2021-06-13 17:27:49,190 - Changing monitoring state from "Offline" to "Detecting serial connection" 2021-06-13 17:27:49,238 - Performing autodetection with 7 port/baudrate candidates: /dev/ttyACM0@115200, /dev/ttyACM0@250000, /dev/ttyACM0@230400, /dev/ttyACM0@57600, /dev/ttyACM0@38400, /dev/ttyACM0@19200, /dev/ttyACM0@9600 2021-06-13 17:27:49,239 - Trying port /dev/ttyACM0, baudrate 115200 2021-06-13 17:27:49,240 - Connecting to port /dev/ttyACM0, baudrate 115200 2021-06-13 17:27:49,291 - Handshake attempt #1 with timeout 6.0s 2021-06-13 17:27:49,323 - Connected to: Serial(port='/dev/ttyACM0', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=6.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor 2021-06-13 17:27:49,324 - Send: N0 M110 N0*125 2021-06-13 17:27:50,976 - Recv: echo:SD init fail 2021-06-13 17:27:50,983 - Recv: ***Initing card fail*** 2021-06-13 17:27:54,264 - Recv: ===Initing RTS has finished=== 2021-06-13 17:27:54,306 - Recv: ok 2021-06-13 17:27:54,309 - Changing monitoring state from "Detecting serial connection" to "Operational" 2021-06-13 17:27:54,327 - Send: N0 M110 N0*125 2021-06-13 17:27:54,379 - Recv: ok 2021-06-13 17:27:54,382 - Send: N1 M115*39 2021-06-13 17:27:54,390 - Recv: FIRMWARE_NAME:Marlin BIGBREETECH SOURCE_CODE_URL:https://github.com/MarlinFirmware/Marlin PROTOCOL_VERSION:1.0 MACHINE_TYPE:CR-6 SE EXTRUDER_COUNT:1 UUID:cede2a2f-41a2-4748-9b12-c55c62f367ff 2021-06-13 17:27:54,392 - Recv: Cap:SERIAL_XON_XOFF:0 2021-06-13 17:27:54,397 - Recv: Cap:BINARY_FILE_TRANSFER:0 2021-06-13 17:27:54,398 - Recv: Cap:EEPROM:1 2021-06-13 17:27:54,406 - Recv: Cap:VOLUMETRIC:1 2021-06-13 17:27:54,407 - Recv: Cap:AUTOREPORT_TEMP:1 2021-06-13 17:27:54,413 - Recv: Cap:PROGRESS:0 2021-06-13 17:27:54,416 - Recv: Cap:PRINT_JOB:1 2021-06-13 17:27:54,418 - Recv: Cap:AUTOLEVEL:1 2021-06-13 17:27:54,423 - Recv: Cap:Z_PROBE:1 2021-06-13 17:27:54,427 - Recv: Cap:LEVELING_DATA:1 2021-06-13 17:27:54,428 - Recv: Cap:BUILD_PERCENT:0 2021-06-13 17:27:54,430 - Recv: Cap:SOFTWARE_POWER:0 2021-06-13 17:27:54,431 - Recv: Cap:TOGGLE_LIGHTS:0 2021-06-13 17:27:54,433 - Recv: Cap:CASE_LIGHT_BRIGHTNESS:0 2021-06-13 17:27:54,434 - Recv: Cap:EMERGENCY_PARSER:0 2021-06-13 17:27:54,436 - Recv: Cap:PROMPT_SUPPORT:0 2021-06-13 17:27:54,437 - Recv: Cap:AUTOREPORT_SD_STATUS:0 2021-06-13 17:27:54,438 - Recv: Cap:THERMAL_PROTECTION:1 2021-06-13 17:27:54,440 - Recv: Cap:MOTION_MODES:0 2021-06-13 17:27:54,441 - Recv: Cap:CHAMBER_TEMPERATURE:0 2021-06-13 17:27:54,442 - Recv: ok 2021-06-13 17:27:54,444 - Send: M21 2021-06-13 17:27:56,645 - Recv: echo:SD init fail 2021-06-13 17:27:56,648 - Recv: ok 2021-06-13 17:27:56,653 - Send: M851 2021-06-13 17:27:56,658 - Recv: Probe Offset X0.00 Y0.00 Z0.20 2021-06-13 17:27:56,664 - Recv: ok 2021-06-13 17:27:56,667 - Send: M155 S3 2021-06-13 17:27:56,679 - Recv: ok 2021-06-13 17:27:59,684 - Recv: TT::20.6220.62 //0.000.00 BB::20.6220.62 //0.000.00 @@::00 BB@@::00 2021-06-13 17:27:59,687 - Recv: 2021-06-13 17:28:02,684 - Recv: TT::20.6220.62 //0.000.00 BB::20.6220.62 //0.000.00 @@::00 BB@@::00 2021-06-13 17:28:02,686 - Recv: 2021-06-13 17:28:05,684 - Recv: TT::20.6220.62 //0.000.00 BB::20.6220.62 //0.000.00 @@::00 BB@@::00 2021-06-13 17:28:05,686 - Recv: 2021-06-13 17:28:08,685 - Recv: TT::20.6220.62 //0.000.00 BB::20.6220.62 //0.000.00 @@::00 BB@@::00 2021-06-13 17:28:08,687 - Recv: 2021-06-13 17:28:11,684 - Recv: TT::20.6220.62 //0.000.00 BB::20.6220.62 //0.000.00 @@::00 BB@@::00 2021-06-13 17:28:11,687 - Recv: 2021-06-13 17:28:14,684 - Recv: TT::20.6220.62 //0.000.00 BB::20.6220.62 //0.000.00 @@::00 BB@@::00 2021-06-13 17:28:14,686 - Recv: 2021-06-13 17:28:17,684 - Recv: TT::20.6220.62 //0.000.00 BB::20.6220.62 //0.000.00 @@::00 BB@@::00 2021-06-13 17:28:17,686 - Recv: 2021-06-13 17:28:20,684 - Recv: TT::20.6220.62 //0.000.00 BB::20.6220.62 //0.000.00 @@::00 BB@@::00 2021-06-13 17:28:20,686 - Recv: 2021-06-13 17:28:23,684 - Recv: TT::20.6220.62 //0.000.00 BB::20.6220.62 //0.000.00 @@::00 BB@@::00 2021-06-13 17:28:23,686 - Recv: 2021-06-13 17:28:24,501 - Send: G91 2021-06-13 17:28:24,509 - Recv: ok 2021-06-13 17:28:24,523 - Send: G1 Z-10 F200 2021-06-13 17:28:24,534 - Recv: ok 2021-06-13 17:28:24,536 - Send: G90 2021-06-13 17:28:24,541 - Recv: ok 2021-06-13 17:28:45,971 - Send: G91 2021-06-13 17:28:54,574 - Communication timeout while idle, trying to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves. 2021-06-13 17:28:54,580 - Send: G1 Z-10 F200 2021-06-13 17:29:00,582 - Communication timeout while idle, trying to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves. 2021-06-13 17:29:00,587 - Send: G90 2021-06-13 17:29:06,590 - Communication timeout while idle, trying to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves. 2021-06-13 17:29:18,605 - No response from printer after 5 consecutive communication timeouts, considering it dead. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves. 2021-06-13 17:29:18,620 - Changing monitoring state from "Operational" to "Offline after error" 2021-06-13 17:29:18,623 - Connection closed, closing down monitor