2020-04-30 16:49:21,668 - Changing monitoring state from "Offline" to "Detecting serial port"
2020-04-30 16:49:21,697 - Serial port list: [u'/dev/ttyACM0']
2020-04-30 16:49:21,698 - Connecting to: /dev/ttyACM0
2020-04-30 16:49:21,711 - Changing monitoring state from "Detecting serial port" to "Opening serial port"
2020-04-30 16:49:21,719 - Connected to: Serial<id=0x6336f0d0, open=True>(port='/dev/ttyACM0', baudrate=250000, bytesize=8, parity='N', stopbits=1, timeout=10.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
2020-04-30 16:49:21,720 - Changing monitoring state from "Opening serial port" to "Connecting"
2020-04-30 16:49:21,733 - Send: N0 M110 N0*125
2020-04-30 16:49:21,735 - Recv: ok
2020-04-30 16:49:21,741 - Send: N0 M110 N0*125
2020-04-30 16:49:21,746 - Changing monitoring state from "Connecting" to "Operational"
2020-04-30 16:49:21,760 - Recv: ok
2020-04-30 16:49:21,763 - Send: N0 M110 N0*125
2020-04-30 16:49:21,774 - Recv: ok
2020-04-30 16:49:21,779 - Send: N1 M115*39
2020-04-30 16:49:21,784 - Recv: FIRMWARE_NAME:Smoothieware, FIRMWARE_URL:http%3A//smoothieware.org, X-SOURCE_CODE_URL:https://github.com/Smoothieware/Smoothieware, FIRMWARE_VERSION:edge-bdb141f, X-FIRMWARE_BUILD_DATE:Jan 12 2020 10:21:20, X-SYSTEM_CLOCK:120MHz, X-AXES:5, X-GRBL_MODE:0, X-CNC:0, X-MSD:1
2020-04-30 16:49:21,802 - Recv: ok
2020-04-30 16:49:26,725 - Send: M375.1
2020-04-30 16:49:26,745 - Recv: nan nan nan
2020-04-30 16:49:26,753 - Recv: nan nan nan
2020-04-30 16:49:26,760 - Recv: nan nan nan
2020-04-30 16:49:26,765 - Recv: ok
2020-04-30 16:49:26,770 - Send: M105
2020-04-30 16:49:26,775 - Recv: ok B:24.3 /0.0 @0 T0:24.6 /0.0 @0
2020-04-30 16:49:31,757 - Send: M105
2020-04-30 16:49:31,769 - Recv: ok B:24.3 /0.0 @0 T0:24.6 /0.0 @0
2020-04-30 16:49:32,619 - Send: M561
2020-04-30 16:49:32,630 - Recv: grid cleared and disabled
2020-04-30 16:49:32,647 - Recv: ok
2020-04-30 16:49:32,655 - Send: G90
2020-04-30 16:49:32,660 - Recv: ok
2020-04-30 16:49:32,664 - Send: M80
2020-04-30 16:49:32,666 - Recv: ok
2020-04-30 16:49:32,750 - Send: M280 S10.6
2020-04-30 16:49:32,761 - Recv: ok
2020-04-30 16:49:32,767 - Send: G4 P500
2020-04-30 16:49:33,270 - Recv: ok
2020-04-30 16:49:33,274 - Send: M80
2020-04-30 16:49:33,276 - Recv: ok
2020-04-30 16:49:33,279 - Send: M280 S7.0
2020-04-30 16:49:33,284 - Recv: ok
2020-04-30 16:49:33,287 - Send: G28 Z
2020-04-30 16:49:34,292 - Recv: ok
2020-04-30 16:49:34,298 - Send: G28 XY
2020-04-30 16:49:40,685 - Recv: ok
2020-04-30 16:49:40,699 - Send: M306 X-30
2020-04-30 16:49:40,710 - Recv: Homing Offset: X -30.000 Y 0.000 Z 0.000 will take effect next home
2020-04-30 16:49:40,715 - Recv: ok
2020-04-30 16:49:40,721 - Send: G28 X
2020-04-30 16:49:40,891 - Recv: ok
2020-04-30 16:49:40,897 - Send: G1 X0 Y0 F7200
2020-04-30 16:49:40,919 - Recv: ok
2020-04-30 16:49:40,925 - Send: G1 Z10 F500
2020-04-30 16:49:43,415 - Recv: ok
2020-04-30 16:49:43,436 - Send: M280 S3.0
2020-04-30 16:50:13,438 - Communication timeout while idle, trying to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
2020-04-30 16:50:13,456 - Send: G32
2020-04-30 16:50:18,689 - Recv: ok
2020-04-30 16:50:18,702 - Recv: Rectangular Grid Probe...
2020-04-30 16:50:18,707 - Send: G30 Z1.9 F100
2020-04-30 16:50:20,109 - Recv: Probe start ht: 5.000 mm, start MCS x,y: 0.000,0.000, rectangular bed width,height in mm: 240.000,290.000, grid size: 3x3
2020-04-30 16:50:21,824 - Recv: probe at 0,0 is -0.003 mm
2020-04-30 16:50:23,534 - Recv: DEBUG: X0.000, Y0.000, Z0.014
2020-04-30 16:50:26,278 - Recv: DEBUG: X120.000, Y0.000, Z0.044
2020-04-30 16:50:29,013 - Recv: DEBUG: X240.000, Y0.000, Z0.071
2020-04-30 16:50:31,957 - Recv: DEBUG: X240.000, Y145.000, Z0.071
2020-04-30 16:50:34,701 - Recv: DEBUG: X120.000, Y145.000, Z0.043
2020-04-30 16:50:37,473 - Recv: DEBUG: X0.000, Y145.000, Z-0.040
2020-04-30 16:50:40,460 - Recv: DEBUG: X0.000, Y290.000, Z-0.069
2020-04-30 16:50:43,210 - Recv: DEBUG: X120.000, Y290.000, Z0.024
2020-04-30 16:50:45,930 - Recv: DEBUG: X240.000, Y290.000, Z0.119
2020-04-30 16:50:45,937 - Recv: 0.0137 0.0437 0.0709
2020-04-30 16:50:45,940 - Recv: -0.0397 0.0431 0.0712
2020-04-30 16:50:45,945 - Recv: -0.0688 0.0241 0.1187
2020-04-30 16:50:45,962 - Recv: Maximum delta: 0.119
2020-04-30 16:50:45,967 - Recv: Probe completed. Enter M374 to save this grid
2020-04-30 16:50:45,971 - Recv: ok
2020-04-30 16:50:45,977 - Send: G1 Z10 F500
2020-04-30 16:50:48,878 - Recv: Z:4.8825
2020-04-30 16:50:48,893 - Recv: ok
2020-04-30 16:50:48,902 - Recv: ok
2020-04-30 16:50:48,905 - Send: G1 X-30 F7200
2020-04-30 16:50:48,911 - Send: G28 X
2020-04-30 16:50:48,926 - Recv: ok
2020-04-30 16:50:48,932 - Send: M306 X0
2020-04-30 16:50:52,169 - Recv: ok
2020-04-30 16:50:52,174 - Recv: Homing Offset: X 0.000 Y 0.000 Z 0.000 will take effect next home
2020-04-30 16:50:52,192 - Send: G28 X
2020-04-30 16:50:52,194 - Recv: ok
2020-04-30 16:50:52,202 - Send: M280 S7.0
2020-04-30 16:50:52,369 - Recv: ok
2020-04-30 16:50:52,374 - Recv: ok
2020-04-30 16:50:52,380 - Send: M105
2020-04-30 16:50:52,383 - Recv: ok B:24.2 /0.0 @0 T0:24.6 /0.0 @0
2020-04-30 16:50:56,774 - Send: M105
2020-04-30 16:50:56,788 - Recv: ok B:24.2 /0.0 @0 T0:24.5 /0.0 @0
2020-04-30 16:50:58,027 - Send: M375.1
2020-04-30 16:50:58,037 - Recv: 0.0137 0.0437 0.0709
2020-04-30 16:50:58,065 - Recv: -0.0397 0.0431 0.0712
2020-04-30 16:50:58,069 - Recv: -0.0688 0.0241 0.1187
2020-04-30 16:50:58,075 - Recv: ok
2020-04-30 16:51:00,509 - Send: M81
2020-04-30 16:51:00,524 - Recv: ok
2020-04-30 16:51:01,775 - Send: M105
2020-04-30 16:51:01,779 - Recv: ok B:24.2 /0.0 @0 T0:24.6 /0.0 @0
2020-04-30 16:51:06,777 - Send: M105
2020-04-30 16:51:06,793 - Recv: ok B:24.2 /0.0 @0 T0:24.6 /0.0 @0
2020-04-30 16:51:09,507 - Disabling serial logging