2023-08-23 09:19:42,230 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.178.21
2023-08-23 09:19:42,290 - octoprint.server.util.flask - INFO - Passively logging in user jonas from ::ffff:192.168.178.21
2023-08-23 09:19:42,292 - octoprint.access.users - INFO - Logged in user: jonas
2023-08-23 09:19:42,335 - octoprint.server.util.sockjs - INFO - User jonas logged in on the socket from client ::ffff:192.168.178.21
2023-08-23 09:19:42,898 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json
2023-08-23 09:20:42,158 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2023-08-23 09:20:52,479 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 34213, 'printer_state': 'OFFLINE'}
2023-08-23 09:25:47,670 - octoprint.server - INFO - Serial port list was updated, refreshing the port list in the frontend
2023-08-23 09:26:15,790 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection"
2023-08-23 09:26:15,814 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 1 port/baudrate candidates: /dev/ttyUSB0@115200
2023-08-23 09:26:15,814 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200
2023-08-23 09:26:15,817 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200
2023-08-23 09:26:15,902 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s
2023-08-23 09:26:15,912 - octoprint.server - INFO - Autorefresh of serial port list stopped
2023-08-23 09:26:15,924 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2023-08-23 09:26:16,001 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Operational"
2023-08-23 09:26:16,021 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2023-08-23 09:26:16,096 - octoprint.plugins.firmwareupdater - INFO - Got CONNECTED event
2023-08-23 09:26:16,099 - octoprint.plugins.firmwareupdater - INFO - Run postflash flag is not set
2023-08-23 09:26:16,100 - octoprint.plugins.stats - INFO - Printer Stats - on_event
2023-08-23 09:26:16,181 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin abl10x10-v006-byTT (Aug 15 2023 13:10:26)"
2023-08-23 09:26:16,254 - octoprint.plugins.firmwareupdater - INFO - Setting BINARY_FILE_TRANSFER capability to False
2023-08-23 09:26:16,275 - octoprint.plugins.ABL_Expert - INFO - self.printer_cap[eeprom] is now 1

2023-08-23 09:26:16,282 - octoprint.plugins.z_probe_offset - INFO - Printer_cap[eeprom]:1
2023-08-23 09:26:16,307 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting
2023-08-23 09:26:16,320 - octoprint.plugins.ABL_Expert - INFO - self.printer_cap[autolevel] is now 1

2023-08-23 09:26:16,337 - octoprint.plugins.ABL_Expert - INFO - self.printer_cap[z_probe] is now 1

2023-08-23 09:26:16,343 - octoprint.plugins.z_probe_offset - INFO - Printer_cap[z_probe]:1
2023-08-23 09:26:16,357 - octoprint.plugins.ABL_Expert - INFO - self.printer_cap[leveling_data] is now 1

2023-08-23 09:26:16,410 - octoprint.util.comm - INFO - Firmware states that it supports emergency GCODEs to be sent without waiting for an acknowledgement first
2023-08-23 09:26:16,515 - octoprint.util.comm - INFO - Firmware states that it supports long filenames
2023-08-23 09:26:16,572 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {'firmware_name': 'Marlin abl10x10-v006-byTT (Aug 15 2023 13:10:26)', 'printer_port': 'AUTO', 'printer_baudrate': 115200}
2023-08-23 09:26:16,718 - octoprint.plugins.eeprom_marlin - INFO - M503 detected, collecting data
2023-08-23 09:26:16,866 - octoprint.plugins.eeprom_marlin - WARNING - EEPROM output line not recognized, skipped
2023-08-23 09:26:16,866 - octoprint.plugins.eeprom_marlin - WARNING - Line: echo:  M149 C ; Units in Celsius
2023-08-23 09:26:17,235 - octoprint.plugins.eeprom_marlin - WARNING - EEPROM output line not recognized, skipped
2023-08-23 09:26:17,235 - octoprint.plugins.eeprom_marlin - WARNING - Line: echo:  M221 S100
2023-08-23 09:26:17,748 - octoprint.plugins.eeprom_marlin - WARNING - EEPROM output line not recognized, skipped
2023-08-23 09:26:17,748 - octoprint.plugins.eeprom_marlin - WARNING - Line: echo:  M413 S1 ; ON
2023-08-23 09:26:17,758 - octoprint.plugins.z_probe_offset - INFO - Z probe offset is now -3.05
2023-08-23 09:26:17,822 - octoprint.plugins.eeprom_marlin - INFO - Finished data collection, updating UI
2023-08-23 09:26:17,849 - octoprint.plugins.z_probe_offset - INFO - Z probe offset is now -3.05
2023-08-23 09:26:17,909 - octoprint.plugins.ABL_Expert - INFO - Grid mesh size is 10
2023-08-23 09:26:18,032 - octoprint.plugins.z_probe_offset - INFO - Z probe offset is now -3.05
2023-08-23 09:26:30,107 - octoprint.filemanager.analysis - INFO - Starting analysis of local:CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:26:30,388 - octoprint.plugins.stats - INFO - Printer Stats - on_event
2023-08-23 09:26:34,486 - octoprint.filemanager.analysis - INFO - Analysis of entry local:CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode finished, needed 4.38s
2023-08-23 09:26:35,367 - octoprint.printer.standard.job - INFO - Print job selected - origin: local, path: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode, owner: jonas, user: jonas
2023-08-23 09:26:35,389 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting"
2023-08-23 09:26:35,400 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode, owner: jonas, user: jonas
2023-08-23 09:26:35,516 - octoprint.plugins.octoeverywhere - INFO - Starting FinalSnap
2023-08-23 09:26:35,518 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:26:35,519 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:26:35,692 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:26:35,693 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:26:35,893 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:26:35,895 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:26:36,006 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:26:36,007 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:26:36,184 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:26:36,200 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:26:36,522 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:26:36,523 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:26:36,786 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:26:36,787 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:26:37,103 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:26:37,104 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:26:37,251 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:26:37,252 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:26:37,311 - octoprint.plugins.octoeverywhere - INFO - NotificationsHandler successfully sent 'progress'
2023-08-23 09:26:37,429 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:26:37,432 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:26:37,640 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2023-08-23 09:26:37,650 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Printing"
2023-08-23 09:26:37,704 - octoprint.plugins.action_command_notification - INFO - Got a notification: Bed Heating...
2023-08-23 09:26:37,719 - octoprint.plugins.action_command_notification - INFO - Got a notification: E1 Heating...
2023-08-23 09:26:37,939 - octoprint.plugins.excluderegion - INFO - File selected, resetting internal state
2023-08-23 09:26:37,971 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid
2023-08-23 09:26:38,383 - octoprint.plugins.tracking - INFO - Sent tracking event print_started, payload: {'origin': 'local', 'file': 'd0998099b4ff8c4ea13c61013b0c3635573b9315'}
2023-08-23 09:26:38,534 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:26:38,536 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:26:38,695 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:26:38,696 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:26:38,908 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:26:38,909 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:26:39,028 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:26:39,037 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:26:39,169 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:26:39,170 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:26:39,767 - octoprint.util.comm - INFO - Printer seems to support the busy protocol, will adjust timeouts and set busy interval accordingly
2023-08-23 09:26:39,865 - octoprint.plugins.pluginmanager - INFO - Loaded plugin notices data from https://plugins.octoprint.org/notices.json
2023-08-23 09:26:40,124 - octoprint.plugins.detailedprogress - INFO - Printing started. Detailed progress started.
2023-08-23 09:26:40,145 - octoprint.plugins.excluderegion - INFO - Printing started
2023-08-23 09:26:40,151 - octoprint.plugin - ERROR - Error while calling plugin homeassistant
Traceback (most recent call last):
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugin/__init__.py", line 275, in call_plugin
    result = getattr(plugin, method)(*args, **kwargs)
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/util/__init__.py", line 1686, in wrapper
    return f(*args, **kwargs)
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint_homeassistant/__init__.py", line 1115, in on_event
    self.mqtt_publish(
TypeError: 'NoneType' object is not callable
2023-08-23 09:26:40,160 - octoprint.plugins.octoeverywhere - WARNING - FinalSnap target image index is larger than our buffer. 9 2
2023-08-23 09:26:40,160 - octoprint.plugins.octoeverywhere - INFO - Stopping final snap and using snapshot from ~9.0 sec ago, index slot 1 / 2
2023-08-23 09:26:40,163 - octoprint.plugins.octoeverywhere - INFO - RepeatTimer thread exit
2023-08-23 09:26:40,166 - octoprint.plugins.octoeverywhere - INFO - Gadget is now watching!
2023-08-23 09:26:40,175 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:26:40,176 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:26:40,179 - octoprint.plugins.octoeverywhere - INFO - New print started; PrintId: tjpgk5Vvj7ziPvpfyKVvUb2ErNv0qxxYpWPKZcCR0O1ywnhqLxQ5IcXIPlLl file:CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode size:4295.9580078125 filament:12265
2023-08-23 09:26:40,180 - octoprint.plugins.stats - INFO - Printer Stats - on_event
2023-08-23 09:26:40,284 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:26:40,285 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:26:40,407 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:26:40,410 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:26:40,464 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:26:40,465 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:26:40,519 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:26:40,520 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:26:40,905 - octoprint.plugins.octoeverywhere - INFO - NotificationsHandler successfully sent 'started'
2023-08-23 09:26:50,137 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:27:00,141 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:27:07,721 - octoprint.util.comm - INFO - Telling the printer to set the busy interval to our "communicationBusy" timeout - 1s = 2s
2023-08-23 09:27:08,788 - octoprint.plugins.action_command_notification - INFO - Got a notification: Bed Heating...
2023-08-23 09:27:08,795 - octoprint.plugins.action_command_notification - INFO - Got a notification: Ender-3 S1 Plus Ready.
2023-08-23 09:27:10,145 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:27:10,175 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:27:10,177 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:27:10,283 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:27:10,284 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:27:10,385 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:27:10,387 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:27:10,444 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:27:10,445 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:27:10,502 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:27:10,503 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:27:11,278 - octoprint.plugins.octoeverywhere - INFO - Gadget HostLock set to: gadget-lon.octoeverywhere.com
2023-08-23 09:27:20,146 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:27:30,149 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:27:36,292 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:27:36,294 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:27:36,487 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:27:36,489 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:27:36,595 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:27:36,596 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:27:36,648 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:27:36,649 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:27:36,704 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:27:36,705 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:27:40,153 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:27:50,156 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:27:55,644 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:27:55,647 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:27:55,789 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:27:55,791 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:27:55,897 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:27:55,899 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:27:55,954 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:27:55,956 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:27:56,009 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:27:56,010 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:28:00,159 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:28:10,162 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:28:14,781 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:28:14,783 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:28:14,994 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:28:14,995 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:28:15,152 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:28:15,153 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:28:15,205 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:28:15,206 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:28:15,261 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:28:15,262 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:28:20,165 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:28:30,169 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:28:33,240 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:28:33,243 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:28:33,487 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:28:33,489 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:28:33,592 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:28:33,594 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:28:33,647 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:28:33,649 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:28:33,702 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:28:33,703 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:28:40,173 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:28:50,175 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:28:51,315 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:28:51,318 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:28:51,490 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:28:51,491 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:28:51,592 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:28:51,593 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:28:51,646 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:28:51,647 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:28:51,700 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:28:51,701 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:28:55,489 - octoprint.server.util.flask - INFO - Passively logging in user jonas from ::ffff:192.168.178.21
2023-08-23 09:28:55,492 - octoprint.access.users - INFO - Logged in user: jonas
2023-08-23 09:29:00,179 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:29:10,183 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:29:10,370 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:29:10,825 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:29:10,989 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:29:10,991 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:29:11,094 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:29:11,095 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:29:11,150 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:29:11,151 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:29:11,205 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:29:11,206 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:29:20,185 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:29:29,069 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:29:29,072 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:29:29,192 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:29:29,195 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:29:29,305 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:29:29,307 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:29:29,402 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:29:29,403 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:29:29,486 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:29:29,487 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:29:30,189 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:29:40,194 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:29:48,054 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:29:48,055 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:29:48,194 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:29:48,197 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:29:48,355 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:29:48,357 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:29:48,422 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:29:48,423 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:29:48,503 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:29:48,504 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:29:50,197 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:29:58,768 - octoprint.plugins.action_command_notification - INFO - Got a notification: Printing...
2023-08-23 09:29:58,774 - octoprint.plugins.action_command_notification - INFO - Got a notification: E1 Heating...
2023-08-23 09:30:00,202 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:30:06,569 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:30:06,571 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:30:06,697 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:30:06,720 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:30:06,827 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:30:06,828 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:30:06,881 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:30:06,882 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:30:06,935 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:30:06,936 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:30:10,206 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:30:20,208 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:30:28,848 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:30:28,850 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:30:28,996 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:30:28,998 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:30:29,100 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:30:29,101 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:30:29,153 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:30:29,154 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:30:29,247 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:30:29,249 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:30:30,218 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:30:40,221 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:30:49,654 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:30:49,655 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:30:49,800 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:30:49,801 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:30:49,902 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:30:49,903 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:30:49,957 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:30:49,958 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:30:50,018 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:30:50,019 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:30:50,223 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:31:00,227 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:31:10,230 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:31:12,633 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:31:12,636 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:31:12,799 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:31:12,801 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:31:12,924 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:31:12,925 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:31:12,981 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:31:12,982 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:31:13,038 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:31:13,039 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:31:20,232 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:31:30,235 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:31:35,982 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:31:35,983 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:31:36,102 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:31:36,103 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:31:36,259 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:31:36,260 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:31:36,319 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:31:36,320 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:31:36,373 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:31:36,374 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:31:40,238 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:31:50,240 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:31:58,868 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:31:58,869 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:31:59,000 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:31:59,002 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:31:59,106 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:31:59,107 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:31:59,162 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:31:59,163 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:31:59,265 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:31:59,267 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:32:00,244 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:32:10,247 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:32:20,249 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:32:22,215 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:32:22,218 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:32:22,400 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:32:22,401 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:32:22,542 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:32:22,543 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:32:22,608 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:32:22,609 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:32:22,661 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:32:22,662 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:32:30,253 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:32:40,256 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:32:45,268 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:32:45,270 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:32:45,404 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:32:45,405 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:32:45,509 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:32:45,510 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:32:45,562 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:32:45,563 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:32:45,618 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:32:45,619 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:32:50,259 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:33:00,263 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:33:09,061 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:33:09,063 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:33:09,203 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:33:09,205 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:33:09,312 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:33:09,313 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:33:09,378 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:33:09,379 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:33:09,465 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:33:09,473 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:33:10,266 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:33:10,943 - octoprint.plugins.action_command_notification - INFO - Got a notification: E1 Heating...
2023-08-23 09:33:20,269 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:33:20,552 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:33:20,554 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:33:20,704 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:33:20,705 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:33:20,814 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:33:20,816 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:33:20,873 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:33:20,874 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:33:20,933 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:33:20,934 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:33:21,163 - octoprint.plugins.octoeverywhere - INFO - NotificationsHandler successfully sent 'firstlayerdone'
2023-08-23 09:33:30,283 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:33:32,041 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:33:32,044 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:33:32,206 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:33:32,207 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:33:32,307 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:33:32,308 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:33:32,361 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:33:32,362 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:33:32,416 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:33:32,417 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:33:40,293 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:33:50,296 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:33:50,535 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 1017, current line = 1018
| Last lines in terminal:
| Recv: ok N1008 P0 B7
| Send: N1009 M204 S2000*108
| Recv: ok N1009 P0 B7
| Send: N1010 G0 F8250 X156.842 Y101.109*117
| Recv: ok N1010 P0 B7
| Send: N1011 M204 S500*82
| Recv: ok N1011 P0 B7
| Send: N1012 G1 F1650 X170.008 Y87.943 E334.62158*7
| Recv: ok N1012 P0 B7
| Send: N1013 M204 S2000*103
| Recv: ok N1013 P0 B7
| Send: N1014 G0 F8250 X170.008 Y87.095*72
| Recv: ok N1014 P0 B7
| Send: N1015 M204 S500*86
| Recv: ok N1015 P0 B7
| Send: N1016 G1 F1650 X155.994 Y101.109 E336.00585*51
| Recv: ok N1016 P0 B7
| Send: N1017 M117 CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode*28
| Recv: Error:checksum mismatch, Last Line: 1016
| Recv: Resend: 1017
2023-08-23 09:33:50,555 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 1017, current line = 1018
| Last lines in terminal:
| Recv: ok N1010 P0 B7
| Send: N1011 M204 S500*82
| Recv: ok N1011 P0 B7
| Send: N1012 G1 F1650 X170.008 Y87.943 E334.62158*7
| Recv: ok N1012 P0 B7
| Send: N1013 M204 S2000*103
| Recv: ok N1013 P0 B7
| Send: N1014 G0 F8250 X170.008 Y87.095*72
| Recv: ok N1014 P0 B7
| Send: N1015 M204 S500*86
| Recv: ok N1015 P0 B7
| Send: N1016 G1 F1650 X155.994 Y101.109 E336.00585*51
| Recv: ok N1016 P0 B7
| Send: N1017 M117 CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode*28
| Recv: Error:checksum mismatch, Last Line: 1016
| Recv: Resend: 1017
| Recv: ok
| Send: N1017 M117 CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode*28
| Recv: Error:checksum mismatch, Last Line: 1016
| Recv: Resend: 1017
2023-08-23 09:33:50,575 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 1017, current line = 1018
| Last lines in terminal:
| Recv: ok N1012 P0 B7
| Send: N1013 M204 S2000*103
| Recv: ok N1013 P0 B7
| Send: N1014 G0 F8250 X170.008 Y87.095*72
| Recv: ok N1014 P0 B7
| Send: N1015 M204 S500*86
| Recv: ok N1015 P0 B7
| Send: N1016 G1 F1650 X155.994 Y101.109 E336.00585*51
| Recv: ok N1016 P0 B7
| Send: N1017 M117 CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode*28
| Recv: Error:checksum mismatch, Last Line: 1016
| Recv: Resend: 1017
| Recv: ok
| Send: N1017 M117 CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode*28
| Recv: Error:checksum mismatch, Last Line: 1016
| Recv: Resend: 1017
| Recv: ok
| Send: N1017 M117 CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode*28
| Recv: Error:checksum mismatch, Last Line: 1016
| Recv: Resend: 1017
2023-08-23 09:33:50,594 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 1017, current line = 1018
| Last lines in terminal:
| Recv: ok N1014 P0 B7
| Send: N1015 M204 S500*86
| Recv: ok N1015 P0 B7
| Send: N1016 G1 F1650 X155.994 Y101.109 E336.00585*51
| Recv: ok N1016 P0 B7
| Send: N1017 M117 CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode*28
| Recv: Error:checksum mismatch, Last Line: 1016
| Recv: Resend: 1017
| Recv: ok
| Send: N1017 M117 CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode*28
| Recv: Error:checksum mismatch, Last Line: 1016
| Recv: Resend: 1017
| Recv: ok
| Send: N1017 M117 CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode*28
| Recv: Error:checksum mismatch, Last Line: 1016
| Recv: Resend: 1017
| Recv: ok
| Send: N1017 M117 CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode*28
| Recv: Error:checksum mismatch, Last Line: 1016
| Recv: Resend: 1017
2023-08-23 09:33:50,614 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 1017, current line = 1018
| Last lines in terminal:
| Recv: ok N1016 P0 B7
| Send: N1017 M117 CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode*28
| Recv: Error:checksum mismatch, Last Line: 1016
| Recv: Resend: 1017
| Recv: ok
| Send: N1017 M117 CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode*28
| Recv: Error:checksum mismatch, Last Line: 1016
| Recv: Resend: 1017
| Recv: ok
| Send: N1017 M117 CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode*28
| Recv: Error:checksum mismatch, Last Line: 1016
| Recv: Resend: 1017
| Recv: ok
| Send: N1017 M117 CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode*28
| Recv: Error:checksum mismatch, Last Line: 1016
| Recv: Resend: 1017
| Recv: ok
| Send: N1017 M117 CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode*28
| Recv: Error:checksum mismatch, Last Line: 1016
| Recv: Resend: 1017
2023-08-23 09:33:50,728 - octoprint.util.comm - WARNING - Printer keeps requesting line 1017 again and again, communication stuck
2023-08-23 09:33:50,728 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Error"
2023-08-23 09:33:50,733 - octoprint.util.comm - INFO - Force-sending M112 to the printer
2023-08-23 09:33:50,790 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error"
2023-08-23 09:33:50,809 - octoprint.plugins.excluderegion - INFO - Printing stopped: event=Error
2023-08-23 09:33:50,810 - octoprint.plugins.octoeverywhere - INFO - Gadget has stopped watching!
2023-08-23 09:33:50,815 - octoprint.plugins.octoeverywhere - INFO - RepeatTimer thread exit
2023-08-23 09:33:50,815 - octoprint.plugins.octoeverywhere - INFO - RepeatTimer thread exit
2023-08-23 09:33:50,815 - octoprint.plugins.octoeverywhere - INFO - RepeatTimer thread exit
2023-08-23 09:33:50,816 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:33:50,825 - octoprint.plugins.stats - INFO - Printer Stats - on_event
2023-08-23 09:33:50,826 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:33:50,905 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:33:50,906 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:33:50,998 - octoprint.plugins.tracking - INFO - Sent tracking event commerror_resend_loop, payload: {'commerror_text': 'Printer keeps requesting line 1017 again and again, communication stuck'}
2023-08-23 09:33:51,028 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:33:51,029 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:33:51,082 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:33:51,083 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:33:51,136 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:33:51,138 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:33:51,305 - octoprint.server - INFO - Starting autorefresh of serial port list
2023-08-23 09:33:51,305 - octoprint.util.comm - INFO - Firmware didn't send an 'ok' with their resend request. That's a known bug with some firmware variants out there. Simulating an ok to continue...
2023-08-23 09:33:51,313 - octoprint.plugins.action_command_notification - INFO - Notifications cleared
2023-08-23 09:33:51,330 - octoprint.plugins.stats - INFO - Printer Stats - on_event
2023-08-23 09:33:51,330 - octoprint.plugin - ERROR - Error while calling plugin stats
Traceback (most recent call last):
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugin/__init__.py", line 275, in call_plugin
    result = getattr(plugin, method)(*args, **kwargs)
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/util/__init__.py", line 1686, in wrapper
    return f(*args, **kwargs)
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint_stats/__init__.py", line 801, in on_event
    if "owner" not in payload:
TypeError: argument of type 'NoneType' is not iterable
2023-08-23 09:33:51,340 - octoprint.plugins.printhistory - INFO - fileData not found
2023-08-23 09:33:51,431 - octoprint.plugins.detailedprogress - INFO - Printing stopped. Detailed progress stopped.
2023-08-23 09:33:51,435 - octoprint.plugins.excluderegion - INFO - Printing stopped: event=PrintFailed
2023-08-23 09:33:51,438 - octoprint.plugin - ERROR - Error while calling plugin homeassistant
Traceback (most recent call last):
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugin/__init__.py", line 275, in call_plugin
    result = getattr(plugin, method)(*args, **kwargs)
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/util/__init__.py", line 1686, in wrapper
    return f(*args, **kwargs)
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint_homeassistant/__init__.py", line 1129, in on_event
    self.mqtt_publish(
TypeError: 'NoneType' object is not callable
2023-08-23 09:33:51,456 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:33:51,458 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:33:51,460 - octoprint.plugins.printhistory - INFO - Name: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:33:51,461 - octoprint.plugins.printhistory - INFO - Origin: local
2023-08-23 09:33:51,461 - octoprint.plugins.printhistory - INFO - Path: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:33:51,476 - octoprint.plugins.printhistory - INFO - Path_On_disk: /home/jonas/.octoprint/uploads/CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:33:51,496 - octoprint.plugins.printhistory - INFO - Got metadata from name
2023-08-23 09:33:51,526 - octoprint.plugins.printhistory - INFO - found fileData
2023-08-23 09:33:51,580 - octoprint.plugins.printhistory - INFO - Can't parse additional parameters from /home/jonas/.octoprint/uploads/CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:33:51,580 - octoprint.plugins.printhistory - INFO - {}
2023-08-23 09:33:51,588 - octoprint.plugins.tracking - INFO - Sent tracking event print_failed, payload: {'origin': 'local', 'file': 'd0998099b4ff8c4ea13c61013b0c3635573b9315', 'elapsed': 435, 'reason': 'error', 'commerror_text': 'Printer keeps requesting line 1017 again and again, communication stuck'}
2023-08-23 09:33:51,613 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:33:51,614 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:33:51,762 - octoprint.plugins.octoeverywhere - INFO - NotificationsHandler successfully sent 'error'
2023-08-23 09:33:51,764 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:33:52,066 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:33:52,069 - octoprint.plugins.stats - INFO - Printer Stats - on_event
2023-08-23 09:33:52,186 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:33:52,187 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:33:52,271 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:33:52,272 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:33:54,141 - octoprint.plugins.octoeverywhere - INFO - NotificationsHandler successfully sent 'failed'
2023-08-23 09:34:08,441 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Opening serial connection"
2023-08-23 09:34:08,452 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200
2023-08-23 09:34:08,499 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial connection" to "Connecting"
2023-08-23 09:34:08,508 - octoprint.server - INFO - Autorefresh of serial port list stopped
2023-08-23 09:34:33,103 - octoprint.util.comm - ERROR - Unexpected error while reading from serial port
Traceback (most recent call last):
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/util/comm.py", line 4081, in _readline
    ret = self._serial.readline()
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/util/comm.py", line 6832, in readline
    c = self.read(1)
  File "/home/jonas/oprint/lib/python3.9/site-packages/serial/serialposix.py", line 595, in read
    raise SerialException(
serial.serialutil.SerialException: device reports readiness to read but returned no data (device disconnected or multiple access on port?)
2023-08-23 09:34:33,125 - octoprint.util.comm - ERROR - Please see https://faq.octoprint.org/serialerror for possible reasons of this.
2023-08-23 09:34:33,130 - octoprint.util.comm - INFO - Changing monitoring state from "Connecting" to "Offline after error"
2023-08-23 09:34:33,138 - octoprint.server - INFO - Starting autorefresh of serial port list
2023-08-23 09:34:33,144 - octoprint.plugins.action_command_notification - INFO - Notifications cleared
2023-08-23 09:34:33,154 - octoprint.plugins.stats - INFO - Printer Stats - on_event
2023-08-23 09:34:33,154 - octoprint.plugin - ERROR - Error while calling plugin stats
Traceback (most recent call last):
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugin/__init__.py", line 275, in call_plugin
    result = getattr(plugin, method)(*args, **kwargs)
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/util/__init__.py", line 1686, in wrapper
    return f(*args, **kwargs)
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint_stats/__init__.py", line 801, in on_event
    if "owner" not in payload:
TypeError: argument of type 'NoneType' is not iterable
2023-08-23 09:34:33,166 - octoprint.server - INFO - Serial port list was updated, refreshing the port list in the frontend
2023-08-23 09:34:36,192 - octoprint.server - INFO - Serial port list was updated, refreshing the port list in the frontend
2023-08-23 09:35:32,226 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection"
2023-08-23 09:35:32,257 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 1 port/baudrate candidates: /dev/ttyUSB0@115200
2023-08-23 09:35:32,257 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200
2023-08-23 09:35:32,266 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200
2023-08-23 09:35:32,344 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s
2023-08-23 09:35:32,365 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2023-08-23 09:35:32,416 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Operational"
2023-08-23 09:35:32,441 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2023-08-23 09:35:32,516 - octoprint.plugins.firmwareupdater - INFO - Got CONNECTED event
2023-08-23 09:35:32,519 - octoprint.plugins.firmwareupdater - INFO - Run postflash flag is not set
2023-08-23 09:35:32,520 - octoprint.plugins.stats - INFO - Printer Stats - on_event
2023-08-23 09:35:32,547 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin abl10x10-v006-byTT (Aug 15 2023 13:10:26)"
2023-08-23 09:35:32,603 - octoprint.plugins.firmwareupdater - INFO - Setting BINARY_FILE_TRANSFER capability to False
2023-08-23 09:35:32,641 - octoprint.plugins.ABL_Expert - INFO - self.printer_cap[eeprom] is now 1

2023-08-23 09:35:32,648 - octoprint.plugins.z_probe_offset - INFO - Printer_cap[eeprom]:1
2023-08-23 09:35:32,678 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting
2023-08-23 09:35:32,691 - octoprint.plugins.ABL_Expert - INFO - self.printer_cap[autolevel] is now 1

2023-08-23 09:35:32,701 - octoprint.server - INFO - Autorefresh of serial port list stopped
2023-08-23 09:35:32,722 - octoprint.plugins.ABL_Expert - INFO - self.printer_cap[z_probe] is now 1

2023-08-23 09:35:32,728 - octoprint.plugins.z_probe_offset - INFO - Printer_cap[z_probe]:1
2023-08-23 09:35:32,763 - octoprint.plugins.ABL_Expert - INFO - self.printer_cap[leveling_data] is now 1

2023-08-23 09:35:32,818 - octoprint.util.comm - INFO - Firmware states that it supports emergency GCODEs to be sent without waiting for an acknowledgement first
2023-08-23 09:35:32,915 - octoprint.util.comm - INFO - Firmware states that it supports long filenames
2023-08-23 09:35:33,003 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {'firmware_name': 'Marlin abl10x10-v006-byTT (Aug 15 2023 13:10:26)', 'printer_port': 'AUTO', 'printer_baudrate': 115200}
2023-08-23 09:35:33,156 - octoprint.plugins.z_probe_offset - INFO - Z probe offset is now -3.05
2023-08-23 09:35:33,233 - octoprint.plugins.ABL_Expert - INFO - Grid mesh size is 10
2023-08-23 09:35:33,323 - octoprint.plugins.z_probe_offset - INFO - Z probe offset is now -3.05
2023-08-23 09:35:42,159 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2023-08-23 09:35:49,482 - octoprint.printer.standard.job - INFO - Print job selected - origin: local, path: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode, owner: jonas, user: jonas
2023-08-23 09:35:49,501 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting"
2023-08-23 09:35:49,505 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode, owner: jonas, user: jonas
2023-08-23 09:35:51,124 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2023-08-23 09:35:51,133 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Printing"
2023-08-23 09:35:51,181 - octoprint.plugins.action_command_notification - INFO - Got a notification: Bed Heating...
2023-08-23 09:35:51,205 - octoprint.plugins.action_command_notification - INFO - Got a notification: E1 Heating...
2023-08-23 09:35:51,296 - octoprint.plugins.action_command_notification - INFO - Got a notification: Bed Heating...
2023-08-23 09:35:51,307 - octoprint.plugins.action_command_notification - INFO - Got a notification: Ender-3 S1 Plus Ready.
2023-08-23 09:35:51,478 - octoprint.plugins.excluderegion - INFO - File selected, resetting internal state
2023-08-23 09:35:51,560 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid
2023-08-23 09:35:51,864 - octoprint.plugins.tracking - INFO - Sent tracking event print_started, payload: {'origin': 'local', 'file': 'd0998099b4ff8c4ea13c61013b0c3635573b9315'}
2023-08-23 09:35:52,628 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 35113, 'printer_state': 'PRINTING'}
2023-08-23 09:35:52,825 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk
2023-08-23 09:35:53,101 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid
2023-08-23 09:35:53,293 - octoprint.util.comm - INFO - Printer seems to support the busy protocol, will adjust timeouts and set busy interval accordingly
2023-08-23 09:35:53,476 - octoprint.plugins.detailedprogress - INFO - Printing started. Detailed progress started.
2023-08-23 09:35:53,493 - octoprint.plugins.excluderegion - INFO - Printing started
2023-08-23 09:35:53,498 - octoprint.plugin - ERROR - Error while calling plugin homeassistant
Traceback (most recent call last):
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugin/__init__.py", line 275, in call_plugin
    result = getattr(plugin, method)(*args, **kwargs)
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/util/__init__.py", line 1686, in wrapper
    return f(*args, **kwargs)
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint_homeassistant/__init__.py", line 1115, in on_event
    self.mqtt_publish(
TypeError: 'NoneType' object is not callable
2023-08-23 09:35:53,507 - octoprint.plugins.octoeverywhere - INFO - Gadget HostLock cleared
2023-08-23 09:35:53,507 - octoprint.plugins.octoeverywhere - INFO - Gadget is now watching!
2023-08-23 09:35:53,515 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:35:53,516 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:35:53,519 - octoprint.plugins.octoeverywhere - INFO - New print started; PrintId: fJyky4nFLtYLCbaB87PgXqhHGpcPpM94XCN9wwHHaSgZTcZlgGT31MmG9NTw file:CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode size:4295.9580078125 filament:12265
2023-08-23 09:35:53,520 - octoprint.plugins.stats - INFO - Printer Stats - on_event
2023-08-23 09:35:53,610 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:35:53,611 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:35:53,719 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:35:53,720 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:35:53,771 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:35:53,773 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:35:53,843 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:35:53,844 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:35:54,466 - octoprint.plugins.octoeverywhere - INFO - NotificationsHandler successfully sent 'started'
2023-08-23 09:36:03,486 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:36:13,487 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:36:23,488 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:36:23,513 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:36:23,514 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:36:23,610 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:36:23,612 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:36:23,713 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:36:23,714 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:36:23,767 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:36:23,768 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:36:23,825 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:36:23,826 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:36:24,289 - octoprint.plugins.octoeverywhere - INFO - Gadget HostLock set to: gadget-ams.octoeverywhere.com
2023-08-23 09:36:33,490 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:36:35,482 - octoprint.util.comm - INFO - Telling the printer to set the busy interval to our "communicationBusy" timeout - 1s = 2s
2023-08-23 09:36:36,807 - octoprint.plugins.action_command_notification - INFO - Got a notification: Printing...
2023-08-23 09:36:36,811 - octoprint.plugins.action_command_notification - INFO - Got a notification: E1 Heating...
2023-08-23 09:36:43,492 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:36:44,299 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:36:44,302 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:36:44,413 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:36:44,414 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:36:44,547 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:36:44,548 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:36:44,602 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:36:44,603 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:36:44,656 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:36:44,657 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:36:53,493 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:37:03,495 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:37:07,140 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:37:07,143 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:37:07,312 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:37:07,314 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:37:07,425 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:37:07,426 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:37:07,522 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:37:07,524 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:37:07,619 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:37:07,621 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:37:13,497 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:37:23,501 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:37:30,368 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:37:30,370 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:37:30,516 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:37:30,517 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:37:30,628 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:37:30,629 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:37:30,687 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:37:30,688 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:37:30,774 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:37:30,776 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:37:33,502 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:37:43,504 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:37:53,342 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:37:53,345 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:37:53,511 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:37:53,520 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:37:53,525 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:37:53,669 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:37:53,670 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:37:53,727 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:37:53,728 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:37:53,787 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:37:53,789 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:38:03,513 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:38:13,514 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:38:16,869 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:38:16,870 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:38:17,019 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:38:17,020 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:38:17,129 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:38:17,130 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:38:17,192 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:38:17,194 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:38:17,285 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:38:17,286 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:38:23,516 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:38:33,518 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:38:39,999 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:38:40,000 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:38:40,118 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:38:40,119 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:38:40,274 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:38:40,275 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:38:40,329 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:38:40,330 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:38:40,384 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:38:40,385 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:38:43,520 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:38:53,521 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:39:03,012 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:39:03,013 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:39:03,117 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:39:03,119 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:39:03,244 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:39:03,246 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:39:03,340 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:39:03,341 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:39:03,401 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:39:03,403 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:39:03,523 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:39:13,525 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:39:23,526 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:39:25,978 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:39:25,979 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:39:26,117 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:39:26,119 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:39:26,237 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:39:26,240 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:39:26,328 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:39:26,329 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:39:26,383 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:39:26,384 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:39:33,528 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:39:43,530 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:39:48,944 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:39:48,946 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:39:49,108 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:39:49,111 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:39:49,214 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:39:49,215 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:39:49,267 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:39:49,268 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:39:49,320 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:39:49,322 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:39:53,532 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:40:03,534 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:40:11,929 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:40:11,931 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:40:12,008 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:40:12,010 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:40:12,116 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:40:12,118 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:40:12,178 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:40:12,182 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:40:12,265 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:40:12,267 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:40:13,536 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:40:15,648 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:40:15,649 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:40:15,808 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:40:15,809 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:40:15,915 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:40:15,916 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:40:15,970 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:40:15,971 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:40:16,033 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:40:16,034 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:40:16,403 - octoprint.plugins.octoeverywhere - INFO - NotificationsHandler successfully sent 'firstlayerdone'
2023-08-23 09:40:23,537 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:40:33,539 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:40:35,448 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:40:35,450 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:40:35,607 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:40:35,609 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:40:35,714 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:40:35,715 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:40:35,774 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:40:35,775 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:40:35,835 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:40:35,836 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:40:43,544 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:40:53,546 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:40:53,603 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 1007, current line = 1008
| Last lines in terminal:
| Send: N999 M204 S500*106
| Recv: ok N999 P0 B7
| Send: N1000 G1 F1650 X150.902 Y101.109 E346.07187*56
| Recv: ok N1000 P0 B7
| Send: N1001 M204 S2000*100
| Recv: ok N1001 P0 B7
| Send: N1002 G0 F8250 X150.054 Y101.109*127
| Recv: ok N1002 P0 B7
| Send: N1003 M204 S500*81
| Recv: ok N1003 P0 B7
| Send: N1004 G1 F1650 X170.008 Y81.155 E348.04288*12
| Recv:  T:199.74 /200.00 (438.31) B:60.01 /60.00 (3427.81) @:54 B@:31
| Recv: ok N1004 P0 B7
| Send: N1005 M204 S2000*96
| Recv: ok N1005 P0 B7
| Send: N1006 G0 F8250 X170.008 Y80.306*69
| Recv: ok N1006 P0 B7
| Send: N1007 M117 CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode*29
| Recv: Error:checksum mismatch, Last Line: 1006
| Recv: Resend: 1007
2023-08-23 09:40:53,623 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 1007, current line = 1008
| Last lines in terminal:
| Send: N1001 M204 S2000*100
| Recv: ok N1001 P0 B7
| Send: N1002 G0 F8250 X150.054 Y101.109*127
| Recv: ok N1002 P0 B7
| Send: N1003 M204 S500*81
| Recv: ok N1003 P0 B7
| Send: N1004 G1 F1650 X170.008 Y81.155 E348.04288*12
| Recv:  T:199.74 /200.00 (438.31) B:60.01 /60.00 (3427.81) @:54 B@:31
| Recv: ok N1004 P0 B7
| Send: N1005 M204 S2000*96
| Recv: ok N1005 P0 B7
| Send: N1006 G0 F8250 X170.008 Y80.306*69
| Recv: ok N1006 P0 B7
| Send: N1007 M117 CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode*29
| Recv: Error:checksum mismatch, Last Line: 1006
| Recv: Resend: 1007
| Recv: ok
| Send: N1007 M117 CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode*29
| Recv: Error:checksum mismatch, Last Line: 1006
| Recv: Resend: 1007
2023-08-23 09:40:53,642 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 1007, current line = 1008
| Last lines in terminal:
| Send: N1003 M204 S500*81
| Recv: ok N1003 P0 B7
| Send: N1004 G1 F1650 X170.008 Y81.155 E348.04288*12
| Recv:  T:199.74 /200.00 (438.31) B:60.01 /60.00 (3427.81) @:54 B@:31
| Recv: ok N1004 P0 B7
| Send: N1005 M204 S2000*96
| Recv: ok N1005 P0 B7
| Send: N1006 G0 F8250 X170.008 Y80.306*69
| Recv: ok N1006 P0 B7
| Send: N1007 M117 CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode*29
| Recv: Error:checksum mismatch, Last Line: 1006
| Recv: Resend: 1007
| Recv: ok
| Send: N1007 M117 CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode*29
| Recv: Error:checksum mismatch, Last Line: 1006
| Recv: Resend: 1007
| Recv: ok
| Send: N1007 M117 CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode*29
| Recv: Error:checksum mismatch, Last Line: 1006
| Recv: Resend: 1007
2023-08-23 09:40:53,661 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 1007, current line = 1008
| Last lines in terminal:
| Recv: ok N1004 P0 B7
| Send: N1005 M204 S2000*96
| Recv: ok N1005 P0 B7
| Send: N1006 G0 F8250 X170.008 Y80.306*69
| Recv: ok N1006 P0 B7
| Send: N1007 M117 CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode*29
| Recv: Error:checksum mismatch, Last Line: 1006
| Recv: Resend: 1007
| Recv: ok
| Send: N1007 M117 CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode*29
| Recv: Error:checksum mismatch, Last Line: 1006
| Recv: Resend: 1007
| Recv: ok
| Send: N1007 M117 CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode*29
| Recv: Error:checksum mismatch, Last Line: 1006
| Recv: Resend: 1007
| Recv: ok
| Send: N1007 M117 CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode*29
| Recv: Error:checksum mismatch, Last Line: 1006
| Recv: Resend: 1007
2023-08-23 09:40:53,680 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 1007, current line = 1008
| Last lines in terminal:
| Recv: ok N1006 P0 B7
| Send: N1007 M117 CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode*29
| Recv: Error:checksum mismatch, Last Line: 1006
| Recv: Resend: 1007
| Recv: ok
| Send: N1007 M117 CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode*29
| Recv: Error:checksum mismatch, Last Line: 1006
| Recv: Resend: 1007
| Recv: ok
| Send: N1007 M117 CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode*29
| Recv: Error:checksum mismatch, Last Line: 1006
| Recv: Resend: 1007
| Recv: ok
| Send: N1007 M117 CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode*29
| Recv: Error:checksum mismatch, Last Line: 1006
| Recv: Resend: 1007
| Recv: ok
| Send: N1007 M117 CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode*29
| Recv: Error:checksum mismatch, Last Line: 1006
| Recv: Resend: 1007
2023-08-23 09:40:53,788 - octoprint.util.comm - WARNING - Printer keeps requesting line 1007 again and again, communication stuck
2023-08-23 09:40:53,789 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Error"
2023-08-23 09:40:53,793 - octoprint.util.comm - INFO - Force-sending M112 to the printer
2023-08-23 09:40:53,838 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error"
2023-08-23 09:40:53,869 - octoprint.plugins.excluderegion - INFO - Printing stopped: event=Error
2023-08-23 09:40:53,870 - octoprint.plugins.octoeverywhere - INFO - Gadget has stopped watching!
2023-08-23 09:40:53,875 - octoprint.plugins.octoeverywhere - INFO - RepeatTimer thread exit
2023-08-23 09:40:53,877 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:40:53,878 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:40:53,892 - octoprint.plugins.octoeverywhere - INFO - RepeatTimer thread exit
2023-08-23 09:40:53,892 - octoprint.plugins.octoeverywhere - INFO - RepeatTimer thread exit
2023-08-23 09:40:53,906 - octoprint.plugins.stats - INFO - Printer Stats - on_event
2023-08-23 09:40:54,011 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:40:54,012 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:40:54,037 - octoprint.plugins.tracking - INFO - Sent tracking event commerror_resend_loop, payload: {'commerror_text': 'Printer keeps requesting line 1007 again and again, communication stuck'}
2023-08-23 09:40:54,124 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:40:54,126 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:40:54,183 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:40:54,184 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:40:54,254 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:40:54,256 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:40:54,324 - octoprint.server - INFO - Starting autorefresh of serial port list
2023-08-23 09:40:54,341 - octoprint.plugins.action_command_notification - INFO - Notifications cleared
2023-08-23 09:40:54,358 - octoprint.util.comm - INFO - Firmware didn't send an 'ok' with their resend request. That's a known bug with some firmware variants out there. Simulating an ok to continue...
2023-08-23 09:40:54,384 - octoprint.plugins.stats - INFO - Printer Stats - on_event
2023-08-23 09:40:54,385 - octoprint.plugin - ERROR - Error while calling plugin stats
Traceback (most recent call last):
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugin/__init__.py", line 275, in call_plugin
    result = getattr(plugin, method)(*args, **kwargs)
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/util/__init__.py", line 1686, in wrapper
    return f(*args, **kwargs)
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint_stats/__init__.py", line 801, in on_event
    if "owner" not in payload:
TypeError: argument of type 'NoneType' is not iterable
2023-08-23 09:40:54,395 - octoprint.plugins.printhistory - INFO - fileData not found
2023-08-23 09:40:54,500 - octoprint.plugins.detailedprogress - INFO - Printing stopped. Detailed progress stopped.
2023-08-23 09:40:54,504 - octoprint.plugins.excluderegion - INFO - Printing stopped: event=PrintFailed
2023-08-23 09:40:54,513 - octoprint.plugin - ERROR - Error while calling plugin homeassistant
Traceback (most recent call last):
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugin/__init__.py", line 275, in call_plugin
    result = getattr(plugin, method)(*args, **kwargs)
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/util/__init__.py", line 1686, in wrapper
    return f(*args, **kwargs)
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint_homeassistant/__init__.py", line 1129, in on_event
    self.mqtt_publish(
TypeError: 'NoneType' object is not callable
2023-08-23 09:40:54,519 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:40:54,520 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:40:54,524 - octoprint.plugins.printhistory - INFO - Name: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:40:54,524 - octoprint.plugins.printhistory - INFO - Origin: local
2023-08-23 09:40:54,524 - octoprint.plugins.printhistory - INFO - Path: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:40:54,541 - octoprint.plugins.printhistory - INFO - Path_On_disk: /home/jonas/.octoprint/uploads/CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:40:54,559 - octoprint.plugins.printhistory - INFO - Got metadata from name
2023-08-23 09:40:54,566 - octoprint.plugins.printhistory - INFO - found fileData
2023-08-23 09:40:54,632 - octoprint.plugins.printhistory - INFO - Can't parse additional parameters from /home/jonas/.octoprint/uploads/CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:40:54,632 - octoprint.plugins.printhistory - INFO - {}
2023-08-23 09:40:54,710 - octoprint.plugins.tracking - INFO - Sent tracking event print_failed, payload: {'origin': 'local', 'file': 'd0998099b4ff8c4ea13c61013b0c3635573b9315', 'elapsed': 304, 'reason': 'error', 'commerror_text': 'Printer keeps requesting line 1007 again and again, communication stuck'}
2023-08-23 09:40:54,712 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:40:54,713 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:40:54,873 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:40:54,874 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:40:54,960 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:40:54,961 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:40:55,034 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:40:55,035 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:40:55,107 - octoprint.plugins.octoeverywhere - INFO - NotificationsHandler successfully sent 'error'
2023-08-23 09:40:55,717 - octoprint.plugins.stats - INFO - Printer Stats - on_event
2023-08-23 09:40:56,555 - octoprint.plugins.octoeverywhere - INFO - NotificationsHandler successfully sent 'failed'
2023-08-23 09:42:11,958 - octoprint.server - INFO - Serial port list was updated, refreshing the port list in the frontend
2023-08-23 09:43:31,671 - octoprint.server - INFO - Serial port list was updated, refreshing the port list in the frontend
2023-08-23 09:43:41,739 - octoprint.server - INFO - Serial port list was updated, refreshing the port list in the frontend
2023-08-23 09:43:45,768 - octoprint.server - INFO - Serial port list was updated, refreshing the port list in the frontend
2023-08-23 09:43:56,506 - octoprint.access.users - INFO - Cleaning up user session 12B5EAC48B8E4708865320AEB7FC4FB9 for user jonas
2023-08-23 09:43:56,507 - octoprint.access.users - INFO - Logged out user: jonas
2023-08-23 09:44:05,141 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection"
2023-08-23 09:44:05,164 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 1 port/baudrate candidates: /dev/ttyUSB0@115200
2023-08-23 09:44:05,165 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200
2023-08-23 09:44:05,167 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200
2023-08-23 09:44:05,236 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s
2023-08-23 09:44:05,264 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2023-08-23 09:44:05,340 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Operational"
2023-08-23 09:44:05,354 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2023-08-23 09:44:05,428 - octoprint.plugins.firmwareupdater - INFO - Got CONNECTED event
2023-08-23 09:44:05,431 - octoprint.plugins.firmwareupdater - INFO - Run postflash flag is not set
2023-08-23 09:44:05,432 - octoprint.plugins.stats - INFO - Printer Stats - on_event
2023-08-23 09:44:05,491 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin abl10x10-v006-byTT (Aug 15 2023 13:10:26)"
2023-08-23 09:44:05,566 - octoprint.plugins.firmwareupdater - INFO - Setting BINARY_FILE_TRANSFER capability to False
2023-08-23 09:44:05,601 - octoprint.plugins.ABL_Expert - INFO - self.printer_cap[eeprom] is now 1

2023-08-23 09:44:05,608 - octoprint.plugins.z_probe_offset - INFO - Printer_cap[eeprom]:1
2023-08-23 09:44:05,656 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting
2023-08-23 09:44:05,685 - octoprint.plugins.ABL_Expert - INFO - self.printer_cap[autolevel] is now 1

2023-08-23 09:44:05,697 - octoprint.plugins.ABL_Expert - INFO - self.printer_cap[z_probe] is now 1

2023-08-23 09:44:05,705 - octoprint.plugins.z_probe_offset - INFO - Printer_cap[z_probe]:1
2023-08-23 09:44:05,724 - octoprint.plugins.ABL_Expert - INFO - self.printer_cap[leveling_data] is now 1

2023-08-23 09:44:05,739 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {'firmware_name': 'Marlin abl10x10-v006-byTT (Aug 15 2023 13:10:26)', 'printer_port': 'AUTO', 'printer_baudrate': 115200}
2023-08-23 09:44:05,800 - octoprint.util.comm - INFO - Firmware states that it supports emergency GCODEs to be sent without waiting for an acknowledgement first
2023-08-23 09:44:05,886 - octoprint.util.comm - INFO - Firmware states that it supports long filenames
2023-08-23 09:44:05,896 - octoprint.server - INFO - Autorefresh of serial port list stopped
2023-08-23 09:44:06,151 - octoprint.plugins.z_probe_offset - INFO - Z probe offset is now -3.05
2023-08-23 09:44:06,239 - octoprint.plugins.ABL_Expert - INFO - Grid mesh size is 10
2023-08-23 09:44:06,349 - octoprint.plugins.z_probe_offset - INFO - Z probe offset is now -3.05
2023-08-23 09:44:13,236 - octoprint.filemanager.analysis - INFO - Starting analysis of local:CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:44:13,312 - octoprint.plugins.stats - INFO - Printer Stats - on_event
2023-08-23 09:44:16,997 - octoprint.filemanager.analysis - INFO - Analysis of entry local:CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode finished, needed 3.76s
2023-08-23 09:44:17,506 - octoprint.printer.standard.job - INFO - Print job selected - origin: local, path: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode, owner: jonas, user: jonas
2023-08-23 09:44:17,520 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting"
2023-08-23 09:44:17,534 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode, owner: jonas, user: jonas
2023-08-23 09:44:19,128 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2023-08-23 09:44:19,138 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Printing"
2023-08-23 09:44:19,179 - octoprint.plugins.action_command_notification - INFO - Got a notification: Bed Heating...
2023-08-23 09:44:19,197 - octoprint.plugins.action_command_notification - INFO - Got a notification: E1 Heating...
2023-08-23 09:44:19,290 - octoprint.plugins.excluderegion - INFO - File selected, resetting internal state
2023-08-23 09:44:19,371 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid
2023-08-23 09:44:19,564 - octoprint.plugins.tracking - INFO - Sent tracking event print_started, payload: {'origin': 'local', 'file': 'd0998099b4ff8c4ea13c61013b0c3635573b9315'}
2023-08-23 09:44:20,415 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk
2023-08-23 09:44:21,253 - octoprint.util.comm - INFO - Printer seems to support the busy protocol, will adjust timeouts and set busy interval accordingly
2023-08-23 09:44:21,323 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid
2023-08-23 09:44:21,397 - octoprint.plugins.detailedprogress - INFO - Printing started. Detailed progress started.
2023-08-23 09:44:21,414 - octoprint.plugins.excluderegion - INFO - Printing started
2023-08-23 09:44:21,417 - octoprint.plugin - ERROR - Error while calling plugin homeassistant
Traceback (most recent call last):
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugin/__init__.py", line 275, in call_plugin
    result = getattr(plugin, method)(*args, **kwargs)
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/util/__init__.py", line 1686, in wrapper
    return f(*args, **kwargs)
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint_homeassistant/__init__.py", line 1115, in on_event
    self.mqtt_publish(
TypeError: 'NoneType' object is not callable
2023-08-23 09:44:21,432 - octoprint.plugins.octoeverywhere - INFO - Gadget HostLock cleared
2023-08-23 09:44:21,432 - octoprint.plugins.octoeverywhere - INFO - Gadget is now watching!
2023-08-23 09:44:21,438 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:44:21,440 - octoprint.plugins.octoeverywhere - INFO - New print started; PrintId: DLOqnCs5OdQO24LkITgheGiZ4EtKYyuYhBuddZ6c6s0hWJwznvoDZfXsuqa8 file:CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode size:4291.9619140625 filament:12265
2023-08-23 09:44:21,441 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:44:21,444 - octoprint.plugins.stats - INFO - Printer Stats - on_event
2023-08-23 09:44:21,613 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:44:21,614 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:44:21,721 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:44:21,722 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:44:21,781 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:44:21,782 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:44:21,863 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:44:21,864 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:44:22,270 - octoprint.plugins.octoeverywhere - INFO - NotificationsHandler successfully sent 'started'
2023-08-23 09:44:31,421 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:44:36,197 - octoprint.util.comm - INFO - Telling the printer to set the busy interval to our "communicationBusy" timeout - 1s = 2s
2023-08-23 09:44:37,006 - octoprint.plugins.action_command_notification - INFO - Got a notification: Bed Heating...
2023-08-23 09:44:37,011 - octoprint.plugins.action_command_notification - INFO - Got a notification: Ender-3 S1 Plus Ready.
2023-08-23 09:44:41,433 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:44:51,441 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:44:51,459 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:44:51,461 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:44:51,624 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:44:51,626 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:44:51,728 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:44:51,730 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:44:51,784 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:44:51,785 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:44:51,839 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:44:51,841 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:44:52,637 - octoprint.plugins.octoeverywhere - INFO - Gadget HostLock set to: gadget-tor.octoeverywhere.com
2023-08-23 09:45:01,478 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:45:11,489 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:45:12,643 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:45:12,646 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:45:12,831 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:45:12,833 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:45:12,935 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:45:12,936 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:45:12,990 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:45:12,991 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:45:13,051 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:45:13,054 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:45:21,492 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:45:30,697 - octoprint.plugins.action_command_notification - INFO - Got a notification: Printing...
2023-08-23 09:45:31,496 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:45:32,999 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:45:33,001 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:45:33,137 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:45:33,138 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:45:33,240 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:45:33,241 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:45:33,301 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:45:33,302 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:45:33,388 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:45:33,390 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:45:41,506 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:45:51,517 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:45:52,141 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:45:52,143 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:45:52,337 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:45:52,339 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:45:52,495 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:45:52,496 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:45:52,574 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:45:52,575 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:45:52,647 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:45:52,648 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:46:01,531 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:46:10,675 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:46:10,677 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:46:10,740 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:46:10,741 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:46:10,842 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:46:10,844 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:46:10,897 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:46:10,898 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:46:10,953 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:46:10,954 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:46:11,535 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:46:21,540 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:46:30,612 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:46:30,614 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:46:30,737 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:46:30,739 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:46:30,843 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:46:30,844 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:46:30,897 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:46:30,898 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:46:30,955 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:46:30,956 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:46:31,544 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:46:41,546 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:46:48,818 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:46:48,822 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:46:48,939 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:46:48,940 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:46:49,041 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:46:49,043 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:46:49,095 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:46:49,096 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:46:49,149 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:46:49,150 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:46:51,549 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:47:01,551 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:47:08,748 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:47:08,749 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:47:08,839 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:47:08,840 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:47:08,940 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:47:08,941 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:47:08,994 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:47:08,995 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:47:09,048 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:47:09,049 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:47:11,553 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:47:21,556 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:47:27,163 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:47:27,166 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:47:27,342 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:47:27,343 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:47:27,453 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:47:27,454 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:47:27,512 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:47:27,515 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:47:27,609 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:47:27,610 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:47:31,558 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:47:41,559 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:47:46,653 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:47:46,656 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:47:46,842 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:47:46,844 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:47:46,948 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:47:46,949 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:47:47,006 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:47:47,007 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:47:47,065 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:47:47,066 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:47:51,561 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:48:01,563 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:48:04,974 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:48:04,977 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:48:05,145 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:48:05,146 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:48:05,249 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:48:05,250 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:48:05,306 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:48:05,307 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:48:05,364 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:48:05,365 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:48:11,565 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:48:21,566 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:48:26,544 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:48:26,547 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:48:26,743 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:48:26,744 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:48:26,854 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:48:26,855 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:48:26,915 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:48:26,916 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:48:26,973 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:48:26,974 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:48:31,568 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:48:39,637 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:48:39,638 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:48:39,745 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:48:39,746 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:48:39,859 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:48:39,860 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:48:39,916 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:48:39,917 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:48:39,975 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:48:39,976 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:48:40,282 - octoprint.plugins.octoeverywhere - INFO - NotificationsHandler successfully sent 'firstlayerdone'
2023-08-23 09:48:41,570 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:48:50,094 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:48:50,095 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:48:50,247 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:48:50,250 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:48:50,386 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:48:50,388 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:48:50,442 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:48:50,443 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:48:50,503 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:48:50,506 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:48:51,571 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:49:01,573 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:49:11,575 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:49:13,613 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:49:13,614 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:49:13,746 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:49:13,747 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:49:13,855 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:49:13,856 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:49:13,913 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:49:13,915 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:49:13,973 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:49:13,974 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:49:21,576 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:49:22,139 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 1029, current line = 1030
| Last lines in terminal:
| Send: N1021 M204 S2000*102
| Recv: ok N1021 P0 B7
| Send: N1022 G0 F8250 X170.008 Y42.971*71
| Recv: ok N1022 P0 B7
| Send: N1023 M204 S500*83
| Recv: ok N1023 P0 B7
| Send: N1024 G1 F1650 X146.47 Y66.509 E357.28915*59
| Recv: ok N1024 P0 B7
| Send: N1025 M204 S2000*98
| Recv: ok N1025 P0 B7
| Send: N1026 G0 F8250 X145.622 Y66.509*78
| Recv: ok N1026 P0 B7
| Send: N1027 M204 S500*87
| Recv: ok N1027 P0 B7
| Send: N1028 G1 F1650 X170.008 Y42.123 E359.69794*15
| Recv:  T:199.82 /200.00 (437.56) B:60.01 /60.00 (3427.81) @:54 B@:30
| Recv: ok N1028 P0 B7
| Send: N1029 M117 CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode*17
| Recv: Error:checksum mismatch, Last Line: 1028
| Recv: Resend: 1029
2023-08-23 09:49:22,159 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 1029, current line = 1030
| Last lines in terminal:
| Send: N1023 M204 S500*83
| Recv: ok N1023 P0 B7
| Send: N1024 G1 F1650 X146.47 Y66.509 E357.28915*59
| Recv: ok N1024 P0 B7
| Send: N1025 M204 S2000*98
| Recv: ok N1025 P0 B7
| Send: N1026 G0 F8250 X145.622 Y66.509*78
| Recv: ok N1026 P0 B7
| Send: N1027 M204 S500*87
| Recv: ok N1027 P0 B7
| Send: N1028 G1 F1650 X170.008 Y42.123 E359.69794*15
| Recv:  T:199.82 /200.00 (437.56) B:60.01 /60.00 (3427.81) @:54 B@:30
| Recv: ok N1028 P0 B7
| Send: N1029 M117 CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode*17
| Recv: Error:checksum mismatch, Last Line: 1028
| Recv: Resend: 1029
| Recv: ok
| Send: N1029 M117 CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode*17
| Recv: Error:checksum mismatch, Last Line: 1028
| Recv: Resend: 1029
2023-08-23 09:49:22,178 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 1029, current line = 1030
| Last lines in terminal:
| Send: N1025 M204 S2000*98
| Recv: ok N1025 P0 B7
| Send: N1026 G0 F8250 X145.622 Y66.509*78
| Recv: ok N1026 P0 B7
| Send: N1027 M204 S500*87
| Recv: ok N1027 P0 B7
| Send: N1028 G1 F1650 X170.008 Y42.123 E359.69794*15
| Recv:  T:199.82 /200.00 (437.56) B:60.01 /60.00 (3427.81) @:54 B@:30
| Recv: ok N1028 P0 B7
| Send: N1029 M117 CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode*17
| Recv: Error:checksum mismatch, Last Line: 1028
| Recv: Resend: 1029
| Recv: ok
| Send: N1029 M117 CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode*17
| Recv: Error:checksum mismatch, Last Line: 1028
| Recv: Resend: 1029
| Recv: ok
| Send: N1029 M117 CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode*17
| Recv: Error:checksum mismatch, Last Line: 1028
| Recv: Resend: 1029
2023-08-23 09:49:22,198 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 1029, current line = 1030
| Last lines in terminal:
| Send: N1027 M204 S500*87
| Recv: ok N1027 P0 B7
| Send: N1028 G1 F1650 X170.008 Y42.123 E359.69794*15
| Recv:  T:199.82 /200.00 (437.56) B:60.01 /60.00 (3427.81) @:54 B@:30
| Recv: ok N1028 P0 B7
| Send: N1029 M117 CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode*17
| Recv: Error:checksum mismatch, Last Line: 1028
| Recv: Resend: 1029
| Recv: ok
| Send: N1029 M117 CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode*17
| Recv: Error:checksum mismatch, Last Line: 1028
| Recv: Resend: 1029
| Recv: ok
| Send: N1029 M117 CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode*17
| Recv: Error:checksum mismatch, Last Line: 1028
| Recv: Resend: 1029
| Recv: ok
| Send: N1029 M117 CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode*17
| Recv: Error:checksum mismatch, Last Line: 1028
| Recv: Resend: 1029
2023-08-23 09:49:22,217 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 1029, current line = 1030
| Last lines in terminal:
| Recv: ok N1028 P0 B7
| Send: N1029 M117 CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode*17
| Recv: Error:checksum mismatch, Last Line: 1028
| Recv: Resend: 1029
| Recv: ok
| Send: N1029 M117 CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode*17
| Recv: Error:checksum mismatch, Last Line: 1028
| Recv: Resend: 1029
| Recv: ok
| Send: N1029 M117 CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode*17
| Recv: Error:checksum mismatch, Last Line: 1028
| Recv: Resend: 1029
| Recv: ok
| Send: N1029 M117 CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode*17
| Recv: Error:checksum mismatch, Last Line: 1028
| Recv: Resend: 1029
| Recv: ok
| Send: N1029 M117 CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode*17
| Recv: Error:checksum mismatch, Last Line: 1028
| Recv: Resend: 1029
2023-08-23 09:49:22,334 - octoprint.util.comm - WARNING - Printer keeps requesting line 1029 again and again, communication stuck
2023-08-23 09:49:22,335 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Error"
2023-08-23 09:49:22,343 - octoprint.util.comm - INFO - Force-sending M112 to the printer
2023-08-23 09:49:22,439 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error"
2023-08-23 09:49:22,473 - octoprint.plugins.excluderegion - INFO - Printing stopped: event=Error
2023-08-23 09:49:22,474 - octoprint.plugins.octoeverywhere - INFO - Gadget has stopped watching!
2023-08-23 09:49:22,475 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:49:22,477 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:49:22,480 - octoprint.plugins.stats - INFO - Printer Stats - on_event
2023-08-23 09:49:22,481 - octoprint.plugins.octoeverywhere - INFO - RepeatTimer thread exit
2023-08-23 09:49:22,481 - octoprint.plugins.octoeverywhere - INFO - RepeatTimer thread exit
2023-08-23 09:49:22,481 - octoprint.plugins.octoeverywhere - INFO - RepeatTimer thread exit
2023-08-23 09:49:22,644 - octoprint.plugins.tracking - INFO - Sent tracking event commerror_resend_loop, payload: {'commerror_text': 'Printer keeps requesting line 1029 again and again, communication stuck'}
2023-08-23 09:49:22,648 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:49:22,649 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:49:22,749 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:49:22,750 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:49:22,803 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:49:22,804 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:49:22,857 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:49:22,858 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:49:22,969 - octoprint.util.comm - INFO - Firmware didn't send an 'ok' with their resend request. That's a known bug with some firmware variants out there. Simulating an ok to continue...
2023-08-23 09:49:23,280 - octoprint.server - INFO - Starting autorefresh of serial port list
2023-08-23 09:49:23,284 - octoprint.plugins.action_command_notification - INFO - Notifications cleared
2023-08-23 09:49:23,305 - octoprint.plugins.stats - INFO - Printer Stats - on_event
2023-08-23 09:49:23,305 - octoprint.plugin - ERROR - Error while calling plugin stats
Traceback (most recent call last):
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugin/__init__.py", line 275, in call_plugin
    result = getattr(plugin, method)(*args, **kwargs)
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/util/__init__.py", line 1686, in wrapper
    return f(*args, **kwargs)
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint_stats/__init__.py", line 801, in on_event
    if "owner" not in payload:
TypeError: argument of type 'NoneType' is not iterable
2023-08-23 09:49:23,320 - octoprint.plugins.printhistory - INFO - fileData not found
2023-08-23 09:49:23,429 - octoprint.plugins.detailedprogress - INFO - Printing stopped. Detailed progress stopped.
2023-08-23 09:49:23,439 - octoprint.plugins.excluderegion - INFO - Printing stopped: event=PrintFailed
2023-08-23 09:49:23,460 - octoprint.plugin - ERROR - Error while calling plugin homeassistant
Traceback (most recent call last):
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugin/__init__.py", line 275, in call_plugin
    result = getattr(plugin, method)(*args, **kwargs)
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/util/__init__.py", line 1686, in wrapper
    return f(*args, **kwargs)
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint_homeassistant/__init__.py", line 1129, in on_event
    self.mqtt_publish(
TypeError: 'NoneType' object is not callable
2023-08-23 09:49:23,480 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:49:23,481 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:49:23,484 - octoprint.plugins.printhistory - INFO - Name: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:49:23,484 - octoprint.plugins.printhistory - INFO - Origin: local
2023-08-23 09:49:23,485 - octoprint.plugins.printhistory - INFO - Path: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:49:23,540 - octoprint.plugins.printhistory - INFO - Path_On_disk: /home/jonas/.octoprint/uploads/CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:49:23,563 - octoprint.plugins.tracking - INFO - Sent tracking event print_failed, payload: {'origin': 'local', 'file': 'd0998099b4ff8c4ea13c61013b0c3635573b9315', 'elapsed': 304, 'reason': 'error', 'commerror_text': 'Printer keeps requesting line 1029 again and again, communication stuck'}
2023-08-23 09:49:23,565 - octoprint.plugins.printhistory - INFO - Got metadata from name
2023-08-23 09:49:23,566 - octoprint.plugins.printhistory - INFO - found fileData
2023-08-23 09:49:23,598 - octoprint.plugins.printhistory - INFO - Can't parse additional parameters from /home/jonas/.octoprint/uploads/CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 20% ext1 200C bed 60C.gcode
2023-08-23 09:49:23,598 - octoprint.plugins.printhistory - INFO - {}
2023-08-23 09:49:23,637 - octoprint.plugins.octoeverywhere - INFO - NotificationsHandler successfully sent 'error'
2023-08-23 09:49:23,648 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:49:24,030 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:49:24,088 - octoprint.plugins.stats - INFO - Printer Stats - on_event
2023-08-23 09:49:24,244 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:49:24,245 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:49:24,304 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:49:24,305 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:49:24,377 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:49:24,378 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:49:25,993 - octoprint.plugins.octoeverywhere - INFO - NotificationsHandler successfully sent 'failed'
2023-08-23 09:50:03,980 - octoprint.plugins.camerasettings - INFO - Excluding camera bcm2835-isp-capture0 based on ^bcm2835-isp-\w+$
2023-08-23 09:50:03,982 - octoprint.plugins.camerasettings - INFO - Excluding camera bcm2835-isp-capture1 based on ^bcm2835-isp-\w+$
2023-08-23 09:50:03,985 - octoprint.plugins.camerasettings - INFO - Excluding camera bcm2835-codec-isp based on ^bcm2835-codec-\w+$
2023-08-23 09:50:03,987 - octoprint.plugins.camerasettings - INFO - Excluding camera bcm2835-isp-output0 based on ^bcm2835-isp-\w+$
2023-08-23 09:50:04,024 - octoprint.plugins.camerasettings - INFO - Excluding camera bcm2835-codec-decode based on ^bcm2835-codec-\w+$
2023-08-23 09:50:04,063 - octoprint.plugins.camerasettings - INFO - Excluding camera bcm2835-isp-capture1 based on ^bcm2835-isp-\w+$
2023-08-23 09:50:04,066 - octoprint.plugins.camerasettings - INFO - Excluding camera bcm2835-isp-stats2 based on ^bcm2835-isp-\w+$
2023-08-23 09:50:04,068 - octoprint.plugins.camerasettings - INFO - Excluding camera bcm2835-isp-output0 based on ^bcm2835-isp-\w+$
2023-08-23 09:50:04,070 - octoprint.plugins.camerasettings - INFO - Excluding camera bcm2835-codec-encode_image based on ^bcm2835-codec-\w+$
2023-08-23 09:50:04,073 - octoprint.plugins.camerasettings - INFO - Excluding camera bcm2835-isp-capture0 based on ^bcm2835-isp-\w+$
2023-08-23 09:50:04,075 - octoprint.plugins.camerasettings - INFO - Excluding camera bcm2835-codec-encode based on ^bcm2835-codec-\w+$
2023-08-23 09:50:04,113 - octoprint.plugins.camerasettings - INFO - Excluding camera bcm2835-codec-image_fx based on ^bcm2835-codec-\w+$
2023-08-23 09:50:04,116 - octoprint.plugins.camerasettings - INFO - Excluding camera bcm2835-isp-stats2 based on ^bcm2835-isp-\w+$
2023-08-23 09:50:15,047 - octoprint.server.api.system - INFO - Performing command for core:reboot: sudo shutdown -r now
2023-08-23 09:50:25,316 - octoprint.startup - INFO - ******************************************************************************
2023-08-23 09:50:25,318 - octoprint.startup - INFO - Starting OctoPrint 1.9.2
2023-08-23 09:50:25,324 - octoprint.startup - INFO - ******************************************************************************
2023-08-23 09:50:31,926 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: offline
2023-08-23 09:50:31,926 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 1.1.1.1:53 is not working
2023-08-23 09:50:31,926 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is not working
2023-08-23 09:50:31,933 - octoprint.startup - INFO - We don't appear to be online, not fetching plugin blacklist
2023-08-23 09:50:31,941 - octoprint.plugin.core - INFO - Loading plugins from /home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugins, /home/jonas/.octoprint/plugins and installed plugin packages...
2023-08-23 09:50:36,944 - octoprint.plugin.core - INFO - Plugin Obico for OctoPrint (2.4.4) is disabled.
2023-08-23 09:50:38,897 - octoprint.plugin.core - INFO - Found 47 plugin(s) providing 46 mixin implementations, 121 hook handlers
2023-08-23 09:50:39,114 - octoprint.server.heartbeat - INFO - Starting server heartbeat, 900.0s interval
2023-08-23 09:50:39,381 - octoprint.server - INFO - Intermediary server started
2023-08-23 09:50:39,404 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/jonas/.octoprint/uploads...
2023-08-23 09:50:39,447 - octoprint.filemanager.storage - INFO - ... file metadata for /home/jonas/.octoprint/uploads initialized successfully.
2023-08-23 09:50:39,452 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_SHOW (needs: "Need(method='role', value='plugin_action_command_notification_show')")
2023-08-23 09:50:39,452 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_CLEAR (needs: "Need(method='role', value='plugin_action_command_notification_clear')")
2023-08-23 09:50:39,453 - octoprint.server - INFO - Added new permission from plugin action_command_prompt: PLUGIN_ACTION_COMMAND_PROMPT_INTERACT (needs: "Need(method='role', value='plugin_action_command_prompt_interact')")
2023-08-23 09:50:39,453 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_READ (needs: "Need(method='role', value='plugin_announcements_read')")
2023-08-23 09:50:39,453 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_MANAGE (needs: "Need(method='role', value='plugin_announcements_manage'), Need(method='role', value='plugin_announcements_read')")
2023-08-23 09:50:39,454 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_ADMIN (needs: "Need(method='role', value='plugin_appkeys_admin')")
2023-08-23 09:50:39,454 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_GRANT (needs: "Need(method='role', value='plugin_appkeys_user')")
2023-08-23 09:50:39,454 - octoprint.server - INFO - Added new permission from plugin backup: PLUGIN_BACKUP_ACCESS (needs: "Need(method='role', value='plugin_backup_access')")
2023-08-23 09:50:39,455 - octoprint.server - INFO - Added new permission from plugin eeprom_marlin: PLUGIN_EEPROM_MARLIN_READ (needs: "Need(method='role', value='plugin_eeprom_marlin_read')")
2023-08-23 09:50:39,455 - octoprint.server - INFO - Added new permission from plugin eeprom_marlin: PLUGIN_EEPROM_MARLIN_EDIT (needs: "Need(method='role', value='plugin_eeprom_marlin_edit')")
2023-08-23 09:50:39,455 - octoprint.server - INFO - Added new permission from plugin eeprom_marlin: PLUGIN_EEPROM_MARLIN_RESET (needs: "Need(method='role', value='plugin_eeprom_marlin_reset')")
2023-08-23 09:50:39,456 - octoprint.server - INFO - Added new permission from plugin firmware_check: PLUGIN_FIRMWARE_CHECK_DISPLAY (needs: "Need(method='role', value='plugin_firmware_check_display')")
2023-08-23 09:50:39,456 - octoprint.server - INFO - Added new permission from plugin logging: PLUGIN_LOGGING_MANAGE (needs: "Need(method='role', value='plugin_logging_manage')")
2023-08-23 09:50:39,456 - octoprint.server - INFO - Added new permission from plugin octoapp: PLUGIN_OCTOAPP_RECEIVE_NOTIFICATIONS (needs: "Need(method='role', value='plugin_octoapp_admin')")
2023-08-23 09:50:39,457 - octoprint.server - INFO - Added new permission from plugin octoapp: PLUGIN_OCTOAPP_GET_DATA (needs: "Need(method='role', value='plugin_octoapp_admin')")
2023-08-23 09:50:39,457 - octoprint.server - INFO - Added new permission from plugin pi_support: PLUGIN_PI_SUPPORT_STATUS (needs: "Need(method='role', value='plugin_pi_support_check')")
2023-08-23 09:50:39,459 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_LIST (needs: "Need(method='role', value='plugin_pluginmanager_list')")
2023-08-23 09:50:39,461 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_MANAGE (needs: "Need(method='role', value='plugin_pluginmanager_manage')")
2023-08-23 09:50:39,466 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_INSTALL (needs: "Need(method='role', value='plugin_pluginmanager_install'), Need(method='role', value='plugin_pluginmanager_manage')")
2023-08-23 09:50:39,467 - octoprint.server - INFO - Added new permission from plugin prusaslicerthumbnails: PLUGIN_PRUSASLICERTHUMBNAILS_SCAN (needs: "Need(method='role', value='plugin_prusaslicerthumbnails_admin')")
2023-08-23 09:50:39,468 - octoprint.server - INFO - Added new permission from plugin psucontrol: PLUGIN_PSUCONTROL_CONTROL (needs: "Need(method='role', value='plugin_psucontrol_admin')")
2023-08-23 09:50:39,469 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CHECK (needs: "Need(method='role', value='plugin_softwareupdate_check')")
2023-08-23 09:50:39,470 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_UPDATE (needs: "Need(method='role', value='plugin_softwareupdate_update')")
2023-08-23 09:50:39,471 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CONFIGURE (needs: "Need(method='role', value='plugin_softwareupdate_configure')")
2023-08-23 09:50:39,488 - octoprint.printer.standard - INFO - Using print time estimator provided by PrintTimeGenius
2023-08-23 09:50:40,779 - octoprint.util.pip - INFO - Using "/home/jonas/oprint/bin/python -m pip" as command to invoke pip
2023-08-23 09:50:41,760 - octoprint.util.pip - INFO - Version of pip is 22.3
2023-08-23 09:50:41,766 - octoprint.util.pip - INFO - pip installs to /home/jonas/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes
2023-08-23 09:50:41,767 - octoprint.util.pip - INFO - ==> pip ok -> yes
2023-08-23 09:50:42,024 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk
2023-08-23 09:50:42,041 - octoprint.plugins.softwareupdate - INFO - Loaded update log from disk
2023-08-23 09:50:42,171 - octoprint.plugins.firmwareupdater - INFO - Python binproto2 package installed: False
2023-08-23 09:50:42,195 - octoprint.plugins.excluderegion - INFO - Logging mode set to 'octoprint'
2023-08-23 09:50:42,196 - octoprint.plugins.excluderegion - INFO - Setting update detected: g90InfluencesExtruder=False, clearRegionsAfterPrintFinishes=False, mayShrinkRegionsWhilePrinting=False, loggingMode=octoprint, enteringExcludedRegionGcode=None, exitingExcludedRegionGcode=None, extendedExcludeGcodes={'G4': {"gcode": "G4", "mode": "exclude", "description": "Ignore all dwell commands in an excluded area to reduce delays while excluding", "type": "ExcludedGcode"}, 'M117': {"gcode": "M117", "mode": "last", "description": "Suppress display messages while excluding and output the last message encountered when exiting the excluded area", "type": "ExcludedGcode"}, 'M204': {"gcode": "M204", "mode": "merge", "description": "Record default acceleration changes while excluding and apply the most recent values in a single command after exiting the excluded area", "type": "ExcludedGcode"}, 'M205': {"gcode": "M205", "mode": "merge", "description": "Record advanced setting changes while excluding and apply the most recent values in a single command after exiting the excluded area", "type": "ExcludedGcode"}, 'M73': {"gcode": "M73", "mode": "merge", "description": "Suppress progress updates while excluding and output the most recent progress values encountered when exiting the excluded area", "type": "ExcludedGcode"}}, atCommandActions={'ExcludeRegion': [{"command": "ExcludeRegion", "parameterPattern": "^\\s*(enable|on)(\\s|$)", "action": "enable_exclusion", "description": "Default action to enable exclusion", "type": "AtCommandAction"}, {"command": "ExcludeRegion", "parameterPattern": "^\\s*(disable|off)(\\s|$)", "action": "disable_exclusion", "description": "Default action to disable exclusion", "type": "AtCommandAction"}]}
2023-08-23 09:50:42,230 - octoprint.plugins.cancelobject - INFO - No beforegcode defined
2023-08-23 09:50:42,231 - octoprint.plugins.cancelobject - INFO - No aftergcode defined
2023-08-23 09:50:42,253 - octoprint.plugins.eeprom_marlin - INFO - EEPROM Data initialised
2023-08-23 09:50:42,259 - octoprint.plugins.eeprom_marlin - INFO - Backup metadata initialised
2023-08-23 09:50:42,259 - octoprint.plugins.eeprom_marlin - INFO - All EEPROM editor modules loaded
2023-08-23 09:50:42,293 - octoprint.plugin.core - INFO - Initialized 46 plugin implementation(s)
2023-08-23 09:50:42,413 - octoprint - INFO - Installing webcam compat overlay for configured default webcam <octoprint.webcams.ProvidedWebcam object at 0xaa4f3c28>
2023-08-23 09:50:42,415 - octoprint.plugin.core - INFO - 47 plugin(s) registered with the system:
|  ABL Expert Plugin (0.6) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_ABL_Expert
|  Action Command Notification Support (bundled) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_notification
|  Action Command Prompt Support (bundled) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_prompt
|  Announcement Plugin (bundled) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugins/announcements
|  Anonymous Usage Tracking (bundled) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugins/tracking
|  Application Keys Plugin (bundled) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugins/appkeys
|  Backup & Restore (bundled) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugins/backup
|  Bed Visualizer (1.1.1) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_bedlevelvisualizer
|  Camera Settings (0.4.3) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_CameraSettings
|  Cancel Objects (0.4.7) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_cancelobject
|  Classic Webcam (bundled) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugins/classicwebcam
|  Core Wizard (bundled) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugins/corewizard
|  Creality Temperature (1.2.4) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_CrealityTemperature
|  Detailed Progress (0.2.7) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_detailedprogress
|  Discovery (bundled) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugins/discovery
|  DisplayProgress (0.1.3) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_displayprogress
|  Error Tracking (bundled) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugins/errortracking
|  Event Manager (bundled) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugins/eventmanager
|  Exclude Region (0.3.2) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_excluderegion
|  File Check (2021.2.23) (bundled) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_file_check
|  Firmware Check (2021.10.11) (bundled) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_firmware_check
|  Firmware Updater (1.14.0) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_firmwareupdater
|  GCode Viewer (bundled) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugins/gcodeviewer
|  HomeAssistant Discovery (3.7.0) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_homeassistant
|  Logging (bundled) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugins/logging
|  M73 Progress Plugin (0.2.1) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_m73progress
|  Marlin EEPROM Editor (3.3.0) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_eeprom_marlin
|  Navbar Temperature Plugin (0.15) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_navbartemp
| !Obico for OctoPrint (2.4.4) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_obico
|  OctoApp (1.3.2) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_octoapp
|  OctoEverywhere! (2.7.6) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_octoeverywhere
|  Octolapse (0.4.3) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_octolapse
|  Octoprint Display ETA (2.2.0) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_display_eta
|  Pi Support Plugin (2023.7.31) (bundled) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_pi_support
|  Plugin Manager (bundled) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugins/pluginmanager
|  PrettyGCode (1.2.4) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_prettygcode
|  Print History Plugin (1.4.1) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_printhistory
|  Printer Stats (3.1.4) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_stats
|  PrintTimeGenius Plugin (2.3.1) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_PrintTimeGenius
|  PSU Control (1.0.6) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_psucontrol
|  PSU Control - Home Assistant (1.0.5) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_psucontrol_homeassistant
|  Slicer Thumbnails (1.0.2) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_prusaslicerthumbnails
|  Software Update (bundled) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugins/softwareupdate
|  Tab Order (0.5.12) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_taborder
|  Themeify (1.2.2) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_themeify
|  Virtual Printer (bundled) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugins/virtual_printer
|  Z Probe Offset (0.5) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_z_probe_offset
Prefix legend: ! = disabled, # = blacklisted, * = incompatible
2023-08-23 09:50:42,454 - octoprint.environment - INFO - Detected environment is Python 3.9.2 under Linux (linux). Details:
|  hardware:
|    cores: 4
|    freq: 1500.0
|    ram: 1908686848
|  os:
|    bits: 32
|    id: linux
|    platform: linux
|  plugins:
|    pi_support:
|      model: Raspberry Pi 4 Model B Rev 1.1
|      octopi_version: 1.0.0
|      octopiuptodate_build: 1.0.0-1.9.2-20230718111854
|      octopiuptodate_build_short: 2023.07.18.111854
|      throttle_check_enabled: true
|      throttle_check_functional: true
|      throttle_state: '0x0'
|  python:
|    pip: '22.3'
|    version: 3.9.2
|    virtualenv: /home/jonas/oprint
2023-08-23 09:50:42,481 - octoprint.server - INFO - Reset webasset folder /home/jonas/.octoprint/generated/webassets...
2023-08-23 09:50:42,482 - octoprint.server - INFO - Reset webasset folder /home/jonas/.octoprint/generated/.webassets-cache...
2023-08-23 09:50:42,483 - octoprint.server - INFO - Reset webasset folder /home/jonas/.octoprint/generated/.webassets-manifest.json...
2023-08-23 09:50:42,666 - octoprint.plugins.bedlevelvisualizer - WARNING - The Blueprint of this plugin is relying on the default implementation of is_blueprint_csrf_protected (newly added in OctoPrint 1.8.3), which in a future version will be switched from False to True for security reasons. Plugin authors should ensure they explicitly declare the CSRF protection status in their BlueprintPlugin mixin implementation. Recommendation is to enable CSRF protection and exempt views that must not use it with the octoprint.plugin.BlueprintPlugin.csrf_exempt decorator.
2023-08-23 09:50:42,666 - octoprint.server - WARNING - CSRF Protection for Blueprint of plugin bedlevelvisualizer is DISABLED
2023-08-23 09:50:42,674 - octoprint.plugins.octolapse - WARNING - The Blueprint of this plugin is relying on the default implementation of is_blueprint_csrf_protected (newly added in OctoPrint 1.8.3), which in a future version will be switched from False to True for security reasons. Plugin authors should ensure they explicitly declare the CSRF protection status in their BlueprintPlugin mixin implementation. Recommendation is to enable CSRF protection and exempt views that must not use it with the octoprint.plugin.BlueprintPlugin.csrf_exempt decorator.
2023-08-23 09:50:42,675 - octoprint.server - WARNING - CSRF Protection for Blueprint of plugin octolapse is DISABLED
2023-08-23 09:50:42,677 - octoprint.plugins.printhistory - WARNING - The Blueprint of this plugin is relying on the default implementation of is_blueprint_csrf_protected (newly added in OctoPrint 1.8.3), which in a future version will be switched from False to True for security reasons. Plugin authors should ensure they explicitly declare the CSRF protection status in their BlueprintPlugin mixin implementation. Recommendation is to enable CSRF protection and exempt views that must not use it with the octoprint.plugin.BlueprintPlugin.csrf_exempt decorator.
2023-08-23 09:50:42,678 - octoprint.server - WARNING - CSRF Protection for Blueprint of plugin printhistory is DISABLED
2023-08-23 09:50:43,113 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:50:43,131 - octoprint.plugins.firmwareupdater - INFO - Setting maximum upload size for /flash to 5243904
2023-08-23 09:50:43,131 - octoprint.server - INFO - Shutting down intermediary server...
2023-08-23 09:50:43,216 - octoprint.server - INFO - Intermediary server shut down
2023-08-23 09:50:43,219 - octoprint.events - INFO - Processing startup event, this is our first event
2023-08-23 09:50:43,219 - octoprint.events - INFO - Adding 1 events to queue that were held back before startup event
2023-08-23 09:50:43,221 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue...
2023-08-23 09:50:43,224 - octoprint.server - INFO - Autoconnect on startup is configured, trying to connect to the printer...
2023-08-23 09:50:43,232 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue
2023-08-23 09:50:43,261 - octoprint.server - INFO - Trying to connect to configured serial port None
2023-08-23 09:50:43,404 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection"
2023-08-23 09:50:43,412 - octoprint.server - INFO - Starting autorefresh of serial port list
2023-08-23 09:50:43,414 - octoprint.server - INFO - Autorefresh of serial port list stopped
2023-08-23 09:50:43,418 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder...
2023-08-23 09:50:43,421 - octoprint.server.util.watchdog - INFO - ... initial scan done.
2023-08-23 09:50:43,427 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 1 port/baudrate candidates: /dev/ttyUSB0@115200
2023-08-23 09:50:43,427 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200
2023-08-23 09:50:43,430 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200
2023-08-23 09:50:43,484 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s
2023-08-23 09:50:43,494 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2023-08-23 09:50:43,542 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:50:43,544 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:50:45,088 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance "S1 Plus"._http._tcp.local.' for _http._tcp.local.
2023-08-23 09:51:03,985 - octoprint.plugins.discovery - ERROR - Could not register OctoPrint instance "S1 Plus"._octoprint._tcp.local. for _octoprint._tcp.local. on port 80
Traceback (most recent call last):
  File "/home/jonas/oprint/lib/python3.9/site-packages/zeroconf/_utils/asyncio.py", line 82, in run_coro_with_timeout
    return asyncio.run_coroutine_threadsafe(aw, loop).result(
  File "/usr/lib/python3.9/concurrent/futures/_base.py", line 442, in result
    raise TimeoutError()
concurrent.futures._base.TimeoutError

The above exception was the direct cause of the following exception:

Traceback (most recent call last):
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugins/discovery/__init__.py", line 241, in zeroconf_register
    self._zeroconf.register_service(info, allow_name_change=True)
  File "/home/jonas/oprint/lib/python3.9/site-packages/zeroconf/_core.py", line 581, in register_service
    run_coro_with_timeout(
  File "/home/jonas/oprint/lib/python3.9/site-packages/zeroconf/_utils/asyncio.py", line 86, in run_coro_with_timeout
    raise EventLoopBlocked from ex
zeroconf._exceptions.EventLoopBlocked
2023-08-23 09:51:04,010 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance "S1 Plus" for SSDP
2023-08-23 09:51:04,107 - octoprint.plugins.octoeverywhere - INFO - OctoPrint host:127.0.0.1 port:5000
2023-08-23 09:51:04,115 - octoprint.plugins.octoeverywhere - INFO - OctoPingPong stats loaded from file.
2023-08-23 09:51:04,117 - octoprint.plugins.octoeverywhere - INFO - mDns Cache file loaded. Cached Entries Found: 0
2023-08-23 09:51:04,120 - octoprint.plugins.psucontrol - INFO - Registered plugin - psucontrol_homeassistant
2023-08-23 09:51:04,122 - octoprint.server - INFO - Listening on http://127.0.0.1:5000
2023-08-23 09:51:04,188 - octoprint.plugins.octoeverywhere - INFO - IPV4 - starport:142.93.161.88 main:104.21.70.123
2023-08-23 09:51:04,216 - octoprint.plugins.octoeverywhere - INFO - Failed to resolve host ipv6 name [Errno -2] Name or service not known
2023-08-23 09:51:04,244 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid
2023-08-23 09:51:04,260 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s
2023-08-23 09:51:04,263 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2023-08-23 09:51:04,383 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity changed from offline to online
2023-08-23 09:51:04,559 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json
2023-08-23 09:51:04,651 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid
2023-08-23 09:51:04,715 - octoprint.plugins.announcements - INFO - Loaded channel _important from https://octoprint.org/feeds/important.xml in 0.33s
2023-08-23 09:51:05,140 - octoprint.plugins.announcements - INFO - Loaded channel _important from https://octoprint.org/feeds/important.xml in 0.59s
2023-08-23 09:51:05,369 - octoprint.util.pip - INFO - Using "/home/jonas/oprint/bin/python -m pip" as command to invoke pip
2023-08-23 09:51:05,405 - octoprint.util.pip - INFO - pip installs to /home/jonas/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes
2023-08-23 09:51:05,405 - octoprint.util.pip - INFO - ==> pip ok -> yes
2023-08-23 09:51:05,439 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 3.2GB. That is considered sufficient for updating.
2023-08-23 09:51:05,971 - octoprint.plugins.announcements - INFO - Loaded channel _releases from https://octoprint.org/feeds/releases.xml in 0.29s
2023-08-23 09:51:06,002 - octoprint.plugins.announcements - INFO - Loaded channel _releases from https://octoprint.org/feeds/releases.xml in 0.5s
2023-08-23 09:51:06,288 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s
2023-08-23 09:51:06,480 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2023-08-23 09:51:06,646 - octoprint.plugins.bedlevelvisualizer - INFO - OctoPrint-BedLevelVisualizer loaded!
2023-08-23 09:51:06,648 - octoprint.plugins.detailedprogress - INFO - OctoPrint-DetailedProgress loaded!
2023-08-23 09:51:06,662 - octoprint.plugins.homeassistant - INFO - PSUControl helpers found
2023-08-23 09:51:06,728 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 09:51:06,894 - octoprint.plugin - ERROR - Error while calling plugin homeassistant
Traceback (most recent call last):
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugin/__init__.py", line 275, in call_plugin
    result = getattr(plugin, method)(*args, **kwargs)
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/util/__init__.py", line 1686, in wrapper
    return f(*args, **kwargs)
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint_homeassistant/__init__.py", line 179, in on_after_startup
    self._generate_device_registration()
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint_homeassistant/__init__.py", line 262, in _generate_device_registration
    self._generate_sensor(
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint_homeassistant/__init__.py", line 610, in _generate_sensor
    self.mqtt_publish(topic, payload, allow_queueing=True)
TypeError: 'NoneType' object is not callable
2023-08-23 09:51:06,973 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 13, 'printer_state': 'DETECT_SERIAL'}
2023-08-23 09:51:07,357 - octoprint.plugins.tracking - INFO - Sent tracking event pong, payload: {'version': '1.9.2', 'os': 'linux', 'bits': 32, 'python': '3.9.2', 'pip': '22.3', 'cores': 4, 'freq': 1500.0, 'ram': 1908686848, 'pi_model': 'Raspberry Pi 4 Model B Rev 1.1', 'octopi_version': '1.0.0', 'octopiuptodate_build': '1.0.0-1.9.2-20230718111854', 'plugins': 'z_probe_offset:0.5,themeify:1.2.2,prusaslicerthumbnails:1.0.2,taborder:0.5.12,stats:3.1.4,psucontrol:1.0.6,psucontrol_homeassistant:1.0.5,printtimegenius:2.3.1,printhistory:1.4.1,prettygcode:1.2.4,navbartemp:0.15,homeassistant:3.7.0,firmwareupdater:1.14.0,excluderegion:0.3.2,displayprogress:0.1.3,display_eta:2.2.0,detailedprogress:0.2.7,crealitytemperature:1.2.4,cancelobject:0.4.7,camerasettings:0.4.3,octolapse:0.4.3,octoeverywhere:2.7.6,octoapp:1.3.2,eeprom_marlin:3.3.0,m73progress:0.2.1,bedlevelvisualizer:1.1.1,abl_expert:0.6'}
2023-08-23 09:51:07,697 - octoprint.plugins.announcements - INFO - Loaded channel _blog from https://octoprint.org/feeds/octoblog.xml in 0.37s
2023-08-23 09:51:08,022 - octoprint.plugins.announcements - INFO - Loaded channel _blog from https://octoprint.org/feeds/octoblog.xml in 0.37s
2023-08-23 09:51:08,045 - octoprint.plugins.tracking - INFO - Sent tracking event startup, payload: {'version': '1.9.2', 'os': 'linux', 'bits': 32, 'python': '3.9.2', 'pip': '22.3', 'cores': 4, 'freq': 1500.0, 'ram': 1908686848, 'pi_model': 'Raspberry Pi 4 Model B Rev 1.1', 'octopi_version': '1.0.0', 'octopiuptodate_build': '1.0.0-1.9.2-20230718111854'}
2023-08-23 09:51:08,268 - octoprint.plugins.octoeverywhere - INFO - After startup called. Starting worker thread.
2023-08-23 09:51:08,314 - octoprint.plugins.octoeverywhere - INFO - Main thread starting
2023-08-23 09:51:08,411 - octoprint.plugins.prettygcode - INFO - Pretty GCode.
2023-08-23 09:51:08,412 - octoprint.plugins.octoeverywhere - INFO - Frontend http port detected as 80, is https? False
2023-08-23 09:51:08,467 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Error"
2023-08-23 09:51:08,469 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid
2023-08-23 09:51:08,491 - octoprint.plugins.octoeverywhere - INFO - Attempting to use lowest latency server: wss://fra.octoeverywhere.com/octoclientws
2023-08-23 09:51:08,562 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error"
2023-08-23 09:51:08,563 - octoprint.plugins.octoeverywhere - INFO - Attempting to talk to OctoEverywhere, server con wss://fra.octoeverywhere.com/octoclientws[1] wsId:2735964824
2023-08-23 09:51:08,644 - octoprint.plugins.stats - INFO - Printer Stats
2023-08-23 09:51:08,696 - octoprint.plugins.excluderegion - INFO - Printing stopped: event=Error
2023-08-23 09:51:08,708 - octoprint.plugins.octoeverywhere - INFO - NotificationsHandler didn't send the error event because we don't have the proper id and key yet.
2023-08-23 09:51:08,714 - octoprint.plugins.themeify - INFO - Themeify initialized.
2023-08-23 09:51:08,732 - octoprint.plugins.stats - INFO - Printer Stats - on_event
2023-08-23 09:51:08,745 - octoprint.plugins.announcements - INFO - Loaded channel _plugins from https://plugins.octoprint.org/feed.xml in 0.39s
2023-08-23 09:51:08,975 - octoprint.plugins.announcements - INFO - Loaded channel _plugins from https://plugins.octoprint.org/feed.xml in 0.48s
2023-08-23 09:51:09,098 - octoprint.plugins.octoeverywhere - INFO - Connected To OctoEverywhere, server con wss://fra.octoeverywhere.com/octoclientws[1]. Starting handshake...
2023-08-23 09:51:09,102 - octoprint.plugins.tracking - INFO - Sent tracking event commerror_autodetect, payload: {'commerror_text': 'No more candidates to test, and no working port/baudrate combination detected.'}
2023-08-23 09:51:09,153 - octoprint.server - INFO - Starting autorefresh of serial port list
2023-08-23 09:51:09,159 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid
2023-08-23 09:51:09,168 - octoprint.plugins.action_command_notification - INFO - Notifications cleared
2023-08-23 09:51:09,170 - octoprint.plugins.stats - INFO - Printer Stats - on_event
2023-08-23 09:51:09,170 - octoprint.plugin - ERROR - Error while calling plugin stats
Traceback (most recent call last):
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugin/__init__.py", line 275, in call_plugin
    result = getattr(plugin, method)(*args, **kwargs)
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/util/__init__.py", line 1686, in wrapper
    return f(*args, **kwargs)
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint_stats/__init__.py", line 801, in on_event
    if "owner" not in payload:
TypeError: argument of type 'NoneType' is not iterable
2023-08-23 09:51:09,218 - octoprint.server - INFO - Serial port list was updated, refreshing the port list in the frontend
2023-08-23 09:51:09,794 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'http://192.168.178.179/', 'path': '/', 'query_string': 'l10n=en'}
2023-08-23 09:51:09,873 - octoprint.plugins.announcements - INFO - Loaded channel _octopi from https://octoprint.org/feeds/octopi.xml in 0.17s
2023-08-23 09:51:09,997 - octoprint.plugins.announcements - INFO - Loaded channel _octopi from https://octoprint.org/feeds/octopi.xml in 0.24s
2023-08-23 09:51:10,728 - octoprint.plugins.octoeverywhere - INFO - Handshake complete, server con wss://fra.octoeverywhere.com/octoclientws[1], successfully connected to OctoEverywhere!
2023-08-23 09:51:12,020 - octoprint.server.util.flask - INFO - Passively logging in user jonas from ::ffff:192.168.178.21
2023-08-23 09:51:12,020 - octoprint.access.users - INFO - Logged in user: jonas
2023-08-23 09:51:19,404 - octoprint.server.views - ERROR - Error while retrieving template data for plugin homeassistant, ignoring it
Traceback (most recent call last):
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/server/views.py", line 1271, in fetch_template_data
    wizard_required = implementation.is_wizard_required()
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/util/__init__.py", line 1686, in wrapper
    return f(*args, **kwargs)
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint_homeassistant/__init__.py", line 1197, in is_wizard_required
    _retain = settings().get_boolean(
AttributeError: 'Settings' object has no attribute 'get_boolean'
2023-08-23 09:51:19,412 - octoprint.server.views - ERROR - Error while retrieving template data for plugin homeassistant, ignoring it
Traceback (most recent call last):
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/server/views.py", line 1271, in fetch_template_data
    wizard_required = implementation.is_wizard_required()
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/util/__init__.py", line 1686, in wrapper
    return f(*args, **kwargs)
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint_homeassistant/__init__.py", line 1197, in is_wizard_required
    _retain = settings().get_boolean(
AttributeError: 'Settings' object has no attribute 'get_boolean'
2023-08-23 09:51:20,806 - octoprint.server.util.flask - INFO - Passively logging in user jonas from 127.0.0.1
2023-08-23 09:51:20,807 - octoprint.access.users - INFO - Logged in user: jonas
2023-08-23 09:51:33,302 - octoprint.util.jinja - WARNING - Loading plugin template '/webcams/mjpg_streamer/logitech_c920.jinja2' from '/home/jonas/oprint/lib/python3.9/site-packages/octoprint_octolapse/templates/webcams/mjpg_streamer/logitech_c920.jinja2' without plugin prefix, this is deprecated and will soon no longer be supported.
2023-08-23 09:51:33,308 - octoprint.util.jinja - WARNING - Loading plugin template '/webcams/mjpg_streamer/logitech_c920.jinja2' from '/home/jonas/oprint/lib/python3.9/site-packages/octoprint_octolapse/templates/webcams/mjpg_streamer/logitech_c920.jinja2' without plugin prefix, this is deprecated and will soon no longer be supported.
2023-08-23 09:51:33,327 - octoprint.util.jinja - WARNING - Loading plugin template '/webcams/mjpg_streamer/raspi_cam_v2.jinja2' from '/home/jonas/oprint/lib/python3.9/site-packages/octoprint_octolapse/templates/webcams/mjpg_streamer/raspi_cam_v2.jinja2' without plugin prefix, this is deprecated and will soon no longer be supported.
2023-08-23 09:51:33,336 - octoprint.util.jinja - WARNING - Loading plugin template '/webcams/mjpg_streamer/raspi_cam_v2.jinja2' from '/home/jonas/oprint/lib/python3.9/site-packages/octoprint_octolapse/templates/webcams/mjpg_streamer/raspi_cam_v2.jinja2' without plugin prefix, this is deprecated and will soon no longer be supported.
2023-08-23 09:51:33,360 - octoprint.util.jinja - WARNING - Loading plugin template '/webcams/mjpg_streamer/logitech_c250.jinja2' from '/home/jonas/oprint/lib/python3.9/site-packages/octoprint_octolapse/templates/webcams/mjpg_streamer/logitech_c250.jinja2' without plugin prefix, this is deprecated and will soon no longer be supported.
2023-08-23 09:51:33,365 - octoprint.util.jinja - WARNING - Loading plugin template '/webcams/mjpg_streamer/logitech_c250.jinja2' from '/home/jonas/oprint/lib/python3.9/site-packages/octoprint_octolapse/templates/webcams/mjpg_streamer/logitech_c250.jinja2' without plugin prefix, this is deprecated and will soon no longer be supported.
2023-08-23 09:51:40,186 - octoprint.server.preemptive_cache - INFO - ... done in 30.39s
2023-08-23 09:51:40,186 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'https://127.0.0.1:5000/', 'path': '/', 'query_string': 'l10n=en'}
2023-08-23 09:51:40,248 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.178.21
2023-08-23 09:51:41,050 - octoprint.server.util.flask - INFO - Passively logging in user jonas from ::ffff:192.168.178.21
2023-08-23 09:51:41,056 - octoprint.access.users - INFO - Logged in user: jonas
2023-08-23 09:51:41,465 - octoprint.server.util.sockjs - INFO - User jonas logged in on the socket from client ::ffff:192.168.178.21
2023-08-23 09:51:47,426 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Opening serial connection"
2023-08-23 09:51:47,434 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200
2023-08-23 09:51:47,473 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial connection" to "Connecting"
2023-08-23 09:51:47,662 - octoprint.server.views - ERROR - Error while retrieving template data for plugin homeassistant, ignoring it
Traceback (most recent call last):
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/server/views.py", line 1271, in fetch_template_data
    wizard_required = implementation.is_wizard_required()
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/util/__init__.py", line 1686, in wrapper
    return f(*args, **kwargs)
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint_homeassistant/__init__.py", line 1197, in is_wizard_required
    _retain = settings().get_boolean(
AttributeError: 'Settings' object has no attribute 'get_boolean'
2023-08-23 09:51:47,698 - octoprint.server - INFO - Autorefresh of serial port list stopped
2023-08-23 09:51:51,772 - octoprint.plugins.octoeverywhere - INFO - Slipstream took 43.39470291137695 to fully update the cache
2023-08-23 09:51:53,028 - octoprint.server.preemptive_cache - INFO - ... done in 12.84s
2023-08-23 09:51:53,028 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'https://s1plus.octoeverywhere.com/', 'path': '/', 'query_string': 'l10n=en'}
2023-08-23 09:51:54,111 - octoprint.server.views - ERROR - Error while retrieving template data for plugin homeassistant, ignoring it
Traceback (most recent call last):
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/server/views.py", line 1271, in fetch_template_data
    wizard_required = implementation.is_wizard_required()
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/util/__init__.py", line 1686, in wrapper
    return f(*args, **kwargs)
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint_homeassistant/__init__.py", line 1197, in is_wizard_required
    _retain = settings().get_boolean(
AttributeError: 'Settings' object has no attribute 'get_boolean'
2023-08-23 09:51:56,162 - octoprint.server.preemptive_cache - INFO - ... done in 3.13s
2023-08-23 09:52:17,514 - octoprint.util.comm - INFO - Changing monitoring state from "Connecting" to "Offline"
2023-08-23 09:52:17,528 - octoprint.server - INFO - Starting autorefresh of serial port list
2023-08-23 09:52:17,532 - octoprint.plugins.action_command_notification - INFO - Notifications cleared
2023-08-23 09:52:17,540 - octoprint.plugins.stats - INFO - Printer Stats - on_event
2023-08-23 09:52:17,540 - octoprint.plugin - ERROR - Error while calling plugin stats
Traceback (most recent call last):
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugin/__init__.py", line 275, in call_plugin
    result = getattr(plugin, method)(*args, **kwargs)
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/util/__init__.py", line 1686, in wrapper
    return f(*args, **kwargs)
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint_stats/__init__.py", line 801, in on_event
    if "owner" not in payload:
TypeError: argument of type 'NoneType' is not iterable
2023-08-23 10:00:42,507 - octoprint.server - INFO - Serial port list was updated, refreshing the port list in the frontend
2023-08-23 10:01:07,791 - octoprint.server - INFO - Serial port list was updated, refreshing the port list in the frontend
2023-08-23 10:03:19,507 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection"
2023-08-23 10:03:19,519 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 1 port/baudrate candidates: /dev/ttyUSB0@115200
2023-08-23 10:03:19,519 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200
2023-08-23 10:03:19,524 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200
2023-08-23 10:03:19,624 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s
2023-08-23 10:03:19,642 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2023-08-23 10:03:19,730 - octoprint.server - INFO - Autorefresh of serial port list stopped
2023-08-23 10:03:20,135 - octoprint.util.comm - INFO - Printer seems to support the busy protocol, will adjust timeouts and set busy interval accordingly
2023-08-23 10:05:02,117 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s
2023-08-23 10:05:02,126 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2023-08-23 10:05:06,124 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s
2023-08-23 10:05:06,128 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2023-08-23 10:05:14,140 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Error"
2023-08-23 10:05:14,155 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error"
2023-08-23 10:05:14,186 - octoprint.plugins.excluderegion - INFO - Printing stopped: event=Error
2023-08-23 10:05:14,188 - octoprint.plugins.stats - INFO - Printer Stats - on_event
2023-08-23 10:05:14,220 - octoprint.server - INFO - Starting autorefresh of serial port list
2023-08-23 10:05:14,224 - octoprint.plugins.action_command_notification - INFO - Notifications cleared
2023-08-23 10:05:14,237 - octoprint.plugins.stats - INFO - Printer Stats - on_event
2023-08-23 10:05:14,237 - octoprint.plugin - ERROR - Error while calling plugin stats
Traceback (most recent call last):
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugin/__init__.py", line 275, in call_plugin
    result = getattr(plugin, method)(*args, **kwargs)
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/util/__init__.py", line 1686, in wrapper
    return f(*args, **kwargs)
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint_stats/__init__.py", line 801, in on_event
    if "owner" not in payload:
TypeError: argument of type 'NoneType' is not iterable
2023-08-23 10:05:14,329 - octoprint.plugins.tracking - INFO - Sent tracking event commerror_autodetect, payload: {'commerror_text': 'No more candidates to test, and no working port/baudrate combination detected.'}
2023-08-23 10:05:22,318 - octoprint.server - INFO - Serial port list was updated, refreshing the port list in the frontend
2023-08-23 10:05:28,366 - octoprint.server - INFO - Serial port list was updated, refreshing the port list in the frontend
2023-08-23 10:05:39,115 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2023-08-23 10:05:40,803 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection"
2023-08-23 10:05:40,825 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 1 port/baudrate candidates: /dev/ttyUSB0@115200
2023-08-23 10:05:40,825 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200
2023-08-23 10:05:40,829 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200
2023-08-23 10:05:40,876 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s
2023-08-23 10:05:40,883 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2023-08-23 10:05:41,512 - octoprint.server - INFO - Autorefresh of serial port list stopped
2023-08-23 10:05:42,203 - octoprint.util.comm - INFO - Printer seems to support the busy protocol, will adjust timeouts and set busy interval accordingly
2023-08-23 10:06:06,754 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 913, 'printer_state': 'DETECT_SERIAL'}
2023-08-23 10:06:12,409 - octoprint.access.users - INFO - Cleaning up user session D96B1203D3674695A7E5A5F4A4B8E6DE for user jonas
2023-08-23 10:06:12,410 - octoprint.access.users - INFO - Logged out user: jonas
2023-08-23 10:06:16,263 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s
2023-08-23 10:06:16,268 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2023-08-23 10:06:20,271 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s
2023-08-23 10:06:20,273 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2023-08-23 10:06:21,579 - octoprint.access.users - INFO - Cleaning up user session 33ECFB4A223A4AACB6840B4FC9DEEAD9 for user jonas
2023-08-23 10:06:21,580 - octoprint.access.users - INFO - Logged out user: jonas
2023-08-23 10:06:24,279 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Error"
2023-08-23 10:06:24,311 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error"
2023-08-23 10:06:24,370 - octoprint.plugins.excluderegion - INFO - Printing stopped: event=Error
2023-08-23 10:06:24,374 - octoprint.plugins.stats - INFO - Printer Stats - on_event
2023-08-23 10:06:24,428 - octoprint.server - INFO - Starting autorefresh of serial port list
2023-08-23 10:06:24,444 - octoprint.plugins.action_command_notification - INFO - Notifications cleared
2023-08-23 10:06:24,450 - octoprint.plugins.stats - INFO - Printer Stats - on_event
2023-08-23 10:06:24,451 - octoprint.plugin - ERROR - Error while calling plugin stats
Traceback (most recent call last):
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugin/__init__.py", line 275, in call_plugin
    result = getattr(plugin, method)(*args, **kwargs)
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/util/__init__.py", line 1686, in wrapper
    return f(*args, **kwargs)
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint_stats/__init__.py", line 801, in on_event
    if "owner" not in payload:
TypeError: argument of type 'NoneType' is not iterable
2023-08-23 10:06:24,539 - octoprint.plugins.tracking - INFO - Sent tracking event commerror_autodetect, payload: {'commerror_text': 'No more candidates to test, and no working port/baudrate combination detected.'}
2023-08-23 10:20:39,116 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2023-08-23 10:21:06,845 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 1813, 'printer_state': 'OFFLINE'}
2023-08-23 10:22:03,967 - octoprint.server - INFO - Serial port list was updated, refreshing the port list in the frontend
2023-08-23 10:22:04,998 - octoprint.server - INFO - Serial port list was updated, refreshing the port list in the frontend
2023-08-23 10:22:16,084 - octoprint.server - INFO - Serial port list was updated, refreshing the port list in the frontend
2023-08-23 10:33:11,663 - octoprint.server - INFO - Serial port list was updated, refreshing the port list in the frontend
2023-08-23 10:35:19,752 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection"
2023-08-23 10:35:19,765 - octoprint.server - INFO - Autorefresh of serial port list stopped
2023-08-23 10:35:19,781 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 1 port/baudrate candidates: /dev/ttyUSB0@115200
2023-08-23 10:35:19,782 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200
2023-08-23 10:35:19,784 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200
2023-08-23 10:35:19,851 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s
2023-08-23 10:35:19,856 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2023-08-23 10:35:19,871 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Operational"
2023-08-23 10:35:19,876 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2023-08-23 10:35:19,923 - octoprint.plugins.firmwareupdater - INFO - Got CONNECTED event
2023-08-23 10:35:19,926 - octoprint.plugins.firmwareupdater - INFO - Run postflash flag is not set
2023-08-23 10:35:19,927 - octoprint.plugins.stats - INFO - Printer Stats - on_event
2023-08-23 10:35:19,948 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin abl10x10-v006-byTT (Aug 15 2023 13:10:26)"
2023-08-23 10:35:19,991 - octoprint.plugins.firmwareupdater - INFO - Setting BINARY_FILE_TRANSFER capability to False
2023-08-23 10:35:20,018 - octoprint.plugins.ABL_Expert - INFO - self.printer_cap[eeprom] is now 1

2023-08-23 10:35:20,031 - octoprint.plugins.z_probe_offset - INFO - Printer_cap[eeprom]:1
2023-08-23 10:35:20,068 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting
2023-08-23 10:35:20,107 - octoprint.plugins.ABL_Expert - INFO - self.printer_cap[autolevel] is now 1

2023-08-23 10:35:20,121 - octoprint.plugins.ABL_Expert - INFO - self.printer_cap[z_probe] is now 1

2023-08-23 10:35:20,123 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {'firmware_name': 'Marlin abl10x10-v006-byTT (Aug 15 2023 13:10:26)', 'printer_port': 'AUTO', 'printer_baudrate': 115200}
2023-08-23 10:35:20,141 - octoprint.plugins.z_probe_offset - INFO - Printer_cap[z_probe]:1
2023-08-23 10:35:20,151 - octoprint.plugins.ABL_Expert - INFO - self.printer_cap[leveling_data] is now 1

2023-08-23 10:35:20,209 - octoprint.util.comm - INFO - Firmware states that it supports emergency GCODEs to be sent without waiting for an acknowledgement first
2023-08-23 10:35:20,297 - octoprint.util.comm - INFO - Firmware states that it supports long filenames
2023-08-23 10:35:20,492 - octoprint.plugins.eeprom_marlin - INFO - M503 detected, collecting data
2023-08-23 10:35:20,598 - octoprint.plugins.eeprom_marlin - WARNING - EEPROM output line not recognized, skipped
2023-08-23 10:35:20,599 - octoprint.plugins.eeprom_marlin - WARNING - Line: echo:  M149 C ; Units in Celsius
2023-08-23 10:35:20,975 - octoprint.plugins.eeprom_marlin - WARNING - EEPROM output line not recognized, skipped
2023-08-23 10:35:20,975 - octoprint.plugins.eeprom_marlin - WARNING - Line: echo:  M221 S100
2023-08-23 10:35:21,594 - octoprint.plugins.eeprom_marlin - WARNING - EEPROM output line not recognized, skipped
2023-08-23 10:35:21,594 - octoprint.plugins.eeprom_marlin - WARNING - Line: echo:  M413 S1 ; ON
2023-08-23 10:35:21,609 - octoprint.plugins.z_probe_offset - INFO - Z probe offset is now -3.05
2023-08-23 10:35:21,680 - octoprint.plugins.eeprom_marlin - INFO - Finished data collection, updating UI
2023-08-23 10:35:21,704 - octoprint.plugins.z_probe_offset - INFO - Z probe offset is now -3.05
2023-08-23 10:35:21,756 - octoprint.plugins.ABL_Expert - INFO - Grid mesh size is 10
2023-08-23 10:35:21,864 - octoprint.plugins.z_probe_offset - INFO - Z probe offset is now -3.05
2023-08-23 10:35:39,117 - octoprint.server.heartbeat - INFO - Server heartbeat <3
2023-08-23 10:36:06,762 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 2713, 'printer_state': 'OPERATIONAL'}
2023-08-23 10:36:39,268 - octoprint.filemanager.analysis - INFO - Starting analysis of local:CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 10.0% ext1 200C bed 60C.gcode
2023-08-23 10:36:39,338 - octoprint.plugins.stats - INFO - Printer Stats - on_event
2023-08-23 10:36:43,073 - octoprint.filemanager.analysis - INFO - Analysis of entry local:CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 10.0% ext1 200C bed 60C.gcode finished, needed 3.80s
2023-08-23 10:36:43,923 - octoprint.printer.standard.job - INFO - Print job selected - origin: local, path: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 10.0% ext1 200C bed 60C.gcode, owner: jonas, user: jonas
2023-08-23 10:36:43,956 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting"
2023-08-23 10:36:43,960 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 10.0% ext1 200C bed 60C.gcode, owner: jonas, user: jonas
2023-08-23 10:36:44,048 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:36:44,050 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:36:44,528 - octoprint.plugins.excluderegion - INFO - File selected, resetting internal state
2023-08-23 10:36:44,602 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid
2023-08-23 10:36:44,960 - octoprint.plugins.tracking - INFO - Sent tracking event print_started, payload: {'origin': 'local', 'file': '6053e8993425920cd500f710e7f6534e24d2494a'}
2023-08-23 10:36:46,012 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid
2023-08-23 10:36:46,313 - octoprint.plugins.detailedprogress - INFO - Printing started. Detailed progress started.
2023-08-23 10:36:46,332 - octoprint.plugins.excluderegion - INFO - Printing started
2023-08-23 10:36:46,334 - octoprint.plugin - ERROR - Error while calling plugin homeassistant
Traceback (most recent call last):
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugin/__init__.py", line 275, in call_plugin
    result = getattr(plugin, method)(*args, **kwargs)
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/util/__init__.py", line 1686, in wrapper
    return f(*args, **kwargs)
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint_homeassistant/__init__.py", line 1115, in on_event
    self.mqtt_publish(
TypeError: 'NoneType' object is not callable
2023-08-23 10:36:46,350 - octoprint.plugins.octoeverywhere - INFO - Gadget is now watching!
2023-08-23 10:36:46,356 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:36:46,360 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:36:46,381 - octoprint.plugins.octoeverywhere - INFO - New print started; PrintId: HkptDKoqi83SYkSZIxqf5kZ2LeYmNDIg9W4AjwX774KkE31eCIYTDOYqZc0H file:CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 10.0% ext1 200C bed 60C.gcode size:3997.09765625 filament:11568
2023-08-23 10:36:46,381 - octoprint.plugins.stats - INFO - Printer Stats - on_event
2023-08-23 10:36:53,864 - octoprint.util.comm - INFO - Cancelling job on behalf of plugin octolapse
2023-08-23 10:36:53,867 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Cancelling"
2023-08-23 10:36:53,869 - octoprint.util.comm - INFO - Force-sending M108 to the printer
2023-08-23 10:36:53,873 - octoprint.plugins.excluderegion - INFO - Printing stopped: event=PrintCancelling
2023-08-23 10:36:53,878 - octoprint.util.comm - INFO - Changing monitoring state from "Cancelling" to "Printing"
2023-08-23 10:36:53,897 - octoprint.printer.standard.job - INFO - Print job cancelled - origin: local, path: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 10.0% ext1 200C bed 60C.gcode, owner: jonas, user: None
2023-08-23 10:36:53,967 - octoprint.plugins.detailedprogress - INFO - Printing stopped. Detailed progress stopped.
2023-08-23 10:36:53,977 - octoprint.plugins.excluderegion - INFO - Printing stopped: event=PrintCancelled
2023-08-23 10:36:53,980 - octoprint.plugin - ERROR - Error while calling plugin homeassistant
Traceback (most recent call last):
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugin/__init__.py", line 275, in call_plugin
    result = getattr(plugin, method)(*args, **kwargs)
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/util/__init__.py", line 1686, in wrapper
    return f(*args, **kwargs)
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint_homeassistant/__init__.py", line 1129, in on_event
    self.mqtt_publish(
TypeError: 'NoneType' object is not callable
2023-08-23 10:36:53,999 - octoprint.plugins.stats - INFO - Printer Stats - on_event
2023-08-23 10:36:54,137 - octoprint.plugins.tracking - INFO - Sent tracking event print_cancelled, payload: {'origin': 'local', 'file': '6053e8993425920cd500f710e7f6534e24d2494a', 'elapsed': 9}
2023-08-23 10:36:54,146 - octoprint.plugins.printhistory - INFO - fileData not found
2023-08-23 10:36:54,273 - octoprint.plugins.detailedprogress - INFO - Printing stopped. Detailed progress stopped.
2023-08-23 10:36:54,287 - octoprint.plugins.excluderegion - INFO - Printing stopped: event=PrintFailed
2023-08-23 10:36:54,314 - octoprint.plugin - ERROR - Error while calling plugin homeassistant
Traceback (most recent call last):
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugin/__init__.py", line 275, in call_plugin
    result = getattr(plugin, method)(*args, **kwargs)
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/util/__init__.py", line 1686, in wrapper
    return f(*args, **kwargs)
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint_homeassistant/__init__.py", line 1129, in on_event
    self.mqtt_publish(
TypeError: 'NoneType' object is not callable
2023-08-23 10:36:54,325 - octoprint.plugins.octoeverywhere - INFO - Gadget has stopped watching!
2023-08-23 10:36:54,326 - octoprint.plugins.octoeverywhere - INFO - RepeatTimer thread exit
2023-08-23 10:36:54,326 - octoprint.plugins.octoeverywhere - INFO - RepeatTimer thread exit
2023-08-23 10:36:54,326 - octoprint.plugins.octoeverywhere - INFO - RepeatTimer thread exit
2023-08-23 10:36:54,328 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:36:54,334 - octoprint.plugins.printhistory - INFO - Name: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 10.0% ext1 200C bed 60C.gcode
2023-08-23 10:36:54,364 - octoprint.plugins.printhistory - INFO - Origin: local
2023-08-23 10:36:54,359 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:36:54,371 - octoprint.plugins.printhistory - INFO - Path: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 10.0% ext1 200C bed 60C.gcode
2023-08-23 10:36:54,406 - octoprint.plugins.printhistory - INFO - Path_On_disk: /home/jonas/.octoprint/uploads/CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 10.0% ext1 200C bed 60C.gcode
2023-08-23 10:36:54,436 - octoprint.plugins.printhistory - INFO - Got metadata from name
2023-08-23 10:36:54,440 - octoprint.plugins.printhistory - INFO - found fileData
2023-08-23 10:36:54,462 - octoprint.plugins.tracking - INFO - Sent tracking event print_failed, payload: {'origin': 'local', 'file': '6053e8993425920cd500f710e7f6534e24d2494a', 'elapsed': 9, 'reason': 'cancelled'}
2023-08-23 10:36:54,481 - octoprint.plugins.printhistory - INFO - Can't parse additional parameters from /home/jonas/.octoprint/uploads/CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 10.0% ext1 200C bed 60C.gcode
2023-08-23 10:36:54,481 - octoprint.plugins.printhistory - INFO - {}
2023-08-23 10:36:54,644 - octoprint.plugins.action_command_notification - INFO - Got a notification: Ender-3 S1 Plus Ready.
2023-08-23 10:36:54,672 - octoprint.plugins.action_command_notification - INFO - Got a notification: Bed Cooling...
2023-08-23 10:36:54,676 - octoprint.plugins.action_command_notification - INFO - Got a notification: Ender-3 S1 Plus Ready.
2023-08-23 10:36:54,697 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Operational"
2023-08-23 10:36:54,743 - octoprint.plugins.stats - INFO - Printer Stats - on_event
2023-08-23 10:38:15,938 - octoprint.plugins.camerasettings - INFO - Excluding camera bcm2835-isp-capture0 based on ^bcm2835-isp-\w+$
2023-08-23 10:38:15,941 - octoprint.plugins.camerasettings - INFO - Excluding camera bcm2835-isp-capture1 based on ^bcm2835-isp-\w+$
2023-08-23 10:38:15,943 - octoprint.plugins.camerasettings - INFO - Excluding camera bcm2835-codec-isp based on ^bcm2835-codec-\w+$
2023-08-23 10:38:15,946 - octoprint.plugins.camerasettings - INFO - Excluding camera bcm2835-isp-output0 based on ^bcm2835-isp-\w+$
2023-08-23 10:38:16,089 - octoprint.plugins.camerasettings - INFO - Excluding camera bcm2835-codec-decode based on ^bcm2835-codec-\w+$
2023-08-23 10:38:16,123 - octoprint.plugins.camerasettings - INFO - Excluding camera bcm2835-isp-capture1 based on ^bcm2835-isp-\w+$
2023-08-23 10:38:16,126 - octoprint.plugins.camerasettings - INFO - Excluding camera bcm2835-isp-stats2 based on ^bcm2835-isp-\w+$
2023-08-23 10:38:16,128 - octoprint.plugins.camerasettings - INFO - Excluding camera bcm2835-isp-output0 based on ^bcm2835-isp-\w+$
2023-08-23 10:38:16,131 - octoprint.plugins.camerasettings - INFO - Excluding camera bcm2835-codec-encode_image based on ^bcm2835-codec-\w+$
2023-08-23 10:38:16,133 - octoprint.plugins.camerasettings - INFO - Excluding camera bcm2835-isp-capture0 based on ^bcm2835-isp-\w+$
2023-08-23 10:38:16,165 - octoprint.plugins.camerasettings - INFO - Excluding camera bcm2835-codec-encode based on ^bcm2835-codec-\w+$
2023-08-23 10:38:16,168 - octoprint.plugins.camerasettings - INFO - Excluding camera bcm2835-codec-image_fx based on ^bcm2835-codec-\w+$
2023-08-23 10:38:16,171 - octoprint.plugins.camerasettings - INFO - Excluding camera bcm2835-isp-stats2 based on ^bcm2835-isp-\w+$
2023-08-23 10:38:46,825 - octoprint.server.api.system - INFO - Performing command for core:restart: sudo service octoprint restart
2023-08-23 10:40:18,858 - octoprint.startup - INFO - ******************************************************************************
2023-08-23 10:40:18,860 - octoprint.startup - INFO - Starting OctoPrint 1.9.2
2023-08-23 10:40:18,861 - octoprint.startup - INFO - ******************************************************************************
2023-08-23 10:40:19,137 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity changed from offline to online
2023-08-23 10:40:19,161 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: online
2023-08-23 10:40:19,161 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 1.1.1.1:53 is working
2023-08-23 10:40:19,161 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is working
2023-08-23 10:40:19,460 - octoprint.startup - INFO - Blacklist processing done, adding 3 blacklisted plugin versions: roomtemp (any), GcodeEditor (>=0.1.1,<=0.2.8), gcodeleveling (>=0.1.0,<=0.1.1)
2023-08-23 10:40:19,472 - octoprint.plugin.core - INFO - Loading plugins from /home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugins, /home/jonas/.octoprint/plugins and installed plugin packages...
2023-08-23 10:40:22,375 - octoprint.plugin.core - INFO - Plugin Obico for OctoPrint (2.4.4) is disabled.
2023-08-23 10:40:23,722 - octoprint.plugin.core - INFO - Found 47 plugin(s) providing 46 mixin implementations, 121 hook handlers
2023-08-23 10:40:23,932 - octoprint.server.heartbeat - INFO - Starting server heartbeat, 900.0s interval
2023-08-23 10:40:24,126 - octoprint.server - INFO - Intermediary server started
2023-08-23 10:40:24,146 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/jonas/.octoprint/uploads...
2023-08-23 10:40:24,178 - octoprint.filemanager.storage - INFO - ... file metadata for /home/jonas/.octoprint/uploads initialized successfully.
2023-08-23 10:40:24,182 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_SHOW (needs: "Need(method='role', value='plugin_action_command_notification_show')")
2023-08-23 10:40:24,182 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_CLEAR (needs: "Need(method='role', value='plugin_action_command_notification_clear')")
2023-08-23 10:40:24,183 - octoprint.server - INFO - Added new permission from plugin action_command_prompt: PLUGIN_ACTION_COMMAND_PROMPT_INTERACT (needs: "Need(method='role', value='plugin_action_command_prompt_interact')")
2023-08-23 10:40:24,183 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_READ (needs: "Need(method='role', value='plugin_announcements_read')")
2023-08-23 10:40:24,183 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_MANAGE (needs: "Need(method='role', value='plugin_announcements_manage'), Need(method='role', value='plugin_announcements_read')")
2023-08-23 10:40:24,184 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_ADMIN (needs: "Need(method='role', value='plugin_appkeys_admin')")
2023-08-23 10:40:24,184 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_GRANT (needs: "Need(method='role', value='plugin_appkeys_user')")
2023-08-23 10:40:24,184 - octoprint.server - INFO - Added new permission from plugin backup: PLUGIN_BACKUP_ACCESS (needs: "Need(method='role', value='plugin_backup_access')")
2023-08-23 10:40:24,185 - octoprint.server - INFO - Added new permission from plugin eeprom_marlin: PLUGIN_EEPROM_MARLIN_READ (needs: "Need(method='role', value='plugin_eeprom_marlin_read')")
2023-08-23 10:40:24,185 - octoprint.server - INFO - Added new permission from plugin eeprom_marlin: PLUGIN_EEPROM_MARLIN_EDIT (needs: "Need(method='role', value='plugin_eeprom_marlin_edit')")
2023-08-23 10:40:24,185 - octoprint.server - INFO - Added new permission from plugin eeprom_marlin: PLUGIN_EEPROM_MARLIN_RESET (needs: "Need(method='role', value='plugin_eeprom_marlin_reset')")
2023-08-23 10:40:24,185 - octoprint.server - INFO - Added new permission from plugin firmware_check: PLUGIN_FIRMWARE_CHECK_DISPLAY (needs: "Need(method='role', value='plugin_firmware_check_display')")
2023-08-23 10:40:24,186 - octoprint.server - INFO - Added new permission from plugin logging: PLUGIN_LOGGING_MANAGE (needs: "Need(method='role', value='plugin_logging_manage')")
2023-08-23 10:40:24,186 - octoprint.server - INFO - Added new permission from plugin octoapp: PLUGIN_OCTOAPP_RECEIVE_NOTIFICATIONS (needs: "Need(method='role', value='plugin_octoapp_admin')")
2023-08-23 10:40:24,186 - octoprint.server - INFO - Added new permission from plugin octoapp: PLUGIN_OCTOAPP_GET_DATA (needs: "Need(method='role', value='plugin_octoapp_admin')")
2023-08-23 10:40:24,187 - octoprint.server - INFO - Added new permission from plugin pi_support: PLUGIN_PI_SUPPORT_STATUS (needs: "Need(method='role', value='plugin_pi_support_check')")
2023-08-23 10:40:24,187 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_LIST (needs: "Need(method='role', value='plugin_pluginmanager_list')")
2023-08-23 10:40:24,190 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_MANAGE (needs: "Need(method='role', value='plugin_pluginmanager_manage')")
2023-08-23 10:40:24,193 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_INSTALL (needs: "Need(method='role', value='plugin_pluginmanager_install'), Need(method='role', value='plugin_pluginmanager_manage')")
2023-08-23 10:40:24,194 - octoprint.server - INFO - Added new permission from plugin prusaslicerthumbnails: PLUGIN_PRUSASLICERTHUMBNAILS_SCAN (needs: "Need(method='role', value='plugin_prusaslicerthumbnails_admin')")
2023-08-23 10:40:24,195 - octoprint.server - INFO - Added new permission from plugin psucontrol: PLUGIN_PSUCONTROL_CONTROL (needs: "Need(method='role', value='plugin_psucontrol_admin')")
2023-08-23 10:40:24,196 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CHECK (needs: "Need(method='role', value='plugin_softwareupdate_check')")
2023-08-23 10:40:24,197 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_UPDATE (needs: "Need(method='role', value='plugin_softwareupdate_update')")
2023-08-23 10:40:24,198 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CONFIGURE (needs: "Need(method='role', value='plugin_softwareupdate_configure')")
2023-08-23 10:40:24,217 - octoprint.printer.standard - INFO - Using print time estimator provided by PrintTimeGenius
2023-08-23 10:40:25,332 - octoprint.util.pip - INFO - Using "/home/jonas/oprint/bin/python -m pip" as command to invoke pip
2023-08-23 10:40:26,356 - octoprint.util.pip - INFO - Version of pip is 22.3
2023-08-23 10:40:26,362 - octoprint.util.pip - INFO - pip installs to /home/jonas/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes
2023-08-23 10:40:26,362 - octoprint.util.pip - INFO - ==> pip ok -> yes
2023-08-23 10:40:26,620 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk
2023-08-23 10:40:26,637 - octoprint.plugins.softwareupdate - INFO - Loaded update log from disk
2023-08-23 10:40:26,765 - octoprint.plugins.firmwareupdater - INFO - Python binproto2 package installed: False
2023-08-23 10:40:26,789 - octoprint.plugins.excluderegion - INFO - Logging mode set to 'octoprint'
2023-08-23 10:40:26,790 - octoprint.plugins.excluderegion - INFO - Setting update detected: g90InfluencesExtruder=False, clearRegionsAfterPrintFinishes=False, mayShrinkRegionsWhilePrinting=False, loggingMode=octoprint, enteringExcludedRegionGcode=None, exitingExcludedRegionGcode=None, extendedExcludeGcodes={'G4': {"gcode": "G4", "mode": "exclude", "description": "Ignore all dwell commands in an excluded area to reduce delays while excluding", "type": "ExcludedGcode"}, 'M117': {"gcode": "M117", "mode": "last", "description": "Suppress display messages while excluding and output the last message encountered when exiting the excluded area", "type": "ExcludedGcode"}, 'M204': {"gcode": "M204", "mode": "merge", "description": "Record default acceleration changes while excluding and apply the most recent values in a single command after exiting the excluded area", "type": "ExcludedGcode"}, 'M205': {"gcode": "M205", "mode": "merge", "description": "Record advanced setting changes while excluding and apply the most recent values in a single command after exiting the excluded area", "type": "ExcludedGcode"}, 'M73': {"gcode": "M73", "mode": "merge", "description": "Suppress progress updates while excluding and output the most recent progress values encountered when exiting the excluded area", "type": "ExcludedGcode"}}, atCommandActions={'ExcludeRegion': [{"command": "ExcludeRegion", "parameterPattern": "^\\s*(enable|on)(\\s|$)", "action": "enable_exclusion", "description": "Default action to enable exclusion", "type": "AtCommandAction"}, {"command": "ExcludeRegion", "parameterPattern": "^\\s*(disable|off)(\\s|$)", "action": "disable_exclusion", "description": "Default action to disable exclusion", "type": "AtCommandAction"}]}
2023-08-23 10:40:26,822 - octoprint.plugins.cancelobject - INFO - No beforegcode defined
2023-08-23 10:40:26,823 - octoprint.plugins.cancelobject - INFO - No aftergcode defined
2023-08-23 10:40:26,845 - octoprint.plugins.eeprom_marlin - INFO - EEPROM Data initialised
2023-08-23 10:40:26,847 - octoprint.plugins.eeprom_marlin - INFO - Backup metadata initialised
2023-08-23 10:40:26,848 - octoprint.plugins.eeprom_marlin - INFO - All EEPROM editor modules loaded
2023-08-23 10:40:26,884 - octoprint.plugin.core - INFO - Initialized 46 plugin implementation(s)
2023-08-23 10:40:27,006 - octoprint - INFO - Installing webcam compat overlay for configured default webcam <octoprint.webcams.ProvidedWebcam object at 0xab592f40>
2023-08-23 10:40:27,008 - octoprint.plugin.core - INFO - 47 plugin(s) registered with the system:
|  ABL Expert Plugin (0.6) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_ABL_Expert
|  Action Command Notification Support (bundled) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_notification
|  Action Command Prompt Support (bundled) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_prompt
|  Announcement Plugin (bundled) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugins/announcements
|  Anonymous Usage Tracking (bundled) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugins/tracking
|  Application Keys Plugin (bundled) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugins/appkeys
|  Backup & Restore (bundled) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugins/backup
|  Bed Visualizer (1.1.1) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_bedlevelvisualizer
|  Camera Settings (0.4.3) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_CameraSettings
|  Cancel Objects (0.4.7) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_cancelobject
|  Classic Webcam (bundled) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugins/classicwebcam
|  Core Wizard (bundled) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugins/corewizard
|  Creality Temperature (1.2.4) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_CrealityTemperature
|  Detailed Progress (0.2.7) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_detailedprogress
|  Discovery (bundled) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugins/discovery
|  DisplayProgress (0.1.3) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_displayprogress
|  Error Tracking (bundled) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugins/errortracking
|  Event Manager (bundled) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugins/eventmanager
|  Exclude Region (0.3.2) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_excluderegion
|  File Check (2021.2.23) (bundled) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_file_check
|  Firmware Check (2021.10.11) (bundled) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_firmware_check
|  Firmware Updater (1.14.0) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_firmwareupdater
|  GCode Viewer (bundled) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugins/gcodeviewer
|  HomeAssistant Discovery (3.7.0) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_homeassistant
|  Logging (bundled) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugins/logging
|  M73 Progress Plugin (0.2.1) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_m73progress
|  Marlin EEPROM Editor (3.3.0) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_eeprom_marlin
|  Navbar Temperature Plugin (0.15) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_navbartemp
| !Obico for OctoPrint (2.4.4) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_obico
|  OctoApp (1.3.2) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_octoapp
|  OctoEverywhere! (2.7.6) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_octoeverywhere
|  Octolapse (0.4.3) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_octolapse
|  Octoprint Display ETA (2.2.0) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_display_eta
|  Pi Support Plugin (2023.7.31) (bundled) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_pi_support
|  Plugin Manager (bundled) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugins/pluginmanager
|  PrettyGCode (1.2.4) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_prettygcode
|  Print History Plugin (1.4.1) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_printhistory
|  Printer Stats (3.1.4) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_stats
|  PrintTimeGenius Plugin (2.3.1) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_PrintTimeGenius
|  PSU Control (1.0.6) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_psucontrol
|  PSU Control - Home Assistant (1.0.5) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_psucontrol_homeassistant
|  Slicer Thumbnails (1.0.2) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_prusaslicerthumbnails
|  Software Update (bundled) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugins/softwareupdate
|  Tab Order (0.5.12) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_taborder
|  Themeify (1.2.2) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_themeify
|  Virtual Printer (bundled) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugins/virtual_printer
|  Z Probe Offset (0.5) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_z_probe_offset
Prefix legend: ! = disabled, # = blacklisted, * = incompatible
2023-08-23 10:40:27,044 - octoprint.environment - INFO - Detected environment is Python 3.9.2 under Linux (linux). Details:
|  hardware:
|    cores: 4
|    freq: 1500.0
|    ram: 1908686848
|  os:
|    bits: 32
|    id: linux
|    platform: linux
|  plugins:
|    pi_support:
|      model: Raspberry Pi 4 Model B Rev 1.1
|      octopi_version: 1.0.0
|      octopiuptodate_build: 1.0.0-1.9.2-20230718111854
|      octopiuptodate_build_short: 2023.07.18.111854
|      throttle_check_enabled: true
|      throttle_check_functional: true
|      throttle_state: '0x0'
|  python:
|    pip: '22.3'
|    version: 3.9.2
|    virtualenv: /home/jonas/oprint
2023-08-23 10:40:27,066 - octoprint.server - INFO - Reset webasset folder /home/jonas/.octoprint/generated/webassets...
2023-08-23 10:40:27,067 - octoprint.server - INFO - Reset webasset folder /home/jonas/.octoprint/generated/.webassets-cache...
2023-08-23 10:40:27,068 - octoprint.server - INFO - Reset webasset folder /home/jonas/.octoprint/generated/.webassets-manifest.json...
2023-08-23 10:40:27,184 - octoprint.plugins.bedlevelvisualizer - WARNING - The Blueprint of this plugin is relying on the default implementation of is_blueprint_csrf_protected (newly added in OctoPrint 1.8.3), which in a future version will be switched from False to True for security reasons. Plugin authors should ensure they explicitly declare the CSRF protection status in their BlueprintPlugin mixin implementation. Recommendation is to enable CSRF protection and exempt views that must not use it with the octoprint.plugin.BlueprintPlugin.csrf_exempt decorator.
2023-08-23 10:40:27,184 - octoprint.server - WARNING - CSRF Protection for Blueprint of plugin bedlevelvisualizer is DISABLED
2023-08-23 10:40:27,192 - octoprint.plugins.octolapse - WARNING - The Blueprint of this plugin is relying on the default implementation of is_blueprint_csrf_protected (newly added in OctoPrint 1.8.3), which in a future version will be switched from False to True for security reasons. Plugin authors should ensure they explicitly declare the CSRF protection status in their BlueprintPlugin mixin implementation. Recommendation is to enable CSRF protection and exempt views that must not use it with the octoprint.plugin.BlueprintPlugin.csrf_exempt decorator.
2023-08-23 10:40:27,193 - octoprint.server - WARNING - CSRF Protection for Blueprint of plugin octolapse is DISABLED
2023-08-23 10:40:27,195 - octoprint.plugins.printhistory - WARNING - The Blueprint of this plugin is relying on the default implementation of is_blueprint_csrf_protected (newly added in OctoPrint 1.8.3), which in a future version will be switched from False to True for security reasons. Plugin authors should ensure they explicitly declare the CSRF protection status in their BlueprintPlugin mixin implementation. Recommendation is to enable CSRF protection and exempt views that must not use it with the octoprint.plugin.BlueprintPlugin.csrf_exempt decorator.
2023-08-23 10:40:27,195 - octoprint.server - WARNING - CSRF Protection for Blueprint of plugin printhistory is DISABLED
2023-08-23 10:40:27,625 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:40:27,642 - octoprint.plugins.firmwareupdater - INFO - Setting maximum upload size for /flash to 5243904
2023-08-23 10:40:27,643 - octoprint.server - INFO - Shutting down intermediary server...
2023-08-23 10:40:27,813 - octoprint.server - INFO - Intermediary server shut down
2023-08-23 10:40:27,817 - octoprint.events - INFO - Processing startup event, this is our first event
2023-08-23 10:40:27,817 - octoprint.events - INFO - Adding 2 events to queue that were held back before startup event
2023-08-23 10:40:27,818 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue...
2023-08-23 10:40:27,820 - octoprint.server - INFO - Autoconnect on startup is configured, trying to connect to the printer...
2023-08-23 10:40:27,825 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue
2023-08-23 10:40:27,869 - octoprint.server - INFO - Trying to connect to configured serial port None
2023-08-23 10:40:27,941 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json
2023-08-23 10:40:28,025 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid
2023-08-23 10:40:28,177 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection"
2023-08-23 10:40:28,192 - octoprint.plugins.tracking - INFO - Sent tracking event system_unthrottled, payload: {'throttled_now': False, 'throttled_past': False, 'throttled_mask': 0, 'throttled_voltage_now': False, 'throttled_voltage_past': False, 'throttled_overheat_now': False, 'throttled_overheat_past': False}
2023-08-23 10:40:28,202 - octoprint.server - INFO - Starting autorefresh of serial port list
2023-08-23 10:40:28,263 - octoprint.server - INFO - Autorefresh of serial port list stopped
2023-08-23 10:40:28,311 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 1 port/baudrate candidates: /dev/ttyUSB0@115200
2023-08-23 10:40:28,311 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200
2023-08-23 10:40:28,321 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder...
2023-08-23 10:40:28,330 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200
2023-08-23 10:40:28,332 - octoprint.server.util.watchdog - INFO - ... initial scan done.
2023-08-23 10:40:28,374 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s
2023-08-23 10:40:28,399 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2023-08-23 10:40:28,522 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Operational"
2023-08-23 10:40:28,575 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2023-08-23 10:40:28,598 - octoprint.plugins.firmwareupdater - INFO - Got CONNECTED event
2023-08-23 10:40:28,733 - octoprint.plugins.firmwareupdater - INFO - Run postflash flag is not set
2023-08-23 10:40:28,841 - octoprint.plugins.stats - INFO - Printer Stats - on_event
2023-08-23 10:40:28,948 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin abl10x10-v006-byTT (Aug 15 2023 13:10:26)"
2023-08-23 10:40:28,982 - octoprint.plugins.firmwareupdater - INFO - Setting BINARY_FILE_TRANSFER capability to False
2023-08-23 10:40:28,989 - octoprint.plugins.ABL_Expert - INFO - self.printer_cap[eeprom] is now 1

2023-08-23 10:40:28,990 - octoprint.plugins.z_probe_offset - INFO - Printer_cap[eeprom]:1
2023-08-23 10:40:29,221 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting
2023-08-23 10:40:29,253 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {'firmware_name': 'Marlin abl10x10-v006-byTT (Aug 15 2023 13:10:26)', 'printer_port': None, 'printer_baudrate': 115200}
2023-08-23 10:40:29,283 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:40:29,284 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:40:29,351 - octoprint.plugins.ABL_Expert - INFO - self.printer_cap[autolevel] is now 1

2023-08-23 10:40:29,355 - octoprint.plugins.ABL_Expert - INFO - self.printer_cap[z_probe] is now 1

2023-08-23 10:40:29,356 - octoprint.plugins.z_probe_offset - INFO - Printer_cap[z_probe]:1
2023-08-23 10:40:29,367 - octoprint.plugins.ABL_Expert - INFO - self.printer_cap[leveling_data] is now 1

2023-08-23 10:40:29,389 - octoprint.util.comm - INFO - Firmware states that it supports emergency GCODEs to be sent without waiting for an acknowledgement first
2023-08-23 10:40:29,448 - octoprint.util.comm - INFO - Firmware states that it supports long filenames
2023-08-23 10:40:29,742 - octoprint.plugins.z_probe_offset - INFO - Z probe offset is now -3.05
2023-08-23 10:40:29,808 - octoprint.plugins.eeprom_marlin - INFO - M503 detected, collecting data
2023-08-23 10:40:29,833 - octoprint.plugins.eeprom_marlin - WARNING - EEPROM output line not recognized, skipped
2023-08-23 10:40:29,833 - octoprint.plugins.eeprom_marlin - WARNING - Line: echo:  M149 C ; Units in Celsius
2023-08-23 10:40:29,849 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid
2023-08-23 10:40:29,887 - octoprint.plugins.eeprom_marlin - WARNING - EEPROM output line not recognized, skipped
2023-08-23 10:40:29,887 - octoprint.plugins.eeprom_marlin - WARNING - Line: echo:  M221 S100
2023-08-23 10:40:30,192 - octoprint.plugins.eeprom_marlin - WARNING - EEPROM output line not recognized, skipped
2023-08-23 10:40:30,192 - octoprint.plugins.eeprom_marlin - WARNING - Line: echo:  M413 S1 ; ON
2023-08-23 10:40:30,198 - octoprint.plugins.z_probe_offset - INFO - Z probe offset is now -3.05
2023-08-23 10:40:30,238 - octoprint.plugins.eeprom_marlin - INFO - Finished data collection, updating UI
2023-08-23 10:40:30,244 - octoprint.util.comm - INFO - Externally triggered heatup detected
2023-08-23 10:40:30,254 - octoprint.plugins.ABL_Expert - INFO - Grid mesh size is 10
2023-08-23 10:40:30,338 - octoprint.plugins.z_probe_offset - INFO - Z probe offset is now -3.05
2023-08-23 10:40:30,916 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance "S1 Plus"._http._tcp.local.' for _http._tcp.local.
2023-08-23 10:40:31,750 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance "S1 Plus"._octoprint._tcp.local.' for _octoprint._tcp.local.
2023-08-23 10:40:31,766 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance "S1 Plus" for SSDP
2023-08-23 10:40:31,866 - octoprint.plugins.octoeverywhere - INFO - OctoPrint host:127.0.0.1 port:5000
2023-08-23 10:40:31,872 - octoprint.plugins.octoeverywhere - INFO - OctoPingPong stats loaded from file.
2023-08-23 10:40:31,874 - octoprint.plugins.octoeverywhere - INFO - mDns Cache file loaded. Cached Entries Found: 0
2023-08-23 10:40:31,877 - octoprint.plugins.psucontrol - INFO - Registered plugin - psucontrol_homeassistant
2023-08-23 10:40:31,878 - octoprint.server - INFO - Listening on http://127.0.0.1:5000
2023-08-23 10:40:31,950 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid
2023-08-23 10:40:31,990 - octoprint.plugins.octoeverywhere - INFO - IPV4 - starport:142.93.161.88 main:172.67.223.103
2023-08-23 10:40:32,015 - octoprint.plugins.octoeverywhere - INFO - Failed to resolve host ipv6 name [Errno -2] Name or service not known
2023-08-23 10:40:33,019 - octoprint.util.pip - INFO - Using "/home/jonas/oprint/bin/python -m pip" as command to invoke pip
2023-08-23 10:40:33,020 - octoprint.util.pip - INFO - pip installs to /home/jonas/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes
2023-08-23 10:40:33,020 - octoprint.util.pip - INFO - ==> pip ok -> yes
2023-08-23 10:40:33,032 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 3.2GB. That is considered sufficient for updating.
2023-08-23 10:40:33,435 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid
2023-08-23 10:40:34,618 - octoprint.plugins.bedlevelvisualizer - INFO - OctoPrint-BedLevelVisualizer loaded!
2023-08-23 10:40:34,619 - octoprint.plugins.detailedprogress - INFO - OctoPrint-DetailedProgress loaded!
2023-08-23 10:40:34,627 - octoprint.plugins.homeassistant - INFO - PSUControl helpers found
2023-08-23 10:40:34,630 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:40:34,641 - octoprint.plugin - ERROR - Error while calling plugin homeassistant
Traceback (most recent call last):
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugin/__init__.py", line 275, in call_plugin
    result = getattr(plugin, method)(*args, **kwargs)
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/util/__init__.py", line 1686, in wrapper
    return f(*args, **kwargs)
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint_homeassistant/__init__.py", line 179, in on_after_startup
    self._generate_device_registration()
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint_homeassistant/__init__.py", line 262, in _generate_device_registration
    self._generate_sensor(
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint_homeassistant/__init__.py", line 610, in _generate_sensor
    self.mqtt_publish(topic, payload, allow_queueing=True)
TypeError: 'NoneType' object is not callable
2023-08-23 10:40:34,710 - octoprint.plugins.octoeverywhere - INFO - After startup called. Starting worker thread.
2023-08-23 10:40:34,716 - octoprint.plugins.octoeverywhere - INFO - Main thread starting
2023-08-23 10:40:34,745 - octoprint.plugins.prettygcode - INFO - Pretty GCode.
2023-08-23 10:40:34,779 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 13, 'printer_state': 'OPERATIONAL'}
2023-08-23 10:40:34,786 - octoprint.plugins.octoeverywhere - INFO - Frontend http port detected as 80, is https? False
2023-08-23 10:40:34,798 - octoprint.plugins.octoeverywhere - INFO - Attempting to use lowest latency server: wss://fra.octoeverywhere.com/octoclientws
2023-08-23 10:40:34,799 - octoprint.plugins.octoeverywhere - INFO - Attempting to talk to OctoEverywhere, server con wss://fra.octoeverywhere.com/octoclientws[1] wsId:2774550440
2023-08-23 10:40:34,810 - octoprint.plugins.stats - INFO - Printer Stats
2023-08-23 10:40:34,816 - octoprint.plugins.themeify - INFO - Themeify initialized.
2023-08-23 10:40:34,933 - octoprint.plugins.tracking - INFO - Sent tracking event pong, payload: {'version': '1.9.2', 'os': 'linux', 'bits': 32, 'python': '3.9.2', 'pip': '22.3', 'cores': 4, 'freq': 1500.0, 'ram': 1908686848, 'pi_model': 'Raspberry Pi 4 Model B Rev 1.1', 'octopi_version': '1.0.0', 'octopiuptodate_build': '1.0.0-1.9.2-20230718111854', 'plugins': 'z_probe_offset:0.5,themeify:1.2.2,prusaslicerthumbnails:1.0.2,taborder:0.5.12,stats:3.1.4,psucontrol:1.0.6,psucontrol_homeassistant:1.0.5,printtimegenius:2.3.1,printhistory:1.4.1,prettygcode:1.2.4,navbartemp:0.15,homeassistant:3.7.0,firmwareupdater:1.14.0,excluderegion:0.3.2,displayprogress:0.1.3,display_eta:2.2.0,detailedprogress:0.2.7,crealitytemperature:1.2.4,cancelobject:0.4.7,camerasettings:0.4.3,octolapse:0.4.3,octoeverywhere:2.7.6,octoapp:1.3.2,eeprom_marlin:3.3.0,m73progress:0.2.1,bedlevelvisualizer:1.1.1,abl_expert:0.6'}
2023-08-23 10:40:35,008 - octoprint.plugins.octoeverywhere - INFO - Connected To OctoEverywhere, server con wss://fra.octoeverywhere.com/octoclientws[1]. Starting handshake...
2023-08-23 10:40:35,091 - octoprint.plugins.tracking - INFO - Sent tracking event startup, payload: {'version': '1.9.2', 'os': 'linux', 'bits': 32, 'python': '3.9.2', 'pip': '22.3', 'cores': 4, 'freq': 1500.0, 'ram': 1908686848, 'pi_model': 'Raspberry Pi 4 Model B Rev 1.1', 'octopi_version': '1.0.0', 'octopiuptodate_build': '1.0.0-1.9.2-20230718111854'}
2023-08-23 10:40:35,125 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'http://192.168.178.179/', 'path': '/', 'query_string': 'l10n=en'}
2023-08-23 10:40:35,318 - octoprint.plugins.octoeverywhere - INFO - Handshake complete, server con wss://fra.octoeverywhere.com/octoclientws[1], successfully connected to OctoEverywhere!
2023-08-23 10:40:38,053 - octoprint.server.views - ERROR - Error while retrieving template data for plugin homeassistant, ignoring it
Traceback (most recent call last):
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/server/views.py", line 1271, in fetch_template_data
    wizard_required = implementation.is_wizard_required()
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/util/__init__.py", line 1686, in wrapper
    return f(*args, **kwargs)
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint_homeassistant/__init__.py", line 1197, in is_wizard_required
    _retain = settings().get_boolean(
AttributeError: 'Settings' object has no attribute 'get_boolean'
2023-08-23 10:40:38,087 - octoprint.server.views - ERROR - Error while retrieving template data for plugin homeassistant, ignoring it
Traceback (most recent call last):
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/server/views.py", line 1271, in fetch_template_data
    wizard_required = implementation.is_wizard_required()
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/util/__init__.py", line 1686, in wrapper
    return f(*args, **kwargs)
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint_homeassistant/__init__.py", line 1197, in is_wizard_required
    _retain = settings().get_boolean(
AttributeError: 'Settings' object has no attribute 'get_boolean'
2023-08-23 10:40:39,393 - octoprint.server.util.flask - INFO - Passively logging in user jonas from 127.0.0.1
2023-08-23 10:40:39,403 - octoprint.access.users - INFO - Logged in user: jonas
2023-08-23 10:40:47,903 - octoprint.util.jinja - WARNING - Loading plugin template '/webcams/mjpg_streamer/logitech_c920.jinja2' from '/home/jonas/oprint/lib/python3.9/site-packages/octoprint_octolapse/templates/webcams/mjpg_streamer/logitech_c920.jinja2' without plugin prefix, this is deprecated and will soon no longer be supported.
2023-08-23 10:40:47,909 - octoprint.util.jinja - WARNING - Loading plugin template '/webcams/mjpg_streamer/logitech_c920.jinja2' from '/home/jonas/oprint/lib/python3.9/site-packages/octoprint_octolapse/templates/webcams/mjpg_streamer/logitech_c920.jinja2' without plugin prefix, this is deprecated and will soon no longer be supported.
2023-08-23 10:40:47,928 - octoprint.util.jinja - WARNING - Loading plugin template '/webcams/mjpg_streamer/raspi_cam_v2.jinja2' from '/home/jonas/oprint/lib/python3.9/site-packages/octoprint_octolapse/templates/webcams/mjpg_streamer/raspi_cam_v2.jinja2' without plugin prefix, this is deprecated and will soon no longer be supported.
2023-08-23 10:40:47,936 - octoprint.util.jinja - WARNING - Loading plugin template '/webcams/mjpg_streamer/raspi_cam_v2.jinja2' from '/home/jonas/oprint/lib/python3.9/site-packages/octoprint_octolapse/templates/webcams/mjpg_streamer/raspi_cam_v2.jinja2' without plugin prefix, this is deprecated and will soon no longer be supported.
2023-08-23 10:40:47,959 - octoprint.util.jinja - WARNING - Loading plugin template '/webcams/mjpg_streamer/logitech_c250.jinja2' from '/home/jonas/oprint/lib/python3.9/site-packages/octoprint_octolapse/templates/webcams/mjpg_streamer/logitech_c250.jinja2' without plugin prefix, this is deprecated and will soon no longer be supported.
2023-08-23 10:40:47,965 - octoprint.util.jinja - WARNING - Loading plugin template '/webcams/mjpg_streamer/logitech_c250.jinja2' from '/home/jonas/oprint/lib/python3.9/site-packages/octoprint_octolapse/templates/webcams/mjpg_streamer/logitech_c250.jinja2' without plugin prefix, this is deprecated and will soon no longer be supported.
2023-08-23 10:40:53,759 - octoprint.server.preemptive_cache - INFO - ... done in 18.63s
2023-08-23 10:40:53,759 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'https://127.0.0.1:5000/', 'path': '/', 'query_string': 'l10n=en'}
2023-08-23 10:40:56,277 - octoprint.server.views - ERROR - Error while retrieving template data for plugin homeassistant, ignoring it
Traceback (most recent call last):
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/server/views.py", line 1271, in fetch_template_data
    wizard_required = implementation.is_wizard_required()
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/util/__init__.py", line 1686, in wrapper
    return f(*args, **kwargs)
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint_homeassistant/__init__.py", line 1197, in is_wizard_required
    _retain = settings().get_boolean(
AttributeError: 'Settings' object has no attribute 'get_boolean'
2023-08-23 10:40:56,865 - octoprint.plugins.octoeverywhere - INFO - Slipstream took 22.128912925720215 to fully update the cache
2023-08-23 10:40:58,401 - octoprint.server.preemptive_cache - INFO - ... done in 4.64s
2023-08-23 10:40:58,401 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'https://s1plus.octoeverywhere.com/', 'path': '/', 'query_string': 'l10n=en'}
2023-08-23 10:40:59,476 - octoprint.server.views - ERROR - Error while retrieving template data for plugin homeassistant, ignoring it
Traceback (most recent call last):
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/server/views.py", line 1271, in fetch_template_data
    wizard_required = implementation.is_wizard_required()
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/util/__init__.py", line 1686, in wrapper
    return f(*args, **kwargs)
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint_homeassistant/__init__.py", line 1197, in is_wizard_required
    _retain = settings().get_boolean(
AttributeError: 'Settings' object has no attribute 'get_boolean'
2023-08-23 10:41:01,538 - octoprint.server.preemptive_cache - INFO - ... done in 3.14s
2023-08-23 10:42:38,210 - octoprint.server.views - ERROR - Error while retrieving template data for plugin homeassistant, ignoring it
Traceback (most recent call last):
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/server/views.py", line 1271, in fetch_template_data
    wizard_required = implementation.is_wizard_required()
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/util/__init__.py", line 1686, in wrapper
    return f(*args, **kwargs)
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint_homeassistant/__init__.py", line 1197, in is_wizard_required
    _retain = settings().get_boolean(
AttributeError: 'Settings' object has no attribute 'get_boolean'
2023-08-23 10:42:38,824 - octoprint.server.util.flask - INFO - Passively logging in user jonas from ::ffff:192.168.178.21
2023-08-23 10:42:38,825 - octoprint.access.users - INFO - Logged in user: jonas
2023-08-23 10:42:38,939 - octoprint.server.util.flask - INFO - Passively logging in user jonas from ::ffff:192.168.178.21
2023-08-23 10:42:38,939 - octoprint.access.users - INFO - Logged in user: jonas
2023-08-23 10:42:39,974 - octoprint.server.views - ERROR - Error while retrieving template data for plugin homeassistant, ignoring it
Traceback (most recent call last):
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/server/views.py", line 1271, in fetch_template_data
    wizard_required = implementation.is_wizard_required()
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/util/__init__.py", line 1686, in wrapper
    return f(*args, **kwargs)
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint_homeassistant/__init__.py", line 1197, in is_wizard_required
    _retain = settings().get_boolean(
AttributeError: 'Settings' object has no attribute 'get_boolean'
2023-08-23 10:42:40,593 - octoprint.server.util.flask - INFO - Passively logging in user jonas from ::ffff:192.168.178.21
2023-08-23 10:42:40,593 - octoprint.access.users - INFO - Logged in user: jonas
2023-08-23 10:42:42,688 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.178.21
2023-08-23 10:42:42,788 - octoprint.server.util.flask - INFO - Passively logging in user jonas from ::ffff:192.168.178.21
2023-08-23 10:42:42,789 - octoprint.access.users - INFO - Logged in user: jonas
2023-08-23 10:42:46,042 - octoprint.server.util.sockjs - INFO - User jonas logged in on the socket from client ::ffff:192.168.178.21
2023-08-23 10:42:46,330 - octoprint.server.api - ERROR - There was an error fetching wizard details for homeassistant, ignoring
Traceback (most recent call last):
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/server/api/__init__.py", line 194, in wizardState
    required = implementation.is_wizard_required()
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/util/__init__.py", line 1686, in wrapper
    return f(*args, **kwargs)
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint_homeassistant/__init__.py", line 1197, in is_wizard_required
    _retain = settings().get_boolean(
AttributeError: 'Settings' object has no attribute 'get_boolean'
2023-08-23 10:42:47,062 - octoprint.plugins.tracking - INFO - Sent tracking event webui_load, payload: {'browser_name': 'Chrome', 'browser_version': '116.0.0.0', 'os_name': 'Windows', 'os_version': '10'}
2023-08-23 10:42:47,078 - octoprint.server.api - ERROR - There was an error fetching wizard details for homeassistant, ignoring
Traceback (most recent call last):
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/server/api/__init__.py", line 194, in wizardState
    required = implementation.is_wizard_required()
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/util/__init__.py", line 1686, in wrapper
    return f(*args, **kwargs)
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint_homeassistant/__init__.py", line 1197, in is_wizard_required
    _retain = settings().get_boolean(
AttributeError: 'Settings' object has no attribute 'get_boolean'
2023-08-23 10:43:21,654 - octoprint.server.views - ERROR - Error while retrieving template data for plugin homeassistant, ignoring it
Traceback (most recent call last):
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/server/views.py", line 1271, in fetch_template_data
    wizard_required = implementation.is_wizard_required()
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/util/__init__.py", line 1686, in wrapper
    return f(*args, **kwargs)
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint_homeassistant/__init__.py", line 1197, in is_wizard_required
    _retain = settings().get_boolean(
AttributeError: 'Settings' object has no attribute 'get_boolean'
2023-08-23 10:43:22,261 - octoprint.server.util.flask - INFO - Passively logging in user jonas from ::ffff:192.168.178.21
2023-08-23 10:43:22,262 - octoprint.access.users - INFO - Logged in user: jonas
2023-08-23 10:43:29,839 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.178.21
2023-08-23 10:43:34,003 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.178.21
2023-08-23 10:43:34,146 - octoprint.server.util.flask - INFO - Passively logging in user jonas from ::ffff:192.168.178.21
2023-08-23 10:43:34,147 - octoprint.access.users - INFO - Logged in user: jonas
2023-08-23 10:43:37,538 - octoprint.server.util.sockjs - INFO - User jonas logged in on the socket from client ::ffff:192.168.178.21
2023-08-23 10:43:38,534 - octoprint.plugins.tracking - INFO - Sent tracking event webui_load, payload: {'browser_name': 'Chrome', 'browser_version': '116.0.0.0', 'os_name': 'Windows', 'os_version': '10'}
2023-08-23 10:44:32,507 - octoprint.plugins.camerasettings - INFO - Excluding camera bcm2835-isp-capture0 based on ^bcm2835-isp-\w+$
2023-08-23 10:44:32,510 - octoprint.plugins.camerasettings - INFO - Excluding camera bcm2835-isp-capture1 based on ^bcm2835-isp-\w+$
2023-08-23 10:44:32,512 - octoprint.plugins.camerasettings - INFO - Excluding camera bcm2835-codec-isp based on ^bcm2835-codec-\w+$
2023-08-23 10:44:32,514 - octoprint.plugins.camerasettings - INFO - Excluding camera bcm2835-isp-output0 based on ^bcm2835-isp-\w+$
2023-08-23 10:44:32,630 - octoprint.plugins.camerasettings - INFO - Excluding camera bcm2835-codec-decode based on ^bcm2835-codec-\w+$
2023-08-23 10:44:32,664 - octoprint.plugins.camerasettings - INFO - Excluding camera bcm2835-isp-capture1 based on ^bcm2835-isp-\w+$
2023-08-23 10:44:32,667 - octoprint.plugins.camerasettings - INFO - Excluding camera bcm2835-isp-stats2 based on ^bcm2835-isp-\w+$
2023-08-23 10:44:32,669 - octoprint.plugins.camerasettings - INFO - Excluding camera bcm2835-isp-output0 based on ^bcm2835-isp-\w+$
2023-08-23 10:44:32,672 - octoprint.plugins.camerasettings - INFO - Excluding camera bcm2835-codec-encode_image based on ^bcm2835-codec-\w+$
2023-08-23 10:44:32,674 - octoprint.plugins.camerasettings - INFO - Excluding camera bcm2835-isp-capture0 based on ^bcm2835-isp-\w+$
2023-08-23 10:44:32,707 - octoprint.plugins.camerasettings - INFO - Excluding camera bcm2835-codec-encode based on ^bcm2835-codec-\w+$
2023-08-23 10:44:32,710 - octoprint.plugins.camerasettings - INFO - Excluding camera bcm2835-codec-image_fx based on ^bcm2835-codec-\w+$
2023-08-23 10:44:32,712 - octoprint.plugins.camerasettings - INFO - Excluding camera bcm2835-isp-stats2 based on ^bcm2835-isp-\w+$
2023-08-23 10:53:41,644 - octoprint.startup - INFO - ******************************************************************************
2023-08-23 10:53:41,647 - octoprint.startup - INFO - Starting OctoPrint 1.9.2
2023-08-23 10:53:41,653 - octoprint.startup - INFO - ******************************************************************************
2023-08-23 10:53:48,221 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: offline
2023-08-23 10:53:48,222 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 1.1.1.1:53 is not working
2023-08-23 10:53:48,222 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is not working
2023-08-23 10:53:48,229 - octoprint.startup - INFO - We don't appear to be online, not fetching plugin blacklist
2023-08-23 10:53:48,237 - octoprint.plugin.core - INFO - Loading plugins from /home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugins, /home/jonas/.octoprint/plugins and installed plugin packages...
2023-08-23 10:53:53,200 - octoprint.plugin.core - INFO - Plugin Obico for OctoPrint (2.4.4) is disabled.
2023-08-23 10:53:55,094 - octoprint.plugin.core - INFO - Found 47 plugin(s) providing 46 mixin implementations, 121 hook handlers
2023-08-23 10:53:55,301 - octoprint.server.heartbeat - INFO - Starting server heartbeat, 900.0s interval
2023-08-23 10:53:55,567 - octoprint.server - INFO - Intermediary server started
2023-08-23 10:53:55,589 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/jonas/.octoprint/uploads...
2023-08-23 10:53:55,631 - octoprint.filemanager.storage - INFO - ... file metadata for /home/jonas/.octoprint/uploads initialized successfully.
2023-08-23 10:53:55,636 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_SHOW (needs: "Need(method='role', value='plugin_action_command_notification_show')")
2023-08-23 10:53:55,636 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_CLEAR (needs: "Need(method='role', value='plugin_action_command_notification_clear')")
2023-08-23 10:53:55,637 - octoprint.server - INFO - Added new permission from plugin action_command_prompt: PLUGIN_ACTION_COMMAND_PROMPT_INTERACT (needs: "Need(method='role', value='plugin_action_command_prompt_interact')")
2023-08-23 10:53:55,637 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_READ (needs: "Need(method='role', value='plugin_announcements_read')")
2023-08-23 10:53:55,637 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_MANAGE (needs: "Need(method='role', value='plugin_announcements_manage'), Need(method='role', value='plugin_announcements_read')")
2023-08-23 10:53:55,638 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_ADMIN (needs: "Need(method='role', value='plugin_appkeys_admin')")
2023-08-23 10:53:55,638 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_GRANT (needs: "Need(method='role', value='plugin_appkeys_user')")
2023-08-23 10:53:55,638 - octoprint.server - INFO - Added new permission from plugin backup: PLUGIN_BACKUP_ACCESS (needs: "Need(method='role', value='plugin_backup_access')")
2023-08-23 10:53:55,639 - octoprint.server - INFO - Added new permission from plugin eeprom_marlin: PLUGIN_EEPROM_MARLIN_READ (needs: "Need(method='role', value='plugin_eeprom_marlin_read')")
2023-08-23 10:53:55,639 - octoprint.server - INFO - Added new permission from plugin eeprom_marlin: PLUGIN_EEPROM_MARLIN_EDIT (needs: "Need(method='role', value='plugin_eeprom_marlin_edit')")
2023-08-23 10:53:55,639 - octoprint.server - INFO - Added new permission from plugin eeprom_marlin: PLUGIN_EEPROM_MARLIN_RESET (needs: "Need(method='role', value='plugin_eeprom_marlin_reset')")
2023-08-23 10:53:55,639 - octoprint.server - INFO - Added new permission from plugin firmware_check: PLUGIN_FIRMWARE_CHECK_DISPLAY (needs: "Need(method='role', value='plugin_firmware_check_display')")
2023-08-23 10:53:55,640 - octoprint.server - INFO - Added new permission from plugin logging: PLUGIN_LOGGING_MANAGE (needs: "Need(method='role', value='plugin_logging_manage')")
2023-08-23 10:53:55,640 - octoprint.server - INFO - Added new permission from plugin octoapp: PLUGIN_OCTOAPP_RECEIVE_NOTIFICATIONS (needs: "Need(method='role', value='plugin_octoapp_admin')")
2023-08-23 10:53:55,640 - octoprint.server - INFO - Added new permission from plugin octoapp: PLUGIN_OCTOAPP_GET_DATA (needs: "Need(method='role', value='plugin_octoapp_admin')")
2023-08-23 10:53:55,641 - octoprint.server - INFO - Added new permission from plugin pi_support: PLUGIN_PI_SUPPORT_STATUS (needs: "Need(method='role', value='plugin_pi_support_check')")
2023-08-23 10:53:55,641 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_LIST (needs: "Need(method='role', value='plugin_pluginmanager_list')")
2023-08-23 10:53:55,641 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_MANAGE (needs: "Need(method='role', value='plugin_pluginmanager_manage')")
2023-08-23 10:53:55,642 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_INSTALL (needs: "Need(method='role', value='plugin_pluginmanager_manage'), Need(method='role', value='plugin_pluginmanager_install')")
2023-08-23 10:53:55,644 - octoprint.server - INFO - Added new permission from plugin prusaslicerthumbnails: PLUGIN_PRUSASLICERTHUMBNAILS_SCAN (needs: "Need(method='role', value='plugin_prusaslicerthumbnails_admin')")
2023-08-23 10:53:55,645 - octoprint.server - INFO - Added new permission from plugin psucontrol: PLUGIN_PSUCONTROL_CONTROL (needs: "Need(method='role', value='plugin_psucontrol_admin')")
2023-08-23 10:53:55,646 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CHECK (needs: "Need(method='role', value='plugin_softwareupdate_check')")
2023-08-23 10:53:55,648 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_UPDATE (needs: "Need(method='role', value='plugin_softwareupdate_update')")
2023-08-23 10:53:55,649 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CONFIGURE (needs: "Need(method='role', value='plugin_softwareupdate_configure')")
2023-08-23 10:53:55,671 - octoprint.printer.standard - INFO - Using print time estimator provided by PrintTimeGenius
2023-08-23 10:53:56,946 - octoprint.util.pip - INFO - Using "/home/jonas/oprint/bin/python -m pip" as command to invoke pip
2023-08-23 10:53:57,910 - octoprint.util.pip - INFO - Version of pip is 22.3
2023-08-23 10:53:57,916 - octoprint.util.pip - INFO - pip installs to /home/jonas/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes
2023-08-23 10:53:57,916 - octoprint.util.pip - INFO - ==> pip ok -> yes
2023-08-23 10:53:58,174 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk
2023-08-23 10:53:58,190 - octoprint.plugins.softwareupdate - INFO - Loaded update log from disk
2023-08-23 10:53:58,319 - octoprint.plugins.firmwareupdater - INFO - Python binproto2 package installed: False
2023-08-23 10:53:58,343 - octoprint.plugins.excluderegion - INFO - Logging mode set to 'octoprint'
2023-08-23 10:53:58,344 - octoprint.plugins.excluderegion - INFO - Setting update detected: g90InfluencesExtruder=False, clearRegionsAfterPrintFinishes=False, mayShrinkRegionsWhilePrinting=False, loggingMode=octoprint, enteringExcludedRegionGcode=None, exitingExcludedRegionGcode=None, extendedExcludeGcodes={'G4': {"gcode": "G4", "mode": "exclude", "description": "Ignore all dwell commands in an excluded area to reduce delays while excluding", "type": "ExcludedGcode"}, 'M117': {"gcode": "M117", "mode": "last", "description": "Suppress display messages while excluding and output the last message encountered when exiting the excluded area", "type": "ExcludedGcode"}, 'M204': {"gcode": "M204", "mode": "merge", "description": "Record default acceleration changes while excluding and apply the most recent values in a single command after exiting the excluded area", "type": "ExcludedGcode"}, 'M205': {"gcode": "M205", "mode": "merge", "description": "Record advanced setting changes while excluding and apply the most recent values in a single command after exiting the excluded area", "type": "ExcludedGcode"}, 'M73': {"gcode": "M73", "mode": "merge", "description": "Suppress progress updates while excluding and output the most recent progress values encountered when exiting the excluded area", "type": "ExcludedGcode"}}, atCommandActions={'ExcludeRegion': [{"command": "ExcludeRegion", "parameterPattern": "^\\s*(enable|on)(\\s|$)", "action": "enable_exclusion", "description": "Default action to enable exclusion", "type": "AtCommandAction"}, {"command": "ExcludeRegion", "parameterPattern": "^\\s*(disable|off)(\\s|$)", "action": "disable_exclusion", "description": "Default action to disable exclusion", "type": "AtCommandAction"}]}
2023-08-23 10:53:58,380 - octoprint.plugins.cancelobject - INFO - No beforegcode defined
2023-08-23 10:53:58,381 - octoprint.plugins.cancelobject - INFO - No aftergcode defined
2023-08-23 10:53:58,406 - octoprint.plugins.eeprom_marlin - INFO - EEPROM Data initialised
2023-08-23 10:53:58,409 - octoprint.plugins.eeprom_marlin - INFO - Backup metadata initialised
2023-08-23 10:53:58,409 - octoprint.plugins.eeprom_marlin - INFO - All EEPROM editor modules loaded
2023-08-23 10:53:58,443 - octoprint.plugin.core - INFO - Initialized 46 plugin implementation(s)
2023-08-23 10:53:58,572 - octoprint - INFO - Installing webcam compat overlay for configured default webcam <octoprint.webcams.ProvidedWebcam object at 0xab675da8>
2023-08-23 10:53:58,576 - octoprint.plugin.core - INFO - 47 plugin(s) registered with the system:
|  ABL Expert Plugin (0.6) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_ABL_Expert
|  Action Command Notification Support (bundled) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_notification
|  Action Command Prompt Support (bundled) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugins/action_command_prompt
|  Announcement Plugin (bundled) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugins/announcements
|  Anonymous Usage Tracking (bundled) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugins/tracking
|  Application Keys Plugin (bundled) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugins/appkeys
|  Backup & Restore (bundled) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugins/backup
|  Bed Visualizer (1.1.1) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_bedlevelvisualizer
|  Camera Settings (0.4.3) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_CameraSettings
|  Cancel Objects (0.4.7) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_cancelobject
|  Classic Webcam (bundled) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugins/classicwebcam
|  Core Wizard (bundled) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugins/corewizard
|  Creality Temperature (1.2.4) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_CrealityTemperature
|  Detailed Progress (0.2.7) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_detailedprogress
|  Discovery (bundled) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugins/discovery
|  DisplayProgress (0.1.3) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_displayprogress
|  Error Tracking (bundled) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugins/errortracking
|  Event Manager (bundled) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugins/eventmanager
|  Exclude Region (0.3.2) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_excluderegion
|  File Check (2021.2.23) (bundled) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_file_check
|  Firmware Check (2021.10.11) (bundled) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_firmware_check
|  Firmware Updater (1.14.0) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_firmwareupdater
|  GCode Viewer (bundled) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugins/gcodeviewer
|  HomeAssistant Discovery (3.7.0) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_homeassistant
|  Logging (bundled) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugins/logging
|  M73 Progress Plugin (0.2.1) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_m73progress
|  Marlin EEPROM Editor (3.3.0) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_eeprom_marlin
|  Navbar Temperature Plugin (0.15) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_navbartemp
| !Obico for OctoPrint (2.4.4) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_obico
|  OctoApp (1.3.2) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_octoapp
|  OctoEverywhere! (2.7.6) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_octoeverywhere
|  Octolapse (0.4.3) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_octolapse
|  Octoprint Display ETA (2.2.0) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_display_eta
|  Pi Support Plugin (2023.7.31) (bundled) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_pi_support
|  Plugin Manager (bundled) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugins/pluginmanager
|  PrettyGCode (1.2.4) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_prettygcode
|  Print History Plugin (1.4.1) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_printhistory
|  Printer Stats (3.1.4) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_stats
|  PrintTimeGenius Plugin (2.3.1) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_PrintTimeGenius
|  PSU Control (1.0.6) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_psucontrol
|  PSU Control - Home Assistant (1.0.5) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_psucontrol_homeassistant
|  Slicer Thumbnails (1.0.2) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_prusaslicerthumbnails
|  Software Update (bundled) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugins/softwareupdate
|  Tab Order (0.5.12) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_taborder
|  Themeify (1.2.2) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_themeify
|  Virtual Printer (bundled) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugins/virtual_printer
|  Z Probe Offset (0.5) = /home/jonas/oprint/lib/python3.9/site-packages/octoprint_z_probe_offset
Prefix legend: ! = disabled, # = blacklisted, * = incompatible
2023-08-23 10:53:58,615 - octoprint.environment - INFO - Detected environment is Python 3.9.2 under Linux (linux). Details:
|  hardware:
|    cores: 4
|    freq: 1500.0
|    ram: 1908686848
|  os:
|    bits: 32
|    id: linux
|    platform: linux
|  plugins:
|    pi_support:
|      model: Raspberry Pi 4 Model B Rev 1.1
|      octopi_version: 1.0.0
|      octopiuptodate_build: 1.0.0-1.9.2-20230718111854
|      octopiuptodate_build_short: 2023.07.18.111854
|      throttle_check_enabled: true
|      throttle_check_functional: true
|      throttle_state: '0x0'
|  python:
|    pip: '22.3'
|    version: 3.9.2
|    virtualenv: /home/jonas/oprint
2023-08-23 10:53:58,641 - octoprint.server - INFO - Reset webasset folder /home/jonas/.octoprint/generated/webassets...
2023-08-23 10:53:58,642 - octoprint.server - INFO - Reset webasset folder /home/jonas/.octoprint/generated/.webassets-cache...
2023-08-23 10:53:58,642 - octoprint.server - INFO - Reset webasset folder /home/jonas/.octoprint/generated/.webassets-manifest.json...
2023-08-23 10:53:58,833 - octoprint.plugins.bedlevelvisualizer - WARNING - The Blueprint of this plugin is relying on the default implementation of is_blueprint_csrf_protected (newly added in OctoPrint 1.8.3), which in a future version will be switched from False to True for security reasons. Plugin authors should ensure they explicitly declare the CSRF protection status in their BlueprintPlugin mixin implementation. Recommendation is to enable CSRF protection and exempt views that must not use it with the octoprint.plugin.BlueprintPlugin.csrf_exempt decorator.
2023-08-23 10:53:58,833 - octoprint.server - WARNING - CSRF Protection for Blueprint of plugin bedlevelvisualizer is DISABLED
2023-08-23 10:53:58,842 - octoprint.plugins.octolapse - WARNING - The Blueprint of this plugin is relying on the default implementation of is_blueprint_csrf_protected (newly added in OctoPrint 1.8.3), which in a future version will be switched from False to True for security reasons. Plugin authors should ensure they explicitly declare the CSRF protection status in their BlueprintPlugin mixin implementation. Recommendation is to enable CSRF protection and exempt views that must not use it with the octoprint.plugin.BlueprintPlugin.csrf_exempt decorator.
2023-08-23 10:53:58,842 - octoprint.server - WARNING - CSRF Protection for Blueprint of plugin octolapse is DISABLED
2023-08-23 10:53:58,844 - octoprint.plugins.printhistory - WARNING - The Blueprint of this plugin is relying on the default implementation of is_blueprint_csrf_protected (newly added in OctoPrint 1.8.3), which in a future version will be switched from False to True for security reasons. Plugin authors should ensure they explicitly declare the CSRF protection status in their BlueprintPlugin mixin implementation. Recommendation is to enable CSRF protection and exempt views that must not use it with the octoprint.plugin.BlueprintPlugin.csrf_exempt decorator.
2023-08-23 10:53:58,845 - octoprint.server - WARNING - CSRF Protection for Blueprint of plugin printhistory is DISABLED
2023-08-23 10:53:59,282 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:53:59,299 - octoprint.plugins.firmwareupdater - INFO - Setting maximum upload size for /flash to 5243904
2023-08-23 10:53:59,300 - octoprint.server - INFO - Shutting down intermediary server...
2023-08-23 10:53:59,464 - octoprint.server - INFO - Intermediary server shut down
2023-08-23 10:53:59,469 - octoprint.events - INFO - Processing startup event, this is our first event
2023-08-23 10:53:59,469 - octoprint.events - INFO - Adding 1 events to queue that were held back before startup event
2023-08-23 10:53:59,474 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue...
2023-08-23 10:53:59,475 - octoprint.server - INFO - Autoconnect on startup is configured, trying to connect to the printer...
2023-08-23 10:53:59,482 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue
2023-08-23 10:53:59,515 - octoprint.server - INFO - Trying to connect to configured serial port None
2023-08-23 10:53:59,664 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection"
2023-08-23 10:53:59,672 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 1 port/baudrate candidates: /dev/ttyUSB0@115200
2023-08-23 10:53:59,672 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200
2023-08-23 10:53:59,676 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200
2023-08-23 10:53:59,688 - octoprint.server - INFO - Starting autorefresh of serial port list
2023-08-23 10:53:59,692 - octoprint.server - INFO - Autorefresh of serial port list stopped
2023-08-23 10:53:59,696 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder...
2023-08-23 10:53:59,702 - octoprint.server.util.watchdog - INFO - ... initial scan done.
2023-08-23 10:53:59,732 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s
2023-08-23 10:53:59,736 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2023-08-23 10:53:59,744 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Operational"
2023-08-23 10:53:59,753 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2023-08-23 10:53:59,771 - octoprint.plugins.firmwareupdater - INFO - Got CONNECTED event
2023-08-23 10:53:59,774 - octoprint.plugins.firmwareupdater - INFO - Run postflash flag is not set
2023-08-23 10:53:59,775 - octoprint.plugins.stats - INFO - Printer Stats - on_event
2023-08-23 10:53:59,834 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin abl10x10-v006-byTT (Aug 15 2023 13:10:26)"
2023-08-23 10:53:59,849 - octoprint.plugins.firmwareupdater - INFO - Setting BINARY_FILE_TRANSFER capability to False
2023-08-23 10:53:59,853 - octoprint.plugins.ABL_Expert - INFO - self.printer_cap[eeprom] is now 1

2023-08-23 10:53:59,855 - octoprint.plugins.z_probe_offset - INFO - Printer_cap[eeprom]:1
2023-08-23 10:53:59,874 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting
2023-08-23 10:53:59,886 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:53:59,887 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:53:59,897 - octoprint.plugins.ABL_Expert - INFO - self.printer_cap[autolevel] is now 1

2023-08-23 10:53:59,903 - octoprint.plugins.ABL_Expert - INFO - self.printer_cap[z_probe] is now 1

2023-08-23 10:53:59,903 - octoprint.plugins.z_probe_offset - INFO - Printer_cap[z_probe]:1
2023-08-23 10:53:59,907 - octoprint.plugins.ABL_Expert - INFO - self.printer_cap[leveling_data] is now 1

2023-08-23 10:53:59,931 - octoprint.util.comm - INFO - Firmware states that it supports emergency GCODEs to be sent without waiting for an acknowledgement first
2023-08-23 10:53:59,960 - octoprint.util.comm - INFO - Firmware states that it supports long filenames
2023-08-23 10:54:00,134 - octoprint.plugins.z_probe_offset - INFO - Z probe offset is now -3.05
2023-08-23 10:54:00,138 - octoprint.plugins.eeprom_marlin - INFO - M503 detected, collecting data
2023-08-23 10:54:00,199 - octoprint.plugins.eeprom_marlin - WARNING - EEPROM output line not recognized, skipped
2023-08-23 10:54:00,199 - octoprint.plugins.eeprom_marlin - WARNING - Line: echo:  M149 C ; Units in Celsius
2023-08-23 10:54:00,264 - octoprint.plugins.eeprom_marlin - WARNING - EEPROM output line not recognized, skipped
2023-08-23 10:54:00,264 - octoprint.plugins.eeprom_marlin - WARNING - Line: echo:  M221 S100
2023-08-23 10:54:00,568 - octoprint.plugins.eeprom_marlin - WARNING - EEPROM output line not recognized, skipped
2023-08-23 10:54:00,568 - octoprint.plugins.eeprom_marlin - WARNING - Line: echo:  M413 S1 ; ON
2023-08-23 10:54:00,574 - octoprint.plugins.z_probe_offset - INFO - Z probe offset is now -3.05
2023-08-23 10:54:00,616 - octoprint.plugins.eeprom_marlin - INFO - Finished data collection, updating UI
2023-08-23 10:54:00,636 - octoprint.plugins.ABL_Expert - INFO - Grid mesh size is 10
2023-08-23 10:54:00,753 - octoprint.plugins.z_probe_offset - INFO - Z probe offset is now -3.05
2023-08-23 10:54:19,364 - octoprint.plugins.PrintTimeGenius - INFO - New printer config: M200 S0 D1.75
M92 X79.50 Y79.50 Z400.00 E424.90
M203 X1000.00 Y1000.00 Z10.00 E50.00
M201 X1000.00 Y1000.00 Z100.00 E1000.00
M204 P1000.00 R1000.00 T1500.00
M205 B50000.00 E5.00 S0.00 T0.00 X12.00 Y12.00 Z0.40
M221 T0 S100
M900 K0.05
2023-08-23 10:54:20,742 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance "S1 Plus"._http._tcp.local.' for _http._tcp.local.
2023-08-23 10:54:21,579 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance "S1 Plus"._octoprint._tcp.local.' for _octoprint._tcp.local.
2023-08-23 10:54:21,596 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance "S1 Plus" for SSDP
2023-08-23 10:54:21,681 - octoprint.plugins.octoeverywhere - INFO - OctoPrint host:127.0.0.1 port:5000
2023-08-23 10:54:21,693 - octoprint.plugins.octoeverywhere - INFO - OctoPingPong stats loaded from file.
2023-08-23 10:54:21,697 - octoprint.plugins.octoeverywhere - INFO - mDns Cache file loaded. Cached Entries Found: 0
2023-08-23 10:54:21,702 - octoprint.plugins.psucontrol - INFO - Registered plugin - psucontrol_homeassistant
2023-08-23 10:54:21,705 - octoprint.server - INFO - Listening on http://127.0.0.1:5000
2023-08-23 10:54:21,773 - octoprint.plugins.octoeverywhere - INFO - IPV4 - starport:142.93.161.88 main:172.67.223.103
2023-08-23 10:54:21,784 - octoprint.plugins.octoeverywhere - INFO - Failed to resolve host ipv6 name [Errno -2] Name or service not known
2023-08-23 10:54:21,824 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid
2023-08-23 10:54:22,910 - octoprint.util.pip - INFO - Using "/home/jonas/oprint/bin/python -m pip" as command to invoke pip
2023-08-23 10:54:22,917 - octoprint.util.pip - INFO - pip installs to /home/jonas/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes
2023-08-23 10:54:22,935 - octoprint.util.pip - INFO - ==> pip ok -> yes
2023-08-23 10:54:22,990 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 3.2GB. That is considered sufficient for updating.
2023-08-23 10:54:22,990 - octoprint.plugins.softwareupdate - INFO - Not fetching check overlays, we are offline
2023-08-23 10:54:23,255 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity changed from offline to online
2023-08-23 10:54:23,457 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid
2023-08-23 10:54:24,902 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid
2023-08-23 10:54:25,485 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid
2023-08-23 10:54:26,820 - octoprint.util.pip - INFO - Using "/home/jonas/oprint/bin/python -m pip" as command to invoke pip
2023-08-23 10:54:26,827 - octoprint.util.pip - INFO - pip installs to /home/jonas/oprint/lib/python3.9/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes
2023-08-23 10:54:26,827 - octoprint.util.pip - INFO - ==> pip ok -> yes
2023-08-23 10:54:27,692 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk
2023-08-23 10:54:27,709 - octoprint.plugins.bedlevelvisualizer - INFO - OctoPrint-BedLevelVisualizer loaded!
2023-08-23 10:54:27,711 - octoprint.plugins.detailedprogress - INFO - OctoPrint-DetailedProgress loaded!
2023-08-23 10:54:27,721 - octoprint.plugins.homeassistant - INFO - PSUControl helpers found
2023-08-23 10:54:27,722 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:54:27,738 - octoprint.plugin - ERROR - Error while calling plugin homeassistant
Traceback (most recent call last):
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugin/__init__.py", line 275, in call_plugin
    result = getattr(plugin, method)(*args, **kwargs)
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/util/__init__.py", line 1686, in wrapper
    return f(*args, **kwargs)
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint_homeassistant/__init__.py", line 179, in on_after_startup
    self._generate_device_registration()
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint_homeassistant/__init__.py", line 262, in _generate_device_registration
    self._generate_sensor(
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint_homeassistant/__init__.py", line 610, in _generate_sensor
    self.mqtt_publish(topic, payload, allow_queueing=True)
TypeError: 'NoneType' object is not callable
2023-08-23 10:54:27,842 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 19, 'printer_state': 'OPERATIONAL'}
2023-08-23 10:54:27,869 - octoprint.server.util.flask - INFO - Passively logging in user jonas from ::ffff:192.168.178.21
2023-08-23 10:54:27,870 - octoprint.access.users - INFO - Logged in user: jonas
2023-08-23 10:54:27,992 - octoprint.plugins.tracking - INFO - Sent tracking event pong, payload: {'version': '1.9.2', 'os': 'linux', 'bits': 32, 'python': '3.9.2', 'pip': '22.3', 'cores': 4, 'freq': 1500.0, 'ram': 1908686848, 'pi_model': 'Raspberry Pi 4 Model B Rev 1.1', 'octopi_version': '1.0.0', 'octopiuptodate_build': '1.0.0-1.9.2-20230718111854', 'plugins': 'z_probe_offset:0.5,themeify:1.2.2,prusaslicerthumbnails:1.0.2,taborder:0.5.12,stats:3.1.4,psucontrol:1.0.6,psucontrol_homeassistant:1.0.5,printtimegenius:2.3.1,printhistory:1.4.1,prettygcode:1.2.4,navbartemp:0.15,homeassistant:3.7.0,firmwareupdater:1.14.0,excluderegion:0.3.2,displayprogress:0.1.3,display_eta:2.2.0,detailedprogress:0.2.7,crealitytemperature:1.2.4,cancelobject:0.4.7,camerasettings:0.4.3,octolapse:0.4.3,octoeverywhere:2.7.6,octoapp:1.3.2,eeprom_marlin:3.3.0,m73progress:0.2.1,bedlevelvisualizer:1.1.1,abl_expert:0.6'}
2023-08-23 10:54:28,135 - octoprint.plugins.tracking - INFO - Sent tracking event startup, payload: {'version': '1.9.2', 'os': 'linux', 'bits': 32, 'python': '3.9.2', 'pip': '22.3', 'cores': 4, 'freq': 1500.0, 'ram': 1908686848, 'pi_model': 'Raspberry Pi 4 Model B Rev 1.1', 'octopi_version': '1.0.0', 'octopiuptodate_build': '1.0.0-1.9.2-20230718111854'}
2023-08-23 10:54:28,782 - octoprint.plugins.octoeverywhere - INFO - After startup called. Starting worker thread.
2023-08-23 10:54:28,793 - octoprint.plugins.octoeverywhere - INFO - Main thread starting
2023-08-23 10:54:28,840 - octoprint.plugins.octoeverywhere - INFO - Frontend http port detected as 80, is https? False
2023-08-23 10:54:28,845 - octoprint.plugins.prettygcode - INFO - Pretty GCode.
2023-08-23 10:54:28,851 - octoprint.plugins.octoeverywhere - INFO - Attempting to use lowest latency server: wss://fra.octoeverywhere.com/octoclientws
2023-08-23 10:54:28,851 - octoprint.plugins.octoeverywhere - INFO - Attempting to talk to OctoEverywhere, server con wss://fra.octoeverywhere.com/octoclientws[1] wsId:2657911448
2023-08-23 10:54:28,879 - octoprint.plugins.stats - INFO - Printer Stats
2023-08-23 10:54:28,885 - octoprint.plugins.themeify - INFO - Themeify initialized.
2023-08-23 10:54:29,019 - octoprint.plugins.octoeverywhere - INFO - Connected To OctoEverywhere, server con wss://fra.octoeverywhere.com/octoclientws[1]. Starting handshake...
2023-08-23 10:54:29,405 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'http://192.168.178.179/', 'path': '/', 'query_string': 'l10n=en'}
2023-08-23 10:54:29,613 - octoprint.plugins.octoeverywhere - INFO - Handshake complete, server con wss://fra.octoeverywhere.com/octoclientws[1], successfully connected to OctoEverywhere!
2023-08-23 10:54:32,546 - octoprint.server.views - ERROR - Error while retrieving template data for plugin homeassistant, ignoring it
Traceback (most recent call last):
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/server/views.py", line 1271, in fetch_template_data
    wizard_required = implementation.is_wizard_required()
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/util/__init__.py", line 1686, in wrapper
    return f(*args, **kwargs)
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint_homeassistant/__init__.py", line 1197, in is_wizard_required
    _retain = settings().get_boolean(
AttributeError: 'Settings' object has no attribute 'get_boolean'
2023-08-23 10:54:32,554 - octoprint.server.views - ERROR - Error while retrieving template data for plugin homeassistant, ignoring it
Traceback (most recent call last):
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/server/views.py", line 1271, in fetch_template_data
    wizard_required = implementation.is_wizard_required()
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/util/__init__.py", line 1686, in wrapper
    return f(*args, **kwargs)
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint_homeassistant/__init__.py", line 1197, in is_wizard_required
    _retain = settings().get_boolean(
AttributeError: 'Settings' object has no attribute 'get_boolean'
2023-08-23 10:54:33,944 - octoprint.server.util.flask - INFO - Passively logging in user jonas from 127.0.0.1
2023-08-23 10:54:33,944 - octoprint.access.users - INFO - Logged in user: jonas
2023-08-23 10:54:46,027 - octoprint.util.jinja - WARNING - Loading plugin template '/webcams/mjpg_streamer/logitech_c920.jinja2' from '/home/jonas/oprint/lib/python3.9/site-packages/octoprint_octolapse/templates/webcams/mjpg_streamer/logitech_c920.jinja2' without plugin prefix, this is deprecated and will soon no longer be supported.
2023-08-23 10:54:46,034 - octoprint.util.jinja - WARNING - Loading plugin template '/webcams/mjpg_streamer/logitech_c920.jinja2' from '/home/jonas/oprint/lib/python3.9/site-packages/octoprint_octolapse/templates/webcams/mjpg_streamer/logitech_c920.jinja2' without plugin prefix, this is deprecated and will soon no longer be supported.
2023-08-23 10:54:46,052 - octoprint.util.jinja - WARNING - Loading plugin template '/webcams/mjpg_streamer/raspi_cam_v2.jinja2' from '/home/jonas/oprint/lib/python3.9/site-packages/octoprint_octolapse/templates/webcams/mjpg_streamer/raspi_cam_v2.jinja2' without plugin prefix, this is deprecated and will soon no longer be supported.
2023-08-23 10:54:46,068 - octoprint.util.jinja - WARNING - Loading plugin template '/webcams/mjpg_streamer/raspi_cam_v2.jinja2' from '/home/jonas/oprint/lib/python3.9/site-packages/octoprint_octolapse/templates/webcams/mjpg_streamer/raspi_cam_v2.jinja2' without plugin prefix, this is deprecated and will soon no longer be supported.
2023-08-23 10:54:46,083 - octoprint.util.jinja - WARNING - Loading plugin template '/webcams/mjpg_streamer/logitech_c250.jinja2' from '/home/jonas/oprint/lib/python3.9/site-packages/octoprint_octolapse/templates/webcams/mjpg_streamer/logitech_c250.jinja2' without plugin prefix, this is deprecated and will soon no longer be supported.
2023-08-23 10:54:46,093 - octoprint.util.jinja - WARNING - Loading plugin template '/webcams/mjpg_streamer/logitech_c250.jinja2' from '/home/jonas/oprint/lib/python3.9/site-packages/octoprint_octolapse/templates/webcams/mjpg_streamer/logitech_c250.jinja2' without plugin prefix, this is deprecated and will soon no longer be supported.
2023-08-23 10:54:54,236 - octoprint.server.preemptive_cache - INFO - ... done in 24.83s
2023-08-23 10:54:54,236 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'https://127.0.0.1:5000/', 'path': '/', 'query_string': 'l10n=en'}
2023-08-23 10:54:57,885 - octoprint.server.views - ERROR - Error while retrieving template data for plugin homeassistant, ignoring it
Traceback (most recent call last):
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/server/views.py", line 1271, in fetch_template_data
    wizard_required = implementation.is_wizard_required()
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/util/__init__.py", line 1686, in wrapper
    return f(*args, **kwargs)
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint_homeassistant/__init__.py", line 1197, in is_wizard_required
    _retain = settings().get_boolean(
AttributeError: 'Settings' object has no attribute 'get_boolean'
2023-08-23 10:54:59,043 - octoprint.plugins.octoeverywhere - INFO - Slipstream took 30.24125599861145 to fully update the cache
2023-08-23 10:54:59,971 - octoprint.server.preemptive_cache - INFO - ... done in 5.73s
2023-08-23 10:54:59,971 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'https://s1plus.octoeverywhere.com/', 'path': '/', 'query_string': 'l10n=en'}
2023-08-23 10:55:01,069 - octoprint.server.views - ERROR - Error while retrieving template data for plugin homeassistant, ignoring it
Traceback (most recent call last):
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/server/views.py", line 1271, in fetch_template_data
    wizard_required = implementation.is_wizard_required()
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/util/__init__.py", line 1686, in wrapper
    return f(*args, **kwargs)
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint_homeassistant/__init__.py", line 1197, in is_wizard_required
    _retain = settings().get_boolean(
AttributeError: 'Settings' object has no attribute 'get_boolean'
2023-08-23 10:55:03,093 - octoprint.server.preemptive_cache - INFO - ... done in 3.12s
2023-08-23 10:55:24,176 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.178.21
2023-08-23 10:55:24,269 - octoprint.server.util.flask - INFO - Passively logging in user jonas from ::ffff:192.168.178.21
2023-08-23 10:55:24,270 - octoprint.access.users - INFO - Logged in user: jonas
2023-08-23 10:55:27,115 - octoprint.server.util.sockjs - INFO - User jonas logged in on the socket from client ::ffff:192.168.178.21
2023-08-23 10:55:31,762 - octoprint.printer.standard.job - INFO - Print job selected - origin: local, path: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 10.0% ext1 200C bed 60C.gcode, owner: jonas, user: jonas
2023-08-23 10:55:32,348 - octoprint.plugins.excluderegion - INFO - File selected, resetting internal state
2023-08-23 10:55:36,560 - octoprint.util.comm - INFO - Starting job on behalf of user jonas
2023-08-23 10:55:36,562 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting"
2023-08-23 10:55:36,568 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 10.0% ext1 200C bed 60C.gcode, owner: jonas, user: jonas
2023-08-23 10:55:36,736 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid
2023-08-23 10:55:37,076 - octoprint.plugins.tracking - INFO - Sent tracking event print_started, payload: {'origin': 'local', 'file': '6053e8993425920cd500f710e7f6534e24d2494a'}
2023-08-23 10:55:39,149 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid
2023-08-23 10:55:39,493 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2023-08-23 10:55:39,540 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Printing"
2023-08-23 10:55:39,666 - octoprint.plugins.detailedprogress - INFO - Printing started. Detailed progress started.
2023-08-23 10:55:39,683 - octoprint.plugins.excluderegion - INFO - Printing started
2023-08-23 10:55:39,685 - octoprint.plugin - ERROR - Error while calling plugin homeassistant
Traceback (most recent call last):
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugin/__init__.py", line 275, in call_plugin
    result = getattr(plugin, method)(*args, **kwargs)
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/util/__init__.py", line 1686, in wrapper
    return f(*args, **kwargs)
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint_homeassistant/__init__.py", line 1115, in on_event
    self.mqtt_publish(
TypeError: 'NoneType' object is not callable
2023-08-23 10:55:39,696 - octoprint.plugins.action_command_notification - INFO - Got a notification: Bed Heating...
2023-08-23 10:55:39,697 - octoprint.plugins.octoeverywhere - INFO - Gadget is now watching!
2023-08-23 10:55:39,703 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:55:39,704 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:55:39,707 - octoprint.plugins.octoeverywhere - INFO - New print started; PrintId: Ng9G5RHgobuVnedMguy0Y1tj0KyaMxRib0xATDiagVFUGxjurOCLkKBX29cT file:CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 10.0% ext1 200C bed 60C.gcode size:3997.09765625 filament:11568
2023-08-23 10:55:39,708 - octoprint.plugins.stats - INFO - Printer Stats - on_event
2023-08-23 10:55:39,855 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:55:39,856 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:55:39,991 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:55:39,992 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:55:40,068 - octoprint.plugins.action_command_notification - INFO - Got a notification: E1 Heating...
2023-08-23 10:55:40,108 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:55:40,109 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:55:40,167 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:55:40,170 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:55:40,655 - octoprint.plugins.octoeverywhere - INFO - NotificationsHandler successfully sent 'started'
2023-08-23 10:55:42,160 - octoprint.util.comm - INFO - Printer seems to support the busy protocol, will adjust timeouts and set busy interval accordingly
2023-08-23 10:55:49,675 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 10.0% ext1 200C bed 60C.gcode
2023-08-23 10:55:57,016 - octoprint.util.comm - INFO - Telling the printer to set the busy interval to our "communicationBusy" timeout - 1s = 2s
2023-08-23 10:55:57,420 - octoprint.plugins.action_command_notification - INFO - Got a notification: Bed Heating...
2023-08-23 10:55:57,424 - octoprint.plugins.action_command_notification - INFO - Got a notification: Ender-3 S1 Plus Ready.
2023-08-23 10:55:59,677 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 10.0% ext1 200C bed 60C.gcode
2023-08-23 10:56:09,679 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 10.0% ext1 200C bed 60C.gcode
2023-08-23 10:56:09,700 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:56:09,703 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:56:09,944 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:56:09,945 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:56:10,044 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:56:10,045 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:56:10,098 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:56:10,100 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:56:10,178 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:56:10,179 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:56:10,924 - octoprint.plugins.octoeverywhere - INFO - Gadget HostLock set to: gadget-ams.octoeverywhere.com
2023-08-23 10:56:19,682 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 10.0% ext1 200C bed 60C.gcode
2023-08-23 10:56:29,685 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 10.0% ext1 200C bed 60C.gcode
2023-08-23 10:56:30,932 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:56:30,935 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:56:31,147 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:56:31,149 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:56:31,270 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:56:31,271 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:56:31,331 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:56:31,332 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:56:31,383 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:56:31,384 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:56:39,687 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 10.0% ext1 200C bed 60C.gcode
2023-08-23 10:56:49,688 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 10.0% ext1 200C bed 60C.gcode
2023-08-23 10:56:52,240 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:56:52,241 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:56:52,346 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:56:52,347 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:56:52,452 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:56:52,453 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:56:52,507 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:56:52,508 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:56:52,560 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:56:52,561 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:56:59,690 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 10.0% ext1 200C bed 60C.gcode
2023-08-23 10:57:09,692 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 10.0% ext1 200C bed 60C.gcode
2023-08-23 10:57:13,090 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:57:13,093 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:57:13,251 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:57:13,252 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:57:13,354 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:57:13,355 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:57:13,407 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:57:13,408 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:57:13,468 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:57:13,470 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:57:19,694 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 10.0% ext1 200C bed 60C.gcode
2023-08-23 10:57:29,697 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 10.0% ext1 200C bed 60C.gcode
2023-08-23 10:57:34,126 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:57:34,128 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:57:34,248 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:57:34,249 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:57:34,347 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:57:34,348 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:57:34,399 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:57:34,400 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:57:34,455 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:57:34,456 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:57:39,710 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 10.0% ext1 200C bed 60C.gcode
2023-08-23 10:57:49,713 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 10.0% ext1 200C bed 60C.gcode
2023-08-23 10:57:55,001 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:57:55,004 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:57:55,261 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:57:55,262 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:57:55,374 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:57:55,375 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:57:55,427 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:57:55,429 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:57:55,486 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:57:55,487 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:57:59,726 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 10.0% ext1 200C bed 60C.gcode
2023-08-23 10:58:09,740 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 10.0% ext1 200C bed 60C.gcode
2023-08-23 10:58:16,067 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:58:16,069 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:58:16,252 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:58:16,253 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:58:16,355 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:58:16,356 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:58:16,411 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:58:16,412 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:58:16,474 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:58:16,475 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:58:19,746 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 10.0% ext1 200C bed 60C.gcode
2023-08-23 10:58:29,748 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 10.0% ext1 200C bed 60C.gcode
2023-08-23 10:58:37,172 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:58:37,173 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:58:37,261 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:58:37,263 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:58:37,376 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:58:37,378 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:58:37,430 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:58:37,432 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:58:37,487 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:58:37,488 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:58:39,749 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 10.0% ext1 200C bed 60C.gcode
2023-08-23 10:58:49,750 - octoprint.plugins.detailedprogress - INFO - Message: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 10.0% ext1 200C bed 60C.gcode
2023-08-23 10:58:51,059 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 19, current line = 20
| Last lines in terminal:
| Recv:  T:200.00 /200.00 (436.00) B:59.33 /60.00 (3440.81) @:42 B@:127
| Recv:  T:200.00 /200.00 (436.00) B:59.34 /60.00 (3440.75) @:42 B@:127 W:7
| Recv: echo:busy: processing
| Recv:  T:200.03 /200.00 (435.81) B:59.52 /60.00 (3437.13) @:41 B@:122 W:6
| Recv:  T:199.98 /200.00 (436.19) B:59.63 /60.00 (3435.13) @:42 B@:115
| Recv:  T:200.01 /200.00 (435.94) B:59.69 /60.00 (3433.88) @:42 B@:109 W:5
| Recv: echo:busy: processing
| Recv:  T:199.99 /200.00 (436.06) B:59.81 /60.00 (3431.63) @:42 B@:104 W:4
| Recv:  T:199.99 /200.00 (436.06) B:59.93 /60.00 (3429.31) @:42 B@:96
| Recv:  T:199.99 /200.00 (436.06) B:59.94 /60.00 (3429.19) @:42 B@:97 W:3
| Recv: echo:busy: processing
| Recv:  T:199.95 /200.00 (436.44) B:60.06 /60.00 (3426.69) @:43 B@:91 W:2
| Recv:  T:199.96 /200.00 (436.37) B:60.14 /60.00 (3425.00) @:43 B@:86
| Recv:  T:199.98 /200.00 (436.19) B:60.15 /60.00 (3424.81) @:42 B@:87 W:1
| Recv: echo:busy: processing
| Recv:  T:199.97 /200.00 (436.25) B:60.20 /60.00 (3423.63) @:42 B@:86 W:0
| Recv: ok N18 P15 B7
| Send: N19 M117 CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 10.0% ext1 200C bed 60C.gcode*14
| Recv: Error:checksum mismatch, Last Line: 18
| Recv: Resend: 19
2023-08-23 10:58:51,103 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 19, current line = 20
| Last lines in terminal:
| Recv:  T:199.98 /200.00 (436.19) B:59.63 /60.00 (3435.13) @:42 B@:115
| Recv:  T:200.01 /200.00 (435.94) B:59.69 /60.00 (3433.88) @:42 B@:109 W:5
| Recv: echo:busy: processing
| Recv:  T:199.99 /200.00 (436.06) B:59.81 /60.00 (3431.63) @:42 B@:104 W:4
| Recv:  T:199.99 /200.00 (436.06) B:59.93 /60.00 (3429.31) @:42 B@:96
| Recv:  T:199.99 /200.00 (436.06) B:59.94 /60.00 (3429.19) @:42 B@:97 W:3
| Recv: echo:busy: processing
| Recv:  T:199.95 /200.00 (436.44) B:60.06 /60.00 (3426.69) @:43 B@:91 W:2
| Recv:  T:199.96 /200.00 (436.37) B:60.14 /60.00 (3425.00) @:43 B@:86
| Recv:  T:199.98 /200.00 (436.19) B:60.15 /60.00 (3424.81) @:42 B@:87 W:1
| Recv: echo:busy: processing
| Recv:  T:199.97 /200.00 (436.25) B:60.20 /60.00 (3423.63) @:42 B@:86 W:0
| Recv: ok N18 P15 B7
| Send: N19 M117 CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 10.0% ext1 200C bed 60C.gcode*14
| Recv: Error:checksum mismatch, Last Line: 18
| Recv: Resend: 19
| Recv: ok
| Send: N19 M117 CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 10.0% ext1 200C bed 60C.gcode*14
| Recv: Error:checksum mismatch, Last Line: 18
| Recv: Resend: 19
2023-08-23 10:58:51,134 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 19, current line = 20
| Last lines in terminal:
| Recv:  T:199.99 /200.00 (436.06) B:59.94 /60.00 (3429.19) @:42 B@:97 W:3
| Recv: echo:busy: processing
| Recv:  T:199.95 /200.00 (436.44) B:60.06 /60.00 (3426.69) @:43 B@:91 W:2
| Recv:  T:199.96 /200.00 (436.37) B:60.14 /60.00 (3425.00) @:43 B@:86
| Recv:  T:199.98 /200.00 (436.19) B:60.15 /60.00 (3424.81) @:42 B@:87 W:1
| Recv: echo:busy: processing
| Recv:  T:199.97 /200.00 (436.25) B:60.20 /60.00 (3423.63) @:42 B@:86 W:0
| Recv: ok N18 P15 B7
| Send: N19 M117 CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 10.0% ext1 200C bed 60C.gcode*14
| Recv: Error:checksum mismatch, Last Line: 18
| Recv: Resend: 19
| Recv: ok
| Send: N19 M117 CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 10.0% ext1 200C bed 60C.gcode*14
| Recv: Error:checksum mismatch, Last Line: 18
| Recv: Resend: 19
| Recv: ok
| Send: N19 M117 CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 10.0% ext1 200C bed 60C.gcode*14
| Recv:  T:200.02 /200.00 (435.87) B:60.29 /60.00 (3421.81) @:41 B@:78
| Recv: Error:checksum mismatch, Last Line: 18
| Recv: Resend: 19
2023-08-23 10:58:51,155 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 19, current line = 20
| Last lines in terminal:
| Recv:  T:199.98 /200.00 (436.19) B:60.15 /60.00 (3424.81) @:42 B@:87 W:1
| Recv: echo:busy: processing
| Recv:  T:199.97 /200.00 (436.25) B:60.20 /60.00 (3423.63) @:42 B@:86 W:0
| Recv: ok N18 P15 B7
| Send: N19 M117 CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 10.0% ext1 200C bed 60C.gcode*14
| Recv: Error:checksum mismatch, Last Line: 18
| Recv: Resend: 19
| Recv: ok
| Send: N19 M117 CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 10.0% ext1 200C bed 60C.gcode*14
| Recv: Error:checksum mismatch, Last Line: 18
| Recv: Resend: 19
| Recv: ok
| Send: N19 M117 CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 10.0% ext1 200C bed 60C.gcode*14
| Recv:  T:200.02 /200.00 (435.87) B:60.29 /60.00 (3421.81) @:41 B@:78
| Recv: Error:checksum mismatch, Last Line: 18
| Recv: Resend: 19
| Recv: ok
| Send: N19 M117 CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 10.0% ext1 200C bed 60C.gcode*14
| Recv: Error:checksum mismatch, Last Line: 18
| Recv: Resend: 19
2023-08-23 10:58:51,175 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 19, current line = 20
| Last lines in terminal:
| Send: N19 M117 CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 10.0% ext1 200C bed 60C.gcode*14
| Recv: Error:checksum mismatch, Last Line: 18
| Recv: Resend: 19
| Recv: ok
| Send: N19 M117 CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 10.0% ext1 200C bed 60C.gcode*14
| Recv: Error:checksum mismatch, Last Line: 18
| Recv: Resend: 19
| Recv: ok
| Send: N19 M117 CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 10.0% ext1 200C bed 60C.gcode*14
| Recv:  T:200.02 /200.00 (435.87) B:60.29 /60.00 (3421.81) @:41 B@:78
| Recv: Error:checksum mismatch, Last Line: 18
| Recv: Resend: 19
| Recv: ok
| Send: N19 M117 CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 10.0% ext1 200C bed 60C.gcode*14
| Recv: Error:checksum mismatch, Last Line: 18
| Recv: Resend: 19
| Recv: ok
| Send: N19 M117 CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 10.0% ext1 200C bed 60C.gcode*14
| Recv: Error:checksum mismatch, Last Line: 18
| Recv: Resend: 19
2023-08-23 10:58:51,308 - octoprint.util.comm - WARNING - Printer keeps requesting line 19 again and again, communication stuck
2023-08-23 10:58:51,308 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Error"
2023-08-23 10:58:51,319 - octoprint.util.comm - INFO - Force-sending M112 to the printer
2023-08-23 10:58:51,403 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error"
2023-08-23 10:58:51,431 - octoprint.plugins.excluderegion - INFO - Printing stopped: event=Error
2023-08-23 10:58:51,432 - octoprint.plugins.octoeverywhere - INFO - Gadget has stopped watching!
2023-08-23 10:58:51,439 - octoprint.plugins.octoeverywhere - INFO - RepeatTimer thread exit
2023-08-23 10:58:51,439 - octoprint.plugins.octoeverywhere - INFO - RepeatTimer thread exit
2023-08-23 10:58:51,440 - octoprint.plugins.octoeverywhere - INFO - RepeatTimer thread exit
2023-08-23 10:58:51,441 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:58:51,447 - octoprint.plugins.stats - INFO - Printer Stats - on_event
2023-08-23 10:58:51,455 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:58:51,551 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:58:51,553 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:58:51,609 - octoprint.plugins.tracking - INFO - Sent tracking event commerror_resend_loop, payload: {'commerror_text': 'Printer keeps requesting line 19 again and again, communication stuck'}
2023-08-23 10:58:51,662 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:58:51,663 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:58:51,735 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:58:51,737 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:58:51,805 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:58:51,806 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:58:51,913 - octoprint.server - INFO - Starting autorefresh of serial port list
2023-08-23 10:58:51,923 - octoprint.server - INFO - Serial port list was updated, refreshing the port list in the frontend
2023-08-23 10:58:51,924 - octoprint.plugins.action_command_notification - INFO - Notifications cleared
2023-08-23 10:58:51,925 - octoprint.util.comm - INFO - Firmware didn't send an 'ok' with their resend request. That's a known bug with some firmware variants out there. Simulating an ok to continue...
2023-08-23 10:58:51,934 - octoprint.plugins.stats - INFO - Printer Stats - on_event
2023-08-23 10:58:51,936 - octoprint.plugin - ERROR - Error while calling plugin stats
Traceback (most recent call last):
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugin/__init__.py", line 275, in call_plugin
    result = getattr(plugin, method)(*args, **kwargs)
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/util/__init__.py", line 1686, in wrapper
    return f(*args, **kwargs)
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint_stats/__init__.py", line 801, in on_event
    if "owner" not in payload:
TypeError: argument of type 'NoneType' is not iterable
2023-08-23 10:58:51,946 - octoprint.plugins.printhistory - INFO - fileData not found
2023-08-23 10:58:52,007 - octoprint.plugins.detailedprogress - INFO - Printing stopped. Detailed progress stopped.
2023-08-23 10:58:52,018 - octoprint.plugins.excluderegion - INFO - Printing stopped: event=PrintFailed
2023-08-23 10:58:52,024 - octoprint.plugin - ERROR - Error while calling plugin homeassistant
Traceback (most recent call last):
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/plugin/__init__.py", line 275, in call_plugin
    result = getattr(plugin, method)(*args, **kwargs)
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint/util/__init__.py", line 1686, in wrapper
    return f(*args, **kwargs)
  File "/home/jonas/oprint/lib/python3.9/site-packages/octoprint_homeassistant/__init__.py", line 1129, in on_event
    self.mqtt_publish(
TypeError: 'NoneType' object is not callable
2023-08-23 10:58:52,031 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:58:52,037 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:58:52,041 - octoprint.plugins.printhistory - INFO - Name: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 10.0% ext1 200C bed 60C.gcode
2023-08-23 10:58:52,041 - octoprint.plugins.printhistory - INFO - Origin: local
2023-08-23 10:58:52,042 - octoprint.plugins.printhistory - INFO - Path: CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 10.0% ext1 200C bed 60C.gcode
2023-08-23 10:58:52,082 - octoprint.plugins.printhistory - INFO - Path_On_disk: /home/jonas/.octoprint/uploads/CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 10.0% ext1 200C bed 60C.gcode
2023-08-23 10:58:52,084 - octoprint.plugins.printhistory - INFO - Got metadata from name
2023-08-23 10:58:52,100 - octoprint.plugins.printhistory - INFO - found fileData
2023-08-23 10:58:52,159 - octoprint.plugins.printhistory - INFO - Can't parse additional parameters from /home/jonas/.octoprint/uploads/CE3S1P Schrauben (2) Generic PLA lw 0.6mm lh 0.28mm if 10.0% ext1 200C bed 60C.gcode
2023-08-23 10:58:52,160 - octoprint.plugins.printhistory - INFO - {}
2023-08-23 10:58:52,161 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:58:52,162 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:58:52,200 - octoprint.plugins.tracking - INFO - Sent tracking event print_failed, payload: {'origin': 'local', 'file': '6053e8993425920cd500f710e7f6534e24d2494a', 'elapsed': 194, 'reason': 'error', 'commerror_text': 'Printer keeps requesting line 19 again and again, communication stuck'}
2023-08-23 10:58:52,294 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:58:52,296 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:58:52,362 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:58:52,364 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:58:52,437 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'snapshot'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:58:52,439 - octoprint.settings - WARNING - DeprecationWarning: Detected access to deprecated settings path ['webcam', 'stream'], returned value is derived from compatibility overlay. Please use the webcam system introduced with 1.9.0, this compatibility layer will be removed in a future release.
2023-08-23 10:58:52,516 - octoprint.plugins.octoeverywhere - INFO - NotificationsHandler successfully sent 'error'
2023-08-23 10:58:54,084 - octoprint.plugins.stats - INFO - Printer Stats - on_event
2023-08-23 10:58:54,359 - octoprint.plugins.octoeverywhere - INFO - NotificationsHandler successfully sent 'failed'
2023-08-23 10:58:59,737 - octoprint.plugins.camerasettings - INFO - Excluding camera bcm2835-isp-capture0 based on ^bcm2835-isp-\w+$
2023-08-23 10:58:59,741 - octoprint.plugins.camerasettings - INFO - Excluding camera bcm2835-isp-capture1 based on ^bcm2835-isp-\w+$
2023-08-23 10:58:59,743 - octoprint.plugins.camerasettings - INFO - Excluding camera bcm2835-codec-isp based on ^bcm2835-codec-\w+$
2023-08-23 10:58:59,746 - octoprint.plugins.camerasettings - INFO - Excluding camera bcm2835-isp-output0 based on ^bcm2835-isp-\w+$
2023-08-23 10:58:59,779 - octoprint.plugins.camerasettings - INFO - Excluding camera bcm2835-codec-decode based on ^bcm2835-codec-\w+$
2023-08-23 10:58:59,812 - octoprint.plugins.camerasettings - INFO - Excluding camera bcm2835-isp-capture1 based on ^bcm2835-isp-\w+$
2023-08-23 10:58:59,815 - octoprint.plugins.camerasettings - INFO - Excluding camera bcm2835-isp-stats2 based on ^bcm2835-isp-\w+$
2023-08-23 10:58:59,817 - octoprint.plugins.camerasettings - INFO - Excluding camera bcm2835-isp-output0 based on ^bcm2835-isp-\w+$
2023-08-23 10:58:59,820 - octoprint.plugins.camerasettings - INFO - Excluding camera bcm2835-codec-encode_image based on ^bcm2835-codec-\w+$
2023-08-23 10:58:59,822 - octoprint.plugins.camerasettings - INFO - Excluding camera bcm2835-isp-capture0 based on ^bcm2835-isp-\w+$
2023-08-23 10:58:59,825 - octoprint.plugins.camerasettings - INFO - Excluding camera bcm2835-codec-encode based on ^bcm2835-codec-\w+$
2023-08-23 10:58:59,874 - octoprint.plugins.camerasettings - INFO - Excluding camera bcm2835-codec-image_fx based on ^bcm2835-codec-\w+$
2023-08-23 10:58:59,877 - octoprint.plugins.camerasettings - INFO - Excluding camera bcm2835-isp-stats2 based on ^bcm2835-isp-\w+$