2019-12-14 20:44:30,618 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2019-12-14 20:44:30,673 - octoprint.util.connectivity_checker - INFO - Connectivity changed from offline to online 2019-12-14 20:44:30,688 - octoprint.server - INFO - --- Log roll over detected --------------------------------------------------- 2019-12-14 20:44:30,689 - octoprint.server - INFO - OctoPrint 1.4.0rc2 2019-12-14 20:44:30,703 - octoprint.plugin.core - INFO - 39 plugin(s) registered with the system: | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/appkeys | Autoscroll (0.0.2) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_autoscroll | Backup & Restore (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/backup | Bed Visualizer (0.1.11) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_bedlevelvisualizer | BetterHeaterTimeout (1.2.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_BetterHeaterTimeout | Cancel Objects (0.3.3) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_cancelobject | Change Filament Plugin (0.3.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_Change_Filament | CommandSplitter (0.1.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_commandsplitter | Consolidate Temp Control (0.1.3) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_consolidate_temp_control | Core Wizard (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/corewizard | Cost Estimation (2.1.3) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_costestimation | Custom Control Editor (0.2.1) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_customControl | Discovery (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/discovery | DisplayLayerProgress Plugin (1.14.2) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_DisplayLayerProgress | Error Tracking (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/errortracking | Filament Manager (0.5.3) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_filamentmanager | Firmware Updater (1.6.1) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_firmwareupdater | Floating Navbar (0.3.1) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_floatingnavbar | Logging (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/logging | M73-Progress-Plugin (0.1.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_m73progress | Octolapse (0.4.0rc1.dev2) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_octolapse | Pi Support Plugin (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/pluginmanager | PortLister (0.1.8) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_portlister | Preheat Button (0.4.1) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_preheat | Print Track (1.0.2) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_printtrack | Printer Safety Check (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/printer_safety_check | Printer Stats (2.0.2) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_stats | PrintTimeGenius Plugin (2.1) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_PrintTimeGenius | Resource Monitor (0.1.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_resource_monitor | Shutdown Printer (1.0.8) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_shutdownprinter | Software Update (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/softwareupdate | Tasmota (0.8.8) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_tasmota | The Spaghetti Detective (1.0.4) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_thespaghettidetective | Themeify (1.2.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_themeify | Virtual Printer (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2019-12-14 20:44:30,738 - octoprint.environment - INFO - Detected environment is Python 2.7.13 under Linux (linux2). Details: | hardware: | cores: 4 | freq: 1400.0 | ram: 906604544 | os: | id: linux | platform: linux2 | plugins: | pi_support: | model: Raspberry Pi 3 Model B Plus Rev 1.3 | octopi_version: 0.16.0 | python: | pip: 19.0.1 | version: 2.7.13 | virtualenv: /home/pi/oprint 2019-12-14 20:44:30,739 - octoprint.server - INFO - ------------------------------------------------------------------------------ 2019-12-14 20:44:32,865 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from https://plugins.octoprint.org/plugins.json 2019-12-14 20:44:32,940 - octoprint.plugins.announcements - INFO - Loaded channel _blog from https://octoprint.org/feeds/octoblog.xml in 2.2s 2019-12-14 20:44:33,225 - octoprint.plugins.announcements - INFO - Loaded channel _important from https://octoprint.org/feeds/important.xml in 1.6s 2019-12-14 20:44:33,283 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python2 -m pip" as command to invoke pip 2019-12-14 20:44:33,329 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python2.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2019-12-14 20:44:33,330 - octoprint.util.pip - INFO - ==> pip ok -> yes 2019-12-14 20:44:33,646 - octoprint.plugins.pluginmanager - INFO - Loaded plugin notices data from https://plugins.octoprint.org/notices.json 2019-12-14 20:44:35,659 - octoprint.plugins.announcements - INFO - Loaded channel _plugins from https://plugins.octoprint.org/feed.xml in 2.0s 2019-12-14 20:44:36,776 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python2 -m pip" as command to invoke pip 2019-12-14 20:44:36,821 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python2 -m pip" as command to invoke pip 2019-12-14 20:44:36,891 - octoprint.plugins.announcements - INFO - Loaded channel _releases from https://octoprint.org/feeds/releases.xml in 2.3s 2019-12-14 20:44:36,963 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python2 -m pip" as command to invoke pip 2019-12-14 20:44:37,218 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python2 -m pip" as command to invoke pip 2019-12-14 20:44:37,327 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python2 -m pip" as command to invoke pip 2019-12-14 20:44:37,495 - octoprint.plugins.announcements - INFO - Loaded channel _octopi from https://octoprint.org/feeds/octopi.xml in 1.2s 2019-12-14 20:44:37,516 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2019-12-14 20:44:44,937 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python2.7/site-packages/ (writable -> yes), --user flag needed -> no, virtual env -> yes 2019-12-14 20:44:44,938 - octoprint.util.pip - INFO - ==> pip ok -> yes 2019-12-14 20:44:47,551 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk 2019-12-14 20:44:47,568 - octoprint.plugins.bedlevelvisualizer - INFO - OctoPrint-BedLevelVisualizer loaded! 2019-12-14 20:44:47,593 - octoprint.plugins.portlister - INFO - Port Lister () {} 2019-12-14 20:44:47,601 - octoprint.plugins.stats - INFO - Printer Stats 2019-12-14 20:44:47,605 - octoprint.plugins.tasmota - INFO - Tasmota loaded! 2019-12-14 20:44:47,606 - octoprint.plugins.themeify - INFO - Themeify initialized. 2019-12-14 20:44:48,642 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'query_string': 'l10n=en', 'path': '/', 'base_url': 'http://192.168.1.130/'} 2019-12-14 20:44:50,883 - octoprint.plugins.thespaghettidetective - INFO - User account: {u'is_pro': False} 2019-12-14 20:44:51,385 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 38} 2019-12-14 20:44:52,365 - octoprint.plugins.tracking - INFO - Sent tracking event startup, payload: {'python': '2.7.13', 'ram': 906604544, u'octopi_version': u'0.16.0', 'version': u'1.4.0rc2', 'pip': '19.0.1', 'cores': 4, 'freq': 1400.0, u'pi_model': u'Raspberry Pi 3 Model B Plus Rev 1.3', 'os': 'linux'} 2019-12-14 20:44:53,528 - octoprint.plugins.tracking - INFO - Sent tracking event pong, payload: {'plugins': u'displaylayerprogress:1.14.2,commandsplitter:0.1.0,firmwareupdater:1.6.1,tasmota:0.8.8,betterheatertimeout:1.2.0,stats:2.0.2,cancelobject:0.3.3,customcontrol:0.2.1,resource_monitor:0.1.0,m73progress:0.1.0,costestimation:2.1.3,themeify:1.2.0,autoscroll:0.0.2,consolidate_temp_control:0.1.3,shutdownprinter:1.0.8,portlister:0.1.8,bedlevelvisualizer:0.1.11,printtrack:1.0.2,thespaghettidetective:1.0.4,filamentmanager:0.5.3,change_filament:0.3.0,octolapse:0.4.0rc1.dev2,floatingnavbar:0.3.1,printtimegenius:2.1,preheat:0.4.1'} 2019-12-14 20:45:10,487 - octoprint.server.preemptive_cache - INFO - ... done in 21.85s 2019-12-14 20:45:10,489 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'query_string': 'l10n=en', 'path': '/', 'base_url': 'https://6627eff4.ngrok.io/'} 2019-12-14 20:45:17,450 - octoprint.server.preemptive_cache - INFO - ... done in 6.96s 2019-12-14 20:49:23,575 - octoprint.server.util.sockjs - INFO - New connection from client: 192.168.1.121 2019-12-14 20:49:24,018 - octoprint.server.util.flask - INFO - Passively logging in user NovaViper from 192.168.1.121 2019-12-14 20:49:32,987 - octoprint.server.util.sockjs - INFO - User NovaViper logged in on the socket from client 192.168.1.121 2019-12-14 20:49:38,348 - octoprint.plugins.softwareupdate - INFO - Starting update of octoprint to 1.4.0rc3... 2019-12-14 20:50:02,594 - octoprint.plugins.softwareupdate - INFO - Update of octoprint to 1.4.0rc3 successful! 2019-12-14 20:50:03,174 - octoprint.plugins.softwareupdate - INFO - Starting update of TheSpaghettiDetective to 1.0.5... 2019-12-14 20:50:03,490 - octoprint.plugins.tracking - INFO - Sent tracking event update_successful, payload: {'to_version': u'1.4.0rc3', 'from_version': u'1.4.0rc2', 'target': u'octoprint'} 2019-12-14 20:50:42,484 - octoprint.plugins.softwareupdate - INFO - Update of TheSpaghettiDetective to 1.0.5 successful! 2019-12-14 20:50:43,344 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk 2019-12-14 20:50:43,348 - octoprint.plugins.softwareupdate - INFO - Restarting... 2019-12-14 20:50:43,473 - octoprint.plugins.tracking - INFO - Sent tracking event update_successful, payload: {'to_version': u'1.0.5', 'from_version': '1.0.4', 'target': u'TheSpaghettiDetective'} 2019-12-14 20:51:18,478 - octoprint.startup - INFO - ****************************************************************************** 2019-12-14 20:51:18,480 - octoprint.startup - INFO - Starting OctoPrint 1.4.0rc3 2019-12-14 20:51:18,481 - octoprint.startup - INFO - ****************************************************************************** 2019-12-14 20:51:18,561 - octoprint.util.connectivity_checker - INFO - Connectivity changed from offline to online 2019-12-14 20:51:19,404 - octoprint.startup - INFO - Blacklist processing done, adding 1 blacklisted plugin versions: roomtemp (any) 2019-12-14 20:51:19,449 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2019-12-14 20:51:21,348 - py.warnings - WARNING - /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_preheat/__init__.py:4: ExtDeprecationWarning: Importing flask.ext.login is deprecated, use flask_login instead. from flask.ext.login import current_user 2019-12-14 20:51:23,931 - octoprint.plugins.errortracking - INFO - Initialized error tracking 2019-12-14 20:51:23,942 - octoprint.startup - INFO - Added settings overlay from plugin consolidate_temp_control 2019-12-14 20:51:23,950 - octoprint.plugin.core - INFO - Found 39 plugin(s) providing 38 mixin implementations, 76 hook handlers 2019-12-14 20:51:24,728 - octoprint.server.heartbeat - INFO - Starting server heartbeat, 900.0s interval 2019-12-14 20:51:24,758 - octoprint.server - INFO - Intermediary server started 2019-12-14 20:51:24,760 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2019-12-14 20:51:25,710 - octoprint.plugin.core - INFO - Found 39 plugin(s) providing 38 mixin implementations, 76 hook handlers 2019-12-14 20:51:25,749 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/pi/.octoprint/uploads... 2019-12-14 20:51:26,435 - octoprint.filemanager.storage - INFO - ... file metadata for /home/pi/.octoprint/uploads initialized successfully. 2019-12-14 20:51:26,441 - octoprint.server - INFO - Added new permission from plugin action_command_prompt: PLUGIN_ACTION_COMMAND_PROMPT_INTERACT (needs: u"Need(method='role', value=u'plugin_action_command_prompt_interact')") 2019-12-14 20:51:26,443 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_READ (needs: u"Need(method='role', value=u'plugin_announcements_read')") 2019-12-14 20:51:26,444 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_MANAGE (needs: u"Need(method='role', value=u'plugin_announcements_manage'), Need(method='role', value=u'plugin_announcements_read')") 2019-12-14 20:51:26,445 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_ADMIN (needs: u"Need(method='role', value=u'plugin_appkeys_admin')") 2019-12-14 20:51:26,446 - octoprint.server - INFO - Added new permission from plugin backup: PLUGIN_BACKUP_ACCESS (needs: u"Need(method='role', value=u'plugin_backup_access')") 2019-12-14 20:51:26,448 - octoprint.server - INFO - Added new permission from plugin logging: PLUGIN_LOGGING_MANAGE (needs: u"Need(method='role', value=u'plugin_logging_manage')") 2019-12-14 20:51:26,450 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_MANAGE (needs: u"Need(method='role', value=u'plugin_pluginmanager_manage')") 2019-12-14 20:51:26,454 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_INSTALL (needs: u"Need(method='role', value=u'plugin_pluginmanager_install'), Need(method='role', value=u'plugin_pluginmanager_manage')") 2019-12-14 20:51:26,457 - octoprint.server - INFO - Added new permission from plugin printer_safety_check: PLUGIN_PRINTER_SAFETY_CHECK_DISPLAY (needs: u"Need(method='role', value=u'plugin_printer_safety_check_display')") 2019-12-14 20:51:26,458 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CHECK (needs: u"Need(method='role', value=u'plugin_softwareupdate_check')") 2019-12-14 20:51:26,459 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_UPDATE (needs: u"Need(method='role', value=u'plugin_softwareupdate_update')") 2019-12-14 20:51:26,487 - octoprint.printer.standard - INFO - Using print time estimator provided by PrintTimeGenius 2019-12-14 20:51:26,519 - octoprint.plugins.cancelobject - INFO - No aftergcode defined 2019-12-14 20:51:27,003 - octoprint.plugins.softwareupdate - INFO - Version cache was created for another version of OctoPrint, not using it 2019-12-14 20:51:28,821 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python2 -m pip" as command to invoke pip 2019-12-14 20:51:30,514 - octoprint.util.pip - INFO - Version of pip is 19.0.1 2019-12-14 20:51:30,516 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python2.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2019-12-14 20:51:30,517 - octoprint.util.pip - INFO - ==> pip ok -> yes 2019-12-14 20:51:30,525 - octoprint.plugin.core - INFO - Initialized 38 plugin implementation(s) 2019-12-14 20:51:30,586 - octoprint.plugin.core - INFO - 39 plugin(s) registered with the system: | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/appkeys | Autoscroll (0.0.2) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_autoscroll | Backup & Restore (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/backup | Bed Visualizer (0.1.11) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_bedlevelvisualizer | BetterHeaterTimeout (1.2.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_BetterHeaterTimeout | Cancel Objects (0.3.3) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_cancelobject | Change Filament Plugin (0.3.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_Change_Filament | CommandSplitter (0.1.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_commandsplitter | Consolidate Temp Control (0.1.3) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_consolidate_temp_control | Core Wizard (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/corewizard | Cost Estimation (2.1.3) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_costestimation | Custom Control Editor (0.2.1) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_customControl | Discovery (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/discovery | DisplayLayerProgress Plugin (1.14.2) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_DisplayLayerProgress | Error Tracking (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/errortracking | Filament Manager (0.5.3) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_filamentmanager | Firmware Updater (1.6.1) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_firmwareupdater | Floating Navbar (0.3.1) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_floatingnavbar | Logging (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/logging | M73-Progress-Plugin (0.1.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_m73progress | Octolapse (0.4.0rc1.dev2) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_octolapse | Pi Support Plugin (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/pluginmanager | PortLister (0.1.8) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_portlister | Preheat Button (0.4.1) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_preheat | Print Track (1.0.2) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_printtrack | Printer Safety Check (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/printer_safety_check | Printer Stats (2.0.2) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_stats | PrintTimeGenius Plugin (2.1) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_PrintTimeGenius | Resource Monitor (0.1.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_resource_monitor | Shutdown Printer (1.0.8) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_shutdownprinter | Software Update (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/softwareupdate | Tasmota (0.8.8) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_tasmota | The Spaghetti Detective (1.0.5) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_thespaghettidetective | Themeify (1.2.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_themeify | Virtual Printer (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2019-12-14 20:51:30,606 - octoprint.environment - INFO - Detected environment is Python 2.7.13 under Linux (linux2). Details: | hardware: | cores: 4 | freq: 1400.0 | ram: 906604544 | os: | id: linux | platform: linux2 | plugins: | pi_support: | model: Raspberry Pi 3 Model B Plus Rev 1.3 | octopi_version: 0.16.0 | python: | pip: 19.0.1 | version: 2.7.13 | virtualenv: /home/pi/oprint 2019-12-14 20:51:30,623 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/webassets... 2019-12-14 20:51:30,654 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-cache... 2019-12-14 20:51:32,793 - octoprint.server - INFO - Shutting down intermediary server... 2019-12-14 20:51:32,798 - octoprint.server - INFO - Intermediary server shut down 2019-12-14 20:51:32,802 - octoprint.events - INFO - Processing startup event, this is our first event 2019-12-14 20:51:32,803 - octoprint.events - INFO - Adding 1 events to queue that were held back before startup event 2019-12-14 20:51:32,823 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue... 2019-12-14 20:51:32,830 - octoprint.server - INFO - Autoconnect on startup is configured, trying to connect to the printer... 2019-12-14 20:51:32,904 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2019-12-14 20:51:33,952 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue 2019-12-14 20:51:34,357 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2019-12-14 20:51:34,598 - octoprint.server - INFO - Trying to connect to configured serial port None 2019-12-14 20:51:34,692 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial port" 2019-12-14 20:51:34,712 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder... 2019-12-14 20:51:34,718 - octoprint.server.util.watchdog - INFO - ... initial scan done. 2019-12-14 20:51:34,730 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial port" to "Error: Failed to autodetect serial port, please set it manually." 2019-12-14 20:51:34,768 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-14 20:51:36,570 - octoprint.plugins.tracking - INFO - Sent tracking event commerror_autodetect_port, payload: {'commerror_text': u'Failed to autodetect serial port, please set it manually.'} 2019-12-14 20:51:37,875 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python2 -m pip" as command to invoke pip 2019-12-14 20:51:37,975 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python2 -m pip" as command to invoke pip 2019-12-14 20:51:38,004 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python2 -m pip" as command to invoke pip 2019-12-14 20:51:38,303 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python2 -m pip" as command to invoke pip 2019-12-14 20:51:38,356 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on octopi' for _http._tcp 2019-12-14 20:51:38,374 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on octopi' for _octoprint._tcp 2019-12-14 20:51:38,395 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance on octopi for SSDP 2019-12-14 20:51:38,579 - octoprint.server - INFO - Listening on http://127.0.0.1:5000 2019-12-14 20:51:38,584 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python2 -m pip" as command to invoke pip 2019-12-14 20:51:38,755 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2019-12-14 20:51:41,021 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2019-12-14 20:51:41,076 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python2 -m pip" as command to invoke pip 2019-12-14 20:51:43,772 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python2.7/site-packages/ (writable -> yes), --user flag needed -> no, virtual env -> yes 2019-12-14 20:51:43,773 - octoprint.util.pip - INFO - ==> pip ok -> yes 2019-12-14 20:51:43,810 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python2.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2019-12-14 20:51:43,816 - octoprint.util.pip - INFO - ==> pip ok -> yes 2019-12-14 20:51:47,758 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk 2019-12-14 20:51:47,779 - octoprint.plugins.bedlevelvisualizer - INFO - OctoPrint-BedLevelVisualizer loaded! 2019-12-14 20:51:47,808 - octoprint.plugins.portlister - INFO - Port Lister () {} 2019-12-14 20:51:47,824 - octoprint.plugins.stats - INFO - Printer Stats 2019-12-14 20:51:47,830 - octoprint.plugins.tasmota - INFO - Tasmota loaded! 2019-12-14 20:51:47,834 - octoprint.plugins.themeify - INFO - Themeify initialized. 2019-12-14 20:51:48,684 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 27} 2019-12-14 20:51:49,107 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'query_string': 'l10n=en', 'path': '/', 'base_url': 'http://192.168.1.130/'} 2019-12-14 20:51:49,472 - octoprint.plugins.tracking - INFO - Sent tracking event startup, payload: {'python': '2.7.13', 'ram': 906604544, u'octopi_version': u'0.16.0', 'version': u'1.4.0rc3', 'pip': '19.0.1', 'cores': 4, 'freq': 1400.0, u'pi_model': u'Raspberry Pi 3 Model B Plus Rev 1.3', 'os': 'linux'} 2019-12-14 20:51:49,585 - octoprint.plugins.thespaghettidetective - INFO - User account: {u'is_pro': False} 2019-12-14 20:51:50,576 - octoprint.plugins.tracking - INFO - Sent tracking event pong, payload: {'plugins': u'displaylayerprogress:1.14.2,commandsplitter:0.1.0,firmwareupdater:1.6.1,tasmota:0.8.8,betterheatertimeout:1.2.0,stats:2.0.2,cancelobject:0.3.3,customcontrol:0.2.1,resource_monitor:0.1.0,m73progress:0.1.0,costestimation:2.1.3,themeify:1.2.0,autoscroll:0.0.2,consolidate_temp_control:0.1.3,shutdownprinter:1.0.8,portlister:0.1.8,bedlevelvisualizer:0.1.11,printtrack:1.0.2,thespaghettidetective:1.0.5,filamentmanager:0.5.3,change_filament:0.3.0,octolapse:0.4.0rc1.dev2,floatingnavbar:0.3.1,printtimegenius:2.1,preheat:0.4.1'} 2019-12-14 20:52:17,619 - octoprint.server.preemptive_cache - INFO - ... done in 28.51s 2019-12-14 20:52:17,620 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'query_string': 'l10n=en', 'path': '/', 'base_url': 'https://6627eff4.ngrok.io/'} 2019-12-14 20:52:25,058 - octoprint.server.util.sockjs - INFO - New connection from client: 192.168.1.121 2019-12-14 20:52:25,817 - octoprint.server.util.flask - INFO - Passively logging in user NovaViper from 192.168.1.121 2019-12-14 20:52:26,020 - octoprint.server.preemptive_cache - INFO - ... done in 8.40s 2019-12-14 20:52:31,251 - octoprint.server.util.sockjs - INFO - User NovaViper logged in on the socket from client 192.168.1.121 2019-12-14 20:53:14,335 - octoprint.plugins.portlister - INFO - on_port_created connection_options {u'portPreference': None, u'autoconnect': True, u'baudrates': [250000, 230400, 115200, 57600, 38400, 19200, 9600], u'ports': [u'/dev/ttyACM0'], u'baudratePreference': 250000} 2019-12-14 20:53:14,336 - octoprint.plugins.portlister - INFO - Checking if /dev/ttyACM0 is in [u'/dev/ttyACM0'] 2019-12-14 20:53:14,343 - octoprint.plugins.portlister - INFO - autoconnect_delay 20 2019-12-14 20:53:15,303 - octoprint.plugins.portlister - INFO - on_port_created connection_options {u'portPreference': None, u'autoconnect': True, u'baudrates': [250000, 230400, 115200, 57600, 38400, 19200, 9600], u'ports': [u'/dev/ttyACM0'], u'baudratePreference': 250000} 2019-12-14 20:53:15,305 - octoprint.plugins.portlister - INFO - Checking if /dev/sda is in [u'/dev/ttyACM0'] 2019-12-14 20:53:15,307 - octoprint.plugins.portlister - WARNING - Won't autoconnect because /dev/sda isn't in [u'/dev/ttyACM0'] 2019-12-14 20:53:15,328 - octoprint.plugins.portlister - INFO - on_port_created connection_options {u'portPreference': None, u'autoconnect': True, u'baudrates': [250000, 230400, 115200, 57600, 38400, 19200, 9600], u'ports': [u'/dev/ttyACM0'], u'baudratePreference': 250000} 2019-12-14 20:53:15,329 - octoprint.plugins.portlister - INFO - Checking if /dev/sg0 is in [u'/dev/ttyACM0'] 2019-12-14 20:53:15,331 - octoprint.plugins.portlister - WARNING - Won't autoconnect because /dev/sg0 isn't in [u'/dev/ttyACM0'] 2019-12-14 20:53:26,286 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial port" 2019-12-14 20:53:26,348 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial port" to "Opening serial port" 2019-12-14 20:53:26,353 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial port" to "Connecting" 2019-12-14 20:53:26,378 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2019-12-14 20:53:27,419 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2019-12-14 20:53:27,492 - octoprint.util.comm - INFO - Changing monitoring state from "Connecting" to "Operational" 2019-12-14 20:53:27,546 - octoprint.plugins.firmwareupdater - INFO - Got CONNECTED event 2019-12-14 20:53:27,551 - octoprint.plugins.firmwareupdater - INFO - Run postflash flag is not set 2019-12-14 20:53:27,552 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-14 20:53:27,564 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2019-12-14 20:53:27,578 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin 2.0.x (GitHub)" 2019-12-14 20:53:27,759 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting 2019-12-14 20:53:27,844 - octoprint.util.comm - INFO - Firmware states that it supports emergency GCODEs to be sent without waiting for an acknowledgement first 2019-12-14 20:53:28,784 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {u'printer_baudrate': 250000, u'printer_port': None, 'firmware_name': u'Marlin 2.0.x (GitHub)'} 2019-12-14 20:53:34,350 - octoprint.plugins.portlister - INFO - do_auto_connect 2019-12-14 20:53:34,352 - octoprint.plugins.portlister - INFO - realpath match 2019-12-14 20:53:34,393 - octoprint.plugins.portlister - INFO - Not autoconnecting; printer already connected 2019-12-14 20:56:22,252 - octoprint.util.comm - INFO - Printer seems to support the busy protocol, will adjust timeouts and set busy interval accordingly 2019-12-14 21:04:42,776 - octoprint.util.comm - INFO - Telling the printer to set the busy interval to our "communicationBusy" timeout - 1s = 2s 2019-12-14 21:06:24,730 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2019-12-14 21:06:48,497 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 927} 2019-12-14 21:15:12,694 - tornado.access - WARNING - 400 POST /api/files/sdcard (192.168.1.121) 250.70ms 2019-12-14 21:19:11,539 - octoprint.filemanager.analysis - INFO - Starting analysis of local:Christmas/Emma_For_Lithograp_PLA0.32mm_0.4n_Ender3_2h0m.gcode 2019-12-14 21:19:11,575 - octoprint.printer.standard.job - INFO - Print job selected - origin: local, path: Christmas/Emma_For_Lithograp_PLA0.32mm_0.4n_Ender3_2h0m.gcode, owner: _api, user: _api 2019-12-14 21:19:11,581 - octoprint.plugins.DisplayLayerProgress - INFO - File selected. Determining number of layers. 2019-12-14 21:19:11,600 - octoprint.plugin - ERROR - Error while calling plugin DisplayLayerProgress Traceback (most recent call last): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/plugin/__init__.py", line 224, in call_plugin result = getattr(plugin, method)(*args, **kwargs) File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_DisplayLayerProgress/__init__.py", line 344, in on_event with open(selectedFile, "r") as f: IOError: [Errno 2] No such file or directory: '' 2019-12-14 21:19:11,710 - octoprint.plugin - ERROR - Error while calling plugin cancelobject Traceback (most recent call last): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/plugin/__init__.py", line 224, in call_plugin result = getattr(plugin, method)(*args, **kwargs) File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_cancelobject/__init__.py", line 250, in on_event with open(selectedFile, "r") as f: IOError: [Errno 2] No such file or directory: '' 2019-12-14 21:19:11,790 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting" 2019-12-14 21:19:11,847 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: Christmas/Emma_For_Lithograp_PLA0.32mm_0.4n_Ender3_2h0m.gcode, owner: _api, user: _api 2019-12-14 21:19:11,932 - octoprint.plugins.DisplayLayerProgress - INFO - Printing started. Detailed progress started.{'origin': u'local', 'name': u'Emma_For_Lithograp_PLA0.32mm_0.4n_Ender3_2h0m.gcode', u'user': u'_api', u'owner': u'_api', 'path': u'Christmas/Emma_For_Lithograp_PLA0.32mm_0.4n_Ender3_2h0m.gcode', 'size': 5768700L} 2019-12-14 21:19:11,952 - octoprint.plugin - ERROR - Error while calling plugin cancelobject Traceback (most recent call last): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/plugin/__init__.py", line 224, in call_plugin result = getattr(plugin, method)(*args, **kwargs) File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_cancelobject/__init__.py", line 250, in on_event with open(selectedFile, "r") as f: IOError: [Errno 2] No such file or directory: '' 2019-12-14 21:19:12,123 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Printing" 2019-12-14 21:19:12,142 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-14 21:19:12,150 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2019-12-14 21:19:12,809 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-14 21:19:12,924 - octoprint.plugins.tracking - INFO - Sent tracking event print_started, payload: {'origin': u'local', 'file': '916a48274eb3dd1e09e4bc9edfbaa19bef711cfe'} 2019-12-14 21:19:22,202 - octoprint.filemanager.analysis - INFO - Analysis of entry local:Christmas/Emma_For_Lithograp_PLA0.32mm_0.4n_Ender3_2h0m.gcode finished, needed 10.66s 2019-12-14 21:21:24,732 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2019-12-14 21:21:42,653 - octoprint.plugins.cancelobject - INFO - Tracking Extrusion 2019-12-14 21:21:42,857 - octoprint.plugins.cancelobject - INFO - Not Tracking Extrusion 2019-12-14 21:21:48,516 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 1827} 2019-12-14 21:21:57,580 - octoprint.plugins.cancelobject - INFO - Tracking Extrusion 2019-12-14 21:21:57,786 - octoprint.plugins.cancelobject - INFO - Not Tracking Extrusion 2019-12-14 21:22:23,653 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Pausing" 2019-12-14 21:22:23,661 - octoprint.plugins.filamentmanager - INFO - Filament used: 58.97109 mm (tool0) 2019-12-14 21:22:24,570 - octoprint.printer.standard.job - INFO - Print job paused - origin: local, path: Christmas/Emma_For_Lithograp_PLA0.32mm_0.4n_Ender3_2h0m.gcode, owner: _api, user: NovaViper 2019-12-14 21:22:24,577 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-14 21:22:24,830 - octoprint.plugins.cancelobject - INFO - Not Tracking Extrusion 2019-12-14 21:22:24,871 - octoprint.plugins.cancelobject - INFO - Tracking Extrusion 2019-12-14 21:22:24,999 - octoprint.util.comm - INFO - Changing monitoring state from "Pausing" to "Paused" 2019-12-14 21:23:01,058 - octoprint.util.comm - INFO - Changing monitoring state from "Paused" to "Resuming" 2019-12-14 21:23:01,081 - octoprint.printer.standard.job - INFO - Print job resumed - origin: local, path: Christmas/Emma_For_Lithograp_PLA0.32mm_0.4n_Ender3_2h0m.gcode, owner: _api, user: NovaViper 2019-12-14 21:23:01,091 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-14 21:23:01,199 - octoprint.plugins.cancelobject - INFO - Not Tracking Extrusion 2019-12-14 21:23:01,376 - octoprint.plugins.cancelobject - INFO - Tracking Extrusion 2019-12-14 21:23:01,417 - octoprint.plugins.cancelobject - INFO - Not Tracking Extrusion 2019-12-14 21:23:01,520 - octoprint.util.comm - INFO - Changing monitoring state from "Resuming" to "Printing" 2019-12-14 21:23:22,629 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Pausing" 2019-12-14 21:23:22,652 - octoprint.plugins.filamentmanager - INFO - Filament used: 2.0 mm (tool0) 2019-12-14 21:23:23,724 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-14 21:23:23,728 - octoprint.printer.standard.job - INFO - Print job paused - origin: local, path: Christmas/Emma_For_Lithograp_PLA0.32mm_0.4n_Ender3_2h0m.gcode, owner: _api, user: NovaViper 2019-12-14 21:23:23,782 - octoprint.plugins.cancelobject - INFO - Not Tracking Extrusion 2019-12-14 21:23:23,934 - octoprint.plugins.cancelobject - INFO - Tracking Extrusion 2019-12-14 21:23:24,057 - octoprint.util.comm - INFO - Changing monitoring state from "Pausing" to "Paused" 2019-12-14 21:23:57,800 - octoprint.util.comm - INFO - Changing monitoring state from "Paused" to "Resuming" 2019-12-14 21:23:57,816 - octoprint.printer.standard.job - INFO - Print job resumed - origin: local, path: Christmas/Emma_For_Lithograp_PLA0.32mm_0.4n_Ender3_2h0m.gcode, owner: _api, user: NovaViper 2019-12-14 21:23:57,825 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-14 21:23:57,831 - octoprint.plugins.cancelobject - INFO - Not Tracking Extrusion 2019-12-14 21:23:58,100 - octoprint.plugins.cancelobject - INFO - Tracking Extrusion 2019-12-14 21:23:58,161 - octoprint.plugins.cancelobject - INFO - Not Tracking Extrusion 2019-12-14 21:23:58,293 - octoprint.util.comm - INFO - Changing monitoring state from "Resuming" to "Printing" 2019-12-14 21:30:37,409 - octoprint.server.util.sockjs - INFO - Client connection closed: 192.168.1.121 2019-12-14 21:33:38,083 - octoprint.server.util.flask.PreemptiveCache - INFO - Adding entry for / and {'query_string': u'l10n=en', 'path': u'/', u'_count': 1, u'_timestamp': 1576359218.083257, 'base_url': u'http://1bcc8f82.ngrok.io/'} 2019-12-14 21:34:20,216 - octoprint.server.util.sockjs - INFO - New connection from client: 166.137.136.64 2019-12-14 21:34:38,808 - tornado.access - WARNING - 403 POST /api/plugin/tasmota (166.137.136.64) 299.04ms 2019-12-14 21:36:24,735 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2019-12-14 21:36:33,492 - octoprint.server.api - INFO - Actively logging in user NovaViper from 166.137.136.64 2019-12-14 21:36:37,002 - octoprint.server.util.sockjs - INFO - User NovaViper logged in on the socket from client 166.137.136.64 2019-12-14 21:36:50,788 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 2727} 2019-12-14 21:43:21,655 - octoprint.server.util.sockjs - INFO - Client connection closed: 166.137.136.64 2019-12-14 21:46:37,738 - octoprint.server.util.sockjs - INFO - New connection from client: 166.137.136.64 2019-12-14 21:46:38,548 - octoprint.server.util.flask - INFO - Passively logging in user NovaViper from 166.137.136.64 2019-12-14 21:47:01,266 - octoprint.server.util.sockjs - INFO - User NovaViper logged in on the socket from client 166.137.136.64 2019-12-14 21:50:51,731 - octoprint.server.util.sockjs - INFO - Client connection closed: 166.137.136.64 2019-12-14 21:51:24,736 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2019-12-14 21:51:48,538 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 3627} 2019-12-14 21:52:57,428 - octoprint.server.util.sockjs - INFO - New connection from client: 166.137.136.64 2019-12-14 21:52:58,153 - octoprint.server.util.flask - INFO - Passively logging in user NovaViper from 166.137.136.64 2019-12-14 21:53:24,629 - octoprint.server.util.sockjs - INFO - User NovaViper logged in on the socket from client 166.137.136.64 2019-12-14 21:54:00,270 - octoprint.server.util.sockjs - INFO - Client connection closed: 166.137.136.64 2019-12-14 21:56:49,149 - octoprint.server.util.sockjs - INFO - New connection from client: 166.137.136.64 2019-12-14 21:56:49,900 - octoprint.server.util.sockjs - INFO - User NovaViper logged in on the socket from client 166.137.136.64 2019-12-14 21:56:50,079 - octoprint.server.util.sockjs - INFO - User NovaViper logged in on the socket from client 166.137.136.64 2019-12-14 21:56:54,609 - octoprint.server.util.sockjs - INFO - Client connection closed: 166.137.136.64 2019-12-14 21:59:11,320 - octoprint.server.util.sockjs - INFO - New connection from client: 166.137.136.64 2019-12-14 21:59:12,420 - octoprint.server.util.sockjs - INFO - User NovaViper logged in on the socket from client 166.137.136.64 2019-12-14 21:59:28,192 - tornado.access - WARNING - 404 GET //webcam/?action=stream (166.137.136.64) 9.78ms 2019-12-14 21:59:32,739 - octoprint.server.util.sockjs - INFO - Client connection closed: 166.137.136.64 2019-12-14 22:06:24,739 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2019-12-14 22:06:49,538 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 4527} 2019-12-14 22:11:36,526 - octoprint.server.util.sockjs - INFO - New connection from client: 166.137.136.64 2019-12-14 22:11:37,179 - octoprint.server.util.sockjs - INFO - User NovaViper logged in on the socket from client 166.137.136.64 2019-12-14 22:11:45,134 - tornado.access - WARNING - 404 GET //webcam/?action=stream (166.137.136.64) 9.95ms 2019-12-14 22:11:49,316 - tornado.access - WARNING - 404 GET //webcam/?action=stream (166.137.136.64) 23.62ms 2019-12-14 22:11:53,924 - octoprint.server.util.sockjs - INFO - Client connection closed: 166.137.136.64 2019-12-14 22:11:59,186 - octoprint.server.util.sockjs - INFO - New connection from client: 166.137.136.64 2019-12-14 22:11:59,775 - octoprint.server.util.sockjs - INFO - User NovaViper logged in on the socket from client 166.137.136.64 2019-12-14 22:12:05,091 - octoprint.server.util.sockjs - INFO - Client connection closed: 166.137.136.64 2019-12-14 22:12:20,909 - octoprint.server.util.sockjs - INFO - New connection from client: 166.137.136.64 2019-12-14 22:12:21,786 - octoprint.server.util.sockjs - INFO - User NovaViper logged in on the socket from client 166.137.136.64 2019-12-14 22:12:57,428 - octoprint.server.util.sockjs - INFO - Client connection closed: 166.137.136.64 2019-12-14 22:21:24,746 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2019-12-14 22:21:48,655 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 5427} 2019-12-14 22:23:54,070 - octoprint.server.util.sockjs - INFO - New connection from client: 166.137.136.64 2019-12-14 22:23:54,731 - octoprint.server.util.sockjs - INFO - User NovaViper logged in on the socket from client 166.137.136.64 2019-12-14 22:24:04,843 - octoprint.server.util.sockjs - INFO - Client connection closed: 166.137.136.64 2019-12-14 22:27:03,411 - octoprint.server.util.sockjs - INFO - New connection from client: 166.137.136.64 2019-12-14 22:27:04,432 - octoprint.server.util.sockjs - INFO - User NovaViper logged in on the socket from client 166.137.136.64 2019-12-14 22:27:53,023 - octoprint.server.util.sockjs - INFO - Client connection closed: 166.137.136.64 2019-12-14 22:28:59,263 - octoprint.server.util.sockjs - INFO - New connection from client: 166.137.136.64 2019-12-14 22:28:59,944 - octoprint.server.util.sockjs - INFO - User NovaViper logged in on the socket from client 166.137.136.64 2019-12-14 22:29:30,084 - octoprint.server.util.sockjs - INFO - Client connection closed: 166.137.136.64 2019-12-14 22:36:24,749 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2019-12-14 22:36:48,551 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 6327} 2019-12-14 22:38:22,996 - octoprint.server.util.sockjs - INFO - New connection from client: 166.137.136.64 2019-12-14 22:38:23,621 - octoprint.server.util.sockjs - INFO - User NovaViper logged in on the socket from client 166.137.136.64 2019-12-14 22:38:52,648 - octoprint.server.util.sockjs - INFO - Client connection closed: 166.137.136.64 2019-12-14 22:39:06,343 - octoprint.server.util.sockjs - INFO - New connection from client: 166.137.136.64 2019-12-14 22:39:06,953 - octoprint.server.util.sockjs - INFO - User NovaViper logged in on the socket from client 166.137.136.64 2019-12-14 22:39:20,174 - octoprint.server.util.sockjs - INFO - Client connection closed: 166.137.136.64 2019-12-14 22:50:51,269 - octoprint.server.util.sockjs - INFO - New connection from client: 192.168.1.121 2019-12-14 22:50:54,613 - octoprint.server.util.flask - INFO - Passively logging in user NovaViper from 192.168.1.121 2019-12-14 22:50:54,768 - octoprint.server.util.sockjs - INFO - User NovaViper logged in on the socket from client 192.168.1.121 2019-12-14 22:51:24,752 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2019-12-14 22:51:24,989 - octoprint.server.util.sockjs - INFO - Client connection closed: 192.168.1.121 2019-12-14 22:51:26,432 - octoprint.server.util.sockjs - INFO - New connection from client: 192.168.1.121 2019-12-14 22:51:26,984 - octoprint.server.util.flask - INFO - Passively logging in user NovaViper from 192.168.1.121 2019-12-14 22:51:48,559 - octoprint.server.util.sockjs - INFO - User NovaViper logged in on the socket from client 192.168.1.121 2019-12-14 22:51:49,143 - octoprint.server.util.sockjs - INFO - Client connection closed: 192.168.1.121 2019-12-14 22:51:49,187 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 7227} 2019-12-14 22:51:49,650 - octoprint.server.util.sockjs - INFO - New connection from client: 192.168.1.121 2019-12-14 22:51:50,055 - octoprint.server.util.flask - INFO - Passively logging in user NovaViper from 192.168.1.121 2019-12-14 22:51:54,285 - octoprint.server.util.sockjs - INFO - User NovaViper logged in on the socket from client 192.168.1.121 2019-12-14 23:06:24,761 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2019-12-14 23:06:49,906 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 8127} 2019-12-14 23:15:37,090 - octoprint.server.util.sockjs - INFO - Client connection closed: 192.168.1.121 2019-12-14 23:17:40,015 - octoprint.server.util.sockjs - INFO - New connection from client: 192.168.1.121 2019-12-14 23:17:43,281 - octoprint.server.util.flask - INFO - Passively logging in user NovaViper from 192.168.1.121 2019-12-14 23:17:43,509 - octoprint.server.util.sockjs - INFO - User NovaViper logged in on the socket from client 192.168.1.121 2019-12-14 23:20:26,055 - octoprint.plugins.cancelobject - INFO - Could not get entry ENDGCODE 2019-12-14 23:20:35,931 - octoprint.util.comm - INFO - Finished in 7284.147 s. 2019-12-14 23:20:35,937 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Finishing" 2019-12-14 23:20:35,962 - octoprint.plugins.filamentmanager - INFO - Filament used: 2.0 mm (tool0) 2019-12-14 23:20:35,975 - octoprint.printer.standard.job - INFO - Print job done - origin: local, path: Christmas/Emma_For_Lithograp_PLA0.32mm_0.4n_Ender3_2h0m.gcode, owner: _api 2019-12-14 23:20:36,033 - octoprint.util.comm - INFO - Changing monitoring state from "Finishing" to "Operational" 2019-12-14 23:20:36,136 - octoprint.plugins.DisplayLayerProgress - INFO - Printing stopped. Detailed progress stopped. 2019-12-14 23:20:36,437 - octoprint.plugins.shutdownprinter - INFO - Starting abort shutdown printer timer. 2019-12-14 23:20:36,450 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-14 23:20:37,029 - octoprint.plugins.tracking - INFO - Sent tracking event print_done, payload: {'origin': u'local', 'file': '916a48274eb3dd1e09e4bc9edfbaa19bef711cfe', u'elapsed': 7211} 2019-12-14 23:21:06,672 - octoprint.plugins.shutdownprinter - INFO - Shutting down printer with command: M81 2019-12-14 23:21:24,775 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2019-12-14 23:21:48,783 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 9027} 2019-12-14 23:36:24,825 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2019-12-14 23:36:48,721 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 9927} 2019-12-14 23:51:24,826 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2019-12-14 23:51:48,748 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 10827} 2019-12-14 23:58:31,895 - octoprint.plugins.cancelobject - INFO - Not Tracking Extrusion 2019-12-15 00:06:24,829 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2019-12-15 00:06:48,928 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 11727} 2019-12-15 00:21:24,832 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2019-12-15 00:21:48,771 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 12627} 2019-12-15 00:35:26,686 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Offline" 2019-12-15 00:35:26,721 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 00:36:24,834 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2019-12-15 00:36:48,710 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 13527} 2019-12-15 00:45:30,886 - octoprint.plugins.thespaghettidetective - ERROR - Server websocket is closing 2019-12-15 00:48:47,127 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 00:51:24,837 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2019-12-15 00:51:48,713 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 14427} 2019-12-15 01:06:24,839 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2019-12-15 01:06:48,731 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 15327} 2019-12-15 01:21:24,841 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2019-12-15 01:21:48,702 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 16227} 2019-12-15 01:36:24,843 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2019-12-15 01:36:48,721 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 17127} 2019-12-15 01:24:11,301 - octoprint.startup - INFO - ****************************************************************************** 2019-12-15 01:24:11,305 - octoprint.startup - INFO - Starting OctoPrint 1.4.0rc3 2019-12-15 01:24:11,305 - octoprint.startup - INFO - ****************************************************************************** 2019-12-15 01:24:11,467 - octoprint.startup - INFO - We don't appear to be online, not fetching plugin blacklist 2019-12-15 01:24:11,556 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2019-12-15 01:24:14,243 - py.warnings - WARNING - /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_preheat/__init__.py:4: ExtDeprecationWarning: Importing flask.ext.login is deprecated, use flask_login instead. from flask.ext.login import current_user 2019-12-15 01:24:19,035 - octoprint.plugins.errortracking - INFO - Initialized error tracking 2019-12-15 01:24:19,048 - octoprint.startup - INFO - Added settings overlay from plugin consolidate_temp_control 2019-12-15 01:24:19,056 - octoprint.plugin.core - INFO - Found 39 plugin(s) providing 38 mixin implementations, 76 hook handlers 2019-12-15 01:24:19,939 - octoprint.server.heartbeat - INFO - Starting server heartbeat, 900.0s interval 2019-12-15 01:24:20,014 - octoprint.server - INFO - Intermediary server started 2019-12-15 01:24:20,016 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2019-12-15 01:24:21,148 - octoprint.plugin.core - INFO - Found 39 plugin(s) providing 38 mixin implementations, 76 hook handlers 2019-12-15 01:24:21,192 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/pi/.octoprint/uploads... 2019-12-15 01:24:21,924 - octoprint.filemanager.storage - INFO - ... file metadata for /home/pi/.octoprint/uploads initialized successfully. 2019-12-15 01:24:21,930 - octoprint.server - INFO - Added new permission from plugin action_command_prompt: PLUGIN_ACTION_COMMAND_PROMPT_INTERACT (needs: u"Need(method='role', value=u'plugin_action_command_prompt_interact')") 2019-12-15 01:24:21,932 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_READ (needs: u"Need(method='role', value=u'plugin_announcements_read')") 2019-12-15 01:24:21,934 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_MANAGE (needs: u"Need(method='role', value=u'plugin_announcements_manage'), Need(method='role', value=u'plugin_announcements_read')") 2019-12-15 01:24:21,936 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_ADMIN (needs: u"Need(method='role', value=u'plugin_appkeys_admin')") 2019-12-15 01:24:21,938 - octoprint.server - INFO - Added new permission from plugin backup: PLUGIN_BACKUP_ACCESS (needs: u"Need(method='role', value=u'plugin_backup_access')") 2019-12-15 01:24:21,941 - octoprint.server - INFO - Added new permission from plugin logging: PLUGIN_LOGGING_MANAGE (needs: u"Need(method='role', value=u'plugin_logging_manage')") 2019-12-15 01:24:21,943 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_MANAGE (needs: u"Need(method='role', value=u'plugin_pluginmanager_manage')") 2019-12-15 01:24:21,945 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_INSTALL (needs: u"Need(method='role', value=u'plugin_pluginmanager_install'), Need(method='role', value=u'plugin_pluginmanager_manage')") 2019-12-15 01:24:21,947 - octoprint.server - INFO - Added new permission from plugin printer_safety_check: PLUGIN_PRINTER_SAFETY_CHECK_DISPLAY (needs: u"Need(method='role', value=u'plugin_printer_safety_check_display')") 2019-12-15 01:24:21,949 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CHECK (needs: u"Need(method='role', value=u'plugin_softwareupdate_check')") 2019-12-15 01:24:21,951 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_UPDATE (needs: u"Need(method='role', value=u'plugin_softwareupdate_update')") 2019-12-15 01:24:21,977 - octoprint.printer.standard - INFO - Using print time estimator provided by PrintTimeGenius 2019-12-15 01:24:22,012 - octoprint.plugins.cancelobject - INFO - No aftergcode defined 2019-12-15 01:24:22,506 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk 2019-12-15 01:24:24,906 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python2 -m pip" as command to invoke pip 2019-12-15 01:24:26,676 - octoprint.util.pip - INFO - Version of pip is 19.0.1 2019-12-15 01:24:26,678 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python2.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2019-12-15 01:24:26,683 - octoprint.util.pip - INFO - ==> pip ok -> yes 2019-12-15 01:24:26,697 - octoprint.plugin.core - INFO - Initialized 38 plugin implementation(s) 2019-12-15 01:24:26,780 - octoprint.plugin.core - INFO - 39 plugin(s) registered with the system: | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/appkeys | Autoscroll (0.0.2) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_autoscroll | Backup & Restore (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/backup | Bed Visualizer (0.1.11) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_bedlevelvisualizer | BetterHeaterTimeout (1.2.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_BetterHeaterTimeout | Cancel Objects (0.3.3) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_cancelobject | Change Filament Plugin (0.3.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_Change_Filament | CommandSplitter (0.1.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_commandsplitter | Consolidate Temp Control (0.1.3) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_consolidate_temp_control | Core Wizard (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/corewizard | Cost Estimation (2.1.3) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_costestimation | Custom Control Editor (0.2.1) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_customControl | Discovery (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/discovery | DisplayLayerProgress Plugin (1.14.2) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_DisplayLayerProgress | Error Tracking (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/errortracking | Filament Manager (0.5.3) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_filamentmanager | Firmware Updater (1.6.1) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_firmwareupdater | Floating Navbar (0.3.1) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_floatingnavbar | Logging (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/logging | M73-Progress-Plugin (0.1.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_m73progress | Octolapse (0.4.0rc1.dev2) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_octolapse | Pi Support Plugin (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/pluginmanager | PortLister (0.1.8) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_portlister | Preheat Button (0.4.1) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_preheat | Print Track (1.0.2) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_printtrack | Printer Safety Check (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/printer_safety_check | Printer Stats (2.0.2) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_stats | PrintTimeGenius Plugin (2.1) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_PrintTimeGenius | Resource Monitor (0.1.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_resource_monitor | Shutdown Printer (1.0.8) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_shutdownprinter | Software Update (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/softwareupdate | Tasmota (0.8.8) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_tasmota | The Spaghetti Detective (1.0.5) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_thespaghettidetective | Themeify (1.2.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_themeify | Virtual Printer (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2019-12-15 01:24:26,807 - octoprint.environment - INFO - Detected environment is Python 2.7.13 under Linux (linux2). Details: | hardware: | cores: 4 | freq: 1400.0 | ram: 906604544 | os: | id: linux | platform: linux2 | plugins: | pi_support: | model: Raspberry Pi 3 Model B Plus Rev 1.3 | octopi_version: 0.16.0 | python: | pip: 19.0.1 | version: 2.7.13 | virtualenv: /home/pi/oprint 2019-12-15 01:24:26,826 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/webassets... 2019-12-15 01:24:26,858 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-cache... 2019-12-15 01:24:29,113 - octoprint.server - INFO - Shutting down intermediary server... 2019-12-15 01:24:29,582 - octoprint.server - INFO - Intermediary server shut down 2019-12-15 01:24:29,591 - octoprint.events - INFO - Processing startup event, this is our first event 2019-12-15 01:24:29,602 - octoprint.events - INFO - Adding 0 events to queue that were held back before startup event 2019-12-15 01:24:29,610 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue... 2019-12-15 01:24:29,613 - octoprint.server - INFO - Autoconnect on startup is configured, trying to connect to the printer... 2019-12-15 01:24:29,682 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue 2019-12-15 01:24:29,696 - octoprint.server - INFO - Trying to connect to configured serial port None 2019-12-15 01:24:29,803 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial port" 2019-12-15 01:24:29,821 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder... 2019-12-15 01:24:29,828 - octoprint.server.util.watchdog - INFO - ... initial scan done. 2019-12-15 01:24:29,854 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial port" to "Error: Failed to autodetect serial port, please set it manually." 2019-12-15 01:24:29,929 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 01:24:30,876 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on octopi' for _http._tcp 2019-12-15 01:24:30,892 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on octopi' for _octoprint._tcp 2019-12-15 01:24:30,910 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance on octopi for SSDP 2019-12-15 01:24:31,038 - octoprint.server - INFO - Listening on http://127.0.0.1:5000 2019-12-15 01:24:31,149 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2019-12-15 01:24:32,629 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2019-12-15 01:24:33,279 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python2 -m pip" as command to invoke pip 2019-12-15 01:24:33,281 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python2.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2019-12-15 01:24:33,282 - octoprint.util.pip - INFO - ==> pip ok -> yes 2019-12-15 01:24:33,328 - octoprint.util.connectivity_checker - INFO - Connectivity changed from offline to online 2019-12-15 01:24:33,361 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2019-12-15 01:24:35,009 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2019-12-15 01:24:35,020 - octoprint.plugins.bedlevelvisualizer - INFO - OctoPrint-BedLevelVisualizer loaded! 2019-12-15 01:24:35,052 - octoprint.plugins.portlister - INFO - Port Lister () {} 2019-12-15 01:24:35,057 - octoprint.plugins.stats - INFO - Printer Stats 2019-12-15 01:24:35,062 - octoprint.plugins.tasmota - INFO - Tasmota loaded! 2019-12-15 01:24:35,064 - octoprint.plugins.themeify - INFO - Themeify initialized. 2019-12-15 03:18:05,877 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2019-12-15 03:18:06,273 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 22} 2019-12-15 03:18:06,517 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'query_string': 'l10n=en', 'path': '/', 'base_url': 'http://192.168.1.130/'} 2019-12-15 03:18:06,886 - octoprint.plugins.thespaghettidetective - INFO - User account: {u'is_pro': False} 2019-12-15 03:18:07,053 - octoprint.plugins.tracking - INFO - Sent tracking event startup, payload: {'python': '2.7.13', 'ram': 906604544, u'octopi_version': u'0.16.0', 'version': u'1.4.0rc3', 'pip': '19.0.1', 'cores': 4, 'freq': 1400.0, u'pi_model': u'Raspberry Pi 3 Model B Plus Rev 1.3', 'os': 'linux'} 2019-12-15 03:18:08,110 - octoprint.plugins.tracking - INFO - Sent tracking event pong, payload: {'plugins': u'displaylayerprogress:1.14.2,commandsplitter:0.1.0,firmwareupdater:1.6.1,tasmota:0.8.8,betterheatertimeout:1.2.0,stats:2.0.2,cancelobject:0.3.3,customcontrol:0.2.1,resource_monitor:0.1.0,m73progress:0.1.0,costestimation:2.1.3,themeify:1.2.0,autoscroll:0.0.2,consolidate_temp_control:0.1.3,shutdownprinter:1.0.8,portlister:0.1.8,bedlevelvisualizer:0.1.11,printtrack:1.0.2,thespaghettidetective:1.0.5,filamentmanager:0.5.3,change_filament:0.3.0,octolapse:0.4.0rc1.dev2,floatingnavbar:0.3.1,printtimegenius:2.1,preheat:0.4.1'} 2019-12-15 03:18:09,066 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 22} 2019-12-15 03:18:28,463 - octoprint.server.preemptive_cache - INFO - ... done in 21.95s 2019-12-15 03:18:28,466 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'query_string': 'l10n=en', 'path': '/', 'base_url': 'http://1bcc8f82.ngrok.io/'} 2019-12-15 03:18:35,295 - octoprint.server.preemptive_cache - INFO - ... done in 6.83s 2019-12-15 03:18:35,297 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'query_string': 'l10n=en', 'path': '/', 'base_url': 'https://6627eff4.ngrok.io/'} 2019-12-15 03:18:42,670 - octoprint.server.preemptive_cache - INFO - ... done in 7.37s 2019-12-15 03:20:12,007 - octoprint.plugins.portlister - INFO - on_port_created connection_options {u'portPreference': None, u'autoconnect': True, u'baudrates': [250000, 230400, 115200, 57600, 38400, 19200, 9600], u'ports': [u'/dev/ttyACM0'], u'baudratePreference': 250000} 2019-12-15 03:20:12,009 - octoprint.plugins.portlister - INFO - Checking if /dev/ttyACM0 is in [u'/dev/ttyACM0'] 2019-12-15 03:20:12,012 - octoprint.plugins.portlister - INFO - autoconnect_delay 20 2019-12-15 03:20:13,017 - octoprint.plugins.portlister - INFO - on_port_created connection_options {u'portPreference': None, u'autoconnect': True, u'baudrates': [250000, 230400, 115200, 57600, 38400, 19200, 9600], u'ports': [u'/dev/ttyACM0'], u'baudratePreference': 250000} 2019-12-15 03:20:13,020 - octoprint.plugins.portlister - INFO - Checking if /dev/sda is in [u'/dev/ttyACM0'] 2019-12-15 03:20:13,021 - octoprint.plugins.portlister - WARNING - Won't autoconnect because /dev/sda isn't in [u'/dev/ttyACM0'] 2019-12-15 03:20:13,043 - octoprint.plugins.portlister - INFO - on_port_created connection_options {u'portPreference': None, u'autoconnect': True, u'baudrates': [250000, 230400, 115200, 57600, 38400, 19200, 9600], u'ports': [u'/dev/ttyACM0'], u'baudratePreference': 250000} 2019-12-15 03:20:13,044 - octoprint.plugins.portlister - INFO - Checking if /dev/sg0 is in [u'/dev/ttyACM0'] 2019-12-15 03:20:13,047 - octoprint.plugins.portlister - WARNING - Won't autoconnect because /dev/sg0 isn't in [u'/dev/ttyACM0'] 2019-12-15 03:20:32,019 - octoprint.plugins.portlister - INFO - do_auto_connect 2019-12-15 03:20:32,021 - octoprint.plugins.portlister - INFO - realpath match 2019-12-15 03:20:32,060 - octoprint.plugins.portlister - INFO - Attempting to connect to AUTO at 250000 with profile '_default' 2019-12-15 03:20:32,143 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial port" 2019-12-15 03:20:32,176 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial port" to "Opening serial port" 2019-12-15 03:20:32,181 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial port" to "Connecting" 2019-12-15 03:20:32,197 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2019-12-15 03:20:32,208 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2019-12-15 03:20:32,216 - octoprint.util.comm - INFO - Changing monitoring state from "Connecting" to "Operational" 2019-12-15 03:20:32,229 - octoprint.plugins.firmwareupdater - INFO - Got CONNECTED event 2019-12-15 03:20:32,231 - octoprint.plugins.firmwareupdater - INFO - Run postflash flag is not set 2019-12-15 03:20:32,235 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 03:20:32,245 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2019-12-15 03:20:32,261 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin 2.0.x (GitHub)" 2019-12-15 03:20:32,353 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting 2019-12-15 03:20:32,497 - octoprint.util.comm - INFO - Firmware states that it supports emergency GCODEs to be sent without waiting for an acknowledgement first 2019-12-15 03:20:33,272 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {u'printer_baudrate': 250000, u'printer_port': 'AUTO', 'firmware_name': u'Marlin 2.0.x (GitHub)'} 2019-12-15 03:22:30,387 - octoprint.server.util.sockjs - INFO - New connection from client: 192.168.1.121 2019-12-15 03:22:30,865 - octoprint.server.util.flask - INFO - Passively logging in user NovaViper from 192.168.1.121 2019-12-15 03:22:35,682 - octoprint.plugins.announcements - INFO - Loaded channel _important from https://octoprint.org/feeds/important.xml in 1.0s 2019-12-15 03:22:36,778 - octoprint.plugins.announcements - INFO - Loaded channel _releases from https://octoprint.org/feeds/releases.xml in 0.8s 2019-12-15 03:22:38,392 - octoprint.plugins.announcements - INFO - Loaded channel _blog from https://octoprint.org/feeds/octoblog.xml in 0.75s 2019-12-15 03:22:39,354 - octoprint.plugins.announcements - INFO - Loaded channel _plugins from https://plugins.octoprint.org/feed.xml in 0.89s 2019-12-15 03:22:41,126 - octoprint.plugins.announcements - INFO - Loaded channel _octopi from https://octoprint.org/feeds/octopi.xml in 1.7s 2019-12-15 03:22:42,408 - octoprint.plugins.pluginmanager - INFO - Loaded plugin notices data from https://plugins.octoprint.org/notices.json 2019-12-15 03:22:44,026 - octoprint.server.util.sockjs - INFO - User NovaViper logged in on the socket from client 192.168.1.121 2019-12-15 03:23:05,679 - octoprint.server.api.system - INFO - Performing command for custom:restart stream 2019-12-15 03:33:05,880 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2019-12-15 03:33:06,696 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 922} 2019-12-15 03:39:25,792 - octoprint.util.comm - INFO - Printer seems to support the busy protocol, will adjust timeouts and set busy interval accordingly 2019-12-15 03:39:26,668 - octoprint.util.comm - INFO - Telling the printer to set the busy interval to our "communicationBusy" timeout - 1s = 2s 2019-12-15 03:48:05,881 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2019-12-15 03:48:06,688 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 1822} 2019-12-15 04:03:05,883 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2019-12-15 04:03:06,783 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 2722} 2019-12-15 04:18:05,885 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2019-12-15 04:18:06,778 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 3622} 2019-12-15 04:29:51,477 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Offline" 2019-12-15 04:29:51,533 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 04:29:51,611 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial port" 2019-12-15 04:29:52,061 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial port" to "Opening serial port" 2019-12-15 04:29:52,067 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial port" to "Connecting" 2019-12-15 04:29:52,108 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2019-12-15 04:29:52,126 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2019-12-15 04:29:52,195 - octoprint.util.comm - INFO - Changing monitoring state from "Connecting" to "Operational" 2019-12-15 04:29:52,230 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2019-12-15 04:29:52,294 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin 2.0.x (GitHub)" 2019-12-15 04:29:52,305 - octoprint.plugins.firmwareupdater - INFO - Got CONNECTED event 2019-12-15 04:29:52,321 - octoprint.plugins.firmwareupdater - INFO - Run postflash flag is not set 2019-12-15 04:29:52,396 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 04:29:52,429 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting 2019-12-15 04:29:52,717 - octoprint.util.comm - INFO - Firmware states that it supports emergency GCODEs to be sent without waiting for an acknowledgement first 2019-12-15 04:29:54,056 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {u'printer_baudrate': 250000, u'printer_port': None, 'firmware_name': u'Marlin 2.0.x (GitHub)'} 2019-12-15 04:29:55,924 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Offline" 2019-12-15 04:29:55,958 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 04:29:56,025 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial port" 2019-12-15 04:29:56,322 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial port" to "Opening serial port" 2019-12-15 04:29:56,327 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial port" to "Connecting" 2019-12-15 04:33:05,890 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2019-12-15 04:33:06,684 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 4522} 2019-12-15 04:48:05,892 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2019-12-15 04:48:06,822 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 5422} 2019-12-15 05:03:05,896 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2019-12-15 05:03:06,681 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 6322} 2019-12-15 05:18:05,899 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2019-12-15 05:18:06,694 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 7222} 2019-12-15 05:33:05,941 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2019-12-15 05:33:06,967 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 8122} 2019-12-15 05:47:18,881 - octoprint.server.util.sockjs - INFO - Client connection closed: 192.168.1.121 2019-12-15 05:48:05,981 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2019-12-15 05:48:06,711 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 9022} 2019-12-15 06:03:05,985 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2019-12-15 06:03:06,724 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 9922} 2019-12-15 06:07:04,055 - octoprint.server.util.sockjs - INFO - New connection from client: 192.168.1.121 2019-12-15 06:07:04,441 - octoprint.server.util.flask - INFO - Passively logging in user NovaViper from 192.168.1.121 2019-12-15 06:07:27,370 - octoprint.server.util.sockjs - INFO - User NovaViper logged in on the socket from client 192.168.1.121 2019-12-15 06:07:38,123 - octoprint.plugins.portlister - WARNING - Not auto connecting because printer is not closed nor in error state. 2019-12-15 06:07:39,187 - octoprint.plugins.portlister - WARNING - Not auto connecting because printer is not closed nor in error state. 2019-12-15 06:07:39,189 - octoprint.plugins.portlister - WARNING - Not auto connecting because printer is not closed nor in error state. 2019-12-15 06:07:43,174 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial port" 2019-12-15 06:07:43,231 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial port" to "Opening serial port" 2019-12-15 06:07:43,240 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial port" to "Connecting" 2019-12-15 06:07:43,254 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2019-12-15 06:07:43,266 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2019-12-15 06:07:51,145 - octoprint.util.comm - INFO - Changing monitoring state from "Connecting" to "Operational" 2019-12-15 06:07:51,173 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2019-12-15 06:07:51,197 - octoprint.plugins.firmwareupdater - INFO - Got CONNECTED event 2019-12-15 06:07:51,201 - octoprint.plugins.firmwareupdater - INFO - Run postflash flag is not set 2019-12-15 06:07:51,204 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 06:07:51,390 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin 2.0.x (GitHub)" 2019-12-15 06:07:51,404 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting 2019-12-15 06:07:51,447 - octoprint.util.comm - INFO - Firmware states that it supports emergency GCODEs to be sent without waiting for an acknowledgement first 2019-12-15 06:07:52,273 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {u'printer_baudrate': 250000, u'printer_port': None, 'firmware_name': u'Marlin 2.0.x (GitHub)'} 2019-12-15 06:08:54,730 - octoprint.plugins.firmwareupdater - INFO - Firmware update started 2019-12-15 06:08:54,732 - octoprint.plugins.firmwareupdater - INFO - Disconnecting from printer 2019-12-15 06:08:54,766 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Offline" 2019-12-15 06:08:54,779 - octoprint.plugins.firmwareupdater - INFO - Release the firmware lock on the SD Card by sending 'M22' to '/dev/ttyACM1' 2019-12-15 06:08:54,805 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 06:08:54,891 - octoprint.plugins.firmwareupdater - INFO - Waiting for SD card to be available at '/media/usb' 2019-12-15 06:08:56,184 - octoprint.plugins.portlister - INFO - on_port_created connection_options {u'portPreference': None, u'autoconnect': True, u'baudrates': [250000, 230400, 115200, 57600, 38400, 19200, 9600], u'ports': [u'/dev/ttyACM1'], u'baudratePreference': 250000} 2019-12-15 06:08:56,185 - octoprint.plugins.portlister - INFO - Checking if /dev/sda1 is in [u'/dev/ttyACM1'] 2019-12-15 06:08:56,185 - octoprint.plugins.portlister - WARNING - Won't autoconnect because /dev/sda1 isn't in [u'/dev/ttyACM1'] 2019-12-15 06:09:05,942 - octoprint.plugins.firmwareupdater - INFO - Firmware update folder '/media/usb' available for writing after 11.0 seconds 2019-12-15 06:09:05,944 - octoprint.plugins.firmwareupdater - INFO - Copying firmware to update folder '/tmp/tmpIzLp_d' -> '/media/usb/firmware.bin' 2019-12-15 06:09:07,052 - octoprint.plugins.firmwareupdater - INFO - Unmounting SD card: 'sudo umount /media/usb' 2019-12-15 06:09:07,102 - octoprint.plugins.firmwareupdater - INFO - Firmware update reset: attempting to reset the board 2019-12-15 06:09:07,104 - octoprint.plugins.firmwareupdater - INFO - Resetting LPC1768 at '/dev/ttyACM1' 2019-12-15 06:09:07,160 - octoprint.plugins.firmwareupdater - INFO - Waiting for LPC1768 at '/dev/ttyACM1' to reset 2019-12-15 06:09:08,301 - octoprint.plugins.firmwareupdater - INFO - LPC1768 at '/dev/ttyACM1' is resetting 2019-12-15 06:09:13,987 - octoprint.plugins.portlister - INFO - on_port_created connection_options {u'portPreference': None, u'autoconnect': True, u'baudrates': [250000, 230400, 115200, 57600, 38400, 19200, 9600], u'ports': [u'/dev/ttyACM0'], u'baudratePreference': 250000} 2019-12-15 06:09:13,989 - octoprint.plugins.portlister - INFO - Checking if /dev/video1 is in [u'/dev/ttyACM0'] 2019-12-15 06:09:13,990 - octoprint.plugins.portlister - WARNING - Won't autoconnect because /dev/video1 isn't in [u'/dev/ttyACM0'] 2019-12-15 06:09:14,011 - octoprint.plugins.portlister - INFO - on_port_created connection_options {u'portPreference': None, u'autoconnect': True, u'baudrates': [250000, 230400, 115200, 57600, 38400, 19200, 9600], u'ports': [u'/dev/ttyACM0'], u'baudratePreference': 250000} 2019-12-15 06:09:14,012 - octoprint.plugins.portlister - INFO - Checking if /dev/video2 is in [u'/dev/ttyACM0'] 2019-12-15 06:09:14,012 - octoprint.plugins.portlister - WARNING - Won't autoconnect because /dev/video2 isn't in [u'/dev/ttyACM0'] 2019-12-15 06:09:14,034 - octoprint.plugins.portlister - INFO - on_port_created connection_options {u'portPreference': None, u'autoconnect': True, u'baudrates': [250000, 230400, 115200, 57600, 38400, 19200, 9600], u'ports': [u'/dev/ttyACM0'], u'baudratePreference': 250000} 2019-12-15 06:09:14,036 - octoprint.plugins.portlister - INFO - Checking if /dev/media0 is in [u'/dev/ttyACM0'] 2019-12-15 06:09:14,038 - octoprint.plugins.portlister - WARNING - Won't autoconnect because /dev/media0 isn't in [u'/dev/ttyACM0'] 2019-12-15 06:09:14,463 - octoprint.plugins.portlister - INFO - on_port_created connection_options {u'portPreference': None, u'autoconnect': True, u'baudrates': [250000, 230400, 115200, 57600, 38400, 19200, 9600], u'ports': [u'/dev/ttyACM0'], u'baudratePreference': 250000} 2019-12-15 06:09:14,466 - octoprint.plugins.portlister - INFO - Checking if /dev/ttyACM0 is in [u'/dev/ttyACM0'] 2019-12-15 06:09:14,473 - octoprint.plugins.portlister - INFO - autoconnect_delay 20 2019-12-15 06:09:15,565 - octoprint.plugins.portlister - INFO - on_port_created connection_options {u'portPreference': None, u'autoconnect': True, u'baudrates': [250000, 230400, 115200, 57600, 38400, 19200, 9600], u'ports': [u'/dev/ttyACM0'], u'baudratePreference': 250000} 2019-12-15 06:09:15,571 - octoprint.plugins.portlister - INFO - Checking if /dev/sg0 is in [u'/dev/ttyACM0'] 2019-12-15 06:09:15,575 - octoprint.plugins.portlister - WARNING - Won't autoconnect because /dev/sg0 isn't in [u'/dev/ttyACM0'] 2019-12-15 06:09:15,598 - octoprint.plugins.portlister - INFO - on_port_created connection_options {u'portPreference': None, u'autoconnect': True, u'baudrates': [250000, 230400, 115200, 57600, 38400, 19200, 9600], u'ports': [u'/dev/ttyACM0'], u'baudratePreference': 250000} 2019-12-15 06:09:15,599 - octoprint.plugins.portlister - INFO - Checking if /dev/sda is in [u'/dev/ttyACM0'] 2019-12-15 06:09:15,602 - octoprint.plugins.portlister - WARNING - Won't autoconnect because /dev/sda isn't in [u'/dev/ttyACM0'] 2019-12-15 06:09:31,482 - octoprint.plugins.firmwareupdater - ERROR - Timeout waiting for board reset to complete 2019-12-15 06:09:31,583 - octoprint.plugins.firmwareupdater - ERROR - Board reset failed 2019-12-15 06:09:31,661 - octoprint.plugins.firmwareupdater - ERROR - Reset failed 2019-12-15 06:09:31,739 - octoprint.plugins.firmwareupdater - INFO - Reconnecting to printer: port=/dev/ttyACM1, baudrate=250000, profile={'heatedChamber': False, 'name': 'Nova Ender 3', 'color': 'default', 'axes': {'y': {'speed': 6000, 'inverted': False}, 'x': {'speed': 6000, 'inverted': False}, 'z': {'speed': 200, 'inverted': False}, 'e': {'speed': 300, 'inverted': False}}, 'heatedBed': True, 'volume': {'origin': 'lowerleft', 'formFactor': 'rectangular', 'depth': 226.0, 'width': 233.0, 'custom_box': False, 'height': 250.0}, 'model': 'Creality Ender 3', 'id': '_default', 'extruder': {'count': 1, 'nozzleDiameter': 0.4, 'offsets': [(0.0, 0.0)], 'sharedNozzle': False}} 2019-12-15 06:09:31,847 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Error: Connection error, see Terminal tab" 2019-12-15 06:09:31,852 - octoprint.util.comm - ERROR - Unexpected error while connecting to serial port: /dev/ttyACM1 SerialException: '[Errno 2] could not open port /dev/ttyACM1: [Errno 2] No such file or directory: '/dev/ttyACM1'' @ comm.py:_openSerial:2692 (hook default) Traceback (most recent call last): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/util/comm.py", line 2692, in _openSerial serial_obj = factory(self, self._port, self._baudrate, settings().getFloat(["serial", "timeout", "connection"])) File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/util/comm.py", line 2672, in default serial_obj.open() File "/home/pi/oprint/local/lib/python2.7/site-packages/serial/serialposix.py", line 268, in open raise SerialException(msg.errno, "could not open port {}: {}".format(self._port, msg)) SerialException: [Errno 2] could not open port /dev/ttyACM1: [Errno 2] No such file or directory: '/dev/ttyACM1' 2019-12-15 06:09:31,996 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 06:09:32,818 - octoprint.plugins.tracking - INFO - Sent tracking event commerror_connection, payload: {'commerror_text': u'Connection error, see Terminal tab'} 2019-12-15 06:09:34,480 - octoprint.plugins.portlister - INFO - do_auto_connect 2019-12-15 06:09:34,486 - octoprint.plugins.portlister - INFO - realpath match 2019-12-15 06:09:34,581 - octoprint.plugins.portlister - INFO - Attempting to connect to AUTO at 250000 with profile '_default' 2019-12-15 06:09:34,711 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial port" 2019-12-15 06:09:34,751 - octoprint.plugins.portlister - INFO - on_port_created connection_options {u'portPreference': None, u'autoconnect': True, u'baudrates': [250000, 230400, 115200, 57600, 38400, 19200, 9600], u'ports': [u'/dev/ttyACM0'], u'baudratePreference': 250000} 2019-12-15 06:09:34,752 - octoprint.plugins.portlister - INFO - Checking if /dev/sda1 is in [u'/dev/ttyACM0'] 2019-12-15 06:09:34,754 - octoprint.plugins.portlister - WARNING - Won't autoconnect because /dev/sda1 isn't in [u'/dev/ttyACM0'] 2019-12-15 06:09:34,783 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial port" to "Opening serial port" 2019-12-15 06:09:34,788 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial port" to "Connecting" 2019-12-15 06:09:34,806 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2019-12-15 06:09:36,074 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2019-12-15 06:09:36,094 - octoprint.util.comm - INFO - Changing monitoring state from "Connecting" to "Operational" 2019-12-15 06:09:36,135 - octoprint.plugins.firmwareupdater - INFO - Got CONNECTED event 2019-12-15 06:09:36,139 - octoprint.plugins.firmwareupdater - INFO - Run postflash flag is not set 2019-12-15 06:09:36,144 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 06:09:36,278 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2019-12-15 06:09:36,395 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin 2.0.x (GitHub)" 2019-12-15 06:09:36,409 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting 2019-12-15 06:09:36,436 - octoprint.util.comm - INFO - Firmware states that it supports emergency GCODEs to be sent without waiting for an acknowledgement first 2019-12-15 06:09:37,202 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {u'printer_baudrate': 250000, u'printer_port': 'AUTO', 'firmware_name': u'Marlin 2.0.x (GitHub)'} 2019-12-15 06:10:22,857 - octoprint.plugins.firmwareupdater - INFO - Firmware update started 2019-12-15 06:10:22,867 - octoprint.plugins.firmwareupdater - INFO - Disconnecting from printer 2019-12-15 06:10:22,909 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Offline" 2019-12-15 06:10:22,933 - octoprint.plugins.firmwareupdater - INFO - Release the firmware lock on the SD Card by sending 'M22' to '/dev/ttyACM0' 2019-12-15 06:10:22,939 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 06:10:23,050 - octoprint.plugins.firmwareupdater - INFO - Waiting for SD card to be available at '/media/usb' 2019-12-15 06:10:23,126 - octoprint.plugins.firmwareupdater - INFO - Firmware update folder '/media/usb' available for writing after 0.0 seconds 2019-12-15 06:10:23,127 - octoprint.plugins.firmwareupdater - INFO - Copying firmware to update folder '/tmp/tmpNkQ6rN' -> '/media/usb/firmware.bin' 2019-12-15 06:10:24,039 - octoprint.plugins.firmwareupdater - INFO - Unmounting SD card: 'sudo umount /media/usb' 2019-12-15 06:10:24,122 - octoprint.plugins.firmwareupdater - INFO - Firmware update reset: attempting to reset the board 2019-12-15 06:10:24,125 - octoprint.plugins.firmwareupdater - INFO - Resetting LPC1768 at '/dev/ttyACM0' 2019-12-15 06:10:24,231 - octoprint.plugins.firmwareupdater - INFO - Waiting for LPC1768 at '/dev/ttyACM0' to reset 2019-12-15 06:10:25,598 - octoprint.plugins.firmwareupdater - INFO - LPC1768 at '/dev/ttyACM0' is resetting 2019-12-15 06:10:30,518 - octoprint.plugins.firmwareupdater - INFO - LPC1768 at '/dev/ttyACM0' reset in 6.28 seconds 2019-12-15 06:10:30,521 - octoprint.plugins.firmwareupdater - INFO - Post-flash delay: 30s 2019-12-15 06:10:30,663 - octoprint.plugins.portlister - INFO - on_port_created connection_options {u'portPreference': None, u'autoconnect': True, u'baudrates': [250000, 230400, 115200, 57600, 38400, 19200, 9600], u'ports': [u'/dev/ttyACM0'], u'baudratePreference': 250000} 2019-12-15 06:10:30,665 - octoprint.plugins.portlister - INFO - Checking if /dev/ttyACM0 is in [u'/dev/ttyACM0'] 2019-12-15 06:10:30,669 - octoprint.plugins.portlister - INFO - autoconnect_delay 20 2019-12-15 06:10:31,772 - octoprint.plugins.portlister - INFO - on_port_created connection_options {u'portPreference': None, u'autoconnect': True, u'baudrates': [250000, 230400, 115200, 57600, 38400, 19200, 9600], u'ports': [u'/dev/ttyACM0'], u'baudratePreference': 250000} 2019-12-15 06:10:31,775 - octoprint.plugins.portlister - INFO - Checking if /dev/sg0 is in [u'/dev/ttyACM0'] 2019-12-15 06:10:31,779 - octoprint.plugins.portlister - WARNING - Won't autoconnect because /dev/sg0 isn't in [u'/dev/ttyACM0'] 2019-12-15 06:10:31,816 - octoprint.plugins.portlister - INFO - on_port_created connection_options {u'portPreference': None, u'autoconnect': True, u'baudrates': [250000, 230400, 115200, 57600, 38400, 19200, 9600], u'ports': [u'/dev/ttyACM0'], u'baudratePreference': 250000} 2019-12-15 06:10:31,817 - octoprint.plugins.portlister - INFO - Checking if /dev/sda is in [u'/dev/ttyACM0'] 2019-12-15 06:10:31,818 - octoprint.plugins.portlister - WARNING - Won't autoconnect because /dev/sda isn't in [u'/dev/ttyACM0'] 2019-12-15 06:10:50,675 - octoprint.plugins.portlister - INFO - do_auto_connect 2019-12-15 06:10:50,680 - octoprint.plugins.portlister - INFO - realpath match 2019-12-15 06:10:50,771 - octoprint.plugins.portlister - INFO - Attempting to connect to AUTO at 250000 with profile '_default' 2019-12-15 06:10:50,866 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial port" 2019-12-15 06:10:50,914 - octoprint.plugins.portlister - INFO - on_port_created connection_options {u'portPreference': None, u'autoconnect': True, u'baudrates': [250000, 230400, 115200, 57600, 38400, 19200, 9600], u'ports': [u'/dev/ttyACM0'], u'baudratePreference': 250000} 2019-12-15 06:10:50,918 - octoprint.plugins.portlister - INFO - Checking if /dev/sda1 is in [u'/dev/ttyACM0'] 2019-12-15 06:10:50,924 - octoprint.plugins.portlister - WARNING - Won't autoconnect because /dev/sda1 isn't in [u'/dev/ttyACM0'] 2019-12-15 06:10:50,933 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial port" to "Opening serial port" 2019-12-15 06:10:50,938 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial port" to "Connecting" 2019-12-15 06:10:50,955 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2019-12-15 06:10:52,266 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2019-12-15 06:10:52,295 - octoprint.util.comm - INFO - Changing monitoring state from "Connecting" to "Operational" 2019-12-15 06:10:52,341 - octoprint.plugins.firmwareupdater - INFO - Got CONNECTED event 2019-12-15 06:10:52,357 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2019-12-15 06:10:52,364 - octoprint.plugins.firmwareupdater - INFO - Run postflash flag is not set 2019-12-15 06:10:52,385 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 06:10:52,545 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin 2.0.x (GitHub)" 2019-12-15 06:10:52,652 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting 2019-12-15 06:10:52,676 - octoprint.util.comm - INFO - Firmware states that it supports emergency GCODEs to be sent without waiting for an acknowledgement first 2019-12-15 06:10:53,467 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {u'printer_baudrate': 250000, u'printer_port': 'AUTO', 'firmware_name': u'Marlin 2.0.x (GitHub)'} 2019-12-15 06:11:00,549 - octoprint.plugins.firmwareupdater - INFO - Flashing successful. 2019-12-15 06:11:00,572 - octoprint.plugins.firmwareupdater - INFO - Setting run_postflash_gcode flag to true 2019-12-15 06:11:01,684 - octoprint.plugins.firmwareupdater - INFO - Reconnecting to printer: port=/dev/ttyACM0, baudrate=250000, profile={'heatedChamber': False, 'name': 'Nova Ender 3', 'color': 'default', 'axes': {'y': {'speed': 6000, 'inverted': False}, 'x': {'speed': 6000, 'inverted': False}, 'z': {'speed': 200, 'inverted': False}, 'e': {'speed': 300, 'inverted': False}}, 'heatedBed': True, 'volume': {'origin': 'lowerleft', 'formFactor': 'rectangular', 'depth': 226.0, 'width': 233.0, 'custom_box': False, 'height': 250.0}, 'model': 'Creality Ender 3', 'id': '_default', 'extruder': {'count': 1, 'nozzleDiameter': 0.4, 'offsets': [(0.0, 0.0)], 'sharedNozzle': False}} 2019-12-15 06:11:01,701 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Offline" 2019-12-15 06:11:01,790 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 06:11:02,049 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Error: Connection error, see Terminal tab" 2019-12-15 06:11:02,053 - octoprint.util.comm - ERROR - Unexpected error while connecting to serial port: /dev/ttyACM0 SerialException: '[Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable' @ comm.py:_openSerial:2692 (hook default) Traceback (most recent call last): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/util/comm.py", line 2692, in _openSerial serial_obj = factory(self, self._port, self._baudrate, settings().getFloat(["serial", "timeout", "connection"])) File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/util/comm.py", line 2672, in default serial_obj.open() File "/home/pi/oprint/local/lib/python2.7/site-packages/serial/serialposix.py", line 272, in open self._reconfigure_port(force_update=True) File "/home/pi/oprint/local/lib/python2.7/site-packages/serial/serialposix.py", line 312, in _reconfigure_port raise SerialException(msg.errno, "Could not exclusively lock port {}: {}".format(self._port, msg)) SerialException: [Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable 2019-12-15 06:11:02,366 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 06:11:03,206 - octoprint.plugins.tracking - INFO - Sent tracking event commerror_connection, payload: {'commerror_text': u'Connection error, see Terminal tab'} 2019-12-15 06:11:20,218 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Error: Connection error, see Terminal tab" 2019-12-15 06:11:20,225 - octoprint.util.comm - ERROR - Unexpected error while connecting to serial port: /dev/ttyACM0 SerialException: '[Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable' @ comm.py:_openSerial:2692 (hook default) Traceback (most recent call last): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/util/comm.py", line 2692, in _openSerial serial_obj = factory(self, self._port, self._baudrate, settings().getFloat(["serial", "timeout", "connection"])) File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/util/comm.py", line 2672, in default serial_obj.open() File "/home/pi/oprint/local/lib/python2.7/site-packages/serial/serialposix.py", line 272, in open self._reconfigure_port(force_update=True) File "/home/pi/oprint/local/lib/python2.7/site-packages/serial/serialposix.py", line 312, in _reconfigure_port raise SerialException(msg.errno, "Could not exclusively lock port {}: {}".format(self._port, msg)) SerialException: [Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable 2019-12-15 06:11:20,352 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 06:11:21,448 - octoprint.plugins.tracking - INFO - Sent tracking event commerror_connection, payload: {'commerror_text': u'Connection error, see Terminal tab'} 2019-12-15 06:11:29,250 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Error: Connection error, see Terminal tab" 2019-12-15 06:11:29,255 - octoprint.util.comm - ERROR - Unexpected error while connecting to serial port: /dev/ttyACM0 SerialException: '[Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable' @ comm.py:_openSerial:2692 (hook default) Traceback (most recent call last): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/util/comm.py", line 2692, in _openSerial serial_obj = factory(self, self._port, self._baudrate, settings().getFloat(["serial", "timeout", "connection"])) File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/util/comm.py", line 2672, in default serial_obj.open() File "/home/pi/oprint/local/lib/python2.7/site-packages/serial/serialposix.py", line 272, in open self._reconfigure_port(force_update=True) File "/home/pi/oprint/local/lib/python2.7/site-packages/serial/serialposix.py", line 312, in _reconfigure_port raise SerialException(msg.errno, "Could not exclusively lock port {}: {}".format(self._port, msg)) SerialException: [Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable 2019-12-15 06:11:29,645 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 06:11:30,648 - octoprint.plugins.tracking - INFO - Sent tracking event commerror_connection, payload: {'commerror_text': u'Connection error, see Terminal tab'} 2019-12-15 06:11:52,684 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial port" 2019-12-15 06:11:52,753 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial port" to "Opening serial port" 2019-12-15 06:11:52,756 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial port" to "Connecting" 2019-12-15 06:11:52,775 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2019-12-15 06:11:52,890 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2019-12-15 06:11:53,021 - octoprint.util.comm - INFO - Changing monitoring state from "Connecting" to "Operational" 2019-12-15 06:11:53,108 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2019-12-15 06:11:53,120 - octoprint.plugins.firmwareupdater - INFO - Got CONNECTED event 2019-12-15 06:11:53,128 - octoprint.plugins.firmwareupdater - INFO - Run postflash flag is set 2019-12-15 06:11:53,132 - octoprint.plugins.firmwareupdater - INFO - Sending post-flash commands:M300 S440 P200 2019-12-15 06:11:53,136 - octoprint.plugins.firmwareupdater - INFO - Clearing postflash flag 2019-12-15 06:11:53,307 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin 2.0.x (GitHub)" 2019-12-15 06:11:53,487 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting 2019-12-15 06:11:53,643 - octoprint.util.comm - INFO - Firmware states that it supports emergency GCODEs to be sent without waiting for an acknowledgement first 2019-12-15 06:11:54,296 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 06:11:55,323 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {u'printer_baudrate': 250000, u'printer_port': u'AUTO', 'firmware_name': u'Marlin 2.0.x (GitHub)'} 2019-12-15 06:11:55,887 - octoprint.util.comm - INFO - Externally triggered heatup detected 2019-12-15 06:12:09,326 - octoprint.util.comm - INFO - Printer seems to support the busy protocol, will adjust timeouts and set busy interval accordingly 2019-12-15 06:12:25,013 - octoprint.util.comm - INFO - Telling the printer to set the busy interval to our "communicationBusy" timeout - 1s = 2s 2019-12-15 06:18:05,990 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2019-12-15 06:18:06,780 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 10822} 2019-12-15 06:20:53,747 - octoprint.plugins.backup - INFO - Creating backup zip at /home/pi/.octoprint/data/backup/.octoprint-backup-20191215-062053.zip (excluded: timelapse,timelapse_tmp)... 2019-12-15 06:21:08,969 - octoprint.plugins.backup - INFO - ... done creating backup zip. 2019-12-15 06:33:06,004 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2019-12-15 06:33:06,898 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 11722} 2019-12-15 06:37:12,441 - octoprint.plugins.firmwareupdater - INFO - Firmware update started 2019-12-15 06:37:12,444 - octoprint.plugins.firmwareupdater - INFO - Disconnecting from printer 2019-12-15 06:37:12,482 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Offline" 2019-12-15 06:37:12,501 - octoprint.plugins.firmwareupdater - INFO - Release the firmware lock on the SD Card by sending 'M22' to '/dev/ttyACM0' 2019-12-15 06:37:12,524 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 06:37:12,626 - octoprint.plugins.firmwareupdater - INFO - Waiting for SD card to be available at '/media/usb' 2019-12-15 06:37:12,672 - octoprint.plugins.firmwareupdater - INFO - Firmware update folder '/media/usb' available for writing after 0.0 seconds 2019-12-15 06:37:12,699 - octoprint.plugins.firmwareupdater - INFO - Copying firmware to update folder '/tmp/tmpyCTPSg' -> '/media/usb/firmware.bin' 2019-12-15 06:37:13,736 - octoprint.plugins.firmwareupdater - INFO - Unmounting SD card: 'sudo umount /media/usb' 2019-12-15 06:37:13,821 - octoprint.plugins.firmwareupdater - INFO - Firmware update reset: attempting to reset the board 2019-12-15 06:37:13,826 - octoprint.plugins.firmwareupdater - INFO - Resetting LPC1768 at '/dev/ttyACM0' 2019-12-15 06:37:13,942 - octoprint.plugins.firmwareupdater - INFO - Waiting for LPC1768 at '/dev/ttyACM0' to reset 2019-12-15 06:37:14,623 - octoprint.plugins.firmwareupdater - INFO - LPC1768 at '/dev/ttyACM0' is resetting 2019-12-15 06:37:20,275 - octoprint.plugins.firmwareupdater - INFO - LPC1768 at '/dev/ttyACM0' reset in 6.32 seconds 2019-12-15 06:37:20,282 - octoprint.plugins.firmwareupdater - INFO - Post-flash delay: 30s 2019-12-15 06:37:20,447 - octoprint.plugins.portlister - INFO - on_port_created connection_options {u'portPreference': None, u'autoconnect': True, u'baudrates': [250000, 230400, 115200, 57600, 38400, 19200, 9600], u'ports': [u'/dev/ttyACM0'], u'baudratePreference': 250000} 2019-12-15 06:37:20,449 - octoprint.plugins.portlister - INFO - Checking if /dev/ttyACM0 is in [u'/dev/ttyACM0'] 2019-12-15 06:37:20,456 - octoprint.plugins.portlister - INFO - autoconnect_delay 20 2019-12-15 06:37:21,535 - octoprint.plugins.portlister - INFO - on_port_created connection_options {u'portPreference': None, u'autoconnect': True, u'baudrates': [250000, 230400, 115200, 57600, 38400, 19200, 9600], u'ports': [u'/dev/ttyACM0'], u'baudratePreference': 250000} 2019-12-15 06:37:21,539 - octoprint.plugins.portlister - INFO - Checking if /dev/sg0 is in [u'/dev/ttyACM0'] 2019-12-15 06:37:21,542 - octoprint.plugins.portlister - WARNING - Won't autoconnect because /dev/sg0 isn't in [u'/dev/ttyACM0'] 2019-12-15 06:37:21,590 - octoprint.plugins.portlister - INFO - on_port_created connection_options {u'portPreference': None, u'autoconnect': True, u'baudrates': [250000, 230400, 115200, 57600, 38400, 19200, 9600], u'ports': [u'/dev/ttyACM0'], u'baudratePreference': 250000} 2019-12-15 06:37:21,592 - octoprint.plugins.portlister - INFO - Checking if /dev/sda is in [u'/dev/ttyACM0'] 2019-12-15 06:37:21,595 - octoprint.plugins.portlister - WARNING - Won't autoconnect because /dev/sda isn't in [u'/dev/ttyACM0'] 2019-12-15 06:37:40,479 - octoprint.plugins.portlister - INFO - do_auto_connect 2019-12-15 06:37:40,486 - octoprint.plugins.portlister - INFO - realpath match 2019-12-15 06:37:40,585 - octoprint.plugins.portlister - INFO - Attempting to connect to AUTO at 250000 with profile '_default' 2019-12-15 06:37:40,676 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial port" 2019-12-15 06:37:40,717 - octoprint.plugins.portlister - INFO - on_port_created connection_options {u'portPreference': None, u'autoconnect': True, u'baudrates': [250000, 230400, 115200, 57600, 38400, 19200, 9600], u'ports': [u'/dev/ttyACM0'], u'baudratePreference': 250000} 2019-12-15 06:37:40,718 - octoprint.plugins.portlister - INFO - Checking if /dev/sda1 is in [u'/dev/ttyACM0'] 2019-12-15 06:37:40,719 - octoprint.plugins.portlister - WARNING - Won't autoconnect because /dev/sda1 isn't in [u'/dev/ttyACM0'] 2019-12-15 06:37:40,736 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial port" to "Opening serial port" 2019-12-15 06:37:40,743 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial port" to "Connecting" 2019-12-15 06:37:40,752 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2019-12-15 06:37:42,029 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2019-12-15 06:37:42,054 - octoprint.util.comm - INFO - Changing monitoring state from "Connecting" to "Operational" 2019-12-15 06:37:42,094 - octoprint.plugins.firmwareupdater - INFO - Got CONNECTED event 2019-12-15 06:37:42,106 - octoprint.plugins.firmwareupdater - INFO - Run postflash flag is not set 2019-12-15 06:37:42,118 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2019-12-15 06:37:42,113 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 06:37:42,134 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin 2.0.x (GitHub)" 2019-12-15 06:37:42,305 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting 2019-12-15 06:37:42,330 - octoprint.util.comm - INFO - Firmware states that it supports emergency GCODEs to be sent without waiting for an acknowledgement first 2019-12-15 06:37:43,208 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {u'printer_baudrate': 250000, u'printer_port': 'AUTO', 'firmware_name': u'Marlin 2.0.x (GitHub)'} 2019-12-15 06:37:50,316 - octoprint.plugins.firmwareupdater - INFO - Flashing successful. 2019-12-15 06:37:50,330 - octoprint.plugins.firmwareupdater - INFO - Setting run_postflash_gcode flag to true 2019-12-15 06:37:51,192 - octoprint.plugins.firmwareupdater - INFO - Reconnecting to printer: port=/dev/ttyACM0, baudrate=250000, profile={'heatedChamber': False, 'name': 'Nova Ender 3', 'color': 'default', 'axes': {'y': {'speed': 6000, 'inverted': False}, 'x': {'speed': 6000, 'inverted': False}, 'z': {'speed': 200, 'inverted': False}, 'e': {'speed': 300, 'inverted': False}}, 'heatedBed': True, 'volume': {'origin': 'lowerleft', 'formFactor': 'rectangular', 'depth': 226.0, 'width': 233.0, 'custom_box': False, 'height': 250.0}, 'model': 'Creality Ender 3', 'id': '_default', 'extruder': {'count': 1, 'nozzleDiameter': 0.4, 'offsets': [(0.0, 0.0)], 'sharedNozzle': False}} 2019-12-15 06:37:51,212 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Offline" 2019-12-15 06:37:51,244 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 06:37:51,504 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Opening serial port" 2019-12-15 06:37:51,512 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial port" to "Connecting" 2019-12-15 06:37:51,525 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2019-12-15 06:37:51,553 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2019-12-15 06:37:51,566 - octoprint.util.comm - INFO - Changing monitoring state from "Connecting" to "Operational" 2019-12-15 06:37:51,630 - octoprint.plugins.firmwareupdater - INFO - Got CONNECTED event 2019-12-15 06:37:51,631 - octoprint.plugins.firmwareupdater - INFO - Run postflash flag is set 2019-12-15 06:37:51,634 - octoprint.plugins.firmwareupdater - INFO - Sending post-flash commands:M300 S440 P200 2019-12-15 06:37:51,637 - octoprint.plugins.firmwareupdater - INFO - Clearing postflash flag 2019-12-15 06:37:51,646 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2019-12-15 06:37:51,949 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin 2.0.x (GitHub)" 2019-12-15 06:37:52,492 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 06:37:52,496 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting 2019-12-15 06:37:52,673 - octoprint.util.comm - INFO - Firmware states that it supports emergency GCODEs to be sent without waiting for an acknowledgement first 2019-12-15 06:37:52,719 - octoprint.util.comm - INFO - Externally triggered heatup detected 2019-12-15 06:37:53,424 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {u'printer_baudrate': 250000, u'printer_port': '/dev/ttyACM0', 'firmware_name': u'Marlin 2.0.x (GitHub)'} 2019-12-15 06:37:54,788 - octoprint.util.comm - INFO - Externally triggered heatup detected 2019-12-15 06:42:42,298 - octoprint.server.api.system - INFO - Performing command for custom:restart stream 2019-12-15 06:44:40,519 - octoprint.filemanager.analysis - INFO - Starting analysis of local:OctolaspeTests/hollow_cube_PLA0.32mm_0.4n_Ender3_3m.gcode 2019-12-15 06:44:40,548 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 06:44:42,025 - octoprint.filemanager.analysis - INFO - Analysis of entry local:OctolaspeTests/hollow_cube_PLA0.32mm_0.4n_Ender3_3m.gcode finished, needed 1.51s 2019-12-15 06:44:55,845 - octoprint.printer.standard.job - INFO - Print job selected - origin: local, path: OctolaspeTests/hollow_cube_PLA0.32mm_0.4n_Ender3_3m.gcode, owner: NovaViper, user: NovaViper 2019-12-15 06:44:55,863 - octoprint.plugins.DisplayLayerProgress - INFO - File selected. Determining number of layers. 2019-12-15 06:44:55,883 - octoprint.plugin - ERROR - Error while calling plugin DisplayLayerProgress Traceback (most recent call last): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/plugin/__init__.py", line 224, in call_plugin result = getattr(plugin, method)(*args, **kwargs) File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_DisplayLayerProgress/__init__.py", line 344, in on_event with open(selectedFile, "r") as f: IOError: [Errno 2] No such file or directory: '' 2019-12-15 06:44:56,041 - octoprint.plugin - ERROR - Error while calling plugin cancelobject Traceback (most recent call last): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/plugin/__init__.py", line 224, in call_plugin result = getattr(plugin, method)(*args, **kwargs) File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_cancelobject/__init__.py", line 250, in on_event with open(selectedFile, "r") as f: IOError: [Errno 2] No such file or directory: '' 2019-12-15 06:45:19,767 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting" 2019-12-15 06:45:19,783 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: OctolaspeTests/hollow_cube_PLA0.32mm_0.4n_Ender3_3m.gcode, owner: NovaViper, user: NovaViper 2019-12-15 06:45:19,847 - octoprint.plugins.DisplayLayerProgress - INFO - Printing started. Detailed progress started.{'origin': u'local', 'name': u'hollow_cube_PLA0.32mm_0.4n_Ender3_3m.gcode', u'user': 'NovaViper', u'owner': 'NovaViper', 'path': u'OctolaspeTests/hollow_cube_PLA0.32mm_0.4n_Ender3_3m.gcode', 'size': 55676L} 2019-12-15 06:45:19,866 - octoprint.plugin - ERROR - Error while calling plugin cancelobject Traceback (most recent call last): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/plugin/__init__.py", line 224, in call_plugin result = getattr(plugin, method)(*args, **kwargs) File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_cancelobject/__init__.py", line 250, in on_event with open(selectedFile, "r") as f: IOError: [Errno 2] No such file or directory: '' 2019-12-15 06:45:20,097 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Printing" 2019-12-15 06:45:20,114 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2019-12-15 06:45:20,117 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 06:45:20,709 - octoprint.plugins.tracking - INFO - Sent tracking event print_started, payload: {'origin': u'local', 'file': 'a98961362d6143aecfbde25f7c2cd56edbf8c530'} 2019-12-15 06:45:22,623 - octoprint.util.comm - INFO - Printer seems to support the busy protocol, will adjust timeouts and set busy interval accordingly 2019-12-15 06:45:30,251 - octoprint.util.comm - INFO - Telling the printer to set the busy interval to our "communicationBusy" timeout - 1s = 2s 2019-12-15 06:45:59,273 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Pausing" 2019-12-15 06:45:59,291 - octoprint.plugins.filamentmanager - INFO - Filament used: 0.0 mm (tool0) 2019-12-15 06:46:10,325 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 06:46:10,322 - octoprint.printer.standard.job - INFO - Print job paused - origin: local, path: OctolaspeTests/hollow_cube_PLA0.32mm_0.4n_Ender3_3m.gcode, owner: NovaViper, user: NovaViper 2019-12-15 06:46:10,506 - octoprint.util.comm - INFO - Changing monitoring state from "Pausing" to "Paused" 2019-12-15 06:47:09,682 - octoprint.util.comm - INFO - Changing monitoring state from "Paused" to "Resuming" 2019-12-15 06:47:09,705 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer. 2019-12-15 06:47:09,718 - octoprint.printer.standard.job - INFO - Print job resumed - origin: local, path: OctolaspeTests/hollow_cube_PLA0.32mm_0.4n_Ender3_3m.gcode, owner: NovaViper, user: NovaViper 2019-12-15 06:47:09,744 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 06:47:09,872 - octoprint.util.comm - INFO - Changing monitoring state from "Resuming" to "Printing" 2019-12-15 06:47:10,777 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Pausing" 2019-12-15 06:47:10,789 - octoprint.plugins.filamentmanager - INFO - Filament used: 0.0 mm (tool0) 2019-12-15 06:47:12,923 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer. 2019-12-15 06:47:22,971 - octoprint.printer.standard.job - INFO - Print job paused - origin: local, path: OctolaspeTests/hollow_cube_PLA0.32mm_0.4n_Ender3_3m.gcode, owner: NovaViper, user: NovaViper 2019-12-15 06:47:22,977 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 06:47:27,984 - octoprint.util.comm - INFO - No response from printer after 6 consecutive communication timeouts, considering it dead. 2019-12-15 06:47:28,160 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 06:47:28,209 - octoprint.util.comm - INFO - Changing monitoring state from "Pausing" to "Offline (Error: Too many consecutive timeouts, printer still connected and alive?)" 2019-12-15 06:47:28,713 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 06:47:29,331 - octoprint.plugins.tracking - INFO - Sent tracking event commerror_timeout, payload: {'commerror_text': u'Too many consecutive timeouts, printer still connected and alive?'} 2019-12-15 06:47:35,157 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 06:48:00,166 - octoprint.plugins.portlister - INFO - on_port_created connection_options {u'portPreference': None, u'autoconnect': True, u'baudrates': [250000, 230400, 115200, 57600, 38400, 19200, 9600], u'ports': [u'/dev/ttyACM0'], u'baudratePreference': 250000} 2019-12-15 06:48:00,167 - octoprint.plugins.portlister - INFO - Checking if /dev/ttyACM0 is in [u'/dev/ttyACM0'] 2019-12-15 06:48:00,171 - octoprint.plugins.portlister - INFO - autoconnect_delay 20 2019-12-15 06:48:01,168 - octoprint.plugins.portlister - INFO - on_port_created connection_options {u'portPreference': None, u'autoconnect': True, u'baudrates': [250000, 230400, 115200, 57600, 38400, 19200, 9600], u'ports': [u'/dev/ttyACM0'], u'baudratePreference': 250000} 2019-12-15 06:48:01,169 - octoprint.plugins.portlister - INFO - Checking if /dev/sg0 is in [u'/dev/ttyACM0'] 2019-12-15 06:48:01,170 - octoprint.plugins.portlister - WARNING - Won't autoconnect because /dev/sg0 isn't in [u'/dev/ttyACM0'] 2019-12-15 06:48:01,193 - octoprint.plugins.portlister - INFO - on_port_created connection_options {u'portPreference': None, u'autoconnect': True, u'baudrates': [250000, 230400, 115200, 57600, 38400, 19200, 9600], u'ports': [u'/dev/ttyACM0'], u'baudratePreference': 250000} 2019-12-15 06:48:01,195 - octoprint.plugins.portlister - INFO - Checking if /dev/sda is in [u'/dev/ttyACM0'] 2019-12-15 06:48:01,197 - octoprint.plugins.portlister - WARNING - Won't autoconnect because /dev/sda isn't in [u'/dev/ttyACM0'] 2019-12-15 06:48:06,009 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2019-12-15 06:48:06,677 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial port" 2019-12-15 06:48:06,719 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 12622} 2019-12-15 06:48:06,745 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial port" to "Opening serial port" 2019-12-15 06:48:06,757 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial port" to "Connecting" 2019-12-15 06:48:06,767 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2019-12-15 06:48:06,777 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2019-12-15 06:48:20,177 - octoprint.plugins.portlister - INFO - do_auto_connect 2019-12-15 06:48:20,180 - octoprint.plugins.portlister - INFO - realpath match 2019-12-15 06:48:20,222 - octoprint.plugins.portlister - WARNING - Not auto connecting because printer is not closed nor in error state. 2019-12-15 06:48:20,224 - octoprint.plugins.portlister - INFO - Not autoconnecting; printer already connected 2019-12-15 06:48:21,694 - octoprint.util.comm - INFO - Changing monitoring state from "Connecting" to "Operational" 2019-12-15 06:48:21,703 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2019-12-15 06:48:21,724 - octoprint.plugins.firmwareupdater - INFO - Got CONNECTED event 2019-12-15 06:48:21,727 - octoprint.plugins.firmwareupdater - INFO - Run postflash flag is not set 2019-12-15 06:48:21,730 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 06:48:21,942 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin 2.0.x (GitHub)" 2019-12-15 06:48:21,963 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting 2019-12-15 06:48:22,006 - octoprint.util.comm - INFO - Firmware states that it supports emergency GCODEs to be sent without waiting for an acknowledgement first 2019-12-15 06:48:22,717 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {u'printer_baudrate': 250000, u'printer_port': None, 'firmware_name': u'Marlin 2.0.x (GitHub)'} 2019-12-15 06:48:25,516 - octoprint.printer.standard.job - INFO - Print job selected - origin: local, path: OctolaspeTests/hollow_cube_PLA0.32mm_0.4n_Ender3_3m.gcode, owner: NovaViper, user: NovaViper 2019-12-15 06:48:25,526 - octoprint.plugins.DisplayLayerProgress - INFO - File selected. Determining number of layers. 2019-12-15 06:48:25,556 - octoprint.plugin - ERROR - Error while calling plugin DisplayLayerProgress Traceback (most recent call last): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/plugin/__init__.py", line 224, in call_plugin result = getattr(plugin, method)(*args, **kwargs) File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_DisplayLayerProgress/__init__.py", line 344, in on_event with open(selectedFile, "r") as f: IOError: [Errno 2] No such file or directory: '' 2019-12-15 06:48:25,744 - octoprint.plugin - ERROR - Error while calling plugin cancelobject Traceback (most recent call last): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/plugin/__init__.py", line 224, in call_plugin result = getattr(plugin, method)(*args, **kwargs) File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_cancelobject/__init__.py", line 250, in on_event with open(selectedFile, "r") as f: IOError: [Errno 2] No such file or directory: '' 2019-12-15 06:48:34,444 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting" 2019-12-15 06:48:34,460 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: OctolaspeTests/hollow_cube_PLA0.32mm_0.4n_Ender3_3m.gcode, owner: NovaViper, user: NovaViper 2019-12-15 06:48:34,542 - octoprint.plugins.DisplayLayerProgress - INFO - Printing started. Detailed progress started.{'origin': u'local', 'name': u'hollow_cube_PLA0.32mm_0.4n_Ender3_3m.gcode', u'user': 'NovaViper', u'owner': 'NovaViper', 'path': u'OctolaspeTests/hollow_cube_PLA0.32mm_0.4n_Ender3_3m.gcode', 'size': 55676L} 2019-12-15 06:48:34,555 - octoprint.plugin - ERROR - Error while calling plugin cancelobject Traceback (most recent call last): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/plugin/__init__.py", line 224, in call_plugin result = getattr(plugin, method)(*args, **kwargs) File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_cancelobject/__init__.py", line 250, in on_event with open(selectedFile, "r") as f: IOError: [Errno 2] No such file or directory: '' 2019-12-15 06:48:34,769 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Printing" 2019-12-15 06:48:34,783 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 06:48:34,790 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2019-12-15 06:48:35,419 - octoprint.plugins.tracking - INFO - Sent tracking event print_started, payload: {'origin': u'local', 'file': 'a98961362d6143aecfbde25f7c2cd56edbf8c530'} 2019-12-15 06:48:37,338 - octoprint.util.comm - INFO - Printer seems to support the busy protocol, will adjust timeouts and set busy interval accordingly 2019-12-15 06:48:43,043 - octoprint.util.comm - INFO - Telling the printer to set the busy interval to our "communicationBusy" timeout - 1s = 2s 2019-12-15 06:49:19,749 - octoprint.plugins.cancelobject - INFO - Tracking Extrusion 2019-12-15 06:49:20,045 - octoprint.plugins.cancelobject - INFO - Not Tracking Extrusion 2019-12-15 06:49:23,417 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Pausing" 2019-12-15 06:49:23,429 - octoprint.plugins.filamentmanager - INFO - Filament used: 0.0 mm (tool0) 2019-12-15 06:49:34,672 - octoprint.plugins.cancelobject - INFO - Tracking Extrusion 2019-12-15 06:49:35,565 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 06:49:35,560 - octoprint.printer.standard.job - INFO - Print job paused - origin: local, path: OctolaspeTests/hollow_cube_PLA0.32mm_0.4n_Ender3_3m.gcode, owner: NovaViper, user: NovaViper 2019-12-15 06:49:35,741 - octoprint.util.comm - INFO - Changing monitoring state from "Pausing" to "Paused" 2019-12-15 06:49:38,325 - octoprint.util.comm - INFO - Changing monitoring state from "Paused" to "Resuming" 2019-12-15 06:49:38,347 - octoprint.printer.standard.job - INFO - Print job resumed - origin: local, path: OctolaspeTests/hollow_cube_PLA0.32mm_0.4n_Ender3_3m.gcode, owner: NovaViper, user: NovaViper 2019-12-15 06:49:38,354 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 06:49:38,544 - octoprint.util.comm - INFO - Changing monitoring state from "Resuming" to "Printing" 2019-12-15 06:49:38,739 - octoprint.plugins.cancelobject - INFO - Not Tracking Extrusion 2019-12-15 06:49:45,649 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Pausing" 2019-12-15 06:49:45,659 - octoprint.plugins.filamentmanager - INFO - Filament used: 0.0 mm (tool0) 2019-12-15 06:49:47,093 - octoprint.printer.standard.job - INFO - Print job paused - origin: local, path: OctolaspeTests/hollow_cube_PLA0.32mm_0.4n_Ender3_3m.gcode, owner: NovaViper, user: NovaViper 2019-12-15 06:49:47,100 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 06:49:47,288 - octoprint.util.comm - INFO - Changing monitoring state from "Pausing" to "Paused" 2019-12-15 06:50:12,644 - octoprint.util.comm - INFO - Changing monitoring state from "Paused" to "Resuming" 2019-12-15 06:50:12,667 - octoprint.printer.standard.job - INFO - Print job resumed - origin: local, path: OctolaspeTests/hollow_cube_PLA0.32mm_0.4n_Ender3_3m.gcode, owner: NovaViper, user: NovaViper 2019-12-15 06:50:12,673 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 06:50:12,737 - octoprint.util.comm - INFO - Changing monitoring state from "Resuming" to "Printing" 2019-12-15 06:50:58,819 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Pausing" 2019-12-15 06:50:58,832 - octoprint.plugins.filamentmanager - INFO - Filament used: 0.0 mm (tool0) 2019-12-15 06:51:03,311 - octoprint.printer.standard.job - INFO - Print job paused - origin: local, path: OctolaspeTests/hollow_cube_PLA0.32mm_0.4n_Ender3_3m.gcode, owner: NovaViper, user: NovaViper 2019-12-15 06:51:03,317 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 06:51:03,601 - octoprint.util.comm - INFO - Changing monitoring state from "Pausing" to "Paused" 2019-12-15 06:51:07,379 - octoprint.util.comm - INFO - Changing monitoring state from "Paused" to "Cancelling" 2019-12-15 06:51:07,391 - octoprint.util.comm - INFO - Force-sending M108 to the printer 2019-12-15 06:51:07,393 - octoprint.util.comm - INFO - Force-sending M108 to the printer 2019-12-15 06:51:07,422 - octoprint.printer.standard.job - INFO - Print job cancelled - origin: local, path: OctolaspeTests/hollow_cube_PLA0.32mm_0.4n_Ender3_3m.gcode, owner: NovaViper, user: NovaViper 2019-12-15 06:51:07,490 - octoprint.util.comm - INFO - Changing monitoring state from "Cancelling" to "Operational" 2019-12-15 06:51:07,503 - octoprint.plugins.DisplayLayerProgress - INFO - Printing stopped. Detailed progress stopped. 2019-12-15 06:51:07,556 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 06:51:07,904 - octoprint.plugins.DisplayLayerProgress - INFO - Printing stopped. Detailed progress stopped. 2019-12-15 06:51:07,928 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 06:51:08,467 - octoprint.plugins.tracking - INFO - Sent tracking event print_cancelled, payload: {'origin': u'local', 'file': 'a98961362d6143aecfbde25f7c2cd56edbf8c530', u'elapsed': 111} 2019-12-15 06:51:09,277 - octoprint.plugins.tracking - INFO - Sent tracking event print_failed, payload: {'origin': u'local', u'reason': u'cancelled', 'file': 'a98961362d6143aecfbde25f7c2cd56edbf8c530', u'elapsed': 111} 2019-12-15 06:51:35,950 - octoprint.util.comm - INFO - Force-sending M876 to the printer 2019-12-15 06:53:31,387 - octoprint.util.comm - INFO - Force-sending M876 to the printer 2019-12-15 06:53:38,603 - octoprint.util.comm - INFO - Force-sending M876 to the printer 2019-12-15 06:55:39,672 - octoprint.util.comm - INFO - Force-sending M876 to the printer 2019-12-15 06:55:50,062 - octoprint.util.comm - INFO - Force-sending M876 to the printer 2019-12-15 06:58:06,855 - octoprint.util.comm - INFO - Force-sending M876 to the printer 2019-12-15 06:58:15,798 - octoprint.util.comm - INFO - Force-sending M876 to the printer 2019-12-15 07:02:17,299 - octoprint.util.comm - INFO - Force-sending M876 to the printer 2019-12-15 07:02:18,723 - tornado.access - WARNING - 409 POST /api/plugin/action_command_prompt (192.168.1.121) 21.36ms 2019-12-15 07:02:49,627 - octoprint.util.comm - INFO - Not sending M0 to printer, it's configured as a blocked command 2019-12-15 07:02:55,399 - octoprint.util.comm - INFO - Not sending M1 to printer, it's configured as a blocked command 2019-12-15 07:03:06,011 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2019-12-15 07:03:06,724 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 13522} 2019-12-15 07:03:26,283 - octoprint.util.comm - INFO - Not sending M1 to printer, it's configured as a blocked command 2019-12-15 07:03:31,933 - octoprint.util.comm - INFO - Not sending M0 to printer, it's configured as a blocked command 2019-12-15 07:03:44,733 - octoprint.util.comm - INFO - Not sending M0 to printer, it's configured as a blocked command 2019-12-15 07:04:42,853 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting" 2019-12-15 07:04:42,868 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: OctolaspeTests/hollow_cube_PLA0.32mm_0.4n_Ender3_3m.gcode, owner: NovaViper, user: NovaViper 2019-12-15 07:04:42,939 - octoprint.plugins.DisplayLayerProgress - INFO - Printing started. Detailed progress started.{'origin': u'local', 'name': u'hollow_cube_PLA0.32mm_0.4n_Ender3_3m.gcode', u'user': 'NovaViper', u'owner': 'NovaViper', 'path': u'OctolaspeTests/hollow_cube_PLA0.32mm_0.4n_Ender3_3m.gcode', 'size': 55676L} 2019-12-15 07:04:42,964 - octoprint.plugin - ERROR - Error while calling plugin cancelobject Traceback (most recent call last): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/plugin/__init__.py", line 224, in call_plugin result = getattr(plugin, method)(*args, **kwargs) File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_cancelobject/__init__.py", line 250, in on_event with open(selectedFile, "r") as f: IOError: [Errno 2] No such file or directory: '' 2019-12-15 07:04:43,168 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Printing" 2019-12-15 07:04:43,188 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2019-12-15 07:04:43,192 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 07:04:44,074 - octoprint.plugins.tracking - INFO - Sent tracking event print_started, payload: {'origin': u'local', 'file': 'a98961362d6143aecfbde25f7c2cd56edbf8c530'} 2019-12-15 07:05:21,713 - octoprint.plugins.cancelobject - INFO - Tracking Extrusion 2019-12-15 07:05:21,943 - octoprint.plugins.cancelobject - INFO - Not Tracking Extrusion 2019-12-15 07:05:53,448 - octoprint.plugins.cancelobject - INFO - Tracking Extrusion 2019-12-15 07:05:53,580 - octoprint.plugins.cancelobject - INFO - Not Tracking Extrusion 2019-12-15 07:05:56,531 - octoprint.util.comm - INFO - Force-sending M876 to the printer 2019-12-15 07:05:58,293 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Pausing" 2019-12-15 07:05:58,309 - octoprint.plugins.filamentmanager - INFO - Filament used: 0.0 mm (tool0) 2019-12-15 07:06:00,609 - octoprint.printer.standard.job - INFO - Print job paused - origin: local, path: OctolaspeTests/hollow_cube_PLA0.32mm_0.4n_Ender3_3m.gcode, owner: NovaViper, user: NovaViper 2019-12-15 07:06:00,615 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 07:06:00,882 - octoprint.util.comm - INFO - Changing monitoring state from "Pausing" to "Paused" 2019-12-15 07:06:21,046 - octoprint.util.comm - INFO - Changing monitoring state from "Paused" to "Resuming" 2019-12-15 07:06:21,089 - octoprint.printer.standard.job - INFO - Print job resumed - origin: local, path: OctolaspeTests/hollow_cube_PLA0.32mm_0.4n_Ender3_3m.gcode, owner: NovaViper, user: NovaViper 2019-12-15 07:06:21,099 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 07:06:21,105 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer. 2019-12-15 07:06:21,347 - octoprint.util.comm - INFO - Changing monitoring state from "Resuming" to "Printing" 2019-12-15 07:07:05,163 - octoprint.util.comm - INFO - Pausing print job due to command M25 2019-12-15 07:07:05,164 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Pausing" 2019-12-15 07:07:05,189 - octoprint.plugins.filamentmanager - INFO - Filament used: 0.0 mm (tool0) 2019-12-15 07:07:14,077 - octoprint.printer.standard.job - INFO - Print job paused - origin: local, path: OctolaspeTests/hollow_cube_PLA0.32mm_0.4n_Ender3_3m.gcode, owner: NovaViper, user: None 2019-12-15 07:07:14,091 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 07:07:14,102 - octoprint.plugin - ERROR - Error while calling plugin stats Traceback (most recent call last): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/plugin/__init__.py", line 224, in call_plugin result = getattr(plugin, method)(*args, **kwargs) File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_stats/__init__.py", line 950, in on_event user = payload["user"] KeyError: 'user' 2019-12-15 07:07:43,791 - octoprint.util.comm - INFO - Changing monitoring state from "Pausing" to "Resuming" 2019-12-15 07:07:43,808 - octoprint.printer.standard.job - INFO - Print job resumed - origin: local, path: OctolaspeTests/hollow_cube_PLA0.32mm_0.4n_Ender3_3m.gcode, owner: NovaViper, user: None 2019-12-15 07:07:43,816 - octoprint.util.comm - INFO - Force-sending M876 to the printer 2019-12-15 07:07:43,824 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 07:07:43,832 - octoprint.plugin - ERROR - Error while calling plugin stats Traceback (most recent call last): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/plugin/__init__.py", line 224, in call_plugin result = getattr(plugin, method)(*args, **kwargs) File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_stats/__init__.py", line 966, in on_event user = payload["user"] KeyError: 'user' 2019-12-15 07:07:43,835 - octoprint.util.comm - INFO - Pausing print job due to command M25 2019-12-15 07:07:43,836 - octoprint.util.comm - INFO - Changing monitoring state from "Resuming" to "Pausing" 2019-12-15 07:07:57,021 - octoprint.util.comm - INFO - Changing monitoring state from "Pausing" to "Resuming" 2019-12-15 07:07:57,043 - octoprint.printer.standard.job - INFO - Print job resumed - origin: local, path: OctolaspeTests/hollow_cube_PLA0.32mm_0.4n_Ender3_3m.gcode, owner: NovaViper, user: None 2019-12-15 07:07:57,049 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 07:07:57,055 - octoprint.plugin - ERROR - Error while calling plugin stats Traceback (most recent call last): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/plugin/__init__.py", line 224, in call_plugin result = getattr(plugin, method)(*args, **kwargs) File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_stats/__init__.py", line 966, in on_event user = payload["user"] KeyError: 'user' 2019-12-15 07:07:57,173 - octoprint.util.comm - INFO - Changing monitoring state from "Resuming" to "Pausing" 2019-12-15 07:07:57,188 - octoprint.printer.standard.job - INFO - Print job paused - origin: local, path: OctolaspeTests/hollow_cube_PLA0.32mm_0.4n_Ender3_3m.gcode, owner: NovaViper, user: None 2019-12-15 07:07:57,197 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 07:07:57,200 - octoprint.plugin - ERROR - Error while calling plugin stats Traceback (most recent call last): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/plugin/__init__.py", line 224, in call_plugin result = getattr(plugin, method)(*args, **kwargs) File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_stats/__init__.py", line 950, in on_event user = payload["user"] KeyError: 'user' 2019-12-15 07:08:09,947 - tornado.access - WARNING - 409 POST /api/plugin/action_command_prompt (192.168.1.121) 22.26ms 2019-12-15 07:08:10,527 - octoprint.util.comm - INFO - Changing monitoring state from "Pausing" to "Resuming" 2019-12-15 07:08:10,545 - octoprint.printer.standard.job - INFO - Print job resumed - origin: local, path: OctolaspeTests/hollow_cube_PLA0.32mm_0.4n_Ender3_3m.gcode, owner: NovaViper, user: None 2019-12-15 07:08:10,551 - octoprint.util.comm - INFO - Force-sending M876 to the printer 2019-12-15 07:08:10,562 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 07:08:10,564 - octoprint.plugin - ERROR - Error while calling plugin stats Traceback (most recent call last): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/plugin/__init__.py", line 224, in call_plugin result = getattr(plugin, method)(*args, **kwargs) File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_stats/__init__.py", line 966, in on_event user = payload["user"] KeyError: 'user' 2019-12-15 07:08:10,667 - octoprint.util.comm - INFO - Changing monitoring state from "Resuming" to "Printing" 2019-12-15 07:08:10,935 - octoprint.printer.standard.job - INFO - Print job paused - origin: local, path: OctolaspeTests/hollow_cube_PLA0.32mm_0.4n_Ender3_3m.gcode, owner: NovaViper, user: None 2019-12-15 07:08:10,940 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 07:08:10,945 - octoprint.plugin - ERROR - Error while calling plugin stats Traceback (most recent call last): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/plugin/__init__.py", line 224, in call_plugin result = getattr(plugin, method)(*args, **kwargs) File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_stats/__init__.py", line 950, in on_event user = payload["user"] KeyError: 'user' 2019-12-15 07:08:44,884 - octoprint.util.comm - INFO - Pausing print job due to command M25 2019-12-15 07:08:44,887 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Pausing" 2019-12-15 07:08:44,900 - octoprint.plugins.filamentmanager - INFO - Filament used: 0.0 mm (tool0) 2019-12-15 07:09:14,035 - octoprint.util.comm - INFO - Changing monitoring state from "Pausing" to "Resuming" 2019-12-15 07:09:14,057 - octoprint.printer.standard.job - INFO - Print job resumed - origin: local, path: OctolaspeTests/hollow_cube_PLA0.32mm_0.4n_Ender3_3m.gcode, owner: NovaViper, user: None 2019-12-15 07:09:14,063 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 07:09:14,069 - octoprint.plugin - ERROR - Error while calling plugin stats Traceback (most recent call last): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/plugin/__init__.py", line 224, in call_plugin result = getattr(plugin, method)(*args, **kwargs) File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_stats/__init__.py", line 966, in on_event user = payload["user"] KeyError: 'user' 2019-12-15 07:09:14,072 - octoprint.util.comm - INFO - Force-sending M876 to the printer 2019-12-15 07:09:14,430 - octoprint.util.comm - INFO - Changing monitoring state from "Resuming" to "Printing" 2019-12-15 07:09:14,474 - octoprint.printer.standard.job - INFO - Print job paused - origin: local, path: OctolaspeTests/hollow_cube_PLA0.32mm_0.4n_Ender3_3m.gcode, owner: NovaViper, user: None 2019-12-15 07:09:14,480 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 07:09:14,484 - octoprint.plugin - ERROR - Error while calling plugin stats Traceback (most recent call last): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/plugin/__init__.py", line 224, in call_plugin result = getattr(plugin, method)(*args, **kwargs) File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_stats/__init__.py", line 950, in on_event user = payload["user"] KeyError: 'user' 2019-12-15 07:09:56,691 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Cancelling" 2019-12-15 07:09:56,699 - octoprint.util.comm - INFO - Force-sending M108 to the printer 2019-12-15 07:09:56,703 - octoprint.util.comm - INFO - Force-sending M108 to the printer 2019-12-15 07:09:56,785 - octoprint.plugins.filamentmanager - INFO - Filament used: 0.0 mm (tool0) 2019-12-15 07:09:56,959 - octoprint.printer.standard.job - INFO - Print job cancelled - origin: local, path: OctolaspeTests/hollow_cube_PLA0.32mm_0.4n_Ender3_3m.gcode, owner: NovaViper, user: NovaViper 2019-12-15 07:09:57,143 - octoprint.plugins.DisplayLayerProgress - INFO - Printing stopped. Detailed progress stopped. 2019-12-15 07:09:57,190 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 07:09:57,556 - octoprint.plugins.DisplayLayerProgress - INFO - Printing stopped. Detailed progress stopped. 2019-12-15 07:09:57,599 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 07:09:57,931 - octoprint.plugins.tracking - INFO - Sent tracking event print_cancelled, payload: {'origin': u'local', 'file': 'a98961362d6143aecfbde25f7c2cd56edbf8c530', u'elapsed': 197} 2019-12-15 07:09:58,985 - octoprint.plugins.tracking - INFO - Sent tracking event print_failed, payload: {'origin': u'local', u'reason': u'cancelled', 'file': 'a98961362d6143aecfbde25f7c2cd56edbf8c530', u'elapsed': 197} 2019-12-15 07:10:01,165 - octoprint.util.comm - INFO - Changing monitoring state from "Cancelling" to "Operational" 2019-12-15 07:10:35,347 - octoprint.plugins.pluginmanager - INFO - Installing plugin from https://github.com/Booli/OctoPrint-ActionTriggerPlugin/archive/master.zip 2019-12-15 07:10:52,171 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2019-12-15 07:10:53,056 - octoprint.plugin.core - INFO - Found 40 plugin(s) providing 38 mixin implementations, 76 hook handlers 2019-12-15 07:10:53,065 - octoprint.plugin.core - INFO - 40 plugin(s) registered with the system: | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/action_command_prompt | !Action Trigger (0.1) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_actiontrigger | Announcement Plugin (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/appkeys | Autoscroll (0.0.2) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_autoscroll | Backup & Restore (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/backup | Bed Visualizer (0.1.11) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_bedlevelvisualizer | BetterHeaterTimeout (1.2.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_BetterHeaterTimeout | Cancel Objects (0.3.3) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_cancelobject | Change Filament Plugin (0.3.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_Change_Filament | CommandSplitter (0.1.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_commandsplitter | Consolidate Temp Control (0.1.3) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_consolidate_temp_control | Core Wizard (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/corewizard | Cost Estimation (2.1.3) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_costestimation | Custom Control Editor (0.2.1) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_customControl | Discovery (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/discovery | DisplayLayerProgress Plugin (1.14.2) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_DisplayLayerProgress | Error Tracking (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/errortracking | Filament Manager (0.5.3) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_filamentmanager | Firmware Updater (1.6.1) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_firmwareupdater | Floating Navbar (0.3.1) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_floatingnavbar | Logging (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/logging | M73-Progress-Plugin (0.1.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_m73progress | Octolapse (0.4.0rc1.dev2) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_octolapse | Pi Support Plugin (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/pluginmanager | PortLister (0.1.8) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_portlister | Preheat Button (0.4.1) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_preheat | Print Track (1.0.2) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_printtrack | Printer Safety Check (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/printer_safety_check | Printer Stats (2.0.2) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_stats | PrintTimeGenius Plugin (2.1) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_PrintTimeGenius | Resource Monitor (0.1.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_resource_monitor | Shutdown Printer (1.0.8) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_shutdownprinter | Software Update (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/softwareupdate | Tasmota (0.8.8) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_tasmota | The Spaghetti Detective (1.0.5) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_thespaghettidetective | Themeify (1.2.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_themeify | Virtual Printer (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2019-12-15 07:10:53,066 - octoprint.plugins.pluginmanager - INFO - The plugin was installed successfully: Action Trigger, version 0.1 2019-12-15 07:10:53,916 - octoprint.plugins.tracking - INFO - Sent tracking event install_plugin, payload: {'plugin_version': '0.1', 'plugin': 'actiontrigger'} 2019-12-15 07:11:51,352 - octoprint.plugins.pluginmanager - INFO - Installing plugin from https://github.com/benlye/OctoPrint-ActionCommandsPlugin/archive/master.zip 2019-12-15 07:12:07,312 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2019-12-15 07:12:08,233 - octoprint.plugin.core - INFO - Found 41 plugin(s) providing 38 mixin implementations, 76 hook handlers 2019-12-15 07:12:08,241 - octoprint.plugin.core - INFO - 41 plugin(s) registered with the system: | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/action_command_prompt | !Action Commands (0.1) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_actioncommands | !Action Trigger (0.1) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_actiontrigger | Announcement Plugin (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/appkeys | Autoscroll (0.0.2) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_autoscroll | Backup & Restore (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/backup | Bed Visualizer (0.1.11) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_bedlevelvisualizer | BetterHeaterTimeout (1.2.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_BetterHeaterTimeout | Cancel Objects (0.3.3) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_cancelobject | Change Filament Plugin (0.3.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_Change_Filament | CommandSplitter (0.1.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_commandsplitter | Consolidate Temp Control (0.1.3) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_consolidate_temp_control | Core Wizard (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/corewizard | Cost Estimation (2.1.3) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_costestimation | Custom Control Editor (0.2.1) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_customControl | Discovery (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/discovery | DisplayLayerProgress Plugin (1.14.2) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_DisplayLayerProgress | Error Tracking (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/errortracking | Filament Manager (0.5.3) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_filamentmanager | Firmware Updater (1.6.1) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_firmwareupdater | Floating Navbar (0.3.1) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_floatingnavbar | Logging (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/logging | M73-Progress-Plugin (0.1.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_m73progress | Octolapse (0.4.0rc1.dev2) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_octolapse | Pi Support Plugin (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/pluginmanager | PortLister (0.1.8) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_portlister | Preheat Button (0.4.1) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_preheat | Print Track (1.0.2) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_printtrack | Printer Safety Check (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/printer_safety_check | Printer Stats (2.0.2) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_stats | PrintTimeGenius Plugin (2.1) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_PrintTimeGenius | Resource Monitor (0.1.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_resource_monitor | Shutdown Printer (1.0.8) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_shutdownprinter | Software Update (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/softwareupdate | Tasmota (0.8.8) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_tasmota | The Spaghetti Detective (1.0.5) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_thespaghettidetective | Themeify (1.2.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_themeify | Virtual Printer (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2019-12-15 07:12:08,244 - octoprint.plugins.pluginmanager - INFO - The plugin was installed successfully: Action Commands, version 0.1 2019-12-15 07:12:09,034 - octoprint.plugins.tracking - INFO - Sent tracking event install_plugin, payload: {'plugin_version': '0.1', 'plugin': 'actioncommands'} 2019-12-15 07:13:01,450 - octoprint.server.api.system - INFO - Performing command for core:restart: sudo service octoprint restart 2019-12-15 07:13:35,981 - octoprint.startup - INFO - ****************************************************************************** 2019-12-15 07:13:35,983 - octoprint.startup - INFO - Starting OctoPrint 1.4.0rc3 2019-12-15 07:13:35,984 - octoprint.startup - INFO - ****************************************************************************** 2019-12-15 07:13:36,060 - octoprint.util.connectivity_checker - INFO - Connectivity changed from offline to online 2019-12-15 07:13:36,776 - octoprint.startup - INFO - Blacklist processing done, adding 1 blacklisted plugin versions: roomtemp (any) 2019-12-15 07:13:36,826 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2019-12-15 07:13:38,733 - py.warnings - WARNING - /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_preheat/__init__.py:4: ExtDeprecationWarning: Importing flask.ext.login is deprecated, use flask_login instead. from flask.ext.login import current_user 2019-12-15 07:13:41,403 - octoprint.plugins.errortracking - INFO - Initialized error tracking 2019-12-15 07:13:41,413 - octoprint.startup - INFO - Added settings overlay from plugin consolidate_temp_control 2019-12-15 07:13:41,423 - octoprint.plugin.core - INFO - Found 41 plugin(s) providing 40 mixin implementations, 79 hook handlers 2019-12-15 07:13:42,343 - octoprint.server.heartbeat - INFO - Starting server heartbeat, 900.0s interval 2019-12-15 07:13:42,376 - octoprint.server - INFO - Intermediary server started 2019-12-15 07:13:42,377 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2019-12-15 07:13:43,221 - octoprint.plugin.core - INFO - Found 41 plugin(s) providing 40 mixin implementations, 79 hook handlers 2019-12-15 07:13:43,262 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/pi/.octoprint/uploads... 2019-12-15 07:13:43,960 - octoprint.filemanager.storage - INFO - ... file metadata for /home/pi/.octoprint/uploads initialized successfully. 2019-12-15 07:13:43,966 - octoprint.server - INFO - Added new permission from plugin action_command_prompt: PLUGIN_ACTION_COMMAND_PROMPT_INTERACT (needs: u"Need(method='role', value=u'plugin_action_command_prompt_interact')") 2019-12-15 07:13:43,969 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_READ (needs: u"Need(method='role', value=u'plugin_announcements_read')") 2019-12-15 07:13:43,971 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_MANAGE (needs: u"Need(method='role', value=u'plugin_announcements_manage'), Need(method='role', value=u'plugin_announcements_read')") 2019-12-15 07:13:43,973 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_ADMIN (needs: u"Need(method='role', value=u'plugin_appkeys_admin')") 2019-12-15 07:13:43,974 - octoprint.server - INFO - Added new permission from plugin backup: PLUGIN_BACKUP_ACCESS (needs: u"Need(method='role', value=u'plugin_backup_access')") 2019-12-15 07:13:43,976 - octoprint.server - INFO - Added new permission from plugin logging: PLUGIN_LOGGING_MANAGE (needs: u"Need(method='role', value=u'plugin_logging_manage')") 2019-12-15 07:13:43,978 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_MANAGE (needs: u"Need(method='role', value=u'plugin_pluginmanager_manage')") 2019-12-15 07:13:43,981 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_INSTALL (needs: u"Need(method='role', value=u'plugin_pluginmanager_install'), Need(method='role', value=u'plugin_pluginmanager_manage')") 2019-12-15 07:13:43,982 - octoprint.server - INFO - Added new permission from plugin printer_safety_check: PLUGIN_PRINTER_SAFETY_CHECK_DISPLAY (needs: u"Need(method='role', value=u'plugin_printer_safety_check_display')") 2019-12-15 07:13:43,983 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CHECK (needs: u"Need(method='role', value=u'plugin_softwareupdate_check')") 2019-12-15 07:13:43,985 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_UPDATE (needs: u"Need(method='role', value=u'plugin_softwareupdate_update')") 2019-12-15 07:13:44,011 - octoprint.printer.standard - INFO - Using print time estimator provided by PrintTimeGenius 2019-12-15 07:13:44,051 - octoprint.plugins.cancelobject - INFO - No aftergcode defined 2019-12-15 07:13:44,538 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk 2019-12-15 07:13:46,416 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python2 -m pip" as command to invoke pip 2019-12-15 07:13:48,136 - octoprint.util.pip - INFO - Version of pip is 19.0.1 2019-12-15 07:13:48,138 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python2.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2019-12-15 07:13:48,140 - octoprint.util.pip - INFO - ==> pip ok -> yes 2019-12-15 07:13:48,147 - octoprint.plugin.core - INFO - Initialized 40 plugin implementation(s) 2019-12-15 07:13:48,208 - octoprint.plugin.core - INFO - 41 plugin(s) registered with the system: | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/action_command_prompt | Action Commands (0.1) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_actioncommands | Action Trigger (0.1) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_actiontrigger | Announcement Plugin (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/appkeys | Autoscroll (0.0.2) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_autoscroll | Backup & Restore (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/backup | Bed Visualizer (0.1.11) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_bedlevelvisualizer | BetterHeaterTimeout (1.2.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_BetterHeaterTimeout | Cancel Objects (0.3.3) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_cancelobject | Change Filament Plugin (0.3.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_Change_Filament | CommandSplitter (0.1.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_commandsplitter | Consolidate Temp Control (0.1.3) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_consolidate_temp_control | Core Wizard (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/corewizard | Cost Estimation (2.1.3) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_costestimation | Custom Control Editor (0.2.1) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_customControl | Discovery (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/discovery | DisplayLayerProgress Plugin (1.14.2) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_DisplayLayerProgress | Error Tracking (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/errortracking | Filament Manager (0.5.3) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_filamentmanager | Firmware Updater (1.6.1) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_firmwareupdater | Floating Navbar (0.3.1) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_floatingnavbar | Logging (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/logging | M73-Progress-Plugin (0.1.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_m73progress | Octolapse (0.4.0rc1.dev2) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_octolapse | Pi Support Plugin (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/pluginmanager | PortLister (0.1.8) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_portlister | Preheat Button (0.4.1) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_preheat | Print Track (1.0.2) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_printtrack | Printer Safety Check (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/printer_safety_check | Printer Stats (2.0.2) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_stats | PrintTimeGenius Plugin (2.1) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_PrintTimeGenius | Resource Monitor (0.1.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_resource_monitor | Shutdown Printer (1.0.8) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_shutdownprinter | Software Update (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/softwareupdate | Tasmota (0.8.8) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_tasmota | The Spaghetti Detective (1.0.5) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_thespaghettidetective | Themeify (1.2.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_themeify | Virtual Printer (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2019-12-15 07:13:48,227 - octoprint.environment - INFO - Detected environment is Python 2.7.13 under Linux (linux2). Details: | hardware: | cores: 4 | freq: 1400.0 | ram: 906604544 | os: | id: linux | platform: linux2 | plugins: | pi_support: | model: Raspberry Pi 3 Model B Plus Rev 1.3 | octopi_version: 0.16.0 | python: | pip: 19.0.1 | version: 2.7.13 | virtualenv: /home/pi/oprint 2019-12-15 07:13:48,244 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/webassets... 2019-12-15 07:13:48,276 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-cache... 2019-12-15 07:13:50,340 - octoprint.server - INFO - Shutting down intermediary server... 2019-12-15 07:13:50,807 - octoprint.server - INFO - Intermediary server shut down 2019-12-15 07:13:50,812 - octoprint.events - INFO - Processing startup event, this is our first event 2019-12-15 07:13:50,813 - octoprint.events - INFO - Adding 1 events to queue that were held back before startup event 2019-12-15 07:13:50,826 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue... 2019-12-15 07:13:50,828 - octoprint.server - INFO - Autoconnect on startup is configured, trying to connect to the printer... 2019-12-15 07:13:50,850 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2019-12-15 07:13:51,261 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue 2019-12-15 07:13:52,474 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2019-12-15 07:13:52,605 - octoprint.server - INFO - Trying to connect to configured serial port None 2019-12-15 07:13:52,820 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial port" 2019-12-15 07:13:52,915 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder... 2019-12-15 07:13:52,918 - octoprint.server.util.watchdog - INFO - ... initial scan done. 2019-12-15 07:13:53,054 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial port" to "Opening serial port" 2019-12-15 07:13:53,067 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial port" to "Connecting" 2019-12-15 07:13:53,082 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2019-12-15 07:13:53,106 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2019-12-15 07:13:53,136 - octoprint.util.comm - INFO - Changing monitoring state from "Connecting" to "Operational" 2019-12-15 07:13:53,148 - octoprint.plugins.firmwareupdater - INFO - Got CONNECTED event 2019-12-15 07:13:53,156 - octoprint.plugins.firmwareupdater - INFO - Run postflash flag is not set 2019-12-15 07:13:53,171 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 07:13:53,196 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2019-12-15 07:13:53,211 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin 2.0.x (GitHub)" 2019-12-15 07:13:53,230 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting 2019-12-15 07:13:53,258 - octoprint.util.comm - INFO - Firmware states that it supports emergency GCODEs to be sent without waiting for an acknowledgement first 2019-12-15 07:13:54,149 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {u'printer_baudrate': 250000, u'printer_port': None, 'firmware_name': u'Marlin 2.0.x (GitHub)'} 2019-12-15 07:13:54,231 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on octopi' for _http._tcp 2019-12-15 07:13:54,250 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on octopi' for _octoprint._tcp 2019-12-15 07:13:54,307 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python2 -m pip" as command to invoke pip 2019-12-15 07:13:54,341 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance on octopi for SSDP 2019-12-15 07:13:59,361 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python2.7/site-packages/ (writable -> yes), --user flag needed -> no, virtual env -> yes 2019-12-15 07:13:59,362 - octoprint.util.pip - INFO - ==> pip ok -> yes 2019-12-15 07:13:59,675 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk 2019-12-15 07:13:59,772 - octoprint.server - INFO - Listening on http://127.0.0.1:5000 2019-12-15 07:14:00,026 - octoprint.server.util.sockjs - INFO - New connection from client: 192.168.1.121 2019-12-15 07:14:00,079 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2019-12-15 07:14:01,031 - octoprint.server.util.flask - INFO - Passively logging in user NovaViper from 192.168.1.121 2019-12-15 07:14:01,340 - octoprint.server.util.sockjs - INFO - User NovaViper logged in on the socket from client 192.168.1.121 2019-12-15 07:14:02,084 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python2 -m pip" as command to invoke pip 2019-12-15 07:14:02,087 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python2.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2019-12-15 07:14:02,087 - octoprint.util.pip - INFO - ==> pip ok -> yes 2019-12-15 07:14:02,177 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2019-12-15 07:14:02,487 - octoprint.plugins.bedlevelvisualizer - INFO - OctoPrint-BedLevelVisualizer loaded! 2019-12-15 07:14:02,513 - octoprint.plugins.portlister - INFO - Port Lister () {} 2019-12-15 07:14:02,584 - octoprint.plugins.stats - INFO - Printer Stats 2019-12-15 07:14:02,591 - octoprint.plugins.tasmota - INFO - Tasmota loaded! 2019-12-15 07:14:02,593 - octoprint.plugins.themeify - INFO - Themeify initialized. 2019-12-15 07:14:03,428 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 24} 2019-12-15 07:14:04,034 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'query_string': 'l10n=en', 'path': '/', 'base_url': 'http://192.168.1.130/'} 2019-12-15 07:14:04,427 - octoprint.plugins.tracking - INFO - Sent tracking event startup, payload: {'python': '2.7.13', 'ram': 906604544, u'octopi_version': u'0.16.0', 'version': u'1.4.0rc3', 'pip': '19.0.1', 'cores': 4, 'freq': 1400.0, u'pi_model': u'Raspberry Pi 3 Model B Plus Rev 1.3', 'os': 'linux'} 2019-12-15 07:14:04,516 - octoprint.plugins.thespaghettidetective - INFO - User account: {u'is_pro': False} 2019-12-15 07:14:05,700 - octoprint.plugins.tracking - INFO - Sent tracking event pong, payload: {'plugins': u'displaylayerprogress:1.14.2,commandsplitter:0.1.0,firmwareupdater:1.6.1,tasmota:0.8.8,betterheatertimeout:1.2.0,stats:2.0.2,actioncommands:0.1,cancelobject:0.3.3,customcontrol:0.2.1,resource_monitor:0.1.0,m73progress:0.1.0,costestimation:2.1.3,themeify:1.2.0,autoscroll:0.0.2,consolidate_temp_control:0.1.3,shutdownprinter:1.0.8,portlister:0.1.8,actiontrigger:0.1,printtrack:1.0.2,thespaghettidetective:1.0.5,filamentmanager:0.5.3,change_filament:0.3.0,octolapse:0.4.0rc1.dev2,bedlevelvisualizer:0.1.11,floatingnavbar:0.3.1,printtimegenius:2.1,preheat:0.4.1'} 2019-12-15 07:14:28,309 - octoprint.server.preemptive_cache - INFO - ... done in 24.28s 2019-12-15 07:14:28,313 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'query_string': 'l10n=en', 'path': '/', 'base_url': 'http://1bcc8f82.ngrok.io/'} 2019-12-15 07:14:36,478 - octoprint.server.preemptive_cache - INFO - ... done in 8.17s 2019-12-15 07:14:36,480 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'query_string': 'l10n=en', 'path': '/', 'base_url': 'https://6627eff4.ngrok.io/'} 2019-12-15 07:14:44,952 - octoprint.server.preemptive_cache - INFO - ... done in 8.47s 2019-12-15 07:16:28,442 - octoprint.server.util.sockjs - INFO - Client connection closed: 192.168.1.121 2019-12-15 07:16:31,763 - octoprint.server.util.sockjs - INFO - New connection from client: 192.168.1.121 2019-12-15 07:16:32,162 - octoprint.server.util.flask - INFO - Passively logging in user NovaViper from 192.168.1.121 2019-12-15 07:16:52,516 - octoprint.server.util.sockjs - INFO - User NovaViper logged in on the socket from client 192.168.1.121 2019-12-15 07:20:34,545 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_end' 2019-12-15 07:20:34,546 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_end' 2019-12-15 07:20:34,599 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_begin Pause' 2019-12-15 07:20:34,600 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_begin Pause' 2019-12-15 07:20:34,650 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_button Dismiss' 2019-12-15 07:20:34,652 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_button Dismiss' 2019-12-15 07:20:34,705 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_show' 2019-12-15 07:20:34,706 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_show' 2019-12-15 07:20:36,542 - octoprint.util.comm - INFO - Printer seems to support the busy protocol, will adjust timeouts and set busy interval accordingly 2019-12-15 07:20:37,431 - octoprint.util.comm - INFO - Force-sending M876 to the printer 2019-12-15 07:20:40,410 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_end' 2019-12-15 07:20:40,416 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_end' 2019-12-15 07:20:40,471 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_begin Nozzle Parked' 2019-12-15 07:20:40,473 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_begin Nozzle Parked' 2019-12-15 07:20:40,528 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_button Continue' 2019-12-15 07:20:40,529 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_button Continue' 2019-12-15 07:20:40,590 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_show' 2019-12-15 07:20:40,592 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_show' 2019-12-15 07:20:42,196 - octoprint.util.comm - INFO - Force-sending M876 to the printer 2019-12-15 07:20:48,061 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_end' 2019-12-15 07:20:48,062 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_end' 2019-12-15 07:20:48,124 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_begin Resuming' 2019-12-15 07:20:48,124 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_begin Resuming' 2019-12-15 07:20:48,184 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_button Dismiss' 2019-12-15 07:20:48,185 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_button Dismiss' 2019-12-15 07:20:48,261 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_show' 2019-12-15 07:20:48,262 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_show' 2019-12-15 07:20:48,327 - octoprint.plugins.actioncommands - INFO - Command received: 'action:notification Printing...' 2019-12-15 07:20:48,329 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:notification Printing...' 2019-12-15 07:20:48,402 - octoprint.util.comm - INFO - Telling the printer to set the busy interval to our "communicationBusy" timeout - 1s = 2s 2019-12-15 07:20:50,517 - octoprint.util.comm - INFO - Force-sending M876 to the printer 2019-12-15 07:21:37,217 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_end' 2019-12-15 07:21:37,220 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_end' 2019-12-15 07:21:37,357 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_begin Pause' 2019-12-15 07:21:37,358 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_begin Pause' 2019-12-15 07:21:37,446 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_button Dismiss' 2019-12-15 07:21:37,447 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_button Dismiss' 2019-12-15 07:21:37,532 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_show' 2019-12-15 07:21:37,535 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_show' 2019-12-15 07:21:41,144 - octoprint.util.comm - INFO - Force-sending M876 to the printer 2019-12-15 07:21:43,068 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_end' 2019-12-15 07:21:43,069 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_end' 2019-12-15 07:21:43,153 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_begin Nozzle Parked' 2019-12-15 07:21:43,156 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_begin Nozzle Parked' 2019-12-15 07:21:43,237 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_button Continue' 2019-12-15 07:21:43,238 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_button Continue' 2019-12-15 07:21:43,330 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_show' 2019-12-15 07:21:43,331 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_show' 2019-12-15 07:21:45,995 - octoprint.util.comm - INFO - Force-sending M876 to the printer 2019-12-15 07:21:51,878 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_end' 2019-12-15 07:21:51,879 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_end' 2019-12-15 07:21:51,955 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_begin Resuming' 2019-12-15 07:21:51,957 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_begin Resuming' 2019-12-15 07:21:52,039 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_button Dismiss' 2019-12-15 07:21:52,042 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_button Dismiss' 2019-12-15 07:21:52,122 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_show' 2019-12-15 07:21:52,126 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_show' 2019-12-15 07:21:52,207 - octoprint.plugins.actioncommands - INFO - Command received: 'action:notification Printing...' 2019-12-15 07:21:52,210 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:notification Printing...' 2019-12-15 07:21:54,052 - octoprint.util.comm - INFO - Force-sending M876 to the printer 2019-12-15 07:21:56,755 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_end' 2019-12-15 07:21:56,757 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_end' 2019-12-15 07:21:56,844 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_begin Pause' 2019-12-15 07:21:56,847 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_begin Pause' 2019-12-15 07:21:56,929 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_button Dismiss' 2019-12-15 07:21:56,932 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_button Dismiss' 2019-12-15 07:21:57,013 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_show' 2019-12-15 07:21:57,014 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_show' 2019-12-15 07:22:02,630 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_end' 2019-12-15 07:22:02,633 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_end' 2019-12-15 07:22:02,716 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_begin Nozzle Parked' 2019-12-15 07:22:02,717 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_begin Nozzle Parked' 2019-12-15 07:22:02,800 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_button Continue' 2019-12-15 07:22:02,800 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_button Continue' 2019-12-15 07:22:02,886 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_show' 2019-12-15 07:22:02,888 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_show' 2019-12-15 07:22:05,234 - octoprint.util.comm - INFO - Force-sending M876 to the printer 2019-12-15 07:22:11,102 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_end' 2019-12-15 07:22:11,104 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_end' 2019-12-15 07:22:11,187 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_begin Resuming' 2019-12-15 07:22:11,188 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_begin Resuming' 2019-12-15 07:22:11,271 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_button Dismiss' 2019-12-15 07:22:11,272 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_button Dismiss' 2019-12-15 07:22:11,367 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_show' 2019-12-15 07:22:11,368 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_show' 2019-12-15 07:22:11,453 - octoprint.plugins.actioncommands - INFO - Command received: 'action:notification Printing...' 2019-12-15 07:22:11,454 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:notification Printing...' 2019-12-15 07:22:27,586 - octoprint.util.comm - INFO - Force-sending M876 to the printer 2019-12-15 07:25:57,960 - octoprint.plugins.actioncommands - INFO - Add command definition 'action:' = 2019-12-15 07:26:03,205 - octoprint.plugins.actioncommands - INFO - Command received: 'action:notification Printing...' 2019-12-15 07:26:03,206 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:notification Printing...' 2019-12-15 07:26:26,229 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_end' 2019-12-15 07:26:26,233 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_end' 2019-12-15 07:26:26,327 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_begin Pause' 2019-12-15 07:26:26,328 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_begin Pause' 2019-12-15 07:26:26,427 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_button Dismiss' 2019-12-15 07:26:26,428 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_button Dismiss' 2019-12-15 07:26:26,560 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_show' 2019-12-15 07:26:26,565 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_show' 2019-12-15 07:26:28,552 - octoprint.util.comm - INFO - Force-sending M876 to the printer 2019-12-15 07:26:32,349 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_end' 2019-12-15 07:26:32,352 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_end' 2019-12-15 07:26:32,458 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_begin Nozzle Parked' 2019-12-15 07:26:32,460 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_begin Nozzle Parked' 2019-12-15 07:26:32,557 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_button Continue' 2019-12-15 07:26:32,560 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_button Continue' 2019-12-15 07:26:32,666 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_show' 2019-12-15 07:26:32,668 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_show' 2019-12-15 07:26:45,447 - octoprint.util.comm - INFO - Force-sending M876 to the printer 2019-12-15 07:26:51,315 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_end' 2019-12-15 07:26:51,317 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_end' 2019-12-15 07:26:51,398 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_begin Resuming' 2019-12-15 07:26:51,400 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_begin Resuming' 2019-12-15 07:26:51,480 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_button Dismiss' 2019-12-15 07:26:51,482 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_button Dismiss' 2019-12-15 07:26:51,565 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_show' 2019-12-15 07:26:51,566 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_show' 2019-12-15 07:26:51,664 - octoprint.plugins.actioncommands - INFO - Command received: 'action:notification Printing...' 2019-12-15 07:26:51,665 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:notification Printing...' 2019-12-15 07:26:51,840 - octoprint.plugins.actioncommands - INFO - Command received: 'action:notification Printing...' 2019-12-15 07:26:51,842 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:notification Printing...' 2019-12-15 07:27:23,414 - octoprint.util.comm - INFO - Force-sending M876 to the printer 2019-12-15 07:28:23,188 - octoprint.printer.standard.job - INFO - Print job selected - origin: local, path: OctolaspeTests/hollow_cube_PLA0.32mm_0.4n_Ender3_3m.gcode, owner: NovaViper, user: NovaViper 2019-12-15 07:28:23,196 - octoprint.plugins.DisplayLayerProgress - INFO - File selected. Determining number of layers. 2019-12-15 07:28:23,215 - octoprint.plugin - ERROR - Error while calling plugin DisplayLayerProgress Traceback (most recent call last): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/plugin/__init__.py", line 224, in call_plugin result = getattr(plugin, method)(*args, **kwargs) File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_DisplayLayerProgress/__init__.py", line 344, in on_event with open(selectedFile, "r") as f: IOError: [Errno 2] No such file or directory: '' 2019-12-15 07:28:23,339 - octoprint.plugin - ERROR - Error while calling plugin cancelobject Traceback (most recent call last): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/plugin/__init__.py", line 224, in call_plugin result = getattr(plugin, method)(*args, **kwargs) File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_cancelobject/__init__.py", line 250, in on_event with open(selectedFile, "r") as f: IOError: [Errno 2] No such file or directory: '' 2019-12-15 07:28:42,380 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2019-12-15 07:29:04,227 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 924} 2019-12-15 07:29:33,984 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting" 2019-12-15 07:29:33,998 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: OctolaspeTests/hollow_cube_PLA0.32mm_0.4n_Ender3_3m.gcode, owner: NovaViper, user: NovaViper 2019-12-15 07:29:34,077 - octoprint.plugins.DisplayLayerProgress - INFO - Printing started. Detailed progress started.{'origin': u'local', 'name': u'hollow_cube_PLA0.32mm_0.4n_Ender3_3m.gcode', u'user': 'NovaViper', u'owner': 'NovaViper', 'path': u'OctolaspeTests/hollow_cube_PLA0.32mm_0.4n_Ender3_3m.gcode', 'size': 55676L} 2019-12-15 07:29:34,098 - octoprint.plugin - ERROR - Error while calling plugin cancelobject Traceback (most recent call last): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/plugin/__init__.py", line 224, in call_plugin result = getattr(plugin, method)(*args, **kwargs) File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_cancelobject/__init__.py", line 250, in on_event with open(selectedFile, "r") as f: IOError: [Errno 2] No such file or directory: '' 2019-12-15 07:29:34,297 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Printing" 2019-12-15 07:29:34,313 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 07:29:34,320 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2019-12-15 07:29:34,982 - octoprint.plugins.actioncommands - INFO - Command received: 'action:notification Heating...' 2019-12-15 07:29:34,983 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:notification Heating...' 2019-12-15 07:29:35,083 - octoprint.plugins.tracking - INFO - Sent tracking event print_started, payload: {'origin': u'local', 'file': 'a98961362d6143aecfbde25f7c2cd56edbf8c530'} 2019-12-15 07:29:42,222 - octoprint.plugins.actioncommands - INFO - Command received: 'action:notification Leveling Bed...' 2019-12-15 07:29:42,224 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:notification Leveling Bed...' 2019-12-15 07:30:00,168 - octoprint.plugins.actioncommands - INFO - Command received: 'action:notification Doing G29' 2019-12-15 07:30:00,169 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:notification Doing G29' 2019-12-15 07:30:00,258 - octoprint.plugins.actioncommands - INFO - Command received: 'action:notification Printing...' 2019-12-15 07:30:00,259 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:notification Printing...' 2019-12-15 07:30:00,448 - octoprint.plugins.actioncommands - INFO - Command received: 'action:notification Doing G29' 2019-12-15 07:30:00,450 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:notification Doing G29' 2019-12-15 07:30:16,875 - octoprint.plugins.actioncommands - INFO - Command received: 'action:notification Printing...' 2019-12-15 07:30:16,877 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:notification Printing...' 2019-12-15 07:30:17,114 - octoprint.plugins.cancelobject - INFO - Tracking Extrusion 2019-12-15 07:30:17,177 - octoprint.plugins.actioncommands - INFO - Command received: 'action:notification Priming Nozzle...' 2019-12-15 07:30:17,178 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:notification Priming Nozzle...' 2019-12-15 07:30:17,430 - octoprint.plugins.cancelobject - INFO - Not Tracking Extrusion 2019-12-15 07:30:19,829 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Pausing" 2019-12-15 07:30:19,846 - octoprint.plugins.filamentmanager - INFO - Filament used: 0.0 mm (tool0) 2019-12-15 07:30:32,076 - octoprint.plugins.cancelobject - INFO - Tracking Extrusion 2019-12-15 07:30:32,971 - octoprint.printer.standard.job - INFO - Print job paused - origin: local, path: OctolaspeTests/hollow_cube_PLA0.32mm_0.4n_Ender3_3m.gcode, owner: NovaViper, user: NovaViper 2019-12-15 07:30:32,978 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 07:30:33,094 - octoprint.util.comm - INFO - Pausing print job due to command M25 2019-12-15 07:30:33,253 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_end' 2019-12-15 07:30:33,256 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_end' 2019-12-15 07:30:33,366 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_begin Pause' 2019-12-15 07:30:33,368 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_begin Pause' 2019-12-15 07:30:33,449 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_button Dismiss' 2019-12-15 07:30:33,451 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_button Dismiss' 2019-12-15 07:30:33,541 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_show' 2019-12-15 07:30:33,542 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_show' 2019-12-15 07:30:37,684 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_end' 2019-12-15 07:30:37,689 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_end' 2019-12-15 07:30:37,771 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_begin Nozzle Parked' 2019-12-15 07:30:37,773 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_begin Nozzle Parked' 2019-12-15 07:30:37,855 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_button Continue' 2019-12-15 07:30:37,858 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_button Continue' 2019-12-15 07:30:37,943 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_show' 2019-12-15 07:30:37,945 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_show' 2019-12-15 07:31:01,192 - octoprint.server.util.sockjs - INFO - Client connection closed: 192.168.1.121 2019-12-15 07:31:02,420 - octoprint.server.util.sockjs - INFO - New connection from client: 192.168.1.121 2019-12-15 07:31:02,876 - octoprint.server.util.flask - INFO - Passively logging in user NovaViper from 192.168.1.121 2019-12-15 07:31:11,860 - octoprint.util.comm - INFO - Changing monitoring state from "Pausing" to "Resuming" 2019-12-15 07:31:11,872 - octoprint.printer.standard.job - INFO - Print job resumed - origin: local, path: OctolaspeTests/hollow_cube_PLA0.32mm_0.4n_Ender3_3m.gcode, owner: NovaViper, user: None 2019-12-15 07:31:11,879 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 07:31:11,880 - octoprint.plugin - ERROR - Error while calling plugin stats Traceback (most recent call last): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/plugin/__init__.py", line 224, in call_plugin result = getattr(plugin, method)(*args, **kwargs) File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_stats/__init__.py", line 966, in on_event user = payload["user"] KeyError: 'user' 2019-12-15 07:31:11,882 - octoprint.util.comm - INFO - Force-sending M876 to the printer 2019-12-15 07:31:11,958 - octoprint.plugins.actioncommands - INFO - Command received: 'action:notification Printing...' 2019-12-15 07:31:11,967 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:notification Printing...' 2019-12-15 07:31:12,066 - octoprint.util.comm - INFO - Changing monitoring state from "Resuming" to "Printing" 2019-12-15 07:31:12,164 - octoprint.plugins.actioncommands - INFO - Command received: 'action:notification Printing...' 2019-12-15 07:31:12,166 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:notification Printing...' 2019-12-15 07:31:12,273 - octoprint.plugins.cancelobject - INFO - Not Tracking Extrusion 2019-12-15 07:31:21,728 - octoprint.server.util.sockjs - INFO - User NovaViper logged in on the socket from client 192.168.1.121 2019-12-15 07:31:25,286 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Pausing" 2019-12-15 07:31:25,294 - octoprint.plugins.filamentmanager - INFO - Filament used: 0.0 mm (tool0) 2019-12-15 07:31:28,426 - octoprint.printer.standard.job - INFO - Print job paused - origin: local, path: OctolaspeTests/hollow_cube_PLA0.32mm_0.4n_Ender3_3m.gcode, owner: NovaViper, user: NovaViper 2019-12-15 07:31:28,434 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 07:31:28,445 - octoprint.util.comm - INFO - Pausing print job due to command M25 2019-12-15 07:31:28,578 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_end' 2019-12-15 07:31:28,580 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_end' 2019-12-15 07:31:28,744 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_begin Pause' 2019-12-15 07:31:28,745 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_begin Pause' 2019-12-15 07:31:29,005 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_button Dismiss' 2019-12-15 07:31:29,072 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_button Dismiss' 2019-12-15 07:31:29,376 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_show' 2019-12-15 07:31:29,378 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_show' 2019-12-15 07:31:34,450 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_end' 2019-12-15 07:31:34,451 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_end' 2019-12-15 07:31:34,534 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_begin Nozzle Parked' 2019-12-15 07:31:34,536 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_begin Nozzle Parked' 2019-12-15 07:31:34,617 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_button Continue' 2019-12-15 07:31:34,619 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_button Continue' 2019-12-15 07:31:34,703 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_show' 2019-12-15 07:31:34,704 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_show' 2019-12-15 07:32:07,951 - octoprint.util.comm - INFO - Changing monitoring state from "Pausing" to "Resuming" 2019-12-15 07:32:07,972 - octoprint.printer.standard.job - INFO - Print job resumed - origin: local, path: OctolaspeTests/hollow_cube_PLA0.32mm_0.4n_Ender3_3m.gcode, owner: NovaViper, user: None 2019-12-15 07:32:07,977 - octoprint.util.comm - INFO - Force-sending M876 to the printer 2019-12-15 07:32:07,985 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 07:32:07,988 - octoprint.plugins.actioncommands - INFO - Command received: 'action:notification Printing...' 2019-12-15 07:32:07,991 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:notification Printing...' 2019-12-15 07:32:07,992 - octoprint.plugin - ERROR - Error while calling plugin stats Traceback (most recent call last): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/plugin/__init__.py", line 224, in call_plugin result = getattr(plugin, method)(*args, **kwargs) File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_stats/__init__.py", line 966, in on_event user = payload["user"] KeyError: 'user' 2019-12-15 07:32:08,129 - octoprint.util.comm - INFO - Changing monitoring state from "Resuming" to "Printing" 2019-12-15 07:32:34,887 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Pausing" 2019-12-15 07:32:34,896 - octoprint.plugins.filamentmanager - INFO - Filament used: 0.0 mm (tool0) 2019-12-15 07:32:34,911 - octoprint.printer.standard.job - INFO - Print job paused - origin: local, path: OctolaspeTests/hollow_cube_PLA0.32mm_0.4n_Ender3_3m.gcode, owner: NovaViper, user: None 2019-12-15 07:32:34,917 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_end' 2019-12-15 07:32:34,918 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_end' 2019-12-15 07:32:35,015 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_begin Pause' 2019-12-15 07:32:35,019 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_begin Pause' 2019-12-15 07:32:35,082 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 07:32:35,086 - octoprint.plugin - ERROR - Error while calling plugin stats Traceback (most recent call last): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/plugin/__init__.py", line 224, in call_plugin result = getattr(plugin, method)(*args, **kwargs) File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_stats/__init__.py", line 950, in on_event user = payload["user"] KeyError: 'user' 2019-12-15 07:32:35,117 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_button Dismiss' 2019-12-15 07:32:35,190 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_button Dismiss' 2019-12-15 07:32:35,299 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_show' 2019-12-15 07:32:35,304 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_show' 2019-12-15 07:32:42,569 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_end' 2019-12-15 07:32:42,583 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_end' 2019-12-15 07:32:42,678 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_begin Nozzle Parked' 2019-12-15 07:32:42,680 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_begin Nozzle Parked' 2019-12-15 07:32:42,764 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_button Continue' 2019-12-15 07:32:42,766 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_button Continue' 2019-12-15 07:32:42,850 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_show' 2019-12-15 07:32:42,852 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_show' 2019-12-15 07:33:13,987 - octoprint.util.comm - INFO - Changing monitoring state from "Pausing" to "Resuming" 2019-12-15 07:33:14,007 - octoprint.printer.standard.job - INFO - Print job resumed - origin: local, path: OctolaspeTests/hollow_cube_PLA0.32mm_0.4n_Ender3_3m.gcode, owner: NovaViper, user: None 2019-12-15 07:33:14,016 - octoprint.util.comm - INFO - Force-sending M876 to the printer 2019-12-15 07:33:14,019 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 07:33:14,024 - octoprint.plugin - ERROR - Error while calling plugin stats Traceback (most recent call last): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/plugin/__init__.py", line 224, in call_plugin result = getattr(plugin, method)(*args, **kwargs) File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_stats/__init__.py", line 966, in on_event user = payload["user"] KeyError: 'user' 2019-12-15 07:33:14,100 - octoprint.plugins.actioncommands - INFO - Command received: 'action:notification Printing...' 2019-12-15 07:33:14,101 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:notification Printing...' 2019-12-15 07:33:14,290 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_end' 2019-12-15 07:33:14,291 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_end' 2019-12-15 07:33:14,389 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_begin Resuming SD' 2019-12-15 07:33:14,390 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_begin Resuming SD' 2019-12-15 07:33:14,484 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_button Dismiss' 2019-12-15 07:33:14,486 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_button Dismiss' 2019-12-15 07:33:14,595 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_show' 2019-12-15 07:33:14,598 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_show' 2019-12-15 07:33:14,697 - octoprint.plugins.actioncommands - INFO - Command received: 'action:notification Printing...' 2019-12-15 07:33:14,698 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:notification Printing...' 2019-12-15 07:33:14,827 - octoprint.plugins.actioncommands - INFO - Command received: 'action:notification Printing...' 2019-12-15 07:33:14,829 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:notification Printing...' 2019-12-15 07:33:14,931 - octoprint.util.comm - INFO - Changing monitoring state from "Resuming" to "Printing" 2019-12-15 07:33:17,229 - octoprint.util.comm - INFO - Force-sending M876 to the printer 2019-12-15 07:33:56,047 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Cancelling" 2019-12-15 07:33:56,119 - octoprint.util.comm - INFO - Force-sending M108 to the printer 2019-12-15 07:33:56,122 - octoprint.util.comm - INFO - Force-sending M108 to the printer 2019-12-15 07:33:56,157 - octoprint.plugins.filamentmanager - INFO - Filament used: 0.0 mm (tool0) 2019-12-15 07:33:56,319 - octoprint.printer.standard.job - INFO - Print job cancelled - origin: local, path: OctolaspeTests/hollow_cube_PLA0.32mm_0.4n_Ender3_3m.gcode, owner: NovaViper, user: NovaViper 2019-12-15 07:33:56,447 - octoprint.util.comm - INFO - Changing monitoring state from "Cancelling" to "Operational" 2019-12-15 07:33:56,460 - octoprint.plugins.DisplayLayerProgress - INFO - Printing stopped. Detailed progress stopped. 2019-12-15 07:33:56,497 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 07:33:56,966 - octoprint.plugins.DisplayLayerProgress - INFO - Printing stopped. Detailed progress stopped. 2019-12-15 07:33:56,994 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 07:33:57,448 - octoprint.plugins.tracking - INFO - Sent tracking event print_cancelled, payload: {'origin': u'local', 'file': 'a98961362d6143aecfbde25f7c2cd56edbf8c530', u'elapsed': 128} 2019-12-15 07:33:58,541 - octoprint.plugins.tracking - INFO - Sent tracking event print_failed, payload: {'origin': u'local', u'reason': u'cancelled', 'file': 'a98961362d6143aecfbde25f7c2cd56edbf8c530', u'elapsed': 128} 2019-12-15 07:34:04,864 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_end' 2019-12-15 07:34:04,865 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_end' 2019-12-15 07:34:04,952 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_begin Pause' 2019-12-15 07:34:04,955 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_begin Pause' 2019-12-15 07:34:05,043 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_button Dismiss' 2019-12-15 07:34:05,044 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_button Dismiss' 2019-12-15 07:34:05,144 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_show' 2019-12-15 07:34:05,145 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_show' 2019-12-15 07:34:08,863 - octoprint.util.comm - INFO - Force-sending M876 to the printer 2019-12-15 07:34:10,701 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_end' 2019-12-15 07:34:10,707 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_end' 2019-12-15 07:34:10,836 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_begin Nozzle Parked' 2019-12-15 07:34:10,839 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_begin Nozzle Parked' 2019-12-15 07:34:10,937 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_button Continue' 2019-12-15 07:34:10,938 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_button Continue' 2019-12-15 07:34:11,024 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_show' 2019-12-15 07:34:11,025 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_show' 2019-12-15 07:34:12,647 - octoprint.util.comm - INFO - Force-sending M876 to the printer 2019-12-15 07:34:18,465 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_end' 2019-12-15 07:34:18,466 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_end' 2019-12-15 07:34:18,555 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_begin Resuming' 2019-12-15 07:34:18,556 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_begin Resuming' 2019-12-15 07:34:18,640 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_button Dismiss' 2019-12-15 07:34:18,641 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_button Dismiss' 2019-12-15 07:34:18,726 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_show' 2019-12-15 07:34:18,727 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_show' 2019-12-15 07:34:18,809 - octoprint.plugins.actioncommands - INFO - Command received: 'action:notification Printing...' 2019-12-15 07:34:18,827 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:notification Printing...' 2019-12-15 07:34:20,349 - octoprint.util.comm - INFO - Force-sending M876 to the printer 2019-12-15 07:34:32,053 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_end' 2019-12-15 07:34:32,056 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_end' 2019-12-15 07:34:32,137 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_begin Pause' 2019-12-15 07:34:32,140 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_begin Pause' 2019-12-15 07:34:32,218 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_button Dismiss' 2019-12-15 07:34:32,220 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_button Dismiss' 2019-12-15 07:34:32,304 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_show' 2019-12-15 07:34:32,306 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_show' 2019-12-15 07:34:37,865 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_end' 2019-12-15 07:34:37,867 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_end' 2019-12-15 07:34:37,946 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_begin Nozzle Parked' 2019-12-15 07:34:37,948 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_begin Nozzle Parked' 2019-12-15 07:34:38,029 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_button Continue' 2019-12-15 07:34:38,031 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_button Continue' 2019-12-15 07:34:38,111 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_show' 2019-12-15 07:34:38,113 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_show' 2019-12-15 07:34:42,883 - octoprint.util.comm - INFO - Force-sending M876 to the printer 2019-12-15 07:34:48,713 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_end' 2019-12-15 07:34:48,715 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_end' 2019-12-15 07:34:48,796 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_begin Resuming' 2019-12-15 07:34:48,798 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_begin Resuming' 2019-12-15 07:34:48,878 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_button Dismiss' 2019-12-15 07:34:48,881 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_button Dismiss' 2019-12-15 07:34:48,968 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_show' 2019-12-15 07:34:48,971 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_show' 2019-12-15 07:34:49,054 - octoprint.plugins.actioncommands - INFO - Command received: 'action:notification Printing...' 2019-12-15 07:34:49,055 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:notification Printing...' 2019-12-15 07:34:51,162 - octoprint.util.comm - INFO - Force-sending M876 to the printer 2019-12-15 07:38:19,367 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_end' 2019-12-15 07:38:19,369 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_end' 2019-12-15 07:38:19,451 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_begin Pause' 2019-12-15 07:38:19,453 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_begin Pause' 2019-12-15 07:38:19,537 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_button Dismiss' 2019-12-15 07:38:19,538 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_button Dismiss' 2019-12-15 07:38:19,628 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_show' 2019-12-15 07:38:19,634 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_show' 2019-12-15 07:38:22,669 - octoprint.util.comm - INFO - Force-sending M876 to the printer 2019-12-15 07:38:25,192 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_end' 2019-12-15 07:38:25,194 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_end' 2019-12-15 07:38:25,276 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_begin Nozzle Parked' 2019-12-15 07:38:25,278 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_begin Nozzle Parked' 2019-12-15 07:38:25,363 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_button Continue' 2019-12-15 07:38:25,365 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_button Continue' 2019-12-15 07:38:25,450 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_show' 2019-12-15 07:38:25,451 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_show' 2019-12-15 07:38:26,706 - octoprint.util.comm - INFO - Force-sending M876 to the printer 2019-12-15 07:38:32,535 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_end' 2019-12-15 07:38:32,538 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_end' 2019-12-15 07:38:32,630 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_begin Resuming' 2019-12-15 07:38:32,632 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_begin Resuming' 2019-12-15 07:38:32,715 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_button Dismiss' 2019-12-15 07:38:32,716 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_button Dismiss' 2019-12-15 07:38:32,803 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_show' 2019-12-15 07:38:32,804 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_show' 2019-12-15 07:38:32,894 - octoprint.plugins.actioncommands - INFO - Command received: 'action:notification Printing...' 2019-12-15 07:38:32,895 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:notification Printing...' 2019-12-15 07:38:35,308 - octoprint.util.comm - INFO - Force-sending M876 to the printer 2019-12-15 07:42:35,207 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting" 2019-12-15 07:42:35,223 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: OctolaspeTests/hollow_cube_PLA0.32mm_0.4n_Ender3_3m.gcode, owner: NovaViper, user: NovaViper 2019-12-15 07:42:35,312 - octoprint.plugins.DisplayLayerProgress - INFO - Printing started. Detailed progress started.{'origin': u'local', 'name': u'hollow_cube_PLA0.32mm_0.4n_Ender3_3m.gcode', u'user': 'NovaViper', u'owner': 'NovaViper', 'path': u'OctolaspeTests/hollow_cube_PLA0.32mm_0.4n_Ender3_3m.gcode', 'size': 55676L} 2019-12-15 07:42:35,330 - octoprint.plugin - ERROR - Error while calling plugin cancelobject Traceback (most recent call last): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/plugin/__init__.py", line 224, in call_plugin result = getattr(plugin, method)(*args, **kwargs) File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_cancelobject/__init__.py", line 250, in on_event with open(selectedFile, "r") as f: IOError: [Errno 2] No such file or directory: '' 2019-12-15 07:42:35,618 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Printing" 2019-12-15 07:42:35,624 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 07:42:35,639 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2019-12-15 07:42:36,278 - octoprint.plugins.tracking - INFO - Sent tracking event print_started, payload: {'origin': u'local', 'file': 'a98961362d6143aecfbde25f7c2cd56edbf8c530'} 2019-12-15 07:42:36,585 - octoprint.plugins.actioncommands - INFO - Command received: 'action:notification Heating...' 2019-12-15 07:42:36,599 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:notification Heating...' 2019-12-15 07:42:44,208 - octoprint.plugins.actioncommands - INFO - Command received: 'action:notification Leveling Bed...' 2019-12-15 07:42:44,210 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:notification Leveling Bed...' 2019-12-15 07:43:02,135 - octoprint.plugins.actioncommands - INFO - Command received: 'action:notification Doing G29' 2019-12-15 07:43:02,138 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:notification Doing G29' 2019-12-15 07:43:02,222 - octoprint.plugins.actioncommands - INFO - Command received: 'action:notification Printing...' 2019-12-15 07:43:02,224 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:notification Printing...' 2019-12-15 07:43:02,352 - octoprint.plugins.actioncommands - INFO - Command received: 'action:notification Doing G29' 2019-12-15 07:43:02,354 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:notification Doing G29' 2019-12-15 07:43:18,769 - octoprint.plugins.actioncommands - INFO - Command received: 'action:notification Printing...' 2019-12-15 07:43:18,770 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:notification Printing...' 2019-12-15 07:43:19,047 - octoprint.plugins.cancelobject - INFO - Tracking Extrusion 2019-12-15 07:43:19,082 - octoprint.plugins.actioncommands - INFO - Command received: 'action:notification Priming Nozzle...' 2019-12-15 07:43:19,083 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:notification Priming Nozzle...' 2019-12-15 07:43:19,393 - octoprint.plugins.cancelobject - INFO - Not Tracking Extrusion 2019-12-15 07:43:23,561 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Pausing" 2019-12-15 07:43:23,580 - octoprint.plugins.filamentmanager - INFO - Filament used: 0.0 mm (tool0) 2019-12-15 07:43:33,993 - octoprint.plugins.cancelobject - INFO - Tracking Extrusion 2019-12-15 07:43:34,884 - octoprint.printer.standard.job - INFO - Print job paused - origin: local, path: OctolaspeTests/hollow_cube_PLA0.32mm_0.4n_Ender3_3m.gcode, owner: NovaViper, user: NovaViper 2019-12-15 07:43:34,891 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 07:43:35,145 - octoprint.util.comm - INFO - Changing monitoring state from "Pausing" to "Paused" 2019-12-15 07:43:42,381 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2019-12-15 07:44:03,328 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 1824} 2019-12-15 07:44:41,308 - octoprint.util.comm - INFO - Changing monitoring state from "Paused" to "Resuming" 2019-12-15 07:44:41,326 - octoprint.printer.standard.job - INFO - Print job resumed - origin: local, path: OctolaspeTests/hollow_cube_PLA0.32mm_0.4n_Ender3_3m.gcode, owner: NovaViper, user: NovaViper 2019-12-15 07:44:41,340 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 07:44:41,542 - octoprint.util.comm - INFO - Changing monitoring state from "Resuming" to "Printing" 2019-12-15 07:44:44,547 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer. 2019-12-15 07:44:47,563 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer. 2019-12-15 07:44:50,575 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer. 2019-12-15 07:44:53,616 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer. 2019-12-15 07:44:54,783 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer. 2019-12-15 07:44:54,808 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Offline" 2019-12-15 07:44:54,950 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 07:44:55,255 - octoprint.plugins.filamentmanager - INFO - Filament used: 0.0 mm (tool0) 2019-12-15 07:44:55,353 - octoprint.plugins.DisplayLayerProgress - INFO - Printing stopped. Detailed progress stopped. 2019-12-15 07:44:55,384 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 07:45:00,250 - octoprint.plugins.tracking - INFO - Sent tracking event print_failed, payload: {'origin': u'local', u'reason': u'error', u'commerror_text': u'', 'file': 'a98961362d6143aecfbde25f7c2cd56edbf8c530', u'elapsed': 61} 2019-12-15 07:45:25,409 - octoprint.plugins.portlister - INFO - on_port_created connection_options {u'portPreference': None, u'autoconnect': True, u'baudrates': [250000, 230400, 115200, 57600, 38400, 19200, 9600], u'ports': [u'/dev/ttyACM0'], u'baudratePreference': 250000} 2019-12-15 07:45:25,411 - octoprint.plugins.portlister - INFO - Checking if /dev/ttyACM0 is in [u'/dev/ttyACM0'] 2019-12-15 07:45:25,417 - octoprint.plugins.portlister - INFO - autoconnect_delay 20 2019-12-15 07:45:26,395 - octoprint.plugins.portlister - INFO - on_port_created connection_options {u'portPreference': None, u'autoconnect': True, u'baudrates': [250000, 230400, 115200, 57600, 38400, 19200, 9600], u'ports': [u'/dev/ttyACM0'], u'baudratePreference': 250000} 2019-12-15 07:45:26,397 - octoprint.plugins.portlister - INFO - Checking if /dev/sg0 is in [u'/dev/ttyACM0'] 2019-12-15 07:45:26,398 - octoprint.plugins.portlister - WARNING - Won't autoconnect because /dev/sg0 isn't in [u'/dev/ttyACM0'] 2019-12-15 07:45:26,425 - octoprint.plugins.portlister - INFO - on_port_created connection_options {u'portPreference': None, u'autoconnect': True, u'baudrates': [250000, 230400, 115200, 57600, 38400, 19200, 9600], u'ports': [u'/dev/ttyACM0'], u'baudratePreference': 250000} 2019-12-15 07:45:26,427 - octoprint.plugins.portlister - INFO - Checking if /dev/sda is in [u'/dev/ttyACM0'] 2019-12-15 07:45:26,429 - octoprint.plugins.portlister - WARNING - Won't autoconnect because /dev/sda isn't in [u'/dev/ttyACM0'] 2019-12-15 07:45:32,087 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial port" 2019-12-15 07:45:32,143 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial port" to "Opening serial port" 2019-12-15 07:45:32,148 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial port" to "Connecting" 2019-12-15 07:45:32,164 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2019-12-15 07:45:32,174 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2019-12-15 07:45:45,421 - octoprint.plugins.portlister - INFO - do_auto_connect 2019-12-15 07:45:45,423 - octoprint.plugins.portlister - INFO - realpath match 2019-12-15 07:45:45,462 - octoprint.plugins.portlister - INFO - Not autoconnecting; printer already connected 2019-12-15 07:45:45,514 - octoprint.plugins.portlister - WARNING - Not auto connecting because printer is not closed nor in error state. 2019-12-15 07:45:46,949 - octoprint.util.comm - INFO - Changing monitoring state from "Connecting" to "Operational" 2019-12-15 07:45:46,963 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2019-12-15 07:45:46,977 - octoprint.plugins.firmwareupdater - INFO - Got CONNECTED event 2019-12-15 07:45:46,982 - octoprint.plugins.firmwareupdater - INFO - Run postflash flag is not set 2019-12-15 07:45:46,984 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 07:45:47,178 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin 2.0.x (GitHub)" 2019-12-15 07:45:47,192 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting 2019-12-15 07:45:47,240 - octoprint.util.comm - INFO - Firmware states that it supports emergency GCODEs to be sent without waiting for an acknowledgement first 2019-12-15 07:45:47,954 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {u'printer_baudrate': 250000, u'printer_port': None, 'firmware_name': u'Marlin 2.0.x (GitHub)'} 2019-12-15 07:46:09,738 - octoprint.printer.standard.job - INFO - Print job selected - origin: local, path: OctolaspeTests/hollow_cube_PLA0.32mm_0.4n_Ender3_3m.gcode, owner: NovaViper, user: NovaViper 2019-12-15 07:46:09,748 - octoprint.plugins.DisplayLayerProgress - INFO - File selected. Determining number of layers. 2019-12-15 07:46:09,764 - octoprint.plugin - ERROR - Error while calling plugin DisplayLayerProgress Traceback (most recent call last): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/plugin/__init__.py", line 224, in call_plugin result = getattr(plugin, method)(*args, **kwargs) File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_DisplayLayerProgress/__init__.py", line 344, in on_event with open(selectedFile, "r") as f: IOError: [Errno 2] No such file or directory: '' 2019-12-15 07:46:09,873 - octoprint.plugin - ERROR - Error while calling plugin cancelobject Traceback (most recent call last): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/plugin/__init__.py", line 224, in call_plugin result = getattr(plugin, method)(*args, **kwargs) File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_cancelobject/__init__.py", line 250, in on_event with open(selectedFile, "r") as f: IOError: [Errno 2] No such file or directory: '' 2019-12-15 07:46:25,372 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting" 2019-12-15 07:46:25,387 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: OctolaspeTests/hollow_cube_PLA0.32mm_0.4n_Ender3_3m.gcode, owner: NovaViper, user: NovaViper 2019-12-15 07:46:25,459 - octoprint.plugins.DisplayLayerProgress - INFO - Printing started. Detailed progress started.{'origin': u'local', 'name': u'hollow_cube_PLA0.32mm_0.4n_Ender3_3m.gcode', u'user': 'NovaViper', u'owner': 'NovaViper', 'path': u'OctolaspeTests/hollow_cube_PLA0.32mm_0.4n_Ender3_3m.gcode', 'size': 55676L} 2019-12-15 07:46:25,474 - octoprint.plugin - ERROR - Error while calling plugin cancelobject Traceback (most recent call last): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/plugin/__init__.py", line 224, in call_plugin result = getattr(plugin, method)(*args, **kwargs) File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_cancelobject/__init__.py", line 250, in on_event with open(selectedFile, "r") as f: IOError: [Errno 2] No such file or directory: '' 2019-12-15 07:46:25,702 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Printing" 2019-12-15 07:46:25,716 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 07:46:25,735 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2019-12-15 07:46:26,195 - octoprint.plugins.actioncommands - INFO - Command received: 'action:notification Heating...' 2019-12-15 07:46:26,197 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:notification Heating...' 2019-12-15 07:46:26,268 - octoprint.plugins.tracking - INFO - Sent tracking event print_started, payload: {'origin': u'local', 'file': 'a98961362d6143aecfbde25f7c2cd56edbf8c530'} 2019-12-15 07:46:28,323 - octoprint.util.comm - INFO - Printer seems to support the busy protocol, will adjust timeouts and set busy interval accordingly 2019-12-15 07:46:35,546 - octoprint.util.comm - INFO - Telling the printer to set the busy interval to our "communicationBusy" timeout - 1s = 2s 2019-12-15 07:46:35,622 - octoprint.plugins.actioncommands - INFO - Command received: 'action:notification Leveling Bed...' 2019-12-15 07:46:35,624 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:notification Leveling Bed...' 2019-12-15 07:46:53,630 - octoprint.plugins.actioncommands - INFO - Command received: 'action:notification Doing G29' 2019-12-15 07:46:53,633 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:notification Doing G29' 2019-12-15 07:46:53,744 - octoprint.plugins.actioncommands - INFO - Command received: 'action:notification Nova Ender-3 Ready.' 2019-12-15 07:46:53,745 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:notification Nova Ender-3 Ready.' 2019-12-15 07:46:53,906 - octoprint.plugins.actioncommands - INFO - Command received: 'action:notification Doing G29' 2019-12-15 07:46:53,907 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:notification Doing G29' 2019-12-15 07:47:10,319 - octoprint.plugins.actioncommands - INFO - Command received: 'action:notification Nova Ender-3 Ready.' 2019-12-15 07:47:10,326 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:notification Nova Ender-3 Ready.' 2019-12-15 07:47:10,665 - octoprint.plugins.cancelobject - INFO - Tracking Extrusion 2019-12-15 07:47:10,699 - octoprint.plugins.actioncommands - INFO - Command received: 'action:notification Priming Nozzle...' 2019-12-15 07:47:10,701 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:notification Priming Nozzle...' 2019-12-15 07:47:11,027 - octoprint.plugins.cancelobject - INFO - Not Tracking Extrusion 2019-12-15 07:47:25,631 - octoprint.plugins.cancelobject - INFO - Tracking Extrusion 2019-12-15 07:47:25,745 - octoprint.plugins.cancelobject - INFO - Not Tracking Extrusion 2019-12-15 07:47:25,899 - octoprint.plugins.actioncommands - INFO - Command received: 'action:notification Printing...' 2019-12-15 07:47:25,901 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:notification Printing...' 2019-12-15 07:47:30,058 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Pausing" 2019-12-15 07:47:30,116 - octoprint.plugins.filamentmanager - INFO - Filament used: 0.0 mm (tool0) 2019-12-15 07:47:32,223 - octoprint.printer.standard.job - INFO - Print job paused - origin: local, path: OctolaspeTests/hollow_cube_PLA0.32mm_0.4n_Ender3_3m.gcode, owner: NovaViper, user: NovaViper 2019-12-15 07:47:32,229 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 07:47:32,374 - octoprint.util.comm - INFO - Pausing print job due to command M25 2019-12-15 07:47:32,522 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_end' 2019-12-15 07:47:32,525 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_end' 2019-12-15 07:47:32,634 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_begin Pause' 2019-12-15 07:47:32,636 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_begin Pause' 2019-12-15 07:47:32,722 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_button Dismiss' 2019-12-15 07:47:32,725 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_button Dismiss' 2019-12-15 07:47:32,809 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_show' 2019-12-15 07:47:32,814 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_show' 2019-12-15 07:47:38,349 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_end' 2019-12-15 07:47:38,361 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_end' 2019-12-15 07:47:38,453 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_begin Nozzle Parked' 2019-12-15 07:47:38,456 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_begin Nozzle Parked' 2019-12-15 07:47:38,533 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_button Continue' 2019-12-15 07:47:38,536 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_button Continue' 2019-12-15 07:47:38,619 - octoprint.plugins.actioncommands - INFO - Command received: 'action:prompt_show' 2019-12-15 07:47:38,622 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:prompt_show' 2019-12-15 07:48:08,656 - octoprint.util.comm - INFO - Changing monitoring state from "Pausing" to "Resuming" 2019-12-15 07:48:08,673 - octoprint.printer.standard.job - INFO - Print job resumed - origin: local, path: OctolaspeTests/hollow_cube_PLA0.32mm_0.4n_Ender3_3m.gcode, owner: NovaViper, user: None 2019-12-15 07:48:08,676 - octoprint.util.comm - INFO - Force-sending M876 to the printer 2019-12-15 07:48:08,687 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 07:48:08,690 - octoprint.plugin - ERROR - Error while calling plugin stats Traceback (most recent call last): File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/plugin/__init__.py", line 224, in call_plugin result = getattr(plugin, method)(*args, **kwargs) File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_stats/__init__.py", line 966, in on_event user = payload["user"] KeyError: 'user' 2019-12-15 07:48:08,693 - octoprint.util.comm - INFO - Force-sending M876 to the printer 2019-12-15 07:48:08,700 - octoprint.plugins.actioncommands - INFO - Command received: 'action:notification Nova Ender-3 Ready.' 2019-12-15 07:48:08,702 - octoprint.plugins.actioncommands - ERROR - No command found for 'action:notification Nova Ender-3 Ready.' 2019-12-15 07:48:08,961 - octoprint.util.comm - INFO - Changing monitoring state from "Resuming" to "Printing" 2019-12-15 07:48:11,357 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Cancelling" 2019-12-15 07:48:11,368 - octoprint.util.comm - INFO - Force-sending M108 to the printer 2019-12-15 07:48:11,373 - octoprint.plugins.filamentmanager - INFO - Filament used: 0.0 mm (tool0) 2019-12-15 07:48:11,376 - octoprint.util.comm - INFO - Force-sending M108 to the printer 2019-12-15 07:48:11,399 - octoprint.printer.standard.job - INFO - Print job cancelled - origin: local, path: OctolaspeTests/hollow_cube_PLA0.32mm_0.4n_Ender3_3m.gcode, owner: NovaViper, user: NovaViper 2019-12-15 07:48:11,489 - octoprint.plugins.DisplayLayerProgress - INFO - Printing stopped. Detailed progress stopped. 2019-12-15 07:48:11,532 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 07:48:11,783 - octoprint.util.comm - INFO - Changing monitoring state from "Cancelling" to "Operational" 2019-12-15 07:48:12,025 - octoprint.plugins.DisplayLayerProgress - INFO - Printing stopped. Detailed progress stopped. 2019-12-15 07:48:12,059 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2019-12-15 07:48:12,414 - octoprint.plugins.tracking - INFO - Sent tracking event print_cancelled, payload: {'origin': u'local', 'file': 'a98961362d6143aecfbde25f7c2cd56edbf8c530', u'elapsed': 67} 2019-12-15 07:48:13,332 - octoprint.plugins.tracking - INFO - Sent tracking event print_failed, payload: {'origin': u'local', u'reason': u'cancelled', 'file': 'a98961362d6143aecfbde25f7c2cd56edbf8c530', u'elapsed': 67}