2020-08-03 07:45:15,547 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2020-08-03 07:45:15,553 - octoprint.server - INFO - --- Log roll over detected --------------------------------------------------- 2020-08-03 07:45:15,554 - octoprint.server - INFO - OctoPrint 1.4.1rc4 2020-08-03 07:45:15,560 - octoprint.plugin.core - INFO - 26 plugin(s) registered with the system: | Access Anywhere - The Spaghetti Detective (1.3.3) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_thespaghettidetective | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/appkeys | Backup & Restore (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/backup | Bed Visualizer (0.1.14) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_bedlevelvisualizer | Core Wizard (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/corewizard | Cost Estimation (2.1.3) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_costestimation | Discovery (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/discovery | Error Tracking (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/errortracking | Filament Manager (0.5.3) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_filamentmanager | Filament Sensor NG (1.0.2) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_filamentsensorng | File Check (2020.7.6) (bundled) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_file_check | Firmware Check (2020.6.22) (bundled) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_firmware_check | GCode Viewer (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/gcodeviewer | Logging (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/logging | Login UI (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/loginui | Octolapse (0.4.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_octolapse | OctoPrint Ikea Tradfri (1.3.1) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_ikea_tradfri | Pi Support Plugin (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/pluginmanager | PrintTimeGenius Plugin (2.2.5) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_PrintTimeGenius | Software Update (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/softwareupdate | Virtual Printer (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2020-08-03 07:45:15,582 - octoprint.environment - INFO - Detected environment is Python 2.7.16 under Linux (linux2). Details: | hardware: | cores: 4 | freq: 1400.0 | ram: 917016576 | os: | id: linux | platform: linux2 | plugins: | pi_support: | model: Raspberry Pi 3 Model B Plus Rev 1.3 | octopi_version: 0.17.0 | python: | pip: 19.3.1 | version: 2.7.16 | virtualenv: /home/pi/oprint 2020-08-03 07:45:15,582 - octoprint.server - INFO - ------------------------------------------------------------------------------ 2020-08-03 07:45:30,637 - octoprint.plugins.tracking - INFO - Sent tracking event pong, payload: {'python': '2.7.16', 'ram': 917016576, u'octopi_version': u'0.17.0', 'version': u'1.4.1rc4', u'plugins': u'ikea_tradfri:1.3.1,costestimation:2.1.3,filamentsensorng:1.0.2,bedlevelvisualizer:0.1.14,thespaghettidetective:1.3.3,filamentmanager:0.5.3,printtimegenius:2.2.5,octolapse:0.4.0', 'pip': '19.3.1', 'cores': 4, 'freq': 1400.0, u'pi_model': u'Raspberry Pi 3 Model B Plus Rev 1.3', 'os': 'linux'} 2020-08-03 07:45:32,822 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 345620} 2020-08-03 08:00:15,550 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2020-08-03 08:00:32,824 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 346520} 2020-08-03 08:15:15,554 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2020-08-03 08:15:33,040 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 347420} 2020-08-03 08:30:15,557 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2020-08-03 08:30:33,482 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 348320} 2020-08-03 08:45:15,561 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2020-08-03 08:45:32,949 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 349220} 2020-08-03 09:00:15,565 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2020-08-03 09:00:33,090 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 350120} 2020-08-03 09:11:14,869 - octoprint.plugins.thespaghettidetective - ERROR - Server websocket is closing 2020-08-03 09:11:28,054 - octoprint.plugins.thespaghettidetective - ERROR - Backing off 0.350424 seconds: Failed to connect to websocket server 2020-08-03 09:11:28,541 - octoprint.plugins.thespaghettidetective - ERROR - Backing off 0.251489 seconds: Failed to connect to websocket server 2020-08-03 09:11:28,857 - octoprint.plugins.thespaghettidetective - ERROR - Backing off 1.449975 seconds: Failed to connect to websocket server 2020-08-03 09:11:30,412 - octoprint.plugins.thespaghettidetective - ERROR - Backing off 1.545365 seconds: Failed to connect to websocket server 2020-08-03 09:11:32,078 - octoprint.plugins.thespaghettidetective - ERROR - Backing off 3.209378 seconds: Failed to connect to websocket server 2020-08-03 09:11:35,393 - octoprint.plugins.thespaghettidetective - ERROR - Backing off 6.162942 seconds: Failed to connect to websocket server 2020-08-03 09:11:41,660 - octoprint.plugins.thespaghettidetective - ERROR - Backing off 19.804924 seconds: Failed to connect to websocket server 2020-08-03 09:11:57,683 - octoprint.plugins.thespaghettidetective - ERROR - Server websocket is closing 2020-08-03 09:12:03,616 - octoprint.plugins.thespaghettidetective - ERROR - Backing off 37.060243 seconds: Failed to connect to websocket server 2020-08-03 09:12:16,740 - octoprint.plugins.thespaghettidetective - ERROR - Server websocket is closing 2020-08-03 09:12:42,838 - octoprint.plugins.thespaghettidetective - ERROR - Backing off 87.204325 seconds: Failed to connect to websocket server 2020-08-03 09:15:15,570 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2020-08-03 09:15:32,886 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 351020} 2020-08-03 09:15:50,166 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.87 2020-08-03 09:15:51,464 - octoprint.server.util.sockjs - WARNING - Unknown user/session combo: badgemaker:321B66985F06488090D60B5B0E567E35 2020-08-03 09:30:15,573 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2020-08-03 09:30:33,108 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 351920} 2020-08-03 09:30:51,488 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.87 2020-08-03 09:30:56,726 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.87 2020-08-03 09:30:57,941 - octoprint.server.util.sockjs - WARNING - Unknown user/session combo: badgemaker:321B66985F06488090D60B5B0E567E35 2020-08-03 09:45:15,576 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2020-08-03 09:45:33,088 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 352820} 2020-08-03 09:45:57,947 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.87 2020-08-03 09:46:03,036 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.87 2020-08-03 09:46:04,176 - octoprint.server.util.sockjs - WARNING - Unknown user/session combo: badgemaker:321B66985F06488090D60B5B0E567E35 2020-08-03 10:00:15,579 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2020-08-03 10:00:32,917 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 353720} 2020-08-03 10:01:04,190 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.87 2020-08-03 10:01:09,292 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.87 2020-08-03 10:01:10,432 - octoprint.server.util.sockjs - WARNING - Unknown user/session combo: badgemaker:321B66985F06488090D60B5B0E567E35 2020-08-03 10:15:15,583 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2020-08-03 10:15:33,020 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 354620} 2020-08-03 10:16:10,439 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.87 2020-08-03 10:16:15,546 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.87 2020-08-03 10:16:16,627 - octoprint.server.util.sockjs - WARNING - Unknown user/session combo: badgemaker:321B66985F06488090D60B5B0E567E35 2020-08-03 10:30:15,585 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2020-08-03 10:30:33,354 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 355520} 2020-08-03 10:31:16,639 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.87 2020-08-03 10:31:21,762 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.87 2020-08-03 10:31:22,866 - octoprint.server.util.sockjs - WARNING - Unknown user/session combo: badgemaker:321B66985F06488090D60B5B0E567E35 2020-08-03 10:45:15,590 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2020-08-03 10:45:32,946 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 356420} 2020-08-03 10:46:22,884 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.87 2020-08-03 10:46:27,956 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.87 2020-08-03 10:46:29,063 - octoprint.server.util.sockjs - WARNING - Unknown user/session combo: badgemaker:321B66985F06488090D60B5B0E567E35 2020-08-03 11:00:15,594 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2020-08-03 11:00:33,047 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 357320} 2020-08-03 11:01:29,073 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.87 2020-08-03 11:01:34,155 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.87 2020-08-03 11:01:35,307 - octoprint.server.util.sockjs - WARNING - Unknown user/session combo: badgemaker:321B66985F06488090D60B5B0E567E35 2020-08-03 11:15:15,598 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2020-08-03 11:15:33,172 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 358220} 2020-08-03 11:16:35,315 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.87 2020-08-03 11:16:40,410 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.87 2020-08-03 11:16:41,567 - octoprint.server.util.sockjs - WARNING - Unknown user/session combo: badgemaker:321B66985F06488090D60B5B0E567E35 2020-08-03 11:30:15,602 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2020-08-03 11:30:32,919 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 359120} 2020-08-03 11:31:12,667 - octoprint.server.util.flask - INFO - Passively logging in user badgemaker from ::ffff:192.168.1.87 2020-08-03 11:31:12,670 - octoprint.access.users - INFO - Cleaning up user session 653494D450F8462A9626566AC6D72844 for user badgemaker 2020-08-03 11:31:12,674 - octoprint.access.users - INFO - Logged out user: badgemaker 2020-08-03 11:31:12,677 - octoprint.access.users - INFO - Cleaning up user session 311399DA03A54C63913E05C11EF56247 for user badgemaker 2020-08-03 11:31:12,680 - octoprint.access.users - INFO - Logged out user: badgemaker 2020-08-03 11:31:12,685 - octoprint.access.users - INFO - Logged in user: badgemaker 2020-08-03 11:31:13,030 - octoprint.server.util.flask - INFO - Passively logging in user badgemaker from ::ffff:192.168.1.87 2020-08-03 11:31:13,032 - octoprint.access.users - INFO - Logged in user: badgemaker 2020-08-03 11:31:19,210 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.87 2020-08-03 11:31:19,345 - octoprint.server.util.flask - INFO - Passively logging in user badgemaker from ::ffff:192.168.1.87 2020-08-03 11:31:19,348 - octoprint.access.users - INFO - Logged in user: badgemaker 2020-08-03 11:31:25,663 - octoprint.plugins.announcements - INFO - Loaded channel _important from https://octoprint.org/feeds/important.xml in 0.64s 2020-08-03 11:31:26,624 - octoprint.plugins.announcements - INFO - Loaded channel _releases from https://octoprint.org/feeds/releases.xml in 0.75s 2020-08-03 11:31:27,252 - octoprint.plugins.announcements - INFO - Loaded channel _blog from https://octoprint.org/feeds/octoblog.xml in 0.57s 2020-08-03 11:31:27,738 - octoprint.plugins.announcements - INFO - Loaded channel _plugins from https://plugins.octoprint.org/feed.xml in 0.39s 2020-08-03 11:31:28,033 - octoprint.plugins.announcements - INFO - Loaded channel _octopi from https://octoprint.org/feeds/octopi.xml in 0.2s 2020-08-03 11:31:28,387 - octoprint.server.util.sockjs - INFO - User badgemaker logged in on the socket from client ::ffff:192.168.1.87 2020-08-03 11:31:28,708 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from https://plugins.octoprint.org/plugins.json 2020-08-03 11:31:30,306 - octoprint.plugins.pluginmanager - INFO - Loaded plugin notices data from https://plugins.octoprint.org/notices.json 2020-08-03 11:31:32,055 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk 2020-08-03 11:31:34,406 - tornado.access - WARNING - 404 GET /plugin/octolapse/getSnapshot?file_type=thumbnail&camera_guid=354def78-9eea-409a-ad23-ee966dfff4ba&apikey=&time=1596450701939 (::ffff:192.168.1.87) 2.49ms 2020-08-03 11:31:34,496 - tornado.access - WARNING - 404 GET /plugin/octolapse/getSnapshot?file_type=snapshot&camera_guid=354def78-9eea-409a-ad23-ee966dfff4ba&apikey=&time=1596450701940 (::ffff:192.168.1.87) 2.41ms 2020-08-03 11:31:36,116 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2020-08-03 11:31:36,160 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 7 port/baudrate candidates: /dev/ttyUSB0@115200, /dev/ttyUSB0@250000, /dev/ttyUSB0@230400, /dev/ttyUSB0@57600, /dev/ttyUSB0@38400, /dev/ttyUSB0@19200, /dev/ttyUSB0@9600 2020-08-03 11:31:36,161 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200 2020-08-03 11:31:36,163 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200 2020-08-03 11:31:36,172 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2020-08-03 11:31:36,177 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2020-08-03 11:31:36,490 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Operational" 2020-08-03 11:31:36,512 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2020-08-03 11:31:39,609 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin Creality 3D" 2020-08-03 11:31:39,885 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting 2020-08-03 11:31:40,064 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {u'printer_baudrate': 0, u'printer_port': u'AUTO', 'firmware_name': u'Marlin Creality 3D'} 2020-08-03 11:31:41,573 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.87 2020-08-03 11:31:44,657 - octoprint.printer.standard.job - INFO - Print job selected - origin: local, path: 0.4LH_Squares.gcode, owner: badgemaker, user: badgemaker 2020-08-03 11:31:44,720 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting" 2020-08-03 11:31:44,735 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: 0.4LH_Squares.gcode, owner: badgemaker, user: badgemaker 2020-08-03 11:31:44,803 - octoprint.plugin - ERROR - Error while calling plugin filamentsensorng Traceback (most recent call last): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/plugin/__init__.py", line 230, in call_plugin result = getattr(plugin, method)(*args, **kwargs) File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_filamentsensorng/__init__.py", line 105, in on_event if event is Events.PRINT_STARTED and self.no_filament(): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_filamentsensorng/__init__.py", line 97, in no_filament return GPIO.input(self.pin) != self.switch RuntimeError: Please set pin numbering mode using GPIO.setmode(GPIO.BOARD) or GPIO.setmode(GPIO.BCM) 2020-08-03 11:31:45,046 - octoprint.plugins.tracking - INFO - Sent tracking event print_started, payload: {'origin': u'local', 'file': '6507c70cde8b6c520aafa5667f540f448c425668'} 2020-08-03 11:31:46,834 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.87 2020-08-03 11:31:46,858 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Cancelling" 2020-08-03 11:31:46,883 - octoprint.util.comm - INFO - Changing monitoring state from "Cancelling" to "Printing" 2020-08-03 11:31:46,976 - octoprint.printer.standard.job - INFO - Print job cancelled - origin: local, path: 0.4LH_Squares.gcode, owner: badgemaker, user: None 2020-08-03 11:31:47,094 - octoprint.plugins.filamentsensorng - INFO - PrintCancelled: Disabling filament sensor. 2020-08-03 11:31:47,101 - octoprint.plugin - ERROR - Error while calling plugin filamentsensorng Traceback (most recent call last): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/plugin/__init__.py", line 230, in call_plugin result = getattr(plugin, method)(*args, **kwargs) File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_filamentsensorng/__init__.py", line 129, in on_event GPIO.remove_event_detect(self.pin) RuntimeError: Please set pin numbering mode using GPIO.setmode(GPIO.BOARD) or GPIO.setmode(GPIO.BCM) 2020-08-03 11:31:47,332 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Operational" 2020-08-03 11:31:47,341 - octoprint.plugins.filamentmanager - INFO - Filament used: 0.0 mm (tool0) 2020-08-03 11:31:47,425 - octoprint.plugins.filamentmanager - WARNING - No selected spool for tool0 2020-08-03 11:31:47,446 - octoprint.plugins.tracking - INFO - Sent tracking event print_cancelled, payload: {'origin': u'local', 'file': '6507c70cde8b6c520aafa5667f540f448c425668', u'elapsed': 2} 2020-08-03 11:31:47,719 - octoprint.plugins.filamentsensorng - INFO - PrintFailed: Disabling filament sensor. 2020-08-03 11:31:47,720 - octoprint.plugin - ERROR - Error while calling plugin filamentsensorng Traceback (most recent call last): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/plugin/__init__.py", line 230, in call_plugin result = getattr(plugin, method)(*args, **kwargs) File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_filamentsensorng/__init__.py", line 129, in on_event GPIO.remove_event_detect(self.pin) RuntimeError: Please set pin numbering mode using GPIO.setmode(GPIO.BOARD) or GPIO.setmode(GPIO.BCM) 2020-08-03 11:31:47,782 - octoprint.plugins.ikea_tradfri - INFO - Schedule turn off in 30 s 2020-08-03 11:31:48,035 - octoprint.plugins.tracking - INFO - Sent tracking event print_failed, payload: {'origin': u'local', u'reason': u'cancelled', 'file': '6507c70cde8b6c520aafa5667f540f448c425668', u'elapsed': 2} 2020-08-03 11:31:49,104 - octoprint.server.util.sockjs - WARNING - Unknown user/session combo: badgemaker:321B66985F06488090D60B5B0E567E35 2020-08-03 11:32:14,018 - octoprint.server.util.flask - INFO - Passively logging in user badgemaker from ::ffff:192.168.1.87 2020-08-03 11:32:14,020 - octoprint.access.users - INFO - Logged in user: badgemaker 2020-08-03 11:32:14,388 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.87 2020-08-03 11:32:17,817 - octoprint.plugins.ikea_tradfri - INFO - stop 2020-08-03 11:32:17,825 - octoprint.plugins.ikea_tradfri - ERROR - [-] libcoap: could not find libcoap. 2020-08-03 11:32:18,105 - octoprint.plugins.ikea_tradfri - INFO - Settings saved 2020-08-03 11:32:18,109 - octoprint.plugins.ikea_tradfri - INFO - connection_failled 2020-08-03 11:32:18,111 - octoprint.plugins.ikea_tradfri - ERROR - Failed to get psk key (run_gateway_put_request) 2020-08-03 11:32:18,180 - octoprint.plugins.ikea_tradfri - INFO - Settings saved 2020-08-03 11:32:18,182 - octoprint.plugins.ikea_tradfri - INFO - connection_failled 2020-08-03 11:32:30,957 - octoprint.server.util.flask - INFO - Passively logging in user badgemaker from ::ffff:192.168.1.87 2020-08-03 11:32:30,960 - octoprint.access.users - INFO - Logged in user: badgemaker 2020-08-03 11:32:33,714 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.87 2020-08-03 11:32:33,879 - octoprint.server.util.flask - INFO - Passively logging in user badgemaker from ::ffff:192.168.1.87 2020-08-03 11:32:33,881 - octoprint.access.users - INFO - Logged in user: badgemaker 2020-08-03 11:32:39,183 - octoprint.server.util.sockjs - INFO - User badgemaker logged in on the socket from client ::ffff:192.168.1.87 2020-08-03 11:32:40,809 - tornado.access - WARNING - 404 GET /plugin/octolapse/getSnapshot?file_type=thumbnail&camera_guid=354def78-9eea-409a-ad23-ee966dfff4ba&apikey=&time=1596450768553 (::ffff:192.168.1.87) 2.62ms 2020-08-03 11:32:40,837 - tornado.access - WARNING - 404 GET /plugin/octolapse/getSnapshot?file_type=snapshot&camera_guid=354def78-9eea-409a-ad23-ee966dfff4ba&apikey=&time=1596450768554 (::ffff:192.168.1.87) 2.50ms 2020-08-03 11:33:33,624 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting" 2020-08-03 11:33:33,656 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: 0.4LH_Squares.gcode, owner: badgemaker, user: badgemaker 2020-08-03 11:33:33,751 - octoprint.plugin - ERROR - Error while calling plugin filamentsensorng Traceback (most recent call last): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/plugin/__init__.py", line 230, in call_plugin result = getattr(plugin, method)(*args, **kwargs) File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_filamentsensorng/__init__.py", line 105, in on_event if event is Events.PRINT_STARTED and self.no_filament(): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_filamentsensorng/__init__.py", line 97, in no_filament return GPIO.input(self.pin) != self.switch RuntimeError: Please set pin numbering mode using GPIO.setmode(GPIO.BOARD) or GPIO.setmode(GPIO.BCM) 2020-08-03 11:33:34,027 - octoprint.plugins.tracking - INFO - Sent tracking event print_started, payload: {'origin': u'local', 'file': '6507c70cde8b6c520aafa5667f540f448c425668'} 2020-08-03 11:33:35,683 - octoprint.util.comm - INFO - Changing monitoring state from "Cancelling" to "Printing" 2020-08-03 11:33:35,683 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Cancelling" 2020-08-03 11:33:35,721 - octoprint.plugins.filamentmanager - INFO - Filament used: 0.0 mm (tool0) 2020-08-03 11:33:35,726 - octoprint.printer.standard.job - INFO - Print job cancelled - origin: local, path: 0.4LH_Squares.gcode, owner: badgemaker, user: None 2020-08-03 11:33:35,731 - octoprint.plugins.filamentmanager - WARNING - No selected spool for tool0 2020-08-03 11:33:36,161 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer. 2020-08-03 11:33:36,218 - octoprint.plugins.filamentsensorng - INFO - PrintCancelled: Disabling filament sensor. 2020-08-03 11:33:36,238 - octoprint.plugin - ERROR - Error while calling plugin filamentsensorng Traceback (most recent call last): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/plugin/__init__.py", line 230, in call_plugin result = getattr(plugin, method)(*args, **kwargs) File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_filamentsensorng/__init__.py", line 129, in on_event GPIO.remove_event_detect(self.pin) RuntimeError: Please set pin numbering mode using GPIO.setmode(GPIO.BOARD) or GPIO.setmode(GPIO.BCM) 2020-08-03 11:33:36,377 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Operational" 2020-08-03 11:33:36,405 - backoff - INFO - Backing off capture_jpeg(...) for 0.5s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:33:36,447 - octoprint.plugins.filamentsensorng - INFO - PrintFailed: Disabling filament sensor. 2020-08-03 11:33:36,450 - octoprint.plugin - ERROR - Error while calling plugin filamentsensorng Traceback (most recent call last): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/plugin/__init__.py", line 230, in call_plugin result = getattr(plugin, method)(*args, **kwargs) File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_filamentsensorng/__init__.py", line 129, in on_event GPIO.remove_event_detect(self.pin) RuntimeError: Please set pin numbering mode using GPIO.setmode(GPIO.BOARD) or GPIO.setmode(GPIO.BCM) 2020-08-03 11:33:36,510 - octoprint.plugins.ikea_tradfri - INFO - Schedule turn off in 30 s 2020-08-03 11:33:36,521 - octoprint.plugins.tracking - INFO - Sent tracking event print_cancelled, payload: {'origin': u'local', 'file': '6507c70cde8b6c520aafa5667f540f448c425668', u'elapsed': 2} 2020-08-03 11:33:36,800 - octoprint.plugins.tracking - INFO - Sent tracking event print_failed, payload: {'origin': u'local', u'reason': u'cancelled', 'file': '6507c70cde8b6c520aafa5667f540f448c425668', u'elapsed': 2} 2020-08-03 11:33:36,949 - backoff - INFO - Backing off capture_jpeg(...) for 1.4s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:33:38,424 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:33:41,640 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting" 2020-08-03 11:33:41,668 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: 0.4LH_Squares.gcode, owner: badgemaker, user: badgemaker 2020-08-03 11:33:41,804 - octoprint.plugin - ERROR - Error while calling plugin filamentsensorng Traceback (most recent call last): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/plugin/__init__.py", line 230, in call_plugin result = getattr(plugin, method)(*args, **kwargs) File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_filamentsensorng/__init__.py", line 105, in on_event if event is Events.PRINT_STARTED and self.no_filament(): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_filamentsensorng/__init__.py", line 97, in no_filament return GPIO.input(self.pin) != self.switch RuntimeError: Please set pin numbering mode using GPIO.setmode(GPIO.BOARD) or GPIO.setmode(GPIO.BCM) 2020-08-03 11:33:42,036 - octoprint.plugins.tracking - INFO - Sent tracking event print_started, payload: {'origin': u'local', 'file': '6507c70cde8b6c520aafa5667f540f448c425668'} 2020-08-03 11:33:43,727 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Cancelling" 2020-08-03 11:33:43,752 - octoprint.util.comm - INFO - Changing monitoring state from "Cancelling" to "Printing" 2020-08-03 11:33:43,783 - octoprint.printer.standard.job - INFO - Print job cancelled - origin: local, path: 0.4LH_Squares.gcode, owner: badgemaker, user: None 2020-08-03 11:33:44,193 - octoprint.plugins.filamentsensorng - INFO - PrintCancelled: Disabling filament sensor. 2020-08-03 11:33:44,196 - octoprint.plugin - ERROR - Error while calling plugin filamentsensorng Traceback (most recent call last): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/plugin/__init__.py", line 230, in call_plugin result = getattr(plugin, method)(*args, **kwargs) File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_filamentsensorng/__init__.py", line 129, in on_event GPIO.remove_event_detect(self.pin) RuntimeError: Please set pin numbering mode using GPIO.setmode(GPIO.BOARD) or GPIO.setmode(GPIO.BCM) 2020-08-03 11:33:44,306 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Operational" 2020-08-03 11:33:44,360 - octoprint.plugins.filamentsensorng - INFO - PrintFailed: Disabling filament sensor. 2020-08-03 11:33:44,363 - octoprint.plugin - ERROR - Error while calling plugin filamentsensorng Traceback (most recent call last): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/plugin/__init__.py", line 230, in call_plugin result = getattr(plugin, method)(*args, **kwargs) File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_filamentsensorng/__init__.py", line 129, in on_event GPIO.remove_event_detect(self.pin) RuntimeError: Please set pin numbering mode using GPIO.setmode(GPIO.BOARD) or GPIO.setmode(GPIO.BCM) 2020-08-03 11:33:44,421 - octoprint.plugins.ikea_tradfri - INFO - Schedule turn off in 52 s 2020-08-03 11:33:44,445 - octoprint.plugins.filamentmanager - INFO - Filament used: 0.0 mm (tool0) 2020-08-03 11:33:44,452 - octoprint.plugins.filamentmanager - WARNING - No selected spool for tool0 2020-08-03 11:33:44,484 - octoprint.plugins.tracking - INFO - Sent tracking event print_cancelled, payload: {'origin': u'local', 'file': '6507c70cde8b6c520aafa5667f540f448c425668', u'elapsed': 2} 2020-08-03 11:33:44,863 - octoprint.plugins.tracking - INFO - Sent tracking event print_failed, payload: {'origin': u'local', u'reason': u'cancelled', 'file': '6507c70cde8b6c520aafa5667f540f448c425668', u'elapsed': 2} 2020-08-03 11:34:36,428 - octoprint.plugins.ikea_tradfri - INFO - stop 2020-08-03 11:34:36,438 - octoprint.plugins.ikea_tradfri - ERROR - [-] libcoap: could not find libcoap. 2020-08-03 11:34:36,557 - octoprint.plugins.ikea_tradfri - INFO - Settings saved 2020-08-03 11:34:36,559 - octoprint.plugins.ikea_tradfri - INFO - connection_failled 2020-08-03 11:34:36,560 - octoprint.plugins.ikea_tradfri - ERROR - Failed to get psk key (run_gateway_put_request) 2020-08-03 11:34:36,628 - octoprint.plugins.ikea_tradfri - INFO - Settings saved 2020-08-03 11:34:36,629 - octoprint.plugins.ikea_tradfri - INFO - connection_failled 2020-08-03 11:40:36,297 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting" 2020-08-03 11:40:36,330 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: 0.4LH_Squares.gcode, owner: badgemaker, user: badgemaker 2020-08-03 11:40:36,447 - octoprint.plugin - ERROR - Error while calling plugin filamentsensorng Traceback (most recent call last): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/plugin/__init__.py", line 230, in call_plugin result = getattr(plugin, method)(*args, **kwargs) File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_filamentsensorng/__init__.py", line 105, in on_event if event is Events.PRINT_STARTED and self.no_filament(): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_filamentsensorng/__init__.py", line 97, in no_filament return GPIO.input(self.pin) != self.switch RuntimeError: Please set pin numbering mode using GPIO.setmode(GPIO.BOARD) or GPIO.setmode(GPIO.BCM) 2020-08-03 11:40:36,920 - octoprint.plugins.tracking - INFO - Sent tracking event print_started, payload: {'origin': u'local', 'file': '6507c70cde8b6c520aafa5667f540f448c425668'} 2020-08-03 11:40:38,502 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Cancelling" 2020-08-03 11:40:38,509 - octoprint.util.comm - INFO - Changing monitoring state from "Cancelling" to "Printing" 2020-08-03 11:40:38,544 - octoprint.printer.standard.job - INFO - Print job cancelled - origin: local, path: 0.4LH_Squares.gcode, owner: badgemaker, user: None 2020-08-03 11:40:38,621 - octoprint.plugins.filamentsensorng - INFO - PrintCancelled: Disabling filament sensor. 2020-08-03 11:40:38,623 - octoprint.plugin - ERROR - Error while calling plugin filamentsensorng Traceback (most recent call last): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/plugin/__init__.py", line 230, in call_plugin result = getattr(plugin, method)(*args, **kwargs) File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_filamentsensorng/__init__.py", line 129, in on_event GPIO.remove_event_detect(self.pin) RuntimeError: Please set pin numbering mode using GPIO.setmode(GPIO.BOARD) or GPIO.setmode(GPIO.BCM) 2020-08-03 11:40:38,815 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Operational" 2020-08-03 11:40:38,869 - octoprint.plugins.filamentmanager - INFO - Filament used: 0.0 mm (tool0) 2020-08-03 11:40:38,892 - octoprint.plugins.filamentmanager - WARNING - No selected spool for tool0 2020-08-03 11:40:39,180 - octoprint.plugins.tracking - INFO - Sent tracking event print_cancelled, payload: {'origin': u'local', 'file': '6507c70cde8b6c520aafa5667f540f448c425668', u'elapsed': 2} 2020-08-03 11:40:39,198 - octoprint.plugins.filamentsensorng - INFO - PrintFailed: Disabling filament sensor. 2020-08-03 11:40:39,200 - octoprint.plugin - ERROR - Error while calling plugin filamentsensorng Traceback (most recent call last): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/plugin/__init__.py", line 230, in call_plugin result = getattr(plugin, method)(*args, **kwargs) File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_filamentsensorng/__init__.py", line 129, in on_event GPIO.remove_event_detect(self.pin) RuntimeError: Please set pin numbering mode using GPIO.setmode(GPIO.BOARD) or GPIO.setmode(GPIO.BCM) 2020-08-03 11:40:39,318 - octoprint.plugins.ikea_tradfri - INFO - Schedule turn off in 30 s 2020-08-03 11:40:39,755 - octoprint.plugins.tracking - INFO - Sent tracking event print_failed, payload: {'origin': u'local', u'reason': u'cancelled', 'file': '6507c70cde8b6c520aafa5667f540f448c425668', u'elapsed': 2} 2020-08-03 11:40:59,775 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.87 2020-08-03 11:41:09,335 - octoprint.plugins.ikea_tradfri - INFO - stop 2020-08-03 11:41:09,344 - octoprint.plugins.ikea_tradfri - ERROR - [-] libcoap: could not find libcoap. 2020-08-03 11:41:09,454 - octoprint.plugins.ikea_tradfri - INFO - Settings saved 2020-08-03 11:41:09,457 - octoprint.plugins.ikea_tradfri - INFO - connection_failled 2020-08-03 11:41:09,458 - octoprint.plugins.ikea_tradfri - ERROR - Failed to get psk key (run_gateway_put_request) 2020-08-03 11:41:09,522 - octoprint.plugins.ikea_tradfri - INFO - Settings saved 2020-08-03 11:41:09,523 - octoprint.plugins.ikea_tradfri - INFO - connection_failled 2020-08-03 11:41:12,282 - octoprint.server.util.flask - INFO - Passively logging in user badgemaker from ::ffff:192.168.1.87 2020-08-03 11:41:12,286 - octoprint.access.users - INFO - Logged in user: badgemaker 2020-08-03 11:41:12,630 - octoprint.server.util.flask - INFO - Passively logging in user badgemaker from ::ffff:192.168.1.87 2020-08-03 11:41:12,632 - octoprint.access.users - INFO - Logged in user: badgemaker 2020-08-03 11:41:15,731 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.87 2020-08-03 11:41:15,892 - octoprint.server.util.flask - INFO - Passively logging in user badgemaker from ::ffff:192.168.1.87 2020-08-03 11:41:15,893 - octoprint.access.users - INFO - Logged in user: badgemaker 2020-08-03 11:41:20,822 - octoprint.server.util.sockjs - INFO - User badgemaker logged in on the socket from client ::ffff:192.168.1.87 2020-08-03 11:41:22,051 - tornado.access - WARNING - 404 GET /plugin/octolapse/getSnapshot?file_type=thumbnail&camera_guid=354def78-9eea-409a-ad23-ee966dfff4ba&apikey=&time=1596451289674 (::ffff:192.168.1.87) 4.11ms 2020-08-03 11:41:22,059 - tornado.access - WARNING - 404 GET /plugin/octolapse/getSnapshot?file_type=snapshot&camera_guid=354def78-9eea-409a-ad23-ee966dfff4ba&apikey=&time=1596451289675 (::ffff:192.168.1.87) 2.72ms 2020-08-03 11:43:32,591 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting" 2020-08-03 11:43:32,623 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: 0.4LH_Squares.gcode, owner: badgemaker, user: badgemaker 2020-08-03 11:43:32,696 - octoprint.plugin - ERROR - Error while calling plugin filamentsensorng Traceback (most recent call last): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/plugin/__init__.py", line 230, in call_plugin result = getattr(plugin, method)(*args, **kwargs) File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_filamentsensorng/__init__.py", line 105, in on_event if event is Events.PRINT_STARTED and self.no_filament(): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_filamentsensorng/__init__.py", line 97, in no_filament return GPIO.input(self.pin) != self.switch RuntimeError: Please set pin numbering mode using GPIO.setmode(GPIO.BOARD) or GPIO.setmode(GPIO.BCM) 2020-08-03 11:43:33,227 - octoprint.plugins.tracking - INFO - Sent tracking event print_started, payload: {'origin': u'local', 'file': '6507c70cde8b6c520aafa5667f540f448c425668'} 2020-08-03 11:43:34,672 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Cancelling" 2020-08-03 11:43:34,682 - octoprint.util.comm - INFO - Changing monitoring state from "Cancelling" to "Printing" 2020-08-03 11:43:34,732 - octoprint.printer.standard.job - INFO - Print job cancelled - origin: local, path: 0.4LH_Squares.gcode, owner: badgemaker, user: None 2020-08-03 11:43:34,790 - octoprint.plugins.filamentsensorng - INFO - PrintCancelled: Disabling filament sensor. 2020-08-03 11:43:34,792 - octoprint.plugin - ERROR - Error while calling plugin filamentsensorng Traceback (most recent call last): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/plugin/__init__.py", line 230, in call_plugin result = getattr(plugin, method)(*args, **kwargs) File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_filamentsensorng/__init__.py", line 129, in on_event GPIO.remove_event_detect(self.pin) RuntimeError: Please set pin numbering mode using GPIO.setmode(GPIO.BOARD) or GPIO.setmode(GPIO.BCM) 2020-08-03 11:43:34,950 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Operational" 2020-08-03 11:43:35,016 - octoprint.plugins.filamentmanager - INFO - Filament used: 0.0 mm (tool0) 2020-08-03 11:43:35,025 - octoprint.plugins.filamentmanager - WARNING - No selected spool for tool0 2020-08-03 11:43:35,338 - octoprint.plugins.tracking - INFO - Sent tracking event print_cancelled, payload: {'origin': u'local', 'file': '6507c70cde8b6c520aafa5667f540f448c425668', u'elapsed': 2} 2020-08-03 11:43:35,470 - octoprint.plugins.filamentsensorng - INFO - PrintFailed: Disabling filament sensor. 2020-08-03 11:43:35,472 - octoprint.plugin - ERROR - Error while calling plugin filamentsensorng Traceback (most recent call last): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/plugin/__init__.py", line 230, in call_plugin result = getattr(plugin, method)(*args, **kwargs) File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_filamentsensorng/__init__.py", line 129, in on_event GPIO.remove_event_detect(self.pin) RuntimeError: Please set pin numbering mode using GPIO.setmode(GPIO.BOARD) or GPIO.setmode(GPIO.BCM) 2020-08-03 11:43:35,555 - octoprint.plugins.ikea_tradfri - INFO - Schedule turn off in 30 s 2020-08-03 11:43:35,982 - octoprint.plugins.tracking - INFO - Sent tracking event print_failed, payload: {'origin': u'local', u'reason': u'cancelled', 'file': '6507c70cde8b6c520aafa5667f540f448c425668', u'elapsed': 2} 2020-08-03 11:44:05,579 - octoprint.plugins.ikea_tradfri - INFO - stop 2020-08-03 11:44:05,586 - octoprint.plugins.ikea_tradfri - ERROR - [-] libcoap: could not find libcoap. 2020-08-03 11:44:05,686 - octoprint.plugins.ikea_tradfri - INFO - Settings saved 2020-08-03 11:44:05,688 - octoprint.plugins.ikea_tradfri - INFO - connection_failled 2020-08-03 11:44:05,689 - octoprint.plugins.ikea_tradfri - ERROR - Failed to get psk key (run_gateway_put_request) 2020-08-03 11:44:05,753 - octoprint.plugins.ikea_tradfri - INFO - Settings saved 2020-08-03 11:44:05,755 - octoprint.plugins.ikea_tradfri - INFO - connection_failled 2020-08-03 11:45:15,605 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2020-08-03 11:45:32,929 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 360020} 2020-08-03 11:46:04,042 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2020-08-03 11:46:04,207 - octoprint.plugin.core - INFO - Found 25 plugin(s) providing 26 mixin implementations, 60 hook handlers 2020-08-03 11:46:04,223 - octoprint.plugins.pluginmanager - INFO - Plugin octolapse uninstalled 2020-08-03 11:46:04,226 - octoprint.plugins.pluginmanager - INFO - Cleaning up plugin octolapse... 2020-08-03 11:46:04,522 - octoprint.plugins.tracking - INFO - Sent tracking event uninstall_plugin, payload: {'plugin_version': '0.4.0', 'plugin': 'octolapse'} 2020-08-03 11:46:12,373 - octoprint.server.api.system - INFO - Performing command for core:restart: sudo service octoprint restart 2020-08-03 11:46:12,577 - octoprint.server - INFO - Shutting down... 2020-08-03 11:46:12,947 - octoprint.server - INFO - Calling on_shutdown on plugins 2020-08-03 11:46:12,947 - octoprint.events - INFO - Processing shutdown event, this will be our last event 2020-08-03 11:46:12,954 - octoprint.events - INFO - Event loop shut down 2020-08-03 11:46:13,180 - octoprint.plugins.tracking - INFO - Sent tracking event shutdown, payload: {} 2020-08-03 11:46:13,196 - octoprint.server - INFO - Goodbye! 2020-08-03 11:46:15,193 - octoprint.startup - INFO - ****************************************************************************** 2020-08-03 11:46:15,195 - octoprint.startup - INFO - Starting OctoPrint 1.4.1rc4 2020-08-03 11:46:15,196 - octoprint.startup - INFO - ****************************************************************************** 2020-08-03 11:46:15,798 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity changed from offline to online 2020-08-03 11:46:15,855 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: online 2020-08-03 11:46:15,856 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 8.8.8.8:53 is working 2020-08-03 11:46:15,857 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is working 2020-08-03 11:46:16,078 - octoprint.startup - INFO - Blacklist processing done, adding 1 blacklisted plugin versions: roomtemp (any) 2020-08-03 11:46:16,110 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2020-08-03 11:46:18,122 - octoprint.plugins.errortracking - INFO - Initialized error tracking 2020-08-03 11:46:18,130 - octoprint.plugin.core - INFO - Found 25 plugin(s) providing 25 mixin implementations, 51 hook handlers 2020-08-03 11:46:18,277 - octoprint.server.heartbeat - INFO - Starting server heartbeat, 900.0s interval 2020-08-03 11:46:18,302 - octoprint.server - INFO - Intermediary server started 2020-08-03 11:46:18,303 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2020-08-03 11:46:18,456 - octoprint.plugin.core - INFO - Found 25 plugin(s) providing 25 mixin implementations, 51 hook handlers 2020-08-03 11:46:18,487 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/pi/.octoprint/uploads... 2020-08-03 11:46:19,161 - octoprint.filemanager.storage - INFO - ... file metadata for /home/pi/.octoprint/uploads initialized successfully. 2020-08-03 11:46:19,166 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_SHOW (needs: u"Need(method='role', value=u'plugin_action_command_notification_show')") 2020-08-03 11:46:19,168 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_CLEAR (needs: u"Need(method='role', value=u'plugin_action_command_notification_clear')") 2020-08-03 11:46:19,170 - octoprint.server - INFO - Added new permission from plugin action_command_prompt: PLUGIN_ACTION_COMMAND_PROMPT_INTERACT (needs: u"Need(method='role', value=u'plugin_action_command_prompt_interact')") 2020-08-03 11:46:19,171 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_READ (needs: u"Need(method='role', value=u'plugin_announcements_read')") 2020-08-03 11:46:19,173 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_MANAGE (needs: u"Need(method='role', value=u'plugin_announcements_manage'), Need(method='role', value=u'plugin_announcements_read')") 2020-08-03 11:46:19,174 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_ADMIN (needs: u"Need(method='role', value=u'plugin_appkeys_admin')") 2020-08-03 11:46:19,176 - octoprint.server - INFO - Added new permission from plugin backup: PLUGIN_BACKUP_ACCESS (needs: u"Need(method='role', value=u'plugin_backup_access')") 2020-08-03 11:46:19,178 - octoprint.server - INFO - Added new permission from plugin firmware_check: PLUGIN_FIRMWARE_CHECK_DISPLAY (needs: u"Need(method='role', value=u'plugin_firmware_check_display')") 2020-08-03 11:46:19,179 - octoprint.server - INFO - Added new permission from plugin ikea_tradfri: PLUGIN_IKEA_TRADFRI_ADMIN (needs: u"Need(method='role', value=u'plugin_ikea_tradfri_admins')") 2020-08-03 11:46:19,182 - octoprint.server - INFO - Added new permission from plugin logging: PLUGIN_LOGGING_MANAGE (needs: u"Need(method='role', value=u'plugin_logging_manage')") 2020-08-03 11:46:19,183 - octoprint.server - INFO - Added new permission from plugin pi_support: PLUGIN_PI_SUPPORT_STATUS (needs: u"Need(method='role', value=u'plugin_pi_support_check')") 2020-08-03 11:46:19,186 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_MANAGE (needs: u"Need(method='role', value=u'plugin_pluginmanager_manage')") 2020-08-03 11:46:19,187 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_INSTALL (needs: u"Need(method='role', value=u'plugin_pluginmanager_install'), Need(method='role', value=u'plugin_pluginmanager_manage')") 2020-08-03 11:46:19,189 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CHECK (needs: u"Need(method='role', value=u'plugin_softwareupdate_check')") 2020-08-03 11:46:19,191 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_UPDATE (needs: u"Need(method='role', value=u'plugin_softwareupdate_update')") 2020-08-03 11:46:19,215 - octoprint.printer.standard - INFO - Using print time estimator provided by PrintTimeGenius 2020-08-03 11:46:19,238 - octoprint.plugins.filamentsensorng - INFO - Running RPi.GPIO version '0.7.0' 2020-08-03 11:46:19,412 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk 2020-08-03 11:46:20,533 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python2 -m pip" as command to invoke pip 2020-08-03 11:46:21,559 - octoprint.util.pip - INFO - Version of pip is 19.3.1 2020-08-03 11:46:21,561 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python2.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2020-08-03 11:46:21,562 - octoprint.util.pip - INFO - ==> pip ok -> yes 2020-08-03 11:46:21,567 - octoprint.plugin.core - INFO - Initialized 25 plugin implementation(s) 2020-08-03 11:46:21,583 - py.warnings - WARNING - /home/pi/oprint/local/lib/python2.7/site-packages/octoprint/util/__init__.py:819: UnicodeWarning: Unicode unequal comparison failed to convert both arguments to Unicode - interpreting them as being unequal if value_source != value_target: 2020-08-03 11:46:21,600 - octoprint.plugin.core - INFO - 25 plugin(s) registered with the system: | Access Anywhere - The Spaghetti Detective (1.3.3) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_thespaghettidetective | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/appkeys | Backup & Restore (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/backup | Bed Visualizer (0.1.14) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_bedlevelvisualizer | Core Wizard (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/corewizard | Cost Estimation (2.1.3) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_costestimation | Discovery (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/discovery | Error Tracking (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/errortracking | Filament Manager (0.5.3) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_filamentmanager | Filament Sensor NG (1.0.2) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_filamentsensorng | File Check (2020.7.6) (bundled) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_file_check | Firmware Check (2020.6.22) (bundled) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_firmware_check | GCode Viewer (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/gcodeviewer | Logging (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/logging | Login UI (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/loginui | OctoPrint Ikea Tradfri (1.3.1) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_ikea_tradfri | Pi Support Plugin (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/pluginmanager | PrintTimeGenius Plugin (2.2.5) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_PrintTimeGenius | Software Update (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/softwareupdate | Virtual Printer (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2020-08-03 11:46:21,615 - octoprint.environment - INFO - Detected environment is Python 2.7.16 under Linux (linux2). Details: | hardware: | cores: 4 | freq: 1400.0 | ram: 917016576 | os: | id: linux | platform: linux2 | plugins: | pi_support: | model: Raspberry Pi 3 Model B Plus Rev 1.3 | octopi_version: 0.17.0 | python: | pip: 19.3.1 | version: 2.7.16 | virtualenv: /home/pi/oprint 2020-08-03 11:46:21,631 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/webassets... 2020-08-03 11:46:21,664 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-cache... 2020-08-03 11:46:23,046 - octoprint.server - INFO - Shutting down intermediary server... 2020-08-03 11:46:23,492 - octoprint.server - INFO - Intermediary server shut down 2020-08-03 11:46:23,498 - octoprint.events - INFO - Processing startup event, this is our first event 2020-08-03 11:46:23,501 - octoprint.events - INFO - Adding 1 events to queue that were held back before startup event 2020-08-03 11:46:23,512 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue... 2020-08-03 11:46:23,514 - octoprint.server - INFO - Autoconnect on startup is configured, trying to connect to the printer... 2020-08-03 11:46:23,630 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue 2020-08-03 11:46:23,671 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2020-08-03 11:46:25,316 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2020-08-03 11:46:25,339 - octoprint.server - INFO - Trying to connect to configured serial port None 2020-08-03 11:46:25,390 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2020-08-03 11:46:25,560 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder... 2020-08-03 11:46:25,562 - octoprint.server.util.watchdog - INFO - ... initial scan done. 2020-08-03 11:46:25,635 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on octopi' for _http._tcp 2020-08-03 11:46:25,648 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on octopi' for _octoprint._tcp 2020-08-03 11:46:25,669 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance on octopi for SSDP 2020-08-03 11:46:25,694 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 7 port/baudrate candidates: /dev/ttyUSB0@115200, /dev/ttyUSB0@250000, /dev/ttyUSB0@230400, /dev/ttyUSB0@57600, /dev/ttyUSB0@38400, /dev/ttyUSB0@19200, /dev/ttyUSB0@9600 2020-08-03 11:46:25,697 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200 2020-08-03 11:46:25,702 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200 2020-08-03 11:46:25,719 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2020-08-03 11:46:25,725 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2020-08-03 11:46:25,809 - octoprint.server - INFO - Listening on http://127.0.0.1:5000 2020-08-03 11:46:25,864 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.87 2020-08-03 11:46:26,061 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2020-08-03 11:46:26,068 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Operational" 2020-08-03 11:46:26,192 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2020-08-03 11:46:27,172 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python2 -m pip" as command to invoke pip 2020-08-03 11:46:27,286 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python2.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2020-08-03 11:46:27,407 - octoprint.util.pip - INFO - ==> pip ok -> yes 2020-08-03 11:46:27,498 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 54.0GB. That is considered sufficient for updating. 2020-08-03 11:46:28,144 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2020-08-03 11:46:28,188 - octoprint.plugins.bedlevelvisualizer - INFO - OctoPrint-BedLevelVisualizer loaded! 2020-08-03 11:46:28,221 - octoprint.plugins.filamentsensorng - INFO - FilamentSensor-ng started 2020-08-03 11:46:28,224 - octoprint.plugins.filamentsensorng - INFO - Pin not configured, won't work unless configured! 2020-08-03 11:46:28,227 - octoprint.plugins.ikea_tradfri - INFO - No security code or gateway ip 2020-08-03 11:46:28,404 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.87 2020-08-03 11:46:28,465 - octoprint.plugins.ikea_tradfri - INFO - Settings saved 2020-08-03 11:46:28,467 - octoprint.plugins.ikea_tradfri - INFO - waiting 2020-08-03 11:46:28,541 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 11} 2020-08-03 11:46:28,829 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'query_string': 'l10n=en', 'path': '/', 'base_url': 'http://192.168.1.85/'} 2020-08-03 11:46:28,850 - octoprint.plugins.tracking - INFO - Sent tracking event pong, payload: {'python': '2.7.16', 'ram': 917016576, u'octopi_version': u'0.17.0', 'version': u'1.4.1rc4', u'plugins': u'ikea_tradfri:1.3.1,costestimation:2.1.3,filamentsensorng:1.0.2,bedlevelvisualizer:0.1.14,thespaghettidetective:1.3.3,filamentmanager:0.5.3,printtimegenius:2.2.5', 'pip': '19.3.1', 'cores': 4, 'freq': 1400.0, u'pi_model': u'Raspberry Pi 3 Model B Plus Rev 1.3', 'os': 'linux'} 2020-08-03 11:46:29,130 - octoprint.plugins.tracking - INFO - Sent tracking event startup, payload: {'python': '2.7.16', 'ram': 917016576, u'octopi_version': u'0.17.0', 'version': u'1.4.1rc4', 'pip': '19.3.1', 'cores': 4, 'freq': 1400.0, u'pi_model': u'Raspberry Pi 3 Model B Plus Rev 1.3', 'os': 'linux'} 2020-08-03 11:46:29,137 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin Creality 3D" 2020-08-03 11:46:29,184 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting 2020-08-03 11:46:29,710 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {u'printer_baudrate': 0, u'printer_port': None, 'firmware_name': u'Marlin Creality 3D'} 2020-08-03 11:46:29,983 - octoprint.server.util.flask - INFO - Passively logging in user badgemaker from ::ffff:192.168.1.87 2020-08-03 11:46:29,986 - octoprint.access.users - INFO - Logged in user: badgemaker 2020-08-03 11:46:30,100 - octoprint.server.util.sockjs - WARNING - Unknown user/session combo: badgemaker:321B66985F06488090D60B5B0E567E35 2020-08-03 11:46:30,112 - octoprint.server.util.sockjs - INFO - User badgemaker logged in on the socket from client ::ffff:192.168.1.87 2020-08-03 11:46:30,564 - octoprint.plugins.thespaghettidetective - INFO - User account: {u'is_pro': False} 2020-08-03 11:46:31,152 - tornado.access - WARNING - 404 POST /plugin/octolapse/loadSettingsAndState (::ffff:192.168.1.87) 45.53ms 2020-08-03 11:46:33,348 - octoprint.server.util.flask - INFO - Passively logging in user badgemaker from ::ffff:192.168.1.87 2020-08-03 11:46:33,349 - octoprint.access.users - INFO - Logged in user: badgemaker 2020-08-03 11:46:50,878 - octoprint.server.preemptive_cache - INFO - ... done in 22.05s 2020-08-03 11:46:51,249 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.87 2020-08-03 11:46:55,036 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.87 2020-08-03 11:46:55,171 - octoprint.server.util.flask - INFO - Passively logging in user badgemaker from ::ffff:192.168.1.87 2020-08-03 11:46:55,173 - octoprint.access.users - INFO - Logged in user: badgemaker 2020-08-03 11:47:00,123 - octoprint.server.util.sockjs - INFO - User badgemaker logged in on the socket from client ::ffff:192.168.1.87 2020-08-03 11:47:18,115 - octoprint.printer.standard.job - INFO - Print job selected - origin: local, path: 0.4LH_Squares.gcode, owner: badgemaker, user: badgemaker 2020-08-03 11:47:18,191 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting" 2020-08-03 11:47:18,205 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: 0.4LH_Squares.gcode, owner: badgemaker, user: badgemaker 2020-08-03 11:47:18,245 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2020-08-03 11:47:18,261 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Printing" 2020-08-03 11:47:18,267 - octoprint.plugin - ERROR - Error while calling plugin filamentsensorng Traceback (most recent call last): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/plugin/__init__.py", line 230, in call_plugin result = getattr(plugin, method)(*args, **kwargs) File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_filamentsensorng/__init__.py", line 105, in on_event if event is Events.PRINT_STARTED and self.no_filament(): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_filamentsensorng/__init__.py", line 97, in no_filament return GPIO.input(self.pin) != self.switch RuntimeError: Please set pin numbering mode using GPIO.setmode(GPIO.BOARD) or GPIO.setmode(GPIO.BCM) 2020-08-03 11:47:18,519 - octoprint.plugins.tracking - INFO - Sent tracking event print_started, payload: {'origin': u'local', 'file': '6507c70cde8b6c520aafa5667f540f448c425668'} 2020-08-03 11:47:19,093 - backoff - INFO - Backing off capture_jpeg(...) for 0.6s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:47:19,696 - backoff - INFO - Backing off capture_jpeg(...) for 0.5s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:47:20,166 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:47:20,495 - octoprint.util.comm - INFO - Printer seems to support the busy protocol, will adjust timeouts and set busy interval accordingly 2020-08-03 11:47:29,333 - backoff - INFO - Backing off capture_jpeg(...) for 0.3s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:47:29,690 - backoff - INFO - Backing off capture_jpeg(...) for 0.4s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:47:30,134 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:47:38,408 - octoprint.util.comm - INFO - Telling the printer to set the busy interval to our "communicationBusy" timeout - 1s = 2s 2020-08-03 11:47:40,279 - backoff - INFO - Backing off capture_jpeg(...) for 0.8s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:47:41,104 - backoff - INFO - Backing off capture_jpeg(...) for 0.5s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:47:41,602 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:47:50,750 - backoff - INFO - Backing off capture_jpeg(...) for 0.3s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:47:51,024 - backoff - INFO - Backing off capture_jpeg(...) for 1.8s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:47:52,839 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:48:00,990 - backoff - INFO - Backing off capture_jpeg(...) for 0.6s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:48:01,558 - backoff - INFO - Backing off capture_jpeg(...) for 1.7s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:48:03,321 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:48:11,478 - backoff - INFO - Backing off capture_jpeg(...) for 0.5s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:48:11,990 - backoff - INFO - Backing off capture_jpeg(...) for 0.1s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:48:12,119 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:48:22,269 - backoff - INFO - Backing off capture_jpeg(...) for 0.5s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:48:22,794 - backoff - INFO - Backing off capture_jpeg(...) for 0.0s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:48:22,830 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:48:33,007 - backoff - INFO - Backing off capture_jpeg(...) for 0.7s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:48:33,752 - backoff - INFO - Backing off capture_jpeg(...) for 1.1s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:48:34,868 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:48:43,039 - backoff - INFO - Backing off capture_jpeg(...) for 0.9s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:48:43,950 - backoff - INFO - Backing off capture_jpeg(...) for 1.2s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:48:45,149 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:48:53,308 - backoff - INFO - Backing off capture_jpeg(...) for 0.9s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:48:54,198 - backoff - INFO - Backing off capture_jpeg(...) for 1.1s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:48:55,390 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:49:03,575 - backoff - INFO - Backing off capture_jpeg(...) for 0.3s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:49:03,931 - backoff - INFO - Backing off capture_jpeg(...) for 0.2s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:49:04,130 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:49:14,343 - backoff - INFO - Backing off capture_jpeg(...) for 0.4s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:49:14,811 - backoff - INFO - Backing off capture_jpeg(...) for 1.5s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:49:16,348 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:49:24,569 - backoff - INFO - Backing off capture_jpeg(...) for 0.8s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:49:25,415 - backoff - INFO - Backing off capture_jpeg(...) for 0.7s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:49:26,144 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:49:35,306 - backoff - INFO - Backing off capture_jpeg(...) for 0.4s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:49:35,767 - backoff - INFO - Backing off capture_jpeg(...) for 1.2s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:49:36,993 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:49:46,189 - backoff - INFO - Backing off capture_jpeg(...) for 0.7s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:49:46,908 - backoff - INFO - Backing off capture_jpeg(...) for 1.6s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:49:48,567 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:49:56,756 - backoff - INFO - Backing off capture_jpeg(...) for 0.4s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:49:57,139 - backoff - INFO - Backing off capture_jpeg(...) for 1.5s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:49:58,618 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:50:06,797 - backoff - INFO - Backing off capture_jpeg(...) for 0.5s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:50:07,313 - backoff - INFO - Backing off capture_jpeg(...) for 1.8s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:50:09,104 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:50:17,287 - backoff - INFO - Backing off capture_jpeg(...) for 1.0s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:50:18,284 - backoff - INFO - Backing off capture_jpeg(...) for 1.7s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:50:20,011 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:50:28,142 - backoff - INFO - Backing off capture_jpeg(...) for 0.6s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:50:28,798 - backoff - INFO - Backing off capture_jpeg(...) for 1.6s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:50:30,406 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:50:38,589 - backoff - INFO - Backing off capture_jpeg(...) for 0.5s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:50:39,068 - backoff - INFO - Backing off capture_jpeg(...) for 1.5s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:50:40,611 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:50:48,788 - backoff - INFO - Backing off capture_jpeg(...) for 0.6s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:50:49,372 - backoff - INFO - Backing off capture_jpeg(...) for 0.9s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:50:50,242 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:50:59,456 - backoff - INFO - Backing off capture_jpeg(...) for 0.8s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:51:00,285 - backoff - INFO - Backing off capture_jpeg(...) for 1.4s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:51:01,733 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:51:09,919 - backoff - INFO - Backing off capture_jpeg(...) for 0.5s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:51:10,475 - backoff - INFO - Backing off capture_jpeg(...) for 1.1s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:51:11,576 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:51:20,792 - backoff - INFO - Backing off capture_jpeg(...) for 0.4s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:51:21,183 - backoff - INFO - Backing off capture_jpeg(...) for 1.8s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:51:23,024 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:51:31,193 - backoff - INFO - Backing off capture_jpeg(...) for 0.9s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:51:32,120 - backoff - INFO - Backing off capture_jpeg(...) for 0.1s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:51:32,195 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:51:41,354 - backoff - INFO - Backing off capture_jpeg(...) for 0.1s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:51:41,429 - backoff - INFO - Backing off capture_jpeg(...) for 1.4s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:51:42,817 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:51:52,013 - backoff - INFO - Backing off capture_jpeg(...) for 0.4s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:51:52,413 - backoff - INFO - Backing off capture_jpeg(...) for 0.4s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:51:52,802 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:52:03,002 - backoff - INFO - Backing off capture_jpeg(...) for 0.9s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:52:03,890 - backoff - INFO - Backing off capture_jpeg(...) for 1.0s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:52:04,957 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:52:13,108 - backoff - INFO - Backing off capture_jpeg(...) for 0.1s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:52:13,266 - backoff - INFO - Backing off capture_jpeg(...) for 0.3s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:52:13,622 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:52:23,824 - backoff - INFO - Backing off capture_jpeg(...) for 0.6s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:52:24,417 - backoff - INFO - Backing off capture_jpeg(...) for 0.2s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:52:24,589 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:52:34,790 - backoff - INFO - Backing off capture_jpeg(...) for 0.1s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:52:34,869 - backoff - INFO - Backing off capture_jpeg(...) for 1.6s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:52:36,525 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:52:45,686 - backoff - INFO - Backing off capture_jpeg(...) for 1.0s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:52:46,659 - backoff - INFO - Backing off capture_jpeg(...) for 1.5s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:52:48,198 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:52:56,361 - backoff - INFO - Backing off capture_jpeg(...) for 1.0s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:52:57,346 - backoff - INFO - Backing off capture_jpeg(...) for 1.2s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:52:58,571 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:53:06,736 - backoff - INFO - Backing off capture_jpeg(...) for 1.0s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:53:07,709 - backoff - INFO - Backing off capture_jpeg(...) for 0.7s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:53:08,449 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:53:17,618 - backoff - INFO - Backing off capture_jpeg(...) for 0.2s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:53:17,791 - backoff - INFO - Backing off capture_jpeg(...) for 0.3s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:53:18,095 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:53:28,298 - backoff - INFO - Backing off capture_jpeg(...) for 1.0s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:53:29,300 - backoff - INFO - Backing off capture_jpeg(...) for 1.8s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:53:31,161 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:53:38,335 - backoff - INFO - Backing off capture_jpeg(...) for 0.6s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:53:38,942 - backoff - INFO - Backing off capture_jpeg(...) for 0.4s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:53:39,415 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:53:48,587 - backoff - INFO - Backing off capture_jpeg(...) for 0.4s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:53:48,986 - backoff - INFO - Backing off capture_jpeg(...) for 0.1s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:53:49,105 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:53:59,277 - backoff - INFO - Backing off capture_jpeg(...) for 0.7s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:54:00,031 - backoff - INFO - Backing off capture_jpeg(...) for 1.6s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:54:01,658 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:54:09,864 - backoff - INFO - Backing off capture_jpeg(...) for 0.2s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:54:10,096 - backoff - INFO - Backing off capture_jpeg(...) for 1.1s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:54:11,218 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:54:20,362 - backoff - INFO - Backing off capture_jpeg(...) for 0.3s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:54:20,709 - backoff - INFO - Backing off capture_jpeg(...) for 0.3s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:54:21,048 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:54:31,227 - backoff - INFO - Backing off capture_jpeg(...) for 0.6s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:54:31,867 - backoff - INFO - Backing off capture_jpeg(...) for 0.3s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:54:32,176 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:54:41,441 - backoff - INFO - Backing off capture_jpeg(...) for 0.9s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:54:42,402 - backoff - INFO - Backing off capture_jpeg(...) for 1.9s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:54:44,299 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:54:51,462 - backoff - INFO - Backing off capture_jpeg(...) for 0.3s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:54:51,755 - backoff - INFO - Backing off capture_jpeg(...) for 1.6s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:54:53,354 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:55:01,654 - backoff - INFO - Backing off capture_jpeg(...) for 0.2s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:55:01,889 - backoff - INFO - Backing off capture_jpeg(...) for 0.2s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:55:02,071 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:55:12,257 - backoff - INFO - Backing off capture_jpeg(...) for 0.0s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:55:12,303 - backoff - INFO - Backing off capture_jpeg(...) for 0.7s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:55:13,044 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:55:23,212 - backoff - INFO - Backing off capture_jpeg(...) for 0.3s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:55:23,490 - backoff - INFO - Backing off capture_jpeg(...) for 1.2s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:55:24,731 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:55:33,893 - backoff - INFO - Backing off capture_jpeg(...) for 0.4s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:55:34,279 - backoff - INFO - Backing off capture_jpeg(...) for 0.8s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:55:35,121 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:55:44,322 - backoff - INFO - Backing off capture_jpeg(...) for 0.9s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:55:45,278 - backoff - INFO - Backing off capture_jpeg(...) for 1.0s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:55:46,329 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:55:54,519 - backoff - INFO - Backing off capture_jpeg(...) for 0.3s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:55:54,813 - backoff - INFO - Backing off capture_jpeg(...) for 2.0s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:55:56,831 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:56:05,015 - backoff - INFO - Backing off capture_jpeg(...) for 0.1s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:56:05,154 - backoff - INFO - Backing off capture_jpeg(...) for 1.7s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:56:06,841 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:56:16,021 - backoff - INFO - Backing off capture_jpeg(...) for 0.4s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:56:16,438 - backoff - INFO - Backing off capture_jpeg(...) for 1.2s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:56:17,615 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:56:26,752 - backoff - INFO - Backing off capture_jpeg(...) for 0.9s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:56:27,670 - backoff - INFO - Backing off capture_jpeg(...) for 0.6s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:56:28,300 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:56:37,497 - backoff - INFO - Backing off capture_jpeg(...) for 1.0s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:56:38,508 - backoff - INFO - Backing off capture_jpeg(...) for 2.0s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:56:40,506 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:56:47,697 - backoff - INFO - Backing off capture_jpeg(...) for 0.3s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:56:47,997 - backoff - INFO - Backing off capture_jpeg(...) for 1.4s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:56:49,444 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:56:58,605 - backoff - INFO - Backing off capture_jpeg(...) for 0.4s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:56:59,038 - backoff - INFO - Backing off capture_jpeg(...) for 0.4s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:56:59,482 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:57:08,690 - backoff - INFO - Backing off capture_jpeg(...) for 0.4s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:57:09,152 - backoff - INFO - Backing off capture_jpeg(...) for 1.9s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:57:11,087 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:57:19,241 - backoff - INFO - Backing off capture_jpeg(...) for 0.9s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:57:20,166 - backoff - INFO - Backing off capture_jpeg(...) for 1.7s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:57:21,871 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:57:30,063 - backoff - INFO - Backing off capture_jpeg(...) for 0.2s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:57:30,274 - backoff - INFO - Backing off capture_jpeg(...) for 0.7s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:57:31,019 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:57:40,226 - backoff - INFO - Backing off capture_jpeg(...) for 0.7s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:57:40,926 - backoff - INFO - Backing off capture_jpeg(...) for 0.5s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:57:41,447 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:57:50,702 - backoff - INFO - Backing off capture_jpeg(...) for 0.1s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:57:50,782 - backoff - INFO - Backing off capture_jpeg(...) for 0.3s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:57:51,061 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:58:01,227 - backoff - INFO - Backing off capture_jpeg(...) for 0.1s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:58:01,420 - backoff - INFO - Backing off capture_jpeg(...) for 1.7s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:58:03,144 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:58:11,325 - backoff - INFO - Backing off capture_jpeg(...) for 0.9s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:58:12,266 - backoff - INFO - Backing off capture_jpeg(...) for 1.6s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:58:13,932 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:58:22,087 - backoff - INFO - Backing off capture_jpeg(...) for 0.3s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:58:22,417 - backoff - INFO - Backing off capture_jpeg(...) for 1.6s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:58:24,085 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:58:32,256 - backoff - INFO - Backing off capture_jpeg(...) for 0.0s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:58:32,311 - backoff - INFO - Backing off capture_jpeg(...) for 0.2s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:58:32,570 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:58:42,750 - backoff - INFO - Backing off capture_jpeg(...) for 0.1s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:58:42,873 - backoff - INFO - Backing off capture_jpeg(...) for 0.3s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:58:43,224 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:58:53,455 - backoff - INFO - Backing off capture_jpeg(...) for 0.6s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:58:54,058 - backoff - INFO - Backing off capture_jpeg(...) for 0.1s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:58:54,210 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:59:04,430 - backoff - INFO - Backing off capture_jpeg(...) for 0.5s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:59:04,967 - backoff - INFO - Backing off capture_jpeg(...) for 0.9s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:59:05,866 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:59:15,063 - backoff - INFO - Backing off capture_jpeg(...) for 0.8s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:59:15,893 - backoff - INFO - Backing off capture_jpeg(...) for 1.5s (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:59:17,424 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused',))) 2020-08-03 11:59:21,892 - octoprint.util.comm - INFO - Finished in 723.701 s. 2020-08-03 11:59:21,896 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Finishing" 2020-08-03 11:59:21,910 - octoprint.plugins.filamentmanager - INFO - Filament used: 1221.45857 mm (tool0) 2020-08-03 11:59:21,928 - octoprint.printer.standard.job - INFO - Print job done - origin: local, path: 0.4LH_Squares.gcode, owner: badgemaker 2020-08-03 11:59:21,937 - octoprint.plugins.filamentmanager - WARNING - No selected spool for tool0 2020-08-03 11:59:22,058 - octoprint.util.comm - INFO - Changing monitoring state from "Finishing" to "Operational" 2020-08-03 11:59:22,611 - octoprint.plugins.tracking - INFO - Sent tracking event print_done, payload: {'origin': u'local', 'file': '6507c70cde8b6c520aafa5667f540f448c425668', u'elapsed': 723} 2020-08-03 11:59:22,689 - octoprint.plugins.filamentsensorng - INFO - PrintDone: Disabling filament sensor. 2020-08-03 11:59:22,692 - octoprint.plugin - ERROR - Error while calling plugin filamentsensorng Traceback (most recent call last): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/plugin/__init__.py", line 230, in call_plugin result = getattr(plugin, method)(*args, **kwargs) File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_filamentsensorng/__init__.py", line 129, in on_event GPIO.remove_event_detect(self.pin) RuntimeError: Please set pin numbering mode using GPIO.setmode(GPIO.BOARD) or GPIO.setmode(GPIO.BCM) 2020-08-03 11:59:22,735 - octoprint.plugins.ikea_tradfri - INFO - Schedule turn off in 30 s 2020-08-03 11:20:26,590 - octoprint.startup - INFO - ****************************************************************************** 2020-08-03 11:20:26,592 - octoprint.startup - INFO - Starting OctoPrint 1.4.1rc4 2020-08-03 11:20:26,593 - octoprint.startup - INFO - ****************************************************************************** 2020-08-03 11:20:27,336 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: offline 2020-08-03 11:20:27,337 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 8.8.8.8:53 is not working 2020-08-03 11:20:27,337 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is not working 2020-08-03 11:20:27,344 - octoprint.startup - INFO - We don't appear to be online, not fetching plugin blacklist 2020-08-03 11:20:27,407 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2020-08-03 11:20:30,755 - octoprint.plugins.errortracking - INFO - Initialized error tracking 2020-08-03 11:20:30,764 - octoprint.plugin.core - INFO - Found 25 plugin(s) providing 25 mixin implementations, 51 hook handlers 2020-08-03 11:20:30,968 - octoprint.server.heartbeat - INFO - Starting server heartbeat, 900.0s interval 2020-08-03 11:20:31,017 - octoprint.server - INFO - Intermediary server started 2020-08-03 11:20:31,019 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2020-08-03 11:20:31,165 - octoprint.plugin.core - INFO - Found 25 plugin(s) providing 25 mixin implementations, 51 hook handlers 2020-08-03 11:20:31,197 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/pi/.octoprint/uploads... 2020-08-03 11:20:31,879 - octoprint.filemanager.storage - INFO - ... file metadata for /home/pi/.octoprint/uploads initialized successfully. 2020-08-03 11:20:31,883 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_SHOW (needs: u"Need(method='role', value=u'plugin_action_command_notification_show')") 2020-08-03 11:20:31,885 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_CLEAR (needs: u"Need(method='role', value=u'plugin_action_command_notification_clear')") 2020-08-03 11:20:31,886 - octoprint.server - INFO - Added new permission from plugin action_command_prompt: PLUGIN_ACTION_COMMAND_PROMPT_INTERACT (needs: u"Need(method='role', value=u'plugin_action_command_prompt_interact')") 2020-08-03 11:20:31,887 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_READ (needs: u"Need(method='role', value=u'plugin_announcements_read')") 2020-08-03 11:20:31,889 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_MANAGE (needs: u"Need(method='role', value=u'plugin_announcements_manage'), Need(method='role', value=u'plugin_announcements_read')") 2020-08-03 11:20:31,890 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_ADMIN (needs: u"Need(method='role', value=u'plugin_appkeys_admin')") 2020-08-03 11:20:31,892 - octoprint.server - INFO - Added new permission from plugin backup: PLUGIN_BACKUP_ACCESS (needs: u"Need(method='role', value=u'plugin_backup_access')") 2020-08-03 11:20:31,894 - octoprint.server - INFO - Added new permission from plugin firmware_check: PLUGIN_FIRMWARE_CHECK_DISPLAY (needs: u"Need(method='role', value=u'plugin_firmware_check_display')") 2020-08-03 11:20:31,896 - octoprint.server - INFO - Added new permission from plugin ikea_tradfri: PLUGIN_IKEA_TRADFRI_ADMIN (needs: u"Need(method='role', value=u'plugin_ikea_tradfri_admins')") 2020-08-03 11:20:31,897 - octoprint.server - INFO - Added new permission from plugin logging: PLUGIN_LOGGING_MANAGE (needs: u"Need(method='role', value=u'plugin_logging_manage')") 2020-08-03 11:20:31,899 - octoprint.server - INFO - Added new permission from plugin pi_support: PLUGIN_PI_SUPPORT_STATUS (needs: u"Need(method='role', value=u'plugin_pi_support_check')") 2020-08-03 11:20:31,901 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_MANAGE (needs: u"Need(method='role', value=u'plugin_pluginmanager_manage')") 2020-08-03 11:20:31,903 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_INSTALL (needs: u"Need(method='role', value=u'plugin_pluginmanager_install'), Need(method='role', value=u'plugin_pluginmanager_manage')") 2020-08-03 11:20:31,905 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CHECK (needs: u"Need(method='role', value=u'plugin_softwareupdate_check')") 2020-08-03 11:20:31,907 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_UPDATE (needs: u"Need(method='role', value=u'plugin_softwareupdate_update')") 2020-08-03 11:20:31,929 - octoprint.printer.standard - INFO - Using print time estimator provided by PrintTimeGenius 2020-08-03 11:20:31,947 - octoprint.plugins.filamentsensorng - INFO - Running RPi.GPIO version '0.7.0' 2020-08-03 11:20:32,107 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk 2020-08-03 11:20:33,421 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python2 -m pip" as command to invoke pip 2020-08-03 11:20:34,437 - octoprint.util.pip - INFO - Version of pip is 19.3.1 2020-08-03 11:20:34,439 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python2.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2020-08-03 11:20:34,440 - octoprint.util.pip - INFO - ==> pip ok -> yes 2020-08-03 11:20:34,444 - octoprint.plugin.core - INFO - Initialized 25 plugin implementation(s) 2020-08-03 11:20:34,463 - py.warnings - WARNING - /home/pi/oprint/local/lib/python2.7/site-packages/octoprint/util/__init__.py:819: UnicodeWarning: Unicode unequal comparison failed to convert both arguments to Unicode - interpreting them as being unequal if value_source != value_target: 2020-08-03 11:20:34,480 - octoprint.plugin.core - INFO - 25 plugin(s) registered with the system: | Access Anywhere - The Spaghetti Detective (1.3.3) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_thespaghettidetective | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/appkeys | Backup & Restore (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/backup | Bed Visualizer (0.1.14) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_bedlevelvisualizer | Core Wizard (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/corewizard | Cost Estimation (2.1.3) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_costestimation | Discovery (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/discovery | Error Tracking (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/errortracking | Filament Manager (0.5.3) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_filamentmanager | Filament Sensor NG (1.0.2) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_filamentsensorng | File Check (2020.7.6) (bundled) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_file_check | Firmware Check (2020.6.22) (bundled) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_firmware_check | GCode Viewer (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/gcodeviewer | Logging (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/logging | Login UI (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/loginui | OctoPrint Ikea Tradfri (1.3.1) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_ikea_tradfri | Pi Support Plugin (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/pluginmanager | PrintTimeGenius Plugin (2.2.5) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_PrintTimeGenius | Software Update (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/softwareupdate | Virtual Printer (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2020-08-03 11:20:34,497 - octoprint.environment - INFO - Detected environment is Python 2.7.16 under Linux (linux2). Details: | hardware: | cores: 4 | freq: 1400.0 | ram: 917016576 | os: | id: linux | platform: linux2 | plugins: | pi_support: | model: Raspberry Pi 3 Model B Plus Rev 1.3 | octopi_version: 0.17.0 | python: | pip: 19.3.1 | version: 2.7.16 | virtualenv: /home/pi/oprint 2020-08-03 11:20:34,508 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/webassets... 2020-08-03 11:20:34,529 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-cache... 2020-08-03 11:20:36,193 - octoprint.server - INFO - Shutting down intermediary server... 2020-08-03 11:20:36,196 - octoprint.server - INFO - Intermediary server shut down 2020-08-03 11:20:36,200 - octoprint.events - INFO - Processing startup event, this is our first event 2020-08-03 11:20:36,202 - octoprint.events - INFO - Adding 0 events to queue that were held back before startup event 2020-08-03 11:20:36,206 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue... 2020-08-03 11:20:36,208 - octoprint.server - INFO - Autoconnect on startup is configured, trying to connect to the printer... 2020-08-03 11:20:36,214 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue 2020-08-03 11:20:36,267 - octoprint.server - INFO - Trying to connect to configured serial port None 2020-08-03 11:20:36,321 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2020-08-03 11:20:36,371 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder... 2020-08-03 11:20:36,573 - octoprint.server.util.watchdog - INFO - ... initial scan done. 2020-08-03 11:20:36,593 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on octopi' for _http._tcp 2020-08-03 11:20:36,603 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 7 port/baudrate candidates: /dev/ttyUSB0@115200, /dev/ttyUSB0@250000, /dev/ttyUSB0@230400, /dev/ttyUSB0@57600, /dev/ttyUSB0@38400, /dev/ttyUSB0@19200, /dev/ttyUSB0@9600 2020-08-03 11:20:36,604 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200 2020-08-03 11:20:36,607 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200 2020-08-03 11:20:36,610 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on octopi' for _octoprint._tcp 2020-08-03 11:20:36,630 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance on octopi for SSDP 2020-08-03 11:20:36,683 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2020-08-03 11:20:36,692 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2020-08-03 11:20:36,708 - octoprint.server - INFO - Listening on http://127.0.0.1:5000 2020-08-03 11:20:36,781 - octoprint.plugins.pluginmanager - INFO - Looks like we are offline, can't fetch repository from network 2020-08-03 11:20:36,784 - octoprint.plugins.pluginmanager - INFO - Looks like we are offline, can't fetch notices from network 2020-08-03 11:20:36,914 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Operational" 2020-08-03 11:20:36,956 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2020-08-03 11:20:37,995 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python2 -m pip" as command to invoke pip 2020-08-03 11:20:37,997 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python2.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2020-08-03 11:20:37,998 - octoprint.util.pip - INFO - ==> pip ok -> yes 2020-08-03 11:20:38,007 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 54.0GB. That is considered sufficient for updating. 2020-08-03 11:20:38,052 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity changed from offline to online 2020-08-03 11:20:38,626 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from https://plugins.octoprint.org/plugins.json 2020-08-03 11:20:40,150 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin Creality 3D" 2020-08-03 11:20:40,176 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting 2020-08-03 11:20:40,562 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python2 -m pip" as command to invoke pip 2020-08-03 11:20:40,665 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python2 -m pip" as command to invoke pip 2020-08-03 11:20:40,888 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python2 -m pip" as command to invoke pip 2020-08-03 11:20:41,044 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python2 -m pip" as command to invoke pip 2020-08-03 11:20:41,094 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {u'printer_baudrate': 0, u'printer_port': None, 'firmware_name': u'Marlin Creality 3D'} 2020-08-03 11:20:41,193 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python2 -m pip" as command to invoke pip 2020-08-03 11:20:42,255 - octoprint.plugins.pluginmanager - INFO - Loaded plugin notices data from https://plugins.octoprint.org/notices.json 2020-08-03 11:20:44,798 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python2.7/site-packages/ (writable -> yes), --user flag needed -> no, virtual env -> yes 2020-08-03 11:20:44,799 - octoprint.util.pip - INFO - ==> pip ok -> yes 2020-08-03 11:20:45,465 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk 2020-08-03 11:20:45,483 - octoprint.plugins.bedlevelvisualizer - INFO - OctoPrint-BedLevelVisualizer loaded! 2020-08-03 11:20:45,498 - octoprint.plugins.filamentsensorng - INFO - FilamentSensor-ng started 2020-08-03 11:20:45,499 - octoprint.plugins.filamentsensorng - INFO - Pin not configured, won't work unless configured! 2020-08-03 11:20:45,502 - octoprint.plugins.ikea_tradfri - INFO - No security code or gateway ip 2020-08-03 11:20:45,653 - octoprint.plugins.ikea_tradfri - INFO - Settings saved 2020-08-03 11:20:45,654 - octoprint.plugins.ikea_tradfri - INFO - waiting 2020-08-03 11:20:45,736 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 17} 2020-08-03 11:20:45,960 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'query_string': 'l10n=en', 'path': '/', 'base_url': 'http://192.168.1.85/'} 2020-08-03 11:20:46,106 - octoprint.plugins.tracking - INFO - Sent tracking event pong, payload: {'python': '2.7.16', 'ram': 917016576, u'octopi_version': u'0.17.0', 'version': u'1.4.1rc4', u'plugins': u'ikea_tradfri:1.3.1,costestimation:2.1.3,filamentsensorng:1.0.2,bedlevelvisualizer:0.1.14,thespaghettidetective:1.3.3,filamentmanager:0.5.3,printtimegenius:2.2.5', 'pip': '19.3.1', 'cores': 4, 'freq': 1400.0, u'pi_model': u'Raspberry Pi 3 Model B Plus Rev 1.3', 'os': 'linux'} 2020-08-03 11:20:46,511 - octoprint.plugins.thespaghettidetective - INFO - User account: {u'is_pro': False} 2020-08-03 11:20:47,058 - octoprint.plugins.tracking - INFO - Sent tracking event startup, payload: {'python': '2.7.16', 'ram': 917016576, u'octopi_version': u'0.17.0', 'version': u'1.4.1rc4', 'pip': '19.3.1', 'cores': 4, 'freq': 1400.0, u'pi_model': u'Raspberry Pi 3 Model B Plus Rev 1.3', 'os': 'linux'} 2020-08-03 11:20:52,276 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.87 2020-08-03 11:20:52,393 - octoprint.server.util.flask - INFO - Passively logging in user badgemaker from ::ffff:192.168.1.87 2020-08-03 11:20:52,396 - octoprint.access.users - INFO - Logged in user: badgemaker 2020-08-03 11:20:52,456 - octoprint.server.util.sockjs - INFO - User badgemaker logged in on the socket from client ::ffff:192.168.1.87 2020-08-03 12:01:01,549 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2020-08-03 12:01:01,876 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 24} 2020-08-03 12:01:09,293 - octoprint.server.preemptive_cache - INFO - ... done in 14.71s 2020-08-03 12:03:36,261 - octoprint.server.util.flask - INFO - Passively logging in user badgemaker from ::ffff:192.168.1.87 2020-08-03 12:03:36,265 - octoprint.access.users - INFO - Logged in user: badgemaker 2020-08-03 12:03:36,461 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.87 2020-08-03 12:03:40,213 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.87 2020-08-03 12:03:40,281 - octoprint.server.util.flask - INFO - Passively logging in user badgemaker from ::ffff:192.168.1.87 2020-08-03 12:03:40,283 - octoprint.access.users - INFO - Logged in user: badgemaker 2020-08-03 12:03:43,590 - octoprint.server.util.sockjs - INFO - User badgemaker logged in on the socket from client ::ffff:192.168.1.87 2020-08-03 12:06:21,916 - octoprint.filemanager.analysis - INFO - Starting analysis of local:CE3PRO_lettershunt.gcode 2020-08-03 12:06:23,258 - octoprint.filemanager.analysis - INFO - Analysis of entry local:CE3PRO_lettershunt.gcode finished, needed 1.34s 2020-08-03 12:06:32,974 - octoprint.printer.standard.job - INFO - Print job selected - origin: local, path: CE3PRO_lettershunt.gcode, owner: badgemaker, user: badgemaker 2020-08-03 12:06:33,063 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting" 2020-08-03 12:06:33,071 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: CE3PRO_lettershunt.gcode, owner: badgemaker, user: badgemaker 2020-08-03 12:06:33,087 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2020-08-03 12:06:33,128 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Printing" 2020-08-03 12:06:33,145 - octoprint.plugin - ERROR - Error while calling plugin filamentsensorng Traceback (most recent call last): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/plugin/__init__.py", line 230, in call_plugin result = getattr(plugin, method)(*args, **kwargs) File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_filamentsensorng/__init__.py", line 105, in on_event if event is Events.PRINT_STARTED and self.no_filament(): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_filamentsensorng/__init__.py", line 97, in no_filament return GPIO.input(self.pin) != self.switch RuntimeError: Please set pin numbering mode using GPIO.setmode(GPIO.BOARD) or GPIO.setmode(GPIO.BCM) 2020-08-03 12:06:33,376 - octoprint.plugins.tracking - INFO - Sent tracking event print_started, payload: {'origin': u'local', 'file': '64b1b4c7cf228456158e9aa49b93fc36cee52b6f'} 2020-08-03 12:06:35,282 - octoprint.util.comm - INFO - Printer seems to support the busy protocol, will adjust timeouts and set busy interval accordingly 2020-08-03 12:07:54,956 - octoprint.util.comm - INFO - Telling the printer to set the busy interval to our "communicationBusy" timeout - 1s = 2s 2020-08-03 12:13:24,108 - octoprint.util.comm - INFO - Finished in 411.046 s. 2020-08-03 12:13:24,113 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Finishing" 2020-08-03 12:13:24,127 - octoprint.plugins.filamentmanager - INFO - Filament used: 79.73401 mm (tool0) 2020-08-03 12:13:24,152 - octoprint.printer.standard.job - INFO - Print job done - origin: local, path: CE3PRO_lettershunt.gcode, owner: badgemaker 2020-08-03 12:13:24,163 - octoprint.plugins.filamentmanager - WARNING - No selected spool for tool0 2020-08-03 12:13:24,220 - octoprint.util.comm - INFO - Changing monitoring state from "Finishing" to "Operational" 2020-08-03 12:13:24,847 - octoprint.plugins.filamentsensorng - INFO - PrintDone: Disabling filament sensor. 2020-08-03 12:13:24,850 - octoprint.plugin - ERROR - Error while calling plugin filamentsensorng Traceback (most recent call last): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/plugin/__init__.py", line 230, in call_plugin result = getattr(plugin, method)(*args, **kwargs) File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_filamentsensorng/__init__.py", line 129, in on_event GPIO.remove_event_detect(self.pin) RuntimeError: Please set pin numbering mode using GPIO.setmode(GPIO.BOARD) or GPIO.setmode(GPIO.BCM) 2020-08-03 12:13:24,898 - octoprint.plugins.ikea_tradfri - INFO - Schedule turn off in 30 s 2020-08-03 12:13:24,944 - octoprint.plugins.tracking - INFO - Sent tracking event print_done, payload: {'origin': u'local', 'file': '64b1b4c7cf228456158e9aa49b93fc36cee52b6f', u'elapsed': 411} 2020-08-03 12:13:54,904 - octoprint.plugins.ikea_tradfri - INFO - stop 2020-08-03 12:13:54,912 - octoprint.plugins.ikea_tradfri - ERROR - [-] libcoap: could not find libcoap. 2020-08-03 12:13:55,155 - octoprint.plugins.ikea_tradfri - INFO - Settings saved 2020-08-03 12:13:55,156 - octoprint.plugins.ikea_tradfri - INFO - connection_failled 2020-08-03 12:13:55,157 - octoprint.plugins.ikea_tradfri - ERROR - Failed to get psk key (run_gateway_put_request) 2020-08-03 12:13:55,206 - octoprint.plugins.ikea_tradfri - INFO - Settings saved 2020-08-03 12:13:55,207 - octoprint.plugins.ikea_tradfri - INFO - connection_failled 2020-08-03 12:16:01,552 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2020-08-03 12:16:01,854 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 924} 2020-08-03 12:24:27,437 - octoprint.filemanager.analysis - INFO - Starting analysis of local:CE3PRO_Wedding_dress_Cookie_Cutter20.gcode 2020-08-03 12:24:28,878 - octoprint.filemanager.analysis - INFO - Analysis of entry local:CE3PRO_Wedding_dress_Cookie_Cutter20.gcode finished, needed 1.44s 2020-08-03 12:24:37,644 - octoprint.printer.standard.job - INFO - Print job selected - origin: local, path: CE3PRO_Wedding_dress_Cookie_Cutter20.gcode, owner: badgemaker, user: badgemaker 2020-08-03 12:24:37,712 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting" 2020-08-03 12:24:37,727 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: CE3PRO_Wedding_dress_Cookie_Cutter20.gcode, owner: badgemaker, user: badgemaker 2020-08-03 12:24:37,738 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2020-08-03 12:24:37,774 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Printing" 2020-08-03 12:24:37,795 - octoprint.plugin - ERROR - Error while calling plugin filamentsensorng Traceback (most recent call last): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/plugin/__init__.py", line 230, in call_plugin result = getattr(plugin, method)(*args, **kwargs) File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_filamentsensorng/__init__.py", line 105, in on_event if event is Events.PRINT_STARTED and self.no_filament(): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_filamentsensorng/__init__.py", line 97, in no_filament return GPIO.input(self.pin) != self.switch RuntimeError: Please set pin numbering mode using GPIO.setmode(GPIO.BOARD) or GPIO.setmode(GPIO.BCM) 2020-08-03 12:24:38,222 - octoprint.plugins.tracking - INFO - Sent tracking event print_started, payload: {'origin': u'local', 'file': 'c99ff02dc4e3755b97db7cd906900cffc24d3ad4'} 2020-08-03 12:31:01,556 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2020-08-03 12:31:02,126 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 1824} 2020-08-03 12:32:30,453 - octoprint.util.comm - INFO - Finished in 472.741 s. 2020-08-03 12:32:30,455 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Finishing" 2020-08-03 12:32:30,471 - octoprint.plugins.filamentmanager - INFO - Filament used: 142.38232 mm (tool0) 2020-08-03 12:32:30,489 - octoprint.plugins.filamentmanager - WARNING - No selected spool for tool0 2020-08-03 12:32:30,524 - octoprint.printer.standard.job - INFO - Print job done - origin: local, path: CE3PRO_Wedding_dress_Cookie_Cutter20.gcode, owner: badgemaker 2020-08-03 12:32:30,572 - octoprint.util.comm - INFO - Changing monitoring state from "Finishing" to "Operational" 2020-08-03 12:32:31,184 - octoprint.plugins.tracking - INFO - Sent tracking event print_done, payload: {'origin': u'local', 'file': 'c99ff02dc4e3755b97db7cd906900cffc24d3ad4', u'elapsed': 472} 2020-08-03 12:32:31,197 - octoprint.plugins.filamentsensorng - INFO - PrintDone: Disabling filament sensor. 2020-08-03 12:32:31,200 - octoprint.plugin - ERROR - Error while calling plugin filamentsensorng Traceback (most recent call last): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/plugin/__init__.py", line 230, in call_plugin result = getattr(plugin, method)(*args, **kwargs) File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_filamentsensorng/__init__.py", line 129, in on_event GPIO.remove_event_detect(self.pin) RuntimeError: Please set pin numbering mode using GPIO.setmode(GPIO.BOARD) or GPIO.setmode(GPIO.BCM) 2020-08-03 12:32:31,246 - octoprint.plugins.ikea_tradfri - INFO - Schedule turn off in 30 s 2020-08-03 12:33:01,249 - octoprint.plugins.ikea_tradfri - INFO - stop 2020-08-03 12:33:01,256 - octoprint.plugins.ikea_tradfri - ERROR - [-] libcoap: could not find libcoap. 2020-08-03 12:33:01,362 - octoprint.plugins.ikea_tradfri - INFO - Settings saved 2020-08-03 12:33:01,364 - octoprint.plugins.ikea_tradfri - INFO - connection_failled 2020-08-03 12:33:01,366 - octoprint.plugins.ikea_tradfri - ERROR - Failed to get psk key (run_gateway_put_request) 2020-08-03 12:33:01,417 - octoprint.plugins.ikea_tradfri - INFO - Settings saved 2020-08-03 12:33:01,435 - octoprint.plugins.ikea_tradfri - INFO - connection_failled 2020-08-03 12:43:31,821 - octoprint.filemanager.analysis - INFO - Starting analysis of local:CE3PRO_rings20.gcode 2020-08-03 12:43:34,279 - octoprint.filemanager.analysis - INFO - Analysis of entry local:CE3PRO_rings20.gcode finished, needed 2.46s 2020-08-03 12:43:39,391 - octoprint.printer.standard.job - INFO - Print job selected - origin: local, path: CE3PRO_rings20.gcode, owner: badgemaker, user: badgemaker 2020-08-03 12:43:39,776 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting" 2020-08-03 12:43:39,790 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: CE3PRO_rings20.gcode, owner: badgemaker, user: badgemaker 2020-08-03 12:43:39,810 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2020-08-03 12:43:39,842 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Printing" 2020-08-03 12:43:39,857 - octoprint.plugin - ERROR - Error while calling plugin filamentsensorng Traceback (most recent call last): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/plugin/__init__.py", line 230, in call_plugin result = getattr(plugin, method)(*args, **kwargs) File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_filamentsensorng/__init__.py", line 105, in on_event if event is Events.PRINT_STARTED and self.no_filament(): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_filamentsensorng/__init__.py", line 97, in no_filament return GPIO.input(self.pin) != self.switch RuntimeError: Please set pin numbering mode using GPIO.setmode(GPIO.BOARD) or GPIO.setmode(GPIO.BCM) 2020-08-03 12:43:40,504 - octoprint.plugins.tracking - INFO - Sent tracking event print_started, payload: {'origin': u'local', 'file': '3cb9aaf47b2247fcfb31c664d1fa7119f8719af1'} 2020-08-03 12:46:01,562 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2020-08-03 12:46:01,780 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 2724} 2020-08-03 13:01:01,569 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2020-08-03 13:01:01,868 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 3624} 2020-08-03 13:16:01,579 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2020-08-03 13:16:01,838 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 4524} 2020-08-03 13:20:08,613 - octoprint.util.comm - INFO - Finished in 2188.837 s. 2020-08-03 13:20:08,617 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Finishing" 2020-08-03 13:20:08,633 - octoprint.plugins.filamentmanager - INFO - Filament used: 465.4209 mm (tool0) 2020-08-03 13:20:08,650 - octoprint.plugins.filamentmanager - WARNING - No selected spool for tool0 2020-08-03 13:20:08,673 - octoprint.printer.standard.job - INFO - Print job done - origin: local, path: CE3PRO_rings20.gcode, owner: badgemaker 2020-08-03 13:20:08,807 - octoprint.util.comm - INFO - Changing monitoring state from "Finishing" to "Operational" 2020-08-03 13:20:09,324 - octoprint.plugins.filamentsensorng - INFO - PrintDone: Disabling filament sensor. 2020-08-03 13:20:09,327 - octoprint.plugin - ERROR - Error while calling plugin filamentsensorng Traceback (most recent call last): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/plugin/__init__.py", line 230, in call_plugin result = getattr(plugin, method)(*args, **kwargs) File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_filamentsensorng/__init__.py", line 129, in on_event GPIO.remove_event_detect(self.pin) RuntimeError: Please set pin numbering mode using GPIO.setmode(GPIO.BOARD) or GPIO.setmode(GPIO.BCM) 2020-08-03 13:20:09,380 - octoprint.plugins.ikea_tradfri - INFO - Schedule turn off in 30 s 2020-08-03 13:20:09,463 - octoprint.plugins.tracking - INFO - Sent tracking event print_done, payload: {'origin': u'local', 'file': '3cb9aaf47b2247fcfb31c664d1fa7119f8719af1', u'elapsed': 2188} 2020-08-03 13:20:39,385 - octoprint.plugins.ikea_tradfri - INFO - stop 2020-08-03 13:20:39,393 - octoprint.plugins.ikea_tradfri - ERROR - [-] libcoap: could not find libcoap. 2020-08-03 13:20:39,481 - octoprint.plugins.ikea_tradfri - INFO - Settings saved 2020-08-03 13:20:39,483 - octoprint.plugins.ikea_tradfri - INFO - connection_failled 2020-08-03 13:20:39,485 - octoprint.plugins.ikea_tradfri - ERROR - Failed to get psk key (run_gateway_put_request) 2020-08-03 13:20:39,534 - octoprint.plugins.ikea_tradfri - INFO - Settings saved 2020-08-03 13:20:39,536 - octoprint.plugins.ikea_tradfri - INFO - connection_failled 2020-08-03 13:29:42,668 - octoprint.filemanager.analysis - INFO - Starting analysis of local:CE3PRO_Headdress_-William_Morris_Lodden_Tiara_by_Billie_Ruben20.gcode 2020-08-03 13:29:44,080 - octoprint.filemanager.analysis - INFO - Analysis of entry local:CE3PRO_Headdress_-William_Morris_Lodden_Tiara_by_Billie_Ruben20.gcode finished, needed 1.41s 2020-08-03 13:29:47,142 - octoprint.printer.standard.job - INFO - Print job selected - origin: local, path: CE3PRO_Headdress_-William_Morris_Lodden_Tiara_by_Billie_Ruben20.gcode, owner: badgemaker, user: badgemaker 2020-08-03 13:29:47,212 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting" 2020-08-03 13:29:47,223 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: CE3PRO_Headdress_-William_Morris_Lodden_Tiara_by_Billie_Ruben20.gcode, owner: badgemaker, user: badgemaker 2020-08-03 13:29:47,243 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2020-08-03 13:29:47,268 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Printing" 2020-08-03 13:29:47,299 - octoprint.plugin - ERROR - Error while calling plugin filamentsensorng Traceback (most recent call last): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/plugin/__init__.py", line 230, in call_plugin result = getattr(plugin, method)(*args, **kwargs) File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_filamentsensorng/__init__.py", line 105, in on_event if event is Events.PRINT_STARTED and self.no_filament(): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_filamentsensorng/__init__.py", line 97, in no_filament return GPIO.input(self.pin) != self.switch RuntimeError: Please set pin numbering mode using GPIO.setmode(GPIO.BOARD) or GPIO.setmode(GPIO.BCM) 2020-08-03 13:29:48,701 - octoprint.plugins.tracking - INFO - Sent tracking event print_started, payload: {'origin': u'local', 'file': 'e938af2700ce912d281519a36362069035c7d904'} 2020-08-03 13:31:01,611 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2020-08-03 13:31:01,900 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 5424} 2020-08-03 13:39:15,479 - octoprint.util.comm - INFO - Finished in 568.268 s. 2020-08-03 13:39:15,484 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Finishing" 2020-08-03 13:39:15,500 - octoprint.plugins.filamentmanager - INFO - Filament used: 73.19082 mm (tool0) 2020-08-03 13:39:15,516 - octoprint.plugins.filamentmanager - WARNING - No selected spool for tool0 2020-08-03 13:39:15,547 - octoprint.printer.standard.job - INFO - Print job done - origin: local, path: CE3PRO_Headdress_-William_Morris_Lodden_Tiara_by_Billie_Ruben20.gcode, owner: badgemaker 2020-08-03 13:39:15,719 - octoprint.util.comm - INFO - Changing monitoring state from "Finishing" to "Operational" 2020-08-03 13:39:16,230 - octoprint.plugins.filamentsensorng - INFO - PrintDone: Disabling filament sensor. 2020-08-03 13:39:16,233 - octoprint.plugin - ERROR - Error while calling plugin filamentsensorng Traceback (most recent call last): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/plugin/__init__.py", line 230, in call_plugin result = getattr(plugin, method)(*args, **kwargs) File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_filamentsensorng/__init__.py", line 129, in on_event GPIO.remove_event_detect(self.pin) RuntimeError: Please set pin numbering mode using GPIO.setmode(GPIO.BOARD) or GPIO.setmode(GPIO.BCM) 2020-08-03 13:39:16,289 - octoprint.plugins.ikea_tradfri - INFO - Schedule turn off in 30 s 2020-08-03 13:39:16,302 - octoprint.plugins.tracking - INFO - Sent tracking event print_done, payload: {'origin': u'local', 'file': 'e938af2700ce912d281519a36362069035c7d904', u'elapsed': 568} 2020-08-03 13:39:46,373 - octoprint.plugins.ikea_tradfri - INFO - stop 2020-08-03 13:39:46,383 - octoprint.plugins.ikea_tradfri - ERROR - [-] libcoap: could not find libcoap. 2020-08-03 13:39:46,441 - octoprint.plugins.ikea_tradfri - INFO - Settings saved 2020-08-03 13:39:46,443 - octoprint.plugins.ikea_tradfri - INFO - connection_failled 2020-08-03 13:39:46,444 - octoprint.plugins.ikea_tradfri - ERROR - Failed to get psk key (run_gateway_put_request) 2020-08-03 13:39:46,497 - octoprint.plugins.ikea_tradfri - INFO - Settings saved 2020-08-03 13:39:46,499 - octoprint.plugins.ikea_tradfri - INFO - connection_failled 2020-08-03 13:46:01,623 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2020-08-03 13:46:01,917 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 6324}