2022-01-18 11:01:33,116 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2022-01-18 11:01:33,123 - octoprint.server - INFO - --- Log roll over detected --------------------------------------------------- 2022-01-18 11:01:33,123 - octoprint.server - INFO - OctoPrint 1.7.2 2022-01-18 11:01:33,125 - octoprint.plugin.core - INFO - 18 plugin(s) registered with the system: | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/appkeys | Backup & Restore (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/backup | Core Wizard (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/corewizard | Discovery (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/discovery | Error Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/errortracking | Event Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/eventmanager | File Check (2021.2.23) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_file_check | Firmware Check (2021.10.11) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmware_check | GCode Viewer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/gcodeviewer | Logging (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/logging | Pi Support Plugin (2021.10.28) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/pluginmanager | Software Update (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/softwareupdate | Virtual Printer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2022-01-18 11:01:33,135 - octoprint.environment - INFO - Detected environment is Python 3.9.2 under Linux (linux). Details: | hardware: | cores: 4 | freq: 1800.0 | ram: 1909063680 | os: | bits: 32 | id: linux | platform: linux | plugins: | pi_support: | model: Raspberry Pi 4 Model B Rev 1.5 | octopi_version: 1.0.0 | throttle_state: '0x0' | python: | pip: 21.3.1 | version: 3.9.2 | virtualenv: /home/pi/oprint 2022-01-18 11:01:33,136 - octoprint.server - INFO - ------------------------------------------------------------------------------ 2022-01-18 11:03:43,262 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json 2022-01-18 11:03:45,098 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2022-01-18 11:03:45,100 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-01-18 11:03:45,101 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-01-18 11:03:45,248 - octoprint.server.util.flask.PreemptiveCache - INFO - Adding entry for / and {'path': '/', 'base_url': 'http://192.168.1.76/', 'query_string': 'l10n=en', '_timestamp': 1642503825.2479594, '_count': 1} 2022-01-18 11:03:50,497 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.71 2022-01-18 11:06:37,583 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 11:06:37,585 - octoprint.server.api - INFO - Actively logging in user pi from ::ffff:192.168.1.71 2022-01-18 11:06:37,717 - octoprint.server.util.sockjs - INFO - User pi logged in on the socket from client ::ffff:192.168.1.71 2022-01-18 11:06:38,049 - octoprint.plugins.announcements - INFO - Loaded channel _important from https://octoprint.org/feeds/important.xml in 0.16s 2022-01-18 11:06:38,302 - octoprint.plugins.announcements - INFO - Loaded channel _releases from https://octoprint.org/feeds/releases.xml in 0.15s 2022-01-18 11:06:38,555 - octoprint.plugins.announcements - INFO - Loaded channel _blog from https://octoprint.org/feeds/octoblog.xml in 0.15s 2022-01-18 11:06:38,786 - octoprint.plugins.announcements - INFO - Loaded channel _plugins from https://plugins.octoprint.org/feed.xml in 0.16s 2022-01-18 11:06:39,030 - octoprint.plugins.announcements - INFO - Loaded channel _octopi from https://octoprint.org/feeds/octopi.xml in 0.16s 2022-01-18 11:06:39,558 - octoprint.plugins.pluginmanager - INFO - Loaded plugin notices data from https://plugins.octoprint.org/notices.json 2022-01-18 11:06:39,779 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk 2022-01-18 11:16:33,118 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2022-01-18 11:23:24,909 - octoprint.server.api.system - INFO - Performing command for core:restart: sudo service octoprint restart 2022-01-18 11:23:27,093 - octoprint.startup - INFO - ****************************************************************************** 2022-01-18 11:23:27,095 - octoprint.startup - INFO - Starting OctoPrint 1.7.2 2022-01-18 11:23:27,095 - octoprint.startup - INFO - ****************************************************************************** 2022-01-18 11:23:27,352 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity changed from offline to online 2022-01-18 11:23:27,442 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: online 2022-01-18 11:23:27,442 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 8.8.8.8:53 is working 2022-01-18 11:23:27,442 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is working 2022-01-18 11:23:27,613 - octoprint.startup - INFO - Blacklist processing done, adding 3 blacklisted plugin versions: roomtemp (any), GcodeEditor (>=0.1.1,<=0.2.8), gcodeleveling (>=0.1.0,<=0.1.1) 2022-01-18 11:23:27,614 - octoprint.plugin.core - WARNING - Invalid version requirement >=0.1.1,<=0.2.8 for blacklist entry GcodeEditor, ignoring 2022-01-18 11:23:27,614 - octoprint.plugin.core - WARNING - Invalid version requirement >=0.1.0,<=0.1.1 for blacklist entry gcodeleveling, ignoring 2022-01-18 11:23:27,640 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2022-01-18 11:23:28,436 - octoprint.plugin.core - INFO - Found 18 plugin(s) providing 18 mixin implementations, 38 hook handlers 2022-01-18 11:23:28,499 - octoprint.server.heartbeat - INFO - Starting server heartbeat, 900.0s interval 2022-01-18 11:23:28,515 - octoprint.server - INFO - Intermediary server started 2022-01-18 11:23:28,528 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/pi/.octoprint/uploads... 2022-01-18 11:23:28,529 - octoprint.filemanager.storage - INFO - ... file metadata for /home/pi/.octoprint/uploads initialized successfully. 2022-01-18 11:23:28,532 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_SHOW (needs: "Need(method='role', value='plugin_action_command_notification_show')") 2022-01-18 11:23:28,532 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_CLEAR (needs: "Need(method='role', value='plugin_action_command_notification_clear')") 2022-01-18 11:23:28,532 - octoprint.server - INFO - Added new permission from plugin action_command_prompt: PLUGIN_ACTION_COMMAND_PROMPT_INTERACT (needs: "Need(method='role', value='plugin_action_command_prompt_interact')") 2022-01-18 11:23:28,532 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_READ (needs: "Need(method='role', value='plugin_announcements_read')") 2022-01-18 11:23:28,533 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_MANAGE (needs: "Need(method='role', value='plugin_announcements_manage'), Need(method='role', value='plugin_announcements_read')") 2022-01-18 11:23:28,533 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_ADMIN (needs: "Need(method='role', value='plugin_appkeys_admin')") 2022-01-18 11:23:28,533 - octoprint.server - INFO - Added new permission from plugin backup: PLUGIN_BACKUP_ACCESS (needs: "Need(method='role', value='plugin_backup_access')") 2022-01-18 11:23:28,533 - octoprint.server - INFO - Added new permission from plugin firmware_check: PLUGIN_FIRMWARE_CHECK_DISPLAY (needs: "Need(method='role', value='plugin_firmware_check_display')") 2022-01-18 11:23:28,534 - octoprint.server - INFO - Added new permission from plugin logging: PLUGIN_LOGGING_MANAGE (needs: "Need(method='role', value='plugin_logging_manage')") 2022-01-18 11:23:28,534 - octoprint.server - INFO - Added new permission from plugin pi_support: PLUGIN_PI_SUPPORT_STATUS (needs: "Need(method='role', value='plugin_pi_support_check')") 2022-01-18 11:23:28,534 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_MANAGE (needs: "Need(method='role', value='plugin_pluginmanager_manage')") 2022-01-18 11:23:28,535 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_INSTALL (needs: "Need(method='role', value='plugin_pluginmanager_install'), Need(method='role', value='plugin_pluginmanager_manage')") 2022-01-18 11:23:28,535 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CHECK (needs: "Need(method='role', value='plugin_softwareupdate_check')") 2022-01-18 11:23:28,535 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_UPDATE (needs: "Need(method='role', value='plugin_softwareupdate_update')") 2022-01-18 11:23:28,535 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CONFIGURE (needs: "Need(method='role', value='plugin_softwareupdate_configure')") 2022-01-18 11:23:29,272 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2022-01-18 11:23:29,984 - octoprint.util.pip - INFO - Version of pip is 21.3.1 2022-01-18 11:23:29,985 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-01-18 11:23:30,026 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-01-18 11:23:30,060 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk 2022-01-18 11:23:30,100 - octoprint.plugin.core - INFO - Initialized 18 plugin implementation(s) 2022-01-18 11:23:30,105 - octoprint.plugin.core - INFO - 18 plugin(s) registered with the system: | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/appkeys | Backup & Restore (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/backup | Core Wizard (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/corewizard | Discovery (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/discovery | Error Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/errortracking | Event Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/eventmanager | File Check (2021.2.23) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_file_check | Firmware Check (2021.10.11) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmware_check | GCode Viewer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/gcodeviewer | Logging (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/logging | Pi Support Plugin (2021.10.28) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/pluginmanager | Software Update (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/softwareupdate | Virtual Printer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2022-01-18 11:23:30,127 - octoprint.environment - INFO - Detected environment is Python 3.9.2 under Linux (linux). Details: | hardware: | cores: 4 | freq: 1800.0 | ram: 1909063680 | os: | bits: 32 | id: linux | platform: linux | plugins: | pi_support: | model: Raspberry Pi 4 Model B Rev 1.5 | octopi_version: 1.0.0 | throttle_state: '0x0' | python: | pip: 21.3.1 | version: 3.9.2 | virtualenv: /home/pi/oprint 2022-01-18 11:23:30,135 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/webassets... 2022-01-18 11:23:30,150 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-cache... 2022-01-18 11:23:30,520 - octoprint.server - INFO - Shutting down intermediary server... 2022-01-18 11:23:30,874 - octoprint.server - INFO - Intermediary server shut down 2022-01-18 11:23:30,875 - octoprint.events - INFO - Processing startup event, this is our first event 2022-01-18 11:23:30,876 - octoprint.events - INFO - Adding 2 events to queue that were held back before startup event 2022-01-18 11:23:30,876 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue... 2022-01-18 11:23:30,898 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json 2022-01-18 11:23:30,908 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue 2022-01-18 11:23:30,915 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder... 2022-01-18 11:23:30,921 - octoprint.server.util.watchdog - INFO - ... initial scan done. 2022-01-18 11:23:31,084 - octoprint.plugins.tracking - INFO - Sent tracking event system_unthrottled, payload: {'throttled_now': False, 'throttled_past': False, 'throttled_mask': 0, 'throttled_voltage_now': False, 'throttled_voltage_past': False, 'throttled_overheat_now': False, 'throttled_overheat_past': False} 2022-01-18 11:23:31,163 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from https://plugins.octoprint.org/plugins.json 2022-01-18 11:23:31,869 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on raspberrypi._http._tcp.local.' for _http._tcp.local. 2022-01-18 11:23:31,963 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2022-01-18 11:23:32,690 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on raspberrypi._octoprint._tcp.local.' for _octoprint._tcp.local. 2022-01-18 11:23:32,714 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance on raspberrypi for SSDP 2022-01-18 11:23:32,735 - octoprint.server - INFO - Listening on http://127.0.0.1:5000 2022-01-18 11:23:32,828 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2022-01-18 11:23:32,872 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.71 2022-01-18 11:23:33,275 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 11:23:33,276 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 11:23:33,646 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2022-01-18 11:23:33,652 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-01-18 11:23:33,652 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-01-18 11:23:33,750 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 11.8GB. That is considered sufficient for updating. 2022-01-18 11:23:33,918 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2022-01-18 11:23:34,030 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'http://192.168.1.76/', 'path': '/', 'query_string': 'l10n=en'} 2022-01-18 11:23:34,179 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 5, 'printer_state': 'OFFLINE'} 2022-01-18 11:23:34,406 - octoprint.plugins.tracking - INFO - Sent tracking event pong, payload: {'version': '1.7.2', 'os': 'linux', 'bits': 32, 'python': '3.9.2', 'pip': '21.3.1', 'cores': 4, 'freq': 1800.0, 'ram': 1909063680, 'pi_model': 'Raspberry Pi 4 Model B Rev 1.5', 'octopi_version': '1.0.0', 'plugins': ''} 2022-01-18 11:23:34,577 - octoprint.server.util.sockjs - INFO - User pi logged in on the socket from client ::ffff:192.168.1.71 2022-01-18 11:23:34,587 - octoprint.plugins.tracking - INFO - Sent tracking event startup, payload: {'version': '1.7.2', 'os': 'linux', 'bits': 32, 'python': '3.9.2', 'pip': '21.3.1', 'cores': 4, 'freq': 1800.0, 'ram': 1909063680, 'pi_model': 'Raspberry Pi 4 Model B Rev 1.5', 'octopi_version': '1.0.0'} 2022-01-18 11:23:36,098 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 11:23:36,099 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 11:23:41,457 - octoprint.server.preemptive_cache - INFO - ... done in 7.43s 2022-01-18 11:23:41,487 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.71 2022-01-18 11:23:41,925 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.71 2022-01-18 11:23:41,988 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 11:23:41,988 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 11:23:43,189 - octoprint.server.util.sockjs - INFO - User pi logged in on the socket from client ::ffff:192.168.1.71 2022-01-18 11:23:43,801 - octoprint.plugins.tracking - INFO - Sent tracking event webui_load, payload: {'browser_name': 'Chrome', 'browser_version': '97.0.4692.71', 'os_name': 'Windows', 'os_version': '10'} 2022-01-18 11:23:49,568 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2022-01-18 11:23:49,584 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 7 port/baudrate candidates: /dev/ttyUSB0@115200, /dev/ttyUSB0@250000, /dev/ttyUSB0@230400, /dev/ttyUSB0@57600, /dev/ttyUSB0@38400, /dev/ttyUSB0@19200, /dev/ttyUSB0@9600 2022-01-18 11:23:49,584 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200 2022-01-18 11:23:49,584 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200 2022-01-18 11:23:49,636 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-18 11:23:49,648 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 11:23:49,659 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Operational" 2022-01-18 11:23:49,669 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 11:23:49,736 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin CR-6 community firmware - release 6.1 (based on Marlin 2.0.8.1) (Jun 4 2021 16:53:51)" 2022-01-18 11:23:49,769 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting 2022-01-18 11:23:49,778 - octoprint.util.comm - INFO - Firmware states that it supports emergency GCODEs to be sent without waiting for an acknowledgement first 2022-01-18 11:23:49,934 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {'firmware_name': 'Marlin CR-6 community firmware - release 6.1 (based on Marlin 2.0.8.1) (Jun 4 2021 16:53:51)', 'printer_port': 'AUTO', 'printer_baudrate': 0} 2022-01-18 11:28:18,210 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 11:28:18,211 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 11:28:18,289 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.71 2022-01-18 11:28:18,613 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.71 2022-01-18 11:28:18,650 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 11:28:18,651 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 11:28:19,753 - octoprint.server.util.sockjs - INFO - User pi logged in on the socket from client ::ffff:192.168.1.71 2022-01-18 11:28:20,404 - octoprint.plugins.tracking - INFO - Sent tracking event webui_load, payload: {'browser_name': 'Chrome', 'browser_version': '97.0.4692.71', 'os_name': 'Windows', 'os_version': '10'} 2022-01-18 11:38:28,501 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2022-01-18 11:38:30,555 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity changed from online to offline 2022-01-18 11:38:30,556 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 8.8.8.8:53 is not working 2022-01-18 11:38:30,556 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is not working 2022-01-18 11:40:40,302 - octoprint.filemanager.analysis - INFO - Starting analysis of local:CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode 2022-01-18 11:40:40,305 - octoprint.filemanager.analysis - INFO - Invoking analysis command: /home/pi/oprint/bin/python -m octoprint analysis gcode --speed-x=6000 --speed-y=6000 --max-t=10 --throttle=0.0 --throttle-lines=100 --bed-z=0.0 /home/pi/.octoprint/uploads/CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode 2022-01-18 11:40:40,356 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 11:40:40,443 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Sending file to SD" 2022-01-18 11:40:40,449 - octoprint.plugins.action_command_notification - INFO - Got a notification: ccr6se~1.gco 2022-01-18 11:40:40,626 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 28, current line = 29 | Last lines in terminal: | Recv: ok | Send: N20 G1 X10.1 Y200.0 Z0.28 F1500.0 E15*90 | Recv: ok | Send: N21 G1 X10.4 Y200.0 Z0.28 F5000.0*62 | Recv: ok | Send: N22 G1 X10.4 Y20 Z0.28 F1500.0 E30*116 | Recv: ok | Send: N23 G92 E0*118 | Recv: ok | Send: N24 G1 Z2.0 F3000*45 | Recv: ok | Send: N25 G92 E0*112 | Recv: ok | Send: N26 G92 E0*115 | Recv: ok | Send: N27 G1 F3000 E-6.5*29 | Recv: ok | Send: N28 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*33 | Recv: Error:No Checksum with line number, Last Line: 27 | Recv: Resend: 28 2022-01-18 11:40:40,653 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 28, current line = 29 | Last lines in terminal: | Recv: ok | Send: N22 G1 X10.4 Y20 Z0.28 F1500.0 E30*116 | Recv: ok | Send: N23 G92 E0*118 | Recv: ok | Send: N24 G1 Z2.0 F3000*45 | Recv: ok | Send: N25 G92 E0*112 | Recv: ok | Send: N26 G92 E0*115 | Recv: ok | Send: N27 G1 F3000 E-6.5*29 | Recv: ok | Send: N28 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*33 | Recv: Error:No Checksum with line number, Last Line: 27 | Recv: Resend: 28 | Recv: ok | Send: N28 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*33 | Recv: Error:No Checksum with line number, Last Line: 27 | Recv: Resend: 28 2022-01-18 11:40:40,682 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 28, current line = 29 | Last lines in terminal: | Recv: ok | Send: N24 G1 Z2.0 F3000*45 | Recv: ok | Send: N25 G92 E0*112 | Recv: ok | Send: N26 G92 E0*115 | Recv: ok | Send: N27 G1 F3000 E-6.5*29 | Recv: ok | Send: N28 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*33 | Recv: Error:No Checksum with line number, Last Line: 27 | Recv: Resend: 28 | Recv: ok | Send: N28 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*33 | Recv: Error:No Checksum with line number, Last Line: 27 | Recv: Resend: 28 | Recv: ok | Send: N28 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*33 | Recv: Error:No Checksum with line number, Last Line: 27 | Recv: Resend: 28 2022-01-18 11:40:40,709 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 28, current line = 29 | Last lines in terminal: | Recv: ok | Send: N26 G92 E0*115 | Recv: ok | Send: N27 G1 F3000 E-6.5*29 | Recv: ok | Send: N28 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*33 | Recv: Error:No Checksum with line number, Last Line: 27 | Recv: Resend: 28 | Recv: ok | Send: N28 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*33 | Recv: Error:No Checksum with line number, Last Line: 27 | Recv: Resend: 28 | Recv: ok | Send: N28 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*33 | Recv: Error:No Checksum with line number, Last Line: 27 | Recv: Resend: 28 | Recv: ok | Send: N28 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*33 | Recv: Error:No Checksum with line number, Last Line: 27 | Recv: Resend: 28 2022-01-18 11:40:40,736 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 28, current line = 29 | Last lines in terminal: | Recv: ok | Send: N28 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*33 | Recv: Error:No Checksum with line number, Last Line: 27 | Recv: Resend: 28 | Recv: ok | Send: N28 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*33 | Recv: Error:No Checksum with line number, Last Line: 27 | Recv: Resend: 28 | Recv: ok | Send: N28 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*33 | Recv: Error:No Checksum with line number, Last Line: 27 | Recv: Resend: 28 | Recv: ok | Send: N28 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*33 | Recv: Error:No Checksum with line number, Last Line: 27 | Recv: Resend: 28 | Recv: ok | Send: N28 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*33 | Recv: Error:No Checksum with line number, Last Line: 27 | Recv: Resend: 28 2022-01-18 11:40:40,890 - octoprint.util.comm - WARNING - Printer keeps requesting line 28 again and again, communication stuck 2022-01-18 11:40:40,890 - octoprint.util.comm - INFO - Changing monitoring state from "Sending file to SD" to "Error" 2022-01-18 11:40:40,892 - octoprint.util.comm - INFO - Force-sending M112 to the printer 2022-01-18 11:40:40,905 - octoprint.filemanager.analysis - INFO - Starting analysis of local:CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode 2022-01-18 11:40:40,909 - octoprint.filemanager.analysis - INFO - Invoking analysis command: /home/pi/oprint/bin/python -m octoprint analysis gcode --speed-x=6000 --speed-y=6000 --max-t=10 --throttle=0.0 --throttle-lines=100 --bed-z=0.0 /home/pi/.octoprint/uploads/CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode 2022-01-18 11:40:40,942 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2022-01-18 11:40:40,975 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2022-01-18 11:40:41,446 - octoprint.util.comm - INFO - Firmware didn't send an 'ok' with their resend request. That's a known bug with some firmware variants out there. Simulating an ok to continue... 2022-01-18 11:41:00,313 - octoprint.filemanager.analysis - INFO - Analysis of entry local:CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode finished, needed 19.41s 2022-01-18 11:43:30,650 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity changed from offline to online 2022-01-18 11:43:30,718 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2022-01-18 11:43:31,492 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2022-01-18 11:45:13,338 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Opening serial connection" 2022-01-18 11:45:13,340 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200 2022-01-18 11:45:13,361 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial connection" to "Connecting" 2022-01-18 11:45:13,363 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 11:45:13,373 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 11:45:13,377 - octoprint.util.comm - INFO - Changing monitoring state from "Connecting" to "Operational" 2022-01-18 11:45:13,391 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 11:45:15,908 - octoprint.server.api.system - INFO - Performing command for core:restart: sudo service octoprint restart 2022-01-18 11:45:17,514 - octoprint.startup - INFO - ****************************************************************************** 2022-01-18 11:45:17,516 - octoprint.startup - INFO - Starting OctoPrint 1.7.2 2022-01-18 11:45:17,517 - octoprint.startup - INFO - ****************************************************************************** 2022-01-18 11:45:17,789 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity changed from offline to online 2022-01-18 11:45:17,891 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: online 2022-01-18 11:45:17,891 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 8.8.8.8:53 is working 2022-01-18 11:45:17,892 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is working 2022-01-18 11:45:18,072 - octoprint.startup - INFO - Blacklist processing done, adding 3 blacklisted plugin versions: roomtemp (any), GcodeEditor (>=0.1.1,<=0.2.8), gcodeleveling (>=0.1.0,<=0.1.1) 2022-01-18 11:45:18,073 - octoprint.plugin.core - WARNING - Invalid version requirement >=0.1.1,<=0.2.8 for blacklist entry GcodeEditor, ignoring 2022-01-18 11:45:18,073 - octoprint.plugin.core - WARNING - Invalid version requirement >=0.1.0,<=0.1.1 for blacklist entry gcodeleveling, ignoring 2022-01-18 11:45:18,100 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2022-01-18 11:45:18,935 - octoprint.plugin.core - INFO - Found 18 plugin(s) providing 18 mixin implementations, 38 hook handlers 2022-01-18 11:45:19,000 - octoprint.server.heartbeat - INFO - Starting server heartbeat, 900.0s interval 2022-01-18 11:45:19,017 - octoprint.server - INFO - Intermediary server started 2022-01-18 11:45:19,030 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/pi/.octoprint/uploads... 2022-01-18 11:45:19,045 - octoprint.filemanager.storage - INFO - ... file metadata for /home/pi/.octoprint/uploads initialized successfully. 2022-01-18 11:45:19,048 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_SHOW (needs: "Need(method='role', value='plugin_action_command_notification_show')") 2022-01-18 11:45:19,049 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_CLEAR (needs: "Need(method='role', value='plugin_action_command_notification_clear')") 2022-01-18 11:45:19,049 - octoprint.server - INFO - Added new permission from plugin action_command_prompt: PLUGIN_ACTION_COMMAND_PROMPT_INTERACT (needs: "Need(method='role', value='plugin_action_command_prompt_interact')") 2022-01-18 11:45:19,049 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_READ (needs: "Need(method='role', value='plugin_announcements_read')") 2022-01-18 11:45:19,049 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_MANAGE (needs: "Need(method='role', value='plugin_announcements_manage'), Need(method='role', value='plugin_announcements_read')") 2022-01-18 11:45:19,050 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_ADMIN (needs: "Need(method='role', value='plugin_appkeys_admin')") 2022-01-18 11:45:19,050 - octoprint.server - INFO - Added new permission from plugin backup: PLUGIN_BACKUP_ACCESS (needs: "Need(method='role', value='plugin_backup_access')") 2022-01-18 11:45:19,050 - octoprint.server - INFO - Added new permission from plugin firmware_check: PLUGIN_FIRMWARE_CHECK_DISPLAY (needs: "Need(method='role', value='plugin_firmware_check_display')") 2022-01-18 11:45:19,051 - octoprint.server - INFO - Added new permission from plugin logging: PLUGIN_LOGGING_MANAGE (needs: "Need(method='role', value='plugin_logging_manage')") 2022-01-18 11:45:19,051 - octoprint.server - INFO - Added new permission from plugin pi_support: PLUGIN_PI_SUPPORT_STATUS (needs: "Need(method='role', value='plugin_pi_support_check')") 2022-01-18 11:45:19,051 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_MANAGE (needs: "Need(method='role', value='plugin_pluginmanager_manage')") 2022-01-18 11:45:19,051 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_INSTALL (needs: "Need(method='role', value='plugin_pluginmanager_install'), Need(method='role', value='plugin_pluginmanager_manage')") 2022-01-18 11:45:19,052 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CHECK (needs: "Need(method='role', value='plugin_softwareupdate_check')") 2022-01-18 11:45:19,052 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_UPDATE (needs: "Need(method='role', value='plugin_softwareupdate_update')") 2022-01-18 11:45:19,052 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CONFIGURE (needs: "Need(method='role', value='plugin_softwareupdate_configure')") 2022-01-18 11:45:19,794 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2022-01-18 11:45:20,505 - octoprint.util.pip - INFO - Version of pip is 21.3.1 2022-01-18 11:45:20,508 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-01-18 11:45:20,508 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-01-18 11:45:20,544 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk 2022-01-18 11:45:20,585 - octoprint.plugin.core - INFO - Initialized 18 plugin implementation(s) 2022-01-18 11:45:20,591 - octoprint.plugin.core - INFO - 18 plugin(s) registered with the system: | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/appkeys | Backup & Restore (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/backup | Core Wizard (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/corewizard | Discovery (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/discovery | Error Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/errortracking | Event Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/eventmanager | File Check (2021.2.23) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_file_check | Firmware Check (2021.10.11) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmware_check | GCode Viewer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/gcodeviewer | Logging (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/logging | Pi Support Plugin (2021.10.28) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/pluginmanager | Software Update (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/softwareupdate | Virtual Printer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2022-01-18 11:45:20,614 - octoprint.environment - INFO - Detected environment is Python 3.9.2 under Linux (linux). Details: | hardware: | cores: 4 | freq: 1800.0 | ram: 1909063680 | os: | bits: 32 | id: linux | platform: linux | plugins: | pi_support: | model: Raspberry Pi 4 Model B Rev 1.5 | octopi_version: 1.0.0 | throttle_state: '0x0' | python: | pip: 21.3.1 | version: 3.9.2 | virtualenv: /home/pi/oprint 2022-01-18 11:45:20,623 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/webassets... 2022-01-18 11:45:20,638 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-cache... 2022-01-18 11:45:21,004 - octoprint.server - INFO - Shutting down intermediary server... 2022-01-18 11:45:21,021 - octoprint.server - INFO - Intermediary server shut down 2022-01-18 11:45:21,023 - octoprint.events - INFO - Processing startup event, this is our first event 2022-01-18 11:45:21,023 - octoprint.events - INFO - Adding 2 events to queue that were held back before startup event 2022-01-18 11:45:21,030 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue... 2022-01-18 11:45:21,031 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json 2022-01-18 11:45:21,041 - octoprint.server - INFO - Autoconnect on startup is configured, trying to connect to the printer... 2022-01-18 11:45:21,069 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2022-01-18 11:45:21,071 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue 2022-01-18 11:45:21,323 - octoprint.plugins.tracking - INFO - Sent tracking event system_unthrottled, payload: {'throttled_now': False, 'throttled_past': False, 'throttled_mask': 0, 'throttled_voltage_now': False, 'throttled_voltage_past': False, 'throttled_overheat_now': False, 'throttled_overheat_past': False} 2022-01-18 11:45:21,422 - octoprint.server - INFO - Trying to connect to configured serial port None 2022-01-18 11:45:21,522 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2022-01-18 11:45:21,567 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder... 2022-01-18 11:45:21,581 - octoprint.server.util.watchdog - INFO - ... initial scan done. 2022-01-18 11:45:21,960 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 7 port/baudrate candidates: /dev/ttyUSB0@115200, /dev/ttyUSB0@250000, /dev/ttyUSB0@230400, /dev/ttyUSB0@57600, /dev/ttyUSB0@38400, /dev/ttyUSB0@19200, /dev/ttyUSB0@9600 2022-01-18 11:45:21,960 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200 2022-01-18 11:45:21,960 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200 2022-01-18 11:45:22,044 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2022-01-18 11:45:22,054 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-18 11:45:22,056 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 11:45:22,062 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Operational" 2022-01-18 11:45:22,065 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 11:45:22,610 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on raspberrypi._http._tcp.local.' for _http._tcp.local. 2022-01-18 11:45:23,426 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on raspberrypi._octoprint._tcp.local.' for _octoprint._tcp.local. 2022-01-18 11:45:23,454 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance on raspberrypi for SSDP 2022-01-18 11:45:23,473 - octoprint.server - INFO - Listening on http://127.0.0.1:5000 2022-01-18 11:45:23,557 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2022-01-18 11:45:24,355 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2022-01-18 11:45:24,361 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-01-18 11:45:24,375 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-01-18 11:45:24,431 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 11.8GB. That is considered sufficient for updating. 2022-01-18 11:45:24,493 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2022-01-18 11:45:24,612 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'http://192.168.1.76/', 'path': '/', 'query_string': 'l10n=en'} 2022-01-18 11:45:24,791 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 5, 'printer_state': 'OPERATIONAL'} 2022-01-18 11:45:26,591 - octoprint.plugins.tracking - INFO - Sent tracking event pong, payload: {'version': '1.7.2', 'os': 'linux', 'bits': 32, 'python': '3.9.2', 'pip': '21.3.1', 'cores': 4, 'freq': 1800.0, 'ram': 1909063680, 'pi_model': 'Raspberry Pi 4 Model B Rev 1.5', 'octopi_version': '1.0.0', 'plugins': ''} 2022-01-18 11:45:26,743 - octoprint.plugins.tracking - INFO - Sent tracking event startup, payload: {'version': '1.7.2', 'os': 'linux', 'bits': 32, 'python': '3.9.2', 'pip': '21.3.1', 'cores': 4, 'freq': 1800.0, 'ram': 1909063680, 'pi_model': 'Raspberry Pi 4 Model B Rev 1.5', 'octopi_version': '1.0.0'} 2022-01-18 11:45:29,115 - octoprint.server.preemptive_cache - INFO - ... done in 4.50s 2022-01-18 11:45:30,439 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.71 2022-01-18 11:45:30,494 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 11:45:30,495 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 11:45:30,549 - octoprint.server.util.sockjs - INFO - User pi logged in on the socket from client ::ffff:192.168.1.71 2022-01-18 11:49:38,746 - octoprint.plugins.action_command_notification - INFO - Got a notification: Media Removed 2022-01-18 11:49:41,470 - octoprint.plugins.action_command_notification - INFO - Got a notification: Media Inserted 2022-01-18 11:53:42,851 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 11:53:42,854 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 11:53:43,635 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.71 2022-01-18 11:53:43,680 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 11:53:43,681 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 11:53:44,761 - octoprint.server.util.sockjs - INFO - User pi logged in on the socket from client ::ffff:192.168.1.71 2022-01-18 11:53:45,531 - octoprint.plugins.tracking - INFO - Sent tracking event webui_load, payload: {'browser_name': 'Chrome', 'browser_version': '97.0.4692.71', 'os_name': 'Windows', 'os_version': '10'} 2022-01-18 11:53:52,969 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.71 2022-01-18 11:53:58,722 - octoprint.filemanager.analysis - INFO - Starting analysis of local:CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode 2022-01-18 11:53:58,723 - octoprint.filemanager.analysis - INFO - Invoking analysis command: /home/pi/oprint/bin/python -m octoprint analysis gcode --speed-x=6000 --speed-y=6000 --max-t=10 --throttle=0.0 --throttle-lines=100 --bed-z=0.0 /home/pi/.octoprint/uploads/CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode 2022-01-18 11:54:08,733 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 11:54:17,937 - octoprint.filemanager.analysis - INFO - Analysis of entry local:CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode finished, needed 19.22s 2022-01-18 11:54:56,730 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2022-01-18 11:55:02,246 - octoprint.plugins.action_command_notification - INFO - Got a notification: Hotend Idle Timeout 2022-01-18 11:56:06,281 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 11:56:06,282 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 11:56:06,379 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.71 2022-01-18 11:56:06,690 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.71 2022-01-18 11:56:06,714 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 11:56:06,714 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 11:56:07,771 - octoprint.server.util.sockjs - INFO - User pi logged in on the socket from client ::ffff:192.168.1.71 2022-01-18 11:56:08,416 - octoprint.plugins.tracking - INFO - Sent tracking event webui_load, payload: {'browser_name': 'Chrome', 'browser_version': '97.0.4692.71', 'os_name': 'Windows', 'os_version': '10'} 2022-01-18 11:58:35,938 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 11:58:35,939 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 11:58:36,294 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.71 2022-01-18 11:58:36,317 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 11:58:36,317 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 11:58:37,119 - octoprint.server.util.sockjs - INFO - User pi logged in on the socket from client ::ffff:192.168.1.71 2022-01-18 11:58:37,897 - octoprint.plugins.tracking - INFO - Sent tracking event webui_load, payload: {'browser_name': 'Chrome', 'browser_version': '97.0.4692.71', 'os_name': 'Windows', 'os_version': '10'} 2022-01-18 11:58:44,822 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2022-01-18 11:59:26,355 - octoprint.filemanager.analysis - INFO - Starting analysis of local:CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode 2022-01-18 11:59:26,356 - octoprint.filemanager.analysis - INFO - Invoking analysis command: /home/pi/oprint/bin/python -m octoprint analysis gcode --speed-x=6000 --speed-y=6000 --max-t=10 --throttle=0.0 --throttle-lines=100 --bed-z=0.0 /home/pi/.octoprint/uploads/CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode 2022-01-18 11:59:45,777 - octoprint.filemanager.analysis - INFO - Analysis of entry local:CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode finished, needed 19.42s 2022-01-18 12:00:19,002 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2022-01-18 12:00:22,026 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.71 2022-01-18 12:00:24,771 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 905, 'printer_state': 'OPERATIONAL'} 2022-01-18 12:04:39,976 - octoprint.startup - INFO - ****************************************************************************** 2022-01-18 12:04:39,978 - octoprint.startup - INFO - Starting OctoPrint 1.7.2 2022-01-18 12:04:39,979 - octoprint.startup - INFO - ****************************************************************************** 2022-01-18 12:04:46,261 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: offline 2022-01-18 12:04:46,262 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 8.8.8.8:53 is not working 2022-01-18 12:04:46,263 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is not working 2022-01-18 12:04:46,272 - octoprint.startup - INFO - We don't appear to be online, not fetching plugin blacklist 2022-01-18 12:04:46,366 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2022-01-18 12:04:47,588 - octoprint.plugin.core - INFO - Found 18 plugin(s) providing 18 mixin implementations, 38 hook handlers 2022-01-18 12:04:47,668 - octoprint.server.heartbeat - INFO - Starting server heartbeat, 900.0s interval 2022-01-18 12:04:47,701 - octoprint.server - INFO - Intermediary server started 2022-01-18 12:04:47,714 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/pi/.octoprint/uploads... 2022-01-18 12:04:47,740 - octoprint.filemanager.storage - INFO - ... file metadata for /home/pi/.octoprint/uploads initialized successfully. 2022-01-18 12:04:47,742 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_SHOW (needs: "Need(method='role', value='plugin_action_command_notification_show')") 2022-01-18 12:04:47,743 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_CLEAR (needs: "Need(method='role', value='plugin_action_command_notification_clear')") 2022-01-18 12:04:47,744 - octoprint.server - INFO - Added new permission from plugin action_command_prompt: PLUGIN_ACTION_COMMAND_PROMPT_INTERACT (needs: "Need(method='role', value='plugin_action_command_prompt_interact')") 2022-01-18 12:04:47,745 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_READ (needs: "Need(method='role', value='plugin_announcements_read')") 2022-01-18 12:04:47,746 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_MANAGE (needs: "Need(method='role', value='plugin_announcements_manage'), Need(method='role', value='plugin_announcements_read')") 2022-01-18 12:04:47,747 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_ADMIN (needs: "Need(method='role', value='plugin_appkeys_admin')") 2022-01-18 12:04:47,747 - octoprint.server - INFO - Added new permission from plugin backup: PLUGIN_BACKUP_ACCESS (needs: "Need(method='role', value='plugin_backup_access')") 2022-01-18 12:04:47,748 - octoprint.server - INFO - Added new permission from plugin firmware_check: PLUGIN_FIRMWARE_CHECK_DISPLAY (needs: "Need(method='role', value='plugin_firmware_check_display')") 2022-01-18 12:04:47,749 - octoprint.server - INFO - Added new permission from plugin logging: PLUGIN_LOGGING_MANAGE (needs: "Need(method='role', value='plugin_logging_manage')") 2022-01-18 12:04:47,750 - octoprint.server - INFO - Added new permission from plugin pi_support: PLUGIN_PI_SUPPORT_STATUS (needs: "Need(method='role', value='plugin_pi_support_check')") 2022-01-18 12:04:47,750 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_MANAGE (needs: "Need(method='role', value='plugin_pluginmanager_manage')") 2022-01-18 12:04:47,751 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_INSTALL (needs: "Need(method='role', value='plugin_pluginmanager_install'), Need(method='role', value='plugin_pluginmanager_manage')") 2022-01-18 12:04:47,752 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CHECK (needs: "Need(method='role', value='plugin_softwareupdate_check')") 2022-01-18 12:04:47,753 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_UPDATE (needs: "Need(method='role', value='plugin_softwareupdate_update')") 2022-01-18 12:04:47,754 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CONFIGURE (needs: "Need(method='role', value='plugin_softwareupdate_configure')") 2022-01-18 12:04:48,675 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2022-01-18 12:04:49,382 - octoprint.util.pip - INFO - Version of pip is 21.3.1 2022-01-18 12:04:49,383 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-01-18 12:04:49,384 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-01-18 12:04:49,422 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk 2022-01-18 12:04:49,465 - octoprint.plugin.core - INFO - Initialized 18 plugin implementation(s) 2022-01-18 12:04:49,471 - octoprint.plugin.core - INFO - 18 plugin(s) registered with the system: | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/appkeys | Backup & Restore (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/backup | Core Wizard (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/corewizard | Discovery (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/discovery | Error Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/errortracking | Event Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/eventmanager | File Check (2021.2.23) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_file_check | Firmware Check (2021.10.11) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmware_check | GCode Viewer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/gcodeviewer | Logging (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/logging | Pi Support Plugin (2021.10.28) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/pluginmanager | Software Update (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/softwareupdate | Virtual Printer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2022-01-18 12:04:49,496 - octoprint.environment - INFO - Detected environment is Python 3.9.2 under Linux (linux). Details: | hardware: | cores: 4 | freq: 1800.0 | ram: 1909063680 | os: | bits: 32 | id: linux | platform: linux | plugins: | pi_support: | model: Raspberry Pi 4 Model B Rev 1.5 | octopi_version: 1.0.0 | throttle_state: '0x0' | python: | pip: 21.3.1 | version: 3.9.2 | virtualenv: /home/pi/oprint 2022-01-18 12:04:49,503 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/webassets... 2022-01-18 12:04:49,516 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-cache... 2022-01-18 12:04:49,934 - octoprint.server - INFO - Shutting down intermediary server... 2022-01-18 12:04:50,205 - octoprint.server - INFO - Intermediary server shut down 2022-01-18 12:04:50,207 - octoprint.events - INFO - Processing startup event, this is our first event 2022-01-18 12:04:50,207 - octoprint.events - INFO - Adding 1 events to queue that were held back before startup event 2022-01-18 12:04:50,207 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue... 2022-01-18 12:04:50,209 - octoprint.server - INFO - Autoconnect on startup is configured, trying to connect to the printer... 2022-01-18 12:04:50,212 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue 2022-01-18 12:04:50,230 - octoprint.server - INFO - Trying to connect to configured serial port None 2022-01-18 12:04:50,249 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2022-01-18 12:04:50,254 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder... 2022-01-18 12:04:50,256 - octoprint.server.util.watchdog - INFO - ... initial scan done. 2022-01-18 12:04:50,266 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 7 port/baudrate candidates: /dev/ttyUSB0@115200, /dev/ttyUSB0@250000, /dev/ttyUSB0@230400, /dev/ttyUSB0@57600, /dev/ttyUSB0@38400, /dev/ttyUSB0@19200, /dev/ttyUSB0@9600 2022-01-18 12:04:50,266 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200 2022-01-18 12:04:50,266 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200 2022-01-18 12:04:50,282 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-18 12:04:50,284 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 12:04:50,289 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Operational" 2022-01-18 12:04:50,293 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 12:04:50,331 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin CR-6 community firmware - release 6.1 (based on Marlin 2.0.8.1) (Jun 4 2021 16:53:51)" 2022-01-18 12:04:50,342 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting 2022-01-18 12:04:50,359 - octoprint.util.comm - INFO - Firmware states that it supports emergency GCODEs to be sent without waiting for an acknowledgement first 2022-01-18 12:04:51,068 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on raspberrypi._http._tcp.local.' for _http._tcp.local. 2022-01-18 12:04:51,884 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on raspberrypi._octoprint._tcp.local.' for _octoprint._tcp.local. 2022-01-18 12:04:51,931 - octoprint.server - INFO - Listening on http://127.0.0.1:5000 2022-01-18 12:04:52,023 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2022-01-18 12:04:52,824 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2022-01-18 12:04:52,835 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-01-18 12:04:52,846 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-01-18 12:04:52,885 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 11.8GB. That is considered sufficient for updating. 2022-01-18 12:04:52,885 - octoprint.plugins.softwareupdate - INFO - Not fetching check overlays, we are offline 2022-01-18 12:04:53,036 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2022-01-18 12:04:54,934 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity changed from offline to online 2022-01-18 12:04:54,973 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2022-01-18 12:04:55,887 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2022-01-18 12:04:56,311 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2022-01-18 12:04:56,312 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-01-18 12:04:56,313 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-01-18 12:04:56,330 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk 2022-01-18 12:04:56,385 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'http://192.168.1.76/', 'path': '/', 'query_string': 'l10n=en'} 2022-01-18 12:04:56,493 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 9, 'printer_state': 'OPERATIONAL'} 2022-01-18 12:04:56,674 - octoprint.plugins.tracking - INFO - Sent tracking event pong, payload: {'version': '1.7.2', 'os': 'linux', 'bits': 32, 'python': '3.9.2', 'pip': '21.3.1', 'cores': 4, 'freq': 1800.0, 'ram': 1909063680, 'pi_model': 'Raspberry Pi 4 Model B Rev 1.5', 'octopi_version': '1.0.0', 'plugins': ''} 2022-01-18 12:04:56,869 - octoprint.plugins.tracking - INFO - Sent tracking event startup, payload: {'version': '1.7.2', 'os': 'linux', 'bits': 32, 'python': '3.9.2', 'pip': '21.3.1', 'cores': 4, 'freq': 1800.0, 'ram': 1909063680, 'pi_model': 'Raspberry Pi 4 Model B Rev 1.5', 'octopi_version': '1.0.0'} 2022-01-18 12:07:05,288 - octoprint.server.preemptive_cache - INFO - ... done in 5.01s 2022-01-18 12:07:55,288 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 12:07:55,289 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 12:07:55,802 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.71 2022-01-18 12:07:55,837 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 12:07:55,837 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 12:07:57,254 - octoprint.server.util.sockjs - INFO - User pi logged in on the socket from client ::ffff:192.168.1.71 2022-01-18 12:08:49,147 - octoprint.printer.standard.job - INFO - Print job selected - origin: local, path: CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode, owner: pi, user: pi 2022-01-18 12:08:56,040 - octoprint.printer.standard.job - INFO - Print job selected - origin: sdcard, path: CC11A8~1.GCO, owner: pi, user: pi 2022-01-18 12:08:56,051 - octoprint.plugins.action_command_notification - INFO - Got a notification: CCR6SE CCR6SE Pi_4_Top_v2 2022-01-18 12:09:19,552 - octoprint.printer.standard.job - INFO - Print job deselected - user: n/a 2022-01-18 12:09:27,553 - octoprint.printer.standard.job - INFO - Print job selected - origin: local, path: CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode, owner: pi, user: pi 2022-01-18 12:09:27,570 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting" 2022-01-18 12:09:27,577 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode, owner: pi, user: pi 2022-01-18 12:09:27,599 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 12:09:27,618 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Printing" 2022-01-18 12:09:27,652 - octoprint.plugins.action_command_notification - INFO - Got a notification: Time Left 11h08m07s 2022-01-18 12:09:27,694 - octoprint.plugins.action_command_notification - INFO - Got a notification: Bed Heating... 2022-01-18 12:09:27,809 - octoprint.plugins.tracking - INFO - Sent tracking event print_started, payload: {'origin': 'local', 'file': '73da9fe1157f6619f8666e1b02fb2b0562c691db'} 2022-01-18 12:09:29,687 - octoprint.util.comm - INFO - Printer seems to support the busy protocol, will adjust timeouts and set busy interval accordingly 2022-01-18 12:12:32,542 - octoprint.plugins.action_command_notification - INFO - Got a notification: Printing... 2022-01-18 12:12:32,550 - octoprint.util.comm - INFO - Telling the printer to set the busy interval to our "communicationBusy" timeout - 1s = 2s 2022-01-18 12:14:48,654 - octoprint.plugins.action_command_notification - INFO - Got a notification: Printing... 2022-01-18 12:15:26,104 - octoprint.plugins.action_command_notification - INFO - Got a notification: Waiting for heat-up... 2022-01-18 12:16:06,433 - octoprint.plugins.action_command_notification - INFO - Got a notification: Printing... 2022-01-18 12:16:18,254 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 30, current line = 31 | Last lines in terminal: | Recv: T:245.08 /245.00 B:80.04 /80.00 @:80 B@:48 | Recv: echo:busy: processing | Recv: T:245.55 /245.00 B:80.04 /80.00 @:75 B@:50 | Recv: ok | Send: N25 G92 E0*112 | Recv: X:10.4000 Y:20.0000 Z:0.2800 E:0.0000 Count X:832 Y:13600 Z:165 | Recv: ok | Send: N26 G1 Z2.0 F3000*47 | Recv: ok | Send: N27 G92 E0*114 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13187 Z:167 | Recv: ok | Send: N28 G92 E0*125 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13159 Z:167 | Recv: ok | Send: N29 G1 F3000 E-6.5*19 | Recv: ok | Send: N30 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*40 | Recv: Error:No Checksum with line number, Last Line: 29 | Recv: Resend: 30 2022-01-18 12:16:18,284 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 30, current line = 31 | Last lines in terminal: | Send: N25 G92 E0*112 | Recv: X:10.4000 Y:20.0000 Z:0.2800 E:0.0000 Count X:832 Y:13600 Z:165 | Recv: ok | Send: N26 G1 Z2.0 F3000*47 | Recv: ok | Send: N27 G92 E0*114 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13187 Z:167 | Recv: ok | Send: N28 G92 E0*125 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13159 Z:167 | Recv: ok | Send: N29 G1 F3000 E-6.5*19 | Recv: ok | Send: N30 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*40 | Recv: Error:No Checksum with line number, Last Line: 29 | Recv: Resend: 30 | Recv: ok | Send: N30 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*40 | Recv: Error:No Checksum with line number, Last Line: 29 | Recv: Resend: 30 2022-01-18 12:16:18,314 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 30, current line = 31 | Last lines in terminal: | Recv: ok | Send: N27 G92 E0*114 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13187 Z:167 | Recv: ok | Send: N28 G92 E0*125 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13159 Z:167 | Recv: ok | Send: N29 G1 F3000 E-6.5*19 | Recv: ok | Send: N30 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*40 | Recv: Error:No Checksum with line number, Last Line: 29 | Recv: Resend: 30 | Recv: ok | Send: N30 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*40 | Recv: Error:No Checksum with line number, Last Line: 29 | Recv: Resend: 30 | Recv: ok | Send: N30 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*40 | Recv: Error:No Checksum with line number, Last Line: 29 | Recv: Resend: 30 2022-01-18 12:16:18,344 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 30, current line = 31 | Last lines in terminal: | Send: N28 G92 E0*125 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13159 Z:167 | Recv: ok | Send: N29 G1 F3000 E-6.5*19 | Recv: ok | Send: N30 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*40 | Recv: Error:No Checksum with line number, Last Line: 29 | Recv: Resend: 30 | Recv: ok | Send: N30 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*40 | Recv: Error:No Checksum with line number, Last Line: 29 | Recv: Resend: 30 | Recv: ok | Send: N30 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*40 | Recv: Error:No Checksum with line number, Last Line: 29 | Recv: Resend: 30 | Recv: ok | Send: N30 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*40 | Recv: Error:No Checksum with line number, Last Line: 29 | Recv: Resend: 30 2022-01-18 12:16:18,372 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 30, current line = 31 | Last lines in terminal: | Recv: ok | Send: N30 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*40 | Recv: Error:No Checksum with line number, Last Line: 29 | Recv: Resend: 30 | Recv: ok | Send: N30 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*40 | Recv: Error:No Checksum with line number, Last Line: 29 | Recv: Resend: 30 | Recv: ok | Send: N30 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*40 | Recv: Error:No Checksum with line number, Last Line: 29 | Recv: Resend: 30 | Recv: ok | Send: N30 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*40 | Recv: Error:No Checksum with line number, Last Line: 29 | Recv: Resend: 30 | Recv: ok | Send: N30 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*40 | Recv: Error:No Checksum with line number, Last Line: 29 | Recv: Resend: 30 2022-01-18 12:16:18,533 - octoprint.util.comm - WARNING - Printer keeps requesting line 30 again and again, communication stuck 2022-01-18 12:16:18,533 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Error" 2022-01-18 12:16:18,538 - octoprint.util.comm - INFO - Force-sending M112 to the printer 2022-01-18 12:16:18,571 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2022-01-18 12:16:18,588 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2022-01-18 12:16:18,780 - octoprint.plugins.tracking - INFO - Sent tracking event commerror_resend_loop, payload: {'commerror_text': 'Printer keeps requesting line 30 again and again, communication stuck'} 2022-01-18 12:16:18,927 - octoprint.plugins.tracking - INFO - Sent tracking event print_failed, payload: {'origin': 'local', 'file': '73da9fe1157f6619f8666e1b02fb2b0562c691db', 'elapsed': 410, 'reason': 'error', 'commerror_text': 'Printer keeps requesting line 30 again and again, communication stuck'} 2022-01-18 12:16:19,078 - octoprint.util.comm - INFO - Firmware didn't send an 'ok' with their resend request. That's a known bug with some firmware variants out there. Simulating an ok to continue... 2022-01-18 12:18:37,853 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2022-01-18 12:18:37,867 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 7 port/baudrate candidates: /dev/ttyUSB0@115200, /dev/ttyUSB0@250000, /dev/ttyUSB0@230400, /dev/ttyUSB0@57600, /dev/ttyUSB0@38400, /dev/ttyUSB0@19200, /dev/ttyUSB0@9600 2022-01-18 12:18:37,868 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200 2022-01-18 12:18:37,868 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200 2022-01-18 12:18:37,887 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-18 12:18:37,888 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 12:18:38,198 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2022-01-18 12:18:38,202 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Offline" 2022-01-18 12:18:38,209 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2022-01-18 12:18:39,001 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Opening serial connection" 2022-01-18 12:18:39,003 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200 2022-01-18 12:18:39,067 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial connection" to "Connecting" 2022-01-18 12:18:39,071 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 12:18:40,457 - octoprint.util.comm - INFO - Printer seems to support the busy protocol, will adjust timeouts and set busy interval accordingly 2022-01-18 12:18:42,272 - octoprint.util.comm - INFO - Changing monitoring state from "Connecting" to "Offline" 2022-01-18 12:18:42,281 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2022-01-18 12:18:47,550 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2022-01-18 12:18:47,563 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 7 port/baudrate candidates: /dev/ttyUSB0@115200, /dev/ttyUSB0@250000, /dev/ttyUSB0@230400, /dev/ttyUSB0@57600, /dev/ttyUSB0@38400, /dev/ttyUSB0@19200, /dev/ttyUSB0@9600 2022-01-18 12:18:47,563 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200 2022-01-18 12:18:47,564 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200 2022-01-18 12:18:47,602 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-18 12:18:47,604 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 12:18:48,456 - octoprint.util.comm - INFO - Printer seems to support the busy protocol, will adjust timeouts and set busy interval accordingly 2022-01-18 12:19:37,275 - octoprint.plugins.action_command_notification - INFO - Got a notification: CCR6SE CCR6SE Tie_Fighter_ 2022-01-18 12:19:47,670 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2022-01-18 12:19:56,516 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 785, 'printer_state': 'DETECT_SERIAL'} 2022-01-18 12:20:06,352 - octoprint.plugins.action_command_notification - INFO - Got a notification: Waiting for heat-up... 2022-01-18 12:20:48,156 - octoprint.plugins.action_command_notification - INFO - Got a notification: CCR6SE CCR6SE Tie_Fighter_ 2022-01-18 12:20:52,189 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2022-01-18 12:20:52,194 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 12:20:54,196 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2022-01-18 12:20:54,205 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 12:20:59,910 - octoprint.plugins.action_command_notification - INFO - Got a notification: Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2 2022-01-18 12:21:03,919 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 250000 2022-01-18 12:21:03,926 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-18 12:21:03,929 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 12:21:06,148 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2022-01-18 12:21:06,155 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 12:21:08,161 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2022-01-18 12:21:08,167 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 12:21:10,169 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 230400 2022-01-18 12:21:10,173 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-18 12:21:10,177 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 12:21:13,484 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2022-01-18 12:21:13,490 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 12:21:16,444 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2022-01-18 12:21:16,450 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 12:21:20,146 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 57600 2022-01-18 12:21:20,148 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-18 12:21:20,155 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 12:21:22,153 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2022-01-18 12:21:22,160 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 12:21:24,158 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2022-01-18 12:21:24,165 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 12:21:28,165 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 38400 2022-01-18 12:21:28,169 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-18 12:21:28,176 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 12:21:30,177 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2022-01-18 12:21:30,184 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 12:21:32,185 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2022-01-18 12:21:32,191 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 12:21:34,192 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 19200 2022-01-18 12:21:34,195 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-18 12:21:34,204 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 12:21:36,206 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2022-01-18 12:21:36,212 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 12:21:38,213 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2022-01-18 12:21:38,221 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 12:21:40,223 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 9600 2022-01-18 12:21:40,225 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-18 12:21:40,229 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 12:21:42,230 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2022-01-18 12:21:42,237 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 12:21:44,235 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2022-01-18 12:21:44,242 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 12:21:47,963 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Error" 2022-01-18 12:21:47,999 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2022-01-18 12:21:48,023 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2022-01-18 12:21:48,211 - octoprint.plugins.tracking - INFO - Sent tracking event commerror_autodetect, payload: {'commerror_text': 'No more candidates to test, and no working port/baudrate combination detected.'} 2022-01-18 12:22:16,036 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2022-01-18 12:22:16,050 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 7 port/baudrate candidates: /dev/ttyUSB0@115200, /dev/ttyUSB0@250000, /dev/ttyUSB0@230400, /dev/ttyUSB0@57600, /dev/ttyUSB0@38400, /dev/ttyUSB0@19200, /dev/ttyUSB0@9600 2022-01-18 12:22:16,051 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200 2022-01-18 12:22:16,051 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200 2022-01-18 12:22:16,068 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-18 12:22:16,071 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 12:22:16,689 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Operational" 2022-01-18 12:22:16,693 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 12:22:17,369 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin CR-6 community firmware - release 6.1 (based on Marlin 2.0.8.1) (Jun 4 2021 16:53:51)" 2022-01-18 12:22:17,396 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting 2022-01-18 12:22:17,414 - octoprint.util.comm - INFO - Firmware states that it supports emergency GCODEs to be sent without waiting for an acknowledgement first 2022-01-18 12:22:17,445 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 1, current line = 3 | Last lines in terminal: | Recv: Cap:TOGGLE_LIGHTS:1 | Recv: Cap:CASE_LIGHT_BRIGHTNESS:1 | Recv: Cap:EMERGENCY_PARSER:1 | Recv: Cap:PROMPT_SUPPORT:1 | Recv: Cap:SDCARD:1 | Recv: Cap:REPEAT:0 | Recv: Cap:SD_WRITE:1 | Recv: Cap:AUTOREPORT_SD_STATUS:0 | Recv: Cap:LONG_FILENAME:1 | Recv: Cap:THERMAL_PROTECTION:1 | Recv: Cap:MOTION_MODES:0 | Recv: Cap:ARCS:1 | Recv: Cap:BABYSTEPPING:1 | Recv: Cap:CHAMBER_TEMPERATURE:0 | Recv: Cap:COOLER_TEMPERATURE:0 | Recv: Cap:MEATPACK:0 | Recv: area:{full:{min:{x:-5.0000,y:-2.0000,z:0.0000},max:{x:235.0000,y:235.0000,z:250.0000}},work:{min:{x:-5.0000,y:-2.0000,z:0.0000},max:{x:235.0000,y:235.0000,z:250.0000}}} | Recv: ok | Recv: Error:Line Number is not Last Line Number+1, Last Line: 0 | Recv: Resend: 1 2022-01-18 12:22:17,564 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {'firmware_name': 'Marlin CR-6 community firmware - release 6.1 (based on Marlin 2.0.8.1) (Jun 4 2021 16:53:51)', 'printer_port': 'AUTO', 'printer_baudrate': 0} 2022-01-18 12:22:18,060 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting 2022-01-18 12:22:18,077 - octoprint.util.comm - INFO - Firmware states that it supports emergency GCODEs to be sent without waiting for an acknowledgement first 2022-01-18 12:22:18,947 - octoprint.plugins.action_command_notification - INFO - Got a notification: Time Left 3h20m51s 2022-01-18 12:22:32,192 - octoprint.plugins.action_command_notification - INFO - Got a notification: Time Left 3h20m36s 2022-01-18 12:22:45,118 - octoprint.plugins.action_command_notification - INFO - Got a notification: Time Left 3h20m21s 2022-01-18 12:22:52,778 - octoprint.plugins.action_command_notification - INFO - Got a notification: Print Aborted 2022-01-18 12:22:55,789 - octoprint.util.comm - INFO - Printer seems to support the busy protocol, will adjust timeouts and set busy interval accordingly 2022-01-18 12:22:55,792 - octoprint.util.comm - INFO - Telling the printer to set the busy interval to our "communicationBusy" timeout - 1s = 2s 2022-01-18 12:24:13,866 - octoprint.printer.standard.job - INFO - Print job selected - origin: local, path: CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode, owner: pi, user: pi 2022-01-18 12:24:13,876 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting" 2022-01-18 12:24:13,878 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode, owner: pi, user: pi 2022-01-18 12:24:13,910 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 12:24:13,929 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Printing" 2022-01-18 12:24:13,954 - octoprint.plugins.action_command_notification - INFO - Got a notification: Time Left 11h08m07s 2022-01-18 12:24:13,991 - octoprint.plugins.action_command_notification - INFO - Got a notification: Bed Heating... 2022-01-18 12:24:14,104 - octoprint.plugins.tracking - INFO - Sent tracking event print_started, payload: {'origin': 'local', 'file': '73da9fe1157f6619f8666e1b02fb2b0562c691db'} 2022-01-18 12:24:46,385 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2022-01-18 12:25:14,629 - octoprint.plugins.action_command_notification - INFO - Got a notification: Printing... 2022-01-18 12:27:03,643 - octoprint.plugins.action_command_notification - INFO - Got a notification: Printing... 2022-01-18 12:27:11,908 - octoprint.plugins.action_command_notification - INFO - Got a notification: Printing... 2022-01-18 12:27:28,377 - octoprint.plugins.action_command_notification - INFO - Got a notification: Waiting for heat-up... 2022-01-18 12:28:10,049 - octoprint.plugins.action_command_notification - INFO - Got a notification: Printing... 2022-01-18 12:28:21,849 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 28, current line = 29 | Last lines in terminal: | Recv: echo:busy: processing | Recv: T:245.00 /245.00 B:80.08 /80.00 @:81 B@:46 | Recv: echo:busy: processing | Recv: ok | Send: N23 G92 E0*118 | Recv: X:10.4000 Y:20.0000 Z:0.2800 E:0.0000 Count X:832 Y:13600 Z:165 | Recv: ok | Send: N24 G1 Z2.0 F3000*45 | Recv: ok | Send: N25 G92 E0*112 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13187 Z:167 | Recv: ok | Send: N26 G92 E0*115 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13160 Z:167 | Recv: ok | Send: N27 G1 F3000 E-6.5*29 | Recv: ok | Send: N28 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*33 | Recv: Error:No Checksum with line number, Last Line: 27 | Recv: Resend: 28 2022-01-18 12:28:21,878 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 28, current line = 29 | Last lines in terminal: | Send: N23 G92 E0*118 | Recv: X:10.4000 Y:20.0000 Z:0.2800 E:0.0000 Count X:832 Y:13600 Z:165 | Recv: ok | Send: N24 G1 Z2.0 F3000*45 | Recv: ok | Send: N25 G92 E0*112 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13187 Z:167 | Recv: ok | Send: N26 G92 E0*115 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13160 Z:167 | Recv: ok | Send: N27 G1 F3000 E-6.5*29 | Recv: ok | Send: N28 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*33 | Recv: Error:No Checksum with line number, Last Line: 27 | Recv: Resend: 28 | Recv: ok | Send: N28 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*33 | Recv: Error:No Checksum with line number, Last Line: 27 | Recv: Resend: 28 2022-01-18 12:28:21,908 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 28, current line = 29 | Last lines in terminal: | Recv: ok | Send: N25 G92 E0*112 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13187 Z:167 | Recv: ok | Send: N26 G92 E0*115 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13160 Z:167 | Recv: ok | Send: N27 G1 F3000 E-6.5*29 | Recv: ok | Send: N28 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*33 | Recv: Error:No Checksum with line number, Last Line: 27 | Recv: Resend: 28 | Recv: ok | Send: N28 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*33 | Recv: Error:No Checksum with line number, Last Line: 27 | Recv: Resend: 28 | Recv: ok | Send: N28 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*33 | Recv: Error:No Checksum with line number, Last Line: 27 | Recv: Resend: 28 2022-01-18 12:28:21,938 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 28, current line = 29 | Last lines in terminal: | Send: N26 G92 E0*115 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13160 Z:167 | Recv: ok | Send: N27 G1 F3000 E-6.5*29 | Recv: ok | Send: N28 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*33 | Recv: Error:No Checksum with line number, Last Line: 27 | Recv: Resend: 28 | Recv: ok | Send: N28 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*33 | Recv: Error:No Checksum with line number, Last Line: 27 | Recv: Resend: 28 | Recv: ok | Send: N28 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*33 | Recv: Error:No Checksum with line number, Last Line: 27 | Recv: Resend: 28 | Recv: ok | Send: N28 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*33 | Recv: Error:No Checksum with line number, Last Line: 27 | Recv: Resend: 28 2022-01-18 12:28:21,966 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 28, current line = 29 | Last lines in terminal: | Recv: ok | Send: N28 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*33 | Recv: Error:No Checksum with line number, Last Line: 27 | Recv: Resend: 28 | Recv: ok | Send: N28 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*33 | Recv: Error:No Checksum with line number, Last Line: 27 | Recv: Resend: 28 | Recv: ok | Send: N28 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*33 | Recv: Error:No Checksum with line number, Last Line: 27 | Recv: Resend: 28 | Recv: ok | Send: N28 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*33 | Recv: Error:No Checksum with line number, Last Line: 27 | Recv: Resend: 28 | Recv: ok | Send: N28 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*33 | Recv: Error:No Checksum with line number, Last Line: 27 | Recv: Resend: 28 2022-01-18 12:28:22,126 - octoprint.util.comm - WARNING - Printer keeps requesting line 28 again and again, communication stuck 2022-01-18 12:28:22,127 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Error" 2022-01-18 12:28:22,133 - octoprint.util.comm - INFO - Force-sending M112 to the printer 2022-01-18 12:28:22,169 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2022-01-18 12:28:22,201 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2022-01-18 12:28:22,483 - octoprint.plugins.tracking - INFO - Sent tracking event commerror_resend_loop, payload: {'commerror_text': 'Printer keeps requesting line 28 again and again, communication stuck'} 2022-01-18 12:28:22,662 - octoprint.plugins.tracking - INFO - Sent tracking event print_failed, payload: {'origin': 'local', 'file': '73da9fe1157f6619f8666e1b02fb2b0562c691db', 'elapsed': 248, 'reason': 'error', 'commerror_text': 'Printer keeps requesting line 28 again and again, communication stuck'} 2022-01-18 12:28:22,679 - octoprint.util.comm - INFO - Firmware didn't send an 'ok' with their resend request. That's a known bug with some firmware variants out there. Simulating an ok to continue... 2022-01-18 12:29:17,958 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Opening serial connection" 2022-01-18 12:29:17,959 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200 2022-01-18 12:29:17,988 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial connection" to "Connecting" 2022-01-18 12:29:17,992 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 12:29:18,011 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 12:29:18,013 - octoprint.util.comm - INFO - Changing monitoring state from "Connecting" to "Operational" 2022-01-18 12:29:18,039 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 12:29:18,090 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin CR-6 community firmware - release 6.1 (based on Marlin 2.0.8.1) (Jun 4 2021 16:53:51)" 2022-01-18 12:29:18,099 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting 2022-01-18 12:29:18,118 - octoprint.util.comm - INFO - Firmware states that it supports emergency GCODEs to be sent without waiting for an acknowledgement first 2022-01-18 12:29:18,261 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {'firmware_name': 'Marlin CR-6 community firmware - release 6.1 (based on Marlin 2.0.8.1) (Jun 4 2021 16:53:51)', 'printer_port': '/dev/ttyUSB0', 'printer_baudrate': 115200} 2022-01-18 12:29:26,305 - octoprint.printer.standard.job - INFO - Print job selected - origin: local, path: CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode, owner: pi, user: pi 2022-01-18 12:29:26,314 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting" 2022-01-18 12:29:26,317 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode, owner: pi, user: pi 2022-01-18 12:29:26,349 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 12:29:26,372 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Printing" 2022-01-18 12:29:26,397 - octoprint.plugins.action_command_notification - INFO - Got a notification: Time Left 11h08m07s 2022-01-18 12:29:26,434 - octoprint.plugins.action_command_notification - INFO - Got a notification: Bed Heating... 2022-01-18 12:29:26,530 - octoprint.plugins.tracking - INFO - Sent tracking event print_started, payload: {'origin': 'local', 'file': '73da9fe1157f6619f8666e1b02fb2b0562c691db'} 2022-01-18 12:29:28,427 - octoprint.util.comm - INFO - Printer seems to support the busy protocol, will adjust timeouts and set busy interval accordingly 2022-01-18 12:30:24,604 - octoprint.plugins.action_command_notification - INFO - Got a notification: Printing... 2022-01-18 12:30:24,612 - octoprint.util.comm - INFO - Telling the printer to set the busy interval to our "communicationBusy" timeout - 1s = 2s 2022-01-18 12:30:58,658 - octoprint.util.comm - INFO - Cancelling job on behalf of user pi 2022-01-18 12:30:58,662 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Cancelling" 2022-01-18 12:30:58,665 - octoprint.util.comm - INFO - Force-sending M108 to the printer 2022-01-18 12:30:58,685 - octoprint.printer.standard.job - INFO - Print job cancelled - origin: local, path: CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode, owner: pi, user: pi 2022-01-18 12:30:58,858 - octoprint.plugins.action_command_notification - INFO - Got a notification: CR6Comm-Rel6.1 Ready. 2022-01-18 12:30:58,876 - octoprint.util.comm - INFO - Changing monitoring state from "Cancelling" to "Operational" 2022-01-18 12:30:58,933 - octoprint.plugins.tracking - INFO - Sent tracking event print_cancelled, payload: {'origin': 'local', 'file': '73da9fe1157f6619f8666e1b02fb2b0562c691db', 'elapsed': 92} 2022-01-18 12:30:59,075 - octoprint.plugins.tracking - INFO - Sent tracking event print_failed, payload: {'origin': 'local', 'file': '73da9fe1157f6619f8666e1b02fb2b0562c691db', 'elapsed': 92, 'reason': 'cancelled'} 2022-01-18 12:31:12,417 - octoprint.plugins.action_command_notification - INFO - Got a notification: Media Removed 2022-01-18 12:32:29,989 - octoprint.plugins.action_command_notification - INFO - Got a notification: Media Inserted 2022-01-18 12:34:47,671 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2022-01-18 12:34:56,529 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 1685, 'printer_state': 'OPERATIONAL'} 2022-01-18 12:35:29,131 - octoprint.plugins.action_command_notification - INFO - Got a notification: CR6Comm-Rel6.1 Ready. 2022-01-18 12:37:52,656 - octoprint.plugins.action_command_notification - INFO - Got a notification: CR6Comm-Rel6.1 Ready. 2022-01-18 12:40:34,266 - octoprint.plugins.action_command_notification - INFO - Got a notification: CR6Comm-Rel6.1 Ready. 2022-01-18 12:40:35,453 - octoprint.plugins.action_command_notification - INFO - Got a notification: Settings Stored 2022-01-18 12:41:08,640 - octoprint.util.comm - INFO - Starting job on behalf of user pi 2022-01-18 12:41:08,647 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting" 2022-01-18 12:41:08,655 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode, owner: pi, user: pi 2022-01-18 12:41:08,707 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 12:41:08,726 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Printing" 2022-01-18 12:41:08,757 - octoprint.plugins.action_command_notification - INFO - Got a notification: Time Left 11h08m07s 2022-01-18 12:41:08,799 - octoprint.plugins.action_command_notification - INFO - Got a notification: Bed Cooling... 2022-01-18 12:41:08,807 - octoprint.plugins.action_command_notification - INFO - Got a notification: Printing... 2022-01-18 12:41:08,922 - octoprint.plugins.tracking - INFO - Sent tracking event print_started, payload: {'origin': 'local', 'file': '73da9fe1157f6619f8666e1b02fb2b0562c691db'} 2022-01-18 12:41:22,366 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2022-01-18 12:41:23,036 - octoprint.plugins.action_command_notification - INFO - Got a notification: Printing... 2022-01-18 12:41:28,926 - octoprint.plugins.action_command_notification - INFO - Got a notification: Printing... 2022-01-18 12:41:49,222 - octoprint.plugins.action_command_notification - INFO - Got a notification: Waiting for heat-up... 2022-01-18 12:42:31,037 - octoprint.plugins.action_command_notification - INFO - Got a notification: Printing... 2022-01-18 12:42:31,046 - octoprint.plugins.action_command_notification - INFO - Got a notification: Bed Heating... 2022-01-18 12:42:44,391 - octoprint.plugins.action_command_notification - INFO - Got a notification: Printing... 2022-01-18 12:42:44,402 - octoprint.plugins.action_command_notification - INFO - Got a notification: Printing... 2022-01-18 12:42:56,207 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 28, current line = 29 | Last lines in terminal: | Recv: T:245.00 /245.00 B:79.97 /80.00 @:79 B@:45 | Recv: echo:busy: processing | Recv: T:245.00 /245.00 B:79.94 /80.00 @:78 B@:52 | Recv: ok | Send: N23 G92 E0*118 | Recv: X:10.4000 Y:20.0000 Z:0.2800 E:0.0000 Count X:832 Y:13600 Z:161 | Recv: ok | Send: N24 G1 Z2.0 F3000*45 | Recv: ok | Send: N25 G92 E0*112 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13188 Z:163 | Recv: ok | Send: N26 G92 E0*115 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13162 Z:163 | Recv: ok | Send: N27 G1 F3000 E-6.5*29 | Recv: ok | Send: N28 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*33 | Recv: Error:No Checksum with line number, Last Line: 27 | Recv: Resend: 28 2022-01-18 12:42:56,239 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 28, current line = 29 | Last lines in terminal: | Send: N23 G92 E0*118 | Recv: X:10.4000 Y:20.0000 Z:0.2800 E:0.0000 Count X:832 Y:13600 Z:161 | Recv: ok | Send: N24 G1 Z2.0 F3000*45 | Recv: ok | Send: N25 G92 E0*112 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13188 Z:163 | Recv: ok | Send: N26 G92 E0*115 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13162 Z:163 | Recv: ok | Send: N27 G1 F3000 E-6.5*29 | Recv: ok | Send: N28 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*33 | Recv: Error:No Checksum with line number, Last Line: 27 | Recv: Resend: 28 | Recv: ok | Send: N28 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*33 | Recv: Error:No Checksum with line number, Last Line: 27 | Recv: Resend: 28 2022-01-18 12:42:56,273 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 28, current line = 29 | Last lines in terminal: | Recv: ok | Send: N25 G92 E0*112 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13188 Z:163 | Recv: ok | Send: N26 G92 E0*115 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13162 Z:163 | Recv: ok | Send: N27 G1 F3000 E-6.5*29 | Recv: ok | Send: N28 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*33 | Recv: Error:No Checksum with line number, Last Line: 27 | Recv: Resend: 28 | Recv: ok | Send: N28 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*33 | Recv: Error:No Checksum with line number, Last Line: 27 | Recv: Resend: 28 | Recv: ok | Send: N28 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*33 | Recv: Error:No Checksum with line number, Last Line: 27 | Recv: Resend: 28 2022-01-18 12:42:56,302 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 28, current line = 29 | Last lines in terminal: | Send: N26 G92 E0*115 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13162 Z:163 | Recv: ok | Send: N27 G1 F3000 E-6.5*29 | Recv: ok | Send: N28 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*33 | Recv: Error:No Checksum with line number, Last Line: 27 | Recv: Resend: 28 | Recv: ok | Send: N28 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*33 | Recv: Error:No Checksum with line number, Last Line: 27 | Recv: Resend: 28 | Recv: ok | Send: N28 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*33 | Recv: Error:No Checksum with line number, Last Line: 27 | Recv: Resend: 28 | Recv: ok | Send: N28 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*33 | Recv: Error:No Checksum with line number, Last Line: 27 | Recv: Resend: 28 2022-01-18 12:42:56,330 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 28, current line = 29 | Last lines in terminal: | Recv: ok | Send: N28 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*33 | Recv: Error:No Checksum with line number, Last Line: 27 | Recv: Resend: 28 | Recv: ok | Send: N28 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*33 | Recv: Error:No Checksum with line number, Last Line: 27 | Recv: Resend: 28 | Recv: ok | Send: N28 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*33 | Recv: Error:No Checksum with line number, Last Line: 27 | Recv: Resend: 28 | Recv: ok | Send: N28 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*33 | Recv: Error:No Checksum with line number, Last Line: 27 | Recv: Resend: 28 | Recv: ok | Send: N28 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*33 | Recv: Error:No Checksum with line number, Last Line: 27 | Recv: Resend: 28 2022-01-18 12:42:56,490 - octoprint.util.comm - WARNING - Printer keeps requesting line 28 again and again, communication stuck 2022-01-18 12:42:56,490 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Error" 2022-01-18 12:42:56,497 - octoprint.util.comm - INFO - Force-sending M112 to the printer 2022-01-18 12:42:56,535 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2022-01-18 12:42:56,600 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2022-01-18 12:42:57,045 - octoprint.util.comm - INFO - Firmware didn't send an 'ok' with their resend request. That's a known bug with some firmware variants out there. Simulating an ok to continue... 2022-01-18 12:48:51,090 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Opening serial connection" 2022-01-18 12:48:51,093 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200 2022-01-18 12:48:51,121 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial connection" to "Connecting" 2022-01-18 12:48:51,123 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 12:48:52,705 - octoprint.util.comm - INFO - Printer seems to support the busy protocol, will adjust timeouts and set busy interval accordingly 2022-01-18 12:49:40,308 - octoprint.server.api.system - INFO - Performing command for core:restart: sudo service octoprint restart 2022-01-18 12:49:41,727 - octoprint.startup - INFO - ****************************************************************************** 2022-01-18 12:49:41,729 - octoprint.startup - INFO - Starting OctoPrint 1.7.2 2022-01-18 12:49:41,730 - octoprint.startup - INFO - ****************************************************************************** 2022-01-18 12:49:41,990 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity changed from offline to online 2022-01-18 12:49:42,095 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: online 2022-01-18 12:49:42,095 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 8.8.8.8:53 is working 2022-01-18 12:49:42,095 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is working 2022-01-18 12:49:42,265 - octoprint.startup - INFO - Blacklist processing done, adding 3 blacklisted plugin versions: roomtemp (any), GcodeEditor (>=0.1.1,<=0.2.8), gcodeleveling (>=0.1.0,<=0.1.1) 2022-01-18 12:49:42,265 - octoprint.plugin.core - WARNING - Invalid version requirement >=0.1.1,<=0.2.8 for blacklist entry GcodeEditor, ignoring 2022-01-18 12:49:42,265 - octoprint.plugin.core - WARNING - Invalid version requirement >=0.1.0,<=0.1.1 for blacklist entry gcodeleveling, ignoring 2022-01-18 12:49:42,291 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2022-01-18 12:49:43,081 - octoprint.plugin.core - INFO - Found 18 plugin(s) providing 18 mixin implementations, 38 hook handlers 2022-01-18 12:49:43,146 - octoprint.server.heartbeat - INFO - Starting server heartbeat, 900.0s interval 2022-01-18 12:49:43,162 - octoprint.server - INFO - Intermediary server started 2022-01-18 12:49:43,174 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/pi/.octoprint/uploads... 2022-01-18 12:49:43,189 - octoprint.filemanager.storage - INFO - ... file metadata for /home/pi/.octoprint/uploads initialized successfully. 2022-01-18 12:49:43,192 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_SHOW (needs: "Need(method='role', value='plugin_action_command_notification_show')") 2022-01-18 12:49:43,192 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_CLEAR (needs: "Need(method='role', value='plugin_action_command_notification_clear')") 2022-01-18 12:49:43,193 - octoprint.server - INFO - Added new permission from plugin action_command_prompt: PLUGIN_ACTION_COMMAND_PROMPT_INTERACT (needs: "Need(method='role', value='plugin_action_command_prompt_interact')") 2022-01-18 12:49:43,193 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_READ (needs: "Need(method='role', value='plugin_announcements_read')") 2022-01-18 12:49:43,193 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_MANAGE (needs: "Need(method='role', value='plugin_announcements_read'), Need(method='role', value='plugin_announcements_manage')") 2022-01-18 12:49:43,194 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_ADMIN (needs: "Need(method='role', value='plugin_appkeys_admin')") 2022-01-18 12:49:43,194 - octoprint.server - INFO - Added new permission from plugin backup: PLUGIN_BACKUP_ACCESS (needs: "Need(method='role', value='plugin_backup_access')") 2022-01-18 12:49:43,194 - octoprint.server - INFO - Added new permission from plugin firmware_check: PLUGIN_FIRMWARE_CHECK_DISPLAY (needs: "Need(method='role', value='plugin_firmware_check_display')") 2022-01-18 12:49:43,194 - octoprint.server - INFO - Added new permission from plugin logging: PLUGIN_LOGGING_MANAGE (needs: "Need(method='role', value='plugin_logging_manage')") 2022-01-18 12:49:43,195 - octoprint.server - INFO - Added new permission from plugin pi_support: PLUGIN_PI_SUPPORT_STATUS (needs: "Need(method='role', value='plugin_pi_support_check')") 2022-01-18 12:49:43,195 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_MANAGE (needs: "Need(method='role', value='plugin_pluginmanager_manage')") 2022-01-18 12:49:43,195 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_INSTALL (needs: "Need(method='role', value='plugin_pluginmanager_install'), Need(method='role', value='plugin_pluginmanager_manage')") 2022-01-18 12:49:43,196 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CHECK (needs: "Need(method='role', value='plugin_softwareupdate_check')") 2022-01-18 12:49:43,196 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_UPDATE (needs: "Need(method='role', value='plugin_softwareupdate_update')") 2022-01-18 12:49:43,196 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CONFIGURE (needs: "Need(method='role', value='plugin_softwareupdate_configure')") 2022-01-18 12:49:43,936 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2022-01-18 12:49:44,639 - octoprint.util.pip - INFO - Version of pip is 21.3.1 2022-01-18 12:49:44,641 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-01-18 12:49:44,642 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-01-18 12:49:44,677 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk 2022-01-18 12:49:44,717 - octoprint.plugin.core - INFO - Initialized 18 plugin implementation(s) 2022-01-18 12:49:44,722 - octoprint.plugin.core - INFO - 18 plugin(s) registered with the system: | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/appkeys | Backup & Restore (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/backup | Core Wizard (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/corewizard | Discovery (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/discovery | Error Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/errortracking | Event Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/eventmanager | File Check (2021.2.23) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_file_check | Firmware Check (2021.10.11) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmware_check | GCode Viewer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/gcodeviewer | Logging (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/logging | Pi Support Plugin (2021.10.28) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/pluginmanager | Software Update (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/softwareupdate | Virtual Printer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2022-01-18 12:49:44,744 - octoprint.environment - INFO - Detected environment is Python 3.9.2 under Linux (linux). Details: | hardware: | cores: 4 | freq: 1800.0 | ram: 1909063680 | os: | bits: 32 | id: linux | platform: linux | plugins: | pi_support: | model: Raspberry Pi 4 Model B Rev 1.5 | octopi_version: 1.0.0 | throttle_state: '0x0' | python: | pip: 21.3.1 | version: 3.9.2 | virtualenv: /home/pi/oprint 2022-01-18 12:49:44,752 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/webassets... 2022-01-18 12:49:44,767 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-cache... 2022-01-18 12:49:45,137 - octoprint.server - INFO - Shutting down intermediary server... 2022-01-18 12:49:45,473 - octoprint.server - INFO - Intermediary server shut down 2022-01-18 12:49:45,474 - octoprint.events - INFO - Processing startup event, this is our first event 2022-01-18 12:49:45,475 - octoprint.events - INFO - Adding 2 events to queue that were held back before startup event 2022-01-18 12:49:45,475 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue... 2022-01-18 12:49:45,488 - octoprint.server - INFO - Autoconnect on startup is configured, trying to connect to the printer... 2022-01-18 12:49:45,489 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json 2022-01-18 12:49:45,501 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue 2022-01-18 12:49:45,520 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2022-01-18 12:49:45,770 - octoprint.plugins.tracking - INFO - Sent tracking event system_unthrottled, payload: {'throttled_now': False, 'throttled_past': False, 'throttled_mask': 0, 'throttled_voltage_now': False, 'throttled_voltage_past': False, 'throttled_overheat_now': False, 'throttled_overheat_past': False} 2022-01-18 12:49:45,948 - octoprint.server - INFO - Trying to connect to configured serial port AUTO 2022-01-18 12:49:46,159 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2022-01-18 12:49:46,215 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder... 2022-01-18 12:49:46,233 - octoprint.server.util.watchdog - INFO - ... initial scan done. 2022-01-18 12:49:46,499 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2022-01-18 12:49:46,508 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 7 port/baudrate candidates: /dev/ttyUSB0@115200, /dev/ttyUSB0@250000, /dev/ttyUSB0@230400, /dev/ttyUSB0@57600, /dev/ttyUSB0@38400, /dev/ttyUSB0@19200, /dev/ttyUSB0@9600 2022-01-18 12:49:46,509 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200 2022-01-18 12:49:46,509 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200 2022-01-18 12:49:46,543 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-18 12:49:46,547 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 12:49:47,097 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on raspberrypi._http._tcp.local.' for _http._tcp.local. 2022-01-18 12:49:47,236 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2022-01-18 12:49:47,237 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-01-18 12:49:47,238 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-01-18 12:49:47,256 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk 2022-01-18 12:49:47,759 - octoprint.util.comm - INFO - Printer seems to support the busy protocol, will adjust timeouts and set busy interval accordingly 2022-01-18 12:49:47,908 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on raspberrypi._octoprint._tcp.local.' for _octoprint._tcp.local. 2022-01-18 12:49:47,913 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance on raspberrypi for SSDP 2022-01-18 12:49:47,959 - octoprint.server - INFO - Listening on http://127.0.0.1:5000 2022-01-18 12:49:48,061 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2022-01-18 12:49:48,194 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.71 2022-01-18 12:49:48,404 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 12:49:48,404 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 12:49:48,727 - octoprint.server.util.sockjs - INFO - User pi logged in on the socket from client ::ffff:192.168.1.71 2022-01-18 12:49:48,891 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2022-01-18 12:49:48,897 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-01-18 12:49:48,897 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-01-18 12:49:48,971 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 11.8GB. That is considered sufficient for updating. 2022-01-18 12:49:49,161 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2022-01-18 12:49:49,272 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'http://192.168.1.76/', 'path': '/', 'query_string': 'l10n=en'} 2022-01-18 12:49:49,436 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 6, 'printer_state': 'DETECT_SERIAL'} 2022-01-18 12:49:49,646 - octoprint.plugins.tracking - INFO - Sent tracking event pong, payload: {'version': '1.7.2', 'os': 'linux', 'bits': 32, 'python': '3.9.2', 'pip': '21.3.1', 'cores': 4, 'freq': 1800.0, 'ram': 1909063680, 'pi_model': 'Raspberry Pi 4 Model B Rev 1.5', 'octopi_version': '1.0.0', 'plugins': ''} 2022-01-18 12:49:49,824 - octoprint.plugins.tracking - INFO - Sent tracking event startup, payload: {'version': '1.7.2', 'os': 'linux', 'bits': 32, 'python': '3.9.2', 'pip': '21.3.1', 'cores': 4, 'freq': 1800.0, 'ram': 1909063680, 'pi_model': 'Raspberry Pi 4 Model B Rev 1.5', 'octopi_version': '1.0.0'} 2022-01-18 12:49:50,207 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 12:49:50,207 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 12:49:55,760 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2022-01-18 12:49:55,765 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 12:49:57,559 - octoprint.server.preemptive_cache - INFO - ... done in 8.29s 2022-01-18 12:49:57,596 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.71 2022-01-18 12:49:59,136 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.71 2022-01-18 12:49:59,195 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 12:49:59,196 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 12:50:00,172 - octoprint.server.util.sockjs - INFO - User pi logged in on the socket from client ::ffff:192.168.1.71 2022-01-18 12:50:00,813 - octoprint.plugins.tracking - INFO - Sent tracking event webui_load, payload: {'browser_name': 'Chrome', 'browser_version': '97.0.4692.71', 'os_name': 'Windows', 'os_version': '10'} 2022-01-18 12:50:12,382 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2022-01-18 12:50:12,389 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 12:50:16,911 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 250000 2022-01-18 12:50:16,922 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-18 12:50:16,925 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 12:50:20,602 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2022-01-18 12:50:20,610 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 12:50:22,728 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2022-01-18 12:50:22,735 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 12:50:24,902 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 230400 2022-01-18 12:50:24,906 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-18 12:50:24,908 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 12:50:28,902 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2022-01-18 12:50:28,908 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 12:50:31,260 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2022-01-18 12:50:31,267 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 12:50:34,902 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 57600 2022-01-18 12:50:34,905 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-18 12:50:34,912 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 12:50:38,904 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2022-01-18 12:50:38,913 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 12:50:40,119 - octoprint.util.comm - WARNING - Received line: 2022-01-18 12:50:40,120 - octoprint.util.comm - WARNING - | ææàþàf~æþ\x00øææøæøæøþ†\x00æ~\x00ø˜øþ\x00øžàÆx€àøæàæ>ø\x00àø\x00\x00æx\x00xæø\x00žæ\x00x†>>æžþ\x0088€ææàþžàæþæ†þ\x00øæžfxæøæžø>þàƀ†øæøþøææø\x00Àf€†øføþ†øæ8æø\x00\x00øæžfxþæøþþ†þæþþþæþþ\x00øþžþæàþæææøþæææxæøþæ~þþfþæ€\x00fæàžþžàæþf†þ\x008øæžæøæøæžø~ææàþàf~æþ\x00øææøæøæøþ†`f€†øfžøž~†øæžfx˜€`f€†øfžøž~†øæžfx˜€\x00†øæžfxþfxþž~†žþf~þžþfþ†~\x00xþžþfàžþžææfžøž~æfžæžxfxþf~þžþfþf€˜€fæàžþž˜àf~f†~\x00†øæžfxæøfžøž~†fæàžþž˜àf~f†~\x00†øæžfxæøfžøž~†€f~\x00˜xž˜x†~\x00xž˜†ž`fx€˜à˜xž˜æàæžøž\x00˜à˜x˜€€fx\x00˜x†x\x00žf†\x00†˜æ˜˜€fæàžþž˜àf~f†~\x00†øæžfxæøfžøž~†`f€†øfžøž~†øæžfx˜€`f€†øfžøž~†øæžfx˜€\x00†øæžfxþfxþž~†žþf~þžþfþ†~\x00xþžþfàžþžææfžøž~æfžæžxfxþf~þžþfþf€˜€fæàžþž˜àf~f†~\x00†øæžfxæøfžøž~†fæàžþž˜àf~f†~\x00†øæžfxæøfžøž~†Ÿž½„¾¼øŸž½È¾¼øμåý¿N¨¬9½¿¿~øgŠ1¾!)½øgŠ1¾!)½øNXˆ 2022-01-18 12:50:40,120 - octoprint.util.comm - WARNING - The received line contains at least one null byte character at position 16, this hints at some data corruption going on 2022-01-18 12:50:42,244 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2022-01-18 12:50:42,251 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 12:50:44,903 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 38400 2022-01-18 12:50:44,907 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-18 12:50:44,914 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 12:50:48,903 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2022-01-18 12:50:48,906 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 12:50:51,087 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2022-01-18 12:50:51,095 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 12:50:54,458 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 19200 2022-01-18 12:50:54,460 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-18 12:50:54,469 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 12:50:57,365 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2022-01-18 12:50:57,373 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 12:50:59,373 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2022-01-18 12:50:59,381 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 12:51:01,382 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 9600 2022-01-18 12:51:01,387 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-18 12:51:01,394 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 12:51:03,392 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2022-01-18 12:51:03,399 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 12:51:05,397 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2022-01-18 12:51:05,405 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 12:51:07,406 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Error" 2022-01-18 12:51:07,421 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2022-01-18 12:51:07,485 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2022-01-18 12:51:07,645 - octoprint.plugins.tracking - INFO - Sent tracking event commerror_autodetect, payload: {'commerror_text': 'No more candidates to test, and no working port/baudrate combination detected.'} 2022-01-18 12:51:16,064 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Opening serial connection" 2022-01-18 12:51:16,066 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200 2022-01-18 12:51:16,102 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial connection" to "Connecting" 2022-01-18 12:51:16,105 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 12:51:16,116 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 12:51:16,122 - octoprint.util.comm - INFO - Changing monitoring state from "Connecting" to "Operational" 2022-01-18 12:51:16,134 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 12:51:16,184 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin CR-6 community firmware - release 6.1 (based on Marlin 2.0.8.1) (Jun 4 2021 16:53:51)" 2022-01-18 12:51:16,198 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting 2022-01-18 12:51:16,206 - octoprint.util.comm - INFO - Firmware states that it supports emergency GCODEs to be sent without waiting for an acknowledgement first 2022-01-18 12:51:16,393 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {'firmware_name': 'Marlin CR-6 community firmware - release 6.1 (based on Marlin 2.0.8.1) (Jun 4 2021 16:53:51)', 'printer_port': '/dev/ttyUSB0', 'printer_baudrate': 115200} 2022-01-18 12:51:44,710 - octoprint.printer.standard.job - INFO - Print job selected - origin: local, path: CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode, owner: pi, user: pi 2022-01-18 12:51:44,725 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting" 2022-01-18 12:51:44,731 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode, owner: pi, user: pi 2022-01-18 12:51:44,772 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 12:51:44,792 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Printing" 2022-01-18 12:51:44,818 - octoprint.plugins.action_command_notification - INFO - Got a notification: Time Left 11h08m07s 2022-01-18 12:51:44,868 - octoprint.plugins.action_command_notification - INFO - Got a notification: Bed Cooling... 2022-01-18 12:51:44,872 - octoprint.plugins.action_command_notification - INFO - Got a notification: Printing... 2022-01-18 12:51:44,925 - octoprint.plugins.action_command_notification - INFO - Got a notification: Printing... 2022-01-18 12:51:44,970 - octoprint.plugins.tracking - INFO - Sent tracking event print_started, payload: {'origin': 'local', 'file': '73da9fe1157f6619f8666e1b02fb2b0562c691db'} 2022-01-18 12:51:46,987 - octoprint.util.comm - INFO - Printer seems to support the busy protocol, will adjust timeouts and set busy interval accordingly 2022-01-18 12:52:10,965 - octoprint.plugins.action_command_notification - INFO - Got a notification: Waiting for heat-up... 2022-01-18 12:52:51,910 - octoprint.plugins.action_command_notification - INFO - Got a notification: Printing... 2022-01-18 12:52:51,930 - octoprint.util.comm - INFO - Telling the printer to set the busy interval to our "communicationBusy" timeout - 1s = 2s 2022-01-18 12:53:03,717 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 29, current line = 30 | Last lines in terminal: | Recv: T:245.23 /245.00 B:79.94 /80.00 @:78 B@:47 | Recv: echo:busy: processing | Recv: T:246.02 /245.00 B:79.93 /80.00 @:69 B@:49 | Recv: ok | Send: N24 G92 E0*113 | Recv: X:10.4000 Y:20.0000 Z:0.2800 E:0.0000 Count X:832 Y:13600 Z:174 | Recv: ok | Send: N25 G1 Z2.0 F3000*44 | Recv: ok | Send: N26 G92 E0*115 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13187 Z:177 | Recv: ok | Send: N27 G92 E0*114 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13159 Z:177 | Recv: ok | Send: N28 G1 F3000 E-6.5*18 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 2022-01-18 12:53:03,749 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 29, current line = 30 | Last lines in terminal: | Send: N24 G92 E0*113 | Recv: X:10.4000 Y:20.0000 Z:0.2800 E:0.0000 Count X:832 Y:13600 Z:174 | Recv: ok | Send: N25 G1 Z2.0 F3000*44 | Recv: ok | Send: N26 G92 E0*115 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13187 Z:177 | Recv: ok | Send: N27 G92 E0*114 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13159 Z:177 | Recv: ok | Send: N28 G1 F3000 E-6.5*18 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 2022-01-18 12:53:03,778 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 29, current line = 30 | Last lines in terminal: | Recv: ok | Send: N26 G92 E0*115 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13187 Z:177 | Recv: ok | Send: N27 G92 E0*114 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13159 Z:177 | Recv: ok | Send: N28 G1 F3000 E-6.5*18 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 2022-01-18 12:53:03,807 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 29, current line = 30 | Last lines in terminal: | Send: N27 G92 E0*114 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13159 Z:177 | Recv: ok | Send: N28 G1 F3000 E-6.5*18 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 2022-01-18 12:53:03,836 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 29, current line = 30 | Last lines in terminal: | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 2022-01-18 12:53:03,997 - octoprint.util.comm - WARNING - Printer keeps requesting line 29 again and again, communication stuck 2022-01-18 12:53:03,997 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Error" 2022-01-18 12:53:04,002 - octoprint.util.comm - INFO - Force-sending M112 to the printer 2022-01-18 12:53:04,031 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2022-01-18 12:53:04,056 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2022-01-18 12:53:04,536 - octoprint.util.comm - INFO - Firmware didn't send an 'ok' with their resend request. That's a known bug with some firmware variants out there. Simulating an ok to continue... 2022-01-18 13:04:43,148 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2022-01-18 13:04:49,407 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 906, 'printer_state': 'OFFLINE'} 2022-01-18 13:06:04,381 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Opening serial connection" 2022-01-18 13:06:04,382 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200 2022-01-18 13:06:04,405 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial connection" to "Connecting" 2022-01-18 13:06:04,408 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 13:06:04,419 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 13:06:04,421 - octoprint.util.comm - INFO - Changing monitoring state from "Connecting" to "Operational" 2022-01-18 13:06:04,434 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 13:06:04,488 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin CR-6 community firmware - release 6.1 (based on Marlin 2.0.8.1) (Jun 4 2021 16:53:51)" 2022-01-18 13:06:04,498 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting 2022-01-18 13:06:04,516 - octoprint.util.comm - INFO - Firmware states that it supports emergency GCODEs to be sent without waiting for an acknowledgement first 2022-01-18 13:06:04,685 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {'firmware_name': 'Marlin CR-6 community firmware - release 6.1 (based on Marlin 2.0.8.1) (Jun 4 2021 16:53:51)', 'printer_port': '/dev/ttyUSB0', 'printer_baudrate': 115200} 2022-01-18 13:06:09,111 - octoprint.printer.standard.job - INFO - Print job selected - origin: local, path: CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode, owner: pi, user: pi 2022-01-18 13:06:09,124 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting" 2022-01-18 13:06:09,131 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode, owner: pi, user: pi 2022-01-18 13:06:09,176 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 13:06:09,194 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Printing" 2022-01-18 13:06:09,221 - octoprint.plugins.action_command_notification - INFO - Got a notification: Time Left 11h08m07s 2022-01-18 13:06:09,260 - octoprint.plugins.action_command_notification - INFO - Got a notification: Bed Cooling... 2022-01-18 13:06:09,377 - octoprint.plugins.tracking - INFO - Sent tracking event print_started, payload: {'origin': 'local', 'file': '73da9fe1157f6619f8666e1b02fb2b0562c691db'} 2022-01-18 13:06:11,253 - octoprint.util.comm - INFO - Printer seems to support the busy protocol, will adjust timeouts and set busy interval accordingly 2022-01-18 13:06:22,602 - octoprint.plugins.action_command_notification - INFO - Got a notification: Printing... 2022-01-18 13:06:22,611 - octoprint.util.comm - INFO - Telling the printer to set the busy interval to our "communicationBusy" timeout - 1s = 2s 2022-01-18 13:06:35,986 - octoprint.plugins.action_command_notification - INFO - Got a notification: Printing... 2022-01-18 13:07:02,007 - octoprint.plugins.action_command_notification - INFO - Got a notification: Waiting for heat-up... 2022-01-18 13:07:42,418 - octoprint.plugins.action_command_notification - INFO - Got a notification: Printing... 2022-01-18 13:07:42,430 - octoprint.plugins.action_command_notification - INFO - Got a notification: Bed Heating... 2022-01-18 13:07:55,774 - octoprint.plugins.action_command_notification - INFO - Got a notification: Printing... 2022-01-18 13:07:55,785 - octoprint.plugins.action_command_notification - INFO - Got a notification: Printing... 2022-01-18 13:08:07,589 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 29, current line = 30 | Last lines in terminal: | Recv: T:245.00 /245.00 B:79.95 /80.00 @:80 B@:49 | Recv: echo:busy: processing | Recv: T:245.00 /245.00 B:80.00 /80.00 @:79 B@:38 | Recv: ok | Send: N24 G92 E0*113 | Recv: X:10.4000 Y:20.0000 Z:0.2800 E:0.0000 Count X:832 Y:13600 Z:175 | Recv: ok | Send: N25 G1 Z2.0 F3000*44 | Recv: ok | Send: N26 G92 E0*115 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13188 Z:177 | Recv: ok | Send: N27 G92 E0*114 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13163 Z:177 | Recv: ok | Send: N28 G1 F3000 E-6.5*18 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 2022-01-18 13:08:07,620 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 29, current line = 30 | Last lines in terminal: | Send: N24 G92 E0*113 | Recv: X:10.4000 Y:20.0000 Z:0.2800 E:0.0000 Count X:832 Y:13600 Z:175 | Recv: ok | Send: N25 G1 Z2.0 F3000*44 | Recv: ok | Send: N26 G92 E0*115 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13188 Z:177 | Recv: ok | Send: N27 G92 E0*114 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13163 Z:177 | Recv: ok | Send: N28 G1 F3000 E-6.5*18 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 2022-01-18 13:08:07,650 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 29, current line = 30 | Last lines in terminal: | Recv: ok | Send: N26 G92 E0*115 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13188 Z:177 | Recv: ok | Send: N27 G92 E0*114 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13163 Z:177 | Recv: ok | Send: N28 G1 F3000 E-6.5*18 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 2022-01-18 13:08:07,680 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 29, current line = 30 | Last lines in terminal: | Send: N27 G92 E0*114 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13163 Z:177 | Recv: ok | Send: N28 G1 F3000 E-6.5*18 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 2022-01-18 13:08:07,709 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 29, current line = 30 | Last lines in terminal: | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 2022-01-18 13:08:07,867 - octoprint.util.comm - WARNING - Printer keeps requesting line 29 again and again, communication stuck 2022-01-18 13:08:07,868 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Error" 2022-01-18 13:08:07,874 - octoprint.util.comm - INFO - Force-sending M112 to the printer 2022-01-18 13:08:07,915 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2022-01-18 13:08:07,940 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2022-01-18 13:08:08,420 - octoprint.util.comm - INFO - Firmware didn't send an 'ok' with their resend request. That's a known bug with some firmware variants out there. Simulating an ok to continue... 2022-01-18 13:14:28,761 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.65 2022-01-18 13:14:28,779 - octoprint.server.util.flask - INFO - Passively logging in user _api from ::ffff:192.168.1.65 2022-01-18 13:14:28,780 - octoprint.access.users - INFO - Logged in user: _api 2022-01-18 13:14:28,819 - octoprint.server.util.sockjs - INFO - User _api logged in on the socket from client ::ffff:192.168.1.65 2022-01-18 13:14:33,125 - octoprint.plugins.pluginmanager - INFO - Installing plugin from https://github.com/jneilliii/OctoPrint-BedLevelVisualizer/archive/master.zip 2022-01-18 13:14:40,437 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2022-01-18 13:14:40,560 - octoprint.plugin.core - INFO - Found 19 plugin(s) providing 18 mixin implementations, 38 hook handlers 2022-01-18 13:14:40,561 - octoprint.plugin.core - INFO - 19 plugin(s) registered with the system: | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/appkeys | Backup & Restore (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/backup | !Bed Visualizer (1.1.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_bedlevelvisualizer | Core Wizard (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/corewizard | Discovery (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/discovery | Error Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/errortracking | Event Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/eventmanager | File Check (2021.2.23) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_file_check | Firmware Check (2021.10.11) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmware_check | GCode Viewer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/gcodeviewer | Logging (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/logging | Pi Support Plugin (2021.10.28) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/pluginmanager | Software Update (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/softwareupdate | Virtual Printer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2022-01-18 13:14:40,562 - octoprint.plugins.pluginmanager - INFO - The plugin was installed successfully: Bed Visualizer, version 1.1.1 2022-01-18 13:14:40,714 - octoprint.plugins.tracking - INFO - Sent tracking event install_plugin, payload: {'plugin': 'bedlevelvisualizer', 'plugin_version': '1.1.1'} 2022-01-18 13:14:54,503 - octoprint.plugins.pluginmanager - INFO - Installing plugin from https://github.com/eyal0/OctoPrint-PrintTimeGenius/archive/master.zip 2022-01-18 13:15:00,573 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.65 2022-01-18 13:15:04,884 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2022-01-18 13:15:04,934 - octoprint.plugin.core - INFO - Found 20 plugin(s) providing 18 mixin implementations, 38 hook handlers 2022-01-18 13:15:04,936 - octoprint.plugin.core - INFO - 20 plugin(s) registered with the system: | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/appkeys | Backup & Restore (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/backup | !Bed Visualizer (1.1.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_bedlevelvisualizer | Core Wizard (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/corewizard | Discovery (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/discovery | Error Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/errortracking | Event Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/eventmanager | File Check (2021.2.23) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_file_check | Firmware Check (2021.10.11) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmware_check | GCode Viewer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/gcodeviewer | Logging (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/logging | Pi Support Plugin (2021.10.28) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/pluginmanager | !PrintTimeGenius Plugin (2.2.8) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_PrintTimeGenius | Software Update (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/softwareupdate | Virtual Printer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2022-01-18 13:15:04,936 - octoprint.plugins.pluginmanager - INFO - The plugin was installed successfully: PrintTimeGenius Plugin, version 2.2.8 2022-01-18 13:15:05,090 - octoprint.plugins.tracking - INFO - Sent tracking event install_plugin, payload: {'plugin': 'PrintTimeGenius', 'plugin_version': '2.2.8'} 2022-01-18 13:15:16,140 - octoprint.plugins.pluginmanager - INFO - Installing plugin from https://github.com/FormerLurker/Octolapse/archive/master.zip 2022-01-18 13:16:13,706 - octoprint.server.api.system - INFO - Performing command for core:restart: sudo service octoprint restart 2022-01-18 13:16:13,766 - octoprint.server.api.system - WARNING - Command for core:restart failed with return code -15: ! STDOUT: ! STDERR: 2022-01-18 13:16:15,888 - octoprint.startup - INFO - ****************************************************************************** 2022-01-18 13:16:15,890 - octoprint.startup - INFO - Starting OctoPrint 1.7.2 2022-01-18 13:16:15,890 - octoprint.startup - INFO - ****************************************************************************** 2022-01-18 13:16:16,149 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity changed from offline to online 2022-01-18 13:16:16,238 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: online 2022-01-18 13:16:16,238 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 8.8.8.8:53 is working 2022-01-18 13:16:16,239 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is working 2022-01-18 13:16:16,406 - octoprint.startup - INFO - Blacklist processing done, adding 3 blacklisted plugin versions: roomtemp (any), GcodeEditor (>=0.1.1,<=0.2.8), gcodeleveling (>=0.1.0,<=0.1.1) 2022-01-18 13:16:16,406 - octoprint.plugin.core - WARNING - Invalid version requirement >=0.1.1,<=0.2.8 for blacklist entry GcodeEditor, ignoring 2022-01-18 13:16:16,406 - octoprint.plugin.core - WARNING - Invalid version requirement >=0.1.0,<=0.1.1 for blacklist entry gcodeleveling, ignoring 2022-01-18 13:16:16,433 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2022-01-18 13:16:17,293 - octoprint.plugin.core - INFO - Found 20 plugin(s) providing 20 mixin implementations, 48 hook handlers 2022-01-18 13:16:17,344 - octoprint.server.heartbeat - INFO - Starting server heartbeat, 900.0s interval 2022-01-18 13:16:17,364 - octoprint.server - INFO - Intermediary server started 2022-01-18 13:16:17,378 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/pi/.octoprint/uploads... 2022-01-18 13:16:17,393 - octoprint.filemanager.storage - INFO - ... file metadata for /home/pi/.octoprint/uploads initialized successfully. 2022-01-18 13:16:17,396 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_SHOW (needs: "Need(method='role', value='plugin_action_command_notification_show')") 2022-01-18 13:16:17,396 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_CLEAR (needs: "Need(method='role', value='plugin_action_command_notification_clear')") 2022-01-18 13:16:17,396 - octoprint.server - INFO - Added new permission from plugin action_command_prompt: PLUGIN_ACTION_COMMAND_PROMPT_INTERACT (needs: "Need(method='role', value='plugin_action_command_prompt_interact')") 2022-01-18 13:16:17,397 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_READ (needs: "Need(method='role', value='plugin_announcements_read')") 2022-01-18 13:16:17,397 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_MANAGE (needs: "Need(method='role', value='plugin_announcements_manage'), Need(method='role', value='plugin_announcements_read')") 2022-01-18 13:16:17,397 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_ADMIN (needs: "Need(method='role', value='plugin_appkeys_admin')") 2022-01-18 13:16:17,397 - octoprint.server - INFO - Added new permission from plugin backup: PLUGIN_BACKUP_ACCESS (needs: "Need(method='role', value='plugin_backup_access')") 2022-01-18 13:16:17,398 - octoprint.server - INFO - Added new permission from plugin firmware_check: PLUGIN_FIRMWARE_CHECK_DISPLAY (needs: "Need(method='role', value='plugin_firmware_check_display')") 2022-01-18 13:16:17,398 - octoprint.server - INFO - Added new permission from plugin logging: PLUGIN_LOGGING_MANAGE (needs: "Need(method='role', value='plugin_logging_manage')") 2022-01-18 13:16:17,398 - octoprint.server - INFO - Added new permission from plugin pi_support: PLUGIN_PI_SUPPORT_STATUS (needs: "Need(method='role', value='plugin_pi_support_check')") 2022-01-18 13:16:17,398 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_MANAGE (needs: "Need(method='role', value='plugin_pluginmanager_manage')") 2022-01-18 13:16:17,399 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_INSTALL (needs: "Need(method='role', value='plugin_pluginmanager_manage'), Need(method='role', value='plugin_pluginmanager_install')") 2022-01-18 13:16:17,399 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CHECK (needs: "Need(method='role', value='plugin_softwareupdate_check')") 2022-01-18 13:16:17,399 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_UPDATE (needs: "Need(method='role', value='plugin_softwareupdate_update')") 2022-01-18 13:16:17,399 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CONFIGURE (needs: "Need(method='role', value='plugin_softwareupdate_configure')") 2022-01-18 13:16:17,408 - octoprint.printer.standard - INFO - Using print time estimator provided by PrintTimeGenius 2022-01-18 13:16:18,141 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2022-01-18 13:16:18,847 - octoprint.util.pip - INFO - Version of pip is 21.3.1 2022-01-18 13:16:18,848 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-01-18 13:16:18,849 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-01-18 13:16:18,883 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk 2022-01-18 13:16:18,938 - octoprint.plugin.core - INFO - Initialized 20 plugin implementation(s) 2022-01-18 13:16:18,943 - octoprint.plugins.bedlevelvisualizer - INFO - [] 2022-01-18 13:16:18,983 - octoprint.plugin.core - INFO - 20 plugin(s) registered with the system: | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/appkeys | Backup & Restore (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/backup | Bed Visualizer (1.1.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_bedlevelvisualizer | Core Wizard (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/corewizard | Discovery (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/discovery | Error Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/errortracking | Event Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/eventmanager | File Check (2021.2.23) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_file_check | Firmware Check (2021.10.11) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmware_check | GCode Viewer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/gcodeviewer | Logging (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/logging | Pi Support Plugin (2021.10.28) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/pluginmanager | PrintTimeGenius Plugin (2.2.8) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_PrintTimeGenius | Software Update (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/softwareupdate | Virtual Printer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2022-01-18 13:16:19,005 - octoprint.environment - INFO - Detected environment is Python 3.9.2 under Linux (linux). Details: | hardware: | cores: 4 | freq: 1800.0 | ram: 1909063680 | os: | bits: 32 | id: linux | platform: linux | plugins: | pi_support: | model: Raspberry Pi 4 Model B Rev 1.5 | octopi_version: 1.0.0 | throttle_state: '0x0' | python: | pip: 21.3.1 | version: 3.9.2 | virtualenv: /home/pi/oprint 2022-01-18 13:16:19,014 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/webassets... 2022-01-18 13:16:19,029 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-cache... 2022-01-18 13:16:19,424 - octoprint.server - INFO - Shutting down intermediary server... 2022-01-18 13:16:19,449 - octoprint.server - INFO - Intermediary server shut down 2022-01-18 13:16:19,451 - octoprint.events - INFO - Processing startup event, this is our first event 2022-01-18 13:16:19,451 - octoprint.events - INFO - Adding 2 events to queue that were held back before startup event 2022-01-18 13:16:19,459 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue... 2022-01-18 13:16:19,470 - octoprint.server - INFO - Autoconnect on startup is configured, trying to connect to the printer... 2022-01-18 13:16:19,490 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json 2022-01-18 13:16:19,490 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue 2022-01-18 13:16:19,491 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2022-01-18 13:16:19,785 - octoprint.plugins.tracking - INFO - Sent tracking event system_unthrottled, payload: {'throttled_now': False, 'throttled_past': False, 'throttled_mask': 0, 'throttled_voltage_now': False, 'throttled_voltage_past': False, 'throttled_overheat_now': False, 'throttled_overheat_past': False} 2022-01-18 13:16:19,953 - octoprint.server - INFO - Trying to connect to configured serial port AUTO 2022-01-18 13:16:20,023 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2022-01-18 13:16:20,072 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder... 2022-01-18 13:16:20,162 - octoprint.server.util.watchdog - INFO - ... initial scan done. 2022-01-18 13:16:20,380 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 7 port/baudrate candidates: /dev/ttyUSB0@115200, /dev/ttyUSB0@250000, /dev/ttyUSB0@230400, /dev/ttyUSB0@57600, /dev/ttyUSB0@38400, /dev/ttyUSB0@19200, /dev/ttyUSB0@9600 2022-01-18 13:16:20,380 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200 2022-01-18 13:16:20,381 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200 2022-01-18 13:16:20,480 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-18 13:16:20,488 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 13:16:20,532 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2022-01-18 13:16:21,002 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on raspberrypi._http._tcp.local.' for _http._tcp.local. 2022-01-18 13:16:21,145 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2022-01-18 13:16:21,146 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-01-18 13:16:21,146 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-01-18 13:16:21,171 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk 2022-01-18 13:16:21,812 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on raspberrypi._octoprint._tcp.local.' for _octoprint._tcp.local. 2022-01-18 13:16:21,824 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance on raspberrypi for SSDP 2022-01-18 13:16:21,838 - octoprint.server - INFO - Listening on http://127.0.0.1:5000 2022-01-18 13:16:21,961 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.71 2022-01-18 13:16:21,964 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2022-01-18 13:16:22,054 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 13:16:22,054 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 13:16:22,493 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2022-01-18 13:16:22,495 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 13:16:22,740 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2022-01-18 13:16:22,745 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-01-18 13:16:22,746 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-01-18 13:16:22,775 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 11.7GB. That is considered sufficient for updating. 2022-01-18 13:16:23,063 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2022-01-18 13:16:23,165 - octoprint.server.util.sockjs - INFO - User pi logged in on the socket from client ::ffff:192.168.1.71 2022-01-18 13:16:23,632 - octoprint.plugins.bedlevelvisualizer - INFO - OctoPrint-BedLevelVisualizer loaded! 2022-01-18 13:16:23,694 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'http://192.168.1.76/', 'path': '/', 'query_string': 'l10n=en'} 2022-01-18 13:16:23,832 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 6, 'printer_state': 'DETECT_SERIAL'} 2022-01-18 13:16:24,262 - octoprint.plugins.tracking - INFO - Sent tracking event pong, payload: {'version': '1.7.2', 'os': 'linux', 'bits': 32, 'python': '3.9.2', 'pip': '21.3.1', 'cores': 4, 'freq': 1800.0, 'ram': 1909063680, 'pi_model': 'Raspberry Pi 4 Model B Rev 1.5', 'octopi_version': '1.0.0', 'plugins': 'printtimegenius:2.2.8,bedlevelvisualizer:1.1.1'} 2022-01-18 13:16:24,461 - octoprint.plugins.tracking - INFO - Sent tracking event startup, payload: {'version': '1.7.2', 'os': 'linux', 'bits': 32, 'python': '3.9.2', 'pip': '21.3.1', 'cores': 4, 'freq': 1800.0, 'ram': 1909063680, 'pi_model': 'Raspberry Pi 4 Model B Rev 1.5', 'octopi_version': '1.0.0'} 2022-01-18 13:16:24,501 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2022-01-18 13:16:24,509 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 13:16:26,510 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 250000 2022-01-18 13:16:26,516 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-18 13:16:26,518 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 13:16:27,842 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 13:16:27,843 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 13:16:28,524 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2022-01-18 13:16:28,541 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 13:16:30,534 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2022-01-18 13:16:30,577 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 13:16:31,389 - octoprint.server.preemptive_cache - INFO - ... done in 7.70s 2022-01-18 13:16:31,449 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.71 2022-01-18 13:16:32,123 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.71 2022-01-18 13:16:32,172 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 13:16:32,172 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 13:16:32,569 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 230400 2022-01-18 13:16:32,572 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-18 13:16:32,574 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 13:16:33,769 - octoprint.server.util.sockjs - INFO - User pi logged in on the socket from client ::ffff:192.168.1.71 2022-01-18 13:16:34,412 - octoprint.plugins.tracking - INFO - Sent tracking event webui_load, payload: {'browser_name': 'Chrome', 'browser_version': '97.0.4692.71', 'os_name': 'Windows', 'os_version': '10'} 2022-01-18 13:16:34,577 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2022-01-18 13:16:34,581 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 13:16:36,584 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2022-01-18 13:16:36,591 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 13:16:38,593 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 57600 2022-01-18 13:16:38,594 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-18 13:16:38,597 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 13:16:40,599 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2022-01-18 13:16:40,606 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 13:16:42,613 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2022-01-18 13:16:42,619 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 13:16:44,622 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 38400 2022-01-18 13:16:44,625 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-18 13:16:44,632 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 13:16:46,635 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2022-01-18 13:16:46,642 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 13:16:48,645 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2022-01-18 13:16:48,652 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 13:16:50,655 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 19200 2022-01-18 13:16:50,657 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-18 13:16:50,667 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 13:16:52,670 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2022-01-18 13:16:52,677 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 13:16:54,678 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2022-01-18 13:16:54,685 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 13:16:56,687 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 9600 2022-01-18 13:16:56,689 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-18 13:16:56,696 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 13:16:58,699 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2022-01-18 13:16:58,704 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 13:17:00,706 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2022-01-18 13:17:00,712 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 13:17:02,714 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Error" 2022-01-18 13:17:02,757 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2022-01-18 13:17:02,772 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2022-01-18 13:17:02,963 - octoprint.plugins.tracking - INFO - Sent tracking event commerror_autodetect, payload: {'commerror_text': 'No more candidates to test, and no working port/baudrate combination detected.'} 2022-01-18 13:19:25,543 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.71 2022-01-18 13:19:25,565 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 13:19:25,565 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 13:19:25,592 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.71 2022-01-18 13:19:25,605 - octoprint.server.util.sockjs - INFO - User pi logged in on the socket from client ::ffff:192.168.1.71 2022-01-18 13:19:30,006 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.65 2022-01-18 13:19:30,045 - octoprint.server.util.flask - INFO - Passively logging in user _api from ::ffff:192.168.1.65 2022-01-18 13:19:30,046 - octoprint.access.users - INFO - Logged in user: _api 2022-01-18 13:19:30,080 - octoprint.server.util.sockjs - INFO - User _api logged in on the socket from client ::ffff:192.168.1.65 2022-01-18 13:19:32,660 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 13:19:32,661 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 13:19:32,766 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.71 2022-01-18 13:19:33,190 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.71 2022-01-18 13:19:33,206 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 13:19:33,206 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 13:19:33,737 - octoprint.server.util.sockjs - INFO - User pi logged in on the socket from client ::ffff:192.168.1.71 2022-01-18 13:19:34,665 - octoprint.plugins.tracking - INFO - Sent tracking event webui_load, payload: {'browser_name': 'Chrome', 'browser_version': '97.0.4692.71', 'os_name': 'Windows', 'os_version': '10'} 2022-01-18 13:19:59,930 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.65 2022-01-18 13:25:10,147 - octoprint.plugins.pluginmanager - INFO - Installing plugin from https://github.com/FormerLurker/Octolapse/archive/master.zip 2022-01-18 13:26:27,267 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2022-01-18 13:26:27,391 - octoprint.plugin.core - INFO - Found 21 plugin(s) providing 20 mixin implementations, 48 hook handlers 2022-01-18 13:26:27,393 - octoprint.plugin.core - INFO - 21 plugin(s) registered with the system: | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/appkeys | Backup & Restore (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/backup | Bed Visualizer (1.1.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_bedlevelvisualizer | Core Wizard (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/corewizard | Discovery (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/discovery | Error Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/errortracking | Event Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/eventmanager | File Check (2021.2.23) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_file_check | Firmware Check (2021.10.11) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmware_check | GCode Viewer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/gcodeviewer | Logging (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/logging | !Octolapse (0.4.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_octolapse | Pi Support Plugin (2021.10.28) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/pluginmanager | PrintTimeGenius Plugin (2.2.8) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_PrintTimeGenius | Software Update (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/softwareupdate | Virtual Printer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2022-01-18 13:26:27,393 - octoprint.plugins.pluginmanager - INFO - The plugin was installed successfully: Octolapse, version 0.4.1 2022-01-18 13:26:27,543 - octoprint.plugins.tracking - INFO - Sent tracking event install_plugin, payload: {'plugin': 'octolapse', 'plugin_version': '0.4.1'} 2022-01-18 13:26:35,098 - octoprint.plugins.pluginmanager - INFO - Installing plugin from https://github.com/FormerLurker/Octolapse/archive/master.zip 2022-01-18 13:28:59,215 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2022-01-18 13:28:59,246 - octoprint.plugin.core - INFO - Found 21 plugin(s) providing 20 mixin implementations, 48 hook handlers 2022-01-18 13:28:59,247 - octoprint.plugin.core - INFO - 21 plugin(s) registered with the system: | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/appkeys | Backup & Restore (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/backup | Bed Visualizer (1.1.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_bedlevelvisualizer | Core Wizard (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/corewizard | Discovery (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/discovery | Error Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/errortracking | Event Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/eventmanager | File Check (2021.2.23) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_file_check | Firmware Check (2021.10.11) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmware_check | GCode Viewer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/gcodeviewer | Logging (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/logging | !Octolapse (0.4.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_octolapse | Pi Support Plugin (2021.10.28) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/pluginmanager | PrintTimeGenius Plugin (2.2.8) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_PrintTimeGenius | Software Update (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/softwareupdate | Virtual Printer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2022-01-18 13:28:59,247 - octoprint.plugins.pluginmanager - INFO - The plugin was installed successfully: Octolapse, version 0.4.1 2022-01-18 13:28:59,410 - octoprint.plugins.tracking - INFO - Sent tracking event install_plugin, payload: {'plugin': 'octolapse', 'plugin_version': '0.4.1'} 2022-01-18 13:29:38,053 - octoprint.server.api.system - INFO - Performing command for core:restart: sudo service octoprint restart 2022-01-18 13:29:39,664 - octoprint.startup - INFO - ****************************************************************************** 2022-01-18 13:29:39,666 - octoprint.startup - INFO - Starting OctoPrint 1.7.2 2022-01-18 13:29:39,667 - octoprint.startup - INFO - ****************************************************************************** 2022-01-18 13:29:39,929 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity changed from offline to online 2022-01-18 13:29:40,027 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: online 2022-01-18 13:29:40,028 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 8.8.8.8:53 is working 2022-01-18 13:29:40,028 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is working 2022-01-18 13:29:40,032 - octoprint.startup - INFO - Blacklist processing done, adding 3 blacklisted plugin versions: roomtemp (any), GcodeEditor (>=0.1.1,<=0.2.8), gcodeleveling (>=0.1.0,<=0.1.1) 2022-01-18 13:29:40,056 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2022-01-18 13:29:41,081 - octoprint.plugin.core - INFO - Found 21 plugin(s) providing 21 mixin implementations, 57 hook handlers 2022-01-18 13:29:41,123 - octoprint.server.heartbeat - INFO - Starting server heartbeat, 900.0s interval 2022-01-18 13:29:41,140 - octoprint.server - INFO - Intermediary server started 2022-01-18 13:29:41,153 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/pi/.octoprint/uploads... 2022-01-18 13:29:41,167 - octoprint.filemanager.storage - INFO - ... file metadata for /home/pi/.octoprint/uploads initialized successfully. 2022-01-18 13:29:41,170 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_SHOW (needs: "Need(method='role', value='plugin_action_command_notification_show')") 2022-01-18 13:29:41,170 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_CLEAR (needs: "Need(method='role', value='plugin_action_command_notification_clear')") 2022-01-18 13:29:41,171 - octoprint.server - INFO - Added new permission from plugin action_command_prompt: PLUGIN_ACTION_COMMAND_PROMPT_INTERACT (needs: "Need(method='role', value='plugin_action_command_prompt_interact')") 2022-01-18 13:29:41,171 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_READ (needs: "Need(method='role', value='plugin_announcements_read')") 2022-01-18 13:29:41,171 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_MANAGE (needs: "Need(method='role', value='plugin_announcements_read'), Need(method='role', value='plugin_announcements_manage')") 2022-01-18 13:29:41,172 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_ADMIN (needs: "Need(method='role', value='plugin_appkeys_admin')") 2022-01-18 13:29:41,172 - octoprint.server - INFO - Added new permission from plugin backup: PLUGIN_BACKUP_ACCESS (needs: "Need(method='role', value='plugin_backup_access')") 2022-01-18 13:29:41,172 - octoprint.server - INFO - Added new permission from plugin firmware_check: PLUGIN_FIRMWARE_CHECK_DISPLAY (needs: "Need(method='role', value='plugin_firmware_check_display')") 2022-01-18 13:29:41,172 - octoprint.server - INFO - Added new permission from plugin logging: PLUGIN_LOGGING_MANAGE (needs: "Need(method='role', value='plugin_logging_manage')") 2022-01-18 13:29:41,172 - octoprint.server - INFO - Added new permission from plugin pi_support: PLUGIN_PI_SUPPORT_STATUS (needs: "Need(method='role', value='plugin_pi_support_check')") 2022-01-18 13:29:41,173 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_MANAGE (needs: "Need(method='role', value='plugin_pluginmanager_manage')") 2022-01-18 13:29:41,173 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_INSTALL (needs: "Need(method='role', value='plugin_pluginmanager_install'), Need(method='role', value='plugin_pluginmanager_manage')") 2022-01-18 13:29:41,173 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CHECK (needs: "Need(method='role', value='plugin_softwareupdate_check')") 2022-01-18 13:29:41,173 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_UPDATE (needs: "Need(method='role', value='plugin_softwareupdate_update')") 2022-01-18 13:29:41,174 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CONFIGURE (needs: "Need(method='role', value='plugin_softwareupdate_configure')") 2022-01-18 13:29:41,184 - octoprint.printer.standard - INFO - Using print time estimator provided by PrintTimeGenius 2022-01-18 13:29:41,918 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2022-01-18 13:29:42,629 - octoprint.util.pip - INFO - Version of pip is 21.3.1 2022-01-18 13:29:42,630 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-01-18 13:29:42,631 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-01-18 13:29:42,730 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk 2022-01-18 13:29:42,785 - octoprint.plugin.core - INFO - Initialized 21 plugin implementation(s) 2022-01-18 13:29:42,832 - octoprint.plugin.core - INFO - 21 plugin(s) registered with the system: | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/appkeys | Backup & Restore (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/backup | Bed Visualizer (1.1.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_bedlevelvisualizer | Core Wizard (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/corewizard | Discovery (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/discovery | Error Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/errortracking | Event Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/eventmanager | File Check (2021.2.23) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_file_check | Firmware Check (2021.10.11) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmware_check | GCode Viewer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/gcodeviewer | Logging (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/logging | Octolapse (0.4.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_octolapse | Pi Support Plugin (2021.10.28) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/pluginmanager | PrintTimeGenius Plugin (2.2.8) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_PrintTimeGenius | Software Update (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/softwareupdate | Virtual Printer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2022-01-18 13:29:42,854 - octoprint.environment - INFO - Detected environment is Python 3.9.2 under Linux (linux). Details: | hardware: | cores: 4 | freq: 1800.0 | ram: 1909063680 | os: | bits: 32 | id: linux | platform: linux | plugins: | pi_support: | model: Raspberry Pi 4 Model B Rev 1.5 | octopi_version: 1.0.0 | throttle_state: '0x0' | python: | pip: 21.3.1 | version: 3.9.2 | virtualenv: /home/pi/oprint 2022-01-18 13:29:42,866 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/webassets... 2022-01-18 13:29:42,887 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-cache... 2022-01-18 13:29:43,428 - octoprint.server - INFO - Shutting down intermediary server... 2022-01-18 13:29:43,913 - octoprint.server - INFO - Intermediary server shut down 2022-01-18 13:29:43,915 - octoprint.events - INFO - Processing startup event, this is our first event 2022-01-18 13:29:43,915 - octoprint.events - INFO - Adding 2 events to queue that were held back before startup event 2022-01-18 13:29:43,916 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue... 2022-01-18 13:29:43,924 - octoprint.server - INFO - Autoconnect on startup is configured, trying to connect to the printer... 2022-01-18 13:29:43,939 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue 2022-01-18 13:29:43,941 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json 2022-01-18 13:29:43,971 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2022-01-18 13:29:44,253 - octoprint.plugins.tracking - INFO - Sent tracking event system_unthrottled, payload: {'throttled_now': False, 'throttled_past': False, 'throttled_mask': 0, 'throttled_voltage_now': False, 'throttled_voltage_past': False, 'throttled_overheat_now': False, 'throttled_overheat_past': False} 2022-01-18 13:29:44,423 - octoprint.server - INFO - Trying to connect to configured serial port None 2022-01-18 13:29:44,513 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2022-01-18 13:29:44,541 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder... 2022-01-18 13:29:44,565 - octoprint.server.util.watchdog - INFO - ... initial scan done. 2022-01-18 13:29:44,992 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 7 port/baudrate candidates: /dev/ttyUSB0@115200, /dev/ttyUSB0@250000, /dev/ttyUSB0@230400, /dev/ttyUSB0@57600, /dev/ttyUSB0@38400, /dev/ttyUSB0@19200, /dev/ttyUSB0@9600 2022-01-18 13:29:44,993 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200 2022-01-18 13:29:44,993 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200 2022-01-18 13:29:45,063 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-18 13:29:45,074 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 13:29:45,085 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Operational" 2022-01-18 13:29:45,094 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 13:29:45,098 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2022-01-18 13:29:45,142 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin CR-6 community firmware - release 6.1 (based on Marlin 2.0.8.1) (Jun 4 2021 16:53:51)" 2022-01-18 13:29:45,167 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting 2022-01-18 13:29:45,184 - octoprint.util.comm - INFO - Firmware states that it supports emergency GCODEs to be sent without waiting for an acknowledgement first 2022-01-18 13:29:45,315 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {'firmware_name': 'Marlin CR-6 community firmware - release 6.1 (based on Marlin 2.0.8.1) (Jun 4 2021 16:53:51)', 'printer_port': None, 'printer_baudrate': 0} 2022-01-18 13:29:45,875 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2022-01-18 13:29:45,876 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-01-18 13:29:45,877 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-01-18 13:29:45,907 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk 2022-01-18 13:29:46,354 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on raspberrypi._http._tcp.local.' for _http._tcp.local. 2022-01-18 13:29:47,168 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on raspberrypi._octoprint._tcp.local.' for _octoprint._tcp.local. 2022-01-18 13:29:47,199 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance on raspberrypi for SSDP 2022-01-18 13:29:47,238 - octoprint.server - INFO - Listening on http://127.0.0.1:5000 2022-01-18 13:29:47,331 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2022-01-18 13:29:47,355 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.71 2022-01-18 13:29:47,546 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 13:29:47,546 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 13:29:48,137 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2022-01-18 13:29:48,138 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-01-18 13:29:48,138 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-01-18 13:29:48,167 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 11.7GB. That is considered sufficient for updating. 2022-01-18 13:29:48,440 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2022-01-18 13:29:48,448 - octoprint.plugins.bedlevelvisualizer - INFO - OctoPrint-BedLevelVisualizer loaded! 2022-01-18 13:29:48,519 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'http://192.168.1.76/', 'path': '/', 'query_string': 'l10n=en'} 2022-01-18 13:29:48,633 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 7, 'printer_state': 'OPERATIONAL'} 2022-01-18 13:29:48,849 - octoprint.plugins.tracking - INFO - Sent tracking event pong, payload: {'version': '1.7.2', 'os': 'linux', 'bits': 32, 'python': '3.9.2', 'pip': '21.3.1', 'cores': 4, 'freq': 1800.0, 'ram': 1909063680, 'pi_model': 'Raspberry Pi 4 Model B Rev 1.5', 'octopi_version': '1.0.0', 'plugins': 'printtimegenius:2.2.8,octolapse:0.4.1,bedlevelvisualizer:1.1.1'} 2022-01-18 13:29:49,031 - octoprint.server.util.sockjs - INFO - User pi logged in on the socket from client ::ffff:192.168.1.71 2022-01-18 13:29:49,045 - octoprint.plugins.tracking - INFO - Sent tracking event startup, payload: {'version': '1.7.2', 'os': 'linux', 'bits': 32, 'python': '3.9.2', 'pip': '21.3.1', 'cores': 4, 'freq': 1800.0, 'ram': 1909063680, 'pi_model': 'Raspberry Pi 4 Model B Rev 1.5', 'octopi_version': '1.0.0'} 2022-01-18 13:29:55,848 - octoprint.server.preemptive_cache - INFO - ... done in 7.33s 2022-01-18 13:30:46,423 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 13:30:46,424 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 13:30:46,533 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.71 2022-01-18 13:30:47,255 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.71 2022-01-18 13:30:47,295 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 13:30:47,295 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 13:30:48,674 - octoprint.server.util.sockjs - INFO - User pi logged in on the socket from client ::ffff:192.168.1.71 2022-01-18 13:30:49,311 - octoprint.plugins.tracking - INFO - Sent tracking event webui_load, payload: {'browser_name': 'Chrome', 'browser_version': '97.0.4692.71', 'os_name': 'Windows', 'os_version': '10'} 2022-01-18 13:31:08,120 - octoprint.plugins.pluginmanager - INFO - Installing plugin from https://github.com/vitormhenrique/OctoPrint-Enclosure/archive/master.zip 2022-01-18 13:31:23,569 - octoprint.plugins.pluginmanager - ERROR - Could not install plugin from https://github.com/vitormhenrique/OctoPrint-Enclosure/archive/master.zip Traceback (most recent call last): File "/home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/pluginmanager/__init__.py", line 900, in _command_install_archive returncode, stdout, stderr = self._call_pip(pip_args) File "/home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/pluginmanager/__init__.py", line 1631, in _call_pip return self._pip_caller.execute(*args, **kwargs) File "/home/pi/oprint/lib/python3.9/site-packages/octoprint/util/pip.py", line 208, in execute return self.call(command, **kwargs) File "/home/pi/oprint/lib/python3.9/site-packages/octoprint/util/commandline.py", line 243, in call all_stderr += process_stderr(p.stderr.readlines(timeout=0.5)) File "/home/pi/oprint/lib/python3.9/site-packages/octoprint/util/commandline.py", line 239, in process_stderr return process_lines(lines, self._log_stderr) File "/home/pi/oprint/lib/python3.9/site-packages/octoprint/util/commandline.py", line 229, in process_lines processed = self._preprocess_lines( File "/home/pi/oprint/lib/python3.9/site-packages/octoprint/util/pip.py", line 498, in _preprocess_lines return list(map(self._preprocess, lines)) File "/home/pi/oprint/lib/python3.9/site-packages/octoprint/util/pip.py", line 517, in _preprocess return to_unicode(clean_ansi(text)) File "/home/pi/oprint/lib/python3.9/site-packages/octoprint/util/commandline.py", line 57, in clean_ansi return _ANSI_REGEX.sub(b"", line.encode("latin1")).decode("latin1") UnicodeEncodeError: 'latin-1' codec can't encode character '\u2018' in position 32: ordinal not in range(256) 2022-01-18 13:31:23,569 - octoprint.plugins.pluginmanager - ERROR - Reason: UnicodeEncodeError('latin-1', ' source/py_gpio.c: In function ‘PyInit__GPIO’:\n', 32, 33, 'ordinal not in range(256)') Traceback (most recent call last): File "/home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/pluginmanager/__init__.py", line 900, in _command_install_archive returncode, stdout, stderr = self._call_pip(pip_args) File "/home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/pluginmanager/__init__.py", line 1631, in _call_pip return self._pip_caller.execute(*args, **kwargs) File "/home/pi/oprint/lib/python3.9/site-packages/octoprint/util/pip.py", line 208, in execute return self.call(command, **kwargs) File "/home/pi/oprint/lib/python3.9/site-packages/octoprint/util/commandline.py", line 243, in call all_stderr += process_stderr(p.stderr.readlines(timeout=0.5)) File "/home/pi/oprint/lib/python3.9/site-packages/octoprint/util/commandline.py", line 239, in process_stderr return process_lines(lines, self._log_stderr) File "/home/pi/oprint/lib/python3.9/site-packages/octoprint/util/commandline.py", line 229, in process_lines processed = self._preprocess_lines( File "/home/pi/oprint/lib/python3.9/site-packages/octoprint/util/pip.py", line 498, in _preprocess_lines return list(map(self._preprocess, lines)) File "/home/pi/oprint/lib/python3.9/site-packages/octoprint/util/pip.py", line 517, in _preprocess return to_unicode(clean_ansi(text)) File "/home/pi/oprint/lib/python3.9/site-packages/octoprint/util/commandline.py", line 57, in clean_ansi return _ANSI_REGEX.sub(b"", line.encode("latin1")).decode("latin1") UnicodeEncodeError: 'latin-1' codec can't encode character '\u2018' in position 32: ordinal not in range(256) 2022-01-18 13:31:43,657 - octoprint.plugins.pluginmanager - INFO - Installing plugin from https://github.com/vitormhenrique/OctoPrint-Enclosure/archive/master.zip 2022-01-18 13:31:57,896 - octoprint.plugins.pluginmanager - ERROR - Could not install plugin from https://github.com/vitormhenrique/OctoPrint-Enclosure/archive/master.zip Traceback (most recent call last): File "/home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/pluginmanager/__init__.py", line 900, in _command_install_archive returncode, stdout, stderr = self._call_pip(pip_args) File "/home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/pluginmanager/__init__.py", line 1631, in _call_pip return self._pip_caller.execute(*args, **kwargs) File "/home/pi/oprint/lib/python3.9/site-packages/octoprint/util/pip.py", line 208, in execute return self.call(command, **kwargs) File "/home/pi/oprint/lib/python3.9/site-packages/octoprint/util/commandline.py", line 243, in call all_stderr += process_stderr(p.stderr.readlines(timeout=0.5)) File "/home/pi/oprint/lib/python3.9/site-packages/octoprint/util/commandline.py", line 239, in process_stderr return process_lines(lines, self._log_stderr) File "/home/pi/oprint/lib/python3.9/site-packages/octoprint/util/commandline.py", line 229, in process_lines processed = self._preprocess_lines( File "/home/pi/oprint/lib/python3.9/site-packages/octoprint/util/pip.py", line 498, in _preprocess_lines return list(map(self._preprocess, lines)) File "/home/pi/oprint/lib/python3.9/site-packages/octoprint/util/pip.py", line 517, in _preprocess return to_unicode(clean_ansi(text)) File "/home/pi/oprint/lib/python3.9/site-packages/octoprint/util/commandline.py", line 57, in clean_ansi return _ANSI_REGEX.sub(b"", line.encode("latin1")).decode("latin1") UnicodeEncodeError: 'latin-1' codec can't encode character '\u2018' in position 32: ordinal not in range(256) 2022-01-18 13:31:57,896 - octoprint.plugins.pluginmanager - ERROR - Reason: UnicodeEncodeError('latin-1', ' source/py_gpio.c: In function ‘PyInit__GPIO’:\n', 32, 33, 'ordinal not in range(256)') Traceback (most recent call last): File "/home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/pluginmanager/__init__.py", line 900, in _command_install_archive returncode, stdout, stderr = self._call_pip(pip_args) File "/home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/pluginmanager/__init__.py", line 1631, in _call_pip return self._pip_caller.execute(*args, **kwargs) File "/home/pi/oprint/lib/python3.9/site-packages/octoprint/util/pip.py", line 208, in execute return self.call(command, **kwargs) File "/home/pi/oprint/lib/python3.9/site-packages/octoprint/util/commandline.py", line 243, in call all_stderr += process_stderr(p.stderr.readlines(timeout=0.5)) File "/home/pi/oprint/lib/python3.9/site-packages/octoprint/util/commandline.py", line 239, in process_stderr return process_lines(lines, self._log_stderr) File "/home/pi/oprint/lib/python3.9/site-packages/octoprint/util/commandline.py", line 229, in process_lines processed = self._preprocess_lines( File "/home/pi/oprint/lib/python3.9/site-packages/octoprint/util/pip.py", line 498, in _preprocess_lines return list(map(self._preprocess, lines)) File "/home/pi/oprint/lib/python3.9/site-packages/octoprint/util/pip.py", line 517, in _preprocess return to_unicode(clean_ansi(text)) File "/home/pi/oprint/lib/python3.9/site-packages/octoprint/util/commandline.py", line 57, in clean_ansi return _ANSI_REGEX.sub(b"", line.encode("latin1")).decode("latin1") UnicodeEncodeError: 'latin-1' codec can't encode character '\u2018' in position 32: ordinal not in range(256) 2022-01-18 13:32:15,999 - octoprint.plugins.pluginmanager - INFO - Installing plugin from https://github.com/OctoPrint/OctoPrint-FirmwareUpdater/archive/master.zip 2022-01-18 13:32:21,232 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2022-01-18 13:32:21,284 - octoprint.plugin.core - INFO - Found 22 plugin(s) providing 21 mixin implementations, 57 hook handlers 2022-01-18 13:32:21,285 - octoprint.plugin.core - INFO - 22 plugin(s) registered with the system: | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/appkeys | Backup & Restore (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/backup | Bed Visualizer (1.1.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_bedlevelvisualizer | Core Wizard (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/corewizard | Discovery (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/discovery | Error Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/errortracking | Event Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/eventmanager | File Check (2021.2.23) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_file_check | Firmware Check (2021.10.11) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmware_check | !Firmware Updater (1.13.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmwareupdater | GCode Viewer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/gcodeviewer | Logging (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/logging | Octolapse (0.4.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_octolapse | Pi Support Plugin (2021.10.28) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/pluginmanager | PrintTimeGenius Plugin (2.2.8) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_PrintTimeGenius | Software Update (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/softwareupdate | Virtual Printer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2022-01-18 13:32:21,286 - octoprint.plugins.pluginmanager - INFO - The plugin was installed successfully: Firmware Updater, version 1.13.0 2022-01-18 13:32:21,450 - octoprint.plugins.tracking - INFO - Sent tracking event install_plugin, payload: {'plugin': 'firmwareupdater', 'plugin_version': '1.13.0'} 2022-01-18 13:33:48,459 - octoprint.server.api.system - INFO - Performing command for core:restart: sudo service octoprint restart 2022-01-18 13:33:50,025 - octoprint.startup - INFO - ****************************************************************************** 2022-01-18 13:33:50,027 - octoprint.startup - INFO - Starting OctoPrint 1.7.2 2022-01-18 13:33:50,027 - octoprint.startup - INFO - ****************************************************************************** 2022-01-18 13:33:50,291 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity changed from offline to online 2022-01-18 13:33:50,390 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: online 2022-01-18 13:33:50,391 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 8.8.8.8:53 is working 2022-01-18 13:33:50,391 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is working 2022-01-18 13:33:50,569 - octoprint.startup - INFO - Blacklist processing done, adding 3 blacklisted plugin versions: roomtemp (any), GcodeEditor (>=0.1.1,<=0.2.8), gcodeleveling (>=0.1.0,<=0.1.1) 2022-01-18 13:33:50,569 - octoprint.plugin.core - WARNING - Invalid version requirement >=0.1.1,<=0.2.8 for blacklist entry GcodeEditor, ignoring 2022-01-18 13:33:50,569 - octoprint.plugin.core - WARNING - Invalid version requirement >=0.1.0,<=0.1.1 for blacklist entry gcodeleveling, ignoring 2022-01-18 13:33:50,596 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2022-01-18 13:33:51,705 - octoprint.plugin.core - INFO - Found 22 plugin(s) providing 22 mixin implementations, 62 hook handlers 2022-01-18 13:33:51,749 - octoprint.server.heartbeat - INFO - Starting server heartbeat, 900.0s interval 2022-01-18 13:33:51,765 - octoprint.server - INFO - Intermediary server started 2022-01-18 13:33:51,777 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/pi/.octoprint/uploads... 2022-01-18 13:33:51,792 - octoprint.filemanager.storage - INFO - ... file metadata for /home/pi/.octoprint/uploads initialized successfully. 2022-01-18 13:33:51,795 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_SHOW (needs: "Need(method='role', value='plugin_action_command_notification_show')") 2022-01-18 13:33:51,795 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_CLEAR (needs: "Need(method='role', value='plugin_action_command_notification_clear')") 2022-01-18 13:33:51,795 - octoprint.server - INFO - Added new permission from plugin action_command_prompt: PLUGIN_ACTION_COMMAND_PROMPT_INTERACT (needs: "Need(method='role', value='plugin_action_command_prompt_interact')") 2022-01-18 13:33:51,796 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_READ (needs: "Need(method='role', value='plugin_announcements_read')") 2022-01-18 13:33:51,796 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_MANAGE (needs: "Need(method='role', value='plugin_announcements_manage'), Need(method='role', value='plugin_announcements_read')") 2022-01-18 13:33:51,796 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_ADMIN (needs: "Need(method='role', value='plugin_appkeys_admin')") 2022-01-18 13:33:51,797 - octoprint.server - INFO - Added new permission from plugin backup: PLUGIN_BACKUP_ACCESS (needs: "Need(method='role', value='plugin_backup_access')") 2022-01-18 13:33:51,797 - octoprint.server - INFO - Added new permission from plugin firmware_check: PLUGIN_FIRMWARE_CHECK_DISPLAY (needs: "Need(method='role', value='plugin_firmware_check_display')") 2022-01-18 13:33:51,797 - octoprint.server - INFO - Added new permission from plugin logging: PLUGIN_LOGGING_MANAGE (needs: "Need(method='role', value='plugin_logging_manage')") 2022-01-18 13:33:51,797 - octoprint.server - INFO - Added new permission from plugin pi_support: PLUGIN_PI_SUPPORT_STATUS (needs: "Need(method='role', value='plugin_pi_support_check')") 2022-01-18 13:33:51,797 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_MANAGE (needs: "Need(method='role', value='plugin_pluginmanager_manage')") 2022-01-18 13:33:51,798 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_INSTALL (needs: "Need(method='role', value='plugin_pluginmanager_manage'), Need(method='role', value='plugin_pluginmanager_install')") 2022-01-18 13:33:51,798 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CHECK (needs: "Need(method='role', value='plugin_softwareupdate_check')") 2022-01-18 13:33:51,798 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_UPDATE (needs: "Need(method='role', value='plugin_softwareupdate_update')") 2022-01-18 13:33:51,798 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CONFIGURE (needs: "Need(method='role', value='plugin_softwareupdate_configure')") 2022-01-18 13:33:51,806 - octoprint.printer.standard - INFO - Using print time estimator provided by PrintTimeGenius 2022-01-18 13:33:52,547 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2022-01-18 13:33:53,264 - octoprint.util.pip - INFO - Version of pip is 21.3.1 2022-01-18 13:33:53,266 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-01-18 13:33:53,267 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-01-18 13:33:53,323 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk 2022-01-18 13:33:53,387 - octoprint.plugins.firmwareupdater - INFO - Python binproto2 package installed: False 2022-01-18 13:33:53,400 - octoprint.plugin.core - INFO - Initialized 22 plugin implementation(s) 2022-01-18 13:33:53,406 - octoprint.plugins.firmwareupdater - INFO - Migrating plugin settings to a profile 2022-01-18 13:33:53,476 - octoprint.plugin.core - INFO - 22 plugin(s) registered with the system: | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/appkeys | Backup & Restore (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/backup | Bed Visualizer (1.1.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_bedlevelvisualizer | Core Wizard (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/corewizard | Discovery (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/discovery | Error Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/errortracking | Event Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/eventmanager | File Check (2021.2.23) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_file_check | Firmware Check (2021.10.11) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmware_check | Firmware Updater (1.13.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmwareupdater | GCode Viewer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/gcodeviewer | Logging (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/logging | Octolapse (0.4.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_octolapse | Pi Support Plugin (2021.10.28) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/pluginmanager | PrintTimeGenius Plugin (2.2.8) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_PrintTimeGenius | Software Update (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/softwareupdate | Virtual Printer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2022-01-18 13:33:53,499 - octoprint.environment - INFO - Detected environment is Python 3.9.2 under Linux (linux). Details: | hardware: | cores: 4 | freq: 1800.0 | ram: 1909063680 | os: | bits: 32 | id: linux | platform: linux | plugins: | pi_support: | model: Raspberry Pi 4 Model B Rev 1.5 | octopi_version: 1.0.0 | throttle_state: '0x0' | python: | pip: 21.3.1 | version: 3.9.2 | virtualenv: /home/pi/oprint 2022-01-18 13:33:53,511 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/webassets... 2022-01-18 13:33:53,547 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-cache... 2022-01-18 13:33:54,097 - octoprint.plugins.firmwareupdater - INFO - Setting maximum upload size for /flash to 5243904 2022-01-18 13:33:54,098 - octoprint.server - INFO - Shutting down intermediary server... 2022-01-18 13:33:54,298 - octoprint.server - INFO - Intermediary server shut down 2022-01-18 13:33:54,299 - octoprint.events - INFO - Processing startup event, this is our first event 2022-01-18 13:33:54,299 - octoprint.events - INFO - Adding 2 events to queue that were held back before startup event 2022-01-18 13:33:54,300 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue... 2022-01-18 13:33:54,308 - octoprint.server - INFO - Autoconnect on startup is configured, trying to connect to the printer... 2022-01-18 13:33:54,310 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue 2022-01-18 13:33:54,311 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json 2022-01-18 13:33:54,345 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2022-01-18 13:33:54,573 - octoprint.server - INFO - Trying to connect to configured serial port None 2022-01-18 13:33:54,584 - octoprint.plugins.tracking - INFO - Sent tracking event system_unthrottled, payload: {'throttled_now': False, 'throttled_past': False, 'throttled_mask': 0, 'throttled_voltage_now': False, 'throttled_voltage_past': False, 'throttled_overheat_now': False, 'throttled_overheat_past': False} 2022-01-18 13:33:54,699 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2022-01-18 13:33:54,734 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder... 2022-01-18 13:33:54,788 - octoprint.server.util.watchdog - INFO - ... initial scan done. 2022-01-18 13:33:54,896 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 7 port/baudrate candidates: /dev/ttyUSB0@115200, /dev/ttyUSB0@250000, /dev/ttyUSB0@230400, /dev/ttyUSB0@57600, /dev/ttyUSB0@38400, /dev/ttyUSB0@19200, /dev/ttyUSB0@9600 2022-01-18 13:33:54,896 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200 2022-01-18 13:33:54,905 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200 2022-01-18 13:33:55,056 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-18 13:33:55,075 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 13:33:55,203 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Operational" 2022-01-18 13:33:55,211 - octoprint.plugins.firmwareupdater - INFO - Got CONNECTED event 2022-01-18 13:33:55,212 - octoprint.plugins.firmwareupdater - INFO - Run postflash flag is not set 2022-01-18 13:33:55,212 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 13:33:55,324 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin CR-6 community firmware - release 6.1 (based on Marlin 2.0.8.1) (Jun 4 2021 16:53:51)" 2022-01-18 13:33:55,349 - octoprint.plugins.firmwareupdater - INFO - Setting BINARY_FILE_TRANSFER capability to False 2022-01-18 13:33:55,387 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting 2022-01-18 13:33:55,428 - octoprint.util.comm - INFO - Firmware states that it supports emergency GCODEs to be sent without waiting for an acknowledgement first 2022-01-18 13:33:55,481 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2022-01-18 13:33:55,719 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {'firmware_name': 'Marlin CR-6 community firmware - release 6.1 (based on Marlin 2.0.8.1) (Jun 4 2021 16:53:51)', 'printer_port': None, 'printer_baudrate': 0} 2022-01-18 13:33:56,281 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2022-01-18 13:33:56,282 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-01-18 13:33:56,283 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-01-18 13:33:56,316 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk 2022-01-18 13:33:56,768 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on raspberrypi._http._tcp.local.' for _http._tcp.local. 2022-01-18 13:33:57,584 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on raspberrypi._octoprint._tcp.local.' for _octoprint._tcp.local. 2022-01-18 13:33:57,591 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance on raspberrypi for SSDP 2022-01-18 13:33:57,650 - octoprint.server - INFO - Listening on http://127.0.0.1:5000 2022-01-18 13:33:57,759 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2022-01-18 13:33:57,832 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.71 2022-01-18 13:33:58,020 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 13:33:58,020 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 13:33:58,183 - octoprint.server.util.sockjs - INFO - User pi logged in on the socket from client ::ffff:192.168.1.71 2022-01-18 13:33:58,571 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2022-01-18 13:33:58,577 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-01-18 13:33:58,577 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-01-18 13:33:58,601 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 11.7GB. That is considered sufficient for updating. 2022-01-18 13:33:58,902 - octoprint.plugins.bedlevelvisualizer - INFO - OctoPrint-BedLevelVisualizer loaded! 2022-01-18 13:33:58,915 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2022-01-18 13:33:59,059 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'http://192.168.1.76/', 'path': '/', 'query_string': 'l10n=en'} 2022-01-18 13:33:59,070 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 7, 'printer_state': 'OPERATIONAL'} 2022-01-18 13:33:59,341 - octoprint.plugins.tracking - INFO - Sent tracking event pong, payload: {'version': '1.7.2', 'os': 'linux', 'bits': 32, 'python': '3.9.2', 'pip': '21.3.1', 'cores': 4, 'freq': 1800.0, 'ram': 1909063680, 'pi_model': 'Raspberry Pi 4 Model B Rev 1.5', 'octopi_version': '1.0.0', 'plugins': 'printtimegenius:2.2.8,firmwareupdater:1.13.0,octolapse:0.4.1,bedlevelvisualizer:1.1.1'} 2022-01-18 13:33:59,722 - octoprint.plugins.tracking - INFO - Sent tracking event startup, payload: {'version': '1.7.2', 'os': 'linux', 'bits': 32, 'python': '3.9.2', 'pip': '21.3.1', 'cores': 4, 'freq': 1800.0, 'ram': 1909063680, 'pi_model': 'Raspberry Pi 4 Model B Rev 1.5', 'octopi_version': '1.0.0'} 2022-01-18 13:34:06,754 - octoprint.server.preemptive_cache - INFO - ... done in 7.69s 2022-01-18 13:35:01,120 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 13:35:01,121 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 13:35:01,232 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.71 2022-01-18 13:35:01,843 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.71 2022-01-18 13:35:01,887 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 13:35:01,888 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 13:35:02,842 - octoprint.server.util.sockjs - INFO - User pi logged in on the socket from client ::ffff:192.168.1.71 2022-01-18 13:35:03,503 - octoprint.plugins.tracking - INFO - Sent tracking event webui_load, payload: {'browser_name': 'Chrome', 'browser_version': '97.0.4692.71', 'os_name': 'Windows', 'os_version': '10'} 2022-01-18 13:35:39,687 - octoprint.plugins.pluginmanager - INFO - Installing plugin from https://github.com/BillyBlaze/OctoPrint-TouchUI/archive/master.zip 2022-01-18 13:35:45,200 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2022-01-18 13:35:45,241 - octoprint.plugin.core - INFO - Found 23 plugin(s) providing 22 mixin implementations, 62 hook handlers 2022-01-18 13:35:45,243 - octoprint.plugin.core - INFO - 23 plugin(s) registered with the system: | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/appkeys | Backup & Restore (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/backup | Bed Visualizer (1.1.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_bedlevelvisualizer | Core Wizard (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/corewizard | Discovery (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/discovery | Error Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/errortracking | Event Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/eventmanager | File Check (2021.2.23) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_file_check | Firmware Check (2021.10.11) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmware_check | Firmware Updater (1.13.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmwareupdater | GCode Viewer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/gcodeviewer | Logging (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/logging | Octolapse (0.4.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_octolapse | Pi Support Plugin (2021.10.28) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/pluginmanager | PrintTimeGenius Plugin (2.2.8) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_PrintTimeGenius | Software Update (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/softwareupdate | !TouchUI (0.3.18) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_touchui | Virtual Printer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2022-01-18 13:35:45,243 - octoprint.plugins.pluginmanager - INFO - The plugin was installed successfully: TouchUI, version 0.3.18 2022-01-18 13:35:45,400 - octoprint.plugins.tracking - INFO - Sent tracking event install_plugin, payload: {'plugin': 'touchui', 'plugin_version': '0.3.18'} 2022-01-18 13:35:58,107 - octoprint.plugins.pluginmanager - INFO - Installing plugin from https://github.com/j7126/OctoPrint-Dashboard/archive/master.zip 2022-01-18 13:36:03,548 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2022-01-18 13:36:03,606 - octoprint.plugin.core - INFO - Found 24 plugin(s) providing 22 mixin implementations, 62 hook handlers 2022-01-18 13:36:03,607 - octoprint.plugin.core - INFO - 24 plugin(s) registered with the system: | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/appkeys | Backup & Restore (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/backup | Bed Visualizer (1.1.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_bedlevelvisualizer | Core Wizard (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/corewizard | !Dashboard (1.19.6) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_dashboard | Discovery (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/discovery | Error Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/errortracking | Event Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/eventmanager | File Check (2021.2.23) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_file_check | Firmware Check (2021.10.11) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmware_check | Firmware Updater (1.13.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmwareupdater | GCode Viewer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/gcodeviewer | Logging (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/logging | Octolapse (0.4.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_octolapse | Pi Support Plugin (2021.10.28) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/pluginmanager | PrintTimeGenius Plugin (2.2.8) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_PrintTimeGenius | Software Update (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/softwareupdate | !TouchUI (0.3.18) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_touchui | Virtual Printer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2022-01-18 13:36:03,608 - octoprint.plugins.pluginmanager - INFO - The plugin was installed successfully: Dashboard, version 1.19.6 2022-01-18 13:36:03,755 - octoprint.plugins.tracking - INFO - Sent tracking event install_plugin, payload: {'plugin': 'dashboard', 'plugin_version': '1.19.6'} 2022-01-18 13:36:37,707 - octoprint.plugins.pluginmanager - INFO - Installing plugin from https://github.com/TheSpaghettiDetective/OctoPrint-TheSpaghettiDetective/archive/master.zip 2022-01-18 13:37:00,095 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2022-01-18 13:37:00,146 - octoprint.plugin.core - INFO - Found 25 plugin(s) providing 22 mixin implementations, 62 hook handlers 2022-01-18 13:37:00,147 - octoprint.plugin.core - INFO - 25 plugin(s) registered with the system: | !Access Anywhere - The Spaghetti Detective (1.8.9) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_thespaghettidetective | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/appkeys | Backup & Restore (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/backup | Bed Visualizer (1.1.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_bedlevelvisualizer | Core Wizard (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/corewizard | !Dashboard (1.19.6) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_dashboard | Discovery (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/discovery | Error Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/errortracking | Event Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/eventmanager | File Check (2021.2.23) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_file_check | Firmware Check (2021.10.11) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmware_check | Firmware Updater (1.13.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmwareupdater | GCode Viewer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/gcodeviewer | Logging (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/logging | Octolapse (0.4.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_octolapse | Pi Support Plugin (2021.10.28) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/pluginmanager | PrintTimeGenius Plugin (2.2.8) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_PrintTimeGenius | Software Update (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/softwareupdate | !TouchUI (0.3.18) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_touchui | Virtual Printer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2022-01-18 13:37:00,147 - octoprint.plugins.pluginmanager - INFO - The plugin was installed successfully: Access Anywhere - The Spaghetti Detective, version 1.8.9 2022-01-18 13:37:00,307 - octoprint.plugins.tracking - INFO - Sent tracking event install_plugin, payload: {'plugin': 'thespaghettidetective', 'plugin_version': '1.8.9'} 2022-01-18 13:37:26,045 - octoprint.plugins.pluginmanager - INFO - Installing plugin from https://github.com/OllisGit/OctoPrint-DisplayLayerProgress/releases/latest/download/master.zip 2022-01-18 13:37:31,547 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2022-01-18 13:37:31,617 - octoprint.plugin.core - INFO - Found 26 plugin(s) providing 22 mixin implementations, 62 hook handlers 2022-01-18 13:37:31,618 - octoprint.plugin.core - INFO - 26 plugin(s) registered with the system: | !Access Anywhere - The Spaghetti Detective (1.8.9) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_thespaghettidetective | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/appkeys | Backup & Restore (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/backup | Bed Visualizer (1.1.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_bedlevelvisualizer | Core Wizard (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/corewizard | !Dashboard (1.19.6) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_dashboard | Discovery (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/discovery | !DisplayLayerProgress Plugin (1.27.2) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_DisplayLayerProgress | Error Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/errortracking | Event Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/eventmanager | File Check (2021.2.23) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_file_check | Firmware Check (2021.10.11) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmware_check | Firmware Updater (1.13.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmwareupdater | GCode Viewer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/gcodeviewer | Logging (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/logging | Octolapse (0.4.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_octolapse | Pi Support Plugin (2021.10.28) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/pluginmanager | PrintTimeGenius Plugin (2.2.8) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_PrintTimeGenius | Software Update (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/softwareupdate | !TouchUI (0.3.18) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_touchui | Virtual Printer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2022-01-18 13:37:31,618 - octoprint.plugins.pluginmanager - INFO - The plugin was installed successfully: DisplayLayerProgress Plugin, version 1.27.2 2022-01-18 13:37:31,770 - octoprint.plugins.tracking - INFO - Sent tracking event install_plugin, payload: {'plugin': 'DisplayLayerProgress', 'plugin_version': '1.27.2'} 2022-01-18 13:39:58,042 - octoprint.plugins.pluginmanager - INFO - Installing plugin from https://github.com/SimplyPrint/OctoPrint-Creality2xTemperatureReportingFix/archive/master.zip 2022-01-18 13:40:03,591 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2022-01-18 13:40:03,633 - octoprint.plugin.core - INFO - Found 27 plugin(s) providing 23 mixin implementations, 64 hook handlers 2022-01-18 13:40:03,635 - octoprint.plugin.core - INFO - 27 plugin(s) registered with the system: | !Access Anywhere - The Spaghetti Detective (1.8.9) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_thespaghettidetective | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/appkeys | Backup & Restore (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/backup | Bed Visualizer (1.1.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_bedlevelvisualizer | Core Wizard (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/corewizard | Creality-2x-temperature-reporting-fix (0.0.4) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_ender3v2tempfix | !Dashboard (1.19.6) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_dashboard | Discovery (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/discovery | !DisplayLayerProgress Plugin (1.27.2) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_DisplayLayerProgress | Error Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/errortracking | Event Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/eventmanager | File Check (2021.2.23) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_file_check | Firmware Check (2021.10.11) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmware_check | Firmware Updater (1.13.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmwareupdater | GCode Viewer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/gcodeviewer | Logging (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/logging | Octolapse (0.4.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_octolapse | Pi Support Plugin (2021.10.28) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/pluginmanager | PrintTimeGenius Plugin (2.2.8) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_PrintTimeGenius | Software Update (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/softwareupdate | !TouchUI (0.3.18) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_touchui | Virtual Printer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2022-01-18 13:40:03,635 - octoprint.plugins.pluginmanager - INFO - The plugin was installed successfully: Creality-2x-temperature-reporting-fix, version 0.0.4 2022-01-18 13:40:03,787 - octoprint.plugins.tracking - INFO - Sent tracking event install_plugin, payload: {'plugin': 'ender3v2tempfix', 'plugin_version': '0.0.4'} 2022-01-18 13:40:32,527 - octoprint.plugins.pluginmanager - INFO - Installing plugin from https://github.com/RomainOdeval/OctoPrint-CrealityTemperature/releases/latest/download/master.zip 2022-01-18 13:40:37,980 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2022-01-18 13:40:38,023 - octoprint.plugin.core - INFO - Found 28 plugin(s) providing 24 mixin implementations, 66 hook handlers 2022-01-18 13:40:38,025 - octoprint.plugin.core - INFO - 28 plugin(s) registered with the system: | !Access Anywhere - The Spaghetti Detective (1.8.9) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_thespaghettidetective | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/appkeys | Backup & Restore (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/backup | Bed Visualizer (1.1.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_bedlevelvisualizer | Core Wizard (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/corewizard | Creality Temperature (1.2.4) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_CrealityTemperature | Creality-2x-temperature-reporting-fix (0.0.4) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_ender3v2tempfix | !Dashboard (1.19.6) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_dashboard | Discovery (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/discovery | !DisplayLayerProgress Plugin (1.27.2) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_DisplayLayerProgress | Error Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/errortracking | Event Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/eventmanager | File Check (2021.2.23) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_file_check | Firmware Check (2021.10.11) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmware_check | Firmware Updater (1.13.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmwareupdater | GCode Viewer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/gcodeviewer | Logging (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/logging | Octolapse (0.4.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_octolapse | Pi Support Plugin (2021.10.28) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/pluginmanager | PrintTimeGenius Plugin (2.2.8) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_PrintTimeGenius | Software Update (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/softwareupdate | !TouchUI (0.3.18) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_touchui | Virtual Printer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2022-01-18 13:40:38,025 - octoprint.plugins.pluginmanager - INFO - The plugin was installed successfully: Creality Temperature, version 1.2.4 2022-01-18 13:40:38,179 - octoprint.plugins.tracking - INFO - Sent tracking event install_plugin, payload: {'plugin': 'CrealityTemperature', 'plugin_version': '1.2.4'} 2022-01-18 13:41:14,055 - octoprint.plugins.pluginmanager - INFO - Installing plugin from https://github.com/NilsRo/OctoPrint-SlicerEstimator/archive/master.zip 2022-01-18 13:41:19,557 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2022-01-18 13:41:19,610 - octoprint.plugin.core - INFO - Found 29 plugin(s) providing 24 mixin implementations, 66 hook handlers 2022-01-18 13:41:19,611 - octoprint.plugin.core - INFO - 29 plugin(s) registered with the system: | !Access Anywhere - The Spaghetti Detective (1.8.9) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_thespaghettidetective | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/appkeys | Backup & Restore (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/backup | Bed Visualizer (1.1.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_bedlevelvisualizer | Core Wizard (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/corewizard | Creality Temperature (1.2.4) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_CrealityTemperature | Creality-2x-temperature-reporting-fix (0.0.4) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_ender3v2tempfix | !Dashboard (1.19.6) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_dashboard | Discovery (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/discovery | !DisplayLayerProgress Plugin (1.27.2) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_DisplayLayerProgress | Error Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/errortracking | Event Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/eventmanager | File Check (2021.2.23) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_file_check | Firmware Check (2021.10.11) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmware_check | Firmware Updater (1.13.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmwareupdater | GCode Viewer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/gcodeviewer | Logging (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/logging | Octolapse (0.4.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_octolapse | Pi Support Plugin (2021.10.28) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/pluginmanager | PrintTimeGenius Plugin (2.2.8) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_PrintTimeGenius | !Slicer Estimator (1.2.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_SlicerEstimator | Software Update (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/softwareupdate | !TouchUI (0.3.18) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_touchui | Virtual Printer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2022-01-18 13:41:19,611 - octoprint.plugins.pluginmanager - INFO - The plugin was installed successfully: Slicer Estimator, version 1.2.0 2022-01-18 13:41:19,763 - octoprint.plugins.tracking - INFO - Sent tracking event install_plugin, payload: {'plugin': 'SlicerEstimator', 'plugin_version': '1.2.0'} 2022-01-18 13:41:25,548 - octoprint.plugins.pluginmanager - INFO - Installing plugin from https://github.com/OctoPrint/OctoPrint-CuraLegacy/archive/master.zip 2022-01-18 13:41:31,118 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2022-01-18 13:41:31,174 - octoprint.plugin.core - INFO - Found 30 plugin(s) providing 24 mixin implementations, 66 hook handlers 2022-01-18 13:41:31,175 - octoprint.plugin.core - INFO - 30 plugin(s) registered with the system: | !Access Anywhere - The Spaghetti Detective (1.8.9) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_thespaghettidetective | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/appkeys | Backup & Restore (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/backup | Bed Visualizer (1.1.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_bedlevelvisualizer | Core Wizard (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/corewizard | Creality Temperature (1.2.4) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_CrealityTemperature | Creality-2x-temperature-reporting-fix (0.0.4) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_ender3v2tempfix | !CuraEngine Legacy (1.1.2) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_curalegacy | !Dashboard (1.19.6) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_dashboard | Discovery (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/discovery | !DisplayLayerProgress Plugin (1.27.2) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_DisplayLayerProgress | Error Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/errortracking | Event Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/eventmanager | File Check (2021.2.23) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_file_check | Firmware Check (2021.10.11) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmware_check | Firmware Updater (1.13.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmwareupdater | GCode Viewer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/gcodeviewer | Logging (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/logging | Octolapse (0.4.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_octolapse | Pi Support Plugin (2021.10.28) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/pluginmanager | PrintTimeGenius Plugin (2.2.8) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_PrintTimeGenius | !Slicer Estimator (1.2.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_SlicerEstimator | Software Update (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/softwareupdate | !TouchUI (0.3.18) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_touchui | Virtual Printer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2022-01-18 13:41:31,175 - octoprint.plugins.pluginmanager - INFO - The plugin was installed successfully: CuraEngine Legacy, version 1.1.2 2022-01-18 13:41:31,438 - octoprint.plugins.tracking - INFO - Sent tracking event install_plugin, payload: {'plugin': 'curalegacy', 'plugin_version': '1.1.2'} 2022-01-18 13:41:47,397 - octoprint.server.api.system - INFO - Performing command for core:restart: sudo service octoprint restart 2022-01-18 13:41:49,481 - octoprint.startup - INFO - ****************************************************************************** 2022-01-18 13:41:49,482 - octoprint.startup - INFO - Starting OctoPrint 1.7.2 2022-01-18 13:41:49,483 - octoprint.startup - INFO - ****************************************************************************** 2022-01-18 13:41:49,752 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity changed from offline to online 2022-01-18 13:41:49,844 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: online 2022-01-18 13:41:49,844 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 8.8.8.8:53 is working 2022-01-18 13:41:49,844 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is working 2022-01-18 13:41:49,848 - octoprint.startup - INFO - Blacklist processing done, adding 3 blacklisted plugin versions: roomtemp (any), GcodeEditor (>=0.1.1,<=0.2.8), gcodeleveling (>=0.1.0,<=0.1.1) 2022-01-18 13:41:49,873 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2022-01-18 13:41:51,178 - octoprint.startup - INFO - Added settings overlay from plugin dashboard 2022-01-18 13:41:51,193 - octoprint.plugin.core - INFO - Found 30 plugin(s) providing 30 mixin implementations, 83 hook handlers 2022-01-18 13:41:51,238 - octoprint.server.heartbeat - INFO - Starting server heartbeat, 900.0s interval 2022-01-18 13:41:51,255 - octoprint.server - INFO - Intermediary server started 2022-01-18 13:41:51,267 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/pi/.octoprint/uploads... 2022-01-18 13:41:51,282 - octoprint.filemanager.storage - INFO - ... file metadata for /home/pi/.octoprint/uploads initialized successfully. 2022-01-18 13:41:51,285 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_SHOW (needs: "Need(method='role', value='plugin_action_command_notification_show')") 2022-01-18 13:41:51,285 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_CLEAR (needs: "Need(method='role', value='plugin_action_command_notification_clear')") 2022-01-18 13:41:51,285 - octoprint.server - INFO - Added new permission from plugin action_command_prompt: PLUGIN_ACTION_COMMAND_PROMPT_INTERACT (needs: "Need(method='role', value='plugin_action_command_prompt_interact')") 2022-01-18 13:41:51,287 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_READ (needs: "Need(method='role', value='plugin_announcements_read')") 2022-01-18 13:41:51,288 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_MANAGE (needs: "Need(method='role', value='plugin_announcements_manage'), Need(method='role', value='plugin_announcements_read')") 2022-01-18 13:41:51,288 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_ADMIN (needs: "Need(method='role', value='plugin_appkeys_admin')") 2022-01-18 13:41:51,288 - octoprint.server - INFO - Added new permission from plugin backup: PLUGIN_BACKUP_ACCESS (needs: "Need(method='role', value='plugin_backup_access')") 2022-01-18 13:41:51,288 - octoprint.server - INFO - Added new permission from plugin dashboard: PLUGIN_DASHBOARD_ADMIN (needs: "Need(method='role', value='plugin_dashboard_admin')") 2022-01-18 13:41:51,289 - octoprint.server - INFO - Added new permission from plugin firmware_check: PLUGIN_FIRMWARE_CHECK_DISPLAY (needs: "Need(method='role', value='plugin_firmware_check_display')") 2022-01-18 13:41:51,289 - octoprint.server - INFO - Added new permission from plugin logging: PLUGIN_LOGGING_MANAGE (needs: "Need(method='role', value='plugin_logging_manage')") 2022-01-18 13:41:51,289 - octoprint.server - INFO - Added new permission from plugin pi_support: PLUGIN_PI_SUPPORT_STATUS (needs: "Need(method='role', value='plugin_pi_support_check')") 2022-01-18 13:41:51,289 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_MANAGE (needs: "Need(method='role', value='plugin_pluginmanager_manage')") 2022-01-18 13:41:51,290 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_INSTALL (needs: "Need(method='role', value='plugin_pluginmanager_install'), Need(method='role', value='plugin_pluginmanager_manage')") 2022-01-18 13:41:51,290 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CHECK (needs: "Need(method='role', value='plugin_softwareupdate_check')") 2022-01-18 13:41:51,290 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_UPDATE (needs: "Need(method='role', value='plugin_softwareupdate_update')") 2022-01-18 13:41:51,292 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CONFIGURE (needs: "Need(method='role', value='plugin_softwareupdate_configure')") 2022-01-18 13:41:51,300 - octoprint.printer.standard - INFO - Using print time estimator provided by PrintTimeGenius 2022-01-18 13:41:51,301 - octoprint.printer.standard - INFO - Using print time estimator provided by SlicerEstimator 2022-01-18 13:41:52,075 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2022-01-18 13:41:52,803 - octoprint.util.pip - INFO - Version of pip is 21.3.1 2022-01-18 13:41:52,805 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-01-18 13:41:52,805 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-01-18 13:41:52,861 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk 2022-01-18 13:41:52,945 - octoprint.plugins.firmwareupdater - INFO - Python binproto2 package installed: False 2022-01-18 13:41:52,969 - octoprint.plugins.curalegacy - INFO - Migrating settings from cura to curalegacy... 2022-01-18 13:41:53,039 - octoprint.plugin.core - INFO - Initialized 30 plugin implementation(s) 2022-01-18 13:41:53,045 - octoprint.plugins.SlicerEstimator - INFO - SlicerEstimator: Setting migration from version None 2022-01-18 13:41:53,099 - octoprint - ERROR - Error while trying to migrate settings for plugin dashboard, ignoring it Traceback (most recent call last): File "/home/pi/oprint/lib/python3.9/site-packages/octoprint/__init__.py", line 522, in init_settings_plugin_config_migration_and_cleanup settings_plugin_config_migration_and_cleanup( File "/home/pi/oprint/lib/python3.9/site-packages/octoprint/__init__.py", line 507, in settings_plugin_config_migration_and_cleanup settings_migrator(settings_version, stored_version) File "/home/pi/oprint/lib/python3.9/site-packages/octoprint/util/__init__.py", line 1737, in wrapper return f(*args, **kwargs) File "/home/pi/oprint/lib/python3.9/site-packages/octoprint_dashboard/__init__.py", line 636, in on_settings_migrate if current < 2: TypeError: '<' not supported between instances of 'NoneType' and 'int' 2022-01-18 13:41:53,102 - octoprint.plugin.core - INFO - 30 plugin(s) registered with the system: | Access Anywhere - The Spaghetti Detective (1.8.9) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_thespaghettidetective | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/appkeys | Backup & Restore (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/backup | Bed Visualizer (1.1.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_bedlevelvisualizer | Core Wizard (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/corewizard | Creality Temperature (1.2.4) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_CrealityTemperature | Creality-2x-temperature-reporting-fix (0.0.4) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_ender3v2tempfix | CuraEngine Legacy (1.1.2) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_curalegacy | Dashboard (1.19.6) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_dashboard | Discovery (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/discovery | DisplayLayerProgress Plugin (1.27.2) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_DisplayLayerProgress | Error Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/errortracking | Event Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/eventmanager | File Check (2021.2.23) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_file_check | Firmware Check (2021.10.11) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmware_check | Firmware Updater (1.13.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmwareupdater | GCode Viewer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/gcodeviewer | Logging (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/logging | Octolapse (0.4.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_octolapse | Pi Support Plugin (2021.10.28) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/pluginmanager | PrintTimeGenius Plugin (2.2.8) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_PrintTimeGenius | Slicer Estimator (1.2.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_SlicerEstimator | Software Update (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/softwareupdate | TouchUI (0.3.18) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_touchui | Virtual Printer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2022-01-18 13:41:53,130 - octoprint.environment - INFO - Detected environment is Python 3.9.2 under Linux (linux). Details: | hardware: | cores: 4 | freq: 1800.0 | ram: 1909063680 | os: | bits: 32 | id: linux | platform: linux | plugins: | pi_support: | model: Raspberry Pi 4 Model B Rev 1.5 | octopi_version: 1.0.0 | throttle_state: '0x0' | python: | pip: 21.3.1 | version: 3.9.2 | virtualenv: /home/pi/oprint 2022-01-18 13:41:53,143 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/webassets... 2022-01-18 13:41:53,168 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-cache... 2022-01-18 13:41:53,771 - octoprint.plugins.firmwareupdater - INFO - Setting maximum upload size for /flash to 5243904 2022-01-18 13:41:53,772 - octoprint.server - INFO - Shutting down intermediary server... 2022-01-18 13:41:54,249 - octoprint.server - INFO - Intermediary server shut down 2022-01-18 13:41:54,252 - octoprint.events - INFO - Processing startup event, this is our first event 2022-01-18 13:41:54,262 - octoprint.events - INFO - Adding 2 events to queue that were held back before startup event 2022-01-18 13:41:54,263 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue... 2022-01-18 13:41:54,272 - octoprint.server - INFO - Autoconnect on startup is configured, trying to connect to the printer... 2022-01-18 13:41:54,275 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue 2022-01-18 13:41:54,300 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json 2022-01-18 13:41:54,349 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2022-01-18 13:41:54,703 - octoprint.plugins.tracking - INFO - Sent tracking event system_unthrottled, payload: {'throttled_now': False, 'throttled_past': False, 'throttled_mask': 0, 'throttled_voltage_now': False, 'throttled_voltage_past': False, 'throttled_overheat_now': False, 'throttled_overheat_past': False} 2022-01-18 13:41:55,062 - octoprint.server - INFO - Trying to connect to configured serial port None 2022-01-18 13:41:55,146 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2022-01-18 13:41:55,247 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder... 2022-01-18 13:41:55,267 - octoprint.server.util.watchdog - INFO - ... initial scan done. 2022-01-18 13:41:55,710 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 7 port/baudrate candidates: /dev/ttyUSB0@115200, /dev/ttyUSB0@250000, /dev/ttyUSB0@230400, /dev/ttyUSB0@57600, /dev/ttyUSB0@38400, /dev/ttyUSB0@19200, /dev/ttyUSB0@9600 2022-01-18 13:41:55,710 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200 2022-01-18 13:41:55,710 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2022-01-18 13:41:55,722 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200 2022-01-18 13:41:55,770 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-18 13:41:55,786 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 13:41:55,796 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Operational" 2022-01-18 13:41:55,805 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 13:41:55,815 - octoprint.plugins.firmwareupdater - INFO - Got CONNECTED event 2022-01-18 13:41:55,816 - octoprint.plugins.firmwareupdater - INFO - Run postflash flag is not set 2022-01-18 13:41:55,858 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin CR-6 community firmware - release 6.1 (based on Marlin 2.0.8.1) (Jun 4 2021 16:53:51)" 2022-01-18 13:41:55,870 - octoprint.plugins.firmwareupdater - INFO - Setting BINARY_FILE_TRANSFER capability to False 2022-01-18 13:41:55,909 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting 2022-01-18 13:41:55,935 - octoprint.util.comm - INFO - Firmware states that it supports emergency GCODEs to be sent without waiting for an acknowledgement first 2022-01-18 13:41:56,048 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {'firmware_name': 'Marlin CR-6 community firmware - release 6.1 (based on Marlin 2.0.8.1) (Jun 4 2021 16:53:51)', 'printer_port': None, 'printer_baudrate': 0} 2022-01-18 13:41:56,133 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2022-01-18 13:41:56,134 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-01-18 13:41:56,134 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-01-18 13:41:56,347 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk 2022-01-18 13:41:56,879 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on raspberrypi._http._tcp.local.' for _http._tcp.local. 2022-01-18 13:41:57,698 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on raspberrypi._octoprint._tcp.local.' for _octoprint._tcp.local. 2022-01-18 13:41:57,705 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance on raspberrypi for SSDP 2022-01-18 13:41:57,776 - octoprint.plugins.curalegacy - INFO - Path to CuraEngine has not been configured or does not exist (currently set to None), Cura will not be selectable for slicing 2022-01-18 13:41:57,781 - octoprint.server - INFO - Listening on http://127.0.0.1:5000 2022-01-18 13:41:57,869 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2022-01-18 13:41:57,951 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.71 2022-01-18 13:41:58,117 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 13:41:58,118 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 13:41:58,677 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2022-01-18 13:41:58,677 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-01-18 13:41:58,677 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-01-18 13:41:58,680 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 11.7GB. That is considered sufficient for updating. 2022-01-18 13:41:59,083 - octoprint.plugins.SlicerEstimator - INFO - Started up SlicerEstimator 2022-01-18 13:41:59,085 - octoprint.plugins.bedlevelvisualizer - INFO - OctoPrint-BedLevelVisualizer loaded! 2022-01-18 13:41:59,085 - octoprint.plugins.dashboard - INFO - Dashboard started 2022-01-18 13:41:59,087 - octoprint.JsFrontendErrors(Dash) - INFO - Js Logger (Dash) started 2022-01-18 13:41:59,212 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2022-01-18 13:41:59,318 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'http://192.168.1.76/', 'path': '/', 'query_string': 'l10n=en'} 2022-01-18 13:41:59,340 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 8, 'printer_state': 'OPERATIONAL'} 2022-01-18 13:41:59,376 - octoprint.plugins.thespaghettidetective - INFO - printer_discovery started, device_id: 836e5a19656942c995af05a38ca1f5de 2022-01-18 13:41:59,544 - octoprint.plugins.tracking - INFO - Sent tracking event pong, payload: {'version': '1.7.2', 'os': 'linux', 'bits': 32, 'python': '3.9.2', 'pip': '21.3.1', 'cores': 4, 'freq': 1800.0, 'ram': 1909063680, 'pi_model': 'Raspberry Pi 4 Model B Rev 1.5', 'octopi_version': '1.0.0', 'plugins': 'touchui:0.3.18,thespaghettidetective:1.8.9,slicerestimator:1.2.0,printtimegenius:2.2.8,firmwareupdater:1.13.0,dashboard:1.19.6,curalegacy:1.1.2,crealitytemperature:1.2.4,octolapse:0.4.1,displaylayerprogress:1.27.2,ender3v2tempfix:0.0.4,bedlevelvisualizer:1.1.1'} 2022-01-18 13:41:59,749 - octoprint.plugins.tracking - INFO - Sent tracking event startup, payload: {'version': '1.7.2', 'os': 'linux', 'bits': 32, 'python': '3.9.2', 'pip': '21.3.1', 'cores': 4, 'freq': 1800.0, 'ram': 1909063680, 'pi_model': 'Raspberry Pi 4 Model B Rev 1.5', 'octopi_version': '1.0.0'} 2022-01-18 13:41:59,957 - octoprint.server.util.sockjs - INFO - User pi logged in on the socket from client ::ffff:192.168.1.71 2022-01-18 13:42:00,038 - octoprint.plugins.action_command_notification - INFO - Got a notification: 0% L=-/- 2022-01-18 13:42:01,260 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 13:42:01,266 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 13:42:12,971 - octoprint.server.preemptive_cache - INFO - ... done in 13.65s 2022-01-18 13:42:13,039 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.71 2022-01-18 13:42:13,896 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.71 2022-01-18 13:42:13,930 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 13:42:13,931 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 13:42:16,341 - octoprint.server.util.sockjs - INFO - User pi logged in on the socket from client ::ffff:192.168.1.71 2022-01-18 13:42:17,034 - octoprint.plugins.tracking - INFO - Sent tracking event webui_load, payload: {'browser_name': 'Chrome', 'browser_version': '97.0.4692.71', 'os_name': 'Windows', 'os_version': '10'} 2022-01-18 13:43:42,061 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.71 2022-01-18 13:43:46,377 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 13:43:46,377 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 13:43:47,805 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.71 2022-01-18 13:43:47,842 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 13:43:47,842 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 13:43:50,751 - octoprint.server.util.sockjs - INFO - User pi logged in on the socket from client ::ffff:192.168.1.71 2022-01-18 13:43:51,601 - octoprint.plugins.tracking - INFO - Sent tracking event webui_load, payload: {'browser_name': 'Chrome', 'browser_version': '97.0.4692.71', 'os_name': 'Windows', 'os_version': '10'} 2022-01-18 13:44:43,371 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 13:44:43,371 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 13:44:43,496 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.71 2022-01-18 13:44:43,979 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.71 2022-01-18 13:44:44,000 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 13:44:44,000 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 13:44:47,666 - octoprint.server.util.sockjs - INFO - User pi logged in on the socket from client ::ffff:192.168.1.71 2022-01-18 13:44:48,353 - octoprint.plugins.tracking - INFO - Sent tracking event webui_load, payload: {'browser_name': 'Chrome', 'browser_version': '97.0.4692.71', 'os_name': 'Windows', 'os_version': '10'} 2022-01-18 13:46:57,853 - octoprint.plugins.thespaghettidetective - INFO - printer_discovery got incoming msg: {'device_id': '836e5a19656942c995af05a38ca1f5de', 'type': 'verify_code', 'data': {'code': '031311', 'secret': 'eadf516600cf1b13913e414717412bf4d5e33d78f20c03f9cbdaeb491bfc242b'}} 2022-01-18 13:46:58,231 - octoprint.plugins.thespaghettidetective - INFO - printer_discovery verified code succesfully 2022-01-18 13:46:58,234 - octoprint.plugins.thespaghettidetective - INFO - printer_discovery is stopping 2022-01-18 13:46:59,499 - octoprint.plugins.thespaghettidetective - INFO - Linked printer: {'is_pro': True, 'id': 95565, 'name': 'My Awesome Cloud Printer'} 2022-01-18 13:46:59,510 - octoprint.plugins.thespaghettidetective - INFO - Starting webcam streamer 2022-01-18 13:47:00,589 - backoff - INFO - Backing off wait_for_janus(...) for 0.5s (ConnectionRefusedError: [Errno 111] Connection refused) 2022-01-18 13:47:01,469 - octoprint.plugins.thespaghettidetective - WARNING - No camera detected. Skipping webcam streaming 2022-01-18 13:47:02,053 - backoff - INFO - Backing off wait_for_janus(...) for 0.2s (ConnectionRefusedError: [Errno 111] Connection refused) 2022-01-18 13:47:03,301 - backoff - INFO - Backing off wait_for_janus(...) for 2.0s (ConnectionRefusedError: [Errno 111] Connection refused) 2022-01-18 13:48:15,814 - octoprint.printer.standard.job - INFO - Print job selected - origin: local, path: CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode, owner: pi, user: pi 2022-01-18 13:48:15,845 - octoprint.plugins.DisplayLayerProgress - INFO - File '/home/pi/.octoprint/uploads/CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode' selected. Determining number of layers. 2022-01-18 13:48:15,853 - octoprint.plugins.DisplayLayerProgress - INFO - Read total height from MetaFile 2022-01-18 13:48:16,906 - octoprint.plugins.DisplayLayerProgress - WARNING - No LayerIndicator found!!! 2022-01-18 13:48:16,909 - octoprint.plugins.DisplayLayerProgress - INFO - File select-event processing done!' 2022-01-18 13:48:34,967 - octoprint.util.comm - INFO - Starting job on behalf of user pi 2022-01-18 13:48:34,974 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting" 2022-01-18 13:48:34,983 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode, owner: pi, user: pi 2022-01-18 13:48:35,077 - octoprint.util.comm - INFO - Cancelling job on behalf of plugin octolapse 2022-01-18 13:48:35,087 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Cancelling" 2022-01-18 13:48:35,091 - octoprint.util.comm - INFO - Force-sending M108 to the printer 2022-01-18 13:48:35,107 - octoprint.plugins.DisplayLayerProgress - INFO - Printing started. Detailed progress started.{'name': 'CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode', 'path': 'CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode', 'origin': 'local', 'size': 10096330, 'owner': 'pi', 'user': 'pi'} 2022-01-18 13:48:35,112 - octoprint.printer.standard.job - INFO - Print job cancelled - origin: local, path: CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode, owner: pi, user: None 2022-01-18 13:48:35,130 - octoprint.plugins.SlicerEstimator - INFO - Detected Cura 2022-01-18 13:48:35,141 - octoprint.plugins.dashboard - INFO - Gcode not pre-processed by Dashboard. Processing now. 2022-01-18 13:48:35,173 - octoprint.plugins.dashboard - INFO - GcodePreProcessor started processing. 2022-01-18 13:48:35,177 - octoprint.util.comm - INFO - Changing monitoring state from "Cancelling" to "Printing" 2022-01-18 13:48:35,245 - octoprint.plugins.action_command_notification - INFO - Got a notification: CR6Comm-Rel6.1 Ready. 2022-01-18 13:48:35,282 - octoprint.plugins.action_command_notification - INFO - Got a notification: CR6Comm-Rel6.1 Ready. 2022-01-18 13:48:35,313 - octoprint.plugins.tracking - INFO - Sent tracking event print_started, payload: {'origin': 'local', 'file': '73da9fe1157f6619f8666e1b02fb2b0562c691db'} 2022-01-18 13:48:35,318 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Operational" 2022-01-18 13:48:40,181 - octoprint.plugins.dashboard - INFO - Gcode pre-processing done. 2022-01-18 13:48:40,182 - octoprint.plugins.dashboard - INFO - GcodePreProcessor found layers: 219 2022-01-18 13:48:40,182 - octoprint.plugins.dashboard - INFO - GcodePreProcessor found filament changes: 0 2022-01-18 13:48:40,182 - octoprint.plugins.dashboard - INFO - GcodePreProcessor saving layer count in file metadata 2022-01-18 13:48:40,233 - octoprint.plugins.DisplayLayerProgress - INFO - Printing stopped. Detailed progress stopped. 2022-01-18 13:48:40,297 - octoprint.plugins.DisplayLayerProgress - INFO - Printing stopped. Detailed progress stopped. 2022-01-18 13:48:40,406 - octoprint.plugins.tracking - INFO - Sent tracking event print_cancelled, payload: {'origin': 'local', 'file': '73da9fe1157f6619f8666e1b02fb2b0562c691db'} 2022-01-18 13:48:40,559 - octoprint.plugins.tracking - INFO - Sent tracking event print_failed, payload: {'origin': 'local', 'file': '73da9fe1157f6619f8666e1b02fb2b0562c691db', 'reason': 'cancelled'} 2022-01-18 13:49:00,235 - octoprint.util.comm - INFO - Starting job on behalf of user pi 2022-01-18 13:49:00,239 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting" 2022-01-18 13:49:00,253 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode, owner: pi, user: pi 2022-01-18 13:49:00,334 - octoprint.util.comm - INFO - Cancelling job on behalf of plugin octolapse 2022-01-18 13:49:00,345 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Cancelling" 2022-01-18 13:49:00,346 - octoprint.util.comm - INFO - Force-sending M108 to the printer 2022-01-18 13:49:00,362 - octoprint.plugins.DisplayLayerProgress - INFO - Printing started. Detailed progress started.{'name': 'CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode', 'path': 'CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode', 'origin': 'local', 'size': 10096330, 'owner': 'pi', 'user': 'pi'} 2022-01-18 13:49:00,367 - octoprint.printer.standard.job - INFO - Print job cancelled - origin: local, path: CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode, owner: pi, user: None 2022-01-18 13:49:00,369 - octoprint.plugins.SlicerEstimator - INFO - Detected Cura 2022-01-18 13:49:00,378 - octoprint.util.comm - INFO - Changing monitoring state from "Cancelling" to "Printing" 2022-01-18 13:49:00,406 - octoprint.plugins.action_command_notification - INFO - Got a notification: CR6Comm-Rel6.1 Ready. 2022-01-18 13:49:00,451 - octoprint.plugins.DisplayLayerProgress - INFO - Printing stopped. Detailed progress stopped. 2022-01-18 13:49:00,455 - octoprint.plugins.action_command_notification - INFO - Got a notification: CR6Comm-Rel6.1 Ready. 2022-01-18 13:49:00,473 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Operational" 2022-01-18 13:49:00,527 - octoprint.plugins.tracking - INFO - Sent tracking event print_started, payload: {'origin': 'local', 'file': '73da9fe1157f6619f8666e1b02fb2b0562c691db'} 2022-01-18 13:49:00,537 - octoprint.plugins.DisplayLayerProgress - INFO - Printing stopped. Detailed progress stopped. 2022-01-18 13:49:00,681 - octoprint.plugins.tracking - INFO - Sent tracking event print_cancelled, payload: {'origin': 'local', 'file': '73da9fe1157f6619f8666e1b02fb2b0562c691db'} 2022-01-18 13:49:00,846 - octoprint.plugins.tracking - INFO - Sent tracking event print_failed, payload: {'origin': 'local', 'file': '73da9fe1157f6619f8666e1b02fb2b0562c691db', 'reason': 'cancelled'} 2022-01-18 13:50:09,552 - octoprint.plugins.tracking - INFO - Sent tracking event disable_plugin, payload: {'plugin': 'octolapse', 'plugin_version': '0.4.1'} 2022-01-18 13:50:28,278 - octoprint.server.api.system - INFO - Performing command for core:restart: sudo service octoprint restart 2022-01-18 13:51:59,467 - octoprint.startup - INFO - ****************************************************************************** 2022-01-18 13:51:59,468 - octoprint.startup - INFO - Starting OctoPrint 1.7.2 2022-01-18 13:51:59,469 - octoprint.startup - INFO - ****************************************************************************** 2022-01-18 13:51:59,748 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity changed from offline to online 2022-01-18 13:51:59,842 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: online 2022-01-18 13:51:59,842 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 8.8.8.8:53 is working 2022-01-18 13:51:59,842 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is working 2022-01-18 13:52:00,010 - octoprint.startup - INFO - Blacklist processing done, adding 3 blacklisted plugin versions: roomtemp (any), GcodeEditor (>=0.1.1,<=0.2.8), gcodeleveling (>=0.1.0,<=0.1.1) 2022-01-18 13:52:00,010 - octoprint.plugin.core - WARNING - Invalid version requirement >=0.1.1,<=0.2.8 for blacklist entry GcodeEditor, ignoring 2022-01-18 13:52:00,010 - octoprint.plugin.core - WARNING - Invalid version requirement >=0.1.0,<=0.1.1 for blacklist entry gcodeleveling, ignoring 2022-01-18 13:52:00,038 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2022-01-18 13:52:01,123 - octoprint.plugin.core - INFO - Plugin Octolapse (0.4.1) is disabled. 2022-01-18 13:52:01,266 - octoprint.startup - INFO - Added settings overlay from plugin dashboard 2022-01-18 13:52:01,277 - octoprint.plugin.core - INFO - Found 30 plugin(s) providing 29 mixin implementations, 74 hook handlers 2022-01-18 13:52:01,334 - octoprint.server.heartbeat - INFO - Starting server heartbeat, 900.0s interval 2022-01-18 13:52:01,350 - octoprint.server - INFO - Intermediary server started 2022-01-18 13:52:01,363 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/pi/.octoprint/uploads... 2022-01-18 13:52:01,378 - octoprint.filemanager.storage - INFO - ... file metadata for /home/pi/.octoprint/uploads initialized successfully. 2022-01-18 13:52:01,381 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_SHOW (needs: "Need(method='role', value='plugin_action_command_notification_show')") 2022-01-18 13:52:01,381 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_CLEAR (needs: "Need(method='role', value='plugin_action_command_notification_clear')") 2022-01-18 13:52:01,381 - octoprint.server - INFO - Added new permission from plugin action_command_prompt: PLUGIN_ACTION_COMMAND_PROMPT_INTERACT (needs: "Need(method='role', value='plugin_action_command_prompt_interact')") 2022-01-18 13:52:01,383 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_READ (needs: "Need(method='role', value='plugin_announcements_read')") 2022-01-18 13:52:01,383 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_MANAGE (needs: "Need(method='role', value='plugin_announcements_read'), Need(method='role', value='plugin_announcements_manage')") 2022-01-18 13:52:01,384 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_ADMIN (needs: "Need(method='role', value='plugin_appkeys_admin')") 2022-01-18 13:52:01,384 - octoprint.server - INFO - Added new permission from plugin backup: PLUGIN_BACKUP_ACCESS (needs: "Need(method='role', value='plugin_backup_access')") 2022-01-18 13:52:01,384 - octoprint.server - INFO - Added new permission from plugin dashboard: PLUGIN_DASHBOARD_ADMIN (needs: "Need(method='role', value='plugin_dashboard_admin')") 2022-01-18 13:52:01,384 - octoprint.server - INFO - Added new permission from plugin firmware_check: PLUGIN_FIRMWARE_CHECK_DISPLAY (needs: "Need(method='role', value='plugin_firmware_check_display')") 2022-01-18 13:52:01,384 - octoprint.server - INFO - Added new permission from plugin logging: PLUGIN_LOGGING_MANAGE (needs: "Need(method='role', value='plugin_logging_manage')") 2022-01-18 13:52:01,385 - octoprint.server - INFO - Added new permission from plugin pi_support: PLUGIN_PI_SUPPORT_STATUS (needs: "Need(method='role', value='plugin_pi_support_check')") 2022-01-18 13:52:01,385 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_MANAGE (needs: "Need(method='role', value='plugin_pluginmanager_manage')") 2022-01-18 13:52:01,385 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_INSTALL (needs: "Need(method='role', value='plugin_pluginmanager_manage'), Need(method='role', value='plugin_pluginmanager_install')") 2022-01-18 13:52:01,386 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CHECK (needs: "Need(method='role', value='plugin_softwareupdate_check')") 2022-01-18 13:52:01,386 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_UPDATE (needs: "Need(method='role', value='plugin_softwareupdate_update')") 2022-01-18 13:52:01,387 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CONFIGURE (needs: "Need(method='role', value='plugin_softwareupdate_configure')") 2022-01-18 13:52:01,396 - octoprint.printer.standard - INFO - Using print time estimator provided by PrintTimeGenius 2022-01-18 13:52:01,397 - octoprint.printer.standard - INFO - Using print time estimator provided by SlicerEstimator 2022-01-18 13:52:02,160 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2022-01-18 13:52:02,885 - octoprint.util.pip - INFO - Version of pip is 21.3.1 2022-01-18 13:52:02,887 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-01-18 13:52:02,887 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-01-18 13:52:02,990 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk 2022-01-18 13:52:03,074 - octoprint.plugins.firmwareupdater - INFO - Python binproto2 package installed: False 2022-01-18 13:52:03,122 - octoprint.plugin.core - INFO - Initialized 29 plugin implementation(s) 2022-01-18 13:52:03,133 - octoprint.plugin.core - INFO - 30 plugin(s) registered with the system: | Access Anywhere - The Spaghetti Detective (1.8.9) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_thespaghettidetective | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/appkeys | Backup & Restore (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/backup | Bed Visualizer (1.1.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_bedlevelvisualizer | Core Wizard (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/corewizard | Creality Temperature (1.2.4) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_CrealityTemperature | Creality-2x-temperature-reporting-fix (0.0.4) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_ender3v2tempfix | CuraEngine Legacy (1.1.2) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_curalegacy | Dashboard (1.19.6) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_dashboard | Discovery (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/discovery | DisplayLayerProgress Plugin (1.27.2) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_DisplayLayerProgress | Error Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/errortracking | Event Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/eventmanager | File Check (2021.2.23) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_file_check | Firmware Check (2021.10.11) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmware_check | Firmware Updater (1.13.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmwareupdater | GCode Viewer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/gcodeviewer | Logging (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/logging | !Octolapse (0.4.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_octolapse | Pi Support Plugin (2021.10.28) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/pluginmanager | PrintTimeGenius Plugin (2.2.8) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_PrintTimeGenius | Slicer Estimator (1.2.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_SlicerEstimator | Software Update (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/softwareupdate | TouchUI (0.3.18) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_touchui | Virtual Printer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2022-01-18 13:52:03,157 - octoprint.environment - INFO - Detected environment is Python 3.9.2 under Linux (linux). Details: | hardware: | cores: 4 | freq: 1800.0 | ram: 1909063680 | os: | bits: 32 | id: linux | platform: linux | plugins: | pi_support: | model: Raspberry Pi 4 Model B Rev 1.5 | octopi_version: 1.0.0 | throttle_state: '0x0' | python: | pip: 21.3.1 | version: 3.9.2 | virtualenv: /home/pi/oprint 2022-01-18 13:52:03,171 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/webassets... 2022-01-18 13:52:03,197 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-cache... 2022-01-18 13:52:03,655 - octoprint.plugins.firmwareupdater - INFO - Setting maximum upload size for /flash to 5243904 2022-01-18 13:52:03,656 - octoprint.server - INFO - Shutting down intermediary server... 2022-01-18 13:52:03,694 - octoprint.server - INFO - Intermediary server shut down 2022-01-18 13:52:03,696 - octoprint.events - INFO - Processing startup event, this is our first event 2022-01-18 13:52:03,696 - octoprint.events - INFO - Adding 2 events to queue that were held back before startup event 2022-01-18 13:52:03,701 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue... 2022-01-18 13:52:03,701 - octoprint.server - INFO - Autoconnect on startup is configured, trying to connect to the printer... 2022-01-18 13:52:03,710 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue 2022-01-18 13:52:03,710 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json 2022-01-18 13:52:03,764 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2022-01-18 13:52:04,015 - octoprint.plugins.tracking - INFO - Sent tracking event system_unthrottled, payload: {'throttled_now': False, 'throttled_past': False, 'throttled_mask': 0, 'throttled_voltage_now': False, 'throttled_voltage_past': False, 'throttled_overheat_now': False, 'throttled_overheat_past': False} 2022-01-18 13:52:04,184 - octoprint.server - INFO - Trying to connect to configured serial port None 2022-01-18 13:52:04,276 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2022-01-18 13:52:04,312 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder... 2022-01-18 13:52:04,413 - octoprint.server.util.watchdog - INFO - ... initial scan done. 2022-01-18 13:52:04,708 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 7 port/baudrate candidates: /dev/ttyUSB0@115200, /dev/ttyUSB0@250000, /dev/ttyUSB0@230400, /dev/ttyUSB0@57600, /dev/ttyUSB0@38400, /dev/ttyUSB0@19200, /dev/ttyUSB0@9600 2022-01-18 13:52:04,709 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200 2022-01-18 13:52:04,709 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200 2022-01-18 13:52:04,825 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-18 13:52:04,850 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 13:52:04,853 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2022-01-18 13:52:04,862 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Operational" 2022-01-18 13:52:04,867 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 13:52:04,872 - octoprint.plugins.firmwareupdater - INFO - Got CONNECTED event 2022-01-18 13:52:04,873 - octoprint.plugins.firmwareupdater - INFO - Run postflash flag is not set 2022-01-18 13:52:04,918 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin CR-6 community firmware - release 6.1 (based on Marlin 2.0.8.1) (Jun 4 2021 16:53:51)" 2022-01-18 13:52:04,923 - octoprint.plugins.firmwareupdater - INFO - Setting BINARY_FILE_TRANSFER capability to False 2022-01-18 13:52:04,960 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting 2022-01-18 13:52:04,970 - octoprint.util.comm - INFO - Firmware states that it supports emergency GCODEs to be sent without waiting for an acknowledgement first 2022-01-18 13:52:05,087 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {'firmware_name': 'Marlin CR-6 community firmware - release 6.1 (based on Marlin 2.0.8.1) (Jun 4 2021 16:53:51)', 'printer_port': None, 'printer_baudrate': 0} 2022-01-18 13:52:05,303 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on raspberrypi._http._tcp.local.' for _http._tcp.local. 2022-01-18 13:52:06,121 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on raspberrypi._octoprint._tcp.local.' for _octoprint._tcp.local. 2022-01-18 13:52:06,125 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance on raspberrypi for SSDP 2022-01-18 13:52:06,183 - octoprint.plugins.curalegacy - INFO - Path to CuraEngine has not been configured or does not exist (currently set to None), Cura will not be selectable for slicing 2022-01-18 13:52:06,187 - octoprint.server - INFO - Listening on http://127.0.0.1:5000 2022-01-18 13:52:06,300 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2022-01-18 13:52:06,448 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.71 2022-01-18 13:52:06,644 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 13:52:06,645 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 13:52:07,119 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2022-01-18 13:52:07,125 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-01-18 13:52:07,136 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-01-18 13:52:07,149 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 11.7GB. That is considered sufficient for updating. 2022-01-18 13:52:07,392 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2022-01-18 13:52:07,519 - octoprint.plugins.SlicerEstimator - INFO - Started up SlicerEstimator 2022-01-18 13:52:07,520 - octoprint.plugins.bedlevelvisualizer - INFO - OctoPrint-BedLevelVisualizer loaded! 2022-01-18 13:52:07,520 - octoprint.plugins.dashboard - INFO - Dashboard started 2022-01-18 13:52:07,523 - octoprint.JsFrontendErrors(Dash) - INFO - Js Logger (Dash) started 2022-01-18 13:52:07,748 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'http://192.168.1.76/', 'path': '/', 'query_string': 'l10n=en'} 2022-01-18 13:52:07,786 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 6, 'printer_state': 'OPERATIONAL'} 2022-01-18 13:52:08,042 - octoprint.plugins.tracking - INFO - Sent tracking event pong, payload: {'version': '1.7.2', 'os': 'linux', 'bits': 32, 'python': '3.9.2', 'pip': '21.3.1', 'cores': 4, 'freq': 1800.0, 'ram': 1909063680, 'pi_model': 'Raspberry Pi 4 Model B Rev 1.5', 'octopi_version': '1.0.0', 'plugins': 'touchui:0.3.18,thespaghettidetective:1.8.9,slicerestimator:1.2.0,printtimegenius:2.2.8,firmwareupdater:1.13.0,dashboard:1.19.6,curalegacy:1.1.2,crealitytemperature:1.2.4,displaylayerprogress:1.27.2,ender3v2tempfix:0.0.4,bedlevelvisualizer:1.1.1'} 2022-01-18 13:52:08,174 - octoprint.plugins.thespaghettidetective - INFO - Linked printer: {'is_pro': True, 'id': 95565, 'name': 'My Awesome Cloud Printer'} 2022-01-18 13:52:08,215 - octoprint.plugins.thespaghettidetective - INFO - Starting webcam streamer 2022-01-18 13:52:08,381 - octoprint.plugins.tracking - INFO - Sent tracking event startup, payload: {'version': '1.7.2', 'os': 'linux', 'bits': 32, 'python': '3.9.2', 'pip': '21.3.1', 'cores': 4, 'freq': 1800.0, 'ram': 1909063680, 'pi_model': 'Raspberry Pi 4 Model B Rev 1.5', 'octopi_version': '1.0.0'} 2022-01-18 13:52:08,607 - octoprint.plugins.action_command_notification - INFO - Got a notification: 0% L=-/- 2022-01-18 13:52:09,091 - octoprint.server.util.sockjs - INFO - User pi logged in on the socket from client ::ffff:192.168.1.71 2022-01-18 13:52:09,232 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 13:52:09,232 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 13:52:09,545 - backoff - INFO - Backing off wait_for_janus(...) for 0.4s (ConnectionRefusedError: [Errno 111] Connection refused) 2022-01-18 13:52:10,263 - octoprint.plugins.thespaghettidetective - WARNING - No camera detected. Skipping webcam streaming 2022-01-18 13:52:19,450 - octoprint.server.preemptive_cache - INFO - ... done in 11.70s 2022-01-18 13:52:19,785 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.71 2022-01-18 13:52:20,433 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.71 2022-01-18 13:52:20,521 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 13:52:20,521 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 13:52:22,570 - octoprint.server.util.sockjs - INFO - User pi logged in on the socket from client ::ffff:192.168.1.71 2022-01-18 13:52:23,246 - octoprint.plugins.tracking - INFO - Sent tracking event webui_load, payload: {'browser_name': 'Chrome', 'browser_version': '97.0.4692.71', 'os_name': 'Windows', 'os_version': '10'} 2022-01-18 13:53:49,318 - octoprint.plugins.thespaghettidetective - WARNING - Server WS ERROR: [Errno 104] Connection reset by peer 2022-01-18 13:53:49,320 - octoprint.plugins.thespaghettidetective - WARNING - WS Closed 2022-01-18 13:55:02,991 - octoprint.plugins.dashboard - ERROR - Frontend javascript error detected (this error is not necesarily to do with dashboard): Message: Uncaught TypeError: items is not iterable - URL: http://192.168.1.76/static/webassets/packed_plugins.js?cd83bafd - Line: 682 - Column: 32 - Error object: {} 2022-01-18 13:55:02,992 - octoprint.JsFrontendErrors(Dash) - ERROR - Message: Uncaught TypeError: items is not iterable - URL: http://192.168.1.76/static/webassets/packed_plugins.js?cd83bafd - Line: 682 - Column: 32 - Error object: {} 2022-01-18 13:55:12,437 - octoprint.filemanager.analysis - INFO - Starting analysis of local:CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode 2022-01-18 13:55:12,441 - octoprint.filemanager.analysis - INFO - Invoking analysis command: /home/pi/oprint/bin/python -m octoprint analysis gcode --speed-x=6000 --speed-y=6000 --max-t=10 --throttle=0.0 --throttle-lines=100 --bed-z=0.0 /home/pi/.octoprint/uploads/CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode 2022-01-18 13:55:31,459 - octoprint.plugins.SlicerEstimator - INFO - Detected Cura 2022-01-18 13:55:32,459 - octoprint.filemanager.analysis - INFO - Found 40087.0s from slicer for file CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode 2022-01-18 13:55:32,460 - octoprint.filemanager.analysis - INFO - Analysis of entry local:CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode finished, needed 20.02s 2022-01-18 13:56:33,090 - octoprint.filemanager.analysis - INFO - Starting analysis of local:CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode 2022-01-18 13:56:33,092 - octoprint.filemanager.analysis - INFO - Invoking analysis command: /home/pi/oprint/bin/python -m octoprint analysis gcode --speed-x=6000 --speed-y=6000 --max-t=10 --throttle=0.0 --throttle-lines=100 --bed-z=0.0 /home/pi/.octoprint/uploads/CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode 2022-01-18 13:56:52,347 - octoprint.plugins.SlicerEstimator - INFO - Detected Cura 2022-01-18 13:56:53,348 - octoprint.filemanager.analysis - INFO - Found 40087.0s from slicer for file CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode 2022-01-18 13:56:53,348 - octoprint.filemanager.analysis - INFO - Analysis of entry local:CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode finished, needed 20.26s 2022-01-18 13:58:44,036 - octoprint.plugins.thespaghettidetective - WARNING - Server WS ERROR: Connection is already closed. 2022-01-18 13:58:44,037 - octoprint.plugins.thespaghettidetective - WARNING - WS Closed 2022-01-18 13:59:22,639 - octoprint.printer.standard.job - INFO - Print job selected - origin: local, path: CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode, owner: pi, user: pi 2022-01-18 13:59:22,666 - octoprint.plugins.DisplayLayerProgress - INFO - File '/home/pi/.octoprint/uploads/CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode' selected. Determining number of layers. 2022-01-18 13:59:22,675 - octoprint.plugins.DisplayLayerProgress - INFO - Read total height from MetaFile 2022-01-18 13:59:23,781 - octoprint.plugins.DisplayLayerProgress - WARNING - No LayerIndicator found!!! 2022-01-18 13:59:23,785 - octoprint.plugins.DisplayLayerProgress - INFO - File select-event processing done!' 2022-01-18 13:59:24,582 - octoprint.util.comm - INFO - Starting job on behalf of user pi 2022-01-18 13:59:24,584 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting" 2022-01-18 13:59:24,586 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode, owner: pi, user: pi 2022-01-18 13:59:24,609 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 13:59:24,617 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Printing" 2022-01-18 13:59:24,653 - octoprint.plugins.action_command_notification - INFO - Got a notification: Time Left 11h08m07s 2022-01-18 13:59:24,664 - octoprint.plugins.DisplayLayerProgress - INFO - Printing started. Detailed progress started.{'name': 'CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode', 'path': 'CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode', 'origin': 'local', 'size': 10104060, 'owner': 'pi', 'user': 'pi'} 2022-01-18 13:59:24,675 - octoprint.plugins.SlicerEstimator - INFO - Detected Cura 2022-01-18 13:59:24,717 - octoprint.plugins.action_command_notification - INFO - Got a notification: Bed Heating... 2022-01-18 13:59:24,820 - octoprint.plugins.tracking - INFO - Sent tracking event print_started, payload: {'origin': 'local', 'file': '73da9fe1157f6619f8666e1b02fb2b0562c691db'} 2022-01-18 13:59:25,406 - backoff - INFO - Backing off capture_jpeg(...) for 0.4s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 13:59:25,804 - backoff - INFO - Backing off capture_jpeg(...) for 0.9s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 13:59:26,712 - octoprint.util.comm - INFO - Printer seems to support the busy protocol, will adjust timeouts and set busy interval accordingly 2022-01-18 13:59:26,721 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 13:59:35,756 - backoff - INFO - Backing off capture_jpeg(...) for 0.7s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 13:59:36,450 - backoff - INFO - Backing off capture_jpeg(...) for 0.0s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 13:59:36,474 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 13:59:46,501 - backoff - INFO - Backing off capture_jpeg(...) for 0.8s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 13:59:47,294 - backoff - INFO - Backing off capture_jpeg(...) for 2.0s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 13:59:49,293 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 13:59:57,321 - backoff - INFO - Backing off capture_jpeg(...) for 0.3s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 13:59:57,606 - backoff - INFO - Backing off capture_jpeg(...) for 0.3s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 13:59:57,907 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:00:07,942 - backoff - INFO - Backing off capture_jpeg(...) for 0.6s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:00:08,570 - backoff - INFO - Backing off capture_jpeg(...) for 1.0s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:00:09,533 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:00:18,564 - backoff - INFO - Backing off capture_jpeg(...) for 0.9s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:00:19,491 - backoff - INFO - Backing off capture_jpeg(...) for 1.7s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:00:21,180 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:00:27,558 - octoprint.util.comm - INFO - Cancelling job on behalf of user pi 2022-01-18 14:00:27,561 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Cancelling" 2022-01-18 14:00:27,569 - octoprint.util.comm - INFO - Force-sending M108 to the printer 2022-01-18 14:00:27,591 - octoprint.util.comm - INFO - Telling the printer to set the busy interval to our "communicationBusy" timeout - 1s = 2s 2022-01-18 14:00:27,602 - octoprint.printer.standard.job - INFO - Print job cancelled - origin: local, path: CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode, owner: pi, user: pi 2022-01-18 14:00:27,709 - octoprint.plugins.DisplayLayerProgress - INFO - Printing stopped. Detailed progress stopped. 2022-01-18 14:00:27,815 - octoprint.plugins.DisplayLayerProgress - INFO - Printing stopped. Detailed progress stopped. 2022-01-18 14:00:27,827 - octoprint.plugins.action_command_notification - INFO - Got a notification: CR6Comm-Rel6.1 Ready. 2022-01-18 14:00:27,848 - octoprint.util.comm - INFO - Changing monitoring state from "Cancelling" to "Operational" 2022-01-18 14:00:27,928 - octoprint.plugins.tracking - INFO - Sent tracking event print_cancelled, payload: {'origin': 'local', 'file': '73da9fe1157f6619f8666e1b02fb2b0562c691db', 'elapsed': 63} 2022-01-18 14:00:28,075 - octoprint.plugins.tracking - INFO - Sent tracking event print_failed, payload: {'origin': 'local', 'file': '73da9fe1157f6619f8666e1b02fb2b0562c691db', 'elapsed': 63, 'reason': 'cancelled'} 2022-01-18 14:00:42,208 - octoprint.plugins.tracking - INFO - Sent tracking event disable_plugin, payload: {'plugin': 'DisplayLayerProgress', 'plugin_version': '1.27.2'} 2022-01-18 14:00:48,295 - octoprint.server.api.system - INFO - Performing command for core:restart: sudo service octoprint restart 2022-01-18 14:02:19,469 - octoprint.startup - INFO - ****************************************************************************** 2022-01-18 14:02:19,470 - octoprint.startup - INFO - Starting OctoPrint 1.7.2 2022-01-18 14:02:19,471 - octoprint.startup - INFO - ****************************************************************************** 2022-01-18 14:02:19,752 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity changed from offline to online 2022-01-18 14:02:19,865 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: online 2022-01-18 14:02:19,866 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 8.8.8.8:53 is working 2022-01-18 14:02:19,866 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is working 2022-01-18 14:02:19,870 - octoprint.startup - INFO - Blacklist processing done, adding 3 blacklisted plugin versions: roomtemp (any), GcodeEditor (>=0.1.1,<=0.2.8), gcodeleveling (>=0.1.0,<=0.1.1) 2022-01-18 14:02:19,895 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2022-01-18 14:02:20,985 - octoprint.plugin.core - INFO - Plugin Octolapse (0.4.1) is disabled. 2022-01-18 14:02:21,024 - octoprint.plugin.core - INFO - Plugin DisplayLayerProgress Plugin (1.27.2) is disabled. 2022-01-18 14:02:21,123 - octoprint.startup - INFO - Added settings overlay from plugin dashboard 2022-01-18 14:02:21,131 - octoprint.plugin.core - INFO - Found 30 plugin(s) providing 28 mixin implementations, 71 hook handlers 2022-01-18 14:02:21,188 - octoprint.server.heartbeat - INFO - Starting server heartbeat, 900.0s interval 2022-01-18 14:02:21,204 - octoprint.server - INFO - Intermediary server started 2022-01-18 14:02:21,217 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/pi/.octoprint/uploads... 2022-01-18 14:02:21,231 - octoprint.filemanager.storage - INFO - ... file metadata for /home/pi/.octoprint/uploads initialized successfully. 2022-01-18 14:02:21,234 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_SHOW (needs: "Need(method='role', value='plugin_action_command_notification_show')") 2022-01-18 14:02:21,234 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_CLEAR (needs: "Need(method='role', value='plugin_action_command_notification_clear')") 2022-01-18 14:02:21,234 - octoprint.server - INFO - Added new permission from plugin action_command_prompt: PLUGIN_ACTION_COMMAND_PROMPT_INTERACT (needs: "Need(method='role', value='plugin_action_command_prompt_interact')") 2022-01-18 14:02:21,235 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_READ (needs: "Need(method='role', value='plugin_announcements_read')") 2022-01-18 14:02:21,235 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_MANAGE (needs: "Need(method='role', value='plugin_announcements_read'), Need(method='role', value='plugin_announcements_manage')") 2022-01-18 14:02:21,235 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_ADMIN (needs: "Need(method='role', value='plugin_appkeys_admin')") 2022-01-18 14:02:21,236 - octoprint.server - INFO - Added new permission from plugin backup: PLUGIN_BACKUP_ACCESS (needs: "Need(method='role', value='plugin_backup_access')") 2022-01-18 14:02:21,236 - octoprint.server - INFO - Added new permission from plugin dashboard: PLUGIN_DASHBOARD_ADMIN (needs: "Need(method='role', value='plugin_dashboard_admin')") 2022-01-18 14:02:21,236 - octoprint.server - INFO - Added new permission from plugin firmware_check: PLUGIN_FIRMWARE_CHECK_DISPLAY (needs: "Need(method='role', value='plugin_firmware_check_display')") 2022-01-18 14:02:21,236 - octoprint.server - INFO - Added new permission from plugin logging: PLUGIN_LOGGING_MANAGE (needs: "Need(method='role', value='plugin_logging_manage')") 2022-01-18 14:02:21,237 - octoprint.server - INFO - Added new permission from plugin pi_support: PLUGIN_PI_SUPPORT_STATUS (needs: "Need(method='role', value='plugin_pi_support_check')") 2022-01-18 14:02:21,237 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_MANAGE (needs: "Need(method='role', value='plugin_pluginmanager_manage')") 2022-01-18 14:02:21,237 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_INSTALL (needs: "Need(method='role', value='plugin_pluginmanager_install'), Need(method='role', value='plugin_pluginmanager_manage')") 2022-01-18 14:02:21,237 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CHECK (needs: "Need(method='role', value='plugin_softwareupdate_check')") 2022-01-18 14:02:21,238 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_UPDATE (needs: "Need(method='role', value='plugin_softwareupdate_update')") 2022-01-18 14:02:21,238 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CONFIGURE (needs: "Need(method='role', value='plugin_softwareupdate_configure')") 2022-01-18 14:02:21,246 - octoprint.printer.standard - INFO - Using print time estimator provided by PrintTimeGenius 2022-01-18 14:02:21,248 - octoprint.printer.standard - INFO - Using print time estimator provided by SlicerEstimator 2022-01-18 14:02:22,018 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2022-01-18 14:02:22,744 - octoprint.util.pip - INFO - Version of pip is 21.3.1 2022-01-18 14:02:22,746 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-01-18 14:02:22,746 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-01-18 14:02:22,849 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk 2022-01-18 14:02:22,937 - octoprint.plugins.firmwareupdater - INFO - Python binproto2 package installed: False 2022-01-18 14:02:22,970 - octoprint.plugin.core - INFO - Initialized 28 plugin implementation(s) 2022-01-18 14:02:22,980 - octoprint.plugin.core - INFO - 30 plugin(s) registered with the system: | Access Anywhere - The Spaghetti Detective (1.8.9) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_thespaghettidetective | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/appkeys | Backup & Restore (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/backup | Bed Visualizer (1.1.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_bedlevelvisualizer | Core Wizard (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/corewizard | Creality Temperature (1.2.4) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_CrealityTemperature | Creality-2x-temperature-reporting-fix (0.0.4) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_ender3v2tempfix | CuraEngine Legacy (1.1.2) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_curalegacy | Dashboard (1.19.6) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_dashboard | Discovery (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/discovery | !DisplayLayerProgress Plugin (1.27.2) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_DisplayLayerProgress | Error Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/errortracking | Event Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/eventmanager | File Check (2021.2.23) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_file_check | Firmware Check (2021.10.11) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmware_check | Firmware Updater (1.13.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmwareupdater | GCode Viewer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/gcodeviewer | Logging (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/logging | !Octolapse (0.4.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_octolapse | Pi Support Plugin (2021.10.28) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/pluginmanager | PrintTimeGenius Plugin (2.2.8) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_PrintTimeGenius | Slicer Estimator (1.2.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_SlicerEstimator | Software Update (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/softwareupdate | TouchUI (0.3.18) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_touchui | Virtual Printer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2022-01-18 14:02:23,002 - octoprint.environment - INFO - Detected environment is Python 3.9.2 under Linux (linux). Details: | hardware: | cores: 4 | freq: 1800.0 | ram: 1909063680 | os: | bits: 32 | id: linux | platform: linux | plugins: | pi_support: | model: Raspberry Pi 4 Model B Rev 1.5 | octopi_version: 1.0.0 | throttle_state: '0x0' | python: | pip: 21.3.1 | version: 3.9.2 | virtualenv: /home/pi/oprint 2022-01-18 14:02:23,015 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/webassets... 2022-01-18 14:02:23,038 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-cache... 2022-01-18 14:02:23,479 - octoprint.plugins.firmwareupdater - INFO - Setting maximum upload size for /flash to 5243904 2022-01-18 14:02:23,479 - octoprint.server - INFO - Shutting down intermediary server... 2022-01-18 14:02:23,851 - octoprint.server - INFO - Intermediary server shut down 2022-01-18 14:02:23,852 - octoprint.events - INFO - Processing startup event, this is our first event 2022-01-18 14:02:23,853 - octoprint.events - INFO - Adding 2 events to queue that were held back before startup event 2022-01-18 14:02:23,862 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue... 2022-01-18 14:02:23,868 - octoprint.server - INFO - Autoconnect on startup is configured, trying to connect to the printer... 2022-01-18 14:02:23,887 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue 2022-01-18 14:02:23,893 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json 2022-01-18 14:02:23,913 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2022-01-18 14:02:24,036 - octoprint.server - INFO - Trying to connect to configured serial port None 2022-01-18 14:02:24,161 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2022-01-18 14:02:24,211 - octoprint.plugins.tracking - INFO - Sent tracking event system_unthrottled, payload: {'throttled_now': False, 'throttled_past': False, 'throttled_mask': 0, 'throttled_voltage_now': False, 'throttled_voltage_past': False, 'throttled_overheat_now': False, 'throttled_overheat_past': False} 2022-01-18 14:02:24,290 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder... 2022-01-18 14:02:24,373 - octoprint.server.util.watchdog - INFO - ... initial scan done. 2022-01-18 14:02:24,589 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 7 port/baudrate candidates: /dev/ttyUSB0@115200, /dev/ttyUSB0@250000, /dev/ttyUSB0@230400, /dev/ttyUSB0@57600, /dev/ttyUSB0@38400, /dev/ttyUSB0@19200, /dev/ttyUSB0@9600 2022-01-18 14:02:24,589 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200 2022-01-18 14:02:24,589 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200 2022-01-18 14:02:24,666 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-18 14:02:24,683 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 14:02:24,728 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Operational" 2022-01-18 14:02:24,736 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 14:02:24,759 - octoprint.plugins.firmwareupdater - INFO - Got CONNECTED event 2022-01-18 14:02:24,784 - octoprint.plugins.firmwareupdater - INFO - Run postflash flag is not set 2022-01-18 14:02:24,840 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin CR-6 community firmware - release 6.1 (based on Marlin 2.0.8.1) (Jun 4 2021 16:53:51)" 2022-01-18 14:02:24,848 - octoprint.plugins.firmwareupdater - INFO - Setting BINARY_FILE_TRANSFER capability to False 2022-01-18 14:02:24,907 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting 2022-01-18 14:02:24,916 - octoprint.util.comm - INFO - Firmware states that it supports emergency GCODEs to be sent without waiting for an acknowledgement first 2022-01-18 14:02:25,080 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {'firmware_name': 'Marlin CR-6 community firmware - release 6.1 (based on Marlin 2.0.8.1) (Jun 4 2021 16:53:51)', 'printer_port': None, 'printer_baudrate': 0} 2022-01-18 14:02:25,112 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2022-01-18 14:02:25,289 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on raspberrypi._http._tcp.local.' for _http._tcp.local. 2022-01-18 14:02:26,109 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on raspberrypi._octoprint._tcp.local.' for _octoprint._tcp.local. 2022-01-18 14:02:26,139 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance on raspberrypi for SSDP 2022-01-18 14:02:26,168 - octoprint.plugins.curalegacy - INFO - Path to CuraEngine has not been configured or does not exist (currently set to None), Cura will not be selectable for slicing 2022-01-18 14:02:26,172 - octoprint.server - INFO - Listening on http://127.0.0.1:5000 2022-01-18 14:02:26,251 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2022-01-18 14:02:27,086 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2022-01-18 14:02:27,093 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-01-18 14:02:27,108 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-01-18 14:02:27,147 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 11.7GB. That is considered sufficient for updating. 2022-01-18 14:02:27,224 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2022-01-18 14:02:27,290 - octoprint.plugins.SlicerEstimator - INFO - Started up SlicerEstimator 2022-01-18 14:02:27,292 - octoprint.plugins.bedlevelvisualizer - INFO - OctoPrint-BedLevelVisualizer loaded! 2022-01-18 14:02:27,292 - octoprint.plugins.dashboard - INFO - Dashboard started 2022-01-18 14:02:27,296 - octoprint.JsFrontendErrors(Dash) - INFO - Js Logger (Dash) started 2022-01-18 14:02:27,463 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'http://192.168.1.76/', 'path': '/', 'query_string': 'l10n=en'} 2022-01-18 14:02:27,507 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 6, 'printer_state': 'OPERATIONAL'} 2022-01-18 14:02:27,818 - octoprint.plugins.tracking - INFO - Sent tracking event pong, payload: {'version': '1.7.2', 'os': 'linux', 'bits': 32, 'python': '3.9.2', 'pip': '21.3.1', 'cores': 4, 'freq': 1800.0, 'ram': 1909063680, 'pi_model': 'Raspberry Pi 4 Model B Rev 1.5', 'octopi_version': '1.0.0', 'plugins': 'touchui:0.3.18,thespaghettidetective:1.8.9,slicerestimator:1.2.0,printtimegenius:2.2.8,firmwareupdater:1.13.0,dashboard:1.19.6,curalegacy:1.1.2,crealitytemperature:1.2.4,ender3v2tempfix:0.0.4,bedlevelvisualizer:1.1.1'} 2022-01-18 14:02:27,929 - octoprint.plugins.thespaghettidetective - INFO - Linked printer: {'is_pro': True, 'id': 95565, 'name': 'My Awesome Cloud Printer'} 2022-01-18 14:02:27,963 - octoprint.plugins.thespaghettidetective - INFO - Starting webcam streamer 2022-01-18 14:02:28,091 - octoprint.plugins.tracking - INFO - Sent tracking event startup, payload: {'version': '1.7.2', 'os': 'linux', 'bits': 32, 'python': '3.9.2', 'pip': '21.3.1', 'cores': 4, 'freq': 1800.0, 'ram': 1909063680, 'pi_model': 'Raspberry Pi 4 Model B Rev 1.5', 'octopi_version': '1.0.0'} 2022-01-18 14:02:29,779 - octoprint.plugins.thespaghettidetective - WARNING - No camera detected. Skipping webcam streaming 2022-01-18 14:02:34,643 - octoprint.server.preemptive_cache - INFO - ... done in 7.18s 2022-01-18 14:02:34,725 - octoprint.server.views - INFO - Found path / in cache (key: ui:_default:http://192.168.1.76/:en), signaling as cached 2022-01-18 14:02:34,750 - octoprint.server.views - INFO - Found path / in cache (key: ui:_default:http://192.168.1.76/:en), signaling as cached 2022-01-18 14:02:34,759 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 14:02:34,760 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 14:02:35,534 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.71 2022-01-18 14:02:35,573 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 14:02:35,574 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 14:02:37,725 - octoprint.server.util.sockjs - INFO - User pi logged in on the socket from client ::ffff:192.168.1.71 2022-01-18 14:02:38,424 - octoprint.plugins.tracking - INFO - Sent tracking event webui_load, payload: {'browser_name': 'Chrome', 'browser_version': '97.0.4692.71', 'os_name': 'Windows', 'os_version': '10'} 2022-01-18 14:04:01,527 - octoprint.plugins.thespaghettidetective - WARNING - Server WS ERROR: Connection is already closed. 2022-01-18 14:04:01,528 - octoprint.plugins.thespaghettidetective - WARNING - WS Closed 2022-01-18 14:04:07,487 - octoprint.plugins.dashboard - INFO - GcodePreProcessor started processing. 2022-01-18 14:04:12,647 - octoprint.filemanager.analysis - INFO - Starting analysis of local:CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode 2022-01-18 14:04:12,648 - octoprint.filemanager.analysis - INFO - Invoking analysis command: /home/pi/oprint/bin/python -m octoprint analysis gcode --speed-x=6000 --speed-y=6000 --max-t=10 --throttle=0.0 --throttle-lines=100 --bed-z=0.0 /home/pi/.octoprint/uploads/CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode 2022-01-18 14:04:12,703 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 14:04:12,734 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Sending file to SD" 2022-01-18 14:04:12,740 - octoprint.filemanager.analysis - INFO - Probably starting printing, aborting analysis of file-upload. 2022-01-18 14:04:12,742 - octoprint.plugins.action_command_notification - INFO - Got a notification: ccr6se~1.gco 2022-01-18 14:04:12,752 - octoprint.plugins.thespaghettidetective - ERROR - 'NoneType' object has no attribute 'get_metadata' Traceback (most recent call last): File "/home/pi/oprint/lib/python3.9/site-packages/octoprint_thespaghettidetective/print_event.py", line 80, in get_file_metadata file_metadata = plugin._file_manager._storage_managers.get(origin).get_metadata(path) AttributeError: 'NoneType' object has no attribute 'get_metadata' 2022-01-18 14:04:12,939 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 29, current line = 30 | Last lines in terminal: | Recv: ok | Send: N21 G1 X10.4 Y200.0 Z0.28 F5000.0*62 | Recv: ok | Send: N22 G1 X10.4 Y20 Z0.28 F1500.0 E30*116 | Recv: ok | Send: N23 G92 E0*118 | Recv: ok | Send: N24 G1 Z2.0 F3000*45 | Recv: ok | Send: N25 G92 E0*112 | Recv: ok | Send: N26 G92 E0*115 | Recv: ok | Send: N27 G1 F3000 E-6.5*29 | Recv: ok | Send: N28 M117 DASHBOARD_LAYER_INDICATOR 1*105 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 2022-01-18 14:04:12,966 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 29, current line = 30 | Last lines in terminal: | Recv: ok | Send: N23 G92 E0*118 | Recv: ok | Send: N24 G1 Z2.0 F3000*45 | Recv: ok | Send: N25 G92 E0*112 | Recv: ok | Send: N26 G92 E0*115 | Recv: ok | Send: N27 G1 F3000 E-6.5*29 | Recv: ok | Send: N28 M117 DASHBOARD_LAYER_INDICATOR 1*105 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 2022-01-18 14:04:12,995 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 29, current line = 30 | Last lines in terminal: | Send: N25 G92 E0*112 | Recv: ok | Send: N26 G92 E0*115 | Recv: ok | Send: N27 G1 F3000 E-6.5*29 | Recv: ok | Send: N28 M117 DASHBOARD_LAYER_INDICATOR 1*105 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: T:24.10 /0.00 B:37.21 /0.00 @:0 B@:0 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 2022-01-18 14:04:13,022 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 29, current line = 30 | Last lines in terminal: | Send: N27 G1 F3000 E-6.5*29 | Recv: ok | Send: N28 M117 DASHBOARD_LAYER_INDICATOR 1*105 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: T:24.10 /0.00 B:37.21 /0.00 @:0 B@:0 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 2022-01-18 14:04:13,049 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 29, current line = 30 | Last lines in terminal: | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: T:24.10 /0.00 B:37.21 /0.00 @:0 B@:0 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 2022-01-18 14:04:13,206 - octoprint.util.comm - WARNING - Printer keeps requesting line 29 again and again, communication stuck 2022-01-18 14:04:13,206 - octoprint.util.comm - INFO - Changing monitoring state from "Sending file to SD" to "Error" 2022-01-18 14:04:13,208 - octoprint.util.comm - INFO - Force-sending M112 to the printer 2022-01-18 14:04:13,212 - octoprint.filemanager.analysis - INFO - Starting analysis of local:CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode 2022-01-18 14:04:13,227 - octoprint.filemanager.analysis - INFO - Invoking analysis command: /home/pi/oprint/bin/python -m octoprint analysis gcode --speed-x=6000 --speed-y=6000 --max-t=10 --throttle=0.0 --throttle-lines=100 --bed-z=0.0 /home/pi/.octoprint/uploads/CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode 2022-01-18 14:04:13,244 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2022-01-18 14:04:13,393 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2022-01-18 14:04:13,456 - octoprint.plugins.tracking - INFO - Sent tracking event print_failed, payload: {'origin': 'sdcard', 'file': '5c8a3b83d34f6524a9d407f264a4c958a6ce859f', 'reason': 'error', 'commerror_text': 'Printer keeps requesting line 29 again and again, communication stuck'} 2022-01-18 14:04:13,680 - octoprint.plugins.tracking - INFO - Sent tracking event commerror_resend_loop, payload: {'commerror_text': 'Printer keeps requesting line 29 again and again, communication stuck'} 2022-01-18 14:04:13,764 - octoprint.util.comm - INFO - Firmware didn't send an 'ok' with their resend request. That's a known bug with some firmware variants out there. Simulating an ok to continue... 2022-01-18 14:04:26,843 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Opening serial connection" 2022-01-18 14:04:26,857 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200 2022-01-18 14:04:26,880 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial connection" to "Connecting" 2022-01-18 14:04:26,884 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 14:04:26,915 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 14:04:26,916 - octoprint.util.comm - INFO - Changing monitoring state from "Connecting" to "Operational" 2022-01-18 14:04:26,939 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 14:04:26,941 - octoprint.plugins.firmwareupdater - INFO - Got CONNECTED event 2022-01-18 14:04:26,942 - octoprint.plugins.firmwareupdater - INFO - Run postflash flag is not set 2022-01-18 14:04:32,522 - octoprint.plugins.SlicerEstimator - INFO - Detected Cura 2022-01-18 14:04:33,522 - octoprint.filemanager.analysis - INFO - Found 40087.0s from slicer for file CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode 2022-01-18 14:04:33,522 - octoprint.filemanager.analysis - INFO - Analysis of entry local:CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode finished, needed 20.31s 2022-01-18 14:04:33,533 - octoprint.plugins.dashboard - INFO - GcodePreProcessor found layers: 219 2022-01-18 14:04:33,534 - octoprint.plugins.dashboard - INFO - GcodePreProcessor found filament changes: 0 2022-01-18 14:04:33,534 - octoprint.plugins.dashboard - INFO - GcodePreProcessor saving layer count in file metadata 2022-01-18 14:05:09,473 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.71 2022-01-18 14:05:13,567 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 14:05:13,568 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 14:05:14,181 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.71 2022-01-18 14:05:14,200 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 14:05:14,201 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 14:05:16,305 - octoprint.server.util.sockjs - INFO - User pi logged in on the socket from client ::ffff:192.168.1.71 2022-01-18 14:05:17,002 - octoprint.plugins.tracking - INFO - Sent tracking event webui_load, payload: {'browser_name': 'Chrome', 'browser_version': '97.0.4692.71', 'os_name': 'Windows', 'os_version': '10'} 2022-01-18 14:05:32,444 - octoprint.plugins.action_command_notification - INFO - Got a notification: Media Removed 2022-01-18 14:05:33,871 - octoprint.plugins.action_command_notification - INFO - Got a notification: Media Inserted 2022-01-18 14:06:17,368 - octoprint.plugins.dashboard - INFO - GcodePreProcessor started processing. 2022-01-18 14:06:22,463 - octoprint.filemanager.analysis - INFO - Starting analysis of local:CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode 2022-01-18 14:06:22,463 - octoprint.filemanager.analysis - INFO - Invoking analysis command: /home/pi/oprint/bin/python -m octoprint analysis gcode --speed-x=6000 --speed-y=6000 --max-t=10 --throttle=0.0 --throttle-lines=100 --bed-z=0.0 /home/pi/.octoprint/uploads/CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode 2022-01-18 14:06:32,465 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 14:06:40,500 - octoprint.plugins.thespaghettidetective - ERROR - 'NoneType' object has no attribute 'get_metadata' Traceback (most recent call last): File "/home/pi/oprint/lib/python3.9/site-packages/octoprint_thespaghettidetective/print_event.py", line 80, in get_file_metadata file_metadata = plugin._file_manager._storage_managers.get(origin).get_metadata(path) AttributeError: 'NoneType' object has no attribute 'get_metadata' 2022-01-18 14:06:41,555 - octoprint.plugins.SlicerEstimator - INFO - Detected Cura 2022-01-18 14:06:42,556 - octoprint.filemanager.analysis - INFO - Found 40087.0s from slicer for file CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode 2022-01-18 14:06:42,557 - octoprint.filemanager.analysis - INFO - Analysis of entry local:CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode finished, needed 20.09s 2022-01-18 14:06:42,573 - octoprint.plugins.dashboard - INFO - GcodePreProcessor found layers: 219 2022-01-18 14:06:42,574 - octoprint.plugins.dashboard - INFO - GcodePreProcessor found filament changes: 0 2022-01-18 14:06:42,574 - octoprint.plugins.dashboard - INFO - GcodePreProcessor saving layer count in file metadata 2022-01-18 14:06:50,512 - octoprint.plugins.thespaghettidetective - ERROR - 'NoneType' object has no attribute 'get_metadata' Traceback (most recent call last): File "/home/pi/oprint/lib/python3.9/site-packages/octoprint_thespaghettidetective/print_event.py", line 80, in get_file_metadata file_metadata = plugin._file_manager._storage_managers.get(origin).get_metadata(path) AttributeError: 'NoneType' object has no attribute 'get_metadata' 2022-01-18 14:05:04,622 - octoprint.startup - INFO - ****************************************************************************** 2022-01-18 14:05:04,624 - octoprint.startup - INFO - Starting OctoPrint 1.7.2 2022-01-18 14:05:04,625 - octoprint.startup - INFO - ****************************************************************************** 2022-01-18 14:05:10,968 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: offline 2022-01-18 14:05:10,968 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 8.8.8.8:53 is not working 2022-01-18 14:05:10,969 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is not working 2022-01-18 14:05:10,977 - octoprint.startup - INFO - We don't appear to be online, not fetching plugin blacklist 2022-01-18 14:05:11,076 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2022-01-18 14:05:12,665 - octoprint.plugin.core - INFO - Plugin Octolapse (0.4.1) is disabled. 2022-01-18 14:05:12,713 - octoprint.plugin.core - INFO - Plugin DisplayLayerProgress Plugin (1.27.2) is disabled. 2022-01-18 14:05:12,825 - octoprint.startup - INFO - Added settings overlay from plugin dashboard 2022-01-18 14:05:12,833 - octoprint.plugin.core - INFO - Found 30 plugin(s) providing 28 mixin implementations, 71 hook handlers 2022-01-18 14:05:12,894 - octoprint.server.heartbeat - INFO - Starting server heartbeat, 900.0s interval 2022-01-18 14:05:12,933 - octoprint.server - INFO - Intermediary server started 2022-01-18 14:05:12,946 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/pi/.octoprint/uploads... 2022-01-18 14:05:12,970 - octoprint.filemanager.storage - INFO - ... file metadata for /home/pi/.octoprint/uploads initialized successfully. 2022-01-18 14:05:12,973 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_SHOW (needs: "Need(method='role', value='plugin_action_command_notification_show')") 2022-01-18 14:05:12,973 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_CLEAR (needs: "Need(method='role', value='plugin_action_command_notification_clear')") 2022-01-18 14:05:12,974 - octoprint.server - INFO - Added new permission from plugin action_command_prompt: PLUGIN_ACTION_COMMAND_PROMPT_INTERACT (needs: "Need(method='role', value='plugin_action_command_prompt_interact')") 2022-01-18 14:05:12,974 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_READ (needs: "Need(method='role', value='plugin_announcements_read')") 2022-01-18 14:05:12,974 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_MANAGE (needs: "Need(method='role', value='plugin_announcements_read'), Need(method='role', value='plugin_announcements_manage')") 2022-01-18 14:05:12,975 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_ADMIN (needs: "Need(method='role', value='plugin_appkeys_admin')") 2022-01-18 14:05:12,975 - octoprint.server - INFO - Added new permission from plugin backup: PLUGIN_BACKUP_ACCESS (needs: "Need(method='role', value='plugin_backup_access')") 2022-01-18 14:05:12,975 - octoprint.server - INFO - Added new permission from plugin dashboard: PLUGIN_DASHBOARD_ADMIN (needs: "Need(method='role', value='plugin_dashboard_admin')") 2022-01-18 14:05:12,975 - octoprint.server - INFO - Added new permission from plugin firmware_check: PLUGIN_FIRMWARE_CHECK_DISPLAY (needs: "Need(method='role', value='plugin_firmware_check_display')") 2022-01-18 14:05:12,975 - octoprint.server - INFO - Added new permission from plugin logging: PLUGIN_LOGGING_MANAGE (needs: "Need(method='role', value='plugin_logging_manage')") 2022-01-18 14:05:12,976 - octoprint.server - INFO - Added new permission from plugin pi_support: PLUGIN_PI_SUPPORT_STATUS (needs: "Need(method='role', value='plugin_pi_support_check')") 2022-01-18 14:05:12,976 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_MANAGE (needs: "Need(method='role', value='plugin_pluginmanager_manage')") 2022-01-18 14:05:12,976 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_INSTALL (needs: "Need(method='role', value='plugin_pluginmanager_manage'), Need(method='role', value='plugin_pluginmanager_install')") 2022-01-18 14:05:12,976 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CHECK (needs: "Need(method='role', value='plugin_softwareupdate_check')") 2022-01-18 14:05:12,977 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_UPDATE (needs: "Need(method='role', value='plugin_softwareupdate_update')") 2022-01-18 14:05:12,977 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CONFIGURE (needs: "Need(method='role', value='plugin_softwareupdate_configure')") 2022-01-18 14:05:12,990 - octoprint.printer.standard - INFO - Using print time estimator provided by PrintTimeGenius 2022-01-18 14:05:12,990 - octoprint.printer.standard - INFO - Using print time estimator provided by SlicerEstimator 2022-01-18 14:05:13,928 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2022-01-18 14:05:14,706 - octoprint.util.pip - INFO - Version of pip is 21.3.1 2022-01-18 14:05:14,707 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-01-18 14:05:14,708 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-01-18 14:05:14,812 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk 2022-01-18 14:05:14,902 - octoprint.plugins.firmwareupdater - INFO - Python binproto2 package installed: False 2022-01-18 14:05:14,935 - octoprint.plugin.core - INFO - Initialized 28 plugin implementation(s) 2022-01-18 14:05:14,945 - octoprint.plugin.core - INFO - 30 plugin(s) registered with the system: | Access Anywhere - The Spaghetti Detective (1.8.9) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_thespaghettidetective | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/appkeys | Backup & Restore (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/backup | Bed Visualizer (1.1.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_bedlevelvisualizer | Core Wizard (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/corewizard | Creality Temperature (1.2.4) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_CrealityTemperature | Creality-2x-temperature-reporting-fix (0.0.4) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_ender3v2tempfix | CuraEngine Legacy (1.1.2) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_curalegacy | Dashboard (1.19.6) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_dashboard | Discovery (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/discovery | !DisplayLayerProgress Plugin (1.27.2) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_DisplayLayerProgress | Error Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/errortracking | Event Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/eventmanager | File Check (2021.2.23) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_file_check | Firmware Check (2021.10.11) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmware_check | Firmware Updater (1.13.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmwareupdater | GCode Viewer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/gcodeviewer | Logging (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/logging | !Octolapse (0.4.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_octolapse | Pi Support Plugin (2021.10.28) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/pluginmanager | PrintTimeGenius Plugin (2.2.8) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_PrintTimeGenius | Slicer Estimator (1.2.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_SlicerEstimator | Software Update (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/softwareupdate | TouchUI (0.3.18) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_touchui | Virtual Printer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2022-01-18 14:05:14,969 - octoprint.environment - INFO - Detected environment is Python 3.9.2 under Linux (linux). Details: | hardware: | cores: 4 | freq: 1800.0 | ram: 1909063680 | os: | bits: 32 | id: linux | platform: linux | plugins: | pi_support: | model: Raspberry Pi 4 Model B Rev 1.5 | octopi_version: 1.0.0 | throttle_state: '0x0' | python: | pip: 21.3.1 | version: 3.9.2 | virtualenv: /home/pi/oprint 2022-01-18 14:05:14,977 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/webassets... 2022-01-18 14:05:15,003 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-cache... 2022-01-18 14:05:15,499 - octoprint.plugins.firmwareupdater - INFO - Setting maximum upload size for /flash to 5243904 2022-01-18 14:05:15,500 - octoprint.server - INFO - Shutting down intermediary server... 2022-01-18 14:05:15,950 - octoprint.server - INFO - Intermediary server shut down 2022-01-18 14:05:15,951 - octoprint.events - INFO - Processing startup event, this is our first event 2022-01-18 14:05:15,952 - octoprint.events - INFO - Adding 1 events to queue that were held back before startup event 2022-01-18 14:05:15,952 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue... 2022-01-18 14:05:15,956 - octoprint.server - INFO - Autoconnect on startup is configured, trying to connect to the printer... 2022-01-18 14:05:15,957 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue 2022-01-18 14:05:15,978 - octoprint.server - INFO - Trying to connect to configured serial port None 2022-01-18 14:05:16,001 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2022-01-18 14:05:16,005 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder... 2022-01-18 14:05:16,031 - octoprint.server.util.watchdog - INFO - ... initial scan done. 2022-01-18 14:05:16,036 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 7 port/baudrate candidates: /dev/ttyUSB0@115200, /dev/ttyUSB0@250000, /dev/ttyUSB0@230400, /dev/ttyUSB0@57600, /dev/ttyUSB0@38400, /dev/ttyUSB0@19200, /dev/ttyUSB0@9600 2022-01-18 14:05:16,037 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200 2022-01-18 14:05:16,037 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200 2022-01-18 14:05:16,057 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-18 14:05:16,059 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 14:05:16,066 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Operational" 2022-01-18 14:05:16,069 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 14:05:16,084 - octoprint.plugins.firmwareupdater - INFO - Got CONNECTED event 2022-01-18 14:05:16,085 - octoprint.plugins.firmwareupdater - INFO - Run postflash flag is not set 2022-01-18 14:05:16,115 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin CR-6 community firmware - release 6.1 (based on Marlin 2.0.8.1) (Jun 4 2021 16:53:51)" 2022-01-18 14:05:16,120 - octoprint.plugins.firmwareupdater - INFO - Setting BINARY_FILE_TRANSFER capability to False 2022-01-18 14:05:16,157 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting 2022-01-18 14:05:16,177 - octoprint.util.comm - INFO - Firmware states that it supports emergency GCODEs to be sent without waiting for an acknowledgement first 2022-01-18 14:05:16,849 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on raspberrypi._http._tcp.local.' for _http._tcp.local. 2022-01-18 14:05:17,664 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on raspberrypi._octoprint._tcp.local.' for _octoprint._tcp.local. 2022-01-18 14:05:17,721 - octoprint.plugins.curalegacy - INFO - Path to CuraEngine has not been configured or does not exist (currently set to None), Cura will not be selectable for slicing 2022-01-18 14:05:17,725 - octoprint.server - INFO - Listening on http://127.0.0.1:5000 2022-01-18 14:05:17,812 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2022-01-18 14:05:18,630 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2022-01-18 14:05:18,641 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-01-18 14:05:18,651 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-01-18 14:05:18,685 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 11.7GB. That is considered sufficient for updating. 2022-01-18 14:05:18,686 - octoprint.plugins.softwareupdate - INFO - Not fetching check overlays, we are offline 2022-01-18 14:05:18,821 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2022-01-18 14:05:22,495 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2022-01-18 14:05:22,497 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-01-18 14:05:22,497 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-01-18 14:05:22,555 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk 2022-01-18 14:05:22,559 - octoprint.plugins.SlicerEstimator - INFO - Started up SlicerEstimator 2022-01-18 14:05:22,561 - octoprint.plugins.bedlevelvisualizer - INFO - OctoPrint-BedLevelVisualizer loaded! 2022-01-18 14:05:22,561 - octoprint.plugins.dashboard - INFO - Dashboard started 2022-01-18 14:05:22,564 - octoprint.JsFrontendErrors(Dash) - INFO - Js Logger (Dash) started 2022-01-18 14:05:22,654 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'http://192.168.1.76/', 'path': '/', 'query_string': 'l10n=en'} 2022-01-18 14:05:22,726 - octoprint.plugins.thespaghettidetective - ERROR - GET: https://app.thespaghettidetective.com/api/v1/octo/printer/ Traceback (most recent call last): File "/home/pi/oprint/lib/python3.9/site-packages/urllib3/connection.py", line 174, in _new_conn conn = connection.create_connection( File "/home/pi/oprint/lib/python3.9/site-packages/urllib3/util/connection.py", line 72, in create_connection for res in socket.getaddrinfo(host, port, family, socket.SOCK_STREAM): File "/usr/lib/python3.9/socket.py", line 953, in getaddrinfo for res in _socket.getaddrinfo(host, port, family, type, proto, flags): socket.gaierror: [Errno -3] Temporary failure in name resolution During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/pi/oprint/lib/python3.9/site-packages/urllib3/connectionpool.py", line 703, in urlopen httplib_response = self._make_request( File "/home/pi/oprint/lib/python3.9/site-packages/urllib3/connectionpool.py", line 386, in _make_request self._validate_conn(conn) File "/home/pi/oprint/lib/python3.9/site-packages/urllib3/connectionpool.py", line 1040, in _validate_conn conn.connect() File "/home/pi/oprint/lib/python3.9/site-packages/urllib3/connection.py", line 358, in connect conn = self._new_conn() File "/home/pi/oprint/lib/python3.9/site-packages/urllib3/connection.py", line 186, in _new_conn raise NewConnectionError( urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno -3] Temporary failure in name resolution During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/pi/oprint/lib/python3.9/site-packages/requests/adapters.py", line 440, in send resp = conn.urlopen( File "/home/pi/oprint/lib/python3.9/site-packages/urllib3/connectionpool.py", line 785, in urlopen retries = retries.increment( File "/home/pi/oprint/lib/python3.9/site-packages/urllib3/util/retry.py", line 592, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='app.thespaghettidetective.com', port=443): Max retries exceeded with url: /api/v1/octo/printer/ (Caused by NewConnectionError(': Failed to establish a new connection: [Errno -3] Temporary failure in name resolution')) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/pi/oprint/lib/python3.9/site-packages/octoprint_thespaghettidetective/utils.py", line 272, in server_request resp = requests.request(method, endpoint, timeout=timeout, **kwargs) File "/home/pi/oprint/lib/python3.9/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/pi/oprint/lib/python3.9/site-packages/requests/sessions.py", line 529, in request resp = self.send(prep, **send_kwargs) File "/home/pi/oprint/lib/python3.9/site-packages/raven/breadcrumbs.py", line 341, in send resp = real_send(self, request, *args, **kwargs) File "/home/pi/oprint/lib/python3.9/site-packages/requests/sessions.py", line 645, in send r = adapter.send(request, **kwargs) File "/home/pi/oprint/lib/python3.9/site-packages/requests/adapters.py", line 519, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='app.thespaghettidetective.com', port=443): Max retries exceeded with url: /api/v1/octo/printer/ (Caused by NewConnectionError(': Failed to establish a new connection: [Errno -3] Temporary failure in name resolution')) 2022-01-18 14:05:22,727 - backoff - INFO - Backing off wait_for_auth_token(...) for 0.3s (None) 2022-01-18 14:05:23,041 - octoprint.plugins.thespaghettidetective - ERROR - GET: https://app.thespaghettidetective.com/api/v1/octo/printer/ Traceback (most recent call last): File "/home/pi/oprint/lib/python3.9/site-packages/urllib3/connection.py", line 174, in _new_conn conn = connection.create_connection( File "/home/pi/oprint/lib/python3.9/site-packages/urllib3/util/connection.py", line 72, in create_connection for res in socket.getaddrinfo(host, port, family, socket.SOCK_STREAM): File "/usr/lib/python3.9/socket.py", line 953, in getaddrinfo for res in _socket.getaddrinfo(host, port, family, type, proto, flags): socket.gaierror: [Errno -3] Temporary failure in name resolution During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/pi/oprint/lib/python3.9/site-packages/urllib3/connectionpool.py", line 703, in urlopen httplib_response = self._make_request( File "/home/pi/oprint/lib/python3.9/site-packages/urllib3/connectionpool.py", line 386, in _make_request self._validate_conn(conn) File "/home/pi/oprint/lib/python3.9/site-packages/urllib3/connectionpool.py", line 1040, in _validate_conn conn.connect() File "/home/pi/oprint/lib/python3.9/site-packages/urllib3/connection.py", line 358, in connect conn = self._new_conn() File "/home/pi/oprint/lib/python3.9/site-packages/urllib3/connection.py", line 186, in _new_conn raise NewConnectionError( urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno -3] Temporary failure in name resolution During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/pi/oprint/lib/python3.9/site-packages/requests/adapters.py", line 440, in send resp = conn.urlopen( File "/home/pi/oprint/lib/python3.9/site-packages/urllib3/connectionpool.py", line 785, in urlopen retries = retries.increment( File "/home/pi/oprint/lib/python3.9/site-packages/urllib3/util/retry.py", line 592, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='app.thespaghettidetective.com', port=443): Max retries exceeded with url: /api/v1/octo/printer/ (Caused by NewConnectionError(': Failed to establish a new connection: [Errno -3] Temporary failure in name resolution')) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/pi/oprint/lib/python3.9/site-packages/octoprint_thespaghettidetective/utils.py", line 272, in server_request resp = requests.request(method, endpoint, timeout=timeout, **kwargs) File "/home/pi/oprint/lib/python3.9/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/pi/oprint/lib/python3.9/site-packages/requests/sessions.py", line 529, in request resp = self.send(prep, **send_kwargs) File "/home/pi/oprint/lib/python3.9/site-packages/raven/breadcrumbs.py", line 341, in send resp = real_send(self, request, *args, **kwargs) File "/home/pi/oprint/lib/python3.9/site-packages/requests/sessions.py", line 645, in send r = adapter.send(request, **kwargs) File "/home/pi/oprint/lib/python3.9/site-packages/requests/adapters.py", line 519, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='app.thespaghettidetective.com', port=443): Max retries exceeded with url: /api/v1/octo/printer/ (Caused by NewConnectionError(': Failed to establish a new connection: [Errno -3] Temporary failure in name resolution')) 2022-01-18 14:05:23,042 - backoff - INFO - Backing off wait_for_auth_token(...) for 1.0s (None) 2022-01-18 14:05:24,102 - octoprint.plugins.thespaghettidetective - ERROR - GET: https://app.thespaghettidetective.com/api/v1/octo/printer/ Traceback (most recent call last): File "/home/pi/oprint/lib/python3.9/site-packages/urllib3/connection.py", line 174, in _new_conn conn = connection.create_connection( File "/home/pi/oprint/lib/python3.9/site-packages/urllib3/util/connection.py", line 72, in create_connection for res in socket.getaddrinfo(host, port, family, socket.SOCK_STREAM): File "/usr/lib/python3.9/socket.py", line 953, in getaddrinfo for res in _socket.getaddrinfo(host, port, family, type, proto, flags): socket.gaierror: [Errno -3] Temporary failure in name resolution During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/pi/oprint/lib/python3.9/site-packages/urllib3/connectionpool.py", line 703, in urlopen httplib_response = self._make_request( File "/home/pi/oprint/lib/python3.9/site-packages/urllib3/connectionpool.py", line 386, in _make_request self._validate_conn(conn) File "/home/pi/oprint/lib/python3.9/site-packages/urllib3/connectionpool.py", line 1040, in _validate_conn conn.connect() File "/home/pi/oprint/lib/python3.9/site-packages/urllib3/connection.py", line 358, in connect conn = self._new_conn() File "/home/pi/oprint/lib/python3.9/site-packages/urllib3/connection.py", line 186, in _new_conn raise NewConnectionError( urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno -3] Temporary failure in name resolution During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/pi/oprint/lib/python3.9/site-packages/requests/adapters.py", line 440, in send resp = conn.urlopen( File "/home/pi/oprint/lib/python3.9/site-packages/urllib3/connectionpool.py", line 785, in urlopen retries = retries.increment( File "/home/pi/oprint/lib/python3.9/site-packages/urllib3/util/retry.py", line 592, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='app.thespaghettidetective.com', port=443): Max retries exceeded with url: /api/v1/octo/printer/ (Caused by NewConnectionError(': Failed to establish a new connection: [Errno -3] Temporary failure in name resolution')) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/pi/oprint/lib/python3.9/site-packages/octoprint_thespaghettidetective/utils.py", line 272, in server_request resp = requests.request(method, endpoint, timeout=timeout, **kwargs) File "/home/pi/oprint/lib/python3.9/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/pi/oprint/lib/python3.9/site-packages/requests/sessions.py", line 529, in request resp = self.send(prep, **send_kwargs) File "/home/pi/oprint/lib/python3.9/site-packages/raven/breadcrumbs.py", line 341, in send resp = real_send(self, request, *args, **kwargs) File "/home/pi/oprint/lib/python3.9/site-packages/requests/sessions.py", line 645, in send r = adapter.send(request, **kwargs) File "/home/pi/oprint/lib/python3.9/site-packages/requests/adapters.py", line 519, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='app.thespaghettidetective.com', port=443): Max retries exceeded with url: /api/v1/octo/printer/ (Caused by NewConnectionError(': Failed to establish a new connection: [Errno -3] Temporary failure in name resolution')) 2022-01-18 14:05:24,102 - backoff - INFO - Backing off wait_for_auth_token(...) for 0.8s (None) 2022-01-18 14:05:30,187 - octoprint.server.preemptive_cache - INFO - ... done in 7.53s 2022-01-18 14:05:46,707 - octoprint.plugins.thespaghettidetective - ERROR - GET: https://app.thespaghettidetective.com/api/v1/octo/printer/ Traceback (most recent call last): File "/home/pi/oprint/lib/python3.9/site-packages/urllib3/connection.py", line 174, in _new_conn conn = connection.create_connection( File "/home/pi/oprint/lib/python3.9/site-packages/urllib3/util/connection.py", line 72, in create_connection for res in socket.getaddrinfo(host, port, family, socket.SOCK_STREAM): File "/usr/lib/python3.9/socket.py", line 953, in getaddrinfo for res in _socket.getaddrinfo(host, port, family, type, proto, flags): socket.gaierror: [Errno -3] Temporary failure in name resolution During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/pi/oprint/lib/python3.9/site-packages/urllib3/connectionpool.py", line 703, in urlopen httplib_response = self._make_request( File "/home/pi/oprint/lib/python3.9/site-packages/urllib3/connectionpool.py", line 386, in _make_request self._validate_conn(conn) File "/home/pi/oprint/lib/python3.9/site-packages/urllib3/connectionpool.py", line 1040, in _validate_conn conn.connect() File "/home/pi/oprint/lib/python3.9/site-packages/urllib3/connection.py", line 358, in connect conn = self._new_conn() File "/home/pi/oprint/lib/python3.9/site-packages/urllib3/connection.py", line 186, in _new_conn raise NewConnectionError( urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno -3] Temporary failure in name resolution During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/pi/oprint/lib/python3.9/site-packages/requests/adapters.py", line 440, in send resp = conn.urlopen( File "/home/pi/oprint/lib/python3.9/site-packages/urllib3/connectionpool.py", line 785, in urlopen retries = retries.increment( File "/home/pi/oprint/lib/python3.9/site-packages/urllib3/util/retry.py", line 592, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='app.thespaghettidetective.com', port=443): Max retries exceeded with url: /api/v1/octo/printer/ (Caused by NewConnectionError(': Failed to establish a new connection: [Errno -3] Temporary failure in name resolution')) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/pi/oprint/lib/python3.9/site-packages/octoprint_thespaghettidetective/utils.py", line 272, in server_request resp = requests.request(method, endpoint, timeout=timeout, **kwargs) File "/home/pi/oprint/lib/python3.9/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/pi/oprint/lib/python3.9/site-packages/requests/sessions.py", line 529, in request resp = self.send(prep, **send_kwargs) File "/home/pi/oprint/lib/python3.9/site-packages/raven/breadcrumbs.py", line 341, in send resp = real_send(self, request, *args, **kwargs) File "/home/pi/oprint/lib/python3.9/site-packages/requests/sessions.py", line 645, in send r = adapter.send(request, **kwargs) File "/home/pi/oprint/lib/python3.9/site-packages/requests/adapters.py", line 519, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='app.thespaghettidetective.com', port=443): Max retries exceeded with url: /api/v1/octo/printer/ (Caused by NewConnectionError(': Failed to establish a new connection: [Errno -3] Temporary failure in name resolution')) 2022-01-18 14:05:46,708 - backoff - INFO - Backing off wait_for_auth_token(...) for 4.9s (None) 2022-01-18 14:08:23,630 - octoprint.plugins.thespaghettidetective - INFO - Linked printer: {'is_pro': True, 'id': 95565, 'name': 'My Awesome Cloud Printer'} 2022-01-18 14:08:23,638 - octoprint.plugins.thespaghettidetective - INFO - Starting webcam streamer 2022-01-18 14:08:24,763 - backoff - INFO - Backing off wait_for_janus(...) for 0.4s (ConnectionRefusedError: [Errno 111] Connection refused) 2022-01-18 14:08:25,721 - octoprint.plugins.thespaghettidetective - WARNING - No camera detected. Skipping webcam streaming 2022-01-18 14:08:26,198 - backoff - INFO - Backing off wait_for_janus(...) for 0.5s (ConnectionRefusedError: [Errno 111] Connection refused) 2022-01-18 14:08:33,900 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 14:08:33,901 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 14:08:34,693 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.71 2022-01-18 14:08:34,737 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 14:08:34,738 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 14:08:40,742 - octoprint.server.util.sockjs - INFO - User pi logged in on the socket from client ::ffff:192.168.1.71 2022-01-18 14:08:44,993 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity changed from offline to online 2022-01-18 14:08:45,045 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2022-01-18 14:08:46,169 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2022-01-18 14:08:46,545 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk 2022-01-18 14:08:46,753 - octoprint.plugins.tracking - INFO - Sent tracking event webui_load, payload: {'browser_name': 'Chrome', 'browser_version': '97.0.4692.71', 'os_name': 'Windows', 'os_version': '10'} 2022-01-18 14:09:26,335 - octoprint.printer.standard.job - INFO - Print job selected - origin: local, path: CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode, owner: pi, user: pi 2022-01-18 14:18:51,099 - octoprint.plugins.thespaghettidetective - WARNING - Server WS ERROR: Connection is already closed. 2022-01-18 14:18:51,101 - octoprint.plugins.thespaghettidetective - WARNING - WS Closed 2022-01-18 14:19:43,228 - octoprint.util.comm - INFO - Starting job on behalf of user pi 2022-01-18 14:19:43,238 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting" 2022-01-18 14:19:43,247 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode, owner: pi, user: pi 2022-01-18 14:19:43,298 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 14:19:43,336 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Printing" 2022-01-18 14:19:43,351 - octoprint.plugins.SlicerEstimator - INFO - Detected Cura 2022-01-18 14:19:43,368 - octoprint.plugins.action_command_notification - INFO - Got a notification: Time Left 11h08m07s 2022-01-18 14:19:43,409 - octoprint.plugins.action_command_notification - INFO - Got a notification: Bed Heating... 2022-01-18 14:19:43,494 - octoprint.plugins.tracking - INFO - Sent tracking event print_started, payload: {'origin': 'local', 'file': '73da9fe1157f6619f8666e1b02fb2b0562c691db'} 2022-01-18 14:19:44,355 - backoff - INFO - Backing off capture_jpeg(...) for 0.3s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:19:44,707 - backoff - INFO - Backing off capture_jpeg(...) for 1.7s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:19:45,404 - octoprint.util.comm - INFO - Printer seems to support the busy protocol, will adjust timeouts and set busy interval accordingly 2022-01-18 14:19:46,410 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:19:54,440 - backoff - INFO - Backing off capture_jpeg(...) for 0.5s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:19:54,993 - backoff - INFO - Backing off capture_jpeg(...) for 1.1s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:19:56,072 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:19:56,754 - octoprint.plugins.action_command_notification - INFO - Got a notification: Printing... 2022-01-18 14:19:56,761 - octoprint.util.comm - INFO - Telling the printer to set the busy interval to our "communicationBusy" timeout - 1s = 2s 2022-01-18 14:20:05,104 - backoff - INFO - Backing off capture_jpeg(...) for 0.6s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:20:05,736 - backoff - INFO - Backing off capture_jpeg(...) for 0.6s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:20:06,343 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:20:12,895 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2022-01-18 14:20:15,374 - backoff - INFO - Backing off capture_jpeg(...) for 0.7s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:20:16,131 - backoff - INFO - Backing off capture_jpeg(...) for 1.7s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:20:17,836 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:20:22,746 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 758, 'printer_state': 'PRINTING'} 2022-01-18 14:20:25,867 - backoff - INFO - Backing off capture_jpeg(...) for 0.9s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:20:26,813 - backoff - INFO - Backing off capture_jpeg(...) for 2.0s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:20:28,791 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:20:36,820 - backoff - INFO - Backing off capture_jpeg(...) for 0.1s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:20:36,957 - backoff - INFO - Backing off capture_jpeg(...) for 1.0s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:20:37,988 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:20:47,019 - backoff - INFO - Backing off capture_jpeg(...) for 0.3s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:20:47,344 - backoff - INFO - Backing off capture_jpeg(...) for 0.8s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:20:48,106 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:20:52,306 - octoprint.plugins.action_command_notification - INFO - Got a notification: Printing... 2022-01-18 14:20:57,137 - backoff - INFO - Backing off capture_jpeg(...) for 0.4s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:20:57,553 - backoff - INFO - Backing off capture_jpeg(...) for 1.4s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:20:58,937 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:20:59,016 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 14:20:59,016 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 14:20:59,588 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.71 2022-01-18 14:21:00,105 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.71 2022-01-18 14:21:00,131 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 14:21:00,131 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 14:21:02,507 - octoprint.server.util.sockjs - INFO - User pi logged in on the socket from client ::ffff:192.168.1.71 2022-01-18 14:21:03,186 - octoprint.plugins.tracking - INFO - Sent tracking event webui_load, payload: {'browser_name': 'Chrome', 'browser_version': '97.0.4692.71', 'os_name': 'Windows', 'os_version': '10'} 2022-01-18 14:21:07,104 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 14:21:07,105 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 14:21:07,194 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.71 2022-01-18 14:21:07,477 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.71 2022-01-18 14:21:07,494 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 14:21:07,494 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 14:21:07,961 - backoff - INFO - Backing off capture_jpeg(...) for 0.6s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:21:08,521 - backoff - INFO - Backing off capture_jpeg(...) for 0.3s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:21:08,841 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:21:11,882 - octoprint.server.util.sockjs - INFO - User pi logged in on the socket from client ::ffff:192.168.1.71 2022-01-18 14:21:12,555 - octoprint.plugins.tracking - INFO - Sent tracking event webui_load, payload: {'browser_name': 'Chrome', 'browser_version': '97.0.4692.71', 'os_name': 'Windows', 'os_version': '10'} 2022-01-18 14:21:18,880 - backoff - INFO - Backing off capture_jpeg(...) for 0.9s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:21:19,757 - backoff - INFO - Backing off capture_jpeg(...) for 1.1s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:21:20,862 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:21:21,435 - octoprint.plugins.action_command_notification - INFO - Got a notification: Waiting for heat-up... 2022-01-18 14:21:28,892 - backoff - INFO - Backing off capture_jpeg(...) for 0.2s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:21:29,084 - backoff - INFO - Backing off capture_jpeg(...) for 0.4s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:21:29,474 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:21:39,511 - backoff - INFO - Backing off capture_jpeg(...) for 0.1s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:21:39,626 - backoff - INFO - Backing off capture_jpeg(...) for 1.4s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:21:41,034 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:21:50,066 - backoff - INFO - Backing off capture_jpeg(...) for 0.8s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:21:50,866 - backoff - INFO - Backing off capture_jpeg(...) for 1.0s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:21:51,834 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:22:00,871 - backoff - INFO - Backing off capture_jpeg(...) for 1.0s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:22:01,857 - backoff - INFO - Backing off capture_jpeg(...) for 0.6s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:22:02,232 - octoprint.plugins.action_command_notification - INFO - Got a notification: Printing... 2022-01-18 14:22:02,244 - octoprint.plugins.action_command_notification - INFO - Got a notification: Bed Heating... 2022-01-18 14:22:02,444 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:22:11,486 - backoff - INFO - Backing off capture_jpeg(...) for 0.0s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:22:11,519 - backoff - INFO - Backing off capture_jpeg(...) for 1.6s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:22:13,131 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:22:15,587 - octoprint.plugins.action_command_notification - INFO - Got a notification: Printing... 2022-01-18 14:22:15,598 - octoprint.plugins.action_command_notification - INFO - Got a notification: Printing... 2022-01-18 14:22:22,162 - backoff - INFO - Backing off capture_jpeg(...) for 0.9s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:22:23,092 - backoff - INFO - Backing off capture_jpeg(...) for 1.3s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:22:24,368 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:22:27,432 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 29, current line = 30 | Last lines in terminal: | Recv: T:245.00 /245.00 B:79.96 /80.00 @:82 B@:43 | Recv: echo:busy: processing | Recv: T:245.00 /245.00 B:79.94 /80.00 @:80 B@:48 | Recv: ok | Send: N24 G92 E0*113 | Recv: X:10.4000 Y:20.0000 Z:0.2800 E:0.0000 Count X:832 Y:13600 Z:175 | Recv: ok | Send: N25 G1 Z2.0 F3000*44 | Recv: ok | Send: N26 G92 E0*115 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13186 Z:177 | Recv: ok | Send: N27 G92 E0*114 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13149 Z:177 | Recv: ok | Send: N28 G1 F3000 E-6.5*18 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 2022-01-18 14:22:27,463 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 29, current line = 30 | Last lines in terminal: | Send: N24 G92 E0*113 | Recv: X:10.4000 Y:20.0000 Z:0.2800 E:0.0000 Count X:832 Y:13600 Z:175 | Recv: ok | Send: N25 G1 Z2.0 F3000*44 | Recv: ok | Send: N26 G92 E0*115 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13186 Z:177 | Recv: ok | Send: N27 G92 E0*114 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13149 Z:177 | Recv: ok | Send: N28 G1 F3000 E-6.5*18 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 2022-01-18 14:22:27,494 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 29, current line = 30 | Last lines in terminal: | Recv: ok | Send: N26 G92 E0*115 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13186 Z:177 | Recv: ok | Send: N27 G92 E0*114 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13149 Z:177 | Recv: ok | Send: N28 G1 F3000 E-6.5*18 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 2022-01-18 14:22:27,524 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 29, current line = 30 | Last lines in terminal: | Send: N27 G92 E0*114 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13149 Z:177 | Recv: ok | Send: N28 G1 F3000 E-6.5*18 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 2022-01-18 14:22:27,553 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 29, current line = 30 | Last lines in terminal: | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 2022-01-18 14:22:27,718 - octoprint.util.comm - WARNING - Printer keeps requesting line 29 again and again, communication stuck 2022-01-18 14:22:27,719 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Error" 2022-01-18 14:22:27,724 - octoprint.util.comm - INFO - Force-sending M112 to the printer 2022-01-18 14:22:27,771 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2022-01-18 14:22:27,879 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2022-01-18 14:22:27,977 - octoprint.plugins.tracking - INFO - Sent tracking event commerror_resend_loop, payload: {'commerror_text': 'Printer keeps requesting line 29 again and again, communication stuck'} 2022-01-18 14:22:28,120 - octoprint.plugins.tracking - INFO - Sent tracking event print_failed, payload: {'origin': 'local', 'file': '73da9fe1157f6619f8666e1b02fb2b0562c691db', 'elapsed': 164, 'reason': 'error', 'commerror_text': 'Printer keeps requesting line 29 again and again, communication stuck'} 2022-01-18 14:22:28,279 - octoprint.util.comm - INFO - Firmware didn't send an 'ok' with their resend request. That's a known bug with some firmware variants out there. Simulating an ok to continue... 2022-01-18 14:23:50,105 - octoprint.plugins.thespaghettidetective - WARNING - Server WS ERROR: Connection is already closed. 2022-01-18 14:23:50,106 - octoprint.plugins.thespaghettidetective - WARNING - WS Closed 2022-01-18 14:25:11,286 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity changed from online to offline 2022-01-18 14:25:11,287 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 8.8.8.8:53 is not working 2022-01-18 14:25:11,287 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is not working 2022-01-18 14:25:19,070 - octoprint.plugins.thespaghettidetective - WARNING - Server WS ERROR: Connection is already closed. 2022-01-18 14:25:19,073 - octoprint.plugins.thespaghettidetective - WARNING - WS Closed 2022-01-18 14:25:32,689 - octoprint.plugins.thespaghettidetective - WARNING - Server WS ERROR: [Errno -3] Temporary failure in name resolution 2022-01-18 14:25:32,690 - octoprint.plugins.thespaghettidetective - WARNING - WS Closed 2022-01-18 14:26:44,799 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Opening serial connection" 2022-01-18 14:26:44,800 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200 2022-01-18 14:26:44,886 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial connection" to "Connecting" 2022-01-18 14:26:44,901 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 14:26:44,931 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 14:26:44,950 - octoprint.util.comm - INFO - Changing monitoring state from "Connecting" to "Operational" 2022-01-18 14:26:44,994 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 14:26:45,001 - octoprint.plugins.firmwareupdater - INFO - Got CONNECTED event 2022-01-18 14:26:45,002 - octoprint.plugins.firmwareupdater - INFO - Run postflash flag is not set 2022-01-18 14:26:45,056 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin CR-6 community firmware - release 6.1 (based on Marlin 2.0.8.1) (Jun 4 2021 16:53:51)" 2022-01-18 14:26:45,067 - octoprint.plugins.firmwareupdater - INFO - Setting BINARY_FILE_TRANSFER capability to False 2022-01-18 14:26:45,092 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting 2022-01-18 14:26:45,102 - octoprint.util.comm - INFO - Firmware states that it supports emergency GCODEs to be sent without waiting for an acknowledgement first 2022-01-18 14:26:58,397 - octoprint.server.api.system - INFO - Performing command for core:reboot: sudo shutdown -r now 2022-01-18 14:27:07,174 - octoprint.startup - INFO - ****************************************************************************** 2022-01-18 14:27:07,176 - octoprint.startup - INFO - Starting OctoPrint 1.7.2 2022-01-18 14:27:07,183 - octoprint.startup - INFO - ****************************************************************************** 2022-01-18 14:27:13,564 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: offline 2022-01-18 14:27:13,565 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 8.8.8.8:53 is not working 2022-01-18 14:27:13,566 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is not working 2022-01-18 14:27:13,577 - octoprint.startup - INFO - We don't appear to be online, not fetching plugin blacklist 2022-01-18 14:27:13,671 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2022-01-18 14:27:15,276 - octoprint.plugin.core - INFO - Plugin Octolapse (0.4.1) is disabled. 2022-01-18 14:27:15,325 - octoprint.plugin.core - INFO - Plugin DisplayLayerProgress Plugin (1.27.2) is disabled. 2022-01-18 14:27:15,442 - octoprint.startup - INFO - Added settings overlay from plugin dashboard 2022-01-18 14:27:15,450 - octoprint.plugin.core - INFO - Found 30 plugin(s) providing 28 mixin implementations, 71 hook handlers 2022-01-18 14:27:15,510 - octoprint.server.heartbeat - INFO - Starting server heartbeat, 900.0s interval 2022-01-18 14:27:15,549 - octoprint.server - INFO - Intermediary server started 2022-01-18 14:27:15,563 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/pi/.octoprint/uploads... 2022-01-18 14:27:15,591 - octoprint.filemanager.storage - INFO - ... file metadata for /home/pi/.octoprint/uploads initialized successfully. 2022-01-18 14:27:15,593 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_SHOW (needs: "Need(method='role', value='plugin_action_command_notification_show')") 2022-01-18 14:27:15,594 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_CLEAR (needs: "Need(method='role', value='plugin_action_command_notification_clear')") 2022-01-18 14:27:15,594 - octoprint.server - INFO - Added new permission from plugin action_command_prompt: PLUGIN_ACTION_COMMAND_PROMPT_INTERACT (needs: "Need(method='role', value='plugin_action_command_prompt_interact')") 2022-01-18 14:27:15,594 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_READ (needs: "Need(method='role', value='plugin_announcements_read')") 2022-01-18 14:27:15,595 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_MANAGE (needs: "Need(method='role', value='plugin_announcements_read'), Need(method='role', value='plugin_announcements_manage')") 2022-01-18 14:27:15,595 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_ADMIN (needs: "Need(method='role', value='plugin_appkeys_admin')") 2022-01-18 14:27:15,595 - octoprint.server - INFO - Added new permission from plugin backup: PLUGIN_BACKUP_ACCESS (needs: "Need(method='role', value='plugin_backup_access')") 2022-01-18 14:27:15,596 - octoprint.server - INFO - Added new permission from plugin dashboard: PLUGIN_DASHBOARD_ADMIN (needs: "Need(method='role', value='plugin_dashboard_admin')") 2022-01-18 14:27:15,596 - octoprint.server - INFO - Added new permission from plugin firmware_check: PLUGIN_FIRMWARE_CHECK_DISPLAY (needs: "Need(method='role', value='plugin_firmware_check_display')") 2022-01-18 14:27:15,596 - octoprint.server - INFO - Added new permission from plugin logging: PLUGIN_LOGGING_MANAGE (needs: "Need(method='role', value='plugin_logging_manage')") 2022-01-18 14:27:15,596 - octoprint.server - INFO - Added new permission from plugin pi_support: PLUGIN_PI_SUPPORT_STATUS (needs: "Need(method='role', value='plugin_pi_support_check')") 2022-01-18 14:27:15,597 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_MANAGE (needs: "Need(method='role', value='plugin_pluginmanager_manage')") 2022-01-18 14:27:15,597 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_INSTALL (needs: "Need(method='role', value='plugin_pluginmanager_manage'), Need(method='role', value='plugin_pluginmanager_install')") 2022-01-18 14:27:15,597 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CHECK (needs: "Need(method='role', value='plugin_softwareupdate_check')") 2022-01-18 14:27:15,597 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_UPDATE (needs: "Need(method='role', value='plugin_softwareupdate_update')") 2022-01-18 14:27:15,597 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CONFIGURE (needs: "Need(method='role', value='plugin_softwareupdate_configure')") 2022-01-18 14:27:15,608 - octoprint.printer.standard - INFO - Using print time estimator provided by PrintTimeGenius 2022-01-18 14:27:15,609 - octoprint.printer.standard - INFO - Using print time estimator provided by SlicerEstimator 2022-01-18 14:27:16,533 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2022-01-18 14:27:17,266 - octoprint.util.pip - INFO - Version of pip is 21.3.1 2022-01-18 14:27:17,268 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-01-18 14:27:17,268 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-01-18 14:27:17,372 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk 2022-01-18 14:27:17,462 - octoprint.plugins.firmwareupdater - INFO - Python binproto2 package installed: False 2022-01-18 14:27:17,495 - octoprint.plugin.core - INFO - Initialized 28 plugin implementation(s) 2022-01-18 14:27:17,505 - octoprint.plugin.core - INFO - 30 plugin(s) registered with the system: | Access Anywhere - The Spaghetti Detective (1.8.9) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_thespaghettidetective | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/appkeys | Backup & Restore (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/backup | Bed Visualizer (1.1.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_bedlevelvisualizer | Core Wizard (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/corewizard | Creality Temperature (1.2.4) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_CrealityTemperature | Creality-2x-temperature-reporting-fix (0.0.4) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_ender3v2tempfix | CuraEngine Legacy (1.1.2) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_curalegacy | Dashboard (1.19.6) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_dashboard | Discovery (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/discovery | !DisplayLayerProgress Plugin (1.27.2) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_DisplayLayerProgress | Error Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/errortracking | Event Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/eventmanager | File Check (2021.2.23) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_file_check | Firmware Check (2021.10.11) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmware_check | Firmware Updater (1.13.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmwareupdater | GCode Viewer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/gcodeviewer | Logging (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/logging | !Octolapse (0.4.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_octolapse | Pi Support Plugin (2021.10.28) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/pluginmanager | PrintTimeGenius Plugin (2.2.8) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_PrintTimeGenius | Slicer Estimator (1.2.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_SlicerEstimator | Software Update (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/softwareupdate | TouchUI (0.3.18) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_touchui | Virtual Printer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2022-01-18 14:27:17,527 - octoprint.environment - INFO - Detected environment is Python 3.9.2 under Linux (linux). Details: | hardware: | cores: 4 | freq: 1800.0 | ram: 1909063680 | os: | bits: 32 | id: linux | platform: linux | plugins: | pi_support: | model: Raspberry Pi 4 Model B Rev 1.5 | octopi_version: 1.0.0 | throttle_state: '0x0' | python: | pip: 21.3.1 | version: 3.9.2 | virtualenv: /home/pi/oprint 2022-01-18 14:27:17,537 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/webassets... 2022-01-18 14:27:17,553 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-cache... 2022-01-18 14:27:18,046 - octoprint.plugins.firmwareupdater - INFO - Setting maximum upload size for /flash to 5243904 2022-01-18 14:27:18,046 - octoprint.server - INFO - Shutting down intermediary server... 2022-01-18 14:27:18,053 - octoprint.server - INFO - Intermediary server shut down 2022-01-18 14:27:18,054 - octoprint.events - INFO - Processing startup event, this is our first event 2022-01-18 14:27:18,054 - octoprint.events - INFO - Adding 1 events to queue that were held back before startup event 2022-01-18 14:27:18,055 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue... 2022-01-18 14:27:18,056 - octoprint.server - INFO - Autoconnect on startup is configured, trying to connect to the printer... 2022-01-18 14:27:18,059 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue 2022-01-18 14:27:18,081 - octoprint.server - INFO - Trying to connect to configured serial port None 2022-01-18 14:27:18,103 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2022-01-18 14:27:18,106 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder... 2022-01-18 14:27:18,109 - octoprint.server.util.watchdog - INFO - ... initial scan done. 2022-01-18 14:27:18,140 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 7 port/baudrate candidates: /dev/ttyUSB0@115200, /dev/ttyUSB0@250000, /dev/ttyUSB0@230400, /dev/ttyUSB0@57600, /dev/ttyUSB0@38400, /dev/ttyUSB0@19200, /dev/ttyUSB0@9600 2022-01-18 14:27:18,140 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200 2022-01-18 14:27:18,140 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200 2022-01-18 14:27:18,158 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-18 14:27:18,161 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 14:27:18,169 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Operational" 2022-01-18 14:27:18,171 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 14:27:18,188 - octoprint.plugins.firmwareupdater - INFO - Got CONNECTED event 2022-01-18 14:27:18,192 - octoprint.plugins.firmwareupdater - INFO - Run postflash flag is not set 2022-01-18 14:27:18,218 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin CR-6 community firmware - release 6.1 (based on Marlin 2.0.8.1) (Jun 4 2021 16:53:51)" 2022-01-18 14:27:18,235 - octoprint.plugins.firmwareupdater - INFO - Setting BINARY_FILE_TRANSFER capability to False 2022-01-18 14:27:18,252 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting 2022-01-18 14:27:18,262 - octoprint.util.comm - INFO - Firmware states that it supports emergency GCODEs to be sent without waiting for an acknowledgement first 2022-01-18 14:27:18,954 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on raspberrypi._http._tcp.local.' for _http._tcp.local. 2022-01-18 14:27:19,772 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on raspberrypi._octoprint._tcp.local.' for _octoprint._tcp.local. 2022-01-18 14:27:19,836 - octoprint.plugins.curalegacy - INFO - Path to CuraEngine has not been configured or does not exist (currently set to None), Cura will not be selectable for slicing 2022-01-18 14:27:19,843 - octoprint.server - INFO - Listening on http://127.0.0.1:5000 2022-01-18 14:27:19,911 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2022-01-18 14:27:20,727 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2022-01-18 14:27:20,733 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-01-18 14:27:20,743 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-01-18 14:27:20,782 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 11.7GB. That is considered sufficient for updating. 2022-01-18 14:27:20,782 - octoprint.plugins.softwareupdate - INFO - Not fetching check overlays, we are offline 2022-01-18 14:27:20,921 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2022-01-18 14:27:21,879 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity changed from offline to online 2022-01-18 14:27:21,919 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.71 2022-01-18 14:27:21,925 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2022-01-18 14:27:21,986 - octoprint.plugins.SlicerEstimator - INFO - Started up SlicerEstimator 2022-01-18 14:27:21,990 - octoprint.plugins.bedlevelvisualizer - INFO - OctoPrint-BedLevelVisualizer loaded! 2022-01-18 14:27:21,992 - octoprint.plugins.dashboard - INFO - Dashboard started 2022-01-18 14:27:22,059 - octoprint.JsFrontendErrors(Dash) - INFO - Js Logger (Dash) started 2022-01-18 14:27:22,156 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.71 2022-01-18 14:27:22,326 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 7, 'printer_state': 'OPERATIONAL'} 2022-01-18 14:27:22,541 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.71 2022-01-18 14:27:22,721 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 14:27:22,722 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 14:27:22,749 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'http://192.168.1.76/', 'path': '/', 'query_string': 'l10n=en'} 2022-01-18 14:27:22,825 - octoprint.server.util.sockjs - INFO - User pi logged in on the socket from client ::ffff:192.168.1.71 2022-01-18 14:27:23,180 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2022-01-18 14:27:23,952 - octoprint.plugins.tracking - INFO - Sent tracking event pong, payload: {'version': '1.7.2', 'os': 'linux', 'bits': 32, 'python': '3.9.2', 'pip': '21.3.1', 'cores': 4, 'freq': 1800.0, 'ram': 1909063680, 'pi_model': 'Raspberry Pi 4 Model B Rev 1.5', 'octopi_version': '1.0.0', 'plugins': 'touchui:0.3.18,thespaghettidetective:1.8.9,slicerestimator:1.2.0,printtimegenius:2.2.8,firmwareupdater:1.13.0,dashboard:1.19.6,curalegacy:1.1.2,crealitytemperature:1.2.4,ender3v2tempfix:0.0.4,bedlevelvisualizer:1.1.1'} 2022-01-18 14:27:24,004 - octoprint.plugins.thespaghettidetective - INFO - Linked printer: {'is_pro': True, 'id': 95565, 'name': 'My Awesome Cloud Printer'} 2022-01-18 14:27:24,013 - octoprint.plugins.thespaghettidetective - INFO - Starting webcam streamer 2022-01-18 14:27:24,129 - octoprint.plugins.tracking - INFO - Sent tracking event startup, payload: {'version': '1.7.2', 'os': 'linux', 'bits': 32, 'python': '3.9.2', 'pip': '21.3.1', 'cores': 4, 'freq': 1800.0, 'ram': 1909063680, 'pi_model': 'Raspberry Pi 4 Model B Rev 1.5', 'octopi_version': '1.0.0'} 2022-01-18 14:27:26,433 - octoprint.plugins.thespaghettidetective - WARNING - No camera detected. Skipping webcam streaming 2022-01-18 14:27:32,078 - octoprint.server.preemptive_cache - INFO - ... done in 9.33s 2022-01-18 14:28:46,029 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.71 2022-01-18 14:28:46,050 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 14:28:46,051 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 14:28:46,084 - octoprint.server.util.sockjs - INFO - User pi logged in on the socket from client ::ffff:192.168.1.71 2022-01-18 14:28:49,447 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.71 2022-01-18 14:29:05,764 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Offline" 2022-01-18 14:29:05,777 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2022-01-18 14:29:07,034 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Opening serial connection" 2022-01-18 14:29:07,036 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200 2022-01-18 14:29:07,079 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial connection" to "Connecting" 2022-01-18 14:29:07,086 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 14:29:07,094 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 14:29:07,097 - octoprint.util.comm - INFO - Changing monitoring state from "Connecting" to "Operational" 2022-01-18 14:29:07,115 - octoprint.plugins.firmwareupdater - INFO - Got CONNECTED event 2022-01-18 14:29:07,116 - octoprint.plugins.firmwareupdater - INFO - Run postflash flag is not set 2022-01-18 14:29:07,121 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 14:29:07,179 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin CR-6 community firmware - release 6.1 (based on Marlin 2.0.8.1) (Jun 4 2021 16:53:51)" 2022-01-18 14:29:07,210 - octoprint.plugins.firmwareupdater - INFO - Setting BINARY_FILE_TRANSFER capability to False 2022-01-18 14:29:07,257 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting 2022-01-18 14:29:07,265 - octoprint.util.comm - INFO - Firmware states that it supports emergency GCODEs to be sent without waiting for an acknowledgement first 2022-01-18 14:29:07,404 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {'firmware_name': 'Marlin CR-6 community firmware - release 6.1 (based on Marlin 2.0.8.1) (Jun 4 2021 16:53:51)', 'printer_port': '/dev/ttyUSB0', 'printer_baudrate': 115200} 2022-01-18 14:29:28,253 - octoprint.server.api.system - INFO - Performing command for core:restart_safe: sudo service octoprint restart 2022-01-18 14:30:59,328 - octoprint.startup - INFO - ****************************************************************************** 2022-01-18 14:30:59,330 - octoprint.startup - INFO - Starting OctoPrint 1.7.2 2022-01-18 14:30:59,331 - octoprint.startup - INFO - Starting in SAFE MODE. Third party plugins will be disabled! 2022-01-18 14:30:59,331 - octoprint.startup - INFO - Reason for safe mode: setting in config.yaml 2022-01-18 14:30:59,331 - octoprint.startup - INFO - ****************************************************************************** 2022-01-18 14:30:59,616 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity changed from offline to online 2022-01-18 14:30:59,714 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: online 2022-01-18 14:30:59,714 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 8.8.8.8:53 is working 2022-01-18 14:30:59,714 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is working 2022-01-18 14:30:59,902 - octoprint.startup - INFO - Blacklist processing done, adding 3 blacklisted plugin versions: roomtemp (any), GcodeEditor (>=0.1.1,<=0.2.8), gcodeleveling (>=0.1.0,<=0.1.1) 2022-01-18 14:30:59,903 - octoprint.plugin.core - WARNING - Invalid version requirement >=0.1.1,<=0.2.8 for blacklist entry GcodeEditor, ignoring 2022-01-18 14:30:59,903 - octoprint.plugin.core - WARNING - Invalid version requirement >=0.1.0,<=0.1.1 for blacklist entry gcodeleveling, ignoring 2022-01-18 14:30:59,931 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2022-01-18 14:31:00,864 - octoprint.plugin.core - INFO - Plugin Octolapse (0.4.1) is disabled. 2022-01-18 14:31:00,949 - octoprint.plugin.core - INFO - Plugin DisplayLayerProgress Plugin (1.27.2) is disabled. 2022-01-18 14:31:01,021 - octoprint.plugin.core - INFO - Found 30 plugin(s) providing 18 mixin implementations, 38 hook handlers 2022-01-18 14:31:01,102 - octoprint.server.heartbeat - INFO - Starting server heartbeat, 900.0s interval 2022-01-18 14:31:01,117 - octoprint.server - INFO - Intermediary server started 2022-01-18 14:31:01,130 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/pi/.octoprint/uploads... 2022-01-18 14:31:01,144 - octoprint.filemanager.storage - INFO - ... file metadata for /home/pi/.octoprint/uploads initialized successfully. 2022-01-18 14:31:01,147 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_SHOW (needs: "Need(method='role', value='plugin_action_command_notification_show')") 2022-01-18 14:31:01,147 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_CLEAR (needs: "Need(method='role', value='plugin_action_command_notification_clear')") 2022-01-18 14:31:01,147 - octoprint.server - INFO - Added new permission from plugin action_command_prompt: PLUGIN_ACTION_COMMAND_PROMPT_INTERACT (needs: "Need(method='role', value='plugin_action_command_prompt_interact')") 2022-01-18 14:31:01,147 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_READ (needs: "Need(method='role', value='plugin_announcements_read')") 2022-01-18 14:31:01,148 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_MANAGE (needs: "Need(method='role', value='plugin_announcements_read'), Need(method='role', value='plugin_announcements_manage')") 2022-01-18 14:31:01,148 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_ADMIN (needs: "Need(method='role', value='plugin_appkeys_admin')") 2022-01-18 14:31:01,148 - octoprint.server - INFO - Added new permission from plugin backup: PLUGIN_BACKUP_ACCESS (needs: "Need(method='role', value='plugin_backup_access')") 2022-01-18 14:31:01,148 - octoprint.server - INFO - Added new permission from plugin firmware_check: PLUGIN_FIRMWARE_CHECK_DISPLAY (needs: "Need(method='role', value='plugin_firmware_check_display')") 2022-01-18 14:31:01,148 - octoprint.server - INFO - Added new permission from plugin logging: PLUGIN_LOGGING_MANAGE (needs: "Need(method='role', value='plugin_logging_manage')") 2022-01-18 14:31:01,149 - octoprint.server - INFO - Added new permission from plugin pi_support: PLUGIN_PI_SUPPORT_STATUS (needs: "Need(method='role', value='plugin_pi_support_check')") 2022-01-18 14:31:01,149 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_MANAGE (needs: "Need(method='role', value='plugin_pluginmanager_manage')") 2022-01-18 14:31:01,149 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_INSTALL (needs: "Need(method='role', value='plugin_pluginmanager_install'), Need(method='role', value='plugin_pluginmanager_manage')") 2022-01-18 14:31:01,150 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CHECK (needs: "Need(method='role', value='plugin_softwareupdate_check')") 2022-01-18 14:31:01,150 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_UPDATE (needs: "Need(method='role', value='plugin_softwareupdate_update')") 2022-01-18 14:31:01,150 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CONFIGURE (needs: "Need(method='role', value='plugin_softwareupdate_configure')") 2022-01-18 14:31:01,906 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2022-01-18 14:31:02,649 - octoprint.util.pip - INFO - Version of pip is 21.3.1 2022-01-18 14:31:02,651 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-01-18 14:31:02,651 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-01-18 14:31:02,749 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk 2022-01-18 14:31:02,789 - octoprint.plugin.core - INFO - Initialized 18 plugin implementation(s) 2022-01-18 14:31:02,795 - octoprint.plugin.core - INFO - 30 plugin(s) registered with the system: | !Access Anywhere - The Spaghetti Detective (1.8.9) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_thespaghettidetective | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/appkeys | Backup & Restore (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/backup | !Bed Visualizer (1.1.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_bedlevelvisualizer | Core Wizard (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/corewizard | !Creality Temperature (1.2.4) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_CrealityTemperature | !Creality-2x-temperature-reporting-fix (0.0.4) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_ender3v2tempfix | !CuraEngine Legacy (1.1.2) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_curalegacy | !Dashboard (1.19.6) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_dashboard | Discovery (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/discovery | !DisplayLayerProgress Plugin (1.27.2) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_DisplayLayerProgress | Error Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/errortracking | Event Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/eventmanager | File Check (2021.2.23) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_file_check | Firmware Check (2021.10.11) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmware_check | !Firmware Updater (1.13.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmwareupdater | GCode Viewer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/gcodeviewer | Logging (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/logging | !Octolapse (0.4.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_octolapse | Pi Support Plugin (2021.10.28) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/pluginmanager | !PrintTimeGenius Plugin (2.2.8) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_PrintTimeGenius | !Slicer Estimator (1.2.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_SlicerEstimator | Software Update (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/softwareupdate | !TouchUI (0.3.18) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_touchui | Virtual Printer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2022-01-18 14:31:02,819 - octoprint.environment - INFO - Detected environment is Python 3.9.2 under Linux (linux). Details: | hardware: | cores: 4 | freq: 1800.0 | ram: 1909063680 | os: | bits: 32 | id: linux | platform: linux | plugins: | pi_support: | model: Raspberry Pi 4 Model B Rev 1.5 | octopi_version: 1.0.0 | throttle_state: '0x0' | python: | pip: 21.3.1 | version: 3.9.2 | virtualenv: /home/pi/oprint 2022-01-18 14:31:02,832 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/webassets... 2022-01-18 14:31:02,854 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-cache... 2022-01-18 14:31:03,218 - octoprint.server - INFO - Shutting down intermediary server... 2022-01-18 14:31:03,534 - octoprint.server - INFO - Intermediary server shut down 2022-01-18 14:31:03,536 - octoprint.events - INFO - Processing startup event, this is our first event 2022-01-18 14:31:03,536 - octoprint.events - INFO - Adding 2 events to queue that were held back before startup event 2022-01-18 14:31:03,537 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue... 2022-01-18 14:31:03,543 - octoprint.server - INFO - Autoconnect on startup is configured, trying to connect to the printer... 2022-01-18 14:31:03,555 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue 2022-01-18 14:31:03,562 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json 2022-01-18 14:31:03,613 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2022-01-18 14:31:03,816 - octoprint.plugins.tracking - INFO - Sent tracking event system_unthrottled, payload: {'throttled_now': False, 'throttled_past': False, 'throttled_mask': 0, 'throttled_voltage_now': False, 'throttled_voltage_past': False, 'throttled_overheat_now': False, 'throttled_overheat_past': False} 2022-01-18 14:31:04,109 - octoprint.server - INFO - Trying to connect to configured serial port None 2022-01-18 14:31:04,240 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2022-01-18 14:31:04,275 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder... 2022-01-18 14:31:04,283 - octoprint.server.util.watchdog - INFO - ... initial scan done. 2022-01-18 14:31:04,544 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2022-01-18 14:31:04,553 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 7 port/baudrate candidates: /dev/ttyUSB0@115200, /dev/ttyUSB0@250000, /dev/ttyUSB0@230400, /dev/ttyUSB0@57600, /dev/ttyUSB0@38400, /dev/ttyUSB0@19200, /dev/ttyUSB0@9600 2022-01-18 14:31:04,553 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200 2022-01-18 14:31:04,554 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200 2022-01-18 14:31:04,574 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-18 14:31:04,576 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 14:31:04,582 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Operational" 2022-01-18 14:31:04,588 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 14:31:04,621 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin CR-6 community firmware - release 6.1 (based on Marlin 2.0.8.1) (Jun 4 2021 16:53:51)" 2022-01-18 14:31:04,631 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting 2022-01-18 14:31:04,648 - octoprint.util.comm - INFO - Firmware states that it supports emergency GCODEs to be sent without waiting for an acknowledgement first 2022-01-18 14:31:04,773 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {'firmware_name': 'Marlin CR-6 community firmware - release 6.1 (based on Marlin 2.0.8.1) (Jun 4 2021 16:53:51)', 'printer_port': None, 'printer_baudrate': 0} 2022-01-18 14:31:05,190 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on raspberrypi._http._tcp.local.' for _http._tcp.local. 2022-01-18 14:31:05,514 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2022-01-18 14:31:05,516 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-01-18 14:31:05,517 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-01-18 14:31:05,576 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk 2022-01-18 14:31:06,027 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on raspberrypi._octoprint._tcp.local.' for _octoprint._tcp.local. 2022-01-18 14:31:06,038 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance on raspberrypi for SSDP 2022-01-18 14:31:06,047 - octoprint.server - INFO - Listening on http://127.0.0.1:5000 2022-01-18 14:31:06,048 - octoprint.server - INFO - Server started successfully in safe mode as requested from config, removing flag 2022-01-18 14:31:06,154 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2022-01-18 14:31:06,518 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.71 2022-01-18 14:31:06,648 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 14:31:06,648 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 14:31:06,988 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2022-01-18 14:31:06,999 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-01-18 14:31:06,999 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-01-18 14:31:07,089 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 11.7GB. That is considered sufficient for updating. 2022-01-18 14:31:07,259 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2022-01-18 14:31:07,384 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'http://192.168.1.76/', 'path': '/', 'query_string': 'l10n=en'} 2022-01-18 14:31:07,491 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 6, 'printer_state': 'OPERATIONAL'} 2022-01-18 14:31:07,753 - octoprint.plugins.tracking - INFO - Sent tracking event pong, payload: {'version': '1.7.2', 'os': 'linux', 'bits': 32, 'python': '3.9.2', 'pip': '21.3.1', 'cores': 4, 'freq': 1800.0, 'ram': 1909063680, 'pi_model': 'Raspberry Pi 4 Model B Rev 1.5', 'octopi_version': '1.0.0', 'plugins': ''} 2022-01-18 14:31:07,944 - octoprint.server.util.sockjs - INFO - User pi logged in on the socket from client ::ffff:192.168.1.71 2022-01-18 14:31:07,954 - octoprint.plugins.tracking - INFO - Sent tracking event startup, payload: {'version': '1.7.2', 'os': 'linux', 'bits': 32, 'python': '3.9.2', 'pip': '21.3.1', 'cores': 4, 'freq': 1800.0, 'ram': 1909063680, 'pi_model': 'Raspberry Pi 4 Model B Rev 1.5', 'octopi_version': '1.0.0'} 2022-01-18 14:31:10,298 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 14:31:10,299 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 14:31:14,103 - octoprint.server.preemptive_cache - INFO - ... done in 6.72s 2022-01-18 14:31:14,148 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.71 2022-01-18 14:31:14,539 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.71 2022-01-18 14:31:14,620 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 14:31:14,620 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 14:31:15,662 - octoprint.server.util.sockjs - INFO - User pi logged in on the socket from client ::ffff:192.168.1.71 2022-01-18 14:31:16,294 - octoprint.plugins.tracking - INFO - Sent tracking event webui_load, payload: {'browser_name': 'Chrome', 'browser_version': '97.0.4692.71', 'os_name': 'Windows', 'os_version': '10'} 2022-01-18 14:31:21,269 - octoprint.printer.standard.job - INFO - Print job selected - origin: local, path: CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode, owner: pi, user: pi 2022-01-18 14:31:21,289 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting" 2022-01-18 14:31:21,296 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode, owner: pi, user: pi 2022-01-18 14:31:21,349 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 14:31:21,360 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Printing" 2022-01-18 14:31:21,385 - octoprint.plugins.action_command_notification - INFO - Got a notification: Time Left 11h08m07s 2022-01-18 14:31:21,419 - octoprint.plugins.action_command_notification - INFO - Got a notification: Bed Cooling... 2022-01-18 14:31:21,434 - octoprint.plugins.action_command_notification - INFO - Got a notification: Printing... 2022-01-18 14:31:21,511 - octoprint.plugins.tracking - INFO - Sent tracking event print_started, payload: {'origin': 'local', 'file': '73da9fe1157f6619f8666e1b02fb2b0562c691db'} 2022-01-18 14:31:23,476 - octoprint.util.comm - INFO - Printer seems to support the busy protocol, will adjust timeouts and set busy interval accordingly 2022-01-18 14:31:34,812 - octoprint.plugins.action_command_notification - INFO - Got a notification: Printing... 2022-01-18 14:31:34,819 - octoprint.util.comm - INFO - Telling the printer to set the busy interval to our "communicationBusy" timeout - 1s = 2s 2022-01-18 14:32:12,678 - octoprint.plugins.action_command_notification - INFO - Got a notification: Waiting for heat-up... 2022-01-18 14:32:53,180 - octoprint.plugins.action_command_notification - INFO - Got a notification: Printing... 2022-01-18 14:32:53,194 - octoprint.plugins.action_command_notification - INFO - Got a notification: Bed Heating... 2022-01-18 14:33:06,537 - octoprint.plugins.action_command_notification - INFO - Got a notification: Printing... 2022-01-18 14:33:06,547 - octoprint.plugins.action_command_notification - INFO - Got a notification: Printing... 2022-01-18 14:33:18,340 - octoprint.plugins.action_command_notification - INFO - Got a notification: DASHBOARD_LAYER_INDICATOR 1 2022-01-18 14:33:18,372 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 30, current line = 31 | Last lines in terminal: | Recv: ok | Send: N24 G92 E0*113 | Recv: X:10.4000 Y:20.0000 Z:0.2800 E:0.0000 Count X:832 Y:13600 Z:175 | Recv: ok | Send: N25 G1 Z2.0 F3000*44 | Recv: ok | Send: N26 G92 E0*115 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13187 Z:177 | Recv: ok | Send: N27 G92 E0*114 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13162 Z:177 | Recv: ok | Send: N28 G1 F3000 E-6.5*18 | Recv: ok | Send: N29 M117 DASHBOARD_LAYER_INDICATOR 1*104 | Recv: //action:notification DASHBOARD_LAYER_INDICATOR 1 | Recv: ok | Send: N30 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*40 | Recv: Error:No Checksum with line number, Last Line: 29 | Recv: Resend: 30 2022-01-18 14:33:18,402 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 30, current line = 31 | Last lines in terminal: | Send: N25 G1 Z2.0 F3000*44 | Recv: ok | Send: N26 G92 E0*115 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13187 Z:177 | Recv: ok | Send: N27 G92 E0*114 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13162 Z:177 | Recv: ok | Send: N28 G1 F3000 E-6.5*18 | Recv: ok | Send: N29 M117 DASHBOARD_LAYER_INDICATOR 1*104 | Recv: //action:notification DASHBOARD_LAYER_INDICATOR 1 | Recv: ok | Send: N30 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*40 | Recv: Error:No Checksum with line number, Last Line: 29 | Recv: Resend: 30 | Recv: ok | Send: N30 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*40 | Recv: Error:No Checksum with line number, Last Line: 29 | Recv: Resend: 30 2022-01-18 14:33:18,432 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 30, current line = 31 | Last lines in terminal: | Recv: ok | Send: N27 G92 E0*114 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13162 Z:177 | Recv: ok | Send: N28 G1 F3000 E-6.5*18 | Recv: ok | Send: N29 M117 DASHBOARD_LAYER_INDICATOR 1*104 | Recv: //action:notification DASHBOARD_LAYER_INDICATOR 1 | Recv: ok | Send: N30 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*40 | Recv: Error:No Checksum with line number, Last Line: 29 | Recv: Resend: 30 | Recv: ok | Send: N30 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*40 | Recv: Error:No Checksum with line number, Last Line: 29 | Recv: Resend: 30 | Recv: ok | Send: N30 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*40 | Recv: Error:No Checksum with line number, Last Line: 29 | Recv: Resend: 30 2022-01-18 14:33:18,461 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 30, current line = 31 | Last lines in terminal: | Send: N28 G1 F3000 E-6.5*18 | Recv: ok | Send: N29 M117 DASHBOARD_LAYER_INDICATOR 1*104 | Recv: //action:notification DASHBOARD_LAYER_INDICATOR 1 | Recv: ok | Send: N30 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*40 | Recv: Error:No Checksum with line number, Last Line: 29 | Recv: Resend: 30 | Recv: ok | Send: N30 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*40 | Recv: Error:No Checksum with line number, Last Line: 29 | Recv: Resend: 30 | Recv: ok | Send: N30 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*40 | Recv: Error:No Checksum with line number, Last Line: 29 | Recv: Resend: 30 | Recv: ok | Send: N30 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*40 | Recv: Error:No Checksum with line number, Last Line: 29 | Recv: Resend: 30 2022-01-18 14:33:18,489 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 30, current line = 31 | Last lines in terminal: | Recv: ok | Send: N30 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*40 | Recv: Error:No Checksum with line number, Last Line: 29 | Recv: Resend: 30 | Recv: ok | Send: N30 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*40 | Recv: Error:No Checksum with line number, Last Line: 29 | Recv: Resend: 30 | Recv: ok | Send: N30 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*40 | Recv: Error:No Checksum with line number, Last Line: 29 | Recv: Resend: 30 | Recv: ok | Send: N30 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*40 | Recv: Error:No Checksum with line number, Last Line: 29 | Recv: Resend: 30 | Recv: ok | Send: N30 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*40 | Recv: Error:No Checksum with line number, Last Line: 29 | Recv: Resend: 30 2022-01-18 14:33:18,648 - octoprint.util.comm - WARNING - Printer keeps requesting line 30 again and again, communication stuck 2022-01-18 14:33:18,649 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Error" 2022-01-18 14:33:18,656 - octoprint.util.comm - INFO - Force-sending M112 to the printer 2022-01-18 14:33:18,693 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2022-01-18 14:33:18,760 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2022-01-18 14:33:19,200 - octoprint.util.comm - INFO - Firmware didn't send an 'ok' with their resend request. That's a known bug with some firmware variants out there. Simulating an ok to continue... 2022-01-18 14:41:13,488 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.71 2022-01-18 14:41:13,535 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 14:41:13,536 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 14:41:13,569 - octoprint.server.util.sockjs - INFO - User pi logged in on the socket from client ::ffff:192.168.1.71 2022-01-18 14:41:59,359 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.71 2022-01-18 14:46:01,104 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2022-01-18 14:46:07,471 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 906, 'printer_state': 'OFFLINE'} 2022-01-18 14:47:51,104 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.71 2022-01-18 14:48:53,825 - octoprint.startup - INFO - ****************************************************************************** 2022-01-18 14:48:53,827 - octoprint.startup - INFO - Starting OctoPrint 1.7.2 2022-01-18 14:48:53,828 - octoprint.startup - INFO - ****************************************************************************** 2022-01-18 14:49:00,244 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: offline 2022-01-18 14:49:00,245 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 8.8.8.8:53 is not working 2022-01-18 14:49:00,245 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is not working 2022-01-18 14:49:00,253 - octoprint.startup - INFO - We don't appear to be online, not fetching plugin blacklist 2022-01-18 14:49:00,331 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2022-01-18 14:49:01,939 - octoprint.plugin.core - INFO - Plugin Octolapse (0.4.1) is disabled. 2022-01-18 14:49:01,987 - octoprint.plugin.core - INFO - Plugin DisplayLayerProgress Plugin (1.27.2) is disabled. 2022-01-18 14:49:02,100 - octoprint.startup - INFO - Added settings overlay from plugin dashboard 2022-01-18 14:49:02,108 - octoprint.plugin.core - INFO - Found 30 plugin(s) providing 28 mixin implementations, 71 hook handlers 2022-01-18 14:49:02,174 - octoprint.server.heartbeat - INFO - Starting server heartbeat, 900.0s interval 2022-01-18 14:49:02,212 - octoprint.server - INFO - Intermediary server started 2022-01-18 14:49:02,226 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/pi/.octoprint/uploads... 2022-01-18 14:49:02,251 - octoprint.filemanager.storage - INFO - ... file metadata for /home/pi/.octoprint/uploads initialized successfully. 2022-01-18 14:49:02,253 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_SHOW (needs: "Need(method='role', value='plugin_action_command_notification_show')") 2022-01-18 14:49:02,254 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_CLEAR (needs: "Need(method='role', value='plugin_action_command_notification_clear')") 2022-01-18 14:49:02,254 - octoprint.server - INFO - Added new permission from plugin action_command_prompt: PLUGIN_ACTION_COMMAND_PROMPT_INTERACT (needs: "Need(method='role', value='plugin_action_command_prompt_interact')") 2022-01-18 14:49:02,254 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_READ (needs: "Need(method='role', value='plugin_announcements_read')") 2022-01-18 14:49:02,255 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_MANAGE (needs: "Need(method='role', value='plugin_announcements_read'), Need(method='role', value='plugin_announcements_manage')") 2022-01-18 14:49:02,255 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_ADMIN (needs: "Need(method='role', value='plugin_appkeys_admin')") 2022-01-18 14:49:02,255 - octoprint.server - INFO - Added new permission from plugin backup: PLUGIN_BACKUP_ACCESS (needs: "Need(method='role', value='plugin_backup_access')") 2022-01-18 14:49:02,255 - octoprint.server - INFO - Added new permission from plugin dashboard: PLUGIN_DASHBOARD_ADMIN (needs: "Need(method='role', value='plugin_dashboard_admin')") 2022-01-18 14:49:02,256 - octoprint.server - INFO - Added new permission from plugin firmware_check: PLUGIN_FIRMWARE_CHECK_DISPLAY (needs: "Need(method='role', value='plugin_firmware_check_display')") 2022-01-18 14:49:02,256 - octoprint.server - INFO - Added new permission from plugin logging: PLUGIN_LOGGING_MANAGE (needs: "Need(method='role', value='plugin_logging_manage')") 2022-01-18 14:49:02,256 - octoprint.server - INFO - Added new permission from plugin pi_support: PLUGIN_PI_SUPPORT_STATUS (needs: "Need(method='role', value='plugin_pi_support_check')") 2022-01-18 14:49:02,256 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_MANAGE (needs: "Need(method='role', value='plugin_pluginmanager_manage')") 2022-01-18 14:49:02,256 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_INSTALL (needs: "Need(method='role', value='plugin_pluginmanager_install'), Need(method='role', value='plugin_pluginmanager_manage')") 2022-01-18 14:49:02,257 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CHECK (needs: "Need(method='role', value='plugin_softwareupdate_check')") 2022-01-18 14:49:02,257 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_UPDATE (needs: "Need(method='role', value='plugin_softwareupdate_update')") 2022-01-18 14:49:02,257 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CONFIGURE (needs: "Need(method='role', value='plugin_softwareupdate_configure')") 2022-01-18 14:49:02,271 - octoprint.printer.standard - INFO - Using print time estimator provided by PrintTimeGenius 2022-01-18 14:49:02,271 - octoprint.printer.standard - INFO - Using print time estimator provided by SlicerEstimator 2022-01-18 14:49:03,204 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2022-01-18 14:49:03,955 - octoprint.util.pip - INFO - Version of pip is 21.3.1 2022-01-18 14:49:03,957 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-01-18 14:49:03,957 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-01-18 14:49:04,061 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk 2022-01-18 14:49:04,150 - octoprint.plugins.firmwareupdater - INFO - Python binproto2 package installed: False 2022-01-18 14:49:04,183 - octoprint.plugin.core - INFO - Initialized 28 plugin implementation(s) 2022-01-18 14:49:04,193 - octoprint.plugin.core - INFO - 30 plugin(s) registered with the system: | Access Anywhere - The Spaghetti Detective (1.8.9) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_thespaghettidetective | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/appkeys | Backup & Restore (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/backup | Bed Visualizer (1.1.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_bedlevelvisualizer | Core Wizard (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/corewizard | Creality Temperature (1.2.4) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_CrealityTemperature | Creality-2x-temperature-reporting-fix (0.0.4) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_ender3v2tempfix | CuraEngine Legacy (1.1.2) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_curalegacy | Dashboard (1.19.6) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_dashboard | Discovery (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/discovery | !DisplayLayerProgress Plugin (1.27.2) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_DisplayLayerProgress | Error Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/errortracking | Event Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/eventmanager | File Check (2021.2.23) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_file_check | Firmware Check (2021.10.11) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmware_check | Firmware Updater (1.13.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmwareupdater | GCode Viewer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/gcodeviewer | Logging (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/logging | !Octolapse (0.4.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_octolapse | Pi Support Plugin (2021.10.28) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/pluginmanager | PrintTimeGenius Plugin (2.2.8) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_PrintTimeGenius | Slicer Estimator (1.2.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_SlicerEstimator | Software Update (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/softwareupdate | TouchUI (0.3.18) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_touchui | Virtual Printer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2022-01-18 14:49:04,218 - octoprint.environment - INFO - Detected environment is Python 3.9.2 under Linux (linux). Details: | hardware: | cores: 4 | freq: 1800.0 | ram: 1909063680 | os: | bits: 32 | id: linux | platform: linux | plugins: | pi_support: | model: Raspberry Pi 4 Model B Rev 1.5 | octopi_version: 1.0.0 | throttle_state: '0x0' | python: | pip: 21.3.1 | version: 3.9.2 | virtualenv: /home/pi/oprint 2022-01-18 14:49:04,226 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/webassets... 2022-01-18 14:49:04,239 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-cache... 2022-01-18 14:49:04,730 - octoprint.plugins.firmwareupdater - INFO - Setting maximum upload size for /flash to 5243904 2022-01-18 14:49:04,730 - octoprint.server - INFO - Shutting down intermediary server... 2022-01-18 14:49:04,731 - octoprint.server - INFO - Intermediary server shut down 2022-01-18 14:49:04,733 - octoprint.events - INFO - Processing startup event, this is our first event 2022-01-18 14:49:04,733 - octoprint.events - INFO - Adding 1 events to queue that were held back before startup event 2022-01-18 14:49:04,733 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue... 2022-01-18 14:49:04,736 - octoprint.server - INFO - Autoconnect on startup is configured, trying to connect to the printer... 2022-01-18 14:49:04,740 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue 2022-01-18 14:49:04,760 - octoprint.server - INFO - Trying to connect to configured serial port None 2022-01-18 14:49:04,783 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2022-01-18 14:49:04,787 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder... 2022-01-18 14:49:04,804 - octoprint.server.util.watchdog - INFO - ... initial scan done. 2022-01-18 14:49:04,818 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 7 port/baudrate candidates: /dev/ttyUSB0@115200, /dev/ttyUSB0@250000, /dev/ttyUSB0@230400, /dev/ttyUSB0@57600, /dev/ttyUSB0@38400, /dev/ttyUSB0@19200, /dev/ttyUSB0@9600 2022-01-18 14:49:04,819 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200 2022-01-18 14:49:04,819 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200 2022-01-18 14:49:04,840 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-18 14:49:04,843 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 14:49:04,850 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Operational" 2022-01-18 14:49:04,852 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 14:49:04,868 - octoprint.plugins.firmwareupdater - INFO - Got CONNECTED event 2022-01-18 14:49:04,869 - octoprint.plugins.firmwareupdater - INFO - Run postflash flag is not set 2022-01-18 14:49:04,900 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin CR-6 community firmware - release 6.1 (based on Marlin 2.0.8.1) (Jun 4 2021 16:53:51)" 2022-01-18 14:49:04,905 - octoprint.plugins.firmwareupdater - INFO - Setting BINARY_FILE_TRANSFER capability to False 2022-01-18 14:49:04,933 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting 2022-01-18 14:49:04,943 - octoprint.util.comm - INFO - Firmware states that it supports emergency GCODEs to be sent without waiting for an acknowledgement first 2022-01-18 14:49:05,633 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on raspberrypi._http._tcp.local.' for _http._tcp.local. 2022-01-18 14:49:06,451 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on raspberrypi._octoprint._tcp.local.' for _octoprint._tcp.local. 2022-01-18 14:49:06,515 - octoprint.plugins.curalegacy - INFO - Path to CuraEngine has not been configured or does not exist (currently set to None), Cura will not be selectable for slicing 2022-01-18 14:49:06,522 - octoprint.server - INFO - Listening on http://127.0.0.1:5000 2022-01-18 14:49:06,598 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2022-01-18 14:49:07,416 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2022-01-18 14:49:07,423 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-01-18 14:49:07,433 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-01-18 14:49:07,472 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 11.7GB. That is considered sufficient for updating. 2022-01-18 14:49:07,473 - octoprint.plugins.softwareupdate - INFO - Not fetching check overlays, we are offline 2022-01-18 14:49:07,617 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2022-01-18 14:49:50,068 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity changed from offline to online 2022-01-18 14:49:50,097 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2022-01-18 14:49:50,999 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2022-01-18 14:49:51,523 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 14:49:51,524 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 14:49:51,565 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2022-01-18 14:49:51,567 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-01-18 14:49:51,567 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-01-18 14:49:51,635 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk 2022-01-18 14:49:51,644 - octoprint.plugins.SlicerEstimator - INFO - Started up SlicerEstimator 2022-01-18 14:49:51,646 - octoprint.plugins.bedlevelvisualizer - INFO - OctoPrint-BedLevelVisualizer loaded! 2022-01-18 14:49:51,646 - octoprint.plugins.dashboard - INFO - Dashboard started 2022-01-18 14:49:51,648 - octoprint.JsFrontendErrors(Dash) - INFO - Js Logger (Dash) started 2022-01-18 14:49:51,801 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'http://192.168.1.76/', 'path': '/', 'query_string': 'l10n=en'} 2022-01-18 14:49:51,829 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 9, 'printer_state': 'OPERATIONAL'} 2022-01-18 14:49:52,038 - octoprint.plugins.tracking - INFO - Sent tracking event pong, payload: {'version': '1.7.2', 'os': 'linux', 'bits': 32, 'python': '3.9.2', 'pip': '21.3.1', 'cores': 4, 'freq': 1800.0, 'ram': 1909063680, 'pi_model': 'Raspberry Pi 4 Model B Rev 1.5', 'octopi_version': '1.0.0', 'plugins': 'touchui:0.3.18,thespaghettidetective:1.8.9,slicerestimator:1.2.0,printtimegenius:2.2.8,firmwareupdater:1.13.0,dashboard:1.19.6,curalegacy:1.1.2,crealitytemperature:1.2.4,ender3v2tempfix:0.0.4,bedlevelvisualizer:1.1.1'} 2022-01-18 14:49:52,088 - octoprint.plugins.thespaghettidetective - INFO - Linked printer: {'is_pro': True, 'id': 95565, 'name': 'My Awesome Cloud Printer'} 2022-01-18 14:49:52,139 - octoprint.plugins.thespaghettidetective - INFO - Starting webcam streamer 2022-01-18 14:49:52,361 - octoprint.plugins.tracking - INFO - Sent tracking event startup, payload: {'version': '1.7.2', 'os': 'linux', 'bits': 32, 'python': '3.9.2', 'pip': '21.3.1', 'cores': 4, 'freq': 1800.0, 'ram': 1909063680, 'pi_model': 'Raspberry Pi 4 Model B Rev 1.5', 'octopi_version': '1.0.0'} 2022-01-18 14:49:53,418 - backoff - INFO - Backing off wait_for_janus(...) for 0.3s (ConnectionRefusedError: [Errno 111] Connection refused) 2022-01-18 14:49:54,881 - octoprint.plugins.thespaghettidetective - WARNING - No camera detected. Skipping webcam streaming 2022-01-18 14:50:05,516 - octoprint.server.preemptive_cache - INFO - ... done in 13.71s 2022-01-18 14:50:06,274 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.71 2022-01-18 14:50:06,314 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 14:50:06,314 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 14:50:08,456 - octoprint.server.util.sockjs - INFO - User pi logged in on the socket from client ::ffff:192.168.1.71 2022-01-18 14:50:09,152 - octoprint.plugins.tracking - INFO - Sent tracking event webui_load, payload: {'browser_name': 'Chrome', 'browser_version': '97.0.4692.71', 'os_name': 'Windows', 'os_version': '10'} 2022-01-18 14:54:03,054 - octoprint.plugins.thespaghettidetective - WARNING - Server WS ERROR: Connection is already closed. 2022-01-18 14:54:03,055 - octoprint.plugins.thespaghettidetective - WARNING - WS Closed 2022-01-18 14:54:34,589 - octoprint.plugins.tracking - INFO - Sent tracking event disable_plugin, payload: {'plugin': 'touchui', 'plugin_version': '0.3.18'} 2022-01-18 14:54:50,663 - octoprint.plugins.tracking - INFO - Sent tracking event disable_plugin, payload: {'plugin': 'curalegacy', 'plugin_version': '1.1.2'} 2022-01-18 14:54:56,660 - octoprint.plugins.tracking - INFO - Sent tracking event disable_plugin, payload: {'plugin': 'ender3v2tempfix', 'plugin_version': '0.0.4'} 2022-01-18 14:54:58,134 - octoprint.plugins.tracking - INFO - Sent tracking event disable_plugin, payload: {'plugin': 'CrealityTemperature', 'plugin_version': '1.2.4'} 2022-01-18 14:55:01,471 - octoprint.plugins.tracking - INFO - Sent tracking event disable_plugin, payload: {'plugin': 'bedlevelvisualizer', 'plugin_version': '1.1.1'} 2022-01-18 14:55:12,455 - octoprint.server.api.system - INFO - Performing command for core:restart: sudo service octoprint restart 2022-01-18 14:56:43,680 - octoprint.startup - INFO - ****************************************************************************** 2022-01-18 14:56:43,681 - octoprint.startup - INFO - Starting OctoPrint 1.7.2 2022-01-18 14:56:43,682 - octoprint.startup - INFO - ****************************************************************************** 2022-01-18 14:56:43,969 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity changed from offline to online 2022-01-18 14:56:44,066 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: online 2022-01-18 14:56:44,067 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 8.8.8.8:53 is working 2022-01-18 14:56:44,067 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is working 2022-01-18 14:56:44,236 - octoprint.startup - INFO - Blacklist processing done, adding 3 blacklisted plugin versions: roomtemp (any), GcodeEditor (>=0.1.1,<=0.2.8), gcodeleveling (>=0.1.0,<=0.1.1) 2022-01-18 14:56:44,236 - octoprint.plugin.core - WARNING - Invalid version requirement >=0.1.1,<=0.2.8 for blacklist entry GcodeEditor, ignoring 2022-01-18 14:56:44,237 - octoprint.plugin.core - WARNING - Invalid version requirement >=0.1.0,<=0.1.1 for blacklist entry gcodeleveling, ignoring 2022-01-18 14:56:44,265 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2022-01-18 14:56:44,974 - octoprint.plugin.core - INFO - Plugin TouchUI (0.3.18) is disabled. 2022-01-18 14:56:45,197 - octoprint.plugin.core - INFO - Plugin CuraEngine Legacy (1.1.2) is disabled. 2022-01-18 14:56:45,203 - octoprint.plugin.core - INFO - Plugin Creality Temperature (1.2.4) is disabled. 2022-01-18 14:56:45,340 - octoprint.plugin.core - INFO - Plugin Octolapse (0.4.1) is disabled. 2022-01-18 14:56:45,378 - octoprint.plugin.core - INFO - Plugin DisplayLayerProgress Plugin (1.27.2) is disabled. 2022-01-18 14:56:45,384 - octoprint.plugin.core - INFO - Plugin Creality-2x-temperature-reporting-fix (0.0.4) is disabled. 2022-01-18 14:56:45,401 - octoprint.plugin.core - INFO - Plugin Bed Visualizer (1.1.1) is disabled. 2022-01-18 14:56:45,467 - octoprint.startup - INFO - Added settings overlay from plugin dashboard 2022-01-18 14:56:45,468 - octoprint.plugin.core - INFO - Found 30 plugin(s) providing 23 mixin implementations, 59 hook handlers 2022-01-18 14:56:45,530 - octoprint.server.heartbeat - INFO - Starting server heartbeat, 900.0s interval 2022-01-18 14:56:45,546 - octoprint.server - INFO - Intermediary server started 2022-01-18 14:56:45,559 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/pi/.octoprint/uploads... 2022-01-18 14:56:45,573 - octoprint.filemanager.storage - INFO - ... file metadata for /home/pi/.octoprint/uploads initialized successfully. 2022-01-18 14:56:45,576 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_SHOW (needs: "Need(method='role', value='plugin_action_command_notification_show')") 2022-01-18 14:56:45,576 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_CLEAR (needs: "Need(method='role', value='plugin_action_command_notification_clear')") 2022-01-18 14:56:45,577 - octoprint.server - INFO - Added new permission from plugin action_command_prompt: PLUGIN_ACTION_COMMAND_PROMPT_INTERACT (needs: "Need(method='role', value='plugin_action_command_prompt_interact')") 2022-01-18 14:56:45,577 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_READ (needs: "Need(method='role', value='plugin_announcements_read')") 2022-01-18 14:56:45,577 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_MANAGE (needs: "Need(method='role', value='plugin_announcements_manage'), Need(method='role', value='plugin_announcements_read')") 2022-01-18 14:56:45,578 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_ADMIN (needs: "Need(method='role', value='plugin_appkeys_admin')") 2022-01-18 14:56:45,578 - octoprint.server - INFO - Added new permission from plugin backup: PLUGIN_BACKUP_ACCESS (needs: "Need(method='role', value='plugin_backup_access')") 2022-01-18 14:56:45,578 - octoprint.server - INFO - Added new permission from plugin dashboard: PLUGIN_DASHBOARD_ADMIN (needs: "Need(method='role', value='plugin_dashboard_admin')") 2022-01-18 14:56:45,578 - octoprint.server - INFO - Added new permission from plugin firmware_check: PLUGIN_FIRMWARE_CHECK_DISPLAY (needs: "Need(method='role', value='plugin_firmware_check_display')") 2022-01-18 14:56:45,579 - octoprint.server - INFO - Added new permission from plugin logging: PLUGIN_LOGGING_MANAGE (needs: "Need(method='role', value='plugin_logging_manage')") 2022-01-18 14:56:45,579 - octoprint.server - INFO - Added new permission from plugin pi_support: PLUGIN_PI_SUPPORT_STATUS (needs: "Need(method='role', value='plugin_pi_support_check')") 2022-01-18 14:56:45,579 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_MANAGE (needs: "Need(method='role', value='plugin_pluginmanager_manage')") 2022-01-18 14:56:45,579 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_INSTALL (needs: "Need(method='role', value='plugin_pluginmanager_install'), Need(method='role', value='plugin_pluginmanager_manage')") 2022-01-18 14:56:45,580 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CHECK (needs: "Need(method='role', value='plugin_softwareupdate_check')") 2022-01-18 14:56:45,580 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_UPDATE (needs: "Need(method='role', value='plugin_softwareupdate_update')") 2022-01-18 14:56:45,580 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CONFIGURE (needs: "Need(method='role', value='plugin_softwareupdate_configure')") 2022-01-18 14:56:45,591 - octoprint.printer.standard - INFO - Using print time estimator provided by PrintTimeGenius 2022-01-18 14:56:45,592 - octoprint.printer.standard - INFO - Using print time estimator provided by SlicerEstimator 2022-01-18 14:56:46,333 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2022-01-18 14:56:47,081 - octoprint.util.pip - INFO - Version of pip is 21.3.1 2022-01-18 14:56:47,082 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-01-18 14:56:47,083 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-01-18 14:56:47,183 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk 2022-01-18 14:56:47,263 - octoprint.plugins.firmwareupdater - INFO - Python binproto2 package installed: False 2022-01-18 14:56:47,285 - octoprint.plugin.core - INFO - Initialized 23 plugin implementation(s) 2022-01-18 14:56:47,295 - octoprint.plugin.core - INFO - 30 plugin(s) registered with the system: | Access Anywhere - The Spaghetti Detective (1.8.9) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_thespaghettidetective | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/appkeys | Backup & Restore (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/backup | !Bed Visualizer (1.1.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_bedlevelvisualizer | Core Wizard (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/corewizard | !Creality Temperature (1.2.4) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_CrealityTemperature | !Creality-2x-temperature-reporting-fix (0.0.4) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_ender3v2tempfix | !CuraEngine Legacy (1.1.2) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_curalegacy | Dashboard (1.19.6) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_dashboard | Discovery (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/discovery | !DisplayLayerProgress Plugin (1.27.2) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_DisplayLayerProgress | Error Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/errortracking | Event Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/eventmanager | File Check (2021.2.23) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_file_check | Firmware Check (2021.10.11) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmware_check | Firmware Updater (1.13.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmwareupdater | GCode Viewer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/gcodeviewer | Logging (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/logging | !Octolapse (0.4.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_octolapse | Pi Support Plugin (2021.10.28) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/pluginmanager | PrintTimeGenius Plugin (2.2.8) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_PrintTimeGenius | Slicer Estimator (1.2.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_SlicerEstimator | Software Update (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/softwareupdate | !TouchUI (0.3.18) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_touchui | Virtual Printer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2022-01-18 14:56:47,316 - octoprint.environment - INFO - Detected environment is Python 3.9.2 under Linux (linux). Details: | hardware: | cores: 4 | freq: 1800.0 | ram: 1909063680 | os: | bits: 32 | id: linux | platform: linux | plugins: | pi_support: | model: Raspberry Pi 4 Model B Rev 1.5 | octopi_version: 1.0.0 | throttle_state: '0x0' | python: | pip: 21.3.1 | version: 3.9.2 | virtualenv: /home/pi/oprint 2022-01-18 14:56:47,329 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/webassets... 2022-01-18 14:56:47,351 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-cache... 2022-01-18 14:56:47,767 - octoprint.plugins.firmwareupdater - INFO - Setting maximum upload size for /flash to 5243904 2022-01-18 14:56:47,768 - octoprint.server - INFO - Shutting down intermediary server... 2022-01-18 14:56:47,917 - octoprint.server - INFO - Intermediary server shut down 2022-01-18 14:56:47,918 - octoprint.events - INFO - Processing startup event, this is our first event 2022-01-18 14:56:47,919 - octoprint.events - INFO - Adding 2 events to queue that were held back before startup event 2022-01-18 14:56:47,935 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue... 2022-01-18 14:56:47,936 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json 2022-01-18 14:56:47,937 - octoprint.server - INFO - Autoconnect on startup is configured, trying to connect to the printer... 2022-01-18 14:56:47,959 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2022-01-18 14:56:47,961 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue 2022-01-18 14:56:48,206 - octoprint.plugins.tracking - INFO - Sent tracking event system_unthrottled, payload: {'throttled_now': False, 'throttled_past': False, 'throttled_mask': 0, 'throttled_voltage_now': False, 'throttled_voltage_past': False, 'throttled_overheat_now': False, 'throttled_overheat_past': False} 2022-01-18 14:56:48,463 - octoprint.server - INFO - Trying to connect to configured serial port None 2022-01-18 14:56:48,596 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2022-01-18 14:56:48,641 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder... 2022-01-18 14:56:48,688 - octoprint.server.util.watchdog - INFO - ... initial scan done. 2022-01-18 14:56:48,694 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 7 port/baudrate candidates: /dev/ttyUSB0@115200, /dev/ttyUSB0@250000, /dev/ttyUSB0@230400, /dev/ttyUSB0@57600, /dev/ttyUSB0@38400, /dev/ttyUSB0@19200, /dev/ttyUSB0@9600 2022-01-18 14:56:48,694 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200 2022-01-18 14:56:48,694 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200 2022-01-18 14:56:48,818 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-18 14:56:48,826 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 14:56:48,876 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Operational" 2022-01-18 14:56:48,883 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 14:56:48,905 - octoprint.plugins.firmwareupdater - INFO - Got CONNECTED event 2022-01-18 14:56:48,906 - octoprint.plugins.firmwareupdater - INFO - Run postflash flag is not set 2022-01-18 14:56:48,992 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin CR-6 community firmware - release 6.1 (based on Marlin 2.0.8.1) (Jun 4 2021 16:53:51)" 2022-01-18 14:56:49,034 - octoprint.plugins.firmwareupdater - INFO - Setting BINARY_FILE_TRANSFER capability to False 2022-01-18 14:56:49,049 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting 2022-01-18 14:56:49,058 - octoprint.util.comm - INFO - Firmware states that it supports emergency GCODEs to be sent without waiting for an acknowledgement first 2022-01-18 14:56:49,120 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2022-01-18 14:56:49,192 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {'firmware_name': 'Marlin CR-6 community firmware - release 6.1 (based on Marlin 2.0.8.1) (Jun 4 2021 16:53:51)', 'printer_port': None, 'printer_baudrate': 0} 2022-01-18 14:56:49,584 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on raspberrypi._http._tcp.local.' for _http._tcp.local. 2022-01-18 14:56:49,913 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2022-01-18 14:56:49,915 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-01-18 14:56:49,915 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-01-18 14:56:49,974 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk 2022-01-18 14:56:50,429 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on raspberrypi._octoprint._tcp.local.' for _octoprint._tcp.local. 2022-01-18 14:56:50,438 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance on raspberrypi for SSDP 2022-01-18 14:56:50,491 - octoprint.server - INFO - Listening on http://127.0.0.1:5000 2022-01-18 14:56:50,585 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2022-01-18 14:56:51,391 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2022-01-18 14:56:51,397 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-01-18 14:56:51,403 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-01-18 14:56:51,406 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 11.7GB. That is considered sufficient for updating. 2022-01-18 14:56:51,544 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2022-01-18 14:56:51,577 - octoprint.plugins.SlicerEstimator - INFO - Started up SlicerEstimator 2022-01-18 14:56:51,579 - octoprint.plugins.dashboard - INFO - Dashboard started 2022-01-18 14:56:51,582 - octoprint.JsFrontendErrors(Dash) - INFO - Js Logger (Dash) started 2022-01-18 14:56:51,711 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'http://192.168.1.76/', 'path': '/', 'query_string': 'l10n=en'} 2022-01-18 14:56:51,758 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 6, 'printer_state': 'OPERATIONAL'} 2022-01-18 14:56:52,041 - octoprint.plugins.thespaghettidetective - INFO - Linked printer: {'is_pro': True, 'id': 95565, 'name': 'My Awesome Cloud Printer'} 2022-01-18 14:56:52,050 - octoprint.plugins.thespaghettidetective - INFO - Starting webcam streamer 2022-01-18 14:56:52,058 - octoprint.plugins.tracking - INFO - Sent tracking event pong, payload: {'version': '1.7.2', 'os': 'linux', 'bits': 32, 'python': '3.9.2', 'pip': '21.3.1', 'cores': 4, 'freq': 1800.0, 'ram': 1909063680, 'pi_model': 'Raspberry Pi 4 Model B Rev 1.5', 'octopi_version': '1.0.0', 'plugins': 'thespaghettidetective:1.8.9,slicerestimator:1.2.0,printtimegenius:2.2.8,firmwareupdater:1.13.0,dashboard:1.19.6'} 2022-01-18 14:56:52,307 - octoprint.plugins.tracking - INFO - Sent tracking event startup, payload: {'version': '1.7.2', 'os': 'linux', 'bits': 32, 'python': '3.9.2', 'pip': '21.3.1', 'cores': 4, 'freq': 1800.0, 'ram': 1909063680, 'pi_model': 'Raspberry Pi 4 Model B Rev 1.5', 'octopi_version': '1.0.0'} 2022-01-18 14:56:53,169 - backoff - INFO - Backing off wait_for_janus(...) for 0.5s (ConnectionRefusedError: [Errno 111] Connection refused) 2022-01-18 14:56:53,953 - octoprint.plugins.thespaghettidetective - WARNING - No camera detected. Skipping webcam streaming 2022-01-18 14:56:57,466 - octoprint.server.preemptive_cache - INFO - ... done in 5.76s 2022-01-18 14:56:57,911 - octoprint.server.views - INFO - Found path / in cache (key: ui:_default:http://192.168.1.76/:en), signaling as cached 2022-01-18 14:56:57,936 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 14:56:57,937 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 14:56:58,470 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.71 2022-01-18 14:56:58,554 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 14:56:58,554 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 14:57:00,476 - octoprint.server.util.sockjs - INFO - User pi logged in on the socket from client ::ffff:192.168.1.71 2022-01-18 14:57:01,165 - octoprint.plugins.tracking - INFO - Sent tracking event webui_load, payload: {'browser_name': 'Chrome', 'browser_version': '97.0.4692.71', 'os_name': 'Windows', 'os_version': '10'} 2022-01-18 14:57:29,489 - octoprint.printer.standard.job - INFO - Print job selected - origin: local, path: CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode, owner: pi, user: pi 2022-01-18 14:57:29,502 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting" 2022-01-18 14:57:29,511 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode, owner: pi, user: pi 2022-01-18 14:57:29,561 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 14:57:29,582 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Printing" 2022-01-18 14:57:29,593 - octoprint.plugins.SlicerEstimator - INFO - Detected Cura 2022-01-18 14:57:29,612 - octoprint.plugins.action_command_notification - INFO - Got a notification: Time Left 11h08m07s 2022-01-18 14:57:29,651 - octoprint.plugins.action_command_notification - INFO - Got a notification: Bed Heating... 2022-01-18 14:57:29,744 - octoprint.plugins.tracking - INFO - Sent tracking event print_started, payload: {'origin': 'local', 'file': '73da9fe1157f6619f8666e1b02fb2b0562c691db'} 2022-01-18 14:57:30,189 - backoff - INFO - Backing off capture_jpeg(...) for 0.7s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:57:30,934 - backoff - INFO - Backing off capture_jpeg(...) for 0.8s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:57:31,645 - octoprint.util.comm - INFO - Printer seems to support the busy protocol, will adjust timeouts and set busy interval accordingly 2022-01-18 14:57:31,704 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:57:40,734 - backoff - INFO - Backing off capture_jpeg(...) for 0.3s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:57:41,004 - backoff - INFO - Backing off capture_jpeg(...) for 1.5s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:57:42,553 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:57:42,995 - octoprint.plugins.action_command_notification - INFO - Got a notification: Printing... 2022-01-18 14:57:43,002 - octoprint.util.comm - INFO - Telling the printer to set the busy interval to our "communicationBusy" timeout - 1s = 2s 2022-01-18 14:57:51,585 - backoff - INFO - Backing off capture_jpeg(...) for 0.7s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:57:52,335 - backoff - INFO - Backing off capture_jpeg(...) for 1.2s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:57:53,548 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:57:56,379 - octoprint.plugins.action_command_notification - INFO - Got a notification: Printing... 2022-01-18 14:58:02,583 - backoff - INFO - Backing off capture_jpeg(...) for 0.5s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:58:03,046 - backoff - INFO - Backing off capture_jpeg(...) for 1.8s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:58:05,817 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:58:12,844 - backoff - INFO - Backing off capture_jpeg(...) for 0.9s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:58:13,712 - backoff - INFO - Backing off capture_jpeg(...) for 1.2s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:58:14,900 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:58:22,929 - backoff - INFO - Backing off capture_jpeg(...) for 0.4s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:58:23,327 - octoprint.plugins.action_command_notification - INFO - Got a notification: Waiting for heat-up... 2022-01-18 14:58:23,349 - backoff - INFO - Backing off capture_jpeg(...) for 0.8s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:58:24,123 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:58:33,154 - backoff - INFO - Backing off capture_jpeg(...) for 0.8s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:58:33,984 - backoff - INFO - Backing off capture_jpeg(...) for 1.1s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:58:35,065 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:58:44,097 - backoff - INFO - Backing off capture_jpeg(...) for 0.2s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:58:44,337 - backoff - INFO - Backing off capture_jpeg(...) for 0.4s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:58:44,743 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:58:54,843 - backoff - INFO - Backing off capture_jpeg(...) for 0.4s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:58:55,222 - backoff - INFO - Backing off capture_jpeg(...) for 0.0s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:58:55,272 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:59:02,057 - octoprint.plugins.thespaghettidetective - WARNING - Server WS ERROR: Connection is already closed. 2022-01-18 14:59:02,058 - octoprint.plugins.thespaghettidetective - WARNING - WS Closed 2022-01-18 14:59:03,603 - octoprint.plugins.action_command_notification - INFO - Got a notification: Printing... 2022-01-18 14:59:03,617 - octoprint.plugins.action_command_notification - INFO - Got a notification: Bed Heating... 2022-01-18 14:59:05,306 - backoff - INFO - Backing off capture_jpeg(...) for 0.6s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:59:05,941 - backoff - INFO - Backing off capture_jpeg(...) for 0.9s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:59:06,865 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:59:15,896 - backoff - INFO - Backing off capture_jpeg(...) for 0.3s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:59:16,247 - backoff - INFO - Backing off capture_jpeg(...) for 1.3s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:59:16,961 - octoprint.plugins.action_command_notification - INFO - Got a notification: Printing... 2022-01-18 14:59:16,972 - octoprint.plugins.action_command_notification - INFO - Got a notification: Printing... 2022-01-18 14:59:17,533 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:59:26,567 - backoff - INFO - Backing off capture_jpeg(...) for 0.4s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:59:26,931 - backoff - INFO - Backing off capture_jpeg(...) for 0.6s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:59:27,522 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 14:59:28,808 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 29, current line = 30 | Last lines in terminal: | Recv: T:245.00 /245.00 B:79.95 /80.00 @:82 B@:47 | Recv: echo:busy: processing | Recv: T:245.00 /245.00 B:79.96 /80.00 @:80 B@:46 | Recv: ok | Send: N24 G92 E0*113 | Recv: X:10.4000 Y:20.0000 Z:0.2800 E:0.0000 Count X:832 Y:13600 Z:183 | Recv: ok | Send: N25 G1 Z2.0 F3000*44 | Recv: ok | Send: N26 G92 E0*115 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13186 Z:188 | Recv: ok | Send: N27 G92 E0*114 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13152 Z:189 | Recv: ok | Send: N28 G1 F3000 E-6.5*18 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 2022-01-18 14:59:28,838 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 29, current line = 30 | Last lines in terminal: | Send: N24 G92 E0*113 | Recv: X:10.4000 Y:20.0000 Z:0.2800 E:0.0000 Count X:832 Y:13600 Z:183 | Recv: ok | Send: N25 G1 Z2.0 F3000*44 | Recv: ok | Send: N26 G92 E0*115 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13186 Z:188 | Recv: ok | Send: N27 G92 E0*114 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13152 Z:189 | Recv: ok | Send: N28 G1 F3000 E-6.5*18 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 2022-01-18 14:59:28,867 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 29, current line = 30 | Last lines in terminal: | Recv: ok | Send: N26 G92 E0*115 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13186 Z:188 | Recv: ok | Send: N27 G92 E0*114 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13152 Z:189 | Recv: ok | Send: N28 G1 F3000 E-6.5*18 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 2022-01-18 14:59:28,896 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 29, current line = 30 | Last lines in terminal: | Send: N27 G92 E0*114 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13152 Z:189 | Recv: ok | Send: N28 G1 F3000 E-6.5*18 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 2022-01-18 14:59:28,925 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 29, current line = 30 | Last lines in terminal: | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 2022-01-18 14:59:29,090 - octoprint.util.comm - WARNING - Printer keeps requesting line 29 again and again, communication stuck 2022-01-18 14:59:29,090 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Error" 2022-01-18 14:59:29,098 - octoprint.util.comm - INFO - Force-sending M112 to the printer 2022-01-18 14:59:29,153 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2022-01-18 14:59:29,178 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2022-01-18 14:59:29,343 - octoprint.plugins.tracking - INFO - Sent tracking event commerror_resend_loop, payload: {'commerror_text': 'Printer keeps requesting line 29 again and again, communication stuck'} 2022-01-18 14:59:29,507 - octoprint.plugins.tracking - INFO - Sent tracking event print_failed, payload: {'origin': 'local', 'file': '73da9fe1157f6619f8666e1b02fb2b0562c691db', 'elapsed': 119, 'reason': 'error', 'commerror_text': 'Printer keeps requesting line 29 again and again, communication stuck'} 2022-01-18 14:59:29,656 - octoprint.util.comm - INFO - Firmware didn't send an 'ok' with their resend request. That's a known bug with some firmware variants out there. Simulating an ok to continue... 2022-01-18 14:59:38,279 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.71 2022-01-18 14:59:38,313 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 14:59:38,314 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 14:59:38,352 - octoprint.server.util.sockjs - INFO - User pi logged in on the socket from client ::ffff:192.168.1.71 2022-01-18 14:59:40,168 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.71 2022-01-18 15:01:06,542 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Opening serial connection" 2022-01-18 15:01:06,544 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200 2022-01-18 15:01:06,575 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial connection" to "Connecting" 2022-01-18 15:01:06,584 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:01:36,622 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:01:46,635 - octoprint.util.comm - INFO - Changing monitoring state from "Connecting" to "Offline" 2022-01-18 15:01:46,648 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2022-01-18 15:02:17,647 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Opening serial connection" 2022-01-18 15:02:17,649 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200 2022-01-18 15:02:17,682 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial connection" to "Connecting" 2022-01-18 15:02:17,689 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:02:47,715 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:02:57,733 - octoprint.util.comm - INFO - Changing monitoring state from "Connecting" to "Offline" 2022-01-18 15:02:57,747 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2022-01-18 15:04:07,052 - octoprint.plugins.thespaghettidetective - WARNING - Server WS ERROR: [Errno 104] Connection reset by peer 2022-01-18 15:04:07,055 - octoprint.plugins.thespaghettidetective - WARNING - WS Closed 2022-01-18 15:04:15,375 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Opening serial connection" 2022-01-18 15:04:15,377 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200 2022-01-18 15:04:15,405 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial connection" to "Connecting" 2022-01-18 15:04:15,408 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:04:45,437 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:04:55,457 - octoprint.util.comm - INFO - Changing monitoring state from "Connecting" to "Offline" 2022-01-18 15:04:55,469 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2022-01-18 15:08:54,640 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Opening serial connection" 2022-01-18 15:08:54,642 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200 2022-01-18 15:08:54,683 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial connection" to "Connecting" 2022-01-18 15:08:54,688 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:09:00,110 - octoprint.server.api.system - INFO - Performing command for core:restart: sudo service octoprint restart 2022-01-18 15:10:31,149 - octoprint.startup - INFO - ****************************************************************************** 2022-01-18 15:10:31,151 - octoprint.startup - INFO - Starting OctoPrint 1.7.2 2022-01-18 15:10:31,152 - octoprint.startup - INFO - ****************************************************************************** 2022-01-18 15:10:31,435 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity changed from offline to online 2022-01-18 15:10:31,535 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: online 2022-01-18 15:10:31,535 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 8.8.8.8:53 is working 2022-01-18 15:10:31,536 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is working 2022-01-18 15:10:31,540 - octoprint.startup - INFO - Blacklist processing done, adding 3 blacklisted plugin versions: roomtemp (any), GcodeEditor (>=0.1.1,<=0.2.8), gcodeleveling (>=0.1.0,<=0.1.1) 2022-01-18 15:10:31,564 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2022-01-18 15:10:32,281 - octoprint.plugin.core - INFO - Plugin TouchUI (0.3.18) is disabled. 2022-01-18 15:10:32,502 - octoprint.plugin.core - INFO - Plugin CuraEngine Legacy (1.1.2) is disabled. 2022-01-18 15:10:32,507 - octoprint.plugin.core - INFO - Plugin Creality Temperature (1.2.4) is disabled. 2022-01-18 15:10:32,646 - octoprint.plugin.core - INFO - Plugin Octolapse (0.4.1) is disabled. 2022-01-18 15:10:32,684 - octoprint.plugin.core - INFO - Plugin DisplayLayerProgress Plugin (1.27.2) is disabled. 2022-01-18 15:10:32,689 - octoprint.plugin.core - INFO - Plugin Creality-2x-temperature-reporting-fix (0.0.4) is disabled. 2022-01-18 15:10:32,706 - octoprint.plugin.core - INFO - Plugin Bed Visualizer (1.1.1) is disabled. 2022-01-18 15:10:32,775 - octoprint.startup - INFO - Added settings overlay from plugin dashboard 2022-01-18 15:10:32,776 - octoprint.plugin.core - INFO - Found 30 plugin(s) providing 23 mixin implementations, 59 hook handlers 2022-01-18 15:10:32,836 - octoprint.server.heartbeat - INFO - Starting server heartbeat, 900.0s interval 2022-01-18 15:10:32,852 - octoprint.server - INFO - Intermediary server started 2022-01-18 15:10:32,864 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/pi/.octoprint/uploads... 2022-01-18 15:10:32,879 - octoprint.filemanager.storage - INFO - ... file metadata for /home/pi/.octoprint/uploads initialized successfully. 2022-01-18 15:10:32,881 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_SHOW (needs: "Need(method='role', value='plugin_action_command_notification_show')") 2022-01-18 15:10:32,882 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_CLEAR (needs: "Need(method='role', value='plugin_action_command_notification_clear')") 2022-01-18 15:10:32,882 - octoprint.server - INFO - Added new permission from plugin action_command_prompt: PLUGIN_ACTION_COMMAND_PROMPT_INTERACT (needs: "Need(method='role', value='plugin_action_command_prompt_interact')") 2022-01-18 15:10:32,882 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_READ (needs: "Need(method='role', value='plugin_announcements_read')") 2022-01-18 15:10:32,883 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_MANAGE (needs: "Need(method='role', value='plugin_announcements_manage'), Need(method='role', value='plugin_announcements_read')") 2022-01-18 15:10:32,883 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_ADMIN (needs: "Need(method='role', value='plugin_appkeys_admin')") 2022-01-18 15:10:32,883 - octoprint.server - INFO - Added new permission from plugin backup: PLUGIN_BACKUP_ACCESS (needs: "Need(method='role', value='plugin_backup_access')") 2022-01-18 15:10:32,883 - octoprint.server - INFO - Added new permission from plugin dashboard: PLUGIN_DASHBOARD_ADMIN (needs: "Need(method='role', value='plugin_dashboard_admin')") 2022-01-18 15:10:32,883 - octoprint.server - INFO - Added new permission from plugin firmware_check: PLUGIN_FIRMWARE_CHECK_DISPLAY (needs: "Need(method='role', value='plugin_firmware_check_display')") 2022-01-18 15:10:32,884 - octoprint.server - INFO - Added new permission from plugin logging: PLUGIN_LOGGING_MANAGE (needs: "Need(method='role', value='plugin_logging_manage')") 2022-01-18 15:10:32,884 - octoprint.server - INFO - Added new permission from plugin pi_support: PLUGIN_PI_SUPPORT_STATUS (needs: "Need(method='role', value='plugin_pi_support_check')") 2022-01-18 15:10:32,884 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_MANAGE (needs: "Need(method='role', value='plugin_pluginmanager_manage')") 2022-01-18 15:10:32,884 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_INSTALL (needs: "Need(method='role', value='plugin_pluginmanager_install'), Need(method='role', value='plugin_pluginmanager_manage')") 2022-01-18 15:10:32,885 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CHECK (needs: "Need(method='role', value='plugin_softwareupdate_check')") 2022-01-18 15:10:32,885 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_UPDATE (needs: "Need(method='role', value='plugin_softwareupdate_update')") 2022-01-18 15:10:32,885 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CONFIGURE (needs: "Need(method='role', value='plugin_softwareupdate_configure')") 2022-01-18 15:10:32,893 - octoprint.printer.standard - INFO - Using print time estimator provided by PrintTimeGenius 2022-01-18 15:10:32,894 - octoprint.printer.standard - INFO - Using print time estimator provided by SlicerEstimator 2022-01-18 15:10:33,640 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2022-01-18 15:10:34,376 - octoprint.util.pip - INFO - Version of pip is 21.3.1 2022-01-18 15:10:34,379 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-01-18 15:10:34,379 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-01-18 15:10:34,481 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk 2022-01-18 15:10:34,560 - octoprint.plugins.firmwareupdater - INFO - Python binproto2 package installed: False 2022-01-18 15:10:34,582 - octoprint.plugin.core - INFO - Initialized 23 plugin implementation(s) 2022-01-18 15:10:34,591 - octoprint.plugin.core - INFO - 30 plugin(s) registered with the system: | Access Anywhere - The Spaghetti Detective (1.8.9) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_thespaghettidetective | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/appkeys | Backup & Restore (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/backup | !Bed Visualizer (1.1.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_bedlevelvisualizer | Core Wizard (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/corewizard | !Creality Temperature (1.2.4) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_CrealityTemperature | !Creality-2x-temperature-reporting-fix (0.0.4) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_ender3v2tempfix | !CuraEngine Legacy (1.1.2) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_curalegacy | Dashboard (1.19.6) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_dashboard | Discovery (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/discovery | !DisplayLayerProgress Plugin (1.27.2) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_DisplayLayerProgress | Error Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/errortracking | Event Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/eventmanager | File Check (2021.2.23) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_file_check | Firmware Check (2021.10.11) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmware_check | Firmware Updater (1.13.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmwareupdater | GCode Viewer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/gcodeviewer | Logging (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/logging | !Octolapse (0.4.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_octolapse | Pi Support Plugin (2021.10.28) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/pluginmanager | PrintTimeGenius Plugin (2.2.8) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_PrintTimeGenius | Slicer Estimator (1.2.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_SlicerEstimator | Software Update (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/softwareupdate | !TouchUI (0.3.18) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_touchui | Virtual Printer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2022-01-18 15:10:34,613 - octoprint.environment - INFO - Detected environment is Python 3.9.2 under Linux (linux). Details: | hardware: | cores: 4 | freq: 1800.0 | ram: 1909063680 | os: | bits: 32 | id: linux | platform: linux | plugins: | pi_support: | model: Raspberry Pi 4 Model B Rev 1.5 | octopi_version: 1.0.0 | throttle_state: '0x0' | python: | pip: 21.3.1 | version: 3.9.2 | virtualenv: /home/pi/oprint 2022-01-18 15:10:34,623 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/webassets... 2022-01-18 15:10:34,640 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-cache... 2022-01-18 15:10:35,050 - octoprint.plugins.firmwareupdater - INFO - Setting maximum upload size for /flash to 5243904 2022-01-18 15:10:35,050 - octoprint.server - INFO - Shutting down intermediary server... 2022-01-18 15:10:35,398 - octoprint.server - INFO - Intermediary server shut down 2022-01-18 15:10:35,400 - octoprint.events - INFO - Processing startup event, this is our first event 2022-01-18 15:10:35,400 - octoprint.events - INFO - Adding 2 events to queue that were held back before startup event 2022-01-18 15:10:35,401 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue... 2022-01-18 15:10:35,405 - octoprint.server - INFO - Autoconnect on startup is configured, trying to connect to the printer... 2022-01-18 15:10:35,418 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json 2022-01-18 15:10:35,429 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue 2022-01-18 15:10:35,446 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2022-01-18 15:10:35,752 - octoprint.plugins.tracking - INFO - Sent tracking event system_unthrottled, payload: {'throttled_now': False, 'throttled_past': False, 'throttled_mask': 0, 'throttled_voltage_now': False, 'throttled_voltage_past': False, 'throttled_overheat_now': False, 'throttled_overheat_past': False} 2022-01-18 15:10:36,064 - octoprint.server - INFO - Trying to connect to configured serial port None 2022-01-18 15:10:36,220 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2022-01-18 15:10:36,294 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder... 2022-01-18 15:10:36,326 - octoprint.server.util.watchdog - INFO - ... initial scan done. 2022-01-18 15:10:36,482 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2022-01-18 15:10:36,492 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 7 port/baudrate candidates: /dev/ttyUSB0@115200, /dev/ttyUSB0@250000, /dev/ttyUSB0@230400, /dev/ttyUSB0@57600, /dev/ttyUSB0@38400, /dev/ttyUSB0@19200, /dev/ttyUSB0@9600 2022-01-18 15:10:36,492 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200 2022-01-18 15:10:36,492 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200 2022-01-18 15:10:36,508 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-18 15:10:36,510 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:10:37,203 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on raspberrypi._http._tcp.local.' for _http._tcp.local. 2022-01-18 15:10:38,024 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on raspberrypi._octoprint._tcp.local.' for _octoprint._tcp.local. 2022-01-18 15:10:38,051 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance on raspberrypi for SSDP 2022-01-18 15:10:38,077 - octoprint.server - INFO - Listening on http://127.0.0.1:5000 2022-01-18 15:10:38,169 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2022-01-18 15:10:38,204 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.71 2022-01-18 15:10:38,421 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 15:10:38,422 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 15:10:38,526 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2022-01-18 15:10:38,568 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:10:38,736 - octoprint.server.util.sockjs - INFO - User pi logged in on the socket from client ::ffff:192.168.1.71 2022-01-18 15:10:38,983 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2022-01-18 15:10:38,983 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-01-18 15:10:38,983 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-01-18 15:10:38,988 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 11.6GB. That is considered sufficient for updating. 2022-01-18 15:10:39,346 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2022-01-18 15:10:39,564 - octoprint.plugins.SlicerEstimator - INFO - Started up SlicerEstimator 2022-01-18 15:10:39,566 - octoprint.plugins.dashboard - INFO - Dashboard started 2022-01-18 15:10:39,568 - octoprint.JsFrontendErrors(Dash) - INFO - Js Logger (Dash) started 2022-01-18 15:10:39,740 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 7, 'printer_state': 'DETECT_SERIAL'} 2022-01-18 15:10:39,784 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'http://192.168.1.76/', 'path': '/', 'query_string': 'l10n=en'} 2022-01-18 15:10:40,009 - octoprint.plugins.tracking - INFO - Sent tracking event pong, payload: {'version': '1.7.2', 'os': 'linux', 'bits': 32, 'python': '3.9.2', 'pip': '21.3.1', 'cores': 4, 'freq': 1800.0, 'ram': 1909063680, 'pi_model': 'Raspberry Pi 4 Model B Rev 1.5', 'octopi_version': '1.0.0', 'plugins': 'thespaghettidetective:1.8.9,slicerestimator:1.2.0,printtimegenius:2.2.8,firmwareupdater:1.13.0,dashboard:1.19.6'} 2022-01-18 15:10:40,068 - octoprint.plugins.thespaghettidetective - INFO - Linked printer: {'is_pro': True, 'id': 95565, 'name': 'My Awesome Cloud Printer'} 2022-01-18 15:10:40,077 - octoprint.plugins.thespaghettidetective - INFO - Starting webcam streamer 2022-01-18 15:10:40,542 - octoprint.plugins.tracking - INFO - Sent tracking event startup, payload: {'version': '1.7.2', 'os': 'linux', 'bits': 32, 'python': '3.9.2', 'pip': '21.3.1', 'cores': 4, 'freq': 1800.0, 'ram': 1909063680, 'pi_model': 'Raspberry Pi 4 Model B Rev 1.5', 'octopi_version': '1.0.0'} 2022-01-18 15:10:40,566 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2022-01-18 15:10:40,572 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:10:41,418 - backoff - INFO - Backing off wait_for_janus(...) for 0.5s (ConnectionRefusedError: [Errno 111] Connection refused) 2022-01-18 15:10:42,352 - octoprint.plugins.thespaghettidetective - WARNING - No camera detected. Skipping webcam streaming 2022-01-18 15:10:42,570 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 250000 2022-01-18 15:10:42,577 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-18 15:10:42,579 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:10:44,592 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2022-01-18 15:10:44,610 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:10:45,898 - octoprint.server.preemptive_cache - INFO - ... done in 6.11s 2022-01-18 15:10:46,602 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2022-01-18 15:10:46,605 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:10:48,609 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 230400 2022-01-18 15:10:48,612 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-18 15:10:48,621 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:10:50,626 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2022-01-18 15:10:50,633 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:10:52,633 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2022-01-18 15:10:52,641 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:10:54,645 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 57600 2022-01-18 15:10:54,648 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-18 15:10:54,656 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:10:56,659 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2022-01-18 15:10:56,666 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:10:58,670 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2022-01-18 15:10:58,677 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:11:00,681 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 38400 2022-01-18 15:11:00,684 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-18 15:11:00,692 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:11:02,695 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2022-01-18 15:11:02,701 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:11:04,704 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2022-01-18 15:11:04,712 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:11:06,715 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 19200 2022-01-18 15:11:06,718 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-18 15:11:06,726 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:11:08,730 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2022-01-18 15:11:08,737 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:11:10,738 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2022-01-18 15:11:10,745 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:11:12,747 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 9600 2022-01-18 15:11:12,750 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-18 15:11:12,758 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:11:14,760 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2022-01-18 15:11:14,768 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:11:16,769 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2022-01-18 15:11:16,776 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:11:18,777 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Error" 2022-01-18 15:11:18,791 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2022-01-18 15:11:18,873 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2022-01-18 15:11:19,043 - octoprint.plugins.tracking - INFO - Sent tracking event commerror_autodetect, payload: {'commerror_text': 'No more candidates to test, and no working port/baudrate combination detected.'} 2022-01-18 15:12:34,498 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 15:12:34,499 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 15:12:34,616 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.71 2022-01-18 15:12:35,058 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.71 2022-01-18 15:12:35,098 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 15:12:35,098 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 15:12:37,372 - octoprint.server.util.sockjs - INFO - User pi logged in on the socket from client ::ffff:192.168.1.71 2022-01-18 15:12:38,018 - octoprint.plugins.tracking - INFO - Sent tracking event webui_load, payload: {'browser_name': 'Chrome', 'browser_version': '97.0.4692.71', 'os_name': 'Windows', 'os_version': '10'} 2022-01-18 15:12:41,515 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2022-01-18 15:12:41,567 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 7 port/baudrate candidates: /dev/ttyUSB0@115200, /dev/ttyUSB0@250000, /dev/ttyUSB0@230400, /dev/ttyUSB0@57600, /dev/ttyUSB0@38400, /dev/ttyUSB0@19200, /dev/ttyUSB0@9600 2022-01-18 15:12:41,567 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200 2022-01-18 15:12:41,567 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200 2022-01-18 15:12:41,644 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-18 15:12:41,651 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:12:43,655 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2022-01-18 15:12:43,664 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:12:45,665 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2022-01-18 15:12:45,670 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:12:47,674 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 250000 2022-01-18 15:12:47,683 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-18 15:12:47,687 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:12:49,693 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2022-01-18 15:12:49,701 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:12:51,702 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2022-01-18 15:12:51,710 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:12:53,711 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 230400 2022-01-18 15:12:53,715 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-18 15:12:53,723 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:12:55,729 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2022-01-18 15:12:55,737 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:12:57,740 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2022-01-18 15:12:57,748 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:12:59,752 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 57600 2022-01-18 15:12:59,755 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-18 15:12:59,763 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:13:01,766 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2022-01-18 15:13:01,774 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:13:03,782 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2022-01-18 15:13:03,789 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:13:05,792 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 38400 2022-01-18 15:13:05,796 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-18 15:13:05,803 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:13:07,807 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2022-01-18 15:13:07,815 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:13:09,819 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2022-01-18 15:13:09,825 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:13:11,829 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 19200 2022-01-18 15:13:11,833 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-18 15:13:11,841 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:13:13,846 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2022-01-18 15:13:13,854 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:13:15,859 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2022-01-18 15:13:15,865 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:13:17,867 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 9600 2022-01-18 15:13:17,870 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-18 15:13:17,878 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:13:19,881 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2022-01-18 15:13:19,889 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:13:21,890 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2022-01-18 15:13:21,896 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:13:23,898 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Error" 2022-01-18 15:13:23,947 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2022-01-18 15:13:23,992 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2022-01-18 15:13:46,821 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 15:13:46,822 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 15:13:46,910 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.71 2022-01-18 15:13:47,344 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.71 2022-01-18 15:13:47,559 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 15:13:47,559 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 15:13:49,553 - octoprint.server.util.sockjs - INFO - User pi logged in on the socket from client ::ffff:192.168.1.71 2022-01-18 15:13:50,241 - octoprint.plugins.tracking - INFO - Sent tracking event webui_load, payload: {'browser_name': 'Chrome', 'browser_version': '97.0.4692.71', 'os_name': 'Windows', 'os_version': '10'} 2022-01-18 15:13:54,703 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2022-01-18 15:13:54,756 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 7 port/baudrate candidates: /dev/ttyUSB0@115200, /dev/ttyUSB0@250000, /dev/ttyUSB0@230400, /dev/ttyUSB0@57600, /dev/ttyUSB0@38400, /dev/ttyUSB0@19200, /dev/ttyUSB0@9600 2022-01-18 15:13:54,756 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200 2022-01-18 15:13:54,757 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200 2022-01-18 15:13:54,845 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-18 15:13:54,862 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:13:56,857 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2022-01-18 15:13:56,863 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:13:58,866 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2022-01-18 15:13:58,874 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:14:00,877 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 250000 2022-01-18 15:14:00,885 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-18 15:14:00,890 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:14:02,893 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2022-01-18 15:14:02,901 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:14:04,903 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2022-01-18 15:14:04,911 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:14:06,914 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 230400 2022-01-18 15:14:06,918 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-18 15:14:06,924 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:14:08,924 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2022-01-18 15:14:08,932 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:14:10,935 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2022-01-18 15:14:10,941 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:14:12,945 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 57600 2022-01-18 15:14:12,949 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-18 15:14:12,956 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:14:13,202 - octoprint.server.api.system - INFO - Performing command for core:restart: sudo service octoprint restart 2022-01-18 15:15:44,428 - octoprint.startup - INFO - ****************************************************************************** 2022-01-18 15:15:44,430 - octoprint.startup - INFO - Starting OctoPrint 1.7.2 2022-01-18 15:15:44,430 - octoprint.startup - INFO - ****************************************************************************** 2022-01-18 15:15:44,715 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity changed from offline to online 2022-01-18 15:15:44,808 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: online 2022-01-18 15:15:44,808 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 8.8.8.8:53 is working 2022-01-18 15:15:44,809 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is working 2022-01-18 15:15:45,007 - octoprint.startup - INFO - Blacklist processing done, adding 3 blacklisted plugin versions: roomtemp (any), GcodeEditor (>=0.1.1,<=0.2.8), gcodeleveling (>=0.1.0,<=0.1.1) 2022-01-18 15:15:45,007 - octoprint.plugin.core - WARNING - Invalid version requirement >=0.1.1,<=0.2.8 for blacklist entry GcodeEditor, ignoring 2022-01-18 15:15:45,008 - octoprint.plugin.core - WARNING - Invalid version requirement >=0.1.0,<=0.1.1 for blacklist entry gcodeleveling, ignoring 2022-01-18 15:15:45,036 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2022-01-18 15:15:45,769 - octoprint.plugin.core - INFO - Plugin TouchUI (0.3.18) is disabled. 2022-01-18 15:15:45,991 - octoprint.plugin.core - INFO - Plugin CuraEngine Legacy (1.1.2) is disabled. 2022-01-18 15:15:45,996 - octoprint.plugin.core - INFO - Plugin Creality Temperature (1.2.4) is disabled. 2022-01-18 15:15:46,134 - octoprint.plugin.core - INFO - Plugin Octolapse (0.4.1) is disabled. 2022-01-18 15:15:46,172 - octoprint.plugin.core - INFO - Plugin DisplayLayerProgress Plugin (1.27.2) is disabled. 2022-01-18 15:15:46,178 - octoprint.plugin.core - INFO - Plugin Creality-2x-temperature-reporting-fix (0.0.4) is disabled. 2022-01-18 15:15:46,195 - octoprint.plugin.core - INFO - Plugin Bed Visualizer (1.1.1) is disabled. 2022-01-18 15:15:46,261 - octoprint.startup - INFO - Added settings overlay from plugin dashboard 2022-01-18 15:15:46,261 - octoprint.plugin.core - INFO - Found 30 plugin(s) providing 23 mixin implementations, 59 hook handlers 2022-01-18 15:15:46,322 - octoprint.server.heartbeat - INFO - Starting server heartbeat, 900.0s interval 2022-01-18 15:15:46,338 - octoprint.server - INFO - Intermediary server started 2022-01-18 15:15:46,350 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/pi/.octoprint/uploads... 2022-01-18 15:15:46,365 - octoprint.filemanager.storage - INFO - ... file metadata for /home/pi/.octoprint/uploads initialized successfully. 2022-01-18 15:15:46,367 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_SHOW (needs: "Need(method='role', value='plugin_action_command_notification_show')") 2022-01-18 15:15:46,368 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_CLEAR (needs: "Need(method='role', value='plugin_action_command_notification_clear')") 2022-01-18 15:15:46,368 - octoprint.server - INFO - Added new permission from plugin action_command_prompt: PLUGIN_ACTION_COMMAND_PROMPT_INTERACT (needs: "Need(method='role', value='plugin_action_command_prompt_interact')") 2022-01-18 15:15:46,368 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_READ (needs: "Need(method='role', value='plugin_announcements_read')") 2022-01-18 15:15:46,369 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_MANAGE (needs: "Need(method='role', value='plugin_announcements_manage'), Need(method='role', value='plugin_announcements_read')") 2022-01-18 15:15:46,369 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_ADMIN (needs: "Need(method='role', value='plugin_appkeys_admin')") 2022-01-18 15:15:46,369 - octoprint.server - INFO - Added new permission from plugin backup: PLUGIN_BACKUP_ACCESS (needs: "Need(method='role', value='plugin_backup_access')") 2022-01-18 15:15:46,369 - octoprint.server - INFO - Added new permission from plugin dashboard: PLUGIN_DASHBOARD_ADMIN (needs: "Need(method='role', value='plugin_dashboard_admin')") 2022-01-18 15:15:46,370 - octoprint.server - INFO - Added new permission from plugin firmware_check: PLUGIN_FIRMWARE_CHECK_DISPLAY (needs: "Need(method='role', value='plugin_firmware_check_display')") 2022-01-18 15:15:46,370 - octoprint.server - INFO - Added new permission from plugin logging: PLUGIN_LOGGING_MANAGE (needs: "Need(method='role', value='plugin_logging_manage')") 2022-01-18 15:15:46,370 - octoprint.server - INFO - Added new permission from plugin pi_support: PLUGIN_PI_SUPPORT_STATUS (needs: "Need(method='role', value='plugin_pi_support_check')") 2022-01-18 15:15:46,370 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_MANAGE (needs: "Need(method='role', value='plugin_pluginmanager_manage')") 2022-01-18 15:15:46,370 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_INSTALL (needs: "Need(method='role', value='plugin_pluginmanager_manage'), Need(method='role', value='plugin_pluginmanager_install')") 2022-01-18 15:15:46,371 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CHECK (needs: "Need(method='role', value='plugin_softwareupdate_check')") 2022-01-18 15:15:46,371 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_UPDATE (needs: "Need(method='role', value='plugin_softwareupdate_update')") 2022-01-18 15:15:46,371 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CONFIGURE (needs: "Need(method='role', value='plugin_softwareupdate_configure')") 2022-01-18 15:15:46,379 - octoprint.printer.standard - INFO - Using print time estimator provided by PrintTimeGenius 2022-01-18 15:15:46,379 - octoprint.printer.standard - INFO - Using print time estimator provided by SlicerEstimator 2022-01-18 15:15:47,133 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2022-01-18 15:15:47,864 - octoprint.util.pip - INFO - Version of pip is 21.3.1 2022-01-18 15:15:47,865 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-01-18 15:15:47,865 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-01-18 15:15:47,965 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk 2022-01-18 15:15:48,045 - octoprint.plugins.firmwareupdater - INFO - Python binproto2 package installed: False 2022-01-18 15:15:48,066 - octoprint.plugin.core - INFO - Initialized 23 plugin implementation(s) 2022-01-18 15:15:48,076 - octoprint.plugin.core - INFO - 30 plugin(s) registered with the system: | Access Anywhere - The Spaghetti Detective (1.8.9) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_thespaghettidetective | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/appkeys | Backup & Restore (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/backup | !Bed Visualizer (1.1.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_bedlevelvisualizer | Core Wizard (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/corewizard | !Creality Temperature (1.2.4) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_CrealityTemperature | !Creality-2x-temperature-reporting-fix (0.0.4) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_ender3v2tempfix | !CuraEngine Legacy (1.1.2) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_curalegacy | Dashboard (1.19.6) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_dashboard | Discovery (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/discovery | !DisplayLayerProgress Plugin (1.27.2) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_DisplayLayerProgress | Error Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/errortracking | Event Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/eventmanager | File Check (2021.2.23) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_file_check | Firmware Check (2021.10.11) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmware_check | Firmware Updater (1.13.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmwareupdater | GCode Viewer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/gcodeviewer | Logging (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/logging | !Octolapse (0.4.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_octolapse | Pi Support Plugin (2021.10.28) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/pluginmanager | PrintTimeGenius Plugin (2.2.8) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_PrintTimeGenius | Slicer Estimator (1.2.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_SlicerEstimator | Software Update (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/softwareupdate | !TouchUI (0.3.18) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_touchui | Virtual Printer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2022-01-18 15:15:48,098 - octoprint.environment - INFO - Detected environment is Python 3.9.2 under Linux (linux). Details: | hardware: | cores: 4 | freq: 1800.0 | ram: 1909063680 | os: | bits: 32 | id: linux | platform: linux | plugins: | pi_support: | model: Raspberry Pi 4 Model B Rev 1.5 | octopi_version: 1.0.0 | throttle_state: '0x0' | python: | pip: 21.3.1 | version: 3.9.2 | virtualenv: /home/pi/oprint 2022-01-18 15:15:48,108 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/webassets... 2022-01-18 15:15:48,125 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-cache... 2022-01-18 15:15:48,545 - octoprint.plugins.firmwareupdater - INFO - Setting maximum upload size for /flash to 5243904 2022-01-18 15:15:48,545 - octoprint.server - INFO - Shutting down intermediary server... 2022-01-18 15:15:48,740 - octoprint.server - INFO - Intermediary server shut down 2022-01-18 15:15:48,742 - octoprint.events - INFO - Processing startup event, this is our first event 2022-01-18 15:15:48,743 - octoprint.events - INFO - Adding 2 events to queue that were held back before startup event 2022-01-18 15:15:48,748 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue... 2022-01-18 15:15:48,748 - octoprint.server - INFO - Autoconnect on startup is configured, trying to connect to the printer... 2022-01-18 15:15:48,769 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json 2022-01-18 15:15:48,779 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue 2022-01-18 15:15:48,847 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2022-01-18 15:15:49,121 - octoprint.plugins.tracking - INFO - Sent tracking event system_unthrottled, payload: {'throttled_now': False, 'throttled_past': False, 'throttled_mask': 0, 'throttled_voltage_now': False, 'throttled_voltage_past': False, 'throttled_overheat_now': False, 'throttled_overheat_past': False} 2022-01-18 15:15:49,197 - octoprint.server - INFO - Trying to connect to configured serial port None 2022-01-18 15:15:49,307 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2022-01-18 15:15:49,425 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder... 2022-01-18 15:15:49,456 - octoprint.server.util.watchdog - INFO - ... initial scan done. 2022-01-18 15:15:49,674 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 7 port/baudrate candidates: /dev/ttyUSB0@115200, /dev/ttyUSB0@250000, /dev/ttyUSB0@230400, /dev/ttyUSB0@57600, /dev/ttyUSB0@38400, /dev/ttyUSB0@19200, /dev/ttyUSB0@9600 2022-01-18 15:15:49,675 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200 2022-01-18 15:15:49,675 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200 2022-01-18 15:15:49,782 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-18 15:15:49,791 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:15:49,962 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2022-01-18 15:15:50,415 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on raspberrypi._http._tcp.local.' for _http._tcp.local. 2022-01-18 15:15:51,229 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on raspberrypi._octoprint._tcp.local.' for _octoprint._tcp.local. 2022-01-18 15:15:51,255 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance on raspberrypi for SSDP 2022-01-18 15:15:51,291 - octoprint.server - INFO - Listening on http://127.0.0.1:5000 2022-01-18 15:15:51,394 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2022-01-18 15:15:51,799 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2022-01-18 15:15:51,815 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:15:52,196 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2022-01-18 15:15:52,202 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-01-18 15:15:52,202 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-01-18 15:15:52,242 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 11.6GB. That is considered sufficient for updating. 2022-01-18 15:15:52,356 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2022-01-18 15:15:52,404 - octoprint.plugins.SlicerEstimator - INFO - Started up SlicerEstimator 2022-01-18 15:15:52,406 - octoprint.plugins.dashboard - INFO - Dashboard started 2022-01-18 15:15:52,409 - octoprint.JsFrontendErrors(Dash) - INFO - Js Logger (Dash) started 2022-01-18 15:15:52,570 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'http://192.168.1.76/', 'path': '/', 'query_string': 'l10n=en'} 2022-01-18 15:15:52,777 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 6, 'printer_state': 'DETECT_SERIAL'} 2022-01-18 15:15:53,002 - octoprint.plugins.thespaghettidetective - INFO - Linked printer: {'is_pro': True, 'id': 95565, 'name': 'My Awesome Cloud Printer'} 2022-01-18 15:15:53,024 - octoprint.plugins.tracking - INFO - Sent tracking event pong, payload: {'version': '1.7.2', 'os': 'linux', 'bits': 32, 'python': '3.9.2', 'pip': '21.3.1', 'cores': 4, 'freq': 1800.0, 'ram': 1909063680, 'pi_model': 'Raspberry Pi 4 Model B Rev 1.5', 'octopi_version': '1.0.0', 'plugins': 'thespaghettidetective:1.8.9,slicerestimator:1.2.0,printtimegenius:2.2.8,firmwareupdater:1.13.0,dashboard:1.19.6'} 2022-01-18 15:15:53,028 - octoprint.plugins.thespaghettidetective - INFO - Starting webcam streamer 2022-01-18 15:15:53,252 - octoprint.plugins.tracking - INFO - Sent tracking event startup, payload: {'version': '1.7.2', 'os': 'linux', 'bits': 32, 'python': '3.9.2', 'pip': '21.3.1', 'cores': 4, 'freq': 1800.0, 'ram': 1909063680, 'pi_model': 'Raspberry Pi 4 Model B Rev 1.5', 'octopi_version': '1.0.0'} 2022-01-18 15:15:53,810 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2022-01-18 15:15:53,829 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:15:54,146 - backoff - INFO - Backing off wait_for_janus(...) for 0.9s (ConnectionRefusedError: [Errno 111] Connection refused) 2022-01-18 15:15:54,831 - octoprint.plugins.thespaghettidetective - WARNING - No camera detected. Skipping webcam streaming 2022-01-18 15:15:55,816 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 250000 2022-01-18 15:15:55,821 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-18 15:15:55,822 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:15:56,018 - backoff - INFO - Backing off wait_for_janus(...) for 0.1s (ConnectionRefusedError: [Errno 111] Connection refused) 2022-01-18 15:15:57,113 - backoff - INFO - Backing off wait_for_janus(...) for 0.8s (ConnectionRefusedError: [Errno 111] Connection refused) 2022-01-18 15:15:57,830 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2022-01-18 15:15:57,852 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:15:58,176 - octoprint.server.preemptive_cache - INFO - ... done in 5.61s 2022-01-18 15:15:58,670 - octoprint.server.views - INFO - Found path / in cache (key: ui:_default:http://192.168.1.76/:en), signaling as cached 2022-01-18 15:15:58,690 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 15:15:58,691 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 15:15:59,388 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.71 2022-01-18 15:15:59,455 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 15:15:59,455 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 15:15:59,845 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2022-01-18 15:15:59,846 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:16:01,369 - octoprint.server.util.sockjs - INFO - User pi logged in on the socket from client ::ffff:192.168.1.71 2022-01-18 15:16:01,849 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 230400 2022-01-18 15:16:01,852 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-18 15:16:01,856 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:16:02,057 - octoprint.plugins.tracking - INFO - Sent tracking event webui_load, payload: {'browser_name': 'Chrome', 'browser_version': '97.0.4692.71', 'os_name': 'Windows', 'os_version': '10'} 2022-01-18 15:16:03,860 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2022-01-18 15:16:03,866 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:16:05,872 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2022-01-18 15:16:05,878 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:16:07,886 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 57600 2022-01-18 15:16:07,890 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-18 15:16:07,894 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:16:09,897 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2022-01-18 15:16:09,906 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:16:11,909 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2022-01-18 15:16:11,917 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:16:13,920 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 38400 2022-01-18 15:16:13,923 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-18 15:16:13,930 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:16:15,935 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2022-01-18 15:16:15,944 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:16:17,948 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2022-01-18 15:16:17,956 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:16:19,959 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 19200 2022-01-18 15:16:19,963 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-18 15:16:19,972 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:16:21,980 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2022-01-18 15:16:21,988 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:16:23,988 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2022-01-18 15:16:23,996 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:16:25,996 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 9600 2022-01-18 15:16:26,000 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-18 15:16:26,008 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:16:28,006 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2022-01-18 15:16:28,012 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:16:30,014 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2022-01-18 15:16:30,021 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 15:16:32,023 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Error" 2022-01-18 15:16:32,071 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2022-01-18 15:16:32,107 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2022-01-18 15:16:32,277 - octoprint.plugins.tracking - INFO - Sent tracking event commerror_autodetect, payload: {'commerror_text': 'No more candidates to test, and no working port/baudrate combination detected.'} 2022-01-18 15:18:52,814 - octoprint.plugins.thespaghettidetective - WARNING - Server WS ERROR: [Errno 104] Connection reset by peer 2022-01-18 15:18:52,820 - octoprint.plugins.thespaghettidetective - WARNING - WS Closed 2022-01-18 15:23:47,227 - octoprint.plugins.thespaghettidetective - WARNING - Server WS ERROR: [Errno 104] Connection reset by peer 2022-01-18 15:23:47,230 - octoprint.plugins.thespaghettidetective - WARNING - WS Closed 2022-01-18 15:29:02,093 - octoprint.plugins.thespaghettidetective - WARNING - Server WS ERROR: [Errno 104] Connection reset by peer 2022-01-18 15:29:02,100 - octoprint.plugins.thespaghettidetective - WARNING - WS Closed 2022-01-18 15:30:46,324 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2022-01-18 15:30:52,588 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 906, 'printer_state': 'OFFLINE'} 2022-01-18 15:34:43,347 - octoprint.plugins.thespaghettidetective - WARNING - Server WS ERROR: [Errno 104] Connection reset by peer 2022-01-18 15:34:43,349 - octoprint.plugins.thespaghettidetective - WARNING - WS Closed 2022-01-18 15:39:01,907 - octoprint.plugins.thespaghettidetective - WARNING - Server WS ERROR: Connection is already closed. 2022-01-18 15:39:01,909 - octoprint.plugins.thespaghettidetective - WARNING - WS Closed 2022-01-18 15:44:15,133 - octoprint.plugins.thespaghettidetective - WARNING - Server WS ERROR: Connection is already closed. 2022-01-18 15:44:15,135 - octoprint.plugins.thespaghettidetective - WARNING - WS Closed 2022-01-18 15:45:46,325 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2022-01-18 15:45:52,588 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 1806, 'printer_state': 'OFFLINE'} 2022-01-18 15:49:24,282 - octoprint.plugins.thespaghettidetective - WARNING - Server WS ERROR: [Errno 104] Connection reset by peer 2022-01-18 15:49:24,285 - octoprint.plugins.thespaghettidetective - WARNING - WS Closed 2022-01-18 15:53:51,933 - octoprint.plugins.thespaghettidetective - WARNING - Server WS ERROR: [Errno 104] Connection reset by peer 2022-01-18 15:53:51,940 - octoprint.plugins.thespaghettidetective - WARNING - WS Closed 2022-01-18 15:59:44,973 - octoprint.plugins.thespaghettidetective - WARNING - Server WS ERROR: [Errno 104] Connection reset by peer 2022-01-18 15:59:44,978 - octoprint.plugins.thespaghettidetective - WARNING - WS Closed 2022-01-18 16:00:46,326 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2022-01-18 16:00:52,592 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 2706, 'printer_state': 'OFFLINE'} 2022-01-18 16:04:26,242 - octoprint.plugins.thespaghettidetective - WARNING - Server WS ERROR: [Errno 104] Connection reset by peer 2022-01-18 16:04:26,247 - octoprint.plugins.thespaghettidetective - WARNING - WS Closed 2022-01-18 16:05:37,475 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Opening serial connection" 2022-01-18 16:05:37,476 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 250000 2022-01-18 16:05:37,514 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial connection" to "Connecting" 2022-01-18 16:05:37,520 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 16:05:52,197 - octoprint.server.api.system - INFO - Performing command for core:restart: sudo service octoprint restart 2022-01-18 16:07:23,418 - octoprint.startup - INFO - ****************************************************************************** 2022-01-18 16:07:23,420 - octoprint.startup - INFO - Starting OctoPrint 1.7.2 2022-01-18 16:07:23,420 - octoprint.startup - INFO - ****************************************************************************** 2022-01-18 16:07:23,703 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity changed from offline to online 2022-01-18 16:07:23,810 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: online 2022-01-18 16:07:23,811 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 8.8.8.8:53 is working 2022-01-18 16:07:23,811 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is working 2022-01-18 16:07:23,981 - octoprint.startup - INFO - Blacklist processing done, adding 3 blacklisted plugin versions: roomtemp (any), GcodeEditor (>=0.1.1,<=0.2.8), gcodeleveling (>=0.1.0,<=0.1.1) 2022-01-18 16:07:23,982 - octoprint.plugin.core - WARNING - Invalid version requirement >=0.1.1,<=0.2.8 for blacklist entry GcodeEditor, ignoring 2022-01-18 16:07:23,982 - octoprint.plugin.core - WARNING - Invalid version requirement >=0.1.0,<=0.1.1 for blacklist entry gcodeleveling, ignoring 2022-01-18 16:07:24,010 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2022-01-18 16:07:24,716 - octoprint.plugin.core - INFO - Plugin TouchUI (0.3.18) is disabled. 2022-01-18 16:07:24,939 - octoprint.plugin.core - INFO - Plugin CuraEngine Legacy (1.1.2) is disabled. 2022-01-18 16:07:24,944 - octoprint.plugin.core - INFO - Plugin Creality Temperature (1.2.4) is disabled. 2022-01-18 16:07:25,084 - octoprint.plugin.core - INFO - Plugin Octolapse (0.4.1) is disabled. 2022-01-18 16:07:25,123 - octoprint.plugin.core - INFO - Plugin DisplayLayerProgress Plugin (1.27.2) is disabled. 2022-01-18 16:07:25,129 - octoprint.plugin.core - INFO - Plugin Creality-2x-temperature-reporting-fix (0.0.4) is disabled. 2022-01-18 16:07:25,146 - octoprint.plugin.core - INFO - Plugin Bed Visualizer (1.1.1) is disabled. 2022-01-18 16:07:25,212 - octoprint.startup - INFO - Added settings overlay from plugin dashboard 2022-01-18 16:07:25,213 - octoprint.plugin.core - INFO - Found 30 plugin(s) providing 23 mixin implementations, 59 hook handlers 2022-01-18 16:07:25,274 - octoprint.server.heartbeat - INFO - Starting server heartbeat, 900.0s interval 2022-01-18 16:07:25,289 - octoprint.server - INFO - Intermediary server started 2022-01-18 16:07:25,302 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/pi/.octoprint/uploads... 2022-01-18 16:07:25,317 - octoprint.filemanager.storage - INFO - ... file metadata for /home/pi/.octoprint/uploads initialized successfully. 2022-01-18 16:07:25,319 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_SHOW (needs: "Need(method='role', value='plugin_action_command_notification_show')") 2022-01-18 16:07:25,320 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_CLEAR (needs: "Need(method='role', value='plugin_action_command_notification_clear')") 2022-01-18 16:07:25,321 - octoprint.server - INFO - Added new permission from plugin action_command_prompt: PLUGIN_ACTION_COMMAND_PROMPT_INTERACT (needs: "Need(method='role', value='plugin_action_command_prompt_interact')") 2022-01-18 16:07:25,321 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_READ (needs: "Need(method='role', value='plugin_announcements_read')") 2022-01-18 16:07:25,322 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_MANAGE (needs: "Need(method='role', value='plugin_announcements_manage'), Need(method='role', value='plugin_announcements_read')") 2022-01-18 16:07:25,323 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_ADMIN (needs: "Need(method='role', value='plugin_appkeys_admin')") 2022-01-18 16:07:25,324 - octoprint.server - INFO - Added new permission from plugin backup: PLUGIN_BACKUP_ACCESS (needs: "Need(method='role', value='plugin_backup_access')") 2022-01-18 16:07:25,325 - octoprint.server - INFO - Added new permission from plugin dashboard: PLUGIN_DASHBOARD_ADMIN (needs: "Need(method='role', value='plugin_dashboard_admin')") 2022-01-18 16:07:25,325 - octoprint.server - INFO - Added new permission from plugin firmware_check: PLUGIN_FIRMWARE_CHECK_DISPLAY (needs: "Need(method='role', value='plugin_firmware_check_display')") 2022-01-18 16:07:25,326 - octoprint.server - INFO - Added new permission from plugin logging: PLUGIN_LOGGING_MANAGE (needs: "Need(method='role', value='plugin_logging_manage')") 2022-01-18 16:07:25,327 - octoprint.server - INFO - Added new permission from plugin pi_support: PLUGIN_PI_SUPPORT_STATUS (needs: "Need(method='role', value='plugin_pi_support_check')") 2022-01-18 16:07:25,328 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_MANAGE (needs: "Need(method='role', value='plugin_pluginmanager_manage')") 2022-01-18 16:07:25,329 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_INSTALL (needs: "Need(method='role', value='plugin_pluginmanager_install'), Need(method='role', value='plugin_pluginmanager_manage')") 2022-01-18 16:07:25,330 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CHECK (needs: "Need(method='role', value='plugin_softwareupdate_check')") 2022-01-18 16:07:25,330 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_UPDATE (needs: "Need(method='role', value='plugin_softwareupdate_update')") 2022-01-18 16:07:25,331 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CONFIGURE (needs: "Need(method='role', value='plugin_softwareupdate_configure')") 2022-01-18 16:07:25,339 - octoprint.printer.standard - INFO - Using print time estimator provided by PrintTimeGenius 2022-01-18 16:07:25,339 - octoprint.printer.standard - INFO - Using print time estimator provided by SlicerEstimator 2022-01-18 16:07:26,091 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2022-01-18 16:07:26,837 - octoprint.util.pip - INFO - Version of pip is 21.3.1 2022-01-18 16:07:26,839 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-01-18 16:07:26,840 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-01-18 16:07:26,941 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk 2022-01-18 16:07:27,020 - octoprint.plugins.firmwareupdater - INFO - Python binproto2 package installed: False 2022-01-18 16:07:27,043 - octoprint.plugin.core - INFO - Initialized 23 plugin implementation(s) 2022-01-18 16:07:27,052 - octoprint.plugin.core - INFO - 30 plugin(s) registered with the system: | Access Anywhere - The Spaghetti Detective (1.8.9) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_thespaghettidetective | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/appkeys | Backup & Restore (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/backup | !Bed Visualizer (1.1.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_bedlevelvisualizer | Core Wizard (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/corewizard | !Creality Temperature (1.2.4) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_CrealityTemperature | !Creality-2x-temperature-reporting-fix (0.0.4) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_ender3v2tempfix | !CuraEngine Legacy (1.1.2) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_curalegacy | Dashboard (1.19.6) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_dashboard | Discovery (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/discovery | !DisplayLayerProgress Plugin (1.27.2) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_DisplayLayerProgress | Error Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/errortracking | Event Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/eventmanager | File Check (2021.2.23) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_file_check | Firmware Check (2021.10.11) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmware_check | Firmware Updater (1.13.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmwareupdater | GCode Viewer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/gcodeviewer | Logging (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/logging | !Octolapse (0.4.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_octolapse | Pi Support Plugin (2021.10.28) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/pluginmanager | PrintTimeGenius Plugin (2.2.8) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_PrintTimeGenius | Slicer Estimator (1.2.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_SlicerEstimator | Software Update (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/softwareupdate | !TouchUI (0.3.18) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_touchui | Virtual Printer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2022-01-18 16:07:27,075 - octoprint.environment - INFO - Detected environment is Python 3.9.2 under Linux (linux). Details: | hardware: | cores: 4 | freq: 1800.0 | ram: 1909063680 | os: | bits: 32 | id: linux | platform: linux | plugins: | pi_support: | model: Raspberry Pi 4 Model B Rev 1.5 | octopi_version: 1.0.0 | throttle_state: '0x0' | python: | pip: 21.3.1 | version: 3.9.2 | virtualenv: /home/pi/oprint 2022-01-18 16:07:27,084 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/webassets... 2022-01-18 16:07:27,102 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-cache... 2022-01-18 16:07:27,517 - octoprint.plugins.firmwareupdater - INFO - Setting maximum upload size for /flash to 5243904 2022-01-18 16:07:27,518 - octoprint.server - INFO - Shutting down intermediary server... 2022-01-18 16:07:27,659 - octoprint.server - INFO - Intermediary server shut down 2022-01-18 16:07:27,661 - octoprint.events - INFO - Processing startup event, this is our first event 2022-01-18 16:07:27,661 - octoprint.events - INFO - Adding 2 events to queue that were held back before startup event 2022-01-18 16:07:27,661 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue... 2022-01-18 16:07:27,665 - octoprint.server - INFO - Autoconnect on startup is configured, trying to connect to the printer... 2022-01-18 16:07:27,673 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue 2022-01-18 16:07:27,705 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json 2022-01-18 16:07:27,729 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2022-01-18 16:07:27,906 - octoprint.server - INFO - Trying to connect to configured serial port None 2022-01-18 16:07:27,953 - octoprint.plugins.tracking - INFO - Sent tracking event system_unthrottled, payload: {'throttled_now': False, 'throttled_past': False, 'throttled_mask': 0, 'throttled_voltage_now': False, 'throttled_voltage_past': False, 'throttled_overheat_now': False, 'throttled_overheat_past': False} 2022-01-18 16:07:28,012 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2022-01-18 16:07:28,048 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder... 2022-01-18 16:07:28,073 - octoprint.server.util.watchdog - INFO - ... initial scan done. 2022-01-18 16:07:28,504 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 7 port/baudrate candidates: /dev/ttyUSB0@115200, /dev/ttyUSB0@250000, /dev/ttyUSB0@230400, /dev/ttyUSB0@57600, /dev/ttyUSB0@38400, /dev/ttyUSB0@19200, /dev/ttyUSB0@9600 2022-01-18 16:07:28,504 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200 2022-01-18 16:07:28,504 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200 2022-01-18 16:07:28,624 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-18 16:07:28,626 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 16:07:28,677 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Operational" 2022-01-18 16:07:28,684 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 16:07:28,703 - octoprint.plugins.firmwareupdater - INFO - Got CONNECTED event 2022-01-18 16:07:28,704 - octoprint.plugins.firmwareupdater - INFO - Run postflash flag is not set 2022-01-18 16:07:28,779 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin CR-6 community firmware - release 6.1 (based on Marlin 2.0.8.1) (Jun 4 2021 16:53:51)" 2022-01-18 16:07:28,832 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2022-01-18 16:07:28,833 - octoprint.plugins.firmwareupdater - INFO - Setting BINARY_FILE_TRANSFER capability to False 2022-01-18 16:07:28,840 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting 2022-01-18 16:07:28,850 - octoprint.util.comm - INFO - Firmware states that it supports emergency GCODEs to be sent without waiting for an acknowledgement first 2022-01-18 16:07:28,963 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on raspberrypi._http._tcp.local.' for _http._tcp.local. 2022-01-18 16:07:28,990 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {'firmware_name': 'Marlin CR-6 community firmware - release 6.1 (based on Marlin 2.0.8.1) (Jun 4 2021 16:53:51)', 'printer_port': None, 'printer_baudrate': 0} 2022-01-18 16:07:29,780 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on raspberrypi._octoprint._tcp.local.' for _octoprint._tcp.local. 2022-01-18 16:07:29,811 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance on raspberrypi for SSDP 2022-01-18 16:07:29,844 - octoprint.server - INFO - Listening on http://127.0.0.1:5000 2022-01-18 16:07:29,930 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2022-01-18 16:07:30,755 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2022-01-18 16:07:30,757 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-01-18 16:07:30,767 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-01-18 16:07:30,806 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 11.6GB. That is considered sufficient for updating. 2022-01-18 16:07:30,921 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2022-01-18 16:07:30,960 - octoprint.plugins.SlicerEstimator - INFO - Started up SlicerEstimator 2022-01-18 16:07:30,961 - octoprint.plugins.dashboard - INFO - Dashboard started 2022-01-18 16:07:30,964 - octoprint.JsFrontendErrors(Dash) - INFO - Js Logger (Dash) started 2022-01-18 16:07:31,095 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'http://192.168.1.76/', 'path': '/', 'query_string': 'l10n=en'} 2022-01-18 16:07:31,172 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 6, 'printer_state': 'OPERATIONAL'} 2022-01-18 16:07:31,386 - octoprint.plugins.tracking - INFO - Sent tracking event pong, payload: {'version': '1.7.2', 'os': 'linux', 'bits': 32, 'python': '3.9.2', 'pip': '21.3.1', 'cores': 4, 'freq': 1800.0, 'ram': 1909063680, 'pi_model': 'Raspberry Pi 4 Model B Rev 1.5', 'octopi_version': '1.0.0', 'plugins': 'thespaghettidetective:1.8.9,slicerestimator:1.2.0,printtimegenius:2.2.8,firmwareupdater:1.13.0,dashboard:1.19.6'} 2022-01-18 16:07:31,395 - octoprint.plugins.thespaghettidetective - INFO - Linked printer: {'is_pro': True, 'id': 95565, 'name': 'My Awesome Cloud Printer'} 2022-01-18 16:07:31,403 - octoprint.plugins.thespaghettidetective - INFO - Starting webcam streamer 2022-01-18 16:07:31,608 - octoprint.plugins.tracking - INFO - Sent tracking event startup, payload: {'version': '1.7.2', 'os': 'linux', 'bits': 32, 'python': '3.9.2', 'pip': '21.3.1', 'cores': 4, 'freq': 1800.0, 'ram': 1909063680, 'pi_model': 'Raspberry Pi 4 Model B Rev 1.5', 'octopi_version': '1.0.0'} 2022-01-18 16:07:33,284 - octoprint.plugins.thespaghettidetective - WARNING - No camera detected. Skipping webcam streaming 2022-01-18 16:07:36,703 - octoprint.server.preemptive_cache - INFO - ... done in 5.61s 2022-01-18 16:07:37,467 - octoprint.server.views - INFO - Found path / in cache (key: ui:_default:http://192.168.1.76/:en), signaling as cached 2022-01-18 16:07:37,483 - octoprint.server.views - INFO - Found path / in cache (key: ui:_default:http://192.168.1.76/:en), signaling as cached 2022-01-18 16:07:37,494 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 16:07:37,495 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 16:07:38,087 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.71 2022-01-18 16:07:38,169 - octoprint.server.util.flask - INFO - Passively logging in user pi from ::ffff:192.168.1.71 2022-01-18 16:07:38,169 - octoprint.access.users - INFO - Logged in user: pi 2022-01-18 16:07:39,940 - octoprint.server.util.sockjs - INFO - User pi logged in on the socket from client ::ffff:192.168.1.71 2022-01-18 16:07:40,709 - octoprint.plugins.tracking - INFO - Sent tracking event webui_load, payload: {'browser_name': 'Chrome', 'browser_version': '97.0.4692.71', 'os_name': 'Windows', 'os_version': '10'} 2022-01-18 16:09:00,342 - octoprint.plugins.thespaghettidetective - WARNING - Server WS ERROR: [Errno 104] Connection reset by peer 2022-01-18 16:09:00,346 - octoprint.plugins.thespaghettidetective - WARNING - WS Closed 2022-01-18 16:09:40,150 - octoprint.plugins.action_command_notification - INFO - Got a notification: Media Removed 2022-01-18 16:09:43,141 - octoprint.plugins.action_command_notification - INFO - Got a notification: Media Inserted 2022-01-18 16:11:31,259 - octoprint.plugins.dashboard - INFO - GcodePreProcessor started processing. 2022-01-18 16:11:37,088 - octoprint.filemanager.analysis - INFO - Starting analysis of local:CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode 2022-01-18 16:11:37,093 - octoprint.filemanager.analysis - INFO - Invoking analysis command: /home/pi/oprint/bin/python -m octoprint analysis gcode --speed-x=6000 --speed-y=6000 --max-t=10 --throttle=0.0 --throttle-lines=100 --bed-z=0.0 /home/pi/.octoprint/uploads/CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode 2022-01-18 16:11:43,677 - octoprint.printer.standard.job - INFO - Print job selected - origin: local, path: CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode, owner: pi, user: pi 2022-01-18 16:11:47,416 - octoprint.util.comm - INFO - Starting job on behalf of user pi 2022-01-18 16:11:47,419 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting" 2022-01-18 16:11:47,490 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode, owner: pi, user: pi 2022-01-18 16:11:47,517 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 16:11:47,524 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Printing" 2022-01-18 16:11:47,530 - octoprint.filemanager.analysis - INFO - Probably starting printing, aborting analysis of file-upload. 2022-01-18 16:11:47,551 - octoprint.plugins.action_command_notification - INFO - Got a notification: Time Left 11h08m07s 2022-01-18 16:11:47,569 - octoprint.plugins.SlicerEstimator - INFO - Detected Cura 2022-01-18 16:11:47,574 - octoprint.plugins.dashboard - INFO - Gcode not pre-processed by Dashboard. Processing now. 2022-01-18 16:11:47,589 - octoprint.plugins.dashboard - INFO - GcodePreProcessor started processing. 2022-01-18 16:11:47,628 - octoprint.plugins.action_command_notification - INFO - Got a notification: Bed Heating... 2022-01-18 16:11:47,773 - octoprint.plugins.tracking - INFO - Sent tracking event print_started, payload: {'origin': 'local', 'file': '73da9fe1157f6619f8666e1b02fb2b0562c691db'} 2022-01-18 16:11:48,201 - backoff - INFO - Backing off capture_jpeg(...) for 0.7s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:11:48,879 - backoff - INFO - Backing off capture_jpeg(...) for 0.3s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:11:49,166 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:11:49,602 - octoprint.util.comm - INFO - Printer seems to support the busy protocol, will adjust timeouts and set busy interval accordingly 2022-01-18 16:11:52,723 - octoprint.plugins.dashboard - INFO - Gcode pre-processing done. 2022-01-18 16:11:52,724 - octoprint.plugins.dashboard - INFO - GcodePreProcessor found layers: 219 2022-01-18 16:11:52,724 - octoprint.plugins.dashboard - INFO - GcodePreProcessor found filament changes: 0 2022-01-18 16:11:52,724 - octoprint.plugins.dashboard - INFO - GcodePreProcessor saving layer count in file metadata 2022-01-18 16:11:58,201 - backoff - INFO - Backing off capture_jpeg(...) for 1.0s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:11:59,198 - backoff - INFO - Backing off capture_jpeg(...) for 0.6s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:11:59,837 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:12:08,869 - backoff - INFO - Backing off capture_jpeg(...) for 0.7s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:12:09,588 - backoff - INFO - Backing off capture_jpeg(...) for 1.8s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:12:11,450 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:12:19,479 - backoff - INFO - Backing off capture_jpeg(...) for 0.7s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:12:20,184 - backoff - INFO - Backing off capture_jpeg(...) for 1.6s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:12:21,761 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:12:29,790 - backoff - INFO - Backing off capture_jpeg(...) for 0.2s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:12:29,986 - backoff - INFO - Backing off capture_jpeg(...) for 0.8s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:12:30,812 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:12:39,844 - backoff - INFO - Backing off capture_jpeg(...) for 0.4s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:12:40,255 - backoff - INFO - Backing off capture_jpeg(...) for 0.3s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:12:40,566 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:12:50,601 - backoff - INFO - Backing off capture_jpeg(...) for 0.2s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:12:50,797 - backoff - INFO - Backing off capture_jpeg(...) for 0.0s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:12:50,829 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:13:00,863 - backoff - INFO - Backing off capture_jpeg(...) for 0.5s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:13:01,393 - backoff - INFO - Backing off capture_jpeg(...) for 1.5s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:13:02,869 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:13:10,900 - backoff - INFO - Backing off capture_jpeg(...) for 0.6s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:13:11,478 - backoff - INFO - Backing off capture_jpeg(...) for 0.4s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:13:11,845 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:13:21,878 - backoff - INFO - Backing off capture_jpeg(...) for 0.2s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:13:22,108 - backoff - INFO - Backing off capture_jpeg(...) for 1.7s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:13:23,859 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:13:31,889 - backoff - INFO - Backing off capture_jpeg(...) for 0.7s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:13:32,630 - backoff - INFO - Backing off capture_jpeg(...) for 1.6s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:13:34,237 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:13:42,266 - backoff - INFO - Backing off capture_jpeg(...) for 0.2s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:13:42,450 - backoff - INFO - Backing off capture_jpeg(...) for 1.9s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:13:43,085 - octoprint.plugins.thespaghettidetective - WARNING - Server WS ERROR: Connection is already closed. 2022-01-18 16:13:43,087 - octoprint.plugins.thespaghettidetective - WARNING - WS Closed 2022-01-18 16:13:44,380 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:13:52,409 - backoff - INFO - Backing off capture_jpeg(...) for 0.6s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:13:53,028 - backoff - INFO - Backing off capture_jpeg(...) for 0.1s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:13:53,116 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:14:01,815 - octoprint.plugins.action_command_notification - INFO - Got a notification: Printing... 2022-01-18 16:14:01,823 - octoprint.util.comm - INFO - Telling the printer to set the busy interval to our "communicationBusy" timeout - 1s = 2s 2022-01-18 16:14:03,154 - backoff - INFO - Backing off capture_jpeg(...) for 1.0s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:14:04,134 - backoff - INFO - Backing off capture_jpeg(...) for 1.8s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:14:05,908 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:14:13,938 - backoff - INFO - Backing off capture_jpeg(...) for 0.8s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:14:14,738 - backoff - INFO - Backing off capture_jpeg(...) for 1.6s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:14:16,388 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:14:24,418 - backoff - INFO - Backing off capture_jpeg(...) for 0.2s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:14:24,622 - backoff - INFO - Backing off capture_jpeg(...) for 1.2s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:14:25,851 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:14:34,891 - backoff - INFO - Backing off capture_jpeg(...) for 0.5s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:14:35,360 - backoff - INFO - Backing off capture_jpeg(...) for 1.2s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:14:36,581 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:14:45,615 - backoff - INFO - Backing off capture_jpeg(...) for 0.6s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:14:46,243 - backoff - INFO - Backing off capture_jpeg(...) for 0.2s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:14:46,448 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:14:56,484 - backoff - INFO - Backing off capture_jpeg(...) for 0.6s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:14:57,124 - backoff - INFO - Backing off capture_jpeg(...) for 1.2s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:14:57,602 - octoprint.plugins.action_command_notification - INFO - Got a notification: Printing... 2022-01-18 16:14:58,364 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:15:07,397 - backoff - INFO - Backing off capture_jpeg(...) for 0.8s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:15:08,196 - backoff - INFO - Backing off capture_jpeg(...) for 0.6s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:15:08,847 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:15:17,883 - backoff - INFO - Backing off capture_jpeg(...) for 0.5s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:15:18,436 - backoff - INFO - Backing off capture_jpeg(...) for 1.7s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:15:20,166 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:15:26,825 - octoprint.plugins.action_command_notification - INFO - Got a notification: Waiting for heat-up... 2022-01-18 16:15:28,198 - backoff - INFO - Backing off capture_jpeg(...) for 0.0s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:15:28,229 - backoff - INFO - Backing off capture_jpeg(...) for 0.7s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:15:28,926 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:15:38,971 - backoff - INFO - Backing off capture_jpeg(...) for 0.9s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:15:39,842 - backoff - INFO - Backing off capture_jpeg(...) for 1.7s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:15:41,552 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:15:49,583 - backoff - INFO - Backing off capture_jpeg(...) for 0.7s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:15:50,330 - backoff - INFO - Backing off capture_jpeg(...) for 0.8s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:15:51,117 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:16:00,152 - backoff - INFO - Backing off capture_jpeg(...) for 0.9s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:16:01,040 - backoff - INFO - Backing off capture_jpeg(...) for 1.0s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:16:02,038 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:16:07,679 - octoprint.plugins.action_command_notification - INFO - Got a notification: Printing... 2022-01-18 16:16:11,073 - backoff - INFO - Backing off capture_jpeg(...) for 0.1s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:16:11,220 - backoff - INFO - Backing off capture_jpeg(...) for 0.6s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:16:11,793 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:16:19,512 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 29, current line = 30 | Last lines in terminal: | Recv: T:245.16 /245.00 B:80.49 /80.00 @:80 B@:48 | Recv: echo:busy: processing | Recv: ok | Send: N24 G92 E0*113 | Recv: X:10.4000 Y:20.0000 Z:0.2800 E:0.0000 Count X:832 Y:13600 Z:183 | Recv: ok | Send: N25 G1 Z2.0 F3000*44 | Recv: T:245.00 /245.00 B:80.46 /80.00 @:82 B@:53 | Recv: ok | Send: N26 G92 E0*115 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13187 Z:188 | Recv: ok | Send: N27 G92 E0*114 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13154 Z:189 | Recv: ok | Send: N28 G1 F3000 E-6.5*18 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 2022-01-18 16:16:19,542 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 29, current line = 30 | Last lines in terminal: | Recv: X:10.4000 Y:20.0000 Z:0.2800 E:0.0000 Count X:832 Y:13600 Z:183 | Recv: ok | Send: N25 G1 Z2.0 F3000*44 | Recv: T:245.00 /245.00 B:80.46 /80.00 @:82 B@:53 | Recv: ok | Send: N26 G92 E0*115 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13187 Z:188 | Recv: ok | Send: N27 G92 E0*114 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13154 Z:189 | Recv: ok | Send: N28 G1 F3000 E-6.5*18 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 2022-01-18 16:16:19,572 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 29, current line = 30 | Last lines in terminal: | Recv: ok | Send: N26 G92 E0*115 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13187 Z:188 | Recv: ok | Send: N27 G92 E0*114 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13154 Z:189 | Recv: ok | Send: N28 G1 F3000 E-6.5*18 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 2022-01-18 16:16:19,601 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 29, current line = 30 | Last lines in terminal: | Send: N27 G92 E0*114 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13154 Z:189 | Recv: ok | Send: N28 G1 F3000 E-6.5*18 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 2022-01-18 16:16:19,631 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 29, current line = 30 | Last lines in terminal: | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 219*32 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 2022-01-18 16:16:19,795 - octoprint.util.comm - WARNING - Printer keeps requesting line 29 again and again, communication stuck 2022-01-18 16:16:19,795 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Error" 2022-01-18 16:16:19,802 - octoprint.util.comm - INFO - Force-sending M112 to the printer 2022-01-18 16:16:19,808 - octoprint.filemanager.analysis - INFO - Starting analysis of local:CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode 2022-01-18 16:16:19,811 - octoprint.filemanager.analysis - INFO - Invoking analysis command: /home/pi/oprint/bin/python -m octoprint analysis gcode --speed-x=6000 --speed-y=6000 --max-t=10 --throttle=0.0 --throttle-lines=100 --bed-z=0.0 /home/pi/.octoprint/uploads/CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode 2022-01-18 16:16:19,852 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2022-01-18 16:16:19,977 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2022-01-18 16:16:20,118 - octoprint.plugins.tracking - INFO - Sent tracking event commerror_resend_loop, payload: {'commerror_text': 'Printer keeps requesting line 29 again and again, communication stuck'} 2022-01-18 16:16:20,287 - octoprint.plugins.tracking - INFO - Sent tracking event print_failed, payload: {'origin': 'local', 'file': '73da9fe1157f6619f8666e1b02fb2b0562c691db', 'elapsed': 272, 'reason': 'error', 'commerror_text': 'Printer keeps requesting line 29 again and again, communication stuck'} 2022-01-18 16:16:20,399 - octoprint.util.comm - INFO - Firmware didn't send an 'ok' with their resend request. That's a known bug with some firmware variants out there. Simulating an ok to continue... 2022-01-18 16:16:38,998 - octoprint.plugins.SlicerEstimator - INFO - Detected Cura 2022-01-18 16:16:39,999 - octoprint.filemanager.analysis - INFO - Found 40087.0s from slicer for file CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode 2022-01-18 16:16:39,999 - octoprint.filemanager.analysis - INFO - Analysis of entry local:CCR6SE CCR6SE Tie_Fighter_Echo_Dot_3_-_Left_Wing__Base_ eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode finished, needed 20.19s 2022-01-18 16:16:40,011 - octoprint.plugins.dashboard - INFO - GcodePreProcessor found layers: 219 2022-01-18 16:16:40,011 - octoprint.plugins.dashboard - INFO - GcodePreProcessor found filament changes: 0 2022-01-18 16:16:40,012 - octoprint.plugins.dashboard - INFO - GcodePreProcessor saving layer count in file metadata 2022-01-18 16:22:25,275 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2022-01-18 16:22:31,155 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 906, 'printer_state': 'OFFLINE'} 2022-01-18 16:24:20,654 - octoprint.plugins.thespaghettidetective - WARNING - Server WS ERROR: [Errno 104] Connection reset by peer 2022-01-18 16:24:20,658 - octoprint.plugins.thespaghettidetective - WARNING - WS Closed 2022-01-18 16:27:33,082 - octoprint.plugins.dashboard - INFO - GcodePreProcessor started processing. 2022-01-18 16:27:33,451 - octoprint.filemanager.analysis - INFO - Starting analysis of local:CCR6SE Push-in_V-slot_covers_-_BackLeft eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode 2022-01-18 16:27:33,451 - octoprint.filemanager.analysis - INFO - Invoking analysis command: /home/pi/oprint/bin/python -m octoprint analysis gcode --speed-x=6000 --speed-y=6000 --max-t=10 --throttle=0.0 --throttle-lines=100 --bed-z=0.0 /home/pi/.octoprint/uploads/CCR6SE Push-in_V-slot_covers_-_BackLeft eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode 2022-01-18 16:27:35,304 - octoprint.plugins.SlicerEstimator - INFO - Detected Cura 2022-01-18 16:27:36,305 - octoprint.filemanager.analysis - INFO - Found 7413.0s from slicer for file CCR6SE Push-in_V-slot_covers_-_BackLeft eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode 2022-01-18 16:27:36,305 - octoprint.filemanager.analysis - INFO - Analysis of entry local:CCR6SE Push-in_V-slot_covers_-_BackLeft eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode finished, needed 2.85s 2022-01-18 16:27:36,318 - octoprint.plugins.dashboard - INFO - GcodePreProcessor found layers: 22 2022-01-18 16:27:36,318 - octoprint.plugins.dashboard - INFO - GcodePreProcessor found filament changes: 0 2022-01-18 16:27:36,319 - octoprint.plugins.dashboard - INFO - GcodePreProcessor saving layer count in file metadata 2022-01-18 16:27:48,542 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Opening serial connection" 2022-01-18 16:27:48,543 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200 2022-01-18 16:27:48,567 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial connection" to "Connecting" 2022-01-18 16:27:48,571 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 16:27:48,586 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 16:27:48,589 - octoprint.util.comm - INFO - Changing monitoring state from "Connecting" to "Operational" 2022-01-18 16:27:48,608 - octoprint.plugins.firmwareupdater - INFO - Got CONNECTED event 2022-01-18 16:27:48,609 - octoprint.plugins.firmwareupdater - INFO - Run postflash flag is not set 2022-01-18 16:27:48,612 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 16:27:48,668 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin CR-6 community firmware - release 6.1 (based on Marlin 2.0.8.1) (Jun 4 2021 16:53:51)" 2022-01-18 16:27:48,739 - octoprint.plugins.firmwareupdater - INFO - Setting BINARY_FILE_TRANSFER capability to False 2022-01-18 16:27:48,781 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting 2022-01-18 16:27:48,792 - octoprint.util.comm - INFO - Firmware states that it supports emergency GCODEs to be sent without waiting for an acknowledgement first 2022-01-18 16:27:48,942 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {'firmware_name': 'Marlin CR-6 community firmware - release 6.1 (based on Marlin 2.0.8.1) (Jun 4 2021 16:53:51)', 'printer_port': '/dev/ttyUSB0', 'printer_baudrate': 115200} 2022-01-18 16:29:05,731 - octoprint.printer.standard.job - INFO - Print job selected - origin: local, path: CCR6SE Push-in_V-slot_covers_-_BackLeft eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode, owner: pi, user: pi 2022-01-18 16:29:05,750 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting" 2022-01-18 16:29:05,755 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: CCR6SE Push-in_V-slot_covers_-_BackLeft eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C.gcode, owner: pi, user: pi 2022-01-18 16:29:05,783 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 16:29:05,797 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Printing" 2022-01-18 16:29:05,829 - octoprint.plugins.SlicerEstimator - INFO - Detected Cura 2022-01-18 16:29:05,840 - octoprint.plugins.action_command_notification - INFO - Got a notification: Time Left 2h03m33s 2022-01-18 16:29:05,885 - octoprint.plugins.action_command_notification - INFO - Got a notification: Bed Heating... 2022-01-18 16:29:06,139 - octoprint.plugins.tracking - INFO - Sent tracking event print_started, payload: {'origin': 'local', 'file': 'c4f435e70c4e9248a46bd22ad699bc376b442397'} 2022-01-18 16:29:06,362 - backoff - INFO - Backing off capture_jpeg(...) for 0.5s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:29:06,887 - backoff - INFO - Backing off capture_jpeg(...) for 1.1s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:29:07,880 - octoprint.util.comm - INFO - Printer seems to support the busy protocol, will adjust timeouts and set busy interval accordingly 2022-01-18 16:29:07,975 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:29:17,006 - backoff - INFO - Backing off capture_jpeg(...) for 0.4s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:29:17,460 - backoff - INFO - Backing off capture_jpeg(...) for 1.8s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:29:19,263 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:29:27,293 - backoff - INFO - Backing off capture_jpeg(...) for 0.5s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:29:27,842 - backoff - INFO - Backing off capture_jpeg(...) for 0.7s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:29:28,596 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:29:37,629 - backoff - INFO - Backing off capture_jpeg(...) for 1.0s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:29:38,594 - backoff - INFO - Backing off capture_jpeg(...) for 1.2s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:29:39,816 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:29:47,846 - backoff - INFO - Backing off capture_jpeg(...) for 0.4s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:29:48,290 - backoff - INFO - Backing off capture_jpeg(...) for 1.3s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:29:49,572 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:29:58,605 - backoff - INFO - Backing off capture_jpeg(...) for 1.0s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:29:59,567 - backoff - INFO - Backing off capture_jpeg(...) for 0.8s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:30:00,340 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:30:09,371 - backoff - INFO - Backing off capture_jpeg(...) for 0.9s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:30:10,309 - backoff - INFO - Backing off capture_jpeg(...) for 0.1s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:30:10,388 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:30:19,420 - backoff - INFO - Backing off capture_jpeg(...) for 0.6s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:30:20,063 - backoff - INFO - Backing off capture_jpeg(...) for 1.4s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:30:21,502 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:30:29,532 - backoff - INFO - Backing off capture_jpeg(...) for 0.3s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:30:29,843 - backoff - INFO - Backing off capture_jpeg(...) for 0.8s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:30:30,617 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:30:39,651 - backoff - INFO - Backing off capture_jpeg(...) for 0.3s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:30:39,938 - backoff - INFO - Backing off capture_jpeg(...) for 1.0s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:30:40,933 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:30:49,966 - backoff - INFO - Backing off capture_jpeg(...) for 0.9s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:30:50,911 - backoff - INFO - Backing off capture_jpeg(...) for 0.0s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:30:50,943 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:30:59,974 - backoff - INFO - Backing off capture_jpeg(...) for 0.6s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:31:00,544 - backoff - INFO - Backing off capture_jpeg(...) for 0.7s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:31:01,241 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:31:10,276 - backoff - INFO - Backing off capture_jpeg(...) for 0.5s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:31:10,759 - backoff - INFO - Backing off capture_jpeg(...) for 1.6s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:31:12,398 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:31:20,430 - backoff - INFO - Backing off capture_jpeg(...) for 0.5s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:31:20,956 - backoff - INFO - Backing off capture_jpeg(...) for 0.0s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:31:21,013 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:31:31,048 - backoff - INFO - Backing off capture_jpeg(...) for 0.5s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:31:31,591 - backoff - INFO - Backing off capture_jpeg(...) for 1.6s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:31:33,246 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:31:41,277 - backoff - INFO - Backing off capture_jpeg(...) for 0.2s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:31:41,506 - backoff - INFO - Backing off capture_jpeg(...) for 1.0s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:31:42,494 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:31:51,527 - backoff - INFO - Backing off capture_jpeg(...) for 0.4s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:31:51,921 - backoff - INFO - Backing off capture_jpeg(...) for 0.3s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:31:52,221 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:32:02,256 - backoff - INFO - Backing off capture_jpeg(...) for 1.0s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:32:03,246 - backoff - INFO - Backing off capture_jpeg(...) for 1.4s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:32:04,701 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:32:08,177 - octoprint.plugins.action_command_notification - INFO - Got a notification: Printing... 2022-01-18 16:32:08,185 - octoprint.util.comm - INFO - Telling the printer to set the busy interval to our "communicationBusy" timeout - 1s = 2s 2022-01-18 16:32:12,732 - backoff - INFO - Backing off capture_jpeg(...) for 0.9s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:32:13,686 - backoff - INFO - Backing off capture_jpeg(...) for 0.9s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:32:14,574 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:32:23,607 - backoff - INFO - Backing off capture_jpeg(...) for 0.8s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:32:24,380 - backoff - INFO - Backing off capture_jpeg(...) for 0.7s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:32:25,094 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:32:34,132 - backoff - INFO - Backing off capture_jpeg(...) for 0.9s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:32:35,019 - backoff - INFO - Backing off capture_jpeg(...) for 0.9s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:32:35,893 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:32:44,927 - backoff - INFO - Backing off capture_jpeg(...) for 0.2s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:32:45,158 - backoff - INFO - Backing off capture_jpeg(...) for 0.4s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:32:45,586 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:32:55,623 - backoff - INFO - Backing off capture_jpeg(...) for 0.3s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:32:55,976 - backoff - INFO - Backing off capture_jpeg(...) for 0.1s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:32:56,053 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:33:06,088 - backoff - INFO - Backing off capture_jpeg(...) for 0.3s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:33:06,365 - backoff - INFO - Backing off capture_jpeg(...) for 0.2s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:33:06,618 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:33:16,651 - backoff - INFO - Backing off capture_jpeg(...) for 0.6s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:33:17,214 - backoff - INFO - Backing off capture_jpeg(...) for 0.4s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:33:17,650 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:33:26,681 - backoff - INFO - Backing off capture_jpeg(...) for 0.2s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:33:26,839 - backoff - INFO - Backing off capture_jpeg(...) for 1.7s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:33:28,578 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:33:37,608 - backoff - INFO - Backing off capture_jpeg(...) for 0.4s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:33:38,032 - backoff - INFO - Backing off capture_jpeg(...) for 0.5s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:33:38,539 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:33:48,573 - backoff - INFO - Backing off capture_jpeg(...) for 0.2s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:33:48,780 - backoff - INFO - Backing off capture_jpeg(...) for 1.6s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:33:50,411 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:33:59,442 - backoff - INFO - Backing off capture_jpeg(...) for 0.5s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:33:59,850 - zeroconf - WARNING - Error with socket 5 (('192.168.1.76', 5353))): [Errno 101] Network is unreachable Traceback (most recent call last): File "/usr/lib/python3.9/asyncio/selector_events.py", line 1056, in sendto self._sock.sendto(data, addr) OSError: [Errno 101] Network is unreachable 2022-01-18 16:33:59,920 - backoff - INFO - Backing off capture_jpeg(...) for 1.9s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:34:01,837 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:34:09,869 - backoff - INFO - Backing off capture_jpeg(...) for 0.3s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:34:10,141 - backoff - INFO - Backing off capture_jpeg(...) for 0.7s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:34:10,824 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:34:16,325 - octoprint.plugins.thespaghettidetective - WARNING - Server WS ERROR: [Errno 104] Connection reset by peer 2022-01-18 16:34:16,328 - octoprint.plugins.thespaghettidetective - WARNING - WS Closed 2022-01-18 16:34:20,866 - backoff - INFO - Backing off capture_jpeg(...) for 0.1s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:34:20,998 - backoff - INFO - Backing off capture_jpeg(...) for 0.4s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:34:21,413 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:34:27,330 - octoprint.plugins.action_command_notification - INFO - Got a notification: Printing... 2022-01-18 16:34:31,447 - backoff - INFO - Backing off capture_jpeg(...) for 0.1s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:34:31,512 - backoff - INFO - Backing off capture_jpeg(...) for 1.0s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:34:32,536 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:34:41,186 - octoprint.plugins.action_command_notification - INFO - Got a notification: Printing... 2022-01-18 16:34:41,569 - backoff - INFO - Backing off capture_jpeg(...) for 0.3s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:34:41,837 - backoff - INFO - Backing off capture_jpeg(...) for 0.7s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:34:42,531 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:34:52,566 - backoff - INFO - Backing off capture_jpeg(...) for 0.0s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:34:52,602 - backoff - INFO - Backing off capture_jpeg(...) for 1.7s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:34:54,324 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:34:56,641 - octoprint.plugins.action_command_notification - INFO - Got a notification: Waiting for heat-up... 2022-01-18 16:35:03,356 - backoff - INFO - Backing off capture_jpeg(...) for 0.4s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:35:03,806 - backoff - INFO - Backing off capture_jpeg(...) for 1.1s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:35:04,871 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:35:13,909 - backoff - INFO - Backing off capture_jpeg(...) for 0.0s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:35:13,920 - backoff - INFO - Backing off capture_jpeg(...) for 1.2s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:35:15,124 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:35:24,158 - backoff - INFO - Backing off capture_jpeg(...) for 0.5s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:35:24,702 - backoff - INFO - Backing off capture_jpeg(...) for 0.4s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:35:25,147 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:35:34,181 - backoff - INFO - Backing off capture_jpeg(...) for 0.9s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:35:35,121 - backoff - INFO - Backing off capture_jpeg(...) for 0.6s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:35:35,770 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:35:37,570 - octoprint.plugins.action_command_notification - INFO - Got a notification: Printing... 2022-01-18 16:35:44,803 - backoff - INFO - Backing off capture_jpeg(...) for 0.6s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:35:45,449 - backoff - INFO - Backing off capture_jpeg(...) for 1.3s (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:35:46,752 - backoff - ERROR - Giving up capture_jpeg(...) after 3 tries (requests.exceptions.ConnectionError: HTTPConnectionPool(host='127.0.0.1', port=8080): Max retries exceeded with url: /?action=snapshot (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 111] Connection refused'))) 2022-01-18 16:35:49,407 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 29, current line = 30 | Last lines in terminal: | Recv: T:245.00 /245.00 B:80.05 /80.00 @:82 B@:43 | Recv: echo:busy: processing | Recv: ok | Send: N24 G92 E0*113 | Recv: T:245.00 /245.00 B:80.04 /80.00 @:82 B@:48 | Recv: X:10.4000 Y:20.0000 Z:0.2800 E:0.0000 Count X:832 Y:13600 Z:183 | Recv: ok | Send: N25 G1 Z2.0 F3000*44 | Recv: ok | Send: N26 G92 E0*115 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13184 Z:188 | Recv: ok | Send: N27 G92 E0*114 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13147 Z:189 | Recv: ok | Send: N28 G1 F3000 E-6.5*18 | Recv: ok | Send: N29 M117 Printing CCR6SE Push-in_V-slot_covers_-_BackLeft eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 21*69 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 2022-01-18 16:35:49,435 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 29, current line = 30 | Last lines in terminal: | Recv: T:245.00 /245.00 B:80.04 /80.00 @:82 B@:48 | Recv: X:10.4000 Y:20.0000 Z:0.2800 E:0.0000 Count X:832 Y:13600 Z:183 | Recv: ok | Send: N25 G1 Z2.0 F3000*44 | Recv: ok | Send: N26 G92 E0*115 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13184 Z:188 | Recv: ok | Send: N27 G92 E0*114 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13147 Z:189 | Recv: ok | Send: N28 G1 F3000 E-6.5*18 | Recv: ok | Send: N29 M117 Printing CCR6SE Push-in_V-slot_covers_-_BackLeft eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 21*69 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE Push-in_V-slot_covers_-_BackLeft eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 21*69 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 2022-01-18 16:35:49,462 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 29, current line = 30 | Last lines in terminal: | Recv: ok | Send: N26 G92 E0*115 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13184 Z:188 | Recv: ok | Send: N27 G92 E0*114 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13147 Z:189 | Recv: ok | Send: N28 G1 F3000 E-6.5*18 | Recv: ok | Send: N29 M117 Printing CCR6SE Push-in_V-slot_covers_-_BackLeft eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 21*69 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE Push-in_V-slot_covers_-_BackLeft eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 21*69 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE Push-in_V-slot_covers_-_BackLeft eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 21*69 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 2022-01-18 16:35:49,486 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 29, current line = 30 | Last lines in terminal: | Send: N27 G92 E0*114 | Recv: X:10.4000 Y:20.0000 Z:2.0000 E:0.0000 Count X:832 Y:13147 Z:189 | Recv: ok | Send: N28 G1 F3000 E-6.5*18 | Recv: ok | Send: N29 M117 Printing CCR6SE Push-in_V-slot_covers_-_BackLeft eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 21*69 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE Push-in_V-slot_covers_-_BackLeft eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 21*69 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE Push-in_V-slot_covers_-_BackLeft eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 21*69 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE Push-in_V-slot_covers_-_BackLeft eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 21*69 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 2022-01-18 16:35:49,511 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 29, current line = 30 | Last lines in terminal: | Recv: ok | Send: N29 M117 Printing CCR6SE Push-in_V-slot_covers_-_BackLeft eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 21*69 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE Push-in_V-slot_covers_-_BackLeft eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 21*69 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE Push-in_V-slot_covers_-_BackLeft eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 21*69 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE Push-in_V-slot_covers_-_BackLeft eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 21*69 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 | Recv: ok | Send: N29 M117 Printing CCR6SE Push-in_V-slot_covers_-_BackLeft eSUN PETG lw 0.4mm lh 0.2mm if 20.0% ext1 245.0C bed 80.0C - Layer 1 of 21*69 | Recv: Error:No Checksum with line number, Last Line: 28 | Recv: Resend: 29 2022-01-18 16:35:49,645 - octoprint.util.comm - WARNING - Printer keeps requesting line 29 again and again, communication stuck 2022-01-18 16:35:49,646 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Error" 2022-01-18 16:35:49,651 - octoprint.util.comm - INFO - Force-sending M112 to the printer 2022-01-18 16:35:49,699 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2022-01-18 16:35:49,786 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2022-01-18 16:35:49,901 - octoprint.plugins.tracking - INFO - Sent tracking event commerror_resend_loop, payload: {'commerror_text': 'Printer keeps requesting line 29 again and again, communication stuck'} 2022-01-18 16:35:50,045 - octoprint.plugins.tracking - INFO - Sent tracking event print_failed, payload: {'origin': 'local', 'file': 'c4f435e70c4e9248a46bd22ad699bc376b442397', 'elapsed': 403, 'reason': 'error', 'commerror_text': 'Printer keeps requesting line 29 again and again, communication stuck'} 2022-01-18 16:35:50,209 - octoprint.util.comm - INFO - Firmware didn't send an 'ok' with their resend request. That's a known bug with some firmware variants out there. Simulating an ok to continue... 2022-01-18 16:37:25,277 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2022-01-18 16:37:31,170 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 1806, 'printer_state': 'OFFLINE'} 2022-01-18 16:38:50,972 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Opening serial connection" 2022-01-18 16:38:50,974 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200 2022-01-18 16:38:50,999 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial connection" to "Connecting" 2022-01-18 16:38:51,002 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 16:38:51,015 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 16:38:51,017 - octoprint.util.comm - INFO - Changing monitoring state from "Connecting" to "Operational" 2022-01-18 16:38:51,038 - octoprint.plugins.firmwareupdater - INFO - Got CONNECTED event 2022-01-18 16:38:51,038 - octoprint.plugins.firmwareupdater - INFO - Run postflash flag is not set 2022-01-18 16:38:51,039 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-18 16:38:51,103 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin CR-6 community firmware - release 6.1 (based on Marlin 2.0.8.1) (Jun 4 2021 16:53:51)" 2022-01-18 16:38:51,124 - octoprint.plugins.firmwareupdater - INFO - Setting BINARY_FILE_TRANSFER capability to False 2022-01-18 16:38:51,195 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting 2022-01-18 16:38:51,210 - octoprint.util.comm - INFO - Firmware states that it supports emergency GCODEs to be sent without waiting for an acknowledgement first 2022-01-18 16:38:51,614 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {'firmware_name': 'Marlin CR-6 community firmware - release 6.1 (based on Marlin 2.0.8.1) (Jun 4 2021 16:53:51)', 'printer_port': '/dev/ttyUSB0', 'printer_baudrate': 115200} 2022-01-18 16:38:52,056 - octoprint.plugins.thespaghettidetective - WARNING - Server WS ERROR: Connection is already closed. 2022-01-18 16:38:52,056 - octoprint.plugins.thespaghettidetective - WARNING - WS Closed