2020-05-26 17:59:52,620 - Connecting to: /dev/ttyUSB0
2020-05-26 17:59:52,639 - Changing monitoring state from "Offline" to "Opening serial port"
2020-05-26 17:59:52,653 - Connected to: Serial<id=0x72acd5d0, open=True>(port='/dev/ttyUSB0', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=10.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
2020-05-26 17:59:52,653 - Starting baud rate detection...
2020-05-26 17:59:52,654 - Changing monitoring state from "Opening serial port" to "Detecting baudrate"
2020-05-26 17:59:53,749 - Trying baudrate: 115200
2020-05-26 17:59:54,473 - Send: N0 M110 N0*125
2020-05-26 18:00:04,169 - Baudrate test retry #1
2020-05-26 18:00:04,354 - Send: N0 M110 N0*125
2020-05-26 18:00:12,961 - Baudrate test retry #2
2020-05-26 18:00:12,968 - Send: N0 M110 N0*125
2020-05-26 18:00:13,983 - Baudrate test retry #3
2020-05-26 18:00:14,016 - Send: N0 M110 N0*125
2020-05-26 18:00:15,024 - Baudrate test retry #4
2020-05-26 18:00:15,031 - Send: N0 M110 N0*125
2020-05-26 18:00:16,030 - Trying baudrate: 250000
2020-05-26 18:00:16,038 - Send: N0 M110 N0*125
2020-05-26 18:00:17,048 - Baudrate test retry #1
2020-05-26 18:00:17,096 - Send: N0 M110 N0*125
2020-05-26 18:00:18,193 - Baudrate test retry #2
2020-05-26 18:00:18,238 - Send: N0 M110 N0*125
2020-05-26 18:00:19,261 - Baudrate test retry #3
2020-05-26 18:00:19,270 - Send: N0 M110 N0*125
2020-05-26 18:00:20,285 - Baudrate test retry #4
2020-05-26 18:00:20,293 - Send: N0 M110 N0*125
2020-05-26 18:00:21,343 - Trying baudrate: 230400
2020-05-26 18:00:21,348 - Send: N0 M110 N0*125
2020-05-26 18:00:22,462 - Baudrate test retry #1
2020-05-26 18:00:22,467 - Send: N0 M110 N0*125
2020-05-26 18:00:23,473 - Baudrate test retry #2
2020-05-26 18:00:23,482 - Send: N0 M110 N0*125
2020-05-26 18:00:24,538 - Baudrate test retry #3
2020-05-26 18:00:24,737 - Send: N0 M110 N0*125
2020-05-26 18:00:25,567 - Baudrate test retry #4
2020-05-26 18:00:25,574 - Send: N0 M110 N0*125
2020-05-26 18:00:26,574 - Trying baudrate: 57600
2020-05-26 18:00:26,583 - Send: N0 M110 N0*125
2020-05-26 18:00:27,630 - Baudrate test retry #1
2020-05-26 18:00:27,636 - Send: N0 M110 N0*125
2020-05-26 18:00:28,638 - Baudrate test retry #2
2020-05-26 18:00:28,647 - Send: N0 M110 N0*125
2020-05-26 18:00:29,754 - Baudrate test retry #3
2020-05-26 18:00:29,759 - Send: N0 M110 N0*125
2020-05-26 18:00:30,763 - Baudrate test retry #4
2020-05-26 18:00:30,768 - Send: N0 M110 N0*125
2020-05-26 18:00:31,769 - Trying baudrate: 38400
2020-05-26 18:00:31,773 - Send: N0 M110 N0*125
2020-05-26 18:00:32,790 - Baudrate test retry #1
2020-05-26 18:00:32,795 - Send: N0 M110 N0*125
2020-05-26 18:00:33,803 - Baudrate test retry #2
2020-05-26 18:00:33,814 - Send: N0 M110 N0*125
2020-05-26 18:00:34,815 - Baudrate test retry #3
2020-05-26 18:00:34,823 - Send: N0 M110 N0*125
2020-05-26 18:00:35,825 - Baudrate test retry #4
2020-05-26 18:00:35,845 - Send: N0 M110 N0*125
2020-05-26 18:00:36,838 - Trying baudrate: 19200
2020-05-26 18:00:36,847 - Send: N0 M110 N0*125
2020-05-26 18:00:37,847 - Baudrate test retry #1
2020-05-26 18:00:37,867 - Send: N0 M110 N0*125
2020-05-26 18:00:38,866 - Baudrate test retry #2
2020-05-26 18:00:38,884 - Send: N0 M110 N0*125
2020-05-26 18:00:39,880 - Baudrate test retry #3
2020-05-26 18:00:39,903 - Send: N0 M110 N0*125
2020-05-26 18:00:40,900 - Baudrate test retry #4
2020-05-26 18:00:40,920 - Send: N0 M110 N0*125
2020-05-26 18:00:41,911 - Trying baudrate: 9600
2020-05-26 18:00:41,924 - Send: N0 M110 N0*125
2020-05-26 18:00:42,925 - Baudrate test retry #1
2020-05-26 18:00:42,938 - Send: N0 M110 N0*125
2020-05-26 18:00:43,937 - Baudrate test retry #2
2020-05-26 18:00:43,944 - Send: N0 M110 N0*125
2020-05-26 18:00:44,946 - Baudrate test retry #3
2020-05-26 18:00:44,965 - Send: N0 M110 N0*125
2020-05-26 18:00:45,966 - Baudrate test retry #4
2020-05-26 18:00:45,973 - Send: N0 M110 N0*125
2020-05-26 18:00:46,973 - Changing monitoring state from "Detecting baudrate" to "Error: No more baudrates to test, and no suitable baudrate found."
2020-05-26 18:00:46,985 - Changing monitoring state from "Error: No more baudrates to test, and no suitable baudrate found." to "Offline (Error: No more baudrates to test, and no suitable baudrate found.)"
2020-05-26 18:00:46,991 - Connection closed, closing down monitor
2020-05-26 18:03:30,619 - Connecting to: /dev/ttyUSB0
2020-05-26 18:03:30,641 - Changing monitoring state from "Offline" to "Opening serial port"
2020-05-26 18:03:30,644 - Connected to: Serial<id=0x67302470, open=True>(port='/dev/ttyUSB0', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=10.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
2020-05-26 18:03:30,645 - Changing monitoring state from "Opening serial port" to "Connecting"
2020-05-26 18:04:00,691 - There was a timeout while trying to connect to the printer
2020-05-26 18:04:00,710 - Changing monitoring state from "Connecting" to "Offline"
2020-05-26 18:04:00,727 - Connection closed, closing down monitor
2020-05-26 18:04:56,944 - Connecting to: /dev/ttyAMA0
2020-05-26 18:04:56,959 - Changing monitoring state from "Offline" to "Opening serial port"
2020-05-26 18:04:56,967 - Connected to: Serial<id=0x66e7b7f0, open=True>(port='/dev/ttyAMA0', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=10.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
2020-05-26 18:04:56,970 - Changing monitoring state from "Opening serial port" to "Connecting"
2020-05-26 18:04:57,015 - Unexpected error while reading serial port, please consult octoprint.log for details: IOError: '[Errno 25] Inappropriate ioctl for device' @ comm.py:_readline:2823
2020-05-26 18:04:57,020 - Changing monitoring state from "Connecting" to "Offline (Error: IOError: '[Errno 25] Inappropriate ioctl for device' @ comm.py:_readline:2823)"
2020-05-26 18:04:57,027 - Connection closed, closing down monitor
2020-05-26 18:05:07,879 - Connecting to: /dev/ttyUSB0
2020-05-26 18:05:07,901 - Changing monitoring state from "Offline" to "Opening serial port"
2020-05-26 18:05:07,908 - Connected to: Serial<id=0x66eb4cf0, open=True>(port='/dev/ttyUSB0', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=10.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
2020-05-26 18:05:07,910 - Changing monitoring state from "Opening serial port" to "Connecting"
2020-05-26 18:05:26,428 - Unexpected error while reading serial port, please consult octoprint.log for details: SerialException: 'device reports readiness to read but returned no data (device disconnected or multiple access on port?)' @ comm.py:_readline:2823
2020-05-26 18:05:26,445 - Please see https://faq.octoprint.org/serialerror for possible reasons of this.
2020-05-26 18:05:26,460 - Changing monitoring state from "Connecting" to "Offline (Error: SerialException: 'device reports readiness to read but returned no data (device disconnected or multiple access on port?)' @ comm.py:_readline:2823)"
2020-05-26 18:05:26,474 - Connection closed, closing down monitor
2020-05-26 18:06:03,211 - Connecting to: /dev/ttyUSB0
2020-05-26 18:06:03,229 - Changing monitoring state from "Offline" to "Opening serial port"
2020-05-26 18:06:03,239 - Connected to: Serial<id=0x67144510, open=True>(port='/dev/ttyUSB0', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=10.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
2020-05-26 18:06:03,240 - Changing monitoring state from "Opening serial port" to "Connecting"
2020-05-26 18:06:33,279 - There was a timeout while trying to connect to the printer
2020-05-26 18:06:33,299 - Changing monitoring state from "Connecting" to "Offline"
2020-05-26 18:06:33,320 - Connection closed, closing down monitor
2020-05-26 18:08:22,151 - Connecting to: /dev/ttyUSB0
2020-05-26 18:08:22,168 - Changing monitoring state from "Offline" to "Opening serial port"
2020-05-26 18:08:22,172 - Connected to: Serial<id=0x66dac2f0, open=True>(port='/dev/ttyUSB0', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=10.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
2020-05-26 18:08:22,173 - Starting baud rate detection...
2020-05-26 18:08:22,174 - Changing monitoring state from "Opening serial port" to "Detecting baudrate"
2020-05-26 18:08:23,187 - Trying baudrate: 115200
2020-05-26 18:08:23,196 - Send: N0 M110 N0*125
2020-05-26 18:08:33,210 - Baudrate test retry #1
2020-05-26 18:08:33,219 - Send: N0 M110 N0*125
2020-05-26 18:08:34,218 - Baudrate test retry #2
2020-05-26 18:08:34,226 - Send: N0 M110 N0*125
2020-05-26 18:08:35,229 - Baudrate test retry #3
2020-05-26 18:08:35,247 - Send: N0 M110 N0*125
2020-05-26 18:08:36,241 - Baudrate test retry #4
2020-05-26 18:08:36,250 - Send: N0 M110 N0*125
2020-05-26 18:08:37,261 - Trying baudrate: 250000
2020-05-26 18:08:37,272 - Send: N0 M110 N0*125
2020-05-26 18:08:38,275 - Baudrate test retry #1
2020-05-26 18:08:38,293 - Send: N0 M110 N0*125
2020-05-26 18:08:39,283 - Baudrate test retry #2
2020-05-26 18:08:39,292 - Send: N0 M110 N0*125
2020-05-26 18:08:40,294 - Baudrate test retry #3
2020-05-26 18:08:40,307 - Send: N0 M110 N0*125
2020-05-26 18:08:41,309 - Baudrate test retry #4
2020-05-26 18:08:41,325 - Send: N0 M110 N0*125
2020-05-26 18:08:42,339 - Trying baudrate: 230400
2020-05-26 18:08:42,349 - Send: N0 M110 N0*125
2020-05-26 18:08:43,347 - Baudrate test retry #1
2020-05-26 18:08:43,353 - Send: N0 M110 N0*125
2020-05-26 18:08:44,354 - Baudrate test retry #2
2020-05-26 18:08:44,372 - Send: N0 M110 N0*125
2020-05-26 18:08:45,373 - Baudrate test retry #3
2020-05-26 18:08:45,390 - Send: N0 M110 N0*125
2020-05-26 18:08:46,398 - Baudrate test retry #4
2020-05-26 18:08:46,406 - Send: N0 M110 N0*125
2020-05-26 18:08:47,413 - Trying baudrate: 57600
2020-05-26 18:08:47,421 - Send: N0 M110 N0*125
2020-05-26 18:08:48,419 - Baudrate test retry #1
2020-05-26 18:08:48,425 - Send: N0 M110 N0*125
2020-05-26 18:08:49,431 - Baudrate test retry #2
2020-05-26 18:08:49,443 - Send: N0 M110 N0*125
2020-05-26 18:08:50,439 - Baudrate test retry #3
2020-05-26 18:08:50,462 - Send: N0 M110 N0*125
2020-05-26 18:08:51,458 - Baudrate test retry #4
2020-05-26 18:08:51,476 - Send: N0 M110 N0*125
2020-05-26 18:08:52,468 - Trying baudrate: 38400
2020-05-26 18:08:52,478 - Send: N0 M110 N0*125
2020-05-26 18:08:53,476 - Baudrate test retry #1
2020-05-26 18:08:53,495 - Send: N0 M110 N0*125
2020-05-26 18:08:54,483 - Baudrate test retry #2
2020-05-26 18:08:54,496 - Send: N0 M110 N0*125
2020-05-26 18:08:55,501 - Baudrate test retry #3
2020-05-26 18:08:55,513 - Send: N0 M110 N0*125
2020-05-26 18:08:56,509 - Baudrate test retry #4
2020-05-26 18:08:56,515 - Send: N0 M110 N0*125
2020-05-26 18:08:57,518 - Trying baudrate: 19200
2020-05-26 18:08:57,537 - Send: N0 M110 N0*125
2020-05-26 18:08:58,538 - Baudrate test retry #1
2020-05-26 18:08:58,574 - Send: N0 M110 N0*125
2020-05-26 18:08:59,562 - Baudrate test retry #2
2020-05-26 18:08:59,574 - Send: N0 M110 N0*125
2020-05-26 18:09:00,575 - Baudrate test retry #3
2020-05-26 18:09:00,596 - Send: N0 M110 N0*125
2020-05-26 18:09:01,585 - Baudrate test retry #4
2020-05-26 18:09:01,594 - Send: N0 M110 N0*125
2020-05-26 18:09:02,606 - Trying baudrate: 9600
2020-05-26 18:09:02,613 - Send: N0 M110 N0*125
2020-05-26 18:09:03,614 - Baudrate test retry #1
2020-05-26 18:09:03,630 - Send: N0 M110 N0*125
2020-05-26 18:09:04,633 - Baudrate test retry #2
2020-05-26 18:09:04,641 - Send: N0 M110 N0*125
2020-05-26 18:09:05,645 - Baudrate test retry #3
2020-05-26 18:09:05,666 - Send: N0 M110 N0*125
2020-05-26 18:09:06,667 - Baudrate test retry #4
2020-05-26 18:09:06,681 - Send: N0 M110 N0*125
2020-05-26 18:09:07,679 - Changing monitoring state from "Detecting baudrate" to "Error: No more baudrates to test, and no suitable baudrate found."
2020-05-26 18:09:07,712 - Changing monitoring state from "Error: No more baudrates to test, and no suitable baudrate found." to "Offline (Error: No more baudrates to test, and no suitable baudrate found.)"
2020-05-26 18:09:07,727 - Connection closed, closing down monitor
2020-05-26 18:09:20,833 - Connecting to: /dev/ttyUSB0
2020-05-26 18:09:20,855 - Changing monitoring state from "Offline" to "Opening serial port"
2020-05-26 18:09:20,863 - Connected to: Serial<id=0x66eb4370, open=True>(port='/dev/ttyUSB0', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=10.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
2020-05-26 18:09:20,864 - Changing monitoring state from "Opening serial port" to "Connecting"
2020-05-26 18:09:50,902 - There was a timeout while trying to connect to the printer
2020-05-26 18:09:50,915 - Changing monitoring state from "Connecting" to "Offline"
2020-05-26 18:09:50,931 - Connection closed, closing down monitor