pi@octopi-curly:~ $ dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.15.43-v7+ (dom@buildbot) (arm-linux-gnueabihf-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1558 SMP Thu May 26 16:10:12 BST 2022 [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2 [ 0.000000] random: fast init done [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] Reserved memory: created CMA memory pool at 0x34000000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x0000000037ffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000037ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000037ffffff] [ 0.000000] percpu: Embedded 16 pages/cpu s35660 r8192 d21684 u65536 [ 0.000000] pcpu-alloc: s35660 r8192 d21684 u65536 alloc=16*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 227360 [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=4adcecfe-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait [ 0.000000] Kernel parameter elevator= does not have any effect anymore. Please use sysfs to set IO scheduler for individual devices. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 826340K/917504K available (10240K kernel code, 1338K rwdata, 3068K rodata, 1024K init, 569K bss, 25628K reserved, 65536K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 33199 entries in 98 pages [ 0.000000] ftrace: allocated 98 pages with 3 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] random: get_random_bytes called from start_kernel+0x538/0x724 with crng_init=1 [ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000001] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000023] Switching to timer-based delay loop, resolution 52ns [ 0.000336] Console: colour dummy device 80x30 [ 0.001209] printk: console [tty1] enabled [ 0.001291] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [ 0.001351] pid_max: default: 32768 minimum: 301 [ 0.001531] LSM: Security Framework initializing [ 0.001788] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.001842] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.003356] cgroup: Disabling memory control group subsystem [ 0.003656] CPU: Testing write buffer coherency: ok [ 0.004183] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.005529] Setting up static identity map for 0x100000 - 0x10003c [ 0.005737] rcu: Hierarchical SRCU implementation. [ 0.006657] smp: Bringing up secondary CPUs ... [ 0.007783] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.009029] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.010327] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.010476] smp: Brought up 1 node, 4 CPUs [ 0.010534] SMP: Total of 4 processors activated (153.60 BogoMIPS). [ 0.010569] CPU: All CPU(s) started in HYP mode. [ 0.010597] CPU: Virtualization extensions available. [ 0.011463] devtmpfs: initialized [ 0.029784] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4 [ 0.030105] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.030172] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.033241] pinctrl core: initialized pinctrl subsystem [ 0.034587] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.038953] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.044714] audit: initializing netlink subsys (disabled) [ 0.045010] audit: type=2000 audit(0.040:1): state=initialized audit_enabled=0 res=1 [ 0.045619] thermal_sys: Registered thermal governor 'step_wise' [ 0.046642] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.046710] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.046983] Serial: AMBA PL011 UART driver [ 0.055028] bcm2835-mbox 3f00b880.mailbox: mailbox enabled [ 0.080104] raspberrypi-firmware soc:firmware: Attached to firmware from 2022-05-24T13:26:52, variant start_x [ 0.090121] raspberrypi-firmware soc:firmware: Firmware hash is 2c647ef4127e289d4a0cb5cfbb22855bfb7f1723 [ 0.139351] Kprobes globally optimized [ 0.144229] bcm2835-dma 3f007000.dma: DMA legacy API manager, dmachans=0x1 [ 0.146499] SCSI subsystem initialized [ 0.146791] usbcore: registered new interface driver usbfs [ 0.146880] usbcore: registered new interface driver hub [ 0.146973] usbcore: registered new device driver usb [ 0.147311] usb_phy_generic phy: supply vcc not found, using dummy regulator [ 0.147548] usb_phy_generic phy: dummy supplies not allowed for exclusive requests [ 0.147844] pps_core: LinuxPPS API ver. 1 registered [ 0.147878] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.147937] PTP clock support registered [ 0.150077] clocksource: Switched to clocksource arch_sys_counter [ 0.213828] VFS: Disk quotas dquot_6.6.0 [ 0.213973] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.214180] FS-Cache: Loaded [ 0.214431] CacheFiles: Loaded [ 0.224431] NET: Registered PF_INET protocol family [ 0.224706] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.226337] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 0.226424] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.226572] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.226790] TCP: Hash tables configured (established 8192 bind 8192) [ 0.226971] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.227052] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.227375] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.228453] RPC: Registered named UNIX socket transport module. [ 0.228492] RPC: Registered udp transport module. [ 0.228522] RPC: Registered tcp transport module. [ 0.228551] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.762277] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available [ 1.801020] Initialise system trusted keyrings [ 1.801361] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 1.811301] zbud: loaded [ 1.813557] FS-Cache: Netfs 'nfs' registered for caching [ 1.814508] NFS: Registering the id_resolver key type [ 1.814583] Key type id_resolver registered [ 1.814613] Key type id_legacy registered [ 1.814775] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.814813] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.816113] Key type asymmetric registered [ 1.816147] Asymmetric key parser 'x509' registered [ 1.816257] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.816300] io scheduler mq-deadline registered [ 1.816331] io scheduler kyber registered [ 1.822457] bcm2708_fb soc:fb: FB found 1 display(s) [ 1.833260] Console: switching to colour frame buffer device 82x26 [ 1.840467] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 656x416 [ 1.850353] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled [ 1.855144] bcm2835-rng 3f104000.rng: hwrng registered [ 1.858170] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) [ 1.864568] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000 [ 1.882550] brd: module loaded [ 1.895282] loop: module loaded [ 1.898634] Loading iSCSI transport class v2.0-870. [ 1.903282] usbcore: registered new interface driver lan78xx [ 1.905995] usbcore: registered new interface driver smsc95xx [ 1.908590] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 2.639946] Core Release: 2.80a [ 2.642501] Setting default values for core params [ 2.645012] Finished setting default values for core params [ 2.847870] Using Buffer DMA mode [ 2.850409] Periodic Transfer Interrupt Enhancement - disabled [ 2.853012] Multiprocessor Interrupt Enhancement - disabled [ 2.855599] OTG VER PARAM: 0, OTG VER FLAG: 0 [ 2.858163] Dedicated Tx FIFOs mode [ 2.861257] WARN::dwc_otg_hcd_init:1074: FIQ DMA bounce buffers: virt = b4104000 dma = 0xf4104000 len=9024 [ 2.868368] FIQ FSM acceleration enabled for : Non-periodic Split Transactions Periodic Split Transactions High-Speed Isochronous Endpoints Interrupt/Control Split Transaction hack enabled [ 2.879360] dwc_otg: Microframe scheduler enabled [ 2.879495] WARN::hcd_init_fiq:457: FIQ on core 1 [ 2.883807] WARN::hcd_init_fiq:458: FIQ ASM at 807f4c78 length 36 [ 2.888243] WARN::hcd_init_fiq:497: MPHI regs_base at b8810000 [ 2.892710] dwc_otg 3f980000.usb: DWC OTG Controller [ 2.895018] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1 [ 2.897389] dwc_otg 3f980000.usb: irq 89, io mem 0x00000000 [ 2.899707] Init: Port Power? op_state=1 [ 2.901951] Init: Power Port (0) [ 2.904441] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 2.909030] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.911519] usb usb1: Product: DWC OTG Controller [ 2.913875] usb usb1: Manufacturer: Linux 5.15.43-v7+ dwc_otg_hcd [ 2.916264] usb usb1: SerialNumber: 3f980000.usb [ 2.919393] hub 1-0:1.0: USB hub found [ 2.921855] hub 1-0:1.0: 1 port detected [ 2.925075] dwc_otg: FIQ enabled [ 2.925090] dwc_otg: NAK holdoff enabled [ 2.925102] dwc_otg: FIQ split-transaction FSM enabled [ 2.925120] Module dwc_common_port init [ 2.925450] usbcore: registered new interface driver usb-storage [ 2.928085] mousedev: PS/2 mouse device common for all mice [ 2.933740] sdhci: Secure Digital Host Controller Interface driver [ 2.936217] sdhci: Copyright(c) Pierre Ossman [ 2.939085] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.944341] ledtrig-cpu: registered to indicate activity on CPUs [ 2.947141] hid: raw HID events driver (C) Jiri Kosina [ 2.949754] usbcore: registered new interface driver usbhid [ 2.952263] usbhid: USB HID core driver [ 2.959894] Initializing XFRM netlink socket [ 2.962426] NET: Registered PF_PACKET protocol family [ 2.964985] Key type dns_resolver registered [ 2.968078] Registering SWP/SWPB emulation handler [ 2.971237] registered taskstats version 1 [ 2.973539] Loading compiled-in X.509 certificates [ 2.976563] Key type ._fscrypt registered [ 2.978737] Key type .fscrypt registered [ 2.980903] Key type fscrypt-provisioning registered [ 2.994541] uart-pl011 3f201000.serial: cts_event_workaround enabled [ 2.996928] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 114, base_baud = 0) is a PL011 rev2 [ 3.003403] bcm2835-aux-uart 3f215040.serial: there is not valid maps for state default [ 3.008764] printk: console [ttyS0] disabled [ 3.011303] 3f215040.serial: ttyS0 at MMIO 0x3f215040 (irq = 86, base_baud = 50000000) is a 16550 [ 3.051938] Indeed it is in host mode hprt0 = 00021501 [ 3.260108] usb 1-1: new high-speed USB device number 2 using dwc_otg [ 3.262646] printk: console [ttyS0] enabled [ 3.270447] Indeed it is in host mode hprt0 = 00001101 [ 3.291233] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 3.540422] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 [ 3.542941] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 3.549313] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.554924] mmc-bcm2835 3f300000.mmcnr: mmc_debug:0 mmc_debug2:0 [ 3.559462] hub 1-1:1.0: USB hub found [ 3.564103] mmc-bcm2835 3f300000.mmcnr: DMA channel allocated [ 3.715594] mmc1: new high speed SDIO card at address 0001 [ 3.718154] hub 1-1:1.0: 5 ports detected [ 4.263167] sdhost: log_buf @ (ptrval) (f4107000) [ 4.319359] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1) [ 4.350473] of_cfs_init [ 4.355851] of_cfs_init: OK [ 4.364973] Waiting for root device PARTUUID=4adcecfe-02... [ 4.433387] mmc0: host does not support reading read-only switch, assuming write-enable [ 4.453148] mmc0: new high speed SDHC card at address aaaa [ 4.462432] mmcblk0: mmc0:aaaa SP32G 29.7 GiB [ 4.474791] mmcblk0: p1 p2 [ 4.480889] mmcblk0: mmc0:aaaa SP32G 29.7 GiB [ 4.505128] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [ 4.520319] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 4.539681] devtmpfs: mounted [ 4.553566] Freeing unused kernel image (initmem) memory: 1024K [ 4.562649] Run /sbin/init as init process [ 4.569323] with arguments: [ 4.569335] /sbin/init [ 4.569347] with environment: [ 4.569357] HOME=/ [ 4.569368] TERM=linux [ 4.590124] usb 1-1.1: new high-speed USB device number 3 using dwc_otg [ 4.720493] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 [ 4.734288] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.747500] smsc95xx v2.0.0 [ 5.164070] systemd[1]: System time before build time, advancing clock. [ 5.203292] SMSC LAN8700 usb-001:003:01: attached PHY driver (mii_bus:phy_addr=usb-001:003:01, irq=POLL) [ 5.219873] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:3e:1f:f7 [ 5.330142] usb 1-1.3: new full-speed USB device number 4 using dwc_otg [ 5.374817] NET: Registered PF_INET6 protocol family [ 5.384755] Segment Routing with IPv6 [ 5.391579] In-situ OAM (IOAM) with IPv6 [ 5.476900] usb 1-1.3: New USB device found, idVendor=10c4, idProduct=ea60, bcdDevice= 1.00 [ 5.491598] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5.502236] usb 1-1.3: Product: CP2102 USB to UART Bridge Controller [ 5.502257] usb 1-1.3: Manufacturer: Silicon Labs [ 5.519637] usb 1-1.3: SerialNumber: 0001 [ 5.527279] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 5.571830] systemd[1]: Detected architecture arm. [ 5.659417] systemd[1]: Set hostname to . [ 5.680163] usb 1-1.5: new high-speed USB device number 5 using dwc_otg [ 5.822066] usb 1-1.5: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=32.98 [ 5.836300] usb 1-1.5: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 5.846740] usb 1-1.5: Product: USB2.0 Hub [ 5.871155] hub 1-1.5:1.0: USB hub found [ 5.878705] hub 1-1.5:1.0: 4 ports detected [ 6.230176] usb 1-1.5.1: new high-speed USB device number 6 using dwc_otg [ 6.522971] usb 1-1.5.1: New USB device found, idVendor=0c45, idProduct=6366, bcdDevice= 1.00 [ 6.537004] usb 1-1.5.1: New USB device strings: Mfr=2, Product=1, SerialNumber=3 [ 6.550201] usb 1-1.5.1: Product: USB Camera [ 6.557337] usb 1-1.5.1: Manufacturer: USB Camera [ 6.564839] usb 1-1.5.1: SerialNumber: SN0001 [ 6.596268] random: systemd: uninitialized urandom read (16 bytes read) [ 6.617473] random: systemd: uninitialized urandom read (16 bytes read) [ 6.630742] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 6.643202] random: systemd: uninitialized urandom read (16 bytes read) [ 6.653422] systemd[1]: Listening on udev Control Socket. [ 6.666174] systemd[1]: Created slice User and Session Slice. [ 6.670133] usb 1-1.5.2: new high-speed USB device number 7 using dwc_otg [ 6.687606] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 6.701191] systemd[1]: Listening on Journal Socket (/dev/log). [ 6.713820] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 6.731941] systemd[1]: Listening on Journal Audit Socket. [ 6.849714] usb 1-1.5.2: New USB device found, idVendor=0c45, idProduct=636b, bcdDevice= 1.00 [ 6.849763] usb 1-1.5.2: New USB device strings: Mfr=2, Product=1, SerialNumber=3 [ 6.849795] usb 1-1.5.2: Product: USB 2.0 Camera [ 6.849811] usb 1-1.5.2: Manufacturer: Sonix Technology Co., Ltd. [ 6.849833] usb 1-1.5.2: SerialNumber: SN0001 [ 7.048307] i2c_dev: i2c /dev entries driver [ 7.543331] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null). Quota mode: none. [ 7.698189] systemd-journald[115]: Received request to flush runtime journal from PID 1 [ 8.176147] mc: Linux media interface: v0.10 [ 8.326330] videodev: Linux video capture interface: v2.00 [ 8.470252] usb 1-1.5.1: 3:1: cannot get freq at ep 0x84 [ 8.656000] usb 1-1.5.2: 3:1: cannot get freq at ep 0x84 [ 8.660656] usb 1-1.5.1: Found UVC 1.00 device USB Camera (0c45:6366) [ 8.661035] usbcore: registered new interface driver snd-usb-audio [ 8.701384] input: USB Camera: USB Camera as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/input/input0 [ 8.702641] usb 1-1.5.2: Found UVC 1.00 device USB 2.0 Camera (0c45:636b) [ 8.717838] input: USB 2.0 Camera: USB Camera as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5.2/1-1.5.2:1.0/input/input1 [ 8.718327] usbcore: registered new interface driver uvcvideo [ 8.888851] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [ 8.889950] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [ 8.899463] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [ 8.899795] bcm2835_vc_sm_cma_probe: Videocore shared memory driver [ 8.899821] [vc_sm_connected_init]: start [ 8.903965] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 8.907865] [vc_sm_connected_init]: installed successfully [ 8.933906] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [ 8.938108] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 8.942122] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 8.943976] bcm2835_audio bcm2835_audio: card created with 8 channels [ 8.974721] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 8.979602] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [ 9.008745] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned. [ 9.009635] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [ 9.381975] usbcore: registered new interface driver usbserial_generic [ 9.382063] usbserial: USB Serial support registered for generic [ 9.396503] usbcore: registered new interface driver cp210x [ 9.396600] usbserial: USB Serial support registered for cp210x [ 9.396785] cp210x 1-1.3:1.0: cp210x converter detected [ 9.454210] usb 1-1.3: cp210x converter now attached to ttyUSB0 [ 9.505305] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 9.641455] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [ 9.641520] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [ 9.649143] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 [ 9.649202] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [ 9.649627] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13 [ 9.653027] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14 [ 9.653668] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15 [ 9.659924] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16 [ 9.659979] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [ 9.660008] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [ 9.660031] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [ 9.660257] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [ 9.664309] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 [ 9.664377] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [ 9.675377] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 9.681041] bcm2835-codec bcm2835-codec: Device registered as /dev/video18 [ 9.681242] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx [ 9.682796] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video20 [ 9.689841] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video21 [ 9.690670] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video22 [ 9.691786] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video23 [ 9.691835] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [ 9.691873] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [ 9.692191] bcm2835-codec bcm2835-codec: Device registered as /dev/video31 [ 9.692234] bcm2835-codec bcm2835-codec: Loaded V4L2 encode_image [ 9.692369] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [ 9.692395] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [ 9.692586] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp [ 9.979710] brcmfmac: F1 signature read @0x18000000=0x1541a9a6 [ 9.996456] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1 [ 10.010352] usbcore: registered new interface driver brcmfmac [ 10.019763] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.raspberrypi,3-model-b.bin failed with error -2 [ 10.205152] random: crng init done [ 10.205176] random: 7 urandom warning(s) missed due to ratelimiting [ 10.348340] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1 [ 10.348525] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1 [ 10.348636] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available [ 10.349571] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Oct 22 2019 01:59:28 version 7.45.98.94 (r723000 CY) FWID 01-3b33decd [ 11.615259] 8021q: 802.1Q VLAN Support v1.8 [ 11.908863] uart-pl011 3f201000.serial: no DMA platform data [ 12.113939] Adding 102396k swap on /var/swap. Priority:-2 extents:28 across:150208k SSFS [ 12.276519] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled [ 12.714572] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 12.835871] smsc95xx 1-1.1:1.0 eth0: Link is Down [ 13.692170] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 15.923362] ICMPv6: process `dhcpcd' is using deprecated sysctl (syscall) net.ipv6.neigh.wlan0.retrans_time - use net.ipv6.neigh.wlan0.retrans_time_ms instead [ 16.399935] Bluetooth: Core ver 2.22 [ 16.400044] NET: Registered PF_BLUETOOTH protocol family [ 16.400117] Bluetooth: HCI device and connection manager initialized [ 16.400149] Bluetooth: HCI socket layer initialized [ 16.400163] Bluetooth: L2CAP socket layer initialized [ 16.400189] Bluetooth: SCO socket layer initialized [ 16.414614] Bluetooth: HCI UART driver ver 2.3 [ 16.414640] Bluetooth: HCI UART protocol H4 registered [ 16.414730] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 16.414899] Bluetooth: HCI UART protocol Broadcom registered [ 16.703966] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 16.703989] Bluetooth: BNEP filters: protocol multicast [ 16.704009] Bluetooth: BNEP socket layer initialized [ 17.281686] IPv6: wlan0: IPv6 duplicate address 2601:1c0:6701:ca40::ab27 used by b8:27:eb:2b:22:47 detected! [ 17.451191] smsc95xx 1-1.1:1.0 eth0: Link is Up - 100Mbps/Full - flow control off [ 17.451268] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 34.410132] cam-dummy-reg: disabling [ 834.468978] uvcvideo 1-1.5.2:1.1: Failed to resubmit video URB (-1). [ 1017.536053] usb usb1-port1: disabled by hub (EMI?), re-enabling... [ 1017.536102] usb 1-1: USB disconnect, device number 2 [ 1017.536123] usb 1-1.1: USB disconnect, device number 3 [ 1018.948754] uvcvideo 1-1.5.1:1.1: Failed to set UVC probe control : -19 (exp. 26). [ 1020.030982] uvcvideo 1-1.5.2:1.1: Failed to set UVC probe control : -19 (exp. 26). [ 1021.615962] smsc95xx 1-1.1:1.0 eth0: Link is Down [ 1021.728697] smsc95xx 1-1.1:1.0 eth0: Error submitting the control message: status=-19 [ 1021.728732] smsc95xx 1-1.1:1.0 eth0: Error write async cmd, sts=-19 [ 1021.728747] smsc95xx 1-1.1:1.0 eth0: failed to initiate async write to HASHH [ 1021.728761] smsc95xx 1-1.1:1.0 eth0: Error submitting the control message: status=-19 [ 1021.728789] smsc95xx 1-1.1:1.0 eth0: Error write async cmd, sts=-19 [ 1021.728804] smsc95xx 1-1.1:1.0 eth0: failed to initiate async write to HASHL [ 1021.728818] smsc95xx 1-1.1:1.0 eth0: Error submitting the control message: status=-19 [ 1021.728832] smsc95xx 1-1.1:1.0 eth0: Error write async cmd, sts=-19 [ 1021.728845] smsc95xx 1-1.1:1.0 eth0: failed to initiate async write to MAC_CR [ 1021.871520] smsc95xx 1-1.1:1.0 eth0: Error submitting the control message: status=-19 [ 1021.871562] smsc95xx 1-1.1:1.0 eth0: Error write async cmd, sts=-19 [ 1021.871577] smsc95xx 1-1.1:1.0 eth0: failed to initiate async write to HASHH [ 1021.871591] smsc95xx 1-1.1:1.0 eth0: Error submitting the control message: status=-19 [ 1021.871606] smsc95xx 1-1.1:1.0 eth0: Error write async cmd, sts=-19 [ 1021.871619] smsc95xx 1-1.1:1.0 eth0: failed to initiate async write to HASHL [ 1021.871633] smsc95xx 1-1.1:1.0 eth0: Error submitting the control message: status=-19 [ 1021.871647] smsc95xx 1-1.1:1.0 eth0: Error write async cmd, sts=-19 [ 1021.871661] smsc95xx 1-1.1:1.0 eth0: failed to initiate async write to MAC_CR [ 1021.871989] smsc95xx 1-1.1:1.0 eth0: Error submitting the control message: status=-19 [ 1021.872018] smsc95xx 1-1.1:1.0 eth0: Error write async cmd, sts=-19 [ 1021.872032] smsc95xx 1-1.1:1.0 eth0: failed to initiate async write to HASHH [ 1021.872046] smsc95xx 1-1.1:1.0 eth0: Error submitting the control message: status=-19 [ 1021.872060] smsc95xx 1-1.1:1.0 eth0: Error write async cmd, sts=-19 [ 1021.872073] smsc95xx 1-1.1:1.0 eth0: failed to initiate async write to HASHL [ 1021.872087] smsc95xx 1-1.1:1.0 eth0: Error submitting the control message: status=-19 [ 1021.872101] smsc95xx 1-1.1:1.0 eth0: Error write async cmd, sts=-19 [ 1021.872115] smsc95xx 1-1.1:1.0 eth0: failed to initiate async write to MAC_CR [ 1021.872216] smsc95xx 1-1.1:1.0 eth0: Error submitting the control message: status=-19 [ 1021.872235] smsc95xx 1-1.1:1.0 eth0: Error write async cmd, sts=-19 [ 1021.872249] smsc95xx 1-1.1:1.0 eth0: failed to initiate async write to HASHH [ 1021.872263] smsc95xx 1-1.1:1.0 eth0: Error submitting the control message: status=-19 [ 1021.872277] smsc95xx 1-1.1:1.0 eth0: Error write async cmd, sts=-19 [ 1021.872290] smsc95xx 1-1.1:1.0 eth0: failed to initiate async write to HASHL [ 1021.872304] smsc95xx 1-1.1:1.0 eth0: Error submitting the control message: status=-19 [ 1021.872318] smsc95xx 1-1.1:1.0 eth0: Error write async cmd, sts=-19 [ 1021.872332] smsc95xx 1-1.1:1.0 eth0: failed to initiate async write to MAC_CR [ 1021.924282] cp210x ttyUSB0: failed to get comm status: -19 [ 1021.924316] cp210x ttyUSB0: failed set request 0x7 status: -19 [ 1021.924716] WARN::dwc_otg_hcd_urb_dequeue:639: Timed out waiting for FSM NP transfer to complete on 1 [ 1021.924742] cp210x ttyUSB0: failed set request 0x12 status: -19 [ 1021.924752] cp210x ttyUSB0: failed set request 0x0 status: -19 [ 1022.006487] smsc95xx 1-1.1:1.0 eth0: Error submitting the control message: status=-19 [ 1022.006522] smsc95xx 1-1.1:1.0 eth0: Error write async cmd, sts=-19 [ 1022.006532] smsc95xx 1-1.1:1.0 eth0: failed to initiate async write to HASHH [ 1022.006542] smsc95xx 1-1.1:1.0 eth0: Error submitting the control message: status=-19 [ 1022.006552] smsc95xx 1-1.1:1.0 eth0: Error write async cmd, sts=-19 [ 1022.006561] smsc95xx 1-1.1:1.0 eth0: failed to initiate async write to HASHL [ 1022.006570] smsc95xx 1-1.1:1.0 eth0: Error submitting the control message: status=-19 [ 1022.006579] smsc95xx 1-1.1:1.0 eth0: Error write async cmd, sts=-19 [ 1022.006589] smsc95xx 1-1.1:1.0 eth0: failed to initiate async write to MAC_CR [ 1022.006734] smsc95xx 1-1.1:1.0 eth0: Error submitting the control message: status=-19 [ 1022.006751] smsc95xx 1-1.1:1.0 eth0: Error write async cmd, sts=-19 [ 1022.006760] smsc95xx 1-1.1:1.0 eth0: failed to initiate async write to HASHH [ 1022.006770] smsc95xx 1-1.1:1.0 eth0: Error submitting the control message: status=-19 [ 1022.006780] smsc95xx 1-1.1:1.0 eth0: Error write async cmd, sts=-19 [ 1022.006789] smsc95xx 1-1.1:1.0 eth0: failed to initiate async write to HASHL [ 1022.006798] smsc95xx 1-1.1:1.0 eth0: Error submitting the control message: status=-19 [ 1022.006807] smsc95xx 1-1.1:1.0 eth0: Error write async cmd, sts=-19 [ 1022.006816] smsc95xx 1-1.1:1.0 eth0: failed to initiate async write to MAC_CR [ 1022.046556] smsc95xx 1-1.1:1.0 eth0: Error submitting the control message: status=-19 [ 1022.046586] smsc95xx 1-1.1:1.0 eth0: Error write async cmd, sts=-19 [ 1022.046596] smsc95xx 1-1.1:1.0 eth0: failed to initiate async write to HASHH [ 1022.046605] smsc95xx 1-1.1:1.0 eth0: Error submitting the control message: status=-19 [ 1022.046615] smsc95xx 1-1.1:1.0 eth0: Error write async cmd, sts=-19 [ 1022.046624] smsc95xx 1-1.1:1.0 eth0: failed to initiate async write to HASHL [ 1022.046633] smsc95xx 1-1.1:1.0 eth0: Error submitting the control message: status=-19 [ 1022.046653] smsc95xx 1-1.1:1.0 eth0: Error write async cmd, sts=-19 [ 1022.046663] smsc95xx 1-1.1:1.0 eth0: failed to initiate async write to MAC_CR [ 1022.501444] smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet [ 1022.502285] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 1022.586883] usb 1-1.3: USB disconnect, device number 4 [ 1022.587347] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0 [ 1022.587419] cp210x 1-1.3:1.0: device disconnected [ 1022.587780] usb 1-1.5: USB disconnect, device number 5 [ 1022.587794] usb 1-1.5.1: USB disconnect, device number 6 [ 1022.748800] usb 1-1.5.2: USB disconnect, device number 7 [ 1023.066072] Indeed it is in host mode hprt0 = 00001501 [ 1023.275934] usb 1-1: new high-speed USB device number 8 using dwc_otg [ 1023.276037] Indeed it is in host mode hprt0 = 00001101 [ 1023.516129] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 [ 1023.516150] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1023.516689] hub 1-1:1.0: USB hub found [ 1023.516754] hub 1-1:1.0: 5 ports detected [ 1023.835995] usb 1-1.1: new high-speed USB device number 9 using dwc_otg [ 1023.966301] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 [ 1023.966336] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1023.969417] smsc95xx v2.0.0 [ 1024.131056] SMSC LAN8700 usb-001:009:01: attached PHY driver (mii_bus:phy_addr=usb-001:009:01, irq=POLL) [ 1024.132400] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:3e:1f:f7 [ 1024.225971] usb 1-1.3: new full-speed USB device number 10 using dwc_otg [ 1024.363794] usb 1-1.3: New USB device found, idVendor=10c4, idProduct=ea60, bcdDevice= 1.00 [ 1024.363833] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1024.363855] usb 1-1.3: Product: CP2102 USB to UART Bridge Controller [ 1024.363872] usb 1-1.3: Manufacturer: Silicon Labs [ 1024.363889] usb 1-1.3: SerialNumber: 0001 [ 1024.373716] cp210x 1-1.3:1.0: cp210x converter detected [ 1024.377522] usb 1-1.3: cp210x converter now attached to ttyUSB0 [ 1024.475998] usb 1-1.5: new high-speed USB device number 11 using dwc_otg [ 1024.607240] usb 1-1.5: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=32.98 [ 1024.607266] usb 1-1.5: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1024.607276] usb 1-1.5: Product: USB2.0 Hub [ 1024.607968] hub 1-1.5:1.0: USB hub found [ 1024.608278] hub 1-1.5:1.0: 4 ports detected [ 1024.787731] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 1024.831220] smsc95xx 1-1.1:1.0 eth0: Link is Down [ 1024.925950] usb 1-1.5.1: new high-speed USB device number 12 using dwc_otg [ 1025.229312] usb 1-1.5.1: New USB device found, idVendor=0c45, idProduct=6366, bcdDevice= 1.00 [ 1025.229340] usb 1-1.5.1: New USB device strings: Mfr=2, Product=1, SerialNumber=3 [ 1025.229350] usb 1-1.5.1: Product: USB Camera [ 1025.229359] usb 1-1.5.1: Manufacturer: USB Camera [ 1025.229368] usb 1-1.5.1: SerialNumber: SN0001 [ 1025.231690] usb 1-1.5.1: Found UVC 1.00 device USB Camera (0c45:6366) [ 1025.266918] input: USB Camera: USB Camera as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/input/input2 [ 1025.302473] usb 1-1.5.1: 3:1: cannot get freq at ep 0x84 [ 1025.536011] usb 1-1.5.2: new high-speed USB device number 13 using dwc_otg [ 1025.713895] usb 1-1.5.2: New USB device found, idVendor=0c45, idProduct=636b, bcdDevice= 1.00 [ 1025.713924] usb 1-1.5.2: New USB device strings: Mfr=2, Product=1, SerialNumber=3 [ 1025.713935] usb 1-1.5.2: Product: USB 2.0 Camera [ 1025.713943] usb 1-1.5.2: Manufacturer: Sonix Technology Co., Ltd. [ 1025.713951] usb 1-1.5.2: SerialNumber: SN0001 [ 1025.716055] usb 1-1.5.2: Found UVC 1.00 device USB 2.0 Camera (0c45:636b) [ 1025.729692] input: USB 2.0 Camera: USB Camera as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5.2/1-1.5.2:1.0/input/input3 [ 1025.736635] usb 1-1.5.2: 3:1: cannot get freq at ep 0x84 [ 1027.057182] smsc95xx 1-1.1:1.0 eth0: Link is Up - 100Mbps/Full - flow control off [ 1027.057252] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready