2021-03-28 02:34:51,748 - Changing monitoring state from "Offline" to "Detecting serial connection"
2021-03-28 02:34:51,863 - Performing autodetection with 7 port/baudrate candidates: /dev/ttyACM0@115200, /dev/ttyACM0@250000, /dev/ttyACM0@230400, /dev/ttyACM0@57600, /dev/ttyACM0@38400, /dev/ttyACM0@19200, /dev/ttyACM0@9600
2021-03-28 02:34:51,863 - Trying port /dev/ttyACM0, baudrate 115200
2021-03-28 02:34:51,973 - Handshake attempt #1 with timeout 2.0s
2021-03-28 02:34:52,000 - Connected to: PackingSerial<id=0x679c5cd0, open=True>(port='/dev/ttyACM0', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=2.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
2021-03-28 02:34:52,011 - Send: N0 M110 N0*125
2021-03-28 02:34:53,076 - Recv: start
2021-03-28 02:34:53,124 - Changing monitoring state from "Detecting serial connection" to "Operational"
2021-03-28 02:34:53,320 - Send: N0 M110 N0*125
2021-03-28 02:34:53,487 - Recv: echo:Marlin 1.1.6BL_V3.1
2021-03-28 02:34:53,498 - Recv: 
2021-03-28 02:34:53,604 - Recv: echo: Last Updated: 2019-07-26 | Author: CR-10S BLTouch
2021-03-28 02:34:53,671 - Recv: echo:Compiled: Aug  5 2019
2021-03-28 02:34:54,019 - Recv: echo: Free Memory: 1365  PlannerBufferBytes: 1232
2021-03-28 02:34:54,023 - Recv: echo:V41 stored settings retrieved (498 bytes; crc 45231)
2021-03-28 02:34:54,025 - Recv: echo:  G21    ; Units in mm
2021-03-28 02:34:54,028 - Recv: echo:  M149 C ; Units in Celsius
2021-03-28 02:34:54,029 - Recv: 
2021-03-28 02:34:54,031 - Recv: echo:Filament settings: Disabled
2021-03-28 02:34:54,033 - Recv: echo:  M200 D1.75
2021-03-28 02:34:54,035 - Recv: echo:  M200 D0
2021-03-28 02:34:54,037 - Recv: echo:Steps per unit:
2021-03-28 02:34:54,040 - Recv: echo:  M92 X80.00 Y80.00 Z400.00 E93.00
2021-03-28 02:34:54,043 - Recv: echo:Maximum feedrates (units/s):
2021-03-28 02:34:54,046 - Recv: echo:  M203 X500.00 Y500.00 Z5.00 E25.00
2021-03-28 02:34:54,050 - Recv: echo:Maximum Acceleration (units/s2):
2021-03-28 02:34:54,052 - Recv: echo:  M201 X500 Y500 Z100 E1000
2021-03-28 02:34:54,057 - Recv: echo:Acceleration (units/s2): P<print_accel> R<retract_accel> T<travel_accel>
2021-03-28 02:34:54,060 - Recv: echo:  M204 P500.00 R500.00 T1000.00
2021-03-28 02:34:54,067 - Recv: echo:Advanced: S<min_feedrate> T<min_travel_feedrate> B<min_segment_time_ms> X<max_xy_jerk> Z<max_z_jerk> E<max_e_jerk>
2021-03-28 02:34:54,071 - Recv: echo:  M205 S0.00 T0.00 B20000 X10.00 Y10.00 Z0.40 E5.00
2021-03-28 02:34:54,073 - Recv: echo:Home offset:
2021-03-28 02:34:54,075 - Recv: echo:  M206 X0.00 Y0.00 Z0.00
2021-03-28 02:34:54,078 - Recv: echo:Auto Bed Leveling:
2021-03-28 02:34:54,080 - Recv: echo:  M420 S0 Z0.00
2021-03-28 02:34:54,082 - Recv: echo:Material heatup parameters:
2021-03-28 02:34:54,085 - Recv: echo:  M145 S0 H185 B45 F255
2021-03-28 02:34:54,087 - Recv:   M145 S1 H240 B70 F255
2021-03-28 02:34:54,089 - Recv: echo:PID settings:
2021-03-28 02:34:54,092 - Recv: echo:  M301 P22.57 I1.72 D73.96
2021-03-28 02:34:54,094 - Recv: echo:Z-Probe Offset (mm):
2021-03-28 02:34:54,101 - Recv: echo:  M851 Z0.00
2021-03-28 02:34:59,458 - Recv: Error:STOP called because of BLTouch error - restart with M999
2021-03-28 02:34:59,490 - Recv: Error:Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)
2021-03-28 02:35:00,741 - Recv: echo:TF card ok
2021-03-28 02:35:00,756 - Recv: Init power off infomation.
2021-03-28 02:35:00,759 - Recv: size:
2021-03-28 02:35:00,761 - Recv: 585
2021-03-28 02:35:30,812 - Communication timeout while idle, trying to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
2021-03-28 02:35:30,821 - Send: N1 M115*39
2021-03-28 02:35:32,818 - Communication timeout while idle, trying to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
2021-03-28 02:35:32,826 - Send: N2 M21*18
2021-03-28 02:35:34,822 - No response from printer after 3 consecutive communication timeouts, considering it dead. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
2021-03-28 02:35:34,844 - Changing monitoring state from "Operational" to "Offline (Error: Too many consecutive timeouts, printer still connected and alive?)"
2021-03-28 02:35:34,854 - Connection closed, closing down monitor