2020-02-03 20:32:48,810 - Changing monitoring state from "Offline" to "Detecting serial port"
2020-02-03 20:32:48,822 - Serial port list: ['/dev/ttyACM0']
2020-02-03 20:32:48,822 - Connecting to: /dev/ttyACM0
2020-02-03 20:32:48,838 - Changing monitoring state from "Detecting serial port" to "Opening serial port"
2020-02-03 20:32:48,853 - Connected to: Serial<id=0xb0ccf4b0, open=True>(port='/dev/ttyACM0', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=10.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
2020-02-03 20:32:48,853 - Changing monitoring state from "Opening serial port" to "Connecting"
2020-02-03 20:33:59,063 - There was a timeout while trying to connect to the printer
2020-02-03 20:33:59,082 - Changing monitoring state from "Connecting" to "Offline"
2020-02-03 20:33:59,092 - Connection closed, closing down monitor
2020-02-03 20:34:06,566 - Connecting to: /dev/ttyACM0
2020-02-03 20:34:06,587 - Changing monitoring state from "Offline" to "Opening serial port"
2020-02-03 20:34:06,596 - Connected to: Serial<id=0xaaa8ea50, open=True>(port='/dev/ttyACM0', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=10.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
2020-02-03 20:34:06,596 - Changing monitoring state from "Opening serial port" to "Connecting"
2020-02-03 20:34:36,635 - There was a timeout while trying to connect to the printer
2020-02-03 20:34:36,647 - Changing monitoring state from "Connecting" to "Offline"
2020-02-03 20:34:36,656 - Connection closed, closing down monitor
2020-02-03 20:34:48,269 - Changing monitoring state from "Offline" to "Detecting serial port"
2020-02-03 20:34:48,282 - Serial port list: ['/dev/ttyACM0']
2020-02-03 20:34:48,283 - Connecting to: /dev/ttyACM0
2020-02-03 20:34:48,303 - Changing monitoring state from "Detecting serial port" to "Opening serial port"
2020-02-03 20:34:48,306 - Connected to: Serial<id=0xb2a877b0, open=True>(port='/dev/ttyACM0', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=10.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
2020-02-03 20:34:48,307 - Starting baud rate detection...
2020-02-03 20:34:48,307 - Changing monitoring state from "Opening serial port" to "Detecting baudrate"
2020-02-03 20:34:49,312 - Trying baudrate: 115200
2020-02-03 20:34:49,321 - Send: N0 M110 N0*125
2020-02-03 20:34:49,323 - Recv: ok
2020-02-03 20:34:49,327 - Changing monitoring state from "Detecting baudrate" to "Operational"
2020-02-03 20:34:49,340 - Send: N0 M110 N0*125
2020-02-03 20:34:49,348 - Recv: ok
2020-02-03 20:34:49,353 - Send: N1 M115*39
2020-02-03 20:34:49,355 - Recv: FIRMWARE_NAME:Marlin 2.0.1 (GitHub) SOURCE_CODE_URL:https://github.com/MarlinFirmware/Marlin PROTOCOL_VERSION:1.0 MACHINE_TYPE:Blackhole EXTRUDER_COUNT:1 UUID:cede2a2f-41a2-4748-9b12-c55c62f367ff
2020-02-03 20:34:49,378 - Recv: Cap:SERIAL_XON_XOFF:0
2020-02-03 20:34:49,381 - Recv: Cap:BINARY_FILE_TRANSFER:0
2020-02-03 20:34:49,383 - Recv: Cap:EEPROM:1
2020-02-03 20:34:49,385 - Recv: Cap:VOLUMETRIC:1
2020-02-03 20:34:49,393 - Recv: Cap:AUTOREPORT_TEMP:1
2020-02-03 20:34:49,405 - Recv: Cap:PROGRESS:0
2020-02-03 20:34:49,407 - Recv: Cap:PRINT_JOB:1
2020-02-03 20:34:49,409 - Recv: Cap:AUTOLEVEL:0
2020-02-03 20:34:49,411 - Recv: Cap:Z_PROBE:0
2020-02-03 20:34:49,413 - Recv: Cap:LEVELING_DATA:0
2020-02-03 20:34:49,415 - Recv: Cap:BUILD_PERCENT:0
2020-02-03 20:34:49,416 - Recv: Cap:SOFTWARE_POWER:0
2020-02-03 20:34:49,418 - Recv: Cap:TOGGLE_LIGHTS:0
2020-02-03 20:34:49,421 - Recv: Cap:CASE_LIGHT_BRIGHTNESS:0
2020-02-03 20:34:49,423 - Recv: Cap:EMERGENCY_PARSER:1
2020-02-03 20:34:49,426 - Recv: Cap:PROMPT_SUPPORT:1
2020-02-03 20:34:49,429 - Recv: Cap:AUTOREPORT_SD_STATUS:0
2020-02-03 20:34:49,431 - Recv: Cap:THERMAL_PROTECTION:1
2020-02-03 20:34:49,433 - Recv: Cap:MOTION_MODES:0
2020-02-03 20:34:49,434 - Recv: Cap:CHAMBER_TEMPERATURE:0
2020-02-03 20:34:49,436 - Recv: ok
2020-02-03 20:34:49,439 - Send: M21
2020-02-03 20:34:51,440 - Recv: echo:SD init fail
2020-02-03 20:34:51,447 - Recv: ok
2020-02-03 20:34:51,449 - Send: M155 S2
2020-02-03 20:34:51,492 - Recv: ok
2020-02-03 20:34:51,495 - Send: M876 P1
2020-02-03 20:34:51,497 - Recv: ok
2020-02-03 20:34:53,499 - Recv:  T:19.69 /0.00 B:-15.00 /0.00 @:0 B@:0
2020-02-03 20:34:55,499 - Recv:  T:19.69 /0.00 B:-15.00 /0.00 @:0 B@:0
2020-02-03 20:34:57,499 - Recv:  T:19.69 /0.00 B:-15.00 /0.00 @:0 B@:0
2020-02-03 20:34:59,499 - Recv:  T:19.69 /0.00 B:-15.00 /0.00 @:0 B@:0
2020-02-03 20:35:01,499 - Recv:  T:19.69 /0.00 B:-15.00 /0.00 @:0 B@:0
2020-02-03 20:35:03,521 - Recv:  T:19.69 /0.00 B:-15.00 /0.00 @:0 B@:0
2020-02-03 20:35:05,521 - Recv:  T:19.69 /0.00 B:-15.00 /0.00 @:0 B@:0
2020-02-03 20:35:05,953 - Send: G91
2020-02-03 20:35:05,960 - Recv: ok
2020-02-03 20:35:05,962 - Send: G28 Z0
2020-02-03 20:35:07,521 - Recv:  T:19.69 /0.00 B:-15.00 /0.00 @:0 B@:0
2020-02-03 20:35:07,963 - Recv: echo:busy: processing
2020-02-03 20:35:07,964 - Printer seems to support the busy protocol, will adjust timeouts and set busy interval accordingly
2020-02-03 20:35:09,521 - Recv:  T:19.84 /0.00 B:-15.00 /0.00 @:0 B@:0
2020-02-03 20:35:09,963 - Recv: echo:busy: processing
2020-02-03 20:35:11,522 - Recv:  T:19.69 /0.00 B:-15.00 /0.00 @:0 B@:0
2020-02-03 20:35:11,963 - Recv: echo:busy: processing
2020-02-03 20:35:13,521 - Recv:  T:19.69 /0.00 B:-15.00 /0.00 @:0 B@:0
2020-02-03 20:35:13,964 - Recv: echo:busy: processing
2020-02-03 20:35:15,521 - Recv:  T:19.84 /0.00 B:-15.00 /0.00 @:0 B@:0
2020-02-03 20:35:15,964 - Recv: echo:busy: processing
2020-02-03 20:35:17,521 - Recv:  T:19.69 /0.00 B:-15.00 /0.00 @:0 B@:0
2020-02-03 20:35:17,964 - Recv: echo:busy: processing
2020-02-03 20:35:19,521 - Recv:  T:19.69 /0.00 B:-15.00 /0.00 @:0 B@:0
2020-02-03 20:35:19,964 - Recv: echo:busy: processing
2020-02-03 20:35:21,522 - Recv:  T:19.53 /0.00 B:-15.00 /0.00 @:0 B@:0
2020-02-03 20:35:21,964 - Recv: echo:busy: processing
2020-02-03 20:35:23,522 - Recv:  T:20.16 /0.00 B:-15.00 /0.00 @:0 B@:0
2020-02-03 20:35:23,964 - Recv: echo:busy: processing
2020-02-03 20:35:25,522 - Recv:  T:19.69 /0.00 B:-15.00 /0.00 @:0 B@:0
2020-02-03 20:35:25,964 - Recv: echo:busy: processing
2020-02-03 20:35:26,538 - Recv: X:220.00 Y:220.00 Z:0.00 E:0.00 Count X:17600 Y:17600 Z:0
2020-02-03 20:35:26,543 - Recv: ok
2020-02-03 20:35:26,549 - Send: G90
2020-02-03 20:35:26,554 - Recv: ok
2020-02-03 20:35:26,556 - Send: M113 S2
2020-02-03 20:35:26,560 - Recv: ok
2020-02-03 20:35:27,522 - Recv:  T:19.69 /0.00 B:-15.00 /0.00 @:0 B@:0
2020-02-03 20:35:29,522 - Recv:  T:19.84 /0.00 B:-15.00 /0.00 @:0 B@:0
2020-02-03 20:35:31,522 - Recv:  T:19.69 /0.00 B:-15.00 /0.00 @:0 B@:0
2020-02-03 20:35:33,522 - Recv:  T:19.69 /0.00 B:-15.00 /0.00 @:0 B@:0
2020-02-03 20:35:35,522 - Recv:  T:19.84 /0.00 B:-15.00 /0.00 @:0 B@:0
2020-02-03 20:35:37,522 - Recv:  T:19.69 /0.00 B:-15.00 /0.00 @:0 B@:0
2020-02-03 20:35:38,429 - Changing monitoring state from "Operational" to "Starting"
2020-02-03 20:35:38,487 - Send: N0 M110 N0*125
2020-02-03 20:35:38,499 - Recv: ok
2020-02-03 20:35:38,511 - Changing monitoring state from "Starting" to "Printing"
2020-02-03 20:35:38,531 - Send: N1 M82*24
2020-02-03 20:35:38,533 - Recv: ok
2020-02-03 20:35:38,542 - Send: N2 M201 X500.00 Y500.00 Z100.00 E5000.00*8
2020-02-03 20:35:38,551 - Recv: ok
2020-02-03 20:35:38,556 - Send: N3 M203 X500.00 Y500.00 Z10.00 E50.00*59
2020-02-03 20:35:38,559 - Recv: ok
2020-02-03 20:35:38,564 - Send: N4 M204 P500.00 R1000.00 T500.00*120
2020-02-03 20:35:38,566 - Recv: ok
2020-02-03 20:35:38,569 - Send: N5 M205 X8.00 Y8.00 Z0.40 E5.00*62
2020-02-03 20:35:38,571 - Recv: ok
2020-02-03 20:35:38,574 - Send: N6 M220 S100*103
2020-02-03 20:35:38,576 - Recv: ok
2020-02-03 20:35:38,579 - Send: N7 M221 S100*103
2020-02-03 20:35:38,581 - Recv: ok
2020-02-03 20:35:38,584 - Send: N8 M140 S55*93
2020-02-03 20:35:38,587 - Recv: ok
2020-02-03 20:35:38,591 - Send: N9 M104 S195 ?T0*26
2020-02-03 20:35:38,593 - Recv: ok
2020-02-03 20:35:38,596 - Send: N10 G28*34
2020-02-03 20:35:56,616 - No response from printer after 6 consecutive communication timeouts, considering it dead. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
2020-02-03 20:36:01,684 - Changing monitoring state from "Printing" to "Offline (Error: Too many consecutive timeouts, printer still connected and alive?)"
2020-02-03 20:36:01,711 - Connection closed, closing down monitor