2020-06-20 07:43:41,849 - Changing monitoring state from "Offline" to "Detecting serial port"
2020-06-20 07:43:41,968 - Serial port list: [u'/dev/ttyUSB0']
2020-06-20 07:43:41,968 - Connecting to: /dev/ttyUSB0
2020-06-20 07:43:42,061 - Changing monitoring state from "Detecting serial port" to "Opening serial port"
2020-06-20 07:43:42,065 - Connected to: Serial<id=0x6b4d63d0, open=True>(port='/dev/ttyUSB0', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=10.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
2020-06-20 07:43:42,067 - Starting baud rate detection...
2020-06-20 07:43:42,068 - Changing monitoring state from "Opening serial port" to "Detecting baudrate"
2020-06-20 07:43:43,076 - Trying baudrate: 115200
2020-06-20 07:43:43,094 - Recv: start
2020-06-20 07:43:43,095 - Send: N0 M110 N0*125
2020-06-20 07:43:43,103 - Changing monitoring state from "Detecting baudrate" to "Operational"
2020-06-20 07:43:43,125 - Recv: echo: External Reset
2020-06-20 07:43:43,130 - Recv: Marlin Ver 1.70.1 BL
2020-06-20 07:43:43,150 - Send: N0 M110 N0*125
2020-06-20 07:43:43,151 - Recv: 
2020-06-20 07:43:43,154 - Recv: echo: Last Updated: 2019-09-04 | Author: Ender-5 Plus
2020-06-20 07:43:43,158 - Recv: echo:Compiled: Sep  5 2019
2020-06-20 07:43:43,168 - Recv: echo: Free Memory: 1460  PlannerBufferBytes: 1232
2020-06-20 07:43:43,173 - Recv: echo:V41 stored settings retrieved (526 bytes; crc 23584)
2020-06-20 07:43:43,178 - Recv: echo:  G21    ; Units in mm
2020-06-20 07:43:43,181 - Recv: echo:  M149 C ; Units in Celsius
2020-06-20 07:43:43,186 - Recv: 
2020-06-20 07:43:43,189 - Recv: echo:Filament settings: Disabled
2020-06-20 07:43:43,195 - Recv: echo:  M200 D1.75
2020-06-20 07:43:43,198 - Recv: echo:  M200 D0
2020-06-20 07:43:43,202 - Recv: echo:Steps per unit:
2020-06-20 07:43:43,207 - Recv: echo:  M92 X80.00 Y80.00 Z800.00 E93.00
2020-06-20 07:43:43,210 - Recv: echo:Maximum feedrates (units/s):
2020-06-20 07:43:43,215 - Recv: echo:  M203 X300.00 Y300.00 Z5.00 E25.00
2020-06-20 07:43:43,219 - Recv: echo:Maximum Acceleration (units/s2):
2020-06-20 07:43:43,223 - Recv: echo:  M201 X500 Y500 Z100 E1000
2020-06-20 07:43:43,226 - Recv: echo:Acceleration (units/s2): P<print_accel> R<retract_accel> T<travel_accel>
2020-06-20 07:43:43,229 - Recv: echo:  M204 P500.00 R500.00 T1000.00
2020-06-20 07:43:43,233 - Recv: echo:Advanced: S<min_feedrate> T<min_travel_feedrate> B<min_segment_time_ms> X<max_xy_jerk> Z<max_z_jerk> E<max_e_jerk>
2020-06-20 07:43:43,237 - Recv: echo:  M205 S0.00 T0.00 B20000 X10.00 Y10.00 Z0.40 E5.00
2020-06-20 07:43:43,242 - Recv: echo:Home offset:
2020-06-20 07:43:43,245 - Recv: echo:  M206 X0.00 Y0.00 Z0.00
2020-06-20 07:43:43,248 - Recv: echo:Auto Bed Leveling:
2020-06-20 07:43:43,252 - Recv: echo:  M420 S0 Z0.00
2020-06-20 07:43:43,258 - Recv: echo:PID settings:
2020-06-20 07:43:43,263 - Recv: echo:  M301 P14.72 I0.89 D61.22
2020-06-20 07:43:43,266 - Recv: echo:Z-Probe Offset (mm):
2020-06-20 07:43:43,268 - Recv: echo:  M851 Z-1.60
2020-06-20 07:43:47,519 - Recv: echo:SD card ok
2020-06-20 07:43:47,534 - Recv: Init power off infomation.
2020-06-20 07:43:47,537 - Recv: size:
2020-06-20 07:43:47,541 - Recv: 585
2020-06-20 07:43:47,634 - Recv: init valid:
2020-06-20 07:43:47,638 - Recv: 0
2020-06-20 07:43:47,640 - Recv: 0
2020-06-20 07:43:47,644 - Recv: echo:V41 stored settings retrieved (526 bytes; crc 23584)
2020-06-20 07:43:47,646 - Recv: echo:  G21    ; Units in mm
2020-06-20 07:43:47,650 - Recv: echo:  M149 C ; Units in Celsius
2020-06-20 07:43:47,654 - Recv: 
2020-06-20 07:43:47,657 - Recv: echo:Filament settings: Disabled
2020-06-20 07:43:47,660 - Recv: echo:  M200 D1.75
2020-06-20 07:43:47,663 - Recv: echo:  M200 D0
2020-06-20 07:43:47,667 - Recv: echo:Steps per unit:
2020-06-20 07:43:47,669 - Recv: echo:  M92 X80.00 Y80.00 Z800.00 E93.00
2020-06-20 07:43:47,672 - Recv: echo:Maximum feedrates (units/s):
2020-06-20 07:43:47,676 - Recv: echo:  M203 X300.00 Y300.00 Z5.00 E25.00
2020-06-20 07:43:47,679 - Recv: echo:Maximum Acceleration (units/s2):
2020-06-20 07:43:47,684 - Recv: echo:  M201 X500 Y500 Z100 E1000
2020-06-20 07:43:47,687 - Recv: echo:Acceleration (units/s2): P<print_accel> R<retract_accel> T<travel_accel>
2020-06-20 07:43:47,699 - Recv: echo:  M204 P500.00 R500.00 T1000.00
2020-06-20 07:43:47,703 - Recv: echo:Advanced: S<min_feedrate> T<min_travel_feedrate> B<min_segment_time_ms> X<max_xy_jerk> Z<max_z_jerk> E<max_e_jerk>
2020-06-20 07:43:47,705 - Recv: echo:  M205 S0.00 T0.00 B20000 X10.00 Y10.00 Z0.40 E5.00
2020-06-20 07:43:47,707 - Recv: echo:Home offset:
2020-06-20 07:43:47,709 - Recv: echo:  M206 X0.00 Y0.00 Z0.00
2020-06-20 07:43:47,711 - Recv: echo:Auto Bed Leveling:
2020-06-20 07:43:47,713 - Recv: echo:  M420 S0 Z0.00
2020-06-20 07:43:47,714 - Recv: echo:PID settings:
2020-06-20 07:43:47,716 - Recv: echo:  M301 P14.72 I0.89 D61.22
2020-06-20 07:43:47,718 - Recv: echo:Z-Probe Offset (mm):
2020-06-20 07:43:47,720 - Recv: echo:  M851 Z-1.60
2020-06-20 07:43:47,722 - Recv: echo:enqueueing "M420 S1"
2020-06-20 07:43:47,723 - Recv: ***Initing card is OK***
2020-06-20 07:43:47,726 - Recv: echo:SD card ok
2020-06-20 07:43:47,938 - Recv: ===Initing RTS has finished===
2020-06-20 07:43:47,954 - Recv: echo:Bed Leveling On
2020-06-20 07:43:47,956 - Recv: echo:Fade Height Off
2020-06-20 07:43:47,986 - Recv: ok
2020-06-20 07:43:47,988 - Send: N1 M115*39
2020-06-20 07:43:48,017 - Recv: ok
2020-06-20 07:43:48,020 - Send: N2 M21*18
2020-06-20 07:43:48,090 - Recv: Error:Line Number is not Last Line Number+1, Last Line: 0
2020-06-20 07:43:48,092 - Recv: Resend: 1
2020-06-20 07:43:48,096 - Recv: ok
2020-06-20 07:43:48,098 - Recv: FIRMWARE_NAME:Marlin Ver 1.70.1 BL (Creality3D) SOURCE_CODE_URL:https://github.com/MarlinFirmware/Marlin PROTOCOL_VERSION:1.0 MACHINE_TYPE:Ender-5 Plus EXTRUDER_COUNT:1 UUID:cede2a2f-41a2-4748-9b12-c55c62f367ff
2020-06-20 07:43:48,102 - Send: N1 M115*39
2020-06-20 07:43:48,107 - Recv: Cap:EEPROM:1
2020-06-20 07:43:48,110 - Recv: Cap:AUTOREPORT_TEMP:1
2020-06-20 07:43:48,113 - Recv: Cap:PROGRESS:0
2020-06-20 07:43:48,115 - Recv: Cap:PRINT_JOB:1
2020-06-20 07:43:48,117 - Recv: Cap:AUTOLEVEL:1
2020-06-20 07:43:48,118 - Recv: Cap:Z_PROBE:1
2020-06-20 07:43:48,120 - Recv: Cap:LEVELING_DATA:1
2020-06-20 07:43:48,123 - Recv: Cap:SOFTWARE_POWER:0
2020-06-20 07:43:48,125 - Recv: Cap:TOGGLE_LIGHTS:0
2020-06-20 07:43:48,127 - Recv: Cap:CASE_LIGHT_BRIGHTNESS:0
2020-06-20 07:43:48,129 - Recv: Cap:EMERGENCY_PARSER:0
2020-06-20 07:43:48,130 - Recv: ok
2020-06-20 07:43:48,133 - Send: N2 M21*18
2020-06-20 07:43:48,157 - Recv: FIRMWARE_NAME:Marlin Ver 1.70.1 BL (Creality3D) SOURCE_CODE_URL:https://github.com/MarlinFirmware/Marlin PROTOCOL_VERSION:1.0 MACHINE_TYPE:Ender-5 Plus EXTRUDER_COUNT:1 UUID:cede2a2f-41a2-4748-9b12-c55c62f367ff
2020-06-20 07:43:48,161 - Recv: Cap:EEPROM:1
2020-06-20 07:43:48,163 - Recv: Cap:AUTOREPORT_TEMP:1
2020-06-20 07:43:48,167 - Recv: Cap:PROGRESS:0
2020-06-20 07:43:48,169 - Recv: Cap:PRINT_JOB:1
2020-06-20 07:43:48,172 - Recv: Cap:AUTOLEVEL:1
2020-06-20 07:43:48,173 - Recv: Cap:Z_PROBE:1
2020-06-20 07:43:48,175 - Recv: Cap:LEVELING_DATA:1
2020-06-20 07:43:48,177 - Recv: Cap:SOFTWARE_POWER:0
2020-06-20 07:43:48,179 - Recv: Cap:TOGGLE_LIGHTS:0
2020-06-20 07:43:48,181 - Recv: Cap:CASE_LIGHT_BRIGHTNESS:0
2020-06-20 07:43:48,183 - Recv: Cap:EMERGENCY_PARSER:0
2020-06-20 07:43:48,184 - Recv: ok
2020-06-20 07:43:48,187 - Send: M20
2020-06-20 07:43:48,189 - Recv: echo:SD card ok
2020-06-20 07:43:48,191 - Recv: Init power off infomation.
2020-06-20 07:43:48,192 - Recv: size:
2020-06-20 07:43:48,194 - Recv: 585
2020-06-20 07:43:48,205 - Recv: init valid:
2020-06-20 07:43:48,206 - Recv: 0
2020-06-20 07:43:48,208 - Recv: 0
2020-06-20 07:43:48,210 - Recv: ok
2020-06-20 07:43:48,212 - Send: M105
2020-06-20 07:43:48,236 - Recv: Begin file list
2020-06-20 07:43:48,284 - Recv: GOU~1.GCO 4641854
2020-06-20 07:43:48,286 - Recv: PIKAQI~1.GCO 1635116
2020-06-20 07:43:48,287 - Recv: TUZI~1.GCO 4712377
2020-06-20 07:43:48,395 - Recv: echo:Cannot open subdir AMD64
2020-06-20 07:43:48,397 - Recv: echo:Cannot open subdir I386
2020-06-20 07:43:48,399 - Recv: End file list
2020-06-20 07:43:48,402 - Recv: ok
2020-06-20 07:43:48,406 - Send: M155 S0
2020-06-20 07:43:48,443 - Recv: ok == T:25.23 /0.00 == B:34.97 /0.00 @:0 B@:0
2020-06-20 07:43:48,450 - Send: M155 S0
2020-06-20 07:43:48,480 - Recv: ok
2020-06-20 07:43:48,491 - Recv: ok
2020-06-20 07:43:53,108 - Send: M105
2020-06-20 07:43:53,125 - Recv: ok == T:25.28 /0.00 == B:34.74 /0.00 @:0 B@:0
2020-06-20 07:43:58,109 - Send: M105
2020-06-20 07:43:58,128 - Recv: ok == T:25.28 /0.00 == B:34.43 /0.00 @:0 B@:0
2020-06-20 07:44:03,110 - Send: M105
2020-06-20 07:44:03,129 - Recv: ok == T:25.17 /0.00 == B:34.43 /0.00 @:0 B@:0
2020-06-20 07:44:08,111 - Send: M105
2020-06-20 07:44:08,130 - Recv: ok == T:25.00 /0.00 == B:34.35 /0.00 @:0 B@:0
2020-06-20 07:44:13,112 - Send: M105
2020-06-20 07:44:13,131 - Recv: ok == T:24.88 /0.00 == B:34.30 /0.00 @:0 B@:0
2020-06-20 07:44:18,114 - Send: M105
2020-06-20 07:44:18,133 - Recv: ok == T:24.92 /0.00 == B:34.09 /0.00 @:0 B@:0
2020-06-20 07:44:23,114 - Send: M105
2020-06-20 07:44:23,133 - Recv: ok == T:24.73 /0.00 == B:33.93 /0.00 @:0 B@:0
2020-06-20 07:44:28,116 - Send: M105
2020-06-20 07:44:28,135 - Recv: ok == T:24.80 /0.00 == B:34.01 /0.00 @:0 B@:0
2020-06-20 07:44:29,012 - Changing monitoring state from "Operational" to "Starting"
2020-06-20 07:44:29,051 - Send: N0 M110 N0*125
2020-06-20 07:44:29,062 - Recv: ok
2020-06-20 07:44:29,068 - Changing monitoring state from "Starting" to "Printing"
2020-06-20 07:44:29,083 - Send: N1 M107*36
2020-06-20 07:44:29,094 - Recv: ok
2020-06-20 07:44:29,100 - Send: N2 M190 S65*89
2020-06-20 07:44:31,107 - Recv: echo:busy: processing
2020-06-20 07:44:31,118 - Printer seems to support the busy protocol, will adjust timeouts and set busy interval accordingly
2020-06-20 07:44:33,120 - Recv: echo:busy: processing
2020-06-20 07:44:35,117 - Recv: echo:busy: processing
2020-06-20 07:44:37,114 - Recv: echo:busy: processing
2020-06-20 07:44:39,112 - Recv: echo:busy: processing
2020-06-20 07:44:41,108 - Recv: echo:busy: processing
2020-06-20 07:44:43,105 - Recv: echo:busy: processing
2020-06-20 07:44:45,118 - Recv: echo:busy: processing
2020-06-20 07:44:47,116 - Recv: echo:busy: processing
2020-06-20 07:44:49,113 - Recv: echo:busy: processing
2020-06-20 07:44:51,110 - Recv: echo:busy: processing
2020-06-20 07:44:53,107 - Recv: echo:busy: processing
2020-06-20 07:44:55,105 - Recv: echo:busy: processing
2020-06-20 07:44:57,118 - Recv: echo:busy: processing
2020-06-20 07:44:59,115 - Recv: echo:busy: processing
2020-06-20 07:45:01,112 - Recv: echo:busy: processing
2020-06-20 07:45:03,110 - Recv: echo:busy: processing
2020-06-20 07:45:05,108 - Recv: echo:busy: processing
2020-06-20 07:45:07,105 - Recv: echo:busy: processing
2020-06-20 07:45:09,103 - Recv: echo:busy: processing
2020-06-20 07:45:11,115 - Recv: echo:busy: processing
2020-06-20 07:45:13,113 - Recv: echo:busy: processing
2020-06-20 07:45:15,110 - Recv: echo:busy: processing
2020-06-20 07:45:17,108 - Recv: echo:busy: processing
2020-06-20 07:45:19,105 - Recv: echo:busy: processing
2020-06-20 07:45:21,103 - Recv: echo:busy: processing
2020-06-20 07:45:23,116 - Recv: echo:busy: processing
2020-06-20 07:45:25,113 - Recv: echo:busy: processing
2020-06-20 07:45:27,111 - Recv: echo:busy: processing
2020-06-20 07:45:29,108 - Recv: echo:busy: processing
2020-06-20 07:45:31,106 - Recv: echo:busy: processing
2020-06-20 07:45:33,104 - Recv: echo:busy: processing
2020-06-20 07:45:35,117 - Recv: echo:busy: processing
2020-06-20 07:45:37,114 - Recv: echo:busy: processing
2020-06-20 07:45:39,112 - Recv: echo:busy: processing
2020-06-20 07:45:41,109 - Recv: echo:busy: processing
2020-06-20 07:45:43,107 - Recv: echo:busy: processing
2020-06-20 07:45:45,104 - Recv: echo:busy: processing
2020-06-20 07:45:47,117 - Recv: echo:busy: processing
2020-06-20 07:45:49,115 - Recv: echo:busy: processing
2020-06-20 07:45:51,112 - Recv: echo:busy: processing
2020-06-20 07:45:53,109 - Recv: echo:busy: processing
2020-06-20 07:45:55,107 - Recv: echo:busy: processing
2020-06-20 07:45:57,105 - Recv: echo:busy: processing
2020-06-20 07:45:59,102 - Recv: echo:busy: processing
2020-06-20 07:46:01,115 - Recv: echo:busy: processing
2020-06-20 07:46:03,113 - Recv: echo:busy: processing
2020-06-20 07:46:05,110 - Recv: echo:busy: processing
2020-06-20 07:46:07,108 - Recv: echo:busy: processing
2020-06-20 07:46:09,105 - Recv: echo:busy: processing
2020-06-20 07:46:11,103 - Recv: echo:busy: processing
2020-06-20 07:46:13,116 - Recv: echo:busy: processing
2020-06-20 07:46:15,115 - Recv: echo:busy: processing
2020-06-20 07:46:17,111 - Recv: echo:busy: processing
2020-06-20 07:46:19,108 - Recv: echo:busy: processing
2020-06-20 07:46:21,106 - Recv: echo:busy: processing
2020-06-20 07:46:23,103 - Recv: echo:busy: processing
2020-06-20 07:46:25,101 - Recv: echo:busy: processing
2020-06-20 07:46:27,115 - Recv: echo:busy: processing
2020-06-20 07:46:29,113 - Recv: echo:busy: processing
2020-06-20 07:46:31,110 - Recv: echo:busy: processing
2020-06-20 07:46:33,108 - Recv: echo:busy: processing
2020-06-20 07:46:35,104 - Recv: echo:busy: processing
2020-06-20 07:46:37,101 - Recv: echo:busy: processing
2020-06-20 07:46:39,115 - Recv: echo:busy: processing
2020-06-20 07:46:41,113 - Recv: echo:busy: processing
2020-06-20 07:46:43,110 - Recv: echo:busy: processing
2020-06-20 07:46:45,107 - Recv: echo:busy: processing
2020-06-20 07:46:47,105 - Recv: echo:busy: processing
2020-06-20 07:46:49,102 - Recv: echo:busy: processing
2020-06-20 07:46:51,115 - Recv: echo:busy: processing
2020-06-20 07:46:53,113 - Recv: echo:busy: processing
2020-06-20 07:46:55,110 - Recv: echo:busy: processing
2020-06-20 07:46:57,108 - Recv: echo:busy: processing
2020-06-20 07:46:59,105 - Recv: echo:busy: processing
2020-06-20 07:47:01,102 - Recv: echo:busy: processing
2020-06-20 07:47:03,100 - Recv: echo:busy: processing
2020-06-20 07:47:05,113 - Recv: echo:busy: processing
2020-06-20 07:47:07,111 - Recv: echo:busy: processing
2020-06-20 07:47:09,108 - Recv: echo:busy: processing
2020-06-20 07:47:11,105 - Recv: echo:busy: processing
2020-06-20 07:47:13,102 - Recv: echo:busy: processing
2020-06-20 07:47:15,100 - Recv: echo:busy: processing
2020-06-20 07:47:17,113 - Recv: echo:busy: processing
2020-06-20 07:47:19,110 - Recv: echo:busy: processing
2020-06-20 07:47:21,109 - Recv: echo:busy: processing
2020-06-20 07:47:23,106 - Recv: echo:busy: processing
2020-06-20 07:47:25,104 - Recv: echo:busy: processing
2020-06-20 07:47:27,101 - Recv: echo:busy: processing
2020-06-20 07:47:29,114 - Recv: echo:busy: processing
2020-06-20 07:47:30,335 - Recv: Error:Heating failed, system stopped! Heater_ID: bed
2020-06-20 07:47:30,337 - Recv: Error:Printer halted. kill() called!
2020-06-20 07:47:30,349 - WARNING! Received an error from the printer's firmware, ignoring that as configured but you might want to investigate what happened here! Error: Heating failed, system stopped! Heater_ID: bed - Printer halted. kill() called!
2020-06-20 07:48:39,120 - Unexpected error while reading serial port, please consult octoprint.log for details: SerialException: 'device reports readiness to read but returned no data (device disconnected or multiple access on port?)' @ comm.py:_readline:2823
2020-06-20 07:48:39,128 - Please see https://faq.octoprint.org/serialerror for possible reasons of this.
2020-06-20 07:48:39,153 - Changing monitoring state from "Printing" to "Offline (Error: SerialException: 'device reports readiness to read but returned no data (device disconnected or multiple access on port?)' @ comm.py:_readline:2823)"
2020-06-20 07:48:39,167 - Connection closed, closing down monitor