2020-04-23 14:12:20,309 - Connecting to: /dev/ttyUSB0
2020-04-23 14:12:20,329 - Changing monitoring state from "Offline" to "Opening serial port"
2020-04-23 14:12:20,335 - Connected to: Serial<id=0x69dd1fb0, open=True>(port='/dev/ttyUSB0', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=10.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
2020-04-23 14:12:20,336 - Changing monitoring state from "Opening serial port" to "Connecting"
2020-04-23 14:12:20,354 - Send: N0 M110 N0*125
2020-04-23 14:12:22,144 - Recv: start
2020-04-23 14:12:22,160 - Recv: echo:EcubMaker 1.2.5-ToyDIY
2020-04-23 14:12:22,162 - Send: N0 M110 N0*125
2020-04-23 14:12:22,166 - Recv: echo: Last Updated: 2018-12-19 11:16 | Author: (none, default config)
2020-04-23 14:12:22,169 - Recv: Compiled: Dec 17 2019
2020-04-23 14:12:22,172 - Recv: echo: Free Memory: 3398  PlannerBufferBytes: 1232
2020-04-23 14:12:22,175 - Recv: echo:V24 stored settings retrieved (412 bytes)
2020-04-23 14:12:22,178 - Recv: echo:Steps per unit:
2020-04-23 14:12:22,180 - Recv: echo:  M92 X80.00 Y80.00 Z400.00 E92.00
2020-04-23 14:12:22,182 - Recv: echo:Maximum feedrates (mm/s):
2020-04-23 14:12:22,186 - Recv: echo:  M203 X300.00 Y300.00 Z30.00 E100.00
2020-04-23 14:12:22,188 - Recv: echo:Maximum Acceleration (mm/s2):
2020-04-23 14:12:22,191 - Recv: echo:  M201 X400 Y400 Z400 E1000
2020-04-23 14:12:22,194 - Recv: echo:Accelerations: P=printing, R=retract and T=travel
2020-04-23 14:12:22,197 - Recv: echo:  M204 P400.00 R400.00 T400.00
2020-04-23 14:12:22,202 - Recv: echo:Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum XY jerk (mm/s),  Z=maximum Z jerk (mm/s),  E=maximum E jerk (mm/s)
2020-04-23 14:12:22,208 - Recv: echo:  M205 S0.00 T0.00 B20000 X20.00 Z5.00 E5.00
2020-04-23 14:12:22,211 - Recv: echo:Home offset (mm)
2020-04-23 14:12:22,214 - Recv: echo:  M206 X0.00 Y0.00 Z0.00
2020-04-23 14:12:22,217 - Recv: echo:Material heatup parameters:
2020-04-23 14:12:22,220 - Recv: echo:  M145 S0 H200 B110 F255
2020-04-23 14:12:22,222 - Recv: echo:  M145 S1 H200 B50 F0
2020-04-23 14:12:22,224 - Recv: echo:PID settings:
2020-04-23 14:12:22,227 - Recv: echo:  M301 P16.74 I1.23 D56.78
2020-04-23 14:12:22,230 - Recv: echo:LCD Contrast:
2020-04-23 14:12:22,232 - Recv: echo:  M250 C120
2020-04-23 14:12:22,236 - Recv: echo:Filament settings: Disabled
2020-04-23 14:12:22,239 - Recv: echo:  M200 D3.00
2020-04-23 14:12:22,241 - Recv: echo:  M200 T1 D3.00
2020-04-23 14:12:22,243 - Recv: echo:  M200 D0
2020-04-23 14:12:22,244 - Recv: echo:Z-Probe Offset (mm):
2020-04-23 14:12:22,246 - Recv: echo:  M851 Z-0.50
2020-04-23 14:12:26,063 - Recv: echo:SD card ok
2020-04-23 14:12:26,176 - Recv: ok N0 P15 B3echo:SD card ok
2020-04-23 14:12:26,185 - Send: N0 M110 N0*125
2020-04-23 14:12:26,187 - Changing monitoring state from "Connecting" to "Operational"
2020-04-23 14:12:56,363 - Communication timeout while idle, trying to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
2020-04-23 14:12:56,377 - Send: N0 M110 N0*125
2020-04-23 14:13:26,416 - Communication timeout while idle, trying to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
2020-04-23 14:13:26,425 - Send: N1 M115*39
2020-04-23 14:13:26,448 - Recv: ok N0 P15 B3ok N0 P15 B3FIRMWARE_NAME:Marlin 1.2.5-ToyDIY (Github) SOURCE_CODE_URL:https://github.com/MarlinFirmware/Marlin PROTOCOL_VERSION:1.0 MACHINE_TYPE: EcubMaker TOYDIY      EXTRUDER_COUNT:2 UUID:cede2a2f-41a2-4748-9b12-c55c62f367ff
2020-04-23 14:13:26,480 - Send: N2 M20*19
2020-04-23 14:13:26,488 - Recv: ok N1 P15 B3Begin file list
2020-04-23 14:13:26,493 - Send: N3 M105*36
2020-04-23 14:13:26,496 - Recv: DRAGON~1.GCO
2020-04-23 14:13:26,498 - Recv: FLEXIR~1.GCO
2020-04-23 14:13:26,500 - Recv: SUNGLA~1.GCO
2020-04-23 14:13:26,503 - Recv: CARACO~1.GCO
2020-04-23 14:13:26,505 - Recv: CAT~1.GCO
2020-04-23 14:13:26,508 - Recv: HIPOPO~1.GCO
2020-04-23 14:13:26,509 - Recv: BUSTPL~1.GCO
2020-04-23 14:13:26,512 - Recv: GANCHO~1.GCO
2020-04-23 14:13:26,513 - Recv: FDM-3D~1.GCO
2020-04-23 14:13:26,516 - Recv: BULBAS~1.GCO
2020-04-23 14:13:26,521 - Recv: 2MMBUL~1.GCO
2020-04-23 14:13:26,526 - Recv: BULBAS~4.GCO
2020-04-23 14:13:26,529 - Recv: 2MMLIN~1.GCO
2020-04-23 14:13:26,532 - Recv: QUICKT~1.GCO
2020-04-23 14:13:26,535 - Recv: TEST1~1.GCO
2020-04-23 14:13:26,537 - Recv: PARTTE~1.GCO
2020-04-23 14:13:26,540 - Recv: PARTTE~2.GCO
2020-04-23 14:13:26,542 - Recv: End file list
2020-04-23 14:13:56,583 - Communication timeout while idle, trying to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
2020-04-23 14:13:56,591 - Send: N4 M105*35
2020-04-23 14:14:26,632 - Communication timeout while idle, trying to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
2020-04-23 14:14:26,641 - Send: N5 M105*34
2020-04-23 14:14:56,682 - No response from printer after 3 consecutive communication timeouts, considering it dead. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
2020-04-23 14:14:56,720 - Changing monitoring state from "Operational" to "Offline (Error: Too many consecutive timeouts, printer still connected and alive?)"
2020-04-23 14:14:56,735 - Connection closed, closing down monitor