2022-03-15 01:13:39,521 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 01:13:39,525 - octoprint.server - INFO - --- Log roll over detected ---------------------------------------------------
2022-03-15 01:13:39,525 - octoprint.server - INFO - OctoPrint 1.7.3
2022-03-15 01:13:39,530 - octoprint.plugin.core - INFO - 29 plugin(s) registered with the system:
|  Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_notification
|  Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_prompt
|  Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/announcements
|  Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/tracking
|  Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/appkeys
|  Arc-Welder (1.0.0+u.bb71e8f) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_arc_welder
|  Backup & Restore (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/backup
|  Core Wizard (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/corewizard
|  Dashboard (1.19.8) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_dashboard
|  Discovery (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/discovery
|  DisplayLayerProgress Plugin (1.28.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_DisplayLayerProgress
|  Error Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/errortracking
|  Event Manager (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/eventmanager
|  File Check (2021.2.23) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_file_check
|  Firmware Check (2021.10.11) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_firmware_check
|  GCode Viewer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/gcodeviewer
|  HeaterTimeout (0.0.4) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_HeaterTimeout
|  Logging (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/logging
|  Navbar Temperature Plugin (0.14) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_navbartemp
|  Octolapse (0.4.1) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_octolapse
|  Pi Support Plugin (2022.3.1) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_pi_support
|  Plugin Manager (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/pluginmanager
|  Preheat Button (0.8.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_preheat
|  PrintTimeGenius Plugin (2.2.8) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_PrintTimeGenius
|  Resource Monitor (0.3.6) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_resource_monitor
|  Software Update (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/softwareupdate
|  UI Customizer (0.1.8.9) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_uicustomizer
|  Virtual Printer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/virtual_printer
|  WiFi Status (1.7.2) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_wifistatus
Prefix legend: ! = disabled, # = blacklisted, * = incompatible
2022-03-15 01:13:39,541 - octoprint.environment - INFO - Detected environment is Python 3.7.3 under Linux (linux). Details:
|  hardware:
|    cores: 4
|    freq: 1500.0
|    ram: 3971153920
|  os:
|    bits: 32
|    id: linux
|    platform: linux
|  plugins:
|    pi_support:
|      model: Raspberry Pi 4 Model B Rev 1.1
|      octopi_version: 0.18.0
|      octopiuptodate_build: 0.18.0-1.7.3-20220120112925
|      throttle_state: '0x0'
|  python:
|    pip: 20.3.3
|    version: 3.7.3
|    virtualenv: /home/pi/oprint
2022-03-15 01:13:39,542 - octoprint.server - INFO - ------------------------------------------------------------------------------
2022-03-15 01:28:39,522 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 01:43:39,524 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 01:58:39,526 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 02:13:39,527 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 02:28:39,529 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 02:43:39,531 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 02:58:39,532 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 03:13:39,533 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 03:28:39,535 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 03:43:39,537 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 03:58:39,538 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 04:13:39,540 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 04:28:39,542 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 04:43:39,543 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 04:58:39,545 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 05:13:39,546 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 05:28:39,548 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 05:43:39,550 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 05:58:39,551 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 06:13:39,553 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 06:28:39,554 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 06:43:39,556 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 06:58:39,558 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 07:13:39,559 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 07:28:39,561 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 07:43:39,562 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 07:58:39,564 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 08:13:39,565 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 08:28:39,567 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 08:43:39,569 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 08:58:39,570 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 09:13:39,572 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 09:28:39,574 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 09:43:39,575 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 09:58:39,577 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 10:13:39,579 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 10:28:39,581 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 10:43:39,583 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 10:45:49,936 - octoprint.server.util.flask - INFO - Passively logging in user tk from ::ffff:192.168.0.100
2022-03-15 10:45:49,938 - octoprint.access.users - INFO - Logged in user: tk
2022-03-15 10:45:50,948 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.0.100
2022-03-15 10:45:51,057 - octoprint.server.util.flask - INFO - Passively logging in user tk from ::ffff:192.168.0.100
2022-03-15 10:45:51,057 - octoprint.access.users - INFO - Logged in user: tk
2022-03-15 10:45:51,237 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json
2022-03-15 10:45:52,513 - octoprint.server.util.sockjs - INFO - User tk logged in on the socket from client ::ffff:192.168.0.100
2022-03-15 10:45:52,978 - octoprint.plugins.announcements - INFO - Loaded channel _important from https://octoprint.org/feeds/important.xml in 0.17s
2022-03-15 10:45:53,202 - octoprint.plugins.announcements - INFO - Loaded channel _releases from https://octoprint.org/feeds/releases.xml in 0.18s
2022-03-15 10:45:53,399 - octoprint.plugins.announcements - INFO - Loaded channel _blog from https://octoprint.org/feeds/octoblog.xml in 0.17s
2022-03-15 10:45:53,607 - octoprint.plugins.announcements - INFO - Loaded channel _plugins from https://plugins.octoprint.org/feed.xml in 0.17s
2022-03-15 10:45:53,842 - octoprint.plugins.announcements - INFO - Loaded channel _octopi from https://octoprint.org/feeds/octopi.xml in 0.17s
2022-03-15 10:45:54,073 - octoprint.plugins.pluginmanager - INFO - Loaded plugin notices data from https://plugins.octoprint.org/notices.json
2022-03-15 10:45:54,880 - octoprint.plugins.softwareupdate - ERROR - Could not check arc_welder for updates
Traceback (most recent call last):
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/softwareupdate/__init__.py", line 1785, in _get_current_version
    target, check, online=online, credentials=credentials
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/softwareupdate/version_checks/github_release.py", line 305, in get_latest
    target
octoprint.plugins.softwareupdate.exceptions.ConfigurationInvalid: Update configuration for arc_welder of type github_release needs all of user, repo and current set and not None
2022-03-15 10:45:55,914 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk
2022-03-15 10:58:39,584 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 11:13:39,586 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 11:28:39,587 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 11:43:39,589 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 11:58:39,591 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 12:13:39,592 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 12:28:39,594 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 12:43:39,595 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 12:58:39,597 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 13:13:39,598 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 13:28:39,600 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 13:43:39,601 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 13:58:39,603 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 14:13:39,604 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 14:28:39,606 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 14:43:39,607 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 14:56:41,320 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.0.100
2022-03-15 14:58:39,609 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 15:13:39,611 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 15:28:39,612 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 15:43:39,614 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 15:58:39,616 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 16:13:39,617 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 16:28:39,619 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 16:35:03,632 - zeroconf - WARNING - Error with socket 5 (('127.0.0.1', 5353))): [Errno 22] Invalid argument
Traceback (most recent call last):
  File "/usr/lib/python3.7/asyncio/selector_events.py", line 987, in sendto
    self._sock.sendto(data, addr)
OSError: [Errno 22] Invalid argument
2022-03-15 16:43:39,621 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 16:58:39,623 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 17:13:39,624 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 17:28:39,626 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 17:43:39,628 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 17:58:39,629 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 18:13:39,631 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 18:28:39,633 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 18:43:39,634 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 18:58:39,636 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 19:13:39,637 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 19:28:39,639 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 19:43:39,641 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 19:58:39,642 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 20:13:39,644 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 20:28:39,645 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 20:43:39,647 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 20:58:39,648 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 21:13:39,650 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 21:28:39,652 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 21:43:39,653 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 21:58:39,655 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 22:13:39,656 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 22:28:39,658 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 22:32:27,024 - octoprint.server.util.flask - INFO - Passively logging in user tk from ::ffff:192.168.0.100
2022-03-15 22:32:27,025 - octoprint.access.users - INFO - Logged in user: tk
2022-03-15 22:32:28,158 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.0.100
2022-03-15 22:32:28,393 - octoprint.server.util.flask - INFO - Passively logging in user tk from ::ffff:192.168.0.100
2022-03-15 22:32:28,393 - octoprint.access.users - INFO - Logged in user: tk
2022-03-15 22:32:28,603 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json
2022-03-15 22:32:29,936 - octoprint.server.util.sockjs - INFO - User tk logged in on the socket from client ::ffff:192.168.0.100
2022-03-15 22:32:30,480 - octoprint.plugins.pluginmanager - INFO - Loaded plugin notices data from https://plugins.octoprint.org/notices.json
2022-03-15 22:34:01,414 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from https://plugins.octoprint.org/plugins.json
2022-03-15 22:41:57,561 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json
2022-03-15 22:41:57,921 - octoprint.plugins.softwareupdate - ERROR - Could not check arc_welder for updates
Traceback (most recent call last):
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/softwareupdate/__init__.py", line 1785, in _get_current_version
    target, check, online=online, credentials=credentials
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/softwareupdate/version_checks/github_release.py", line 305, in get_latest
    target
octoprint.plugins.softwareupdate.exceptions.ConfigurationInvalid: Update configuration for arc_welder of type github_release needs all of user, repo and current set and not None
2022-03-15 22:41:59,041 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk
2022-03-15 22:42:47,113 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk
2022-03-15 22:42:59,809 - octoprint.plugins.softwareupdate - INFO - Starting update of octoprint to 1.8.0rc1...
2022-03-15 22:43:26,255 - octoprint.plugins.softwareupdate - INFO - Update of octoprint to 1.8.0rc1 successful!
2022-03-15 22:43:26,326 - octoprint.plugins.softwareupdate - INFO - Saved update log to disk
2022-03-15 22:43:26,382 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk
2022-03-15 22:43:26,383 - octoprint.plugins.softwareupdate - INFO - Restarting...
2022-03-15 22:43:26,478 - octoprint.server - INFO - Shutting down...
2022-03-15 22:43:26,583 - octoprint.server - INFO - Calling on_shutdown on plugins
2022-03-15 22:43:26,585 - octoprint.events - INFO - Processing shutdown event, this will be our last event
2022-03-15 22:43:26,588 - octoprint.events - INFO - Event loop shut down
2022-03-15 22:43:26,600 - octoprint.plugins.HeaterTimeout - INFO - Shutting down...
2022-03-15 22:43:26,603 - octoprint.server - INFO - Goodbye!
2022-03-15 22:43:27,934 - octoprint.startup - INFO - ******************************************************************************
2022-03-15 22:43:27,938 - octoprint.startup - INFO - Starting OctoPrint 1.8.0rc1
2022-03-15 22:43:27,938 - octoprint.startup - INFO - ******************************************************************************
2022-03-15 22:43:28,273 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity changed from offline to online
2022-03-15 22:43:28,381 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: online
2022-03-15 22:43:28,381 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 1.1.1.1:53 is working
2022-03-15 22:43:28,381 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is working
2022-03-15 22:43:28,566 - octoprint.startup - INFO - Blacklist processing done, adding 3 blacklisted plugin versions: roomtemp (any), GcodeEditor (>=0.1.1,<=0.2.8), gcodeleveling (>=0.1.0,<=0.1.1)
2022-03-15 22:43:28,574 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages...
2022-03-15 22:43:30,087 - octoprint.startup - INFO - Added settings overlay from plugin dashboard
2022-03-15 22:43:30,101 - octoprint.plugin.core - INFO - Found 29 plugin(s) providing 29 mixin implementations, 70 hook handlers
2022-03-15 22:43:30,200 - octoprint.server.heartbeat - INFO - Starting server heartbeat, 900.0s interval
2022-03-15 22:43:30,208 - octoprint.server - INFO - Intermediary server started
2022-03-15 22:43:30,237 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/pi/.octoprint/uploads...
2022-03-15 22:43:30,255 - octoprint.filemanager.storage - INFO - ... file metadata for /home/pi/.octoprint/uploads initialized successfully.
2022-03-15 22:43:30,259 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_SHOW (needs: "Need(method='role', value='plugin_action_command_notification_show')")
2022-03-15 22:43:30,259 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_CLEAR (needs: "Need(method='role', value='plugin_action_command_notification_clear')")
2022-03-15 22:43:30,259 - octoprint.server - INFO - Added new permission from plugin action_command_prompt: PLUGIN_ACTION_COMMAND_PROMPT_INTERACT (needs: "Need(method='role', value='plugin_action_command_prompt_interact')")
2022-03-15 22:43:30,260 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_READ (needs: "Need(method='role', value='plugin_announcements_read')")
2022-03-15 22:43:30,260 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_MANAGE (needs: "Need(method='role', value='plugin_announcements_manage'), Need(method='role', value='plugin_announcements_read')")
2022-03-15 22:43:30,261 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_ADMIN (needs: "Need(method='role', value='plugin_appkeys_admin')")
2022-03-15 22:43:30,261 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_GRANT (needs: "Need(method='role', value='plugin_appkeys_user')")
2022-03-15 22:43:30,261 - octoprint.server - INFO - Added new permission from plugin backup: PLUGIN_BACKUP_ACCESS (needs: "Need(method='role', value='plugin_backup_access')")
2022-03-15 22:43:30,261 - octoprint.server - INFO - Added new permission from plugin dashboard: PLUGIN_DASHBOARD_ADMIN (needs: "Need(method='role', value='plugin_dashboard_admin')")
2022-03-15 22:43:30,262 - octoprint.server - INFO - Added new permission from plugin firmware_check: PLUGIN_FIRMWARE_CHECK_DISPLAY (needs: "Need(method='role', value='plugin_firmware_check_display')")
2022-03-15 22:43:30,262 - octoprint.server - INFO - Added new permission from plugin logging: PLUGIN_LOGGING_MANAGE (needs: "Need(method='role', value='plugin_logging_manage')")
2022-03-15 22:43:30,262 - octoprint.server - INFO - Added new permission from plugin pi_support: PLUGIN_PI_SUPPORT_STATUS (needs: "Need(method='role', value='plugin_pi_support_check')")
2022-03-15 22:43:30,263 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_LIST (needs: "Need(method='role', value='plugin_pluginmanager_manage')")
2022-03-15 22:43:30,263 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_MANAGE (needs: "Need(method='role', value='plugin_pluginmanager_manage')")
2022-03-15 22:43:30,263 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_INSTALL (needs: "Need(method='role', value='plugin_pluginmanager_manage'), Need(method='role', value='plugin_pluginmanager_install')")
2022-03-15 22:43:30,264 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CHECK (needs: "Need(method='role', value='plugin_softwareupdate_check')")
2022-03-15 22:43:30,264 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_UPDATE (needs: "Need(method='role', value='plugin_softwareupdate_update')")
2022-03-15 22:43:30,264 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CONFIGURE (needs: "Need(method='role', value='plugin_softwareupdate_configure')")
2022-03-15 22:43:30,277 - octoprint.printer.standard - INFO - Using print time estimator provided by PrintTimeGenius
2022-03-15 22:43:30,881 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip
2022-03-15 22:43:31,409 - octoprint.util.pip - INFO - Version of pip is 20.3.3
2022-03-15 22:43:31,412 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes
2022-03-15 22:43:31,412 - octoprint.util.pip - INFO - ==> pip ok -> yes
2022-03-15 22:43:31,522 - octoprint.plugins.softwareupdate - INFO - Version cache was created for another version of OctoPrint, not using it
2022-03-15 22:43:31,532 - octoprint.plugins.softwareupdate - INFO - Loaded update log from disk
2022-03-15 22:43:31,656 - octoprint.plugin.core - INFO - Initialized 29 plugin implementation(s)
2022-03-15 22:43:31,832 - octoprint.plugin.core - INFO - 29 plugin(s) registered with the system:
|  Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_notification
|  Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_prompt
|  Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/announcements
|  Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/tracking
|  Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/appkeys
|  Arc-Welder (1.0.0+u.bb71e8f) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_arc_welder
|  Backup & Restore (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/backup
|  Core Wizard (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/corewizard
|  Dashboard (1.19.8) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_dashboard
|  Discovery (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/discovery
|  DisplayLayerProgress Plugin (1.28.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_DisplayLayerProgress
|  Error Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/errortracking
|  Event Manager (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/eventmanager
|  File Check (2021.2.23) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_file_check
|  Firmware Check (2021.10.11) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_firmware_check
|  GCode Viewer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/gcodeviewer
|  HeaterTimeout (0.0.4) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_HeaterTimeout
|  Logging (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/logging
|  Navbar Temperature Plugin (0.14) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_navbartemp
|  Octolapse (0.4.1) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_octolapse
|  Pi Support Plugin (2022.3.1) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_pi_support
|  Plugin Manager (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/pluginmanager
|  Preheat Button (0.8.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_preheat
|  PrintTimeGenius Plugin (2.2.8) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_PrintTimeGenius
|  Resource Monitor (0.3.6) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_resource_monitor
|  Software Update (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/softwareupdate
|  UI Customizer (0.1.8.9) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_uicustomizer
|  Virtual Printer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/virtual_printer
|  WiFi Status (1.7.2) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_wifistatus
Prefix legend: ! = disabled, # = blacklisted, * = incompatible
2022-03-15 22:43:31,870 - octoprint.environment - INFO - Detected environment is Python 3.7.3 under Linux (linux). Details:
|  hardware:
|    cores: 4
|    freq: 1500.0
|    ram: 3971153920
|  os:
|    bits: 32
|    id: linux
|    platform: linux
|  plugins:
|    pi_support:
|      model: Raspberry Pi 4 Model B Rev 1.1
|      octopi_version: 0.18.0
|      octopiuptodate_build: 0.18.0-1.7.3-20220120112925
|      throttle_state: '0x0'
|  python:
|    pip: 20.3.3
|    version: 3.7.3
|    virtualenv: /home/pi/oprint
2022-03-15 22:43:31,891 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/webassets...
2022-03-15 22:43:31,926 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-cache...
2022-03-15 22:43:31,927 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-manifest.json...
2022-03-15 22:43:32,444 - octoprint.server - INFO - Shutting down intermediary server...
2022-03-15 22:43:32,652 - octoprint.server - INFO - Intermediary server shut down
2022-03-15 22:43:32,653 - octoprint.events - INFO - Processing startup event, this is our first event
2022-03-15 22:43:32,654 - octoprint.events - INFO - Adding 2 events to queue that were held back before startup event
2022-03-15 22:43:32,655 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue...
2022-03-15 22:43:32,663 - octoprint.server - INFO - Autoconnect on startup is configured, trying to connect to the printer...
2022-03-15 22:43:32,684 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue
2022-03-15 22:43:32,702 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json
2022-03-15 22:43:32,794 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid
2022-03-15 22:43:32,904 - octoprint.server - INFO - Trying to connect to configured serial port None
2022-03-15 22:43:33,122 - octoprint.plugins.announcements - INFO - Loaded channel _important from https://octoprint.org/feeds/important.xml in 0.29s
2022-03-15 22:43:33,235 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection"
2022-03-15 22:43:33,249 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder...
2022-03-15 22:43:33,272 - octoprint.server.util.watchdog - INFO - ... initial scan done.
2022-03-15 22:43:33,344 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 0 port/baudrate candidates: 
2022-03-15 22:43:33,344 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Error"
2022-03-15 22:43:33,345 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error"
2022-03-15 22:43:33,365 - octoprint.plugins.action_command_notification - INFO - Notifications cleared
2022-03-15 22:43:33,505 - octoprint.plugins.softwareupdate - ERROR - Could not check arc_welder for updates
Traceback (most recent call last):
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/softwareupdate/__init__.py", line 1835, in _get_current_version
    target, check, online=online, credentials=credentials
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/softwareupdate/version_checks/github_release.py", line 276, in get_latest
    target
octoprint.plugins.softwareupdate.exceptions.ConfigurationInvalid: Update configuration for arc_welder of type github_release needs all of user, repo and current set and not None
2022-03-15 22:43:33,710 - octoprint.plugins.announcements - INFO - Loaded channel _releases from https://octoprint.org/feeds/releases.xml in 0.28s
2022-03-15 22:43:34,123 - octoprint.plugins.announcements - INFO - Loaded channel _blog from https://octoprint.org/feeds/octoblog.xml in 0.27s
2022-03-15 22:43:34,421 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip
2022-03-15 22:43:34,427 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes
2022-03-15 22:43:34,427 - octoprint.util.pip - INFO - ==> pip ok -> yes
2022-03-15 22:43:34,453 - octoprint.plugins.announcements - INFO - Loaded channel _plugins from https://plugins.octoprint.org/feed.xml in 0.23s
2022-03-15 22:43:34,587 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid
2022-03-15 22:43:34,761 - octoprint.plugins.announcements - INFO - Loaded channel _octopi from https://octoprint.org/feeds/octopi.xml in 0.18s
2022-03-15 22:43:35,256 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk
2022-03-15 22:43:35,422 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on octopi._http._tcp.local.' for _http._tcp.local.
2022-03-15 22:43:36,234 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on octopi._octoprint._tcp.local.' for _octoprint._tcp.local.
2022-03-15 22:43:36,260 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance on octopi for SSDP
2022-03-15 22:43:36,296 - octoprint.server - INFO - Listening on http://127.0.0.1:5000
2022-03-15 22:43:36,367 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid
2022-03-15 22:43:36,444 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.0.100
2022-03-15 22:43:36,695 - octoprint.server.util.flask - INFO - Passively logging in user tk from ::ffff:192.168.0.100
2022-03-15 22:43:36,695 - octoprint.access.users - INFO - Logged in user: tk
2022-03-15 22:43:36,785 - octoprint.server.util.sockjs - INFO - User tk logged in on the socket from client ::ffff:192.168.0.100
2022-03-15 22:43:36,943 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip
2022-03-15 22:43:36,949 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes
2022-03-15 22:43:36,969 - octoprint.util.pip - INFO - ==> pip ok -> yes
2022-03-15 22:43:37,024 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 25.2GB. That is considered sufficient for updating.
2022-03-15 22:43:37,509 - octoprint.plugins.HeaterTimeout - INFO - Starting up...
2022-03-15 22:43:37,699 - octoprint.plugins.dashboard - INFO - Dashboard started
2022-03-15 22:43:37,701 - octoprint.JsFrontendErrors(Dash) - INFO - Js Logger (Dash) started
2022-03-15 22:43:37,790 - octoprint.plugins.uicustomizer - INFO - UI Customizer is initialized.
2022-03-15 22:43:37,790 - octoprint.plugins.wifistatus - INFO - WiFiStatus loaded!
2022-03-15 22:43:38,082 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid
2022-03-15 22:43:38,298 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'http://octopi.local/', 'path': '/', 'query_string': 'l10n=en'}
2022-03-15 22:43:41,058 - octoprint.server.util.flask - INFO - Passively logging in user tk from ::ffff:192.168.0.100
2022-03-15 22:43:41,059 - octoprint.access.users - INFO - Logged in user: tk
2022-03-15 22:43:46,076 - octoprint - ERROR - Exception on / [GET]
Traceback (most recent call last):
  File "/home/pi/oprint/lib/python3.7/site-packages/flask/app.py", line 2073, in wsgi_app
    response = self.full_dispatch_request()
  File "/home/pi/oprint/lib/python3.7/site-packages/flask/app.py", line 1518, in full_dispatch_request
    rv = self.handle_user_exception(e)
  File "/home/pi/oprint/lib/python3.7/site-packages/flask/app.py", line 1516, in full_dispatch_request
    rv = self.dispatch_request()
  File "/home/pi/oprint/lib/python3.7/site-packages/flask/app.py", line 1502, in dispatch_request
    return self.ensure_sync(self.view_functions[rule.endpoint])(**req.view_args)
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/server/views.py", line 678, in index
    response = default_view()
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/server/views.py", line 610, in default_view
    return preemptively_cached()
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/server/util/flask.py", line 1093, in decorated_function
    return f(*args, **kwargs)
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/server/util/flask.py", line 1175, in decorated_function
    return f(*args, **kwargs)
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/server/util/flask.py", line 1185, in decorated_function
    r = f(*args, **kwargs)
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/server/util/flask.py", line 831, in decorated_function
    rv = f_with_duration(*args, **kwargs)
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/server/util/flask.py", line 783, in f_with_duration
    return f(*args, **kwargs)
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/server/util/flask.py", line 1104, in decorated_function
    rv = f(*args, **kwargs)
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/server/util/flask.py", line 1129, in decorated_function
    rv = f(*args, **kwargs)
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/server/views.py", line 600, in make_default_ui
    r = make_response(render_template("index.jinja2", **render_kwargs))
  File "/home/pi/oprint/lib/python3.7/site-packages/flask/templating.py", line 150, in render_template
    ctx.app,
  File "/home/pi/oprint/lib/python3.7/site-packages/flask/templating.py", line 128, in _render
    rv = template.render(context)
  File "/home/pi/oprint/lib/python3.7/site-packages/jinja2/environment.py", line 1291, in render
    self.environment.handle_exception()
  File "/home/pi/oprint/lib/python3.7/site-packages/jinja2/environment.py", line 925, in handle_exception
    raise rewrite_traceback_stack(source=source)
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/templates/index.jinja2", line 18, in top-level template code
    {% include 'stylesheets-preload.jinja2' %}
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/templates/stylesheets-preload.jinja2", line 2, in top-level template code
    {% assets "css_libs" %}<link rel="preload" as="style" href="{{ ASSET_URL }}">{% endassets %}
  File "/home/pi/oprint/lib/python3.7/site-packages/webassets/ext/jinja2.py", line 187, in _render_assets
    urls = bundle.urls(calculate_sri=True)
  File "/home/pi/oprint/lib/python3.7/site-packages/webassets/bundle.py", line 833, in urls
    urls.extend(bundle._urls(new_ctx, extra_filters, *args, **kwargs))
  File "/home/pi/oprint/lib/python3.7/site-packages/webassets/bundle.py", line 770, in _urls
    return [{'uri': self._make_output_url(ctx),
  File "/home/pi/oprint/lib/python3.7/site-packages/webassets/bundle.py", line 724, in _make_output_url
    version = self.get_version(ctx, refresh=ctx.auto_build)
  File "/home/pi/oprint/lib/python3.7/site-packages/webassets/bundle.py", line 319, in get_version
    version = ctx.manifest.query(self, ctx)
  File "/home/pi/oprint/lib/python3.7/site-packages/webassets/version.py", line 244, in query
    self._load_manifest()
  File "/home/pi/oprint/lib/python3.7/site-packages/webassets/version.py", line 275, in _load_manifest
    self.manifest = self.json.load(f)
  File "/usr/lib/python3.7/json/__init__.py", line 296, in load
    parse_constant=parse_constant, object_pairs_hook=object_pairs_hook, **kw)
  File "/usr/lib/python3.7/json/__init__.py", line 348, in loads
    return _default_decoder.decode(s)
  File "/usr/lib/python3.7/json/decoder.py", line 337, in decode
    obj, end = self.raw_decode(s, idx=_w(s, 0).end())
  File "/usr/lib/python3.7/json/decoder.py", line 355, in raw_decode
    raise JSONDecodeError("Expecting value", s, err.value) from None
json.decoder.JSONDecodeError: Expecting value: line 1 column 1 (char 0)
2022-03-15 22:43:46,511 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.0.100
2022-03-15 22:43:46,905 - octoprint.util.jinja - WARNING - Loading plugin template '/webcams/mjpg_streamer/logitech_c920.jinja2' from '/home/pi/oprint/lib/python3.7/site-packages/octoprint_octolapse/templates/webcams/mjpg_streamer/logitech_c920.jinja2' without plugin prefix, this is deprecated and will soon no longer be supported.
2022-03-15 22:43:46,917 - octoprint.util.jinja - WARNING - Loading plugin template '/webcams/mjpg_streamer/raspi_cam_v2.jinja2' from '/home/pi/oprint/lib/python3.7/site-packages/octoprint_octolapse/templates/webcams/mjpg_streamer/raspi_cam_v2.jinja2' without plugin prefix, this is deprecated and will soon no longer be supported.
2022-03-15 22:43:46,932 - octoprint.util.jinja - WARNING - Loading plugin template '/webcams/mjpg_streamer/logitech_c250.jinja2' from '/home/pi/oprint/lib/python3.7/site-packages/octoprint_octolapse/templates/webcams/mjpg_streamer/logitech_c250.jinja2' without plugin prefix, this is deprecated and will soon no longer be supported.
2022-03-15 22:43:49,577 - octoprint.server.preemptive_cache - INFO - ... done in 11.28s
2022-03-15 22:43:59,396 - octoprint.server.util.flask - INFO - Passively logging in user tk from ::ffff:192.168.0.100
2022-03-15 22:43:59,397 - octoprint.access.users - INFO - Logged in user: tk
2022-03-15 22:44:00,365 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.0.100
2022-03-15 22:44:00,421 - octoprint.server.util.flask - INFO - Passively logging in user tk from ::ffff:192.168.0.100
2022-03-15 22:44:00,421 - octoprint.access.users - INFO - Logged in user: tk
2022-03-15 22:44:02,356 - octoprint.server.util.sockjs - INFO - User tk logged in on the socket from client ::ffff:192.168.0.100
2022-03-15 22:44:16,345 - octoprint.plugins.errortracking - INFO - Initialized error tracking
2022-03-15 22:44:19,386 - octoprint.server.util.flask - INFO - Passively logging in user tk from ::ffff:192.168.0.100
2022-03-15 22:44:19,387 - octoprint.access.users - INFO - Logged in user: tk
2022-03-15 22:44:19,528 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.0.100
2022-03-15 22:44:20,121 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.0.100
2022-03-15 22:44:20,149 - octoprint.server.util.flask - INFO - Passively logging in user tk from ::ffff:192.168.0.100
2022-03-15 22:44:20,149 - octoprint.access.users - INFO - Logged in user: tk
2022-03-15 22:44:21,382 - octoprint.server.util.sockjs - INFO - User tk logged in on the socket from client ::ffff:192.168.0.100
2022-03-15 22:45:03,937 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection"
2022-03-15 22:45:03,951 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 1 port/baudrate candidates: /dev/ttyUSB0@115200
2022-03-15 22:45:03,951 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200
2022-03-15 22:45:03,952 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200
2022-03-15 22:45:04,069 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s
2022-03-15 22:45:04,114 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2022-03-15 22:45:04,222 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Operational"
2022-03-15 22:45:04,243 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2022-03-15 22:45:04,388 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin bugfix-2.0.x (Jul 19 2021 21:05:54)"
2022-03-15 22:45:04,392 - octoprint.plugins.firmware_check - INFO - Your printer's firmware is a development build of Marlin (build date 20210719). It might be more unstable than a release version and should be kept up-to-date.. More information at https://faq.octoprint.org/warning-firmware-development
2022-03-15 22:45:04,432 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting
2022-03-15 22:45:04,446 - octoprint.util.comm - INFO - Firmware states that it supports emergency GCODEs to be sent without waiting for an acknowledgement first
2022-03-15 22:45:45,540 - octoprint.server.util.flask - INFO - Passively logging in user tk from ::ffff:192.168.0.100
2022-03-15 22:45:45,541 - octoprint.access.users - INFO - Logged in user: tk
2022-03-15 22:45:45,741 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.0.100
2022-03-15 22:45:46,331 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.0.100
2022-03-15 22:45:46,362 - octoprint.server.util.flask - INFO - Passively logging in user tk from ::ffff:192.168.0.100
2022-03-15 22:45:46,363 - octoprint.access.users - INFO - Logged in user: tk
2022-03-15 22:45:47,535 - octoprint.server.util.sockjs - INFO - User tk logged in on the socket from client ::ffff:192.168.0.100
2022-03-15 22:48:27,119 - octoprint.plugins.dashboard - INFO - GcodePreProcessor started processing.
2022-03-15 22:48:27,120 - octoprint.plugins.DisplayLayerProgress - INFO - FilePreProcessor. Checking LayerExpressions.
2022-03-15 22:48:27,121 - octoprint.plugins.DisplayLayerProgress - INFO - FilePreProcessor. LayerExpression valid. Start processing...
2022-03-15 22:48:28,296 - octoprint.filemanager.analysis - INFO - Starting analysis of local:11_BJY48_Motor_Cog_0.2mm_PLA_I3MEGA_15m.gcode
2022-03-15 22:48:28,369 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile
2022-03-15 22:48:28,380 - octoprint.plugins.DisplayLayerProgress - INFO - Did NOT reading total height from MetaFile, because analyse was done for not selected file. Current: '-' Analyse for: '11_BJY48_Motor_Cog_0.2mm_PLA_I3MEGA_15m.gcode'
2022-03-15 22:48:28,383 - octoprint.plugins.dashboard - INFO - GcodePreProcessor found layers: 46
2022-03-15 22:48:28,383 - octoprint.plugins.dashboard - INFO - GcodePreProcessor found filament changes: 0
2022-03-15 22:48:28,384 - octoprint.plugins.dashboard - INFO - GcodePreProcessor saving layer count in file metadata
2022-03-15 22:48:29,363 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile
2022-03-15 22:48:29,373 - octoprint.filemanager.analysis - INFO - Analysis of entry local:11_BJY48_Motor_Cog_0.2mm_PLA_I3MEGA_15m.gcode finished, needed 1.08s
2022-03-15 22:48:29,382 - octoprint.plugins.DisplayLayerProgress - INFO - Did NOT reading total height from MetaFile, because analyse was done for not selected file. Current: '-' Analyse for: '11_BJY48_Motor_Cog_0.2mm_PLA_I3MEGA_15m.gcode'
2022-03-15 22:48:29,390 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile
2022-03-15 22:48:29,396 - octoprint.plugins.DisplayLayerProgress - INFO - Did NOT reading total height from MetaFile, because analyse was done for not selected file. Current: '-' Analyse for: '11_BJY48_Motor_Cog_0.2mm_PLA_I3MEGA_15m.gcode'
2022-03-15 22:48:31,348 - octoprint.plugins.dashboard - INFO - GcodePreProcessor started processing.
2022-03-15 22:48:31,349 - octoprint.plugins.DisplayLayerProgress - INFO - FilePreProcessor. Checking LayerExpressions.
2022-03-15 22:48:31,349 - octoprint.plugins.DisplayLayerProgress - INFO - FilePreProcessor. LayerExpression valid. Start processing...
2022-03-15 22:48:31,963 - octoprint.filemanager.analysis - INFO - Starting analysis of local:11_BJY48_Motor_Cog_0.2mm_PLA_I3MEGA_15m.aw.gcode
2022-03-15 22:48:32,006 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile
2022-03-15 22:48:32,044 - octoprint.plugins.DisplayLayerProgress - INFO - Did NOT reading total height from MetaFile, because analyse was done for not selected file. Current: '-' Analyse for: '11_BJY48_Motor_Cog_0.2mm_PLA_I3MEGA_15m.aw.gcode'
2022-03-15 22:48:33,037 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile
2022-03-15 22:48:33,050 - octoprint.filemanager.analysis - INFO - Analysis of entry local:11_BJY48_Motor_Cog_0.2mm_PLA_I3MEGA_15m.aw.gcode finished, needed 1.09s
2022-03-15 22:48:33,055 - octoprint.plugins.DisplayLayerProgress - INFO - Did NOT reading total height from MetaFile, because analyse was done for not selected file. Current: '-' Analyse for: '11_BJY48_Motor_Cog_0.2mm_PLA_I3MEGA_15m.aw.gcode'
2022-03-15 22:48:33,069 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile
2022-03-15 22:48:33,077 - octoprint.plugins.DisplayLayerProgress - INFO - Did NOT reading total height from MetaFile, because analyse was done for not selected file. Current: '-' Analyse for: '11_BJY48_Motor_Cog_0.2mm_PLA_I3MEGA_15m.aw.gcode'
2022-03-15 22:48:49,021 - octoprint.printer.standard.job - INFO - Print job selected - origin: local, path: 11_BJY48_Motor_Cog_0.2mm_PLA_I3MEGA_15m.aw.gcode, owner: tk, user: tk
2022-03-15 22:48:49,041 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting"
2022-03-15 22:48:49,047 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: 11_BJY48_Motor_Cog_0.2mm_PLA_I3MEGA_15m.aw.gcode, owner: tk, user: tk
2022-03-15 22:48:49,056 - octoprint.plugins.DisplayLayerProgress - INFO - File '/home/pi/.octoprint/uploads/11_BJY48_Motor_Cog_0.2mm_PLA_I3MEGA_15m.aw.gcode' selected. Determining number of layers.
2022-03-15 22:48:49,072 - octoprint.plugins.DisplayLayerProgress - INFO - Read total height from MetaFile
2022-03-15 22:48:49,183 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2022-03-15 22:48:49,194 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Printing"
2022-03-15 22:48:49,244 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile
2022-03-15 22:48:49,284 - octoprint.plugins.DisplayLayerProgress - INFO - File select-event processing done!'
2022-03-15 22:48:49,315 - octoprint.plugins.DisplayLayerProgress - INFO - Printing started. Detailed progress started.{'name': '11_BJY48_Motor_Cog_0.2mm_PLA_I3MEGA_15m.aw.gcode', 'path': '11_BJY48_Motor_Cog_0.2mm_PLA_I3MEGA_15m.aw.gcode', 'origin': 'local', 'size': 662226, 'owner': 'tk', 'user': 'tk'}
2022-03-15 22:48:49,320 - octoprint.plugins.dashboard - INFO - Gcode not pre-processed by Dashboard. Processing now.
2022-03-15 22:48:49,350 - octoprint.plugins.dashboard - INFO - GcodePreProcessor started processing.
2022-03-15 22:48:49,778 - octoprint.plugins.dashboard - INFO - Gcode pre-processing done.
2022-03-15 22:48:49,778 - octoprint.plugins.dashboard - INFO - GcodePreProcessor found layers: 46
2022-03-15 22:48:49,779 - octoprint.plugins.dashboard - INFO - GcodePreProcessor found filament changes: 0
2022-03-15 22:48:49,779 - octoprint.plugins.dashboard - INFO - GcodePreProcessor saving layer count in file metadata
2022-03-15 22:48:58,834 - octoprint.util.comm - INFO - Cancelling job on behalf of user tk
2022-03-15 22:48:58,839 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Cancelling"
2022-03-15 22:48:58,845 - octoprint.util.comm - INFO - Force-sending M108 to the printer
2022-03-15 22:48:58,864 - octoprint.printer.standard.job - INFO - Print job cancelled - origin: local, path: 11_BJY48_Motor_Cog_0.2mm_PLA_I3MEGA_15m.aw.gcode, owner: tk, user: tk
2022-03-15 22:48:58,870 - octoprint.plugins.DisplayLayerProgress - INFO - Printing stopped. Detailed progress stopped.
2022-03-15 22:48:59,027 - octoprint.plugins.DisplayLayerProgress - INFO - Printing stopped. Detailed progress stopped.
2022-03-15 22:49:07,656 - octoprint.util.comm - INFO - Changing monitoring state from "Cancelling" to "Operational"
2022-03-15 22:50:38,741 - octoprint.printer.standard.job - INFO - Print job deselected - user: n/a
2022-03-15 22:50:46,890 - octoprint.plugins.dashboard - INFO - GcodePreProcessor started processing.
2022-03-15 22:50:46,895 - octoprint.plugins.DisplayLayerProgress - INFO - FilePreProcessor. Checking LayerExpressions.
2022-03-15 22:50:46,895 - octoprint.plugins.DisplayLayerProgress - INFO - FilePreProcessor. LayerExpression valid. Start processing...
2022-03-15 22:50:47,838 - octoprint.filemanager.analysis - INFO - Starting analysis of local:11_BJY48_Vertical_30m.gcode
2022-03-15 22:50:47,888 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile
2022-03-15 22:50:47,921 - octoprint.plugins.DisplayLayerProgress - INFO - Did NOT reading total height from MetaFile, because analyse was done for not selected file. Current: '-' Analyse for: '11_BJY48_Vertical_30m.gcode'
2022-03-15 22:50:47,924 - octoprint.plugins.dashboard - INFO - GcodePreProcessor found layers: 136
2022-03-15 22:50:47,924 - octoprint.plugins.dashboard - INFO - GcodePreProcessor found filament changes: 0
2022-03-15 22:50:47,925 - octoprint.plugins.dashboard - INFO - GcodePreProcessor saving layer count in file metadata
2022-03-15 22:50:48,404 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile
2022-03-15 22:50:48,410 - octoprint.filemanager.analysis - INFO - Analysis of entry local:11_BJY48_Vertical_30m.gcode finished, needed 0.57s
2022-03-15 22:50:48,418 - octoprint.plugins.DisplayLayerProgress - INFO - Did NOT reading total height from MetaFile, because analyse was done for not selected file. Current: '-' Analyse for: '11_BJY48_Vertical_30m.gcode'
2022-03-15 22:50:48,423 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile
2022-03-15 22:50:48,433 - octoprint.plugins.DisplayLayerProgress - INFO - Did NOT reading total height from MetaFile, because analyse was done for not selected file. Current: '-' Analyse for: '11_BJY48_Vertical_30m.gcode'
2022-03-15 22:50:50,264 - octoprint.plugins.dashboard - INFO - GcodePreProcessor started processing.
2022-03-15 22:50:50,265 - octoprint.plugins.DisplayLayerProgress - INFO - FilePreProcessor. Checking LayerExpressions.
2022-03-15 22:50:50,265 - octoprint.plugins.DisplayLayerProgress - INFO - FilePreProcessor. LayerExpression valid. Start processing...
2022-03-15 22:50:51,143 - octoprint.filemanager.analysis - INFO - Starting analysis of local:11_BJY48_Vertical_30m.aw.gcode
2022-03-15 22:50:51,175 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile
2022-03-15 22:50:51,208 - octoprint.plugins.DisplayLayerProgress - INFO - Did NOT reading total height from MetaFile, because analyse was done for not selected file. Current: '-' Analyse for: '11_BJY48_Vertical_30m.aw.gcode'
2022-03-15 22:50:52,227 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile
2022-03-15 22:50:52,237 - octoprint.filemanager.analysis - INFO - Analysis of entry local:11_BJY48_Vertical_30m.aw.gcode finished, needed 1.09s
2022-03-15 22:50:52,273 - octoprint.plugins.DisplayLayerProgress - INFO - Did NOT reading total height from MetaFile, because analyse was done for not selected file. Current: '-' Analyse for: '11_BJY48_Vertical_30m.aw.gcode'
2022-03-15 22:50:52,284 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile
2022-03-15 22:50:52,298 - octoprint.plugins.DisplayLayerProgress - INFO - Did NOT reading total height from MetaFile, because analyse was done for not selected file. Current: '-' Analyse for: '11_BJY48_Vertical_30m.aw.gcode'
2022-03-15 22:51:00,685 - octoprint.printer.standard.job - INFO - Print job selected - origin: local, path: 11_BJY48_Vertical_30m.aw.gcode, owner: tk, user: tk
2022-03-15 22:51:00,697 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting"
2022-03-15 22:51:00,700 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: 11_BJY48_Vertical_30m.aw.gcode, owner: tk, user: tk
2022-03-15 22:51:00,720 - octoprint.plugins.DisplayLayerProgress - INFO - File '/home/pi/.octoprint/uploads/11_BJY48_Vertical_30m.aw.gcode' selected. Determining number of layers.
2022-03-15 22:51:00,723 - octoprint.plugins.DisplayLayerProgress - INFO - Read total height from MetaFile
2022-03-15 22:51:00,802 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2022-03-15 22:51:00,814 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Printing"
2022-03-15 22:51:01,031 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile
2022-03-15 22:51:01,061 - octoprint.plugins.DisplayLayerProgress - INFO - File select-event processing done!'
2022-03-15 22:51:01,100 - octoprint.plugins.DisplayLayerProgress - INFO - Printing started. Detailed progress started.{'name': '11_BJY48_Vertical_30m.aw.gcode', 'path': '11_BJY48_Vertical_30m.aw.gcode', 'origin': 'local', 'size': 773012, 'owner': 'tk', 'user': 'tk'}
2022-03-15 22:51:01,118 - octoprint.plugins.dashboard - INFO - Gcode not pre-processed by Dashboard. Processing now.
2022-03-15 22:51:01,121 - octoprint.plugins.dashboard - INFO - GcodePreProcessor started processing.
2022-03-15 22:51:01,650 - octoprint.plugins.dashboard - INFO - Gcode pre-processing done.
2022-03-15 22:51:01,650 - octoprint.plugins.dashboard - INFO - GcodePreProcessor found layers: 136
2022-03-15 22:51:01,650 - octoprint.plugins.dashboard - INFO - GcodePreProcessor found filament changes: 0
2022-03-15 22:51:01,651 - octoprint.plugins.dashboard - INFO - GcodePreProcessor saving layer count in file metadata
2022-03-15 22:55:43,601 - octoprint.util.comm - INFO - Cancelling job on behalf of user tk
2022-03-15 22:55:43,604 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Cancelling"
2022-03-15 22:55:43,607 - octoprint.util.comm - INFO - Force-sending M108 to the printer
2022-03-15 22:55:43,634 - octoprint.printer.standard.job - INFO - Print job cancelled - origin: local, path: 11_BJY48_Vertical_30m.aw.gcode, owner: tk, user: tk
2022-03-15 22:55:43,639 - octoprint.plugins.DisplayLayerProgress - INFO - Printing stopped. Detailed progress stopped.
2022-03-15 22:55:43,682 - octoprint.plugins.DisplayLayerProgress - INFO - Printing stopped. Detailed progress stopped.
2022-03-15 22:55:45,290 - octoprint.util.comm - INFO - Changing monitoring state from "Cancelling" to "Operational"
2022-03-15 22:56:34,794 - octoprint.printer.standard.job - INFO - Print job deselected - user: n/a
2022-03-15 22:56:57,415 - octoprint.plugins.dashboard - INFO - GcodePreProcessor started processing.
2022-03-15 22:56:57,417 - octoprint.plugins.DisplayLayerProgress - INFO - FilePreProcessor. Checking LayerExpressions.
2022-03-15 22:56:57,417 - octoprint.plugins.DisplayLayerProgress - INFO - FilePreProcessor. LayerExpression valid. Start processing...
2022-03-15 22:56:58,604 - octoprint.filemanager.analysis - INFO - Starting analysis of local:11_BJY48_Motor_Cog_0.2mm_PLA_I3MEGA_15m.gcode
2022-03-15 22:56:58,651 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile
2022-03-15 22:56:58,677 - octoprint.plugins.DisplayLayerProgress - INFO - Did NOT reading total height from MetaFile, because analyse was done for not selected file. Current: '-' Analyse for: '11_BJY48_Motor_Cog_0.2mm_PLA_I3MEGA_15m.gcode'
2022-03-15 22:56:58,685 - octoprint.plugins.dashboard - INFO - GcodePreProcessor found layers: 46
2022-03-15 22:56:58,686 - octoprint.plugins.dashboard - INFO - GcodePreProcessor found filament changes: 0
2022-03-15 22:56:58,686 - octoprint.plugins.dashboard - INFO - GcodePreProcessor saving layer count in file metadata
2022-03-15 22:56:59,735 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile
2022-03-15 22:56:59,769 - octoprint.filemanager.analysis - INFO - Analysis of entry local:11_BJY48_Motor_Cog_0.2mm_PLA_I3MEGA_15m.gcode finished, needed 1.16s
2022-03-15 22:56:59,792 - octoprint.plugins.DisplayLayerProgress - INFO - Did NOT reading total height from MetaFile, because analyse was done for not selected file. Current: '-' Analyse for: '11_BJY48_Motor_Cog_0.2mm_PLA_I3MEGA_15m.gcode'
2022-03-15 22:56:59,835 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile
2022-03-15 22:56:59,887 - octoprint.plugins.DisplayLayerProgress - INFO - Did NOT reading total height from MetaFile, because analyse was done for not selected file. Current: '-' Analyse for: '11_BJY48_Motor_Cog_0.2mm_PLA_I3MEGA_15m.gcode'
2022-03-15 22:56:59,955 - octoprint.plugins.dashboard - INFO - GcodePreProcessor started processing.
2022-03-15 22:56:59,956 - octoprint.plugins.DisplayLayerProgress - INFO - FilePreProcessor. Checking LayerExpressions.
2022-03-15 22:56:59,956 - octoprint.plugins.DisplayLayerProgress - INFO - FilePreProcessor. LayerExpression valid. Start processing...
2022-03-15 22:57:00,825 - octoprint.filemanager.analysis - INFO - Starting analysis of local:11_BJY48_Motor_Cog_0.2mm_PLA_I3MEGA_15m.aw.gcode
2022-03-15 22:57:00,832 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile
2022-03-15 22:57:00,870 - octoprint.plugins.DisplayLayerProgress - INFO - Did NOT reading total height from MetaFile, because analyse was done for not selected file. Current: '-' Analyse for: '11_BJY48_Motor_Cog_0.2mm_PLA_I3MEGA_15m.aw.gcode'
2022-03-15 22:57:01,862 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile
2022-03-15 22:57:01,871 - octoprint.filemanager.analysis - INFO - Analysis of entry local:11_BJY48_Motor_Cog_0.2mm_PLA_I3MEGA_15m.aw.gcode finished, needed 1.05s
2022-03-15 22:57:01,876 - octoprint.plugins.DisplayLayerProgress - INFO - Did NOT reading total height from MetaFile, because analyse was done for not selected file. Current: '-' Analyse for: '11_BJY48_Motor_Cog_0.2mm_PLA_I3MEGA_15m.aw.gcode'
2022-03-15 22:57:01,895 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile
2022-03-15 22:57:01,903 - octoprint.plugins.DisplayLayerProgress - INFO - Did NOT reading total height from MetaFile, because analyse was done for not selected file. Current: '-' Analyse for: '11_BJY48_Motor_Cog_0.2mm_PLA_I3MEGA_15m.aw.gcode'
2022-03-15 22:57:03,359 - octoprint.printer.standard.job - INFO - Print job selected - origin: local, path: 11_BJY48_Motor_Cog_0.2mm_PLA_I3MEGA_15m.aw.gcode, owner: tk, user: tk
2022-03-15 22:57:03,374 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting"
2022-03-15 22:57:03,379 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: 11_BJY48_Motor_Cog_0.2mm_PLA_I3MEGA_15m.aw.gcode, owner: tk, user: tk
2022-03-15 22:57:03,401 - octoprint.plugins.DisplayLayerProgress - INFO - File '/home/pi/.octoprint/uploads/11_BJY48_Motor_Cog_0.2mm_PLA_I3MEGA_15m.aw.gcode' selected. Determining number of layers.
2022-03-15 22:57:03,408 - octoprint.plugins.DisplayLayerProgress - INFO - Read total height from MetaFile
2022-03-15 22:57:03,467 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2022-03-15 22:57:03,478 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Printing"
2022-03-15 22:57:03,603 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile
2022-03-15 22:57:03,622 - octoprint.plugins.DisplayLayerProgress - INFO - File select-event processing done!'
2022-03-15 22:57:03,663 - octoprint.plugins.DisplayLayerProgress - INFO - Printing started. Detailed progress started.{'name': '11_BJY48_Motor_Cog_0.2mm_PLA_I3MEGA_15m.aw.gcode', 'path': '11_BJY48_Motor_Cog_0.2mm_PLA_I3MEGA_15m.aw.gcode', 'origin': 'local', 'size': 662226, 'owner': 'tk', 'user': 'tk'}
2022-03-15 22:57:03,668 - octoprint.plugins.dashboard - INFO - Gcode not pre-processed by Dashboard. Processing now.
2022-03-15 22:57:03,673 - octoprint.plugins.dashboard - INFO - GcodePreProcessor started processing.
2022-03-15 22:57:04,068 - octoprint.plugins.dashboard - INFO - Gcode pre-processing done.
2022-03-15 22:57:04,068 - octoprint.plugins.dashboard - INFO - GcodePreProcessor found layers: 46
2022-03-15 22:57:04,068 - octoprint.plugins.dashboard - INFO - GcodePreProcessor found filament changes: 0
2022-03-15 22:57:04,069 - octoprint.plugins.dashboard - INFO - GcodePreProcessor saving layer count in file metadata
2022-03-15 22:58:30,203 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 23:01:45,379 - octoprint.util.comm - INFO - Cancelling job on behalf of user tk
2022-03-15 23:01:45,388 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Cancelling"
2022-03-15 23:01:45,390 - octoprint.util.comm - INFO - Force-sending M108 to the printer
2022-03-15 23:01:45,411 - octoprint.printer.standard.job - INFO - Print job cancelled - origin: local, path: 11_BJY48_Motor_Cog_0.2mm_PLA_I3MEGA_15m.aw.gcode, owner: tk, user: tk
2022-03-15 23:01:45,416 - octoprint.plugins.DisplayLayerProgress - INFO - Printing stopped. Detailed progress stopped.
2022-03-15 23:01:45,461 - octoprint.plugins.DisplayLayerProgress - INFO - Printing stopped. Detailed progress stopped.
2022-03-15 23:01:45,668 - octoprint.util.comm - INFO - Changing monitoring state from "Cancelling" to "Operational"
2022-03-15 23:02:24,937 - octoprint.util.comm - INFO - Starting job on behalf of user tk
2022-03-15 23:02:24,944 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting"
2022-03-15 23:02:24,961 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: 11_BJY48_Motor_Cog_0.2mm_PLA_I3MEGA_15m.aw.gcode, owner: tk, user: tk
2022-03-15 23:02:25,001 - octoprint.plugins.DisplayLayerProgress - INFO - Printing started. Detailed progress started.{'name': '11_BJY48_Motor_Cog_0.2mm_PLA_I3MEGA_15m.aw.gcode', 'path': '11_BJY48_Motor_Cog_0.2mm_PLA_I3MEGA_15m.aw.gcode', 'origin': 'local', 'size': 662226, 'owner': 'tk', 'user': 'tk'}
2022-03-15 23:02:29,174 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2022-03-15 23:02:29,184 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Printing"
2022-03-15 23:05:45,250 - octoprint.util.comm - INFO - Cancelling job on behalf of user tk
2022-03-15 23:05:45,255 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Cancelling"
2022-03-15 23:05:45,257 - octoprint.util.comm - INFO - Force-sending M108 to the printer
2022-03-15 23:05:45,282 - octoprint.printer.standard.job - INFO - Print job cancelled - origin: local, path: 11_BJY48_Motor_Cog_0.2mm_PLA_I3MEGA_15m.aw.gcode, owner: tk, user: tk
2022-03-15 23:05:45,289 - octoprint.plugins.DisplayLayerProgress - INFO - Printing stopped. Detailed progress stopped.
2022-03-15 23:05:45,352 - octoprint.plugins.DisplayLayerProgress - INFO - Printing stopped. Detailed progress stopped.
2022-03-15 23:05:46,132 - octoprint.util.comm - INFO - Changing monitoring state from "Cancelling" to "Operational"
2022-03-15 23:07:38,637 - octoprint.util.comm - ERROR - Unexpected error while reading from serial port
Traceback (most recent call last):
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3987, in _readline
    ret = self._serial.readline()
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 6658, in readline
    c = self.read(1)
  File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 596, in read
    'device reports readiness to read but returned no data '
serial.serialutil.SerialException: device reports readiness to read but returned no data (device disconnected or multiple access on port?)
2022-03-15 23:07:38,725 - octoprint.util.comm - ERROR - Please see https://faq.octoprint.org/serialerror for possible reasons of this.
2022-03-15 23:07:38,736 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Offline after error"
2022-03-15 23:07:38,744 - octoprint.plugins.action_command_notification - INFO - Notifications cleared
2022-03-15 23:13:30,205 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2022-03-15 23:20:42,951 - octoprint.server.api.system - INFO - Performing command for core:restart: sudo service octoprint restart
2022-03-15 23:20:43,232 - octoprint.server - INFO - Shutting down...
2022-03-15 23:20:43,505 - octoprint.server.api.system - WARNING - Command for core:restart failed with return code -15:
! 
! STDOUT:
! 
! 
! STDERR:
2022-03-15 23:20:44,222 - octoprint.server - INFO - Calling on_shutdown on plugins
2022-03-15 23:20:44,224 - octoprint.events - INFO - Processing shutdown event, this will be our last event
2022-03-15 23:20:44,229 - octoprint.events - INFO - Event loop shut down
2022-03-15 23:20:44,252 - octoprint.plugins.HeaterTimeout - INFO - Shutting down...
2022-03-15 23:20:44,256 - octoprint.server - INFO - Goodbye!
2022-03-15 23:20:45,659 - octoprint.startup - INFO - ******************************************************************************
2022-03-15 23:20:45,664 - octoprint.startup - INFO - Starting OctoPrint 1.8.0rc1
2022-03-15 23:20:45,665 - octoprint.startup - INFO - ******************************************************************************
2022-03-15 23:20:45,996 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity changed from offline to online
2022-03-15 23:20:46,102 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: online
2022-03-15 23:20:46,102 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 1.1.1.1:53 is working
2022-03-15 23:20:46,102 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is working
2022-03-15 23:20:46,334 - octoprint.startup - INFO - Blacklist processing done, adding 3 blacklisted plugin versions: roomtemp (any), GcodeEditor (>=0.1.1,<=0.2.8), gcodeleveling (>=0.1.0,<=0.1.1)
2022-03-15 23:20:46,342 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages...
2022-03-15 23:20:47,856 - octoprint.plugins.errortracking - INFO - Initialized error tracking
2022-03-15 23:20:47,930 - octoprint.startup - INFO - Added settings overlay from plugin dashboard
2022-03-15 23:20:47,943 - octoprint.plugin.core - INFO - Found 29 plugin(s) providing 29 mixin implementations, 70 hook handlers
2022-03-15 23:20:48,053 - octoprint.server.heartbeat - INFO - Starting server heartbeat, 900.0s interval
2022-03-15 23:20:48,062 - octoprint.server - INFO - Intermediary server started
2022-03-15 23:20:48,080 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/pi/.octoprint/uploads...
2022-03-15 23:20:48,098 - octoprint.filemanager.storage - INFO - ... file metadata for /home/pi/.octoprint/uploads initialized successfully.
2022-03-15 23:20:48,102 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_SHOW (needs: "Need(method='role', value='plugin_action_command_notification_show')")
2022-03-15 23:20:48,103 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_CLEAR (needs: "Need(method='role', value='plugin_action_command_notification_clear')")
2022-03-15 23:20:48,103 - octoprint.server - INFO - Added new permission from plugin action_command_prompt: PLUGIN_ACTION_COMMAND_PROMPT_INTERACT (needs: "Need(method='role', value='plugin_action_command_prompt_interact')")
2022-03-15 23:20:48,104 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_READ (needs: "Need(method='role', value='plugin_announcements_read')")
2022-03-15 23:20:48,104 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_MANAGE (needs: "Need(method='role', value='plugin_announcements_manage'), Need(method='role', value='plugin_announcements_read')")
2022-03-15 23:20:48,105 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_ADMIN (needs: "Need(method='role', value='plugin_appkeys_admin')")
2022-03-15 23:20:48,105 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_GRANT (needs: "Need(method='role', value='plugin_appkeys_user')")
2022-03-15 23:20:48,105 - octoprint.server - INFO - Added new permission from plugin backup: PLUGIN_BACKUP_ACCESS (needs: "Need(method='role', value='plugin_backup_access')")
2022-03-15 23:20:48,106 - octoprint.server - INFO - Added new permission from plugin dashboard: PLUGIN_DASHBOARD_ADMIN (needs: "Need(method='role', value='plugin_dashboard_admin')")
2022-03-15 23:20:48,106 - octoprint.server - INFO - Added new permission from plugin firmware_check: PLUGIN_FIRMWARE_CHECK_DISPLAY (needs: "Need(method='role', value='plugin_firmware_check_display')")
2022-03-15 23:20:48,106 - octoprint.server - INFO - Added new permission from plugin logging: PLUGIN_LOGGING_MANAGE (needs: "Need(method='role', value='plugin_logging_manage')")
2022-03-15 23:20:48,107 - octoprint.server - INFO - Added new permission from plugin pi_support: PLUGIN_PI_SUPPORT_STATUS (needs: "Need(method='role', value='plugin_pi_support_check')")
2022-03-15 23:20:48,108 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_LIST (needs: "Need(method='role', value='plugin_pluginmanager_manage')")
2022-03-15 23:20:48,110 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_MANAGE (needs: "Need(method='role', value='plugin_pluginmanager_manage')")
2022-03-15 23:20:48,112 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_INSTALL (needs: "Need(method='role', value='plugin_pluginmanager_manage'), Need(method='role', value='plugin_pluginmanager_install')")
2022-03-15 23:20:48,113 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CHECK (needs: "Need(method='role', value='plugin_softwareupdate_check')")
2022-03-15 23:20:48,119 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_UPDATE (needs: "Need(method='role', value='plugin_softwareupdate_update')")
2022-03-15 23:20:48,119 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CONFIGURE (needs: "Need(method='role', value='plugin_softwareupdate_configure')")
2022-03-15 23:20:48,129 - octoprint.printer.standard - INFO - Using print time estimator provided by PrintTimeGenius
2022-03-15 23:20:48,721 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip
2022-03-15 23:20:49,253 - octoprint.util.pip - INFO - Version of pip is 20.3.3
2022-03-15 23:20:49,255 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes
2022-03-15 23:20:49,256 - octoprint.util.pip - INFO - ==> pip ok -> yes
2022-03-15 23:20:49,369 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk
2022-03-15 23:20:49,378 - octoprint.plugins.softwareupdate - INFO - Loaded update log from disk
2022-03-15 23:20:49,499 - octoprint.plugin.core - INFO - Initialized 29 plugin implementation(s)
2022-03-15 23:20:49,680 - octoprint.plugin.core - INFO - 29 plugin(s) registered with the system:
|  Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_notification
|  Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_prompt
|  Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/announcements
|  Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/tracking
|  Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/appkeys
|  Arc-Welder (1.0.0+u.bb71e8f) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_arc_welder
|  Backup & Restore (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/backup
|  Core Wizard (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/corewizard
|  Dashboard (1.19.8) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_dashboard
|  Discovery (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/discovery
|  DisplayLayerProgress Plugin (1.28.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_DisplayLayerProgress
|  Error Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/errortracking
|  Event Manager (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/eventmanager
|  File Check (2021.2.23) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_file_check
|  Firmware Check (2021.10.11) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_firmware_check
|  GCode Viewer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/gcodeviewer
|  HeaterTimeout (0.0.4) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_HeaterTimeout
|  Logging (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/logging
|  Navbar Temperature Plugin (0.14) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_navbartemp
|  Octolapse (0.4.1) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_octolapse
|  Pi Support Plugin (2022.3.1) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_pi_support
|  Plugin Manager (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/pluginmanager
|  Preheat Button (0.8.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_preheat
|  PrintTimeGenius Plugin (2.2.8) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_PrintTimeGenius
|  Resource Monitor (0.3.6) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_resource_monitor
|  Software Update (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/softwareupdate
|  UI Customizer (0.1.8.9) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_uicustomizer
|  Virtual Printer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/virtual_printer
|  WiFi Status (1.7.2) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_wifistatus
Prefix legend: ! = disabled, # = blacklisted, * = incompatible
2022-03-15 23:20:49,708 - octoprint.environment - INFO - Detected environment is Python 3.7.3 under Linux (linux). Details:
|  hardware:
|    cores: 4
|    freq: 1500.0
|    ram: 3971153920
|  os:
|    bits: 32
|    id: linux
|    platform: linux
|  plugins:
|    pi_support:
|      model: Raspberry Pi 4 Model B Rev 1.1
|      octopi_version: 0.18.0
|      octopiuptodate_build: 0.18.0-1.7.3-20220120112925
|      throttle_state: '0x0'
|  python:
|    pip: 20.3.3
|    version: 3.7.3
|    virtualenv: /home/pi/oprint
2022-03-15 23:20:49,722 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/webassets...
2022-03-15 23:20:49,723 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-cache...
2022-03-15 23:20:49,724 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-manifest.json...
2022-03-15 23:20:50,240 - octoprint.server - INFO - Shutting down intermediary server...
2022-03-15 23:20:50,300 - octoprint.server - INFO - Intermediary server shut down
2022-03-15 23:20:50,302 - octoprint.events - INFO - Processing startup event, this is our first event
2022-03-15 23:20:50,302 - octoprint.events - INFO - Adding 2 events to queue that were held back before startup event
2022-03-15 23:20:50,303 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue...
2022-03-15 23:20:50,305 - octoprint.server - INFO - Autoconnect on startup is configured, trying to connect to the printer...
2022-03-15 23:20:50,323 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json
2022-03-15 23:20:50,323 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue
2022-03-15 23:20:50,443 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid
2022-03-15 23:20:50,562 - octoprint.server - INFO - Trying to connect to configured serial port None
2022-03-15 23:20:50,816 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection"
2022-03-15 23:20:50,839 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder...
2022-03-15 23:20:50,860 - octoprint.server.util.watchdog - INFO - ... initial scan done.
2022-03-15 23:20:50,887 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 1 port/baudrate candidates: /dev/ttyUSB0@115200
2022-03-15 23:20:50,888 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200
2022-03-15 23:20:50,889 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200
2022-03-15 23:20:51,023 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s
2022-03-15 23:20:51,070 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2022-03-15 23:20:51,166 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Operational"
2022-03-15 23:20:51,192 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2022-03-15 23:20:51,340 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin bugfix-2.0.x (Jul 19 2021 21:05:54)"
2022-03-15 23:20:51,377 - octoprint.plugins.firmware_check - INFO - Your printer's firmware is a development build of Marlin (build date 20210719). It might be more unstable than a release version and should be kept up-to-date.. More information at https://faq.octoprint.org/warning-firmware-development
2022-03-15 23:20:51,457 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting
2022-03-15 23:20:51,492 - octoprint.util.comm - INFO - Firmware states that it supports emergency GCODEs to be sent without waiting for an acknowledgement first
2022-03-15 23:20:51,885 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid
2022-03-15 23:20:52,890 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on octopi._http._tcp.local.' for _http._tcp.local.
2022-03-15 23:20:53,708 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on octopi._octoprint._tcp.local.' for _octoprint._tcp.local.
2022-03-15 23:20:53,712 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance on octopi for SSDP
2022-03-15 23:20:53,775 - octoprint.server - INFO - Listening on http://127.0.0.1:5000
2022-03-15 23:20:53,851 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid
2022-03-15 23:20:53,903 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.0.100
2022-03-15 23:20:54,045 - octoprint.server.util.flask - INFO - Passively logging in user tk from ::ffff:192.168.0.100
2022-03-15 23:20:54,046 - octoprint.access.users - INFO - Logged in user: tk
2022-03-15 23:20:54,093 - octoprint.server.util.sockjs - INFO - User tk logged in on the socket from client ::ffff:192.168.0.100
2022-03-15 23:20:54,427 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip
2022-03-15 23:20:54,430 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes
2022-03-15 23:20:54,451 - octoprint.util.pip - INFO - ==> pip ok -> yes
2022-03-15 23:20:54,461 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 25.2GB. That is considered sufficient for updating.
2022-03-15 23:20:54,902 - octoprint.plugins.HeaterTimeout - INFO - Starting up...
2022-03-15 23:20:55,051 - octoprint.plugins.dashboard - INFO - Dashboard started
2022-03-15 23:20:55,054 - octoprint.JsFrontendErrors(Dash) - INFO - Js Logger (Dash) started
2022-03-15 23:20:55,184 - octoprint.plugins.uicustomizer - INFO - UI Customizer is initialized.
2022-03-15 23:20:55,184 - octoprint.plugins.wifistatus - INFO - WiFiStatus loaded!
2022-03-15 23:20:55,539 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid
2022-03-15 23:20:55,924 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'http://octopi.local/', 'path': '/', 'query_string': 'l10n=en'}
2022-03-15 23:20:58,716 - octoprint.server.util.flask - INFO - Passively logging in user tk from ::ffff:192.168.0.100
2022-03-15 23:20:58,716 - octoprint.access.users - INFO - Logged in user: tk
2022-03-15 23:21:04,652 - octoprint.util.jinja - WARNING - Loading plugin template '/webcams/mjpg_streamer/logitech_c920.jinja2' from '/home/pi/oprint/lib/python3.7/site-packages/octoprint_octolapse/templates/webcams/mjpg_streamer/logitech_c920.jinja2' without plugin prefix, this is deprecated and will soon no longer be supported.
2022-03-15 23:21:04,662 - octoprint.util.jinja - WARNING - Loading plugin template '/webcams/mjpg_streamer/logitech_c920.jinja2' from '/home/pi/oprint/lib/python3.7/site-packages/octoprint_octolapse/templates/webcams/mjpg_streamer/logitech_c920.jinja2' without plugin prefix, this is deprecated and will soon no longer be supported.
2022-03-15 23:21:04,673 - octoprint.util.jinja - WARNING - Loading plugin template '/webcams/mjpg_streamer/raspi_cam_v2.jinja2' from '/home/pi/oprint/lib/python3.7/site-packages/octoprint_octolapse/templates/webcams/mjpg_streamer/raspi_cam_v2.jinja2' without plugin prefix, this is deprecated and will soon no longer be supported.
2022-03-15 23:21:04,689 - octoprint.util.jinja - WARNING - Loading plugin template '/webcams/mjpg_streamer/logitech_c250.jinja2' from '/home/pi/oprint/lib/python3.7/site-packages/octoprint_octolapse/templates/webcams/mjpg_streamer/logitech_c250.jinja2' without plugin prefix, this is deprecated and will soon no longer be supported.
2022-03-15 23:21:04,822 - octoprint.util.jinja - WARNING - Loading plugin template '/webcams/mjpg_streamer/raspi_cam_v2.jinja2' from '/home/pi/oprint/lib/python3.7/site-packages/octoprint_octolapse/templates/webcams/mjpg_streamer/raspi_cam_v2.jinja2' without plugin prefix, this is deprecated and will soon no longer be supported.
2022-03-15 23:21:09,178 - octoprint.server.preemptive_cache - INFO - ... done in 13.25s
2022-03-15 23:21:09,553 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.0.100
2022-03-15 23:21:10,299 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.0.100
2022-03-15 23:21:10,353 - octoprint.server.util.flask - INFO - Passively logging in user tk from ::ffff:192.168.0.100
2022-03-15 23:21:10,353 - octoprint.access.users - INFO - Logged in user: tk
2022-03-15 23:21:12,403 - octoprint.server.util.sockjs - INFO - User tk logged in on the socket from client ::ffff:192.168.0.100
2022-03-15 23:21:26,940 - octoprint.printer.standard.job - INFO - Print job selected - origin: local, path: 11_BJY48_Motor_Cog_0.2mm_PLA_I3MEGA_15m.gcode, owner: tk, user: tk
2022-03-15 23:21:26,956 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting"
2022-03-15 23:21:26,960 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: 11_BJY48_Motor_Cog_0.2mm_PLA_I3MEGA_15m.gcode, owner: tk, user: tk
2022-03-15 23:21:26,969 - octoprint.plugins.DisplayLayerProgress - INFO - File '/home/pi/.octoprint/uploads/11_BJY48_Motor_Cog_0.2mm_PLA_I3MEGA_15m.gcode' selected. Determining number of layers.
2022-03-15 23:21:26,981 - octoprint.plugins.DisplayLayerProgress - INFO - Read total height from MetaFile
2022-03-15 23:21:27,295 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile
2022-03-15 23:21:27,495 - octoprint.plugins.DisplayLayerProgress - INFO - File select-event processing done!'
2022-03-15 23:21:27,551 - octoprint.plugins.DisplayLayerProgress - INFO - Printing started. Detailed progress started.{'name': '11_BJY48_Motor_Cog_0.2mm_PLA_I3MEGA_15m.gcode', 'path': '11_BJY48_Motor_Cog_0.2mm_PLA_I3MEGA_15m.gcode', 'origin': 'local', 'size': 1191673, 'owner': 'tk', 'user': 'tk'}
2022-03-15 23:21:33,818 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2022-03-15 23:21:33,828 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Printing"
2022-03-15 23:25:53,245 - octoprint.util.comm - INFO - Cancelling job on behalf of user tk
2022-03-15 23:25:53,254 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Cancelling"
2022-03-15 23:25:53,256 - octoprint.util.comm - INFO - Force-sending M108 to the printer
2022-03-15 23:25:53,282 - octoprint.printer.standard.job - INFO - Print job cancelled - origin: local, path: 11_BJY48_Motor_Cog_0.2mm_PLA_I3MEGA_15m.gcode, owner: tk, user: tk
2022-03-15 23:25:53,286 - octoprint.plugins.DisplayLayerProgress - INFO - Printing stopped. Detailed progress stopped.
2022-03-15 23:25:53,453 - octoprint.plugins.DisplayLayerProgress - INFO - Printing stopped. Detailed progress stopped.
2022-03-15 23:25:53,490 - octoprint.util.comm - INFO - Changing monitoring state from "Cancelling" to "Operational"
2022-03-15 23:26:17,254 - octoprint.util.comm - ERROR - Unexpected error while reading from serial port
Traceback (most recent call last):
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3987, in _readline
    ret = self._serial.readline()
  File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 6658, in readline
    c = self.read(1)
  File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 596, in read
    'device reports readiness to read but returned no data '
serial.serialutil.SerialException: device reports readiness to read but returned no data (device disconnected or multiple access on port?)
2022-03-15 23:26:17,349 - octoprint.util.comm - ERROR - Please see https://faq.octoprint.org/serialerror for possible reasons of this.
2022-03-15 23:26:17,372 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Offline after error"
2022-03-15 23:26:17,377 - octoprint.plugins.action_command_notification - INFO - Notifications cleared