2019-09-20 00:09:15,236 - Connecting to: /dev/ttyACM0
2019-09-20 00:09:15,254 - Changing monitoring state from "Offline" to "Opening serial port"
2019-09-20 00:09:15,258 - Connected to: Serial<id=0x6a2daa90, open=True>(port='/dev/ttyACM0', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=10.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
2019-09-20 00:09:15,259 - Changing monitoring state from "Opening serial port" to "Connecting"
2019-09-20 00:09:15,272 - Send: N0 M110 N0*125
2019-09-20 00:09:16,269 - Recv: start
2019-09-20 00:09:16,274 - Send: N0 M110 N0*125
2019-09-20 00:09:16,277 - Recv: echo: 3.8.0-2684
2019-09-20 00:09:16,279 - Recv: echo: Last Updated: Sep  6 2019 19:51:28 | Author: (none, default config)
2019-09-20 00:09:16,281 - Recv: Compiled: Sep  6 2019
2019-09-20 00:09:16,283 - Recv: echo: Free Memory: 2276  PlannerBufferBytes: 1392
2019-09-20 00:09:16,284 - Recv: echo:Stored settings retrieved
2019-09-20 00:09:16,287 - Recv: adc_init
2019-09-20 00:09:16,628 - Recv: FSensor ENABLED
2019-09-20 00:09:16,641 - Recv: echo:SD card ok
2019-09-20 00:09:17,878 - Recv: ok
2019-09-20 00:09:17,896 - Changing monitoring state from "Connecting" to "Operational"
2019-09-20 00:09:17,910 - Send: N0 M110 N0*125
2019-09-20 00:09:17,921 - Recv: ok
2019-09-20 00:09:17,931 - Send: N1 M115*39
2019-09-20 00:09:17,961 - Recv: FIRMWARE_NAME:Prusa-Firmware 3.8.0 based on Marlin FIRMWARE_URL:https://github.com/prusa3d/Prusa-Firmware PROTOCOL_VERSION:1.0 MACHINE_TYPE:Prusa i3 MK2.5S EXTRUDER_COUNT:1 UUID:00000000-0000-0000-0000-000000000000
2019-09-20 00:09:17,970 - Recv: ok
2019-09-20 00:09:17,980 - Send: M20
2019-09-20 00:09:17,994 - Recv: Begin file list
2019-09-20 00:09:18,172 - Recv: 4H14M_~1.GCO 2153654
2019-09-20 00:09:18,209 - Recv: 50MM_0~1.GCO 2509714
2019-09-20 00:09:18,213 - Recv: End file list
2019-09-20 00:09:18,216 - Recv: ok
2019-09-20 00:09:22,894 - Send: M105
2019-09-20 00:09:22,904 - Recv: ok T:25.0 /0.0 B:25.0 /0.0 T0:25.0 /0.0 @:0 B@:0 P:26.0
2019-09-20 00:09:23,789 - Recv: MMU => 'start'
2019-09-20 00:09:23,791 - Recv: MMU <= 'S1'
2019-09-20 00:09:27,897 - Send: M105
2019-09-20 00:09:27,910 - Recv: ok T:25.0 /0.0 B:25.0 /0.0 T0:25.0 /0.0 @:0 B@:0 P:25.5
2019-09-20 00:09:28,860 - Recv: MMU => '105ok'
2019-09-20 00:09:28,867 - Recv: MMU <= 'S2'
2019-09-20 00:09:28,878 - Recv: MMU => '297ok'
2019-09-20 00:09:28,880 - Recv: MMU version valid
2019-09-20 00:09:28,882 - Recv: MMU <= 'M1'
2019-09-20 00:09:28,887 - Recv: MMU - ENABLED
2019-09-20 00:09:32,898 - Send: M105
2019-09-20 00:09:32,914 - Recv: ok T:25.0 /0.0 B:25.0 /0.0 T0:25.0 /0.0 @:0 B@:0 P:25.5
2019-09-20 00:09:37,900 - Send: M105
2019-09-20 00:09:37,918 - Recv: ok T:25.1 /0.0 B:25.0 /0.0 T0:25.1 /0.0 @:0 B@:0 P:25.5
2019-09-20 00:09:38,070 - Send: M104 S215
2019-09-20 00:09:38,089 - Recv: ok
2019-09-20 00:09:38,465 - Send: M140 S60
2019-09-20 00:09:38,483 - Recv: ok
2019-09-20 00:09:39,640 - Recv: start
2019-09-20 00:09:39,644 - Printer sent 'start' while already operational. External reset? Resetting line numbers to be on the safe side
2019-09-20 00:09:39,667 - Send: N0 M110 N0*125
2019-09-20 00:09:39,671 - Recv: echo: 3.8.0-2684
2019-09-20 00:09:39,677 - Recv: echo: Last Updated: Sep  6 2019 19:51:28 | Author: (none, default config)
2019-09-20 00:09:39,681 - Recv: Compiled: Sep  6 2019
2019-09-20 00:09:39,686 - Recv: echo: Free Memory: 2276  PlannerBufferBytes: 1392
2019-09-20 00:09:39,689 - Recv: echo:Stored settings retrieved
2019-09-20 00:09:39,693 - Recv: adc_init
2019-09-20 00:09:40,009 - Recv: FSensor ENABLED
2019-09-20 00:09:40,017 - Recv: echo:SD card ok
2019-09-20 00:09:41,259 - Recv: ok
2019-09-20 00:09:41,267 - Send: N0 M110 N0*125
2019-09-20 00:09:41,283 - Recv: ok
2019-09-20 00:09:42,902 - Send: M105
2019-09-20 00:09:42,914 - Recv: ok T:25.4 /0.0 B:25.0 /0.0 T0:25.4 /0.0 @:0 B@:0 P:47.9
2019-09-20 00:09:44,903 - Send: M105
2019-09-20 00:09:44,918 - Recv: ok T:25.5 /0.0 B:25.0 /0.0 T0:25.5 /0.0 @:0 B@:0 P:28.0
2019-09-20 00:09:47,166 - Recv: MMU => 'start'
2019-09-20 00:09:47,174 - Recv: MMU <= 'S1'
2019-09-20 00:09:49,908 - Send: M105
2019-09-20 00:09:49,925 - Recv: ok T:26.0 /0.0 B:25.0 /0.0 T0:26.0 /0.0 @:0 B@:0 P:25.5
2019-09-20 00:09:52,236 - Recv: MMU => '105ok'
2019-09-20 00:09:52,239 - Recv: MMU <= 'S2'
2019-09-20 00:09:52,254 - Recv: MMU => '297ok'
2019-09-20 00:09:52,258 - Recv: MMU version valid
2019-09-20 00:09:52,261 - Recv: MMU <= 'M1'
2019-09-20 00:09:52,264 - Recv: MMU - ENABLED
2019-09-20 00:09:54,911 - Send: M105
2019-09-20 00:09:54,927 - Recv: ok T:26.0 /0.0 B:25.0 /0.0 T0:26.0 /0.0 @:0 B@:0 P:25.5
2019-09-20 00:09:59,912 - Send: M105
2019-09-20 00:09:59,929 - Recv: ok T:26.0 /0.0 B:25.0 /0.0 T0:26.0 /0.0 @:0 B@:0 P:25.5
2019-09-20 00:10:04,914 - Send: M105
2019-09-20 00:10:04,930 - Recv: ok T:26.0 /0.0 B:25.0 /0.0 T0:26.0 /0.0 @:0 B@:0 P:25.5
2019-09-20 00:10:09,916 - Send: M105
2019-09-20 00:10:09,930 - Recv: ok T:26.0 /0.0 B:25.0 /0.0 T0:26.0 /0.0 @:0 B@:0 P:25.5
2019-09-20 00:10:14,919 - Send: M105
2019-09-20 00:10:14,936 - Recv: ok T:26.0 /0.0 B:25.0 /0.0 T0:26.0 /0.0 @:0 B@:0 P:25.5