2023-03-27 15:47:14,397 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-27 15:47:14,430 - octoprint.server - INFO - --- Log roll over detected --------------------------------------------------- 2023-03-27 15:47:14,431 - octoprint.server - INFO - OctoPrint 1.8.7 2023-03-27 15:47:14,437 - octoprint.plugin.core - INFO - 36 plugin(s) registered with the system: | ABL Expert Plugin (0.6) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_ABL_Expert | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/appkeys | Backup & Restore (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/backup | Bed Visualizer (1.1.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_bedlevelvisualizer | Calibration Tools (1.0.4) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_CalibrationTools | Core Wizard (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/corewizard | !Detailed Progress (0.2.7) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_detailedprogress | Discovery (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/discovery | DisplayLayerProgress Plugin (1.28.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_DisplayLayerProgress | DisplayZ (0.2.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_displayz | Error Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/errortracking | Event Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/eventmanager | Filament Manager (1.9.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_filamentmanager | File Check (2021.2.23) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_file_check | Firmware Check (2021.10.11) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmware_check | Firmware Updater (1.14.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmwareupdater | GCode Viewer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/gcodeviewer | HeaterTimeout (0.0.4) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_HeaterTimeout | Logging (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/logging | Navbar Temperature Plugin (0.15) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_navbartemp | Octoprint Display ETA (2.2.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_display_eta | Pi Support Plugin (2022.6.13) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/pluginmanager | Preheat Button (0.8.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_preheat | Print History Plugin (1.3) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_printhistory | Printer Stats (3.1.3) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_stats | Simple Emergency Stop (1.0.5) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_simpleemergencystop | Software Update (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/softwareupdate | Touchtest Plugin (0.4.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_touchtest | UI Customizer (0.1.9.2) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_uicustomizer | Virtual Printer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/virtual_printer | Z Probe Offset (0.5) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_z_probe_offset Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2023-03-27 15:47:14,459 - octoprint.environment - INFO - Detected environment is Python 3.9.2 under Linux (linux). Details: | hardware: | cores: 4 | freq: 1200.0 | ram: 912883712 | os: | bits: 32 | id: linux | platform: linux | plugins: | pi_support: | model: Raspberry Pi 3 Model B Rev 1.2 | octopi_version: 1.0.0 | throttle_check_enabled: true | throttle_check_functional: true | throttle_state: '0x0' | python: | pip: '22.3' | version: 3.9.2 | virtualenv: /home/pi/oprint 2023-03-27 15:47:14,459 - octoprint.server - INFO - ------------------------------------------------------------------------------ 2023-03-27 15:47:30,971 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 234023, 'printer_state': 'PRINTING'} 2023-03-27 16:02:14,399 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-27 16:02:31,422 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 234923, 'printer_state': 'PRINTING'} 2023-03-27 16:17:14,400 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-27 16:17:30,959 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 235823, 'printer_state': 'PRINTING'} 2023-03-27 16:32:14,402 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-27 16:32:30,951 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 236723, 'printer_state': 'PRINTING'} 2023-03-27 16:47:14,404 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-27 16:47:30,982 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 237623, 'printer_state': 'PRINTING'} 2023-03-27 17:02:14,406 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-27 17:02:31,157 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 238523, 'printer_state': 'PRINTING'} 2023-03-27 17:17:14,409 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-27 17:17:31,414 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 239423, 'printer_state': 'PRINTING'} 2023-03-27 17:32:14,411 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-27 17:32:31,099 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 240323, 'printer_state': 'PRINTING'} 2023-03-27 17:47:14,413 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-27 17:47:31,074 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 241223, 'printer_state': 'PRINTING'} 2023-03-27 18:02:14,415 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-27 18:02:31,030 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 242123, 'printer_state': 'PRINTING'} 2023-03-27 18:17:14,416 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-27 18:17:31,064 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 243023, 'printer_state': 'PRINTING'} 2023-03-27 18:32:14,418 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-27 18:32:31,086 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 243923, 'printer_state': 'PRINTING'} 2023-03-27 18:47:14,419 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-27 18:47:31,100 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 244823, 'printer_state': 'PRINTING'} 2023-03-27 19:02:14,420 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-27 19:02:31,111 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 245723, 'printer_state': 'PRINTING'} 2023-03-27 19:17:14,423 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-27 19:17:31,084 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 246623, 'printer_state': 'PRINTING'} 2023-03-27 19:32:14,425 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-27 19:32:31,142 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 247523, 'printer_state': 'PRINTING'} 2023-03-27 19:47:14,426 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-27 19:47:31,102 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 248423, 'printer_state': 'PRINTING'} 2023-03-27 20:02:14,428 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-27 20:02:31,130 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 249323, 'printer_state': 'PRINTING'} 2023-03-27 20:17:14,430 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-27 20:17:31,146 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 250223, 'printer_state': 'PRINTING'} 2023-03-27 20:32:14,432 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-27 20:32:31,270 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 251123, 'printer_state': 'PRINTING'} 2023-03-27 20:47:14,434 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-27 20:47:31,181 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 252023, 'printer_state': 'PRINTING'} 2023-03-27 21:02:14,436 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-27 21:02:31,241 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 252923, 'printer_state': 'PRINTING'} 2023-03-27 21:17:14,438 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-27 21:17:31,302 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 253823, 'printer_state': 'PRINTING'} 2023-03-27 21:32:14,441 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-27 21:32:31,186 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 254723, 'printer_state': 'PRINTING'} 2023-03-27 21:47:14,444 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-27 21:47:31,203 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 255623, 'printer_state': 'PRINTING'} 2023-03-27 22:02:14,446 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-27 22:02:31,187 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 256523, 'printer_state': 'PRINTING'} 2023-03-27 22:17:14,448 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-27 22:17:31,224 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 257423, 'printer_state': 'PRINTING'} 2023-03-27 22:32:14,451 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-27 22:32:31,227 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 258323, 'printer_state': 'PRINTING'} 2023-03-27 22:47:14,453 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-27 22:47:28,304 - octoprint.plugins.tracking - INFO - Sent tracking event pong, payload: {'version': '1.8.7', 'os': 'linux', 'bits': 32, 'python': '3.9.2', 'pip': '22.3', 'cores': 4, 'freq': 1200.0, 'ram': 912883712, 'pi_model': 'Raspberry Pi 3 Model B Rev 1.2', 'octopi_version': '1.0.0', 'plugins': 'z_probe_offset:0.5,uicustomizer:0.1.9.2,preheat:0.8.0,touchtest:0.4.1,stats:3.1.3,simpleemergencystop:1.0.5,printhistory:1.3,navbartemp:0.15,heatertimeout:0.0.4,firmwareupdater:1.14.0,filamentmanager:1.9.1,displayz:0.2.0,display_eta:2.2.0,calibrationtools:1.0.4,displaylayerprogress:1.28.0,bedlevelvisualizer:1.1.1,abl_expert:0.6'} 2023-03-27 22:47:31,238 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 259223, 'printer_state': 'PRINTING'} 2023-03-27 22:58:57,011 - octoprint.util.comm - INFO - Finished in 29239.944 s. 2023-03-27 22:58:57,013 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Finishing" 2023-03-27 22:58:57,030 - octoprint.printer.standard.job - INFO - Print job done - origin: local, path: Fire 7 (2022).gcode, owner: jdthomas24 2023-03-27 22:58:57,181 - octoprint.plugins.DisplayLayerProgress - INFO - Printing stopped. Detailed progress stopped. 2023-03-27 22:58:57,192 - octoprint.plugins.filamentmanager - INFO - Updating Filament usage for octoprint configured toolcount: 1 2023-03-27 22:58:57,193 - octoprint.plugins.filamentmanager - INFO - Filament tracked toolcount: 1 2023-03-27 22:58:57,196 - octoprint.plugins.filamentmanager - INFO - Filament tracked values: [30713.043600013963] 2023-03-27 22:58:57,197 - octoprint.plugins.filamentmanager - INFO - Filament used: 30713.043600013963 mm (tool0) 2023-03-27 22:58:57,215 - octoprint.plugins.filamentmanager - WARNING - No selected spool for tool0 2023-03-27 22:58:57,250 - octoprint.plugins.printhistory - INFO - Name: Fire 7 (2022).gcode 2023-03-27 22:58:57,251 - octoprint.plugins.printhistory - INFO - Origin: local 2023-03-27 22:58:57,251 - octoprint.plugins.printhistory - INFO - Path: Fire 7 (2022).gcode 2023-03-27 22:58:57,272 - octoprint.plugins.printhistory - INFO - Path_On_disk: /home/pi/.octoprint/uploads/Fire 7 (2022).gcode 2023-03-27 22:58:57,283 - octoprint.plugins.printhistory - INFO - Got metadata from name 2023-03-27 22:58:57,284 - octoprint.plugins.printhistory - INFO - found fileData 2023-03-27 22:58:57,311 - octoprint.plugins.printhistory - INFO - {"processName": "PETG Ender 3 PRO", "applyToModels": "Fire 7 (2022)", "profileName": "Tablets 11/2018 (modified)", "profileVersion": "2022-04-13 11:04:31", "baseProfile": "Creality CR-10(2)", "printMaterial": "", "printQuality": "", "printExtruders": "", "extruderName": "Primary Extruder", "extruderToolheadNumber": "0", "extruderDiameter": "0.4", "extruderAutoWidth": "0", "extruderWidth": "0.4", "extrusionMultiplier": "1", "extruderUseRetract": "1", "extruderRetractionDistance": "5", "extruderExtraRestartDistance": "0", "extruderRetractionZLift": "0", "extruderRetractionSpeed": "1000", "extruderUseCoasting": "1", "extruderCoastingDistance": "0.2", "extruderUseWipe": "0", "extruderWipeDistance": "5", "primaryExtruder": "0", "layerHeight": "0.2", "topSolidLayers": "4", "bottomSolidLayers": "4", "perimeterOutlines": "3", "printPerimetersInsideOut": "1", "startPointOption": "2", "startPointOriginX": "0", "startPointOriginY": "0", "sequentialIslands": "0", "spiralVaseMode": "0", "firstLayerHeightPercentage": "100", "firstLayerWidthPercentage": "100", "firstLayerUnderspeed": "0.5", "useRaft": "0", "raftExtruder": "0", "raftTopLayers": "3", "raftBaseLayers": "2", "raftOffset": "3", "raftSeparationDistance": "0.14", "raftTopInfill": "100", "aboveRaftSpeedMultiplier": "0.3", "useSkirt": "0", "skirtExtruder": "0", "skirtLayers": "1", "skirtOutlines": "5", "skirtOffset": "0", "usePrimePillar": "0", "primePillarExtruder": "999", "primePillarWidth": "12", "primePillarLocation": "7", "primePillarSpeedMultiplier": "1", "useOozeShield": "0", "oozeShieldExtruder": "999", "oozeShieldOffset": "2", "oozeShieldOutlines": "1", "oozeShieldSidewallShape": "1", "oozeShieldSidewallAngle": "30", "oozeShieldSpeedMultiplier": "1", "infillExtruder": "0", "internalInfillPattern": "Rectilinear", "externalInfillPattern": "Rectilinear", "infillPercentage": "20", "outlineOverlapPercentage": "15", "infillExtrusionWidthPercentage": "100", "minInfillLength": "5", "infillLayerInterval": "1", "internalInfillAngles": "45,-45", "overlapInternalInfillAngles": "0", "externalInfillAngles": "45,-45", "generateSupport": "1", "supportExtruder": "0", "supportInfillPercentage": "25", "supportExtraInflation": "0", "supportBaseLayers": "0", "denseSupportExtruder": "0", "denseSupportLayers": "0", "denseSupportInfillPercentage": "55", "supportLayerInterval": "1", "supportHorizontalPartOffset": "0.42", "supportUpperSeparationLayers": "1", "supportLowerSeparationLayers": "1", "supportType": "0", "supportGridSpacing": "1", "maxOverhangAngle": "45", "supportAngles": "0", "temperatureName": "Primary Extruder,Heated Bed", "temperatureNumber": "0,0", "temperatureSetpointCount": "1,1", "temperatureSetpointLayers": "1,1", "temperatureSetpointTemperatures": "215,60", "temperatureStabilizeAtStartup": "1,1", "temperatureHeatedBed": "0,1", "fanLayers": "1,2,15", "fanSpeeds": "0,10,60", "blipFanToFullPower": "0", "adjustSpeedForCooling": "1", "minSpeedLayerTime": "15", "minCoolingSpeedSlowdown": "20", "increaseFanForCooling": "0", "minFanLayerTime": "45", "maxCoolingFanSpeed": "100", "increaseFanForBridging": "0", "bridgingFanSpeed": "100", "use5D": "1", "relativeEdistances": "0", "allowEaxisZeroing": "1", "independentExtruderAxes": "0", "includeM10123": "0", "stickySupport": "1", "applyToolheadOffsets": "0", "gcodeXoffset": "0", "gcodeYoffset": "0", "gcodeZoffset": "0", "overrideMachineDefinition": "1", "machineTypeOverride": "0", "strokeXoverride": "300", "strokeYoverride": "300", "strokeZoverride": "400", "originOffsetXoverride": "0", "originOffsetYoverride": "0", "originOffsetZoverride": "0", "homeXdirOverride": "-1", "homeYdirOverride": "-1", "homeZdirOverride": "-1", "flipXoverride": "1", "flipYoverride": "-1", "flipZoverride": "1", "toolheadOffsets": "0,0|0,0|0,0|0,0|0,0|0,0", "overrideFirmwareConfiguration": "1", "firmwareTypeOverride": "RepRap (Marlin/Repetier/Sprinter)", "GPXconfigOverride": "r2", "baudRateOverride": "115200", "overridePrinterModels": "1", "startingGcode": "G28", "layerChangeGcode": "", "retractionGcode": "", "toolChangeGcode": "", "endingGcode": "M104 S0", "exportFileFormat": "gcode", "celebration": "0", "celebrationSong": "Random Song", "postProcessing": "", "defaultSpeed": "3200", "outlineUnderspeed": "0.5", "solidInfillUnderspeed": "0.8", "supportUnderspeed": "0.8", "rapidXYspeed": "3200", "rapidZspeed": "1000", "minBridgingArea": "50", "bridgingExtraInflation": "0", "bridgingExtrusionMultiplier": "1", "bridgingSpeedMultiplier": "1", "useFixedBridgingAngle": "0", "fixedBridgingAngle": "0", "applyBridgingToPerimeters": "0", "filamentDiameters": "1.75|1.75|1.75|1.75|1.75|1.75", "filamentPricesPerKg": "15|46|46|46|46|46", "filamentDensities": "1.25|1.25|1.25|1.25|1.25|1.25", "useMinPrintHeight": "1", "minPrintHeight": "0", "useMaxPrintHeight": "0", "maxPrintHeight": "13.73", "useDiaphragm": "0", "diaphragmLayerInterval": "20", "robustSlicing": "1", "mergeAllIntoSolid": "0", "onlyRetractWhenCrossingOutline": "1", "retractBetweenLayers": "1", "useRetractionMinTravel": "0", "retractionMinTravel": "3", "retractWhileWiping": "0", "onlyWipeOutlines": "1", "avoidCrossingOutline": "0", "maxMovementDetourFactor": "3", "toolChangeRetractionDistance": "12", "toolChangeExtraRestartDistance": "-0.5", "toolChangeRetractionSpeed": "600", "externalThinWallType": "0", "internalThinWallType": "0", "thinWallAllowedOverlapPercentage": "7", "singleExtrusionMinLength": "1", "singleExtrusionMinPrintingWidthPercentage": "50", "singleExtrusionMaxPrintingWidthPercentage": "200", "singleExtrusionEndpointExtension": "0.2", "horizontalSizeCompensation": "0", "Material cost": "1.38", "Plastic weight": "92.31 g (0.20 lb)", "Plastic volume": "73849.47 mm^3 (73.85 cc)", "Filament length": "30703.0 mm (30.70 m)", "Build time": "7 hours 17 minutes", "slicer_name": "simplify3d", "slicer_version": "4.1.2"} 2023-03-27 22:58:57,331 - octoprint.util.comm - INFO - Changing monitoring state from "Finishing" to "Operational" 2023-03-27 22:58:57,353 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2023-03-27 22:58:57,428 - octoprint.plugins.printhistory - INFO - fileData not found 2023-03-27 22:58:57,803 - octoprint.plugins.tracking - INFO - Sent tracking event print_done, payload: {'origin': 'local', 'file': '1bab9cd6af39071b41485ea436a209bcb54bdefd', 'elapsed': 29239} 2023-03-27 23:02:14,455 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-27 23:02:31,247 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 260123, 'printer_state': 'OPERATIONAL'} 2023-03-27 23:17:14,458 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-27 23:17:31,259 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 261023, 'printer_state': 'OPERATIONAL'} 2023-03-27 23:32:14,460 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-27 23:32:31,275 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 261923, 'printer_state': 'OPERATIONAL'} 2023-03-27 23:47:14,463 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-27 23:47:31,272 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 262823, 'printer_state': 'OPERATIONAL'} 2023-03-28 00:02:14,465 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-28 00:02:31,296 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 263723, 'printer_state': 'OPERATIONAL'} 2023-03-28 00:17:14,467 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-28 00:17:31,464 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 264623, 'printer_state': 'OPERATIONAL'} 2023-03-28 00:32:14,470 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-28 00:32:31,379 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 265523, 'printer_state': 'OPERATIONAL'} 2023-03-28 00:47:14,472 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-28 00:47:31,340 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 266423, 'printer_state': 'OPERATIONAL'} 2023-03-28 00:55:28,243 - octoprint.access.users - INFO - Cleaning up user session 4F221EFC08A94FF5B133AB3A0AFC6442 for user jdthomas24 2023-03-28 00:55:28,245 - octoprint.access.users - INFO - Logged out user: jdthomas24 2023-03-28 00:55:28,315 - octoprint.server.util.flask - INFO - Passively logging in user jdthomas24 from ::ffff:192.168.1.33 2023-03-28 00:55:28,316 - octoprint.access.users - INFO - Logged in user: jdthomas24 2023-03-28 00:55:28,330 - octoprint.plugins.uicustomizer - INFO - Checking for updated themes 2023-03-28 00:55:28,496 - octoprint.server.util.flask - INFO - Passively logging in user jdthomas24 from ::ffff:192.168.1.33 2023-03-28 00:55:28,496 - octoprint.access.users - INFO - Logged in user: jdthomas24 2023-03-28 00:55:28,584 - octoprint.server.util.flask - INFO - Passively logging in user jdthomas24 from ::ffff:192.168.1.33 2023-03-28 00:55:28,585 - octoprint.access.users - INFO - Logged in user: jdthomas24 2023-03-28 00:55:32,065 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.33 2023-03-28 00:55:32,167 - octoprint.server.util.flask - INFO - Passively logging in user jdthomas24 from ::ffff:192.168.1.33 2023-03-28 00:55:32,169 - octoprint.access.users - INFO - Logged in user: jdthomas24 2023-03-28 00:55:33,184 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json 2023-03-28 00:55:43,193 - octoprint.plugins.announcements - INFO - Loaded channel _important from https://octoprint.org/feeds/important.xml in 0.58s 2023-03-28 00:55:43,818 - octoprint.plugins.announcements - INFO - Loaded channel _releases from https://octoprint.org/feeds/releases.xml in 0.55s 2023-03-28 00:55:44,505 - octoprint.plugins.announcements - INFO - Loaded channel _blog from https://octoprint.org/feeds/octoblog.xml in 0.55s 2023-03-28 00:55:50,200 - octoprint.plugins.announcements - INFO - Loaded channel _plugins from https://plugins.octoprint.org/feed.xml in 5.6s 2023-03-28 00:55:50,913 - octoprint.plugins.announcements - INFO - Loaded channel _octopi from https://octoprint.org/feeds/octopi.xml in 0.56s 2023-03-28 00:55:51,255 - octoprint.server.util.sockjs - INFO - User jdthomas24 logged in on the socket from client ::ffff:192.168.1.33 2023-03-28 00:55:52,171 - octoprint.plugins.pluginmanager - INFO - Loaded plugin notices data from https://plugins.octoprint.org/notices.json 2023-03-28 00:55:55,181 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk 2023-03-28 00:56:01,004 - octoprint.plugins.tracking - INFO - Sent tracking event webui_load, payload: {'browser_name': 'Silk', 'browser_version': '104.3.37', 'os_name': 'Android', 'os_version': '5.1.1'} 2023-03-28 00:56:12,517 - octoprint.printer.standard.job - INFO - Print job selected - origin: local, path: Samsung GTab A7 8.7%22.gcode, owner: jdthomas24, user: jdthomas24 2023-03-28 00:56:12,569 - octoprint.plugins.DisplayLayerProgress - INFO - File '/home/pi/.octoprint/uploads/Samsung GTab A7 8.7%22.gcode' selected. Determining number of layers. 2023-03-28 00:56:12,585 - octoprint.plugins.DisplayLayerProgress - INFO - Read total height from MetaFile 2023-03-28 00:56:12,650 - octoprint.util.comm - INFO - Starting job on behalf of user jdthomas24 2023-03-28 00:56:12,664 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting" 2023-03-28 00:56:12,671 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: Samsung GTab A7 8.7%22.gcode, owner: jdthomas24, user: jdthomas24 2023-03-28 00:56:13,218 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2023-03-28 00:56:13,242 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Printing" 2023-03-28 00:56:14,005 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile 2023-03-28 00:56:14,085 - octoprint.plugins.DisplayLayerProgress - INFO - File select-event processing done!' 2023-03-28 00:56:14,304 - octoprint.plugins.DisplayLayerProgress - INFO - Printing started. Detailed progress started.{'name': 'Samsung GTab A7 8.7%22.gcode', 'path': 'Samsung GTab A7 8.7%22.gcode', 'origin': 'local', 'size': 3338743, 'owner': 'jdthomas24', 'user': 'jdthomas24'} 2023-03-28 00:56:14,349 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2023-03-28 00:56:14,841 - octoprint.plugins.tracking - INFO - Sent tracking event print_started, payload: {'origin': 'local', 'file': '55026b61581a880f66a3c9f7b71758592f839187'} 2023-03-28 01:02:14,474 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-28 01:02:31,341 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 267323, 'printer_state': 'PRINTING'} 2023-03-28 01:17:14,476 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-28 01:17:31,336 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 268223, 'printer_state': 'PRINTING'} 2023-03-28 01:32:14,479 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-28 01:32:31,367 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 269123, 'printer_state': 'PRINTING'} 2023-03-28 01:47:14,481 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-28 01:47:31,409 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 270023, 'printer_state': 'PRINTING'} 2023-03-28 02:02:14,483 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-28 02:02:31,350 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 270923, 'printer_state': 'PRINTING'} 2023-03-28 02:17:14,485 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-28 02:17:31,399 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 271823, 'printer_state': 'PRINTING'} 2023-03-28 02:32:14,486 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-28 02:32:31,402 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 272723, 'printer_state': 'PRINTING'} 2023-03-28 02:47:14,488 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-28 02:47:31,451 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 273623, 'printer_state': 'PRINTING'} 2023-03-28 03:02:14,491 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-28 03:02:31,411 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 274523, 'printer_state': 'PRINTING'} 2023-03-28 03:17:14,493 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-28 03:17:31,394 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 275423, 'printer_state': 'PRINTING'} 2023-03-28 03:32:14,495 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-28 03:32:31,430 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 276323, 'printer_state': 'PRINTING'} 2023-03-28 03:47:14,498 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-28 03:47:31,443 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 277223, 'printer_state': 'PRINTING'} 2023-03-28 04:02:14,501 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-28 04:02:31,542 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 278123, 'printer_state': 'PRINTING'} 2023-03-28 04:17:14,503 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-28 04:17:31,612 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 279023, 'printer_state': 'PRINTING'} 2023-03-28 04:32:14,505 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-28 04:32:31,671 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 279923, 'printer_state': 'PRINTING'} 2023-03-28 04:32:46,303 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.33 2023-03-28 04:47:14,507 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-28 04:47:31,505 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 280823, 'printer_state': 'PRINTING'} 2023-03-28 05:02:14,510 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-28 05:02:31,495 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 281723, 'printer_state': 'PRINTING'} 2023-03-28 05:17:14,512 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-28 05:17:31,511 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 282623, 'printer_state': 'PRINTING'} 2023-03-28 05:32:14,514 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-28 05:32:31,535 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 283523, 'printer_state': 'PRINTING'} 2023-03-28 05:47:14,516 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-28 05:47:31,504 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 284423, 'printer_state': 'PRINTING'} 2023-03-28 06:02:14,519 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-28 06:02:31,545 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 285323, 'printer_state': 'PRINTING'} 2023-03-28 06:17:14,522 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-28 06:17:31,550 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 286223, 'printer_state': 'PRINTING'} 2023-03-28 06:32:14,525 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-28 06:32:31,528 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 287123, 'printer_state': 'PRINTING'} 2023-03-28 06:47:14,527 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-28 06:47:31,553 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 288023, 'printer_state': 'PRINTING'} 2023-03-28 07:02:14,529 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-28 07:02:32,021 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 288923, 'printer_state': 'PRINTING'} 2023-03-28 07:17:14,531 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-28 07:17:31,577 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 289823, 'printer_state': 'PRINTING'} 2023-03-28 07:20:55,249 - octoprint.startup - INFO - ****************************************************************************** 2023-03-28 07:20:55,254 - octoprint.startup - INFO - Starting OctoPrint 1.8.7 2023-03-28 07:20:55,262 - octoprint.startup - INFO - ****************************************************************************** 2023-03-28 07:20:56,262 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: online 2023-03-28 07:20:56,263 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 1.1.1.1:53 is working 2023-03-28 07:20:56,263 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is working 2023-03-28 07:20:56,316 - octoprint.startup - INFO - Unable to fetch plugin blacklist from https://plugins.octoprint.org/blacklist.json, proceeding without it: HTTPSConnectionPool(host='plugins.octoprint.org', port=443): Max retries exceeded with url: /blacklist.json (Caused by NewConnectionError(': Failed to establish a new connection: [Errno -3] Temporary failure in name resolution')) 2023-03-28 07:20:56,316 - octoprint.startup - INFO - Blacklist processing done 2023-03-28 07:20:56,337 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2023-03-28 15:21:41,134 - octoprint.plugin.core - INFO - Plugin Detailed Progress (0.2.7) is disabled. 2023-03-28 15:21:41,778 - octoprint.plugins.errortracking - INFO - Initialized error tracking 2023-03-28 15:21:41,984 - octoprint.plugin.core - INFO - Found 36 plugin(s) providing 35 mixin implementations, 75 hook handlers 2023-03-28 15:21:42,454 - octoprint.server.heartbeat - INFO - Starting server heartbeat, 900.0s interval 2023-03-28 15:21:42,708 - octoprint.server - INFO - Intermediary server started 2023-03-28 15:21:42,752 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/pi/.octoprint/uploads... 2023-03-28 15:21:42,824 - octoprint.filemanager.storage - INFO - ... file metadata for /home/pi/.octoprint/uploads initialized successfully. 2023-03-28 15:21:42,833 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_SHOW (needs: "Need(method='role', value='plugin_action_command_notification_show')") 2023-03-28 15:21:42,834 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_CLEAR (needs: "Need(method='role', value='plugin_action_command_notification_clear')") 2023-03-28 15:21:42,835 - octoprint.server - INFO - Added new permission from plugin action_command_prompt: PLUGIN_ACTION_COMMAND_PROMPT_INTERACT (needs: "Need(method='role', value='plugin_action_command_prompt_interact')") 2023-03-28 15:21:42,836 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_READ (needs: "Need(method='role', value='plugin_announcements_read')") 2023-03-28 15:21:42,837 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_MANAGE (needs: "Need(method='role', value='plugin_announcements_manage'), Need(method='role', value='plugin_announcements_read')") 2023-03-28 15:21:42,838 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_ADMIN (needs: "Need(method='role', value='plugin_appkeys_admin')") 2023-03-28 15:21:42,841 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_GRANT (needs: "Need(method='role', value='plugin_appkeys_user')") 2023-03-28 15:21:42,843 - octoprint.server - INFO - Added new permission from plugin backup: PLUGIN_BACKUP_ACCESS (needs: "Need(method='role', value='plugin_backup_access')") 2023-03-28 15:21:42,850 - octoprint.server - INFO - Added new permission from plugin firmware_check: PLUGIN_FIRMWARE_CHECK_DISPLAY (needs: "Need(method='role', value='plugin_firmware_check_display')") 2023-03-28 15:21:42,852 - octoprint.server - INFO - Added new permission from plugin logging: PLUGIN_LOGGING_MANAGE (needs: "Need(method='role', value='plugin_logging_manage')") 2023-03-28 15:21:42,855 - octoprint.server - INFO - Added new permission from plugin pi_support: PLUGIN_PI_SUPPORT_STATUS (needs: "Need(method='role', value='plugin_pi_support_check')") 2023-03-28 15:21:42,858 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_LIST (needs: "Need(method='role', value='plugin_pluginmanager_list')") 2023-03-28 15:21:42,860 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_MANAGE (needs: "Need(method='role', value='plugin_pluginmanager_manage')") 2023-03-28 15:21:42,863 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_INSTALL (needs: "Need(method='role', value='plugin_pluginmanager_manage'), Need(method='role', value='plugin_pluginmanager_install')") 2023-03-28 15:21:42,865 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CHECK (needs: "Need(method='role', value='plugin_softwareupdate_check')") 2023-03-28 15:21:42,868 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_UPDATE (needs: "Need(method='role', value='plugin_softwareupdate_update')") 2023-03-28 15:21:42,871 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CONFIGURE (needs: "Need(method='role', value='plugin_softwareupdate_configure')") 2023-03-28 15:21:45,250 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2023-03-28 15:21:47,069 - octoprint.util.pip - INFO - Version of pip is 22.3 2023-03-28 15:21:47,081 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2023-03-28 15:21:47,082 - octoprint.util.pip - INFO - ==> pip ok -> yes 2023-03-28 15:21:47,485 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk 2023-03-28 15:21:47,516 - octoprint.plugins.softwareupdate - INFO - Loaded update log from disk 2023-03-28 15:21:47,749 - octoprint.plugins.firmwareupdater - INFO - Python binproto2 package installed: False 2023-03-28 15:21:48,128 - octoprint.plugin.core - INFO - Initialized 35 plugin implementation(s) 2023-03-28 15:21:48,518 - octoprint.plugins.uicustomizer - INFO - Downloaded theme: https://lazemss.github.io/OctoPrint-UICustomizerThemes/css/cyborg.css into: /home/pi/oprint/lib/python3.9/site-packages/octoprint_uicustomizer/static/themes/css/cyborg.css 2023-03-28 15:21:48,806 - octoprint.plugin.core - INFO - 36 plugin(s) registered with the system: | ABL Expert Plugin (0.6) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_ABL_Expert | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/appkeys | Backup & Restore (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/backup | Bed Visualizer (1.1.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_bedlevelvisualizer | Calibration Tools (1.0.4) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_CalibrationTools | Core Wizard (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/corewizard | !Detailed Progress (0.2.7) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_detailedprogress | Discovery (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/discovery | DisplayLayerProgress Plugin (1.28.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_DisplayLayerProgress | DisplayZ (0.2.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_displayz | Error Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/errortracking | Event Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/eventmanager | Filament Manager (1.9.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_filamentmanager | File Check (2021.2.23) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_file_check | Firmware Check (2021.10.11) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmware_check | Firmware Updater (1.14.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmwareupdater | GCode Viewer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/gcodeviewer | HeaterTimeout (0.0.4) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_HeaterTimeout | Logging (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/logging | Navbar Temperature Plugin (0.15) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_navbartemp | Octoprint Display ETA (2.2.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_display_eta | Pi Support Plugin (2022.6.13) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/pluginmanager | Preheat Button (0.8.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_preheat | Print History Plugin (1.3) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_printhistory | Printer Stats (3.1.3) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_stats | Simple Emergency Stop (1.0.5) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_simpleemergencystop | Software Update (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/softwareupdate | Touchtest Plugin (0.4.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_touchtest | UI Customizer (0.1.9.2) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_uicustomizer | Virtual Printer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/virtual_printer | Z Probe Offset (0.5) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_z_probe_offset Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2023-03-28 15:21:48,870 - octoprint.environment - INFO - Detected environment is Python 3.9.2 under Linux (linux). Details: | hardware: | cores: 4 | freq: 1200.0 | ram: 912883712 | os: | bits: 32 | id: linux | platform: linux | plugins: | pi_support: | model: Raspberry Pi 3 Model B Rev 1.2 | octopi_version: 1.0.0 | throttle_check_enabled: true | throttle_check_functional: true | throttle_state: '0x0' | python: | pip: '22.3' | version: 3.9.2 | virtualenv: /home/pi/oprint 2023-03-28 15:21:48,901 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/webassets... 2023-03-28 15:21:48,903 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-cache... 2023-03-28 15:21:48,905 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-manifest.json... 2023-03-28 15:21:48,984 - octoprint.server.util.flask.collect_plugin_assets - WARNING - Plugin simpleemergencystop is referring to non existing css asset css/fontawesome.all.min.css 2023-03-28 15:21:49,200 - octoprint.plugins.DisplayLayerProgress - WARNING - The Blueprint of this plugin is relying on the default implementation of is_blueprint_csrf_protected (newly added in OctoPrint 1.8.3), which in a future version will be switched from False to True for security reasons. Plugin authors should ensure they explicitly declare the CSRF protection status in their BlueprintPlugin mixin implementation. Recommendation is to enable CSRF protection and exempt views that must not use it with the octoprint.plugin.BlueprintPlugin.csrf_exempt decorator. 2023-03-28 15:21:49,201 - octoprint.server - WARNING - CSRF Protection for Blueprint of plugin DisplayLayerProgress is DISABLED 2023-03-28 15:21:49,205 - octoprint.plugins.bedlevelvisualizer - WARNING - The Blueprint of this plugin is relying on the default implementation of is_blueprint_csrf_protected (newly added in OctoPrint 1.8.3), which in a future version will be switched from False to True for security reasons. Plugin authors should ensure they explicitly declare the CSRF protection status in their BlueprintPlugin mixin implementation. Recommendation is to enable CSRF protection and exempt views that must not use it with the octoprint.plugin.BlueprintPlugin.csrf_exempt decorator. 2023-03-28 15:21:49,208 - octoprint.server - WARNING - CSRF Protection for Blueprint of plugin bedlevelvisualizer is DISABLED 2023-03-28 15:21:49,212 - octoprint.plugins.filamentmanager - WARNING - The Blueprint of this plugin is relying on the default implementation of is_blueprint_csrf_protected (newly added in OctoPrint 1.8.3), which in a future version will be switched from False to True for security reasons. Plugin authors should ensure they explicitly declare the CSRF protection status in their BlueprintPlugin mixin implementation. Recommendation is to enable CSRF protection and exempt views that must not use it with the octoprint.plugin.BlueprintPlugin.csrf_exempt decorator. 2023-03-28 15:21:49,214 - octoprint.server - WARNING - CSRF Protection for Blueprint of plugin filamentmanager is DISABLED 2023-03-28 15:21:49,220 - octoprint.plugins.printhistory - WARNING - The Blueprint of this plugin is relying on the default implementation of is_blueprint_csrf_protected (newly added in OctoPrint 1.8.3), which in a future version will be switched from False to True for security reasons. Plugin authors should ensure they explicitly declare the CSRF protection status in their BlueprintPlugin mixin implementation. Recommendation is to enable CSRF protection and exempt views that must not use it with the octoprint.plugin.BlueprintPlugin.csrf_exempt decorator. 2023-03-28 15:21:49,222 - octoprint.server - WARNING - CSRF Protection for Blueprint of plugin printhistory is DISABLED 2023-03-28 15:21:50,132 - octoprint.plugins.firmwareupdater - INFO - Setting maximum upload size for /flash to 5243904 2023-03-28 15:21:50,133 - octoprint.server - INFO - Shutting down intermediary server... 2023-03-28 15:21:50,326 - octoprint.server - INFO - Intermediary server shut down 2023-03-28 15:21:50,334 - octoprint.events - INFO - Processing startup event, this is our first event 2023-03-28 15:21:50,335 - octoprint.events - INFO - Adding 1 events to queue that were held back before startup event 2023-03-28 15:21:50,336 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue... 2023-03-28 15:21:50,344 - octoprint.server - INFO - Autoconnect on startup is configured, trying to connect to the printer... 2023-03-28 15:21:50,368 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue 2023-03-28 15:21:50,425 - octoprint.server - INFO - Trying to connect to configured serial port None 2023-03-28 15:21:50,765 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2023-03-28 15:21:50,776 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder... 2023-03-28 15:21:50,783 - octoprint.server.util.watchdog - INFO - ... initial scan done. 2023-03-28 15:21:50,813 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 7 port/baudrate candidates: /dev/ttyUSB0@115200, /dev/ttyUSB0@250000, /dev/ttyUSB0@230400, /dev/ttyUSB0@57600, /dev/ttyUSB0@38400, /dev/ttyUSB0@19200, /dev/ttyUSB0@9600 2023-03-28 15:21:50,825 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200 2023-03-28 15:21:50,842 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200 2023-03-28 15:21:50,946 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2023-03-28 15:21:50,956 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2023-03-28 15:21:50,968 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Operational" 2023-03-28 15:21:50,989 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2023-03-28 15:21:51,027 - octoprint.plugins.firmwareupdater - INFO - Got CONNECTED event 2023-03-28 15:21:51,043 - octoprint.plugins.firmwareupdater - INFO - Run postflash flag is not set 2023-03-28 15:21:51,046 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2023-03-28 15:21:51,145 - octoprint.util.comm - INFO - Printer reports firmware name "1.0.13" 2023-03-28 15:21:51,175 - octoprint.plugins.firmwareupdater - INFO - Setting BINARY_FILE_TRANSFER capability to False 2023-03-28 15:21:51,186 - octoprint.plugins.ABL_Expert - INFO - self.printer_cap[eeprom] is now 1 2023-03-28 15:21:51,194 - octoprint.plugins.z_probe_offset - INFO - Printer_cap[eeprom]:1 2023-03-28 15:21:51,203 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting 2023-03-28 15:21:51,218 - octoprint.plugins.ABL_Expert - INFO - self.printer_cap[autolevel] is now 1 2023-03-28 15:21:51,228 - octoprint.plugins.ABL_Expert - INFO - self.printer_cap[z_probe] is now 1 2023-03-28 15:21:51,229 - octoprint.plugins.z_probe_offset - INFO - Printer_cap[z_probe]:1 2023-03-28 15:21:51,236 - octoprint.plugins.ABL_Expert - INFO - self.printer_cap[leveling_data] is now 1 2023-03-28 15:21:51,259 - octoprint.util.comm - INFO - Firmware states that it supports emergency GCODEs to be sent without waiting for an acknowledgement first 2023-03-28 15:21:51,758 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance "CR10 Smart Pro 2"._http._tcp.local.' for _http._tcp.local. 2023-03-28 15:21:51,860 - octoprint.plugins.tracking - INFO - Sent tracking event system_unthrottled, payload: {'throttled_now': False, 'throttled_past': False, 'throttled_mask': 0, 'throttled_voltage_now': False, 'throttled_voltage_past': False, 'throttled_overheat_now': False, 'throttled_overheat_past': False} 2023-03-28 15:21:52,544 - octoprint.util.comm - INFO - Externally triggered heatup detected 2023-03-28 15:21:52,551 - octoprint.plugins.z_probe_offset - INFO - Z probe offset is now -3.82 2023-03-28 15:21:52,567 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {'firmware_name': '1.0.13', 'printer_port': None, 'printer_baudrate': 0} 2023-03-28 15:21:52,580 - octoprint.plugins.ABL_Expert - INFO - Grid mesh size is 5 2023-03-28 15:21:52,612 - octoprint.plugins.ABL_Expert - INFO - Grid mesh size is 13 2023-03-28 15:21:52,625 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance "CR10 Smart Pro 2"._octoprint._tcp.local.' for _octoprint._tcp.local. 2023-03-28 15:21:52,643 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance "CR10 Smart Pro 2" for SSDP 2023-03-28 15:21:52,730 - octoprint.server - INFO - Listening on http://127.0.0.1:5000 2023-03-28 15:21:52,839 - octoprint.plugins.z_probe_offset - INFO - Z probe offset is now -3.82 2023-03-28 15:21:53,116 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.33 2023-03-28 15:21:53,383 - octoprint.server.util.flask - INFO - Passively logging in user jdthomas24 from ::ffff:192.168.1.33 2023-03-28 15:21:53,385 - octoprint.access.users - INFO - Logged in user: jdthomas24 2023-03-28 15:21:53,407 - octoprint.plugins.uicustomizer - INFO - Checking for updated themes 2023-03-28 15:21:53,614 - octoprint.plugins.announcements - INFO - Loaded channel _important from https://octoprint.org/feeds/important.xml in 0.58s 2023-03-28 15:21:54,123 - octoprint.server.util.sockjs - INFO - User jdthomas24 logged in on the socket from client ::ffff:192.168.1.33 2023-03-28 15:21:54,124 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from https://plugins.octoprint.org/plugins.json 2023-03-28 15:21:54,913 - octoprint.plugins.announcements - INFO - Loaded channel _releases from https://octoprint.org/feeds/releases.xml in 0.82s 2023-03-28 15:21:55,056 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2023-03-28 15:21:55,058 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2023-03-28 15:21:55,058 - octoprint.util.pip - INFO - ==> pip ok -> yes 2023-03-28 15:21:55,164 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 23.9GB. That is considered sufficient for updating. 2023-03-28 15:21:55,181 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json 2023-03-28 15:21:56,645 - octoprint.plugins.announcements - INFO - Loaded channel _blog from https://octoprint.org/feeds/octoblog.xml in 0.85s 2023-03-28 15:21:57,128 - octoprint.plugins.HeaterTimeout - INFO - Starting up... 2023-03-28 15:21:57,148 - octoprint.plugins.bedlevelvisualizer - INFO - OctoPrint-BedLevelVisualizer loaded! 2023-03-28 15:21:57,824 - octoprint.plugins.stats - INFO - Printer Stats 2023-03-28 15:21:57,855 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 21, 'printer_state': 'OPERATIONAL'} 2023-03-28 15:21:57,864 - octoprint.plugins.uicustomizer - INFO - UI Customizer is initialized. 2023-03-28 15:21:58,496 - octoprint.plugins.announcements - INFO - Loaded channel _plugins from https://plugins.octoprint.org/feed.xml in 0.9s 2023-03-28 15:21:58,770 - octoprint.plugins.tracking - INFO - Sent tracking event pong, payload: {'version': '1.8.7', 'os': 'linux', 'bits': 32, 'python': '3.9.2', 'pip': '22.3', 'cores': 4, 'freq': 1200.0, 'ram': 912883712, 'pi_model': 'Raspberry Pi 3 Model B Rev 1.2', 'octopi_version': '1.0.0', 'plugins': 'z_probe_offset:0.5,uicustomizer:0.1.9.2,preheat:0.8.0,touchtest:0.4.1,stats:3.1.3,simpleemergencystop:1.0.5,printhistory:1.3,navbartemp:0.15,heatertimeout:0.0.4,firmwareupdater:1.14.0,filamentmanager:1.9.1,displayz:0.2.0,display_eta:2.2.0,calibrationtools:1.0.4,displaylayerprogress:1.28.0,bedlevelvisualizer:1.1.1,abl_expert:0.6'} 2023-03-28 15:21:59,662 - octoprint.plugins.tracking - INFO - Sent tracking event startup, payload: {'version': '1.8.7', 'os': 'linux', 'bits': 32, 'python': '3.9.2', 'pip': '22.3', 'cores': 4, 'freq': 1200.0, 'ram': 912883712, 'pi_model': 'Raspberry Pi 3 Model B Rev 1.2', 'octopi_version': '1.0.0'} 2023-03-28 15:21:59,956 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'http://192.168.1.249/', 'path': '/', 'query_string': 'l10n=en'} 2023-03-28 15:22:00,369 - octoprint.plugins.announcements - INFO - Loaded channel _octopi from https://octoprint.org/feeds/octopi.xml in 0.69s 2023-03-28 15:22:01,953 - octoprint.plugins.pluginmanager - INFO - Loaded plugin notices data from https://plugins.octoprint.org/notices.json 2023-03-28 15:22:12,516 - octoprint.server.util.flask - INFO - Passively logging in user jdthomas24 from ::ffff:192.168.1.49 2023-03-28 15:22:12,517 - octoprint.access.users - INFO - Logged in user: jdthomas24 2023-03-28 15:22:12,582 - octoprint.server.util.flask - INFO - Passively logging in user jdthomas24 from ::ffff:192.168.1.49 2023-03-28 15:22:12,583 - octoprint.access.users - INFO - Logged in user: jdthomas24 2023-03-28 15:22:12,696 - octoprint.server.util.flask - INFO - Passively logging in user jdthomas24 from ::ffff:192.168.1.49 2023-03-28 15:22:12,697 - octoprint.access.users - INFO - Logged in user: jdthomas24 2023-03-28 15:22:32,496 - octoprint.server.preemptive_cache - INFO - ... done in 32.54s 2023-03-28 15:22:32,602 - octoprint.server.views - INFO - Found path / in cache (key: ui:_default:http://192.168.1.249/:en), signaling as cached 2023-03-28 15:22:32,637 - octoprint.server.views - INFO - Found path / in cache (key: ui:_default:http://192.168.1.249/:en), signaling as cached 2023-03-28 15:22:33,225 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.49 2023-03-28 15:22:33,414 - octoprint.server.util.flask - INFO - Passively logging in user jdthomas24 from ::ffff:192.168.1.49 2023-03-28 15:22:33,415 - octoprint.access.users - INFO - Logged in user: jdthomas24 2023-03-28 15:22:39,314 - octoprint.server.util.sockjs - INFO - User jdthomas24 logged in on the socket from client ::ffff:192.168.1.49 2023-03-28 15:22:45,871 - octoprint.plugins.tracking - INFO - Sent tracking event webui_load, payload: {'browser_name': 'Chrome', 'browser_version': '111.0.0.0', 'os_name': 'Mac OS', 'os_version': '10.15.7'} 2023-03-28 15:22:58,150 - octoprint.plugins.DisplayLayerProgress - INFO - Limit of 750 reached and no M117 INDICATOR-Layer found 2023-03-28 15:22:58,152 - octoprint.plugins.DisplayLayerProgress - INFO - FilePreProcessor. Checking LayerExpressions. 2023-03-28 15:22:58,152 - octoprint.plugins.DisplayLayerProgress - INFO - FilePreProcessor. LayerExpression valid. Start processing... 2023-03-28 15:23:01,489 - octoprint.filemanager.analysis - INFO - Starting analysis of local:Samsung GTAB A7-8.7%22 2022.gcode 2023-03-28 15:23:01,511 - octoprint.filemanager.analysis - INFO - Invoking analysis command: /home/pi/oprint/bin/python -m octoprint analysis gcode --speed-x=6000 --speed-y=6000 --max-t=10 --throttle=0.0 --throttle-lines=100 --bed-z=0.0 /home/pi/.octoprint/uploads/Samsung GTAB A7-8.7%22 2022.gcode 2023-03-28 15:23:01,700 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2023-03-28 15:23:25,922 - octoprint.filemanager.analysis - INFO - Analysis of entry local:Samsung GTAB A7-8.7%22 2022.gcode finished, needed 24.43s 2023-03-28 15:23:25,953 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile 2023-03-28 15:23:25,975 - octoprint.plugins.DisplayLayerProgress - INFO - Did NOT reading total height from MetaFile, because analyse was done for not selected file. Current: '-' Analyse for: 'Samsung GTAB A7-8.7%22 2022.gcode' 2023-03-28 15:24:11,646 - octoprint.plugins.softwareupdate - INFO - Starting update of uicustomizer to 0.1.9.4... 2023-03-28 15:24:13,503 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2023-03-28 15:24:13,506 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2023-03-28 15:24:13,508 - octoprint.util.pip - INFO - ==> pip ok -> yes 2023-03-28 15:24:26,632 - octoprint.plugins.softwareupdate - INFO - Update of uicustomizer to 0.1.9.4 successful! 2023-03-28 15:24:26,970 - octoprint.plugins.softwareupdate - INFO - Saved update log to disk 2023-03-28 15:24:27,157 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk 2023-03-28 15:24:27,168 - octoprint.plugins.softwareupdate - INFO - Restarting... 2023-03-28 15:24:27,280 - octoprint.plugins.tracking - INFO - Sent tracking event update_successful, payload: {'target': 'uicustomizer', 'from_version': '0.1.9.2', 'to_version': '0.1.9.4'} 2023-03-28 15:24:31,151 - octoprint.startup - INFO - ****************************************************************************** 2023-03-28 15:24:31,156 - octoprint.startup - INFO - Starting OctoPrint 1.8.7 2023-03-28 15:24:31,157 - octoprint.startup - INFO - ****************************************************************************** 2023-03-28 15:24:31,659 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: online 2023-03-28 15:24:31,659 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 1.1.1.1:53 is working 2023-03-28 15:24:31,659 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is working 2023-03-28 15:24:32,363 - octoprint.startup - INFO - Blacklist processing done, adding 3 blacklisted plugin versions: roomtemp (any), GcodeEditor (>=0.1.1,<=0.2.8), gcodeleveling (>=0.1.0,<=0.1.1) 2023-03-28 15:24:32,381 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2023-03-28 15:24:37,989 - octoprint.plugin.core - INFO - Plugin Detailed Progress (0.2.7) is disabled. 2023-03-28 15:24:38,501 - octoprint.plugins.errortracking - INFO - Initialized error tracking 2023-03-28 15:24:38,712 - octoprint.plugin.core - INFO - Found 36 plugin(s) providing 35 mixin implementations, 75 hook handlers 2023-03-28 15:24:39,159 - octoprint.server.heartbeat - INFO - Starting server heartbeat, 900.0s interval 2023-03-28 15:24:39,311 - octoprint.server - INFO - Intermediary server started 2023-03-28 15:24:39,354 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/pi/.octoprint/uploads... 2023-03-28 15:24:39,411 - octoprint.filemanager.storage - INFO - ... file metadata for /home/pi/.octoprint/uploads initialized successfully. 2023-03-28 15:24:39,420 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_SHOW (needs: "Need(method='role', value='plugin_action_command_notification_show')") 2023-03-28 15:24:39,421 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_CLEAR (needs: "Need(method='role', value='plugin_action_command_notification_clear')") 2023-03-28 15:24:39,421 - octoprint.server - INFO - Added new permission from plugin action_command_prompt: PLUGIN_ACTION_COMMAND_PROMPT_INTERACT (needs: "Need(method='role', value='plugin_action_command_prompt_interact')") 2023-03-28 15:24:39,422 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_READ (needs: "Need(method='role', value='plugin_announcements_read')") 2023-03-28 15:24:39,423 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_MANAGE (needs: "Need(method='role', value='plugin_announcements_manage'), Need(method='role', value='plugin_announcements_read')") 2023-03-28 15:24:39,424 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_ADMIN (needs: "Need(method='role', value='plugin_appkeys_admin')") 2023-03-28 15:24:39,425 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_GRANT (needs: "Need(method='role', value='plugin_appkeys_user')") 2023-03-28 15:24:39,427 - octoprint.server - INFO - Added new permission from plugin backup: PLUGIN_BACKUP_ACCESS (needs: "Need(method='role', value='plugin_backup_access')") 2023-03-28 15:24:39,430 - octoprint.server - INFO - Added new permission from plugin firmware_check: PLUGIN_FIRMWARE_CHECK_DISPLAY (needs: "Need(method='role', value='plugin_firmware_check_display')") 2023-03-28 15:24:39,434 - octoprint.server - INFO - Added new permission from plugin logging: PLUGIN_LOGGING_MANAGE (needs: "Need(method='role', value='plugin_logging_manage')") 2023-03-28 15:24:39,437 - octoprint.server - INFO - Added new permission from plugin pi_support: PLUGIN_PI_SUPPORT_STATUS (needs: "Need(method='role', value='plugin_pi_support_check')") 2023-03-28 15:24:39,442 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_LIST (needs: "Need(method='role', value='plugin_pluginmanager_list')") 2023-03-28 15:24:39,444 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_MANAGE (needs: "Need(method='role', value='plugin_pluginmanager_manage')") 2023-03-28 15:24:39,447 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_INSTALL (needs: "Need(method='role', value='plugin_pluginmanager_manage'), Need(method='role', value='plugin_pluginmanager_install')") 2023-03-28 15:24:39,452 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CHECK (needs: "Need(method='role', value='plugin_softwareupdate_check')") 2023-03-28 15:24:39,456 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_UPDATE (needs: "Need(method='role', value='plugin_softwareupdate_update')") 2023-03-28 15:24:39,458 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CONFIGURE (needs: "Need(method='role', value='plugin_softwareupdate_configure')") 2023-03-28 15:24:41,384 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2023-03-28 15:24:43,208 - octoprint.util.pip - INFO - Version of pip is 22.3 2023-03-28 15:24:43,220 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2023-03-28 15:24:43,220 - octoprint.util.pip - INFO - ==> pip ok -> yes 2023-03-28 15:24:43,605 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk 2023-03-28 15:24:43,642 - octoprint.plugins.softwareupdate - INFO - Loaded update log from disk 2023-03-28 15:24:43,869 - octoprint.plugins.firmwareupdater - INFO - Python binproto2 package installed: False 2023-03-28 15:24:44,191 - octoprint.plugin.core - INFO - Initialized 35 plugin implementation(s) 2023-03-28 15:24:44,431 - octoprint.plugins.uicustomizer - INFO - Downloaded theme: https://lazemss.github.io/OctoPrint-UICustomizerThemes/css/cyborg.css into: /home/pi/oprint/lib/python3.9/site-packages/octoprint_uicustomizer/static/themes/css/cyborg.css 2023-03-28 15:24:44,786 - octoprint.plugin.core - INFO - 36 plugin(s) registered with the system: | ABL Expert Plugin (0.6) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_ABL_Expert | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/appkeys | Backup & Restore (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/backup | Bed Visualizer (1.1.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_bedlevelvisualizer | Calibration Tools (1.0.4) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_CalibrationTools | Core Wizard (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/corewizard | !Detailed Progress (0.2.7) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_detailedprogress | Discovery (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/discovery | DisplayLayerProgress Plugin (1.28.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_DisplayLayerProgress | DisplayZ (0.2.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_displayz | Error Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/errortracking | Event Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/eventmanager | Filament Manager (1.9.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_filamentmanager | File Check (2021.2.23) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_file_check | Firmware Check (2021.10.11) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmware_check | Firmware Updater (1.14.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmwareupdater | GCode Viewer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/gcodeviewer | HeaterTimeout (0.0.4) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_HeaterTimeout | Logging (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/logging | Navbar Temperature Plugin (0.15) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_navbartemp | Octoprint Display ETA (2.2.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_display_eta | Pi Support Plugin (2022.6.13) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/pluginmanager | Preheat Button (0.8.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_preheat | Print History Plugin (1.3) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_printhistory | Printer Stats (3.1.3) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_stats | Simple Emergency Stop (1.0.5) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_simpleemergencystop | Software Update (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/softwareupdate | Touchtest Plugin (0.4.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_touchtest | UI Customizer (0.1.9.4) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_uicustomizer | Virtual Printer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/virtual_printer | Z Probe Offset (0.5) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_z_probe_offset Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2023-03-28 15:24:44,840 - octoprint.environment - INFO - Detected environment is Python 3.9.2 under Linux (linux). Details: | hardware: | cores: 4 | freq: 1200.0 | ram: 912883712 | os: | bits: 32 | id: linux | platform: linux | plugins: | pi_support: | model: Raspberry Pi 3 Model B Rev 1.2 | octopi_version: 1.0.0 | throttle_check_enabled: true | throttle_check_functional: true | throttle_state: '0x0' | python: | pip: '22.3' | version: 3.9.2 | virtualenv: /home/pi/oprint 2023-03-28 15:24:44,875 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/webassets... 2023-03-28 15:24:44,877 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-cache... 2023-03-28 15:24:44,879 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-manifest.json... 2023-03-28 15:24:44,905 - octoprint.server.util.flask.collect_plugin_assets - WARNING - Plugin simpleemergencystop is referring to non existing css asset css/fontawesome.all.min.css 2023-03-28 15:24:45,093 - octoprint.plugins.DisplayLayerProgress - WARNING - The Blueprint of this plugin is relying on the default implementation of is_blueprint_csrf_protected (newly added in OctoPrint 1.8.3), which in a future version will be switched from False to True for security reasons. Plugin authors should ensure they explicitly declare the CSRF protection status in their BlueprintPlugin mixin implementation. Recommendation is to enable CSRF protection and exempt views that must not use it with the octoprint.plugin.BlueprintPlugin.csrf_exempt decorator. 2023-03-28 15:24:45,094 - octoprint.server - WARNING - CSRF Protection for Blueprint of plugin DisplayLayerProgress is DISABLED 2023-03-28 15:24:45,100 - octoprint.plugins.bedlevelvisualizer - WARNING - The Blueprint of this plugin is relying on the default implementation of is_blueprint_csrf_protected (newly added in OctoPrint 1.8.3), which in a future version will be switched from False to True for security reasons. Plugin authors should ensure they explicitly declare the CSRF protection status in their BlueprintPlugin mixin implementation. Recommendation is to enable CSRF protection and exempt views that must not use it with the octoprint.plugin.BlueprintPlugin.csrf_exempt decorator. 2023-03-28 15:24:45,101 - octoprint.server - WARNING - CSRF Protection for Blueprint of plugin bedlevelvisualizer is DISABLED 2023-03-28 15:24:45,107 - octoprint.plugins.filamentmanager - WARNING - The Blueprint of this plugin is relying on the default implementation of is_blueprint_csrf_protected (newly added in OctoPrint 1.8.3), which in a future version will be switched from False to True for security reasons. Plugin authors should ensure they explicitly declare the CSRF protection status in their BlueprintPlugin mixin implementation. Recommendation is to enable CSRF protection and exempt views that must not use it with the octoprint.plugin.BlueprintPlugin.csrf_exempt decorator. 2023-03-28 15:24:45,107 - octoprint.server - WARNING - CSRF Protection for Blueprint of plugin filamentmanager is DISABLED 2023-03-28 15:24:45,115 - octoprint.plugins.printhistory - WARNING - The Blueprint of this plugin is relying on the default implementation of is_blueprint_csrf_protected (newly added in OctoPrint 1.8.3), which in a future version will be switched from False to True for security reasons. Plugin authors should ensure they explicitly declare the CSRF protection status in their BlueprintPlugin mixin implementation. Recommendation is to enable CSRF protection and exempt views that must not use it with the octoprint.plugin.BlueprintPlugin.csrf_exempt decorator. 2023-03-28 15:24:45,115 - octoprint.server - WARNING - CSRF Protection for Blueprint of plugin printhistory is DISABLED 2023-03-28 15:24:46,062 - octoprint.plugins.firmwareupdater - INFO - Setting maximum upload size for /flash to 5243904 2023-03-28 15:24:46,063 - octoprint.server - INFO - Shutting down intermediary server... 2023-03-28 15:24:46,474 - octoprint.server - INFO - Intermediary server shut down 2023-03-28 15:24:46,482 - octoprint.events - INFO - Processing startup event, this is our first event 2023-03-28 15:24:46,483 - octoprint.events - INFO - Adding 1 events to queue that were held back before startup event 2023-03-28 15:24:46,484 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue... 2023-03-28 15:24:46,494 - octoprint.server - INFO - Autoconnect on startup is configured, trying to connect to the printer... 2023-03-28 15:24:46,505 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue 2023-03-28 15:24:46,575 - octoprint.server - INFO - Trying to connect to configured serial port None 2023-03-28 15:24:46,949 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2023-03-28 15:24:46,976 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder... 2023-03-28 15:24:47,002 - octoprint.server.util.watchdog - INFO - ... initial scan done. 2023-03-28 15:24:47,030 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 7 port/baudrate candidates: /dev/ttyUSB0@115200, /dev/ttyUSB0@250000, /dev/ttyUSB0@230400, /dev/ttyUSB0@57600, /dev/ttyUSB0@38400, /dev/ttyUSB0@19200, /dev/ttyUSB0@9600 2023-03-28 15:24:47,032 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200 2023-03-28 15:24:47,061 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200 2023-03-28 15:24:47,089 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2023-03-28 15:24:47,098 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2023-03-28 15:24:47,111 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Operational" 2023-03-28 15:24:47,133 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2023-03-28 15:24:47,163 - octoprint.plugins.firmwareupdater - INFO - Got CONNECTED event 2023-03-28 15:24:47,175 - octoprint.plugins.firmwareupdater - INFO - Run postflash flag is not set 2023-03-28 15:24:47,178 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2023-03-28 15:24:47,285 - octoprint.util.comm - INFO - Printer reports firmware name "1.0.13" 2023-03-28 15:24:47,308 - octoprint.plugins.firmwareupdater - INFO - Setting BINARY_FILE_TRANSFER capability to False 2023-03-28 15:24:47,320 - octoprint.plugins.ABL_Expert - INFO - self.printer_cap[eeprom] is now 1 2023-03-28 15:24:47,326 - octoprint.plugins.z_probe_offset - INFO - Printer_cap[eeprom]:1 2023-03-28 15:24:47,336 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting 2023-03-28 15:24:47,350 - octoprint.plugins.ABL_Expert - INFO - self.printer_cap[autolevel] is now 1 2023-03-28 15:24:47,360 - octoprint.plugins.ABL_Expert - INFO - self.printer_cap[z_probe] is now 1 2023-03-28 15:24:47,360 - octoprint.plugins.z_probe_offset - INFO - Printer_cap[z_probe]:1 2023-03-28 15:24:47,364 - octoprint.plugins.ABL_Expert - INFO - self.printer_cap[leveling_data] is now 1 2023-03-28 15:24:47,388 - octoprint.util.comm - INFO - Firmware states that it supports emergency GCODEs to be sent without waiting for an acknowledgement first 2023-03-28 15:24:47,461 - octoprint.plugins.tracking - INFO - Sent tracking event system_unthrottled, payload: {'throttled_now': False, 'throttled_past': False, 'throttled_mask': 0, 'throttled_voltage_now': False, 'throttled_voltage_past': False, 'throttled_overheat_now': False, 'throttled_overheat_past': False} 2023-03-28 15:24:47,889 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance "CR10 Smart Pro 2"._http._tcp.local.' for _http._tcp.local. 2023-03-28 15:24:48,001 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {'firmware_name': '1.0.13', 'printer_port': None, 'printer_baudrate': 0} 2023-03-28 15:24:48,689 - octoprint.plugins.z_probe_offset - INFO - Z probe offset is now -3.82 2023-03-28 15:24:48,726 - octoprint.plugins.ABL_Expert - INFO - Grid mesh size is 5 2023-03-28 15:24:48,759 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance "CR10 Smart Pro 2"._octoprint._tcp.local.' for _octoprint._tcp.local. 2023-03-28 15:24:48,805 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance "CR10 Smart Pro 2" for SSDP 2023-03-28 15:24:48,846 - octoprint.plugins.ABL_Expert - INFO - Grid mesh size is 13 2023-03-28 15:24:48,945 - octoprint.util.comm - INFO - Externally triggered heatup detected 2023-03-28 15:24:48,960 - octoprint.server - INFO - Listening on http://127.0.0.1:5000 2023-03-28 15:24:48,973 - octoprint.plugins.z_probe_offset - INFO - Z probe offset is now -3.82 2023-03-28 15:24:49,125 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2023-03-28 15:24:50,397 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.49 2023-03-28 15:24:50,915 - octoprint.server.util.flask - INFO - Passively logging in user jdthomas24 from ::ffff:192.168.1.49 2023-03-28 15:24:50,917 - octoprint.access.users - INFO - Logged in user: jdthomas24 2023-03-28 15:24:50,936 - octoprint.plugins.uicustomizer - INFO - Checking for updated themes 2023-03-28 15:24:51,076 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.33 2023-03-28 15:24:51,163 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2023-03-28 15:24:51,172 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2023-03-28 15:24:51,172 - octoprint.util.pip - INFO - ==> pip ok -> yes 2023-03-28 15:24:51,234 - octoprint.server.util.sockjs - INFO - User jdthomas24 logged in on the socket from client ::ffff:192.168.1.49 2023-03-28 15:24:51,269 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 23.9GB. That is considered sufficient for updating. 2023-03-28 15:24:51,278 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json 2023-03-28 15:24:52,561 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2023-03-28 15:24:55,313 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2023-03-28 15:24:55,315 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2023-03-28 15:24:55,316 - octoprint.util.pip - INFO - ==> pip ok -> yes 2023-03-28 15:24:55,751 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk 2023-03-28 15:24:55,855 - octoprint.plugins.HeaterTimeout - INFO - Starting up... 2023-03-28 15:24:55,864 - octoprint.plugins.bedlevelvisualizer - INFO - OctoPrint-BedLevelVisualizer loaded! 2023-03-28 15:24:56,156 - octoprint.plugins.stats - INFO - Printer Stats 2023-03-28 15:24:56,228 - octoprint.plugins.uicustomizer - INFO - UI Customizer is initialized. 2023-03-28 15:24:56,399 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 20, 'printer_state': 'OPERATIONAL'} 2023-03-28 15:24:57,175 - octoprint.plugins.tracking - INFO - Sent tracking event pong, payload: {'version': '1.8.7', 'os': 'linux', 'bits': 32, 'python': '3.9.2', 'pip': '22.3', 'cores': 4, 'freq': 1200.0, 'ram': 912883712, 'pi_model': 'Raspberry Pi 3 Model B Rev 1.2', 'octopi_version': '1.0.0', 'plugins': 'z_probe_offset:0.5,uicustomizer:0.1.9.4,preheat:0.8.0,touchtest:0.4.1,stats:3.1.3,simpleemergencystop:1.0.5,printhistory:1.3,navbartemp:0.15,heatertimeout:0.0.4,firmwareupdater:1.14.0,filamentmanager:1.9.1,displayz:0.2.0,display_eta:2.2.0,calibrationtools:1.0.4,displaylayerprogress:1.28.0,bedlevelvisualizer:1.1.1,abl_expert:0.6'} 2023-03-28 15:24:57,302 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'http://192.168.1.249/', 'path': '/', 'query_string': 'l10n=en'} 2023-03-28 15:24:57,876 - octoprint.plugins.tracking - INFO - Sent tracking event startup, payload: {'version': '1.8.7', 'os': 'linux', 'bits': 32, 'python': '3.9.2', 'pip': '22.3', 'cores': 4, 'freq': 1200.0, 'ram': 912883712, 'pi_model': 'Raspberry Pi 3 Model B Rev 1.2', 'octopi_version': '1.0.0'} 2023-03-28 15:25:02,209 - octoprint.server.util.flask - INFO - Passively logging in user jdthomas24 from ::ffff:192.168.1.33 2023-03-28 15:25:02,216 - octoprint.access.users - INFO - Logged in user: jdthomas24 2023-03-28 15:25:10,929 - octoprint.server.util.sockjs - INFO - User jdthomas24 logged in on the socket from client ::ffff:192.168.1.33 2023-03-28 15:25:21,960 - octoprint.server.preemptive_cache - INFO - ... done in 24.66s 2023-03-28 15:28:27,480 - octoprint.server.util.flask - INFO - Passively logging in user jdthomas24 from ::ffff:192.168.1.49 2023-03-28 15:28:27,482 - octoprint.access.users - INFO - Logged in user: jdthomas24 2023-03-28 15:28:27,620 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.49 2023-03-28 15:28:28,197 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.49 2023-03-28 15:28:28,376 - octoprint.server.util.flask - INFO - Passively logging in user jdthomas24 from ::ffff:192.168.1.49 2023-03-28 15:28:28,377 - octoprint.access.users - INFO - Logged in user: jdthomas24 2023-03-28 15:28:34,067 - octoprint.server.util.sockjs - INFO - User jdthomas24 logged in on the socket from client ::ffff:192.168.1.49 2023-03-28 15:28:40,762 - octoprint.plugins.tracking - INFO - Sent tracking event webui_load, payload: {'browser_name': 'Chrome', 'browser_version': '111.0.0.0', 'os_name': 'Mac OS', 'os_version': '10.15.7'} 2023-03-28 15:29:25,208 - octoprint.printer.standard.job - INFO - Print job selected - origin: local, path: Samsung GTAB A7-8.7%22 2022.gcode, owner: jdthomas24, user: jdthomas24 2023-03-28 15:29:25,273 - octoprint.plugins.DisplayLayerProgress - INFO - File '/home/pi/.octoprint/uploads/Samsung GTAB A7-8.7%22 2022.gcode' selected. Determining number of layers. 2023-03-28 15:29:25,286 - octoprint.plugins.DisplayLayerProgress - INFO - Read total height from MetaFile 2023-03-28 15:29:25,543 - octoprint.util.comm - INFO - Starting job on behalf of user jdthomas24 2023-03-28 15:29:25,568 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting" 2023-03-28 15:29:25,644 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: Samsung GTAB A7-8.7%22 2022.gcode, owner: jdthomas24, user: jdthomas24 2023-03-28 15:29:26,050 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2023-03-28 15:29:26,062 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Printing" 2023-03-28 15:29:26,916 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile 2023-03-28 15:29:26,966 - octoprint.plugins.DisplayLayerProgress - INFO - File select-event processing done!' 2023-03-28 15:29:27,198 - octoprint.plugins.DisplayLayerProgress - INFO - Printing started. Detailed progress started.{'name': 'Samsung GTAB A7-8.7%22 2022.gcode', 'path': 'Samsung GTAB A7-8.7%22 2022.gcode', 'origin': 'local', 'size': 3865864, 'owner': 'jdthomas24', 'user': 'jdthomas24'} 2023-03-28 15:29:27,258 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2023-03-28 15:29:27,776 - octoprint.plugins.tracking - INFO - Sent tracking event print_started, payload: {'origin': 'local', 'file': '04b0a4b44c0bd2e17d1da00841adec9f2589788f'} 2023-03-28 15:29:28,242 - octoprint.util.comm - INFO - Printer seems to support the busy protocol, will adjust timeouts and set busy interval accordingly 2023-03-28 15:33:07,608 - octoprint.util.comm - INFO - Telling the printer to set the busy interval to our "communicationBusy" timeout - 1s = 2s 2023-03-28 15:39:39,161 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-28 15:39:56,369 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 920, 'printer_state': 'PRINTING'} 2023-03-28 15:54:39,164 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-28 15:54:56,410 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 1820, 'printer_state': 'PRINTING'} 2023-03-28 16:09:39,166 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-28 16:09:56,540 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 2720, 'printer_state': 'PRINTING'} 2023-03-28 16:24:39,168 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-28 16:24:56,558 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 3620, 'printer_state': 'PRINTING'} 2023-03-28 16:38:30,753 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.33 2023-03-28 16:39:39,170 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-28 16:39:56,435 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 4520, 'printer_state': 'PRINTING'} 2023-03-28 16:54:39,172 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-28 16:54:56,439 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 5420, 'printer_state': 'PRINTING'} 2023-03-28 17:09:39,175 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-28 17:09:56,449 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 6320, 'printer_state': 'PRINTING'} 2023-03-28 17:24:39,177 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-28 17:24:56,475 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 7220, 'printer_state': 'PRINTING'} 2023-03-28 17:39:39,179 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-28 17:39:56,433 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 8120, 'printer_state': 'PRINTING'} 2023-03-28 17:54:39,181 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-28 17:54:56,474 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 9020, 'printer_state': 'PRINTING'} 2023-03-28 18:09:39,183 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-28 18:10:01,519 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 9920, 'printer_state': 'PRINTING'} 2023-03-28 18:24:39,185 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-28 18:24:56,507 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 10820, 'printer_state': 'PRINTING'} 2023-03-28 18:39:39,187 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-28 18:39:56,563 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 11720, 'printer_state': 'PRINTING'} 2023-03-28 18:54:39,189 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-28 18:54:56,530 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 12620, 'printer_state': 'PRINTING'} 2023-03-28 19:09:39,191 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-28 19:09:56,564 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 13520, 'printer_state': 'PRINTING'} 2023-03-28 19:10:39,237 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.49 2023-03-28 19:24:39,194 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-28 19:25:01,558 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 14420, 'printer_state': 'PRINTING'} 2023-03-28 19:39:39,196 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-28 19:39:56,590 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 15320, 'printer_state': 'PRINTING'} 2023-03-28 19:54:39,198 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-28 19:54:57,063 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 16220, 'printer_state': 'PRINTING'} 2023-03-28 20:09:39,200 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-28 20:09:56,596 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 17120, 'printer_state': 'PRINTING'} 2023-03-28 20:24:39,202 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-28 20:24:56,624 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 18020, 'printer_state': 'PRINTING'} 2023-03-28 20:39:39,204 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-28 20:39:56,633 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 18920, 'printer_state': 'PRINTING'} 2023-03-28 20:54:39,206 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-28 20:54:56,607 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 19820, 'printer_state': 'PRINTING'} 2023-03-28 21:09:39,209 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-28 21:09:56,674 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 20720, 'printer_state': 'PRINTING'} 2023-03-28 21:24:39,211 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-28 21:24:56,596 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 21620, 'printer_state': 'PRINTING'} 2023-03-28 21:39:39,213 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-28 21:39:56,649 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 22520, 'printer_state': 'PRINTING'} 2023-03-28 21:54:39,215 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-28 21:54:56,594 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 23420, 'printer_state': 'PRINTING'} 2023-03-28 22:09:39,217 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-28 22:09:56,691 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 24320, 'printer_state': 'PRINTING'} 2023-03-28 22:24:39,219 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-28 22:24:56,653 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 25220, 'printer_state': 'PRINTING'} 2023-03-28 22:39:39,221 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-28 22:39:56,690 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 26120, 'printer_state': 'PRINTING'} 2023-03-28 22:46:02,707 - octoprint.util.comm - INFO - Finished in 26197.164 s. 2023-03-28 22:46:02,709 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Finishing" 2023-03-28 22:46:02,741 - octoprint.printer.standard.job - INFO - Print job done - origin: local, path: Samsung GTAB A7-8.7%22 2022.gcode, owner: jdthomas24 2023-03-28 22:46:02,873 - octoprint.plugins.DisplayLayerProgress - INFO - Printing stopped. Detailed progress stopped. 2023-03-28 22:46:02,888 - octoprint.plugins.filamentmanager - INFO - Updating Filament usage for octoprint configured toolcount: 1 2023-03-28 22:46:02,889 - octoprint.plugins.filamentmanager - INFO - Filament tracked toolcount: 1 2023-03-28 22:46:02,909 - octoprint.plugins.filamentmanager - INFO - Filament tracked values: [25873.764199982576] 2023-03-28 22:46:02,926 - octoprint.plugins.filamentmanager - INFO - Filament used: 25873.764199982576 mm (tool0) 2023-03-28 22:46:02,975 - octoprint.plugins.filamentmanager - WARNING - No selected spool for tool0 2023-03-28 22:46:02,994 - octoprint.plugins.printhistory - INFO - Name: Samsung GTAB A7-8.7%22 2022.gcode 2023-03-28 22:46:02,995 - octoprint.plugins.printhistory - INFO - Origin: local 2023-03-28 22:46:02,995 - octoprint.plugins.printhistory - INFO - Path: Samsung GTAB A7-8.7%22 2022.gcode 2023-03-28 22:46:03,009 - octoprint.plugins.printhistory - INFO - Path_On_disk: /home/pi/.octoprint/uploads/Samsung GTAB A7-8.7%22 2022.gcode 2023-03-28 22:46:03,029 - octoprint.plugins.printhistory - INFO - Got metadata from name 2023-03-28 22:46:03,030 - octoprint.plugins.printhistory - INFO - found fileData 2023-03-28 22:46:03,047 - octoprint.util.comm - INFO - Changing monitoring state from "Finishing" to "Operational" 2023-03-28 22:46:03,054 - octoprint.plugins.printhistory - INFO - {"processName": "Process 1", "targetModels": "\"Galaxy Tab A7- 8.7\"\" 2022\"", "profileName": "Creality CR-10", "profileVersion": "2023-03-23 21:49:38", "app": "S3D-Software 5.0.2", "technology": "fff", "baseProfile": "", "extruder": "Primary Extruder", "toolheadNumber": "0", "nozzleDiameter": "0.38000", "extrusionMultiplier": "0.90000", "extrusionWidthMode": "manual", "extrusionWidth": "0.40000", "useRetraction": "1", "retractDistance": "4.00000", "extraRestartDistance": "0.00000", "retractVerticalLift": "0.00000", "retractSpeed": "1800.00000", "useCoasting": "0", "coastingDistance": "0.20000", "useWiping": "0", "wipingDistance": "5.00000", "speedMaxFlowRate": "1000.00000", "toolheadOffsetX": "0.00000", "toolheadOffsetY": "0.00000", "filamentDiameter": "1.75000", "filamentPricePerKilogram": "20.00000", "filamentDensity": "1.25000", "primaryExtruder": "Primary Extruder", "layerHeight": "0.20000", "topSolidLayers": "4", "bottomSolidLayers": "4", "outlinePerimeters": "2", "useVaseMode": "0", "useAdaptiveLayerHeights": "0", "minAdaptiveLayerHeight": "0.10000", "maxAdaptiveLayerHeight": "0.30000", "adaptiveSmoothingLevel": "5", "horizontalOuterCompensation": "0.00000", "horizontalInnerCompensation": "0.00000", "firstLayerUnits": "percentage", "firstLayerHeightPercentage": "100", "firstLayerWidthPercentage": "100", "firstLayerSpeedPercentage": "50", "firstLayerHeightAbsolute": "0.30000", "firstLayerWidthAbsolute": "0.40000", "firstLayerSpeedAbsolute": "900.00000", "startPointStrategy": "closest", "alignStartPointsX": "0.00000", "alignStartPointsY": "0.00000", "restrictStartPoints": "1", "perimeterPrintingOrder": "inside_out", "islandPrintingOrder": "closest", "printInfillBeforePerimeters": "0", "useSkirt": "0", "skirtExtruder": "Primary Extruder", "skirtLayers": "1", "skirtOffset": "3.00000", "skirtOutlines": "2", "useRaft": "0", "raftExtruder": "Primary Extruder", "raftBaseLayers": "2", "raftTopLayers": "3", "raftOffset": "3.00000", "raftSeparationDistance": "0.14000", "raftSpeedUnits": "percentage", "raftSpeedPercentage": "30", "raftSpeedAbsolute": "600.00000", "usePrimePillar": "0", "primePillarExtruder": "All Extruders", "primePillarWidth": "12.00000", "primePillarLocation": "north_west", "primePillarSpeedPercentage": "100", "primePillarInfillPercentage": "100", "autoStopPrimePillar": "1", "primePillarLayersAfterAutoStop": "0", "useOozeShield": "0", "oozeShieldExtruder": "All Extruders", "oozeShieldOffset": "2.00000", "oozeShieldOutlines": "1", "oozeShieldSidewallShape": "waterfall", "oozeShieldSidewallAngle": "30", "oozeShieldSpeedPercentage": "100", "autoStopOozeShield": "1", "oozeShieldLayersAfterAutoStop": "0", "sparseInfillExtruder": "Primary Extruder", "sparseInfillPattern": "rectilinear", "sparseInfillRotation": "0", "sparseInfillPercentage": "22", "sparseInfillExtrusionWidthPercentage": "100", "sparseInfillCombinedLayers": "1", "denseInfillLayers": "0", "denseInfillPercentage": "50", "infillOutlineOverlapPercentage": "15", "minInfillLength": "5.00000", "externalInfillPattern": "rectilinear", "externalInfillRotation": "0", "solidInfillThresholdArea": "25.00000", "solidInfillExtraExpansion": "0.00000", "useDiaphragm": "0", "diaphragmSolidLayers": "3", "diaphragmSpacingLayers": "20", "sparseSupportExtruder": "Primary Extruder", "sparseSupportInfillPattern": "aligned", "sparseSupportInfillRotation": "0", "sparseSupportInfillPercentage": "23", "sparseSupportOutlines": "0", "sparseSupportCombinedLayers": "1", "upperDenseSupportLayers": "0", "lowerDenseSupportLayers": "0", "denseSupportExtruder": "Primary Extruder", "denseSupportInfillPercentage": "70", "denseSupportExtraExpansion": "0.00000", "baseSupportLayers": "0", "supportInflationDistance": "0.00000", "supportHorizontalPartOffset": "0.30000", "supportUpperSeparationLayers": "1", "supportLowerSeparationLayers": "1", "temperatureController": "Heated Bed", "enableTemperatureController": "1", "temperatureNumber": "0", "temperatureType": "platform", "stabilizeAtStartup": "1", "temperatureSetpoints": "1|60", "useIdleCooldown": "0", "cooldownTemperature": "150", "cooldownRequiredIdleTime": "180", "cooldownReheatTime": "60", "fan": "Cooling Fan", "fanNumber": "0", "fanType": "extruder", "blipFanToFullPower": "0", "fanSetpoints": "1|0,4|60", "increaseFanForQuickLayers": "0", "fanMaxQuickLayerTime": "45.00000", "fanMinQuickLayerTime": "15.00000", "maxQuickLayerFanSpeedPercentage": "100", "defaultPrintSpeed": "3400.00000", "outerPerimeterSpeedPercentage": "50", "innerPerimeterSpeedPercentage": "80", "solidInfillSpeedPercentage": "80", "sparseSupportSpeedPercentage": "80", "denseSupportSpeedPercentage": "70", "travelSpeedXY": "4800.00000", "travelSpeedZ": "1000.00000", "reduceSpeedForQuickLayers": "1", "speedMaxQuickLayerTime": "15.00000", "minQuickLayerSpeedPercentage": "20", "reduceSpeedForShortPerimeters": "1", "speedMaxShortPerimeterLength": "80.00000", "minShortPerimeterSpeedPercentage": "50", "reduceSpeedForMaxFlowRate": "0", "accelXY": "1000.00000", "accelZ": "150.00000", "accelE": "3000.00000", "jerkXY": "600.00000", "jerkZ": "24.00000", "jerkE": "300.00000", "exportFileFormat": "gcode", "useStickyCommands": "1", "use5D": "1", "relativeExtrusionDistances": "0", "allowExtruderAxisZeroing": "1", "independentExtruderAxes": "0", "includeM10123": "0", "x3gMachineProfile": "r2", "overrideStepsPerMillimeter": "0", "stepsPerMillimeterX": "88.57319", "stepsPerMillimeterY": "88.57319", "stepsPerMillimeterZ": "400.00000", "stepsPerMillimeterA": "96.27520", "stepsPerMillimeterB": "96.27520", "xyzFileFormatVersion": "1", "makerBotMachineProfile": "replicator_5", "makerBotModelExtruder": "mk13", "makerBotSupportExtruder": "mk14_s", "makerBotModelMaterial": "pla", "makerBotSupportMaterial": "pva", "globalOffsetX": "0.00000", "globalOffsetY": "0.00000", "globalOffsetZ": "0.00000", "applyToolheadOffsets": "0", "buildVolumeShape": "rectangular", "buildVolumeX": "300.00000", "buildVolumeY": "300.00000", "buildVolumeZ": "400.00000", "buildVolumeDiameter": "200.00000", "originOffsetX": "0.00000", "originOffsetY": "0.00000", "originOffsetZ": "0.00000", "homingDirectionX": "min", "homingDirectionY": "min", "homingDirectionZ": "min", "mirrorVisualX": "0", "mirrorVisualY": "1", "mirrorVisualZ": "0", "machineBackgroundModel": "", "startingScript": "G28", "preLayerChangeScript": "", "postLayerChangeScript": "", "preRetractionScript": "", "postRetractionScript": "", "preToolChangeScript": "", "postToolChangeScript": "", "processChangeScript": "", "endingScript": "G28 X0", "postProcessingScript": "", "useBridging": "1", "bridgingThresholdArea": "50.00000", "bridgingInfillExtraExpansion": "0.00000", "bridgingExtrusionModifier": "100", "bridgingSpeedModifier": "100", "overrideFanSpeedForBridging": "0", "bridgingFanSpeedPercentage": "100", "useFixedBridgingAngle": "0", "fixedBridgingAngle": "0", "applyBridgingToPerimeters": "0", "bridgingPerimeterExtraOverlap": "0.00000", "minBridgingPerimeterLength": "10.00000", "useToolChangeRetraction": "1", "toolChangeRetractDistance": "12.00000", "toolChangeExtraRestartDistance": "-0.50000", "toolChangeRetractSpeed": "600.00000", "toolChangePrimeOnFirstUse": "0", "toolChangeRetractAtEnd": "0", "externalThinWallType": "perimeters_only", "internalThinWallType": "gap_fill", "thinWallAllowedOverlapPercentage": "10", "singleExtrusionMinLength": "1.00000", "singleExtrusionMinWidthPercentage": "50", "singleExtrusionMaxWidthPercentage": "200", "singleExtrusionEndpointExtensionDistance": "0.20000", "onlyRetractWhenCrossingOutlines": "1", "retractBetweenLayers": "1", "useRetractionMinTravel": "0", "retractionMinTravel": "3.00000", "useRetractionMinExtrusion": "0", "retractionMinExtrusion": "3.00000", "retractWhileWiping": "0", "wipingMode": "outer_perimeter", "avoidCrossingOutlines": "0", "maxMovementDetourFactor": "3.00000", "openLoopSlicingBehavior": "heal", "openLoopThickenWidth": "0.50000", "slicingRegionRepairMode": "positive", "Material Cost": "1.56", "Material Weight": "77.76 g (0.17 lb)", "Material Volume": "62209.6 mm^3 (62.21 cc)", "Material Length": "25863.8 mm (25.86 m)", "Build Time": "6 hours 41 minutes", "slicer_name": "simplify3d", "slicer_version": "5.0.2"} 2023-03-28 22:46:03,111 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2023-03-28 22:46:03,215 - octoprint.plugins.printhistory - INFO - fileData not found 2023-03-28 22:46:03,496 - octoprint.plugins.tracking - INFO - Sent tracking event print_done, payload: {'origin': 'local', 'file': '04b0a4b44c0bd2e17d1da00841adec9f2589788f', 'elapsed': 26197} 2023-03-28 22:54:39,223 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-28 22:54:56,718 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 27020, 'printer_state': 'OPERATIONAL'} 2023-03-28 23:09:39,225 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-28 23:09:56,733 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 27920, 'printer_state': 'OPERATIONAL'} 2023-03-28 23:22:45,918 - octoprint.startup - INFO - ****************************************************************************** 2023-03-28 23:22:45,923 - octoprint.startup - INFO - Starting OctoPrint 1.8.7 2023-03-28 23:22:45,944 - octoprint.startup - INFO - ****************************************************************************** 2023-03-28 23:22:46,968 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: online 2023-03-28 23:22:46,969 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 1.1.1.1:53 is working 2023-03-28 23:22:46,969 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is working 2023-03-28 23:22:47,018 - octoprint.startup - INFO - Unable to fetch plugin blacklist from https://plugins.octoprint.org/blacklist.json, proceeding without it: HTTPSConnectionPool(host='plugins.octoprint.org', port=443): Max retries exceeded with url: /blacklist.json (Caused by NewConnectionError(': Failed to establish a new connection: [Errno -3] Temporary failure in name resolution')) 2023-03-28 23:22:47,019 - octoprint.startup - INFO - Blacklist processing done 2023-03-28 23:22:47,036 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2023-03-29 00:36:09,664 - octoprint.plugin.core - INFO - Plugin Detailed Progress (0.2.7) is disabled. 2023-03-29 00:36:10,287 - octoprint.plugins.errortracking - INFO - Initialized error tracking 2023-03-29 00:36:10,497 - octoprint.plugin.core - INFO - Found 36 plugin(s) providing 35 mixin implementations, 75 hook handlers 2023-03-29 00:36:10,970 - octoprint.server.heartbeat - INFO - Starting server heartbeat, 900.0s interval 2023-03-29 00:36:11,224 - octoprint.server - INFO - Intermediary server started 2023-03-29 00:36:11,268 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/pi/.octoprint/uploads... 2023-03-29 00:36:11,341 - octoprint.filemanager.storage - INFO - ... file metadata for /home/pi/.octoprint/uploads initialized successfully. 2023-03-29 00:36:11,350 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_SHOW (needs: "Need(method='role', value='plugin_action_command_notification_show')") 2023-03-29 00:36:11,351 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_CLEAR (needs: "Need(method='role', value='plugin_action_command_notification_clear')") 2023-03-29 00:36:11,352 - octoprint.server - INFO - Added new permission from plugin action_command_prompt: PLUGIN_ACTION_COMMAND_PROMPT_INTERACT (needs: "Need(method='role', value='plugin_action_command_prompt_interact')") 2023-03-29 00:36:11,353 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_READ (needs: "Need(method='role', value='plugin_announcements_read')") 2023-03-29 00:36:11,354 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_MANAGE (needs: "Need(method='role', value='plugin_announcements_read'), Need(method='role', value='plugin_announcements_manage')") 2023-03-29 00:36:11,355 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_ADMIN (needs: "Need(method='role', value='plugin_appkeys_admin')") 2023-03-29 00:36:11,357 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_GRANT (needs: "Need(method='role', value='plugin_appkeys_user')") 2023-03-29 00:36:11,365 - octoprint.server - INFO - Added new permission from plugin backup: PLUGIN_BACKUP_ACCESS (needs: "Need(method='role', value='plugin_backup_access')") 2023-03-29 00:36:11,368 - octoprint.server - INFO - Added new permission from plugin firmware_check: PLUGIN_FIRMWARE_CHECK_DISPLAY (needs: "Need(method='role', value='plugin_firmware_check_display')") 2023-03-29 00:36:11,369 - octoprint.server - INFO - Added new permission from plugin logging: PLUGIN_LOGGING_MANAGE (needs: "Need(method='role', value='plugin_logging_manage')") 2023-03-29 00:36:11,370 - octoprint.server - INFO - Added new permission from plugin pi_support: PLUGIN_PI_SUPPORT_STATUS (needs: "Need(method='role', value='plugin_pi_support_check')") 2023-03-29 00:36:11,371 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_LIST (needs: "Need(method='role', value='plugin_pluginmanager_list')") 2023-03-29 00:36:11,372 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_MANAGE (needs: "Need(method='role', value='plugin_pluginmanager_manage')") 2023-03-29 00:36:11,374 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_INSTALL (needs: "Need(method='role', value='plugin_pluginmanager_install'), Need(method='role', value='plugin_pluginmanager_manage')") 2023-03-29 00:36:11,380 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CHECK (needs: "Need(method='role', value='plugin_softwareupdate_check')") 2023-03-29 00:36:11,382 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_UPDATE (needs: "Need(method='role', value='plugin_softwareupdate_update')") 2023-03-29 00:36:11,385 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CONFIGURE (needs: "Need(method='role', value='plugin_softwareupdate_configure')") 2023-03-29 00:36:13,733 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2023-03-29 00:36:15,581 - octoprint.util.pip - INFO - Version of pip is 22.3 2023-03-29 00:36:15,593 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2023-03-29 00:36:15,594 - octoprint.util.pip - INFO - ==> pip ok -> yes 2023-03-29 00:36:15,996 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk 2023-03-29 00:36:16,033 - octoprint.plugins.softwareupdate - INFO - Loaded update log from disk 2023-03-29 00:36:16,262 - octoprint.plugins.firmwareupdater - INFO - Python binproto2 package installed: False 2023-03-29 00:36:16,642 - octoprint.plugin.core - INFO - Initialized 35 plugin implementation(s) 2023-03-29 00:36:22,096 - octoprint.plugins.uicustomizer - INFO - Downloaded theme: https://lazemss.github.io/OctoPrint-UICustomizerThemes/css/cyborg.css into: /home/pi/oprint/lib/python3.9/site-packages/octoprint_uicustomizer/static/themes/css/cyborg.css 2023-03-29 00:36:22,534 - octoprint.plugin.core - INFO - 36 plugin(s) registered with the system: | ABL Expert Plugin (0.6) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_ABL_Expert | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/appkeys | Backup & Restore (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/backup | Bed Visualizer (1.1.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_bedlevelvisualizer | Calibration Tools (1.0.4) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_CalibrationTools | Core Wizard (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/corewizard | !Detailed Progress (0.2.7) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_detailedprogress | Discovery (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/discovery | DisplayLayerProgress Plugin (1.28.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_DisplayLayerProgress | DisplayZ (0.2.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_displayz | Error Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/errortracking | Event Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/eventmanager | Filament Manager (1.9.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_filamentmanager | File Check (2021.2.23) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_file_check | Firmware Check (2021.10.11) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmware_check | Firmware Updater (1.14.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmwareupdater | GCode Viewer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/gcodeviewer | HeaterTimeout (0.0.4) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_HeaterTimeout | Logging (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/logging | Navbar Temperature Plugin (0.15) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_navbartemp | Octoprint Display ETA (2.2.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_display_eta | Pi Support Plugin (2022.6.13) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/pluginmanager | Preheat Button (0.8.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_preheat | Print History Plugin (1.3) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_printhistory | Printer Stats (3.1.3) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_stats | Simple Emergency Stop (1.0.5) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_simpleemergencystop | Software Update (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/softwareupdate | Touchtest Plugin (0.4.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_touchtest | UI Customizer (0.1.9.4) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_uicustomizer | Virtual Printer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/virtual_printer | Z Probe Offset (0.5) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_z_probe_offset Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2023-03-29 00:36:22,601 - octoprint.environment - INFO - Detected environment is Python 3.9.2 under Linux (linux). Details: | hardware: | cores: 4 | freq: 1200.0 | ram: 912883712 | os: | bits: 32 | id: linux | platform: linux | plugins: | pi_support: | model: Raspberry Pi 3 Model B Rev 1.2 | octopi_version: 1.0.0 | throttle_check_enabled: true | throttle_check_functional: true | throttle_state: '0x0' | python: | pip: '22.3' | version: 3.9.2 | virtualenv: /home/pi/oprint 2023-03-29 00:36:22,635 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/webassets... 2023-03-29 00:36:22,638 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-cache... 2023-03-29 00:36:22,640 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-manifest.json... 2023-03-29 00:36:22,737 - octoprint.server.util.flask.collect_plugin_assets - WARNING - Plugin simpleemergencystop is referring to non existing css asset css/fontawesome.all.min.css 2023-03-29 00:36:22,954 - octoprint.plugins.DisplayLayerProgress - WARNING - The Blueprint of this plugin is relying on the default implementation of is_blueprint_csrf_protected (newly added in OctoPrint 1.8.3), which in a future version will be switched from False to True for security reasons. Plugin authors should ensure they explicitly declare the CSRF protection status in their BlueprintPlugin mixin implementation. Recommendation is to enable CSRF protection and exempt views that must not use it with the octoprint.plugin.BlueprintPlugin.csrf_exempt decorator. 2023-03-29 00:36:22,955 - octoprint.server - WARNING - CSRF Protection for Blueprint of plugin DisplayLayerProgress is DISABLED 2023-03-29 00:36:22,959 - octoprint.plugins.bedlevelvisualizer - WARNING - The Blueprint of this plugin is relying on the default implementation of is_blueprint_csrf_protected (newly added in OctoPrint 1.8.3), which in a future version will be switched from False to True for security reasons. Plugin authors should ensure they explicitly declare the CSRF protection status in their BlueprintPlugin mixin implementation. Recommendation is to enable CSRF protection and exempt views that must not use it with the octoprint.plugin.BlueprintPlugin.csrf_exempt decorator. 2023-03-29 00:36:22,961 - octoprint.server - WARNING - CSRF Protection for Blueprint of plugin bedlevelvisualizer is DISABLED 2023-03-29 00:36:22,969 - octoprint.plugins.filamentmanager - WARNING - The Blueprint of this plugin is relying on the default implementation of is_blueprint_csrf_protected (newly added in OctoPrint 1.8.3), which in a future version will be switched from False to True for security reasons. Plugin authors should ensure they explicitly declare the CSRF protection status in their BlueprintPlugin mixin implementation. Recommendation is to enable CSRF protection and exempt views that must not use it with the octoprint.plugin.BlueprintPlugin.csrf_exempt decorator. 2023-03-29 00:36:22,969 - octoprint.server - WARNING - CSRF Protection for Blueprint of plugin filamentmanager is DISABLED 2023-03-29 00:36:22,977 - octoprint.plugins.printhistory - WARNING - The Blueprint of this plugin is relying on the default implementation of is_blueprint_csrf_protected (newly added in OctoPrint 1.8.3), which in a future version will be switched from False to True for security reasons. Plugin authors should ensure they explicitly declare the CSRF protection status in their BlueprintPlugin mixin implementation. Recommendation is to enable CSRF protection and exempt views that must not use it with the octoprint.plugin.BlueprintPlugin.csrf_exempt decorator. 2023-03-29 00:36:22,978 - octoprint.server - WARNING - CSRF Protection for Blueprint of plugin printhistory is DISABLED 2023-03-29 00:36:23,892 - octoprint.plugins.firmwareupdater - INFO - Setting maximum upload size for /flash to 5243904 2023-03-29 00:36:23,893 - octoprint.server - INFO - Shutting down intermediary server... 2023-03-29 00:36:24,265 - octoprint.server - INFO - Intermediary server shut down 2023-03-29 00:36:24,273 - octoprint.events - INFO - Processing startup event, this is our first event 2023-03-29 00:36:24,274 - octoprint.events - INFO - Adding 1 events to queue that were held back before startup event 2023-03-29 00:36:24,275 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue... 2023-03-29 00:36:24,285 - octoprint.server - INFO - Autoconnect on startup is configured, trying to connect to the printer... 2023-03-29 00:36:24,306 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue 2023-03-29 00:36:24,364 - octoprint.server - INFO - Trying to connect to configured serial port None 2023-03-29 00:36:24,705 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2023-03-29 00:36:24,715 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder... 2023-03-29 00:36:24,721 - octoprint.server.util.watchdog - INFO - ... initial scan done. 2023-03-29 00:36:24,821 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 7 port/baudrate candidates: /dev/ttyUSB0@115200, /dev/ttyUSB0@250000, /dev/ttyUSB0@230400, /dev/ttyUSB0@57600, /dev/ttyUSB0@38400, /dev/ttyUSB0@19200, /dev/ttyUSB0@9600 2023-03-29 00:36:24,822 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200 2023-03-29 00:36:24,834 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200 2023-03-29 00:36:24,881 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2023-03-29 00:36:24,891 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2023-03-29 00:36:24,904 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Operational" 2023-03-29 00:36:24,925 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2023-03-29 00:36:24,958 - octoprint.plugins.firmwareupdater - INFO - Got CONNECTED event 2023-03-29 00:36:24,976 - octoprint.plugins.firmwareupdater - INFO - Run postflash flag is not set 2023-03-29 00:36:24,979 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2023-03-29 00:36:25,076 - octoprint.util.comm - INFO - Printer reports firmware name "1.0.13" 2023-03-29 00:36:25,098 - octoprint.plugins.firmwareupdater - INFO - Setting BINARY_FILE_TRANSFER capability to False 2023-03-29 00:36:25,110 - octoprint.plugins.ABL_Expert - INFO - self.printer_cap[eeprom] is now 1 2023-03-29 00:36:25,116 - octoprint.plugins.z_probe_offset - INFO - Printer_cap[eeprom]:1 2023-03-29 00:36:25,126 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting 2023-03-29 00:36:25,140 - octoprint.plugins.ABL_Expert - INFO - self.printer_cap[autolevel] is now 1 2023-03-29 00:36:25,155 - octoprint.plugins.ABL_Expert - INFO - self.printer_cap[z_probe] is now 1 2023-03-29 00:36:25,155 - octoprint.plugins.z_probe_offset - INFO - Printer_cap[z_probe]:1 2023-03-29 00:36:25,159 - octoprint.plugins.ABL_Expert - INFO - self.printer_cap[leveling_data] is now 1 2023-03-29 00:36:25,183 - octoprint.util.comm - INFO - Firmware states that it supports emergency GCODEs to be sent without waiting for an acknowledgement first 2023-03-29 00:36:25,683 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance "CR10 Smart Pro 2"._http._tcp.local.' for _http._tcp.local. 2023-03-29 00:36:26,477 - octoprint.util.comm - INFO - Externally triggered heatup detected 2023-03-29 00:36:26,490 - octoprint.plugins.z_probe_offset - INFO - Z probe offset is now -3.82 2023-03-29 00:36:26,524 - octoprint.plugins.ABL_Expert - INFO - Grid mesh size is 5 2023-03-29 00:36:26,549 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance "CR10 Smart Pro 2"._octoprint._tcp.local.' for _octoprint._tcp.local. 2023-03-29 00:36:26,593 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance "CR10 Smart Pro 2" for SSDP 2023-03-29 00:36:26,628 - octoprint.plugins.ABL_Expert - INFO - Grid mesh size is 13 2023-03-29 00:36:26,673 - octoprint.server - INFO - Listening on http://127.0.0.1:5000 2023-03-29 00:36:26,788 - octoprint.plugins.z_probe_offset - INFO - Z probe offset is now -3.82 2023-03-29 00:36:26,937 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2023-03-29 00:36:27,949 - octoprint.plugins.announcements - INFO - Loaded channel _important from https://octoprint.org/feeds/important.xml in 0.99s 2023-03-29 00:36:28,899 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2023-03-29 00:36:28,903 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2023-03-29 00:36:28,914 - octoprint.util.pip - INFO - ==> pip ok -> yes 2023-03-29 00:36:29,010 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 23.9GB. That is considered sufficient for updating. 2023-03-29 00:36:29,018 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json 2023-03-29 00:36:30,044 - octoprint.plugins.announcements - INFO - Loaded channel _releases from https://octoprint.org/feeds/releases.xml in 1.4s 2023-03-29 00:36:30,718 - octoprint.plugins.HeaterTimeout - INFO - Starting up... 2023-03-29 00:36:30,723 - octoprint.plugins.bedlevelvisualizer - INFO - OctoPrint-BedLevelVisualizer loaded! 2023-03-29 00:36:30,883 - octoprint.plugins.stats - INFO - Printer Stats 2023-03-29 00:36:30,909 - octoprint.plugins.uicustomizer - INFO - UI Customizer is initialized. 2023-03-29 00:36:31,304 - octoprint.plugins.tracking - INFO - Sent tracking event system_unthrottled, payload: {'throttled_now': False, 'throttled_past': False, 'throttled_mask': 0, 'throttled_voltage_now': False, 'throttled_voltage_past': False, 'throttled_overheat_now': False, 'throttled_overheat_past': False} 2023-03-29 00:36:31,354 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'http://192.168.1.249/', 'path': '/', 'query_string': 'l10n=en'} 2023-03-29 00:36:31,499 - octoprint.plugins.announcements - INFO - Loaded channel _blog from https://octoprint.org/feeds/octoblog.xml in 1.2s 2023-03-29 00:36:32,129 - octoprint.plugins.pluginmanager - INFO - Loaded plugin notices data from https://plugins.octoprint.org/notices.json 2023-03-29 00:36:32,598 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {'firmware_name': '1.0.13', 'printer_port': None, 'printer_baudrate': 0} 2023-03-29 00:36:32,819 - octoprint.plugins.announcements - INFO - Loaded channel _plugins from https://plugins.octoprint.org/feed.xml in 1.1s 2023-03-29 00:36:33,858 - octoprint.plugins.tracking - INFO - Sent tracking event pong, payload: {'version': '1.8.7', 'os': 'linux', 'bits': 32, 'python': '3.9.2', 'pip': '22.3', 'cores': 4, 'freq': 1200.0, 'ram': 912883712, 'pi_model': 'Raspberry Pi 3 Model B Rev 1.2', 'octopi_version': '1.0.0', 'plugins': 'z_probe_offset:0.5,uicustomizer:0.1.9.4,preheat:0.8.0,touchtest:0.4.1,stats:3.1.3,simpleemergencystop:1.0.5,printhistory:1.3,navbartemp:0.15,heatertimeout:0.0.4,firmwareupdater:1.14.0,filamentmanager:1.9.1,displayz:0.2.0,display_eta:2.2.0,calibrationtools:1.0.4,displaylayerprogress:1.28.0,bedlevelvisualizer:1.1.1,abl_expert:0.6'} 2023-03-29 00:36:34,040 - octoprint.plugins.announcements - INFO - Loaded channel _octopi from https://octoprint.org/feeds/octopi.xml in 0.93s 2023-03-29 00:36:34,993 - octoprint.plugins.tracking - INFO - Sent tracking event startup, payload: {'version': '1.8.7', 'os': 'linux', 'bits': 32, 'python': '3.9.2', 'pip': '22.3', 'cores': 4, 'freq': 1200.0, 'ram': 912883712, 'pi_model': 'Raspberry Pi 3 Model B Rev 1.2', 'octopi_version': '1.0.0'} 2023-03-29 00:36:36,270 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 26, 'printer_state': 'OPERATIONAL'} 2023-03-29 00:36:48,231 - octoprint.server.util.flask - INFO - Passively logging in user jdthomas24 from ::ffff:192.168.1.49 2023-03-29 00:36:48,235 - octoprint.access.users - INFO - Logged in user: jdthomas24 2023-03-29 00:36:48,322 - octoprint.plugins.uicustomizer - INFO - Checking for updated themes 2023-03-29 00:36:48,396 - octoprint.server.util.flask - INFO - Passively logging in user jdthomas24 from ::ffff:192.168.1.49 2023-03-29 00:36:48,397 - octoprint.access.users - INFO - Logged in user: jdthomas24 2023-03-29 00:36:48,518 - octoprint.server.util.flask - INFO - Passively logging in user jdthomas24 from ::ffff:192.168.1.49 2023-03-29 00:36:48,526 - octoprint.access.users - INFO - Logged in user: jdthomas24 2023-03-29 00:36:51,244 - octoprint.server.preemptive_cache - INFO - ... done in 19.89s 2023-03-29 00:36:52,035 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.49 2023-03-29 00:36:52,217 - octoprint.server.util.flask - INFO - Passively logging in user jdthomas24 from ::ffff:192.168.1.49 2023-03-29 00:36:52,217 - octoprint.access.users - INFO - Logged in user: jdthomas24 2023-03-29 00:36:57,950 - octoprint.server.util.sockjs - INFO - User jdthomas24 logged in on the socket from client ::ffff:192.168.1.49 2023-03-29 00:37:04,675 - octoprint.plugins.tracking - INFO - Sent tracking event webui_load, payload: {'browser_name': 'Chrome', 'browser_version': '111.0.0.0', 'os_name': 'Mac OS', 'os_version': '10.15.7'} 2023-03-29 00:37:15,249 - octoprint.plugins.DisplayLayerProgress - INFO - Limit of 750 reached and no M117 INDICATOR-Layer found 2023-03-29 00:37:15,252 - octoprint.plugins.DisplayLayerProgress - INFO - FilePreProcessor. Checking LayerExpressions. 2023-03-29 00:37:15,252 - octoprint.plugins.DisplayLayerProgress - INFO - FilePreProcessor. LayerExpression valid. Start processing... 2023-03-29 00:37:18,418 - octoprint.filemanager.analysis - INFO - Starting analysis of local:Samsung GTab A7- 8.7 2022.gcode 2023-03-29 00:37:18,438 - octoprint.filemanager.analysis - INFO - Invoking analysis command: /home/pi/oprint/bin/python -m octoprint analysis gcode --speed-x=6000 --speed-y=6000 --max-t=10 --throttle=0.0 --throttle-lines=100 --bed-z=0.0 /home/pi/.octoprint/uploads/Samsung GTab A7- 8.7 2022.gcode 2023-03-29 00:37:18,531 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2023-03-29 00:37:26,569 - octoprint.printer.standard.job - INFO - Print job selected - origin: local, path: Samsung GTab A7- 8.7 2022.gcode, owner: jdthomas24, user: jdthomas24 2023-03-29 00:37:26,630 - octoprint.plugins.DisplayLayerProgress - INFO - File '/home/pi/.octoprint/uploads/Samsung GTab A7- 8.7 2022.gcode' selected. Determining number of layers. 2023-03-29 00:37:26,640 - octoprint.plugins.DisplayLayerProgress - INFO - Read total height from MetaFile 2023-03-29 00:37:26,683 - octoprint.plugins.DisplayLayerProgress - INFO - Total height not found in MetaFile 2023-03-29 00:37:26,687 - octoprint.util.comm - INFO - Starting job on behalf of user jdthomas24 2023-03-29 00:37:26,705 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting" 2023-03-29 00:37:26,715 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: Samsung GTab A7- 8.7 2022.gcode, owner: jdthomas24, user: jdthomas24 2023-03-29 00:37:26,833 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer. 2023-03-29 00:37:26,986 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2023-03-29 00:37:27,064 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Printing" 2023-03-29 00:37:28,442 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile 2023-03-29 00:37:28,481 - octoprint.plugins.DisplayLayerProgress - INFO - File select-event processing done!' 2023-03-29 00:37:28,703 - octoprint.plugins.DisplayLayerProgress - INFO - Printing started. Detailed progress started.{'name': 'Samsung GTab A7- 8.7 2022.gcode', 'path': 'Samsung GTab A7- 8.7 2022.gcode', 'origin': 'local', 'size': 3690821, 'owner': 'jdthomas24', 'user': 'jdthomas24'} 2023-03-29 00:37:28,747 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2023-03-29 00:37:29,268 - octoprint.util.comm - INFO - Printer seems to support the busy protocol, will adjust timeouts and set busy interval accordingly 2023-03-29 00:37:30,202 - octoprint.plugins.tracking - INFO - Sent tracking event print_started, payload: {'origin': 'local', 'file': '21c3eb6c813ea2f7f4a515c3211f8084127227c4'} 2023-03-29 00:39:54,962 - octoprint.util.comm - INFO - Telling the printer to set the busy interval to our "communicationBusy" timeout - 1s = 2s 2023-03-29 00:51:10,973 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-29 00:51:31,810 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 926, 'printer_state': 'PRINTING'} 2023-03-29 01:06:10,975 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-29 01:06:31,350 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 1826, 'printer_state': 'PRINTING'} 2023-03-29 01:21:10,977 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-29 01:21:31,349 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 2726, 'printer_state': 'PRINTING'} 2023-03-29 01:36:10,979 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-29 01:36:31,374 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 3626, 'printer_state': 'PRINTING'} 2023-03-29 01:51:10,981 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-29 01:51:31,351 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 4526, 'printer_state': 'PRINTING'} 2023-03-29 02:06:10,984 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-29 02:06:31,436 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 5426, 'printer_state': 'PRINTING'} 2023-03-29 02:21:10,986 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-29 02:21:31,534 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 6327, 'printer_state': 'PRINTING'} 2023-03-29 02:36:10,987 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-29 02:36:31,505 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 7227, 'printer_state': 'PRINTING'} 2023-03-29 02:48:40,268 - octoprint.server.util.flask - INFO - Passively logging in user jdthomas24 from ::ffff:192.168.1.33 2023-03-29 02:48:40,271 - octoprint.access.users - INFO - Logged in user: jdthomas24 2023-03-29 02:48:40,292 - octoprint.plugins.uicustomizer - INFO - Checking for updated themes 2023-03-29 02:48:40,494 - octoprint.server.util.flask - INFO - Passively logging in user jdthomas24 from ::ffff:192.168.1.33 2023-03-29 02:48:40,495 - octoprint.access.users - INFO - Logged in user: jdthomas24 2023-03-29 02:48:40,610 - octoprint.server.util.flask - INFO - Passively logging in user jdthomas24 from ::ffff:192.168.1.33 2023-03-29 02:48:40,611 - octoprint.access.users - INFO - Logged in user: jdthomas24 2023-03-29 02:48:45,324 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.33 2023-03-29 02:48:45,735 - octoprint.server.util.flask - INFO - Passively logging in user jdthomas24 from ::ffff:192.168.1.33 2023-03-29 02:48:45,736 - octoprint.access.users - INFO - Logged in user: jdthomas24 2023-03-29 02:48:56,764 - octoprint.server.util.sockjs - INFO - User jdthomas24 logged in on the socket from client ::ffff:192.168.1.33 2023-03-29 02:49:00,031 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2023-03-29 02:49:00,033 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2023-03-29 02:49:00,034 - octoprint.util.pip - INFO - ==> pip ok -> yes 2023-03-29 02:49:01,748 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk 2023-03-29 02:49:07,486 - octoprint.util.comm - INFO - Cancelling job on behalf of user jdthomas24 2023-03-29 02:49:07,489 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Cancelling" 2023-03-29 02:49:07,494 - octoprint.filemanager.analysis - INFO - Starting analysis of local:Samsung GTab A7- 8.7 2022.gcode 2023-03-29 02:49:07,495 - octoprint.util.comm - INFO - Force-sending M108 to the printer 2023-03-29 02:49:07,533 - octoprint.filemanager.analysis - INFO - Invoking analysis command: /home/pi/oprint/bin/python -m octoprint analysis gcode --speed-x=6000 --speed-y=6000 --max-t=10 --throttle=0.0 --throttle-lines=100 --bed-z=0.0 /home/pi/.octoprint/uploads/Samsung GTab A7- 8.7 2022.gcode 2023-03-29 02:49:07,585 - octoprint.printer.standard.job - INFO - Print job cancelled - origin: local, path: Samsung GTab A7- 8.7 2022.gcode, owner: jdthomas24, user: jdthomas24 2023-03-29 02:49:07,787 - octoprint.plugins.DisplayLayerProgress - INFO - Printing stopped. Detailed progress stopped. 2023-03-29 02:49:07,830 - octoprint.plugins.filamentmanager - INFO - Updating Filament usage for octoprint configured toolcount: 1 2023-03-29 02:49:07,831 - octoprint.plugins.filamentmanager - INFO - Filament tracked toolcount: 1 2023-03-29 02:49:07,831 - octoprint.plugins.filamentmanager - INFO - Filament tracked values: [7973.202900000947] 2023-03-29 02:49:07,832 - octoprint.plugins.filamentmanager - INFO - Filament used: 7973.202900000947 mm (tool0) 2023-03-29 02:49:07,864 - octoprint.plugins.filamentmanager - WARNING - No selected spool for tool0 2023-03-29 02:49:07,934 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2023-03-29 02:49:08,029 - octoprint.plugins.tracking - INFO - Sent tracking event webui_load, payload: {'browser_name': 'Silk', 'browser_version': '104.3.37', 'os_name': 'Android', 'os_version': '5.1.1'} 2023-03-29 02:49:08,587 - octoprint.plugins.printhistory - INFO - fileData not found 2023-03-29 02:49:08,819 - octoprint.plugins.tracking - INFO - Sent tracking event print_cancelled, payload: {'origin': 'local', 'file': '21c3eb6c813ea2f7f4a515c3211f8084127227c4', 'elapsed': 7900} 2023-03-29 02:49:08,843 - octoprint.plugins.DisplayLayerProgress - INFO - Printing stopped. Detailed progress stopped. 2023-03-29 02:49:08,880 - octoprint.plugins.printhistory - INFO - Name: Samsung GTab A7- 8.7 2022.gcode 2023-03-29 02:49:08,881 - octoprint.plugins.printhistory - INFO - Origin: local 2023-03-29 02:49:08,882 - octoprint.plugins.printhistory - INFO - Path: Samsung GTab A7- 8.7 2022.gcode 2023-03-29 02:49:08,889 - octoprint.plugins.printhistory - INFO - Path_On_disk: /home/pi/.octoprint/uploads/Samsung GTab A7- 8.7 2022.gcode 2023-03-29 02:49:08,899 - octoprint.plugins.printhistory - INFO - Got metadata from name 2023-03-29 02:49:08,902 - octoprint.plugins.printhistory - INFO - found fileData 2023-03-29 02:49:08,948 - octoprint.plugins.printhistory - INFO - {"processName": "Process 1", "targetModels": "\"Galaxy Tab A7- 8.7\"\" 2022\"", "profileName": "Tablets 11/2018", "profileVersion": "2022-12-03 15:15:43", "app": "S3D-Software 5.0.0", "technology": "fff", "baseProfile": "Creality CR-10(2)", "extruder": "Primary Extruder", "toolheadNumber": "0", "nozzleDiameter": "0.40000", "extrusionMultiplier": "1.00000", "extrusionWidthMode": "manual", "extrusionWidth": "0.40000", "useRetraction": "1", "retractDistance": "5.00000", "extraRestartDistance": "0.00000", "retractVerticalLift": "0.00000", "retractSpeed": "1000.00000", "useCoasting": "1", "coastingDistance": "0.20000", "useWiping": "0", "wipingDistance": "5.00000", "speedMaxFlowRate": "1000.00000", "toolheadOffsetX": "0.00000", "toolheadOffsetY": "0.00000", "filamentDiameter": "1.75000", "filamentPricePerKilogram": "18.00000", "filamentDensity": "1.25000", "primaryExtruder": "Primary Extruder", "layerHeight": "0.20000", "topSolidLayers": "4", "bottomSolidLayers": "4", "outlinePerimeters": "3", "useVaseMode": "0", "useAdaptiveLayerHeights": "0", "minAdaptiveLayerHeight": "0.10000", "maxAdaptiveLayerHeight": "0.30000", "adaptiveSmoothingLevel": "5", "horizontalOuterCompensation": "0.00000", "horizontalInnerCompensation": "0.00000", "firstLayerUnits": "percentage", "firstLayerHeightPercentage": "100", "firstLayerWidthPercentage": "100", "firstLayerSpeedPercentage": "50", "firstLayerHeightAbsolute": "0.30000", "firstLayerWidthAbsolute": "0.40000", "firstLayerSpeedAbsolute": "900.00000", "startPointStrategy": "closest", "alignStartPointsX": "0.00000", "alignStartPointsY": "0.00000", "restrictStartPoints": "1", "perimeterPrintingOrder": "inside_out", "islandPrintingOrder": "closest", "printInfillBeforePerimeters": "0", "useSkirt": "0", "skirtExtruder": "Primary Extruder", "skirtLayers": "1", "skirtOffset": "0.00000", "skirtOutlines": "5", "useRaft": "0", "raftExtruder": "Primary Extruder", "raftBaseLayers": "2", "raftTopLayers": "3", "raftOffset": "3.00000", "raftSeparationDistance": "0.14000", "raftSpeedUnits": "percentage", "raftSpeedPercentage": "30", "raftSpeedAbsolute": "600.00000", "usePrimePillar": "0", "primePillarExtruder": "All Extruders", "primePillarWidth": "12.00000", "primePillarLocation": "north_west", "primePillarSpeedPercentage": "100", "primePillarInfillPercentage": "100", "autoStopPrimePillar": "1", "primePillarLayersAfterAutoStop": "0", "useOozeShield": "0", "oozeShieldExtruder": "All Extruders", "oozeShieldOffset": "2.00000", "oozeShieldOutlines": "1", "oozeShieldSidewallShape": "waterfall", "oozeShieldSidewallAngle": "30", "oozeShieldSpeedPercentage": "100", "autoStopOozeShield": "1", "oozeShieldLayersAfterAutoStop": "0", "sparseInfillExtruder": "Primary Extruder", "sparseInfillPattern": "rectilinear", "sparseInfillRotation": "0", "sparseInfillPercentage": "25", "sparseInfillExtrusionWidthPercentage": "100", "sparseInfillCombinedLayers": "1", "denseInfillLayers": "0", "denseInfillPercentage": "50", "infillOutlineOverlapPercentage": "13", "minInfillLength": "5.00000", "externalInfillPattern": "rectilinear", "externalInfillRotation": "0", "solidInfillThresholdArea": "25.00000", "solidInfillExtraExpansion": "0.00000", "useDiaphragm": "0", "diaphragmSolidLayers": "3", "diaphragmSpacingLayers": "20", "sparseSupportExtruder": "Primary Extruder", "sparseSupportInfillPattern": "aligned", "sparseSupportInfillRotation": "0", "sparseSupportInfillPercentage": "25", "sparseSupportOutlines": "0", "sparseSupportCombinedLayers": "1", "upperDenseSupportLayers": "0", "lowerDenseSupportLayers": "0", "denseSupportExtruder": "Primary Extruder", "denseSupportInfillPercentage": "85", "denseSupportExtraExpansion": "0.00000", "baseSupportLayers": "0", "supportInflationDistance": "0.00000", "supportHorizontalPartOffset": "0.43000", "supportUpperSeparationLayers": "1", "supportLowerSeparationLayers": "1", "temperatureController": "Heated Bed", "enableTemperatureController": "1", "temperatureNumber": "0", "temperatureType": "platform", "stabilizeAtStartup": "1", "temperatureSetpoints": "1|50", "useIdleCooldown": "0", "cooldownTemperature": "150", "cooldownRequiredIdleTime": "180", "cooldownReheatTime": "60", "fan": "Cooling Fan", "fanNumber": "0", "fanType": "extruder", "blipFanToFullPower": "0", "fanSetpoints": "1|0,2|10,15|60", "increaseFanForQuickLayers": "0", "fanMaxQuickLayerTime": "45.00000", "fanMinQuickLayerTime": "15.00000", "maxQuickLayerFanSpeedPercentage": "100", "defaultPrintSpeed": "3200.00000", "outerPerimeterSpeedPercentage": "50", "innerPerimeterSpeedPercentage": "80", "solidInfillSpeedPercentage": "80", "sparseSupportSpeedPercentage": "80", "denseSupportSpeedPercentage": "70", "travelSpeedXY": "3200.00000", "travelSpeedZ": "1000.00000", "reduceSpeedForQuickLayers": "1", "speedMaxQuickLayerTime": "15.00000", "minQuickLayerSpeedPercentage": "20", "reduceSpeedForShortPerimeters": "1", "speedMaxShortPerimeterLength": "80.00000", "minShortPerimeterSpeedPercentage": "50", "reduceSpeedForMaxFlowRate": "0", "accelXY": "1000.00000", "accelZ": "150.00000", "accelE": "3000.00000", "jerkXY": "600.00000", "jerkZ": "24.00000", "jerkE": "300.00000", "exportFileFormat": "gcode", "useStickyCommands": "1", "use5D": "1", "relativeExtrusionDistances": "0", "allowExtruderAxisZeroing": "1", "independentExtruderAxes": "0", "includeM10123": "0", "x3gMachineProfile": "r2", "overrideStepsPerMillimeter": "0", "stepsPerMillimeterX": "88.57319", "stepsPerMillimeterY": "88.57319", "stepsPerMillimeterZ": "400.00000", "stepsPerMillimeterA": "96.27520", "stepsPerMillimeterB": "96.27520", "xyzFileFormatVersion": "1", "makerBotMachineProfile": "replicator_5", "makerBotModelExtruder": "mk13", "makerBotSupportExtruder": "mk14_s", "makerBotModelMaterial": "pla", "makerBotSupportMaterial": "pva", "globalOffsetX": "0.00000", "globalOffsetY": "0.00000", "globalOffsetZ": "0.00000", "applyToolheadOffsets": "0", "buildVolumeShape": "rectangular", "buildVolumeX": "300.00000", "buildVolumeY": "300.00000", "buildVolumeZ": "400.00000", "buildVolumeDiameter": "200.00000", "originOffsetX": "0.00000", "originOffsetY": "0.00000", "originOffsetZ": "0.00000", "homingDirectionX": "min", "homingDirectionY": "min", "homingDirectionZ": "min", "mirrorVisualX": "0", "mirrorVisualY": "1", "mirrorVisualZ": "0", "machineBackgroundModel": "", "startingScript": "G28", "preLayerChangeScript": "", "postLayerChangeScript": "", "preRetractionScript": "", "postRetractionScript": "", "preToolChangeScript": "", "postToolChangeScript": "", "processChangeScript": "", "endingScript": "M104 S0", "postProcessingScript": "", "useBridging": "1", "bridgingThresholdArea": "50.00000", "bridgingInfillExtraExpansion": "0.00000", "bridgingExtrusionModifier": "100", "bridgingSpeedModifier": "100", "overrideFanSpeedForBridging": "0", "bridgingFanSpeedPercentage": "100", "useFixedBridgingAngle": "0", "fixedBridgingAngle": "0", "applyBridgingToPerimeters": "0", "bridgingPerimeterExtraOverlap": "0.00000", "minBridgingPerimeterLength": "10.00000", "useToolChangeRetraction": "1", "toolChangeRetractDistance": "12.00000", "toolChangeExtraRestartDistance": "-0.50000", "toolChangeRetractSpeed": "600.00000", "toolChangePrimeOnFirstUse": "0", "toolChangeRetractAtEnd": "0", "externalThinWallType": "perimeters_only", "internalThinWallType": "perimeters_only", "thinWallAllowedOverlapPercentage": "7", "singleExtrusionMinLength": "1.00000", "singleExtrusionMinWidthPercentage": "50", "singleExtrusionMaxWidthPercentage": "200", "singleExtrusionEndpointExtensionDistance": "0.20000", "onlyRetractWhenCrossingOutlines": "1", "retractBetweenLayers": "1", "useRetractionMinTravel": "0", "retractionMinTravel": "3.00000", "useRetractionMinExtrusion": "0", "retractionMinExtrusion": "3.00000", "retractWhileWiping": "0", "wipingMode": "outer_perimeter", "avoidCrossingOutlines": "0", "maxMovementDetourFactor": "3.00000", "openLoopSlicingBehavior": "heal", "openLoopThickenWidth": "0.50000", "slicingRegionRepairMode": "positive", "Material Cost": "1.72", "Material Weight": "95.30 g (0.21 lb)", "Material Volume": "76238.0 mm^3 (76.24 cc)", "Material Length": "31696.1 mm (31.70 m)", "Build Time": "7 hours 39 minutes", "slicer_name": "simplify3d", "slicer_version": "5.0.2"} 2023-03-29 02:49:09,091 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2023-03-29 02:49:09,700 - octoprint.plugins.tracking - INFO - Sent tracking event print_failed, payload: {'origin': 'local', 'file': '21c3eb6c813ea2f7f4a515c3211f8084127227c4', 'elapsed': 7900, 'reason': 'cancelled'} 2023-03-29 02:49:16,466 - octoprint.util.comm - INFO - Changing monitoring state from "Cancelling" to "Operational" 2023-03-29 02:49:29,460 - octoprint.filemanager.analysis - INFO - Analysis of entry local:Samsung GTab A7- 8.7 2022.gcode finished, needed 21.97s 2023-03-29 02:49:29,491 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile 2023-03-29 02:49:29,543 - octoprint.plugins.DisplayLayerProgress - INFO - Read total height from MetaFile 2023-03-29 02:49:36,942 - octoprint.util.comm - INFO - Starting job on behalf of user jdthomas24 2023-03-29 02:49:36,947 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting" 2023-03-29 02:49:36,964 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: Samsung GTab A7- 8.7 2022.gcode, owner: jdthomas24, user: jdthomas24 2023-03-29 02:49:37,259 - octoprint.plugins.DisplayLayerProgress - INFO - Printing started. Detailed progress started.{'name': 'Samsung GTab A7- 8.7 2022.gcode', 'path': 'Samsung GTab A7- 8.7 2022.gcode', 'origin': 'local', 'size': 3690821, 'owner': 'jdthomas24', 'user': 'jdthomas24'} 2023-03-29 02:49:37,350 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2023-03-29 02:49:37,370 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2023-03-29 02:49:37,390 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Printing" 2023-03-29 02:49:37,724 - octoprint.plugins.tracking - INFO - Sent tracking event print_started, payload: {'origin': 'local', 'file': '21c3eb6c813ea2f7f4a515c3211f8084127227c4'} 2023-03-29 02:51:10,990 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-29 02:51:31,420 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 8127, 'printer_state': 'PRINTING'} 2023-03-29 03:06:10,991 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-29 03:06:31,413 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 9027, 'printer_state': 'PRINTING'} 2023-03-29 03:21:10,993 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-29 03:21:31,432 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 9927, 'printer_state': 'PRINTING'} 2023-03-29 03:36:10,996 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-29 03:36:31,435 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 10827, 'printer_state': 'PRINTING'} 2023-03-29 03:51:10,998 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-29 03:51:31,470 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 11727, 'printer_state': 'PRINTING'} 2023-03-29 04:06:11,000 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-29 04:06:36,482 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 12627, 'printer_state': 'PRINTING'} 2023-03-29 04:21:11,002 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-29 04:21:31,662 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 13527, 'printer_state': 'PRINTING'} 2023-03-29 04:36:11,004 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-29 04:36:31,613 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 14427, 'printer_state': 'PRINTING'} 2023-03-29 04:51:11,006 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-29 04:51:31,524 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 15327, 'printer_state': 'PRINTING'} 2023-03-29 05:06:11,008 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-29 05:06:31,571 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 16227, 'printer_state': 'PRINTING'} 2023-03-29 05:21:11,010 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-29 05:21:31,573 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 17127, 'printer_state': 'PRINTING'} 2023-03-29 05:36:11,012 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-29 05:36:31,904 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 18027, 'printer_state': 'PRINTING'} 2023-03-29 05:51:11,014 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-29 05:51:31,610 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 18927, 'printer_state': 'PRINTING'} 2023-03-29 06:06:11,016 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-29 06:06:31,574 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 19827, 'printer_state': 'PRINTING'} 2023-03-29 06:21:11,018 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-29 06:21:31,590 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 20727, 'printer_state': 'PRINTING'} 2023-03-29 06:36:11,020 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-29 06:36:31,610 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 21627, 'printer_state': 'PRINTING'} 2023-03-29 06:51:11,022 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2023-03-29 06:51:31,613 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 22527, 'printer_state': 'PRINTING'} 2023-03-29 06:52:10,132 - octoprint.startup - INFO - ****************************************************************************** 2023-03-29 06:52:10,137 - octoprint.startup - INFO - Starting OctoPrint 1.8.7 2023-03-29 06:52:10,164 - octoprint.startup - INFO - ****************************************************************************** 2023-03-29 06:52:11,231 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: online 2023-03-29 06:52:11,231 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 1.1.1.1:53 is working 2023-03-29 06:52:11,232 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is working 2023-03-29 06:52:11,276 - octoprint.startup - INFO - Unable to fetch plugin blacklist from https://plugins.octoprint.org/blacklist.json, proceeding without it: HTTPSConnectionPool(host='plugins.octoprint.org', port=443): Max retries exceeded with url: /blacklist.json (Caused by NewConnectionError(': Failed to establish a new connection: [Errno -3] Temporary failure in name resolution')) 2023-03-29 06:52:11,277 - octoprint.startup - INFO - Blacklist processing done 2023-03-29 06:52:11,296 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2023-03-30 00:30:57,388 - octoprint.plugin.core - INFO - Plugin Detailed Progress (0.2.7) is disabled. 2023-03-30 00:30:58,007 - octoprint.plugins.errortracking - INFO - Initialized error tracking 2023-03-30 00:30:58,212 - octoprint.plugin.core - INFO - Found 36 plugin(s) providing 35 mixin implementations, 75 hook handlers 2023-03-30 00:30:58,680 - octoprint.server.heartbeat - INFO - Starting server heartbeat, 900.0s interval 2023-03-30 00:30:58,933 - octoprint.server - INFO - Intermediary server started 2023-03-30 00:30:58,977 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/pi/.octoprint/uploads... 2023-03-30 00:30:59,049 - octoprint.filemanager.storage - INFO - ... file metadata for /home/pi/.octoprint/uploads initialized successfully. 2023-03-30 00:30:59,058 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_SHOW (needs: "Need(method='role', value='plugin_action_command_notification_show')") 2023-03-30 00:30:59,058 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_CLEAR (needs: "Need(method='role', value='plugin_action_command_notification_clear')") 2023-03-30 00:30:59,059 - octoprint.server - INFO - Added new permission from plugin action_command_prompt: PLUGIN_ACTION_COMMAND_PROMPT_INTERACT (needs: "Need(method='role', value='plugin_action_command_prompt_interact')") 2023-03-30 00:30:59,060 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_READ (needs: "Need(method='role', value='plugin_announcements_read')") 2023-03-30 00:30:59,061 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_MANAGE (needs: "Need(method='role', value='plugin_announcements_read'), Need(method='role', value='plugin_announcements_manage')") 2023-03-30 00:30:59,062 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_ADMIN (needs: "Need(method='role', value='plugin_appkeys_admin')") 2023-03-30 00:30:59,069 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_GRANT (needs: "Need(method='role', value='plugin_appkeys_user')") 2023-03-30 00:30:59,070 - octoprint.server - INFO - Added new permission from plugin backup: PLUGIN_BACKUP_ACCESS (needs: "Need(method='role', value='plugin_backup_access')") 2023-03-30 00:30:59,071 - octoprint.server - INFO - Added new permission from plugin firmware_check: PLUGIN_FIRMWARE_CHECK_DISPLAY (needs: "Need(method='role', value='plugin_firmware_check_display')") 2023-03-30 00:30:59,073 - octoprint.server - INFO - Added new permission from plugin logging: PLUGIN_LOGGING_MANAGE (needs: "Need(method='role', value='plugin_logging_manage')") 2023-03-30 00:30:59,074 - octoprint.server - INFO - Added new permission from plugin pi_support: PLUGIN_PI_SUPPORT_STATUS (needs: "Need(method='role', value='plugin_pi_support_check')") 2023-03-30 00:30:59,077 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_LIST (needs: "Need(method='role', value='plugin_pluginmanager_list')") 2023-03-30 00:30:59,082 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_MANAGE (needs: "Need(method='role', value='plugin_pluginmanager_manage')") 2023-03-30 00:30:59,084 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_INSTALL (needs: "Need(method='role', value='plugin_pluginmanager_manage'), Need(method='role', value='plugin_pluginmanager_install')") 2023-03-30 00:30:59,087 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CHECK (needs: "Need(method='role', value='plugin_softwareupdate_check')") 2023-03-30 00:30:59,090 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_UPDATE (needs: "Need(method='role', value='plugin_softwareupdate_update')") 2023-03-30 00:30:59,092 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CONFIGURE (needs: "Need(method='role', value='plugin_softwareupdate_configure')") 2023-03-30 00:31:01,453 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2023-03-30 00:31:03,272 - octoprint.util.pip - INFO - Version of pip is 22.3 2023-03-30 00:31:03,285 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2023-03-30 00:31:03,285 - octoprint.util.pip - INFO - ==> pip ok -> yes 2023-03-30 00:31:03,686 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk 2023-03-30 00:31:03,724 - octoprint.plugins.softwareupdate - INFO - Loaded update log from disk 2023-03-30 00:31:03,955 - octoprint.plugins.firmwareupdater - INFO - Python binproto2 package installed: False 2023-03-30 00:31:04,337 - octoprint.plugin.core - INFO - Initialized 35 plugin implementation(s) 2023-03-30 00:31:04,639 - octoprint.plugins.uicustomizer - INFO - Downloaded theme: https://lazemss.github.io/OctoPrint-UICustomizerThemes/css/cyborg.css into: /home/pi/oprint/lib/python3.9/site-packages/octoprint_uicustomizer/static/themes/css/cyborg.css 2023-03-30 00:31:04,981 - octoprint.plugin.core - INFO - 36 plugin(s) registered with the system: | ABL Expert Plugin (0.6) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_ABL_Expert | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/appkeys | Backup & Restore (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/backup | Bed Visualizer (1.1.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_bedlevelvisualizer | Calibration Tools (1.0.4) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_CalibrationTools | Core Wizard (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/corewizard | !Detailed Progress (0.2.7) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_detailedprogress | Discovery (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/discovery | DisplayLayerProgress Plugin (1.28.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_DisplayLayerProgress | DisplayZ (0.2.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_displayz | Error Tracking (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/errortracking | Event Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/eventmanager | Filament Manager (1.9.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_filamentmanager | File Check (2021.2.23) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_file_check | Firmware Check (2021.10.11) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmware_check | Firmware Updater (1.14.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_firmwareupdater | GCode Viewer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/gcodeviewer | HeaterTimeout (0.0.4) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_HeaterTimeout | Logging (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/logging | Navbar Temperature Plugin (0.15) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_navbartemp | Octoprint Display ETA (2.2.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_display_eta | Pi Support Plugin (2022.6.13) (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/pluginmanager | Preheat Button (0.8.0) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_preheat | Print History Plugin (1.3) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_printhistory | Printer Stats (3.1.3) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_stats | Simple Emergency Stop (1.0.5) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_simpleemergencystop | Software Update (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/softwareupdate | Touchtest Plugin (0.4.1) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_touchtest | UI Customizer (0.1.9.4) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_uicustomizer | Virtual Printer (bundled) = /home/pi/oprint/lib/python3.9/site-packages/octoprint/plugins/virtual_printer | Z Probe Offset (0.5) = /home/pi/oprint/lib/python3.9/site-packages/octoprint_z_probe_offset Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2023-03-30 00:31:05,034 - octoprint.environment - INFO - Detected environment is Python 3.9.2 under Linux (linux). Details: | hardware: | cores: 4 | freq: 1200.0 | ram: 912883712 | os: | bits: 32 | id: linux | platform: linux | plugins: | pi_support: | model: Raspberry Pi 3 Model B Rev 1.2 | octopi_version: 1.0.0 | throttle_check_enabled: true | throttle_check_functional: true | throttle_state: '0x0' | python: | pip: '22.3' | version: 3.9.2 | virtualenv: /home/pi/oprint 2023-03-30 00:31:05,064 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/webassets... 2023-03-30 00:31:05,066 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-cache... 2023-03-30 00:31:05,068 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-manifest.json... 2023-03-30 00:31:05,197 - octoprint.server.util.flask.collect_plugin_assets - WARNING - Plugin simpleemergencystop is referring to non existing css asset css/fontawesome.all.min.css 2023-03-30 00:31:05,419 - octoprint.plugins.DisplayLayerProgress - WARNING - The Blueprint of this plugin is relying on the default implementation of is_blueprint_csrf_protected (newly added in OctoPrint 1.8.3), which in a future version will be switched from False to True for security reasons. Plugin authors should ensure they explicitly declare the CSRF protection status in their BlueprintPlugin mixin implementation. Recommendation is to enable CSRF protection and exempt views that must not use it with the octoprint.plugin.BlueprintPlugin.csrf_exempt decorator. 2023-03-30 00:31:05,420 - octoprint.server - WARNING - CSRF Protection for Blueprint of plugin DisplayLayerProgress is DISABLED 2023-03-30 00:31:05,425 - octoprint.plugins.bedlevelvisualizer - WARNING - The Blueprint of this plugin is relying on the default implementation of is_blueprint_csrf_protected (newly added in OctoPrint 1.8.3), which in a future version will be switched from False to True for security reasons. Plugin authors should ensure they explicitly declare the CSRF protection status in their BlueprintPlugin mixin implementation. Recommendation is to enable CSRF protection and exempt views that must not use it with the octoprint.plugin.BlueprintPlugin.csrf_exempt decorator. 2023-03-30 00:31:05,426 - octoprint.server - WARNING - CSRF Protection for Blueprint of plugin bedlevelvisualizer is DISABLED 2023-03-30 00:31:05,432 - octoprint.plugins.filamentmanager - WARNING - The Blueprint of this plugin is relying on the default implementation of is_blueprint_csrf_protected (newly added in OctoPrint 1.8.3), which in a future version will be switched from False to True for security reasons. Plugin authors should ensure they explicitly declare the CSRF protection status in their BlueprintPlugin mixin implementation. Recommendation is to enable CSRF protection and exempt views that must not use it with the octoprint.plugin.BlueprintPlugin.csrf_exempt decorator. 2023-03-30 00:31:05,433 - octoprint.server - WARNING - CSRF Protection for Blueprint of plugin filamentmanager is DISABLED 2023-03-30 00:31:05,440 - octoprint.plugins.printhistory - WARNING - The Blueprint of this plugin is relying on the default implementation of is_blueprint_csrf_protected (newly added in OctoPrint 1.8.3), which in a future version will be switched from False to True for security reasons. Plugin authors should ensure they explicitly declare the CSRF protection status in their BlueprintPlugin mixin implementation. Recommendation is to enable CSRF protection and exempt views that must not use it with the octoprint.plugin.BlueprintPlugin.csrf_exempt decorator. 2023-03-30 00:31:05,440 - octoprint.server - WARNING - CSRF Protection for Blueprint of plugin printhistory is DISABLED 2023-03-30 00:31:06,383 - octoprint.plugins.firmwareupdater - INFO - Setting maximum upload size for /flash to 5243904 2023-03-30 00:31:06,384 - octoprint.server - INFO - Shutting down intermediary server... 2023-03-30 00:31:06,387 - octoprint.server - INFO - Intermediary server shut down 2023-03-30 00:31:06,407 - octoprint.events - INFO - Processing startup event, this is our first event 2023-03-30 00:31:06,409 - octoprint.events - INFO - Adding 1 events to queue that were held back before startup event 2023-03-30 00:31:06,418 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue... 2023-03-30 00:31:06,423 - octoprint.server - INFO - Autoconnect on startup is configured, trying to connect to the printer... 2023-03-30 00:31:06,435 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue 2023-03-30 00:31:06,498 - octoprint.server - INFO - Trying to connect to configured serial port None 2023-03-30 00:31:06,834 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2023-03-30 00:31:06,886 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder... 2023-03-30 00:31:06,932 - octoprint.server.util.watchdog - INFO - ... initial scan done. 2023-03-30 00:31:06,952 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 7 port/baudrate candidates: /dev/ttyUSB0@115200, /dev/ttyUSB0@250000, /dev/ttyUSB0@230400, /dev/ttyUSB0@57600, /dev/ttyUSB0@38400, /dev/ttyUSB0@19200, /dev/ttyUSB0@9600 2023-03-30 00:31:06,959 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200 2023-03-30 00:31:06,977 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200 2023-03-30 00:31:07,012 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2023-03-30 00:31:07,022 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2023-03-30 00:31:07,035 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Operational" 2023-03-30 00:31:07,057 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2023-03-30 00:31:07,096 - octoprint.plugins.firmwareupdater - INFO - Got CONNECTED event 2023-03-30 00:31:07,109 - octoprint.plugins.firmwareupdater - INFO - Run postflash flag is not set 2023-03-30 00:31:07,120 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2023-03-30 00:31:07,231 - octoprint.util.comm - INFO - Printer reports firmware name "1.0.13" 2023-03-30 00:31:07,255 - octoprint.plugins.firmwareupdater - INFO - Setting BINARY_FILE_TRANSFER capability to False 2023-03-30 00:31:07,265 - octoprint.plugins.ABL_Expert - INFO - self.printer_cap[eeprom] is now 1 2023-03-30 00:31:07,273 - octoprint.plugins.z_probe_offset - INFO - Printer_cap[eeprom]:1 2023-03-30 00:31:07,282 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting 2023-03-30 00:31:07,296 - octoprint.plugins.ABL_Expert - INFO - self.printer_cap[autolevel] is now 1 2023-03-30 00:31:07,305 - octoprint.plugins.ABL_Expert - INFO - self.printer_cap[z_probe] is now 1 2023-03-30 00:31:07,307 - octoprint.plugins.z_probe_offset - INFO - Printer_cap[z_probe]:1 2023-03-30 00:31:07,310 - octoprint.plugins.ABL_Expert - INFO - self.printer_cap[leveling_data] is now 1 2023-03-30 00:31:07,334 - octoprint.util.comm - INFO - Firmware states that it supports emergency GCODEs to be sent without waiting for an acknowledgement first 2023-03-30 00:31:07,508 - octoprint.plugins.tracking - INFO - Sent tracking event system_unthrottled, payload: {'throttled_now': False, 'throttled_past': False, 'throttled_mask': 0, 'throttled_voltage_now': False, 'throttled_voltage_past': False, 'throttled_overheat_now': False, 'throttled_overheat_past': False} 2023-03-30 00:31:07,814 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance "CR10 Smart Pro 2"._http._tcp.local.' for _http._tcp.local. 2023-03-30 00:31:08,058 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {'firmware_name': '1.0.13', 'printer_port': None, 'printer_baudrate': 0} 2023-03-30 00:31:08,636 - octoprint.util.comm - INFO - Externally triggered heatup detected 2023-03-30 00:31:08,648 - octoprint.plugins.z_probe_offset - INFO - Z probe offset is now -3.82 2023-03-30 00:31:08,672 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance "CR10 Smart Pro 2"._octoprint._tcp.local.' for _octoprint._tcp.local. 2023-03-30 00:31:08,712 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance "CR10 Smart Pro 2" for SSDP 2023-03-30 00:31:08,722 - octoprint.plugins.ABL_Expert - INFO - Grid mesh size is 5 2023-03-30 00:31:08,790 - octoprint.plugins.ABL_Expert - INFO - Grid mesh size is 13 2023-03-30 00:31:08,871 - octoprint.server - INFO - Listening on http://127.0.0.1:5000 2023-03-30 00:31:08,915 - octoprint.plugins.z_probe_offset - INFO - Z probe offset is now -3.82 2023-03-30 00:31:09,638 - octoprint.plugins.announcements - INFO - Loaded channel _important from https://octoprint.org/feeds/important.xml in 0.55s 2023-03-30 00:31:09,842 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from https://plugins.octoprint.org/plugins.json 2023-03-30 00:31:11,075 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2023-03-30 00:31:11,081 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2023-03-30 00:31:11,082 - octoprint.util.pip - INFO - ==> pip ok -> yes 2023-03-30 00:31:11,149 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 23.9GB. That is considered sufficient for updating. 2023-03-30 00:31:11,158 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json 2023-03-30 00:31:11,425 - octoprint.plugins.announcements - INFO - Loaded channel _releases from https://octoprint.org/feeds/releases.xml in 1.3s 2023-03-30 00:31:12,771 - octoprint.plugins.announcements - INFO - Loaded channel _blog from https://octoprint.org/feeds/octoblog.xml in 0.68s 2023-03-30 00:31:13,934 - octoprint.plugins.pluginmanager - INFO - Loaded plugin notices data from https://plugins.octoprint.org/notices.json 2023-03-30 00:31:13,955 - octoprint.plugins.announcements - INFO - Loaded channel _plugins from https://plugins.octoprint.org/feed.xml in 0.59s 2023-03-30 00:31:14,775 - octoprint.plugins.announcements - INFO - Loaded channel _octopi from https://octoprint.org/feeds/octopi.xml in 0.55s 2023-03-30 00:31:14,979 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip 2023-03-30 00:31:14,991 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2023-03-30 00:31:15,006 - octoprint.util.pip - INFO - ==> pip ok -> yes 2023-03-30 00:31:15,197 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk 2023-03-30 00:31:15,246 - octoprint.plugins.HeaterTimeout - INFO - Starting up... 2023-03-30 00:31:15,257 - octoprint.plugins.bedlevelvisualizer - INFO - OctoPrint-BedLevelVisualizer loaded! 2023-03-30 00:31:15,380 - octoprint.plugins.stats - INFO - Printer Stats 2023-03-30 00:31:15,396 - octoprint.plugins.uicustomizer - INFO - UI Customizer is initialized. 2023-03-30 00:31:15,814 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 23, 'printer_state': 'OPERATIONAL'} 2023-03-30 00:31:15,839 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'http://192.168.1.249/', 'path': '/', 'query_string': 'l10n=en'} 2023-03-30 00:31:16,383 - octoprint.plugins.tracking - INFO - Sent tracking event pong, payload: {'version': '1.8.7', 'os': 'linux', 'bits': 32, 'python': '3.9.2', 'pip': '22.3', 'cores': 4, 'freq': 1200.0, 'ram': 912883712, 'pi_model': 'Raspberry Pi 3 Model B Rev 1.2', 'octopi_version': '1.0.0', 'plugins': 'z_probe_offset:0.5,uicustomizer:0.1.9.4,preheat:0.8.0,touchtest:0.4.1,stats:3.1.3,simpleemergencystop:1.0.5,printhistory:1.3,navbartemp:0.15,heatertimeout:0.0.4,firmwareupdater:1.14.0,filamentmanager:1.9.1,displayz:0.2.0,display_eta:2.2.0,calibrationtools:1.0.4,displaylayerprogress:1.28.0,bedlevelvisualizer:1.1.1,abl_expert:0.6'} 2023-03-30 00:31:17,901 - octoprint.plugins.tracking - INFO - Sent tracking event startup, payload: {'version': '1.8.7', 'os': 'linux', 'bits': 32, 'python': '3.9.2', 'pip': '22.3', 'cores': 4, 'freq': 1200.0, 'ram': 912883712, 'pi_model': 'Raspberry Pi 3 Model B Rev 1.2', 'octopi_version': '1.0.0'} 2023-03-30 00:31:18,638 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.33 2023-03-30 00:31:18,950 - octoprint.server.util.flask - INFO - Passively logging in user jdthomas24 from ::ffff:192.168.1.33 2023-03-30 00:31:18,951 - octoprint.access.users - INFO - Logged in user: jdthomas24 2023-03-30 00:31:18,974 - octoprint.plugins.uicustomizer - INFO - Checking for updated themes 2023-03-30 00:31:19,360 - octoprint.server.util.sockjs - INFO - User jdthomas24 logged in on the socket from client ::ffff:192.168.1.33 2023-03-30 00:31:40,192 - octoprint.server.preemptive_cache - INFO - ... done in 24.35s 2023-03-30 00:32:10,810 - octoprint.server.util.flask - INFO - Passively logging in user jdthomas24 from ::ffff:192.168.1.33 2023-03-30 00:32:10,813 - octoprint.access.users - INFO - Logged in user: jdthomas24 2023-03-30 00:32:11,201 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.33 2023-03-30 00:32:13,953 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.33 2023-03-30 00:32:14,143 - octoprint.server.util.flask - INFO - Passively logging in user jdthomas24 from ::ffff:192.168.1.33 2023-03-30 00:32:14,144 - octoprint.access.users - INFO - Logged in user: jdthomas24 2023-03-30 00:32:24,612 - octoprint.server.util.sockjs - INFO - User jdthomas24 logged in on the socket from client ::ffff:192.168.1.33 2023-03-30 00:32:31,543 - octoprint.plugins.tracking - INFO - Sent tracking event webui_load, payload: {'browser_name': 'Silk', 'browser_version': '104.3.37', 'os_name': 'Android', 'os_version': '5.1.1'} 2023-03-30 00:32:41,512 - octoprint.printer.standard.job - INFO - Print job selected - origin: local, path: Fire 8 (2020).gcode, owner: jdthomas24, user: jdthomas24 2023-03-30 00:32:41,561 - octoprint.plugins.DisplayLayerProgress - INFO - File '/home/pi/.octoprint/uploads/Fire 8 (2020).gcode' selected. Determining number of layers. 2023-03-30 00:32:41,572 - octoprint.plugins.DisplayLayerProgress - INFO - Read total height from MetaFile 2023-03-30 00:32:41,746 - octoprint.util.comm - INFO - Starting job on behalf of user jdthomas24 2023-03-30 00:32:41,777 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting" 2023-03-30 00:32:41,790 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: Fire 8 (2020).gcode, owner: jdthomas24, user: jdthomas24 2023-03-30 00:32:42,180 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2023-03-30 00:32:42,193 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Printing" 2023-03-30 00:32:43,537 - octoprint.plugins.DisplayLayerProgress - WARNING - No LayerIndicator found!!! 2023-03-30 00:32:43,548 - octoprint.plugins.DisplayLayerProgress - INFO - File select-event processing done!' 2023-03-30 00:32:43,717 - octoprint.plugins.DisplayLayerProgress - INFO - Printing started. Detailed progress started.{'name': 'Fire 8 (2020).gcode', 'path': 'Fire 8 (2020).gcode', 'origin': 'local', 'size': 4627116, 'owner': 'jdthomas24', 'user': 'jdthomas24'} 2023-03-30 00:32:43,770 - octoprint.plugins.stats - INFO - Printer Stats - on_event 2023-03-30 00:32:44,326 - octoprint.plugins.tracking - INFO - Sent tracking event print_started, payload: {'origin': 'local', 'file': '2be25b706a5d0c9921d8800e85716f0b8623c55a'} 2023-03-30 00:32:44,359 - octoprint.util.comm - INFO - Printer seems to support the busy protocol, will adjust timeouts and set busy interval accordingly 2023-03-30 00:36:23,704 - octoprint.util.comm - INFO - Telling the printer to set the busy interval to our "communicationBusy" timeout - 1s = 2s 2023-03-30 00:40:36,293 - octoprint.server.util.flask - INFO - Passively logging in user jdthomas24 from ::ffff:192.168.1.49 2023-03-30 00:40:36,295 - octoprint.access.users - INFO - Logged in user: jdthomas24 2023-03-30 00:40:36,371 - octoprint.server.util.flask - INFO - Passively logging in user jdthomas24 from ::ffff:192.168.1.49 2023-03-30 00:40:36,372 - octoprint.access.users - INFO - Logged in user: jdthomas24 2023-03-30 00:40:36,444 - octoprint.server.util.flask - INFO - Passively logging in user jdthomas24 from ::ffff:192.168.1.49 2023-03-30 00:40:36,445 - octoprint.access.users - INFO - Logged in user: jdthomas24 2023-03-30 00:40:37,242 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.49 2023-03-30 00:40:37,296 - octoprint.server.util.flask - INFO - Passively logging in user jdthomas24 from ::ffff:192.168.1.49 2023-03-30 00:40:37,299 - octoprint.access.users - INFO - Logged in user: jdthomas24 2023-03-30 00:40:43,066 - octoprint.server.util.sockjs - INFO - User jdthomas24 logged in on the socket from client ::ffff:192.168.1.49 2023-03-30 00:40:50,031 - octoprint.plugins.tracking - INFO - Sent tracking event webui_load, payload: {'browser_name': 'Chrome', 'browser_version': '111.0.0.0', 'os_name': 'Mac OS', 'os_version': '10.15.7'}