Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Oct 30 12:29:59 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 Done bringing up all configured video devices i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 11:02:28 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 11:04:00 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 11:05:31 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 11:07:03 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 11:08:34 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 11:10:06 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 11:11:37 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 11:13:09 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 11:14:40 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 11:16:12 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 11:17:43 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 11:19:15 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 11:20:46 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 11:22:18 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 11:23:49 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 11:25:21 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 11:26:52 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 11:28:24 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 11:29:55 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 11:31:27 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 11:32:58 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 11:34:30 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 11:36:01 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 11:37:32 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 11:39:04 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 11:40:35 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 11:42:07 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 11:43:38 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 11:45:10 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 11:46:41 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 11:48:13 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 11:49:44 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 11:51:16 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 11:52:47 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 11:54:19 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 11:55:50 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 11:57:22 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 11:58:53 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 12:00:25 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 12:01:56 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 12:03:28 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 12:04:59 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 12:04:38 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 12:08:15 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 12:09:44 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 12:11:16 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 12:12:47 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 12:14:19 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 12:15:50 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 12:17:22 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 12:18:53 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 12:20:25 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 12:21:56 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 12:23:28 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 12:24:59 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 12:26:31 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 12:28:02 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 12:29:34 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 12:31:05 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 12:32:37 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 12:34:08 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 12:35:40 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 12:37:11 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 12:38:43 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 12:40:14 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 12:41:46 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 12:43:17 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 12:44:49 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 12:46:20 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 12:47:52 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 12:49:23 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 12:50:55 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 12:52:26 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 12:53:58 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 12:55:29 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 12:57:01 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 12:58:32 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 13:00:04 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 13:01:35 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 13:03:07 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 13:04:38 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 13:06:10 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 13:07:41 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 13:09:13 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 13:10:44 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 13:12:16 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 13:13:47 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 13:15:19 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 13:16:50 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 13:18:22 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 13:19:53 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 13:21:25 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 13:22:56 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 13:24:28 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 13:25:59 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 13:27:31 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 13:29:02 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 13:30:34 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 13:32:05 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 13:33:37 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 13:35:08 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 13:36:40 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 13:38:11 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 13:39:43 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 13:41:14 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 13:42:46 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 13:44:17 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 13:45:49 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 13:50:30 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 13:52:01 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 14:00:50 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 14:02:21 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 14:05:03 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 14:27:05 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 14:29:30 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 14:31:01 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 14:32:33 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 14:34:05 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 14:35:36 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 14:37:08 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 14:38:39 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 14:40:11 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 14:41:42 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 14:43:14 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 14:44:45 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 14:46:17 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 14:47:48 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 14:48:52 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 14:55:15 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 14:56:46 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 15:09:02 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 15:10:34 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 15:14:18 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 15:15:49 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 16:05:54 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly set USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, starting MJPG-streamer with the first found video device: /dev/video10 <13>Jan 18 16:07:26 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video10 MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bringing up all configured video devices Scanning again in two minutes Terminated Goodbye...