2021-01-05 22:00:41,265 - Changing monitoring state from "Offline" to "Detecting serial connection"
2021-01-05 22:00:41,289 - Performing autodetection with 7 port/baudrate candidates: /dev/ttyACM0@115200, /dev/ttyACM0@250000, /dev/ttyACM0@230400, /dev/ttyACM0@57600, /dev/ttyACM0@38400, /dev/ttyACM0@19200, /dev/ttyACM0@9600
2021-01-05 22:00:41,290 - Trying port /dev/ttyACM0, baudrate 115200
2021-01-05 22:00:41,293 - Connecting to port /dev/ttyACM0, baudrate 115200
2021-01-05 22:00:41,299 - Handshake attempt #1 with timeout 3.0s
2021-01-05 22:00:41,302 - Connected to: Serial<id=0xad7743b0, open=True>(port='/dev/ttyACM0', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=3.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
2021-01-05 22:00:41,304 - Send: N0 M110 N0*125
2021-01-05 22:00:41,305 - Recv: ok
2021-01-05 22:00:41,308 - Changing monitoring state from "Detecting serial connection" to "Operational"
2021-01-05 22:00:41,314 - Send: N0 M110 N0*125
2021-01-05 22:00:41,338 - Recv: ok
2021-01-05 22:00:41,340 - Send: N1 M115*39
2021-01-05 22:00:41,342 - Recv: FIRMWARE_NAME:Marlin 2.0.7.2 (Nov  4 2020 20:37:11) SOURCE_CODE_URL:https://github.com/MarlinFirmware/Marlin PROTOCOL_VERSION:1.0 MACHINE_TYPE:AM8-L by Nico EXTRUDER_COUNT:1 UUID:cede2a2f-41a2-4748-9b12-c55c62f367ff
2021-01-05 22:00:41,348 - Recv: Cap:SERIAL_XON_XOFF:0
2021-01-05 22:00:41,350 - Recv: Cap:BINARY_FILE_TRANSFER:0
2021-01-05 22:00:41,351 - Recv: Cap:EEPROM:1
2021-01-05 22:00:41,355 - Recv: Cap:VOLUMETRIC:1
2021-01-05 22:00:41,357 - Recv: Cap:AUTOREPORT_TEMP:1
2021-01-05 22:00:41,360 - Recv: Cap:PROGRESS:0
2021-01-05 22:00:41,361 - Recv: Cap:PRINT_JOB:1
2021-01-05 22:00:41,363 - Recv: Cap:AUTOLEVEL:1
2021-01-05 22:00:41,365 - Recv: Cap:RUNOUT:0
2021-01-05 22:00:41,366 - Recv: Cap:Z_PROBE:1
2021-01-05 22:00:41,369 - Recv: Cap:LEVELING_DATA:1
2021-01-05 22:00:41,371 - Recv: Cap:BUILD_PERCENT:0
2021-01-05 22:00:41,373 - Recv: Cap:SOFTWARE_POWER:1
2021-01-05 22:00:41,374 - Recv: Cap:TOGGLE_LIGHTS:0
2021-01-05 22:00:41,376 - Recv: Cap:CASE_LIGHT_BRIGHTNESS:0
2021-01-05 22:00:41,377 - Recv: Cap:EMERGENCY_PARSER:0
2021-01-05 22:00:41,378 - Recv: Cap:PROMPT_SUPPORT:0
2021-01-05 22:00:41,380 - Recv: Cap:SDCARD:1
2021-01-05 22:00:41,381 - Recv: Cap:AUTOREPORT_SD_STATUS:0
2021-01-05 22:00:41,383 - Recv: Cap:LONG_FILENAME:1
2021-01-05 22:00:41,385 - Recv: Cap:THERMAL_PROTECTION:1
2021-01-05 22:00:41,386 - Recv: Cap:MOTION_MODES:0
2021-01-05 22:00:41,388 - Recv: Cap:ARCS:1
2021-01-05 22:00:41,389 - Recv: Cap:BABYSTEPPING:1
2021-01-05 22:00:41,390 - Recv: Cap:CHAMBER_TEMPERATURE:0
2021-01-05 22:00:41,392 - Recv: ok
2021-01-05 22:00:41,393 - Send: M21
2021-01-05 22:00:41,411 - Recv: echo:SD card ok
2021-01-05 22:00:41,413 - Recv: ok
2021-01-05 22:00:41,415 - Send: M420V1
2021-01-05 22:00:41,416 - Recv: Bilinear Leveling Grid:
2021-01-05 22:00:41,417 - Recv:       0      1      2      3
2021-01-05 22:00:41,421 - Recv:  0 +0.135 +0.132 +0.020 -0.195
2021-01-05 22:00:41,422 - Recv:  1 +0.077 +0.090 -0.033 -0.258
2021-01-05 22:00:41,423 - Recv:  2 +0.055 +0.072 -0.030 -0.275
2021-01-05 22:00:41,424 - Recv:  3 +0.105 +0.122 +0.002 -0.230
2021-01-05 22:00:41,425 - Recv: 
2021-01-05 22:00:41,426 - Recv: echo:Bed Leveling ON
2021-01-05 22:00:41,427 - Recv: echo:Fade Height 1.00
2021-01-05 22:00:41,429 - Recv: ok
2021-01-05 22:00:41,430 - Send: M851
2021-01-05 22:00:41,432 - Recv: Probe Offset X-28.00 Y-45.00 Z-2.42
2021-01-05 22:00:41,433 - Recv: ok
2021-01-05 22:00:41,434 - Send: M155 S5
2021-01-05 22:00:41,435 - Recv: ok
2021-01-05 22:00:41,436 - Send: M20
2021-01-05 22:00:41,437 - Recv: Begin file list
2021-01-05 22:00:41,445 - Recv: ACCELE~1.GCO 236736
2021-01-05 22:00:41,447 - Recv: ACCELE~2.GCO 236736
2021-01-05 22:00:41,448 - Recv: ANET_F~1.GCO 977070
2021-01-05 22:00:41,449 - Recv: CASE_P~1.GCO 3206337
2021-01-05 22:00:41,451 - Recv: LIN_AD~5.GCO 4375
2021-01-05 22:00:41,452 - Recv: BOWDEN~1.GCO 0
2021-01-05 22:00:41,453 - Recv: COIL_C~1.GCO 5975776
2021-01-05 22:00:41,455 - Recv: COIL_C~2.GCO 6120378
2021-01-05 22:00:41,456 - Recv: COPERC~1.GCO 3778789
2021-01-05 22:00:41,459 - Recv: CUBO40~1.GCO 115593
2021-01-05 22:00:41,461 - Recv: CUBO40~2.GCO 123146
2021-01-05 22:00:41,462 - Recv: FAN_DU~1.GCO 1006477
2021-01-05 22:00:41,464 - Recv: FAN_DU~2.GCO 808771
2021-01-05 22:00:41,464 - Recv: LIN_AD~1.GCO 8966
2021-01-05 22:00:41,466 - Recv: LIN_AD~2.GCO 8238
2021-01-05 22:00:41,467 - Recv: LIN_AD~3.GCO 10563
2021-01-05 22:00:41,468 - Recv: LIN_AD~4.GCO 18118
2021-01-05 22:00:41,469 - Recv: LI8EC1~1.GCO 10477
2021-01-05 22:00:41,470 - Recv: LITOFA~1.GCO 13941198
2021-01-05 22:00:41,472 - Recv: PROTEZ~1.GCO 204436
2021-01-05 22:00:41,473 - Recv: PROTEZ~2.GCO 354036
2021-01-05 22:00:41,474 - Recv: SCATOL~1.GCO 1606320
2021-01-05 22:00:41,476 - Recv: STAFFA~1.GCO 728411
2021-01-05 22:00:41,477 - Recv: STAFFA~2.GCO 1463019
2021-01-05 22:00:41,478 - Recv: SUPORT~1.GCO 780155
2021-01-05 22:00:41,479 - Recv: SUPPOR~1.GCO 2119498
2021-01-05 22:00:41,480 - Recv: TAPPO_~1.GCO 728991
2021-01-05 22:00:41,481 - Recv: TEST_B~1.GCO 370953
2021-01-05 22:00:41,482 - Recv: TEST_L~1.GCO 7976
2021-01-05 22:00:41,484 - Recv: CASE_R~1.GCO 14968609
2021-01-05 22:00:41,485 - Recv: End file list
2021-01-05 22:00:41,487 - Recv: ok
2021-01-05 22:00:46,474 - Recv:  T:18.39 /0.00 B:17.14 /0.00 @:0 B@:0
2021-01-05 22:00:51,442 - Recv:  T:18.39 /0.00 B:17.32 /0.00 @:0 B@:0
2021-01-05 22:00:56,489 - Recv:  T:18.21 /0.00 B:17.32 /0.00 @:0 B@:0
2021-01-05 22:01:11,895 - Recv:  T:18.39 /0.00 B:17.14 /0.00 @:0 B@:0
2021-01-05 22:01:16,895 - Recv:  T:18.57 /0.00 B:17.32 /0.00 @:0 B@:0
2021-01-05 22:01:21,895 - Recv:  T:18.39 /0.00 B:17.32 /0.00 @:0 B@:0
2021-01-05 22:01:26,896 - Recv:  T:18.39 /0.00 B:17.14 /0.00 @:0 B@:0
2021-01-05 22:01:31,895 - Recv:  T:18.39 /0.00 B:17.32 /0.00 @:0 B@:0
2021-01-05 22:01:36,905 - Recv:  T:18.39 /0.00 B:17.32 /0.00 @:0 B@:0
2021-01-05 22:01:41,899 - Recv:  T:18.21 /0.00 B:17.32 /0.00 @:0 B@:0
2021-01-05 22:01:46,905 - Recv:  T:18.04 /0.00 B:17.50 /0.00 @:0 B@:0
2021-01-05 22:01:51,909 - Recv:  T:18.21 /0.00 B:17.14 /0.00 @:0 B@:0
2021-01-05 22:01:56,912 - Recv:  T:18.04 /0.00 B:17.32 /0.00 @:0 B@:0
2021-01-05 22:02:01,914 - Recv:  T:18.04 /0.00 B:17.32 /0.00 @:0 B@:0
2021-01-05 22:02:06,916 - Recv:  T:18.21 /0.00 B:17.14 /0.00 @:0 B@:0
2021-01-05 22:02:11,917 - Recv:  T:18.04 /0.00 B:16.96 /0.00 @:0 B@:0
2021-01-05 22:02:16,918 - Recv:  T:18.21 /0.00 B:17.32 /0.00 @:0 B@:0
2021-01-05 22:02:21,919 - Recv:  T:18.21 /0.00 B:17.14 /0.00 @:0 B@:0
2021-01-05 22:02:26,919 - Recv:  T:18.04 /0.00 B:17.14 /0.00 @:0 B@:0
2021-01-05 22:02:31,920 - Recv:  T:18.04 /0.00 B:17.32 /0.00 @:0 B@:0
2021-01-05 22:02:36,920 - Recv:  T:18.04 /0.00 B:17.14 /0.00 @:0 B@:0
2021-01-05 22:02:41,921 - Recv:  T:18.04 /0.00 B:17.14 /0.00 @:0 B@:0
2021-01-05 22:02:46,919 - Recv:  T:18.04 /0.00 B:17.14 /0.00 @:0 B@:0
2021-01-05 22:02:51,917 - Recv:  T:17.86 /0.00 B:17.50 /0.00 @:0 B@:0
2021-01-05 22:02:56,915 - Recv:  T:17.86 /0.00 B:17.14 /0.00 @:0 B@:0
2021-01-05 22:03:01,913 - Recv:  T:17.86 /0.00 B:17.32 /0.00 @:0 B@:0
2021-01-05 22:03:06,911 - Recv:  T:17.86 /0.00 B:17.32 /0.00 @:0 B@:0
2021-01-05 22:03:11,910 - Recv:  T:17.86 /0.00 B:17.32 /0.00 @:0 B@:0
2021-01-05 22:03:16,909 - Recv:  T:18.04 /0.00 B:17.14 /0.00 @:0 B@:0
2021-01-05 22:03:21,907 - Recv:  T:17.86 /0.00 B:17.32 /0.00 @:0 B@:0
2021-01-05 22:03:26,907 - Recv:  T:18.04 /0.00 B:17.14 /0.00 @:0 B@:0
2021-01-05 22:03:31,906 - Recv:  T:17.86 /0.00 B:17.14 /0.00 @:0 B@:0
2021-01-05 22:03:35,077 - Changing monitoring state from "Operational" to "Starting"
2021-01-05 22:03:35,140 - Send: N0 M110 N0*125
2021-01-05 22:03:35,144 - Recv: ok
2021-01-05 22:03:35,158 - Send: N1 M221 T0 S100.00*11
2021-01-05 22:03:35,160 - Recv: ok
2021-01-05 22:03:35,165 - Send: N2 M140 S70.00*126
2021-01-05 22:03:35,167 - Recv: ok
2021-01-05 22:03:35,171 - Send: N3 M190 S70.00*114
2021-01-05 22:03:35,177 - Recv:  T:17.86 /0.00 B:17.50 /70.00 @:0 B@:0 W:?
2021-01-05 22:03:36,294 - Recv: echo: cold extrusion prevented
2021-01-05 22:03:36,903 - Recv: Error:Printer halted. kill() called!
2021-01-05 22:03:36,916 - Changing monitoring state from "Starting" to "Error: Printer halted. kill() called!"
2021-01-05 22:03:36,966 - Changing monitoring state from "Error: Printer halted. kill() called!" to "Offline (Error: Printer halted. kill() called!)"
2021-01-05 22:03:36,981 - Connection closed, closing down monitor