2022-06-26 18:40:33,064 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2022-06-26 18:40:33,073 - octoprint.server - INFO - --- Log roll over detected --------------------------------------------------- 2022-06-26 18:40:33,073 - octoprint.server - INFO - OctoPrint 1.5.3 2022-06-26 18:40:33,080 - octoprint.plugin.core - INFO - 37 plugin(s) registered with the system: | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/appkeys | Autoselect Plugin (0.3.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_autoselect | Backup & Restore (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/backup | BLTouch Plugin (0.3.4) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_BLTouch | Change Filament Plugin (0.3.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_Change_Filament | Core Wizard (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/corewizard | Creality Temperature (1.2.4) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_CrealityTemperature | Detailed Progress Plugin (0.1.4) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_detailedprogress | Discovery (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/discovery | EEPROM Marlin Editor Plugin (1.2.1) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_eeprom_marlin | Error Tracking (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/errortracking | File Check (2021.2.23) (bundled) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_file_check | Firmware Check (2021.2.4) (bundled) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_firmware_check | Firmware Updater (1.10.10) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_firmwareupdater | Fullscreen Plugin (0.0.6) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_fullscreen | GCode Viewer (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/gcodeviewer | Logging (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/logging | MultiCam (0.2.8) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_multicam | MultipleUpload Plugin (1.1.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_MultipleUpload | Navbar Temperature Plugin (0.14) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_navbartemp | PauseForUser Event Plugin (0.1.1) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_pause_for_user_event | Pi Support Plugin (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/pluginmanager | Preheat Button (0.7.2) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_preheat | PrintTimeGenius Plugin (2.2.7) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_PrintTimeGenius | Sidebar Temp Graph (0.1.6) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_sidebartempgraph | Sidebar Webcam (0.1.8) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_webcamSB | Software Update (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/softwareupdate | Tempsgraph Plugin (0.3.7) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_tempsgraph | Themeify (1.2.2) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_themeify | Thingiverse Plugin (1.1.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_thingiverse | TP-Link Smartplug (0.9.26) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_tplinksmartplug | Virtual Printer (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2022-06-26 18:40:33,090 - octoprint.plugins.pi_support - WARNING - Fetching the current throttle state via "" doesn't work 2022-06-26 18:40:33,113 - octoprint.environment - INFO - Detected environment is Python 2.7.13 under Linux (linux2). Details: | hardware: | cores: 4 | freq: 1200.0 | ram: 918188032 | os: | bits: 32 | id: linux | platform: linux2 | plugins: | pi_support: | model: Raspberry Pi 3 Model B Rev 1.2 | octopi_version: 0.16.0 | python: | pip: 19.0.1 | version: 2.7.13 | virtualenv: /home/pi/oprint 2022-06-26 18:40:33,114 - octoprint.server - INFO - ------------------------------------------------------------------------------ 2022-06-26 18:40:34,795 - octoprint.util.pip - INFO - Version of pip is 19.0.1 2022-06-26 18:40:34,796 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python2.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-06-26 18:40:34,797 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-06-26 18:40:34,828 - octoprint.plugin.core - INFO - Initialized 37 plugin implementation(s) 2022-06-26 18:40:34,885 - octoprint.plugin.core - INFO - 37 plugin(s) registered with the system: | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/appkeys | Autoselect Plugin (0.3.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_autoselect | Backup & Restore (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/backup | BLTouch Plugin (0.3.4) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_BLTouch | Change Filament Plugin (0.3.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_Change_Filament | Core Wizard (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/corewizard | Creality Temperature (1.2.4) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_CrealityTemperature | Detailed Progress Plugin (0.1.4) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_detailedprogress | Discovery (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/discovery | EEPROM Marlin Editor Plugin (1.2.1) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_eeprom_marlin | Error Tracking (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/errortracking | File Check (2021.2.23) (bundled) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_file_check | Firmware Check (2021.2.4) (bundled) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_firmware_check | Firmware Updater (1.10.10) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_firmwareupdater | Fullscreen Plugin (0.0.6) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_fullscreen | GCode Viewer (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/gcodeviewer | Logging (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/logging | MultiCam (0.2.8) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_multicam | MultipleUpload Plugin (1.1.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_MultipleUpload | Navbar Temperature Plugin (0.14) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_navbartemp | PauseForUser Event Plugin (0.1.1) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_pause_for_user_event | Pi Support Plugin (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/pluginmanager | Preheat Button (0.7.2) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_preheat | PrintTimeGenius Plugin (2.2.7) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_PrintTimeGenius | Sidebar Temp Graph (0.1.6) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_sidebartempgraph | Sidebar Webcam (0.1.8) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_webcamSB | Software Update (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/softwareupdate | Tempsgraph Plugin (0.3.7) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_tempsgraph | Themeify (1.2.2) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_themeify | Thingiverse Plugin (1.1.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_thingiverse | TP-Link Smartplug (0.9.26) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_tplinksmartplug | Virtual Printer (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2022-06-26 18:40:34,900 - octoprint.environment - INFO - Detected environment is Python 2.7.13 under Linux (linux2). Details: | hardware: | cores: 4 | freq: 1200.0 | ram: 918188032 | os: | bits: 32 | id: linux | platform: linux2 | plugins: | pi_support: | model: Raspberry Pi 3 Model B Rev 1.2 | octopi_version: 0.16.0 | python: | pip: 19.0.1 | version: 2.7.13 | virtualenv: /home/pi/oprint 2022-06-26 18:40:35,108 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/webassets... 2022-06-26 18:40:35,446 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-cache... 2022-06-26 18:40:39,552 - octoprint.server - INFO - Shutting down intermediary server... 2022-06-26 18:40:39,628 - octoprint.server - INFO - Intermediary server shut down 2022-06-26 18:40:39,632 - octoprint.events - INFO - Processing startup event, this is our first event 2022-06-26 18:40:39,634 - octoprint.events - INFO - Adding 1 events to queue that were held back before startup event 2022-06-26 18:40:39,653 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue... 2022-06-26 18:40:39,654 - octoprint.server - INFO - Autoconnect on startup is configured, trying to connect to the printer... 2022-06-26 18:40:39,741 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json 2022-06-26 18:40:39,871 - octoprint.server - INFO - Trying to connect to configured serial port None 2022-06-26 18:40:39,912 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue 2022-06-26 18:40:40,065 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2022-06-26 18:40:40,118 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from https://plugins.octoprint.org/plugins.json 2022-06-26 18:40:40,229 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder... 2022-06-26 18:40:40,230 - octoprint.plugins.announcements - INFO - Loaded channel _important from https://octoprint.org/feeds/important.xml in 0.48s 2022-06-26 18:40:40,239 - octoprint.server.util.watchdog - INFO - ... initial scan done. 2022-06-26 18:40:40,448 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 1 port/baudrate candidates: /dev/ttyUSB0@250000 2022-06-26 18:40:40,461 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 250000 2022-06-26 18:40:40,556 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 250000 2022-06-26 18:40:40,859 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-06-26 18:40:40,869 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-06-26 18:40:41,523 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on octopi._http._tcp.local.' for _http._tcp.local. 2022-06-26 18:40:43,010 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2022-06-26 18:40:43,017 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on octopi._octoprint._tcp.local.' for _octoprint._tcp.local. 2022-06-26 18:40:43,203 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-06-26 18:40:43,224 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance on octopi for SSDP 2022-06-26 18:40:43,326 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python2 -m pip" as command to invoke pip 2022-06-26 18:40:43,350 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python2.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-06-26 18:40:43,362 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-06-26 18:40:43,665 - octoprint.plugins.announcements - INFO - Loaded channel _releases from https://octoprint.org/feeds/releases.xml in 1.5s 2022-06-26 18:40:44,214 - octoprint.plugins.announcements - INFO - Loaded channel _blog from https://octoprint.org/feeds/octoblog.xml in 0.36s 2022-06-26 18:40:44,400 - octoprint.server - INFO - Listening on http://127.0.0.1:5000 2022-06-26 18:40:44,926 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2022-06-26 18:40:45,062 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2022-06-26 18:40:45,197 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-06-26 18:40:45,934 - octoprint.plugins.announcements - INFO - Loaded channel _plugins from https://plugins.octoprint.org/feed.xml in 0.64s 2022-06-26 18:40:47,250 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python2 -m pip" as command to invoke pip 2022-06-26 18:40:47,256 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python2.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-06-26 18:40:47,280 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-06-26 18:40:47,287 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Error: No more candidates to test, and no working port/baudrate combination detected." 2022-06-26 18:40:47,349 - octoprint.util.comm - INFO - Changing monitoring state from "Error: No more candidates to test, and no working port/baudrate combination detected." to "Offline (Error: No more candidates to test, and no working port/baudrate combination detected.)" 2022-06-26 18:40:47,460 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 53.6GB. That is considered sufficient for updating. 2022-06-26 18:40:47,507 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2022-06-26 18:40:47,681 - octoprint.plugins.pluginmanager - INFO - Loaded plugin notices data from https://plugins.octoprint.org/notices.json 2022-06-26 18:40:48,488 - octoprint.plugins.tracking - INFO - Sent tracking event commerror_autodetect, payload: {u'commerror_text': u'No more candidates to test, and no working port/baudrate combination detected.'} 2022-06-26 18:40:48,500 - octoprint.plugins.announcements - INFO - Loaded channel _plugins from https://plugins.octoprint.org/feed.xml in 2.0s 2022-06-26 18:40:48,502 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk 2022-06-26 18:40:48,796 - octoprint.plugins.announcements - INFO - Loaded channel _octopi from https://octoprint.org/feeds/octopi.xml in 1.1s 2022-06-26 18:40:48,918 - octoprint.plugins.multicam - INFO - MultiCam Loaded! (more: [{'isButtonEnabled': False, 'name': 'Default', 'URL': '/webcam/?action=stream', 'streamRatio': '16:9', 'flipV': True, 'snapshot': 'http://127.0.0.1:8080/?action=snapshot', 'flipH': True, 'rotate90': False}]) 2022-06-26 18:40:49,219 - octoprint.plugins.themeify - INFO - Themeify initialized. 2022-06-26 18:40:49,224 - octoprint.plugins.tplinksmartplug - INFO - TPLinkSmartplug loaded! 2022-06-26 18:40:49,304 - octoprint.plugins.webcamSB - INFO - Sidebar Webcam LOADED 2022-06-26 18:40:49,353 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 27} 2022-06-26 18:40:49,725 - octoprint.plugins.announcements - INFO - Loaded channel _octopi from https://octoprint.org/feeds/octopi.xml in 0.72s 2022-06-26 18:40:49,956 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2022-06-26 18:40:50,013 - octoprint.plugins.tracking - INFO - Sent tracking event startup, payload: {u'python': '2.7.13', u'os': u'linux', u'ram': 918188032, u'octopi_version': u'0.16.0', u'version': u'1.5.3', u'pip': '19.0.1', u'cores': 4, u'freq': 1200.0, u'pi_model': u'Raspberry Pi 3 Model B Rev 1.2', u'bits': 32} 2022-06-26 18:40:50,406 - octoprint.plugins.tracking - INFO - Sent tracking event pong, payload: {u'python': '2.7.13', u'os': u'linux', u'ram': 918188032, u'octopi_version': u'0.16.0', u'version': u'1.5.3', u'plugins': u'multipleupload:1.1.0,sidebartempgraph:0.1.6,firmwareupdater:1.10.10,detailedprogress:0.1.4,bltouch:0.3.4,fullscreen:0.0.6,autoselect:0.3.0,pause_for_user_event:0.1.1,crealitytemperature:1.2.4,themeify:1.2.2,webcamsb:0.1.8,multicam:0.2.8,thingiverse:1.1.0,tplinksmartplug:0.9.26,navbartemp:0.14,change_filament:0.3.0,tempsgraph:0.3.7,eeprom_marlin:1.2.1,printtimegenius:2.2.7,preheat:0.7.2', u'pip': '19.0.1', u'cores': 4, u'freq': 1200.0, u'pi_model': u'Raspberry Pi 3 Model B Rev 1.2', u'bits': 32} 2022-06-26 18:42:21,244 - octoprint.plugins.pi_support - WARNING - Fetching the current throttle state via "" doesn't work 2022-06-26 18:42:24,916 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.0.215 2022-06-26 18:42:30,749 - octoprint.access.users - INFO - Logged in user: NedSin 2022-06-26 18:42:30,756 - octoprint.server.api - INFO - Actively logging in user NedSin from ::ffff:192.168.0.215 2022-06-26 18:42:30,896 - octoprint.server.util.flask - INFO - Passively logging in user NedSin from ::ffff:192.168.0.215 2022-06-26 18:42:30,898 - octoprint.access.users - INFO - Logged in user: NedSin 2022-06-26 18:42:31,645 - octoprint.server.util.flask.PreemptiveCache - INFO - Adding entry for / and {u'query_string': u'l10n=de', u'path': u'/', u'_count': 1, u'_timestamp': 1656265351.645687, u'base_url': u'http://ender3.nednet/'} 2022-06-26 18:42:51,461 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.0.215 2022-06-26 18:42:53,821 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.0.215 2022-06-26 18:42:53,862 - octoprint.server.util.flask - INFO - Passively logging in user NedSin from ::ffff:192.168.0.215 2022-06-26 18:42:53,864 - octoprint.access.users - INFO - Logged in user: NedSin 2022-06-26 18:43:00,239 - octoprint.plugins.pi_support - WARNING - Fetching the current throttle state via "" doesn't work 2022-06-26 18:43:05,900 - octoprint.server.util.sockjs - INFO - User NedSin logged in on the socket from client ::ffff:192.168.0.215 2022-06-26 18:43:15,497 - octoprint.plugins.softwareupdate - INFO - Starting update of octoprint to 1.8.1... 2022-06-26 18:43:24,335 - octoprint.plugins.softwareupdate - ERROR - Update of octoprint can not be performed, please also check plugin_softwareupdate_console.log for possible causes of this Traceback (most recent call last): File "/home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/softwareupdate/__init__.py", line 1788, in _perform_update target, populated_check, target_version, log_cb=self._log, online=online File "/home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/softwareupdate/updaters/pip.py", line 144, in perform_update "Error while executing pip install", (stdout, stderr) UpdateError: Error while executing pip install 2022-06-26 18:43:24,343 - octoprint.plugins.softwareupdate - INFO - Starting update of PrintTimeGenius to 2.2.8... 2022-06-26 18:43:24,513 - octoprint.plugins.tracking - INFO - Sent tracking event update_failed, payload: {'to_version': u'1.8.1', 'from_version': u'1.5.3', 'target': u'octoprint'} 2022-06-26 18:43:38,466 - octoprint.plugins.softwareupdate - INFO - Update of PrintTimeGenius to 2.2.8 successful! 2022-06-26 18:43:39,052 - octoprint.plugins.tracking - INFO - Sent tracking event update_successful, payload: {'to_version': u'2.2.8', 'from_version': '2.2.7', 'target': u'PrintTimeGenius'} 2022-06-26 18:43:39,115 - octoprint.plugins.softwareupdate - INFO - Starting update of detailedprogress to 0.2.7... 2022-06-26 18:43:42,832 - octoprint.plugins.softwareupdate - ERROR - Update of detailedprogress can not be performed, please also check plugin_softwareupdate_console.log for possible causes of this Traceback (most recent call last): File "/home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/softwareupdate/__init__.py", line 1788, in _perform_update target, populated_check, target_version, log_cb=self._log, online=online File "/home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/softwareupdate/updaters/pip.py", line 144, in perform_update "Error while executing pip install", (stdout, stderr) UpdateError: Error while executing pip install 2022-06-26 18:43:42,839 - octoprint.plugins.softwareupdate - INFO - Starting update of firmware_check to 2021.10.11... 2022-06-26 18:43:43,006 - octoprint.plugins.tracking - INFO - Sent tracking event update_failed, payload: {'to_version': u'0.2.7', 'from_version': '0.1.4', 'target': u'detailedprogress'} 2022-06-26 18:43:53,259 - octoprint.plugins.softwareupdate - INFO - Update of firmware_check to 2021.10.11 successful! 2022-06-26 18:43:53,587 - octoprint.plugins.softwareupdate - INFO - Starting update of firmwareupdater to 1.13.3... 2022-06-26 18:43:53,644 - octoprint.plugins.tracking - INFO - Sent tracking event update_successful, payload: {'to_version': u'2021.10.11', 'from_version': '2021.2.4', 'target': u'firmware_check'} 2022-06-26 18:44:05,283 - octoprint.plugins.softwareupdate - INFO - Update of firmwareupdater to 1.13.3 successful! 2022-06-26 18:44:05,612 - octoprint.plugins.tracking - INFO - Sent tracking event update_successful, payload: {'to_version': u'1.13.3', 'from_version': '1.10.10', 'target': u'firmwareupdater'} 2022-06-26 18:44:05,677 - octoprint.plugins.softwareupdate - INFO - Starting update of multicam to 0.3.0... 2022-06-26 18:44:16,915 - octoprint.plugins.softwareupdate - INFO - Update of multicam to 0.3.0 successful! 2022-06-26 18:44:17,222 - octoprint.plugins.softwareupdate - INFO - Starting update of preheat to 0.8.0... 2022-06-26 18:44:17,298 - octoprint.plugins.tracking - INFO - Sent tracking event update_successful, payload: {'to_version': u'0.3.0', 'from_version': '0.2.8', 'target': u'multicam'} 2022-06-26 18:44:28,954 - octoprint.plugins.softwareupdate - INFO - Update of preheat to 0.8.0 successful! 2022-06-26 18:44:29,272 - octoprint.plugins.softwareupdate - INFO - Starting update of tplinksmartplug to 1.0.2... 2022-06-26 18:44:29,292 - octoprint.plugins.tracking - INFO - Sent tracking event update_successful, payload: {'to_version': u'0.8.0', 'from_version': '0.7.2', 'target': u'preheat'} 2022-06-26 18:44:41,608 - octoprint.plugins.softwareupdate - INFO - Update of tplinksmartplug to 1.0.2 successful! 2022-06-26 18:44:42,086 - octoprint.plugins.tracking - INFO - Sent tracking event update_successful, payload: {'to_version': u'1.0.2', 'from_version': '0.9.26', 'target': u'tplinksmartplug'} 2022-06-26 18:45:46,598 - octoprint.plugins.pi_support - WARNING - Fetching the current throttle state via "" doesn't work 2022-06-26 18:45:56,796 - octoprint.plugins.softwareupdate - INFO - Starting update of octoprint to 1.8.1... 2022-06-26 18:46:07,848 - octoprint.plugins.softwareupdate - ERROR - Update of octoprint can not be performed, please also check plugin_softwareupdate_console.log for possible causes of this Traceback (most recent call last): File "/home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/softwareupdate/__init__.py", line 1788, in _perform_update target, populated_check, target_version, log_cb=self._log, online=online File "/home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/softwareupdate/updaters/pip.py", line 144, in perform_update "Error while executing pip install", (stdout, stderr) UpdateError: Error while executing pip install 2022-06-26 18:46:08,019 - octoprint.plugins.tracking - INFO - Sent tracking event update_failed, payload: {'to_version': u'1.8.1', 'from_version': u'1.5.3', 'target': u'octoprint'} 2022-06-26 18:46:32,496 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk 2022-06-26 18:46:41,601 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json 2022-06-26 18:46:43,765 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk 2022-06-26 18:46:46,567 - octoprint.plugins.softwareupdate - INFO - Starting update of octoprint to 1.8.1... 2022-06-26 18:46:55,666 - octoprint.plugins.softwareupdate - ERROR - Update of octoprint can not be performed, please also check plugin_softwareupdate_console.log for possible causes of this Traceback (most recent call last): File "/home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/softwareupdate/__init__.py", line 1788, in _perform_update target, populated_check, target_version, log_cb=self._log, online=online File "/home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/softwareupdate/updaters/pip.py", line 144, in perform_update "Error while executing pip install", (stdout, stderr) UpdateError: Error while executing pip install 2022-06-26 18:46:55,672 - octoprint.plugins.softwareupdate - INFO - Starting update of PrintTimeGenius to 2.2.8... 2022-06-26 18:46:55,889 - octoprint.plugins.tracking - INFO - Sent tracking event update_failed, payload: {'to_version': u'1.8.1', 'from_version': u'1.5.3', 'target': u'octoprint'} 2022-06-26 18:47:16,396 - octoprint.plugins.softwareupdate - INFO - Update of PrintTimeGenius to 2.2.8 successful! 2022-06-26 18:47:16,707 - octoprint.plugins.softwareupdate - INFO - Starting update of detailedprogress to 0.2.7... 2022-06-26 18:47:16,759 - octoprint.plugins.tracking - INFO - Sent tracking event update_successful, payload: {'to_version': u'2.2.8', 'from_version': '2.2.7', 'target': u'PrintTimeGenius'} 2022-06-26 18:47:20,308 - octoprint.plugins.softwareupdate - ERROR - Update of detailedprogress can not be performed, please also check plugin_softwareupdate_console.log for possible causes of this Traceback (most recent call last): File "/home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/softwareupdate/__init__.py", line 1788, in _perform_update target, populated_check, target_version, log_cb=self._log, online=online File "/home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/softwareupdate/updaters/pip.py", line 144, in perform_update "Error while executing pip install", (stdout, stderr) UpdateError: Error while executing pip install 2022-06-26 18:47:20,353 - octoprint.plugins.softwareupdate - INFO - Starting update of firmware_check to 2021.10.11... 2022-06-26 18:47:20,557 - octoprint.plugins.tracking - INFO - Sent tracking event update_failed, payload: {'to_version': u'0.2.7', 'from_version': '0.1.4', 'target': u'detailedprogress'} 2022-06-26 18:47:36,954 - octoprint.plugins.softwareupdate - INFO - Update of firmware_check to 2021.10.11 successful! 2022-06-26 18:47:37,304 - octoprint.plugins.softwareupdate - INFO - Starting update of firmwareupdater to 1.13.3... 2022-06-26 18:47:37,365 - octoprint.plugins.tracking - INFO - Sent tracking event update_successful, payload: {'to_version': u'2021.10.11', 'from_version': '2021.2.4', 'target': u'firmware_check'} 2022-06-26 18:47:54,598 - octoprint.plugins.softwareupdate - INFO - Update of firmwareupdater to 1.13.3 successful! 2022-06-26 18:47:54,956 - octoprint.plugins.softwareupdate - INFO - Starting update of multicam to 0.3.0... 2022-06-26 18:47:55,076 - octoprint.plugins.tracking - INFO - Sent tracking event update_successful, payload: {'to_version': u'1.13.3', 'from_version': '1.10.10', 'target': u'firmwareupdater'} 2022-06-26 18:48:11,833 - octoprint.plugins.softwareupdate - INFO - Update of multicam to 0.3.0 successful! 2022-06-26 18:48:12,193 - octoprint.plugins.softwareupdate - INFO - Starting update of preheat to 0.8.0... 2022-06-26 18:48:12,213 - octoprint.plugins.tracking - INFO - Sent tracking event update_successful, payload: {'to_version': u'0.3.0', 'from_version': '0.2.8', 'target': u'multicam'} 2022-06-26 18:48:28,551 - octoprint.plugins.softwareupdate - INFO - Update of preheat to 0.8.0 successful! 2022-06-26 18:48:28,942 - octoprint.plugins.softwareupdate - INFO - Starting update of tplinksmartplug to 1.0.2... 2022-06-26 18:48:29,086 - octoprint.plugins.tracking - INFO - Sent tracking event update_successful, payload: {'to_version': u'0.8.0', 'from_version': '0.7.2', 'target': u'preheat'} 2022-06-26 18:48:47,262 - octoprint.plugins.softwareupdate - INFO - Update of tplinksmartplug to 1.0.2 successful! 2022-06-26 18:48:47,648 - octoprint.plugins.tracking - INFO - Sent tracking event update_successful, payload: {'to_version': u'1.0.2', 'from_version': '0.9.26', 'target': u'tplinksmartplug'} 2022-06-26 18:49:21,740 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk 2022-06-26 18:49:25,883 - octoprint.plugins.softwareupdate - INFO - Starting update of octoprint to 1.8.1... 2022-06-26 18:49:34,375 - octoprint.plugins.softwareupdate - ERROR - Update of octoprint can not be performed, please also check plugin_softwareupdate_console.log for possible causes of this Traceback (most recent call last): File "/home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/softwareupdate/__init__.py", line 1788, in _perform_update target, populated_check, target_version, log_cb=self._log, online=online File "/home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/softwareupdate/updaters/pip.py", line 144, in perform_update "Error while executing pip install", (stdout, stderr) UpdateError: Error while executing pip install 2022-06-26 18:49:34,589 - octoprint.plugins.tracking - INFO - Sent tracking event update_failed, payload: {'to_version': u'1.8.1', 'from_version': u'1.5.3', 'target': u'octoprint'} 2022-06-26 18:49:43,494 - octoprint.plugins.softwareupdate - WARNING - Could not check octoprint for updates due to running into a rate limit: Github rate limit exceeded, reset at 2022-06-26 18:40 2022-06-26 18:49:43,795 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk 2022-06-26 18:49:45,309 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk 2022-06-26 18:49:54,662 - octoprint.plugins.softwareupdate - WARNING - Could not check octoprint for updates due to running into a rate limit: Github rate limit exceeded, reset at 2022-06-26 18:40 2022-06-26 18:49:54,944 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk 2022-06-26 18:49:59,951 - octoprint.plugins.softwareupdate - INFO - Starting update of PrintTimeGenius to 2.2.8... 2022-06-26 18:50:21,914 - octoprint.plugins.softwareupdate - INFO - Update of PrintTimeGenius to 2.2.8 successful! 2022-06-26 18:50:22,285 - octoprint.plugins.softwareupdate - INFO - Starting update of detailedprogress to 0.2.7... 2022-06-26 18:50:22,370 - octoprint.plugins.tracking - INFO - Sent tracking event update_successful, payload: {'to_version': u'2.2.8', 'from_version': '2.2.7', 'target': u'PrintTimeGenius'} 2022-06-26 18:50:25,851 - octoprint.plugins.softwareupdate - ERROR - Update of detailedprogress can not be performed, please also check plugin_softwareupdate_console.log for possible causes of this Traceback (most recent call last): File "/home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/softwareupdate/__init__.py", line 1788, in _perform_update target, populated_check, target_version, log_cb=self._log, online=online File "/home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/softwareupdate/updaters/pip.py", line 144, in perform_update "Error while executing pip install", (stdout, stderr) UpdateError: Error while executing pip install 2022-06-26 18:50:25,895 - octoprint.plugins.softwareupdate - INFO - Starting update of firmware_check to 2021.10.11... 2022-06-26 18:50:26,082 - octoprint.plugins.tracking - INFO - Sent tracking event update_failed, payload: {'to_version': u'0.2.7', 'from_version': '0.1.4', 'target': u'detailedprogress'} 2022-06-26 18:50:41,345 - octoprint.plugins.softwareupdate - INFO - Update of firmware_check to 2021.10.11 successful! 2022-06-26 18:50:41,693 - octoprint.plugins.tracking - INFO - Sent tracking event update_successful, payload: {'to_version': u'2021.10.11', 'from_version': '2021.2.4', 'target': u'firmware_check'} 2022-06-26 18:50:41,716 - octoprint.plugins.softwareupdate - INFO - Starting update of firmwareupdater to 1.13.3... 2022-06-26 18:50:58,927 - octoprint.plugins.softwareupdate - INFO - Update of firmwareupdater to 1.13.3 successful! 2022-06-26 18:50:59,287 - octoprint.plugins.softwareupdate - INFO - Starting update of multicam to 0.3.0... 2022-06-26 18:50:59,333 - octoprint.plugins.tracking - INFO - Sent tracking event update_successful, payload: {'to_version': u'1.13.3', 'from_version': '1.10.10', 'target': u'firmwareupdater'} 2022-06-26 18:51:16,772 - octoprint.plugins.softwareupdate - INFO - Update of multicam to 0.3.0 successful! 2022-06-26 18:51:17,132 - octoprint.plugins.softwareupdate - INFO - Starting update of preheat to 0.8.0... 2022-06-26 18:51:17,182 - octoprint.plugins.tracking - INFO - Sent tracking event update_successful, payload: {'to_version': u'0.3.0', 'from_version': '0.2.8', 'target': u'multicam'} 2022-06-26 18:51:33,893 - octoprint.plugins.softwareupdate - INFO - Update of preheat to 0.8.0 successful! 2022-06-26 18:51:34,227 - octoprint.plugins.softwareupdate - INFO - Starting update of tplinksmartplug to 1.0.2... 2022-06-26 18:51:34,306 - octoprint.plugins.tracking - INFO - Sent tracking event update_successful, payload: {'to_version': u'0.8.0', 'from_version': '0.7.2', 'target': u'preheat'} 2022-06-26 18:51:52,042 - octoprint.plugins.softwareupdate - INFO - Update of tplinksmartplug to 1.0.2 successful! 2022-06-26 18:51:52,420 - octoprint.plugins.tracking - INFO - Sent tracking event update_successful, payload: {'to_version': u'1.0.2', 'from_version': '0.9.26', 'target': u'tplinksmartplug'} 2022-06-26 18:52:37,486 - octoprint.plugins.softwareupdate - INFO - Starting update of detailedprogress to 0.2.7... 2022-06-26 18:52:41,063 - octoprint.plugins.softwareupdate - ERROR - Update of detailedprogress can not be performed, please also check plugin_softwareupdate_console.log for possible causes of this Traceback (most recent call last): File "/home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/softwareupdate/__init__.py", line 1788, in _perform_update target, populated_check, target_version, log_cb=self._log, online=online File "/home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/softwareupdate/updaters/pip.py", line 144, in perform_update "Error while executing pip install", (stdout, stderr) UpdateError: Error while executing pip install 2022-06-26 18:52:41,257 - octoprint.plugins.tracking - INFO - Sent tracking event update_failed, payload: {'to_version': u'0.2.7', 'from_version': '0.1.4', 'target': u'detailedprogress'} 2022-06-26 18:52:54,935 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2022-06-26 18:52:55,011 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 1 port/baudrate candidates: /dev/ttyUSB0@250000 2022-06-26 18:52:55,012 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 250000 2022-06-26 18:52:55,014 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 250000 2022-06-26 18:52:55,035 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-06-26 18:52:55,058 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-06-26 18:52:57,070 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2022-06-26 18:52:57,172 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-06-26 18:52:57,311 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Operational" 2022-06-26 18:52:57,563 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-06-26 18:52:57,676 - octoprint.plugins.firmwareupdater - INFO - Got CONNECTED event 2022-06-26 18:52:57,683 - octoprint.plugins.firmwareupdater - INFO - Run postflash flag is not set 2022-06-26 18:53:06,449 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin bugfix-1.1.x (Github)" 2022-06-26 18:53:06,489 - octoprint.plugins.firmware_check - INFO - Your printer's firmware is a development build. It might be more unstable than a release version and should be updated regularly.. More information at https://faq.octoprint.org/warning-firmware-development 2022-06-26 18:53:06,561 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting 2022-06-26 18:53:06,704 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {u'printer_baudrate': 250000, u'printer_port': u'AUTO', u'firmware_name': u'Marlin bugfix-1.1.x (Github)'} 2022-06-26 18:53:06,723 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting 2022-06-26 18:53:15,054 - octoprint.util.comm - INFO - Printer seems to support the busy protocol, will adjust timeouts and set busy interval accordingly 2022-06-26 18:53:19,145 - octoprint.util.comm - INFO - Telling the printer to set the busy interval to our "communicationBusy" timeout - 1s = 2s 2022-06-26 18:54:27,465 - octoprint.server.api.system - INFO - Performing command for core:restart: sudo service octoprint restart 2022-06-26 18:54:27,693 - octoprint.server - INFO - Shutting down... 2022-06-26 18:54:28,385 - octoprint.server - INFO - Calling on_shutdown on plugins 2022-06-26 18:54:28,389 - octoprint.events - INFO - Processing shutdown event, this will be our last event 2022-06-26 18:54:28,421 - octoprint.events - INFO - Event loop shut down 2022-06-26 18:54:29,141 - octoprint.plugins.tracking - INFO - Sent tracking event shutdown, payload: {} 2022-06-26 18:54:29,175 - octoprint.server - INFO - Goodbye! 2022-06-26 18:54:34,207 - octoprint.startup - INFO - ****************************************************************************** 2022-06-26 18:54:34,209 - octoprint.startup - INFO - Starting OctoPrint 1.5.3 2022-06-26 18:54:34,210 - octoprint.startup - INFO - ****************************************************************************** 2022-06-26 18:54:34,296 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity changed from offline to online 2022-06-26 18:54:34,307 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: online 2022-06-26 18:54:34,307 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 192.168.0.1:53 is working 2022-06-26 18:54:34,308 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is working 2022-06-26 18:54:34,350 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2022-06-26 18:54:37,282 - octoprint.startup - INFO - Added settings overlay from plugin firmware_check 2022-06-26 18:54:37,300 - octoprint.plugin.core - INFO - Found 37 plugin(s) providing 37 mixin implementations, 70 hook handlers 2022-06-26 18:54:37,584 - octoprint.server.heartbeat - INFO - Starting server heartbeat, 900.0s interval 2022-06-26 18:54:37,617 - octoprint.server - INFO - Intermediary server started 2022-06-26 18:54:37,666 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/pi/.octoprint/uploads... 2022-06-26 18:54:39,931 - octoprint.filemanager.storage - INFO - ... file metadata for /home/pi/.octoprint/uploads initialized successfully. 2022-06-26 18:54:39,938 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_SHOW (needs: u"Need(method='role', value=u'plugin_action_command_notification_show')") 2022-06-26 18:54:39,939 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_CLEAR (needs: u"Need(method='role', value=u'plugin_action_command_notification_clear')") 2022-06-26 18:54:39,941 - octoprint.server - INFO - Added new permission from plugin action_command_prompt: PLUGIN_ACTION_COMMAND_PROMPT_INTERACT (needs: u"Need(method='role', value=u'plugin_action_command_prompt_interact')") 2022-06-26 18:54:39,943 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_READ (needs: u"Need(method='role', value=u'plugin_announcements_read')") 2022-06-26 18:54:39,946 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_MANAGE (needs: u"Need(method='role', value=u'plugin_announcements_manage'), Need(method='role', value=u'plugin_announcements_read')") 2022-06-26 18:54:39,947 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_ADMIN (needs: u"Need(method='role', value=u'plugin_appkeys_admin')") 2022-06-26 18:54:39,949 - octoprint.server - INFO - Added new permission from plugin backup: PLUGIN_BACKUP_ACCESS (needs: u"Need(method='role', value=u'plugin_backup_access')") 2022-06-26 18:54:39,954 - octoprint.server - INFO - Added new permission from plugin firmware_check: PLUGIN_FIRMWARE_CHECK_DISPLAY (needs: u"Need(method='role', value=u'plugin_firmware_check_display')") 2022-06-26 18:54:39,956 - octoprint.server - INFO - Added new permission from plugin logging: PLUGIN_LOGGING_MANAGE (needs: u"Need(method='role', value=u'plugin_logging_manage')") 2022-06-26 18:54:39,958 - octoprint.server - INFO - Added new permission from plugin pi_support: PLUGIN_PI_SUPPORT_STATUS (needs: u"Need(method='role', value=u'plugin_pi_support_check')") 2022-06-26 18:54:39,961 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_MANAGE (needs: u"Need(method='role', value=u'plugin_pluginmanager_manage')") 2022-06-26 18:54:39,965 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_INSTALL (needs: u"Need(method='role', value=u'plugin_pluginmanager_install'), Need(method='role', value=u'plugin_pluginmanager_manage')") 2022-06-26 18:54:39,970 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CHECK (needs: u"Need(method='role', value=u'plugin_softwareupdate_check')") 2022-06-26 18:54:39,972 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_UPDATE (needs: u"Need(method='role', value=u'plugin_softwareupdate_update')") 2022-06-26 18:54:39,974 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CONFIGURE (needs: u"Need(method='role', value=u'plugin_softwareupdate_configure')") 2022-06-26 18:54:39,976 - octoprint.server - INFO - Added new permission from plugin tplinksmartplug: PLUGIN_TPLINKSMARTPLUG_CONTROL (needs: u"Need(method='role', value=u'plugin_tplinksmartplug_admin')") 2022-06-26 18:54:40,013 - octoprint.printer.standard - INFO - Using print time estimator provided by PrintTimeGenius 2022-06-26 18:54:40,153 - octoprint.plugins.firmwareupdater - INFO - Python binproto2 package installed: False 2022-06-26 18:54:41,014 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk 2022-06-26 18:54:43,035 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python2 -m pip" as command to invoke pip 2022-06-26 18:54:44,899 - octoprint.util.pip - INFO - Version of pip is 19.0.1 2022-06-26 18:54:44,901 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python2.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-06-26 18:54:44,902 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-06-26 18:54:44,935 - octoprint.plugin.core - INFO - Initialized 37 plugin implementation(s) 2022-06-26 18:54:44,984 - octoprint.plugins.firmwareupdater - INFO - Migrating settings for profile 0: Default 2022-06-26 18:54:45,862 - octoprint.plugin.core - INFO - 37 plugin(s) registered with the system: | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/appkeys | Autoselect Plugin (0.3.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_autoselect | Backup & Restore (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/backup | BLTouch Plugin (0.3.4) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_BLTouch | Change Filament Plugin (0.3.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_Change_Filament | Core Wizard (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/corewizard | Creality Temperature (1.2.4) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_CrealityTemperature | Detailed Progress Plugin (0.1.4) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_detailedprogress | Discovery (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/discovery | EEPROM Marlin Editor Plugin (1.2.1) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_eeprom_marlin | Error Tracking (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/errortracking | File Check (2021.2.23) (bundled) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_file_check | Firmware Check (2021.10.11) (bundled) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_firmware_check | Firmware Updater (1.13.3) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_firmwareupdater | Fullscreen Plugin (0.0.6) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_fullscreen | GCode Viewer (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/gcodeviewer | Logging (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/logging | MultiCam (0.3.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_multicam | MultipleUpload Plugin (1.1.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_MultipleUpload | Navbar Temperature Plugin (0.14) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_navbartemp | PauseForUser Event Plugin (0.1.1) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_pause_for_user_event | Pi Support Plugin (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/pluginmanager | Preheat Button (0.8.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_preheat | PrintTimeGenius Plugin (2.2.8) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_PrintTimeGenius | Sidebar Temp Graph (0.1.6) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_sidebartempgraph | Sidebar Webcam (0.1.8) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_webcamSB | Software Update (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/softwareupdate | Tempsgraph Plugin (0.3.7) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_tempsgraph | Themeify (1.2.2) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_themeify | Thingiverse Plugin (1.1.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_thingiverse | TP-Link Smartplug (1.0.2) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_tplinksmartplug | Virtual Printer (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2022-06-26 18:54:45,877 - octoprint.plugins.pi_support - WARNING - Fetching the current throttle state via "" doesn't work 2022-06-26 18:54:45,894 - octoprint.environment - INFO - Detected environment is Python 2.7.13 under Linux (linux2). Details: | hardware: | cores: 4 | freq: 1200.0 | ram: 918188032 | os: | bits: 32 | id: linux | platform: linux2 | plugins: | pi_support: | model: Raspberry Pi 3 Model B Rev 1.2 | octopi_version: 0.16.0 | python: | pip: 19.0.1 | version: 2.7.13 | virtualenv: /home/pi/oprint 2022-06-26 18:54:45,923 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/webassets... 2022-06-26 18:54:45,978 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-cache... 2022-06-26 18:54:48,201 - octoprint.plugins.firmwareupdater - INFO - Setting maximum upload size for /flash to 5243904 2022-06-26 18:54:48,202 - octoprint.server - INFO - Shutting down intermediary server... 2022-06-26 18:54:48,459 - octoprint.server - INFO - Intermediary server shut down 2022-06-26 18:54:48,465 - octoprint.events - INFO - Processing startup event, this is our first event 2022-06-26 18:54:48,466 - octoprint.events - INFO - Adding 1 events to queue that were held back before startup event 2022-06-26 18:54:48,476 - octoprint.server - INFO - Autoconnect on startup is configured, trying to connect to the printer... 2022-06-26 18:54:48,477 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue... 2022-06-26 18:54:48,514 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json 2022-06-26 18:54:48,609 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2022-06-26 18:54:50,416 - octoprint.server - INFO - Trying to connect to configured serial port None 2022-06-26 18:54:50,490 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue 2022-06-26 18:54:50,656 - octoprint.plugins.softwareupdate - WARNING - Could not check firmware_check for updates due to running into a rate limit: Github rate limit exceeded, reset at 2022-06-26 18:40 2022-06-26 18:54:50,862 - octoprint.plugins.softwareupdate - WARNING - Could not check preheat for updates due to running into a rate limit: Github rate limit exceeded, reset at 2022-06-26 18:40 2022-06-26 18:54:50,866 - octoprint.plugins.softwareupdate - WARNING - Could not check tplinksmartplug for updates due to running into a rate limit: Github rate limit exceeded, reset at 2022-06-26 18:40 2022-06-26 18:54:50,894 - octoprint.plugins.softwareupdate - WARNING - Could not check firmwareupdater for updates due to running into a rate limit: Github rate limit exceeded, reset at 2022-06-26 18:40 2022-06-26 18:54:51,101 - octoprint.plugins.softwareupdate - WARNING - Could not check multicam for updates due to running into a rate limit: Github rate limit exceeded, reset at 2022-06-26 18:40 2022-06-26 18:54:51,270 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2022-06-26 18:54:51,432 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder... 2022-06-26 18:54:51,462 - octoprint.server.util.watchdog - INFO - ... initial scan done. 2022-06-26 18:54:52,033 - octoprint.plugins.softwareupdate - WARNING - Could not check PrintTimeGenius for updates due to running into a rate limit: Github rate limit exceeded, reset at 2022-06-26 18:40 2022-06-26 18:54:52,737 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk 2022-06-26 18:54:52,950 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on octopi._http._tcp.local.' for _http._tcp.local. 2022-06-26 18:54:53,113 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 1 port/baudrate candidates: /dev/ttyUSB0@250000 2022-06-26 18:54:53,149 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 250000 2022-06-26 18:54:53,172 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 250000 2022-06-26 18:54:53,840 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-06-26 18:54:54,159 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-06-26 18:54:54,160 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on octopi._octoprint._tcp.local.' for _octoprint._tcp.local. 2022-06-26 18:54:54,258 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance on octopi for SSDP 2022-06-26 18:54:54,723 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2022-06-26 18:54:54,786 - octoprint.server - INFO - Listening on http://127.0.0.1:5000 2022-06-26 18:54:54,988 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2022-06-26 18:54:56,311 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2022-06-26 18:54:56,444 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-06-26 18:54:56,909 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.0.215 2022-06-26 18:54:57,194 - octoprint.server.util.flask - INFO - Passively logging in user NedSin from ::ffff:192.168.0.215 2022-06-26 18:54:57,200 - octoprint.access.users - INFO - Logged in user: NedSin 2022-06-26 18:54:57,525 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python2 -m pip" as command to invoke pip 2022-06-26 18:54:57,530 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python2.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-06-26 18:54:57,531 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-06-26 18:54:57,764 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 53.6GB. That is considered sufficient for updating. 2022-06-26 18:54:58,223 - octoprint.plugins.pi_support - WARNING - Fetching the current throttle state via "" doesn't work 2022-06-26 18:54:58,476 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2022-06-26 18:54:58,490 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-06-26 18:54:59,296 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2022-06-26 18:54:59,373 - octoprint.plugins.multicam - INFO - MultiCam Loaded! (more: [{'isButtonEnabled': False, 'name': 'Default', 'URL': '/webcam/?action=stream', 'streamRatio': '16:9', 'flipV': True, 'snapshot': 'http://127.0.0.1:8080/?action=snapshot', 'flipH': True, 'rotate90': False}]) 2022-06-26 18:54:59,417 - octoprint.plugins.themeify - INFO - Themeify initialized. 2022-06-26 18:54:59,418 - octoprint.plugins.tplinksmartplug - INFO - TPLinkSmartplug loaded! 2022-06-26 18:54:59,450 - octoprint.plugins.webcamSB - INFO - Sidebar Webcam LOADED 2022-06-26 18:54:59,608 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 24} 2022-06-26 18:55:00,358 - octoprint.plugins.tracking - INFO - Sent tracking event pong, payload: {u'python': '2.7.13', u'os': u'linux', u'ram': 918188032, u'octopi_version': u'0.16.0', u'version': u'1.5.3', u'plugins': u'multipleupload:1.1.0,sidebartempgraph:0.1.6,firmwareupdater:1.13.3,detailedprogress:0.1.4,bltouch:0.3.4,fullscreen:0.0.6,autoselect:0.3.0,pause_for_user_event:0.1.1,crealitytemperature:1.2.4,themeify:1.2.2,webcamsb:0.1.8,multicam:0.3.0,thingiverse:1.1.0,tplinksmartplug:1.0.2,navbartemp:0.14,change_filament:0.3.0,tempsgraph:0.3.7,eeprom_marlin:1.2.1,printtimegenius:2.2.8,preheat:0.8.0', u'pip': '19.0.1', u'cores': 4, u'freq': 1200.0, u'pi_model': u'Raspberry Pi 3 Model B Rev 1.2', u'bits': 32} 2022-06-26 18:55:00,501 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Error: No more candidates to test, and no working port/baudrate combination detected." 2022-06-26 18:55:00,568 - octoprint.plugins.pi_support - WARNING - Fetching the current throttle state via "" doesn't work 2022-06-26 18:55:00,679 - octoprint.util.comm - INFO - Changing monitoring state from "Error: No more candidates to test, and no working port/baudrate combination detected." to "Offline (Error: No more candidates to test, and no working port/baudrate combination detected.)" 2022-06-26 18:55:00,733 - octoprint.plugins.tracking - INFO - Sent tracking event startup, payload: {u'python': '2.7.13', u'os': u'linux', u'ram': 918188032, u'octopi_version': u'0.16.0', u'version': u'1.5.3', u'pip': '19.0.1', u'cores': 4, u'freq': 1200.0, u'pi_model': u'Raspberry Pi 3 Model B Rev 1.2', u'bits': 32} 2022-06-26 18:55:00,883 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2022-06-26 18:55:01,026 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'query_string': 'l10n=de', 'path': '/', 'base_url': 'http://ender3.nednet/'} 2022-06-26 18:55:01,273 - octoprint.plugins.tracking - INFO - Sent tracking event commerror_autodetect, payload: {u'commerror_text': u'No more candidates to test, and no working port/baudrate combination detected.'} 2022-06-26 18:55:09,641 - octoprint.server.util.sockjs - INFO - User NedSin logged in on the socket from client ::ffff:192.168.0.215 2022-06-26 18:55:10,026 - octoprint.plugins.pi_support - WARNING - Fetching the current throttle state via "" doesn't work 2022-06-26 18:55:17,219 - octoprint.server.util.flask - INFO - Passively logging in user NedSin from ::ffff:192.168.0.215 2022-06-26 18:55:17,245 - octoprint.access.users - INFO - Logged in user: NedSin 2022-06-26 18:55:45,723 - octoprint.server.preemptive_cache - INFO - ... done in 44.70s 2022-06-26 18:55:45,775 - octoprint.server.util.flask - INFO - Passively logging in user NedSin from ::ffff:192.168.0.215 2022-06-26 18:55:45,778 - octoprint.access.users - INFO - Logged in user: NedSin 2022-06-26 18:55:45,967 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.0.215 2022-06-26 18:55:47,276 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.0.215 2022-06-26 18:55:47,403 - octoprint.server.util.flask - INFO - Passively logging in user NedSin from ::ffff:192.168.0.215 2022-06-26 18:55:47,405 - octoprint.access.users - INFO - Logged in user: NedSin 2022-06-26 18:55:53,857 - octoprint.plugins.pi_support - WARNING - Fetching the current throttle state via "" doesn't work 2022-06-26 18:55:55,202 - octoprint.server.util.sockjs - INFO - User NedSin logged in on the socket from client ::ffff:192.168.0.215 2022-06-26 18:56:22,943 - octoprint.plugins.softwareupdate - WARNING - Could not check octoprint for updates due to running into a rate limit: Github rate limit exceeded, reset at 2022-06-26 18:40 2022-06-26 18:56:23,201 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk 2022-06-26 18:56:25,728 - octoprint.plugins.softwareupdate - WARNING - Could not check octoprint for updates due to running into a rate limit: Github rate limit exceeded, reset at 2022-06-26 18:40 2022-06-26 18:56:25,996 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk 2022-06-26 18:56:29,250 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json 2022-06-26 18:56:29,710 - octoprint.plugins.softwareupdate - WARNING - Could not check firmware_check for updates due to running into a rate limit: Github rate limit exceeded, reset at 2022-06-26 18:40 2022-06-26 18:56:29,716 - octoprint.plugins.softwareupdate - WARNING - Could not check MultipleUpload for updates due to running into a rate limit: Github rate limit exceeded, reset at 2022-06-26 18:40 2022-06-26 18:56:29,808 - octoprint.plugins.softwareupdate - WARNING - Could not check BLTouch for updates due to running into a rate limit: Github rate limit exceeded, reset at 2022-06-26 18:40 2022-06-26 18:56:29,822 - octoprint.plugins.softwareupdate - WARNING - Could not check firmwareupdater for updates due to running into a rate limit: Github rate limit exceeded, reset at 2022-06-26 18:40 2022-06-26 18:56:29,827 - octoprint.plugins.softwareupdate - WARNING - Could not check sidebartempgraph for updates due to running into a rate limit: Github rate limit exceeded, reset at 2022-06-26 18:40 2022-06-26 18:56:30,074 - octoprint.plugins.softwareupdate - WARNING - Could not check preheat for updates due to running into a rate limit: Github rate limit exceeded, reset at 2022-06-26 18:40 2022-06-26 18:56:30,169 - octoprint.plugins.softwareupdate - WARNING - Could not check fullscreen for updates due to running into a rate limit: Github rate limit exceeded, reset at 2022-06-26 18:40 2022-06-26 18:56:30,179 - octoprint.plugins.softwareupdate - WARNING - Could not check octoprint for updates due to running into a rate limit: Github rate limit exceeded, reset at 2022-06-26 18:40 2022-06-26 18:56:30,215 - octoprint.plugins.softwareupdate - WARNING - Could not check pause_for_user_event for updates due to running into a rate limit: Github rate limit exceeded, reset at 2022-06-26 18:40 2022-06-26 18:56:30,272 - octoprint.plugins.softwareupdate - WARNING - Could not check CrealityTemperature for updates due to running into a rate limit: Github rate limit exceeded, reset at 2022-06-26 18:40 2022-06-26 18:56:30,385 - octoprint.plugins.softwareupdate - WARNING - Could not check themeify for updates due to running into a rate limit: Github rate limit exceeded, reset at 2022-06-26 18:40 2022-06-26 18:56:30,602 - octoprint.plugins.softwareupdate - WARNING - Could not check autoselect for updates due to running into a rate limit: Github rate limit exceeded, reset at 2022-06-26 18:40 2022-06-26 18:56:30,621 - octoprint.plugins.softwareupdate - WARNING - Could not check thingiverse for updates due to running into a rate limit: Github rate limit exceeded, reset at 2022-06-26 18:40 2022-06-26 18:56:30,677 - octoprint.plugins.softwareupdate - WARNING - Could not check multicam for updates due to running into a rate limit: Github rate limit exceeded, reset at 2022-06-26 18:40 2022-06-26 18:56:30,692 - octoprint.plugins.softwareupdate - WARNING - Could not check webcamSB for updates due to running into a rate limit: Github rate limit exceeded, reset at 2022-06-26 18:40 2022-06-26 18:56:30,788 - octoprint.plugins.softwareupdate - WARNING - Could not check systemcommandeditor for updates due to running into a rate limit: Github rate limit exceeded, reset at 2022-06-26 18:40 2022-06-26 18:56:30,972 - octoprint.plugins.softwareupdate - WARNING - Could not check detailedprogress for updates due to running into a rate limit: Github rate limit exceeded, reset at 2022-06-26 18:40 2022-06-26 18:56:31,031 - octoprint.plugins.softwareupdate - WARNING - Could not check file_check for updates due to running into a rate limit: Github rate limit exceeded, reset at 2022-06-26 18:40 2022-06-26 18:56:31,053 - octoprint.plugins.softwareupdate - WARNING - Could not check tplinksmartplug for updates due to running into a rate limit: Github rate limit exceeded, reset at 2022-06-26 18:40 2022-06-26 18:56:31,140 - octoprint.plugins.softwareupdate - WARNING - Could not check Change_Filament for updates due to running into a rate limit: Github rate limit exceeded, reset at 2022-06-26 18:40 2022-06-26 18:56:31,299 - octoprint.plugins.softwareupdate - WARNING - Could not check navbartemp for updates due to running into a rate limit: Github rate limit exceeded, reset at 2022-06-26 18:40 2022-06-26 18:56:31,348 - octoprint.plugins.softwareupdate - WARNING - Could not check tempsgraph for updates due to running into a rate limit: Github rate limit exceeded, reset at 2022-06-26 18:40 2022-06-26 18:56:31,393 - octoprint.plugins.softwareupdate - WARNING - Could not check PrintTimeGenius for updates due to running into a rate limit: Github rate limit exceeded, reset at 2022-06-26 18:40 2022-06-26 18:56:31,718 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk 2022-06-26 18:56:43,876 - octoprint.plugins.pi_support - WARNING - Fetching the current throttle state via "" doesn't work 2022-06-26 18:57:26,840 - octoprint.plugins.backup - INFO - Creating backup zip at /home/pi/.octoprint/data/backup/.octoprint-backup-20220626-185726.zip (excluded: -)... 2022-06-26 18:57:42,840 - octoprint.server.util.flask - INFO - Passively logging in user NedSin from ::ffff:192.168.0.215 2022-06-26 18:57:42,842 - octoprint.access.users - INFO - Logged in user: NedSin 2022-06-26 18:57:45,209 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.0.215 2022-06-26 18:57:45,396 - octoprint.server.util.flask - INFO - Passively logging in user NedSin from ::ffff:192.168.0.215 2022-06-26 18:57:45,397 - octoprint.access.users - INFO - Logged in user: NedSin 2022-06-26 18:57:52,062 - octoprint.plugins.pi_support - WARNING - Fetching the current throttle state via "" doesn't work 2022-06-26 18:57:53,400 - octoprint.server.util.sockjs - INFO - User NedSin logged in on the socket from client ::ffff:192.168.0.215 2022-06-26 19:00:44,787 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2022-06-26 19:00:44,898 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 1 port/baudrate candidates: /dev/ttyUSB0@250000 2022-06-26 19:00:44,900 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 250000 2022-06-26 19:00:44,903 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 250000 2022-06-26 19:00:44,982 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-06-26 19:00:45,080 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-06-26 19:00:47,098 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2022-06-26 19:00:47,140 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-06-26 19:00:48,046 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2022-06-26 19:00:48,058 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Offline" 2022-06-26 19:00:48,090 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2022-06-26 19:00:57,657 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Opening serial connection" 2022-06-26 19:00:57,678 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 250000 2022-06-26 19:00:57,738 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial connection" to "Connecting" 2022-06-26 19:00:57,749 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-06-26 19:01:00,011 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-06-26 19:01:09,089 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-06-26 19:01:09,098 - octoprint.util.comm - INFO - Changing monitoring state from "Connecting" to "Operational" 2022-06-26 19:01:09,273 - octoprint.plugins.firmwareupdater - INFO - Got CONNECTED event 2022-06-26 19:01:09,285 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-06-26 19:01:09,292 - octoprint.plugins.firmwareupdater - INFO - Run postflash flag is not set 2022-06-26 19:01:09,423 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin bugfix-1.1.x (Github)" 2022-06-26 19:01:09,449 - octoprint.plugins.firmware_check - INFO - Your printer's firmware is a development build of Marlin (build date github). It might be more unstable than a release version and should be kept up-to-date.. More information at https://faq.octoprint.org/warning-firmware-development 2022-06-26 19:01:09,551 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting 2022-06-26 19:01:09,738 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {u'printer_baudrate': 250000, u'printer_port': u'/dev/ttyUSB0', u'firmware_name': u'Marlin bugfix-1.1.x (Github)'} 2022-06-26 19:01:10,372 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting 2022-06-26 19:01:10,867 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting 2022-06-26 19:01:21,748 - octoprint.plugins.backup - INFO - Creating backup zip at /home/pi/.octoprint/data/backup/.octoprint-backup-20220626-190121.zip (excluded: timelapse,timelapse_tmp)... 2022-06-26 19:05:32,932 - octoprint.plugins.backup - INFO - ... done creating backup zip. 2022-06-26 19:06:38,508 - octoprint.plugins.backup - INFO - Creating backup zip at /home/pi/.octoprint/data/backup/.octoprint-backup-20220626-190638.zip (excluded: -)...