(line 2) Configuration error: Ignoring configuration value 'None'
(line 3) Configuration error: Ignoring configuration value 'None'
(line 4) Configuration error: Ignoring configuration value 'None'
(line 5) Configuration error: Ignoring configuration value 'None'
(line 7) Configuration error: Ignoring configuration value 'None'
(line 8) Configuration error: Ignoring configuration value 'None'
(line 9) Configuration error: Ignoring configuration value 'None'
(line 10) Configuration error: Ignoring configuration value 'None'
(line 12) Configuration error: Ignoring configuration value 'None'
(line 13) Configuration error: Ignoring configuration value 'None'
(line 14) Configuration error: Ignoring configuration value 'None'
(line 15) Configuration error: Ignoring configuration value 'None'
(line 16) Configuration error: Ignoring configuration value 'None'
(line 18) Configuration error: [machine] section contains unrecognised property actual_filament_diameter = 0
(line 19) Configuration error: Ignoring configuration value 'None'
(line 20) Configuration error: Ignoring configuration value 'None'
(line 21) Configuration error: Ignoring configuration value 'None'
(line 23) Configuration error: Ignoring configuration value 'None'
(line 31) Configuration error: Ignoring configuration value 'None'
(line 32) Configuration error: Ignoring configuration value 'None'
(line 34) Configuration error: Ignoring configuration value 'None'
(line 35) Configuration error: Ignoring configuration value 'None'
(line 36) Configuration error: Ignoring configuration value 'None'
(line 37) Configuration error: Ignoring configuration value 'None'
(line 38) Configuration error: Ignoring configuration value 'None'
(line 40) Configuration error: Ignoring configuration value 'None'
(line 41) Configuration error: Ignoring configuration value 'None'
(line 42) Configuration error: Ignoring configuration value 'None'
(line 43) Configuration error: Ignoring configuration value 'None'
(line 45) Configuration error: Ignoring configuration value 'None'
(line 46) Configuration error: Ignoring configuration value 'None'
(line 47) Configuration error: Ignoring configuration value 'None'
(line 48) Configuration error: Ignoring configuration value 'None'
(line 50) Configuration error: Ignoring configuration value 'None'
(line 51) Configuration error: Ignoring configuration value 'None'
(line 52) Configuration error: Ignoring configuration value 'None'
(line 53) Configuration error: Ignoring configuration value 'None'
(line 2) Configuration syntax error in /home/pi/.octoprint/data/GPX/gpx.ini: unrecognized parameters
Opening port: /dev/ttyACM0.
gpx connected to /dev/ttyACM0
(line 2) Configuration error: Ignoring configuration value 'None'
(line 3) Configuration error: Ignoring configuration value 'None'
(line 4) Configuration error: Ignoring configuration value 'None'
(line 5) Configuration error: Ignoring configuration value 'None'
(line 7) Configuration error: Ignoring configuration value 'None'
(line 8) Configuration error: Ignoring configuration value 'None'
(line 9) Configuration error: Ignoring configuration value 'None'
(line 10) Configuration error: Ignoring configuration value 'None'
(line 12) Configuration error: Ignoring configuration value 'None'
(line 13) Configuration error: Ignoring configuration value 'None'
(line 14) Configuration error: Ignoring configuration value 'None'
(line 15) Configuration error: Ignoring configuration value 'None'
(line 16) Configuration error: Ignoring configuration value 'None'
(line 18) Configuration error: [machine] section contains unrecognised property actual_filament_diameter = 0
(line 19) Configuration error: Ignoring configuration value 'None'
(line 20) Configuration error: Ignoring configuration value 'None'
(line 21) Configuration error: Ignoring configuration value 'None'
(line 23) Configuration error: Ignoring configuration value 'None'
(line 31) Configuration error: Ignoring configuration value 'None'
(line 32) Configuration error: Ignoring configuration value 'None'
(line 34) Configuration error: Ignoring configuration value 'None'
(line 35) Configuration error: Ignoring configuration value 'None'
(line 36) Configuration error: Ignoring configuration value 'None'
(line 37) Configuration error: Ignoring configuration value 'None'
(line 38) Configuration error: Ignoring configuration value 'None'
(line 40) Configuration error: Ignoring configuration value 'None'
(line 41) Configuration error: Ignoring configuration value 'None'
(line 42) Configuration error: Ignoring configuration value 'None'
(line 43) Configuration error: Ignoring configuration value 'None'
(line 45) Configuration error: Ignoring configuration value 'None'
(line 46) Configuration error: Ignoring configuration value 'None'
(line 47) Configuration error: Ignoring configuration value 'None'
(line 48) Configuration error: Ignoring configuration value 'None'
(line 50) Configuration error: Ignoring configuration value 'None'
(line 51) Configuration error: Ignoring configuration value 'None'
(line 52) Configuration error: Ignoring configuration value 'None'
(line 53) Configuration error: Ignoring configuration value 'None'
(line 2) Configuration syntax error in /home/pi/.octoprint/data/GPX/gpx.ini: unrecognized parameters
Opening port: /dev/ttyACM0.
gpx connected to /dev/ttyACM0
(line 2) Configuration error: Ignoring configuration value 'None'
(line 3) Configuration error: Ignoring configuration value 'None'
(line 4) Configuration error: Ignoring configuration value 'None'
(line 5) Configuration error: Ignoring configuration value 'None'
(line 7) Configuration error: Ignoring configuration value 'None'
(line 8) Configuration error: Ignoring configuration value 'None'
(line 9) Configuration error: Ignoring configuration value 'None'
(line 10) Configuration error: Ignoring configuration value 'None'
(line 12) Configuration error: Ignoring configuration value 'None'
(line 13) Configuration error: Ignoring configuration value 'None'
(line 14) Configuration error: Ignoring configuration value 'None'
(line 15) Configuration error: Ignoring configuration value 'None'
(line 16) Configuration error: Ignoring configuration value 'None'
(line 18) Configuration error: [machine] section contains unrecognised property actual_filament_diameter = 0
(line 19) Configuration error: Ignoring configuration value 'None'
(line 20) Configuration error: Ignoring configuration value 'None'
(line 21) Configuration error: Ignoring configuration value 'None'
(line 23) Configuration error: Ignoring configuration value 'None'
(line 31) Configuration error: Ignoring configuration value 'None'
(line 32) Configuration error: Ignoring configuration value 'None'
(line 34) Configuration error: Ignoring configuration value 'None'
(line 35) Configuration error: Ignoring configuration value 'None'
(line 36) Configuration error: Ignoring configuration value 'None'
(line 37) Configuration error: Ignoring configuration value 'None'
(line 38) Configuration error: Ignoring configuration value 'None'
(line 40) Configuration error: Ignoring configuration value 'None'
(line 41) Configuration error: Ignoring configuration value 'None'
(line 42) Configuration error: Ignoring configuration value 'None'
(line 43) Configuration error: Ignoring configuration value 'None'
(line 45) Configuration error: Ignoring configuration value 'None'
(line 46) Configuration error: Ignoring configuration value 'None'
(line 47) Configuration error: Ignoring configuration value 'None'
(line 48) Configuration error: Ignoring configuration value 'None'
(line 50) Configuration error: Ignoring configuration value 'None'
(line 51) Configuration error: Ignoring configuration value 'None'
(line 52) Configuration error: Ignoring configuration value 'None'
(line 53) Configuration error: Ignoring configuration value 'None'
(line 2) Configuration syntax error in /home/pi/.octoprint/data/GPX/gpx.ini: unrecognized parameters
Opening port: /dev/ttyACM0.
gpx connected to /dev/ttyACM0
(line 2) Configuration error: Ignoring configuration value 'None'
(line 3) Configuration error: Ignoring configuration value 'None'
(line 4) Configuration error: Ignoring configuration value 'None'
(line 5) Configuration error: Ignoring configuration value 'None'
(line 7) Configuration error: Ignoring configuration value 'None'
(line 8) Configuration error: Ignoring configuration value 'None'
(line 9) Configuration error: Ignoring configuration value 'None'
(line 10) Configuration error: Ignoring configuration value 'None'
(line 12) Configuration error: Ignoring configuration value 'None'
(line 13) Configuration error: Ignoring configuration value 'None'
(line 14) Configuration error: Ignoring configuration value 'None'
(line 15) Configuration error: Ignoring configuration value 'None'
(line 16) Configuration error: Ignoring configuration value 'None'
(line 18) Configuration error: [machine] section contains unrecognised property actual_filament_diameter = 0
(line 19) Configuration error: Ignoring configuration value 'None'
(line 20) Configuration error: Ignoring configuration value 'None'
(line 21) Configuration error: Ignoring configuration value 'None'
(line 23) Configuration error: Ignoring configuration value 'None'
(line 31) Configuration error: Ignoring configuration value 'None'
(line 32) Configuration error: Ignoring configuration value 'None'
(line 34) Configuration error: Ignoring configuration value 'None'
(line 35) Configuration error: Ignoring configuration value 'None'
(line 36) Configuration error: Ignoring configuration value 'None'
(line 37) Configuration error: Ignoring configuration value 'None'
(line 38) Configuration error: Ignoring configuration value 'None'
(line 40) Configuration error: Ignoring configuration value 'None'
(line 41) Configuration error: Ignoring configuration value 'None'
(line 42) Configuration error: Ignoring configuration value 'None'
(line 43) Configuration error: Ignoring configuration value 'None'
(line 45) Configuration error: Ignoring configuration value 'None'
(line 46) Configuration error: Ignoring configuration value 'None'
(line 47) Configuration error: Ignoring configuration value 'None'
(line 48) Configuration error: Ignoring configuration value 'None'
(line 50) Configuration error: Ignoring configuration value 'None'
(line 51) Configuration error: Ignoring configuration value 'None'
(line 52) Configuration error: Ignoring configuration value 'None'
(line 53) Configuration error: Ignoring configuration value 'None'
(line 2) Configuration syntax error in /home/pi/.octoprint/data/GPX/gpx.ini: unrecognized parameters
Opening port: /dev/ttyACM0.
gpx connected to /dev/ttyACM0
(line 2) Configuration error: Ignoring configuration value 'None'
(line 3) Configuration error: Ignoring configuration value 'None'
(line 4) Configuration error: Ignoring configuration value 'None'
(line 5) Configuration error: Ignoring configuration value 'None'
(line 7) Configuration error: Ignoring configuration value 'None'
(line 8) Configuration error: Ignoring configuration value 'None'
(line 9) Configuration error: Ignoring configuration value 'None'
(line 10) Configuration error: Ignoring configuration value 'None'
(line 12) Configuration error: Ignoring configuration value 'None'
(line 13) Configuration error: Ignoring configuration value 'None'
(line 14) Configuration error: Ignoring configuration value 'None'
(line 15) Configuration error: Ignoring configuration value 'None'
(line 16) Configuration error: Ignoring configuration value 'None'
(line 18) Configuration error: [machine] section contains unrecognised property actual_filament_diameter = 0
(line 19) Configuration error: Ignoring configuration value 'None'
(line 20) Configuration error: Ignoring configuration value 'None'
(line 21) Configuration error: Ignoring configuration value 'None'
(line 23) Configuration error: Ignoring configuration value 'None'
(line 31) Configuration error: Ignoring configuration value 'None'
(line 32) Configuration error: Ignoring configuration value 'None'
(line 34) Configuration error: Ignoring configuration value 'None'
(line 35) Configuration error: Ignoring configuration value 'None'
(line 36) Configuration error: Ignoring configuration value 'None'
(line 37) Configuration error: Ignoring configuration value 'None'
(line 38) Configuration error: Ignoring configuration value 'None'
(line 40) Configuration error: Ignoring configuration value 'None'
(line 41) Configuration error: Ignoring configuration value 'None'
(line 42) Configuration error: Ignoring configuration value 'None'
(line 43) Configuration error: Ignoring configuration value 'None'
(line 45) Configuration error: Ignoring configuration value 'None'
(line 46) Configuration error: Ignoring configuration value 'None'
(line 47) Configuration error: Ignoring configuration value 'None'
(line 48) Configuration error: Ignoring configuration value 'None'
(line 50) Configuration error: Ignoring configuration value 'None'
(line 51) Configuration error: Ignoring configuration value 'None'
(line 52) Configuration error: Ignoring configuration value 'None'
(line 53) Configuration error: Ignoring configuration value 'None'
(line 2) Configuration syntax error in /home/pi/.octoprint/data/GPX/gpx.ini: unrecognized parameters
Opening port: /dev/ttyACM0.
gpx connected to /dev/ttyACM0
(line 2) Configuration error: Ignoring configuration value 'None'
(line 3) Configuration error: Ignoring configuration value 'None'
(line 4) Configuration error: Ignoring configuration value 'None'
(line 5) Configuration error: Ignoring configuration value 'None'
(line 7) Configuration error: Ignoring configuration value 'None'
(line 8) Configuration error: Ignoring configuration value 'None'
(line 9) Configuration error: Ignoring configuration value 'None'
(line 10) Configuration error: Ignoring configuration value 'None'
(line 12) Configuration error: Ignoring configuration value 'None'
(line 13) Configuration error: Ignoring configuration value 'None'
(line 14) Configuration error: Ignoring configuration value 'None'
(line 15) Configuration error: Ignoring configuration value 'None'
(line 16) Configuration error: Ignoring configuration value 'None'
(line 18) Configuration error: [machine] section contains unrecognised property actual_filament_diameter = 0
(line 19) Configuration error: Ignoring configuration value 'None'
(line 20) Configuration error: Ignoring configuration value 'None'
(line 21) Configuration error: Ignoring configuration value 'None'
(line 23) Configuration error: Ignoring configuration value 'None'
(line 31) Configuration error: Ignoring configuration value 'None'
(line 32) Configuration error: Ignoring configuration value 'None'
(line 34) Configuration error: Ignoring configuration value 'None'
(line 35) Configuration error: Ignoring configuration value 'None'
(line 36) Configuration error: Ignoring configuration value 'None'
(line 37) Configuration error: Ignoring configuration value 'None'
(line 38) Configuration error: Ignoring configuration value 'None'
(line 40) Configuration error: Ignoring configuration value 'None'
(line 41) Configuration error: Ignoring configuration value 'None'
(line 42) Configuration error: Ignoring configuration value 'None'
(line 43) Configuration error: Ignoring configuration value 'None'
(line 45) Configuration error: Ignoring configuration value 'None'
(line 46) Configuration error: Ignoring configuration value 'None'
(line 47) Configuration error: Ignoring configuration value 'None'
(line 48) Configuration error: Ignoring configuration value 'None'
(line 50) Configuration error: Ignoring configuration value 'None'
(line 51) Configuration error: Ignoring configuration value 'None'
(line 52) Configuration error: Ignoring configuration value 'None'
(line 53) Configuration error: Ignoring configuration value 'None'
(line 2) Configuration syntax error in /home/pi/.octoprint/data/GPX/gpx.ini: unrecognized parameters
Opening port: /dev/ttyACM0.
gpx connected to /dev/ttyACM0
(line 2) Configuration error: Ignoring configuration value 'None'
(line 3) Configuration error: Ignoring configuration value 'None'
(line 4) Configuration error: Ignoring configuration value 'None'
(line 5) Configuration error: Ignoring configuration value 'None'
(line 7) Configuration error: Ignoring configuration value 'None'
(line 8) Configuration error: Ignoring configuration value 'None'
(line 9) Configuration error: Ignoring configuration value 'None'
(line 10) Configuration error: Ignoring configuration value 'None'
(line 12) Configuration error: Ignoring configuration value 'None'
(line 13) Configuration error: Ignoring configuration value 'None'
(line 14) Configuration error: Ignoring configuration value 'None'
(line 15) Configuration error: Ignoring configuration value 'None'
(line 16) Configuration error: Ignoring configuration value 'None'
(line 18) Configuration error: [machine] section contains unrecognised property actual_filament_diameter = 0
(line 19) Configuration error: Ignoring configuration value 'None'
(line 20) Configuration error: Ignoring configuration value 'None'
(line 21) Configuration error: Ignoring configuration value 'None'
(line 23) Configuration error: Ignoring configuration value 'None'
(line 31) Configuration error: Ignoring configuration value 'None'
(line 32) Configuration error: Ignoring configuration value 'None'
(line 34) Configuration error: Ignoring configuration value 'None'
(line 35) Configuration error: Ignoring configuration value 'None'
(line 36) Configuration error: Ignoring configuration value 'None'
(line 37) Configuration error: Ignoring configuration value 'None'
(line 38) Configuration error: Ignoring configuration value 'None'
(line 40) Configuration error: Ignoring configuration value 'None'
(line 41) Configuration error: Ignoring configuration value 'None'
(line 42) Configuration error: Ignoring configuration value 'None'
(line 43) Configuration error: Ignoring configuration value 'None'
(line 45) Configuration error: Ignoring configuration value 'None'
(line 46) Configuration error: Ignoring configuration value 'None'
(line 47) Configuration error: Ignoring configuration value 'None'
(line 48) Configuration error: Ignoring configuration value 'None'
(line 50) Configuration error: Ignoring configuration value 'None'
(line 51) Configuration error: Ignoring configuration value 'None'
(line 52) Configuration error: Ignoring configuration value 'None'
(line 53) Configuration error: Ignoring configuration value 'None'
(line 2) Configuration syntax error in /home/pi/.octoprint/data/GPX/gpx.ini: unrecognized parameters
Opening port: /dev/ttyACM0.
gpx connected to /dev/ttyACM0
(line 2) Configuration error: Ignoring configuration value 'None'
(line 3) Configuration error: Ignoring configuration value 'None'
(line 4) Configuration error: Ignoring configuration value 'None'
(line 5) Configuration error: Ignoring configuration value 'None'
(line 7) Configuration error: Ignoring configuration value 'None'
(line 8) Configuration error: Ignoring configuration value 'None'
(line 9) Configuration error: Ignoring configuration value 'None'
(line 10) Configuration error: Ignoring configuration value 'None'
(line 12) Configuration error: Ignoring configuration value 'None'
(line 13) Configuration error: Ignoring configuration value 'None'
(line 14) Configuration error: Ignoring configuration value 'None'
(line 15) Configuration error: Ignoring configuration value 'None'
(line 16) Configuration error: Ignoring configuration value 'None'
(line 18) Configuration error: [machine] section contains unrecognised property actual_filament_diameter = 0
(line 19) Configuration error: Ignoring configuration value 'None'
(line 20) Configuration error: Ignoring configuration value 'None'
(line 21) Configuration error: Ignoring configuration value 'None'
(line 23) Configuration error: Ignoring configuration value 'None'
(line 31) Configuration error: Ignoring configuration value 'None'
(line 32) Configuration error: Ignoring configuration value 'None'
(line 34) Configuration error: Ignoring configuration value 'None'
(line 35) Configuration error: Ignoring configuration value 'None'
(line 36) Configuration error: Ignoring configuration value 'None'
(line 37) Configuration error: Ignoring configuration value 'None'
(line 38) Configuration error: Ignoring configuration value 'None'
(line 40) Configuration error: Ignoring configuration value 'None'
(line 41) Configuration error: Ignoring configuration value 'None'
(line 42) Configuration error: Ignoring configuration value 'None'
(line 43) Configuration error: Ignoring configuration value 'None'
(line 45) Configuration error: Ignoring configuration value 'None'
(line 46) Configuration error: Ignoring configuration value 'None'
(line 47) Configuration error: Ignoring configuration value 'None'
(line 48) Configuration error: Ignoring configuration value 'None'
(line 50) Configuration error: Ignoring configuration value 'None'
(line 51) Configuration error: Ignoring configuration value 'None'
(line 52) Configuration error: Ignoring configuration value 'None'
(line 53) Configuration error: Ignoring configuration value 'None'
(line 2) Configuration syntax error in /home/pi/.octoprint/data/GPX/gpx.ini: unrecognized parameters
Opening port: /dev/ttyACM0.
gpx connected to /dev/ttyACM0
(line 2) Configuration error: Ignoring configuration value 'None'
(line 3) Configuration error: Ignoring configuration value 'None'
(line 4) Configuration error: Ignoring configuration value 'None'
(line 5) Configuration error: Ignoring configuration value 'None'
(line 7) Configuration error: Ignoring configuration value 'None'
(line 8) Configuration error: Ignoring configuration value 'None'
(line 9) Configuration error: Ignoring configuration value 'None'
(line 10) Configuration error: Ignoring configuration value 'None'
(line 12) Configuration error: Ignoring configuration value 'None'
(line 13) Configuration error: Ignoring configuration value 'None'
(line 14) Configuration error: Ignoring configuration value 'None'
(line 15) Configuration error: Ignoring configuration value 'None'
(line 16) Configuration error: Ignoring configuration value 'None'
(line 18) Configuration error: [machine] section contains unrecognised property actual_filament_diameter = 0
(line 19) Configuration error: Ignoring configuration value 'None'
(line 20) Configuration error: Ignoring configuration value 'None'
(line 21) Configuration error: Ignoring configuration value 'None'
(line 23) Configuration error: Ignoring configuration value 'None'
(line 31) Configuration error: Ignoring configuration value 'None'
(line 32) Configuration error: Ignoring configuration value 'None'
(line 34) Configuration error: Ignoring configuration value 'None'
(line 35) Configuration error: Ignoring configuration value 'None'
(line 36) Configuration error: Ignoring configuration value 'None'
(line 37) Configuration error: Ignoring configuration value 'None'
(line 38) Configuration error: Ignoring configuration value 'None'
(line 40) Configuration error: Ignoring configuration value 'None'
(line 41) Configuration error: Ignoring configuration value 'None'
(line 42) Configuration error: Ignoring configuration value 'None'
(line 43) Configuration error: Ignoring configuration value 'None'
(line 45) Configuration error: Ignoring configuration value 'None'
(line 46) Configuration error: Ignoring configuration value 'None'
(line 47) Configuration error: Ignoring configuration value 'None'
(line 48) Configuration error: Ignoring configuration value 'None'
(line 50) Configuration error: Ignoring configuration value 'None'
(line 51) Configuration error: Ignoring configuration value 'None'
(line 52) Configuration error: Ignoring configuration value 'None'
(line 53) Configuration error: Ignoring configuration value 'None'
(line 2) Configuration syntax error in /home/pi/.octoprint/data/GPX/gpx.ini: unrecognized parameters
Opening port: /dev/ttyACM0.
gpx connected to /dev/ttyACM0
(line 2) Configuration error: Ignoring configuration value 'None'
(line 3) Configuration error: Ignoring configuration value 'None'
(line 4) Configuration error: Ignoring configuration value 'None'
(line 5) Configuration error: Ignoring configuration value 'None'
(line 7) Configuration error: Ignoring configuration value 'None'
(line 8) Configuration error: Ignoring configuration value 'None'
(line 9) Configuration error: Ignoring configuration value 'None'
(line 10) Configuration error: Ignoring configuration value 'None'
(line 12) Configuration error: Ignoring configuration value 'None'
(line 13) Configuration error: Ignoring configuration value 'None'
(line 14) Configuration error: Ignoring configuration value 'None'
(line 15) Configuration error: Ignoring configuration value 'None'
(line 16) Configuration error: Ignoring configuration value 'None'
(line 18) Configuration error: [machine] section contains unrecognised property actual_filament_diameter = 0
(line 19) Configuration error: Ignoring configuration value 'None'
(line 20) Configuration error: Ignoring configuration value 'None'
(line 21) Configuration error: Ignoring configuration value 'None'
(line 23) Configuration error: Ignoring configuration value 'None'
(line 31) Configuration error: Ignoring configuration value 'None'
(line 32) Configuration error: Ignoring configuration value 'None'
(line 34) Configuration error: Ignoring configuration value 'None'
(line 35) Configuration error: Ignoring configuration value 'None'
(line 36) Configuration error: Ignoring configuration value 'None'
(line 37) Configuration error: Ignoring configuration value 'None'
(line 38) Configuration error: Ignoring configuration value 'None'
(line 40) Configuration error: Ignoring configuration value 'None'
(line 41) Configuration error: Ignoring configuration value 'None'
(line 42) Configuration error: Ignoring configuration value 'None'
(line 43) Configuration error: Ignoring configuration value 'None'
(line 45) Configuration error: Ignoring configuration value 'None'
(line 46) Configuration error: Ignoring configuration value 'None'
(line 47) Configuration error: Ignoring configuration value 'None'
(line 48) Configuration error: Ignoring configuration value 'None'
(line 50) Configuration error: Ignoring configuration value 'None'
(line 51) Configuration error: Ignoring configuration value 'None'
(line 52) Configuration error: Ignoring configuration value 'None'
(line 53) Configuration error: Ignoring configuration value 'None'
(line 2) Configuration syntax error in /home/pi/.octoprint/data/GPX/gpx.ini: unrecognized parameters
Opening port: /dev/ttyACM0.
gpx connected to /dev/ttyACM0
(line 5) Configuration error: [machine] section contains unrecognised property actual_filament_diameter = 0
(line 5) Configuration syntax error in /home/pi/.octoprint/data/GPX/gpx.ini: unrecognized parameters
Opening port: /dev/ttyACM0.
gpx connected to /dev/ttyACM0
(line 5) Configuration error: [machine] section contains unrecognised property actual_filament_diameter = 0
(line 5) Configuration syntax error in /home/pi/.octoprint/data/GPX/gpx.ini: unrecognized parameters
Opening port: /dev/ttyACM0.
gpx connected to /dev/ttyACM0
(line 5) Configuration error: [machine] section contains unrecognised property actual_filament_diameter = 0
(line 5) Configuration syntax error in /home/pi/.octoprint/data/GPX/gpx.ini: unrecognized parameters
Opening port: /dev/ttyACM0.
gpx connected to /dev/ttyACM0
(line 5) Configuration error: [machine] section contains unrecognised property actual_filament_diameter = 0
(line 5) Configuration syntax error in /home/pi/.octoprint/data/GPX/gpx.ini: unrecognized parameters
Opening port: /dev/ttyACM0.
gpx connected to /dev/ttyACM0
(line 5) Configuration error: [machine] section contains unrecognised property actual_filament_diameter = 0
(line 5) Configuration syntax error in /home/pi/.octoprint/data/GPX/gpx.ini: unrecognized parameters
Opening port: /dev/ttyACM0.
gpx connected to /dev/ttyACM0
(line 2) Configuration syntax error in /home/pi/.octoprint/data/GPX/gpx.ini: unrecognized parameters
Loading config: /home/pi/.octoprint/data/GPX/gpx.ini
(line 5) Configuration error: [machine] section contains unrecognised property actual_filament_diameter = 0
gpx_set_machine: r2x
Loading machine definition: Replicator 2X
Unable to access: /home/pi/.octoprint/data/GPX/r2x.ini
(line 5) Configuration syntax error in /home/pi/.octoprint/data/GPX/gpx.ini: unrecognized parameters
Opening port: /dev/ttyACM0.
Communicating via: /dev/ttyACM0
gpx connected to /dev/ttyACM0
port_handler write: 6
d5 03 1b 32 00 37 
port_handler read:
d5 d5 81 c2 02 00 00 01 00 00 00 a1 
Makerbot firmware v7.6
gpx_return_translation rval = 0
port_handler write: 6
d5 03 1b 32 00 37 
port_handler read:
d5 d5 81 c2 02 00 00 01 00 00 00 a1 
Makerbot firmware v7.6
waiting in gpx_write_string
gcode_line: M21
port_handler write: 5
d5 02 12 01 23 
port_handler read:
d5 d5 81 00 53 79 73 74 65 6d 20 56 6f 6c 75 6d 65 20 49 6e 66 6f 72 6d 61 74 69 6f 6e 00 47 
Get next filename: 'System Volume Information' operation successful
gpx_write_string_core rval = 0
leaving gpx_write_string_core 32
gpx_return_translation rval = 0
gpx_return_translation rval = 0
waiting in gpx_write_string
gcode_line: N0 M110 N0*125
gpx_write_string_core rval = 0
leaving gpx_write_string_core 32
implicit M105
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 32 00 75 
Extruder T0 temperature: 50c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 44 00 69 
Build platform T0 temperature: 68c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
implicit M105 rval = 0
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 32 00 75 
Extruder T0 temperature: 50c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 44 00 69 
Build platform T0 temperature: 68c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 32 00 75 
Extruder T0 temperature: 50c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 44 00 69 
Build platform T0 temperature: 68c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 31 00 20 
Extruder T0 temperature: 49c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 43 00 07 
Build platform T0 temperature: 67c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 31 00 20 
Extruder T0 temperature: 49c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 43 00 07 
Build platform T0 temperature: 67c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 31 00 20 
Extruder T0 temperature: 49c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 43 00 07 
Build platform T0 temperature: 67c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 31 00 20 
Extruder T0 temperature: 49c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 43 00 07 
Build platform T0 temperature: 67c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 31 00 20 
Extruder T0 temperature: 49c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 43 00 07 
Build platform T0 temperature: 67c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 31 00 20 
Extruder T0 temperature: 49c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 43 00 07 
Build platform T0 temperature: 67c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 31 00 20 
Extruder T0 temperature: 49c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 43 00 07 
Build platform T0 temperature: 67c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 31 00 20 
Extruder T0 temperature: 49c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 43 00 07 
Build platform T0 temperature: 67c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 31 00 20 
Extruder T0 temperature: 49c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 43 00 07 
Build platform T0 temperature: 67c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 31 00 20 
Extruder T0 temperature: 49c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 43 00 07 
Build platform T0 temperature: 67c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 30 00 e4 
Extruder T0 temperature: 48c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 42 00 c3 
Build platform T0 temperature: 66c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 30 00 e4 
Extruder T0 temperature: 48c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 42 00 c3 
Build platform T0 temperature: 66c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 30 00 e4 
Extruder T0 temperature: 48c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 42 00 c3 
Build platform T0 temperature: 66c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 30 00 e4 
Extruder T0 temperature: 48c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 42 00 c3 
Build platform T0 temperature: 66c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 30 00 e4 
Extruder T0 temperature: 48c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 42 00 c3 
Build platform T0 temperature: 66c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 30 00 e4 
Extruder T0 temperature: 48c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 42 00 c3 
Build platform T0 temperature: 66c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 30 00 e4 
Extruder T0 temperature: 48c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 42 00 c3 
Build platform T0 temperature: 66c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 30 00 e4 
Extruder T0 temperature: 48c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 42 00 c3 
Build platform T0 temperature: 66c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 30 00 e4 
Extruder T0 temperature: 48c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 42 00 c3 
Build platform T0 temperature: 66c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2f 00 10 
Extruder T0 temperature: 47c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 41 00 96 
Build platform T0 temperature: 65c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2f 00 10 
Extruder T0 temperature: 47c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 41 00 96 
Build platform T0 temperature: 65c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2f 00 10 
Extruder T0 temperature: 47c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 41 00 96 
Build platform T0 temperature: 65c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2f 00 10 
Extruder T0 temperature: 47c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 41 00 96 
Build platform T0 temperature: 65c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2f 00 10 
Extruder T0 temperature: 47c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 41 00 96 
Build platform T0 temperature: 65c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2f 00 10 
Extruder T0 temperature: 47c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 41 00 96 
Build platform T0 temperature: 65c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2f 00 10 
Extruder T0 temperature: 47c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 41 00 96 
Build platform T0 temperature: 65c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2f 00 10 
Extruder T0 temperature: 47c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 41 00 96 
Build platform T0 temperature: 65c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2f 00 10 
Extruder T0 temperature: 47c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 41 00 96 
Build platform T0 temperature: 65c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2f 00 10 
Extruder T0 temperature: 47c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 41 00 96 
Build platform T0 temperature: 65c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2e 00 d4 
Extruder T0 temperature: 46c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 41 00 96 
Build platform T0 temperature: 65c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2e 00 d4 
Extruder T0 temperature: 46c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 40 00 52 
Build platform T0 temperature: 64c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2e 00 d4 
Extruder T0 temperature: 46c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 40 00 52 
Build platform T0 temperature: 64c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2e 00 d4 
Extruder T0 temperature: 46c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 40 00 52 
Build platform T0 temperature: 64c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2e 00 d4 
Extruder T0 temperature: 46c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 40 00 52 
Build platform T0 temperature: 64c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2e 00 d4 
Extruder T0 temperature: 46c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 40 00 52 
Build platform T0 temperature: 64c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2e 00 d4 
Extruder T0 temperature: 46c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 40 00 52 
Build platform T0 temperature: 64c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2e 00 d4 
Extruder T0 temperature: 46c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 40 00 52 
Build platform T0 temperature: 64c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2e 00 d4 
Extruder T0 temperature: 46c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 40 00 52 
Build platform T0 temperature: 64c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2e 00 d4 
Extruder T0 temperature: 46c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 40 00 52 
Build platform T0 temperature: 64c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2e 00 d4 
Extruder T0 temperature: 46c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3f 00 fc 
Build platform T0 temperature: 63c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2d 00 81 
Extruder T0 temperature: 45c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3f 00 fc 
Build platform T0 temperature: 63c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2d 00 81 
Extruder T0 temperature: 45c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3f 00 fc 
Build platform T0 temperature: 63c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2d 00 81 
Extruder T0 temperature: 45c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3f 00 fc 
Build platform T0 temperature: 63c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2d 00 81 
Extruder T0 temperature: 45c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3f 00 fc 
Build platform T0 temperature: 63c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2d 00 81 
Extruder T0 temperature: 45c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3f 00 fc 
Build platform T0 temperature: 63c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2d 00 81 
Extruder T0 temperature: 45c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3f 00 fc 
Build platform T0 temperature: 63c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2d 00 81 
Extruder T0 temperature: 45c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3f 00 fc 
Build platform T0 temperature: 63c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2d 00 81 
Extruder T0 temperature: 45c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3f 00 fc 
Build platform T0 temperature: 63c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2d 00 81 
Extruder T0 temperature: 45c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3f 00 fc 
Build platform T0 temperature: 63c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2d 00 81 
Extruder T0 temperature: 45c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3e 00 38 
Build platform T0 temperature: 62c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2d 00 81 
Extruder T0 temperature: 45c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3e 00 38 
Build platform T0 temperature: 62c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2d 00 81 
Extruder T0 temperature: 45c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3e 00 38 
Build platform T0 temperature: 62c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2c 00 45 
Extruder T0 temperature: 44c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3e 00 38 
Build platform T0 temperature: 62c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2c 00 45 
Extruder T0 temperature: 44c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3e 00 38 
Build platform T0 temperature: 62c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2c 00 45 
Extruder T0 temperature: 44c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3e 00 38 
Build platform T0 temperature: 62c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2c 00 45 
Extruder T0 temperature: 44c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3e 00 38 
Build platform T0 temperature: 62c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2c 00 45 
Extruder T0 temperature: 44c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3e 00 38 
Build platform T0 temperature: 62c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2c 00 45 
Extruder T0 temperature: 44c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3e 00 38 
Build platform T0 temperature: 62c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2c 00 45 
Extruder T0 temperature: 44c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3e 00 38 
Build platform T0 temperature: 62c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2c 00 45 
Extruder T0 temperature: 44c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3e 00 38 
Build platform T0 temperature: 62c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2c 00 45 
Extruder T0 temperature: 44c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3e 00 38 
Build platform T0 temperature: 62c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2c 00 45 
Extruder T0 temperature: 44c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3e 00 38 
Build platform T0 temperature: 62c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2c 00 45 
Extruder T0 temperature: 44c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3d 00 6d 
Build platform T0 temperature: 61c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2c 00 45 
Extruder T0 temperature: 44c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3d 00 6d 
Build platform T0 temperature: 61c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2c 00 45 
Extruder T0 temperature: 44c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3d 00 6d 
Build platform T0 temperature: 61c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2c 00 45 
Extruder T0 temperature: 44c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3d 00 6d 
Build platform T0 temperature: 61c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2b 00 2b 
Extruder T0 temperature: 43c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3d 00 6d 
Build platform T0 temperature: 61c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2b 00 2b 
Extruder T0 temperature: 43c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3d 00 6d 
Build platform T0 temperature: 61c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2b 00 2b 
Extruder T0 temperature: 43c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3d 00 6d 
Build platform T0 temperature: 61c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2b 00 2b 
Extruder T0 temperature: 43c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3d 00 6d 
Build platform T0 temperature: 61c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2b 00 2b 
Extruder T0 temperature: 43c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3d 00 6d 
Build platform T0 temperature: 61c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2b 00 2b 
Extruder T0 temperature: 43c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3d 00 6d 
Build platform T0 temperature: 61c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2b 00 2b 
Extruder T0 temperature: 43c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3d 00 6d 
Build platform T0 temperature: 61c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2b 00 2b 
Extruder T0 temperature: 43c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3c 00 a9 
Build platform T0 temperature: 60c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2b 00 2b 
Extruder T0 temperature: 43c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3c 00 a9 
Build platform T0 temperature: 60c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2b 00 2b 
Extruder T0 temperature: 43c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3c 00 a9 
Build platform T0 temperature: 60c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2b 00 2b 
Extruder T0 temperature: 43c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3c 00 a9 
Build platform T0 temperature: 60c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2b 00 2b 
Extruder T0 temperature: 43c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3c 00 a9 
Build platform T0 temperature: 60c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2b 00 2b 
Extruder T0 temperature: 43c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3c 00 a9 
Build platform T0 temperature: 60c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2b 00 2b 
Extruder T0 temperature: 43c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3c 00 a9 
Build platform T0 temperature: 60c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2b 00 2b 
Extruder T0 temperature: 43c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3c 00 a9 
Build platform T0 temperature: 60c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2b 00 2b 
Extruder T0 temperature: 43c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3c 00 a9 
Build platform T0 temperature: 60c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2a 00 ef 
Extruder T0 temperature: 42c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3c 00 a9 
Build platform T0 temperature: 60c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2a 00 ef 
Extruder T0 temperature: 42c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3c 00 a9 
Build platform T0 temperature: 60c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2a 00 ef 
Extruder T0 temperature: 42c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3c 00 a9 
Build platform T0 temperature: 60c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2a 00 ef 
Extruder T0 temperature: 42c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3b 00 c7 
Build platform T0 temperature: 59c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2a 00 ef 
Extruder T0 temperature: 42c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3b 00 c7 
Build platform T0 temperature: 59c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2a 00 ef 
Extruder T0 temperature: 42c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3b 00 c7 
Build platform T0 temperature: 59c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2a 00 ef 
Extruder T0 temperature: 42c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3b 00 c7 
Build platform T0 temperature: 59c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2a 00 ef 
Extruder T0 temperature: 42c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3b 00 c7 
Build platform T0 temperature: 59c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2a 00 ef 
Extruder T0 temperature: 42c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3b 00 c7 
Build platform T0 temperature: 59c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2a 00 ef 
Extruder T0 temperature: 42c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3b 00 c7 
Build platform T0 temperature: 59c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2a 00 ef 
Extruder T0 temperature: 42c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3b 00 c7 
Build platform T0 temperature: 59c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2a 00 ef 
Extruder T0 temperature: 42c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3b 00 c7 
Build platform T0 temperature: 59c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2a 00 ef 
Extruder T0 temperature: 42c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3b 00 c7 
Build platform T0 temperature: 59c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2a 00 ef 
Extruder T0 temperature: 42c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3b 00 c7 
Build platform T0 temperature: 59c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 29 00 ba 
Extruder T0 temperature: 41c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3b 00 c7 
Build platform T0 temperature: 59c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 2a 00 ef 
Extruder T0 temperature: 42c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3a 00 03 
Build platform T0 temperature: 58c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 29 00 ba 
Extruder T0 temperature: 41c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3a 00 03 
Build platform T0 temperature: 58c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 29 00 ba 
Extruder T0 temperature: 41c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3a 00 03 
Build platform T0 temperature: 58c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 29 00 ba 
Extruder T0 temperature: 41c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3a 00 03 
Build platform T0 temperature: 58c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 29 00 ba 
Extruder T0 temperature: 41c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3a 00 03 
Build platform T0 temperature: 58c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 29 00 ba 
Extruder T0 temperature: 41c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3a 00 03 
Build platform T0 temperature: 58c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 29 00 ba 
Extruder T0 temperature: 41c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3a 00 03 
Build platform T0 temperature: 58c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 29 00 ba 
Extruder T0 temperature: 41c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3a 00 03 
Build platform T0 temperature: 58c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 29 00 ba 
Extruder T0 temperature: 41c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3a 00 03 
Build platform T0 temperature: 58c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 29 00 ba 
Extruder T0 temperature: 41c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3a 00 03 
Build platform T0 temperature: 58c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 29 00 ba 
Extruder T0 temperature: 41c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3a 00 03 
Build platform T0 temperature: 58c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 29 00 ba 
Extruder T0 temperature: 41c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3a 00 03 
Build platform T0 temperature: 58c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 29 00 ba 
Extruder T0 temperature: 41c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3a 00 03 
Build platform T0 temperature: 58c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 29 00 ba 
Extruder T0 temperature: 41c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3a 00 03 
Build platform T0 temperature: 58c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 29 00 ba 
Extruder T0 temperature: 41c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3a 00 03 
Build platform T0 temperature: 58c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 29 00 ba 
Extruder T0 temperature: 41c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 3a 00 03 
Build platform T0 temperature: 58c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 29 00 ba 
Extruder T0 temperature: 41c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 39 00 56 
Build platform T0 temperature: 57c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 29 00 ba 
Extruder T0 temperature: 41c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 39 00 56 
Build platform T0 temperature: 57c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 29 00 ba 
Extruder T0 temperature: 41c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 39 00 56 
Build platform T0 temperature: 57c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 28 00 7e 
Extruder T0 temperature: 40c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 39 00 56 
Build platform T0 temperature: 57c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 28 00 7e 
Extruder T0 temperature: 40c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 39 00 56 
Build platform T0 temperature: 57c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 28 00 7e 
Extruder T0 temperature: 40c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 39 00 56 
Build platform T0 temperature: 57c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 28 00 7e 
Extruder T0 temperature: 40c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 39 00 56 
Build platform T0 temperature: 57c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 28 00 7e 
Extruder T0 temperature: 40c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 39 00 56 
Build platform T0 temperature: 57c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 28 00 7e 
Extruder T0 temperature: 40c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 39 00 56 
Build platform T0 temperature: 57c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 28 00 7e 
Extruder T0 temperature: 40c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 39 00 56 
Build platform T0 temperature: 57c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 28 00 7e 
Extruder T0 temperature: 40c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 39 00 56 
Build platform T0 temperature: 57c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 28 00 7e 
Extruder T0 temperature: 40c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 39 00 56 
Build platform T0 temperature: 57c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 28 00 7e 
Extruder T0 temperature: 40c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 39 00 56 
Build platform T0 temperature: 57c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 28 00 7e 
Extruder T0 temperature: 40c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 39 00 56 
Build platform T0 temperature: 57c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 28 00 7e 
Extruder T0 temperature: 40c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 38 00 92 
Build platform T0 temperature: 56c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 28 00 7e 
Extruder T0 temperature: 40c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 38 00 92 
Build platform T0 temperature: 56c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 28 00 7e 
Extruder T0 temperature: 40c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 38 00 92 
Build platform T0 temperature: 56c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 28 00 7e 
Extruder T0 temperature: 40c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 38 00 92 
Build platform T0 temperature: 56c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 28 00 7e 
Extruder T0 temperature: 40c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 38 00 92 
Build platform T0 temperature: 56c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 28 00 7e 
Extruder T0 temperature: 40c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 38 00 92 
Build platform T0 temperature: 56c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 27 00 66 
Extruder T0 temperature: 39c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 38 00 92 
Build platform T0 temperature: 56c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 27 00 66 
Extruder T0 temperature: 39c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 38 00 92 
Build platform T0 temperature: 56c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 27 00 66 
Extruder T0 temperature: 39c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 38 00 92 
Build platform T0 temperature: 56c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 27 00 66 
Extruder T0 temperature: 39c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 38 00 92 
Build platform T0 temperature: 56c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 27 00 66 
Extruder T0 temperature: 39c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 38 00 92 
Build platform T0 temperature: 56c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 27 00 66 
Extruder T0 temperature: 39c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 38 00 92 
Build platform T0 temperature: 56c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 27 00 66 
Extruder T0 temperature: 39c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 38 00 92 
Build platform T0 temperature: 56c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 27 00 66 
Extruder T0 temperature: 39c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 38 00 92 
Build platform T0 temperature: 56c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 27 00 66 
Extruder T0 temperature: 39c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 38 00 92 
Build platform T0 temperature: 56c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 27 00 66 
Extruder T0 temperature: 39c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 37 00 8a 
Build platform T0 temperature: 55c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 27 00 66 
Extruder T0 temperature: 39c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 37 00 8a 
Build platform T0 temperature: 55c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 27 00 66 
Extruder T0 temperature: 39c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 37 00 8a 
Build platform T0 temperature: 55c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 27 00 66 
Extruder T0 temperature: 39c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 37 00 8a 
Build platform T0 temperature: 55c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 27 00 66 
Extruder T0 temperature: 39c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 37 00 8a 
Build platform T0 temperature: 55c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 27 00 66 
Extruder T0 temperature: 39c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 37 00 8a 
Build platform T0 temperature: 55c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 27 00 66 
Extruder T0 temperature: 39c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 37 00 8a 
Build platform T0 temperature: 55c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 27 00 66 
Extruder T0 temperature: 39c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 37 00 8a 
Build platform T0 temperature: 55c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 27 00 66 
Extruder T0 temperature: 39c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 37 00 8a 
Build platform T0 temperature: 55c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 26 00 a2 
Extruder T0 temperature: 38c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 37 00 8a 
Build platform T0 temperature: 55c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 26 00 a2 
Extruder T0 temperature: 38c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 37 00 8a 
Build platform T0 temperature: 55c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 27 00 66 
Extruder T0 temperature: 39c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 37 00 8a 
Build platform T0 temperature: 55c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 26 00 a2 
Extruder T0 temperature: 38c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 37 00 8a 
Build platform T0 temperature: 55c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 26 00 a2 
Extruder T0 temperature: 38c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 37 00 8a 
Build platform T0 temperature: 55c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 26 00 a2 
Extruder T0 temperature: 38c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 37 00 8a 
Build platform T0 temperature: 55c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 26 00 a2 
Extruder T0 temperature: 38c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 37 00 8a 
Build platform T0 temperature: 55c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 26 00 a2 
Extruder T0 temperature: 38c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 37 00 8a 
Build platform T0 temperature: 55c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 26 00 a2 
Extruder T0 temperature: 38c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 37 00 8a 
Build platform T0 temperature: 55c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 26 00 a2 
Extruder T0 temperature: 38c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 37 00 8a 
Build platform T0 temperature: 55c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 26 00 a2 
Extruder T0 temperature: 38c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 36 00 4e 
Build platform T0 temperature: 54c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 26 00 a2 
Extruder T0 temperature: 38c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 36 00 4e 
Build platform T0 temperature: 54c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 26 00 a2 
Extruder T0 temperature: 38c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 36 00 4e 
Build platform T0 temperature: 54c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 26 00 a2 
Extruder T0 temperature: 38c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 36 00 4e 
Build platform T0 temperature: 54c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 26 00 a2 
Extruder T0 temperature: 38c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 36 00 4e 
Build platform T0 temperature: 54c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 26 00 a2 
Extruder T0 temperature: 38c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 36 00 4e 
Build platform T0 temperature: 54c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 26 00 a2 
Extruder T0 temperature: 38c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 36 00 4e 
Build platform T0 temperature: 54c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 26 00 a2 
Extruder T0 temperature: 38c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 36 00 4e 
Build platform T0 temperature: 54c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 26 00 a2 
Extruder T0 temperature: 38c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T1 temperature: 33c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 36 00 4e 
Build platform T0 temperature: 54c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 26 00 a2 
Extruder T0 temperature: 38c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 36 00 4e 
Build platform T0 temperature: 54c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 26 00 a2 
Extruder T0 temperature: 38c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 36 00 4e 
Build platform T0 temperature: 54c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 26 00 a2 
Extruder T0 temperature: 38c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 36 00 4e 
Build platform T0 temperature: 54c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 25 00 f7 
Extruder T0 temperature: 37c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 36 00 4e 
Build platform T0 temperature: 54c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 25 00 f7 
Extruder T0 temperature: 37c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 36 00 4e 
Build platform T0 temperature: 54c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 26 00 a2 
Extruder T0 temperature: 38c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 36 00 4e 
Build platform T0 temperature: 54c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 25 00 f7 
Extruder T0 temperature: 37c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 36 00 4e 
Build platform T0 temperature: 54c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 25 00 f7 
Extruder T0 temperature: 37c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 36 00 4e 
Build platform T0 temperature: 54c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 25 00 f7 
Extruder T0 temperature: 37c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 35 00 1b 
Build platform T0 temperature: 53c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 25 00 f7 
Extruder T0 temperature: 37c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 35 00 1b 
Build platform T0 temperature: 53c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 25 00 f7 
Extruder T0 temperature: 37c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 35 00 1b 
Build platform T0 temperature: 53c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 25 00 f7 
Extruder T0 temperature: 37c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 35 00 1b 
Build platform T0 temperature: 53c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 25 00 f7 
Extruder T0 temperature: 37c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 35 00 1b 
Build platform T0 temperature: 53c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 25 00 f7 
Extruder T0 temperature: 37c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 35 00 1b 
Build platform T0 temperature: 53c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 25 00 f7 
Extruder T0 temperature: 37c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 35 00 1b 
Build platform T0 temperature: 53c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 25 00 f7 
Extruder T0 temperature: 37c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 35 00 1b 
Build platform T0 temperature: 53c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 25 00 f7 
Extruder T0 temperature: 37c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 35 00 1b 
Build platform T0 temperature: 53c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 25 00 f7 
Extruder T0 temperature: 37c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 35 00 1b 
Build platform T0 temperature: 53c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 25 00 f7 
Extruder T0 temperature: 37c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 35 00 1b 
Build platform T0 temperature: 53c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 25 00 f7 
Extruder T0 temperature: 37c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 35 00 1b 
Build platform T0 temperature: 53c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 25 00 f7 
Extruder T0 temperature: 37c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 35 00 1b 
Build platform T0 temperature: 53c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 25 00 f7 
Extruder T0 temperature: 37c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 35 00 1b 
Build platform T0 temperature: 53c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 25 00 f7 
Extruder T0 temperature: 37c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 35 00 1b 
Build platform T0 temperature: 53c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 25 00 f7 
Extruder T0 temperature: 37c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 35 00 1b 
Build platform T0 temperature: 53c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 25 00 f7 
Extruder T0 temperature: 37c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 35 00 1b 
Build platform T0 temperature: 53c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 25 00 f7 
Extruder T0 temperature: 37c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 34 00 df 
Build platform T0 temperature: 52c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 25 00 f7 
Extruder T0 temperature: 37c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 34 00 df 
Build platform T0 temperature: 52c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 25 00 f7 
Extruder T0 temperature: 37c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 34 00 df 
Build platform T0 temperature: 52c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 25 00 f7 
Extruder T0 temperature: 37c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 34 00 df 
Build platform T0 temperature: 52c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 25 00 f7 
Extruder T0 temperature: 37c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 34 00 df 
Build platform T0 temperature: 52c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 25 00 f7 
Extruder T0 temperature: 37c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 34 00 df 
Build platform T0 temperature: 52c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 25 00 f7 
Extruder T0 temperature: 37c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 34 00 df 
Build platform T0 temperature: 52c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 25 00 f7 
Extruder T0 temperature: 37c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 34 00 df 
Build platform T0 temperature: 52c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 24 00 33 
Extruder T0 temperature: 36c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 34 00 df 
Build platform T0 temperature: 52c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 24 00 33 
Extruder T0 temperature: 36c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 34 00 df 
Build platform T0 temperature: 52c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 24 00 33 
Extruder T0 temperature: 36c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 34 00 df 
Build platform T0 temperature: 52c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 24 00 33 
Extruder T0 temperature: 36c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 34 00 df 
Build platform T0 temperature: 52c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 24 00 33 
Extruder T0 temperature: 36c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 34 00 df 
Build platform T0 temperature: 52c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 24 00 33 
Extruder T0 temperature: 36c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 34 00 df 
Build platform T0 temperature: 52c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 24 00 33 
Extruder T0 temperature: 36c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 34 00 df 
Build platform T0 temperature: 52c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 24 00 33 
Extruder T0 temperature: 36c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 34 00 df 
Build platform T0 temperature: 52c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 24 00 33 
Extruder T0 temperature: 36c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 34 00 df 
Build platform T0 temperature: 52c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 24 00 33 
Extruder T0 temperature: 36c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 34 00 df 
Build platform T0 temperature: 52c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 24 00 33 
Extruder T0 temperature: 36c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 34 00 df 
Build platform T0 temperature: 52c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 24 00 33 
Extruder T0 temperature: 36c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 34 00 df 
Build platform T0 temperature: 52c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 24 00 33 
Extruder T0 temperature: 36c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 34 00 df 
Build platform T0 temperature: 52c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 24 00 33 
Extruder T0 temperature: 36c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 34 00 df 
Build platform T0 temperature: 52c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 24 00 33 
Extruder T0 temperature: 36c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 34 00 df 
Build platform T0 temperature: 52c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 24 00 33 
Extruder T0 temperature: 36c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 34 00 df 
Build platform T0 temperature: 52c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 24 00 33 
Extruder T0 temperature: 36c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 33 00 b1 
Build platform T0 temperature: 51c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 24 00 33 
Extruder T0 temperature: 36c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 33 00 b1 
Build platform T0 temperature: 51c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 24 00 33 
Extruder T0 temperature: 36c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 33 00 b1 
Build platform T0 temperature: 51c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 24 00 33 
Extruder T0 temperature: 36c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 33 00 b1 
Build platform T0 temperature: 51c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 24 00 33 
Extruder T0 temperature: 36c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 33 00 b1 
Build platform T0 temperature: 51c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 24 00 33 
Extruder T0 temperature: 36c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 33 00 b1 
Build platform T0 temperature: 51c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 24 00 33 
Extruder T0 temperature: 36c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 33 00 b1 
Build platform T0 temperature: 51c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 24 00 33 
Extruder T0 temperature: 36c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 33 00 b1 
Build platform T0 temperature: 51c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 24 00 33 
Extruder T0 temperature: 36c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 33 00 b1 
Build platform T0 temperature: 51c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 24 00 33 
Extruder T0 temperature: 36c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 33 00 b1 
Build platform T0 temperature: 51c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 24 00 33 
Extruder T0 temperature: 36c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 33 00 b1 
Build platform T0 temperature: 51c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 24 00 33 
Extruder T0 temperature: 36c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 33 00 b1 
Build platform T0 temperature: 51c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 24 00 33 
Extruder T0 temperature: 36c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 33 00 b1 
Build platform T0 temperature: 51c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 24 00 33 
Extruder T0 temperature: 36c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 33 00 b1 
Build platform T0 temperature: 51c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 24 00 33 
Extruder T0 temperature: 36c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 33 00 b1 
Build platform T0 temperature: 51c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 24 00 33 
Extruder T0 temperature: 36c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 33 00 b1 
Build platform T0 temperature: 51c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 24 00 33 
Extruder T0 temperature: 36c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 33 00 b1 
Build platform T0 temperature: 51c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 24 00 33 
Extruder T0 temperature: 36c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 33 00 b1 
Build platform T0 temperature: 51c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 24 00 33 
Extruder T0 temperature: 36c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 33 00 b1 
Build platform T0 temperature: 51c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 24 00 33 
Extruder T0 temperature: 36c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 33 00 b1 
Build platform T0 temperature: 51c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 24 00 33 
Extruder T0 temperature: 36c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 33 00 b1 
Build platform T0 temperature: 51c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 24 00 33 
Extruder T0 temperature: 36c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 32 00 75 
Build platform T0 temperature: 50c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 23 00 5d 
Extruder T0 temperature: 35c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 32 00 75 
Build platform T0 temperature: 50c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 23 00 5d 
Extruder T0 temperature: 35c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 32 00 75 
Build platform T0 temperature: 50c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 23 00 5d 
Extruder T0 temperature: 35c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 32 00 75 
Build platform T0 temperature: 50c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 23 00 5d 
Extruder T0 temperature: 35c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 32 00 75 
Build platform T0 temperature: 50c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 23 00 5d 
Extruder T0 temperature: 35c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 32 00 75 
Build platform T0 temperature: 50c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 23 00 5d 
Extruder T0 temperature: 35c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 32 00 75 
Build platform T0 temperature: 50c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 23 00 5d 
Extruder T0 temperature: 35c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 32 00 75 
Build platform T0 temperature: 50c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 23 00 5d 
Extruder T0 temperature: 35c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 32 00 75 
Build platform T0 temperature: 50c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 23 00 5d 
Extruder T0 temperature: 35c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 32 00 75 
Build platform T0 temperature: 50c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 23 00 5d 
Extruder T0 temperature: 35c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 32 00 75 
Build platform T0 temperature: 50c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 23 00 5d 
Extruder T0 temperature: 35c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 32 00 75 
Build platform T0 temperature: 50c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 23 00 5d 
Extruder T0 temperature: 35c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 32 00 75 
Build platform T0 temperature: 50c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 23 00 5d 
Extruder T0 temperature: 35c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 32 00 75 
Build platform T0 temperature: 50c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 23 00 5d 
Extruder T0 temperature: 35c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 32 00 75 
Build platform T0 temperature: 50c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 23 00 5d 
Extruder T0 temperature: 35c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 32 00 75 
Build platform T0 temperature: 50c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 23 00 5d 
Extruder T0 temperature: 35c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 32 00 75 
Build platform T0 temperature: 50c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 23 00 5d 
Extruder T0 temperature: 35c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 32 00 75 
Build platform T0 temperature: 50c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 23 00 5d 
Extruder T0 temperature: 35c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 32 00 75 
Build platform T0 temperature: 50c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 23 00 5d 
Extruder T0 temperature: 35c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 32 00 75 
Build platform T0 temperature: 50c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 23 00 5d 
Extruder T0 temperature: 35c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 32 00 75 
Build platform T0 temperature: 50c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 23 00 5d 
Extruder T0 temperature: 35c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 20 00 08 
Extruder T1 temperature: 32c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 32 00 75 
Build platform T0 temperature: 50c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 22 00 99 
Extruder T0 temperature: 34c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 32 00 75 
Build platform T0 temperature: 50c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 22 00 99 
Extruder T0 temperature: 34c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 31 00 20 
Build platform T0 temperature: 49c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 22 00 99 
Extruder T0 temperature: 34c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 31 00 20 
Build platform T0 temperature: 49c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 22 00 99 
Extruder T0 temperature: 34c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 31 00 20 
Build platform T0 temperature: 49c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 22 00 99 
Extruder T0 temperature: 34c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 31 00 20 
Build platform T0 temperature: 49c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 22 00 99 
Extruder T0 temperature: 34c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 31 00 20 
Build platform T0 temperature: 49c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 22 00 99 
Extruder T0 temperature: 34c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 31 00 20 
Build platform T0 temperature: 49c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 22 00 99 
Extruder T0 temperature: 34c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 31 00 20 
Build platform T0 temperature: 49c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 22 00 99 
Extruder T0 temperature: 34c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 31 00 20 
Build platform T0 temperature: 49c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 22 00 99 
Extruder T0 temperature: 34c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 31 00 20 
Build platform T0 temperature: 49c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 22 00 99 
Extruder T0 temperature: 34c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 31 00 20 
Build platform T0 temperature: 49c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 22 00 99 
Extruder T0 temperature: 34c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 31 00 20 
Build platform T0 temperature: 49c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 22 00 99 
Extruder T0 temperature: 34c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 31 00 20 
Build platform T0 temperature: 49c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 22 00 99 
Extruder T0 temperature: 34c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 31 00 20 
Build platform T0 temperature: 49c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
Loading config: /home/pi/.octoprint/data/GPX/gpx.ini
(line 5) Configuration error: [machine] section contains unrecognised property actual_filament_diameter = 0
gpx_set_machine: r2x
Loading machine definition: Replicator 2X
Unable to access: /home/pi/.octoprint/data/GPX/r2x.ini
(line 5) Configuration syntax error in /home/pi/.octoprint/data/GPX/gpx.ini: unrecognized parameters
Opening port: /dev/ttyACM0.
Communicating via: /dev/ttyACM0
gpx connected to /dev/ttyACM0
port_handler write: 6
d5 03 1b 32 00 37 
port_handler read:
d5 d5 81 c2 02 00 00 01 00 00 00 a1 
Makerbot firmware v7.6
gpx_return_translation rval = 0
port_handler write: 6
d5 03 1b 32 00 37 
port_handler read:
d5 d5 81 c2 02 00 00 01 00 00 00 a1 
Makerbot firmware v7.6
waiting in gpx_write_string
gcode_line: M21
port_handler write: 5
d5 02 12 01 23 
port_handler read:
d5 d5 81 00 53 79 73 74 65 6d 20 56 6f 6c 75 6d 65 20 49 6e 66 6f 72 6d 61 74 69 6f 6e 00 47 
Get next filename: 'System Volume Information' operation successful
gpx_write_string_core rval = 0
leaving gpx_write_string_core 32
gpx_return_translation rval = 0
gpx_return_translation rval = 0
waiting in gpx_write_string
gcode_line: N0 M110 N0*125
gpx_write_string_core rval = 0
leaving gpx_write_string_core 32
implicit M105
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 22 00 99 
Extruder T0 temperature: 34c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 30 00 e4 
Build platform T0 temperature: 48c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
implicit M105 rval = 0
gpx_return_translation rval = 0
waiting in gpx_write_string
gcode_line: N0 M110 N0*125
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
implicit M105
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 22 00 99 
Extruder T0 temperature: 34c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 30 00 e4 
Build platform T0 temperature: 48c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
implicit M105 rval = 0
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 22 00 99 
Extruder T0 temperature: 34c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 30 00 e4 
Build platform T0 temperature: 48c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 22 00 99 
Extruder T0 temperature: 34c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 30 00 e4 
Build platform T0 temperature: 48c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T0 temperature: 33c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 30 00 e4 
Build platform T0 temperature: 48c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T0 temperature: 33c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 30 00 e4 
Build platform T0 temperature: 48c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T0 temperature: 33c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 30 00 e4 
Build platform T0 temperature: 48c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T0 temperature: 33c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 30 00 e4 
Build platform T0 temperature: 48c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T0 temperature: 33c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 30 00 e4 
Build platform T0 temperature: 48c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T0 temperature: 33c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 30 00 e4 
Build platform T0 temperature: 48c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T0 temperature: 33c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 30 00 e4 
Build platform T0 temperature: 48c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T0 temperature: 33c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 30 00 e4 
Build platform T0 temperature: 48c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T0 temperature: 33c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 30 00 e4 
Build platform T0 temperature: 48c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T0 temperature: 33c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 30 00 e4 
Build platform T0 temperature: 48c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T0 temperature: 33c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 30 00 e4 
Build platform T0 temperature: 48c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T0 temperature: 33c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 30 00 e4 
Build platform T0 temperature: 48c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T0 temperature: 33c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 30 00 e4 
Build platform T0 temperature: 48c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T0 temperature: 33c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 30 00 e4 
Build platform T0 temperature: 48c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T0 temperature: 33c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 30 00 e4 
Build platform T0 temperature: 48c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T0 temperature: 33c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 30 00 e4 
Build platform T0 temperature: 48c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T0 temperature: 33c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 30 00 e4 
Build platform T0 temperature: 48c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T0 temperature: 33c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 30 00 e4 
Build platform T0 temperature: 48c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T0 temperature: 33c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 30 00 e4 
Build platform T0 temperature: 48c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T0 temperature: 33c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2f 00 10 
Build platform T0 temperature: 47c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T0 temperature: 33c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2f 00 10 
Build platform T0 temperature: 47c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T0 temperature: 33c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2f 00 10 
Build platform T0 temperature: 47c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T0 temperature: 33c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2f 00 10 
Build platform T0 temperature: 47c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T0 temperature: 33c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2f 00 10 
Build platform T0 temperature: 47c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T0 temperature: 33c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2f 00 10 
Build platform T0 temperature: 47c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T0 temperature: 33c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2f 00 10 
Build platform T0 temperature: 47c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T0 temperature: 33c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2f 00 10 
Build platform T0 temperature: 47c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T0 temperature: 33c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2f 00 10 
Build platform T0 temperature: 47c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T0 temperature: 33c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2f 00 10 
Build platform T0 temperature: 47c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T0 temperature: 33c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2f 00 10 
Build platform T0 temperature: 47c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T0 temperature: 33c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2f 00 10 
Build platform T0 temperature: 47c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T0 temperature: 33c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2f 00 10 
Build platform T0 temperature: 47c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T0 temperature: 33c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2f 00 10 
Build platform T0 temperature: 47c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T0 temperature: 33c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2f 00 10 
Build platform T0 temperature: 47c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T0 temperature: 33c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2f 00 10 
Build platform T0 temperature: 47c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T0 temperature: 33c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2f 00 10 
Build platform T0 temperature: 47c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T0 temperature: 33c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2f 00 10 
Build platform T0 temperature: 47c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T0 temperature: 33c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2f 00 10 
Build platform T0 temperature: 47c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T0 temperature: 33c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2f 00 10 
Build platform T0 temperature: 47c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T0 temperature: 33c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2f 00 10 
Build platform T0 temperature: 47c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T0 temperature: 33c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2f 00 10 
Build platform T0 temperature: 47c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T0 temperature: 33c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2f 00 10 
Build platform T0 temperature: 47c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T0 temperature: 33c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2e 00 d4 
Build platform T0 temperature: 46c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T0 temperature: 33c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2e 00 d4 
Build platform T0 temperature: 46c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T0 temperature: 33c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2e 00 d4 
Build platform T0 temperature: 46c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T0 temperature: 33c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2e 00 d4 
Build platform T0 temperature: 46c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T0 temperature: 33c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2e 00 d4 
Build platform T0 temperature: 46c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T0 temperature: 33c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2e 00 d4 
Build platform T0 temperature: 46c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T0 temperature: 33c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2e 00 d4 
Build platform T0 temperature: 46c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T0 temperature: 33c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2e 00 d4 
Build platform T0 temperature: 46c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T0 temperature: 33c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2e 00 d4 
Build platform T0 temperature: 46c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T0 temperature: 33c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2e 00 d4 
Build platform T0 temperature: 46c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T0 temperature: 33c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2e 00 d4 
Build platform T0 temperature: 46c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T0 temperature: 33c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2e 00 d4 
Build platform T0 temperature: 46c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T0 temperature: 33c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2e 00 d4 
Build platform T0 temperature: 46c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T0 temperature: 33c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2e 00 d4 
Build platform T0 temperature: 46c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T0 temperature: 33c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2e 00 d4 
Build platform T0 temperature: 46c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T0 temperature: 33c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2e 00 d4 
Build platform T0 temperature: 46c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T0 temperature: 33c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2e 00 d4 
Build platform T0 temperature: 46c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T0 temperature: 33c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2e 00 d4 
Build platform T0 temperature: 46c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T0 temperature: 33c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2e 00 d4 
Build platform T0 temperature: 46c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T0 temperature: 33c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2e 00 d4 
Build platform T0 temperature: 46c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2e 00 d4 
Build platform T0 temperature: 46c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 21 00 cc 
Extruder T0 temperature: 33c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2e 00 d4 
Build platform T0 temperature: 46c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2e 00 d4 
Build platform T0 temperature: 46c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2e 00 d4 
Build platform T0 temperature: 46c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2e 00 d4 
Build platform T0 temperature: 46c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2d 00 81 
Build platform T0 temperature: 45c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2d 00 81 
Build platform T0 temperature: 45c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2d 00 81 
Build platform T0 temperature: 45c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2d 00 81 
Build platform T0 temperature: 45c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2d 00 81 
Build platform T0 temperature: 45c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2d 00 81 
Build platform T0 temperature: 45c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2d 00 81 
Build platform T0 temperature: 45c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2d 00 81 
Build platform T0 temperature: 45c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2d 00 81 
Build platform T0 temperature: 45c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2d 00 81 
Build platform T0 temperature: 45c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2d 00 81 
Build platform T0 temperature: 45c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2d 00 81 
Build platform T0 temperature: 45c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2d 00 81 
Build platform T0 temperature: 45c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2d 00 81 
Build platform T0 temperature: 45c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2d 00 81 
Build platform T0 temperature: 45c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2d 00 81 
Build platform T0 temperature: 45c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2d 00 81 
Build platform T0 temperature: 45c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
Loading config: /home/pi/.octoprint/data/GPX/gpx.ini
(line 5) Configuration error: [machine] section contains unrecognised property actual_filament_diameter = 0
gpx_set_machine: r2x
Loading machine definition: Replicator 2X
Unable to access: /home/pi/.octoprint/data/GPX/r2x.ini
(line 5) Configuration syntax error in /home/pi/.octoprint/data/GPX/gpx.ini: unrecognized parameters
Opening port: /dev/ttyACM0.
Communicating via: /dev/ttyACM0
gpx connected to /dev/ttyACM0
port_handler write: 6
d5 03 1b 32 00 37 
port_handler read:
d5 d5 81 c2 02 00 00 01 00 00 00 a1 
Makerbot firmware v7.6
gpx_return_translation rval = 0
port_handler write: 6
d5 03 1b 32 00 37 
port_handler read:
d5 d5 81 c2 02 00 00 01 00 00 00 a1 
Makerbot firmware v7.6
waiting in gpx_write_string
gcode_line: M21
port_handler write: 5
d5 02 12 01 23 
port_handler read:
d5 d5 81 00 53 79 73 74 65 6d 20 56 6f 6c 75 6d 65 20 49 6e 66 6f 72 6d 61 74 69 6f 6e 00 47 
Get next filename: 'System Volume Information' operation successful
gpx_write_string_core rval = 0
leaving gpx_write_string_core 32
gpx_return_translation rval = 0
gpx_return_translation rval = 0
waiting in gpx_write_string
gcode_line: N0 M110 N0*125
gpx_write_string_core rval = 0
leaving gpx_write_string_core 32
implicit M105
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2d 00 81 
Build platform T0 temperature: 45c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
implicit M105 rval = 0
gpx_return_translation rval = 0
waiting in gpx_write_string
gcode_line: N0 M110 N0*125
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
implicit M105
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2d 00 81 
Build platform T0 temperature: 45c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
implicit M105 rval = 0
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2d 00 81 
Build platform T0 temperature: 45c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2d 00 81 
Build platform T0 temperature: 45c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2c 00 45 
Build platform T0 temperature: 44c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2c 00 45 
Build platform T0 temperature: 44c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2c 00 45 
Build platform T0 temperature: 44c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2c 00 45 
Build platform T0 temperature: 44c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2c 00 45 
Build platform T0 temperature: 44c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2c 00 45 
Build platform T0 temperature: 44c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2c 00 45 
Build platform T0 temperature: 44c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2c 00 45 
Build platform T0 temperature: 44c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2c 00 45 
Build platform T0 temperature: 44c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2c 00 45 
Build platform T0 temperature: 44c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2c 00 45 
Build platform T0 temperature: 44c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2c 00 45 
Build platform T0 temperature: 44c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2c 00 45 
Build platform T0 temperature: 44c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2c 00 45 
Build platform T0 temperature: 44c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2c 00 45 
Build platform T0 temperature: 44c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2c 00 45 
Build platform T0 temperature: 44c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2c 00 45 
Build platform T0 temperature: 44c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2c 00 45 
Build platform T0 temperature: 44c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2c 00 45 
Build platform T0 temperature: 44c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2c 00 45 
Build platform T0 temperature: 44c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2c 00 45 
Build platform T0 temperature: 44c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2c 00 45 
Build platform T0 temperature: 44c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2c 00 45 
Build platform T0 temperature: 44c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2b 00 2b 
Build platform T0 temperature: 43c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2b 00 2b 
Build platform T0 temperature: 43c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2b 00 2b 
Build platform T0 temperature: 43c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2b 00 2b 
Build platform T0 temperature: 43c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2b 00 2b 
Build platform T0 temperature: 43c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2b 00 2b 
Build platform T0 temperature: 43c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2b 00 2b 
Build platform T0 temperature: 43c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2b 00 2b 
Build platform T0 temperature: 43c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2b 00 2b 
Build platform T0 temperature: 43c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2b 00 2b 
Build platform T0 temperature: 43c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2b 00 2b 
Build platform T0 temperature: 43c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2b 00 2b 
Build platform T0 temperature: 43c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2b 00 2b 
Build platform T0 temperature: 43c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2b 00 2b 
Build platform T0 temperature: 43c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2b 00 2b 
Build platform T0 temperature: 43c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2b 00 2b 
Build platform T0 temperature: 43c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2b 00 2b 
Build platform T0 temperature: 43c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2b 00 2b 
Build platform T0 temperature: 43c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2b 00 2b 
Build platform T0 temperature: 43c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2b 00 2b 
Build platform T0 temperature: 43c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2b 00 2b 
Build platform T0 temperature: 43c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2b 00 2b 
Build platform T0 temperature: 43c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2b 00 2b 
Build platform T0 temperature: 43c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2b 00 2b 
Build platform T0 temperature: 43c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2b 00 2b 
Build platform T0 temperature: 43c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2b 00 2b 
Build platform T0 temperature: 43c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2b 00 2b 
Build platform T0 temperature: 43c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2b 00 2b 
Build platform T0 temperature: 43c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2b 00 2b 
Build platform T0 temperature: 43c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2b 00 2b 
Build platform T0 temperature: 43c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2b 00 2b 
Build platform T0 temperature: 43c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2a 00 ef 
Build platform T0 temperature: 42c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2b 00 2b 
Build platform T0 temperature: 43c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2a 00 ef 
Build platform T0 temperature: 42c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2a 00 ef 
Build platform T0 temperature: 42c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2a 00 ef 
Build platform T0 temperature: 42c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2a 00 ef 
Build platform T0 temperature: 42c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2a 00 ef 
Build platform T0 temperature: 42c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2a 00 ef 
Build platform T0 temperature: 42c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2a 00 ef 
Build platform T0 temperature: 42c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2a 00 ef 
Build platform T0 temperature: 42c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2a 00 ef 
Build platform T0 temperature: 42c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2a 00 ef 
Build platform T0 temperature: 42c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2a 00 ef 
Build platform T0 temperature: 42c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2a 00 ef 
Build platform T0 temperature: 42c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2a 00 ef 
Build platform T0 temperature: 42c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2a 00 ef 
Build platform T0 temperature: 42c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2a 00 ef 
Build platform T0 temperature: 42c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2a 00 ef 
Build platform T0 temperature: 42c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2a 00 ef 
Build platform T0 temperature: 42c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2a 00 ef 
Build platform T0 temperature: 42c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2a 00 ef 
Build platform T0 temperature: 42c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2a 00 ef 
Build platform T0 temperature: 42c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2a 00 ef 
Build platform T0 temperature: 42c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2a 00 ef 
Build platform T0 temperature: 42c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2a 00 ef 
Build platform T0 temperature: 42c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 20 00 08 
Extruder T0 temperature: 32c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2a 00 ef 
Build platform T0 temperature: 42c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2a 00 ef 
Build platform T0 temperature: 42c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2a 00 ef 
Build platform T0 temperature: 42c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2a 00 ef 
Build platform T0 temperature: 42c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2a 00 ef 
Build platform T0 temperature: 42c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2a 00 ef 
Build platform T0 temperature: 42c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2a 00 ef 
Build platform T0 temperature: 42c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2a 00 ef 
Build platform T0 temperature: 42c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2a 00 ef 
Build platform T0 temperature: 42c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2a 00 ef 
Build platform T0 temperature: 42c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2a 00 ef 
Build platform T0 temperature: 42c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 29 00 ba 
Build platform T0 temperature: 41c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 2a 00 ef 
Build platform T0 temperature: 42c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 29 00 ba 
Build platform T0 temperature: 41c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 29 00 ba 
Build platform T0 temperature: 41c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 29 00 ba 
Build platform T0 temperature: 41c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 29 00 ba 
Build platform T0 temperature: 41c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 29 00 ba 
Build platform T0 temperature: 41c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 29 00 ba 
Build platform T0 temperature: 41c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T1 temperature: 31c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 29 00 ba 
Build platform T0 temperature: 41c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 29 00 ba 
Build platform T0 temperature: 41c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 29 00 ba 
Build platform T0 temperature: 41c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 29 00 ba 
Build platform T0 temperature: 41c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 29 00 ba 
Build platform T0 temperature: 41c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 29 00 ba 
Build platform T0 temperature: 41c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 29 00 ba 
Build platform T0 temperature: 41c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 29 00 ba 
Build platform T0 temperature: 41c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 29 00 ba 
Build platform T0 temperature: 41c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 29 00 ba 
Build platform T0 temperature: 41c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 29 00 ba 
Build platform T0 temperature: 41c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 29 00 ba 
Build platform T0 temperature: 41c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 29 00 ba 
Build platform T0 temperature: 41c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 29 00 ba 
Build platform T0 temperature: 41c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 29 00 ba 
Build platform T0 temperature: 41c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 29 00 ba 
Build platform T0 temperature: 41c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 29 00 ba 
Build platform T0 temperature: 41c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 29 00 ba 
Build platform T0 temperature: 41c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 29 00 ba 
Build platform T0 temperature: 41c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 29 00 ba 
Build platform T0 temperature: 41c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 29 00 ba 
Build platform T0 temperature: 41c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 29 00 ba 
Build platform T0 temperature: 41c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 29 00 ba 
Build platform T0 temperature: 41c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 29 00 ba 
Build platform T0 temperature: 41c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 29 00 ba 
Build platform T0 temperature: 41c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 29 00 ba 
Build platform T0 temperature: 41c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 29 00 ba 
Build platform T0 temperature: 41c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 29 00 ba 
Build platform T0 temperature: 41c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 29 00 ba 
Build platform T0 temperature: 41c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 29 00 ba 
Build platform T0 temperature: 41c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 29 00 ba 
Build platform T0 temperature: 41c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 28 00 7e 
Build platform T0 temperature: 40c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 28 00 7e 
Build platform T0 temperature: 40c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 28 00 7e 
Build platform T0 temperature: 40c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 28 00 7e 
Build platform T0 temperature: 40c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 28 00 7e 
Build platform T0 temperature: 40c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 28 00 7e 
Build platform T0 temperature: 40c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 28 00 7e 
Build platform T0 temperature: 40c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 28 00 7e 
Build platform T0 temperature: 40c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 28 00 7e 
Build platform T0 temperature: 40c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 28 00 7e 
Build platform T0 temperature: 40c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 28 00 7e 
Build platform T0 temperature: 40c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 28 00 7e 
Build platform T0 temperature: 40c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 28 00 7e 
Build platform T0 temperature: 40c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 28 00 7e 
Build platform T0 temperature: 40c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 28 00 7e 
Build platform T0 temperature: 40c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 28 00 7e 
Build platform T0 temperature: 40c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 28 00 7e 
Build platform T0 temperature: 40c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 28 00 7e 
Build platform T0 temperature: 40c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 28 00 7e 
Build platform T0 temperature: 40c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 28 00 7e 
Build platform T0 temperature: 40c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 28 00 7e 
Build platform T0 temperature: 40c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 28 00 7e 
Build platform T0 temperature: 40c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 28 00 7e 
Build platform T0 temperature: 40c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 28 00 7e 
Build platform T0 temperature: 40c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 28 00 7e 
Build platform T0 temperature: 40c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 28 00 7e 
Build platform T0 temperature: 40c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 28 00 7e 
Build platform T0 temperature: 40c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 28 00 7e 
Build platform T0 temperature: 40c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 28 00 7e 
Build platform T0 temperature: 40c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 28 00 7e 
Build platform T0 temperature: 40c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 28 00 7e 
Build platform T0 temperature: 40c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 28 00 7e 
Build platform T0 temperature: 40c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 28 00 7e 
Build platform T0 temperature: 40c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 28 00 7e 
Build platform T0 temperature: 40c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 28 00 7e 
Build platform T0 temperature: 40c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 28 00 7e 
Build platform T0 temperature: 40c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 28 00 7e 
Build platform T0 temperature: 40c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 28 00 7e 
Build platform T0 temperature: 40c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 28 00 7e 
Build platform T0 temperature: 40c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 28 00 7e 
Build platform T0 temperature: 40c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 28 00 7e 
Build platform T0 temperature: 40c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 28 00 7e 
Build platform T0 temperature: 40c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 28 00 7e 
Build platform T0 temperature: 40c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 28 00 7e 
Build platform T0 temperature: 40c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 27 00 66 
Build platform T0 temperature: 39c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 27 00 66 
Build platform T0 temperature: 39c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 27 00 66 
Build platform T0 temperature: 39c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 27 00 66 
Build platform T0 temperature: 39c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 27 00 66 
Build platform T0 temperature: 39c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 27 00 66 
Build platform T0 temperature: 39c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 27 00 66 
Build platform T0 temperature: 39c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 27 00 66 
Build platform T0 temperature: 39c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1f 00 3d 
Extruder T0 temperature: 31c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 27 00 66 
Build platform T0 temperature: 39c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0
itio->waiting = 544
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 4
d5 01 0b 20 
port_handler read:
d5 d5 81 00 eb 
Printer is not ready
is_ready: 0
tio->waiting = 544 and rval = 0
owaiting in gpx_write_string
gcode_line: M105
port_handler write: 4
d5 01 18 5f 
port_handler read:
d5 d5 81 03 00 08 00 00 00 00 00 00 00 00 b5 
(line 0) Build status: build paused, 0 hours, 8 minutes
port_handler write: 7
d5 04 0a 00 02 00 8a 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T0 temperature: 30c
port_handler write: 7
d5 04 0a 00 20 00 da 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T0 target temperature: 0c
port_handler write: 7
d5 04 0a 01 02 00 21 
port_handler read:
d5 d5 81 1e 00 f9 
Extruder T1 temperature: 30c
port_handler write: 7
d5 04 0a 01 20 00 71 
port_handler read:
d5 d5 81 00 00 c9 
Extruder T1 target temperature: 0c
port_handler write: 7
d5 04 0a 00 1e 00 2b 
port_handler read:
d5 d5 81 27 00 66 
Build platform T0 temperature: 39c
port_handler write: 7
d5 04 0a 00 21 00 1e 
port_handler read:
d5 d5 81 00 00 c9 
Build platform T0 target temperature: 0c
gpx_write_string_core rval = 0
leaving gpx_write_string_core 544
gpx_return_translation rval = 0