2019-08-10 21:37:15,555 - Connecting to: /dev/ttyACM0
2019-08-10 21:37:15,568 - Changing monitoring state from "Offline" to "Opening serial port"
2019-08-10 21:37:15,571 - Connected to: Serial<id=0x6a7f8d70, open=True>(port='/dev/ttyACM0', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=10.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
2019-08-10 21:37:15,572 - Changing monitoring state from "Opening serial port" to "Connecting"
2019-08-10 21:37:15,594 - Send: N0 M110 N0*125
2019-08-10 21:37:15,597 - Recv: ok
2019-08-10 21:37:15,600 - Changing monitoring state from "Connecting" to "Operational"
2019-08-10 21:37:15,613 - Send: N0 M110 N0*125
2019-08-10 21:37:15,615 - Recv: ok
2019-08-10 21:37:15,617 - Send: N1 M115*39
2019-08-10 21:37:15,621 - Recv: FIRMWARE_NAME:Marlin bugfix-2.0.x (Github) SOURCE_CODE_URL:https://github.com/MarlinFirmware/Marlin PROTOCOL_VERSION:1.0 MACHINE_TYPE:3D Printer EXTRUDER_COUNT:1 UUID:cede2a2f-41a2-4748-9b12-c55c62f367ff
2019-08-10 21:37:15,627 - Recv: Cap:SERIAL_XON_XOFF:0
2019-08-10 21:37:15,637 - Recv: Cap:BINARY_FILE_TRANSFER:0
2019-08-10 21:37:15,638 - Recv: Cap:EEPROM:0
2019-08-10 21:37:15,639 - Recv: Cap:VOLUMETRIC:1
2019-08-10 21:37:15,640 - Recv: Cap:AUTOREPORT_TEMP:1
2019-08-10 21:37:15,703 - Recv: Cap:PROGRESS:0
2019-08-10 21:37:15,704 - Recv: Cap:PRINT_JOB:1
2019-08-10 21:37:15,705 - Recv: Cap:AUTOLEVEL:0
2019-08-10 21:37:15,706 - Recv: Cap:Z_PROBE:0
2019-08-10 21:37:15,708 - Recv: Cap:LEVELING_DATA:0
2019-08-10 21:37:15,709 - Recv: Cap:BUILD_PERCENT:0
2019-08-10 21:37:15,712 - Recv: Cap:SOFTWARE_POWER:0
2019-08-10 21:37:15,713 - Recv: Cap:TOGGLE_LIGHTS:0
2019-08-10 21:37:15,715 - Recv: Cap:CASE_LIGHT_BRIGHTNESS:0
2019-08-10 21:37:15,716 - Recv: Cap:EMERGENCY_PARSER:0
2019-08-10 21:37:15,718 - Recv: Cap:PROMPT_SUPPORT:0
2019-08-10 21:37:15,720 - Recv: Cap:AUTOREPORT_SD_STATUS:0
2019-08-10 21:37:15,721 - Recv: Cap:THERMAL_PROTECTION:1
2019-08-10 21:37:15,722 - Recv: Cap:MOTION_MODES:0
2019-08-10 21:37:15,723 - Recv: ok
2019-08-10 21:37:15,724 - Send: M21
2019-08-10 21:37:17,733 - Recv: echo:SD init fail
2019-08-10 21:37:17,744 - Recv: ok
2019-08-10 21:37:17,748 - Send: M155 S5
2019-08-10 21:37:17,773 - Recv: ok
2019-08-10 21:37:20,641 - Send: G91
2019-08-10 21:37:20,664 - Recv: ok
2019-08-10 21:37:20,668 - Send: G28 Z0
2019-08-10 21:37:22,777 - Recv:  T:16.87 /0.00 B:20.62 /0.00 @:0 B@:0
2019-08-10 21:37:24,670 - Recv: echo:busy: processing
2019-08-10 21:37:24,671 - Printer seems to support the busy protocol, will adjust timeouts and set busy interval accordingly
2019-08-10 21:37:27,020 - Recv: X:0.00 Y:0.00 Z:0.00 E:0.00 Count X:0 Y:0 Z:0
2019-08-10 21:37:27,024 - Recv: ok
2019-08-10 21:37:27,035 - Send: G90
2019-08-10 21:37:27,041 - Recv: ok
2019-08-10 21:37:27,046 - Send: M113 S4
2019-08-10 21:37:27,052 - Recv: ok
2019-08-10 21:37:45,078 - No response from printer after 3 consecutive communication timeouts, considering it dead. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
2019-08-10 21:37:45,097 - Changing monitoring state from "Operational" to "Offline (Error: Too many consecutive timeouts, printer still connected and alive?)"
2019-08-10 21:37:45,118 - Connection closed, closing down monitor
2019-08-10 22:39:18,813 - Changing monitoring state from "Offline" to "Detecting serial port"
2019-08-10 22:39:18,849 - Serial port list: []
2019-08-10 22:39:18,850 - Changing monitoring state from "Detecting serial port" to "Error: Failed to autodetect serial port, please set it manually."
2019-08-10 22:39:18,852 - Failed to autodetect serial port, please set it manually.
2019-08-10 22:39:50,998 - Changing monitoring state from "Offline" to "Detecting serial port"
2019-08-10 22:39:51,024 - Serial port list: ['/dev/ttyACM0']
2019-08-10 22:39:51,024 - Connecting to: /dev/ttyACM0
2019-08-10 22:39:51,038 - Changing monitoring state from "Detecting serial port" to "Opening serial port"
2019-08-10 22:39:51,042 - Connected to: Serial<id=0x6bf0ecb0, open=True>(port='/dev/ttyACM0', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=10.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
2019-08-10 22:39:51,043 - Changing monitoring state from "Opening serial port" to "Connecting"
2019-08-10 22:39:51,051 - Send: N0 M110 N0*125
2019-08-10 22:39:51,054 - Recv: ok
2019-08-10 22:39:51,057 - Changing monitoring state from "Connecting" to "Operational"
2019-08-10 22:39:51,068 - Send: N0 M110 N0*125
2019-08-10 22:39:51,071 - Recv: ok
2019-08-10 22:39:51,073 - Send: N1 M115*39
2019-08-10 22:39:51,075 - Recv: FIRMWARE_NAME:Marlin bugfix-2.0.x (Github) SOURCE_CODE_URL:https://github.com/MarlinFirmware/Marlin PROTOCOL_VERSION:1.0 MACHINE_TYPE:3D Printer EXTRUDER_COUNT:1 UUID:cede2a2f-41a2-4748-9b12-c55c62f367ff
2019-08-10 22:39:51,087 - Recv: Cap:SERIAL_XON_XOFF:0
2019-08-10 22:39:51,088 - Recv: Cap:BINARY_FILE_TRANSFER:0
2019-08-10 22:39:51,089 - Recv: Cap:EEPROM:0
2019-08-10 22:39:51,091 - Recv: Cap:VOLUMETRIC:1
2019-08-10 22:39:51,092 - Recv: Cap:AUTOREPORT_TEMP:1
2019-08-10 22:39:51,097 - Recv: Cap:PROGRESS:0
2019-08-10 22:39:51,099 - Recv: Cap:PRINT_JOB:1
2019-08-10 22:39:51,100 - Recv: Cap:AUTOLEVEL:0
2019-08-10 22:39:51,101 - Recv: Cap:Z_PROBE:0
2019-08-10 22:39:51,103 - Recv: Cap:LEVELING_DATA:0
2019-08-10 22:39:51,104 - Recv: Cap:BUILD_PERCENT:0
2019-08-10 22:39:51,107 - Recv: Cap:SOFTWARE_POWER:0
2019-08-10 22:39:51,108 - Recv: Cap:TOGGLE_LIGHTS:0
2019-08-10 22:39:51,110 - Recv: Cap:CASE_LIGHT_BRIGHTNESS:0
2019-08-10 22:39:51,111 - Recv: Cap:EMERGENCY_PARSER:0
2019-08-10 22:39:51,112 - Recv: Cap:PROMPT_SUPPORT:0
2019-08-10 22:39:51,114 - Recv: Cap:AUTOREPORT_SD_STATUS:0
2019-08-10 22:39:51,115 - Recv: Cap:THERMAL_PROTECTION:1
2019-08-10 22:39:51,117 - Recv: Cap:MOTION_MODES:0
2019-08-10 22:39:51,119 - Recv: ok
2019-08-10 22:39:51,120 - Send: M21
2019-08-10 22:39:53,133 - Recv: echo:SD init fail
2019-08-10 22:39:53,138 - Recv: ok
2019-08-10 22:39:53,143 - Send: M155 S2
2019-08-10 22:39:53,169 - Recv: ok
2019-08-10 22:41:23,238 - No response from printer after 3 consecutive communication timeouts, considering it dead. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
2019-08-10 22:41:23,259 - Changing monitoring state from "Operational" to "Offline (Error: Too many consecutive timeouts, printer still connected and alive?)"
2019-08-10 22:41:23,278 - Connection closed, closing down monitor