Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 1280x720 -f 30 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video0 <13>Dec 29 09:36:57 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 1280x720 -f 30 -d /dev/video0 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 1280 x 720 i: Frames Per Second.: 30 i: Format............: JPEG i: TV-Norm...........: DEFAULT UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www-octopi/ o: HTTP TCP port........: 8080 o: HTTP Listen Address..: 127.0.0.1 o: username:password....: disabled o: commands.............: disabled Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 1280x720 -f 30 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video0 <13>Dec 29 09:57:26 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 1280x720 -f 30 -d /dev/video0 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 1280 x 720 i: Frames Per Second.: 30 i: Format............: JPEG i: TV-Norm...........: DEFAULT UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www-octopi/ o: HTTP TCP port........: 8080 o: HTTP Listen Address..: 127.0.0.1 o: username:password....: disabled o: commands.............: disabled Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 1280x720 -f 30 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video0 <13>Dec 29 10:01:54 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 1280x720 -f 30 -d /dev/video0 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 1280 x 720 i: Frames Per Second.: 30 i: Format............: JPEG i: TV-Norm...........: DEFAULT UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www-octopi/ o: HTTP TCP port........: 8080 o: HTTP Listen Address..: 127.0.0.1 o: username:password....: disabled o: commands.............: disabled Done bring up all configured video device Goodbye... Unable to dequeue buffer: No such device i: Error grabbing frames i: cleaning up resources allocated by input thread Unable to stop capture: No such device Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 1280x720 -f 30 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video0 <13>Dec 29 10:17:05 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 1280x720 -f 30 -d /dev/video0 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 1280 x 720 i: Frames Per Second.: 30 i: Format............: JPEG i: TV-Norm...........: DEFAULT UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www-octopi/ o: HTTP TCP port........: 8080 o: HTTP Listen Address..: 127.0.0.1 o: username:password....: disabled o: commands.............: disabled Done bring up all configured video device Goodbye... Unable to dequeue buffer: No such device i: Error grabbing frames i: cleaning up resources allocated by input thread Unable to stop capture: No such device Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 1280x720 -f 30 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Dec 29 10:26:37 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 1280x720 -f 30 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 1280 x 720 i: Frames Per Second.: 30 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 1280x720 -f 30 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Dec 29 10:26:40 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 1280x720 -f 30 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 1280 x 720 i: Frames Per Second.: 30 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 1280x720 -f 30 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Dec 29 10:26:42 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 1280x720 -f 30 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 1280 x 720 i: Frames Per Second.: 30 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 1280x720 -f 30 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Dec 29 10:26:44 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 1280x720 -f 30 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 1280 x 720 i: Frames Per Second.: 30 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 1280x720 -f 30 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Dec 29 10:26:47 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 1280x720 -f 30 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 1280 x 720 i: Frames Per Second.: 30 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 1280x720 -f 30 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Dec 29 10:26:49 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 1280x720 -f 30 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 1280 x 720 i: Frames Per Second.: 30 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 1280x720 -f 30 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Dec 29 10:26:51 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 1280x720 -f 30 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 1280 x 720 i: Frames Per Second.: 30 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 1280x720 -f 30 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Dec 29 10:26:54 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 1280x720 -f 30 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 1280 x 720 i: Frames Per Second.: 30 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 1280x720 -f 30 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Dec 29 10:26:56 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 1280x720 -f 30 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 1280 x 720 i: Frames Per Second.: 30 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 1280x720 -f 30 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Dec 29 10:26:58 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 1280x720 -f 30 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 1280 x 720 i: Frames Per Second.: 30 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 1280x720 -f 30 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Dec 29 10:27:01 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 1280x720 -f 30 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 1280 x 720 i: Frames Per Second.: 30 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 1280x720 -f 30 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Dec 29 10:27:03 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 1280x720 -f 30 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 1280 x 720 i: Frames Per Second.: 30 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 1280x720 -f 30 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Dec 29 10:27:19 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 1280x720 -f 30 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 1280 x 720 i: Frames Per Second.: 30 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 1280x720 -f 30 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Dec 29 10:27:22 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 1280x720 -f 30 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 1280 x 720 i: Frames Per Second.: 30 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 1280x720 -f 30 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Dec 29 10:27:24 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 1280x720 -f 30 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 1280 x 720 i: Frames Per Second.: 30 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 1280x720 -f 30 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Dec 29 10:27:26 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 1280x720 -f 30 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 1280 x 720 i: Frames Per Second.: 30 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 1280x720 -f 30 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Dec 29 10:27:28 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 1280x720 -f 30 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 1280 x 720 i: Frames Per Second.: 30 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 1280x720 -f 30 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Dec 29 10:27:31 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 1280x720 -f 30 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 1280 x 720 i: Frames Per Second.: 30 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 1280x720 -f 30 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Dec 29 10:27:33 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 1280x720 -f 30 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 1280 x 720 i: Frames Per Second.: 30 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 1280x720 -f 30 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Dec 29 10:27:35 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 1280x720 -f 30 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 1280 x 720 i: Frames Per Second.: 30 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 1280x720 -f 30 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Dec 29 10:27:37 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 1280x720 -f 30 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 1280 x 720 i: Frames Per Second.: 30 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 1280x720 -f 30 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Dec 29 10:27:40 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 1280x720 -f 30 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 1280 x 720 i: Frames Per Second.: 30 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 1280x720 -f 30 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Dec 29 10:27:42 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 1280x720 -f 30 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 1280 x 720 i: Frames Per Second.: 30 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 1280x720 -f 30 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Dec 29 10:27:44 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 1280x720 -f 30 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 1280 x 720 i: Frames Per Second.: 30 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 1280x720 -f 30 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Dec 29 10:27:46 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 1280x720 -f 30 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 1280 x 720 i: Frames Per Second.: 30 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 1280x720 -f 30 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Dec 29 10:27:49 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 1280x720 -f 30 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 1280 x 720 i: Frames Per Second.: 30 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 1280x720 -f 30 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Dec 29 10:27:51 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 1280x720 -f 30 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 1280 x 720 i: Frames Per Second.: 30 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 1280x720 -f 30 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Dec 29 10:27:53 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 1280x720 -f 30 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 1280 x 720 i: Frames Per Second.: 30 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 1280x720 -f 30 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Dec 29 10:27:55 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 1280x720 -f 30 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 1280 x 720 i: Frames Per Second.: 30 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 1280x720 -f 30 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Dec 29 10:27:58 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 1280x720 -f 30 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 1280 x 720 i: Frames Per Second.: 30 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 1280x720 -f 30 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Dec 29 10:28:00 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 1280x720 -f 30 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 1280 x 720 i: Frames Per Second.: 30 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 1280x720 -f 30 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video0 <13>Dec 29 10:28:02 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 1280x720 -f 30 -d /dev/video0 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 1280 x 720 i: Frames Per Second.: 30 i: Format............: JPEG i: TV-Norm...........: DEFAULT UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www-octopi/ o: HTTP TCP port........: 8080 o: HTTP Listen Address..: 127.0.0.1 o: username:password....: disabled o: commands.............: disabled Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 1280x720 -f 30 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video0 <13>Dec 29 10:31:04 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 1280x720 -f 30 -d /dev/video0 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 1280 x 720 i: Frames Per Second.: 30 i: Format............: JPEG i: TV-Norm...........: DEFAULT UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www-octopi/ o: HTTP TCP port........: 8080 o: HTTP Listen Address..: 127.0.0.1 o: username:password....: disabled o: commands.............: disabled Done bring up all configured video device Goodbye... Unable to dequeue buffer: No such device i: Error grabbing frames i: cleaning up resources allocated by input thread Unable to stop capture: No such device Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 1280x720 -f 30 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video0 <13>Dec 29 10:41:12 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 1280x720 -f 30 -d /dev/video0 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 1280 x 720 i: Frames Per Second.: 30 i: Format............: JPEG i: TV-Norm...........: DEFAULT UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www-octopi/ o: HTTP TCP port........: 8080 o: HTTP Listen Address..: 127.0.0.1 o: username:password....: disabled o: commands.............: disabled Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 1280x720 -f 30 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video0 <13>Dec 29 10:47:07 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 1280x720 -f 30 -d /dev/video0 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 1280 x 720 i: Frames Per Second.: 30 i: Format............: JPEG i: TV-Norm...........: DEFAULT UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www-octopi/ o: HTTP TCP port........: 8080 o: HTTP Listen Address..: 127.0.0.1 o: username:password....: disabled o: commands.............: disabled Done bring up all configured video device Goodbye... Unable to dequeue buffer: No such device i: Error grabbing frames i: cleaning up resources allocated by input thread Unable to stop capture: No such device Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 1280x720 -f 30 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Dec 29 21:17:05 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 1280x720 -f 30 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 1280 x 720 i: Frames Per Second.: 30 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 1280x720 -f 30 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Dec 29 21:17:07 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 1280x720 -f 30 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 1280 x 720 i: Frames Per Second.: 30 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 1280x720 -f 30 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Dec 29 21:17:10 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 1280x720 -f 30 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 1280 x 720 i: Frames Per Second.: 30 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 1280x720 -f 30 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Dec 29 21:17:12 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 1280x720 -f 30 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 1280 x 720 i: Frames Per Second.: 30 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 1280x720 -f 30 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video10 /root/bin/webcamd: line 184: printf: 0x: invalid hex number /root/bin/webcamd: line 184: printf: 0x: invalid hex number <13>Dec 29 21:17:14 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 1280x720 -f 30 -d /dev/video10 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video10 i: Desired Resolution: 1280 x 720 i: Frames Per Second.: 30 i: Format............: JPEG i: TV-Norm...........: DEFAULT Error opening device /dev/video10: video capture not supported. Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: auto usb options: -r 1280x720 -f 30 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video18 config file='/boot/octopi.txt':USB device was not set in options, start MJPG-streamer with the first found video device: /dev/video0 <13>Dec 29 21:17:16 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 1280x720 -f 30 -d /dev/video0 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 1280 x 720 i: Frames Per Second.: 30 i: Format............: JPEG i: TV-Norm...........: DEFAULT UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www-octopi/ o: HTTP TCP port........: 8080 o: HTTP Listen Address..: 127.0.0.1 o: username:password....: disabled o: commands.............: disabled Done bring up all configured video device Goodbye... Unable to dequeue buffer: No such device i: Error grabbing frames i: cleaning up resources allocated by input thread Unable to stop capture: No such device