2022-01-18 15:22:28,730 - Changing monitoring state from "Offline" to "Detecting serial connection"
2022-01-18 15:22:28,757 - Performing autodetection with 1 port/baudrate candidates: /dev/ttyUSB0@115200
2022-01-18 15:22:28,757 - Trying port /dev/ttyUSB0, baudrate 115200
2022-01-18 15:22:28,758 - Connecting to port /dev/ttyUSB0, baudrate 115200
2022-01-18 15:22:28,783 - Handshake attempt #1 with timeout 2.0s
2022-01-18 15:22:28,786 - Connected to: Serial<id=0x6cb6ce30, open=True>(port='/dev/ttyUSB0', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=2.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
2022-01-18 15:22:28,788 - Send: N0 M110 N0*125
2022-01-18 15:22:29,689 - Recv: start
2022-01-18 15:22:29,692 - Changing monitoring state from "Detecting serial connection" to "Operational"
2022-01-18 15:22:29,721 - Send: N0 M110 N0*125
2022-01-18 15:22:29,722 - Recv: echo: External Reset
2022-01-18 15:22:29,724 - Recv: Marlin 1.1.9_B5
2022-01-18 15:22:29,727 - Recv: 
2022-01-18 15:22:29,738 - Recv: echo: Last Updated: 2018-09-12 | Author: TinyMachines3D
2022-01-18 15:22:29,740 - Recv: echo:Compiled: Mar 14 2019
2022-01-18 15:22:29,741 - Recv: echo: Free Memory: 1729  PlannerBufferBytes: 1232
2022-01-18 15:22:29,778 - Recv: echo:V55 stored settings retrieved (683 bytes; crc 63878)
2022-01-18 15:22:29,780 - Recv: echo:  G21    ; (mm)
2022-01-18 15:22:29,782 - Recv: 
2022-01-18 15:22:29,788 - Recv: echo:Filament settings: Disabled
2022-01-18 15:22:29,790 - Recv: echo:  M200 D1.75
2022-01-18 15:22:29,792 - Recv: echo:  M200 D0
2022-01-18 15:22:29,793 - Recv: echo:Steps per unit:
2022-01-18 15:22:29,794 - Recv: echo:  M92 X80.00 Y80.00 Z400.00 E140.70
2022-01-18 15:22:29,796 - Recv: echo:Maximum feedrates (units/s):
2022-01-18 15:22:29,797 - Recv: echo:  M203 X500.00 Y500.00 Z10.00 E25.00
2022-01-18 15:22:29,798 - Recv: echo:Maximum Acceleration (units/s2):
2022-01-18 15:22:29,799 - Recv: echo:  M201 X750 Y750 Z100 E25
2022-01-18 15:22:29,801 - Recv: echo:Acceleration (units/s2): P<print_accel> R<retract_accel> T<travel_accel>
2022-01-18 15:22:29,802 - Recv: echo:  M204 P300.00 R1000.00 T300.00
2022-01-18 15:22:29,826 - Recv: echo:Advanced: Q<min_segment_time_us> S<min_feedrate> T<min_travel_feedrate> X<max_x_jerk> Y<max_y_jerk> Z<max_z_jerk> E<max_e_jerk>
2022-01-18 15:22:29,835 - Recv: echo:  M205 Q20000 S0.00 T0.00 X8.00 Y8.00 Z0.40 E5.00
2022-01-18 15:22:29,842 - Recv: echo:Home offset:
2022-01-18 15:22:29,847 - Recv: echo:  M206 X0.00 Y0.00 Z0.00
2022-01-18 15:22:29,849 - Recv: echo:Auto Bed Leveling:
2022-01-18 15:22:29,851 - Recv: echo:  M420 S0 Z0.00
2022-01-18 15:22:29,852 - Recv: echo:  G29 W I0 J0 Z-0.09700
2022-01-18 15:22:29,854 - Recv: echo:  G29 W I1 J0 Z-0.15700
2022-01-18 15:22:29,856 - Recv: echo:  G29 W I2 J0 Z-0.17550
2022-01-18 15:22:29,858 - Recv: echo:  G29 W I3 J0 Z-0.25000
2022-01-18 15:22:29,859 - Recv: echo:  G29 W I0 J1 Z-0.39000
2022-01-18 15:22:29,861 - Recv: echo:  G29 W I1 J1 Z-0.25450
2022-01-18 15:22:29,863 - Recv: echo:  G29 W I2 J1 Z-0.20300
2022-01-18 15:22:29,865 - Recv: echo:  G29 W I3 J1 Z-0.24150
2022-01-18 15:22:29,866 - Recv: echo:  G29 W I0 J2 Z-0.51500
2022-01-18 15:22:29,868 - Recv: echo:  G29 W I1 J2 Z-0.35850
2022-01-18 15:22:29,870 - Recv: echo:  G29 W I2 J2 Z-0.30250
2022-01-18 15:22:29,872 - Recv: echo:  G29 W I3 J2 Z-0.35450
2022-01-18 15:22:29,874 - Recv: echo:  G29 W I0 J3 Z-0.71450
2022-01-18 15:22:29,876 - Recv: echo:  G29 W I1 J3 Z-0.56000
2022-01-18 15:22:29,878 - Recv: echo:  G29 W I2 J3 Z-0.49800
2022-01-18 15:22:29,879 - Recv: echo:  G29 W I3 J3 Z-0.60350
2022-01-18 15:22:29,881 - Recv: echo:PID settings:
2022-01-18 15:22:29,883 - Recv: echo:  M301 P26.67 I2.26 D78.65
2022-01-18 15:22:29,885 - Recv: echo:  M304 P690.34 I111.47 D1068.83
2022-01-18 15:22:29,886 - Recv: echo:Retract: S<length> F<units/m> Z<lift>
2022-01-18 15:22:29,888 - Recv: echo:  M207 S3.00 W13.00 F2700.00 Z0.00
2022-01-18 15:22:29,890 - Recv: echo:Recover: S<length> F<units/m>
2022-01-18 15:22:29,892 - Recv: echo:  M208 S0.00 W0.00 F480.00
2022-01-18 15:22:29,894 - Recv: echo:Auto-Retract: S=0 to disable, 1 to interpret E-only moves as retract/recover
2022-01-18 15:22:29,896 - Recv: echo:  M209 S0
2022-01-18 15:22:29,898 - Recv: echo:Z-Probe Offset (mm):
2022-01-18 15:22:29,899 - Recv: echo:  M851 Z-0.53
2022-01-18 15:22:29,901 - Recv: echo:Filament load/unload lengths:
2022-01-18 15:22:29,903 - Recv: echo:  M603 L430.00 U430.00
2022-01-18 15:22:30,145 - Recv: echo:enqueueing "M420 S1"
2022-01-18 15:22:30,161 - Recv: echo:SD card ok
2022-01-18 15:22:30,165 - Recv: ***Initing card is OK***
2022-01-18 15:22:30,176 - Recv: echo:SD card ok
2022-01-18 15:22:30,401 - Recv: 
2022-01-18 15:22:30,404 - Recv:  init zprobe_zoffset = -0.53===Initing RTS has finished===
2022-01-18 15:22:30,406 - Recv: echo:Bed Leveling On
2022-01-18 15:22:30,408 - Recv: echo:Fade Height Off
2022-01-18 15:22:30,410 - Recv: X:0.00 Y:0.00 Z:0.10 E:0.00 Count X:0 Y:0 Z:0
2022-01-18 15:22:30,433 - Recv: ok N0 P15 B3
2022-01-18 15:22:30,436 - Send: N1 M115*39
2022-01-18 15:22:30,492 - Recv: FIRMWARE_NAME:Marlin 1.1.9_B5 TM3D SSMDNB SOURCE_CODE_URL:https://github.com/InsanityAutomation/Marlin/ PROTOCOL_VERSION:1.0 MACHINE_TYPE:TM3D 10S Pro EXTRUDER_COUNT:1 UUID:cede2a2f-41a2-4748-9b12-c55c62f367ff
2022-01-18 15:22:30,496 - Recv: Cap:SERIAL_XON_XOFF:0
2022-01-18 15:22:30,498 - Recv: Cap:EEPROM:1
2022-01-18 15:22:30,503 - Recv: Cap:VOLUMETRIC:1
2022-01-18 15:22:30,505 - Recv: Cap:AUTOREPORT_TEMP:1
2022-01-18 15:22:30,515 - Recv: Cap:PROGRESS:0
2022-01-18 15:22:30,517 - Recv: Cap:PRINT_JOB:1
2022-01-18 15:22:30,519 - Recv: Cap:AUTOLEVEL:1
2022-01-18 15:22:30,521 - Recv: Cap:Z_PROBE:1
2022-01-18 15:22:30,523 - Recv: Cap:LEVELING_DATA:1
2022-01-18 15:22:30,525 - Recv: Cap:BUILD_PERCENT:1
2022-01-18 15:22:30,526 - Recv: Cap:SOFTWARE_POWER:0
2022-01-18 15:22:30,528 - Recv: Cap:TOGGLE_LIGHTS:0
2022-01-18 15:22:30,530 - Recv: Cap:CASE_LIGHT_BRIGHTNESS:0
2022-01-18 15:22:30,531 - Recv: Cap:EMERGENCY_PARSER:1
2022-01-18 15:22:30,534 - Recv: Cap:AUTOREPORT_SD_STATUS:1
2022-01-18 15:22:30,536 - Recv: Cap:THERMAL_PROTECTION:1
2022-01-18 15:22:30,540 - Recv: ok N1 P15 B3
2022-01-18 15:22:30,543 - Send: M21
2022-01-18 15:22:30,572 - Recv: echo:SD card ok
2022-01-18 15:22:30,573 - Recv: ok P15 B3
2022-01-18 15:22:30,574 - Send: M20
2022-01-18 15:22:30,603 - Recv: Begin file list
2022-01-18 15:22:30,635 - Recv: /ARCHIVE/PAULSK~1.GCO 5574304
2022-01-18 15:22:30,636 - Recv: /ARCHIVE/SKI_9M~1.GCO 1758071
2022-01-18 15:22:30,638 - Recv: /ARCHIVE/MINI_C~1.GCO 702426
2022-01-18 15:22:30,639 - Recv: End file list
2022-01-18 15:22:30,640 - Recv: ok P15 B3
2022-01-18 15:22:30,642 - Send: M155 S2
2022-01-18 15:22:30,672 - Recv: ok P15 B3
2022-01-18 15:22:30,675 - Send: M27 S1
2022-01-18 15:22:30,698 - Recv: ok P15 B3
2022-01-18 15:22:31,705 - Recv: wait
2022-01-18 15:22:31,706 - Recv: Not SD printing
2022-01-18 15:22:32,678 - Recv:  T:23.24 /0.00 B:22.75 /0.00 @:0 B@:0
2022-01-18 15:22:32,719 - Recv: wait
2022-01-18 15:22:32,720 - Recv: Not SD printing
2022-01-18 15:22:33,700 - Recv: wait
2022-01-18 15:22:33,717 - Recv: Not SD printing
2022-01-18 15:22:34,691 - Recv:  T:23.09 /0.00 B:22.78 /0.00 @:0 B@:0
2022-01-18 15:22:34,723 - Recv: wait
2022-01-18 15:22:34,724 - Recv: Not SD printing
2022-01-18 15:22:35,713 - Recv: wait
2022-01-18 15:22:35,715 - Recv: Not SD printing
2022-01-18 15:22:36,592 - Recv:   startprogress
2022-01-18 15:22:36,687 - Recv:  T:23.09 /0.00 B:22.75 /0.00 @:0 B@:0
2022-01-18 15:22:36,720 - Recv: Not SD printing
2022-01-18 15:22:36,721 - Recv: wait
2022-01-18 15:22:37,710 - Recv: Not SD printing
2022-01-18 15:22:37,725 - Recv: wait
2022-01-18 15:22:38,684 - Recv:  T:23.16 /0.00 B:22.72 /0.00 @:0 B@:0
2022-01-18 15:22:38,715 - Recv: Not SD printing
2022-01-18 15:22:38,717 - Recv: wait