2020-07-20 12:52:08,502 - serial.log is currently not enabled, you can enable it via Settings > Serial Connection > Log communication to serial.log
2020-07-21 07:01:33,375 - Enabling serial logging
2020-07-21 07:01:35,992 - Send: M105
2020-07-21 07:01:36,004 - Recv: ok T:23.5 /0.0 B:24.6 /0.0 T0:23.5 /0.0 @:0 B@:0 P:25.2 A:32.1
2020-07-21 07:01:40,994 - Send: M105
2020-07-21 07:01:41,006 - Recv: ok T:23.3 /0.0 B:24.5 /0.0 T0:23.3 /0.0 @:0 B@:0 P:25.1 A:32.4
2020-07-21 07:01:46,001 - Send: M105
2020-07-21 07:01:46,014 - Recv: ok T:23.4 /0.0 B:24.8 /0.0 T0:23.4 /0.0 @:0 B@:0 P:25.2 A:32.4
2020-07-21 07:01:51,003 - Send: M105
2020-07-21 07:01:51,019 - Recv: ok T:23.4 /0.0 B:24.6 /0.0 T0:23.4 /0.0 @:0 B@:0 P:25.2 A:32.3
2020-07-21 07:01:56,007 - Send: M105
2020-07-21 07:01:56,019 - Recv: ok T:23.5 /0.0 B:24.5 /0.0 T0:23.5 /0.0 @:0 B@:0 P:25.2 A:32.0
2020-07-21 07:02:01,010 - Send: M105
2020-07-21 07:02:01,022 - Recv: ok T:23.5 /0.0 B:24.7 /0.0 T0:23.5 /0.0 @:0 B@:0 P:25.2 A:32.2
2020-07-21 07:02:06,012 - Send: M105
2020-07-21 07:02:06,027 - Recv: ok T:23.6 /0.0 B:24.8 /0.0 T0:23.6 /0.0 @:0 B@:0 P:25.2 A:32.2
2020-07-21 07:02:11,028 - Send: M105
2020-07-21 07:02:11,039 - Recv: ok T:23.6 /0.0 B:24.7 /0.0 T0:23.6 /0.0 @:0 B@:0 P:25.2 A:32.3
2020-07-21 07:02:16,025 - Send: M105
2020-07-21 07:02:16,037 - Recv: ok T:23.5 /0.0 B:24.6 /0.0 T0:23.5 /0.0 @:0 B@:0 P:25.2 A:32.4
2020-07-21 07:02:21,028 - Send: M105
2020-07-21 07:02:21,043 - Recv: ok T:23.5 /0.0 B:24.6 /0.0 T0:23.5 /0.0 @:0 B@:0 P:25.2 A:32.3
2020-07-21 07:02:26,031 - Send: M105
2020-07-21 07:02:26,045 - Recv: ok T:23.6 /0.0 B:24.5 /0.0 T0:23.6 /0.0 @:0 B@:0 P:25.2 A:32.5
2020-07-21 07:02:31,034 - Send: M105
2020-07-21 07:02:31,046 - Recv: ok T:23.5 /0.0 B:24.7 /0.0 T0:23.5 /0.0 @:0 B@:0 P:25.2 A:32.4
2020-07-21 07:02:36,036 - Send: M105
2020-07-21 07:02:36,048 - Recv: ok T:23.5 /0.0 B:24.3 /0.0 T0:23.5 /0.0 @:0 B@:0 P:25.2 A:32.2
2020-07-21 07:02:41,040 - Send: M105
2020-07-21 07:02:41,051 - Recv: ok T:23.6 /0.0 B:24.6 /0.0 T0:23.6 /0.0 @:0 B@:0 P:25.2 A:32.4
2020-07-21 07:02:46,042 - Send: M105
2020-07-21 07:02:46,056 - Recv: ok T:23.5 /0.0 B:24.5 /0.0 T0:23.5 /0.0 @:0 B@:0 P:25.2 A:32.1
2020-07-21 07:02:51,045 - Send: M105
2020-07-21 07:02:51,061 - Recv: ok T:23.5 /0.0 B:24.6 /0.0 T0:23.5 /0.0 @:0 B@:0 P:25.3 A:32.2
2020-07-21 07:02:56,057 - Send: M105
2020-07-21 07:02:56,068 - Recv: ok T:23.6 /0.0 B:24.7 /0.0 T0:23.6 /0.0 @:0 B@:0 P:25.2 A:32.3
2020-07-21 07:03:01,059 - Send: M105
2020-07-21 07:03:01,073 - Recv: ok T:23.5 /0.0 B:24.5 /0.0 T0:23.5 /0.0 @:0 B@:0 P:25.3 A:32.5
2020-07-21 07:03:06,062 - Send: M105
2020-07-21 07:03:06,075 - Recv: ok T:23.4 /0.0 B:24.7 /0.0 T0:23.4 /0.0 @:0 B@:0 P:25.2 A:32.2
2020-07-21 07:03:11,064 - Send: M105
2020-07-21 07:03:11,079 - Recv: ok T:23.5 /0.0 B:24.7 /0.0 T0:23.5 /0.0 @:0 B@:0 P:25.3 A:32.5
2020-07-21 07:03:16,067 - Send: M105
2020-07-21 07:03:16,080 - Recv: ok T:23.2 /0.0 B:24.8 /0.0 T0:23.2 /0.0 @:0 B@:0 P:25.2 A:32.0
2020-07-21 07:03:21,070 - Send: M105
2020-07-21 07:03:21,083 - Recv: ok T:23.5 /0.0 B:24.5 /0.0 T0:23.5 /0.0 @:0 B@:0 P:25.3 A:32.3
2020-07-21 07:03:26,073 - Send: M105
2020-07-21 07:03:26,084 - Recv: ok T:23.6 /0.0 B:24.6 /0.0 T0:23.6 /0.0 @:0 B@:0 P:25.3 A:32.2
2020-07-21 07:03:31,078 - Send: M105
2020-07-21 07:03:31,092 - Recv: ok T:23.6 /0.0 B:24.9 /0.0 T0:23.6 /0.0 @:0 B@:0 P:25.2 A:32.3
2020-07-21 07:03:36,083 - Send: M105
2020-07-21 07:03:36,097 - Recv: ok T:23.5 /0.0 B:24.6 /0.0 T0:23.5 /0.0 @:0 B@:0 P:25.2 A:32.7
2020-07-21 07:03:41,086 - Send: M105
2020-07-21 07:03:41,099 - Recv: ok T:23.5 /0.0 B:24.6 /0.0 T0:23.5 /0.0 @:0 B@:0 P:25.2 A:32.1
2020-07-21 07:03:46,088 - Send: M105
2020-07-21 07:03:46,100 - Recv: ok T:23.6 /0.0 B:24.8 /0.0 T0:23.6 /0.0 @:0 B@:0 P:25.2 A:32.6
2020-07-21 07:03:51,091 - Send: M105
2020-07-21 07:03:51,103 - Recv: ok T:23.6 /0.0 B:24.8 /0.0 T0:23.6 /0.0 @:0 B@:0 P:25.3 A:32.3
2020-07-21 07:03:56,093 - Send: M105
2020-07-21 07:03:56,105 - Recv: ok T:23.6 /0.0 B:24.7 /0.0 T0:23.6 /0.0 @:0 B@:0 P:25.2 A:32.3
2020-07-21 07:04:01,103 - Send: M105
2020-07-21 07:04:01,116 - Recv: ok T:23.6 /0.0 B:24.5 /0.0 T0:23.6 /0.0 @:0 B@:0 P:25.2 A:32.4
2020-07-21 07:04:06,106 - Send: M105
2020-07-21 07:04:06,118 - Recv: ok T:23.6 /0.0 B:24.5 /0.0 T0:23.6 /0.0 @:0 B@:0 P:25.2 A:32.2
2020-07-21 07:04:11,108 - Send: M105
2020-07-21 07:04:11,120 - Recv: ok T:23.5 /0.0 B:24.5 /0.0 T0:23.5 /0.0 @:0 B@:0 P:25.2 A:32.0
2020-07-21 07:04:16,111 - Send: M105
2020-07-21 07:04:16,122 - Recv: ok T:23.6 /0.0 B:24.5 /0.0 T0:23.6 /0.0 @:0 B@:0 P:25.2 A:32.1
2020-07-21 07:04:21,116 - Send: M105
2020-07-21 07:04:21,128 - Recv: ok T:23.4 /0.0 B:24.7 /0.0 T0:23.4 /0.0 @:0 B@:0 P:25.3 A:32.4
2020-07-21 07:04:26,118 - Send: M105
2020-07-21 07:04:26,128 - Recv: ok T:23.6 /0.0 B:24.6 /0.0 T0:23.6 /0.0 @:0 B@:0 P:25.3 A:32.1
2020-07-21 07:04:31,121 - Send: M105
2020-07-21 07:04:31,132 - Recv: ok T:23.6 /0.0 B:24.5 /0.0 T0:23.6 /0.0 @:0 B@:0 P:25.2 A:32.2
2020-07-21 07:04:36,123 - Send: M105
2020-07-21 07:04:36,133 - Recv: ok T:23.6 /0.0 B:24.7 /0.0 T0:23.6 /0.0 @:0 B@:0 P:25.3 A:32.4
2020-07-21 07:04:41,126 - Send: M105
2020-07-21 07:04:41,139 - Recv: ok T:23.7 /0.0 B:24.6 /0.0 T0:23.7 /0.0 @:0 B@:0 P:25.3 A:32.2
2020-07-21 07:04:46,129 - Send: M105
2020-07-21 07:04:46,140 - Recv: ok T:23.5 /0.0 B:24.6 /0.0 T0:23.5 /0.0 @:0 B@:0 P:25.2 A:32.5
2020-07-21 07:04:51,131 - Send: M105
2020-07-21 07:04:51,144 - Recv: ok T:23.6 /0.0 B:24.8 /0.0 T0:23.6 /0.0 @:0 B@:0 P:25.2 A:32.4
2020-07-21 07:04:56,137 - Send: M105
2020-07-21 07:04:56,150 - Recv: ok T:23.6 /0.0 B:24.8 /0.0 T0:23.6 /0.0 @:0 B@:0 P:25.3 A:32.4
2020-07-21 07:05:01,146 - Send: M105
2020-07-21 07:05:01,160 - Recv: ok T:23.5 /0.0 B:24.6 /0.0 T0:23.5 /0.0 @:0 B@:0 P:25.2 A:32.3
2020-07-21 07:05:06,150 - Send: M105
2020-07-21 07:05:06,165 - Recv: ok T:23.6 /0.0 B:24.8 /0.0 T0:23.6 /0.0 @:0 B@:0 P:25.3 A:32.7
2020-07-21 07:05:11,153 - Send: M105
2020-07-21 07:05:11,165 - Recv: ok T:23.7 /0.0 B:24.5 /0.0 T0:23.7 /0.0 @:0 B@:0 P:25.2 A:32.1
2020-07-21 07:05:16,157 - Send: M105
2020-07-21 07:05:16,170 - Recv: ok T:23.4 /0.0 B:24.8 /0.0 T0:23.4 /0.0 @:0 B@:0 P:25.3 A:32.2
2020-07-21 07:05:21,167 - Send: M105
2020-07-21 07:05:21,175 - Recv: ok T:23.5 /0.0 B:24.7 /0.0 T0:23.5 /0.0 @:0 B@:0 P:25.3 A:32.5
2020-07-21 07:05:26,162 - Send: M105
2020-07-21 07:05:26,175 - Recv: ok T:23.5 /0.0 B:24.8 /0.0 T0:23.5 /0.0 @:0 B@:0 P:25.2 A:32.3
2020-07-21 07:05:31,165 - Send: M105
2020-07-21 07:05:31,179 - Recv: ok T:23.5 /0.0 B:24.5 /0.0 T0:23.5 /0.0 @:0 B@:0 P:25.2 A:32.3
2020-07-21 07:05:36,167 - Send: M105
2020-07-21 07:05:36,181 - Recv: ok T:23.4 /0.0 B:24.9 /0.0 T0:23.4 /0.0 @:0 B@:0 P:25.2 A:32.7
2020-07-21 07:05:41,171 - Send: M105
2020-07-21 07:05:41,183 - Recv: ok T:23.6 /0.0 B:24.9 /0.0 T0:23.6 /0.0 @:0 B@:0 P:25.3 A:32.3
2020-07-21 07:05:46,174 - Send: M105
2020-07-21 07:05:46,185 - Recv: ok T:23.3 /0.0 B:24.7 /0.0 T0:23.3 /0.0 @:0 B@:0 P:25.3 A:32.3
2020-07-21 07:05:51,178 - Send: M105
2020-07-21 07:05:51,192 - Recv: ok T:23.4 /0.0 B:24.6 /0.0 T0:23.4 /0.0 @:0 B@:0 P:25.3 A:32.4
2020-07-21 07:05:56,188 - Send: M105
2020-07-21 07:05:56,199 - Recv: ok T:23.7 /0.0 B:25.0 /0.0 T0:23.7 /0.0 @:0 B@:0 P:25.3 A:32.5
2020-07-21 07:06:01,192 - Send: M105
2020-07-21 07:06:01,206 - Recv: ok T:23.6 /0.0 B:24.6 /0.0 T0:23.6 /0.0 @:0 B@:0 P:25.2 A:32.2
2020-07-21 07:06:06,195 - Send: M105
2020-07-21 07:06:06,209 - Recv: ok T:23.5 /0.0 B:24.9 /0.0 T0:23.5 /0.0 @:0 B@:0 P:25.3 A:32.6
2020-07-21 07:06:11,198 - Send: M105
2020-07-21 07:06:11,210 - Recv: ok T:23.5 /0.0 B:24.5 /0.0 T0:23.5 /0.0 @:0 B@:0 P:25.3 A:32.7
2020-07-21 07:06:16,200 - Send: M105
2020-07-21 07:06:16,212 - Recv: ok T:23.6 /0.0 B:24.6 /0.0 T0:23.6 /0.0 @:0 B@:0 P:25.3 A:32.1
2020-07-21 07:06:21,203 - Send: M105
2020-07-21 07:06:21,215 - Recv: ok T:23.5 /0.0 B:24.8 /0.0 T0:23.5 /0.0 @:0 B@:0 P:25.3 A:32.4
2020-07-21 07:06:26,205 - Send: M105
2020-07-21 07:06:26,221 - Recv: ok T:23.5 /0.0 B:24.8 /0.0 T0:23.5 /0.0 @:0 B@:0 P:25.3 A:32.5
2020-07-21 07:06:31,208 - Send: M105
2020-07-21 07:06:31,220 - Recv: ok T:23.7 /0.0 B:24.7 /0.0 T0:23.7 /0.0 @:0 B@:0 P:25.3 A:32.2
2020-07-21 07:06:36,212 - Send: M105
2020-07-21 07:06:36,227 - Recv: ok T:23.6 /0.0 B:24.8 /0.0 T0:23.6 /0.0 @:0 B@:0 P:25.3 A:32.4
2020-07-21 07:06:41,215 - Send: M105
2020-07-21 07:06:41,232 - Recv: ok T:23.7 /0.0 B:24.6 /0.0 T0:23.7 /0.0 @:0 B@:0 P:25.3 A:32.3
2020-07-21 07:06:46,219 - Send: M105
2020-07-21 07:06:46,233 - Recv: ok T:23.6 /0.0 B:24.8 /0.0 T0:23.6 /0.0 @:0 B@:0 P:25.3 A:32.3
2020-07-21 07:06:51,221 - Send: M105
2020-07-21 07:06:51,236 - Recv: ok T:23.6 /0.0 B:24.7 /0.0 T0:23.6 /0.0 @:0 B@:0 P:25.3 A:32.2
2020-07-21 07:06:56,224 - Send: M105
2020-07-21 07:06:59,964 - Communication timeout while idle, trying to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
2020-07-21 07:06:59,977 - Recv: echo: 3.9.0-3421
2020-07-21 07:06:59,988 - WARNThe received line contains at least one null byte character at position 0, this hints at some data corruption going on
2020-07-21 07:06:59,992 - Recv: echo: Last Updated: May 18 2020 17:11:15 | Author: (none, default config)
2020-07-21 07:06:59,995 - Recv: Compiled: May 18 2020
2020-07-21 07:06:59,998 - Recv: echo: Free Memory: 1675  PlannerBufferBytes: 1792
2020-07-21 07:07:00,001 - Recv: echo:Stored settings retrieved
2020-07-21 07:07:00,004 - Recv: adc_init
2020-07-21 07:07:00,318 - Recv: CrashDetect ENABLED!
2020-07-21 07:07:01,227 - Send: M105
2020-07-21 07:07:01,417 - Recv: FSensor ENABLED (sensor board revision: 0.3 or older)
2020-07-21 07:07:01,605 - Recv: Sending 0xFF
2020-07-21 07:07:01,616 - Recv: echo:SD card ok
2020-07-21 07:07:02,066 - Recv: echo:busy: processing
2020-07-21 07:07:03,374 - Recv: ok T:23.6 /0.0 B:24.6 /0.0 T0:23.6 /0.0 @:0 B@:0 P:98.7 A:32.3
2020-07-21 07:07:04,764 - Recv: MMU => 'start'
2020-07-21 07:07:04,776 - Recv: MMU <= 'S1'
2020-07-21 07:07:06,231 - Send: M105
2020-07-21 07:07:06,242 - Recv: ok T:23.9 /0.0 B:25.0 /0.0 T0:23.9 /0.0 @:0 B@:0 P:31.2 A:32.5
2020-07-21 07:07:11,235 - Send: M105
2020-07-21 07:07:13,985 - Communication timeout while idle, trying to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
2020-07-21 07:07:13,990 - Recv: echo: 3.9.0-3421
2020-07-21 07:07:14,008 - WARNThe received line contains at least one null byte character at position 0, this hints at some data corruption going on
2020-07-21 07:07:14,016 - Recv: echo: Last Updated: May 18 2020 17:11:15 | Author: (none, default config)
2020-07-21 07:07:14,018 - Recv: Compiled: May 18 2020
2020-07-21 07:07:14,021 - Recv: echo: Free Memory: 1675  PlannerBufferBytes: 1792
2020-07-21 07:07:14,023 - Recv: echo:Stored settings retrieved
2020-07-21 07:07:14,026 - Recv: adc_init
2020-07-21 07:07:14,340 - Recv: CrashDetect ENABLED!
2020-07-21 07:07:15,438 - Recv: FSensor ENABLED (sensor board revision: 0.3 or older)
2020-07-21 07:07:15,626 - Recv: Sending 0xFF
2020-07-21 07:07:15,637 - Recv: echo:SD card ok
2020-07-21 07:07:16,087 - Recv: echo:busy: processing
2020-07-21 07:07:16,237 - Send: M105
2020-07-21 07:07:17,396 - Recv: ok T:23.7 /0.0 B:24.8 /0.0 T0:23.7 /0.0 @:0 B@:0 P:98.6 A:32.4
2020-07-21 07:07:18,785 - Recv: MMU => 'start'
2020-07-21 07:07:18,788 - Recv: MMU <= 'S1'
2020-07-21 07:07:21,241 - Send: M105
2020-07-21 07:07:21,253 - Recv: ok T:23.3 /0.0 B:24.4 /0.0 T0:23.3 /0.0 @:0 B@:0 P:27.2 A:32.4
2020-07-21 07:07:26,243 - Send: M105
2020-07-21 07:07:26,257 - Recv: ok T:23.6 /0.0 B:24.7 /0.0 T0:23.6 /0.0 @:0 B@:0 P:25.3 A:32.7
2020-07-21 07:07:30,972 - Recv: echo: 3.9.0-3421
2020-07-21 07:07:30,987 - WARNThe received line contains at least one null byte character at position 0, this hints at some data corruption going on
2020-07-21 07:07:30,995 - Recv: echo: Last Updated: May 18 2020 17:11:15 | Author: (none, default config)
2020-07-21 07:07:30,999 - Recv: Compiled: May 18 2020
2020-07-21 07:07:31,002 - Recv: echo: Free Memory: 1675  PlannerBufferBytes: 1792
2020-07-21 07:07:31,005 - Recv: echo:Stored settings retrieved
2020-07-21 07:07:31,008 - Recv: adc_init
2020-07-21 07:07:31,247 - Send: M105
2020-07-21 07:07:35,885 - Recv: echo: 3.9.0-3421
2020-07-21 07:07:35,903 - WARNThe received line contains at least one null byte character at position 0, this hints at some data corruption going on
2020-07-21 07:07:35,910 - Recv: echo: Last Updated: May 18 2020 17:11:15 | Author: (none, default config)
2020-07-21 07:07:35,913 - Recv: Compiled: May 18 2020
2020-07-21 07:07:35,915 - Recv: echo: Free Memory: 1675  PlannerBufferBytes: 1792
2020-07-21 07:07:35,918 - Recv: echo:Stored settings retrieved
2020-07-21 07:07:35,920 - Recv: adc_init
2020-07-21 07:07:36,241 - Recv: CrashDetect ENABLED!
2020-07-21 07:07:37,339 - Recv: FSensor ENABLED (sensor board revision: 0.3 or older)
2020-07-21 07:07:37,527 - Recv: Sending 0xFF
2020-07-21 07:07:37,538 - Recv: echo:SD card ok
2020-07-21 07:07:37,989 - Recv: echo:busy: processing
2020-07-21 07:07:40,686 - Recv: MMU => 'start'
2020-07-21 07:07:40,693 - Recv: MMU <= 'S1'
2020-07-21 07:07:48,246 - Communication timeout while idle, trying to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
2020-07-21 07:07:48,258 - Send: M105
2020-07-21 07:07:48,985 - Recv: echo: 3.9.0-3421
2020-07-21 07:07:48,994 - WARNThe received line contains at least one null byte character at position 0, this hints at some data corruption going on
2020-07-21 07:07:48,998 - Recv: echo: Last Updated: May 18 2020 17:11:15 | Author: (none, default config)
2020-07-21 07:07:49,000 - Recv: Compiled: May 18 2020
2020-07-21 07:07:49,003 - Recv: echo: Free Memory: 1675  PlannerBufferBytes: 1792
2020-07-21 07:07:49,005 - Recv: echo:Stored settings retrieved
2020-07-21 07:07:49,008 - Recv: adc_init
2020-07-21 07:07:49,340 - Recv: CrashDetect ENABLED!
2020-07-21 07:07:54,958 - Recv: echo: 3.9.0-3421
2020-07-21 07:07:54,977 - WARNThe received line contains at least one null byte character at position 0, this hints at some data corruption going on
2020-07-21 07:07:54,983 - Recv: echo: Last Updated: May 18 2020 17:11:15 | Author: (none, default config)
2020-07-21 07:07:54,985 - Recv: Compiled: May 18 2020
2020-07-21 07:07:54,987 - Recv: echo: Free Memory: 1675  PlannerBufferBytes: 1792
2020-07-21 07:07:54,990 - Recv: echo:Stored settings retrieved
2020-07-21 07:07:54,993 - Recv: adc_init
2020-07-21 07:07:55,314 - Recv: CrashDetect ENABLED!
2020-07-21 07:07:56,412 - Recv: FSensor ENABLED (sensor board revision: 0.3 or older)
2020-07-21 07:07:56,600 - Recv: Sending 0xFF
2020-07-21 07:07:56,611 - Recv: echo:SD card ok
2020-07-21 07:07:57,062 - Recv: echo:busy: processing
2020-07-21 07:07:59,759 - Recv: MMU => 'start'
2020-07-21 07:07:59,770 - Recv: MMU <= 'S1'
2020-07-21 07:08:06,896 - Communication timeout while idle, trying to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
2020-07-21 07:08:06,901 - Send: M105
2020-07-21 07:08:06,911 - Recv: echo: 3.9.0-3421
2020-07-21 07:08:06,922 - WARNThe received line contains at least one null byte character at position 0, this hints at some data corruption going on
2020-07-21 07:08:06,928 - Recv: echo: Last Updated: May 18 2020 17:11:15 | Author: (none, default config)
2020-07-21 07:08:06,931 - Recv: Compiled: May 18 2020
2020-07-21 07:08:06,933 - Recv: echo: Free Memory: 1675  PlannerBufferBytes: 1792
2020-07-21 07:08:06,936 - Recv: echo:Stored settings retrieved
2020-07-21 07:08:06,938 - Recv: adc_init
2020-07-21 07:08:07,250 - Recv: CrashDetect ENABLED!
2020-07-21 07:08:08,349 - Recv: FSensor ENABLED (sensor board revision: 0.3 or older)
2020-07-21 07:08:08,537 - Recv: Sending 0xFF
2020-07-21 07:08:08,548 - Recv: echo:SD card ok
2020-07-21 07:08:08,998 - Recv: echo:busy: processing
2020-07-21 07:08:10,306 - Recv: ok T:23.7 /0.0 B:24.5 /0.0 T0:23.7 /0.0 @:0 B@:0 P:98.6 A:32.2
2020-07-21 07:08:11,266 - Send: M105
2020-07-21 07:08:11,282 - Recv: ok T:23.2 /0.0 B:24.4 /0.0 T0:23.2 /0.0 @:0 B@:0 P:61.0 A:32.6
2020-07-21 07:08:11,696 - Recv: MMU => 'start'
2020-07-21 07:08:11,698 - Recv: MMU <= 'S1'
2020-07-21 07:08:16,269 - Send: M105
2020-07-21 07:08:16,282 - Recv: ok T:23.9 /0.0 B:25.2 /0.0 T0:23.9 /0.0 @:0 B@:0 P:25.5 A:32.5
2020-07-21 07:08:21,271 - Send: M105
2020-07-21 07:08:22,041 - Recv: echo: 3.9.0-3421
2020-07-21 07:08:22,063 - WARNThe received line contains at least one null byte character at position 0, this hints at some data corruption going on
2020-07-21 07:08:22,067 - Recv: echo: Last Updated: May 18 2020 17:11:15 | Author: (none, default config)
2020-07-21 07:08:22,069 - Recv: Compiled: May 18 2020
2020-07-21 07:08:22,070 - Recv: echo: Free Memory: 1675  PlannerBufferBytes: 1792
2020-07-21 07:08:22,072 - Recv: echo:Stored settings retrieved
2020-07-21 07:08:22,074 - Recv: adc_init
2020-07-21 07:08:22,397 - Recv: CrashDetect ENABLED!
2020-07-21 07:08:23,495 - Recv: FSensor ENABLED (sensor board revision: 0.3 or older)
2020-07-21 07:08:23,683 - Recv: Sending 0xFF
2020-07-21 07:08:23,694 - Recv: echo:SD card ok
2020-07-21 07:08:24,145 - Recv: echo:busy: processing
2020-07-21 07:08:26,842 - Recv: MMU => 'start'
2020-07-21 07:08:26,855 - Recv: MMU <= 'S1'
2020-07-21 07:08:32,863 - Communication timeout while idle, trying to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
2020-07-21 07:08:32,875 - Send: M105
2020-07-21 07:08:32,883 - Recv: ok T:23.7 /0.0 B:24.9 /0.0 T0:23.7 /0.0 @:0 B@:0 P:25.4 A:32.3
2020-07-21 07:08:36,278 - Send: M105
2020-07-21 07:08:39,210 - Communication timeout while idle, trying to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
2020-07-21 07:08:41,281 - Send: M105
2020-07-21 07:08:41,896 - Recv: echo: 3.9.0-3421
2020-07-21 07:08:41,917 - WARNThe received line contains at least one null byte character at position 0, this hints at some data corruption going on
2020-07-21 07:08:41,920 - Recv: echo: Last Updated: May 18 2020 17:11:15 | Author: (none, default config)
2020-07-21 07:08:41,923 - Recv: Compiled: May 18 2020
2020-07-21 07:08:41,926 - Recv: echo: Free Memory: 1675  PlannerBufferBytes: 1792
2020-07-21 07:08:41,929 - Recv: echo:Stored settings retrieved
2020-07-21 07:08:41,932 - Recv: adc_init
2020-07-21 07:08:42,251 - Recv: CrashDetect ENABLED!
2020-07-21 07:08:43,350 - Recv: FSensor ENABLED (sensor board revision: 0.3 or older)
2020-07-21 07:08:43,538 - Recv: Sending 0xFF
2020-07-21 07:08:43,549 - Recv: echo:SD card ok
2020-07-21 07:08:43,999 - Recv: echo:busy: processing
2020-07-21 07:08:46,697 - Recv: MMU => 'start'
2020-07-21 07:08:46,709 - Recv: MMU <= 'S1'
2020-07-21 07:08:52,722 - Communication timeout while idle, trying to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
2020-07-21 07:08:52,734 - Send: M105
2020-07-21 07:08:52,743 - Recv: ok T:23.7 /0.0 B:24.8 /0.0 T0:23.7 /0.0 @:0 B@:0 P:25.4 A:32.4
2020-07-21 07:08:55,376 - Recv: MMU => '106ok'
2020-07-21 07:08:55,386 - Recv: MMU <= 'S2'
2020-07-21 07:08:55,392 - Recv: MMU => '372ok'
2020-07-21 07:08:55,395 - Recv: MMU version valid
2020-07-21 07:08:55,397 - Recv: MMU - ENABLED
2020-07-21 07:08:56,289 - Send: M105
2020-07-21 07:08:56,297 - Recv: ok T:23.6 /0.0 B:24.8 /0.0 T0:23.6 /0.0 @:0 B@:0 P:25.3 A:32.5
2020-07-21 07:09:01,296 - Send: M105
2020-07-21 07:09:01,323 - Recv: ok T:23.7 /0.0 B:24.8 /0.0 T0:23.7 /0.0 @:0 B@:0 P:25.4 A:32.4
2020-07-21 07:09:06,294 - Send: M105
2020-07-21 07:09:06,306 - Recv: ok T:23.9 /0.0 B:24.9 /0.0 T0:23.9 /0.0 @:0 B@:0 P:25.3 A:32.4
2020-07-21 07:09:11,297 - Send: M105
2020-07-21 07:09:11,305 - Recv: ok T:23.6 /0.0 B:25.0 /0.0 T0:23.6 /0.0 @:0 B@:0 P:25.4 A:32.3
2020-07-21 07:09:16,299 - Send: M105
2020-07-21 07:09:16,312 - Recv: ok T:23.7 /0.0 B:25.0 /0.0 T0:23.7 /0.0 @:0 B@:0 P:25.3 A:32.4
2020-07-21 07:09:21,302 - Send: M105
2020-07-21 07:09:21,315 - Recv: ok T:23.7 /0.0 B:24.9 /0.0 T0:23.7 /0.0 @:0 B@:0 P:25.4 A:32.6
2020-07-21 07:09:26,304 - Send: M105
2020-07-21 07:09:26,316 - Recv: ok T:23.6 /0.0 B:24.8 /0.0 T0:23.6 /0.0 @:0 B@:0 P:25.4 A:32.6
2020-07-21 07:09:31,307 - Send: M105
2020-07-21 07:09:31,318 - Recv: ok T:23.8 /0.0 B:24.9 /0.0 T0:23.8 /0.0 @:0 B@:0 P:25.4 A:32.7
2020-07-21 07:09:36,309 - Send: M105
2020-07-21 07:09:36,322 - Recv: ok T:23.8 /0.0 B:24.8 /0.0 T0:23.8 /0.0 @:0 B@:0 P:25.4 A:32.2
2020-07-21 07:09:41,312 - Send: M105
2020-07-21 07:09:41,325 - Recv: ok T:23.7 /0.0 B:24.8 /0.0 T0:23.7 /0.0 @:0 B@:0 P:25.4 A:32.7
2020-07-21 07:09:46,316 - Send: M105
2020-07-21 07:09:46,327 - Recv: ok T:23.7 /0.0 B:25.0 /0.0 T0:23.7 /0.0 @:0 B@:0 P:25.4 A:32.5
2020-07-21 07:09:51,318 - Send: M105
2020-07-21 07:09:51,330 - Recv: ok T:23.7 /0.0 B:24.8 /0.0 T0:23.7 /0.0 @:0 B@:0 P:25.4 A:32.5
2020-07-21 07:09:56,320 - Send: M105
2020-07-21 07:09:56,332 - Recv: ok T:24.0 /0.0 B:25.1 /0.0 T0:24.0 /0.0 @:0 B@:0 P:25.4 A:32.6
2020-07-21 07:10:01,334 - Send: M105
2020-07-21 07:10:01,345 - Recv: ok T:23.8 /0.0 B:24.8 /0.0 T0:23.8 /0.0 @:0 B@:0 P:25.3 A:32.4
2020-07-21 07:10:06,338 - Send: M105
2020-07-21 07:10:06,349 - Recv: ok T:23.8 /0.0 B:24.7 /0.0 T0:23.8 /0.0 @:0 B@:0 P:25.3 A:32.3
2020-07-21 07:10:11,340 - Send: M105
2020-07-21 07:10:11,352 - Recv: ok T:23.7 /0.0 B:24.8 /0.0 T0:23.7 /0.0 @:0 B@:0 P:25.4 A:32.3
2020-07-21 07:10:16,345 - Send: M105
2020-07-21 07:10:19,942 - Communication timeout while idle, trying to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
2020-07-21 07:10:19,949 - Recv: echo: 3.9.0-3421
2020-07-21 07:10:19,963 - WARNThe received line contains at least one null byte character at position 0, this hints at some data corruption going on
2020-07-21 07:10:19,970 - Recv: echo: Last Updated: May 18 2020 17:11:15 | Author: (none, default config)
2020-07-21 07:10:19,972 - Recv: Compiled: May 18 2020
2020-07-21 07:10:19,975 - Recv: echo: Free Memory: 1675  PlannerBufferBytes: 1792
2020-07-21 07:10:19,977 - Recv: echo:Stored settings retrieved
2020-07-21 07:10:19,979 - Recv: adc_init
2020-07-21 07:10:20,296 - Recv: CrashDetect ENABLED!
2020-07-21 07:10:21,348 - Send: M105
2020-07-21 07:10:21,394 - Recv: FSensor ENABLED (sensor board revision: 0.3 or older)
2020-07-21 07:10:21,582 - Recv: Sending 0xFF
2020-07-21 07:10:21,593 - Recv: echo:SD card ok
2020-07-21 07:10:22,043 - Recv: echo:busy: processing
2020-07-21 07:10:23,351 - Recv: ok T:23.7 /0.0 B:24.9 /0.0 T0:23.7 /0.0 @:0 B@:0 P:98.7 A:32.2
2020-07-21 07:10:24,741 - Recv: MMU => 'start'
2020-07-21 07:10:24,751 - Recv: MMU <= 'S1'
2020-07-21 07:10:26,350 - Send: M105
2020-07-21 07:10:26,363 - Recv: ok T:23.6 /0.0 B:24.4 /0.0 T0:23.6 /0.0 @:0 B@:0 P:29.8 A:32.1
2020-07-21 07:10:31,353 - Send: M105
2020-07-21 07:10:31,364 - Recv: ok T:23.8 /0.0 B:24.9 /0.0 T0:23.8 /0.0 @:0 B@:0 P:25.4 A:32.5
2020-07-21 07:10:33,420 - Recv: MMU => '106ok'
2020-07-21 07:10:33,431 - Recv: MMU <= 'S2'
2020-07-21 07:10:33,436 - Recv: MMU => '372ok'
2020-07-21 07:10:33,439 - Recv: MMU version valid
2020-07-21 07:10:33,441 - Recv: MMU - ENABLED
2020-07-21 07:10:36,355 - Send: M105
2020-07-21 07:10:40,922 - Communication timeout while idle, trying to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
2020-07-21 07:10:40,934 - Recv: echo: 3.9.0-3421
2020-07-21 07:10:40,946 - WARNThe received line contains at least one null byte character at position 0, this hints at some data corruption going on
2020-07-21 07:10:40,949 - Recv: echo: Last Updated: May 18 2020 17:11:15 | Author: (none, default config)
2020-07-21 07:10:40,952 - Recv: Compiled: May 18 2020
2020-07-21 07:10:40,954 - Recv: echo: Free Memory: 1675  PlannerBufferBytes: 1792
2020-07-21 07:10:40,957 - Recv: echo:Stored settings retrieved
2020-07-21 07:10:40,959 - Recv: adc_init
2020-07-21 07:10:41,276 - Recv: CrashDetect ENABLED!
2020-07-21 07:10:41,357 - Send: M105
2020-07-21 07:10:42,374 - Recv: FSensor ENABLED (sensor board revision: 0.3 or older)
2020-07-21 07:10:42,562 - Recv: Sending 0xFF
2020-07-21 07:10:42,573 - Recv: echo:SD card ok
2020-07-21 07:10:43,024 - Recv: echo:busy: processing
2020-07-21 07:10:44,332 - Recv: ok T:23.8 /0.0 B:24.6 /0.0 T0:23.8 /0.0 @:0 B@:0 P:98.7 A:32.2
2020-07-21 07:10:45,721 - Recv: MMU => 'start'
2020-07-21 07:10:45,732 - Recv: MMU <= 'S1'
2020-07-21 07:10:46,360 - Send: M105
2020-07-21 07:10:46,368 - Recv: ok T:24.2 /0.0 B:25.2 /0.0 T0:24.2 /0.0 @:0 B@:0 P:38.0 A:32.2
2020-07-21 07:10:51,363 - Send: M105
2020-07-21 07:10:53,920 - Communication timeout while idle, trying to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
2020-07-21 07:10:53,927 - Recv: echo: 3.9.0-3421
2020-07-21 07:10:53,944 - WARNThe received line contains at least one null byte character at position 0, this hints at some data corruption going on
2020-07-21 07:10:53,947 - Recv: echo: Last Updated: May 18 2020 17:11:15 | Author: (none, default config)
2020-07-21 07:10:53,950 - Recv: Compiled: May 18 2020
2020-07-21 07:10:53,952 - Recv: echo: Free Memory: 1675  PlannerBufferBytes: 1792
2020-07-21 07:10:53,956 - Recv: echo:Stored settings retrieved
2020-07-21 07:10:53,958 - Recv: adc_init
2020-07-21 07:10:54,273 - Recv: CrashDetect ENABLED!
2020-07-21 07:10:55,372 - Recv: FSensor ENABLED (sensor board revision: 0.3 or older)
2020-07-21 07:10:55,559 - Recv: Sending 0xFF
2020-07-21 07:10:55,570 - Recv: echo:SD card ok
2020-07-21 07:10:56,021 - Recv: echo:busy: processing
2020-07-21 07:10:56,365 - Send: M105
2020-07-21 07:10:57,328 - Recv: ok T:24.0 /0.0 B:24.9 /0.0 T0:24.0 /0.0 @:0 B@:0 P:98.7 A:32.5
2020-07-21 07:10:58,719 - Recv: MMU => 'start'
2020-07-21 07:10:58,731 - Recv: MMU <= 'S1'
2020-07-21 07:11:01,370 - Send: M105
2020-07-21 07:11:04,972 - Communication timeout while idle, trying to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
2020-07-21 07:11:04,984 - Recv: echo: 3.9.0-3421
2020-07-21 07:11:04,995 - WARNThe received line contains at least one null byte character at position 0, this hints at some data corruption going on
2020-07-21 07:11:04,999 - Recv: echo: Last Updated: May 18 2020 17:11:15 | Author: (none, default config)
2020-07-21 07:11:05,002 - Recv: Compiled: May 18 2020
2020-07-21 07:11:05,004 - Recv: echo: Free Memory: 1675  PlannerBufferBytes: 1792
2020-07-21 07:11:05,006 - Recv: echo:Stored settings retrieved
2020-07-21 07:11:05,007 - Recv: adc_init
2020-07-21 07:11:05,326 - Recv: CrashDetect ENABLED!
2020-07-21 07:11:06,372 - Send: M105
2020-07-21 07:11:10,906 - Recv: echo: 3.9.0-3421
2020-07-21 07:11:10,925 - WARNThe received line contains at least one null byte character at position 0, this hints at some data corruption going on
2020-07-21 07:11:10,930 - Recv: echo: Last Updated: May 18 2020 17:11:15 | Author: (none, default config)
2020-07-21 07:11:10,933 - Recv: Compiled: May 18 2020
2020-07-21 07:11:10,935 - Recv: echo: Free Memory: 1675  PlannerBufferBytes: 1792
2020-07-21 07:11:10,938 - Recv: echo:Stored settings retrieved
2020-07-21 07:11:10,940 - Recv: adc_init
2020-07-21 07:11:11,262 - Recv: CrashDetect ENABLED!
2020-07-21 07:11:12,366 - Recv: FSensor ENABLED (sensor board revision: 0.3 or older)
2020-07-21 07:11:12,548 - Recv: Sending 0xFF
2020-07-21 07:11:12,559 - Recv: echo:SD card ok
2020-07-21 07:11:13,010 - Recv: echo:busy: processing
2020-07-21 07:11:15,707 - Recv: MMU => 'start'
2020-07-21 07:11:15,719 - Recv: MMU <= 'S1'
2020-07-21 07:11:21,734 - Communication timeout while idle, trying to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
2020-07-21 07:11:21,741 - Send: M105
2020-07-21 07:11:21,753 - Recv: ok T:24.0 /0.0 B:24.9 /0.0 T0:24.0 /0.0 @:0 B@:0 P:25.5 A:32.2
2020-07-21 07:11:24,386 - Recv: MMU => '106ok'
2020-07-21 07:11:24,393 - Recv: MMU <= 'S2'
2020-07-21 07:11:24,401 - Recv: MMU => '372ok'
2020-07-21 07:11:24,406 - Recv: MMU version valid
2020-07-21 07:11:24,408 - Recv: MMU - ENABLED
2020-07-21 07:11:26,382 - Send: M105
2020-07-21 07:11:26,394 - Recv: ok T:23.9 /0.0 B:24.9 /0.0 T0:23.9 /0.0 @:0 B@:0 P:25.4 A:32.3
2020-07-21 07:11:31,387 - Send: M105
2020-07-21 07:11:31,399 - Recv: ok T:23.9 /0.0 B:25.0 /0.0 T0:23.9 /0.0 @:0 B@:0 P:25.4 A:32.2
2020-07-21 07:11:36,389 - Send: M105
2020-07-21 07:11:36,901 - Recv: echo: 3.9.0-3421
2020-07-21 07:11:36,919 - WARNThe received line contains at least one null byte character at position 0, this hints at some data corruption going on
2020-07-21 07:11:36,926 - Recv: echo: Last Updated: May 18 2020 17:11:15 | Author: (none, default config)
2020-07-21 07:11:36,928 - Recv: Compiled: May 18 2020
2020-07-21 07:11:36,930 - Recv: echo: Free Memory: 1675  PlannerBufferBytes: 1792
2020-07-21 07:11:36,933 - Recv: echo:Stored settings retrieved
2020-07-21 07:11:36,935 - Recv: adc_init
2020-07-21 07:11:37,257 - Recv: CrashDetect ENABLED!
2020-07-21 07:11:38,355 - Recv: FSensor ENABLED (sensor board revision: 0.3 or older)
2020-07-21 07:11:38,543 - Recv: Sending 0xFF
2020-07-21 07:11:38,554 - Recv: echo:SD card ok
2020-07-21 07:11:39,004 - Recv: echo:busy: processing
2020-07-21 07:11:41,702 - Recv: MMU => 'start'
2020-07-21 07:11:41,705 - Recv: MMU <= 'S1'
2020-07-21 07:11:52,049 - Communication timeout while idle, trying to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
2020-07-21 07:11:52,057 - Recv: echo: 3.9.0-3421
2020-07-21 07:11:52,069 - Send: M105
2020-07-21 07:11:52,076 - WARNThe received line contains at least one null byte character at position 0, this hints at some data corruption going on
2020-07-21 07:11:52,082 - Recv: echo: Last Updated: May 18 2020 17:11:15 | Author: (none, default config)
2020-07-21 07:11:52,084 - Recv: Compiled: May 18 2020
2020-07-21 07:11:52,087 - Recv: echo: Free Memory: 1675  PlannerBufferBytes: 1792
2020-07-21 07:11:52,088 - Recv: echo:Stored settings retrieved
2020-07-21 07:11:52,091 - Recv: adc_init
2020-07-21 07:11:58,365 - Communication timeout while idle, trying to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
2020-07-21 07:11:58,378 - Send: M105
2020-07-21 07:11:58,904 - Recv: echo: 3.9.0-3421
2020-07-21 07:11:58,914 - WARNThe received line contains at least one null byte character at position 0, this hints at some data corruption going on
2020-07-21 07:11:58,918 - Recv: echo: Last Updated: May 18 2020 17:11:15 | Author: (none, default config)
2020-07-21 07:11:58,921 - Recv: Compiled: May 18 2020
2020-07-21 07:11:58,923 - Recv: echo: Free Memory: 1675  PlannerBufferBytes: 1792
2020-07-21 07:11:58,926 - Recv: echo:Stored settings retrieved
2020-07-21 07:11:58,929 - Recv: adc_init
2020-07-21 07:11:59,260 - Recv: CrashDetect ENABLED!
2020-07-21 07:12:00,359 - Recv: FSensor ENABLED (sensor board revision: 0.3 or older)
2020-07-21 07:12:00,547 - Recv: Sending 0xFF
2020-07-21 07:12:00,558 - Recv: echo:SD card ok
2020-07-21 07:12:01,008 - Recv: echo:busy: processing
2020-07-21 07:12:03,706 - Recv: MMU => 'start'
2020-07-21 07:12:03,708 - Recv: MMU <= 'S1'
2020-07-21 07:12:09,725 - Communication timeout while idle, trying to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
2020-07-21 07:12:09,734 - Send: M105
2020-07-21 07:12:09,747 - Recv: ok T:24.1 /0.0 B:24.9 /0.0 T0:24.1 /0.0 @:0 B@:0 P:25.5 A:32.6
2020-07-21 07:12:11,410 - Send: M105
2020-07-21 07:12:11,423 - Recv: ok T:24.1 /0.0 B:24.8 /0.0 T0:24.1 /0.0 @:0 B@:0 P:25.5 A:32.3
2020-07-21 07:12:12,385 - Recv: MMU => '106ok'
2020-07-21 07:12:12,388 - Recv: MMU <= 'S2'
2020-07-21 07:12:12,390 - Recv: MMU => '372ok'
2020-07-21 07:12:12,394 - Recv: MMU version valid
2020-07-21 07:12:12,397 - Recv: MMU - ENABLED
2020-07-21 07:12:16,414 - Send: M105
2020-07-21 07:12:16,423 - Recv: ok T:23.9 /0.0 B:25.1 /0.0 T0:23.9 /0.0 @:0 B@:0 P:25.5 A:32.5
2020-07-21 07:12:21,417 - Send: M105
2020-07-21 07:12:21,432 - Recv: ok T:23.8 /0.0 B:25.0 /0.0 T0:23.8 /0.0 @:0 B@:0 P:25.5 A:32.4
2020-07-21 07:12:26,419 - Send: M105
2020-07-21 07:12:26,432 - Recv: ok T:24.1 /0.0 B:24.8 /0.0 T0:24.1 /0.0 @:0 B@:0 P:25.4 A:32.2
2020-07-21 07:12:31,422 - Send: M105
2020-07-21 07:12:31,436 - Recv: ok T:24.2 /0.0 B:25.0 /0.0 T0:24.2 /0.0 @:0 B@:0 P:25.5 A:32.1
2020-07-21 07:12:36,424 - Send: M105
2020-07-21 07:12:36,438 - Recv: ok T:24.0 /0.0 B:25.0 /0.0 T0:24.0 /0.0 @:0 B@:0 P:25.5 A:32.3
2020-07-21 07:12:41,427 - Send: M105
2020-07-21 07:12:41,439 - Recv: ok T:24.0 /0.0 B:25.1 /0.0 T0:24.0 /0.0 @:0 B@:0 P:25.5 A:32.3
2020-07-21 07:12:46,433 - Send: M105
2020-07-21 07:12:46,444 - Recv: ok T:24.1 /0.0 B:24.9 /0.0 T0:24.1 /0.0 @:0 B@:0 P:25.5 A:32.4
2020-07-21 07:12:51,436 - Send: M105
2020-07-21 07:12:51,451 - Recv: ok T:24.0 /0.0 B:25.1 /0.0 T0:24.0 /0.0 @:0 B@:0 P:25.5 A:32.1
2020-07-21 07:12:56,448 - Send: M105
2020-07-21 07:12:56,462 - Recv: ok T:24.0 /0.0 B:24.8 /0.0 T0:24.0 /0.0 @:0 B@:0 P:25.5 A:32.4
2020-07-21 07:13:01,453 - Send: M105
2020-07-21 07:13:01,467 - Recv: ok T:23.8 /0.0 B:24.9 /0.0 T0:23.8 /0.0 @:0 B@:0 P:25.5 A:32.7
2020-07-21 07:13:06,456 - Send: M105
2020-07-21 07:13:06,469 - Recv: ok T:24.0 /0.0 B:25.0 /0.0 T0:24.0 /0.0 @:0 B@:0 P:25.4 A:32.5
2020-07-21 07:13:11,458 - Send: M105
2020-07-21 07:13:11,465 - Recv: ok T:24.0 /0.0 B:24.7 /0.0 T0:24.0 /0.0 @:0 B@:0 P:25.5 A:32.4
2020-07-21 07:13:16,462 - Send: M105
2020-07-21 07:13:16,478 - Recv: ok T:24.1 /0.0 B:25.1 /0.0 T0:24.1 /0.0 @:0 B@:0 P:25.5 A:32.5
2020-07-21 07:13:21,464 - Send: M105
2020-07-21 07:13:21,477 - Recv: ok T:24.1 /0.0 B:25.0 /0.0 T0:24.1 /0.0 @:0 B@:0 P:25.6 A:32.5