2020-02-10 21:11:57,469 Settings loaded.
2020-02-10 21:11:57,485 Setting octolapse camera address to http://3dprinter:8081.
2020-02-10 21:11:57,498 Setting octolapse camera snapshot template to {camera_address}?.
2020-02-10 21:11:57,550 Octolapse - loaded and active.
2020-02-10 21:11:59,876 Octolapse - is loading template configurations.
2020-02-10 21:14:19,861 Printer event received:ClientOpened.
2020-02-10 21:14:21,444 Printer event received:Connecting.
2020-02-10 21:14:21,518 Printer event received:PrinterStateChanged.
2020-02-10 21:14:21,549 Printer event received:PrinterStateChanged.
2020-02-10 21:14:21,555 Printer event received:PrinterStateChanged.
2020-02-10 21:14:22,870 Printer event received:PrinterStateChanged.
2020-02-10 21:14:22,889 Printer event received:Connected.
2020-02-10 21:14:29,622 Printer event received:FirmwareData.
2020-02-10 21:15:34,666 Printer event received:FileSelected.
2020-02-10 21:15:34,702 Printer event received:PrinterStateChanged.
2020-02-10 21:15:34,711 Printer event received:PrintStarted.
2020-02-10 21:15:34,711 Print Start Detected.  Command: M110 N0, Tags:set(['trigger:comm.start_print', 'source:job', 'trigger:comm.reset_line_numbers'])
2020-02-10 21:15:34,712 Print start detected, attempting to start timelapse.
2020-02-10 21:22:05,193 Traceback (most recent call last):
  File "/home/pi/OctoPrint/venv/local/lib/python2.7/site-packages/octoprint_octolapse/__init__.py", line 962, in on_print_start
    camera.test_web_camera(current_camera)
  File "/home/pi/OctoPrint/venv/local/lib/python2.7/site-packages/octoprint_octolapse/camera.py", line 54, in test_web_camera
    url, verify=not camera_profile.ignore_ssl_error, timeout=float(timeout_seconds))
  File "/home/pi/OctoPrint/venv/local/lib/python2.7/site-packages/requests/api.py", line 75, in get
    return request('get', url, params=params, **kwargs)
  File "/home/pi/OctoPrint/venv/local/lib/python2.7/site-packages/requests/api.py", line 60, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/pi/OctoPrint/venv/local/lib/python2.7/site-packages/requests/sessions.py", line 533, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/pi/OctoPrint/venv/local/lib/python2.7/site-packages/requests/sessions.py", line 686, in send
    r.content
  File "/home/pi/OctoPrint/venv/local/lib/python2.7/site-packages/requests/models.py", line 828, in content
    self._content = b''.join(self.iter_content(CONTENT_CHUNK_SIZE)) or b''
  File "/home/pi/OctoPrint/venv/local/lib/python2.7/site-packages/requests/models.py", line 753, in generate
    raise ChunkedEncodingError(e)
ChunkedEncodingError: ("Connection broken: error(104, 'Connection reset by peer')", error(104, 'Connection reset by peer'))

2020-02-10 21:22:05,206 Printer event received:PrintCancelling.
2020-02-10 21:22:05,207 Print cancelling.
2020-02-10 21:22:05,215 Printer event received:PrinterStateChanged.
2020-02-10 21:22:05,234 Printer event received:PrintCancelled.
2020-02-10 21:22:05,235 Print cancelled.
2020-02-10 21:22:05,272 Unable to start the timelapse.  Cancelling print.  Error:  An unknown exception occurred while testing the 'Logitech_HD720P' camera profile.  Check plugin_octolapse.log for details.
2020-02-10 21:22:05,288 Traceback (most recent call last):
  File "/home/pi/OctoPrint/venv/local/lib/python2.7/site-packages/octoprint_octolapse/__init__.py", line 1318, in on_gcode_queuing
    return self.Timelapse.on_gcode_queuing(cmd, cmd_type, gcode, kwargs["tags"])
  File "/home/pi/OctoPrint/venv/local/lib/python2.7/site-packages/octoprint_octolapse/timelapse.py", line 565, in on_gcode_queuing
    self.detect_timelapse_start(command_string, tags)
  File "/home/pi/OctoPrint/venv/local/lib/python2.7/site-packages/octoprint_octolapse/timelapse.py", line 718, in detect_timelapse_start
    self.on_print_start(tags)
  File "/home/pi/OctoPrint/venv/local/lib/python2.7/site-packages/octoprint_octolapse/timelapse.py", line 555, in on_print_start
    self.OnPrintStartCallback(tags)
  File "/home/pi/OctoPrint/venv/local/lib/python2.7/site-packages/octoprint_octolapse/__init__.py", line 972, in on_print_start
    raise e
ChunkedEncodingError: ("Connection broken: error(104, 'Connection reset by peer')", error(104, 'Connection reset by peer'))

2020-02-10 21:22:05,321 Printer event received:MetadataStatisticsUpdated.
2020-02-10 21:22:05,324 Printer event received:PrintFailed.
2020-02-10 21:22:05,329 Print failed.
2020-02-10 21:22:05,331 Printer event received:PrinterStateChanged.
2020-02-10 21:22:05,548 Printer event received:PrinterStateChanged.
2020-02-10 21:22:05,844 Printer event received:Shutdown.
2020-02-10 21:22:40,915 Settings loaded.
2020-02-10 21:22:40,921 Setting octolapse camera address to http://3dprinter:8081.
2020-02-10 21:22:40,922 Setting octolapse camera snapshot template to {camera_address}?.
2020-02-10 21:22:40,924 Octolapse - loaded and active.
2020-02-10 21:22:49,771 Octolapse - is loading template configurations.
2020-02-10 21:23:36,394 Printer event received:SettingsUpdated.
2020-02-10 21:23:36,720 Printer event received:ClientOpened.
2020-02-10 21:37:29,940 Printer event received:ConnectivityChanged.
2020-02-10 22:01:53,944 Printer event received:ClientClosed.
2020-02-10 23:32:23,699 Printer event received:ClientOpened.
2020-02-10 23:51:48,506 Printer event received:ClientClosed.
2020-02-11 08:46:12,892 Printer event received:ClientOpened.
2020-02-11 09:34:48,355 Printer event received:ClientClosed.
2020-02-11 09:44:57,045 Printer event received:ClientOpened.
2020-02-11 12:43:59,394 Printer event received:ClientClosed.
2020-02-11 19:59:22,229 Printer event received:ClientOpened.
2020-02-11 20:09:55,031 Printer event received:ClientClosed.
2020-02-11 20:09:56,983 Printer event received:ClientOpened.
2020-02-11 20:12:56,571 Printer event received:Connecting.
2020-02-11 20:12:56,664 Printer event received:PrinterStateChanged.
2020-02-11 20:12:56,772 Printer event received:PrinterStateChanged.
2020-02-11 20:12:56,778 Printer event received:PrinterStateChanged.
2020-02-11 20:12:58,064 Printer event received:PrinterStateChanged.
2020-02-11 20:12:58,085 Printer event received:Connected.
2020-02-11 20:13:04,817 Printer event received:FirmwareData.
2020-02-11 20:57:11,198 Saving Settings.
2020-02-11 20:57:11,264 Settings saved.
2020-02-11 21:07:10,742 ("Connection broken: error(104, 'Connection reset by peer')", error(104, 'Connection reset by peer'))
2020-02-11 21:07:10,933 HTTPConnectionPool(host='3dprinter', port=8081): Max retries exceeded with url: / (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x6af5fd10>: Failed to establish a new connection: [Errno 111] Connection refused',))
2020-02-11 21:07:10,959 HTTPConnectionPool(host='3dprinter', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x6af5f770>: Failed to establish a new connection: [Errno 111] Connection refused',))
2020-02-11 21:07:10,985 HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x6af5f250>: Failed to establish a new connection: [Errno 111] Connection refused',))
2020-02-11 21:07:11,011 HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x6af5ba50>: Failed to establish a new connection: [Errno 111] Connection refused',))
2020-02-11 21:07:11,042 HTTPConnectionPool(host='3dprinter', port=8081): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x6af5b4b0>: Failed to establish a new connection: [Errno 111] Connection refused',))
2020-02-11 21:07:11,945 Printer event received:Shutdown.
2020-02-11 21:08:02,497 Settings loaded.
2020-02-11 21:08:02,554 Setting octolapse camera address to http://3dprinter:8081.
2020-02-11 21:08:02,556 Setting octolapse camera snapshot template to {camera_address}?.
2020-02-11 21:08:02,612 Octolapse - loaded and active.
2020-02-11 21:08:03,681 Printer event received:ClientOpened.
2020-02-11 21:08:05,967 Octolapse - is loading template configurations.
2020-02-11 21:08:05,967 Octolapse - is loading template configurations.
2020-02-11 21:08:07,228 Printer event received:ClientClosed.
2020-02-11 21:08:11,761 Printer event received:ClientOpened.
2020-02-11 21:08:13,178 Printer event received:Connecting.
2020-02-11 21:08:13,350 Printer event received:PrinterStateChanged.
2020-02-11 21:08:13,782 Printer event received:PrinterStateChanged.
2020-02-11 21:08:13,791 Printer event received:PrinterStateChanged.
2020-02-11 21:08:15,170 Printer event received:PrinterStateChanged.
2020-02-11 21:08:15,176 Printer event received:Connected.
2020-02-11 21:08:21,837 Printer event received:FirmwareData.
2020-02-11 21:09:16,969 Printer event received:FileSelected.
2020-02-11 21:09:16,990 Printer event received:PrinterStateChanged.
2020-02-11 21:09:16,995 Printer event received:PrintStarted.
2020-02-11 21:09:16,999 Print Start Detected.  Command: M110 N0, Tags:set(['trigger:comm.start_print', 'source:job', 'trigger:comm.reset_line_numbers'])
2020-02-11 21:09:17,001 Print start detected, attempting to start timelapse.
2020-02-11 21:10:14,397 Traceback (most recent call last):
  File "/home/pi/OctoPrint/venv/local/lib/python2.7/site-packages/octoprint_octolapse/__init__.py", line 962, in on_print_start
    camera.test_web_camera(current_camera)
  File "/home/pi/OctoPrint/venv/local/lib/python2.7/site-packages/octoprint_octolapse/camera.py", line 54, in test_web_camera
    url, verify=not camera_profile.ignore_ssl_error, timeout=float(timeout_seconds))
  File "/home/pi/OctoPrint/venv/local/lib/python2.7/site-packages/requests/api.py", line 75, in get
    return request('get', url, params=params, **kwargs)
  File "/home/pi/OctoPrint/venv/local/lib/python2.7/site-packages/requests/api.py", line 60, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/pi/OctoPrint/venv/local/lib/python2.7/site-packages/requests/sessions.py", line 533, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/pi/OctoPrint/venv/local/lib/python2.7/site-packages/requests/sessions.py", line 686, in send
    r.content
  File "/home/pi/OctoPrint/venv/local/lib/python2.7/site-packages/requests/models.py", line 828, in content
    self._content = b''.join(self.iter_content(CONTENT_CHUNK_SIZE)) or b''
  File "/home/pi/OctoPrint/venv/local/lib/python2.7/site-packages/requests/models.py", line 753, in generate
    raise ChunkedEncodingError(e)
ChunkedEncodingError: ("Connection broken: error(104, 'Connection reset by peer')", error(104, 'Connection reset by peer'))

2020-02-11 21:10:14,407 Printer event received:PrintCancelling.
2020-02-11 21:10:14,412 Print cancelling.
2020-02-11 21:10:14,418 Printer event received:PrinterStateChanged.
2020-02-11 21:10:14,430 Printer event received:PrintCancelled.
2020-02-11 21:10:14,438 Print cancelled.
2020-02-11 21:10:14,467 Unable to start the timelapse.  Cancelling print.  Error:  An unknown exception occurred while testing the 'Logitech_HD720P' camera profile.  Check plugin_octolapse.log for details.
2020-02-11 21:10:14,484 Traceback (most recent call last):
  File "/home/pi/OctoPrint/venv/local/lib/python2.7/site-packages/octoprint_octolapse/__init__.py", line 1318, in on_gcode_queuing
    return self.Timelapse.on_gcode_queuing(cmd, cmd_type, gcode, kwargs["tags"])
  File "/home/pi/OctoPrint/venv/local/lib/python2.7/site-packages/octoprint_octolapse/timelapse.py", line 565, in on_gcode_queuing
    self.detect_timelapse_start(command_string, tags)
  File "/home/pi/OctoPrint/venv/local/lib/python2.7/site-packages/octoprint_octolapse/timelapse.py", line 718, in detect_timelapse_start
    self.on_print_start(tags)
  File "/home/pi/OctoPrint/venv/local/lib/python2.7/site-packages/octoprint_octolapse/timelapse.py", line 555, in on_print_start
    self.OnPrintStartCallback(tags)
  File "/home/pi/OctoPrint/venv/local/lib/python2.7/site-packages/octoprint_octolapse/__init__.py", line 972, in on_print_start
    raise e
ChunkedEncodingError: ("Connection broken: error(104, 'Connection reset by peer')", error(104, 'Connection reset by peer'))

2020-02-11 21:10:14,512 Printer event received:MetadataStatisticsUpdated.
2020-02-11 21:10:14,523 Printer event received:PrintFailed.
2020-02-11 21:10:14,524 Print failed.
2020-02-11 21:10:14,525 Printer event received:PrinterStateChanged.
2020-02-11 21:10:14,743 Printer event received:PrinterStateChanged.
2020-02-11 21:10:14,846 Printer event received:FileSelected.
2020-02-11 21:10:14,862 Printer event received:PrinterStateChanged.
2020-02-11 21:10:14,872 Printer event received:PrintStarted.
2020-02-11 21:10:14,873 Print Start Detected.  Command: M110 N0, Tags:set(['trigger:comm.start_print', 'source:job', 'trigger:comm.reset_line_numbers'])
2020-02-11 21:10:14,874 Print start detected, attempting to start timelapse.
2020-02-11 21:10:14,894 Traceback (most recent call last):
  File "/home/pi/OctoPrint/venv/local/lib/python2.7/site-packages/octoprint_octolapse/__init__.py", line 962, in on_print_start
    camera.test_web_camera(current_camera)
  File "/home/pi/OctoPrint/venv/local/lib/python2.7/site-packages/octoprint_octolapse/camera.py", line 54, in test_web_camera
    url, verify=not camera_profile.ignore_ssl_error, timeout=float(timeout_seconds))
  File "/home/pi/OctoPrint/venv/local/lib/python2.7/site-packages/requests/api.py", line 75, in get
    return request('get', url, params=params, **kwargs)
  File "/home/pi/OctoPrint/venv/local/lib/python2.7/site-packages/requests/api.py", line 60, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/pi/OctoPrint/venv/local/lib/python2.7/site-packages/requests/sessions.py", line 533, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/pi/OctoPrint/venv/local/lib/python2.7/site-packages/requests/sessions.py", line 646, in send
    r = adapter.send(request, **kwargs)
  File "/home/pi/OctoPrint/venv/local/lib/python2.7/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
ConnectionError: HTTPConnectionPool(host='3dprinter', port=8081): Max retries exceeded with url: / (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x698f1ef0>: Failed to establish a new connection: [Errno 111] Connection refused',))

2020-02-11 21:10:14,899 Printer event received:PrintCancelling.
2020-02-11 21:10:14,906 Print cancelling.
2020-02-11 21:10:14,907 Printer event received:PrinterStateChanged.
2020-02-11 21:10:14,925 Printer event received:PrintCancelled.
2020-02-11 21:10:14,928 Print cancelled.
2020-02-11 21:10:14,931 Unable to start the timelapse.  Cancelling print.  Error:  An unknown exception occurred while testing the 'Logitech_HD720P' camera profile.  Check plugin_octolapse.log for details.
2020-02-11 21:10:14,937 Traceback (most recent call last):
  File "/home/pi/OctoPrint/venv/local/lib/python2.7/site-packages/octoprint_octolapse/__init__.py", line 1318, in on_gcode_queuing
    return self.Timelapse.on_gcode_queuing(cmd, cmd_type, gcode, kwargs["tags"])
  File "/home/pi/OctoPrint/venv/local/lib/python2.7/site-packages/octoprint_octolapse/timelapse.py", line 565, in on_gcode_queuing
    self.detect_timelapse_start(command_string, tags)
  File "/home/pi/OctoPrint/venv/local/lib/python2.7/site-packages/octoprint_octolapse/timelapse.py", line 718, in detect_timelapse_start
    self.on_print_start(tags)
  File "/home/pi/OctoPrint/venv/local/lib/python2.7/site-packages/octoprint_octolapse/timelapse.py", line 555, in on_print_start
    self.OnPrintStartCallback(tags)
  File "/home/pi/OctoPrint/venv/local/lib/python2.7/site-packages/octoprint_octolapse/__init__.py", line 972, in on_print_start
    raise e
ConnectionError: HTTPConnectionPool(host='3dprinter', port=8081): Max retries exceeded with url: / (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x698f1ef0>: Failed to establish a new connection: [Errno 111] Connection refused',))

2020-02-11 21:10:14,948 Printer event received:PrinterStateChanged.
2020-02-11 21:10:14,983 Printer event received:MetadataStatisticsUpdated.
2020-02-11 21:10:14,985 Printer event received:PrintFailed.
2020-02-11 21:10:14,986 Print failed.
2020-02-11 21:10:14,996 Printer event received:PrinterStateChanged.
2020-02-11 21:10:15,077 Printer event received:Shutdown.
2020-02-11 21:11:04,891 Settings loaded.
2020-02-11 21:11:04,900 Setting octolapse camera address to http://3dprinter:8081.
2020-02-11 21:11:05,026 Setting octolapse camera snapshot template to {camera_address}?.
2020-02-11 21:11:05,033 Octolapse - loaded and active.
2020-02-11 21:11:06,186 Printer event received:ClientOpened.
2020-02-11 21:11:06,984 Printer event received:ClientClosed.
2020-02-11 21:11:07,170 Printer event received:ClientOpened.
2020-02-11 21:11:07,764 Octolapse - is loading template configurations.
2020-02-11 21:11:08,994 Printer event received:ClientClosed.
2020-02-11 21:11:14,212 Printer event received:ClientOpened.
2020-02-11 21:11:24,350 Printer event received:plugin_pluginmanager_disable_plugin.
2020-02-11 21:11:42,973 Printer event received:Shutdown.
2020-02-11 21:17:50,129 Settings loaded.
2020-02-11 21:17:50,135 Setting octolapse camera address to http://3dprinter:8081.
2020-02-11 21:17:50,136 Setting octolapse camera snapshot template to {camera_address}?.
2020-02-11 21:17:50,139 Octolapse - loaded and active.
2020-02-11 21:18:04,291 Printer event received:ClientOpened.
2020-02-11 21:18:04,681 Octolapse - is loading template configurations.
2020-02-11 21:18:05,128 Printer event received:ClientClosed.
2020-02-11 21:18:05,330 Printer event received:ClientOpened.
2020-02-11 21:18:48,319 Printer event received:ClientClosed.
2020-02-11 21:18:52,408 Printer event received:ClientOpened.
2020-02-11 21:18:59,135 Printer event received:Connecting.
2020-02-11 21:18:59,212 Printer event received:PrinterStateChanged.
2020-02-11 21:18:59,251 Printer event received:PrinterStateChanged.
2020-02-11 21:18:59,256 Printer event received:PrinterStateChanged.
2020-02-11 21:19:00,550 Printer event received:PrinterStateChanged.
2020-02-11 21:19:00,554 Printer event received:Connected.
2020-02-11 21:19:07,318 Printer event received:FirmwareData.
2020-02-11 21:21:29,547 Printer event received:FileSelected.
2020-02-11 21:21:29,583 Printer event received:PrinterStateChanged.
2020-02-11 21:21:29,591 Printer event received:PrintStarted.
2020-02-11 21:21:29,594 Print Start Detected.  Command: M110 N0, Tags:set(['trigger:comm.start_print', 'source:job', 'trigger:comm.reset_line_numbers'])
2020-02-11 21:21:29,595 Print start detected, attempting to start timelapse.
2020-02-11 21:26:14,599 Traceback (most recent call last):
  File "/home/pi/OctoPrint/venv/local/lib/python2.7/site-packages/octoprint_octolapse/__init__.py", line 962, in on_print_start
    camera.test_web_camera(current_camera)
  File "/home/pi/OctoPrint/venv/local/lib/python2.7/site-packages/octoprint_octolapse/camera.py", line 54, in test_web_camera
    url, verify=not camera_profile.ignore_ssl_error, timeout=float(timeout_seconds))
  File "/home/pi/OctoPrint/venv/local/lib/python2.7/site-packages/requests/api.py", line 75, in get
    return request('get', url, params=params, **kwargs)
  File "/home/pi/OctoPrint/venv/local/lib/python2.7/site-packages/requests/api.py", line 60, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/pi/OctoPrint/venv/local/lib/python2.7/site-packages/requests/sessions.py", line 533, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/pi/OctoPrint/venv/local/lib/python2.7/site-packages/requests/sessions.py", line 686, in send
    r.content
  File "/home/pi/OctoPrint/venv/local/lib/python2.7/site-packages/requests/models.py", line 828, in content
    self._content = b''.join(self.iter_content(CONTENT_CHUNK_SIZE)) or b''
  File "/home/pi/OctoPrint/venv/local/lib/python2.7/site-packages/requests/models.py", line 753, in generate
    raise ChunkedEncodingError(e)
ChunkedEncodingError: ("Connection broken: error(104, 'Connection reset by peer')", error(104, 'Connection reset by peer'))

2020-02-11 21:26:14,617 Printer event received:PrintCancelling.
2020-02-11 21:26:14,623 Print cancelling.
2020-02-11 21:26:14,624 Printer event received:PrinterStateChanged.
2020-02-11 21:26:14,640 Printer event received:PrintCancelled.
2020-02-11 21:26:14,644 Print cancelled.
2020-02-11 21:26:14,673 Unable to start the timelapse.  Cancelling print.  Error:  An unknown exception occurred while testing the 'Logitech_HD720P' camera profile.  Check plugin_octolapse.log for details.
2020-02-11 21:26:14,686 Traceback (most recent call last):
  File "/home/pi/OctoPrint/venv/local/lib/python2.7/site-packages/octoprint_octolapse/__init__.py", line 1318, in on_gcode_queuing
    return self.Timelapse.on_gcode_queuing(cmd, cmd_type, gcode, kwargs["tags"])
  File "/home/pi/OctoPrint/venv/local/lib/python2.7/site-packages/octoprint_octolapse/timelapse.py", line 565, in on_gcode_queuing
    self.detect_timelapse_start(command_string, tags)
  File "/home/pi/OctoPrint/venv/local/lib/python2.7/site-packages/octoprint_octolapse/timelapse.py", line 718, in detect_timelapse_start
    self.on_print_start(tags)
  File "/home/pi/OctoPrint/venv/local/lib/python2.7/site-packages/octoprint_octolapse/timelapse.py", line 555, in on_print_start
    self.OnPrintStartCallback(tags)
  File "/home/pi/OctoPrint/venv/local/lib/python2.7/site-packages/octoprint_octolapse/__init__.py", line 972, in on_print_start
    raise e
ChunkedEncodingError: ("Connection broken: error(104, 'Connection reset by peer')", error(104, 'Connection reset by peer'))

2020-02-11 21:26:14,718 Printer event received:MetadataStatisticsUpdated.
2020-02-11 21:26:14,722 Printer event received:PrintFailed.
2020-02-11 21:26:14,723 Print failed.
2020-02-11 21:26:14,723 Printer event received:PrinterStateChanged.
2020-02-11 21:26:14,800 Printer event received:PrinterStateChanged.
2020-02-11 21:26:14,945 Printer event received:FileSelected.
2020-02-11 21:26:14,958 Printer event received:PrinterStateChanged.
2020-02-11 21:26:14,963 Print Start Detected.  Command: M110 N0, Tags:set(['trigger:comm.start_print', 'source:job', 'trigger:comm.reset_line_numbers'])
2020-02-11 21:26:14,966 Print start detected, attempting to start timelapse.
2020-02-11 21:26:14,969 Printer event received:PrintStarted.
2020-02-11 21:26:14,984 Traceback (most recent call last):
  File "/home/pi/OctoPrint/venv/local/lib/python2.7/site-packages/octoprint_octolapse/__init__.py", line 962, in on_print_start
    camera.test_web_camera(current_camera)
  File "/home/pi/OctoPrint/venv/local/lib/python2.7/site-packages/octoprint_octolapse/camera.py", line 54, in test_web_camera
    url, verify=not camera_profile.ignore_ssl_error, timeout=float(timeout_seconds))
  File "/home/pi/OctoPrint/venv/local/lib/python2.7/site-packages/requests/api.py", line 75, in get
    return request('get', url, params=params, **kwargs)
  File "/home/pi/OctoPrint/venv/local/lib/python2.7/site-packages/requests/api.py", line 60, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/pi/OctoPrint/venv/local/lib/python2.7/site-packages/requests/sessions.py", line 533, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/pi/OctoPrint/venv/local/lib/python2.7/site-packages/requests/sessions.py", line 646, in send
    r = adapter.send(request, **kwargs)
  File "/home/pi/OctoPrint/venv/local/lib/python2.7/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
ConnectionError: HTTPConnectionPool(host='3dprinter', port=8081): Max retries exceeded with url: / (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x6c6c02f0>: Failed to establish a new connection: [Errno 111] Connection refused',))

2020-02-11 21:26:14,998 Printer event received:PrintCancelling.
2020-02-11 21:26:15,001 Print cancelling.
2020-02-11 21:26:15,004 Printer event received:PrinterStateChanged.
2020-02-11 21:26:15,016 Printer event received:PrintCancelled.
2020-02-11 21:26:15,017 Print cancelled.
2020-02-11 21:26:15,025 Unable to start the timelapse.  Cancelling print.  Error:  An unknown exception occurred while testing the 'Logitech_HD720P' camera profile.  Check plugin_octolapse.log for details.
2020-02-11 21:26:15,033 Traceback (most recent call last):
  File "/home/pi/OctoPrint/venv/local/lib/python2.7/site-packages/octoprint_octolapse/__init__.py", line 1318, in on_gcode_queuing
    return self.Timelapse.on_gcode_queuing(cmd, cmd_type, gcode, kwargs["tags"])
  File "/home/pi/OctoPrint/venv/local/lib/python2.7/site-packages/octoprint_octolapse/timelapse.py", line 565, in on_gcode_queuing
    self.detect_timelapse_start(command_string, tags)
  File "/home/pi/OctoPrint/venv/local/lib/python2.7/site-packages/octoprint_octolapse/timelapse.py", line 718, in detect_timelapse_start
    self.on_print_start(tags)
  File "/home/pi/OctoPrint/venv/local/lib/python2.7/site-packages/octoprint_octolapse/timelapse.py", line 555, in on_print_start
    self.OnPrintStartCallback(tags)
  File "/home/pi/OctoPrint/venv/local/lib/python2.7/site-packages/octoprint_octolapse/__init__.py", line 972, in on_print_start
    raise e
ConnectionError: HTTPConnectionPool(host='3dprinter', port=8081): Max retries exceeded with url: / (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x6c6c02f0>: Failed to establish a new connection: [Errno 111] Connection refused',))

2020-02-11 21:26:15,041 Printer event received:PrinterStateChanged.
2020-02-11 21:26:15,087 Printer event received:MetadataStatisticsUpdated.
2020-02-11 21:26:15,090 Printer event received:PrintFailed.
2020-02-11 21:26:15,092 Print failed.
2020-02-11 21:26:15,098 Printer event received:PrinterStateChanged.
2020-02-11 21:26:15,891 Printer event received:Shutdown.
2020-02-11 21:27:03,547 Settings loaded.
2020-02-11 21:27:03,628 Setting octolapse camera address to http://3dprinter:8081.
2020-02-11 21:27:03,629 Setting octolapse camera snapshot template to {camera_address}?.
2020-02-11 21:27:03,632 Octolapse - loaded and active.
2020-02-11 21:27:05,940 Octolapse - is loading template configurations.
2020-02-11 22:40:10,923 Printer event received:ClientOpened.
2020-02-12 06:40:38,294 Printer event received:ClientClosed.
2020-02-12 08:31:19,901 Printer event received:ClientOpened.
2020-02-12 08:53:22,687 Printer event received:Connecting.
2020-02-12 08:53:22,788 Printer event received:PrinterStateChanged.
2020-02-12 08:53:22,800 Printer event received:PrinterStateChanged.
2020-02-12 08:53:31,249 Printer event received:PrinterStateChanged.
2020-02-12 08:53:31,262 Printer event received:Connected.
2020-02-12 08:53:31,327 Printer event received:FirmwareData.