2024-01-06 23:28:31,441 - serial.log is currently not enabled, you can enable it via Settings > Serial Connection > Log communication to serial.log
2024-01-06 23:36:25,980 - serial.log is currently not enabled, you can enable it via Settings > Serial Connection > Log communication to serial.log
2024-01-06 23:40:10,913 - serial.log is currently not enabled, you can enable it via Settings > Serial Connection > Log communication to serial.log
2024-01-11 00:26:52,942 - serial.log is currently not enabled, you can enable it via Settings > Serial Connection > Log communication to serial.log
2024-01-11 00:38:08,554 - serial.log is currently not enabled, you can enable it via Settings > Serial Connection > Log communication to serial.log
2024-01-11 00:43:28,531 - Enabling serial logging
2024-01-11 00:43:28,980 - Recv:  T:35.26 /0.00 B:22.35 /0.00 @:0 B@:0
2024-01-11 00:43:29,139 - Recv: Not SD printing
2024-01-11 00:43:30,138 - Recv: Not SD printing
2024-01-11 00:43:30,984 - Recv:  T:35.24 /0.00 B:22.24 /0.00 @:0 B@:0
2024-01-11 00:43:31,150 - Recv: Not SD printing
2024-01-11 00:43:32,151 - Recv: Not SD printing
2024-01-11 00:43:32,967 - Recv:  T:35.15 /0.00 B:22.24 /0.00 @:0 B@:0
2024-01-11 00:43:33,149 - Recv: Not SD printing
2024-01-11 00:43:34,134 - Recv: Not SD printing
2024-01-11 00:43:34,970 - Recv:  T:35.00 /0.00 B:22.17 /0.00 @:0 B@:0
2024-01-11 00:43:35,134 - Recv: Not SD printing
2024-01-11 00:43:36,133 - Recv: Not SD printing
2024-01-11 00:43:36,968 - Recv:  T:34.89 /0.00 B:22.24 /0.00 @:0 B@:0
2024-01-11 00:43:37,140 - Recv: Not SD printing
2024-01-11 00:43:38,136 - Recv: Not SD printing
2024-01-11 00:43:38,967 - Recv:  T:34.78 /0.00 B:22.17 /0.00 @:0 B@:0
2024-01-11 00:43:39,140 - Recv: Not SD printing
2024-01-11 00:43:40,139 - Recv: Not SD printing
2024-01-11 00:43:40,967 - Recv:  T:34.76 /0.00 B:22.28 /0.00 @:0 B@:0
2024-01-11 00:43:41,139 - Recv: Not SD printing
2024-01-11 00:43:42,138 - Recv: Not SD printing
2024-01-11 00:43:42,969 - Recv:  T:34.68 /0.00 B:22.24 /0.00 @:0 B@:0
2024-01-11 00:43:43,141 - Recv: Not SD printing
2024-01-11 00:43:43,258 - Connection closed, closing down monitor
2024-01-11 00:43:43,263 - Changing monitoring state from "Operational" to "Offline"
2024-01-11 00:43:54,227 - Changing monitoring state from "Offline" to "Detecting serial connection"
2024-01-11 00:43:54,297 - Performing autodetection with 7 port/baudrate candidates: /dev/ttyACM0@115200, /dev/ttyACM0@250000, /dev/ttyACM0@230400, /dev/ttyACM0@57600, /dev/ttyACM0@38400, /dev/ttyACM0@19200, /dev/ttyACM0@9600
2024-01-11 00:43:54,298 - Trying port /dev/ttyACM0, baudrate 115200
2024-01-11 00:43:54,302 - Connecting to port /dev/ttyACM0, baudrate 115200
2024-01-11 00:43:54,388 - Handshake attempt #1 with timeout 2.0s
2024-01-11 00:43:54,392 - Connected to: Serial<id=0x6fed8db0, open=True>(port='/dev/ttyACM0', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=2.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
2024-01-11 00:43:54,429 - Send: N0 M110 N0*125
2024-01-11 00:43:57,290 - Handshake attempt #2 with timeout 2.0s
2024-01-11 00:43:57,303 - Send: N0 M110 N0*125
2024-01-11 00:43:58,289 - Recv: ánHnJj5®Y<H.]J=j=><yMyxñ^«h&HXñJsÐ^j@V³-7·¨{æ'*àd6}P| @(þg*À_D]p| '`(V«þ'j
2024-01-11 00:43:58,291 - WARNThe received line contains at least one null byte character at position 69, this hints at some data corruption going on
2024-01-11 00:44:00,306 - Handshake attempt #3 with timeout 2.0s
2024-01-11 00:44:00,327 - Send: N0 M110 N0*125
2024-01-11 00:44:02,791 - Trying port /dev/ttyACM0, baudrate 250000
2024-01-11 00:44:02,804 - Handshake attempt #1 with timeout 2.0s
2024-01-11 00:44:02,810 - Send: N0 M110 N0*125
2024-01-11 00:44:02,947 - Recv: á^;V7jOÌJYáÊ5æ'Z&øecho:busy: processing
2024-01-11 00:44:04,946 - Recv: echo:busy: processing
2024-01-11 00:44:04,950 - Printer seems to support the busy protocol, will adjust timeouts and set busy interval accordingly
2024-01-11 00:44:05,664 - Recv: X:-18.10 Y:303.50 Z:15.00 E:0.00 Count X:-2010 Y:30350 Z:24000
2024-01-11 00:44:05,673 - Recv: ok P13 B2
2024-01-11 00:44:05,691 - Changing monitoring state from "Detecting serial connection" to "Operational"
2024-01-11 00:44:05,709 - Send: N0 M110 N0*125
2024-01-11 00:44:05,838 - Recv: echo:Unknown command: "ø"
2024-01-11 00:44:05,841 - Recv: ok P13 B2
2024-01-11 00:44:05,849 - Send: N1 M115*39
2024-01-11 00:44:05,850 - Recv: ok N0 P13 B3
2024-01-11 00:44:05,856 - Send: N2 M21*18
2024-01-11 00:44:05,868 - Recv: ok N0 P13 B3
2024-01-11 00:44:05,898 - Recv: FIRMWARE_NAME:Marlin  FIRMWARE_VERSION:2.0.9.0.13 EXTRUDER_TYPE:Universal (Mar 21 2022 16:04:53) SOURCE_CODE_URL:https://gitlab.com/lulzbot3d/marlin PROTOCOL_VERSION:1.0 MACHINE_TYPE:LulzBot TAZ 6 EXTRUDER_COUNT:1 UUID:845f003c-aebd-4e53-a6b9-7d0984fde609
2024-01-11 00:44:05,903 - Recv: Cap:SERIAL_XON_XOFF:0
2024-01-11 00:44:05,917 - Recv: Cap:BINARY_FILE_TRANSFER:0
2024-01-11 00:44:05,927 - Recv: Cap:EEPROM:1
2024-01-11 00:44:05,941 - Recv: Cap:VOLUMETRIC:1
2024-01-11 00:44:05,975 - Recv: Cap:AUTOREPORT_POS:0
2024-01-11 00:44:06,019 - Recv: Cap:AUTOREPORT_TEMP:1
2024-01-11 00:44:06,043 - Recv: Cap:PROGRESS:0
2024-01-11 00:44:06,046 - Send: M155 S2
2024-01-11 00:44:06,055 - Recv: Cap:PRINT_JOB:1
2024-01-11 00:44:06,061 - Recv: Cap:AUTOLEVEL:1
2024-01-11 00:44:06,066 - Recv: Cap:RUNOUT:1
2024-01-11 00:44:06,070 - Recv: Cap:Z_PROBE:1
2024-01-11 00:44:06,073 - Recv: Cap:LEVELING_DATA:1
2024-01-11 00:44:06,076 - Recv: Cap:BUILD_PERCENT:1
2024-01-11 00:44:06,079 - Recv: Cap:SOFTWARE_POWER:0
2024-01-11 00:44:06,084 - Recv: Cap:TOGGLE_LIGHTS:0
2024-01-11 00:44:06,087 - Recv: Cap:CASE_LIGHT_BRIGHTNESS:0
2024-01-11 00:44:06,091 - Recv: Cap:EMERGENCY_PARSER:1
2024-01-11 00:44:06,095 - Recv: Cap:HOST_ACTION_COMMANDS:1
2024-01-11 00:44:06,099 - Recv: Cap:PROMPT_SUPPORT:0
2024-01-11 00:44:06,102 - Recv: Cap:SDCARD:1
2024-01-11 00:44:06,105 - Recv: Cap:REPEAT:0
2024-01-11 00:44:06,108 - Recv: Cap:SD_WRITE:1
2024-01-11 00:44:06,111 - Recv: Cap:AUTOREPORT_SD_STATUS:1
2024-01-11 00:44:06,115 - Recv: Cap:LONG_FILENAME:1
2024-01-11 00:44:06,118 - Recv: Cap:THERMAL_PROTECTION:1
2024-01-11 00:44:06,123 - Recv: Cap:MOTION_MODES:0
2024-01-11 00:44:06,127 - Recv: Cap:ARCS:1
2024-01-11 00:44:06,131 - Recv: Cap:BABYSTEPPING:1
2024-01-11 00:44:06,134 - Recv: Cap:CHAMBER_TEMPERATURE:0
2024-01-11 00:44:06,137 - Recv: Cap:COOLER_TEMPERATURE:0
2024-01-11 00:44:06,141 - Recv: Cap:MEATPACK:0
2024-01-11 00:44:06,144 - Recv: ok N1 P15 B3
2024-01-11 00:44:06,147 - Recv: Error:No Checksum with line number, Last Line: 1
2024-01-11 00:44:06,148 - Send: M27 S1
2024-01-11 00:44:06,152 - Recv: Resend: 2
2024-01-11 00:44:06,163 - Recv: ok
2024-01-11 00:44:06,166 - Recv: ok P15 B3
2024-01-11 00:44:06,169 - Recv: ok P15 B3
2024-01-11 00:44:06,171 - Send: N2 M21*18
2024-01-11 00:44:06,173 - Send: M20
2024-01-11 00:44:06,182 - Recv: echo:SD card ok
2024-01-11 00:44:06,188 - Recv: ok N2 P15 B3
2024-01-11 00:44:06,189 - Recv: Begin file list
2024-01-11 00:44:06,191 - Send: M20
2024-01-11 00:44:06,230 - Recv: /DOCUME~1/MANUAL/6.01/SOURCE/MANUAL.GLS 7377
2024-01-11 00:44:06,231 - Recv: /DOCUME~1/MANUAL/6.01/SOURCE/MANUAL.GST 363
2024-01-11 00:44:06,281 - Recv: /DOCUME~1/MANUAL/6.01/SOURCE/MANUAL.GLO 7102
2024-01-11 00:44:07,997 - Recv: /PRODUC~1/LABELS/TAZ_60~1.GLA 624898
2024-01-11 00:44:08,006 - Recv: /PRODUC~1/LABELS/TAZ_60~2.GLA 624895
2024-01-11 00:44:08,008 - Recv: /PRODUC~1/LABELS/SERIAL~1.GLA 1741
2024-01-11 00:44:08,010 - Recv: /PRODUC~1/LABELS/TAZ_60~3.GLA 624895
2024-01-11 00:44:08,071 - Recv: /PRODUC~2/JIGS/DOUBLE~1.GCO 3581252
2024-01-11 00:44:08,099 - Recv: /PRODUC~2/JIGS/CONTRO~1/TAZ6_C~1.GCO 3335
2024-01-11 00:44:08,107 - Recv: /PRODUC~2/JIGS/CONTRO~1/TAZ6_C~2.GCO 1389
2024-01-11 00:44:10,844 - Recv: start
2024-01-11 00:44:10,846 - Printer sent 'start' while already operational. External reset? Resetting line numbers to be on the safe side
2024-01-11 00:44:10,859 - Send: N0 M110 N0*125
2024-01-11 00:44:10,862 - Recv: Marlin 2.0.9.0.13
2024-01-11 00:44:10,875 - Recv: 
2024-01-11 00:44:10,878 - Recv: echo: Last Updated: 2021-06-15 | Author: Lulzbot
2024-01-11 00:44:10,880 - Recv: echo:Compiled: Mar 21 2022
2024-01-11 00:44:10,885 - Recv: echo: Free Memory: 2269  PlannerBufferBytes: 1456
2024-01-11 00:44:13,847 - Recv: echo:DIGIPOTS Loading
2024-01-11 00:44:13,849 - Recv: echo:DIGIPOTS Loaded
2024-01-11 00:44:13,860 - Recv: echo:DIGIPOTS Loading
2024-01-11 00:44:13,863 - Recv: echo:DIGIPOTS Loaded
2024-01-11 00:44:13,866 - Recv: echo:V83 stored settings retrieved (620 bytes; crc 53796)
2024-01-11 00:44:16,349 - Recv: echo:SD card ok
2024-01-11 00:44:18,512 - Recv: echo:busy: processing
2024-01-11 00:44:20,511 - Recv: echo:busy: processing
2024-01-11 00:44:21,265 - Recv: X:-18.10 Y:303.50 Z:15.00 E:0.00 Count X:-2010 Y:30350 Z:24000
2024-01-11 00:44:21,268 - Recv: ok N0 P13 B3
2024-01-11 00:44:21,285 - Send: N0 M110 N0*125
2024-01-11 00:44:21,302 - Recv: ok N0 P13 B3
2024-01-11 00:44:21,306 - Send: M155 S2
2024-01-11 00:44:21,343 - Recv: ok N0 P13 B2
2024-01-11 00:44:21,346 - Recv: ok P13 B3
2024-01-11 00:44:21,349 - Send: M27 S1
2024-01-11 00:44:21,354 - Recv: ok P13 B3
2024-01-11 00:44:22,355 - Recv: Not SD printing
2024-01-11 00:44:23,349 - Recv:  T:32.76 /0.00 B:22.21 /0.00 @:0 B@:0
2024-01-11 00:44:23,354 - Recv: Not SD printing
2024-01-11 00:44:24,357 - Recv: Not SD printing
2024-01-11 00:44:25,348 - Recv:  T:32.76 /0.00 B:22.07 /0.00 @:0 B@:0
2024-01-11 00:44:25,358 - Recv: Not SD printing
2024-01-11 00:44:26,356 - Recv: Not SD printing
2024-01-11 00:44:27,348 - Recv:  T:32.63 /0.00 B:21.97 /0.00 @:0 B@:0
2024-01-11 00:44:27,358 - Recv: Not SD printing
2024-01-11 00:44:28,355 - Recv: Not SD printing
2024-01-11 00:44:29,346 - Recv:  T:32.56 /0.00 B:22.21 /0.00 @:0 B@:0
2024-01-11 00:44:29,357 - Recv: Not SD printing
2024-01-11 00:44:30,355 - Recv: Not SD printing
2024-01-11 00:44:31,349 - Recv:  T:32.50 /0.00 B:22.21 /0.00 @:0 B@:0
2024-01-11 00:44:31,363 - Recv: Not SD printing
2024-01-11 00:44:32,357 - Recv: Not SD printing
2024-01-11 00:44:33,347 - Recv:  T:32.37 /0.00 B:22.24 /0.00 @:0 B@:0
2024-01-11 00:44:33,369 - Recv: Not SD printing
2024-01-11 00:44:34,368 - Recv: Not SD printing
2024-01-11 00:44:35,347 - Recv:  T:32.39 /0.00 B:22.28 /0.00 @:0 B@:0
2024-01-11 00:44:35,368 - Recv: Not SD printing
2024-01-11 00:44:36,367 - Recv: Not SD printing
2024-01-11 00:44:37,350 - Recv:  T:32.28 /0.00 B:22.10 /0.00 @:0 B@:0
2024-01-11 00:44:37,370 - Recv: Not SD printing
2024-01-11 00:44:38,369 - Recv: Not SD printing
2024-01-11 00:44:39,349 - Recv:  T:32.18 /0.00 B:22.35 /0.00 @:0 B@:0
2024-01-11 00:44:39,369 - Recv: Not SD printing
2024-01-11 00:44:40,369 - Recv: Not SD printing
2024-01-11 00:44:40,797 - Send: G91
2024-01-11 00:44:40,813 - Recv: ok P15 B3
2024-01-11 00:44:40,815 - Send: G28 X0 Y0
2024-01-11 00:44:41,351 - Recv:  T:32.09 /0.00 B:22.14 /0.00 @:0 B@:0
2024-01-11 00:44:41,368 - Recv: Not SD printing
2024-01-11 00:44:42,369 - Recv: Not SD printing
2024-01-11 00:44:42,818 - Recv: echo:busy: processing
2024-01-11 00:44:43,351 - Recv:  T:32.07 /0.00 B:22.14 /0.00 @:0 B@:0
2024-01-11 00:44:43,367 - Recv: Not SD printing
2024-01-11 00:44:43,445 - Recv: X:-18.10 Y:301.50 Z:15.00 E:0.00 Count X:-1810 Y:30350 Z:24000
2024-01-11 00:44:43,448 - Recv: ok P13 B3
2024-01-11 00:44:43,453 - Send: G90
2024-01-11 00:44:43,463 - Recv: ok P13 B3
2024-01-11 00:44:44,370 - Recv: Not SD printing
2024-01-11 00:44:45,351 - Recv:  T:31.96 /0.00 B:22.17 /0.00 @:0 B@:0
2024-01-11 00:44:45,370 - Recv: Not SD printing
2024-01-11 00:44:46,370 - Recv: Not SD printing
2024-01-11 00:44:47,348 - Recv:  T:31.83 /0.00 B:22.31 /0.00 @:0 B@:0
2024-01-11 00:44:47,369 - Recv: Not SD printing
2024-01-11 00:44:48,369 - Recv: Not SD printing
2024-01-11 00:44:49,347 - Recv:  T:31.83 /0.00 B:22.31 /0.00 @:0 B@:0
2024-01-11 00:44:49,369 - Recv: Not SD printing
2024-01-11 00:44:49,808 - Changing monitoring state from "Operational" to "Starting"
2024-01-11 00:44:49,897 - Send: N0 M110 N0*125
2024-01-11 00:44:49,904 - Recv: ok N0 P15 B3
2024-01-11 00:44:49,966 - Changing monitoring state from "Starting" to "Printing"
2024-01-11 00:44:49,980 - Send: N1 M82*24
2024-01-11 00:44:50,052 - Recv: ok N1 P15 B3
2024-01-11 00:44:50,057 - Send: N2 M73 P0*85
2024-01-11 00:44:50,107 - Recv: ok N2 P15 B3
2024-01-11 00:44:50,117 - Send: N3 M75*18
2024-01-11 00:44:50,128 - Recv: ok N3 P15 B3
2024-01-11 00:44:50,137 - Send: N4 G26*25
2024-01-11 00:44:50,169 - Recv: echo:Unknown command: "G26"
2024-01-11 00:44:50,170 - Recv: ok N4 P15 B3
2024-01-11 00:44:50,173 - Send: N5 M107*32
2024-01-11 00:44:50,209 - Recv: ok N5 P15 B3
2024-01-11 00:44:50,217 - Send: N6 M420 S0*96
2024-01-11 00:44:50,248 - Recv: echo:Bed Leveling OFF
2024-01-11 00:44:50,258 - Recv: echo:Fade Height OFF
2024-01-11 00:44:50,259 - Recv: ok N6 P15 B3
2024-01-11 00:44:50,262 - Send: N7 M900 K0.05*93
2024-01-11 00:44:50,308 - Recv: ok N7 P15 B3
2024-01-11 00:44:50,320 - Send: N8 G90*24
2024-01-11 00:44:50,340 - Recv: ok N8 P15 B3
2024-01-11 00:44:50,344 - Send: N9 M82*16
2024-01-11 00:44:50,401 - Recv: ok N9 P15 B3
2024-01-11 00:44:50,404 - Recv: Not SD printing
2024-01-11 00:44:50,406 - Send: N10 G92 E0*118
2024-01-11 00:44:50,446 - Recv: X:-18.10 Y:301.50 Z:15.00 E:0.00 Count X:-1810 Y:30150 Z:24000
2024-01-11 00:44:50,448 - Recv: ok N10 P15 B3
2024-01-11 00:44:50,451 - Send: N11 M140 S65*102
2024-01-11 00:44:50,485 - Recv: ok N11 P15 B3
2024-01-11 00:44:50,494 - Send: N12 G28 XY*1
2024-01-11 00:44:51,387 - Recv:  T:31.70 /0.00 B:22.24 /65.00 @:0 B@:103
2024-01-11 00:44:51,390 - Recv: Not SD printing
2024-01-11 00:44:52,231 - Recv: X:-18.10 Y:301.50 Z:15.00 E:0.00 Count X:-1810 Y:30350 Z:24000
2024-01-11 00:44:52,233 - Recv: ok N12 P13 B3
2024-01-11 00:44:52,239 - Send: N13 G1 X-19 Y258 F1000*102
2024-01-11 00:44:52,266 - Recv: ok N13 P12 B3
2024-01-11 00:44:52,270 - Send: N14 M109 R180*85
2024-01-11 00:44:52,317 - Recv:  T:31.79 /180.00 B:22.42 /65.00 @:0 B@:103 W:?
2024-01-11 00:44:52,381 - Recv: Not SD printing
2024-01-11 00:44:53,305 - Recv:  T:31.62 /180.00 B:22.49 /65.00 @:127 B@:103 W:?
2024-01-11 00:44:53,349 - Recv:  T:31.62 /180.00 B:22.49 /65.00 @:127 B@:103
2024-01-11 00:44:53,370 - Recv: Not SD printing
2024-01-11 00:44:54,280 - Recv: echo:busy: processing
2024-01-11 00:44:54,308 - Recv:  T:31.68 /180.00 B:22.45 /65.00 @:127 B@:103 W:?
2024-01-11 00:44:54,370 - Recv: Not SD printing
2024-01-11 00:44:55,308 - Recv:  T:32.11 /180.00 B:22.73 /65.00 @:127 B@:103 W:?
2024-01-11 00:44:55,352 - Recv:  T:32.26 /180.00 B:22.69 /65.00 @:127 B@:103
2024-01-11 00:44:55,369 - Recv: Not SD printing
2024-01-11 00:44:56,283 - Recv: echo:busy: processing
2024-01-11 00:44:56,307 - Recv:  T:32.97 /180.00 B:22.76 /65.00 @:127 B@:103 W:?
2024-01-11 00:44:56,369 - Recv: Not SD printing
2024-01-11 00:44:57,307 - Recv:  T:34.55 /180.00 B:23.01 /65.00 @:127 B@:103 W:?
2024-01-11 00:44:57,353 - Recv:  T:34.55 /180.00 B:23.01 /65.00 @:127 B@:103
2024-01-11 00:44:57,368 - Recv: Not SD printing
2024-01-11 00:44:58,286 - Recv: echo:busy: processing
2024-01-11 00:44:58,306 - Recv:  T:36.49 /180.00 B:23.49 /65.00 @:127 B@:103 W:?
2024-01-11 00:44:58,372 - Recv: Not SD printing
2024-01-11 00:44:59,326 - Recv:  T:38.69 /180.00 B:23.74 /65.00 @:127 B@:103 W:?
2024-01-11 00:44:59,351 - Recv:  T:38.69 /180.00 B:23.74 /65.00 @:127 B@:103
2024-01-11 00:44:59,371 - Recv: Not SD printing
2024-01-11 00:45:00,285 - Recv: echo:busy: processing
2024-01-11 00:45:00,325 - Recv:  T:40.94 /180.00 B:23.98 /65.00 @:127 B@:103 W:?
2024-01-11 00:45:00,391 - Recv: Not SD printing
2024-01-11 00:45:01,324 - Recv:  T:43.03 /180.00 B:24.33 /65.00 @:127 B@:103 W:?
2024-01-11 00:45:01,354 - Recv:  T:43.03 /180.00 B:24.33 /65.00 @:127 B@:103
2024-01-11 00:45:01,390 - Recv: Not SD printing
2024-01-11 00:45:02,283 - Recv: echo:busy: processing
2024-01-11 00:45:02,328 - Recv:  T:45.33 /180.00 B:24.57 /65.00 @:127 B@:103 W:?
2024-01-11 00:45:02,393 - Recv: Not SD printing
2024-01-11 00:45:03,327 - Recv:  T:47.86 /180.00 B:24.85 /65.00 @:127 B@:103 W:?
2024-01-11 00:45:03,352 - Recv:  T:47.86 /180.00 B:24.85 /65.00 @:127 B@:103
2024-01-11 00:45:03,390 - Recv: Not SD printing
2024-01-11 00:45:04,176 - Changing monitoring state from "Printing" to "Cancelling"
2024-01-11 00:45:04,197 - Send: N15 M108*30
2024-01-11 00:45:04,213 - Recv: ok N14 P15 B2
2024-01-11 00:45:04,215 - Recv: ok N15 P15 B3
2024-01-11 00:45:04,405 - Recv: Not SD printing
2024-01-11 00:45:04,506 - Send: N16 M84*40
2024-01-11 00:45:04,532 - Recv: ok N16 P15 B3
2024-01-11 00:45:04,550 - Send: N17 M104 T0 S0*23
2024-01-11 00:45:04,560 - Recv: ok N17 P15 B3
2024-01-11 00:45:04,563 - Send: N18 M140 S0*92
2024-01-11 00:45:04,581 - Recv: ok N18 P15 B3
2024-01-11 00:45:04,585 - Send: N19 M106 S0*95
2024-01-11 00:45:04,628 - Recv: ok N19 P15 B3
2024-01-11 00:45:04,632 - Changing monitoring state from "Cancelling" to "Operational"
2024-01-11 00:45:05,352 - Recv:  T:53.03 /0.00 B:25.58 /0.00 @:0 B@:0
2024-01-11 00:45:05,389 - Recv: Not SD printing
2024-01-11 00:45:06,391 - Recv: Not SD printing
2024-01-11 00:45:07,350 - Recv:  T:57.50 /0.00 B:26.17 /0.00 @:0 B@:0
2024-01-11 00:45:07,391 - Recv: Not SD printing
2024-01-11 00:45:08,390 - Recv: Not SD printing
2024-01-11 00:45:09,349 - Recv:  T:60.43 /0.00 B:26.41 /0.00 @:0 B@:0
2024-01-11 00:45:09,390 - Recv: Not SD printing
2024-01-11 00:45:10,390 - Recv: Not SD printing
2024-01-11 00:45:11,351 - Recv:  T:61.63 /0.00 B:26.44 /0.00 @:0 B@:0
2024-01-11 00:45:11,389 - Recv: Not SD printing
2024-01-11 00:45:11,695 - Connection closed, closing down monitor
2024-01-11 00:45:11,702 - Changing monitoring state from "Operational" to "Offline"