Changing monitoring state from "Offline" to "Detecting serial connection"
Performing autodetection with 6 port/baudrate candidates: /dev/ttyUSB0@115200, /dev/ttyS4@115200, /dev/ttyS3@115200, /dev/ttyS1@115200, /dev/ttyS0@115200, /dev/ttyS2@115200
Trying port /dev/ttyUSB0, baudrate 115200
Connecting to port /dev/ttyUSB0, baudrate 115200
Handshake attempt #1 with timeout 2.0s
Connected to: Serial<id=0xaf125b90, open=True>(port='/dev/ttyUSB0', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=2.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
Send: N0 M110 N0*125
Recv: start
Changing monitoring state from "Detecting serial connection" to "Operational"
Recv: echo:Marlin 1.1.9.1
Send: N0 M110 N0*125
Recv: 
Recv: echo: Last Updated: 2020-06-20 | Authecho:V56 stored settings retrieved (656 bytes; crc 51462)
Recv: echo:  M149 C ; Units in Celsius
Recv: 
Recv: echo:Filament settings: Disabled
Recv: echo:Maximum Acceleration (units/s2):
Recv: echo:  M201 X500 Y500 Z100 E5 T<min_travel_feedrate> X<max_x_jerk> Y<max_y_jerk> Z<max_z_jerk85 B45 F255
Recv: echo:  M145 S1 H240 B0 F255
Recv: echo:PID settings:
Recv: echo:echo:SD init fail
Recv: ok
Send: N1 M115*39
Recv: FIRMWARE_NAME:Marlin 1.1.9.1 (Github) SOURCE_CODE_URL:https://giERSION:1.0 MACHINE_TYPE:Ender-3 EXTRUDER_COUNT:1 UUID:cede2a2f-4ING_DATA:0
Recv: Cap:BUILD_PERCENT:0
Recv: Cap:SOFTWARE_POWER:0
Communication timeout while idle, trying to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
Send: M21
Communication timeout while idle, trying to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
Send: M105
Recv: Cap:TOGGLE_Lecho:SD init fail
Recv: ok
Send: G91
Recv: ok T:24.10 /0.00 B:25.00 /0.00 @:0 B@:0
Send: G1 Z-10 F200
Recv: ok
Send: G90
Recv: ok
Recv: ok
Send: M105
Recv: ok T:23.98 /0.00 B:25.03 /0.00 @:0 B@:0
Send: M105
Recv: ok T:24.02 /0.00 B:25.00 /0.00 @:0 B@:0
Send: M105
Recv: ok T:24.06 /0.00 B:25.00 /0.00 @:0 B@:0
Send: M105
Recv: ok T:24.02 /0.00 B:25.00 /0.00 @:0 B@:0
Send: M105
Recv: ok T:24.10 /0.00 B:25.00 /0.00 @:0 B@:0
Connection closed, closing down monitor
Changing monitoring state from "Operational" to "Offline"
Changing monitoring state from "Offline" to "Opening serial connection"
Connecting to port /dev/ttyUSB0, baudrate 115200
Changing monitoring state from "Opening serial connection" to "Connecting"
Connected to: Serial<id=0xaf131ed0, open=True>(port='/dev/ttyUSB0', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=10.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
Recv: start
Recv: echo:Marlin 1.1.9.1
Recv: 
Send: N0 M110 N0*125
Recv: echo:start
Recv: echo:Marlin 1.1.9.1
Recv: 
Recv: echo: Last Updated: 2020-06-20 | Auths: 1232
Recv: echo:V56 stored settings retrieves; crc 51462)
Recv: echo:  G21    ; (mm)
Recv: echo:  M149 C ; Units in Cel
Recv: echo:  M203 X500.00 Y500.00 Z10.00 E50.00
Recv: echo:Maximum Acceleraanced: Q<min_segment_time_us> S<min_feedrate> T<min_travel_feedr:Material heatup parameters:
Recv: echo:  M145 S0 H185 B45 F255
Recv: echo: echo:SD init fail
There was a timeout while trying to connect to the printer
Changing monitoring state from "Connecting" to "Offline"
Connection closed, closing down monitor
Changing monitoring state from "Offline" to "Detecting serial connection"
Performing autodetection with 6 port/baudrate candidates: /dev/ttyUSB0@115200, /dev/ttyS4@115200, /dev/ttyS3@115200, /dev/ttyS1@115200, /dev/ttyS0@115200, /dev/ttyS2@115200
Trying port /dev/ttyUSB0, baudrate 115200
Connecting to port /dev/ttyUSB0, baudrate 115200
Handshake attempt #1 with timeout 2.0s
Connected to: Serial<id=0xa50b0230, open=True>(port='/dev/ttyUSB0', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=2.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
Send: N0 M110 N0*125
Recv: start
Changing monitoring state from "Detecting serial connection" to "Operational"
Recv: echo:Marlin 1.1.9.1
Recv: 
Send: N0 M110 N0*125
Recv: echo:start
Recv: echo:Marlin 1.1.9.1
Recv: 
Recv: echo: Last Updated: 2020-06-20 | Author: (thisiskeithb, Ender-3)
Recv: echoecho:V56 stored settings retrieved (656 bytes; crc 51462)
Recv: echo: echo:  M200 D0
Recv: echo:Steps per unit:
Recv: echo:  M92 X80.00 Y80.00 Z40ration (units/s2): P<print_accel> R<retract_accel> T<travel_acce
Recv: echo:  M205 Q20000 S0.00 T0.00 X20.00 Y20.00 Z0.30 E5.00
Recv: echo:H1.54 D76.55
Recv: echo:SD init fail
Communication timeout while idle, trying to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
Send: N1 M115*39
Recv: FIRMWARE_NAME:Marlin 1.1.9.1 (Github) SOURCE_CODE_URL:https://gi:0
Recv: Cap:EEPROM:1
Recv: Cap:VOLUMETRIC:1
Recv: Cap:AUTOREPORT_TEMP:1
Recv: Cap:PROGRCY_PARSER:0
Recv: Cap:AUTOREPORT_SD_STATUS:0
Recv: Cap:THERMAL_PROTECTION:1
Communication timeout while idle, trying to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
Send: M21
Communication timeout while idle, trying to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
Send: M105
Recv: echo:SD init fail
Recv: ok
Send: M155 S2
Recv: ok T:24.02 /0.00 B:25.00 /0.00 @:0 B@:0
Recv: ok
Recv:  T:24.10 /0.00 B:25.00 /0.00 @:0 B@:0
Recv:  T:24.02 /0.00 B:25.00 /0.00 @:0 B@:0
Recv:  T:23.95 /0.00 B:25.00 /0.00 @:0 B@:0
Recv:  T:24.06 /0.00 B:25.00 /0.00 @:0 B@:0
Recv:  T:24.14 /0.00 B:24.96 /0.00 @:0 B@:0
Recv:  T:23.95 /0.00 B:25.00 /0.00 @:0 B@:0
Recv:  T:24.02 /0.00 B:25.00 /0.00 @:0 B@:0
Recv:  T:24.10 /0.00 B:25.00 /0.00 @:0 B@:0
Recv:  T:23.98 /0.00 B:25.00 /0.00 @:0 B@:0
Recv:  T:24.06 /0.00 B:25.00 /0.00 @:0 B@:0
Recv:  T:23.91 /0.00 B:25.00 /0.00 @:0 B@:0
Recv:  T:24.10 /0.00 B:25.00 /0.00 @:0 B@:0
Recv:  T:24.02 /0.00 B:25.00 /0.00 @:0 B@:0
Recv:  T:24.06 /0.00 B:25.00 /0.00 @:0 B@:0
Recv:  T:24.02 /0.00 B:25.00 /0.00 @:0 B@:0
Recv:  T:24.06 /0.00 B:25.00 /0.00 @:0 B@:0
Recv:  T:24.14 /0.00 B:25.00 /0.00 @:0 B@:0
Recv:  T:24.10 /0.00 B:25.00 /0.00 @:0 B@:0
Recv:  T:23.95 /0.00 B:25.00 /0.00 @:0 B@:0
Recv:  T:24.06 /0.00 B:24.96 /0.00 @:0 B@:0
Recv:  T:23.95 /0.00 B:24.96 /0.00 @:0 B@:0
Recv:  T:24.06 /0.00 B:25.00 /0.00 @:0 B@:0
Recv:  T:23.87 /0.00 B:25.00 /0.00 @:0 B@:0
Recv:  T:23.95 /0.00 B:25.00 /0.00 @:0 B@:0
Recv:  T:24.02 /0.00 B:25.00 /0.00 @:0 B@:0
Recv:  T:24.22 /0.00 B:25.00 /0.00 @:0 B@:0
Recv:  T:23.98 /0.00 B:25.00 /0.00 @:0 B@:0
Recv:  T:23.98 /0.00 B:25.00 /0.00 @:0 B@:0
Recv:  T:24.02 /0.00 B:25.00 /0.00 @:0 B@:0
Recv:  T:23.95 /0.00 B:25.00 /0.00 @:0 B@:0
Recv:  T:23.95 /0.00 B:25.00 /0.00 @:0 B@:0