camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- cfg_file: /boot/octopi.conf.d/webcam2.txt camera: usb usb options: -r 1280x720 -f 10 -d /dev/v4l/by-id/usb-046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 raspi options: -fps 10 http options: -w ./www -n -p 8081 Explicitly USB device: /dev/v4l/by-id/usb-046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video2 raspi config file='/boot/octopi.conf.d/webcam2.txt':USB device was set in options and found in devices, start MJPG-streamer with the configured USB video device: /dev/video1 <13>Aug 30 13:17:00 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www -n -p 8081 -i input_uvc.so -r 1280x720 -f 10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 1280 x 720 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www/ o: HTTP TCP port........: 8081 o: HTTP Listen Address..: (null) o: username:password....: disabled o: commands.............: disabled config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video0 <13>Aug 30 13:17:01 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT libv4l2: error setting pixformat: Device or resource busy Unable to set format: 1196444237 res: 640x480 Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- cfg_file: /boot/octopi.conf.d/octopi.txt camera: raspi usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www -n Explicitly USB device: ----------------------------------------------- cfg_file: /boot/octopi.conf.d/webcam2.txt camera: usb usb options: -r 1280x720 -f 10 -d /dev/v4l/by-id/usb-046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 raspi options: -fps 10 http options: -w ./www -n -p 8081 Explicitly USB device: /dev/v4l/by-id/usb-046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video2 raspi config file='/boot/octopi.conf.d/webcam2.txt':USB device was set in options and found in devices, start MJPG-streamer with the configured USB video device: /dev/video1 <13>Aug 30 13:17:37 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www -n -p 8081 -i input_uvc.so -r 1280x720 -f 10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 1280 x 720 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www/ o: HTTP TCP port........: 8081 o: HTTP Listen Address..: (null) o: username:password....: disabled o: commands.............: disabled config file='/boot/octopi.conf.d/octopi.txt':Start MJPG-streamer with video device: raspi <13>Aug 30 13:17:38 root: Starting Raspberry Pi camera Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www -n -i input_raspicam.so -fps 10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: fps.............: 10 i: resolution........: 640 x 480 i: camera parameters..............: Sharpness 0, Contrast 0, Brightness 50 Saturation 0, ISO 0, Video Stabilisation No, Exposure compensation 0 Exposure Mode 'auto', AWB Mode 'auto', Image Effect 'none' Metering Mode 'average', Colour Effect Enabled No with U = 128, V = 128 Rotation 0, hflip No, vflip No ROI x 0.000000, y 0.000000, w 1.000000 h 1.000000 o: www-folder-path......: ./www/ o: HTTP TCP port........: 8080 o: HTTP Listen Address..: (null) o: username:password....: disabled o: commands.............: disabled i: Starting Camera mmal: mmal_vc_component_enable: failed to enable component: ENOSPC camera couldn't be enabled config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video0 <13>Aug 30 13:18:09 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT libv4l2: error setting pixformat: Device or resource busy Unable to set format: 1196444237 res: 640x480 Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- cfg_file: /boot/octopi.conf.d/octopi.txt camera: raspi usb options: -r 640x480 -f 10 raspi options: -fps 24 -x 1920 -y 1080 http options: -w ./www -n -p 8080 Explicitly USB device: ----------------------------------------------- cfg_file: /boot/octopi.conf.d/webcam2.txt camera: usb usb options: -r 1280x720 -f 10 -d /dev/v4l/by-id/usb-046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 raspi options: -fps 10 http options: -w ./www -n -p 8081 Explicitly USB device: /dev/v4l/by-id/usb-046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video2 raspi config file='/boot/octopi.conf.d/webcam2.txt':USB device was set in options and found in devices, start MJPG-streamer with the configured USB video device: /dev/video1 <13>Aug 30 13:19:15 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www -n -p 8081 -i input_uvc.so -r 1280x720 -f 10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 1280 x 720 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www/ o: HTTP TCP port........: 8081 o: HTTP Listen Address..: (null) o: username:password....: disabled o: commands.............: disabled config file='/boot/octopi.conf.d/octopi.txt':Start MJPG-streamer with video device: raspi <13>Aug 30 13:19:16 root: Starting Raspberry Pi camera Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www -n -p 8080 -i input_raspicam.so -fps 24 -x 1920 -y 1080 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: fps.............: 24 i: resolution........: 1920 x 1080 i: camera parameters..............: Sharpness 0, Contrast 0, Brightness 50 Saturation 0, ISO 0, Video Stabilisation No, Exposure compensation 0 Exposure Mode 'auto', AWB Mode 'auto', Image Effect 'none' Metering Mode 'average', Colour Effect Enabled No with U = 128, V = 128 Rotation 0, hflip No, vflip No ROI x 0.000000, y 0.000000, w 1.000000 h 1.000000 o: www-folder-path......: ./www/ o: HTTP TCP port........: 8080 o: HTTP Listen Address..: (null) o: username:password....: disabled o: commands.............: disabled i: Starting Camera mmal: mmal_vc_component_enable: failed to enable component: ENOSPC camera couldn't be enabled config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video0 <13>Aug 30 13:19:47 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT libv4l2: error setting pixformat: Device or resource busy Unable to set format: 1196444237 res: 640x480 Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- cfg_file: /boot/octopi.conf.d/octopi.txt camera: raspi usb options: -r 640x480 -f 10 raspi options: -fps 24 -x 1920 -y 1080 http options: -w ./www -n -p 8080 Explicitly USB device: ----------------------------------------------- cfg_file: /boot/octopi.conf.d/webcam2.txt camera: usb usb options: -r 1280x720 -f 10 -d /dev/v4l/by-id/usb-046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 raspi options: -fps 10 http options: -w ./www -n -p 8081 Explicitly USB device: /dev/v4l/by-id/usb-046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video2 raspi config file='/boot/octopi.conf.d/webcam2.txt':USB device was set in options and found in devices, start MJPG-streamer with the configured USB video device: /dev/video1 <13>Aug 30 13:21:36 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www -n -p 8081 -i input_uvc.so -r 1280x720 -f 10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 1280 x 720 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www/ o: HTTP TCP port........: 8081 o: HTTP Listen Address..: (null) o: username:password....: disabled o: commands.............: disabled config file='/boot/octopi.conf.d/octopi.txt':Start MJPG-streamer with video device: raspi <13>Aug 30 13:21:37 root: Starting Raspberry Pi camera Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www -n -p 8080 -i input_raspicam.so -fps 24 -x 1920 -y 1080 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: fps.............: 24 i: resolution........: 1920 x 1080 i: camera parameters..............: Sharpness 0, Contrast 0, Brightness 50 Saturation 0, ISO 0, Video Stabilisation No, Exposure compensation 0 Exposure Mode 'auto', AWB Mode 'auto', Image Effect 'none' Metering Mode 'average', Colour Effect Enabled No with U = 128, V = 128 Rotation 0, hflip No, vflip No ROI x 0.000000, y 0.000000, w 1.000000 h 1.000000 o: www-folder-path......: ./www/ o: HTTP TCP port........: 8080 o: HTTP Listen Address..: (null) o: username:password....: disabled o: commands.............: disabled i: Starting Camera mmal: mmal_vc_component_enable: failed to enable component: ENOSPC camera couldn't be enabled config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video0 <13>Aug 30 13:22:08 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT libv4l2: error setting pixformat: Device or resource busy Unable to set format: 1196444237 res: 640x480 Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- cfg_file: /boot/octopi.conf.d/octopi.txt camera: raspi usb options: -r 640x480 -f 10 raspi options: -fps 24 -x 1920 -y 1080 http options: -w ./www -n -p 8080 Explicitly USB device: ----------------------------------------------- cfg_file: /boot/octopi.conf.d/webcam2.txt camera: usb usb options: -d /dev/v4l/by-id/usb0046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 raspi options: -fps 10 http options: -w ./www -n -p 8081 Explicitly USB device: /dev/v4l/by-id/usb0046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video2 raspi config file='/boot/octopi.conf.d/octopi.txt':Start MJPG-streamer with video device: raspi <13>Aug 30 13:23:49 root: Starting Raspberry Pi camera Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www -n -p 8080 -i input_raspicam.so -fps 24 -x 1920 -y 1080 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: fps.............: 24 i: resolution........: 1920 x 1080 i: camera parameters..............: Sharpness 0, Contrast 0, Brightness 50 Saturation 0, ISO 0, Video Stabilisation No, Exposure compensation 0 Exposure Mode 'auto', AWB Mode 'auto', Image Effect 'none' Metering Mode 'average', Colour Effect Enabled No with U = 128, V = 128 Rotation 0, hflip No, vflip No ROI x 0.000000, y 0.000000, w 1.000000 h 1.000000 o: www-folder-path......: ./www/ o: HTTP TCP port........: 8080 o: HTTP Listen Address..: (null) o: username:password....: disabled o: commands.............: disabled i: Starting Camera Encoder Buffer Size 81920 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video0 <13>Aug 30 13:24:20 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www-octopi/ o: HTTP TCP port........: 8080 o: HTTP Listen Address..: 127.0.0.1 o: username:password....: disabled o: commands.............: disabled bind: Address already in use o: server_thread(): bind(8080) failed Scan again in two minutes /root/bin/webcamd: line 103: kill: (14419) - No such process Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- cfg_file: /boot/octopi.conf.d/octopi.txt camera: raspi usb options: -r 640x480 -f 10 raspi options: -fps 24 -x 1920 -y 1080 http options: -w ./www -n -p 8080 Explicitly USB device: ----------------------------------------------- cfg_file: /boot/octopi.conf.d/webcam2.txt camera: usb usb options: -d /dev/v4l/by-id/usb0046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 raspi options: -fps 10 http options: -w ./www -n -p 8081 Explicitly USB device: /dev/v4l/by-id/usb0046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video2 raspi config file='/boot/octopi.conf.d/octopi.txt':Start MJPG-streamer with video device: raspi <13>Aug 30 13:25:20 root: Starting Raspberry Pi camera Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www -n -p 8080 -i input_raspicam.so -fps 24 -x 1920 -y 1080 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: fps.............: 24 i: resolution........: 1920 x 1080 i: camera parameters..............: Sharpness 0, Contrast 0, Brightness 50 Saturation 0, ISO 0, Video Stabilisation No, Exposure compensation 0 Exposure Mode 'auto', AWB Mode 'auto', Image Effect 'none' Metering Mode 'average', Colour Effect Enabled No with U = 128, V = 128 Rotation 0, hflip No, vflip No ROI x 0.000000, y 0.000000, w 1.000000 h 1.000000 o: www-folder-path......: ./www/ o: HTTP TCP port........: 8080 o: HTTP Listen Address..: (null) o: username:password....: disabled o: commands.............: disabled i: Starting Camera Encoder Buffer Size 81920 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video0 <13>Aug 30 13:25:51 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www-octopi/ o: HTTP TCP port........: 8080 o: HTTP Listen Address..: 127.0.0.1 o: username:password....: disabled o: commands.............: disabled bind: Address already in use o: server_thread(): bind(8080) failed Scan again in two minutes Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- cfg_file: /boot/octopi.conf.d/octopi.txt camera: raspi usb options: -r 640x480 -f 10 raspi options: -fps 24 -x 1920 -y 1080 http options: -w ./www -n -p 8080 Explicitly USB device: ----------------------------------------------- cfg_file: /boot/octopi.conf.d/webcam2.txt camera: usb usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www -n -p 8081 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video2 raspi config file='/boot/octopi.conf.d/webcam2.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video0 <13>Aug 30 13:25:53 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www -n -p 8081 -i input_uvc.so -r 640x480 -f 10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www/ o: HTTP TCP port........: 8081 o: HTTP Listen Address..: (null) o: username:password....: disabled o: commands.............: disabled config file='/boot/octopi.conf.d/octopi.txt':Start MJPG-streamer with video device: raspi <13>Aug 30 13:25:54 root: Starting Raspberry Pi camera Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www -n -p 8080 -i input_raspicam.so -fps 24 -x 1920 -y 1080 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: fps.............: 24 i: resolution........: 1920 x 1080 i: camera parameters..............: Sharpness 0, Contrast 0, Brightness 50 Saturation 0, ISO 0, Video Stabilisation No, Exposure compensation 0 Exposure Mode 'auto', AWB Mode 'auto', Image Effect 'none' Metering Mode 'average', Colour Effect Enabled No with U = 128, V = 128 Rotation 0, hflip No, vflip No ROI x 0.000000, y 0.000000, w 1.000000 h 1.000000 o: www-folder-path......: ./www/ o: HTTP TCP port........: 8080 o: HTTP Listen Address..: (null) o: username:password....: disabled o: commands.............: disabled i: Starting Camera mmal: mmal_vc_component_enable: failed to enable component: ENOSPC camera couldn't be enabled /root/bin/webcamd: line 103: kill: (14536) - No such process /root/bin/webcamd: line 103: kill: (14551) - No such process Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- cfg_file: /boot/octopi.conf.d/octopi.txt camera: raspi usb options: -r 640x480 -f 10 raspi options: -fps 24 -x 1920 -y 1080 http options: -w ./www -n -p 8080 Explicitly USB device: ----------------------------------------------- cfg_file: /boot/octopi.conf.d/webcam2.txt camera: usb usb options: -d /dev/v4l/by-id/usb0046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 raspi options: -fps 10 http options: -w ./www -n -p 8081 Explicitly USB device: /dev/v4l/by-id/usb0046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video2 raspi config file='/boot/octopi.conf.d/octopi.txt':Start MJPG-streamer with video device: raspi <13>Aug 30 13:26:22 root: Starting Raspberry Pi camera Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www -n -p 8080 -i input_raspicam.so -fps 24 -x 1920 -y 1080 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: fps.............: 24 i: resolution........: 1920 x 1080 i: camera parameters..............: Sharpness 0, Contrast 0, Brightness 50 Saturation 0, ISO 0, Video Stabilisation No, Exposure compensation 0 Exposure Mode 'auto', AWB Mode 'auto', Image Effect 'none' Metering Mode 'average', Colour Effect Enabled No with U = 128, V = 128 Rotation 0, hflip No, vflip No ROI x 0.000000, y 0.000000, w 1.000000 h 1.000000 o: www-folder-path......: ./www/ o: HTTP TCP port........: 8080 o: HTTP Listen Address..: (null) o: username:password....: disabled o: commands.............: disabled i: Starting Camera mmal: mmal_vc_component_enable: failed to enable component: ENOSPC camera couldn't be enabled config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video0 <13>Aug 30 13:26:53 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Scan again in two minutes /root/bin/webcamd: line 103: kill: (14630) - No such process Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- cfg_file: /boot/octopi.conf.d/webcam2.txt camera: usb usb options: -d /dev/v4l/by-id/usb0046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 raspi options: -fps 10 http options: -w ./www -n -p 8081 Explicitly USB device: /dev/v4l/by-id/usb0046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video2 raspi config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video0 <13>Aug 30 13:30:52 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Scan again in two minutes Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- cfg_file: /boot/octopi.conf.d/webcam2.txt camera: usb usb options: -d /dev/v4l/by-id/usb0046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 raspi options: -fps 10 http options: -w ./www -n -p 8081 Explicitly USB device: /dev/v4l/by-id/usb0046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video0 <13>Aug 30 13:34:00 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www-octopi/ o: HTTP TCP port........: 8080 o: HTTP Listen Address..: 127.0.0.1 o: username:password....: disabled o: commands.............: disabled Scan again in two minutes /root/bin/webcamd: line 103: kill: (502) - No such process Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- cfg_file: /boot/octopi.conf.d/webcam2.txt camera: usb usb options: -d /dev/v4l/by-id/usb0046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 raspi options: -fps 10 http options: -w ./www -n -p 8081 Explicitly USB device: /dev/v4l/by-id/usb0046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video0 <13>Aug 30 13:38:34 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www-octopi/ o: HTTP TCP port........: 8080 o: HTTP Listen Address..: 127.0.0.1 o: username:password....: disabled o: commands.............: disabled Scan again in two minutes /root/bin/webcamd: line 103: kill: (1010) - No such process Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- cfg_file: /boot/octopi.conf.d/webcam2.txt camera: usb usb options: -d /dev/v4l/by-id/usb0046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 raspi options: -fps 10 http options: -w ./www -n -p 8081 Explicitly USB device: /dev/v4l/by-id/usb0046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video0 <13>Aug 30 13:39:16 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video0 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www-octopi/ o: HTTP TCP port........: 8080 o: HTTP Listen Address..: 127.0.0.1 o: username:password....: disabled o: commands.............: disabled Scan again in two minutes /root/bin/webcamd: line 103: kill: (1075) - No such process Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- cfg_file: /boot/octopi.conf.d/octopi.txt camera: raspi usb options: -r 640x480 -f 10 raspi options: -fps 24 -x 1920 -y 1080 http options: -w ./www -n -p 8080 Explicitly USB device: ----------------------------------------------- cfg_file: /boot/octopi.conf.d/webcam2.txt camera: usb usb options: -d /dev/v4l/by-id/usb0046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 raspi options: -fps 10 http options: -w ./www -n -p 8081 Explicitly USB device: /dev/v4l/by-id/usb0046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video0 <13>Aug 30 13:40:30 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video0 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www-octopi/ o: HTTP TCP port........: 8080 o: HTTP Listen Address..: 127.0.0.1 o: username:password....: disabled o: commands.............: disabled Scan again in two minutes /root/bin/webcamd: line 103: kill: (1150) - No such process Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- cfg_file: /boot/octopi.conf.d/octopi.txt camera: usb usb options: -r 1920x1080 -f 24 raspi options: -fps 10 http options: -w ./www -n -p 8080 Explicitly USB device: ----------------------------------------------- cfg_file: /boot/octopi.conf.d/webcam2.txt camera: usb usb options: -d /dev/v4l/by-id/usb0046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 raspi options: -fps 10 http options: -w ./www -n -p 8081 Explicitly USB device: /dev/v4l/by-id/usb0046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.conf.d/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video0 <13>Aug 30 13:41:25 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www -n -p 8080 -i input_uvc.so -r 1920x1080 -f 24 -d /dev/video0 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 1920 x 1080 i: Frames Per Second.: 24 i: Format............: JPEG i: TV-Norm...........: DEFAULT UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www/ o: HTTP TCP port........: 8080 o: HTTP Listen Address..: (null) o: username:password....: disabled o: commands.............: disabled config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video1 <13>Aug 30 13:41:26 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video1 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video1 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Unable to set format: 1196444237 res: 640x480 Init v4L2 failed !! exit fatal i: init_VideoIn failed Scan again in two minutes Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- cfg_file: /boot/octopi.conf.d/webcam2.txt camera: usb usb options: -d /dev/v4l/by-id/usb0046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 raspi options: -fps 10 http options: -w ./www -n -p 8081 Explicitly USB device: /dev/v4l/by-id/usb0046d_HD_Pro_Webcam_C920_B596D2EF-video-index0 ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video0 <13>Aug 30 13:42:27 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video0 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www-octopi/ o: HTTP TCP port........: 8080 o: HTTP Listen Address..: 127.0.0.1 o: username:password....: disabled o: commands.............: disabled Scan again in two minutes /root/bin/webcamd: line 103: kill: (1304) - No such process Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- cfg_file: /boot/octopi.conf.d/webcam2.txt camera: usb usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www -n -p 8081 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.conf.d/webcam2.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video0 <13>Aug 30 13:43:01 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www -n -p 8081 -i input_uvc.so -r 640x480 -f 10 -d /dev/video0 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www/ o: HTTP TCP port........: 8081 o: HTTP Listen Address..: (null) o: username:password....: disabled o: commands.............: disabled config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video1 <13>Aug 30 13:43:03 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video1 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video1 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Unable to set format: 1196444237 res: 640x480 Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- cfg_file: /boot/octopi.conf.d/octopi.txt camera: raspi usb options: -r 640x480 -f 10 raspi options: -fps 24 -x 1920 -y 1080 http options: -w ./www -n -p 8080 Explicitly USB device: ----------------------------------------------- cfg_file: /boot/octopi.conf.d/webcam2.txt camera: usb usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www -n -p 8081 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.conf.d/webcam2.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video0 <13>Aug 30 13:44:01 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www -n -p 8081 -i input_uvc.so -r 640x480 -f 10 -d /dev/video0 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www/ o: HTTP TCP port........: 8081 o: HTTP Listen Address..: (null) o: username:password....: disabled o: commands.............: disabled config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video1 <13>Aug 30 13:44:02 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video1 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video1 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Unable to set format: 1196444237 res: 640x480 Init v4L2 failed !! exit fatal i: init_VideoIn failed Scan again in two minutes /root/bin/webcamd: line 103: kill: (1462) - No such process Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- cfg_file: /boot/octopi.conf.d/octopi.txt camera: raspi usb options: -r 640x480 -f 10 raspi options: -fps 24 -x 1920 -y 1080 http options: -w ./www -n -p 8080 Explicitly USB device: ----------------------------------------------- cfg_file: /boot/octopi.conf.d/webcam2.txt camera: usb usb options: -r 1280x720 -f 24 raspi options: -fps 10 http options: -w ./www -n -p 8081 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.conf.d/webcam2.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video0 <13>Aug 30 13:44:58 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www -n -p 8081 -i input_uvc.so -r 1280x720 -f 24 -d /dev/video0 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 1280 x 720 i: Frames Per Second.: 24 i: Format............: JPEG i: TV-Norm...........: DEFAULT UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www/ o: HTTP TCP port........: 8081 o: HTTP Listen Address..: (null) o: username:password....: disabled o: commands.............: disabled config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video1 <13>Aug 30 13:45:00 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video1 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video1 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Unable to set format: 1196444237 res: 640x480 Init v4L2 failed !! exit fatal i: init_VideoIn failed Scan again in two minutes /root/bin/webcamd: line 103: kill: (1549) - No such process Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: raspi usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www -n Explicitly USB device: ----------------------------------------------- cfg_file: /boot/octopi.conf.d/webcam2.txt camera: usb usb options: -r 1280x720 -f 24 raspi options: -fps 10 http options: -w ./www -n -p 8081 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.conf.d/webcam2.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video0 <13>Aug 30 13:45:26 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www -n -p 8081 -i input_uvc.so -r 1280x720 -f 24 -d /dev/video0 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 1280 x 720 i: Frames Per Second.: 24 i: Format............: JPEG i: TV-Norm...........: DEFAULT UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www/ o: HTTP TCP port........: 8081 o: HTTP Listen Address..: (null) o: username:password....: disabled o: commands.............: disabled Scan again in two minutes /root/bin/webcamd: line 103: kill: (1606) - No such process Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: raspi usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www -n Explicitly USB device: ----------------------------------------------- cfg_file: /boot/octopi.conf.d/webcam2.txt camera: usb usb options: -r 1280x720 -f 24 raspi options: -fps 10 http options: -w ./www -n -p 8081 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.conf.d/webcam2.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video0 <13>Aug 30 13:46:03 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www -n -p 8081 -i input_uvc.so -r 1280x720 -f 24 -d /dev/video0 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 1280 x 720 i: Frames Per Second.: 24 i: Format............: JPEG i: TV-Norm...........: DEFAULT libv4l2: error setting pixformat: Device or resource busy Unable to set format: 1196444237 res: 1280x720 Init v4L2 failed !! exit fatal i: init_VideoIn failed Scan again in two minutes /root/bin/webcamd: line 103: kill: (1658) - No such process Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- /boot/octopi.txt: line 25: camera_usb_options-d /dev/video0: No such file or directory cfg_file: /boot/octopi.txt camera: usb usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www -n Explicitly USB device: ----------------------------------------------- cfg_file: /boot/octopi.conf.d/webcam2.txt camera: usb usb options: -r 1280x720 -f 24 raspi options: -fps 10 http options: -w ./www -n -p 8081 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video0 <13>Aug 30 13:47:22 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www -n -i input_uvc.so -r 640x480 -f 10 -d /dev/video0 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www/ o: HTTP TCP port........: 8080 o: HTTP Listen Address..: (null) o: username:password....: disabled o: commands.............: disabled config file='/boot/octopi.conf.d/webcam2.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video1 <13>Aug 30 13:47:24 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www -n -p 8081 -i input_uvc.so -r 1280x720 -f 24 -d /dev/video1 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video1 i: Desired Resolution: 1280 x 720 i: Frames Per Second.: 24 i: Format............: JPEG i: TV-Norm...........: DEFAULT Unable to set format: 1196444237 res: 1280x720 Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: raspi usb options: -r 640x480 -f 10 raspi options: -fps 10 http options: -w ./www -n Explicitly USB device: ----------------------------------------------- cfg_file: /boot/octopi.conf.d/webcam2.txt camera: usb usb options: -r 1280x720 -f 24 raspi options: -fps 10 http options: -w ./www -n -p 8081 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 config file='/boot/octopi.conf.d/webcam2.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video0 <13>Aug 30 13:47:45 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www -n -p 8081 -i input_uvc.so -r 1280x720 -f 24 -d /dev/video0 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 1280 x 720 i: Frames Per Second.: 24 i: Format............: JPEG i: TV-Norm...........: DEFAULT UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www/ o: HTTP TCP port........: 8081 o: HTTP Listen Address..: (null) o: username:password....: disabled o: commands.............: disabled Scan again in two minutes pi@octopi:/boot $