plugins.tracking - INFO - Sent tracking event webui_load, payload: {'browser_name': 'Chrome', 'browser_version': '124.0.0.0', 'os_name': 'Windows', 'os_version': '10'} 2024-05-28 22:08:37,504 - octoprint.server.util.sockjs - INFO - User will logged out, logging out on socket 2024-05-28 22:08:37,509 - octoprint.access.users - INFO - Logged out user: will 2024-05-28 22:08:37,802 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2024-05-28 22:08:37,816 - octoprint.server.api.settings - ERROR - Could not load settings for plugin OctoDash Companion (0.0.7) Traceback (most recent call last): File "/home/pi/oprint/lib/python3.9/site-packages/octoprint/server/api/settings.py", line 451, in _get_plugin_settings result = plugin.on_settings_load() File "/home/pi/oprint/lib/python3.9/site-packages/octoprint/util/__init__.py", line 1686, in wrapper return f(*args, **kwargs) File "/home/pi/oprint/lib/python3.9/site-packages/octoprint_octodashcompanion/__init__.py", line 45, in on_settings_load with open(self.config_file) as file: FileNotFoundError: [Errno 2] No such file or directory: '/home/pi/.config/octodash/config.json' 2024-05-28 22:08:37,917 - octoprint.server.util.sockjs - INFO - Client connection closed: 192.168.86.47 2024-05-28 22:08:38,295 - octoprint.server.util.sockjs - INFO - New connection from client: 192.168.86.47 2024-05-28 22:08:45,679 - octoprint.access.users - INFO - Logged in user: will 2024-05-28 22:08:45,680 - octoprint.server.api - INFO - Actively logging in user will from 192.168.86.47 2024-05-28 22:08:45,735 - octoprint.server.util.flask - INFO - Passively logging in user will from 192.168.86.47 2024-05-28 22:08:45,735 - octoprint.access.users - INFO - Logged in user: will 2024-05-28 22:08:45,959 - octoprint.server.util.sockjs - INFO - Client connection closed: 192.168.86.47 2024-05-28 22:08:46,283 - octoprint.server.util.sockjs - INFO - New connection from client: 192.168.86.47 2024-05-28 22:08:46,326 - octoprint.server.util.flask - INFO - Passively logging in user will from 192.168.86.47 2024-05-28 22:08:46,326 - octoprint.access.users - INFO - Logged in user: will 2024-05-28 22:08:46,419 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2024-05-28 22:08:46,420 - octoprint.server.api.settings - ERROR - Could not load settings for plugin OctoDash Companion (0.0.7) Traceback (most recent call last): File "/home/pi/oprint/lib/python3.9/site-packages/octoprint/server/api/settings.py", line 451, in _get_plugin_settings result = plugin.on_settings_load() File "/home/pi/oprint/lib/python3.9/site-packages/octoprint/util/__init__.py", line 1686, in wrapper return f(*args, **kwargs) File "/home/pi/oprint/lib/python3.9/site-packages/octoprint_octodashcompanion/__init__.py", line 45, in on_settings_load with open(self.config_file) as file: FileNotFoundError: [Errno 2] No such file or directory: '/home/pi/.config/octodash/config.json' 2024-05-28 22:08:46,535 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2024-05-28 22:08:46,536 - octoprint.server.api.settings - ERROR - Could not load settings for plugin OctoDash Companion (0.0.7) Traceback (most recent call last): File "/home/pi/oprint/lib/python3.9/site-packages/octoprint/server/api/settings.py", line 451, in _get_plugin_settings result = plugin.on_settings_load() File "/home/pi/oprint/lib/python3.9/site-packages/octoprint/util/__init__.py", line 1686, in wrapper return f(*args, **kwargs) File "/home/pi/oprint/lib/python3.9/site-packages/octoprint_octodashcompanion/__init__.py", line 45, in on_settings_load with open(self.config_file) as file: FileNotFoundError: [Errno 2] No such file or directory: '/home/pi/.config/octodash/config.json' 2024-05-28 22:08:46,854 - octoprint.server.util.sockjs - INFO - User will logged in on the socket from client 192.168.86.47 2024-05-28 22:08:48,073 - octoprint.plugins.tracking - INFO - Sent tracking event webui_load, payload: {'browser_name': 'Chrome', 'browser_version': '124.0.0.0', 'os_name': 'Windows', 'os_version': '10'} 2024-05-28 22:08:58,354 - octoprint.server.util.flask - INFO - Passively logging in user will from 192.168.86.26 2024-05-28 22:08:58,356 - octoprint.access.users - INFO - Logged in user: will 2024-05-28 22:08:58,447 - octoprint.server.util.sockjs - INFO - New connection from client: 192.168.86.26 2024-05-28 22:08:58,456 - octoprint.server.util.sockjs - INFO - User will logged in on the socket from client 192.168.86.26 2024-05-28 22:09:04,565 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2024-05-28 22:09:04,591 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 7 port/baudrate candidates: /dev/ttyUSB0@115200, /dev/ttyUSB0@250000, /dev/ttyUSB0@230400, /dev/ttyUSB0@57600, /dev/ttyUSB0@38400, /dev/ttyUSB0@19200, /dev/ttyUSB0@9600 2024-05-28 22:09:04,591 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200 2024-05-28 22:09:04,593 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200 2024-05-28 22:09:04,627 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2024-05-28 22:09:04,632 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2024-05-28 22:09:04,705 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2024-05-28 22:09:04,707 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://OctoPrint.local:80/', 'accessToken': '59ADA74C5C6D4B569D522D08FD1C4AFF'}, 'printer': {'name': 'Default', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 200, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 0, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 30, 'useM600': False}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': True}, 'spoolManager': {'enabled': False}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'icon': 'home', 'command': 'G28', 'color': '#dcdde1', 'confirm': False, 'exit': True}, {'icon': 'ruler-vertical', 'command': 'G29', 'color': '#4bae50', 'confirm': False, 'exit': True}, {'icon': 'fire-alt', 'command': 'M140 S50; M104 S185', 'color': '#e1b12c', 'confirm': False, 'exit': True}, {'icon': 'snowflake', 'command': 'M140 S0; M104 S0', 'color': '#0097e6', 'confirm': False, 'exit': True}, {'icon': 'redo-alt', 'command': '[!RELOAD]', 'color': '#7f8fa6', 'confirm': True, 'exit': False}, {'icon': 'power-off', 'command': '[!SHUTDOWN]', 'color': '#e84118', 'confirm': True, 'exit': False}], 'fileSorting': {'attribute': 'name', 'order': 'asc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': False, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2024-05-28 22:09:04,835 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2024-05-28 22:09:04,836 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://OctoPrint.local:80/', 'accessToken': '59ADA74C5C6D4B569D522D08FD1C4AFF'}, 'printer': {'name': 'Default', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 200, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 0, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 30, 'useM600': False}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': True}, 'spoolManager': {'enabled': False}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'icon': 'home', 'command': 'G28', 'color': '#dcdde1', 'confirm': False, 'exit': True}, {'icon': 'ruler-vertical', 'command': 'G29', 'color': '#4bae50', 'confirm': False, 'exit': True}, {'icon': 'fire-alt', 'command': 'M140 S50; M104 S185', 'color': '#e1b12c', 'confirm': False, 'exit': True}, {'icon': 'snowflake', 'command': 'M140 S0; M104 S0', 'color': '#0097e6', 'confirm': False, 'exit': True}, {'icon': 'redo-alt', 'command': '[!RELOAD]', 'color': '#7f8fa6', 'confirm': True, 'exit': False}, {'icon': 'power-off', 'command': '[!SHUTDOWN]', 'color': '#e84118', 'confirm': True, 'exit': False}], 'fileSorting': {'attribute': 'name', 'order': 'asc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': False, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2024-05-28 22:09:05,067 - octoprint.server - INFO - Autorefresh of serial port list stopped 2024-05-28 22:09:06,766 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2024-05-28 22:09:06,776 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2024-05-28 22:09:10,766 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2024-05-28 22:09:10,777 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2024-05-28 22:09:14,765 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 250000 2024-05-28 22:09:14,769 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2024-05-28 22:09:14,774 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2024-05-28 22:09:18,768 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2024-05-28 22:09:18,782 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2024-05-28 22:09:22,768 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2024-05-28 22:09:22,782 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2024-05-28 22:09:26,768 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 230400 2024-05-28 22:09:26,772 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2024-05-28 22:09:26,785 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2024-05-28 22:09:30,763 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2024-05-28 22:09:30,776 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2024-05-28 22:09:34,763 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2024-05-28 22:09:34,772 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2024-05-28 22:09:37,387 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 57600 2024-05-28 22:09:37,391 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2024-05-28 22:09:37,399 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2024-05-28 22:09:40,764 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2024-05-28 22:09:40,777 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2024-05-28 22:09:44,764 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2024-05-28 22:09:44,776 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2024-05-28 22:09:48,764 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 38400 2024-05-28 22:09:48,768 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2024-05-28 22:09:48,779 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2024-05-28 22:09:52,108 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2024-05-28 22:09:52,119 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2024-05-28 22:09:54,764 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2024-05-28 22:09:54,778 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2024-05-28 22:09:58,764 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 19200 2024-05-28 22:09:58,767 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2024-05-28 22:09:58,780 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2024-05-28 22:10:02,763 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2024-05-28 22:10:02,775 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2024-05-28 22:10:05,710 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2024-05-28 22:10:05,720 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2024-05-28 22:10:08,763 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 9600 2024-05-28 22:10:08,765 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2024-05-28 22:10:08,777 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2024-05-28 22:10:12,759 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2024-05-28 22:10:12,770 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2024-05-28 22:10:16,759 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2024-05-28 22:10:16,770 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2024-05-28 22:10:19,149 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Error" 2024-05-28 22:10:19,186 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2024-05-28 22:10:19,251 - octoprint.server - INFO - Starting autorefresh of serial port list 2024-05-28 22:10:19,263 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2024-05-28 22:10:19,687 - octoprint.plugins.tracking - INFO - Sent tracking event commerror_autodetect, payload: {'commerror_text': 'No more candidates to test, and no working port/baudrate combination detected.'} 2024-05-28 22:11:46,251 - octoprint.server.util.sockjs - INFO - Client connection closed: 192.168.86.26 2024-05-28 22:11:46,447 - octoprint.server.util.sockjs - INFO - Client connection closed: 192.168.86.47 2024-05-28 22:11:54,009 - octoprint.startup - INFO - ****************************************************************************** 2024-05-28 22:11:54,011 - octoprint.startup - INFO - Starting OctoPrint 1.10.1 2024-05-28 22:11:54,021 - octoprint.startup - INFO - ****************************************************************************** 2024-05-28 22:12:00,557 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: offline 2024-05-28 22:12:00,558 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 8.8.8.8:53 is not working 2024-05-28 22:12:00,559 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is not working 2024-05-28 22:12:00,576 - octoprint.startup - INFO - We don't appear to be online, not fetching plugin blacklist 2024-05-28 22:12:00,594 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2024-05-28 22:12:04,340 - octoprint.startup - INFO - Added settings overlay from plugin octodashcompanion 2024-05-28 22:12:04,347 - octoprint.plugin.core - INFO - Found 24 plugin(s) providing 24 mixin implementations, 61 hook handlers 2024-05-28 22:12:04,351 - octoprint.server.heartbeat - INFO - Starting server heartbeat, 900.0s interval 2024-05-28 22:12:04,733 - octoprint.server - INFO - Intermediary server started 2024-05-28 22:12:04,767 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/pi/.octoprint/uploads... 2024-05-28 22:12:04,768 - octoprint.filemanager.storage - INFO - ... file metadata for /home/pi/.octoprint/uploads initialized successfully. 2024-05-28 22:12:04,773 - octoprint.server - INFO - Added new permission from plugin achievements: PLUGIN_ACHIEVEMENTS_VIEW (needs: "Need(method='role', value='plugin_achievements_view')") 2024-05-28 22:12:04,773 - octoprint.server - INFO - Added new permission from plugin achievements: PLUGIN_ACHIEVEMENTS_RESET (needs: "Need(method='role', value='plugin_achievements_reset')") 2024-05-28 22:12:04,773 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_SHOW (needs: "Need(method='role', value='plugin_action_command_notification_show')") 2024-05-28 22:12:04,774 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_CLEAR (needs: "Need(method='role', value='plugin_action_command_notification_clear')") 2024-05-28 22:12:04,774 - octoprint.server - INFO - Added new permission from plugin action_command_prompt: PLUGIN_ACTION_COMMAND_PROMPT_INTERACT (needs: "Need(method='role', value='plugin_action_command_prompt_interact')") 2024-05-28 22:12:04,774 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_READ (needs: "Need(method='role', value='plugin_announcements_read')") 2024-05-28 22:12:04,775 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_MANAGE (needs: "Need(method='role', value='plugin_announcements_manage'), Need(method='role', value='plugin_announcements_read')") 2024-05-28 22:12:04,775 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_ADMIN (needs: "Need(method='role', value='plugin_appkeys_admin')") 2024-05-28 22:12:04,775 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_GRANT (needs: "Need(method='role', value='plugin_appkeys_user')") 2024-05-28 22:12:04,776 - octoprint.server - INFO - Added new permission from plugin backup: PLUGIN_BACKUP_CREATE (needs: "Need(method='role', value='plugin_backup_create')") 2024-05-28 22:12:04,776 - octoprint.server - INFO - Added new permission from plugin file_check: PLUGIN_FILE_CHECK_RUN (needs: "Need(method='role', value='plugin_file_check_run')") 2024-05-28 22:12:04,776 - octoprint.server - INFO - Added new permission from plugin firmware_check: PLUGIN_FIRMWARE_CHECK_DISPLAY (needs: "Need(method='role', value='plugin_firmware_check_display')") 2024-05-28 22:12:04,776 - octoprint.server - INFO - Added new permission from plugin logging: PLUGIN_LOGGING_MANAGE (needs: "Need(method='role', value='plugin_logging_manage')") 2024-05-28 22:12:04,777 - octoprint.server - INFO - Added new permission from plugin octodashcompanion: PLUGIN_OCTODASHCOMPANION_MANAGEBACKUPS (needs: "Need(method='role', value='plugin_octodashcompanion_admin')") 2024-05-28 22:12:04,777 - octoprint.server - INFO - Added new permission from plugin pi_support: PLUGIN_PI_SUPPORT_STATUS (needs: "Need(method='role', value='plugin_pi_support_check')") 2024-05-28 22:12:04,777 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_LIST (needs: "Need(method='role', value='plugin_pluginmanager_list')") 2024-05-28 22:12:04,782 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_MANAGE (needs: "Need(method='role', value='plugin_pluginmanager_manage')") 2024-05-28 22:12:04,783 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_INSTALL (needs: "Need(method='role', value='plugin_pluginmanager_install'), Need(method='role', value='plugin_pluginmanager_manage')") 2024-05-28 22:12:04,784 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CHECK (needs: "Need(method='role', value='plugin_softwareupdate_check')") 2024-05-28 22:12:04,785 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_UPDATE (needs: "Need(method='role', value='plugin_softwareupdate_update')") 2024-05-28 22:12:04,787 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CONFIGURE (needs: "Need(method='role', value='plugin_softwareupdate_configure')") 2024-05-28 22:12:04,818 - octoprint.printer.standard - INFO - Using print time estimator provided by PrintTimeGenius 2024-05-28 22:12:06,727 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2024-05-28 22:12:07,707 - octoprint.util.pip - INFO - Version of pip is 22.3 2024-05-28 22:12:07,714 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2024-05-28 22:12:07,715 - octoprint.util.pip - INFO - ==> pip ok -> yes 2024-05-28 22:12:07,745 - octoprint.plugins.achievements - INFO - Loading data from /home/pi/.octoprint/data/achievements/data.json 2024-05-28 22:12:07,749 - octoprint.plugins.achievements - INFO - Loading data for None from /home/pi/.octoprint/data/achievements/2024.json 2024-05-28 22:12:07,819 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk 2024-05-28 22:12:07,899 - octoprint.plugins.file_check - INFO - Native grep available: True 2024-05-28 22:12:07,930 - octoprint.plugin.core - INFO - Initialized 24 plugin implementation(s) 2024-05-28 22:12:07,970 - octoprint - INFO - Installing webcam compat overlay for configured default webcam 2024-05-28 22:12:07,972 - octoprint.plugin.core - INFO - 24 plugin(s) registered with the system: | Achievements Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/achievements | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/appkeys | Backup & Restore (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/backup | Classic Webcam (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/classicwebcam | Core Wizard (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/corewizard | Cura Thumbnails (1.0.2) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_ultimakerformatpackage | Discovery (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/discovery | DisplayLayerProgress Plugin (1.28.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_DisplayLayerProgress | Error Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/errortracking | Event Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/eventmanager | File Check (2024.3.27) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_file_check | Firmware Check (2021.10.11) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmware_check | GCode Viewer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/gcodeviewer | Logging (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/logging | OctoDash Companion (0.0.7) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_octodashcompanion | Pi Support Plugin (2023.10.10) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/pluginmanager | PrintTimeGenius Plugin (2.3.3) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_PrintTimeGenius | Software Update (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/softwareupdate | Virtual Printer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2024-05-28 22:12:08,014 - octoprint.environment - INFO - Detected environment is Python 3.9.2 under Linux (linux). Details: | hardware: | cores: 4 | freq: 1800.0 | ram: 1909604352 | os: | bits: 32 | id: linux | platform: linux | plugins: | pi_support: | model: Raspberry Pi 4 Model B Rev 1.5 | octopi_camera_stack: camera-streamer | octopi_version: 1.0.0 | octopiuptodate_build: 1.0.0-1.10.1-20240514102430 | octopiuptodate_build_short: 2024.05.14.102430 | throttle_check_enabled: true | throttle_check_functional: true | throttle_state: '0x0' | python: | pip: '22.3' | version: 3.9.2 | virtualenv: /home/pi/oprint 2024-05-28 22:12:08,031 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/webassets... 2024-05-28 22:12:08,032 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-cache... 2024-05-28 22:12:08,033 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-manifest.json... 2024-05-28 22:12:08,193 - octoprint.plugins.DisplayLayerProgress - WARNING - The Blueprint of this plugin is relying on the default implementation of is_blueprint_csrf_protected (newly added in OctoPrint 1.8.3), which in a future version will be switched from False to True for security reasons. Plugin authors should ensure they explicitly declare the CSRF protection status in their BlueprintPlugin mixin implementation. Recommendation is to enable CSRF protection and exempt views that must not use it with the octoprint.plugin.BlueprintPlugin.csrf_exempt decorator. 2024-05-28 22:12:08,193 - octoprint.server - WARNING - CSRF Protection for Blueprint of plugin DisplayLayerProgress is DISABLED 2024-05-28 22:12:08,197 - octoprint.plugins.octodashcompanion - WARNING - The Blueprint of this plugin is relying on the default implementation of is_blueprint_csrf_protected (newly added in OctoPrint 1.8.3), which in a future version will be switched from False to True for security reasons. Plugin authors should ensure they explicitly declare the CSRF protection status in their BlueprintPlugin mixin implementation. Recommendation is to enable CSRF protection and exempt views that must not use it with the octoprint.plugin.BlueprintPlugin.csrf_exempt decorator. 2024-05-28 22:12:08,198 - octoprint.server - WARNING - CSRF Protection for Blueprint of plugin octodashcompanion is DISABLED 2024-05-28 22:12:08,545 - octoprint.server - INFO - Shutting down intermediary server... 2024-05-28 22:12:08,961 - octoprint.server - INFO - Intermediary server shut down 2024-05-28 22:12:08,964 - octoprint.events - INFO - Processing startup event, this is our first event 2024-05-28 22:12:08,965 - octoprint.events - INFO - Adding 1 events to queue that were held back before startup event 2024-05-28 22:12:08,965 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue... 2024-05-28 22:12:08,972 - octoprint.server - INFO - Autoconnect on startup is configured, trying to connect to the printer... 2024-05-28 22:12:08,974 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue 2024-05-28 22:12:08,996 - octoprint.server - INFO - Trying to connect to configured serial port AUTO 2024-05-28 22:12:09,049 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2024-05-28 22:12:09,055 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 7 port/baudrate candidates: /dev/ttyUSB0@115200, /dev/ttyUSB0@250000, /dev/ttyUSB0@230400, /dev/ttyUSB0@57600, /dev/ttyUSB0@38400, /dev/ttyUSB0@19200, /dev/ttyUSB0@9600 2024-05-28 22:12:09,056 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200 2024-05-28 22:12:09,057 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200 2024-05-28 22:12:09,076 - octoprint.server - INFO - Starting autorefresh of serial port list 2024-05-28 22:12:09,080 - octoprint.server - INFO - Autorefresh of serial port list stopped 2024-05-28 22:12:09,083 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder... 2024-05-28 22:12:09,086 - octoprint.server.util.watchdog - INFO - ... initial scan done. 2024-05-28 22:12:09,105 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2024-05-28 22:12:09,110 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2024-05-28 22:12:09,908 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on OctoPrint._http._tcp.local.' for _http._tcp.local. 2024-05-28 22:12:10,720 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on OctoPrint._octoprint._tcp.local.' for _octoprint._tcp.local. 2024-05-28 22:12:10,727 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance on OctoPrint for SSDP 2024-05-28 22:12:10,765 - octoprint.server - INFO - Listening on http://127.0.0.1:5000 2024-05-28 22:12:10,874 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2024-05-28 22:12:10,894 - octoprint.server.util.sockjs - INFO - New connection from client: 192.168.86.47 2024-05-28 22:12:11,103 - octoprint.server.util.flask - INFO - Passively logging in user will from 192.168.86.47 2024-05-28 22:12:11,104 - octoprint.access.users - INFO - Logged in user: will 2024-05-28 22:12:11,117 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2024-05-28 22:12:11,161 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2024-05-28 22:12:11,384 - octoprint.server.util.sockjs - INFO - User will logged in on the socket from client 192.168.86.47 2024-05-28 22:12:11,814 - octoprint.plugins.softwareupdate - INFO - Not fetching check overlays, we are offline 2024-05-28 22:12:11,946 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2024-05-28 22:12:12,042 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://OctoPrint.local:80/', 'accessToken': '59ADA74C5C6D4B569D522D08FD1C4AFF'}, 'printer': {'name': 'Default', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 200, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 0, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 30, 'useM600': False}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': True}, 'spoolManager': {'enabled': False}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'icon': 'home', 'command': 'G28', 'color': '#dcdde1', 'confirm': False, 'exit': True}, {'icon': 'ruler-vertical', 'command': 'G29', 'color': '#4bae50', 'confirm': False, 'exit': True}, {'icon': 'fire-alt', 'command': 'M140 S50; M104 S185', 'color': '#e1b12c', 'confirm': False, 'exit': True}, {'icon': 'snowflake', 'command': 'M140 S0; M104 S0', 'color': '#0097e6', 'confirm': False, 'exit': True}, {'icon': 'redo-alt', 'command': '[!RELOAD]', 'color': '#7f8fa6', 'confirm': True, 'exit': False}, {'icon': 'power-off', 'command': '[!SHUTDOWN]', 'color': '#e84118', 'confirm': True, 'exit': False}], 'fileSorting': {'attribute': 'name', 'order': 'asc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': False, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2024-05-28 22:12:12,191 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2024-05-28 22:12:12,194 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2024-05-28 22:12:12,195 - octoprint.util.pip - INFO - ==> pip ok -> yes 2024-05-28 22:12:12,311 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 53.4GB. That is considered sufficient for updating. 2024-05-28 22:12:12,382 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity changed from offline to online 2024-05-28 22:12:12,495 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2024-05-28 22:12:12,700 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2024-05-28 22:12:12,800 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://OctoPrint.local:80/', 'accessToken': '59ADA74C5C6D4B569D522D08FD1C4AFF'}, 'printer': {'name': 'Default', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 200, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 0, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 30, 'useM600': False}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': True}, 'spoolManager': {'enabled': False}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'icon': 'home', 'command': 'G28', 'color': '#dcdde1', 'confirm': False, 'exit': True}, {'icon': 'ruler-vertical', 'command': 'G29', 'color': '#4bae50', 'confirm': False, 'exit': True}, {'icon': 'fire-alt', 'command': 'M140 S50; M104 S185', 'color': '#e1b12c', 'confirm': False, 'exit': True}, {'icon': 'snowflake', 'command': 'M140 S0; M104 S0', 'color': '#0097e6', 'confirm': False, 'exit': True}, {'icon': 'redo-alt', 'command': '[!RELOAD]', 'color': '#7f8fa6', 'confirm': True, 'exit': False}, {'icon': 'power-off', 'command': '[!SHUTDOWN]', 'color': '#e84118', 'confirm': True, 'exit': False}], 'fileSorting': {'attribute': 'name', 'order': 'asc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': False, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2024-05-28 22:12:12,902 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'http://192.168.86.26/', 'path': '/', 'query_string': 'l10n=en'} 2024-05-28 22:12:12,948 - octoprint.server.util.flask - INFO - Passively logging in user will from 192.168.86.26 2024-05-28 22:12:13,006 - octoprint.plugins.pluginmanager - INFO - Loaded plugin notices data from https://plugins.octoprint.org/notices.json 2024-05-28 22:12:13,092 - octoprint.access.users - INFO - Logged in user: will 2024-05-28 22:12:13,162 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2024-05-28 22:12:13,294 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 9, 'printer_state': 'DETECT_SERIAL'} 2024-05-28 22:12:13,306 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2024-05-28 22:12:14,207 - octoprint.plugins.tracking - INFO - Sent tracking event pong, payload: {'version': '1.10.1', 'os': 'linux', 'bits': 32, 'python': '3.9.2', 'pip': '22.3', 'cores': 4, 'freq': 1800.0, 'ram': 1909604352, 'pi_model': 'Raspberry Pi 4 Model B Rev 1.5', 'octopi_version': '1.0.0', 'octopiuptodate_build': '1.0.0-1.10.1-20240514102430', 'plugins': 'ultimakerformatpackage:1.0.2,printtimegenius:2.3.3,octodashcompanion:0.0.7,displaylayerprogress:1.28.0', 'achievements': 'the_wizard'} 2024-05-28 22:12:14,296 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2024-05-28 22:12:14,536 - octoprint.server.util.sockjs - INFO - New connection from client: 192.168.86.26 2024-05-28 22:12:14,571 - octoprint.server.util.sockjs - INFO - User will logged in on the socket from client 192.168.86.26 2024-05-28 22:12:14,808 - octoprint.plugins.tracking - INFO - Sent tracking event startup, payload: {'version': '1.10.1', 'os': 'linux', 'bits': 32, 'python': '3.9.2', 'pip': '22.3', 'cores': 4, 'freq': 1800.0, 'ram': 1909604352, 'pi_model': 'Raspberry Pi 4 Model B Rev 1.5', 'octopi_version': '1.0.0', 'octopiuptodate_build': '1.0.0-1.10.1-20240514102430'} 2024-05-28 22:12:15,112 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2024-05-28 22:12:15,300 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 250000 2024-05-28 22:12:15,306 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2024-05-28 22:12:15,311 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2024-05-28 22:12:15,318 - octoprint.util.comm - INFO - Got a resend request for line 1 which is also our current line. It looks like we just handled a reset and this is a left over of this 2024-05-28 22:12:15,324 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Operational" 2024-05-28 22:12:15,334 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2024-05-28 22:12:15,386 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin 2.1.3 MRiscoC Ender3V2-427-BLTUBL-T13-MPC, based on bugfix-2.1.x (Jan 27 2024 14:32:55)" 2024-05-28 22:12:15,387 - octoprint.util.comm - INFO - Firmware info line: FIRMWARE_NAME:Marlin 2.1.3 MRiscoC Ender3V2-427-BLTUBL-T13-MPC, based on bugfix-2.1.x (Jan 27 2024 14:32:55) SOURCE_CODE_URL:github.com/mriscoc/Ender3V2S1 PROTOCOL_VERSION:1.0 MACHINE_TYPE:Ender3V2-427-BLTUBL-T13-MPC EXTRUDER_COUNT:1 UUID:cede2a2f-41a2-4748-9b12-c55c62f367ff 2024-05-28 22:12:15,425 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting 2024-05-28 22:12:15,441 - octoprint.util.comm - INFO - Firmware states that it supports emergency GCODEs to be sent without waiting for an acknowledgement first 2024-05-28 22:12:15,454 - octoprint.util.comm - INFO - Firmware states that it supports writing long filenames 2024-05-28 22:12:15,463 - octoprint.util.comm - INFO - Firmware states that it supports long filenames 2024-05-28 22:12:15,476 - octoprint.util.comm - INFO - Firmware sent the following capability report: SERIAL_XON_XOFF: not supported BINARY_FILE_TRANSFER: supported EEPROM: supported VOLUMETRIC: supported AUTOREPORT_POS: not supported AUTOREPORT_TEMP: supported PROGRESS: not supported PRINT_JOB: supported AUTOLEVEL: supported RUNOUT: supported Z_PROBE: supported LEVELING_DATA: supported BUILD_PERCENT: supported SOFTWARE_POWER: not supported TOGGLE_LIGHTS: not supported CASE_LIGHT_BRIGHTNESS: not supported EMERGENCY_PARSER: supported HOST_ACTION_COMMANDS: supported PROMPT_SUPPORT: supported SDCARD: supported MULTI_VOLUME: not supported REPEAT: not supported SD_WRITE: supported AUTOREPORT_SD_STATUS: not supported LONG_FILENAME: supported LFN_WRITE: supported CUSTOM_FIRMWARE_UPLOAD: supported EXTENDED_M20: supported THERMAL_PROTECTION: supported MOTION_MODES: not supported ARCS: supported BABYSTEPPING: supported EP_BABYSTEP: not supported CHAMBER_TEMPERATURE: not supported COOLER_TEMPERATURE: not supported MEATPACK: not supported CONFIG_EXPORT: not supported 2024-05-28 22:12:15,778 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {'firmware_name': 'Marlin 2.1.3 MRiscoC Ender3V2-427-BLTUBL-T13-MPC, based on bugfix-2.1.x (Jan 27 2024 14:32:55)', 'printer_port': 'AUTO', 'printer_baudrate': 0} 2024-05-28 22:12:21,098 - octoprint.server.util.flask - INFO - Passively logging in user will from 192.168.86.47 2024-05-28 22:12:21,099 - octoprint.access.users - INFO - Logged in user: will 2024-05-28 22:12:22,059 - octoprint.server.preemptive_cache - INFO - ... done in 9.16s 2024-05-28 22:12:22,382 - octoprint.server.util.sockjs - INFO - Client connection closed: 192.168.86.47 2024-05-28 22:12:23,678 - octoprint.server.util.sockjs - INFO - New connection from client: 192.168.86.47 2024-05-28 22:12:23,728 - octoprint.server.util.flask - INFO - Passively logging in user will from 192.168.86.47 2024-05-28 22:12:23,728 - octoprint.access.users - INFO - Logged in user: will 2024-05-28 22:12:23,814 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2024-05-28 22:12:23,815 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://OctoPrint.local:80/', 'accessToken': '59ADA74C5C6D4B569D522D08FD1C4AFF'}, 'printer': {'name': 'Default', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 200, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 0, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 30, 'useM600': False}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': True}, 'spoolManager': {'enabled': False}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'icon': 'home', 'command': 'G28', 'color': '#dcdde1', 'confirm': False, 'exit': True}, {'icon': 'ruler-vertical', 'command': 'G29', 'color': '#4bae50', 'confirm': False, 'exit': True}, {'icon': 'fire-alt', 'command': 'M140 S50; M104 S185', 'color': '#e1b12c', 'confirm': False, 'exit': True}, {'icon': 'snowflake', 'command': 'M140 S0; M104 S0', 'color': '#0097e6', 'confirm': False, 'exit': True}, {'icon': 'redo-alt', 'command': '[!RELOAD]', 'color': '#7f8fa6', 'confirm': True, 'exit': False}, {'icon': 'power-off', 'command': '[!SHUTDOWN]', 'color': '#e84118', 'confirm': True, 'exit': False}], 'fileSorting': {'attribute': 'name', 'order': 'asc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': False, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2024-05-28 22:12:23,924 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2024-05-28 22:12:23,926 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://OctoPrint.local:80/', 'accessToken': '59ADA74C5C6D4B569D522D08FD1C4AFF'}, 'printer': {'name': 'Default', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 200, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 0, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 30, 'useM600': False}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': True}, 'spoolManager': {'enabled': False}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'icon': 'home', 'command': 'G28', 'color': '#dcdde1', 'confirm': False, 'exit': True}, {'icon': 'ruler-vertical', 'command': 'G29', 'color': '#4bae50', 'confirm': False, 'exit': True}, {'icon': 'fire-alt', 'command': 'M140 S50; M104 S185', 'color': '#e1b12c', 'confirm': False, 'exit': True}, {'icon': 'snowflake', 'command': 'M140 S0; M104 S0', 'color': '#0097e6', 'confirm': False, 'exit': True}, {'icon': 'redo-alt', 'command': '[!RELOAD]', 'color': '#7f8fa6', 'confirm': True, 'exit': False}, {'icon': 'power-off', 'command': '[!SHUTDOWN]', 'color': '#e84118', 'confirm': True, 'exit': False}], 'fileSorting': {'attribute': 'name', 'order': 'asc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': False, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2024-05-28 22:12:24,247 - octoprint.server.util.sockjs - INFO - User will logged in on the socket from client 192.168.86.47 2024-05-28 22:12:25,197 - octoprint.plugins.tracking - INFO - Sent tracking event webui_load, payload: {'browser_name': 'Chrome', 'browser_version': '124.0.0.0', 'os_name': 'Windows', 'os_version': '10'} 2024-05-28 22:19:19,521 - octoprint.plugins.action_command_notification - INFO - Got a notification: Settings Stored 2024-05-28 22:22:44,675 - octoprint.plugins.action_command_notification - INFO - Got a notification: Settings Stored 2024-05-28 22:26:11,059 - octoprint.plugins.action_command_notification - INFO - Got a notification: Settings Stored 2024-05-28 22:27:04,353 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2024-05-28 22:27:10,314 - octoprint.util.comm - INFO - Printer seems to support the busy protocol, will adjust timeouts and set busy interval accordingly 2024-05-28 22:27:13,033 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 894, 'printer_state': 'OPERATIONAL'} 2024-05-28 22:27:18,347 - octoprint.util.comm - INFO - Telling the printer to set the busy interval to our "communicationBusy" timeout - 1s = 2s 2024-05-28 22:42:04,354 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2024-05-28 22:42:13,237 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 1794, 'printer_state': 'OPERATIONAL'} 2024-05-28 22:49:29,704 - octoprint.plugins.action_command_notification - INFO - Got a notification: Settings Stored 2024-05-28 22:57:04,355 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2024-05-28 22:57:14,233 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 2694, 'printer_state': 'OPERATIONAL'} 2024-05-28 22:46:26,675 - octoprint.startup - INFO - ****************************************************************************** 2024-05-28 22:46:26,678 - octoprint.startup - INFO - Starting OctoPrint 1.10.1 2024-05-28 22:46:26,687 - octoprint.startup - INFO - ****************************************************************************** 2024-05-28 22:46:33,004 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: offline 2024-05-28 22:46:33,005 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 8.8.8.8:53 is not working 2024-05-28 22:46:33,005 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is not working 2024-05-28 22:46:33,010 - octoprint.startup - INFO - We don't appear to be online, not fetching plugin blacklist 2024-05-28 22:46:33,015 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2024-05-28 22:46:36,874 - octoprint.startup - INFO - Added settings overlay from plugin octodashcompanion 2024-05-28 22:46:36,881 - octoprint.plugin.core - INFO - Found 24 plugin(s) providing 24 mixin implementations, 61 hook handlers 2024-05-28 22:46:36,886 - octoprint.server.heartbeat - INFO - Starting server heartbeat, 900.0s interval 2024-05-28 22:46:37,396 - octoprint.server - INFO - Intermediary server started 2024-05-28 22:46:37,421 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/pi/.octoprint/uploads... 2024-05-28 22:46:37,423 - octoprint.filemanager.storage - INFO - ... file metadata for /home/pi/.octoprint/uploads initialized successfully. 2024-05-28 22:46:37,428 - octoprint.server - INFO - Added new permission from plugin achievements: PLUGIN_ACHIEVEMENTS_VIEW (needs: "Need(method='role', value='plugin_achievements_view')") 2024-05-28 22:46:37,429 - octoprint.server - INFO - Added new permission from plugin achievements: PLUGIN_ACHIEVEMENTS_RESET (needs: "Need(method='role', value='plugin_achievements_reset')") 2024-05-28 22:46:37,429 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_SHOW (needs: "Need(method='role', value='plugin_action_command_notification_show')") 2024-05-28 22:46:37,429 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_CLEAR (needs: "Need(method='role', value='plugin_action_command_notification_clear')") 2024-05-28 22:46:37,430 - octoprint.server - INFO - Added new permission from plugin action_command_prompt: PLUGIN_ACTION_COMMAND_PROMPT_INTERACT (needs: "Need(method='role', value='plugin_action_command_prompt_interact')") 2024-05-28 22:46:37,430 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_READ (needs: "Need(method='role', value='plugin_announcements_read')") 2024-05-28 22:46:37,431 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_MANAGE (needs: "Need(method='role', value='plugin_announcements_manage'), Need(method='role', value='plugin_announcements_read')") 2024-05-28 22:46:37,431 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_ADMIN (needs: "Need(method='role', value='plugin_appkeys_admin')") 2024-05-28 22:46:37,433 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_GRANT (needs: "Need(method='role', value='plugin_appkeys_user')") 2024-05-28 22:46:37,434 - octoprint.server - INFO - Added new permission from plugin backup: PLUGIN_BACKUP_CREATE (needs: "Need(method='role', value='plugin_backup_create')") 2024-05-28 22:46:37,436 - octoprint.server - INFO - Added new permission from plugin file_check: PLUGIN_FILE_CHECK_RUN (needs: "Need(method='role', value='plugin_file_check_run')") 2024-05-28 22:46:37,438 - octoprint.server - INFO - Added new permission from plugin firmware_check: PLUGIN_FIRMWARE_CHECK_DISPLAY (needs: "Need(method='role', value='plugin_firmware_check_display')") 2024-05-28 22:46:37,439 - octoprint.server - INFO - Added new permission from plugin logging: PLUGIN_LOGGING_MANAGE (needs: "Need(method='role', value='plugin_logging_manage')") 2024-05-28 22:46:37,441 - octoprint.server - INFO - Added new permission from plugin octodashcompanion: PLUGIN_OCTODASHCOMPANION_MANAGEBACKUPS (needs: "Need(method='role', value='plugin_octodashcompanion_admin')") 2024-05-28 22:46:37,443 - octoprint.server - INFO - Added new permission from plugin pi_support: PLUGIN_PI_SUPPORT_STATUS (needs: "Need(method='role', value='plugin_pi_support_check')") 2024-05-28 22:46:37,444 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_LIST (needs: "Need(method='role', value='plugin_pluginmanager_list')") 2024-05-28 22:46:37,446 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_MANAGE (needs: "Need(method='role', value='plugin_pluginmanager_manage')") 2024-05-28 22:46:37,447 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_INSTALL (needs: "Need(method='role', value='plugin_pluginmanager_manage'), Need(method='role', value='plugin_pluginmanager_install')") 2024-05-28 22:46:37,449 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CHECK (needs: "Need(method='role', value='plugin_softwareupdate_check')") 2024-05-28 22:46:37,451 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_UPDATE (needs: "Need(method='role', value='plugin_softwareupdate_update')") 2024-05-28 22:46:37,452 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CONFIGURE (needs: "Need(method='role', value='plugin_softwareupdate_configure')") 2024-05-28 22:46:37,474 - octoprint.printer.standard - INFO - Using print time estimator provided by PrintTimeGenius 2024-05-28 22:46:38,961 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2024-05-28 22:46:39,996 - octoprint.util.pip - INFO - Version of pip is 22.3 2024-05-28 22:46:40,006 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2024-05-28 22:46:40,006 - octoprint.util.pip - INFO - ==> pip ok -> yes 2024-05-28 22:46:40,033 - octoprint.plugins.achievements - INFO - Loading data from /home/pi/.octoprint/data/achievements/data.json 2024-05-28 22:46:40,037 - octoprint.plugins.achievements - INFO - Loading data for None from /home/pi/.octoprint/data/achievements/2024.json 2024-05-28 22:46:40,106 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk 2024-05-28 22:46:40,186 - octoprint.plugins.file_check - INFO - Native grep available: True 2024-05-28 22:46:40,217 - octoprint.plugin.core - INFO - Initialized 24 plugin implementation(s) 2024-05-28 22:46:40,250 - octoprint - INFO - Installing webcam compat overlay for configured default webcam 2024-05-28 22:46:40,252 - octoprint.plugin.core - INFO - 24 plugin(s) registered with the system: | Achievements Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/achievements | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/appkeys | Backup & Restore (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/backup | Classic Webcam (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/classicwebcam | Core Wizard (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/corewizard | Cura Thumbnails (1.0.2) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_ultimakerformatpackage | Discovery (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/discovery | DisplayLayerProgress Plugin (1.28.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_DisplayLayerProgress | Error Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/errortracking | Event Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/eventmanager | File Check (2024.3.27) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_file_check | Firmware Check (2021.10.11) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmware_check | GCode Viewer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/gcodeviewer | Logging (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/logging | OctoDash Companion (0.0.7) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_octodashcompanion | Pi Support Plugin (2023.10.10) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/pluginmanager | PrintTimeGenius Plugin (2.3.3) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_PrintTimeGenius | Software Update (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/softwareupdate | Virtual Printer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2024-05-28 22:46:40,291 - octoprint.environment - INFO - Detected environment is Python 3.9.2 under Linux (linux). Details: | hardware: | cores: 4 | freq: 1800.0 | ram: 1909604352 | os: | bits: 32 | id: linux | platform: linux | plugins: | pi_support: | model: Raspberry Pi 4 Model B Rev 1.5 | octopi_camera_stack: camera-streamer | octopi_version: 1.0.0 | octopiuptodate_build: 1.0.0-1.10.1-20240514102430 | octopiuptodate_build_short: 2024.05.14.102430 | throttle_check_enabled: true | throttle_check_functional: true | throttle_state: '0x0' | python: | pip: '22.3' | version: 3.9.2 | virtualenv: /home/pi/oprint 2024-05-28 22:46:40,308 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/webassets... 2024-05-28 22:46:40,309 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-cache... 2024-05-28 22:46:40,310 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-manifest.json... 2024-05-28 22:46:40,441 - octoprint.plugins.DisplayLayerProgress - WARNING - The Blueprint of this plugin is relying on the default implementation of is_blueprint_csrf_protected (newly added in OctoPrint 1.8.3), which in a future version will be switched from False to True for security reasons. Plugin authors should ensure they explicitly declare the CSRF protection status in their BlueprintPlugin mixin implementation. Recommendation is to enable CSRF protection and exempt views that must not use it with the octoprint.plugin.BlueprintPlugin.csrf_exempt decorator. 2024-05-28 22:46:40,441 - octoprint.server - WARNING - CSRF Protection for Blueprint of plugin DisplayLayerProgress is DISABLED 2024-05-28 22:46:40,445 - octoprint.plugins.octodashcompanion - WARNING - The Blueprint of this plugin is relying on the default implementation of is_blueprint_csrf_protected (newly added in OctoPrint 1.8.3), which in a future version will be switched from False to True for security reasons. Plugin authors should ensure they explicitly declare the CSRF protection status in their BlueprintPlugin mixin implementation. Recommendation is to enable CSRF protection and exempt views that must not use it with the octoprint.plugin.BlueprintPlugin.csrf_exempt decorator. 2024-05-28 22:46:40,445 - octoprint.server - WARNING - CSRF Protection for Blueprint of plugin octodashcompanion is DISABLED 2024-05-28 22:46:40,752 - octoprint.server - INFO - Shutting down intermediary server... 2024-05-28 22:46:40,900 - octoprint.server - INFO - Intermediary server shut down 2024-05-28 22:46:40,905 - octoprint.events - INFO - Processing startup event, this is our first event 2024-05-28 22:46:40,905 - octoprint.events - INFO - Adding 1 events to queue that were held back before startup event 2024-05-28 22:46:40,915 - octoprint.server - INFO - Autoconnect on startup is configured, trying to connect to the printer... 2024-05-28 22:46:40,907 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue... 2024-05-28 22:46:40,923 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue 2024-05-28 22:46:40,943 - octoprint.server - INFO - Trying to connect to configured serial port AUTO 2024-05-28 22:46:40,999 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2024-05-28 22:46:41,008 - octoprint.server - INFO - Starting autorefresh of serial port list 2024-05-28 22:46:41,009 - octoprint.server - INFO - Autorefresh of serial port list stopped 2024-05-28 22:46:41,013 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder... 2024-05-28 22:46:41,026 - octoprint.server.util.watchdog - INFO - ... initial scan done. 2024-05-28 22:46:41,031 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 7 port/baudrate candidates: /dev/ttyUSB0@115200, /dev/ttyUSB0@250000, /dev/ttyUSB0@230400, /dev/ttyUSB0@57600, /dev/ttyUSB0@38400, /dev/ttyUSB0@19200, /dev/ttyUSB0@9600 2024-05-28 22:46:41,031 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200 2024-05-28 22:46:41,034 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200 2024-05-28 22:46:41,066 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2024-05-28 22:46:41,071 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2024-05-28 22:46:41,860 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on OctoPrint._http._tcp.local.' for _http._tcp.local. 2024-05-28 22:46:42,674 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on OctoPrint._octoprint._tcp.local.' for _octoprint._tcp.local. 2024-05-28 22:46:42,681 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance on OctoPrint for SSDP 2024-05-28 22:46:42,708 - octoprint.server - INFO - Listening on http://127.0.0.1:5000 2024-05-28 22:46:42,776 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2024-05-28 22:46:43,084 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2024-05-28 22:46:43,118 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2024-05-28 22:46:44,063 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2024-05-28 22:46:44,064 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2024-05-28 22:46:44,086 - octoprint.util.pip - INFO - ==> pip ok -> yes 2024-05-28 22:46:44,113 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 53.4GB. That is considered sufficient for updating. 2024-05-28 22:46:44,113 - octoprint.plugins.softwareupdate - INFO - Not fetching check overlays, we are offline 2024-05-28 22:46:44,182 - octoprint.server.util.flask - INFO - Passively logging in user will from 192.168.86.26 2024-05-28 22:46:44,183 - octoprint.access.users - INFO - Logged in user: will 2024-05-28 22:46:44,213 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity changed from offline to online 2024-05-28 22:46:44,332 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2024-05-28 22:46:44,426 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2024-05-28 22:46:44,535 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'http://192.168.86.26/', 'path': '/', 'query_string': 'l10n=en'} 2024-05-28 22:46:44,623 - octoprint.server.util.sockjs - INFO - New connection from client: 192.168.86.26 2024-05-28 22:46:44,687 - octoprint.server.util.sockjs - INFO - User will logged in on the socket from client 192.168.86.26 2024-05-28 22:46:44,852 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 8, 'printer_state': 'DETECT_SERIAL'} 2024-05-28 22:46:45,116 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2024-05-28 22:46:45,137 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2024-05-28 22:46:45,319 - octoprint.plugins.tracking - INFO - Sent tracking event pong, payload: {'version': '1.10.1', 'os': 'linux', 'bits': 32, 'python': '3.9.2', 'pip': '22.3', 'cores': 4, 'freq': 1800.0, 'ram': 1909604352, 'pi_model': 'Raspberry Pi 4 Model B Rev 1.5', 'octopi_version': '1.0.0', 'octopiuptodate_build': '1.0.0-1.10.1-20240514102430', 'plugins': 'ultimakerformatpackage:1.0.2,printtimegenius:2.3.3,octodashcompanion:0.0.7,displaylayerprogress:1.28.0', 'achievements': 'the_wizard'} 2024-05-28 22:46:45,652 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2024-05-28 22:46:45,762 - octoprint.plugins.tracking - INFO - Sent tracking event startup, payload: {'version': '1.10.1', 'os': 'linux', 'bits': 32, 'python': '3.9.2', 'pip': '22.3', 'cores': 4, 'freq': 1800.0, 'ram': 1909604352, 'pi_model': 'Raspberry Pi 4 Model B Rev 1.5', 'octopi_version': '1.0.0', 'octopiuptodate_build': '1.0.0-1.10.1-20240514102430'} 2024-05-28 22:46:47,145 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 250000 2024-05-28 22:46:47,152 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2024-05-28 22:46:47,175 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2024-05-28 22:46:47,231 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Operational" 2024-05-28 22:46:47,269 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2024-05-28 22:46:47,323 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin 2.1.3 MRiscoC Ender3V2-427-BLTUBL-T13-MPC, based on bugfix-2.1.x (Jan 27 2024 14:32:55)" 2024-05-28 22:46:47,323 - octoprint.util.comm - INFO - Firmware info line: FIRMWARE_NAME:Marlin 2.1.3 MRiscoC Ender3V2-427-BLTUBL-T13-MPC, based on bugfix-2.1.x (Jan 27 2024 14:32:55) SOURCE_CODE_URL:github.com/mriscoc/Ender3V2S1 PROTOCOL_VERSION:1.0 MACHINE_TYPE:Ender3V2-427-BLTUBL-T13-MPC EXTRUDER_COUNT:1 UUID:cede2a2f-41a2-4748-9b12-c55c62f367ff 2024-05-28 22:46:47,400 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting 2024-05-28 22:46:47,418 - octoprint.util.comm - INFO - Firmware states that it supports emergency GCODEs to be sent without waiting for an acknowledgement first 2024-05-28 22:46:47,431 - octoprint.util.comm - INFO - Firmware states that it supports writing long filenames 2024-05-28 22:46:47,434 - octoprint.util.comm - INFO - Firmware states that it supports long filenames 2024-05-28 22:46:47,447 - octoprint.util.comm - INFO - Firmware sent the following capability report: SERIAL_XON_XOFF: not supported BINARY_FILE_TRANSFER: supported EEPROM: supported VOLUMETRIC: supported AUTOREPORT_POS: not supported AUTOREPORT_TEMP: supported PROGRESS: not supported PRINT_JOB: supported AUTOLEVEL: supported RUNOUT: supported Z_PROBE: supported LEVELING_DATA: supported BUILD_PERCENT: supported SOFTWARE_POWER: not supported TOGGLE_LIGHTS: not supported CASE_LIGHT_BRIGHTNESS: not supported EMERGENCY_PARSER: supported HOST_ACTION_COMMANDS: supported PROMPT_SUPPORT: supported SDCARD: supported MULTI_VOLUME: not supported REPEAT: not supported SD_WRITE: supported AUTOREPORT_SD_STATUS: not supported LONG_FILENAME: supported LFN_WRITE: supported CUSTOM_FIRMWARE_UPLOAD: supported EXTENDED_M20: supported THERMAL_PROTECTION: supported MOTION_MODES: not supported ARCS: supported BABYSTEPPING: supported EP_BABYSTEP: not supported CHAMBER_TEMPERATURE: not supported COOLER_TEMPERATURE: not supported MEATPACK: not supported CONFIG_EXPORT: not supported 2024-05-28 22:46:47,816 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {'firmware_name': 'Marlin 2.1.3 MRiscoC Ender3V2-427-BLTUBL-T13-MPC, based on bugfix-2.1.x (Jan 27 2024 14:32:55)', 'printer_port': 'AUTO', 'printer_baudrate': 0} 2024-05-28 22:46:51,911 - octoprint.server.preemptive_cache - INFO - ... done in 7.38s 2024-05-29 17:48:29,670 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2024-05-29 17:48:30,112 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 17, 'printer_state': 'OPERATIONAL'} 2024-05-29 17:48:49,763 - octoprint.server.util.sockjs - INFO - New connection from client: 192.168.86.47 2024-05-29 17:48:49,850 - octoprint.server.util.flask - INFO - Passively logging in user will from 192.168.86.47 2024-05-29 17:48:49,852 - octoprint.access.users - INFO - Logged in user: will 2024-05-29 17:48:50,048 - octoprint.server.util.sockjs - INFO - User will logged in on the socket from client 192.168.86.47 2024-05-29 17:48:50,131 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json 2024-05-29 17:48:50,747 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2024-05-29 17:48:50,751 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://OctoPrint.local:80/', 'accessToken': '59ADA74C5C6D4B569D522D08FD1C4AFF'}, 'printer': {'name': 'Default', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 200, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 0, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 30, 'useM600': False}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': True}, 'spoolManager': {'enabled': False}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'icon': 'home', 'command': 'G28', 'color': '#dcdde1', 'confirm': False, 'exit': True}, {'icon': 'ruler-vertical', 'command': 'G29', 'color': '#4bae50', 'confirm': False, 'exit': True}, {'icon': 'fire-alt', 'command': 'M140 S50; M104 S185', 'color': '#e1b12c', 'confirm': False, 'exit': True}, {'icon': 'snowflake', 'command': 'M140 S0; M104 S0', 'color': '#0097e6', 'confirm': False, 'exit': True}, {'icon': 'redo-alt', 'command': '[!RELOAD]', 'color': '#7f8fa6', 'confirm': True, 'exit': False}, {'icon': 'power-off', 'command': '[!SHUTDOWN]', 'color': '#e84118', 'confirm': True, 'exit': False}], 'fileSorting': {'attribute': 'name', 'order': 'asc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': False, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2024-05-29 17:48:50,971 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2024-05-29 17:48:50,973 - octoprint.plugins.announcements - INFO - Loaded channel _important from https://octoprint.org/feeds/important.xml in 0.57s 2024-05-29 17:48:50,994 - octoprint.plugins.pluginmanager - INFO - Loaded plugin notices data from https://plugins.octoprint.org/notices.json 2024-05-29 17:48:51,015 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://OctoPrint.local:80/', 'accessToken': '59ADA74C5C6D4B569D522D08FD1C4AFF'}, 'printer': {'name': 'Default', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 200, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 0, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 30, 'useM600': False}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': True}, 'spoolManager': {'enabled': False}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'icon': 'home', 'command': 'G28', 'color': '#dcdde1', 'confirm': False, 'exit': True}, {'icon': 'ruler-vertical', 'command': 'G29', 'color': '#4bae50', 'confirm': False, 'exit': True}, {'icon': 'fire-alt', 'command': 'M140 S50; M104 S185', 'color': '#e1b12c', 'confirm': False, 'exit': True}, {'icon': 'snowflake', 'command': 'M140 S0; M104 S0', 'color': '#0097e6', 'confirm': False, 'exit': True}, {'icon': 'redo-alt', 'command': '[!RELOAD]', 'color': '#7f8fa6', 'confirm': True, 'exit': False}, {'icon': 'power-off', 'command': '[!SHUTDOWN]', 'color': '#e84118', 'confirm': True, 'exit': False}], 'fileSorting': {'attribute': 'name', 'order': 'asc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': False, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2024-05-29 17:48:51,825 - octoprint.plugins.announcements - INFO - Loaded channel _releases from https://octoprint.org/feeds/releases.xml in 0.59s 2024-05-29 17:48:52,735 - octoprint.plugins.announcements - INFO - Loaded channel _blog from https://octoprint.org/feeds/octoblog.xml in 0.59s 2024-05-29 17:48:53,160 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2024-05-29 17:48:53,162 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2024-05-29 17:48:53,162 - octoprint.util.pip - INFO - ==> pip ok -> yes 2024-05-29 17:48:53,194 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk 2024-05-29 17:48:53,544 - octoprint.plugins.announcements - INFO - Loaded channel _plugins from https://plugins.octoprint.org/feed.xml in 0.53s 2024-05-29 17:48:54,254 - octoprint.plugins.announcements - INFO - Loaded channel _octopi from https://octoprint.org/feeds/octopi.xml in 0.52s 2024-05-29 17:49:01,859 - octoprint.server.util.sockjs - INFO - User will logged out, logging out on socket 2024-05-29 17:49:01,861 - octoprint.access.users - INFO - Logged out user: will 2024-05-29 17:49:02,084 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2024-05-29 17:49:02,088 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://OctoPrint.local:80/', 'accessToken': '59ADA74C5C6D4B569D522D08FD1C4AFF'}, 'printer': {'name': 'Default', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 200, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 0, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 30, 'useM600': False}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': True}, 'spoolManager': {'enabled': False}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'icon': 'home', 'command': 'G28', 'color': '#dcdde1', 'confirm': False, 'exit': True}, {'icon': 'ruler-vertical', 'command': 'G29', 'color': '#4bae50', 'confirm': False, 'exit': True}, {'icon': 'fire-alt', 'command': 'M140 S50; M104 S185', 'color': '#e1b12c', 'confirm': False, 'exit': True}, {'icon': 'snowflake', 'command': 'M140 S0; M104 S0', 'color': '#0097e6', 'confirm': False, 'exit': True}, {'icon': 'redo-alt', 'command': '[!RELOAD]', 'color': '#7f8fa6', 'confirm': True, 'exit': False}, {'icon': 'power-off', 'command': '[!SHUTDOWN]', 'color': '#e84118', 'confirm': True, 'exit': False}], 'fileSorting': {'attribute': 'name', 'order': 'asc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': False, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2024-05-29 17:49:02,214 - octoprint.server.util.sockjs - INFO - Client connection closed: 192.168.86.47 2024-05-29 17:49:02,686 - octoprint.server.util.sockjs - INFO - New connection from client: 192.168.86.47 2024-05-29 17:49:07,449 - octoprint.access.users - INFO - Logged in user: will 2024-05-29 17:49:07,450 - octoprint.server.api - INFO - Actively logging in user will from 192.168.86.47 2024-05-29 17:49:07,511 - octoprint.server.util.flask - INFO - Passively logging in user will from 192.168.86.47 2024-05-29 17:49:07,511 - octoprint.access.users - INFO - Logged in user: will 2024-05-29 17:49:07,699 - octoprint.server.util.sockjs - INFO - Client connection closed: 192.168.86.47 2024-05-29 17:49:08,404 - octoprint.server.util.sockjs - INFO - New connection from client: 192.168.86.47 2024-05-29 17:49:08,460 - octoprint.server.util.flask - INFO - Passively logging in user will from 192.168.86.47 2024-05-29 17:49:08,461 - octoprint.access.users - INFO - Logged in user: will 2024-05-29 17:49:08,562 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2024-05-29 17:49:08,564 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://OctoPrint.local:80/', 'accessToken': '59ADA74C5C6D4B569D522D08FD1C4AFF'}, 'printer': {'name': 'Default', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 200, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 0, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 30, 'useM600': False}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': True}, 'spoolManager': {'enabled': False}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'icon': 'home', 'command': 'G28', 'color': '#dcdde1', 'confirm': False, 'exit': True}, {'icon': 'ruler-vertical', 'command': 'G29', 'color': '#4bae50', 'confirm': False, 'exit': True}, {'icon': 'fire-alt', 'command': 'M140 S50; M104 S185', 'color': '#e1b12c', 'confirm': False, 'exit': True}, {'icon': 'snowflake', 'command': 'M140 S0; M104 S0', 'color': '#0097e6', 'confirm': False, 'exit': True}, {'icon': 'redo-alt', 'command': '[!RELOAD]', 'color': '#7f8fa6', 'confirm': True, 'exit': False}, {'icon': 'power-off', 'command': '[!SHUTDOWN]', 'color': '#e84118', 'confirm': True, 'exit': False}], 'fileSorting': {'attribute': 'name', 'order': 'asc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': False, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2024-05-29 17:49:08,678 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2024-05-29 17:49:08,679 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://OctoPrint.local:80/', 'accessToken': '59ADA74C5C6D4B569D522D08FD1C4AFF'}, 'printer': {'name': 'Default', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 200, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 0, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 30, 'useM600': False}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': True}, 'spoolManager': {'enabled': False}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'icon': 'home', 'command': 'G28', 'color': '#dcdde1', 'confirm': False, 'exit': True}, {'icon': 'ruler-vertical', 'command': 'G29', 'color': '#4bae50', 'confirm': False, 'exit': True}, {'icon': 'fire-alt', 'command': 'M140 S50; M104 S185', 'color': '#e1b12c', 'confirm': False, 'exit': True}, {'icon': 'snowflake', 'command': 'M140 S0; M104 S0', 'color': '#0097e6', 'confirm': False, 'exit': True}, {'icon': 'redo-alt', 'command': '[!RELOAD]', 'color': '#7f8fa6', 'confirm': True, 'exit': False}, {'icon': 'power-off', 'command': '[!SHUTDOWN]', 'color': '#e84118', 'confirm': True, 'exit': False}], 'fileSorting': {'attribute': 'name', 'order': 'asc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': False, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2024-05-29 17:49:09,034 - octoprint.server.util.sockjs - INFO - User will logged in on the socket from client 192.168.86.47 2024-05-29 17:49:10,015 - octoprint.plugins.tracking - INFO - Sent tracking event webui_load, payload: {'browser_name': 'Chrome', 'browser_version': '124.0.0.0', 'os_name': 'Windows', 'os_version': '10'} 2024-05-29 17:49:37,547 - octoprint.server.util.sockjs - INFO - New connection from client: 192.168.86.47 2024-05-29 17:56:44,066 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2024-05-29 17:56:44,068 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://OctoPrint.local:80/', 'accessToken': '59ADA74C5C6D4B569D522D08FD1C4AFF'}, 'printer': {'name': 'Default', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 200, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 0, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 30, 'useM600': False}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': True}, 'spoolManager': {'enabled': False}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'icon': 'home', 'command': 'G28', 'color': '#dcdde1', 'confirm': False, 'exit': True}, {'icon': 'ruler-vertical', 'command': 'G29', 'color': '#4bae50', 'confirm': False, 'exit': True}, {'icon': 'fire-alt', 'command': 'M140 S50; M104 S185', 'color': '#e1b12c', 'confirm': False, 'exit': True}, {'icon': 'snowflake', 'command': 'M140 S0; M104 S0', 'color': '#0097e6', 'confirm': False, 'exit': True}, {'icon': 'redo-alt', 'command': '[!RELOAD]', 'color': '#7f8fa6', 'confirm': True, 'exit': False}, {'icon': 'power-off', 'command': '[!SHUTDOWN]', 'color': '#e84118', 'confirm': True, 'exit': False}], 'fileSorting': {'attribute': 'name', 'order': 'asc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': False, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2024-05-29 17:56:44,260 - octoprint.server.util.sockjs - INFO - Client connection closed: 192.168.86.47 2024-05-29 17:56:44,647 - octoprint.server.util.sockjs - INFO - New connection from client: 192.168.86.47 2024-05-29 17:56:49,027 - octoprint.access.users - INFO - Logged in user: will 2024-05-29 17:56:49,029 - octoprint.server.api - INFO - Actively logging in user will from 192.168.86.47 2024-05-29 17:56:49,310 - octoprint.server.util.flask - INFO - Passively logging in user will from 192.168.86.47 2024-05-29 17:56:49,310 - octoprint.access.users - INFO - Logged in user: will 2024-05-29 17:56:49,456 - octoprint.server.util.sockjs - INFO - Client connection closed: 192.168.86.47 2024-05-29 17:56:49,843 - octoprint.server.util.sockjs - INFO - New connection from client: 192.168.86.47 2024-05-29 17:56:49,887 - octoprint.server.util.flask - INFO - Passively logging in user will from 192.168.86.47 2024-05-29 17:56:49,887 - octoprint.access.users - INFO - Logged in user: will 2024-05-29 17:56:49,987 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2024-05-29 17:56:49,989 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://OctoPrint.local:80/', 'accessToken': '59ADA74C5C6D4B569D522D08FD1C4AFF'}, 'printer': {'name': 'Default', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 200, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 0, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 30, 'useM600': False}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': True}, 'spoolManager': {'enabled': False}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'icon': 'home', 'command': 'G28', 'color': '#dcdde1', 'confirm': False, 'exit': True}, {'icon': 'ruler-vertical', 'command': 'G29', 'color': '#4bae50', 'confirm': False, 'exit': True}, {'icon': 'fire-alt', 'command': 'M140 S50; M104 S185', 'color': '#e1b12c', 'confirm': False, 'exit': True}, {'icon': 'snowflake', 'command': 'M140 S0; M104 S0', 'color': '#0097e6', 'confirm': False, 'exit': True}, {'icon': 'redo-alt', 'command': '[!RELOAD]', 'color': '#7f8fa6', 'confirm': True, 'exit': False}, {'icon': 'power-off', 'command': '[!SHUTDOWN]', 'color': '#e84118', 'confirm': True, 'exit': False}], 'fileSorting': {'attribute': 'name', 'order': 'asc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': False, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2024-05-29 17:56:50,106 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2024-05-29 17:56:50,108 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://OctoPrint.local:80/', 'accessToken': '59ADA74C5C6D4B569D522D08FD1C4AFF'}, 'printer': {'name': 'Default', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 200, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 0, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 30, 'useM600': False}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': True}, 'spoolManager': {'enabled': False}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'icon': 'home', 'command': 'G28', 'color': '#dcdde1', 'confirm': False, 'exit': True}, {'icon': 'ruler-vertical', 'command': 'G29', 'color': '#4bae50', 'confirm': False, 'exit': True}, {'icon': 'fire-alt', 'command': 'M140 S50; M104 S185', 'color': '#e1b12c', 'confirm': False, 'exit': True}, {'icon': 'snowflake', 'command': 'M140 S0; M104 S0', 'color': '#0097e6', 'confirm': False, 'exit': True}, {'icon': 'redo-alt', 'command': '[!RELOAD]', 'color': '#7f8fa6', 'confirm': True, 'exit': False}, {'icon': 'power-off', 'command': '[!SHUTDOWN]', 'color': '#e84118', 'confirm': True, 'exit': False}], 'fileSorting': {'attribute': 'name', 'order': 'asc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': False, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2024-05-29 17:56:50,438 - octoprint.server.util.sockjs - INFO - User will logged in on the socket from client 192.168.86.47 2024-05-29 17:56:51,370 - octoprint.plugins.tracking - INFO - Sent tracking event webui_load, payload: {'browser_name': 'Chrome', 'browser_version': '124.0.0.0', 'os_name': 'Windows', 'os_version': '10'} 2024-05-29 18:02:37,510 - octoprint.server.util.sockjs - INFO - User will logged out, logging out on socket 2024-05-29 18:02:37,513 - octoprint.access.users - INFO - Logged out user: will 2024-05-29 18:02:37,642 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2024-05-29 18:02:37,676 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://OctoPrint.local:80/', 'accessToken': '59ADA74C5C6D4B569D522D08FD1C4AFF'}, 'printer': {'name': 'Default', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 200, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 0, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 30, 'useM600': False}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': True}, 'spoolManager': {'enabled': False}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'icon': 'home', 'command': 'G28', 'color': '#dcdde1', 'confirm': False, 'exit': True}, {'icon': 'ruler-vertical', 'command': 'G29', 'color': '#4bae50', 'confirm': False, 'exit': True}, {'icon': 'fire-alt', 'command': 'M140 S50; M104 S185', 'color': '#e1b12c', 'confirm': False, 'exit': True}, {'icon': 'snowflake', 'command': 'M140 S0; M104 S0', 'color': '#0097e6', 'confirm': False, 'exit': True}, {'icon': 'redo-alt', 'command': '[!RELOAD]', 'color': '#7f8fa6', 'confirm': True, 'exit': False}, {'icon': 'power-off', 'command': '[!SHUTDOWN]', 'color': '#e84118', 'confirm': True, 'exit': False}], 'fileSorting': {'attribute': 'name', 'order': 'asc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': False, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2024-05-29 18:02:37,764 - octoprint.server.util.sockjs - INFO - Client connection closed: 192.168.86.47 2024-05-29 18:02:38,138 - octoprint.server.util.sockjs - INFO - New connection from client: 192.168.86.47 2024-05-29 18:02:45,419 - octoprint.access.users - INFO - Logged in user: will 2024-05-29 18:02:45,420 - octoprint.server.api - INFO - Actively logging in user will from 192.168.86.47 2024-05-29 18:02:45,477 - octoprint.server.util.flask - INFO - Passively logging in user will from 192.168.86.47 2024-05-29 18:02:45,477 - octoprint.access.users - INFO - Logged in user: will 2024-05-29 18:02:45,644 - octoprint.server.util.sockjs - INFO - Client connection closed: 192.168.86.47 2024-05-29 18:02:45,938 - octoprint.server.util.sockjs - INFO - New connection from client: 192.168.86.47 2024-05-29 18:02:46,000 - octoprint.server.util.flask - INFO - Passively logging in user will from 192.168.86.47 2024-05-29 18:02:46,000 - octoprint.access.users - INFO - Logged in user: will 2024-05-29 18:02:46,100 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2024-05-29 18:02:46,101 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://OctoPrint.local:80/', 'accessToken': '59ADA74C5C6D4B569D522D08FD1C4AFF'}, 'printer': {'name': 'Default', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 200, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 0, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 30, 'useM600': False}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': True}, 'spoolManager': {'enabled': False}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'icon': 'home', 'command': 'G28', 'color': '#dcdde1', 'confirm': False, 'exit': True}, {'icon': 'ruler-vertical', 'command': 'G29', 'color': '#4bae50', 'confirm': False, 'exit': True}, {'icon': 'fire-alt', 'command': 'M140 S50; M104 S185', 'color': '#e1b12c', 'confirm': False, 'exit': True}, {'icon': 'snowflake', 'command': 'M140 S0; M104 S0', 'color': '#0097e6', 'confirm': False, 'exit': True}, {'icon': 'redo-alt', 'command': '[!RELOAD]', 'color': '#7f8fa6', 'confirm': True, 'exit': False}, {'icon': 'power-off', 'command': '[!SHUTDOWN]', 'color': '#e84118', 'confirm': True, 'exit': False}], 'fileSorting': {'attribute': 'name', 'order': 'asc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': False, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2024-05-29 18:02:46,304 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2024-05-29 18:02:46,306 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://OctoPrint.local:80/', 'accessToken': '59ADA74C5C6D4B569D522D08FD1C4AFF'}, 'printer': {'name': 'Default', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 200, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 0, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 30, 'useM600': False}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': True}, 'spoolManager': {'enabled': False}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'icon': 'home', 'command': 'G28', 'color': '#dcdde1', 'confirm': False, 'exit': True}, {'icon': 'ruler-vertical', 'command': 'G29', 'color': '#4bae50', 'confirm': False, 'exit': True}, {'icon': 'fire-alt', 'command': 'M140 S50; M104 S185', 'color': '#e1b12c', 'confirm': False, 'exit': True}, {'icon': 'snowflake', 'command': 'M140 S0; M104 S0', 'color': '#0097e6', 'confirm': False, 'exit': True}, {'icon': 'redo-alt', 'command': '[!RELOAD]', 'color': '#7f8fa6', 'confirm': True, 'exit': False}, {'icon': 'power-off', 'command': '[!SHUTDOWN]', 'color': '#e84118', 'confirm': True, 'exit': False}], 'fileSorting': {'attribute': 'name', 'order': 'asc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': False, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2024-05-29 18:02:46,569 - octoprint.server.util.sockjs - INFO - User will logged in on the socket from client 192.168.86.47 2024-05-29 18:02:47,549 - octoprint.plugins.tracking - INFO - Sent tracking event webui_load, payload: {'browser_name': 'Chrome', 'browser_version': '124.0.0.0', 'os_name': 'Windows', 'os_version': '10'} 2024-05-29 18:02:59,278 - octoprint.plugins.pluginmanager - INFO - Installing plugin from https://github.com/QuinnDamerell/OctoPrint-OctoEverywhere/archive/master.zip 2024-05-29 18:03:20,542 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2024-05-29 18:03:20,711 - octoprint.plugin.core - INFO - Found 25 plugin(s) providing 24 mixin implementations, 61 hook handlers 2024-05-29 18:03:20,713 - octoprint.plugin.core - INFO - 25 plugin(s) registered with the system: | Achievements Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/achievements | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/appkeys | Backup & Restore (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/backup | Classic Webcam (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/classicwebcam | Core Wizard (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/corewizard | Cura Thumbnails (1.0.2) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_ultimakerformatpackage | Discovery (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/discovery | DisplayLayerProgress Plugin (1.28.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_DisplayLayerProgress | Error Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/errortracking | Event Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/eventmanager | File Check (2024.3.27) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_file_check | Firmware Check (2021.10.11) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmware_check | GCode Viewer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/gcodeviewer | Logging (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/logging | OctoDash Companion (0.0.7) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_octodashcompanion | !OctoEverywhere! (3.3.5) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_octoeverywhere | Pi Support Plugin (2023.10.10) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/pluginmanager | PrintTimeGenius Plugin (2.3.3) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_PrintTimeGenius | Software Update (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/softwareupdate | Virtual Printer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2024-05-29 18:03:20,714 - octoprint.plugins.pluginmanager - INFO - The plugin was installed successfully: OctoEverywhere!, version 3.3.5 2024-05-29 18:03:20,726 - octoprint.plugins.achievements - INFO - New achievement unlocked: The Adventurer! 2024-05-29 18:03:21,146 - octoprint.plugins.tracking - INFO - Sent tracking event install_plugin, payload: {'plugin': 'octoeverywhere', 'plugin_version': '3.3.5'} 2024-05-29 18:03:21,567 - octoprint.plugins.tracking - INFO - Sent tracking event achievement_unlocked, payload: {'achievement': 'adventurer'} 2024-05-29 18:03:26,107 - octoprint.server.api.system - INFO - Performing command for core:restart: sudo service octoprint restart 2024-05-29 18:03:28,150 - octoprint.startup - INFO - ****************************************************************************** 2024-05-29 18:03:28,153 - octoprint.startup - INFO - Starting OctoPrint 1.10.1 2024-05-29 18:03:28,153 - octoprint.startup - INFO - ****************************************************************************** 2024-05-29 18:03:28,388 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity changed from offline to online 2024-05-29 18:03:28,436 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: online 2024-05-29 18:03:28,437 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 8.8.8.8:53 is working 2024-05-29 18:03:28,437 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is working 2024-05-29 18:03:28,956 - octoprint.startup - INFO - Blacklist processing done, adding 3 blacklisted plugin versions: roomtemp (any), GcodeEditor (>=0.1.1,<=0.2.8), gcodeleveling (>=0.1.0,<=0.1.1) 2024-05-29 18:03:28,964 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2024-05-29 18:03:31,234 - octoprint.startup - INFO - Added settings overlay from plugin octodashcompanion 2024-05-29 18:03:31,238 - octoprint.plugin.core - INFO - Found 25 plugin(s) providing 25 mixin implementations, 67 hook handlers 2024-05-29 18:03:31,246 - octoprint.server.heartbeat - INFO - Starting server heartbeat, 900.0s interval 2024-05-29 18:03:31,329 - octoprint.server - INFO - Intermediary server started 2024-05-29 18:03:31,346 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/pi/.octoprint/uploads... 2024-05-29 18:03:31,348 - octoprint.filemanager.storage - INFO - ... file metadata for /home/pi/.octoprint/uploads initialized successfully. 2024-05-29 18:03:31,351 - octoprint.server - INFO - Added new permission from plugin achievements: PLUGIN_ACHIEVEMENTS_VIEW (needs: "Need(method='role', value='plugin_achievements_view')") 2024-05-29 18:03:31,352 - octoprint.server - INFO - Added new permission from plugin achievements: PLUGIN_ACHIEVEMENTS_RESET (needs: "Need(method='role', value='plugin_achievements_reset')") 2024-05-29 18:03:31,352 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_SHOW (needs: "Need(method='role', value='plugin_action_command_notification_show')") 2024-05-29 18:03:31,352 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_CLEAR (needs: "Need(method='role', value='plugin_action_command_notification_clear')") 2024-05-29 18:03:31,353 - octoprint.server - INFO - Added new permission from plugin action_command_prompt: PLUGIN_ACTION_COMMAND_PROMPT_INTERACT (needs: "Need(method='role', value='plugin_action_command_prompt_interact')") 2024-05-29 18:03:31,353 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_READ (needs: "Need(method='role', value='plugin_announcements_read')") 2024-05-29 18:03:31,353 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_MANAGE (needs: "Need(method='role', value='plugin_announcements_read'), Need(method='role', value='plugin_announcements_manage')") 2024-05-29 18:03:31,354 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_ADMIN (needs: "Need(method='role', value='plugin_appkeys_admin')") 2024-05-29 18:03:31,354 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_GRANT (needs: "Need(method='role', value='plugin_appkeys_user')") 2024-05-29 18:03:31,354 - octoprint.server - INFO - Added new permission from plugin backup: PLUGIN_BACKUP_CREATE (needs: "Need(method='role', value='plugin_backup_create')") 2024-05-29 18:03:31,354 - octoprint.server - INFO - Added new permission from plugin file_check: PLUGIN_FILE_CHECK_RUN (needs: "Need(method='role', value='plugin_file_check_run')") 2024-05-29 18:03:31,355 - octoprint.server - INFO - Added new permission from plugin firmware_check: PLUGIN_FIRMWARE_CHECK_DISPLAY (needs: "Need(method='role', value='plugin_firmware_check_display')") 2024-05-29 18:03:31,355 - octoprint.server - INFO - Added new permission from plugin logging: PLUGIN_LOGGING_MANAGE (needs: "Need(method='role', value='plugin_logging_manage')") 2024-05-29 18:03:31,355 - octoprint.server - INFO - Added new permission from plugin octodashcompanion: PLUGIN_OCTODASHCOMPANION_MANAGEBACKUPS (needs: "Need(method='role', value='plugin_octodashcompanion_admin')") 2024-05-29 18:03:31,355 - octoprint.server - INFO - Added new permission from plugin pi_support: PLUGIN_PI_SUPPORT_STATUS (needs: "Need(method='role', value='plugin_pi_support_check')") 2024-05-29 18:03:31,356 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_LIST (needs: "Need(method='role', value='plugin_pluginmanager_list')") 2024-05-29 18:03:31,356 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_MANAGE (needs: "Need(method='role', value='plugin_pluginmanager_manage')") 2024-05-29 18:03:31,356 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_INSTALL (needs: "Need(method='role', value='plugin_pluginmanager_install'), Need(method='role', value='plugin_pluginmanager_manage')") 2024-05-29 18:03:31,356 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CHECK (needs: "Need(method='role', value='plugin_softwareupdate_check')") 2024-05-29 18:03:31,357 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_UPDATE (needs: "Need(method='role', value='plugin_softwareupdate_update')") 2024-05-29 18:03:31,358 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CONFIGURE (needs: "Need(method='role', value='plugin_softwareupdate_configure')") 2024-05-29 18:03:31,372 - octoprint.printer.standard - INFO - Using print time estimator provided by PrintTimeGenius 2024-05-29 18:03:32,253 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2024-05-29 18:03:33,089 - octoprint.util.pip - INFO - Version of pip is 22.3 2024-05-29 18:03:33,095 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2024-05-29 18:03:33,095 - octoprint.util.pip - INFO - ==> pip ok -> yes 2024-05-29 18:03:33,120 - octoprint.plugins.achievements - INFO - Loading data from /home/pi/.octoprint/data/achievements/data.json 2024-05-29 18:03:33,123 - octoprint.plugins.achievements - INFO - Loading data for None from /home/pi/.octoprint/data/achievements/2024.json 2024-05-29 18:03:33,185 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk 2024-05-29 18:03:33,253 - octoprint.plugins.file_check - INFO - Native grep available: True 2024-05-29 18:03:33,283 - octoprint.plugin.core - INFO - Initialized 25 plugin implementation(s) 2024-05-29 18:03:33,310 - octoprint - INFO - Installing webcam compat overlay for configured default webcam 2024-05-29 18:03:33,311 - octoprint.plugin.core - INFO - 25 plugin(s) registered with the system: | Achievements Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/achievements | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/appkeys | Backup & Restore (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/backup | Classic Webcam (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/classicwebcam | Core Wizard (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/corewizard | Cura Thumbnails (1.0.2) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_ultimakerformatpackage | Discovery (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/discovery | DisplayLayerProgress Plugin (1.28.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_DisplayLayerProgress | Error Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/errortracking | Event Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/eventmanager | File Check (2024.3.27) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_file_check | Firmware Check (2021.10.11) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmware_check | GCode Viewer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/gcodeviewer | Logging (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/logging | OctoDash Companion (0.0.7) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_octodashcompanion | OctoEverywhere! (3.3.5) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_octoeverywhere | Pi Support Plugin (2023.10.10) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/pluginmanager | PrintTimeGenius Plugin (2.3.3) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_PrintTimeGenius | Software Update (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/softwareupdate | Virtual Printer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2024-05-29 18:03:33,337 - octoprint.environment - INFO - Detected environment is Python 3.9.2 under Linux (linux). Details: | hardware: | cores: 4 | freq: 1800.0 | ram: 1909604352 | os: | bits: 32 | id: linux | platform: linux | plugins: | pi_support: | model: Raspberry Pi 4 Model B Rev 1.5 | octopi_camera_stack: camera-streamer | octopi_version: 1.0.0 | octopiuptodate_build: 1.0.0-1.10.1-20240514102430 | octopiuptodate_build_short: 2024.05.14.102430 | throttle_check_enabled: true | throttle_check_functional: true | throttle_state: '0x0' | python: | pip: '22.3' | version: 3.9.2 | virtualenv: /home/pi/oprint 2024-05-29 18:03:33,351 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/webassets... 2024-05-29 18:03:33,351 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-cache... 2024-05-29 18:03:33,352 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-manifest.json... 2024-05-29 18:03:33,418 - octoprint.plugins.DisplayLayerProgress - WARNING - The Blueprint of this plugin is relying on the default implementation of is_blueprint_csrf_protected (newly added in OctoPrint 1.8.3), which in a future version will be switched from False to True for security reasons. Plugin authors should ensure they explicitly declare the CSRF protection status in their BlueprintPlugin mixin implementation. Recommendation is to enable CSRF protection and exempt views that must not use it with the octoprint.plugin.BlueprintPlugin.csrf_exempt decorator. 2024-05-29 18:03:33,418 - octoprint.server - WARNING - CSRF Protection for Blueprint of plugin DisplayLayerProgress is DISABLED 2024-05-29 18:03:33,421 - octoprint.plugins.octodashcompanion - WARNING - The Blueprint of this plugin is relying on the default implementation of is_blueprint_csrf_protected (newly added in OctoPrint 1.8.3), which in a future version will be switched from False to True for security reasons. Plugin authors should ensure they explicitly declare the CSRF protection status in their BlueprintPlugin mixin implementation. Recommendation is to enable CSRF protection and exempt views that must not use it with the octoprint.plugin.BlueprintPlugin.csrf_exempt decorator. 2024-05-29 18:03:33,422 - octoprint.server - WARNING - CSRF Protection for Blueprint of plugin octodashcompanion is DISABLED 2024-05-29 18:03:33,693 - octoprint.server - INFO - Shutting down intermediary server... 2024-05-29 18:03:33,873 - octoprint.server - INFO - Intermediary server shut down 2024-05-29 18:03:33,875 - octoprint.events - INFO - Processing startup event, this is our first event 2024-05-29 18:03:33,876 - octoprint.events - INFO - Adding 2 events to queue that were held back before startup event 2024-05-29 18:03:33,877 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue... 2024-05-29 18:03:33,881 - octoprint.server - INFO - Autoconnect on startup is configured, trying to connect to the printer... 2024-05-29 18:03:33,992 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json 2024-05-29 18:03:34,019 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue 2024-05-29 18:03:34,043 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2024-05-29 18:03:34,066 - octoprint.server - INFO - Trying to connect to configured serial port AUTO 2024-05-29 18:03:34,234 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2024-05-29 18:03:34,276 - octoprint.server - INFO - Starting autorefresh of serial port list 2024-05-29 18:03:34,291 - octoprint.server - INFO - Autorefresh of serial port list stopped 2024-05-29 18:03:34,348 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder... 2024-05-29 18:03:34,351 - octoprint.server.util.watchdog - INFO - ... initial scan done. 2024-05-29 18:03:34,375 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 7 port/baudrate candidates: /dev/ttyUSB0@115200, /dev/ttyUSB0@250000, /dev/ttyUSB0@230400, /dev/ttyUSB0@57600, /dev/ttyUSB0@38400, /dev/ttyUSB0@19200, /dev/ttyUSB0@9600 2024-05-29 18:03:34,375 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200 2024-05-29 18:03:34,376 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200 2024-05-29 18:03:34,473 - octoprint.plugins.tracking - INFO - Sent tracking event system_unthrottled, payload: {'throttled_now': False, 'throttled_past': False, 'throttled_mask': 0, 'throttled_voltage_now': False, 'throttled_voltage_past': False, 'throttled_overheat_now': False, 'throttled_overheat_past': False} 2024-05-29 18:03:34,484 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2024-05-29 18:03:34,513 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2024-05-29 18:03:35,172 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2024-05-29 18:03:35,397 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on OctoPrint._http._tcp.local.' for _http._tcp.local. 2024-05-29 18:03:35,983 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2024-05-29 18:03:35,985 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2024-05-29 18:03:35,986 - octoprint.util.pip - INFO - ==> pip ok -> yes 2024-05-29 18:03:36,022 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk 2024-05-29 18:03:36,211 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on OctoPrint._octoprint._tcp.local.' for _octoprint._tcp.local. 2024-05-29 18:03:36,218 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance on OctoPrint for SSDP 2024-05-29 18:03:36,246 - octoprint.plugins.octoeverywhere - INFO - OctoPrint host:127.0.0.1 port:5000 2024-05-29 18:03:36,975 - octoprint.plugins.octoeverywhere - INFO - No printer id found, regenerating. 2024-05-29 18:03:36,980 - octoprint.plugins.octoeverywhere - INFO - New printer id is: OK7D9EEK5F8TJV14L8TGAFBZT61MPHW8ILWCVHTE13CQRLG8XXF4R0KJ5U5X 2024-05-29 18:03:36,993 - octoprint.plugins.octoeverywhere - INFO - Value AddPrinterUrl has changed so we are updating the value in settings and saving. 2024-05-29 18:03:37,068 - octoprint.plugins.octoeverywhere - INFO - Value PrinterKey has changed so we are updating the value in settings and saving. 2024-05-29 18:03:37,143 - octoprint.plugins.octoeverywhere - INFO - No private key found, regenerating. 2024-05-29 18:03:37,157 - octoprint.plugins.octoeverywhere - INFO - Value Pid has changed so we are updating the value in settings and saving. 2024-05-29 18:03:37,233 - octoprint.plugins.octoeverywhere - INFO - Value PluginVersion has changed so we are updating the value in settings and saving. 2024-05-29 18:03:37,299 - octoprint.plugins.octoeverywhere - INFO - OctoPingPong stats reset 2024-05-29 18:03:37,301 - octoprint.plugins.octoeverywhere - INFO - PingPong has detected a first time run. Updating latency stats now. 2024-05-29 18:03:37,303 - octoprint.plugins.octoeverywhere - INFO - MDns cache file reset 2024-05-29 18:03:37,306 - octoprint.server - INFO - Listening on http://127.0.0.1:5000 2024-05-29 18:03:37,362 - octoprint.plugins.octoeverywhere - INFO - IPV4 - starport:142.93.152.110 main:104.26.3.58 2024-05-29 18:03:37,363 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2024-05-29 18:03:37,410 - octoprint.plugins.octoeverywhere - INFO - Failed to resolve host ipv6 name [Errno -2] Name or service not known 2024-05-29 18:03:37,468 - octoprint.server.util.flask - INFO - Passively logging in user will from 192.168.86.26 2024-05-29 18:03:37,469 - octoprint.access.users - INFO - Logged in user: will 2024-05-29 18:03:37,589 - octoprint.server.util.sockjs - INFO - New connection from client: 192.168.86.47 2024-05-29 18:03:37,702 - octoprint.server.util.sockjs - INFO - New connection from client: 192.168.86.47 2024-05-29 18:03:38,005 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2024-05-29 18:03:38,037 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2024-05-29 18:03:38,359 - octoprint.server.util.sockjs - INFO - New connection from client: 192.168.86.26 2024-05-29 18:03:38,367 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2024-05-29 18:03:38,398 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2024-05-29 18:03:38,398 - octoprint.util.pip - INFO - ==> pip ok -> yes 2024-05-29 18:03:38,387 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2024-05-29 18:03:38,417 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://OctoPrint.local:80/', 'accessToken': '59ADA74C5C6D4B569D522D08FD1C4AFF'}, 'printer': {'name': 'Default', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 200, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 0, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 30, 'useM600': False}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': True}, 'spoolManager': {'enabled': False}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'icon': 'home', 'command': 'G28', 'color': '#dcdde1', 'confirm': False, 'exit': True}, {'icon': 'ruler-vertical', 'command': 'G29', 'color': '#4bae50', 'confirm': False, 'exit': True}, {'icon': 'fire-alt', 'command': 'M140 S50; M104 S185', 'color': '#e1b12c', 'confirm': False, 'exit': True}, {'icon': 'snowflake', 'command': 'M140 S0; M104 S0', 'color': '#0097e6', 'confirm': False, 'exit': True}, {'icon': 'redo-alt', 'command': '[!RELOAD]', 'color': '#7f8fa6', 'confirm': True, 'exit': False}, {'icon': 'power-off', 'command': '[!SHUTDOWN]', 'color': '#e84118', 'confirm': True, 'exit': False}], 'fileSorting': {'attribute': 'name', 'order': 'asc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': False, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2024-05-29 18:03:38,417 - octoprint.server.util.sockjs - INFO - User will logged in on the socket from client 192.168.86.26 2024-05-29 18:03:38,418 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 53.4GB. That is considered sufficient for updating. 2024-05-29 18:03:38,683 - octoprint.plugins.octoeverywhere - INFO - Value NoAccountConnectedLastInformDateTime has changed so we are updating the value in settings and saving. 2024-05-29 18:03:38,810 - octoprint.plugins.octoeverywhere - INFO - After startup called. Starting worker thread. 2024-05-29 18:03:38,830 - octoprint.plugins.octoeverywhere - INFO - Main thread starting 2024-05-29 18:03:38,893 - octoprint.plugins.octoeverywhere - INFO - Frontend http port detected as 80, is https? False 2024-05-29 18:03:38,935 - octoprint.plugins.octoeverywhere - INFO - Attempting to talk to OctoEverywhere, server con wss://starport-v1.octoeverywhere.com/octoclientws[1] wsId:2944417976 2024-05-29 18:03:39,131 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'http://192.168.86.26/', 'path': '/', 'query_string': 'l10n=en'} 2024-05-29 18:03:39,189 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 8, 'printer_state': 'DETECT_SERIAL'} 2024-05-29 18:03:39,239 - octoprint.plugins.octoeverywhere - INFO - Connected To OctoEverywhere, server con wss://starport-v1.octoeverywhere.com/octoclientws[1]. Starting handshake... 2024-05-29 18:03:39,278 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2024-05-29 18:03:39,656 - octoprint.plugins.tracking - INFO - Sent tracking event pong, payload: {'version': '1.10.1', 'os': 'linux', 'bits': 32, 'python': '3.9.2', 'pip': '22.3', 'cores': 4, 'freq': 1800.0, 'ram': 1909604352, 'pi_model': 'Raspberry Pi 4 Model B Rev 1.5', 'octopi_version': '1.0.0', 'octopiuptodate_build': '1.0.0-1.10.1-20240514102430', 'plugins': 'ultimakerformatpackage:1.0.2,printtimegenius:2.3.3,octoeverywhere:3.3.5,octodashcompanion:0.0.7,displaylayerprogress:1.28.0', 'achievements': 'the_wizard,adventurer'} 2024-05-29 18:03:39,846 - octoprint.plugins.octoeverywhere - INFO - Handshake complete, server con wss://starport-v1.octoeverywhere.com/octoclientws[1], successfully connected to OctoEverywhere! 2024-05-29 18:03:39,870 - octoprint.plugins.octoeverywhere - INFO - Value HasConnectedAccounts has changed so we are updating the value in settings and saving. 2024-05-29 18:03:39,969 - octoprint.plugins.octoeverywhere - INFO - Value PluginUpdateRequired has changed so we are updating the value in settings and saving. 2024-05-29 18:03:40,124 - octoprint.plugins.tracking - INFO - Sent tracking event startup, payload: {'version': '1.10.1', 'os': 'linux', 'bits': 32, 'python': '3.9.2', 'pip': '22.3', 'cores': 4, 'freq': 1800.0, 'ram': 1909604352, 'pi_model': 'Raspberry Pi 4 Model B Rev 1.5', 'octopi_version': '1.0.0', 'octopiuptodate_build': '1.0.0-1.10.1-20240514102430'} 2024-05-29 18:03:41,511 - octoprint.server.util.flask - INFO - Passively logging in user will from 127.0.0.1 2024-05-29 18:03:41,512 - octoprint.access.users - INFO - Logged in user: will 2024-05-29 18:03:42,015 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2024-05-29 18:03:42,045 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2024-05-29 18:03:42,385 - octoprint.server.util.sockjs - INFO - Client connection closed: 192.168.86.47 2024-05-29 18:03:42,472 - octoprint.server.util.flask.PreemptiveCache - INFO - Adding entry for / and {'path': '/', 'base_url': 'https://127.0.0.1:5000/', 'query_string': 'l10n=en', '_timestamp': 1717020222.4722476, '_count': 1} 2024-05-29 18:03:43,346 - octoprint.server.util.sockjs - INFO - New connection from client: 192.168.86.47 2024-05-29 18:03:46,023 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 250000 2024-05-29 18:03:46,039 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2024-05-29 18:03:46,051 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2024-05-29 18:03:46,060 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Operational" 2024-05-29 18:03:46,110 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2024-05-29 18:03:46,172 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin 2.1.3 MRiscoC Ender3V2-427-BLTUBL-T13-MPC, based on bugfix-2.1.x (Jan 27 2024 14:32:55)" 2024-05-29 18:03:46,173 - octoprint.util.comm - INFO - Firmware info line: FIRMWARE_NAME:Marlin 2.1.3 MRiscoC Ender3V2-427-BLTUBL-T13-MPC, based on bugfix-2.1.x (Jan 27 2024 14:32:55) SOURCE_CODE_URL:github.com/mriscoc/Ender3V2S1 PROTOCOL_VERSION:1.0 MACHINE_TYPE:Ender3V2-427-BLTUBL-T13-MPC EXTRUDER_COUNT:1 UUID:cede2a2f-41a2-4748-9b12-c55c62f367ff 2024-05-29 18:03:46,229 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting 2024-05-29 18:03:46,280 - octoprint.util.comm - INFO - Firmware states that it supports emergency GCODEs to be sent without waiting for an acknowledgement first 2024-05-29 18:03:46,327 - octoprint.util.comm - INFO - Firmware states that it supports writing long filenames 2024-05-29 18:03:46,330 - octoprint.util.comm - INFO - Firmware states that it supports long filenames 2024-05-29 18:03:46,382 - octoprint.util.comm - INFO - Firmware sent the following capability report: SERIAL_XON_XOFF: not supported BINARY_FILE_TRANSFER: supported EEPROM: supported VOLUMETRIC: supported AUTOREPORT_POS: not supported AUTOREPORT_TEMP: supported PROGRESS: not supported PRINT_JOB: supported AUTOLEVEL: supported RUNOUT: supported Z_PROBE: supported LEVELING_DATA: supported BUILD_PERCENT: supported SOFTWARE_POWER: not supported TOGGLE_LIGHTS: not supported CASE_LIGHT_BRIGHTNESS: not supported EMERGENCY_PARSER: supported HOST_ACTION_COMMANDS: supported PROMPT_SUPPORT: supported SDCARD: supported MULTI_VOLUME: not supported REPEAT: not supported SD_WRITE: supported AUTOREPORT_SD_STATUS: not supported LONG_FILENAME: supported LFN_WRITE: supported CUSTOM_FIRMWARE_UPLOAD: supported EXTENDED_M20: supported THERMAL_PROTECTION: supported MOTION_MODES: not supported ARCS: supported BABYSTEPPING: supported EP_BABYSTEP: not supported CHAMBER_TEMPERATURE: not supported COOLER_TEMPERATURE: not supported MEATPACK: not supported CONFIG_EXPORT: not supported 2024-05-29 18:03:46,668 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {'firmware_name': 'Marlin 2.1.3 MRiscoC Ender3V2-427-BLTUBL-T13-MPC, based on bugfix-2.1.x (Jan 27 2024 14:32:55)', 'printer_port': 'AUTO', 'printer_baudrate': 0} 2024-05-29 18:03:51,792 - octoprint.access.users - INFO - Logged in user: will 2024-05-29 18:03:51,794 - octoprint.server.api - INFO - Actively logging in user will from 192.168.86.47 2024-05-29 18:03:52,063 - octoprint.server.preemptive_cache - INFO - ... done in 12.93s 2024-05-29 18:03:52,884 - octoprint.server.util.flask - INFO - Passively logging in user will from 192.168.86.47 2024-05-29 18:03:52,884 - octoprint.access.users - INFO - Logged in user: will 2024-05-29 18:03:52,924 - octoprint.plugins.octoeverywhere - INFO - Slipstream took 14.067009687423706 to fully update the cache 2024-05-29 18:03:53,655 - octoprint.server.util.sockjs - INFO - Client connection closed: 192.168.86.47 2024-05-29 18:03:54,017 - octoprint.server.util.sockjs - INFO - New connection from client: 192.168.86.47 2024-05-29 18:03:54,060 - octoprint.server.util.flask - INFO - Passively logging in user will from 192.168.86.47 2024-05-29 18:03:54,061 - octoprint.access.users - INFO - Logged in user: will 2024-05-29 18:03:54,160 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2024-05-29 18:03:54,163 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://OctoPrint.local:80/', 'accessToken': '59ADA74C5C6D4B569D522D08FD1C4AFF'}, 'printer': {'name': 'Default', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 200, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 0, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 30, 'useM600': False}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': True}, 'spoolManager': {'enabled': False}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'icon': 'home', 'command': 'G28', 'color': '#dcdde1', 'confirm': False, 'exit': True}, {'icon': 'ruler-vertical', 'command': 'G29', 'color': '#4bae50', 'confirm': False, 'exit': True}, {'icon': 'fire-alt', 'command': 'M140 S50; M104 S185', 'color': '#e1b12c', 'confirm': False, 'exit': True}, {'icon': 'snowflake', 'command': 'M140 S0; M104 S0', 'color': '#0097e6', 'confirm': False, 'exit': True}, {'icon': 'redo-alt', 'command': '[!RELOAD]', 'color': '#7f8fa6', 'confirm': True, 'exit': False}, {'icon': 'power-off', 'command': '[!SHUTDOWN]', 'color': '#e84118', 'confirm': True, 'exit': False}], 'fileSorting': {'attribute': 'name', 'order': 'asc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': False, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2024-05-29 18:03:54,275 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2024-05-29 18:03:54,277 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://OctoPrint.local:80/', 'accessToken': '59ADA74C5C6D4B569D522D08FD1C4AFF'}, 'printer': {'name': 'Default', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 200, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 0, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 30, 'useM600': False}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': True}, 'spoolManager': {'enabled': False}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'icon': 'home', 'command': 'G28', 'color': '#dcdde1', 'confirm': False, 'exit': True}, {'icon': 'ruler-vertical', 'command': 'G29', 'color': '#4bae50', 'confirm': False, 'exit': True}, {'icon': 'fire-alt', 'command': 'M140 S50; M104 S185', 'color': '#e1b12c', 'confirm': False, 'exit': True}, {'icon': 'snowflake', 'command': 'M140 S0; M104 S0', 'color': '#0097e6', 'confirm': False, 'exit': True}, {'icon': 'redo-alt', 'command': '[!RELOAD]', 'color': '#7f8fa6', 'confirm': True, 'exit': False}, {'icon': 'power-off', 'command': '[!SHUTDOWN]', 'color': '#e84118', 'confirm': True, 'exit': False}], 'fileSorting': {'attribute': 'name', 'order': 'asc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': False, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2024-05-29 18:03:54,573 - octoprint.server.util.sockjs - INFO - User will logged in on the socket from client 192.168.86.47 2024-05-29 18:03:55,667 - octoprint.plugins.tracking - INFO - Sent tracking event webui_load, payload: {'browser_name': 'Chrome', 'browser_version': '124.0.0.0', 'os_name': 'Windows', 'os_version': '10'} 2024-05-29 18:05:21,673 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2024-05-29 18:05:21,683 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://OctoPrint.local:80/', 'accessToken': '59ADA74C5C6D4B569D522D08FD1C4AFF'}, 'printer': {'name': 'Default', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 200, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 0, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 30, 'useM600': False}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': True}, 'spoolManager': {'enabled': False}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'icon': 'home', 'command': 'G28', 'color': '#dcdde1', 'confirm': False, 'exit': True}, {'icon': 'ruler-vertical', 'command': 'G29', 'color': '#4bae50', 'confirm': False, 'exit': True}, {'icon': 'fire-alt', 'command': 'M140 S50; M104 S185', 'color': '#e1b12c', 'confirm': False, 'exit': True}, {'icon': 'snowflake', 'command': 'M140 S0; M104 S0', 'color': '#0097e6', 'confirm': False, 'exit': True}, {'icon': 'redo-alt', 'command': '[!RELOAD]', 'color': '#7f8fa6', 'confirm': True, 'exit': False}, {'icon': 'power-off', 'command': '[!SHUTDOWN]', 'color': '#e84118', 'confirm': True, 'exit': False}], 'fileSorting': {'attribute': 'name', 'order': 'asc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': False, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2024-05-29 18:05:21,713 - octoprint.server.util.sockjs - INFO - New connection from client: 127.0.0.1 2024-05-29 18:05:21,777 - octoprint.plugins.octoeverywhere - INFO - Web Stream ws [32] opened, attempt 1 after 0.2672560214996338 seconds 2024-05-29 18:05:21,780 - octoprint.plugins.octoeverywhere - INFO - Web Stream ws [32] first message sent to local server after 0.2708563804626465 seconds 2024-05-29 18:05:21,882 - octoprint.server.util.flask - INFO - Passively logging in user will from 127.0.0.1 2024-05-29 18:05:21,882 - octoprint.access.users - INFO - Logged in user: will 2024-05-29 18:05:21,954 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2024-05-29 18:05:21,959 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://OctoPrint.local:80/', 'accessToken': '59ADA74C5C6D4B569D522D08FD1C4AFF'}, 'printer': {'name': 'Default', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 200, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 0, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 30, 'useM600': False}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': True}, 'spoolManager': {'enabled': False}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'icon': 'home', 'command': 'G28', 'color': '#dcdde1', 'confirm': False, 'exit': True}, {'icon': 'ruler-vertical', 'command': 'G29', 'color': '#4bae50', 'confirm': False, 'exit': True}, {'icon': 'fire-alt', 'command': 'M140 S50; M104 S185', 'color': '#e1b12c', 'confirm': False, 'exit': True}, {'icon': 'snowflake', 'command': 'M140 S0; M104 S0', 'color': '#0097e6', 'confirm': False, 'exit': True}, {'icon': 'redo-alt', 'command': '[!RELOAD]', 'color': '#7f8fa6', 'confirm': True, 'exit': False}, {'icon': 'power-off', 'command': '[!SHUTDOWN]', 'color': '#e84118', 'confirm': True, 'exit': False}], 'fileSorting': {'attribute': 'name', 'order': 'asc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': False, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2024-05-29 18:05:22,128 - octoprint.server.util.sockjs - INFO - User will logged in on the socket from client 127.0.0.1 2024-05-29 18:05:22,145 - octoprint.plugins.octoeverywhere - INFO - Value NoAccountConnectedLastInformDateTime has changed so we are updating the value in settings and saving. 2024-05-29 18:05:22,450 - octoprint.plugins.octoeverywhere - INFO - Printer has owner: True 2024-05-29 18:05:22,451 - octoprint.plugins.octoeverywhere - INFO - Value HasConnectedAccounts has changed so we are updating the value in settings and saving. 2024-05-29 18:06:32,464 - octoprint.plugins.DisplayLayerProgress - INFO - Limit of 750 reached and no M117 INDICATOR-Layer found 2024-05-29 18:06:32,466 - octoprint.plugins.DisplayLayerProgress - INFO - FilePreProcessor. Checking LayerExpressions. 2024-05-29 18:06:32,466 - octoprint.plugins.DisplayLayerProgress - INFO - FilePreProcessor. LayerExpression valid. Start processing... 2024-05-29 18:06:33,548 - octoprint.filemanager.analysis - INFO - Starting analysis of local:Califlower v29_PLA_2h5m.gcode 2024-05-29 18:06:33,566 - octoprint.printer.standard.job - INFO - Print job selected - origin: local, path: Califlower v29_PLA_2h5m.gcode, owner: will, user: will 2024-05-29 18:06:33,651 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile 2024-05-29 18:06:33,665 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting" 2024-05-29 18:06:33,672 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: Califlower v29_PLA_2h5m.gcode, owner: will, user: will 2024-05-29 18:06:33,675 - octoprint.plugins.DisplayLayerProgress - INFO - Did NOT reading total height from MetaFile, because analyse was done for not selected file. Current: '-' Analyse for: 'Califlower v29_PLA_2h5m.gcode' 2024-05-29 18:06:33,726 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2024-05-29 18:06:33,745 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Printing" 2024-05-29 18:06:33,783 - octoprint.plugins.DisplayLayerProgress - INFO - File '/home/pi/.octoprint/uploads/Califlower v29_PLA_2h5m.gcode' selected. Determining number of layers. 2024-05-29 18:06:33,790 - octoprint.plugins.DisplayLayerProgress - INFO - Read total height from MetaFile 2024-05-29 18:06:33,800 - octoprint.plugins.DisplayLayerProgress - INFO - Total height not found in MetaFile 2024-05-29 18:06:34,278 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile 2024-05-29 18:06:34,298 - octoprint.plugins.DisplayLayerProgress - INFO - File select-event processing done!' 2024-05-29 18:06:34,365 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2024-05-29 18:06:34,525 - octoprint.plugins.DisplayLayerProgress - INFO - Printing started. Detailed progress started.{'name': 'Califlower v29_PLA_2h5m.gcode', 'path': 'Califlower v29_PLA_2h5m.gcode', 'origin': 'local', 'size': 2636173, 'owner': 'will', 'user': 'will'} 2024-05-29 18:06:34,745 - octoprint.plugins.octoeverywhere - INFO - Gadget is now watching! 2024-05-29 18:06:34,807 - octoprint.plugins.octoeverywhere - INFO - New print started; PrintId: szBRvwNExYS1eS0a7frgKZqtqVJcmxPRZtqx1iPcaFnH1bikEMl4kzjs8NsF file:Califlower v29_PLA_2h5m.gcode size:2574.3876953125 filament:0 2024-05-29 18:06:35,179 - octoprint.plugins.tracking - INFO - Sent tracking event print_started, payload: {'origin': 'local', 'file': 'bb0b001417cf5fbd3a01e06a12947778c325501c'} 2024-05-29 18:06:35,986 - octoprint.util.comm - INFO - Printer seems to support the busy protocol, will adjust timeouts and set busy interval accordingly 2024-05-29 18:06:36,071 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2024-05-29 18:06:36,385 - octoprint.filemanager.analysis - INFO - Analysis of entry local:Califlower v29_PLA_2h5m.gcode finished, needed 2.84s 2024-05-29 18:06:36,391 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile 2024-05-29 18:06:36,411 - octoprint.plugins.DisplayLayerProgress - INFO - Read total height from MetaFile 2024-05-29 18:06:36,433 - octoprint.plugins.octoeverywhere - INFO - NotificationsHandler successfully sent 'started' 2024-05-29 18:06:36,462 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile 2024-05-29 18:06:36,471 - octoprint.plugins.DisplayLayerProgress - INFO - Read total height from MetaFile 2024-05-29 18:06:44,000 - octoprint.util.comm - INFO - Telling the printer to set the busy interval to our "communicationBusy" timeout - 1s = 2s 2024-05-29 18:07:02,418 - octoprint.plugins.octoeverywhere - INFO - Web Stream ws [32] websocket closed after 100.90803170204163 seconds 2024-05-29 18:07:02,421 - octoprint.server.util.sockjs - INFO - Client connection closed: 127.0.0.1 2024-05-29 18:07:07,024 - octoprint.plugins.octoeverywhere - INFO - Gadget HostLock set to: gadget-nyc.octoeverywhere.com 2024-05-29 18:07:34,796 - octoprint.server.util.sockjs - INFO - New connection from client: 127.0.0.1 2024-05-29 18:07:34,809 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2024-05-29 18:07:34,831 - octoprint.plugins.octoeverywhere - INFO - Web Stream ws [76] opened, attempt 1 after 0.2894253730773926 seconds 2024-05-29 18:07:34,834 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://OctoPrint.local:80/', 'accessToken': '59ADA74C5C6D4B569D522D08FD1C4AFF'}, 'printer': {'name': 'Default', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 200, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 0, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 30, 'useM600': False}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': True}, 'spoolManager': {'enabled': False}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'icon': 'home', 'command': 'G28', 'color': '#dcdde1', 'confirm': False, 'exit': True}, {'icon': 'ruler-vertical', 'command': 'G29', 'color': '#4bae50', 'confirm': False, 'exit': True}, {'icon': 'fire-alt', 'command': 'M140 S50; M104 S185', 'color': '#e1b12c', 'confirm': False, 'exit': True}, {'icon': 'snowflake', 'command': 'M140 S0; M104 S0', 'color': '#0097e6', 'confirm': False, 'exit': True}, {'icon': 'redo-alt', 'command': '[!RELOAD]', 'color': '#7f8fa6', 'confirm': True, 'exit': False}, {'icon': 'power-off', 'command': '[!SHUTDOWN]', 'color': '#e84118', 'confirm': True, 'exit': False}], 'fileSorting': {'attribute': 'name', 'order': 'asc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': False, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2024-05-29 18:07:34,841 - octoprint.plugins.octoeverywhere - INFO - Web Stream ws [76] first message sent to local server after 0.29911160469055176 seconds 2024-05-29 18:07:35,006 - octoprint.server.util.flask - INFO - Passively logging in user will from 127.0.0.1 2024-05-29 18:07:35,012 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2024-05-29 18:07:35,021 - octoprint.access.users - INFO - Logged in user: will 2024-05-29 18:07:35,039 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://OctoPrint.local:80/', 'accessToken': '59ADA74C5C6D4B569D522D08FD1C4AFF'}, 'printer': {'name': 'Default', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 200, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 0, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 30, 'useM600': False}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': True}, 'spoolManager': {'enabled': False}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'icon': 'home', 'command': 'G28', 'color': '#dcdde1', 'confirm': False, 'exit': True}, {'icon': 'ruler-vertical', 'command': 'G29', 'color': '#4bae50', 'confirm': False, 'exit': True}, {'icon': 'fire-alt', 'command': 'M140 S50; M104 S185', 'color': '#e1b12c', 'confirm': False, 'exit': True}, {'icon': 'snowflake', 'command': 'M140 S0; M104 S0', 'color': '#0097e6', 'confirm': False, 'exit': True}, {'icon': 'redo-alt', 'command': '[!RELOAD]', 'color': '#7f8fa6', 'confirm': True, 'exit': False}, {'icon': 'power-off', 'command': '[!SHUTDOWN]', 'color': '#e84118', 'confirm': True, 'exit': False}], 'fileSorting': {'attribute': 'name', 'order': 'asc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': False, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2024-05-29 18:07:35,313 - octoprint.server.util.sockjs - INFO - User will logged in on the socket from client 127.0.0.1 2024-05-29 18:07:37,858 - octoprint.plugins.octoeverywhere - INFO - Web Stream ws [76] websocket closed after 3.31553316116333 seconds 2024-05-29 18:07:37,863 - octoprint.server.util.sockjs - INFO - Client connection closed: 127.0.0.1 2024-05-29 18:17:35,303 - octoprint.plugins.octoeverywhere - INFO - Starting a secondary connection to wss://nyc.octoeverywhere.com/octoclientws method 2 2024-05-29 18:17:35,307 - octoprint.plugins.octoeverywhere - INFO - Attempting to talk to OctoEverywhere, server con wss://nyc.octoeverywhere.com/octoclientws[1] wsId:2946095784 2024-05-29 18:17:35,466 - octoprint.plugins.octoeverywhere - INFO - Connected To OctoEverywhere, server con wss://nyc.octoeverywhere.com/octoclientws[1]. Starting handshake... 2024-05-29 18:17:35,662 - octoprint.plugins.octoeverywhere - INFO - Handshake complete, server con wss://nyc.octoeverywhere.com/octoclientws[1], successfully connected to OctoEverywhere! 2024-05-29 18:17:35,912 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2024-05-29 18:17:35,943 - octoprint.server.util.sockjs - INFO - New connection from client: 127.0.0.1 2024-05-29 18:17:35,976 - octoprint.server.util.flask - INFO - Passively logging in user will from 127.0.0.1 2024-05-29 18:17:35,977 - octoprint.access.users - INFO - Logged in user: will 2024-05-29 18:17:35,994 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://OctoPrint.local:80/', 'accessToken': '59ADA74C5C6D4B569D522D08FD1C4AFF'}, 'printer': {'name': 'Default', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 200, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 0, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 30, 'useM600': False}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': True}, 'spoolManager': {'enabled': False}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'icon': 'home', 'command': 'G28', 'color': '#dcdde1', 'confirm': False, 'exit': True}, {'icon': 'ruler-vertical', 'command': 'G29', 'color': '#4bae50', 'confirm': False, 'exit': True}, {'icon': 'fire-alt', 'command': 'M140 S50; M104 S185', 'color': '#e1b12c', 'confirm': False, 'exit': True}, {'icon': 'snowflake', 'command': 'M140 S0; M104 S0', 'color': '#0097e6', 'confirm': False, 'exit': True}, {'icon': 'redo-alt', 'command': '[!RELOAD]', 'color': '#7f8fa6', 'confirm': True, 'exit': False}, {'icon': 'power-off', 'command': '[!SHUTDOWN]', 'color': '#e84118', 'confirm': True, 'exit': False}], 'fileSorting': {'attribute': 'name', 'order': 'asc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': False, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2024-05-29 18:17:36,017 - octoprint.plugins.octoeverywhere - INFO - Web Stream ws [8] opened, attempt 1 after 0.36552929878234863 seconds 2024-05-29 18:17:36,018 - octoprint.plugins.octoeverywhere - INFO - Web Stream ws [8] first message sent to local server after 0.3664286136627197 seconds 2024-05-29 18:17:36,143 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2024-05-29 18:17:36,157 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://OctoPrint.local:80/', 'accessToken': '59ADA74C5C6D4B569D522D08FD1C4AFF'}, 'printer': {'name': 'Default', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 200, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 0, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 30, 'useM600': False}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': True}, 'spoolManager': {'enabled': False}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'icon': 'home', 'command': 'G28', 'color': '#dcdde1', 'confirm': False, 'exit': True}, {'icon': 'ruler-vertical', 'command': 'G29', 'color': '#4bae50', 'confirm': False, 'exit': True}, {'icon': 'fire-alt', 'command': 'M140 S50; M104 S185', 'color': '#e1b12c', 'confirm': False, 'exit': True}, {'icon': 'snowflake', 'command': 'M140 S0; M104 S0', 'color': '#0097e6', 'confirm': False, 'exit': True}, {'icon': 'redo-alt', 'command': '[!RELOAD]', 'color': '#7f8fa6', 'confirm': True, 'exit': False}, {'icon': 'power-off', 'command': '[!SHUTDOWN]', 'color': '#e84118', 'confirm': True, 'exit': False}], 'fileSorting': {'attribute': 'name', 'order': 'asc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': False, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2024-05-29 18:17:36,282 - octoprint.server.util.sockjs - INFO - User will logged in on the socket from client 127.0.0.1 2024-05-29 18:18:31,247 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2024-05-29 18:18:31,891 - octoprint.plugins.octoeverywhere - INFO - Web Stream ws [8] websocket closed after 56.23927664756775 seconds 2024-05-29 18:18:31,896 - octoprint.server.util.sockjs - INFO - Client connection closed: 127.0.0.1 2024-05-29 18:18:37,403 - octoprint.plugins.octoeverywhere - INFO - Updating server latencies... 2024-05-29 18:18:39,182 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 908, 'printer_state': 'PRINTING'} 2024-05-29 18:18:44,754 - octoprint.plugins.octoeverywhere - INFO - Ping Pong Stats: Default:[tor,37.384748458862305], Lowest:[nyc,19.840717315673828] Use Low Latency Enabled: True 2024-05-29 18:18:44,755 - octoprint.plugins.octoeverywhere - INFO - First run latency callback fired, disconnecting primary OctoStream to reconnect to most ideal latency server. Current: wss://starport-v1.octoeverywhere.com/octoclientws[1]. 2024-05-29 18:18:44,756 - octoprint.plugins.octoeverywhere - INFO - Closing all open web stream sockets (0) 2024-05-29 18:18:44,756 - octoprint.plugins.octoeverywhere - INFO - OctoServerCon websocket close start. IsPrimary?:True; wsId:2944417976 2024-05-29 18:18:44,789 - octoprint.plugins.octoeverywhere - INFO - OctoServerCon disconnect complete. 2024-05-29 18:18:44,790 - octoprint.plugins.octoeverywhere - INFO - Service websocket closed. 2024-05-29 18:18:44,798 - octoprint.plugins.octoeverywhere - INFO - Disconnected from OctoEverywhere, server con wss://starport-v1.octoeverywhere.com/octoclientws[1] 2024-05-29 18:18:44,800 - octoprint.plugins.octoeverywhere - INFO - Closing all open web stream sockets (0) 2024-05-29 18:18:44,801 - octoprint.plugins.octoeverywhere - INFO - Skipping reconnect delay due to instant reconnect request. 2024-05-29 18:18:44,801 - octoprint.plugins.octoeverywhere - INFO - Attempting to use lowest latency server: wss://nyc.octoeverywhere.com/octoclientws 2024-05-29 18:18:44,802 - octoprint.plugins.octoeverywhere - INFO - Attempting to talk to OctoEverywhere, server con wss://nyc.octoeverywhere.com/octoclientws[2] wsId:2946703568 2024-05-29 18:18:44,949 - octoprint.plugins.octoeverywhere - INFO - Connected To OctoEverywhere, server con wss://nyc.octoeverywhere.com/octoclientws[2]. Starting handshake... 2024-05-29 18:18:45,176 - octoprint.plugins.octoeverywhere - ERROR - OctoEverywhere Ws error: [Errno 104] Connection reset by peer 2024-05-29 18:18:45,177 - websocket - ERROR - [Errno 104] Connection reset by peer - goodbye 2024-05-29 18:18:45,178 - octoprint.plugins.octoeverywhere - INFO - Service websocket closed. 2024-05-29 18:18:45,178 - octoprint.plugins.octoeverywhere - INFO - Disconnected from OctoEverywhere, server con wss://nyc.octoeverywhere.com/octoclientws[1] 2024-05-29 18:18:45,178 - octoprint.plugins.octoeverywhere - INFO - Closing all open web stream sockets (0) 2024-05-29 18:18:45,179 - octoprint.plugins.octoeverywhere - INFO - Sleeping for 3 seconds before trying again. 2024-05-29 18:18:45,185 - octoprint.plugins.octoeverywhere - INFO - Handshake complete, server con wss://nyc.octoeverywhere.com/octoclientws[2], successfully connected to OctoEverywhere! 2024-05-29 18:18:48,182 - octoprint.plugins.octoeverywhere - INFO - Attempting to talk to OctoEverywhere, server con wss://nyc.octoeverywhere.com/octoclientws[2] wsId:2946707336 2024-05-29 18:18:48,340 - octoprint.plugins.octoeverywhere - INFO - Connected To OctoEverywhere, server con wss://nyc.octoeverywhere.com/octoclientws[2]. Starting handshake... 2024-05-29 18:18:48,403 - octoprint.plugins.octoeverywhere - ERROR - Handshake failed, reason 'PrimayConnectionExists' 2024-05-29 18:18:48,404 - octoprint.plugins.octoeverywhere - ERROR - Session reported an error [wss://nyc.octoeverywhere.com/octoclientws[2]], closing the websocket. Backoff time sec: 206 2024-05-29 18:18:48,404 - octoprint.plugins.octoeverywhere - INFO - Closing all open web stream sockets (0) 2024-05-29 18:18:48,404 - octoprint.plugins.octoeverywhere - INFO - OctoServerCon websocket close start. IsPrimary?:False; wsId:2946707336 2024-05-29 18:18:48,407 - octoprint.plugins.octoeverywhere - INFO - OctoServerCon disconnect complete. 2024-05-29 18:18:48,411 - octoprint.plugins.octoeverywhere - INFO - Service websocket closed. 2024-05-29 18:18:48,412 - octoprint.plugins.octoeverywhere - INFO - Disconnected from OctoEverywhere, server con wss://nyc.octoeverywhere.com/octoclientws[2] 2024-05-29 18:18:48,412 - octoprint.plugins.octoeverywhere - INFO - Closing all open web stream sockets (0) 2024-05-29 18:18:48,412 - octoprint.plugins.octoeverywhere - INFO - Sleeping for 216 seconds before trying again. 2024-05-29 18:19:11,729 - octoprint.plugins.octoeverywhere - INFO - NotificationsHandler successfully sent 'progress' 2024-05-29 18:20:48,122 - octoprint.plugins.octoeverywhere - INFO - NotificationsHandler successfully sent 'firstlayerdone' 2024-05-29 18:22:24,511 - octoprint.plugins.octoeverywhere - INFO - Secondary connection to wss://nyc.octoeverywhere.com/octoclientws has ended 2024-05-29 18:22:24,513 - octoprint.plugins.octoeverywhere - INFO - RepeatTimer thread exit 2024-05-29 18:31:15,632 - octoprint.plugins.octoeverywhere - INFO - NotificationsHandler successfully sent 'progress' 2024-05-29 18:33:31,248 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2024-05-29 18:33:39,203 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 1808, 'printer_state': 'PRINTING'} 2024-05-29 18:38:46,585 - octoprint.plugins.octoeverywhere - INFO - First layer timer is done. Stopping. 2024-05-29 18:38:46,587 - octoprint.plugins.octoeverywhere - INFO - RepeatTimer thread exit 2024-05-29 18:38:47,160 - octoprint.plugins.octoeverywhere - INFO - NotificationsHandler successfully sent 'thirdlayerdone' 2024-05-29 18:43:47,595 - octoprint.plugins.octoeverywhere - INFO - NotificationsHandler successfully sent 'progress' 2024-05-29 18:48:31,249 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2024-05-29 18:48:39,190 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 2708, 'printer_state': 'PRINTING'} 2024-05-29 18:55:48,740 - octoprint.plugins.octoeverywhere - INFO - NotificationsHandler successfully sent 'progress' 2024-05-29 19:03:31,251 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2024-05-29 19:03:39,216 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 3608, 'printer_state': 'PRINTING'} 2024-05-29 19:06:35,789 - octoprint.plugins.octoeverywhere - INFO - NotificationsHandler successfully sent 'timerprogress' 2024-05-29 19:08:21,838 - octoprint.plugins.octoeverywhere - INFO - NotificationsHandler successfully sent 'progress' 2024-05-29 19:18:31,252 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2024-05-29 19:18:39,208 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 4508, 'printer_state': 'PRINTING'} 2024-05-29 19:20:47,818 - octoprint.plugins.octoeverywhere - INFO - NotificationsHandler successfully sent 'progress' 2024-05-29 19:32:51,198 - octoprint.plugins.octoeverywhere - INFO - NotificationsHandler successfully sent 'progress' 2024-05-29 19:33:31,254 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2024-05-29 19:33:39,228 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 5408, 'printer_state': 'PRINTING'} 2024-05-29 19:42:06,906 - octoprint.plugins.octoeverywhere - ERROR - OctoEverywhere Ws error: Connection to remote host was lost. 2024-05-29 19:42:06,907 - websocket - ERROR - Connection to remote host was lost. - goodbye 2024-05-29 19:42:06,908 - octoprint.plugins.octoeverywhere - INFO - Service websocket closed. 2024-05-29 19:42:06,914 - octoprint.plugins.octoeverywhere - INFO - Disconnected from OctoEverywhere, server con wss://nyc.octoeverywhere.com/octoclientws[2] 2024-05-29 19:42:06,916 - octoprint.plugins.octoeverywhere - INFO - Closing all open web stream sockets (0) 2024-05-29 19:42:06,916 - octoprint.plugins.octoeverywhere - INFO - Sleeping for 6 seconds before trying again. 2024-05-29 19:42:12,925 - octoprint.plugins.octoeverywhere - INFO - Attempting to use lowest latency server: wss://nyc.octoeverywhere.com/octoclientws 2024-05-29 19:42:12,926 - octoprint.plugins.octoeverywhere - INFO - Attempting to talk to OctoEverywhere, server con wss://nyc.octoeverywhere.com/octoclientws[3] wsId:2683043048 2024-05-29 19:42:13,479 - octoprint.plugins.octoeverywhere - INFO - Connected To OctoEverywhere, server con wss://nyc.octoeverywhere.com/octoclientws[3]. Starting handshake... 2024-05-29 19:42:27,180 - octoprint.plugins.octoeverywhere - INFO - Handshake complete, server con wss://nyc.octoeverywhere.com/octoclientws[3], successfully connected to OctoEverywhere! 2024-05-29 19:45:46,153 - octoprint.plugins.octoeverywhere - INFO - NotificationsHandler successfully sent 'progress' 2024-05-29 19:48:31,255 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2024-05-29 19:48:39,229 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 6308, 'printer_state': 'PRINTING'} 2024-05-29 19:57:55,974 - octoprint.plugins.octoeverywhere - INFO - NotificationsHandler successfully sent 'progress' 2024-05-29 20:03:31,256 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2024-05-29 20:03:39,230 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 7208, 'printer_state': 'PRINTING'} 2024-05-29 20:06:35,418 - octoprint.plugins.octoeverywhere - INFO - NotificationsHandler successfully sent 'timerprogress' 2024-05-29 20:09:35,986 - octoprint.plugins.octoeverywhere - INFO - Starting FinalSnap 2024-05-29 20:10:22,818 - octoprint.util.comm - INFO - Finished in 7429.175 s. 2024-05-29 20:10:22,819 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Finishing" 2024-05-29 20:10:22,847 - octoprint.printer.standard.job - INFO - Print job done - origin: local, path: Califlower v29_PLA_2h5m.gcode, owner: will 2024-05-29 20:10:22,891 - octoprint.util.comm - INFO - Changing monitoring state from "Finishing" to "Operational" 2024-05-29 20:10:22,905 - octoprint.plugins.achievements - INFO - New achievement unlocked: That's One Small Step For (A) Man! 2024-05-29 20:10:22,983 - octoprint.plugins.DisplayLayerProgress - INFO - Printing stopped. Detailed progress stopped. 2024-05-29 20:10:23,054 - octoprint.plugins.octoeverywhere - INFO - Gadget has stopped watching! 2024-05-29 20:10:23,056 - octoprint.plugins.octoeverywhere - INFO - Stopping final snap and using snapshot from ~16.655004262924194 sec ago, index slot 17 / 36 2024-05-29 20:10:23,064 - octoprint.plugins.octoeverywhere - INFO - RepeatTimer thread exit 2024-05-29 20:10:23,065 - octoprint.plugins.octoeverywhere - INFO - RepeatTimer thread exit 2024-05-29 20:10:23,065 - octoprint.plugins.octoeverywhere - INFO - RepeatTimer thread exit 2024-05-29 20:10:23,375 - octoprint.access.users - INFO - Cleaning up user session 37E1E1D090164FAEA3373E48E13C0F5F for user will 2024-05-29 20:10:23,376 - octoprint.access.users - INFO - Logged out user: will 2024-05-29 20:10:23,376 - octoprint.access.users - INFO - Cleaning up user session 60DDC39E17B547FD91E8FE33FD364E38 for user will 2024-05-29 20:10:23,377 - octoprint.access.users - INFO - Logged out user: will 2024-05-29 20:10:23,377 - octoprint.access.users - INFO - Cleaning up user session 879944913B87491EB72501CAA7CD2A0C for user will 2024-05-29 20:10:23,378 - octoprint.access.users - INFO - Logged out user: will 2024-05-29 20:10:23,378 - octoprint.access.users - INFO - Cleaning up user session BC14E109D6CC4A88BBE05B7D48049D85 for user will 2024-05-29 20:10:23,378 - octoprint.access.users - INFO - Logged out user: will 2024-05-29 20:10:23,424 - octoprint.plugins.tracking - INFO - Sent tracking event print_done, payload: {'origin': 'local', 'file': 'bb0b001417cf5fbd3a01e06a12947778c325501c', 'elapsed': 7429} 2024-05-29 20:10:23,755 - octoprint.plugins.octoeverywhere - INFO - NotificationsHandler successfully sent 'done' 2024-05-29 20:10:23,824 - octoprint.plugins.tracking - INFO - Sent tracking event achievement_unlocked, payload: {'achievement': 'one_small_step_for_man'} 2024-05-29 20:18:31,258 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2024-05-29 20:18:39,234 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 8108, 'printer_state': 'OPERATIONAL'} 2024-05-29 20:33:31,259 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2024-05-29 20:33:39,246 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 9008, 'printer_state': 'OPERATIONAL'} 2024-05-29 20:48:31,261 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2024-05-29 20:48:39,217 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 9908, 'printer_state': 'OPERATIONAL'} 2024-05-29 21:03:31,263 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2024-05-29 21:03:39,413 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 10808, 'printer_state': 'OPERATIONAL'} 2024-05-29 21:18:31,264 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2024-05-29 21:18:39,294 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 11708, 'printer_state': 'OPERATIONAL'} 2024-05-29 21:33:31,266 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2024-05-29 21:33:39,457 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 12608, 'printer_state': 'OPERATIONAL'} 2024-05-29 21:48:31,268 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2024-05-29 21:48:39,260 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 13508, 'printer_state': 'OPERATIONAL'} 2024-05-29 22:03:31,270 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2024-05-29 22:03:39,266 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 14408, 'printer_state': 'OPERATIONAL'} 2024-05-29 22:05:05,474 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2024-05-29 22:05:05,476 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://OctoPrint.local:80/', 'accessToken': '59ADA74C5C6D4B569D522D08FD1C4AFF'}, 'printer': {'name': 'Default', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 200, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 0, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 30, 'useM600': False}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': True}, 'spoolManager': {'enabled': False}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'icon': 'home', 'command': 'G28', 'color': '#dcdde1', 'confirm': False, 'exit': True}, {'icon': 'ruler-vertical', 'command': 'G29', 'color': '#4bae50', 'confirm': False, 'exit': True}, {'icon': 'fire-alt', 'command': 'M140 S50; M104 S185', 'color': '#e1b12c', 'confirm': False, 'exit': True}, {'icon': 'snowflake', 'command': 'M140 S0; M104 S0', 'color': '#0097e6', 'confirm': False, 'exit': True}, {'icon': 'redo-alt', 'command': '[!RELOAD]', 'color': '#7f8fa6', 'confirm': True, 'exit': False}, {'icon': 'power-off', 'command': '[!SHUTDOWN]', 'color': '#e84118', 'confirm': True, 'exit': False}], 'fileSorting': {'attribute': 'name', 'order': 'asc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': False, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2024-05-29 22:05:05,691 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2024-05-29 22:05:05,694 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://OctoPrint.local:80/', 'accessToken': '59ADA74C5C6D4B569D522D08FD1C4AFF'}, 'printer': {'name': 'Default', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 200, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 0, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 30, 'useM600': False}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': True}, 'spoolManager': {'enabled': False}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'icon': 'home', 'command': 'G28', 'color': '#dcdde1', 'confirm': False, 'exit': True}, {'icon': 'ruler-vertical', 'command': 'G29', 'color': '#4bae50', 'confirm': False, 'exit': True}, {'icon': 'fire-alt', 'command': 'M140 S50; M104 S185', 'color': '#e1b12c', 'confirm': False, 'exit': True}, {'icon': 'snowflake', 'command': 'M140 S0; M104 S0', 'color': '#0097e6', 'confirm': False, 'exit': True}, {'icon': 'redo-alt', 'command': '[!RELOAD]', 'color': '#7f8fa6', 'confirm': True, 'exit': False}, {'icon': 'power-off', 'command': '[!SHUTDOWN]', 'color': '#e84118', 'confirm': True, 'exit': False}], 'fileSorting': {'attribute': 'name', 'order': 'asc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': False, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2024-05-29 22:05:06,354 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk 2024-05-29 22:05:07,648 - octoprint.server.util.flask - INFO - Passively logging in user will from 192.168.86.47 2024-05-29 22:05:07,648 - octoprint.access.users - INFO - Logged in user: will 2024-05-29 22:05:08,478 - octoprint.server.util.sockjs - INFO - Client connection closed: 192.168.86.47 2024-05-29 22:05:09,667 - octoprint.server.util.sockjs - INFO - New connection from client: 192.168.86.47 2024-05-29 22:05:09,751 - octoprint.server.util.flask - INFO - Passively logging in user will from 192.168.86.47 2024-05-29 22:05:09,751 - octoprint.access.users - INFO - Logged in user: will 2024-05-29 22:05:09,855 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2024-05-29 22:05:09,857 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://OctoPrint.local:80/', 'accessToken': '59ADA74C5C6D4B569D522D08FD1C4AFF'}, 'printer': {'name': 'Default', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 200, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 0, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 30, 'useM600': False}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': True}, 'spoolManager': {'enabled': False}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'icon': 'home', 'command': 'G28', 'color': '#dcdde1', 'confirm': False, 'exit': True}, {'icon': 'ruler-vertical', 'command': 'G29', 'color': '#4bae50', 'confirm': False, 'exit': True}, {'icon': 'fire-alt', 'command': 'M140 S50; M104 S185', 'color': '#e1b12c', 'confirm': False, 'exit': True}, {'icon': 'snowflake', 'command': 'M140 S0; M104 S0', 'color': '#0097e6', 'confirm': False, 'exit': True}, {'icon': 'redo-alt', 'command': '[!RELOAD]', 'color': '#7f8fa6', 'confirm': True, 'exit': False}, {'icon': 'power-off', 'command': '[!SHUTDOWN]', 'color': '#e84118', 'confirm': True, 'exit': False}], 'fileSorting': {'attribute': 'name', 'order': 'asc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': False, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2024-05-29 22:05:09,974 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2024-05-29 22:05:09,976 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://OctoPrint.local:80/', 'accessToken': '59ADA74C5C6D4B569D522D08FD1C4AFF'}, 'printer': {'name': 'Default', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 200, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 0, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 30, 'useM600': False}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': True}, 'spoolManager': {'enabled': False}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'icon': 'home', 'command': 'G28', 'color': '#dcdde1', 'confirm': False, 'exit': True}, {'icon': 'ruler-vertical', 'command': 'G29', 'color': '#4bae50', 'confirm': False, 'exit': True}, {'icon': 'fire-alt', 'command': 'M140 S50; M104 S185', 'color': '#e1b12c', 'confirm': False, 'exit': True}, {'icon': 'snowflake', 'command': 'M140 S0; M104 S0', 'color': '#0097e6', 'confirm': False, 'exit': True}, {'icon': 'redo-alt', 'command': '[!RELOAD]', 'color': '#7f8fa6', 'confirm': True, 'exit': False}, {'icon': 'power-off', 'command': '[!SHUTDOWN]', 'color': '#e84118', 'confirm': True, 'exit': False}], 'fileSorting': {'attribute': 'name', 'order': 'asc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': False, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2024-05-29 22:05:10,606 - octoprint.server.util.sockjs - INFO - User will logged in on the socket from client 192.168.86.47 2024-05-29 22:05:11,643 - octoprint.plugins.tracking - INFO - Sent tracking event webui_load, payload: {'browser_name': 'Chrome', 'browser_version': '124.0.0.0', 'os_name': 'Windows', 'os_version': '10'} 2024-05-29 22:06:26,131 - octoprint.plugins.action_command_notification - INFO - Got a notification: Settings Stored 2024-05-29 22:07:06,609 - octoprint.server.util.sockjs - INFO - User will logged out, logging out on socket 2024-05-29 22:07:06,612 - octoprint.access.users - INFO - Logged out user: will 2024-05-29 22:07:06,817 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2024-05-29 22:07:06,820 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://OctoPrint.local:80/', 'accessToken': '59ADA74C5C6D4B569D522D08FD1C4AFF'}, 'printer': {'name': 'Default', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 200, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 0, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 30, 'useM600': False}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': True}, 'spoolManager': {'enabled': False}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'icon': 'home', 'command': 'G28', 'color': '#dcdde1', 'confirm': False, 'exit': True}, {'icon': 'ruler-vertical', 'command': 'G29', 'color': '#4bae50', 'confirm': False, 'exit': True}, {'icon': 'fire-alt', 'command': 'M140 S50; M104 S185', 'color': '#e1b12c', 'confirm': False, 'exit': True}, {'icon': 'snowflake', 'command': 'M140 S0; M104 S0', 'color': '#0097e6', 'confirm': False, 'exit': True}, {'icon': 'redo-alt', 'command': '[!RELOAD]', 'color': '#7f8fa6', 'confirm': True, 'exit': False}, {'icon': 'power-off', 'command': '[!SHUTDOWN]', 'color': '#e84118', 'confirm': True, 'exit': False}], 'fileSorting': {'attribute': 'name', 'order': 'asc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': False, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2024-05-29 22:07:06,944 - octoprint.server.util.sockjs - INFO - Client connection closed: 192.168.86.47 2024-05-29 22:07:07,333 - octoprint.server.util.sockjs - INFO - New connection from client: 192.168.86.47 2024-05-29 22:07:14,820 - octoprint.access.users - INFO - Logged in user: will 2024-05-29 22:07:14,822 - octoprint.server.api - INFO - Actively logging in user will from 192.168.86.47 2024-05-29 22:07:14,873 - octoprint.server.util.flask - INFO - Passively logging in user will from 192.168.86.47 2024-05-29 22:07:14,874 - octoprint.access.users - INFO - Logged in user: will 2024-05-29 22:07:15,064 - octoprint.server.util.sockjs - INFO - Client connection closed: 192.168.86.47 2024-05-29 22:07:15,505 - octoprint.server.util.sockjs - INFO - New connection from client: 192.168.86.47 2024-05-29 22:07:15,559 - octoprint.server.util.flask - INFO - Passively logging in user will from 192.168.86.47 2024-05-29 22:07:15,560 - octoprint.access.users - INFO - Logged in user: will 2024-05-29 22:07:15,662 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2024-05-29 22:07:15,664 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://OctoPrint.local:80/', 'accessToken': '59ADA74C5C6D4B569D522D08FD1C4AFF'}, 'printer': {'name': 'Default', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 200, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 0, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 30, 'useM600': False}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': True}, 'spoolManager': {'enabled': False}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'icon': 'home', 'command': 'G28', 'color': '#dcdde1', 'confirm': False, 'exit': True}, {'icon': 'ruler-vertical', 'command': 'G29', 'color': '#4bae50', 'confirm': False, 'exit': True}, {'icon': 'fire-alt', 'command': 'M140 S50; M104 S185', 'color': '#e1b12c', 'confirm': False, 'exit': True}, {'icon': 'snowflake', 'command': 'M140 S0; M104 S0', 'color': '#0097e6', 'confirm': False, 'exit': True}, {'icon': 'redo-alt', 'command': '[!RELOAD]', 'color': '#7f8fa6', 'confirm': True, 'exit': False}, {'icon': 'power-off', 'command': '[!SHUTDOWN]', 'color': '#e84118', 'confirm': True, 'exit': False}], 'fileSorting': {'attribute': 'name', 'order': 'asc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': False, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2024-05-29 22:07:15,778 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2024-05-29 22:07:15,780 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://OctoPrint.local:80/', 'accessToken': '59ADA74C5C6D4B569D522D08FD1C4AFF'}, 'printer': {'name': 'Default', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 200, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 0, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 30, 'useM600': False}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': True}, 'spoolManager': {'enabled': False}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'icon': 'home', 'command': 'G28', 'color': '#dcdde1', 'confirm': False, 'exit': True}, {'icon': 'ruler-vertical', 'command': 'G29', 'color': '#4bae50', 'confirm': False, 'exit': True}, {'icon': 'fire-alt', 'command': 'M140 S50; M104 S185', 'color': '#e1b12c', 'confirm': False, 'exit': True}, {'icon': 'snowflake', 'command': 'M140 S0; M104 S0', 'color': '#0097e6', 'confirm': False, 'exit': True}, {'icon': 'redo-alt', 'command': '[!RELOAD]', 'color': '#7f8fa6', 'confirm': True, 'exit': False}, {'icon': 'power-off', 'command': '[!SHUTDOWN]', 'color': '#e84118', 'confirm': True, 'exit': False}], 'fileSorting': {'attribute': 'name', 'order': 'asc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': False, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2024-05-29 22:07:16,127 - octoprint.server.util.sockjs - INFO - User will logged in on the socket from client 192.168.86.47 2024-05-29 22:07:17,348 - octoprint.plugins.tracking - INFO - Sent tracking event webui_load, payload: {'browser_name': 'Chrome', 'browser_version': '124.0.0.0', 'os_name': 'Windows', 'os_version': '10'} 2024-05-29 22:07:18,421 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from https://plugins.octoprint.org/plugins.json 2024-05-29 22:07:30,337 - octoprint.plugins.pluginmanager - INFO - Installing plugin from https://github.com/gdombiak/OctoPrint-OctoPod/archive/master.zip 2024-05-29 22:07:37,197 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2024-05-29 22:07:37,255 - octoprint.plugin.core - INFO - Found 26 plugin(s) providing 25 mixin implementations, 67 hook handlers 2024-05-29 22:07:37,258 - octoprint.plugin.core - INFO - 26 plugin(s) registered with the system: | Achievements Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/achievements | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/appkeys | Backup & Restore (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/backup | Classic Webcam (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/classicwebcam | Core Wizard (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/corewizard | Cura Thumbnails (1.0.2) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_ultimakerformatpackage | Discovery (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/discovery | DisplayLayerProgress Plugin (1.28.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_DisplayLayerProgress | Error Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/errortracking | Event Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/eventmanager | File Check (2024.3.27) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_file_check | Firmware Check (2021.10.11) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmware_check | GCode Viewer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/gcodeviewer | Logging (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/logging | OctoDash Companion (0.0.7) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_octodashcompanion | OctoEverywhere! (3.3.5) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_octoeverywhere | !OctoPod Plugin (0.3.16) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_octopod | Pi Support Plugin (2023.10.10) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/pluginmanager | PrintTimeGenius Plugin (2.3.3) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_PrintTimeGenius | Software Update (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/softwareupdate | Virtual Printer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2024-05-29 22:07:37,258 - octoprint.plugins.pluginmanager - INFO - The plugin was installed successfully: OctoPod Plugin, version 0.3.16 2024-05-29 22:07:37,663 - octoprint.plugins.tracking - INFO - Sent tracking event install_plugin, payload: {'plugin': 'octopod', 'plugin_version': '0.3.16'} 2024-05-29 22:07:42,723 - octoprint.server.api.system - INFO - Performing command for core:restart: sudo service octoprint restart 2024-05-29 22:07:44,870 - octoprint.startup - INFO - ****************************************************************************** 2024-05-29 22:07:44,873 - octoprint.startup - INFO - Starting OctoPrint 1.10.1 2024-05-29 22:07:44,874 - octoprint.startup - INFO - ****************************************************************************** 2024-05-29 22:07:45,112 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity changed from offline to online 2024-05-29 22:07:45,177 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: online 2024-05-29 22:07:45,177 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 8.8.8.8:53 is working 2024-05-29 22:07:45,177 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is working 2024-05-29 22:07:45,655 - octoprint.startup - INFO - Blacklist processing done, adding 3 blacklisted plugin versions: roomtemp (any), GcodeEditor (>=0.1.1,<=0.2.8), gcodeleveling (>=0.1.0,<=0.1.1) 2024-05-29 22:07:45,663 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2024-05-29 22:07:47,976 - octoprint.startup - INFO - Added settings overlay from plugin octodashcompanion 2024-05-29 22:07:47,981 - octoprint.plugin.core - INFO - Found 26 plugin(s) providing 26 mixin implementations, 70 hook handlers 2024-05-29 22:07:47,985 - octoprint.server.heartbeat - INFO - Starting server heartbeat, 900.0s interval 2024-05-29 22:07:48,066 - octoprint.server - INFO - Intermediary server started 2024-05-29 22:07:48,083 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/pi/.octoprint/uploads... 2024-05-29 22:07:48,102 - octoprint.filemanager.storage - INFO - ... file metadata for /home/pi/.octoprint/uploads initialized successfully. 2024-05-29 22:07:48,106 - octoprint.server - INFO - Added new permission from plugin achievements: PLUGIN_ACHIEVEMENTS_VIEW (needs: "Need(method='role', value='plugin_achievements_view')") 2024-05-29 22:07:48,106 - octoprint.server - INFO - Added new permission from plugin achievements: PLUGIN_ACHIEVEMENTS_RESET (needs: "Need(method='role', value='plugin_achievements_reset')") 2024-05-29 22:07:48,106 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_SHOW (needs: "Need(method='role', value='plugin_action_command_notification_show')") 2024-05-29 22:07:48,107 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_CLEAR (needs: "Need(method='role', value='plugin_action_command_notification_clear')") 2024-05-29 22:07:48,107 - octoprint.server - INFO - Added new permission from plugin action_command_prompt: PLUGIN_ACTION_COMMAND_PROMPT_INTERACT (needs: "Need(method='role', value='plugin_action_command_prompt_interact')") 2024-05-29 22:07:48,107 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_READ (needs: "Need(method='role', value='plugin_announcements_read')") 2024-05-29 22:07:48,107 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_MANAGE (needs: "Need(method='role', value='plugin_announcements_read'), Need(method='role', value='plugin_announcements_manage')") 2024-05-29 22:07:48,108 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_ADMIN (needs: "Need(method='role', value='plugin_appkeys_admin')") 2024-05-29 22:07:48,108 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_GRANT (needs: "Need(method='role', value='plugin_appkeys_user')") 2024-05-29 22:07:48,108 - octoprint.server - INFO - Added new permission from plugin backup: PLUGIN_BACKUP_CREATE (needs: "Need(method='role', value='plugin_backup_create')") 2024-05-29 22:07:48,108 - octoprint.server - INFO - Added new permission from plugin file_check: PLUGIN_FILE_CHECK_RUN (needs: "Need(method='role', value='plugin_file_check_run')") 2024-05-29 22:07:48,109 - octoprint.server - INFO - Added new permission from plugin firmware_check: PLUGIN_FIRMWARE_CHECK_DISPLAY (needs: "Need(method='role', value='plugin_firmware_check_display')") 2024-05-29 22:07:48,109 - octoprint.server - INFO - Added new permission from plugin logging: PLUGIN_LOGGING_MANAGE (needs: "Need(method='role', value='plugin_logging_manage')") 2024-05-29 22:07:48,109 - octoprint.server - INFO - Added new permission from plugin octodashcompanion: PLUGIN_OCTODASHCOMPANION_MANAGEBACKUPS (needs: "Need(method='role', value='plugin_octodashcompanion_admin')") 2024-05-29 22:07:48,109 - octoprint.server - INFO - Added new permission from plugin pi_support: PLUGIN_PI_SUPPORT_STATUS (needs: "Need(method='role', value='plugin_pi_support_check')") 2024-05-29 22:07:48,110 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_LIST (needs: "Need(method='role', value='plugin_pluginmanager_list')") 2024-05-29 22:07:48,110 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_MANAGE (needs: "Need(method='role', value='plugin_pluginmanager_manage')") 2024-05-29 22:07:48,110 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_INSTALL (needs: "Need(method='role', value='plugin_pluginmanager_install'), Need(method='role', value='plugin_pluginmanager_manage')") 2024-05-29 22:07:48,111 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CHECK (needs: "Need(method='role', value='plugin_softwareupdate_check')") 2024-05-29 22:07:48,119 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_UPDATE (needs: "Need(method='role', value='plugin_softwareupdate_update')") 2024-05-29 22:07:48,120 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CONFIGURE (needs: "Need(method='role', value='plugin_softwareupdate_configure')") 2024-05-29 22:07:48,132 - octoprint.printer.standard - INFO - Using print time estimator provided by PrintTimeGenius 2024-05-29 22:07:49,013 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2024-05-29 22:07:49,879 - octoprint.util.pip - INFO - Version of pip is 22.3 2024-05-29 22:07:49,886 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2024-05-29 22:07:49,886 - octoprint.util.pip - INFO - ==> pip ok -> yes 2024-05-29 22:07:49,912 - octoprint.plugins.achievements - INFO - Loading data from /home/pi/.octoprint/data/achievements/data.json 2024-05-29 22:07:49,915 - octoprint.plugins.achievements - INFO - Loading data for None from /home/pi/.octoprint/data/achievements/2024.json 2024-05-29 22:07:49,984 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk 2024-05-29 22:07:50,063 - octoprint.plugins.file_check - INFO - Native grep available: True 2024-05-29 22:07:50,094 - octoprint.plugin.core - INFO - Initialized 26 plugin implementation(s) 2024-05-29 22:07:50,272 - octoprint - INFO - Installing webcam compat overlay for configured default webcam 2024-05-29 22:07:50,273 - octoprint.plugin.core - INFO - 26 plugin(s) registered with the system: | Achievements Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/achievements | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/appkeys | Backup & Restore (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/backup | Classic Webcam (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/classicwebcam | Core Wizard (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/corewizard | Cura Thumbnails (1.0.2) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_ultimakerformatpackage | Discovery (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/discovery | DisplayLayerProgress Plugin (1.28.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_DisplayLayerProgress | Error Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/errortracking | Event Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/eventmanager | File Check (2024.3.27) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_file_check | Firmware Check (2021.10.11) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmware_check | GCode Viewer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/gcodeviewer | Logging (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/logging | OctoDash Companion (0.0.7) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_octodashcompanion | OctoEverywhere! (3.3.5) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_octoeverywhere | OctoPod Plugin (0.3.16) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_octopod | Pi Support Plugin (2023.10.10) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/pluginmanager | PrintTimeGenius Plugin (2.3.3) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_PrintTimeGenius | Software Update (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/softwareupdate | Virtual Printer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2024-05-29 22:07:50,300 - octoprint.environment - INFO - Detected environment is Python 3.9.2 under Linux (linux). Details: | hardware: | cores: 4 | freq: 1800.0 | ram: 1909604352 | os: | bits: 32 | id: linux | platform: linux | plugins: | pi_support: | model: Raspberry Pi 4 Model B Rev 1.5 | octopi_camera_stack: camera-streamer | octopi_version: 1.0.0 | octopiuptodate_build: 1.0.0-1.10.1-20240514102430 | octopiuptodate_build_short: 2024.05.14.102430 | throttle_check_enabled: true | throttle_check_functional: true | throttle_state: '0x0' | python: | pip: '22.3' | version: 3.9.2 | virtualenv: /home/pi/oprint 2024-05-29 22:07:50,316 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/webassets... 2024-05-29 22:07:50,317 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-cache... 2024-05-29 22:07:50,318 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-manifest.json... 2024-05-29 22:07:50,385 - octoprint.plugins.DisplayLayerProgress - WARNING - The Blueprint of this plugin is relying on the default implementation of is_blueprint_csrf_protected (newly added in OctoPrint 1.8.3), which in a future version will be switched from False to True for security reasons. Plugin authors should ensure they explicitly declare the CSRF protection status in their BlueprintPlugin mixin implementation. Recommendation is to enable CSRF protection and exempt views that must not use it with the octoprint.plugin.BlueprintPlugin.csrf_exempt decorator. 2024-05-29 22:07:50,385 - octoprint.server - WARNING - CSRF Protection for Blueprint of plugin DisplayLayerProgress is DISABLED 2024-05-29 22:07:50,389 - octoprint.plugins.octodashcompanion - WARNING - The Blueprint of this plugin is relying on the default implementation of is_blueprint_csrf_protected (newly added in OctoPrint 1.8.3), which in a future version will be switched from False to True for security reasons. Plugin authors should ensure they explicitly declare the CSRF protection status in their BlueprintPlugin mixin implementation. Recommendation is to enable CSRF protection and exempt views that must not use it with the octoprint.plugin.BlueprintPlugin.csrf_exempt decorator. 2024-05-29 22:07:50,389 - octoprint.server - WARNING - CSRF Protection for Blueprint of plugin octodashcompanion is DISABLED 2024-05-29 22:07:50,750 - octoprint.server - INFO - Shutting down intermediary server... 2024-05-29 22:07:51,239 - octoprint.server - INFO - Intermediary server shut down 2024-05-29 22:07:51,243 - octoprint.events - INFO - Processing startup event, this is our first event 2024-05-29 22:07:51,243 - octoprint.events - INFO - Adding 2 events to queue that were held back before startup event 2024-05-29 22:07:51,243 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue... 2024-05-29 22:07:51,249 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue 2024-05-29 22:07:51,250 - octoprint.server - INFO - Autoconnect on startup is configured, trying to connect to the printer... 2024-05-29 22:07:51,280 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json 2024-05-29 22:07:51,305 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2024-05-29 22:07:51,377 - octoprint.server - INFO - Trying to connect to configured serial port None 2024-05-29 22:07:51,561 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2024-05-29 22:07:51,589 - octoprint.server - INFO - Starting autorefresh of serial port list 2024-05-29 22:07:51,639 - octoprint.server - INFO - Autorefresh of serial port list stopped 2024-05-29 22:07:51,665 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder... 2024-05-29 22:07:51,683 - octoprint.server.util.watchdog - INFO - ... initial scan done. 2024-05-29 22:07:51,689 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 7 port/baudrate candidates: /dev/ttyUSB0@115200, /dev/ttyUSB0@250000, /dev/ttyUSB0@230400, /dev/ttyUSB0@57600, /dev/ttyUSB0@38400, /dev/ttyUSB0@19200, /dev/ttyUSB0@9600 2024-05-29 22:07:51,689 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200 2024-05-29 22:07:51,692 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200 2024-05-29 22:07:51,754 - octoprint.plugins.tracking - INFO - Sent tracking event system_unthrottled, payload: {'throttled_now': False, 'throttled_past': False, 'throttled_mask': 0, 'throttled_voltage_now': False, 'throttled_voltage_past': False, 'throttled_overheat_now': False, 'throttled_overheat_past': False} 2024-05-29 22:07:51,774 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2024-05-29 22:07:51,814 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2024-05-29 22:07:52,434 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2024-05-29 22:07:52,653 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on OctoPrint._http._tcp.local.' for _http._tcp.local. 2024-05-29 22:07:53,288 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2024-05-29 22:07:53,290 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2024-05-29 22:07:53,291 - octoprint.util.pip - INFO - ==> pip ok -> yes 2024-05-29 22:07:53,330 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk 2024-05-29 22:07:53,470 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on OctoPrint._octoprint._tcp.local.' for _octoprint._tcp.local. 2024-05-29 22:07:53,490 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance on OctoPrint for SSDP 2024-05-29 22:07:53,507 - octoprint.plugins.octoeverywhere - INFO - OctoPrint host:127.0.0.1 port:5000 2024-05-29 22:07:54,097 - octoprint.plugins.octoeverywhere - INFO - OctoPingPong stats loaded from file. 2024-05-29 22:07:54,100 - octoprint.plugins.octoeverywhere - INFO - mDns Cache file loaded. Cached Entries Found: 0 2024-05-29 22:07:54,104 - octoprint.server - INFO - Listening on http://127.0.0.1:5000 2024-05-29 22:07:54,158 - octoprint.plugins.octoeverywhere - INFO - IPV4 - starport:142.93.152.110 main:172.67.73.161 2024-05-29 22:07:54,161 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2024-05-29 22:07:54,192 - octoprint.plugins.octoeverywhere - INFO - Failed to resolve host ipv6 name [Errno -2] Name or service not known 2024-05-29 22:07:54,321 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2024-05-29 22:07:54,474 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2024-05-29 22:07:54,515 - octoprint.server.util.sockjs - INFO - New connection from client: 192.168.86.47 2024-05-29 22:07:54,643 - octoprint.server.util.sockjs - INFO - New connection from client: 192.168.86.47 2024-05-29 22:07:54,750 - octoprint.server.util.flask - INFO - Passively logging in user will from 192.168.86.26 2024-05-29 22:07:54,751 - octoprint.access.users - INFO - Logged in user: will 2024-05-29 22:07:55,171 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2024-05-29 22:07:55,173 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2024-05-29 22:07:55,189 - octoprint.util.pip - INFO - ==> pip ok -> yes 2024-05-29 22:07:55,257 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 53.4GB. That is considered sufficient for updating. 2024-05-29 22:07:55,336 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2024-05-29 22:07:55,363 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://OctoPrint.local:80/', 'accessToken': '59ADA74C5C6D4B569D522D08FD1C4AFF'}, 'printer': {'name': 'Default', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 200, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 0, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 30, 'useM600': False}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': True}, 'spoolManager': {'enabled': False}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'icon': 'home', 'command': 'G28', 'color': '#dcdde1', 'confirm': False, 'exit': True}, {'icon': 'ruler-vertical', 'command': 'G29', 'color': '#4bae50', 'confirm': False, 'exit': True}, {'icon': 'fire-alt', 'command': 'M140 S50; M104 S185', 'color': '#e1b12c', 'confirm': False, 'exit': True}, {'icon': 'snowflake', 'command': 'M140 S0; M104 S0', 'color': '#0097e6', 'confirm': False, 'exit': True}, {'icon': 'redo-alt', 'command': '[!RELOAD]', 'color': '#7f8fa6', 'confirm': True, 'exit': False}, {'icon': 'power-off', 'command': '[!SHUTDOWN]', 'color': '#e84118', 'confirm': True, 'exit': False}], 'fileSorting': {'attribute': 'name', 'order': 'asc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': False, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2024-05-29 22:07:55,444 - octoprint.server.util.sockjs - INFO - New connection from client: 192.168.86.26 2024-05-29 22:07:55,504 - octoprint.server.util.sockjs - INFO - User will logged in on the socket from client 192.168.86.26 2024-05-29 22:07:55,587 - octoprint.plugins.octoeverywhere - INFO - After startup called. Starting worker thread. 2024-05-29 22:07:55,599 - octoprint.plugins.octoeverywhere - INFO - Main thread starting 2024-05-29 22:07:55,646 - octoprint.plugins.octopod - INFO - OctoPod loaded! 2024-05-29 22:07:55,697 - octoprint.plugins.octoeverywhere - INFO - Frontend http port detected as 80, is https? False 2024-05-29 22:07:55,713 - octoprint.plugins.octoeverywhere - INFO - Attempting to use lowest latency server: wss://nyc.octoeverywhere.com/octoclientws 2024-05-29 22:07:55,714 - octoprint.plugins.octoeverywhere - INFO - Attempting to talk to OctoEverywhere, server con wss://nyc.octoeverywhere.com/octoclientws[1] wsId:2961429456 2024-05-29 22:07:55,851 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'http://192.168.86.26/', 'path': '/', 'query_string': 'l10n=en'} 2024-05-29 22:07:55,938 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2024-05-29 22:07:55,946 - octoprint.plugins.octoeverywhere - INFO - Connected To OctoEverywhere, server con wss://nyc.octoeverywhere.com/octoclientws[1]. Starting handshake... 2024-05-29 22:07:56,035 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 8, 'printer_state': 'DETECT_SERIAL'} 2024-05-29 22:07:56,231 - octoprint.plugins.octoeverywhere - INFO - Handshake complete, server con wss://nyc.octoeverywhere.com/octoclientws[1], successfully connected to OctoEverywhere! 2024-05-29 22:07:56,466 - octoprint.plugins.tracking - INFO - Sent tracking event pong, payload: {'version': '1.10.1', 'os': 'linux', 'bits': 32, 'python': '3.9.2', 'pip': '22.3', 'cores': 4, 'freq': 1800.0, 'ram': 1909604352, 'pi_model': 'Raspberry Pi 4 Model B Rev 1.5', 'octopi_version': '1.0.0', 'octopiuptodate_build': '1.0.0-1.10.1-20240514102430', 'plugins': 'ultimakerformatpackage:1.0.2,printtimegenius:2.3.3,octopod:0.3.16,octoeverywhere:3.3.5,octodashcompanion:0.0.7,displaylayerprogress:1.28.0', 'achievements': 'the_wizard,adventurer,one_small_step_for_man'} 2024-05-29 22:07:56,885 - octoprint.plugins.tracking - INFO - Sent tracking event startup, payload: {'version': '1.10.1', 'os': 'linux', 'bits': 32, 'python': '3.9.2', 'pip': '22.3', 'cores': 4, 'freq': 1800.0, 'ram': 1909604352, 'pi_model': 'Raspberry Pi 4 Model B Rev 1.5', 'octopi_version': '1.0.0', 'octopiuptodate_build': '1.0.0-1.10.1-20240514102430'} 2024-05-29 22:07:58,250 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2024-05-29 22:07:58,257 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2024-05-29 22:07:58,461 - octoprint.server.util.sockjs - INFO - Client connection closed: 192.168.86.47 2024-05-29 22:07:58,717 - octoprint.server.util.flask - INFO - Passively logging in user will from 127.0.0.1 2024-05-29 22:07:58,717 - octoprint.access.users - INFO - Logged in user: will 2024-05-29 22:07:58,941 - octoprint.server.util.sockjs - INFO - New connection from client: 192.168.86.47 2024-05-29 22:08:00,267 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 250000 2024-05-29 22:08:00,288 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2024-05-29 22:08:00,321 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2024-05-29 22:08:00,415 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Operational" 2024-05-29 22:08:00,490 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2024-05-29 22:08:00,611 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin 2.1.3 MRiscoC Ender3V2-427-BLTUBL-T13-MPC, based on bugfix-2.1.x (Jan 27 2024 14:32:55)" 2024-05-29 22:08:00,612 - octoprint.util.comm - INFO - Firmware info line: FIRMWARE_NAME:Marlin 2.1.3 MRiscoC Ender3V2-427-BLTUBL-T13-MPC, based on bugfix-2.1.x (Jan 27 2024 14:32:55) SOURCE_CODE_URL:github.com/mriscoc/Ender3V2S1 PROTOCOL_VERSION:1.0 MACHINE_TYPE:Ender3V2-427-BLTUBL-T13-MPC EXTRUDER_COUNT:1 UUID:cede2a2f-41a2-4748-9b12-c55c62f367ff 2024-05-29 22:08:00,697 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting 2024-05-29 22:08:00,745 - octoprint.util.comm - INFO - Firmware states that it supports emergency GCODEs to be sent without waiting for an acknowledgement first 2024-05-29 22:08:00,787 - octoprint.util.comm - INFO - Firmware states that it supports writing long filenames 2024-05-29 22:08:00,790 - octoprint.util.comm - INFO - Firmware states that it supports long filenames 2024-05-29 22:08:00,834 - octoprint.util.comm - INFO - Firmware sent the following capability report: SERIAL_XON_XOFF: not supported BINARY_FILE_TRANSFER: supported EEPROM: supported VOLUMETRIC: supported AUTOREPORT_POS: not supported AUTOREPORT_TEMP: supported PROGRESS: not supported PRINT_JOB: supported AUTOLEVEL: supported RUNOUT: supported Z_PROBE: supported LEVELING_DATA: supported BUILD_PERCENT: supported SOFTWARE_POWER: not supported TOGGLE_LIGHTS: not supported CASE_LIGHT_BRIGHTNESS: not supported EMERGENCY_PARSER: supported HOST_ACTION_COMMANDS: supported PROMPT_SUPPORT: supported SDCARD: supported MULTI_VOLUME: not supported REPEAT: not supported SD_WRITE: supported AUTOREPORT_SD_STATUS: not supported LONG_FILENAME: supported LFN_WRITE: supported CUSTOM_FIRMWARE_UPLOAD: supported EXTENDED_M20: supported THERMAL_PROTECTION: supported MOTION_MODES: not supported ARCS: supported BABYSTEPPING: supported EP_BABYSTEP: not supported CHAMBER_TEMPERATURE: not supported COOLER_TEMPERATURE: not supported MEATPACK: not supported CONFIG_EXPORT: not supported 2024-05-29 22:08:01,179 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {'firmware_name': 'Marlin 2.1.3 MRiscoC Ender3V2-427-BLTUBL-T13-MPC, based on bugfix-2.1.x (Jan 27 2024 14:32:55)', 'printer_port': None, 'printer_baudrate': 0} 2024-05-29 22:08:06,343 - octoprint.access.users - INFO - Logged in user: will 2024-05-29 22:08:06,344 - octoprint.server.api - INFO - Actively logging in user will from 192.168.86.47 2024-05-29 22:08:06,439 - octoprint.server.util.flask - INFO - Passively logging in user will from 192.168.86.47 2024-05-29 22:08:06,439 - octoprint.access.users - INFO - Logged in user: will 2024-05-29 22:08:08,196 - octoprint.server.preemptive_cache - INFO - ... done in 12.35s 2024-05-29 22:08:08,197 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'https://127.0.0.1:5000/', 'path': '/', 'query_string': 'l10n=en'} 2024-05-29 22:08:08,528 - octoprint.server.preemptive_cache - INFO - ... done in 0.33s 2024-05-29 22:08:08,871 - octoprint.server.util.sockjs - INFO - Client connection closed: 192.168.86.47 2024-05-29 22:08:09,127 - octoprint.plugins.octoeverywhere - INFO - Slipstream took 13.481650829315186 to fully update the cache 2024-05-29 22:08:09,283 - octoprint.server.util.sockjs - INFO - New connection from client: 192.168.86.47 2024-05-29 22:08:09,350 - octoprint.server.util.flask - INFO - Passively logging in user will from 192.168.86.47 2024-05-29 22:08:09,351 - octoprint.access.users - INFO - Logged in user: will 2024-05-29 22:08:09,460 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2024-05-29 22:08:09,462 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://OctoPrint.local:80/', 'accessToken': '59ADA74C5C6D4B569D522D08FD1C4AFF'}, 'printer': {'name': 'Default', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 200, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 0, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 30, 'useM600': False}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': True}, 'spoolManager': {'enabled': False}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'icon': 'home', 'command': 'G28', 'color': '#dcdde1', 'confirm': False, 'exit': True}, {'icon': 'ruler-vertical', 'command': 'G29', 'color': '#4bae50', 'confirm': False, 'exit': True}, {'icon': 'fire-alt', 'command': 'M140 S50; M104 S185', 'color': '#e1b12c', 'confirm': False, 'exit': True}, {'icon': 'snowflake', 'command': 'M140 S0; M104 S0', 'color': '#0097e6', 'confirm': False, 'exit': True}, {'icon': 'redo-alt', 'command': '[!RELOAD]', 'color': '#7f8fa6', 'confirm': True, 'exit': False}, {'icon': 'power-off', 'command': '[!SHUTDOWN]', 'color': '#e84118', 'confirm': True, 'exit': False}], 'fileSorting': {'attribute': 'name', 'order': 'asc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': False, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2024-05-29 22:08:09,582 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2024-05-29 22:08:09,584 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://OctoPrint.local:80/', 'accessToken': '59ADA74C5C6D4B569D522D08FD1C4AFF'}, 'printer': {'name': 'Default', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 200, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 0, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 30, 'useM600': False}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': True}, 'spoolManager': {'enabled': False}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'icon': 'home', 'command': 'G28', 'color': '#dcdde1', 'confirm': False, 'exit': True}, {'icon': 'ruler-vertical', 'command': 'G29', 'color': '#4bae50', 'confirm': False, 'exit': True}, {'icon': 'fire-alt', 'command': 'M140 S50; M104 S185', 'color': '#e1b12c', 'confirm': False, 'exit': True}, {'icon': 'snowflake', 'command': 'M140 S0; M104 S0', 'color': '#0097e6', 'confirm': False, 'exit': True}, {'icon': 'redo-alt', 'command': '[!RELOAD]', 'color': '#7f8fa6', 'confirm': True, 'exit': False}, {'icon': 'power-off', 'command': '[!SHUTDOWN]', 'color': '#e84118', 'confirm': True, 'exit': False}], 'fileSorting': {'attribute': 'name', 'order': 'asc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': False, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2024-05-29 22:08:09,951 - octoprint.server.util.sockjs - INFO - User will logged in on the socket from client 192.168.86.47 2024-05-29 22:08:11,244 - octoprint.plugins.tracking - INFO - Sent tracking event webui_load, payload: {'browser_name': 'Chrome', 'browser_version': '124.0.0.0', 'os_name': 'Windows', 'os_version': '10'} 2024-05-29 22:08:11,565 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk 2024-05-29 22:08:31,242 - octoprint.plugins.octoeverywhere - INFO - Starting a secondary connection to wss://tor.octoeverywhere.com/octoclientws method 2 2024-05-29 22:08:31,248 - octoprint.plugins.octoeverywhere - INFO - Attempting to talk to OctoEverywhere, server con wss://tor.octoeverywhere.com/octoclientws[1] wsId:2929794088 2024-05-29 22:08:31,436 - octoprint.plugins.octoeverywhere - INFO - Connected To OctoEverywhere, server con wss://tor.octoeverywhere.com/octoclientws[1]. Starting handshake... 2024-05-29 22:08:31,635 - octoprint.plugins.octoeverywhere - INFO - Handshake complete, server con wss://tor.octoeverywhere.com/octoclientws[1], successfully connected to OctoEverywhere! 2024-05-29 22:08:31,668 - octoprint.server.util.sockjs - INFO - New connection from client: 127.0.0.1 2024-05-29 22:08:31,721 - octoprint.plugins.octoeverywhere - INFO - Web Stream ws [4] opened, attempt 1 after 0.17183613777160645 seconds 2024-05-29 22:08:31,723 - octoprint.plugins.octoeverywhere - INFO - Web Stream ws [4] first message sent to local server after 0.17344951629638672 seconds 2024-05-29 22:08:31,796 - octoprint.server.util.flask - INFO - Passively logging in user will from 127.0.0.1 2024-05-29 22:08:31,797 - octoprint.access.users - INFO - Logged in user: will 2024-05-29 22:08:31,880 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2024-05-29 22:08:31,894 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://OctoPrint.local:80/', 'accessToken': '59ADA74C5C6D4B569D522D08FD1C4AFF'}, 'printer': {'name': 'Default', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 200, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 0, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 30, 'useM600': False}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': True}, 'spoolManager': {'enabled': False}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'icon': 'home', 'command': 'G28', 'color': '#dcdde1', 'confirm': False, 'exit': True}, {'icon': 'ruler-vertical', 'command': 'G29', 'color': '#4bae50', 'confirm': False, 'exit': True}, {'icon': 'fire-alt', 'command': 'M140 S50; M104 S185', 'color': '#e1b12c', 'confirm': False, 'exit': True}, {'icon': 'snowflake', 'command': 'M140 S0; M104 S0', 'color': '#0097e6', 'confirm': False, 'exit': True}, {'icon': 'redo-alt', 'command': '[!RELOAD]', 'color': '#7f8fa6', 'confirm': True, 'exit': False}, {'icon': 'power-off', 'command': '[!SHUTDOWN]', 'color': '#e84118', 'confirm': True, 'exit': False}], 'fileSorting': {'attribute': 'name', 'order': 'asc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': False, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2024-05-29 22:08:32,034 - octoprint.server.util.sockjs - INFO - User will logged in on the socket from client 127.0.0.1 2024-05-29 22:08:32,047 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2024-05-29 22:08:32,065 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://OctoPrint.local:80/', 'accessToken': '59ADA74C5C6D4B569D522D08FD1C4AFF'}, 'printer': {'name': 'Default', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 200, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 0, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 30, 'useM600': False}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': True}, 'spoolManager': {'enabled': False}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'icon': 'home', 'command': 'G28', 'color': '#dcdde1', 'confirm': False, 'exit': True}, {'icon': 'ruler-vertical', 'command': 'G29', 'color': '#4bae50', 'confirm': False, 'exit': True}, {'icon': 'fire-alt', 'command': 'M140 S50; M104 S185', 'color': '#e1b12c', 'confirm': False, 'exit': True}, {'icon': 'snowflake', 'command': 'M140 S0; M104 S0', 'color': '#0097e6', 'confirm': False, 'exit': True}, {'icon': 'redo-alt', 'command': '[!RELOAD]', 'color': '#7f8fa6', 'confirm': True, 'exit': False}, {'icon': 'power-off', 'command': '[!SHUTDOWN]', 'color': '#e84118', 'confirm': True, 'exit': False}], 'fileSorting': {'attribute': 'name', 'order': 'asc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': False, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2024-05-29 22:08:32,970 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2024-05-29 22:08:32,975 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://OctoPrint.local:80/', 'accessToken': '59ADA74C5C6D4B569D522D08FD1C4AFF'}, 'printer': {'name': 'Default', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 200, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 0, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 30, 'useM600': False}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': True}, 'spoolManager': {'enabled': False}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'icon': 'home', 'command': 'G28', 'color': '#dcdde1', 'confirm': False, 'exit': True}, {'icon': 'ruler-vertical', 'command': 'G29', 'color': '#4bae50', 'confirm': False, 'exit': True}, {'icon': 'fire-alt', 'command': 'M140 S50; M104 S185', 'color': '#e1b12c', 'confirm': False, 'exit': True}, {'icon': 'snowflake', 'command': 'M140 S0; M104 S0', 'color': '#0097e6', 'confirm': False, 'exit': True}, {'icon': 'redo-alt', 'command': '[!RELOAD]', 'color': '#7f8fa6', 'confirm': True, 'exit': False}, {'icon': 'power-off', 'command': '[!SHUTDOWN]', 'color': '#e84118', 'confirm': True, 'exit': False}], 'fileSorting': {'attribute': 'name', 'order': 'asc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': False, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2024-05-29 22:08:33,145 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2024-05-29 22:08:33,146 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://OctoPrint.local:80/', 'accessToken': '59ADA74C5C6D4B569D522D08FD1C4AFF'}, 'printer': {'name': 'Default', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 200, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 0, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 30, 'useM600': False}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': True}, 'spoolManager': {'enabled': False}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'icon': 'home', 'command': 'G28', 'color': '#dcdde1', 'confirm': False, 'exit': True}, {'icon': 'ruler-vertical', 'command': 'G29', 'color': '#4bae50', 'confirm': False, 'exit': True}, {'icon': 'fire-alt', 'command': 'M140 S50; M104 S185', 'color': '#e1b12c', 'confirm': False, 'exit': True}, {'icon': 'snowflake', 'command': 'M140 S0; M104 S0', 'color': '#0097e6', 'confirm': False, 'exit': True}, {'icon': 'redo-alt', 'command': '[!RELOAD]', 'color': '#7f8fa6', 'confirm': True, 'exit': False}, {'icon': 'power-off', 'command': '[!SHUTDOWN]', 'color': '#e84118', 'confirm': True, 'exit': False}], 'fileSorting': {'attribute': 'name', 'order': 'asc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': False, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2024-05-29 22:08:47,375 - octoprint.plugins.DisplayLayerProgress - INFO - Limit of 750 reached and no M117 INDICATOR-Layer found 2024-05-29 22:08:47,377 - octoprint.plugins.DisplayLayerProgress - INFO - FilePreProcessor. Checking LayerExpressions. 2024-05-29 22:08:47,378 - octoprint.plugins.DisplayLayerProgress - INFO - FilePreProcessor. LayerExpression valid. Start processing... 2024-05-29 22:08:47,652 - octoprint.filemanager.analysis - INFO - Starting analysis of local:ringing_tower_46m_0.20mm_205C_PLA_ENDER3.gcode 2024-05-29 22:08:47,673 - octoprint.printer.standard.job - INFO - Print job selected - origin: local, path: ringing_tower_46m_0.20mm_205C_PLA_ENDER3.gcode, owner: will, user: will 2024-05-29 22:08:47,704 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting" 2024-05-29 22:08:47,712 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: ringing_tower_46m_0.20mm_205C_PLA_ENDER3.gcode, owner: will, user: will 2024-05-29 22:08:47,732 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2024-05-29 22:08:47,800 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Printing" 2024-05-29 22:08:47,818 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile 2024-05-29 22:08:47,852 - octoprint.plugins.DisplayLayerProgress - INFO - Did NOT reading total height from MetaFile, because analyse was done for not selected file. Current: '-' Analyse for: 'ringing_tower_46m_0.20mm_205C_PLA_ENDER3.gcode' 2024-05-29 22:08:47,921 - octoprint.plugins.DisplayLayerProgress - INFO - File '/home/pi/.octoprint/uploads/ringing_tower_46m_0.20mm_205C_PLA_ENDER3.gcode' selected. Determining number of layers. 2024-05-29 22:08:47,942 - octoprint.plugins.DisplayLayerProgress - INFO - Read total height from MetaFile 2024-05-29 22:08:47,949 - octoprint.plugins.DisplayLayerProgress - INFO - Total height not found in MetaFile 2024-05-29 22:08:48,093 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile 2024-05-29 22:08:48,107 - octoprint.plugins.DisplayLayerProgress - INFO - File select-event processing done!' 2024-05-29 22:08:48,158 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2024-05-29 22:08:48,462 - octoprint.plugins.DisplayLayerProgress - INFO - Printing started. Detailed progress started.{'name': 'ringing_tower_46m_0.20mm_205C_PLA_ENDER3.gcode', 'path': 'ringing_tower_46m_0.20mm_205C_PLA_ENDER3.gcode', 'origin': 'local', 'size': 620225, 'owner': 'will', 'user': 'will'} 2024-05-29 22:08:48,740 - octoprint.plugins.octoeverywhere - INFO - Gadget is now watching! 2024-05-29 22:08:48,781 - octoprint.plugins.octoeverywhere - INFO - New print started; PrintId: ZdlDOqCPBgU9vIfozOXybESh6jIJHgXBL3lr03stSFpFjU0OQybuSJee5VWH file:ringing_tower_46m_0.20mm_205C_PLA_ENDER3.gcode size:605.6884765625 filament:0 2024-05-29 22:08:49,490 - octoprint.plugins.octoeverywhere - INFO - Web Stream ws [4] websocket closed after 17.940436601638794 seconds 2024-05-29 22:08:49,495 - octoprint.plugins.tracking - INFO - Sent tracking event print_started, payload: {'origin': 'local', 'file': '2098d611be79bc41754d8138ea53738d34dfbdb7'} 2024-05-29 22:08:49,498 - octoprint.server.util.sockjs - INFO - Client connection closed: 127.0.0.1 2024-05-29 22:08:49,787 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2024-05-29 22:08:49,811 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile 2024-05-29 22:08:49,822 - octoprint.plugins.DisplayLayerProgress - INFO - Read total height from MetaFile 2024-05-29 22:08:49,844 - octoprint.filemanager.analysis - INFO - Analysis of entry local:ringing_tower_46m_0.20mm_205C_PLA_ENDER3.gcode finished, needed 2.19s 2024-05-29 22:08:49,857 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile 2024-05-29 22:08:49,866 - octoprint.plugins.DisplayLayerProgress - INFO - Read total height from MetaFile 2024-05-29 22:08:49,873 - octoprint.plugins.octoeverywhere - INFO - NotificationsHandler successfully sent 'started' 2024-05-29 22:08:49,955 - octoprint.util.comm - INFO - Printer seems to support the busy protocol, will adjust timeouts and set busy interval accordingly 2024-05-29 22:09:18,008 - octoprint.util.comm - INFO - Telling the printer to set the busy interval to our "communicationBusy" timeout - 1s = 2s 2024-05-29 22:09:18,098 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2024-05-29 22:09:18,100 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://OctoPrint.local:80/', 'accessToken': '59ADA74C5C6D4B569D522D08FD1C4AFF'}, 'printer': {'name': 'Default', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 200, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 0, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 30, 'useM600': False}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': True}, 'spoolManager': {'enabled': False}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'icon': 'home', 'command': 'G28', 'color': '#dcdde1', 'confirm': False, 'exit': True}, {'icon': 'ruler-vertical', 'command': 'G29', 'color': '#4bae50', 'confirm': False, 'exit': True}, {'icon': 'fire-alt', 'command': 'M140 S50; M104 S185', 'color': '#e1b12c', 'confirm': False, 'exit': True}, {'icon': 'snowflake', 'command': 'M140 S0; M104 S0', 'color': '#0097e6', 'confirm': False, 'exit': True}, {'icon': 'redo-alt', 'command': '[!RELOAD]', 'color': '#7f8fa6', 'confirm': True, 'exit': False}, {'icon': 'power-off', 'command': '[!SHUTDOWN]', 'color': '#e84118', 'confirm': True, 'exit': False}], 'fileSorting': {'attribute': 'name', 'order': 'asc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': False, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2024-05-29 22:09:18,147 - octoprint.server.util.sockjs - INFO - New connection from client: 127.0.0.1 2024-05-29 22:09:18,211 - octoprint.plugins.octoeverywhere - INFO - Web Stream ws [24] opened, attempt 1 after 0.2656729221343994 seconds 2024-05-29 22:09:18,217 - octoprint.plugins.octoeverywhere - INFO - Web Stream ws [24] first message sent to local server after 0.272052526473999 seconds 2024-05-29 22:09:18,232 - octoprint.server.util.flask - INFO - Passively logging in user will from 127.0.0.1 2024-05-29 22:09:18,240 - octoprint.access.users - INFO - Logged in user: will 2024-05-29 22:09:18,370 - octoprint.server.util.sockjs - INFO - User will logged in on the socket from client 127.0.0.1 2024-05-29 22:09:20,130 - octoprint.plugins.octoeverywhere - INFO - Gadget HostLock set to: gadget-tor.octoeverywhere.com 2024-05-29 22:09:31,877 - octoprint.plugins.octoeverywhere - INFO - Web Stream ws [24] websocket closed after 13.931809186935425 seconds 2024-05-29 22:09:31,888 - octoprint.server.util.sockjs - INFO - Client connection closed: 127.0.0.1 2024-05-29 22:10:28,566 - octoprint.util.comm - ERROR - Unexpected error while reading from serial port Traceback (most recent call last): File "/home/pi/oprint/lib/python3.9/site-packages/octoprint/util/comm.py", line 4172, in _readline ret = self._serial.readline() File "/home/pi/oprint/lib/python3.9/site-packages/octoprint/util/comm.py", line 6931, in readline c = self.read(1) File "/home/pi/oprint/lib/python3.9/site-packages/serial/serialposix.py", line 595, in read raise SerialException( serial.serialutil.SerialException: device reports readiness to read but returned no data (device disconnected or multiple access on port?) 2024-05-29 22:10:28,612 - octoprint.util.comm - ERROR - Please see https://faq.octoprint.org/serialerror for possible reasons of this. 2024-05-29 22:10:28,632 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Offline after error" 2024-05-29 22:10:28,659 - octoprint.server - INFO - Starting autorefresh of serial port list 2024-05-29 22:10:28,682 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2024-05-29 22:10:28,691 - octoprint.server - INFO - Serial port list was updated, refreshing the port list in the frontend 2024-05-29 22:10:28,745 - octoprint.plugins.achievements - INFO - New achievement unlocked: All Beginnings Are Hard! 2024-05-29 22:10:28,811 - octoprint.plugins.octoeverywhere - WARNING - ShouldPrintingTimersBeRunning is not in a printing state: OFFLINE 2024-05-29 22:10:28,812 - octoprint.plugins.octoeverywhere - INFO - First layer timer is done. Stopping. 2024-05-29 22:10:28,812 - octoprint.plugins.octoeverywhere - INFO - RepeatTimer thread exit 2024-05-29 22:10:28,836 - octoprint.plugins.DisplayLayerProgress - INFO - Printing stopped. Detailed progress stopped. 2024-05-29 22:10:28,865 - octoprint.plugins.octoeverywhere - INFO - Gadget has stopped watching! 2024-05-29 22:10:28,867 - octoprint.plugins.octoeverywhere - INFO - RepeatTimer thread exit 2024-05-29 22:10:28,870 - octoprint.plugins.octoeverywhere - INFO - RepeatTimer thread exit 2024-05-29 22:10:29,700 - octoprint.server - INFO - Serial port list was updated, refreshing the port list in the frontend 2024-05-29 22:10:29,710 - octoprint.plugins.octoeverywhere - INFO - NotificationsHandler successfully sent 'failed' 2024-05-29 22:10:34,318 - octoprint.plugins.tracking - INFO - Sent tracking event print_failed, payload: {'origin': 'local', 'file': '2098d611be79bc41754d8138ea53738d34dfbdb7', 'elapsed': 100, 'reason': 'error', 'commerror_text': 'SerialException: device reports readiness to read but returned no data (device disconnected or multiple access on port?)'} 2024-05-29 22:10:34,725 - octoprint.plugins.tracking - INFO - Sent tracking event achievement_unlocked, payload: {'achievement': 'all_beginnings_are_hard'}