2020-03-07 13:19:03,219 - Changing monitoring state from "Offline" to "Detecting serial port"
2020-03-07 13:19:03,302 - Serial port list: [u'/dev/ttyUSB0']
2020-03-07 13:19:03,304 - Connecting to: /dev/ttyUSB0
2020-03-07 13:19:03,345 - Changing monitoring state from "Detecting serial port" to "Opening serial port"
2020-03-07 13:19:03,359 - Connected to: Serial<id=0x70ea2750, open=True>(port='/dev/ttyUSB0', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=10.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
2020-03-07 13:19:03,365 - Starting baud rate detection...
2020-03-07 13:19:03,373 - Changing monitoring state from "Opening serial port" to "Detecting baudrate"
2020-03-07 13:19:04,482 - Trying baudrate: 115200
2020-03-07 13:19:04,490 - Send: N0 M110 N0*125
2020-03-07 13:19:04,496 - Recv: start
2020-03-07 13:19:04,500 - Changing monitoring state from "Detecting baudrate" to "Operational"
2020-03-07 13:19:04,522 - Send: N0 M110 N0*125
2020-03-07 13:19:04,525 - Recv: echo:Marlin bugfix-2.0.x
2020-03-07 13:19:04,531 - Recv: 
2020-03-07 13:19:04,533 - Recv: echo: Last Updated: 2020-01-23 | Author: (KWG, BLTouch_v1)
2020-03-07 13:19:04,543 - Recv: echo:Compiled: Feb 11 2020
2020-03-07 13:19:04,553 - Recv: echo: Free Memory: 2144  PlannerBufferBytes: 1632
2020-03-07 13:19:07,190 - Recv: echo:SD card ok
2020-03-07 13:19:07,211 - Recv: echo:V75 stored settings retrieved (687 bytes; crc 42420)
2020-03-07 13:19:07,438 - Recv: echo:  G21    ; Units in mm (mm)
2020-03-07 13:19:07,449 - Recv: echo:  M149 C ; Units in Celsius
2020-03-07 13:19:07,460 - Recv: 
2020-03-07 13:19:07,465 - Recv: echo:Filament settings: Disabled
2020-03-07 13:19:07,476 - Recv: echo:  M200 D1.75
2020-03-07 13:19:07,487 - Recv: echo:  M200 D0
2020-03-07 13:19:07,498 - Recv: echo:Steps per unit:
2020-03-07 13:19:07,509 - Recv: echo: M92 X80.00 Y80.00 Z400.00 E414.51
2020-03-07 13:19:07,519 - Recv: echo:Maximum feedrates (units/s):
2020-03-07 13:19:07,530 - Recv: echo:  M203 X200.00 Y200.00 Z5.00 E25.00
2020-03-07 13:19:07,539 - Recv: echo:Maximum Acceleration (units/s2):
2020-03-07 13:19:07,559 - Recv: echo:  M201 X1200.00 Y1200.00 Z100.00 E10000.00
2020-03-07 13:19:07,571 - Recv: echo:Acceleration (units/s2): P<print_accel> R<retract_accel> T<travel_accel>
2020-03-07 13:19:07,580 - Recv: echo:  M204 P800.00 R3000.00 T800.00
2020-03-07 13:19:07,589 - Recv: echo:Advanced: B<min_segment_time_us> S<min_feedrate> T<min_travel_feedrate> X<max_x_jerk> Y<max_y_jerk> Z<max_z_jerk> E<max_e_jerk>
2020-03-07 13:19:07,595 - Recv: echo:  M205 B20000.00 S0.00 T0.00 X10.00 Y10.00 Z0.40 E5.00
2020-03-07 13:19:07,599 - Recv: echo:Home offset:
2020-03-07 13:19:07,612 - Recv: echo:  M206 X0.00 Y0.00 Z0.00
2020-03-07 13:19:07,618 - Recv: echo:Auto Bed Leveling:
2020-03-07 13:19:07,623 - Recv: echo:  M420 S0 Z0.00
2020-03-07 13:19:07,629 - Recv: echo:  G29 W I0 J0 Z0.68350
2020-03-07 13:19:07,636 - Recv: echo:  G29 W I1 J0 Z0.43800
2020-03-07 13:19:07,644 - Recv: echo:  G29 W I2 J0 Z0.36600
2020-03-07 13:19:07,649 - Recv: echo:  G29 W I3 J0 Z0.38650
2020-03-07 13:19:07,656 - Recv: echo:  G29 W I4 J0 Z0.56850
2020-03-07 13:19:07,662 - Recv: echo:  G29 W I0 J1 Z0.78150
2020-03-07 13:19:07,668 - Recv: echo:  G29 W I1 J1 Z0.43950
2020-03-07 13:19:07,674 - Recv: echo:  G29 W I2 J1 Z0.23300
2020-03-07 13:19:07,681 - Recv: echo:  G29 W I3 J1 Z0.20400
2020-03-07 13:19:07,685 - Recv: echo:  G29 W I4 J1 Z0.28700
2020-03-07 13:19:07,691 - Recv: echo:  G29 W I0 J2 Z0.79900
2020-03-07 13:19:07,696 - Recv: echo:  G29 W I1 J2 Z0.37250
2020-03-07 13:19:07,706 - Recv: echo:  G29 W I2 J2 Z0.13450
2020-03-07 13:19:07,713 - Recv: echo:  G29 W I3 J2 Z0.01250
2020-03-07 13:19:07,719 - Recv: echo:  G29 W I4 J2 Z0.04100
2020-03-07 13:19:07,724 - Recv: echo:  G29 W I0 J3 Z0.77350
2020-03-07 13:19:07,730 - Recv: echo:  G29 W I1 J3 Z0.31700
2020-03-07 13:19:07,736 - Recv: echo:  G29 W I2 J3 Z0.00500
2020-03-07 13:19:07,742 - Recv: echo:  G29 W I3 J3 Z-0.14350
2020-03-07 13:19:07,747 - Recv: echo:  G29 W I4 J3 Z-0.15850
2020-03-07 13:19:07,752 - Recv: echo:  G29 W I0 J4 Z0.75150
2020-03-07 13:19:07,759 - Recv: echo:  G29 W I1 J4 Z0.29250
2020-03-07 13:19:07,765 - Recv: echo:  G29 W I2 J4 Z-0.03850
2020-03-07 13:19:07,770 - Recv: echo:  G29 W I3 J4 Z-0.21850
2020-03-07 13:19:07,775 - Recv: echo:  G29 W I4 J4 Z-0.26500
2020-03-07 13:19:07,782 - Recv: echo:Material heatup parameters:
2020-03-07 13:19:07,787 - Recv: echo:  M145 S0 H210 B60 F0
2020-03-07 13:19:07,792 - Recv: echo:  M145 S1 H240 B110 F0
2020-03-07 13:19:07,797 - Recv: echo:PID settings:
2020-03-07 13:19:07,803 - Recv: echo:  M301 P17.22 I0.89 D83.25
2020-03-07 13:19:07,808 - Recv: echo:Z-Probe Offset (mm):
2020-03-07 13:19:07,813 - Recv: echo:  M851 X34.00 Y5.00 Z-0.60
2020-03-07 13:19:07,818 - Recv: echo:Linear Advance:
2020-03-07 13:19:07,823 - Recv: echo:  M900 K2.00
2020-03-07 13:19:09,760 - Recv: echo:SD card ok
2020-03-07 13:19:09,936 - Recv: ok
2020-03-07 13:19:09,941 - Send: N1 M115*39
2020-03-07 13:19:09,952 - Recv: ok
2020-03-07 13:19:09,960 - Send: N2 M21*18
2020-03-07 13:19:09,997 - Recv: FIRMWARE_NAME:Marlin bugfix-2.0.x (GitHub) SOURCE_CODE_URL:https://github.com/MarlinFirmware/Marlin PROTOCOL_VERSION:1.0 MACHINE_TYPE:3D Printer EXTRUDER_COUNT:1 UUID:cede2a2f-41a2-4748-9b12-c55c62f367ff
2020-03-07 13:19:10,031 - Recv: Cap:SERIAL_XON_XOFF:0
2020-03-07 13:19:10,045 - Recv: Cap:BINARY_FILE_TRANSFER:0
2020-03-07 13:19:10,063 - Recv: Cap:EEPROM:1
2020-03-07 13:19:10,082 - Recv: Cap:VOLUMETRIC:1
2020-03-07 13:19:10,093 - Recv: Cap:AUTOREPORT_TEMP:1
2020-03-07 13:19:10,104 - Recv: Cap:PROGRESS:0
2020-03-07 13:19:10,109 - Recv: Cap:PRINT_JOB:1
2020-03-07 13:19:10,115 - Recv: Cap:AUTOLEVEL:1
2020-03-07 13:19:10,123 - Recv: Cap:Z_PROBE:1
2020-03-07 13:19:10,130 - Recv: Cap:LEVELING_DATA:1
2020-03-07 13:19:10,138 - Recv: Cap:BUILD_PERCENT:0
2020-03-07 13:19:10,144 - Recv: Cap:SOFTWARE_POWER:0
2020-03-07 13:19:10,150 - Recv: Cap:TOGGLE_LIGHTS:0
2020-03-07 13:19:10,155 - Recv: Cap:CASE_LIGHT_BRIGHTNESS:0
2020-03-07 13:19:10,161 - Recv: Cap:EMERGENCY_PARSER:0
2020-03-07 13:19:10,166 - Recv: Cap:PROMPT_SUPPORT:0
2020-03-07 13:19:10,171 - Recv: Cap:AUTOREPORT_SD_STATUS:0
2020-03-07 13:19:10,177 - Recv: Cap:THERMAL_PROTECTION:1
2020-03-07 13:19:10,182 - Recv: Cap:MOTION_MODES:0
2020-03-07 13:19:10,187 - Recv: Cap:CHAMBER_TEMPERATURE:0
2020-03-07 13:19:10,195 - Recv: ok
2020-03-07 13:19:10,198 - Send: M20
2020-03-07 13:19:10,203 - Recv: echo:SD card ok
2020-03-07 13:19:10,210 - Recv: ok
2020-03-07 13:19:10,214 - Send: M117 0% L=-/-
2020-03-07 13:19:10,221 - Recv: Begin file list
2020-03-07 13:19:10,406 - Recv: End file list
2020-03-07 13:19:10,409 - Recv: ok
2020-03-07 13:19:10,416 - Recv: ok
2020-03-07 13:19:10,422 - Send: M420V1
2020-03-07 13:19:10,469 - Recv: Bilinear Leveling Grid:
2020-03-07 13:19:10,474 - Recv:       0      1      2      3      4
2020-03-07 13:19:10,493 - Recv:  0 +0.684 +0.438 +0.366 +0.386 +0.568
2020-03-07 13:19:10,499 - Recv:  1 +0.782 +0.440 +0.233 +0.204 +0.287
2020-03-07 13:19:10,502 - Recv:  2 +0.799 +0.372 +0.134 +0.012 +0.041
2020-03-07 13:19:10,504 - Recv:  3 +0.773 +0.317 +0.005 -0.144 -0.159
2020-03-07 13:19:10,507 - Recv:  4 +0.751 +0.293 -0.039 -0.219 -0.265
2020-03-07 13:19:10,515 - Recv: 
2020-03-07 13:19:10,517 - Recv: Subdivided with CATMULL ROM Leveling Grid:
2020-03-07 13:19:10,520 - Recv:         0        1        2        3        4        5        6        7        8        9       10       11       12
2020-03-07 13:19:10,528 - Recv:  0 +0.68350 +0.59524 +0.50698 +0.43800 +0.39772 +0.37672 +0.36600 +0.36000 +0.36428 +0.38650 +0.43520 +0.50185 +0.56850
2020-03-07 13:19:10,531 - Recv:  1 +0.71915 +0.62061 +0.52208 +0.44104 +0.38448 +0.34542 +0.32039 +0.30766 +0.30895 +0.32600 +0.36462 +0.41898 +0.47335
2020-03-07 13:19:10,537 - Recv:  2 +0.75480 +0.64598 +0.53717 +0.44407 +0.37124 +0.31412 +0.27478 +0.25531 +0.25363 +0.26550 +0.29403 +0.33612 +0.37820
2020-03-07 13:19:10,540 - Recv:  3 +0.78150 +0.66248 +0.54346 +0.43950 +0.35406 +0.28367 +0.23300 +0.20604 +0.19880 +0.20400 +0.22337 +0.25519 +0.28700
2020-03-07 13:19:10,552 - Recv:  4 +0.79489 +0.66497 +0.53506 +0.42181 +0.33028 +0.25542 +0.19876 +0.16242 +0.14428 +0.13952 +0.15098 +0.17581 +0.20065
2020-03-07 13:19:10,554 - Recv:  5 +0.79933 +0.65859 +0.51785 +0.39652 +0.30257 +0.22802 +0.16835 +0.12187 +0.09026 +0.07404 +0.07851 +0.09838 +0.11824
2020-03-07 13:19:10,557 - Recv:  6 +0.79900 +0.64985 +0.50070 +0.37250 +0.27491 +0.19826 +0.13450 +0.07967 +0.03772 +0.01250 +0.01085 +0.02593 +0.04100
2020-03-07 13:19:10,560 - Recv:  7 +0.79356 +0.63970 +0.48585 +0.35200 +0.24682 +0.16163 +0.09044 +0.03043 -0.01559 -0.04513 -0.05187 -0.04213 -0.03239
2020-03-07 13:19:10,603 - Recv:  8 +0.78333 +0.62720 +0.47106 +0.33278 +0.21878 +0.12263 +0.04294 -0.02046 -0.06741 -0.09881 -0.10978 -0.10520 -0.10061
2020-03-07 13:19:10,607 - Recv:  9 +0.77350 +0.61598 +0.45846 +0.31700 +0.19624 +0.09154 +0.00500 -0.06156 -0.10994 -0.14350 -0.15839 -0.15844 -0.15850
2020-03-07 13:19:10,610 - Recv: 10 +0.76591 +0.60771 +0.44952 +0.30654 +0.18286 +0.07439 -0.01587 -0.08578 -0.13748 -0.17450 -0.19309 -0.19699 -0.20089
2020-03-07 13:19:10,612 - Recv: 11 +0.75870 +0.60074 +0.44277 +0.29952 +0.17497 +0.06515 -0.02719 -0.10020 -0.15573 -0.19650 -0.21849 -0.22572 -0.23294
2020-03-07 13:19:10,614 - Recv: 12 +0.75150 +0.59376 +0.43602 +0.29250 +0.16709 +0.05591 -0.03850 -0.11463 -0.17398 -0.21850 -0.24389 -0.25444 -0.26500
2020-03-07 13:19:10,617 - Recv: 
2020-03-07 13:19:10,618 - Recv: echo:Bed Leveling OFF
2020-03-07 13:19:10,623 - Recv: echo:Fade Height OFF
2020-03-07 13:19:10,629 - Recv: ok
2020-03-07 13:19:10,641 - Send: M851
2020-03-07 13:19:10,658 - Recv: Probe Offset X34.00 Y5.00 Z-0.60
2020-03-07 13:19:10,661 - Recv: ok
2020-03-07 13:19:10,664 - Send: M155 S2
2020-03-07 13:19:10,673 - Recv: ok
2020-03-07 13:19:10,733 - Connection closed, closing down monitor
2020-03-07 13:19:10,739 - Changing monitoring state from "Operational" to "Offline"
2020-03-07 13:19:10,909 - Changing monitoring state from "Offline" to "Detecting serial port"
2020-03-07 13:19:11,157 - Serial port list: [u'/dev/ttyUSB0']
2020-03-07 13:19:11,157 - Connecting to: /dev/ttyUSB0
2020-03-07 13:19:11,246 - Changing monitoring state from "Detecting serial port" to "Opening serial port"
2020-03-07 13:19:11,252 - Connected to: Serial<id=0x6cf79f70, open=True>(port='/dev/ttyUSB0', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=10.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
2020-03-07 13:19:11,253 - Starting baud rate detection...
2020-03-07 13:19:11,253 - Changing monitoring state from "Opening serial port" to "Detecting baudrate"
2020-03-07 13:19:12,261 - Trying baudrate: 115200
2020-03-07 13:19:12,270 - Send: N0 M110 N0*125
2020-03-07 13:19:12,287 - Recv: start
2020-03-07 13:19:12,292 - Changing monitoring state from "Detecting baudrate" to "Operational"
2020-03-07 13:19:12,313 - Send: N0 M110 N0*125
2020-03-07 13:19:12,313 - Recv: echo:Marlin bugfix-2.0.x
2020-03-07 13:19:12,323 - Recv: 
2020-03-07 13:19:12,326 - Recv: echo: Last Updated: 2020-01-23 | Author: (KWG, BLTouch_v1)
2020-03-07 13:19:12,334 - Recv: echo:Compiled: Feb 11 2020
2020-03-07 13:19:12,348 - Recv: echo: Free Memory: 2144  PlannerBufferBytes: 1632
2020-03-07 13:19:13,526 - Unexpected error while reading serial port, please consult octoprint.log for details: SerialException: 'device reports readiness to read but returned no data (device disconnected or multiple access on port?)' @ comm.py:_readline:2823
2020-03-07 13:19:13,527 - Please see https://faq.octoprint.org/serialerror for possible reasons of this.
2020-03-07 13:19:13,543 - Changing monitoring state from "Operational" to "Offline (Error: SerialException: 'device reports readiness to read but returned no data (device disconnected or multiple access on port?)' @ comm.py:_readline:2823)"
2020-03-07 13:19:13,553 - Connection closed, closing down monitor
2020-03-07 13:20:50,438 - Changing monitoring state from "Offline" to "Detecting serial port"
2020-03-07 13:20:50,470 - Serial port list: [u'/dev/ttyUSB0']
2020-03-07 13:20:50,471 - Connecting to: /dev/ttyUSB0
2020-03-07 13:20:50,481 - Changing monitoring state from "Detecting serial port" to "Opening serial port"
2020-03-07 13:20:50,485 - Connected to: Serial<id=0x70ede250, open=True>(port='/dev/ttyUSB0', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=10.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
2020-03-07 13:20:50,486 - Starting baud rate detection...
2020-03-07 13:20:50,488 - Changing monitoring state from "Opening serial port" to "Detecting baudrate"
2020-03-07 13:20:51,495 - Trying baudrate: 115200
2020-03-07 13:20:51,512 - Send: N0 M110 N0*125
2020-03-07 13:20:51,590 - Recv: start
2020-03-07 13:20:51,594 - Changing monitoring state from "Detecting baudrate" to "Operational"
2020-03-07 13:20:51,608 - Recv: echo:Marlin bugfix-2.0.x
2020-03-07 13:20:51,623 - Send: N0 M110 N0*125
2020-03-07 13:20:51,634 - Recv: 
2020-03-07 13:20:51,636 - Recv: echo: Last Updated: 2020-01-23 | Author: (KWG, BLTouch_v1)
2020-03-07 13:20:51,643 - Recv: echo:Compiled: Feb 11 2020
2020-03-07 13:20:51,649 - Recv: echo: Free Memory: 2144  PlannerBufferBytes: 1632
2020-03-07 13:20:54,355 - Recv: echo:SD card ok
2020-03-07 13:20:54,371 - Recv: echo:V75 stored settings retrieved (687 bytes; crc 42420)
2020-03-07 13:20:54,607 - Recv: echo:  G21    ; Units in mm (mm)
2020-03-07 13:20:54,612 - Recv: echo:  M149 C ; Units in Celsius
2020-03-07 13:20:54,618 - Recv: 
2020-03-07 13:20:54,620 - Recv: echo:Filament settings: Disabled
2020-03-07 13:20:54,629 - Recv: echo:  M200 D1.75
2020-03-07 13:20:54,635 - Recv: echo:  M200 D0
2020-03-07 13:20:54,640 - Recv: echo:Steps per unit:
2020-03-07 13:20:54,647 - Recv: echo: M92 X80.00 Y80.00 Z400.00 E414.51
2020-03-07 13:20:54,653 - Recv: echo:Maximum feedrates (units/s):
2020-03-07 13:20:54,659 - Recv: echo:  M203 X200.00 Y200.00 Z5.00 E25.00
2020-03-07 13:20:54,665 - Recv: echo:Maximum Acceleration (units/s2):
2020-03-07 13:20:54,671 - Recv: echo:  M201 X1200.00 Y1200.00 Z100.00 E10000.00
2020-03-07 13:20:54,676 - Recv: echo:Acceleration (units/s2): P<print_accel> R<retract_accel> T<travel_accel>
2020-03-07 13:20:54,682 - Recv: echo:  M204 P800.00 R3000.00 T800.00
2020-03-07 13:20:54,688 - Recv: echo:Advanced: B<min_segment_time_us> S<min_feedrate> T<min_travel_feedrate> X<max_x_jerk> Y<max_y_jerk> Z<max_z_jerk> E<max_e_jerk>
2020-03-07 13:20:54,694 - Recv: echo:  M205 B20000.00 S0.00 T0.00 X10.00 Y10.00 Z0.40 E5.00
2020-03-07 13:20:54,699 - Recv: echo:Home offset:
2020-03-07 13:20:54,704 - Recv: echo:  M206 X0.00 Y0.00 Z0.00
2020-03-07 13:20:54,711 - Recv: echo:Auto Bed Leveling:
2020-03-07 13:20:54,717 - Recv: echo:  M420 S0 Z0.00
2020-03-07 13:20:54,727 - Recv: echo:  G29 W I0 J0 Z0.68350
2020-03-07 13:20:54,733 - Recv: echo:  G29 W I1 J0 Z0.43800
2020-03-07 13:20:54,739 - Recv: echo:  G29 W I2 J0 Z0.36600
2020-03-07 13:20:54,745 - Recv: echo:  G29 W I3 J0 Z0.38650
2020-03-07 13:20:54,752 - Recv: echo:  G29 W I4 J0 Z0.56850
2020-03-07 13:20:54,758 - Recv: echo:  G29 W I0 J1 Z0.78150
2020-03-07 13:20:54,764 - Recv: echo:  G29 W I1 J1 Z0.43950
2020-03-07 13:20:54,771 - Recv: echo:  G29 W I2 J1 Z0.23300
2020-03-07 13:20:54,775 - Recv: echo:  G29 W I3 J1 Z0.20400
2020-03-07 13:20:54,780 - Recv: echo:  G29 W I4 J1 Z0.28700
2020-03-07 13:20:54,785 - Recv: echo:  G29 W I0 J2 Z0.79900
2020-03-07 13:20:54,791 - Recv: echo:  G29 W I1 J2 Z0.37250
2020-03-07 13:20:54,797 - Recv: echo:  G29 W I2 J2 Z0.13450
2020-03-07 13:20:54,803 - Recv: echo:  G29 W I3 J2 Z0.01250
2020-03-07 13:20:54,809 - Recv: echo:  G29 W I4 J2 Z0.04100
2020-03-07 13:20:54,815 - Recv: echo:  G29 W I0 J3 Z0.77350
2020-03-07 13:20:54,824 - Recv: echo:  G29 W I1 J3 Z0.31700
2020-03-07 13:20:54,831 - Recv: echo:  G29 W I2 J3 Z0.00500
2020-03-07 13:20:54,843 - Recv: echo:  G29 W I3 J3 Z-0.14350
2020-03-07 13:20:54,858 - Recv: echo:  G29 W I4 J3 Z-0.15850
2020-03-07 13:20:54,871 - Recv: echo:  G29 W I0 J4 Z0.75150
2020-03-07 13:20:54,890 - Recv: echo:  G29 W I1 J4 Z0.29250
2020-03-07 13:20:54,899 - Recv: echo:  G29 W I2 J4 Z-0.03850
2020-03-07 13:20:54,910 - Recv: echo:  G29 W I3 J4 Z-0.21850
2020-03-07 13:20:54,921 - Recv: echo:  G29 W I4 J4 Z-0.26500
2020-03-07 13:20:54,933 - Recv: echo:Material heatup parameters:
2020-03-07 13:20:54,939 - Recv: echo:  M145 S0 H210 B60 F0
2020-03-07 13:20:54,945 - Recv: echo:  M145 S1 H240 B110 F0
2020-03-07 13:20:54,951 - Recv: echo:PID settings:
2020-03-07 13:20:54,958 - Recv: echo:  M301 P17.22 I0.89 D83.25
2020-03-07 13:20:54,963 - Recv: echo:Z-Probe Offset (mm):
2020-03-07 13:20:54,968 - Recv: echo:  M851 X34.00 Y5.00 Z-0.60
2020-03-07 13:20:54,976 - Recv: echo:Linear Advance:
2020-03-07 13:20:54,982 - Recv: echo:  M900 K2.00
2020-03-07 13:20:56,923 - Recv: echo:SD card ok
2020-03-07 13:20:57,099 - Recv: ok
2020-03-07 13:20:57,104 - Send: N1 M115*39
2020-03-07 13:20:57,164 - Recv: FIRMWARE_NAME:Marlin bugfix-2.0.x (GitHub) SOURCE_CODE_URL:https://github.com/MarlinFirmware/Marlin PROTOCOL_VERSION:1.0 MACHINE_TYPE:3D Printer EXTRUDER_COUNT:1 UUID:cede2a2f-41a2-4748-9b12-c55c62f367ff
2020-03-07 13:20:57,179 - Recv: Cap:SERIAL_XON_XOFF:0
2020-03-07 13:20:57,191 - Recv: Cap:BINARY_FILE_TRANSFER:0
2020-03-07 13:20:57,197 - Recv: Cap:EEPROM:1
2020-03-07 13:20:57,208 - Recv: Cap:VOLUMETRIC:1
2020-03-07 13:20:57,224 - Recv: Cap:AUTOREPORT_TEMP:1
2020-03-07 13:20:57,234 - Recv: Cap:PROGRESS:0
2020-03-07 13:20:57,240 - Recv: Cap:PRINT_JOB:1
2020-03-07 13:20:57,247 - Recv: Cap:AUTOLEVEL:1
2020-03-07 13:20:57,254 - Recv: Cap:Z_PROBE:1
2020-03-07 13:20:57,263 - Recv: Cap:LEVELING_DATA:1
2020-03-07 13:20:57,271 - Recv: Cap:BUILD_PERCENT:0
2020-03-07 13:20:57,277 - Recv: Cap:SOFTWARE_POWER:0
2020-03-07 13:20:57,283 - Recv: Cap:TOGGLE_LIGHTS:0
2020-03-07 13:20:57,288 - Recv: Cap:CASE_LIGHT_BRIGHTNESS:0
2020-03-07 13:20:57,294 - Recv: Cap:EMERGENCY_PARSER:0
2020-03-07 13:20:57,299 - Recv: Cap:PROMPT_SUPPORT:0
2020-03-07 13:20:57,305 - Recv: Cap:AUTOREPORT_SD_STATUS:0
2020-03-07 13:20:57,314 - Recv: Cap:THERMAL_PROTECTION:1
2020-03-07 13:20:57,321 - Recv: Cap:MOTION_MODES:0
2020-03-07 13:20:57,327 - Recv: Cap:CHAMBER_TEMPERATURE:0
2020-03-07 13:20:57,332 - Recv: ok
2020-03-07 13:20:57,336 - Send: M21
2020-03-07 13:20:57,366 - Recv: echo:SD card ok
2020-03-07 13:20:57,377 - Recv: ok
2020-03-07 13:20:57,383 - Send: M20
2020-03-07 13:20:57,397 - Recv: Begin file list
2020-03-07 13:20:57,589 - Recv: End file list
2020-03-07 13:20:57,593 - Recv: ok
2020-03-07 13:20:57,604 - Send: M105
2020-03-07 13:20:57,637 - Recv: ok T:31.67 /0.00 B:33.80 /0.00 @:0 B@:0
2020-03-07 13:20:57,647 - Send: M420V1
2020-03-07 13:20:57,653 - Recv: Bilinear Leveling Grid:
2020-03-07 13:20:57,695 - Recv:       0      1      2      3      4
2020-03-07 13:20:57,699 - Recv:  0 +0.684 +0.438 +0.366 +0.386 +0.568
2020-03-07 13:20:57,703 - Recv:  1 +0.782 +0.440 +0.233 +0.204 +0.287
2020-03-07 13:20:57,704 - Recv:  2 +0.799 +0.372 +0.134 +0.012 +0.041
2020-03-07 13:20:57,706 - Recv:  3 +0.773 +0.317 +0.005 -0.144 -0.159
2020-03-07 13:20:57,708 - Recv:  4 +0.751 +0.293 -0.039 -0.219 -0.265
2020-03-07 13:20:57,712 - Recv: 
2020-03-07 13:20:57,714 - Recv: Subdivided with CATMULL ROM Leveling Grid:
2020-03-07 13:20:57,716 - Recv:         0        1        2        3        4        5        6        7        8        9       10       11       12
2020-03-07 13:20:57,723 - Recv:  0 +0.68350 +0.59524 +0.50698 +0.43800 +0.39772 +0.37672 +0.36600 +0.36000 +0.36428 +0.38650 +0.43520 +0.50185 +0.56850
2020-03-07 13:20:57,737 - Recv:  1 +0.71915 +0.62061 +0.52208 +0.44104 +0.38448 +0.34542 +0.32039 +0.30766 +0.30895 +0.32600 +0.36462 +0.41898 +0.47335
2020-03-07 13:20:57,740 - Recv:  2 +0.75480 +0.64598 +0.53717 +0.44407 +0.37124 +0.31412 +0.27478 +0.25531 +0.25363 +0.26550 +0.29403 +0.33612 +0.37820
2020-03-07 13:20:57,742 - Recv:  3 +0.78150 +0.66248 +0.54346 +0.43950 +0.35406 +0.28367 +0.23300 +0.20604 +0.19880 +0.20400 +0.22337 +0.25519 +0.28700
2020-03-07 13:20:57,744 - Recv:  4 +0.79489 +0.66497 +0.53506 +0.42181 +0.33028 +0.25542 +0.19876 +0.16242 +0.14428 +0.13952 +0.15098 +0.17581 +0.20065
2020-03-07 13:20:57,780 - Recv:  5 +0.79933 +0.65859 +0.51785 +0.39652 +0.30257 +0.22802 +0.16835 +0.12187 +0.09026 +0.07404 +0.07851 +0.09838 +0.11824
2020-03-07 13:20:57,782 - Recv:  6 +0.79900 +0.64985 +0.50070 +0.37250 +0.27491 +0.19826 +0.13450 +0.07967 +0.03772 +0.01250 +0.01085 +0.02593 +0.04100
2020-03-07 13:20:57,784 - Recv:  7 +0.79356 +0.63970 +0.48585 +0.35200 +0.24682 +0.16163 +0.09044 +0.03043 -0.01559 -0.04513 -0.05187 -0.04213 -0.03239
2020-03-07 13:20:57,787 - Recv:  8 +0.78333 +0.62720 +0.47106 +0.33278 +0.21878 +0.12263 +0.04294 -0.02046 -0.06741 -0.09881 -0.10978 -0.10520 -0.10061
2020-03-07 13:20:57,832 - Recv:  9 +0.77350 +0.61598 +0.45846 +0.31700 +0.19624 +0.09154 +0.00500 -0.06156 -0.10994 -0.14350 -0.15839 -0.15844 -0.15850
2020-03-07 13:20:57,835 - Recv: 10 +0.76591 +0.60771 +0.44952 +0.30654 +0.18286 +0.07439 -0.01587 -0.08578 -0.13748 -0.17450 -0.19309 -0.19699 -0.20089
2020-03-07 13:20:57,837 - Recv: 11 +0.75870 +0.60074 +0.44277 +0.29952 +0.17497 +0.06515 -0.02719 -0.10020 -0.15573 -0.19650 -0.21849 -0.22572 -0.23294
2020-03-07 13:20:57,839 - Recv: 12 +0.75150 +0.59376 +0.43602 +0.29250 +0.16709 +0.05591 -0.03850 -0.11463 -0.17398 -0.21850 -0.24389 -0.25444 -0.26500
2020-03-07 13:20:57,842 - Recv: 
2020-03-07 13:20:57,844 - Recv: echo:Bed Leveling OFF
2020-03-07 13:20:57,849 - Recv: echo:Fade Height OFF
2020-03-07 13:20:57,853 - Recv: ok
2020-03-07 13:20:57,861 - Send: M851
2020-03-07 13:20:57,880 - Recv: Probe Offset X34.00 Y5.00 Z-0.60
2020-03-07 13:20:57,882 - Recv: ok
2020-03-07 13:20:57,886 - Send: M155 S2
2020-03-07 13:20:57,896 - Recv: ok
2020-03-07 13:20:59,909 - Recv:  T:31.74 /0.00 B:33.91 /0.00 @:0 B@:0
2020-03-07 13:21:01,908 - Recv:  T:31.69 /0.00 B:33.88 /0.00 @:0 B@:0
2020-03-07 13:21:03,906 - Recv:  T:31.60 /0.00 B:33.85 /0.00 @:0 B@:0
2020-03-07 13:21:05,867 - Changing monitoring state from "Operational" to "Starting"
2020-03-07 13:21:05,912 - Recv:  T:31.60 /0.00 B:33.88 /0.00 @:0 B@:0
2020-03-07 13:21:05,933 - Send: N0 M110 N0*125
2020-03-07 13:21:05,954 - Recv: ok
2020-03-07 13:21:05,963 - Changing monitoring state from "Starting" to "Printing"
2020-03-07 13:21:06,005 - Send: N1 M104 S210*103
2020-03-07 13:21:06,047 - Recv: ok
2020-03-07 13:21:06,052 - Changing monitoring state from "Printing" to "Cancelling"
2020-03-07 13:21:06,085 - Send: N2 M108*40
2020-03-07 13:21:06,097 - Recv: ok
2020-03-07 13:21:06,103 - Send: N3 M117 26% L=-/-*88
2020-03-07 13:21:06,115 - Recv: ok
2020-03-07 13:21:06,231 - Send: N4 M84*27
2020-03-07 13:21:06,247 - Recv: ok
2020-03-07 13:21:06,265 - Send: N5 M104 T0 S0*36
2020-03-07 13:21:06,271 - Recv: ok
2020-03-07 13:21:06,279 - Send: N6 M140 S0*99
2020-03-07 13:21:06,291 - Recv: ok
2020-03-07 13:21:06,340 - Send: N7 M106 S0*96
2020-03-07 13:21:06,373 - Recv: ok
2020-03-07 13:21:06,394 - Changing monitoring state from "Cancelling" to "Operational"
2020-03-07 13:21:07,901 - Recv:  T:31.67 /0.00 B:33.93 /0.00 @:0 B@:0
2020-03-07 13:21:09,899 - Recv:  T:31.62 /0.00 B:33.80 /0.00 @:0 B@:0
2020-03-07 13:21:11,912 - Recv:  T:31.83 /0.00 B:33.83 /0.00 @:0 B@:0
2020-03-07 13:21:13,911 - Recv:  T:31.78 /0.00 B:33.83 /0.00 @:0 B@:0
2020-03-07 13:21:15,908 - Recv:  T:31.92 /0.00 B:33.83 /0.00 @:0 B@:0
2020-03-07 13:21:17,905 - Recv:  T:31.92 /0.00 B:33.83 /0.00 @:0 B@:0
2020-03-07 13:21:19,903 - Recv:  T:31.90 /0.00 B:33.70 /0.00 @:0 B@:0
2020-03-07 13:21:21,901 - Recv:  T:31.94 /0.00 B:33.70 /0.00 @:0 B@:0
2020-03-07 13:21:23,898 - Recv:  T:31.96 /0.00 B:33.62 /0.00 @:0 B@:0
2020-03-07 13:21:25,897 - Recv:  T:32.01 /0.00 B:33.54 /0.00 @:0 B@:0
2020-03-07 13:21:27,911 - Recv:  T:31.99 /0.00 B:33.70 /0.00 @:0 B@:0
2020-03-07 13:21:29,908 - Recv:  T:31.96 /0.00 B:33.59 /0.00 @:0 B@:0
2020-03-07 13:21:31,906 - Recv:  T:31.83 /0.00 B:33.62 /0.00 @:0 B@:0
2020-03-07 13:21:33,291 - Changing monitoring state from "Operational" to "Starting"
2020-03-07 13:21:33,340 - Send: N0 M110 N0*125
2020-03-07 13:21:33,377 - Recv: ok
2020-03-07 13:21:33,389 - Changing monitoring state from "Starting" to "Printing"
2020-03-07 13:21:33,404 - Send: N1 M104 S210*103
2020-03-07 13:21:33,465 - Recv: ok
2020-03-07 13:21:33,488 - Send: N2 M190 S60*92
2020-03-07 13:21:33,493 - Changing monitoring state from "Printing" to "Cancelling"
2020-03-07 13:21:33,505 - Recv:  T:31.96 /210.00 B:33.59 /60.00 @:0 B@:0 W:?
2020-03-07 13:21:33,903 - Recv:  T:31.76 /210.00 B:33.59 /60.00 @:127 B@:0
2020-03-07 13:21:34,512 - Recv:  T:31.85 /210.00 B:33.52 /60.00 @:127 B@:0 W:?
2020-03-07 13:21:35,501 - Recv:  T:31.85 /210.00 B:33.65 /60.00 @:127 B@:0 W:?
2020-03-07 13:21:35,916 - Recv:  T:31.85 /210.00 B:33.52 /60.00 @:127 B@:127
2020-03-07 13:21:36,508 - Recv:  T:31.85 /210.00 B:33.33 /60.00 @:127 B@:127 W:?
2020-03-07 13:21:37,499 - Recv:  T:32.03 /210.00 B:33.65 /60.00 @:127 B@:127 W:?
2020-03-07 13:21:37,915 - Recv:  T:32.13 /210.00 B:33.52 /60.00 @:127 B@:127
2020-03-07 13:21:38,525 - Recv:  T:32.24 /210.00 B:33.78 /60.00 @:127 B@:127 W:?
2020-03-07 13:21:39,513 - Recv:  T:32.86 /210.00 B:33.96 /60.00 @:127 B@:127 W:?
2020-03-07 13:21:39,913 - Recv:  T:33.11 /210.00 B:34.04 /60.00 @:127 B@:127
2020-03-07 13:21:40,504 - Recv:  T:33.52 /210.00 B:34.24 /60.00 @:127 B@:127 W:?
2020-03-07 13:21:41,510 - Recv:  T:34.49 /210.00 B:34.66 /60.00 @:127 B@:127 W:?
2020-03-07 13:21:41,927 - Recv:  T:35.04 /210.00 B:34.82 /60.00 @:127 B@:127
2020-03-07 13:21:42,502 - Recv:  T:35.65 /210.00 B:34.97 /60.00 @:127 B@:127 W:?
2020-03-07 13:21:43,508 - Recv:  T:36.96 /210.00 B:35.40 /60.00 @:127 B@:127 W:?
2020-03-07 13:21:43,928 - Recv:  T:37.79 /210.00 B:35.42 /60.00 @:127 B@:127
2020-03-07 13:21:44,498 - Recv:  T:38.56 /210.00 B:35.71 /60.00 @:127 B@:127 W:?
2020-03-07 13:21:45,505 - Recv:  T:40.05 /210.00 B:35.98 /60.00 @:127 B@:127 W:?
2020-03-07 13:21:45,922 - Recv:  T:40.93 /210.00 B:36.17 /60.00 @:127 B@:127
2020-03-07 13:21:46,512 - Recv:  T:42.11 /210.00 B:36.35 /60.00 @:127 B@:127 W:?
2020-03-07 13:21:47,503 - Recv:  T:43.91 /210.00 B:36.75 /60.00 @:127 B@:127 W:?
2020-03-07 13:21:47,940 - Unexpected error while reading serial port, please consult octoprint.log for details: SerialException: 'device reports readiness to read but returned no data (device disconnected or multiple access on port?)' @ comm.py:_readline:2823
2020-03-07 13:21:47,957 - Please see https://faq.octoprint.org/serialerror for possible reasons of this.
2020-03-07 13:21:47,977 - Changing monitoring state from "Cancelling" to "Offline (Error: SerialException: 'device reports readiness to read but returned no data (device disconnected or multiple access on port?)' @ comm.py:_readline:2823)"
2020-03-07 13:21:47,983 - Connection closed, closing down monitor