Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:13:23 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:13:25 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:13:27 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:13:29 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:13:32 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:13:34 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:13:36 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:13:38 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:13:41 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:13:43 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:13:45 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:13:47 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:13:50 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:13:52 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:13:54 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:13:56 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:13:59 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:14:01 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:14:03 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:14:05 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:14:08 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:14:10 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:14:12 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:14:14 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:14:17 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:14:19 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:14:21 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:14:23 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:14:26 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:14:28 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:14:30 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:14:32 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:14:35 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:14:37 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:14:39 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:14:41 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:14:44 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:14:46 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:14:48 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:14:50 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:14:53 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:14:55 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:14:57 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:14:59 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:15:02 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:15:04 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:15:06 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:15:08 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:15:11 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:15:13 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:15:15 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:15:17 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:15:20 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:15:22 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:15:24 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:15:26 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:15:29 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:15:31 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:15:33 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:15:35 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:15:38 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:15:40 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:15:42 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:15:44 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:15:47 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:15:49 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:15:51 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:15:53 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:15:56 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:15:58 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:16:00 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:16:02 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:16:05 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:16:07 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:16:09 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:16:11 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:16:14 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:16:16 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:16:18 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:16:20 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:16:23 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:16:25 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:16:27 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:16:29 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:16:32 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:16:34 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:16:36 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:16:38 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:16:41 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:16:43 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:16:45 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:16:47 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:16:50 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:16:52 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:16:54 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:16:56 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:16:59 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:17:01 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:17:03 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:17:05 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:17:08 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:17:10 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:17:12 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:17:14 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:17:17 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:17:19 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:17:21 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:17:23 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:17:26 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:17:28 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:17:30 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:17:32 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:17:35 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:17:37 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:17:39 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:17:41 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:17:44 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:17:46 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:17:48 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:17:50 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:17:53 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:17:55 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:17:57 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:17:59 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:18:02 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:18:04 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:18:06 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:18:08 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:18:11 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:18:13 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:18:15 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:18:17 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:18:20 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:18:22 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:18:24 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:18:26 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:18:29 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:18:31 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:18:33 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:18:35 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:18:38 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:18:40 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:18:42 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:18:44 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:18:47 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:18:49 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:18:51 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:18:53 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:18:56 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:18:58 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:19:00 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:19:02 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:19:05 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:19:07 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:19:09 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:19:11 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:19:14 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:19:16 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:19:18 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:19:20 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:19:23 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:19:25 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:19:27 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:19:29 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:19:32 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:19:34 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:19:36 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:19:38 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:19:41 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:19:43 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:19:45 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:19:47 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:19:50 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:19:52 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:19:54 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:19:56 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:19:59 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:20:01 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:20:03 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:20:05 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:20:08 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:20:10 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:20:12 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:20:14 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:20:17 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:20:19 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:20:21 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:20:23 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:20:26 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:20:28 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:20:30 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:20:32 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:20:35 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:20:37 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:20:39 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:20:41 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:20:44 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:20:46 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:20:48 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:20:50 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:20:53 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:20:55 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:20:57 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:20:59 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:21:02 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:21:04 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Jun 27 20:21:06 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed