2020-12-28 21:30:36,344 - octoprint.plugins.tracking - INFO - Sent tracking event pong, payload: {u'python': '2.7.16', u'os': u'linux', u'ram': 4041732096L, u'octopi_version': u'0.17.0', u'version': u'1.5.2', u'plugins': u'displaylayerprogress:1.24.0,bltouch:0.3.4,iponconnect:0.2.4,betterheatertimeout:1.3.0,abl_expert:0.6,enclosure:4.13.1,webcamsb:0.1.8,bedlevelvisualizer:1.0.0,detailedprogress:0.2.6,navbartemp:0.14,change_filament:0.3.1,excluderegion:0.3.0,dashboard:1.16.3,floatingnavbar:0.3.4,printtimegenius:2.2.7,octolapse:0.4.1', u'pip': '19.3.1', u'cores': 4, u'freq': 1500.0, u'pi_model': u'Raspberry Pi 4 Model B Rev 1.1', u'bits': 32}
2020-12-28 21:30:36,347 - octoprint.server - INFO - --- Log roll over detected ---------------------------------------------------
2020-12-28 21:30:36,347 - octoprint.server - INFO - OctoPrint 1.5.2
2020-12-28 21:30:36,349 - octoprint.plugin.core - INFO - 33 plugin(s) registered with the system:
|  ABL Expert Plugin (0.6) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_ABL_Expert
|  Action Command Notification Support (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/action_command_notification
|  Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/action_command_prompt
|  Announcement Plugin (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/announcements
|  Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/tracking
|  Application Keys Plugin (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/appkeys
|  Backup & Restore (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/backup
|  Bed Visualizer (1.0.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_bedlevelvisualizer
|  BetterHeaterTimeout (1.3.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_BetterHeaterTimeout
|  BLTouch Plugin (0.3.4) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_BLTouch
|  Change Filament Plugin (0.3.1) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_Change_Filament
|  Core Wizard (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/corewizard
|  Dashboard (1.16.3) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_dashboard
|  Detailed Progress (0.2.6) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_detailedprogress
|  Discovery (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/discovery
|  DisplayLayerProgress Plugin (1.24.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_DisplayLayerProgress
|  Enclosure Plugin (4.13.1) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_enclosure
|  Error Tracking (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/errortracking
|  Exclude Region (0.3.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_excluderegion
|  File Check (2020.8.7) (bundled) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_file_check
|  Firmware Check (2020.9.23) (bundled) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_firmware_check
|  Floating Navbar (0.3.4) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_floatingnavbar
|  GCode Viewer (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/gcodeviewer
|  ipOnConnect (0.2.4) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_ipOnConnect
|  Logging (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/logging
|  Navbar Temperature Plugin (0.14) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_navbartemp
|  Octolapse (0.4.1) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_octolapse
|  Pi Support Plugin (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/pi_support
|  Plugin Manager (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/pluginmanager
|  PrintTimeGenius Plugin (2.2.7) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_PrintTimeGenius
|  Sidebar Webcam (0.1.8) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_webcamSB
|  Software Update (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/softwareupdate
|  Virtual Printer (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/virtual_printer
Prefix legend: ! = disabled, # = blacklisted, * = incompatible
2020-12-28 21:30:36,356 - octoprint.environment - INFO - Detected environment is Python 2.7.16 under Linux (linux2). Details:
|  hardware:
|      cores: 4
|      freq: 1500.0
|      ram: 4041732096
|  os:
|      bits: 32
|      id: linux
|      platform: linux2
|  plugins:
|      pi_support:
|          model: Raspberry Pi 4 Model B Rev 1.1
|          octopi_version: 0.17.0
|          throttle_state: '0x0'
|  python:
|      pip: 19.3.1
|      version: 2.7.16
|      virtualenv: /home/pi/oprint
2020-12-28 21:30:36,356 - octoprint.server - INFO - ------------------------------------------------------------------------------
2020-12-28 21:30:41,372 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2020-12-28 21:30:41,639 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 45019}
2020-12-28 21:37:47,243 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.0.101
2020-12-28 21:38:48,376 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.0.101
2020-12-28 21:38:52,648 - octoprint.access.users - INFO - Logged in user: GeoJdk
2020-12-28 21:38:52,652 - octoprint.server.api - INFO - Actively logging in user GeoJdk from ::ffff:192.168.0.101
2020-12-28 21:38:52,733 - octoprint.server.util.flask - INFO - Passively logging in user GeoJdk from ::ffff:192.168.0.101
2020-12-28 21:38:52,735 - octoprint.access.users - INFO - Logged in user: GeoJdk
2020-12-28 21:38:52,823 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.0.101
2020-12-28 21:38:53,845 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.0.101
2020-12-28 21:38:53,884 - octoprint.server.util.flask - INFO - Passively logging in user GeoJdk from ::ffff:192.168.0.101
2020-12-28 21:38:53,885 - octoprint.access.users - INFO - Logged in user: GeoJdk
2020-12-28 21:38:54,133 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json
2020-12-28 21:38:57,929 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from https://plugins.octoprint.org/plugins.json
2020-12-28 21:38:59,023 - octoprint.plugins.pluginmanager - INFO - Loaded plugin notices data from https://plugins.octoprint.org/notices.json
2020-12-28 21:39:01,645 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk
2020-12-28 21:39:01,840 - octoprint.server.util.sockjs - INFO - User GeoJdk logged in on the socket from client ::ffff:192.168.0.101
2020-12-28 21:39:10,186 - octoprint.server.api.system - INFO - Performing command for core:shutdown: sudo shutdown -h now
2020-12-28 21:39:10,439 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.0.101
2020-12-28 21:39:10,567 - octoprint.server - INFO - Shutting down...
2020-12-28 21:39:10,669 - octoprint.server - INFO - Calling on_shutdown on plugins
2020-12-28 21:39:10,670 - octoprint.events - INFO - Processing shutdown event, this will be our last event
2020-12-28 21:39:10,676 - octoprint.events - INFO - Event loop shut down
2020-12-28 21:39:11,831 - octoprint.plugins.tracking - INFO - Sent tracking event shutdown, payload: {}
2020-12-28 21:39:12,013 - octoprint.server - INFO - Goodbye!
2020-12-28 21:39:18,643 - octoprint.startup - INFO - ******************************************************************************
2020-12-28 21:39:18,644 - octoprint.startup - INFO - Starting OctoPrint 1.5.2
2020-12-28 21:39:18,645 - octoprint.startup - INFO - ******************************************************************************
2020-12-28 21:39:25,076 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: offline
2020-12-28 21:39:25,078 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 8.8.8.8:53 is not working
2020-12-28 21:39:25,079 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is not working
2020-12-28 21:39:25,086 - octoprint.startup - INFO - We don't appear to be online, not fetching plugin blacklist
2020-12-28 21:39:25,162 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages...
2020-12-28 21:39:27,844 - octoprint.startup - INFO - Added settings overlay from plugin dashboard
2020-12-28 21:39:27,864 - octoprint.plugin.core - INFO - Found 33 plugin(s) providing 33 mixin implementations, 74 hook handlers
2020-12-28 21:39:28,028 - octoprint.server.heartbeat - INFO - Starting server heartbeat, 900.0s interval
2020-12-28 21:39:28,137 - octoprint.server - INFO - Intermediary server started
2020-12-28 21:39:28,159 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/pi/.octoprint/uploads...
2020-12-28 21:39:28,449 - octoprint.filemanager.storage - INFO - ... file metadata for /home/pi/.octoprint/uploads initialized successfully.
2020-12-28 21:39:28,453 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_SHOW (needs: u"Need(method='role', value=u'plugin_action_command_notification_show')")
2020-12-28 21:39:28,453 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_CLEAR (needs: u"Need(method='role', value=u'plugin_action_command_notification_clear')")
2020-12-28 21:39:28,455 - octoprint.server - INFO - Added new permission from plugin action_command_prompt: PLUGIN_ACTION_COMMAND_PROMPT_INTERACT (needs: u"Need(method='role', value=u'plugin_action_command_prompt_interact')")
2020-12-28 21:39:28,456 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_READ (needs: u"Need(method='role', value=u'plugin_announcements_read')")
2020-12-28 21:39:28,457 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_MANAGE (needs: u"Need(method='role', value=u'plugin_announcements_manage'), Need(method='role', value=u'plugin_announcements_read')")
2020-12-28 21:39:28,458 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_ADMIN (needs: u"Need(method='role', value=u'plugin_appkeys_admin')")
2020-12-28 21:39:28,460 - octoprint.server - INFO - Added new permission from plugin backup: PLUGIN_BACKUP_ACCESS (needs: u"Need(method='role', value=u'plugin_backup_access')")
2020-12-28 21:39:28,461 - octoprint.server - INFO - Added new permission from plugin dashboard: PLUGIN_DASHBOARD_ADMIN (needs: u"Need(method='role', value=u'plugin_dashboard_admin')")
2020-12-28 21:39:28,462 - octoprint.server - INFO - Added new permission from plugin firmware_check: PLUGIN_FIRMWARE_CHECK_DISPLAY (needs: u"Need(method='role', value=u'plugin_firmware_check_display')")
2020-12-28 21:39:28,463 - octoprint.server - INFO - Added new permission from plugin logging: PLUGIN_LOGGING_MANAGE (needs: u"Need(method='role', value=u'plugin_logging_manage')")
2020-12-28 21:39:28,465 - octoprint.server - INFO - Added new permission from plugin pi_support: PLUGIN_PI_SUPPORT_STATUS (needs: u"Need(method='role', value=u'plugin_pi_support_check')")
2020-12-28 21:39:28,466 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_MANAGE (needs: u"Need(method='role', value=u'plugin_pluginmanager_manage')")
2020-12-28 21:39:28,467 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_INSTALL (needs: u"Need(method='role', value=u'plugin_pluginmanager_install'), Need(method='role', value=u'plugin_pluginmanager_manage')")
2020-12-28 21:39:28,469 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CHECK (needs: u"Need(method='role', value=u'plugin_softwareupdate_check')")
2020-12-28 21:39:28,470 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_UPDATE (needs: u"Need(method='role', value=u'plugin_softwareupdate_update')")
2020-12-28 21:39:28,470 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CONFIGURE (needs: u"Need(method='role', value=u'plugin_softwareupdate_configure')")
2020-12-28 21:39:28,484 - octoprint.printer.standard - INFO - Using print time estimator provided by PrintTimeGenius
2020-12-28 21:39:28,785 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk
2020-12-28 21:39:28,841 - octoprint.plugins.excluderegion - INFO - Logging mode set to 'octoprint'
2020-12-28 21:39:28,844 - octoprint.plugins.excluderegion - INFO - Setting update detected: g90InfluencesExtruder=False, clearRegionsAfterPrintFinishes=False, mayShrinkRegionsWhilePrinting=False, loggingMode=octoprint, enteringExcludedRegionGcode=None, exitingExcludedRegionGcode=None, extendedExcludeGcodes={'M73': {"gcode": "M73", "type": "ExcludedGcode", "mode": "merge", "description": "Suppress progress updates while excluding and output the most recent progress values encountered when exiting the excluded area"}, 'M117': {"gcode": "M117", "type": "ExcludedGcode", "mode": "last", "description": "Suppress display messages while excluding and output the last message encountered when exiting the excluded area"}, 'G4': {"gcode": "G4", "type": "ExcludedGcode", "mode": "exclude", "description": "Ignore all dwell commands in an excluded area to reduce delays while excluding"}, 'M205': {"gcode": "M205", "type": "ExcludedGcode", "mode": "merge", "description": "Record advanced setting changes while excluding and apply the most recent values in a single command after exiting the excluded area"}, 'M204': {"gcode": "M204", "type": "ExcludedGcode", "mode": "merge", "description": "Record default acceleration changes while excluding and apply the most recent values in a single command after exiting the excluded area"}}, atCommandActions={'ExcludeRegion': [{"action": "enable_exclusion", "type": "AtCommandAction", "command": "ExcludeRegion", "parameterPattern": "^\\s*(enable|on)(\\s|$)", "description": "Default action to enable exclusion"}, {"action": "disable_exclusion", "type": "AtCommandAction", "command": "ExcludeRegion", "parameterPattern": "^\\s*(disable|off)(\\s|$)", "description": "Default action to disable exclusion"}]}
2020-12-28 21:39:29,605 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python2 -m pip" as command to invoke pip
2020-12-28 21:39:30,209 - octoprint.util.pip - INFO - Version of pip is 19.3.1
2020-12-28 21:39:30,211 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python2.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes
2020-12-28 21:39:30,211 - octoprint.util.pip - INFO - ==> pip ok -> yes
2020-12-28 21:39:30,220 - octoprint.plugin.core - INFO - Initialized 33 plugin implementation(s)
2020-12-28 21:39:30,248 - octoprint.plugin.core - INFO - 33 plugin(s) registered with the system:
|  ABL Expert Plugin (0.6) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_ABL_Expert
|  Action Command Notification Support (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/action_command_notification
|  Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/action_command_prompt
|  Announcement Plugin (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/announcements
|  Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/tracking
|  Application Keys Plugin (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/appkeys
|  Backup & Restore (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/backup
|  Bed Visualizer (1.0.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_bedlevelvisualizer
|  BetterHeaterTimeout (1.3.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_BetterHeaterTimeout
|  BLTouch Plugin (0.3.4) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_BLTouch
|  Change Filament Plugin (0.3.1) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_Change_Filament
|  Core Wizard (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/corewizard
|  Dashboard (1.16.3) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_dashboard
|  Detailed Progress (0.2.6) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_detailedprogress
|  Discovery (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/discovery
|  DisplayLayerProgress Plugin (1.24.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_DisplayLayerProgress
|  Enclosure Plugin (4.13.1) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_enclosure
|  Error Tracking (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/errortracking
|  Exclude Region (0.3.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_excluderegion
|  File Check (2020.8.7) (bundled) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_file_check
|  Firmware Check (2020.9.23) (bundled) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_firmware_check
|  Floating Navbar (0.3.4) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_floatingnavbar
|  GCode Viewer (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/gcodeviewer
|  ipOnConnect (0.2.4) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_ipOnConnect
|  Logging (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/logging
|  Navbar Temperature Plugin (0.14) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_navbartemp
|  Octolapse (0.4.1) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_octolapse
|  Pi Support Plugin (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/pi_support
|  Plugin Manager (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/pluginmanager
|  PrintTimeGenius Plugin (2.2.7) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_PrintTimeGenius
|  Sidebar Webcam (0.1.8) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_webcamSB
|  Software Update (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/softwareupdate
|  Virtual Printer (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/virtual_printer
Prefix legend: ! = disabled, # = blacklisted, * = incompatible
2020-12-28 21:39:30,276 - octoprint.environment - INFO - Detected environment is Python 2.7.16 under Linux (linux2). Details:
|  hardware:
|      cores: 4
|      freq: 1500.0
|      ram: 4041732096
|  os:
|      bits: 32
|      id: linux
|      platform: linux2
|  plugins:
|      pi_support:
|          model: Raspberry Pi 4 Model B Rev 1.1
|          octopi_version: 0.17.0
|          throttle_state: '0x0'
|  python:
|      pip: 19.3.1
|      version: 2.7.16
|      virtualenv: /home/pi/oprint
2020-12-28 21:39:30,289 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/webassets...
2020-12-28 21:39:30,312 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-cache...
2020-12-28 21:39:31,521 - octoprint.server - INFO - Shutting down intermediary server...
2020-12-28 21:39:31,652 - octoprint.server - INFO - Intermediary server shut down
2020-12-28 21:39:31,653 - octoprint.events - INFO - Processing startup event, this is our first event
2020-12-28 21:39:31,654 - octoprint.events - INFO - Adding 1 events to queue that were held back before startup event
2020-12-28 21:39:31,660 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue...
2020-12-28 21:39:31,660 - octoprint.server - INFO - Autoconnect on startup is configured, trying to connect to the printer...
2020-12-28 21:39:31,686 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue
2020-12-28 21:39:31,697 - octoprint.server - INFO - Trying to connect to configured serial port /dev/ttyUSB0
2020-12-28 21:39:31,738 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection"
2020-12-28 21:39:31,743 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 7 port/baudrate candidates: /dev/ttyUSB0@115200, /dev/ttyUSB0@250000, /dev/ttyUSB0@230400, /dev/ttyUSB0@57600, /dev/ttyUSB0@38400, /dev/ttyUSB0@19200, /dev/ttyUSB0@9600
2020-12-28 21:39:31,744 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder...
2020-12-28 21:39:31,748 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200
2020-12-28 21:39:31,749 - octoprint.server.util.watchdog - INFO - ... initial scan done.
2020-12-28 21:39:31,751 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200
2020-12-28 21:39:31,818 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s
2020-12-28 21:39:31,823 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2020-12-28 21:39:33,195 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on octopi._http._tcp.local.' for _http._tcp.local.
2020-12-28 21:39:34,013 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on octopi._octoprint._tcp.local.' for _octoprint._tcp.local.
2020-12-28 21:39:34,022 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance on octopi for SSDP
2020-12-28 21:39:34,105 - octoprint.server - INFO - Listening on http://127.0.0.1:5000
2020-12-28 21:39:34,131 - octoprint.plugins.announcements - INFO - Looks like we are offline, can't fetch announcements for channel _important from network
2020-12-28 21:39:34,139 - octoprint.plugins.announcements - INFO - Looks like we are offline, can't fetch announcements for channel _releases from network
2020-12-28 21:39:34,143 - octoprint.plugins.announcements - INFO - Looks like we are offline, can't fetch announcements for channel _blog from network
2020-12-28 21:39:34,197 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid
2020-12-28 21:39:34,197 - octoprint.plugins.announcements - INFO - Looks like we are offline, can't fetch announcements for channel _plugins from network
2020-12-28 21:39:34,399 - octoprint.plugins.announcements - INFO - Looks like we are offline, can't fetch announcements for channel _octopi from network
2020-12-28 21:39:34,909 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s
2020-12-28 21:39:34,945 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python2 -m pip" as command to invoke pip
2020-12-28 21:39:34,975 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python2.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes
2020-12-28 21:39:35,044 - octoprint.util.pip - INFO - ==> pip ok -> yes
2020-12-28 21:39:35,070 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2020-12-28 21:39:35,073 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 54.0GB. That is considered sufficient for updating.
2020-12-28 21:39:35,168 - octoprint.plugins.softwareupdate - INFO - Not fetching check overlays, we are offline
2020-12-28 21:39:35,180 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid
2020-12-28 21:39:35,630 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity changed from offline to online
2020-12-28 21:39:35,716 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid
2020-12-28 21:39:35,724 - octoprint.plugins.ipOnConnect - INFO - ipOnConnectPlugin: M117 192.168.0.116
2020-12-28 21:39:36,172 - octoprint.plugins.announcements - INFO - Loaded channel _important from https://octoprint.org/feeds/important.xml in 0.52s
2020-12-28 21:39:36,754 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid
2020-12-28 21:39:37,052 - octoprint.plugins.announcements - INFO - Loaded channel _releases from https://octoprint.org/feeds/releases.xml in 0.18s
2020-12-28 21:39:37,083 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s
2020-12-28 21:39:37,101 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2020-12-28 21:39:37,285 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python2 -m pip" as command to invoke pip
2020-12-28 21:39:37,286 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python2.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes
2020-12-28 21:39:37,287 - octoprint.util.pip - INFO - ==> pip ok -> yes
2020-12-28 21:39:37,388 - octoprint.plugins.announcements - INFO - Loaded channel _blog from https://octoprint.org/feeds/octoblog.xml in 0.29s
2020-12-28 21:39:37,391 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk
2020-12-28 21:39:37,437 - octoprint.plugins.bedlevelvisualizer - INFO - OctoPrint-BedLevelVisualizer loaded!
2020-12-28 21:39:37,439 - octoprint.plugins.dashboard - INFO - Dashboard started
2020-12-28 21:39:37,442 - octoprint.plugins.detailedprogress - INFO - OctoPrint-DetailedProgress loaded!
2020-12-28 21:39:37,449 - octoprint.plugins.ipOnConnect - INFO - ipOnConnectPlugin: M117 192.168.0.116
2020-12-28 21:39:37,453 - octoprint.plugins.webcamSB - INFO - Sidebar Webcam LOADED
2020-12-28 21:39:37,723 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 11}
2020-12-28 21:39:37,747 - octoprint.plugins.announcements - INFO - Loaded channel _plugins from https://plugins.octoprint.org/feed.xml in 0.31s
2020-12-28 21:39:37,859 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'query_string': 'l10n=en', 'path': '/', 'base_url': 'http://192.168.0.116/'}
2020-12-28 21:39:37,975 - octoprint.plugins.tracking - INFO - Sent tracking event pong, payload: {u'python': '2.7.16', u'os': u'linux', u'ram': 4041732096L, u'octopi_version': u'0.17.0', u'version': u'1.5.2', u'plugins': u'displaylayerprogress:1.24.0,bltouch:0.3.4,iponconnect:0.2.4,betterheatertimeout:1.3.0,abl_expert:0.6,enclosure:4.13.1,webcamsb:0.1.8,bedlevelvisualizer:1.0.0,detailedprogress:0.2.6,navbartemp:0.14,change_filament:0.3.1,excluderegion:0.3.0,dashboard:1.16.3,floatingnavbar:0.3.4,printtimegenius:2.2.7,octolapse:0.4.1', u'pip': '19.3.1', u'cores': 4, u'freq': 1500.0, u'pi_model': u'Raspberry Pi 4 Model B Rev 1.1', u'bits': 32}
2020-12-28 21:39:38,020 - octoprint.plugins.announcements - INFO - Loaded channel _octopi from https://octoprint.org/feeds/octopi.xml in 0.2s
2020-12-28 21:39:38,159 - octoprint.plugins.tracking - INFO - Sent tracking event startup, payload: {u'python': '2.7.16', u'os': u'linux', u'ram': 4041732096L, u'octopi_version': u'0.17.0', u'version': u'1.5.2', u'pip': '19.3.1', u'cores': 4, u'freq': 1500.0, u'pi_model': u'Raspberry Pi 4 Model B Rev 1.1', u'bits': 32}
2020-12-28 21:39:39,122 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 250000
2020-12-28 21:39:39,131 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s
2020-12-28 21:39:39,189 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2020-12-28 21:39:40,846 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s
2020-12-28 21:39:40,850 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2020-12-28 21:39:42,996 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s
2020-12-28 21:39:43,003 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2020-12-28 21:39:45,060 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 230400
2020-12-28 21:39:45,169 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s
2020-12-28 21:39:45,176 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2020-12-29 06:56:33,546 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2020-12-29 06:56:33,673 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s
2020-12-29 06:56:33,691 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2020-12-29 06:56:34,355 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 19}
2020-12-29 06:56:35,681 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s
2020-12-29 06:56:35,693 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2020-12-29 06:56:37,269 - octoprint.server.preemptive_cache - INFO - ... done in 11.55s
2020-12-29 06:56:37,750 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 57600
2020-12-29 06:56:37,754 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s
2020-12-29 06:56:37,757 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2020-12-29 06:56:39,763 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s
2020-12-29 06:56:39,771 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2020-12-29 06:56:41,781 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s
2020-12-29 06:56:41,788 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2020-12-29 06:56:43,790 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 38400
2020-12-29 06:56:43,796 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s
2020-12-29 06:56:43,803 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2020-12-29 06:56:45,807 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s
2020-12-29 06:56:45,817 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2020-12-29 06:56:47,822 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s
2020-12-29 06:56:47,831 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2020-12-29 06:56:49,835 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 19200
2020-12-29 06:56:49,843 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s
2020-12-29 06:56:49,850 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2020-12-29 06:56:51,854 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s
2020-12-29 06:56:51,863 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2020-12-29 06:56:53,869 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s
2020-12-29 06:56:53,878 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2020-12-29 06:56:55,881 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 9600
2020-12-29 06:56:55,887 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s
2020-12-29 06:56:55,894 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2020-12-29 06:56:57,897 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s
2020-12-29 06:56:57,906 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2020-12-29 06:56:59,909 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s
2020-12-29 06:56:59,918 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2020-12-29 06:57:01,921 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Error: No more candidates to test, and no working port/baudrate combination detected."
2020-12-29 06:57:01,941 - octoprint.util.comm - INFO - Changing monitoring state from "Error: No more candidates to test, and no working port/baudrate combination detected." to "Offline (Error: No more candidates to test, and no working port/baudrate combination detected.)"
2020-12-29 06:57:02,009 - octoprint.plugins.excluderegion - INFO - Printing stopped: event=Error
2020-12-29 06:57:02,016 - octoprint.plugins.action_command_notification - INFO - Notifications cleared
2020-12-29 06:57:02,190 - octoprint.plugins.tracking - INFO - Sent tracking event commerror_autodetect, payload: {u'commerror_text': u'No more candidates to test, and no working port/baudrate combination detected.'}
2020-12-29 06:57:15,868 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.0.101
2020-12-29 06:58:05,753 - octoprint.access.users - INFO - Logged in user: GeoJdk
2020-12-29 06:58:05,757 - octoprint.server.api - INFO - Actively logging in user GeoJdk from ::ffff:192.168.0.101
2020-12-29 06:58:05,830 - octoprint.server.util.flask - INFO - Passively logging in user GeoJdk from ::ffff:192.168.0.101
2020-12-29 06:58:05,830 - octoprint.access.users - INFO - Logged in user: GeoJdk
2020-12-29 06:58:05,889 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.0.101
2020-12-29 06:58:06,707 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.0.101
2020-12-29 06:58:06,742 - octoprint.server.util.flask - INFO - Passively logging in user GeoJdk from ::ffff:192.168.0.101
2020-12-29 06:58:06,743 - octoprint.access.users - INFO - Logged in user: GeoJdk
2020-12-29 06:58:07,004 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json
2020-12-29 06:58:14,443 - octoprint.plugins.pluginmanager - INFO - Loaded plugin notices data from https://plugins.octoprint.org/notices.json
2020-12-29 06:58:15,640 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk
2020-12-29 06:58:15,948 - octoprint.server.util.sockjs - INFO - User GeoJdk logged in on the socket from client ::ffff:192.168.0.101
2020-12-29 06:59:07,511 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection"
2020-12-29 06:59:07,611 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 7 port/baudrate candidates: /dev/ttyUSB0@115200, /dev/ttyUSB0@250000, /dev/ttyUSB0@230400, /dev/ttyUSB0@57600, /dev/ttyUSB0@38400, /dev/ttyUSB0@19200, /dev/ttyUSB0@9600
2020-12-29 06:59:07,617 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200
2020-12-29 06:59:07,620 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200
2020-12-29 06:59:07,645 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s
2020-12-29 06:59:07,648 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2020-12-29 06:59:10,729 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s
2020-12-29 06:59:10,744 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2020-12-29 06:59:12,751 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s
2020-12-29 06:59:12,766 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2020-12-29 06:59:14,707 - octoprint.util.comm - WARNING - Received line:
2020-12-29 06:59:14,708 - octoprint.util.comm - WARNING - | ñNp|4b6ênIž0JpCF"›J5r=>|QT&ɾn“:’Xš@áBŸfðJ\x00>“M“7—ð!“&“øùB“6zS.ôCA'—0^ÿKДJ’%øaÁMhB¸køeÁAhñApp"EP:—P.`“tt4QfñJ”B€@ñ“@X&váB(\û8JØ0ўpCî2"6XBômÉ<p|,þJžBÿB’J%˜\x00C”@ñ*6\x00éN>`}ÙjváBœJô%HBü%PJö”Ip%Ivá
2020-12-29 06:59:14,711 - octoprint.util.comm - WARNING - The received line contains at least one null byte character at position 53, this hints at some data corruption going on
2020-12-29 06:59:16,759 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 250000
2020-12-29 06:59:16,773 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s
2020-12-29 06:59:16,779 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2020-12-29 06:59:17,847 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Operational"
2020-12-29 06:59:17,863 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2020-12-29 06:59:18,002 - octoprint.plugins.ipOnConnect - INFO - ipOnConnectPlugin: M117 192.168.0.116
2020-12-29 06:59:18,017 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin bugfix-2.0.x (GitHub)"
2020-12-29 06:59:18,044 - octoprint.plugins.ABL_Expert - INFO - self.printer_cap[eeprom] is now 1

2020-12-29 06:59:18,060 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting
2020-12-29 06:59:18,068 - octoprint.plugins.ABL_Expert - INFO - self.printer_cap[autolevel] is now 1

2020-12-29 06:59:18,072 - octoprint.plugins.ABL_Expert - INFO - self.printer_cap[z_probe] is now 1

2020-12-29 06:59:18,076 - octoprint.plugins.ABL_Expert - INFO - self.printer_cap[leveling_data] is now 1

2020-12-29 06:59:18,168 - octoprint.plugins.ABL_Expert - INFO - Grid mesh size is 4
2020-12-29 06:59:18,186 - octoprint.plugins.ABL_Expert - INFO - Grid mesh size is 10
2020-12-29 06:59:18,224 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {u'printer_baudrate': 0, u'printer_port': u'/dev/ttyUSB0', u'firmware_name': u'Marlin bugfix-2.0.x (GitHub)'}
2020-12-29 07:11:33,547 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2020-12-29 07:11:33,831 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 919}
2020-12-29 07:26:33,550 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2020-12-29 07:26:33,853 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 1819}
2020-12-29 07:41:33,553 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2020-12-29 07:41:33,829 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 2719}
2020-12-29 07:53:50,662 - octoprint.plugins.excluderegion - INFO - Setting update detected: g90InfluencesExtruder=False, clearRegionsAfterPrintFinishes=False, mayShrinkRegionsWhilePrinting=False, loggingMode=octoprint, enteringExcludedRegionGcode=None, exitingExcludedRegionGcode=None, extendedExcludeGcodes={'M73': {"gcode": "M73", "type": "ExcludedGcode", "mode": "merge", "description": "Suppress progress updates while excluding and output the most recent progress values encountered when exiting the excluded area"}, 'M117': {"gcode": "M117", "type": "ExcludedGcode", "mode": "last", "description": "Suppress display messages while excluding and output the last message encountered when exiting the excluded area"}, 'G4': {"gcode": "G4", "type": "ExcludedGcode", "mode": "exclude", "description": "Ignore all dwell commands in an excluded area to reduce delays while excluding"}, 'M205': {"gcode": "M205", "type": "ExcludedGcode", "mode": "merge", "description": "Record advanced setting changes while excluding and apply the most recent values in a single command after exiting the excluded area"}, 'M204': {"gcode": "M204", "type": "ExcludedGcode", "mode": "merge", "description": "Record default acceleration changes while excluding and apply the most recent values in a single command after exiting the excluded area"}}, atCommandActions={'ExcludeRegion': [{"action": "enable_exclusion", "type": "AtCommandAction", "command": "ExcludeRegion", "parameterPattern": "^\\s*(enable|on)(\\s|$)", "description": "Default action to enable exclusion"}, {"action": "disable_exclusion", "type": "AtCommandAction", "command": "ExcludeRegion", "parameterPattern": "^\\s*(disable|off)(\\s|$)", "description": "Default action to disable exclusion"}]}
2020-12-29 07:54:09,693 - octoprint - ERROR - Exception on /plugin/octolapse/rendering/font [GET]
Traceback (most recent call last):
  File "/home/pi/oprint/local/lib/python2.7/site-packages/flask/app.py", line 2447, in wsgi_app
    response = self.full_dispatch_request()
  File "/home/pi/oprint/local/lib/python2.7/site-packages/flask/app.py", line 1952, in full_dispatch_request
    rv = self.handle_user_exception(e)
  File "/home/pi/oprint/local/lib/python2.7/site-packages/flask/app.py", line 1821, in handle_user_exception
    reraise(exc_type, exc_value, tb)
  File "/home/pi/oprint/local/lib/python2.7/site-packages/flask/app.py", line 1950, in full_dispatch_request
    rv = self.dispatch_request()
  File "/home/pi/oprint/local/lib/python2.7/site-packages/flask/app.py", line 1936, in dispatch_request
    return self.view_functions[rule.endpoint](**req.view_args)
  File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/server/util/flask.py", line 1516, in decorated_view
    return no_firstrun_access(flask_login.login_required(func))(*args, **kwargs)
  File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint/server/util/flask.py", line 1539, in decorated_view
    return func(*args, **kwargs)
  File "/home/pi/oprint/local/lib/python2.7/site-packages/flask_login/utils.py", line 272, in decorated_view
    return func(*args, **kwargs)
  File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_octolapse/__init__.py", line 1550, in get_available_fonts
    font_list = utility.get_system_fonts(self._basefolder)
  File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_octolapse/utility.py", line 663, in get_system_fonts
    linux_font_paths = str(subprocess.check_output(["fc-list", "--format", "%{file}\n"]), 'UTF-8').split('\n')
TypeError: str() takes at most 1 argument (2 given)
2020-12-29 07:54:09,716 - tornado.access - ERROR - 500 GET /plugin/octolapse/rendering/font (::ffff:192.168.0.101) 144.05ms
2020-12-29 07:55:22,279 - octoprint.plugins.DisplayLayerProgress - INFO - FilePreProcessor. Checking LayerExpressions.
2020-12-29 07:55:22,279 - octoprint.plugins.DisplayLayerProgress - INFO - FilePreProcessor. LayerExpression valid. Start processing...
2020-12-29 07:55:22,988 - octoprint.filemanager.analysis - INFO - Starting analysis of local:dice.gcode
2020-12-29 07:55:23,161 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile
2020-12-29 07:55:23,295 - octoprint.plugins.DisplayLayerProgress - INFO - Read total height from MetaFile
2020-12-29 07:55:23,298 - octoprint.plugins.DisplayLayerProgress - INFO - Total height not found in MetaFile
2020-12-29 07:55:24,294 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile
2020-12-29 07:55:24,430 - octoprint.filemanager.analysis - INFO - Analysis of entry local:dice.gcode finished, needed 1.44s
2020-12-29 07:55:24,456 - octoprint.plugins.DisplayLayerProgress - INFO - Read total height from MetaFile
2020-12-29 07:55:24,592 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile
2020-12-29 07:55:24,711 - octoprint.plugins.DisplayLayerProgress - INFO - Read total height from MetaFile
2020-12-29 07:55:36,988 - octoprint.printer.standard.job - INFO - Print job selected - origin: local, path: dice.gcode, owner: GeoJdk, user: GeoJdk
2020-12-29 07:55:37,010 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting"
2020-12-29 07:55:37,011 - octoprint.plugins.DisplayLayerProgress - INFO - File '/home/pi/.octoprint/uploads/dice.gcode' selected. Determining number of layers.
2020-12-29 07:55:37,019 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: dice.gcode, owner: GeoJdk, user: GeoJdk
2020-12-29 07:55:37,051 - octoprint.plugins.DisplayLayerProgress - INFO - Read total height from MetaFile
2020-12-29 07:55:37,506 - octoprint.util.comm - INFO - Cancelling job on behalf of plugin octolapse
2020-12-29 07:55:37,517 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Cancelling"
2020-12-29 07:55:37,523 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile
2020-12-29 07:55:37,559 - octoprint.printer.standard.job - INFO - Print job cancelled - origin: local, path: dice.gcode, owner: GeoJdk, user: None
2020-12-29 07:55:37,685 - octoprint.plugins.DisplayLayerProgress - INFO - File select-event processing done!'
2020-12-29 07:55:37,687 - octoprint.plugins.excluderegion - INFO - File selected, resetting internal state
2020-12-29 07:55:37,814 - octoprint.util.comm - INFO - Changing monitoring state from "Cancelling" to "Printing"
2020-12-29 07:55:37,820 - octoprint.plugins.DisplayLayerProgress - INFO - Printing started. Detailed progress started.{u'origin': u'local', u'name': u'dice.gcode', u'user': 'GeoJdk', u'owner': 'GeoJdk', u'path': u'dice.gcode', u'size': 1071759L}
2020-12-29 07:55:37,839 - octoprint.plugins.detailedprogress - INFO - Printing started. Detailed progress started.
2020-12-29 07:55:37,871 - octoprint.plugins.excluderegion - INFO - Printing started
2020-12-29 07:55:37,880 - octoprint.plugins.excluderegion - INFO - Printing stopped: event=PrintCancelling
2020-12-29 07:55:38,006 - octoprint.plugins.DisplayLayerProgress - INFO - Printing stopped. Detailed progress stopped.
2020-12-29 07:55:38,010 - octoprint.plugins.detailedprogress - INFO - Printing stopped. Detailed progress stopped.
2020-12-29 07:55:38,014 - octoprint.plugins.excluderegion - INFO - Printing stopped: event=PrintCancelled
2020-12-29 07:55:38,088 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Operational"
2020-12-29 07:55:38,097 - octoprint.plugins.tracking - INFO - Sent tracking event print_started, payload: {u'origin': u'local', u'file': '020932c69f958275972fda6aa8b041641cc4090b'}
2020-12-29 07:55:38,104 - octoprint.plugins.DisplayLayerProgress - INFO - Printing stopped. Detailed progress stopped.
2020-12-29 07:55:38,111 - octoprint.plugins.detailedprogress - INFO - Printing stopped. Detailed progress stopped.
2020-12-29 07:55:38,117 - octoprint.plugins.excluderegion - INFO - Printing stopped: event=PrintFailed
2020-12-29 07:55:38,130 - octoprint.plugins.ipOnConnect - INFO - ipOnConnectPlugin: M117 192.168.0.116
2020-12-29 07:55:38,324 - octoprint.plugins.tracking - INFO - Sent tracking event print_cancelled, payload: {u'origin': u'local', u'file': '020932c69f958275972fda6aa8b041641cc4090b'}
2020-12-29 07:55:38,505 - octoprint.plugins.tracking - INFO - Sent tracking event print_failed, payload: {u'origin': u'local', u'reason': u'cancelled', u'file': '020932c69f958275972fda6aa8b041641cc4090b'}
2020-12-29 07:56:33,554 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2020-12-29 07:56:33,836 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 3619}
2020-12-29 07:56:53,167 - octoprint.plugins.DisplayLayerProgress - INFO - FilePreProcessor. Checking LayerExpressions.
2020-12-29 07:56:53,168 - octoprint.plugins.DisplayLayerProgress - INFO - FilePreProcessor. LayerExpression valid. Start processing...
2020-12-29 07:56:53,909 - octoprint.filemanager.analysis - INFO - Starting analysis of local:dice.gcode
2020-12-29 07:56:54,009 - octoprint.printer.standard.job - INFO - Print job selected - origin: local, path: dice.gcode, owner: _api, user: _api
2020-12-29 07:56:54,064 - octoprint.plugins.DisplayLayerProgress - INFO - File '/home/pi/.octoprint/uploads/dice.gcode' selected. Determining number of layers.
2020-12-29 07:56:54,093 - octoprint.plugins.DisplayLayerProgress - INFO - Read total height from MetaFile
2020-12-29 07:56:54,102 - octoprint.plugins.DisplayLayerProgress - INFO - Total height not found in MetaFile
2020-12-29 07:56:54,389 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile
2020-12-29 07:56:54,578 - octoprint.plugins.DisplayLayerProgress - INFO - File select-event processing done!'
2020-12-29 07:56:54,588 - octoprint.plugins.excluderegion - INFO - File selected, resetting internal state
2020-12-29 07:56:54,603 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile
2020-12-29 07:56:54,710 - octoprint.plugins.DisplayLayerProgress - INFO - Read total height from MetaFile
2020-12-29 07:56:54,712 - octoprint.plugins.DisplayLayerProgress - INFO - Total height not found in MetaFile
2020-12-29 07:56:55,341 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile
2020-12-29 07:56:55,481 - octoprint.plugins.DisplayLayerProgress - INFO - Read total height from MetaFile
2020-12-29 07:56:55,521 - octoprint.filemanager.analysis - INFO - Analysis of entry local:dice.gcode finished, needed 1.61s
2020-12-29 07:56:55,651 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile
2020-12-29 07:56:55,761 - octoprint.plugins.DisplayLayerProgress - INFO - Read total height from MetaFile
2020-12-29 07:56:58,865 - octoprint.util.comm - INFO - Starting job on behalf of user GeoJdk
2020-12-29 07:56:58,867 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting"
2020-12-29 07:56:58,882 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: dice.gcode, owner: GeoJdk, user: GeoJdk
2020-12-29 07:56:59,001 - octoprint.plugins.DisplayLayerProgress - INFO - Printing started. Detailed progress started.{u'origin': u'local', u'name': u'dice.gcode', u'user': 'GeoJdk', u'owner': 'GeoJdk', u'path': u'dice.gcode', u'size': 1073779L}
2020-12-29 07:56:59,007 - octoprint.plugins.detailedprogress - INFO - Printing started. Detailed progress started.
2020-12-29 07:56:59,018 - octoprint.plugins.excluderegion - INFO - Printing started
2020-12-29 07:56:59,265 - octoprint.util.comm - INFO - Cancelling job on behalf of plugin octolapse
2020-12-29 07:56:59,268 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Cancelling"
2020-12-29 07:56:59,271 - octoprint.plugins.excluderegion - INFO - Printing stopped: event=PrintCancelling
2020-12-29 07:56:59,287 - octoprint.util.comm - INFO - Changing monitoring state from "Cancelling" to "Printing"
2020-12-29 07:56:59,296 - octoprint.printer.standard.job - INFO - Print job cancelled - origin: local, path: dice.gcode, owner: GeoJdk, user: None
2020-12-29 07:56:59,333 - octoprint.plugins.tracking - INFO - Sent tracking event print_started, payload: {u'origin': u'local', u'file': '020932c69f958275972fda6aa8b041641cc4090b'}
2020-12-29 07:56:59,340 - octoprint.plugins.DisplayLayerProgress - INFO - Printing stopped. Detailed progress stopped.
2020-12-29 07:56:59,348 - octoprint.plugins.detailedprogress - INFO - Printing stopped. Detailed progress stopped.
2020-12-29 07:56:59,355 - octoprint.plugins.excluderegion - INFO - Printing stopped: event=PrintCancelled
2020-12-29 07:56:59,530 - octoprint.plugins.DisplayLayerProgress - INFO - Printing stopped. Detailed progress stopped.
2020-12-29 07:56:59,539 - octoprint.plugins.detailedprogress - INFO - Printing stopped. Detailed progress stopped.
2020-12-29 07:56:59,544 - octoprint.plugins.excluderegion - INFO - Printing stopped: event=PrintFailed
2020-12-29 07:56:59,556 - octoprint.plugins.ipOnConnect - INFO - ipOnConnectPlugin: M117 192.168.0.116
2020-12-29 07:56:59,585 - octoprint.plugins.tracking - INFO - Sent tracking event print_cancelled, payload: {u'origin': u'local', u'file': '020932c69f958275972fda6aa8b041641cc4090b'}
2020-12-29 07:56:59,615 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Operational"
2020-12-29 07:56:59,859 - octoprint.plugins.tracking - INFO - Sent tracking event print_failed, payload: {u'origin': u'local', u'reason': u'cancelled', u'file': '020932c69f958275972fda6aa8b041641cc4090b'}
2020-12-29 07:57:47,153 - octoprint.plugins.DisplayLayerProgress - INFO - FilePreProcessor. Checking LayerExpressions.
2020-12-29 07:57:47,154 - octoprint.plugins.DisplayLayerProgress - INFO - FilePreProcessor. LayerExpression valid. Start processing...
2020-12-29 07:57:47,919 - octoprint.filemanager.analysis - INFO - Starting analysis of local:dice.gcode
2020-12-29 07:57:48,082 - octoprint.printer.standard.job - INFO - Print job selected - origin: local, path: dice.gcode, owner: _api, user: _api
2020-12-29 07:57:48,085 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile
2020-12-29 07:57:48,259 - octoprint.plugins.DisplayLayerProgress - INFO - Read total height from MetaFile
2020-12-29 07:57:48,274 - octoprint.plugins.DisplayLayerProgress - INFO - File '/home/pi/.octoprint/uploads/dice.gcode' selected. Determining number of layers.
2020-12-29 07:57:48,297 - octoprint.plugins.DisplayLayerProgress - INFO - Read total height from MetaFile
2020-12-29 07:57:48,303 - octoprint.plugins.DisplayLayerProgress - INFO - Total height not found in MetaFile
2020-12-29 07:57:48,664 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile
2020-12-29 07:57:48,784 - octoprint.plugins.DisplayLayerProgress - INFO - File select-event processing done!'
2020-12-29 07:57:48,785 - octoprint.plugins.excluderegion - INFO - File selected, resetting internal state
2020-12-29 07:57:49,425 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile
2020-12-29 07:57:49,505 - octoprint.filemanager.analysis - INFO - Analysis of entry local:dice.gcode finished, needed 1.58s
2020-12-29 07:57:49,594 - octoprint.plugins.DisplayLayerProgress - INFO - Read total height from MetaFile
2020-12-29 07:57:49,700 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile
2020-12-29 07:57:49,823 - octoprint.plugins.DisplayLayerProgress - INFO - Read total height from MetaFile
2020-12-29 07:57:53,197 - octoprint.util.comm - INFO - Starting job on behalf of user GeoJdk
2020-12-29 07:57:53,199 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting"
2020-12-29 07:57:53,211 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: dice.gcode, owner: GeoJdk, user: GeoJdk
2020-12-29 07:57:53,329 - octoprint.plugins.DisplayLayerProgress - INFO - Printing started. Detailed progress started.{u'origin': u'local', u'name': u'dice.gcode', u'user': 'GeoJdk', u'owner': 'GeoJdk', u'path': u'dice.gcode', u'size': 1073678L}
2020-12-29 07:57:53,336 - octoprint.plugins.detailedprogress - INFO - Printing started. Detailed progress started.
2020-12-29 07:57:53,347 - octoprint.plugins.excluderegion - INFO - Printing started
2020-12-29 07:57:53,660 - octoprint.plugins.tracking - INFO - Sent tracking event print_started, payload: {u'origin': u'local', u'file': '020932c69f958275972fda6aa8b041641cc4090b'}
2020-12-29 07:58:02,382 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2020-12-29 07:58:02,400 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Printing"
2020-12-29 07:58:04,533 - octoprint.util.comm - INFO - Printer seems to support the busy protocol, will adjust timeouts and set busy interval accordingly
2020-12-29 07:59:50,990 - octoprint.util.comm - INFO - Telling the printer to set the busy interval to our "communicationBusy" timeout - 1s = 2s
2020-12-29 08:02:47,699 - octoprint.plugins.ABL_Expert - INFO - Grid mesh size is 4
2020-12-29 08:02:47,823 - octoprint.plugins.ABL_Expert - INFO - Grid mesh size is 10
2020-12-29 08:11:33,557 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2020-12-29 08:11:33,848 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 4519}
2020-12-29 08:14:41,548 - octoprint.util.comm - INFO - Cancelling job on behalf of user GeoJdk
2020-12-29 08:14:41,557 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Cancelling"
2020-12-29 08:14:41,562 - octoprint.plugins.excluderegion - INFO - Printing stopped: event=PrintCancelling
2020-12-29 08:14:41,573 - octoprint.printer.standard.job - INFO - Print job cancelled - origin: local, path: dice.gcode, owner: GeoJdk, user: GeoJdk
2020-12-29 08:14:41,666 - octoprint.plugins.DisplayLayerProgress - INFO - Printing stopped. Detailed progress stopped.
2020-12-29 08:14:41,702 - octoprint.plugins.detailedprogress - INFO - Printing stopped. Detailed progress stopped.
2020-12-29 08:14:41,717 - octoprint.plugins.excluderegion - INFO - Printing stopped: event=PrintCancelled
2020-12-29 08:14:41,889 - octoprint.plugins.DisplayLayerProgress - INFO - Printing stopped. Detailed progress stopped.
2020-12-29 08:14:41,894 - octoprint.plugins.detailedprogress - INFO - Printing stopped. Detailed progress stopped.
2020-12-29 08:14:41,898 - octoprint.plugins.excluderegion - INFO - Printing stopped: event=PrintFailed
2020-12-29 08:14:41,917 - octoprint.plugins.ipOnConnect - INFO - ipOnConnectPlugin: M117 192.168.0.116
2020-12-29 08:14:41,937 - octoprint.plugins.tracking - INFO - Sent tracking event print_cancelled, payload: {u'origin': u'local', u'file': '020932c69f958275972fda6aa8b041641cc4090b', u'elapsed': 1008}
2020-12-29 08:14:42,145 - octoprint.util.comm - INFO - Changing monitoring state from "Cancelling" to "Operational"
2020-12-29 08:14:42,157 - octoprint.plugins.tracking - INFO - Sent tracking event print_failed, payload: {u'origin': u'local', u'reason': u'cancelled', u'file': '020932c69f958275972fda6aa8b041641cc4090b', u'elapsed': 1008}
2020-12-29 08:21:49,624 - octoprint.plugins.excluderegion - INFO - Setting update detected: g90InfluencesExtruder=False, clearRegionsAfterPrintFinishes=False, mayShrinkRegionsWhilePrinting=False, loggingMode=octoprint, enteringExcludedRegionGcode=None, exitingExcludedRegionGcode=None, extendedExcludeGcodes={'M73': {"gcode": "M73", "type": "ExcludedGcode", "mode": "merge", "description": "Suppress progress updates while excluding and output the most recent progress values encountered when exiting the excluded area"}, 'M117': {"gcode": "M117", "type": "ExcludedGcode", "mode": "last", "description": "Suppress display messages while excluding and output the last message encountered when exiting the excluded area"}, 'G4': {"gcode": "G4", "type": "ExcludedGcode", "mode": "exclude", "description": "Ignore all dwell commands in an excluded area to reduce delays while excluding"}, 'M205': {"gcode": "M205", "type": "ExcludedGcode", "mode": "merge", "description": "Record advanced setting changes while excluding and apply the most recent values in a single command after exiting the excluded area"}, 'M204': {"gcode": "M204", "type": "ExcludedGcode", "mode": "merge", "description": "Record default acceleration changes while excluding and apply the most recent values in a single command after exiting the excluded area"}}, atCommandActions={'ExcludeRegion': [{"action": "enable_exclusion", "type": "AtCommandAction", "command": "ExcludeRegion", "parameterPattern": "^\\s*(enable|on)(\\s|$)", "description": "Default action to enable exclusion"}, {"action": "disable_exclusion", "type": "AtCommandAction", "command": "ExcludeRegion", "parameterPattern": "^\\s*(disable|off)(\\s|$)", "description": "Default action to disable exclusion"}]}
2020-12-29 08:21:56,313 - octoprint.util.comm - INFO - Starting job on behalf of user GeoJdk
2020-12-29 08:21:56,324 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting"
2020-12-29 08:21:56,343 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: dice.gcode, owner: GeoJdk, user: GeoJdk
2020-12-29 08:21:56,447 - octoprint.plugins.DisplayLayerProgress - INFO - Printing started. Detailed progress started.{u'origin': u'local', u'name': u'dice.gcode', u'user': 'GeoJdk', u'owner': 'GeoJdk', u'path': u'dice.gcode', u'size': 1073678L}
2020-12-29 08:21:56,464 - octoprint.plugins.detailedprogress - INFO - Printing started. Detailed progress started.
2020-12-29 08:21:56,479 - octoprint.plugins.excluderegion - INFO - Printing started
2020-12-29 08:21:56,773 - octoprint.plugins.tracking - INFO - Sent tracking event print_started, payload: {u'origin': u'local', u'file': '020932c69f958275972fda6aa8b041641cc4090b'}
2020-12-29 08:22:03,176 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2020-12-29 08:22:03,184 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Printing"
2020-12-29 08:26:28,694 - octoprint.plugins.ABL_Expert - INFO - Grid mesh size is 4
2020-12-29 08:26:28,819 - octoprint.plugins.ABL_Expert - INFO - Grid mesh size is 10
2020-12-29 08:26:33,560 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2020-12-29 08:26:33,832 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 5419}
2020-12-29 08:41:33,565 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2020-12-29 08:41:33,847 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 6319}
2020-12-29 08:47:17,912 - octoprint.util.comm - INFO - Cancelling job on behalf of user GeoJdk
2020-12-29 08:47:17,919 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Cancelling"
2020-12-29 08:47:17,935 - octoprint.plugins.excluderegion - INFO - Printing stopped: event=PrintCancelling
2020-12-29 08:47:17,937 - octoprint.printer.standard.job - INFO - Print job cancelled - origin: local, path: dice.gcode, owner: GeoJdk, user: GeoJdk
2020-12-29 08:47:18,084 - octoprint.plugins.DisplayLayerProgress - INFO - Printing stopped. Detailed progress stopped.
2020-12-29 08:47:18,102 - octoprint.plugins.detailedprogress - INFO - Printing stopped. Detailed progress stopped.
2020-12-29 08:47:18,107 - octoprint.plugins.excluderegion - INFO - Printing stopped: event=PrintCancelled
2020-12-29 08:47:18,342 - octoprint.util.comm - INFO - Changing monitoring state from "Cancelling" to "Operational"
2020-12-29 08:47:18,348 - octoprint.plugins.tracking - INFO - Sent tracking event print_cancelled, payload: {u'origin': u'local', u'file': '020932c69f958275972fda6aa8b041641cc4090b', u'elapsed': 1521}
2020-12-29 08:47:18,351 - octoprint.plugins.DisplayLayerProgress - INFO - Printing stopped. Detailed progress stopped.
2020-12-29 08:47:18,364 - octoprint.plugins.detailedprogress - INFO - Printing stopped. Detailed progress stopped.
2020-12-29 08:47:18,370 - octoprint.plugins.excluderegion - INFO - Printing stopped: event=PrintFailed
2020-12-29 08:47:18,391 - octoprint.plugins.ipOnConnect - INFO - ipOnConnectPlugin: M117 192.168.0.116
2020-12-29 08:47:18,588 - octoprint.plugins.tracking - INFO - Sent tracking event print_failed, payload: {u'origin': u'local', u'reason': u'cancelled', u'file': '020932c69f958275972fda6aa8b041641cc4090b', u'elapsed': 1521}
2020-12-29 08:51:02,086 - octoprint.plugins.DisplayLayerProgress - INFO - FilePreProcessor. Checking LayerExpressions.
2020-12-29 08:51:02,087 - octoprint.plugins.DisplayLayerProgress - INFO - FilePreProcessor. LayerExpression valid. Start processing...
2020-12-29 08:51:02,833 - octoprint.filemanager.analysis - INFO - Starting analysis of local:dice2.gcode
2020-12-29 08:51:03,030 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile
2020-12-29 08:51:03,181 - octoprint.plugins.DisplayLayerProgress - INFO - Read total height from MetaFile
2020-12-29 08:51:04,138 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile
2020-12-29 08:51:04,275 - octoprint.filemanager.analysis - INFO - Analysis of entry local:dice2.gcode finished, needed 1.44s
2020-12-29 08:51:04,344 - octoprint.plugins.DisplayLayerProgress - INFO - Read total height from MetaFile
2020-12-29 08:51:04,455 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile
2020-12-29 08:51:04,618 - octoprint.plugins.DisplayLayerProgress - INFO - Read total height from MetaFile
2020-12-29 08:52:26,207 - octoprint.plugins.excluderegion - INFO - Setting update detected: g90InfluencesExtruder=False, clearRegionsAfterPrintFinishes=False, mayShrinkRegionsWhilePrinting=False, loggingMode=octoprint, enteringExcludedRegionGcode=None, exitingExcludedRegionGcode=None, extendedExcludeGcodes={'M73': {"gcode": "M73", "type": "ExcludedGcode", "mode": "merge", "description": "Suppress progress updates while excluding and output the most recent progress values encountered when exiting the excluded area"}, 'M117': {"gcode": "M117", "type": "ExcludedGcode", "mode": "last", "description": "Suppress display messages while excluding and output the last message encountered when exiting the excluded area"}, 'G4': {"gcode": "G4", "type": "ExcludedGcode", "mode": "exclude", "description": "Ignore all dwell commands in an excluded area to reduce delays while excluding"}, 'M205': {"gcode": "M205", "type": "ExcludedGcode", "mode": "merge", "description": "Record advanced setting changes while excluding and apply the most recent values in a single command after exiting the excluded area"}, 'M204': {"gcode": "M204", "type": "ExcludedGcode", "mode": "merge", "description": "Record default acceleration changes while excluding and apply the most recent values in a single command after exiting the excluded area"}}, atCommandActions={'ExcludeRegion': [{"action": "enable_exclusion", "type": "AtCommandAction", "command": "ExcludeRegion", "parameterPattern": "^\\s*(enable|on)(\\s|$)", "description": "Default action to enable exclusion"}, {"action": "disable_exclusion", "type": "AtCommandAction", "command": "ExcludeRegion", "parameterPattern": "^\\s*(disable|off)(\\s|$)", "description": "Default action to disable exclusion"}]}
2020-12-29 08:52:35,939 - octoprint.printer.standard.job - INFO - Print job selected - origin: local, path: dice2.gcode, owner: GeoJdk, user: GeoJdk
2020-12-29 08:52:35,961 - octoprint.plugins.DisplayLayerProgress - INFO - File '/home/pi/.octoprint/uploads/dice2.gcode' selected. Determining number of layers.
2020-12-29 08:52:35,962 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting"
2020-12-29 08:52:35,980 - octoprint.plugins.DisplayLayerProgress - INFO - Read total height from MetaFile
2020-12-29 08:52:35,983 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: dice2.gcode, owner: GeoJdk, user: GeoJdk
2020-12-29 08:52:36,418 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile
2020-12-29 08:52:36,547 - octoprint.plugins.DisplayLayerProgress - INFO - File select-event processing done!'
2020-12-29 08:52:36,548 - octoprint.plugins.excluderegion - INFO - File selected, resetting internal state
2020-12-29 08:52:36,614 - octoprint.plugins.DisplayLayerProgress - INFO - Printing started. Detailed progress started.{u'origin': u'local', u'name': u'dice2.gcode', u'user': 'GeoJdk', u'owner': 'GeoJdk', u'path': u'dice2.gcode', u'size': 1650255L}
2020-12-29 08:52:36,621 - octoprint.plugins.detailedprogress - INFO - Printing started. Detailed progress started.
2020-12-29 08:52:36,630 - octoprint.plugins.excluderegion - INFO - Printing started
2020-12-29 08:52:36,923 - octoprint.plugins.tracking - INFO - Sent tracking event print_started, payload: {u'origin': u'local', u'file': 'a431156d99cde60654713af1feb93c04a0ffbef4'}
2020-12-29 08:52:46,631 - octoprint.plugins.detailedprogress - INFO - Caught an exception 'printTimeString'
Traceback:Traceback (most recent call last):
  File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_detailedprogress/__init__.py", line 71, in do_work
    message = self._get_next_message(currentData)
  File "/home/pi/oprint/local/lib/python2.7/site-packages/octoprint_detailedprogress/__init__.py", line 138, in _get_next_message
    printTime=currentData["progress"]["printTimeString"],
KeyError: 'printTimeString'

2020-12-29 08:52:47,150 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2020-12-29 08:52:47,159 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Printing"
2020-12-29 08:56:33,568 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2020-12-29 08:56:33,852 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 7219}
2020-12-29 08:57:12,695 - octoprint.plugins.ABL_Expert - INFO - Grid mesh size is 4
2020-12-29 08:57:12,823 - octoprint.plugins.ABL_Expert - INFO - Grid mesh size is 10
2020-12-29 09:07:54,009 - octoprint.util.comm - INFO - Cancelling job on behalf of user GeoJdk
2020-12-29 09:07:54,022 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Cancelling"
2020-12-29 09:07:54,030 - octoprint.plugins.excluderegion - INFO - Printing stopped: event=PrintCancelling
2020-12-29 09:07:54,058 - octoprint.printer.standard.job - INFO - Print job cancelled - origin: local, path: dice2.gcode, owner: GeoJdk, user: GeoJdk
2020-12-29 09:07:54,193 - octoprint.plugins.DisplayLayerProgress - INFO - Printing stopped. Detailed progress stopped.
2020-12-29 09:07:54,206 - octoprint.plugins.detailedprogress - INFO - Printing stopped. Detailed progress stopped.
2020-12-29 09:07:54,231 - octoprint.plugins.excluderegion - INFO - Printing stopped: event=PrintCancelled
2020-12-29 09:07:54,451 - octoprint.plugins.tracking - INFO - Sent tracking event print_cancelled, payload: {u'origin': u'local', u'file': 'a431156d99cde60654713af1feb93c04a0ffbef4', u'elapsed': 918}
2020-12-29 09:07:54,461 - octoprint.plugins.DisplayLayerProgress - INFO - Printing stopped. Detailed progress stopped.
2020-12-29 09:07:54,473 - octoprint.plugins.detailedprogress - INFO - Printing stopped. Detailed progress stopped.
2020-12-29 09:07:54,474 - octoprint.plugins.excluderegion - INFO - Printing stopped: event=PrintFailed
2020-12-29 09:07:54,481 - octoprint.plugins.ipOnConnect - INFO - ipOnConnectPlugin: M117 192.168.0.116
2020-12-29 09:07:54,680 - octoprint.plugins.tracking - INFO - Sent tracking event print_failed, payload: {u'origin': u'local', u'reason': u'cancelled', u'file': 'a431156d99cde60654713af1feb93c04a0ffbef4', u'elapsed': 918}
2020-12-29 09:07:54,922 - octoprint.util.comm - INFO - Changing monitoring state from "Cancelling" to "Operational"
2020-12-29 09:11:33,574 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2020-12-29 09:11:33,852 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 8119}
2020-12-29 09:26:33,584 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2020-12-29 09:26:33,908 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 9019}
2020-12-29 09:41:33,587 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2020-12-29 09:41:33,862 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 9920}
2020-12-29 09:56:33,589 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2020-12-29 09:56:33,873 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 10820}
2020-12-29 10:11:33,591 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2020-12-29 10:11:33,876 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 11720}
2020-12-29 10:16:51,866 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.0.101
2020-12-29 10:26:33,592 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2020-12-29 10:26:33,868 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 12620}
2020-12-29 10:41:33,594 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2020-12-29 10:41:33,876 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 13520}
2020-12-29 10:56:33,596 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2020-12-29 10:56:33,880 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 14420}
2020-12-29 10:58:31,674 - octoprint.server.util.flask - INFO - Passively logging in user GeoJdk from ::ffff:192.168.0.101
2020-12-29 10:58:31,675 - octoprint.access.users - INFO - Logged in user: GeoJdk
2020-12-29 10:58:33,034 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.0.101
2020-12-29 10:58:33,120 - octoprint.server.util.flask - INFO - Passively logging in user GeoJdk from ::ffff:192.168.0.101
2020-12-29 10:58:33,121 - octoprint.access.users - INFO - Logged in user: GeoJdk
2020-12-29 10:58:36,006 - octoprint.server.util.sockjs - INFO - User GeoJdk logged in on the socket from client ::ffff:192.168.0.101
2020-12-29 11:11:33,600 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2020-12-29 11:11:33,884 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 15320}
2020-12-29 11:26:33,601 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2020-12-29 11:26:33,893 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 16220}
2020-12-29 11:38:32,084 - octoprint.plugins.excluderegion - INFO - Setting update detected: g90InfluencesExtruder=False, clearRegionsAfterPrintFinishes=False, mayShrinkRegionsWhilePrinting=False, loggingMode=octoprint, enteringExcludedRegionGcode=None, exitingExcludedRegionGcode=None, extendedExcludeGcodes={'M73': {"gcode": "M73", "type": "ExcludedGcode", "mode": "merge", "description": "Suppress progress updates while excluding and output the most recent progress values encountered when exiting the excluded area"}, 'M117': {"gcode": "M117", "type": "ExcludedGcode", "mode": "last", "description": "Suppress display messages while excluding and output the last message encountered when exiting the excluded area"}, 'G4': {"gcode": "G4", "type": "ExcludedGcode", "mode": "exclude", "description": "Ignore all dwell commands in an excluded area to reduce delays while excluding"}, 'M205': {"gcode": "M205", "type": "ExcludedGcode", "mode": "merge", "description": "Record advanced setting changes while excluding and apply the most recent values in a single command after exiting the excluded area"}, 'M204': {"gcode": "M204", "type": "ExcludedGcode", "mode": "merge", "description": "Record default acceleration changes while excluding and apply the most recent values in a single command after exiting the excluded area"}}, atCommandActions={'ExcludeRegion': [{"action": "enable_exclusion", "type": "AtCommandAction", "command": "ExcludeRegion", "parameterPattern": "^\\s*(enable|on)(\\s|$)", "description": "Default action to enable exclusion"}, {"action": "disable_exclusion", "type": "AtCommandAction", "command": "ExcludeRegion", "parameterPattern": "^\\s*(disable|off)(\\s|$)", "description": "Default action to disable exclusion"}]}
2020-12-29 11:38:49,489 - octoprint.util.comm - INFO - Starting job on behalf of user GeoJdk
2020-12-29 11:38:49,493 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting"
2020-12-29 11:38:49,515 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: dice2.gcode, owner: GeoJdk, user: GeoJdk
2020-12-29 11:38:49,647 - octoprint.plugins.DisplayLayerProgress - INFO - Printing started. Detailed progress started.{u'origin': u'local', u'name': u'dice2.gcode', u'user': 'GeoJdk', u'owner': 'GeoJdk', u'path': u'dice2.gcode', u'size': 1650255L}
2020-12-29 11:38:49,660 - octoprint.plugins.detailedprogress - INFO - Printing started. Detailed progress started.
2020-12-29 11:38:49,672 - octoprint.plugins.excluderegion - INFO - Printing started
2020-12-29 11:38:49,844 - octoprint.plugins.tracking - INFO - Sent tracking event print_started, payload: {u'origin': u'local', u'file': 'a431156d99cde60654713af1feb93c04a0ffbef4'}
2020-12-29 11:38:53,944 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2020-12-29 11:38:53,954 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Printing"
2020-12-29 11:41:33,603 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2020-12-29 11:41:33,890 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 17120}
2020-12-29 11:43:22,953 - octoprint.plugins.ABL_Expert - INFO - Grid mesh size is 4
2020-12-29 11:43:23,082 - octoprint.plugins.ABL_Expert - INFO - Grid mesh size is 10
2020-12-29 11:47:04,296 - octoprint.plugins.excluderegion - INFO - Setting update detected: g90InfluencesExtruder=False, clearRegionsAfterPrintFinishes=False, mayShrinkRegionsWhilePrinting=False, loggingMode=octoprint, enteringExcludedRegionGcode=None, exitingExcludedRegionGcode=None, extendedExcludeGcodes={'M73': {"gcode": "M73", "type": "ExcludedGcode", "mode": "merge", "description": "Suppress progress updates while excluding and output the most recent progress values encountered when exiting the excluded area"}, 'M117': {"gcode": "M117", "type": "ExcludedGcode", "mode": "last", "description": "Suppress display messages while excluding and output the last message encountered when exiting the excluded area"}, 'G4': {"gcode": "G4", "type": "ExcludedGcode", "mode": "exclude", "description": "Ignore all dwell commands in an excluded area to reduce delays while excluding"}, 'M205': {"gcode": "M205", "type": "ExcludedGcode", "mode": "merge", "description": "Record advanced setting changes while excluding and apply the most recent values in a single command after exiting the excluded area"}, 'M204': {"gcode": "M204", "type": "ExcludedGcode", "mode": "merge", "description": "Record default acceleration changes while excluding and apply the most recent values in a single command after exiting the excluded area"}}, atCommandActions={'ExcludeRegion': [{"action": "enable_exclusion", "type": "AtCommandAction", "command": "ExcludeRegion", "parameterPattern": "^\\s*(enable|on)(\\s|$)", "description": "Default action to enable exclusion"}, {"action": "disable_exclusion", "type": "AtCommandAction", "command": "ExcludeRegion", "parameterPattern": "^\\s*(disable|off)(\\s|$)", "description": "Default action to disable exclusion"}]}
2020-12-29 11:48:24,721 - octoprint.plugins.excluderegion - INFO - Setting update detected: g90InfluencesExtruder=False, clearRegionsAfterPrintFinishes=False, mayShrinkRegionsWhilePrinting=False, loggingMode=octoprint, enteringExcludedRegionGcode=None, exitingExcludedRegionGcode=None, extendedExcludeGcodes={'M73': {"gcode": "M73", "type": "ExcludedGcode", "mode": "merge", "description": "Suppress progress updates while excluding and output the most recent progress values encountered when exiting the excluded area"}, 'M117': {"gcode": "M117", "type": "ExcludedGcode", "mode": "last", "description": "Suppress display messages while excluding and output the last message encountered when exiting the excluded area"}, 'G4': {"gcode": "G4", "type": "ExcludedGcode", "mode": "exclude", "description": "Ignore all dwell commands in an excluded area to reduce delays while excluding"}, 'M205': {"gcode": "M205", "type": "ExcludedGcode", "mode": "merge", "description": "Record advanced setting changes while excluding and apply the most recent values in a single command after exiting the excluded area"}, 'M204': {"gcode": "M204", "type": "ExcludedGcode", "mode": "merge", "description": "Record default acceleration changes while excluding and apply the most recent values in a single command after exiting the excluded area"}}, atCommandActions={'ExcludeRegion': [{"action": "enable_exclusion", "type": "AtCommandAction", "command": "ExcludeRegion", "parameterPattern": "^\\s*(enable|on)(\\s|$)", "description": "Default action to enable exclusion"}, {"action": "disable_exclusion", "type": "AtCommandAction", "command": "ExcludeRegion", "parameterPattern": "^\\s*(disable|off)(\\s|$)", "description": "Default action to disable exclusion"}]}
2020-12-29 11:48:32,514 - octoprint.util.comm - INFO - Cancelling job on behalf of user GeoJdk
2020-12-29 11:48:32,537 - octoprint.plugins.excluderegion - INFO - Printing stopped: event=PrintCancelling
2020-12-29 11:48:32,539 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Cancelling"
2020-12-29 11:48:32,565 - octoprint.printer.standard.job - INFO - Print job cancelled - origin: local, path: dice2.gcode, owner: GeoJdk, user: GeoJdk
2020-12-29 11:48:32,647 - octoprint.plugins.DisplayLayerProgress - INFO - Printing stopped. Detailed progress stopped.
2020-12-29 11:48:32,678 - octoprint.plugins.detailedprogress - INFO - Printing stopped. Detailed progress stopped.
2020-12-29 11:48:32,694 - octoprint.plugins.excluderegion - INFO - Printing stopped: event=PrintCancelled
2020-12-29 11:48:32,966 - octoprint.plugins.tracking - INFO - Sent tracking event print_cancelled, payload: {u'origin': u'local', u'file': 'a431156d99cde60654713af1feb93c04a0ffbef4', u'elapsed': 583}
2020-12-29 11:48:32,984 - octoprint.plugins.DisplayLayerProgress - INFO - Printing stopped. Detailed progress stopped.
2020-12-29 11:48:32,990 - octoprint.plugins.detailedprogress - INFO - Printing stopped. Detailed progress stopped.
2020-12-29 11:48:32,993 - octoprint.plugins.excluderegion - INFO - Printing stopped: event=PrintFailed
2020-12-29 11:48:33,000 - octoprint.plugins.ipOnConnect - INFO - ipOnConnectPlugin: M117 192.168.0.116
2020-12-29 11:48:33,202 - octoprint.plugins.tracking - INFO - Sent tracking event print_failed, payload: {u'origin': u'local', u'reason': u'cancelled', u'file': 'a431156d99cde60654713af1feb93c04a0ffbef4', u'elapsed': 583}
2020-12-29 11:48:33,492 - octoprint.util.comm - INFO - Changing monitoring state from "Cancelling" to "Operational"
2020-12-29 11:48:53,491 - octoprint.util.comm - INFO - Starting job on behalf of user GeoJdk
2020-12-29 11:48:53,503 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting"
2020-12-29 11:48:53,517 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: dice2.gcode, owner: GeoJdk, user: GeoJdk
2020-12-29 11:48:53,700 - octoprint.util.comm - INFO - Communication timeout while printing, trying to trigger response from printer.
2020-12-29 11:48:53,753 - octoprint.plugins.DisplayLayerProgress - INFO - Printing started. Detailed progress started.{u'origin': u'local', u'name': u'dice2.gcode', u'user': 'GeoJdk', u'owner': 'GeoJdk', u'path': u'dice2.gcode', u'size': 1650255L}
2020-12-29 11:48:53,770 - octoprint.plugins.detailedprogress - INFO - Printing started. Detailed progress started.
2020-12-29 11:48:53,784 - octoprint.plugins.excluderegion - INFO - Printing started
2020-12-29 11:48:53,921 - octoprint.plugins.tracking - INFO - Sent tracking event print_started, payload: {u'origin': u'local', u'file': 'a431156d99cde60654713af1feb93c04a0ffbef4'}
2020-12-29 11:48:58,300 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2020-12-29 11:48:58,317 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Printing"
2020-12-29 11:52:34,290 - octoprint.plugins.ABL_Expert - INFO - Grid mesh size is 4
2020-12-29 11:52:34,411 - octoprint.plugins.ABL_Expert - INFO - Grid mesh size is 10
2020-12-29 11:56:33,604 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2020-12-29 11:56:33,893 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 18020}
2020-12-29 11:59:11,486 - octoprint.util.comm - INFO - Cancelling job on behalf of user GeoJdk
2020-12-29 11:59:11,490 - octoprint.plugins.excluderegion - INFO - Printing stopped: event=PrintCancelling
2020-12-29 11:59:11,491 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Cancelling"
2020-12-29 11:59:11,504 - octoprint.printer.standard.job - INFO - Print job cancelled - origin: local, path: dice2.gcode, owner: GeoJdk, user: GeoJdk
2020-12-29 11:59:11,568 - octoprint.plugins.DisplayLayerProgress - INFO - Printing stopped. Detailed progress stopped.
2020-12-29 11:59:11,610 - octoprint.plugins.detailedprogress - INFO - Printing stopped. Detailed progress stopped.
2020-12-29 11:59:11,649 - octoprint.plugins.excluderegion - INFO - Printing stopped: event=PrintCancelled
2020-12-29 11:59:11,758 - octoprint.plugins.DisplayLayerProgress - INFO - Printing stopped. Detailed progress stopped.
2020-12-29 11:59:11,764 - octoprint.plugins.detailedprogress - INFO - Printing stopped. Detailed progress stopped.
2020-12-29 11:59:11,765 - octoprint.plugins.excluderegion - INFO - Printing stopped: event=PrintFailed
2020-12-29 11:59:11,777 - octoprint.plugins.ipOnConnect - INFO - ipOnConnectPlugin: M117 192.168.0.116
2020-12-29 11:59:11,788 - octoprint.plugins.tracking - INFO - Sent tracking event print_cancelled, payload: {u'origin': u'local', u'file': 'a431156d99cde60654713af1feb93c04a0ffbef4', u'elapsed': 618}
2020-12-29 11:59:12,020 - octoprint.plugins.tracking - INFO - Sent tracking event print_failed, payload: {u'origin': u'local', u'reason': u'cancelled', u'file': 'a431156d99cde60654713af1feb93c04a0ffbef4', u'elapsed': 618}
2020-12-29 11:59:12,267 - octoprint.util.comm - INFO - Changing monitoring state from "Cancelling" to "Operational"