2023-05-09 12:25:57,108   /usr/bin/python3 -m pip --disable-pip-version-check install file:///tmp/tmpsjtblmo3/Octolapse-master.zip --no-cache-dir
2023-05-09 12:26:05,615 > Processing /tmp/tmpsjtblmo3/Octolapse-master.zip
2023-05-09 12:26:08,642 > Preparing metadata (setup.py): started
2023-05-09 12:26:26,587 > Preparing metadata (setup.py): finished with status 'done'
2023-05-09 12:26:26,589 > Requirement already satisfied: pillow>=6.2.0<7.0.0 in /usr/lib/python3.10/site-packages (from Octolapse==0.4.2) (9.3.0)
2023-05-09 12:26:26,590 > Requirement already satisfied: sarge in /usr/lib/python3.10/site-packages (from Octolapse==0.4.2) (0.1.6)
2023-05-09 12:26:26,592 > Requirement already satisfied: six in /usr/lib/python3.10/site-packages (from Octolapse==0.4.2) (1.16.0)
2023-05-09 12:26:26,596 > Requirement already satisfied: OctoPrint>1.3.8 in /usr/lib/python3.10/site-packages (from Octolapse==0.4.2) (1.8.7)
2023-05-09 12:26:26,597 > Requirement already satisfied: psutil in /usr/lib/python3.10/site-packages (from Octolapse==0.4.2) (5.9.4)
2023-05-09 12:26:26,598 > Requirement already satisfied: file_read_backwards in /usr/lib/python3.10/site-packages (from Octolapse==0.4.2) (3.0.0)
2023-05-09 12:26:26,601 > Requirement already satisfied: setuptools>=6.0 in /usr/lib/python3.10/site-packages (from Octolapse==0.4.2) (65.6.0)
2023-05-09 12:26:26,602 > Requirement already satisfied: awesome-slugify<1.7,>=1.6.5 in /usr/lib/python3.10/site-packages (from Octolapse==0.4.2) (1.6.5)
2023-05-09 12:26:26,603 > Requirement already satisfied: regex in /usr/lib/python3.10/site-packages (from awesome-slugify<1.7,>=1.6.5->Octolapse==0.4.2) (2022.10.31)
2023-05-09 12:26:26,603 > Requirement already satisfied: Unidecode<0.05,>=0.04.14 in /usr/lib/python3.10/site-packages (from awesome-slugify<1.7,>=1.6.5->Octolapse==0.4.2) (0.4.21)
2023-05-09 12:26:26,604 > Requirement already satisfied: OctoPrint-FileCheck>=2021.2.23 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2021.2.23)
2023-05-09 12:26:26,605 > Requirement already satisfied: OctoPrint-FirmwareCheck>=2021.10.11 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2021.10.11)
2023-05-09 12:26:26,606 > Requirement already satisfied: OctoPrint-PiSupport>=2022.6.13 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2022.6.13)
2023-05-09 12:26:26,607 > Requirement already satisfied: argon2_cffi<22,>=21.3.0 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (21.3.0)
2023-05-09 12:26:26,608 > Requirement already satisfied: cachelib<0.3,>=0.2 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (0.2.0)
2023-05-09 12:26:26,609 > Requirement already satisfied: Click<9,>=8.0.3 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (8.1.3)
2023-05-09 12:26:26,610 > Requirement already satisfied: colorlog<7,>=6 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (6.7.0)
2023-05-09 12:26:26,610 > Requirement already satisfied: emoji<2,>=1.4.2 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.7.0)
2023-05-09 12:26:26,611 > Requirement already satisfied: feedparser<7,>=6.0.8 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (6.0.10)
2023-05-09 12:26:26,611 > Requirement already satisfied: filetype<2,>=1.0.7 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.2.0)
2023-05-09 12:26:26,612 > Requirement already satisfied: Flask-Assets<3,>=2.0 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2.0)
2023-05-09 12:26:26,613 > Requirement already satisfied: Flask-Babel<3,>=2.0 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2.0.0)
2023-05-09 12:26:26,615 > Requirement already satisfied: Flask-Login<0.6,>=0.5 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (0.5.0)
2023-05-09 12:26:26,616 > Requirement already satisfied: Flask-Limiter<3,>=2.6 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2.9.2)
2023-05-09 12:26:26,617 > Requirement already satisfied: flask<2.2,>=2.1 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2.1.3)
2023-05-09 12:26:26,618 > Requirement already satisfied: frozendict<3,>=2.0 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2.3.7)
2023-05-09 12:26:26,619 > Requirement already satisfied: future<1,>=0.18.2 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (0.18.3)
2023-05-09 12:26:26,619 > Requirement already satisfied: markdown<4,>=3.2.2 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (3.4.3)
2023-05-09 12:26:26,620 > Requirement already satisfied: netaddr<0.9,>=0.8 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (0.8.0)
2023-05-09 12:26:26,621 > Requirement already satisfied: netifaces<1,>=0.11 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (0.11.0)
2023-05-09 12:26:26,623 > Requirement already satisfied: passlib<2,>=1.7.4 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.7.4)
2023-05-09 12:26:26,624 > Requirement already satisfied: pathvalidate<3,>=2.4.1 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2.5.2)
2023-05-09 12:26:26,625 > Requirement already satisfied: pkginfo<2,>=1.7.1 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.9.6)
2023-05-09 12:26:26,626 > Requirement already satisfied: pylru<2,>=1.2 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.2.1)
2023-05-09 12:26:26,626 > Requirement already satisfied: pyserial<4,>=3.4 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (3.5)
2023-05-09 12:26:26,627 > Requirement already satisfied: PyYAML<6,>=5.4.1 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (5.4.1)
2023-05-09 12:26:26,628 > Requirement already satisfied: requests<3,>=2.26.0 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2.28.2)
2023-05-09 12:26:26,628 > Requirement already satisfied: semantic_version<3,>=2.8.5 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2.10.0)
2023-05-09 12:26:26,629 > Requirement already satisfied: sentry-sdk<2,>=1.5.7 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.19.1)
2023-05-09 12:26:26,630 > Requirement already satisfied: tornado<7,>=6.0.4 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (6.2)
2023-05-09 12:26:26,631 > Requirement already satisfied: watchdog<2,>=1 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.0.2)
2023-05-09 12:26:26,631 > Requirement already satisfied: websocket-client<2,>=1.2.1 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.5.1)
2023-05-09 12:26:26,632 > Requirement already satisfied: werkzeug<2.1,>=2.0 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2.0.3)
2023-05-09 12:26:26,633 > Requirement already satisfied: wrapt<1.15,>=1.14 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.14.1)
2023-05-09 12:26:26,633 > Requirement already satisfied: zeroconf<0.34,>=0.33 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (0.33.4)
2023-05-09 12:26:26,634 > Requirement already satisfied: zipstream-ng<2.0.0,>=1.3.4 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.5.0)
2023-05-09 12:26:26,635 > Requirement already satisfied: blinker<2,>=1.4 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.6.1)
2023-05-09 12:26:26,637 > Requirement already satisfied: typing-extensions>=4.2 in /usr/lib/python3.10/site-packages (from blinker<2,>=1.4->OctoPrint>1.3.8->Octolapse==0.4.2) (4.5.0)
2023-05-09 12:26:26,638 > Requirement already satisfied: sgmllib3k in /usr/lib/python3.10/site-packages (from feedparser<7,>=6.0.8->OctoPrint>1.3.8->Octolapse==0.4.2) (1.0.0)
2023-05-09 12:26:26,639 > Requirement already satisfied: itsdangerous>=2.0 in /usr/lib/python3.10/site-packages (from flask<2.2,>=2.1->OctoPrint>1.3.8->Octolapse==0.4.2) (2.1.2)
2023-05-09 12:26:26,640 > Requirement already satisfied: Jinja2>=3.0 in /usr/lib/python3.10/site-packages (from flask<2.2,>=2.1->OctoPrint>1.3.8->Octolapse==0.4.2) (3.1.2)
2023-05-09 12:26:26,641 > Requirement already satisfied: webassets>=2.0 in /usr/lib/python3.10/site-packages (from Flask-Assets<3,>=2.0->OctoPrint>1.3.8->Octolapse==0.4.2) (2.0)
2023-05-09 12:26:26,641 > Requirement already satisfied: Babel>=2.3 in /usr/lib/python3.10/site-packages (from Flask-Babel<3,>=2.0->OctoPrint>1.3.8->Octolapse==0.4.2) (2.12.1)
2023-05-09 12:26:26,642 > Requirement already satisfied: pytz in /usr/lib/python3.10/site-packages (from Flask-Babel<3,>=2.0->OctoPrint>1.3.8->Octolapse==0.4.2) (2023.3)
2023-05-09 12:26:26,643 > Requirement already satisfied: limits>=2.8 in /usr/lib/python3.10/site-packages (from Flask-Limiter<3,>=2.6->OctoPrint>1.3.8->Octolapse==0.4.2) (3.3.1)
2023-05-09 12:26:26,643 > Requirement already satisfied: rich<13,>=12 in /usr/lib/python3.10/site-packages (from Flask-Limiter<3,>=2.6->OctoPrint>1.3.8->Octolapse==0.4.2) (12.6.0)
2023-05-09 12:26:26,644 > Requirement already satisfied: ordered-set<5,>4 in /usr/lib/python3.10/site-packages (from Flask-Limiter<3,>=2.6->OctoPrint>1.3.8->Octolapse==0.4.2) (4.1.0)
2023-05-09 12:26:26,645 > Requirement already satisfied: idna<4,>=2.5 in /usr/lib/python3.10/site-packages (from requests<3,>=2.26.0->OctoPrint>1.3.8->Octolapse==0.4.2) (3.4)
2023-05-09 12:26:26,646 > Requirement already satisfied: urllib3<1.27,>=1.21.1 in /usr/lib/python3.10/site-packages (from requests<3,>=2.26.0->OctoPrint>1.3.8->Octolapse==0.4.2) (1.26.15)
2023-05-09 12:26:26,646 > Requirement already satisfied: certifi>=2017.4.17 in /usr/lib/python3.10/site-packages (from requests<3,>=2.26.0->OctoPrint>1.3.8->Octolapse==0.4.2) (2022.12.7)
2023-05-09 12:26:26,647 > Requirement already satisfied: charset-normalizer<4,>=2 in /usr/lib/python3.10/site-packages (from requests<3,>=2.26.0->OctoPrint>1.3.8->Octolapse==0.4.2) (3.1.0)
2023-05-09 12:26:26,648 > Requirement already satisfied: ifaddr>=0.1.7 in /usr/lib/python3.10/site-packages (from zeroconf<0.34,>=0.33->OctoPrint>1.3.8->Octolapse==0.4.2) (0.2.0)
2023-05-09 12:26:26,648 > Requirement already satisfied: MarkupSafe>=2.0 in /usr/lib/python3.10/site-packages (from Jinja2>=3.0->flask<2.2,>=2.1->OctoPrint>1.3.8->Octolapse==0.4.2) (2.1.2)
2023-05-09 12:26:26,649 > Requirement already satisfied: packaging<24,>=21 in /usr/lib/python3.10/site-packages (from limits>=2.8->Flask-Limiter<3,>=2.6->OctoPrint>1.3.8->Octolapse==0.4.2) (23.0)
2023-05-09 12:26:26,651 > Requirement already satisfied: deprecated>=1.2 in /usr/lib/python3.10/site-packages (from limits>=2.8->Flask-Limiter<3,>=2.6->OctoPrint>1.3.8->Octolapse==0.4.2) (1.2.13)
2023-05-09 12:26:26,652 > Requirement already satisfied: importlib-resources>=1.3 in /usr/lib/python3.10/site-packages (from limits>=2.8->Flask-Limiter<3,>=2.6->OctoPrint>1.3.8->Octolapse==0.4.2) (5.12.0)
2023-05-09 12:26:26,652 > Requirement already satisfied: pygments<3.0.0,>=2.6.0 in /usr/lib/python3.10/site-packages (from rich<13,>=12->Flask-Limiter<3,>=2.6->OctoPrint>1.3.8->Octolapse==0.4.2) (2.15.0)
2023-05-09 12:26:26,653 > Requirement already satisfied: commonmark<0.10.0,>=0.9.0 in /usr/lib/python3.10/site-packages (from rich<13,>=12->Flask-Limiter<3,>=2.6->OctoPrint>1.3.8->Octolapse==0.4.2) (0.9.1)
2023-05-09 12:26:27,429 ! DEPRECATION: Octolapse is being installed using the legacy 'setup.py install' method, because it does not have a 'pyproject.toml' and the 'wheel' package is not installed. pip 23.1 will enforce this behaviour change. A possible replacement is to enable the '--use-pep517' option. Discussion can be found at https://github.com/pypa/pip/issues/8559
2023-05-09 12:26:27,935 > Installing collected packages: Octolapse
2023-05-09 12:26:27,936 > Running setup.py install for Octolapse: started
2023-05-09 12:27:19,101 ! error: subprocess-exited-with-error
2023-05-09 12:27:19,102 ! 
2023-05-09 12:27:19,103 ! × Running setup.py install for Octolapse did not run successfully.
2023-05-09 12:27:19,104 ! │ exit code: 1
2023-05-09 12:27:19,105 ! ╰─> [1152 lines of output]
2023-05-09 12:27:19,105 ! likely tags: v0.4.2
2023-05-09 12:27:19,106 ! picking v0.4.2
2023-05-09 12:27:19,107 ! got version from expanded keyword {'version': 'v0.4.2', 'full-revisionid': 'c6c86782cdbfc3590fa4b1bf2e63064eb459b16b', 'dirty': False, 'error': None, 'date': '2023-04-02T10:23:21-0500'}
2023-05-09 12:27:19,107 ! Argon2 passlib backend is not available, not using it for password hashing
2023-05-09 12:27:19,110 ! /tmp/pip-req-build-y4r_xa1j/setup.py:58: DeprecationWarning: distutils Version classes are deprecated. Use packaging.version instead.
2023-05-09 12:27:19,110 ! if LooseVersion(octoprint.server.VERSION) < LooseVersion("1.4"):
2023-05-09 12:27:19,111 ! Found packages: {'octoprint_octolapse.test', 'octoprint_octolapse', 'octoprint_octolapse_setuptools'}
2023-05-09 12:27:19,112 ! running install
2023-05-09 12:27:19,112 ! /usr/lib/python3.10/site-packages/setuptools/command/install.py:34: SetuptoolsDeprecationWarning: setup.py install is deprecated. Use build and pip and other standards-based tools.
2023-05-09 12:27:19,113 ! warnings.warn(
2023-05-09 12:27:19,114 ! running build
2023-05-09 12:27:19,114 ! running build_py
2023-05-09 12:27:19,115 ! creating build
2023-05-09 12:27:19,115 ! creating build/lib.linux-aarch64-cpython-310
2023-05-09 12:27:19,115 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:27:19,115 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 12:27:19,116 ! copying octoprint_octolapse/test/test_settings.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 12:27:19,116 ! copying octoprint_octolapse/test/test_trigger_layer.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 12:27:19,116 ! copying octoprint_octolapse/test/__init__.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 12:27:19,116 ! copying octoprint_octolapse/test/test_extruder.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 12:27:19,116 ! copying octoprint_octolapse/test/test_parsing.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 12:27:19,117 ! copying octoprint_octolapse/test/test_render.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 12:27:19,117 ! copying octoprint_octolapse/test/test_timelapse.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 12:27:19,117 ! copying octoprint_octolapse/test/test_intersection.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 12:27:19,117 ! copying octoprint_octolapse/test/test_trigger_gcode.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 12:27:19,117 ! copying octoprint_octolapse/test/testing_utilities.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 12:27:19,117 ! copying octoprint_octolapse/test/test_octolapseplugin.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 12:27:19,118 ! copying octoprint_octolapse/test/test_position.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 12:27:19,118 ! copying octoprint_octolapse/test/test_trigger_timer.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 12:27:19,118 ! copying octoprint_octolapse/test/test_command.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 12:27:19,118 ! copying octoprint_octolapse/test/test_settings_slicer.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 12:27:19,118 ! copying octoprint_octolapse/test/test_utility.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 12:27:19,118 ! copying octoprint_octolapse/test/test_snapshotGcode.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 12:27:19,118 ! copying octoprint_octolapse/test/test_migration_version.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 12:27:19,119 ! copying octoprint_octolapse/test/test_trigger.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 12:27:19,119 ! copying octoprint_octolapse/snapshot.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:27:19,119 ! copying octoprint_octolapse/log.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:27:19,119 ! copying octoprint_octolapse/__init__.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:27:19,119 ! copying octoprint_octolapse/messenger_worker.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:27:19,119 ! copying octoprint_octolapse/gcode_processor.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:27:19,120 ! copying octoprint_octolapse/gcode_commands.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:27:19,121 ! copying octoprint_octolapse/camera.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:27:19,121 ! copying octoprint_octolapse/position.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:27:19,121 ! copying octoprint_octolapse/stabilization_preprocessing.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:27:19,121 ! copying octoprint_octolapse/utility.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:27:19,121 ! copying octoprint_octolapse/settings_external.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:27:19,121 ! copying octoprint_octolapse/render.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:27:19,121 ! copying octoprint_octolapse/settings_preprocessor.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:27:19,121 ! copying octoprint_octolapse/script.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:27:19,122 ! copying octoprint_octolapse/migration.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:27:19,122 ! copying octoprint_octolapse/_version.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:27:19,122 ! copying octoprint_octolapse/stabilization_gcode.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:27:19,122 ! copying octoprint_octolapse/settings.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:27:19,122 ! copying octoprint_octolapse/error_messages.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:27:19,122 ! copying octoprint_octolapse/trigger.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:27:19,122 ! copying octoprint_octolapse/timelapse.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:27:19,123 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse_setuptools
2023-05-09 12:27:19,123 ! copying octoprint_octolapse_setuptools/__init__.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse_setuptools
2023-05-09 12:27:19,123 ! running egg_info
2023-05-09 12:27:19,123 ! creating Octolapse.egg-info
2023-05-09 12:27:19,123 ! writing Octolapse.egg-info/PKG-INFO
2023-05-09 12:27:19,125 ! writing dependency_links to Octolapse.egg-info/dependency_links.txt
2023-05-09 12:27:19,126 ! writing entry points to Octolapse.egg-info/entry_points.txt
2023-05-09 12:27:19,126 ! writing requirements to Octolapse.egg-info/requires.txt
2023-05-09 12:27:19,126 ! writing top-level names to Octolapse.egg-info/top_level.txt
2023-05-09 12:27:19,127 ! writing manifest file 'Octolapse.egg-info/SOURCES.txt'
2023-05-09 12:27:19,127 ! reading manifest file 'Octolapse.egg-info/SOURCES.txt'
2023-05-09 12:27:19,128 ! reading manifest template 'MANIFEST.in'
2023-05-09 12:27:19,128 ! warning: no files found matching 'README.md'
2023-05-09 12:27:19,128 ! warning: no files found matching '*' under directory 'octoprint_octolapse/translations'
2023-05-09 12:27:19,128 ! warning: no files found matching '*' under directory 'octoprint_octolapse/data/images'
2023-05-09 12:27:19,128 ! adding license file 'LICENSE'
2023-05-09 12:27:19,128 ! writing manifest file 'Octolapse.egg-info/SOURCES.txt'
2023-05-09 12:27:19,129 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data' as data is deprecated, please list it in `packages`.
2023-05-09 12:27:19,130 ! !!
2023-05-09 12:27:19,130 ! 
2023-05-09 12:27:19,130 ! 
2023-05-09 12:27:19,130 ! ############################
2023-05-09 12:27:19,130 ! # Package would be ignored #
2023-05-09 12:27:19,131 ! ############################
2023-05-09 12:27:19,131 ! Python recognizes 'octoprint_octolapse.data' as an importable package,
2023-05-09 12:27:19,131 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 12:27:19,131 ! 
2023-05-09 12:27:19,131 ! 'octoprint_octolapse.data' has been automatically added to the distribution only
2023-05-09 12:27:19,131 ! because it may contain data files, but this behavior is likely to change
2023-05-09 12:27:19,131 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 12:27:19,131 ! 
2023-05-09 12:27:19,132 ! Please make sure that 'octoprint_octolapse.data' is included as a package by using
2023-05-09 12:27:19,132 ! the `packages` configuration field or the proper discovery methods
2023-05-09 12:27:19,132 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 12:27:19,132 ! instead of `find_packages(...)`/`find:`).
2023-05-09 12:27:19,132 ! 
2023-05-09 12:27:19,132 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 12:27:19,132 ! documentation page.
2023-05-09 12:27:19,133 ! 
2023-05-09 12:27:19,133 ! 
2023-05-09 12:27:19,133 ! !!
2023-05-09 12:27:19,133 ! 
2023-05-09 12:27:19,133 ! check.warn(importable)
2023-05-09 12:27:19,133 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.Images' as data is deprecated, please list it in `packages`.
2023-05-09 12:27:19,133 ! !!
2023-05-09 12:27:19,133 ! 
2023-05-09 12:27:19,133 ! 
2023-05-09 12:27:19,134 ! ############################
2023-05-09 12:27:19,134 ! # Package would be ignored #
2023-05-09 12:27:19,134 ! ############################
2023-05-09 12:27:19,134 ! Python recognizes 'octoprint_octolapse.data.Images' as an importable package,
2023-05-09 12:27:19,134 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 12:27:19,134 ! 
2023-05-09 12:27:19,134 ! 'octoprint_octolapse.data.Images' has been automatically added to the distribution only
2023-05-09 12:27:19,134 ! because it may contain data files, but this behavior is likely to change
2023-05-09 12:27:19,135 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 12:27:19,135 ! 
2023-05-09 12:27:19,135 ! Please make sure that 'octoprint_octolapse.data.Images' is included as a package by using
2023-05-09 12:27:19,135 ! the `packages` configuration field or the proper discovery methods
2023-05-09 12:27:19,135 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 12:27:19,135 ! instead of `find_packages(...)`/`find:`).
2023-05-09 12:27:19,135 ! 
2023-05-09 12:27:19,135 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 12:27:19,135 ! documentation page.
2023-05-09 12:27:19,136 ! 
2023-05-09 12:27:19,136 ! 
2023-05-09 12:27:19,136 ! !!
2023-05-09 12:27:19,136 ! 
2023-05-09 12:27:19,136 ! check.warn(importable)
2023-05-09 12:27:19,136 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.fonts.DejaVu' as data is deprecated, please list it in `packages`.
2023-05-09 12:27:19,136 ! !!
2023-05-09 12:27:19,136 ! 
2023-05-09 12:27:19,137 ! 
2023-05-09 12:27:19,137 ! ############################
2023-05-09 12:27:19,137 ! # Package would be ignored #
2023-05-09 12:27:19,137 ! ############################
2023-05-09 12:27:19,137 ! Python recognizes 'octoprint_octolapse.data.fonts.DejaVu' as an importable package,
2023-05-09 12:27:19,137 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 12:27:19,137 ! 
2023-05-09 12:27:19,137 ! 'octoprint_octolapse.data.fonts.DejaVu' has been automatically added to the distribution only
2023-05-09 12:27:19,138 ! because it may contain data files, but this behavior is likely to change
2023-05-09 12:27:19,138 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 12:27:19,138 ! 
2023-05-09 12:27:19,138 ! Please make sure that 'octoprint_octolapse.data.fonts.DejaVu' is included as a package by using
2023-05-09 12:27:19,138 ! the `packages` configuration field or the proper discovery methods
2023-05-09 12:27:19,138 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 12:27:19,138 ! instead of `find_packages(...)`/`find:`).
2023-05-09 12:27:19,138 ! 
2023-05-09 12:27:19,138 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 12:27:19,139 ! documentation page.
2023-05-09 12:27:19,139 ! 
2023-05-09 12:27:19,139 ! 
2023-05-09 12:27:19,139 ! !!
2023-05-09 12:27:19,139 ! 
2023-05-09 12:27:19,139 ! check.warn(importable)
2023-05-09 12:27:19,139 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.lib.c' as data is deprecated, please list it in `packages`.
2023-05-09 12:27:19,139 ! !!
2023-05-09 12:27:19,140 ! 
2023-05-09 12:27:19,140 ! 
2023-05-09 12:27:19,140 ! ############################
2023-05-09 12:27:19,140 ! # Package would be ignored #
2023-05-09 12:27:19,140 ! ############################
2023-05-09 12:27:19,140 ! Python recognizes 'octoprint_octolapse.data.lib.c' as an importable package,
2023-05-09 12:27:19,140 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 12:27:19,140 ! 
2023-05-09 12:27:19,141 ! 'octoprint_octolapse.data.lib.c' has been automatically added to the distribution only
2023-05-09 12:27:19,141 ! because it may contain data files, but this behavior is likely to change
2023-05-09 12:27:19,141 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 12:27:19,141 ! 
2023-05-09 12:27:19,141 ! Please make sure that 'octoprint_octolapse.data.lib.c' is included as a package by using
2023-05-09 12:27:19,141 ! the `packages` configuration field or the proper discovery methods
2023-05-09 12:27:19,141 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 12:27:19,141 ! instead of `find_packages(...)`/`find:`).
2023-05-09 12:27:19,142 ! 
2023-05-09 12:27:19,142 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 12:27:19,142 ! documentation page.
2023-05-09 12:27:19,142 ! 
2023-05-09 12:27:19,142 ! 
2023-05-09 12:27:19,142 ! !!
2023-05-09 12:27:19,142 ! 
2023-05-09 12:27:19,142 ! check.warn(importable)
2023-05-09 12:27:19,143 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.scripts.gcode.cura' as data is deprecated, please list it in `packages`.
2023-05-09 12:27:19,143 ! !!
2023-05-09 12:27:19,143 ! 
2023-05-09 12:27:19,143 ! 
2023-05-09 12:27:19,143 ! ############################
2023-05-09 12:27:19,143 ! # Package would be ignored #
2023-05-09 12:27:19,143 ! ############################
2023-05-09 12:27:19,143 ! Python recognizes 'octoprint_octolapse.data.scripts.gcode.cura' as an importable package,
2023-05-09 12:27:19,143 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 12:27:19,144 ! 
2023-05-09 12:27:19,144 ! 'octoprint_octolapse.data.scripts.gcode.cura' has been automatically added to the distribution only
2023-05-09 12:27:19,144 ! because it may contain data files, but this behavior is likely to change
2023-05-09 12:27:19,144 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 12:27:19,144 ! 
2023-05-09 12:27:19,144 ! Please make sure that 'octoprint_octolapse.data.scripts.gcode.cura' is included as a package by using
2023-05-09 12:27:19,144 ! the `packages` configuration field or the proper discovery methods
2023-05-09 12:27:19,144 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 12:27:19,145 ! instead of `find_packages(...)`/`find:`).
2023-05-09 12:27:19,145 ! 
2023-05-09 12:27:19,145 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 12:27:19,145 ! documentation page.
2023-05-09 12:27:19,145 ! 
2023-05-09 12:27:19,145 ! 
2023-05-09 12:27:19,145 ! !!
2023-05-09 12:27:19,145 ! 
2023-05-09 12:27:19,146 ! check.warn(importable)
2023-05-09 12:27:19,146 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.scripts.linux' as data is deprecated, please list it in `packages`.
2023-05-09 12:27:19,146 ! !!
2023-05-09 12:27:19,146 ! 
2023-05-09 12:27:19,146 ! 
2023-05-09 12:27:19,146 ! ############################
2023-05-09 12:27:19,146 ! # Package would be ignored #
2023-05-09 12:27:19,147 ! ############################
2023-05-09 12:27:19,147 ! Python recognizes 'octoprint_octolapse.data.scripts.linux' as an importable package,
2023-05-09 12:27:19,147 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 12:27:19,147 ! 
2023-05-09 12:27:19,147 ! 'octoprint_octolapse.data.scripts.linux' has been automatically added to the distribution only
2023-05-09 12:27:19,147 ! because it may contain data files, but this behavior is likely to change
2023-05-09 12:27:19,147 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 12:27:19,148 ! 
2023-05-09 12:27:19,148 ! Please make sure that 'octoprint_octolapse.data.scripts.linux' is included as a package by using
2023-05-09 12:27:19,148 ! the `packages` configuration field or the proper discovery methods
2023-05-09 12:27:19,148 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 12:27:19,148 ! instead of `find_packages(...)`/`find:`).
2023-05-09 12:27:19,148 ! 
2023-05-09 12:27:19,148 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 12:27:19,149 ! documentation page.
2023-05-09 12:27:19,149 ! 
2023-05-09 12:27:19,149 ! 
2023-05-09 12:27:19,149 ! !!
2023-05-09 12:27:19,149 ! 
2023-05-09 12:27:19,149 ! check.warn(importable)
2023-05-09 12:27:19,149 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.scripts.windows' as data is deprecated, please list it in `packages`.
2023-05-09 12:27:19,150 ! !!
2023-05-09 12:27:19,150 ! 
2023-05-09 12:27:19,150 ! 
2023-05-09 12:27:19,150 ! ############################
2023-05-09 12:27:19,150 ! # Package would be ignored #
2023-05-09 12:27:19,150 ! ############################
2023-05-09 12:27:19,150 ! Python recognizes 'octoprint_octolapse.data.scripts.windows' as an importable package,
2023-05-09 12:27:19,150 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 12:27:19,151 ! 
2023-05-09 12:27:19,151 ! 'octoprint_octolapse.data.scripts.windows' has been automatically added to the distribution only
2023-05-09 12:27:19,151 ! because it may contain data files, but this behavior is likely to change
2023-05-09 12:27:19,151 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 12:27:19,151 ! 
2023-05-09 12:27:19,151 ! Please make sure that 'octoprint_octolapse.data.scripts.windows' is included as a package by using
2023-05-09 12:27:19,151 ! the `packages` configuration field or the proper discovery methods
2023-05-09 12:27:19,152 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 12:27:19,152 ! instead of `find_packages(...)`/`find:`).
2023-05-09 12:27:19,152 ! 
2023-05-09 12:27:19,152 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 12:27:19,152 ! documentation page.
2023-05-09 12:27:19,152 ! 
2023-05-09 12:27:19,152 ! 
2023-05-09 12:27:19,153 ! !!
2023-05-09 12:27:19,153 ! 
2023-05-09 12:27:19,153 ! check.warn(importable)
2023-05-09 12:27:19,153 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.templates' as data is deprecated, please list it in `packages`.
2023-05-09 12:27:19,153 ! !!
2023-05-09 12:27:19,153 ! 
2023-05-09 12:27:19,153 ! 
2023-05-09 12:27:19,154 ! ############################
2023-05-09 12:27:19,154 ! # Package would be ignored #
2023-05-09 12:27:19,154 ! ############################
2023-05-09 12:27:19,154 ! Python recognizes 'octoprint_octolapse.data.templates' as an importable package,
2023-05-09 12:27:19,154 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 12:27:19,154 ! 
2023-05-09 12:27:19,154 ! 'octoprint_octolapse.data.templates' has been automatically added to the distribution only
2023-05-09 12:27:19,155 ! because it may contain data files, but this behavior is likely to change
2023-05-09 12:27:19,155 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 12:27:19,155 ! 
2023-05-09 12:27:19,155 ! Please make sure that 'octoprint_octolapse.data.templates' is included as a package by using
2023-05-09 12:27:19,155 ! the `packages` configuration field or the proper discovery methods
2023-05-09 12:27:19,155 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 12:27:19,155 ! instead of `find_packages(...)`/`find:`).
2023-05-09 12:27:19,156 ! 
2023-05-09 12:27:19,156 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 12:27:19,156 ! documentation page.
2023-05-09 12:27:19,156 ! 
2023-05-09 12:27:19,156 ! 
2023-05-09 12:27:19,156 ! !!
2023-05-09 12:27:19,156 ! 
2023-05-09 12:27:19,156 ! check.warn(importable)
2023-05-09 12:27:19,157 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.webcam_types' as data is deprecated, please list it in `packages`.
2023-05-09 12:27:19,157 ! !!
2023-05-09 12:27:19,157 ! 
2023-05-09 12:27:19,157 ! 
2023-05-09 12:27:19,157 ! ############################
2023-05-09 12:27:19,157 ! # Package would be ignored #
2023-05-09 12:27:19,157 ! ############################
2023-05-09 12:27:19,158 ! Python recognizes 'octoprint_octolapse.data.webcam_types' as an importable package,
2023-05-09 12:27:19,158 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 12:27:19,158 ! 
2023-05-09 12:27:19,158 ! 'octoprint_octolapse.data.webcam_types' has been automatically added to the distribution only
2023-05-09 12:27:19,158 ! because it may contain data files, but this behavior is likely to change
2023-05-09 12:27:19,158 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 12:27:19,158 ! 
2023-05-09 12:27:19,158 ! Please make sure that 'octoprint_octolapse.data.webcam_types' is included as a package by using
2023-05-09 12:27:19,159 ! the `packages` configuration field or the proper discovery methods
2023-05-09 12:27:19,159 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 12:27:19,159 ! instead of `find_packages(...)`/`find:`).
2023-05-09 12:27:19,159 ! 
2023-05-09 12:27:19,159 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 12:27:19,159 ! documentation page.
2023-05-09 12:27:19,159 ! 
2023-05-09 12:27:19,160 ! 
2023-05-09 12:27:19,160 ! !!
2023-05-09 12:27:19,160 ! 
2023-05-09 12:27:19,160 ! check.warn(importable)
2023-05-09 12:27:19,160 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.webcam_types.mjpg_streamer' as data is deprecated, please list it in `packages`.
2023-05-09 12:27:19,160 ! !!
2023-05-09 12:27:19,160 ! 
2023-05-09 12:27:19,161 ! 
2023-05-09 12:27:19,161 ! ############################
2023-05-09 12:27:19,161 ! # Package would be ignored #
2023-05-09 12:27:19,161 ! ############################
2023-05-09 12:27:19,161 ! Python recognizes 'octoprint_octolapse.data.webcam_types.mjpg_streamer' as an importable package,
2023-05-09 12:27:19,161 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 12:27:19,161 ! 
2023-05-09 12:27:19,161 ! 'octoprint_octolapse.data.webcam_types.mjpg_streamer' has been automatically added to the distribution only
2023-05-09 12:27:19,162 ! because it may contain data files, but this behavior is likely to change
2023-05-09 12:27:19,162 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 12:27:19,162 ! 
2023-05-09 12:27:19,162 ! Please make sure that 'octoprint_octolapse.data.webcam_types.mjpg_streamer' is included as a package by using
2023-05-09 12:27:19,162 ! the `packages` configuration field or the proper discovery methods
2023-05-09 12:27:19,162 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 12:27:19,162 ! instead of `find_packages(...)`/`find:`).
2023-05-09 12:27:19,163 ! 
2023-05-09 12:27:19,163 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 12:27:19,163 ! documentation page.
2023-05-09 12:27:19,163 ! 
2023-05-09 12:27:19,163 ! 
2023-05-09 12:27:19,163 ! !!
2023-05-09 12:27:19,163 ! 
2023-05-09 12:27:19,164 ! check.warn(importable)
2023-05-09 12:27:19,164 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.css' as data is deprecated, please list it in `packages`.
2023-05-09 12:27:19,164 ! !!
2023-05-09 12:27:19,164 ! 
2023-05-09 12:27:19,164 ! 
2023-05-09 12:27:19,164 ! ############################
2023-05-09 12:27:19,164 ! # Package would be ignored #
2023-05-09 12:27:19,165 ! ############################
2023-05-09 12:27:19,165 ! Python recognizes 'octoprint_octolapse.static.css' as an importable package,
2023-05-09 12:27:19,165 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 12:27:19,165 ! 
2023-05-09 12:27:19,165 ! 'octoprint_octolapse.static.css' has been automatically added to the distribution only
2023-05-09 12:27:19,165 ! because it may contain data files, but this behavior is likely to change
2023-05-09 12:27:19,165 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 12:27:19,166 ! 
2023-05-09 12:27:19,166 ! Please make sure that 'octoprint_octolapse.static.css' is included as a package by using
2023-05-09 12:27:19,166 ! the `packages` configuration field or the proper discovery methods
2023-05-09 12:27:19,166 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 12:27:19,166 ! instead of `find_packages(...)`/`find:`).
2023-05-09 12:27:19,166 ! 
2023-05-09 12:27:19,166 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 12:27:19,167 ! documentation page.
2023-05-09 12:27:19,167 ! 
2023-05-09 12:27:19,167 ! 
2023-05-09 12:27:19,167 ! !!
2023-05-09 12:27:19,167 ! 
2023-05-09 12:27:19,167 ! check.warn(importable)
2023-05-09 12:27:19,167 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.docs.help' as data is deprecated, please list it in `packages`.
2023-05-09 12:27:19,168 ! !!
2023-05-09 12:27:19,168 ! 
2023-05-09 12:27:19,168 ! 
2023-05-09 12:27:19,168 ! ############################
2023-05-09 12:27:19,168 ! # Package would be ignored #
2023-05-09 12:27:19,168 ! ############################
2023-05-09 12:27:19,168 ! Python recognizes 'octoprint_octolapse.static.docs.help' as an importable package,
2023-05-09 12:27:19,169 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 12:27:19,169 ! 
2023-05-09 12:27:19,169 ! 'octoprint_octolapse.static.docs.help' has been automatically added to the distribution only
2023-05-09 12:27:19,169 ! because it may contain data files, but this behavior is likely to change
2023-05-09 12:27:19,169 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 12:27:19,169 ! 
2023-05-09 12:27:19,169 ! Please make sure that 'octoprint_octolapse.static.docs.help' is included as a package by using
2023-05-09 12:27:19,170 ! the `packages` configuration field or the proper discovery methods
2023-05-09 12:27:19,170 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 12:27:19,170 ! instead of `find_packages(...)`/`find:`).
2023-05-09 12:27:19,170 ! 
2023-05-09 12:27:19,170 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 12:27:19,170 ! documentation page.
2023-05-09 12:27:19,170 ! 
2023-05-09 12:27:19,170 ! 
2023-05-09 12:27:19,171 ! !!
2023-05-09 12:27:19,171 ! 
2023-05-09 12:27:19,171 ! check.warn(importable)
2023-05-09 12:27:19,171 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.img' as data is deprecated, please list it in `packages`.
2023-05-09 12:27:19,171 ! !!
2023-05-09 12:27:19,171 ! 
2023-05-09 12:27:19,171 ! 
2023-05-09 12:27:19,172 ! ############################
2023-05-09 12:27:19,172 ! # Package would be ignored #
2023-05-09 12:27:19,172 ! ############################
2023-05-09 12:27:19,172 ! Python recognizes 'octoprint_octolapse.static.img' as an importable package,
2023-05-09 12:27:19,172 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 12:27:19,172 ! 
2023-05-09 12:27:19,172 ! 'octoprint_octolapse.static.img' has been automatically added to the distribution only
2023-05-09 12:27:19,173 ! because it may contain data files, but this behavior is likely to change
2023-05-09 12:27:19,173 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 12:27:19,173 ! 
2023-05-09 12:27:19,173 ! Please make sure that 'octoprint_octolapse.static.img' is included as a package by using
2023-05-09 12:27:19,173 ! the `packages` configuration field or the proper discovery methods
2023-05-09 12:27:19,173 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 12:27:19,173 ! instead of `find_packages(...)`/`find:`).
2023-05-09 12:27:19,173 ! 
2023-05-09 12:27:19,174 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 12:27:19,174 ! documentation page.
2023-05-09 12:27:19,174 ! 
2023-05-09 12:27:19,174 ! 
2023-05-09 12:27:19,174 ! !!
2023-05-09 12:27:19,174 ! 
2023-05-09 12:27:19,174 ! check.warn(importable)
2023-05-09 12:27:19,174 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.js' as data is deprecated, please list it in `packages`.
2023-05-09 12:27:19,175 ! !!
2023-05-09 12:27:19,175 ! 
2023-05-09 12:27:19,175 ! 
2023-05-09 12:27:19,175 ! ############################
2023-05-09 12:27:19,175 ! # Package would be ignored #
2023-05-09 12:27:19,175 ! ############################
2023-05-09 12:27:19,175 ! Python recognizes 'octoprint_octolapse.static.js' as an importable package,
2023-05-09 12:27:19,175 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 12:27:19,176 ! 
2023-05-09 12:27:19,176 ! 'octoprint_octolapse.static.js' has been automatically added to the distribution only
2023-05-09 12:27:19,176 ! because it may contain data files, but this behavior is likely to change
2023-05-09 12:27:19,176 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 12:27:19,176 ! 
2023-05-09 12:27:19,176 ! Please make sure that 'octoprint_octolapse.static.js' is included as a package by using
2023-05-09 12:27:19,176 ! the `packages` configuration field or the proper discovery methods
2023-05-09 12:27:19,176 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 12:27:19,177 ! instead of `find_packages(...)`/`find:`).
2023-05-09 12:27:19,177 ! 
2023-05-09 12:27:19,177 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 12:27:19,177 ! documentation page.
2023-05-09 12:27:19,177 ! 
2023-05-09 12:27:19,177 ! 
2023-05-09 12:27:19,177 ! !!
2023-05-09 12:27:19,177 ! 
2023-05-09 12:27:19,178 ! check.warn(importable)
2023-05-09 12:27:19,178 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.js.webcams.mjpg_streamer' as data is deprecated, please list it in `packages`.
2023-05-09 12:27:19,178 ! !!
2023-05-09 12:27:19,178 ! 
2023-05-09 12:27:19,178 ! 
2023-05-09 12:27:19,178 ! ############################
2023-05-09 12:27:19,178 ! # Package would be ignored #
2023-05-09 12:27:19,178 ! ############################
2023-05-09 12:27:19,178 ! Python recognizes 'octoprint_octolapse.static.js.webcams.mjpg_streamer' as an importable package,
2023-05-09 12:27:19,179 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 12:27:19,179 ! 
2023-05-09 12:27:19,179 ! 'octoprint_octolapse.static.js.webcams.mjpg_streamer' has been automatically added to the distribution only
2023-05-09 12:27:19,179 ! because it may contain data files, but this behavior is likely to change
2023-05-09 12:27:19,179 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 12:27:19,179 ! 
2023-05-09 12:27:19,179 ! Please make sure that 'octoprint_octolapse.static.js.webcams.mjpg_streamer' is included as a package by using
2023-05-09 12:27:19,179 ! the `packages` configuration field or the proper discovery methods
2023-05-09 12:27:19,180 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 12:27:19,180 ! instead of `find_packages(...)`/`find:`).
2023-05-09 12:27:19,180 ! 
2023-05-09 12:27:19,180 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 12:27:19,180 ! documentation page.
2023-05-09 12:27:19,180 ! 
2023-05-09 12:27:19,180 ! 
2023-05-09 12:27:19,180 ! !!
2023-05-09 12:27:19,181 ! 
2023-05-09 12:27:19,181 ! check.warn(importable)
2023-05-09 12:27:19,181 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.templates' as data is deprecated, please list it in `packages`.
2023-05-09 12:27:19,181 ! !!
2023-05-09 12:27:19,181 ! 
2023-05-09 12:27:19,181 ! 
2023-05-09 12:27:19,181 ! ############################
2023-05-09 12:27:19,181 ! # Package would be ignored #
2023-05-09 12:27:19,182 ! ############################
2023-05-09 12:27:19,182 ! Python recognizes 'octoprint_octolapse.templates' as an importable package,
2023-05-09 12:27:19,182 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 12:27:19,182 ! 
2023-05-09 12:27:19,182 ! 'octoprint_octolapse.templates' has been automatically added to the distribution only
2023-05-09 12:27:19,182 ! because it may contain data files, but this behavior is likely to change
2023-05-09 12:27:19,182 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 12:27:19,182 ! 
2023-05-09 12:27:19,183 ! Please make sure that 'octoprint_octolapse.templates' is included as a package by using
2023-05-09 12:27:19,183 ! the `packages` configuration field or the proper discovery methods
2023-05-09 12:27:19,183 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 12:27:19,183 ! instead of `find_packages(...)`/`find:`).
2023-05-09 12:27:19,183 ! 
2023-05-09 12:27:19,183 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 12:27:19,183 ! documentation page.
2023-05-09 12:27:19,183 ! 
2023-05-09 12:27:19,184 ! 
2023-05-09 12:27:19,184 ! !!
2023-05-09 12:27:19,184 ! 
2023-05-09 12:27:19,184 ! check.warn(importable)
2023-05-09 12:27:19,184 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.templates.webcams.mjpg_streamer' as data is deprecated, please list it in `packages`.
2023-05-09 12:27:19,184 ! !!
2023-05-09 12:27:19,184 ! 
2023-05-09 12:27:19,185 ! 
2023-05-09 12:27:19,185 ! ############################
2023-05-09 12:27:19,185 ! # Package would be ignored #
2023-05-09 12:27:19,185 ! ############################
2023-05-09 12:27:19,185 ! Python recognizes 'octoprint_octolapse.templates.webcams.mjpg_streamer' as an importable package,
2023-05-09 12:27:19,185 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 12:27:19,185 ! 
2023-05-09 12:27:19,185 ! 'octoprint_octolapse.templates.webcams.mjpg_streamer' has been automatically added to the distribution only
2023-05-09 12:27:19,186 ! because it may contain data files, but this behavior is likely to change
2023-05-09 12:27:19,186 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 12:27:19,186 ! 
2023-05-09 12:27:19,186 ! Please make sure that 'octoprint_octolapse.templates.webcams.mjpg_streamer' is included as a package by using
2023-05-09 12:27:19,186 ! the `packages` configuration field or the proper discovery methods
2023-05-09 12:27:19,186 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 12:27:19,186 ! instead of `find_packages(...)`/`find:`).
2023-05-09 12:27:19,186 ! 
2023-05-09 12:27:19,187 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 12:27:19,187 ! documentation page.
2023-05-09 12:27:19,187 ! 
2023-05-09 12:27:19,187 ! 
2023-05-09 12:27:19,187 ! !!
2023-05-09 12:27:19,187 ! 
2023-05-09 12:27:19,187 ! check.warn(importable)
2023-05-09 12:27:19,188 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 12:27:19,188 ! copying octoprint_octolapse/data/settings_default_0.3.3rc3.dev0.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 12:27:19,188 ! copying octoprint_octolapse/data/settings_default_0.4.0.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 12:27:19,188 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev0.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 12:27:19,188 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev2.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 12:27:19,188 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev3.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 12:27:19,188 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev4.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 12:27:19,189 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev5.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 12:27:19,189 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 12:27:19,189 ! copying octoprint_octolapse/data/settings_default_0.4.0rc2.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 12:27:19,189 ! copying octoprint_octolapse/data/settings_default_0.4.0rc3.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 12:27:19,189 ! copying octoprint_octolapse/data/settings_default_current.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 12:27:19,189 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 12:27:19,189 ! copying octoprint_octolapse/data/Images/no-camera-selected.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 12:27:19,190 ! copying octoprint_octolapse/data/Images/no-image-available.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 12:27:19,190 ! copying octoprint_octolapse/data/Images/no_snapshot.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 12:27:19,190 ! copying octoprint_octolapse/data/Images/test-snapshot-image.jpg -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 12:27:19,190 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/fonts
2023-05-09 12:27:19,190 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/fonts/DejaVu
2023-05-09 12:27:19,190 ! copying octoprint_octolapse/data/fonts/DejaVu/DejaVuSansMono.ttf -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/fonts/DejaVu
2023-05-09 12:27:19,190 ! copying octoprint_octolapse/data/fonts/DejaVu/license.txt -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/fonts/DejaVu
2023-05-09 12:27:19,191 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib
2023-05-09 12:27:19,191 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:27:19,191 ! copying octoprint_octolapse/data/lib/c/extruder.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:27:19,191 ! copying octoprint_octolapse/data/lib/c/extruder.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:27:19,191 ! copying octoprint_octolapse/data/lib/c/gcode_comment_processor.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:27:19,191 ! copying octoprint_octolapse/data/lib/c/gcode_comment_processor.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:27:19,191 ! copying octoprint_octolapse/data/lib/c/gcode_parser.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:27:19,192 ! copying octoprint_octolapse/data/lib/c/gcode_parser.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:27:19,192 ! copying octoprint_octolapse/data/lib/c/gcode_position.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:27:19,192 ! copying octoprint_octolapse/data/lib/c/gcode_position.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:27:19,192 ! copying octoprint_octolapse/data/lib/c/gcode_position_processor.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:27:19,192 ! copying octoprint_octolapse/data/lib/c/gcode_position_processor.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:27:19,192 ! copying octoprint_octolapse/data/lib/c/logging.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:27:19,192 ! copying octoprint_octolapse/data/lib/c/logging.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:27:19,193 ! copying octoprint_octolapse/data/lib/c/parsed_command.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:27:19,193 ! copying octoprint_octolapse/data/lib/c/parsed_command.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:27:19,193 ! copying octoprint_octolapse/data/lib/c/parsed_command_parameter.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:27:19,193 ! copying octoprint_octolapse/data/lib/c/parsed_command_parameter.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:27:19,193 ! copying octoprint_octolapse/data/lib/c/position.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:27:19,193 ! copying octoprint_octolapse/data/lib/c/position.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:27:19,193 ! copying octoprint_octolapse/data/lib/c/python_helpers.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:27:19,194 ! copying octoprint_octolapse/data/lib/c/python_helpers.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:27:19,194 ! copying octoprint_octolapse/data/lib/c/snapshot_plan.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:27:19,194 ! copying octoprint_octolapse/data/lib/c/snapshot_plan.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:27:19,194 ! copying octoprint_octolapse/data/lib/c/snapshot_plan_step.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:27:19,194 ! copying octoprint_octolapse/data/lib/c/snapshot_plan_step.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:27:19,194 ! copying octoprint_octolapse/data/lib/c/stabilization.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:27:19,195 ! copying octoprint_octolapse/data/lib/c/stabilization.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:27:19,195 ! copying octoprint_octolapse/data/lib/c/stabilization_results.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:27:19,195 ! copying octoprint_octolapse/data/lib/c/stabilization_results.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:27:19,195 ! copying octoprint_octolapse/data/lib/c/stabilization_smart_gcode.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:27:19,195 ! copying octoprint_octolapse/data/lib/c/stabilization_smart_gcode.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:27:19,195 ! copying octoprint_octolapse/data/lib/c/stabilization_smart_layer.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:27:19,195 ! copying octoprint_octolapse/data/lib/c/stabilization_smart_layer.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:27:19,196 ! copying octoprint_octolapse/data/lib/c/stabilization_snap_to_print.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:27:19,196 ! copying octoprint_octolapse/data/lib/c/stabilization_snap_to_print.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:27:19,196 ! copying octoprint_octolapse/data/lib/c/trigger_position.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:27:19,196 ! copying octoprint_octolapse/data/lib/c/trigger_position.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:27:19,196 ! copying octoprint_octolapse/data/lib/c/utilities.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:27:19,196 ! copying octoprint_octolapse/data/lib/c/utilities.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:27:19,196 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts
2023-05-09 12:27:19,197 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode
2023-05-09 12:27:19,197 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 12:27:19,197 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 12:27:19,197 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_02_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 12:27:19,197 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_03_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 12:27:19,197 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_04_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 12:27:19,197 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_05_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 12:27:19,198 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_06_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 12:27:19,198 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_07_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 12:27:19,198 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_08_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 12:27:19,198 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 12:27:19,198 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 12:27:19,198 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_02_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 12:27:19,198 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_03_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 12:27:19,199 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_04_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 12:27:19,199 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_05_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 12:27:19,199 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_06_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 12:27:19,199 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_07_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 12:27:19,199 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_08_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 12:27:19,199 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 12:27:19,199 ! copying octoprint_octolapse/data/scripts/linux/capture_image_leave_on_camera.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 12:27:19,200 ! copying octoprint_octolapse/data/scripts/linux/download-from-camera-and-rename.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 12:27:19,200 ! copying octoprint_octolapse/data/scripts/linux/initialize_dslr.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 12:27:19,200 ! copying octoprint_octolapse/data/scripts/linux/move_snapshots_to_target.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 12:27:19,200 ! copying octoprint_octolapse/data/scripts/linux/take_snapshot_and_download.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 12:27:19,200 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/windows
2023-05-09 12:27:19,200 ! copying octoprint_octolapse/data/scripts/windows/take_snapshot_and_download.bat -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/windows
2023-05-09 12:27:19,200 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/templates
2023-05-09 12:27:19,201 ! copying octoprint_octolapse/data/templates/cura_gcode_settings_template.txt -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/templates
2023-05-09 12:27:19,201 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types
2023-05-09 12:27:19,201 ! copying octoprint_octolapse/data/webcam_types/camera_types.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types
2023-05-09 12:27:19,201 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 12:27:19,201 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/logitech_c250.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 12:27:19,201 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/logitech_c920.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 12:27:19,201 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/logitech_c920_2.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 12:27:19,202 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/logitech_c920_3.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 12:27:19,202 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/raspi_cam_v2.1.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 12:27:19,202 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/raspi_cam_v2.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 12:27:19,202 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static
2023-05-09 12:27:19,202 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/css
2023-05-09 12:27:19,202 ! copying octoprint_octolapse/static/css/jquery.minicolors.css -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/css
2023-05-09 12:27:19,202 ! copying octoprint_octolapse/static/css/jquery.minicolors.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/css
2023-05-09 12:27:19,203 ! copying octoprint_octolapse/static/css/octolapse.css -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/css
2023-05-09 12:27:19,203 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs
2023-05-09 12:27:19,203 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,203 ! copying octoprint_octolapse/static/docs/help/dialog.renderings.in_process.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,203 ! copying octoprint_octolapse/static/docs/help/dialog.renderings.unfinished.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,203 ! copying octoprint_octolapse/static/docs/help/dialog.timelapse_files.snapshot_archive.import.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,203 ! copying octoprint_octolapse/static/docs/help/dialog.timelapse_files.snapshot_archive.tab.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,204 ! copying octoprint_octolapse/static/docs/help/dialog.timelapse_files.timelapse.tab.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,204 ! copying octoprint_octolapse/static/docs/help/error_help_error_not_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,204 ! copying octoprint_octolapse/static/docs/help/error_help_init_automatic_slicer_no_settings_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,204 ! copying octoprint_octolapse/static/docs/help/error_help_init_automatic_slicer_settings_missing.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,204 ! copying octoprint_octolapse/static/docs/help/error_help_init_before_print_start_camera_script_apply_failed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,204 ! copying octoprint_octolapse/static/docs/help/error_help_init_camera_init_test_failed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,204 ! copying octoprint_octolapse/static/docs/help/error_help_init_camera_settings_apply_failed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,205 ! copying octoprint_octolapse/static/docs/help/error_help_init_cant_print_from_sd.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,205 ! copying octoprint_octolapse/static/docs/help/error_help_init_directory_test_failed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,205 ! copying octoprint_octolapse/static/docs/help/error_help_init_ffmpeg_not_found_at_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,205 ! copying octoprint_octolapse/static/docs/help/error_help_init_ffmpeg_path_not_set.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,205 ! copying octoprint_octolapse/static/docs/help/error_help_init_ffmpeg_path_retrieve_exception.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,205 ! copying octoprint_octolapse/static/docs/help/error_help_init_incorrect_octoprint_version.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,205 ! copying octoprint_octolapse/static/docs/help/error_help_init_incorrect_print_start_state.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,206 ! copying octoprint_octolapse/static/docs/help/error_help_init_m114_not_supported.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,206 ! copying octoprint_octolapse/static/docs/help/error_help_init_manual_slicer_settings_missing.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,206 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_current_job_data_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,206 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_current_job_file_data_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,206 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_enabled_cameras.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,206 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_gcode_filepath_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,206 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_printer_profile_exists.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,207 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_printer_profile_selected.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,207 ! copying octoprint_octolapse/static/docs/help/error_help_init_octolapse_is_disabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,207 ! copying octoprint_octolapse/static/docs/help/error_help_init_overlay_font_path_not_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,207 ! copying octoprint_octolapse/static/docs/help/error_help_init_printer_not_configured.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,207 ! copying octoprint_octolapse/static/docs/help/error_help_init_rendering_file_template_invalid.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,207 ! copying octoprint_octolapse/static/docs/help/error_help_init_timelapse_start_exception.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,207 ! copying octoprint_octolapse/static/docs/help/error_help_init_too_few_extruders_defined.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,207 ! copying octoprint_octolapse/static/docs/help/error_help_init_too_few_extruders_offsets_defined.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,208 ! copying octoprint_octolapse/static/docs/help/error_help_init_unable_to_accept_snapshot_plan.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,208 ! copying octoprint_octolapse/static/docs/help/error_help_init_unexpected_exception.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,208 ! copying octoprint_octolapse/static/docs/help/error_help_init_unknown_file_origin.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,208 ! copying octoprint_octolapse/static/docs/help/error_help_not_a_valid_error_dict.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,208 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_axis_mode_e_unknown.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,208 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_axis_mode_xyz_unknown.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,208 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_incorrect_trigger_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,209 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_no_definite_position.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,209 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_no_metric_units.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,209 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_no_snapshot_commands_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,209 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_no_snapshot_plans_returned.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,209 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_printer_not_primed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,209 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_unhandled_exception.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,209 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_unknown_trigger_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,209 ! copying octoprint_octolapse/static/docs/help/error_help_rendering_archive_import_no_files_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,210 ! copying octoprint_octolapse/static/docs/help/error_help_rendering_archive_import_zip_file_corrupt.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,210 ! copying octoprint_octolapse/static/docs/help/error_help_rendering_archive_import_zip_file_too_large.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,210 ! copying octoprint_octolapse/static/docs/help/error_help_settings_slicer_simplify3d_duplicate_toolhead_numbers.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,210 ! copying octoprint_octolapse/static/docs/help/error_help_settings_slicer_simplify3d_extruder_count_mismatch.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,210 ! copying octoprint_octolapse/static/docs/help/error_help_settings_slicer_simplify3d_max_extruder_count_exceeded.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,210 ! copying octoprint_octolapse/static/docs/help/error_help_settings_slicer_simplify3d_unexpected_max_toolhead_number.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,210 ! copying octoprint_octolapse/static/docs/help/error_help_timelapse_cannot_aquire_job_lock.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,210 ! copying octoprint_octolapse/static/docs/help/main_settings.auto_reload_frames.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,211 ! copying octoprint_octolapse/static/docs/help/main_settings.auto_reload_latest_snapshot.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,211 ! copying octoprint_octolapse/static/docs/help/main_settings.automatic_update_interval_days.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,211 ! copying octoprint_octolapse/static/docs/help/main_settings.automatic_updates_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,211 ! copying octoprint_octolapse/static/docs/help/main_settings.cancel_print_on_startup_error.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,211 ! copying octoprint_octolapse/static/docs/help/main_settings.enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,211 ! copying octoprint_octolapse/static/docs/help/main_settings.is_test_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,211 ! copying octoprint_octolapse/static/docs/help/main_settings.preview_snapshot_plan_autoclose.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,211 ! copying octoprint_octolapse/static/docs/help/main_settings.preview_snapshot_plan_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,212 ! copying octoprint_octolapse/static/docs/help/main_settings.preview_snapshot_plans.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,212 ! copying octoprint_octolapse/static/docs/help/main_settings.show_extruder_state_changes.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,212 ! copying octoprint_octolapse/static/docs/help/main_settings.show_navbar_icon.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,212 ! copying octoprint_octolapse/static/docs/help/main_settings.show_navbar_when_not_printing.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,212 ! copying octoprint_octolapse/static/docs/help/main_settings.show_position_changes.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,212 ! copying octoprint_octolapse/static/docs/help/main_settings.show_printer_state_changes.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,212 ! copying octoprint_octolapse/static/docs/help/main_settings.show_snapshot_plan_information.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,213 ! copying octoprint_octolapse/static/docs/help/main_settings.show_trigger_state_changes.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,213 ! copying octoprint_octolapse/static/docs/help/main_settings.snapshot_archive_directory.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,213 ! copying octoprint_octolapse/static/docs/help/main_settings.temporary_directory.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,213 ! copying octoprint_octolapse/static/docs/help/main_settings.timelapse_directory.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,213 ! copying octoprint_octolapse/static/docs/help/profiles.camera.apply_settings_at_startup.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,213 ! copying octoprint_octolapse/static/docs/help/profiles.camera.apply_settings_before_print.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,213 ! copying octoprint_octolapse/static/docs/help/profiles.camera.apply_settings_when_disabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,214 ! copying octoprint_octolapse/static/docs/help/profiles.camera.camera_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,214 ! copying octoprint_octolapse/static/docs/help/profiles.camera.delay.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,214 ! copying octoprint_octolapse/static/docs/help/profiles.camera.edit_cutsom_image_preferences.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,214 ! copying octoprint_octolapse/static/docs/help/profiles.camera.external_camera_snapshot_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,214 ! copying octoprint_octolapse/static/docs/help/profiles.camera.gcode_camera_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,214 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_after_render_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,214 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_after_snapshot_gcode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,214 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_after_snapshot_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,215 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_before_render_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,215 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_before_snapshot_gcode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,215 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_before_snapshot_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,215 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_print_end_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,215 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_print_start_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,215 ! copying octoprint_octolapse/static/docs/help/profiles.camera.snapshot_transpose.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,215 ! copying octoprint_octolapse/static/docs/help/profiles.camera.stream_template.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,216 ! copying octoprint_octolapse/static/docs/help/profiles.camera.timeout_ms.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,216 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.address.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,216 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.enable_custom_image_preferences.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,216 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.ignore_ssl_error.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,216 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.1.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,216 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029518.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,216 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029519.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,217 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029538.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,217 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029670.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,217 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029671.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,217 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029675.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,217 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094849.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,217 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094850.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,217 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094851.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,217 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094856.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,218 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094857.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,218 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094858.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,218 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094860.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,218 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094861.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,218 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094867.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,218 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094868.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,218 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094870.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,219 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094871.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,219 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094872.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,219 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094873.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,219 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094874.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,219 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10291459.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,219 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963776.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,219 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963777.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,219 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963778.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,220 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963788.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,220 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963790.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,220 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963791.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,220 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963795.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,220 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963796.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,220 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963797.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,220 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963800.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,221 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963802.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,221 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963803.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,221 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963804.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,221 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963807.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,221 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963810.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,221 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963818.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,221 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.password.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,222 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.snapshot_request_template.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,222 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.stream_download.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,222 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.username.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,222 ! copying octoprint_octolapse/static/docs/help/profiles.library.is_custom.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,222 ! copying octoprint_octolapse/static/docs/help/profiles.logging.enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,222 ! copying octoprint_octolapse/static/docs/help/profiles.logging.log_all_errors.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,222 ! copying octoprint_octolapse/static/docs/help/profiles.logging.log_to_console.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,223 ! copying octoprint_octolapse/static/docs/help/profiles.logging.logging_level.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,223 ! copying octoprint_octolapse/static/docs/help/profiles.logging.manage_log_files.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,223 ! copying octoprint_octolapse/static/docs/help/profiles.logging.modules_to_log.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,223 ! copying octoprint_octolapse/static/docs/help/profiles.printer.auto_detect_position.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,223 ! copying octoprint_octolapse/static/docs/help/profiles.printer.auto_position_detection_commands.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,223 ! copying octoprint_octolapse/static/docs/help/profiles.printer.automatic_configuration.is_automatic.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,223 ! copying octoprint_octolapse/static/docs/help/profiles.printer.automatic_configuration.make.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,224 ! copying octoprint_octolapse/static/docs/help/profiles.printer.automatic_configuration.model.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,224 ! copying octoprint_octolapse/static/docs/help/profiles.printer.bed_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,224 ! copying octoprint_octolapse/static/docs/help/profiles.printer.custom_bounding_box.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,224 ! copying octoprint_octolapse/static/docs/help/profiles.printer.default_extruder.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,224 ! copying octoprint_octolapse/static/docs/help/profiles.printer.default_firmware_retractions.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,224 ! copying octoprint_octolapse/static/docs/help/profiles.printer.default_firmware_retractions_zhop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,224 ! copying octoprint_octolapse/static/docs/help/profiles.printer.e_axis_default_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,225 ! copying octoprint_octolapse/static/docs/help/profiles.printer.extruder_offsets.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,225 ! copying octoprint_octolapse/static/docs/help/profiles.printer.g90_influences_extruder.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,225 ! copying octoprint_octolapse/static/docs/help/profiles.printer.gocde_axis_compatibility_mode_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,225 ! copying octoprint_octolapse/static/docs/help/profiles.printer.home_axis_gcode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,225 ! copying octoprint_octolapse/static/docs/help/profiles.printer.invert_e.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,225 ! copying octoprint_octolapse/static/docs/help/profiles.printer.invert_x.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,225 ! copying octoprint_octolapse/static/docs/help/profiles.printer.invert_y.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,226 ! copying octoprint_octolapse/static/docs/help/profiles.printer.invert_z.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,226 ! copying octoprint_octolapse/static/docs/help/profiles.printer.minimum_layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,226 ! copying octoprint_octolapse/static/docs/help/profiles.printer.num_extruders.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,226 ! copying octoprint_octolapse/static/docs/help/profiles.printer.origin_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,226 ! copying octoprint_octolapse/static/docs/help/profiles.printer.override_octoprint_profile_settings.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,226 ! copying octoprint_octolapse/static/docs/help/profiles.printer.priming_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,226 ! copying octoprint_octolapse/static/docs/help/profiles.printer.restrict_snapshot_area.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,227 ! copying octoprint_octolapse/static/docs/help/profiles.printer.shared_extruder.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,227 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicer_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,227 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.automatic.continue_on_failure.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,227 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.automatic.disable_automatic_save.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,227 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.4_2.speed_z_hop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,227 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,228 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.max_feedrate_z_override.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,228 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_amount.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,228 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_enable.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,228 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_hop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,228 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_hop_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,228 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_prime_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,228 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_retract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,229 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.smooth_spiralized_contours.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,229 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.speed_travel.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,229 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.axis_speed_display_unit_options.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,229 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.deretract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,229 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,229 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.retract_before_move.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,229 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.retract_length.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,230 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.retract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,230 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.travel_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,230 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.vase_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,230 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.z_hop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,230 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.z_travel_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,230 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.extruder_use_retract.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,230 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,231 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.retraction_distance.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,231 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.retraction_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,231 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.retraction_vertical_lift.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,231 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.vase_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,231 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.x_y_axis_movement_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,231 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.z_axis_movement_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,232 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.deretract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,232 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,232 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.retract_length.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,232 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.retract_lift.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,232 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.retract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,232 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.travel_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,232 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.vase_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,233 ! copying octoprint_octolapse/static/docs/help/profiles.printer.snapshot_command.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,233 ! copying octoprint_octolapse/static/docs/help/profiles.printer.suppress_snapshot_command_always.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,233 ! copying octoprint_octolapse/static/docs/help/profiles.printer.units_default.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,233 ! copying octoprint_octolapse/static/docs/help/profiles.printer.xyz_axes_default_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,233 ! copying octoprint_octolapse/static/docs/help/profiles.printer.zero_based_extruder.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,233 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.archive_snapshots.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,234 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.bitrate.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,234 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.constant_rate_factor.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,234 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.enable_watermark.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,234 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,234 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.fps.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,234 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.fps_calculation_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,234 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.max_fps.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,235 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.min_fps.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,235 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.output_format.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,235 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.output_template.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,235 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_font_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,235 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_font_size.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,235 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_outline_color.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,235 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_outline_width.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,236 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_preview.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,236 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_alignment.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,236 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_color.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,236 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_halign.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,236 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_pos_xy.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,236 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_template.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,236 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_template_current_time.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,237 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_template_time_elapsed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,237 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_valign.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,237 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.post_roll_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,237 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.pre_roll_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,237 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.run_length_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,237 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.thread_count.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,237 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.wait_for_moves_to_finish.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,238 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_fixed_coordinate.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,238 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_fixed_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,238 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_fixed_path_invert_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,238 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_fixed_path_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,238 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_relative.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,238 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_relative_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,238 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_relative_path_invert_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,239 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_relative_path_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,239 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,239 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_fixed_coordinate.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,239 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_fixed_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,239 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_fixed_path_invert_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,239 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_fixed_path_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,239 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_relative.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,240 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_relative_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,240 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_relative_path_invert_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,240 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_relative_path_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,240 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,240 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.calculate_intersections.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,240 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.extruder_state_requirements_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,240 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.layer_trigger_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,241 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.position_restriction_shape.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,241 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.position_restriction_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,241 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.position_restrictions_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,241 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.require_zhop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,241 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.smart_layer_disable_z_lift.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,241 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.smart_layer_snap_to_print_high_quality.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,241 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.smart_layer_snap_to_print_smooth.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,241 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.smart_layer_trigger_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,242 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.timer_trigger_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,242 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.trigger_subtype.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,242 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.trigger_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,242 ! copying octoprint_octolapse/static/docs/help/quality_issues_fast_trigger.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,242 ! copying octoprint_octolapse/static/docs/help/quality_issues_low_quality_snap_to_print.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,242 ! copying octoprint_octolapse/static/docs/help/quality_issues_no_print_features_detected.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,242 ! copying octoprint_octolapse/static/docs/help/settings.import.import_method.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,243 ! copying octoprint_octolapse/static/docs/help/settings.import.import_text.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,243 ! copying octoprint_octolapse/static/docs/help/snapshot_plan_missed_snapshots.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:27:19,243 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/img
2023-05-09 12:27:19,243 ! copying octoprint_octolapse/static/img/watermark.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/img
2023-05-09 12:27:19,243 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:27:19,243 ! copying octoprint_octolapse/static/js/jquery.minicolors.min.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:27:19,243 ! copying octoprint_octolapse/static/js/jquery.validate.min.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:27:19,243 ! copying octoprint_octolapse/static/js/octolapse.dialog.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:27:19,244 ! copying octoprint_octolapse/static/js/octolapse.dialog.renderings.in_process.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:27:19,244 ! copying octoprint_octolapse/static/js/octolapse.dialog.renderings.unfinished.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:27:19,244 ! copying octoprint_octolapse/static/js/octolapse.dialog.timelapse_files.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:27:19,244 ! copying octoprint_octolapse/static/js/octolapse.file_browser.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:27:19,244 ! copying octoprint_octolapse/static/js/octolapse.help.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:27:19,244 ! copying octoprint_octolapse/static/js/octolapse.helpers.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:27:19,244 ! copying octoprint_octolapse/static/js/octolapse.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:27:19,244 ! copying octoprint_octolapse/static/js/octolapse.profiles.camera.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:27:19,245 ! copying octoprint_octolapse/static/js/octolapse.profiles.camera.webcam.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:27:19,245 ! copying octoprint_octolapse/static/js/octolapse.profiles.camera.webcam.mjpg_streamer.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:27:19,245 ! copying octoprint_octolapse/static/js/octolapse.profiles.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:27:19,245 ! copying octoprint_octolapse/static/js/octolapse.profiles.library.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:27:19,245 ! copying octoprint_octolapse/static/js/octolapse.profiles.logging.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:27:19,245 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:27:19,245 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.slicer.cura.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:27:19,245 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.slicer.other.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:27:19,246 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.slicer.simplify_3d.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:27:19,246 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.slicer.slic3r_pe.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:27:19,246 ! copying octoprint_octolapse/static/js/octolapse.profiles.rendering.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:27:19,246 ! copying octoprint_octolapse/static/js/octolapse.profiles.stabilization.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:27:19,246 ! copying octoprint_octolapse/static/js/octolapse.profiles.trigger.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:27:19,246 ! copying octoprint_octolapse/static/js/octolapse.settings.import.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:27:19,246 ! copying octoprint_octolapse/static/js/octolapse.settings.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:27:19,246 ! copying octoprint_octolapse/static/js/octolapse.settings.main.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:27:19,247 ! copying octoprint_octolapse/static/js/octolapse.status.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:27:19,247 ! copying octoprint_octolapse/static/js/octolapse.status.snapshotplan.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:27:19,247 ! copying octoprint_octolapse/static/js/octolapse.status.snapshotplan_preview.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:27:19,247 ! copying octoprint_octolapse/static/js/showdown.min.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:27:19,247 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js/webcams
2023-05-09 12:27:19,247 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js/webcams/mjpg_streamer
2023-05-09 12:27:19,247 ! copying octoprint_octolapse/static/js/webcams/mjpg_streamer/raspi_cam_v2.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js/webcams/mjpg_streamer
2023-05-09 12:27:19,248 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:27:19,248 ! copying octoprint_octolapse/templates/octolapse_dialog.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:27:19,248 ! copying octoprint_octolapse/templates/octolapse_dialog_rendering_in_process.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:27:19,248 ! copying octoprint_octolapse/templates/octolapse_dialog_rendering_unfinished.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:27:19,248 ! copying octoprint_octolapse/templates/octolapse_dialog_timelapse_files.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:27:19,248 ! copying octoprint_octolapse/templates/octolapse_file_browser.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:27:19,248 ! copying octoprint_octolapse/templates/octolapse_helpers.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:27:19,248 ! copying octoprint_octolapse/templates/octolapse_navbar.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:27:19,249 ! copying octoprint_octolapse/templates/octolapse_profile_dialog_add_edit.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:27:19,249 ! copying octoprint_octolapse/templates/octolapse_profiles.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:27:19,249 ! copying octoprint_octolapse/templates/octolapse_profiles_camera.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:27:19,249 ! copying octoprint_octolapse/templates/octolapse_profiles_camera_webcam.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:27:19,249 ! copying octoprint_octolapse/templates/octolapse_profiles_camera_webcam_mjpg_streamer.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:27:19,249 ! copying octoprint_octolapse/templates/octolapse_profiles_library.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:27:19,249 ! copying octoprint_octolapse/templates/octolapse_profiles_logging.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:27:19,250 ! copying octoprint_octolapse/templates/octolapse_profiles_printer.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:27:19,250 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_automatic.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:27:19,250 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_automatic.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:27:19,250 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_cura.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:27:19,250 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_cura_4.2.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:27:19,250 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_other.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:27:19,250 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_simplify3d.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:27:19,250 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_slic3r_pe.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:27:19,251 ! copying octoprint_octolapse/templates/octolapse_profiles_rendering.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:27:19,251 ! copying octoprint_octolapse/templates/octolapse_profiles_stabilization.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:27:19,251 ! copying octoprint_octolapse/templates/octolapse_profiles_trigger.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:27:19,251 ! copying octoprint_octolapse/templates/octolapse_settings.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:27:19,251 ! copying octoprint_octolapse/templates/octolapse_settings_import.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:27:19,251 ! copying octoprint_octolapse/templates/octolapse_settings_main.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:27:19,251 ! copying octoprint_octolapse/templates/octolapse_snapshot_plan.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:27:19,252 ! copying octoprint_octolapse/templates/octolapse_status_extruder.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:27:19,252 ! copying octoprint_octolapse/templates/octolapse_status_position.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:27:19,252 ! copying octoprint_octolapse/templates/octolapse_status_printer_state.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:27:19,252 ! copying octoprint_octolapse/templates/octolapse_status_snapshot_plan.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:27:19,252 ! copying octoprint_octolapse/templates/octolapse_status_triggers.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:27:19,252 ! copying octoprint_octolapse/templates/octolapse_tab.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:27:19,252 ! copying octoprint_octolapse/templates/octolapse_tab_latest_snapshot.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:27:19,253 ! copying octoprint_octolapse/templates/octolapse_tab_settings_current.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:27:19,253 ! copying octoprint_octolapse/templates/octolapse_tab_settings_current_cameras.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:27:19,253 ! copying octoprint_octolapse/templates/octolapse_tab_snapshot_plan_preview_popup.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:27:19,253 ! copying octoprint_octolapse/templates/octolapse_tab_webcam_settings_popup.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:27:19,253 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams
2023-05-09 12:27:19,253 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams/mjpg_streamer
2023-05-09 12:27:19,253 ! copying octoprint_octolapse/templates/webcams/mjpg_streamer/logitech_c250.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams/mjpg_streamer
2023-05-09 12:27:19,254 ! copying octoprint_octolapse/templates/webcams/mjpg_streamer/logitech_c920.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams/mjpg_streamer
2023-05-09 12:27:19,254 ! copying octoprint_octolapse/templates/webcams/mjpg_streamer/raspi_cam_v2.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams/mjpg_streamer
2023-05-09 12:27:19,254 ! UPDATING build/lib.linux-aarch64-cpython-310/octoprint_octolapse/_version.py
2023-05-09 12:27:19,254 ! set build/lib.linux-aarch64-cpython-310/octoprint_octolapse/_version.py to 'v0.4.2'
2023-05-09 12:27:19,254 ! running build_ext
2023-05-09 12:27:19,254 ! Compiling Octolapse Parser Extension with <distutils.unixccompiler.UnixCCompiler object at 0x77b9bab400>.
2023-05-09 12:27:19,254 ! building 'GcodePositionProcessor' extension
2023-05-09 12:27:19,255 ! creating build/temp.linux-aarch64-cpython-310
2023-05-09 12:27:19,255 ! creating build/temp.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:27:19,255 ! creating build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 12:27:19,255 ! creating build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib
2023-05-09 12:27:19,255 ! creating build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:27:19,255 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/extruder.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/extruder.o -O3 -std=c++11
2023-05-09 12:27:19,255 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/gcode_comment_processor.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/gcode_comment_processor.o -O3 -std=c++11
2023-05-09 12:27:19,256 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.cpp: In member function 'void gcode_comment_processor::update_feature_from_section(position&) const':
2023-05-09 12:27:19,256 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.cpp:99:16: warning: enumeration value 'section_type_no_section' not handled in switch [-Wswitch]
2023-05-09 12:27:19,256 ! 99 |         switch (current_section_)
2023-05-09 12:27:19,256 ! |                ^
2023-05-09 12:27:19,256 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/gcode_parser.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/gcode_parser.o -O3 -std=c++11
2023-05-09 12:27:19,256 ! octoprint_octolapse/data/lib/c/gcode_parser.cpp: In member function 'bool gcode_parser::try_parse_gcode(const char*, parsed_command&)':
2023-05-09 12:27:19,256 ! octoprint_octolapse/data/lib/c/gcode_parser.cpp:148:47: warning: suggest parentheses around '&&' within '||' [-Wparentheses]
2023-05-09 12:27:19,257 ! 148 |     else if (cur_char > 32 || cur_char == ' ' && has_seen_character)
2023-05-09 12:27:19,257 ! |                               ~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:27:19,257 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/gcode_position.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/gcode_position.o -O3 -std=c++11
2023-05-09 12:27:19,257 ! octoprint_octolapse/data/lib/c/gcode_position.cpp: In member function 'void gcode_position::add_position(position&)':
2023-05-09 12:27:19,257 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:395:12: warning: operation on '((gcode_position*)this)->gcode_position::cur_pos_' may be undefined [-Wsequence-point]
2023-05-09 12:27:19,257 ! 395 |   cur_pos_ = (++cur_pos_) % NUM_POSITIONS;
2023-05-09 12:27:19,257 ! octoprint_octolapse/data/lib/c/gcode_position.cpp: In member function 'void gcode_position::add_position(parsed_command&)':
2023-05-09 12:27:19,257 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:402:12: warning: operation on '((gcode_position*)this)->gcode_position::cur_pos_' may be undefined [-Wsequence-point]
2023-05-09 12:27:19,258 ! 402 |   cur_pos_ = (++cur_pos_) % NUM_POSITIONS;
2023-05-09 12:27:19,258 ! octoprint_octolapse/data/lib/c/gcode_position.cpp: In member function 'void gcode_position::update(parsed_command&, long int, long int, long int)':
2023-05-09 12:27:19,258 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:659:31: warning: comparison of integer expressions of different signedness: 'const unsigned int' and 'int' [-Wsign-compare]
2023-05-09 12:27:19,258 ! 659 |                 if (increment > p_current_pos->height_increment && increment > 1)
2023-05-09 12:27:19,258 ! |                     ~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:27:19,258 ! octoprint_octolapse/data/lib/c/gcode_position.cpp: In member function 'void gcode_position::process_g10(position*, parsed_command&)':
2023-05-09 12:27:19,258 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:952:10: warning: variable 's' set but not used [-Wunused-but-set-variable]
2023-05-09 12:27:19,259 ! 952 |   double s = 0;
2023-05-09 12:27:19,259 ! |          ^
2023-05-09 12:27:19,259 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:953:8: warning: variable 'has_s' set but not used [-Wunused-but-set-variable]
2023-05-09 12:27:19,259 ! 953 |   bool has_s = false;
2023-05-09 12:27:19,259 ! |        ^~~~~
2023-05-09 12:27:19,259 ! In file included from octoprint_octolapse/data/lib/c/gcode_position.h:29,
2023-05-09 12:27:19,259 ! from octoprint_octolapse/data/lib/c/gcode_position.cpp:22:
2023-05-09 12:27:19,259 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h: At global scope:
2023-05-09 12:27:19,260 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:77:20: warning: 'SLICER_PE_SKIRT_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 12:27:19,260 ! 77 | static const char* SLICER_PE_SKIRT_COMMENTS[] = {"skirt", "move to first skirt point", NULL};
2023-05-09 12:27:19,260 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:27:19,260 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:73:20: warning: 'SLICER_PE_BRIDGE_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 12:27:19,260 ! 73 | static const char* SLICER_PE_BRIDGE_COMMENTS[] = {
2023-05-09 12:27:19,260 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:27:19,260 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:72:20: warning: 'SLICER_PE_GAP_FILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 12:27:19,261 ! 72 | static const char* SLICER_PE_GAP_FILL_COMMENTS[] = {"gap fill", "move to first gap fill point", NULL};
2023-05-09 12:27:19,261 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:27:19,261 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:69:20: warning: 'SLICER_PE_SOLID_INFILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 12:27:19,261 ! 69 | static const char* SLICER_PE_SOLID_INFILL_COMMENTS[] = {
2023-05-09 12:27:19,261 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:27:19,261 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:68:20: warning: 'SLICER_PE_INFILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 12:27:19,261 ! 68 | static const char* SLICER_PE_INFILL_COMMENTS[] = {"infill", "move to first infill point", NULL};
2023-05-09 12:27:19,262 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:27:19,262 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:67:20: warning: 'SLICER_PE_UNKNOWN_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 12:27:19,262 ! 67 | static const char* SLICER_PE_UNKNOWN_PERIMETER_COMMENTS[] = {"perimeter", "move to first perimeter point", NULL};
2023-05-09 12:27:19,262 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:27:19,262 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:64:20: warning: 'SLICER_PE_INNER_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 12:27:19,262 ! 64 | static const char* SLICER_PE_INNER_PERIMETER_COMMENTS[] = {
2023-05-09 12:27:19,262 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:27:19,263 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:61:20: warning: 'SLICER_PE_OUTER_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 12:27:19,263 ! 61 | static const char* SLICER_PE_OUTER_PERIMETER_COMMENTS[] = {
2023-05-09 12:27:19,263 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:27:19,263 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/gcode_position_processor.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/gcode_position_processor.o -O3 -std=c++11
2023-05-09 12:27:19,263 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:915: warning: ignoring '#pragma region location_detection_commands' [-Wunknown-pragmas]
2023-05-09 12:27:19,263 ! 915 | #pragma region location_detection_commands
2023-05-09 12:27:19,263 ! |
2023-05-09 12:27:19,264 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:955: warning: ignoring '#pragma endregion Parse' [-Wunknown-pragmas]
2023-05-09 12:27:19,264 ! 955 | #pragma endregion Parse the list of location detection commands
2023-05-09 12:27:19,264 ! |
2023-05-09 12:27:19,264 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1122: warning: ignoring '#pragma region Extract' [-Wunknown-pragmas]
2023-05-09 12:27:19,264 ! 1122 | #pragma region Extract extruder objects
2023-05-09 12:27:19,264 ! |
2023-05-09 12:27:19,264 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1219: warning: ignoring '#pragma endregion Parse' [-Wunknown-pragmas]
2023-05-09 12:27:19,265 ! 1219 | #pragma endregion Parse extruder objects
2023-05-09 12:27:19,265 ! |
2023-05-09 12:27:19,265 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1221: warning: ignoring '#pragma region Extract' [-Wunknown-pragmas]
2023-05-09 12:27:19,265 ! 1221 | #pragma region Extract firmware extruder offsets from the printer settings
2023-05-09 12:27:19,265 ! |
2023-05-09 12:27:19,265 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1334: warning: ignoring '#pragma endregion Extract' [-Wunknown-pragmas]
2023-05-09 12:27:19,265 ! 1334 | #pragma endregion Extract firmware extruder offsets from the printer settings
2023-05-09 12:27:19,266 ! |
2023-05-09 12:27:19,266 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp: In function 'int main(int, char**)':
2023-05-09 12:27:19,266 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:56:27: warning: 'void PyEval_InitThreads()' is deprecated [-Wdeprecated-declarations]
2023-05-09 12:27:19,266 ! 56 |         PyEval_InitThreads();
2023-05-09 12:27:19,266 ! |         ~~~~~~~~~~~~~~~~~~^~
2023-05-09 12:27:19,266 ! In file included from /usr/include/python3.10/Python.h:130,
2023-05-09 12:27:19,266 ! from octoprint_octolapse/data/lib/c/gcode_position_processor.h:30,
2023-05-09 12:27:19,267 ! from octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:23:
2023-05-09 12:27:19,267 ! /usr/include/python3.10/ceval.h:122:37: note: declared here
2023-05-09 12:27:19,267 ! 122 | Py_DEPRECATED(3.9) PyAPI_FUNC(void) PyEval_InitThreads(void);
2023-05-09 12:27:19,267 ! |                                     ^~~~~~~~~~~~~~~~~~
2023-05-09 12:27:19,267 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp: In function 'PyObject* Initialize(PyObject*, PyObject*)':
2023-05-09 12:27:19,267 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:371:19: warning: unused variable 'p_gcode_position' [-Wunused-variable]
2023-05-09 12:27:19,267 ! 371 |   gcode_position* p_gcode_position = NULL;
2023-05-09 12:27:19,268 ! |                   ^~~~~~~~~~~~~~~~
2023-05-09 12:27:19,268 ! In file included from /usr/include/c++/12.2.1/bits/cxxabi_init_exception.h:38,
2023-05-09 12:27:19,268 ! from /usr/include/c++/12.2.1/bits/exception_ptr.h:38,
2023-05-09 12:27:19,268 ! from /usr/include/c++/12.2.1/exception:168,
2023-05-09 12:27:19,268 ! from /usr/include/c++/12.2.1/stdexcept:38,
2023-05-09 12:27:19,268 ! from /usr/include/c++/12.2.1/system_error:41,
2023-05-09 12:27:19,269 ! from /usr/include/c++/12.2.1/bits/ios_base.h:46,
2023-05-09 12:27:19,269 ! from /usr/include/c++/12.2.1/iomanip:40,
2023-05-09 12:27:19,269 ! from octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:24:
2023-05-09 12:27:19,269 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp: In function 'bool ParseStabilizationArgs(PyObject*, stabilization_args*, PyObject**, PyObject**)':
2023-05-09 12:27:19,269 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1406:12: error: converting to 'bool' from 'std::nullptr_t' requires direct-initialization [-fpermissive]
2023-05-09 12:27:19,269 ! 1406 |     return NULL;
2023-05-09 12:27:19,269 ! |            ^~~~
2023-05-09 12:27:19,270 ! In file included from octoprint_octolapse/data/lib/c/gcode_position_processor.h:37:
2023-05-09 12:27:19,270 ! octoprint_octolapse/data/lib/c/stabilization_smart_gcode.h: At global scope:
2023-05-09 12:27:19,270 ! octoprint_octolapse/data/lib/c/stabilization_smart_gcode.h:5:20: warning: 'SMART_GCODE_STABILIZATION' defined but not used [-Wunused-variable]
2023-05-09 12:27:19,270 ! 5 | static const char* SMART_GCODE_STABILIZATION = "smart_gcode";
2023-05-09 12:27:19,270 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:27:19,270 ! In file included from octoprint_octolapse/data/lib/c/gcode_position_processor.h:36:
2023-05-09 12:27:19,270 ! octoprint_octolapse/data/lib/c/stabilization_smart_layer.h:11:20: warning: 'SMART_LAYER_STABILIZATION' defined but not used [-Wunused-variable]
2023-05-09 12:27:19,271 ! 11 | static const char* SMART_LAYER_STABILIZATION = "smart_layer";
2023-05-09 12:27:19,271 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:27:19,271 ! In file included from octoprint_octolapse/data/lib/c/gcode_position_processor.h:35:
2023-05-09 12:27:19,271 ! octoprint_octolapse/data/lib/c/stabilization.h:44:20: warning: 'send_parsed_command_never' defined but not used [-Wunused-variable]
2023-05-09 12:27:19,271 ! 44 | static const char* send_parsed_command_never = "never";
2023-05-09 12:27:19,271 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:27:19,271 ! octoprint_octolapse/data/lib/c/stabilization.h:43:20: warning: 'send_parsed_command_last' defined but not used [-Wunused-variable]
2023-05-09 12:27:19,272 ! 43 | static const char* send_parsed_command_last = "last";
2023-05-09 12:27:19,272 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:27:19,272 ! octoprint_octolapse/data/lib/c/stabilization.h:42:20: warning: 'send_parsed_command_first' defined but not used [-Wunused-variable]
2023-05-09 12:27:19,272 ! 42 | static const char* send_parsed_command_first = "first";
2023-05-09 12:27:19,272 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:27:19,272 ! octoprint_octolapse/data/lib/c/stabilization.h:41:20: warning: 'snapshot_action' defined but not used [-Wunused-variable]
2023-05-09 12:27:19,273 ! 41 | static const char* snapshot_action = "snapshot";
2023-05-09 12:27:19,273 ! |                    ^~~~~~~~~~~~~~~
2023-05-09 12:27:19,273 ! octoprint_octolapse/data/lib/c/stabilization.h:40:20: warning: 'travel_action' defined but not used [-Wunused-variable]
2023-05-09 12:27:19,273 ! 40 | static const char* travel_action = "travel";
2023-05-09 12:27:19,273 ! |                    ^~~~~~~~~~~~~
2023-05-09 12:27:19,273 ! In file included from octoprint_octolapse/data/lib/c/gcode_position.h:29,
2023-05-09 12:27:19,273 ! from octoprint_octolapse/data/lib/c/gcode_position_processor.h:33:
2023-05-09 12:27:19,274 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:77:20: warning: 'SLICER_PE_SKIRT_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 12:27:19,274 ! 77 | static const char* SLICER_PE_SKIRT_COMMENTS[] = {"skirt", "move to first skirt point", NULL};
2023-05-09 12:27:19,274 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:27:19,274 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:73:20: warning: 'SLICER_PE_BRIDGE_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 12:27:19,274 ! 73 | static const char* SLICER_PE_BRIDGE_COMMENTS[] = {
2023-05-09 12:27:19,274 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:27:19,274 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:72:20: warning: 'SLICER_PE_GAP_FILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 12:27:19,274 ! 72 | static const char* SLICER_PE_GAP_FILL_COMMENTS[] = {"gap fill", "move to first gap fill point", NULL};
2023-05-09 12:27:19,275 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:27:19,275 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:69:20: warning: 'SLICER_PE_SOLID_INFILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 12:27:19,275 ! 69 | static const char* SLICER_PE_SOLID_INFILL_COMMENTS[] = {
2023-05-09 12:27:19,275 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:27:19,275 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:68:20: warning: 'SLICER_PE_INFILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 12:27:19,275 ! 68 | static const char* SLICER_PE_INFILL_COMMENTS[] = {"infill", "move to first infill point", NULL};
2023-05-09 12:27:19,275 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:27:19,276 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:67:20: warning: 'SLICER_PE_UNKNOWN_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 12:27:19,276 ! 67 | static const char* SLICER_PE_UNKNOWN_PERIMETER_COMMENTS[] = {"perimeter", "move to first perimeter point", NULL};
2023-05-09 12:27:19,276 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:27:19,276 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:64:20: warning: 'SLICER_PE_INNER_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 12:27:19,276 ! 64 | static const char* SLICER_PE_INNER_PERIMETER_COMMENTS[] = {
2023-05-09 12:27:19,276 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:27:19,276 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:61:20: warning: 'SLICER_PE_OUTER_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 12:27:19,276 ! 61 | static const char* SLICER_PE_OUTER_PERIMETER_COMMENTS[] = {
2023-05-09 12:27:19,277 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:27:19,277 ! error: command '/usr/bin/gcc' failed with exit code 1
2023-05-09 12:27:19,277 ! [end of output]
2023-05-09 12:27:19,277 ! 
2023-05-09 12:27:19,277 ! note: This error originates from a subprocess, and is likely not a problem with pip.
2023-05-09 12:27:19,277 ! error: legacy-install-failure
2023-05-09 12:27:19,277 ! 
2023-05-09 12:27:19,277 ! × Encountered error while trying to install package.
2023-05-09 12:27:19,278 ! ╰─> Octolapse
2023-05-09 12:27:19,278 ! 
2023-05-09 12:27:19,278 ! note: This is an issue with the package mentioned above, not pip.
2023-05-09 12:27:19,278 ! hint: See above for output from the failure.
2023-05-09 12:27:19,781 > Running setup.py install for Octolapse: finished with status 'error'
2023-05-09 12:27:20,802 * Looks like the plugin was already installed. Forcing a reinstall.
2023-05-09 12:27:20,817   /usr/bin/python3 -m pip --disable-pip-version-check install file:///tmp/tmpsjtblmo3/Octolapse-master.zip --no-cache-dir --ignore-installed --force-reinstall --no-deps
2023-05-09 12:27:27,906 > Processing /tmp/tmpsjtblmo3/Octolapse-master.zip
2023-05-09 12:27:30,921 > Preparing metadata (setup.py): started
2023-05-09 12:27:44,841 ! DEPRECATION: Octolapse is being installed using the legacy 'setup.py install' method, because it does not have a 'pyproject.toml' and the 'wheel' package is not installed. pip 23.1 will enforce this behaviour change. A possible replacement is to enable the '--use-pep517' option. Discussion can be found at https://github.com/pypa/pip/issues/8559
2023-05-09 12:27:45,347 > Preparing metadata (setup.py): finished with status 'done'
2023-05-09 12:27:45,349 > Installing collected packages: Octolapse
2023-05-09 12:27:45,349 > Running setup.py install for Octolapse: started
2023-05-09 12:28:35,661 > Running setup.py install for Octolapse: finished with status 'error'
2023-05-09 12:28:36,285 ! error: subprocess-exited-with-error
2023-05-09 12:28:36,285 ! 
2023-05-09 12:28:36,286 ! × Running setup.py install for Octolapse did not run successfully.
2023-05-09 12:28:36,287 ! │ exit code: 1
2023-05-09 12:28:36,288 ! ╰─> [1152 lines of output]
2023-05-09 12:28:36,288 ! likely tags: v0.4.2
2023-05-09 12:28:36,288 ! picking v0.4.2
2023-05-09 12:28:36,288 ! got version from expanded keyword {'version': 'v0.4.2', 'full-revisionid': 'c6c86782cdbfc3590fa4b1bf2e63064eb459b16b', 'dirty': False, 'error': None, 'date': '2023-04-02T10:23:21-0500'}
2023-05-09 12:28:36,289 ! Argon2 passlib backend is not available, not using it for password hashing
2023-05-09 12:28:36,289 ! /tmp/pip-req-build-mnvslp0c/setup.py:58: DeprecationWarning: distutils Version classes are deprecated. Use packaging.version instead.
2023-05-09 12:28:36,289 ! if LooseVersion(octoprint.server.VERSION) < LooseVersion("1.4"):
2023-05-09 12:28:36,289 ! Found packages: {'octoprint_octolapse.test', 'octoprint_octolapse', 'octoprint_octolapse_setuptools'}
2023-05-09 12:28:36,289 ! running install
2023-05-09 12:28:36,290 ! /usr/lib/python3.10/site-packages/setuptools/command/install.py:34: SetuptoolsDeprecationWarning: setup.py install is deprecated. Use build and pip and other standards-based tools.
2023-05-09 12:28:36,290 ! warnings.warn(
2023-05-09 12:28:36,290 ! running build
2023-05-09 12:28:36,290 ! running build_py
2023-05-09 12:28:36,290 ! creating build
2023-05-09 12:28:36,291 ! creating build/lib.linux-aarch64-cpython-310
2023-05-09 12:28:36,291 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:28:36,291 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 12:28:36,291 ! copying octoprint_octolapse/test/test_settings.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 12:28:36,291 ! copying octoprint_octolapse/test/test_trigger_layer.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 12:28:36,292 ! copying octoprint_octolapse/test/__init__.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 12:28:36,292 ! copying octoprint_octolapse/test/test_extruder.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 12:28:36,292 ! copying octoprint_octolapse/test/test_parsing.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 12:28:36,292 ! copying octoprint_octolapse/test/test_render.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 12:28:36,292 ! copying octoprint_octolapse/test/test_timelapse.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 12:28:36,293 ! copying octoprint_octolapse/test/test_intersection.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 12:28:36,293 ! copying octoprint_octolapse/test/test_trigger_gcode.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 12:28:36,293 ! copying octoprint_octolapse/test/testing_utilities.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 12:28:36,293 ! copying octoprint_octolapse/test/test_octolapseplugin.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 12:28:36,293 ! copying octoprint_octolapse/test/test_position.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 12:28:36,294 ! copying octoprint_octolapse/test/test_trigger_timer.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 12:28:36,294 ! copying octoprint_octolapse/test/test_command.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 12:28:36,294 ! copying octoprint_octolapse/test/test_settings_slicer.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 12:28:36,294 ! copying octoprint_octolapse/test/test_utility.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 12:28:36,294 ! copying octoprint_octolapse/test/test_snapshotGcode.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 12:28:36,294 ! copying octoprint_octolapse/test/test_migration_version.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 12:28:36,295 ! copying octoprint_octolapse/test/test_trigger.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 12:28:36,295 ! copying octoprint_octolapse/snapshot.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:28:36,295 ! copying octoprint_octolapse/log.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:28:36,295 ! copying octoprint_octolapse/__init__.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:28:36,295 ! copying octoprint_octolapse/messenger_worker.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:28:36,295 ! copying octoprint_octolapse/gcode_processor.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:28:36,295 ! copying octoprint_octolapse/gcode_commands.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:28:36,296 ! copying octoprint_octolapse/camera.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:28:36,296 ! copying octoprint_octolapse/position.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:28:36,296 ! copying octoprint_octolapse/stabilization_preprocessing.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:28:36,296 ! copying octoprint_octolapse/utility.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:28:36,296 ! copying octoprint_octolapse/settings_external.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:28:36,297 ! copying octoprint_octolapse/render.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:28:36,297 ! copying octoprint_octolapse/settings_preprocessor.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:28:36,297 ! copying octoprint_octolapse/script.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:28:36,297 ! copying octoprint_octolapse/migration.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:28:36,297 ! copying octoprint_octolapse/_version.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:28:36,297 ! copying octoprint_octolapse/stabilization_gcode.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:28:36,298 ! copying octoprint_octolapse/settings.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:28:36,298 ! copying octoprint_octolapse/error_messages.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:28:36,298 ! copying octoprint_octolapse/trigger.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:28:36,298 ! copying octoprint_octolapse/timelapse.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:28:36,298 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse_setuptools
2023-05-09 12:28:36,298 ! copying octoprint_octolapse_setuptools/__init__.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse_setuptools
2023-05-09 12:28:36,298 ! running egg_info
2023-05-09 12:28:36,299 ! creating Octolapse.egg-info
2023-05-09 12:28:36,299 ! writing Octolapse.egg-info/PKG-INFO
2023-05-09 12:28:36,300 ! writing dependency_links to Octolapse.egg-info/dependency_links.txt
2023-05-09 12:28:36,300 ! writing entry points to Octolapse.egg-info/entry_points.txt
2023-05-09 12:28:36,300 ! writing requirements to Octolapse.egg-info/requires.txt
2023-05-09 12:28:36,300 ! writing top-level names to Octolapse.egg-info/top_level.txt
2023-05-09 12:28:36,301 ! writing manifest file 'Octolapse.egg-info/SOURCES.txt'
2023-05-09 12:28:36,301 ! reading manifest file 'Octolapse.egg-info/SOURCES.txt'
2023-05-09 12:28:36,301 ! reading manifest template 'MANIFEST.in'
2023-05-09 12:28:36,301 ! warning: no files found matching 'README.md'
2023-05-09 12:28:36,301 ! warning: no files found matching '*' under directory 'octoprint_octolapse/translations'
2023-05-09 12:28:36,301 ! warning: no files found matching '*' under directory 'octoprint_octolapse/data/images'
2023-05-09 12:28:36,301 ! adding license file 'LICENSE'
2023-05-09 12:28:36,302 ! writing manifest file 'Octolapse.egg-info/SOURCES.txt'
2023-05-09 12:28:36,302 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data' as data is deprecated, please list it in `packages`.
2023-05-09 12:28:36,302 ! !!
2023-05-09 12:28:36,302 ! 
2023-05-09 12:28:36,302 ! 
2023-05-09 12:28:36,302 ! ############################
2023-05-09 12:28:36,303 ! # Package would be ignored #
2023-05-09 12:28:36,303 ! ############################
2023-05-09 12:28:36,303 ! Python recognizes 'octoprint_octolapse.data' as an importable package,
2023-05-09 12:28:36,305 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 12:28:36,306 ! 
2023-05-09 12:28:36,306 ! 'octoprint_octolapse.data' has been automatically added to the distribution only
2023-05-09 12:28:36,306 ! because it may contain data files, but this behavior is likely to change
2023-05-09 12:28:36,306 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 12:28:36,307 ! 
2023-05-09 12:28:36,307 ! Please make sure that 'octoprint_octolapse.data' is included as a package by using
2023-05-09 12:28:36,307 ! the `packages` configuration field or the proper discovery methods
2023-05-09 12:28:36,308 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 12:28:36,308 ! instead of `find_packages(...)`/`find:`).
2023-05-09 12:28:36,308 ! 
2023-05-09 12:28:36,308 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 12:28:36,308 ! documentation page.
2023-05-09 12:28:36,309 ! 
2023-05-09 12:28:36,309 ! 
2023-05-09 12:28:36,309 ! !!
2023-05-09 12:28:36,309 ! 
2023-05-09 12:28:36,309 ! check.warn(importable)
2023-05-09 12:28:36,309 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.Images' as data is deprecated, please list it in `packages`.
2023-05-09 12:28:36,309 ! !!
2023-05-09 12:28:36,310 ! 
2023-05-09 12:28:36,310 ! 
2023-05-09 12:28:36,310 ! ############################
2023-05-09 12:28:36,310 ! # Package would be ignored #
2023-05-09 12:28:36,310 ! ############################
2023-05-09 12:28:36,310 ! Python recognizes 'octoprint_octolapse.data.Images' as an importable package,
2023-05-09 12:28:36,310 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 12:28:36,310 ! 
2023-05-09 12:28:36,311 ! 'octoprint_octolapse.data.Images' has been automatically added to the distribution only
2023-05-09 12:28:36,311 ! because it may contain data files, but this behavior is likely to change
2023-05-09 12:28:36,311 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 12:28:36,311 ! 
2023-05-09 12:28:36,311 ! Please make sure that 'octoprint_octolapse.data.Images' is included as a package by using
2023-05-09 12:28:36,311 ! the `packages` configuration field or the proper discovery methods
2023-05-09 12:28:36,311 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 12:28:36,311 ! instead of `find_packages(...)`/`find:`).
2023-05-09 12:28:36,312 ! 
2023-05-09 12:28:36,312 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 12:28:36,312 ! documentation page.
2023-05-09 12:28:36,312 ! 
2023-05-09 12:28:36,312 ! 
2023-05-09 12:28:36,312 ! !!
2023-05-09 12:28:36,312 ! 
2023-05-09 12:28:36,312 ! check.warn(importable)
2023-05-09 12:28:36,313 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.fonts.DejaVu' as data is deprecated, please list it in `packages`.
2023-05-09 12:28:36,313 ! !!
2023-05-09 12:28:36,313 ! 
2023-05-09 12:28:36,313 ! 
2023-05-09 12:28:36,313 ! ############################
2023-05-09 12:28:36,313 ! # Package would be ignored #
2023-05-09 12:28:36,313 ! ############################
2023-05-09 12:28:36,313 ! Python recognizes 'octoprint_octolapse.data.fonts.DejaVu' as an importable package,
2023-05-09 12:28:36,314 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 12:28:36,314 ! 
2023-05-09 12:28:36,314 ! 'octoprint_octolapse.data.fonts.DejaVu' has been automatically added to the distribution only
2023-05-09 12:28:36,314 ! because it may contain data files, but this behavior is likely to change
2023-05-09 12:28:36,314 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 12:28:36,314 ! 
2023-05-09 12:28:36,314 ! Please make sure that 'octoprint_octolapse.data.fonts.DejaVu' is included as a package by using
2023-05-09 12:28:36,314 ! the `packages` configuration field or the proper discovery methods
2023-05-09 12:28:36,315 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 12:28:36,315 ! instead of `find_packages(...)`/`find:`).
2023-05-09 12:28:36,315 ! 
2023-05-09 12:28:36,315 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 12:28:36,315 ! documentation page.
2023-05-09 12:28:36,315 ! 
2023-05-09 12:28:36,315 ! 
2023-05-09 12:28:36,315 ! !!
2023-05-09 12:28:36,316 ! 
2023-05-09 12:28:36,316 ! check.warn(importable)
2023-05-09 12:28:36,316 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.lib.c' as data is deprecated, please list it in `packages`.
2023-05-09 12:28:36,316 ! !!
2023-05-09 12:28:36,316 ! 
2023-05-09 12:28:36,316 ! 
2023-05-09 12:28:36,316 ! ############################
2023-05-09 12:28:36,317 ! # Package would be ignored #
2023-05-09 12:28:36,317 ! ############################
2023-05-09 12:28:36,317 ! Python recognizes 'octoprint_octolapse.data.lib.c' as an importable package,
2023-05-09 12:28:36,317 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 12:28:36,317 ! 
2023-05-09 12:28:36,317 ! 'octoprint_octolapse.data.lib.c' has been automatically added to the distribution only
2023-05-09 12:28:36,317 ! because it may contain data files, but this behavior is likely to change
2023-05-09 12:28:36,318 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 12:28:36,318 ! 
2023-05-09 12:28:36,318 ! Please make sure that 'octoprint_octolapse.data.lib.c' is included as a package by using
2023-05-09 12:28:36,318 ! the `packages` configuration field or the proper discovery methods
2023-05-09 12:28:36,318 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 12:28:36,318 ! instead of `find_packages(...)`/`find:`).
2023-05-09 12:28:36,318 ! 
2023-05-09 12:28:36,318 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 12:28:36,319 ! documentation page.
2023-05-09 12:28:36,319 ! 
2023-05-09 12:28:36,319 ! 
2023-05-09 12:28:36,319 ! !!
2023-05-09 12:28:36,319 ! 
2023-05-09 12:28:36,319 ! check.warn(importable)
2023-05-09 12:28:36,319 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.scripts.gcode.cura' as data is deprecated, please list it in `packages`.
2023-05-09 12:28:36,319 ! !!
2023-05-09 12:28:36,320 ! 
2023-05-09 12:28:36,320 ! 
2023-05-09 12:28:36,320 ! ############################
2023-05-09 12:28:36,320 ! # Package would be ignored #
2023-05-09 12:28:36,320 ! ############################
2023-05-09 12:28:36,320 ! Python recognizes 'octoprint_octolapse.data.scripts.gcode.cura' as an importable package,
2023-05-09 12:28:36,320 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 12:28:36,321 ! 
2023-05-09 12:28:36,321 ! 'octoprint_octolapse.data.scripts.gcode.cura' has been automatically added to the distribution only
2023-05-09 12:28:36,321 ! because it may contain data files, but this behavior is likely to change
2023-05-09 12:28:36,321 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 12:28:36,321 ! 
2023-05-09 12:28:36,321 ! Please make sure that 'octoprint_octolapse.data.scripts.gcode.cura' is included as a package by using
2023-05-09 12:28:36,321 ! the `packages` configuration field or the proper discovery methods
2023-05-09 12:28:36,322 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 12:28:36,322 ! instead of `find_packages(...)`/`find:`).
2023-05-09 12:28:36,322 ! 
2023-05-09 12:28:36,322 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 12:28:36,322 ! documentation page.
2023-05-09 12:28:36,322 ! 
2023-05-09 12:28:36,322 ! 
2023-05-09 12:28:36,322 ! !!
2023-05-09 12:28:36,323 ! 
2023-05-09 12:28:36,323 ! check.warn(importable)
2023-05-09 12:28:36,323 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.scripts.linux' as data is deprecated, please list it in `packages`.
2023-05-09 12:28:36,323 ! !!
2023-05-09 12:28:36,323 ! 
2023-05-09 12:28:36,323 ! 
2023-05-09 12:28:36,323 ! ############################
2023-05-09 12:28:36,323 ! # Package would be ignored #
2023-05-09 12:28:36,324 ! ############################
2023-05-09 12:28:36,324 ! Python recognizes 'octoprint_octolapse.data.scripts.linux' as an importable package,
2023-05-09 12:28:36,324 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 12:28:36,324 ! 
2023-05-09 12:28:36,324 ! 'octoprint_octolapse.data.scripts.linux' has been automatically added to the distribution only
2023-05-09 12:28:36,324 ! because it may contain data files, but this behavior is likely to change
2023-05-09 12:28:36,324 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 12:28:36,325 ! 
2023-05-09 12:28:36,325 ! Please make sure that 'octoprint_octolapse.data.scripts.linux' is included as a package by using
2023-05-09 12:28:36,325 ! the `packages` configuration field or the proper discovery methods
2023-05-09 12:28:36,325 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 12:28:36,325 ! instead of `find_packages(...)`/`find:`).
2023-05-09 12:28:36,325 ! 
2023-05-09 12:28:36,325 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 12:28:36,326 ! documentation page.
2023-05-09 12:28:36,326 ! 
2023-05-09 12:28:36,326 ! 
2023-05-09 12:28:36,326 ! !!
2023-05-09 12:28:36,326 ! 
2023-05-09 12:28:36,326 ! check.warn(importable)
2023-05-09 12:28:36,326 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.scripts.windows' as data is deprecated, please list it in `packages`.
2023-05-09 12:28:36,326 ! !!
2023-05-09 12:28:36,327 ! 
2023-05-09 12:28:36,327 ! 
2023-05-09 12:28:36,327 ! ############################
2023-05-09 12:28:36,327 ! # Package would be ignored #
2023-05-09 12:28:36,327 ! ############################
2023-05-09 12:28:36,327 ! Python recognizes 'octoprint_octolapse.data.scripts.windows' as an importable package,
2023-05-09 12:28:36,327 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 12:28:36,327 ! 
2023-05-09 12:28:36,328 ! 'octoprint_octolapse.data.scripts.windows' has been automatically added to the distribution only
2023-05-09 12:28:36,328 ! because it may contain data files, but this behavior is likely to change
2023-05-09 12:28:36,328 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 12:28:36,328 ! 
2023-05-09 12:28:36,328 ! Please make sure that 'octoprint_octolapse.data.scripts.windows' is included as a package by using
2023-05-09 12:28:36,328 ! the `packages` configuration field or the proper discovery methods
2023-05-09 12:28:36,328 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 12:28:36,329 ! instead of `find_packages(...)`/`find:`).
2023-05-09 12:28:36,329 ! 
2023-05-09 12:28:36,329 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 12:28:36,329 ! documentation page.
2023-05-09 12:28:36,329 ! 
2023-05-09 12:28:36,329 ! 
2023-05-09 12:28:36,329 ! !!
2023-05-09 12:28:36,329 ! 
2023-05-09 12:28:36,330 ! check.warn(importable)
2023-05-09 12:28:36,330 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.templates' as data is deprecated, please list it in `packages`.
2023-05-09 12:28:36,330 ! !!
2023-05-09 12:28:36,330 ! 
2023-05-09 12:28:36,330 ! 
2023-05-09 12:28:36,330 ! ############################
2023-05-09 12:28:36,330 ! # Package would be ignored #
2023-05-09 12:28:36,331 ! ############################
2023-05-09 12:28:36,331 ! Python recognizes 'octoprint_octolapse.data.templates' as an importable package,
2023-05-09 12:28:36,331 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 12:28:36,331 ! 
2023-05-09 12:28:36,331 ! 'octoprint_octolapse.data.templates' has been automatically added to the distribution only
2023-05-09 12:28:36,331 ! because it may contain data files, but this behavior is likely to change
2023-05-09 12:28:36,331 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 12:28:36,332 ! 
2023-05-09 12:28:36,332 ! Please make sure that 'octoprint_octolapse.data.templates' is included as a package by using
2023-05-09 12:28:36,332 ! the `packages` configuration field or the proper discovery methods
2023-05-09 12:28:36,332 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 12:28:36,332 ! instead of `find_packages(...)`/`find:`).
2023-05-09 12:28:36,332 ! 
2023-05-09 12:28:36,332 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 12:28:36,333 ! documentation page.
2023-05-09 12:28:36,333 ! 
2023-05-09 12:28:36,333 ! 
2023-05-09 12:28:36,333 ! !!
2023-05-09 12:28:36,333 ! 
2023-05-09 12:28:36,333 ! check.warn(importable)
2023-05-09 12:28:36,333 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.webcam_types' as data is deprecated, please list it in `packages`.
2023-05-09 12:28:36,333 ! !!
2023-05-09 12:28:36,334 ! 
2023-05-09 12:28:36,334 ! 
2023-05-09 12:28:36,334 ! ############################
2023-05-09 12:28:36,334 ! # Package would be ignored #
2023-05-09 12:28:36,334 ! ############################
2023-05-09 12:28:36,334 ! Python recognizes 'octoprint_octolapse.data.webcam_types' as an importable package,
2023-05-09 12:28:36,335 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 12:28:36,335 ! 
2023-05-09 12:28:36,335 ! 'octoprint_octolapse.data.webcam_types' has been automatically added to the distribution only
2023-05-09 12:28:36,335 ! because it may contain data files, but this behavior is likely to change
2023-05-09 12:28:36,335 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 12:28:36,335 ! 
2023-05-09 12:28:36,335 ! Please make sure that 'octoprint_octolapse.data.webcam_types' is included as a package by using
2023-05-09 12:28:36,335 ! the `packages` configuration field or the proper discovery methods
2023-05-09 12:28:36,336 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 12:28:36,336 ! instead of `find_packages(...)`/`find:`).
2023-05-09 12:28:36,336 ! 
2023-05-09 12:28:36,336 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 12:28:36,336 ! documentation page.
2023-05-09 12:28:36,336 ! 
2023-05-09 12:28:36,337 ! 
2023-05-09 12:28:36,337 ! !!
2023-05-09 12:28:36,337 ! 
2023-05-09 12:28:36,337 ! check.warn(importable)
2023-05-09 12:28:36,337 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.webcam_types.mjpg_streamer' as data is deprecated, please list it in `packages`.
2023-05-09 12:28:36,337 ! !!
2023-05-09 12:28:36,337 ! 
2023-05-09 12:28:36,338 ! 
2023-05-09 12:28:36,338 ! ############################
2023-05-09 12:28:36,338 ! # Package would be ignored #
2023-05-09 12:28:36,338 ! ############################
2023-05-09 12:28:36,338 ! Python recognizes 'octoprint_octolapse.data.webcam_types.mjpg_streamer' as an importable package,
2023-05-09 12:28:36,338 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 12:28:36,338 ! 
2023-05-09 12:28:36,339 ! 'octoprint_octolapse.data.webcam_types.mjpg_streamer' has been automatically added to the distribution only
2023-05-09 12:28:36,339 ! because it may contain data files, but this behavior is likely to change
2023-05-09 12:28:36,339 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 12:28:36,339 ! 
2023-05-09 12:28:36,339 ! Please make sure that 'octoprint_octolapse.data.webcam_types.mjpg_streamer' is included as a package by using
2023-05-09 12:28:36,339 ! the `packages` configuration field or the proper discovery methods
2023-05-09 12:28:36,339 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 12:28:36,340 ! instead of `find_packages(...)`/`find:`).
2023-05-09 12:28:36,340 ! 
2023-05-09 12:28:36,340 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 12:28:36,340 ! documentation page.
2023-05-09 12:28:36,340 ! 
2023-05-09 12:28:36,340 ! 
2023-05-09 12:28:36,341 ! !!
2023-05-09 12:28:36,341 ! 
2023-05-09 12:28:36,341 ! check.warn(importable)
2023-05-09 12:28:36,341 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.css' as data is deprecated, please list it in `packages`.
2023-05-09 12:28:36,341 ! !!
2023-05-09 12:28:36,341 ! 
2023-05-09 12:28:36,341 ! 
2023-05-09 12:28:36,342 ! ############################
2023-05-09 12:28:36,342 ! # Package would be ignored #
2023-05-09 12:28:36,342 ! ############################
2023-05-09 12:28:36,342 ! Python recognizes 'octoprint_octolapse.static.css' as an importable package,
2023-05-09 12:28:36,342 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 12:28:36,342 ! 
2023-05-09 12:28:36,342 ! 'octoprint_octolapse.static.css' has been automatically added to the distribution only
2023-05-09 12:28:36,343 ! because it may contain data files, but this behavior is likely to change
2023-05-09 12:28:36,343 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 12:28:36,343 ! 
2023-05-09 12:28:36,343 ! Please make sure that 'octoprint_octolapse.static.css' is included as a package by using
2023-05-09 12:28:36,343 ! the `packages` configuration field or the proper discovery methods
2023-05-09 12:28:36,343 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 12:28:36,343 ! instead of `find_packages(...)`/`find:`).
2023-05-09 12:28:36,344 ! 
2023-05-09 12:28:36,344 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 12:28:36,344 ! documentation page.
2023-05-09 12:28:36,344 ! 
2023-05-09 12:28:36,344 ! 
2023-05-09 12:28:36,344 ! !!
2023-05-09 12:28:36,344 ! 
2023-05-09 12:28:36,344 ! check.warn(importable)
2023-05-09 12:28:36,345 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.docs.help' as data is deprecated, please list it in `packages`.
2023-05-09 12:28:36,345 ! !!
2023-05-09 12:28:36,345 ! 
2023-05-09 12:28:36,345 ! 
2023-05-09 12:28:36,345 ! ############################
2023-05-09 12:28:36,345 ! # Package would be ignored #
2023-05-09 12:28:36,345 ! ############################
2023-05-09 12:28:36,345 ! Python recognizes 'octoprint_octolapse.static.docs.help' as an importable package,
2023-05-09 12:28:36,346 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 12:28:36,346 ! 
2023-05-09 12:28:36,346 ! 'octoprint_octolapse.static.docs.help' has been automatically added to the distribution only
2023-05-09 12:28:36,346 ! because it may contain data files, but this behavior is likely to change
2023-05-09 12:28:36,346 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 12:28:36,346 ! 
2023-05-09 12:28:36,346 ! Please make sure that 'octoprint_octolapse.static.docs.help' is included as a package by using
2023-05-09 12:28:36,346 ! the `packages` configuration field or the proper discovery methods
2023-05-09 12:28:36,347 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 12:28:36,347 ! instead of `find_packages(...)`/`find:`).
2023-05-09 12:28:36,347 ! 
2023-05-09 12:28:36,347 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 12:28:36,347 ! documentation page.
2023-05-09 12:28:36,347 ! 
2023-05-09 12:28:36,347 ! 
2023-05-09 12:28:36,347 ! !!
2023-05-09 12:28:36,347 ! 
2023-05-09 12:28:36,348 ! check.warn(importable)
2023-05-09 12:28:36,348 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.img' as data is deprecated, please list it in `packages`.
2023-05-09 12:28:36,348 ! !!
2023-05-09 12:28:36,348 ! 
2023-05-09 12:28:36,348 ! 
2023-05-09 12:28:36,348 ! ############################
2023-05-09 12:28:36,348 ! # Package would be ignored #
2023-05-09 12:28:36,348 ! ############################
2023-05-09 12:28:36,349 ! Python recognizes 'octoprint_octolapse.static.img' as an importable package,
2023-05-09 12:28:36,349 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 12:28:36,349 ! 
2023-05-09 12:28:36,349 ! 'octoprint_octolapse.static.img' has been automatically added to the distribution only
2023-05-09 12:28:36,349 ! because it may contain data files, but this behavior is likely to change
2023-05-09 12:28:36,349 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 12:28:36,349 ! 
2023-05-09 12:28:36,349 ! Please make sure that 'octoprint_octolapse.static.img' is included as a package by using
2023-05-09 12:28:36,350 ! the `packages` configuration field or the proper discovery methods
2023-05-09 12:28:36,350 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 12:28:36,350 ! instead of `find_packages(...)`/`find:`).
2023-05-09 12:28:36,350 ! 
2023-05-09 12:28:36,350 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 12:28:36,350 ! documentation page.
2023-05-09 12:28:36,350 ! 
2023-05-09 12:28:36,350 ! 
2023-05-09 12:28:36,351 ! !!
2023-05-09 12:28:36,351 ! 
2023-05-09 12:28:36,351 ! check.warn(importable)
2023-05-09 12:28:36,351 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.js' as data is deprecated, please list it in `packages`.
2023-05-09 12:28:36,351 ! !!
2023-05-09 12:28:36,351 ! 
2023-05-09 12:28:36,351 ! 
2023-05-09 12:28:36,351 ! ############################
2023-05-09 12:28:36,352 ! # Package would be ignored #
2023-05-09 12:28:36,352 ! ############################
2023-05-09 12:28:36,352 ! Python recognizes 'octoprint_octolapse.static.js' as an importable package,
2023-05-09 12:28:36,352 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 12:28:36,352 ! 
2023-05-09 12:28:36,352 ! 'octoprint_octolapse.static.js' has been automatically added to the distribution only
2023-05-09 12:28:36,352 ! because it may contain data files, but this behavior is likely to change
2023-05-09 12:28:36,352 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 12:28:36,353 ! 
2023-05-09 12:28:36,353 ! Please make sure that 'octoprint_octolapse.static.js' is included as a package by using
2023-05-09 12:28:36,353 ! the `packages` configuration field or the proper discovery methods
2023-05-09 12:28:36,353 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 12:28:36,353 ! instead of `find_packages(...)`/`find:`).
2023-05-09 12:28:36,353 ! 
2023-05-09 12:28:36,353 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 12:28:36,353 ! documentation page.
2023-05-09 12:28:36,353 ! 
2023-05-09 12:28:36,354 ! 
2023-05-09 12:28:36,354 ! !!
2023-05-09 12:28:36,354 ! 
2023-05-09 12:28:36,354 ! check.warn(importable)
2023-05-09 12:28:36,354 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.js.webcams.mjpg_streamer' as data is deprecated, please list it in `packages`.
2023-05-09 12:28:36,354 ! !!
2023-05-09 12:28:36,354 ! 
2023-05-09 12:28:36,354 ! 
2023-05-09 12:28:36,355 ! ############################
2023-05-09 12:28:36,355 ! # Package would be ignored #
2023-05-09 12:28:36,355 ! ############################
2023-05-09 12:28:36,355 ! Python recognizes 'octoprint_octolapse.static.js.webcams.mjpg_streamer' as an importable package,
2023-05-09 12:28:36,355 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 12:28:36,355 ! 
2023-05-09 12:28:36,355 ! 'octoprint_octolapse.static.js.webcams.mjpg_streamer' has been automatically added to the distribution only
2023-05-09 12:28:36,355 ! because it may contain data files, but this behavior is likely to change
2023-05-09 12:28:36,356 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 12:28:36,356 ! 
2023-05-09 12:28:36,356 ! Please make sure that 'octoprint_octolapse.static.js.webcams.mjpg_streamer' is included as a package by using
2023-05-09 12:28:36,356 ! the `packages` configuration field or the proper discovery methods
2023-05-09 12:28:36,356 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 12:28:36,356 ! instead of `find_packages(...)`/`find:`).
2023-05-09 12:28:36,356 ! 
2023-05-09 12:28:36,357 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 12:28:36,357 ! documentation page.
2023-05-09 12:28:36,357 ! 
2023-05-09 12:28:36,357 ! 
2023-05-09 12:28:36,357 ! !!
2023-05-09 12:28:36,357 ! 
2023-05-09 12:28:36,357 ! check.warn(importable)
2023-05-09 12:28:36,357 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.templates' as data is deprecated, please list it in `packages`.
2023-05-09 12:28:36,358 ! !!
2023-05-09 12:28:36,358 ! 
2023-05-09 12:28:36,358 ! 
2023-05-09 12:28:36,358 ! ############################
2023-05-09 12:28:36,358 ! # Package would be ignored #
2023-05-09 12:28:36,358 ! ############################
2023-05-09 12:28:36,358 ! Python recognizes 'octoprint_octolapse.templates' as an importable package,
2023-05-09 12:28:36,358 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 12:28:36,359 ! 
2023-05-09 12:28:36,359 ! 'octoprint_octolapse.templates' has been automatically added to the distribution only
2023-05-09 12:28:36,359 ! because it may contain data files, but this behavior is likely to change
2023-05-09 12:28:36,359 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 12:28:36,359 ! 
2023-05-09 12:28:36,359 ! Please make sure that 'octoprint_octolapse.templates' is included as a package by using
2023-05-09 12:28:36,359 ! the `packages` configuration field or the proper discovery methods
2023-05-09 12:28:36,359 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 12:28:36,360 ! instead of `find_packages(...)`/`find:`).
2023-05-09 12:28:36,360 ! 
2023-05-09 12:28:36,360 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 12:28:36,360 ! documentation page.
2023-05-09 12:28:36,360 ! 
2023-05-09 12:28:36,360 ! 
2023-05-09 12:28:36,360 ! !!
2023-05-09 12:28:36,361 ! 
2023-05-09 12:28:36,361 ! check.warn(importable)
2023-05-09 12:28:36,361 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.templates.webcams.mjpg_streamer' as data is deprecated, please list it in `packages`.
2023-05-09 12:28:36,361 ! !!
2023-05-09 12:28:36,361 ! 
2023-05-09 12:28:36,361 ! 
2023-05-09 12:28:36,361 ! ############################
2023-05-09 12:28:36,361 ! # Package would be ignored #
2023-05-09 12:28:36,362 ! ############################
2023-05-09 12:28:36,362 ! Python recognizes 'octoprint_octolapse.templates.webcams.mjpg_streamer' as an importable package,
2023-05-09 12:28:36,362 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 12:28:36,362 ! 
2023-05-09 12:28:36,362 ! 'octoprint_octolapse.templates.webcams.mjpg_streamer' has been automatically added to the distribution only
2023-05-09 12:28:36,362 ! because it may contain data files, but this behavior is likely to change
2023-05-09 12:28:36,362 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 12:28:36,363 ! 
2023-05-09 12:28:36,363 ! Please make sure that 'octoprint_octolapse.templates.webcams.mjpg_streamer' is included as a package by using
2023-05-09 12:28:36,363 ! the `packages` configuration field or the proper discovery methods
2023-05-09 12:28:36,363 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 12:28:36,363 ! instead of `find_packages(...)`/`find:`).
2023-05-09 12:28:36,363 ! 
2023-05-09 12:28:36,363 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 12:28:36,363 ! documentation page.
2023-05-09 12:28:36,364 ! 
2023-05-09 12:28:36,364 ! 
2023-05-09 12:28:36,364 ! !!
2023-05-09 12:28:36,364 ! 
2023-05-09 12:28:36,364 ! check.warn(importable)
2023-05-09 12:28:36,364 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 12:28:36,364 ! copying octoprint_octolapse/data/settings_default_0.3.3rc3.dev0.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 12:28:36,365 ! copying octoprint_octolapse/data/settings_default_0.4.0.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 12:28:36,365 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev0.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 12:28:36,365 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev2.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 12:28:36,365 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev3.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 12:28:36,365 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev4.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 12:28:36,365 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev5.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 12:28:36,365 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 12:28:36,366 ! copying octoprint_octolapse/data/settings_default_0.4.0rc2.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 12:28:36,366 ! copying octoprint_octolapse/data/settings_default_0.4.0rc3.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 12:28:36,366 ! copying octoprint_octolapse/data/settings_default_current.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 12:28:36,366 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 12:28:36,366 ! copying octoprint_octolapse/data/Images/no-camera-selected.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 12:28:36,366 ! copying octoprint_octolapse/data/Images/no-image-available.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 12:28:36,366 ! copying octoprint_octolapse/data/Images/no_snapshot.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 12:28:36,366 ! copying octoprint_octolapse/data/Images/test-snapshot-image.jpg -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 12:28:36,367 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/fonts
2023-05-09 12:28:36,367 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/fonts/DejaVu
2023-05-09 12:28:36,367 ! copying octoprint_octolapse/data/fonts/DejaVu/DejaVuSansMono.ttf -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/fonts/DejaVu
2023-05-09 12:28:36,367 ! copying octoprint_octolapse/data/fonts/DejaVu/license.txt -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/fonts/DejaVu
2023-05-09 12:28:36,367 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib
2023-05-09 12:28:36,367 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:28:36,367 ! copying octoprint_octolapse/data/lib/c/extruder.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:28:36,367 ! copying octoprint_octolapse/data/lib/c/extruder.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:28:36,368 ! copying octoprint_octolapse/data/lib/c/gcode_comment_processor.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:28:36,368 ! copying octoprint_octolapse/data/lib/c/gcode_comment_processor.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:28:36,368 ! copying octoprint_octolapse/data/lib/c/gcode_parser.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:28:36,368 ! copying octoprint_octolapse/data/lib/c/gcode_parser.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:28:36,368 ! copying octoprint_octolapse/data/lib/c/gcode_position.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:28:36,368 ! copying octoprint_octolapse/data/lib/c/gcode_position.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:28:36,368 ! copying octoprint_octolapse/data/lib/c/gcode_position_processor.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:28:36,369 ! copying octoprint_octolapse/data/lib/c/gcode_position_processor.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:28:36,369 ! copying octoprint_octolapse/data/lib/c/logging.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:28:36,369 ! copying octoprint_octolapse/data/lib/c/logging.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:28:36,369 ! copying octoprint_octolapse/data/lib/c/parsed_command.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:28:36,369 ! copying octoprint_octolapse/data/lib/c/parsed_command.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:28:36,369 ! copying octoprint_octolapse/data/lib/c/parsed_command_parameter.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:28:36,369 ! copying octoprint_octolapse/data/lib/c/parsed_command_parameter.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:28:36,370 ! copying octoprint_octolapse/data/lib/c/position.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:28:36,370 ! copying octoprint_octolapse/data/lib/c/position.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:28:36,370 ! copying octoprint_octolapse/data/lib/c/python_helpers.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:28:36,370 ! copying octoprint_octolapse/data/lib/c/python_helpers.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:28:36,370 ! copying octoprint_octolapse/data/lib/c/snapshot_plan.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:28:36,370 ! copying octoprint_octolapse/data/lib/c/snapshot_plan.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:28:36,370 ! copying octoprint_octolapse/data/lib/c/snapshot_plan_step.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:28:36,371 ! copying octoprint_octolapse/data/lib/c/snapshot_plan_step.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:28:36,371 ! copying octoprint_octolapse/data/lib/c/stabilization.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:28:36,371 ! copying octoprint_octolapse/data/lib/c/stabilization.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:28:36,371 ! copying octoprint_octolapse/data/lib/c/stabilization_results.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:28:36,371 ! copying octoprint_octolapse/data/lib/c/stabilization_results.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:28:36,371 ! copying octoprint_octolapse/data/lib/c/stabilization_smart_gcode.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:28:36,371 ! copying octoprint_octolapse/data/lib/c/stabilization_smart_gcode.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:28:36,371 ! copying octoprint_octolapse/data/lib/c/stabilization_smart_layer.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:28:36,372 ! copying octoprint_octolapse/data/lib/c/stabilization_smart_layer.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:28:36,372 ! copying octoprint_octolapse/data/lib/c/stabilization_snap_to_print.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:28:36,372 ! copying octoprint_octolapse/data/lib/c/stabilization_snap_to_print.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:28:36,372 ! copying octoprint_octolapse/data/lib/c/trigger_position.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:28:36,372 ! copying octoprint_octolapse/data/lib/c/trigger_position.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:28:36,372 ! copying octoprint_octolapse/data/lib/c/utilities.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:28:36,373 ! copying octoprint_octolapse/data/lib/c/utilities.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:28:36,373 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts
2023-05-09 12:28:36,373 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode
2023-05-09 12:28:36,373 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 12:28:36,373 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 12:28:36,373 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_02_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 12:28:36,373 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_03_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 12:28:36,373 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_04_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 12:28:36,374 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_05_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 12:28:36,374 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_06_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 12:28:36,374 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_07_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 12:28:36,374 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_08_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 12:28:36,374 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 12:28:36,374 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 12:28:36,374 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_02_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 12:28:36,375 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_03_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 12:28:36,375 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_04_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 12:28:36,375 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_05_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 12:28:36,375 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_06_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 12:28:36,375 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_07_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 12:28:36,375 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_08_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 12:28:36,375 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 12:28:36,376 ! copying octoprint_octolapse/data/scripts/linux/capture_image_leave_on_camera.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 12:28:36,376 ! copying octoprint_octolapse/data/scripts/linux/download-from-camera-and-rename.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 12:28:36,376 ! copying octoprint_octolapse/data/scripts/linux/initialize_dslr.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 12:28:36,376 ! copying octoprint_octolapse/data/scripts/linux/move_snapshots_to_target.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 12:28:36,376 ! copying octoprint_octolapse/data/scripts/linux/take_snapshot_and_download.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 12:28:36,376 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/windows
2023-05-09 12:28:36,376 ! copying octoprint_octolapse/data/scripts/windows/take_snapshot_and_download.bat -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/windows
2023-05-09 12:28:36,377 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/templates
2023-05-09 12:28:36,377 ! copying octoprint_octolapse/data/templates/cura_gcode_settings_template.txt -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/templates
2023-05-09 12:28:36,377 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types
2023-05-09 12:28:36,377 ! copying octoprint_octolapse/data/webcam_types/camera_types.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types
2023-05-09 12:28:36,377 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 12:28:36,377 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/logitech_c250.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 12:28:36,377 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/logitech_c920.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 12:28:36,378 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/logitech_c920_2.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 12:28:36,378 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/logitech_c920_3.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 12:28:36,378 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/raspi_cam_v2.1.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 12:28:36,378 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/raspi_cam_v2.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 12:28:36,378 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static
2023-05-09 12:28:36,378 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/css
2023-05-09 12:28:36,378 ! copying octoprint_octolapse/static/css/jquery.minicolors.css -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/css
2023-05-09 12:28:36,378 ! copying octoprint_octolapse/static/css/jquery.minicolors.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/css
2023-05-09 12:28:36,379 ! copying octoprint_octolapse/static/css/octolapse.css -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/css
2023-05-09 12:28:36,379 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs
2023-05-09 12:28:36,379 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,379 ! copying octoprint_octolapse/static/docs/help/dialog.renderings.in_process.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,379 ! copying octoprint_octolapse/static/docs/help/dialog.renderings.unfinished.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,379 ! copying octoprint_octolapse/static/docs/help/dialog.timelapse_files.snapshot_archive.import.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,379 ! copying octoprint_octolapse/static/docs/help/dialog.timelapse_files.snapshot_archive.tab.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,380 ! copying octoprint_octolapse/static/docs/help/dialog.timelapse_files.timelapse.tab.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,380 ! copying octoprint_octolapse/static/docs/help/error_help_error_not_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,380 ! copying octoprint_octolapse/static/docs/help/error_help_init_automatic_slicer_no_settings_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,380 ! copying octoprint_octolapse/static/docs/help/error_help_init_automatic_slicer_settings_missing.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,380 ! copying octoprint_octolapse/static/docs/help/error_help_init_before_print_start_camera_script_apply_failed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,380 ! copying octoprint_octolapse/static/docs/help/error_help_init_camera_init_test_failed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,380 ! copying octoprint_octolapse/static/docs/help/error_help_init_camera_settings_apply_failed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,381 ! copying octoprint_octolapse/static/docs/help/error_help_init_cant_print_from_sd.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,381 ! copying octoprint_octolapse/static/docs/help/error_help_init_directory_test_failed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,381 ! copying octoprint_octolapse/static/docs/help/error_help_init_ffmpeg_not_found_at_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,381 ! copying octoprint_octolapse/static/docs/help/error_help_init_ffmpeg_path_not_set.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,381 ! copying octoprint_octolapse/static/docs/help/error_help_init_ffmpeg_path_retrieve_exception.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,381 ! copying octoprint_octolapse/static/docs/help/error_help_init_incorrect_octoprint_version.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,381 ! copying octoprint_octolapse/static/docs/help/error_help_init_incorrect_print_start_state.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,381 ! copying octoprint_octolapse/static/docs/help/error_help_init_m114_not_supported.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,382 ! copying octoprint_octolapse/static/docs/help/error_help_init_manual_slicer_settings_missing.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,382 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_current_job_data_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,382 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_current_job_file_data_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,382 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_enabled_cameras.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,382 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_gcode_filepath_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,382 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_printer_profile_exists.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,382 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_printer_profile_selected.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,383 ! copying octoprint_octolapse/static/docs/help/error_help_init_octolapse_is_disabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,383 ! copying octoprint_octolapse/static/docs/help/error_help_init_overlay_font_path_not_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,383 ! copying octoprint_octolapse/static/docs/help/error_help_init_printer_not_configured.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,383 ! copying octoprint_octolapse/static/docs/help/error_help_init_rendering_file_template_invalid.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,383 ! copying octoprint_octolapse/static/docs/help/error_help_init_timelapse_start_exception.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,383 ! copying octoprint_octolapse/static/docs/help/error_help_init_too_few_extruders_defined.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,383 ! copying octoprint_octolapse/static/docs/help/error_help_init_too_few_extruders_offsets_defined.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,383 ! copying octoprint_octolapse/static/docs/help/error_help_init_unable_to_accept_snapshot_plan.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,384 ! copying octoprint_octolapse/static/docs/help/error_help_init_unexpected_exception.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,384 ! copying octoprint_octolapse/static/docs/help/error_help_init_unknown_file_origin.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,384 ! copying octoprint_octolapse/static/docs/help/error_help_not_a_valid_error_dict.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,384 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_axis_mode_e_unknown.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,384 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_axis_mode_xyz_unknown.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,384 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_incorrect_trigger_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,384 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_no_definite_position.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,385 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_no_metric_units.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,385 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_no_snapshot_commands_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,385 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_no_snapshot_plans_returned.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,385 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_printer_not_primed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,385 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_unhandled_exception.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,385 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_unknown_trigger_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,385 ! copying octoprint_octolapse/static/docs/help/error_help_rendering_archive_import_no_files_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,385 ! copying octoprint_octolapse/static/docs/help/error_help_rendering_archive_import_zip_file_corrupt.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,386 ! copying octoprint_octolapse/static/docs/help/error_help_rendering_archive_import_zip_file_too_large.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,386 ! copying octoprint_octolapse/static/docs/help/error_help_settings_slicer_simplify3d_duplicate_toolhead_numbers.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,386 ! copying octoprint_octolapse/static/docs/help/error_help_settings_slicer_simplify3d_extruder_count_mismatch.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,386 ! copying octoprint_octolapse/static/docs/help/error_help_settings_slicer_simplify3d_max_extruder_count_exceeded.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,386 ! copying octoprint_octolapse/static/docs/help/error_help_settings_slicer_simplify3d_unexpected_max_toolhead_number.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,386 ! copying octoprint_octolapse/static/docs/help/error_help_timelapse_cannot_aquire_job_lock.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,386 ! copying octoprint_octolapse/static/docs/help/main_settings.auto_reload_frames.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,386 ! copying octoprint_octolapse/static/docs/help/main_settings.auto_reload_latest_snapshot.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,387 ! copying octoprint_octolapse/static/docs/help/main_settings.automatic_update_interval_days.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,387 ! copying octoprint_octolapse/static/docs/help/main_settings.automatic_updates_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,387 ! copying octoprint_octolapse/static/docs/help/main_settings.cancel_print_on_startup_error.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,387 ! copying octoprint_octolapse/static/docs/help/main_settings.enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,387 ! copying octoprint_octolapse/static/docs/help/main_settings.is_test_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,387 ! copying octoprint_octolapse/static/docs/help/main_settings.preview_snapshot_plan_autoclose.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,387 ! copying octoprint_octolapse/static/docs/help/main_settings.preview_snapshot_plan_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,387 ! copying octoprint_octolapse/static/docs/help/main_settings.preview_snapshot_plans.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,388 ! copying octoprint_octolapse/static/docs/help/main_settings.show_extruder_state_changes.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,388 ! copying octoprint_octolapse/static/docs/help/main_settings.show_navbar_icon.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,388 ! copying octoprint_octolapse/static/docs/help/main_settings.show_navbar_when_not_printing.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,388 ! copying octoprint_octolapse/static/docs/help/main_settings.show_position_changes.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,388 ! copying octoprint_octolapse/static/docs/help/main_settings.show_printer_state_changes.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,388 ! copying octoprint_octolapse/static/docs/help/main_settings.show_snapshot_plan_information.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,388 ! copying octoprint_octolapse/static/docs/help/main_settings.show_trigger_state_changes.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,389 ! copying octoprint_octolapse/static/docs/help/main_settings.snapshot_archive_directory.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,389 ! copying octoprint_octolapse/static/docs/help/main_settings.temporary_directory.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,389 ! copying octoprint_octolapse/static/docs/help/main_settings.timelapse_directory.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,389 ! copying octoprint_octolapse/static/docs/help/profiles.camera.apply_settings_at_startup.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,389 ! copying octoprint_octolapse/static/docs/help/profiles.camera.apply_settings_before_print.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,389 ! copying octoprint_octolapse/static/docs/help/profiles.camera.apply_settings_when_disabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,389 ! copying octoprint_octolapse/static/docs/help/profiles.camera.camera_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,390 ! copying octoprint_octolapse/static/docs/help/profiles.camera.delay.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,390 ! copying octoprint_octolapse/static/docs/help/profiles.camera.edit_cutsom_image_preferences.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,390 ! copying octoprint_octolapse/static/docs/help/profiles.camera.external_camera_snapshot_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,390 ! copying octoprint_octolapse/static/docs/help/profiles.camera.gcode_camera_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,390 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_after_render_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,390 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_after_snapshot_gcode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,390 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_after_snapshot_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,390 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_before_render_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,391 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_before_snapshot_gcode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,391 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_before_snapshot_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,391 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_print_end_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,391 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_print_start_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,391 ! copying octoprint_octolapse/static/docs/help/profiles.camera.snapshot_transpose.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,391 ! copying octoprint_octolapse/static/docs/help/profiles.camera.stream_template.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,391 ! copying octoprint_octolapse/static/docs/help/profiles.camera.timeout_ms.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,392 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.address.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,392 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.enable_custom_image_preferences.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,392 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.ignore_ssl_error.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,392 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.1.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,392 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029518.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,392 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029519.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,392 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029538.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,393 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029670.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,393 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029671.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,393 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029675.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,393 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094849.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,393 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094850.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,393 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094851.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,393 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094856.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,394 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094857.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,394 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094858.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,394 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094860.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,394 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094861.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,394 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094867.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,394 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094868.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,394 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094870.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,395 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094871.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,395 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094872.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,395 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094873.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,395 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094874.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,395 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10291459.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,395 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963776.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,395 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963777.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,396 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963778.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,396 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963788.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,396 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963790.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,396 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963791.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,396 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963795.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,396 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963796.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,396 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963797.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,397 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963800.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,397 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963802.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,397 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963803.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,397 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963804.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,397 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963807.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,397 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963810.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,398 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963818.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,398 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.password.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,398 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.snapshot_request_template.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,398 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.stream_download.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,398 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.username.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,398 ! copying octoprint_octolapse/static/docs/help/profiles.library.is_custom.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,398 ! copying octoprint_octolapse/static/docs/help/profiles.logging.enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,399 ! copying octoprint_octolapse/static/docs/help/profiles.logging.log_all_errors.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,399 ! copying octoprint_octolapse/static/docs/help/profiles.logging.log_to_console.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,399 ! copying octoprint_octolapse/static/docs/help/profiles.logging.logging_level.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,399 ! copying octoprint_octolapse/static/docs/help/profiles.logging.manage_log_files.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,399 ! copying octoprint_octolapse/static/docs/help/profiles.logging.modules_to_log.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,399 ! copying octoprint_octolapse/static/docs/help/profiles.printer.auto_detect_position.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,399 ! copying octoprint_octolapse/static/docs/help/profiles.printer.auto_position_detection_commands.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,400 ! copying octoprint_octolapse/static/docs/help/profiles.printer.automatic_configuration.is_automatic.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,400 ! copying octoprint_octolapse/static/docs/help/profiles.printer.automatic_configuration.make.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,400 ! copying octoprint_octolapse/static/docs/help/profiles.printer.automatic_configuration.model.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,400 ! copying octoprint_octolapse/static/docs/help/profiles.printer.bed_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,400 ! copying octoprint_octolapse/static/docs/help/profiles.printer.custom_bounding_box.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,400 ! copying octoprint_octolapse/static/docs/help/profiles.printer.default_extruder.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,401 ! copying octoprint_octolapse/static/docs/help/profiles.printer.default_firmware_retractions.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,401 ! copying octoprint_octolapse/static/docs/help/profiles.printer.default_firmware_retractions_zhop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,401 ! copying octoprint_octolapse/static/docs/help/profiles.printer.e_axis_default_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,401 ! copying octoprint_octolapse/static/docs/help/profiles.printer.extruder_offsets.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,401 ! copying octoprint_octolapse/static/docs/help/profiles.printer.g90_influences_extruder.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,401 ! copying octoprint_octolapse/static/docs/help/profiles.printer.gocde_axis_compatibility_mode_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,401 ! copying octoprint_octolapse/static/docs/help/profiles.printer.home_axis_gcode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,402 ! copying octoprint_octolapse/static/docs/help/profiles.printer.invert_e.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,402 ! copying octoprint_octolapse/static/docs/help/profiles.printer.invert_x.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,402 ! copying octoprint_octolapse/static/docs/help/profiles.printer.invert_y.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,402 ! copying octoprint_octolapse/static/docs/help/profiles.printer.invert_z.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,402 ! copying octoprint_octolapse/static/docs/help/profiles.printer.minimum_layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,402 ! copying octoprint_octolapse/static/docs/help/profiles.printer.num_extruders.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,403 ! copying octoprint_octolapse/static/docs/help/profiles.printer.origin_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,403 ! copying octoprint_octolapse/static/docs/help/profiles.printer.override_octoprint_profile_settings.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,403 ! copying octoprint_octolapse/static/docs/help/profiles.printer.priming_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,403 ! copying octoprint_octolapse/static/docs/help/profiles.printer.restrict_snapshot_area.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,403 ! copying octoprint_octolapse/static/docs/help/profiles.printer.shared_extruder.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,403 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicer_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,403 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.automatic.continue_on_failure.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,404 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.automatic.disable_automatic_save.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,404 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.4_2.speed_z_hop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,404 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,404 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.max_feedrate_z_override.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,404 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_amount.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,404 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_enable.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,404 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_hop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,405 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_hop_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,405 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_prime_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,405 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_retract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,405 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.smooth_spiralized_contours.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,405 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.speed_travel.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,405 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.axis_speed_display_unit_options.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,405 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.deretract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,406 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,406 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.retract_before_move.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,406 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.retract_length.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,406 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.retract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,406 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.travel_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,406 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.vase_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,406 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.z_hop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,407 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.z_travel_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,407 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.extruder_use_retract.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,407 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,407 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.retraction_distance.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,407 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.retraction_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,407 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.retraction_vertical_lift.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,407 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.vase_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,408 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.x_y_axis_movement_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,408 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.z_axis_movement_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,408 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.deretract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,408 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,408 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.retract_length.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,408 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.retract_lift.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,409 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.retract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,409 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.travel_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,409 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.vase_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,409 ! copying octoprint_octolapse/static/docs/help/profiles.printer.snapshot_command.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,409 ! copying octoprint_octolapse/static/docs/help/profiles.printer.suppress_snapshot_command_always.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,409 ! copying octoprint_octolapse/static/docs/help/profiles.printer.units_default.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,409 ! copying octoprint_octolapse/static/docs/help/profiles.printer.xyz_axes_default_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,410 ! copying octoprint_octolapse/static/docs/help/profiles.printer.zero_based_extruder.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,410 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.archive_snapshots.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,410 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.bitrate.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,410 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.constant_rate_factor.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,410 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.enable_watermark.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,410 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,410 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.fps.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,411 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.fps_calculation_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,411 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.max_fps.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,411 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.min_fps.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,411 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.output_format.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,411 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.output_template.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,411 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_font_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,411 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_font_size.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,412 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_outline_color.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,412 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_outline_width.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,412 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_preview.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,412 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_alignment.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,412 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_color.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,412 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_halign.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,412 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_pos_xy.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,413 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_template.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,413 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_template_current_time.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,413 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_template_time_elapsed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,413 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_valign.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,413 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.post_roll_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,413 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.pre_roll_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,413 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.run_length_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,414 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.thread_count.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,414 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.wait_for_moves_to_finish.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,414 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_fixed_coordinate.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,414 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_fixed_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,414 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_fixed_path_invert_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,414 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_fixed_path_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,414 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_relative.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,415 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_relative_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,415 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_relative_path_invert_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,415 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_relative_path_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,415 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,415 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_fixed_coordinate.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,415 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_fixed_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,415 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_fixed_path_invert_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,415 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_fixed_path_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,416 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_relative.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,416 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_relative_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,416 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_relative_path_invert_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,416 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_relative_path_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,416 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,416 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.calculate_intersections.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,416 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.extruder_state_requirements_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,417 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.layer_trigger_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,417 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.position_restriction_shape.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,417 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.position_restriction_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,417 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.position_restrictions_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,417 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.require_zhop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,417 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.smart_layer_disable_z_lift.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,417 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.smart_layer_snap_to_print_high_quality.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,417 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.smart_layer_snap_to_print_smooth.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,418 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.smart_layer_trigger_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,418 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.timer_trigger_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,418 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.trigger_subtype.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,418 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.trigger_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,418 ! copying octoprint_octolapse/static/docs/help/quality_issues_fast_trigger.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,418 ! copying octoprint_octolapse/static/docs/help/quality_issues_low_quality_snap_to_print.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,418 ! copying octoprint_octolapse/static/docs/help/quality_issues_no_print_features_detected.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,419 ! copying octoprint_octolapse/static/docs/help/settings.import.import_method.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,419 ! copying octoprint_octolapse/static/docs/help/settings.import.import_text.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,419 ! copying octoprint_octolapse/static/docs/help/snapshot_plan_missed_snapshots.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:28:36,419 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/img
2023-05-09 12:28:36,419 ! copying octoprint_octolapse/static/img/watermark.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/img
2023-05-09 12:28:36,419 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:28:36,419 ! copying octoprint_octolapse/static/js/jquery.minicolors.min.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:28:36,419 ! copying octoprint_octolapse/static/js/jquery.validate.min.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:28:36,420 ! copying octoprint_octolapse/static/js/octolapse.dialog.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:28:36,420 ! copying octoprint_octolapse/static/js/octolapse.dialog.renderings.in_process.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:28:36,420 ! copying octoprint_octolapse/static/js/octolapse.dialog.renderings.unfinished.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:28:36,420 ! copying octoprint_octolapse/static/js/octolapse.dialog.timelapse_files.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:28:36,420 ! copying octoprint_octolapse/static/js/octolapse.file_browser.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:28:36,420 ! copying octoprint_octolapse/static/js/octolapse.help.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:28:36,420 ! copying octoprint_octolapse/static/js/octolapse.helpers.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:28:36,421 ! copying octoprint_octolapse/static/js/octolapse.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:28:36,421 ! copying octoprint_octolapse/static/js/octolapse.profiles.camera.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:28:36,421 ! copying octoprint_octolapse/static/js/octolapse.profiles.camera.webcam.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:28:36,421 ! copying octoprint_octolapse/static/js/octolapse.profiles.camera.webcam.mjpg_streamer.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:28:36,421 ! copying octoprint_octolapse/static/js/octolapse.profiles.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:28:36,421 ! copying octoprint_octolapse/static/js/octolapse.profiles.library.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:28:36,421 ! copying octoprint_octolapse/static/js/octolapse.profiles.logging.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:28:36,422 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:28:36,422 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.slicer.cura.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:28:36,422 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.slicer.other.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:28:36,422 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.slicer.simplify_3d.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:28:36,422 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.slicer.slic3r_pe.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:28:36,422 ! copying octoprint_octolapse/static/js/octolapse.profiles.rendering.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:28:36,422 ! copying octoprint_octolapse/static/js/octolapse.profiles.stabilization.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:28:36,423 ! copying octoprint_octolapse/static/js/octolapse.profiles.trigger.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:28:36,423 ! copying octoprint_octolapse/static/js/octolapse.settings.import.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:28:36,423 ! copying octoprint_octolapse/static/js/octolapse.settings.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:28:36,423 ! copying octoprint_octolapse/static/js/octolapse.settings.main.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:28:36,423 ! copying octoprint_octolapse/static/js/octolapse.status.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:28:36,423 ! copying octoprint_octolapse/static/js/octolapse.status.snapshotplan.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:28:36,423 ! copying octoprint_octolapse/static/js/octolapse.status.snapshotplan_preview.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:28:36,423 ! copying octoprint_octolapse/static/js/showdown.min.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:28:36,424 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js/webcams
2023-05-09 12:28:36,424 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js/webcams/mjpg_streamer
2023-05-09 12:28:36,424 ! copying octoprint_octolapse/static/js/webcams/mjpg_streamer/raspi_cam_v2.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js/webcams/mjpg_streamer
2023-05-09 12:28:36,424 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:28:36,424 ! copying octoprint_octolapse/templates/octolapse_dialog.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:28:36,424 ! copying octoprint_octolapse/templates/octolapse_dialog_rendering_in_process.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:28:36,424 ! copying octoprint_octolapse/templates/octolapse_dialog_rendering_unfinished.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:28:36,425 ! copying octoprint_octolapse/templates/octolapse_dialog_timelapse_files.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:28:36,425 ! copying octoprint_octolapse/templates/octolapse_file_browser.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:28:36,425 ! copying octoprint_octolapse/templates/octolapse_helpers.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:28:36,425 ! copying octoprint_octolapse/templates/octolapse_navbar.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:28:36,425 ! copying octoprint_octolapse/templates/octolapse_profile_dialog_add_edit.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:28:36,425 ! copying octoprint_octolapse/templates/octolapse_profiles.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:28:36,425 ! copying octoprint_octolapse/templates/octolapse_profiles_camera.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:28:36,425 ! copying octoprint_octolapse/templates/octolapse_profiles_camera_webcam.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:28:36,426 ! copying octoprint_octolapse/templates/octolapse_profiles_camera_webcam_mjpg_streamer.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:28:36,426 ! copying octoprint_octolapse/templates/octolapse_profiles_library.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:28:36,426 ! copying octoprint_octolapse/templates/octolapse_profiles_logging.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:28:36,426 ! copying octoprint_octolapse/templates/octolapse_profiles_printer.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:28:36,426 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_automatic.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:28:36,426 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_automatic.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:28:36,426 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_cura.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:28:36,426 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_cura_4.2.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:28:36,427 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_other.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:28:36,427 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_simplify3d.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:28:36,427 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_slic3r_pe.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:28:36,427 ! copying octoprint_octolapse/templates/octolapse_profiles_rendering.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:28:36,427 ! copying octoprint_octolapse/templates/octolapse_profiles_stabilization.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:28:36,427 ! copying octoprint_octolapse/templates/octolapse_profiles_trigger.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:28:36,427 ! copying octoprint_octolapse/templates/octolapse_settings.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:28:36,428 ! copying octoprint_octolapse/templates/octolapse_settings_import.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:28:36,428 ! copying octoprint_octolapse/templates/octolapse_settings_main.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:28:36,428 ! copying octoprint_octolapse/templates/octolapse_snapshot_plan.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:28:36,428 ! copying octoprint_octolapse/templates/octolapse_status_extruder.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:28:36,428 ! copying octoprint_octolapse/templates/octolapse_status_position.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:28:36,428 ! copying octoprint_octolapse/templates/octolapse_status_printer_state.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:28:36,428 ! copying octoprint_octolapse/templates/octolapse_status_snapshot_plan.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:28:36,429 ! copying octoprint_octolapse/templates/octolapse_status_triggers.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:28:36,429 ! copying octoprint_octolapse/templates/octolapse_tab.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:28:36,429 ! copying octoprint_octolapse/templates/octolapse_tab_latest_snapshot.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:28:36,429 ! copying octoprint_octolapse/templates/octolapse_tab_settings_current.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:28:36,429 ! copying octoprint_octolapse/templates/octolapse_tab_settings_current_cameras.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:28:36,429 ! copying octoprint_octolapse/templates/octolapse_tab_snapshot_plan_preview_popup.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:28:36,429 ! copying octoprint_octolapse/templates/octolapse_tab_webcam_settings_popup.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:28:36,429 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams
2023-05-09 12:28:36,430 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams/mjpg_streamer
2023-05-09 12:28:36,430 ! copying octoprint_octolapse/templates/webcams/mjpg_streamer/logitech_c250.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams/mjpg_streamer
2023-05-09 12:28:36,430 ! copying octoprint_octolapse/templates/webcams/mjpg_streamer/logitech_c920.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams/mjpg_streamer
2023-05-09 12:28:36,430 ! copying octoprint_octolapse/templates/webcams/mjpg_streamer/raspi_cam_v2.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams/mjpg_streamer
2023-05-09 12:28:36,430 ! UPDATING build/lib.linux-aarch64-cpython-310/octoprint_octolapse/_version.py
2023-05-09 12:28:36,430 ! set build/lib.linux-aarch64-cpython-310/octoprint_octolapse/_version.py to 'v0.4.2'
2023-05-09 12:28:36,430 ! running build_ext
2023-05-09 12:28:36,431 ! Compiling Octolapse Parser Extension with <distutils.unixccompiler.UnixCCompiler object at 0x70f5bf54e0>.
2023-05-09 12:28:36,431 ! building 'GcodePositionProcessor' extension
2023-05-09 12:28:36,431 ! creating build/temp.linux-aarch64-cpython-310
2023-05-09 12:28:36,431 ! creating build/temp.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:28:36,431 ! creating build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 12:28:36,431 ! creating build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib
2023-05-09 12:28:36,431 ! creating build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:28:36,431 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/extruder.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/extruder.o -O3 -std=c++11
2023-05-09 12:28:36,432 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/gcode_comment_processor.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/gcode_comment_processor.o -O3 -std=c++11
2023-05-09 12:28:36,432 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.cpp: In member function 'void gcode_comment_processor::update_feature_from_section(position&) const':
2023-05-09 12:28:36,432 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.cpp:99:16: warning: enumeration value 'section_type_no_section' not handled in switch [-Wswitch]
2023-05-09 12:28:36,432 ! 99 |         switch (current_section_)
2023-05-09 12:28:36,432 ! |                ^
2023-05-09 12:28:36,432 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/gcode_parser.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/gcode_parser.o -O3 -std=c++11
2023-05-09 12:28:36,432 ! octoprint_octolapse/data/lib/c/gcode_parser.cpp: In member function 'bool gcode_parser::try_parse_gcode(const char*, parsed_command&)':
2023-05-09 12:28:36,433 ! octoprint_octolapse/data/lib/c/gcode_parser.cpp:148:47: warning: suggest parentheses around '&&' within '||' [-Wparentheses]
2023-05-09 12:28:36,433 ! 148 |     else if (cur_char > 32 || cur_char == ' ' && has_seen_character)
2023-05-09 12:28:36,433 ! |                               ~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:28:36,433 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/gcode_position.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/gcode_position.o -O3 -std=c++11
2023-05-09 12:28:36,433 ! octoprint_octolapse/data/lib/c/gcode_position.cpp: In member function 'void gcode_position::add_position(position&)':
2023-05-09 12:28:36,433 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:395:12: warning: operation on '((gcode_position*)this)->gcode_position::cur_pos_' may be undefined [-Wsequence-point]
2023-05-09 12:28:36,433 ! 395 |   cur_pos_ = (++cur_pos_) % NUM_POSITIONS;
2023-05-09 12:28:36,434 ! octoprint_octolapse/data/lib/c/gcode_position.cpp: In member function 'void gcode_position::add_position(parsed_command&)':
2023-05-09 12:28:36,434 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:402:12: warning: operation on '((gcode_position*)this)->gcode_position::cur_pos_' may be undefined [-Wsequence-point]
2023-05-09 12:28:36,434 ! 402 |   cur_pos_ = (++cur_pos_) % NUM_POSITIONS;
2023-05-09 12:28:36,434 ! octoprint_octolapse/data/lib/c/gcode_position.cpp: In member function 'void gcode_position::update(parsed_command&, long int, long int, long int)':
2023-05-09 12:28:36,434 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:659:31: warning: comparison of integer expressions of different signedness: 'const unsigned int' and 'int' [-Wsign-compare]
2023-05-09 12:28:36,434 ! 659 |                 if (increment > p_current_pos->height_increment && increment > 1)
2023-05-09 12:28:36,434 ! |                     ~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:28:36,435 ! octoprint_octolapse/data/lib/c/gcode_position.cpp: In member function 'void gcode_position::process_g10(position*, parsed_command&)':
2023-05-09 12:28:36,435 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:952:10: warning: variable 's' set but not used [-Wunused-but-set-variable]
2023-05-09 12:28:36,435 ! 952 |   double s = 0;
2023-05-09 12:28:36,435 ! |          ^
2023-05-09 12:28:36,435 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:953:8: warning: variable 'has_s' set but not used [-Wunused-but-set-variable]
2023-05-09 12:28:36,435 ! 953 |   bool has_s = false;
2023-05-09 12:28:36,435 ! |        ^~~~~
2023-05-09 12:28:36,436 ! In file included from octoprint_octolapse/data/lib/c/gcode_position.h:29,
2023-05-09 12:28:36,436 ! from octoprint_octolapse/data/lib/c/gcode_position.cpp:22:
2023-05-09 12:28:36,436 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h: At global scope:
2023-05-09 12:28:36,436 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:77:20: warning: 'SLICER_PE_SKIRT_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 12:28:36,436 ! 77 | static const char* SLICER_PE_SKIRT_COMMENTS[] = {"skirt", "move to first skirt point", NULL};
2023-05-09 12:28:36,436 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:28:36,436 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:73:20: warning: 'SLICER_PE_BRIDGE_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 12:28:36,437 ! 73 | static const char* SLICER_PE_BRIDGE_COMMENTS[] = {
2023-05-09 12:28:36,437 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:28:36,437 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:72:20: warning: 'SLICER_PE_GAP_FILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 12:28:36,437 ! 72 | static const char* SLICER_PE_GAP_FILL_COMMENTS[] = {"gap fill", "move to first gap fill point", NULL};
2023-05-09 12:28:36,437 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:28:36,437 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:69:20: warning: 'SLICER_PE_SOLID_INFILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 12:28:36,437 ! 69 | static const char* SLICER_PE_SOLID_INFILL_COMMENTS[] = {
2023-05-09 12:28:36,438 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:28:36,438 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:68:20: warning: 'SLICER_PE_INFILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 12:28:36,438 ! 68 | static const char* SLICER_PE_INFILL_COMMENTS[] = {"infill", "move to first infill point", NULL};
2023-05-09 12:28:36,438 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:28:36,438 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:67:20: warning: 'SLICER_PE_UNKNOWN_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 12:28:36,438 ! 67 | static const char* SLICER_PE_UNKNOWN_PERIMETER_COMMENTS[] = {"perimeter", "move to first perimeter point", NULL};
2023-05-09 12:28:36,438 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:28:36,438 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:64:20: warning: 'SLICER_PE_INNER_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 12:28:36,439 ! 64 | static const char* SLICER_PE_INNER_PERIMETER_COMMENTS[] = {
2023-05-09 12:28:36,439 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:28:36,439 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:61:20: warning: 'SLICER_PE_OUTER_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 12:28:36,439 ! 61 | static const char* SLICER_PE_OUTER_PERIMETER_COMMENTS[] = {
2023-05-09 12:28:36,439 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:28:36,439 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/gcode_position_processor.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/gcode_position_processor.o -O3 -std=c++11
2023-05-09 12:28:36,439 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:915: warning: ignoring '#pragma region location_detection_commands' [-Wunknown-pragmas]
2023-05-09 12:28:36,440 ! 915 | #pragma region location_detection_commands
2023-05-09 12:28:36,440 ! |
2023-05-09 12:28:36,440 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:955: warning: ignoring '#pragma endregion Parse' [-Wunknown-pragmas]
2023-05-09 12:28:36,440 ! 955 | #pragma endregion Parse the list of location detection commands
2023-05-09 12:28:36,440 ! |
2023-05-09 12:28:36,440 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1122: warning: ignoring '#pragma region Extract' [-Wunknown-pragmas]
2023-05-09 12:28:36,440 ! 1122 | #pragma region Extract extruder objects
2023-05-09 12:28:36,441 ! |
2023-05-09 12:28:36,441 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1219: warning: ignoring '#pragma endregion Parse' [-Wunknown-pragmas]
2023-05-09 12:28:36,441 ! 1219 | #pragma endregion Parse extruder objects
2023-05-09 12:28:36,441 ! |
2023-05-09 12:28:36,441 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1221: warning: ignoring '#pragma region Extract' [-Wunknown-pragmas]
2023-05-09 12:28:36,441 ! 1221 | #pragma region Extract firmware extruder offsets from the printer settings
2023-05-09 12:28:36,441 ! |
2023-05-09 12:28:36,442 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1334: warning: ignoring '#pragma endregion Extract' [-Wunknown-pragmas]
2023-05-09 12:28:36,442 ! 1334 | #pragma endregion Extract firmware extruder offsets from the printer settings
2023-05-09 12:28:36,442 ! |
2023-05-09 12:28:36,442 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp: In function 'int main(int, char**)':
2023-05-09 12:28:36,442 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:56:27: warning: 'void PyEval_InitThreads()' is deprecated [-Wdeprecated-declarations]
2023-05-09 12:28:36,442 ! 56 |         PyEval_InitThreads();
2023-05-09 12:28:36,442 ! |         ~~~~~~~~~~~~~~~~~~^~
2023-05-09 12:28:36,443 ! In file included from /usr/include/python3.10/Python.h:130,
2023-05-09 12:28:36,443 ! from octoprint_octolapse/data/lib/c/gcode_position_processor.h:30,
2023-05-09 12:28:36,443 ! from octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:23:
2023-05-09 12:28:36,443 ! /usr/include/python3.10/ceval.h:122:37: note: declared here
2023-05-09 12:28:36,443 ! 122 | Py_DEPRECATED(3.9) PyAPI_FUNC(void) PyEval_InitThreads(void);
2023-05-09 12:28:36,443 ! |                                     ^~~~~~~~~~~~~~~~~~
2023-05-09 12:28:36,443 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp: In function 'PyObject* Initialize(PyObject*, PyObject*)':
2023-05-09 12:28:36,444 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:371:19: warning: unused variable 'p_gcode_position' [-Wunused-variable]
2023-05-09 12:28:36,444 ! 371 |   gcode_position* p_gcode_position = NULL;
2023-05-09 12:28:36,444 ! |                   ^~~~~~~~~~~~~~~~
2023-05-09 12:28:36,444 ! In file included from /usr/include/c++/12.2.1/bits/cxxabi_init_exception.h:38,
2023-05-09 12:28:36,444 ! from /usr/include/c++/12.2.1/bits/exception_ptr.h:38,
2023-05-09 12:28:36,444 ! from /usr/include/c++/12.2.1/exception:168,
2023-05-09 12:28:36,444 ! from /usr/include/c++/12.2.1/stdexcept:38,
2023-05-09 12:28:36,445 ! from /usr/include/c++/12.2.1/system_error:41,
2023-05-09 12:28:36,445 ! from /usr/include/c++/12.2.1/bits/ios_base.h:46,
2023-05-09 12:28:36,445 ! from /usr/include/c++/12.2.1/iomanip:40,
2023-05-09 12:28:36,445 ! from octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:24:
2023-05-09 12:28:36,445 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp: In function 'bool ParseStabilizationArgs(PyObject*, stabilization_args*, PyObject**, PyObject**)':
2023-05-09 12:28:36,445 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1406:12: error: converting to 'bool' from 'std::nullptr_t' requires direct-initialization [-fpermissive]
2023-05-09 12:28:36,445 ! 1406 |     return NULL;
2023-05-09 12:28:36,446 ! |            ^~~~
2023-05-09 12:28:36,446 ! In file included from octoprint_octolapse/data/lib/c/gcode_position_processor.h:37:
2023-05-09 12:28:36,446 ! octoprint_octolapse/data/lib/c/stabilization_smart_gcode.h: At global scope:
2023-05-09 12:28:36,446 ! octoprint_octolapse/data/lib/c/stabilization_smart_gcode.h:5:20: warning: 'SMART_GCODE_STABILIZATION' defined but not used [-Wunused-variable]
2023-05-09 12:28:36,446 ! 5 | static const char* SMART_GCODE_STABILIZATION = "smart_gcode";
2023-05-09 12:28:36,446 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:28:36,446 ! In file included from octoprint_octolapse/data/lib/c/gcode_position_processor.h:36:
2023-05-09 12:28:36,446 ! octoprint_octolapse/data/lib/c/stabilization_smart_layer.h:11:20: warning: 'SMART_LAYER_STABILIZATION' defined but not used [-Wunused-variable]
2023-05-09 12:28:36,447 ! 11 | static const char* SMART_LAYER_STABILIZATION = "smart_layer";
2023-05-09 12:28:36,447 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:28:36,447 ! In file included from octoprint_octolapse/data/lib/c/gcode_position_processor.h:35:
2023-05-09 12:28:36,447 ! octoprint_octolapse/data/lib/c/stabilization.h:44:20: warning: 'send_parsed_command_never' defined but not used [-Wunused-variable]
2023-05-09 12:28:36,447 ! 44 | static const char* send_parsed_command_never = "never";
2023-05-09 12:28:36,447 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:28:36,447 ! octoprint_octolapse/data/lib/c/stabilization.h:43:20: warning: 'send_parsed_command_last' defined but not used [-Wunused-variable]
2023-05-09 12:28:36,447 ! 43 | static const char* send_parsed_command_last = "last";
2023-05-09 12:28:36,448 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:28:36,448 ! octoprint_octolapse/data/lib/c/stabilization.h:42:20: warning: 'send_parsed_command_first' defined but not used [-Wunused-variable]
2023-05-09 12:28:36,448 ! 42 | static const char* send_parsed_command_first = "first";
2023-05-09 12:28:36,448 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:28:36,448 ! octoprint_octolapse/data/lib/c/stabilization.h:41:20: warning: 'snapshot_action' defined but not used [-Wunused-variable]
2023-05-09 12:28:36,448 ! 41 | static const char* snapshot_action = "snapshot";
2023-05-09 12:28:36,448 ! |                    ^~~~~~~~~~~~~~~
2023-05-09 12:28:36,449 ! octoprint_octolapse/data/lib/c/stabilization.h:40:20: warning: 'travel_action' defined but not used [-Wunused-variable]
2023-05-09 12:28:36,449 ! 40 | static const char* travel_action = "travel";
2023-05-09 12:28:36,449 ! |                    ^~~~~~~~~~~~~
2023-05-09 12:28:36,449 ! In file included from octoprint_octolapse/data/lib/c/gcode_position.h:29,
2023-05-09 12:28:36,449 ! from octoprint_octolapse/data/lib/c/gcode_position_processor.h:33:
2023-05-09 12:28:36,449 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:77:20: warning: 'SLICER_PE_SKIRT_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 12:28:36,449 ! 77 | static const char* SLICER_PE_SKIRT_COMMENTS[] = {"skirt", "move to first skirt point", NULL};
2023-05-09 12:28:36,449 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:28:36,450 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:73:20: warning: 'SLICER_PE_BRIDGE_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 12:28:36,450 ! 73 | static const char* SLICER_PE_BRIDGE_COMMENTS[] = {
2023-05-09 12:28:36,450 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:28:36,450 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:72:20: warning: 'SLICER_PE_GAP_FILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 12:28:36,450 ! 72 | static const char* SLICER_PE_GAP_FILL_COMMENTS[] = {"gap fill", "move to first gap fill point", NULL};
2023-05-09 12:28:36,450 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:28:36,450 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:69:20: warning: 'SLICER_PE_SOLID_INFILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 12:28:36,450 ! 69 | static const char* SLICER_PE_SOLID_INFILL_COMMENTS[] = {
2023-05-09 12:28:36,451 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:28:36,451 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:68:20: warning: 'SLICER_PE_INFILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 12:28:36,451 ! 68 | static const char* SLICER_PE_INFILL_COMMENTS[] = {"infill", "move to first infill point", NULL};
2023-05-09 12:28:36,451 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:28:36,451 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:67:20: warning: 'SLICER_PE_UNKNOWN_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 12:28:36,451 ! 67 | static const char* SLICER_PE_UNKNOWN_PERIMETER_COMMENTS[] = {"perimeter", "move to first perimeter point", NULL};
2023-05-09 12:28:36,451 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:28:36,452 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:64:20: warning: 'SLICER_PE_INNER_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 12:28:36,452 ! 64 | static const char* SLICER_PE_INNER_PERIMETER_COMMENTS[] = {
2023-05-09 12:28:36,452 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:28:36,452 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:61:20: warning: 'SLICER_PE_OUTER_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 12:28:36,452 ! 61 | static const char* SLICER_PE_OUTER_PERIMETER_COMMENTS[] = {
2023-05-09 12:28:36,452 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:28:36,452 ! error: command '/usr/bin/gcc' failed with exit code 1
2023-05-09 12:28:36,452 ! [end of output]
2023-05-09 12:28:36,453 ! 
2023-05-09 12:28:36,453 ! note: This error originates from a subprocess, and is likely not a problem with pip.
2023-05-09 12:28:36,453 ! error: legacy-install-failure
2023-05-09 12:28:36,453 ! 
2023-05-09 12:28:36,453 ! × Encountered error while trying to install package.
2023-05-09 12:28:36,453 ! ╰─> Octolapse
2023-05-09 12:28:36,453 ! 
2023-05-09 12:28:36,454 ! note: This is an issue with the package mentioned above, not pip.
2023-05-09 12:28:36,454 ! hint: See above for output from the failure.
2023-05-09 12:57:36,959   /usr/bin/python3 -m pip --disable-pip-version-check install file:///tmp/tmp4dtoouxm/Octolapse-master.zip --no-cache-dir --user
2023-05-09 12:57:45,064 > Processing /tmp/tmp4dtoouxm/Octolapse-master.zip
2023-05-09 12:57:47,076 > Preparing metadata (setup.py): started
2023-05-09 12:58:08,403 > Preparing metadata (setup.py): finished with status 'done'
2023-05-09 12:58:08,406 > Requirement already satisfied: pillow>=6.2.0<7.0.0 in /usr/lib/python3.10/site-packages (from Octolapse==0.4.2) (9.3.0)
2023-05-09 12:58:08,409 > Requirement already satisfied: sarge in /usr/lib/python3.10/site-packages (from Octolapse==0.4.2) (0.1.6)
2023-05-09 12:58:08,412 > Requirement already satisfied: six in /usr/lib/python3.10/site-packages (from Octolapse==0.4.2) (1.16.0)
2023-05-09 12:58:08,417 > Requirement already satisfied: OctoPrint>1.3.8 in /usr/lib/python3.10/site-packages (from Octolapse==0.4.2) (1.8.7)
2023-05-09 12:58:08,421 > Requirement already satisfied: psutil in /usr/lib/python3.10/site-packages (from Octolapse==0.4.2) (5.9.4)
2023-05-09 12:58:08,422 > Requirement already satisfied: file_read_backwards in /usr/lib/python3.10/site-packages (from Octolapse==0.4.2) (3.0.0)
2023-05-09 12:58:08,423 > Requirement already satisfied: setuptools>=6.0 in /usr/lib/python3.10/site-packages (from Octolapse==0.4.2) (65.6.0)
2023-05-09 12:58:08,424 > Requirement already satisfied: awesome-slugify<1.7,>=1.6.5 in /usr/lib/python3.10/site-packages (from Octolapse==0.4.2) (1.6.5)
2023-05-09 12:58:08,425 > Requirement already satisfied: regex in /usr/lib/python3.10/site-packages (from awesome-slugify<1.7,>=1.6.5->Octolapse==0.4.2) (2022.10.31)
2023-05-09 12:58:08,426 > Requirement already satisfied: Unidecode<0.05,>=0.04.14 in /usr/lib/python3.10/site-packages (from awesome-slugify<1.7,>=1.6.5->Octolapse==0.4.2) (0.4.21)
2023-05-09 12:58:08,427 > Requirement already satisfied: OctoPrint-FileCheck>=2021.2.23 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2021.2.23)
2023-05-09 12:58:08,428 > Requirement already satisfied: OctoPrint-FirmwareCheck>=2021.10.11 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2021.10.11)
2023-05-09 12:58:08,429 > Requirement already satisfied: OctoPrint-PiSupport>=2022.6.13 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2022.6.13)
2023-05-09 12:58:08,430 > Requirement already satisfied: argon2_cffi<22,>=21.3.0 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (21.3.0)
2023-05-09 12:58:08,431 > Requirement already satisfied: cachelib<0.3,>=0.2 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (0.2.0)
2023-05-09 12:58:08,432 > Requirement already satisfied: Click<9,>=8.0.3 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (8.1.3)
2023-05-09 12:58:08,433 > Requirement already satisfied: colorlog<7,>=6 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (6.7.0)
2023-05-09 12:58:08,435 > Requirement already satisfied: emoji<2,>=1.4.2 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.7.0)
2023-05-09 12:58:08,436 > Requirement already satisfied: feedparser<7,>=6.0.8 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (6.0.10)
2023-05-09 12:58:08,437 > Requirement already satisfied: filetype<2,>=1.0.7 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.2.0)
2023-05-09 12:58:08,438 > Requirement already satisfied: Flask-Assets<3,>=2.0 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2.0)
2023-05-09 12:58:08,438 > Requirement already satisfied: Flask-Babel<3,>=2.0 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2.0.0)
2023-05-09 12:58:08,440 > Requirement already satisfied: Flask-Login<0.6,>=0.5 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (0.5.0)
2023-05-09 12:58:08,441 > Requirement already satisfied: Flask-Limiter<3,>=2.6 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2.9.2)
2023-05-09 12:58:08,442 > Requirement already satisfied: flask<2.2,>=2.1 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2.1.3)
2023-05-09 12:58:08,443 > Requirement already satisfied: frozendict<3,>=2.0 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2.3.7)
2023-05-09 12:58:08,444 > Requirement already satisfied: future<1,>=0.18.2 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (0.18.3)
2023-05-09 12:58:08,445 > Requirement already satisfied: markdown<4,>=3.2.2 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (3.4.3)
2023-05-09 12:58:08,446 > Requirement already satisfied: netaddr<0.9,>=0.8 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (0.8.0)
2023-05-09 12:58:08,450 > Requirement already satisfied: netifaces<1,>=0.11 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (0.11.0)
2023-05-09 12:58:08,451 > Requirement already satisfied: passlib<2,>=1.7.4 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.7.4)
2023-05-09 12:58:08,452 > Requirement already satisfied: pathvalidate<3,>=2.4.1 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2.5.2)
2023-05-09 12:58:08,454 > Requirement already satisfied: pkginfo<2,>=1.7.1 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.9.6)
2023-05-09 12:58:08,455 > Requirement already satisfied: pylru<2,>=1.2 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.2.1)
2023-05-09 12:58:08,455 > Requirement already satisfied: pyserial<4,>=3.4 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (3.5)
2023-05-09 12:58:08,456 > Requirement already satisfied: PyYAML<6,>=5.4.1 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (5.4.1)
2023-05-09 12:58:08,457 > Requirement already satisfied: requests<3,>=2.26.0 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2.28.2)
2023-05-09 12:58:08,458 > Requirement already satisfied: semantic_version<3,>=2.8.5 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2.10.0)
2023-05-09 12:58:08,459 > Requirement already satisfied: sentry-sdk<2,>=1.5.7 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.19.1)
2023-05-09 12:58:08,460 > Requirement already satisfied: tornado<7,>=6.0.4 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (6.2)
2023-05-09 12:58:08,461 > Requirement already satisfied: watchdog<2,>=1 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.0.2)
2023-05-09 12:58:08,462 > Requirement already satisfied: websocket-client<2,>=1.2.1 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.5.1)
2023-05-09 12:58:08,463 > Requirement already satisfied: werkzeug<2.1,>=2.0 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2.0.3)
2023-05-09 12:58:08,463 > Requirement already satisfied: wrapt<1.15,>=1.14 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.14.1)
2023-05-09 12:58:08,466 > Requirement already satisfied: zeroconf<0.34,>=0.33 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (0.33.4)
2023-05-09 12:58:08,467 > Requirement already satisfied: zipstream-ng<2.0.0,>=1.3.4 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.5.0)
2023-05-09 12:58:08,468 > Requirement already satisfied: blinker<2,>=1.4 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.6.1)
2023-05-09 12:58:08,469 > Requirement already satisfied: typing-extensions>=4.2 in /usr/lib/python3.10/site-packages (from blinker<2,>=1.4->OctoPrint>1.3.8->Octolapse==0.4.2) (4.5.0)
2023-05-09 12:58:08,470 > Requirement already satisfied: sgmllib3k in /usr/lib/python3.10/site-packages (from feedparser<7,>=6.0.8->OctoPrint>1.3.8->Octolapse==0.4.2) (1.0.0)
2023-05-09 12:58:08,471 > Requirement already satisfied: Jinja2>=3.0 in /usr/lib/python3.10/site-packages (from flask<2.2,>=2.1->OctoPrint>1.3.8->Octolapse==0.4.2) (3.1.2)
2023-05-09 12:58:08,472 > Requirement already satisfied: itsdangerous>=2.0 in /usr/lib/python3.10/site-packages (from flask<2.2,>=2.1->OctoPrint>1.3.8->Octolapse==0.4.2) (2.1.2)
2023-05-09 12:58:08,474 > Requirement already satisfied: webassets>=2.0 in /usr/lib/python3.10/site-packages (from Flask-Assets<3,>=2.0->OctoPrint>1.3.8->Octolapse==0.4.2) (2.0)
2023-05-09 12:58:08,476 > Requirement already satisfied: pytz in /usr/lib/python3.10/site-packages (from Flask-Babel<3,>=2.0->OctoPrint>1.3.8->Octolapse==0.4.2) (2023.3)
2023-05-09 12:58:08,477 > Requirement already satisfied: Babel>=2.3 in /usr/lib/python3.10/site-packages (from Flask-Babel<3,>=2.0->OctoPrint>1.3.8->Octolapse==0.4.2) (2.12.1)
2023-05-09 12:58:08,477 > Requirement already satisfied: limits>=2.8 in /usr/lib/python3.10/site-packages (from Flask-Limiter<3,>=2.6->OctoPrint>1.3.8->Octolapse==0.4.2) (3.3.1)
2023-05-09 12:58:08,478 > Requirement already satisfied: rich<13,>=12 in /usr/lib/python3.10/site-packages (from Flask-Limiter<3,>=2.6->OctoPrint>1.3.8->Octolapse==0.4.2) (12.6.0)
2023-05-09 12:58:08,478 > Requirement already satisfied: ordered-set<5,>4 in /usr/lib/python3.10/site-packages (from Flask-Limiter<3,>=2.6->OctoPrint>1.3.8->Octolapse==0.4.2) (4.1.0)
2023-05-09 12:58:08,478 > Requirement already satisfied: urllib3<1.27,>=1.21.1 in /usr/lib/python3.10/site-packages (from requests<3,>=2.26.0->OctoPrint>1.3.8->Octolapse==0.4.2) (1.26.15)
2023-05-09 12:58:08,478 > Requirement already satisfied: certifi>=2017.4.17 in /usr/lib/python3.10/site-packages (from requests<3,>=2.26.0->OctoPrint>1.3.8->Octolapse==0.4.2) (2022.12.7)
2023-05-09 12:58:08,479 > Requirement already satisfied: charset-normalizer<4,>=2 in /usr/lib/python3.10/site-packages (from requests<3,>=2.26.0->OctoPrint>1.3.8->Octolapse==0.4.2) (3.1.0)
2023-05-09 12:58:08,479 > Requirement already satisfied: idna<4,>=2.5 in /usr/lib/python3.10/site-packages (from requests<3,>=2.26.0->OctoPrint>1.3.8->Octolapse==0.4.2) (3.4)
2023-05-09 12:58:08,479 > Requirement already satisfied: ifaddr>=0.1.7 in /usr/lib/python3.10/site-packages (from zeroconf<0.34,>=0.33->OctoPrint>1.3.8->Octolapse==0.4.2) (0.2.0)
2023-05-09 12:58:08,479 > Requirement already satisfied: MarkupSafe>=2.0 in /usr/lib/python3.10/site-packages (from Jinja2>=3.0->flask<2.2,>=2.1->OctoPrint>1.3.8->Octolapse==0.4.2) (2.1.2)
2023-05-09 12:58:08,479 > Requirement already satisfied: importlib-resources>=1.3 in /usr/lib/python3.10/site-packages (from limits>=2.8->Flask-Limiter<3,>=2.6->OctoPrint>1.3.8->Octolapse==0.4.2) (5.12.0)
2023-05-09 12:58:08,480 > Requirement already satisfied: packaging<24,>=21 in /usr/lib/python3.10/site-packages (from limits>=2.8->Flask-Limiter<3,>=2.6->OctoPrint>1.3.8->Octolapse==0.4.2) (23.0)
2023-05-09 12:58:08,480 > Requirement already satisfied: deprecated>=1.2 in /usr/lib/python3.10/site-packages (from limits>=2.8->Flask-Limiter<3,>=2.6->OctoPrint>1.3.8->Octolapse==0.4.2) (1.2.13)
2023-05-09 12:58:08,480 > Requirement already satisfied: pygments<3.0.0,>=2.6.0 in /usr/lib/python3.10/site-packages (from rich<13,>=12->Flask-Limiter<3,>=2.6->OctoPrint>1.3.8->Octolapse==0.4.2) (2.15.0)
2023-05-09 12:58:08,481 > Requirement already satisfied: commonmark<0.10.0,>=0.9.0 in /usr/lib/python3.10/site-packages (from rich<13,>=12->Flask-Limiter<3,>=2.6->OctoPrint>1.3.8->Octolapse==0.4.2) (0.9.1)
2023-05-09 12:58:09,295 ! DEPRECATION: Octolapse is being installed using the legacy 'setup.py install' method, because it does not have a 'pyproject.toml' and the 'wheel' package is not installed. pip 23.1 will enforce this behaviour change. A possible replacement is to enable the '--use-pep517' option. Discussion can be found at https://github.com/pypa/pip/issues/8559
2023-05-09 12:58:09,800 > Installing collected packages: Octolapse
2023-05-09 12:58:09,801 > Running setup.py install for Octolapse: started
2023-05-09 12:59:09,976 > Running setup.py install for Octolapse: still running...
2023-05-09 12:59:12,990 > Running setup.py install for Octolapse: finished with status 'error'
2023-05-09 12:59:13,626 ! error: subprocess-exited-with-error
2023-05-09 12:59:13,627 ! 
2023-05-09 12:59:13,628 ! × Running setup.py install for Octolapse did not run successfully.
2023-05-09 12:59:13,628 ! │ exit code: 1
2023-05-09 12:59:13,629 ! ╰─> [1152 lines of output]
2023-05-09 12:59:13,629 ! likely tags: v0.4.2
2023-05-09 12:59:13,630 ! picking v0.4.2
2023-05-09 12:59:13,630 ! got version from expanded keyword {'version': 'v0.4.2', 'full-revisionid': 'c6c86782cdbfc3590fa4b1bf2e63064eb459b16b', 'dirty': False, 'error': None, 'date': '2023-04-02T10:23:21-0500'}
2023-05-09 12:59:13,632 ! Argon2 passlib backend is not available, not using it for password hashing
2023-05-09 12:59:13,633 ! /tmp/pip-req-build-qf7xnygu/setup.py:58: DeprecationWarning: distutils Version classes are deprecated. Use packaging.version instead.
2023-05-09 12:59:13,634 ! if LooseVersion(octoprint.server.VERSION) < LooseVersion("1.4"):
2023-05-09 12:59:13,635 ! Found packages: {'octoprint_octolapse', 'octoprint_octolapse.test', 'octoprint_octolapse_setuptools'}
2023-05-09 12:59:13,635 ! running install
2023-05-09 12:59:13,635 ! /usr/lib/python3.10/site-packages/setuptools/command/install.py:34: SetuptoolsDeprecationWarning: setup.py install is deprecated. Use build and pip and other standards-based tools.
2023-05-09 12:59:13,636 ! warnings.warn(
2023-05-09 12:59:13,636 ! running build
2023-05-09 12:59:13,637 ! running build_py
2023-05-09 12:59:13,637 ! creating build
2023-05-09 12:59:13,637 ! creating build/lib.linux-aarch64-cpython-310
2023-05-09 12:59:13,638 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:59:13,638 ! copying octoprint_octolapse/snapshot.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:59:13,639 ! copying octoprint_octolapse/log.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:59:13,639 ! copying octoprint_octolapse/__init__.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:59:13,640 ! copying octoprint_octolapse/messenger_worker.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:59:13,640 ! copying octoprint_octolapse/gcode_processor.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:59:13,641 ! copying octoprint_octolapse/gcode_commands.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:59:13,641 ! copying octoprint_octolapse/camera.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:59:13,641 ! copying octoprint_octolapse/position.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:59:13,642 ! copying octoprint_octolapse/stabilization_preprocessing.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:59:13,642 ! copying octoprint_octolapse/utility.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:59:13,643 ! copying octoprint_octolapse/settings_external.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:59:13,643 ! copying octoprint_octolapse/render.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:59:13,644 ! copying octoprint_octolapse/settings_preprocessor.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:59:13,644 ! copying octoprint_octolapse/script.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:59:13,645 ! copying octoprint_octolapse/migration.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:59:13,645 ! copying octoprint_octolapse/_version.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:59:13,645 ! copying octoprint_octolapse/stabilization_gcode.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:59:13,646 ! copying octoprint_octolapse/settings.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:59:13,646 ! copying octoprint_octolapse/error_messages.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:59:13,646 ! copying octoprint_octolapse/trigger.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:59:13,647 ! copying octoprint_octolapse/timelapse.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:59:13,648 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 12:59:13,649 ! copying octoprint_octolapse/test/test_settings.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 12:59:13,649 ! copying octoprint_octolapse/test/test_trigger_layer.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 12:59:13,649 ! copying octoprint_octolapse/test/__init__.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 12:59:13,650 ! copying octoprint_octolapse/test/test_extruder.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 12:59:13,650 ! copying octoprint_octolapse/test/test_parsing.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 12:59:13,650 ! copying octoprint_octolapse/test/test_render.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 12:59:13,651 ! copying octoprint_octolapse/test/test_timelapse.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 12:59:13,651 ! copying octoprint_octolapse/test/test_intersection.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 12:59:13,651 ! copying octoprint_octolapse/test/test_trigger_gcode.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 12:59:13,655 ! copying octoprint_octolapse/test/testing_utilities.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 12:59:13,657 ! copying octoprint_octolapse/test/test_octolapseplugin.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 12:59:13,658 ! copying octoprint_octolapse/test/test_position.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 12:59:13,659 ! copying octoprint_octolapse/test/test_trigger_timer.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 12:59:13,663 ! copying octoprint_octolapse/test/test_command.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 12:59:13,663 ! copying octoprint_octolapse/test/test_settings_slicer.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 12:59:13,663 ! copying octoprint_octolapse/test/test_utility.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 12:59:13,664 ! copying octoprint_octolapse/test/test_snapshotGcode.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 12:59:13,664 ! copying octoprint_octolapse/test/test_migration_version.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 12:59:13,664 ! copying octoprint_octolapse/test/test_trigger.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 12:59:13,665 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse_setuptools
2023-05-09 12:59:13,665 ! copying octoprint_octolapse_setuptools/__init__.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse_setuptools
2023-05-09 12:59:13,665 ! running egg_info
2023-05-09 12:59:13,666 ! creating Octolapse.egg-info
2023-05-09 12:59:13,666 ! writing Octolapse.egg-info/PKG-INFO
2023-05-09 12:59:13,666 ! writing dependency_links to Octolapse.egg-info/dependency_links.txt
2023-05-09 12:59:13,667 ! writing entry points to Octolapse.egg-info/entry_points.txt
2023-05-09 12:59:13,667 ! writing requirements to Octolapse.egg-info/requires.txt
2023-05-09 12:59:13,667 ! writing top-level names to Octolapse.egg-info/top_level.txt
2023-05-09 12:59:13,667 ! writing manifest file 'Octolapse.egg-info/SOURCES.txt'
2023-05-09 12:59:13,668 ! reading manifest file 'Octolapse.egg-info/SOURCES.txt'
2023-05-09 12:59:13,668 ! reading manifest template 'MANIFEST.in'
2023-05-09 12:59:13,668 ! warning: no files found matching 'README.md'
2023-05-09 12:59:13,669 ! warning: no files found matching '*' under directory 'octoprint_octolapse/translations'
2023-05-09 12:59:13,669 ! warning: no files found matching '*' under directory 'octoprint_octolapse/data/images'
2023-05-09 12:59:13,669 ! adding license file 'LICENSE'
2023-05-09 12:59:13,670 ! writing manifest file 'Octolapse.egg-info/SOURCES.txt'
2023-05-09 12:59:13,670 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data' as data is deprecated, please list it in `packages`.
2023-05-09 12:59:13,670 ! !!
2023-05-09 12:59:13,670 ! 
2023-05-09 12:59:13,671 ! 
2023-05-09 12:59:13,671 ! ############################
2023-05-09 12:59:13,671 ! # Package would be ignored #
2023-05-09 12:59:13,672 ! ############################
2023-05-09 12:59:13,672 ! Python recognizes 'octoprint_octolapse.data' as an importable package,
2023-05-09 12:59:13,672 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 12:59:13,673 ! 
2023-05-09 12:59:13,673 ! 'octoprint_octolapse.data' has been automatically added to the distribution only
2023-05-09 12:59:13,673 ! because it may contain data files, but this behavior is likely to change
2023-05-09 12:59:13,673 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 12:59:13,674 ! 
2023-05-09 12:59:13,674 ! Please make sure that 'octoprint_octolapse.data' is included as a package by using
2023-05-09 12:59:13,674 ! the `packages` configuration field or the proper discovery methods
2023-05-09 12:59:13,675 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 12:59:13,675 ! instead of `find_packages(...)`/`find:`).
2023-05-09 12:59:13,675 ! 
2023-05-09 12:59:13,676 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 12:59:13,676 ! documentation page.
2023-05-09 12:59:13,676 ! 
2023-05-09 12:59:13,676 ! 
2023-05-09 12:59:13,677 ! !!
2023-05-09 12:59:13,677 ! 
2023-05-09 12:59:13,677 ! check.warn(importable)
2023-05-09 12:59:13,678 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.Images' as data is deprecated, please list it in `packages`.
2023-05-09 12:59:13,678 ! !!
2023-05-09 12:59:13,678 ! 
2023-05-09 12:59:13,679 ! 
2023-05-09 12:59:13,679 ! ############################
2023-05-09 12:59:13,679 ! # Package would be ignored #
2023-05-09 12:59:13,679 ! ############################
2023-05-09 12:59:13,680 ! Python recognizes 'octoprint_octolapse.data.Images' as an importable package,
2023-05-09 12:59:13,680 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 12:59:13,680 ! 
2023-05-09 12:59:13,681 ! 'octoprint_octolapse.data.Images' has been automatically added to the distribution only
2023-05-09 12:59:13,681 ! because it may contain data files, but this behavior is likely to change
2023-05-09 12:59:13,681 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 12:59:13,682 ! 
2023-05-09 12:59:13,682 ! Please make sure that 'octoprint_octolapse.data.Images' is included as a package by using
2023-05-09 12:59:13,682 ! the `packages` configuration field or the proper discovery methods
2023-05-09 12:59:13,682 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 12:59:13,683 ! instead of `find_packages(...)`/`find:`).
2023-05-09 12:59:13,683 ! 
2023-05-09 12:59:13,683 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 12:59:13,684 ! documentation page.
2023-05-09 12:59:13,684 ! 
2023-05-09 12:59:13,684 ! 
2023-05-09 12:59:13,685 ! !!
2023-05-09 12:59:13,685 ! 
2023-05-09 12:59:13,685 ! check.warn(importable)
2023-05-09 12:59:13,685 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.fonts.DejaVu' as data is deprecated, please list it in `packages`.
2023-05-09 12:59:13,686 ! !!
2023-05-09 12:59:13,686 ! 
2023-05-09 12:59:13,686 ! 
2023-05-09 12:59:13,686 ! ############################
2023-05-09 12:59:13,686 ! # Package would be ignored #
2023-05-09 12:59:13,686 ! ############################
2023-05-09 12:59:13,687 ! Python recognizes 'octoprint_octolapse.data.fonts.DejaVu' as an importable package,
2023-05-09 12:59:13,687 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 12:59:13,687 ! 
2023-05-09 12:59:13,687 ! 'octoprint_octolapse.data.fonts.DejaVu' has been automatically added to the distribution only
2023-05-09 12:59:13,687 ! because it may contain data files, but this behavior is likely to change
2023-05-09 12:59:13,687 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 12:59:13,688 ! 
2023-05-09 12:59:13,688 ! Please make sure that 'octoprint_octolapse.data.fonts.DejaVu' is included as a package by using
2023-05-09 12:59:13,688 ! the `packages` configuration field or the proper discovery methods
2023-05-09 12:59:13,688 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 12:59:13,688 ! instead of `find_packages(...)`/`find:`).
2023-05-09 12:59:13,689 ! 
2023-05-09 12:59:13,689 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 12:59:13,689 ! documentation page.
2023-05-09 12:59:13,689 ! 
2023-05-09 12:59:13,689 ! 
2023-05-09 12:59:13,689 ! !!
2023-05-09 12:59:13,690 ! 
2023-05-09 12:59:13,690 ! check.warn(importable)
2023-05-09 12:59:13,690 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.lib.c' as data is deprecated, please list it in `packages`.
2023-05-09 12:59:13,690 ! !!
2023-05-09 12:59:13,690 ! 
2023-05-09 12:59:13,691 ! 
2023-05-09 12:59:13,691 ! ############################
2023-05-09 12:59:13,691 ! # Package would be ignored #
2023-05-09 12:59:13,691 ! ############################
2023-05-09 12:59:13,691 ! Python recognizes 'octoprint_octolapse.data.lib.c' as an importable package,
2023-05-09 12:59:13,691 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 12:59:13,692 ! 
2023-05-09 12:59:13,692 ! 'octoprint_octolapse.data.lib.c' has been automatically added to the distribution only
2023-05-09 12:59:13,692 ! because it may contain data files, but this behavior is likely to change
2023-05-09 12:59:13,692 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 12:59:13,692 ! 
2023-05-09 12:59:13,692 ! Please make sure that 'octoprint_octolapse.data.lib.c' is included as a package by using
2023-05-09 12:59:13,693 ! the `packages` configuration field or the proper discovery methods
2023-05-09 12:59:13,693 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 12:59:13,693 ! instead of `find_packages(...)`/`find:`).
2023-05-09 12:59:13,693 ! 
2023-05-09 12:59:13,693 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 12:59:13,694 ! documentation page.
2023-05-09 12:59:13,694 ! 
2023-05-09 12:59:13,694 ! 
2023-05-09 12:59:13,694 ! !!
2023-05-09 12:59:13,694 ! 
2023-05-09 12:59:13,694 ! check.warn(importable)
2023-05-09 12:59:13,695 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.scripts.gcode.cura' as data is deprecated, please list it in `packages`.
2023-05-09 12:59:13,695 ! !!
2023-05-09 12:59:13,695 ! 
2023-05-09 12:59:13,695 ! 
2023-05-09 12:59:13,695 ! ############################
2023-05-09 12:59:13,695 ! # Package would be ignored #
2023-05-09 12:59:13,696 ! ############################
2023-05-09 12:59:13,696 ! Python recognizes 'octoprint_octolapse.data.scripts.gcode.cura' as an importable package,
2023-05-09 12:59:13,696 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 12:59:13,696 ! 
2023-05-09 12:59:13,696 ! 'octoprint_octolapse.data.scripts.gcode.cura' has been automatically added to the distribution only
2023-05-09 12:59:13,697 ! because it may contain data files, but this behavior is likely to change
2023-05-09 12:59:13,697 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 12:59:13,697 ! 
2023-05-09 12:59:13,697 ! Please make sure that 'octoprint_octolapse.data.scripts.gcode.cura' is included as a package by using
2023-05-09 12:59:13,697 ! the `packages` configuration field or the proper discovery methods
2023-05-09 12:59:13,697 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 12:59:13,698 ! instead of `find_packages(...)`/`find:`).
2023-05-09 12:59:13,698 ! 
2023-05-09 12:59:13,698 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 12:59:13,698 ! documentation page.
2023-05-09 12:59:13,698 ! 
2023-05-09 12:59:13,698 ! 
2023-05-09 12:59:13,699 ! !!
2023-05-09 12:59:13,699 ! 
2023-05-09 12:59:13,699 ! check.warn(importable)
2023-05-09 12:59:13,699 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.scripts.linux' as data is deprecated, please list it in `packages`.
2023-05-09 12:59:13,699 ! !!
2023-05-09 12:59:13,700 ! 
2023-05-09 12:59:13,700 ! 
2023-05-09 12:59:13,700 ! ############################
2023-05-09 12:59:13,700 ! # Package would be ignored #
2023-05-09 12:59:13,700 ! ############################
2023-05-09 12:59:13,700 ! Python recognizes 'octoprint_octolapse.data.scripts.linux' as an importable package,
2023-05-09 12:59:13,701 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 12:59:13,701 ! 
2023-05-09 12:59:13,701 ! 'octoprint_octolapse.data.scripts.linux' has been automatically added to the distribution only
2023-05-09 12:59:13,701 ! because it may contain data files, but this behavior is likely to change
2023-05-09 12:59:13,701 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 12:59:13,702 ! 
2023-05-09 12:59:13,702 ! Please make sure that 'octoprint_octolapse.data.scripts.linux' is included as a package by using
2023-05-09 12:59:13,702 ! the `packages` configuration field or the proper discovery methods
2023-05-09 12:59:13,702 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 12:59:13,702 ! instead of `find_packages(...)`/`find:`).
2023-05-09 12:59:13,702 ! 
2023-05-09 12:59:13,703 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 12:59:13,703 ! documentation page.
2023-05-09 12:59:13,703 ! 
2023-05-09 12:59:13,703 ! 
2023-05-09 12:59:13,703 ! !!
2023-05-09 12:59:13,704 ! 
2023-05-09 12:59:13,704 ! check.warn(importable)
2023-05-09 12:59:13,704 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.scripts.windows' as data is deprecated, please list it in `packages`.
2023-05-09 12:59:13,704 ! !!
2023-05-09 12:59:13,704 ! 
2023-05-09 12:59:13,704 ! 
2023-05-09 12:59:13,705 ! ############################
2023-05-09 12:59:13,705 ! # Package would be ignored #
2023-05-09 12:59:13,705 ! ############################
2023-05-09 12:59:13,705 ! Python recognizes 'octoprint_octolapse.data.scripts.windows' as an importable package,
2023-05-09 12:59:13,705 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 12:59:13,705 ! 
2023-05-09 12:59:13,706 ! 'octoprint_octolapse.data.scripts.windows' has been automatically added to the distribution only
2023-05-09 12:59:13,706 ! because it may contain data files, but this behavior is likely to change
2023-05-09 12:59:13,706 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 12:59:13,706 ! 
2023-05-09 12:59:13,706 ! Please make sure that 'octoprint_octolapse.data.scripts.windows' is included as a package by using
2023-05-09 12:59:13,707 ! the `packages` configuration field or the proper discovery methods
2023-05-09 12:59:13,707 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 12:59:13,707 ! instead of `find_packages(...)`/`find:`).
2023-05-09 12:59:13,707 ! 
2023-05-09 12:59:13,707 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 12:59:13,707 ! documentation page.
2023-05-09 12:59:13,708 ! 
2023-05-09 12:59:13,708 ! 
2023-05-09 12:59:13,708 ! !!
2023-05-09 12:59:13,708 ! 
2023-05-09 12:59:13,708 ! check.warn(importable)
2023-05-09 12:59:13,708 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.templates' as data is deprecated, please list it in `packages`.
2023-05-09 12:59:13,709 ! !!
2023-05-09 12:59:13,709 ! 
2023-05-09 12:59:13,709 ! 
2023-05-09 12:59:13,709 ! ############################
2023-05-09 12:59:13,709 ! # Package would be ignored #
2023-05-09 12:59:13,710 ! ############################
2023-05-09 12:59:13,710 ! Python recognizes 'octoprint_octolapse.data.templates' as an importable package,
2023-05-09 12:59:13,710 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 12:59:13,710 ! 
2023-05-09 12:59:13,710 ! 'octoprint_octolapse.data.templates' has been automatically added to the distribution only
2023-05-09 12:59:13,710 ! because it may contain data files, but this behavior is likely to change
2023-05-09 12:59:13,711 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 12:59:13,711 ! 
2023-05-09 12:59:13,711 ! Please make sure that 'octoprint_octolapse.data.templates' is included as a package by using
2023-05-09 12:59:13,711 ! the `packages` configuration field or the proper discovery methods
2023-05-09 12:59:13,711 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 12:59:13,711 ! instead of `find_packages(...)`/`find:`).
2023-05-09 12:59:13,712 ! 
2023-05-09 12:59:13,712 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 12:59:13,712 ! documentation page.
2023-05-09 12:59:13,712 ! 
2023-05-09 12:59:13,712 ! 
2023-05-09 12:59:13,713 ! !!
2023-05-09 12:59:13,713 ! 
2023-05-09 12:59:13,713 ! check.warn(importable)
2023-05-09 12:59:13,713 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.webcam_types' as data is deprecated, please list it in `packages`.
2023-05-09 12:59:13,713 ! !!
2023-05-09 12:59:13,713 ! 
2023-05-09 12:59:13,714 ! 
2023-05-09 12:59:13,714 ! ############################
2023-05-09 12:59:13,714 ! # Package would be ignored #
2023-05-09 12:59:13,714 ! ############################
2023-05-09 12:59:13,714 ! Python recognizes 'octoprint_octolapse.data.webcam_types' as an importable package,
2023-05-09 12:59:13,714 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 12:59:13,715 ! 
2023-05-09 12:59:13,715 ! 'octoprint_octolapse.data.webcam_types' has been automatically added to the distribution only
2023-05-09 12:59:13,715 ! because it may contain data files, but this behavior is likely to change
2023-05-09 12:59:13,715 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 12:59:13,715 ! 
2023-05-09 12:59:13,715 ! Please make sure that 'octoprint_octolapse.data.webcam_types' is included as a package by using
2023-05-09 12:59:13,716 ! the `packages` configuration field or the proper discovery methods
2023-05-09 12:59:13,716 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 12:59:13,716 ! instead of `find_packages(...)`/`find:`).
2023-05-09 12:59:13,716 ! 
2023-05-09 12:59:13,716 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 12:59:13,717 ! documentation page.
2023-05-09 12:59:13,717 ! 
2023-05-09 12:59:13,717 ! 
2023-05-09 12:59:13,717 ! !!
2023-05-09 12:59:13,717 ! 
2023-05-09 12:59:13,717 ! check.warn(importable)
2023-05-09 12:59:13,718 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.webcam_types.mjpg_streamer' as data is deprecated, please list it in `packages`.
2023-05-09 12:59:13,718 ! !!
2023-05-09 12:59:13,718 ! 
2023-05-09 12:59:13,718 ! 
2023-05-09 12:59:13,718 ! ############################
2023-05-09 12:59:13,718 ! # Package would be ignored #
2023-05-09 12:59:13,719 ! ############################
2023-05-09 12:59:13,719 ! Python recognizes 'octoprint_octolapse.data.webcam_types.mjpg_streamer' as an importable package,
2023-05-09 12:59:13,719 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 12:59:13,719 ! 
2023-05-09 12:59:13,719 ! 'octoprint_octolapse.data.webcam_types.mjpg_streamer' has been automatically added to the distribution only
2023-05-09 12:59:13,719 ! because it may contain data files, but this behavior is likely to change
2023-05-09 12:59:13,720 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 12:59:13,720 ! 
2023-05-09 12:59:13,720 ! Please make sure that 'octoprint_octolapse.data.webcam_types.mjpg_streamer' is included as a package by using
2023-05-09 12:59:13,720 ! the `packages` configuration field or the proper discovery methods
2023-05-09 12:59:13,720 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 12:59:13,721 ! instead of `find_packages(...)`/`find:`).
2023-05-09 12:59:13,721 ! 
2023-05-09 12:59:13,721 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 12:59:13,721 ! documentation page.
2023-05-09 12:59:13,721 ! 
2023-05-09 12:59:13,721 ! 
2023-05-09 12:59:13,722 ! !!
2023-05-09 12:59:13,722 ! 
2023-05-09 12:59:13,722 ! check.warn(importable)
2023-05-09 12:59:13,722 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.css' as data is deprecated, please list it in `packages`.
2023-05-09 12:59:13,722 ! !!
2023-05-09 12:59:13,722 ! 
2023-05-09 12:59:13,723 ! 
2023-05-09 12:59:13,723 ! ############################
2023-05-09 12:59:13,723 ! # Package would be ignored #
2023-05-09 12:59:13,723 ! ############################
2023-05-09 12:59:13,723 ! Python recognizes 'octoprint_octolapse.static.css' as an importable package,
2023-05-09 12:59:13,724 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 12:59:13,724 ! 
2023-05-09 12:59:13,724 ! 'octoprint_octolapse.static.css' has been automatically added to the distribution only
2023-05-09 12:59:13,724 ! because it may contain data files, but this behavior is likely to change
2023-05-09 12:59:13,724 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 12:59:13,724 ! 
2023-05-09 12:59:13,725 ! Please make sure that 'octoprint_octolapse.static.css' is included as a package by using
2023-05-09 12:59:13,725 ! the `packages` configuration field or the proper discovery methods
2023-05-09 12:59:13,725 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 12:59:13,725 ! instead of `find_packages(...)`/`find:`).
2023-05-09 12:59:13,725 ! 
2023-05-09 12:59:13,726 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 12:59:13,726 ! documentation page.
2023-05-09 12:59:13,726 ! 
2023-05-09 12:59:13,726 ! 
2023-05-09 12:59:13,726 ! !!
2023-05-09 12:59:13,726 ! 
2023-05-09 12:59:13,727 ! check.warn(importable)
2023-05-09 12:59:13,727 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.docs.help' as data is deprecated, please list it in `packages`.
2023-05-09 12:59:13,727 ! !!
2023-05-09 12:59:13,727 ! 
2023-05-09 12:59:13,727 ! 
2023-05-09 12:59:13,727 ! ############################
2023-05-09 12:59:13,728 ! # Package would be ignored #
2023-05-09 12:59:13,728 ! ############################
2023-05-09 12:59:13,728 ! Python recognizes 'octoprint_octolapse.static.docs.help' as an importable package,
2023-05-09 12:59:13,728 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 12:59:13,728 ! 
2023-05-09 12:59:13,729 ! 'octoprint_octolapse.static.docs.help' has been automatically added to the distribution only
2023-05-09 12:59:13,729 ! because it may contain data files, but this behavior is likely to change
2023-05-09 12:59:13,729 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 12:59:13,729 ! 
2023-05-09 12:59:13,729 ! Please make sure that 'octoprint_octolapse.static.docs.help' is included as a package by using
2023-05-09 12:59:13,729 ! the `packages` configuration field or the proper discovery methods
2023-05-09 12:59:13,730 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 12:59:13,730 ! instead of `find_packages(...)`/`find:`).
2023-05-09 12:59:13,730 ! 
2023-05-09 12:59:13,730 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 12:59:13,730 ! documentation page.
2023-05-09 12:59:13,730 ! 
2023-05-09 12:59:13,731 ! 
2023-05-09 12:59:13,731 ! !!
2023-05-09 12:59:13,731 ! 
2023-05-09 12:59:13,731 ! check.warn(importable)
2023-05-09 12:59:13,731 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.img' as data is deprecated, please list it in `packages`.
2023-05-09 12:59:13,731 ! !!
2023-05-09 12:59:13,732 ! 
2023-05-09 12:59:13,732 ! 
2023-05-09 12:59:13,732 ! ############################
2023-05-09 12:59:13,732 ! # Package would be ignored #
2023-05-09 12:59:13,732 ! ############################
2023-05-09 12:59:13,733 ! Python recognizes 'octoprint_octolapse.static.img' as an importable package,
2023-05-09 12:59:13,733 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 12:59:13,733 ! 
2023-05-09 12:59:13,733 ! 'octoprint_octolapse.static.img' has been automatically added to the distribution only
2023-05-09 12:59:13,733 ! because it may contain data files, but this behavior is likely to change
2023-05-09 12:59:13,733 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 12:59:13,734 ! 
2023-05-09 12:59:13,734 ! Please make sure that 'octoprint_octolapse.static.img' is included as a package by using
2023-05-09 12:59:13,734 ! the `packages` configuration field or the proper discovery methods
2023-05-09 12:59:13,734 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 12:59:13,734 ! instead of `find_packages(...)`/`find:`).
2023-05-09 12:59:13,734 ! 
2023-05-09 12:59:13,735 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 12:59:13,735 ! documentation page.
2023-05-09 12:59:13,735 ! 
2023-05-09 12:59:13,735 ! 
2023-05-09 12:59:13,735 ! !!
2023-05-09 12:59:13,735 ! 
2023-05-09 12:59:13,736 ! check.warn(importable)
2023-05-09 12:59:13,736 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.js' as data is deprecated, please list it in `packages`.
2023-05-09 12:59:13,736 ! !!
2023-05-09 12:59:13,736 ! 
2023-05-09 12:59:13,736 ! 
2023-05-09 12:59:13,737 ! ############################
2023-05-09 12:59:13,737 ! # Package would be ignored #
2023-05-09 12:59:13,737 ! ############################
2023-05-09 12:59:13,737 ! Python recognizes 'octoprint_octolapse.static.js' as an importable package,
2023-05-09 12:59:13,737 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 12:59:13,737 ! 
2023-05-09 12:59:13,738 ! 'octoprint_octolapse.static.js' has been automatically added to the distribution only
2023-05-09 12:59:13,738 ! because it may contain data files, but this behavior is likely to change
2023-05-09 12:59:13,738 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 12:59:13,738 ! 
2023-05-09 12:59:13,738 ! Please make sure that 'octoprint_octolapse.static.js' is included as a package by using
2023-05-09 12:59:13,738 ! the `packages` configuration field or the proper discovery methods
2023-05-09 12:59:13,739 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 12:59:13,739 ! instead of `find_packages(...)`/`find:`).
2023-05-09 12:59:13,739 ! 
2023-05-09 12:59:13,739 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 12:59:13,739 ! documentation page.
2023-05-09 12:59:13,740 ! 
2023-05-09 12:59:13,740 ! 
2023-05-09 12:59:13,740 ! !!
2023-05-09 12:59:13,740 ! 
2023-05-09 12:59:13,740 ! check.warn(importable)
2023-05-09 12:59:13,740 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.js.webcams.mjpg_streamer' as data is deprecated, please list it in `packages`.
2023-05-09 12:59:13,741 ! !!
2023-05-09 12:59:13,741 ! 
2023-05-09 12:59:13,741 ! 
2023-05-09 12:59:13,741 ! ############################
2023-05-09 12:59:13,741 ! # Package would be ignored #
2023-05-09 12:59:13,741 ! ############################
2023-05-09 12:59:13,742 ! Python recognizes 'octoprint_octolapse.static.js.webcams.mjpg_streamer' as an importable package,
2023-05-09 12:59:13,742 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 12:59:13,742 ! 
2023-05-09 12:59:13,742 ! 'octoprint_octolapse.static.js.webcams.mjpg_streamer' has been automatically added to the distribution only
2023-05-09 12:59:13,742 ! because it may contain data files, but this behavior is likely to change
2023-05-09 12:59:13,742 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 12:59:13,743 ! 
2023-05-09 12:59:13,743 ! Please make sure that 'octoprint_octolapse.static.js.webcams.mjpg_streamer' is included as a package by using
2023-05-09 12:59:13,743 ! the `packages` configuration field or the proper discovery methods
2023-05-09 12:59:13,743 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 12:59:13,743 ! instead of `find_packages(...)`/`find:`).
2023-05-09 12:59:13,744 ! 
2023-05-09 12:59:13,744 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 12:59:13,744 ! documentation page.
2023-05-09 12:59:13,744 ! 
2023-05-09 12:59:13,744 ! 
2023-05-09 12:59:13,744 ! !!
2023-05-09 12:59:13,745 ! 
2023-05-09 12:59:13,745 ! check.warn(importable)
2023-05-09 12:59:13,745 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.templates' as data is deprecated, please list it in `packages`.
2023-05-09 12:59:13,745 ! !!
2023-05-09 12:59:13,745 ! 
2023-05-09 12:59:13,746 ! 
2023-05-09 12:59:13,746 ! ############################
2023-05-09 12:59:13,746 ! # Package would be ignored #
2023-05-09 12:59:13,746 ! ############################
2023-05-09 12:59:13,746 ! Python recognizes 'octoprint_octolapse.templates' as an importable package,
2023-05-09 12:59:13,746 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 12:59:13,747 ! 
2023-05-09 12:59:13,747 ! 'octoprint_octolapse.templates' has been automatically added to the distribution only
2023-05-09 12:59:13,747 ! because it may contain data files, but this behavior is likely to change
2023-05-09 12:59:13,747 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 12:59:13,747 ! 
2023-05-09 12:59:13,747 ! Please make sure that 'octoprint_octolapse.templates' is included as a package by using
2023-05-09 12:59:13,748 ! the `packages` configuration field or the proper discovery methods
2023-05-09 12:59:13,748 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 12:59:13,748 ! instead of `find_packages(...)`/`find:`).
2023-05-09 12:59:13,748 ! 
2023-05-09 12:59:13,748 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 12:59:13,748 ! documentation page.
2023-05-09 12:59:13,749 ! 
2023-05-09 12:59:13,749 ! 
2023-05-09 12:59:13,749 ! !!
2023-05-09 12:59:13,749 ! 
2023-05-09 12:59:13,749 ! check.warn(importable)
2023-05-09 12:59:13,750 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.templates.webcams.mjpg_streamer' as data is deprecated, please list it in `packages`.
2023-05-09 12:59:13,750 ! !!
2023-05-09 12:59:13,750 ! 
2023-05-09 12:59:13,750 ! 
2023-05-09 12:59:13,750 ! ############################
2023-05-09 12:59:13,750 ! # Package would be ignored #
2023-05-09 12:59:13,751 ! ############################
2023-05-09 12:59:13,751 ! Python recognizes 'octoprint_octolapse.templates.webcams.mjpg_streamer' as an importable package,
2023-05-09 12:59:13,751 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 12:59:13,751 ! 
2023-05-09 12:59:13,751 ! 'octoprint_octolapse.templates.webcams.mjpg_streamer' has been automatically added to the distribution only
2023-05-09 12:59:13,751 ! because it may contain data files, but this behavior is likely to change
2023-05-09 12:59:13,752 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 12:59:13,752 ! 
2023-05-09 12:59:13,752 ! Please make sure that 'octoprint_octolapse.templates.webcams.mjpg_streamer' is included as a package by using
2023-05-09 12:59:13,752 ! the `packages` configuration field or the proper discovery methods
2023-05-09 12:59:13,752 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 12:59:13,753 ! instead of `find_packages(...)`/`find:`).
2023-05-09 12:59:13,753 ! 
2023-05-09 12:59:13,753 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 12:59:13,753 ! documentation page.
2023-05-09 12:59:13,753 ! 
2023-05-09 12:59:13,753 ! 
2023-05-09 12:59:13,754 ! !!
2023-05-09 12:59:13,754 ! 
2023-05-09 12:59:13,754 ! check.warn(importable)
2023-05-09 12:59:13,754 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 12:59:13,754 ! copying octoprint_octolapse/data/settings_default_0.3.3rc3.dev0.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 12:59:13,755 ! copying octoprint_octolapse/data/settings_default_0.4.0.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 12:59:13,755 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev0.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 12:59:13,755 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev2.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 12:59:13,755 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev3.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 12:59:13,755 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev4.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 12:59:13,755 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev5.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 12:59:13,756 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 12:59:13,756 ! copying octoprint_octolapse/data/settings_default_0.4.0rc2.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 12:59:13,756 ! copying octoprint_octolapse/data/settings_default_0.4.0rc3.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 12:59:13,756 ! copying octoprint_octolapse/data/settings_default_current.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 12:59:13,756 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 12:59:13,756 ! copying octoprint_octolapse/data/Images/no-camera-selected.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 12:59:13,757 ! copying octoprint_octolapse/data/Images/no-image-available.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 12:59:13,757 ! copying octoprint_octolapse/data/Images/no_snapshot.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 12:59:13,757 ! copying octoprint_octolapse/data/Images/test-snapshot-image.jpg -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 12:59:13,757 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/fonts
2023-05-09 12:59:13,757 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/fonts/DejaVu
2023-05-09 12:59:13,758 ! copying octoprint_octolapse/data/fonts/DejaVu/DejaVuSansMono.ttf -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/fonts/DejaVu
2023-05-09 12:59:13,758 ! copying octoprint_octolapse/data/fonts/DejaVu/license.txt -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/fonts/DejaVu
2023-05-09 12:59:13,758 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib
2023-05-09 12:59:13,758 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:59:13,758 ! copying octoprint_octolapse/data/lib/c/extruder.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:59:13,758 ! copying octoprint_octolapse/data/lib/c/extruder.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:59:13,759 ! copying octoprint_octolapse/data/lib/c/gcode_comment_processor.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:59:13,759 ! copying octoprint_octolapse/data/lib/c/gcode_comment_processor.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:59:13,759 ! copying octoprint_octolapse/data/lib/c/gcode_parser.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:59:13,759 ! copying octoprint_octolapse/data/lib/c/gcode_parser.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:59:13,759 ! copying octoprint_octolapse/data/lib/c/gcode_position.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:59:13,759 ! copying octoprint_octolapse/data/lib/c/gcode_position.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:59:13,760 ! copying octoprint_octolapse/data/lib/c/gcode_position_processor.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:59:13,760 ! copying octoprint_octolapse/data/lib/c/gcode_position_processor.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:59:13,760 ! copying octoprint_octolapse/data/lib/c/logging.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:59:13,760 ! copying octoprint_octolapse/data/lib/c/logging.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:59:13,760 ! copying octoprint_octolapse/data/lib/c/parsed_command.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:59:13,761 ! copying octoprint_octolapse/data/lib/c/parsed_command.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:59:13,761 ! copying octoprint_octolapse/data/lib/c/parsed_command_parameter.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:59:13,761 ! copying octoprint_octolapse/data/lib/c/parsed_command_parameter.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:59:13,761 ! copying octoprint_octolapse/data/lib/c/position.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:59:13,761 ! copying octoprint_octolapse/data/lib/c/position.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:59:13,761 ! copying octoprint_octolapse/data/lib/c/python_helpers.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:59:13,762 ! copying octoprint_octolapse/data/lib/c/python_helpers.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:59:13,762 ! copying octoprint_octolapse/data/lib/c/snapshot_plan.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:59:13,762 ! copying octoprint_octolapse/data/lib/c/snapshot_plan.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:59:13,762 ! copying octoprint_octolapse/data/lib/c/snapshot_plan_step.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:59:13,762 ! copying octoprint_octolapse/data/lib/c/snapshot_plan_step.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:59:13,762 ! copying octoprint_octolapse/data/lib/c/stabilization.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:59:13,763 ! copying octoprint_octolapse/data/lib/c/stabilization.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:59:13,763 ! copying octoprint_octolapse/data/lib/c/stabilization_results.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:59:13,763 ! copying octoprint_octolapse/data/lib/c/stabilization_results.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:59:13,763 ! copying octoprint_octolapse/data/lib/c/stabilization_smart_gcode.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:59:13,763 ! copying octoprint_octolapse/data/lib/c/stabilization_smart_gcode.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:59:13,763 ! copying octoprint_octolapse/data/lib/c/stabilization_smart_layer.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:59:13,764 ! copying octoprint_octolapse/data/lib/c/stabilization_smart_layer.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:59:13,764 ! copying octoprint_octolapse/data/lib/c/stabilization_snap_to_print.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:59:13,764 ! copying octoprint_octolapse/data/lib/c/stabilization_snap_to_print.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:59:13,764 ! copying octoprint_octolapse/data/lib/c/trigger_position.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:59:13,765 ! copying octoprint_octolapse/data/lib/c/trigger_position.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:59:13,765 ! copying octoprint_octolapse/data/lib/c/utilities.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:59:13,765 ! copying octoprint_octolapse/data/lib/c/utilities.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:59:13,765 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts
2023-05-09 12:59:13,765 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode
2023-05-09 12:59:13,765 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 12:59:13,765 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 12:59:13,766 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_02_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 12:59:13,766 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_03_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 12:59:13,766 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_04_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 12:59:13,766 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_05_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 12:59:13,766 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_06_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 12:59:13,766 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_07_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 12:59:13,767 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_08_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 12:59:13,767 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 12:59:13,767 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 12:59:13,767 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_02_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 12:59:13,767 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_03_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 12:59:13,767 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_04_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 12:59:13,767 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_05_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 12:59:13,768 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_06_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 12:59:13,768 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_07_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 12:59:13,768 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_08_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 12:59:13,768 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 12:59:13,768 ! copying octoprint_octolapse/data/scripts/linux/capture_image_leave_on_camera.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 12:59:13,768 ! copying octoprint_octolapse/data/scripts/linux/download-from-camera-and-rename.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 12:59:13,769 ! copying octoprint_octolapse/data/scripts/linux/initialize_dslr.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 12:59:13,769 ! copying octoprint_octolapse/data/scripts/linux/move_snapshots_to_target.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 12:59:13,769 ! copying octoprint_octolapse/data/scripts/linux/take_snapshot_and_download.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 12:59:13,769 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/windows
2023-05-09 12:59:13,769 ! copying octoprint_octolapse/data/scripts/windows/take_snapshot_and_download.bat -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/windows
2023-05-09 12:59:13,769 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/templates
2023-05-09 12:59:13,770 ! copying octoprint_octolapse/data/templates/cura_gcode_settings_template.txt -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/templates
2023-05-09 12:59:13,770 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types
2023-05-09 12:59:13,770 ! copying octoprint_octolapse/data/webcam_types/camera_types.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types
2023-05-09 12:59:13,770 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 12:59:13,770 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/logitech_c250.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 12:59:13,770 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/logitech_c920.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 12:59:13,770 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/logitech_c920_2.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 12:59:13,771 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/logitech_c920_3.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 12:59:13,771 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/raspi_cam_v2.1.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 12:59:13,771 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/raspi_cam_v2.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 12:59:13,771 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static
2023-05-09 12:59:13,771 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/css
2023-05-09 12:59:13,771 ! copying octoprint_octolapse/static/css/jquery.minicolors.css -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/css
2023-05-09 12:59:13,771 ! copying octoprint_octolapse/static/css/jquery.minicolors.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/css
2023-05-09 12:59:13,772 ! copying octoprint_octolapse/static/css/octolapse.css -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/css
2023-05-09 12:59:13,772 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs
2023-05-09 12:59:13,772 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,772 ! copying octoprint_octolapse/static/docs/help/dialog.renderings.in_process.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,772 ! copying octoprint_octolapse/static/docs/help/dialog.renderings.unfinished.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,772 ! copying octoprint_octolapse/static/docs/help/dialog.timelapse_files.snapshot_archive.import.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,773 ! copying octoprint_octolapse/static/docs/help/dialog.timelapse_files.snapshot_archive.tab.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,773 ! copying octoprint_octolapse/static/docs/help/dialog.timelapse_files.timelapse.tab.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,773 ! copying octoprint_octolapse/static/docs/help/error_help_error_not_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,773 ! copying octoprint_octolapse/static/docs/help/error_help_init_automatic_slicer_no_settings_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,773 ! copying octoprint_octolapse/static/docs/help/error_help_init_automatic_slicer_settings_missing.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,773 ! copying octoprint_octolapse/static/docs/help/error_help_init_before_print_start_camera_script_apply_failed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,774 ! copying octoprint_octolapse/static/docs/help/error_help_init_camera_init_test_failed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,774 ! copying octoprint_octolapse/static/docs/help/error_help_init_camera_settings_apply_failed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,774 ! copying octoprint_octolapse/static/docs/help/error_help_init_cant_print_from_sd.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,774 ! copying octoprint_octolapse/static/docs/help/error_help_init_directory_test_failed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,774 ! copying octoprint_octolapse/static/docs/help/error_help_init_ffmpeg_not_found_at_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,774 ! copying octoprint_octolapse/static/docs/help/error_help_init_ffmpeg_path_not_set.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,774 ! copying octoprint_octolapse/static/docs/help/error_help_init_ffmpeg_path_retrieve_exception.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,775 ! copying octoprint_octolapse/static/docs/help/error_help_init_incorrect_octoprint_version.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,775 ! copying octoprint_octolapse/static/docs/help/error_help_init_incorrect_print_start_state.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,775 ! copying octoprint_octolapse/static/docs/help/error_help_init_m114_not_supported.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,775 ! copying octoprint_octolapse/static/docs/help/error_help_init_manual_slicer_settings_missing.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,775 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_current_job_data_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,775 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_current_job_file_data_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,776 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_enabled_cameras.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,776 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_gcode_filepath_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,776 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_printer_profile_exists.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,776 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_printer_profile_selected.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,776 ! copying octoprint_octolapse/static/docs/help/error_help_init_octolapse_is_disabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,776 ! copying octoprint_octolapse/static/docs/help/error_help_init_overlay_font_path_not_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,776 ! copying octoprint_octolapse/static/docs/help/error_help_init_printer_not_configured.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,777 ! copying octoprint_octolapse/static/docs/help/error_help_init_rendering_file_template_invalid.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,777 ! copying octoprint_octolapse/static/docs/help/error_help_init_timelapse_start_exception.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,777 ! copying octoprint_octolapse/static/docs/help/error_help_init_too_few_extruders_defined.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,777 ! copying octoprint_octolapse/static/docs/help/error_help_init_too_few_extruders_offsets_defined.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,777 ! copying octoprint_octolapse/static/docs/help/error_help_init_unable_to_accept_snapshot_plan.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,777 ! copying octoprint_octolapse/static/docs/help/error_help_init_unexpected_exception.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,778 ! copying octoprint_octolapse/static/docs/help/error_help_init_unknown_file_origin.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,778 ! copying octoprint_octolapse/static/docs/help/error_help_not_a_valid_error_dict.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,778 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_axis_mode_e_unknown.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,778 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_axis_mode_xyz_unknown.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,778 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_incorrect_trigger_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,778 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_no_definite_position.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,779 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_no_metric_units.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,779 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_no_snapshot_commands_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,779 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_no_snapshot_plans_returned.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,779 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_printer_not_primed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,779 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_unhandled_exception.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,779 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_unknown_trigger_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,779 ! copying octoprint_octolapse/static/docs/help/error_help_rendering_archive_import_no_files_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,780 ! copying octoprint_octolapse/static/docs/help/error_help_rendering_archive_import_zip_file_corrupt.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,780 ! copying octoprint_octolapse/static/docs/help/error_help_rendering_archive_import_zip_file_too_large.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,780 ! copying octoprint_octolapse/static/docs/help/error_help_settings_slicer_simplify3d_duplicate_toolhead_numbers.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,780 ! copying octoprint_octolapse/static/docs/help/error_help_settings_slicer_simplify3d_extruder_count_mismatch.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,780 ! copying octoprint_octolapse/static/docs/help/error_help_settings_slicer_simplify3d_max_extruder_count_exceeded.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,780 ! copying octoprint_octolapse/static/docs/help/error_help_settings_slicer_simplify3d_unexpected_max_toolhead_number.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,781 ! copying octoprint_octolapse/static/docs/help/error_help_timelapse_cannot_aquire_job_lock.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,781 ! copying octoprint_octolapse/static/docs/help/main_settings.auto_reload_frames.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,781 ! copying octoprint_octolapse/static/docs/help/main_settings.auto_reload_latest_snapshot.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,781 ! copying octoprint_octolapse/static/docs/help/main_settings.automatic_update_interval_days.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,781 ! copying octoprint_octolapse/static/docs/help/main_settings.automatic_updates_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,781 ! copying octoprint_octolapse/static/docs/help/main_settings.cancel_print_on_startup_error.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,781 ! copying octoprint_octolapse/static/docs/help/main_settings.enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,782 ! copying octoprint_octolapse/static/docs/help/main_settings.is_test_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,782 ! copying octoprint_octolapse/static/docs/help/main_settings.preview_snapshot_plan_autoclose.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,782 ! copying octoprint_octolapse/static/docs/help/main_settings.preview_snapshot_plan_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,782 ! copying octoprint_octolapse/static/docs/help/main_settings.preview_snapshot_plans.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,782 ! copying octoprint_octolapse/static/docs/help/main_settings.show_extruder_state_changes.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,782 ! copying octoprint_octolapse/static/docs/help/main_settings.show_navbar_icon.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,782 ! copying octoprint_octolapse/static/docs/help/main_settings.show_navbar_when_not_printing.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,783 ! copying octoprint_octolapse/static/docs/help/main_settings.show_position_changes.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,783 ! copying octoprint_octolapse/static/docs/help/main_settings.show_printer_state_changes.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,783 ! copying octoprint_octolapse/static/docs/help/main_settings.show_snapshot_plan_information.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,783 ! copying octoprint_octolapse/static/docs/help/main_settings.show_trigger_state_changes.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,783 ! copying octoprint_octolapse/static/docs/help/main_settings.snapshot_archive_directory.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,783 ! copying octoprint_octolapse/static/docs/help/main_settings.temporary_directory.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,784 ! copying octoprint_octolapse/static/docs/help/main_settings.timelapse_directory.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,784 ! copying octoprint_octolapse/static/docs/help/profiles.camera.apply_settings_at_startup.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,784 ! copying octoprint_octolapse/static/docs/help/profiles.camera.apply_settings_before_print.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,784 ! copying octoprint_octolapse/static/docs/help/profiles.camera.apply_settings_when_disabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,784 ! copying octoprint_octolapse/static/docs/help/profiles.camera.camera_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,784 ! copying octoprint_octolapse/static/docs/help/profiles.camera.delay.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,785 ! copying octoprint_octolapse/static/docs/help/profiles.camera.edit_cutsom_image_preferences.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,785 ! copying octoprint_octolapse/static/docs/help/profiles.camera.external_camera_snapshot_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,785 ! copying octoprint_octolapse/static/docs/help/profiles.camera.gcode_camera_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,785 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_after_render_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,785 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_after_snapshot_gcode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,785 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_after_snapshot_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,785 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_before_render_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,786 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_before_snapshot_gcode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,786 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_before_snapshot_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,786 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_print_end_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,786 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_print_start_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,786 ! copying octoprint_octolapse/static/docs/help/profiles.camera.snapshot_transpose.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,786 ! copying octoprint_octolapse/static/docs/help/profiles.camera.stream_template.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,786 ! copying octoprint_octolapse/static/docs/help/profiles.camera.timeout_ms.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,787 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.address.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,787 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.enable_custom_image_preferences.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,787 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.ignore_ssl_error.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,787 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.1.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,787 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029518.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,787 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029519.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,788 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029538.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,788 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029670.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,788 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029671.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,788 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029675.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,788 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094849.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,788 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094850.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,788 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094851.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,789 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094856.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,789 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094857.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,789 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094858.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,789 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094860.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,789 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094861.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,789 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094867.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,790 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094868.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,790 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094870.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,790 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094871.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,790 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094872.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,790 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094873.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,790 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094874.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,790 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10291459.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,791 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963776.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,791 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963777.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,791 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963778.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,791 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963788.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,791 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963790.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,791 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963791.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,792 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963795.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,792 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963796.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,792 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963797.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,792 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963800.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,792 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963802.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,792 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963803.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,793 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963804.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,793 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963807.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,793 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963810.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,793 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963818.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,793 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.password.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,793 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.snapshot_request_template.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,793 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.stream_download.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,794 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.username.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,794 ! copying octoprint_octolapse/static/docs/help/profiles.library.is_custom.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,794 ! copying octoprint_octolapse/static/docs/help/profiles.logging.enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,794 ! copying octoprint_octolapse/static/docs/help/profiles.logging.log_all_errors.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,794 ! copying octoprint_octolapse/static/docs/help/profiles.logging.log_to_console.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,794 ! copying octoprint_octolapse/static/docs/help/profiles.logging.logging_level.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,795 ! copying octoprint_octolapse/static/docs/help/profiles.logging.manage_log_files.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,795 ! copying octoprint_octolapse/static/docs/help/profiles.logging.modules_to_log.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,795 ! copying octoprint_octolapse/static/docs/help/profiles.printer.auto_detect_position.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,795 ! copying octoprint_octolapse/static/docs/help/profiles.printer.auto_position_detection_commands.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,795 ! copying octoprint_octolapse/static/docs/help/profiles.printer.automatic_configuration.is_automatic.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,795 ! copying octoprint_octolapse/static/docs/help/profiles.printer.automatic_configuration.make.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,795 ! copying octoprint_octolapse/static/docs/help/profiles.printer.automatic_configuration.model.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,796 ! copying octoprint_octolapse/static/docs/help/profiles.printer.bed_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,796 ! copying octoprint_octolapse/static/docs/help/profiles.printer.custom_bounding_box.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,796 ! copying octoprint_octolapse/static/docs/help/profiles.printer.default_extruder.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,796 ! copying octoprint_octolapse/static/docs/help/profiles.printer.default_firmware_retractions.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,796 ! copying octoprint_octolapse/static/docs/help/profiles.printer.default_firmware_retractions_zhop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,796 ! copying octoprint_octolapse/static/docs/help/profiles.printer.e_axis_default_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,797 ! copying octoprint_octolapse/static/docs/help/profiles.printer.extruder_offsets.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,797 ! copying octoprint_octolapse/static/docs/help/profiles.printer.g90_influences_extruder.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,797 ! copying octoprint_octolapse/static/docs/help/profiles.printer.gocde_axis_compatibility_mode_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,797 ! copying octoprint_octolapse/static/docs/help/profiles.printer.home_axis_gcode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,797 ! copying octoprint_octolapse/static/docs/help/profiles.printer.invert_e.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,797 ! copying octoprint_octolapse/static/docs/help/profiles.printer.invert_x.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,798 ! copying octoprint_octolapse/static/docs/help/profiles.printer.invert_y.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,798 ! copying octoprint_octolapse/static/docs/help/profiles.printer.invert_z.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,798 ! copying octoprint_octolapse/static/docs/help/profiles.printer.minimum_layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,798 ! copying octoprint_octolapse/static/docs/help/profiles.printer.num_extruders.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,798 ! copying octoprint_octolapse/static/docs/help/profiles.printer.origin_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,798 ! copying octoprint_octolapse/static/docs/help/profiles.printer.override_octoprint_profile_settings.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,798 ! copying octoprint_octolapse/static/docs/help/profiles.printer.priming_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,799 ! copying octoprint_octolapse/static/docs/help/profiles.printer.restrict_snapshot_area.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,799 ! copying octoprint_octolapse/static/docs/help/profiles.printer.shared_extruder.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,799 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicer_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,799 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.automatic.continue_on_failure.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,799 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.automatic.disable_automatic_save.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,799 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.4_2.speed_z_hop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,799 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,800 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.max_feedrate_z_override.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,800 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_amount.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,800 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_enable.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,800 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_hop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,800 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_hop_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,800 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_prime_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,801 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_retract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,801 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.smooth_spiralized_contours.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,801 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.speed_travel.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,801 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.axis_speed_display_unit_options.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,801 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.deretract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,801 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,802 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.retract_before_move.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,802 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.retract_length.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,802 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.retract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,802 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.travel_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,802 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.vase_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,802 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.z_hop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,802 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.z_travel_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,803 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.extruder_use_retract.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,803 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,803 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.retraction_distance.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,803 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.retraction_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,803 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.retraction_vertical_lift.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,803 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.vase_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,804 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.x_y_axis_movement_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,804 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.z_axis_movement_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,804 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.deretract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,804 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,804 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.retract_length.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,804 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.retract_lift.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,805 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.retract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,805 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.travel_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,805 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.vase_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,805 ! copying octoprint_octolapse/static/docs/help/profiles.printer.snapshot_command.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,805 ! copying octoprint_octolapse/static/docs/help/profiles.printer.suppress_snapshot_command_always.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,805 ! copying octoprint_octolapse/static/docs/help/profiles.printer.units_default.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,805 ! copying octoprint_octolapse/static/docs/help/profiles.printer.xyz_axes_default_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,806 ! copying octoprint_octolapse/static/docs/help/profiles.printer.zero_based_extruder.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,806 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.archive_snapshots.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,806 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.bitrate.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,806 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.constant_rate_factor.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,806 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.enable_watermark.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,806 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,807 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.fps.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,807 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.fps_calculation_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,807 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.max_fps.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,807 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.min_fps.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,807 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.output_format.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,807 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.output_template.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,807 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_font_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,808 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_font_size.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,808 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_outline_color.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,808 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_outline_width.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,808 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_preview.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,808 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_alignment.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,808 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_color.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,809 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_halign.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,809 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_pos_xy.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,809 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_template.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,809 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_template_current_time.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,809 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_template_time_elapsed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,809 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_valign.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,809 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.post_roll_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,810 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.pre_roll_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,810 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.run_length_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,810 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.thread_count.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,810 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.wait_for_moves_to_finish.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,810 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_fixed_coordinate.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,810 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_fixed_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,811 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_fixed_path_invert_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,811 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_fixed_path_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,811 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_relative.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,811 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_relative_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,811 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_relative_path_invert_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,811 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_relative_path_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,811 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,812 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_fixed_coordinate.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,812 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_fixed_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,812 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_fixed_path_invert_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,812 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_fixed_path_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,812 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_relative.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,812 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_relative_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,813 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_relative_path_invert_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,813 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_relative_path_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,813 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,813 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.calculate_intersections.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,813 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.extruder_state_requirements_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,813 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.layer_trigger_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,814 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.position_restriction_shape.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,814 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.position_restriction_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,814 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.position_restrictions_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,814 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.require_zhop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,814 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.smart_layer_disable_z_lift.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,814 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.smart_layer_snap_to_print_high_quality.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,814 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.smart_layer_snap_to_print_smooth.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,815 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.smart_layer_trigger_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,815 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.timer_trigger_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,815 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.trigger_subtype.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,815 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.trigger_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,815 ! copying octoprint_octolapse/static/docs/help/quality_issues_fast_trigger.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,815 ! copying octoprint_octolapse/static/docs/help/quality_issues_low_quality_snap_to_print.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,816 ! copying octoprint_octolapse/static/docs/help/quality_issues_no_print_features_detected.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,816 ! copying octoprint_octolapse/static/docs/help/settings.import.import_method.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,816 ! copying octoprint_octolapse/static/docs/help/settings.import.import_text.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,816 ! copying octoprint_octolapse/static/docs/help/snapshot_plan_missed_snapshots.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 12:59:13,816 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/img
2023-05-09 12:59:13,816 ! copying octoprint_octolapse/static/img/watermark.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/img
2023-05-09 12:59:13,816 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:59:13,817 ! copying octoprint_octolapse/static/js/jquery.minicolors.min.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:59:13,817 ! copying octoprint_octolapse/static/js/jquery.validate.min.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:59:13,817 ! copying octoprint_octolapse/static/js/octolapse.dialog.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:59:13,817 ! copying octoprint_octolapse/static/js/octolapse.dialog.renderings.in_process.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:59:13,817 ! copying octoprint_octolapse/static/js/octolapse.dialog.renderings.unfinished.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:59:13,817 ! copying octoprint_octolapse/static/js/octolapse.dialog.timelapse_files.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:59:13,818 ! copying octoprint_octolapse/static/js/octolapse.file_browser.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:59:13,818 ! copying octoprint_octolapse/static/js/octolapse.help.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:59:13,818 ! copying octoprint_octolapse/static/js/octolapse.helpers.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:59:13,818 ! copying octoprint_octolapse/static/js/octolapse.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:59:13,818 ! copying octoprint_octolapse/static/js/octolapse.profiles.camera.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:59:13,818 ! copying octoprint_octolapse/static/js/octolapse.profiles.camera.webcam.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:59:13,818 ! copying octoprint_octolapse/static/js/octolapse.profiles.camera.webcam.mjpg_streamer.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:59:13,819 ! copying octoprint_octolapse/static/js/octolapse.profiles.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:59:13,819 ! copying octoprint_octolapse/static/js/octolapse.profiles.library.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:59:13,819 ! copying octoprint_octolapse/static/js/octolapse.profiles.logging.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:59:13,819 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:59:13,819 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.slicer.cura.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:59:13,819 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.slicer.other.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:59:13,819 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.slicer.simplify_3d.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:59:13,820 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.slicer.slic3r_pe.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:59:13,820 ! copying octoprint_octolapse/static/js/octolapse.profiles.rendering.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:59:13,820 ! copying octoprint_octolapse/static/js/octolapse.profiles.stabilization.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:59:13,820 ! copying octoprint_octolapse/static/js/octolapse.profiles.trigger.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:59:13,820 ! copying octoprint_octolapse/static/js/octolapse.settings.import.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:59:13,820 ! copying octoprint_octolapse/static/js/octolapse.settings.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:59:13,821 ! copying octoprint_octolapse/static/js/octolapse.settings.main.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:59:13,821 ! copying octoprint_octolapse/static/js/octolapse.status.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:59:13,821 ! copying octoprint_octolapse/static/js/octolapse.status.snapshotplan.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:59:13,821 ! copying octoprint_octolapse/static/js/octolapse.status.snapshotplan_preview.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:59:13,821 ! copying octoprint_octolapse/static/js/showdown.min.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 12:59:13,821 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js/webcams
2023-05-09 12:59:13,822 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js/webcams/mjpg_streamer
2023-05-09 12:59:13,822 ! copying octoprint_octolapse/static/js/webcams/mjpg_streamer/raspi_cam_v2.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js/webcams/mjpg_streamer
2023-05-09 12:59:13,822 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:59:13,822 ! copying octoprint_octolapse/templates/octolapse_dialog.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:59:13,822 ! copying octoprint_octolapse/templates/octolapse_dialog_rendering_in_process.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:59:13,822 ! copying octoprint_octolapse/templates/octolapse_dialog_rendering_unfinished.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:59:13,822 ! copying octoprint_octolapse/templates/octolapse_dialog_timelapse_files.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:59:13,823 ! copying octoprint_octolapse/templates/octolapse_file_browser.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:59:13,823 ! copying octoprint_octolapse/templates/octolapse_helpers.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:59:13,823 ! copying octoprint_octolapse/templates/octolapse_navbar.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:59:13,823 ! copying octoprint_octolapse/templates/octolapse_profile_dialog_add_edit.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:59:13,823 ! copying octoprint_octolapse/templates/octolapse_profiles.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:59:13,823 ! copying octoprint_octolapse/templates/octolapse_profiles_camera.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:59:13,824 ! copying octoprint_octolapse/templates/octolapse_profiles_camera_webcam.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:59:13,824 ! copying octoprint_octolapse/templates/octolapse_profiles_camera_webcam_mjpg_streamer.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:59:13,824 ! copying octoprint_octolapse/templates/octolapse_profiles_library.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:59:13,824 ! copying octoprint_octolapse/templates/octolapse_profiles_logging.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:59:13,824 ! copying octoprint_octolapse/templates/octolapse_profiles_printer.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:59:13,824 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_automatic.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:59:13,824 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_automatic.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:59:13,825 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_cura.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:59:13,825 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_cura_4.2.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:59:13,825 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_other.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:59:13,825 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_simplify3d.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:59:13,825 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_slic3r_pe.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:59:13,825 ! copying octoprint_octolapse/templates/octolapse_profiles_rendering.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:59:13,826 ! copying octoprint_octolapse/templates/octolapse_profiles_stabilization.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:59:13,826 ! copying octoprint_octolapse/templates/octolapse_profiles_trigger.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:59:13,826 ! copying octoprint_octolapse/templates/octolapse_settings.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:59:13,826 ! copying octoprint_octolapse/templates/octolapse_settings_import.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:59:13,826 ! copying octoprint_octolapse/templates/octolapse_settings_main.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:59:13,826 ! copying octoprint_octolapse/templates/octolapse_snapshot_plan.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:59:13,826 ! copying octoprint_octolapse/templates/octolapse_status_extruder.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:59:13,827 ! copying octoprint_octolapse/templates/octolapse_status_position.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:59:13,827 ! copying octoprint_octolapse/templates/octolapse_status_printer_state.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:59:13,827 ! copying octoprint_octolapse/templates/octolapse_status_snapshot_plan.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:59:13,827 ! copying octoprint_octolapse/templates/octolapse_status_triggers.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:59:13,827 ! copying octoprint_octolapse/templates/octolapse_tab.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:59:13,827 ! copying octoprint_octolapse/templates/octolapse_tab_latest_snapshot.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:59:13,828 ! copying octoprint_octolapse/templates/octolapse_tab_settings_current.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:59:13,828 ! copying octoprint_octolapse/templates/octolapse_tab_settings_current_cameras.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:59:13,828 ! copying octoprint_octolapse/templates/octolapse_tab_snapshot_plan_preview_popup.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:59:13,828 ! copying octoprint_octolapse/templates/octolapse_tab_webcam_settings_popup.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 12:59:13,828 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams
2023-05-09 12:59:13,828 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams/mjpg_streamer
2023-05-09 12:59:13,829 ! copying octoprint_octolapse/templates/webcams/mjpg_streamer/logitech_c250.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams/mjpg_streamer
2023-05-09 12:59:13,829 ! copying octoprint_octolapse/templates/webcams/mjpg_streamer/logitech_c920.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams/mjpg_streamer
2023-05-09 12:59:13,829 ! copying octoprint_octolapse/templates/webcams/mjpg_streamer/raspi_cam_v2.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams/mjpg_streamer
2023-05-09 12:59:13,829 ! UPDATING build/lib.linux-aarch64-cpython-310/octoprint_octolapse/_version.py
2023-05-09 12:59:13,829 ! set build/lib.linux-aarch64-cpython-310/octoprint_octolapse/_version.py to 'v0.4.2'
2023-05-09 12:59:13,829 ! running build_ext
2023-05-09 12:59:13,830 ! Compiling Octolapse Parser Extension with <distutils.unixccompiler.UnixCCompiler object at 0x758f8f94e0>.
2023-05-09 12:59:13,830 ! building 'GcodePositionProcessor' extension
2023-05-09 12:59:13,830 ! creating build/temp.linux-aarch64-cpython-310
2023-05-09 12:59:13,830 ! creating build/temp.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 12:59:13,830 ! creating build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 12:59:13,830 ! creating build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib
2023-05-09 12:59:13,830 ! creating build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 12:59:13,831 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/extruder.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/extruder.o -O3 -std=c++11
2023-05-09 12:59:13,831 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/gcode_comment_processor.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/gcode_comment_processor.o -O3 -std=c++11
2023-05-09 12:59:13,831 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.cpp: In member function 'void gcode_comment_processor::update_feature_from_section(position&) const':
2023-05-09 12:59:13,831 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.cpp:99:16: warning: enumeration value 'section_type_no_section' not handled in switch [-Wswitch]
2023-05-09 12:59:13,831 ! 99 |         switch (current_section_)
2023-05-09 12:59:13,831 ! |                ^
2023-05-09 12:59:13,831 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/gcode_parser.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/gcode_parser.o -O3 -std=c++11
2023-05-09 12:59:13,832 ! octoprint_octolapse/data/lib/c/gcode_parser.cpp: In member function 'bool gcode_parser::try_parse_gcode(const char*, parsed_command&)':
2023-05-09 12:59:13,832 ! octoprint_octolapse/data/lib/c/gcode_parser.cpp:148:47: warning: suggest parentheses around '&&' within '||' [-Wparentheses]
2023-05-09 12:59:13,832 ! 148 |     else if (cur_char > 32 || cur_char == ' ' && has_seen_character)
2023-05-09 12:59:13,832 ! |                               ~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:59:13,832 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/gcode_position.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/gcode_position.o -O3 -std=c++11
2023-05-09 12:59:13,832 ! octoprint_octolapse/data/lib/c/gcode_position.cpp: In member function 'void gcode_position::add_position(position&)':
2023-05-09 12:59:13,833 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:395:12: warning: operation on '((gcode_position*)this)->gcode_position::cur_pos_' may be undefined [-Wsequence-point]
2023-05-09 12:59:13,833 ! 395 |   cur_pos_ = (++cur_pos_) % NUM_POSITIONS;
2023-05-09 12:59:13,833 ! octoprint_octolapse/data/lib/c/gcode_position.cpp: In member function 'void gcode_position::add_position(parsed_command&)':
2023-05-09 12:59:13,833 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:402:12: warning: operation on '((gcode_position*)this)->gcode_position::cur_pos_' may be undefined [-Wsequence-point]
2023-05-09 12:59:13,833 ! 402 |   cur_pos_ = (++cur_pos_) % NUM_POSITIONS;
2023-05-09 12:59:13,833 ! octoprint_octolapse/data/lib/c/gcode_position.cpp: In member function 'void gcode_position::update(parsed_command&, long int, long int, long int)':
2023-05-09 12:59:13,834 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:659:31: warning: comparison of integer expressions of different signedness: 'const unsigned int' and 'int' [-Wsign-compare]
2023-05-09 12:59:13,834 ! 659 |                 if (increment > p_current_pos->height_increment && increment > 1)
2023-05-09 12:59:13,834 ! |                     ~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:59:13,834 ! octoprint_octolapse/data/lib/c/gcode_position.cpp: In member function 'void gcode_position::process_g10(position*, parsed_command&)':
2023-05-09 12:59:13,834 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:952:10: warning: variable 's' set but not used [-Wunused-but-set-variable]
2023-05-09 12:59:13,834 ! 952 |   double s = 0;
2023-05-09 12:59:13,834 ! |          ^
2023-05-09 12:59:13,835 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:953:8: warning: variable 'has_s' set but not used [-Wunused-but-set-variable]
2023-05-09 12:59:13,835 ! 953 |   bool has_s = false;
2023-05-09 12:59:13,835 ! |        ^~~~~
2023-05-09 12:59:13,835 ! In file included from octoprint_octolapse/data/lib/c/gcode_position.h:29,
2023-05-09 12:59:13,835 ! from octoprint_octolapse/data/lib/c/gcode_position.cpp:22:
2023-05-09 12:59:13,835 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h: At global scope:
2023-05-09 12:59:13,835 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:77:20: warning: 'SLICER_PE_SKIRT_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 12:59:13,836 ! 77 | static const char* SLICER_PE_SKIRT_COMMENTS[] = {"skirt", "move to first skirt point", NULL};
2023-05-09 12:59:13,836 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:59:13,836 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:73:20: warning: 'SLICER_PE_BRIDGE_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 12:59:13,836 ! 73 | static const char* SLICER_PE_BRIDGE_COMMENTS[] = {
2023-05-09 12:59:13,836 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:59:13,836 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:72:20: warning: 'SLICER_PE_GAP_FILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 12:59:13,837 ! 72 | static const char* SLICER_PE_GAP_FILL_COMMENTS[] = {"gap fill", "move to first gap fill point", NULL};
2023-05-09 12:59:13,837 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:59:13,837 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:69:20: warning: 'SLICER_PE_SOLID_INFILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 12:59:13,837 ! 69 | static const char* SLICER_PE_SOLID_INFILL_COMMENTS[] = {
2023-05-09 12:59:13,837 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:59:13,837 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:68:20: warning: 'SLICER_PE_INFILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 12:59:13,837 ! 68 | static const char* SLICER_PE_INFILL_COMMENTS[] = {"infill", "move to first infill point", NULL};
2023-05-09 12:59:13,838 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:59:13,838 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:67:20: warning: 'SLICER_PE_UNKNOWN_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 12:59:13,838 ! 67 | static const char* SLICER_PE_UNKNOWN_PERIMETER_COMMENTS[] = {"perimeter", "move to first perimeter point", NULL};
2023-05-09 12:59:13,838 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:59:13,838 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:64:20: warning: 'SLICER_PE_INNER_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 12:59:13,838 ! 64 | static const char* SLICER_PE_INNER_PERIMETER_COMMENTS[] = {
2023-05-09 12:59:13,839 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:59:13,839 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:61:20: warning: 'SLICER_PE_OUTER_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 12:59:13,839 ! 61 | static const char* SLICER_PE_OUTER_PERIMETER_COMMENTS[] = {
2023-05-09 12:59:13,839 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:59:13,839 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/gcode_position_processor.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/gcode_position_processor.o -O3 -std=c++11
2023-05-09 12:59:13,839 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:915: warning: ignoring '#pragma region location_detection_commands' [-Wunknown-pragmas]
2023-05-09 12:59:13,839 ! 915 | #pragma region location_detection_commands
2023-05-09 12:59:13,840 ! |
2023-05-09 12:59:13,840 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:955: warning: ignoring '#pragma endregion Parse' [-Wunknown-pragmas]
2023-05-09 12:59:13,840 ! 955 | #pragma endregion Parse the list of location detection commands
2023-05-09 12:59:13,840 ! |
2023-05-09 12:59:13,840 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1122: warning: ignoring '#pragma region Extract' [-Wunknown-pragmas]
2023-05-09 12:59:13,840 ! 1122 | #pragma region Extract extruder objects
2023-05-09 12:59:13,841 ! |
2023-05-09 12:59:13,841 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1219: warning: ignoring '#pragma endregion Parse' [-Wunknown-pragmas]
2023-05-09 12:59:13,841 ! 1219 | #pragma endregion Parse extruder objects
2023-05-09 12:59:13,841 ! |
2023-05-09 12:59:13,841 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1221: warning: ignoring '#pragma region Extract' [-Wunknown-pragmas]
2023-05-09 12:59:13,841 ! 1221 | #pragma region Extract firmware extruder offsets from the printer settings
2023-05-09 12:59:13,841 ! |
2023-05-09 12:59:13,842 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1334: warning: ignoring '#pragma endregion Extract' [-Wunknown-pragmas]
2023-05-09 12:59:13,842 ! 1334 | #pragma endregion Extract firmware extruder offsets from the printer settings
2023-05-09 12:59:13,842 ! |
2023-05-09 12:59:13,842 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp: In function 'int main(int, char**)':
2023-05-09 12:59:13,842 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:56:27: warning: 'void PyEval_InitThreads()' is deprecated [-Wdeprecated-declarations]
2023-05-09 12:59:13,842 ! 56 |         PyEval_InitThreads();
2023-05-09 12:59:13,842 ! |         ~~~~~~~~~~~~~~~~~~^~
2023-05-09 12:59:13,843 ! In file included from /usr/include/python3.10/Python.h:130,
2023-05-09 12:59:13,843 ! from octoprint_octolapse/data/lib/c/gcode_position_processor.h:30,
2023-05-09 12:59:13,843 ! from octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:23:
2023-05-09 12:59:13,843 ! /usr/include/python3.10/ceval.h:122:37: note: declared here
2023-05-09 12:59:13,843 ! 122 | Py_DEPRECATED(3.9) PyAPI_FUNC(void) PyEval_InitThreads(void);
2023-05-09 12:59:13,843 ! |                                     ^~~~~~~~~~~~~~~~~~
2023-05-09 12:59:13,844 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp: In function 'PyObject* Initialize(PyObject*, PyObject*)':
2023-05-09 12:59:13,844 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:371:19: warning: unused variable 'p_gcode_position' [-Wunused-variable]
2023-05-09 12:59:13,844 ! 371 |   gcode_position* p_gcode_position = NULL;
2023-05-09 12:59:13,844 ! |                   ^~~~~~~~~~~~~~~~
2023-05-09 12:59:13,844 ! In file included from /usr/include/c++/12.2.1/bits/cxxabi_init_exception.h:38,
2023-05-09 12:59:13,844 ! from /usr/include/c++/12.2.1/bits/exception_ptr.h:38,
2023-05-09 12:59:13,845 ! from /usr/include/c++/12.2.1/exception:168,
2023-05-09 12:59:13,845 ! from /usr/include/c++/12.2.1/stdexcept:38,
2023-05-09 12:59:13,845 ! from /usr/include/c++/12.2.1/system_error:41,
2023-05-09 12:59:13,845 ! from /usr/include/c++/12.2.1/bits/ios_base.h:46,
2023-05-09 12:59:13,845 ! from /usr/include/c++/12.2.1/iomanip:40,
2023-05-09 12:59:13,845 ! from octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:24:
2023-05-09 12:59:13,845 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp: In function 'bool ParseStabilizationArgs(PyObject*, stabilization_args*, PyObject**, PyObject**)':
2023-05-09 12:59:13,846 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1406:12: error: converting to 'bool' from 'std::nullptr_t' requires direct-initialization [-fpermissive]
2023-05-09 12:59:13,846 ! 1406 |     return NULL;
2023-05-09 12:59:13,846 ! |            ^~~~
2023-05-09 12:59:13,846 ! In file included from octoprint_octolapse/data/lib/c/gcode_position_processor.h:37:
2023-05-09 12:59:13,846 ! octoprint_octolapse/data/lib/c/stabilization_smart_gcode.h: At global scope:
2023-05-09 12:59:13,846 ! octoprint_octolapse/data/lib/c/stabilization_smart_gcode.h:5:20: warning: 'SMART_GCODE_STABILIZATION' defined but not used [-Wunused-variable]
2023-05-09 12:59:13,847 ! 5 | static const char* SMART_GCODE_STABILIZATION = "smart_gcode";
2023-05-09 12:59:13,847 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:59:13,847 ! In file included from octoprint_octolapse/data/lib/c/gcode_position_processor.h:36:
2023-05-09 12:59:13,847 ! octoprint_octolapse/data/lib/c/stabilization_smart_layer.h:11:20: warning: 'SMART_LAYER_STABILIZATION' defined but not used [-Wunused-variable]
2023-05-09 12:59:13,847 ! 11 | static const char* SMART_LAYER_STABILIZATION = "smart_layer";
2023-05-09 12:59:13,847 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:59:13,847 ! In file included from octoprint_octolapse/data/lib/c/gcode_position_processor.h:35:
2023-05-09 12:59:13,847 ! octoprint_octolapse/data/lib/c/stabilization.h:44:20: warning: 'send_parsed_command_never' defined but not used [-Wunused-variable]
2023-05-09 12:59:13,848 ! 44 | static const char* send_parsed_command_never = "never";
2023-05-09 12:59:13,848 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:59:13,848 ! octoprint_octolapse/data/lib/c/stabilization.h:43:20: warning: 'send_parsed_command_last' defined but not used [-Wunused-variable]
2023-05-09 12:59:13,848 ! 43 | static const char* send_parsed_command_last = "last";
2023-05-09 12:59:13,848 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:59:13,848 ! octoprint_octolapse/data/lib/c/stabilization.h:42:20: warning: 'send_parsed_command_first' defined but not used [-Wunused-variable]
2023-05-09 12:59:13,848 ! 42 | static const char* send_parsed_command_first = "first";
2023-05-09 12:59:13,848 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:59:13,849 ! octoprint_octolapse/data/lib/c/stabilization.h:41:20: warning: 'snapshot_action' defined but not used [-Wunused-variable]
2023-05-09 12:59:13,849 ! 41 | static const char* snapshot_action = "snapshot";
2023-05-09 12:59:13,849 ! |                    ^~~~~~~~~~~~~~~
2023-05-09 12:59:13,849 ! octoprint_octolapse/data/lib/c/stabilization.h:40:20: warning: 'travel_action' defined but not used [-Wunused-variable]
2023-05-09 12:59:13,849 ! 40 | static const char* travel_action = "travel";
2023-05-09 12:59:13,849 ! |                    ^~~~~~~~~~~~~
2023-05-09 12:59:13,849 ! In file included from octoprint_octolapse/data/lib/c/gcode_position.h:29,
2023-05-09 12:59:13,850 ! from octoprint_octolapse/data/lib/c/gcode_position_processor.h:33:
2023-05-09 12:59:13,850 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:77:20: warning: 'SLICER_PE_SKIRT_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 12:59:13,850 ! 77 | static const char* SLICER_PE_SKIRT_COMMENTS[] = {"skirt", "move to first skirt point", NULL};
2023-05-09 12:59:13,850 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:59:13,850 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:73:20: warning: 'SLICER_PE_BRIDGE_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 12:59:13,850 ! 73 | static const char* SLICER_PE_BRIDGE_COMMENTS[] = {
2023-05-09 12:59:13,850 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:59:13,850 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:72:20: warning: 'SLICER_PE_GAP_FILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 12:59:13,851 ! 72 | static const char* SLICER_PE_GAP_FILL_COMMENTS[] = {"gap fill", "move to first gap fill point", NULL};
2023-05-09 12:59:13,851 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:59:13,851 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:69:20: warning: 'SLICER_PE_SOLID_INFILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 12:59:13,851 ! 69 | static const char* SLICER_PE_SOLID_INFILL_COMMENTS[] = {
2023-05-09 12:59:13,851 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:59:13,851 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:68:20: warning: 'SLICER_PE_INFILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 12:59:13,851 ! 68 | static const char* SLICER_PE_INFILL_COMMENTS[] = {"infill", "move to first infill point", NULL};
2023-05-09 12:59:13,851 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:59:13,852 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:67:20: warning: 'SLICER_PE_UNKNOWN_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 12:59:13,852 ! 67 | static const char* SLICER_PE_UNKNOWN_PERIMETER_COMMENTS[] = {"perimeter", "move to first perimeter point", NULL};
2023-05-09 12:59:13,852 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:59:13,852 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:64:20: warning: 'SLICER_PE_INNER_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 12:59:13,852 ! 64 | static const char* SLICER_PE_INNER_PERIMETER_COMMENTS[] = {
2023-05-09 12:59:13,852 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:59:13,852 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:61:20: warning: 'SLICER_PE_OUTER_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 12:59:13,853 ! 61 | static const char* SLICER_PE_OUTER_PERIMETER_COMMENTS[] = {
2023-05-09 12:59:13,853 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 12:59:13,853 ! error: command '/usr/bin/gcc' failed with exit code 1
2023-05-09 12:59:13,853 ! [end of output]
2023-05-09 12:59:13,853 ! 
2023-05-09 12:59:13,853 ! note: This error originates from a subprocess, and is likely not a problem with pip.
2023-05-09 12:59:13,853 ! error: legacy-install-failure
2023-05-09 12:59:13,853 ! 
2023-05-09 12:59:13,854 ! × Encountered error while trying to install package.
2023-05-09 12:59:13,854 ! ╰─> Octolapse
2023-05-09 12:59:13,854 ! 
2023-05-09 12:59:13,854 ! note: This is an issue with the package mentioned above, not pip.
2023-05-09 12:59:13,854 ! hint: See above for output from the failure.
2023-05-09 12:59:15,376 * Looks like the plugin was already installed. Forcing a reinstall.
2023-05-09 12:59:15,402   /usr/bin/python3 -m pip --disable-pip-version-check install file:///tmp/tmp4dtoouxm/Octolapse-master.zip --no-cache-dir --ignore-installed --force-reinstall --no-deps --user
2023-05-09 12:59:23,496 > Processing /tmp/tmp4dtoouxm/Octolapse-master.zip
2023-05-09 12:59:26,544 > Preparing metadata (setup.py): started
2023-05-09 12:59:45,341 ! DEPRECATION: Octolapse is being installed using the legacy 'setup.py install' method, because it does not have a 'pyproject.toml' and the 'wheel' package is not installed. pip 23.1 will enforce this behaviour change. A possible replacement is to enable the '--use-pep517' option. Discussion can be found at https://github.com/pypa/pip/issues/8559
2023-05-09 12:59:45,846 > Preparing metadata (setup.py): finished with status 'done'
2023-05-09 12:59:45,848 > Installing collected packages: Octolapse
2023-05-09 12:59:45,850 > Running setup.py install for Octolapse: started
2023-05-09 13:00:46,002 > Running setup.py install for Octolapse: still running...
2023-05-09 13:00:49,026 > Running setup.py install for Octolapse: finished with status 'error'
2023-05-09 13:00:49,642 ! error: subprocess-exited-with-error
2023-05-09 13:00:49,644 ! 
2023-05-09 13:00:49,645 ! × Running setup.py install for Octolapse did not run successfully.
2023-05-09 13:00:49,646 ! │ exit code: 1
2023-05-09 13:00:49,647 ! ╰─> [1152 lines of output]
2023-05-09 13:00:49,649 ! likely tags: v0.4.2
2023-05-09 13:00:49,650 ! picking v0.4.2
2023-05-09 13:00:49,652 ! got version from expanded keyword {'version': 'v0.4.2', 'full-revisionid': 'c6c86782cdbfc3590fa4b1bf2e63064eb459b16b', 'dirty': False, 'error': None, 'date': '2023-04-02T10:23:21-0500'}
2023-05-09 13:00:49,655 ! Argon2 passlib backend is not available, not using it for password hashing
2023-05-09 13:00:49,656 ! /tmp/pip-req-build-k_tz3k9z/setup.py:58: DeprecationWarning: distutils Version classes are deprecated. Use packaging.version instead.
2023-05-09 13:00:49,657 ! if LooseVersion(octoprint.server.VERSION) < LooseVersion("1.4"):
2023-05-09 13:00:49,658 ! Found packages: {'octoprint_octolapse', 'octoprint_octolapse_setuptools', 'octoprint_octolapse.test'}
2023-05-09 13:00:49,659 ! running install
2023-05-09 13:00:49,660 ! /usr/lib/python3.10/site-packages/setuptools/command/install.py:34: SetuptoolsDeprecationWarning: setup.py install is deprecated. Use build and pip and other standards-based tools.
2023-05-09 13:00:49,661 ! warnings.warn(
2023-05-09 13:00:49,662 ! running build
2023-05-09 13:00:49,663 ! running build_py
2023-05-09 13:00:49,664 ! creating build
2023-05-09 13:00:49,665 ! creating build/lib.linux-aarch64-cpython-310
2023-05-09 13:00:49,666 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:00:49,667 ! copying octoprint_octolapse/snapshot.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:00:49,668 ! copying octoprint_octolapse/log.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:00:49,669 ! copying octoprint_octolapse/__init__.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:00:49,669 ! copying octoprint_octolapse/messenger_worker.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:00:49,671 ! copying octoprint_octolapse/gcode_processor.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:00:49,672 ! copying octoprint_octolapse/gcode_commands.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:00:49,673 ! copying octoprint_octolapse/camera.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:00:49,674 ! copying octoprint_octolapse/position.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:00:49,674 ! copying octoprint_octolapse/stabilization_preprocessing.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:00:49,674 ! copying octoprint_octolapse/utility.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:00:49,677 ! copying octoprint_octolapse/settings_external.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:00:49,678 ! copying octoprint_octolapse/render.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:00:49,678 ! copying octoprint_octolapse/settings_preprocessor.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:00:49,679 ! copying octoprint_octolapse/script.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:00:49,679 ! copying octoprint_octolapse/migration.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:00:49,679 ! copying octoprint_octolapse/_version.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:00:49,681 ! copying octoprint_octolapse/stabilization_gcode.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:00:49,681 ! copying octoprint_octolapse/settings.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:00:49,686 ! copying octoprint_octolapse/error_messages.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:00:49,687 ! copying octoprint_octolapse/trigger.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:00:49,687 ! copying octoprint_octolapse/timelapse.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:00:49,688 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse_setuptools
2023-05-09 13:00:49,688 ! copying octoprint_octolapse_setuptools/__init__.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse_setuptools
2023-05-09 13:00:49,689 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:00:49,689 ! copying octoprint_octolapse/test/test_settings.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:00:49,689 ! copying octoprint_octolapse/test/test_trigger_layer.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:00:49,690 ! copying octoprint_octolapse/test/__init__.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:00:49,690 ! copying octoprint_octolapse/test/test_extruder.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:00:49,690 ! copying octoprint_octolapse/test/test_parsing.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:00:49,691 ! copying octoprint_octolapse/test/test_render.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:00:49,691 ! copying octoprint_octolapse/test/test_timelapse.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:00:49,691 ! copying octoprint_octolapse/test/test_intersection.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:00:49,692 ! copying octoprint_octolapse/test/test_trigger_gcode.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:00:49,692 ! copying octoprint_octolapse/test/testing_utilities.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:00:49,692 ! copying octoprint_octolapse/test/test_octolapseplugin.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:00:49,693 ! copying octoprint_octolapse/test/test_position.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:00:49,693 ! copying octoprint_octolapse/test/test_trigger_timer.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:00:49,693 ! copying octoprint_octolapse/test/test_command.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:00:49,694 ! copying octoprint_octolapse/test/test_settings_slicer.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:00:49,694 ! copying octoprint_octolapse/test/test_utility.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:00:49,694 ! copying octoprint_octolapse/test/test_snapshotGcode.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:00:49,695 ! copying octoprint_octolapse/test/test_migration_version.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:00:49,695 ! copying octoprint_octolapse/test/test_trigger.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:00:49,695 ! running egg_info
2023-05-09 13:00:49,696 ! creating Octolapse.egg-info
2023-05-09 13:00:49,696 ! writing Octolapse.egg-info/PKG-INFO
2023-05-09 13:00:49,696 ! writing dependency_links to Octolapse.egg-info/dependency_links.txt
2023-05-09 13:00:49,697 ! writing entry points to Octolapse.egg-info/entry_points.txt
2023-05-09 13:00:49,697 ! writing requirements to Octolapse.egg-info/requires.txt
2023-05-09 13:00:49,697 ! writing top-level names to Octolapse.egg-info/top_level.txt
2023-05-09 13:00:49,698 ! writing manifest file 'Octolapse.egg-info/SOURCES.txt'
2023-05-09 13:00:49,698 ! reading manifest file 'Octolapse.egg-info/SOURCES.txt'
2023-05-09 13:00:49,698 ! reading manifest template 'MANIFEST.in'
2023-05-09 13:00:49,699 ! warning: no files found matching 'README.md'
2023-05-09 13:00:49,699 ! warning: no files found matching '*' under directory 'octoprint_octolapse/translations'
2023-05-09 13:00:49,699 ! warning: no files found matching '*' under directory 'octoprint_octolapse/data/images'
2023-05-09 13:00:49,699 ! adding license file 'LICENSE'
2023-05-09 13:00:49,700 ! writing manifest file 'Octolapse.egg-info/SOURCES.txt'
2023-05-09 13:00:49,700 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data' as data is deprecated, please list it in `packages`.
2023-05-09 13:00:49,701 ! !!
2023-05-09 13:00:49,701 ! 
2023-05-09 13:00:49,701 ! 
2023-05-09 13:00:49,701 ! ############################
2023-05-09 13:00:49,702 ! # Package would be ignored #
2023-05-09 13:00:49,702 ! ############################
2023-05-09 13:00:49,702 ! Python recognizes 'octoprint_octolapse.data' as an importable package,
2023-05-09 13:00:49,703 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:00:49,703 ! 
2023-05-09 13:00:49,703 ! 'octoprint_octolapse.data' has been automatically added to the distribution only
2023-05-09 13:00:49,704 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:00:49,704 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:00:49,704 ! 
2023-05-09 13:00:49,705 ! Please make sure that 'octoprint_octolapse.data' is included as a package by using
2023-05-09 13:00:49,705 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:00:49,705 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:00:49,706 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:00:49,706 ! 
2023-05-09 13:00:49,706 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:00:49,707 ! documentation page.
2023-05-09 13:00:49,707 ! 
2023-05-09 13:00:49,707 ! 
2023-05-09 13:00:49,707 ! !!
2023-05-09 13:00:49,708 ! 
2023-05-09 13:00:49,708 ! check.warn(importable)
2023-05-09 13:00:49,708 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.Images' as data is deprecated, please list it in `packages`.
2023-05-09 13:00:49,709 ! !!
2023-05-09 13:00:49,709 ! 
2023-05-09 13:00:49,709 ! 
2023-05-09 13:00:49,710 ! ############################
2023-05-09 13:00:49,710 ! # Package would be ignored #
2023-05-09 13:00:49,710 ! ############################
2023-05-09 13:00:49,711 ! Python recognizes 'octoprint_octolapse.data.Images' as an importable package,
2023-05-09 13:00:49,711 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:00:49,711 ! 
2023-05-09 13:00:49,712 ! 'octoprint_octolapse.data.Images' has been automatically added to the distribution only
2023-05-09 13:00:49,712 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:00:49,712 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:00:49,713 ! 
2023-05-09 13:00:49,713 ! Please make sure that 'octoprint_octolapse.data.Images' is included as a package by using
2023-05-09 13:00:49,713 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:00:49,714 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:00:49,714 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:00:49,714 ! 
2023-05-09 13:00:49,714 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:00:49,715 ! documentation page.
2023-05-09 13:00:49,715 ! 
2023-05-09 13:00:49,715 ! 
2023-05-09 13:00:49,716 ! !!
2023-05-09 13:00:49,716 ! 
2023-05-09 13:00:49,716 ! check.warn(importable)
2023-05-09 13:00:49,717 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.fonts.DejaVu' as data is deprecated, please list it in `packages`.
2023-05-09 13:00:49,717 ! !!
2023-05-09 13:00:49,717 ! 
2023-05-09 13:00:49,718 ! 
2023-05-09 13:00:49,718 ! ############################
2023-05-09 13:00:49,718 ! # Package would be ignored #
2023-05-09 13:00:49,719 ! ############################
2023-05-09 13:00:49,719 ! Python recognizes 'octoprint_octolapse.data.fonts.DejaVu' as an importable package,
2023-05-09 13:00:49,719 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:00:49,720 ! 
2023-05-09 13:00:49,720 ! 'octoprint_octolapse.data.fonts.DejaVu' has been automatically added to the distribution only
2023-05-09 13:00:49,720 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:00:49,721 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:00:49,721 ! 
2023-05-09 13:00:49,721 ! Please make sure that 'octoprint_octolapse.data.fonts.DejaVu' is included as a package by using
2023-05-09 13:00:49,721 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:00:49,721 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:00:49,722 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:00:49,722 ! 
2023-05-09 13:00:49,722 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:00:49,722 ! documentation page.
2023-05-09 13:00:49,722 ! 
2023-05-09 13:00:49,723 ! 
2023-05-09 13:00:49,723 ! !!
2023-05-09 13:00:49,723 ! 
2023-05-09 13:00:49,723 ! check.warn(importable)
2023-05-09 13:00:49,723 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.lib.c' as data is deprecated, please list it in `packages`.
2023-05-09 13:00:49,724 ! !!
2023-05-09 13:00:49,724 ! 
2023-05-09 13:00:49,724 ! 
2023-05-09 13:00:49,724 ! ############################
2023-05-09 13:00:49,724 ! # Package would be ignored #
2023-05-09 13:00:49,725 ! ############################
2023-05-09 13:00:49,725 ! Python recognizes 'octoprint_octolapse.data.lib.c' as an importable package,
2023-05-09 13:00:49,725 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:00:49,725 ! 
2023-05-09 13:00:49,725 ! 'octoprint_octolapse.data.lib.c' has been automatically added to the distribution only
2023-05-09 13:00:49,726 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:00:49,726 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:00:49,726 ! 
2023-05-09 13:00:49,726 ! Please make sure that 'octoprint_octolapse.data.lib.c' is included as a package by using
2023-05-09 13:00:49,726 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:00:49,726 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:00:49,727 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:00:49,727 ! 
2023-05-09 13:00:49,727 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:00:49,728 ! documentation page.
2023-05-09 13:00:49,728 ! 
2023-05-09 13:00:49,728 ! 
2023-05-09 13:00:49,728 ! !!
2023-05-09 13:00:49,728 ! 
2023-05-09 13:00:49,729 ! check.warn(importable)
2023-05-09 13:00:49,729 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.scripts.gcode.cura' as data is deprecated, please list it in `packages`.
2023-05-09 13:00:49,729 ! !!
2023-05-09 13:00:49,729 ! 
2023-05-09 13:00:49,729 ! 
2023-05-09 13:00:49,730 ! ############################
2023-05-09 13:00:49,730 ! # Package would be ignored #
2023-05-09 13:00:49,730 ! ############################
2023-05-09 13:00:49,730 ! Python recognizes 'octoprint_octolapse.data.scripts.gcode.cura' as an importable package,
2023-05-09 13:00:49,730 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:00:49,731 ! 
2023-05-09 13:00:49,731 ! 'octoprint_octolapse.data.scripts.gcode.cura' has been automatically added to the distribution only
2023-05-09 13:00:49,731 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:00:49,731 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:00:49,731 ! 
2023-05-09 13:00:49,732 ! Please make sure that 'octoprint_octolapse.data.scripts.gcode.cura' is included as a package by using
2023-05-09 13:00:49,732 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:00:49,732 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:00:49,732 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:00:49,732 ! 
2023-05-09 13:00:49,733 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:00:49,733 ! documentation page.
2023-05-09 13:00:49,733 ! 
2023-05-09 13:00:49,733 ! 
2023-05-09 13:00:49,733 ! !!
2023-05-09 13:00:49,734 ! 
2023-05-09 13:00:49,734 ! check.warn(importable)
2023-05-09 13:00:49,734 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.scripts.linux' as data is deprecated, please list it in `packages`.
2023-05-09 13:00:49,734 ! !!
2023-05-09 13:00:49,734 ! 
2023-05-09 13:00:49,735 ! 
2023-05-09 13:00:49,735 ! ############################
2023-05-09 13:00:49,735 ! # Package would be ignored #
2023-05-09 13:00:49,735 ! ############################
2023-05-09 13:00:49,735 ! Python recognizes 'octoprint_octolapse.data.scripts.linux' as an importable package,
2023-05-09 13:00:49,736 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:00:49,736 ! 
2023-05-09 13:00:49,736 ! 'octoprint_octolapse.data.scripts.linux' has been automatically added to the distribution only
2023-05-09 13:00:49,736 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:00:49,736 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:00:49,737 ! 
2023-05-09 13:00:49,737 ! Please make sure that 'octoprint_octolapse.data.scripts.linux' is included as a package by using
2023-05-09 13:00:49,737 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:00:49,737 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:00:49,737 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:00:49,738 ! 
2023-05-09 13:00:49,738 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:00:49,738 ! documentation page.
2023-05-09 13:00:49,738 ! 
2023-05-09 13:00:49,738 ! 
2023-05-09 13:00:49,739 ! !!
2023-05-09 13:00:49,739 ! 
2023-05-09 13:00:49,739 ! check.warn(importable)
2023-05-09 13:00:49,739 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.scripts.windows' as data is deprecated, please list it in `packages`.
2023-05-09 13:00:49,739 ! !!
2023-05-09 13:00:49,739 ! 
2023-05-09 13:00:49,740 ! 
2023-05-09 13:00:49,740 ! ############################
2023-05-09 13:00:49,740 ! # Package would be ignored #
2023-05-09 13:00:49,740 ! ############################
2023-05-09 13:00:49,741 ! Python recognizes 'octoprint_octolapse.data.scripts.windows' as an importable package,
2023-05-09 13:00:49,741 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:00:49,741 ! 
2023-05-09 13:00:49,741 ! 'octoprint_octolapse.data.scripts.windows' has been automatically added to the distribution only
2023-05-09 13:00:49,741 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:00:49,741 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:00:49,742 ! 
2023-05-09 13:00:49,742 ! Please make sure that 'octoprint_octolapse.data.scripts.windows' is included as a package by using
2023-05-09 13:00:49,742 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:00:49,742 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:00:49,742 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:00:49,743 ! 
2023-05-09 13:00:49,743 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:00:49,743 ! documentation page.
2023-05-09 13:00:49,743 ! 
2023-05-09 13:00:49,743 ! 
2023-05-09 13:00:49,744 ! !!
2023-05-09 13:00:49,744 ! 
2023-05-09 13:00:49,744 ! check.warn(importable)
2023-05-09 13:00:49,744 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.templates' as data is deprecated, please list it in `packages`.
2023-05-09 13:00:49,744 ! !!
2023-05-09 13:00:49,745 ! 
2023-05-09 13:00:49,745 ! 
2023-05-09 13:00:49,745 ! ############################
2023-05-09 13:00:49,745 ! # Package would be ignored #
2023-05-09 13:00:49,745 ! ############################
2023-05-09 13:00:49,746 ! Python recognizes 'octoprint_octolapse.data.templates' as an importable package,
2023-05-09 13:00:49,746 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:00:49,746 ! 
2023-05-09 13:00:49,746 ! 'octoprint_octolapse.data.templates' has been automatically added to the distribution only
2023-05-09 13:00:49,746 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:00:49,747 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:00:49,747 ! 
2023-05-09 13:00:49,747 ! Please make sure that 'octoprint_octolapse.data.templates' is included as a package by using
2023-05-09 13:00:49,747 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:00:49,747 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:00:49,748 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:00:49,748 ! 
2023-05-09 13:00:49,748 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:00:49,748 ! documentation page.
2023-05-09 13:00:49,748 ! 
2023-05-09 13:00:49,749 ! 
2023-05-09 13:00:49,749 ! !!
2023-05-09 13:00:49,749 ! 
2023-05-09 13:00:49,749 ! check.warn(importable)
2023-05-09 13:00:49,749 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.webcam_types' as data is deprecated, please list it in `packages`.
2023-05-09 13:00:49,750 ! !!
2023-05-09 13:00:49,750 ! 
2023-05-09 13:00:49,750 ! 
2023-05-09 13:00:49,750 ! ############################
2023-05-09 13:00:49,750 ! # Package would be ignored #
2023-05-09 13:00:49,751 ! ############################
2023-05-09 13:00:49,751 ! Python recognizes 'octoprint_octolapse.data.webcam_types' as an importable package,
2023-05-09 13:00:49,751 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:00:49,751 ! 
2023-05-09 13:00:49,751 ! 'octoprint_octolapse.data.webcam_types' has been automatically added to the distribution only
2023-05-09 13:00:49,751 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:00:49,752 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:00:49,752 ! 
2023-05-09 13:00:49,752 ! Please make sure that 'octoprint_octolapse.data.webcam_types' is included as a package by using
2023-05-09 13:00:49,752 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:00:49,752 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:00:49,753 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:00:49,753 ! 
2023-05-09 13:00:49,753 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:00:49,753 ! documentation page.
2023-05-09 13:00:49,753 ! 
2023-05-09 13:00:49,754 ! 
2023-05-09 13:00:49,754 ! !!
2023-05-09 13:00:49,754 ! 
2023-05-09 13:00:49,754 ! check.warn(importable)
2023-05-09 13:00:49,755 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.webcam_types.mjpg_streamer' as data is deprecated, please list it in `packages`.
2023-05-09 13:00:49,755 ! !!
2023-05-09 13:00:49,755 ! 
2023-05-09 13:00:49,755 ! 
2023-05-09 13:00:49,755 ! ############################
2023-05-09 13:00:49,756 ! # Package would be ignored #
2023-05-09 13:00:49,756 ! ############################
2023-05-09 13:00:49,756 ! Python recognizes 'octoprint_octolapse.data.webcam_types.mjpg_streamer' as an importable package,
2023-05-09 13:00:49,756 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:00:49,756 ! 
2023-05-09 13:00:49,757 ! 'octoprint_octolapse.data.webcam_types.mjpg_streamer' has been automatically added to the distribution only
2023-05-09 13:00:49,757 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:00:49,757 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:00:49,757 ! 
2023-05-09 13:00:49,757 ! Please make sure that 'octoprint_octolapse.data.webcam_types.mjpg_streamer' is included as a package by using
2023-05-09 13:00:49,758 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:00:49,758 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:00:49,758 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:00:49,758 ! 
2023-05-09 13:00:49,758 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:00:49,758 ! documentation page.
2023-05-09 13:00:49,759 ! 
2023-05-09 13:00:49,759 ! 
2023-05-09 13:00:49,759 ! !!
2023-05-09 13:00:49,759 ! 
2023-05-09 13:00:49,759 ! check.warn(importable)
2023-05-09 13:00:49,760 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.css' as data is deprecated, please list it in `packages`.
2023-05-09 13:00:49,760 ! !!
2023-05-09 13:00:49,760 ! 
2023-05-09 13:00:49,760 ! 
2023-05-09 13:00:49,760 ! ############################
2023-05-09 13:00:49,761 ! # Package would be ignored #
2023-05-09 13:00:49,761 ! ############################
2023-05-09 13:00:49,761 ! Python recognizes 'octoprint_octolapse.static.css' as an importable package,
2023-05-09 13:00:49,761 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:00:49,761 ! 
2023-05-09 13:00:49,762 ! 'octoprint_octolapse.static.css' has been automatically added to the distribution only
2023-05-09 13:00:49,762 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:00:49,762 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:00:49,762 ! 
2023-05-09 13:00:49,762 ! Please make sure that 'octoprint_octolapse.static.css' is included as a package by using
2023-05-09 13:00:49,763 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:00:49,763 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:00:49,763 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:00:49,763 ! 
2023-05-09 13:00:49,763 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:00:49,764 ! documentation page.
2023-05-09 13:00:49,764 ! 
2023-05-09 13:00:49,764 ! 
2023-05-09 13:00:49,764 ! !!
2023-05-09 13:00:49,764 ! 
2023-05-09 13:00:49,765 ! check.warn(importable)
2023-05-09 13:00:49,765 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.docs.help' as data is deprecated, please list it in `packages`.
2023-05-09 13:00:49,765 ! !!
2023-05-09 13:00:49,765 ! 
2023-05-09 13:00:49,765 ! 
2023-05-09 13:00:49,766 ! ############################
2023-05-09 13:00:49,766 ! # Package would be ignored #
2023-05-09 13:00:49,766 ! ############################
2023-05-09 13:00:49,766 ! Python recognizes 'octoprint_octolapse.static.docs.help' as an importable package,
2023-05-09 13:00:49,766 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:00:49,767 ! 
2023-05-09 13:00:49,767 ! 'octoprint_octolapse.static.docs.help' has been automatically added to the distribution only
2023-05-09 13:00:49,767 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:00:49,767 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:00:49,767 ! 
2023-05-09 13:00:49,767 ! Please make sure that 'octoprint_octolapse.static.docs.help' is included as a package by using
2023-05-09 13:00:49,768 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:00:49,768 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:00:49,768 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:00:49,768 ! 
2023-05-09 13:00:49,768 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:00:49,769 ! documentation page.
2023-05-09 13:00:49,769 ! 
2023-05-09 13:00:49,769 ! 
2023-05-09 13:00:49,769 ! !!
2023-05-09 13:00:49,769 ! 
2023-05-09 13:00:49,770 ! check.warn(importable)
2023-05-09 13:00:49,770 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.img' as data is deprecated, please list it in `packages`.
2023-05-09 13:00:49,770 ! !!
2023-05-09 13:00:49,770 ! 
2023-05-09 13:00:49,770 ! 
2023-05-09 13:00:49,771 ! ############################
2023-05-09 13:00:49,771 ! # Package would be ignored #
2023-05-09 13:00:49,771 ! ############################
2023-05-09 13:00:49,771 ! Python recognizes 'octoprint_octolapse.static.img' as an importable package,
2023-05-09 13:00:49,771 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:00:49,772 ! 
2023-05-09 13:00:49,772 ! 'octoprint_octolapse.static.img' has been automatically added to the distribution only
2023-05-09 13:00:49,772 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:00:49,772 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:00:49,772 ! 
2023-05-09 13:00:49,773 ! Please make sure that 'octoprint_octolapse.static.img' is included as a package by using
2023-05-09 13:00:49,773 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:00:49,773 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:00:49,773 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:00:49,773 ! 
2023-05-09 13:00:49,773 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:00:49,774 ! documentation page.
2023-05-09 13:00:49,774 ! 
2023-05-09 13:00:49,774 ! 
2023-05-09 13:00:49,774 ! !!
2023-05-09 13:00:49,774 ! 
2023-05-09 13:00:49,775 ! check.warn(importable)
2023-05-09 13:00:49,775 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.js' as data is deprecated, please list it in `packages`.
2023-05-09 13:00:49,775 ! !!
2023-05-09 13:00:49,775 ! 
2023-05-09 13:00:49,775 ! 
2023-05-09 13:00:49,776 ! ############################
2023-05-09 13:00:49,776 ! # Package would be ignored #
2023-05-09 13:00:49,776 ! ############################
2023-05-09 13:00:49,776 ! Python recognizes 'octoprint_octolapse.static.js' as an importable package,
2023-05-09 13:00:49,776 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:00:49,777 ! 
2023-05-09 13:00:49,777 ! 'octoprint_octolapse.static.js' has been automatically added to the distribution only
2023-05-09 13:00:49,777 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:00:49,777 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:00:49,777 ! 
2023-05-09 13:00:49,778 ! Please make sure that 'octoprint_octolapse.static.js' is included as a package by using
2023-05-09 13:00:49,778 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:00:49,778 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:00:49,778 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:00:49,778 ! 
2023-05-09 13:00:49,779 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:00:49,779 ! documentation page.
2023-05-09 13:00:49,779 ! 
2023-05-09 13:00:49,779 ! 
2023-05-09 13:00:49,779 ! !!
2023-05-09 13:00:49,780 ! 
2023-05-09 13:00:49,780 ! check.warn(importable)
2023-05-09 13:00:49,780 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.js.webcams.mjpg_streamer' as data is deprecated, please list it in `packages`.
2023-05-09 13:00:49,780 ! !!
2023-05-09 13:00:49,780 ! 
2023-05-09 13:00:49,781 ! 
2023-05-09 13:00:49,781 ! ############################
2023-05-09 13:00:49,781 ! # Package would be ignored #
2023-05-09 13:00:49,781 ! ############################
2023-05-09 13:00:49,781 ! Python recognizes 'octoprint_octolapse.static.js.webcams.mjpg_streamer' as an importable package,
2023-05-09 13:00:49,782 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:00:49,782 ! 
2023-05-09 13:00:49,782 ! 'octoprint_octolapse.static.js.webcams.mjpg_streamer' has been automatically added to the distribution only
2023-05-09 13:00:49,782 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:00:49,782 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:00:49,782 ! 
2023-05-09 13:00:49,783 ! Please make sure that 'octoprint_octolapse.static.js.webcams.mjpg_streamer' is included as a package by using
2023-05-09 13:00:49,783 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:00:49,783 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:00:49,783 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:00:49,783 ! 
2023-05-09 13:00:49,784 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:00:49,784 ! documentation page.
2023-05-09 13:00:49,784 ! 
2023-05-09 13:00:49,784 ! 
2023-05-09 13:00:49,784 ! !!
2023-05-09 13:00:49,785 ! 
2023-05-09 13:00:49,785 ! check.warn(importable)
2023-05-09 13:00:49,785 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.templates' as data is deprecated, please list it in `packages`.
2023-05-09 13:00:49,785 ! !!
2023-05-09 13:00:49,785 ! 
2023-05-09 13:00:49,786 ! 
2023-05-09 13:00:49,786 ! ############################
2023-05-09 13:00:49,786 ! # Package would be ignored #
2023-05-09 13:00:49,786 ! ############################
2023-05-09 13:00:49,786 ! Python recognizes 'octoprint_octolapse.templates' as an importable package,
2023-05-09 13:00:49,787 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:00:49,787 ! 
2023-05-09 13:00:49,787 ! 'octoprint_octolapse.templates' has been automatically added to the distribution only
2023-05-09 13:00:49,787 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:00:49,787 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:00:49,788 ! 
2023-05-09 13:00:49,788 ! Please make sure that 'octoprint_octolapse.templates' is included as a package by using
2023-05-09 13:00:49,788 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:00:49,788 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:00:49,788 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:00:49,789 ! 
2023-05-09 13:00:49,789 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:00:49,789 ! documentation page.
2023-05-09 13:00:49,789 ! 
2023-05-09 13:00:49,789 ! 
2023-05-09 13:00:49,790 ! !!
2023-05-09 13:00:49,790 ! 
2023-05-09 13:00:49,790 ! check.warn(importable)
2023-05-09 13:00:49,790 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.templates.webcams.mjpg_streamer' as data is deprecated, please list it in `packages`.
2023-05-09 13:00:49,790 ! !!
2023-05-09 13:00:49,790 ! 
2023-05-09 13:00:49,791 ! 
2023-05-09 13:00:49,791 ! ############################
2023-05-09 13:00:49,791 ! # Package would be ignored #
2023-05-09 13:00:49,791 ! ############################
2023-05-09 13:00:49,791 ! Python recognizes 'octoprint_octolapse.templates.webcams.mjpg_streamer' as an importable package,
2023-05-09 13:00:49,792 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:00:49,792 ! 
2023-05-09 13:00:49,792 ! 'octoprint_octolapse.templates.webcams.mjpg_streamer' has been automatically added to the distribution only
2023-05-09 13:00:49,792 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:00:49,792 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:00:49,793 ! 
2023-05-09 13:00:49,793 ! Please make sure that 'octoprint_octolapse.templates.webcams.mjpg_streamer' is included as a package by using
2023-05-09 13:00:49,793 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:00:49,793 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:00:49,793 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:00:49,794 ! 
2023-05-09 13:00:49,794 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:00:49,794 ! documentation page.
2023-05-09 13:00:49,794 ! 
2023-05-09 13:00:49,794 ! 
2023-05-09 13:00:49,794 ! !!
2023-05-09 13:00:49,795 ! 
2023-05-09 13:00:49,795 ! check.warn(importable)
2023-05-09 13:00:49,795 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:00:49,795 ! copying octoprint_octolapse/data/settings_default_0.3.3rc3.dev0.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:00:49,795 ! copying octoprint_octolapse/data/settings_default_0.4.0.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:00:49,796 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev0.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:00:49,796 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev2.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:00:49,796 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev3.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:00:49,796 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev4.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:00:49,796 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev5.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:00:49,797 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:00:49,797 ! copying octoprint_octolapse/data/settings_default_0.4.0rc2.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:00:49,797 ! copying octoprint_octolapse/data/settings_default_0.4.0rc3.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:00:49,797 ! copying octoprint_octolapse/data/settings_default_current.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:00:49,797 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 13:00:49,798 ! copying octoprint_octolapse/data/Images/no-camera-selected.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 13:00:49,798 ! copying octoprint_octolapse/data/Images/no-image-available.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 13:00:49,798 ! copying octoprint_octolapse/data/Images/no_snapshot.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 13:00:49,798 ! copying octoprint_octolapse/data/Images/test-snapshot-image.jpg -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 13:00:49,798 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/fonts
2023-05-09 13:00:49,799 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/fonts/DejaVu
2023-05-09 13:00:49,799 ! copying octoprint_octolapse/data/fonts/DejaVu/DejaVuSansMono.ttf -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/fonts/DejaVu
2023-05-09 13:00:49,799 ! copying octoprint_octolapse/data/fonts/DejaVu/license.txt -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/fonts/DejaVu
2023-05-09 13:00:49,799 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib
2023-05-09 13:00:49,799 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:00:49,800 ! copying octoprint_octolapse/data/lib/c/extruder.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:00:49,800 ! copying octoprint_octolapse/data/lib/c/extruder.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:00:49,800 ! copying octoprint_octolapse/data/lib/c/gcode_comment_processor.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:00:49,800 ! copying octoprint_octolapse/data/lib/c/gcode_comment_processor.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:00:49,800 ! copying octoprint_octolapse/data/lib/c/gcode_parser.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:00:49,801 ! copying octoprint_octolapse/data/lib/c/gcode_parser.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:00:49,801 ! copying octoprint_octolapse/data/lib/c/gcode_position.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:00:49,801 ! copying octoprint_octolapse/data/lib/c/gcode_position.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:00:49,801 ! copying octoprint_octolapse/data/lib/c/gcode_position_processor.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:00:49,801 ! copying octoprint_octolapse/data/lib/c/gcode_position_processor.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:00:49,801 ! copying octoprint_octolapse/data/lib/c/logging.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:00:49,802 ! copying octoprint_octolapse/data/lib/c/logging.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:00:49,802 ! copying octoprint_octolapse/data/lib/c/parsed_command.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:00:49,802 ! copying octoprint_octolapse/data/lib/c/parsed_command.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:00:49,802 ! copying octoprint_octolapse/data/lib/c/parsed_command_parameter.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:00:49,802 ! copying octoprint_octolapse/data/lib/c/parsed_command_parameter.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:00:49,803 ! copying octoprint_octolapse/data/lib/c/position.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:00:49,803 ! copying octoprint_octolapse/data/lib/c/position.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:00:49,803 ! copying octoprint_octolapse/data/lib/c/python_helpers.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:00:49,803 ! copying octoprint_octolapse/data/lib/c/python_helpers.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:00:49,803 ! copying octoprint_octolapse/data/lib/c/snapshot_plan.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:00:49,803 ! copying octoprint_octolapse/data/lib/c/snapshot_plan.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:00:49,804 ! copying octoprint_octolapse/data/lib/c/snapshot_plan_step.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:00:49,804 ! copying octoprint_octolapse/data/lib/c/snapshot_plan_step.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:00:49,804 ! copying octoprint_octolapse/data/lib/c/stabilization.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:00:49,804 ! copying octoprint_octolapse/data/lib/c/stabilization.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:00:49,804 ! copying octoprint_octolapse/data/lib/c/stabilization_results.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:00:49,804 ! copying octoprint_octolapse/data/lib/c/stabilization_results.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:00:49,805 ! copying octoprint_octolapse/data/lib/c/stabilization_smart_gcode.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:00:49,805 ! copying octoprint_octolapse/data/lib/c/stabilization_smart_gcode.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:00:49,805 ! copying octoprint_octolapse/data/lib/c/stabilization_smart_layer.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:00:49,805 ! copying octoprint_octolapse/data/lib/c/stabilization_smart_layer.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:00:49,805 ! copying octoprint_octolapse/data/lib/c/stabilization_snap_to_print.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:00:49,805 ! copying octoprint_octolapse/data/lib/c/stabilization_snap_to_print.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:00:49,806 ! copying octoprint_octolapse/data/lib/c/trigger_position.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:00:49,806 ! copying octoprint_octolapse/data/lib/c/trigger_position.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:00:49,806 ! copying octoprint_octolapse/data/lib/c/utilities.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:00:49,806 ! copying octoprint_octolapse/data/lib/c/utilities.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:00:49,806 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts
2023-05-09 13:00:49,806 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode
2023-05-09 13:00:49,807 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:00:49,807 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:00:49,807 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_02_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:00:49,807 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_03_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:00:49,807 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_04_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:00:49,807 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_05_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:00:49,808 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_06_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:00:49,808 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_07_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:00:49,808 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_08_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:00:49,808 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:00:49,808 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:00:49,809 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_02_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:00:49,809 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_03_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:00:49,809 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_04_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:00:49,809 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_05_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:00:49,809 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_06_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:00:49,809 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_07_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:00:49,810 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_08_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:00:49,810 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:00:49,810 ! copying octoprint_octolapse/data/scripts/linux/capture_image_leave_on_camera.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:00:49,810 ! copying octoprint_octolapse/data/scripts/linux/download-from-camera-and-rename.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:00:49,810 ! copying octoprint_octolapse/data/scripts/linux/initialize_dslr.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:00:49,810 ! copying octoprint_octolapse/data/scripts/linux/move_snapshots_to_target.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:00:49,811 ! copying octoprint_octolapse/data/scripts/linux/take_snapshot_and_download.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:00:49,811 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/windows
2023-05-09 13:00:49,811 ! copying octoprint_octolapse/data/scripts/windows/take_snapshot_and_download.bat -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/windows
2023-05-09 13:00:49,811 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/templates
2023-05-09 13:00:49,811 ! copying octoprint_octolapse/data/templates/cura_gcode_settings_template.txt -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/templates
2023-05-09 13:00:49,811 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types
2023-05-09 13:00:49,812 ! copying octoprint_octolapse/data/webcam_types/camera_types.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types
2023-05-09 13:00:49,812 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:00:49,812 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/logitech_c250.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:00:49,812 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/logitech_c920.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:00:49,812 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/logitech_c920_2.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:00:49,812 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/logitech_c920_3.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:00:49,813 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/raspi_cam_v2.1.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:00:49,813 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/raspi_cam_v2.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:00:49,813 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static
2023-05-09 13:00:49,813 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/css
2023-05-09 13:00:49,813 ! copying octoprint_octolapse/static/css/jquery.minicolors.css -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/css
2023-05-09 13:00:49,813 ! copying octoprint_octolapse/static/css/jquery.minicolors.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/css
2023-05-09 13:00:49,814 ! copying octoprint_octolapse/static/css/octolapse.css -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/css
2023-05-09 13:00:49,814 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs
2023-05-09 13:00:49,814 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,814 ! copying octoprint_octolapse/static/docs/help/dialog.renderings.in_process.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,814 ! copying octoprint_octolapse/static/docs/help/dialog.renderings.unfinished.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,814 ! copying octoprint_octolapse/static/docs/help/dialog.timelapse_files.snapshot_archive.import.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,815 ! copying octoprint_octolapse/static/docs/help/dialog.timelapse_files.snapshot_archive.tab.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,815 ! copying octoprint_octolapse/static/docs/help/dialog.timelapse_files.timelapse.tab.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,815 ! copying octoprint_octolapse/static/docs/help/error_help_error_not_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,815 ! copying octoprint_octolapse/static/docs/help/error_help_init_automatic_slicer_no_settings_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,815 ! copying octoprint_octolapse/static/docs/help/error_help_init_automatic_slicer_settings_missing.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,815 ! copying octoprint_octolapse/static/docs/help/error_help_init_before_print_start_camera_script_apply_failed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,816 ! copying octoprint_octolapse/static/docs/help/error_help_init_camera_init_test_failed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,816 ! copying octoprint_octolapse/static/docs/help/error_help_init_camera_settings_apply_failed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,816 ! copying octoprint_octolapse/static/docs/help/error_help_init_cant_print_from_sd.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,816 ! copying octoprint_octolapse/static/docs/help/error_help_init_directory_test_failed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,816 ! copying octoprint_octolapse/static/docs/help/error_help_init_ffmpeg_not_found_at_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,816 ! copying octoprint_octolapse/static/docs/help/error_help_init_ffmpeg_path_not_set.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,817 ! copying octoprint_octolapse/static/docs/help/error_help_init_ffmpeg_path_retrieve_exception.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,817 ! copying octoprint_octolapse/static/docs/help/error_help_init_incorrect_octoprint_version.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,817 ! copying octoprint_octolapse/static/docs/help/error_help_init_incorrect_print_start_state.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,817 ! copying octoprint_octolapse/static/docs/help/error_help_init_m114_not_supported.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,817 ! copying octoprint_octolapse/static/docs/help/error_help_init_manual_slicer_settings_missing.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,818 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_current_job_data_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,818 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_current_job_file_data_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,818 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_enabled_cameras.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,818 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_gcode_filepath_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,818 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_printer_profile_exists.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,818 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_printer_profile_selected.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,819 ! copying octoprint_octolapse/static/docs/help/error_help_init_octolapse_is_disabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,819 ! copying octoprint_octolapse/static/docs/help/error_help_init_overlay_font_path_not_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,819 ! copying octoprint_octolapse/static/docs/help/error_help_init_printer_not_configured.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,819 ! copying octoprint_octolapse/static/docs/help/error_help_init_rendering_file_template_invalid.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,819 ! copying octoprint_octolapse/static/docs/help/error_help_init_timelapse_start_exception.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,819 ! copying octoprint_octolapse/static/docs/help/error_help_init_too_few_extruders_defined.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,820 ! copying octoprint_octolapse/static/docs/help/error_help_init_too_few_extruders_offsets_defined.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,820 ! copying octoprint_octolapse/static/docs/help/error_help_init_unable_to_accept_snapshot_plan.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,820 ! copying octoprint_octolapse/static/docs/help/error_help_init_unexpected_exception.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,820 ! copying octoprint_octolapse/static/docs/help/error_help_init_unknown_file_origin.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,820 ! copying octoprint_octolapse/static/docs/help/error_help_not_a_valid_error_dict.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,820 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_axis_mode_e_unknown.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,821 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_axis_mode_xyz_unknown.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,821 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_incorrect_trigger_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,821 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_no_definite_position.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,821 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_no_metric_units.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,821 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_no_snapshot_commands_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,821 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_no_snapshot_plans_returned.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,822 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_printer_not_primed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,822 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_unhandled_exception.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,822 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_unknown_trigger_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,822 ! copying octoprint_octolapse/static/docs/help/error_help_rendering_archive_import_no_files_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,822 ! copying octoprint_octolapse/static/docs/help/error_help_rendering_archive_import_zip_file_corrupt.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,822 ! copying octoprint_octolapse/static/docs/help/error_help_rendering_archive_import_zip_file_too_large.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,823 ! copying octoprint_octolapse/static/docs/help/error_help_settings_slicer_simplify3d_duplicate_toolhead_numbers.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,823 ! copying octoprint_octolapse/static/docs/help/error_help_settings_slicer_simplify3d_extruder_count_mismatch.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,823 ! copying octoprint_octolapse/static/docs/help/error_help_settings_slicer_simplify3d_max_extruder_count_exceeded.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,823 ! copying octoprint_octolapse/static/docs/help/error_help_settings_slicer_simplify3d_unexpected_max_toolhead_number.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,823 ! copying octoprint_octolapse/static/docs/help/error_help_timelapse_cannot_aquire_job_lock.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,823 ! copying octoprint_octolapse/static/docs/help/main_settings.auto_reload_frames.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,824 ! copying octoprint_octolapse/static/docs/help/main_settings.auto_reload_latest_snapshot.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,824 ! copying octoprint_octolapse/static/docs/help/main_settings.automatic_update_interval_days.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,824 ! copying octoprint_octolapse/static/docs/help/main_settings.automatic_updates_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,824 ! copying octoprint_octolapse/static/docs/help/main_settings.cancel_print_on_startup_error.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,824 ! copying octoprint_octolapse/static/docs/help/main_settings.enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,824 ! copying octoprint_octolapse/static/docs/help/main_settings.is_test_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,825 ! copying octoprint_octolapse/static/docs/help/main_settings.preview_snapshot_plan_autoclose.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,825 ! copying octoprint_octolapse/static/docs/help/main_settings.preview_snapshot_plan_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,825 ! copying octoprint_octolapse/static/docs/help/main_settings.preview_snapshot_plans.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,825 ! copying octoprint_octolapse/static/docs/help/main_settings.show_extruder_state_changes.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,825 ! copying octoprint_octolapse/static/docs/help/main_settings.show_navbar_icon.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,826 ! copying octoprint_octolapse/static/docs/help/main_settings.show_navbar_when_not_printing.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,826 ! copying octoprint_octolapse/static/docs/help/main_settings.show_position_changes.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,826 ! copying octoprint_octolapse/static/docs/help/main_settings.show_printer_state_changes.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,826 ! copying octoprint_octolapse/static/docs/help/main_settings.show_snapshot_plan_information.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,826 ! copying octoprint_octolapse/static/docs/help/main_settings.show_trigger_state_changes.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,826 ! copying octoprint_octolapse/static/docs/help/main_settings.snapshot_archive_directory.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,827 ! copying octoprint_octolapse/static/docs/help/main_settings.temporary_directory.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,827 ! copying octoprint_octolapse/static/docs/help/main_settings.timelapse_directory.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,827 ! copying octoprint_octolapse/static/docs/help/profiles.camera.apply_settings_at_startup.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,827 ! copying octoprint_octolapse/static/docs/help/profiles.camera.apply_settings_before_print.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,827 ! copying octoprint_octolapse/static/docs/help/profiles.camera.apply_settings_when_disabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,827 ! copying octoprint_octolapse/static/docs/help/profiles.camera.camera_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,828 ! copying octoprint_octolapse/static/docs/help/profiles.camera.delay.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,828 ! copying octoprint_octolapse/static/docs/help/profiles.camera.edit_cutsom_image_preferences.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,828 ! copying octoprint_octolapse/static/docs/help/profiles.camera.external_camera_snapshot_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,828 ! copying octoprint_octolapse/static/docs/help/profiles.camera.gcode_camera_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,828 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_after_render_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,828 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_after_snapshot_gcode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,829 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_after_snapshot_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,829 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_before_render_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,829 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_before_snapshot_gcode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,829 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_before_snapshot_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,829 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_print_end_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,829 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_print_start_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,830 ! copying octoprint_octolapse/static/docs/help/profiles.camera.snapshot_transpose.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,830 ! copying octoprint_octolapse/static/docs/help/profiles.camera.stream_template.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,830 ! copying octoprint_octolapse/static/docs/help/profiles.camera.timeout_ms.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,830 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.address.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,830 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.enable_custom_image_preferences.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,830 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.ignore_ssl_error.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,831 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.1.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,831 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029518.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,831 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029519.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,831 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029538.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,831 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029670.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,831 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029671.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,832 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029675.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,832 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094849.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,832 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094850.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,832 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094851.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,832 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094856.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,832 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094857.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,833 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094858.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,833 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094860.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,833 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094861.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,833 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094867.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,833 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094868.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,833 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094870.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,834 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094871.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,834 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094872.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,834 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094873.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,834 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094874.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,834 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10291459.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,835 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963776.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,835 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963777.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,835 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963778.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,835 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963788.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,835 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963790.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,835 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963791.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,835 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963795.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,836 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963796.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,836 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963797.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,836 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963800.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,836 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963802.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,836 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963803.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,837 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963804.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,837 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963807.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,837 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963810.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,837 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963818.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,837 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.password.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,837 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.snapshot_request_template.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,838 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.stream_download.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,838 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.username.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,838 ! copying octoprint_octolapse/static/docs/help/profiles.library.is_custom.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,838 ! copying octoprint_octolapse/static/docs/help/profiles.logging.enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,838 ! copying octoprint_octolapse/static/docs/help/profiles.logging.log_all_errors.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,838 ! copying octoprint_octolapse/static/docs/help/profiles.logging.log_to_console.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,839 ! copying octoprint_octolapse/static/docs/help/profiles.logging.logging_level.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,839 ! copying octoprint_octolapse/static/docs/help/profiles.logging.manage_log_files.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,839 ! copying octoprint_octolapse/static/docs/help/profiles.logging.modules_to_log.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,839 ! copying octoprint_octolapse/static/docs/help/profiles.printer.auto_detect_position.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,839 ! copying octoprint_octolapse/static/docs/help/profiles.printer.auto_position_detection_commands.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,839 ! copying octoprint_octolapse/static/docs/help/profiles.printer.automatic_configuration.is_automatic.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,840 ! copying octoprint_octolapse/static/docs/help/profiles.printer.automatic_configuration.make.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,840 ! copying octoprint_octolapse/static/docs/help/profiles.printer.automatic_configuration.model.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,840 ! copying octoprint_octolapse/static/docs/help/profiles.printer.bed_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,840 ! copying octoprint_octolapse/static/docs/help/profiles.printer.custom_bounding_box.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,840 ! copying octoprint_octolapse/static/docs/help/profiles.printer.default_extruder.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,840 ! copying octoprint_octolapse/static/docs/help/profiles.printer.default_firmware_retractions.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,841 ! copying octoprint_octolapse/static/docs/help/profiles.printer.default_firmware_retractions_zhop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,841 ! copying octoprint_octolapse/static/docs/help/profiles.printer.e_axis_default_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,841 ! copying octoprint_octolapse/static/docs/help/profiles.printer.extruder_offsets.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,841 ! copying octoprint_octolapse/static/docs/help/profiles.printer.g90_influences_extruder.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,841 ! copying octoprint_octolapse/static/docs/help/profiles.printer.gocde_axis_compatibility_mode_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,841 ! copying octoprint_octolapse/static/docs/help/profiles.printer.home_axis_gcode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,842 ! copying octoprint_octolapse/static/docs/help/profiles.printer.invert_e.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,842 ! copying octoprint_octolapse/static/docs/help/profiles.printer.invert_x.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,842 ! copying octoprint_octolapse/static/docs/help/profiles.printer.invert_y.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,842 ! copying octoprint_octolapse/static/docs/help/profiles.printer.invert_z.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,842 ! copying octoprint_octolapse/static/docs/help/profiles.printer.minimum_layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,842 ! copying octoprint_octolapse/static/docs/help/profiles.printer.num_extruders.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,843 ! copying octoprint_octolapse/static/docs/help/profiles.printer.origin_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,843 ! copying octoprint_octolapse/static/docs/help/profiles.printer.override_octoprint_profile_settings.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,843 ! copying octoprint_octolapse/static/docs/help/profiles.printer.priming_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,843 ! copying octoprint_octolapse/static/docs/help/profiles.printer.restrict_snapshot_area.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,843 ! copying octoprint_octolapse/static/docs/help/profiles.printer.shared_extruder.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,843 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicer_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,844 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.automatic.continue_on_failure.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,844 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.automatic.disable_automatic_save.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,844 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.4_2.speed_z_hop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,844 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,844 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.max_feedrate_z_override.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,845 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_amount.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,845 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_enable.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,845 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_hop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,845 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_hop_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,845 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_prime_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,845 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_retract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,846 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.smooth_spiralized_contours.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,846 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.speed_travel.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,846 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.axis_speed_display_unit_options.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,846 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.deretract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,846 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,846 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.retract_before_move.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,847 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.retract_length.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,847 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.retract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,847 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.travel_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,847 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.vase_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,847 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.z_hop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,847 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.z_travel_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,848 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.extruder_use_retract.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,848 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,848 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.retraction_distance.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,848 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.retraction_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,848 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.retraction_vertical_lift.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,848 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.vase_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,849 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.x_y_axis_movement_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,849 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.z_axis_movement_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,849 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.deretract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,849 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,849 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.retract_length.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,850 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.retract_lift.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,850 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.retract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,850 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.travel_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,850 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.vase_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,850 ! copying octoprint_octolapse/static/docs/help/profiles.printer.snapshot_command.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,850 ! copying octoprint_octolapse/static/docs/help/profiles.printer.suppress_snapshot_command_always.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,851 ! copying octoprint_octolapse/static/docs/help/profiles.printer.units_default.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,851 ! copying octoprint_octolapse/static/docs/help/profiles.printer.xyz_axes_default_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,851 ! copying octoprint_octolapse/static/docs/help/profiles.printer.zero_based_extruder.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,851 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.archive_snapshots.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,851 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.bitrate.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,851 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.constant_rate_factor.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,852 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.enable_watermark.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,852 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,852 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.fps.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,852 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.fps_calculation_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,852 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.max_fps.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,852 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.min_fps.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,853 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.output_format.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,853 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.output_template.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,853 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_font_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,853 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_font_size.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,853 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_outline_color.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,854 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_outline_width.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,854 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_preview.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,854 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_alignment.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,854 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_color.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,854 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_halign.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,854 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_pos_xy.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,855 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_template.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,855 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_template_current_time.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,855 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_template_time_elapsed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,855 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_valign.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,855 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.post_roll_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,855 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.pre_roll_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,856 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.run_length_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,856 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.thread_count.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,856 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.wait_for_moves_to_finish.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,856 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_fixed_coordinate.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,856 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_fixed_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,856 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_fixed_path_invert_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,857 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_fixed_path_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,857 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_relative.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,857 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_relative_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,857 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_relative_path_invert_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,857 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_relative_path_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,857 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,858 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_fixed_coordinate.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,858 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_fixed_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,858 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_fixed_path_invert_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,858 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_fixed_path_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,858 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_relative.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,858 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_relative_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,859 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_relative_path_invert_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,859 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_relative_path_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,859 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,859 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.calculate_intersections.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,859 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.extruder_state_requirements_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,859 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.layer_trigger_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,860 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.position_restriction_shape.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,860 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.position_restriction_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,860 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.position_restrictions_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,860 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.require_zhop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,860 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.smart_layer_disable_z_lift.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,861 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.smart_layer_snap_to_print_high_quality.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,861 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.smart_layer_snap_to_print_smooth.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,861 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.smart_layer_trigger_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,861 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.timer_trigger_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,861 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.trigger_subtype.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,861 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.trigger_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,862 ! copying octoprint_octolapse/static/docs/help/quality_issues_fast_trigger.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,862 ! copying octoprint_octolapse/static/docs/help/quality_issues_low_quality_snap_to_print.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,862 ! copying octoprint_octolapse/static/docs/help/quality_issues_no_print_features_detected.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,862 ! copying octoprint_octolapse/static/docs/help/settings.import.import_method.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,862 ! copying octoprint_octolapse/static/docs/help/settings.import.import_text.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,862 ! copying octoprint_octolapse/static/docs/help/snapshot_plan_missed_snapshots.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:00:49,863 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/img
2023-05-09 13:00:49,863 ! copying octoprint_octolapse/static/img/watermark.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/img
2023-05-09 13:00:49,863 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:00:49,863 ! copying octoprint_octolapse/static/js/jquery.minicolors.min.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:00:49,863 ! copying octoprint_octolapse/static/js/jquery.validate.min.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:00:49,863 ! copying octoprint_octolapse/static/js/octolapse.dialog.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:00:49,864 ! copying octoprint_octolapse/static/js/octolapse.dialog.renderings.in_process.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:00:49,864 ! copying octoprint_octolapse/static/js/octolapse.dialog.renderings.unfinished.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:00:49,864 ! copying octoprint_octolapse/static/js/octolapse.dialog.timelapse_files.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:00:49,864 ! copying octoprint_octolapse/static/js/octolapse.file_browser.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:00:49,864 ! copying octoprint_octolapse/static/js/octolapse.help.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:00:49,864 ! copying octoprint_octolapse/static/js/octolapse.helpers.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:00:49,865 ! copying octoprint_octolapse/static/js/octolapse.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:00:49,865 ! copying octoprint_octolapse/static/js/octolapse.profiles.camera.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:00:49,865 ! copying octoprint_octolapse/static/js/octolapse.profiles.camera.webcam.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:00:49,865 ! copying octoprint_octolapse/static/js/octolapse.profiles.camera.webcam.mjpg_streamer.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:00:49,865 ! copying octoprint_octolapse/static/js/octolapse.profiles.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:00:49,865 ! copying octoprint_octolapse/static/js/octolapse.profiles.library.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:00:49,866 ! copying octoprint_octolapse/static/js/octolapse.profiles.logging.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:00:49,866 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:00:49,866 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.slicer.cura.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:00:49,866 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.slicer.other.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:00:49,866 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.slicer.simplify_3d.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:00:49,866 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.slicer.slic3r_pe.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:00:49,867 ! copying octoprint_octolapse/static/js/octolapse.profiles.rendering.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:00:49,867 ! copying octoprint_octolapse/static/js/octolapse.profiles.stabilization.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:00:49,867 ! copying octoprint_octolapse/static/js/octolapse.profiles.trigger.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:00:49,867 ! copying octoprint_octolapse/static/js/octolapse.settings.import.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:00:49,867 ! copying octoprint_octolapse/static/js/octolapse.settings.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:00:49,867 ! copying octoprint_octolapse/static/js/octolapse.settings.main.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:00:49,868 ! copying octoprint_octolapse/static/js/octolapse.status.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:00:49,868 ! copying octoprint_octolapse/static/js/octolapse.status.snapshotplan.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:00:49,868 ! copying octoprint_octolapse/static/js/octolapse.status.snapshotplan_preview.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:00:49,868 ! copying octoprint_octolapse/static/js/showdown.min.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:00:49,868 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js/webcams
2023-05-09 13:00:49,868 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js/webcams/mjpg_streamer
2023-05-09 13:00:49,869 ! copying octoprint_octolapse/static/js/webcams/mjpg_streamer/raspi_cam_v2.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js/webcams/mjpg_streamer
2023-05-09 13:00:49,869 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:00:49,869 ! copying octoprint_octolapse/templates/octolapse_dialog.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:00:49,869 ! copying octoprint_octolapse/templates/octolapse_dialog_rendering_in_process.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:00:49,869 ! copying octoprint_octolapse/templates/octolapse_dialog_rendering_unfinished.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:00:49,869 ! copying octoprint_octolapse/templates/octolapse_dialog_timelapse_files.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:00:49,870 ! copying octoprint_octolapse/templates/octolapse_file_browser.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:00:49,870 ! copying octoprint_octolapse/templates/octolapse_helpers.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:00:49,870 ! copying octoprint_octolapse/templates/octolapse_navbar.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:00:49,870 ! copying octoprint_octolapse/templates/octolapse_profile_dialog_add_edit.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:00:49,870 ! copying octoprint_octolapse/templates/octolapse_profiles.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:00:49,870 ! copying octoprint_octolapse/templates/octolapse_profiles_camera.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:00:49,871 ! copying octoprint_octolapse/templates/octolapse_profiles_camera_webcam.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:00:49,871 ! copying octoprint_octolapse/templates/octolapse_profiles_camera_webcam_mjpg_streamer.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:00:49,871 ! copying octoprint_octolapse/templates/octolapse_profiles_library.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:00:49,871 ! copying octoprint_octolapse/templates/octolapse_profiles_logging.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:00:49,871 ! copying octoprint_octolapse/templates/octolapse_profiles_printer.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:00:49,871 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_automatic.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:00:49,872 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_automatic.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:00:49,872 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_cura.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:00:49,872 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_cura_4.2.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:00:49,872 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_other.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:00:49,872 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_simplify3d.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:00:49,872 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_slic3r_pe.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:00:49,873 ! copying octoprint_octolapse/templates/octolapse_profiles_rendering.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:00:49,873 ! copying octoprint_octolapse/templates/octolapse_profiles_stabilization.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:00:49,873 ! copying octoprint_octolapse/templates/octolapse_profiles_trigger.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:00:49,873 ! copying octoprint_octolapse/templates/octolapse_settings.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:00:49,873 ! copying octoprint_octolapse/templates/octolapse_settings_import.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:00:49,873 ! copying octoprint_octolapse/templates/octolapse_settings_main.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:00:49,874 ! copying octoprint_octolapse/templates/octolapse_snapshot_plan.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:00:49,874 ! copying octoprint_octolapse/templates/octolapse_status_extruder.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:00:49,874 ! copying octoprint_octolapse/templates/octolapse_status_position.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:00:49,874 ! copying octoprint_octolapse/templates/octolapse_status_printer_state.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:00:49,874 ! copying octoprint_octolapse/templates/octolapse_status_snapshot_plan.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:00:49,874 ! copying octoprint_octolapse/templates/octolapse_status_triggers.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:00:49,875 ! copying octoprint_octolapse/templates/octolapse_tab.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:00:49,875 ! copying octoprint_octolapse/templates/octolapse_tab_latest_snapshot.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:00:49,875 ! copying octoprint_octolapse/templates/octolapse_tab_settings_current.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:00:49,875 ! copying octoprint_octolapse/templates/octolapse_tab_settings_current_cameras.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:00:49,875 ! copying octoprint_octolapse/templates/octolapse_tab_snapshot_plan_preview_popup.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:00:49,875 ! copying octoprint_octolapse/templates/octolapse_tab_webcam_settings_popup.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:00:49,876 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams
2023-05-09 13:00:49,876 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams/mjpg_streamer
2023-05-09 13:00:49,876 ! copying octoprint_octolapse/templates/webcams/mjpg_streamer/logitech_c250.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams/mjpg_streamer
2023-05-09 13:00:49,876 ! copying octoprint_octolapse/templates/webcams/mjpg_streamer/logitech_c920.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams/mjpg_streamer
2023-05-09 13:00:49,876 ! copying octoprint_octolapse/templates/webcams/mjpg_streamer/raspi_cam_v2.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams/mjpg_streamer
2023-05-09 13:00:49,876 ! UPDATING build/lib.linux-aarch64-cpython-310/octoprint_octolapse/_version.py
2023-05-09 13:00:49,877 ! set build/lib.linux-aarch64-cpython-310/octoprint_octolapse/_version.py to 'v0.4.2'
2023-05-09 13:00:49,877 ! running build_ext
2023-05-09 13:00:49,877 ! Compiling Octolapse Parser Extension with <distutils.unixccompiler.UnixCCompiler object at 0x7f0cb60a60>.
2023-05-09 13:00:49,877 ! building 'GcodePositionProcessor' extension
2023-05-09 13:00:49,877 ! creating build/temp.linux-aarch64-cpython-310
2023-05-09 13:00:49,877 ! creating build/temp.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:00:49,878 ! creating build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:00:49,878 ! creating build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib
2023-05-09 13:00:49,878 ! creating build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:00:49,878 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/extruder.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/extruder.o -O3 -std=c++11
2023-05-09 13:00:49,878 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/gcode_comment_processor.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/gcode_comment_processor.o -O3 -std=c++11
2023-05-09 13:00:49,878 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.cpp: In member function 'void gcode_comment_processor::update_feature_from_section(position&) const':
2023-05-09 13:00:49,879 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.cpp:99:16: warning: enumeration value 'section_type_no_section' not handled in switch [-Wswitch]
2023-05-09 13:00:49,879 ! 99 |         switch (current_section_)
2023-05-09 13:00:49,879 ! |                ^
2023-05-09 13:00:49,879 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/gcode_parser.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/gcode_parser.o -O3 -std=c++11
2023-05-09 13:00:49,879 ! octoprint_octolapse/data/lib/c/gcode_parser.cpp: In member function 'bool gcode_parser::try_parse_gcode(const char*, parsed_command&)':
2023-05-09 13:00:49,879 ! octoprint_octolapse/data/lib/c/gcode_parser.cpp:148:47: warning: suggest parentheses around '&&' within '||' [-Wparentheses]
2023-05-09 13:00:49,880 ! 148 |     else if (cur_char > 32 || cur_char == ' ' && has_seen_character)
2023-05-09 13:00:49,880 ! |                               ~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:00:49,880 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/gcode_position.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/gcode_position.o -O3 -std=c++11
2023-05-09 13:00:49,880 ! octoprint_octolapse/data/lib/c/gcode_position.cpp: In member function 'void gcode_position::add_position(position&)':
2023-05-09 13:00:49,880 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:395:12: warning: operation on '((gcode_position*)this)->gcode_position::cur_pos_' may be undefined [-Wsequence-point]
2023-05-09 13:00:49,881 ! 395 |   cur_pos_ = (++cur_pos_) % NUM_POSITIONS;
2023-05-09 13:00:49,881 ! octoprint_octolapse/data/lib/c/gcode_position.cpp: In member function 'void gcode_position::add_position(parsed_command&)':
2023-05-09 13:00:49,881 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:402:12: warning: operation on '((gcode_position*)this)->gcode_position::cur_pos_' may be undefined [-Wsequence-point]
2023-05-09 13:00:49,881 ! 402 |   cur_pos_ = (++cur_pos_) % NUM_POSITIONS;
2023-05-09 13:00:49,881 ! octoprint_octolapse/data/lib/c/gcode_position.cpp: In member function 'void gcode_position::update(parsed_command&, long int, long int, long int)':
2023-05-09 13:00:49,881 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:659:31: warning: comparison of integer expressions of different signedness: 'const unsigned int' and 'int' [-Wsign-compare]
2023-05-09 13:00:49,881 ! 659 |                 if (increment > p_current_pos->height_increment && increment > 1)
2023-05-09 13:00:49,882 ! |                     ~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:00:49,882 ! octoprint_octolapse/data/lib/c/gcode_position.cpp: In member function 'void gcode_position::process_g10(position*, parsed_command&)':
2023-05-09 13:00:49,882 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:952:10: warning: variable 's' set but not used [-Wunused-but-set-variable]
2023-05-09 13:00:49,882 ! 952 |   double s = 0;
2023-05-09 13:00:49,882 ! |          ^
2023-05-09 13:00:49,882 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:953:8: warning: variable 'has_s' set but not used [-Wunused-but-set-variable]
2023-05-09 13:00:49,882 ! 953 |   bool has_s = false;
2023-05-09 13:00:49,883 ! |        ^~~~~
2023-05-09 13:00:49,883 ! In file included from octoprint_octolapse/data/lib/c/gcode_position.h:29,
2023-05-09 13:00:49,883 ! from octoprint_octolapse/data/lib/c/gcode_position.cpp:22:
2023-05-09 13:00:49,883 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h: At global scope:
2023-05-09 13:00:49,883 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:77:20: warning: 'SLICER_PE_SKIRT_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:00:49,883 ! 77 | static const char* SLICER_PE_SKIRT_COMMENTS[] = {"skirt", "move to first skirt point", NULL};
2023-05-09 13:00:49,883 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:00:49,884 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:73:20: warning: 'SLICER_PE_BRIDGE_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:00:49,884 ! 73 | static const char* SLICER_PE_BRIDGE_COMMENTS[] = {
2023-05-09 13:00:49,884 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:00:49,884 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:72:20: warning: 'SLICER_PE_GAP_FILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:00:49,884 ! 72 | static const char* SLICER_PE_GAP_FILL_COMMENTS[] = {"gap fill", "move to first gap fill point", NULL};
2023-05-09 13:00:49,884 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:00:49,885 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:69:20: warning: 'SLICER_PE_SOLID_INFILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:00:49,885 ! 69 | static const char* SLICER_PE_SOLID_INFILL_COMMENTS[] = {
2023-05-09 13:00:49,885 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:00:49,885 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:68:20: warning: 'SLICER_PE_INFILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:00:49,885 ! 68 | static const char* SLICER_PE_INFILL_COMMENTS[] = {"infill", "move to first infill point", NULL};
2023-05-09 13:00:49,885 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:00:49,885 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:67:20: warning: 'SLICER_PE_UNKNOWN_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:00:49,886 ! 67 | static const char* SLICER_PE_UNKNOWN_PERIMETER_COMMENTS[] = {"perimeter", "move to first perimeter point", NULL};
2023-05-09 13:00:49,886 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:00:49,886 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:64:20: warning: 'SLICER_PE_INNER_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:00:49,886 ! 64 | static const char* SLICER_PE_INNER_PERIMETER_COMMENTS[] = {
2023-05-09 13:00:49,886 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:00:49,886 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:61:20: warning: 'SLICER_PE_OUTER_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:00:49,886 ! 61 | static const char* SLICER_PE_OUTER_PERIMETER_COMMENTS[] = {
2023-05-09 13:00:49,887 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:00:49,887 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/gcode_position_processor.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/gcode_position_processor.o -O3 -std=c++11
2023-05-09 13:00:49,887 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:915: warning: ignoring '#pragma region location_detection_commands' [-Wunknown-pragmas]
2023-05-09 13:00:49,887 ! 915 | #pragma region location_detection_commands
2023-05-09 13:00:49,887 ! |
2023-05-09 13:00:49,887 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:955: warning: ignoring '#pragma endregion Parse' [-Wunknown-pragmas]
2023-05-09 13:00:49,887 ! 955 | #pragma endregion Parse the list of location detection commands
2023-05-09 13:00:49,888 ! |
2023-05-09 13:00:49,888 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1122: warning: ignoring '#pragma region Extract' [-Wunknown-pragmas]
2023-05-09 13:00:49,888 ! 1122 | #pragma region Extract extruder objects
2023-05-09 13:00:49,888 ! |
2023-05-09 13:00:49,888 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1219: warning: ignoring '#pragma endregion Parse' [-Wunknown-pragmas]
2023-05-09 13:00:49,888 ! 1219 | #pragma endregion Parse extruder objects
2023-05-09 13:00:49,889 ! |
2023-05-09 13:00:49,889 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1221: warning: ignoring '#pragma region Extract' [-Wunknown-pragmas]
2023-05-09 13:00:49,889 ! 1221 | #pragma region Extract firmware extruder offsets from the printer settings
2023-05-09 13:00:49,889 ! |
2023-05-09 13:00:49,889 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1334: warning: ignoring '#pragma endregion Extract' [-Wunknown-pragmas]
2023-05-09 13:00:49,889 ! 1334 | #pragma endregion Extract firmware extruder offsets from the printer settings
2023-05-09 13:00:49,890 ! |
2023-05-09 13:00:49,890 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp: In function 'int main(int, char**)':
2023-05-09 13:00:49,890 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:56:27: warning: 'void PyEval_InitThreads()' is deprecated [-Wdeprecated-declarations]
2023-05-09 13:00:49,890 ! 56 |         PyEval_InitThreads();
2023-05-09 13:00:49,890 ! |         ~~~~~~~~~~~~~~~~~~^~
2023-05-09 13:00:49,890 ! In file included from /usr/include/python3.10/Python.h:130,
2023-05-09 13:00:49,890 ! from octoprint_octolapse/data/lib/c/gcode_position_processor.h:30,
2023-05-09 13:00:49,891 ! from octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:23:
2023-05-09 13:00:49,891 ! /usr/include/python3.10/ceval.h:122:37: note: declared here
2023-05-09 13:00:49,891 ! 122 | Py_DEPRECATED(3.9) PyAPI_FUNC(void) PyEval_InitThreads(void);
2023-05-09 13:00:49,891 ! |                                     ^~~~~~~~~~~~~~~~~~
2023-05-09 13:00:49,891 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp: In function 'PyObject* Initialize(PyObject*, PyObject*)':
2023-05-09 13:00:49,891 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:371:19: warning: unused variable 'p_gcode_position' [-Wunused-variable]
2023-05-09 13:00:49,891 ! 371 |   gcode_position* p_gcode_position = NULL;
2023-05-09 13:00:49,892 ! |                   ^~~~~~~~~~~~~~~~
2023-05-09 13:00:49,892 ! In file included from /usr/include/c++/12.2.1/bits/cxxabi_init_exception.h:38,
2023-05-09 13:00:49,892 ! from /usr/include/c++/12.2.1/bits/exception_ptr.h:38,
2023-05-09 13:00:49,892 ! from /usr/include/c++/12.2.1/exception:168,
2023-05-09 13:00:49,892 ! from /usr/include/c++/12.2.1/stdexcept:38,
2023-05-09 13:00:49,892 ! from /usr/include/c++/12.2.1/system_error:41,
2023-05-09 13:00:49,893 ! from /usr/include/c++/12.2.1/bits/ios_base.h:46,
2023-05-09 13:00:49,893 ! from /usr/include/c++/12.2.1/iomanip:40,
2023-05-09 13:00:49,893 ! from octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:24:
2023-05-09 13:00:49,893 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp: In function 'bool ParseStabilizationArgs(PyObject*, stabilization_args*, PyObject**, PyObject**)':
2023-05-09 13:00:49,893 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1406:12: error: converting to 'bool' from 'std::nullptr_t' requires direct-initialization [-fpermissive]
2023-05-09 13:00:49,893 ! 1406 |     return NULL;
2023-05-09 13:00:49,893 ! |            ^~~~
2023-05-09 13:00:49,894 ! In file included from octoprint_octolapse/data/lib/c/gcode_position_processor.h:37:
2023-05-09 13:00:49,894 ! octoprint_octolapse/data/lib/c/stabilization_smart_gcode.h: At global scope:
2023-05-09 13:00:49,894 ! octoprint_octolapse/data/lib/c/stabilization_smart_gcode.h:5:20: warning: 'SMART_GCODE_STABILIZATION' defined but not used [-Wunused-variable]
2023-05-09 13:00:49,894 ! 5 | static const char* SMART_GCODE_STABILIZATION = "smart_gcode";
2023-05-09 13:00:49,894 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:00:49,894 ! In file included from octoprint_octolapse/data/lib/c/gcode_position_processor.h:36:
2023-05-09 13:00:49,894 ! octoprint_octolapse/data/lib/c/stabilization_smart_layer.h:11:20: warning: 'SMART_LAYER_STABILIZATION' defined but not used [-Wunused-variable]
2023-05-09 13:00:49,895 ! 11 | static const char* SMART_LAYER_STABILIZATION = "smart_layer";
2023-05-09 13:00:49,895 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:00:49,895 ! In file included from octoprint_octolapse/data/lib/c/gcode_position_processor.h:35:
2023-05-09 13:00:49,895 ! octoprint_octolapse/data/lib/c/stabilization.h:44:20: warning: 'send_parsed_command_never' defined but not used [-Wunused-variable]
2023-05-09 13:00:49,895 ! 44 | static const char* send_parsed_command_never = "never";
2023-05-09 13:00:49,895 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:00:49,895 ! octoprint_octolapse/data/lib/c/stabilization.h:43:20: warning: 'send_parsed_command_last' defined but not used [-Wunused-variable]
2023-05-09 13:00:49,896 ! 43 | static const char* send_parsed_command_last = "last";
2023-05-09 13:00:49,896 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:00:49,896 ! octoprint_octolapse/data/lib/c/stabilization.h:42:20: warning: 'send_parsed_command_first' defined but not used [-Wunused-variable]
2023-05-09 13:00:49,896 ! 42 | static const char* send_parsed_command_first = "first";
2023-05-09 13:00:49,896 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:00:49,896 ! octoprint_octolapse/data/lib/c/stabilization.h:41:20: warning: 'snapshot_action' defined but not used [-Wunused-variable]
2023-05-09 13:00:49,897 ! 41 | static const char* snapshot_action = "snapshot";
2023-05-09 13:00:49,897 ! |                    ^~~~~~~~~~~~~~~
2023-05-09 13:00:49,897 ! octoprint_octolapse/data/lib/c/stabilization.h:40:20: warning: 'travel_action' defined but not used [-Wunused-variable]
2023-05-09 13:00:49,897 ! 40 | static const char* travel_action = "travel";
2023-05-09 13:00:49,897 ! |                    ^~~~~~~~~~~~~
2023-05-09 13:00:49,897 ! In file included from octoprint_octolapse/data/lib/c/gcode_position.h:29,
2023-05-09 13:00:49,898 ! from octoprint_octolapse/data/lib/c/gcode_position_processor.h:33:
2023-05-09 13:00:49,898 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:77:20: warning: 'SLICER_PE_SKIRT_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:00:49,898 ! 77 | static const char* SLICER_PE_SKIRT_COMMENTS[] = {"skirt", "move to first skirt point", NULL};
2023-05-09 13:00:49,898 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:00:49,898 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:73:20: warning: 'SLICER_PE_BRIDGE_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:00:49,898 ! 73 | static const char* SLICER_PE_BRIDGE_COMMENTS[] = {
2023-05-09 13:00:49,898 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:00:49,899 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:72:20: warning: 'SLICER_PE_GAP_FILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:00:49,899 ! 72 | static const char* SLICER_PE_GAP_FILL_COMMENTS[] = {"gap fill", "move to first gap fill point", NULL};
2023-05-09 13:00:49,899 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:00:49,899 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:69:20: warning: 'SLICER_PE_SOLID_INFILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:00:49,899 ! 69 | static const char* SLICER_PE_SOLID_INFILL_COMMENTS[] = {
2023-05-09 13:00:49,899 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:00:49,899 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:68:20: warning: 'SLICER_PE_INFILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:00:49,900 ! 68 | static const char* SLICER_PE_INFILL_COMMENTS[] = {"infill", "move to first infill point", NULL};
2023-05-09 13:00:49,900 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:00:49,900 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:67:20: warning: 'SLICER_PE_UNKNOWN_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:00:49,900 ! 67 | static const char* SLICER_PE_UNKNOWN_PERIMETER_COMMENTS[] = {"perimeter", "move to first perimeter point", NULL};
2023-05-09 13:00:49,900 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:00:49,900 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:64:20: warning: 'SLICER_PE_INNER_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:00:49,901 ! 64 | static const char* SLICER_PE_INNER_PERIMETER_COMMENTS[] = {
2023-05-09 13:00:49,901 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:00:49,901 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:61:20: warning: 'SLICER_PE_OUTER_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:00:49,901 ! 61 | static const char* SLICER_PE_OUTER_PERIMETER_COMMENTS[] = {
2023-05-09 13:00:49,901 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:00:49,901 ! error: command '/usr/bin/gcc' failed with exit code 1
2023-05-09 13:00:49,901 ! [end of output]
2023-05-09 13:00:49,902 ! 
2023-05-09 13:00:49,902 ! note: This error originates from a subprocess, and is likely not a problem with pip.
2023-05-09 13:00:49,902 ! error: legacy-install-failure
2023-05-09 13:00:49,902 ! 
2023-05-09 13:00:49,902 ! × Encountered error while trying to install package.
2023-05-09 13:00:49,902 ! ╰─> Octolapse
2023-05-09 13:00:49,902 ! 
2023-05-09 13:00:49,903 ! note: This is an issue with the package mentioned above, not pip.
2023-05-09 13:00:49,903 ! hint: See above for output from the failure.
2023-05-09 13:04:06,101   /usr/bin/python3 -m pip --disable-pip-version-check install file:///tmp/tmpi7zfv7w4/Octolapse-master.zip --no-cache-dir --user
2023-05-09 13:04:14,223 > Processing /tmp/tmpi7zfv7w4/Octolapse-master.zip
2023-05-09 13:04:16,233 > Preparing metadata (setup.py): started
2023-05-09 13:04:37,007 > Preparing metadata (setup.py): finished with status 'done'
2023-05-09 13:04:37,010 > Requirement already satisfied: pillow>=6.2.0<7.0.0 in /usr/lib/python3.10/site-packages (from Octolapse==0.4.2) (9.3.0)
2023-05-09 13:04:37,011 > Requirement already satisfied: sarge in /usr/lib/python3.10/site-packages (from Octolapse==0.4.2) (0.1.6)
2023-05-09 13:04:37,016 > Requirement already satisfied: six in /usr/lib/python3.10/site-packages (from Octolapse==0.4.2) (1.16.0)
2023-05-09 13:04:37,018 > Requirement already satisfied: OctoPrint>1.3.8 in /usr/lib/python3.10/site-packages (from Octolapse==0.4.2) (1.8.7)
2023-05-09 13:04:37,020 > Requirement already satisfied: psutil in /usr/lib/python3.10/site-packages (from Octolapse==0.4.2) (5.9.4)
2023-05-09 13:04:37,021 > Requirement already satisfied: file_read_backwards in /usr/lib/python3.10/site-packages (from Octolapse==0.4.2) (3.0.0)
2023-05-09 13:04:37,022 > Requirement already satisfied: setuptools>=6.0 in /usr/lib/python3.10/site-packages (from Octolapse==0.4.2) (65.6.0)
2023-05-09 13:04:37,023 > Requirement already satisfied: awesome-slugify<1.7,>=1.6.5 in /usr/lib/python3.10/site-packages (from Octolapse==0.4.2) (1.6.5)
2023-05-09 13:04:37,024 > Requirement already satisfied: regex in /usr/lib/python3.10/site-packages (from awesome-slugify<1.7,>=1.6.5->Octolapse==0.4.2) (2022.10.31)
2023-05-09 13:04:37,026 > Requirement already satisfied: Unidecode<0.05,>=0.04.14 in /usr/lib/python3.10/site-packages (from awesome-slugify<1.7,>=1.6.5->Octolapse==0.4.2) (0.4.21)
2023-05-09 13:04:37,027 > Requirement already satisfied: OctoPrint-FileCheck>=2021.2.23 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2021.2.23)
2023-05-09 13:04:37,028 > Requirement already satisfied: OctoPrint-FirmwareCheck>=2021.10.11 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2021.10.11)
2023-05-09 13:04:37,029 > Requirement already satisfied: OctoPrint-PiSupport>=2022.6.13 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2022.6.13)
2023-05-09 13:04:37,030 > Requirement already satisfied: argon2_cffi<22,>=21.3.0 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (21.3.0)
2023-05-09 13:04:37,031 > Requirement already satisfied: cachelib<0.3,>=0.2 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (0.2.0)
2023-05-09 13:04:37,031 > Requirement already satisfied: Click<9,>=8.0.3 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (8.1.3)
2023-05-09 13:04:37,038 > Requirement already satisfied: colorlog<7,>=6 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (6.7.0)
2023-05-09 13:04:37,039 > Requirement already satisfied: emoji<2,>=1.4.2 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.7.0)
2023-05-09 13:04:37,040 > Requirement already satisfied: feedparser<7,>=6.0.8 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (6.0.10)
2023-05-09 13:04:37,041 > Requirement already satisfied: filetype<2,>=1.0.7 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.2.0)
2023-05-09 13:04:37,042 > Requirement already satisfied: Flask-Assets<3,>=2.0 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2.0)
2023-05-09 13:04:37,042 > Requirement already satisfied: Flask-Babel<3,>=2.0 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2.0.0)
2023-05-09 13:04:37,043 > Requirement already satisfied: Flask-Login<0.6,>=0.5 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (0.5.0)
2023-05-09 13:04:37,044 > Requirement already satisfied: Flask-Limiter<3,>=2.6 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2.9.2)
2023-05-09 13:04:37,045 > Requirement already satisfied: flask<2.2,>=2.1 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2.1.3)
2023-05-09 13:04:37,046 > Requirement already satisfied: frozendict<3,>=2.0 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2.3.7)
2023-05-09 13:04:37,047 > Requirement already satisfied: future<1,>=0.18.2 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (0.18.3)
2023-05-09 13:04:37,048 > Requirement already satisfied: markdown<4,>=3.2.2 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (3.4.3)
2023-05-09 13:04:37,049 > Requirement already satisfied: netaddr<0.9,>=0.8 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (0.8.0)
2023-05-09 13:04:37,050 > Requirement already satisfied: netifaces<1,>=0.11 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (0.11.0)
2023-05-09 13:04:37,050 > Requirement already satisfied: passlib<2,>=1.7.4 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.7.4)
2023-05-09 13:04:37,051 > Requirement already satisfied: pathvalidate<3,>=2.4.1 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2.5.2)
2023-05-09 13:04:37,052 > Requirement already satisfied: pkginfo<2,>=1.7.1 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.9.6)
2023-05-09 13:04:37,054 > Requirement already satisfied: pylru<2,>=1.2 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.2.1)
2023-05-09 13:04:37,055 > Requirement already satisfied: pyserial<4,>=3.4 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (3.5)
2023-05-09 13:04:37,055 > Requirement already satisfied: PyYAML<6,>=5.4.1 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (5.4.1)
2023-05-09 13:04:37,056 > Requirement already satisfied: requests<3,>=2.26.0 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2.28.2)
2023-05-09 13:04:37,057 > Requirement already satisfied: semantic_version<3,>=2.8.5 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2.10.0)
2023-05-09 13:04:37,058 > Requirement already satisfied: sentry-sdk<2,>=1.5.7 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.19.1)
2023-05-09 13:04:37,059 > Requirement already satisfied: tornado<7,>=6.0.4 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (6.2)
2023-05-09 13:04:37,061 > Requirement already satisfied: watchdog<2,>=1 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.0.2)
2023-05-09 13:04:37,062 > Requirement already satisfied: websocket-client<2,>=1.2.1 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.5.1)
2023-05-09 13:04:37,062 > Requirement already satisfied: werkzeug<2.1,>=2.0 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2.0.3)
2023-05-09 13:04:37,063 > Requirement already satisfied: wrapt<1.15,>=1.14 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.14.1)
2023-05-09 13:04:37,064 > Requirement already satisfied: zeroconf<0.34,>=0.33 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (0.33.4)
2023-05-09 13:04:37,065 > Requirement already satisfied: zipstream-ng<2.0.0,>=1.3.4 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.5.0)
2023-05-09 13:04:37,069 > Requirement already satisfied: blinker<2,>=1.4 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.6.1)
2023-05-09 13:04:37,070 > Requirement already satisfied: typing-extensions>=4.2 in /usr/lib/python3.10/site-packages (from blinker<2,>=1.4->OctoPrint>1.3.8->Octolapse==0.4.2) (4.5.0)
2023-05-09 13:04:37,071 > Requirement already satisfied: sgmllib3k in /usr/lib/python3.10/site-packages (from feedparser<7,>=6.0.8->OctoPrint>1.3.8->Octolapse==0.4.2) (1.0.0)
2023-05-09 13:04:37,072 > Requirement already satisfied: Jinja2>=3.0 in /usr/lib/python3.10/site-packages (from flask<2.2,>=2.1->OctoPrint>1.3.8->Octolapse==0.4.2) (3.1.2)
2023-05-09 13:04:37,073 > Requirement already satisfied: itsdangerous>=2.0 in /usr/lib/python3.10/site-packages (from flask<2.2,>=2.1->OctoPrint>1.3.8->Octolapse==0.4.2) (2.1.2)
2023-05-09 13:04:37,073 > Requirement already satisfied: webassets>=2.0 in /usr/lib/python3.10/site-packages (from Flask-Assets<3,>=2.0->OctoPrint>1.3.8->Octolapse==0.4.2) (2.0)
2023-05-09 13:04:37,074 > Requirement already satisfied: Babel>=2.3 in /usr/lib/python3.10/site-packages (from Flask-Babel<3,>=2.0->OctoPrint>1.3.8->Octolapse==0.4.2) (2.12.1)
2023-05-09 13:04:37,075 > Requirement already satisfied: pytz in /usr/lib/python3.10/site-packages (from Flask-Babel<3,>=2.0->OctoPrint>1.3.8->Octolapse==0.4.2) (2023.3)
2023-05-09 13:04:37,075 > Requirement already satisfied: rich<13,>=12 in /usr/lib/python3.10/site-packages (from Flask-Limiter<3,>=2.6->OctoPrint>1.3.8->Octolapse==0.4.2) (12.6.0)
2023-05-09 13:04:37,076 > Requirement already satisfied: limits>=2.8 in /usr/lib/python3.10/site-packages (from Flask-Limiter<3,>=2.6->OctoPrint>1.3.8->Octolapse==0.4.2) (3.3.1)
2023-05-09 13:04:37,077 > Requirement already satisfied: ordered-set<5,>4 in /usr/lib/python3.10/site-packages (from Flask-Limiter<3,>=2.6->OctoPrint>1.3.8->Octolapse==0.4.2) (4.1.0)
2023-05-09 13:04:37,077 > Requirement already satisfied: idna<4,>=2.5 in /usr/lib/python3.10/site-packages (from requests<3,>=2.26.0->OctoPrint>1.3.8->Octolapse==0.4.2) (3.4)
2023-05-09 13:04:37,078 > Requirement already satisfied: charset-normalizer<4,>=2 in /usr/lib/python3.10/site-packages (from requests<3,>=2.26.0->OctoPrint>1.3.8->Octolapse==0.4.2) (3.1.0)
2023-05-09 13:04:37,078 > Requirement already satisfied: certifi>=2017.4.17 in /usr/lib/python3.10/site-packages (from requests<3,>=2.26.0->OctoPrint>1.3.8->Octolapse==0.4.2) (2022.12.7)
2023-05-09 13:04:37,078 > Requirement already satisfied: urllib3<1.27,>=1.21.1 in /usr/lib/python3.10/site-packages (from requests<3,>=2.26.0->OctoPrint>1.3.8->Octolapse==0.4.2) (1.26.15)
2023-05-09 13:04:37,079 > Requirement already satisfied: ifaddr>=0.1.7 in /usr/lib/python3.10/site-packages (from zeroconf<0.34,>=0.33->OctoPrint>1.3.8->Octolapse==0.4.2) (0.2.0)
2023-05-09 13:04:37,079 > Requirement already satisfied: MarkupSafe>=2.0 in /usr/lib/python3.10/site-packages (from Jinja2>=3.0->flask<2.2,>=2.1->OctoPrint>1.3.8->Octolapse==0.4.2) (2.1.2)
2023-05-09 13:04:37,079 > Requirement already satisfied: packaging<24,>=21 in /usr/lib/python3.10/site-packages (from limits>=2.8->Flask-Limiter<3,>=2.6->OctoPrint>1.3.8->Octolapse==0.4.2) (23.0)
2023-05-09 13:04:37,080 > Requirement already satisfied: deprecated>=1.2 in /usr/lib/python3.10/site-packages (from limits>=2.8->Flask-Limiter<3,>=2.6->OctoPrint>1.3.8->Octolapse==0.4.2) (1.2.13)
2023-05-09 13:04:37,080 > Requirement already satisfied: importlib-resources>=1.3 in /usr/lib/python3.10/site-packages (from limits>=2.8->Flask-Limiter<3,>=2.6->OctoPrint>1.3.8->Octolapse==0.4.2) (5.12.0)
2023-05-09 13:04:37,081 > Requirement already satisfied: pygments<3.0.0,>=2.6.0 in /usr/lib/python3.10/site-packages (from rich<13,>=12->Flask-Limiter<3,>=2.6->OctoPrint>1.3.8->Octolapse==0.4.2) (2.15.0)
2023-05-09 13:04:37,081 > Requirement already satisfied: commonmark<0.10.0,>=0.9.0 in /usr/lib/python3.10/site-packages (from rich<13,>=12->Flask-Limiter<3,>=2.6->OctoPrint>1.3.8->Octolapse==0.4.2) (0.9.1)
2023-05-09 13:04:37,913 ! DEPRECATION: Octolapse is being installed using the legacy 'setup.py install' method, because it does not have a 'pyproject.toml' and the 'wheel' package is not installed. pip 23.1 will enforce this behaviour change. A possible replacement is to enable the '--use-pep517' option. Discussion can be found at https://github.com/pypa/pip/issues/8559
2023-05-09 13:04:38,417 > Installing collected packages: Octolapse
2023-05-09 13:04:38,419 > Running setup.py install for Octolapse: started
2023-05-09 13:05:39,703 > Running setup.py install for Octolapse: still running...
2023-05-09 13:05:40,867 > Running setup.py install for Octolapse: finished with status 'error'
2023-05-09 13:05:41,485 ! error: subprocess-exited-with-error
2023-05-09 13:05:41,488 ! 
2023-05-09 13:05:41,490 ! × Running setup.py install for Octolapse did not run successfully.
2023-05-09 13:05:41,491 ! │ exit code: 1
2023-05-09 13:05:41,492 ! ╰─> [1152 lines of output]
2023-05-09 13:05:41,493 ! likely tags: v0.4.2
2023-05-09 13:05:41,494 ! picking v0.4.2
2023-05-09 13:05:41,495 ! got version from expanded keyword {'version': 'v0.4.2', 'full-revisionid': 'c6c86782cdbfc3590fa4b1bf2e63064eb459b16b', 'dirty': False, 'error': None, 'date': '2023-04-02T10:23:21-0500'}
2023-05-09 13:05:41,496 ! Argon2 passlib backend is not available, not using it for password hashing
2023-05-09 13:05:41,497 ! /tmp/pip-req-build-pip7rpeg/setup.py:58: DeprecationWarning: distutils Version classes are deprecated. Use packaging.version instead.
2023-05-09 13:05:41,498 ! if LooseVersion(octoprint.server.VERSION) < LooseVersion("1.4"):
2023-05-09 13:05:41,502 ! Found packages: {'octoprint_octolapse_setuptools', 'octoprint_octolapse', 'octoprint_octolapse.test'}
2023-05-09 13:05:41,502 ! running install
2023-05-09 13:05:41,503 ! /usr/lib/python3.10/site-packages/setuptools/command/install.py:34: SetuptoolsDeprecationWarning: setup.py install is deprecated. Use build and pip and other standards-based tools.
2023-05-09 13:05:41,503 ! warnings.warn(
2023-05-09 13:05:41,503 ! running build
2023-05-09 13:05:41,504 ! running build_py
2023-05-09 13:05:41,504 ! creating build
2023-05-09 13:05:41,507 ! creating build/lib.linux-aarch64-cpython-310
2023-05-09 13:05:41,508 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse_setuptools
2023-05-09 13:05:41,509 ! copying octoprint_octolapse_setuptools/__init__.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse_setuptools
2023-05-09 13:05:41,510 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:05:41,510 ! copying octoprint_octolapse/snapshot.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:05:41,511 ! copying octoprint_octolapse/log.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:05:41,511 ! copying octoprint_octolapse/__init__.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:05:41,512 ! copying octoprint_octolapse/messenger_worker.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:05:41,512 ! copying octoprint_octolapse/gcode_processor.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:05:41,512 ! copying octoprint_octolapse/gcode_commands.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:05:41,513 ! copying octoprint_octolapse/camera.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:05:41,513 ! copying octoprint_octolapse/position.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:05:41,513 ! copying octoprint_octolapse/stabilization_preprocessing.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:05:41,514 ! copying octoprint_octolapse/utility.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:05:41,514 ! copying octoprint_octolapse/settings_external.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:05:41,514 ! copying octoprint_octolapse/render.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:05:41,515 ! copying octoprint_octolapse/settings_preprocessor.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:05:41,515 ! copying octoprint_octolapse/script.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:05:41,515 ! copying octoprint_octolapse/migration.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:05:41,516 ! copying octoprint_octolapse/_version.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:05:41,516 ! copying octoprint_octolapse/stabilization_gcode.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:05:41,516 ! copying octoprint_octolapse/settings.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:05:41,517 ! copying octoprint_octolapse/error_messages.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:05:41,517 ! copying octoprint_octolapse/trigger.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:05:41,518 ! copying octoprint_octolapse/timelapse.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:05:41,518 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:05:41,518 ! copying octoprint_octolapse/test/test_settings.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:05:41,519 ! copying octoprint_octolapse/test/test_trigger_layer.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:05:41,519 ! copying octoprint_octolapse/test/__init__.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:05:41,520 ! copying octoprint_octolapse/test/test_extruder.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:05:41,520 ! copying octoprint_octolapse/test/test_parsing.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:05:41,521 ! copying octoprint_octolapse/test/test_render.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:05:41,521 ! copying octoprint_octolapse/test/test_timelapse.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:05:41,521 ! copying octoprint_octolapse/test/test_intersection.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:05:41,522 ! copying octoprint_octolapse/test/test_trigger_gcode.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:05:41,522 ! copying octoprint_octolapse/test/testing_utilities.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:05:41,522 ! copying octoprint_octolapse/test/test_octolapseplugin.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:05:41,523 ! copying octoprint_octolapse/test/test_position.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:05:41,523 ! copying octoprint_octolapse/test/test_trigger_timer.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:05:41,523 ! copying octoprint_octolapse/test/test_command.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:05:41,523 ! copying octoprint_octolapse/test/test_settings_slicer.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:05:41,524 ! copying octoprint_octolapse/test/test_utility.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:05:41,524 ! copying octoprint_octolapse/test/test_snapshotGcode.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:05:41,524 ! copying octoprint_octolapse/test/test_migration_version.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:05:41,525 ! copying octoprint_octolapse/test/test_trigger.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:05:41,525 ! running egg_info
2023-05-09 13:05:41,525 ! creating Octolapse.egg-info
2023-05-09 13:05:41,526 ! writing Octolapse.egg-info/PKG-INFO
2023-05-09 13:05:41,526 ! writing dependency_links to Octolapse.egg-info/dependency_links.txt
2023-05-09 13:05:41,526 ! writing entry points to Octolapse.egg-info/entry_points.txt
2023-05-09 13:05:41,527 ! writing requirements to Octolapse.egg-info/requires.txt
2023-05-09 13:05:41,527 ! writing top-level names to Octolapse.egg-info/top_level.txt
2023-05-09 13:05:41,527 ! writing manifest file 'Octolapse.egg-info/SOURCES.txt'
2023-05-09 13:05:41,527 ! reading manifest file 'Octolapse.egg-info/SOURCES.txt'
2023-05-09 13:05:41,528 ! reading manifest template 'MANIFEST.in'
2023-05-09 13:05:41,528 ! warning: no files found matching 'README.md'
2023-05-09 13:05:41,528 ! warning: no files found matching '*' under directory 'octoprint_octolapse/translations'
2023-05-09 13:05:41,528 ! warning: no files found matching '*' under directory 'octoprint_octolapse/data/images'
2023-05-09 13:05:41,529 ! adding license file 'LICENSE'
2023-05-09 13:05:41,529 ! writing manifest file 'Octolapse.egg-info/SOURCES.txt'
2023-05-09 13:05:41,529 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data' as data is deprecated, please list it in `packages`.
2023-05-09 13:05:41,530 ! !!
2023-05-09 13:05:41,530 ! 
2023-05-09 13:05:41,530 ! 
2023-05-09 13:05:41,530 ! ############################
2023-05-09 13:05:41,531 ! # Package would be ignored #
2023-05-09 13:05:41,531 ! ############################
2023-05-09 13:05:41,531 ! Python recognizes 'octoprint_octolapse.data' as an importable package,
2023-05-09 13:05:41,531 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:05:41,532 ! 
2023-05-09 13:05:41,532 ! 'octoprint_octolapse.data' has been automatically added to the distribution only
2023-05-09 13:05:41,532 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:05:41,533 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:05:41,533 ! 
2023-05-09 13:05:41,533 ! Please make sure that 'octoprint_octolapse.data' is included as a package by using
2023-05-09 13:05:41,533 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:05:41,534 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:05:41,534 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:05:41,534 ! 
2023-05-09 13:05:41,535 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:05:41,535 ! documentation page.
2023-05-09 13:05:41,535 ! 
2023-05-09 13:05:41,535 ! 
2023-05-09 13:05:41,536 ! !!
2023-05-09 13:05:41,536 ! 
2023-05-09 13:05:41,536 ! check.warn(importable)
2023-05-09 13:05:41,536 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.Images' as data is deprecated, please list it in `packages`.
2023-05-09 13:05:41,537 ! !!
2023-05-09 13:05:41,537 ! 
2023-05-09 13:05:41,537 ! 
2023-05-09 13:05:41,538 ! ############################
2023-05-09 13:05:41,538 ! # Package would be ignored #
2023-05-09 13:05:41,538 ! ############################
2023-05-09 13:05:41,538 ! Python recognizes 'octoprint_octolapse.data.Images' as an importable package,
2023-05-09 13:05:41,539 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:05:41,539 ! 
2023-05-09 13:05:41,539 ! 'octoprint_octolapse.data.Images' has been automatically added to the distribution only
2023-05-09 13:05:41,539 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:05:41,540 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:05:41,540 ! 
2023-05-09 13:05:41,540 ! Please make sure that 'octoprint_octolapse.data.Images' is included as a package by using
2023-05-09 13:05:41,541 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:05:41,541 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:05:41,541 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:05:41,542 ! 
2023-05-09 13:05:41,542 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:05:41,542 ! documentation page.
2023-05-09 13:05:41,542 ! 
2023-05-09 13:05:41,543 ! 
2023-05-09 13:05:41,543 ! !!
2023-05-09 13:05:41,543 ! 
2023-05-09 13:05:41,543 ! check.warn(importable)
2023-05-09 13:05:41,544 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.fonts.DejaVu' as data is deprecated, please list it in `packages`.
2023-05-09 13:05:41,544 ! !!
2023-05-09 13:05:41,544 ! 
2023-05-09 13:05:41,545 ! 
2023-05-09 13:05:41,545 ! ############################
2023-05-09 13:05:41,545 ! # Package would be ignored #
2023-05-09 13:05:41,545 ! ############################
2023-05-09 13:05:41,545 ! Python recognizes 'octoprint_octolapse.data.fonts.DejaVu' as an importable package,
2023-05-09 13:05:41,546 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:05:41,546 ! 
2023-05-09 13:05:41,546 ! 'octoprint_octolapse.data.fonts.DejaVu' has been automatically added to the distribution only
2023-05-09 13:05:41,546 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:05:41,546 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:05:41,547 ! 
2023-05-09 13:05:41,547 ! Please make sure that 'octoprint_octolapse.data.fonts.DejaVu' is included as a package by using
2023-05-09 13:05:41,547 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:05:41,547 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:05:41,547 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:05:41,548 ! 
2023-05-09 13:05:41,548 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:05:41,548 ! documentation page.
2023-05-09 13:05:41,548 ! 
2023-05-09 13:05:41,548 ! 
2023-05-09 13:05:41,549 ! !!
2023-05-09 13:05:41,549 ! 
2023-05-09 13:05:41,549 ! check.warn(importable)
2023-05-09 13:05:41,549 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.lib.c' as data is deprecated, please list it in `packages`.
2023-05-09 13:05:41,549 ! !!
2023-05-09 13:05:41,550 ! 
2023-05-09 13:05:41,550 ! 
2023-05-09 13:05:41,550 ! ############################
2023-05-09 13:05:41,550 ! # Package would be ignored #
2023-05-09 13:05:41,550 ! ############################
2023-05-09 13:05:41,551 ! Python recognizes 'octoprint_octolapse.data.lib.c' as an importable package,
2023-05-09 13:05:41,551 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:05:41,551 ! 
2023-05-09 13:05:41,551 ! 'octoprint_octolapse.data.lib.c' has been automatically added to the distribution only
2023-05-09 13:05:41,551 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:05:41,552 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:05:41,552 ! 
2023-05-09 13:05:41,552 ! Please make sure that 'octoprint_octolapse.data.lib.c' is included as a package by using
2023-05-09 13:05:41,552 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:05:41,552 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:05:41,553 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:05:41,553 ! 
2023-05-09 13:05:41,553 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:05:41,553 ! documentation page.
2023-05-09 13:05:41,553 ! 
2023-05-09 13:05:41,554 ! 
2023-05-09 13:05:41,554 ! !!
2023-05-09 13:05:41,554 ! 
2023-05-09 13:05:41,554 ! check.warn(importable)
2023-05-09 13:05:41,554 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.scripts.gcode.cura' as data is deprecated, please list it in `packages`.
2023-05-09 13:05:41,555 ! !!
2023-05-09 13:05:41,555 ! 
2023-05-09 13:05:41,555 ! 
2023-05-09 13:05:41,555 ! ############################
2023-05-09 13:05:41,555 ! # Package would be ignored #
2023-05-09 13:05:41,556 ! ############################
2023-05-09 13:05:41,556 ! Python recognizes 'octoprint_octolapse.data.scripts.gcode.cura' as an importable package,
2023-05-09 13:05:41,556 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:05:41,556 ! 
2023-05-09 13:05:41,556 ! 'octoprint_octolapse.data.scripts.gcode.cura' has been automatically added to the distribution only
2023-05-09 13:05:41,557 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:05:41,557 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:05:41,557 ! 
2023-05-09 13:05:41,557 ! Please make sure that 'octoprint_octolapse.data.scripts.gcode.cura' is included as a package by using
2023-05-09 13:05:41,557 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:05:41,558 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:05:41,558 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:05:41,558 ! 
2023-05-09 13:05:41,558 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:05:41,558 ! documentation page.
2023-05-09 13:05:41,559 ! 
2023-05-09 13:05:41,559 ! 
2023-05-09 13:05:41,559 ! !!
2023-05-09 13:05:41,559 ! 
2023-05-09 13:05:41,559 ! check.warn(importable)
2023-05-09 13:05:41,560 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.scripts.linux' as data is deprecated, please list it in `packages`.
2023-05-09 13:05:41,560 ! !!
2023-05-09 13:05:41,560 ! 
2023-05-09 13:05:41,560 ! 
2023-05-09 13:05:41,561 ! ############################
2023-05-09 13:05:41,561 ! # Package would be ignored #
2023-05-09 13:05:41,561 ! ############################
2023-05-09 13:05:41,561 ! Python recognizes 'octoprint_octolapse.data.scripts.linux' as an importable package,
2023-05-09 13:05:41,561 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:05:41,562 ! 
2023-05-09 13:05:41,562 ! 'octoprint_octolapse.data.scripts.linux' has been automatically added to the distribution only
2023-05-09 13:05:41,562 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:05:41,562 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:05:41,562 ! 
2023-05-09 13:05:41,563 ! Please make sure that 'octoprint_octolapse.data.scripts.linux' is included as a package by using
2023-05-09 13:05:41,563 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:05:41,563 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:05:41,563 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:05:41,563 ! 
2023-05-09 13:05:41,563 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:05:41,564 ! documentation page.
2023-05-09 13:05:41,564 ! 
2023-05-09 13:05:41,564 ! 
2023-05-09 13:05:41,564 ! !!
2023-05-09 13:05:41,564 ! 
2023-05-09 13:05:41,565 ! check.warn(importable)
2023-05-09 13:05:41,565 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.scripts.windows' as data is deprecated, please list it in `packages`.
2023-05-09 13:05:41,565 ! !!
2023-05-09 13:05:41,565 ! 
2023-05-09 13:05:41,565 ! 
2023-05-09 13:05:41,566 ! ############################
2023-05-09 13:05:41,566 ! # Package would be ignored #
2023-05-09 13:05:41,566 ! ############################
2023-05-09 13:05:41,566 ! Python recognizes 'octoprint_octolapse.data.scripts.windows' as an importable package,
2023-05-09 13:05:41,566 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:05:41,567 ! 
2023-05-09 13:05:41,567 ! 'octoprint_octolapse.data.scripts.windows' has been automatically added to the distribution only
2023-05-09 13:05:41,567 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:05:41,567 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:05:41,567 ! 
2023-05-09 13:05:41,568 ! Please make sure that 'octoprint_octolapse.data.scripts.windows' is included as a package by using
2023-05-09 13:05:41,568 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:05:41,568 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:05:41,568 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:05:41,568 ! 
2023-05-09 13:05:41,569 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:05:41,569 ! documentation page.
2023-05-09 13:05:41,569 ! 
2023-05-09 13:05:41,569 ! 
2023-05-09 13:05:41,569 ! !!
2023-05-09 13:05:41,570 ! 
2023-05-09 13:05:41,570 ! check.warn(importable)
2023-05-09 13:05:41,570 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.templates' as data is deprecated, please list it in `packages`.
2023-05-09 13:05:41,570 ! !!
2023-05-09 13:05:41,570 ! 
2023-05-09 13:05:41,571 ! 
2023-05-09 13:05:41,571 ! ############################
2023-05-09 13:05:41,571 ! # Package would be ignored #
2023-05-09 13:05:41,571 ! ############################
2023-05-09 13:05:41,571 ! Python recognizes 'octoprint_octolapse.data.templates' as an importable package,
2023-05-09 13:05:41,572 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:05:41,572 ! 
2023-05-09 13:05:41,572 ! 'octoprint_octolapse.data.templates' has been automatically added to the distribution only
2023-05-09 13:05:41,572 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:05:41,572 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:05:41,573 ! 
2023-05-09 13:05:41,573 ! Please make sure that 'octoprint_octolapse.data.templates' is included as a package by using
2023-05-09 13:05:41,573 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:05:41,573 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:05:41,573 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:05:41,574 ! 
2023-05-09 13:05:41,574 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:05:41,574 ! documentation page.
2023-05-09 13:05:41,574 ! 
2023-05-09 13:05:41,574 ! 
2023-05-09 13:05:41,574 ! !!
2023-05-09 13:05:41,575 ! 
2023-05-09 13:05:41,575 ! check.warn(importable)
2023-05-09 13:05:41,575 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.webcam_types' as data is deprecated, please list it in `packages`.
2023-05-09 13:05:41,575 ! !!
2023-05-09 13:05:41,575 ! 
2023-05-09 13:05:41,576 ! 
2023-05-09 13:05:41,576 ! ############################
2023-05-09 13:05:41,576 ! # Package would be ignored #
2023-05-09 13:05:41,576 ! ############################
2023-05-09 13:05:41,576 ! Python recognizes 'octoprint_octolapse.data.webcam_types' as an importable package,
2023-05-09 13:05:41,577 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:05:41,577 ! 
2023-05-09 13:05:41,577 ! 'octoprint_octolapse.data.webcam_types' has been automatically added to the distribution only
2023-05-09 13:05:41,577 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:05:41,577 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:05:41,578 ! 
2023-05-09 13:05:41,578 ! Please make sure that 'octoprint_octolapse.data.webcam_types' is included as a package by using
2023-05-09 13:05:41,578 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:05:41,578 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:05:41,578 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:05:41,579 ! 
2023-05-09 13:05:41,579 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:05:41,579 ! documentation page.
2023-05-09 13:05:41,579 ! 
2023-05-09 13:05:41,579 ! 
2023-05-09 13:05:41,580 ! !!
2023-05-09 13:05:41,580 ! 
2023-05-09 13:05:41,580 ! check.warn(importable)
2023-05-09 13:05:41,580 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.webcam_types.mjpg_streamer' as data is deprecated, please list it in `packages`.
2023-05-09 13:05:41,580 ! !!
2023-05-09 13:05:41,581 ! 
2023-05-09 13:05:41,581 ! 
2023-05-09 13:05:41,581 ! ############################
2023-05-09 13:05:41,581 ! # Package would be ignored #
2023-05-09 13:05:41,581 ! ############################
2023-05-09 13:05:41,582 ! Python recognizes 'octoprint_octolapse.data.webcam_types.mjpg_streamer' as an importable package,
2023-05-09 13:05:41,582 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:05:41,582 ! 
2023-05-09 13:05:41,582 ! 'octoprint_octolapse.data.webcam_types.mjpg_streamer' has been automatically added to the distribution only
2023-05-09 13:05:41,582 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:05:41,583 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:05:41,583 ! 
2023-05-09 13:05:41,583 ! Please make sure that 'octoprint_octolapse.data.webcam_types.mjpg_streamer' is included as a package by using
2023-05-09 13:05:41,583 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:05:41,583 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:05:41,584 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:05:41,584 ! 
2023-05-09 13:05:41,584 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:05:41,584 ! documentation page.
2023-05-09 13:05:41,584 ! 
2023-05-09 13:05:41,585 ! 
2023-05-09 13:05:41,585 ! !!
2023-05-09 13:05:41,585 ! 
2023-05-09 13:05:41,585 ! check.warn(importable)
2023-05-09 13:05:41,585 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.css' as data is deprecated, please list it in `packages`.
2023-05-09 13:05:41,586 ! !!
2023-05-09 13:05:41,586 ! 
2023-05-09 13:05:41,586 ! 
2023-05-09 13:05:41,586 ! ############################
2023-05-09 13:05:41,586 ! # Package would be ignored #
2023-05-09 13:05:41,587 ! ############################
2023-05-09 13:05:41,587 ! Python recognizes 'octoprint_octolapse.static.css' as an importable package,
2023-05-09 13:05:41,587 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:05:41,587 ! 
2023-05-09 13:05:41,587 ! 'octoprint_octolapse.static.css' has been automatically added to the distribution only
2023-05-09 13:05:41,588 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:05:41,588 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:05:41,588 ! 
2023-05-09 13:05:41,588 ! Please make sure that 'octoprint_octolapse.static.css' is included as a package by using
2023-05-09 13:05:41,588 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:05:41,589 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:05:41,589 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:05:41,589 ! 
2023-05-09 13:05:41,589 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:05:41,589 ! documentation page.
2023-05-09 13:05:41,590 ! 
2023-05-09 13:05:41,590 ! 
2023-05-09 13:05:41,590 ! !!
2023-05-09 13:05:41,590 ! 
2023-05-09 13:05:41,590 ! check.warn(importable)
2023-05-09 13:05:41,591 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.docs.help' as data is deprecated, please list it in `packages`.
2023-05-09 13:05:41,591 ! !!
2023-05-09 13:05:41,591 ! 
2023-05-09 13:05:41,591 ! 
2023-05-09 13:05:41,591 ! ############################
2023-05-09 13:05:41,592 ! # Package would be ignored #
2023-05-09 13:05:41,592 ! ############################
2023-05-09 13:05:41,592 ! Python recognizes 'octoprint_octolapse.static.docs.help' as an importable package,
2023-05-09 13:05:41,592 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:05:41,592 ! 
2023-05-09 13:05:41,593 ! 'octoprint_octolapse.static.docs.help' has been automatically added to the distribution only
2023-05-09 13:05:41,593 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:05:41,593 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:05:41,593 ! 
2023-05-09 13:05:41,593 ! Please make sure that 'octoprint_octolapse.static.docs.help' is included as a package by using
2023-05-09 13:05:41,594 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:05:41,594 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:05:41,594 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:05:41,594 ! 
2023-05-09 13:05:41,594 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:05:41,595 ! documentation page.
2023-05-09 13:05:41,595 ! 
2023-05-09 13:05:41,595 ! 
2023-05-09 13:05:41,595 ! !!
2023-05-09 13:05:41,595 ! 
2023-05-09 13:05:41,595 ! check.warn(importable)
2023-05-09 13:05:41,596 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.img' as data is deprecated, please list it in `packages`.
2023-05-09 13:05:41,596 ! !!
2023-05-09 13:05:41,596 ! 
2023-05-09 13:05:41,596 ! 
2023-05-09 13:05:41,597 ! ############################
2023-05-09 13:05:41,597 ! # Package would be ignored #
2023-05-09 13:05:41,597 ! ############################
2023-05-09 13:05:41,597 ! Python recognizes 'octoprint_octolapse.static.img' as an importable package,
2023-05-09 13:05:41,597 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:05:41,597 ! 
2023-05-09 13:05:41,598 ! 'octoprint_octolapse.static.img' has been automatically added to the distribution only
2023-05-09 13:05:41,598 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:05:41,598 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:05:41,598 ! 
2023-05-09 13:05:41,598 ! Please make sure that 'octoprint_octolapse.static.img' is included as a package by using
2023-05-09 13:05:41,599 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:05:41,599 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:05:41,599 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:05:41,599 ! 
2023-05-09 13:05:41,599 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:05:41,600 ! documentation page.
2023-05-09 13:05:41,600 ! 
2023-05-09 13:05:41,600 ! 
2023-05-09 13:05:41,600 ! !!
2023-05-09 13:05:41,600 ! 
2023-05-09 13:05:41,601 ! check.warn(importable)
2023-05-09 13:05:41,601 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.js' as data is deprecated, please list it in `packages`.
2023-05-09 13:05:41,601 ! !!
2023-05-09 13:05:41,601 ! 
2023-05-09 13:05:41,601 ! 
2023-05-09 13:05:41,602 ! ############################
2023-05-09 13:05:41,602 ! # Package would be ignored #
2023-05-09 13:05:41,602 ! ############################
2023-05-09 13:05:41,602 ! Python recognizes 'octoprint_octolapse.static.js' as an importable package,
2023-05-09 13:05:41,602 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:05:41,603 ! 
2023-05-09 13:05:41,603 ! 'octoprint_octolapse.static.js' has been automatically added to the distribution only
2023-05-09 13:05:41,603 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:05:41,603 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:05:41,603 ! 
2023-05-09 13:05:41,603 ! Please make sure that 'octoprint_octolapse.static.js' is included as a package by using
2023-05-09 13:05:41,604 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:05:41,604 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:05:41,604 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:05:41,604 ! 
2023-05-09 13:05:41,605 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:05:41,605 ! documentation page.
2023-05-09 13:05:41,605 ! 
2023-05-09 13:05:41,605 ! 
2023-05-09 13:05:41,605 ! !!
2023-05-09 13:05:41,605 ! 
2023-05-09 13:05:41,606 ! check.warn(importable)
2023-05-09 13:05:41,606 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.js.webcams.mjpg_streamer' as data is deprecated, please list it in `packages`.
2023-05-09 13:05:41,606 ! !!
2023-05-09 13:05:41,606 ! 
2023-05-09 13:05:41,606 ! 
2023-05-09 13:05:41,607 ! ############################
2023-05-09 13:05:41,607 ! # Package would be ignored #
2023-05-09 13:05:41,607 ! ############################
2023-05-09 13:05:41,607 ! Python recognizes 'octoprint_octolapse.static.js.webcams.mjpg_streamer' as an importable package,
2023-05-09 13:05:41,607 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:05:41,608 ! 
2023-05-09 13:05:41,608 ! 'octoprint_octolapse.static.js.webcams.mjpg_streamer' has been automatically added to the distribution only
2023-05-09 13:05:41,608 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:05:41,608 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:05:41,608 ! 
2023-05-09 13:05:41,609 ! Please make sure that 'octoprint_octolapse.static.js.webcams.mjpg_streamer' is included as a package by using
2023-05-09 13:05:41,609 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:05:41,609 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:05:41,609 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:05:41,609 ! 
2023-05-09 13:05:41,610 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:05:41,610 ! documentation page.
2023-05-09 13:05:41,610 ! 
2023-05-09 13:05:41,610 ! 
2023-05-09 13:05:41,610 ! !!
2023-05-09 13:05:41,610 ! 
2023-05-09 13:05:41,611 ! check.warn(importable)
2023-05-09 13:05:41,611 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.templates' as data is deprecated, please list it in `packages`.
2023-05-09 13:05:41,611 ! !!
2023-05-09 13:05:41,611 ! 
2023-05-09 13:05:41,611 ! 
2023-05-09 13:05:41,612 ! ############################
2023-05-09 13:05:41,612 ! # Package would be ignored #
2023-05-09 13:05:41,612 ! ############################
2023-05-09 13:05:41,612 ! Python recognizes 'octoprint_octolapse.templates' as an importable package,
2023-05-09 13:05:41,612 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:05:41,613 ! 
2023-05-09 13:05:41,613 ! 'octoprint_octolapse.templates' has been automatically added to the distribution only
2023-05-09 13:05:41,613 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:05:41,613 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:05:41,613 ! 
2023-05-09 13:05:41,614 ! Please make sure that 'octoprint_octolapse.templates' is included as a package by using
2023-05-09 13:05:41,614 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:05:41,614 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:05:41,614 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:05:41,614 ! 
2023-05-09 13:05:41,615 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:05:41,615 ! documentation page.
2023-05-09 13:05:41,615 ! 
2023-05-09 13:05:41,615 ! 
2023-05-09 13:05:41,615 ! !!
2023-05-09 13:05:41,616 ! 
2023-05-09 13:05:41,616 ! check.warn(importable)
2023-05-09 13:05:41,616 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.templates.webcams.mjpg_streamer' as data is deprecated, please list it in `packages`.
2023-05-09 13:05:41,616 ! !!
2023-05-09 13:05:41,616 ! 
2023-05-09 13:05:41,617 ! 
2023-05-09 13:05:41,617 ! ############################
2023-05-09 13:05:41,617 ! # Package would be ignored #
2023-05-09 13:05:41,617 ! ############################
2023-05-09 13:05:41,617 ! Python recognizes 'octoprint_octolapse.templates.webcams.mjpg_streamer' as an importable package,
2023-05-09 13:05:41,618 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:05:41,618 ! 
2023-05-09 13:05:41,618 ! 'octoprint_octolapse.templates.webcams.mjpg_streamer' has been automatically added to the distribution only
2023-05-09 13:05:41,618 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:05:41,618 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:05:41,619 ! 
2023-05-09 13:05:41,619 ! Please make sure that 'octoprint_octolapse.templates.webcams.mjpg_streamer' is included as a package by using
2023-05-09 13:05:41,619 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:05:41,619 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:05:41,619 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:05:41,619 ! 
2023-05-09 13:05:41,620 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:05:41,620 ! documentation page.
2023-05-09 13:05:41,620 ! 
2023-05-09 13:05:41,620 ! 
2023-05-09 13:05:41,620 ! !!
2023-05-09 13:05:41,621 ! 
2023-05-09 13:05:41,621 ! check.warn(importable)
2023-05-09 13:05:41,621 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:05:41,621 ! copying octoprint_octolapse/data/settings_default_0.3.3rc3.dev0.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:05:41,621 ! copying octoprint_octolapse/data/settings_default_0.4.0.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:05:41,622 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev0.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:05:41,622 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev2.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:05:41,622 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev3.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:05:41,622 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev4.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:05:41,622 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev5.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:05:41,623 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:05:41,623 ! copying octoprint_octolapse/data/settings_default_0.4.0rc2.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:05:41,623 ! copying octoprint_octolapse/data/settings_default_0.4.0rc3.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:05:41,623 ! copying octoprint_octolapse/data/settings_default_current.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:05:41,623 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 13:05:41,624 ! copying octoprint_octolapse/data/Images/no-camera-selected.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 13:05:41,624 ! copying octoprint_octolapse/data/Images/no-image-available.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 13:05:41,624 ! copying octoprint_octolapse/data/Images/no_snapshot.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 13:05:41,624 ! copying octoprint_octolapse/data/Images/test-snapshot-image.jpg -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 13:05:41,624 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/fonts
2023-05-09 13:05:41,625 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/fonts/DejaVu
2023-05-09 13:05:41,625 ! copying octoprint_octolapse/data/fonts/DejaVu/DejaVuSansMono.ttf -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/fonts/DejaVu
2023-05-09 13:05:41,625 ! copying octoprint_octolapse/data/fonts/DejaVu/license.txt -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/fonts/DejaVu
2023-05-09 13:05:41,625 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib
2023-05-09 13:05:41,625 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:05:41,626 ! copying octoprint_octolapse/data/lib/c/extruder.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:05:41,626 ! copying octoprint_octolapse/data/lib/c/extruder.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:05:41,626 ! copying octoprint_octolapse/data/lib/c/gcode_comment_processor.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:05:41,626 ! copying octoprint_octolapse/data/lib/c/gcode_comment_processor.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:05:41,626 ! copying octoprint_octolapse/data/lib/c/gcode_parser.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:05:41,626 ! copying octoprint_octolapse/data/lib/c/gcode_parser.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:05:41,627 ! copying octoprint_octolapse/data/lib/c/gcode_position.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:05:41,627 ! copying octoprint_octolapse/data/lib/c/gcode_position.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:05:41,627 ! copying octoprint_octolapse/data/lib/c/gcode_position_processor.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:05:41,627 ! copying octoprint_octolapse/data/lib/c/gcode_position_processor.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:05:41,627 ! copying octoprint_octolapse/data/lib/c/logging.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:05:41,627 ! copying octoprint_octolapse/data/lib/c/logging.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:05:41,628 ! copying octoprint_octolapse/data/lib/c/parsed_command.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:05:41,628 ! copying octoprint_octolapse/data/lib/c/parsed_command.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:05:41,628 ! copying octoprint_octolapse/data/lib/c/parsed_command_parameter.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:05:41,628 ! copying octoprint_octolapse/data/lib/c/parsed_command_parameter.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:05:41,628 ! copying octoprint_octolapse/data/lib/c/position.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:05:41,629 ! copying octoprint_octolapse/data/lib/c/position.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:05:41,629 ! copying octoprint_octolapse/data/lib/c/python_helpers.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:05:41,629 ! copying octoprint_octolapse/data/lib/c/python_helpers.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:05:41,629 ! copying octoprint_octolapse/data/lib/c/snapshot_plan.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:05:41,629 ! copying octoprint_octolapse/data/lib/c/snapshot_plan.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:05:41,629 ! copying octoprint_octolapse/data/lib/c/snapshot_plan_step.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:05:41,630 ! copying octoprint_octolapse/data/lib/c/snapshot_plan_step.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:05:41,630 ! copying octoprint_octolapse/data/lib/c/stabilization.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:05:41,630 ! copying octoprint_octolapse/data/lib/c/stabilization.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:05:41,630 ! copying octoprint_octolapse/data/lib/c/stabilization_results.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:05:41,630 ! copying octoprint_octolapse/data/lib/c/stabilization_results.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:05:41,630 ! copying octoprint_octolapse/data/lib/c/stabilization_smart_gcode.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:05:41,631 ! copying octoprint_octolapse/data/lib/c/stabilization_smart_gcode.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:05:41,631 ! copying octoprint_octolapse/data/lib/c/stabilization_smart_layer.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:05:41,631 ! copying octoprint_octolapse/data/lib/c/stabilization_smart_layer.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:05:41,631 ! copying octoprint_octolapse/data/lib/c/stabilization_snap_to_print.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:05:41,631 ! copying octoprint_octolapse/data/lib/c/stabilization_snap_to_print.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:05:41,631 ! copying octoprint_octolapse/data/lib/c/trigger_position.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:05:41,632 ! copying octoprint_octolapse/data/lib/c/trigger_position.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:05:41,632 ! copying octoprint_octolapse/data/lib/c/utilities.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:05:41,632 ! copying octoprint_octolapse/data/lib/c/utilities.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:05:41,632 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts
2023-05-09 13:05:41,632 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode
2023-05-09 13:05:41,633 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:05:41,633 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:05:41,633 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_02_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:05:41,633 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_03_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:05:41,633 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_04_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:05:41,633 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_05_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:05:41,634 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_06_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:05:41,634 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_07_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:05:41,634 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_08_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:05:41,634 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:05:41,634 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:05:41,634 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_02_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:05:41,635 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_03_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:05:41,635 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_04_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:05:41,635 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_05_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:05:41,635 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_06_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:05:41,635 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_07_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:05:41,635 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_08_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:05:41,636 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:05:41,636 ! copying octoprint_octolapse/data/scripts/linux/capture_image_leave_on_camera.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:05:41,636 ! copying octoprint_octolapse/data/scripts/linux/download-from-camera-and-rename.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:05:41,636 ! copying octoprint_octolapse/data/scripts/linux/initialize_dslr.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:05:41,636 ! copying octoprint_octolapse/data/scripts/linux/move_snapshots_to_target.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:05:41,636 ! copying octoprint_octolapse/data/scripts/linux/take_snapshot_and_download.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:05:41,637 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/windows
2023-05-09 13:05:41,637 ! copying octoprint_octolapse/data/scripts/windows/take_snapshot_and_download.bat -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/windows
2023-05-09 13:05:41,637 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/templates
2023-05-09 13:05:41,637 ! copying octoprint_octolapse/data/templates/cura_gcode_settings_template.txt -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/templates
2023-05-09 13:05:41,637 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types
2023-05-09 13:05:41,638 ! copying octoprint_octolapse/data/webcam_types/camera_types.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types
2023-05-09 13:05:41,638 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:05:41,638 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/logitech_c250.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:05:41,638 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/logitech_c920.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:05:41,638 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/logitech_c920_2.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:05:41,638 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/logitech_c920_3.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:05:41,639 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/raspi_cam_v2.1.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:05:41,639 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/raspi_cam_v2.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:05:41,639 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static
2023-05-09 13:05:41,639 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/css
2023-05-09 13:05:41,639 ! copying octoprint_octolapse/static/css/jquery.minicolors.css -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/css
2023-05-09 13:05:41,639 ! copying octoprint_octolapse/static/css/jquery.minicolors.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/css
2023-05-09 13:05:41,640 ! copying octoprint_octolapse/static/css/octolapse.css -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/css
2023-05-09 13:05:41,640 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs
2023-05-09 13:05:41,640 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,640 ! copying octoprint_octolapse/static/docs/help/dialog.renderings.in_process.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,640 ! copying octoprint_octolapse/static/docs/help/dialog.renderings.unfinished.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,640 ! copying octoprint_octolapse/static/docs/help/dialog.timelapse_files.snapshot_archive.import.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,641 ! copying octoprint_octolapse/static/docs/help/dialog.timelapse_files.snapshot_archive.tab.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,641 ! copying octoprint_octolapse/static/docs/help/dialog.timelapse_files.timelapse.tab.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,641 ! copying octoprint_octolapse/static/docs/help/error_help_error_not_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,641 ! copying octoprint_octolapse/static/docs/help/error_help_init_automatic_slicer_no_settings_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,641 ! copying octoprint_octolapse/static/docs/help/error_help_init_automatic_slicer_settings_missing.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,642 ! copying octoprint_octolapse/static/docs/help/error_help_init_before_print_start_camera_script_apply_failed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,642 ! copying octoprint_octolapse/static/docs/help/error_help_init_camera_init_test_failed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,642 ! copying octoprint_octolapse/static/docs/help/error_help_init_camera_settings_apply_failed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,642 ! copying octoprint_octolapse/static/docs/help/error_help_init_cant_print_from_sd.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,642 ! copying octoprint_octolapse/static/docs/help/error_help_init_directory_test_failed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,642 ! copying octoprint_octolapse/static/docs/help/error_help_init_ffmpeg_not_found_at_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,643 ! copying octoprint_octolapse/static/docs/help/error_help_init_ffmpeg_path_not_set.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,643 ! copying octoprint_octolapse/static/docs/help/error_help_init_ffmpeg_path_retrieve_exception.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,643 ! copying octoprint_octolapse/static/docs/help/error_help_init_incorrect_octoprint_version.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,643 ! copying octoprint_octolapse/static/docs/help/error_help_init_incorrect_print_start_state.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,643 ! copying octoprint_octolapse/static/docs/help/error_help_init_m114_not_supported.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,643 ! copying octoprint_octolapse/static/docs/help/error_help_init_manual_slicer_settings_missing.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,644 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_current_job_data_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,644 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_current_job_file_data_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,644 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_enabled_cameras.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,644 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_gcode_filepath_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,644 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_printer_profile_exists.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,644 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_printer_profile_selected.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,645 ! copying octoprint_octolapse/static/docs/help/error_help_init_octolapse_is_disabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,645 ! copying octoprint_octolapse/static/docs/help/error_help_init_overlay_font_path_not_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,645 ! copying octoprint_octolapse/static/docs/help/error_help_init_printer_not_configured.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,645 ! copying octoprint_octolapse/static/docs/help/error_help_init_rendering_file_template_invalid.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,645 ! copying octoprint_octolapse/static/docs/help/error_help_init_timelapse_start_exception.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,646 ! copying octoprint_octolapse/static/docs/help/error_help_init_too_few_extruders_defined.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,646 ! copying octoprint_octolapse/static/docs/help/error_help_init_too_few_extruders_offsets_defined.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,646 ! copying octoprint_octolapse/static/docs/help/error_help_init_unable_to_accept_snapshot_plan.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,646 ! copying octoprint_octolapse/static/docs/help/error_help_init_unexpected_exception.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,646 ! copying octoprint_octolapse/static/docs/help/error_help_init_unknown_file_origin.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,646 ! copying octoprint_octolapse/static/docs/help/error_help_not_a_valid_error_dict.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,647 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_axis_mode_e_unknown.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,647 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_axis_mode_xyz_unknown.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,647 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_incorrect_trigger_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,647 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_no_definite_position.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,647 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_no_metric_units.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,647 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_no_snapshot_commands_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,648 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_no_snapshot_plans_returned.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,648 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_printer_not_primed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,648 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_unhandled_exception.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,648 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_unknown_trigger_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,648 ! copying octoprint_octolapse/static/docs/help/error_help_rendering_archive_import_no_files_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,648 ! copying octoprint_octolapse/static/docs/help/error_help_rendering_archive_import_zip_file_corrupt.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,649 ! copying octoprint_octolapse/static/docs/help/error_help_rendering_archive_import_zip_file_too_large.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,649 ! copying octoprint_octolapse/static/docs/help/error_help_settings_slicer_simplify3d_duplicate_toolhead_numbers.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,649 ! copying octoprint_octolapse/static/docs/help/error_help_settings_slicer_simplify3d_extruder_count_mismatch.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,649 ! copying octoprint_octolapse/static/docs/help/error_help_settings_slicer_simplify3d_max_extruder_count_exceeded.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,649 ! copying octoprint_octolapse/static/docs/help/error_help_settings_slicer_simplify3d_unexpected_max_toolhead_number.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,650 ! copying octoprint_octolapse/static/docs/help/error_help_timelapse_cannot_aquire_job_lock.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,650 ! copying octoprint_octolapse/static/docs/help/main_settings.auto_reload_frames.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,650 ! copying octoprint_octolapse/static/docs/help/main_settings.auto_reload_latest_snapshot.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,650 ! copying octoprint_octolapse/static/docs/help/main_settings.automatic_update_interval_days.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,650 ! copying octoprint_octolapse/static/docs/help/main_settings.automatic_updates_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,650 ! copying octoprint_octolapse/static/docs/help/main_settings.cancel_print_on_startup_error.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,651 ! copying octoprint_octolapse/static/docs/help/main_settings.enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,651 ! copying octoprint_octolapse/static/docs/help/main_settings.is_test_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,651 ! copying octoprint_octolapse/static/docs/help/main_settings.preview_snapshot_plan_autoclose.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,651 ! copying octoprint_octolapse/static/docs/help/main_settings.preview_snapshot_plan_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,651 ! copying octoprint_octolapse/static/docs/help/main_settings.preview_snapshot_plans.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,651 ! copying octoprint_octolapse/static/docs/help/main_settings.show_extruder_state_changes.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,652 ! copying octoprint_octolapse/static/docs/help/main_settings.show_navbar_icon.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,652 ! copying octoprint_octolapse/static/docs/help/main_settings.show_navbar_when_not_printing.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,652 ! copying octoprint_octolapse/static/docs/help/main_settings.show_position_changes.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,652 ! copying octoprint_octolapse/static/docs/help/main_settings.show_printer_state_changes.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,652 ! copying octoprint_octolapse/static/docs/help/main_settings.show_snapshot_plan_information.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,653 ! copying octoprint_octolapse/static/docs/help/main_settings.show_trigger_state_changes.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,653 ! copying octoprint_octolapse/static/docs/help/main_settings.snapshot_archive_directory.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,653 ! copying octoprint_octolapse/static/docs/help/main_settings.temporary_directory.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,653 ! copying octoprint_octolapse/static/docs/help/main_settings.timelapse_directory.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,653 ! copying octoprint_octolapse/static/docs/help/profiles.camera.apply_settings_at_startup.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,653 ! copying octoprint_octolapse/static/docs/help/profiles.camera.apply_settings_before_print.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,654 ! copying octoprint_octolapse/static/docs/help/profiles.camera.apply_settings_when_disabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,654 ! copying octoprint_octolapse/static/docs/help/profiles.camera.camera_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,654 ! copying octoprint_octolapse/static/docs/help/profiles.camera.delay.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,654 ! copying octoprint_octolapse/static/docs/help/profiles.camera.edit_cutsom_image_preferences.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,654 ! copying octoprint_octolapse/static/docs/help/profiles.camera.external_camera_snapshot_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,654 ! copying octoprint_octolapse/static/docs/help/profiles.camera.gcode_camera_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,655 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_after_render_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,655 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_after_snapshot_gcode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,655 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_after_snapshot_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,655 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_before_render_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,655 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_before_snapshot_gcode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,656 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_before_snapshot_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,656 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_print_end_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,656 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_print_start_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,656 ! copying octoprint_octolapse/static/docs/help/profiles.camera.snapshot_transpose.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,656 ! copying octoprint_octolapse/static/docs/help/profiles.camera.stream_template.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,656 ! copying octoprint_octolapse/static/docs/help/profiles.camera.timeout_ms.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,657 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.address.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,657 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.enable_custom_image_preferences.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,657 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.ignore_ssl_error.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,657 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.1.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,657 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029518.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,658 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029519.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,658 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029538.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,658 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029670.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,658 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029671.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,658 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029675.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,658 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094849.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,659 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094850.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,659 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094851.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,659 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094856.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,659 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094857.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,659 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094858.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,659 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094860.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,660 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094861.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,660 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094867.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,660 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094868.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,660 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094870.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,660 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094871.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,661 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094872.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,661 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094873.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,661 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094874.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,661 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10291459.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,661 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963776.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,661 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963777.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,662 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963778.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,662 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963788.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,662 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963790.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,662 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963791.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,662 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963795.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,662 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963796.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,663 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963797.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,663 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963800.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,663 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963802.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,663 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963803.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,663 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963804.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,663 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963807.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,664 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963810.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,664 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963818.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,664 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.password.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,664 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.snapshot_request_template.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,664 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.stream_download.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,665 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.username.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,665 ! copying octoprint_octolapse/static/docs/help/profiles.library.is_custom.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,665 ! copying octoprint_octolapse/static/docs/help/profiles.logging.enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,665 ! copying octoprint_octolapse/static/docs/help/profiles.logging.log_all_errors.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,665 ! copying octoprint_octolapse/static/docs/help/profiles.logging.log_to_console.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,665 ! copying octoprint_octolapse/static/docs/help/profiles.logging.logging_level.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,666 ! copying octoprint_octolapse/static/docs/help/profiles.logging.manage_log_files.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,666 ! copying octoprint_octolapse/static/docs/help/profiles.logging.modules_to_log.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,666 ! copying octoprint_octolapse/static/docs/help/profiles.printer.auto_detect_position.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,666 ! copying octoprint_octolapse/static/docs/help/profiles.printer.auto_position_detection_commands.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,666 ! copying octoprint_octolapse/static/docs/help/profiles.printer.automatic_configuration.is_automatic.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,666 ! copying octoprint_octolapse/static/docs/help/profiles.printer.automatic_configuration.make.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,667 ! copying octoprint_octolapse/static/docs/help/profiles.printer.automatic_configuration.model.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,667 ! copying octoprint_octolapse/static/docs/help/profiles.printer.bed_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,667 ! copying octoprint_octolapse/static/docs/help/profiles.printer.custom_bounding_box.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,667 ! copying octoprint_octolapse/static/docs/help/profiles.printer.default_extruder.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,667 ! copying octoprint_octolapse/static/docs/help/profiles.printer.default_firmware_retractions.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,667 ! copying octoprint_octolapse/static/docs/help/profiles.printer.default_firmware_retractions_zhop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,668 ! copying octoprint_octolapse/static/docs/help/profiles.printer.e_axis_default_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,668 ! copying octoprint_octolapse/static/docs/help/profiles.printer.extruder_offsets.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,668 ! copying octoprint_octolapse/static/docs/help/profiles.printer.g90_influences_extruder.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,668 ! copying octoprint_octolapse/static/docs/help/profiles.printer.gocde_axis_compatibility_mode_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,668 ! copying octoprint_octolapse/static/docs/help/profiles.printer.home_axis_gcode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,669 ! copying octoprint_octolapse/static/docs/help/profiles.printer.invert_e.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,669 ! copying octoprint_octolapse/static/docs/help/profiles.printer.invert_x.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,669 ! copying octoprint_octolapse/static/docs/help/profiles.printer.invert_y.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,669 ! copying octoprint_octolapse/static/docs/help/profiles.printer.invert_z.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,669 ! copying octoprint_octolapse/static/docs/help/profiles.printer.minimum_layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,669 ! copying octoprint_octolapse/static/docs/help/profiles.printer.num_extruders.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,670 ! copying octoprint_octolapse/static/docs/help/profiles.printer.origin_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,670 ! copying octoprint_octolapse/static/docs/help/profiles.printer.override_octoprint_profile_settings.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,670 ! copying octoprint_octolapse/static/docs/help/profiles.printer.priming_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,670 ! copying octoprint_octolapse/static/docs/help/profiles.printer.restrict_snapshot_area.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,670 ! copying octoprint_octolapse/static/docs/help/profiles.printer.shared_extruder.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,670 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicer_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,671 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.automatic.continue_on_failure.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,671 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.automatic.disable_automatic_save.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,671 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.4_2.speed_z_hop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,671 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,671 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.max_feedrate_z_override.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,671 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_amount.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,672 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_enable.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,672 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_hop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,672 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_hop_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,672 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_prime_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,672 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_retract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,673 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.smooth_spiralized_contours.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,673 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.speed_travel.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,673 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.axis_speed_display_unit_options.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,673 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.deretract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,673 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,673 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.retract_before_move.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,674 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.retract_length.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,674 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.retract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,674 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.travel_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,674 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.vase_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,674 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.z_hop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,674 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.z_travel_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,675 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.extruder_use_retract.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,675 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,675 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.retraction_distance.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,675 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.retraction_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,675 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.retraction_vertical_lift.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,675 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.vase_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,676 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.x_y_axis_movement_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,676 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.z_axis_movement_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,676 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.deretract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,676 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,676 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.retract_length.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,676 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.retract_lift.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,677 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.retract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,677 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.travel_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,677 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.vase_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,677 ! copying octoprint_octolapse/static/docs/help/profiles.printer.snapshot_command.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,677 ! copying octoprint_octolapse/static/docs/help/profiles.printer.suppress_snapshot_command_always.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,678 ! copying octoprint_octolapse/static/docs/help/profiles.printer.units_default.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,678 ! copying octoprint_octolapse/static/docs/help/profiles.printer.xyz_axes_default_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,678 ! copying octoprint_octolapse/static/docs/help/profiles.printer.zero_based_extruder.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,678 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.archive_snapshots.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,678 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.bitrate.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,678 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.constant_rate_factor.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,679 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.enable_watermark.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,679 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,679 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.fps.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,679 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.fps_calculation_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,679 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.max_fps.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,679 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.min_fps.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,680 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.output_format.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,680 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.output_template.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,680 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_font_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,680 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_font_size.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,680 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_outline_color.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,681 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_outline_width.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,681 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_preview.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,681 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_alignment.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,681 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_color.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,681 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_halign.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,681 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_pos_xy.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,682 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_template.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,682 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_template_current_time.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,682 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_template_time_elapsed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,682 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_valign.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,682 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.post_roll_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,683 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.pre_roll_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,683 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.run_length_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,683 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.thread_count.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,683 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.wait_for_moves_to_finish.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,683 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_fixed_coordinate.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,683 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_fixed_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,684 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_fixed_path_invert_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,684 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_fixed_path_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,684 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_relative.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,684 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_relative_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,684 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_relative_path_invert_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,684 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_relative_path_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,685 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,685 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_fixed_coordinate.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,685 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_fixed_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,685 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_fixed_path_invert_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,685 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_fixed_path_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,686 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_relative.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,686 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_relative_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,686 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_relative_path_invert_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,686 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_relative_path_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,686 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,686 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.calculate_intersections.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,687 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.extruder_state_requirements_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,687 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.layer_trigger_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,687 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.position_restriction_shape.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,687 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.position_restriction_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,687 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.position_restrictions_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,687 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.require_zhop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,688 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.smart_layer_disable_z_lift.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,688 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.smart_layer_snap_to_print_high_quality.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,688 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.smart_layer_snap_to_print_smooth.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,688 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.smart_layer_trigger_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,688 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.timer_trigger_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,688 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.trigger_subtype.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,689 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.trigger_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,689 ! copying octoprint_octolapse/static/docs/help/quality_issues_fast_trigger.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,689 ! copying octoprint_octolapse/static/docs/help/quality_issues_low_quality_snap_to_print.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,689 ! copying octoprint_octolapse/static/docs/help/quality_issues_no_print_features_detected.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,689 ! copying octoprint_octolapse/static/docs/help/settings.import.import_method.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,690 ! copying octoprint_octolapse/static/docs/help/settings.import.import_text.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,690 ! copying octoprint_octolapse/static/docs/help/snapshot_plan_missed_snapshots.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:05:41,690 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/img
2023-05-09 13:05:41,690 ! copying octoprint_octolapse/static/img/watermark.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/img
2023-05-09 13:05:41,690 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:05:41,690 ! copying octoprint_octolapse/static/js/jquery.minicolors.min.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:05:41,691 ! copying octoprint_octolapse/static/js/jquery.validate.min.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:05:41,691 ! copying octoprint_octolapse/static/js/octolapse.dialog.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:05:41,691 ! copying octoprint_octolapse/static/js/octolapse.dialog.renderings.in_process.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:05:41,691 ! copying octoprint_octolapse/static/js/octolapse.dialog.renderings.unfinished.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:05:41,691 ! copying octoprint_octolapse/static/js/octolapse.dialog.timelapse_files.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:05:41,691 ! copying octoprint_octolapse/static/js/octolapse.file_browser.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:05:41,692 ! copying octoprint_octolapse/static/js/octolapse.help.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:05:41,692 ! copying octoprint_octolapse/static/js/octolapse.helpers.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:05:41,692 ! copying octoprint_octolapse/static/js/octolapse.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:05:41,692 ! copying octoprint_octolapse/static/js/octolapse.profiles.camera.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:05:41,692 ! copying octoprint_octolapse/static/js/octolapse.profiles.camera.webcam.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:05:41,692 ! copying octoprint_octolapse/static/js/octolapse.profiles.camera.webcam.mjpg_streamer.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:05:41,693 ! copying octoprint_octolapse/static/js/octolapse.profiles.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:05:41,693 ! copying octoprint_octolapse/static/js/octolapse.profiles.library.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:05:41,693 ! copying octoprint_octolapse/static/js/octolapse.profiles.logging.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:05:41,693 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:05:41,693 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.slicer.cura.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:05:41,694 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.slicer.other.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:05:41,694 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.slicer.simplify_3d.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:05:41,694 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.slicer.slic3r_pe.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:05:41,694 ! copying octoprint_octolapse/static/js/octolapse.profiles.rendering.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:05:41,694 ! copying octoprint_octolapse/static/js/octolapse.profiles.stabilization.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:05:41,694 ! copying octoprint_octolapse/static/js/octolapse.profiles.trigger.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:05:41,695 ! copying octoprint_octolapse/static/js/octolapse.settings.import.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:05:41,695 ! copying octoprint_octolapse/static/js/octolapse.settings.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:05:41,695 ! copying octoprint_octolapse/static/js/octolapse.settings.main.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:05:41,695 ! copying octoprint_octolapse/static/js/octolapse.status.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:05:41,695 ! copying octoprint_octolapse/static/js/octolapse.status.snapshotplan.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:05:41,695 ! copying octoprint_octolapse/static/js/octolapse.status.snapshotplan_preview.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:05:41,696 ! copying octoprint_octolapse/static/js/showdown.min.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:05:41,696 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js/webcams
2023-05-09 13:05:41,696 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js/webcams/mjpg_streamer
2023-05-09 13:05:41,696 ! copying octoprint_octolapse/static/js/webcams/mjpg_streamer/raspi_cam_v2.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js/webcams/mjpg_streamer
2023-05-09 13:05:41,696 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:05:41,696 ! copying octoprint_octolapse/templates/octolapse_dialog.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:05:41,697 ! copying octoprint_octolapse/templates/octolapse_dialog_rendering_in_process.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:05:41,697 ! copying octoprint_octolapse/templates/octolapse_dialog_rendering_unfinished.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:05:41,697 ! copying octoprint_octolapse/templates/octolapse_dialog_timelapse_files.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:05:41,697 ! copying octoprint_octolapse/templates/octolapse_file_browser.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:05:41,697 ! copying octoprint_octolapse/templates/octolapse_helpers.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:05:41,697 ! copying octoprint_octolapse/templates/octolapse_navbar.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:05:41,698 ! copying octoprint_octolapse/templates/octolapse_profile_dialog_add_edit.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:05:41,698 ! copying octoprint_octolapse/templates/octolapse_profiles.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:05:41,698 ! copying octoprint_octolapse/templates/octolapse_profiles_camera.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:05:41,698 ! copying octoprint_octolapse/templates/octolapse_profiles_camera_webcam.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:05:41,698 ! copying octoprint_octolapse/templates/octolapse_profiles_camera_webcam_mjpg_streamer.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:05:41,698 ! copying octoprint_octolapse/templates/octolapse_profiles_library.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:05:41,699 ! copying octoprint_octolapse/templates/octolapse_profiles_logging.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:05:41,699 ! copying octoprint_octolapse/templates/octolapse_profiles_printer.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:05:41,699 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_automatic.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:05:41,699 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_automatic.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:05:41,699 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_cura.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:05:41,699 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_cura_4.2.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:05:41,700 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_other.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:05:41,700 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_simplify3d.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:05:41,700 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_slic3r_pe.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:05:41,700 ! copying octoprint_octolapse/templates/octolapse_profiles_rendering.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:05:41,700 ! copying octoprint_octolapse/templates/octolapse_profiles_stabilization.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:05:41,701 ! copying octoprint_octolapse/templates/octolapse_profiles_trigger.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:05:41,701 ! copying octoprint_octolapse/templates/octolapse_settings.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:05:41,701 ! copying octoprint_octolapse/templates/octolapse_settings_import.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:05:41,701 ! copying octoprint_octolapse/templates/octolapse_settings_main.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:05:41,701 ! copying octoprint_octolapse/templates/octolapse_snapshot_plan.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:05:41,701 ! copying octoprint_octolapse/templates/octolapse_status_extruder.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:05:41,702 ! copying octoprint_octolapse/templates/octolapse_status_position.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:05:41,702 ! copying octoprint_octolapse/templates/octolapse_status_printer_state.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:05:41,702 ! copying octoprint_octolapse/templates/octolapse_status_snapshot_plan.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:05:41,702 ! copying octoprint_octolapse/templates/octolapse_status_triggers.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:05:41,702 ! copying octoprint_octolapse/templates/octolapse_tab.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:05:41,702 ! copying octoprint_octolapse/templates/octolapse_tab_latest_snapshot.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:05:41,703 ! copying octoprint_octolapse/templates/octolapse_tab_settings_current.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:05:41,703 ! copying octoprint_octolapse/templates/octolapse_tab_settings_current_cameras.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:05:41,703 ! copying octoprint_octolapse/templates/octolapse_tab_snapshot_plan_preview_popup.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:05:41,703 ! copying octoprint_octolapse/templates/octolapse_tab_webcam_settings_popup.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:05:41,703 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams
2023-05-09 13:05:41,704 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams/mjpg_streamer
2023-05-09 13:05:41,704 ! copying octoprint_octolapse/templates/webcams/mjpg_streamer/logitech_c250.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams/mjpg_streamer
2023-05-09 13:05:41,704 ! copying octoprint_octolapse/templates/webcams/mjpg_streamer/logitech_c920.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams/mjpg_streamer
2023-05-09 13:05:41,704 ! copying octoprint_octolapse/templates/webcams/mjpg_streamer/raspi_cam_v2.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams/mjpg_streamer
2023-05-09 13:05:41,704 ! UPDATING build/lib.linux-aarch64-cpython-310/octoprint_octolapse/_version.py
2023-05-09 13:05:41,704 ! set build/lib.linux-aarch64-cpython-310/octoprint_octolapse/_version.py to 'v0.4.2'
2023-05-09 13:05:41,705 ! running build_ext
2023-05-09 13:05:41,705 ! Compiling Octolapse Parser Extension with <distutils.unixccompiler.UnixCCompiler object at 0x7a4603cac0>.
2023-05-09 13:05:41,705 ! building 'GcodePositionProcessor' extension
2023-05-09 13:05:41,705 ! creating build/temp.linux-aarch64-cpython-310
2023-05-09 13:05:41,705 ! creating build/temp.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:05:41,705 ! creating build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:05:41,706 ! creating build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib
2023-05-09 13:05:41,706 ! creating build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:05:41,706 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/extruder.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/extruder.o -O3 -std=c++11
2023-05-09 13:05:41,706 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/gcode_comment_processor.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/gcode_comment_processor.o -O3 -std=c++11
2023-05-09 13:05:41,706 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.cpp: In member function 'void gcode_comment_processor::update_feature_from_section(position&) const':
2023-05-09 13:05:41,706 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.cpp:99:16: warning: enumeration value 'section_type_no_section' not handled in switch [-Wswitch]
2023-05-09 13:05:41,706 ! 99 |         switch (current_section_)
2023-05-09 13:05:41,707 ! |                ^
2023-05-09 13:05:41,707 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/gcode_parser.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/gcode_parser.o -O3 -std=c++11
2023-05-09 13:05:41,707 ! octoprint_octolapse/data/lib/c/gcode_parser.cpp: In member function 'bool gcode_parser::try_parse_gcode(const char*, parsed_command&)':
2023-05-09 13:05:41,707 ! octoprint_octolapse/data/lib/c/gcode_parser.cpp:148:47: warning: suggest parentheses around '&&' within '||' [-Wparentheses]
2023-05-09 13:05:41,707 ! 148 |     else if (cur_char > 32 || cur_char == ' ' && has_seen_character)
2023-05-09 13:05:41,707 ! |                               ~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:05:41,708 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/gcode_position.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/gcode_position.o -O3 -std=c++11
2023-05-09 13:05:41,708 ! octoprint_octolapse/data/lib/c/gcode_position.cpp: In member function 'void gcode_position::add_position(position&)':
2023-05-09 13:05:41,708 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:395:12: warning: operation on '((gcode_position*)this)->gcode_position::cur_pos_' may be undefined [-Wsequence-point]
2023-05-09 13:05:41,708 ! 395 |   cur_pos_ = (++cur_pos_) % NUM_POSITIONS;
2023-05-09 13:05:41,708 ! octoprint_octolapse/data/lib/c/gcode_position.cpp: In member function 'void gcode_position::add_position(parsed_command&)':
2023-05-09 13:05:41,708 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:402:12: warning: operation on '((gcode_position*)this)->gcode_position::cur_pos_' may be undefined [-Wsequence-point]
2023-05-09 13:05:41,708 ! 402 |   cur_pos_ = (++cur_pos_) % NUM_POSITIONS;
2023-05-09 13:05:41,709 ! octoprint_octolapse/data/lib/c/gcode_position.cpp: In member function 'void gcode_position::update(parsed_command&, long int, long int, long int)':
2023-05-09 13:05:41,709 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:659:31: warning: comparison of integer expressions of different signedness: 'const unsigned int' and 'int' [-Wsign-compare]
2023-05-09 13:05:41,709 ! 659 |                 if (increment > p_current_pos->height_increment && increment > 1)
2023-05-09 13:05:41,709 ! |                     ~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:05:41,709 ! octoprint_octolapse/data/lib/c/gcode_position.cpp: In member function 'void gcode_position::process_g10(position*, parsed_command&)':
2023-05-09 13:05:41,709 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:952:10: warning: variable 's' set but not used [-Wunused-but-set-variable]
2023-05-09 13:05:41,710 ! 952 |   double s = 0;
2023-05-09 13:05:41,710 ! |          ^
2023-05-09 13:05:41,710 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:953:8: warning: variable 'has_s' set but not used [-Wunused-but-set-variable]
2023-05-09 13:05:41,710 ! 953 |   bool has_s = false;
2023-05-09 13:05:41,710 ! |        ^~~~~
2023-05-09 13:05:41,710 ! In file included from octoprint_octolapse/data/lib/c/gcode_position.h:29,
2023-05-09 13:05:41,710 ! from octoprint_octolapse/data/lib/c/gcode_position.cpp:22:
2023-05-09 13:05:41,711 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h: At global scope:
2023-05-09 13:05:41,711 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:77:20: warning: 'SLICER_PE_SKIRT_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:05:41,711 ! 77 | static const char* SLICER_PE_SKIRT_COMMENTS[] = {"skirt", "move to first skirt point", NULL};
2023-05-09 13:05:41,711 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:05:41,711 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:73:20: warning: 'SLICER_PE_BRIDGE_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:05:41,711 ! 73 | static const char* SLICER_PE_BRIDGE_COMMENTS[] = {
2023-05-09 13:05:41,711 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:05:41,712 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:72:20: warning: 'SLICER_PE_GAP_FILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:05:41,712 ! 72 | static const char* SLICER_PE_GAP_FILL_COMMENTS[] = {"gap fill", "move to first gap fill point", NULL};
2023-05-09 13:05:41,712 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:05:41,712 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:69:20: warning: 'SLICER_PE_SOLID_INFILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:05:41,712 ! 69 | static const char* SLICER_PE_SOLID_INFILL_COMMENTS[] = {
2023-05-09 13:05:41,712 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:05:41,713 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:68:20: warning: 'SLICER_PE_INFILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:05:41,713 ! 68 | static const char* SLICER_PE_INFILL_COMMENTS[] = {"infill", "move to first infill point", NULL};
2023-05-09 13:05:41,713 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:05:41,713 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:67:20: warning: 'SLICER_PE_UNKNOWN_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:05:41,713 ! 67 | static const char* SLICER_PE_UNKNOWN_PERIMETER_COMMENTS[] = {"perimeter", "move to first perimeter point", NULL};
2023-05-09 13:05:41,713 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:05:41,713 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:64:20: warning: 'SLICER_PE_INNER_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:05:41,714 ! 64 | static const char* SLICER_PE_INNER_PERIMETER_COMMENTS[] = {
2023-05-09 13:05:41,714 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:05:41,714 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:61:20: warning: 'SLICER_PE_OUTER_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:05:41,714 ! 61 | static const char* SLICER_PE_OUTER_PERIMETER_COMMENTS[] = {
2023-05-09 13:05:41,714 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:05:41,714 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/gcode_position_processor.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/gcode_position_processor.o -O3 -std=c++11
2023-05-09 13:05:41,715 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:915: warning: ignoring '#pragma region location_detection_commands' [-Wunknown-pragmas]
2023-05-09 13:05:41,715 ! 915 | #pragma region location_detection_commands
2023-05-09 13:05:41,715 ! |
2023-05-09 13:05:41,715 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:955: warning: ignoring '#pragma endregion Parse' [-Wunknown-pragmas]
2023-05-09 13:05:41,715 ! 955 | #pragma endregion Parse the list of location detection commands
2023-05-09 13:05:41,715 ! |
2023-05-09 13:05:41,715 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1122: warning: ignoring '#pragma region Extract' [-Wunknown-pragmas]
2023-05-09 13:05:41,716 ! 1122 | #pragma region Extract extruder objects
2023-05-09 13:05:41,716 ! |
2023-05-09 13:05:41,716 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1219: warning: ignoring '#pragma endregion Parse' [-Wunknown-pragmas]
2023-05-09 13:05:41,716 ! 1219 | #pragma endregion Parse extruder objects
2023-05-09 13:05:41,716 ! |
2023-05-09 13:05:41,717 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1221: warning: ignoring '#pragma region Extract' [-Wunknown-pragmas]
2023-05-09 13:05:41,717 ! 1221 | #pragma region Extract firmware extruder offsets from the printer settings
2023-05-09 13:05:41,717 ! |
2023-05-09 13:05:41,717 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1334: warning: ignoring '#pragma endregion Extract' [-Wunknown-pragmas]
2023-05-09 13:05:41,717 ! 1334 | #pragma endregion Extract firmware extruder offsets from the printer settings
2023-05-09 13:05:41,717 ! |
2023-05-09 13:05:41,717 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp: In function 'int main(int, char**)':
2023-05-09 13:05:41,718 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:56:27: warning: 'void PyEval_InitThreads()' is deprecated [-Wdeprecated-declarations]
2023-05-09 13:05:41,718 ! 56 |         PyEval_InitThreads();
2023-05-09 13:05:41,718 ! |         ~~~~~~~~~~~~~~~~~~^~
2023-05-09 13:05:41,718 ! In file included from /usr/include/python3.10/Python.h:130,
2023-05-09 13:05:41,718 ! from octoprint_octolapse/data/lib/c/gcode_position_processor.h:30,
2023-05-09 13:05:41,718 ! from octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:23:
2023-05-09 13:05:41,718 ! /usr/include/python3.10/ceval.h:122:37: note: declared here
2023-05-09 13:05:41,719 ! 122 | Py_DEPRECATED(3.9) PyAPI_FUNC(void) PyEval_InitThreads(void);
2023-05-09 13:05:41,719 ! |                                     ^~~~~~~~~~~~~~~~~~
2023-05-09 13:05:41,719 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp: In function 'PyObject* Initialize(PyObject*, PyObject*)':
2023-05-09 13:05:41,719 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:371:19: warning: unused variable 'p_gcode_position' [-Wunused-variable]
2023-05-09 13:05:41,719 ! 371 |   gcode_position* p_gcode_position = NULL;
2023-05-09 13:05:41,719 ! |                   ^~~~~~~~~~~~~~~~
2023-05-09 13:05:41,720 ! In file included from /usr/include/c++/12.2.1/bits/cxxabi_init_exception.h:38,
2023-05-09 13:05:41,720 ! from /usr/include/c++/12.2.1/bits/exception_ptr.h:38,
2023-05-09 13:05:41,720 ! from /usr/include/c++/12.2.1/exception:168,
2023-05-09 13:05:41,720 ! from /usr/include/c++/12.2.1/stdexcept:38,
2023-05-09 13:05:41,720 ! from /usr/include/c++/12.2.1/system_error:41,
2023-05-09 13:05:41,720 ! from /usr/include/c++/12.2.1/bits/ios_base.h:46,
2023-05-09 13:05:41,720 ! from /usr/include/c++/12.2.1/iomanip:40,
2023-05-09 13:05:41,721 ! from octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:24:
2023-05-09 13:05:41,721 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp: In function 'bool ParseStabilizationArgs(PyObject*, stabilization_args*, PyObject**, PyObject**)':
2023-05-09 13:05:41,721 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1406:12: error: converting to 'bool' from 'std::nullptr_t' requires direct-initialization [-fpermissive]
2023-05-09 13:05:41,721 ! 1406 |     return NULL;
2023-05-09 13:05:41,721 ! |            ^~~~
2023-05-09 13:05:41,721 ! In file included from octoprint_octolapse/data/lib/c/gcode_position_processor.h:37:
2023-05-09 13:05:41,722 ! octoprint_octolapse/data/lib/c/stabilization_smart_gcode.h: At global scope:
2023-05-09 13:05:41,722 ! octoprint_octolapse/data/lib/c/stabilization_smart_gcode.h:5:20: warning: 'SMART_GCODE_STABILIZATION' defined but not used [-Wunused-variable]
2023-05-09 13:05:41,722 ! 5 | static const char* SMART_GCODE_STABILIZATION = "smart_gcode";
2023-05-09 13:05:41,722 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:05:41,722 ! In file included from octoprint_octolapse/data/lib/c/gcode_position_processor.h:36:
2023-05-09 13:05:41,722 ! octoprint_octolapse/data/lib/c/stabilization_smart_layer.h:11:20: warning: 'SMART_LAYER_STABILIZATION' defined but not used [-Wunused-variable]
2023-05-09 13:05:41,722 ! 11 | static const char* SMART_LAYER_STABILIZATION = "smart_layer";
2023-05-09 13:05:41,723 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:05:41,723 ! In file included from octoprint_octolapse/data/lib/c/gcode_position_processor.h:35:
2023-05-09 13:05:41,723 ! octoprint_octolapse/data/lib/c/stabilization.h:44:20: warning: 'send_parsed_command_never' defined but not used [-Wunused-variable]
2023-05-09 13:05:41,723 ! 44 | static const char* send_parsed_command_never = "never";
2023-05-09 13:05:41,723 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:05:41,723 ! octoprint_octolapse/data/lib/c/stabilization.h:43:20: warning: 'send_parsed_command_last' defined but not used [-Wunused-variable]
2023-05-09 13:05:41,723 ! 43 | static const char* send_parsed_command_last = "last";
2023-05-09 13:05:41,724 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:05:41,724 ! octoprint_octolapse/data/lib/c/stabilization.h:42:20: warning: 'send_parsed_command_first' defined but not used [-Wunused-variable]
2023-05-09 13:05:41,724 ! 42 | static const char* send_parsed_command_first = "first";
2023-05-09 13:05:41,724 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:05:41,724 ! octoprint_octolapse/data/lib/c/stabilization.h:41:20: warning: 'snapshot_action' defined but not used [-Wunused-variable]
2023-05-09 13:05:41,724 ! 41 | static const char* snapshot_action = "snapshot";
2023-05-09 13:05:41,725 ! |                    ^~~~~~~~~~~~~~~
2023-05-09 13:05:41,725 ! octoprint_octolapse/data/lib/c/stabilization.h:40:20: warning: 'travel_action' defined but not used [-Wunused-variable]
2023-05-09 13:05:41,725 ! 40 | static const char* travel_action = "travel";
2023-05-09 13:05:41,725 ! |                    ^~~~~~~~~~~~~
2023-05-09 13:05:41,725 ! In file included from octoprint_octolapse/data/lib/c/gcode_position.h:29,
2023-05-09 13:05:41,725 ! from octoprint_octolapse/data/lib/c/gcode_position_processor.h:33:
2023-05-09 13:05:41,725 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:77:20: warning: 'SLICER_PE_SKIRT_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:05:41,726 ! 77 | static const char* SLICER_PE_SKIRT_COMMENTS[] = {"skirt", "move to first skirt point", NULL};
2023-05-09 13:05:41,726 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:05:41,726 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:73:20: warning: 'SLICER_PE_BRIDGE_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:05:41,726 ! 73 | static const char* SLICER_PE_BRIDGE_COMMENTS[] = {
2023-05-09 13:05:41,726 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:05:41,726 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:72:20: warning: 'SLICER_PE_GAP_FILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:05:41,726 ! 72 | static const char* SLICER_PE_GAP_FILL_COMMENTS[] = {"gap fill", "move to first gap fill point", NULL};
2023-05-09 13:05:41,727 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:05:41,727 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:69:20: warning: 'SLICER_PE_SOLID_INFILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:05:41,727 ! 69 | static const char* SLICER_PE_SOLID_INFILL_COMMENTS[] = {
2023-05-09 13:05:41,727 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:05:41,727 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:68:20: warning: 'SLICER_PE_INFILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:05:41,727 ! 68 | static const char* SLICER_PE_INFILL_COMMENTS[] = {"infill", "move to first infill point", NULL};
2023-05-09 13:05:41,727 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:05:41,728 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:67:20: warning: 'SLICER_PE_UNKNOWN_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:05:41,728 ! 67 | static const char* SLICER_PE_UNKNOWN_PERIMETER_COMMENTS[] = {"perimeter", "move to first perimeter point", NULL};
2023-05-09 13:05:41,728 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:05:41,728 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:64:20: warning: 'SLICER_PE_INNER_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:05:41,728 ! 64 | static const char* SLICER_PE_INNER_PERIMETER_COMMENTS[] = {
2023-05-09 13:05:41,728 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:05:41,729 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:61:20: warning: 'SLICER_PE_OUTER_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:05:41,729 ! 61 | static const char* SLICER_PE_OUTER_PERIMETER_COMMENTS[] = {
2023-05-09 13:05:41,729 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:05:41,729 ! error: command '/usr/bin/gcc' failed with exit code 1
2023-05-09 13:05:41,729 ! [end of output]
2023-05-09 13:05:41,729 ! 
2023-05-09 13:05:41,729 ! note: This error originates from a subprocess, and is likely not a problem with pip.
2023-05-09 13:05:41,730 ! error: legacy-install-failure
2023-05-09 13:05:41,730 ! 
2023-05-09 13:05:41,730 ! × Encountered error while trying to install package.
2023-05-09 13:05:41,730 ! ╰─> Octolapse
2023-05-09 13:05:41,730 ! 
2023-05-09 13:05:41,730 ! note: This is an issue with the package mentioned above, not pip.
2023-05-09 13:05:41,730 ! hint: See above for output from the failure.
2023-05-09 13:05:43,259 * Looks like the plugin was already installed. Forcing a reinstall.
2023-05-09 13:05:43,278   /usr/bin/python3 -m pip --disable-pip-version-check install file:///tmp/tmpi7zfv7w4/Octolapse-master.zip --no-cache-dir --ignore-installed --force-reinstall --no-deps --user
2023-05-09 13:05:50,630 > Processing /tmp/tmpi7zfv7w4/Octolapse-master.zip
2023-05-09 13:05:52,921 > Preparing metadata (setup.py): started
2023-05-09 13:06:11,926 ! DEPRECATION: Octolapse is being installed using the legacy 'setup.py install' method, because it does not have a 'pyproject.toml' and the 'wheel' package is not installed. pip 23.1 will enforce this behaviour change. A possible replacement is to enable the '--use-pep517' option. Discussion can be found at https://github.com/pypa/pip/issues/8559
2023-05-09 13:06:12,432 > Preparing metadata (setup.py): finished with status 'done'
2023-05-09 13:06:12,434 > Installing collected packages: Octolapse
2023-05-09 13:06:12,435 > Running setup.py install for Octolapse: started
2023-05-09 13:07:12,671 > Running setup.py install for Octolapse: still running...
2023-05-09 13:07:13,862 > Running setup.py install for Octolapse: finished with status 'error'
2023-05-09 13:07:14,479 ! error: subprocess-exited-with-error
2023-05-09 13:07:14,481 ! 
2023-05-09 13:07:14,482 ! × Running setup.py install for Octolapse did not run successfully.
2023-05-09 13:07:14,483 ! │ exit code: 1
2023-05-09 13:07:14,485 ! ╰─> [1152 lines of output]
2023-05-09 13:07:14,486 ! likely tags: v0.4.2
2023-05-09 13:07:14,487 ! picking v0.4.2
2023-05-09 13:07:14,488 ! got version from expanded keyword {'version': 'v0.4.2', 'full-revisionid': 'c6c86782cdbfc3590fa4b1bf2e63064eb459b16b', 'dirty': False, 'error': None, 'date': '2023-04-02T10:23:21-0500'}
2023-05-09 13:07:14,489 ! Argon2 passlib backend is not available, not using it for password hashing
2023-05-09 13:07:14,490 ! /tmp/pip-req-build-m5js51ew/setup.py:58: DeprecationWarning: distutils Version classes are deprecated. Use packaging.version instead.
2023-05-09 13:07:14,491 ! if LooseVersion(octoprint.server.VERSION) < LooseVersion("1.4"):
2023-05-09 13:07:14,492 ! Found packages: {'octoprint_octolapse_setuptools', 'octoprint_octolapse', 'octoprint_octolapse.test'}
2023-05-09 13:07:14,493 ! running install
2023-05-09 13:07:14,493 ! /usr/lib/python3.10/site-packages/setuptools/command/install.py:34: SetuptoolsDeprecationWarning: setup.py install is deprecated. Use build and pip and other standards-based tools.
2023-05-09 13:07:14,494 ! warnings.warn(
2023-05-09 13:07:14,495 ! running build
2023-05-09 13:07:14,495 ! running build_py
2023-05-09 13:07:14,496 ! creating build
2023-05-09 13:07:14,496 ! creating build/lib.linux-aarch64-cpython-310
2023-05-09 13:07:14,496 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse_setuptools
2023-05-09 13:07:14,497 ! copying octoprint_octolapse_setuptools/__init__.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse_setuptools
2023-05-09 13:07:14,497 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:07:14,497 ! copying octoprint_octolapse/snapshot.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:07:14,498 ! copying octoprint_octolapse/log.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:07:14,498 ! copying octoprint_octolapse/__init__.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:07:14,499 ! copying octoprint_octolapse/messenger_worker.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:07:14,499 ! copying octoprint_octolapse/gcode_processor.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:07:14,500 ! copying octoprint_octolapse/gcode_commands.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:07:14,501 ! copying octoprint_octolapse/camera.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:07:14,501 ! copying octoprint_octolapse/position.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:07:14,502 ! copying octoprint_octolapse/stabilization_preprocessing.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:07:14,502 ! copying octoprint_octolapse/utility.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:07:14,502 ! copying octoprint_octolapse/settings_external.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:07:14,503 ! copying octoprint_octolapse/render.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:07:14,503 ! copying octoprint_octolapse/settings_preprocessor.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:07:14,503 ! copying octoprint_octolapse/script.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:07:14,504 ! copying octoprint_octolapse/migration.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:07:14,509 ! copying octoprint_octolapse/_version.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:07:14,512 ! copying octoprint_octolapse/stabilization_gcode.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:07:14,513 ! copying octoprint_octolapse/settings.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:07:14,513 ! copying octoprint_octolapse/error_messages.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:07:14,514 ! copying octoprint_octolapse/trigger.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:07:14,515 ! copying octoprint_octolapse/timelapse.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:07:14,515 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:07:14,516 ! copying octoprint_octolapse/test/test_settings.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:07:14,516 ! copying octoprint_octolapse/test/test_trigger_layer.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:07:14,516 ! copying octoprint_octolapse/test/__init__.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:07:14,517 ! copying octoprint_octolapse/test/test_extruder.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:07:14,517 ! copying octoprint_octolapse/test/test_parsing.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:07:14,517 ! copying octoprint_octolapse/test/test_render.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:07:14,518 ! copying octoprint_octolapse/test/test_timelapse.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:07:14,518 ! copying octoprint_octolapse/test/test_intersection.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:07:14,518 ! copying octoprint_octolapse/test/test_trigger_gcode.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:07:14,519 ! copying octoprint_octolapse/test/testing_utilities.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:07:14,519 ! copying octoprint_octolapse/test/test_octolapseplugin.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:07:14,519 ! copying octoprint_octolapse/test/test_position.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:07:14,519 ! copying octoprint_octolapse/test/test_trigger_timer.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:07:14,520 ! copying octoprint_octolapse/test/test_command.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:07:14,520 ! copying octoprint_octolapse/test/test_settings_slicer.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:07:14,521 ! copying octoprint_octolapse/test/test_utility.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:07:14,521 ! copying octoprint_octolapse/test/test_snapshotGcode.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:07:14,521 ! copying octoprint_octolapse/test/test_migration_version.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:07:14,522 ! copying octoprint_octolapse/test/test_trigger.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:07:14,522 ! running egg_info
2023-05-09 13:07:14,522 ! creating Octolapse.egg-info
2023-05-09 13:07:14,523 ! writing Octolapse.egg-info/PKG-INFO
2023-05-09 13:07:14,523 ! writing dependency_links to Octolapse.egg-info/dependency_links.txt
2023-05-09 13:07:14,523 ! writing entry points to Octolapse.egg-info/entry_points.txt
2023-05-09 13:07:14,523 ! writing requirements to Octolapse.egg-info/requires.txt
2023-05-09 13:07:14,524 ! writing top-level names to Octolapse.egg-info/top_level.txt
2023-05-09 13:07:14,524 ! writing manifest file 'Octolapse.egg-info/SOURCES.txt'
2023-05-09 13:07:14,524 ! reading manifest file 'Octolapse.egg-info/SOURCES.txt'
2023-05-09 13:07:14,525 ! reading manifest template 'MANIFEST.in'
2023-05-09 13:07:14,525 ! warning: no files found matching 'README.md'
2023-05-09 13:07:14,525 ! warning: no files found matching '*' under directory 'octoprint_octolapse/translations'
2023-05-09 13:07:14,526 ! warning: no files found matching '*' under directory 'octoprint_octolapse/data/images'
2023-05-09 13:07:14,526 ! adding license file 'LICENSE'
2023-05-09 13:07:14,526 ! writing manifest file 'Octolapse.egg-info/SOURCES.txt'
2023-05-09 13:07:14,527 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data' as data is deprecated, please list it in `packages`.
2023-05-09 13:07:14,527 ! !!
2023-05-09 13:07:14,527 ! 
2023-05-09 13:07:14,528 ! 
2023-05-09 13:07:14,528 ! ############################
2023-05-09 13:07:14,528 ! # Package would be ignored #
2023-05-09 13:07:14,529 ! ############################
2023-05-09 13:07:14,529 ! Python recognizes 'octoprint_octolapse.data' as an importable package,
2023-05-09 13:07:14,529 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:07:14,530 ! 
2023-05-09 13:07:14,530 ! 'octoprint_octolapse.data' has been automatically added to the distribution only
2023-05-09 13:07:14,530 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:07:14,530 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:07:14,531 ! 
2023-05-09 13:07:14,531 ! Please make sure that 'octoprint_octolapse.data' is included as a package by using
2023-05-09 13:07:14,531 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:07:14,532 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:07:14,532 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:07:14,532 ! 
2023-05-09 13:07:14,533 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:07:14,533 ! documentation page.
2023-05-09 13:07:14,533 ! 
2023-05-09 13:07:14,534 ! 
2023-05-09 13:07:14,534 ! !!
2023-05-09 13:07:14,534 ! 
2023-05-09 13:07:14,535 ! check.warn(importable)
2023-05-09 13:07:14,535 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.Images' as data is deprecated, please list it in `packages`.
2023-05-09 13:07:14,535 ! !!
2023-05-09 13:07:14,535 ! 
2023-05-09 13:07:14,536 ! 
2023-05-09 13:07:14,536 ! ############################
2023-05-09 13:07:14,536 ! # Package would be ignored #
2023-05-09 13:07:14,537 ! ############################
2023-05-09 13:07:14,537 ! Python recognizes 'octoprint_octolapse.data.Images' as an importable package,
2023-05-09 13:07:14,537 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:07:14,537 ! 
2023-05-09 13:07:14,538 ! 'octoprint_octolapse.data.Images' has been automatically added to the distribution only
2023-05-09 13:07:14,538 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:07:14,538 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:07:14,538 ! 
2023-05-09 13:07:14,538 ! Please make sure that 'octoprint_octolapse.data.Images' is included as a package by using
2023-05-09 13:07:14,538 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:07:14,539 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:07:14,539 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:07:14,539 ! 
2023-05-09 13:07:14,539 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:07:14,540 ! documentation page.
2023-05-09 13:07:14,540 ! 
2023-05-09 13:07:14,540 ! 
2023-05-09 13:07:14,540 ! !!
2023-05-09 13:07:14,540 ! 
2023-05-09 13:07:14,541 ! check.warn(importable)
2023-05-09 13:07:14,541 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.fonts.DejaVu' as data is deprecated, please list it in `packages`.
2023-05-09 13:07:14,541 ! !!
2023-05-09 13:07:14,541 ! 
2023-05-09 13:07:14,541 ! 
2023-05-09 13:07:14,542 ! ############################
2023-05-09 13:07:14,542 ! # Package would be ignored #
2023-05-09 13:07:14,542 ! ############################
2023-05-09 13:07:14,542 ! Python recognizes 'octoprint_octolapse.data.fonts.DejaVu' as an importable package,
2023-05-09 13:07:14,542 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:07:14,542 ! 
2023-05-09 13:07:14,543 ! 'octoprint_octolapse.data.fonts.DejaVu' has been automatically added to the distribution only
2023-05-09 13:07:14,543 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:07:14,543 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:07:14,543 ! 
2023-05-09 13:07:14,543 ! Please make sure that 'octoprint_octolapse.data.fonts.DejaVu' is included as a package by using
2023-05-09 13:07:14,544 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:07:14,544 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:07:14,544 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:07:14,544 ! 
2023-05-09 13:07:14,544 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:07:14,545 ! documentation page.
2023-05-09 13:07:14,545 ! 
2023-05-09 13:07:14,545 ! 
2023-05-09 13:07:14,545 ! !!
2023-05-09 13:07:14,545 ! 
2023-05-09 13:07:14,546 ! check.warn(importable)
2023-05-09 13:07:14,546 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.lib.c' as data is deprecated, please list it in `packages`.
2023-05-09 13:07:14,546 ! !!
2023-05-09 13:07:14,546 ! 
2023-05-09 13:07:14,546 ! 
2023-05-09 13:07:14,547 ! ############################
2023-05-09 13:07:14,547 ! # Package would be ignored #
2023-05-09 13:07:14,547 ! ############################
2023-05-09 13:07:14,547 ! Python recognizes 'octoprint_octolapse.data.lib.c' as an importable package,
2023-05-09 13:07:14,547 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:07:14,547 ! 
2023-05-09 13:07:14,548 ! 'octoprint_octolapse.data.lib.c' has been automatically added to the distribution only
2023-05-09 13:07:14,548 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:07:14,548 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:07:14,548 ! 
2023-05-09 13:07:14,548 ! Please make sure that 'octoprint_octolapse.data.lib.c' is included as a package by using
2023-05-09 13:07:14,549 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:07:14,549 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:07:14,549 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:07:14,549 ! 
2023-05-09 13:07:14,549 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:07:14,550 ! documentation page.
2023-05-09 13:07:14,550 ! 
2023-05-09 13:07:14,550 ! 
2023-05-09 13:07:14,550 ! !!
2023-05-09 13:07:14,550 ! 
2023-05-09 13:07:14,550 ! check.warn(importable)
2023-05-09 13:07:14,551 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.scripts.gcode.cura' as data is deprecated, please list it in `packages`.
2023-05-09 13:07:14,551 ! !!
2023-05-09 13:07:14,551 ! 
2023-05-09 13:07:14,551 ! 
2023-05-09 13:07:14,551 ! ############################
2023-05-09 13:07:14,552 ! # Package would be ignored #
2023-05-09 13:07:14,552 ! ############################
2023-05-09 13:07:14,552 ! Python recognizes 'octoprint_octolapse.data.scripts.gcode.cura' as an importable package,
2023-05-09 13:07:14,552 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:07:14,552 ! 
2023-05-09 13:07:14,553 ! 'octoprint_octolapse.data.scripts.gcode.cura' has been automatically added to the distribution only
2023-05-09 13:07:14,553 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:07:14,553 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:07:14,553 ! 
2023-05-09 13:07:14,553 ! Please make sure that 'octoprint_octolapse.data.scripts.gcode.cura' is included as a package by using
2023-05-09 13:07:14,553 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:07:14,554 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:07:14,554 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:07:14,554 ! 
2023-05-09 13:07:14,554 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:07:14,554 ! documentation page.
2023-05-09 13:07:14,555 ! 
2023-05-09 13:07:14,555 ! 
2023-05-09 13:07:14,555 ! !!
2023-05-09 13:07:14,555 ! 
2023-05-09 13:07:14,555 ! check.warn(importable)
2023-05-09 13:07:14,555 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.scripts.linux' as data is deprecated, please list it in `packages`.
2023-05-09 13:07:14,556 ! !!
2023-05-09 13:07:14,556 ! 
2023-05-09 13:07:14,556 ! 
2023-05-09 13:07:14,556 ! ############################
2023-05-09 13:07:14,556 ! # Package would be ignored #
2023-05-09 13:07:14,557 ! ############################
2023-05-09 13:07:14,557 ! Python recognizes 'octoprint_octolapse.data.scripts.linux' as an importable package,
2023-05-09 13:07:14,557 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:07:14,557 ! 
2023-05-09 13:07:14,557 ! 'octoprint_octolapse.data.scripts.linux' has been automatically added to the distribution only
2023-05-09 13:07:14,558 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:07:14,558 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:07:14,558 ! 
2023-05-09 13:07:14,558 ! Please make sure that 'octoprint_octolapse.data.scripts.linux' is included as a package by using
2023-05-09 13:07:14,558 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:07:14,559 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:07:14,559 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:07:14,559 ! 
2023-05-09 13:07:14,559 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:07:14,559 ! documentation page.
2023-05-09 13:07:14,559 ! 
2023-05-09 13:07:14,560 ! 
2023-05-09 13:07:14,560 ! !!
2023-05-09 13:07:14,560 ! 
2023-05-09 13:07:14,560 ! check.warn(importable)
2023-05-09 13:07:14,560 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.scripts.windows' as data is deprecated, please list it in `packages`.
2023-05-09 13:07:14,561 ! !!
2023-05-09 13:07:14,561 ! 
2023-05-09 13:07:14,561 ! 
2023-05-09 13:07:14,561 ! ############################
2023-05-09 13:07:14,561 ! # Package would be ignored #
2023-05-09 13:07:14,562 ! ############################
2023-05-09 13:07:14,562 ! Python recognizes 'octoprint_octolapse.data.scripts.windows' as an importable package,
2023-05-09 13:07:14,562 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:07:14,562 ! 
2023-05-09 13:07:14,562 ! 'octoprint_octolapse.data.scripts.windows' has been automatically added to the distribution only
2023-05-09 13:07:14,562 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:07:14,563 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:07:14,563 ! 
2023-05-09 13:07:14,563 ! Please make sure that 'octoprint_octolapse.data.scripts.windows' is included as a package by using
2023-05-09 13:07:14,563 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:07:14,563 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:07:14,564 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:07:14,564 ! 
2023-05-09 13:07:14,564 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:07:14,564 ! documentation page.
2023-05-09 13:07:14,564 ! 
2023-05-09 13:07:14,564 ! 
2023-05-09 13:07:14,565 ! !!
2023-05-09 13:07:14,565 ! 
2023-05-09 13:07:14,565 ! check.warn(importable)
2023-05-09 13:07:14,565 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.templates' as data is deprecated, please list it in `packages`.
2023-05-09 13:07:14,565 ! !!
2023-05-09 13:07:14,566 ! 
2023-05-09 13:07:14,566 ! 
2023-05-09 13:07:14,566 ! ############################
2023-05-09 13:07:14,566 ! # Package would be ignored #
2023-05-09 13:07:14,566 ! ############################
2023-05-09 13:07:14,567 ! Python recognizes 'octoprint_octolapse.data.templates' as an importable package,
2023-05-09 13:07:14,567 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:07:14,567 ! 
2023-05-09 13:07:14,567 ! 'octoprint_octolapse.data.templates' has been automatically added to the distribution only
2023-05-09 13:07:14,567 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:07:14,567 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:07:14,568 ! 
2023-05-09 13:07:14,568 ! Please make sure that 'octoprint_octolapse.data.templates' is included as a package by using
2023-05-09 13:07:14,568 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:07:14,568 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:07:14,568 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:07:14,569 ! 
2023-05-09 13:07:14,569 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:07:14,569 ! documentation page.
2023-05-09 13:07:14,569 ! 
2023-05-09 13:07:14,569 ! 
2023-05-09 13:07:14,570 ! !!
2023-05-09 13:07:14,570 ! 
2023-05-09 13:07:14,570 ! check.warn(importable)
2023-05-09 13:07:14,570 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.webcam_types' as data is deprecated, please list it in `packages`.
2023-05-09 13:07:14,570 ! !!
2023-05-09 13:07:14,571 ! 
2023-05-09 13:07:14,571 ! 
2023-05-09 13:07:14,571 ! ############################
2023-05-09 13:07:14,571 ! # Package would be ignored #
2023-05-09 13:07:14,571 ! ############################
2023-05-09 13:07:14,571 ! Python recognizes 'octoprint_octolapse.data.webcam_types' as an importable package,
2023-05-09 13:07:14,572 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:07:14,572 ! 
2023-05-09 13:07:14,572 ! 'octoprint_octolapse.data.webcam_types' has been automatically added to the distribution only
2023-05-09 13:07:14,572 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:07:14,572 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:07:14,573 ! 
2023-05-09 13:07:14,573 ! Please make sure that 'octoprint_octolapse.data.webcam_types' is included as a package by using
2023-05-09 13:07:14,573 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:07:14,573 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:07:14,573 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:07:14,574 ! 
2023-05-09 13:07:14,574 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:07:14,574 ! documentation page.
2023-05-09 13:07:14,574 ! 
2023-05-09 13:07:14,574 ! 
2023-05-09 13:07:14,575 ! !!
2023-05-09 13:07:14,575 ! 
2023-05-09 13:07:14,575 ! check.warn(importable)
2023-05-09 13:07:14,575 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.webcam_types.mjpg_streamer' as data is deprecated, please list it in `packages`.
2023-05-09 13:07:14,575 ! !!
2023-05-09 13:07:14,575 ! 
2023-05-09 13:07:14,576 ! 
2023-05-09 13:07:14,576 ! ############################
2023-05-09 13:07:14,576 ! # Package would be ignored #
2023-05-09 13:07:14,576 ! ############################
2023-05-09 13:07:14,576 ! Python recognizes 'octoprint_octolapse.data.webcam_types.mjpg_streamer' as an importable package,
2023-05-09 13:07:14,577 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:07:14,577 ! 
2023-05-09 13:07:14,577 ! 'octoprint_octolapse.data.webcam_types.mjpg_streamer' has been automatically added to the distribution only
2023-05-09 13:07:14,577 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:07:14,577 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:07:14,578 ! 
2023-05-09 13:07:14,578 ! Please make sure that 'octoprint_octolapse.data.webcam_types.mjpg_streamer' is included as a package by using
2023-05-09 13:07:14,578 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:07:14,578 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:07:14,578 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:07:14,579 ! 
2023-05-09 13:07:14,579 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:07:14,579 ! documentation page.
2023-05-09 13:07:14,579 ! 
2023-05-09 13:07:14,579 ! 
2023-05-09 13:07:14,580 ! !!
2023-05-09 13:07:14,580 ! 
2023-05-09 13:07:14,580 ! check.warn(importable)
2023-05-09 13:07:14,580 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.css' as data is deprecated, please list it in `packages`.
2023-05-09 13:07:14,581 ! !!
2023-05-09 13:07:14,581 ! 
2023-05-09 13:07:14,581 ! 
2023-05-09 13:07:14,581 ! ############################
2023-05-09 13:07:14,581 ! # Package would be ignored #
2023-05-09 13:07:14,582 ! ############################
2023-05-09 13:07:14,582 ! Python recognizes 'octoprint_octolapse.static.css' as an importable package,
2023-05-09 13:07:14,582 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:07:14,582 ! 
2023-05-09 13:07:14,582 ! 'octoprint_octolapse.static.css' has been automatically added to the distribution only
2023-05-09 13:07:14,582 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:07:14,583 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:07:14,583 ! 
2023-05-09 13:07:14,583 ! Please make sure that 'octoprint_octolapse.static.css' is included as a package by using
2023-05-09 13:07:14,583 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:07:14,583 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:07:14,584 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:07:14,584 ! 
2023-05-09 13:07:14,584 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:07:14,584 ! documentation page.
2023-05-09 13:07:14,584 ! 
2023-05-09 13:07:14,585 ! 
2023-05-09 13:07:14,585 ! !!
2023-05-09 13:07:14,585 ! 
2023-05-09 13:07:14,585 ! check.warn(importable)
2023-05-09 13:07:14,585 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.docs.help' as data is deprecated, please list it in `packages`.
2023-05-09 13:07:14,586 ! !!
2023-05-09 13:07:14,586 ! 
2023-05-09 13:07:14,586 ! 
2023-05-09 13:07:14,586 ! ############################
2023-05-09 13:07:14,586 ! # Package would be ignored #
2023-05-09 13:07:14,586 ! ############################
2023-05-09 13:07:14,587 ! Python recognizes 'octoprint_octolapse.static.docs.help' as an importable package,
2023-05-09 13:07:14,587 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:07:14,587 ! 
2023-05-09 13:07:14,587 ! 'octoprint_octolapse.static.docs.help' has been automatically added to the distribution only
2023-05-09 13:07:14,587 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:07:14,588 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:07:14,588 ! 
2023-05-09 13:07:14,588 ! Please make sure that 'octoprint_octolapse.static.docs.help' is included as a package by using
2023-05-09 13:07:14,588 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:07:14,588 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:07:14,589 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:07:14,589 ! 
2023-05-09 13:07:14,589 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:07:14,589 ! documentation page.
2023-05-09 13:07:14,589 ! 
2023-05-09 13:07:14,590 ! 
2023-05-09 13:07:14,590 ! !!
2023-05-09 13:07:14,590 ! 
2023-05-09 13:07:14,590 ! check.warn(importable)
2023-05-09 13:07:14,590 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.img' as data is deprecated, please list it in `packages`.
2023-05-09 13:07:14,590 ! !!
2023-05-09 13:07:14,591 ! 
2023-05-09 13:07:14,591 ! 
2023-05-09 13:07:14,591 ! ############################
2023-05-09 13:07:14,591 ! # Package would be ignored #
2023-05-09 13:07:14,591 ! ############################
2023-05-09 13:07:14,592 ! Python recognizes 'octoprint_octolapse.static.img' as an importable package,
2023-05-09 13:07:14,592 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:07:14,592 ! 
2023-05-09 13:07:14,592 ! 'octoprint_octolapse.static.img' has been automatically added to the distribution only
2023-05-09 13:07:14,592 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:07:14,593 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:07:14,593 ! 
2023-05-09 13:07:14,593 ! Please make sure that 'octoprint_octolapse.static.img' is included as a package by using
2023-05-09 13:07:14,593 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:07:14,593 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:07:14,594 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:07:14,594 ! 
2023-05-09 13:07:14,594 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:07:14,594 ! documentation page.
2023-05-09 13:07:14,594 ! 
2023-05-09 13:07:14,594 ! 
2023-05-09 13:07:14,595 ! !!
2023-05-09 13:07:14,595 ! 
2023-05-09 13:07:14,595 ! check.warn(importable)
2023-05-09 13:07:14,595 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.js' as data is deprecated, please list it in `packages`.
2023-05-09 13:07:14,595 ! !!
2023-05-09 13:07:14,596 ! 
2023-05-09 13:07:14,596 ! 
2023-05-09 13:07:14,596 ! ############################
2023-05-09 13:07:14,596 ! # Package would be ignored #
2023-05-09 13:07:14,596 ! ############################
2023-05-09 13:07:14,597 ! Python recognizes 'octoprint_octolapse.static.js' as an importable package,
2023-05-09 13:07:14,597 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:07:14,597 ! 
2023-05-09 13:07:14,597 ! 'octoprint_octolapse.static.js' has been automatically added to the distribution only
2023-05-09 13:07:14,597 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:07:14,598 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:07:14,598 ! 
2023-05-09 13:07:14,598 ! Please make sure that 'octoprint_octolapse.static.js' is included as a package by using
2023-05-09 13:07:14,598 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:07:14,598 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:07:14,598 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:07:14,599 ! 
2023-05-09 13:07:14,599 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:07:14,599 ! documentation page.
2023-05-09 13:07:14,599 ! 
2023-05-09 13:07:14,599 ! 
2023-05-09 13:07:14,600 ! !!
2023-05-09 13:07:14,600 ! 
2023-05-09 13:07:14,600 ! check.warn(importable)
2023-05-09 13:07:14,600 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.js.webcams.mjpg_streamer' as data is deprecated, please list it in `packages`.
2023-05-09 13:07:14,600 ! !!
2023-05-09 13:07:14,601 ! 
2023-05-09 13:07:14,601 ! 
2023-05-09 13:07:14,601 ! ############################
2023-05-09 13:07:14,601 ! # Package would be ignored #
2023-05-09 13:07:14,601 ! ############################
2023-05-09 13:07:14,602 ! Python recognizes 'octoprint_octolapse.static.js.webcams.mjpg_streamer' as an importable package,
2023-05-09 13:07:14,602 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:07:14,602 ! 
2023-05-09 13:07:14,602 ! 'octoprint_octolapse.static.js.webcams.mjpg_streamer' has been automatically added to the distribution only
2023-05-09 13:07:14,602 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:07:14,602 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:07:14,603 ! 
2023-05-09 13:07:14,603 ! Please make sure that 'octoprint_octolapse.static.js.webcams.mjpg_streamer' is included as a package by using
2023-05-09 13:07:14,603 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:07:14,603 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:07:14,603 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:07:14,604 ! 
2023-05-09 13:07:14,604 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:07:14,604 ! documentation page.
2023-05-09 13:07:14,604 ! 
2023-05-09 13:07:14,604 ! 
2023-05-09 13:07:14,605 ! !!
2023-05-09 13:07:14,605 ! 
2023-05-09 13:07:14,605 ! check.warn(importable)
2023-05-09 13:07:14,605 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.templates' as data is deprecated, please list it in `packages`.
2023-05-09 13:07:14,605 ! !!
2023-05-09 13:07:14,605 ! 
2023-05-09 13:07:14,606 ! 
2023-05-09 13:07:14,606 ! ############################
2023-05-09 13:07:14,606 ! # Package would be ignored #
2023-05-09 13:07:14,606 ! ############################
2023-05-09 13:07:14,606 ! Python recognizes 'octoprint_octolapse.templates' as an importable package,
2023-05-09 13:07:14,607 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:07:14,607 ! 
2023-05-09 13:07:14,607 ! 'octoprint_octolapse.templates' has been automatically added to the distribution only
2023-05-09 13:07:14,607 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:07:14,607 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:07:14,607 ! 
2023-05-09 13:07:14,608 ! Please make sure that 'octoprint_octolapse.templates' is included as a package by using
2023-05-09 13:07:14,608 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:07:14,608 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:07:14,608 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:07:14,610 ! 
2023-05-09 13:07:14,610 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:07:14,610 ! documentation page.
2023-05-09 13:07:14,610 ! 
2023-05-09 13:07:14,610 ! 
2023-05-09 13:07:14,611 ! !!
2023-05-09 13:07:14,611 ! 
2023-05-09 13:07:14,611 ! check.warn(importable)
2023-05-09 13:07:14,611 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.templates.webcams.mjpg_streamer' as data is deprecated, please list it in `packages`.
2023-05-09 13:07:14,611 ! !!
2023-05-09 13:07:14,611 ! 
2023-05-09 13:07:14,612 ! 
2023-05-09 13:07:14,612 ! ############################
2023-05-09 13:07:14,612 ! # Package would be ignored #
2023-05-09 13:07:14,612 ! ############################
2023-05-09 13:07:14,612 ! Python recognizes 'octoprint_octolapse.templates.webcams.mjpg_streamer' as an importable package,
2023-05-09 13:07:14,613 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:07:14,613 ! 
2023-05-09 13:07:14,613 ! 'octoprint_octolapse.templates.webcams.mjpg_streamer' has been automatically added to the distribution only
2023-05-09 13:07:14,613 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:07:14,613 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:07:14,614 ! 
2023-05-09 13:07:14,614 ! Please make sure that 'octoprint_octolapse.templates.webcams.mjpg_streamer' is included as a package by using
2023-05-09 13:07:14,614 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:07:14,614 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:07:14,614 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:07:14,615 ! 
2023-05-09 13:07:14,615 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:07:14,615 ! documentation page.
2023-05-09 13:07:14,615 ! 
2023-05-09 13:07:14,615 ! 
2023-05-09 13:07:14,616 ! !!
2023-05-09 13:07:14,616 ! 
2023-05-09 13:07:14,616 ! check.warn(importable)
2023-05-09 13:07:14,616 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:07:14,616 ! copying octoprint_octolapse/data/settings_default_0.3.3rc3.dev0.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:07:14,617 ! copying octoprint_octolapse/data/settings_default_0.4.0.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:07:14,617 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev0.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:07:14,617 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev2.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:07:14,617 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev3.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:07:14,617 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev4.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:07:14,617 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev5.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:07:14,618 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:07:14,618 ! copying octoprint_octolapse/data/settings_default_0.4.0rc2.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:07:14,618 ! copying octoprint_octolapse/data/settings_default_0.4.0rc3.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:07:14,618 ! copying octoprint_octolapse/data/settings_default_current.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:07:14,618 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 13:07:14,618 ! copying octoprint_octolapse/data/Images/no-camera-selected.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 13:07:14,619 ! copying octoprint_octolapse/data/Images/no-image-available.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 13:07:14,619 ! copying octoprint_octolapse/data/Images/no_snapshot.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 13:07:14,619 ! copying octoprint_octolapse/data/Images/test-snapshot-image.jpg -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 13:07:14,619 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/fonts
2023-05-09 13:07:14,619 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/fonts/DejaVu
2023-05-09 13:07:14,619 ! copying octoprint_octolapse/data/fonts/DejaVu/DejaVuSansMono.ttf -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/fonts/DejaVu
2023-05-09 13:07:14,619 ! copying octoprint_octolapse/data/fonts/DejaVu/license.txt -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/fonts/DejaVu
2023-05-09 13:07:14,620 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib
2023-05-09 13:07:14,620 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:07:14,620 ! copying octoprint_octolapse/data/lib/c/extruder.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:07:14,620 ! copying octoprint_octolapse/data/lib/c/extruder.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:07:14,620 ! copying octoprint_octolapse/data/lib/c/gcode_comment_processor.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:07:14,621 ! copying octoprint_octolapse/data/lib/c/gcode_comment_processor.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:07:14,621 ! copying octoprint_octolapse/data/lib/c/gcode_parser.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:07:14,621 ! copying octoprint_octolapse/data/lib/c/gcode_parser.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:07:14,621 ! copying octoprint_octolapse/data/lib/c/gcode_position.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:07:14,621 ! copying octoprint_octolapse/data/lib/c/gcode_position.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:07:14,621 ! copying octoprint_octolapse/data/lib/c/gcode_position_processor.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:07:14,622 ! copying octoprint_octolapse/data/lib/c/gcode_position_processor.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:07:14,622 ! copying octoprint_octolapse/data/lib/c/logging.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:07:14,622 ! copying octoprint_octolapse/data/lib/c/logging.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:07:14,622 ! copying octoprint_octolapse/data/lib/c/parsed_command.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:07:14,622 ! copying octoprint_octolapse/data/lib/c/parsed_command.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:07:14,622 ! copying octoprint_octolapse/data/lib/c/parsed_command_parameter.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:07:14,623 ! copying octoprint_octolapse/data/lib/c/parsed_command_parameter.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:07:14,623 ! copying octoprint_octolapse/data/lib/c/position.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:07:14,623 ! copying octoprint_octolapse/data/lib/c/position.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:07:14,623 ! copying octoprint_octolapse/data/lib/c/python_helpers.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:07:14,623 ! copying octoprint_octolapse/data/lib/c/python_helpers.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:07:14,623 ! copying octoprint_octolapse/data/lib/c/snapshot_plan.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:07:14,624 ! copying octoprint_octolapse/data/lib/c/snapshot_plan.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:07:14,624 ! copying octoprint_octolapse/data/lib/c/snapshot_plan_step.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:07:14,624 ! copying octoprint_octolapse/data/lib/c/snapshot_plan_step.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:07:14,624 ! copying octoprint_octolapse/data/lib/c/stabilization.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:07:14,624 ! copying octoprint_octolapse/data/lib/c/stabilization.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:07:14,624 ! copying octoprint_octolapse/data/lib/c/stabilization_results.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:07:14,625 ! copying octoprint_octolapse/data/lib/c/stabilization_results.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:07:14,625 ! copying octoprint_octolapse/data/lib/c/stabilization_smart_gcode.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:07:14,625 ! copying octoprint_octolapse/data/lib/c/stabilization_smart_gcode.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:07:14,625 ! copying octoprint_octolapse/data/lib/c/stabilization_smart_layer.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:07:14,625 ! copying octoprint_octolapse/data/lib/c/stabilization_smart_layer.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:07:14,625 ! copying octoprint_octolapse/data/lib/c/stabilization_snap_to_print.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:07:14,626 ! copying octoprint_octolapse/data/lib/c/stabilization_snap_to_print.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:07:14,626 ! copying octoprint_octolapse/data/lib/c/trigger_position.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:07:14,626 ! copying octoprint_octolapse/data/lib/c/trigger_position.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:07:14,626 ! copying octoprint_octolapse/data/lib/c/utilities.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:07:14,626 ! copying octoprint_octolapse/data/lib/c/utilities.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:07:14,626 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts
2023-05-09 13:07:14,627 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode
2023-05-09 13:07:14,627 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:07:14,627 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:07:14,627 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_02_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:07:14,627 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_03_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:07:14,627 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_04_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:07:14,628 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_05_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:07:14,628 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_06_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:07:14,628 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_07_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:07:14,628 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_08_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:07:14,628 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:07:14,628 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:07:14,629 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_02_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:07:14,629 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_03_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:07:14,629 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_04_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:07:14,629 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_05_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:07:14,629 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_06_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:07:14,629 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_07_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:07:14,630 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_08_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:07:14,630 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:07:14,630 ! copying octoprint_octolapse/data/scripts/linux/capture_image_leave_on_camera.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:07:14,630 ! copying octoprint_octolapse/data/scripts/linux/download-from-camera-and-rename.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:07:14,630 ! copying octoprint_octolapse/data/scripts/linux/initialize_dslr.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:07:14,630 ! copying octoprint_octolapse/data/scripts/linux/move_snapshots_to_target.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:07:14,631 ! copying octoprint_octolapse/data/scripts/linux/take_snapshot_and_download.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:07:14,631 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/windows
2023-05-09 13:07:14,631 ! copying octoprint_octolapse/data/scripts/windows/take_snapshot_and_download.bat -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/windows
2023-05-09 13:07:14,631 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/templates
2023-05-09 13:07:14,631 ! copying octoprint_octolapse/data/templates/cura_gcode_settings_template.txt -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/templates
2023-05-09 13:07:14,631 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types
2023-05-09 13:07:14,632 ! copying octoprint_octolapse/data/webcam_types/camera_types.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types
2023-05-09 13:07:14,632 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:07:14,632 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/logitech_c250.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:07:14,632 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/logitech_c920.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:07:14,632 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/logitech_c920_2.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:07:14,632 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/logitech_c920_3.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:07:14,633 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/raspi_cam_v2.1.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:07:14,633 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/raspi_cam_v2.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:07:14,633 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static
2023-05-09 13:07:14,633 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/css
2023-05-09 13:07:14,633 ! copying octoprint_octolapse/static/css/jquery.minicolors.css -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/css
2023-05-09 13:07:14,633 ! copying octoprint_octolapse/static/css/jquery.minicolors.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/css
2023-05-09 13:07:14,634 ! copying octoprint_octolapse/static/css/octolapse.css -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/css
2023-05-09 13:07:14,634 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs
2023-05-09 13:07:14,634 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,634 ! copying octoprint_octolapse/static/docs/help/dialog.renderings.in_process.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,634 ! copying octoprint_octolapse/static/docs/help/dialog.renderings.unfinished.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,634 ! copying octoprint_octolapse/static/docs/help/dialog.timelapse_files.snapshot_archive.import.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,635 ! copying octoprint_octolapse/static/docs/help/dialog.timelapse_files.snapshot_archive.tab.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,635 ! copying octoprint_octolapse/static/docs/help/dialog.timelapse_files.timelapse.tab.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,635 ! copying octoprint_octolapse/static/docs/help/error_help_error_not_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,635 ! copying octoprint_octolapse/static/docs/help/error_help_init_automatic_slicer_no_settings_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,635 ! copying octoprint_octolapse/static/docs/help/error_help_init_automatic_slicer_settings_missing.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,635 ! copying octoprint_octolapse/static/docs/help/error_help_init_before_print_start_camera_script_apply_failed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,636 ! copying octoprint_octolapse/static/docs/help/error_help_init_camera_init_test_failed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,636 ! copying octoprint_octolapse/static/docs/help/error_help_init_camera_settings_apply_failed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,636 ! copying octoprint_octolapse/static/docs/help/error_help_init_cant_print_from_sd.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,636 ! copying octoprint_octolapse/static/docs/help/error_help_init_directory_test_failed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,636 ! copying octoprint_octolapse/static/docs/help/error_help_init_ffmpeg_not_found_at_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,637 ! copying octoprint_octolapse/static/docs/help/error_help_init_ffmpeg_path_not_set.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,637 ! copying octoprint_octolapse/static/docs/help/error_help_init_ffmpeg_path_retrieve_exception.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,637 ! copying octoprint_octolapse/static/docs/help/error_help_init_incorrect_octoprint_version.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,637 ! copying octoprint_octolapse/static/docs/help/error_help_init_incorrect_print_start_state.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,637 ! copying octoprint_octolapse/static/docs/help/error_help_init_m114_not_supported.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,637 ! copying octoprint_octolapse/static/docs/help/error_help_init_manual_slicer_settings_missing.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,638 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_current_job_data_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,638 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_current_job_file_data_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,638 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_enabled_cameras.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,638 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_gcode_filepath_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,638 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_printer_profile_exists.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,638 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_printer_profile_selected.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,639 ! copying octoprint_octolapse/static/docs/help/error_help_init_octolapse_is_disabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,639 ! copying octoprint_octolapse/static/docs/help/error_help_init_overlay_font_path_not_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,639 ! copying octoprint_octolapse/static/docs/help/error_help_init_printer_not_configured.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,639 ! copying octoprint_octolapse/static/docs/help/error_help_init_rendering_file_template_invalid.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,639 ! copying octoprint_octolapse/static/docs/help/error_help_init_timelapse_start_exception.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,639 ! copying octoprint_octolapse/static/docs/help/error_help_init_too_few_extruders_defined.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,640 ! copying octoprint_octolapse/static/docs/help/error_help_init_too_few_extruders_offsets_defined.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,640 ! copying octoprint_octolapse/static/docs/help/error_help_init_unable_to_accept_snapshot_plan.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,640 ! copying octoprint_octolapse/static/docs/help/error_help_init_unexpected_exception.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,640 ! copying octoprint_octolapse/static/docs/help/error_help_init_unknown_file_origin.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,640 ! copying octoprint_octolapse/static/docs/help/error_help_not_a_valid_error_dict.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,640 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_axis_mode_e_unknown.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,641 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_axis_mode_xyz_unknown.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,641 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_incorrect_trigger_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,641 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_no_definite_position.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,641 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_no_metric_units.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,641 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_no_snapshot_commands_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,641 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_no_snapshot_plans_returned.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,642 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_printer_not_primed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,642 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_unhandled_exception.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,642 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_unknown_trigger_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,642 ! copying octoprint_octolapse/static/docs/help/error_help_rendering_archive_import_no_files_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,642 ! copying octoprint_octolapse/static/docs/help/error_help_rendering_archive_import_zip_file_corrupt.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,642 ! copying octoprint_octolapse/static/docs/help/error_help_rendering_archive_import_zip_file_too_large.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,643 ! copying octoprint_octolapse/static/docs/help/error_help_settings_slicer_simplify3d_duplicate_toolhead_numbers.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,643 ! copying octoprint_octolapse/static/docs/help/error_help_settings_slicer_simplify3d_extruder_count_mismatch.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,643 ! copying octoprint_octolapse/static/docs/help/error_help_settings_slicer_simplify3d_max_extruder_count_exceeded.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,643 ! copying octoprint_octolapse/static/docs/help/error_help_settings_slicer_simplify3d_unexpected_max_toolhead_number.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,643 ! copying octoprint_octolapse/static/docs/help/error_help_timelapse_cannot_aquire_job_lock.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,643 ! copying octoprint_octolapse/static/docs/help/main_settings.auto_reload_frames.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,644 ! copying octoprint_octolapse/static/docs/help/main_settings.auto_reload_latest_snapshot.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,644 ! copying octoprint_octolapse/static/docs/help/main_settings.automatic_update_interval_days.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,644 ! copying octoprint_octolapse/static/docs/help/main_settings.automatic_updates_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,644 ! copying octoprint_octolapse/static/docs/help/main_settings.cancel_print_on_startup_error.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,644 ! copying octoprint_octolapse/static/docs/help/main_settings.enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,645 ! copying octoprint_octolapse/static/docs/help/main_settings.is_test_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,645 ! copying octoprint_octolapse/static/docs/help/main_settings.preview_snapshot_plan_autoclose.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,645 ! copying octoprint_octolapse/static/docs/help/main_settings.preview_snapshot_plan_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,645 ! copying octoprint_octolapse/static/docs/help/main_settings.preview_snapshot_plans.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,645 ! copying octoprint_octolapse/static/docs/help/main_settings.show_extruder_state_changes.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,645 ! copying octoprint_octolapse/static/docs/help/main_settings.show_navbar_icon.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,646 ! copying octoprint_octolapse/static/docs/help/main_settings.show_navbar_when_not_printing.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,646 ! copying octoprint_octolapse/static/docs/help/main_settings.show_position_changes.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,646 ! copying octoprint_octolapse/static/docs/help/main_settings.show_printer_state_changes.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,646 ! copying octoprint_octolapse/static/docs/help/main_settings.show_snapshot_plan_information.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,646 ! copying octoprint_octolapse/static/docs/help/main_settings.show_trigger_state_changes.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,646 ! copying octoprint_octolapse/static/docs/help/main_settings.snapshot_archive_directory.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,647 ! copying octoprint_octolapse/static/docs/help/main_settings.temporary_directory.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,647 ! copying octoprint_octolapse/static/docs/help/main_settings.timelapse_directory.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,647 ! copying octoprint_octolapse/static/docs/help/profiles.camera.apply_settings_at_startup.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,647 ! copying octoprint_octolapse/static/docs/help/profiles.camera.apply_settings_before_print.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,647 ! copying octoprint_octolapse/static/docs/help/profiles.camera.apply_settings_when_disabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,647 ! copying octoprint_octolapse/static/docs/help/profiles.camera.camera_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,647 ! copying octoprint_octolapse/static/docs/help/profiles.camera.delay.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,648 ! copying octoprint_octolapse/static/docs/help/profiles.camera.edit_cutsom_image_preferences.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,648 ! copying octoprint_octolapse/static/docs/help/profiles.camera.external_camera_snapshot_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,648 ! copying octoprint_octolapse/static/docs/help/profiles.camera.gcode_camera_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,648 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_after_render_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,648 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_after_snapshot_gcode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,649 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_after_snapshot_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,649 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_before_render_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,649 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_before_snapshot_gcode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,649 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_before_snapshot_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,649 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_print_end_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,649 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_print_start_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,650 ! copying octoprint_octolapse/static/docs/help/profiles.camera.snapshot_transpose.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,650 ! copying octoprint_octolapse/static/docs/help/profiles.camera.stream_template.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,650 ! copying octoprint_octolapse/static/docs/help/profiles.camera.timeout_ms.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,650 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.address.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,650 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.enable_custom_image_preferences.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,650 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.ignore_ssl_error.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,651 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.1.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,651 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029518.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,651 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029519.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,651 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029538.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,651 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029670.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,651 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029671.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,652 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029675.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,652 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094849.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,652 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094850.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,652 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094851.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,652 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094856.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,652 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094857.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,653 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094858.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,653 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094860.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,653 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094861.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,653 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094867.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,653 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094868.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,653 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094870.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,654 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094871.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,654 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094872.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,654 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094873.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,654 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094874.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,654 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10291459.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,654 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963776.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,655 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963777.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,655 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963778.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,655 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963788.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,655 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963790.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,655 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963791.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,655 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963795.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,656 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963796.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,656 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963797.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,656 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963800.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,656 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963802.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,656 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963803.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,656 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963804.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,657 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963807.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,657 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963810.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,657 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963818.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,657 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.password.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,657 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.snapshot_request_template.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,657 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.stream_download.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,658 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.username.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,658 ! copying octoprint_octolapse/static/docs/help/profiles.library.is_custom.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,658 ! copying octoprint_octolapse/static/docs/help/profiles.logging.enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,658 ! copying octoprint_octolapse/static/docs/help/profiles.logging.log_all_errors.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,658 ! copying octoprint_octolapse/static/docs/help/profiles.logging.log_to_console.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,658 ! copying octoprint_octolapse/static/docs/help/profiles.logging.logging_level.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,659 ! copying octoprint_octolapse/static/docs/help/profiles.logging.manage_log_files.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,659 ! copying octoprint_octolapse/static/docs/help/profiles.logging.modules_to_log.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,659 ! copying octoprint_octolapse/static/docs/help/profiles.printer.auto_detect_position.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,659 ! copying octoprint_octolapse/static/docs/help/profiles.printer.auto_position_detection_commands.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,659 ! copying octoprint_octolapse/static/docs/help/profiles.printer.automatic_configuration.is_automatic.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,659 ! copying octoprint_octolapse/static/docs/help/profiles.printer.automatic_configuration.make.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,660 ! copying octoprint_octolapse/static/docs/help/profiles.printer.automatic_configuration.model.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,660 ! copying octoprint_octolapse/static/docs/help/profiles.printer.bed_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,660 ! copying octoprint_octolapse/static/docs/help/profiles.printer.custom_bounding_box.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,660 ! copying octoprint_octolapse/static/docs/help/profiles.printer.default_extruder.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,660 ! copying octoprint_octolapse/static/docs/help/profiles.printer.default_firmware_retractions.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,660 ! copying octoprint_octolapse/static/docs/help/profiles.printer.default_firmware_retractions_zhop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,661 ! copying octoprint_octolapse/static/docs/help/profiles.printer.e_axis_default_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,661 ! copying octoprint_octolapse/static/docs/help/profiles.printer.extruder_offsets.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,661 ! copying octoprint_octolapse/static/docs/help/profiles.printer.g90_influences_extruder.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,661 ! copying octoprint_octolapse/static/docs/help/profiles.printer.gocde_axis_compatibility_mode_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,661 ! copying octoprint_octolapse/static/docs/help/profiles.printer.home_axis_gcode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,661 ! copying octoprint_octolapse/static/docs/help/profiles.printer.invert_e.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,662 ! copying octoprint_octolapse/static/docs/help/profiles.printer.invert_x.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,662 ! copying octoprint_octolapse/static/docs/help/profiles.printer.invert_y.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,662 ! copying octoprint_octolapse/static/docs/help/profiles.printer.invert_z.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,662 ! copying octoprint_octolapse/static/docs/help/profiles.printer.minimum_layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,662 ! copying octoprint_octolapse/static/docs/help/profiles.printer.num_extruders.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,662 ! copying octoprint_octolapse/static/docs/help/profiles.printer.origin_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,663 ! copying octoprint_octolapse/static/docs/help/profiles.printer.override_octoprint_profile_settings.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,663 ! copying octoprint_octolapse/static/docs/help/profiles.printer.priming_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,663 ! copying octoprint_octolapse/static/docs/help/profiles.printer.restrict_snapshot_area.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,663 ! copying octoprint_octolapse/static/docs/help/profiles.printer.shared_extruder.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,663 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicer_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,663 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.automatic.continue_on_failure.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,664 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.automatic.disable_automatic_save.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,664 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.4_2.speed_z_hop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,664 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,664 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.max_feedrate_z_override.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,664 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_amount.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,664 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_enable.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,665 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_hop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,665 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_hop_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,665 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_prime_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,665 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_retract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,665 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.smooth_spiralized_contours.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,665 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.speed_travel.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,666 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.axis_speed_display_unit_options.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,666 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.deretract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,666 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,666 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.retract_before_move.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,666 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.retract_length.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,666 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.retract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,667 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.travel_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,667 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.vase_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,667 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.z_hop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,667 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.z_travel_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,667 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.extruder_use_retract.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,667 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,668 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.retraction_distance.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,668 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.retraction_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,668 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.retraction_vertical_lift.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,668 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.vase_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,668 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.x_y_axis_movement_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,668 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.z_axis_movement_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,669 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.deretract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,669 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,669 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.retract_length.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,669 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.retract_lift.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,669 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.retract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,669 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.travel_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,670 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.vase_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,670 ! copying octoprint_octolapse/static/docs/help/profiles.printer.snapshot_command.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,670 ! copying octoprint_octolapse/static/docs/help/profiles.printer.suppress_snapshot_command_always.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,670 ! copying octoprint_octolapse/static/docs/help/profiles.printer.units_default.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,670 ! copying octoprint_octolapse/static/docs/help/profiles.printer.xyz_axes_default_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,670 ! copying octoprint_octolapse/static/docs/help/profiles.printer.zero_based_extruder.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,671 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.archive_snapshots.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,671 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.bitrate.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,671 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.constant_rate_factor.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,671 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.enable_watermark.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,671 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,671 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.fps.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,672 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.fps_calculation_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,672 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.max_fps.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,672 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.min_fps.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,672 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.output_format.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,672 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.output_template.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,672 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_font_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,673 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_font_size.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,673 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_outline_color.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,673 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_outline_width.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,673 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_preview.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,673 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_alignment.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,673 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_color.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,674 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_halign.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,674 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_pos_xy.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,674 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_template.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,674 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_template_current_time.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,674 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_template_time_elapsed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,674 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_valign.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,675 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.post_roll_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,675 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.pre_roll_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,675 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.run_length_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,675 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.thread_count.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,675 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.wait_for_moves_to_finish.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,675 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_fixed_coordinate.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,676 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_fixed_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,676 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_fixed_path_invert_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,676 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_fixed_path_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,676 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_relative.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,676 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_relative_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,677 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_relative_path_invert_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,677 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_relative_path_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,677 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,677 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_fixed_coordinate.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,677 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_fixed_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,677 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_fixed_path_invert_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,678 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_fixed_path_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,678 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_relative.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,678 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_relative_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,678 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_relative_path_invert_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,678 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_relative_path_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,678 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,678 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.calculate_intersections.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,679 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.extruder_state_requirements_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,679 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.layer_trigger_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,679 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.position_restriction_shape.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,679 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.position_restriction_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,679 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.position_restrictions_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,679 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.require_zhop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,680 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.smart_layer_disable_z_lift.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,680 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.smart_layer_snap_to_print_high_quality.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,680 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.smart_layer_snap_to_print_smooth.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,680 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.smart_layer_trigger_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,680 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.timer_trigger_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,681 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.trigger_subtype.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,681 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.trigger_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,681 ! copying octoprint_octolapse/static/docs/help/quality_issues_fast_trigger.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,681 ! copying octoprint_octolapse/static/docs/help/quality_issues_low_quality_snap_to_print.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,681 ! copying octoprint_octolapse/static/docs/help/quality_issues_no_print_features_detected.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,681 ! copying octoprint_octolapse/static/docs/help/settings.import.import_method.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,682 ! copying octoprint_octolapse/static/docs/help/settings.import.import_text.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,682 ! copying octoprint_octolapse/static/docs/help/snapshot_plan_missed_snapshots.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:07:14,682 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/img
2023-05-09 13:07:14,682 ! copying octoprint_octolapse/static/img/watermark.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/img
2023-05-09 13:07:14,682 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:07:14,682 ! copying octoprint_octolapse/static/js/jquery.minicolors.min.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:07:14,682 ! copying octoprint_octolapse/static/js/jquery.validate.min.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:07:14,683 ! copying octoprint_octolapse/static/js/octolapse.dialog.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:07:14,683 ! copying octoprint_octolapse/static/js/octolapse.dialog.renderings.in_process.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:07:14,683 ! copying octoprint_octolapse/static/js/octolapse.dialog.renderings.unfinished.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:07:14,683 ! copying octoprint_octolapse/static/js/octolapse.dialog.timelapse_files.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:07:14,683 ! copying octoprint_octolapse/static/js/octolapse.file_browser.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:07:14,684 ! copying octoprint_octolapse/static/js/octolapse.help.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:07:14,684 ! copying octoprint_octolapse/static/js/octolapse.helpers.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:07:14,684 ! copying octoprint_octolapse/static/js/octolapse.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:07:14,684 ! copying octoprint_octolapse/static/js/octolapse.profiles.camera.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:07:14,684 ! copying octoprint_octolapse/static/js/octolapse.profiles.camera.webcam.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:07:14,684 ! copying octoprint_octolapse/static/js/octolapse.profiles.camera.webcam.mjpg_streamer.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:07:14,685 ! copying octoprint_octolapse/static/js/octolapse.profiles.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:07:14,685 ! copying octoprint_octolapse/static/js/octolapse.profiles.library.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:07:14,685 ! copying octoprint_octolapse/static/js/octolapse.profiles.logging.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:07:14,685 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:07:14,685 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.slicer.cura.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:07:14,685 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.slicer.other.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:07:14,686 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.slicer.simplify_3d.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:07:14,686 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.slicer.slic3r_pe.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:07:14,686 ! copying octoprint_octolapse/static/js/octolapse.profiles.rendering.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:07:14,686 ! copying octoprint_octolapse/static/js/octolapse.profiles.stabilization.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:07:14,686 ! copying octoprint_octolapse/static/js/octolapse.profiles.trigger.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:07:14,686 ! copying octoprint_octolapse/static/js/octolapse.settings.import.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:07:14,686 ! copying octoprint_octolapse/static/js/octolapse.settings.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:07:14,687 ! copying octoprint_octolapse/static/js/octolapse.settings.main.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:07:14,687 ! copying octoprint_octolapse/static/js/octolapse.status.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:07:14,687 ! copying octoprint_octolapse/static/js/octolapse.status.snapshotplan.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:07:14,687 ! copying octoprint_octolapse/static/js/octolapse.status.snapshotplan_preview.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:07:14,687 ! copying octoprint_octolapse/static/js/showdown.min.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:07:14,687 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js/webcams
2023-05-09 13:07:14,688 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js/webcams/mjpg_streamer
2023-05-09 13:07:14,688 ! copying octoprint_octolapse/static/js/webcams/mjpg_streamer/raspi_cam_v2.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js/webcams/mjpg_streamer
2023-05-09 13:07:14,688 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:07:14,688 ! copying octoprint_octolapse/templates/octolapse_dialog.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:07:14,688 ! copying octoprint_octolapse/templates/octolapse_dialog_rendering_in_process.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:07:14,689 ! copying octoprint_octolapse/templates/octolapse_dialog_rendering_unfinished.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:07:14,689 ! copying octoprint_octolapse/templates/octolapse_dialog_timelapse_files.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:07:14,689 ! copying octoprint_octolapse/templates/octolapse_file_browser.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:07:14,689 ! copying octoprint_octolapse/templates/octolapse_helpers.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:07:14,689 ! copying octoprint_octolapse/templates/octolapse_navbar.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:07:14,689 ! copying octoprint_octolapse/templates/octolapse_profile_dialog_add_edit.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:07:14,690 ! copying octoprint_octolapse/templates/octolapse_profiles.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:07:14,690 ! copying octoprint_octolapse/templates/octolapse_profiles_camera.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:07:14,690 ! copying octoprint_octolapse/templates/octolapse_profiles_camera_webcam.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:07:14,690 ! copying octoprint_octolapse/templates/octolapse_profiles_camera_webcam_mjpg_streamer.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:07:14,690 ! copying octoprint_octolapse/templates/octolapse_profiles_library.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:07:14,690 ! copying octoprint_octolapse/templates/octolapse_profiles_logging.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:07:14,691 ! copying octoprint_octolapse/templates/octolapse_profiles_printer.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:07:14,691 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_automatic.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:07:14,691 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_automatic.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:07:14,691 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_cura.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:07:14,691 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_cura_4.2.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:07:14,691 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_other.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:07:14,692 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_simplify3d.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:07:14,692 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_slic3r_pe.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:07:14,692 ! copying octoprint_octolapse/templates/octolapse_profiles_rendering.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:07:14,692 ! copying octoprint_octolapse/templates/octolapse_profiles_stabilization.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:07:14,692 ! copying octoprint_octolapse/templates/octolapse_profiles_trigger.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:07:14,692 ! copying octoprint_octolapse/templates/octolapse_settings.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:07:14,693 ! copying octoprint_octolapse/templates/octolapse_settings_import.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:07:14,693 ! copying octoprint_octolapse/templates/octolapse_settings_main.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:07:14,693 ! copying octoprint_octolapse/templates/octolapse_snapshot_plan.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:07:14,693 ! copying octoprint_octolapse/templates/octolapse_status_extruder.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:07:14,693 ! copying octoprint_octolapse/templates/octolapse_status_position.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:07:14,693 ! copying octoprint_octolapse/templates/octolapse_status_printer_state.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:07:14,694 ! copying octoprint_octolapse/templates/octolapse_status_snapshot_plan.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:07:14,694 ! copying octoprint_octolapse/templates/octolapse_status_triggers.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:07:14,694 ! copying octoprint_octolapse/templates/octolapse_tab.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:07:14,694 ! copying octoprint_octolapse/templates/octolapse_tab_latest_snapshot.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:07:14,694 ! copying octoprint_octolapse/templates/octolapse_tab_settings_current.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:07:14,694 ! copying octoprint_octolapse/templates/octolapse_tab_settings_current_cameras.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:07:14,695 ! copying octoprint_octolapse/templates/octolapse_tab_snapshot_plan_preview_popup.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:07:14,695 ! copying octoprint_octolapse/templates/octolapse_tab_webcam_settings_popup.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:07:14,695 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams
2023-05-09 13:07:14,695 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams/mjpg_streamer
2023-05-09 13:07:14,695 ! copying octoprint_octolapse/templates/webcams/mjpg_streamer/logitech_c250.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams/mjpg_streamer
2023-05-09 13:07:14,695 ! copying octoprint_octolapse/templates/webcams/mjpg_streamer/logitech_c920.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams/mjpg_streamer
2023-05-09 13:07:14,696 ! copying octoprint_octolapse/templates/webcams/mjpg_streamer/raspi_cam_v2.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams/mjpg_streamer
2023-05-09 13:07:14,696 ! UPDATING build/lib.linux-aarch64-cpython-310/octoprint_octolapse/_version.py
2023-05-09 13:07:14,696 ! set build/lib.linux-aarch64-cpython-310/octoprint_octolapse/_version.py to 'v0.4.2'
2023-05-09 13:07:14,696 ! running build_ext
2023-05-09 13:07:14,696 ! Compiling Octolapse Parser Extension with <distutils.unixccompiler.UnixCCompiler object at 0x7d7879db70>.
2023-05-09 13:07:14,696 ! building 'GcodePositionProcessor' extension
2023-05-09 13:07:14,697 ! creating build/temp.linux-aarch64-cpython-310
2023-05-09 13:07:14,697 ! creating build/temp.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:07:14,697 ! creating build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:07:14,697 ! creating build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib
2023-05-09 13:07:14,697 ! creating build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:07:14,697 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/extruder.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/extruder.o -O3 -std=c++11
2023-05-09 13:07:14,697 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/gcode_comment_processor.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/gcode_comment_processor.o -O3 -std=c++11
2023-05-09 13:07:14,698 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.cpp: In member function 'void gcode_comment_processor::update_feature_from_section(position&) const':
2023-05-09 13:07:14,698 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.cpp:99:16: warning: enumeration value 'section_type_no_section' not handled in switch [-Wswitch]
2023-05-09 13:07:14,698 ! 99 |         switch (current_section_)
2023-05-09 13:07:14,698 ! |                ^
2023-05-09 13:07:14,698 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/gcode_parser.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/gcode_parser.o -O3 -std=c++11
2023-05-09 13:07:14,698 ! octoprint_octolapse/data/lib/c/gcode_parser.cpp: In member function 'bool gcode_parser::try_parse_gcode(const char*, parsed_command&)':
2023-05-09 13:07:14,698 ! octoprint_octolapse/data/lib/c/gcode_parser.cpp:148:47: warning: suggest parentheses around '&&' within '||' [-Wparentheses]
2023-05-09 13:07:14,699 ! 148 |     else if (cur_char > 32 || cur_char == ' ' && has_seen_character)
2023-05-09 13:07:14,699 ! |                               ~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:07:14,699 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/gcode_position.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/gcode_position.o -O3 -std=c++11
2023-05-09 13:07:14,699 ! octoprint_octolapse/data/lib/c/gcode_position.cpp: In member function 'void gcode_position::add_position(position&)':
2023-05-09 13:07:14,699 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:395:12: warning: operation on '((gcode_position*)this)->gcode_position::cur_pos_' may be undefined [-Wsequence-point]
2023-05-09 13:07:14,699 ! 395 |   cur_pos_ = (++cur_pos_) % NUM_POSITIONS;
2023-05-09 13:07:14,699 ! octoprint_octolapse/data/lib/c/gcode_position.cpp: In member function 'void gcode_position::add_position(parsed_command&)':
2023-05-09 13:07:14,700 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:402:12: warning: operation on '((gcode_position*)this)->gcode_position::cur_pos_' may be undefined [-Wsequence-point]
2023-05-09 13:07:14,700 ! 402 |   cur_pos_ = (++cur_pos_) % NUM_POSITIONS;
2023-05-09 13:07:14,700 ! octoprint_octolapse/data/lib/c/gcode_position.cpp: In member function 'void gcode_position::update(parsed_command&, long int, long int, long int)':
2023-05-09 13:07:14,700 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:659:31: warning: comparison of integer expressions of different signedness: 'const unsigned int' and 'int' [-Wsign-compare]
2023-05-09 13:07:14,700 ! 659 |                 if (increment > p_current_pos->height_increment && increment > 1)
2023-05-09 13:07:14,700 ! |                     ~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:07:14,701 ! octoprint_octolapse/data/lib/c/gcode_position.cpp: In member function 'void gcode_position::process_g10(position*, parsed_command&)':
2023-05-09 13:07:14,701 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:952:10: warning: variable 's' set but not used [-Wunused-but-set-variable]
2023-05-09 13:07:14,701 ! 952 |   double s = 0;
2023-05-09 13:07:14,701 ! |          ^
2023-05-09 13:07:14,701 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:953:8: warning: variable 'has_s' set but not used [-Wunused-but-set-variable]
2023-05-09 13:07:14,701 ! 953 |   bool has_s = false;
2023-05-09 13:07:14,701 ! |        ^~~~~
2023-05-09 13:07:14,702 ! In file included from octoprint_octolapse/data/lib/c/gcode_position.h:29,
2023-05-09 13:07:14,702 ! from octoprint_octolapse/data/lib/c/gcode_position.cpp:22:
2023-05-09 13:07:14,702 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h: At global scope:
2023-05-09 13:07:14,702 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:77:20: warning: 'SLICER_PE_SKIRT_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:07:14,702 ! 77 | static const char* SLICER_PE_SKIRT_COMMENTS[] = {"skirt", "move to first skirt point", NULL};
2023-05-09 13:07:14,702 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:07:14,702 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:73:20: warning: 'SLICER_PE_BRIDGE_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:07:14,703 ! 73 | static const char* SLICER_PE_BRIDGE_COMMENTS[] = {
2023-05-09 13:07:14,703 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:07:14,703 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:72:20: warning: 'SLICER_PE_GAP_FILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:07:14,703 ! 72 | static const char* SLICER_PE_GAP_FILL_COMMENTS[] = {"gap fill", "move to first gap fill point", NULL};
2023-05-09 13:07:14,703 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:07:14,703 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:69:20: warning: 'SLICER_PE_SOLID_INFILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:07:14,703 ! 69 | static const char* SLICER_PE_SOLID_INFILL_COMMENTS[] = {
2023-05-09 13:07:14,704 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:07:14,704 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:68:20: warning: 'SLICER_PE_INFILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:07:14,704 ! 68 | static const char* SLICER_PE_INFILL_COMMENTS[] = {"infill", "move to first infill point", NULL};
2023-05-09 13:07:14,704 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:07:14,704 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:67:20: warning: 'SLICER_PE_UNKNOWN_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:07:14,704 ! 67 | static const char* SLICER_PE_UNKNOWN_PERIMETER_COMMENTS[] = {"perimeter", "move to first perimeter point", NULL};
2023-05-09 13:07:14,705 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:07:14,705 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:64:20: warning: 'SLICER_PE_INNER_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:07:14,705 ! 64 | static const char* SLICER_PE_INNER_PERIMETER_COMMENTS[] = {
2023-05-09 13:07:14,705 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:07:14,705 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:61:20: warning: 'SLICER_PE_OUTER_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:07:14,705 ! 61 | static const char* SLICER_PE_OUTER_PERIMETER_COMMENTS[] = {
2023-05-09 13:07:14,705 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:07:14,706 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/gcode_position_processor.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/gcode_position_processor.o -O3 -std=c++11
2023-05-09 13:07:14,706 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:915: warning: ignoring '#pragma region location_detection_commands' [-Wunknown-pragmas]
2023-05-09 13:07:14,706 ! 915 | #pragma region location_detection_commands
2023-05-09 13:07:14,706 ! |
2023-05-09 13:07:14,706 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:955: warning: ignoring '#pragma endregion Parse' [-Wunknown-pragmas]
2023-05-09 13:07:14,706 ! 955 | #pragma endregion Parse the list of location detection commands
2023-05-09 13:07:14,706 ! |
2023-05-09 13:07:14,707 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1122: warning: ignoring '#pragma region Extract' [-Wunknown-pragmas]
2023-05-09 13:07:14,707 ! 1122 | #pragma region Extract extruder objects
2023-05-09 13:07:14,707 ! |
2023-05-09 13:07:14,707 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1219: warning: ignoring '#pragma endregion Parse' [-Wunknown-pragmas]
2023-05-09 13:07:14,707 ! 1219 | #pragma endregion Parse extruder objects
2023-05-09 13:07:14,707 ! |
2023-05-09 13:07:14,707 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1221: warning: ignoring '#pragma region Extract' [-Wunknown-pragmas]
2023-05-09 13:07:14,708 ! 1221 | #pragma region Extract firmware extruder offsets from the printer settings
2023-05-09 13:07:14,708 ! |
2023-05-09 13:07:14,708 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1334: warning: ignoring '#pragma endregion Extract' [-Wunknown-pragmas]
2023-05-09 13:07:14,708 ! 1334 | #pragma endregion Extract firmware extruder offsets from the printer settings
2023-05-09 13:07:14,708 ! |
2023-05-09 13:07:14,708 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp: In function 'int main(int, char**)':
2023-05-09 13:07:14,709 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:56:27: warning: 'void PyEval_InitThreads()' is deprecated [-Wdeprecated-declarations]
2023-05-09 13:07:14,709 ! 56 |         PyEval_InitThreads();
2023-05-09 13:07:14,709 ! |         ~~~~~~~~~~~~~~~~~~^~
2023-05-09 13:07:14,709 ! In file included from /usr/include/python3.10/Python.h:130,
2023-05-09 13:07:14,709 ! from octoprint_octolapse/data/lib/c/gcode_position_processor.h:30,
2023-05-09 13:07:14,709 ! from octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:23:
2023-05-09 13:07:14,709 ! /usr/include/python3.10/ceval.h:122:37: note: declared here
2023-05-09 13:07:14,710 ! 122 | Py_DEPRECATED(3.9) PyAPI_FUNC(void) PyEval_InitThreads(void);
2023-05-09 13:07:14,710 ! |                                     ^~~~~~~~~~~~~~~~~~
2023-05-09 13:07:14,710 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp: In function 'PyObject* Initialize(PyObject*, PyObject*)':
2023-05-09 13:07:14,710 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:371:19: warning: unused variable 'p_gcode_position' [-Wunused-variable]
2023-05-09 13:07:14,710 ! 371 |   gcode_position* p_gcode_position = NULL;
2023-05-09 13:07:14,710 ! |                   ^~~~~~~~~~~~~~~~
2023-05-09 13:07:14,710 ! In file included from /usr/include/c++/12.2.1/bits/cxxabi_init_exception.h:38,
2023-05-09 13:07:14,711 ! from /usr/include/c++/12.2.1/bits/exception_ptr.h:38,
2023-05-09 13:07:14,711 ! from /usr/include/c++/12.2.1/exception:168,
2023-05-09 13:07:14,711 ! from /usr/include/c++/12.2.1/stdexcept:38,
2023-05-09 13:07:14,711 ! from /usr/include/c++/12.2.1/system_error:41,
2023-05-09 13:07:14,711 ! from /usr/include/c++/12.2.1/bits/ios_base.h:46,
2023-05-09 13:07:14,711 ! from /usr/include/c++/12.2.1/iomanip:40,
2023-05-09 13:07:14,712 ! from octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:24:
2023-05-09 13:07:14,712 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp: In function 'bool ParseStabilizationArgs(PyObject*, stabilization_args*, PyObject**, PyObject**)':
2023-05-09 13:07:14,712 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1406:12: error: converting to 'bool' from 'std::nullptr_t' requires direct-initialization [-fpermissive]
2023-05-09 13:07:14,712 ! 1406 |     return NULL;
2023-05-09 13:07:14,712 ! |            ^~~~
2023-05-09 13:07:14,712 ! In file included from octoprint_octolapse/data/lib/c/gcode_position_processor.h:37:
2023-05-09 13:07:14,712 ! octoprint_octolapse/data/lib/c/stabilization_smart_gcode.h: At global scope:
2023-05-09 13:07:14,713 ! octoprint_octolapse/data/lib/c/stabilization_smart_gcode.h:5:20: warning: 'SMART_GCODE_STABILIZATION' defined but not used [-Wunused-variable]
2023-05-09 13:07:14,713 ! 5 | static const char* SMART_GCODE_STABILIZATION = "smart_gcode";
2023-05-09 13:07:14,713 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:07:14,713 ! In file included from octoprint_octolapse/data/lib/c/gcode_position_processor.h:36:
2023-05-09 13:07:14,713 ! octoprint_octolapse/data/lib/c/stabilization_smart_layer.h:11:20: warning: 'SMART_LAYER_STABILIZATION' defined but not used [-Wunused-variable]
2023-05-09 13:07:14,713 ! 11 | static const char* SMART_LAYER_STABILIZATION = "smart_layer";
2023-05-09 13:07:14,714 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:07:14,714 ! In file included from octoprint_octolapse/data/lib/c/gcode_position_processor.h:35:
2023-05-09 13:07:14,714 ! octoprint_octolapse/data/lib/c/stabilization.h:44:20: warning: 'send_parsed_command_never' defined but not used [-Wunused-variable]
2023-05-09 13:07:14,714 ! 44 | static const char* send_parsed_command_never = "never";
2023-05-09 13:07:14,714 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:07:14,714 ! octoprint_octolapse/data/lib/c/stabilization.h:43:20: warning: 'send_parsed_command_last' defined but not used [-Wunused-variable]
2023-05-09 13:07:14,714 ! 43 | static const char* send_parsed_command_last = "last";
2023-05-09 13:07:14,715 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:07:14,715 ! octoprint_octolapse/data/lib/c/stabilization.h:42:20: warning: 'send_parsed_command_first' defined but not used [-Wunused-variable]
2023-05-09 13:07:14,715 ! 42 | static const char* send_parsed_command_first = "first";
2023-05-09 13:07:14,715 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:07:14,715 ! octoprint_octolapse/data/lib/c/stabilization.h:41:20: warning: 'snapshot_action' defined but not used [-Wunused-variable]
2023-05-09 13:07:14,715 ! 41 | static const char* snapshot_action = "snapshot";
2023-05-09 13:07:14,715 ! |                    ^~~~~~~~~~~~~~~
2023-05-09 13:07:14,716 ! octoprint_octolapse/data/lib/c/stabilization.h:40:20: warning: 'travel_action' defined but not used [-Wunused-variable]
2023-05-09 13:07:14,716 ! 40 | static const char* travel_action = "travel";
2023-05-09 13:07:14,716 ! |                    ^~~~~~~~~~~~~
2023-05-09 13:07:14,716 ! In file included from octoprint_octolapse/data/lib/c/gcode_position.h:29,
2023-05-09 13:07:14,716 ! from octoprint_octolapse/data/lib/c/gcode_position_processor.h:33:
2023-05-09 13:07:14,716 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:77:20: warning: 'SLICER_PE_SKIRT_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:07:14,716 ! 77 | static const char* SLICER_PE_SKIRT_COMMENTS[] = {"skirt", "move to first skirt point", NULL};
2023-05-09 13:07:14,717 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:07:14,717 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:73:20: warning: 'SLICER_PE_BRIDGE_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:07:14,717 ! 73 | static const char* SLICER_PE_BRIDGE_COMMENTS[] = {
2023-05-09 13:07:14,717 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:07:14,717 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:72:20: warning: 'SLICER_PE_GAP_FILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:07:14,717 ! 72 | static const char* SLICER_PE_GAP_FILL_COMMENTS[] = {"gap fill", "move to first gap fill point", NULL};
2023-05-09 13:07:14,717 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:07:14,718 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:69:20: warning: 'SLICER_PE_SOLID_INFILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:07:14,718 ! 69 | static const char* SLICER_PE_SOLID_INFILL_COMMENTS[] = {
2023-05-09 13:07:14,718 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:07:14,718 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:68:20: warning: 'SLICER_PE_INFILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:07:14,718 ! 68 | static const char* SLICER_PE_INFILL_COMMENTS[] = {"infill", "move to first infill point", NULL};
2023-05-09 13:07:14,718 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:07:14,718 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:67:20: warning: 'SLICER_PE_UNKNOWN_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:07:14,719 ! 67 | static const char* SLICER_PE_UNKNOWN_PERIMETER_COMMENTS[] = {"perimeter", "move to first perimeter point", NULL};
2023-05-09 13:07:14,719 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:07:14,719 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:64:20: warning: 'SLICER_PE_INNER_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:07:14,719 ! 64 | static const char* SLICER_PE_INNER_PERIMETER_COMMENTS[] = {
2023-05-09 13:07:14,719 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:07:14,719 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:61:20: warning: 'SLICER_PE_OUTER_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:07:14,719 ! 61 | static const char* SLICER_PE_OUTER_PERIMETER_COMMENTS[] = {
2023-05-09 13:07:14,720 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:07:14,720 ! error: command '/usr/bin/gcc' failed with exit code 1
2023-05-09 13:07:14,720 ! [end of output]
2023-05-09 13:07:14,720 ! 
2023-05-09 13:07:14,720 ! note: This error originates from a subprocess, and is likely not a problem with pip.
2023-05-09 13:07:14,720 ! error: legacy-install-failure
2023-05-09 13:07:14,720 ! 
2023-05-09 13:07:14,721 ! × Encountered error while trying to install package.
2023-05-09 13:07:14,721 ! ╰─> Octolapse
2023-05-09 13:07:14,721 ! 
2023-05-09 13:07:14,721 ! note: This is an issue with the package mentioned above, not pip.
2023-05-09 13:07:14,721 ! hint: See above for output from the failure.
2023-05-09 13:18:36,471   /usr/bin/python3 -m pip --disable-pip-version-check install file:///tmp/tmpdltilue5/Octolapse-master.zip --no-cache-dir pip install --upgrade pip --user
2023-05-09 13:18:44,271 ! ERROR: Invalid requirement: 'pip install --upgrade pip'
2023-05-09 13:19:47,448   /usr/bin/python3 -m pip --disable-pip-version-check install file:///tmp/tmp3hgk74d6/Octolapse-master.zip --no-cache-dir pip install --upgrade pip
2023-05-09 13:19:55,049 ! ERROR: Invalid requirement: 'pip install --upgrade pip'
2023-05-09 13:30:00,761   /usr/bin/python3 -m pip --disable-pip-version-check install file:///tmp/tmp_3619yr9/Octolapse-master.zip --no-cache-dir
2023-05-09 13:30:08,072 > Processing /tmp/tmp_3619yr9/Octolapse-master.zip
2023-05-09 13:30:11,488 > Preparing metadata (setup.py): started
2023-05-09 13:30:32,019 > Preparing metadata (setup.py): finished with status 'done'
2023-05-09 13:30:32,021 > Requirement already satisfied: pillow>=6.2.0<7.0.0 in /usr/lib/python3.10/site-packages (from Octolapse==0.4.2) (9.3.0)
2023-05-09 13:30:32,023 > Requirement already satisfied: sarge in /usr/lib/python3.10/site-packages (from Octolapse==0.4.2) (0.1.6)
2023-05-09 13:30:32,024 > Requirement already satisfied: six in /usr/lib/python3.10/site-packages (from Octolapse==0.4.2) (1.16.0)
2023-05-09 13:30:32,025 > Requirement already satisfied: OctoPrint>1.3.8 in /usr/lib/python3.10/site-packages (from Octolapse==0.4.2) (1.8.7)
2023-05-09 13:30:32,029 > Requirement already satisfied: psutil in /usr/lib/python3.10/site-packages (from Octolapse==0.4.2) (5.9.4)
2023-05-09 13:30:32,030 > Requirement already satisfied: file_read_backwards in /usr/lib/python3.10/site-packages (from Octolapse==0.4.2) (3.0.0)
2023-05-09 13:30:32,032 > Requirement already satisfied: setuptools>=6.0 in /usr/lib/python3.10/site-packages (from Octolapse==0.4.2) (65.6.0)
2023-05-09 13:30:32,033 > Requirement already satisfied: awesome-slugify<1.7,>=1.6.5 in /usr/lib/python3.10/site-packages (from Octolapse==0.4.2) (1.6.5)
2023-05-09 13:30:32,034 > Requirement already satisfied: regex in /usr/lib/python3.10/site-packages (from awesome-slugify<1.7,>=1.6.5->Octolapse==0.4.2) (2022.10.31)
2023-05-09 13:30:32,035 > Requirement already satisfied: Unidecode<0.05,>=0.04.14 in /usr/lib/python3.10/site-packages (from awesome-slugify<1.7,>=1.6.5->Octolapse==0.4.2) (0.4.21)
2023-05-09 13:30:32,036 > Requirement already satisfied: OctoPrint-FileCheck>=2021.2.23 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2021.2.23)
2023-05-09 13:30:32,038 > Requirement already satisfied: OctoPrint-FirmwareCheck>=2021.10.11 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2021.10.11)
2023-05-09 13:30:32,039 > Requirement already satisfied: OctoPrint-PiSupport>=2022.6.13 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2022.6.13)
2023-05-09 13:30:32,040 > Requirement already satisfied: argon2_cffi<22,>=21.3.0 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (21.3.0)
2023-05-09 13:30:32,041 > Requirement already satisfied: cachelib<0.3,>=0.2 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (0.2.0)
2023-05-09 13:30:32,042 > Requirement already satisfied: Click<9,>=8.0.3 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (8.1.3)
2023-05-09 13:30:32,043 > Requirement already satisfied: colorlog<7,>=6 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (6.7.0)
2023-05-09 13:30:32,044 > Requirement already satisfied: emoji<2,>=1.4.2 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.7.0)
2023-05-09 13:30:32,046 > Requirement already satisfied: feedparser<7,>=6.0.8 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (6.0.10)
2023-05-09 13:30:32,047 > Requirement already satisfied: filetype<2,>=1.0.7 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.2.0)
2023-05-09 13:30:32,048 > Requirement already satisfied: Flask-Assets<3,>=2.0 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2.0)
2023-05-09 13:30:32,049 > Requirement already satisfied: Flask-Babel<3,>=2.0 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2.0.0)
2023-05-09 13:30:32,051 > Requirement already satisfied: Flask-Login<0.6,>=0.5 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (0.5.0)
2023-05-09 13:30:32,052 > Requirement already satisfied: Flask-Limiter<3,>=2.6 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2.9.2)
2023-05-09 13:30:32,052 > Requirement already satisfied: flask<2.2,>=2.1 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2.1.3)
2023-05-09 13:30:32,053 > Requirement already satisfied: frozendict<3,>=2.0 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2.3.7)
2023-05-09 13:30:32,054 > Requirement already satisfied: future<1,>=0.18.2 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (0.18.3)
2023-05-09 13:30:32,055 > Requirement already satisfied: markdown<4,>=3.2.2 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (3.4.3)
2023-05-09 13:30:32,056 > Requirement already satisfied: netaddr<0.9,>=0.8 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (0.8.0)
2023-05-09 13:30:32,057 > Requirement already satisfied: netifaces<1,>=0.11 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (0.11.0)
2023-05-09 13:30:32,058 > Requirement already satisfied: passlib<2,>=1.7.4 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.7.4)
2023-05-09 13:30:32,059 > Requirement already satisfied: pathvalidate<3,>=2.4.1 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2.5.2)
2023-05-09 13:30:32,059 > Requirement already satisfied: pkginfo<2,>=1.7.1 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.9.6)
2023-05-09 13:30:32,060 > Requirement already satisfied: pylru<2,>=1.2 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.2.1)
2023-05-09 13:30:32,061 > Requirement already satisfied: pyserial<4,>=3.4 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (3.5)
2023-05-09 13:30:32,062 > Requirement already satisfied: PyYAML<6,>=5.4.1 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (5.4.1)
2023-05-09 13:30:32,062 > Requirement already satisfied: requests<3,>=2.26.0 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2.28.2)
2023-05-09 13:30:32,063 > Requirement already satisfied: semantic_version<3,>=2.8.5 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2.10.0)
2023-05-09 13:30:32,064 > Requirement already satisfied: sentry-sdk<2,>=1.5.7 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.19.1)
2023-05-09 13:30:32,065 > Requirement already satisfied: tornado<7,>=6.0.4 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (6.2)
2023-05-09 13:30:32,066 > Requirement already satisfied: watchdog<2,>=1 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.0.2)
2023-05-09 13:30:32,067 > Requirement already satisfied: websocket-client<2,>=1.2.1 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.5.1)
2023-05-09 13:30:32,068 > Requirement already satisfied: werkzeug<2.1,>=2.0 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2.0.3)
2023-05-09 13:30:32,069 > Requirement already satisfied: wrapt<1.15,>=1.14 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.14.1)
2023-05-09 13:30:32,070 > Requirement already satisfied: zeroconf<0.34,>=0.33 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (0.33.4)
2023-05-09 13:30:32,071 > Requirement already satisfied: zipstream-ng<2.0.0,>=1.3.4 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.5.0)
2023-05-09 13:30:32,072 > Requirement already satisfied: blinker<2,>=1.4 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.6.1)
2023-05-09 13:30:32,073 > Requirement already satisfied: typing-extensions>=4.2 in /usr/lib/python3.10/site-packages (from blinker<2,>=1.4->OctoPrint>1.3.8->Octolapse==0.4.2) (4.5.0)
2023-05-09 13:30:32,074 > Requirement already satisfied: sgmllib3k in /usr/lib/python3.10/site-packages (from feedparser<7,>=6.0.8->OctoPrint>1.3.8->Octolapse==0.4.2) (1.0.0)
2023-05-09 13:30:32,074 > Requirement already satisfied: Jinja2>=3.0 in /usr/lib/python3.10/site-packages (from flask<2.2,>=2.1->OctoPrint>1.3.8->Octolapse==0.4.2) (3.1.2)
2023-05-09 13:30:32,075 > Requirement already satisfied: itsdangerous>=2.0 in /usr/lib/python3.10/site-packages (from flask<2.2,>=2.1->OctoPrint>1.3.8->Octolapse==0.4.2) (2.1.2)
2023-05-09 13:30:32,076 > Requirement already satisfied: webassets>=2.0 in /usr/lib/python3.10/site-packages (from Flask-Assets<3,>=2.0->OctoPrint>1.3.8->Octolapse==0.4.2) (2.0)
2023-05-09 13:30:32,077 > Requirement already satisfied: Babel>=2.3 in /usr/lib/python3.10/site-packages (from Flask-Babel<3,>=2.0->OctoPrint>1.3.8->Octolapse==0.4.2) (2.12.1)
2023-05-09 13:30:32,078 > Requirement already satisfied: pytz in /usr/lib/python3.10/site-packages (from Flask-Babel<3,>=2.0->OctoPrint>1.3.8->Octolapse==0.4.2) (2023.3)
2023-05-09 13:30:32,079 > Requirement already satisfied: ordered-set<5,>4 in /usr/lib/python3.10/site-packages (from Flask-Limiter<3,>=2.6->OctoPrint>1.3.8->Octolapse==0.4.2) (4.1.0)
2023-05-09 13:30:32,080 > Requirement already satisfied: rich<13,>=12 in /usr/lib/python3.10/site-packages (from Flask-Limiter<3,>=2.6->OctoPrint>1.3.8->Octolapse==0.4.2) (12.6.0)
2023-05-09 13:30:32,081 > Requirement already satisfied: limits>=2.8 in /usr/lib/python3.10/site-packages (from Flask-Limiter<3,>=2.6->OctoPrint>1.3.8->Octolapse==0.4.2) (3.3.1)
2023-05-09 13:30:32,082 > Requirement already satisfied: idna<4,>=2.5 in /usr/lib/python3.10/site-packages (from requests<3,>=2.26.0->OctoPrint>1.3.8->Octolapse==0.4.2) (3.4)
2023-05-09 13:30:32,083 > Requirement already satisfied: charset-normalizer<4,>=2 in /usr/lib/python3.10/site-packages (from requests<3,>=2.26.0->OctoPrint>1.3.8->Octolapse==0.4.2) (3.1.0)
2023-05-09 13:30:32,083 > Requirement already satisfied: urllib3<1.27,>=1.21.1 in /usr/lib/python3.10/site-packages (from requests<3,>=2.26.0->OctoPrint>1.3.8->Octolapse==0.4.2) (1.26.15)
2023-05-09 13:30:32,084 > Requirement already satisfied: certifi>=2017.4.17 in /usr/lib/python3.10/site-packages (from requests<3,>=2.26.0->OctoPrint>1.3.8->Octolapse==0.4.2) (2022.12.7)
2023-05-09 13:30:32,085 > Requirement already satisfied: ifaddr>=0.1.7 in /usr/lib/python3.10/site-packages (from zeroconf<0.34,>=0.33->OctoPrint>1.3.8->Octolapse==0.4.2) (0.2.0)
2023-05-09 13:30:32,086 > Requirement already satisfied: MarkupSafe>=2.0 in /usr/lib/python3.10/site-packages (from Jinja2>=3.0->flask<2.2,>=2.1->OctoPrint>1.3.8->Octolapse==0.4.2) (2.1.2)
2023-05-09 13:30:32,086 > Requirement already satisfied: importlib-resources>=1.3 in /usr/lib/python3.10/site-packages (from limits>=2.8->Flask-Limiter<3,>=2.6->OctoPrint>1.3.8->Octolapse==0.4.2) (5.12.0)
2023-05-09 13:30:32,087 > Requirement already satisfied: packaging<24,>=21 in /usr/lib/python3.10/site-packages (from limits>=2.8->Flask-Limiter<3,>=2.6->OctoPrint>1.3.8->Octolapse==0.4.2) (23.0)
2023-05-09 13:30:32,089 > Requirement already satisfied: deprecated>=1.2 in /usr/lib/python3.10/site-packages (from limits>=2.8->Flask-Limiter<3,>=2.6->OctoPrint>1.3.8->Octolapse==0.4.2) (1.2.13)
2023-05-09 13:30:32,089 > Requirement already satisfied: commonmark<0.10.0,>=0.9.0 in /usr/lib/python3.10/site-packages (from rich<13,>=12->Flask-Limiter<3,>=2.6->OctoPrint>1.3.8->Octolapse==0.4.2) (0.9.1)
2023-05-09 13:30:32,090 > Requirement already satisfied: pygments<3.0.0,>=2.6.0 in /usr/lib/python3.10/site-packages (from rich<13,>=12->Flask-Limiter<3,>=2.6->OctoPrint>1.3.8->Octolapse==0.4.2) (2.15.0)
2023-05-09 13:30:32,856 ! DEPRECATION: Octolapse is being installed using the legacy 'setup.py install' method, because it does not have a 'pyproject.toml' and the 'wheel' package is not installed. pip 23.1 will enforce this behaviour change. A possible replacement is to enable the '--use-pep517' option. Discussion can be found at https://github.com/pypa/pip/issues/8559
2023-05-09 13:30:33,361 > Installing collected packages: Octolapse
2023-05-09 13:30:33,362 > Running setup.py install for Octolapse: started
2023-05-09 13:31:34,547 > Running setup.py install for Octolapse: still running...
2023-05-09 13:31:35,645 > Running setup.py install for Octolapse: finished with status 'error'
2023-05-09 13:31:36,308 ! error: subprocess-exited-with-error
2023-05-09 13:31:36,313 ! 
2023-05-09 13:31:36,314 ! × Running setup.py install for Octolapse did not run successfully.
2023-05-09 13:31:36,315 ! │ exit code: 1
2023-05-09 13:31:36,316 ! ╰─> [1152 lines of output]
2023-05-09 13:31:36,318 ! likely tags: v0.4.2
2023-05-09 13:31:36,319 ! picking v0.4.2
2023-05-09 13:31:36,320 ! got version from expanded keyword {'version': 'v0.4.2', 'full-revisionid': 'c6c86782cdbfc3590fa4b1bf2e63064eb459b16b', 'dirty': False, 'error': None, 'date': '2023-04-02T10:23:21-0500'}
2023-05-09 13:31:36,321 ! Argon2 passlib backend is not available, not using it for password hashing
2023-05-09 13:31:36,322 ! /tmp/pip-req-build-90q6t6gm/setup.py:58: DeprecationWarning: distutils Version classes are deprecated. Use packaging.version instead.
2023-05-09 13:31:36,323 ! if LooseVersion(octoprint.server.VERSION) < LooseVersion("1.4"):
2023-05-09 13:31:36,324 ! Found packages: {'octoprint_octolapse_setuptools', 'octoprint_octolapse', 'octoprint_octolapse.test'}
2023-05-09 13:31:36,325 ! running install
2023-05-09 13:31:36,326 ! /usr/lib/python3.10/site-packages/setuptools/command/install.py:34: SetuptoolsDeprecationWarning: setup.py install is deprecated. Use build and pip and other standards-based tools.
2023-05-09 13:31:36,327 ! warnings.warn(
2023-05-09 13:31:36,328 ! running build
2023-05-09 13:31:36,328 ! running build_py
2023-05-09 13:31:36,330 ! creating build
2023-05-09 13:31:36,330 ! creating build/lib.linux-aarch64-cpython-310
2023-05-09 13:31:36,331 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse_setuptools
2023-05-09 13:31:36,331 ! copying octoprint_octolapse_setuptools/__init__.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse_setuptools
2023-05-09 13:31:36,332 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:31:36,332 ! copying octoprint_octolapse/snapshot.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:31:36,332 ! copying octoprint_octolapse/log.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:31:36,333 ! copying octoprint_octolapse/__init__.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:31:36,333 ! copying octoprint_octolapse/messenger_worker.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:31:36,334 ! copying octoprint_octolapse/gcode_processor.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:31:36,335 ! copying octoprint_octolapse/gcode_commands.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:31:36,335 ! copying octoprint_octolapse/camera.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:31:36,336 ! copying octoprint_octolapse/position.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:31:36,336 ! copying octoprint_octolapse/stabilization_preprocessing.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:31:36,337 ! copying octoprint_octolapse/utility.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:31:36,337 ! copying octoprint_octolapse/settings_external.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:31:36,337 ! copying octoprint_octolapse/render.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:31:36,338 ! copying octoprint_octolapse/settings_preprocessor.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:31:36,338 ! copying octoprint_octolapse/script.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:31:36,340 ! copying octoprint_octolapse/migration.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:31:36,342 ! copying octoprint_octolapse/_version.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:31:36,343 ! copying octoprint_octolapse/stabilization_gcode.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:31:36,344 ! copying octoprint_octolapse/settings.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:31:36,344 ! copying octoprint_octolapse/error_messages.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:31:36,345 ! copying octoprint_octolapse/trigger.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:31:36,345 ! copying octoprint_octolapse/timelapse.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:31:36,345 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:31:36,346 ! copying octoprint_octolapse/test/test_settings.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:31:36,346 ! copying octoprint_octolapse/test/test_trigger_layer.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:31:36,346 ! copying octoprint_octolapse/test/__init__.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:31:36,347 ! copying octoprint_octolapse/test/test_extruder.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:31:36,347 ! copying octoprint_octolapse/test/test_parsing.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:31:36,347 ! copying octoprint_octolapse/test/test_render.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:31:36,348 ! copying octoprint_octolapse/test/test_timelapse.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:31:36,348 ! copying octoprint_octolapse/test/test_intersection.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:31:36,348 ! copying octoprint_octolapse/test/test_trigger_gcode.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:31:36,349 ! copying octoprint_octolapse/test/testing_utilities.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:31:36,349 ! copying octoprint_octolapse/test/test_octolapseplugin.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:31:36,349 ! copying octoprint_octolapse/test/test_position.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:31:36,350 ! copying octoprint_octolapse/test/test_trigger_timer.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:31:36,350 ! copying octoprint_octolapse/test/test_command.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:31:36,350 ! copying octoprint_octolapse/test/test_settings_slicer.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:31:36,351 ! copying octoprint_octolapse/test/test_utility.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:31:36,351 ! copying octoprint_octolapse/test/test_snapshotGcode.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:31:36,351 ! copying octoprint_octolapse/test/test_migration_version.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:31:36,352 ! copying octoprint_octolapse/test/test_trigger.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:31:36,352 ! running egg_info
2023-05-09 13:31:36,352 ! creating Octolapse.egg-info
2023-05-09 13:31:36,353 ! writing Octolapse.egg-info/PKG-INFO
2023-05-09 13:31:36,353 ! writing dependency_links to Octolapse.egg-info/dependency_links.txt
2023-05-09 13:31:36,353 ! writing entry points to Octolapse.egg-info/entry_points.txt
2023-05-09 13:31:36,354 ! writing requirements to Octolapse.egg-info/requires.txt
2023-05-09 13:31:36,354 ! writing top-level names to Octolapse.egg-info/top_level.txt
2023-05-09 13:31:36,354 ! writing manifest file 'Octolapse.egg-info/SOURCES.txt'
2023-05-09 13:31:36,355 ! reading manifest file 'Octolapse.egg-info/SOURCES.txt'
2023-05-09 13:31:36,355 ! reading manifest template 'MANIFEST.in'
2023-05-09 13:31:36,355 ! warning: no files found matching 'README.md'
2023-05-09 13:31:36,355 ! warning: no files found matching '*' under directory 'octoprint_octolapse/translations'
2023-05-09 13:31:36,356 ! warning: no files found matching '*' under directory 'octoprint_octolapse/data/images'
2023-05-09 13:31:36,356 ! adding license file 'LICENSE'
2023-05-09 13:31:36,357 ! writing manifest file 'Octolapse.egg-info/SOURCES.txt'
2023-05-09 13:31:36,357 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data' as data is deprecated, please list it in `packages`.
2023-05-09 13:31:36,357 ! !!
2023-05-09 13:31:36,358 ! 
2023-05-09 13:31:36,358 ! 
2023-05-09 13:31:36,358 ! ############################
2023-05-09 13:31:36,358 ! # Package would be ignored #
2023-05-09 13:31:36,359 ! ############################
2023-05-09 13:31:36,359 ! Python recognizes 'octoprint_octolapse.data' as an importable package,
2023-05-09 13:31:36,359 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:31:36,360 ! 
2023-05-09 13:31:36,360 ! 'octoprint_octolapse.data' has been automatically added to the distribution only
2023-05-09 13:31:36,361 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:31:36,361 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:31:36,361 ! 
2023-05-09 13:31:36,363 ! Please make sure that 'octoprint_octolapse.data' is included as a package by using
2023-05-09 13:31:36,363 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:31:36,363 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:31:36,364 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:31:36,364 ! 
2023-05-09 13:31:36,364 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:31:36,365 ! documentation page.
2023-05-09 13:31:36,365 ! 
2023-05-09 13:31:36,365 ! 
2023-05-09 13:31:36,366 ! !!
2023-05-09 13:31:36,366 ! 
2023-05-09 13:31:36,366 ! check.warn(importable)
2023-05-09 13:31:36,367 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.Images' as data is deprecated, please list it in `packages`.
2023-05-09 13:31:36,367 ! !!
2023-05-09 13:31:36,367 ! 
2023-05-09 13:31:36,368 ! 
2023-05-09 13:31:36,368 ! ############################
2023-05-09 13:31:36,368 ! # Package would be ignored #
2023-05-09 13:31:36,369 ! ############################
2023-05-09 13:31:36,369 ! Python recognizes 'octoprint_octolapse.data.Images' as an importable package,
2023-05-09 13:31:36,369 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:31:36,369 ! 
2023-05-09 13:31:36,369 ! 'octoprint_octolapse.data.Images' has been automatically added to the distribution only
2023-05-09 13:31:36,370 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:31:36,370 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:31:36,370 ! 
2023-05-09 13:31:36,370 ! Please make sure that 'octoprint_octolapse.data.Images' is included as a package by using
2023-05-09 13:31:36,370 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:31:36,371 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:31:36,371 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:31:36,371 ! 
2023-05-09 13:31:36,371 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:31:36,371 ! documentation page.
2023-05-09 13:31:36,372 ! 
2023-05-09 13:31:36,372 ! 
2023-05-09 13:31:36,372 ! !!
2023-05-09 13:31:36,372 ! 
2023-05-09 13:31:36,372 ! check.warn(importable)
2023-05-09 13:31:36,373 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.fonts.DejaVu' as data is deprecated, please list it in `packages`.
2023-05-09 13:31:36,373 ! !!
2023-05-09 13:31:36,373 ! 
2023-05-09 13:31:36,373 ! 
2023-05-09 13:31:36,373 ! ############################
2023-05-09 13:31:36,374 ! # Package would be ignored #
2023-05-09 13:31:36,374 ! ############################
2023-05-09 13:31:36,374 ! Python recognizes 'octoprint_octolapse.data.fonts.DejaVu' as an importable package,
2023-05-09 13:31:36,374 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:31:36,374 ! 
2023-05-09 13:31:36,375 ! 'octoprint_octolapse.data.fonts.DejaVu' has been automatically added to the distribution only
2023-05-09 13:31:36,375 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:31:36,375 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:31:36,375 ! 
2023-05-09 13:31:36,375 ! Please make sure that 'octoprint_octolapse.data.fonts.DejaVu' is included as a package by using
2023-05-09 13:31:36,376 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:31:36,376 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:31:36,376 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:31:36,376 ! 
2023-05-09 13:31:36,376 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:31:36,377 ! documentation page.
2023-05-09 13:31:36,377 ! 
2023-05-09 13:31:36,377 ! 
2023-05-09 13:31:36,377 ! !!
2023-05-09 13:31:36,377 ! 
2023-05-09 13:31:36,378 ! check.warn(importable)
2023-05-09 13:31:36,378 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.lib.c' as data is deprecated, please list it in `packages`.
2023-05-09 13:31:36,378 ! !!
2023-05-09 13:31:36,378 ! 
2023-05-09 13:31:36,378 ! 
2023-05-09 13:31:36,379 ! ############################
2023-05-09 13:31:36,379 ! # Package would be ignored #
2023-05-09 13:31:36,379 ! ############################
2023-05-09 13:31:36,379 ! Python recognizes 'octoprint_octolapse.data.lib.c' as an importable package,
2023-05-09 13:31:36,379 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:31:36,380 ! 
2023-05-09 13:31:36,380 ! 'octoprint_octolapse.data.lib.c' has been automatically added to the distribution only
2023-05-09 13:31:36,380 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:31:36,381 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:31:36,381 ! 
2023-05-09 13:31:36,381 ! Please make sure that 'octoprint_octolapse.data.lib.c' is included as a package by using
2023-05-09 13:31:36,381 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:31:36,382 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:31:36,382 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:31:36,382 ! 
2023-05-09 13:31:36,382 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:31:36,382 ! documentation page.
2023-05-09 13:31:36,383 ! 
2023-05-09 13:31:36,383 ! 
2023-05-09 13:31:36,383 ! !!
2023-05-09 13:31:36,383 ! 
2023-05-09 13:31:36,383 ! check.warn(importable)
2023-05-09 13:31:36,384 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.scripts.gcode.cura' as data is deprecated, please list it in `packages`.
2023-05-09 13:31:36,384 ! !!
2023-05-09 13:31:36,384 ! 
2023-05-09 13:31:36,384 ! 
2023-05-09 13:31:36,384 ! ############################
2023-05-09 13:31:36,385 ! # Package would be ignored #
2023-05-09 13:31:36,385 ! ############################
2023-05-09 13:31:36,385 ! Python recognizes 'octoprint_octolapse.data.scripts.gcode.cura' as an importable package,
2023-05-09 13:31:36,385 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:31:36,385 ! 
2023-05-09 13:31:36,386 ! 'octoprint_octolapse.data.scripts.gcode.cura' has been automatically added to the distribution only
2023-05-09 13:31:36,386 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:31:36,386 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:31:36,386 ! 
2023-05-09 13:31:36,386 ! Please make sure that 'octoprint_octolapse.data.scripts.gcode.cura' is included as a package by using
2023-05-09 13:31:36,387 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:31:36,387 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:31:36,387 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:31:36,387 ! 
2023-05-09 13:31:36,387 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:31:36,388 ! documentation page.
2023-05-09 13:31:36,388 ! 
2023-05-09 13:31:36,388 ! 
2023-05-09 13:31:36,388 ! !!
2023-05-09 13:31:36,388 ! 
2023-05-09 13:31:36,389 ! check.warn(importable)
2023-05-09 13:31:36,389 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.scripts.linux' as data is deprecated, please list it in `packages`.
2023-05-09 13:31:36,389 ! !!
2023-05-09 13:31:36,389 ! 
2023-05-09 13:31:36,389 ! 
2023-05-09 13:31:36,390 ! ############################
2023-05-09 13:31:36,390 ! # Package would be ignored #
2023-05-09 13:31:36,390 ! ############################
2023-05-09 13:31:36,390 ! Python recognizes 'octoprint_octolapse.data.scripts.linux' as an importable package,
2023-05-09 13:31:36,390 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:31:36,390 ! 
2023-05-09 13:31:36,391 ! 'octoprint_octolapse.data.scripts.linux' has been automatically added to the distribution only
2023-05-09 13:31:36,391 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:31:36,391 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:31:36,391 ! 
2023-05-09 13:31:36,391 ! Please make sure that 'octoprint_octolapse.data.scripts.linux' is included as a package by using
2023-05-09 13:31:36,392 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:31:36,392 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:31:36,392 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:31:36,392 ! 
2023-05-09 13:31:36,392 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:31:36,393 ! documentation page.
2023-05-09 13:31:36,393 ! 
2023-05-09 13:31:36,393 ! 
2023-05-09 13:31:36,393 ! !!
2023-05-09 13:31:36,394 ! 
2023-05-09 13:31:36,394 ! check.warn(importable)
2023-05-09 13:31:36,394 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.scripts.windows' as data is deprecated, please list it in `packages`.
2023-05-09 13:31:36,394 ! !!
2023-05-09 13:31:36,395 ! 
2023-05-09 13:31:36,395 ! 
2023-05-09 13:31:36,396 ! ############################
2023-05-09 13:31:36,396 ! # Package would be ignored #
2023-05-09 13:31:36,396 ! ############################
2023-05-09 13:31:36,396 ! Python recognizes 'octoprint_octolapse.data.scripts.windows' as an importable package,
2023-05-09 13:31:36,397 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:31:36,397 ! 
2023-05-09 13:31:36,397 ! 'octoprint_octolapse.data.scripts.windows' has been automatically added to the distribution only
2023-05-09 13:31:36,397 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:31:36,397 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:31:36,398 ! 
2023-05-09 13:31:36,398 ! Please make sure that 'octoprint_octolapse.data.scripts.windows' is included as a package by using
2023-05-09 13:31:36,398 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:31:36,398 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:31:36,398 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:31:36,399 ! 
2023-05-09 13:31:36,399 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:31:36,399 ! documentation page.
2023-05-09 13:31:36,399 ! 
2023-05-09 13:31:36,399 ! 
2023-05-09 13:31:36,400 ! !!
2023-05-09 13:31:36,400 ! 
2023-05-09 13:31:36,400 ! check.warn(importable)
2023-05-09 13:31:36,400 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.templates' as data is deprecated, please list it in `packages`.
2023-05-09 13:31:36,400 ! !!
2023-05-09 13:31:36,401 ! 
2023-05-09 13:31:36,401 ! 
2023-05-09 13:31:36,401 ! ############################
2023-05-09 13:31:36,401 ! # Package would be ignored #
2023-05-09 13:31:36,401 ! ############################
2023-05-09 13:31:36,402 ! Python recognizes 'octoprint_octolapse.data.templates' as an importable package,
2023-05-09 13:31:36,402 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:31:36,402 ! 
2023-05-09 13:31:36,402 ! 'octoprint_octolapse.data.templates' has been automatically added to the distribution only
2023-05-09 13:31:36,402 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:31:36,403 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:31:36,403 ! 
2023-05-09 13:31:36,403 ! Please make sure that 'octoprint_octolapse.data.templates' is included as a package by using
2023-05-09 13:31:36,403 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:31:36,403 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:31:36,403 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:31:36,404 ! 
2023-05-09 13:31:36,404 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:31:36,404 ! documentation page.
2023-05-09 13:31:36,404 ! 
2023-05-09 13:31:36,405 ! 
2023-05-09 13:31:36,405 ! !!
2023-05-09 13:31:36,405 ! 
2023-05-09 13:31:36,405 ! check.warn(importable)
2023-05-09 13:31:36,405 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.webcam_types' as data is deprecated, please list it in `packages`.
2023-05-09 13:31:36,405 ! !!
2023-05-09 13:31:36,406 ! 
2023-05-09 13:31:36,406 ! 
2023-05-09 13:31:36,406 ! ############################
2023-05-09 13:31:36,406 ! # Package would be ignored #
2023-05-09 13:31:36,406 ! ############################
2023-05-09 13:31:36,407 ! Python recognizes 'octoprint_octolapse.data.webcam_types' as an importable package,
2023-05-09 13:31:36,407 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:31:36,407 ! 
2023-05-09 13:31:36,407 ! 'octoprint_octolapse.data.webcam_types' has been automatically added to the distribution only
2023-05-09 13:31:36,407 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:31:36,408 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:31:36,408 ! 
2023-05-09 13:31:36,408 ! Please make sure that 'octoprint_octolapse.data.webcam_types' is included as a package by using
2023-05-09 13:31:36,408 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:31:36,408 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:31:36,409 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:31:36,409 ! 
2023-05-09 13:31:36,409 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:31:36,409 ! documentation page.
2023-05-09 13:31:36,409 ! 
2023-05-09 13:31:36,410 ! 
2023-05-09 13:31:36,410 ! !!
2023-05-09 13:31:36,410 ! 
2023-05-09 13:31:36,410 ! check.warn(importable)
2023-05-09 13:31:36,410 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.webcam_types.mjpg_streamer' as data is deprecated, please list it in `packages`.
2023-05-09 13:31:36,411 ! !!
2023-05-09 13:31:36,411 ! 
2023-05-09 13:31:36,411 ! 
2023-05-09 13:31:36,411 ! ############################
2023-05-09 13:31:36,411 ! # Package would be ignored #
2023-05-09 13:31:36,412 ! ############################
2023-05-09 13:31:36,412 ! Python recognizes 'octoprint_octolapse.data.webcam_types.mjpg_streamer' as an importable package,
2023-05-09 13:31:36,412 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:31:36,412 ! 
2023-05-09 13:31:36,412 ! 'octoprint_octolapse.data.webcam_types.mjpg_streamer' has been automatically added to the distribution only
2023-05-09 13:31:36,413 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:31:36,413 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:31:36,413 ! 
2023-05-09 13:31:36,413 ! Please make sure that 'octoprint_octolapse.data.webcam_types.mjpg_streamer' is included as a package by using
2023-05-09 13:31:36,413 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:31:36,414 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:31:36,414 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:31:36,414 ! 
2023-05-09 13:31:36,414 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:31:36,414 ! documentation page.
2023-05-09 13:31:36,415 ! 
2023-05-09 13:31:36,415 ! 
2023-05-09 13:31:36,415 ! !!
2023-05-09 13:31:36,415 ! 
2023-05-09 13:31:36,415 ! check.warn(importable)
2023-05-09 13:31:36,416 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.css' as data is deprecated, please list it in `packages`.
2023-05-09 13:31:36,416 ! !!
2023-05-09 13:31:36,416 ! 
2023-05-09 13:31:36,416 ! 
2023-05-09 13:31:36,416 ! ############################
2023-05-09 13:31:36,417 ! # Package would be ignored #
2023-05-09 13:31:36,417 ! ############################
2023-05-09 13:31:36,417 ! Python recognizes 'octoprint_octolapse.static.css' as an importable package,
2023-05-09 13:31:36,417 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:31:36,417 ! 
2023-05-09 13:31:36,418 ! 'octoprint_octolapse.static.css' has been automatically added to the distribution only
2023-05-09 13:31:36,418 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:31:36,418 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:31:36,418 ! 
2023-05-09 13:31:36,418 ! Please make sure that 'octoprint_octolapse.static.css' is included as a package by using
2023-05-09 13:31:36,419 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:31:36,419 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:31:36,419 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:31:36,419 ! 
2023-05-09 13:31:36,419 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:31:36,420 ! documentation page.
2023-05-09 13:31:36,420 ! 
2023-05-09 13:31:36,420 ! 
2023-05-09 13:31:36,420 ! !!
2023-05-09 13:31:36,420 ! 
2023-05-09 13:31:36,421 ! check.warn(importable)
2023-05-09 13:31:36,421 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.docs.help' as data is deprecated, please list it in `packages`.
2023-05-09 13:31:36,421 ! !!
2023-05-09 13:31:36,421 ! 
2023-05-09 13:31:36,421 ! 
2023-05-09 13:31:36,422 ! ############################
2023-05-09 13:31:36,422 ! # Package would be ignored #
2023-05-09 13:31:36,422 ! ############################
2023-05-09 13:31:36,422 ! Python recognizes 'octoprint_octolapse.static.docs.help' as an importable package,
2023-05-09 13:31:36,422 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:31:36,423 ! 
2023-05-09 13:31:36,423 ! 'octoprint_octolapse.static.docs.help' has been automatically added to the distribution only
2023-05-09 13:31:36,423 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:31:36,423 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:31:36,423 ! 
2023-05-09 13:31:36,424 ! Please make sure that 'octoprint_octolapse.static.docs.help' is included as a package by using
2023-05-09 13:31:36,424 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:31:36,424 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:31:36,424 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:31:36,424 ! 
2023-05-09 13:31:36,425 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:31:36,425 ! documentation page.
2023-05-09 13:31:36,425 ! 
2023-05-09 13:31:36,425 ! 
2023-05-09 13:31:36,425 ! !!
2023-05-09 13:31:36,426 ! 
2023-05-09 13:31:36,426 ! check.warn(importable)
2023-05-09 13:31:36,426 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.img' as data is deprecated, please list it in `packages`.
2023-05-09 13:31:36,426 ! !!
2023-05-09 13:31:36,426 ! 
2023-05-09 13:31:36,426 ! 
2023-05-09 13:31:36,427 ! ############################
2023-05-09 13:31:36,427 ! # Package would be ignored #
2023-05-09 13:31:36,427 ! ############################
2023-05-09 13:31:36,427 ! Python recognizes 'octoprint_octolapse.static.img' as an importable package,
2023-05-09 13:31:36,427 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:31:36,428 ! 
2023-05-09 13:31:36,428 ! 'octoprint_octolapse.static.img' has been automatically added to the distribution only
2023-05-09 13:31:36,428 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:31:36,428 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:31:36,428 ! 
2023-05-09 13:31:36,429 ! Please make sure that 'octoprint_octolapse.static.img' is included as a package by using
2023-05-09 13:31:36,429 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:31:36,430 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:31:36,430 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:31:36,430 ! 
2023-05-09 13:31:36,431 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:31:36,431 ! documentation page.
2023-05-09 13:31:36,431 ! 
2023-05-09 13:31:36,431 ! 
2023-05-09 13:31:36,431 ! !!
2023-05-09 13:31:36,432 ! 
2023-05-09 13:31:36,432 ! check.warn(importable)
2023-05-09 13:31:36,432 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.js' as data is deprecated, please list it in `packages`.
2023-05-09 13:31:36,432 ! !!
2023-05-09 13:31:36,432 ! 
2023-05-09 13:31:36,433 ! 
2023-05-09 13:31:36,433 ! ############################
2023-05-09 13:31:36,433 ! # Package would be ignored #
2023-05-09 13:31:36,433 ! ############################
2023-05-09 13:31:36,433 ! Python recognizes 'octoprint_octolapse.static.js' as an importable package,
2023-05-09 13:31:36,434 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:31:36,434 ! 
2023-05-09 13:31:36,434 ! 'octoprint_octolapse.static.js' has been automatically added to the distribution only
2023-05-09 13:31:36,434 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:31:36,434 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:31:36,435 ! 
2023-05-09 13:31:36,435 ! Please make sure that 'octoprint_octolapse.static.js' is included as a package by using
2023-05-09 13:31:36,435 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:31:36,435 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:31:36,435 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:31:36,436 ! 
2023-05-09 13:31:36,436 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:31:36,436 ! documentation page.
2023-05-09 13:31:36,436 ! 
2023-05-09 13:31:36,436 ! 
2023-05-09 13:31:36,437 ! !!
2023-05-09 13:31:36,437 ! 
2023-05-09 13:31:36,437 ! check.warn(importable)
2023-05-09 13:31:36,437 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.js.webcams.mjpg_streamer' as data is deprecated, please list it in `packages`.
2023-05-09 13:31:36,437 ! !!
2023-05-09 13:31:36,438 ! 
2023-05-09 13:31:36,438 ! 
2023-05-09 13:31:36,438 ! ############################
2023-05-09 13:31:36,438 ! # Package would be ignored #
2023-05-09 13:31:36,438 ! ############################
2023-05-09 13:31:36,439 ! Python recognizes 'octoprint_octolapse.static.js.webcams.mjpg_streamer' as an importable package,
2023-05-09 13:31:36,439 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:31:36,439 ! 
2023-05-09 13:31:36,439 ! 'octoprint_octolapse.static.js.webcams.mjpg_streamer' has been automatically added to the distribution only
2023-05-09 13:31:36,439 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:31:36,440 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:31:36,440 ! 
2023-05-09 13:31:36,440 ! Please make sure that 'octoprint_octolapse.static.js.webcams.mjpg_streamer' is included as a package by using
2023-05-09 13:31:36,440 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:31:36,440 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:31:36,441 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:31:36,441 ! 
2023-05-09 13:31:36,441 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:31:36,441 ! documentation page.
2023-05-09 13:31:36,441 ! 
2023-05-09 13:31:36,442 ! 
2023-05-09 13:31:36,442 ! !!
2023-05-09 13:31:36,442 ! 
2023-05-09 13:31:36,442 ! check.warn(importable)
2023-05-09 13:31:36,442 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.templates' as data is deprecated, please list it in `packages`.
2023-05-09 13:31:36,442 ! !!
2023-05-09 13:31:36,443 ! 
2023-05-09 13:31:36,443 ! 
2023-05-09 13:31:36,443 ! ############################
2023-05-09 13:31:36,443 ! # Package would be ignored #
2023-05-09 13:31:36,443 ! ############################
2023-05-09 13:31:36,444 ! Python recognizes 'octoprint_octolapse.templates' as an importable package,
2023-05-09 13:31:36,444 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:31:36,444 ! 
2023-05-09 13:31:36,444 ! 'octoprint_octolapse.templates' has been automatically added to the distribution only
2023-05-09 13:31:36,444 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:31:36,445 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:31:36,445 ! 
2023-05-09 13:31:36,445 ! Please make sure that 'octoprint_octolapse.templates' is included as a package by using
2023-05-09 13:31:36,445 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:31:36,445 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:31:36,446 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:31:36,446 ! 
2023-05-09 13:31:36,446 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:31:36,446 ! documentation page.
2023-05-09 13:31:36,446 ! 
2023-05-09 13:31:36,447 ! 
2023-05-09 13:31:36,447 ! !!
2023-05-09 13:31:36,447 ! 
2023-05-09 13:31:36,447 ! check.warn(importable)
2023-05-09 13:31:36,447 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.templates.webcams.mjpg_streamer' as data is deprecated, please list it in `packages`.
2023-05-09 13:31:36,448 ! !!
2023-05-09 13:31:36,448 ! 
2023-05-09 13:31:36,448 ! 
2023-05-09 13:31:36,448 ! ############################
2023-05-09 13:31:36,449 ! # Package would be ignored #
2023-05-09 13:31:36,449 ! ############################
2023-05-09 13:31:36,449 ! Python recognizes 'octoprint_octolapse.templates.webcams.mjpg_streamer' as an importable package,
2023-05-09 13:31:36,449 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:31:36,449 ! 
2023-05-09 13:31:36,449 ! 'octoprint_octolapse.templates.webcams.mjpg_streamer' has been automatically added to the distribution only
2023-05-09 13:31:36,450 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:31:36,450 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:31:36,450 ! 
2023-05-09 13:31:36,450 ! Please make sure that 'octoprint_octolapse.templates.webcams.mjpg_streamer' is included as a package by using
2023-05-09 13:31:36,450 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:31:36,450 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:31:36,451 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:31:36,451 ! 
2023-05-09 13:31:36,451 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:31:36,451 ! documentation page.
2023-05-09 13:31:36,451 ! 
2023-05-09 13:31:36,451 ! 
2023-05-09 13:31:36,452 ! !!
2023-05-09 13:31:36,452 ! 
2023-05-09 13:31:36,452 ! check.warn(importable)
2023-05-09 13:31:36,452 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:31:36,452 ! copying octoprint_octolapse/data/settings_default_0.3.3rc3.dev0.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:31:36,453 ! copying octoprint_octolapse/data/settings_default_0.4.0.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:31:36,453 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev0.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:31:36,453 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev2.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:31:36,453 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev3.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:31:36,453 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev4.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:31:36,453 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev5.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:31:36,454 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:31:36,454 ! copying octoprint_octolapse/data/settings_default_0.4.0rc2.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:31:36,454 ! copying octoprint_octolapse/data/settings_default_0.4.0rc3.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:31:36,454 ! copying octoprint_octolapse/data/settings_default_current.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:31:36,454 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 13:31:36,454 ! copying octoprint_octolapse/data/Images/no-camera-selected.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 13:31:36,455 ! copying octoprint_octolapse/data/Images/no-image-available.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 13:31:36,455 ! copying octoprint_octolapse/data/Images/no_snapshot.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 13:31:36,455 ! copying octoprint_octolapse/data/Images/test-snapshot-image.jpg -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 13:31:36,455 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/fonts
2023-05-09 13:31:36,455 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/fonts/DejaVu
2023-05-09 13:31:36,455 ! copying octoprint_octolapse/data/fonts/DejaVu/DejaVuSansMono.ttf -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/fonts/DejaVu
2023-05-09 13:31:36,456 ! copying octoprint_octolapse/data/fonts/DejaVu/license.txt -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/fonts/DejaVu
2023-05-09 13:31:36,456 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib
2023-05-09 13:31:36,456 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:31:36,456 ! copying octoprint_octolapse/data/lib/c/extruder.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:31:36,456 ! copying octoprint_octolapse/data/lib/c/extruder.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:31:36,457 ! copying octoprint_octolapse/data/lib/c/gcode_comment_processor.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:31:36,457 ! copying octoprint_octolapse/data/lib/c/gcode_comment_processor.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:31:36,457 ! copying octoprint_octolapse/data/lib/c/gcode_parser.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:31:36,457 ! copying octoprint_octolapse/data/lib/c/gcode_parser.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:31:36,457 ! copying octoprint_octolapse/data/lib/c/gcode_position.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:31:36,457 ! copying octoprint_octolapse/data/lib/c/gcode_position.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:31:36,458 ! copying octoprint_octolapse/data/lib/c/gcode_position_processor.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:31:36,458 ! copying octoprint_octolapse/data/lib/c/gcode_position_processor.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:31:36,458 ! copying octoprint_octolapse/data/lib/c/logging.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:31:36,458 ! copying octoprint_octolapse/data/lib/c/logging.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:31:36,458 ! copying octoprint_octolapse/data/lib/c/parsed_command.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:31:36,458 ! copying octoprint_octolapse/data/lib/c/parsed_command.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:31:36,459 ! copying octoprint_octolapse/data/lib/c/parsed_command_parameter.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:31:36,459 ! copying octoprint_octolapse/data/lib/c/parsed_command_parameter.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:31:36,459 ! copying octoprint_octolapse/data/lib/c/position.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:31:36,459 ! copying octoprint_octolapse/data/lib/c/position.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:31:36,459 ! copying octoprint_octolapse/data/lib/c/python_helpers.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:31:36,459 ! copying octoprint_octolapse/data/lib/c/python_helpers.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:31:36,460 ! copying octoprint_octolapse/data/lib/c/snapshot_plan.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:31:36,460 ! copying octoprint_octolapse/data/lib/c/snapshot_plan.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:31:36,460 ! copying octoprint_octolapse/data/lib/c/snapshot_plan_step.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:31:36,460 ! copying octoprint_octolapse/data/lib/c/snapshot_plan_step.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:31:36,460 ! copying octoprint_octolapse/data/lib/c/stabilization.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:31:36,461 ! copying octoprint_octolapse/data/lib/c/stabilization.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:31:36,461 ! copying octoprint_octolapse/data/lib/c/stabilization_results.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:31:36,461 ! copying octoprint_octolapse/data/lib/c/stabilization_results.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:31:36,461 ! copying octoprint_octolapse/data/lib/c/stabilization_smart_gcode.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:31:36,461 ! copying octoprint_octolapse/data/lib/c/stabilization_smart_gcode.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:31:36,461 ! copying octoprint_octolapse/data/lib/c/stabilization_smart_layer.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:31:36,462 ! copying octoprint_octolapse/data/lib/c/stabilization_smart_layer.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:31:36,462 ! copying octoprint_octolapse/data/lib/c/stabilization_snap_to_print.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:31:36,462 ! copying octoprint_octolapse/data/lib/c/stabilization_snap_to_print.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:31:36,462 ! copying octoprint_octolapse/data/lib/c/trigger_position.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:31:36,462 ! copying octoprint_octolapse/data/lib/c/trigger_position.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:31:36,462 ! copying octoprint_octolapse/data/lib/c/utilities.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:31:36,463 ! copying octoprint_octolapse/data/lib/c/utilities.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:31:36,463 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts
2023-05-09 13:31:36,463 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode
2023-05-09 13:31:36,463 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:31:36,464 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:31:36,464 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_02_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:31:36,464 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_03_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:31:36,465 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_04_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:31:36,465 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_05_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:31:36,465 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_06_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:31:36,465 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_07_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:31:36,465 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_08_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:31:36,466 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:31:36,466 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:31:36,466 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_02_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:31:36,466 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_03_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:31:36,466 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_04_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:31:36,466 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_05_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:31:36,467 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_06_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:31:36,467 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_07_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:31:36,467 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_08_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:31:36,467 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:31:36,467 ! copying octoprint_octolapse/data/scripts/linux/capture_image_leave_on_camera.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:31:36,467 ! copying octoprint_octolapse/data/scripts/linux/download-from-camera-and-rename.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:31:36,468 ! copying octoprint_octolapse/data/scripts/linux/initialize_dslr.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:31:36,468 ! copying octoprint_octolapse/data/scripts/linux/move_snapshots_to_target.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:31:36,468 ! copying octoprint_octolapse/data/scripts/linux/take_snapshot_and_download.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:31:36,468 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/windows
2023-05-09 13:31:36,468 ! copying octoprint_octolapse/data/scripts/windows/take_snapshot_and_download.bat -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/windows
2023-05-09 13:31:36,469 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/templates
2023-05-09 13:31:36,469 ! copying octoprint_octolapse/data/templates/cura_gcode_settings_template.txt -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/templates
2023-05-09 13:31:36,469 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types
2023-05-09 13:31:36,469 ! copying octoprint_octolapse/data/webcam_types/camera_types.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types
2023-05-09 13:31:36,469 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:31:36,469 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/logitech_c250.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:31:36,470 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/logitech_c920.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:31:36,470 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/logitech_c920_2.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:31:36,470 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/logitech_c920_3.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:31:36,470 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/raspi_cam_v2.1.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:31:36,470 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/raspi_cam_v2.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:31:36,471 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static
2023-05-09 13:31:36,471 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/css
2023-05-09 13:31:36,471 ! copying octoprint_octolapse/static/css/jquery.minicolors.css -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/css
2023-05-09 13:31:36,471 ! copying octoprint_octolapse/static/css/jquery.minicolors.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/css
2023-05-09 13:31:36,471 ! copying octoprint_octolapse/static/css/octolapse.css -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/css
2023-05-09 13:31:36,471 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs
2023-05-09 13:31:36,472 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,472 ! copying octoprint_octolapse/static/docs/help/dialog.renderings.in_process.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,472 ! copying octoprint_octolapse/static/docs/help/dialog.renderings.unfinished.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,472 ! copying octoprint_octolapse/static/docs/help/dialog.timelapse_files.snapshot_archive.import.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,472 ! copying octoprint_octolapse/static/docs/help/dialog.timelapse_files.snapshot_archive.tab.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,472 ! copying octoprint_octolapse/static/docs/help/dialog.timelapse_files.timelapse.tab.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,473 ! copying octoprint_octolapse/static/docs/help/error_help_error_not_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,473 ! copying octoprint_octolapse/static/docs/help/error_help_init_automatic_slicer_no_settings_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,473 ! copying octoprint_octolapse/static/docs/help/error_help_init_automatic_slicer_settings_missing.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,473 ! copying octoprint_octolapse/static/docs/help/error_help_init_before_print_start_camera_script_apply_failed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,473 ! copying octoprint_octolapse/static/docs/help/error_help_init_camera_init_test_failed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,473 ! copying octoprint_octolapse/static/docs/help/error_help_init_camera_settings_apply_failed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,474 ! copying octoprint_octolapse/static/docs/help/error_help_init_cant_print_from_sd.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,474 ! copying octoprint_octolapse/static/docs/help/error_help_init_directory_test_failed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,474 ! copying octoprint_octolapse/static/docs/help/error_help_init_ffmpeg_not_found_at_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,474 ! copying octoprint_octolapse/static/docs/help/error_help_init_ffmpeg_path_not_set.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,474 ! copying octoprint_octolapse/static/docs/help/error_help_init_ffmpeg_path_retrieve_exception.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,475 ! copying octoprint_octolapse/static/docs/help/error_help_init_incorrect_octoprint_version.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,475 ! copying octoprint_octolapse/static/docs/help/error_help_init_incorrect_print_start_state.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,475 ! copying octoprint_octolapse/static/docs/help/error_help_init_m114_not_supported.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,475 ! copying octoprint_octolapse/static/docs/help/error_help_init_manual_slicer_settings_missing.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,475 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_current_job_data_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,475 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_current_job_file_data_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,476 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_enabled_cameras.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,476 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_gcode_filepath_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,476 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_printer_profile_exists.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,476 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_printer_profile_selected.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,476 ! copying octoprint_octolapse/static/docs/help/error_help_init_octolapse_is_disabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,476 ! copying octoprint_octolapse/static/docs/help/error_help_init_overlay_font_path_not_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,477 ! copying octoprint_octolapse/static/docs/help/error_help_init_printer_not_configured.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,477 ! copying octoprint_octolapse/static/docs/help/error_help_init_rendering_file_template_invalid.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,477 ! copying octoprint_octolapse/static/docs/help/error_help_init_timelapse_start_exception.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,477 ! copying octoprint_octolapse/static/docs/help/error_help_init_too_few_extruders_defined.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,477 ! copying octoprint_octolapse/static/docs/help/error_help_init_too_few_extruders_offsets_defined.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,478 ! copying octoprint_octolapse/static/docs/help/error_help_init_unable_to_accept_snapshot_plan.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,478 ! copying octoprint_octolapse/static/docs/help/error_help_init_unexpected_exception.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,478 ! copying octoprint_octolapse/static/docs/help/error_help_init_unknown_file_origin.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,478 ! copying octoprint_octolapse/static/docs/help/error_help_not_a_valid_error_dict.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,478 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_axis_mode_e_unknown.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,478 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_axis_mode_xyz_unknown.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,479 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_incorrect_trigger_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,479 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_no_definite_position.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,479 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_no_metric_units.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,479 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_no_snapshot_commands_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,479 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_no_snapshot_plans_returned.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,479 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_printer_not_primed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,480 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_unhandled_exception.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,480 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_unknown_trigger_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,480 ! copying octoprint_octolapse/static/docs/help/error_help_rendering_archive_import_no_files_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,480 ! copying octoprint_octolapse/static/docs/help/error_help_rendering_archive_import_zip_file_corrupt.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,480 ! copying octoprint_octolapse/static/docs/help/error_help_rendering_archive_import_zip_file_too_large.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,480 ! copying octoprint_octolapse/static/docs/help/error_help_settings_slicer_simplify3d_duplicate_toolhead_numbers.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,481 ! copying octoprint_octolapse/static/docs/help/error_help_settings_slicer_simplify3d_extruder_count_mismatch.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,481 ! copying octoprint_octolapse/static/docs/help/error_help_settings_slicer_simplify3d_max_extruder_count_exceeded.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,481 ! copying octoprint_octolapse/static/docs/help/error_help_settings_slicer_simplify3d_unexpected_max_toolhead_number.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,481 ! copying octoprint_octolapse/static/docs/help/error_help_timelapse_cannot_aquire_job_lock.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,481 ! copying octoprint_octolapse/static/docs/help/main_settings.auto_reload_frames.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,482 ! copying octoprint_octolapse/static/docs/help/main_settings.auto_reload_latest_snapshot.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,482 ! copying octoprint_octolapse/static/docs/help/main_settings.automatic_update_interval_days.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,482 ! copying octoprint_octolapse/static/docs/help/main_settings.automatic_updates_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,482 ! copying octoprint_octolapse/static/docs/help/main_settings.cancel_print_on_startup_error.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,482 ! copying octoprint_octolapse/static/docs/help/main_settings.enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,482 ! copying octoprint_octolapse/static/docs/help/main_settings.is_test_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,483 ! copying octoprint_octolapse/static/docs/help/main_settings.preview_snapshot_plan_autoclose.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,483 ! copying octoprint_octolapse/static/docs/help/main_settings.preview_snapshot_plan_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,483 ! copying octoprint_octolapse/static/docs/help/main_settings.preview_snapshot_plans.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,483 ! copying octoprint_octolapse/static/docs/help/main_settings.show_extruder_state_changes.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,483 ! copying octoprint_octolapse/static/docs/help/main_settings.show_navbar_icon.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,483 ! copying octoprint_octolapse/static/docs/help/main_settings.show_navbar_when_not_printing.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,484 ! copying octoprint_octolapse/static/docs/help/main_settings.show_position_changes.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,484 ! copying octoprint_octolapse/static/docs/help/main_settings.show_printer_state_changes.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,484 ! copying octoprint_octolapse/static/docs/help/main_settings.show_snapshot_plan_information.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,484 ! copying octoprint_octolapse/static/docs/help/main_settings.show_trigger_state_changes.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,484 ! copying octoprint_octolapse/static/docs/help/main_settings.snapshot_archive_directory.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,485 ! copying octoprint_octolapse/static/docs/help/main_settings.temporary_directory.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,485 ! copying octoprint_octolapse/static/docs/help/main_settings.timelapse_directory.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,485 ! copying octoprint_octolapse/static/docs/help/profiles.camera.apply_settings_at_startup.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,485 ! copying octoprint_octolapse/static/docs/help/profiles.camera.apply_settings_before_print.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,485 ! copying octoprint_octolapse/static/docs/help/profiles.camera.apply_settings_when_disabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,485 ! copying octoprint_octolapse/static/docs/help/profiles.camera.camera_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,486 ! copying octoprint_octolapse/static/docs/help/profiles.camera.delay.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,486 ! copying octoprint_octolapse/static/docs/help/profiles.camera.edit_cutsom_image_preferences.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,486 ! copying octoprint_octolapse/static/docs/help/profiles.camera.external_camera_snapshot_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,486 ! copying octoprint_octolapse/static/docs/help/profiles.camera.gcode_camera_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,486 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_after_render_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,486 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_after_snapshot_gcode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,487 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_after_snapshot_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,487 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_before_render_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,487 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_before_snapshot_gcode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,487 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_before_snapshot_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,487 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_print_end_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,487 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_print_start_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,488 ! copying octoprint_octolapse/static/docs/help/profiles.camera.snapshot_transpose.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,488 ! copying octoprint_octolapse/static/docs/help/profiles.camera.stream_template.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,488 ! copying octoprint_octolapse/static/docs/help/profiles.camera.timeout_ms.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,488 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.address.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,488 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.enable_custom_image_preferences.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,489 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.ignore_ssl_error.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,489 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.1.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,489 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029518.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,489 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029519.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,489 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029538.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,489 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029670.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,490 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029671.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,490 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029675.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,490 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094849.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,490 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094850.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,490 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094851.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,490 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094856.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,491 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094857.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,491 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094858.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,491 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094860.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,491 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094861.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,491 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094867.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,491 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094868.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,492 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094870.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,492 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094871.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,492 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094872.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,492 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094873.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,492 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094874.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,493 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10291459.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,493 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963776.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,493 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963777.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,493 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963778.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,493 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963788.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,493 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963790.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,494 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963791.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,494 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963795.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,494 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963796.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,494 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963797.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,494 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963800.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,494 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963802.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,495 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963803.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,495 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963804.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,495 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963807.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,495 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963810.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,495 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963818.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,496 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.password.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,496 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.snapshot_request_template.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,497 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.stream_download.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,497 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.username.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,497 ! copying octoprint_octolapse/static/docs/help/profiles.library.is_custom.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,497 ! copying octoprint_octolapse/static/docs/help/profiles.logging.enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,498 ! copying octoprint_octolapse/static/docs/help/profiles.logging.log_all_errors.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,498 ! copying octoprint_octolapse/static/docs/help/profiles.logging.log_to_console.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,498 ! copying octoprint_octolapse/static/docs/help/profiles.logging.logging_level.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,498 ! copying octoprint_octolapse/static/docs/help/profiles.logging.manage_log_files.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,498 ! copying octoprint_octolapse/static/docs/help/profiles.logging.modules_to_log.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,498 ! copying octoprint_octolapse/static/docs/help/profiles.printer.auto_detect_position.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,499 ! copying octoprint_octolapse/static/docs/help/profiles.printer.auto_position_detection_commands.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,499 ! copying octoprint_octolapse/static/docs/help/profiles.printer.automatic_configuration.is_automatic.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,499 ! copying octoprint_octolapse/static/docs/help/profiles.printer.automatic_configuration.make.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,499 ! copying octoprint_octolapse/static/docs/help/profiles.printer.automatic_configuration.model.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,499 ! copying octoprint_octolapse/static/docs/help/profiles.printer.bed_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,499 ! copying octoprint_octolapse/static/docs/help/profiles.printer.custom_bounding_box.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,500 ! copying octoprint_octolapse/static/docs/help/profiles.printer.default_extruder.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,500 ! copying octoprint_octolapse/static/docs/help/profiles.printer.default_firmware_retractions.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,500 ! copying octoprint_octolapse/static/docs/help/profiles.printer.default_firmware_retractions_zhop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,500 ! copying octoprint_octolapse/static/docs/help/profiles.printer.e_axis_default_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,500 ! copying octoprint_octolapse/static/docs/help/profiles.printer.extruder_offsets.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,501 ! copying octoprint_octolapse/static/docs/help/profiles.printer.g90_influences_extruder.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,501 ! copying octoprint_octolapse/static/docs/help/profiles.printer.gocde_axis_compatibility_mode_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,501 ! copying octoprint_octolapse/static/docs/help/profiles.printer.home_axis_gcode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,501 ! copying octoprint_octolapse/static/docs/help/profiles.printer.invert_e.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,501 ! copying octoprint_octolapse/static/docs/help/profiles.printer.invert_x.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,501 ! copying octoprint_octolapse/static/docs/help/profiles.printer.invert_y.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,502 ! copying octoprint_octolapse/static/docs/help/profiles.printer.invert_z.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,502 ! copying octoprint_octolapse/static/docs/help/profiles.printer.minimum_layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,502 ! copying octoprint_octolapse/static/docs/help/profiles.printer.num_extruders.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,502 ! copying octoprint_octolapse/static/docs/help/profiles.printer.origin_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,502 ! copying octoprint_octolapse/static/docs/help/profiles.printer.override_octoprint_profile_settings.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,502 ! copying octoprint_octolapse/static/docs/help/profiles.printer.priming_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,503 ! copying octoprint_octolapse/static/docs/help/profiles.printer.restrict_snapshot_area.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,503 ! copying octoprint_octolapse/static/docs/help/profiles.printer.shared_extruder.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,503 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicer_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,503 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.automatic.continue_on_failure.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,503 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.automatic.disable_automatic_save.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,504 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.4_2.speed_z_hop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,504 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,504 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.max_feedrate_z_override.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,504 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_amount.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,504 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_enable.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,504 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_hop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,505 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_hop_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,505 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_prime_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,505 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_retract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,505 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.smooth_spiralized_contours.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,505 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.speed_travel.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,505 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.axis_speed_display_unit_options.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,506 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.deretract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,506 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,506 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.retract_before_move.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,506 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.retract_length.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,506 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.retract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,507 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.travel_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,507 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.vase_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,507 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.z_hop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,507 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.z_travel_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,507 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.extruder_use_retract.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,507 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,508 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.retraction_distance.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,508 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.retraction_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,508 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.retraction_vertical_lift.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,508 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.vase_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,508 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.x_y_axis_movement_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,508 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.z_axis_movement_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,509 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.deretract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,509 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,509 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.retract_length.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,509 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.retract_lift.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,509 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.retract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,510 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.travel_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,510 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.vase_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,510 ! copying octoprint_octolapse/static/docs/help/profiles.printer.snapshot_command.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,510 ! copying octoprint_octolapse/static/docs/help/profiles.printer.suppress_snapshot_command_always.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,510 ! copying octoprint_octolapse/static/docs/help/profiles.printer.units_default.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,510 ! copying octoprint_octolapse/static/docs/help/profiles.printer.xyz_axes_default_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,511 ! copying octoprint_octolapse/static/docs/help/profiles.printer.zero_based_extruder.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,511 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.archive_snapshots.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,511 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.bitrate.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,511 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.constant_rate_factor.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,511 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.enable_watermark.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,511 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,512 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.fps.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,512 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.fps_calculation_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,512 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.max_fps.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,512 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.min_fps.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,512 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.output_format.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,512 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.output_template.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,513 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_font_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,513 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_font_size.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,513 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_outline_color.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,513 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_outline_width.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,513 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_preview.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,513 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_alignment.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,514 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_color.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,514 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_halign.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,514 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_pos_xy.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,514 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_template.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,514 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_template_current_time.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,515 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_template_time_elapsed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,515 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_valign.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,515 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.post_roll_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,515 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.pre_roll_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,515 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.run_length_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,515 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.thread_count.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,516 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.wait_for_moves_to_finish.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,516 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_fixed_coordinate.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,516 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_fixed_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,516 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_fixed_path_invert_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,516 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_fixed_path_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,516 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_relative.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,517 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_relative_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,517 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_relative_path_invert_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,517 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_relative_path_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,517 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,517 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_fixed_coordinate.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,518 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_fixed_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,518 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_fixed_path_invert_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,518 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_fixed_path_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,518 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_relative.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,518 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_relative_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,518 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_relative_path_invert_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,519 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_relative_path_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,519 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,519 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.calculate_intersections.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,519 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.extruder_state_requirements_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,519 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.layer_trigger_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,519 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.position_restriction_shape.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,520 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.position_restriction_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,520 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.position_restrictions_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,520 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.require_zhop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,520 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.smart_layer_disable_z_lift.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,520 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.smart_layer_snap_to_print_high_quality.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,520 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.smart_layer_snap_to_print_smooth.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,521 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.smart_layer_trigger_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,521 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.timer_trigger_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,521 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.trigger_subtype.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,521 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.trigger_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,521 ! copying octoprint_octolapse/static/docs/help/quality_issues_fast_trigger.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,522 ! copying octoprint_octolapse/static/docs/help/quality_issues_low_quality_snap_to_print.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,522 ! copying octoprint_octolapse/static/docs/help/quality_issues_no_print_features_detected.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,522 ! copying octoprint_octolapse/static/docs/help/settings.import.import_method.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,522 ! copying octoprint_octolapse/static/docs/help/settings.import.import_text.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,522 ! copying octoprint_octolapse/static/docs/help/snapshot_plan_missed_snapshots.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:31:36,522 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/img
2023-05-09 13:31:36,523 ! copying octoprint_octolapse/static/img/watermark.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/img
2023-05-09 13:31:36,523 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:31:36,523 ! copying octoprint_octolapse/static/js/jquery.minicolors.min.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:31:36,523 ! copying octoprint_octolapse/static/js/jquery.validate.min.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:31:36,523 ! copying octoprint_octolapse/static/js/octolapse.dialog.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:31:36,523 ! copying octoprint_octolapse/static/js/octolapse.dialog.renderings.in_process.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:31:36,524 ! copying octoprint_octolapse/static/js/octolapse.dialog.renderings.unfinished.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:31:36,524 ! copying octoprint_octolapse/static/js/octolapse.dialog.timelapse_files.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:31:36,524 ! copying octoprint_octolapse/static/js/octolapse.file_browser.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:31:36,524 ! copying octoprint_octolapse/static/js/octolapse.help.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:31:36,524 ! copying octoprint_octolapse/static/js/octolapse.helpers.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:31:36,524 ! copying octoprint_octolapse/static/js/octolapse.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:31:36,525 ! copying octoprint_octolapse/static/js/octolapse.profiles.camera.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:31:36,525 ! copying octoprint_octolapse/static/js/octolapse.profiles.camera.webcam.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:31:36,525 ! copying octoprint_octolapse/static/js/octolapse.profiles.camera.webcam.mjpg_streamer.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:31:36,525 ! copying octoprint_octolapse/static/js/octolapse.profiles.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:31:36,525 ! copying octoprint_octolapse/static/js/octolapse.profiles.library.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:31:36,525 ! copying octoprint_octolapse/static/js/octolapse.profiles.logging.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:31:36,526 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:31:36,526 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.slicer.cura.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:31:36,526 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.slicer.other.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:31:36,526 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.slicer.simplify_3d.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:31:36,527 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.slicer.slic3r_pe.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:31:36,527 ! copying octoprint_octolapse/static/js/octolapse.profiles.rendering.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:31:36,527 ! copying octoprint_octolapse/static/js/octolapse.profiles.stabilization.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:31:36,527 ! copying octoprint_octolapse/static/js/octolapse.profiles.trigger.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:31:36,527 ! copying octoprint_octolapse/static/js/octolapse.settings.import.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:31:36,527 ! copying octoprint_octolapse/static/js/octolapse.settings.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:31:36,528 ! copying octoprint_octolapse/static/js/octolapse.settings.main.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:31:36,528 ! copying octoprint_octolapse/static/js/octolapse.status.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:31:36,528 ! copying octoprint_octolapse/static/js/octolapse.status.snapshotplan.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:31:36,528 ! copying octoprint_octolapse/static/js/octolapse.status.snapshotplan_preview.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:31:36,528 ! copying octoprint_octolapse/static/js/showdown.min.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:31:36,528 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js/webcams
2023-05-09 13:31:36,529 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js/webcams/mjpg_streamer
2023-05-09 13:31:36,529 ! copying octoprint_octolapse/static/js/webcams/mjpg_streamer/raspi_cam_v2.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js/webcams/mjpg_streamer
2023-05-09 13:31:36,530 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:31:36,530 ! copying octoprint_octolapse/templates/octolapse_dialog.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:31:36,530 ! copying octoprint_octolapse/templates/octolapse_dialog_rendering_in_process.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:31:36,530 ! copying octoprint_octolapse/templates/octolapse_dialog_rendering_unfinished.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:31:36,530 ! copying octoprint_octolapse/templates/octolapse_dialog_timelapse_files.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:31:36,530 ! copying octoprint_octolapse/templates/octolapse_file_browser.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:31:36,531 ! copying octoprint_octolapse/templates/octolapse_helpers.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:31:36,531 ! copying octoprint_octolapse/templates/octolapse_navbar.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:31:36,531 ! copying octoprint_octolapse/templates/octolapse_profile_dialog_add_edit.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:31:36,531 ! copying octoprint_octolapse/templates/octolapse_profiles.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:31:36,531 ! copying octoprint_octolapse/templates/octolapse_profiles_camera.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:31:36,531 ! copying octoprint_octolapse/templates/octolapse_profiles_camera_webcam.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:31:36,531 ! copying octoprint_octolapse/templates/octolapse_profiles_camera_webcam_mjpg_streamer.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:31:36,532 ! copying octoprint_octolapse/templates/octolapse_profiles_library.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:31:36,532 ! copying octoprint_octolapse/templates/octolapse_profiles_logging.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:31:36,532 ! copying octoprint_octolapse/templates/octolapse_profiles_printer.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:31:36,532 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_automatic.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:31:36,532 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_automatic.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:31:36,532 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_cura.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:31:36,533 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_cura_4.2.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:31:36,533 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_other.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:31:36,533 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_simplify3d.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:31:36,533 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_slic3r_pe.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:31:36,533 ! copying octoprint_octolapse/templates/octolapse_profiles_rendering.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:31:36,533 ! copying octoprint_octolapse/templates/octolapse_profiles_stabilization.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:31:36,534 ! copying octoprint_octolapse/templates/octolapse_profiles_trigger.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:31:36,534 ! copying octoprint_octolapse/templates/octolapse_settings.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:31:36,534 ! copying octoprint_octolapse/templates/octolapse_settings_import.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:31:36,534 ! copying octoprint_octolapse/templates/octolapse_settings_main.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:31:36,534 ! copying octoprint_octolapse/templates/octolapse_snapshot_plan.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:31:36,534 ! copying octoprint_octolapse/templates/octolapse_status_extruder.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:31:36,534 ! copying octoprint_octolapse/templates/octolapse_status_position.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:31:36,535 ! copying octoprint_octolapse/templates/octolapse_status_printer_state.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:31:36,535 ! copying octoprint_octolapse/templates/octolapse_status_snapshot_plan.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:31:36,535 ! copying octoprint_octolapse/templates/octolapse_status_triggers.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:31:36,535 ! copying octoprint_octolapse/templates/octolapse_tab.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:31:36,535 ! copying octoprint_octolapse/templates/octolapse_tab_latest_snapshot.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:31:36,535 ! copying octoprint_octolapse/templates/octolapse_tab_settings_current.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:31:36,536 ! copying octoprint_octolapse/templates/octolapse_tab_settings_current_cameras.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:31:36,536 ! copying octoprint_octolapse/templates/octolapse_tab_snapshot_plan_preview_popup.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:31:36,536 ! copying octoprint_octolapse/templates/octolapse_tab_webcam_settings_popup.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:31:36,536 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams
2023-05-09 13:31:36,536 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams/mjpg_streamer
2023-05-09 13:31:36,536 ! copying octoprint_octolapse/templates/webcams/mjpg_streamer/logitech_c250.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams/mjpg_streamer
2023-05-09 13:31:36,537 ! copying octoprint_octolapse/templates/webcams/mjpg_streamer/logitech_c920.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams/mjpg_streamer
2023-05-09 13:31:36,537 ! copying octoprint_octolapse/templates/webcams/mjpg_streamer/raspi_cam_v2.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams/mjpg_streamer
2023-05-09 13:31:36,537 ! UPDATING build/lib.linux-aarch64-cpython-310/octoprint_octolapse/_version.py
2023-05-09 13:31:36,537 ! set build/lib.linux-aarch64-cpython-310/octoprint_octolapse/_version.py to 'v0.4.2'
2023-05-09 13:31:36,537 ! running build_ext
2023-05-09 13:31:36,537 ! Compiling Octolapse Parser Extension with <distutils.unixccompiler.UnixCCompiler object at 0x721a76b460>.
2023-05-09 13:31:36,537 ! building 'GcodePositionProcessor' extension
2023-05-09 13:31:36,538 ! creating build/temp.linux-aarch64-cpython-310
2023-05-09 13:31:36,538 ! creating build/temp.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:31:36,538 ! creating build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:31:36,538 ! creating build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib
2023-05-09 13:31:36,538 ! creating build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:31:36,538 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/extruder.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/extruder.o -O3 -std=c++11
2023-05-09 13:31:36,538 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/gcode_comment_processor.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/gcode_comment_processor.o -O3 -std=c++11
2023-05-09 13:31:36,539 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.cpp: In member function 'void gcode_comment_processor::update_feature_from_section(position&) const':
2023-05-09 13:31:36,539 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.cpp:99:16: warning: enumeration value 'section_type_no_section' not handled in switch [-Wswitch]
2023-05-09 13:31:36,539 ! 99 |         switch (current_section_)
2023-05-09 13:31:36,539 ! |                ^
2023-05-09 13:31:36,539 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/gcode_parser.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/gcode_parser.o -O3 -std=c++11
2023-05-09 13:31:36,539 ! octoprint_octolapse/data/lib/c/gcode_parser.cpp: In member function 'bool gcode_parser::try_parse_gcode(const char*, parsed_command&)':
2023-05-09 13:31:36,540 ! octoprint_octolapse/data/lib/c/gcode_parser.cpp:148:47: warning: suggest parentheses around '&&' within '||' [-Wparentheses]
2023-05-09 13:31:36,540 ! 148 |     else if (cur_char > 32 || cur_char == ' ' && has_seen_character)
2023-05-09 13:31:36,540 ! |                               ~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:31:36,540 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/gcode_position.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/gcode_position.o -O3 -std=c++11
2023-05-09 13:31:36,540 ! octoprint_octolapse/data/lib/c/gcode_position.cpp: In member function 'void gcode_position::add_position(position&)':
2023-05-09 13:31:36,540 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:395:12: warning: operation on '((gcode_position*)this)->gcode_position::cur_pos_' may be undefined [-Wsequence-point]
2023-05-09 13:31:36,541 ! 395 |   cur_pos_ = (++cur_pos_) % NUM_POSITIONS;
2023-05-09 13:31:36,541 ! octoprint_octolapse/data/lib/c/gcode_position.cpp: In member function 'void gcode_position::add_position(parsed_command&)':
2023-05-09 13:31:36,541 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:402:12: warning: operation on '((gcode_position*)this)->gcode_position::cur_pos_' may be undefined [-Wsequence-point]
2023-05-09 13:31:36,541 ! 402 |   cur_pos_ = (++cur_pos_) % NUM_POSITIONS;
2023-05-09 13:31:36,541 ! octoprint_octolapse/data/lib/c/gcode_position.cpp: In member function 'void gcode_position::update(parsed_command&, long int, long int, long int)':
2023-05-09 13:31:36,541 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:659:31: warning: comparison of integer expressions of different signedness: 'const unsigned int' and 'int' [-Wsign-compare]
2023-05-09 13:31:36,541 ! 659 |                 if (increment > p_current_pos->height_increment && increment > 1)
2023-05-09 13:31:36,542 ! |                     ~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:31:36,542 ! octoprint_octolapse/data/lib/c/gcode_position.cpp: In member function 'void gcode_position::process_g10(position*, parsed_command&)':
2023-05-09 13:31:36,542 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:952:10: warning: variable 's' set but not used [-Wunused-but-set-variable]
2023-05-09 13:31:36,542 ! 952 |   double s = 0;
2023-05-09 13:31:36,542 ! |          ^
2023-05-09 13:31:36,542 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:953:8: warning: variable 'has_s' set but not used [-Wunused-but-set-variable]
2023-05-09 13:31:36,543 ! 953 |   bool has_s = false;
2023-05-09 13:31:36,543 ! |        ^~~~~
2023-05-09 13:31:36,543 ! In file included from octoprint_octolapse/data/lib/c/gcode_position.h:29,
2023-05-09 13:31:36,543 ! from octoprint_octolapse/data/lib/c/gcode_position.cpp:22:
2023-05-09 13:31:36,543 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h: At global scope:
2023-05-09 13:31:36,543 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:77:20: warning: 'SLICER_PE_SKIRT_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:31:36,543 ! 77 | static const char* SLICER_PE_SKIRT_COMMENTS[] = {"skirt", "move to first skirt point", NULL};
2023-05-09 13:31:36,544 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:31:36,544 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:73:20: warning: 'SLICER_PE_BRIDGE_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:31:36,544 ! 73 | static const char* SLICER_PE_BRIDGE_COMMENTS[] = {
2023-05-09 13:31:36,544 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:31:36,544 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:72:20: warning: 'SLICER_PE_GAP_FILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:31:36,544 ! 72 | static const char* SLICER_PE_GAP_FILL_COMMENTS[] = {"gap fill", "move to first gap fill point", NULL};
2023-05-09 13:31:36,544 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:31:36,545 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:69:20: warning: 'SLICER_PE_SOLID_INFILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:31:36,545 ! 69 | static const char* SLICER_PE_SOLID_INFILL_COMMENTS[] = {
2023-05-09 13:31:36,545 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:31:36,545 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:68:20: warning: 'SLICER_PE_INFILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:31:36,545 ! 68 | static const char* SLICER_PE_INFILL_COMMENTS[] = {"infill", "move to first infill point", NULL};
2023-05-09 13:31:36,545 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:31:36,546 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:67:20: warning: 'SLICER_PE_UNKNOWN_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:31:36,546 ! 67 | static const char* SLICER_PE_UNKNOWN_PERIMETER_COMMENTS[] = {"perimeter", "move to first perimeter point", NULL};
2023-05-09 13:31:36,546 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:31:36,546 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:64:20: warning: 'SLICER_PE_INNER_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:31:36,546 ! 64 | static const char* SLICER_PE_INNER_PERIMETER_COMMENTS[] = {
2023-05-09 13:31:36,546 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:31:36,546 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:61:20: warning: 'SLICER_PE_OUTER_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:31:36,547 ! 61 | static const char* SLICER_PE_OUTER_PERIMETER_COMMENTS[] = {
2023-05-09 13:31:36,547 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:31:36,547 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/gcode_position_processor.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/gcode_position_processor.o -O3 -std=c++11
2023-05-09 13:31:36,547 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:915: warning: ignoring '#pragma region location_detection_commands' [-Wunknown-pragmas]
2023-05-09 13:31:36,547 ! 915 | #pragma region location_detection_commands
2023-05-09 13:31:36,547 ! |
2023-05-09 13:31:36,548 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:955: warning: ignoring '#pragma endregion Parse' [-Wunknown-pragmas]
2023-05-09 13:31:36,548 ! 955 | #pragma endregion Parse the list of location detection commands
2023-05-09 13:31:36,548 ! |
2023-05-09 13:31:36,548 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1122: warning: ignoring '#pragma region Extract' [-Wunknown-pragmas]
2023-05-09 13:31:36,548 ! 1122 | #pragma region Extract extruder objects
2023-05-09 13:31:36,548 ! |
2023-05-09 13:31:36,549 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1219: warning: ignoring '#pragma endregion Parse' [-Wunknown-pragmas]
2023-05-09 13:31:36,549 ! 1219 | #pragma endregion Parse extruder objects
2023-05-09 13:31:36,549 ! |
2023-05-09 13:31:36,549 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1221: warning: ignoring '#pragma region Extract' [-Wunknown-pragmas]
2023-05-09 13:31:36,549 ! 1221 | #pragma region Extract firmware extruder offsets from the printer settings
2023-05-09 13:31:36,549 ! |
2023-05-09 13:31:36,549 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1334: warning: ignoring '#pragma endregion Extract' [-Wunknown-pragmas]
2023-05-09 13:31:36,550 ! 1334 | #pragma endregion Extract firmware extruder offsets from the printer settings
2023-05-09 13:31:36,550 ! |
2023-05-09 13:31:36,550 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp: In function 'int main(int, char**)':
2023-05-09 13:31:36,550 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:56:27: warning: 'void PyEval_InitThreads()' is deprecated [-Wdeprecated-declarations]
2023-05-09 13:31:36,550 ! 56 |         PyEval_InitThreads();
2023-05-09 13:31:36,550 ! |         ~~~~~~~~~~~~~~~~~~^~
2023-05-09 13:31:36,551 ! In file included from /usr/include/python3.10/Python.h:130,
2023-05-09 13:31:36,551 ! from octoprint_octolapse/data/lib/c/gcode_position_processor.h:30,
2023-05-09 13:31:36,551 ! from octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:23:
2023-05-09 13:31:36,551 ! /usr/include/python3.10/ceval.h:122:37: note: declared here
2023-05-09 13:31:36,551 ! 122 | Py_DEPRECATED(3.9) PyAPI_FUNC(void) PyEval_InitThreads(void);
2023-05-09 13:31:36,551 ! |                                     ^~~~~~~~~~~~~~~~~~
2023-05-09 13:31:36,551 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp: In function 'PyObject* Initialize(PyObject*, PyObject*)':
2023-05-09 13:31:36,552 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:371:19: warning: unused variable 'p_gcode_position' [-Wunused-variable]
2023-05-09 13:31:36,552 ! 371 |   gcode_position* p_gcode_position = NULL;
2023-05-09 13:31:36,552 ! |                   ^~~~~~~~~~~~~~~~
2023-05-09 13:31:36,552 ! In file included from /usr/include/c++/12.2.1/bits/cxxabi_init_exception.h:38,
2023-05-09 13:31:36,552 ! from /usr/include/c++/12.2.1/bits/exception_ptr.h:38,
2023-05-09 13:31:36,552 ! from /usr/include/c++/12.2.1/exception:168,
2023-05-09 13:31:36,552 ! from /usr/include/c++/12.2.1/stdexcept:38,
2023-05-09 13:31:36,553 ! from /usr/include/c++/12.2.1/system_error:41,
2023-05-09 13:31:36,553 ! from /usr/include/c++/12.2.1/bits/ios_base.h:46,
2023-05-09 13:31:36,553 ! from /usr/include/c++/12.2.1/iomanip:40,
2023-05-09 13:31:36,553 ! from octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:24:
2023-05-09 13:31:36,553 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp: In function 'bool ParseStabilizationArgs(PyObject*, stabilization_args*, PyObject**, PyObject**)':
2023-05-09 13:31:36,553 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1406:12: error: converting to 'bool' from 'std::nullptr_t' requires direct-initialization [-fpermissive]
2023-05-09 13:31:36,554 ! 1406 |     return NULL;
2023-05-09 13:31:36,554 ! |            ^~~~
2023-05-09 13:31:36,554 ! In file included from octoprint_octolapse/data/lib/c/gcode_position_processor.h:37:
2023-05-09 13:31:36,554 ! octoprint_octolapse/data/lib/c/stabilization_smart_gcode.h: At global scope:
2023-05-09 13:31:36,554 ! octoprint_octolapse/data/lib/c/stabilization_smart_gcode.h:5:20: warning: 'SMART_GCODE_STABILIZATION' defined but not used [-Wunused-variable]
2023-05-09 13:31:36,554 ! 5 | static const char* SMART_GCODE_STABILIZATION = "smart_gcode";
2023-05-09 13:31:36,554 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:31:36,555 ! In file included from octoprint_octolapse/data/lib/c/gcode_position_processor.h:36:
2023-05-09 13:31:36,555 ! octoprint_octolapse/data/lib/c/stabilization_smart_layer.h:11:20: warning: 'SMART_LAYER_STABILIZATION' defined but not used [-Wunused-variable]
2023-05-09 13:31:36,555 ! 11 | static const char* SMART_LAYER_STABILIZATION = "smart_layer";
2023-05-09 13:31:36,555 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:31:36,555 ! In file included from octoprint_octolapse/data/lib/c/gcode_position_processor.h:35:
2023-05-09 13:31:36,555 ! octoprint_octolapse/data/lib/c/stabilization.h:44:20: warning: 'send_parsed_command_never' defined but not used [-Wunused-variable]
2023-05-09 13:31:36,555 ! 44 | static const char* send_parsed_command_never = "never";
2023-05-09 13:31:36,556 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:31:36,556 ! octoprint_octolapse/data/lib/c/stabilization.h:43:20: warning: 'send_parsed_command_last' defined but not used [-Wunused-variable]
2023-05-09 13:31:36,556 ! 43 | static const char* send_parsed_command_last = "last";
2023-05-09 13:31:36,556 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:31:36,556 ! octoprint_octolapse/data/lib/c/stabilization.h:42:20: warning: 'send_parsed_command_first' defined but not used [-Wunused-variable]
2023-05-09 13:31:36,556 ! 42 | static const char* send_parsed_command_first = "first";
2023-05-09 13:31:36,556 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:31:36,557 ! octoprint_octolapse/data/lib/c/stabilization.h:41:20: warning: 'snapshot_action' defined but not used [-Wunused-variable]
2023-05-09 13:31:36,557 ! 41 | static const char* snapshot_action = "snapshot";
2023-05-09 13:31:36,557 ! |                    ^~~~~~~~~~~~~~~
2023-05-09 13:31:36,557 ! octoprint_octolapse/data/lib/c/stabilization.h:40:20: warning: 'travel_action' defined but not used [-Wunused-variable]
2023-05-09 13:31:36,557 ! 40 | static const char* travel_action = "travel";
2023-05-09 13:31:36,557 ! |                    ^~~~~~~~~~~~~
2023-05-09 13:31:36,558 ! In file included from octoprint_octolapse/data/lib/c/gcode_position.h:29,
2023-05-09 13:31:36,558 ! from octoprint_octolapse/data/lib/c/gcode_position_processor.h:33:
2023-05-09 13:31:36,558 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:77:20: warning: 'SLICER_PE_SKIRT_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:31:36,558 ! 77 | static const char* SLICER_PE_SKIRT_COMMENTS[] = {"skirt", "move to first skirt point", NULL};
2023-05-09 13:31:36,558 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:31:36,558 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:73:20: warning: 'SLICER_PE_BRIDGE_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:31:36,559 ! 73 | static const char* SLICER_PE_BRIDGE_COMMENTS[] = {
2023-05-09 13:31:36,559 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:31:36,559 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:72:20: warning: 'SLICER_PE_GAP_FILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:31:36,559 ! 72 | static const char* SLICER_PE_GAP_FILL_COMMENTS[] = {"gap fill", "move to first gap fill point", NULL};
2023-05-09 13:31:36,559 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:31:36,559 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:69:20: warning: 'SLICER_PE_SOLID_INFILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:31:36,560 ! 69 | static const char* SLICER_PE_SOLID_INFILL_COMMENTS[] = {
2023-05-09 13:31:36,560 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:31:36,560 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:68:20: warning: 'SLICER_PE_INFILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:31:36,561 ! 68 | static const char* SLICER_PE_INFILL_COMMENTS[] = {"infill", "move to first infill point", NULL};
2023-05-09 13:31:36,561 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:31:36,561 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:67:20: warning: 'SLICER_PE_UNKNOWN_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:31:36,561 ! 67 | static const char* SLICER_PE_UNKNOWN_PERIMETER_COMMENTS[] = {"perimeter", "move to first perimeter point", NULL};
2023-05-09 13:31:36,561 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:31:36,561 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:64:20: warning: 'SLICER_PE_INNER_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:31:36,561 ! 64 | static const char* SLICER_PE_INNER_PERIMETER_COMMENTS[] = {
2023-05-09 13:31:36,562 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:31:36,562 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:61:20: warning: 'SLICER_PE_OUTER_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:31:36,562 ! 61 | static const char* SLICER_PE_OUTER_PERIMETER_COMMENTS[] = {
2023-05-09 13:31:36,562 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:31:36,562 ! error: command '/usr/bin/gcc' failed with exit code 1
2023-05-09 13:31:36,562 ! [end of output]
2023-05-09 13:31:36,562 ! 
2023-05-09 13:31:36,563 ! note: This error originates from a subprocess, and is likely not a problem with pip.
2023-05-09 13:31:36,563 ! error: legacy-install-failure
2023-05-09 13:31:36,563 ! 
2023-05-09 13:31:36,563 ! × Encountered error while trying to install package.
2023-05-09 13:31:36,563 ! ╰─> Octolapse
2023-05-09 13:31:36,563 ! 
2023-05-09 13:31:36,564 ! note: This is an issue with the package mentioned above, not pip.
2023-05-09 13:31:36,564 ! hint: See above for output from the failure.
2023-05-09 13:31:38,582 * Looks like the plugin was already installed. Forcing a reinstall.
2023-05-09 13:31:38,601   /usr/bin/python3 -m pip --disable-pip-version-check install file:///tmp/tmp_3619yr9/Octolapse-master.zip --no-cache-dir --ignore-installed --force-reinstall --no-deps
2023-05-09 13:31:46,714 > Processing /tmp/tmp_3619yr9/Octolapse-master.zip
2023-05-09 13:31:49,746 > Preparing metadata (setup.py): started
2023-05-09 13:32:07,940 > Preparing metadata (setup.py): finished with status 'done'
2023-05-09 13:32:07,941 > Installing collected packages: Octolapse
2023-05-09 13:32:07,942 > Running setup.py install for Octolapse: started
2023-05-09 13:32:08,450 ! DEPRECATION: Octolapse is being installed using the legacy 'setup.py install' method, because it does not have a 'pyproject.toml' and the 'wheel' package is not installed. pip 23.1 will enforce this behaviour change. A possible replacement is to enable the '--use-pep517' option. Discussion can be found at https://github.com/pypa/pip/issues/8559
2023-05-09 13:33:10,115 > Running setup.py install for Octolapse: still running...
2023-05-09 13:33:11,131 > Running setup.py install for Octolapse: finished with status 'error'
2023-05-09 13:33:11,764 ! error: subprocess-exited-with-error
2023-05-09 13:33:11,766 ! 
2023-05-09 13:33:11,769 ! × Running setup.py install for Octolapse did not run successfully.
2023-05-09 13:33:11,770 ! │ exit code: 1
2023-05-09 13:33:11,771 ! ╰─> [1152 lines of output]
2023-05-09 13:33:11,771 ! likely tags: v0.4.2
2023-05-09 13:33:11,771 ! picking v0.4.2
2023-05-09 13:33:11,772 ! got version from expanded keyword {'version': 'v0.4.2', 'full-revisionid': 'c6c86782cdbfc3590fa4b1bf2e63064eb459b16b', 'dirty': False, 'error': None, 'date': '2023-04-02T10:23:21-0500'}
2023-05-09 13:33:11,772 ! Argon2 passlib backend is not available, not using it for password hashing
2023-05-09 13:33:11,773 ! /tmp/pip-req-build-bw8wrelh/setup.py:58: DeprecationWarning: distutils Version classes are deprecated. Use packaging.version instead.
2023-05-09 13:33:11,773 ! if LooseVersion(octoprint.server.VERSION) < LooseVersion("1.4"):
2023-05-09 13:33:11,773 ! Found packages: {'octoprint_octolapse_setuptools', 'octoprint_octolapse.test', 'octoprint_octolapse'}
2023-05-09 13:33:11,774 ! running install
2023-05-09 13:33:11,774 ! /usr/lib/python3.10/site-packages/setuptools/command/install.py:34: SetuptoolsDeprecationWarning: setup.py install is deprecated. Use build and pip and other standards-based tools.
2023-05-09 13:33:11,775 ! warnings.warn(
2023-05-09 13:33:11,775 ! running build
2023-05-09 13:33:11,776 ! running build_py
2023-05-09 13:33:11,776 ! creating build
2023-05-09 13:33:11,777 ! creating build/lib.linux-aarch64-cpython-310
2023-05-09 13:33:11,777 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse_setuptools
2023-05-09 13:33:11,778 ! copying octoprint_octolapse_setuptools/__init__.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse_setuptools
2023-05-09 13:33:11,778 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:33:11,778 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:33:11,779 ! copying octoprint_octolapse/test/test_settings.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:33:11,779 ! copying octoprint_octolapse/test/test_trigger_layer.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:33:11,780 ! copying octoprint_octolapse/test/__init__.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:33:11,780 ! copying octoprint_octolapse/test/test_extruder.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:33:11,780 ! copying octoprint_octolapse/test/test_parsing.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:33:11,781 ! copying octoprint_octolapse/test/test_render.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:33:11,781 ! copying octoprint_octolapse/test/test_timelapse.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:33:11,781 ! copying octoprint_octolapse/test/test_intersection.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:33:11,782 ! copying octoprint_octolapse/test/test_trigger_gcode.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:33:11,782 ! copying octoprint_octolapse/test/testing_utilities.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:33:11,782 ! copying octoprint_octolapse/test/test_octolapseplugin.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:33:11,783 ! copying octoprint_octolapse/test/test_position.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:33:11,783 ! copying octoprint_octolapse/test/test_trigger_timer.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:33:11,783 ! copying octoprint_octolapse/test/test_command.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:33:11,784 ! copying octoprint_octolapse/test/test_settings_slicer.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:33:11,784 ! copying octoprint_octolapse/test/test_utility.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:33:11,784 ! copying octoprint_octolapse/test/test_snapshotGcode.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:33:11,785 ! copying octoprint_octolapse/test/test_migration_version.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:33:11,785 ! copying octoprint_octolapse/test/test_trigger.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:33:11,786 ! copying octoprint_octolapse/snapshot.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:33:11,786 ! copying octoprint_octolapse/log.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:33:11,787 ! copying octoprint_octolapse/__init__.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:33:11,787 ! copying octoprint_octolapse/messenger_worker.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:33:11,788 ! copying octoprint_octolapse/gcode_processor.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:33:11,789 ! copying octoprint_octolapse/gcode_commands.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:33:11,789 ! copying octoprint_octolapse/camera.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:33:11,790 ! copying octoprint_octolapse/position.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:33:11,790 ! copying octoprint_octolapse/stabilization_preprocessing.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:33:11,790 ! copying octoprint_octolapse/utility.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:33:11,791 ! copying octoprint_octolapse/settings_external.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:33:11,791 ! copying octoprint_octolapse/render.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:33:11,791 ! copying octoprint_octolapse/settings_preprocessor.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:33:11,792 ! copying octoprint_octolapse/script.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:33:11,794 ! copying octoprint_octolapse/migration.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:33:11,796 ! copying octoprint_octolapse/_version.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:33:11,796 ! copying octoprint_octolapse/stabilization_gcode.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:33:11,797 ! copying octoprint_octolapse/settings.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:33:11,798 ! copying octoprint_octolapse/error_messages.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:33:11,798 ! copying octoprint_octolapse/trigger.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:33:11,798 ! copying octoprint_octolapse/timelapse.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:33:11,799 ! running egg_info
2023-05-09 13:33:11,799 ! creating Octolapse.egg-info
2023-05-09 13:33:11,799 ! writing Octolapse.egg-info/PKG-INFO
2023-05-09 13:33:11,800 ! writing dependency_links to Octolapse.egg-info/dependency_links.txt
2023-05-09 13:33:11,800 ! writing entry points to Octolapse.egg-info/entry_points.txt
2023-05-09 13:33:11,800 ! writing requirements to Octolapse.egg-info/requires.txt
2023-05-09 13:33:11,801 ! writing top-level names to Octolapse.egg-info/top_level.txt
2023-05-09 13:33:11,801 ! writing manifest file 'Octolapse.egg-info/SOURCES.txt'
2023-05-09 13:33:11,801 ! reading manifest file 'Octolapse.egg-info/SOURCES.txt'
2023-05-09 13:33:11,802 ! reading manifest template 'MANIFEST.in'
2023-05-09 13:33:11,802 ! warning: no files found matching 'README.md'
2023-05-09 13:33:11,802 ! warning: no files found matching '*' under directory 'octoprint_octolapse/translations'
2023-05-09 13:33:11,803 ! warning: no files found matching '*' under directory 'octoprint_octolapse/data/images'
2023-05-09 13:33:11,803 ! adding license file 'LICENSE'
2023-05-09 13:33:11,803 ! writing manifest file 'Octolapse.egg-info/SOURCES.txt'
2023-05-09 13:33:11,803 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data' as data is deprecated, please list it in `packages`.
2023-05-09 13:33:11,804 ! !!
2023-05-09 13:33:11,804 ! 
2023-05-09 13:33:11,804 ! 
2023-05-09 13:33:11,805 ! ############################
2023-05-09 13:33:11,805 ! # Package would be ignored #
2023-05-09 13:33:11,805 ! ############################
2023-05-09 13:33:11,806 ! Python recognizes 'octoprint_octolapse.data' as an importable package,
2023-05-09 13:33:11,806 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:33:11,806 ! 
2023-05-09 13:33:11,807 ! 'octoprint_octolapse.data' has been automatically added to the distribution only
2023-05-09 13:33:11,807 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:33:11,807 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:33:11,808 ! 
2023-05-09 13:33:11,808 ! Please make sure that 'octoprint_octolapse.data' is included as a package by using
2023-05-09 13:33:11,808 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:33:11,809 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:33:11,809 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:33:11,809 ! 
2023-05-09 13:33:11,810 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:33:11,810 ! documentation page.
2023-05-09 13:33:11,810 ! 
2023-05-09 13:33:11,811 ! 
2023-05-09 13:33:11,811 ! !!
2023-05-09 13:33:11,811 ! 
2023-05-09 13:33:11,811 ! check.warn(importable)
2023-05-09 13:33:11,812 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.Images' as data is deprecated, please list it in `packages`.
2023-05-09 13:33:11,812 ! !!
2023-05-09 13:33:11,812 ! 
2023-05-09 13:33:11,813 ! 
2023-05-09 13:33:11,813 ! ############################
2023-05-09 13:33:11,813 ! # Package would be ignored #
2023-05-09 13:33:11,814 ! ############################
2023-05-09 13:33:11,814 ! Python recognizes 'octoprint_octolapse.data.Images' as an importable package,
2023-05-09 13:33:11,814 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:33:11,815 ! 
2023-05-09 13:33:11,815 ! 'octoprint_octolapse.data.Images' has been automatically added to the distribution only
2023-05-09 13:33:11,815 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:33:11,816 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:33:11,816 ! 
2023-05-09 13:33:11,816 ! Please make sure that 'octoprint_octolapse.data.Images' is included as a package by using
2023-05-09 13:33:11,817 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:33:11,817 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:33:11,817 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:33:11,818 ! 
2023-05-09 13:33:11,818 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:33:11,818 ! documentation page.
2023-05-09 13:33:11,819 ! 
2023-05-09 13:33:11,819 ! 
2023-05-09 13:33:11,819 ! !!
2023-05-09 13:33:11,820 ! 
2023-05-09 13:33:11,820 ! check.warn(importable)
2023-05-09 13:33:11,820 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.fonts.DejaVu' as data is deprecated, please list it in `packages`.
2023-05-09 13:33:11,821 ! !!
2023-05-09 13:33:11,821 ! 
2023-05-09 13:33:11,821 ! 
2023-05-09 13:33:11,821 ! ############################
2023-05-09 13:33:11,822 ! # Package would be ignored #
2023-05-09 13:33:11,822 ! ############################
2023-05-09 13:33:11,822 ! Python recognizes 'octoprint_octolapse.data.fonts.DejaVu' as an importable package,
2023-05-09 13:33:11,823 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:33:11,823 ! 
2023-05-09 13:33:11,823 ! 'octoprint_octolapse.data.fonts.DejaVu' has been automatically added to the distribution only
2023-05-09 13:33:11,824 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:33:11,824 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:33:11,824 ! 
2023-05-09 13:33:11,825 ! Please make sure that 'octoprint_octolapse.data.fonts.DejaVu' is included as a package by using
2023-05-09 13:33:11,825 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:33:11,825 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:33:11,825 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:33:11,825 ! 
2023-05-09 13:33:11,826 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:33:11,826 ! documentation page.
2023-05-09 13:33:11,826 ! 
2023-05-09 13:33:11,826 ! 
2023-05-09 13:33:11,826 ! !!
2023-05-09 13:33:11,827 ! 
2023-05-09 13:33:11,827 ! check.warn(importable)
2023-05-09 13:33:11,827 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.lib.c' as data is deprecated, please list it in `packages`.
2023-05-09 13:33:11,827 ! !!
2023-05-09 13:33:11,827 ! 
2023-05-09 13:33:11,827 ! 
2023-05-09 13:33:11,828 ! ############################
2023-05-09 13:33:11,828 ! # Package would be ignored #
2023-05-09 13:33:11,828 ! ############################
2023-05-09 13:33:11,828 ! Python recognizes 'octoprint_octolapse.data.lib.c' as an importable package,
2023-05-09 13:33:11,829 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:33:11,829 ! 
2023-05-09 13:33:11,829 ! 'octoprint_octolapse.data.lib.c' has been automatically added to the distribution only
2023-05-09 13:33:11,829 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:33:11,829 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:33:11,829 ! 
2023-05-09 13:33:11,830 ! Please make sure that 'octoprint_octolapse.data.lib.c' is included as a package by using
2023-05-09 13:33:11,830 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:33:11,830 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:33:11,830 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:33:11,830 ! 
2023-05-09 13:33:11,831 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:33:11,831 ! documentation page.
2023-05-09 13:33:11,831 ! 
2023-05-09 13:33:11,831 ! 
2023-05-09 13:33:11,831 ! !!
2023-05-09 13:33:11,832 ! 
2023-05-09 13:33:11,832 ! check.warn(importable)
2023-05-09 13:33:11,832 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.scripts.gcode.cura' as data is deprecated, please list it in `packages`.
2023-05-09 13:33:11,832 ! !!
2023-05-09 13:33:11,832 ! 
2023-05-09 13:33:11,833 ! 
2023-05-09 13:33:11,833 ! ############################
2023-05-09 13:33:11,833 ! # Package would be ignored #
2023-05-09 13:33:11,833 ! ############################
2023-05-09 13:33:11,833 ! Python recognizes 'octoprint_octolapse.data.scripts.gcode.cura' as an importable package,
2023-05-09 13:33:11,834 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:33:11,834 ! 
2023-05-09 13:33:11,834 ! 'octoprint_octolapse.data.scripts.gcode.cura' has been automatically added to the distribution only
2023-05-09 13:33:11,834 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:33:11,834 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:33:11,835 ! 
2023-05-09 13:33:11,835 ! Please make sure that 'octoprint_octolapse.data.scripts.gcode.cura' is included as a package by using
2023-05-09 13:33:11,835 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:33:11,835 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:33:11,835 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:33:11,836 ! 
2023-05-09 13:33:11,836 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:33:11,836 ! documentation page.
2023-05-09 13:33:11,836 ! 
2023-05-09 13:33:11,836 ! 
2023-05-09 13:33:11,837 ! !!
2023-05-09 13:33:11,837 ! 
2023-05-09 13:33:11,837 ! check.warn(importable)
2023-05-09 13:33:11,837 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.scripts.linux' as data is deprecated, please list it in `packages`.
2023-05-09 13:33:11,837 ! !!
2023-05-09 13:33:11,838 ! 
2023-05-09 13:33:11,838 ! 
2023-05-09 13:33:11,838 ! ############################
2023-05-09 13:33:11,838 ! # Package would be ignored #
2023-05-09 13:33:11,838 ! ############################
2023-05-09 13:33:11,839 ! Python recognizes 'octoprint_octolapse.data.scripts.linux' as an importable package,
2023-05-09 13:33:11,839 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:33:11,839 ! 
2023-05-09 13:33:11,839 ! 'octoprint_octolapse.data.scripts.linux' has been automatically added to the distribution only
2023-05-09 13:33:11,839 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:33:11,839 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:33:11,840 ! 
2023-05-09 13:33:11,840 ! Please make sure that 'octoprint_octolapse.data.scripts.linux' is included as a package by using
2023-05-09 13:33:11,840 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:33:11,840 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:33:11,840 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:33:11,841 ! 
2023-05-09 13:33:11,841 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:33:11,841 ! documentation page.
2023-05-09 13:33:11,841 ! 
2023-05-09 13:33:11,842 ! 
2023-05-09 13:33:11,842 ! !!
2023-05-09 13:33:11,842 ! 
2023-05-09 13:33:11,842 ! check.warn(importable)
2023-05-09 13:33:11,842 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.scripts.windows' as data is deprecated, please list it in `packages`.
2023-05-09 13:33:11,842 ! !!
2023-05-09 13:33:11,843 ! 
2023-05-09 13:33:11,843 ! 
2023-05-09 13:33:11,843 ! ############################
2023-05-09 13:33:11,843 ! # Package would be ignored #
2023-05-09 13:33:11,843 ! ############################
2023-05-09 13:33:11,844 ! Python recognizes 'octoprint_octolapse.data.scripts.windows' as an importable package,
2023-05-09 13:33:11,844 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:33:11,844 ! 
2023-05-09 13:33:11,844 ! 'octoprint_octolapse.data.scripts.windows' has been automatically added to the distribution only
2023-05-09 13:33:11,844 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:33:11,845 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:33:11,845 ! 
2023-05-09 13:33:11,845 ! Please make sure that 'octoprint_octolapse.data.scripts.windows' is included as a package by using
2023-05-09 13:33:11,845 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:33:11,845 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:33:11,846 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:33:11,846 ! 
2023-05-09 13:33:11,846 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:33:11,846 ! documentation page.
2023-05-09 13:33:11,846 ! 
2023-05-09 13:33:11,847 ! 
2023-05-09 13:33:11,847 ! !!
2023-05-09 13:33:11,847 ! 
2023-05-09 13:33:11,847 ! check.warn(importable)
2023-05-09 13:33:11,847 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.templates' as data is deprecated, please list it in `packages`.
2023-05-09 13:33:11,848 ! !!
2023-05-09 13:33:11,848 ! 
2023-05-09 13:33:11,848 ! 
2023-05-09 13:33:11,848 ! ############################
2023-05-09 13:33:11,848 ! # Package would be ignored #
2023-05-09 13:33:11,848 ! ############################
2023-05-09 13:33:11,849 ! Python recognizes 'octoprint_octolapse.data.templates' as an importable package,
2023-05-09 13:33:11,849 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:33:11,849 ! 
2023-05-09 13:33:11,849 ! 'octoprint_octolapse.data.templates' has been automatically added to the distribution only
2023-05-09 13:33:11,849 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:33:11,850 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:33:11,850 ! 
2023-05-09 13:33:11,850 ! Please make sure that 'octoprint_octolapse.data.templates' is included as a package by using
2023-05-09 13:33:11,850 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:33:11,850 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:33:11,851 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:33:11,851 ! 
2023-05-09 13:33:11,851 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:33:11,851 ! documentation page.
2023-05-09 13:33:11,851 ! 
2023-05-09 13:33:11,852 ! 
2023-05-09 13:33:11,852 ! !!
2023-05-09 13:33:11,852 ! 
2023-05-09 13:33:11,852 ! check.warn(importable)
2023-05-09 13:33:11,852 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.webcam_types' as data is deprecated, please list it in `packages`.
2023-05-09 13:33:11,853 ! !!
2023-05-09 13:33:11,853 ! 
2023-05-09 13:33:11,853 ! 
2023-05-09 13:33:11,853 ! ############################
2023-05-09 13:33:11,853 ! # Package would be ignored #
2023-05-09 13:33:11,854 ! ############################
2023-05-09 13:33:11,854 ! Python recognizes 'octoprint_octolapse.data.webcam_types' as an importable package,
2023-05-09 13:33:11,854 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:33:11,854 ! 
2023-05-09 13:33:11,854 ! 'octoprint_octolapse.data.webcam_types' has been automatically added to the distribution only
2023-05-09 13:33:11,855 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:33:11,855 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:33:11,855 ! 
2023-05-09 13:33:11,855 ! Please make sure that 'octoprint_octolapse.data.webcam_types' is included as a package by using
2023-05-09 13:33:11,855 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:33:11,856 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:33:11,856 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:33:11,856 ! 
2023-05-09 13:33:11,856 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:33:11,856 ! documentation page.
2023-05-09 13:33:11,857 ! 
2023-05-09 13:33:11,857 ! 
2023-05-09 13:33:11,857 ! !!
2023-05-09 13:33:11,857 ! 
2023-05-09 13:33:11,857 ! check.warn(importable)
2023-05-09 13:33:11,858 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.webcam_types.mjpg_streamer' as data is deprecated, please list it in `packages`.
2023-05-09 13:33:11,858 ! !!
2023-05-09 13:33:11,858 ! 
2023-05-09 13:33:11,858 ! 
2023-05-09 13:33:11,858 ! ############################
2023-05-09 13:33:11,859 ! # Package would be ignored #
2023-05-09 13:33:11,859 ! ############################
2023-05-09 13:33:11,859 ! Python recognizes 'octoprint_octolapse.data.webcam_types.mjpg_streamer' as an importable package,
2023-05-09 13:33:11,859 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:33:11,859 ! 
2023-05-09 13:33:11,859 ! 'octoprint_octolapse.data.webcam_types.mjpg_streamer' has been automatically added to the distribution only
2023-05-09 13:33:11,860 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:33:11,860 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:33:11,860 ! 
2023-05-09 13:33:11,860 ! Please make sure that 'octoprint_octolapse.data.webcam_types.mjpg_streamer' is included as a package by using
2023-05-09 13:33:11,860 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:33:11,861 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:33:11,861 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:33:11,861 ! 
2023-05-09 13:33:11,861 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:33:11,861 ! documentation page.
2023-05-09 13:33:11,862 ! 
2023-05-09 13:33:11,862 ! 
2023-05-09 13:33:11,862 ! !!
2023-05-09 13:33:11,862 ! 
2023-05-09 13:33:11,862 ! check.warn(importable)
2023-05-09 13:33:11,863 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.css' as data is deprecated, please list it in `packages`.
2023-05-09 13:33:11,863 ! !!
2023-05-09 13:33:11,863 ! 
2023-05-09 13:33:11,863 ! 
2023-05-09 13:33:11,863 ! ############################
2023-05-09 13:33:11,864 ! # Package would be ignored #
2023-05-09 13:33:11,864 ! ############################
2023-05-09 13:33:11,864 ! Python recognizes 'octoprint_octolapse.static.css' as an importable package,
2023-05-09 13:33:11,864 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:33:11,864 ! 
2023-05-09 13:33:11,865 ! 'octoprint_octolapse.static.css' has been automatically added to the distribution only
2023-05-09 13:33:11,865 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:33:11,865 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:33:11,865 ! 
2023-05-09 13:33:11,865 ! Please make sure that 'octoprint_octolapse.static.css' is included as a package by using
2023-05-09 13:33:11,866 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:33:11,866 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:33:11,866 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:33:11,866 ! 
2023-05-09 13:33:11,866 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:33:11,867 ! documentation page.
2023-05-09 13:33:11,867 ! 
2023-05-09 13:33:11,867 ! 
2023-05-09 13:33:11,867 ! !!
2023-05-09 13:33:11,867 ! 
2023-05-09 13:33:11,867 ! check.warn(importable)
2023-05-09 13:33:11,868 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.docs.help' as data is deprecated, please list it in `packages`.
2023-05-09 13:33:11,868 ! !!
2023-05-09 13:33:11,868 ! 
2023-05-09 13:33:11,868 ! 
2023-05-09 13:33:11,868 ! ############################
2023-05-09 13:33:11,869 ! # Package would be ignored #
2023-05-09 13:33:11,869 ! ############################
2023-05-09 13:33:11,869 ! Python recognizes 'octoprint_octolapse.static.docs.help' as an importable package,
2023-05-09 13:33:11,869 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:33:11,869 ! 
2023-05-09 13:33:11,870 ! 'octoprint_octolapse.static.docs.help' has been automatically added to the distribution only
2023-05-09 13:33:11,870 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:33:11,870 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:33:11,870 ! 
2023-05-09 13:33:11,870 ! Please make sure that 'octoprint_octolapse.static.docs.help' is included as a package by using
2023-05-09 13:33:11,871 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:33:11,871 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:33:11,871 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:33:11,871 ! 
2023-05-09 13:33:11,871 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:33:11,872 ! documentation page.
2023-05-09 13:33:11,872 ! 
2023-05-09 13:33:11,872 ! 
2023-05-09 13:33:11,872 ! !!
2023-05-09 13:33:11,872 ! 
2023-05-09 13:33:11,873 ! check.warn(importable)
2023-05-09 13:33:11,873 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.img' as data is deprecated, please list it in `packages`.
2023-05-09 13:33:11,873 ! !!
2023-05-09 13:33:11,873 ! 
2023-05-09 13:33:11,873 ! 
2023-05-09 13:33:11,874 ! ############################
2023-05-09 13:33:11,874 ! # Package would be ignored #
2023-05-09 13:33:11,874 ! ############################
2023-05-09 13:33:11,874 ! Python recognizes 'octoprint_octolapse.static.img' as an importable package,
2023-05-09 13:33:11,874 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:33:11,874 ! 
2023-05-09 13:33:11,875 ! 'octoprint_octolapse.static.img' has been automatically added to the distribution only
2023-05-09 13:33:11,875 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:33:11,875 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:33:11,875 ! 
2023-05-09 13:33:11,875 ! Please make sure that 'octoprint_octolapse.static.img' is included as a package by using
2023-05-09 13:33:11,876 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:33:11,876 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:33:11,876 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:33:11,876 ! 
2023-05-09 13:33:11,876 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:33:11,877 ! documentation page.
2023-05-09 13:33:11,877 ! 
2023-05-09 13:33:11,877 ! 
2023-05-09 13:33:11,877 ! !!
2023-05-09 13:33:11,877 ! 
2023-05-09 13:33:11,878 ! check.warn(importable)
2023-05-09 13:33:11,878 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.js' as data is deprecated, please list it in `packages`.
2023-05-09 13:33:11,878 ! !!
2023-05-09 13:33:11,878 ! 
2023-05-09 13:33:11,878 ! 
2023-05-09 13:33:11,879 ! ############################
2023-05-09 13:33:11,879 ! # Package would be ignored #
2023-05-09 13:33:11,879 ! ############################
2023-05-09 13:33:11,879 ! Python recognizes 'octoprint_octolapse.static.js' as an importable package,
2023-05-09 13:33:11,879 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:33:11,879 ! 
2023-05-09 13:33:11,880 ! 'octoprint_octolapse.static.js' has been automatically added to the distribution only
2023-05-09 13:33:11,880 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:33:11,880 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:33:11,880 ! 
2023-05-09 13:33:11,881 ! Please make sure that 'octoprint_octolapse.static.js' is included as a package by using
2023-05-09 13:33:11,881 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:33:11,881 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:33:11,881 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:33:11,881 ! 
2023-05-09 13:33:11,881 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:33:11,882 ! documentation page.
2023-05-09 13:33:11,882 ! 
2023-05-09 13:33:11,882 ! 
2023-05-09 13:33:11,882 ! !!
2023-05-09 13:33:11,882 ! 
2023-05-09 13:33:11,883 ! check.warn(importable)
2023-05-09 13:33:11,883 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.js.webcams.mjpg_streamer' as data is deprecated, please list it in `packages`.
2023-05-09 13:33:11,883 ! !!
2023-05-09 13:33:11,883 ! 
2023-05-09 13:33:11,883 ! 
2023-05-09 13:33:11,884 ! ############################
2023-05-09 13:33:11,884 ! # Package would be ignored #
2023-05-09 13:33:11,884 ! ############################
2023-05-09 13:33:11,884 ! Python recognizes 'octoprint_octolapse.static.js.webcams.mjpg_streamer' as an importable package,
2023-05-09 13:33:11,884 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:33:11,885 ! 
2023-05-09 13:33:11,885 ! 'octoprint_octolapse.static.js.webcams.mjpg_streamer' has been automatically added to the distribution only
2023-05-09 13:33:11,885 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:33:11,885 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:33:11,885 ! 
2023-05-09 13:33:11,886 ! Please make sure that 'octoprint_octolapse.static.js.webcams.mjpg_streamer' is included as a package by using
2023-05-09 13:33:11,886 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:33:11,886 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:33:11,886 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:33:11,886 ! 
2023-05-09 13:33:11,887 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:33:11,887 ! documentation page.
2023-05-09 13:33:11,887 ! 
2023-05-09 13:33:11,887 ! 
2023-05-09 13:33:11,887 ! !!
2023-05-09 13:33:11,888 ! 
2023-05-09 13:33:11,888 ! check.warn(importable)
2023-05-09 13:33:11,888 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.templates' as data is deprecated, please list it in `packages`.
2023-05-09 13:33:11,888 ! !!
2023-05-09 13:33:11,888 ! 
2023-05-09 13:33:11,889 ! 
2023-05-09 13:33:11,889 ! ############################
2023-05-09 13:33:11,889 ! # Package would be ignored #
2023-05-09 13:33:11,889 ! ############################
2023-05-09 13:33:11,889 ! Python recognizes 'octoprint_octolapse.templates' as an importable package,
2023-05-09 13:33:11,890 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:33:11,890 ! 
2023-05-09 13:33:11,890 ! 'octoprint_octolapse.templates' has been automatically added to the distribution only
2023-05-09 13:33:11,890 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:33:11,890 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:33:11,890 ! 
2023-05-09 13:33:11,891 ! Please make sure that 'octoprint_octolapse.templates' is included as a package by using
2023-05-09 13:33:11,891 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:33:11,891 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:33:11,891 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:33:11,891 ! 
2023-05-09 13:33:11,892 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:33:11,892 ! documentation page.
2023-05-09 13:33:11,892 ! 
2023-05-09 13:33:11,892 ! 
2023-05-09 13:33:11,892 ! !!
2023-05-09 13:33:11,893 ! 
2023-05-09 13:33:11,893 ! check.warn(importable)
2023-05-09 13:33:11,893 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.templates.webcams.mjpg_streamer' as data is deprecated, please list it in `packages`.
2023-05-09 13:33:11,893 ! !!
2023-05-09 13:33:11,893 ! 
2023-05-09 13:33:11,894 ! 
2023-05-09 13:33:11,894 ! ############################
2023-05-09 13:33:11,894 ! # Package would be ignored #
2023-05-09 13:33:11,894 ! ############################
2023-05-09 13:33:11,894 ! Python recognizes 'octoprint_octolapse.templates.webcams.mjpg_streamer' as an importable package,
2023-05-09 13:33:11,895 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:33:11,895 ! 
2023-05-09 13:33:11,895 ! 'octoprint_octolapse.templates.webcams.mjpg_streamer' has been automatically added to the distribution only
2023-05-09 13:33:11,895 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:33:11,895 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:33:11,895 ! 
2023-05-09 13:33:11,896 ! Please make sure that 'octoprint_octolapse.templates.webcams.mjpg_streamer' is included as a package by using
2023-05-09 13:33:11,896 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:33:11,896 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:33:11,896 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:33:11,896 ! 
2023-05-09 13:33:11,897 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:33:11,897 ! documentation page.
2023-05-09 13:33:11,897 ! 
2023-05-09 13:33:11,897 ! 
2023-05-09 13:33:11,897 ! !!
2023-05-09 13:33:11,898 ! 
2023-05-09 13:33:11,898 ! check.warn(importable)
2023-05-09 13:33:11,898 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:33:11,898 ! copying octoprint_octolapse/data/settings_default_0.3.3rc3.dev0.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:33:11,898 ! copying octoprint_octolapse/data/settings_default_0.4.0.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:33:11,899 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev0.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:33:11,899 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev2.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:33:11,899 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev3.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:33:11,899 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev4.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:33:11,899 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev5.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:33:11,900 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:33:11,900 ! copying octoprint_octolapse/data/settings_default_0.4.0rc2.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:33:11,900 ! copying octoprint_octolapse/data/settings_default_0.4.0rc3.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:33:11,900 ! copying octoprint_octolapse/data/settings_default_current.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:33:11,900 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 13:33:11,901 ! copying octoprint_octolapse/data/Images/no-camera-selected.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 13:33:11,901 ! copying octoprint_octolapse/data/Images/no-image-available.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 13:33:11,901 ! copying octoprint_octolapse/data/Images/no_snapshot.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 13:33:11,901 ! copying octoprint_octolapse/data/Images/test-snapshot-image.jpg -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 13:33:11,901 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/fonts
2023-05-09 13:33:11,902 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/fonts/DejaVu
2023-05-09 13:33:11,902 ! copying octoprint_octolapse/data/fonts/DejaVu/DejaVuSansMono.ttf -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/fonts/DejaVu
2023-05-09 13:33:11,902 ! copying octoprint_octolapse/data/fonts/DejaVu/license.txt -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/fonts/DejaVu
2023-05-09 13:33:11,902 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib
2023-05-09 13:33:11,902 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:33:11,902 ! copying octoprint_octolapse/data/lib/c/extruder.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:33:11,903 ! copying octoprint_octolapse/data/lib/c/extruder.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:33:11,903 ! copying octoprint_octolapse/data/lib/c/gcode_comment_processor.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:33:11,903 ! copying octoprint_octolapse/data/lib/c/gcode_comment_processor.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:33:11,903 ! copying octoprint_octolapse/data/lib/c/gcode_parser.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:33:11,903 ! copying octoprint_octolapse/data/lib/c/gcode_parser.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:33:11,904 ! copying octoprint_octolapse/data/lib/c/gcode_position.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:33:11,904 ! copying octoprint_octolapse/data/lib/c/gcode_position.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:33:11,904 ! copying octoprint_octolapse/data/lib/c/gcode_position_processor.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:33:11,904 ! copying octoprint_octolapse/data/lib/c/gcode_position_processor.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:33:11,904 ! copying octoprint_octolapse/data/lib/c/logging.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:33:11,905 ! copying octoprint_octolapse/data/lib/c/logging.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:33:11,905 ! copying octoprint_octolapse/data/lib/c/parsed_command.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:33:11,905 ! copying octoprint_octolapse/data/lib/c/parsed_command.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:33:11,905 ! copying octoprint_octolapse/data/lib/c/parsed_command_parameter.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:33:11,905 ! copying octoprint_octolapse/data/lib/c/parsed_command_parameter.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:33:11,906 ! copying octoprint_octolapse/data/lib/c/position.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:33:11,906 ! copying octoprint_octolapse/data/lib/c/position.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:33:11,906 ! copying octoprint_octolapse/data/lib/c/python_helpers.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:33:11,906 ! copying octoprint_octolapse/data/lib/c/python_helpers.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:33:11,906 ! copying octoprint_octolapse/data/lib/c/snapshot_plan.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:33:11,906 ! copying octoprint_octolapse/data/lib/c/snapshot_plan.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:33:11,907 ! copying octoprint_octolapse/data/lib/c/snapshot_plan_step.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:33:11,907 ! copying octoprint_octolapse/data/lib/c/snapshot_plan_step.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:33:11,907 ! copying octoprint_octolapse/data/lib/c/stabilization.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:33:11,907 ! copying octoprint_octolapse/data/lib/c/stabilization.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:33:11,907 ! copying octoprint_octolapse/data/lib/c/stabilization_results.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:33:11,907 ! copying octoprint_octolapse/data/lib/c/stabilization_results.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:33:11,908 ! copying octoprint_octolapse/data/lib/c/stabilization_smart_gcode.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:33:11,908 ! copying octoprint_octolapse/data/lib/c/stabilization_smart_gcode.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:33:11,908 ! copying octoprint_octolapse/data/lib/c/stabilization_smart_layer.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:33:11,908 ! copying octoprint_octolapse/data/lib/c/stabilization_smart_layer.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:33:11,908 ! copying octoprint_octolapse/data/lib/c/stabilization_snap_to_print.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:33:11,908 ! copying octoprint_octolapse/data/lib/c/stabilization_snap_to_print.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:33:11,909 ! copying octoprint_octolapse/data/lib/c/trigger_position.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:33:11,909 ! copying octoprint_octolapse/data/lib/c/trigger_position.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:33:11,909 ! copying octoprint_octolapse/data/lib/c/utilities.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:33:11,909 ! copying octoprint_octolapse/data/lib/c/utilities.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:33:11,909 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts
2023-05-09 13:33:11,909 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode
2023-05-09 13:33:11,910 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:33:11,910 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:33:11,910 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_02_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:33:11,910 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_03_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:33:11,910 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_04_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:33:11,910 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_05_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:33:11,911 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_06_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:33:11,911 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_07_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:33:11,911 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_08_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:33:11,911 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:33:11,911 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:33:11,911 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_02_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:33:11,912 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_03_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:33:11,912 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_04_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:33:11,912 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_05_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:33:11,912 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_06_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:33:11,912 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_07_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:33:11,913 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_08_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:33:11,913 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:33:11,913 ! copying octoprint_octolapse/data/scripts/linux/capture_image_leave_on_camera.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:33:11,913 ! copying octoprint_octolapse/data/scripts/linux/download-from-camera-and-rename.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:33:11,913 ! copying octoprint_octolapse/data/scripts/linux/initialize_dslr.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:33:11,913 ! copying octoprint_octolapse/data/scripts/linux/move_snapshots_to_target.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:33:11,914 ! copying octoprint_octolapse/data/scripts/linux/take_snapshot_and_download.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:33:11,914 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/windows
2023-05-09 13:33:11,914 ! copying octoprint_octolapse/data/scripts/windows/take_snapshot_and_download.bat -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/windows
2023-05-09 13:33:11,914 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/templates
2023-05-09 13:33:11,914 ! copying octoprint_octolapse/data/templates/cura_gcode_settings_template.txt -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/templates
2023-05-09 13:33:11,914 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types
2023-05-09 13:33:11,915 ! copying octoprint_octolapse/data/webcam_types/camera_types.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types
2023-05-09 13:33:11,915 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:33:11,915 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/logitech_c250.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:33:11,915 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/logitech_c920.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:33:11,915 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/logitech_c920_2.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:33:11,915 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/logitech_c920_3.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:33:11,916 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/raspi_cam_v2.1.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:33:11,916 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/raspi_cam_v2.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:33:11,916 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static
2023-05-09 13:33:11,916 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/css
2023-05-09 13:33:11,916 ! copying octoprint_octolapse/static/css/jquery.minicolors.css -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/css
2023-05-09 13:33:11,917 ! copying octoprint_octolapse/static/css/jquery.minicolors.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/css
2023-05-09 13:33:11,917 ! copying octoprint_octolapse/static/css/octolapse.css -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/css
2023-05-09 13:33:11,917 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs
2023-05-09 13:33:11,917 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,917 ! copying octoprint_octolapse/static/docs/help/dialog.renderings.in_process.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,917 ! copying octoprint_octolapse/static/docs/help/dialog.renderings.unfinished.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,918 ! copying octoprint_octolapse/static/docs/help/dialog.timelapse_files.snapshot_archive.import.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,918 ! copying octoprint_octolapse/static/docs/help/dialog.timelapse_files.snapshot_archive.tab.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,918 ! copying octoprint_octolapse/static/docs/help/dialog.timelapse_files.timelapse.tab.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,918 ! copying octoprint_octolapse/static/docs/help/error_help_error_not_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,918 ! copying octoprint_octolapse/static/docs/help/error_help_init_automatic_slicer_no_settings_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,918 ! copying octoprint_octolapse/static/docs/help/error_help_init_automatic_slicer_settings_missing.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,919 ! copying octoprint_octolapse/static/docs/help/error_help_init_before_print_start_camera_script_apply_failed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,919 ! copying octoprint_octolapse/static/docs/help/error_help_init_camera_init_test_failed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,919 ! copying octoprint_octolapse/static/docs/help/error_help_init_camera_settings_apply_failed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,919 ! copying octoprint_octolapse/static/docs/help/error_help_init_cant_print_from_sd.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,919 ! copying octoprint_octolapse/static/docs/help/error_help_init_directory_test_failed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,919 ! copying octoprint_octolapse/static/docs/help/error_help_init_ffmpeg_not_found_at_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,920 ! copying octoprint_octolapse/static/docs/help/error_help_init_ffmpeg_path_not_set.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,920 ! copying octoprint_octolapse/static/docs/help/error_help_init_ffmpeg_path_retrieve_exception.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,920 ! copying octoprint_octolapse/static/docs/help/error_help_init_incorrect_octoprint_version.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,920 ! copying octoprint_octolapse/static/docs/help/error_help_init_incorrect_print_start_state.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,920 ! copying octoprint_octolapse/static/docs/help/error_help_init_m114_not_supported.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,921 ! copying octoprint_octolapse/static/docs/help/error_help_init_manual_slicer_settings_missing.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,921 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_current_job_data_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,921 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_current_job_file_data_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,921 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_enabled_cameras.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,921 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_gcode_filepath_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,921 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_printer_profile_exists.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,922 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_printer_profile_selected.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,922 ! copying octoprint_octolapse/static/docs/help/error_help_init_octolapse_is_disabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,922 ! copying octoprint_octolapse/static/docs/help/error_help_init_overlay_font_path_not_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,922 ! copying octoprint_octolapse/static/docs/help/error_help_init_printer_not_configured.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,922 ! copying octoprint_octolapse/static/docs/help/error_help_init_rendering_file_template_invalid.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,922 ! copying octoprint_octolapse/static/docs/help/error_help_init_timelapse_start_exception.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,923 ! copying octoprint_octolapse/static/docs/help/error_help_init_too_few_extruders_defined.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,923 ! copying octoprint_octolapse/static/docs/help/error_help_init_too_few_extruders_offsets_defined.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,923 ! copying octoprint_octolapse/static/docs/help/error_help_init_unable_to_accept_snapshot_plan.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,923 ! copying octoprint_octolapse/static/docs/help/error_help_init_unexpected_exception.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,923 ! copying octoprint_octolapse/static/docs/help/error_help_init_unknown_file_origin.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,923 ! copying octoprint_octolapse/static/docs/help/error_help_not_a_valid_error_dict.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,924 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_axis_mode_e_unknown.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,924 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_axis_mode_xyz_unknown.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,924 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_incorrect_trigger_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,924 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_no_definite_position.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,924 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_no_metric_units.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,925 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_no_snapshot_commands_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,925 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_no_snapshot_plans_returned.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,925 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_printer_not_primed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,925 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_unhandled_exception.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,925 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_unknown_trigger_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,925 ! copying octoprint_octolapse/static/docs/help/error_help_rendering_archive_import_no_files_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,926 ! copying octoprint_octolapse/static/docs/help/error_help_rendering_archive_import_zip_file_corrupt.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,926 ! copying octoprint_octolapse/static/docs/help/error_help_rendering_archive_import_zip_file_too_large.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,926 ! copying octoprint_octolapse/static/docs/help/error_help_settings_slicer_simplify3d_duplicate_toolhead_numbers.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,926 ! copying octoprint_octolapse/static/docs/help/error_help_settings_slicer_simplify3d_extruder_count_mismatch.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,926 ! copying octoprint_octolapse/static/docs/help/error_help_settings_slicer_simplify3d_max_extruder_count_exceeded.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,926 ! copying octoprint_octolapse/static/docs/help/error_help_settings_slicer_simplify3d_unexpected_max_toolhead_number.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,927 ! copying octoprint_octolapse/static/docs/help/error_help_timelapse_cannot_aquire_job_lock.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,927 ! copying octoprint_octolapse/static/docs/help/main_settings.auto_reload_frames.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,927 ! copying octoprint_octolapse/static/docs/help/main_settings.auto_reload_latest_snapshot.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,927 ! copying octoprint_octolapse/static/docs/help/main_settings.automatic_update_interval_days.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,927 ! copying octoprint_octolapse/static/docs/help/main_settings.automatic_updates_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,927 ! copying octoprint_octolapse/static/docs/help/main_settings.cancel_print_on_startup_error.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,928 ! copying octoprint_octolapse/static/docs/help/main_settings.enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,928 ! copying octoprint_octolapse/static/docs/help/main_settings.is_test_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,928 ! copying octoprint_octolapse/static/docs/help/main_settings.preview_snapshot_plan_autoclose.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,928 ! copying octoprint_octolapse/static/docs/help/main_settings.preview_snapshot_plan_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,928 ! copying octoprint_octolapse/static/docs/help/main_settings.preview_snapshot_plans.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,928 ! copying octoprint_octolapse/static/docs/help/main_settings.show_extruder_state_changes.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,929 ! copying octoprint_octolapse/static/docs/help/main_settings.show_navbar_icon.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,929 ! copying octoprint_octolapse/static/docs/help/main_settings.show_navbar_when_not_printing.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,929 ! copying octoprint_octolapse/static/docs/help/main_settings.show_position_changes.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,929 ! copying octoprint_octolapse/static/docs/help/main_settings.show_printer_state_changes.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,929 ! copying octoprint_octolapse/static/docs/help/main_settings.show_snapshot_plan_information.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,929 ! copying octoprint_octolapse/static/docs/help/main_settings.show_trigger_state_changes.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,930 ! copying octoprint_octolapse/static/docs/help/main_settings.snapshot_archive_directory.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,930 ! copying octoprint_octolapse/static/docs/help/main_settings.temporary_directory.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,930 ! copying octoprint_octolapse/static/docs/help/main_settings.timelapse_directory.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,930 ! copying octoprint_octolapse/static/docs/help/profiles.camera.apply_settings_at_startup.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,930 ! copying octoprint_octolapse/static/docs/help/profiles.camera.apply_settings_before_print.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,930 ! copying octoprint_octolapse/static/docs/help/profiles.camera.apply_settings_when_disabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,931 ! copying octoprint_octolapse/static/docs/help/profiles.camera.camera_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,931 ! copying octoprint_octolapse/static/docs/help/profiles.camera.delay.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,931 ! copying octoprint_octolapse/static/docs/help/profiles.camera.edit_cutsom_image_preferences.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,931 ! copying octoprint_octolapse/static/docs/help/profiles.camera.external_camera_snapshot_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,931 ! copying octoprint_octolapse/static/docs/help/profiles.camera.gcode_camera_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,931 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_after_render_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,932 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_after_snapshot_gcode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,932 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_after_snapshot_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,932 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_before_render_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,932 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_before_snapshot_gcode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,932 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_before_snapshot_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,933 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_print_end_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,933 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_print_start_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,933 ! copying octoprint_octolapse/static/docs/help/profiles.camera.snapshot_transpose.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,933 ! copying octoprint_octolapse/static/docs/help/profiles.camera.stream_template.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,933 ! copying octoprint_octolapse/static/docs/help/profiles.camera.timeout_ms.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,933 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.address.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,934 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.enable_custom_image_preferences.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,934 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.ignore_ssl_error.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,934 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.1.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,934 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029518.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,934 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029519.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,934 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029538.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,935 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029670.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,935 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029671.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,935 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029675.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,935 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094849.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,935 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094850.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,935 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094851.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,936 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094856.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,936 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094857.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,936 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094858.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,936 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094860.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,936 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094861.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,936 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094867.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,937 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094868.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,937 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094870.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,937 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094871.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,937 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094872.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,937 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094873.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,937 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094874.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,938 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10291459.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,938 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963776.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,938 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963777.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,938 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963778.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,938 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963788.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,938 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963790.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,939 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963791.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,939 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963795.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,939 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963796.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,939 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963797.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,939 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963800.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,939 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963802.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,940 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963803.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,940 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963804.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,940 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963807.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,940 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963810.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,940 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963818.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,941 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.password.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,941 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.snapshot_request_template.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,941 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.stream_download.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,941 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.username.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,941 ! copying octoprint_octolapse/static/docs/help/profiles.library.is_custom.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,941 ! copying octoprint_octolapse/static/docs/help/profiles.logging.enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,942 ! copying octoprint_octolapse/static/docs/help/profiles.logging.log_all_errors.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,942 ! copying octoprint_octolapse/static/docs/help/profiles.logging.log_to_console.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,942 ! copying octoprint_octolapse/static/docs/help/profiles.logging.logging_level.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,942 ! copying octoprint_octolapse/static/docs/help/profiles.logging.manage_log_files.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,942 ! copying octoprint_octolapse/static/docs/help/profiles.logging.modules_to_log.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,942 ! copying octoprint_octolapse/static/docs/help/profiles.printer.auto_detect_position.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,943 ! copying octoprint_octolapse/static/docs/help/profiles.printer.auto_position_detection_commands.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,943 ! copying octoprint_octolapse/static/docs/help/profiles.printer.automatic_configuration.is_automatic.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,943 ! copying octoprint_octolapse/static/docs/help/profiles.printer.automatic_configuration.make.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,943 ! copying octoprint_octolapse/static/docs/help/profiles.printer.automatic_configuration.model.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,943 ! copying octoprint_octolapse/static/docs/help/profiles.printer.bed_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,943 ! copying octoprint_octolapse/static/docs/help/profiles.printer.custom_bounding_box.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,944 ! copying octoprint_octolapse/static/docs/help/profiles.printer.default_extruder.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,944 ! copying octoprint_octolapse/static/docs/help/profiles.printer.default_firmware_retractions.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,944 ! copying octoprint_octolapse/static/docs/help/profiles.printer.default_firmware_retractions_zhop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,944 ! copying octoprint_octolapse/static/docs/help/profiles.printer.e_axis_default_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,944 ! copying octoprint_octolapse/static/docs/help/profiles.printer.extruder_offsets.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,945 ! copying octoprint_octolapse/static/docs/help/profiles.printer.g90_influences_extruder.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,945 ! copying octoprint_octolapse/static/docs/help/profiles.printer.gocde_axis_compatibility_mode_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,945 ! copying octoprint_octolapse/static/docs/help/profiles.printer.home_axis_gcode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,945 ! copying octoprint_octolapse/static/docs/help/profiles.printer.invert_e.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,945 ! copying octoprint_octolapse/static/docs/help/profiles.printer.invert_x.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,945 ! copying octoprint_octolapse/static/docs/help/profiles.printer.invert_y.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,946 ! copying octoprint_octolapse/static/docs/help/profiles.printer.invert_z.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,946 ! copying octoprint_octolapse/static/docs/help/profiles.printer.minimum_layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,946 ! copying octoprint_octolapse/static/docs/help/profiles.printer.num_extruders.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,946 ! copying octoprint_octolapse/static/docs/help/profiles.printer.origin_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,946 ! copying octoprint_octolapse/static/docs/help/profiles.printer.override_octoprint_profile_settings.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,946 ! copying octoprint_octolapse/static/docs/help/profiles.printer.priming_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,947 ! copying octoprint_octolapse/static/docs/help/profiles.printer.restrict_snapshot_area.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,947 ! copying octoprint_octolapse/static/docs/help/profiles.printer.shared_extruder.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,947 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicer_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,947 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.automatic.continue_on_failure.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,947 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.automatic.disable_automatic_save.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,947 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.4_2.speed_z_hop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,948 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,948 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.max_feedrate_z_override.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,948 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_amount.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,948 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_enable.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,948 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_hop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,948 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_hop_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,949 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_prime_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,949 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_retract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,949 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.smooth_spiralized_contours.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,949 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.speed_travel.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,949 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.axis_speed_display_unit_options.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,950 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.deretract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,950 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,950 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.retract_before_move.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,950 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.retract_length.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,950 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.retract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,950 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.travel_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,951 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.vase_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,951 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.z_hop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,951 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.z_travel_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,951 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.extruder_use_retract.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,951 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,951 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.retraction_distance.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,952 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.retraction_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,952 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.retraction_vertical_lift.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,952 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.vase_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,952 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.x_y_axis_movement_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,952 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.z_axis_movement_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,952 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.deretract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,953 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,953 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.retract_length.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,953 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.retract_lift.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,953 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.retract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,953 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.travel_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,954 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.vase_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,954 ! copying octoprint_octolapse/static/docs/help/profiles.printer.snapshot_command.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,954 ! copying octoprint_octolapse/static/docs/help/profiles.printer.suppress_snapshot_command_always.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,954 ! copying octoprint_octolapse/static/docs/help/profiles.printer.units_default.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,954 ! copying octoprint_octolapse/static/docs/help/profiles.printer.xyz_axes_default_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,954 ! copying octoprint_octolapse/static/docs/help/profiles.printer.zero_based_extruder.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,955 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.archive_snapshots.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,955 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.bitrate.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,955 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.constant_rate_factor.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,955 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.enable_watermark.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,955 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,955 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.fps.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,956 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.fps_calculation_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,956 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.max_fps.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,956 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.min_fps.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,956 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.output_format.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,956 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.output_template.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,957 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_font_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,957 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_font_size.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,957 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_outline_color.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,957 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_outline_width.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,957 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_preview.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,957 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_alignment.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,958 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_color.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,958 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_halign.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,958 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_pos_xy.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,958 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_template.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,958 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_template_current_time.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,958 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_template_time_elapsed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,959 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_valign.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,959 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.post_roll_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,959 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.pre_roll_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,959 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.run_length_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,959 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.thread_count.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,959 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.wait_for_moves_to_finish.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,960 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_fixed_coordinate.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,960 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_fixed_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,960 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_fixed_path_invert_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,960 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_fixed_path_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,960 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_relative.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,961 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_relative_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,961 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_relative_path_invert_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,961 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_relative_path_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,961 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,961 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_fixed_coordinate.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,961 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_fixed_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,962 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_fixed_path_invert_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,962 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_fixed_path_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,962 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_relative.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,962 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_relative_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,962 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_relative_path_invert_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,962 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_relative_path_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,963 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,963 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.calculate_intersections.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,963 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.extruder_state_requirements_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,963 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.layer_trigger_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,963 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.position_restriction_shape.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,963 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.position_restriction_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,964 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.position_restrictions_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,964 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.require_zhop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,964 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.smart_layer_disable_z_lift.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,964 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.smart_layer_snap_to_print_high_quality.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,964 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.smart_layer_snap_to_print_smooth.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,964 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.smart_layer_trigger_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,965 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.timer_trigger_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,965 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.trigger_subtype.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,965 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.trigger_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,965 ! copying octoprint_octolapse/static/docs/help/quality_issues_fast_trigger.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,965 ! copying octoprint_octolapse/static/docs/help/quality_issues_low_quality_snap_to_print.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,965 ! copying octoprint_octolapse/static/docs/help/quality_issues_no_print_features_detected.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,966 ! copying octoprint_octolapse/static/docs/help/settings.import.import_method.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,966 ! copying octoprint_octolapse/static/docs/help/settings.import.import_text.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,966 ! copying octoprint_octolapse/static/docs/help/snapshot_plan_missed_snapshots.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:33:11,966 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/img
2023-05-09 13:33:11,966 ! copying octoprint_octolapse/static/img/watermark.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/img
2023-05-09 13:33:11,966 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:33:11,967 ! copying octoprint_octolapse/static/js/jquery.minicolors.min.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:33:11,967 ! copying octoprint_octolapse/static/js/jquery.validate.min.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:33:11,967 ! copying octoprint_octolapse/static/js/octolapse.dialog.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:33:11,967 ! copying octoprint_octolapse/static/js/octolapse.dialog.renderings.in_process.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:33:11,967 ! copying octoprint_octolapse/static/js/octolapse.dialog.renderings.unfinished.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:33:11,967 ! copying octoprint_octolapse/static/js/octolapse.dialog.timelapse_files.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:33:11,968 ! copying octoprint_octolapse/static/js/octolapse.file_browser.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:33:11,968 ! copying octoprint_octolapse/static/js/octolapse.help.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:33:11,968 ! copying octoprint_octolapse/static/js/octolapse.helpers.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:33:11,968 ! copying octoprint_octolapse/static/js/octolapse.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:33:11,968 ! copying octoprint_octolapse/static/js/octolapse.profiles.camera.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:33:11,969 ! copying octoprint_octolapse/static/js/octolapse.profiles.camera.webcam.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:33:11,969 ! copying octoprint_octolapse/static/js/octolapse.profiles.camera.webcam.mjpg_streamer.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:33:11,969 ! copying octoprint_octolapse/static/js/octolapse.profiles.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:33:11,969 ! copying octoprint_octolapse/static/js/octolapse.profiles.library.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:33:11,969 ! copying octoprint_octolapse/static/js/octolapse.profiles.logging.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:33:11,969 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:33:11,970 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.slicer.cura.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:33:11,970 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.slicer.other.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:33:11,970 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.slicer.simplify_3d.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:33:11,970 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.slicer.slic3r_pe.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:33:11,970 ! copying octoprint_octolapse/static/js/octolapse.profiles.rendering.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:33:11,970 ! copying octoprint_octolapse/static/js/octolapse.profiles.stabilization.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:33:11,971 ! copying octoprint_octolapse/static/js/octolapse.profiles.trigger.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:33:11,971 ! copying octoprint_octolapse/static/js/octolapse.settings.import.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:33:11,971 ! copying octoprint_octolapse/static/js/octolapse.settings.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:33:11,971 ! copying octoprint_octolapse/static/js/octolapse.settings.main.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:33:11,971 ! copying octoprint_octolapse/static/js/octolapse.status.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:33:11,971 ! copying octoprint_octolapse/static/js/octolapse.status.snapshotplan.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:33:11,972 ! copying octoprint_octolapse/static/js/octolapse.status.snapshotplan_preview.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:33:11,972 ! copying octoprint_octolapse/static/js/showdown.min.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:33:11,972 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js/webcams
2023-05-09 13:33:11,972 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js/webcams/mjpg_streamer
2023-05-09 13:33:11,972 ! copying octoprint_octolapse/static/js/webcams/mjpg_streamer/raspi_cam_v2.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js/webcams/mjpg_streamer
2023-05-09 13:33:11,972 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:33:11,973 ! copying octoprint_octolapse/templates/octolapse_dialog.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:33:11,973 ! copying octoprint_octolapse/templates/octolapse_dialog_rendering_in_process.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:33:11,973 ! copying octoprint_octolapse/templates/octolapse_dialog_rendering_unfinished.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:33:11,973 ! copying octoprint_octolapse/templates/octolapse_dialog_timelapse_files.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:33:11,973 ! copying octoprint_octolapse/templates/octolapse_file_browser.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:33:11,974 ! copying octoprint_octolapse/templates/octolapse_helpers.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:33:11,974 ! copying octoprint_octolapse/templates/octolapse_navbar.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:33:11,974 ! copying octoprint_octolapse/templates/octolapse_profile_dialog_add_edit.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:33:11,974 ! copying octoprint_octolapse/templates/octolapse_profiles.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:33:11,974 ! copying octoprint_octolapse/templates/octolapse_profiles_camera.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:33:11,974 ! copying octoprint_octolapse/templates/octolapse_profiles_camera_webcam.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:33:11,975 ! copying octoprint_octolapse/templates/octolapse_profiles_camera_webcam_mjpg_streamer.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:33:11,975 ! copying octoprint_octolapse/templates/octolapse_profiles_library.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:33:11,975 ! copying octoprint_octolapse/templates/octolapse_profiles_logging.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:33:11,975 ! copying octoprint_octolapse/templates/octolapse_profiles_printer.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:33:11,975 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_automatic.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:33:11,975 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_automatic.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:33:11,976 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_cura.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:33:11,976 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_cura_4.2.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:33:11,976 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_other.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:33:11,976 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_simplify3d.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:33:11,976 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_slic3r_pe.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:33:11,976 ! copying octoprint_octolapse/templates/octolapse_profiles_rendering.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:33:11,977 ! copying octoprint_octolapse/templates/octolapse_profiles_stabilization.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:33:11,977 ! copying octoprint_octolapse/templates/octolapse_profiles_trigger.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:33:11,977 ! copying octoprint_octolapse/templates/octolapse_settings.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:33:11,977 ! copying octoprint_octolapse/templates/octolapse_settings_import.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:33:11,977 ! copying octoprint_octolapse/templates/octolapse_settings_main.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:33:11,977 ! copying octoprint_octolapse/templates/octolapse_snapshot_plan.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:33:11,978 ! copying octoprint_octolapse/templates/octolapse_status_extruder.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:33:11,978 ! copying octoprint_octolapse/templates/octolapse_status_position.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:33:11,978 ! copying octoprint_octolapse/templates/octolapse_status_printer_state.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:33:11,978 ! copying octoprint_octolapse/templates/octolapse_status_snapshot_plan.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:33:11,978 ! copying octoprint_octolapse/templates/octolapse_status_triggers.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:33:11,978 ! copying octoprint_octolapse/templates/octolapse_tab.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:33:11,979 ! copying octoprint_octolapse/templates/octolapse_tab_latest_snapshot.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:33:11,979 ! copying octoprint_octolapse/templates/octolapse_tab_settings_current.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:33:11,979 ! copying octoprint_octolapse/templates/octolapse_tab_settings_current_cameras.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:33:11,979 ! copying octoprint_octolapse/templates/octolapse_tab_snapshot_plan_preview_popup.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:33:11,979 ! copying octoprint_octolapse/templates/octolapse_tab_webcam_settings_popup.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:33:11,979 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams
2023-05-09 13:33:11,980 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams/mjpg_streamer
2023-05-09 13:33:11,980 ! copying octoprint_octolapse/templates/webcams/mjpg_streamer/logitech_c250.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams/mjpg_streamer
2023-05-09 13:33:11,980 ! copying octoprint_octolapse/templates/webcams/mjpg_streamer/logitech_c920.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams/mjpg_streamer
2023-05-09 13:33:11,980 ! copying octoprint_octolapse/templates/webcams/mjpg_streamer/raspi_cam_v2.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams/mjpg_streamer
2023-05-09 13:33:11,980 ! UPDATING build/lib.linux-aarch64-cpython-310/octoprint_octolapse/_version.py
2023-05-09 13:33:11,981 ! set build/lib.linux-aarch64-cpython-310/octoprint_octolapse/_version.py to 'v0.4.2'
2023-05-09 13:33:11,981 ! running build_ext
2023-05-09 13:33:11,981 ! Compiling Octolapse Parser Extension with <distutils.unixccompiler.UnixCCompiler object at 0x70c01ff9d0>.
2023-05-09 13:33:11,981 ! building 'GcodePositionProcessor' extension
2023-05-09 13:33:11,981 ! creating build/temp.linux-aarch64-cpython-310
2023-05-09 13:33:11,981 ! creating build/temp.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:33:11,982 ! creating build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:33:11,982 ! creating build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib
2023-05-09 13:33:11,982 ! creating build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:33:11,982 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/extruder.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/extruder.o -O3 -std=c++11
2023-05-09 13:33:11,982 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/gcode_comment_processor.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/gcode_comment_processor.o -O3 -std=c++11
2023-05-09 13:33:11,982 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.cpp: In member function 'void gcode_comment_processor::update_feature_from_section(position&) const':
2023-05-09 13:33:11,983 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.cpp:99:16: warning: enumeration value 'section_type_no_section' not handled in switch [-Wswitch]
2023-05-09 13:33:11,983 ! 99 |         switch (current_section_)
2023-05-09 13:33:11,983 ! |                ^
2023-05-09 13:33:11,983 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/gcode_parser.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/gcode_parser.o -O3 -std=c++11
2023-05-09 13:33:11,983 ! octoprint_octolapse/data/lib/c/gcode_parser.cpp: In member function 'bool gcode_parser::try_parse_gcode(const char*, parsed_command&)':
2023-05-09 13:33:11,983 ! octoprint_octolapse/data/lib/c/gcode_parser.cpp:148:47: warning: suggest parentheses around '&&' within '||' [-Wparentheses]
2023-05-09 13:33:11,984 ! 148 |     else if (cur_char > 32 || cur_char == ' ' && has_seen_character)
2023-05-09 13:33:11,984 ! |                               ~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:33:11,984 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/gcode_position.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/gcode_position.o -O3 -std=c++11
2023-05-09 13:33:11,984 ! octoprint_octolapse/data/lib/c/gcode_position.cpp: In member function 'void gcode_position::add_position(position&)':
2023-05-09 13:33:11,984 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:395:12: warning: operation on '((gcode_position*)this)->gcode_position::cur_pos_' may be undefined [-Wsequence-point]
2023-05-09 13:33:11,984 ! 395 |   cur_pos_ = (++cur_pos_) % NUM_POSITIONS;
2023-05-09 13:33:11,985 ! octoprint_octolapse/data/lib/c/gcode_position.cpp: In member function 'void gcode_position::add_position(parsed_command&)':
2023-05-09 13:33:11,985 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:402:12: warning: operation on '((gcode_position*)this)->gcode_position::cur_pos_' may be undefined [-Wsequence-point]
2023-05-09 13:33:11,985 ! 402 |   cur_pos_ = (++cur_pos_) % NUM_POSITIONS;
2023-05-09 13:33:11,985 ! octoprint_octolapse/data/lib/c/gcode_position.cpp: In member function 'void gcode_position::update(parsed_command&, long int, long int, long int)':
2023-05-09 13:33:11,985 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:659:31: warning: comparison of integer expressions of different signedness: 'const unsigned int' and 'int' [-Wsign-compare]
2023-05-09 13:33:11,985 ! 659 |                 if (increment > p_current_pos->height_increment && increment > 1)
2023-05-09 13:33:11,986 ! |                     ~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:33:11,986 ! octoprint_octolapse/data/lib/c/gcode_position.cpp: In member function 'void gcode_position::process_g10(position*, parsed_command&)':
2023-05-09 13:33:11,986 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:952:10: warning: variable 's' set but not used [-Wunused-but-set-variable]
2023-05-09 13:33:11,986 ! 952 |   double s = 0;
2023-05-09 13:33:11,986 ! |          ^
2023-05-09 13:33:11,986 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:953:8: warning: variable 'has_s' set but not used [-Wunused-but-set-variable]
2023-05-09 13:33:11,987 ! 953 |   bool has_s = false;
2023-05-09 13:33:11,987 ! |        ^~~~~
2023-05-09 13:33:11,987 ! In file included from octoprint_octolapse/data/lib/c/gcode_position.h:29,
2023-05-09 13:33:11,987 ! from octoprint_octolapse/data/lib/c/gcode_position.cpp:22:
2023-05-09 13:33:11,987 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h: At global scope:
2023-05-09 13:33:11,987 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:77:20: warning: 'SLICER_PE_SKIRT_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:33:11,987 ! 77 | static const char* SLICER_PE_SKIRT_COMMENTS[] = {"skirt", "move to first skirt point", NULL};
2023-05-09 13:33:11,988 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:33:11,988 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:73:20: warning: 'SLICER_PE_BRIDGE_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:33:11,988 ! 73 | static const char* SLICER_PE_BRIDGE_COMMENTS[] = {
2023-05-09 13:33:11,988 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:33:11,988 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:72:20: warning: 'SLICER_PE_GAP_FILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:33:11,988 ! 72 | static const char* SLICER_PE_GAP_FILL_COMMENTS[] = {"gap fill", "move to first gap fill point", NULL};
2023-05-09 13:33:11,989 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:33:11,989 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:69:20: warning: 'SLICER_PE_SOLID_INFILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:33:11,989 ! 69 | static const char* SLICER_PE_SOLID_INFILL_COMMENTS[] = {
2023-05-09 13:33:11,989 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:33:11,989 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:68:20: warning: 'SLICER_PE_INFILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:33:11,989 ! 68 | static const char* SLICER_PE_INFILL_COMMENTS[] = {"infill", "move to first infill point", NULL};
2023-05-09 13:33:11,989 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:33:11,990 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:67:20: warning: 'SLICER_PE_UNKNOWN_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:33:11,990 ! 67 | static const char* SLICER_PE_UNKNOWN_PERIMETER_COMMENTS[] = {"perimeter", "move to first perimeter point", NULL};
2023-05-09 13:33:11,990 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:33:11,990 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:64:20: warning: 'SLICER_PE_INNER_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:33:11,990 ! 64 | static const char* SLICER_PE_INNER_PERIMETER_COMMENTS[] = {
2023-05-09 13:33:11,990 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:33:11,990 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:61:20: warning: 'SLICER_PE_OUTER_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:33:11,991 ! 61 | static const char* SLICER_PE_OUTER_PERIMETER_COMMENTS[] = {
2023-05-09 13:33:11,991 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:33:11,991 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/gcode_position_processor.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/gcode_position_processor.o -O3 -std=c++11
2023-05-09 13:33:11,991 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:915: warning: ignoring '#pragma region location_detection_commands' [-Wunknown-pragmas]
2023-05-09 13:33:11,991 ! 915 | #pragma region location_detection_commands
2023-05-09 13:33:11,991 ! |
2023-05-09 13:33:11,992 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:955: warning: ignoring '#pragma endregion Parse' [-Wunknown-pragmas]
2023-05-09 13:33:11,992 ! 955 | #pragma endregion Parse the list of location detection commands
2023-05-09 13:33:11,992 ! |
2023-05-09 13:33:11,992 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1122: warning: ignoring '#pragma region Extract' [-Wunknown-pragmas]
2023-05-09 13:33:11,992 ! 1122 | #pragma region Extract extruder objects
2023-05-09 13:33:11,992 ! |
2023-05-09 13:33:11,992 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1219: warning: ignoring '#pragma endregion Parse' [-Wunknown-pragmas]
2023-05-09 13:33:11,993 ! 1219 | #pragma endregion Parse extruder objects
2023-05-09 13:33:11,993 ! |
2023-05-09 13:33:11,993 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1221: warning: ignoring '#pragma region Extract' [-Wunknown-pragmas]
2023-05-09 13:33:11,993 ! 1221 | #pragma region Extract firmware extruder offsets from the printer settings
2023-05-09 13:33:11,993 ! |
2023-05-09 13:33:11,993 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1334: warning: ignoring '#pragma endregion Extract' [-Wunknown-pragmas]
2023-05-09 13:33:11,994 ! 1334 | #pragma endregion Extract firmware extruder offsets from the printer settings
2023-05-09 13:33:11,994 ! |
2023-05-09 13:33:11,994 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp: In function 'int main(int, char**)':
2023-05-09 13:33:11,994 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:56:27: warning: 'void PyEval_InitThreads()' is deprecated [-Wdeprecated-declarations]
2023-05-09 13:33:11,994 ! 56 |         PyEval_InitThreads();
2023-05-09 13:33:11,994 ! |         ~~~~~~~~~~~~~~~~~~^~
2023-05-09 13:33:11,994 ! In file included from /usr/include/python3.10/Python.h:130,
2023-05-09 13:33:11,995 ! from octoprint_octolapse/data/lib/c/gcode_position_processor.h:30,
2023-05-09 13:33:11,995 ! from octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:23:
2023-05-09 13:33:11,995 ! /usr/include/python3.10/ceval.h:122:37: note: declared here
2023-05-09 13:33:11,995 ! 122 | Py_DEPRECATED(3.9) PyAPI_FUNC(void) PyEval_InitThreads(void);
2023-05-09 13:33:11,995 ! |                                     ^~~~~~~~~~~~~~~~~~
2023-05-09 13:33:11,995 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp: In function 'PyObject* Initialize(PyObject*, PyObject*)':
2023-05-09 13:33:11,995 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:371:19: warning: unused variable 'p_gcode_position' [-Wunused-variable]
2023-05-09 13:33:11,996 ! 371 |   gcode_position* p_gcode_position = NULL;
2023-05-09 13:33:11,996 ! |                   ^~~~~~~~~~~~~~~~
2023-05-09 13:33:11,996 ! In file included from /usr/include/c++/12.2.1/bits/cxxabi_init_exception.h:38,
2023-05-09 13:33:11,996 ! from /usr/include/c++/12.2.1/bits/exception_ptr.h:38,
2023-05-09 13:33:11,996 ! from /usr/include/c++/12.2.1/exception:168,
2023-05-09 13:33:11,996 ! from /usr/include/c++/12.2.1/stdexcept:38,
2023-05-09 13:33:11,997 ! from /usr/include/c++/12.2.1/system_error:41,
2023-05-09 13:33:11,997 ! from /usr/include/c++/12.2.1/bits/ios_base.h:46,
2023-05-09 13:33:11,997 ! from /usr/include/c++/12.2.1/iomanip:40,
2023-05-09 13:33:11,997 ! from octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:24:
2023-05-09 13:33:11,997 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp: In function 'bool ParseStabilizationArgs(PyObject*, stabilization_args*, PyObject**, PyObject**)':
2023-05-09 13:33:11,997 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1406:12: error: converting to 'bool' from 'std::nullptr_t' requires direct-initialization [-fpermissive]
2023-05-09 13:33:11,997 ! 1406 |     return NULL;
2023-05-09 13:33:11,998 ! |            ^~~~
2023-05-09 13:33:11,998 ! In file included from octoprint_octolapse/data/lib/c/gcode_position_processor.h:37:
2023-05-09 13:33:11,998 ! octoprint_octolapse/data/lib/c/stabilization_smart_gcode.h: At global scope:
2023-05-09 13:33:11,998 ! octoprint_octolapse/data/lib/c/stabilization_smart_gcode.h:5:20: warning: 'SMART_GCODE_STABILIZATION' defined but not used [-Wunused-variable]
2023-05-09 13:33:11,998 ! 5 | static const char* SMART_GCODE_STABILIZATION = "smart_gcode";
2023-05-09 13:33:11,998 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:33:11,999 ! In file included from octoprint_octolapse/data/lib/c/gcode_position_processor.h:36:
2023-05-09 13:33:11,999 ! octoprint_octolapse/data/lib/c/stabilization_smart_layer.h:11:20: warning: 'SMART_LAYER_STABILIZATION' defined but not used [-Wunused-variable]
2023-05-09 13:33:11,999 ! 11 | static const char* SMART_LAYER_STABILIZATION = "smart_layer";
2023-05-09 13:33:11,999 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:33:11,999 ! In file included from octoprint_octolapse/data/lib/c/gcode_position_processor.h:35:
2023-05-09 13:33:11,999 ! octoprint_octolapse/data/lib/c/stabilization.h:44:20: warning: 'send_parsed_command_never' defined but not used [-Wunused-variable]
2023-05-09 13:33:11,999 ! 44 | static const char* send_parsed_command_never = "never";
2023-05-09 13:33:12,000 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:33:12,000 ! octoprint_octolapse/data/lib/c/stabilization.h:43:20: warning: 'send_parsed_command_last' defined but not used [-Wunused-variable]
2023-05-09 13:33:12,000 ! 43 | static const char* send_parsed_command_last = "last";
2023-05-09 13:33:12,000 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:33:12,000 ! octoprint_octolapse/data/lib/c/stabilization.h:42:20: warning: 'send_parsed_command_first' defined but not used [-Wunused-variable]
2023-05-09 13:33:12,000 ! 42 | static const char* send_parsed_command_first = "first";
2023-05-09 13:33:12,000 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:33:12,001 ! octoprint_octolapse/data/lib/c/stabilization.h:41:20: warning: 'snapshot_action' defined but not used [-Wunused-variable]
2023-05-09 13:33:12,001 ! 41 | static const char* snapshot_action = "snapshot";
2023-05-09 13:33:12,003 ! |                    ^~~~~~~~~~~~~~~
2023-05-09 13:33:12,003 ! octoprint_octolapse/data/lib/c/stabilization.h:40:20: warning: 'travel_action' defined but not used [-Wunused-variable]
2023-05-09 13:33:12,004 ! 40 | static const char* travel_action = "travel";
2023-05-09 13:33:12,004 ! |                    ^~~~~~~~~~~~~
2023-05-09 13:33:12,004 ! In file included from octoprint_octolapse/data/lib/c/gcode_position.h:29,
2023-05-09 13:33:12,004 ! from octoprint_octolapse/data/lib/c/gcode_position_processor.h:33:
2023-05-09 13:33:12,004 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:77:20: warning: 'SLICER_PE_SKIRT_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:33:12,004 ! 77 | static const char* SLICER_PE_SKIRT_COMMENTS[] = {"skirt", "move to first skirt point", NULL};
2023-05-09 13:33:12,005 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:33:12,005 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:73:20: warning: 'SLICER_PE_BRIDGE_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:33:12,005 ! 73 | static const char* SLICER_PE_BRIDGE_COMMENTS[] = {
2023-05-09 13:33:12,005 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:33:12,005 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:72:20: warning: 'SLICER_PE_GAP_FILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:33:12,005 ! 72 | static const char* SLICER_PE_GAP_FILL_COMMENTS[] = {"gap fill", "move to first gap fill point", NULL};
2023-05-09 13:33:12,006 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:33:12,006 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:69:20: warning: 'SLICER_PE_SOLID_INFILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:33:12,006 ! 69 | static const char* SLICER_PE_SOLID_INFILL_COMMENTS[] = {
2023-05-09 13:33:12,006 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:33:12,006 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:68:20: warning: 'SLICER_PE_INFILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:33:12,006 ! 68 | static const char* SLICER_PE_INFILL_COMMENTS[] = {"infill", "move to first infill point", NULL};
2023-05-09 13:33:12,006 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:33:12,007 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:67:20: warning: 'SLICER_PE_UNKNOWN_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:33:12,007 ! 67 | static const char* SLICER_PE_UNKNOWN_PERIMETER_COMMENTS[] = {"perimeter", "move to first perimeter point", NULL};
2023-05-09 13:33:12,007 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:33:12,007 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:64:20: warning: 'SLICER_PE_INNER_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:33:12,007 ! 64 | static const char* SLICER_PE_INNER_PERIMETER_COMMENTS[] = {
2023-05-09 13:33:12,007 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:33:12,007 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:61:20: warning: 'SLICER_PE_OUTER_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:33:12,008 ! 61 | static const char* SLICER_PE_OUTER_PERIMETER_COMMENTS[] = {
2023-05-09 13:33:12,008 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:33:12,008 ! error: command '/usr/bin/gcc' failed with exit code 1
2023-05-09 13:33:12,008 ! [end of output]
2023-05-09 13:33:12,008 ! 
2023-05-09 13:33:12,008 ! note: This error originates from a subprocess, and is likely not a problem with pip.
2023-05-09 13:33:12,009 ! error: legacy-install-failure
2023-05-09 13:33:12,009 ! 
2023-05-09 13:33:12,009 ! × Encountered error while trying to install package.
2023-05-09 13:33:12,009 ! ╰─> Octolapse
2023-05-09 13:33:12,009 ! 
2023-05-09 13:33:12,009 ! note: This is an issue with the package mentioned above, not pip.
2023-05-09 13:33:12,009 ! hint: See above for output from the failure.
2023-05-09 13:37:12,739   /usr/bin/python3 -m pip --disable-pip-version-check install file:///tmp/tmpvn209wa3/Octolapse-master.zip --no-cache-dir
2023-05-09 13:37:20,795 > Processing /tmp/tmpvn209wa3/Octolapse-master.zip
2023-05-09 13:37:23,279 > Preparing metadata (setup.py): started
2023-05-09 13:37:40,782 > Preparing metadata (setup.py): finished with status 'done'
2023-05-09 13:37:40,783 > Requirement already satisfied: pillow>=6.2.0<7.0.0 in /usr/lib/python3.10/site-packages (from Octolapse==0.4.2) (9.3.0)
2023-05-09 13:37:40,783 > Requirement already satisfied: sarge in /usr/lib/python3.10/site-packages (from Octolapse==0.4.2) (0.1.6)
2023-05-09 13:37:40,784 > Requirement already satisfied: six in /usr/lib/python3.10/site-packages (from Octolapse==0.4.2) (1.16.0)
2023-05-09 13:37:40,785 > Requirement already satisfied: OctoPrint>1.3.8 in /usr/lib/python3.10/site-packages (from Octolapse==0.4.2) (1.8.7)
2023-05-09 13:37:40,786 > Requirement already satisfied: psutil in /usr/lib/python3.10/site-packages (from Octolapse==0.4.2) (5.9.4)
2023-05-09 13:37:40,790 > Requirement already satisfied: file_read_backwards in /usr/lib/python3.10/site-packages (from Octolapse==0.4.2) (3.0.0)
2023-05-09 13:37:40,791 > Requirement already satisfied: setuptools>=6.0 in /usr/lib/python3.10/site-packages (from Octolapse==0.4.2) (65.6.0)
2023-05-09 13:37:40,792 > Requirement already satisfied: awesome-slugify<1.7,>=1.6.5 in /usr/lib/python3.10/site-packages (from Octolapse==0.4.2) (1.6.5)
2023-05-09 13:37:40,794 > Requirement already satisfied: regex in /usr/lib/python3.10/site-packages (from awesome-slugify<1.7,>=1.6.5->Octolapse==0.4.2) (2022.10.31)
2023-05-09 13:37:40,796 > Requirement already satisfied: Unidecode<0.05,>=0.04.14 in /usr/lib/python3.10/site-packages (from awesome-slugify<1.7,>=1.6.5->Octolapse==0.4.2) (0.4.21)
2023-05-09 13:37:40,797 > Requirement already satisfied: OctoPrint-FileCheck>=2021.2.23 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2021.2.23)
2023-05-09 13:37:40,802 > Requirement already satisfied: OctoPrint-FirmwareCheck>=2021.10.11 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2021.10.11)
2023-05-09 13:37:40,803 > Requirement already satisfied: OctoPrint-PiSupport>=2022.6.13 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2022.6.13)
2023-05-09 13:37:40,804 > Requirement already satisfied: argon2_cffi<22,>=21.3.0 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (21.3.0)
2023-05-09 13:37:40,806 > Requirement already satisfied: cachelib<0.3,>=0.2 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (0.2.0)
2023-05-09 13:37:40,807 > Requirement already satisfied: Click<9,>=8.0.3 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (8.1.3)
2023-05-09 13:37:40,808 > Requirement already satisfied: colorlog<7,>=6 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (6.7.0)
2023-05-09 13:37:40,809 > Requirement already satisfied: emoji<2,>=1.4.2 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.7.0)
2023-05-09 13:37:40,810 > Requirement already satisfied: feedparser<7,>=6.0.8 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (6.0.10)
2023-05-09 13:37:40,811 > Requirement already satisfied: filetype<2,>=1.0.7 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.2.0)
2023-05-09 13:37:40,812 > Requirement already satisfied: Flask-Assets<3,>=2.0 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2.0)
2023-05-09 13:37:40,813 > Requirement already satisfied: Flask-Babel<3,>=2.0 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2.0.0)
2023-05-09 13:37:40,814 > Requirement already satisfied: Flask-Login<0.6,>=0.5 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (0.5.0)
2023-05-09 13:37:40,815 > Requirement already satisfied: Flask-Limiter<3,>=2.6 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2.9.2)
2023-05-09 13:37:40,816 > Requirement already satisfied: flask<2.2,>=2.1 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2.1.3)
2023-05-09 13:37:40,818 > Requirement already satisfied: frozendict<3,>=2.0 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2.3.7)
2023-05-09 13:37:40,819 > Requirement already satisfied: future<1,>=0.18.2 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (0.18.3)
2023-05-09 13:37:40,820 > Requirement already satisfied: markdown<4,>=3.2.2 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (3.4.3)
2023-05-09 13:37:40,821 > Requirement already satisfied: netaddr<0.9,>=0.8 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (0.8.0)
2023-05-09 13:37:40,822 > Requirement already satisfied: netifaces<1,>=0.11 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (0.11.0)
2023-05-09 13:37:40,823 > Requirement already satisfied: passlib<2,>=1.7.4 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.7.4)
2023-05-09 13:37:40,824 > Requirement already satisfied: pathvalidate<3,>=2.4.1 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2.5.2)
2023-05-09 13:37:40,825 > Requirement already satisfied: pkginfo<2,>=1.7.1 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.9.6)
2023-05-09 13:37:40,826 > Requirement already satisfied: pylru<2,>=1.2 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.2.1)
2023-05-09 13:37:40,827 > Requirement already satisfied: pyserial<4,>=3.4 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (3.5)
2023-05-09 13:37:40,827 > Requirement already satisfied: PyYAML<6,>=5.4.1 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (5.4.1)
2023-05-09 13:37:40,828 > Requirement already satisfied: requests<3,>=2.26.0 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2.28.2)
2023-05-09 13:37:40,829 > Requirement already satisfied: semantic_version<3,>=2.8.5 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2.10.0)
2023-05-09 13:37:40,830 > Requirement already satisfied: sentry-sdk<2,>=1.5.7 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.19.1)
2023-05-09 13:37:40,831 > Requirement already satisfied: tornado<7,>=6.0.4 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (6.2)
2023-05-09 13:37:40,834 > Requirement already satisfied: watchdog<2,>=1 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.0.2)
2023-05-09 13:37:40,835 > Requirement already satisfied: websocket-client<2,>=1.2.1 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.5.1)
2023-05-09 13:37:40,836 > Requirement already satisfied: werkzeug<2.1,>=2.0 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2.0.3)
2023-05-09 13:37:40,838 > Requirement already satisfied: wrapt<1.15,>=1.14 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.14.1)
2023-05-09 13:37:40,838 > Requirement already satisfied: zeroconf<0.34,>=0.33 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (0.33.4)
2023-05-09 13:37:40,839 > Requirement already satisfied: zipstream-ng<2.0.0,>=1.3.4 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.5.0)
2023-05-09 13:37:40,840 > Requirement already satisfied: blinker<2,>=1.4 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.6.1)
2023-05-09 13:37:40,841 > Requirement already satisfied: typing-extensions>=4.2 in /usr/lib/python3.10/site-packages (from blinker<2,>=1.4->OctoPrint>1.3.8->Octolapse==0.4.2) (4.5.0)
2023-05-09 13:37:40,842 > Requirement already satisfied: sgmllib3k in /usr/lib/python3.10/site-packages (from feedparser<7,>=6.0.8->OctoPrint>1.3.8->Octolapse==0.4.2) (1.0.0)
2023-05-09 13:37:40,843 > Requirement already satisfied: Jinja2>=3.0 in /usr/lib/python3.10/site-packages (from flask<2.2,>=2.1->OctoPrint>1.3.8->Octolapse==0.4.2) (3.1.2)
2023-05-09 13:37:40,844 > Requirement already satisfied: itsdangerous>=2.0 in /usr/lib/python3.10/site-packages (from flask<2.2,>=2.1->OctoPrint>1.3.8->Octolapse==0.4.2) (2.1.2)
2023-05-09 13:37:40,844 > Requirement already satisfied: webassets>=2.0 in /usr/lib/python3.10/site-packages (from Flask-Assets<3,>=2.0->OctoPrint>1.3.8->Octolapse==0.4.2) (2.0)
2023-05-09 13:37:40,845 > Requirement already satisfied: Babel>=2.3 in /usr/lib/python3.10/site-packages (from Flask-Babel<3,>=2.0->OctoPrint>1.3.8->Octolapse==0.4.2) (2.12.1)
2023-05-09 13:37:40,846 > Requirement already satisfied: pytz in /usr/lib/python3.10/site-packages (from Flask-Babel<3,>=2.0->OctoPrint>1.3.8->Octolapse==0.4.2) (2023.3)
2023-05-09 13:37:40,847 > Requirement already satisfied: limits>=2.8 in /usr/lib/python3.10/site-packages (from Flask-Limiter<3,>=2.6->OctoPrint>1.3.8->Octolapse==0.4.2) (3.3.1)
2023-05-09 13:37:40,848 > Requirement already satisfied: rich<13,>=12 in /usr/lib/python3.10/site-packages (from Flask-Limiter<3,>=2.6->OctoPrint>1.3.8->Octolapse==0.4.2) (12.6.0)
2023-05-09 13:37:40,849 > Requirement already satisfied: ordered-set<5,>4 in /usr/lib/python3.10/site-packages (from Flask-Limiter<3,>=2.6->OctoPrint>1.3.8->Octolapse==0.4.2) (4.1.0)
2023-05-09 13:37:40,849 > Requirement already satisfied: idna<4,>=2.5 in /usr/lib/python3.10/site-packages (from requests<3,>=2.26.0->OctoPrint>1.3.8->Octolapse==0.4.2) (3.4)
2023-05-09 13:37:40,850 > Requirement already satisfied: charset-normalizer<4,>=2 in /usr/lib/python3.10/site-packages (from requests<3,>=2.26.0->OctoPrint>1.3.8->Octolapse==0.4.2) (3.1.0)
2023-05-09 13:37:40,851 > Requirement already satisfied: certifi>=2017.4.17 in /usr/lib/python3.10/site-packages (from requests<3,>=2.26.0->OctoPrint>1.3.8->Octolapse==0.4.2) (2022.12.7)
2023-05-09 13:37:40,852 > Requirement already satisfied: urllib3<1.27,>=1.21.1 in /usr/lib/python3.10/site-packages (from requests<3,>=2.26.0->OctoPrint>1.3.8->Octolapse==0.4.2) (1.26.15)
2023-05-09 13:37:40,853 > Requirement already satisfied: ifaddr>=0.1.7 in /usr/lib/python3.10/site-packages (from zeroconf<0.34,>=0.33->OctoPrint>1.3.8->Octolapse==0.4.2) (0.2.0)
2023-05-09 13:37:40,854 > Requirement already satisfied: MarkupSafe>=2.0 in /usr/lib/python3.10/site-packages (from Jinja2>=3.0->flask<2.2,>=2.1->OctoPrint>1.3.8->Octolapse==0.4.2) (2.1.2)
2023-05-09 13:37:40,854 > Requirement already satisfied: packaging<24,>=21 in /usr/lib/python3.10/site-packages (from limits>=2.8->Flask-Limiter<3,>=2.6->OctoPrint>1.3.8->Octolapse==0.4.2) (23.0)
2023-05-09 13:37:40,855 > Requirement already satisfied: importlib-resources>=1.3 in /usr/lib/python3.10/site-packages (from limits>=2.8->Flask-Limiter<3,>=2.6->OctoPrint>1.3.8->Octolapse==0.4.2) (5.12.0)
2023-05-09 13:37:40,856 > Requirement already satisfied: deprecated>=1.2 in /usr/lib/python3.10/site-packages (from limits>=2.8->Flask-Limiter<3,>=2.6->OctoPrint>1.3.8->Octolapse==0.4.2) (1.2.13)
2023-05-09 13:37:40,858 > Requirement already satisfied: pygments<3.0.0,>=2.6.0 in /usr/lib/python3.10/site-packages (from rich<13,>=12->Flask-Limiter<3,>=2.6->OctoPrint>1.3.8->Octolapse==0.4.2) (2.15.0)
2023-05-09 13:37:40,858 > Requirement already satisfied: commonmark<0.10.0,>=0.9.0 in /usr/lib/python3.10/site-packages (from rich<13,>=12->Flask-Limiter<3,>=2.6->OctoPrint>1.3.8->Octolapse==0.4.2) (0.9.1)
2023-05-09 13:37:41,670 ! DEPRECATION: Octolapse is being installed using the legacy 'setup.py install' method, because it does not have a 'pyproject.toml' and the 'wheel' package is not installed. pip 23.1 will enforce this behaviour change. A possible replacement is to enable the '--use-pep517' option. Discussion can be found at https://github.com/pypa/pip/issues/8559
2023-05-09 13:37:42,172 > Installing collected packages: Octolapse
2023-05-09 13:37:42,172 > Running setup.py install for Octolapse: started
2023-05-09 13:38:35,549 > Running setup.py install for Octolapse: finished with status 'error'
2023-05-09 13:38:36,092 ! error: subprocess-exited-with-error
2023-05-09 13:38:36,092 ! 
2023-05-09 13:38:36,092 ! × Running setup.py install for Octolapse did not run successfully.
2023-05-09 13:38:36,093 ! │ exit code: 1
2023-05-09 13:38:36,093 ! ╰─> [1152 lines of output]
2023-05-09 13:38:36,093 ! likely tags: v0.4.2
2023-05-09 13:38:36,093 ! picking v0.4.2
2023-05-09 13:38:36,093 ! got version from expanded keyword {'version': 'v0.4.2', 'full-revisionid': 'c6c86782cdbfc3590fa4b1bf2e63064eb459b16b', 'dirty': False, 'error': None, 'date': '2023-04-02T10:23:21-0500'}
2023-05-09 13:38:36,094 ! Argon2 passlib backend is not available, not using it for password hashing
2023-05-09 13:38:36,094 ! /tmp/pip-req-build-a9r9byym/setup.py:58: DeprecationWarning: distutils Version classes are deprecated. Use packaging.version instead.
2023-05-09 13:38:36,094 ! if LooseVersion(octoprint.server.VERSION) < LooseVersion("1.4"):
2023-05-09 13:38:36,094 ! Found packages: {'octoprint_octolapse.test', 'octoprint_octolapse_setuptools', 'octoprint_octolapse'}
2023-05-09 13:38:36,095 ! running install
2023-05-09 13:38:36,095 ! /usr/lib/python3.10/site-packages/setuptools/command/install.py:34: SetuptoolsDeprecationWarning: setup.py install is deprecated. Use build and pip and other standards-based tools.
2023-05-09 13:38:36,095 ! warnings.warn(
2023-05-09 13:38:36,096 ! running build
2023-05-09 13:38:36,096 ! running build_py
2023-05-09 13:38:36,096 ! creating build
2023-05-09 13:38:36,096 ! creating build/lib.linux-aarch64-cpython-310
2023-05-09 13:38:36,096 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:38:36,096 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:38:36,096 ! copying octoprint_octolapse/test/test_settings.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:38:36,097 ! copying octoprint_octolapse/test/test_trigger_layer.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:38:36,097 ! copying octoprint_octolapse/test/__init__.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:38:36,097 ! copying octoprint_octolapse/test/test_extruder.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:38:36,097 ! copying octoprint_octolapse/test/test_parsing.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:38:36,097 ! copying octoprint_octolapse/test/test_render.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:38:36,097 ! copying octoprint_octolapse/test/test_timelapse.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:38:36,098 ! copying octoprint_octolapse/test/test_intersection.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:38:36,098 ! copying octoprint_octolapse/test/test_trigger_gcode.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:38:36,098 ! copying octoprint_octolapse/test/testing_utilities.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:38:36,098 ! copying octoprint_octolapse/test/test_octolapseplugin.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:38:36,098 ! copying octoprint_octolapse/test/test_position.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:38:36,098 ! copying octoprint_octolapse/test/test_trigger_timer.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:38:36,098 ! copying octoprint_octolapse/test/test_command.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:38:36,098 ! copying octoprint_octolapse/test/test_settings_slicer.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:38:36,099 ! copying octoprint_octolapse/test/test_utility.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:38:36,099 ! copying octoprint_octolapse/test/test_snapshotGcode.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:38:36,099 ! copying octoprint_octolapse/test/test_migration_version.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:38:36,099 ! copying octoprint_octolapse/test/test_trigger.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:38:36,104 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse_setuptools
2023-05-09 13:38:36,105 ! copying octoprint_octolapse_setuptools/__init__.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse_setuptools
2023-05-09 13:38:36,105 ! copying octoprint_octolapse/snapshot.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:38:36,105 ! copying octoprint_octolapse/log.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:38:36,105 ! copying octoprint_octolapse/__init__.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:38:36,106 ! copying octoprint_octolapse/messenger_worker.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:38:36,106 ! copying octoprint_octolapse/gcode_processor.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:38:36,106 ! copying octoprint_octolapse/gcode_commands.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:38:36,106 ! copying octoprint_octolapse/camera.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:38:36,106 ! copying octoprint_octolapse/position.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:38:36,106 ! copying octoprint_octolapse/stabilization_preprocessing.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:38:36,106 ! copying octoprint_octolapse/utility.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:38:36,107 ! copying octoprint_octolapse/settings_external.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:38:36,107 ! copying octoprint_octolapse/render.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:38:36,107 ! copying octoprint_octolapse/settings_preprocessor.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:38:36,107 ! copying octoprint_octolapse/script.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:38:36,107 ! copying octoprint_octolapse/migration.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:38:36,108 ! copying octoprint_octolapse/_version.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:38:36,108 ! copying octoprint_octolapse/stabilization_gcode.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:38:36,108 ! copying octoprint_octolapse/settings.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:38:36,108 ! copying octoprint_octolapse/error_messages.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:38:36,108 ! copying octoprint_octolapse/trigger.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:38:36,108 ! copying octoprint_octolapse/timelapse.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:38:36,108 ! running egg_info
2023-05-09 13:38:36,109 ! creating Octolapse.egg-info
2023-05-09 13:38:36,109 ! writing Octolapse.egg-info/PKG-INFO
2023-05-09 13:38:36,109 ! writing dependency_links to Octolapse.egg-info/dependency_links.txt
2023-05-09 13:38:36,109 ! writing entry points to Octolapse.egg-info/entry_points.txt
2023-05-09 13:38:36,109 ! writing requirements to Octolapse.egg-info/requires.txt
2023-05-09 13:38:36,109 ! writing top-level names to Octolapse.egg-info/top_level.txt
2023-05-09 13:38:36,109 ! writing manifest file 'Octolapse.egg-info/SOURCES.txt'
2023-05-09 13:38:36,109 ! reading manifest file 'Octolapse.egg-info/SOURCES.txt'
2023-05-09 13:38:36,110 ! reading manifest template 'MANIFEST.in'
2023-05-09 13:38:36,110 ! warning: no files found matching 'README.md'
2023-05-09 13:38:36,110 ! warning: no files found matching '*' under directory 'octoprint_octolapse/translations'
2023-05-09 13:38:36,110 ! warning: no files found matching '*' under directory 'octoprint_octolapse/data/images'
2023-05-09 13:38:36,110 ! adding license file 'LICENSE'
2023-05-09 13:38:36,110 ! writing manifest file 'Octolapse.egg-info/SOURCES.txt'
2023-05-09 13:38:36,110 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data' as data is deprecated, please list it in `packages`.
2023-05-09 13:38:36,111 ! !!
2023-05-09 13:38:36,111 ! 
2023-05-09 13:38:36,111 ! 
2023-05-09 13:38:36,111 ! ############################
2023-05-09 13:38:36,111 ! # Package would be ignored #
2023-05-09 13:38:36,111 ! ############################
2023-05-09 13:38:36,111 ! Python recognizes 'octoprint_octolapse.data' as an importable package,
2023-05-09 13:38:36,111 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:38:36,112 ! 
2023-05-09 13:38:36,112 ! 'octoprint_octolapse.data' has been automatically added to the distribution only
2023-05-09 13:38:36,112 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:38:36,112 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:38:36,112 ! 
2023-05-09 13:38:36,112 ! Please make sure that 'octoprint_octolapse.data' is included as a package by using
2023-05-09 13:38:36,113 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:38:36,114 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:38:36,115 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:38:36,115 ! 
2023-05-09 13:38:36,116 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:38:36,117 ! documentation page.
2023-05-09 13:38:36,118 ! 
2023-05-09 13:38:36,118 ! 
2023-05-09 13:38:36,119 ! !!
2023-05-09 13:38:36,121 ! 
2023-05-09 13:38:36,123 ! check.warn(importable)
2023-05-09 13:38:36,124 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.Images' as data is deprecated, please list it in `packages`.
2023-05-09 13:38:36,124 ! !!
2023-05-09 13:38:36,125 ! 
2023-05-09 13:38:36,125 ! 
2023-05-09 13:38:36,125 ! ############################
2023-05-09 13:38:36,125 ! # Package would be ignored #
2023-05-09 13:38:36,126 ! ############################
2023-05-09 13:38:36,126 ! Python recognizes 'octoprint_octolapse.data.Images' as an importable package,
2023-05-09 13:38:36,126 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:38:36,126 ! 
2023-05-09 13:38:36,126 ! 'octoprint_octolapse.data.Images' has been automatically added to the distribution only
2023-05-09 13:38:36,126 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:38:36,126 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:38:36,127 ! 
2023-05-09 13:38:36,127 ! Please make sure that 'octoprint_octolapse.data.Images' is included as a package by using
2023-05-09 13:38:36,127 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:38:36,127 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:38:36,127 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:38:36,127 ! 
2023-05-09 13:38:36,128 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:38:36,128 ! documentation page.
2023-05-09 13:38:36,128 ! 
2023-05-09 13:38:36,128 ! 
2023-05-09 13:38:36,128 ! !!
2023-05-09 13:38:36,128 ! 
2023-05-09 13:38:36,128 ! check.warn(importable)
2023-05-09 13:38:36,129 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.fonts.DejaVu' as data is deprecated, please list it in `packages`.
2023-05-09 13:38:36,129 ! !!
2023-05-09 13:38:36,129 ! 
2023-05-09 13:38:36,129 ! 
2023-05-09 13:38:36,129 ! ############################
2023-05-09 13:38:36,129 ! # Package would be ignored #
2023-05-09 13:38:36,130 ! ############################
2023-05-09 13:38:36,130 ! Python recognizes 'octoprint_octolapse.data.fonts.DejaVu' as an importable package,
2023-05-09 13:38:36,130 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:38:36,130 ! 
2023-05-09 13:38:36,130 ! 'octoprint_octolapse.data.fonts.DejaVu' has been automatically added to the distribution only
2023-05-09 13:38:36,130 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:38:36,130 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:38:36,131 ! 
2023-05-09 13:38:36,131 ! Please make sure that 'octoprint_octolapse.data.fonts.DejaVu' is included as a package by using
2023-05-09 13:38:36,131 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:38:36,131 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:38:36,131 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:38:36,131 ! 
2023-05-09 13:38:36,131 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:38:36,132 ! documentation page.
2023-05-09 13:38:36,132 ! 
2023-05-09 13:38:36,132 ! 
2023-05-09 13:38:36,132 ! !!
2023-05-09 13:38:36,132 ! 
2023-05-09 13:38:36,132 ! check.warn(importable)
2023-05-09 13:38:36,133 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.lib.c' as data is deprecated, please list it in `packages`.
2023-05-09 13:38:36,133 ! !!
2023-05-09 13:38:36,133 ! 
2023-05-09 13:38:36,133 ! 
2023-05-09 13:38:36,133 ! ############################
2023-05-09 13:38:36,133 ! # Package would be ignored #
2023-05-09 13:38:36,133 ! ############################
2023-05-09 13:38:36,134 ! Python recognizes 'octoprint_octolapse.data.lib.c' as an importable package,
2023-05-09 13:38:36,134 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:38:36,134 ! 
2023-05-09 13:38:36,134 ! 'octoprint_octolapse.data.lib.c' has been automatically added to the distribution only
2023-05-09 13:38:36,134 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:38:36,135 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:38:36,135 ! 
2023-05-09 13:38:36,135 ! Please make sure that 'octoprint_octolapse.data.lib.c' is included as a package by using
2023-05-09 13:38:36,135 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:38:36,135 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:38:36,135 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:38:36,135 ! 
2023-05-09 13:38:36,136 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:38:36,136 ! documentation page.
2023-05-09 13:38:36,136 ! 
2023-05-09 13:38:36,136 ! 
2023-05-09 13:38:36,136 ! !!
2023-05-09 13:38:36,136 ! 
2023-05-09 13:38:36,137 ! check.warn(importable)
2023-05-09 13:38:36,137 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.scripts.gcode.cura' as data is deprecated, please list it in `packages`.
2023-05-09 13:38:36,137 ! !!
2023-05-09 13:38:36,137 ! 
2023-05-09 13:38:36,137 ! 
2023-05-09 13:38:36,137 ! ############################
2023-05-09 13:38:36,137 ! # Package would be ignored #
2023-05-09 13:38:36,137 ! ############################
2023-05-09 13:38:36,138 ! Python recognizes 'octoprint_octolapse.data.scripts.gcode.cura' as an importable package,
2023-05-09 13:38:36,138 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:38:36,138 ! 
2023-05-09 13:38:36,138 ! 'octoprint_octolapse.data.scripts.gcode.cura' has been automatically added to the distribution only
2023-05-09 13:38:36,138 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:38:36,138 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:38:36,138 ! 
2023-05-09 13:38:36,138 ! Please make sure that 'octoprint_octolapse.data.scripts.gcode.cura' is included as a package by using
2023-05-09 13:38:36,139 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:38:36,139 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:38:36,139 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:38:36,139 ! 
2023-05-09 13:38:36,139 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:38:36,139 ! documentation page.
2023-05-09 13:38:36,139 ! 
2023-05-09 13:38:36,140 ! 
2023-05-09 13:38:36,140 ! !!
2023-05-09 13:38:36,140 ! 
2023-05-09 13:38:36,140 ! check.warn(importable)
2023-05-09 13:38:36,140 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.scripts.linux' as data is deprecated, please list it in `packages`.
2023-05-09 13:38:36,140 ! !!
2023-05-09 13:38:36,140 ! 
2023-05-09 13:38:36,140 ! 
2023-05-09 13:38:36,141 ! ############################
2023-05-09 13:38:36,141 ! # Package would be ignored #
2023-05-09 13:38:36,141 ! ############################
2023-05-09 13:38:36,141 ! Python recognizes 'octoprint_octolapse.data.scripts.linux' as an importable package,
2023-05-09 13:38:36,141 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:38:36,141 ! 
2023-05-09 13:38:36,141 ! 'octoprint_octolapse.data.scripts.linux' has been automatically added to the distribution only
2023-05-09 13:38:36,142 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:38:36,142 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:38:36,142 ! 
2023-05-09 13:38:36,142 ! Please make sure that 'octoprint_octolapse.data.scripts.linux' is included as a package by using
2023-05-09 13:38:36,142 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:38:36,142 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:38:36,142 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:38:36,142 ! 
2023-05-09 13:38:36,143 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:38:36,143 ! documentation page.
2023-05-09 13:38:36,143 ! 
2023-05-09 13:38:36,143 ! 
2023-05-09 13:38:36,143 ! !!
2023-05-09 13:38:36,143 ! 
2023-05-09 13:38:36,143 ! check.warn(importable)
2023-05-09 13:38:36,144 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.scripts.windows' as data is deprecated, please list it in `packages`.
2023-05-09 13:38:36,144 ! !!
2023-05-09 13:38:36,144 ! 
2023-05-09 13:38:36,144 ! 
2023-05-09 13:38:36,144 ! ############################
2023-05-09 13:38:36,144 ! # Package would be ignored #
2023-05-09 13:38:36,144 ! ############################
2023-05-09 13:38:36,145 ! Python recognizes 'octoprint_octolapse.data.scripts.windows' as an importable package,
2023-05-09 13:38:36,145 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:38:36,145 ! 
2023-05-09 13:38:36,145 ! 'octoprint_octolapse.data.scripts.windows' has been automatically added to the distribution only
2023-05-09 13:38:36,145 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:38:36,145 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:38:36,145 ! 
2023-05-09 13:38:36,146 ! Please make sure that 'octoprint_octolapse.data.scripts.windows' is included as a package by using
2023-05-09 13:38:36,146 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:38:36,146 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:38:36,146 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:38:36,146 ! 
2023-05-09 13:38:36,146 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:38:36,147 ! documentation page.
2023-05-09 13:38:36,147 ! 
2023-05-09 13:38:36,147 ! 
2023-05-09 13:38:36,147 ! !!
2023-05-09 13:38:36,147 ! 
2023-05-09 13:38:36,147 ! check.warn(importable)
2023-05-09 13:38:36,147 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.templates' as data is deprecated, please list it in `packages`.
2023-05-09 13:38:36,147 ! !!
2023-05-09 13:38:36,148 ! 
2023-05-09 13:38:36,148 ! 
2023-05-09 13:38:36,148 ! ############################
2023-05-09 13:38:36,148 ! # Package would be ignored #
2023-05-09 13:38:36,148 ! ############################
2023-05-09 13:38:36,148 ! Python recognizes 'octoprint_octolapse.data.templates' as an importable package,
2023-05-09 13:38:36,148 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:38:36,149 ! 
2023-05-09 13:38:36,149 ! 'octoprint_octolapse.data.templates' has been automatically added to the distribution only
2023-05-09 13:38:36,149 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:38:36,149 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:38:36,149 ! 
2023-05-09 13:38:36,149 ! Please make sure that 'octoprint_octolapse.data.templates' is included as a package by using
2023-05-09 13:38:36,149 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:38:36,149 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:38:36,150 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:38:36,150 ! 
2023-05-09 13:38:36,150 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:38:36,150 ! documentation page.
2023-05-09 13:38:36,150 ! 
2023-05-09 13:38:36,150 ! 
2023-05-09 13:38:36,150 ! !!
2023-05-09 13:38:36,150 ! 
2023-05-09 13:38:36,151 ! check.warn(importable)
2023-05-09 13:38:36,151 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.webcam_types' as data is deprecated, please list it in `packages`.
2023-05-09 13:38:36,151 ! !!
2023-05-09 13:38:36,151 ! 
2023-05-09 13:38:36,151 ! 
2023-05-09 13:38:36,151 ! ############################
2023-05-09 13:38:36,151 ! # Package would be ignored #
2023-05-09 13:38:36,152 ! ############################
2023-05-09 13:38:36,152 ! Python recognizes 'octoprint_octolapse.data.webcam_types' as an importable package,
2023-05-09 13:38:36,152 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:38:36,152 ! 
2023-05-09 13:38:36,152 ! 'octoprint_octolapse.data.webcam_types' has been automatically added to the distribution only
2023-05-09 13:38:36,152 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:38:36,152 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:38:36,152 ! 
2023-05-09 13:38:36,153 ! Please make sure that 'octoprint_octolapse.data.webcam_types' is included as a package by using
2023-05-09 13:38:36,153 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:38:36,153 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:38:36,153 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:38:36,153 ! 
2023-05-09 13:38:36,153 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:38:36,153 ! documentation page.
2023-05-09 13:38:36,154 ! 
2023-05-09 13:38:36,154 ! 
2023-05-09 13:38:36,154 ! !!
2023-05-09 13:38:36,154 ! 
2023-05-09 13:38:36,154 ! check.warn(importable)
2023-05-09 13:38:36,154 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.webcam_types.mjpg_streamer' as data is deprecated, please list it in `packages`.
2023-05-09 13:38:36,155 ! !!
2023-05-09 13:38:36,155 ! 
2023-05-09 13:38:36,155 ! 
2023-05-09 13:38:36,155 ! ############################
2023-05-09 13:38:36,155 ! # Package would be ignored #
2023-05-09 13:38:36,155 ! ############################
2023-05-09 13:38:36,155 ! Python recognizes 'octoprint_octolapse.data.webcam_types.mjpg_streamer' as an importable package,
2023-05-09 13:38:36,155 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:38:36,156 ! 
2023-05-09 13:38:36,156 ! 'octoprint_octolapse.data.webcam_types.mjpg_streamer' has been automatically added to the distribution only
2023-05-09 13:38:36,156 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:38:36,156 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:38:36,156 ! 
2023-05-09 13:38:36,156 ! Please make sure that 'octoprint_octolapse.data.webcam_types.mjpg_streamer' is included as a package by using
2023-05-09 13:38:36,156 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:38:36,157 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:38:36,157 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:38:36,157 ! 
2023-05-09 13:38:36,157 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:38:36,157 ! documentation page.
2023-05-09 13:38:36,157 ! 
2023-05-09 13:38:36,157 ! 
2023-05-09 13:38:36,157 ! !!
2023-05-09 13:38:36,158 ! 
2023-05-09 13:38:36,158 ! check.warn(importable)
2023-05-09 13:38:36,158 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.css' as data is deprecated, please list it in `packages`.
2023-05-09 13:38:36,158 ! !!
2023-05-09 13:38:36,158 ! 
2023-05-09 13:38:36,158 ! 
2023-05-09 13:38:36,158 ! ############################
2023-05-09 13:38:36,158 ! # Package would be ignored #
2023-05-09 13:38:36,159 ! ############################
2023-05-09 13:38:36,159 ! Python recognizes 'octoprint_octolapse.static.css' as an importable package,
2023-05-09 13:38:36,159 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:38:36,159 ! 
2023-05-09 13:38:36,159 ! 'octoprint_octolapse.static.css' has been automatically added to the distribution only
2023-05-09 13:38:36,159 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:38:36,159 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:38:36,159 ! 
2023-05-09 13:38:36,160 ! Please make sure that 'octoprint_octolapse.static.css' is included as a package by using
2023-05-09 13:38:36,160 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:38:36,160 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:38:36,160 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:38:36,160 ! 
2023-05-09 13:38:36,160 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:38:36,160 ! documentation page.
2023-05-09 13:38:36,160 ! 
2023-05-09 13:38:36,161 ! 
2023-05-09 13:38:36,161 ! !!
2023-05-09 13:38:36,161 ! 
2023-05-09 13:38:36,161 ! check.warn(importable)
2023-05-09 13:38:36,161 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.docs.help' as data is deprecated, please list it in `packages`.
2023-05-09 13:38:36,161 ! !!
2023-05-09 13:38:36,161 ! 
2023-05-09 13:38:36,161 ! 
2023-05-09 13:38:36,162 ! ############################
2023-05-09 13:38:36,162 ! # Package would be ignored #
2023-05-09 13:38:36,162 ! ############################
2023-05-09 13:38:36,162 ! Python recognizes 'octoprint_octolapse.static.docs.help' as an importable package,
2023-05-09 13:38:36,162 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:38:36,162 ! 
2023-05-09 13:38:36,162 ! 'octoprint_octolapse.static.docs.help' has been automatically added to the distribution only
2023-05-09 13:38:36,162 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:38:36,163 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:38:36,163 ! 
2023-05-09 13:38:36,163 ! Please make sure that 'octoprint_octolapse.static.docs.help' is included as a package by using
2023-05-09 13:38:36,163 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:38:36,163 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:38:36,163 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:38:36,163 ! 
2023-05-09 13:38:36,163 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:38:36,163 ! documentation page.
2023-05-09 13:38:36,164 ! 
2023-05-09 13:38:36,164 ! 
2023-05-09 13:38:36,164 ! !!
2023-05-09 13:38:36,164 ! 
2023-05-09 13:38:36,164 ! check.warn(importable)
2023-05-09 13:38:36,164 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.img' as data is deprecated, please list it in `packages`.
2023-05-09 13:38:36,164 ! !!
2023-05-09 13:38:36,165 ! 
2023-05-09 13:38:36,165 ! 
2023-05-09 13:38:36,165 ! ############################
2023-05-09 13:38:36,165 ! # Package would be ignored #
2023-05-09 13:38:36,165 ! ############################
2023-05-09 13:38:36,165 ! Python recognizes 'octoprint_octolapse.static.img' as an importable package,
2023-05-09 13:38:36,165 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:38:36,165 ! 
2023-05-09 13:38:36,166 ! 'octoprint_octolapse.static.img' has been automatically added to the distribution only
2023-05-09 13:38:36,166 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:38:36,166 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:38:36,166 ! 
2023-05-09 13:38:36,166 ! Please make sure that 'octoprint_octolapse.static.img' is included as a package by using
2023-05-09 13:38:36,166 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:38:36,166 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:38:36,167 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:38:36,167 ! 
2023-05-09 13:38:36,167 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:38:36,167 ! documentation page.
2023-05-09 13:38:36,167 ! 
2023-05-09 13:38:36,167 ! 
2023-05-09 13:38:36,167 ! !!
2023-05-09 13:38:36,167 ! 
2023-05-09 13:38:36,168 ! check.warn(importable)
2023-05-09 13:38:36,168 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.js' as data is deprecated, please list it in `packages`.
2023-05-09 13:38:36,168 ! !!
2023-05-09 13:38:36,168 ! 
2023-05-09 13:38:36,168 ! 
2023-05-09 13:38:36,168 ! ############################
2023-05-09 13:38:36,169 ! # Package would be ignored #
2023-05-09 13:38:36,169 ! ############################
2023-05-09 13:38:36,169 ! Python recognizes 'octoprint_octolapse.static.js' as an importable package,
2023-05-09 13:38:36,169 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:38:36,169 ! 
2023-05-09 13:38:36,169 ! 'octoprint_octolapse.static.js' has been automatically added to the distribution only
2023-05-09 13:38:36,169 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:38:36,170 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:38:36,170 ! 
2023-05-09 13:38:36,170 ! Please make sure that 'octoprint_octolapse.static.js' is included as a package by using
2023-05-09 13:38:36,170 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:38:36,170 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:38:36,170 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:38:36,170 ! 
2023-05-09 13:38:36,170 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:38:36,171 ! documentation page.
2023-05-09 13:38:36,171 ! 
2023-05-09 13:38:36,171 ! 
2023-05-09 13:38:36,171 ! !!
2023-05-09 13:38:36,171 ! 
2023-05-09 13:38:36,171 ! check.warn(importable)
2023-05-09 13:38:36,171 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.js.webcams.mjpg_streamer' as data is deprecated, please list it in `packages`.
2023-05-09 13:38:36,172 ! !!
2023-05-09 13:38:36,172 ! 
2023-05-09 13:38:36,172 ! 
2023-05-09 13:38:36,172 ! ############################
2023-05-09 13:38:36,172 ! # Package would be ignored #
2023-05-09 13:38:36,172 ! ############################
2023-05-09 13:38:36,172 ! Python recognizes 'octoprint_octolapse.static.js.webcams.mjpg_streamer' as an importable package,
2023-05-09 13:38:36,173 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:38:36,173 ! 
2023-05-09 13:38:36,173 ! 'octoprint_octolapse.static.js.webcams.mjpg_streamer' has been automatically added to the distribution only
2023-05-09 13:38:36,173 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:38:36,173 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:38:36,173 ! 
2023-05-09 13:38:36,173 ! Please make sure that 'octoprint_octolapse.static.js.webcams.mjpg_streamer' is included as a package by using
2023-05-09 13:38:36,174 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:38:36,174 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:38:36,174 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:38:36,174 ! 
2023-05-09 13:38:36,174 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:38:36,174 ! documentation page.
2023-05-09 13:38:36,174 ! 
2023-05-09 13:38:36,175 ! 
2023-05-09 13:38:36,175 ! !!
2023-05-09 13:38:36,175 ! 
2023-05-09 13:38:36,175 ! check.warn(importable)
2023-05-09 13:38:36,175 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.templates' as data is deprecated, please list it in `packages`.
2023-05-09 13:38:36,175 ! !!
2023-05-09 13:38:36,175 ! 
2023-05-09 13:38:36,176 ! 
2023-05-09 13:38:36,176 ! ############################
2023-05-09 13:38:36,176 ! # Package would be ignored #
2023-05-09 13:38:36,176 ! ############################
2023-05-09 13:38:36,176 ! Python recognizes 'octoprint_octolapse.templates' as an importable package,
2023-05-09 13:38:36,177 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:38:36,177 ! 
2023-05-09 13:38:36,177 ! 'octoprint_octolapse.templates' has been automatically added to the distribution only
2023-05-09 13:38:36,177 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:38:36,177 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:38:36,177 ! 
2023-05-09 13:38:36,177 ! Please make sure that 'octoprint_octolapse.templates' is included as a package by using
2023-05-09 13:38:36,178 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:38:36,178 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:38:36,178 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:38:36,178 ! 
2023-05-09 13:38:36,178 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:38:36,178 ! documentation page.
2023-05-09 13:38:36,178 ! 
2023-05-09 13:38:36,179 ! 
2023-05-09 13:38:36,179 ! !!
2023-05-09 13:38:36,179 ! 
2023-05-09 13:38:36,179 ! check.warn(importable)
2023-05-09 13:38:36,179 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.templates.webcams.mjpg_streamer' as data is deprecated, please list it in `packages`.
2023-05-09 13:38:36,179 ! !!
2023-05-09 13:38:36,179 ! 
2023-05-09 13:38:36,180 ! 
2023-05-09 13:38:36,180 ! ############################
2023-05-09 13:38:36,180 ! # Package would be ignored #
2023-05-09 13:38:36,180 ! ############################
2023-05-09 13:38:36,180 ! Python recognizes 'octoprint_octolapse.templates.webcams.mjpg_streamer' as an importable package,
2023-05-09 13:38:36,180 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:38:36,180 ! 
2023-05-09 13:38:36,181 ! 'octoprint_octolapse.templates.webcams.mjpg_streamer' has been automatically added to the distribution only
2023-05-09 13:38:36,181 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:38:36,181 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:38:36,181 ! 
2023-05-09 13:38:36,181 ! Please make sure that 'octoprint_octolapse.templates.webcams.mjpg_streamer' is included as a package by using
2023-05-09 13:38:36,181 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:38:36,181 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:38:36,182 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:38:36,182 ! 
2023-05-09 13:38:36,182 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:38:36,182 ! documentation page.
2023-05-09 13:38:36,182 ! 
2023-05-09 13:38:36,182 ! 
2023-05-09 13:38:36,183 ! !!
2023-05-09 13:38:36,183 ! 
2023-05-09 13:38:36,183 ! check.warn(importable)
2023-05-09 13:38:36,183 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:38:36,183 ! copying octoprint_octolapse/data/settings_default_0.3.3rc3.dev0.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:38:36,183 ! copying octoprint_octolapse/data/settings_default_0.4.0.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:38:36,184 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev0.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:38:36,184 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev2.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:38:36,184 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev3.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:38:36,184 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev4.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:38:36,184 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev5.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:38:36,184 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:38:36,185 ! copying octoprint_octolapse/data/settings_default_0.4.0rc2.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:38:36,185 ! copying octoprint_octolapse/data/settings_default_0.4.0rc3.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:38:36,185 ! copying octoprint_octolapse/data/settings_default_current.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:38:36,185 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 13:38:36,185 ! copying octoprint_octolapse/data/Images/no-camera-selected.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 13:38:36,185 ! copying octoprint_octolapse/data/Images/no-image-available.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 13:38:36,186 ! copying octoprint_octolapse/data/Images/no_snapshot.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 13:38:36,186 ! copying octoprint_octolapse/data/Images/test-snapshot-image.jpg -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 13:38:36,186 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/fonts
2023-05-09 13:38:36,186 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/fonts/DejaVu
2023-05-09 13:38:36,186 ! copying octoprint_octolapse/data/fonts/DejaVu/DejaVuSansMono.ttf -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/fonts/DejaVu
2023-05-09 13:38:36,186 ! copying octoprint_octolapse/data/fonts/DejaVu/license.txt -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/fonts/DejaVu
2023-05-09 13:38:36,186 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib
2023-05-09 13:38:36,187 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:38:36,187 ! copying octoprint_octolapse/data/lib/c/extruder.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:38:36,187 ! copying octoprint_octolapse/data/lib/c/extruder.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:38:36,187 ! copying octoprint_octolapse/data/lib/c/gcode_comment_processor.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:38:36,187 ! copying octoprint_octolapse/data/lib/c/gcode_comment_processor.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:38:36,187 ! copying octoprint_octolapse/data/lib/c/gcode_parser.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:38:36,188 ! copying octoprint_octolapse/data/lib/c/gcode_parser.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:38:36,188 ! copying octoprint_octolapse/data/lib/c/gcode_position.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:38:36,188 ! copying octoprint_octolapse/data/lib/c/gcode_position.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:38:36,188 ! copying octoprint_octolapse/data/lib/c/gcode_position_processor.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:38:36,188 ! copying octoprint_octolapse/data/lib/c/gcode_position_processor.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:38:36,188 ! copying octoprint_octolapse/data/lib/c/logging.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:38:36,188 ! copying octoprint_octolapse/data/lib/c/logging.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:38:36,189 ! copying octoprint_octolapse/data/lib/c/parsed_command.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:38:36,189 ! copying octoprint_octolapse/data/lib/c/parsed_command.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:38:36,189 ! copying octoprint_octolapse/data/lib/c/parsed_command_parameter.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:38:36,189 ! copying octoprint_octolapse/data/lib/c/parsed_command_parameter.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:38:36,189 ! copying octoprint_octolapse/data/lib/c/position.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:38:36,189 ! copying octoprint_octolapse/data/lib/c/position.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:38:36,189 ! copying octoprint_octolapse/data/lib/c/python_helpers.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:38:36,190 ! copying octoprint_octolapse/data/lib/c/python_helpers.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:38:36,190 ! copying octoprint_octolapse/data/lib/c/snapshot_plan.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:38:36,190 ! copying octoprint_octolapse/data/lib/c/snapshot_plan.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:38:36,190 ! copying octoprint_octolapse/data/lib/c/snapshot_plan_step.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:38:36,190 ! copying octoprint_octolapse/data/lib/c/snapshot_plan_step.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:38:36,190 ! copying octoprint_octolapse/data/lib/c/stabilization.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:38:36,190 ! copying octoprint_octolapse/data/lib/c/stabilization.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:38:36,191 ! copying octoprint_octolapse/data/lib/c/stabilization_results.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:38:36,191 ! copying octoprint_octolapse/data/lib/c/stabilization_results.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:38:36,191 ! copying octoprint_octolapse/data/lib/c/stabilization_smart_gcode.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:38:36,191 ! copying octoprint_octolapse/data/lib/c/stabilization_smart_gcode.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:38:36,191 ! copying octoprint_octolapse/data/lib/c/stabilization_smart_layer.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:38:36,191 ! copying octoprint_octolapse/data/lib/c/stabilization_smart_layer.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:38:36,191 ! copying octoprint_octolapse/data/lib/c/stabilization_snap_to_print.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:38:36,192 ! copying octoprint_octolapse/data/lib/c/stabilization_snap_to_print.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:38:36,192 ! copying octoprint_octolapse/data/lib/c/trigger_position.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:38:36,192 ! copying octoprint_octolapse/data/lib/c/trigger_position.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:38:36,192 ! copying octoprint_octolapse/data/lib/c/utilities.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:38:36,192 ! copying octoprint_octolapse/data/lib/c/utilities.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:38:36,192 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts
2023-05-09 13:38:36,192 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode
2023-05-09 13:38:36,193 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:38:36,193 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:38:36,193 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_02_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:38:36,193 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_03_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:38:36,193 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_04_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:38:36,193 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_05_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:38:36,193 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_06_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:38:36,194 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_07_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:38:36,194 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_08_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:38:36,194 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:38:36,194 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:38:36,194 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_02_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:38:36,195 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_03_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:38:36,195 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_04_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:38:36,195 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_05_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:38:36,195 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_06_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:38:36,195 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_07_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:38:36,195 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_08_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:38:36,196 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:38:36,196 ! copying octoprint_octolapse/data/scripts/linux/capture_image_leave_on_camera.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:38:36,196 ! copying octoprint_octolapse/data/scripts/linux/download-from-camera-and-rename.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:38:36,196 ! copying octoprint_octolapse/data/scripts/linux/initialize_dslr.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:38:36,196 ! copying octoprint_octolapse/data/scripts/linux/move_snapshots_to_target.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:38:36,196 ! copying octoprint_octolapse/data/scripts/linux/take_snapshot_and_download.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:38:36,196 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/windows
2023-05-09 13:38:36,197 ! copying octoprint_octolapse/data/scripts/windows/take_snapshot_and_download.bat -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/windows
2023-05-09 13:38:36,197 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/templates
2023-05-09 13:38:36,197 ! copying octoprint_octolapse/data/templates/cura_gcode_settings_template.txt -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/templates
2023-05-09 13:38:36,197 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types
2023-05-09 13:38:36,197 ! copying octoprint_octolapse/data/webcam_types/camera_types.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types
2023-05-09 13:38:36,197 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:38:36,198 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/logitech_c250.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:38:36,198 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/logitech_c920.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:38:36,198 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/logitech_c920_2.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:38:36,198 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/logitech_c920_3.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:38:36,198 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/raspi_cam_v2.1.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:38:36,198 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/raspi_cam_v2.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:38:36,198 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static
2023-05-09 13:38:36,198 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/css
2023-05-09 13:38:36,199 ! copying octoprint_octolapse/static/css/jquery.minicolors.css -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/css
2023-05-09 13:38:36,199 ! copying octoprint_octolapse/static/css/jquery.minicolors.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/css
2023-05-09 13:38:36,199 ! copying octoprint_octolapse/static/css/octolapse.css -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/css
2023-05-09 13:38:36,199 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs
2023-05-09 13:38:36,199 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,199 ! copying octoprint_octolapse/static/docs/help/dialog.renderings.in_process.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,199 ! copying octoprint_octolapse/static/docs/help/dialog.renderings.unfinished.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,200 ! copying octoprint_octolapse/static/docs/help/dialog.timelapse_files.snapshot_archive.import.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,200 ! copying octoprint_octolapse/static/docs/help/dialog.timelapse_files.snapshot_archive.tab.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,200 ! copying octoprint_octolapse/static/docs/help/dialog.timelapse_files.timelapse.tab.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,200 ! copying octoprint_octolapse/static/docs/help/error_help_error_not_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,200 ! copying octoprint_octolapse/static/docs/help/error_help_init_automatic_slicer_no_settings_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,200 ! copying octoprint_octolapse/static/docs/help/error_help_init_automatic_slicer_settings_missing.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,200 ! copying octoprint_octolapse/static/docs/help/error_help_init_before_print_start_camera_script_apply_failed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,201 ! copying octoprint_octolapse/static/docs/help/error_help_init_camera_init_test_failed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,201 ! copying octoprint_octolapse/static/docs/help/error_help_init_camera_settings_apply_failed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,201 ! copying octoprint_octolapse/static/docs/help/error_help_init_cant_print_from_sd.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,201 ! copying octoprint_octolapse/static/docs/help/error_help_init_directory_test_failed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,201 ! copying octoprint_octolapse/static/docs/help/error_help_init_ffmpeg_not_found_at_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,201 ! copying octoprint_octolapse/static/docs/help/error_help_init_ffmpeg_path_not_set.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,201 ! copying octoprint_octolapse/static/docs/help/error_help_init_ffmpeg_path_retrieve_exception.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,202 ! copying octoprint_octolapse/static/docs/help/error_help_init_incorrect_octoprint_version.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,202 ! copying octoprint_octolapse/static/docs/help/error_help_init_incorrect_print_start_state.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,202 ! copying octoprint_octolapse/static/docs/help/error_help_init_m114_not_supported.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,202 ! copying octoprint_octolapse/static/docs/help/error_help_init_manual_slicer_settings_missing.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,202 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_current_job_data_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,202 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_current_job_file_data_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,203 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_enabled_cameras.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,203 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_gcode_filepath_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,203 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_printer_profile_exists.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,203 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_printer_profile_selected.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,203 ! copying octoprint_octolapse/static/docs/help/error_help_init_octolapse_is_disabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,204 ! copying octoprint_octolapse/static/docs/help/error_help_init_overlay_font_path_not_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,204 ! copying octoprint_octolapse/static/docs/help/error_help_init_printer_not_configured.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,204 ! copying octoprint_octolapse/static/docs/help/error_help_init_rendering_file_template_invalid.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,205 ! copying octoprint_octolapse/static/docs/help/error_help_init_timelapse_start_exception.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,205 ! copying octoprint_octolapse/static/docs/help/error_help_init_too_few_extruders_defined.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,205 ! copying octoprint_octolapse/static/docs/help/error_help_init_too_few_extruders_offsets_defined.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,205 ! copying octoprint_octolapse/static/docs/help/error_help_init_unable_to_accept_snapshot_plan.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,205 ! copying octoprint_octolapse/static/docs/help/error_help_init_unexpected_exception.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,205 ! copying octoprint_octolapse/static/docs/help/error_help_init_unknown_file_origin.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,205 ! copying octoprint_octolapse/static/docs/help/error_help_not_a_valid_error_dict.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,206 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_axis_mode_e_unknown.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,206 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_axis_mode_xyz_unknown.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,206 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_incorrect_trigger_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,206 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_no_definite_position.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,206 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_no_metric_units.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,206 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_no_snapshot_commands_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,206 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_no_snapshot_plans_returned.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,207 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_printer_not_primed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,207 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_unhandled_exception.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,207 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_unknown_trigger_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,207 ! copying octoprint_octolapse/static/docs/help/error_help_rendering_archive_import_no_files_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,207 ! copying octoprint_octolapse/static/docs/help/error_help_rendering_archive_import_zip_file_corrupt.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,207 ! copying octoprint_octolapse/static/docs/help/error_help_rendering_archive_import_zip_file_too_large.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,207 ! copying octoprint_octolapse/static/docs/help/error_help_settings_slicer_simplify3d_duplicate_toolhead_numbers.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,208 ! copying octoprint_octolapse/static/docs/help/error_help_settings_slicer_simplify3d_extruder_count_mismatch.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,208 ! copying octoprint_octolapse/static/docs/help/error_help_settings_slicer_simplify3d_max_extruder_count_exceeded.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,208 ! copying octoprint_octolapse/static/docs/help/error_help_settings_slicer_simplify3d_unexpected_max_toolhead_number.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,208 ! copying octoprint_octolapse/static/docs/help/error_help_timelapse_cannot_aquire_job_lock.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,208 ! copying octoprint_octolapse/static/docs/help/main_settings.auto_reload_frames.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,208 ! copying octoprint_octolapse/static/docs/help/main_settings.auto_reload_latest_snapshot.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,209 ! copying octoprint_octolapse/static/docs/help/main_settings.automatic_update_interval_days.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,209 ! copying octoprint_octolapse/static/docs/help/main_settings.automatic_updates_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,209 ! copying octoprint_octolapse/static/docs/help/main_settings.cancel_print_on_startup_error.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,209 ! copying octoprint_octolapse/static/docs/help/main_settings.enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,209 ! copying octoprint_octolapse/static/docs/help/main_settings.is_test_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,209 ! copying octoprint_octolapse/static/docs/help/main_settings.preview_snapshot_plan_autoclose.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,209 ! copying octoprint_octolapse/static/docs/help/main_settings.preview_snapshot_plan_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,210 ! copying octoprint_octolapse/static/docs/help/main_settings.preview_snapshot_plans.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,210 ! copying octoprint_octolapse/static/docs/help/main_settings.show_extruder_state_changes.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,210 ! copying octoprint_octolapse/static/docs/help/main_settings.show_navbar_icon.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,210 ! copying octoprint_octolapse/static/docs/help/main_settings.show_navbar_when_not_printing.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,210 ! copying octoprint_octolapse/static/docs/help/main_settings.show_position_changes.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,210 ! copying octoprint_octolapse/static/docs/help/main_settings.show_printer_state_changes.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,210 ! copying octoprint_octolapse/static/docs/help/main_settings.show_snapshot_plan_information.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,211 ! copying octoprint_octolapse/static/docs/help/main_settings.show_trigger_state_changes.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,211 ! copying octoprint_octolapse/static/docs/help/main_settings.snapshot_archive_directory.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,211 ! copying octoprint_octolapse/static/docs/help/main_settings.temporary_directory.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,211 ! copying octoprint_octolapse/static/docs/help/main_settings.timelapse_directory.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,211 ! copying octoprint_octolapse/static/docs/help/profiles.camera.apply_settings_at_startup.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,211 ! copying octoprint_octolapse/static/docs/help/profiles.camera.apply_settings_before_print.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,211 ! copying octoprint_octolapse/static/docs/help/profiles.camera.apply_settings_when_disabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,212 ! copying octoprint_octolapse/static/docs/help/profiles.camera.camera_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,212 ! copying octoprint_octolapse/static/docs/help/profiles.camera.delay.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,212 ! copying octoprint_octolapse/static/docs/help/profiles.camera.edit_cutsom_image_preferences.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,212 ! copying octoprint_octolapse/static/docs/help/profiles.camera.external_camera_snapshot_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,212 ! copying octoprint_octolapse/static/docs/help/profiles.camera.gcode_camera_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,212 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_after_render_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,212 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_after_snapshot_gcode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,213 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_after_snapshot_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,213 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_before_render_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,213 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_before_snapshot_gcode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,213 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_before_snapshot_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,213 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_print_end_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,213 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_print_start_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,213 ! copying octoprint_octolapse/static/docs/help/profiles.camera.snapshot_transpose.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,214 ! copying octoprint_octolapse/static/docs/help/profiles.camera.stream_template.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,214 ! copying octoprint_octolapse/static/docs/help/profiles.camera.timeout_ms.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,214 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.address.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,214 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.enable_custom_image_preferences.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,214 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.ignore_ssl_error.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,215 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.1.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,215 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029518.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,215 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029519.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,215 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029538.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,215 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029670.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,215 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029671.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,215 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029675.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,216 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094849.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,216 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094850.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,216 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094851.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,216 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094856.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,216 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094857.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,216 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094858.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,217 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094860.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,217 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094861.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,217 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094867.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,217 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094868.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,217 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094870.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,217 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094871.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,217 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094872.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,217 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094873.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,218 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094874.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,218 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10291459.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,218 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963776.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,218 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963777.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,218 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963778.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,218 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963788.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,218 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963790.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,219 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963791.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,219 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963795.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,219 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963796.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,219 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963797.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,219 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963800.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,219 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963802.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,219 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963803.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,220 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963804.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,220 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963807.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,220 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963810.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,220 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963818.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,220 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.password.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,220 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.snapshot_request_template.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,220 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.stream_download.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,221 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.username.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,221 ! copying octoprint_octolapse/static/docs/help/profiles.library.is_custom.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,221 ! copying octoprint_octolapse/static/docs/help/profiles.logging.enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,221 ! copying octoprint_octolapse/static/docs/help/profiles.logging.log_all_errors.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,221 ! copying octoprint_octolapse/static/docs/help/profiles.logging.log_to_console.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,221 ! copying octoprint_octolapse/static/docs/help/profiles.logging.logging_level.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,221 ! copying octoprint_octolapse/static/docs/help/profiles.logging.manage_log_files.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,222 ! copying octoprint_octolapse/static/docs/help/profiles.logging.modules_to_log.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,222 ! copying octoprint_octolapse/static/docs/help/profiles.printer.auto_detect_position.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,222 ! copying octoprint_octolapse/static/docs/help/profiles.printer.auto_position_detection_commands.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,222 ! copying octoprint_octolapse/static/docs/help/profiles.printer.automatic_configuration.is_automatic.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,222 ! copying octoprint_octolapse/static/docs/help/profiles.printer.automatic_configuration.make.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,222 ! copying octoprint_octolapse/static/docs/help/profiles.printer.automatic_configuration.model.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,222 ! copying octoprint_octolapse/static/docs/help/profiles.printer.bed_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,222 ! copying octoprint_octolapse/static/docs/help/profiles.printer.custom_bounding_box.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,223 ! copying octoprint_octolapse/static/docs/help/profiles.printer.default_extruder.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,223 ! copying octoprint_octolapse/static/docs/help/profiles.printer.default_firmware_retractions.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,223 ! copying octoprint_octolapse/static/docs/help/profiles.printer.default_firmware_retractions_zhop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,223 ! copying octoprint_octolapse/static/docs/help/profiles.printer.e_axis_default_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,223 ! copying octoprint_octolapse/static/docs/help/profiles.printer.extruder_offsets.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,223 ! copying octoprint_octolapse/static/docs/help/profiles.printer.g90_influences_extruder.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,223 ! copying octoprint_octolapse/static/docs/help/profiles.printer.gocde_axis_compatibility_mode_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,223 ! copying octoprint_octolapse/static/docs/help/profiles.printer.home_axis_gcode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,224 ! copying octoprint_octolapse/static/docs/help/profiles.printer.invert_e.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,224 ! copying octoprint_octolapse/static/docs/help/profiles.printer.invert_x.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,224 ! copying octoprint_octolapse/static/docs/help/profiles.printer.invert_y.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,224 ! copying octoprint_octolapse/static/docs/help/profiles.printer.invert_z.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,224 ! copying octoprint_octolapse/static/docs/help/profiles.printer.minimum_layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,224 ! copying octoprint_octolapse/static/docs/help/profiles.printer.num_extruders.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,224 ! copying octoprint_octolapse/static/docs/help/profiles.printer.origin_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,225 ! copying octoprint_octolapse/static/docs/help/profiles.printer.override_octoprint_profile_settings.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,225 ! copying octoprint_octolapse/static/docs/help/profiles.printer.priming_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,225 ! copying octoprint_octolapse/static/docs/help/profiles.printer.restrict_snapshot_area.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,225 ! copying octoprint_octolapse/static/docs/help/profiles.printer.shared_extruder.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,225 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicer_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,225 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.automatic.continue_on_failure.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,225 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.automatic.disable_automatic_save.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,225 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.4_2.speed_z_hop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,226 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,226 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.max_feedrate_z_override.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,226 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_amount.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,226 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_enable.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,226 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_hop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,226 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_hop_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,226 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_prime_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,226 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_retract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,227 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.smooth_spiralized_contours.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,227 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.speed_travel.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,227 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.axis_speed_display_unit_options.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,227 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.deretract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,227 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,227 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.retract_before_move.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,227 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.retract_length.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,227 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.retract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,228 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.travel_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,228 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.vase_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,228 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.z_hop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,228 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.z_travel_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,228 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.extruder_use_retract.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,228 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,228 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.retraction_distance.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,229 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.retraction_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,229 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.retraction_vertical_lift.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,229 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.vase_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,229 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.x_y_axis_movement_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,229 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.z_axis_movement_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,229 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.deretract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,229 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,229 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.retract_length.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,230 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.retract_lift.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,230 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.retract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,230 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.travel_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,230 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.vase_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,230 ! copying octoprint_octolapse/static/docs/help/profiles.printer.snapshot_command.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,230 ! copying octoprint_octolapse/static/docs/help/profiles.printer.suppress_snapshot_command_always.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,230 ! copying octoprint_octolapse/static/docs/help/profiles.printer.units_default.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,231 ! copying octoprint_octolapse/static/docs/help/profiles.printer.xyz_axes_default_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,231 ! copying octoprint_octolapse/static/docs/help/profiles.printer.zero_based_extruder.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,231 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.archive_snapshots.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,231 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.bitrate.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,231 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.constant_rate_factor.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,231 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.enable_watermark.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,231 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,232 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.fps.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,232 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.fps_calculation_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,232 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.max_fps.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,232 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.min_fps.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,232 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.output_format.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,232 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.output_template.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,233 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_font_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,233 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_font_size.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,233 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_outline_color.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,233 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_outline_width.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,233 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_preview.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,233 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_alignment.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,233 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_color.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,234 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_halign.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,234 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_pos_xy.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,234 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_template.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,234 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_template_current_time.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,234 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_template_time_elapsed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,234 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_valign.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,235 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.post_roll_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,235 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.pre_roll_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,235 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.run_length_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,235 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.thread_count.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,235 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.wait_for_moves_to_finish.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,236 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_fixed_coordinate.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,236 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_fixed_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,236 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_fixed_path_invert_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,236 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_fixed_path_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,236 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_relative.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,236 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_relative_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,237 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_relative_path_invert_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,237 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_relative_path_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,237 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,237 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_fixed_coordinate.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,237 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_fixed_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,237 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_fixed_path_invert_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,238 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_fixed_path_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,238 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_relative.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,238 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_relative_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,238 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_relative_path_invert_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,238 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_relative_path_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,238 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,238 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.calculate_intersections.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,238 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.extruder_state_requirements_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,239 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.layer_trigger_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,239 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.position_restriction_shape.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,239 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.position_restriction_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,239 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.position_restrictions_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,239 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.require_zhop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,239 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.smart_layer_disable_z_lift.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,239 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.smart_layer_snap_to_print_high_quality.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,240 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.smart_layer_snap_to_print_smooth.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,240 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.smart_layer_trigger_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,240 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.timer_trigger_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,240 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.trigger_subtype.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,240 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.trigger_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,240 ! copying octoprint_octolapse/static/docs/help/quality_issues_fast_trigger.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,240 ! copying octoprint_octolapse/static/docs/help/quality_issues_low_quality_snap_to_print.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,241 ! copying octoprint_octolapse/static/docs/help/quality_issues_no_print_features_detected.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,241 ! copying octoprint_octolapse/static/docs/help/settings.import.import_method.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,241 ! copying octoprint_octolapse/static/docs/help/settings.import.import_text.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,241 ! copying octoprint_octolapse/static/docs/help/snapshot_plan_missed_snapshots.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:38:36,241 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/img
2023-05-09 13:38:36,241 ! copying octoprint_octolapse/static/img/watermark.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/img
2023-05-09 13:38:36,241 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:38:36,242 ! copying octoprint_octolapse/static/js/jquery.minicolors.min.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:38:36,242 ! copying octoprint_octolapse/static/js/jquery.validate.min.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:38:36,242 ! copying octoprint_octolapse/static/js/octolapse.dialog.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:38:36,242 ! copying octoprint_octolapse/static/js/octolapse.dialog.renderings.in_process.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:38:36,242 ! copying octoprint_octolapse/static/js/octolapse.dialog.renderings.unfinished.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:38:36,242 ! copying octoprint_octolapse/static/js/octolapse.dialog.timelapse_files.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:38:36,242 ! copying octoprint_octolapse/static/js/octolapse.file_browser.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:38:36,243 ! copying octoprint_octolapse/static/js/octolapse.help.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:38:36,243 ! copying octoprint_octolapse/static/js/octolapse.helpers.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:38:36,243 ! copying octoprint_octolapse/static/js/octolapse.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:38:36,243 ! copying octoprint_octolapse/static/js/octolapse.profiles.camera.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:38:36,243 ! copying octoprint_octolapse/static/js/octolapse.profiles.camera.webcam.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:38:36,243 ! copying octoprint_octolapse/static/js/octolapse.profiles.camera.webcam.mjpg_streamer.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:38:36,243 ! copying octoprint_octolapse/static/js/octolapse.profiles.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:38:36,244 ! copying octoprint_octolapse/static/js/octolapse.profiles.library.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:38:36,244 ! copying octoprint_octolapse/static/js/octolapse.profiles.logging.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:38:36,244 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:38:36,244 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.slicer.cura.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:38:36,244 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.slicer.other.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:38:36,244 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.slicer.simplify_3d.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:38:36,244 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.slicer.slic3r_pe.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:38:36,245 ! copying octoprint_octolapse/static/js/octolapse.profiles.rendering.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:38:36,245 ! copying octoprint_octolapse/static/js/octolapse.profiles.stabilization.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:38:36,245 ! copying octoprint_octolapse/static/js/octolapse.profiles.trigger.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:38:36,245 ! copying octoprint_octolapse/static/js/octolapse.settings.import.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:38:36,245 ! copying octoprint_octolapse/static/js/octolapse.settings.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:38:36,245 ! copying octoprint_octolapse/static/js/octolapse.settings.main.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:38:36,245 ! copying octoprint_octolapse/static/js/octolapse.status.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:38:36,246 ! copying octoprint_octolapse/static/js/octolapse.status.snapshotplan.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:38:36,246 ! copying octoprint_octolapse/static/js/octolapse.status.snapshotplan_preview.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:38:36,246 ! copying octoprint_octolapse/static/js/showdown.min.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:38:36,246 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js/webcams
2023-05-09 13:38:36,246 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js/webcams/mjpg_streamer
2023-05-09 13:38:36,246 ! copying octoprint_octolapse/static/js/webcams/mjpg_streamer/raspi_cam_v2.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js/webcams/mjpg_streamer
2023-05-09 13:38:36,246 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:38:36,247 ! copying octoprint_octolapse/templates/octolapse_dialog.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:38:36,247 ! copying octoprint_octolapse/templates/octolapse_dialog_rendering_in_process.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:38:36,247 ! copying octoprint_octolapse/templates/octolapse_dialog_rendering_unfinished.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:38:36,247 ! copying octoprint_octolapse/templates/octolapse_dialog_timelapse_files.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:38:36,247 ! copying octoprint_octolapse/templates/octolapse_file_browser.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:38:36,247 ! copying octoprint_octolapse/templates/octolapse_helpers.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:38:36,247 ! copying octoprint_octolapse/templates/octolapse_navbar.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:38:36,248 ! copying octoprint_octolapse/templates/octolapse_profile_dialog_add_edit.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:38:36,248 ! copying octoprint_octolapse/templates/octolapse_profiles.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:38:36,248 ! copying octoprint_octolapse/templates/octolapse_profiles_camera.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:38:36,248 ! copying octoprint_octolapse/templates/octolapse_profiles_camera_webcam.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:38:36,248 ! copying octoprint_octolapse/templates/octolapse_profiles_camera_webcam_mjpg_streamer.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:38:36,248 ! copying octoprint_octolapse/templates/octolapse_profiles_library.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:38:36,249 ! copying octoprint_octolapse/templates/octolapse_profiles_logging.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:38:36,249 ! copying octoprint_octolapse/templates/octolapse_profiles_printer.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:38:36,249 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_automatic.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:38:36,249 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_automatic.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:38:36,249 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_cura.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:38:36,249 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_cura_4.2.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:38:36,249 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_other.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:38:36,249 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_simplify3d.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:38:36,250 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_slic3r_pe.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:38:36,250 ! copying octoprint_octolapse/templates/octolapse_profiles_rendering.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:38:36,250 ! copying octoprint_octolapse/templates/octolapse_profiles_stabilization.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:38:36,250 ! copying octoprint_octolapse/templates/octolapse_profiles_trigger.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:38:36,250 ! copying octoprint_octolapse/templates/octolapse_settings.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:38:36,250 ! copying octoprint_octolapse/templates/octolapse_settings_import.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:38:36,250 ! copying octoprint_octolapse/templates/octolapse_settings_main.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:38:36,251 ! copying octoprint_octolapse/templates/octolapse_snapshot_plan.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:38:36,251 ! copying octoprint_octolapse/templates/octolapse_status_extruder.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:38:36,251 ! copying octoprint_octolapse/templates/octolapse_status_position.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:38:36,251 ! copying octoprint_octolapse/templates/octolapse_status_printer_state.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:38:36,251 ! copying octoprint_octolapse/templates/octolapse_status_snapshot_plan.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:38:36,251 ! copying octoprint_octolapse/templates/octolapse_status_triggers.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:38:36,251 ! copying octoprint_octolapse/templates/octolapse_tab.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:38:36,252 ! copying octoprint_octolapse/templates/octolapse_tab_latest_snapshot.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:38:36,252 ! copying octoprint_octolapse/templates/octolapse_tab_settings_current.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:38:36,252 ! copying octoprint_octolapse/templates/octolapse_tab_settings_current_cameras.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:38:36,252 ! copying octoprint_octolapse/templates/octolapse_tab_snapshot_plan_preview_popup.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:38:36,252 ! copying octoprint_octolapse/templates/octolapse_tab_webcam_settings_popup.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:38:36,252 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams
2023-05-09 13:38:36,252 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams/mjpg_streamer
2023-05-09 13:38:36,253 ! copying octoprint_octolapse/templates/webcams/mjpg_streamer/logitech_c250.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams/mjpg_streamer
2023-05-09 13:38:36,253 ! copying octoprint_octolapse/templates/webcams/mjpg_streamer/logitech_c920.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams/mjpg_streamer
2023-05-09 13:38:36,253 ! copying octoprint_octolapse/templates/webcams/mjpg_streamer/raspi_cam_v2.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams/mjpg_streamer
2023-05-09 13:38:36,253 ! UPDATING build/lib.linux-aarch64-cpython-310/octoprint_octolapse/_version.py
2023-05-09 13:38:36,253 ! set build/lib.linux-aarch64-cpython-310/octoprint_octolapse/_version.py to 'v0.4.2'
2023-05-09 13:38:36,253 ! running build_ext
2023-05-09 13:38:36,254 ! Compiling Octolapse Parser Extension with <distutils.unixccompiler.UnixCCompiler object at 0x76fe83ca30>.
2023-05-09 13:38:36,254 ! building 'GcodePositionProcessor' extension
2023-05-09 13:38:36,254 ! creating build/temp.linux-aarch64-cpython-310
2023-05-09 13:38:36,254 ! creating build/temp.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:38:36,254 ! creating build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:38:36,254 ! creating build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib
2023-05-09 13:38:36,255 ! creating build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:38:36,255 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/extruder.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/extruder.o -O3 -std=c++11
2023-05-09 13:38:36,255 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/gcode_comment_processor.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/gcode_comment_processor.o -O3 -std=c++11
2023-05-09 13:38:36,255 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.cpp: In member function 'void gcode_comment_processor::update_feature_from_section(position&) const':
2023-05-09 13:38:36,255 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.cpp:99:16: warning: enumeration value 'section_type_no_section' not handled in switch [-Wswitch]
2023-05-09 13:38:36,255 ! 99 |         switch (current_section_)
2023-05-09 13:38:36,255 ! |                ^
2023-05-09 13:38:36,256 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/gcode_parser.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/gcode_parser.o -O3 -std=c++11
2023-05-09 13:38:36,256 ! octoprint_octolapse/data/lib/c/gcode_parser.cpp: In member function 'bool gcode_parser::try_parse_gcode(const char*, parsed_command&)':
2023-05-09 13:38:36,256 ! octoprint_octolapse/data/lib/c/gcode_parser.cpp:148:47: warning: suggest parentheses around '&&' within '||' [-Wparentheses]
2023-05-09 13:38:36,256 ! 148 |     else if (cur_char > 32 || cur_char == ' ' && has_seen_character)
2023-05-09 13:38:36,256 ! |                               ~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:38:36,256 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/gcode_position.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/gcode_position.o -O3 -std=c++11
2023-05-09 13:38:36,257 ! octoprint_octolapse/data/lib/c/gcode_position.cpp: In member function 'void gcode_position::add_position(position&)':
2023-05-09 13:38:36,257 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:395:12: warning: operation on '((gcode_position*)this)->gcode_position::cur_pos_' may be undefined [-Wsequence-point]
2023-05-09 13:38:36,257 ! 395 |   cur_pos_ = (++cur_pos_) % NUM_POSITIONS;
2023-05-09 13:38:36,257 ! octoprint_octolapse/data/lib/c/gcode_position.cpp: In member function 'void gcode_position::add_position(parsed_command&)':
2023-05-09 13:38:36,257 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:402:12: warning: operation on '((gcode_position*)this)->gcode_position::cur_pos_' may be undefined [-Wsequence-point]
2023-05-09 13:38:36,257 ! 402 |   cur_pos_ = (++cur_pos_) % NUM_POSITIONS;
2023-05-09 13:38:36,257 ! octoprint_octolapse/data/lib/c/gcode_position.cpp: In member function 'void gcode_position::update(parsed_command&, long int, long int, long int)':
2023-05-09 13:38:36,257 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:659:31: warning: comparison of integer expressions of different signedness: 'const unsigned int' and 'int' [-Wsign-compare]
2023-05-09 13:38:36,258 ! 659 |                 if (increment > p_current_pos->height_increment && increment > 1)
2023-05-09 13:38:36,258 ! |                     ~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:38:36,258 ! octoprint_octolapse/data/lib/c/gcode_position.cpp: In member function 'void gcode_position::process_g10(position*, parsed_command&)':
2023-05-09 13:38:36,258 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:952:10: warning: variable 's' set but not used [-Wunused-but-set-variable]
2023-05-09 13:38:36,258 ! 952 |   double s = 0;
2023-05-09 13:38:36,258 ! |          ^
2023-05-09 13:38:36,258 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:953:8: warning: variable 'has_s' set but not used [-Wunused-but-set-variable]
2023-05-09 13:38:36,259 ! 953 |   bool has_s = false;
2023-05-09 13:38:36,259 ! |        ^~~~~
2023-05-09 13:38:36,259 ! In file included from octoprint_octolapse/data/lib/c/gcode_position.h:29,
2023-05-09 13:38:36,259 ! from octoprint_octolapse/data/lib/c/gcode_position.cpp:22:
2023-05-09 13:38:36,259 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h: At global scope:
2023-05-09 13:38:36,259 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:77:20: warning: 'SLICER_PE_SKIRT_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:38:36,259 ! 77 | static const char* SLICER_PE_SKIRT_COMMENTS[] = {"skirt", "move to first skirt point", NULL};
2023-05-09 13:38:36,259 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:38:36,260 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:73:20: warning: 'SLICER_PE_BRIDGE_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:38:36,260 ! 73 | static const char* SLICER_PE_BRIDGE_COMMENTS[] = {
2023-05-09 13:38:36,260 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:38:36,260 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:72:20: warning: 'SLICER_PE_GAP_FILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:38:36,260 ! 72 | static const char* SLICER_PE_GAP_FILL_COMMENTS[] = {"gap fill", "move to first gap fill point", NULL};
2023-05-09 13:38:36,260 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:38:36,260 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:69:20: warning: 'SLICER_PE_SOLID_INFILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:38:36,261 ! 69 | static const char* SLICER_PE_SOLID_INFILL_COMMENTS[] = {
2023-05-09 13:38:36,261 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:38:36,261 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:68:20: warning: 'SLICER_PE_INFILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:38:36,261 ! 68 | static const char* SLICER_PE_INFILL_COMMENTS[] = {"infill", "move to first infill point", NULL};
2023-05-09 13:38:36,261 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:38:36,261 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:67:20: warning: 'SLICER_PE_UNKNOWN_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:38:36,261 ! 67 | static const char* SLICER_PE_UNKNOWN_PERIMETER_COMMENTS[] = {"perimeter", "move to first perimeter point", NULL};
2023-05-09 13:38:36,262 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:38:36,262 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:64:20: warning: 'SLICER_PE_INNER_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:38:36,262 ! 64 | static const char* SLICER_PE_INNER_PERIMETER_COMMENTS[] = {
2023-05-09 13:38:36,262 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:38:36,262 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:61:20: warning: 'SLICER_PE_OUTER_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:38:36,262 ! 61 | static const char* SLICER_PE_OUTER_PERIMETER_COMMENTS[] = {
2023-05-09 13:38:36,262 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:38:36,263 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/gcode_position_processor.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/gcode_position_processor.o -O3 -std=c++11
2023-05-09 13:38:36,263 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:915: warning: ignoring '#pragma region location_detection_commands' [-Wunknown-pragmas]
2023-05-09 13:38:36,263 ! 915 | #pragma region location_detection_commands
2023-05-09 13:38:36,263 ! |
2023-05-09 13:38:36,263 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:955: warning: ignoring '#pragma endregion Parse' [-Wunknown-pragmas]
2023-05-09 13:38:36,263 ! 955 | #pragma endregion Parse the list of location detection commands
2023-05-09 13:38:36,263 ! |
2023-05-09 13:38:36,263 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1122: warning: ignoring '#pragma region Extract' [-Wunknown-pragmas]
2023-05-09 13:38:36,264 ! 1122 | #pragma region Extract extruder objects
2023-05-09 13:38:36,264 ! |
2023-05-09 13:38:36,264 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1219: warning: ignoring '#pragma endregion Parse' [-Wunknown-pragmas]
2023-05-09 13:38:36,264 ! 1219 | #pragma endregion Parse extruder objects
2023-05-09 13:38:36,264 ! |
2023-05-09 13:38:36,264 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1221: warning: ignoring '#pragma region Extract' [-Wunknown-pragmas]
2023-05-09 13:38:36,264 ! 1221 | #pragma region Extract firmware extruder offsets from the printer settings
2023-05-09 13:38:36,265 ! |
2023-05-09 13:38:36,265 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1334: warning: ignoring '#pragma endregion Extract' [-Wunknown-pragmas]
2023-05-09 13:38:36,265 ! 1334 | #pragma endregion Extract firmware extruder offsets from the printer settings
2023-05-09 13:38:36,265 ! |
2023-05-09 13:38:36,265 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp: In function 'int main(int, char**)':
2023-05-09 13:38:36,265 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:56:27: warning: 'void PyEval_InitThreads()' is deprecated [-Wdeprecated-declarations]
2023-05-09 13:38:36,265 ! 56 |         PyEval_InitThreads();
2023-05-09 13:38:36,266 ! |         ~~~~~~~~~~~~~~~~~~^~
2023-05-09 13:38:36,266 ! In file included from /usr/include/python3.10/Python.h:130,
2023-05-09 13:38:36,266 ! from octoprint_octolapse/data/lib/c/gcode_position_processor.h:30,
2023-05-09 13:38:36,266 ! from octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:23:
2023-05-09 13:38:36,266 ! /usr/include/python3.10/ceval.h:122:37: note: declared here
2023-05-09 13:38:36,266 ! 122 | Py_DEPRECATED(3.9) PyAPI_FUNC(void) PyEval_InitThreads(void);
2023-05-09 13:38:36,266 ! |                                     ^~~~~~~~~~~~~~~~~~
2023-05-09 13:38:36,267 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp: In function 'PyObject* Initialize(PyObject*, PyObject*)':
2023-05-09 13:38:36,267 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:371:19: warning: unused variable 'p_gcode_position' [-Wunused-variable]
2023-05-09 13:38:36,267 ! 371 |   gcode_position* p_gcode_position = NULL;
2023-05-09 13:38:36,267 ! |                   ^~~~~~~~~~~~~~~~
2023-05-09 13:38:36,267 ! In file included from /usr/include/c++/12.2.1/bits/cxxabi_init_exception.h:38,
2023-05-09 13:38:36,267 ! from /usr/include/c++/12.2.1/bits/exception_ptr.h:38,
2023-05-09 13:38:36,267 ! from /usr/include/c++/12.2.1/exception:168,
2023-05-09 13:38:36,267 ! from /usr/include/c++/12.2.1/stdexcept:38,
2023-05-09 13:38:36,268 ! from /usr/include/c++/12.2.1/system_error:41,
2023-05-09 13:38:36,268 ! from /usr/include/c++/12.2.1/bits/ios_base.h:46,
2023-05-09 13:38:36,268 ! from /usr/include/c++/12.2.1/iomanip:40,
2023-05-09 13:38:36,268 ! from octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:24:
2023-05-09 13:38:36,268 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp: In function 'bool ParseStabilizationArgs(PyObject*, stabilization_args*, PyObject**, PyObject**)':
2023-05-09 13:38:36,268 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1406:12: error: converting to 'bool' from 'std::nullptr_t' requires direct-initialization [-fpermissive]
2023-05-09 13:38:36,269 ! 1406 |     return NULL;
2023-05-09 13:38:36,269 ! |            ^~~~
2023-05-09 13:38:36,269 ! In file included from octoprint_octolapse/data/lib/c/gcode_position_processor.h:37:
2023-05-09 13:38:36,269 ! octoprint_octolapse/data/lib/c/stabilization_smart_gcode.h: At global scope:
2023-05-09 13:38:36,269 ! octoprint_octolapse/data/lib/c/stabilization_smart_gcode.h:5:20: warning: 'SMART_GCODE_STABILIZATION' defined but not used [-Wunused-variable]
2023-05-09 13:38:36,269 ! 5 | static const char* SMART_GCODE_STABILIZATION = "smart_gcode";
2023-05-09 13:38:36,269 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:38:36,270 ! In file included from octoprint_octolapse/data/lib/c/gcode_position_processor.h:36:
2023-05-09 13:38:36,270 ! octoprint_octolapse/data/lib/c/stabilization_smart_layer.h:11:20: warning: 'SMART_LAYER_STABILIZATION' defined but not used [-Wunused-variable]
2023-05-09 13:38:36,270 ! 11 | static const char* SMART_LAYER_STABILIZATION = "smart_layer";
2023-05-09 13:38:36,270 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:38:36,270 ! In file included from octoprint_octolapse/data/lib/c/gcode_position_processor.h:35:
2023-05-09 13:38:36,270 ! octoprint_octolapse/data/lib/c/stabilization.h:44:20: warning: 'send_parsed_command_never' defined but not used [-Wunused-variable]
2023-05-09 13:38:36,270 ! 44 | static const char* send_parsed_command_never = "never";
2023-05-09 13:38:36,271 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:38:36,271 ! octoprint_octolapse/data/lib/c/stabilization.h:43:20: warning: 'send_parsed_command_last' defined but not used [-Wunused-variable]
2023-05-09 13:38:36,271 ! 43 | static const char* send_parsed_command_last = "last";
2023-05-09 13:38:36,271 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:38:36,271 ! octoprint_octolapse/data/lib/c/stabilization.h:42:20: warning: 'send_parsed_command_first' defined but not used [-Wunused-variable]
2023-05-09 13:38:36,271 ! 42 | static const char* send_parsed_command_first = "first";
2023-05-09 13:38:36,271 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:38:36,271 ! octoprint_octolapse/data/lib/c/stabilization.h:41:20: warning: 'snapshot_action' defined but not used [-Wunused-variable]
2023-05-09 13:38:36,272 ! 41 | static const char* snapshot_action = "snapshot";
2023-05-09 13:38:36,272 ! |                    ^~~~~~~~~~~~~~~
2023-05-09 13:38:36,272 ! octoprint_octolapse/data/lib/c/stabilization.h:40:20: warning: 'travel_action' defined but not used [-Wunused-variable]
2023-05-09 13:38:36,272 ! 40 | static const char* travel_action = "travel";
2023-05-09 13:38:36,272 ! |                    ^~~~~~~~~~~~~
2023-05-09 13:38:36,272 ! In file included from octoprint_octolapse/data/lib/c/gcode_position.h:29,
2023-05-09 13:38:36,273 ! from octoprint_octolapse/data/lib/c/gcode_position_processor.h:33:
2023-05-09 13:38:36,273 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:77:20: warning: 'SLICER_PE_SKIRT_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:38:36,273 ! 77 | static const char* SLICER_PE_SKIRT_COMMENTS[] = {"skirt", "move to first skirt point", NULL};
2023-05-09 13:38:36,273 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:38:36,273 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:73:20: warning: 'SLICER_PE_BRIDGE_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:38:36,273 ! 73 | static const char* SLICER_PE_BRIDGE_COMMENTS[] = {
2023-05-09 13:38:36,273 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:38:36,273 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:72:20: warning: 'SLICER_PE_GAP_FILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:38:36,274 ! 72 | static const char* SLICER_PE_GAP_FILL_COMMENTS[] = {"gap fill", "move to first gap fill point", NULL};
2023-05-09 13:38:36,274 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:38:36,274 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:69:20: warning: 'SLICER_PE_SOLID_INFILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:38:36,274 ! 69 | static const char* SLICER_PE_SOLID_INFILL_COMMENTS[] = {
2023-05-09 13:38:36,274 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:38:36,275 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:68:20: warning: 'SLICER_PE_INFILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:38:36,275 ! 68 | static const char* SLICER_PE_INFILL_COMMENTS[] = {"infill", "move to first infill point", NULL};
2023-05-09 13:38:36,275 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:38:36,275 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:67:20: warning: 'SLICER_PE_UNKNOWN_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:38:36,275 ! 67 | static const char* SLICER_PE_UNKNOWN_PERIMETER_COMMENTS[] = {"perimeter", "move to first perimeter point", NULL};
2023-05-09 13:38:36,275 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:38:36,275 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:64:20: warning: 'SLICER_PE_INNER_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:38:36,276 ! 64 | static const char* SLICER_PE_INNER_PERIMETER_COMMENTS[] = {
2023-05-09 13:38:36,276 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:38:36,276 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:61:20: warning: 'SLICER_PE_OUTER_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:38:36,276 ! 61 | static const char* SLICER_PE_OUTER_PERIMETER_COMMENTS[] = {
2023-05-09 13:38:36,276 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:38:36,276 ! error: command '/usr/bin/gcc' failed with exit code 1
2023-05-09 13:38:36,277 ! [end of output]
2023-05-09 13:38:36,277 ! 
2023-05-09 13:38:36,277 ! note: This error originates from a subprocess, and is likely not a problem with pip.
2023-05-09 13:38:36,277 ! error: legacy-install-failure
2023-05-09 13:38:36,277 ! 
2023-05-09 13:38:36,277 ! × Encountered error while trying to install package.
2023-05-09 13:38:36,277 ! ╰─> Octolapse
2023-05-09 13:38:36,278 ! 
2023-05-09 13:38:36,278 ! note: This is an issue with the package mentioned above, not pip.
2023-05-09 13:38:36,278 ! hint: See above for output from the failure.
2023-05-09 13:38:37,793 * Looks like the plugin was already installed. Forcing a reinstall.
2023-05-09 13:38:37,801   /usr/bin/python3 -m pip --disable-pip-version-check install file:///tmp/tmpvn209wa3/Octolapse-master.zip --no-cache-dir --ignore-installed --force-reinstall --no-deps
2023-05-09 13:38:45,913 > Processing /tmp/tmpvn209wa3/Octolapse-master.zip
2023-05-09 13:38:48,921 > Preparing metadata (setup.py): started
2023-05-09 13:39:03,592 ! DEPRECATION: Octolapse is being installed using the legacy 'setup.py install' method, because it does not have a 'pyproject.toml' and the 'wheel' package is not installed. pip 23.1 will enforce this behaviour change. A possible replacement is to enable the '--use-pep517' option. Discussion can be found at https://github.com/pypa/pip/issues/8559
2023-05-09 13:39:04,094 > Preparing metadata (setup.py): finished with status 'done'
2023-05-09 13:39:04,094 > Installing collected packages: Octolapse
2023-05-09 13:39:04,095 > Running setup.py install for Octolapse: started
2023-05-09 13:39:57,385 > Running setup.py install for Octolapse: finished with status 'error'
2023-05-09 13:39:57,941 ! error: subprocess-exited-with-error
2023-05-09 13:39:57,941 ! 
2023-05-09 13:39:57,941 ! × Running setup.py install for Octolapse did not run successfully.
2023-05-09 13:39:57,942 ! │ exit code: 1
2023-05-09 13:39:57,942 ! ╰─> [1152 lines of output]
2023-05-09 13:39:57,942 ! likely tags: v0.4.2
2023-05-09 13:39:57,942 ! picking v0.4.2
2023-05-09 13:39:57,942 ! got version from expanded keyword {'version': 'v0.4.2', 'full-revisionid': 'c6c86782cdbfc3590fa4b1bf2e63064eb459b16b', 'dirty': False, 'error': None, 'date': '2023-04-02T10:23:21-0500'}
2023-05-09 13:39:57,943 ! Argon2 passlib backend is not available, not using it for password hashing
2023-05-09 13:39:57,943 ! /tmp/pip-req-build-9utficut/setup.py:58: DeprecationWarning: distutils Version classes are deprecated. Use packaging.version instead.
2023-05-09 13:39:57,943 ! if LooseVersion(octoprint.server.VERSION) < LooseVersion("1.4"):
2023-05-09 13:39:57,943 ! Found packages: {'octoprint_octolapse_setuptools', 'octoprint_octolapse', 'octoprint_octolapse.test'}
2023-05-09 13:39:57,944 ! running install
2023-05-09 13:39:57,944 ! /usr/lib/python3.10/site-packages/setuptools/command/install.py:34: SetuptoolsDeprecationWarning: setup.py install is deprecated. Use build and pip and other standards-based tools.
2023-05-09 13:39:57,945 ! warnings.warn(
2023-05-09 13:39:57,945 ! running build
2023-05-09 13:39:57,945 ! running build_py
2023-05-09 13:39:57,945 ! creating build
2023-05-09 13:39:57,945 ! creating build/lib.linux-aarch64-cpython-310
2023-05-09 13:39:57,945 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:39:57,945 ! copying octoprint_octolapse/snapshot.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:39:57,946 ! copying octoprint_octolapse/log.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:39:57,946 ! copying octoprint_octolapse/__init__.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:39:57,946 ! copying octoprint_octolapse/messenger_worker.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:39:57,946 ! copying octoprint_octolapse/gcode_processor.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:39:57,946 ! copying octoprint_octolapse/gcode_commands.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:39:57,946 ! copying octoprint_octolapse/camera.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:39:57,946 ! copying octoprint_octolapse/position.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:39:57,947 ! copying octoprint_octolapse/stabilization_preprocessing.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:39:57,947 ! copying octoprint_octolapse/utility.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:39:57,947 ! copying octoprint_octolapse/settings_external.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:39:57,947 ! copying octoprint_octolapse/render.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:39:57,947 ! copying octoprint_octolapse/settings_preprocessor.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:39:57,947 ! copying octoprint_octolapse/script.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:39:57,947 ! copying octoprint_octolapse/migration.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:39:57,948 ! copying octoprint_octolapse/_version.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:39:57,948 ! copying octoprint_octolapse/stabilization_gcode.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:39:57,948 ! copying octoprint_octolapse/settings.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:39:57,948 ! copying octoprint_octolapse/error_messages.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:39:57,948 ! copying octoprint_octolapse/trigger.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:39:57,948 ! copying octoprint_octolapse/timelapse.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:39:57,949 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:39:57,949 ! copying octoprint_octolapse/test/test_settings.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:39:57,949 ! copying octoprint_octolapse/test/test_trigger_layer.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:39:57,949 ! copying octoprint_octolapse/test/__init__.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:39:57,949 ! copying octoprint_octolapse/test/test_extruder.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:39:57,949 ! copying octoprint_octolapse/test/test_parsing.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:39:57,949 ! copying octoprint_octolapse/test/test_render.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:39:57,950 ! copying octoprint_octolapse/test/test_timelapse.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:39:57,950 ! copying octoprint_octolapse/test/test_intersection.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:39:57,950 ! copying octoprint_octolapse/test/test_trigger_gcode.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:39:57,950 ! copying octoprint_octolapse/test/testing_utilities.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:39:57,950 ! copying octoprint_octolapse/test/test_octolapseplugin.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:39:57,950 ! copying octoprint_octolapse/test/test_position.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:39:57,950 ! copying octoprint_octolapse/test/test_trigger_timer.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:39:57,951 ! copying octoprint_octolapse/test/test_command.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:39:57,951 ! copying octoprint_octolapse/test/test_settings_slicer.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:39:57,951 ! copying octoprint_octolapse/test/test_utility.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:39:57,951 ! copying octoprint_octolapse/test/test_snapshotGcode.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:39:57,952 ! copying octoprint_octolapse/test/test_migration_version.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:39:57,952 ! copying octoprint_octolapse/test/test_trigger.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:39:57,952 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse_setuptools
2023-05-09 13:39:57,952 ! copying octoprint_octolapse_setuptools/__init__.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse_setuptools
2023-05-09 13:39:57,952 ! running egg_info
2023-05-09 13:39:57,952 ! creating Octolapse.egg-info
2023-05-09 13:39:57,952 ! writing Octolapse.egg-info/PKG-INFO
2023-05-09 13:39:57,953 ! writing dependency_links to Octolapse.egg-info/dependency_links.txt
2023-05-09 13:39:57,953 ! writing entry points to Octolapse.egg-info/entry_points.txt
2023-05-09 13:39:57,953 ! writing requirements to Octolapse.egg-info/requires.txt
2023-05-09 13:39:57,953 ! writing top-level names to Octolapse.egg-info/top_level.txt
2023-05-09 13:39:57,953 ! writing manifest file 'Octolapse.egg-info/SOURCES.txt'
2023-05-09 13:39:57,953 ! reading manifest file 'Octolapse.egg-info/SOURCES.txt'
2023-05-09 13:39:57,953 ! reading manifest template 'MANIFEST.in'
2023-05-09 13:39:57,954 ! warning: no files found matching 'README.md'
2023-05-09 13:39:57,954 ! warning: no files found matching '*' under directory 'octoprint_octolapse/translations'
2023-05-09 13:39:57,954 ! warning: no files found matching '*' under directory 'octoprint_octolapse/data/images'
2023-05-09 13:39:57,954 ! adding license file 'LICENSE'
2023-05-09 13:39:57,954 ! writing manifest file 'Octolapse.egg-info/SOURCES.txt'
2023-05-09 13:39:57,954 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data' as data is deprecated, please list it in `packages`.
2023-05-09 13:39:57,954 ! !!
2023-05-09 13:39:57,954 ! 
2023-05-09 13:39:57,955 ! 
2023-05-09 13:39:57,955 ! ############################
2023-05-09 13:39:57,955 ! # Package would be ignored #
2023-05-09 13:39:57,955 ! ############################
2023-05-09 13:39:57,955 ! Python recognizes 'octoprint_octolapse.data' as an importable package,
2023-05-09 13:39:57,955 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:39:57,955 ! 
2023-05-09 13:39:57,955 ! 'octoprint_octolapse.data' has been automatically added to the distribution only
2023-05-09 13:39:57,956 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:39:57,956 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:39:57,956 ! 
2023-05-09 13:39:57,956 ! Please make sure that 'octoprint_octolapse.data' is included as a package by using
2023-05-09 13:39:57,956 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:39:57,956 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:39:57,956 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:39:57,957 ! 
2023-05-09 13:39:57,957 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:39:57,957 ! documentation page.
2023-05-09 13:39:57,957 ! 
2023-05-09 13:39:57,957 ! 
2023-05-09 13:39:57,957 ! !!
2023-05-09 13:39:57,957 ! 
2023-05-09 13:39:57,958 ! check.warn(importable)
2023-05-09 13:39:57,958 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.Images' as data is deprecated, please list it in `packages`.
2023-05-09 13:39:57,958 ! !!
2023-05-09 13:39:57,958 ! 
2023-05-09 13:39:57,958 ! 
2023-05-09 13:39:57,958 ! ############################
2023-05-09 13:39:57,958 ! # Package would be ignored #
2023-05-09 13:39:57,959 ! ############################
2023-05-09 13:39:57,959 ! Python recognizes 'octoprint_octolapse.data.Images' as an importable package,
2023-05-09 13:39:57,959 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:39:57,959 ! 
2023-05-09 13:39:57,959 ! 'octoprint_octolapse.data.Images' has been automatically added to the distribution only
2023-05-09 13:39:57,959 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:39:57,959 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:39:57,960 ! 
2023-05-09 13:39:57,960 ! Please make sure that 'octoprint_octolapse.data.Images' is included as a package by using
2023-05-09 13:39:57,960 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:39:57,960 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:39:57,960 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:39:57,960 ! 
2023-05-09 13:39:57,960 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:39:57,961 ! documentation page.
2023-05-09 13:39:57,961 ! 
2023-05-09 13:39:57,961 ! 
2023-05-09 13:39:57,961 ! !!
2023-05-09 13:39:57,961 ! 
2023-05-09 13:39:57,961 ! check.warn(importable)
2023-05-09 13:39:57,962 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.fonts.DejaVu' as data is deprecated, please list it in `packages`.
2023-05-09 13:39:57,962 ! !!
2023-05-09 13:39:57,962 ! 
2023-05-09 13:39:57,962 ! 
2023-05-09 13:39:57,962 ! ############################
2023-05-09 13:39:57,962 ! # Package would be ignored #
2023-05-09 13:39:57,963 ! ############################
2023-05-09 13:39:57,963 ! Python recognizes 'octoprint_octolapse.data.fonts.DejaVu' as an importable package,
2023-05-09 13:39:57,963 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:39:57,963 ! 
2023-05-09 13:39:57,963 ! 'octoprint_octolapse.data.fonts.DejaVu' has been automatically added to the distribution only
2023-05-09 13:39:57,963 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:39:57,963 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:39:57,963 ! 
2023-05-09 13:39:57,964 ! Please make sure that 'octoprint_octolapse.data.fonts.DejaVu' is included as a package by using
2023-05-09 13:39:57,964 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:39:57,964 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:39:57,964 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:39:57,964 ! 
2023-05-09 13:39:57,964 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:39:57,964 ! documentation page.
2023-05-09 13:39:57,965 ! 
2023-05-09 13:39:57,965 ! 
2023-05-09 13:39:57,965 ! !!
2023-05-09 13:39:57,965 ! 
2023-05-09 13:39:57,965 ! check.warn(importable)
2023-05-09 13:39:57,965 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.lib.c' as data is deprecated, please list it in `packages`.
2023-05-09 13:39:57,965 ! !!
2023-05-09 13:39:57,965 ! 
2023-05-09 13:39:57,966 ! 
2023-05-09 13:39:57,966 ! ############################
2023-05-09 13:39:57,966 ! # Package would be ignored #
2023-05-09 13:39:57,966 ! ############################
2023-05-09 13:39:57,966 ! Python recognizes 'octoprint_octolapse.data.lib.c' as an importable package,
2023-05-09 13:39:57,966 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:39:57,966 ! 
2023-05-09 13:39:57,966 ! 'octoprint_octolapse.data.lib.c' has been automatically added to the distribution only
2023-05-09 13:39:57,967 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:39:57,967 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:39:57,967 ! 
2023-05-09 13:39:57,967 ! Please make sure that 'octoprint_octolapse.data.lib.c' is included as a package by using
2023-05-09 13:39:57,967 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:39:57,967 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:39:57,967 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:39:57,968 ! 
2023-05-09 13:39:57,968 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:39:57,968 ! documentation page.
2023-05-09 13:39:57,968 ! 
2023-05-09 13:39:57,968 ! 
2023-05-09 13:39:57,968 ! !!
2023-05-09 13:39:57,968 ! 
2023-05-09 13:39:57,969 ! check.warn(importable)
2023-05-09 13:39:57,969 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.scripts.gcode.cura' as data is deprecated, please list it in `packages`.
2023-05-09 13:39:57,969 ! !!
2023-05-09 13:39:57,969 ! 
2023-05-09 13:39:57,969 ! 
2023-05-09 13:39:57,969 ! ############################
2023-05-09 13:39:57,969 ! # Package would be ignored #
2023-05-09 13:39:57,970 ! ############################
2023-05-09 13:39:57,970 ! Python recognizes 'octoprint_octolapse.data.scripts.gcode.cura' as an importable package,
2023-05-09 13:39:57,970 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:39:57,970 ! 
2023-05-09 13:39:57,970 ! 'octoprint_octolapse.data.scripts.gcode.cura' has been automatically added to the distribution only
2023-05-09 13:39:57,970 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:39:57,970 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:39:57,970 ! 
2023-05-09 13:39:57,971 ! Please make sure that 'octoprint_octolapse.data.scripts.gcode.cura' is included as a package by using
2023-05-09 13:39:57,971 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:39:57,971 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:39:57,971 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:39:57,971 ! 
2023-05-09 13:39:57,971 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:39:57,971 ! documentation page.
2023-05-09 13:39:57,972 ! 
2023-05-09 13:39:57,972 ! 
2023-05-09 13:39:57,972 ! !!
2023-05-09 13:39:57,972 ! 
2023-05-09 13:39:57,972 ! check.warn(importable)
2023-05-09 13:39:57,972 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.scripts.linux' as data is deprecated, please list it in `packages`.
2023-05-09 13:39:57,972 ! !!
2023-05-09 13:39:57,972 ! 
2023-05-09 13:39:57,973 ! 
2023-05-09 13:39:57,973 ! ############################
2023-05-09 13:39:57,973 ! # Package would be ignored #
2023-05-09 13:39:57,973 ! ############################
2023-05-09 13:39:57,973 ! Python recognizes 'octoprint_octolapse.data.scripts.linux' as an importable package,
2023-05-09 13:39:57,973 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:39:57,973 ! 
2023-05-09 13:39:57,974 ! 'octoprint_octolapse.data.scripts.linux' has been automatically added to the distribution only
2023-05-09 13:39:57,974 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:39:57,974 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:39:57,974 ! 
2023-05-09 13:39:57,974 ! Please make sure that 'octoprint_octolapse.data.scripts.linux' is included as a package by using
2023-05-09 13:39:57,974 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:39:57,974 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:39:57,974 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:39:57,974 ! 
2023-05-09 13:39:57,975 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:39:57,975 ! documentation page.
2023-05-09 13:39:57,975 ! 
2023-05-09 13:39:57,975 ! 
2023-05-09 13:39:57,975 ! !!
2023-05-09 13:39:57,975 ! 
2023-05-09 13:39:57,975 ! check.warn(importable)
2023-05-09 13:39:57,975 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.scripts.windows' as data is deprecated, please list it in `packages`.
2023-05-09 13:39:57,976 ! !!
2023-05-09 13:39:57,976 ! 
2023-05-09 13:39:57,976 ! 
2023-05-09 13:39:57,976 ! ############################
2023-05-09 13:39:57,976 ! # Package would be ignored #
2023-05-09 13:39:57,976 ! ############################
2023-05-09 13:39:57,976 ! Python recognizes 'octoprint_octolapse.data.scripts.windows' as an importable package,
2023-05-09 13:39:57,976 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:39:57,977 ! 
2023-05-09 13:39:57,977 ! 'octoprint_octolapse.data.scripts.windows' has been automatically added to the distribution only
2023-05-09 13:39:57,977 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:39:57,977 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:39:57,977 ! 
2023-05-09 13:39:57,977 ! Please make sure that 'octoprint_octolapse.data.scripts.windows' is included as a package by using
2023-05-09 13:39:57,977 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:39:57,978 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:39:57,978 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:39:57,978 ! 
2023-05-09 13:39:57,978 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:39:57,978 ! documentation page.
2023-05-09 13:39:57,978 ! 
2023-05-09 13:39:57,978 ! 
2023-05-09 13:39:57,978 ! !!
2023-05-09 13:39:57,979 ! 
2023-05-09 13:39:57,979 ! check.warn(importable)
2023-05-09 13:39:57,979 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.templates' as data is deprecated, please list it in `packages`.
2023-05-09 13:39:57,979 ! !!
2023-05-09 13:39:57,979 ! 
2023-05-09 13:39:57,979 ! 
2023-05-09 13:39:57,979 ! ############################
2023-05-09 13:39:57,980 ! # Package would be ignored #
2023-05-09 13:39:57,980 ! ############################
2023-05-09 13:39:57,980 ! Python recognizes 'octoprint_octolapse.data.templates' as an importable package,
2023-05-09 13:39:57,980 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:39:57,980 ! 
2023-05-09 13:39:57,980 ! 'octoprint_octolapse.data.templates' has been automatically added to the distribution only
2023-05-09 13:39:57,980 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:39:57,981 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:39:57,981 ! 
2023-05-09 13:39:57,981 ! Please make sure that 'octoprint_octolapse.data.templates' is included as a package by using
2023-05-09 13:39:57,981 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:39:57,981 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:39:57,981 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:39:57,981 ! 
2023-05-09 13:39:57,981 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:39:57,982 ! documentation page.
2023-05-09 13:39:57,982 ! 
2023-05-09 13:39:57,982 ! 
2023-05-09 13:39:57,982 ! !!
2023-05-09 13:39:57,982 ! 
2023-05-09 13:39:57,982 ! check.warn(importable)
2023-05-09 13:39:57,983 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.webcam_types' as data is deprecated, please list it in `packages`.
2023-05-09 13:39:57,983 ! !!
2023-05-09 13:39:57,983 ! 
2023-05-09 13:39:57,983 ! 
2023-05-09 13:39:57,983 ! ############################
2023-05-09 13:39:57,983 ! # Package would be ignored #
2023-05-09 13:39:57,983 ! ############################
2023-05-09 13:39:57,983 ! Python recognizes 'octoprint_octolapse.data.webcam_types' as an importable package,
2023-05-09 13:39:57,984 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:39:57,984 ! 
2023-05-09 13:39:57,984 ! 'octoprint_octolapse.data.webcam_types' has been automatically added to the distribution only
2023-05-09 13:39:57,984 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:39:57,984 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:39:57,984 ! 
2023-05-09 13:39:57,984 ! Please make sure that 'octoprint_octolapse.data.webcam_types' is included as a package by using
2023-05-09 13:39:57,985 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:39:57,985 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:39:57,985 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:39:57,985 ! 
2023-05-09 13:39:57,985 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:39:57,985 ! documentation page.
2023-05-09 13:39:57,985 ! 
2023-05-09 13:39:57,986 ! 
2023-05-09 13:39:57,986 ! !!
2023-05-09 13:39:57,986 ! 
2023-05-09 13:39:57,986 ! check.warn(importable)
2023-05-09 13:39:57,986 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.webcam_types.mjpg_streamer' as data is deprecated, please list it in `packages`.
2023-05-09 13:39:57,986 ! !!
2023-05-09 13:39:57,986 ! 
2023-05-09 13:39:57,986 ! 
2023-05-09 13:39:57,987 ! ############################
2023-05-09 13:39:57,987 ! # Package would be ignored #
2023-05-09 13:39:57,987 ! ############################
2023-05-09 13:39:57,987 ! Python recognizes 'octoprint_octolapse.data.webcam_types.mjpg_streamer' as an importable package,
2023-05-09 13:39:57,987 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:39:57,987 ! 
2023-05-09 13:39:57,987 ! 'octoprint_octolapse.data.webcam_types.mjpg_streamer' has been automatically added to the distribution only
2023-05-09 13:39:57,988 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:39:57,988 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:39:57,988 ! 
2023-05-09 13:39:57,988 ! Please make sure that 'octoprint_octolapse.data.webcam_types.mjpg_streamer' is included as a package by using
2023-05-09 13:39:57,988 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:39:57,988 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:39:57,988 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:39:57,988 ! 
2023-05-09 13:39:57,989 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:39:57,989 ! documentation page.
2023-05-09 13:39:57,989 ! 
2023-05-09 13:39:57,989 ! 
2023-05-09 13:39:57,989 ! !!
2023-05-09 13:39:57,989 ! 
2023-05-09 13:39:57,989 ! check.warn(importable)
2023-05-09 13:39:57,989 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.css' as data is deprecated, please list it in `packages`.
2023-05-09 13:39:57,990 ! !!
2023-05-09 13:39:57,990 ! 
2023-05-09 13:39:57,990 ! 
2023-05-09 13:39:57,990 ! ############################
2023-05-09 13:39:57,990 ! # Package would be ignored #
2023-05-09 13:39:57,990 ! ############################
2023-05-09 13:39:57,990 ! Python recognizes 'octoprint_octolapse.static.css' as an importable package,
2023-05-09 13:39:57,990 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:39:57,991 ! 
2023-05-09 13:39:57,991 ! 'octoprint_octolapse.static.css' has been automatically added to the distribution only
2023-05-09 13:39:57,991 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:39:57,991 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:39:57,991 ! 
2023-05-09 13:39:57,991 ! Please make sure that 'octoprint_octolapse.static.css' is included as a package by using
2023-05-09 13:39:57,991 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:39:57,992 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:39:57,992 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:39:57,992 ! 
2023-05-09 13:39:57,992 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:39:57,992 ! documentation page.
2023-05-09 13:39:57,992 ! 
2023-05-09 13:39:57,992 ! 
2023-05-09 13:39:57,993 ! !!
2023-05-09 13:39:57,993 ! 
2023-05-09 13:39:57,993 ! check.warn(importable)
2023-05-09 13:39:57,993 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.docs.help' as data is deprecated, please list it in `packages`.
2023-05-09 13:39:57,993 ! !!
2023-05-09 13:39:57,993 ! 
2023-05-09 13:39:57,993 ! 
2023-05-09 13:39:57,993 ! ############################
2023-05-09 13:39:57,994 ! # Package would be ignored #
2023-05-09 13:39:57,994 ! ############################
2023-05-09 13:39:57,994 ! Python recognizes 'octoprint_octolapse.static.docs.help' as an importable package,
2023-05-09 13:39:57,994 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:39:57,994 ! 
2023-05-09 13:39:57,994 ! 'octoprint_octolapse.static.docs.help' has been automatically added to the distribution only
2023-05-09 13:39:57,994 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:39:57,994 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:39:57,995 ! 
2023-05-09 13:39:57,995 ! Please make sure that 'octoprint_octolapse.static.docs.help' is included as a package by using
2023-05-09 13:39:57,995 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:39:57,995 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:39:57,995 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:39:57,995 ! 
2023-05-09 13:39:57,995 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:39:57,995 ! documentation page.
2023-05-09 13:39:57,996 ! 
2023-05-09 13:39:57,996 ! 
2023-05-09 13:39:57,996 ! !!
2023-05-09 13:39:57,996 ! 
2023-05-09 13:39:57,996 ! check.warn(importable)
2023-05-09 13:39:57,996 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.img' as data is deprecated, please list it in `packages`.
2023-05-09 13:39:57,996 ! !!
2023-05-09 13:39:57,997 ! 
2023-05-09 13:39:57,997 ! 
2023-05-09 13:39:57,997 ! ############################
2023-05-09 13:39:57,997 ! # Package would be ignored #
2023-05-09 13:39:57,997 ! ############################
2023-05-09 13:39:57,997 ! Python recognizes 'octoprint_octolapse.static.img' as an importable package,
2023-05-09 13:39:57,997 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:39:57,997 ! 
2023-05-09 13:39:57,998 ! 'octoprint_octolapse.static.img' has been automatically added to the distribution only
2023-05-09 13:39:57,998 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:39:57,998 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:39:57,998 ! 
2023-05-09 13:39:57,998 ! Please make sure that 'octoprint_octolapse.static.img' is included as a package by using
2023-05-09 13:39:57,998 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:39:57,998 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:39:57,998 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:39:57,999 ! 
2023-05-09 13:39:57,999 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:39:57,999 ! documentation page.
2023-05-09 13:39:57,999 ! 
2023-05-09 13:39:57,999 ! 
2023-05-09 13:39:57,999 ! !!
2023-05-09 13:39:57,999 ! 
2023-05-09 13:39:57,999 ! check.warn(importable)
2023-05-09 13:39:58,000 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.js' as data is deprecated, please list it in `packages`.
2023-05-09 13:39:58,000 ! !!
2023-05-09 13:39:58,000 ! 
2023-05-09 13:39:58,000 ! 
2023-05-09 13:39:58,000 ! ############################
2023-05-09 13:39:58,000 ! # Package would be ignored #
2023-05-09 13:39:58,000 ! ############################
2023-05-09 13:39:58,000 ! Python recognizes 'octoprint_octolapse.static.js' as an importable package,
2023-05-09 13:39:58,001 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:39:58,001 ! 
2023-05-09 13:39:58,001 ! 'octoprint_octolapse.static.js' has been automatically added to the distribution only
2023-05-09 13:39:58,001 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:39:58,001 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:39:58,001 ! 
2023-05-09 13:39:58,001 ! Please make sure that 'octoprint_octolapse.static.js' is included as a package by using
2023-05-09 13:39:58,002 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:39:58,002 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:39:58,002 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:39:58,002 ! 
2023-05-09 13:39:58,002 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:39:58,003 ! documentation page.
2023-05-09 13:39:58,003 ! 
2023-05-09 13:39:58,003 ! 
2023-05-09 13:39:58,003 ! !!
2023-05-09 13:39:58,003 ! 
2023-05-09 13:39:58,003 ! check.warn(importable)
2023-05-09 13:39:58,004 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.js.webcams.mjpg_streamer' as data is deprecated, please list it in `packages`.
2023-05-09 13:39:58,004 ! !!
2023-05-09 13:39:58,004 ! 
2023-05-09 13:39:58,004 ! 
2023-05-09 13:39:58,004 ! ############################
2023-05-09 13:39:58,004 ! # Package would be ignored #
2023-05-09 13:39:58,004 ! ############################
2023-05-09 13:39:58,005 ! Python recognizes 'octoprint_octolapse.static.js.webcams.mjpg_streamer' as an importable package,
2023-05-09 13:39:58,005 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:39:58,005 ! 
2023-05-09 13:39:58,005 ! 'octoprint_octolapse.static.js.webcams.mjpg_streamer' has been automatically added to the distribution only
2023-05-09 13:39:58,005 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:39:58,005 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:39:58,005 ! 
2023-05-09 13:39:58,005 ! Please make sure that 'octoprint_octolapse.static.js.webcams.mjpg_streamer' is included as a package by using
2023-05-09 13:39:58,006 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:39:58,006 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:39:58,006 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:39:58,006 ! 
2023-05-09 13:39:58,006 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:39:58,006 ! documentation page.
2023-05-09 13:39:58,006 ! 
2023-05-09 13:39:58,006 ! 
2023-05-09 13:39:58,006 ! !!
2023-05-09 13:39:58,007 ! 
2023-05-09 13:39:58,007 ! check.warn(importable)
2023-05-09 13:39:58,007 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.templates' as data is deprecated, please list it in `packages`.
2023-05-09 13:39:58,007 ! !!
2023-05-09 13:39:58,007 ! 
2023-05-09 13:39:58,007 ! 
2023-05-09 13:39:58,007 ! ############################
2023-05-09 13:39:58,007 ! # Package would be ignored #
2023-05-09 13:39:58,008 ! ############################
2023-05-09 13:39:58,008 ! Python recognizes 'octoprint_octolapse.templates' as an importable package,
2023-05-09 13:39:58,008 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:39:58,008 ! 
2023-05-09 13:39:58,008 ! 'octoprint_octolapse.templates' has been automatically added to the distribution only
2023-05-09 13:39:58,008 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:39:58,009 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:39:58,009 ! 
2023-05-09 13:39:58,009 ! Please make sure that 'octoprint_octolapse.templates' is included as a package by using
2023-05-09 13:39:58,009 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:39:58,009 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:39:58,009 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:39:58,009 ! 
2023-05-09 13:39:58,009 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:39:58,010 ! documentation page.
2023-05-09 13:39:58,010 ! 
2023-05-09 13:39:58,010 ! 
2023-05-09 13:39:58,010 ! !!
2023-05-09 13:39:58,010 ! 
2023-05-09 13:39:58,010 ! check.warn(importable)
2023-05-09 13:39:58,010 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.templates.webcams.mjpg_streamer' as data is deprecated, please list it in `packages`.
2023-05-09 13:39:58,010 ! !!
2023-05-09 13:39:58,011 ! 
2023-05-09 13:39:58,011 ! 
2023-05-09 13:39:58,011 ! ############################
2023-05-09 13:39:58,011 ! # Package would be ignored #
2023-05-09 13:39:58,011 ! ############################
2023-05-09 13:39:58,011 ! Python recognizes 'octoprint_octolapse.templates.webcams.mjpg_streamer' as an importable package,
2023-05-09 13:39:58,011 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:39:58,011 ! 
2023-05-09 13:39:58,012 ! 'octoprint_octolapse.templates.webcams.mjpg_streamer' has been automatically added to the distribution only
2023-05-09 13:39:58,012 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:39:58,012 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:39:58,012 ! 
2023-05-09 13:39:58,012 ! Please make sure that 'octoprint_octolapse.templates.webcams.mjpg_streamer' is included as a package by using
2023-05-09 13:39:58,012 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:39:58,012 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:39:58,013 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:39:58,013 ! 
2023-05-09 13:39:58,013 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:39:58,013 ! documentation page.
2023-05-09 13:39:58,013 ! 
2023-05-09 13:39:58,013 ! 
2023-05-09 13:39:58,013 ! !!
2023-05-09 13:39:58,013 ! 
2023-05-09 13:39:58,014 ! check.warn(importable)
2023-05-09 13:39:58,014 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:39:58,014 ! copying octoprint_octolapse/data/settings_default_0.3.3rc3.dev0.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:39:58,014 ! copying octoprint_octolapse/data/settings_default_0.4.0.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:39:58,014 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev0.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:39:58,014 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev2.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:39:58,014 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev3.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:39:58,014 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev4.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:39:58,015 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev5.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:39:58,015 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:39:58,015 ! copying octoprint_octolapse/data/settings_default_0.4.0rc2.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:39:58,015 ! copying octoprint_octolapse/data/settings_default_0.4.0rc3.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:39:58,015 ! copying octoprint_octolapse/data/settings_default_current.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:39:58,015 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 13:39:58,015 ! copying octoprint_octolapse/data/Images/no-camera-selected.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 13:39:58,015 ! copying octoprint_octolapse/data/Images/no-image-available.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 13:39:58,016 ! copying octoprint_octolapse/data/Images/no_snapshot.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 13:39:58,016 ! copying octoprint_octolapse/data/Images/test-snapshot-image.jpg -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 13:39:58,016 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/fonts
2023-05-09 13:39:58,016 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/fonts/DejaVu
2023-05-09 13:39:58,016 ! copying octoprint_octolapse/data/fonts/DejaVu/DejaVuSansMono.ttf -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/fonts/DejaVu
2023-05-09 13:39:58,016 ! copying octoprint_octolapse/data/fonts/DejaVu/license.txt -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/fonts/DejaVu
2023-05-09 13:39:58,016 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib
2023-05-09 13:39:58,016 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:39:58,017 ! copying octoprint_octolapse/data/lib/c/extruder.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:39:58,017 ! copying octoprint_octolapse/data/lib/c/extruder.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:39:58,017 ! copying octoprint_octolapse/data/lib/c/gcode_comment_processor.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:39:58,017 ! copying octoprint_octolapse/data/lib/c/gcode_comment_processor.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:39:58,017 ! copying octoprint_octolapse/data/lib/c/gcode_parser.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:39:58,017 ! copying octoprint_octolapse/data/lib/c/gcode_parser.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:39:58,017 ! copying octoprint_octolapse/data/lib/c/gcode_position.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:39:58,017 ! copying octoprint_octolapse/data/lib/c/gcode_position.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:39:58,018 ! copying octoprint_octolapse/data/lib/c/gcode_position_processor.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:39:58,018 ! copying octoprint_octolapse/data/lib/c/gcode_position_processor.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:39:58,018 ! copying octoprint_octolapse/data/lib/c/logging.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:39:58,018 ! copying octoprint_octolapse/data/lib/c/logging.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:39:58,018 ! copying octoprint_octolapse/data/lib/c/parsed_command.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:39:58,018 ! copying octoprint_octolapse/data/lib/c/parsed_command.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:39:58,018 ! copying octoprint_octolapse/data/lib/c/parsed_command_parameter.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:39:58,018 ! copying octoprint_octolapse/data/lib/c/parsed_command_parameter.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:39:58,019 ! copying octoprint_octolapse/data/lib/c/position.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:39:58,019 ! copying octoprint_octolapse/data/lib/c/position.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:39:58,019 ! copying octoprint_octolapse/data/lib/c/python_helpers.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:39:58,019 ! copying octoprint_octolapse/data/lib/c/python_helpers.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:39:58,019 ! copying octoprint_octolapse/data/lib/c/snapshot_plan.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:39:58,019 ! copying octoprint_octolapse/data/lib/c/snapshot_plan.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:39:58,019 ! copying octoprint_octolapse/data/lib/c/snapshot_plan_step.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:39:58,019 ! copying octoprint_octolapse/data/lib/c/snapshot_plan_step.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:39:58,020 ! copying octoprint_octolapse/data/lib/c/stabilization.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:39:58,020 ! copying octoprint_octolapse/data/lib/c/stabilization.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:39:58,020 ! copying octoprint_octolapse/data/lib/c/stabilization_results.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:39:58,020 ! copying octoprint_octolapse/data/lib/c/stabilization_results.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:39:58,020 ! copying octoprint_octolapse/data/lib/c/stabilization_smart_gcode.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:39:58,020 ! copying octoprint_octolapse/data/lib/c/stabilization_smart_gcode.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:39:58,020 ! copying octoprint_octolapse/data/lib/c/stabilization_smart_layer.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:39:58,021 ! copying octoprint_octolapse/data/lib/c/stabilization_smart_layer.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:39:58,021 ! copying octoprint_octolapse/data/lib/c/stabilization_snap_to_print.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:39:58,021 ! copying octoprint_octolapse/data/lib/c/stabilization_snap_to_print.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:39:58,021 ! copying octoprint_octolapse/data/lib/c/trigger_position.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:39:58,021 ! copying octoprint_octolapse/data/lib/c/trigger_position.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:39:58,021 ! copying octoprint_octolapse/data/lib/c/utilities.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:39:58,021 ! copying octoprint_octolapse/data/lib/c/utilities.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:39:58,022 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts
2023-05-09 13:39:58,022 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode
2023-05-09 13:39:58,022 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:39:58,022 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:39:58,022 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_02_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:39:58,023 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_03_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:39:58,023 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_04_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:39:58,023 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_05_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:39:58,023 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_06_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:39:58,023 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_07_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:39:58,023 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_08_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:39:58,023 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:39:58,023 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:39:58,024 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_02_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:39:58,024 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_03_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:39:58,024 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_04_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:39:58,024 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_05_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:39:58,024 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_06_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:39:58,024 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_07_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:39:58,024 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_08_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:39:58,025 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:39:58,025 ! copying octoprint_octolapse/data/scripts/linux/capture_image_leave_on_camera.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:39:58,025 ! copying octoprint_octolapse/data/scripts/linux/download-from-camera-and-rename.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:39:58,025 ! copying octoprint_octolapse/data/scripts/linux/initialize_dslr.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:39:58,025 ! copying octoprint_octolapse/data/scripts/linux/move_snapshots_to_target.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:39:58,025 ! copying octoprint_octolapse/data/scripts/linux/take_snapshot_and_download.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:39:58,025 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/windows
2023-05-09 13:39:58,026 ! copying octoprint_octolapse/data/scripts/windows/take_snapshot_and_download.bat -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/windows
2023-05-09 13:39:58,026 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/templates
2023-05-09 13:39:58,026 ! copying octoprint_octolapse/data/templates/cura_gcode_settings_template.txt -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/templates
2023-05-09 13:39:58,026 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types
2023-05-09 13:39:58,026 ! copying octoprint_octolapse/data/webcam_types/camera_types.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types
2023-05-09 13:39:58,026 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:39:58,026 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/logitech_c250.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:39:58,027 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/logitech_c920.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:39:58,027 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/logitech_c920_2.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:39:58,027 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/logitech_c920_3.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:39:58,027 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/raspi_cam_v2.1.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:39:58,027 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/raspi_cam_v2.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:39:58,027 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static
2023-05-09 13:39:58,027 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/css
2023-05-09 13:39:58,027 ! copying octoprint_octolapse/static/css/jquery.minicolors.css -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/css
2023-05-09 13:39:58,028 ! copying octoprint_octolapse/static/css/jquery.minicolors.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/css
2023-05-09 13:39:58,028 ! copying octoprint_octolapse/static/css/octolapse.css -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/css
2023-05-09 13:39:58,028 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs
2023-05-09 13:39:58,028 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,028 ! copying octoprint_octolapse/static/docs/help/dialog.renderings.in_process.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,028 ! copying octoprint_octolapse/static/docs/help/dialog.renderings.unfinished.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,028 ! copying octoprint_octolapse/static/docs/help/dialog.timelapse_files.snapshot_archive.import.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,028 ! copying octoprint_octolapse/static/docs/help/dialog.timelapse_files.snapshot_archive.tab.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,029 ! copying octoprint_octolapse/static/docs/help/dialog.timelapse_files.timelapse.tab.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,029 ! copying octoprint_octolapse/static/docs/help/error_help_error_not_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,029 ! copying octoprint_octolapse/static/docs/help/error_help_init_automatic_slicer_no_settings_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,029 ! copying octoprint_octolapse/static/docs/help/error_help_init_automatic_slicer_settings_missing.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,029 ! copying octoprint_octolapse/static/docs/help/error_help_init_before_print_start_camera_script_apply_failed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,029 ! copying octoprint_octolapse/static/docs/help/error_help_init_camera_init_test_failed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,029 ! copying octoprint_octolapse/static/docs/help/error_help_init_camera_settings_apply_failed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,029 ! copying octoprint_octolapse/static/docs/help/error_help_init_cant_print_from_sd.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,030 ! copying octoprint_octolapse/static/docs/help/error_help_init_directory_test_failed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,030 ! copying octoprint_octolapse/static/docs/help/error_help_init_ffmpeg_not_found_at_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,030 ! copying octoprint_octolapse/static/docs/help/error_help_init_ffmpeg_path_not_set.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,030 ! copying octoprint_octolapse/static/docs/help/error_help_init_ffmpeg_path_retrieve_exception.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,030 ! copying octoprint_octolapse/static/docs/help/error_help_init_incorrect_octoprint_version.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,030 ! copying octoprint_octolapse/static/docs/help/error_help_init_incorrect_print_start_state.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,030 ! copying octoprint_octolapse/static/docs/help/error_help_init_m114_not_supported.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,030 ! copying octoprint_octolapse/static/docs/help/error_help_init_manual_slicer_settings_missing.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,031 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_current_job_data_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,031 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_current_job_file_data_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,031 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_enabled_cameras.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,031 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_gcode_filepath_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,031 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_printer_profile_exists.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,031 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_printer_profile_selected.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,031 ! copying octoprint_octolapse/static/docs/help/error_help_init_octolapse_is_disabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,032 ! copying octoprint_octolapse/static/docs/help/error_help_init_overlay_font_path_not_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,032 ! copying octoprint_octolapse/static/docs/help/error_help_init_printer_not_configured.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,032 ! copying octoprint_octolapse/static/docs/help/error_help_init_rendering_file_template_invalid.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,032 ! copying octoprint_octolapse/static/docs/help/error_help_init_timelapse_start_exception.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,032 ! copying octoprint_octolapse/static/docs/help/error_help_init_too_few_extruders_defined.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,032 ! copying octoprint_octolapse/static/docs/help/error_help_init_too_few_extruders_offsets_defined.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,032 ! copying octoprint_octolapse/static/docs/help/error_help_init_unable_to_accept_snapshot_plan.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,032 ! copying octoprint_octolapse/static/docs/help/error_help_init_unexpected_exception.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,033 ! copying octoprint_octolapse/static/docs/help/error_help_init_unknown_file_origin.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,033 ! copying octoprint_octolapse/static/docs/help/error_help_not_a_valid_error_dict.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,033 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_axis_mode_e_unknown.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,033 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_axis_mode_xyz_unknown.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,033 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_incorrect_trigger_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,033 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_no_definite_position.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,033 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_no_metric_units.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,033 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_no_snapshot_commands_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,034 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_no_snapshot_plans_returned.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,034 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_printer_not_primed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,034 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_unhandled_exception.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,034 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_unknown_trigger_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,034 ! copying octoprint_octolapse/static/docs/help/error_help_rendering_archive_import_no_files_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,034 ! copying octoprint_octolapse/static/docs/help/error_help_rendering_archive_import_zip_file_corrupt.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,034 ! copying octoprint_octolapse/static/docs/help/error_help_rendering_archive_import_zip_file_too_large.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,034 ! copying octoprint_octolapse/static/docs/help/error_help_settings_slicer_simplify3d_duplicate_toolhead_numbers.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,035 ! copying octoprint_octolapse/static/docs/help/error_help_settings_slicer_simplify3d_extruder_count_mismatch.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,035 ! copying octoprint_octolapse/static/docs/help/error_help_settings_slicer_simplify3d_max_extruder_count_exceeded.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,035 ! copying octoprint_octolapse/static/docs/help/error_help_settings_slicer_simplify3d_unexpected_max_toolhead_number.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,035 ! copying octoprint_octolapse/static/docs/help/error_help_timelapse_cannot_aquire_job_lock.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,035 ! copying octoprint_octolapse/static/docs/help/main_settings.auto_reload_frames.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,035 ! copying octoprint_octolapse/static/docs/help/main_settings.auto_reload_latest_snapshot.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,035 ! copying octoprint_octolapse/static/docs/help/main_settings.automatic_update_interval_days.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,035 ! copying octoprint_octolapse/static/docs/help/main_settings.automatic_updates_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,036 ! copying octoprint_octolapse/static/docs/help/main_settings.cancel_print_on_startup_error.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,036 ! copying octoprint_octolapse/static/docs/help/main_settings.enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,036 ! copying octoprint_octolapse/static/docs/help/main_settings.is_test_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,036 ! copying octoprint_octolapse/static/docs/help/main_settings.preview_snapshot_plan_autoclose.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,036 ! copying octoprint_octolapse/static/docs/help/main_settings.preview_snapshot_plan_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,036 ! copying octoprint_octolapse/static/docs/help/main_settings.preview_snapshot_plans.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,036 ! copying octoprint_octolapse/static/docs/help/main_settings.show_extruder_state_changes.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,037 ! copying octoprint_octolapse/static/docs/help/main_settings.show_navbar_icon.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,037 ! copying octoprint_octolapse/static/docs/help/main_settings.show_navbar_when_not_printing.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,037 ! copying octoprint_octolapse/static/docs/help/main_settings.show_position_changes.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,037 ! copying octoprint_octolapse/static/docs/help/main_settings.show_printer_state_changes.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,037 ! copying octoprint_octolapse/static/docs/help/main_settings.show_snapshot_plan_information.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,037 ! copying octoprint_octolapse/static/docs/help/main_settings.show_trigger_state_changes.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,037 ! copying octoprint_octolapse/static/docs/help/main_settings.snapshot_archive_directory.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,037 ! copying octoprint_octolapse/static/docs/help/main_settings.temporary_directory.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,038 ! copying octoprint_octolapse/static/docs/help/main_settings.timelapse_directory.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,038 ! copying octoprint_octolapse/static/docs/help/profiles.camera.apply_settings_at_startup.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,038 ! copying octoprint_octolapse/static/docs/help/profiles.camera.apply_settings_before_print.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,038 ! copying octoprint_octolapse/static/docs/help/profiles.camera.apply_settings_when_disabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,038 ! copying octoprint_octolapse/static/docs/help/profiles.camera.camera_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,038 ! copying octoprint_octolapse/static/docs/help/profiles.camera.delay.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,038 ! copying octoprint_octolapse/static/docs/help/profiles.camera.edit_cutsom_image_preferences.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,038 ! copying octoprint_octolapse/static/docs/help/profiles.camera.external_camera_snapshot_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,039 ! copying octoprint_octolapse/static/docs/help/profiles.camera.gcode_camera_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,039 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_after_render_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,039 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_after_snapshot_gcode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,039 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_after_snapshot_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,039 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_before_render_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,039 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_before_snapshot_gcode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,039 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_before_snapshot_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,039 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_print_end_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,040 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_print_start_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,040 ! copying octoprint_octolapse/static/docs/help/profiles.camera.snapshot_transpose.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,040 ! copying octoprint_octolapse/static/docs/help/profiles.camera.stream_template.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,040 ! copying octoprint_octolapse/static/docs/help/profiles.camera.timeout_ms.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,040 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.address.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,040 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.enable_custom_image_preferences.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,040 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.ignore_ssl_error.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,041 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.1.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,041 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029518.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,041 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029519.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,041 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029538.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,041 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029670.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,041 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029671.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,041 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029675.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,042 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094849.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,042 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094850.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,042 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094851.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,042 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094856.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,042 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094857.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,042 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094858.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,043 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094860.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,043 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094861.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,043 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094867.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,043 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094868.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,043 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094870.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,043 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094871.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,043 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094872.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,043 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094873.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,044 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094874.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,044 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10291459.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,044 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963776.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,044 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963777.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,044 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963778.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,044 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963788.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,044 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963790.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,044 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963791.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,045 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963795.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,045 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963796.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,045 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963797.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,045 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963800.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,045 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963802.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,045 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963803.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,045 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963804.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,045 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963807.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,046 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963810.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,046 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963818.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,046 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.password.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,046 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.snapshot_request_template.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,046 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.stream_download.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,046 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.username.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,047 ! copying octoprint_octolapse/static/docs/help/profiles.library.is_custom.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,047 ! copying octoprint_octolapse/static/docs/help/profiles.logging.enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,047 ! copying octoprint_octolapse/static/docs/help/profiles.logging.log_all_errors.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,047 ! copying octoprint_octolapse/static/docs/help/profiles.logging.log_to_console.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,047 ! copying octoprint_octolapse/static/docs/help/profiles.logging.logging_level.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,047 ! copying octoprint_octolapse/static/docs/help/profiles.logging.manage_log_files.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,047 ! copying octoprint_octolapse/static/docs/help/profiles.logging.modules_to_log.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,047 ! copying octoprint_octolapse/static/docs/help/profiles.printer.auto_detect_position.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,048 ! copying octoprint_octolapse/static/docs/help/profiles.printer.auto_position_detection_commands.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,048 ! copying octoprint_octolapse/static/docs/help/profiles.printer.automatic_configuration.is_automatic.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,048 ! copying octoprint_octolapse/static/docs/help/profiles.printer.automatic_configuration.make.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,048 ! copying octoprint_octolapse/static/docs/help/profiles.printer.automatic_configuration.model.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,048 ! copying octoprint_octolapse/static/docs/help/profiles.printer.bed_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,048 ! copying octoprint_octolapse/static/docs/help/profiles.printer.custom_bounding_box.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,048 ! copying octoprint_octolapse/static/docs/help/profiles.printer.default_extruder.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,049 ! copying octoprint_octolapse/static/docs/help/profiles.printer.default_firmware_retractions.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,049 ! copying octoprint_octolapse/static/docs/help/profiles.printer.default_firmware_retractions_zhop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,049 ! copying octoprint_octolapse/static/docs/help/profiles.printer.e_axis_default_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,049 ! copying octoprint_octolapse/static/docs/help/profiles.printer.extruder_offsets.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,049 ! copying octoprint_octolapse/static/docs/help/profiles.printer.g90_influences_extruder.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,049 ! copying octoprint_octolapse/static/docs/help/profiles.printer.gocde_axis_compatibility_mode_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,049 ! copying octoprint_octolapse/static/docs/help/profiles.printer.home_axis_gcode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,049 ! copying octoprint_octolapse/static/docs/help/profiles.printer.invert_e.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,050 ! copying octoprint_octolapse/static/docs/help/profiles.printer.invert_x.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,050 ! copying octoprint_octolapse/static/docs/help/profiles.printer.invert_y.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,050 ! copying octoprint_octolapse/static/docs/help/profiles.printer.invert_z.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,050 ! copying octoprint_octolapse/static/docs/help/profiles.printer.minimum_layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,050 ! copying octoprint_octolapse/static/docs/help/profiles.printer.num_extruders.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,050 ! copying octoprint_octolapse/static/docs/help/profiles.printer.origin_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,050 ! copying octoprint_octolapse/static/docs/help/profiles.printer.override_octoprint_profile_settings.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,051 ! copying octoprint_octolapse/static/docs/help/profiles.printer.priming_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,051 ! copying octoprint_octolapse/static/docs/help/profiles.printer.restrict_snapshot_area.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,051 ! copying octoprint_octolapse/static/docs/help/profiles.printer.shared_extruder.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,051 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicer_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,051 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.automatic.continue_on_failure.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,051 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.automatic.disable_automatic_save.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,051 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.4_2.speed_z_hop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,051 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,052 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.max_feedrate_z_override.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,052 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_amount.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,052 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_enable.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,052 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_hop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,052 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_hop_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,052 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_prime_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,052 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_retract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,053 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.smooth_spiralized_contours.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,053 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.speed_travel.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,053 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.axis_speed_display_unit_options.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,053 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.deretract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,053 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,053 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.retract_before_move.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,053 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.retract_length.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,054 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.retract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,054 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.travel_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,054 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.vase_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,055 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.z_hop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,055 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.z_travel_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,055 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.extruder_use_retract.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,055 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,055 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.retraction_distance.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,055 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.retraction_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,056 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.retraction_vertical_lift.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,056 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.vase_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,056 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.x_y_axis_movement_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,056 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.z_axis_movement_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,056 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.deretract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,056 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,056 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.retract_length.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,057 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.retract_lift.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,057 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.retract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,057 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.travel_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,057 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.vase_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,057 ! copying octoprint_octolapse/static/docs/help/profiles.printer.snapshot_command.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,058 ! copying octoprint_octolapse/static/docs/help/profiles.printer.suppress_snapshot_command_always.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,058 ! copying octoprint_octolapse/static/docs/help/profiles.printer.units_default.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,058 ! copying octoprint_octolapse/static/docs/help/profiles.printer.xyz_axes_default_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,058 ! copying octoprint_octolapse/static/docs/help/profiles.printer.zero_based_extruder.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,058 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.archive_snapshots.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,058 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.bitrate.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,058 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.constant_rate_factor.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,058 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.enable_watermark.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,059 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,059 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.fps.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,059 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.fps_calculation_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,059 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.max_fps.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,059 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.min_fps.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,059 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.output_format.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,059 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.output_template.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,060 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_font_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,060 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_font_size.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,060 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_outline_color.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,060 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_outline_width.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,060 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_preview.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,060 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_alignment.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,060 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_color.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,061 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_halign.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,061 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_pos_xy.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,061 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_template.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,061 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_template_current_time.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,061 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_template_time_elapsed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,061 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_valign.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,061 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.post_roll_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,062 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.pre_roll_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,062 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.run_length_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,062 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.thread_count.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,062 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.wait_for_moves_to_finish.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,062 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_fixed_coordinate.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,062 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_fixed_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,062 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_fixed_path_invert_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,062 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_fixed_path_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,063 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_relative.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,063 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_relative_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,063 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_relative_path_invert_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,063 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_relative_path_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,063 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,064 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_fixed_coordinate.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,064 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_fixed_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,064 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_fixed_path_invert_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,064 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_fixed_path_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,064 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_relative.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,064 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_relative_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,065 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_relative_path_invert_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,065 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_relative_path_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,065 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,065 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.calculate_intersections.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,065 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.extruder_state_requirements_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,065 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.layer_trigger_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,065 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.position_restriction_shape.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,066 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.position_restriction_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,066 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.position_restrictions_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,066 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.require_zhop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,066 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.smart_layer_disable_z_lift.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,066 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.smart_layer_snap_to_print_high_quality.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,066 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.smart_layer_snap_to_print_smooth.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,066 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.smart_layer_trigger_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,067 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.timer_trigger_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,067 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.trigger_subtype.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,067 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.trigger_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,067 ! copying octoprint_octolapse/static/docs/help/quality_issues_fast_trigger.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,067 ! copying octoprint_octolapse/static/docs/help/quality_issues_low_quality_snap_to_print.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,067 ! copying octoprint_octolapse/static/docs/help/quality_issues_no_print_features_detected.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,068 ! copying octoprint_octolapse/static/docs/help/settings.import.import_method.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,068 ! copying octoprint_octolapse/static/docs/help/settings.import.import_text.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,068 ! copying octoprint_octolapse/static/docs/help/snapshot_plan_missed_snapshots.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:39:58,068 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/img
2023-05-09 13:39:58,068 ! copying octoprint_octolapse/static/img/watermark.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/img
2023-05-09 13:39:58,068 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:39:58,068 ! copying octoprint_octolapse/static/js/jquery.minicolors.min.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:39:58,069 ! copying octoprint_octolapse/static/js/jquery.validate.min.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:39:58,069 ! copying octoprint_octolapse/static/js/octolapse.dialog.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:39:58,069 ! copying octoprint_octolapse/static/js/octolapse.dialog.renderings.in_process.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:39:58,069 ! copying octoprint_octolapse/static/js/octolapse.dialog.renderings.unfinished.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:39:58,069 ! copying octoprint_octolapse/static/js/octolapse.dialog.timelapse_files.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:39:58,069 ! copying octoprint_octolapse/static/js/octolapse.file_browser.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:39:58,069 ! copying octoprint_octolapse/static/js/octolapse.help.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:39:58,070 ! copying octoprint_octolapse/static/js/octolapse.helpers.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:39:58,070 ! copying octoprint_octolapse/static/js/octolapse.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:39:58,070 ! copying octoprint_octolapse/static/js/octolapse.profiles.camera.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:39:58,070 ! copying octoprint_octolapse/static/js/octolapse.profiles.camera.webcam.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:39:58,070 ! copying octoprint_octolapse/static/js/octolapse.profiles.camera.webcam.mjpg_streamer.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:39:58,070 ! copying octoprint_octolapse/static/js/octolapse.profiles.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:39:58,070 ! copying octoprint_octolapse/static/js/octolapse.profiles.library.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:39:58,071 ! copying octoprint_octolapse/static/js/octolapse.profiles.logging.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:39:58,071 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:39:58,071 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.slicer.cura.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:39:58,072 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.slicer.other.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:39:58,072 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.slicer.simplify_3d.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:39:58,072 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.slicer.slic3r_pe.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:39:58,072 ! copying octoprint_octolapse/static/js/octolapse.profiles.rendering.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:39:58,072 ! copying octoprint_octolapse/static/js/octolapse.profiles.stabilization.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:39:58,072 ! copying octoprint_octolapse/static/js/octolapse.profiles.trigger.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:39:58,072 ! copying octoprint_octolapse/static/js/octolapse.settings.import.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:39:58,073 ! copying octoprint_octolapse/static/js/octolapse.settings.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:39:58,073 ! copying octoprint_octolapse/static/js/octolapse.settings.main.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:39:58,073 ! copying octoprint_octolapse/static/js/octolapse.status.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:39:58,073 ! copying octoprint_octolapse/static/js/octolapse.status.snapshotplan.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:39:58,073 ! copying octoprint_octolapse/static/js/octolapse.status.snapshotplan_preview.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:39:58,073 ! copying octoprint_octolapse/static/js/showdown.min.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:39:58,073 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js/webcams
2023-05-09 13:39:58,074 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js/webcams/mjpg_streamer
2023-05-09 13:39:58,074 ! copying octoprint_octolapse/static/js/webcams/mjpg_streamer/raspi_cam_v2.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js/webcams/mjpg_streamer
2023-05-09 13:39:58,074 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:39:58,074 ! copying octoprint_octolapse/templates/octolapse_dialog.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:39:58,074 ! copying octoprint_octolapse/templates/octolapse_dialog_rendering_in_process.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:39:58,074 ! copying octoprint_octolapse/templates/octolapse_dialog_rendering_unfinished.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:39:58,074 ! copying octoprint_octolapse/templates/octolapse_dialog_timelapse_files.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:39:58,074 ! copying octoprint_octolapse/templates/octolapse_file_browser.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:39:58,075 ! copying octoprint_octolapse/templates/octolapse_helpers.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:39:58,075 ! copying octoprint_octolapse/templates/octolapse_navbar.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:39:58,075 ! copying octoprint_octolapse/templates/octolapse_profile_dialog_add_edit.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:39:58,075 ! copying octoprint_octolapse/templates/octolapse_profiles.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:39:58,075 ! copying octoprint_octolapse/templates/octolapse_profiles_camera.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:39:58,075 ! copying octoprint_octolapse/templates/octolapse_profiles_camera_webcam.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:39:58,075 ! copying octoprint_octolapse/templates/octolapse_profiles_camera_webcam_mjpg_streamer.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:39:58,075 ! copying octoprint_octolapse/templates/octolapse_profiles_library.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:39:58,076 ! copying octoprint_octolapse/templates/octolapse_profiles_logging.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:39:58,076 ! copying octoprint_octolapse/templates/octolapse_profiles_printer.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:39:58,076 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_automatic.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:39:58,076 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_automatic.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:39:58,076 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_cura.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:39:58,076 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_cura_4.2.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:39:58,077 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_other.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:39:58,077 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_simplify3d.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:39:58,077 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_slic3r_pe.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:39:58,077 ! copying octoprint_octolapse/templates/octolapse_profiles_rendering.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:39:58,077 ! copying octoprint_octolapse/templates/octolapse_profiles_stabilization.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:39:58,077 ! copying octoprint_octolapse/templates/octolapse_profiles_trigger.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:39:58,078 ! copying octoprint_octolapse/templates/octolapse_settings.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:39:58,078 ! copying octoprint_octolapse/templates/octolapse_settings_import.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:39:58,078 ! copying octoprint_octolapse/templates/octolapse_settings_main.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:39:58,078 ! copying octoprint_octolapse/templates/octolapse_snapshot_plan.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:39:58,078 ! copying octoprint_octolapse/templates/octolapse_status_extruder.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:39:58,078 ! copying octoprint_octolapse/templates/octolapse_status_position.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:39:58,078 ! copying octoprint_octolapse/templates/octolapse_status_printer_state.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:39:58,078 ! copying octoprint_octolapse/templates/octolapse_status_snapshot_plan.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:39:58,079 ! copying octoprint_octolapse/templates/octolapse_status_triggers.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:39:58,079 ! copying octoprint_octolapse/templates/octolapse_tab.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:39:58,079 ! copying octoprint_octolapse/templates/octolapse_tab_latest_snapshot.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:39:58,079 ! copying octoprint_octolapse/templates/octolapse_tab_settings_current.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:39:58,079 ! copying octoprint_octolapse/templates/octolapse_tab_settings_current_cameras.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:39:58,079 ! copying octoprint_octolapse/templates/octolapse_tab_snapshot_plan_preview_popup.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:39:58,079 ! copying octoprint_octolapse/templates/octolapse_tab_webcam_settings_popup.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:39:58,080 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams
2023-05-09 13:39:58,080 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams/mjpg_streamer
2023-05-09 13:39:58,080 ! copying octoprint_octolapse/templates/webcams/mjpg_streamer/logitech_c250.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams/mjpg_streamer
2023-05-09 13:39:58,080 ! copying octoprint_octolapse/templates/webcams/mjpg_streamer/logitech_c920.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams/mjpg_streamer
2023-05-09 13:39:58,080 ! copying octoprint_octolapse/templates/webcams/mjpg_streamer/raspi_cam_v2.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams/mjpg_streamer
2023-05-09 13:39:58,080 ! UPDATING build/lib.linux-aarch64-cpython-310/octoprint_octolapse/_version.py
2023-05-09 13:39:58,080 ! set build/lib.linux-aarch64-cpython-310/octoprint_octolapse/_version.py to 'v0.4.2'
2023-05-09 13:39:58,081 ! running build_ext
2023-05-09 13:39:58,081 ! Compiling Octolapse Parser Extension with <distutils.unixccompiler.UnixCCompiler object at 0x7762947460>.
2023-05-09 13:39:58,081 ! building 'GcodePositionProcessor' extension
2023-05-09 13:39:58,081 ! creating build/temp.linux-aarch64-cpython-310
2023-05-09 13:39:58,081 ! creating build/temp.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:39:58,081 ! creating build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:39:58,081 ! creating build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib
2023-05-09 13:39:58,082 ! creating build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:39:58,082 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/extruder.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/extruder.o -O3 -std=c++11
2023-05-09 13:39:58,082 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/gcode_comment_processor.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/gcode_comment_processor.o -O3 -std=c++11
2023-05-09 13:39:58,082 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.cpp: In member function 'void gcode_comment_processor::update_feature_from_section(position&) const':
2023-05-09 13:39:58,083 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.cpp:99:16: warning: enumeration value 'section_type_no_section' not handled in switch [-Wswitch]
2023-05-09 13:39:58,083 ! 99 |         switch (current_section_)
2023-05-09 13:39:58,083 ! |                ^
2023-05-09 13:39:58,083 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/gcode_parser.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/gcode_parser.o -O3 -std=c++11
2023-05-09 13:39:58,083 ! octoprint_octolapse/data/lib/c/gcode_parser.cpp: In member function 'bool gcode_parser::try_parse_gcode(const char*, parsed_command&)':
2023-05-09 13:39:58,083 ! octoprint_octolapse/data/lib/c/gcode_parser.cpp:148:47: warning: suggest parentheses around '&&' within '||' [-Wparentheses]
2023-05-09 13:39:58,083 ! 148 |     else if (cur_char > 32 || cur_char == ' ' && has_seen_character)
2023-05-09 13:39:58,084 ! |                               ~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:39:58,084 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/gcode_position.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/gcode_position.o -O3 -std=c++11
2023-05-09 13:39:58,084 ! octoprint_octolapse/data/lib/c/gcode_position.cpp: In member function 'void gcode_position::add_position(position&)':
2023-05-09 13:39:58,086 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:395:12: warning: operation on '((gcode_position*)this)->gcode_position::cur_pos_' may be undefined [-Wsequence-point]
2023-05-09 13:39:58,086 ! 395 |   cur_pos_ = (++cur_pos_) % NUM_POSITIONS;
2023-05-09 13:39:58,086 ! octoprint_octolapse/data/lib/c/gcode_position.cpp: In member function 'void gcode_position::add_position(parsed_command&)':
2023-05-09 13:39:58,086 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:402:12: warning: operation on '((gcode_position*)this)->gcode_position::cur_pos_' may be undefined [-Wsequence-point]
2023-05-09 13:39:58,086 ! 402 |   cur_pos_ = (++cur_pos_) % NUM_POSITIONS;
2023-05-09 13:39:58,086 ! octoprint_octolapse/data/lib/c/gcode_position.cpp: In member function 'void gcode_position::update(parsed_command&, long int, long int, long int)':
2023-05-09 13:39:58,087 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:659:31: warning: comparison of integer expressions of different signedness: 'const unsigned int' and 'int' [-Wsign-compare]
2023-05-09 13:39:58,087 ! 659 |                 if (increment > p_current_pos->height_increment && increment > 1)
2023-05-09 13:39:58,087 ! |                     ~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:39:58,087 ! octoprint_octolapse/data/lib/c/gcode_position.cpp: In member function 'void gcode_position::process_g10(position*, parsed_command&)':
2023-05-09 13:39:58,087 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:952:10: warning: variable 's' set but not used [-Wunused-but-set-variable]
2023-05-09 13:39:58,087 ! 952 |   double s = 0;
2023-05-09 13:39:58,087 ! |          ^
2023-05-09 13:39:58,087 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:953:8: warning: variable 'has_s' set but not used [-Wunused-but-set-variable]
2023-05-09 13:39:58,088 ! 953 |   bool has_s = false;
2023-05-09 13:39:58,088 ! |        ^~~~~
2023-05-09 13:39:58,088 ! In file included from octoprint_octolapse/data/lib/c/gcode_position.h:29,
2023-05-09 13:39:58,089 ! from octoprint_octolapse/data/lib/c/gcode_position.cpp:22:
2023-05-09 13:39:58,089 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h: At global scope:
2023-05-09 13:39:58,089 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:77:20: warning: 'SLICER_PE_SKIRT_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:39:58,089 ! 77 | static const char* SLICER_PE_SKIRT_COMMENTS[] = {"skirt", "move to first skirt point", NULL};
2023-05-09 13:39:58,089 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:39:58,089 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:73:20: warning: 'SLICER_PE_BRIDGE_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:39:58,089 ! 73 | static const char* SLICER_PE_BRIDGE_COMMENTS[] = {
2023-05-09 13:39:58,090 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:39:58,090 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:72:20: warning: 'SLICER_PE_GAP_FILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:39:58,090 ! 72 | static const char* SLICER_PE_GAP_FILL_COMMENTS[] = {"gap fill", "move to first gap fill point", NULL};
2023-05-09 13:39:58,090 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:39:58,090 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:69:20: warning: 'SLICER_PE_SOLID_INFILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:39:58,090 ! 69 | static const char* SLICER_PE_SOLID_INFILL_COMMENTS[] = {
2023-05-09 13:39:58,090 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:39:58,091 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:68:20: warning: 'SLICER_PE_INFILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:39:58,097 ! 68 | static const char* SLICER_PE_INFILL_COMMENTS[] = {"infill", "move to first infill point", NULL};
2023-05-09 13:39:58,097 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:39:58,097 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:67:20: warning: 'SLICER_PE_UNKNOWN_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:39:58,097 ! 67 | static const char* SLICER_PE_UNKNOWN_PERIMETER_COMMENTS[] = {"perimeter", "move to first perimeter point", NULL};
2023-05-09 13:39:58,097 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:39:58,097 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:64:20: warning: 'SLICER_PE_INNER_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:39:58,097 ! 64 | static const char* SLICER_PE_INNER_PERIMETER_COMMENTS[] = {
2023-05-09 13:39:58,098 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:39:58,098 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:61:20: warning: 'SLICER_PE_OUTER_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:39:58,098 ! 61 | static const char* SLICER_PE_OUTER_PERIMETER_COMMENTS[] = {
2023-05-09 13:39:58,098 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:39:58,098 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/gcode_position_processor.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/gcode_position_processor.o -O3 -std=c++11
2023-05-09 13:39:58,098 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:915: warning: ignoring '#pragma region location_detection_commands' [-Wunknown-pragmas]
2023-05-09 13:39:58,098 ! 915 | #pragma region location_detection_commands
2023-05-09 13:39:58,098 ! |
2023-05-09 13:39:58,099 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:955: warning: ignoring '#pragma endregion Parse' [-Wunknown-pragmas]
2023-05-09 13:39:58,099 ! 955 | #pragma endregion Parse the list of location detection commands
2023-05-09 13:39:58,099 ! |
2023-05-09 13:39:58,099 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1122: warning: ignoring '#pragma region Extract' [-Wunknown-pragmas]
2023-05-09 13:39:58,099 ! 1122 | #pragma region Extract extruder objects
2023-05-09 13:39:58,099 ! |
2023-05-09 13:39:58,099 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1219: warning: ignoring '#pragma endregion Parse' [-Wunknown-pragmas]
2023-05-09 13:39:58,099 ! 1219 | #pragma endregion Parse extruder objects
2023-05-09 13:39:58,100 ! |
2023-05-09 13:39:58,100 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1221: warning: ignoring '#pragma region Extract' [-Wunknown-pragmas]
2023-05-09 13:39:58,100 ! 1221 | #pragma region Extract firmware extruder offsets from the printer settings
2023-05-09 13:39:58,100 ! |
2023-05-09 13:39:58,100 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1334: warning: ignoring '#pragma endregion Extract' [-Wunknown-pragmas]
2023-05-09 13:39:58,100 ! 1334 | #pragma endregion Extract firmware extruder offsets from the printer settings
2023-05-09 13:39:58,100 ! |
2023-05-09 13:39:58,100 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp: In function 'int main(int, char**)':
2023-05-09 13:39:58,101 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:56:27: warning: 'void PyEval_InitThreads()' is deprecated [-Wdeprecated-declarations]
2023-05-09 13:39:58,101 ! 56 |         PyEval_InitThreads();
2023-05-09 13:39:58,101 ! |         ~~~~~~~~~~~~~~~~~~^~
2023-05-09 13:39:58,101 ! In file included from /usr/include/python3.10/Python.h:130,
2023-05-09 13:39:58,101 ! from octoprint_octolapse/data/lib/c/gcode_position_processor.h:30,
2023-05-09 13:39:58,101 ! from octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:23:
2023-05-09 13:39:58,101 ! /usr/include/python3.10/ceval.h:122:37: note: declared here
2023-05-09 13:39:58,109 ! 122 | Py_DEPRECATED(3.9) PyAPI_FUNC(void) PyEval_InitThreads(void);
2023-05-09 13:39:58,109 ! |                                     ^~~~~~~~~~~~~~~~~~
2023-05-09 13:39:58,109 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp: In function 'PyObject* Initialize(PyObject*, PyObject*)':
2023-05-09 13:39:58,109 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:371:19: warning: unused variable 'p_gcode_position' [-Wunused-variable]
2023-05-09 13:39:58,109 ! 371 |   gcode_position* p_gcode_position = NULL;
2023-05-09 13:39:58,109 ! |                   ^~~~~~~~~~~~~~~~
2023-05-09 13:39:58,109 ! In file included from /usr/include/c++/12.2.1/bits/cxxabi_init_exception.h:38,
2023-05-09 13:39:58,110 ! from /usr/include/c++/12.2.1/bits/exception_ptr.h:38,
2023-05-09 13:39:58,110 ! from /usr/include/c++/12.2.1/exception:168,
2023-05-09 13:39:58,110 ! from /usr/include/c++/12.2.1/stdexcept:38,
2023-05-09 13:39:58,110 ! from /usr/include/c++/12.2.1/system_error:41,
2023-05-09 13:39:58,110 ! from /usr/include/c++/12.2.1/bits/ios_base.h:46,
2023-05-09 13:39:58,110 ! from /usr/include/c++/12.2.1/iomanip:40,
2023-05-09 13:39:58,110 ! from octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:24:
2023-05-09 13:39:58,110 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp: In function 'bool ParseStabilizationArgs(PyObject*, stabilization_args*, PyObject**, PyObject**)':
2023-05-09 13:39:58,110 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1406:12: error: converting to 'bool' from 'std::nullptr_t' requires direct-initialization [-fpermissive]
2023-05-09 13:39:58,111 ! 1406 |     return NULL;
2023-05-09 13:39:58,111 ! |            ^~~~
2023-05-09 13:39:58,111 ! In file included from octoprint_octolapse/data/lib/c/gcode_position_processor.h:37:
2023-05-09 13:39:58,111 ! octoprint_octolapse/data/lib/c/stabilization_smart_gcode.h: At global scope:
2023-05-09 13:39:58,111 ! octoprint_octolapse/data/lib/c/stabilization_smart_gcode.h:5:20: warning: 'SMART_GCODE_STABILIZATION' defined but not used [-Wunused-variable]
2023-05-09 13:39:58,111 ! 5 | static const char* SMART_GCODE_STABILIZATION = "smart_gcode";
2023-05-09 13:39:58,111 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:39:58,111 ! In file included from octoprint_octolapse/data/lib/c/gcode_position_processor.h:36:
2023-05-09 13:39:58,112 ! octoprint_octolapse/data/lib/c/stabilization_smart_layer.h:11:20: warning: 'SMART_LAYER_STABILIZATION' defined but not used [-Wunused-variable]
2023-05-09 13:39:58,112 ! 11 | static const char* SMART_LAYER_STABILIZATION = "smart_layer";
2023-05-09 13:39:58,112 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:39:58,112 ! In file included from octoprint_octolapse/data/lib/c/gcode_position_processor.h:35:
2023-05-09 13:39:58,112 ! octoprint_octolapse/data/lib/c/stabilization.h:44:20: warning: 'send_parsed_command_never' defined but not used [-Wunused-variable]
2023-05-09 13:39:58,112 ! 44 | static const char* send_parsed_command_never = "never";
2023-05-09 13:39:58,112 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:39:58,112 ! octoprint_octolapse/data/lib/c/stabilization.h:43:20: warning: 'send_parsed_command_last' defined but not used [-Wunused-variable]
2023-05-09 13:39:58,113 ! 43 | static const char* send_parsed_command_last = "last";
2023-05-09 13:39:58,113 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:39:58,113 ! octoprint_octolapse/data/lib/c/stabilization.h:42:20: warning: 'send_parsed_command_first' defined but not used [-Wunused-variable]
2023-05-09 13:39:58,113 ! 42 | static const char* send_parsed_command_first = "first";
2023-05-09 13:39:58,113 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:39:58,113 ! octoprint_octolapse/data/lib/c/stabilization.h:41:20: warning: 'snapshot_action' defined but not used [-Wunused-variable]
2023-05-09 13:39:58,113 ! 41 | static const char* snapshot_action = "snapshot";
2023-05-09 13:39:58,113 ! |                    ^~~~~~~~~~~~~~~
2023-05-09 13:39:58,114 ! octoprint_octolapse/data/lib/c/stabilization.h:40:20: warning: 'travel_action' defined but not used [-Wunused-variable]
2023-05-09 13:39:58,114 ! 40 | static const char* travel_action = "travel";
2023-05-09 13:39:58,114 ! |                    ^~~~~~~~~~~~~
2023-05-09 13:39:58,114 ! In file included from octoprint_octolapse/data/lib/c/gcode_position.h:29,
2023-05-09 13:39:58,114 ! from octoprint_octolapse/data/lib/c/gcode_position_processor.h:33:
2023-05-09 13:39:58,114 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:77:20: warning: 'SLICER_PE_SKIRT_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:39:58,114 ! 77 | static const char* SLICER_PE_SKIRT_COMMENTS[] = {"skirt", "move to first skirt point", NULL};
2023-05-09 13:39:58,114 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:39:58,115 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:73:20: warning: 'SLICER_PE_BRIDGE_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:39:58,115 ! 73 | static const char* SLICER_PE_BRIDGE_COMMENTS[] = {
2023-05-09 13:39:58,115 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:39:58,115 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:72:20: warning: 'SLICER_PE_GAP_FILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:39:58,115 ! 72 | static const char* SLICER_PE_GAP_FILL_COMMENTS[] = {"gap fill", "move to first gap fill point", NULL};
2023-05-09 13:39:58,115 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:39:58,115 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:69:20: warning: 'SLICER_PE_SOLID_INFILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:39:58,115 ! 69 | static const char* SLICER_PE_SOLID_INFILL_COMMENTS[] = {
2023-05-09 13:39:58,115 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:39:58,116 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:68:20: warning: 'SLICER_PE_INFILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:39:58,116 ! 68 | static const char* SLICER_PE_INFILL_COMMENTS[] = {"infill", "move to first infill point", NULL};
2023-05-09 13:39:58,116 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:39:58,116 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:67:20: warning: 'SLICER_PE_UNKNOWN_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:39:58,116 ! 67 | static const char* SLICER_PE_UNKNOWN_PERIMETER_COMMENTS[] = {"perimeter", "move to first perimeter point", NULL};
2023-05-09 13:39:58,116 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:39:58,121 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:64:20: warning: 'SLICER_PE_INNER_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:39:58,121 ! 64 | static const char* SLICER_PE_INNER_PERIMETER_COMMENTS[] = {
2023-05-09 13:39:58,122 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:39:58,122 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:61:20: warning: 'SLICER_PE_OUTER_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:39:58,122 ! 61 | static const char* SLICER_PE_OUTER_PERIMETER_COMMENTS[] = {
2023-05-09 13:39:58,122 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:39:58,122 ! error: command '/usr/bin/gcc' failed with exit code 1
2023-05-09 13:39:58,122 ! [end of output]
2023-05-09 13:39:58,123 ! 
2023-05-09 13:39:58,123 ! note: This error originates from a subprocess, and is likely not a problem with pip.
2023-05-09 13:39:58,123 ! error: legacy-install-failure
2023-05-09 13:39:58,123 ! 
2023-05-09 13:39:58,123 ! × Encountered error while trying to install package.
2023-05-09 13:39:58,123 ! ╰─> Octolapse
2023-05-09 13:39:58,123 ! 
2023-05-09 13:39:58,124 ! note: This is an issue with the package mentioned above, not pip.
2023-05-09 13:39:58,124 ! hint: See above for output from the failure.
2023-05-09 13:43:29,885   /usr/bin/python3 -m pip --disable-pip-version-check install file:///tmp/tmpj0pc59zp/Octolapse-master.zip --no-cache-dir
2023-05-09 13:43:34,192 > Processing /tmp/tmpj0pc59zp/Octolapse-master.zip
2023-05-09 13:43:35,316 > Preparing metadata (setup.py): started
2023-05-09 13:43:46,445 > Preparing metadata (setup.py): finished with status 'done'
2023-05-09 13:43:46,445 > Requirement already satisfied: pillow>=6.2.0<7.0.0 in /usr/lib/python3.10/site-packages (from Octolapse==0.4.2) (9.3.0)
2023-05-09 13:43:46,446 > Requirement already satisfied: sarge in /usr/lib/python3.10/site-packages (from Octolapse==0.4.2) (0.1.6)
2023-05-09 13:43:46,446 > Requirement already satisfied: six in /usr/lib/python3.10/site-packages (from Octolapse==0.4.2) (1.16.0)
2023-05-09 13:43:46,446 > Requirement already satisfied: OctoPrint>1.3.8 in /usr/lib/python3.10/site-packages (from Octolapse==0.4.2) (1.8.7)
2023-05-09 13:43:46,447 > Requirement already satisfied: psutil in /usr/lib/python3.10/site-packages (from Octolapse==0.4.2) (5.9.4)
2023-05-09 13:43:46,447 > Requirement already satisfied: file_read_backwards in /usr/lib/python3.10/site-packages (from Octolapse==0.4.2) (3.0.0)
2023-05-09 13:43:46,447 > Requirement already satisfied: setuptools>=6.0 in /usr/lib/python3.10/site-packages (from Octolapse==0.4.2) (65.6.0)
2023-05-09 13:43:46,447 > Requirement already satisfied: awesome-slugify<1.7,>=1.6.5 in /usr/lib/python3.10/site-packages (from Octolapse==0.4.2) (1.6.5)
2023-05-09 13:43:46,447 > Requirement already satisfied: regex in /usr/lib/python3.10/site-packages (from awesome-slugify<1.7,>=1.6.5->Octolapse==0.4.2) (2022.10.31)
2023-05-09 13:43:46,448 > Requirement already satisfied: Unidecode<0.05,>=0.04.14 in /usr/lib/python3.10/site-packages (from awesome-slugify<1.7,>=1.6.5->Octolapse==0.4.2) (0.4.21)
2023-05-09 13:43:46,448 > Requirement already satisfied: OctoPrint-FileCheck>=2021.2.23 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2021.2.23)
2023-05-09 13:43:46,449 > Requirement already satisfied: OctoPrint-FirmwareCheck>=2021.10.11 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2021.10.11)
2023-05-09 13:43:46,449 > Requirement already satisfied: OctoPrint-PiSupport>=2022.6.13 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2022.6.13)
2023-05-09 13:43:46,449 > Requirement already satisfied: argon2_cffi<22,>=21.3.0 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (21.3.0)
2023-05-09 13:43:46,449 > Requirement already satisfied: cachelib<0.3,>=0.2 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (0.2.0)
2023-05-09 13:43:46,450 > Requirement already satisfied: Click<9,>=8.0.3 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (8.1.3)
2023-05-09 13:43:46,452 > Requirement already satisfied: colorlog<7,>=6 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (6.7.0)
2023-05-09 13:43:46,452 > Requirement already satisfied: emoji<2,>=1.4.2 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.7.0)
2023-05-09 13:43:46,453 > Requirement already satisfied: feedparser<7,>=6.0.8 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (6.0.10)
2023-05-09 13:43:46,453 > Requirement already satisfied: filetype<2,>=1.0.7 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.2.0)
2023-05-09 13:43:46,453 > Requirement already satisfied: Flask-Assets<3,>=2.0 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2.0)
2023-05-09 13:43:46,453 > Requirement already satisfied: Flask-Babel<3,>=2.0 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2.0.0)
2023-05-09 13:43:46,453 > Requirement already satisfied: Flask-Login<0.6,>=0.5 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (0.5.0)
2023-05-09 13:43:46,454 > Requirement already satisfied: Flask-Limiter<3,>=2.6 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2.9.2)
2023-05-09 13:43:46,454 > Requirement already satisfied: flask<2.2,>=2.1 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2.1.3)
2023-05-09 13:43:46,454 > Requirement already satisfied: frozendict<3,>=2.0 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2.3.7)
2023-05-09 13:43:46,454 > Requirement already satisfied: future<1,>=0.18.2 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (0.18.3)
2023-05-09 13:43:46,454 > Requirement already satisfied: markdown<4,>=3.2.2 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (3.4.3)
2023-05-09 13:43:46,454 > Requirement already satisfied: netaddr<0.9,>=0.8 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (0.8.0)
2023-05-09 13:43:46,454 > Requirement already satisfied: netifaces<1,>=0.11 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (0.11.0)
2023-05-09 13:43:46,455 > Requirement already satisfied: passlib<2,>=1.7.4 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.7.4)
2023-05-09 13:43:46,455 > Requirement already satisfied: pathvalidate<3,>=2.4.1 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2.5.2)
2023-05-09 13:43:46,455 > Requirement already satisfied: pkginfo<2,>=1.7.1 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.9.6)
2023-05-09 13:43:46,455 > Requirement already satisfied: pylru<2,>=1.2 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.2.1)
2023-05-09 13:43:46,455 > Requirement already satisfied: pyserial<4,>=3.4 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (3.5)
2023-05-09 13:43:46,455 > Requirement already satisfied: PyYAML<6,>=5.4.1 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (5.4.1)
2023-05-09 13:43:46,455 > Requirement already satisfied: requests<3,>=2.26.0 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2.28.2)
2023-05-09 13:43:46,455 > Requirement already satisfied: semantic_version<3,>=2.8.5 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2.10.0)
2023-05-09 13:43:46,456 > Requirement already satisfied: sentry-sdk<2,>=1.5.7 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.19.1)
2023-05-09 13:43:46,456 > Requirement already satisfied: tornado<7,>=6.0.4 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (6.2)
2023-05-09 13:43:46,456 > Requirement already satisfied: watchdog<2,>=1 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.0.2)
2023-05-09 13:43:46,456 > Requirement already satisfied: websocket-client<2,>=1.2.1 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.5.1)
2023-05-09 13:43:46,456 > Requirement already satisfied: werkzeug<2.1,>=2.0 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2.0.3)
2023-05-09 13:43:46,456 > Requirement already satisfied: wrapt<1.15,>=1.14 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.14.1)
2023-05-09 13:43:46,456 > Requirement already satisfied: zeroconf<0.34,>=0.33 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (0.33.4)
2023-05-09 13:43:46,457 > Requirement already satisfied: zipstream-ng<2.0.0,>=1.3.4 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.5.0)
2023-05-09 13:43:46,457 > Requirement already satisfied: blinker<2,>=1.4 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.6.1)
2023-05-09 13:43:46,457 > Requirement already satisfied: typing-extensions>=4.2 in /usr/lib/python3.10/site-packages (from blinker<2,>=1.4->OctoPrint>1.3.8->Octolapse==0.4.2) (4.5.0)
2023-05-09 13:43:46,457 > Requirement already satisfied: sgmllib3k in /usr/lib/python3.10/site-packages (from feedparser<7,>=6.0.8->OctoPrint>1.3.8->Octolapse==0.4.2) (1.0.0)
2023-05-09 13:43:46,457 > Requirement already satisfied: itsdangerous>=2.0 in /usr/lib/python3.10/site-packages (from flask<2.2,>=2.1->OctoPrint>1.3.8->Octolapse==0.4.2) (2.1.2)
2023-05-09 13:43:46,457 > Requirement already satisfied: Jinja2>=3.0 in /usr/lib/python3.10/site-packages (from flask<2.2,>=2.1->OctoPrint>1.3.8->Octolapse==0.4.2) (3.1.2)
2023-05-09 13:43:46,457 > Requirement already satisfied: webassets>=2.0 in /usr/lib/python3.10/site-packages (from Flask-Assets<3,>=2.0->OctoPrint>1.3.8->Octolapse==0.4.2) (2.0)
2023-05-09 13:43:46,458 > Requirement already satisfied: Babel>=2.3 in /usr/lib/python3.10/site-packages (from Flask-Babel<3,>=2.0->OctoPrint>1.3.8->Octolapse==0.4.2) (2.12.1)
2023-05-09 13:43:46,458 > Requirement already satisfied: pytz in /usr/lib/python3.10/site-packages (from Flask-Babel<3,>=2.0->OctoPrint>1.3.8->Octolapse==0.4.2) (2023.3)
2023-05-09 13:43:46,458 > Requirement already satisfied: ordered-set<5,>4 in /usr/lib/python3.10/site-packages (from Flask-Limiter<3,>=2.6->OctoPrint>1.3.8->Octolapse==0.4.2) (4.1.0)
2023-05-09 13:43:46,458 > Requirement already satisfied: limits>=2.8 in /usr/lib/python3.10/site-packages (from Flask-Limiter<3,>=2.6->OctoPrint>1.3.8->Octolapse==0.4.2) (3.3.1)
2023-05-09 13:43:46,458 > Requirement already satisfied: rich<13,>=12 in /usr/lib/python3.10/site-packages (from Flask-Limiter<3,>=2.6->OctoPrint>1.3.8->Octolapse==0.4.2) (12.6.0)
2023-05-09 13:43:46,458 > Requirement already satisfied: certifi>=2017.4.17 in /usr/lib/python3.10/site-packages (from requests<3,>=2.26.0->OctoPrint>1.3.8->Octolapse==0.4.2) (2022.12.7)
2023-05-09 13:43:46,458 > Requirement already satisfied: urllib3<1.27,>=1.21.1 in /usr/lib/python3.10/site-packages (from requests<3,>=2.26.0->OctoPrint>1.3.8->Octolapse==0.4.2) (1.26.15)
2023-05-09 13:43:46,459 > Requirement already satisfied: idna<4,>=2.5 in /usr/lib/python3.10/site-packages (from requests<3,>=2.26.0->OctoPrint>1.3.8->Octolapse==0.4.2) (3.4)
2023-05-09 13:43:46,459 > Requirement already satisfied: charset-normalizer<4,>=2 in /usr/lib/python3.10/site-packages (from requests<3,>=2.26.0->OctoPrint>1.3.8->Octolapse==0.4.2) (3.1.0)
2023-05-09 13:43:46,459 > Requirement already satisfied: ifaddr>=0.1.7 in /usr/lib/python3.10/site-packages (from zeroconf<0.34,>=0.33->OctoPrint>1.3.8->Octolapse==0.4.2) (0.2.0)
2023-05-09 13:43:46,459 > Requirement already satisfied: MarkupSafe>=2.0 in /usr/lib/python3.10/site-packages (from Jinja2>=3.0->flask<2.2,>=2.1->OctoPrint>1.3.8->Octolapse==0.4.2) (2.1.2)
2023-05-09 13:43:46,459 > Requirement already satisfied: packaging<24,>=21 in /usr/lib/python3.10/site-packages (from limits>=2.8->Flask-Limiter<3,>=2.6->OctoPrint>1.3.8->Octolapse==0.4.2) (23.0)
2023-05-09 13:43:46,459 > Requirement already satisfied: importlib-resources>=1.3 in /usr/lib/python3.10/site-packages (from limits>=2.8->Flask-Limiter<3,>=2.6->OctoPrint>1.3.8->Octolapse==0.4.2) (5.12.0)
2023-05-09 13:43:46,459 > Requirement already satisfied: deprecated>=1.2 in /usr/lib/python3.10/site-packages (from limits>=2.8->Flask-Limiter<3,>=2.6->OctoPrint>1.3.8->Octolapse==0.4.2) (1.2.13)
2023-05-09 13:43:46,459 > Requirement already satisfied: pygments<3.0.0,>=2.6.0 in /usr/lib/python3.10/site-packages (from rich<13,>=12->Flask-Limiter<3,>=2.6->OctoPrint>1.3.8->Octolapse==0.4.2) (2.15.0)
2023-05-09 13:43:46,460 > Requirement already satisfied: commonmark<0.10.0,>=0.9.0 in /usr/lib/python3.10/site-packages (from rich<13,>=12->Flask-Limiter<3,>=2.6->OctoPrint>1.3.8->Octolapse==0.4.2) (0.9.1)
2023-05-09 13:43:47,269 ! DEPRECATION: Octolapse is being installed using the legacy 'setup.py install' method, because it does not have a 'pyproject.toml' and the 'wheel' package is not installed. pip 23.1 will enforce this behaviour change. A possible replacement is to enable the '--use-pep517' option. Discussion can be found at https://github.com/pypa/pip/issues/8559
2023-05-09 13:43:47,779 > Installing collected packages: Octolapse
2023-05-09 13:43:47,779 > Running setup.py install for Octolapse: started
2023-05-09 13:44:27,071 > Running setup.py install for Octolapse: finished with status 'error'
2023-05-09 13:44:27,629 ! error: subprocess-exited-with-error
2023-05-09 13:44:27,631 ! 
2023-05-09 13:44:27,632 ! × Running setup.py install for Octolapse did not run successfully.
2023-05-09 13:44:27,632 ! │ exit code: 1
2023-05-09 13:44:27,633 ! ╰─> [1152 lines of output]
2023-05-09 13:44:27,633 ! likely tags: v0.4.2
2023-05-09 13:44:27,633 ! picking v0.4.2
2023-05-09 13:44:27,634 ! got version from expanded keyword {'version': 'v0.4.2', 'full-revisionid': 'c6c86782cdbfc3590fa4b1bf2e63064eb459b16b', 'dirty': False, 'error': None, 'date': '2023-04-02T10:23:21-0500'}
2023-05-09 13:44:27,634 ! Argon2 passlib backend is not available, not using it for password hashing
2023-05-09 13:44:27,635 ! /tmp/pip-req-build-3ysiv8jz/setup.py:58: DeprecationWarning: distutils Version classes are deprecated. Use packaging.version instead.
2023-05-09 13:44:27,635 ! if LooseVersion(octoprint.server.VERSION) < LooseVersion("1.4"):
2023-05-09 13:44:27,636 ! Found packages: {'octoprint_octolapse_setuptools', 'octoprint_octolapse', 'octoprint_octolapse.test'}
2023-05-09 13:44:27,636 ! running install
2023-05-09 13:44:27,636 ! /usr/lib/python3.10/site-packages/setuptools/command/install.py:34: SetuptoolsDeprecationWarning: setup.py install is deprecated. Use build and pip and other standards-based tools.
2023-05-09 13:44:27,637 ! warnings.warn(
2023-05-09 13:44:27,637 ! running build
2023-05-09 13:44:27,638 ! running build_py
2023-05-09 13:44:27,638 ! creating build
2023-05-09 13:44:27,638 ! creating build/lib.linux-aarch64-cpython-310
2023-05-09 13:44:27,638 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:44:27,638 ! copying octoprint_octolapse/snapshot.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:44:27,639 ! copying octoprint_octolapse/log.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:44:27,639 ! copying octoprint_octolapse/__init__.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:44:27,639 ! copying octoprint_octolapse/messenger_worker.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:44:27,639 ! copying octoprint_octolapse/gcode_processor.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:44:27,639 ! copying octoprint_octolapse/gcode_commands.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:44:27,639 ! copying octoprint_octolapse/camera.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:44:27,640 ! copying octoprint_octolapse/position.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:44:27,640 ! copying octoprint_octolapse/stabilization_preprocessing.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:44:27,640 ! copying octoprint_octolapse/utility.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:44:27,640 ! copying octoprint_octolapse/settings_external.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:44:27,640 ! copying octoprint_octolapse/render.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:44:27,641 ! copying octoprint_octolapse/settings_preprocessor.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:44:27,641 ! copying octoprint_octolapse/script.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:44:27,641 ! copying octoprint_octolapse/migration.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:44:27,641 ! copying octoprint_octolapse/_version.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:44:27,642 ! copying octoprint_octolapse/stabilization_gcode.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:44:27,642 ! copying octoprint_octolapse/settings.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:44:27,642 ! copying octoprint_octolapse/error_messages.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:44:27,643 ! copying octoprint_octolapse/trigger.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:44:27,643 ! copying octoprint_octolapse/timelapse.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:44:27,643 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse_setuptools
2023-05-09 13:44:27,643 ! copying octoprint_octolapse_setuptools/__init__.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse_setuptools
2023-05-09 13:44:27,643 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:44:27,643 ! copying octoprint_octolapse/test/test_settings.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:44:27,644 ! copying octoprint_octolapse/test/test_trigger_layer.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:44:27,644 ! copying octoprint_octolapse/test/__init__.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:44:27,644 ! copying octoprint_octolapse/test/test_extruder.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:44:27,644 ! copying octoprint_octolapse/test/test_parsing.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:44:27,644 ! copying octoprint_octolapse/test/test_render.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:44:27,644 ! copying octoprint_octolapse/test/test_timelapse.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:44:27,645 ! copying octoprint_octolapse/test/test_intersection.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:44:27,645 ! copying octoprint_octolapse/test/test_trigger_gcode.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:44:27,645 ! copying octoprint_octolapse/test/testing_utilities.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:44:27,645 ! copying octoprint_octolapse/test/test_octolapseplugin.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:44:27,645 ! copying octoprint_octolapse/test/test_position.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:44:27,645 ! copying octoprint_octolapse/test/test_trigger_timer.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:44:27,646 ! copying octoprint_octolapse/test/test_command.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:44:27,646 ! copying octoprint_octolapse/test/test_settings_slicer.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:44:27,646 ! copying octoprint_octolapse/test/test_utility.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:44:27,646 ! copying octoprint_octolapse/test/test_snapshotGcode.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:44:27,646 ! copying octoprint_octolapse/test/test_migration_version.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:44:27,646 ! copying octoprint_octolapse/test/test_trigger.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:44:27,646 ! running egg_info
2023-05-09 13:44:27,647 ! creating Octolapse.egg-info
2023-05-09 13:44:27,647 ! writing Octolapse.egg-info/PKG-INFO
2023-05-09 13:44:27,647 ! writing dependency_links to Octolapse.egg-info/dependency_links.txt
2023-05-09 13:44:27,647 ! writing entry points to Octolapse.egg-info/entry_points.txt
2023-05-09 13:44:27,647 ! writing requirements to Octolapse.egg-info/requires.txt
2023-05-09 13:44:27,648 ! writing top-level names to Octolapse.egg-info/top_level.txt
2023-05-09 13:44:27,648 ! writing manifest file 'Octolapse.egg-info/SOURCES.txt'
2023-05-09 13:44:27,648 ! reading manifest file 'Octolapse.egg-info/SOURCES.txt'
2023-05-09 13:44:27,648 ! reading manifest template 'MANIFEST.in'
2023-05-09 13:44:27,648 ! warning: no files found matching 'README.md'
2023-05-09 13:44:27,648 ! warning: no files found matching '*' under directory 'octoprint_octolapse/translations'
2023-05-09 13:44:27,648 ! warning: no files found matching '*' under directory 'octoprint_octolapse/data/images'
2023-05-09 13:44:27,649 ! adding license file 'LICENSE'
2023-05-09 13:44:27,649 ! writing manifest file 'Octolapse.egg-info/SOURCES.txt'
2023-05-09 13:44:27,649 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data' as data is deprecated, please list it in `packages`.
2023-05-09 13:44:27,649 ! !!
2023-05-09 13:44:27,649 ! 
2023-05-09 13:44:27,650 ! 
2023-05-09 13:44:27,651 ! ############################
2023-05-09 13:44:27,651 ! # Package would be ignored #
2023-05-09 13:44:27,651 ! ############################
2023-05-09 13:44:27,651 ! Python recognizes 'octoprint_octolapse.data' as an importable package,
2023-05-09 13:44:27,651 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:44:27,651 ! 
2023-05-09 13:44:27,651 ! 'octoprint_octolapse.data' has been automatically added to the distribution only
2023-05-09 13:44:27,652 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:44:27,652 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:44:27,652 ! 
2023-05-09 13:44:27,652 ! Please make sure that 'octoprint_octolapse.data' is included as a package by using
2023-05-09 13:44:27,652 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:44:27,652 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:44:27,653 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:44:27,653 ! 
2023-05-09 13:44:27,653 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:44:27,653 ! documentation page.
2023-05-09 13:44:27,653 ! 
2023-05-09 13:44:27,653 ! 
2023-05-09 13:44:27,654 ! !!
2023-05-09 13:44:27,654 ! 
2023-05-09 13:44:27,654 ! check.warn(importable)
2023-05-09 13:44:27,654 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.Images' as data is deprecated, please list it in `packages`.
2023-05-09 13:44:27,654 ! !!
2023-05-09 13:44:27,654 ! 
2023-05-09 13:44:27,655 ! 
2023-05-09 13:44:27,655 ! ############################
2023-05-09 13:44:27,655 ! # Package would be ignored #
2023-05-09 13:44:27,655 ! ############################
2023-05-09 13:44:27,655 ! Python recognizes 'octoprint_octolapse.data.Images' as an importable package,
2023-05-09 13:44:27,656 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:44:27,656 ! 
2023-05-09 13:44:27,656 ! 'octoprint_octolapse.data.Images' has been automatically added to the distribution only
2023-05-09 13:44:27,656 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:44:27,657 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:44:27,657 ! 
2023-05-09 13:44:27,657 ! Please make sure that 'octoprint_octolapse.data.Images' is included as a package by using
2023-05-09 13:44:27,657 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:44:27,657 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:44:27,657 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:44:27,658 ! 
2023-05-09 13:44:27,658 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:44:27,658 ! documentation page.
2023-05-09 13:44:27,658 ! 
2023-05-09 13:44:27,658 ! 
2023-05-09 13:44:27,658 ! !!
2023-05-09 13:44:27,659 ! 
2023-05-09 13:44:27,659 ! check.warn(importable)
2023-05-09 13:44:27,659 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.fonts.DejaVu' as data is deprecated, please list it in `packages`.
2023-05-09 13:44:27,659 ! !!
2023-05-09 13:44:27,659 ! 
2023-05-09 13:44:27,659 ! 
2023-05-09 13:44:27,660 ! ############################
2023-05-09 13:44:27,660 ! # Package would be ignored #
2023-05-09 13:44:27,660 ! ############################
2023-05-09 13:44:27,660 ! Python recognizes 'octoprint_octolapse.data.fonts.DejaVu' as an importable package,
2023-05-09 13:44:27,660 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:44:27,660 ! 
2023-05-09 13:44:27,661 ! 'octoprint_octolapse.data.fonts.DejaVu' has been automatically added to the distribution only
2023-05-09 13:44:27,661 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:44:27,661 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:44:27,661 ! 
2023-05-09 13:44:27,661 ! Please make sure that 'octoprint_octolapse.data.fonts.DejaVu' is included as a package by using
2023-05-09 13:44:27,662 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:44:27,662 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:44:27,662 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:44:27,662 ! 
2023-05-09 13:44:27,662 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:44:27,663 ! documentation page.
2023-05-09 13:44:27,663 ! 
2023-05-09 13:44:27,663 ! 
2023-05-09 13:44:27,663 ! !!
2023-05-09 13:44:27,663 ! 
2023-05-09 13:44:27,663 ! check.warn(importable)
2023-05-09 13:44:27,663 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.lib.c' as data is deprecated, please list it in `packages`.
2023-05-09 13:44:27,664 ! !!
2023-05-09 13:44:27,664 ! 
2023-05-09 13:44:27,664 ! 
2023-05-09 13:44:27,664 ! ############################
2023-05-09 13:44:27,664 ! # Package would be ignored #
2023-05-09 13:44:27,664 ! ############################
2023-05-09 13:44:27,665 ! Python recognizes 'octoprint_octolapse.data.lib.c' as an importable package,
2023-05-09 13:44:27,665 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:44:27,665 ! 
2023-05-09 13:44:27,665 ! 'octoprint_octolapse.data.lib.c' has been automatically added to the distribution only
2023-05-09 13:44:27,665 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:44:27,665 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:44:27,666 ! 
2023-05-09 13:44:27,666 ! Please make sure that 'octoprint_octolapse.data.lib.c' is included as a package by using
2023-05-09 13:44:27,666 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:44:27,666 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:44:27,666 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:44:27,666 ! 
2023-05-09 13:44:27,666 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:44:27,667 ! documentation page.
2023-05-09 13:44:27,667 ! 
2023-05-09 13:44:27,667 ! 
2023-05-09 13:44:27,667 ! !!
2023-05-09 13:44:27,667 ! 
2023-05-09 13:44:27,667 ! check.warn(importable)
2023-05-09 13:44:27,668 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.scripts.gcode.cura' as data is deprecated, please list it in `packages`.
2023-05-09 13:44:27,668 ! !!
2023-05-09 13:44:27,668 ! 
2023-05-09 13:44:27,668 ! 
2023-05-09 13:44:27,668 ! ############################
2023-05-09 13:44:27,668 ! # Package would be ignored #
2023-05-09 13:44:27,669 ! ############################
2023-05-09 13:44:27,669 ! Python recognizes 'octoprint_octolapse.data.scripts.gcode.cura' as an importable package,
2023-05-09 13:44:27,669 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:44:27,669 ! 
2023-05-09 13:44:27,669 ! 'octoprint_octolapse.data.scripts.gcode.cura' has been automatically added to the distribution only
2023-05-09 13:44:27,670 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:44:27,670 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:44:27,671 ! 
2023-05-09 13:44:27,671 ! Please make sure that 'octoprint_octolapse.data.scripts.gcode.cura' is included as a package by using
2023-05-09 13:44:27,671 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:44:27,671 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:44:27,671 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:44:27,672 ! 
2023-05-09 13:44:27,672 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:44:27,672 ! documentation page.
2023-05-09 13:44:27,672 ! 
2023-05-09 13:44:27,672 ! 
2023-05-09 13:44:27,673 ! !!
2023-05-09 13:44:27,673 ! 
2023-05-09 13:44:27,673 ! check.warn(importable)
2023-05-09 13:44:27,673 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.scripts.linux' as data is deprecated, please list it in `packages`.
2023-05-09 13:44:27,673 ! !!
2023-05-09 13:44:27,673 ! 
2023-05-09 13:44:27,674 ! 
2023-05-09 13:44:27,674 ! ############################
2023-05-09 13:44:27,674 ! # Package would be ignored #
2023-05-09 13:44:27,674 ! ############################
2023-05-09 13:44:27,674 ! Python recognizes 'octoprint_octolapse.data.scripts.linux' as an importable package,
2023-05-09 13:44:27,674 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:44:27,674 ! 
2023-05-09 13:44:27,675 ! 'octoprint_octolapse.data.scripts.linux' has been automatically added to the distribution only
2023-05-09 13:44:27,675 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:44:27,675 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:44:27,675 ! 
2023-05-09 13:44:27,675 ! Please make sure that 'octoprint_octolapse.data.scripts.linux' is included as a package by using
2023-05-09 13:44:27,675 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:44:27,675 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:44:27,676 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:44:27,676 ! 
2023-05-09 13:44:27,676 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:44:27,676 ! documentation page.
2023-05-09 13:44:27,676 ! 
2023-05-09 13:44:27,676 ! 
2023-05-09 13:44:27,677 ! !!
2023-05-09 13:44:27,677 ! 
2023-05-09 13:44:27,677 ! check.warn(importable)
2023-05-09 13:44:27,677 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.scripts.windows' as data is deprecated, please list it in `packages`.
2023-05-09 13:44:27,677 ! !!
2023-05-09 13:44:27,677 ! 
2023-05-09 13:44:27,677 ! 
2023-05-09 13:44:27,678 ! ############################
2023-05-09 13:44:27,678 ! # Package would be ignored #
2023-05-09 13:44:27,678 ! ############################
2023-05-09 13:44:27,678 ! Python recognizes 'octoprint_octolapse.data.scripts.windows' as an importable package,
2023-05-09 13:44:27,678 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:44:27,678 ! 
2023-05-09 13:44:27,679 ! 'octoprint_octolapse.data.scripts.windows' has been automatically added to the distribution only
2023-05-09 13:44:27,679 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:44:27,679 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:44:27,679 ! 
2023-05-09 13:44:27,679 ! Please make sure that 'octoprint_octolapse.data.scripts.windows' is included as a package by using
2023-05-09 13:44:27,679 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:44:27,679 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:44:27,680 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:44:27,680 ! 
2023-05-09 13:44:27,680 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:44:27,680 ! documentation page.
2023-05-09 13:44:27,680 ! 
2023-05-09 13:44:27,680 ! 
2023-05-09 13:44:27,681 ! !!
2023-05-09 13:44:27,681 ! 
2023-05-09 13:44:27,681 ! check.warn(importable)
2023-05-09 13:44:27,681 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.templates' as data is deprecated, please list it in `packages`.
2023-05-09 13:44:27,681 ! !!
2023-05-09 13:44:27,681 ! 
2023-05-09 13:44:27,681 ! 
2023-05-09 13:44:27,682 ! ############################
2023-05-09 13:44:27,682 ! # Package would be ignored #
2023-05-09 13:44:27,682 ! ############################
2023-05-09 13:44:27,682 ! Python recognizes 'octoprint_octolapse.data.templates' as an importable package,
2023-05-09 13:44:27,682 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:44:27,682 ! 
2023-05-09 13:44:27,683 ! 'octoprint_octolapse.data.templates' has been automatically added to the distribution only
2023-05-09 13:44:27,683 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:44:27,683 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:44:27,683 ! 
2023-05-09 13:44:27,683 ! Please make sure that 'octoprint_octolapse.data.templates' is included as a package by using
2023-05-09 13:44:27,684 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:44:27,684 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:44:27,684 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:44:27,684 ! 
2023-05-09 13:44:27,684 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:44:27,684 ! documentation page.
2023-05-09 13:44:27,685 ! 
2023-05-09 13:44:27,685 ! 
2023-05-09 13:44:27,685 ! !!
2023-05-09 13:44:27,685 ! 
2023-05-09 13:44:27,685 ! check.warn(importable)
2023-05-09 13:44:27,685 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.webcam_types' as data is deprecated, please list it in `packages`.
2023-05-09 13:44:27,685 ! !!
2023-05-09 13:44:27,686 ! 
2023-05-09 13:44:27,686 ! 
2023-05-09 13:44:27,686 ! ############################
2023-05-09 13:44:27,686 ! # Package would be ignored #
2023-05-09 13:44:27,686 ! ############################
2023-05-09 13:44:27,686 ! Python recognizes 'octoprint_octolapse.data.webcam_types' as an importable package,
2023-05-09 13:44:27,686 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:44:27,687 ! 
2023-05-09 13:44:27,687 ! 'octoprint_octolapse.data.webcam_types' has been automatically added to the distribution only
2023-05-09 13:44:27,687 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:44:27,687 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:44:27,687 ! 
2023-05-09 13:44:27,687 ! Please make sure that 'octoprint_octolapse.data.webcam_types' is included as a package by using
2023-05-09 13:44:27,688 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:44:27,688 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:44:27,688 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:44:27,688 ! 
2023-05-09 13:44:27,688 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:44:27,688 ! documentation page.
2023-05-09 13:44:27,689 ! 
2023-05-09 13:44:27,689 ! 
2023-05-09 13:44:27,689 ! !!
2023-05-09 13:44:27,689 ! 
2023-05-09 13:44:27,689 ! check.warn(importable)
2023-05-09 13:44:27,689 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.webcam_types.mjpg_streamer' as data is deprecated, please list it in `packages`.
2023-05-09 13:44:27,689 ! !!
2023-05-09 13:44:27,690 ! 
2023-05-09 13:44:27,690 ! 
2023-05-09 13:44:27,690 ! ############################
2023-05-09 13:44:27,690 ! # Package would be ignored #
2023-05-09 13:44:27,690 ! ############################
2023-05-09 13:44:27,690 ! Python recognizes 'octoprint_octolapse.data.webcam_types.mjpg_streamer' as an importable package,
2023-05-09 13:44:27,690 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:44:27,691 ! 
2023-05-09 13:44:27,691 ! 'octoprint_octolapse.data.webcam_types.mjpg_streamer' has been automatically added to the distribution only
2023-05-09 13:44:27,691 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:44:27,691 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:44:27,691 ! 
2023-05-09 13:44:27,691 ! Please make sure that 'octoprint_octolapse.data.webcam_types.mjpg_streamer' is included as a package by using
2023-05-09 13:44:27,692 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:44:27,692 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:44:27,692 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:44:27,692 ! 
2023-05-09 13:44:27,692 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:44:27,693 ! documentation page.
2023-05-09 13:44:27,693 ! 
2023-05-09 13:44:27,693 ! 
2023-05-09 13:44:27,693 ! !!
2023-05-09 13:44:27,694 ! 
2023-05-09 13:44:27,694 ! check.warn(importable)
2023-05-09 13:44:27,694 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.css' as data is deprecated, please list it in `packages`.
2023-05-09 13:44:27,695 ! !!
2023-05-09 13:44:27,695 ! 
2023-05-09 13:44:27,695 ! 
2023-05-09 13:44:27,695 ! ############################
2023-05-09 13:44:27,695 ! # Package would be ignored #
2023-05-09 13:44:27,696 ! ############################
2023-05-09 13:44:27,696 ! Python recognizes 'octoprint_octolapse.static.css' as an importable package,
2023-05-09 13:44:27,696 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:44:27,696 ! 
2023-05-09 13:44:27,696 ! 'octoprint_octolapse.static.css' has been automatically added to the distribution only
2023-05-09 13:44:27,696 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:44:27,697 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:44:27,697 ! 
2023-05-09 13:44:27,697 ! Please make sure that 'octoprint_octolapse.static.css' is included as a package by using
2023-05-09 13:44:27,697 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:44:27,697 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:44:27,697 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:44:27,697 ! 
2023-05-09 13:44:27,698 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:44:27,698 ! documentation page.
2023-05-09 13:44:27,698 ! 
2023-05-09 13:44:27,698 ! 
2023-05-09 13:44:27,698 ! !!
2023-05-09 13:44:27,698 ! 
2023-05-09 13:44:27,698 ! check.warn(importable)
2023-05-09 13:44:27,699 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.docs.help' as data is deprecated, please list it in `packages`.
2023-05-09 13:44:27,699 ! !!
2023-05-09 13:44:27,699 ! 
2023-05-09 13:44:27,699 ! 
2023-05-09 13:44:27,699 ! ############################
2023-05-09 13:44:27,699 ! # Package would be ignored #
2023-05-09 13:44:27,700 ! ############################
2023-05-09 13:44:27,700 ! Python recognizes 'octoprint_octolapse.static.docs.help' as an importable package,
2023-05-09 13:44:27,700 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:44:27,700 ! 
2023-05-09 13:44:27,700 ! 'octoprint_octolapse.static.docs.help' has been automatically added to the distribution only
2023-05-09 13:44:27,700 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:44:27,700 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:44:27,701 ! 
2023-05-09 13:44:27,701 ! Please make sure that 'octoprint_octolapse.static.docs.help' is included as a package by using
2023-05-09 13:44:27,701 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:44:27,701 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:44:27,701 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:44:27,701 ! 
2023-05-09 13:44:27,701 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:44:27,702 ! documentation page.
2023-05-09 13:44:27,702 ! 
2023-05-09 13:44:27,702 ! 
2023-05-09 13:44:27,702 ! !!
2023-05-09 13:44:27,702 ! 
2023-05-09 13:44:27,702 ! check.warn(importable)
2023-05-09 13:44:27,703 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.img' as data is deprecated, please list it in `packages`.
2023-05-09 13:44:27,703 ! !!
2023-05-09 13:44:27,703 ! 
2023-05-09 13:44:27,704 ! 
2023-05-09 13:44:27,704 ! ############################
2023-05-09 13:44:27,704 ! # Package would be ignored #
2023-05-09 13:44:27,704 ! ############################
2023-05-09 13:44:27,705 ! Python recognizes 'octoprint_octolapse.static.img' as an importable package,
2023-05-09 13:44:27,705 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:44:27,705 ! 
2023-05-09 13:44:27,705 ! 'octoprint_octolapse.static.img' has been automatically added to the distribution only
2023-05-09 13:44:27,705 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:44:27,705 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:44:27,706 ! 
2023-05-09 13:44:27,706 ! Please make sure that 'octoprint_octolapse.static.img' is included as a package by using
2023-05-09 13:44:27,706 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:44:27,706 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:44:27,706 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:44:27,706 ! 
2023-05-09 13:44:27,706 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:44:27,707 ! documentation page.
2023-05-09 13:44:27,707 ! 
2023-05-09 13:44:27,707 ! 
2023-05-09 13:44:27,707 ! !!
2023-05-09 13:44:27,707 ! 
2023-05-09 13:44:27,707 ! check.warn(importable)
2023-05-09 13:44:27,707 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.js' as data is deprecated, please list it in `packages`.
2023-05-09 13:44:27,708 ! !!
2023-05-09 13:44:27,708 ! 
2023-05-09 13:44:27,708 ! 
2023-05-09 13:44:27,708 ! ############################
2023-05-09 13:44:27,708 ! # Package would be ignored #
2023-05-09 13:44:27,708 ! ############################
2023-05-09 13:44:27,708 ! Python recognizes 'octoprint_octolapse.static.js' as an importable package,
2023-05-09 13:44:27,709 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:44:27,709 ! 
2023-05-09 13:44:27,709 ! 'octoprint_octolapse.static.js' has been automatically added to the distribution only
2023-05-09 13:44:27,709 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:44:27,709 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:44:27,709 ! 
2023-05-09 13:44:27,710 ! Please make sure that 'octoprint_octolapse.static.js' is included as a package by using
2023-05-09 13:44:27,710 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:44:27,710 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:44:27,710 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:44:27,710 ! 
2023-05-09 13:44:27,710 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:44:27,710 ! documentation page.
2023-05-09 13:44:27,711 ! 
2023-05-09 13:44:27,711 ! 
2023-05-09 13:44:27,711 ! !!
2023-05-09 13:44:27,711 ! 
2023-05-09 13:44:27,711 ! check.warn(importable)
2023-05-09 13:44:27,711 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.js.webcams.mjpg_streamer' as data is deprecated, please list it in `packages`.
2023-05-09 13:44:27,711 ! !!
2023-05-09 13:44:27,712 ! 
2023-05-09 13:44:27,712 ! 
2023-05-09 13:44:27,712 ! ############################
2023-05-09 13:44:27,712 ! # Package would be ignored #
2023-05-09 13:44:27,712 ! ############################
2023-05-09 13:44:27,712 ! Python recognizes 'octoprint_octolapse.static.js.webcams.mjpg_streamer' as an importable package,
2023-05-09 13:44:27,713 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:44:27,713 ! 
2023-05-09 13:44:27,713 ! 'octoprint_octolapse.static.js.webcams.mjpg_streamer' has been automatically added to the distribution only
2023-05-09 13:44:27,713 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:44:27,713 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:44:27,713 ! 
2023-05-09 13:44:27,713 ! Please make sure that 'octoprint_octolapse.static.js.webcams.mjpg_streamer' is included as a package by using
2023-05-09 13:44:27,714 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:44:27,714 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:44:27,714 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:44:27,714 ! 
2023-05-09 13:44:27,714 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:44:27,714 ! documentation page.
2023-05-09 13:44:27,714 ! 
2023-05-09 13:44:27,715 ! 
2023-05-09 13:44:27,715 ! !!
2023-05-09 13:44:27,715 ! 
2023-05-09 13:44:27,715 ! check.warn(importable)
2023-05-09 13:44:27,715 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.templates' as data is deprecated, please list it in `packages`.
2023-05-09 13:44:27,715 ! !!
2023-05-09 13:44:27,715 ! 
2023-05-09 13:44:27,716 ! 
2023-05-09 13:44:27,716 ! ############################
2023-05-09 13:44:27,716 ! # Package would be ignored #
2023-05-09 13:44:27,716 ! ############################
2023-05-09 13:44:27,716 ! Python recognizes 'octoprint_octolapse.templates' as an importable package,
2023-05-09 13:44:27,716 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:44:27,716 ! 
2023-05-09 13:44:27,717 ! 'octoprint_octolapse.templates' has been automatically added to the distribution only
2023-05-09 13:44:27,717 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:44:27,717 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:44:27,717 ! 
2023-05-09 13:44:27,717 ! Please make sure that 'octoprint_octolapse.templates' is included as a package by using
2023-05-09 13:44:27,717 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:44:27,717 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:44:27,718 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:44:27,718 ! 
2023-05-09 13:44:27,718 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:44:27,718 ! documentation page.
2023-05-09 13:44:27,718 ! 
2023-05-09 13:44:27,718 ! 
2023-05-09 13:44:27,718 ! !!
2023-05-09 13:44:27,719 ! 
2023-05-09 13:44:27,719 ! check.warn(importable)
2023-05-09 13:44:27,719 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.templates.webcams.mjpg_streamer' as data is deprecated, please list it in `packages`.
2023-05-09 13:44:27,719 ! !!
2023-05-09 13:44:27,719 ! 
2023-05-09 13:44:27,719 ! 
2023-05-09 13:44:27,719 ! ############################
2023-05-09 13:44:27,719 ! # Package would be ignored #
2023-05-09 13:44:27,720 ! ############################
2023-05-09 13:44:27,720 ! Python recognizes 'octoprint_octolapse.templates.webcams.mjpg_streamer' as an importable package,
2023-05-09 13:44:27,720 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:44:27,720 ! 
2023-05-09 13:44:27,720 ! 'octoprint_octolapse.templates.webcams.mjpg_streamer' has been automatically added to the distribution only
2023-05-09 13:44:27,720 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:44:27,721 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:44:27,721 ! 
2023-05-09 13:44:27,721 ! Please make sure that 'octoprint_octolapse.templates.webcams.mjpg_streamer' is included as a package by using
2023-05-09 13:44:27,721 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:44:27,721 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:44:27,721 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:44:27,721 ! 
2023-05-09 13:44:27,722 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:44:27,722 ! documentation page.
2023-05-09 13:44:27,722 ! 
2023-05-09 13:44:27,722 ! 
2023-05-09 13:44:27,722 ! !!
2023-05-09 13:44:27,722 ! 
2023-05-09 13:44:27,722 ! check.warn(importable)
2023-05-09 13:44:27,723 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:44:27,723 ! copying octoprint_octolapse/data/settings_default_0.3.3rc3.dev0.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:44:27,723 ! copying octoprint_octolapse/data/settings_default_0.4.0.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:44:27,723 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev0.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:44:27,723 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev2.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:44:27,723 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev3.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:44:27,724 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev4.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:44:27,724 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev5.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:44:27,724 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:44:27,724 ! copying octoprint_octolapse/data/settings_default_0.4.0rc2.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:44:27,724 ! copying octoprint_octolapse/data/settings_default_0.4.0rc3.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:44:27,724 ! copying octoprint_octolapse/data/settings_default_current.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:44:27,724 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 13:44:27,725 ! copying octoprint_octolapse/data/Images/no-camera-selected.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 13:44:27,725 ! copying octoprint_octolapse/data/Images/no-image-available.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 13:44:27,725 ! copying octoprint_octolapse/data/Images/no_snapshot.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 13:44:27,725 ! copying octoprint_octolapse/data/Images/test-snapshot-image.jpg -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 13:44:27,725 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/fonts
2023-05-09 13:44:27,725 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/fonts/DejaVu
2023-05-09 13:44:27,726 ! copying octoprint_octolapse/data/fonts/DejaVu/DejaVuSansMono.ttf -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/fonts/DejaVu
2023-05-09 13:44:27,726 ! copying octoprint_octolapse/data/fonts/DejaVu/license.txt -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/fonts/DejaVu
2023-05-09 13:44:27,726 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib
2023-05-09 13:44:27,726 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:44:27,726 ! copying octoprint_octolapse/data/lib/c/extruder.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:44:27,726 ! copying octoprint_octolapse/data/lib/c/extruder.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:44:27,726 ! copying octoprint_octolapse/data/lib/c/gcode_comment_processor.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:44:27,727 ! copying octoprint_octolapse/data/lib/c/gcode_comment_processor.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:44:27,727 ! copying octoprint_octolapse/data/lib/c/gcode_parser.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:44:27,727 ! copying octoprint_octolapse/data/lib/c/gcode_parser.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:44:27,727 ! copying octoprint_octolapse/data/lib/c/gcode_position.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:44:27,727 ! copying octoprint_octolapse/data/lib/c/gcode_position.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:44:27,727 ! copying octoprint_octolapse/data/lib/c/gcode_position_processor.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:44:27,728 ! copying octoprint_octolapse/data/lib/c/gcode_position_processor.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:44:27,728 ! copying octoprint_octolapse/data/lib/c/logging.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:44:27,728 ! copying octoprint_octolapse/data/lib/c/logging.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:44:27,728 ! copying octoprint_octolapse/data/lib/c/parsed_command.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:44:27,728 ! copying octoprint_octolapse/data/lib/c/parsed_command.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:44:27,728 ! copying octoprint_octolapse/data/lib/c/parsed_command_parameter.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:44:27,729 ! copying octoprint_octolapse/data/lib/c/parsed_command_parameter.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:44:27,729 ! copying octoprint_octolapse/data/lib/c/position.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:44:27,729 ! copying octoprint_octolapse/data/lib/c/position.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:44:27,729 ! copying octoprint_octolapse/data/lib/c/python_helpers.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:44:27,729 ! copying octoprint_octolapse/data/lib/c/python_helpers.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:44:27,729 ! copying octoprint_octolapse/data/lib/c/snapshot_plan.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:44:27,729 ! copying octoprint_octolapse/data/lib/c/snapshot_plan.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:44:27,730 ! copying octoprint_octolapse/data/lib/c/snapshot_plan_step.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:44:27,730 ! copying octoprint_octolapse/data/lib/c/snapshot_plan_step.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:44:27,730 ! copying octoprint_octolapse/data/lib/c/stabilization.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:44:27,730 ! copying octoprint_octolapse/data/lib/c/stabilization.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:44:27,730 ! copying octoprint_octolapse/data/lib/c/stabilization_results.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:44:27,730 ! copying octoprint_octolapse/data/lib/c/stabilization_results.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:44:27,731 ! copying octoprint_octolapse/data/lib/c/stabilization_smart_gcode.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:44:27,731 ! copying octoprint_octolapse/data/lib/c/stabilization_smart_gcode.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:44:27,731 ! copying octoprint_octolapse/data/lib/c/stabilization_smart_layer.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:44:27,731 ! copying octoprint_octolapse/data/lib/c/stabilization_smart_layer.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:44:27,731 ! copying octoprint_octolapse/data/lib/c/stabilization_snap_to_print.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:44:27,731 ! copying octoprint_octolapse/data/lib/c/stabilization_snap_to_print.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:44:27,731 ! copying octoprint_octolapse/data/lib/c/trigger_position.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:44:27,732 ! copying octoprint_octolapse/data/lib/c/trigger_position.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:44:27,732 ! copying octoprint_octolapse/data/lib/c/utilities.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:44:27,732 ! copying octoprint_octolapse/data/lib/c/utilities.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:44:27,732 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts
2023-05-09 13:44:27,732 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode
2023-05-09 13:44:27,733 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:44:27,733 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:44:27,733 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_02_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:44:27,733 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_03_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:44:27,733 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_04_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:44:27,733 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_05_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:44:27,734 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_06_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:44:27,734 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_07_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:44:27,734 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_08_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:44:27,734 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:44:27,734 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:44:27,734 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_02_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:44:27,735 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_03_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:44:27,735 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_04_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:44:27,735 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_05_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:44:27,735 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_06_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:44:27,735 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_07_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:44:27,735 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_08_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:44:27,736 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:44:27,736 ! copying octoprint_octolapse/data/scripts/linux/capture_image_leave_on_camera.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:44:27,736 ! copying octoprint_octolapse/data/scripts/linux/download-from-camera-and-rename.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:44:27,736 ! copying octoprint_octolapse/data/scripts/linux/initialize_dslr.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:44:27,736 ! copying octoprint_octolapse/data/scripts/linux/move_snapshots_to_target.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:44:27,736 ! copying octoprint_octolapse/data/scripts/linux/take_snapshot_and_download.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:44:27,737 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/windows
2023-05-09 13:44:27,737 ! copying octoprint_octolapse/data/scripts/windows/take_snapshot_and_download.bat -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/windows
2023-05-09 13:44:27,737 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/templates
2023-05-09 13:44:27,738 ! copying octoprint_octolapse/data/templates/cura_gcode_settings_template.txt -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/templates
2023-05-09 13:44:27,738 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types
2023-05-09 13:44:27,738 ! copying octoprint_octolapse/data/webcam_types/camera_types.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types
2023-05-09 13:44:27,739 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:44:27,739 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/logitech_c250.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:44:27,739 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/logitech_c920.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:44:27,739 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/logitech_c920_2.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:44:27,739 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/logitech_c920_3.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:44:27,739 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/raspi_cam_v2.1.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:44:27,740 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/raspi_cam_v2.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:44:27,740 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static
2023-05-09 13:44:27,740 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/css
2023-05-09 13:44:27,740 ! copying octoprint_octolapse/static/css/jquery.minicolors.css -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/css
2023-05-09 13:44:27,740 ! copying octoprint_octolapse/static/css/jquery.minicolors.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/css
2023-05-09 13:44:27,740 ! copying octoprint_octolapse/static/css/octolapse.css -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/css
2023-05-09 13:44:27,741 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs
2023-05-09 13:44:27,741 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,741 ! copying octoprint_octolapse/static/docs/help/dialog.renderings.in_process.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,741 ! copying octoprint_octolapse/static/docs/help/dialog.renderings.unfinished.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,741 ! copying octoprint_octolapse/static/docs/help/dialog.timelapse_files.snapshot_archive.import.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,741 ! copying octoprint_octolapse/static/docs/help/dialog.timelapse_files.snapshot_archive.tab.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,741 ! copying octoprint_octolapse/static/docs/help/dialog.timelapse_files.timelapse.tab.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,742 ! copying octoprint_octolapse/static/docs/help/error_help_error_not_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,742 ! copying octoprint_octolapse/static/docs/help/error_help_init_automatic_slicer_no_settings_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,742 ! copying octoprint_octolapse/static/docs/help/error_help_init_automatic_slicer_settings_missing.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,742 ! copying octoprint_octolapse/static/docs/help/error_help_init_before_print_start_camera_script_apply_failed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,742 ! copying octoprint_octolapse/static/docs/help/error_help_init_camera_init_test_failed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,742 ! copying octoprint_octolapse/static/docs/help/error_help_init_camera_settings_apply_failed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,742 ! copying octoprint_octolapse/static/docs/help/error_help_init_cant_print_from_sd.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,743 ! copying octoprint_octolapse/static/docs/help/error_help_init_directory_test_failed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,743 ! copying octoprint_octolapse/static/docs/help/error_help_init_ffmpeg_not_found_at_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,743 ! copying octoprint_octolapse/static/docs/help/error_help_init_ffmpeg_path_not_set.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,743 ! copying octoprint_octolapse/static/docs/help/error_help_init_ffmpeg_path_retrieve_exception.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,743 ! copying octoprint_octolapse/static/docs/help/error_help_init_incorrect_octoprint_version.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,743 ! copying octoprint_octolapse/static/docs/help/error_help_init_incorrect_print_start_state.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,744 ! copying octoprint_octolapse/static/docs/help/error_help_init_m114_not_supported.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,744 ! copying octoprint_octolapse/static/docs/help/error_help_init_manual_slicer_settings_missing.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,744 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_current_job_data_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,744 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_current_job_file_data_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,744 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_enabled_cameras.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,744 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_gcode_filepath_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,744 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_printer_profile_exists.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,745 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_printer_profile_selected.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,745 ! copying octoprint_octolapse/static/docs/help/error_help_init_octolapse_is_disabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,745 ! copying octoprint_octolapse/static/docs/help/error_help_init_overlay_font_path_not_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,745 ! copying octoprint_octolapse/static/docs/help/error_help_init_printer_not_configured.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,745 ! copying octoprint_octolapse/static/docs/help/error_help_init_rendering_file_template_invalid.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,745 ! copying octoprint_octolapse/static/docs/help/error_help_init_timelapse_start_exception.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,745 ! copying octoprint_octolapse/static/docs/help/error_help_init_too_few_extruders_defined.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,746 ! copying octoprint_octolapse/static/docs/help/error_help_init_too_few_extruders_offsets_defined.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,746 ! copying octoprint_octolapse/static/docs/help/error_help_init_unable_to_accept_snapshot_plan.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,746 ! copying octoprint_octolapse/static/docs/help/error_help_init_unexpected_exception.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,746 ! copying octoprint_octolapse/static/docs/help/error_help_init_unknown_file_origin.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,746 ! copying octoprint_octolapse/static/docs/help/error_help_not_a_valid_error_dict.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,746 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_axis_mode_e_unknown.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,746 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_axis_mode_xyz_unknown.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,747 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_incorrect_trigger_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,747 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_no_definite_position.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,747 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_no_metric_units.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,747 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_no_snapshot_commands_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,747 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_no_snapshot_plans_returned.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,747 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_printer_not_primed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,747 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_unhandled_exception.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,748 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_unknown_trigger_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,748 ! copying octoprint_octolapse/static/docs/help/error_help_rendering_archive_import_no_files_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,748 ! copying octoprint_octolapse/static/docs/help/error_help_rendering_archive_import_zip_file_corrupt.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,748 ! copying octoprint_octolapse/static/docs/help/error_help_rendering_archive_import_zip_file_too_large.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,748 ! copying octoprint_octolapse/static/docs/help/error_help_settings_slicer_simplify3d_duplicate_toolhead_numbers.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,748 ! copying octoprint_octolapse/static/docs/help/error_help_settings_slicer_simplify3d_extruder_count_mismatch.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,749 ! copying octoprint_octolapse/static/docs/help/error_help_settings_slicer_simplify3d_max_extruder_count_exceeded.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,749 ! copying octoprint_octolapse/static/docs/help/error_help_settings_slicer_simplify3d_unexpected_max_toolhead_number.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,749 ! copying octoprint_octolapse/static/docs/help/error_help_timelapse_cannot_aquire_job_lock.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,749 ! copying octoprint_octolapse/static/docs/help/main_settings.auto_reload_frames.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,749 ! copying octoprint_octolapse/static/docs/help/main_settings.auto_reload_latest_snapshot.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,749 ! copying octoprint_octolapse/static/docs/help/main_settings.automatic_update_interval_days.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,749 ! copying octoprint_octolapse/static/docs/help/main_settings.automatic_updates_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,750 ! copying octoprint_octolapse/static/docs/help/main_settings.cancel_print_on_startup_error.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,750 ! copying octoprint_octolapse/static/docs/help/main_settings.enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,750 ! copying octoprint_octolapse/static/docs/help/main_settings.is_test_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,750 ! copying octoprint_octolapse/static/docs/help/main_settings.preview_snapshot_plan_autoclose.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,750 ! copying octoprint_octolapse/static/docs/help/main_settings.preview_snapshot_plan_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,750 ! copying octoprint_octolapse/static/docs/help/main_settings.preview_snapshot_plans.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,750 ! copying octoprint_octolapse/static/docs/help/main_settings.show_extruder_state_changes.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,751 ! copying octoprint_octolapse/static/docs/help/main_settings.show_navbar_icon.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,751 ! copying octoprint_octolapse/static/docs/help/main_settings.show_navbar_when_not_printing.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,751 ! copying octoprint_octolapse/static/docs/help/main_settings.show_position_changes.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,751 ! copying octoprint_octolapse/static/docs/help/main_settings.show_printer_state_changes.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,751 ! copying octoprint_octolapse/static/docs/help/main_settings.show_snapshot_plan_information.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,751 ! copying octoprint_octolapse/static/docs/help/main_settings.show_trigger_state_changes.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,752 ! copying octoprint_octolapse/static/docs/help/main_settings.snapshot_archive_directory.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,752 ! copying octoprint_octolapse/static/docs/help/main_settings.temporary_directory.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,752 ! copying octoprint_octolapse/static/docs/help/main_settings.timelapse_directory.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,752 ! copying octoprint_octolapse/static/docs/help/profiles.camera.apply_settings_at_startup.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,752 ! copying octoprint_octolapse/static/docs/help/profiles.camera.apply_settings_before_print.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,752 ! copying octoprint_octolapse/static/docs/help/profiles.camera.apply_settings_when_disabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,753 ! copying octoprint_octolapse/static/docs/help/profiles.camera.camera_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,753 ! copying octoprint_octolapse/static/docs/help/profiles.camera.delay.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,753 ! copying octoprint_octolapse/static/docs/help/profiles.camera.edit_cutsom_image_preferences.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,753 ! copying octoprint_octolapse/static/docs/help/profiles.camera.external_camera_snapshot_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,753 ! copying octoprint_octolapse/static/docs/help/profiles.camera.gcode_camera_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,753 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_after_render_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,753 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_after_snapshot_gcode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,754 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_after_snapshot_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,754 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_before_render_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,754 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_before_snapshot_gcode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,754 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_before_snapshot_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,754 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_print_end_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,754 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_print_start_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,755 ! copying octoprint_octolapse/static/docs/help/profiles.camera.snapshot_transpose.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,755 ! copying octoprint_octolapse/static/docs/help/profiles.camera.stream_template.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,755 ! copying octoprint_octolapse/static/docs/help/profiles.camera.timeout_ms.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,755 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.address.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,755 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.enable_custom_image_preferences.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,755 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.ignore_ssl_error.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,755 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.1.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,756 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029518.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,756 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029519.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,756 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029538.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,756 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029670.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,756 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029671.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,756 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029675.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,757 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094849.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,757 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094850.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,757 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094851.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,757 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094856.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,757 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094857.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,757 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094858.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,758 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094860.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,758 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094861.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,758 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094867.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,758 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094868.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,758 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094870.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,758 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094871.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,758 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094872.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,759 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094873.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,759 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094874.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,759 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10291459.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,759 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963776.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,759 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963777.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,759 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963778.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,760 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963788.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,760 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963790.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,760 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963791.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,760 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963795.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,760 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963796.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,760 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963797.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,760 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963800.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,761 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963802.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,761 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963803.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,761 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963804.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,761 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963807.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,761 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963810.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,761 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963818.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,762 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.password.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,762 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.snapshot_request_template.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,762 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.stream_download.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,762 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.username.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,762 ! copying octoprint_octolapse/static/docs/help/profiles.library.is_custom.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,762 ! copying octoprint_octolapse/static/docs/help/profiles.logging.enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,762 ! copying octoprint_octolapse/static/docs/help/profiles.logging.log_all_errors.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,763 ! copying octoprint_octolapse/static/docs/help/profiles.logging.log_to_console.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,763 ! copying octoprint_octolapse/static/docs/help/profiles.logging.logging_level.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,763 ! copying octoprint_octolapse/static/docs/help/profiles.logging.manage_log_files.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,769 ! copying octoprint_octolapse/static/docs/help/profiles.logging.modules_to_log.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,780 ! copying octoprint_octolapse/static/docs/help/profiles.printer.auto_detect_position.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,787 ! copying octoprint_octolapse/static/docs/help/profiles.printer.auto_position_detection_commands.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,787 ! copying octoprint_octolapse/static/docs/help/profiles.printer.automatic_configuration.is_automatic.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,787 ! copying octoprint_octolapse/static/docs/help/profiles.printer.automatic_configuration.make.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,788 ! copying octoprint_octolapse/static/docs/help/profiles.printer.automatic_configuration.model.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,788 ! copying octoprint_octolapse/static/docs/help/profiles.printer.bed_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,788 ! copying octoprint_octolapse/static/docs/help/profiles.printer.custom_bounding_box.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,788 ! copying octoprint_octolapse/static/docs/help/profiles.printer.default_extruder.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,788 ! copying octoprint_octolapse/static/docs/help/profiles.printer.default_firmware_retractions.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,794 ! copying octoprint_octolapse/static/docs/help/profiles.printer.default_firmware_retractions_zhop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,794 ! copying octoprint_octolapse/static/docs/help/profiles.printer.e_axis_default_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,794 ! copying octoprint_octolapse/static/docs/help/profiles.printer.extruder_offsets.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,795 ! copying octoprint_octolapse/static/docs/help/profiles.printer.g90_influences_extruder.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,795 ! copying octoprint_octolapse/static/docs/help/profiles.printer.gocde_axis_compatibility_mode_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,795 ! copying octoprint_octolapse/static/docs/help/profiles.printer.home_axis_gcode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,795 ! copying octoprint_octolapse/static/docs/help/profiles.printer.invert_e.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,795 ! copying octoprint_octolapse/static/docs/help/profiles.printer.invert_x.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,795 ! copying octoprint_octolapse/static/docs/help/profiles.printer.invert_y.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,796 ! copying octoprint_octolapse/static/docs/help/profiles.printer.invert_z.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,796 ! copying octoprint_octolapse/static/docs/help/profiles.printer.minimum_layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,796 ! copying octoprint_octolapse/static/docs/help/profiles.printer.num_extruders.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,796 ! copying octoprint_octolapse/static/docs/help/profiles.printer.origin_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,796 ! copying octoprint_octolapse/static/docs/help/profiles.printer.override_octoprint_profile_settings.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,796 ! copying octoprint_octolapse/static/docs/help/profiles.printer.priming_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,797 ! copying octoprint_octolapse/static/docs/help/profiles.printer.restrict_snapshot_area.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,797 ! copying octoprint_octolapse/static/docs/help/profiles.printer.shared_extruder.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,797 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicer_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,797 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.automatic.continue_on_failure.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,806 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.automatic.disable_automatic_save.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,806 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.4_2.speed_z_hop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,807 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,807 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.max_feedrate_z_override.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,807 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_amount.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,807 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_enable.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,808 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_hop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,808 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_hop_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,815 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_prime_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,815 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_retract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,815 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.smooth_spiralized_contours.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,816 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.speed_travel.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,816 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.axis_speed_display_unit_options.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,816 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.deretract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,816 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,816 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.retract_before_move.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,823 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.retract_length.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,830 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.retract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,830 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.travel_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,831 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.vase_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,831 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.z_hop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,831 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.z_travel_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,831 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.extruder_use_retract.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,831 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,831 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.retraction_distance.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,832 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.retraction_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,832 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.retraction_vertical_lift.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,832 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.vase_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,832 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.x_y_axis_movement_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,832 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.z_axis_movement_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,833 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.deretract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,842 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,842 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.retract_length.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,842 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.retract_lift.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,842 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.retract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,842 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.travel_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,843 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.vase_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,843 ! copying octoprint_octolapse/static/docs/help/profiles.printer.snapshot_command.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,843 ! copying octoprint_octolapse/static/docs/help/profiles.printer.suppress_snapshot_command_always.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,844 ! copying octoprint_octolapse/static/docs/help/profiles.printer.units_default.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,844 ! copying octoprint_octolapse/static/docs/help/profiles.printer.xyz_axes_default_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,844 ! copying octoprint_octolapse/static/docs/help/profiles.printer.zero_based_extruder.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,844 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.archive_snapshots.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,851 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.bitrate.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,851 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.constant_rate_factor.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,851 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.enable_watermark.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,851 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,852 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.fps.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,852 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.fps_calculation_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,852 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.max_fps.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,852 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.min_fps.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,852 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.output_format.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,852 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.output_template.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,853 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_font_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,853 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_font_size.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,853 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_outline_color.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,853 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_outline_width.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,853 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_preview.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,853 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_alignment.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,854 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_color.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,854 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_halign.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,854 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_pos_xy.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,854 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_template.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,858 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_template_current_time.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,858 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_template_time_elapsed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,859 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_valign.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,859 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.post_roll_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,859 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.pre_roll_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,859 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.run_length_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,859 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.thread_count.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,859 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.wait_for_moves_to_finish.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,860 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_fixed_coordinate.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,860 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_fixed_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,860 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_fixed_path_invert_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,860 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_fixed_path_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,860 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_relative.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,861 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_relative_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,862 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_relative_path_invert_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,862 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_relative_path_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,862 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,862 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_fixed_coordinate.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,863 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_fixed_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,863 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_fixed_path_invert_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,863 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_fixed_path_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,863 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_relative.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,864 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_relative_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,865 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_relative_path_invert_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,865 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_relative_path_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,865 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,865 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.calculate_intersections.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,866 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.extruder_state_requirements_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,866 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.layer_trigger_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,866 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.position_restriction_shape.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,866 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.position_restriction_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,866 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.position_restrictions_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,866 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.require_zhop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,867 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.smart_layer_disable_z_lift.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,867 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.smart_layer_snap_to_print_high_quality.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,867 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.smart_layer_snap_to_print_smooth.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,868 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.smart_layer_trigger_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,868 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.timer_trigger_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,868 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.trigger_subtype.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,869 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.trigger_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,869 ! copying octoprint_octolapse/static/docs/help/quality_issues_fast_trigger.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,869 ! copying octoprint_octolapse/static/docs/help/quality_issues_low_quality_snap_to_print.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,869 ! copying octoprint_octolapse/static/docs/help/quality_issues_no_print_features_detected.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,870 ! copying octoprint_octolapse/static/docs/help/settings.import.import_method.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,870 ! copying octoprint_octolapse/static/docs/help/settings.import.import_text.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,870 ! copying octoprint_octolapse/static/docs/help/snapshot_plan_missed_snapshots.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:44:27,870 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/img
2023-05-09 13:44:27,870 ! copying octoprint_octolapse/static/img/watermark.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/img
2023-05-09 13:44:27,871 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:44:27,871 ! copying octoprint_octolapse/static/js/jquery.minicolors.min.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:44:27,871 ! copying octoprint_octolapse/static/js/jquery.validate.min.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:44:27,871 ! copying octoprint_octolapse/static/js/octolapse.dialog.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:44:27,871 ! copying octoprint_octolapse/static/js/octolapse.dialog.renderings.in_process.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:44:27,872 ! copying octoprint_octolapse/static/js/octolapse.dialog.renderings.unfinished.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:44:27,872 ! copying octoprint_octolapse/static/js/octolapse.dialog.timelapse_files.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:44:27,872 ! copying octoprint_octolapse/static/js/octolapse.file_browser.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:44:27,872 ! copying octoprint_octolapse/static/js/octolapse.help.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:44:27,872 ! copying octoprint_octolapse/static/js/octolapse.helpers.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:44:27,872 ! copying octoprint_octolapse/static/js/octolapse.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:44:27,873 ! copying octoprint_octolapse/static/js/octolapse.profiles.camera.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:44:27,873 ! copying octoprint_octolapse/static/js/octolapse.profiles.camera.webcam.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:44:27,873 ! copying octoprint_octolapse/static/js/octolapse.profiles.camera.webcam.mjpg_streamer.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:44:27,874 ! copying octoprint_octolapse/static/js/octolapse.profiles.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:44:27,874 ! copying octoprint_octolapse/static/js/octolapse.profiles.library.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:44:27,874 ! copying octoprint_octolapse/static/js/octolapse.profiles.logging.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:44:27,874 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:44:27,875 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.slicer.cura.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:44:27,875 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.slicer.other.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:44:27,875 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.slicer.simplify_3d.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:44:27,875 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.slicer.slic3r_pe.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:44:27,875 ! copying octoprint_octolapse/static/js/octolapse.profiles.rendering.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:44:27,876 ! copying octoprint_octolapse/static/js/octolapse.profiles.stabilization.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:44:27,876 ! copying octoprint_octolapse/static/js/octolapse.profiles.trigger.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:44:27,876 ! copying octoprint_octolapse/static/js/octolapse.settings.import.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:44:27,876 ! copying octoprint_octolapse/static/js/octolapse.settings.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:44:27,876 ! copying octoprint_octolapse/static/js/octolapse.settings.main.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:44:27,877 ! copying octoprint_octolapse/static/js/octolapse.status.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:44:27,877 ! copying octoprint_octolapse/static/js/octolapse.status.snapshotplan.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:44:27,877 ! copying octoprint_octolapse/static/js/octolapse.status.snapshotplan_preview.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:44:27,878 ! copying octoprint_octolapse/static/js/showdown.min.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:44:27,878 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js/webcams
2023-05-09 13:44:27,880 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js/webcams/mjpg_streamer
2023-05-09 13:44:27,881 ! copying octoprint_octolapse/static/js/webcams/mjpg_streamer/raspi_cam_v2.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js/webcams/mjpg_streamer
2023-05-09 13:44:27,881 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:44:27,881 ! copying octoprint_octolapse/templates/octolapse_dialog.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:44:27,884 ! copying octoprint_octolapse/templates/octolapse_dialog_rendering_in_process.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:44:27,884 ! copying octoprint_octolapse/templates/octolapse_dialog_rendering_unfinished.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:44:27,884 ! copying octoprint_octolapse/templates/octolapse_dialog_timelapse_files.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:44:27,884 ! copying octoprint_octolapse/templates/octolapse_file_browser.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:44:27,885 ! copying octoprint_octolapse/templates/octolapse_helpers.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:44:27,885 ! copying octoprint_octolapse/templates/octolapse_navbar.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:44:27,885 ! copying octoprint_octolapse/templates/octolapse_profile_dialog_add_edit.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:44:27,885 ! copying octoprint_octolapse/templates/octolapse_profiles.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:44:27,886 ! copying octoprint_octolapse/templates/octolapse_profiles_camera.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:44:27,886 ! copying octoprint_octolapse/templates/octolapse_profiles_camera_webcam.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:44:27,886 ! copying octoprint_octolapse/templates/octolapse_profiles_camera_webcam_mjpg_streamer.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:44:27,886 ! copying octoprint_octolapse/templates/octolapse_profiles_library.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:44:27,886 ! copying octoprint_octolapse/templates/octolapse_profiles_logging.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:44:27,886 ! copying octoprint_octolapse/templates/octolapse_profiles_printer.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:44:27,886 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_automatic.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:44:27,887 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_automatic.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:44:27,887 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_cura.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:44:27,887 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_cura_4.2.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:44:27,887 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_other.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:44:27,887 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_simplify3d.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:44:27,887 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_slic3r_pe.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:44:27,887 ! copying octoprint_octolapse/templates/octolapse_profiles_rendering.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:44:27,888 ! copying octoprint_octolapse/templates/octolapse_profiles_stabilization.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:44:27,888 ! copying octoprint_octolapse/templates/octolapse_profiles_trigger.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:44:27,888 ! copying octoprint_octolapse/templates/octolapse_settings.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:44:27,888 ! copying octoprint_octolapse/templates/octolapse_settings_import.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:44:27,889 ! copying octoprint_octolapse/templates/octolapse_settings_main.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:44:27,889 ! copying octoprint_octolapse/templates/octolapse_snapshot_plan.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:44:27,889 ! copying octoprint_octolapse/templates/octolapse_status_extruder.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:44:27,889 ! copying octoprint_octolapse/templates/octolapse_status_position.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:44:27,890 ! copying octoprint_octolapse/templates/octolapse_status_printer_state.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:44:27,890 ! copying octoprint_octolapse/templates/octolapse_status_snapshot_plan.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:44:27,890 ! copying octoprint_octolapse/templates/octolapse_status_triggers.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:44:27,890 ! copying octoprint_octolapse/templates/octolapse_tab.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:44:27,890 ! copying octoprint_octolapse/templates/octolapse_tab_latest_snapshot.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:44:27,892 ! copying octoprint_octolapse/templates/octolapse_tab_settings_current.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:44:27,892 ! copying octoprint_octolapse/templates/octolapse_tab_settings_current_cameras.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:44:27,892 ! copying octoprint_octolapse/templates/octolapse_tab_snapshot_plan_preview_popup.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:44:27,892 ! copying octoprint_octolapse/templates/octolapse_tab_webcam_settings_popup.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:44:27,892 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams
2023-05-09 13:44:27,893 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams/mjpg_streamer
2023-05-09 13:44:27,893 ! copying octoprint_octolapse/templates/webcams/mjpg_streamer/logitech_c250.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams/mjpg_streamer
2023-05-09 13:44:27,893 ! copying octoprint_octolapse/templates/webcams/mjpg_streamer/logitech_c920.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams/mjpg_streamer
2023-05-09 13:44:27,893 ! copying octoprint_octolapse/templates/webcams/mjpg_streamer/raspi_cam_v2.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams/mjpg_streamer
2023-05-09 13:44:27,893 ! UPDATING build/lib.linux-aarch64-cpython-310/octoprint_octolapse/_version.py
2023-05-09 13:44:27,893 ! set build/lib.linux-aarch64-cpython-310/octoprint_octolapse/_version.py to 'v0.4.2'
2023-05-09 13:44:27,893 ! running build_ext
2023-05-09 13:44:27,894 ! Compiling Octolapse Parser Extension with <distutils.unixccompiler.UnixCCompiler object at 0x7281ea3460>.
2023-05-09 13:44:27,894 ! building 'GcodePositionProcessor' extension
2023-05-09 13:44:27,894 ! creating build/temp.linux-aarch64-cpython-310
2023-05-09 13:44:27,894 ! creating build/temp.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:44:27,894 ! creating build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:44:27,894 ! creating build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib
2023-05-09 13:44:27,894 ! creating build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:44:27,895 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/extruder.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/extruder.o -O3 -std=c++11
2023-05-09 13:44:27,895 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/gcode_comment_processor.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/gcode_comment_processor.o -O3 -std=c++11
2023-05-09 13:44:27,895 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.cpp: In member function 'void gcode_comment_processor::update_feature_from_section(position&) const':
2023-05-09 13:44:27,895 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.cpp:99:16: warning: enumeration value 'section_type_no_section' not handled in switch [-Wswitch]
2023-05-09 13:44:27,895 ! 99 |         switch (current_section_)
2023-05-09 13:44:27,896 ! |                ^
2023-05-09 13:44:27,896 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/gcode_parser.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/gcode_parser.o -O3 -std=c++11
2023-05-09 13:44:27,896 ! octoprint_octolapse/data/lib/c/gcode_parser.cpp: In member function 'bool gcode_parser::try_parse_gcode(const char*, parsed_command&)':
2023-05-09 13:44:27,896 ! octoprint_octolapse/data/lib/c/gcode_parser.cpp:148:47: warning: suggest parentheses around '&&' within '||' [-Wparentheses]
2023-05-09 13:44:27,896 ! 148 |     else if (cur_char > 32 || cur_char == ' ' && has_seen_character)
2023-05-09 13:44:27,897 ! |                               ~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:44:27,897 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/gcode_position.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/gcode_position.o -O3 -std=c++11
2023-05-09 13:44:27,897 ! octoprint_octolapse/data/lib/c/gcode_position.cpp: In member function 'void gcode_position::add_position(position&)':
2023-05-09 13:44:27,897 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:395:12: warning: operation on '((gcode_position*)this)->gcode_position::cur_pos_' may be undefined [-Wsequence-point]
2023-05-09 13:44:27,897 ! 395 |   cur_pos_ = (++cur_pos_) % NUM_POSITIONS;
2023-05-09 13:44:27,898 ! octoprint_octolapse/data/lib/c/gcode_position.cpp: In member function 'void gcode_position::add_position(parsed_command&)':
2023-05-09 13:44:27,898 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:402:12: warning: operation on '((gcode_position*)this)->gcode_position::cur_pos_' may be undefined [-Wsequence-point]
2023-05-09 13:44:27,898 ! 402 |   cur_pos_ = (++cur_pos_) % NUM_POSITIONS;
2023-05-09 13:44:27,898 ! octoprint_octolapse/data/lib/c/gcode_position.cpp: In member function 'void gcode_position::update(parsed_command&, long int, long int, long int)':
2023-05-09 13:44:27,898 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:659:31: warning: comparison of integer expressions of different signedness: 'const unsigned int' and 'int' [-Wsign-compare]
2023-05-09 13:44:27,898 ! 659 |                 if (increment > p_current_pos->height_increment && increment > 1)
2023-05-09 13:44:27,899 ! |                     ~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:44:27,899 ! octoprint_octolapse/data/lib/c/gcode_position.cpp: In member function 'void gcode_position::process_g10(position*, parsed_command&)':
2023-05-09 13:44:27,899 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:952:10: warning: variable 's' set but not used [-Wunused-but-set-variable]
2023-05-09 13:44:27,899 ! 952 |   double s = 0;
2023-05-09 13:44:27,899 ! |          ^
2023-05-09 13:44:27,899 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:953:8: warning: variable 'has_s' set but not used [-Wunused-but-set-variable]
2023-05-09 13:44:27,900 ! 953 |   bool has_s = false;
2023-05-09 13:44:27,900 ! |        ^~~~~
2023-05-09 13:44:27,900 ! In file included from octoprint_octolapse/data/lib/c/gcode_position.h:29,
2023-05-09 13:44:27,900 ! from octoprint_octolapse/data/lib/c/gcode_position.cpp:22:
2023-05-09 13:44:27,901 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h: At global scope:
2023-05-09 13:44:27,901 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:77:20: warning: 'SLICER_PE_SKIRT_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:44:27,901 ! 77 | static const char* SLICER_PE_SKIRT_COMMENTS[] = {"skirt", "move to first skirt point", NULL};
2023-05-09 13:44:27,901 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:44:27,901 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:73:20: warning: 'SLICER_PE_BRIDGE_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:44:27,902 ! 73 | static const char* SLICER_PE_BRIDGE_COMMENTS[] = {
2023-05-09 13:44:27,904 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:44:27,904 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:72:20: warning: 'SLICER_PE_GAP_FILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:44:27,905 ! 72 | static const char* SLICER_PE_GAP_FILL_COMMENTS[] = {"gap fill", "move to first gap fill point", NULL};
2023-05-09 13:44:27,905 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:44:27,905 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:69:20: warning: 'SLICER_PE_SOLID_INFILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:44:27,906 ! 69 | static const char* SLICER_PE_SOLID_INFILL_COMMENTS[] = {
2023-05-09 13:44:27,906 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:44:27,907 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:68:20: warning: 'SLICER_PE_INFILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:44:27,907 ! 68 | static const char* SLICER_PE_INFILL_COMMENTS[] = {"infill", "move to first infill point", NULL};
2023-05-09 13:44:27,907 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:44:27,907 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:67:20: warning: 'SLICER_PE_UNKNOWN_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:44:27,907 ! 67 | static const char* SLICER_PE_UNKNOWN_PERIMETER_COMMENTS[] = {"perimeter", "move to first perimeter point", NULL};
2023-05-09 13:44:27,907 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:44:27,907 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:64:20: warning: 'SLICER_PE_INNER_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:44:27,909 ! 64 | static const char* SLICER_PE_INNER_PERIMETER_COMMENTS[] = {
2023-05-09 13:44:27,909 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:44:27,909 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:61:20: warning: 'SLICER_PE_OUTER_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:44:27,909 ! 61 | static const char* SLICER_PE_OUTER_PERIMETER_COMMENTS[] = {
2023-05-09 13:44:27,909 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:44:27,910 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/gcode_position_processor.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/gcode_position_processor.o -O3 -std=c++11
2023-05-09 13:44:27,910 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:915: warning: ignoring '#pragma region location_detection_commands' [-Wunknown-pragmas]
2023-05-09 13:44:27,910 ! 915 | #pragma region location_detection_commands
2023-05-09 13:44:27,910 ! |
2023-05-09 13:44:27,910 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:955: warning: ignoring '#pragma endregion Parse' [-Wunknown-pragmas]
2023-05-09 13:44:27,910 ! 955 | #pragma endregion Parse the list of location detection commands
2023-05-09 13:44:27,911 ! |
2023-05-09 13:44:27,911 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1122: warning: ignoring '#pragma region Extract' [-Wunknown-pragmas]
2023-05-09 13:44:27,911 ! 1122 | #pragma region Extract extruder objects
2023-05-09 13:44:27,911 ! |
2023-05-09 13:44:27,911 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1219: warning: ignoring '#pragma endregion Parse' [-Wunknown-pragmas]
2023-05-09 13:44:27,912 ! 1219 | #pragma endregion Parse extruder objects
2023-05-09 13:44:27,912 ! |
2023-05-09 13:44:27,912 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1221: warning: ignoring '#pragma region Extract' [-Wunknown-pragmas]
2023-05-09 13:44:27,912 ! 1221 | #pragma region Extract firmware extruder offsets from the printer settings
2023-05-09 13:44:27,912 ! |
2023-05-09 13:44:27,913 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1334: warning: ignoring '#pragma endregion Extract' [-Wunknown-pragmas]
2023-05-09 13:44:27,913 ! 1334 | #pragma endregion Extract firmware extruder offsets from the printer settings
2023-05-09 13:44:27,913 ! |
2023-05-09 13:44:27,913 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp: In function 'int main(int, char**)':
2023-05-09 13:44:27,913 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:56:27: warning: 'void PyEval_InitThreads()' is deprecated [-Wdeprecated-declarations]
2023-05-09 13:44:27,914 ! 56 |         PyEval_InitThreads();
2023-05-09 13:44:27,914 ! |         ~~~~~~~~~~~~~~~~~~^~
2023-05-09 13:44:27,914 ! In file included from /usr/include/python3.10/Python.h:130,
2023-05-09 13:44:27,914 ! from octoprint_octolapse/data/lib/c/gcode_position_processor.h:30,
2023-05-09 13:44:27,914 ! from octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:23:
2023-05-09 13:44:27,914 ! /usr/include/python3.10/ceval.h:122:37: note: declared here
2023-05-09 13:44:27,914 ! 122 | Py_DEPRECATED(3.9) PyAPI_FUNC(void) PyEval_InitThreads(void);
2023-05-09 13:44:27,914 ! |                                     ^~~~~~~~~~~~~~~~~~
2023-05-09 13:44:27,915 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp: In function 'PyObject* Initialize(PyObject*, PyObject*)':
2023-05-09 13:44:27,915 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:371:19: warning: unused variable 'p_gcode_position' [-Wunused-variable]
2023-05-09 13:44:27,915 ! 371 |   gcode_position* p_gcode_position = NULL;
2023-05-09 13:44:27,915 ! |                   ^~~~~~~~~~~~~~~~
2023-05-09 13:44:27,915 ! In file included from /usr/include/c++/12.2.1/bits/cxxabi_init_exception.h:38,
2023-05-09 13:44:27,915 ! from /usr/include/c++/12.2.1/bits/exception_ptr.h:38,
2023-05-09 13:44:27,915 ! from /usr/include/c++/12.2.1/exception:168,
2023-05-09 13:44:27,915 ! from /usr/include/c++/12.2.1/stdexcept:38,
2023-05-09 13:44:27,916 ! from /usr/include/c++/12.2.1/system_error:41,
2023-05-09 13:44:27,916 ! from /usr/include/c++/12.2.1/bits/ios_base.h:46,
2023-05-09 13:44:27,916 ! from /usr/include/c++/12.2.1/iomanip:40,
2023-05-09 13:44:27,916 ! from octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:24:
2023-05-09 13:44:27,916 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp: In function 'bool ParseStabilizationArgs(PyObject*, stabilization_args*, PyObject**, PyObject**)':
2023-05-09 13:44:27,916 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1406:12: error: converting to 'bool' from 'std::nullptr_t' requires direct-initialization [-fpermissive]
2023-05-09 13:44:27,916 ! 1406 |     return NULL;
2023-05-09 13:44:27,917 ! |            ^~~~
2023-05-09 13:44:27,917 ! In file included from octoprint_octolapse/data/lib/c/gcode_position_processor.h:37:
2023-05-09 13:44:27,917 ! octoprint_octolapse/data/lib/c/stabilization_smart_gcode.h: At global scope:
2023-05-09 13:44:27,917 ! octoprint_octolapse/data/lib/c/stabilization_smart_gcode.h:5:20: warning: 'SMART_GCODE_STABILIZATION' defined but not used [-Wunused-variable]
2023-05-09 13:44:27,917 ! 5 | static const char* SMART_GCODE_STABILIZATION = "smart_gcode";
2023-05-09 13:44:27,917 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:44:27,917 ! In file included from octoprint_octolapse/data/lib/c/gcode_position_processor.h:36:
2023-05-09 13:44:27,918 ! octoprint_octolapse/data/lib/c/stabilization_smart_layer.h:11:20: warning: 'SMART_LAYER_STABILIZATION' defined but not used [-Wunused-variable]
2023-05-09 13:44:27,918 ! 11 | static const char* SMART_LAYER_STABILIZATION = "smart_layer";
2023-05-09 13:44:27,918 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:44:27,918 ! In file included from octoprint_octolapse/data/lib/c/gcode_position_processor.h:35:
2023-05-09 13:44:27,918 ! octoprint_octolapse/data/lib/c/stabilization.h:44:20: warning: 'send_parsed_command_never' defined but not used [-Wunused-variable]
2023-05-09 13:44:27,918 ! 44 | static const char* send_parsed_command_never = "never";
2023-05-09 13:44:27,918 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:44:27,918 ! octoprint_octolapse/data/lib/c/stabilization.h:43:20: warning: 'send_parsed_command_last' defined but not used [-Wunused-variable]
2023-05-09 13:44:27,919 ! 43 | static const char* send_parsed_command_last = "last";
2023-05-09 13:44:27,919 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:44:27,919 ! octoprint_octolapse/data/lib/c/stabilization.h:42:20: warning: 'send_parsed_command_first' defined but not used [-Wunused-variable]
2023-05-09 13:44:27,919 ! 42 | static const char* send_parsed_command_first = "first";
2023-05-09 13:44:27,919 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:44:27,919 ! octoprint_octolapse/data/lib/c/stabilization.h:41:20: warning: 'snapshot_action' defined but not used [-Wunused-variable]
2023-05-09 13:44:27,919 ! 41 | static const char* snapshot_action = "snapshot";
2023-05-09 13:44:27,919 ! |                    ^~~~~~~~~~~~~~~
2023-05-09 13:44:27,920 ! octoprint_octolapse/data/lib/c/stabilization.h:40:20: warning: 'travel_action' defined but not used [-Wunused-variable]
2023-05-09 13:44:27,920 ! 40 | static const char* travel_action = "travel";
2023-05-09 13:44:27,920 ! |                    ^~~~~~~~~~~~~
2023-05-09 13:44:27,920 ! In file included from octoprint_octolapse/data/lib/c/gcode_position.h:29,
2023-05-09 13:44:27,920 ! from octoprint_octolapse/data/lib/c/gcode_position_processor.h:33:
2023-05-09 13:44:27,920 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:77:20: warning: 'SLICER_PE_SKIRT_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:44:27,920 ! 77 | static const char* SLICER_PE_SKIRT_COMMENTS[] = {"skirt", "move to first skirt point", NULL};
2023-05-09 13:44:27,921 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:44:27,921 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:73:20: warning: 'SLICER_PE_BRIDGE_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:44:27,921 ! 73 | static const char* SLICER_PE_BRIDGE_COMMENTS[] = {
2023-05-09 13:44:27,921 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:44:27,921 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:72:20: warning: 'SLICER_PE_GAP_FILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:44:27,921 ! 72 | static const char* SLICER_PE_GAP_FILL_COMMENTS[] = {"gap fill", "move to first gap fill point", NULL};
2023-05-09 13:44:27,921 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:44:27,922 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:69:20: warning: 'SLICER_PE_SOLID_INFILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:44:27,922 ! 69 | static const char* SLICER_PE_SOLID_INFILL_COMMENTS[] = {
2023-05-09 13:44:27,922 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:44:27,922 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:68:20: warning: 'SLICER_PE_INFILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:44:27,922 ! 68 | static const char* SLICER_PE_INFILL_COMMENTS[] = {"infill", "move to first infill point", NULL};
2023-05-09 13:44:27,922 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:44:27,922 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:67:20: warning: 'SLICER_PE_UNKNOWN_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:44:27,922 ! 67 | static const char* SLICER_PE_UNKNOWN_PERIMETER_COMMENTS[] = {"perimeter", "move to first perimeter point", NULL};
2023-05-09 13:44:27,923 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:44:27,923 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:64:20: warning: 'SLICER_PE_INNER_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:44:27,923 ! 64 | static const char* SLICER_PE_INNER_PERIMETER_COMMENTS[] = {
2023-05-09 13:44:27,923 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:44:27,923 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:61:20: warning: 'SLICER_PE_OUTER_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:44:27,923 ! 61 | static const char* SLICER_PE_OUTER_PERIMETER_COMMENTS[] = {
2023-05-09 13:44:27,923 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:44:27,923 ! error: command '/usr/bin/gcc' failed with exit code 1
2023-05-09 13:44:27,924 ! [end of output]
2023-05-09 13:44:27,924 ! 
2023-05-09 13:44:27,924 ! note: This error originates from a subprocess, and is likely not a problem with pip.
2023-05-09 13:44:27,924 ! error: legacy-install-failure
2023-05-09 13:44:27,924 ! 
2023-05-09 13:44:27,924 ! × Encountered error while trying to install package.
2023-05-09 13:44:27,924 ! ╰─> Octolapse
2023-05-09 13:44:27,925 ! 
2023-05-09 13:44:27,925 ! note: This is an issue with the package mentioned above, not pip.
2023-05-09 13:44:27,925 ! hint: See above for output from the failure.
2023-05-09 13:44:27,929 * Looks like the plugin was already installed. Forcing a reinstall.
2023-05-09 13:44:27,933   /usr/bin/python3 -m pip --disable-pip-version-check install file:///tmp/tmpj0pc59zp/Octolapse-master.zip --no-cache-dir --ignore-installed --force-reinstall --no-deps
2023-05-09 13:44:32,258 > Processing /tmp/tmpj0pc59zp/Octolapse-master.zip
2023-05-09 13:44:33,507 > Preparing metadata (setup.py): started
2023-05-09 13:44:45,038 > Preparing metadata (setup.py): finished with status 'done'
2023-05-09 13:44:45,039 > Installing collected packages: Octolapse
2023-05-09 13:44:45,039 > Running setup.py install for Octolapse: started
2023-05-09 13:44:45,542 ! DEPRECATION: Octolapse is being installed using the legacy 'setup.py install' method, because it does not have a 'pyproject.toml' and the 'wheel' package is not installed. pip 23.1 will enforce this behaviour change. A possible replacement is to enable the '--use-pep517' option. Discussion can be found at https://github.com/pypa/pip/issues/8559
2023-05-09 13:45:44,197 > Running setup.py install for Octolapse: finished with status 'error'
2023-05-09 13:45:44,824 ! error: subprocess-exited-with-error
2023-05-09 13:45:44,825 ! 
2023-05-09 13:45:44,825 ! × Running setup.py install for Octolapse did not run successfully.
2023-05-09 13:45:44,825 ! │ exit code: 1
2023-05-09 13:45:44,825 ! ╰─> [1152 lines of output]
2023-05-09 13:45:44,826 ! likely tags: v0.4.2
2023-05-09 13:45:44,826 ! picking v0.4.2
2023-05-09 13:45:44,826 ! got version from expanded keyword {'version': 'v0.4.2', 'full-revisionid': 'c6c86782cdbfc3590fa4b1bf2e63064eb459b16b', 'dirty': False, 'error': None, 'date': '2023-04-02T10:23:21-0500'}
2023-05-09 13:45:44,826 ! Argon2 passlib backend is not available, not using it for password hashing
2023-05-09 13:45:44,827 ! /tmp/pip-req-build-tyq0noos/setup.py:58: DeprecationWarning: distutils Version classes are deprecated. Use packaging.version instead.
2023-05-09 13:45:44,827 ! if LooseVersion(octoprint.server.VERSION) < LooseVersion("1.4"):
2023-05-09 13:45:44,827 ! Found packages: {'octoprint_octolapse_setuptools', 'octoprint_octolapse.test', 'octoprint_octolapse'}
2023-05-09 13:45:44,827 ! running install
2023-05-09 13:45:44,828 ! /usr/lib/python3.10/site-packages/setuptools/command/install.py:34: SetuptoolsDeprecationWarning: setup.py install is deprecated. Use build and pip and other standards-based tools.
2023-05-09 13:45:44,828 ! warnings.warn(
2023-05-09 13:45:44,828 ! running build
2023-05-09 13:45:44,829 ! running build_py
2023-05-09 13:45:44,833 ! creating build
2023-05-09 13:45:44,835 ! creating build/lib.linux-aarch64-cpython-310
2023-05-09 13:45:44,837 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse_setuptools
2023-05-09 13:45:44,838 ! copying octoprint_octolapse_setuptools/__init__.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse_setuptools
2023-05-09 13:45:44,839 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:45:44,840 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:45:44,841 ! copying octoprint_octolapse/test/test_settings.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:45:44,843 ! copying octoprint_octolapse/test/test_trigger_layer.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:45:44,843 ! copying octoprint_octolapse/test/__init__.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:45:44,843 ! copying octoprint_octolapse/test/test_extruder.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:45:44,844 ! copying octoprint_octolapse/test/test_parsing.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:45:44,844 ! copying octoprint_octolapse/test/test_render.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:45:44,845 ! copying octoprint_octolapse/test/test_timelapse.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:45:44,847 ! copying octoprint_octolapse/test/test_intersection.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:45:44,847 ! copying octoprint_octolapse/test/test_trigger_gcode.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:45:44,847 ! copying octoprint_octolapse/test/testing_utilities.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:45:44,848 ! copying octoprint_octolapse/test/test_octolapseplugin.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:45:44,848 ! copying octoprint_octolapse/test/test_position.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:45:44,848 ! copying octoprint_octolapse/test/test_trigger_timer.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:45:44,848 ! copying octoprint_octolapse/test/test_command.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:45:44,849 ! copying octoprint_octolapse/test/test_settings_slicer.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:45:44,849 ! copying octoprint_octolapse/test/test_utility.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:45:44,849 ! copying octoprint_octolapse/test/test_snapshotGcode.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:45:44,849 ! copying octoprint_octolapse/test/test_migration_version.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:45:44,850 ! copying octoprint_octolapse/test/test_trigger.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:45:44,850 ! copying octoprint_octolapse/snapshot.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:45:44,850 ! copying octoprint_octolapse/log.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:45:44,850 ! copying octoprint_octolapse/__init__.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:45:44,851 ! copying octoprint_octolapse/messenger_worker.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:45:44,851 ! copying octoprint_octolapse/gcode_processor.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:45:44,851 ! copying octoprint_octolapse/gcode_commands.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:45:44,851 ! copying octoprint_octolapse/camera.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:45:44,853 ! copying octoprint_octolapse/position.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:45:44,854 ! copying octoprint_octolapse/stabilization_preprocessing.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:45:44,855 ! copying octoprint_octolapse/utility.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:45:44,855 ! copying octoprint_octolapse/settings_external.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:45:44,855 ! copying octoprint_octolapse/render.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:45:44,856 ! copying octoprint_octolapse/settings_preprocessor.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:45:44,856 ! copying octoprint_octolapse/script.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:45:44,856 ! copying octoprint_octolapse/migration.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:45:44,856 ! copying octoprint_octolapse/_version.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:45:44,857 ! copying octoprint_octolapse/stabilization_gcode.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:45:44,857 ! copying octoprint_octolapse/settings.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:45:44,857 ! copying octoprint_octolapse/error_messages.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:45:44,857 ! copying octoprint_octolapse/trigger.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:45:44,858 ! copying octoprint_octolapse/timelapse.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:45:44,858 ! running egg_info
2023-05-09 13:45:44,858 ! creating Octolapse.egg-info
2023-05-09 13:45:44,858 ! writing Octolapse.egg-info/PKG-INFO
2023-05-09 13:45:44,859 ! writing dependency_links to Octolapse.egg-info/dependency_links.txt
2023-05-09 13:45:44,859 ! writing entry points to Octolapse.egg-info/entry_points.txt
2023-05-09 13:45:44,859 ! writing requirements to Octolapse.egg-info/requires.txt
2023-05-09 13:45:44,859 ! writing top-level names to Octolapse.egg-info/top_level.txt
2023-05-09 13:45:44,860 ! writing manifest file 'Octolapse.egg-info/SOURCES.txt'
2023-05-09 13:45:44,860 ! reading manifest file 'Octolapse.egg-info/SOURCES.txt'
2023-05-09 13:45:44,860 ! reading manifest template 'MANIFEST.in'
2023-05-09 13:45:44,860 ! warning: no files found matching 'README.md'
2023-05-09 13:45:44,860 ! warning: no files found matching '*' under directory 'octoprint_octolapse/translations'
2023-05-09 13:45:44,861 ! warning: no files found matching '*' under directory 'octoprint_octolapse/data/images'
2023-05-09 13:45:44,861 ! adding license file 'LICENSE'
2023-05-09 13:45:44,861 ! writing manifest file 'Octolapse.egg-info/SOURCES.txt'
2023-05-09 13:45:44,861 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data' as data is deprecated, please list it in `packages`.
2023-05-09 13:45:44,862 ! !!
2023-05-09 13:45:44,862 ! 
2023-05-09 13:45:44,862 ! 
2023-05-09 13:45:44,862 ! ############################
2023-05-09 13:45:44,862 ! # Package would be ignored #
2023-05-09 13:45:44,863 ! ############################
2023-05-09 13:45:44,863 ! Python recognizes 'octoprint_octolapse.data' as an importable package,
2023-05-09 13:45:44,863 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:45:44,863 ! 
2023-05-09 13:45:44,863 ! 'octoprint_octolapse.data' has been automatically added to the distribution only
2023-05-09 13:45:44,863 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:45:44,864 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:45:44,864 ! 
2023-05-09 13:45:44,864 ! Please make sure that 'octoprint_octolapse.data' is included as a package by using
2023-05-09 13:45:44,864 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:45:44,865 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:45:44,865 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:45:44,865 ! 
2023-05-09 13:45:44,865 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:45:44,865 ! documentation page.
2023-05-09 13:45:44,866 ! 
2023-05-09 13:45:44,866 ! 
2023-05-09 13:45:44,866 ! !!
2023-05-09 13:45:44,866 ! 
2023-05-09 13:45:44,866 ! check.warn(importable)
2023-05-09 13:45:44,867 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.Images' as data is deprecated, please list it in `packages`.
2023-05-09 13:45:44,867 ! !!
2023-05-09 13:45:44,867 ! 
2023-05-09 13:45:44,868 ! 
2023-05-09 13:45:44,868 ! ############################
2023-05-09 13:45:44,868 ! # Package would be ignored #
2023-05-09 13:45:44,869 ! ############################
2023-05-09 13:45:44,869 ! Python recognizes 'octoprint_octolapse.data.Images' as an importable package,
2023-05-09 13:45:44,869 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:45:44,869 ! 
2023-05-09 13:45:44,869 ! 'octoprint_octolapse.data.Images' has been automatically added to the distribution only
2023-05-09 13:45:44,870 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:45:44,870 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:45:44,870 ! 
2023-05-09 13:45:44,870 ! Please make sure that 'octoprint_octolapse.data.Images' is included as a package by using
2023-05-09 13:45:44,871 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:45:44,871 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:45:44,871 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:45:44,871 ! 
2023-05-09 13:45:44,871 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:45:44,872 ! documentation page.
2023-05-09 13:45:44,872 ! 
2023-05-09 13:45:44,872 ! 
2023-05-09 13:45:44,872 ! !!
2023-05-09 13:45:44,873 ! 
2023-05-09 13:45:44,873 ! check.warn(importable)
2023-05-09 13:45:44,873 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.fonts.DejaVu' as data is deprecated, please list it in `packages`.
2023-05-09 13:45:44,873 ! !!
2023-05-09 13:45:44,873 ! 
2023-05-09 13:45:44,874 ! 
2023-05-09 13:45:44,874 ! ############################
2023-05-09 13:45:44,874 ! # Package would be ignored #
2023-05-09 13:45:44,874 ! ############################
2023-05-09 13:45:44,874 ! Python recognizes 'octoprint_octolapse.data.fonts.DejaVu' as an importable package,
2023-05-09 13:45:44,875 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:45:44,875 ! 
2023-05-09 13:45:44,875 ! 'octoprint_octolapse.data.fonts.DejaVu' has been automatically added to the distribution only
2023-05-09 13:45:44,875 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:45:44,875 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:45:44,876 ! 
2023-05-09 13:45:44,876 ! Please make sure that 'octoprint_octolapse.data.fonts.DejaVu' is included as a package by using
2023-05-09 13:45:44,876 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:45:44,876 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:45:44,877 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:45:44,877 ! 
2023-05-09 13:45:44,877 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:45:44,877 ! documentation page.
2023-05-09 13:45:44,877 ! 
2023-05-09 13:45:44,878 ! 
2023-05-09 13:45:44,878 ! !!
2023-05-09 13:45:44,878 ! 
2023-05-09 13:45:44,878 ! check.warn(importable)
2023-05-09 13:45:44,879 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.lib.c' as data is deprecated, please list it in `packages`.
2023-05-09 13:45:44,880 ! !!
2023-05-09 13:45:44,880 ! 
2023-05-09 13:45:44,880 ! 
2023-05-09 13:45:44,881 ! ############################
2023-05-09 13:45:44,881 ! # Package would be ignored #
2023-05-09 13:45:44,881 ! ############################
2023-05-09 13:45:44,881 ! Python recognizes 'octoprint_octolapse.data.lib.c' as an importable package,
2023-05-09 13:45:44,882 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:45:44,882 ! 
2023-05-09 13:45:44,882 ! 'octoprint_octolapse.data.lib.c' has been automatically added to the distribution only
2023-05-09 13:45:44,882 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:45:44,882 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:45:44,883 ! 
2023-05-09 13:45:44,883 ! Please make sure that 'octoprint_octolapse.data.lib.c' is included as a package by using
2023-05-09 13:45:44,883 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:45:44,883 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:45:44,884 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:45:44,884 ! 
2023-05-09 13:45:44,884 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:45:44,884 ! documentation page.
2023-05-09 13:45:44,884 ! 
2023-05-09 13:45:44,885 ! 
2023-05-09 13:45:44,885 ! !!
2023-05-09 13:45:44,885 ! 
2023-05-09 13:45:44,885 ! check.warn(importable)
2023-05-09 13:45:44,886 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.scripts.gcode.cura' as data is deprecated, please list it in `packages`.
2023-05-09 13:45:44,886 ! !!
2023-05-09 13:45:44,886 ! 
2023-05-09 13:45:44,886 ! 
2023-05-09 13:45:44,886 ! ############################
2023-05-09 13:45:44,887 ! # Package would be ignored #
2023-05-09 13:45:44,887 ! ############################
2023-05-09 13:45:44,887 ! Python recognizes 'octoprint_octolapse.data.scripts.gcode.cura' as an importable package,
2023-05-09 13:45:44,887 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:45:44,887 ! 
2023-05-09 13:45:44,888 ! 'octoprint_octolapse.data.scripts.gcode.cura' has been automatically added to the distribution only
2023-05-09 13:45:44,888 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:45:44,888 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:45:44,888 ! 
2023-05-09 13:45:44,888 ! Please make sure that 'octoprint_octolapse.data.scripts.gcode.cura' is included as a package by using
2023-05-09 13:45:44,889 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:45:44,889 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:45:44,889 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:45:44,889 ! 
2023-05-09 13:45:44,890 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:45:44,890 ! documentation page.
2023-05-09 13:45:44,890 ! 
2023-05-09 13:45:44,890 ! 
2023-05-09 13:45:44,890 ! !!
2023-05-09 13:45:44,891 ! 
2023-05-09 13:45:44,891 ! check.warn(importable)
2023-05-09 13:45:44,891 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.scripts.linux' as data is deprecated, please list it in `packages`.
2023-05-09 13:45:44,891 ! !!
2023-05-09 13:45:44,891 ! 
2023-05-09 13:45:44,892 ! 
2023-05-09 13:45:44,892 ! ############################
2023-05-09 13:45:44,892 ! # Package would be ignored #
2023-05-09 13:45:44,892 ! ############################
2023-05-09 13:45:44,893 ! Python recognizes 'octoprint_octolapse.data.scripts.linux' as an importable package,
2023-05-09 13:45:44,893 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:45:44,893 ! 
2023-05-09 13:45:44,893 ! 'octoprint_octolapse.data.scripts.linux' has been automatically added to the distribution only
2023-05-09 13:45:44,894 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:45:44,894 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:45:44,894 ! 
2023-05-09 13:45:44,894 ! Please make sure that 'octoprint_octolapse.data.scripts.linux' is included as a package by using
2023-05-09 13:45:44,894 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:45:44,895 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:45:44,895 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:45:44,895 ! 
2023-05-09 13:45:44,895 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:45:44,895 ! documentation page.
2023-05-09 13:45:44,896 ! 
2023-05-09 13:45:44,896 ! 
2023-05-09 13:45:44,896 ! !!
2023-05-09 13:45:44,896 ! 
2023-05-09 13:45:44,897 ! check.warn(importable)
2023-05-09 13:45:44,897 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.scripts.windows' as data is deprecated, please list it in `packages`.
2023-05-09 13:45:44,897 ! !!
2023-05-09 13:45:44,897 ! 
2023-05-09 13:45:44,898 ! 
2023-05-09 13:45:44,898 ! ############################
2023-05-09 13:45:44,898 ! # Package would be ignored #
2023-05-09 13:45:44,898 ! ############################
2023-05-09 13:45:44,898 ! Python recognizes 'octoprint_octolapse.data.scripts.windows' as an importable package,
2023-05-09 13:45:44,899 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:45:44,899 ! 
2023-05-09 13:45:44,899 ! 'octoprint_octolapse.data.scripts.windows' has been automatically added to the distribution only
2023-05-09 13:45:44,899 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:45:44,899 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:45:44,900 ! 
2023-05-09 13:45:44,900 ! Please make sure that 'octoprint_octolapse.data.scripts.windows' is included as a package by using
2023-05-09 13:45:44,900 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:45:44,900 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:45:44,901 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:45:44,901 ! 
2023-05-09 13:45:44,901 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:45:44,901 ! documentation page.
2023-05-09 13:45:44,901 ! 
2023-05-09 13:45:44,902 ! 
2023-05-09 13:45:44,902 ! !!
2023-05-09 13:45:44,902 ! 
2023-05-09 13:45:44,902 ! check.warn(importable)
2023-05-09 13:45:44,903 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.templates' as data is deprecated, please list it in `packages`.
2023-05-09 13:45:44,903 ! !!
2023-05-09 13:45:44,903 ! 
2023-05-09 13:45:44,903 ! 
2023-05-09 13:45:44,903 ! ############################
2023-05-09 13:45:44,904 ! # Package would be ignored #
2023-05-09 13:45:44,904 ! ############################
2023-05-09 13:45:44,904 ! Python recognizes 'octoprint_octolapse.data.templates' as an importable package,
2023-05-09 13:45:44,904 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:45:44,905 ! 
2023-05-09 13:45:44,905 ! 'octoprint_octolapse.data.templates' has been automatically added to the distribution only
2023-05-09 13:45:44,905 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:45:44,905 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:45:44,906 ! 
2023-05-09 13:45:44,906 ! Please make sure that 'octoprint_octolapse.data.templates' is included as a package by using
2023-05-09 13:45:44,906 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:45:44,906 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:45:44,906 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:45:44,907 ! 
2023-05-09 13:45:44,907 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:45:44,907 ! documentation page.
2023-05-09 13:45:44,907 ! 
2023-05-09 13:45:44,908 ! 
2023-05-09 13:45:44,908 ! !!
2023-05-09 13:45:44,908 ! 
2023-05-09 13:45:44,908 ! check.warn(importable)
2023-05-09 13:45:44,910 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.webcam_types' as data is deprecated, please list it in `packages`.
2023-05-09 13:45:44,910 ! !!
2023-05-09 13:45:44,910 ! 
2023-05-09 13:45:44,910 ! 
2023-05-09 13:45:44,911 ! ############################
2023-05-09 13:45:44,911 ! # Package would be ignored #
2023-05-09 13:45:44,911 ! ############################
2023-05-09 13:45:44,912 ! Python recognizes 'octoprint_octolapse.data.webcam_types' as an importable package,
2023-05-09 13:45:44,912 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:45:44,913 ! 
2023-05-09 13:45:44,914 ! 'octoprint_octolapse.data.webcam_types' has been automatically added to the distribution only
2023-05-09 13:45:44,914 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:45:44,914 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:45:44,915 ! 
2023-05-09 13:45:44,915 ! Please make sure that 'octoprint_octolapse.data.webcam_types' is included as a package by using
2023-05-09 13:45:44,915 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:45:44,915 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:45:44,915 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:45:44,916 ! 
2023-05-09 13:45:44,916 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:45:44,916 ! documentation page.
2023-05-09 13:45:44,916 ! 
2023-05-09 13:45:44,917 ! 
2023-05-09 13:45:44,917 ! !!
2023-05-09 13:45:44,917 ! 
2023-05-09 13:45:44,917 ! check.warn(importable)
2023-05-09 13:45:44,917 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.webcam_types.mjpg_streamer' as data is deprecated, please list it in `packages`.
2023-05-09 13:45:44,918 ! !!
2023-05-09 13:45:44,918 ! 
2023-05-09 13:45:44,918 ! 
2023-05-09 13:45:44,918 ! ############################
2023-05-09 13:45:44,918 ! # Package would be ignored #
2023-05-09 13:45:44,919 ! ############################
2023-05-09 13:45:44,919 ! Python recognizes 'octoprint_octolapse.data.webcam_types.mjpg_streamer' as an importable package,
2023-05-09 13:45:44,919 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:45:44,919 ! 
2023-05-09 13:45:44,919 ! 'octoprint_octolapse.data.webcam_types.mjpg_streamer' has been automatically added to the distribution only
2023-05-09 13:45:44,920 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:45:44,920 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:45:44,920 ! 
2023-05-09 13:45:44,920 ! Please make sure that 'octoprint_octolapse.data.webcam_types.mjpg_streamer' is included as a package by using
2023-05-09 13:45:44,921 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:45:44,921 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:45:44,921 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:45:44,921 ! 
2023-05-09 13:45:44,921 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:45:44,922 ! documentation page.
2023-05-09 13:45:44,922 ! 
2023-05-09 13:45:44,922 ! 
2023-05-09 13:45:44,922 ! !!
2023-05-09 13:45:44,923 ! 
2023-05-09 13:45:44,923 ! check.warn(importable)
2023-05-09 13:45:44,923 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.css' as data is deprecated, please list it in `packages`.
2023-05-09 13:45:44,923 ! !!
2023-05-09 13:45:44,923 ! 
2023-05-09 13:45:44,924 ! 
2023-05-09 13:45:44,924 ! ############################
2023-05-09 13:45:44,924 ! # Package would be ignored #
2023-05-09 13:45:44,924 ! ############################
2023-05-09 13:45:44,925 ! Python recognizes 'octoprint_octolapse.static.css' as an importable package,
2023-05-09 13:45:44,925 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:45:44,925 ! 
2023-05-09 13:45:44,925 ! 'octoprint_octolapse.static.css' has been automatically added to the distribution only
2023-05-09 13:45:44,925 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:45:44,926 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:45:44,926 ! 
2023-05-09 13:45:44,926 ! Please make sure that 'octoprint_octolapse.static.css' is included as a package by using
2023-05-09 13:45:44,926 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:45:44,927 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:45:44,927 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:45:44,927 ! 
2023-05-09 13:45:44,927 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:45:44,927 ! documentation page.
2023-05-09 13:45:44,928 ! 
2023-05-09 13:45:44,928 ! 
2023-05-09 13:45:44,928 ! !!
2023-05-09 13:45:44,928 ! 
2023-05-09 13:45:44,929 ! check.warn(importable)
2023-05-09 13:45:44,929 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.docs.help' as data is deprecated, please list it in `packages`.
2023-05-09 13:45:44,929 ! !!
2023-05-09 13:45:44,929 ! 
2023-05-09 13:45:44,929 ! 
2023-05-09 13:45:44,930 ! ############################
2023-05-09 13:45:44,930 ! # Package would be ignored #
2023-05-09 13:45:44,930 ! ############################
2023-05-09 13:45:44,930 ! Python recognizes 'octoprint_octolapse.static.docs.help' as an importable package,
2023-05-09 13:45:44,931 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:45:44,931 ! 
2023-05-09 13:45:44,931 ! 'octoprint_octolapse.static.docs.help' has been automatically added to the distribution only
2023-05-09 13:45:44,931 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:45:44,931 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:45:44,932 ! 
2023-05-09 13:45:44,932 ! Please make sure that 'octoprint_octolapse.static.docs.help' is included as a package by using
2023-05-09 13:45:44,932 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:45:44,932 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:45:44,932 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:45:44,933 ! 
2023-05-09 13:45:44,933 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:45:44,933 ! documentation page.
2023-05-09 13:45:44,933 ! 
2023-05-09 13:45:44,933 ! 
2023-05-09 13:45:44,934 ! !!
2023-05-09 13:45:44,934 ! 
2023-05-09 13:45:44,934 ! check.warn(importable)
2023-05-09 13:45:44,934 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.img' as data is deprecated, please list it in `packages`.
2023-05-09 13:45:44,935 ! !!
2023-05-09 13:45:44,935 ! 
2023-05-09 13:45:44,935 ! 
2023-05-09 13:45:44,935 ! ############################
2023-05-09 13:45:44,935 ! # Package would be ignored #
2023-05-09 13:45:44,936 ! ############################
2023-05-09 13:45:44,936 ! Python recognizes 'octoprint_octolapse.static.img' as an importable package,
2023-05-09 13:45:44,936 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:45:44,936 ! 
2023-05-09 13:45:44,936 ! 'octoprint_octolapse.static.img' has been automatically added to the distribution only
2023-05-09 13:45:44,937 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:45:44,937 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:45:44,937 ! 
2023-05-09 13:45:44,937 ! Please make sure that 'octoprint_octolapse.static.img' is included as a package by using
2023-05-09 13:45:44,938 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:45:44,938 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:45:44,938 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:45:44,938 ! 
2023-05-09 13:45:44,939 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:45:44,939 ! documentation page.
2023-05-09 13:45:44,939 ! 
2023-05-09 13:45:44,939 ! 
2023-05-09 13:45:44,939 ! !!
2023-05-09 13:45:44,940 ! 
2023-05-09 13:45:44,940 ! check.warn(importable)
2023-05-09 13:45:44,940 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.js' as data is deprecated, please list it in `packages`.
2023-05-09 13:45:44,940 ! !!
2023-05-09 13:45:44,941 ! 
2023-05-09 13:45:44,941 ! 
2023-05-09 13:45:44,941 ! ############################
2023-05-09 13:45:44,941 ! # Package would be ignored #
2023-05-09 13:45:44,941 ! ############################
2023-05-09 13:45:44,942 ! Python recognizes 'octoprint_octolapse.static.js' as an importable package,
2023-05-09 13:45:44,942 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:45:44,942 ! 
2023-05-09 13:45:44,942 ! 'octoprint_octolapse.static.js' has been automatically added to the distribution only
2023-05-09 13:45:44,942 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:45:44,943 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:45:44,943 ! 
2023-05-09 13:45:44,943 ! Please make sure that 'octoprint_octolapse.static.js' is included as a package by using
2023-05-09 13:45:44,943 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:45:44,943 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:45:44,944 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:45:44,944 ! 
2023-05-09 13:45:44,944 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:45:44,944 ! documentation page.
2023-05-09 13:45:44,945 ! 
2023-05-09 13:45:44,946 ! 
2023-05-09 13:45:44,946 ! !!
2023-05-09 13:45:44,946 ! 
2023-05-09 13:45:44,947 ! check.warn(importable)
2023-05-09 13:45:44,947 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.js.webcams.mjpg_streamer' as data is deprecated, please list it in `packages`.
2023-05-09 13:45:44,947 ! !!
2023-05-09 13:45:44,947 ! 
2023-05-09 13:45:44,948 ! 
2023-05-09 13:45:44,948 ! ############################
2023-05-09 13:45:44,948 ! # Package would be ignored #
2023-05-09 13:45:44,948 ! ############################
2023-05-09 13:45:44,949 ! Python recognizes 'octoprint_octolapse.static.js.webcams.mjpg_streamer' as an importable package,
2023-05-09 13:45:44,949 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:45:44,949 ! 
2023-05-09 13:45:44,949 ! 'octoprint_octolapse.static.js.webcams.mjpg_streamer' has been automatically added to the distribution only
2023-05-09 13:45:44,949 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:45:44,950 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:45:44,950 ! 
2023-05-09 13:45:44,950 ! Please make sure that 'octoprint_octolapse.static.js.webcams.mjpg_streamer' is included as a package by using
2023-05-09 13:45:44,950 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:45:44,951 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:45:44,951 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:45:44,951 ! 
2023-05-09 13:45:44,951 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:45:44,952 ! documentation page.
2023-05-09 13:45:44,952 ! 
2023-05-09 13:45:44,952 ! 
2023-05-09 13:45:44,952 ! !!
2023-05-09 13:45:44,952 ! 
2023-05-09 13:45:44,953 ! check.warn(importable)
2023-05-09 13:45:44,953 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.templates' as data is deprecated, please list it in `packages`.
2023-05-09 13:45:44,953 ! !!
2023-05-09 13:45:44,953 ! 
2023-05-09 13:45:44,954 ! 
2023-05-09 13:45:44,954 ! ############################
2023-05-09 13:45:44,954 ! # Package would be ignored #
2023-05-09 13:45:44,954 ! ############################
2023-05-09 13:45:44,954 ! Python recognizes 'octoprint_octolapse.templates' as an importable package,
2023-05-09 13:45:44,955 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:45:44,955 ! 
2023-05-09 13:45:44,955 ! 'octoprint_octolapse.templates' has been automatically added to the distribution only
2023-05-09 13:45:44,955 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:45:44,955 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:45:44,956 ! 
2023-05-09 13:45:44,956 ! Please make sure that 'octoprint_octolapse.templates' is included as a package by using
2023-05-09 13:45:44,956 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:45:44,956 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:45:44,957 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:45:44,957 ! 
2023-05-09 13:45:44,957 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:45:44,957 ! documentation page.
2023-05-09 13:45:44,957 ! 
2023-05-09 13:45:44,958 ! 
2023-05-09 13:45:44,958 ! !!
2023-05-09 13:45:44,958 ! 
2023-05-09 13:45:44,958 ! check.warn(importable)
2023-05-09 13:45:44,958 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.templates.webcams.mjpg_streamer' as data is deprecated, please list it in `packages`.
2023-05-09 13:45:44,959 ! !!
2023-05-09 13:45:44,959 ! 
2023-05-09 13:45:44,959 ! 
2023-05-09 13:45:44,959 ! ############################
2023-05-09 13:45:44,959 ! # Package would be ignored #
2023-05-09 13:45:44,960 ! ############################
2023-05-09 13:45:44,960 ! Python recognizes 'octoprint_octolapse.templates.webcams.mjpg_streamer' as an importable package,
2023-05-09 13:45:44,960 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:45:44,960 ! 
2023-05-09 13:45:44,961 ! 'octoprint_octolapse.templates.webcams.mjpg_streamer' has been automatically added to the distribution only
2023-05-09 13:45:44,961 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:45:44,961 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:45:44,961 ! 
2023-05-09 13:45:44,961 ! Please make sure that 'octoprint_octolapse.templates.webcams.mjpg_streamer' is included as a package by using
2023-05-09 13:45:44,962 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:45:44,962 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:45:44,962 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:45:44,962 ! 
2023-05-09 13:45:44,962 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:45:44,963 ! documentation page.
2023-05-09 13:45:44,963 ! 
2023-05-09 13:45:44,963 ! 
2023-05-09 13:45:44,963 ! !!
2023-05-09 13:45:44,963 ! 
2023-05-09 13:45:44,964 ! check.warn(importable)
2023-05-09 13:45:44,964 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:45:44,964 ! copying octoprint_octolapse/data/settings_default_0.3.3rc3.dev0.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:45:44,964 ! copying octoprint_octolapse/data/settings_default_0.4.0.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:45:44,965 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev0.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:45:44,965 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev2.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:45:44,965 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev3.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:45:44,965 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev4.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:45:44,965 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev5.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:45:44,966 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:45:44,966 ! copying octoprint_octolapse/data/settings_default_0.4.0rc2.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:45:44,966 ! copying octoprint_octolapse/data/settings_default_0.4.0rc3.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:45:44,966 ! copying octoprint_octolapse/data/settings_default_current.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:45:44,966 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 13:45:44,967 ! copying octoprint_octolapse/data/Images/no-camera-selected.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 13:45:44,967 ! copying octoprint_octolapse/data/Images/no-image-available.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 13:45:44,967 ! copying octoprint_octolapse/data/Images/no_snapshot.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 13:45:44,967 ! copying octoprint_octolapse/data/Images/test-snapshot-image.jpg -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 13:45:44,967 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/fonts
2023-05-09 13:45:44,968 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/fonts/DejaVu
2023-05-09 13:45:44,968 ! copying octoprint_octolapse/data/fonts/DejaVu/DejaVuSansMono.ttf -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/fonts/DejaVu
2023-05-09 13:45:44,968 ! copying octoprint_octolapse/data/fonts/DejaVu/license.txt -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/fonts/DejaVu
2023-05-09 13:45:44,968 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib
2023-05-09 13:45:44,969 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:45:44,969 ! copying octoprint_octolapse/data/lib/c/extruder.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:45:44,969 ! copying octoprint_octolapse/data/lib/c/extruder.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:45:44,969 ! copying octoprint_octolapse/data/lib/c/gcode_comment_processor.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:45:44,969 ! copying octoprint_octolapse/data/lib/c/gcode_comment_processor.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:45:44,970 ! copying octoprint_octolapse/data/lib/c/gcode_parser.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:45:44,970 ! copying octoprint_octolapse/data/lib/c/gcode_parser.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:45:44,971 ! copying octoprint_octolapse/data/lib/c/gcode_position.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:45:44,971 ! copying octoprint_octolapse/data/lib/c/gcode_position.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:45:44,971 ! copying octoprint_octolapse/data/lib/c/gcode_position_processor.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:45:44,971 ! copying octoprint_octolapse/data/lib/c/gcode_position_processor.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:45:44,972 ! copying octoprint_octolapse/data/lib/c/logging.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:45:44,972 ! copying octoprint_octolapse/data/lib/c/logging.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:45:44,972 ! copying octoprint_octolapse/data/lib/c/parsed_command.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:45:44,973 ! copying octoprint_octolapse/data/lib/c/parsed_command.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:45:44,973 ! copying octoprint_octolapse/data/lib/c/parsed_command_parameter.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:45:44,973 ! copying octoprint_octolapse/data/lib/c/parsed_command_parameter.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:45:44,973 ! copying octoprint_octolapse/data/lib/c/position.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:45:44,973 ! copying octoprint_octolapse/data/lib/c/position.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:45:44,974 ! copying octoprint_octolapse/data/lib/c/python_helpers.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:45:44,974 ! copying octoprint_octolapse/data/lib/c/python_helpers.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:45:44,974 ! copying octoprint_octolapse/data/lib/c/snapshot_plan.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:45:44,974 ! copying octoprint_octolapse/data/lib/c/snapshot_plan.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:45:44,974 ! copying octoprint_octolapse/data/lib/c/snapshot_plan_step.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:45:44,975 ! copying octoprint_octolapse/data/lib/c/snapshot_plan_step.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:45:44,975 ! copying octoprint_octolapse/data/lib/c/stabilization.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:45:44,975 ! copying octoprint_octolapse/data/lib/c/stabilization.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:45:44,975 ! copying octoprint_octolapse/data/lib/c/stabilization_results.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:45:44,976 ! copying octoprint_octolapse/data/lib/c/stabilization_results.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:45:44,976 ! copying octoprint_octolapse/data/lib/c/stabilization_smart_gcode.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:45:44,976 ! copying octoprint_octolapse/data/lib/c/stabilization_smart_gcode.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:45:44,976 ! copying octoprint_octolapse/data/lib/c/stabilization_smart_layer.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:45:44,977 ! copying octoprint_octolapse/data/lib/c/stabilization_smart_layer.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:45:44,977 ! copying octoprint_octolapse/data/lib/c/stabilization_snap_to_print.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:45:44,977 ! copying octoprint_octolapse/data/lib/c/stabilization_snap_to_print.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:45:44,977 ! copying octoprint_octolapse/data/lib/c/trigger_position.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:45:44,977 ! copying octoprint_octolapse/data/lib/c/trigger_position.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:45:44,978 ! copying octoprint_octolapse/data/lib/c/utilities.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:45:44,978 ! copying octoprint_octolapse/data/lib/c/utilities.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:45:44,978 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts
2023-05-09 13:45:44,978 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode
2023-05-09 13:45:44,978 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:45:44,979 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:45:44,979 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_02_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:45:44,979 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_03_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:45:44,980 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_04_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:45:44,980 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_05_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:45:44,980 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_06_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:45:44,981 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_07_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:45:44,982 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_08_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:45:44,982 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:45:44,982 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:45:44,983 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_02_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:45:44,983 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_03_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:45:44,983 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_04_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:45:44,983 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_05_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:45:44,983 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_06_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:45:44,984 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_07_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:45:44,984 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_08_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:45:44,984 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:45:44,984 ! copying octoprint_octolapse/data/scripts/linux/capture_image_leave_on_camera.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:45:44,985 ! copying octoprint_octolapse/data/scripts/linux/download-from-camera-and-rename.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:45:44,985 ! copying octoprint_octolapse/data/scripts/linux/initialize_dslr.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:45:44,985 ! copying octoprint_octolapse/data/scripts/linux/move_snapshots_to_target.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:45:44,985 ! copying octoprint_octolapse/data/scripts/linux/take_snapshot_and_download.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:45:44,986 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/windows
2023-05-09 13:45:44,986 ! copying octoprint_octolapse/data/scripts/windows/take_snapshot_and_download.bat -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/windows
2023-05-09 13:45:44,986 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/templates
2023-05-09 13:45:44,986 ! copying octoprint_octolapse/data/templates/cura_gcode_settings_template.txt -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/templates
2023-05-09 13:45:44,986 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types
2023-05-09 13:45:44,987 ! copying octoprint_octolapse/data/webcam_types/camera_types.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types
2023-05-09 13:45:44,987 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:45:44,987 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/logitech_c250.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:45:44,987 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/logitech_c920.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:45:44,987 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/logitech_c920_2.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:45:44,988 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/logitech_c920_3.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:45:44,988 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/raspi_cam_v2.1.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:45:44,988 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/raspi_cam_v2.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:45:44,988 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static
2023-05-09 13:45:44,988 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/css
2023-05-09 13:45:44,989 ! copying octoprint_octolapse/static/css/jquery.minicolors.css -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/css
2023-05-09 13:45:44,989 ! copying octoprint_octolapse/static/css/jquery.minicolors.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/css
2023-05-09 13:45:44,989 ! copying octoprint_octolapse/static/css/octolapse.css -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/css
2023-05-09 13:45:44,989 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs
2023-05-09 13:45:44,989 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:44,990 ! copying octoprint_octolapse/static/docs/help/dialog.renderings.in_process.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:44,990 ! copying octoprint_octolapse/static/docs/help/dialog.renderings.unfinished.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:44,990 ! copying octoprint_octolapse/static/docs/help/dialog.timelapse_files.snapshot_archive.import.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:44,990 ! copying octoprint_octolapse/static/docs/help/dialog.timelapse_files.snapshot_archive.tab.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:44,991 ! copying octoprint_octolapse/static/docs/help/dialog.timelapse_files.timelapse.tab.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:44,991 ! copying octoprint_octolapse/static/docs/help/error_help_error_not_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:44,991 ! copying octoprint_octolapse/static/docs/help/error_help_init_automatic_slicer_no_settings_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:44,991 ! copying octoprint_octolapse/static/docs/help/error_help_init_automatic_slicer_settings_missing.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:44,991 ! copying octoprint_octolapse/static/docs/help/error_help_init_before_print_start_camera_script_apply_failed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:44,992 ! copying octoprint_octolapse/static/docs/help/error_help_init_camera_init_test_failed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:44,992 ! copying octoprint_octolapse/static/docs/help/error_help_init_camera_settings_apply_failed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:44,992 ! copying octoprint_octolapse/static/docs/help/error_help_init_cant_print_from_sd.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:44,992 ! copying octoprint_octolapse/static/docs/help/error_help_init_directory_test_failed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:44,992 ! copying octoprint_octolapse/static/docs/help/error_help_init_ffmpeg_not_found_at_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:44,993 ! copying octoprint_octolapse/static/docs/help/error_help_init_ffmpeg_path_not_set.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:44,993 ! copying octoprint_octolapse/static/docs/help/error_help_init_ffmpeg_path_retrieve_exception.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:44,993 ! copying octoprint_octolapse/static/docs/help/error_help_init_incorrect_octoprint_version.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:44,993 ! copying octoprint_octolapse/static/docs/help/error_help_init_incorrect_print_start_state.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:44,993 ! copying octoprint_octolapse/static/docs/help/error_help_init_m114_not_supported.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:44,994 ! copying octoprint_octolapse/static/docs/help/error_help_init_manual_slicer_settings_missing.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:44,994 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_current_job_data_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:44,994 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_current_job_file_data_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:44,994 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_enabled_cameras.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:44,994 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_gcode_filepath_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:44,995 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_printer_profile_exists.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:44,995 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_printer_profile_selected.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:44,995 ! copying octoprint_octolapse/static/docs/help/error_help_init_octolapse_is_disabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:44,995 ! copying octoprint_octolapse/static/docs/help/error_help_init_overlay_font_path_not_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:44,995 ! copying octoprint_octolapse/static/docs/help/error_help_init_printer_not_configured.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:44,996 ! copying octoprint_octolapse/static/docs/help/error_help_init_rendering_file_template_invalid.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:44,996 ! copying octoprint_octolapse/static/docs/help/error_help_init_timelapse_start_exception.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:44,996 ! copying octoprint_octolapse/static/docs/help/error_help_init_too_few_extruders_defined.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:44,996 ! copying octoprint_octolapse/static/docs/help/error_help_init_too_few_extruders_offsets_defined.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:44,997 ! copying octoprint_octolapse/static/docs/help/error_help_init_unable_to_accept_snapshot_plan.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:44,997 ! copying octoprint_octolapse/static/docs/help/error_help_init_unexpected_exception.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:44,997 ! copying octoprint_octolapse/static/docs/help/error_help_init_unknown_file_origin.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:44,997 ! copying octoprint_octolapse/static/docs/help/error_help_not_a_valid_error_dict.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:44,997 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_axis_mode_e_unknown.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:44,998 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_axis_mode_xyz_unknown.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:44,998 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_incorrect_trigger_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:44,998 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_no_definite_position.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:44,998 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_no_metric_units.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:44,998 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_no_snapshot_commands_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:44,999 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_no_snapshot_plans_returned.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:44,999 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_printer_not_primed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:44,999 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_unhandled_exception.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:44,999 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_unknown_trigger_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:44,999 ! copying octoprint_octolapse/static/docs/help/error_help_rendering_archive_import_no_files_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,000 ! copying octoprint_octolapse/static/docs/help/error_help_rendering_archive_import_zip_file_corrupt.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,000 ! copying octoprint_octolapse/static/docs/help/error_help_rendering_archive_import_zip_file_too_large.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,000 ! copying octoprint_octolapse/static/docs/help/error_help_settings_slicer_simplify3d_duplicate_toolhead_numbers.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,000 ! copying octoprint_octolapse/static/docs/help/error_help_settings_slicer_simplify3d_extruder_count_mismatch.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,000 ! copying octoprint_octolapse/static/docs/help/error_help_settings_slicer_simplify3d_max_extruder_count_exceeded.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,001 ! copying octoprint_octolapse/static/docs/help/error_help_settings_slicer_simplify3d_unexpected_max_toolhead_number.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,001 ! copying octoprint_octolapse/static/docs/help/error_help_timelapse_cannot_aquire_job_lock.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,001 ! copying octoprint_octolapse/static/docs/help/main_settings.auto_reload_frames.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,001 ! copying octoprint_octolapse/static/docs/help/main_settings.auto_reload_latest_snapshot.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,001 ! copying octoprint_octolapse/static/docs/help/main_settings.automatic_update_interval_days.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,002 ! copying octoprint_octolapse/static/docs/help/main_settings.automatic_updates_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,002 ! copying octoprint_octolapse/static/docs/help/main_settings.cancel_print_on_startup_error.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,002 ! copying octoprint_octolapse/static/docs/help/main_settings.enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,002 ! copying octoprint_octolapse/static/docs/help/main_settings.is_test_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,002 ! copying octoprint_octolapse/static/docs/help/main_settings.preview_snapshot_plan_autoclose.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,003 ! copying octoprint_octolapse/static/docs/help/main_settings.preview_snapshot_plan_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,003 ! copying octoprint_octolapse/static/docs/help/main_settings.preview_snapshot_plans.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,003 ! copying octoprint_octolapse/static/docs/help/main_settings.show_extruder_state_changes.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,003 ! copying octoprint_octolapse/static/docs/help/main_settings.show_navbar_icon.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,003 ! copying octoprint_octolapse/static/docs/help/main_settings.show_navbar_when_not_printing.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,004 ! copying octoprint_octolapse/static/docs/help/main_settings.show_position_changes.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,004 ! copying octoprint_octolapse/static/docs/help/main_settings.show_printer_state_changes.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,004 ! copying octoprint_octolapse/static/docs/help/main_settings.show_snapshot_plan_information.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,004 ! copying octoprint_octolapse/static/docs/help/main_settings.show_trigger_state_changes.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,005 ! copying octoprint_octolapse/static/docs/help/main_settings.snapshot_archive_directory.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,005 ! copying octoprint_octolapse/static/docs/help/main_settings.temporary_directory.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,005 ! copying octoprint_octolapse/static/docs/help/main_settings.timelapse_directory.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,005 ! copying octoprint_octolapse/static/docs/help/profiles.camera.apply_settings_at_startup.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,005 ! copying octoprint_octolapse/static/docs/help/profiles.camera.apply_settings_before_print.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,006 ! copying octoprint_octolapse/static/docs/help/profiles.camera.apply_settings_when_disabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,006 ! copying octoprint_octolapse/static/docs/help/profiles.camera.camera_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,006 ! copying octoprint_octolapse/static/docs/help/profiles.camera.delay.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,006 ! copying octoprint_octolapse/static/docs/help/profiles.camera.edit_cutsom_image_preferences.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,006 ! copying octoprint_octolapse/static/docs/help/profiles.camera.external_camera_snapshot_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,007 ! copying octoprint_octolapse/static/docs/help/profiles.camera.gcode_camera_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,007 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_after_render_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,007 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_after_snapshot_gcode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,007 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_after_snapshot_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,007 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_before_render_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,008 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_before_snapshot_gcode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,008 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_before_snapshot_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,008 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_print_end_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,008 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_print_start_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,008 ! copying octoprint_octolapse/static/docs/help/profiles.camera.snapshot_transpose.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,009 ! copying octoprint_octolapse/static/docs/help/profiles.camera.stream_template.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,009 ! copying octoprint_octolapse/static/docs/help/profiles.camera.timeout_ms.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,009 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.address.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,009 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.enable_custom_image_preferences.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,009 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.ignore_ssl_error.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,009 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.1.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,010 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029518.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,010 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029519.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,010 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029538.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,010 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029670.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,010 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029671.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,011 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029675.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,012 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094849.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,012 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094850.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,012 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094851.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,013 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094856.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,013 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094857.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,013 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094858.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,013 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094860.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,014 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094861.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,014 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094867.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,014 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094868.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,014 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094870.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,014 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094871.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,015 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094872.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,015 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094873.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,015 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094874.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,015 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10291459.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,015 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963776.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,016 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963777.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,016 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963778.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,016 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963788.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,016 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963790.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,016 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963791.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,017 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963795.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,017 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963796.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,017 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963797.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,017 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963800.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,017 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963802.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,018 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963803.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,018 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963804.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,018 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963807.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,018 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963810.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,018 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963818.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,019 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.password.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,019 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.snapshot_request_template.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,019 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.stream_download.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,019 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.username.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,019 ! copying octoprint_octolapse/static/docs/help/profiles.library.is_custom.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,020 ! copying octoprint_octolapse/static/docs/help/profiles.logging.enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,020 ! copying octoprint_octolapse/static/docs/help/profiles.logging.log_all_errors.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,020 ! copying octoprint_octolapse/static/docs/help/profiles.logging.log_to_console.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,020 ! copying octoprint_octolapse/static/docs/help/profiles.logging.logging_level.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,020 ! copying octoprint_octolapse/static/docs/help/profiles.logging.manage_log_files.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,021 ! copying octoprint_octolapse/static/docs/help/profiles.logging.modules_to_log.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,021 ! copying octoprint_octolapse/static/docs/help/profiles.printer.auto_detect_position.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,021 ! copying octoprint_octolapse/static/docs/help/profiles.printer.auto_position_detection_commands.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,021 ! copying octoprint_octolapse/static/docs/help/profiles.printer.automatic_configuration.is_automatic.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,021 ! copying octoprint_octolapse/static/docs/help/profiles.printer.automatic_configuration.make.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,022 ! copying octoprint_octolapse/static/docs/help/profiles.printer.automatic_configuration.model.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,022 ! copying octoprint_octolapse/static/docs/help/profiles.printer.bed_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,022 ! copying octoprint_octolapse/static/docs/help/profiles.printer.custom_bounding_box.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,022 ! copying octoprint_octolapse/static/docs/help/profiles.printer.default_extruder.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,022 ! copying octoprint_octolapse/static/docs/help/profiles.printer.default_firmware_retractions.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,023 ! copying octoprint_octolapse/static/docs/help/profiles.printer.default_firmware_retractions_zhop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,023 ! copying octoprint_octolapse/static/docs/help/profiles.printer.e_axis_default_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,023 ! copying octoprint_octolapse/static/docs/help/profiles.printer.extruder_offsets.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,023 ! copying octoprint_octolapse/static/docs/help/profiles.printer.g90_influences_extruder.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,023 ! copying octoprint_octolapse/static/docs/help/profiles.printer.gocde_axis_compatibility_mode_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,024 ! copying octoprint_octolapse/static/docs/help/profiles.printer.home_axis_gcode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,024 ! copying octoprint_octolapse/static/docs/help/profiles.printer.invert_e.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,024 ! copying octoprint_octolapse/static/docs/help/profiles.printer.invert_x.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,024 ! copying octoprint_octolapse/static/docs/help/profiles.printer.invert_y.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,024 ! copying octoprint_octolapse/static/docs/help/profiles.printer.invert_z.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,025 ! copying octoprint_octolapse/static/docs/help/profiles.printer.minimum_layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,025 ! copying octoprint_octolapse/static/docs/help/profiles.printer.num_extruders.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,025 ! copying octoprint_octolapse/static/docs/help/profiles.printer.origin_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,025 ! copying octoprint_octolapse/static/docs/help/profiles.printer.override_octoprint_profile_settings.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,026 ! copying octoprint_octolapse/static/docs/help/profiles.printer.priming_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,026 ! copying octoprint_octolapse/static/docs/help/profiles.printer.restrict_snapshot_area.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,026 ! copying octoprint_octolapse/static/docs/help/profiles.printer.shared_extruder.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,026 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicer_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,026 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.automatic.continue_on_failure.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,027 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.automatic.disable_automatic_save.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,027 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.4_2.speed_z_hop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,027 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,027 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.max_feedrate_z_override.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,027 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_amount.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,028 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_enable.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,028 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_hop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,028 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_hop_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,028 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_prime_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,028 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_retract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,029 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.smooth_spiralized_contours.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,029 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.speed_travel.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,029 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.axis_speed_display_unit_options.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,029 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.deretract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,030 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,030 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.retract_before_move.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,030 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.retract_length.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,030 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.retract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,030 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.travel_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,030 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.vase_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,031 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.z_hop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,031 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.z_travel_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,031 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.extruder_use_retract.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,031 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,031 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.retraction_distance.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,032 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.retraction_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,032 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.retraction_vertical_lift.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,032 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.vase_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,032 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.x_y_axis_movement_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,032 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.z_axis_movement_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,033 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.deretract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,033 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,033 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.retract_length.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,033 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.retract_lift.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,033 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.retract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,034 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.travel_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,034 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.vase_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,034 ! copying octoprint_octolapse/static/docs/help/profiles.printer.snapshot_command.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,034 ! copying octoprint_octolapse/static/docs/help/profiles.printer.suppress_snapshot_command_always.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,034 ! copying octoprint_octolapse/static/docs/help/profiles.printer.units_default.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,035 ! copying octoprint_octolapse/static/docs/help/profiles.printer.xyz_axes_default_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,035 ! copying octoprint_octolapse/static/docs/help/profiles.printer.zero_based_extruder.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,035 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.archive_snapshots.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,035 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.bitrate.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,035 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.constant_rate_factor.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,036 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.enable_watermark.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,036 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,036 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.fps.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,036 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.fps_calculation_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,036 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.max_fps.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,037 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.min_fps.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,037 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.output_format.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,037 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.output_template.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,037 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_font_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,037 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_font_size.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,038 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_outline_color.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,038 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_outline_width.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,038 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_preview.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,038 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_alignment.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,038 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_color.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,039 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_halign.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,039 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_pos_xy.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,039 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_template.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,039 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_template_current_time.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,040 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_template_time_elapsed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,040 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_valign.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,040 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.post_roll_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,040 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.pre_roll_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,041 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.run_length_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,041 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.thread_count.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,041 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.wait_for_moves_to_finish.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,042 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_fixed_coordinate.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,043 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_fixed_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,043 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_fixed_path_invert_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,043 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_fixed_path_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,043 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_relative.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,044 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_relative_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,044 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_relative_path_invert_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,044 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_relative_path_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,044 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,045 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_fixed_coordinate.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,045 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_fixed_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,045 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_fixed_path_invert_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,045 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_fixed_path_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,046 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_relative.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,046 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_relative_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,046 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_relative_path_invert_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,046 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_relative_path_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,046 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,047 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.calculate_intersections.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,047 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.extruder_state_requirements_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,047 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.layer_trigger_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,047 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.position_restriction_shape.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,047 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.position_restriction_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,048 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.position_restrictions_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,048 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.require_zhop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,048 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.smart_layer_disable_z_lift.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,048 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.smart_layer_snap_to_print_high_quality.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,049 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.smart_layer_snap_to_print_smooth.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,049 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.smart_layer_trigger_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,049 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.timer_trigger_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,049 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.trigger_subtype.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,049 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.trigger_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,050 ! copying octoprint_octolapse/static/docs/help/quality_issues_fast_trigger.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,050 ! copying octoprint_octolapse/static/docs/help/quality_issues_low_quality_snap_to_print.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,050 ! copying octoprint_octolapse/static/docs/help/quality_issues_no_print_features_detected.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,050 ! copying octoprint_octolapse/static/docs/help/settings.import.import_method.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,050 ! copying octoprint_octolapse/static/docs/help/settings.import.import_text.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,051 ! copying octoprint_octolapse/static/docs/help/snapshot_plan_missed_snapshots.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:45:45,051 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/img
2023-05-09 13:45:45,051 ! copying octoprint_octolapse/static/img/watermark.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/img
2023-05-09 13:45:45,051 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:45:45,051 ! copying octoprint_octolapse/static/js/jquery.minicolors.min.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:45:45,052 ! copying octoprint_octolapse/static/js/jquery.validate.min.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:45:45,052 ! copying octoprint_octolapse/static/js/octolapse.dialog.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:45:45,052 ! copying octoprint_octolapse/static/js/octolapse.dialog.renderings.in_process.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:45:45,052 ! copying octoprint_octolapse/static/js/octolapse.dialog.renderings.unfinished.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:45:45,052 ! copying octoprint_octolapse/static/js/octolapse.dialog.timelapse_files.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:45:45,053 ! copying octoprint_octolapse/static/js/octolapse.file_browser.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:45:45,053 ! copying octoprint_octolapse/static/js/octolapse.help.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:45:45,053 ! copying octoprint_octolapse/static/js/octolapse.helpers.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:45:45,053 ! copying octoprint_octolapse/static/js/octolapse.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:45:45,053 ! copying octoprint_octolapse/static/js/octolapse.profiles.camera.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:45:45,054 ! copying octoprint_octolapse/static/js/octolapse.profiles.camera.webcam.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:45:45,054 ! copying octoprint_octolapse/static/js/octolapse.profiles.camera.webcam.mjpg_streamer.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:45:45,054 ! copying octoprint_octolapse/static/js/octolapse.profiles.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:45:45,054 ! copying octoprint_octolapse/static/js/octolapse.profiles.library.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:45:45,054 ! copying octoprint_octolapse/static/js/octolapse.profiles.logging.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:45:45,055 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:45:45,055 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.slicer.cura.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:45:45,055 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.slicer.other.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:45:45,055 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.slicer.simplify_3d.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:45:45,055 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.slicer.slic3r_pe.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:45:45,056 ! copying octoprint_octolapse/static/js/octolapse.profiles.rendering.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:45:45,056 ! copying octoprint_octolapse/static/js/octolapse.profiles.stabilization.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:45:45,056 ! copying octoprint_octolapse/static/js/octolapse.profiles.trigger.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:45:45,056 ! copying octoprint_octolapse/static/js/octolapse.settings.import.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:45:45,056 ! copying octoprint_octolapse/static/js/octolapse.settings.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:45:45,057 ! copying octoprint_octolapse/static/js/octolapse.settings.main.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:45:45,057 ! copying octoprint_octolapse/static/js/octolapse.status.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:45:45,057 ! copying octoprint_octolapse/static/js/octolapse.status.snapshotplan.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:45:45,057 ! copying octoprint_octolapse/static/js/octolapse.status.snapshotplan_preview.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:45:45,057 ! copying octoprint_octolapse/static/js/showdown.min.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:45:45,058 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js/webcams
2023-05-09 13:45:45,058 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js/webcams/mjpg_streamer
2023-05-09 13:45:45,058 ! copying octoprint_octolapse/static/js/webcams/mjpg_streamer/raspi_cam_v2.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js/webcams/mjpg_streamer
2023-05-09 13:45:45,058 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:45:45,058 ! copying octoprint_octolapse/templates/octolapse_dialog.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:45:45,059 ! copying octoprint_octolapse/templates/octolapse_dialog_rendering_in_process.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:45:45,059 ! copying octoprint_octolapse/templates/octolapse_dialog_rendering_unfinished.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:45:45,059 ! copying octoprint_octolapse/templates/octolapse_dialog_timelapse_files.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:45:45,059 ! copying octoprint_octolapse/templates/octolapse_file_browser.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:45:45,059 ! copying octoprint_octolapse/templates/octolapse_helpers.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:45:45,060 ! copying octoprint_octolapse/templates/octolapse_navbar.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:45:45,060 ! copying octoprint_octolapse/templates/octolapse_profile_dialog_add_edit.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:45:45,060 ! copying octoprint_octolapse/templates/octolapse_profiles.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:45:45,060 ! copying octoprint_octolapse/templates/octolapse_profiles_camera.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:45:45,060 ! copying octoprint_octolapse/templates/octolapse_profiles_camera_webcam.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:45:45,061 ! copying octoprint_octolapse/templates/octolapse_profiles_camera_webcam_mjpg_streamer.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:45:45,061 ! copying octoprint_octolapse/templates/octolapse_profiles_library.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:45:45,061 ! copying octoprint_octolapse/templates/octolapse_profiles_logging.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:45:45,061 ! copying octoprint_octolapse/templates/octolapse_profiles_printer.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:45:45,061 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_automatic.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:45:45,062 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_automatic.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:45:45,062 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_cura.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:45:45,062 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_cura_4.2.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:45:45,062 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_other.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:45:45,062 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_simplify3d.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:45:45,063 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_slic3r_pe.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:45:45,063 ! copying octoprint_octolapse/templates/octolapse_profiles_rendering.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:45:45,063 ! copying octoprint_octolapse/templates/octolapse_profiles_stabilization.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:45:45,063 ! copying octoprint_octolapse/templates/octolapse_profiles_trigger.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:45:45,063 ! copying octoprint_octolapse/templates/octolapse_settings.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:45:45,064 ! copying octoprint_octolapse/templates/octolapse_settings_import.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:45:45,064 ! copying octoprint_octolapse/templates/octolapse_settings_main.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:45:45,064 ! copying octoprint_octolapse/templates/octolapse_snapshot_plan.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:45:45,064 ! copying octoprint_octolapse/templates/octolapse_status_extruder.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:45:45,064 ! copying octoprint_octolapse/templates/octolapse_status_position.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:45:45,065 ! copying octoprint_octolapse/templates/octolapse_status_printer_state.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:45:45,065 ! copying octoprint_octolapse/templates/octolapse_status_snapshot_plan.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:45:45,065 ! copying octoprint_octolapse/templates/octolapse_status_triggers.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:45:45,065 ! copying octoprint_octolapse/templates/octolapse_tab.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:45:45,065 ! copying octoprint_octolapse/templates/octolapse_tab_latest_snapshot.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:45:45,066 ! copying octoprint_octolapse/templates/octolapse_tab_settings_current.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:45:45,066 ! copying octoprint_octolapse/templates/octolapse_tab_settings_current_cameras.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:45:45,066 ! copying octoprint_octolapse/templates/octolapse_tab_snapshot_plan_preview_popup.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:45:45,066 ! copying octoprint_octolapse/templates/octolapse_tab_webcam_settings_popup.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:45:45,066 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams
2023-05-09 13:45:45,067 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams/mjpg_streamer
2023-05-09 13:45:45,067 ! copying octoprint_octolapse/templates/webcams/mjpg_streamer/logitech_c250.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams/mjpg_streamer
2023-05-09 13:45:45,067 ! copying octoprint_octolapse/templates/webcams/mjpg_streamer/logitech_c920.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams/mjpg_streamer
2023-05-09 13:45:45,067 ! copying octoprint_octolapse/templates/webcams/mjpg_streamer/raspi_cam_v2.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams/mjpg_streamer
2023-05-09 13:45:45,067 ! UPDATING build/lib.linux-aarch64-cpython-310/octoprint_octolapse/_version.py
2023-05-09 13:45:45,068 ! set build/lib.linux-aarch64-cpython-310/octoprint_octolapse/_version.py to 'v0.4.2'
2023-05-09 13:45:45,068 ! running build_ext
2023-05-09 13:45:45,068 ! Compiling Octolapse Parser Extension with <distutils.unixccompiler.UnixCCompiler object at 0x7c4c932920>.
2023-05-09 13:45:45,068 ! building 'GcodePositionProcessor' extension
2023-05-09 13:45:45,069 ! creating build/temp.linux-aarch64-cpython-310
2023-05-09 13:45:45,069 ! creating build/temp.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:45:45,069 ! creating build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:45:45,069 ! creating build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib
2023-05-09 13:45:45,069 ! creating build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:45:45,070 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/extruder.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/extruder.o -O3 -std=c++11
2023-05-09 13:45:45,070 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/gcode_comment_processor.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/gcode_comment_processor.o -O3 -std=c++11
2023-05-09 13:45:45,070 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.cpp: In member function 'void gcode_comment_processor::update_feature_from_section(position&) const':
2023-05-09 13:45:45,070 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.cpp:99:16: warning: enumeration value 'section_type_no_section' not handled in switch [-Wswitch]
2023-05-09 13:45:45,070 ! 99 |         switch (current_section_)
2023-05-09 13:45:45,071 ! |                ^
2023-05-09 13:45:45,071 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/gcode_parser.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/gcode_parser.o -O3 -std=c++11
2023-05-09 13:45:45,071 ! octoprint_octolapse/data/lib/c/gcode_parser.cpp: In member function 'bool gcode_parser::try_parse_gcode(const char*, parsed_command&)':
2023-05-09 13:45:45,071 ! octoprint_octolapse/data/lib/c/gcode_parser.cpp:148:47: warning: suggest parentheses around '&&' within '||' [-Wparentheses]
2023-05-09 13:45:45,071 ! 148 |     else if (cur_char > 32 || cur_char == ' ' && has_seen_character)
2023-05-09 13:45:45,072 ! |                               ~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:45:45,072 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/gcode_position.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/gcode_position.o -O3 -std=c++11
2023-05-09 13:45:45,072 ! octoprint_octolapse/data/lib/c/gcode_position.cpp: In member function 'void gcode_position::add_position(position&)':
2023-05-09 13:45:45,072 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:395:12: warning: operation on '((gcode_position*)this)->gcode_position::cur_pos_' may be undefined [-Wsequence-point]
2023-05-09 13:45:45,072 ! 395 |   cur_pos_ = (++cur_pos_) % NUM_POSITIONS;
2023-05-09 13:45:45,073 ! octoprint_octolapse/data/lib/c/gcode_position.cpp: In member function 'void gcode_position::add_position(parsed_command&)':
2023-05-09 13:45:45,073 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:402:12: warning: operation on '((gcode_position*)this)->gcode_position::cur_pos_' may be undefined [-Wsequence-point]
2023-05-09 13:45:45,073 ! 402 |   cur_pos_ = (++cur_pos_) % NUM_POSITIONS;
2023-05-09 13:45:45,073 ! octoprint_octolapse/data/lib/c/gcode_position.cpp: In member function 'void gcode_position::update(parsed_command&, long int, long int, long int)':
2023-05-09 13:45:45,073 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:659:31: warning: comparison of integer expressions of different signedness: 'const unsigned int' and 'int' [-Wsign-compare]
2023-05-09 13:45:45,074 ! 659 |                 if (increment > p_current_pos->height_increment && increment > 1)
2023-05-09 13:45:45,074 ! |                     ~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:45:45,074 ! octoprint_octolapse/data/lib/c/gcode_position.cpp: In member function 'void gcode_position::process_g10(position*, parsed_command&)':
2023-05-09 13:45:45,074 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:952:10: warning: variable 's' set but not used [-Wunused-but-set-variable]
2023-05-09 13:45:45,074 ! 952 |   double s = 0;
2023-05-09 13:45:45,075 ! |          ^
2023-05-09 13:45:45,075 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:953:8: warning: variable 'has_s' set but not used [-Wunused-but-set-variable]
2023-05-09 13:45:45,075 ! 953 |   bool has_s = false;
2023-05-09 13:45:45,075 ! |        ^~~~~
2023-05-09 13:45:45,075 ! In file included from octoprint_octolapse/data/lib/c/gcode_position.h:29,
2023-05-09 13:45:45,075 ! from octoprint_octolapse/data/lib/c/gcode_position.cpp:22:
2023-05-09 13:45:45,076 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h: At global scope:
2023-05-09 13:45:45,076 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:77:20: warning: 'SLICER_PE_SKIRT_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:45:45,076 ! 77 | static const char* SLICER_PE_SKIRT_COMMENTS[] = {"skirt", "move to first skirt point", NULL};
2023-05-09 13:45:45,076 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:45:45,076 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:73:20: warning: 'SLICER_PE_BRIDGE_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:45:45,077 ! 73 | static const char* SLICER_PE_BRIDGE_COMMENTS[] = {
2023-05-09 13:45:45,077 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:45:45,077 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:72:20: warning: 'SLICER_PE_GAP_FILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:45:45,077 ! 72 | static const char* SLICER_PE_GAP_FILL_COMMENTS[] = {"gap fill", "move to first gap fill point", NULL};
2023-05-09 13:45:45,077 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:45:45,078 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:69:20: warning: 'SLICER_PE_SOLID_INFILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:45:45,078 ! 69 | static const char* SLICER_PE_SOLID_INFILL_COMMENTS[] = {
2023-05-09 13:45:45,078 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:45:45,078 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:68:20: warning: 'SLICER_PE_INFILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:45:45,078 ! 68 | static const char* SLICER_PE_INFILL_COMMENTS[] = {"infill", "move to first infill point", NULL};
2023-05-09 13:45:45,079 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:45:45,079 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:67:20: warning: 'SLICER_PE_UNKNOWN_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:45:45,079 ! 67 | static const char* SLICER_PE_UNKNOWN_PERIMETER_COMMENTS[] = {"perimeter", "move to first perimeter point", NULL};
2023-05-09 13:45:45,079 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:45:45,079 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:64:20: warning: 'SLICER_PE_INNER_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:45:45,080 ! 64 | static const char* SLICER_PE_INNER_PERIMETER_COMMENTS[] = {
2023-05-09 13:45:45,080 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:45:45,080 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:61:20: warning: 'SLICER_PE_OUTER_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:45:45,080 ! 61 | static const char* SLICER_PE_OUTER_PERIMETER_COMMENTS[] = {
2023-05-09 13:45:45,081 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:45:45,081 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/gcode_position_processor.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/gcode_position_processor.o -O3 -std=c++11
2023-05-09 13:45:45,081 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:915: warning: ignoring '#pragma region location_detection_commands' [-Wunknown-pragmas]
2023-05-09 13:45:45,081 ! 915 | #pragma region location_detection_commands
2023-05-09 13:45:45,081 ! |
2023-05-09 13:45:45,082 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:955: warning: ignoring '#pragma endregion Parse' [-Wunknown-pragmas]
2023-05-09 13:45:45,082 ! 955 | #pragma endregion Parse the list of location detection commands
2023-05-09 13:45:45,082 ! |
2023-05-09 13:45:45,082 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1122: warning: ignoring '#pragma region Extract' [-Wunknown-pragmas]
2023-05-09 13:45:45,082 ! 1122 | #pragma region Extract extruder objects
2023-05-09 13:45:45,083 ! |
2023-05-09 13:45:45,083 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1219: warning: ignoring '#pragma endregion Parse' [-Wunknown-pragmas]
2023-05-09 13:45:45,083 ! 1219 | #pragma endregion Parse extruder objects
2023-05-09 13:45:45,083 ! |
2023-05-09 13:45:45,083 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1221: warning: ignoring '#pragma region Extract' [-Wunknown-pragmas]
2023-05-09 13:45:45,083 ! 1221 | #pragma region Extract firmware extruder offsets from the printer settings
2023-05-09 13:45:45,084 ! |
2023-05-09 13:45:45,084 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1334: warning: ignoring '#pragma endregion Extract' [-Wunknown-pragmas]
2023-05-09 13:45:45,084 ! 1334 | #pragma endregion Extract firmware extruder offsets from the printer settings
2023-05-09 13:45:45,084 ! |
2023-05-09 13:45:45,084 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp: In function 'int main(int, char**)':
2023-05-09 13:45:45,085 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:56:27: warning: 'void PyEval_InitThreads()' is deprecated [-Wdeprecated-declarations]
2023-05-09 13:45:45,085 ! 56 |         PyEval_InitThreads();
2023-05-09 13:45:45,085 ! |         ~~~~~~~~~~~~~~~~~~^~
2023-05-09 13:45:45,085 ! In file included from /usr/include/python3.10/Python.h:130,
2023-05-09 13:45:45,085 ! from octoprint_octolapse/data/lib/c/gcode_position_processor.h:30,
2023-05-09 13:45:45,086 ! from octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:23:
2023-05-09 13:45:45,086 ! /usr/include/python3.10/ceval.h:122:37: note: declared here
2023-05-09 13:45:45,086 ! 122 | Py_DEPRECATED(3.9) PyAPI_FUNC(void) PyEval_InitThreads(void);
2023-05-09 13:45:45,086 ! |                                     ^~~~~~~~~~~~~~~~~~
2023-05-09 13:45:45,086 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp: In function 'PyObject* Initialize(PyObject*, PyObject*)':
2023-05-09 13:45:45,087 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:371:19: warning: unused variable 'p_gcode_position' [-Wunused-variable]
2023-05-09 13:45:45,087 ! 371 |   gcode_position* p_gcode_position = NULL;
2023-05-09 13:45:45,087 ! |                   ^~~~~~~~~~~~~~~~
2023-05-09 13:45:45,087 ! In file included from /usr/include/c++/12.2.1/bits/cxxabi_init_exception.h:38,
2023-05-09 13:45:45,087 ! from /usr/include/c++/12.2.1/bits/exception_ptr.h:38,
2023-05-09 13:45:45,088 ! from /usr/include/c++/12.2.1/exception:168,
2023-05-09 13:45:45,088 ! from /usr/include/c++/12.2.1/stdexcept:38,
2023-05-09 13:45:45,088 ! from /usr/include/c++/12.2.1/system_error:41,
2023-05-09 13:45:45,088 ! from /usr/include/c++/12.2.1/bits/ios_base.h:46,
2023-05-09 13:45:45,088 ! from /usr/include/c++/12.2.1/iomanip:40,
2023-05-09 13:45:45,089 ! from octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:24:
2023-05-09 13:45:45,089 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp: In function 'bool ParseStabilizationArgs(PyObject*, stabilization_args*, PyObject**, PyObject**)':
2023-05-09 13:45:45,089 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1406:12: error: converting to 'bool' from 'std::nullptr_t' requires direct-initialization [-fpermissive]
2023-05-09 13:45:45,089 ! 1406 |     return NULL;
2023-05-09 13:45:45,089 ! |            ^~~~
2023-05-09 13:45:45,090 ! In file included from octoprint_octolapse/data/lib/c/gcode_position_processor.h:37:
2023-05-09 13:45:45,090 ! octoprint_octolapse/data/lib/c/stabilization_smart_gcode.h: At global scope:
2023-05-09 13:45:45,090 ! octoprint_octolapse/data/lib/c/stabilization_smart_gcode.h:5:20: warning: 'SMART_GCODE_STABILIZATION' defined but not used [-Wunused-variable]
2023-05-09 13:45:45,090 ! 5 | static const char* SMART_GCODE_STABILIZATION = "smart_gcode";
2023-05-09 13:45:45,090 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:45:45,091 ! In file included from octoprint_octolapse/data/lib/c/gcode_position_processor.h:36:
2023-05-09 13:45:45,091 ! octoprint_octolapse/data/lib/c/stabilization_smart_layer.h:11:20: warning: 'SMART_LAYER_STABILIZATION' defined but not used [-Wunused-variable]
2023-05-09 13:45:45,091 ! 11 | static const char* SMART_LAYER_STABILIZATION = "smart_layer";
2023-05-09 13:45:45,091 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:45:45,091 ! In file included from octoprint_octolapse/data/lib/c/gcode_position_processor.h:35:
2023-05-09 13:45:45,092 ! octoprint_octolapse/data/lib/c/stabilization.h:44:20: warning: 'send_parsed_command_never' defined but not used [-Wunused-variable]
2023-05-09 13:45:45,092 ! 44 | static const char* send_parsed_command_never = "never";
2023-05-09 13:45:45,092 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:45:45,092 ! octoprint_octolapse/data/lib/c/stabilization.h:43:20: warning: 'send_parsed_command_last' defined but not used [-Wunused-variable]
2023-05-09 13:45:45,092 ! 43 | static const char* send_parsed_command_last = "last";
2023-05-09 13:45:45,093 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:45:45,093 ! octoprint_octolapse/data/lib/c/stabilization.h:42:20: warning: 'send_parsed_command_first' defined but not used [-Wunused-variable]
2023-05-09 13:45:45,093 ! 42 | static const char* send_parsed_command_first = "first";
2023-05-09 13:45:45,093 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:45:45,093 ! octoprint_octolapse/data/lib/c/stabilization.h:41:20: warning: 'snapshot_action' defined but not used [-Wunused-variable]
2023-05-09 13:45:45,094 ! 41 | static const char* snapshot_action = "snapshot";
2023-05-09 13:45:45,094 ! |                    ^~~~~~~~~~~~~~~
2023-05-09 13:45:45,094 ! octoprint_octolapse/data/lib/c/stabilization.h:40:20: warning: 'travel_action' defined but not used [-Wunused-variable]
2023-05-09 13:45:45,094 ! 40 | static const char* travel_action = "travel";
2023-05-09 13:45:45,094 ! |                    ^~~~~~~~~~~~~
2023-05-09 13:45:45,094 ! In file included from octoprint_octolapse/data/lib/c/gcode_position.h:29,
2023-05-09 13:45:45,095 ! from octoprint_octolapse/data/lib/c/gcode_position_processor.h:33:
2023-05-09 13:45:45,095 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:77:20: warning: 'SLICER_PE_SKIRT_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:45:45,095 ! 77 | static const char* SLICER_PE_SKIRT_COMMENTS[] = {"skirt", "move to first skirt point", NULL};
2023-05-09 13:45:45,095 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:45:45,095 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:73:20: warning: 'SLICER_PE_BRIDGE_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:45:45,096 ! 73 | static const char* SLICER_PE_BRIDGE_COMMENTS[] = {
2023-05-09 13:45:45,096 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:45:45,096 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:72:20: warning: 'SLICER_PE_GAP_FILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:45:45,096 ! 72 | static const char* SLICER_PE_GAP_FILL_COMMENTS[] = {"gap fill", "move to first gap fill point", NULL};
2023-05-09 13:45:45,096 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:45:45,097 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:69:20: warning: 'SLICER_PE_SOLID_INFILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:45:45,097 ! 69 | static const char* SLICER_PE_SOLID_INFILL_COMMENTS[] = {
2023-05-09 13:45:45,097 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:45:45,097 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:68:20: warning: 'SLICER_PE_INFILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:45:45,097 ! 68 | static const char* SLICER_PE_INFILL_COMMENTS[] = {"infill", "move to first infill point", NULL};
2023-05-09 13:45:45,098 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:45:45,098 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:67:20: warning: 'SLICER_PE_UNKNOWN_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:45:45,098 ! 67 | static const char* SLICER_PE_UNKNOWN_PERIMETER_COMMENTS[] = {"perimeter", "move to first perimeter point", NULL};
2023-05-09 13:45:45,098 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:45:45,098 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:64:20: warning: 'SLICER_PE_INNER_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:45:45,098 ! 64 | static const char* SLICER_PE_INNER_PERIMETER_COMMENTS[] = {
2023-05-09 13:45:45,099 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:45:45,099 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:61:20: warning: 'SLICER_PE_OUTER_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:45:45,099 ! 61 | static const char* SLICER_PE_OUTER_PERIMETER_COMMENTS[] = {
2023-05-09 13:45:45,099 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:45:45,099 ! error: command '/usr/bin/gcc' failed with exit code 1
2023-05-09 13:45:45,100 ! [end of output]
2023-05-09 13:45:45,100 ! 
2023-05-09 13:45:45,100 ! note: This error originates from a subprocess, and is likely not a problem with pip.
2023-05-09 13:45:45,100 ! error: legacy-install-failure
2023-05-09 13:45:45,100 ! 
2023-05-09 13:45:45,101 ! × Encountered error while trying to install package.
2023-05-09 13:45:45,101 ! ╰─> Octolapse
2023-05-09 13:45:45,101 ! 
2023-05-09 13:45:45,101 ! note: This is an issue with the package mentioned above, not pip.
2023-05-09 13:45:45,101 ! hint: See above for output from the failure.
2023-05-09 13:50:35,060   /usr/bin/python3 -m pip --disable-pip-version-check install file:///tmp/tmpl5ntjxh2/Octolapse-master.zip --no-cache-dir
2023-05-09 13:50:41,131 > Processing /tmp/tmpl5ntjxh2/Octolapse-master.zip
2023-05-09 13:50:43,143 > Preparing metadata (setup.py): started
2023-05-09 13:50:59,261 > Preparing metadata (setup.py): finished with status 'done'
2023-05-09 13:50:59,263 > Requirement already satisfied: pillow>=6.2.0<7.0.0 in /usr/lib/python3.10/site-packages (from Octolapse==0.4.2) (9.3.0)
2023-05-09 13:50:59,264 > Requirement already satisfied: sarge in /usr/lib/python3.10/site-packages (from Octolapse==0.4.2) (0.1.6)
2023-05-09 13:50:59,265 > Requirement already satisfied: six in /usr/lib/python3.10/site-packages (from Octolapse==0.4.2) (1.16.0)
2023-05-09 13:50:59,265 > Requirement already satisfied: OctoPrint>1.3.8 in /usr/lib/python3.10/site-packages (from Octolapse==0.4.2) (1.8.7)
2023-05-09 13:50:59,266 > Requirement already satisfied: psutil in /usr/lib/python3.10/site-packages (from Octolapse==0.4.2) (5.9.4)
2023-05-09 13:50:59,266 > Requirement already satisfied: file_read_backwards in /usr/lib/python3.10/site-packages (from Octolapse==0.4.2) (3.0.0)
2023-05-09 13:50:59,266 > Requirement already satisfied: setuptools>=6.0 in /usr/lib/python3.10/site-packages (from Octolapse==0.4.2) (65.6.0)
2023-05-09 13:50:59,269 > Requirement already satisfied: awesome-slugify<1.7,>=1.6.5 in /usr/lib/python3.10/site-packages (from Octolapse==0.4.2) (1.6.5)
2023-05-09 13:50:59,270 > Requirement already satisfied: regex in /usr/lib/python3.10/site-packages (from awesome-slugify<1.7,>=1.6.5->Octolapse==0.4.2) (2022.10.31)
2023-05-09 13:50:59,270 > Requirement already satisfied: Unidecode<0.05,>=0.04.14 in /usr/lib/python3.10/site-packages (from awesome-slugify<1.7,>=1.6.5->Octolapse==0.4.2) (0.4.21)
2023-05-09 13:50:59,271 > Requirement already satisfied: OctoPrint-FileCheck>=2021.2.23 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2021.2.23)
2023-05-09 13:50:59,271 > Requirement already satisfied: OctoPrint-FirmwareCheck>=2021.10.11 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2021.10.11)
2023-05-09 13:50:59,271 > Requirement already satisfied: OctoPrint-PiSupport>=2022.6.13 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2022.6.13)
2023-05-09 13:50:59,271 > Requirement already satisfied: argon2_cffi<22,>=21.3.0 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (21.3.0)
2023-05-09 13:50:59,272 > Requirement already satisfied: cachelib<0.3,>=0.2 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (0.2.0)
2023-05-09 13:50:59,272 > Requirement already satisfied: Click<9,>=8.0.3 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (8.1.3)
2023-05-09 13:50:59,273 > Requirement already satisfied: colorlog<7,>=6 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (6.7.0)
2023-05-09 13:50:59,273 > Requirement already satisfied: emoji<2,>=1.4.2 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.7.0)
2023-05-09 13:50:59,274 > Requirement already satisfied: feedparser<7,>=6.0.8 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (6.0.10)
2023-05-09 13:50:59,274 > Requirement already satisfied: filetype<2,>=1.0.7 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.2.0)
2023-05-09 13:50:59,274 > Requirement already satisfied: Flask-Assets<3,>=2.0 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2.0)
2023-05-09 13:50:59,275 > Requirement already satisfied: Flask-Babel<3,>=2.0 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2.0.0)
2023-05-09 13:50:59,275 > Requirement already satisfied: Flask-Login<0.6,>=0.5 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (0.5.0)
2023-05-09 13:50:59,275 > Requirement already satisfied: Flask-Limiter<3,>=2.6 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2.9.2)
2023-05-09 13:50:59,275 > Requirement already satisfied: flask<2.2,>=2.1 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2.1.3)
2023-05-09 13:50:59,275 > Requirement already satisfied: frozendict<3,>=2.0 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2.3.7)
2023-05-09 13:50:59,276 > Requirement already satisfied: future<1,>=0.18.2 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (0.18.3)
2023-05-09 13:50:59,276 > Requirement already satisfied: markdown<4,>=3.2.2 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (3.4.3)
2023-05-09 13:50:59,276 > Requirement already satisfied: netaddr<0.9,>=0.8 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (0.8.0)
2023-05-09 13:50:59,276 > Requirement already satisfied: netifaces<1,>=0.11 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (0.11.0)
2023-05-09 13:50:59,277 > Requirement already satisfied: passlib<2,>=1.7.4 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.7.4)
2023-05-09 13:50:59,277 > Requirement already satisfied: pathvalidate<3,>=2.4.1 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2.5.2)
2023-05-09 13:50:59,277 > Requirement already satisfied: pkginfo<2,>=1.7.1 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.9.6)
2023-05-09 13:50:59,277 > Requirement already satisfied: pylru<2,>=1.2 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.2.1)
2023-05-09 13:50:59,277 > Requirement already satisfied: pyserial<4,>=3.4 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (3.5)
2023-05-09 13:50:59,278 > Requirement already satisfied: PyYAML<6,>=5.4.1 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (5.4.1)
2023-05-09 13:50:59,278 > Requirement already satisfied: requests<3,>=2.26.0 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2.28.2)
2023-05-09 13:50:59,278 > Requirement already satisfied: semantic_version<3,>=2.8.5 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2.10.0)
2023-05-09 13:50:59,278 > Requirement already satisfied: sentry-sdk<2,>=1.5.7 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.19.1)
2023-05-09 13:50:59,278 > Requirement already satisfied: tornado<7,>=6.0.4 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (6.2)
2023-05-09 13:50:59,279 > Requirement already satisfied: watchdog<2,>=1 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.0.2)
2023-05-09 13:50:59,279 > Requirement already satisfied: websocket-client<2,>=1.2.1 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.5.1)
2023-05-09 13:50:59,279 > Requirement already satisfied: werkzeug<2.1,>=2.0 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (2.0.3)
2023-05-09 13:50:59,279 > Requirement already satisfied: wrapt<1.15,>=1.14 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.14.1)
2023-05-09 13:50:59,279 > Requirement already satisfied: zeroconf<0.34,>=0.33 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (0.33.4)
2023-05-09 13:50:59,280 > Requirement already satisfied: zipstream-ng<2.0.0,>=1.3.4 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.5.0)
2023-05-09 13:50:59,280 > Requirement already satisfied: blinker<2,>=1.4 in /usr/lib/python3.10/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.2) (1.6.1)
2023-05-09 13:50:59,280 > Requirement already satisfied: typing-extensions>=4.2 in /usr/lib/python3.10/site-packages (from blinker<2,>=1.4->OctoPrint>1.3.8->Octolapse==0.4.2) (4.5.0)
2023-05-09 13:50:59,280 > Requirement already satisfied: sgmllib3k in /usr/lib/python3.10/site-packages (from feedparser<7,>=6.0.8->OctoPrint>1.3.8->Octolapse==0.4.2) (1.0.0)
2023-05-09 13:50:59,281 > Requirement already satisfied: itsdangerous>=2.0 in /usr/lib/python3.10/site-packages (from flask<2.2,>=2.1->OctoPrint>1.3.8->Octolapse==0.4.2) (2.1.2)
2023-05-09 13:50:59,281 > Requirement already satisfied: Jinja2>=3.0 in /usr/lib/python3.10/site-packages (from flask<2.2,>=2.1->OctoPrint>1.3.8->Octolapse==0.4.2) (3.1.2)
2023-05-09 13:50:59,281 > Requirement already satisfied: webassets>=2.0 in /usr/lib/python3.10/site-packages (from Flask-Assets<3,>=2.0->OctoPrint>1.3.8->Octolapse==0.4.2) (2.0)
2023-05-09 13:50:59,282 > Requirement already satisfied: pytz in /usr/lib/python3.10/site-packages (from Flask-Babel<3,>=2.0->OctoPrint>1.3.8->Octolapse==0.4.2) (2023.3)
2023-05-09 13:50:59,282 > Requirement already satisfied: Babel>=2.3 in /usr/lib/python3.10/site-packages (from Flask-Babel<3,>=2.0->OctoPrint>1.3.8->Octolapse==0.4.2) (2.12.1)
2023-05-09 13:50:59,282 > Requirement already satisfied: limits>=2.8 in /usr/lib/python3.10/site-packages (from Flask-Limiter<3,>=2.6->OctoPrint>1.3.8->Octolapse==0.4.2) (3.3.1)
2023-05-09 13:50:59,283 > Requirement already satisfied: rich<13,>=12 in /usr/lib/python3.10/site-packages (from Flask-Limiter<3,>=2.6->OctoPrint>1.3.8->Octolapse==0.4.2) (12.6.0)
2023-05-09 13:50:59,283 > Requirement already satisfied: ordered-set<5,>4 in /usr/lib/python3.10/site-packages (from Flask-Limiter<3,>=2.6->OctoPrint>1.3.8->Octolapse==0.4.2) (4.1.0)
2023-05-09 13:50:59,283 > Requirement already satisfied: charset-normalizer<4,>=2 in /usr/lib/python3.10/site-packages (from requests<3,>=2.26.0->OctoPrint>1.3.8->Octolapse==0.4.2) (3.1.0)
2023-05-09 13:50:59,283 > Requirement already satisfied: urllib3<1.27,>=1.21.1 in /usr/lib/python3.10/site-packages (from requests<3,>=2.26.0->OctoPrint>1.3.8->Octolapse==0.4.2) (1.26.15)
2023-05-09 13:50:59,284 > Requirement already satisfied: idna<4,>=2.5 in /usr/lib/python3.10/site-packages (from requests<3,>=2.26.0->OctoPrint>1.3.8->Octolapse==0.4.2) (3.4)
2023-05-09 13:50:59,284 > Requirement already satisfied: certifi>=2017.4.17 in /usr/lib/python3.10/site-packages (from requests<3,>=2.26.0->OctoPrint>1.3.8->Octolapse==0.4.2) (2022.12.7)
2023-05-09 13:51:00,356 > Requirement already satisfied: ifaddr>=0.1.7 in /usr/lib/python3.10/site-packages (from zeroconf<0.34,>=0.33->OctoPrint>1.3.8->Octolapse==0.4.2) (0.2.0)
2023-05-09 13:51:00,357 > Requirement already satisfied: MarkupSafe>=2.0 in /usr/lib/python3.10/site-packages (from Jinja2>=3.0->flask<2.2,>=2.1->OctoPrint>1.3.8->Octolapse==0.4.2) (2.1.2)
2023-05-09 13:51:00,359 > Requirement already satisfied: packaging<24,>=21 in /usr/lib/python3.10/site-packages (from limits>=2.8->Flask-Limiter<3,>=2.6->OctoPrint>1.3.8->Octolapse==0.4.2) (23.0)
2023-05-09 13:51:00,360 > Requirement already satisfied: deprecated>=1.2 in /usr/lib/python3.10/site-packages (from limits>=2.8->Flask-Limiter<3,>=2.6->OctoPrint>1.3.8->Octolapse==0.4.2) (1.2.13)
2023-05-09 13:51:00,361 > Requirement already satisfied: importlib-resources>=1.3 in /usr/lib/python3.10/site-packages (from limits>=2.8->Flask-Limiter<3,>=2.6->OctoPrint>1.3.8->Octolapse==0.4.2) (5.12.0)
2023-05-09 13:51:00,361 > Requirement already satisfied: pygments<3.0.0,>=2.6.0 in /usr/lib/python3.10/site-packages (from rich<13,>=12->Flask-Limiter<3,>=2.6->OctoPrint>1.3.8->Octolapse==0.4.2) (2.15.0)
2023-05-09 13:51:00,362 > Requirement already satisfied: commonmark<0.10.0,>=0.9.0 in /usr/lib/python3.10/site-packages (from rich<13,>=12->Flask-Limiter<3,>=2.6->OctoPrint>1.3.8->Octolapse==0.4.2) (0.9.1)
2023-05-09 13:51:01,586 > Installing collected packages: Octolapse
2023-05-09 13:51:01,586 > Running setup.py install for Octolapse: started
2023-05-09 13:51:02,093 ! DEPRECATION: Octolapse is being installed using the legacy 'setup.py install' method, because it does not have a 'pyproject.toml' and the 'wheel' package is not installed. pip 23.1 will enforce this behaviour change. A possible replacement is to enable the '--use-pep517' option. Discussion can be found at https://github.com/pypa/pip/issues/8559
2023-05-09 13:52:01,724 > Running setup.py install for Octolapse: still running...
2023-05-09 13:52:03,077 > Running setup.py install for Octolapse: finished with status 'error'
2023-05-09 13:52:03,652 ! error: subprocess-exited-with-error
2023-05-09 13:52:03,653 ! 
2023-05-09 13:52:03,653 ! × Running setup.py install for Octolapse did not run successfully.
2023-05-09 13:52:03,653 ! │ exit code: 1
2023-05-09 13:52:03,654 ! ╰─> [1152 lines of output]
2023-05-09 13:52:03,654 ! likely tags: v0.4.2
2023-05-09 13:52:03,654 ! picking v0.4.2
2023-05-09 13:52:03,654 ! got version from expanded keyword {'version': 'v0.4.2', 'full-revisionid': 'c6c86782cdbfc3590fa4b1bf2e63064eb459b16b', 'dirty': False, 'error': None, 'date': '2023-04-02T10:23:21-0500'}
2023-05-09 13:52:03,655 ! Argon2 passlib backend is not available, not using it for password hashing
2023-05-09 13:52:03,655 ! /tmp/pip-req-build-w2g7t43d/setup.py:58: DeprecationWarning: distutils Version classes are deprecated. Use packaging.version instead.
2023-05-09 13:52:03,655 ! if LooseVersion(octoprint.server.VERSION) < LooseVersion("1.4"):
2023-05-09 13:52:03,655 ! Found packages: {'octoprint_octolapse.test', 'octoprint_octolapse_setuptools', 'octoprint_octolapse'}
2023-05-09 13:52:03,656 ! running install
2023-05-09 13:52:03,656 ! /usr/lib/python3.10/site-packages/setuptools/command/install.py:34: SetuptoolsDeprecationWarning: setup.py install is deprecated. Use build and pip and other standards-based tools.
2023-05-09 13:52:03,656 ! warnings.warn(
2023-05-09 13:52:03,656 ! running build
2023-05-09 13:52:03,657 ! running build_py
2023-05-09 13:52:03,657 ! creating build
2023-05-09 13:52:03,661 ! creating build/lib.linux-aarch64-cpython-310
2023-05-09 13:52:03,661 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:52:03,662 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:52:03,665 ! copying octoprint_octolapse/test/test_settings.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:52:03,666 ! copying octoprint_octolapse/test/test_trigger_layer.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:52:03,667 ! copying octoprint_octolapse/test/__init__.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:52:03,668 ! copying octoprint_octolapse/test/test_extruder.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:52:03,668 ! copying octoprint_octolapse/test/test_parsing.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:52:03,668 ! copying octoprint_octolapse/test/test_render.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:52:03,669 ! copying octoprint_octolapse/test/test_timelapse.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:52:03,672 ! copying octoprint_octolapse/test/test_intersection.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:52:03,673 ! copying octoprint_octolapse/test/test_trigger_gcode.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:52:03,673 ! copying octoprint_octolapse/test/testing_utilities.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:52:03,673 ! copying octoprint_octolapse/test/test_octolapseplugin.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:52:03,674 ! copying octoprint_octolapse/test/test_position.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:52:03,674 ! copying octoprint_octolapse/test/test_trigger_timer.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:52:03,674 ! copying octoprint_octolapse/test/test_command.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:52:03,674 ! copying octoprint_octolapse/test/test_settings_slicer.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:52:03,674 ! copying octoprint_octolapse/test/test_utility.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:52:03,675 ! copying octoprint_octolapse/test/test_snapshotGcode.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:52:03,675 ! copying octoprint_octolapse/test/test_migration_version.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:52:03,675 ! copying octoprint_octolapse/test/test_trigger.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:52:03,675 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse_setuptools
2023-05-09 13:52:03,676 ! copying octoprint_octolapse_setuptools/__init__.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse_setuptools
2023-05-09 13:52:03,676 ! copying octoprint_octolapse/snapshot.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:52:03,676 ! copying octoprint_octolapse/log.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:52:03,676 ! copying octoprint_octolapse/__init__.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:52:03,677 ! copying octoprint_octolapse/messenger_worker.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:52:03,677 ! copying octoprint_octolapse/gcode_processor.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:52:03,677 ! copying octoprint_octolapse/gcode_commands.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:52:03,677 ! copying octoprint_octolapse/camera.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:52:03,678 ! copying octoprint_octolapse/position.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:52:03,678 ! copying octoprint_octolapse/stabilization_preprocessing.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:52:03,678 ! copying octoprint_octolapse/utility.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:52:03,678 ! copying octoprint_octolapse/settings_external.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:52:03,679 ! copying octoprint_octolapse/render.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:52:03,679 ! copying octoprint_octolapse/settings_preprocessor.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:52:03,679 ! copying octoprint_octolapse/script.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:52:03,679 ! copying octoprint_octolapse/migration.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:52:03,680 ! copying octoprint_octolapse/_version.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:52:03,680 ! copying octoprint_octolapse/stabilization_gcode.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:52:03,680 ! copying octoprint_octolapse/settings.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:52:03,680 ! copying octoprint_octolapse/error_messages.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:52:03,680 ! copying octoprint_octolapse/trigger.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:52:03,681 ! copying octoprint_octolapse/timelapse.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:52:03,681 ! running egg_info
2023-05-09 13:52:03,681 ! creating Octolapse.egg-info
2023-05-09 13:52:03,682 ! writing Octolapse.egg-info/PKG-INFO
2023-05-09 13:52:03,682 ! writing dependency_links to Octolapse.egg-info/dependency_links.txt
2023-05-09 13:52:03,682 ! writing entry points to Octolapse.egg-info/entry_points.txt
2023-05-09 13:52:03,682 ! writing requirements to Octolapse.egg-info/requires.txt
2023-05-09 13:52:03,684 ! writing top-level names to Octolapse.egg-info/top_level.txt
2023-05-09 13:52:03,684 ! writing manifest file 'Octolapse.egg-info/SOURCES.txt'
2023-05-09 13:52:03,685 ! reading manifest file 'Octolapse.egg-info/SOURCES.txt'
2023-05-09 13:52:03,685 ! reading manifest template 'MANIFEST.in'
2023-05-09 13:52:03,685 ! warning: no files found matching 'README.md'
2023-05-09 13:52:03,685 ! warning: no files found matching '*' under directory 'octoprint_octolapse/translations'
2023-05-09 13:52:03,687 ! warning: no files found matching '*' under directory 'octoprint_octolapse/data/images'
2023-05-09 13:52:03,689 ! adding license file 'LICENSE'
2023-05-09 13:52:03,689 ! writing manifest file 'Octolapse.egg-info/SOURCES.txt'
2023-05-09 13:52:03,689 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data' as data is deprecated, please list it in `packages`.
2023-05-09 13:52:03,690 ! !!
2023-05-09 13:52:03,690 ! 
2023-05-09 13:52:03,690 ! 
2023-05-09 13:52:03,690 ! ############################
2023-05-09 13:52:03,691 ! # Package would be ignored #
2023-05-09 13:52:03,691 ! ############################
2023-05-09 13:52:03,691 ! Python recognizes 'octoprint_octolapse.data' as an importable package,
2023-05-09 13:52:03,691 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:52:03,691 ! 
2023-05-09 13:52:03,692 ! 'octoprint_octolapse.data' has been automatically added to the distribution only
2023-05-09 13:52:03,692 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:52:03,692 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:52:03,692 ! 
2023-05-09 13:52:03,693 ! Please make sure that 'octoprint_octolapse.data' is included as a package by using
2023-05-09 13:52:03,693 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:52:03,693 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:52:03,693 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:52:03,694 ! 
2023-05-09 13:52:03,694 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:52:03,694 ! documentation page.
2023-05-09 13:52:03,694 ! 
2023-05-09 13:52:03,694 ! 
2023-05-09 13:52:03,695 ! !!
2023-05-09 13:52:03,695 ! 
2023-05-09 13:52:03,695 ! check.warn(importable)
2023-05-09 13:52:03,695 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.Images' as data is deprecated, please list it in `packages`.
2023-05-09 13:52:03,695 ! !!
2023-05-09 13:52:03,696 ! 
2023-05-09 13:52:03,696 ! 
2023-05-09 13:52:03,696 ! ############################
2023-05-09 13:52:03,696 ! # Package would be ignored #
2023-05-09 13:52:03,697 ! ############################
2023-05-09 13:52:03,697 ! Python recognizes 'octoprint_octolapse.data.Images' as an importable package,
2023-05-09 13:52:03,697 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:52:03,697 ! 
2023-05-09 13:52:03,697 ! 'octoprint_octolapse.data.Images' has been automatically added to the distribution only
2023-05-09 13:52:03,698 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:52:03,698 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:52:03,698 ! 
2023-05-09 13:52:03,698 ! Please make sure that 'octoprint_octolapse.data.Images' is included as a package by using
2023-05-09 13:52:03,699 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:52:03,699 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:52:03,699 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:52:03,699 ! 
2023-05-09 13:52:03,699 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:52:03,700 ! documentation page.
2023-05-09 13:52:03,700 ! 
2023-05-09 13:52:03,700 ! 
2023-05-09 13:52:03,700 ! !!
2023-05-09 13:52:03,700 ! 
2023-05-09 13:52:03,701 ! check.warn(importable)
2023-05-09 13:52:03,701 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.fonts.DejaVu' as data is deprecated, please list it in `packages`.
2023-05-09 13:52:03,701 ! !!
2023-05-09 13:52:03,701 ! 
2023-05-09 13:52:03,701 ! 
2023-05-09 13:52:03,702 ! ############################
2023-05-09 13:52:03,702 ! # Package would be ignored #
2023-05-09 13:52:03,702 ! ############################
2023-05-09 13:52:03,702 ! Python recognizes 'octoprint_octolapse.data.fonts.DejaVu' as an importable package,
2023-05-09 13:52:03,702 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:52:03,703 ! 
2023-05-09 13:52:03,703 ! 'octoprint_octolapse.data.fonts.DejaVu' has been automatically added to the distribution only
2023-05-09 13:52:03,703 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:52:03,703 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:52:03,704 ! 
2023-05-09 13:52:03,705 ! Please make sure that 'octoprint_octolapse.data.fonts.DejaVu' is included as a package by using
2023-05-09 13:52:03,705 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:52:03,705 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:52:03,706 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:52:03,706 ! 
2023-05-09 13:52:03,706 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:52:03,706 ! documentation page.
2023-05-09 13:52:03,707 ! 
2023-05-09 13:52:03,707 ! 
2023-05-09 13:52:03,707 ! !!
2023-05-09 13:52:03,707 ! 
2023-05-09 13:52:03,708 ! check.warn(importable)
2023-05-09 13:52:03,708 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.lib.c' as data is deprecated, please list it in `packages`.
2023-05-09 13:52:03,708 ! !!
2023-05-09 13:52:03,708 ! 
2023-05-09 13:52:03,709 ! 
2023-05-09 13:52:03,709 ! ############################
2023-05-09 13:52:03,709 ! # Package would be ignored #
2023-05-09 13:52:03,709 ! ############################
2023-05-09 13:52:03,710 ! Python recognizes 'octoprint_octolapse.data.lib.c' as an importable package,
2023-05-09 13:52:03,710 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:52:03,710 ! 
2023-05-09 13:52:03,710 ! 'octoprint_octolapse.data.lib.c' has been automatically added to the distribution only
2023-05-09 13:52:03,710 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:52:03,711 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:52:03,711 ! 
2023-05-09 13:52:03,711 ! Please make sure that 'octoprint_octolapse.data.lib.c' is included as a package by using
2023-05-09 13:52:03,711 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:52:03,711 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:52:03,712 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:52:03,712 ! 
2023-05-09 13:52:03,712 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:52:03,713 ! documentation page.
2023-05-09 13:52:03,713 ! 
2023-05-09 13:52:03,713 ! 
2023-05-09 13:52:03,713 ! !!
2023-05-09 13:52:03,713 ! 
2023-05-09 13:52:03,714 ! check.warn(importable)
2023-05-09 13:52:03,714 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.scripts.gcode.cura' as data is deprecated, please list it in `packages`.
2023-05-09 13:52:03,714 ! !!
2023-05-09 13:52:03,714 ! 
2023-05-09 13:52:03,714 ! 
2023-05-09 13:52:03,715 ! ############################
2023-05-09 13:52:03,715 ! # Package would be ignored #
2023-05-09 13:52:03,715 ! ############################
2023-05-09 13:52:03,715 ! Python recognizes 'octoprint_octolapse.data.scripts.gcode.cura' as an importable package,
2023-05-09 13:52:03,716 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:52:03,716 ! 
2023-05-09 13:52:03,716 ! 'octoprint_octolapse.data.scripts.gcode.cura' has been automatically added to the distribution only
2023-05-09 13:52:03,716 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:52:03,716 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:52:03,717 ! 
2023-05-09 13:52:03,717 ! Please make sure that 'octoprint_octolapse.data.scripts.gcode.cura' is included as a package by using
2023-05-09 13:52:03,717 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:52:03,717 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:52:03,717 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:52:03,718 ! 
2023-05-09 13:52:03,718 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:52:03,718 ! documentation page.
2023-05-09 13:52:03,718 ! 
2023-05-09 13:52:03,718 ! 
2023-05-09 13:52:03,718 ! !!
2023-05-09 13:52:03,719 ! 
2023-05-09 13:52:03,719 ! check.warn(importable)
2023-05-09 13:52:03,719 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.scripts.linux' as data is deprecated, please list it in `packages`.
2023-05-09 13:52:03,719 ! !!
2023-05-09 13:52:03,719 ! 
2023-05-09 13:52:03,720 ! 
2023-05-09 13:52:03,720 ! ############################
2023-05-09 13:52:03,720 ! # Package would be ignored #
2023-05-09 13:52:03,720 ! ############################
2023-05-09 13:52:03,721 ! Python recognizes 'octoprint_octolapse.data.scripts.linux' as an importable package,
2023-05-09 13:52:03,721 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:52:03,721 ! 
2023-05-09 13:52:03,721 ! 'octoprint_octolapse.data.scripts.linux' has been automatically added to the distribution only
2023-05-09 13:52:03,721 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:52:03,722 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:52:03,722 ! 
2023-05-09 13:52:03,722 ! Please make sure that 'octoprint_octolapse.data.scripts.linux' is included as a package by using
2023-05-09 13:52:03,722 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:52:03,722 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:52:03,723 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:52:03,723 ! 
2023-05-09 13:52:03,723 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:52:03,723 ! documentation page.
2023-05-09 13:52:03,723 ! 
2023-05-09 13:52:03,724 ! 
2023-05-09 13:52:03,724 ! !!
2023-05-09 13:52:03,724 ! 
2023-05-09 13:52:03,724 ! check.warn(importable)
2023-05-09 13:52:03,724 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.scripts.windows' as data is deprecated, please list it in `packages`.
2023-05-09 13:52:03,725 ! !!
2023-05-09 13:52:03,725 ! 
2023-05-09 13:52:03,727 ! 
2023-05-09 13:52:03,729 ! ############################
2023-05-09 13:52:03,729 ! # Package would be ignored #
2023-05-09 13:52:03,729 ! ############################
2023-05-09 13:52:03,729 ! Python recognizes 'octoprint_octolapse.data.scripts.windows' as an importable package,
2023-05-09 13:52:03,730 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:52:03,730 ! 
2023-05-09 13:52:03,730 ! 'octoprint_octolapse.data.scripts.windows' has been automatically added to the distribution only
2023-05-09 13:52:03,730 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:52:03,730 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:52:03,731 ! 
2023-05-09 13:52:03,731 ! Please make sure that 'octoprint_octolapse.data.scripts.windows' is included as a package by using
2023-05-09 13:52:03,731 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:52:03,732 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:52:03,732 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:52:03,732 ! 
2023-05-09 13:52:03,733 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:52:03,733 ! documentation page.
2023-05-09 13:52:03,733 ! 
2023-05-09 13:52:03,733 ! 
2023-05-09 13:52:03,733 ! !!
2023-05-09 13:52:03,734 ! 
2023-05-09 13:52:03,734 ! check.warn(importable)
2023-05-09 13:52:03,734 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.templates' as data is deprecated, please list it in `packages`.
2023-05-09 13:52:03,734 ! !!
2023-05-09 13:52:03,735 ! 
2023-05-09 13:52:03,735 ! 
2023-05-09 13:52:03,735 ! ############################
2023-05-09 13:52:03,735 ! # Package would be ignored #
2023-05-09 13:52:03,735 ! ############################
2023-05-09 13:52:03,736 ! Python recognizes 'octoprint_octolapse.data.templates' as an importable package,
2023-05-09 13:52:03,736 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:52:03,736 ! 
2023-05-09 13:52:03,736 ! 'octoprint_octolapse.data.templates' has been automatically added to the distribution only
2023-05-09 13:52:03,736 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:52:03,737 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:52:03,737 ! 
2023-05-09 13:52:03,737 ! Please make sure that 'octoprint_octolapse.data.templates' is included as a package by using
2023-05-09 13:52:03,738 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:52:03,739 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:52:03,739 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:52:03,739 ! 
2023-05-09 13:52:03,739 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:52:03,740 ! documentation page.
2023-05-09 13:52:03,740 ! 
2023-05-09 13:52:03,740 ! 
2023-05-09 13:52:03,740 ! !!
2023-05-09 13:52:03,740 ! 
2023-05-09 13:52:03,741 ! check.warn(importable)
2023-05-09 13:52:03,741 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.webcam_types' as data is deprecated, please list it in `packages`.
2023-05-09 13:52:03,741 ! !!
2023-05-09 13:52:03,741 ! 
2023-05-09 13:52:03,741 ! 
2023-05-09 13:52:03,742 ! ############################
2023-05-09 13:52:03,742 ! # Package would be ignored #
2023-05-09 13:52:03,742 ! ############################
2023-05-09 13:52:03,742 ! Python recognizes 'octoprint_octolapse.data.webcam_types' as an importable package,
2023-05-09 13:52:03,742 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:52:03,743 ! 
2023-05-09 13:52:03,743 ! 'octoprint_octolapse.data.webcam_types' has been automatically added to the distribution only
2023-05-09 13:52:03,743 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:52:03,743 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:52:03,743 ! 
2023-05-09 13:52:03,744 ! Please make sure that 'octoprint_octolapse.data.webcam_types' is included as a package by using
2023-05-09 13:52:03,744 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:52:03,744 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:52:03,744 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:52:03,745 ! 
2023-05-09 13:52:03,745 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:52:03,745 ! documentation page.
2023-05-09 13:52:03,745 ! 
2023-05-09 13:52:03,745 ! 
2023-05-09 13:52:03,746 ! !!
2023-05-09 13:52:03,746 ! 
2023-05-09 13:52:03,746 ! check.warn(importable)
2023-05-09 13:52:03,746 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.webcam_types.mjpg_streamer' as data is deprecated, please list it in `packages`.
2023-05-09 13:52:03,746 ! !!
2023-05-09 13:52:03,747 ! 
2023-05-09 13:52:03,747 ! 
2023-05-09 13:52:03,747 ! ############################
2023-05-09 13:52:03,747 ! # Package would be ignored #
2023-05-09 13:52:03,747 ! ############################
2023-05-09 13:52:03,748 ! Python recognizes 'octoprint_octolapse.data.webcam_types.mjpg_streamer' as an importable package,
2023-05-09 13:52:03,748 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:52:03,748 ! 
2023-05-09 13:52:03,748 ! 'octoprint_octolapse.data.webcam_types.mjpg_streamer' has been automatically added to the distribution only
2023-05-09 13:52:03,749 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:52:03,749 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:52:03,749 ! 
2023-05-09 13:52:03,749 ! Please make sure that 'octoprint_octolapse.data.webcam_types.mjpg_streamer' is included as a package by using
2023-05-09 13:52:03,749 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:52:03,750 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:52:03,750 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:52:03,750 ! 
2023-05-09 13:52:03,750 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:52:03,750 ! documentation page.
2023-05-09 13:52:03,751 ! 
2023-05-09 13:52:03,751 ! 
2023-05-09 13:52:03,751 ! !!
2023-05-09 13:52:03,751 ! 
2023-05-09 13:52:03,751 ! check.warn(importable)
2023-05-09 13:52:03,752 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.css' as data is deprecated, please list it in `packages`.
2023-05-09 13:52:03,752 ! !!
2023-05-09 13:52:03,752 ! 
2023-05-09 13:52:03,752 ! 
2023-05-09 13:52:03,752 ! ############################
2023-05-09 13:52:03,753 ! # Package would be ignored #
2023-05-09 13:52:03,753 ! ############################
2023-05-09 13:52:03,753 ! Python recognizes 'octoprint_octolapse.static.css' as an importable package,
2023-05-09 13:52:03,753 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:52:03,753 ! 
2023-05-09 13:52:03,754 ! 'octoprint_octolapse.static.css' has been automatically added to the distribution only
2023-05-09 13:52:03,754 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:52:03,754 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:52:03,754 ! 
2023-05-09 13:52:03,755 ! Please make sure that 'octoprint_octolapse.static.css' is included as a package by using
2023-05-09 13:52:03,755 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:52:03,756 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:52:03,756 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:52:03,756 ! 
2023-05-09 13:52:03,756 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:52:03,757 ! documentation page.
2023-05-09 13:52:03,757 ! 
2023-05-09 13:52:03,757 ! 
2023-05-09 13:52:03,757 ! !!
2023-05-09 13:52:03,757 ! 
2023-05-09 13:52:03,758 ! check.warn(importable)
2023-05-09 13:52:03,758 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.docs.help' as data is deprecated, please list it in `packages`.
2023-05-09 13:52:03,758 ! !!
2023-05-09 13:52:03,758 ! 
2023-05-09 13:52:03,758 ! 
2023-05-09 13:52:03,759 ! ############################
2023-05-09 13:52:03,759 ! # Package would be ignored #
2023-05-09 13:52:03,759 ! ############################
2023-05-09 13:52:03,759 ! Python recognizes 'octoprint_octolapse.static.docs.help' as an importable package,
2023-05-09 13:52:03,759 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:52:03,760 ! 
2023-05-09 13:52:03,760 ! 'octoprint_octolapse.static.docs.help' has been automatically added to the distribution only
2023-05-09 13:52:03,760 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:52:03,760 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:52:03,761 ! 
2023-05-09 13:52:03,761 ! Please make sure that 'octoprint_octolapse.static.docs.help' is included as a package by using
2023-05-09 13:52:03,761 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:52:03,761 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:52:03,761 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:52:03,762 ! 
2023-05-09 13:52:03,762 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:52:03,762 ! documentation page.
2023-05-09 13:52:03,762 ! 
2023-05-09 13:52:03,762 ! 
2023-05-09 13:52:03,763 ! !!
2023-05-09 13:52:03,763 ! 
2023-05-09 13:52:03,763 ! check.warn(importable)
2023-05-09 13:52:03,763 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.img' as data is deprecated, please list it in `packages`.
2023-05-09 13:52:03,763 ! !!
2023-05-09 13:52:03,764 ! 
2023-05-09 13:52:03,764 ! 
2023-05-09 13:52:03,764 ! ############################
2023-05-09 13:52:03,764 ! # Package would be ignored #
2023-05-09 13:52:03,765 ! ############################
2023-05-09 13:52:03,765 ! Python recognizes 'octoprint_octolapse.static.img' as an importable package,
2023-05-09 13:52:03,765 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:52:03,765 ! 
2023-05-09 13:52:03,765 ! 'octoprint_octolapse.static.img' has been automatically added to the distribution only
2023-05-09 13:52:03,766 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:52:03,766 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:52:03,766 ! 
2023-05-09 13:52:03,766 ! Please make sure that 'octoprint_octolapse.static.img' is included as a package by using
2023-05-09 13:52:03,766 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:52:03,767 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:52:03,767 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:52:03,767 ! 
2023-05-09 13:52:03,767 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:52:03,768 ! documentation page.
2023-05-09 13:52:03,768 ! 
2023-05-09 13:52:03,768 ! 
2023-05-09 13:52:03,768 ! !!
2023-05-09 13:52:03,769 ! 
2023-05-09 13:52:03,769 ! check.warn(importable)
2023-05-09 13:52:03,769 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.js' as data is deprecated, please list it in `packages`.
2023-05-09 13:52:03,769 ! !!
2023-05-09 13:52:03,770 ! 
2023-05-09 13:52:03,771 ! 
2023-05-09 13:52:03,771 ! ############################
2023-05-09 13:52:03,771 ! # Package would be ignored #
2023-05-09 13:52:03,772 ! ############################
2023-05-09 13:52:03,772 ! Python recognizes 'octoprint_octolapse.static.js' as an importable package,
2023-05-09 13:52:03,772 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:52:03,772 ! 
2023-05-09 13:52:03,773 ! 'octoprint_octolapse.static.js' has been automatically added to the distribution only
2023-05-09 13:52:03,773 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:52:03,773 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:52:03,773 ! 
2023-05-09 13:52:03,774 ! Please make sure that 'octoprint_octolapse.static.js' is included as a package by using
2023-05-09 13:52:03,774 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:52:03,774 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:52:03,774 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:52:03,774 ! 
2023-05-09 13:52:03,775 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:52:03,775 ! documentation page.
2023-05-09 13:52:03,775 ! 
2023-05-09 13:52:03,775 ! 
2023-05-09 13:52:03,775 ! !!
2023-05-09 13:52:03,775 ! 
2023-05-09 13:52:03,776 ! check.warn(importable)
2023-05-09 13:52:03,776 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.js.webcams.mjpg_streamer' as data is deprecated, please list it in `packages`.
2023-05-09 13:52:03,776 ! !!
2023-05-09 13:52:03,776 ! 
2023-05-09 13:52:03,777 ! 
2023-05-09 13:52:03,777 ! ############################
2023-05-09 13:52:03,777 ! # Package would be ignored #
2023-05-09 13:52:03,777 ! ############################
2023-05-09 13:52:03,777 ! Python recognizes 'octoprint_octolapse.static.js.webcams.mjpg_streamer' as an importable package,
2023-05-09 13:52:03,777 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:52:03,778 ! 
2023-05-09 13:52:03,778 ! 'octoprint_octolapse.static.js.webcams.mjpg_streamer' has been automatically added to the distribution only
2023-05-09 13:52:03,778 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:52:03,778 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:52:03,779 ! 
2023-05-09 13:52:03,779 ! Please make sure that 'octoprint_octolapse.static.js.webcams.mjpg_streamer' is included as a package by using
2023-05-09 13:52:03,779 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:52:03,779 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:52:03,779 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:52:03,780 ! 
2023-05-09 13:52:03,780 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:52:03,780 ! documentation page.
2023-05-09 13:52:03,780 ! 
2023-05-09 13:52:03,781 ! 
2023-05-09 13:52:03,781 ! !!
2023-05-09 13:52:03,781 ! 
2023-05-09 13:52:03,781 ! check.warn(importable)
2023-05-09 13:52:03,781 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.templates' as data is deprecated, please list it in `packages`.
2023-05-09 13:52:03,782 ! !!
2023-05-09 13:52:03,782 ! 
2023-05-09 13:52:03,782 ! 
2023-05-09 13:52:03,782 ! ############################
2023-05-09 13:52:03,782 ! # Package would be ignored #
2023-05-09 13:52:03,783 ! ############################
2023-05-09 13:52:03,783 ! Python recognizes 'octoprint_octolapse.templates' as an importable package,
2023-05-09 13:52:03,783 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:52:03,783 ! 
2023-05-09 13:52:03,783 ! 'octoprint_octolapse.templates' has been automatically added to the distribution only
2023-05-09 13:52:03,784 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:52:03,784 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:52:03,784 ! 
2023-05-09 13:52:03,784 ! Please make sure that 'octoprint_octolapse.templates' is included as a package by using
2023-05-09 13:52:03,784 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:52:03,785 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:52:03,785 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:52:03,785 ! 
2023-05-09 13:52:03,785 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:52:03,785 ! documentation page.
2023-05-09 13:52:03,786 ! 
2023-05-09 13:52:03,786 ! 
2023-05-09 13:52:03,786 ! !!
2023-05-09 13:52:03,786 ! 
2023-05-09 13:52:03,786 ! check.warn(importable)
2023-05-09 13:52:03,787 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.templates.webcams.mjpg_streamer' as data is deprecated, please list it in `packages`.
2023-05-09 13:52:03,787 ! !!
2023-05-09 13:52:03,787 ! 
2023-05-09 13:52:03,787 ! 
2023-05-09 13:52:03,787 ! ############################
2023-05-09 13:52:03,788 ! # Package would be ignored #
2023-05-09 13:52:03,788 ! ############################
2023-05-09 13:52:03,788 ! Python recognizes 'octoprint_octolapse.templates.webcams.mjpg_streamer' as an importable package,
2023-05-09 13:52:03,788 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:52:03,788 ! 
2023-05-09 13:52:03,789 ! 'octoprint_octolapse.templates.webcams.mjpg_streamer' has been automatically added to the distribution only
2023-05-09 13:52:03,789 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:52:03,789 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:52:03,789 ! 
2023-05-09 13:52:03,789 ! Please make sure that 'octoprint_octolapse.templates.webcams.mjpg_streamer' is included as a package by using
2023-05-09 13:52:03,790 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:52:03,790 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:52:03,790 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:52:03,790 ! 
2023-05-09 13:52:03,791 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:52:03,791 ! documentation page.
2023-05-09 13:52:03,791 ! 
2023-05-09 13:52:03,791 ! 
2023-05-09 13:52:03,791 ! !!
2023-05-09 13:52:03,791 ! 
2023-05-09 13:52:03,792 ! check.warn(importable)
2023-05-09 13:52:03,792 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:52:03,792 ! copying octoprint_octolapse/data/settings_default_0.3.3rc3.dev0.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:52:03,792 ! copying octoprint_octolapse/data/settings_default_0.4.0.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:52:03,793 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev0.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:52:03,793 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev2.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:52:03,793 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev3.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:52:03,793 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev4.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:52:03,793 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev5.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:52:03,794 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:52:03,794 ! copying octoprint_octolapse/data/settings_default_0.4.0rc2.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:52:03,794 ! copying octoprint_octolapse/data/settings_default_0.4.0rc3.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:52:03,794 ! copying octoprint_octolapse/data/settings_default_current.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:52:03,794 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 13:52:03,795 ! copying octoprint_octolapse/data/Images/no-camera-selected.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 13:52:03,795 ! copying octoprint_octolapse/data/Images/no-image-available.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 13:52:03,795 ! copying octoprint_octolapse/data/Images/no_snapshot.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 13:52:03,795 ! copying octoprint_octolapse/data/Images/test-snapshot-image.jpg -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 13:52:03,795 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/fonts
2023-05-09 13:52:03,796 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/fonts/DejaVu
2023-05-09 13:52:03,796 ! copying octoprint_octolapse/data/fonts/DejaVu/DejaVuSansMono.ttf -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/fonts/DejaVu
2023-05-09 13:52:03,796 ! copying octoprint_octolapse/data/fonts/DejaVu/license.txt -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/fonts/DejaVu
2023-05-09 13:52:03,796 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib
2023-05-09 13:52:03,796 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:52:03,797 ! copying octoprint_octolapse/data/lib/c/extruder.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:52:03,797 ! copying octoprint_octolapse/data/lib/c/extruder.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:52:03,797 ! copying octoprint_octolapse/data/lib/c/gcode_comment_processor.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:52:03,797 ! copying octoprint_octolapse/data/lib/c/gcode_comment_processor.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:52:03,798 ! copying octoprint_octolapse/data/lib/c/gcode_parser.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:52:03,798 ! copying octoprint_octolapse/data/lib/c/gcode_parser.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:52:03,798 ! copying octoprint_octolapse/data/lib/c/gcode_position.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:52:03,798 ! copying octoprint_octolapse/data/lib/c/gcode_position.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:52:03,798 ! copying octoprint_octolapse/data/lib/c/gcode_position_processor.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:52:03,799 ! copying octoprint_octolapse/data/lib/c/gcode_position_processor.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:52:03,799 ! copying octoprint_octolapse/data/lib/c/logging.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:52:03,799 ! copying octoprint_octolapse/data/lib/c/logging.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:52:03,799 ! copying octoprint_octolapse/data/lib/c/parsed_command.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:52:03,799 ! copying octoprint_octolapse/data/lib/c/parsed_command.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:52:03,800 ! copying octoprint_octolapse/data/lib/c/parsed_command_parameter.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:52:03,800 ! copying octoprint_octolapse/data/lib/c/parsed_command_parameter.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:52:03,800 ! copying octoprint_octolapse/data/lib/c/position.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:52:03,800 ! copying octoprint_octolapse/data/lib/c/position.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:52:03,800 ! copying octoprint_octolapse/data/lib/c/python_helpers.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:52:03,801 ! copying octoprint_octolapse/data/lib/c/python_helpers.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:52:03,801 ! copying octoprint_octolapse/data/lib/c/snapshot_plan.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:52:03,801 ! copying octoprint_octolapse/data/lib/c/snapshot_plan.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:52:03,801 ! copying octoprint_octolapse/data/lib/c/snapshot_plan_step.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:52:03,801 ! copying octoprint_octolapse/data/lib/c/snapshot_plan_step.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:52:03,802 ! copying octoprint_octolapse/data/lib/c/stabilization.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:52:03,802 ! copying octoprint_octolapse/data/lib/c/stabilization.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:52:03,802 ! copying octoprint_octolapse/data/lib/c/stabilization_results.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:52:03,802 ! copying octoprint_octolapse/data/lib/c/stabilization_results.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:52:03,802 ! copying octoprint_octolapse/data/lib/c/stabilization_smart_gcode.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:52:03,803 ! copying octoprint_octolapse/data/lib/c/stabilization_smart_gcode.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:52:03,803 ! copying octoprint_octolapse/data/lib/c/stabilization_smart_layer.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:52:03,803 ! copying octoprint_octolapse/data/lib/c/stabilization_smart_layer.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:52:03,803 ! copying octoprint_octolapse/data/lib/c/stabilization_snap_to_print.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:52:03,803 ! copying octoprint_octolapse/data/lib/c/stabilization_snap_to_print.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:52:03,804 ! copying octoprint_octolapse/data/lib/c/trigger_position.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:52:03,804 ! copying octoprint_octolapse/data/lib/c/trigger_position.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:52:03,804 ! copying octoprint_octolapse/data/lib/c/utilities.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:52:03,804 ! copying octoprint_octolapse/data/lib/c/utilities.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:52:03,804 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts
2023-05-09 13:52:03,805 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode
2023-05-09 13:52:03,805 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:52:03,805 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:52:03,805 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_02_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:52:03,805 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_03_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:52:03,806 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_04_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:52:03,806 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_05_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:52:03,806 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_06_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:52:03,806 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_07_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:52:03,806 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_08_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:52:03,807 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:52:03,807 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:52:03,807 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_02_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:52:03,807 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_03_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:52:03,807 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_04_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:52:03,808 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_05_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:52:03,808 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_06_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:52:03,808 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_07_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:52:03,809 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_08_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:52:03,809 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:52:03,809 ! copying octoprint_octolapse/data/scripts/linux/capture_image_leave_on_camera.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:52:03,809 ! copying octoprint_octolapse/data/scripts/linux/download-from-camera-and-rename.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:52:03,810 ! copying octoprint_octolapse/data/scripts/linux/initialize_dslr.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:52:03,810 ! copying octoprint_octolapse/data/scripts/linux/move_snapshots_to_target.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:52:03,811 ! copying octoprint_octolapse/data/scripts/linux/take_snapshot_and_download.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:52:03,811 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/windows
2023-05-09 13:52:03,811 ! copying octoprint_octolapse/data/scripts/windows/take_snapshot_and_download.bat -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/windows
2023-05-09 13:52:03,812 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/templates
2023-05-09 13:52:03,812 ! copying octoprint_octolapse/data/templates/cura_gcode_settings_template.txt -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/templates
2023-05-09 13:52:03,812 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types
2023-05-09 13:52:03,812 ! copying octoprint_octolapse/data/webcam_types/camera_types.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types
2023-05-09 13:52:03,813 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:52:03,813 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/logitech_c250.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:52:03,813 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/logitech_c920.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:52:03,813 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/logitech_c920_2.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:52:03,813 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/logitech_c920_3.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:52:03,814 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/raspi_cam_v2.1.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:52:03,814 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/raspi_cam_v2.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:52:03,814 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static
2023-05-09 13:52:03,814 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/css
2023-05-09 13:52:03,814 ! copying octoprint_octolapse/static/css/jquery.minicolors.css -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/css
2023-05-09 13:52:03,815 ! copying octoprint_octolapse/static/css/jquery.minicolors.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/css
2023-05-09 13:52:03,815 ! copying octoprint_octolapse/static/css/octolapse.css -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/css
2023-05-09 13:52:03,815 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs
2023-05-09 13:52:03,815 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,815 ! copying octoprint_octolapse/static/docs/help/dialog.renderings.in_process.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,816 ! copying octoprint_octolapse/static/docs/help/dialog.renderings.unfinished.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,816 ! copying octoprint_octolapse/static/docs/help/dialog.timelapse_files.snapshot_archive.import.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,816 ! copying octoprint_octolapse/static/docs/help/dialog.timelapse_files.snapshot_archive.tab.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,816 ! copying octoprint_octolapse/static/docs/help/dialog.timelapse_files.timelapse.tab.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,817 ! copying octoprint_octolapse/static/docs/help/error_help_error_not_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,817 ! copying octoprint_octolapse/static/docs/help/error_help_init_automatic_slicer_no_settings_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,817 ! copying octoprint_octolapse/static/docs/help/error_help_init_automatic_slicer_settings_missing.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,817 ! copying octoprint_octolapse/static/docs/help/error_help_init_before_print_start_camera_script_apply_failed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,817 ! copying octoprint_octolapse/static/docs/help/error_help_init_camera_init_test_failed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,818 ! copying octoprint_octolapse/static/docs/help/error_help_init_camera_settings_apply_failed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,818 ! copying octoprint_octolapse/static/docs/help/error_help_init_cant_print_from_sd.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,818 ! copying octoprint_octolapse/static/docs/help/error_help_init_directory_test_failed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,818 ! copying octoprint_octolapse/static/docs/help/error_help_init_ffmpeg_not_found_at_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,818 ! copying octoprint_octolapse/static/docs/help/error_help_init_ffmpeg_path_not_set.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,819 ! copying octoprint_octolapse/static/docs/help/error_help_init_ffmpeg_path_retrieve_exception.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,819 ! copying octoprint_octolapse/static/docs/help/error_help_init_incorrect_octoprint_version.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,819 ! copying octoprint_octolapse/static/docs/help/error_help_init_incorrect_print_start_state.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,819 ! copying octoprint_octolapse/static/docs/help/error_help_init_m114_not_supported.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,819 ! copying octoprint_octolapse/static/docs/help/error_help_init_manual_slicer_settings_missing.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,820 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_current_job_data_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,820 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_current_job_file_data_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,820 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_enabled_cameras.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,820 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_gcode_filepath_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,820 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_printer_profile_exists.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,821 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_printer_profile_selected.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,821 ! copying octoprint_octolapse/static/docs/help/error_help_init_octolapse_is_disabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,821 ! copying octoprint_octolapse/static/docs/help/error_help_init_overlay_font_path_not_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,821 ! copying octoprint_octolapse/static/docs/help/error_help_init_printer_not_configured.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,821 ! copying octoprint_octolapse/static/docs/help/error_help_init_rendering_file_template_invalid.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,822 ! copying octoprint_octolapse/static/docs/help/error_help_init_timelapse_start_exception.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,822 ! copying octoprint_octolapse/static/docs/help/error_help_init_too_few_extruders_defined.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,822 ! copying octoprint_octolapse/static/docs/help/error_help_init_too_few_extruders_offsets_defined.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,822 ! copying octoprint_octolapse/static/docs/help/error_help_init_unable_to_accept_snapshot_plan.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,822 ! copying octoprint_octolapse/static/docs/help/error_help_init_unexpected_exception.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,823 ! copying octoprint_octolapse/static/docs/help/error_help_init_unknown_file_origin.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,823 ! copying octoprint_octolapse/static/docs/help/error_help_not_a_valid_error_dict.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,823 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_axis_mode_e_unknown.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,823 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_axis_mode_xyz_unknown.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,823 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_incorrect_trigger_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,824 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_no_definite_position.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,824 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_no_metric_units.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,824 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_no_snapshot_commands_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,824 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_no_snapshot_plans_returned.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,824 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_printer_not_primed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,825 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_unhandled_exception.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,825 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_unknown_trigger_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,825 ! copying octoprint_octolapse/static/docs/help/error_help_rendering_archive_import_no_files_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,825 ! copying octoprint_octolapse/static/docs/help/error_help_rendering_archive_import_zip_file_corrupt.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,825 ! copying octoprint_octolapse/static/docs/help/error_help_rendering_archive_import_zip_file_too_large.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,826 ! copying octoprint_octolapse/static/docs/help/error_help_settings_slicer_simplify3d_duplicate_toolhead_numbers.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,826 ! copying octoprint_octolapse/static/docs/help/error_help_settings_slicer_simplify3d_extruder_count_mismatch.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,826 ! copying octoprint_octolapse/static/docs/help/error_help_settings_slicer_simplify3d_max_extruder_count_exceeded.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,826 ! copying octoprint_octolapse/static/docs/help/error_help_settings_slicer_simplify3d_unexpected_max_toolhead_number.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,826 ! copying octoprint_octolapse/static/docs/help/error_help_timelapse_cannot_aquire_job_lock.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,827 ! copying octoprint_octolapse/static/docs/help/main_settings.auto_reload_frames.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,827 ! copying octoprint_octolapse/static/docs/help/main_settings.auto_reload_latest_snapshot.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,827 ! copying octoprint_octolapse/static/docs/help/main_settings.automatic_update_interval_days.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,827 ! copying octoprint_octolapse/static/docs/help/main_settings.automatic_updates_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,828 ! copying octoprint_octolapse/static/docs/help/main_settings.cancel_print_on_startup_error.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,828 ! copying octoprint_octolapse/static/docs/help/main_settings.enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,828 ! copying octoprint_octolapse/static/docs/help/main_settings.is_test_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,828 ! copying octoprint_octolapse/static/docs/help/main_settings.preview_snapshot_plan_autoclose.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,829 ! copying octoprint_octolapse/static/docs/help/main_settings.preview_snapshot_plan_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,829 ! copying octoprint_octolapse/static/docs/help/main_settings.preview_snapshot_plans.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,829 ! copying octoprint_octolapse/static/docs/help/main_settings.show_extruder_state_changes.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,829 ! copying octoprint_octolapse/static/docs/help/main_settings.show_navbar_icon.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,829 ! copying octoprint_octolapse/static/docs/help/main_settings.show_navbar_when_not_printing.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,830 ! copying octoprint_octolapse/static/docs/help/main_settings.show_position_changes.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,830 ! copying octoprint_octolapse/static/docs/help/main_settings.show_printer_state_changes.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,830 ! copying octoprint_octolapse/static/docs/help/main_settings.show_snapshot_plan_information.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,830 ! copying octoprint_octolapse/static/docs/help/main_settings.show_trigger_state_changes.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,831 ! copying octoprint_octolapse/static/docs/help/main_settings.snapshot_archive_directory.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,831 ! copying octoprint_octolapse/static/docs/help/main_settings.temporary_directory.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,831 ! copying octoprint_octolapse/static/docs/help/main_settings.timelapse_directory.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,831 ! copying octoprint_octolapse/static/docs/help/profiles.camera.apply_settings_at_startup.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,831 ! copying octoprint_octolapse/static/docs/help/profiles.camera.apply_settings_before_print.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,832 ! copying octoprint_octolapse/static/docs/help/profiles.camera.apply_settings_when_disabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,832 ! copying octoprint_octolapse/static/docs/help/profiles.camera.camera_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,832 ! copying octoprint_octolapse/static/docs/help/profiles.camera.delay.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,832 ! copying octoprint_octolapse/static/docs/help/profiles.camera.edit_cutsom_image_preferences.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,832 ! copying octoprint_octolapse/static/docs/help/profiles.camera.external_camera_snapshot_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,833 ! copying octoprint_octolapse/static/docs/help/profiles.camera.gcode_camera_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,833 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_after_render_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,833 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_after_snapshot_gcode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,833 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_after_snapshot_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,833 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_before_render_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,834 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_before_snapshot_gcode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,834 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_before_snapshot_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,834 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_print_end_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,834 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_print_start_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,834 ! copying octoprint_octolapse/static/docs/help/profiles.camera.snapshot_transpose.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,835 ! copying octoprint_octolapse/static/docs/help/profiles.camera.stream_template.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,835 ! copying octoprint_octolapse/static/docs/help/profiles.camera.timeout_ms.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,835 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.address.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,835 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.enable_custom_image_preferences.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,835 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.ignore_ssl_error.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,836 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.1.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,836 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029518.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,836 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029519.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,836 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029538.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,836 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029670.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,838 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029671.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,838 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029675.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,838 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094849.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,838 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094850.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,839 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094851.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,839 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094856.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,839 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094857.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,839 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094858.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,839 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094860.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,840 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094861.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,840 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094867.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,840 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094868.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,840 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094870.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,841 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094871.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,841 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094872.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,841 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094873.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,841 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094874.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,841 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10291459.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,842 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963776.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,842 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963777.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,842 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963778.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,842 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963788.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,842 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963790.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,843 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963791.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,843 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963795.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,843 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963796.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,843 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963797.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,843 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963800.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,844 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963802.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,844 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963803.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,844 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963804.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,844 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963807.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,845 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963810.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,845 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963818.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,845 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.password.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,845 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.snapshot_request_template.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,845 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.stream_download.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,846 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.username.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,846 ! copying octoprint_octolapse/static/docs/help/profiles.library.is_custom.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,846 ! copying octoprint_octolapse/static/docs/help/profiles.logging.enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,846 ! copying octoprint_octolapse/static/docs/help/profiles.logging.log_all_errors.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,846 ! copying octoprint_octolapse/static/docs/help/profiles.logging.log_to_console.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,847 ! copying octoprint_octolapse/static/docs/help/profiles.logging.logging_level.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,847 ! copying octoprint_octolapse/static/docs/help/profiles.logging.manage_log_files.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,847 ! copying octoprint_octolapse/static/docs/help/profiles.logging.modules_to_log.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,847 ! copying octoprint_octolapse/static/docs/help/profiles.printer.auto_detect_position.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,847 ! copying octoprint_octolapse/static/docs/help/profiles.printer.auto_position_detection_commands.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,848 ! copying octoprint_octolapse/static/docs/help/profiles.printer.automatic_configuration.is_automatic.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,848 ! copying octoprint_octolapse/static/docs/help/profiles.printer.automatic_configuration.make.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,848 ! copying octoprint_octolapse/static/docs/help/profiles.printer.automatic_configuration.model.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,848 ! copying octoprint_octolapse/static/docs/help/profiles.printer.bed_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,848 ! copying octoprint_octolapse/static/docs/help/profiles.printer.custom_bounding_box.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,849 ! copying octoprint_octolapse/static/docs/help/profiles.printer.default_extruder.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,849 ! copying octoprint_octolapse/static/docs/help/profiles.printer.default_firmware_retractions.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,849 ! copying octoprint_octolapse/static/docs/help/profiles.printer.default_firmware_retractions_zhop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,849 ! copying octoprint_octolapse/static/docs/help/profiles.printer.e_axis_default_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,849 ! copying octoprint_octolapse/static/docs/help/profiles.printer.extruder_offsets.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,850 ! copying octoprint_octolapse/static/docs/help/profiles.printer.g90_influences_extruder.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,850 ! copying octoprint_octolapse/static/docs/help/profiles.printer.gocde_axis_compatibility_mode_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,850 ! copying octoprint_octolapse/static/docs/help/profiles.printer.home_axis_gcode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,850 ! copying octoprint_octolapse/static/docs/help/profiles.printer.invert_e.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,850 ! copying octoprint_octolapse/static/docs/help/profiles.printer.invert_x.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,851 ! copying octoprint_octolapse/static/docs/help/profiles.printer.invert_y.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,851 ! copying octoprint_octolapse/static/docs/help/profiles.printer.invert_z.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,851 ! copying octoprint_octolapse/static/docs/help/profiles.printer.minimum_layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,851 ! copying octoprint_octolapse/static/docs/help/profiles.printer.num_extruders.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,851 ! copying octoprint_octolapse/static/docs/help/profiles.printer.origin_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,852 ! copying octoprint_octolapse/static/docs/help/profiles.printer.override_octoprint_profile_settings.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,852 ! copying octoprint_octolapse/static/docs/help/profiles.printer.priming_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,852 ! copying octoprint_octolapse/static/docs/help/profiles.printer.restrict_snapshot_area.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,852 ! copying octoprint_octolapse/static/docs/help/profiles.printer.shared_extruder.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,852 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicer_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,853 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.automatic.continue_on_failure.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,853 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.automatic.disable_automatic_save.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,853 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.4_2.speed_z_hop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,853 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,853 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.max_feedrate_z_override.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,854 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_amount.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,854 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_enable.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,854 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_hop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,854 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_hop_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,855 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_prime_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,855 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_retract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,855 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.smooth_spiralized_contours.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,855 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.speed_travel.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,855 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.axis_speed_display_unit_options.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,856 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.deretract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,856 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,856 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.retract_before_move.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,856 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.retract_length.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,856 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.retract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,857 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.travel_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,857 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.vase_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,857 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.z_hop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,857 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.z_travel_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,857 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.extruder_use_retract.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,857 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,858 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.retraction_distance.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,858 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.retraction_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,858 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.retraction_vertical_lift.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,858 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.vase_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,858 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.x_y_axis_movement_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,859 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.z_axis_movement_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,859 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.deretract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,859 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,859 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.retract_length.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,859 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.retract_lift.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,860 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.retract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,860 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.travel_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,860 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.vase_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,860 ! copying octoprint_octolapse/static/docs/help/profiles.printer.snapshot_command.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,860 ! copying octoprint_octolapse/static/docs/help/profiles.printer.suppress_snapshot_command_always.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,861 ! copying octoprint_octolapse/static/docs/help/profiles.printer.units_default.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,861 ! copying octoprint_octolapse/static/docs/help/profiles.printer.xyz_axes_default_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,861 ! copying octoprint_octolapse/static/docs/help/profiles.printer.zero_based_extruder.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,861 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.archive_snapshots.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,861 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.bitrate.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,862 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.constant_rate_factor.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,862 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.enable_watermark.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,862 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,862 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.fps.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,862 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.fps_calculation_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,863 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.max_fps.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,863 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.min_fps.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,863 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.output_format.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,863 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.output_template.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,863 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_font_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,864 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_font_size.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,864 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_outline_color.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,864 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_outline_width.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,864 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_preview.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,865 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_alignment.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,865 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_color.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,865 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_halign.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,865 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_pos_xy.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,865 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_template.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,866 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_template_current_time.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,866 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_template_time_elapsed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,866 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_valign.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,866 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.post_roll_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,866 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.pre_roll_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,867 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.run_length_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,867 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.thread_count.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,867 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.wait_for_moves_to_finish.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,867 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_fixed_coordinate.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,867 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_fixed_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,868 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_fixed_path_invert_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,868 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_fixed_path_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,868 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_relative.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,868 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_relative_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,868 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_relative_path_invert_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,869 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_relative_path_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,869 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,870 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_fixed_coordinate.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,870 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_fixed_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,871 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_fixed_path_invert_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,871 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_fixed_path_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,871 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_relative.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,871 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_relative_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,871 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_relative_path_invert_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,872 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_relative_path_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,872 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,872 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.calculate_intersections.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,872 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.extruder_state_requirements_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,873 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.layer_trigger_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,873 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.position_restriction_shape.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,873 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.position_restriction_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,873 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.position_restrictions_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,873 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.require_zhop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,874 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.smart_layer_disable_z_lift.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,874 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.smart_layer_snap_to_print_high_quality.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,874 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.smart_layer_snap_to_print_smooth.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,874 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.smart_layer_trigger_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,874 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.timer_trigger_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,875 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.trigger_subtype.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,875 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.trigger_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,875 ! copying octoprint_octolapse/static/docs/help/quality_issues_fast_trigger.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,875 ! copying octoprint_octolapse/static/docs/help/quality_issues_low_quality_snap_to_print.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,875 ! copying octoprint_octolapse/static/docs/help/quality_issues_no_print_features_detected.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,876 ! copying octoprint_octolapse/static/docs/help/settings.import.import_method.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,876 ! copying octoprint_octolapse/static/docs/help/settings.import.import_text.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,876 ! copying octoprint_octolapse/static/docs/help/snapshot_plan_missed_snapshots.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:52:03,876 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/img
2023-05-09 13:52:03,877 ! copying octoprint_octolapse/static/img/watermark.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/img
2023-05-09 13:52:03,877 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:52:03,877 ! copying octoprint_octolapse/static/js/jquery.minicolors.min.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:52:03,877 ! copying octoprint_octolapse/static/js/jquery.validate.min.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:52:03,877 ! copying octoprint_octolapse/static/js/octolapse.dialog.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:52:03,878 ! copying octoprint_octolapse/static/js/octolapse.dialog.renderings.in_process.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:52:03,878 ! copying octoprint_octolapse/static/js/octolapse.dialog.renderings.unfinished.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:52:03,878 ! copying octoprint_octolapse/static/js/octolapse.dialog.timelapse_files.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:52:03,878 ! copying octoprint_octolapse/static/js/octolapse.file_browser.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:52:03,878 ! copying octoprint_octolapse/static/js/octolapse.help.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:52:03,879 ! copying octoprint_octolapse/static/js/octolapse.helpers.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:52:03,879 ! copying octoprint_octolapse/static/js/octolapse.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:52:03,879 ! copying octoprint_octolapse/static/js/octolapse.profiles.camera.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:52:03,879 ! copying octoprint_octolapse/static/js/octolapse.profiles.camera.webcam.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:52:03,879 ! copying octoprint_octolapse/static/js/octolapse.profiles.camera.webcam.mjpg_streamer.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:52:03,880 ! copying octoprint_octolapse/static/js/octolapse.profiles.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:52:03,880 ! copying octoprint_octolapse/static/js/octolapse.profiles.library.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:52:03,880 ! copying octoprint_octolapse/static/js/octolapse.profiles.logging.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:52:03,880 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:52:03,880 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.slicer.cura.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:52:03,881 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.slicer.other.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:52:03,881 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.slicer.simplify_3d.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:52:03,881 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.slicer.slic3r_pe.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:52:03,881 ! copying octoprint_octolapse/static/js/octolapse.profiles.rendering.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:52:03,881 ! copying octoprint_octolapse/static/js/octolapse.profiles.stabilization.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:52:03,882 ! copying octoprint_octolapse/static/js/octolapse.profiles.trigger.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:52:03,882 ! copying octoprint_octolapse/static/js/octolapse.settings.import.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:52:03,882 ! copying octoprint_octolapse/static/js/octolapse.settings.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:52:03,882 ! copying octoprint_octolapse/static/js/octolapse.settings.main.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:52:03,882 ! copying octoprint_octolapse/static/js/octolapse.status.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:52:03,883 ! copying octoprint_octolapse/static/js/octolapse.status.snapshotplan.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:52:03,883 ! copying octoprint_octolapse/static/js/octolapse.status.snapshotplan_preview.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:52:03,883 ! copying octoprint_octolapse/static/js/showdown.min.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:52:03,883 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js/webcams
2023-05-09 13:52:03,883 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js/webcams/mjpg_streamer
2023-05-09 13:52:03,884 ! copying octoprint_octolapse/static/js/webcams/mjpg_streamer/raspi_cam_v2.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js/webcams/mjpg_streamer
2023-05-09 13:52:03,884 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:52:03,884 ! copying octoprint_octolapse/templates/octolapse_dialog.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:52:03,884 ! copying octoprint_octolapse/templates/octolapse_dialog_rendering_in_process.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:52:03,884 ! copying octoprint_octolapse/templates/octolapse_dialog_rendering_unfinished.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:52:03,885 ! copying octoprint_octolapse/templates/octolapse_dialog_timelapse_files.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:52:03,885 ! copying octoprint_octolapse/templates/octolapse_file_browser.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:52:03,885 ! copying octoprint_octolapse/templates/octolapse_helpers.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:52:03,885 ! copying octoprint_octolapse/templates/octolapse_navbar.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:52:03,886 ! copying octoprint_octolapse/templates/octolapse_profile_dialog_add_edit.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:52:03,886 ! copying octoprint_octolapse/templates/octolapse_profiles.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:52:03,886 ! copying octoprint_octolapse/templates/octolapse_profiles_camera.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:52:03,886 ! copying octoprint_octolapse/templates/octolapse_profiles_camera_webcam.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:52:03,886 ! copying octoprint_octolapse/templates/octolapse_profiles_camera_webcam_mjpg_streamer.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:52:03,887 ! copying octoprint_octolapse/templates/octolapse_profiles_library.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:52:03,887 ! copying octoprint_octolapse/templates/octolapse_profiles_logging.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:52:03,887 ! copying octoprint_octolapse/templates/octolapse_profiles_printer.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:52:03,887 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_automatic.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:52:03,888 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_automatic.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:52:03,888 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_cura.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:52:03,888 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_cura_4.2.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:52:03,888 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_other.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:52:03,888 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_simplify3d.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:52:03,889 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_slic3r_pe.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:52:03,889 ! copying octoprint_octolapse/templates/octolapse_profiles_rendering.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:52:03,889 ! copying octoprint_octolapse/templates/octolapse_profiles_stabilization.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:52:03,890 ! copying octoprint_octolapse/templates/octolapse_profiles_trigger.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:52:03,890 ! copying octoprint_octolapse/templates/octolapse_settings.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:52:03,890 ! copying octoprint_octolapse/templates/octolapse_settings_import.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:52:03,890 ! copying octoprint_octolapse/templates/octolapse_settings_main.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:52:03,890 ! copying octoprint_octolapse/templates/octolapse_snapshot_plan.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:52:03,891 ! copying octoprint_octolapse/templates/octolapse_status_extruder.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:52:03,891 ! copying octoprint_octolapse/templates/octolapse_status_position.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:52:03,891 ! copying octoprint_octolapse/templates/octolapse_status_printer_state.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:52:03,891 ! copying octoprint_octolapse/templates/octolapse_status_snapshot_plan.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:52:03,891 ! copying octoprint_octolapse/templates/octolapse_status_triggers.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:52:03,891 ! copying octoprint_octolapse/templates/octolapse_tab.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:52:03,892 ! copying octoprint_octolapse/templates/octolapse_tab_latest_snapshot.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:52:03,892 ! copying octoprint_octolapse/templates/octolapse_tab_settings_current.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:52:03,892 ! copying octoprint_octolapse/templates/octolapse_tab_settings_current_cameras.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:52:03,892 ! copying octoprint_octolapse/templates/octolapse_tab_snapshot_plan_preview_popup.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:52:03,893 ! copying octoprint_octolapse/templates/octolapse_tab_webcam_settings_popup.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:52:03,893 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams
2023-05-09 13:52:03,893 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams/mjpg_streamer
2023-05-09 13:52:03,893 ! copying octoprint_octolapse/templates/webcams/mjpg_streamer/logitech_c250.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams/mjpg_streamer
2023-05-09 13:52:03,893 ! copying octoprint_octolapse/templates/webcams/mjpg_streamer/logitech_c920.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams/mjpg_streamer
2023-05-09 13:52:03,894 ! copying octoprint_octolapse/templates/webcams/mjpg_streamer/raspi_cam_v2.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams/mjpg_streamer
2023-05-09 13:52:03,894 ! UPDATING build/lib.linux-aarch64-cpython-310/octoprint_octolapse/_version.py
2023-05-09 13:52:03,894 ! set build/lib.linux-aarch64-cpython-310/octoprint_octolapse/_version.py to 'v0.4.2'
2023-05-09 13:52:03,894 ! running build_ext
2023-05-09 13:52:03,894 ! Compiling Octolapse Parser Extension with <distutils.unixccompiler.UnixCCompiler object at 0x74b3447460>.
2023-05-09 13:52:03,894 ! building 'GcodePositionProcessor' extension
2023-05-09 13:52:03,895 ! creating build/temp.linux-aarch64-cpython-310
2023-05-09 13:52:03,895 ! creating build/temp.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:52:03,895 ! creating build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:52:03,895 ! creating build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib
2023-05-09 13:52:03,896 ! creating build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:52:03,896 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/extruder.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/extruder.o -O3 -std=c++11
2023-05-09 13:52:03,896 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/gcode_comment_processor.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/gcode_comment_processor.o -O3 -std=c++11
2023-05-09 13:52:03,896 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.cpp: In member function 'void gcode_comment_processor::update_feature_from_section(position&) const':
2023-05-09 13:52:03,897 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.cpp:99:16: warning: enumeration value 'section_type_no_section' not handled in switch [-Wswitch]
2023-05-09 13:52:03,897 ! 99 |         switch (current_section_)
2023-05-09 13:52:03,897 ! |                ^
2023-05-09 13:52:03,897 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/gcode_parser.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/gcode_parser.o -O3 -std=c++11
2023-05-09 13:52:03,897 ! octoprint_octolapse/data/lib/c/gcode_parser.cpp: In member function 'bool gcode_parser::try_parse_gcode(const char*, parsed_command&)':
2023-05-09 13:52:03,898 ! octoprint_octolapse/data/lib/c/gcode_parser.cpp:148:47: warning: suggest parentheses around '&&' within '||' [-Wparentheses]
2023-05-09 13:52:03,898 ! 148 |     else if (cur_char > 32 || cur_char == ' ' && has_seen_character)
2023-05-09 13:52:03,898 ! |                               ~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:52:03,898 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/gcode_position.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/gcode_position.o -O3 -std=c++11
2023-05-09 13:52:03,898 ! octoprint_octolapse/data/lib/c/gcode_position.cpp: In member function 'void gcode_position::add_position(position&)':
2023-05-09 13:52:03,899 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:395:12: warning: operation on '((gcode_position*)this)->gcode_position::cur_pos_' may be undefined [-Wsequence-point]
2023-05-09 13:52:03,899 ! 395 |   cur_pos_ = (++cur_pos_) % NUM_POSITIONS;
2023-05-09 13:52:03,899 ! octoprint_octolapse/data/lib/c/gcode_position.cpp: In member function 'void gcode_position::add_position(parsed_command&)':
2023-05-09 13:52:03,899 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:402:12: warning: operation on '((gcode_position*)this)->gcode_position::cur_pos_' may be undefined [-Wsequence-point]
2023-05-09 13:52:03,899 ! 402 |   cur_pos_ = (++cur_pos_) % NUM_POSITIONS;
2023-05-09 13:52:03,900 ! octoprint_octolapse/data/lib/c/gcode_position.cpp: In member function 'void gcode_position::update(parsed_command&, long int, long int, long int)':
2023-05-09 13:52:03,900 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:659:31: warning: comparison of integer expressions of different signedness: 'const unsigned int' and 'int' [-Wsign-compare]
2023-05-09 13:52:03,900 ! 659 |                 if (increment > p_current_pos->height_increment && increment > 1)
2023-05-09 13:52:03,900 ! |                     ~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:52:03,900 ! octoprint_octolapse/data/lib/c/gcode_position.cpp: In member function 'void gcode_position::process_g10(position*, parsed_command&)':
2023-05-09 13:52:03,901 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:952:10: warning: variable 's' set but not used [-Wunused-but-set-variable]
2023-05-09 13:52:03,901 ! 952 |   double s = 0;
2023-05-09 13:52:03,901 ! |          ^
2023-05-09 13:52:03,901 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:953:8: warning: variable 'has_s' set but not used [-Wunused-but-set-variable]
2023-05-09 13:52:03,901 ! 953 |   bool has_s = false;
2023-05-09 13:52:03,902 ! |        ^~~~~
2023-05-09 13:52:03,902 ! In file included from octoprint_octolapse/data/lib/c/gcode_position.h:29,
2023-05-09 13:52:03,902 ! from octoprint_octolapse/data/lib/c/gcode_position.cpp:22:
2023-05-09 13:52:03,903 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h: At global scope:
2023-05-09 13:52:03,904 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:77:20: warning: 'SLICER_PE_SKIRT_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:52:03,904 ! 77 | static const char* SLICER_PE_SKIRT_COMMENTS[] = {"skirt", "move to first skirt point", NULL};
2023-05-09 13:52:03,904 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:52:03,904 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:73:20: warning: 'SLICER_PE_BRIDGE_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:52:03,904 ! 73 | static const char* SLICER_PE_BRIDGE_COMMENTS[] = {
2023-05-09 13:52:03,905 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:52:03,905 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:72:20: warning: 'SLICER_PE_GAP_FILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:52:03,905 ! 72 | static const char* SLICER_PE_GAP_FILL_COMMENTS[] = {"gap fill", "move to first gap fill point", NULL};
2023-05-09 13:52:03,905 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:52:03,905 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:69:20: warning: 'SLICER_PE_SOLID_INFILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:52:03,906 ! 69 | static const char* SLICER_PE_SOLID_INFILL_COMMENTS[] = {
2023-05-09 13:52:03,906 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:52:03,906 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:68:20: warning: 'SLICER_PE_INFILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:52:03,906 ! 68 | static const char* SLICER_PE_INFILL_COMMENTS[] = {"infill", "move to first infill point", NULL};
2023-05-09 13:52:03,906 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:52:03,907 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:67:20: warning: 'SLICER_PE_UNKNOWN_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:52:03,907 ! 67 | static const char* SLICER_PE_UNKNOWN_PERIMETER_COMMENTS[] = {"perimeter", "move to first perimeter point", NULL};
2023-05-09 13:52:03,907 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:52:03,907 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:64:20: warning: 'SLICER_PE_INNER_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:52:03,907 ! 64 | static const char* SLICER_PE_INNER_PERIMETER_COMMENTS[] = {
2023-05-09 13:52:03,908 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:52:03,908 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:61:20: warning: 'SLICER_PE_OUTER_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:52:03,908 ! 61 | static const char* SLICER_PE_OUTER_PERIMETER_COMMENTS[] = {
2023-05-09 13:52:03,908 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:52:03,909 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/gcode_position_processor.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/gcode_position_processor.o -O3 -std=c++11
2023-05-09 13:52:03,909 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:915: warning: ignoring '#pragma region location_detection_commands' [-Wunknown-pragmas]
2023-05-09 13:52:03,909 ! 915 | #pragma region location_detection_commands
2023-05-09 13:52:03,909 ! |
2023-05-09 13:52:03,910 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:955: warning: ignoring '#pragma endregion Parse' [-Wunknown-pragmas]
2023-05-09 13:52:03,911 ! 955 | #pragma endregion Parse the list of location detection commands
2023-05-09 13:52:03,911 ! |
2023-05-09 13:52:03,911 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1122: warning: ignoring '#pragma region Extract' [-Wunknown-pragmas]
2023-05-09 13:52:03,911 ! 1122 | #pragma region Extract extruder objects
2023-05-09 13:52:03,912 ! |
2023-05-09 13:52:03,912 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1219: warning: ignoring '#pragma endregion Parse' [-Wunknown-pragmas]
2023-05-09 13:52:03,912 ! 1219 | #pragma endregion Parse extruder objects
2023-05-09 13:52:03,912 ! |
2023-05-09 13:52:03,913 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1221: warning: ignoring '#pragma region Extract' [-Wunknown-pragmas]
2023-05-09 13:52:03,913 ! 1221 | #pragma region Extract firmware extruder offsets from the printer settings
2023-05-09 13:52:03,913 ! |
2023-05-09 13:52:03,913 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1334: warning: ignoring '#pragma endregion Extract' [-Wunknown-pragmas]
2023-05-09 13:52:03,913 ! 1334 | #pragma endregion Extract firmware extruder offsets from the printer settings
2023-05-09 13:52:03,914 ! |
2023-05-09 13:52:03,914 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp: In function 'int main(int, char**)':
2023-05-09 13:52:03,914 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:56:27: warning: 'void PyEval_InitThreads()' is deprecated [-Wdeprecated-declarations]
2023-05-09 13:52:03,914 ! 56 |         PyEval_InitThreads();
2023-05-09 13:52:03,914 ! |         ~~~~~~~~~~~~~~~~~~^~
2023-05-09 13:52:03,915 ! In file included from /usr/include/python3.10/Python.h:130,
2023-05-09 13:52:03,915 ! from octoprint_octolapse/data/lib/c/gcode_position_processor.h:30,
2023-05-09 13:52:03,915 ! from octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:23:
2023-05-09 13:52:03,915 ! /usr/include/python3.10/ceval.h:122:37: note: declared here
2023-05-09 13:52:03,916 ! 122 | Py_DEPRECATED(3.9) PyAPI_FUNC(void) PyEval_InitThreads(void);
2023-05-09 13:52:03,916 ! |                                     ^~~~~~~~~~~~~~~~~~
2023-05-09 13:52:03,916 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp: In function 'PyObject* Initialize(PyObject*, PyObject*)':
2023-05-09 13:52:03,916 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:371:19: warning: unused variable 'p_gcode_position' [-Wunused-variable]
2023-05-09 13:52:03,916 ! 371 |   gcode_position* p_gcode_position = NULL;
2023-05-09 13:52:03,917 ! |                   ^~~~~~~~~~~~~~~~
2023-05-09 13:52:03,917 ! In file included from /usr/include/c++/12.2.1/bits/cxxabi_init_exception.h:38,
2023-05-09 13:52:03,917 ! from /usr/include/c++/12.2.1/bits/exception_ptr.h:38,
2023-05-09 13:52:03,917 ! from /usr/include/c++/12.2.1/exception:168,
2023-05-09 13:52:03,917 ! from /usr/include/c++/12.2.1/stdexcept:38,
2023-05-09 13:52:03,918 ! from /usr/include/c++/12.2.1/system_error:41,
2023-05-09 13:52:03,918 ! from /usr/include/c++/12.2.1/bits/ios_base.h:46,
2023-05-09 13:52:03,918 ! from /usr/include/c++/12.2.1/iomanip:40,
2023-05-09 13:52:03,918 ! from octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:24:
2023-05-09 13:52:03,919 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp: In function 'bool ParseStabilizationArgs(PyObject*, stabilization_args*, PyObject**, PyObject**)':
2023-05-09 13:52:03,919 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1406:12: error: converting to 'bool' from 'std::nullptr_t' requires direct-initialization [-fpermissive]
2023-05-09 13:52:03,919 ! 1406 |     return NULL;
2023-05-09 13:52:03,919 ! |            ^~~~
2023-05-09 13:52:03,919 ! In file included from octoprint_octolapse/data/lib/c/gcode_position_processor.h:37:
2023-05-09 13:52:03,920 ! octoprint_octolapse/data/lib/c/stabilization_smart_gcode.h: At global scope:
2023-05-09 13:52:03,920 ! octoprint_octolapse/data/lib/c/stabilization_smart_gcode.h:5:20: warning: 'SMART_GCODE_STABILIZATION' defined but not used [-Wunused-variable]
2023-05-09 13:52:03,920 ! 5 | static const char* SMART_GCODE_STABILIZATION = "smart_gcode";
2023-05-09 13:52:03,920 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:52:03,920 ! In file included from octoprint_octolapse/data/lib/c/gcode_position_processor.h:36:
2023-05-09 13:52:03,921 ! octoprint_octolapse/data/lib/c/stabilization_smart_layer.h:11:20: warning: 'SMART_LAYER_STABILIZATION' defined but not used [-Wunused-variable]
2023-05-09 13:52:03,921 ! 11 | static const char* SMART_LAYER_STABILIZATION = "smart_layer";
2023-05-09 13:52:03,921 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:52:03,921 ! In file included from octoprint_octolapse/data/lib/c/gcode_position_processor.h:35:
2023-05-09 13:52:03,921 ! octoprint_octolapse/data/lib/c/stabilization.h:44:20: warning: 'send_parsed_command_never' defined but not used [-Wunused-variable]
2023-05-09 13:52:03,922 ! 44 | static const char* send_parsed_command_never = "never";
2023-05-09 13:52:03,922 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:52:03,922 ! octoprint_octolapse/data/lib/c/stabilization.h:43:20: warning: 'send_parsed_command_last' defined but not used [-Wunused-variable]
2023-05-09 13:52:03,922 ! 43 | static const char* send_parsed_command_last = "last";
2023-05-09 13:52:03,922 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:52:03,923 ! octoprint_octolapse/data/lib/c/stabilization.h:42:20: warning: 'send_parsed_command_first' defined but not used [-Wunused-variable]
2023-05-09 13:52:03,923 ! 42 | static const char* send_parsed_command_first = "first";
2023-05-09 13:52:03,923 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:52:03,923 ! octoprint_octolapse/data/lib/c/stabilization.h:41:20: warning: 'snapshot_action' defined but not used [-Wunused-variable]
2023-05-09 13:52:03,923 ! 41 | static const char* snapshot_action = "snapshot";
2023-05-09 13:52:03,924 ! |                    ^~~~~~~~~~~~~~~
2023-05-09 13:52:03,924 ! octoprint_octolapse/data/lib/c/stabilization.h:40:20: warning: 'travel_action' defined but not used [-Wunused-variable]
2023-05-09 13:52:03,924 ! 40 | static const char* travel_action = "travel";
2023-05-09 13:52:03,924 ! |                    ^~~~~~~~~~~~~
2023-05-09 13:52:03,924 ! In file included from octoprint_octolapse/data/lib/c/gcode_position.h:29,
2023-05-09 13:52:03,925 ! from octoprint_octolapse/data/lib/c/gcode_position_processor.h:33:
2023-05-09 13:52:03,925 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:77:20: warning: 'SLICER_PE_SKIRT_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:52:03,925 ! 77 | static const char* SLICER_PE_SKIRT_COMMENTS[] = {"skirt", "move to first skirt point", NULL};
2023-05-09 13:52:03,925 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:52:03,925 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:73:20: warning: 'SLICER_PE_BRIDGE_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:52:03,926 ! 73 | static const char* SLICER_PE_BRIDGE_COMMENTS[] = {
2023-05-09 13:52:03,926 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:52:03,926 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:72:20: warning: 'SLICER_PE_GAP_FILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:52:03,926 ! 72 | static const char* SLICER_PE_GAP_FILL_COMMENTS[] = {"gap fill", "move to first gap fill point", NULL};
2023-05-09 13:52:03,926 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:52:03,927 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:69:20: warning: 'SLICER_PE_SOLID_INFILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:52:03,927 ! 69 | static const char* SLICER_PE_SOLID_INFILL_COMMENTS[] = {
2023-05-09 13:52:03,927 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:52:03,927 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:68:20: warning: 'SLICER_PE_INFILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:52:03,927 ! 68 | static const char* SLICER_PE_INFILL_COMMENTS[] = {"infill", "move to first infill point", NULL};
2023-05-09 13:52:03,928 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:52:03,928 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:67:20: warning: 'SLICER_PE_UNKNOWN_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:52:03,928 ! 67 | static const char* SLICER_PE_UNKNOWN_PERIMETER_COMMENTS[] = {"perimeter", "move to first perimeter point", NULL};
2023-05-09 13:52:03,928 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:52:03,928 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:64:20: warning: 'SLICER_PE_INNER_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:52:03,929 ! 64 | static const char* SLICER_PE_INNER_PERIMETER_COMMENTS[] = {
2023-05-09 13:52:03,929 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:52:03,929 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:61:20: warning: 'SLICER_PE_OUTER_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:52:03,929 ! 61 | static const char* SLICER_PE_OUTER_PERIMETER_COMMENTS[] = {
2023-05-09 13:52:03,929 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:52:03,930 ! error: command '/usr/bin/gcc' failed with exit code 1
2023-05-09 13:52:03,930 ! [end of output]
2023-05-09 13:52:03,930 ! 
2023-05-09 13:52:03,930 ! note: This error originates from a subprocess, and is likely not a problem with pip.
2023-05-09 13:52:03,931 ! error: legacy-install-failure
2023-05-09 13:52:03,931 ! 
2023-05-09 13:52:03,931 ! × Encountered error while trying to install package.
2023-05-09 13:52:03,931 ! ╰─> Octolapse
2023-05-09 13:52:03,931 ! 
2023-05-09 13:52:03,932 ! note: This is an issue with the package mentioned above, not pip.
2023-05-09 13:52:03,932 ! hint: See above for output from the failure.
2023-05-09 13:52:05,446 * Looks like the plugin was already installed. Forcing a reinstall.
2023-05-09 13:52:05,454   /usr/bin/python3 -m pip --disable-pip-version-check install file:///tmp/tmpl5ntjxh2/Octolapse-master.zip --no-cache-dir --ignore-installed --force-reinstall --no-deps
2023-05-09 13:52:11,550 > Processing /tmp/tmpl5ntjxh2/Octolapse-master.zip
2023-05-09 13:52:13,559 > Preparing metadata (setup.py): started
2023-05-09 13:52:27,754 > Preparing metadata (setup.py): finished with status 'done'
2023-05-09 13:52:27,755 > Installing collected packages: Octolapse
2023-05-09 13:52:27,756 > Running setup.py install for Octolapse: started
2023-05-09 13:52:28,264 ! DEPRECATION: Octolapse is being installed using the legacy 'setup.py install' method, because it does not have a 'pyproject.toml' and the 'wheel' package is not installed. pip 23.1 will enforce this behaviour change. A possible replacement is to enable the '--use-pep517' option. Discussion can be found at https://github.com/pypa/pip/issues/8559
2023-05-09 13:53:28,193 > Running setup.py install for Octolapse: still running...
2023-05-09 13:53:29,205 > Running setup.py install for Octolapse: finished with status 'error'
2023-05-09 13:53:29,788 ! error: subprocess-exited-with-error
2023-05-09 13:53:29,790 ! 
2023-05-09 13:53:29,790 ! × Running setup.py install for Octolapse did not run successfully.
2023-05-09 13:53:29,791 ! │ exit code: 1
2023-05-09 13:53:29,791 ! ╰─> [1152 lines of output]
2023-05-09 13:53:29,791 ! likely tags: v0.4.2
2023-05-09 13:53:29,792 ! picking v0.4.2
2023-05-09 13:53:29,792 ! got version from expanded keyword {'version': 'v0.4.2', 'full-revisionid': 'c6c86782cdbfc3590fa4b1bf2e63064eb459b16b', 'dirty': False, 'error': None, 'date': '2023-04-02T10:23:21-0500'}
2023-05-09 13:53:29,792 ! Argon2 passlib backend is not available, not using it for password hashing
2023-05-09 13:53:29,792 ! /tmp/pip-req-build-if9ugm0u/setup.py:58: DeprecationWarning: distutils Version classes are deprecated. Use packaging.version instead.
2023-05-09 13:53:29,793 ! if LooseVersion(octoprint.server.VERSION) < LooseVersion("1.4"):
2023-05-09 13:53:29,794 ! Found packages: {'octoprint_octolapse.test', 'octoprint_octolapse', 'octoprint_octolapse_setuptools'}
2023-05-09 13:53:29,794 ! running install
2023-05-09 13:53:29,794 ! /usr/lib/python3.10/site-packages/setuptools/command/install.py:34: SetuptoolsDeprecationWarning: setup.py install is deprecated. Use build and pip and other standards-based tools.
2023-05-09 13:53:29,794 ! warnings.warn(
2023-05-09 13:53:29,795 ! running build
2023-05-09 13:53:29,795 ! running build_py
2023-05-09 13:53:29,795 ! creating build
2023-05-09 13:53:29,795 ! creating build/lib.linux-aarch64-cpython-310
2023-05-09 13:53:29,796 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:53:29,796 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:53:29,796 ! copying octoprint_octolapse/test/test_settings.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:53:29,797 ! copying octoprint_octolapse/test/test_trigger_layer.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:53:29,797 ! copying octoprint_octolapse/test/__init__.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:53:29,797 ! copying octoprint_octolapse/test/test_extruder.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:53:29,797 ! copying octoprint_octolapse/test/test_parsing.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:53:29,798 ! copying octoprint_octolapse/test/test_render.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:53:29,798 ! copying octoprint_octolapse/test/test_timelapse.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:53:29,798 ! copying octoprint_octolapse/test/test_intersection.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:53:29,798 ! copying octoprint_octolapse/test/test_trigger_gcode.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:53:29,799 ! copying octoprint_octolapse/test/testing_utilities.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:53:29,799 ! copying octoprint_octolapse/test/test_octolapseplugin.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:53:29,799 ! copying octoprint_octolapse/test/test_position.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:53:29,799 ! copying octoprint_octolapse/test/test_trigger_timer.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:53:29,800 ! copying octoprint_octolapse/test/test_command.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:53:29,800 ! copying octoprint_octolapse/test/test_settings_slicer.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:53:29,800 ! copying octoprint_octolapse/test/test_utility.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:53:29,801 ! copying octoprint_octolapse/test/test_snapshotGcode.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:53:29,801 ! copying octoprint_octolapse/test/test_migration_version.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:53:29,801 ! copying octoprint_octolapse/test/test_trigger.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/test
2023-05-09 13:53:29,801 ! copying octoprint_octolapse/snapshot.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:53:29,802 ! copying octoprint_octolapse/log.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:53:29,802 ! copying octoprint_octolapse/__init__.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:53:29,802 ! copying octoprint_octolapse/messenger_worker.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:53:29,802 ! copying octoprint_octolapse/gcode_processor.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:53:29,802 ! copying octoprint_octolapse/gcode_commands.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:53:29,803 ! copying octoprint_octolapse/camera.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:53:29,803 ! copying octoprint_octolapse/position.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:53:29,803 ! copying octoprint_octolapse/stabilization_preprocessing.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:53:29,803 ! copying octoprint_octolapse/utility.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:53:29,803 ! copying octoprint_octolapse/settings_external.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:53:29,804 ! copying octoprint_octolapse/render.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:53:29,804 ! copying octoprint_octolapse/settings_preprocessor.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:53:29,804 ! copying octoprint_octolapse/script.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:53:29,804 ! copying octoprint_octolapse/migration.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:53:29,805 ! copying octoprint_octolapse/_version.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:53:29,805 ! copying octoprint_octolapse/stabilization_gcode.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:53:29,805 ! copying octoprint_octolapse/settings.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:53:29,805 ! copying octoprint_octolapse/error_messages.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:53:29,806 ! copying octoprint_octolapse/trigger.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:53:29,806 ! copying octoprint_octolapse/timelapse.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:53:29,806 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse_setuptools
2023-05-09 13:53:29,806 ! copying octoprint_octolapse_setuptools/__init__.py -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse_setuptools
2023-05-09 13:53:29,807 ! running egg_info
2023-05-09 13:53:29,807 ! creating Octolapse.egg-info
2023-05-09 13:53:29,807 ! writing Octolapse.egg-info/PKG-INFO
2023-05-09 13:53:29,807 ! writing dependency_links to Octolapse.egg-info/dependency_links.txt
2023-05-09 13:53:29,808 ! writing entry points to Octolapse.egg-info/entry_points.txt
2023-05-09 13:53:29,808 ! writing requirements to Octolapse.egg-info/requires.txt
2023-05-09 13:53:29,808 ! writing top-level names to Octolapse.egg-info/top_level.txt
2023-05-09 13:53:29,808 ! writing manifest file 'Octolapse.egg-info/SOURCES.txt'
2023-05-09 13:53:29,809 ! reading manifest file 'Octolapse.egg-info/SOURCES.txt'
2023-05-09 13:53:29,809 ! reading manifest template 'MANIFEST.in'
2023-05-09 13:53:29,809 ! warning: no files found matching 'README.md'
2023-05-09 13:53:29,809 ! warning: no files found matching '*' under directory 'octoprint_octolapse/translations'
2023-05-09 13:53:29,810 ! warning: no files found matching '*' under directory 'octoprint_octolapse/data/images'
2023-05-09 13:53:29,810 ! adding license file 'LICENSE'
2023-05-09 13:53:29,810 ! writing manifest file 'Octolapse.egg-info/SOURCES.txt'
2023-05-09 13:53:29,811 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data' as data is deprecated, please list it in `packages`.
2023-05-09 13:53:29,811 ! !!
2023-05-09 13:53:29,811 ! 
2023-05-09 13:53:29,811 ! 
2023-05-09 13:53:29,811 ! ############################
2023-05-09 13:53:29,812 ! # Package would be ignored #
2023-05-09 13:53:29,812 ! ############################
2023-05-09 13:53:29,812 ! Python recognizes 'octoprint_octolapse.data' as an importable package,
2023-05-09 13:53:29,812 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:53:29,814 ! 
2023-05-09 13:53:29,814 ! 'octoprint_octolapse.data' has been automatically added to the distribution only
2023-05-09 13:53:29,814 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:53:29,815 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:53:29,815 ! 
2023-05-09 13:53:29,815 ! Please make sure that 'octoprint_octolapse.data' is included as a package by using
2023-05-09 13:53:29,815 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:53:29,815 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:53:29,816 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:53:29,816 ! 
2023-05-09 13:53:29,816 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:53:29,816 ! documentation page.
2023-05-09 13:53:29,816 ! 
2023-05-09 13:53:29,817 ! 
2023-05-09 13:53:29,817 ! !!
2023-05-09 13:53:29,817 ! 
2023-05-09 13:53:29,817 ! check.warn(importable)
2023-05-09 13:53:29,817 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.Images' as data is deprecated, please list it in `packages`.
2023-05-09 13:53:29,818 ! !!
2023-05-09 13:53:29,818 ! 
2023-05-09 13:53:29,818 ! 
2023-05-09 13:53:29,818 ! ############################
2023-05-09 13:53:29,818 ! # Package would be ignored #
2023-05-09 13:53:29,819 ! ############################
2023-05-09 13:53:29,819 ! Python recognizes 'octoprint_octolapse.data.Images' as an importable package,
2023-05-09 13:53:29,819 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:53:29,819 ! 
2023-05-09 13:53:29,819 ! 'octoprint_octolapse.data.Images' has been automatically added to the distribution only
2023-05-09 13:53:29,820 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:53:29,820 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:53:29,820 ! 
2023-05-09 13:53:29,820 ! Please make sure that 'octoprint_octolapse.data.Images' is included as a package by using
2023-05-09 13:53:29,820 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:53:29,821 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:53:29,821 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:53:29,822 ! 
2023-05-09 13:53:29,822 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:53:29,823 ! documentation page.
2023-05-09 13:53:29,823 ! 
2023-05-09 13:53:29,823 ! 
2023-05-09 13:53:29,824 ! !!
2023-05-09 13:53:29,824 ! 
2023-05-09 13:53:29,824 ! check.warn(importable)
2023-05-09 13:53:29,824 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.fonts.DejaVu' as data is deprecated, please list it in `packages`.
2023-05-09 13:53:29,824 ! !!
2023-05-09 13:53:29,825 ! 
2023-05-09 13:53:29,825 ! 
2023-05-09 13:53:29,825 ! ############################
2023-05-09 13:53:29,825 ! # Package would be ignored #
2023-05-09 13:53:29,826 ! ############################
2023-05-09 13:53:29,827 ! Python recognizes 'octoprint_octolapse.data.fonts.DejaVu' as an importable package,
2023-05-09 13:53:29,827 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:53:29,827 ! 
2023-05-09 13:53:29,827 ! 'octoprint_octolapse.data.fonts.DejaVu' has been automatically added to the distribution only
2023-05-09 13:53:29,828 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:53:29,828 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:53:29,828 ! 
2023-05-09 13:53:29,828 ! Please make sure that 'octoprint_octolapse.data.fonts.DejaVu' is included as a package by using
2023-05-09 13:53:29,829 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:53:29,829 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:53:29,829 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:53:29,829 ! 
2023-05-09 13:53:29,829 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:53:29,830 ! documentation page.
2023-05-09 13:53:29,830 ! 
2023-05-09 13:53:29,830 ! 
2023-05-09 13:53:29,830 ! !!
2023-05-09 13:53:29,830 ! 
2023-05-09 13:53:29,831 ! check.warn(importable)
2023-05-09 13:53:29,831 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.lib.c' as data is deprecated, please list it in `packages`.
2023-05-09 13:53:29,831 ! !!
2023-05-09 13:53:29,831 ! 
2023-05-09 13:53:29,831 ! 
2023-05-09 13:53:29,832 ! ############################
2023-05-09 13:53:29,832 ! # Package would be ignored #
2023-05-09 13:53:29,832 ! ############################
2023-05-09 13:53:29,832 ! Python recognizes 'octoprint_octolapse.data.lib.c' as an importable package,
2023-05-09 13:53:29,832 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:53:29,833 ! 
2023-05-09 13:53:29,833 ! 'octoprint_octolapse.data.lib.c' has been automatically added to the distribution only
2023-05-09 13:53:29,833 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:53:29,833 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:53:29,833 ! 
2023-05-09 13:53:29,834 ! Please make sure that 'octoprint_octolapse.data.lib.c' is included as a package by using
2023-05-09 13:53:29,834 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:53:29,834 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:53:29,834 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:53:29,834 ! 
2023-05-09 13:53:29,835 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:53:29,835 ! documentation page.
2023-05-09 13:53:29,835 ! 
2023-05-09 13:53:29,835 ! 
2023-05-09 13:53:29,835 ! !!
2023-05-09 13:53:29,836 ! 
2023-05-09 13:53:29,836 ! check.warn(importable)
2023-05-09 13:53:29,836 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.scripts.gcode.cura' as data is deprecated, please list it in `packages`.
2023-05-09 13:53:29,836 ! !!
2023-05-09 13:53:29,836 ! 
2023-05-09 13:53:29,837 ! 
2023-05-09 13:53:29,837 ! ############################
2023-05-09 13:53:29,837 ! # Package would be ignored #
2023-05-09 13:53:29,837 ! ############################
2023-05-09 13:53:29,837 ! Python recognizes 'octoprint_octolapse.data.scripts.gcode.cura' as an importable package,
2023-05-09 13:53:29,838 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:53:29,838 ! 
2023-05-09 13:53:29,838 ! 'octoprint_octolapse.data.scripts.gcode.cura' has been automatically added to the distribution only
2023-05-09 13:53:29,838 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:53:29,838 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:53:29,839 ! 
2023-05-09 13:53:29,839 ! Please make sure that 'octoprint_octolapse.data.scripts.gcode.cura' is included as a package by using
2023-05-09 13:53:29,839 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:53:29,839 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:53:29,839 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:53:29,840 ! 
2023-05-09 13:53:29,840 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:53:29,840 ! documentation page.
2023-05-09 13:53:29,841 ! 
2023-05-09 13:53:29,841 ! 
2023-05-09 13:53:29,841 ! !!
2023-05-09 13:53:29,841 ! 
2023-05-09 13:53:29,841 ! check.warn(importable)
2023-05-09 13:53:29,842 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.scripts.linux' as data is deprecated, please list it in `packages`.
2023-05-09 13:53:29,842 ! !!
2023-05-09 13:53:29,842 ! 
2023-05-09 13:53:29,842 ! 
2023-05-09 13:53:29,842 ! ############################
2023-05-09 13:53:29,843 ! # Package would be ignored #
2023-05-09 13:53:29,843 ! ############################
2023-05-09 13:53:29,843 ! Python recognizes 'octoprint_octolapse.data.scripts.linux' as an importable package,
2023-05-09 13:53:29,843 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:53:29,843 ! 
2023-05-09 13:53:29,843 ! 'octoprint_octolapse.data.scripts.linux' has been automatically added to the distribution only
2023-05-09 13:53:29,844 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:53:29,844 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:53:29,844 ! 
2023-05-09 13:53:29,844 ! Please make sure that 'octoprint_octolapse.data.scripts.linux' is included as a package by using
2023-05-09 13:53:29,845 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:53:29,845 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:53:29,845 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:53:29,845 ! 
2023-05-09 13:53:29,845 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:53:29,845 ! documentation page.
2023-05-09 13:53:29,846 ! 
2023-05-09 13:53:29,846 ! 
2023-05-09 13:53:29,846 ! !!
2023-05-09 13:53:29,846 ! 
2023-05-09 13:53:29,846 ! check.warn(importable)
2023-05-09 13:53:29,847 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.scripts.windows' as data is deprecated, please list it in `packages`.
2023-05-09 13:53:29,847 ! !!
2023-05-09 13:53:29,847 ! 
2023-05-09 13:53:29,847 ! 
2023-05-09 13:53:29,847 ! ############################
2023-05-09 13:53:29,848 ! # Package would be ignored #
2023-05-09 13:53:29,848 ! ############################
2023-05-09 13:53:29,848 ! Python recognizes 'octoprint_octolapse.data.scripts.windows' as an importable package,
2023-05-09 13:53:29,848 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:53:29,848 ! 
2023-05-09 13:53:29,849 ! 'octoprint_octolapse.data.scripts.windows' has been automatically added to the distribution only
2023-05-09 13:53:29,849 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:53:29,849 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:53:29,849 ! 
2023-05-09 13:53:29,849 ! Please make sure that 'octoprint_octolapse.data.scripts.windows' is included as a package by using
2023-05-09 13:53:29,850 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:53:29,850 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:53:29,850 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:53:29,850 ! 
2023-05-09 13:53:29,850 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:53:29,850 ! documentation page.
2023-05-09 13:53:29,851 ! 
2023-05-09 13:53:29,851 ! 
2023-05-09 13:53:29,851 ! !!
2023-05-09 13:53:29,851 ! 
2023-05-09 13:53:29,851 ! check.warn(importable)
2023-05-09 13:53:29,852 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.templates' as data is deprecated, please list it in `packages`.
2023-05-09 13:53:29,852 ! !!
2023-05-09 13:53:29,852 ! 
2023-05-09 13:53:29,852 ! 
2023-05-09 13:53:29,852 ! ############################
2023-05-09 13:53:29,853 ! # Package would be ignored #
2023-05-09 13:53:29,853 ! ############################
2023-05-09 13:53:29,853 ! Python recognizes 'octoprint_octolapse.data.templates' as an importable package,
2023-05-09 13:53:29,853 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:53:29,853 ! 
2023-05-09 13:53:29,854 ! 'octoprint_octolapse.data.templates' has been automatically added to the distribution only
2023-05-09 13:53:29,854 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:53:29,854 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:53:29,854 ! 
2023-05-09 13:53:29,854 ! Please make sure that 'octoprint_octolapse.data.templates' is included as a package by using
2023-05-09 13:53:29,854 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:53:29,855 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:53:29,855 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:53:29,855 ! 
2023-05-09 13:53:29,855 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:53:29,855 ! documentation page.
2023-05-09 13:53:29,856 ! 
2023-05-09 13:53:29,856 ! 
2023-05-09 13:53:29,856 ! !!
2023-05-09 13:53:29,856 ! 
2023-05-09 13:53:29,856 ! check.warn(importable)
2023-05-09 13:53:29,857 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.webcam_types' as data is deprecated, please list it in `packages`.
2023-05-09 13:53:29,857 ! !!
2023-05-09 13:53:29,857 ! 
2023-05-09 13:53:29,857 ! 
2023-05-09 13:53:29,857 ! ############################
2023-05-09 13:53:29,858 ! # Package would be ignored #
2023-05-09 13:53:29,858 ! ############################
2023-05-09 13:53:29,858 ! Python recognizes 'octoprint_octolapse.data.webcam_types' as an importable package,
2023-05-09 13:53:29,858 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:53:29,858 ! 
2023-05-09 13:53:29,858 ! 'octoprint_octolapse.data.webcam_types' has been automatically added to the distribution only
2023-05-09 13:53:29,859 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:53:29,859 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:53:29,859 ! 
2023-05-09 13:53:29,860 ! Please make sure that 'octoprint_octolapse.data.webcam_types' is included as a package by using
2023-05-09 13:53:29,860 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:53:29,860 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:53:29,861 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:53:29,861 ! 
2023-05-09 13:53:29,861 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:53:29,862 ! documentation page.
2023-05-09 13:53:29,862 ! 
2023-05-09 13:53:29,863 ! 
2023-05-09 13:53:29,863 ! !!
2023-05-09 13:53:29,863 ! 
2023-05-09 13:53:29,863 ! check.warn(importable)
2023-05-09 13:53:29,863 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.data.webcam_types.mjpg_streamer' as data is deprecated, please list it in `packages`.
2023-05-09 13:53:29,864 ! !!
2023-05-09 13:53:29,864 ! 
2023-05-09 13:53:29,864 ! 
2023-05-09 13:53:29,864 ! ############################
2023-05-09 13:53:29,865 ! # Package would be ignored #
2023-05-09 13:53:29,865 ! ############################
2023-05-09 13:53:29,865 ! Python recognizes 'octoprint_octolapse.data.webcam_types.mjpg_streamer' as an importable package,
2023-05-09 13:53:29,865 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:53:29,865 ! 
2023-05-09 13:53:29,866 ! 'octoprint_octolapse.data.webcam_types.mjpg_streamer' has been automatically added to the distribution only
2023-05-09 13:53:29,866 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:53:29,866 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:53:29,866 ! 
2023-05-09 13:53:29,866 ! Please make sure that 'octoprint_octolapse.data.webcam_types.mjpg_streamer' is included as a package by using
2023-05-09 13:53:29,867 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:53:29,867 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:53:29,867 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:53:29,867 ! 
2023-05-09 13:53:29,867 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:53:29,868 ! documentation page.
2023-05-09 13:53:29,868 ! 
2023-05-09 13:53:29,868 ! 
2023-05-09 13:53:29,869 ! !!
2023-05-09 13:53:29,869 ! 
2023-05-09 13:53:29,869 ! check.warn(importable)
2023-05-09 13:53:29,869 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.css' as data is deprecated, please list it in `packages`.
2023-05-09 13:53:29,869 ! !!
2023-05-09 13:53:29,870 ! 
2023-05-09 13:53:29,870 ! 
2023-05-09 13:53:29,870 ! ############################
2023-05-09 13:53:29,870 ! # Package would be ignored #
2023-05-09 13:53:29,870 ! ############################
2023-05-09 13:53:29,871 ! Python recognizes 'octoprint_octolapse.static.css' as an importable package,
2023-05-09 13:53:29,871 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:53:29,871 ! 
2023-05-09 13:53:29,871 ! 'octoprint_octolapse.static.css' has been automatically added to the distribution only
2023-05-09 13:53:29,871 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:53:29,872 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:53:29,872 ! 
2023-05-09 13:53:29,872 ! Please make sure that 'octoprint_octolapse.static.css' is included as a package by using
2023-05-09 13:53:29,872 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:53:29,872 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:53:29,873 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:53:29,873 ! 
2023-05-09 13:53:29,873 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:53:29,873 ! documentation page.
2023-05-09 13:53:29,873 ! 
2023-05-09 13:53:29,874 ! 
2023-05-09 13:53:29,874 ! !!
2023-05-09 13:53:29,874 ! 
2023-05-09 13:53:29,874 ! check.warn(importable)
2023-05-09 13:53:29,874 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.docs.help' as data is deprecated, please list it in `packages`.
2023-05-09 13:53:29,875 ! !!
2023-05-09 13:53:29,875 ! 
2023-05-09 13:53:29,875 ! 
2023-05-09 13:53:29,875 ! ############################
2023-05-09 13:53:29,875 ! # Package would be ignored #
2023-05-09 13:53:29,875 ! ############################
2023-05-09 13:53:29,876 ! Python recognizes 'octoprint_octolapse.static.docs.help' as an importable package,
2023-05-09 13:53:29,876 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:53:29,876 ! 
2023-05-09 13:53:29,876 ! 'octoprint_octolapse.static.docs.help' has been automatically added to the distribution only
2023-05-09 13:53:29,877 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:53:29,877 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:53:29,877 ! 
2023-05-09 13:53:29,877 ! Please make sure that 'octoprint_octolapse.static.docs.help' is included as a package by using
2023-05-09 13:53:29,877 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:53:29,878 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:53:29,878 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:53:29,878 ! 
2023-05-09 13:53:29,878 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:53:29,878 ! documentation page.
2023-05-09 13:53:29,878 ! 
2023-05-09 13:53:29,879 ! 
2023-05-09 13:53:29,879 ! !!
2023-05-09 13:53:29,879 ! 
2023-05-09 13:53:29,879 ! check.warn(importable)
2023-05-09 13:53:29,879 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.img' as data is deprecated, please list it in `packages`.
2023-05-09 13:53:29,880 ! !!
2023-05-09 13:53:29,880 ! 
2023-05-09 13:53:29,880 ! 
2023-05-09 13:53:29,881 ! ############################
2023-05-09 13:53:29,881 ! # Package would be ignored #
2023-05-09 13:53:29,881 ! ############################
2023-05-09 13:53:29,881 ! Python recognizes 'octoprint_octolapse.static.img' as an importable package,
2023-05-09 13:53:29,882 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:53:29,882 ! 
2023-05-09 13:53:29,882 ! 'octoprint_octolapse.static.img' has been automatically added to the distribution only
2023-05-09 13:53:29,882 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:53:29,882 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:53:29,882 ! 
2023-05-09 13:53:29,883 ! Please make sure that 'octoprint_octolapse.static.img' is included as a package by using
2023-05-09 13:53:29,883 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:53:29,883 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:53:29,883 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:53:29,883 ! 
2023-05-09 13:53:29,884 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:53:29,884 ! documentation page.
2023-05-09 13:53:29,884 ! 
2023-05-09 13:53:29,884 ! 
2023-05-09 13:53:29,884 ! !!
2023-05-09 13:53:29,885 ! 
2023-05-09 13:53:29,885 ! check.warn(importable)
2023-05-09 13:53:29,885 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.js' as data is deprecated, please list it in `packages`.
2023-05-09 13:53:29,885 ! !!
2023-05-09 13:53:29,885 ! 
2023-05-09 13:53:29,886 ! 
2023-05-09 13:53:29,886 ! ############################
2023-05-09 13:53:29,886 ! # Package would be ignored #
2023-05-09 13:53:29,886 ! ############################
2023-05-09 13:53:29,886 ! Python recognizes 'octoprint_octolapse.static.js' as an importable package,
2023-05-09 13:53:29,886 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:53:29,887 ! 
2023-05-09 13:53:29,887 ! 'octoprint_octolapse.static.js' has been automatically added to the distribution only
2023-05-09 13:53:29,887 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:53:29,887 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:53:29,887 ! 
2023-05-09 13:53:29,888 ! Please make sure that 'octoprint_octolapse.static.js' is included as a package by using
2023-05-09 13:53:29,888 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:53:29,888 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:53:29,888 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:53:29,888 ! 
2023-05-09 13:53:29,889 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:53:29,889 ! documentation page.
2023-05-09 13:53:29,889 ! 
2023-05-09 13:53:29,889 ! 
2023-05-09 13:53:29,889 ! !!
2023-05-09 13:53:29,890 ! 
2023-05-09 13:53:29,890 ! check.warn(importable)
2023-05-09 13:53:29,890 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.static.js.webcams.mjpg_streamer' as data is deprecated, please list it in `packages`.
2023-05-09 13:53:29,890 ! !!
2023-05-09 13:53:29,890 ! 
2023-05-09 13:53:29,891 ! 
2023-05-09 13:53:29,891 ! ############################
2023-05-09 13:53:29,891 ! # Package would be ignored #
2023-05-09 13:53:29,891 ! ############################
2023-05-09 13:53:29,891 ! Python recognizes 'octoprint_octolapse.static.js.webcams.mjpg_streamer' as an importable package,
2023-05-09 13:53:29,892 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:53:29,892 ! 
2023-05-09 13:53:29,892 ! 'octoprint_octolapse.static.js.webcams.mjpg_streamer' has been automatically added to the distribution only
2023-05-09 13:53:29,892 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:53:29,892 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:53:29,893 ! 
2023-05-09 13:53:29,893 ! Please make sure that 'octoprint_octolapse.static.js.webcams.mjpg_streamer' is included as a package by using
2023-05-09 13:53:29,893 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:53:29,893 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:53:29,893 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:53:29,894 ! 
2023-05-09 13:53:29,894 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:53:29,894 ! documentation page.
2023-05-09 13:53:29,894 ! 
2023-05-09 13:53:29,894 ! 
2023-05-09 13:53:29,895 ! !!
2023-05-09 13:53:29,895 ! 
2023-05-09 13:53:29,895 ! check.warn(importable)
2023-05-09 13:53:29,895 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.templates' as data is deprecated, please list it in `packages`.
2023-05-09 13:53:29,895 ! !!
2023-05-09 13:53:29,895 ! 
2023-05-09 13:53:29,896 ! 
2023-05-09 13:53:29,896 ! ############################
2023-05-09 13:53:29,896 ! # Package would be ignored #
2023-05-09 13:53:29,896 ! ############################
2023-05-09 13:53:29,896 ! Python recognizes 'octoprint_octolapse.templates' as an importable package,
2023-05-09 13:53:29,897 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:53:29,897 ! 
2023-05-09 13:53:29,897 ! 'octoprint_octolapse.templates' has been automatically added to the distribution only
2023-05-09 13:53:29,897 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:53:29,897 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:53:29,898 ! 
2023-05-09 13:53:29,898 ! Please make sure that 'octoprint_octolapse.templates' is included as a package by using
2023-05-09 13:53:29,898 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:53:29,898 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:53:29,898 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:53:29,899 ! 
2023-05-09 13:53:29,899 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:53:29,899 ! documentation page.
2023-05-09 13:53:29,899 ! 
2023-05-09 13:53:29,899 ! 
2023-05-09 13:53:29,900 ! !!
2023-05-09 13:53:29,900 ! 
2023-05-09 13:53:29,900 ! check.warn(importable)
2023-05-09 13:53:29,901 ! /usr/lib/python3.10/site-packages/setuptools/command/build_py.py:202: SetuptoolsDeprecationWarning:     Installing 'octoprint_octolapse.templates.webcams.mjpg_streamer' as data is deprecated, please list it in `packages`.
2023-05-09 13:53:29,901 ! !!
2023-05-09 13:53:29,901 ! 
2023-05-09 13:53:29,901 ! 
2023-05-09 13:53:29,901 ! ############################
2023-05-09 13:53:29,902 ! # Package would be ignored #
2023-05-09 13:53:29,902 ! ############################
2023-05-09 13:53:29,902 ! Python recognizes 'octoprint_octolapse.templates.webcams.mjpg_streamer' as an importable package,
2023-05-09 13:53:29,902 ! but it is not listed in the `packages` configuration of setuptools.
2023-05-09 13:53:29,902 ! 
2023-05-09 13:53:29,903 ! 'octoprint_octolapse.templates.webcams.mjpg_streamer' has been automatically added to the distribution only
2023-05-09 13:53:29,903 ! because it may contain data files, but this behavior is likely to change
2023-05-09 13:53:29,903 ! in future versions of setuptools (and therefore is considered deprecated).
2023-05-09 13:53:29,903 ! 
2023-05-09 13:53:29,903 ! Please make sure that 'octoprint_octolapse.templates.webcams.mjpg_streamer' is included as a package by using
2023-05-09 13:53:29,904 ! the `packages` configuration field or the proper discovery methods
2023-05-09 13:53:29,904 ! (for example by using `find_namespace_packages(...)`/`find_namespace:`
2023-05-09 13:53:29,904 ! instead of `find_packages(...)`/`find:`).
2023-05-09 13:53:29,904 ! 
2023-05-09 13:53:29,904 ! You can read more about "package discovery" and "data files" on setuptools
2023-05-09 13:53:29,905 ! documentation page.
2023-05-09 13:53:29,905 ! 
2023-05-09 13:53:29,905 ! 
2023-05-09 13:53:29,905 ! !!
2023-05-09 13:53:29,905 ! 
2023-05-09 13:53:29,905 ! check.warn(importable)
2023-05-09 13:53:29,906 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:53:29,906 ! copying octoprint_octolapse/data/settings_default_0.3.3rc3.dev0.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:53:29,906 ! copying octoprint_octolapse/data/settings_default_0.4.0.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:53:29,906 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev0.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:53:29,906 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev2.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:53:29,907 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev3.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:53:29,907 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev4.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:53:29,907 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev5.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:53:29,907 ! copying octoprint_octolapse/data/settings_default_0.4.0rc1.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:53:29,907 ! copying octoprint_octolapse/data/settings_default_0.4.0rc2.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:53:29,907 ! copying octoprint_octolapse/data/settings_default_0.4.0rc3.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:53:29,908 ! copying octoprint_octolapse/data/settings_default_current.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:53:29,908 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 13:53:29,909 ! copying octoprint_octolapse/data/Images/no-camera-selected.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 13:53:29,909 ! copying octoprint_octolapse/data/Images/no-image-available.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 13:53:29,910 ! copying octoprint_octolapse/data/Images/no_snapshot.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 13:53:29,910 ! copying octoprint_octolapse/data/Images/test-snapshot-image.jpg -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/Images
2023-05-09 13:53:29,910 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/fonts
2023-05-09 13:53:29,910 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/fonts/DejaVu
2023-05-09 13:53:29,910 ! copying octoprint_octolapse/data/fonts/DejaVu/DejaVuSansMono.ttf -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/fonts/DejaVu
2023-05-09 13:53:29,911 ! copying octoprint_octolapse/data/fonts/DejaVu/license.txt -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/fonts/DejaVu
2023-05-09 13:53:29,911 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib
2023-05-09 13:53:29,911 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:53:29,911 ! copying octoprint_octolapse/data/lib/c/extruder.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:53:29,911 ! copying octoprint_octolapse/data/lib/c/extruder.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:53:29,911 ! copying octoprint_octolapse/data/lib/c/gcode_comment_processor.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:53:29,912 ! copying octoprint_octolapse/data/lib/c/gcode_comment_processor.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:53:29,912 ! copying octoprint_octolapse/data/lib/c/gcode_parser.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:53:29,912 ! copying octoprint_octolapse/data/lib/c/gcode_parser.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:53:29,912 ! copying octoprint_octolapse/data/lib/c/gcode_position.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:53:29,912 ! copying octoprint_octolapse/data/lib/c/gcode_position.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:53:29,913 ! copying octoprint_octolapse/data/lib/c/gcode_position_processor.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:53:29,913 ! copying octoprint_octolapse/data/lib/c/gcode_position_processor.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:53:29,913 ! copying octoprint_octolapse/data/lib/c/logging.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:53:29,913 ! copying octoprint_octolapse/data/lib/c/logging.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:53:29,913 ! copying octoprint_octolapse/data/lib/c/parsed_command.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:53:29,914 ! copying octoprint_octolapse/data/lib/c/parsed_command.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:53:29,914 ! copying octoprint_octolapse/data/lib/c/parsed_command_parameter.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:53:29,914 ! copying octoprint_octolapse/data/lib/c/parsed_command_parameter.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:53:29,914 ! copying octoprint_octolapse/data/lib/c/position.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:53:29,914 ! copying octoprint_octolapse/data/lib/c/position.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:53:29,915 ! copying octoprint_octolapse/data/lib/c/python_helpers.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:53:29,915 ! copying octoprint_octolapse/data/lib/c/python_helpers.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:53:29,915 ! copying octoprint_octolapse/data/lib/c/snapshot_plan.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:53:29,915 ! copying octoprint_octolapse/data/lib/c/snapshot_plan.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:53:29,915 ! copying octoprint_octolapse/data/lib/c/snapshot_plan_step.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:53:29,915 ! copying octoprint_octolapse/data/lib/c/snapshot_plan_step.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:53:29,916 ! copying octoprint_octolapse/data/lib/c/stabilization.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:53:29,916 ! copying octoprint_octolapse/data/lib/c/stabilization.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:53:29,916 ! copying octoprint_octolapse/data/lib/c/stabilization_results.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:53:29,916 ! copying octoprint_octolapse/data/lib/c/stabilization_results.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:53:29,916 ! copying octoprint_octolapse/data/lib/c/stabilization_smart_gcode.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:53:29,917 ! copying octoprint_octolapse/data/lib/c/stabilization_smart_gcode.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:53:29,917 ! copying octoprint_octolapse/data/lib/c/stabilization_smart_layer.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:53:29,917 ! copying octoprint_octolapse/data/lib/c/stabilization_smart_layer.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:53:29,917 ! copying octoprint_octolapse/data/lib/c/stabilization_snap_to_print.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:53:29,917 ! copying octoprint_octolapse/data/lib/c/stabilization_snap_to_print.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:53:29,918 ! copying octoprint_octolapse/data/lib/c/trigger_position.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:53:29,918 ! copying octoprint_octolapse/data/lib/c/trigger_position.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:53:29,918 ! copying octoprint_octolapse/data/lib/c/utilities.cpp -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:53:29,918 ! copying octoprint_octolapse/data/lib/c/utilities.h -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:53:29,918 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts
2023-05-09 13:53:29,919 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode
2023-05-09 13:53:29,919 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:53:29,919 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:53:29,919 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_02_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:53:29,919 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_03_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:53:29,920 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_04_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:53:29,920 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_05_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:53:29,921 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_06_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:53:29,921 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_07_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:53:29,921 ! copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_08_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura
2023-05-09 13:53:29,921 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:53:29,921 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:53:29,922 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_02_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:53:29,922 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_03_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:53:29,922 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_04_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:53:29,922 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_05_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:53:29,922 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_06_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:53:29,923 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_07_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:53:29,923 ! copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_08_extruders.gcode -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/gcode/cura/4.2
2023-05-09 13:53:29,923 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:53:29,923 ! copying octoprint_octolapse/data/scripts/linux/capture_image_leave_on_camera.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:53:29,924 ! copying octoprint_octolapse/data/scripts/linux/download-from-camera-and-rename.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:53:29,924 ! copying octoprint_octolapse/data/scripts/linux/initialize_dslr.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:53:29,924 ! copying octoprint_octolapse/data/scripts/linux/move_snapshots_to_target.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:53:29,924 ! copying octoprint_octolapse/data/scripts/linux/take_snapshot_and_download.sh -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/linux
2023-05-09 13:53:29,924 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/windows
2023-05-09 13:53:29,925 ! copying octoprint_octolapse/data/scripts/windows/take_snapshot_and_download.bat -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/scripts/windows
2023-05-09 13:53:29,925 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/templates
2023-05-09 13:53:29,925 ! copying octoprint_octolapse/data/templates/cura_gcode_settings_template.txt -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/templates
2023-05-09 13:53:29,925 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types
2023-05-09 13:53:29,926 ! copying octoprint_octolapse/data/webcam_types/camera_types.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types
2023-05-09 13:53:29,926 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:53:29,926 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/logitech_c250.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:53:29,926 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/logitech_c920.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:53:29,926 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/logitech_c920_2.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:53:29,927 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/logitech_c920_3.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:53:29,927 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/raspi_cam_v2.1.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:53:29,927 ! copying octoprint_octolapse/data/webcam_types/mjpg_streamer/raspi_cam_v2.json -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/data/webcam_types/mjpg_streamer
2023-05-09 13:53:29,927 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static
2023-05-09 13:53:29,927 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/css
2023-05-09 13:53:29,928 ! copying octoprint_octolapse/static/css/jquery.minicolors.css -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/css
2023-05-09 13:53:29,928 ! copying octoprint_octolapse/static/css/jquery.minicolors.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/css
2023-05-09 13:53:29,928 ! copying octoprint_octolapse/static/css/octolapse.css -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/css
2023-05-09 13:53:29,928 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs
2023-05-09 13:53:29,928 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,929 ! copying octoprint_octolapse/static/docs/help/dialog.renderings.in_process.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,929 ! copying octoprint_octolapse/static/docs/help/dialog.renderings.unfinished.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,929 ! copying octoprint_octolapse/static/docs/help/dialog.timelapse_files.snapshot_archive.import.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,929 ! copying octoprint_octolapse/static/docs/help/dialog.timelapse_files.snapshot_archive.tab.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,929 ! copying octoprint_octolapse/static/docs/help/dialog.timelapse_files.timelapse.tab.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,930 ! copying octoprint_octolapse/static/docs/help/error_help_error_not_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,930 ! copying octoprint_octolapse/static/docs/help/error_help_init_automatic_slicer_no_settings_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,930 ! copying octoprint_octolapse/static/docs/help/error_help_init_automatic_slicer_settings_missing.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,930 ! copying octoprint_octolapse/static/docs/help/error_help_init_before_print_start_camera_script_apply_failed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,930 ! copying octoprint_octolapse/static/docs/help/error_help_init_camera_init_test_failed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,930 ! copying octoprint_octolapse/static/docs/help/error_help_init_camera_settings_apply_failed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,931 ! copying octoprint_octolapse/static/docs/help/error_help_init_cant_print_from_sd.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,931 ! copying octoprint_octolapse/static/docs/help/error_help_init_directory_test_failed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,931 ! copying octoprint_octolapse/static/docs/help/error_help_init_ffmpeg_not_found_at_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,931 ! copying octoprint_octolapse/static/docs/help/error_help_init_ffmpeg_path_not_set.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,931 ! copying octoprint_octolapse/static/docs/help/error_help_init_ffmpeg_path_retrieve_exception.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,932 ! copying octoprint_octolapse/static/docs/help/error_help_init_incorrect_octoprint_version.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,932 ! copying octoprint_octolapse/static/docs/help/error_help_init_incorrect_print_start_state.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,932 ! copying octoprint_octolapse/static/docs/help/error_help_init_m114_not_supported.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,932 ! copying octoprint_octolapse/static/docs/help/error_help_init_manual_slicer_settings_missing.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,932 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_current_job_data_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,933 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_current_job_file_data_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,933 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_enabled_cameras.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,933 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_gcode_filepath_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,933 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_printer_profile_exists.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,933 ! copying octoprint_octolapse/static/docs/help/error_help_init_no_printer_profile_selected.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,934 ! copying octoprint_octolapse/static/docs/help/error_help_init_octolapse_is_disabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,934 ! copying octoprint_octolapse/static/docs/help/error_help_init_overlay_font_path_not_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,934 ! copying octoprint_octolapse/static/docs/help/error_help_init_printer_not_configured.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,934 ! copying octoprint_octolapse/static/docs/help/error_help_init_rendering_file_template_invalid.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,934 ! copying octoprint_octolapse/static/docs/help/error_help_init_timelapse_start_exception.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,935 ! copying octoprint_octolapse/static/docs/help/error_help_init_too_few_extruders_defined.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,935 ! copying octoprint_octolapse/static/docs/help/error_help_init_too_few_extruders_offsets_defined.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,935 ! copying octoprint_octolapse/static/docs/help/error_help_init_unable_to_accept_snapshot_plan.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,935 ! copying octoprint_octolapse/static/docs/help/error_help_init_unexpected_exception.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,935 ! copying octoprint_octolapse/static/docs/help/error_help_init_unknown_file_origin.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,936 ! copying octoprint_octolapse/static/docs/help/error_help_not_a_valid_error_dict.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,936 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_axis_mode_e_unknown.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,936 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_axis_mode_xyz_unknown.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,936 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_incorrect_trigger_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,936 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_no_definite_position.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,937 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_no_metric_units.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,937 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_no_snapshot_commands_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,937 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_no_snapshot_plans_returned.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,937 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_printer_not_primed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,937 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_unhandled_exception.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,938 ! copying octoprint_octolapse/static/docs/help/error_help_preprocessor_unknown_trigger_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,938 ! copying octoprint_octolapse/static/docs/help/error_help_rendering_archive_import_no_files_found.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,938 ! copying octoprint_octolapse/static/docs/help/error_help_rendering_archive_import_zip_file_corrupt.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,938 ! copying octoprint_octolapse/static/docs/help/error_help_rendering_archive_import_zip_file_too_large.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,938 ! copying octoprint_octolapse/static/docs/help/error_help_settings_slicer_simplify3d_duplicate_toolhead_numbers.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,938 ! copying octoprint_octolapse/static/docs/help/error_help_settings_slicer_simplify3d_extruder_count_mismatch.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,939 ! copying octoprint_octolapse/static/docs/help/error_help_settings_slicer_simplify3d_max_extruder_count_exceeded.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,939 ! copying octoprint_octolapse/static/docs/help/error_help_settings_slicer_simplify3d_unexpected_max_toolhead_number.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,939 ! copying octoprint_octolapse/static/docs/help/error_help_timelapse_cannot_aquire_job_lock.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,939 ! copying octoprint_octolapse/static/docs/help/main_settings.auto_reload_frames.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,939 ! copying octoprint_octolapse/static/docs/help/main_settings.auto_reload_latest_snapshot.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,940 ! copying octoprint_octolapse/static/docs/help/main_settings.automatic_update_interval_days.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,940 ! copying octoprint_octolapse/static/docs/help/main_settings.automatic_updates_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,940 ! copying octoprint_octolapse/static/docs/help/main_settings.cancel_print_on_startup_error.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,941 ! copying octoprint_octolapse/static/docs/help/main_settings.enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,941 ! copying octoprint_octolapse/static/docs/help/main_settings.is_test_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,941 ! copying octoprint_octolapse/static/docs/help/main_settings.preview_snapshot_plan_autoclose.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,941 ! copying octoprint_octolapse/static/docs/help/main_settings.preview_snapshot_plan_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,941 ! copying octoprint_octolapse/static/docs/help/main_settings.preview_snapshot_plans.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,942 ! copying octoprint_octolapse/static/docs/help/main_settings.show_extruder_state_changes.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,942 ! copying octoprint_octolapse/static/docs/help/main_settings.show_navbar_icon.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,942 ! copying octoprint_octolapse/static/docs/help/main_settings.show_navbar_when_not_printing.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,942 ! copying octoprint_octolapse/static/docs/help/main_settings.show_position_changes.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,942 ! copying octoprint_octolapse/static/docs/help/main_settings.show_printer_state_changes.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,943 ! copying octoprint_octolapse/static/docs/help/main_settings.show_snapshot_plan_information.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,943 ! copying octoprint_octolapse/static/docs/help/main_settings.show_trigger_state_changes.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,943 ! copying octoprint_octolapse/static/docs/help/main_settings.snapshot_archive_directory.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,943 ! copying octoprint_octolapse/static/docs/help/main_settings.temporary_directory.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,943 ! copying octoprint_octolapse/static/docs/help/main_settings.timelapse_directory.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,943 ! copying octoprint_octolapse/static/docs/help/profiles.camera.apply_settings_at_startup.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,944 ! copying octoprint_octolapse/static/docs/help/profiles.camera.apply_settings_before_print.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,944 ! copying octoprint_octolapse/static/docs/help/profiles.camera.apply_settings_when_disabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,944 ! copying octoprint_octolapse/static/docs/help/profiles.camera.camera_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,944 ! copying octoprint_octolapse/static/docs/help/profiles.camera.delay.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,945 ! copying octoprint_octolapse/static/docs/help/profiles.camera.edit_cutsom_image_preferences.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,945 ! copying octoprint_octolapse/static/docs/help/profiles.camera.external_camera_snapshot_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,945 ! copying octoprint_octolapse/static/docs/help/profiles.camera.gcode_camera_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,945 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_after_render_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,945 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_after_snapshot_gcode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,945 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_after_snapshot_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,946 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_before_render_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,946 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_before_snapshot_gcode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,946 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_before_snapshot_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,946 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_print_end_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,946 ! copying octoprint_octolapse/static/docs/help/profiles.camera.on_print_start_script.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,947 ! copying octoprint_octolapse/static/docs/help/profiles.camera.snapshot_transpose.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,947 ! copying octoprint_octolapse/static/docs/help/profiles.camera.stream_template.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,947 ! copying octoprint_octolapse/static/docs/help/profiles.camera.timeout_ms.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,947 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.address.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,947 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.enable_custom_image_preferences.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,948 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.ignore_ssl_error.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,948 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.1.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,948 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029518.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,948 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029519.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,948 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029538.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,949 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029670.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,949 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029671.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,949 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029675.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,949 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094849.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,949 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094850.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,950 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094851.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,950 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094856.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,950 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094857.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,950 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094858.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,950 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094860.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,950 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094861.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,951 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094867.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,951 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094868.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,951 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094870.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,951 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094871.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,951 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094872.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,952 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094873.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,952 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094874.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,952 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10291459.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,952 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963776.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,952 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963777.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,953 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963778.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,953 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963788.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,953 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963790.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,953 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963791.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,953 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963795.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,954 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963796.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,954 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963797.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,954 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963800.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,954 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963802.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,954 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963803.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,955 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963804.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,955 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963807.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,955 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963810.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,955 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963818.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,955 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.password.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,955 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.snapshot_request_template.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,956 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.stream_download.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,956 ! copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.username.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,956 ! copying octoprint_octolapse/static/docs/help/profiles.library.is_custom.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,956 ! copying octoprint_octolapse/static/docs/help/profiles.logging.enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,956 ! copying octoprint_octolapse/static/docs/help/profiles.logging.log_all_errors.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,957 ! copying octoprint_octolapse/static/docs/help/profiles.logging.log_to_console.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,957 ! copying octoprint_octolapse/static/docs/help/profiles.logging.logging_level.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,957 ! copying octoprint_octolapse/static/docs/help/profiles.logging.manage_log_files.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,957 ! copying octoprint_octolapse/static/docs/help/profiles.logging.modules_to_log.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,957 ! copying octoprint_octolapse/static/docs/help/profiles.printer.auto_detect_position.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,958 ! copying octoprint_octolapse/static/docs/help/profiles.printer.auto_position_detection_commands.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,958 ! copying octoprint_octolapse/static/docs/help/profiles.printer.automatic_configuration.is_automatic.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,958 ! copying octoprint_octolapse/static/docs/help/profiles.printer.automatic_configuration.make.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,958 ! copying octoprint_octolapse/static/docs/help/profiles.printer.automatic_configuration.model.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,958 ! copying octoprint_octolapse/static/docs/help/profiles.printer.bed_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,959 ! copying octoprint_octolapse/static/docs/help/profiles.printer.custom_bounding_box.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,959 ! copying octoprint_octolapse/static/docs/help/profiles.printer.default_extruder.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,959 ! copying octoprint_octolapse/static/docs/help/profiles.printer.default_firmware_retractions.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,959 ! copying octoprint_octolapse/static/docs/help/profiles.printer.default_firmware_retractions_zhop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,959 ! copying octoprint_octolapse/static/docs/help/profiles.printer.e_axis_default_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,960 ! copying octoprint_octolapse/static/docs/help/profiles.printer.extruder_offsets.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,960 ! copying octoprint_octolapse/static/docs/help/profiles.printer.g90_influences_extruder.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,960 ! copying octoprint_octolapse/static/docs/help/profiles.printer.gocde_axis_compatibility_mode_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,961 ! copying octoprint_octolapse/static/docs/help/profiles.printer.home_axis_gcode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,961 ! copying octoprint_octolapse/static/docs/help/profiles.printer.invert_e.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,961 ! copying octoprint_octolapse/static/docs/help/profiles.printer.invert_x.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,961 ! copying octoprint_octolapse/static/docs/help/profiles.printer.invert_y.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,961 ! copying octoprint_octolapse/static/docs/help/profiles.printer.invert_z.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,962 ! copying octoprint_octolapse/static/docs/help/profiles.printer.minimum_layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,962 ! copying octoprint_octolapse/static/docs/help/profiles.printer.num_extruders.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,962 ! copying octoprint_octolapse/static/docs/help/profiles.printer.origin_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,962 ! copying octoprint_octolapse/static/docs/help/profiles.printer.override_octoprint_profile_settings.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,962 ! copying octoprint_octolapse/static/docs/help/profiles.printer.priming_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,963 ! copying octoprint_octolapse/static/docs/help/profiles.printer.restrict_snapshot_area.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,963 ! copying octoprint_octolapse/static/docs/help/profiles.printer.shared_extruder.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,963 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicer_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,963 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.automatic.continue_on_failure.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,963 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.automatic.disable_automatic_save.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,964 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.4_2.speed_z_hop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,964 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,964 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.max_feedrate_z_override.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,964 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_amount.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,965 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_enable.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,965 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_hop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,965 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_hop_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,965 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_prime_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,965 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_retract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,965 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.smooth_spiralized_contours.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,966 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.speed_travel.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,966 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.axis_speed_display_unit_options.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,966 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.deretract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,966 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,966 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.retract_before_move.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,967 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.retract_length.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,967 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.retract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,967 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.travel_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,967 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.vase_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,968 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.z_hop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,968 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.z_travel_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,968 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.extruder_use_retract.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,968 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,968 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.retraction_distance.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,969 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.retraction_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,969 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.retraction_vertical_lift.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,969 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.vase_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,969 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.x_y_axis_movement_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,969 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.z_axis_movement_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,970 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.deretract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,970 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.layer_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,970 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.retract_length.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,970 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.retract_lift.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,970 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.retract_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,970 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.travel_speed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,971 ! copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.vase_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,971 ! copying octoprint_octolapse/static/docs/help/profiles.printer.snapshot_command.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,971 ! copying octoprint_octolapse/static/docs/help/profiles.printer.suppress_snapshot_command_always.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,971 ! copying octoprint_octolapse/static/docs/help/profiles.printer.units_default.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,971 ! copying octoprint_octolapse/static/docs/help/profiles.printer.xyz_axes_default_mode.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,972 ! copying octoprint_octolapse/static/docs/help/profiles.printer.zero_based_extruder.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,972 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.archive_snapshots.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,972 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.bitrate.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,972 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.constant_rate_factor.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,972 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.enable_watermark.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,973 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,973 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.fps.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,973 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.fps_calculation_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,973 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.max_fps.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,973 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.min_fps.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,973 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.output_format.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,974 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.output_template.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,974 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_font_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,974 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_font_size.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,974 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_outline_color.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,974 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_outline_width.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,975 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_preview.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,975 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_alignment.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,975 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_color.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,975 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_halign.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,975 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_pos_xy.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,976 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_template.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,976 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_template_current_time.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,976 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_template_time_elapsed.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,976 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_valign.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,976 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.post_roll_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,977 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.pre_roll_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,977 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.run_length_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,977 ! copying octoprint_octolapse/static/docs/help/profiles.rendering.thread_count.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,977 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.wait_for_moves_to_finish.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,977 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_fixed_coordinate.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,977 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_fixed_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,978 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_fixed_path_invert_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,978 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_fixed_path_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,978 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_relative.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,978 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_relative_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,978 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_relative_path_invert_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,979 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_relative_path_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,979 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,979 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_fixed_coordinate.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,979 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_fixed_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,980 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_fixed_path_invert_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,980 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_fixed_path_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,980 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_relative.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,981 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_relative_path.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,981 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_relative_path_invert_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,981 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_relative_path_loop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,981 ! copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,981 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.calculate_intersections.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,982 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.extruder_state_requirements_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,982 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.layer_trigger_height.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,982 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.position_restriction_shape.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,982 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.position_restriction_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,983 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.position_restrictions_enabled.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,983 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.require_zhop.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,983 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.smart_layer_disable_z_lift.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,983 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.smart_layer_snap_to_print_high_quality.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,983 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.smart_layer_snap_to_print_smooth.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,984 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.smart_layer_trigger_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,984 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.timer_trigger_seconds.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,984 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.trigger_subtype.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,984 ! copying octoprint_octolapse/static/docs/help/profiles.trigger.trigger_type.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,984 ! copying octoprint_octolapse/static/docs/help/quality_issues_fast_trigger.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,985 ! copying octoprint_octolapse/static/docs/help/quality_issues_low_quality_snap_to_print.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,985 ! copying octoprint_octolapse/static/docs/help/quality_issues_no_print_features_detected.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,985 ! copying octoprint_octolapse/static/docs/help/settings.import.import_method.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,985 ! copying octoprint_octolapse/static/docs/help/settings.import.import_text.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,985 ! copying octoprint_octolapse/static/docs/help/snapshot_plan_missed_snapshots.md -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/docs/help
2023-05-09 13:53:29,986 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/img
2023-05-09 13:53:29,986 ! copying octoprint_octolapse/static/img/watermark.png -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/img
2023-05-09 13:53:29,986 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:53:29,986 ! copying octoprint_octolapse/static/js/jquery.minicolors.min.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:53:29,986 ! copying octoprint_octolapse/static/js/jquery.validate.min.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:53:29,987 ! copying octoprint_octolapse/static/js/octolapse.dialog.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:53:29,987 ! copying octoprint_octolapse/static/js/octolapse.dialog.renderings.in_process.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:53:29,987 ! copying octoprint_octolapse/static/js/octolapse.dialog.renderings.unfinished.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:53:29,987 ! copying octoprint_octolapse/static/js/octolapse.dialog.timelapse_files.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:53:29,987 ! copying octoprint_octolapse/static/js/octolapse.file_browser.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:53:29,987 ! copying octoprint_octolapse/static/js/octolapse.help.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:53:29,988 ! copying octoprint_octolapse/static/js/octolapse.helpers.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:53:29,988 ! copying octoprint_octolapse/static/js/octolapse.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:53:29,988 ! copying octoprint_octolapse/static/js/octolapse.profiles.camera.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:53:29,988 ! copying octoprint_octolapse/static/js/octolapse.profiles.camera.webcam.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:53:29,988 ! copying octoprint_octolapse/static/js/octolapse.profiles.camera.webcam.mjpg_streamer.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:53:29,989 ! copying octoprint_octolapse/static/js/octolapse.profiles.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:53:29,989 ! copying octoprint_octolapse/static/js/octolapse.profiles.library.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:53:29,989 ! copying octoprint_octolapse/static/js/octolapse.profiles.logging.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:53:29,989 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:53:29,989 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.slicer.cura.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:53:29,990 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.slicer.other.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:53:29,990 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.slicer.simplify_3d.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:53:29,990 ! copying octoprint_octolapse/static/js/octolapse.profiles.printer.slicer.slic3r_pe.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:53:29,990 ! copying octoprint_octolapse/static/js/octolapse.profiles.rendering.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:53:29,990 ! copying octoprint_octolapse/static/js/octolapse.profiles.stabilization.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:53:29,991 ! copying octoprint_octolapse/static/js/octolapse.profiles.trigger.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:53:29,991 ! copying octoprint_octolapse/static/js/octolapse.settings.import.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:53:29,991 ! copying octoprint_octolapse/static/js/octolapse.settings.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:53:29,991 ! copying octoprint_octolapse/static/js/octolapse.settings.main.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:53:29,991 ! copying octoprint_octolapse/static/js/octolapse.status.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:53:29,992 ! copying octoprint_octolapse/static/js/octolapse.status.snapshotplan.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:53:29,992 ! copying octoprint_octolapse/static/js/octolapse.status.snapshotplan_preview.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:53:29,992 ! copying octoprint_octolapse/static/js/showdown.min.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js
2023-05-09 13:53:29,992 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js/webcams
2023-05-09 13:53:29,992 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js/webcams/mjpg_streamer
2023-05-09 13:53:29,993 ! copying octoprint_octolapse/static/js/webcams/mjpg_streamer/raspi_cam_v2.js -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/static/js/webcams/mjpg_streamer
2023-05-09 13:53:29,993 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:53:29,993 ! copying octoprint_octolapse/templates/octolapse_dialog.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:53:29,993 ! copying octoprint_octolapse/templates/octolapse_dialog_rendering_in_process.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:53:29,993 ! copying octoprint_octolapse/templates/octolapse_dialog_rendering_unfinished.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:53:29,994 ! copying octoprint_octolapse/templates/octolapse_dialog_timelapse_files.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:53:29,994 ! copying octoprint_octolapse/templates/octolapse_file_browser.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:53:29,994 ! copying octoprint_octolapse/templates/octolapse_helpers.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:53:29,994 ! copying octoprint_octolapse/templates/octolapse_navbar.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:53:29,994 ! copying octoprint_octolapse/templates/octolapse_profile_dialog_add_edit.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:53:29,995 ! copying octoprint_octolapse/templates/octolapse_profiles.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:53:29,995 ! copying octoprint_octolapse/templates/octolapse_profiles_camera.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:53:29,995 ! copying octoprint_octolapse/templates/octolapse_profiles_camera_webcam.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:53:29,995 ! copying octoprint_octolapse/templates/octolapse_profiles_camera_webcam_mjpg_streamer.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:53:29,995 ! copying octoprint_octolapse/templates/octolapse_profiles_library.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:53:29,996 ! copying octoprint_octolapse/templates/octolapse_profiles_logging.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:53:29,996 ! copying octoprint_octolapse/templates/octolapse_profiles_printer.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:53:29,996 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_automatic.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:53:29,996 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_automatic.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:53:29,997 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_cura.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:53:29,997 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_cura_4.2.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:53:29,997 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_other.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:53:29,997 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_simplify3d.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:53:29,997 ! copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_slic3r_pe.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:53:29,997 ! copying octoprint_octolapse/templates/octolapse_profiles_rendering.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:53:29,998 ! copying octoprint_octolapse/templates/octolapse_profiles_stabilization.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:53:29,998 ! copying octoprint_octolapse/templates/octolapse_profiles_trigger.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:53:29,998 ! copying octoprint_octolapse/templates/octolapse_settings.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:53:29,998 ! copying octoprint_octolapse/templates/octolapse_settings_import.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:53:29,998 ! copying octoprint_octolapse/templates/octolapse_settings_main.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:53:29,999 ! copying octoprint_octolapse/templates/octolapse_snapshot_plan.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:53:29,999 ! copying octoprint_octolapse/templates/octolapse_status_extruder.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:53:29,999 ! copying octoprint_octolapse/templates/octolapse_status_position.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:53:29,999 ! copying octoprint_octolapse/templates/octolapse_status_printer_state.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:53:29,999 ! copying octoprint_octolapse/templates/octolapse_status_snapshot_plan.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:53:30,000 ! copying octoprint_octolapse/templates/octolapse_status_triggers.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:53:30,000 ! copying octoprint_octolapse/templates/octolapse_tab.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:53:30,000 ! copying octoprint_octolapse/templates/octolapse_tab_latest_snapshot.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:53:30,000 ! copying octoprint_octolapse/templates/octolapse_tab_settings_current.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:53:30,001 ! copying octoprint_octolapse/templates/octolapse_tab_settings_current_cameras.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:53:30,001 ! copying octoprint_octolapse/templates/octolapse_tab_snapshot_plan_preview_popup.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:53:30,001 ! copying octoprint_octolapse/templates/octolapse_tab_webcam_settings_popup.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates
2023-05-09 13:53:30,001 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams
2023-05-09 13:53:30,001 ! creating build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams/mjpg_streamer
2023-05-09 13:53:30,002 ! copying octoprint_octolapse/templates/webcams/mjpg_streamer/logitech_c250.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams/mjpg_streamer
2023-05-09 13:53:30,002 ! copying octoprint_octolapse/templates/webcams/mjpg_streamer/logitech_c920.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams/mjpg_streamer
2023-05-09 13:53:30,002 ! copying octoprint_octolapse/templates/webcams/mjpg_streamer/raspi_cam_v2.jinja2 -> build/lib.linux-aarch64-cpython-310/octoprint_octolapse/templates/webcams/mjpg_streamer
2023-05-09 13:53:30,002 ! UPDATING build/lib.linux-aarch64-cpython-310/octoprint_octolapse/_version.py
2023-05-09 13:53:30,003 ! set build/lib.linux-aarch64-cpython-310/octoprint_octolapse/_version.py to 'v0.4.2'
2023-05-09 13:53:30,003 ! running build_ext
2023-05-09 13:53:30,003 ! Compiling Octolapse Parser Extension with <distutils.unixccompiler.UnixCCompiler object at 0x746a9b8ac0>.
2023-05-09 13:53:30,003 ! building 'GcodePositionProcessor' extension
2023-05-09 13:53:30,003 ! creating build/temp.linux-aarch64-cpython-310
2023-05-09 13:53:30,004 ! creating build/temp.linux-aarch64-cpython-310/octoprint_octolapse
2023-05-09 13:53:30,004 ! creating build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data
2023-05-09 13:53:30,004 ! creating build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib
2023-05-09 13:53:30,004 ! creating build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c
2023-05-09 13:53:30,004 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/extruder.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/extruder.o -O3 -std=c++11
2023-05-09 13:53:30,005 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/gcode_comment_processor.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/gcode_comment_processor.o -O3 -std=c++11
2023-05-09 13:53:30,005 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.cpp: In member function 'void gcode_comment_processor::update_feature_from_section(position&) const':
2023-05-09 13:53:30,005 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.cpp:99:16: warning: enumeration value 'section_type_no_section' not handled in switch [-Wswitch]
2023-05-09 13:53:30,005 ! 99 |         switch (current_section_)
2023-05-09 13:53:30,005 ! |                ^
2023-05-09 13:53:30,006 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/gcode_parser.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/gcode_parser.o -O3 -std=c++11
2023-05-09 13:53:30,006 ! octoprint_octolapse/data/lib/c/gcode_parser.cpp: In member function 'bool gcode_parser::try_parse_gcode(const char*, parsed_command&)':
2023-05-09 13:53:30,006 ! octoprint_octolapse/data/lib/c/gcode_parser.cpp:148:47: warning: suggest parentheses around '&&' within '||' [-Wparentheses]
2023-05-09 13:53:30,006 ! 148 |     else if (cur_char > 32 || cur_char == ' ' && has_seen_character)
2023-05-09 13:53:30,006 ! |                               ~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:53:30,007 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/gcode_position.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/gcode_position.o -O3 -std=c++11
2023-05-09 13:53:30,007 ! octoprint_octolapse/data/lib/c/gcode_position.cpp: In member function 'void gcode_position::add_position(position&)':
2023-05-09 13:53:30,007 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:395:12: warning: operation on '((gcode_position*)this)->gcode_position::cur_pos_' may be undefined [-Wsequence-point]
2023-05-09 13:53:30,007 ! 395 |   cur_pos_ = (++cur_pos_) % NUM_POSITIONS;
2023-05-09 13:53:30,007 ! octoprint_octolapse/data/lib/c/gcode_position.cpp: In member function 'void gcode_position::add_position(parsed_command&)':
2023-05-09 13:53:30,008 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:402:12: warning: operation on '((gcode_position*)this)->gcode_position::cur_pos_' may be undefined [-Wsequence-point]
2023-05-09 13:53:30,008 ! 402 |   cur_pos_ = (++cur_pos_) % NUM_POSITIONS;
2023-05-09 13:53:30,008 ! octoprint_octolapse/data/lib/c/gcode_position.cpp: In member function 'void gcode_position::update(parsed_command&, long int, long int, long int)':
2023-05-09 13:53:30,008 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:659:31: warning: comparison of integer expressions of different signedness: 'const unsigned int' and 'int' [-Wsign-compare]
2023-05-09 13:53:30,008 ! 659 |                 if (increment > p_current_pos->height_increment && increment > 1)
2023-05-09 13:53:30,009 ! |                     ~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:53:30,009 ! octoprint_octolapse/data/lib/c/gcode_position.cpp: In member function 'void gcode_position::process_g10(position*, parsed_command&)':
2023-05-09 13:53:30,009 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:952:10: warning: variable 's' set but not used [-Wunused-but-set-variable]
2023-05-09 13:53:30,009 ! 952 |   double s = 0;
2023-05-09 13:53:30,009 ! |          ^
2023-05-09 13:53:30,009 ! octoprint_octolapse/data/lib/c/gcode_position.cpp:953:8: warning: variable 'has_s' set but not used [-Wunused-but-set-variable]
2023-05-09 13:53:30,010 ! 953 |   bool has_s = false;
2023-05-09 13:53:30,010 ! |        ^~~~~
2023-05-09 13:53:30,010 ! In file included from octoprint_octolapse/data/lib/c/gcode_position.h:29,
2023-05-09 13:53:30,010 ! from octoprint_octolapse/data/lib/c/gcode_position.cpp:22:
2023-05-09 13:53:30,010 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h: At global scope:
2023-05-09 13:53:30,011 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:77:20: warning: 'SLICER_PE_SKIRT_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:53:30,011 ! 77 | static const char* SLICER_PE_SKIRT_COMMENTS[] = {"skirt", "move to first skirt point", NULL};
2023-05-09 13:53:30,011 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:53:30,011 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:73:20: warning: 'SLICER_PE_BRIDGE_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:53:30,011 ! 73 | static const char* SLICER_PE_BRIDGE_COMMENTS[] = {
2023-05-09 13:53:30,012 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:53:30,012 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:72:20: warning: 'SLICER_PE_GAP_FILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:53:30,012 ! 72 | static const char* SLICER_PE_GAP_FILL_COMMENTS[] = {"gap fill", "move to first gap fill point", NULL};
2023-05-09 13:53:30,012 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:53:30,012 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:69:20: warning: 'SLICER_PE_SOLID_INFILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:53:30,013 ! 69 | static const char* SLICER_PE_SOLID_INFILL_COMMENTS[] = {
2023-05-09 13:53:30,013 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:53:30,013 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:68:20: warning: 'SLICER_PE_INFILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:53:30,013 ! 68 | static const char* SLICER_PE_INFILL_COMMENTS[] = {"infill", "move to first infill point", NULL};
2023-05-09 13:53:30,013 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:53:30,014 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:67:20: warning: 'SLICER_PE_UNKNOWN_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:53:30,014 ! 67 | static const char* SLICER_PE_UNKNOWN_PERIMETER_COMMENTS[] = {"perimeter", "move to first perimeter point", NULL};
2023-05-09 13:53:30,014 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:53:30,014 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:64:20: warning: 'SLICER_PE_INNER_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:53:30,014 ! 64 | static const char* SLICER_PE_INNER_PERIMETER_COMMENTS[] = {
2023-05-09 13:53:30,014 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:53:30,015 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:61:20: warning: 'SLICER_PE_OUTER_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:53:30,015 ! 61 | static const char* SLICER_PE_OUTER_PERIMETER_COMMENTS[] = {
2023-05-09 13:53:30,015 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:53:30,015 ! gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Os -g -O2 -Os -g -O2 -Os -g -O2 -DTHREAD_STACK_SIZE=0x100000 -fPIC -DIS_PYTHON_EXTENSION=1 -I/usr/include/python3.10 -c octoprint_octolapse/data/lib/c/gcode_position_processor.cpp -o build/temp.linux-aarch64-cpython-310/octoprint_octolapse/data/lib/c/gcode_position_processor.o -O3 -std=c++11
2023-05-09 13:53:30,015 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:915: warning: ignoring '#pragma region location_detection_commands' [-Wunknown-pragmas]
2023-05-09 13:53:30,016 ! 915 | #pragma region location_detection_commands
2023-05-09 13:53:30,016 ! |
2023-05-09 13:53:30,016 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:955: warning: ignoring '#pragma endregion Parse' [-Wunknown-pragmas]
2023-05-09 13:53:30,016 ! 955 | #pragma endregion Parse the list of location detection commands
2023-05-09 13:53:30,016 ! |
2023-05-09 13:53:30,017 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1122: warning: ignoring '#pragma region Extract' [-Wunknown-pragmas]
2023-05-09 13:53:30,017 ! 1122 | #pragma region Extract extruder objects
2023-05-09 13:53:30,017 ! |
2023-05-09 13:53:30,017 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1219: warning: ignoring '#pragma endregion Parse' [-Wunknown-pragmas]
2023-05-09 13:53:30,017 ! 1219 | #pragma endregion Parse extruder objects
2023-05-09 13:53:30,018 ! |
2023-05-09 13:53:30,018 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1221: warning: ignoring '#pragma region Extract' [-Wunknown-pragmas]
2023-05-09 13:53:30,018 ! 1221 | #pragma region Extract firmware extruder offsets from the printer settings
2023-05-09 13:53:30,018 ! |
2023-05-09 13:53:30,018 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1334: warning: ignoring '#pragma endregion Extract' [-Wunknown-pragmas]
2023-05-09 13:53:30,019 ! 1334 | #pragma endregion Extract firmware extruder offsets from the printer settings
2023-05-09 13:53:30,019 ! |
2023-05-09 13:53:30,019 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp: In function 'int main(int, char**)':
2023-05-09 13:53:30,019 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:56:27: warning: 'void PyEval_InitThreads()' is deprecated [-Wdeprecated-declarations]
2023-05-09 13:53:30,019 ! 56 |         PyEval_InitThreads();
2023-05-09 13:53:30,019 ! |         ~~~~~~~~~~~~~~~~~~^~
2023-05-09 13:53:30,020 ! In file included from /usr/include/python3.10/Python.h:130,
2023-05-09 13:53:30,020 ! from octoprint_octolapse/data/lib/c/gcode_position_processor.h:30,
2023-05-09 13:53:30,020 ! from octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:23:
2023-05-09 13:53:30,021 ! /usr/include/python3.10/ceval.h:122:37: note: declared here
2023-05-09 13:53:30,021 ! 122 | Py_DEPRECATED(3.9) PyAPI_FUNC(void) PyEval_InitThreads(void);
2023-05-09 13:53:30,021 ! |                                     ^~~~~~~~~~~~~~~~~~
2023-05-09 13:53:30,021 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp: In function 'PyObject* Initialize(PyObject*, PyObject*)':
2023-05-09 13:53:30,021 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:371:19: warning: unused variable 'p_gcode_position' [-Wunused-variable]
2023-05-09 13:53:30,022 ! 371 |   gcode_position* p_gcode_position = NULL;
2023-05-09 13:53:30,022 ! |                   ^~~~~~~~~~~~~~~~
2023-05-09 13:53:30,022 ! In file included from /usr/include/c++/12.2.1/bits/cxxabi_init_exception.h:38,
2023-05-09 13:53:30,022 ! from /usr/include/c++/12.2.1/bits/exception_ptr.h:38,
2023-05-09 13:53:30,022 ! from /usr/include/c++/12.2.1/exception:168,
2023-05-09 13:53:30,023 ! from /usr/include/c++/12.2.1/stdexcept:38,
2023-05-09 13:53:30,023 ! from /usr/include/c++/12.2.1/system_error:41,
2023-05-09 13:53:30,023 ! from /usr/include/c++/12.2.1/bits/ios_base.h:46,
2023-05-09 13:53:30,023 ! from /usr/include/c++/12.2.1/iomanip:40,
2023-05-09 13:53:30,023 ! from octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:24:
2023-05-09 13:53:30,024 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp: In function 'bool ParseStabilizationArgs(PyObject*, stabilization_args*, PyObject**, PyObject**)':
2023-05-09 13:53:30,024 ! octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1406:12: error: converting to 'bool' from 'std::nullptr_t' requires direct-initialization [-fpermissive]
2023-05-09 13:53:30,024 ! 1406 |     return NULL;
2023-05-09 13:53:30,024 ! |            ^~~~
2023-05-09 13:53:30,024 ! In file included from octoprint_octolapse/data/lib/c/gcode_position_processor.h:37:
2023-05-09 13:53:30,025 ! octoprint_octolapse/data/lib/c/stabilization_smart_gcode.h: At global scope:
2023-05-09 13:53:30,025 ! octoprint_octolapse/data/lib/c/stabilization_smart_gcode.h:5:20: warning: 'SMART_GCODE_STABILIZATION' defined but not used [-Wunused-variable]
2023-05-09 13:53:30,025 ! 5 | static const char* SMART_GCODE_STABILIZATION = "smart_gcode";
2023-05-09 13:53:30,025 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:53:30,025 ! In file included from octoprint_octolapse/data/lib/c/gcode_position_processor.h:36:
2023-05-09 13:53:30,026 ! octoprint_octolapse/data/lib/c/stabilization_smart_layer.h:11:20: warning: 'SMART_LAYER_STABILIZATION' defined but not used [-Wunused-variable]
2023-05-09 13:53:30,026 ! 11 | static const char* SMART_LAYER_STABILIZATION = "smart_layer";
2023-05-09 13:53:30,026 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:53:30,026 ! In file included from octoprint_octolapse/data/lib/c/gcode_position_processor.h:35:
2023-05-09 13:53:30,026 ! octoprint_octolapse/data/lib/c/stabilization.h:44:20: warning: 'send_parsed_command_never' defined but not used [-Wunused-variable]
2023-05-09 13:53:30,027 ! 44 | static const char* send_parsed_command_never = "never";
2023-05-09 13:53:30,027 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:53:30,027 ! octoprint_octolapse/data/lib/c/stabilization.h:43:20: warning: 'send_parsed_command_last' defined but not used [-Wunused-variable]
2023-05-09 13:53:30,027 ! 43 | static const char* send_parsed_command_last = "last";
2023-05-09 13:53:30,027 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:53:30,028 ! octoprint_octolapse/data/lib/c/stabilization.h:42:20: warning: 'send_parsed_command_first' defined but not used [-Wunused-variable]
2023-05-09 13:53:30,028 ! 42 | static const char* send_parsed_command_first = "first";
2023-05-09 13:53:30,028 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:53:30,028 ! octoprint_octolapse/data/lib/c/stabilization.h:41:20: warning: 'snapshot_action' defined but not used [-Wunused-variable]
2023-05-09 13:53:30,028 ! 41 | static const char* snapshot_action = "snapshot";
2023-05-09 13:53:30,029 ! |                    ^~~~~~~~~~~~~~~
2023-05-09 13:53:30,029 ! octoprint_octolapse/data/lib/c/stabilization.h:40:20: warning: 'travel_action' defined but not used [-Wunused-variable]
2023-05-09 13:53:30,029 ! 40 | static const char* travel_action = "travel";
2023-05-09 13:53:30,029 ! |                    ^~~~~~~~~~~~~
2023-05-09 13:53:30,029 ! In file included from octoprint_octolapse/data/lib/c/gcode_position.h:29,
2023-05-09 13:53:30,030 ! from octoprint_octolapse/data/lib/c/gcode_position_processor.h:33:
2023-05-09 13:53:30,030 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:77:20: warning: 'SLICER_PE_SKIRT_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:53:30,030 ! 77 | static const char* SLICER_PE_SKIRT_COMMENTS[] = {"skirt", "move to first skirt point", NULL};
2023-05-09 13:53:30,030 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:53:30,030 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:73:20: warning: 'SLICER_PE_BRIDGE_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:53:30,031 ! 73 | static const char* SLICER_PE_BRIDGE_COMMENTS[] = {
2023-05-09 13:53:30,031 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:53:30,031 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:72:20: warning: 'SLICER_PE_GAP_FILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:53:30,031 ! 72 | static const char* SLICER_PE_GAP_FILL_COMMENTS[] = {"gap fill", "move to first gap fill point", NULL};
2023-05-09 13:53:30,031 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:53:30,031 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:69:20: warning: 'SLICER_PE_SOLID_INFILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:53:30,032 ! 69 | static const char* SLICER_PE_SOLID_INFILL_COMMENTS[] = {
2023-05-09 13:53:30,032 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:53:30,032 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:68:20: warning: 'SLICER_PE_INFILL_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:53:30,032 ! 68 | static const char* SLICER_PE_INFILL_COMMENTS[] = {"infill", "move to first infill point", NULL};
2023-05-09 13:53:30,032 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:53:30,033 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:67:20: warning: 'SLICER_PE_UNKNOWN_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:53:30,033 ! 67 | static const char* SLICER_PE_UNKNOWN_PERIMETER_COMMENTS[] = {"perimeter", "move to first perimeter point", NULL};
2023-05-09 13:53:30,033 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:53:30,033 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:64:20: warning: 'SLICER_PE_INNER_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:53:30,033 ! 64 | static const char* SLICER_PE_INNER_PERIMETER_COMMENTS[] = {
2023-05-09 13:53:30,034 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:53:30,034 ! octoprint_octolapse/data/lib/c/gcode_comment_processor.h:61:20: warning: 'SLICER_PE_OUTER_PERIMETER_COMMENTS' defined but not used [-Wunused-variable]
2023-05-09 13:53:30,034 ! 61 | static const char* SLICER_PE_OUTER_PERIMETER_COMMENTS[] = {
2023-05-09 13:53:30,034 ! |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2023-05-09 13:53:30,034 ! error: command '/usr/bin/gcc' failed with exit code 1
2023-05-09 13:53:30,035 ! [end of output]
2023-05-09 13:53:30,035 ! 
2023-05-09 13:53:30,035 ! note: This error originates from a subprocess, and is likely not a problem with pip.
2023-05-09 13:53:30,035 ! error: legacy-install-failure
2023-05-09 13:53:30,036 ! 
2023-05-09 13:53:30,036 ! × Encountered error while trying to install package.
2023-05-09 13:53:30,036 ! ╰─> Octolapse
2023-05-09 13:53:30,036 ! 
2023-05-09 13:53:30,036 ! note: This is an issue with the package mentioned above, not pip.
2023-05-09 13:53:30,037 ! hint: See above for output from the failure.