2021-07-28 22:49:34,212 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2021-07-28 22:49:34,268 - octoprint.server - INFO - --- Log roll over detected --------------------------------------------------- 2021-07-28 22:49:34,270 - octoprint.server - INFO - OctoPrint 1.6.1 2021-07-28 22:49:34,276 - octoprint.plugin.core - INFO - 19 plugin(s) registered with the system: | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/appkeys | Arc-Welder (1.0.0+u.bb71e8f) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_arc_welder | Backup & Restore (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/backup | Core Wizard (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/corewizard | Discovery (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/discovery | Error Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/errortracking | File Check (2021.2.23) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_file_check | Firmware Check (2021.5.31) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_firmware_check | GCode Viewer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/gcodeviewer | Logging (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/logging | OctoPrint-BuildBee (2.2.4) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_buildbee | Pi Support Plugin (2021.3.26.post2) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/pluginmanager | Software Update (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/softwareupdate | Virtual Printer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2021-07-28 22:49:34,309 - octoprint.environment - INFO - Detected environment is Python 3.7.3 under Linux (linux). Details: | hardware: | cores: 4 | freq: 1200.0 | ram: 915722240 | os: | bits: 32 | id: linux | platform: linux | plugins: | pi_support: | model: Raspberry Pi 3 Model B Rev 1.2 | octopi_version: 0.18.0 | throttle_state: '0x0' | python: | pip: 20.3.3 | version: 3.7.3 | virtualenv: /home/pi/oprint 2021-07-28 22:49:34,310 - octoprint.server - INFO - ------------------------------------------------------------------------------ 2021-07-28 22:49:35,729 - octoprint.plugins.BuildBee - INFO - Reestablished connection to server 2021-07-28 22:49:35,733 - octoprint.plugins.BuildBee - INFO - DEVICE TYPE MODIFIED IN DATABASE: 2f2e3815-9b2d-4f79-9d98-9fe78e196281 2021-07-28 22:49:35,790 - octoprint.plugins.BuildBee - INFO - Updating registered printer profile 2021-07-28 22:49:37,020 - octoprint.plugins.BuildBee - INFO - Test connection successfully reached https://buildbee.com/proxy-test/payload.json 2021-07-28 22:49:38,209 - octoprint.plugins.BuildBee - INFO - Configuring as me3DMe2 2021-07-28 22:49:39,874 - octoprint.plugins.BuildBee - INFO - PROXY DICT: {} 2021-07-28 22:49:39,877 - octoprint.plugins.BuildBee - INFO - Searching for an interface to preferentially route requests proxy session traffic though... 2021-07-28 22:49:39,878 - octoprint.plugins.BuildBee - INFO - Candidate interfaces {'eth0': {'ipv4': ['192.168.1.226'], 'ipv6': ['fe80::1437:617c:787c:6328']}, 'lo': {'ipv4': ['127.0.0.1'], 'ipv6': ['::1']}, 'wlan0': {'ipv4': ['192.168.1.83'], 'ipv6': ['fe80::7a94:d1f4:8a2:192b']}} 2021-07-28 22:49:39,880 - octoprint.plugins.BuildBee - INFO - Candidate interface names dict_keys(['eth0', 'lo', 'wlan0']) 2021-07-28 22:49:39,881 - octoprint.plugins.BuildBee - INFO - Interfaces with IPs ['eth0', 'lo', 'wlan0'] 2021-07-28 22:49:39,882 - octoprint.plugins.BuildBee - INFO - Interfaces with valid names ['eth0', 'wlan0'] 2021-07-28 22:49:39,884 - octoprint.plugins.BuildBee - INFO - Interfaces with valid IPs ['eth0', 'wlan0'] 2021-07-28 22:49:39,885 - octoprint.plugins.BuildBee - INFO - Attempting to bind proxy session traffic to eth0 2021-07-28 22:49:47,794 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json 2021-07-28 22:49:48,929 - octoprint.server.util.flask - INFO - Passively logging in user Ender3pro from ::ffff:192.168.1.53 2021-07-28 22:49:48,931 - octoprint.access.users - INFO - Logged in user: Ender3pro 2021-07-28 22:49:49,645 - octoprint.plugins.BuildBee - INFO - Cleaning keys: ['lastConfigurationData'] 2021-07-28 22:50:41,413 - octoprint.server.util.flask - INFO - Passively logging in user Ender3pro from ::ffff:192.168.1.53 2021-07-28 22:50:41,416 - octoprint.access.users - INFO - Logged in user: Ender3pro 2021-07-28 22:50:41,619 - octoprint.plugins.BuildBee - INFO - Disabling BuildBee UI 2021-07-28 22:50:45,288 - octoprint.server.util.flask - INFO - Passively logging in user Ender3pro from ::ffff:192.168.1.53 2021-07-28 22:50:45,294 - octoprint.access.users - INFO - Logged in user: Ender3pro 2021-07-28 22:51:04,571 - octoprint.server.util.flask - INFO - Passively logging in user Ender3pro from ::ffff:192.168.1.53 2021-07-28 22:51:04,573 - octoprint.access.users - INFO - Logged in user: Ender3pro 2021-07-28 22:51:04,749 - octoprint.server.util.flask - INFO - Passively logging in user Ender3pro from ::ffff:192.168.1.53 2021-07-28 22:51:04,750 - octoprint.access.users - INFO - Logged in user: Ender3pro 2021-07-28 22:51:06,916 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.53 2021-07-28 22:51:06,989 - octoprint.server.util.flask - INFO - Passively logging in user Ender3pro from ::ffff:192.168.1.53 2021-07-28 22:51:06,990 - octoprint.access.users - INFO - Logged in user: Ender3pro 2021-07-28 22:51:09,603 - octoprint.plugins.announcements - INFO - Loaded channel _important from https://octoprint.org/feeds/important.xml in 0.58s 2021-07-28 22:51:10,346 - octoprint.plugins.announcements - INFO - Loaded channel _releases from https://octoprint.org/feeds/releases.xml in 0.62s 2021-07-28 22:51:11,036 - octoprint.plugins.announcements - INFO - Loaded channel _blog from https://octoprint.org/feeds/octoblog.xml in 0.53s 2021-07-28 22:51:11,695 - octoprint.plugins.announcements - INFO - Loaded channel _plugins from https://plugins.octoprint.org/feed.xml in 0.61s 2021-07-28 22:51:12,482 - octoprint.plugins.announcements - INFO - Loaded channel _octopi from https://octoprint.org/feeds/octopi.xml in 0.61s 2021-07-28 22:51:13,497 - octoprint.plugins.pluginmanager - INFO - Loaded plugin notices data from https://plugins.octoprint.org/notices.json 2021-07-28 22:51:14,991 - octoprint.startup - INFO - ****************************************************************************** 2021-07-28 22:51:14,993 - octoprint.startup - INFO - Starting OctoPrint 1.6.1 2021-07-28 22:51:14,994 - octoprint.startup - INFO - ****************************************************************************** 2021-07-28 22:51:15,653 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: online 2021-07-28 22:51:15,655 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 1.1.1.1:53 is working 2021-07-28 22:51:15,655 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is working 2021-07-28 22:51:15,833 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2021-07-28 22:51:19,475 - octoprint.plugin.core - INFO - Found 19 plugin(s) providing 19 mixin implementations, 38 hook handlers 2021-07-28 22:51:19,556 - octoprint.server.heartbeat - INFO - Starting server heartbeat, 900.0s interval 2021-07-28 22:51:19,591 - octoprint.server - INFO - Intermediary server started 2021-07-28 22:51:19,624 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/pi/.octoprint/uploads... 2021-07-28 22:51:19,628 - octoprint.filemanager.storage - INFO - ... file metadata for /home/pi/.octoprint/uploads initialized successfully. 2021-07-28 22:51:19,634 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_SHOW (needs: "Need(method='role', value='plugin_action_command_notification_show')") 2021-07-28 22:51:19,635 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_CLEAR (needs: "Need(method='role', value='plugin_action_command_notification_clear')") 2021-07-28 22:51:19,635 - octoprint.server - INFO - Added new permission from plugin action_command_prompt: PLUGIN_ACTION_COMMAND_PROMPT_INTERACT (needs: "Need(method='role', value='plugin_action_command_prompt_interact')") 2021-07-28 22:51:19,636 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_READ (needs: "Need(method='role', value='plugin_announcements_read')") 2021-07-28 22:51:19,636 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_MANAGE (needs: "Need(method='role', value='plugin_announcements_read'), Need(method='role', value='plugin_announcements_manage')") 2021-07-28 22:51:19,637 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_ADMIN (needs: "Need(method='role', value='plugin_appkeys_admin')") 2021-07-28 22:51:19,637 - octoprint.server - INFO - Added new permission from plugin backup: PLUGIN_BACKUP_ACCESS (needs: "Need(method='role', value='plugin_backup_access')") 2021-07-28 22:51:19,638 - octoprint.server - INFO - Added new permission from plugin firmware_check: PLUGIN_FIRMWARE_CHECK_DISPLAY (needs: "Need(method='role', value='plugin_firmware_check_display')") 2021-07-28 22:51:19,638 - octoprint.server - INFO - Added new permission from plugin logging: PLUGIN_LOGGING_MANAGE (needs: "Need(method='role', value='plugin_logging_manage')") 2021-07-28 22:51:19,639 - octoprint.server - INFO - Added new permission from plugin pi_support: PLUGIN_PI_SUPPORT_STATUS (needs: "Need(method='role', value='plugin_pi_support_check')") 2021-07-28 22:51:19,639 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_MANAGE (needs: "Need(method='role', value='plugin_pluginmanager_manage')") 2021-07-28 22:51:19,641 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_INSTALL (needs: "Need(method='role', value='plugin_pluginmanager_manage'), Need(method='role', value='plugin_pluginmanager_install')") 2021-07-28 22:51:19,642 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CHECK (needs: "Need(method='role', value='plugin_softwareupdate_check')") 2021-07-28 22:51:19,648 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_UPDATE (needs: "Need(method='role', value='plugin_softwareupdate_update')") 2021-07-28 22:51:19,649 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CONFIGURE (needs: "Need(method='role', value='plugin_softwareupdate_configure')") 2021-07-28 22:51:20,946 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip 2021-07-28 22:51:22,059 - octoprint.util.pip - INFO - Version of pip is 20.3.3 2021-07-28 22:51:22,061 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2021-07-28 22:51:22,062 - octoprint.util.pip - INFO - ==> pip ok -> yes 2021-07-28 22:51:22,167 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk 2021-07-28 22:51:22,211 - octoprint.plugin.core - INFO - Initialized 19 plugin implementation(s) 2021-07-28 22:51:22,323 - octoprint.plugin.core - INFO - 19 plugin(s) registered with the system: | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/appkeys | Arc-Welder (1.0.0+u.bb71e8f) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_arc_welder | Backup & Restore (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/backup | Core Wizard (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/corewizard | Discovery (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/discovery | Error Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/errortracking | File Check (2021.2.23) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_file_check | Firmware Check (2021.5.31) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_firmware_check | GCode Viewer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/gcodeviewer | Logging (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/logging | OctoPrint-BuildBee (2.2.4) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_buildbee | Pi Support Plugin (2021.3.26.post2) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/pluginmanager | Software Update (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/softwareupdate | Virtual Printer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2021-07-28 22:51:22,359 - octoprint.environment - INFO - Detected environment is Python 3.7.3 under Linux (linux). Details: | hardware: | cores: 4 | freq: 1200.0 | ram: 915722240 | os: | bits: 32 | id: linux | platform: linux | plugins: | pi_support: | model: Raspberry Pi 3 Model B Rev 1.2 | octopi_version: 0.18.0 | throttle_state: '0x0' | python: | pip: 20.3.3 | version: 3.7.3 | virtualenv: /home/pi/oprint 2021-07-28 22:51:22,372 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/webassets... 2021-07-28 22:51:22,388 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-cache... 2021-07-28 22:51:23,637 - octoprint.server - INFO - Shutting down intermediary server... 2021-07-28 22:51:24,114 - octoprint.server - INFO - Intermediary server shut down 2021-07-28 22:51:24,117 - octoprint.events - INFO - Processing startup event, this is our first event 2021-07-28 22:51:24,118 - octoprint.events - INFO - Adding 1 events to queue that were held back before startup event 2021-07-28 22:51:24,120 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue... 2021-07-28 22:51:24,125 - octoprint.server - INFO - Autoconnect on startup is configured, trying to connect to the printer... 2021-07-28 22:51:24,178 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue 2021-07-28 22:51:24,203 - octoprint.server - INFO - Trying to connect to configured serial port /dev/ttyACM0 2021-07-28 22:51:24,261 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Opening serial connection" 2021-07-28 22:51:24,263 - octoprint.util.comm - INFO - Connecting to port /dev/ttyACM0, baudrate 230400 2021-07-28 22:51:24,272 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder... 2021-07-28 22:51:24,272 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial connection" to "Connecting" 2021-07-28 22:51:24,280 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2021-07-28 22:51:24,281 - octoprint.server.util.watchdog - INFO - ... initial scan done. 2021-07-28 22:51:25,093 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on octopi._http._tcp.local.' for _http._tcp.local. 2021-07-28 22:51:25,916 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on octopi._octoprint._tcp.local.' for _octoprint._tcp.local. 2021-07-28 22:51:25,934 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance on octopi for SSDP 2021-07-28 22:51:26,099 - octoprint.plugins.BuildBee - INFO - Current user is pi 2021-07-28 22:51:26,100 - octoprint.plugins.BuildBee - WARNING - Cannot configure networks without passwordless sudo 2021-07-28 22:51:26,102 - octoprint.plugins.BuildBee - INFO - No owner syncing required 2021-07-28 22:51:26,104 - octoprint.plugins.BuildBee - INFO - My serial: 9243aa1b-6cc0-4ec5-9454-960b28edb66a 2021-07-28 22:51:27,884 - octoprint.plugins.BuildBee - ERROR - Couldn't install GPX plugin 2021-07-28 22:51:27,887 - octoprint.plugins.BuildBee - INFO - Base folder is /home/pi/oprint/lib/python3.7/site-packages/octoprint_buildbee 2021-07-28 22:51:27,894 - octoprint.plugins.BuildBee - INFO - Setting up static templates 2021-07-28 22:51:28,062 - octoprint.plugins.BuildBee - INFO - Injecting /home/pi/oprint/lib/python3.7/site-packages/octoprint_buildbee/templates/BuildBee_navbar.jinja2 templates 2021-07-28 22:51:28,102 - octoprint.server - INFO - Listening on http://127.0.0.1:5000 2021-07-28 22:51:29,263 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip 2021-07-28 22:51:29,265 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2021-07-28 22:51:29,265 - octoprint.util.pip - INFO - ==> pip ok -> yes 2021-07-28 22:51:29,272 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 4.4GB. That is considered sufficient for updating. 2021-07-28 22:51:29,274 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json 2021-07-28 22:51:29,326 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from https://plugins.octoprint.org/plugins.json 2021-07-28 22:51:30,041 - octoprint.plugins.BuildBee - INFO - Checking for rollback 2021-07-28 22:51:31,163 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2021-07-28 22:51:32,686 - octoprint.plugins.BuildBee - INFO - No rollback directive found 2021-07-28 22:51:32,876 - octoprint.plugins.BuildBee - INFO - Successfully found WiFi network. Given address: ['192.168.1.83'] 2021-07-28 22:51:32,878 - octoprint.plugins.BuildBee - INFO - PROXY DICT: {} 2021-07-28 22:51:32,880 - octoprint.plugins.BuildBee - INFO - Searching for an interface to preferentially route requests proxy session traffic though... 2021-07-28 22:51:32,883 - octoprint.plugins.BuildBee - INFO - Candidate interfaces {'eth0': {'ipv4': [], 'ipv6': []}, 'lo': {'ipv4': ['127.0.0.1'], 'ipv6': ['::1']}, 'wlan0': {'ipv4': ['192.168.1.83'], 'ipv6': ['fe80::7a94:d1f4:8a2:192b']}} 2021-07-28 22:51:32,884 - octoprint.plugins.BuildBee - INFO - Candidate interface names dict_keys(['eth0', 'lo', 'wlan0']) 2021-07-28 22:51:32,888 - octoprint.plugins.BuildBee - INFO - Interfaces with IPs ['lo', 'wlan0'] 2021-07-28 22:51:32,890 - octoprint.plugins.BuildBee - INFO - Interfaces with valid names ['wlan0'] 2021-07-28 22:51:32,894 - octoprint.plugins.BuildBee - INFO - Interfaces with valid IPs ['wlan0'] 2021-07-28 22:51:32,896 - octoprint.plugins.BuildBee - INFO - Attempting to bind proxy session traffic to wlan0 2021-07-28 22:51:33,879 - octoprint.plugins.BuildBee - INFO - Reestablished connection to server 2021-07-28 22:51:33,883 - octoprint.plugins.BuildBee - INFO - DEVICE TYPE MODIFIED IN DATABASE: 2f2e3815-9b2d-4f79-9d98-9fe78e196281 2021-07-28 22:51:34,018 - octoprint.plugins.BuildBee - INFO - Updating registered printer profile 2021-07-28 22:51:36,385 - octoprint.plugins.BuildBee - INFO - Configuring as me3DMe2 2021-07-28 22:51:37,389 - octoprint.plugins.BuildBee - INFO - PROXY DICT: {} 2021-07-28 22:51:37,391 - octoprint.plugins.BuildBee - INFO - Searching for an interface to preferentially route requests proxy session traffic though... 2021-07-28 22:51:37,393 - octoprint.plugins.BuildBee - INFO - Candidate interfaces {'eth0': {'ipv4': [], 'ipv6': []}, 'lo': {'ipv4': ['127.0.0.1'], 'ipv6': ['::1']}, 'wlan0': {'ipv4': ['192.168.1.83'], 'ipv6': ['fe80::7a94:d1f4:8a2:192b']}} 2021-07-28 22:51:37,394 - octoprint.plugins.BuildBee - INFO - Candidate interface names dict_keys(['eth0', 'lo', 'wlan0']) 2021-07-28 22:51:37,396 - octoprint.plugins.BuildBee - INFO - Interfaces with IPs ['lo', 'wlan0'] 2021-07-28 22:51:37,397 - octoprint.plugins.BuildBee - INFO - Interfaces with valid names ['wlan0'] 2021-07-28 22:51:37,399 - octoprint.plugins.BuildBee - INFO - Interfaces with valid IPs ['wlan0'] 2021-07-28 22:51:37,400 - octoprint.plugins.BuildBee - INFO - Attempting to bind proxy session traffic to wlan0 2021-07-28 23:14:24,303 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2021-07-28 23:14:25,319 - octoprint.plugins.BuildBee - INFO - Cleaning keys: ['lastConfigurationData'] 2021-07-28 23:14:27,338 - octoprint.plugins.BuildBee - INFO - Test connection successfully reached https://buildbee.com/proxy-test/payload.json 2021-07-28 23:14:38,941 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2021-07-28 23:14:49,072 - octoprint_firmware_check.checks - INFO - Deactivated octoprint_firmware_check.checks due to timeout after 30.0s 2021-07-28 23:14:49,073 - octoprint_firmware_check.checks - INFO - Deactivated octoprint_firmware_check.checks due to timeout after 30.0s 2021-07-28 23:14:49,075 - octoprint_firmware_check.checks - INFO - Deactivated octoprint_firmware_check.checks due to timeout after 30.0s 2021-07-28 23:14:49,076 - octoprint_firmware_check.checks - INFO - Deactivated octoprint_firmware_check.checks due to timeout after 30.0s 2021-07-28 23:14:49,077 - octoprint_firmware_check.checks - INFO - Deactivated octoprint_firmware_check.checks due to timeout after 30.0s 2021-07-28 23:14:49,078 - octoprint_firmware_check.checks - INFO - Deactivated octoprint_firmware_check.checks due to timeout after 30.0s 2021-07-28 23:14:49,079 - octoprint_firmware_check.checks - INFO - Deactivated octoprint_firmware_check.checks due to timeout after 30.0s 2021-07-28 23:14:49,080 - octoprint_firmware_check.checks - INFO - Deactivated octoprint_firmware_check.checks due to timeout after 30.0s 2021-07-28 23:14:49,081 - octoprint_firmware_check.checks - INFO - Deactivated octoprint_firmware_check.checks due to timeout after 30.0s 2021-07-28 23:14:49,083 - octoprint_firmware_check.checks - INFO - Deactivated octoprint_firmware_check.checks due to timeout after 30.0s 2021-07-28 23:14:49,084 - octoprint_firmware_check.checks - INFO - Deactivated octoprint_firmware_check.checks due to timeout after 30.0s 2021-07-28 23:14:49,085 - octoprint_firmware_check.checks - INFO - Deactivated octoprint_firmware_check.checks due to timeout after 30.0s 2021-07-28 23:14:49,086 - octoprint_firmware_check.checks - INFO - Deactivated octoprint_firmware_check.checks due to timeout after 30.0s 2021-07-28 23:14:49,087 - octoprint_firmware_check.checks - INFO - Deactivated octoprint_firmware_check.checks due to timeout after 30.0s 2021-07-28 23:14:49,090 - octoprint.util.comm - INFO - Changing monitoring state from "Connecting" to "Offline" 2021-07-28 23:14:49,095 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2021-07-28 23:14:49,272 - octoprint.plugins.BuildBee - INFO - Connecting to printer on device /dev/ttyACM0 2021-07-28 23:14:49,324 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Opening serial connection" 2021-07-28 23:14:49,327 - octoprint.util.comm - INFO - Connecting to port /dev/ttyACM0, baudrate 250000 2021-07-28 23:14:49,334 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial connection" to "Connecting" 2021-07-28 23:14:49,338 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2021-07-28 23:14:59,707 - octoprint.plugins.BuildBee - WARNING - Adding /dev/ttyACM0 to serial ignore due to timeout 2021-07-28 23:14:59,713 - octoprint.util.comm - INFO - Changing monitoring state from "Connecting" to "Offline" 2021-07-28 23:14:59,717 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2021-07-28 23:15:01,257 - octoprint.plugins.BuildBee - WARNING - Alt baud enabled 2021-07-28 23:15:01,259 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-28 23:15:02,966 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-28 23:15:02,968 - octoprint.plugins.BuildBee - INFO - Connecting to printer on device /dev/ttyACM0 2021-07-28 23:15:03,020 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Opening serial connection" 2021-07-28 23:15:03,023 - octoprint.util.comm - INFO - Connecting to port /dev/ttyACM0, baudrate 115200 2021-07-28 23:15:03,030 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial connection" to "Connecting" 2021-07-28 23:15:03,035 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2021-07-28 23:15:03,947 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2021-07-28 23:15:04,461 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2021-07-28 23:15:04,484 - octoprint.util.comm - INFO - Changing monitoring state from "Connecting" to "Operational" 2021-07-28 23:15:04,535 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2021-07-28 23:15:04,588 - octoprint.util.comm - INFO - Printer reports firmware name "INTAMSYS HT1.5_200905_C" 2021-07-28 23:15:06,819 - octoprint.server.util.flask - INFO - Passively logging in user Ender3pro from ::ffff:192.168.1.53 2021-07-28 23:15:06,820 - octoprint.access.users - INFO - Logged in user: Ender3pro 2021-07-28 23:15:27,232 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.53 2021-07-28 23:15:27,360 - octoprint.server.util.flask - INFO - Passively logging in user Ender3pro from ::ffff:192.168.1.53 2021-07-28 23:15:27,361 - octoprint.access.users - INFO - Logged in user: Ender3pro 2021-07-28 23:15:30,424 - octoprint.server.util.sockjs - INFO - User Ender3pro logged in on the socket from client ::ffff:192.168.1.53 2021-07-28 23:15:34,518 - octoprint_firmware_check.checks - INFO - Deactivated octoprint_firmware_check.checks due to timeout after 30.0s 2021-07-28 23:15:34,524 - octoprint_firmware_check.checks - INFO - Deactivated octoprint_firmware_check.checks due to timeout after 30.0s 2021-07-28 23:15:37,884 - octoprint.plugins.BuildBee - INFO - PROXY DICT: {} 2021-07-28 23:15:37,886 - octoprint.plugins.BuildBee - INFO - Searching for an interface to preferentially route requests proxy session traffic though... 2021-07-28 23:15:37,887 - octoprint.plugins.BuildBee - INFO - Candidate interfaces {'eth0': {'ipv4': [], 'ipv6': ['fe80::1437:617c:787c:6328']}, 'lo': {'ipv4': ['127.0.0.1'], 'ipv6': ['::1']}, 'wlan0': {'ipv4': ['192.168.1.83'], 'ipv6': ['fe80::7a94:d1f4:8a2:192b']}} 2021-07-28 23:15:37,888 - octoprint.plugins.BuildBee - INFO - Candidate interface names dict_keys(['eth0', 'lo', 'wlan0']) 2021-07-28 23:15:37,889 - octoprint.plugins.BuildBee - INFO - Interfaces with IPs ['lo', 'wlan0'] 2021-07-28 23:15:37,890 - octoprint.plugins.BuildBee - INFO - Interfaces with valid names ['wlan0'] 2021-07-28 23:15:37,891 - octoprint.plugins.BuildBee - INFO - Interfaces with valid IPs ['wlan0'] 2021-07-28 23:15:37,893 - octoprint.plugins.BuildBee - INFO - Attempting to bind proxy session traffic to wlan0 2021-07-28 23:15:47,283 - octoprint.plugins.BuildBee - INFO - PROXY DICT: {} 2021-07-28 23:15:47,287 - octoprint.plugins.BuildBee - INFO - Searching for an interface to preferentially route requests proxy session traffic though... 2021-07-28 23:15:47,289 - octoprint.plugins.BuildBee - INFO - Candidate interfaces {'eth0': {'ipv4': ['192.168.1.226'], 'ipv6': ['fe80::1437:617c:787c:6328']}, 'lo': {'ipv4': ['127.0.0.1'], 'ipv6': ['::1']}, 'wlan0': {'ipv4': ['192.168.1.83'], 'ipv6': ['fe80::7a94:d1f4:8a2:192b']}} 2021-07-28 23:15:47,291 - octoprint.plugins.BuildBee - INFO - Candidate interface names dict_keys(['eth0', 'lo', 'wlan0']) 2021-07-28 23:15:47,292 - octoprint.plugins.BuildBee - INFO - Interfaces with IPs ['eth0', 'lo', 'wlan0'] 2021-07-28 23:15:47,294 - octoprint.plugins.BuildBee - INFO - Interfaces with valid names ['eth0', 'wlan0'] 2021-07-28 23:15:47,295 - octoprint.plugins.BuildBee - INFO - Interfaces with valid IPs ['eth0', 'wlan0'] 2021-07-28 23:15:47,296 - octoprint.plugins.BuildBee - INFO - Attempting to bind proxy session traffic to eth0 2021-07-28 23:20:02,279 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.198 2021-07-28 23:21:09,815 - tornado.access - WARNING - 403 POST /api/login (::ffff:192.168.1.198) 141.21ms 2021-07-28 23:21:43,907 - tornado.access - WARNING - 403 POST /api/login (::ffff:192.168.1.198) 17.81ms 2021-07-28 23:21:53,911 - tornado.access - WARNING - 403 POST /api/login (::ffff:192.168.1.198) 25.10ms 2021-07-28 23:22:21,808 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.198 2021-07-28 23:23:01,993 - octoprint.startup - INFO - ****************************************************************************** 2021-07-28 23:23:01,996 - octoprint.startup - INFO - Starting OctoPrint 1.6.1 2021-07-28 23:23:01,998 - octoprint.startup - INFO - ****************************************************************************** 2021-07-28 23:23:02,801 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: online 2021-07-28 23:23:02,802 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 1.1.1.1:53 is working 2021-07-28 23:23:02,802 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is working 2021-07-28 23:23:02,959 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2021-07-28 23:23:06,617 - octoprint.plugin.core - INFO - Found 19 plugin(s) providing 19 mixin implementations, 38 hook handlers 2021-07-28 23:23:06,719 - octoprint.server.heartbeat - INFO - Starting server heartbeat, 900.0s interval 2021-07-28 23:23:06,767 - octoprint.server - INFO - Intermediary server started 2021-07-28 23:23:06,812 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/pi/.octoprint/uploads... 2021-07-28 23:23:06,829 - octoprint.filemanager.storage - INFO - ... file metadata for /home/pi/.octoprint/uploads initialized successfully. 2021-07-28 23:23:06,835 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_SHOW (needs: "Need(method='role', value='plugin_action_command_notification_show')") 2021-07-28 23:23:06,837 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_CLEAR (needs: "Need(method='role', value='plugin_action_command_notification_clear')") 2021-07-28 23:23:06,837 - octoprint.server - INFO - Added new permission from plugin action_command_prompt: PLUGIN_ACTION_COMMAND_PROMPT_INTERACT (needs: "Need(method='role', value='plugin_action_command_prompt_interact')") 2021-07-28 23:23:06,838 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_READ (needs: "Need(method='role', value='plugin_announcements_read')") 2021-07-28 23:23:06,839 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_MANAGE (needs: "Need(method='role', value='plugin_announcements_manage'), Need(method='role', value='plugin_announcements_read')") 2021-07-28 23:23:06,839 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_ADMIN (needs: "Need(method='role', value='plugin_appkeys_admin')") 2021-07-28 23:23:06,840 - octoprint.server - INFO - Added new permission from plugin backup: PLUGIN_BACKUP_ACCESS (needs: "Need(method='role', value='plugin_backup_access')") 2021-07-28 23:23:06,840 - octoprint.server - INFO - Added new permission from plugin firmware_check: PLUGIN_FIRMWARE_CHECK_DISPLAY (needs: "Need(method='role', value='plugin_firmware_check_display')") 2021-07-28 23:23:06,846 - octoprint.server - INFO - Added new permission from plugin logging: PLUGIN_LOGGING_MANAGE (needs: "Need(method='role', value='plugin_logging_manage')") 2021-07-28 23:23:06,847 - octoprint.server - INFO - Added new permission from plugin pi_support: PLUGIN_PI_SUPPORT_STATUS (needs: "Need(method='role', value='plugin_pi_support_check')") 2021-07-28 23:23:06,849 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_MANAGE (needs: "Need(method='role', value='plugin_pluginmanager_manage')") 2021-07-28 23:23:06,851 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_INSTALL (needs: "Need(method='role', value='plugin_pluginmanager_manage'), Need(method='role', value='plugin_pluginmanager_install')") 2021-07-28 23:23:06,852 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CHECK (needs: "Need(method='role', value='plugin_softwareupdate_check')") 2021-07-28 23:23:06,854 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_UPDATE (needs: "Need(method='role', value='plugin_softwareupdate_update')") 2021-07-28 23:23:06,856 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CONFIGURE (needs: "Need(method='role', value='plugin_softwareupdate_configure')") 2021-07-28 23:23:08,260 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip 2021-07-28 23:23:09,249 - octoprint.util.pip - INFO - Version of pip is 20.3.3 2021-07-28 23:23:09,251 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2021-07-28 23:23:09,252 - octoprint.util.pip - INFO - ==> pip ok -> yes 2021-07-28 23:23:09,360 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk 2021-07-28 23:23:09,412 - octoprint.plugin.core - INFO - Initialized 19 plugin implementation(s) 2021-07-28 23:23:09,523 - octoprint.plugin.core - INFO - 19 plugin(s) registered with the system: | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/appkeys | Arc-Welder (1.0.0+u.bb71e8f) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_arc_welder | Backup & Restore (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/backup | Core Wizard (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/corewizard | Discovery (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/discovery | Error Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/errortracking | File Check (2021.2.23) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_file_check | Firmware Check (2021.5.31) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_firmware_check | GCode Viewer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/gcodeviewer | Logging (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/logging | OctoPrint-BuildBee (2.2.4) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_buildbee | Pi Support Plugin (2021.3.26.post2) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/pluginmanager | Software Update (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/softwareupdate | Virtual Printer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2021-07-28 23:23:09,560 - octoprint.environment - INFO - Detected environment is Python 3.7.3 under Linux (linux). Details: | hardware: | cores: 4 | freq: 1200.0 | ram: 915722240 | os: | bits: 32 | id: linux | platform: linux | plugins: | pi_support: | model: Raspberry Pi 3 Model B Rev 1.2 | octopi_version: 0.18.0 | throttle_state: '0x0' | python: | pip: 20.3.3 | version: 3.7.3 | virtualenv: /home/pi/oprint 2021-07-28 23:23:09,574 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/webassets... 2021-07-28 23:23:09,594 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-cache... 2021-07-28 23:23:10,892 - octoprint.server - INFO - Shutting down intermediary server... 2021-07-28 23:23:10,952 - octoprint.server - INFO - Intermediary server shut down 2021-07-28 23:23:10,956 - octoprint.events - INFO - Processing startup event, this is our first event 2021-07-28 23:23:10,956 - octoprint.events - INFO - Adding 1 events to queue that were held back before startup event 2021-07-28 23:23:10,961 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue... 2021-07-28 23:23:10,964 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue 2021-07-28 23:23:10,965 - octoprint.server - INFO - Autoconnect on startup is configured, trying to connect to the printer... 2021-07-28 23:23:11,020 - octoprint.server - INFO - Could not find configured serial port {} in the system, cannot automatically connect to a non existing printer. Is it plugged in and booted up yet? 2021-07-28 23:23:11,023 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder... 2021-07-28 23:23:11,025 - octoprint.server.util.watchdog - INFO - ... initial scan done. 2021-07-28 23:23:11,841 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on octopi._http._tcp.local.' for _http._tcp.local. 2021-07-28 23:23:12,658 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on octopi._octoprint._tcp.local.' for _octoprint._tcp.local. 2021-07-28 23:23:12,678 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance on octopi for SSDP 2021-07-28 23:23:12,828 - octoprint.plugins.BuildBee - INFO - Current user is pi 2021-07-28 23:23:12,830 - octoprint.plugins.BuildBee - WARNING - Cannot configure networks without passwordless sudo 2021-07-28 23:23:12,831 - octoprint.plugins.BuildBee - INFO - No owner syncing required 2021-07-28 23:23:12,833 - octoprint.plugins.BuildBee - INFO - My serial: 9243aa1b-6cc0-4ec5-9454-960b28edb66a 2021-07-28 23:23:13,274 - octoprint.plugins.BuildBee - ERROR - Couldn't install GPX plugin 2021-07-28 23:23:13,277 - octoprint.plugins.BuildBee - INFO - Base folder is /home/pi/oprint/lib/python3.7/site-packages/octoprint_buildbee 2021-07-28 23:23:13,278 - octoprint.plugins.BuildBee - INFO - Setting up static templates 2021-07-28 23:23:13,444 - octoprint.plugins.BuildBee - INFO - Injecting /home/pi/oprint/lib/python3.7/site-packages/octoprint_buildbee/templates/BuildBee_navbar.jinja2 templates 2021-07-28 23:23:13,508 - octoprint.server - INFO - Listening on http://127.0.0.1:5000 2021-07-28 23:23:13,643 - tornado.access - WARNING - 404 GET /intermediary.gif?_=1627574971226 (::ffff:192.168.1.53) 94.20ms 2021-07-28 23:23:13,763 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2021-07-28 23:23:14,161 - octoprint.server.views - INFO - Preemptive cache not active for path /, ui _default and data {'path': '/', 'base_url': 'http://192.168.1.83/', 'query_string': 'l10n=en'}, signaling as cached 2021-07-28 23:23:14,835 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip 2021-07-28 23:23:14,854 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2021-07-28 23:23:14,855 - octoprint.util.pip - INFO - ==> pip ok -> yes 2021-07-28 23:23:14,926 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 4.4GB. That is considered sufficient for updating. 2021-07-28 23:23:14,934 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json 2021-07-28 23:23:16,360 - octoprint.plugins.BuildBee - INFO - Checking for rollback 2021-07-28 23:23:16,575 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2021-07-28 23:23:17,111 - octoprint.server.util.flask - INFO - Passively logging in user Ender3pro from ::ffff:192.168.1.53 2021-07-28 23:23:17,113 - octoprint.access.users - INFO - Logged in user: Ender3pro 2021-07-28 23:23:19,522 - octoprint.plugins.BuildBee - INFO - No rollback directive found 2021-07-28 23:23:19,836 - octoprint.plugins.BuildBee - INFO - Reestablished connection to server 2021-07-28 23:23:19,842 - octoprint.plugins.BuildBee - INFO - DEVICE TYPE MODIFIED IN DATABASE: 2f2e3815-9b2d-4f79-9d98-9fe78e196281 2021-07-28 23:23:19,955 - octoprint.plugins.BuildBee - INFO - Updating registered printer profile 2021-07-28 23:23:22,441 - octoprint.plugins.BuildBee - INFO - Configuring as me3DMe2 2021-07-29 17:09:48,858 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2021-07-29 17:09:50,641 - octoprint.plugins.BuildBee - INFO - Cleaning keys: ['lastConfigurationData'] 2021-07-29 17:09:51,498 - tornado.access - WARNING - 404 GET /intermediary.gif?_=1627574974234 (::ffff:192.168.1.53) 16.41ms 2021-07-29 17:09:51,576 - octoprint.plugins.BuildBee - INFO - Successfully found WiFi network. Given address: ['192.168.1.83'] 2021-07-29 17:09:51,790 - octoprint.plugins.BuildBee - INFO - PROXY DICT: {} 2021-07-29 17:09:51,793 - octoprint.plugins.BuildBee - INFO - Searching for an interface to preferentially route requests proxy session traffic though... 2021-07-29 17:09:51,797 - octoprint.plugins.BuildBee - INFO - Candidate interfaces {'eth0': {'ipv4': ['192.168.1.226'], 'ipv6': ['fe80::1437:617c:787c:6328']}, 'lo': {'ipv4': ['127.0.0.1'], 'ipv6': ['::1']}, 'wlan0': {'ipv4': ['192.168.1.83'], 'ipv6': ['fe80::7a94:d1f4:8a2:192b']}} 2021-07-29 17:09:51,798 - octoprint.plugins.BuildBee - INFO - Candidate interface names dict_keys(['eth0', 'lo', 'wlan0']) 2021-07-29 17:09:51,800 - octoprint.plugins.BuildBee - INFO - Interfaces with IPs ['eth0', 'lo', 'wlan0'] 2021-07-29 17:09:51,806 - octoprint.plugins.BuildBee - INFO - Interfaces with valid names ['eth0', 'wlan0'] 2021-07-29 17:09:51,810 - octoprint.plugins.BuildBee - INFO - Interfaces with valid IPs ['eth0', 'wlan0'] 2021-07-29 17:09:51,811 - octoprint.plugins.BuildBee - INFO - Attempting to bind proxy session traffic to eth0 2021-07-29 17:09:53,007 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.53 2021-07-29 17:09:53,099 - octoprint.server.util.flask - INFO - Passively logging in user Ender3pro from ::ffff:192.168.1.53 2021-07-29 17:09:53,101 - octoprint.access.users - INFO - Logged in user: Ender3pro 2021-07-29 17:09:53,313 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json 2021-07-29 17:09:55,937 - octoprint.plugins.announcements - INFO - Loaded channel _important from https://octoprint.org/feeds/important.xml in 0.63s 2021-07-29 17:09:56,743 - octoprint.plugins.announcements - INFO - Loaded channel _releases from https://octoprint.org/feeds/releases.xml in 0.58s 2021-07-29 17:09:57,331 - octoprint.plugins.announcements - INFO - Loaded channel _blog from https://octoprint.org/feeds/octoblog.xml in 0.54s 2021-07-29 17:09:58,109 - octoprint.plugins.announcements - INFO - Loaded channel _plugins from https://plugins.octoprint.org/feed.xml in 0.6s 2021-07-29 17:09:58,787 - octoprint.plugins.announcements - INFO - Loaded channel _octopi from https://octoprint.org/feeds/octopi.xml in 0.57s 2021-07-29 17:09:59,808 - octoprint.plugins.pluginmanager - INFO - Loaded plugin notices data from https://plugins.octoprint.org/notices.json 2021-07-29 17:10:00,315 - octoprint.server.util.sockjs - INFO - User Ender3pro logged in on the socket from client ::ffff:192.168.1.53 2021-07-29 17:10:02,780 - octoprint.plugins.BuildBee - INFO - Test connection successfully reached https://buildbee.com/proxy-test/payload.json 2021-07-29 17:13:17,693 - octoprint.plugins.BuildBee - INFO - Connecting to printer on device /dev/ttyUSB0 2021-07-29 17:13:17,750 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Opening serial connection" 2021-07-29 17:13:17,757 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 250000 2021-07-29 17:13:17,771 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial connection" to "Connecting" 2021-07-29 17:13:17,780 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2021-07-29 17:13:18,704 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2021-07-29 17:13:22,173 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2021-07-29 17:13:22,177 - octoprint.util.comm - INFO - Changing monitoring state from "Connecting" to "Operational" 2021-07-29 17:13:22,213 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2021-07-29 17:13:22,245 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin V1.0.2; Sprinter/grbl mashup for gen6" 2021-07-29 17:13:44,296 - octoprint.server.util.sockjs - INFO - User Ender3pro logged out, logging out on socket 2021-07-29 17:13:44,300 - octoprint.access.users - INFO - Logged out user: Ender3pro 2021-07-29 17:13:44,678 - tornado.access - WARNING - 403 GET /api/settings (::ffff:192.168.1.53) 325.58ms 2021-07-29 17:13:45,129 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.53 2021-07-29 17:13:45,376 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.53 2021-07-29 17:13:50,582 - octoprint.access.users - INFO - Logged in user: Ender3pro 2021-07-29 17:13:50,585 - octoprint.server.api - INFO - Actively logging in user Ender3pro from ::ffff:192.168.1.53 2021-07-29 17:13:50,702 - octoprint.server.util.flask - INFO - Passively logging in user Ender3pro from ::ffff:192.168.1.53 2021-07-29 17:13:50,703 - octoprint.access.users - INFO - Logged in user: Ender3pro 2021-07-29 17:13:50,784 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.53 2021-07-29 17:13:51,253 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.53 2021-07-29 17:13:51,335 - octoprint.server.util.flask - INFO - Passively logging in user Ender3pro from ::ffff:192.168.1.53 2021-07-29 17:13:51,341 - octoprint.access.users - INFO - Logged in user: Ender3pro 2021-07-29 17:13:52,253 - octoprint_firmware_check.checks - INFO - Deactivated octoprint_firmware_check.checks due to timeout after 30.0s 2021-07-29 17:13:52,259 - octoprint_firmware_check.checks - INFO - Deactivated octoprint_firmware_check.checks due to timeout after 30.0s 2021-07-29 17:13:54,667 - octoprint.server.util.sockjs - INFO - User Ender3pro logged in on the socket from client ::ffff:192.168.1.53 2021-07-29 17:14:55,224 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.53 2021-07-29 17:15:08,672 - octoprint.plugins.BuildBee - INFO - PROXY DICT: {} 2021-07-29 17:15:08,674 - octoprint.plugins.BuildBee - INFO - Searching for an interface to preferentially route requests proxy session traffic though... 2021-07-29 17:15:08,676 - octoprint.plugins.BuildBee - INFO - Candidate interfaces {'eth0': {'ipv4': [], 'ipv6': []}, 'lo': {'ipv4': ['127.0.0.1'], 'ipv6': ['::1']}, 'wlan0': {'ipv4': ['192.168.1.83'], 'ipv6': ['fe80::7a94:d1f4:8a2:192b']}} 2021-07-29 17:15:08,677 - octoprint.plugins.BuildBee - INFO - Candidate interface names dict_keys(['eth0', 'lo', 'wlan0']) 2021-07-29 17:15:08,678 - octoprint.plugins.BuildBee - INFO - Interfaces with IPs ['lo', 'wlan0'] 2021-07-29 17:15:08,679 - octoprint.plugins.BuildBee - INFO - Interfaces with valid names ['wlan0'] 2021-07-29 17:15:08,681 - octoprint.plugins.BuildBee - INFO - Interfaces with valid IPs ['wlan0'] 2021-07-29 17:15:08,682 - octoprint.plugins.BuildBee - INFO - Attempting to bind proxy session traffic to wlan0 2021-07-29 17:15:12,158 - octoprint.util.comm - ERROR - Unexpected error while reading from serial port Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3860, in _readline ret = self._serial.readline() File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 6488, in readline c = self.read(1) File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 596, in read 'device reports readiness to read but returned no data ' serial.serialutil.SerialException: device reports readiness to read but returned no data (device disconnected or multiple access on port?) 2021-07-29 17:15:12,200 - octoprint.util.comm - ERROR - Please see https://faq.octoprint.org/serialerror for possible reasons of this. 2021-07-29 17:15:12,206 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Offline after error" 2021-07-29 17:15:12,215 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2021-07-29 17:13:37,908 - octoprint.startup - INFO - ****************************************************************************** 2021-07-29 17:13:37,912 - octoprint.startup - INFO - Starting OctoPrint 1.6.1 2021-07-29 17:13:37,914 - octoprint.startup - INFO - ****************************************************************************** 2021-07-29 17:13:38,566 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: online 2021-07-29 17:13:38,567 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 1.1.1.1:53 is working 2021-07-29 17:13:38,567 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is working 2021-07-29 17:13:38,762 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2021-07-29 17:13:42,433 - octoprint.plugin.core - INFO - Found 19 plugin(s) providing 19 mixin implementations, 38 hook handlers 2021-07-29 17:13:42,536 - octoprint.server.heartbeat - INFO - Starting server heartbeat, 900.0s interval 2021-07-29 17:13:42,693 - octoprint.server - INFO - Intermediary server started 2021-07-29 17:13:42,731 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/pi/.octoprint/uploads... 2021-07-29 17:13:42,743 - octoprint.filemanager.storage - INFO - ... file metadata for /home/pi/.octoprint/uploads initialized successfully. 2021-07-29 17:13:42,749 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_SHOW (needs: "Need(method='role', value='plugin_action_command_notification_show')") 2021-07-29 17:13:42,750 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_CLEAR (needs: "Need(method='role', value='plugin_action_command_notification_clear')") 2021-07-29 17:13:42,750 - octoprint.server - INFO - Added new permission from plugin action_command_prompt: PLUGIN_ACTION_COMMAND_PROMPT_INTERACT (needs: "Need(method='role', value='plugin_action_command_prompt_interact')") 2021-07-29 17:13:42,751 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_READ (needs: "Need(method='role', value='plugin_announcements_read')") 2021-07-29 17:13:42,752 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_MANAGE (needs: "Need(method='role', value='plugin_announcements_manage'), Need(method='role', value='plugin_announcements_read')") 2021-07-29 17:13:42,752 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_ADMIN (needs: "Need(method='role', value='plugin_appkeys_admin')") 2021-07-29 17:13:42,753 - octoprint.server - INFO - Added new permission from plugin backup: PLUGIN_BACKUP_ACCESS (needs: "Need(method='role', value='plugin_backup_access')") 2021-07-29 17:13:42,753 - octoprint.server - INFO - Added new permission from plugin firmware_check: PLUGIN_FIRMWARE_CHECK_DISPLAY (needs: "Need(method='role', value='plugin_firmware_check_display')") 2021-07-29 17:13:42,754 - octoprint.server - INFO - Added new permission from plugin logging: PLUGIN_LOGGING_MANAGE (needs: "Need(method='role', value='plugin_logging_manage')") 2021-07-29 17:13:42,754 - octoprint.server - INFO - Added new permission from plugin pi_support: PLUGIN_PI_SUPPORT_STATUS (needs: "Need(method='role', value='plugin_pi_support_check')") 2021-07-29 17:13:42,759 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_MANAGE (needs: "Need(method='role', value='plugin_pluginmanager_manage')") 2021-07-29 17:13:42,764 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_INSTALL (needs: "Need(method='role', value='plugin_pluginmanager_manage'), Need(method='role', value='plugin_pluginmanager_install')") 2021-07-29 17:13:42,767 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CHECK (needs: "Need(method='role', value='plugin_softwareupdate_check')") 2021-07-29 17:13:42,769 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_UPDATE (needs: "Need(method='role', value='plugin_softwareupdate_update')") 2021-07-29 17:13:42,771 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CONFIGURE (needs: "Need(method='role', value='plugin_softwareupdate_configure')") 2021-07-29 17:13:44,150 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip 2021-07-29 17:13:45,131 - octoprint.util.pip - INFO - Version of pip is 20.3.3 2021-07-29 17:13:45,133 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2021-07-29 17:13:45,134 - octoprint.util.pip - INFO - ==> pip ok -> yes 2021-07-29 17:13:45,241 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk 2021-07-29 17:13:45,284 - octoprint.plugin.core - INFO - Initialized 19 plugin implementation(s) 2021-07-29 17:13:45,396 - octoprint.plugin.core - INFO - 19 plugin(s) registered with the system: | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/appkeys | Arc-Welder (1.0.0+u.bb71e8f) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_arc_welder | Backup & Restore (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/backup | Core Wizard (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/corewizard | Discovery (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/discovery | Error Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/errortracking | File Check (2021.2.23) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_file_check | Firmware Check (2021.5.31) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_firmware_check | GCode Viewer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/gcodeviewer | Logging (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/logging | OctoPrint-BuildBee (2.2.4) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_buildbee | Pi Support Plugin (2021.3.26.post2) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/pluginmanager | Software Update (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/softwareupdate | Virtual Printer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2021-07-29 17:13:45,429 - octoprint.environment - INFO - Detected environment is Python 3.7.3 under Linux (linux). Details: | hardware: | cores: 4 | freq: 1200.0 | ram: 915722240 | os: | bits: 32 | id: linux | platform: linux | plugins: | pi_support: | model: Raspberry Pi 3 Model B Rev 1.2 | octopi_version: 0.18.0 | throttle_state: '0x0' | python: | pip: 20.3.3 | version: 3.7.3 | virtualenv: /home/pi/oprint 2021-07-29 17:13:45,442 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/webassets... 2021-07-29 17:13:45,462 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-cache... 2021-07-29 17:13:46,688 - octoprint.server - INFO - Shutting down intermediary server... 2021-07-29 17:13:46,714 - octoprint.server - INFO - Intermediary server shut down 2021-07-29 17:13:46,717 - octoprint.events - INFO - Processing startup event, this is our first event 2021-07-29 17:13:46,717 - octoprint.events - INFO - Adding 1 events to queue that were held back before startup event 2021-07-29 17:13:46,718 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue... 2021-07-29 17:13:46,720 - octoprint.server - INFO - Autoconnect on startup is configured, trying to connect to the printer... 2021-07-29 17:13:46,728 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue 2021-07-29 17:13:46,778 - octoprint.server - INFO - Could not find configured serial port {} in the system, cannot automatically connect to a non existing printer. Is it plugged in and booted up yet? 2021-07-29 17:13:46,780 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder... 2021-07-29 17:13:46,782 - octoprint.server.util.watchdog - INFO - ... initial scan done. 2021-07-29 17:13:47,594 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on octopi._http._tcp.local.' for _http._tcp.local. 2021-07-29 17:13:48,410 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on octopi._octoprint._tcp.local.' for _octoprint._tcp.local. 2021-07-29 17:13:48,428 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance on octopi for SSDP 2021-07-29 17:13:48,581 - octoprint.plugins.BuildBee - INFO - Current user is pi 2021-07-29 17:13:48,583 - octoprint.plugins.BuildBee - WARNING - Cannot configure networks without passwordless sudo 2021-07-29 17:13:48,584 - octoprint.plugins.BuildBee - INFO - No owner syncing required 2021-07-29 17:13:48,586 - octoprint.plugins.BuildBee - INFO - My serial: 9243aa1b-6cc0-4ec5-9454-960b28edb66a 2021-07-29 17:13:48,911 - octoprint.plugins.BuildBee - ERROR - Couldn't install GPX plugin 2021-07-29 17:13:48,914 - octoprint.plugins.BuildBee - INFO - Base folder is /home/pi/oprint/lib/python3.7/site-packages/octoprint_buildbee 2021-07-29 17:13:48,915 - octoprint.plugins.BuildBee - INFO - Setting up static templates 2021-07-29 17:13:49,079 - octoprint.plugins.BuildBee - INFO - Injecting /home/pi/oprint/lib/python3.7/site-packages/octoprint_buildbee/templates/BuildBee_navbar.jinja2 templates 2021-07-29 17:13:49,130 - octoprint.server - INFO - Listening on http://127.0.0.1:5000 2021-07-29 17:13:49,322 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2021-07-29 17:13:50,368 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip 2021-07-29 17:13:50,383 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2021-07-29 17:13:50,399 - octoprint.util.pip - INFO - ==> pip ok -> yes 2021-07-29 17:13:50,475 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 4.5GB. That is considered sufficient for updating. 2021-07-29 17:13:50,482 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json 2021-07-29 17:13:51,310 - octoprint.plugins.BuildBee - INFO - Checking for rollback 2021-07-29 17:13:51,917 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2021-07-29 17:13:54,543 - octoprint.plugins.BuildBee - INFO - No rollback directive found 2021-07-29 17:13:54,613 - octoprint.plugins.BuildBee - INFO - Successfully found WiFi network. Given address: ['192.168.1.83'] 2021-07-29 17:13:54,616 - octoprint.plugins.BuildBee - INFO - PROXY DICT: {} 2021-07-29 17:13:54,617 - octoprint.plugins.BuildBee - INFO - Searching for an interface to preferentially route requests proxy session traffic though... 2021-07-29 17:13:54,618 - octoprint.plugins.BuildBee - INFO - Candidate interfaces {'eth0': {'ipv4': ['192.168.1.226'], 'ipv6': ['fe80::1437:617c:787c:6328']}, 'lo': {'ipv4': ['127.0.0.1'], 'ipv6': ['::1']}, 'wlan0': {'ipv4': ['192.168.1.83'], 'ipv6': ['fe80::7a94:d1f4:8a2:192b']}} 2021-07-29 17:13:54,620 - octoprint.plugins.BuildBee - INFO - Candidate interface names dict_keys(['eth0', 'lo', 'wlan0']) 2021-07-29 17:13:54,621 - octoprint.plugins.BuildBee - INFO - Interfaces with IPs ['eth0', 'lo', 'wlan0'] 2021-07-29 17:13:54,623 - octoprint.plugins.BuildBee - INFO - Interfaces with valid names ['eth0', 'wlan0'] 2021-07-29 17:13:54,625 - octoprint.plugins.BuildBee - INFO - Interfaces with valid IPs ['eth0', 'wlan0'] 2021-07-29 17:13:54,626 - octoprint.plugins.BuildBee - INFO - Attempting to bind proxy session traffic to eth0 2021-07-29 17:13:55,606 - octoprint.plugins.BuildBee - INFO - Reestablished connection to server 2021-07-29 17:13:55,609 - octoprint.plugins.BuildBee - INFO - DEVICE TYPE MODIFIED IN DATABASE: 2f2e3815-9b2d-4f79-9d98-9fe78e196281 2021-07-29 17:13:55,686 - octoprint.plugins.BuildBee - INFO - Updating registered printer profile 2021-07-29 17:13:58,033 - octoprint.plugins.BuildBee - INFO - Configuring as me3DMe2 2021-07-29 17:13:59,153 - octoprint.plugins.BuildBee - INFO - PROXY DICT: {} 2021-07-29 17:13:59,156 - octoprint.plugins.BuildBee - INFO - Searching for an interface to preferentially route requests proxy session traffic though... 2021-07-29 17:13:59,158 - octoprint.plugins.BuildBee - INFO - Candidate interfaces {'eth0': {'ipv4': ['192.168.1.226'], 'ipv6': ['fe80::1437:617c:787c:6328']}, 'lo': {'ipv4': ['127.0.0.1'], 'ipv6': ['::1']}, 'wlan0': {'ipv4': ['192.168.1.83'], 'ipv6': ['fe80::7a94:d1f4:8a2:192b']}} 2021-07-29 17:13:59,160 - octoprint.plugins.BuildBee - INFO - Candidate interface names dict_keys(['eth0', 'lo', 'wlan0']) 2021-07-29 17:13:59,162 - octoprint.plugins.BuildBee - INFO - Interfaces with IPs ['eth0', 'lo', 'wlan0'] 2021-07-29 17:13:59,165 - octoprint.plugins.BuildBee - INFO - Interfaces with valid names ['eth0', 'wlan0'] 2021-07-29 17:13:59,168 - octoprint.plugins.BuildBee - INFO - Interfaces with valid IPs ['eth0', 'wlan0'] 2021-07-29 17:13:59,171 - octoprint.plugins.BuildBee - INFO - Attempting to bind proxy session traffic to eth0 2021-07-29 17:23:50,282 - octoprint.plugins.BuildBee - INFO - Cleaning keys: ['lastConfigurationData'] 2021-07-29 17:23:51,322 - octoprint.plugins.BuildBee - INFO - Test connection successfully reached https://buildbee.com/proxy-test/payload.json 2021-07-29 17:25:54,463 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.198 2021-07-29 17:26:36,808 - tornado.access - WARNING - 403 POST /api/login (::ffff:192.168.1.198) 67.90ms 2021-07-29 17:27:08,189 - tornado.access - WARNING - 403 POST /api/login (::ffff:192.168.1.198) 17.93ms 2021-07-29 17:27:28,171 - tornado.access - WARNING - 403 POST /api/login (::ffff:192.168.1.198) 27.91ms 2021-07-29 17:28:01,878 - tornado.access - WARNING - 403 POST /api/login (::ffff:192.168.1.198) 60.03ms 2021-07-29 17:28:42,543 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2021-07-29 17:30:08,091 - tornado.access - WARNING - 403 POST /api/login (::ffff:192.168.1.198) 18.07ms 2021-07-29 17:30:52,101 - tornado.access - WARNING - 403 POST /api/login (::ffff:192.168.1.198) 19.06ms 2021-07-29 17:34:23,069 - octoprint.server.util.flask - INFO - Passively logging in user Ender3pro from ::ffff:192.168.1.53 2021-07-29 17:34:23,072 - octoprint.access.users - INFO - Logged in user: Ender3pro 2021-07-29 17:34:39,040 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.53 2021-07-29 17:34:39,071 - octoprint.server.util.flask - INFO - Passively logging in user Ender3pro from ::ffff:192.168.1.53 2021-07-29 17:34:39,078 - octoprint.access.users - INFO - Logged in user: Ender3pro 2021-07-29 17:34:42,117 - octoprint.server.util.sockjs - INFO - User Ender3pro logged in on the socket from client ::ffff:192.168.1.53 2021-07-29 17:34:42,753 - octoprint.server.util.sockjs - INFO - User Ender3pro logged out, logging out on socket 2021-07-29 17:34:42,756 - octoprint.access.users - INFO - Logged out user: Ender3pro 2021-07-29 17:34:43,014 - tornado.access - WARNING - 403 GET /api/settings (::ffff:192.168.1.53) 217.87ms 2021-07-29 17:34:43,159 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.53 2021-07-29 17:34:43,366 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.53 2021-07-29 17:34:52,933 - octoprint.access.users - INFO - Logged in user: Ender3pro 2021-07-29 17:34:52,942 - octoprint.server.api - INFO - Actively logging in user Ender3pro from ::ffff:192.168.1.53 2021-07-29 17:34:53,312 - octoprint.server.util.flask - INFO - Passively logging in user Ender3pro from ::ffff:192.168.1.53 2021-07-29 17:34:53,314 - octoprint.access.users - INFO - Logged in user: Ender3pro 2021-07-29 17:34:53,786 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.53 2021-07-29 17:34:53,999 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.53 2021-07-29 17:34:54,032 - octoprint.server.util.flask - INFO - Passively logging in user Ender3pro from ::ffff:192.168.1.53 2021-07-29 17:34:54,033 - octoprint.access.users - INFO - Logged in user: Ender3pro 2021-07-29 17:34:56,244 - octoprint.server.util.sockjs - INFO - User Ender3pro logged in on the socket from client ::ffff:192.168.1.53 2021-07-29 17:39:37,887 - octoprint.access.users - INFO - Logged in user: Ender3pro 2021-07-29 17:39:37,890 - octoprint.server.api - INFO - Actively logging in user Ender3pro from ::ffff:192.168.1.198 2021-07-29 17:39:38,044 - octoprint.server.util.flask - INFO - Passively logging in user Ender3pro from ::ffff:192.168.1.198 2021-07-29 17:39:38,045 - octoprint.access.users - INFO - Logged in user: Ender3pro 2021-07-29 17:39:38,082 - octoprint.server.util.flask.PreemptiveCache - INFO - Adding entry for / and {'path': '/', 'base_url': 'http://192.168.1.83/', 'query_string': 'l10n=en', '_timestamp': 1627576778.0824628, '_count': 1} 2021-07-29 17:39:38,133 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.198 2021-07-29 17:39:39,527 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.198 2021-07-29 17:39:39,562 - octoprint.server.util.flask - INFO - Passively logging in user Ender3pro from ::ffff:192.168.1.198 2021-07-29 17:39:39,564 - octoprint.access.users - INFO - Logged in user: Ender3pro 2021-07-29 17:39:43,331 - octoprint.server.util.sockjs - INFO - User Ender3pro logged in on the socket from client ::ffff:192.168.1.198 2021-07-29 17:39:54,769 - octoprint.plugins.softwareupdate - INFO - Starting update of pi_support to 2021.6.14... 2021-07-29 17:39:55,874 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip 2021-07-29 17:39:55,876 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2021-07-29 17:39:55,877 - octoprint.util.pip - INFO - ==> pip ok -> yes 2021-07-29 17:40:05,435 - octoprint.plugins.softwareupdate - INFO - Update of pi_support to 2021.6.14 successful! 2021-07-29 17:40:05,576 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk 2021-07-29 17:40:05,582 - octoprint.plugins.softwareupdate - INFO - Restarting... 2021-07-29 17:40:05,672 - octoprint.server - INFO - Shutting down... 2021-07-29 17:40:06,461 - octoprint.server - INFO - Calling on_shutdown on plugins 2021-07-29 17:40:06,464 - octoprint.events - INFO - Processing shutdown event, this will be our last event 2021-07-29 17:40:06,475 - octoprint.events - INFO - Event loop shut down 2021-07-29 17:40:07,002 - octoprint.server - INFO - Goodbye! 2021-07-29 17:40:09,486 - octoprint.startup - INFO - ****************************************************************************** 2021-07-29 17:40:09,489 - octoprint.startup - INFO - Starting OctoPrint 1.6.1 2021-07-29 17:40:09,490 - octoprint.startup - INFO - ****************************************************************************** 2021-07-29 17:40:09,958 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: online 2021-07-29 17:40:09,959 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 1.1.1.1:53 is working 2021-07-29 17:40:09,959 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is working 2021-07-29 17:40:10,017 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2021-07-29 17:40:18,711 - octoprint.plugin.core - INFO - Found 19 plugin(s) providing 19 mixin implementations, 38 hook handlers 2021-07-29 17:40:18,764 - octoprint.server.heartbeat - INFO - Starting server heartbeat, 900.0s interval 2021-07-29 17:40:18,774 - octoprint.server - INFO - Intermediary server started 2021-07-29 17:40:18,807 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/pi/.octoprint/uploads... 2021-07-29 17:40:18,810 - octoprint.filemanager.storage - INFO - ... file metadata for /home/pi/.octoprint/uploads initialized successfully. 2021-07-29 17:40:18,815 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_SHOW (needs: "Need(method='role', value='plugin_action_command_notification_show')") 2021-07-29 17:40:18,815 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_CLEAR (needs: "Need(method='role', value='plugin_action_command_notification_clear')") 2021-07-29 17:40:18,816 - octoprint.server - INFO - Added new permission from plugin action_command_prompt: PLUGIN_ACTION_COMMAND_PROMPT_INTERACT (needs: "Need(method='role', value='plugin_action_command_prompt_interact')") 2021-07-29 17:40:18,816 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_READ (needs: "Need(method='role', value='plugin_announcements_read')") 2021-07-29 17:40:18,817 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_MANAGE (needs: "Need(method='role', value='plugin_announcements_read'), Need(method='role', value='plugin_announcements_manage')") 2021-07-29 17:40:18,817 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_ADMIN (needs: "Need(method='role', value='plugin_appkeys_admin')") 2021-07-29 17:40:18,818 - octoprint.server - INFO - Added new permission from plugin backup: PLUGIN_BACKUP_ACCESS (needs: "Need(method='role', value='plugin_backup_access')") 2021-07-29 17:40:18,818 - octoprint.server - INFO - Added new permission from plugin firmware_check: PLUGIN_FIRMWARE_CHECK_DISPLAY (needs: "Need(method='role', value='plugin_firmware_check_display')") 2021-07-29 17:40:18,819 - octoprint.server - INFO - Added new permission from plugin logging: PLUGIN_LOGGING_MANAGE (needs: "Need(method='role', value='plugin_logging_manage')") 2021-07-29 17:40:18,819 - octoprint.server - INFO - Added new permission from plugin pi_support: PLUGIN_PI_SUPPORT_STATUS (needs: "Need(method='role', value='plugin_pi_support_check')") 2021-07-29 17:40:18,824 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_MANAGE (needs: "Need(method='role', value='plugin_pluginmanager_manage')") 2021-07-29 17:40:18,825 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_INSTALL (needs: "Need(method='role', value='plugin_pluginmanager_manage'), Need(method='role', value='plugin_pluginmanager_install')") 2021-07-29 17:40:18,825 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CHECK (needs: "Need(method='role', value='plugin_softwareupdate_check')") 2021-07-29 17:40:18,826 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_UPDATE (needs: "Need(method='role', value='plugin_softwareupdate_update')") 2021-07-29 17:40:18,826 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CONFIGURE (needs: "Need(method='role', value='plugin_softwareupdate_configure')") 2021-07-29 17:40:20,009 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip 2021-07-29 17:40:21,008 - octoprint.util.pip - INFO - Version of pip is 20.3.3 2021-07-29 17:40:21,010 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2021-07-29 17:40:21,010 - octoprint.util.pip - INFO - ==> pip ok -> yes 2021-07-29 17:40:21,114 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk 2021-07-29 17:40:21,166 - octoprint.plugin.core - INFO - Initialized 19 plugin implementation(s) 2021-07-29 17:40:21,272 - octoprint.plugin.core - INFO - 19 plugin(s) registered with the system: | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/appkeys | Arc-Welder (1.0.0+u.bb71e8f) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_arc_welder | Backup & Restore (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/backup | Core Wizard (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/corewizard | Discovery (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/discovery | Error Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/errortracking | File Check (2021.2.23) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_file_check | Firmware Check (2021.5.31) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_firmware_check | GCode Viewer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/gcodeviewer | Logging (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/logging | OctoPrint-BuildBee (2.2.4) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_buildbee | Pi Support Plugin (2021.6.14) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/pluginmanager | Software Update (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/softwareupdate | Virtual Printer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2021-07-29 17:40:21,310 - octoprint.environment - INFO - Detected environment is Python 3.7.3 under Linux (linux). Details: | hardware: | cores: 4 | freq: 1200.0 | ram: 915722240 | os: | bits: 32 | id: linux | platform: linux | plugins: | pi_support: | model: Raspberry Pi 3 Model B Rev 1.2 | octopi_version: 0.18.0 | throttle_state: '0x0' | python: | pip: 20.3.3 | version: 3.7.3 | virtualenv: /home/pi/oprint 2021-07-29 17:40:21,325 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/webassets... 2021-07-29 17:40:21,350 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-cache... 2021-07-29 17:40:22,487 - octoprint.server - INFO - Shutting down intermediary server... 2021-07-29 17:40:22,791 - octoprint.server - INFO - Intermediary server shut down 2021-07-29 17:40:22,793 - octoprint.events - INFO - Processing startup event, this is our first event 2021-07-29 17:40:22,794 - octoprint.events - INFO - Adding 1 events to queue that were held back before startup event 2021-07-29 17:40:22,797 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue... 2021-07-29 17:40:22,798 - octoprint.server - INFO - Autoconnect on startup is configured, trying to connect to the printer... 2021-07-29 17:40:22,801 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue 2021-07-29 17:40:22,849 - octoprint.server - INFO - Could not find configured serial port {} in the system, cannot automatically connect to a non existing printer. Is it plugged in and booted up yet? 2021-07-29 17:40:22,851 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder... 2021-07-29 17:40:22,854 - octoprint.server.util.watchdog - INFO - ... initial scan done. 2021-07-29 17:40:23,672 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on octopi._http._tcp.local.' for _http._tcp.local. 2021-07-29 17:40:24,498 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on octopi._octoprint._tcp.local.' for _octoprint._tcp.local. 2021-07-29 17:40:24,520 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance on octopi for SSDP 2021-07-29 17:40:24,641 - octoprint.plugins.BuildBee - INFO - Current user is pi 2021-07-29 17:40:24,642 - octoprint.plugins.BuildBee - WARNING - Cannot configure networks without passwordless sudo 2021-07-29 17:40:24,644 - octoprint.plugins.BuildBee - INFO - No owner syncing required 2021-07-29 17:40:24,645 - octoprint.plugins.BuildBee - INFO - My serial: 9243aa1b-6cc0-4ec5-9454-960b28edb66a 2021-07-29 17:40:24,994 - octoprint.plugins.BuildBee - ERROR - Couldn't install GPX plugin 2021-07-29 17:40:24,996 - octoprint.plugins.BuildBee - INFO - Base folder is /home/pi/oprint/lib/python3.7/site-packages/octoprint_buildbee 2021-07-29 17:40:24,998 - octoprint.plugins.BuildBee - INFO - Setting up static templates 2021-07-29 17:40:25,151 - octoprint.plugins.BuildBee - INFO - Injecting /home/pi/oprint/lib/python3.7/site-packages/octoprint_buildbee/templates/BuildBee_navbar.jinja2 templates 2021-07-29 17:40:25,217 - octoprint.server - INFO - Listening on http://127.0.0.1:5000 2021-07-29 17:40:25,407 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2021-07-29 17:40:25,810 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.53 2021-07-29 17:40:26,024 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.198 2021-07-29 17:40:26,189 - octoprint.server.util.flask - INFO - Passively logging in user Ender3pro from ::ffff:192.168.1.53 2021-07-29 17:40:26,202 - octoprint.access.users - INFO - Logged in user: Ender3pro 2021-07-29 17:40:26,378 - octoprint.server.util.flask - INFO - Passively logging in user Ender3pro from ::ffff:192.168.1.198 2021-07-29 17:40:26,380 - octoprint.access.users - INFO - Logged in user: Ender3pro 2021-07-29 17:40:26,464 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip 2021-07-29 17:40:26,480 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2021-07-29 17:40:26,481 - octoprint.util.pip - INFO - ==> pip ok -> yes 2021-07-29 17:40:26,546 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 4.5GB. That is considered sufficient for updating. 2021-07-29 17:40:26,563 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json 2021-07-29 17:40:28,515 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2021-07-29 17:40:29,496 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip 2021-07-29 17:40:29,503 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2021-07-29 17:40:29,504 - octoprint.util.pip - INFO - ==> pip ok -> yes 2021-07-29 17:40:29,750 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk 2021-07-29 17:40:29,752 - octoprint.plugins.BuildBee - INFO - Checking for rollback 2021-07-29 17:40:31,430 - octoprint.server.util.flask - INFO - Passively logging in user Ender3pro from ::ffff:192.168.1.198 2021-07-29 17:40:31,432 - octoprint.access.users - INFO - Logged in user: Ender3pro 2021-07-29 17:40:31,458 - octoprint.plugins.BuildBee - INFO - Cleaning keys: ['lastConfigurationData'] 2021-07-29 17:40:32,279 - octoprint.plugins.BuildBee - INFO - No rollback directive found 2021-07-29 17:40:44,058 - octoprint.plugins.BuildBee - INFO - PROXY DICT: {} 2021-07-29 17:40:44,061 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'http://192.168.1.83/', 'path': '/', 'query_string': 'l10n=en'} 2021-07-29 17:40:44,062 - octoprint.plugins.BuildBee - INFO - Searching for an interface to preferentially route requests proxy session traffic though... 2021-07-29 17:40:44,075 - octoprint.plugins.BuildBee - INFO - Candidate interfaces {'eth0': {'ipv4': ['192.168.1.226'], 'ipv6': ['fe80::1437:617c:787c:6328']}, 'lo': {'ipv4': ['127.0.0.1'], 'ipv6': ['::1']}, 'wlan0': {'ipv4': ['192.168.1.83'], 'ipv6': ['fe80::7a94:d1f4:8a2:192b']}} 2021-07-29 17:40:44,076 - octoprint.plugins.BuildBee - INFO - Candidate interface names dict_keys(['eth0', 'lo', 'wlan0']) 2021-07-29 17:40:44,078 - octoprint.plugins.BuildBee - INFO - Interfaces with IPs ['eth0', 'lo', 'wlan0'] 2021-07-29 17:40:44,079 - octoprint.plugins.BuildBee - INFO - Interfaces with valid names ['eth0', 'wlan0'] 2021-07-29 17:40:44,081 - octoprint.plugins.BuildBee - INFO - Interfaces with valid IPs ['eth0', 'wlan0'] 2021-07-29 17:40:44,082 - octoprint.plugins.BuildBee - INFO - Attempting to bind proxy session traffic to eth0 2021-07-29 17:40:44,845 - octoprint.server.preemptive_cache - INFO - ... done in 0.78s 2021-07-29 17:40:44,924 - octoprint.server.util.sockjs - INFO - User Ender3pro logged in on the socket from client ::ffff:192.168.1.53 2021-07-29 17:40:44,939 - octoprint.server.util.sockjs - INFO - User Ender3pro logged in on the socket from client ::ffff:192.168.1.198 2021-07-29 17:40:44,963 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.198 2021-07-29 17:40:45,605 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.198 2021-07-29 17:40:45,642 - octoprint.server.util.flask - INFO - Passively logging in user Ender3pro from ::ffff:192.168.1.198 2021-07-29 17:40:45,644 - octoprint.access.users - INFO - Logged in user: Ender3pro 2021-07-29 17:40:48,538 - octoprint.server.util.sockjs - INFO - User Ender3pro logged in on the socket from client ::ffff:192.168.1.198 2021-07-29 17:40:54,981 - octoprint.plugins.BuildBee - INFO - Test connection successfully reached https://buildbee.com/proxy-test/payload.json 2021-07-29 17:40:58,381 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2021-07-29 17:40:58,421 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 0 port/baudrate candidates: 2021-07-29 17:40:58,775 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Error" 2021-07-29 17:40:58,786 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2021-07-29 17:40:58,830 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2021-07-29 17:41:09,125 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2021-07-29 17:41:09,176 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 0 port/baudrate candidates: 2021-07-29 17:41:09,177 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Error" 2021-07-29 17:41:09,180 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2021-07-29 17:41:09,194 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2021-07-29 17:41:10,387 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2021-07-29 17:41:10,759 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 0 port/baudrate candidates: 2021-07-29 17:41:10,766 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Error" 2021-07-29 17:41:10,774 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2021-07-29 17:41:10,799 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2021-07-29 17:41:13,003 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2021-07-29 17:41:13,070 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 0 port/baudrate candidates: 2021-07-29 17:41:13,071 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Error" 2021-07-29 17:41:13,074 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2021-07-29 17:41:13,088 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2021-07-29 17:41:14,749 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2021-07-29 17:41:15,812 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2021-07-29 17:41:15,870 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 0 port/baudrate candidates: 2021-07-29 17:41:15,873 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Error" 2021-07-29 17:41:15,876 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2021-07-29 17:41:15,891 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2021-07-29 17:41:33,348 - octoprint.server.util.flask - INFO - Passively logging in user Ender3pro from ::ffff:192.168.1.198 2021-07-29 17:41:33,349 - octoprint.access.users - INFO - Logged in user: Ender3pro 2021-07-29 17:41:33,466 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.198 2021-07-29 17:41:34,502 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.198 2021-07-29 17:41:34,579 - octoprint.server.util.flask - INFO - Passively logging in user Ender3pro from ::ffff:192.168.1.198 2021-07-29 17:41:34,585 - octoprint.access.users - INFO - Logged in user: Ender3pro 2021-07-29 17:41:37,659 - octoprint.server.util.sockjs - INFO - User Ender3pro logged in on the socket from client ::ffff:192.168.1.198 2021-07-29 17:41:51,834 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2021-07-29 17:41:51,885 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 0 port/baudrate candidates: 2021-07-29 17:41:51,886 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Error" 2021-07-29 17:41:51,889 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2021-07-29 17:41:51,903 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2021-07-29 17:41:56,854 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2021-07-29 17:41:56,895 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 0 port/baudrate candidates: 2021-07-29 17:41:56,895 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Error" 2021-07-29 17:41:56,897 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2021-07-29 17:41:56,912 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2021-07-29 17:41:57,618 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2021-07-29 17:41:57,663 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 0 port/baudrate candidates: 2021-07-29 17:41:57,664 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Error" 2021-07-29 17:41:57,667 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2021-07-29 17:41:57,680 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2021-07-29 17:41:58,742 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2021-07-29 17:41:58,800 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 0 port/baudrate candidates: 2021-07-29 17:41:58,806 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Error" 2021-07-29 17:41:58,809 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2021-07-29 17:41:58,825 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2021-07-29 17:42:03,801 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2021-07-29 17:42:04,187 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 0 port/baudrate candidates: 2021-07-29 17:42:04,189 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Error" 2021-07-29 17:42:04,209 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2021-07-29 17:42:04,241 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2021-07-29 17:42:04,998 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2021-07-29 17:42:05,068 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 0 port/baudrate candidates: 2021-07-29 17:42:05,069 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Error" 2021-07-29 17:42:05,071 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2021-07-29 17:42:05,088 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2021-07-29 17:42:07,081 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2021-07-29 17:42:07,120 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 0 port/baudrate candidates: 2021-07-29 17:42:07,120 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Error" 2021-07-29 17:42:07,123 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2021-07-29 17:42:07,136 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2021-07-29 17:42:15,518 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2021-07-29 17:42:15,558 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 0 port/baudrate candidates: 2021-07-29 17:42:15,560 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Error" 2021-07-29 17:42:15,570 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2021-07-29 17:42:15,601 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2021-07-29 17:42:26,188 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2021-07-29 17:42:26,228 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 0 port/baudrate candidates: 2021-07-29 17:42:26,230 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Error" 2021-07-29 17:42:26,232 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2021-07-29 17:42:26,251 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2021-07-29 17:42:29,865 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2021-07-29 17:42:29,904 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 0 port/baudrate candidates: 2021-07-29 17:42:29,905 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Error" 2021-07-29 17:42:29,909 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2021-07-29 17:42:29,931 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2021-07-29 17:42:36,314 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2021-07-29 17:42:36,376 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 0 port/baudrate candidates: 2021-07-29 17:42:36,378 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Error" 2021-07-29 17:42:36,382 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2021-07-29 17:42:36,407 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2021-07-29 17:42:40,925 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2021-07-29 17:42:40,962 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 0 port/baudrate candidates: 2021-07-29 17:42:40,963 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Error" 2021-07-29 17:42:40,966 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2021-07-29 17:42:40,982 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2021-07-29 17:42:46,839 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2021-07-29 17:42:46,915 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 0 port/baudrate candidates: 2021-07-29 17:42:46,917 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Error" 2021-07-29 17:42:46,921 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2021-07-29 17:42:46,947 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2021-07-29 17:42:50,290 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2021-07-29 17:42:50,346 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 0 port/baudrate candidates: 2021-07-29 17:42:50,347 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Error" 2021-07-29 17:42:50,349 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2021-07-29 17:42:50,364 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2021-07-29 17:42:52,251 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2021-07-29 17:42:52,306 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 0 port/baudrate candidates: 2021-07-29 17:42:52,307 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Error" 2021-07-29 17:42:52,309 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2021-07-29 17:42:52,327 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2021-07-29 17:42:56,883 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2021-07-29 17:42:56,922 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 0 port/baudrate candidates: 2021-07-29 17:42:56,923 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Error" 2021-07-29 17:42:56,925 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2021-07-29 17:42:56,943 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2021-07-29 17:43:04,993 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2021-07-29 17:43:05,036 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 0 port/baudrate candidates: 2021-07-29 17:43:05,038 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Error" 2021-07-29 17:43:05,041 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2021-07-29 17:43:05,065 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2021-07-29 17:43:05,757 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2021-07-29 17:43:05,802 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 0 port/baudrate candidates: 2021-07-29 17:43:05,803 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Error" 2021-07-29 17:43:05,805 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2021-07-29 17:43:05,820 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2021-07-29 17:43:24,205 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2021-07-29 17:43:24,272 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 0 port/baudrate candidates: 2021-07-29 17:43:24,274 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Error" 2021-07-29 17:43:24,277 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2021-07-29 17:43:24,296 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2021-07-29 17:43:26,014 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2021-07-29 17:43:26,070 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 0 port/baudrate candidates: 2021-07-29 17:43:26,072 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Error" 2021-07-29 17:43:26,075 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2021-07-29 17:43:26,091 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2021-07-29 17:43:27,663 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2021-07-29 17:43:27,723 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 0 port/baudrate candidates: 2021-07-29 17:43:27,725 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Error" 2021-07-29 17:43:27,727 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2021-07-29 17:43:27,742 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2021-07-29 17:43:41,279 - octoprint.server.api.system - INFO - Performing command for core:restart: sudo service octoprint restart 2021-07-29 17:43:41,415 - octoprint.server - INFO - Shutting down... 2021-07-29 17:43:41,420 - octoprint.server.api.system - WARNING - Command for core:restart failed with return code -15: ! STDOUT: ! STDERR: 2021-07-29 17:43:41,804 - octoprint.server - INFO - Calling on_shutdown on plugins 2021-07-29 17:43:41,805 - octoprint.events - INFO - Processing shutdown event, this will be our last event 2021-07-29 17:43:41,812 - octoprint.events - INFO - Event loop shut down 2021-07-29 17:43:42,436 - octoprint.server - INFO - Goodbye! 2021-07-29 17:43:44,959 - octoprint.startup - INFO - ****************************************************************************** 2021-07-29 17:43:44,962 - octoprint.startup - INFO - Starting OctoPrint 1.6.1 2021-07-29 17:43:44,964 - octoprint.startup - INFO - ****************************************************************************** 2021-07-29 17:43:45,456 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: online 2021-07-29 17:43:45,457 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 1.1.1.1:53 is working 2021-07-29 17:43:45,458 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is working 2021-07-29 17:43:45,519 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2021-07-29 17:43:53,946 - octoprint.plugin.core - INFO - Found 19 plugin(s) providing 19 mixin implementations, 38 hook handlers 2021-07-29 17:43:54,000 - octoprint.server.heartbeat - INFO - Starting server heartbeat, 900.0s interval 2021-07-29 17:43:54,010 - octoprint.server - INFO - Intermediary server started 2021-07-29 17:43:54,043 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/pi/.octoprint/uploads... 2021-07-29 17:43:54,045 - octoprint.filemanager.storage - INFO - ... file metadata for /home/pi/.octoprint/uploads initialized successfully. 2021-07-29 17:43:54,050 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_SHOW (needs: "Need(method='role', value='plugin_action_command_notification_show')") 2021-07-29 17:43:54,051 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_CLEAR (needs: "Need(method='role', value='plugin_action_command_notification_clear')") 2021-07-29 17:43:54,051 - octoprint.server - INFO - Added new permission from plugin action_command_prompt: PLUGIN_ACTION_COMMAND_PROMPT_INTERACT (needs: "Need(method='role', value='plugin_action_command_prompt_interact')") 2021-07-29 17:43:54,052 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_READ (needs: "Need(method='role', value='plugin_announcements_read')") 2021-07-29 17:43:54,052 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_MANAGE (needs: "Need(method='role', value='plugin_announcements_read'), Need(method='role', value='plugin_announcements_manage')") 2021-07-29 17:43:54,053 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_ADMIN (needs: "Need(method='role', value='plugin_appkeys_admin')") 2021-07-29 17:43:54,053 - octoprint.server - INFO - Added new permission from plugin backup: PLUGIN_BACKUP_ACCESS (needs: "Need(method='role', value='plugin_backup_access')") 2021-07-29 17:43:54,054 - octoprint.server - INFO - Added new permission from plugin firmware_check: PLUGIN_FIRMWARE_CHECK_DISPLAY (needs: "Need(method='role', value='plugin_firmware_check_display')") 2021-07-29 17:43:54,054 - octoprint.server - INFO - Added new permission from plugin logging: PLUGIN_LOGGING_MANAGE (needs: "Need(method='role', value='plugin_logging_manage')") 2021-07-29 17:43:54,055 - octoprint.server - INFO - Added new permission from plugin pi_support: PLUGIN_PI_SUPPORT_STATUS (needs: "Need(method='role', value='plugin_pi_support_check')") 2021-07-29 17:43:54,055 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_MANAGE (needs: "Need(method='role', value='plugin_pluginmanager_manage')") 2021-07-29 17:43:54,057 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_INSTALL (needs: "Need(method='role', value='plugin_pluginmanager_manage'), Need(method='role', value='plugin_pluginmanager_install')") 2021-07-29 17:43:54,058 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CHECK (needs: "Need(method='role', value='plugin_softwareupdate_check')") 2021-07-29 17:43:54,060 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_UPDATE (needs: "Need(method='role', value='plugin_softwareupdate_update')") 2021-07-29 17:43:54,063 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CONFIGURE (needs: "Need(method='role', value='plugin_softwareupdate_configure')") 2021-07-29 17:43:55,238 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip 2021-07-29 17:43:56,239 - octoprint.util.pip - INFO - Version of pip is 20.3.3 2021-07-29 17:43:56,241 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2021-07-29 17:43:56,242 - octoprint.util.pip - INFO - ==> pip ok -> yes 2021-07-29 17:43:56,346 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk 2021-07-29 17:43:56,389 - octoprint.plugin.core - INFO - Initialized 19 plugin implementation(s) 2021-07-29 17:43:56,496 - octoprint.plugin.core - INFO - 19 plugin(s) registered with the system: | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/appkeys | Arc-Welder (1.0.0+u.bb71e8f) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_arc_welder | Backup & Restore (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/backup | Core Wizard (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/corewizard | Discovery (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/discovery | Error Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/errortracking | File Check (2021.2.23) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_file_check | Firmware Check (2021.5.31) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_firmware_check | GCode Viewer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/gcodeviewer | Logging (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/logging | OctoPrint-BuildBee (2.2.4) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_buildbee | Pi Support Plugin (2021.6.14) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/pluginmanager | Software Update (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/softwareupdate | Virtual Printer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2021-07-29 17:43:56,531 - octoprint.environment - INFO - Detected environment is Python 3.7.3 under Linux (linux). Details: | hardware: | cores: 4 | freq: 1200.0 | ram: 915722240 | os: | bits: 32 | id: linux | platform: linux | plugins: | pi_support: | model: Raspberry Pi 3 Model B Rev 1.2 | octopi_version: 0.18.0 | throttle_state: '0x0' | python: | pip: 20.3.3 | version: 3.7.3 | virtualenv: /home/pi/oprint 2021-07-29 17:43:56,546 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/webassets... 2021-07-29 17:43:56,571 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-cache... 2021-07-29 17:43:57,721 - octoprint.server - INFO - Shutting down intermediary server... 2021-07-29 17:43:57,876 - octoprint.server - INFO - Intermediary server shut down 2021-07-29 17:43:57,879 - octoprint.events - INFO - Processing startup event, this is our first event 2021-07-29 17:43:57,880 - octoprint.events - INFO - Adding 1 events to queue that were held back before startup event 2021-07-29 17:43:57,884 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue... 2021-07-29 17:43:57,885 - octoprint.server - INFO - Autoconnect on startup is configured, trying to connect to the printer... 2021-07-29 17:43:57,887 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue 2021-07-29 17:43:57,935 - octoprint.server - INFO - Could not find configured serial port {} in the system, cannot automatically connect to a non existing printer. Is it plugged in and booted up yet? 2021-07-29 17:43:57,938 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder... 2021-07-29 17:43:57,940 - octoprint.server.util.watchdog - INFO - ... initial scan done. 2021-07-29 17:43:58,768 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on octopi._http._tcp.local.' for _http._tcp.local. 2021-07-29 17:43:59,593 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on octopi._octoprint._tcp.local.' for _octoprint._tcp.local. 2021-07-29 17:43:59,614 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance on octopi for SSDP 2021-07-29 17:43:59,732 - octoprint.plugins.BuildBee - INFO - Current user is pi 2021-07-29 17:43:59,733 - octoprint.plugins.BuildBee - WARNING - Cannot configure networks without passwordless sudo 2021-07-29 17:43:59,735 - octoprint.plugins.BuildBee - INFO - No owner syncing required 2021-07-29 17:43:59,736 - octoprint.plugins.BuildBee - INFO - My serial: 9243aa1b-6cc0-4ec5-9454-960b28edb66a 2021-07-29 17:44:00,064 - octoprint.plugins.BuildBee - ERROR - Couldn't install GPX plugin 2021-07-29 17:44:00,067 - octoprint.plugins.BuildBee - INFO - Base folder is /home/pi/oprint/lib/python3.7/site-packages/octoprint_buildbee 2021-07-29 17:44:00,068 - octoprint.plugins.BuildBee - INFO - Setting up static templates 2021-07-29 17:44:00,232 - octoprint.plugins.BuildBee - INFO - Injecting /home/pi/oprint/lib/python3.7/site-packages/octoprint_buildbee/templates/BuildBee_navbar.jinja2 templates 2021-07-29 17:44:00,284 - octoprint.server - INFO - Listening on http://127.0.0.1:5000 2021-07-29 17:44:00,361 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.53 2021-07-29 17:44:00,725 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2021-07-29 17:44:00,882 - octoprint.server.util.flask - INFO - Passively logging in user Ender3pro from ::ffff:192.168.1.53 2021-07-29 17:44:00,888 - octoprint.access.users - INFO - Logged in user: Ender3pro 2021-07-29 17:44:01,621 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip 2021-07-29 17:44:01,624 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2021-07-29 17:44:01,625 - octoprint.util.pip - INFO - ==> pip ok -> yes 2021-07-29 17:44:01,707 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 4.5GB. That is considered sufficient for updating. 2021-07-29 17:44:01,714 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json 2021-07-29 17:44:02,482 - octoprint.plugins.BuildBee - INFO - Checking for rollback 2021-07-29 17:44:03,694 - octoprint.plugins.BuildBee - INFO - No rollback directive found 2021-07-29 17:44:03,801 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2021-07-29 17:44:04,342 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.198 2021-07-29 17:44:04,529 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.198 2021-07-29 17:44:04,573 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.198 2021-07-29 17:44:04,641 - octoprint.plugins.BuildBee - INFO - PROXY DICT: {} 2021-07-29 17:44:04,644 - octoprint.plugins.BuildBee - INFO - Searching for an interface to preferentially route requests proxy session traffic though... 2021-07-29 17:44:04,656 - octoprint.plugins.BuildBee - INFO - Candidate interfaces {'eth0': {'ipv4': ['192.168.1.226'], 'ipv6': ['fe80::1437:617c:787c:6328']}, 'lo': {'ipv4': ['127.0.0.1'], 'ipv6': ['::1']}, 'wlan0': {'ipv4': ['192.168.1.83'], 'ipv6': ['fe80::7a94:d1f4:8a2:192b']}} 2021-07-29 17:44:04,656 - octoprint.plugins.BuildBee - INFO - Candidate interface names dict_keys(['eth0', 'lo', 'wlan0']) 2021-07-29 17:44:04,663 - octoprint.plugins.BuildBee - INFO - Interfaces with IPs ['eth0', 'lo', 'wlan0'] 2021-07-29 17:44:04,678 - octoprint.plugins.BuildBee - INFO - Interfaces with valid names ['eth0', 'wlan0'] 2021-07-29 17:44:04,683 - octoprint.plugins.BuildBee - INFO - Interfaces with valid IPs ['eth0', 'wlan0'] 2021-07-29 17:44:04,692 - octoprint.plugins.BuildBee - INFO - Attempting to bind proxy session traffic to eth0 2021-07-29 17:44:04,734 - octoprint.plugins.BuildBee - INFO - Cleaning keys: ['lastConfigurationData'] 2021-07-29 17:44:04,793 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'http://192.168.1.83/', 'path': '/', 'query_string': 'l10n=en'} 2021-07-29 17:44:05,692 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.198 2021-07-29 17:44:05,807 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.198 2021-07-29 17:44:05,845 - octoprint.server.util.sockjs - INFO - User Ender3pro logged in on the socket from client ::ffff:192.168.1.53 2021-07-29 17:44:05,859 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.198 2021-07-29 17:44:05,864 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.198 2021-07-29 17:44:05,877 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.198 2021-07-29 17:44:07,019 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.198 2021-07-29 17:44:07,211 - octoprint.plugins.BuildBee - INFO - PROXY DICT: {} 2021-07-29 17:44:07,215 - octoprint.plugins.BuildBee - INFO - Searching for an interface to preferentially route requests proxy session traffic though... 2021-07-29 17:44:07,217 - octoprint.plugins.BuildBee - INFO - Candidate interfaces {'eth0': {'ipv4': ['192.168.1.226'], 'ipv6': ['fe80::1437:617c:787c:6328']}, 'lo': {'ipv4': ['127.0.0.1'], 'ipv6': ['::1']}, 'wlan0': {'ipv4': ['192.168.1.83'], 'ipv6': ['fe80::7a94:d1f4:8a2:192b']}} 2021-07-29 17:44:07,220 - octoprint.plugins.BuildBee - INFO - Candidate interface names dict_keys(['eth0', 'lo', 'wlan0']) 2021-07-29 17:44:07,224 - octoprint.plugins.BuildBee - INFO - Interfaces with IPs ['eth0', 'lo', 'wlan0'] 2021-07-29 17:44:07,230 - octoprint.plugins.BuildBee - INFO - Interfaces with valid names ['eth0', 'wlan0'] 2021-07-29 17:44:07,235 - octoprint.plugins.BuildBee - INFO - Interfaces with valid IPs ['eth0', 'wlan0'] 2021-07-29 17:44:07,237 - octoprint.plugins.BuildBee - INFO - Attempting to bind proxy session traffic to eth0 2021-07-29 17:44:07,256 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.198 2021-07-29 17:44:07,333 - octoprint.server.util.flask - INFO - Passively logging in user Ender3pro from ::ffff:192.168.1.198 2021-07-29 17:44:07,340 - octoprint.access.users - INFO - Logged in user: Ender3pro 2021-07-29 17:44:12,318 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2021-07-29 17:44:12,433 - octoprint.server.util.sockjs - INFO - User Ender3pro logged in on the socket from client ::ffff:192.168.1.198 2021-07-29 17:44:12,463 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.198 2021-07-29 17:44:13,272 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 0 port/baudrate candidates: 2021-07-29 17:44:13,273 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Error" 2021-07-29 17:44:13,293 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2021-07-29 17:44:13,313 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2021-07-29 17:44:15,734 - octoprint.plugins.BuildBee - INFO - Test connection successfully reached https://buildbee.com/proxy-test/payload.json 2021-07-29 17:44:26,219 - octoprint.server.preemptive_cache - INFO - ... done in 21.43s 2021-07-29 17:40:27,224 - octoprint.startup - INFO - ****************************************************************************** 2021-07-29 17:40:27,227 - octoprint.startup - INFO - Starting OctoPrint 1.6.1 2021-07-29 17:40:27,229 - octoprint.startup - INFO - ****************************************************************************** 2021-07-29 17:40:28,059 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: online 2021-07-29 17:40:28,061 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 1.1.1.1:53 is working 2021-07-29 17:40:28,061 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is working 2021-07-29 17:40:28,193 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2021-07-29 17:40:31,781 - octoprint.plugin.core - INFO - Found 19 plugin(s) providing 19 mixin implementations, 38 hook handlers 2021-07-29 17:40:31,862 - octoprint.server.heartbeat - INFO - Starting server heartbeat, 900.0s interval 2021-07-29 17:40:31,898 - octoprint.server - INFO - Intermediary server started 2021-07-29 17:40:31,934 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/pi/.octoprint/uploads... 2021-07-29 17:40:31,938 - octoprint.filemanager.storage - INFO - ... file metadata for /home/pi/.octoprint/uploads initialized successfully. 2021-07-29 17:40:31,944 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_SHOW (needs: "Need(method='role', value='plugin_action_command_notification_show')") 2021-07-29 17:40:31,944 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_CLEAR (needs: "Need(method='role', value='plugin_action_command_notification_clear')") 2021-07-29 17:40:31,945 - octoprint.server - INFO - Added new permission from plugin action_command_prompt: PLUGIN_ACTION_COMMAND_PROMPT_INTERACT (needs: "Need(method='role', value='plugin_action_command_prompt_interact')") 2021-07-29 17:40:31,945 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_READ (needs: "Need(method='role', value='plugin_announcements_read')") 2021-07-29 17:40:31,946 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_MANAGE (needs: "Need(method='role', value='plugin_announcements_manage'), Need(method='role', value='plugin_announcements_read')") 2021-07-29 17:40:31,946 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_ADMIN (needs: "Need(method='role', value='plugin_appkeys_admin')") 2021-07-29 17:40:31,947 - octoprint.server - INFO - Added new permission from plugin backup: PLUGIN_BACKUP_ACCESS (needs: "Need(method='role', value='plugin_backup_access')") 2021-07-29 17:40:31,947 - octoprint.server - INFO - Added new permission from plugin firmware_check: PLUGIN_FIRMWARE_CHECK_DISPLAY (needs: "Need(method='role', value='plugin_firmware_check_display')") 2021-07-29 17:40:31,948 - octoprint.server - INFO - Added new permission from plugin logging: PLUGIN_LOGGING_MANAGE (needs: "Need(method='role', value='plugin_logging_manage')") 2021-07-29 17:40:31,948 - octoprint.server - INFO - Added new permission from plugin pi_support: PLUGIN_PI_SUPPORT_STATUS (needs: "Need(method='role', value='plugin_pi_support_check')") 2021-07-29 17:40:31,949 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_MANAGE (needs: "Need(method='role', value='plugin_pluginmanager_manage')") 2021-07-29 17:40:31,952 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_INSTALL (needs: "Need(method='role', value='plugin_pluginmanager_install'), Need(method='role', value='plugin_pluginmanager_manage')") 2021-07-29 17:40:31,954 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CHECK (needs: "Need(method='role', value='plugin_softwareupdate_check')") 2021-07-29 17:40:31,955 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_UPDATE (needs: "Need(method='role', value='plugin_softwareupdate_update')") 2021-07-29 17:40:31,957 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CONFIGURE (needs: "Need(method='role', value='plugin_softwareupdate_configure')") 2021-07-29 17:40:33,528 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip 2021-07-29 17:40:34,522 - octoprint.util.pip - INFO - Version of pip is 20.3.3 2021-07-29 17:40:34,525 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2021-07-29 17:40:34,525 - octoprint.util.pip - INFO - ==> pip ok -> yes 2021-07-29 17:40:34,632 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk 2021-07-29 17:40:34,676 - octoprint.plugin.core - INFO - Initialized 19 plugin implementation(s) 2021-07-29 17:40:34,786 - octoprint.plugin.core - INFO - 19 plugin(s) registered with the system: | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/appkeys | Arc-Welder (1.0.0+u.bb71e8f) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_arc_welder | Backup & Restore (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/backup | Core Wizard (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/corewizard | Discovery (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/discovery | Error Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/errortracking | File Check (2021.2.23) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_file_check | Firmware Check (2021.5.31) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_firmware_check | GCode Viewer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/gcodeviewer | Logging (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/logging | OctoPrint-BuildBee (2.2.4) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_buildbee | Pi Support Plugin (2021.6.14) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/pluginmanager | Software Update (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/softwareupdate | Virtual Printer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2021-07-29 17:40:34,822 - octoprint.environment - INFO - Detected environment is Python 3.7.3 under Linux (linux). Details: | hardware: | cores: 4 | freq: 1200.0 | ram: 915722240 | os: | bits: 32 | id: linux | platform: linux | plugins: | pi_support: | model: Raspberry Pi 3 Model B Rev 1.2 | octopi_version: 0.18.0 | throttle_state: '0x0' | python: | pip: 20.3.3 | version: 3.7.3 | virtualenv: /home/pi/oprint 2021-07-29 17:40:34,835 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/webassets... 2021-07-29 17:40:34,852 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-cache... 2021-07-29 17:40:36,107 - octoprint.server - INFO - Shutting down intermediary server... 2021-07-29 17:40:36,412 - octoprint.server - INFO - Intermediary server shut down 2021-07-29 17:40:36,414 - octoprint.events - INFO - Processing startup event, this is our first event 2021-07-29 17:40:36,415 - octoprint.events - INFO - Adding 1 events to queue that were held back before startup event 2021-07-29 17:40:36,419 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue... 2021-07-29 17:40:36,420 - octoprint.server - INFO - Autoconnect on startup is configured, trying to connect to the printer... 2021-07-29 17:40:36,450 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue 2021-07-29 17:40:36,470 - octoprint.server - INFO - Trying to connect to configured serial port AUTO 2021-07-29 17:40:36,526 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2021-07-29 17:40:36,534 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder... 2021-07-29 17:40:36,537 - octoprint.server.util.watchdog - INFO - ... initial scan done. 2021-07-29 17:40:36,564 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 0 port/baudrate candidates: 2021-07-29 17:40:36,565 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Error" 2021-07-29 17:40:36,567 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2021-07-29 17:40:36,574 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2021-07-29 17:40:37,372 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on octopi._http._tcp.local.' for _http._tcp.local. 2021-07-29 17:40:38,186 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on octopi._octoprint._tcp.local.' for _octoprint._tcp.local. 2021-07-29 17:40:38,206 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance on octopi for SSDP 2021-07-29 17:40:38,362 - octoprint.plugins.BuildBee - INFO - Current user is pi 2021-07-29 17:40:38,364 - octoprint.plugins.BuildBee - WARNING - Cannot configure networks without passwordless sudo 2021-07-29 17:40:38,366 - octoprint.plugins.BuildBee - INFO - No owner syncing required 2021-07-29 17:40:38,367 - octoprint.plugins.BuildBee - INFO - My serial: 9243aa1b-6cc0-4ec5-9454-960b28edb66a 2021-07-29 17:40:38,701 - octoprint.plugins.BuildBee - ERROR - Couldn't install GPX plugin 2021-07-29 17:40:38,705 - octoprint.plugins.BuildBee - INFO - Base folder is /home/pi/oprint/lib/python3.7/site-packages/octoprint_buildbee 2021-07-29 17:40:38,707 - octoprint.plugins.BuildBee - INFO - Setting up static templates 2021-07-29 17:40:38,873 - octoprint.plugins.BuildBee - INFO - Injecting /home/pi/oprint/lib/python3.7/site-packages/octoprint_buildbee/templates/BuildBee_navbar.jinja2 templates 2021-07-29 17:40:38,918 - octoprint.server - INFO - Listening on http://127.0.0.1:5000 2021-07-29 17:40:39,116 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2021-07-29 17:40:40,204 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip 2021-07-29 17:40:40,206 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2021-07-29 17:40:40,225 - octoprint.util.pip - INFO - ==> pip ok -> yes 2021-07-29 17:40:40,345 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 4.5GB. That is considered sufficient for updating. 2021-07-29 17:40:40,356 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json 2021-07-29 17:40:41,252 - octoprint.plugins.BuildBee - INFO - Checking for rollback 2021-07-29 17:40:41,725 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2021-07-29 17:40:42,585 - octoprint.plugins.BuildBee - INFO - No rollback directive found 2021-07-29 17:40:42,775 - octoprint.plugins.BuildBee - INFO - Successfully found WiFi network. Given address: ['192.168.1.83'] 2021-07-29 17:40:42,777 - octoprint.plugins.BuildBee - INFO - PROXY DICT: {} 2021-07-29 17:40:42,780 - octoprint.plugins.BuildBee - INFO - Searching for an interface to preferentially route requests proxy session traffic though... 2021-07-29 17:40:42,783 - octoprint.plugins.BuildBee - INFO - Candidate interfaces {'eth0': {'ipv4': ['192.168.1.226'], 'ipv6': ['fe80::1437:617c:787c:6328']}, 'lo': {'ipv4': ['127.0.0.1'], 'ipv6': ['::1']}, 'wlan0': {'ipv4': ['192.168.1.83'], 'ipv6': ['fe80::7a94:d1f4:8a2:192b']}} 2021-07-29 17:40:42,785 - octoprint.plugins.BuildBee - INFO - Candidate interface names dict_keys(['eth0', 'lo', 'wlan0']) 2021-07-29 17:40:42,787 - octoprint.plugins.BuildBee - INFO - Interfaces with IPs ['eth0', 'lo', 'wlan0'] 2021-07-29 17:40:42,790 - octoprint.plugins.BuildBee - INFO - Interfaces with valid names ['eth0', 'wlan0'] 2021-07-29 17:40:42,798 - octoprint.plugins.BuildBee - INFO - Interfaces with valid IPs ['eth0', 'wlan0'] 2021-07-29 17:40:42,804 - octoprint.plugins.BuildBee - INFO - Attempting to bind proxy session traffic to eth0 2021-07-29 17:40:42,826 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'http://192.168.1.83/', 'path': '/', 'query_string': 'l10n=en'} 2021-07-29 17:40:43,115 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.53 2021-07-29 17:40:43,183 - octoprint.server.util.flask - INFO - Passively logging in user Ender3pro from ::ffff:192.168.1.53 2021-07-29 17:40:43,185 - octoprint.access.users - INFO - Logged in user: Ender3pro 2021-07-29 17:40:43,646 - octoprint.plugins.BuildBee - INFO - Reestablished connection to server 2021-07-29 17:40:43,648 - octoprint.plugins.BuildBee - INFO - DEVICE TYPE MODIFIED IN DATABASE: 2f2e3815-9b2d-4f79-9d98-9fe78e196281 2021-07-29 17:40:43,737 - octoprint.plugins.BuildBee - INFO - Updating registered printer profile 2021-07-29 17:40:44,712 - octoprint.server.util.sockjs - INFO - User Ender3pro logged in on the socket from client ::ffff:192.168.1.53 2021-07-29 17:40:46,243 - octoprint.plugins.BuildBee - INFO - Configuring as me3DMe2 2021-07-29 17:40:47,518 - octoprint.plugins.BuildBee - INFO - PROXY DICT: {} 2021-07-29 17:40:47,527 - octoprint.plugins.BuildBee - INFO - Searching for an interface to preferentially route requests proxy session traffic though... 2021-07-29 17:40:47,553 - octoprint.plugins.BuildBee - INFO - Candidate interfaces {'eth0': {'ipv4': ['192.168.1.226'], 'ipv6': ['fe80::1437:617c:787c:6328']}, 'lo': {'ipv4': ['127.0.0.1'], 'ipv6': ['::1']}, 'wlan0': {'ipv4': ['192.168.1.83'], 'ipv6': ['fe80::7a94:d1f4:8a2:192b']}} 2021-07-29 17:40:47,580 - octoprint.plugins.BuildBee - INFO - Candidate interface names dict_keys(['eth0', 'lo', 'wlan0']) 2021-07-29 17:40:47,607 - octoprint.plugins.BuildBee - INFO - Interfaces with IPs ['eth0', 'lo', 'wlan0'] 2021-07-29 17:40:47,613 - octoprint.plugins.BuildBee - INFO - Interfaces with valid names ['eth0', 'wlan0'] 2021-07-29 17:40:47,630 - octoprint.plugins.BuildBee - INFO - Interfaces with valid IPs ['eth0', 'wlan0'] 2021-07-29 17:40:47,657 - octoprint.plugins.BuildBee - INFO - Attempting to bind proxy session traffic to eth0 2021-07-29 17:45:21,471 - octoprint.plugins.BuildBee - INFO - Test connection successfully reached https://buildbee.com/proxy-test/payload.json 2021-07-29 17:45:21,735 - octoprint.plugins.BuildBee - INFO - Cleaning keys: ['lastConfigurationData'] 2021-07-29 17:45:30,212 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2021-07-29 17:45:30,365 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 0 port/baudrate candidates: 2021-07-29 17:45:30,372 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Error" 2021-07-29 17:45:30,377 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2021-07-29 17:45:30,399 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2021-07-29 17:45:32,069 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2021-07-29 17:45:32,131 - octoprint.server.preemptive_cache - INFO - ... done in 21.72s 2021-07-29 17:45:32,150 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 0 port/baudrate candidates: 2021-07-29 17:45:32,151 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Error" 2021-07-29 17:45:32,153 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2021-07-29 17:45:32,164 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2021-07-29 17:45:45,808 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2021-07-29 17:45:45,855 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 0 port/baudrate candidates: 2021-07-29 17:45:45,857 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Error" 2021-07-29 17:45:45,860 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2021-07-29 17:45:45,872 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2021-07-29 17:45:48,603 - octoprint.plugins.BuildBee - INFO - Could not find Wifi network. Attempting Ethernet 2021-07-29 17:45:48,750 - octoprint.plugins.BuildBee - INFO - PROXY DICT: {} 2021-07-29 17:45:48,751 - octoprint.plugins.BuildBee - INFO - Searching for an interface to preferentially route requests proxy session traffic though... 2021-07-29 17:45:48,753 - octoprint.plugins.BuildBee - INFO - Candidate interfaces {'eth0': {'ipv4': ['192.168.1.226'], 'ipv6': ['fe80::1437:617c:787c:6328']}, 'lo': {'ipv4': ['127.0.0.1'], 'ipv6': ['::1']}, 'wlan0': {'ipv4': [], 'ipv6': ['fe80::7a94:d1f4:8a2:192b']}} 2021-07-29 17:45:48,754 - octoprint.plugins.BuildBee - INFO - Candidate interface names dict_keys(['eth0', 'lo', 'wlan0']) 2021-07-29 17:45:48,755 - octoprint.plugins.BuildBee - INFO - Interfaces with IPs ['eth0', 'lo'] 2021-07-29 17:45:48,756 - octoprint.plugins.BuildBee - INFO - Interfaces with valid names ['eth0'] 2021-07-29 17:45:48,758 - octoprint.plugins.BuildBee - INFO - Interfaces with valid IPs ['eth0'] 2021-07-29 17:45:48,759 - octoprint.plugins.BuildBee - INFO - Attempting to bind proxy session traffic to eth0 2021-07-29 17:45:59,646 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2021-07-29 17:45:59,721 - octoprint.plugins.BuildBee - INFO - Successfully found WiFi network. Given address: ['192.168.1.83'] 2021-07-29 17:45:59,991 - octoprint.plugins.BuildBee - INFO - PROXY DICT: {} 2021-07-29 17:45:59,993 - octoprint.plugins.BuildBee - INFO - Searching for an interface to preferentially route requests proxy session traffic though... 2021-07-29 17:45:59,995 - octoprint.plugins.BuildBee - INFO - Candidate interfaces {'eth0': {'ipv4': ['192.168.1.226'], 'ipv6': ['fe80::1437:617c:787c:6328']}, 'lo': {'ipv4': ['127.0.0.1'], 'ipv6': ['::1']}, 'wlan0': {'ipv4': ['192.168.1.83'], 'ipv6': ['fe80::7a94:d1f4:8a2:192b']}} 2021-07-29 17:45:59,996 - octoprint.plugins.BuildBee - INFO - Candidate interface names dict_keys(['eth0', 'lo', 'wlan0']) 2021-07-29 17:45:59,998 - octoprint.plugins.BuildBee - INFO - Interfaces with IPs ['eth0', 'lo', 'wlan0'] 2021-07-29 17:46:00,000 - octoprint.plugins.BuildBee - INFO - Interfaces with valid names ['eth0', 'wlan0'] 2021-07-29 17:46:00,002 - octoprint.plugins.BuildBee - INFO - Interfaces with valid IPs ['eth0', 'wlan0'] 2021-07-29 17:46:00,004 - octoprint.plugins.BuildBee - INFO - Attempting to bind proxy session traffic to eth0 2021-07-29 17:46:00,536 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 0 port/baudrate candidates: 2021-07-29 17:46:00,547 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Error" 2021-07-29 17:46:00,555 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2021-07-29 17:46:00,610 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2021-07-29 17:46:02,507 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.198 2021-07-29 17:46:02,597 - octoprint.server.util.flask - INFO - Passively logging in user Ender3pro from ::ffff:192.168.1.198 2021-07-29 17:46:02,604 - octoprint.access.users - INFO - Logged in user: Ender3pro 2021-07-29 17:46:04,441 - octoprint.server.util.flask - INFO - Passively logging in user Ender3pro from ::ffff:192.168.1.198 2021-07-29 17:46:04,442 - octoprint.access.users - INFO - Logged in user: Ender3pro 2021-07-29 17:46:04,603 - octoprint.server.util.sockjs - INFO - User Ender3pro logged in on the socket from client ::ffff:192.168.1.198 2021-07-29 17:46:04,618 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.198 2021-07-29 17:46:05,406 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.198 2021-07-29 17:46:05,437 - octoprint.server.util.flask - INFO - Passively logging in user Ender3pro from ::ffff:192.168.1.198 2021-07-29 17:46:05,439 - octoprint.access.users - INFO - Logged in user: Ender3pro 2021-07-29 17:46:07,401 - octoprint.server.util.sockjs - INFO - User Ender3pro logged in on the socket from client ::ffff:192.168.1.198 2021-07-29 17:46:25,291 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2021-07-29 17:46:25,341 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 0 port/baudrate candidates: 2021-07-29 17:46:25,342 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Error" 2021-07-29 17:46:25,344 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2021-07-29 17:46:25,365 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2021-07-29 17:46:47,780 - octoprint.plugins.BuildBee - INFO - Re-enabling BuildBee UI 2021-07-29 17:46:48,001 - octoprint.server.util.flask - INFO - Passively logging in user Ender3pro from ::ffff:192.168.1.198 2021-07-29 17:46:48,003 - octoprint.access.users - INFO - Logged in user: Ender3pro 2021-07-29 17:46:48,116 - octoprint.server.util.flask.PreemptiveCache - INFO - Adding entry for / and {'path': '/', 'base_url': 'http://192.168.1.83/', 'query_string': 'l10n=en', 'plugin': 'BuildBee', '_timestamp': 1627577208.1160533, '_count': 1} 2021-07-29 17:46:48,642 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.198 2021-07-29 17:47:14,136 - octoprint.server.util.flask - INFO - Passively logging in user Ender3pro from ::ffff:192.168.1.198 2021-07-29 17:47:14,137 - octoprint.access.users - INFO - Logged in user: Ender3pro 2021-07-29 17:47:41,052 - octoprint.plugins.BuildBee - INFO - Disabling BuildBee UI 2021-07-29 17:47:41,616 - octoprint.server.util.flask - INFO - Passively logging in user Ender3pro from ::ffff:192.168.1.198 2021-07-29 17:47:41,633 - octoprint.access.users - INFO - Logged in user: Ender3pro 2021-07-29 17:47:43,518 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.198 2021-07-29 17:47:43,588 - octoprint.server.util.flask - INFO - Passively logging in user Ender3pro from ::ffff:192.168.1.198 2021-07-29 17:47:43,595 - octoprint.access.users - INFO - Logged in user: Ender3pro 2021-07-29 17:47:46,435 - octoprint.server.util.sockjs - INFO - User Ender3pro logged in on the socket from client ::ffff:192.168.1.198 2021-07-29 17:47:48,686 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2021-07-29 17:47:48,911 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 0 port/baudrate candidates: 2021-07-29 17:47:48,912 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Error" 2021-07-29 17:47:48,915 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2021-07-29 17:47:48,930 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2021-07-29 17:48:12,430 - octoprint.plugins.BuildBee - INFO - Connecting to printer on device /dev/ttyACM0 2021-07-29 17:48:12,488 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Opening serial connection" 2021-07-29 17:48:12,499 - octoprint.util.comm - INFO - Connecting to port /dev/ttyACM0, baudrate 250000 2021-07-29 17:48:12,513 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial connection" to "Connecting" 2021-07-29 17:48:12,519 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2021-07-29 17:48:23,246 - octoprint.plugins.BuildBee - WARNING - Adding /dev/ttyACM0 to serial ignore due to timeout 2021-07-29 17:48:23,288 - octoprint.util.comm - INFO - Changing monitoring state from "Connecting" to "Offline" 2021-07-29 17:48:23,324 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2021-07-29 17:48:24,765 - octoprint.plugins.BuildBee - WARNING - Alt baud enabled 2021-07-29 17:48:24,768 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:48:25,925 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:48:25,927 - octoprint.plugins.BuildBee - INFO - Connecting to printer on device /dev/ttyACM0 2021-07-29 17:48:25,984 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Opening serial connection" 2021-07-29 17:48:25,994 - octoprint.util.comm - INFO - Connecting to port /dev/ttyACM0, baudrate 115200 2021-07-29 17:48:26,007 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial connection" to "Connecting" 2021-07-29 17:48:26,016 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2021-07-29 17:48:26,930 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2021-07-29 17:48:27,426 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2021-07-29 17:48:27,429 - octoprint.util.comm - INFO - Changing monitoring state from "Connecting" to "Operational" 2021-07-29 17:48:27,470 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2021-07-29 17:48:27,492 - octoprint.util.comm - INFO - Printer reports firmware name "INTAMSYS HT1.5_200905_C" 2021-07-29 17:48:57,470 - octoprint_firmware_check.checks - INFO - Deactivated octoprint_firmware_check.checks due to timeout after 30.0s 2021-07-29 17:48:57,474 - octoprint_firmware_check.checks - INFO - Deactivated octoprint_firmware_check.checks due to timeout after 30.0s 2021-07-29 17:49:40,596 - octoprint.plugins.BuildBee - INFO - Could not find Wifi network. Attempting Ethernet 2021-07-29 17:49:40,822 - octoprint.plugins.BuildBee - INFO - PROXY DICT: {} 2021-07-29 17:49:40,828 - octoprint.plugins.BuildBee - INFO - Searching for an interface to preferentially route requests proxy session traffic though... 2021-07-29 17:49:40,829 - octoprint.plugins.BuildBee - INFO - Candidate interfaces {'eth0': {'ipv4': ['192.168.1.226'], 'ipv6': ['fe80::1437:617c:787c:6328']}, 'lo': {'ipv4': ['127.0.0.1'], 'ipv6': ['::1']}, 'wlan0': {'ipv4': [], 'ipv6': ['fe80::7a94:d1f4:8a2:192b']}} 2021-07-29 17:49:40,855 - octoprint.plugins.BuildBee - INFO - Candidate interface names dict_keys(['eth0', 'lo', 'wlan0']) 2021-07-29 17:49:40,857 - octoprint.plugins.BuildBee - INFO - Interfaces with IPs ['eth0', 'lo'] 2021-07-29 17:49:40,859 - octoprint.plugins.BuildBee - INFO - Interfaces with valid names ['eth0'] 2021-07-29 17:49:40,865 - octoprint.plugins.BuildBee - INFO - Interfaces with valid IPs ['eth0'] 2021-07-29 17:49:40,869 - octoprint.plugins.BuildBee - INFO - Attempting to bind proxy session traffic to eth0 2021-07-29 17:49:45,823 - octoprint.plugins.BuildBee - INFO - Successfully found WiFi network. Given address: ['192.168.1.83'] 2021-07-29 17:49:46,896 - octoprint.plugins.BuildBee - INFO - PROXY DICT: {} 2021-07-29 17:49:46,897 - octoprint.plugins.BuildBee - INFO - Searching for an interface to preferentially route requests proxy session traffic though... 2021-07-29 17:49:46,899 - octoprint.plugins.BuildBee - INFO - Candidate interfaces {'eth0': {'ipv4': ['192.168.1.226'], 'ipv6': ['fe80::1437:617c:787c:6328']}, 'lo': {'ipv4': ['127.0.0.1'], 'ipv6': ['::1']}, 'wlan0': {'ipv4': ['192.168.1.83'], 'ipv6': ['fe80::7a94:d1f4:8a2:192b']}} 2021-07-29 17:49:46,900 - octoprint.plugins.BuildBee - INFO - Candidate interface names dict_keys(['eth0', 'lo', 'wlan0']) 2021-07-29 17:49:46,901 - octoprint.plugins.BuildBee - INFO - Interfaces with IPs ['eth0', 'lo', 'wlan0'] 2021-07-29 17:49:46,903 - octoprint.plugins.BuildBee - INFO - Interfaces with valid names ['eth0', 'wlan0'] 2021-07-29 17:49:46,904 - octoprint.plugins.BuildBee - INFO - Interfaces with valid IPs ['eth0', 'wlan0'] 2021-07-29 17:49:46,905 - octoprint.plugins.BuildBee - INFO - Attempting to bind proxy session traffic to eth0 2021-07-29 17:50:19,205 - octoprint.printer.standard.job - INFO - Print job selected - origin: sdcard, path: M28072~1.GCO, owner: None, user: None 2021-07-29 17:50:19,431 - octoprint.printer.standard.job - INFO - Print job selected - origin: sdcard, path: M28072~1.GCO, owner: None, user: None 2021-07-29 17:50:19,544 - octoprint.printer.standard.job - INFO - Print job selected - origin: sdcard, path: M28072~1.GCO, owner: None, user: None 2021-07-29 17:51:59,751 - octoprint.util.comm - ERROR - Unexpected error while reading from serial port Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3860, in _readline ret = self._serial.readline() File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 6488, in readline c = self.read(1) File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 596, in read 'device reports readiness to read but returned no data ' serial.serialutil.SerialException: device reports readiness to read but returned no data (device disconnected or multiple access on port?) 2021-07-29 17:51:59,776 - octoprint.util.comm - ERROR - Unexpected error while writing to serial port Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 621, in write n = os.write(self.fd, d) OSError: [Errno 5] Input/output error During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 4715, in _do_send_without_checksum result = self._serial.write(to_send) File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 655, in write raise SerialException('write failed: {}'.format(e)) serial.serialutil.SerialException: write failed: [Errno 5] Input/output error 2021-07-29 17:51:59,799 - octoprint.util.comm - ERROR - Please see https://faq.octoprint.org/serialerror for possible reasons of this. 2021-07-29 17:51:59,802 - octoprint.util.comm - INFO - Please see https://faq.octoprint.org/serialerror for possible reasons of this. 2021-07-29 17:51:59,806 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Offline after error" 2021-07-29 17:51:59,816 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2021-07-29 17:52:02,030 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:52:03,761 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:52:05,478 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:52:07,331 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:52:09,069 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:52:10,798 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:52:12,831 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:52:13,985 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:52:15,143 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:52:16,567 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:52:18,384 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:52:20,123 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:52:21,823 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:52:24,909 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:52:26,634 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:52:28,292 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:52:30,009 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:52:31,728 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:52:33,437 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:52:35,486 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:52:36,652 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:52:37,963 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:52:39,225 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:52:40,851 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:52:42,565 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:52:43,314 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2021-07-29 17:52:43,349 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 0 port/baudrate candidates: 2021-07-29 17:52:43,352 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Error" 2021-07-29 17:52:43,358 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2021-07-29 17:52:43,387 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2021-07-29 17:52:44,618 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:52:46,519 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:52:47,671 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:52:48,949 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:52:50,635 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:52:52,355 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:52:54,252 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:52:55,987 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:52:57,996 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:52:59,151 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:53:00,318 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:53:01,719 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:53:03,422 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:53:05,172 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:53:06,891 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:53:08,874 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:53:10,028 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:53:11,255 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:53:12,891 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:53:14,741 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:53:16,452 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:53:18,170 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:53:20,203 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:53:21,355 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:53:22,506 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:53:23,944 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:53:25,621 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:53:27,361 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:53:29,085 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:53:31,028 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:53:32,180 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:53:33,334 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:53:34,962 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:53:36,684 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:53:38,407 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:53:40,116 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:53:42,113 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:53:43,265 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:53:44,419 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:53:46,029 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:53:47,771 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:53:49,492 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:53:51,361 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:53:53,391 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:53:54,546 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:53:55,698 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:53:57,113 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:53:58,491 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:53:59,649 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:54:00,800 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:54:02,140 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:54:04,671 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:54:06,492 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:54:08,116 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:54:09,824 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:54:11,680 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:54:13,271 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:54:15,990 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:54:17,702 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:54:19,442 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:54:21,155 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:54:22,828 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:54:24,521 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:54:27,552 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:54:29,035 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:54:30,213 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:54:31,375 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:54:32,724 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:54:34,227 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:54:35,952 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:54:38,036 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:54:39,203 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:54:40,395 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:54:41,909 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:54:43,592 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:54:45,283 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:54:46,965 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:54:48,911 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:54:50,087 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:54:51,262 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:54:52,655 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:54:54,041 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:54:55,217 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:54:56,373 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:54:57,758 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:54:59,844 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:55:01,007 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:55:02,163 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:55:03,743 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:55:05,415 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:55:07,086 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:55:08,829 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:55:10,703 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:55:11,880 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:55:13,347 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:55:15,061 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:55:16,776 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:55:18,462 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:55:20,151 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:55:22,072 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:55:23,228 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:55:24,417 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:55:25,845 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:55:27,546 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:55:29,233 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:55:30,929 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:55:31,864 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2021-07-29 17:55:32,875 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:55:34,034 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:55:35,201 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:55:36,762 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:55:38,489 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:55:39,978 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:55:41,164 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:55:42,337 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:55:43,353 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:55:44,525 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:55:45,893 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:55:47,602 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:55:49,292 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:55:51,015 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:55:52,683 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:55:54,605 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:55:55,772 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:55:56,945 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:55:58,362 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:56:00,031 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:56:01,719 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:56:03,478 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:56:05,425 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:56:06,601 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:56:07,816 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:56:09,423 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:56:11,276 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:56:12,955 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:56:14,773 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:56:16,724 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:56:17,878 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:56:19,031 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:56:20,428 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:56:22,141 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:56:23,443 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:56:24,606 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:56:25,763 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:56:26,779 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:56:28,297 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:56:30,036 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:56:31,558 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:56:32,721 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:56:33,905 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:56:34,128 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2021-07-29 17:56:34,185 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 0 port/baudrate candidates: 2021-07-29 17:56:34,186 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Error" 2021-07-29 17:56:34,188 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2021-07-29 17:56:34,204 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2021-07-29 17:56:35,424 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:56:37,136 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:56:37,549 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2021-07-29 17:56:37,611 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 0 port/baudrate candidates: 2021-07-29 17:56:37,614 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Error" 2021-07-29 17:56:37,617 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2021-07-29 17:56:37,634 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2021-07-29 17:56:39,169 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:56:40,340 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:56:41,513 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:56:42,936 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:56:44,431 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:56:45,619 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:56:46,792 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:56:48,062 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:56:50,605 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:56:52,274 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:56:53,604 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:56:54,781 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:56:55,955 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:56:57,257 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:56:58,913 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:57:01,297 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:57:03,004 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:57:04,877 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:57:06,440 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:57:08,129 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:57:09,814 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:57:11,733 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:57:12,906 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:57:14,137 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:57:15,773 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:57:17,400 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:57:19,072 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:57:20,694 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:57:22,776 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:57:23,933 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200 2021-07-29 17:57:25,204 - octoprint.plugins.BuildBee - INFO - Using alternate baud of 115200