Jan 16 10:44:26 octopi kernel: [ 0.000000] Booting Linux on physical CPU 0x0 Jan 16 10:44:26 octopi kernel: [ 0.000000] Linux version 5.4.51-v7l+ (dom@buildbot) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1327 SMP Thu Jul 23 11:04:39 BST 2020 Jan 16 10:44:26 octopi kernel: [ 0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d Jan 16 10:44:26 octopi kernel: [ 0.000000] CPU: div instructions available: patching division code Jan 16 10:44:26 octopi kernel: [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Jan 16 10:44:26 octopi kernel: [ 0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.1 Jan 16 10:44:26 octopi kernel: [ 0.000000] Memory policy: Data cache writealloc Jan 16 10:44:26 octopi kernel: [ 0.000000] Reserved memory: created CMA memory pool at 0x000000001ec00000, size 256 MiB Jan 16 10:44:26 octopi kernel: [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool Jan 16 10:44:26 octopi kernel: [ 0.000000] On node 0 totalpages: 491520 Jan 16 10:44:26 octopi kernel: [ 0.000000] DMA zone: 2304 pages used for memmap Jan 16 10:44:26 octopi kernel: [ 0.000000] DMA zone: 0 pages reserved Jan 16 10:44:26 octopi kernel: [ 0.000000] DMA zone: 196608 pages, LIFO batch:63 Jan 16 10:44:26 octopi kernel: [ 0.000000] HighMem zone: 294912 pages, LIFO batch:63 Jan 16 10:44:26 octopi kernel: [ 0.000000] percpu: Embedded 20 pages/cpu s49856 r8192 d23872 u81920 Jan 16 10:44:26 octopi kernel: [ 0.000000] pcpu-alloc: s49856 r8192 d23872 u81920 alloc=20*4096 Jan 16 10:44:26 octopi kernel: [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 Jan 16 10:44:26 octopi kernel: [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 489216 Jan 16 10:44:26 octopi kernel: [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 smsc95xx.macaddr=DC:A6:32:14:71:B4 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=6c586e13-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Jan 16 10:44:26 octopi kernel: [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Jan 16 10:44:26 octopi kernel: [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Jan 16 10:44:26 octopi kernel: [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off Jan 16 10:44:26 octopi kernel: [ 0.000000] software IO TLB: mapped [mem 0x19400000-0x1d400000] (64MB) Jan 16 10:44:26 octopi kernel: [ 0.000000] Memory: 1595188K/1966080K available (10240K kernel code, 725K rwdata, 2740K rodata, 2048K init, 853K bss, 108748K reserved, 262144K cma-reserved, 1179648K highmem) Jan 16 10:44:26 octopi kernel: [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Jan 16 10:44:26 octopi kernel: [ 0.000000] ftrace: allocating 30051 entries in 59 pages Jan 16 10:44:26 octopi kernel: [ 0.000000] rcu: Hierarchical RCU implementation. Jan 16 10:44:26 octopi kernel: [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. Jan 16 10:44:26 octopi kernel: [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Jan 16 10:44:26 octopi kernel: [ 0.000000] GIC: Using split EOI/Deactivate mode Jan 16 10:44:26 octopi kernel: [ 0.000000] random: get_random_bytes called from start_kernel+0x340/0x518 with crng_init=0 Jan 16 10:44:26 octopi kernel: [ 0.000007] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns Jan 16 10:44:26 octopi kernel: [ 0.000030] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns Jan 16 10:44:26 octopi kernel: [ 0.000111] bcm2835: system timer (irq = 17) Jan 16 10:44:26 octopi kernel: [ 0.000786] arch_timer: cp15 timer(s) running at 54.00MHz (phys). Jan 16 10:44:26 octopi kernel: [ 0.000807] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns Jan 16 10:44:26 octopi kernel: [ 0.000828] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns Jan 16 10:44:26 octopi kernel: [ 0.000844] Switching to timer-based delay loop, resolution 18ns Jan 16 10:44:26 octopi kernel: [ 0.001096] Console: colour dummy device 80x30 Jan 16 10:44:26 octopi kernel: [ 0.001594] printk: console [tty1] enabled Jan 16 10:44:26 octopi kernel: [ 0.001654] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000) Jan 16 10:44:26 octopi kernel: [ 0.001696] pid_max: default: 32768 minimum: 301 Jan 16 10:44:26 octopi kernel: [ 0.002023] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Jan 16 10:44:26 octopi kernel: [ 0.002064] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Jan 16 10:44:26 octopi kernel: [ 0.003258] Disabling memory control group subsystem Jan 16 10:44:26 octopi kernel: [ 0.003374] CPU: Testing write buffer coherency: ok Jan 16 10:44:26 octopi kernel: [ 0.003868] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Jan 16 10:44:26 octopi kernel: [ 0.004716] Setting up static identity map for 0x200000 - 0x20003c Jan 16 10:44:26 octopi kernel: [ 0.004918] rcu: Hierarchical SRCU implementation. Jan 16 10:44:26 octopi kernel: [ 0.005555] smp: Bringing up secondary CPUs ... Jan 16 10:44:26 octopi kernel: [ 0.006713] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Jan 16 10:44:26 octopi kernel: [ 0.007987] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 Jan 16 10:44:26 octopi kernel: [ 0.009198] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 Jan 16 10:44:26 octopi kernel: [ 0.009343] smp: Brought up 1 node, 4 CPUs Jan 16 10:44:26 octopi kernel: [ 0.009413] SMP: Total of 4 processors activated (432.00 BogoMIPS). Jan 16 10:44:26 octopi kernel: [ 0.009439] CPU: All CPU(s) started in HYP mode. Jan 16 10:44:26 octopi kernel: [ 0.009462] CPU: Virtualization extensions available. Jan 16 10:44:26 octopi kernel: [ 0.010239] devtmpfs: initialized Jan 16 10:44:26 octopi kernel: [ 0.023321] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0 Jan 16 10:44:26 octopi kernel: [ 0.023595] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns Jan 16 10:44:26 octopi kernel: [ 0.023642] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) Jan 16 10:44:26 octopi kernel: [ 0.031393] pinctrl core: initialized pinctrl subsystem Jan 16 10:44:26 octopi kernel: [ 0.032442] NET: Registered protocol family 16 Jan 16 10:44:26 octopi kernel: [ 0.036086] DMA: preallocated 1024 KiB pool for atomic coherent allocations Jan 16 10:44:26 octopi kernel: [ 0.037763] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Jan 16 10:44:26 octopi kernel: [ 0.037797] hw-breakpoint: maximum watchpoint size is 8 bytes. Jan 16 10:44:26 octopi kernel: [ 0.038138] Serial: AMBA PL011 UART driver Jan 16 10:44:26 octopi kernel: [ 0.041807] bcm2835-mbox fe00b880.mailbox: mailbox enabled Jan 16 10:44:26 octopi kernel: [ 0.060852] raspberrypi-firmware soc:firmware: Attached to firmware from 2020-07-17 11:00, variant start_x Jan 16 10:44:26 octopi kernel: [ 0.070868] raspberrypi-firmware soc:firmware: Firmware hash is 21a15cb094f41c7506ad65d2cb9b29c550693057 Jan 16 10:44:26 octopi kernel: [ 0.125140] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1 Jan 16 10:44:26 octopi kernel: [ 0.129647] vgaarb: loaded Jan 16 10:44:26 octopi kernel: [ 0.130115] SCSI subsystem initialized Jan 16 10:44:26 octopi kernel: [ 0.130365] usbcore: registered new interface driver usbfs Jan 16 10:44:26 octopi kernel: [ 0.130437] usbcore: registered new interface driver hub Jan 16 10:44:26 octopi kernel: [ 0.130567] usbcore: registered new device driver usb Jan 16 10:44:26 octopi kernel: [ 0.132139] clocksource: Switched to clocksource arch_sys_counter Jan 16 10:44:26 octopi kernel: [ 0.882396] VFS: Disk quotas dquot_6.6.0 Jan 16 10:44:26 octopi kernel: [ 0.882516] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Jan 16 10:44:26 octopi kernel: [ 0.882684] FS-Cache: Loaded Jan 16 10:44:26 octopi kernel: [ 0.882883] CacheFiles: Loaded Jan 16 10:44:26 octopi kernel: [ 0.883726] simple-framebuffer 3ea50000.framebuffer: framebuffer at 0x3ea50000, 0x177000 bytes, mapped to 0x(ptrval) Jan 16 10:44:26 octopi kernel: [ 0.883767] simple-framebuffer 3ea50000.framebuffer: format=a8r8g8b8, mode=800x480x32, linelength=3200 Jan 16 10:44:26 octopi kernel: [ 0.886115] Console: switching to colour frame buffer device 100x30 Jan 16 10:44:26 octopi kernel: [ 0.889100] simple-framebuffer 3ea50000.framebuffer: fb0: simplefb registered! Jan 16 10:44:26 octopi kernel: [ 0.900131] thermal_sys: Registered thermal governor 'step_wise' Jan 16 10:44:26 octopi kernel: [ 0.900482] NET: Registered protocol family 2 Jan 16 10:44:26 octopi kernel: [ 0.903420] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) Jan 16 10:44:26 octopi kernel: [ 0.904578] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Jan 16 10:44:26 octopi kernel: [ 0.905775] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) Jan 16 10:44:26 octopi kernel: [ 0.906957] TCP: Hash tables configured (established 8192 bind 8192) Jan 16 10:44:26 octopi kernel: [ 0.908195] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Jan 16 10:44:26 octopi kernel: [ 0.909319] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Jan 16 10:44:26 octopi kernel: [ 0.910650] NET: Registered protocol family 1 Jan 16 10:44:26 octopi kernel: [ 0.912446] RPC: Registered named UNIX socket transport module. Jan 16 10:44:26 octopi kernel: [ 0.913553] RPC: Registered udp transport module. Jan 16 10:44:26 octopi kernel: [ 0.914636] RPC: Registered tcp transport module. Jan 16 10:44:26 octopi kernel: [ 0.915716] RPC: Registered tcp NFSv4.1 backchannel transport module. Jan 16 10:44:26 octopi kernel: [ 0.916827] PCI: CLS 0 bytes, default 64 Jan 16 10:44:26 octopi kernel: [ 0.919719] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Jan 16 10:44:26 octopi kernel: [ 0.923023] Initialise system trusted keyrings Jan 16 10:44:26 octopi kernel: [ 0.924352] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Jan 16 10:44:26 octopi kernel: [ 0.936135] FS-Cache: Netfs 'nfs' registered for caching Jan 16 10:44:26 octopi kernel: [ 0.937998] NFS: Registering the id_resolver key type Jan 16 10:44:26 octopi kernel: [ 0.939157] Key type id_resolver registered Jan 16 10:44:26 octopi kernel: [ 0.940259] Key type id_legacy registered Jan 16 10:44:26 octopi kernel: [ 0.941337] nfs4filelayout_init: NFSv4 File Layout Driver Registering... Jan 16 10:44:26 octopi kernel: [ 0.943524] Key type asymmetric registered Jan 16 10:44:26 octopi kernel: [ 0.944592] Asymmetric key parser 'x509' registered Jan 16 10:44:26 octopi kernel: [ 0.945796] bounce: pool size: 64 pages Jan 16 10:44:26 octopi kernel: [ 0.946845] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) Jan 16 10:44:26 octopi kernel: [ 0.948104] io scheduler mq-deadline registered Jan 16 10:44:26 octopi kernel: [ 0.949138] io scheduler kyber registered Jan 16 10:44:26 octopi kernel: [ 0.953993] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges: Jan 16 10:44:26 octopi kernel: [ 0.955027] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff] Jan 16 10:44:26 octopi kernel: [ 0.957055] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x0603ffffff -> 0x00f8000000 Jan 16 10:44:26 octopi kernel: [ 0.958159] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x007fffffff -> 0x0000000000 Jan 16 10:44:26 octopi kernel: [ 1.014248] brcm-pcie fd500000.pcie: link up, 5 GT/s x1 (SSC) Jan 16 10:44:26 octopi kernel: [ 1.015559] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00 Jan 16 10:44:26 octopi kernel: [ 1.016580] pci_bus 0000:00: root bus resource [bus 00-ff] Jan 16 10:44:26 octopi kernel: [ 1.017625] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff]) Jan 16 10:44:26 octopi kernel: [ 1.019750] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400 Jan 16 10:44:26 octopi kernel: [ 1.021040] pci 0000:00:00.0: PME# supported from D0 D3hot Jan 16 10:44:26 octopi kernel: [ 1.025486] PCI: bus0: Fast back to back transfers disabled Jan 16 10:44:26 octopi kernel: [ 1.026525] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring Jan 16 10:44:26 octopi kernel: [ 1.027821] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330 Jan 16 10:44:26 octopi kernel: [ 1.029003] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] Jan 16 10:44:26 octopi kernel: [ 1.030426] pci 0000:01:00.0: PME# supported from D0 D3cold Jan 16 10:44:26 octopi kernel: [ 1.034874] PCI: bus1: Fast back to back transfers disabled Jan 16 10:44:26 octopi kernel: [ 1.035936] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 Jan 16 10:44:26 octopi kernel: [ 1.037030] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff] Jan 16 10:44:26 octopi kernel: [ 1.038119] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit] Jan 16 10:44:26 octopi kernel: [ 1.039249] pci 0000:00:00.0: PCI bridge to [bus 01] Jan 16 10:44:26 octopi kernel: [ 1.040295] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff] Jan 16 10:44:26 octopi kernel: [ 1.041628] pcieport 0000:00:00.0: enabling device (0140 -> 0142) Jan 16 10:44:26 octopi kernel: [ 1.042911] pcieport 0000:00:00.0: PME: Signaling with IRQ 55 Jan 16 10:44:26 octopi kernel: [ 1.044299] pcieport 0000:00:00.0: AER: enabled with IRQ 55 Jan 16 10:44:26 octopi kernel: [ 1.045618] pci 0000:01:00.0: enabling device (0140 -> 0142) Jan 16 10:44:26 octopi kernel: [ 1.053607] iproc-rng200 fe104000.rng: hwrng registered Jan 16 10:44:26 octopi kernel: [ 1.054883] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) Jan 16 10:44:26 octopi kernel: [ 1.056534] vc-sm: Videocore shared memory driver Jan 16 10:44:26 octopi kernel: [ 1.058064] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000 Jan 16 10:44:26 octopi kernel: [ 1.070778] brd: module loaded Jan 16 10:44:26 octopi kernel: [ 1.083774] loop: module loaded Jan 16 10:44:26 octopi kernel: [ 1.086165] Loading iSCSI transport class v2.0-870. Jan 16 10:44:26 octopi kernel: [ 1.089071] libphy: Fixed MDIO Bus: probed Jan 16 10:44:26 octopi kernel: [ 1.090616] bcmgenet fd580000.ethernet: failed to get enet clock Jan 16 10:44:26 octopi kernel: [ 1.091620] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000 Jan 16 10:44:26 octopi kernel: [ 1.092698] bcmgenet fd580000.ethernet: failed to get enet-wol clock Jan 16 10:44:26 octopi kernel: [ 1.093663] bcmgenet fd580000.ethernet: failed to get enet-eee clock Jan 16 10:44:26 octopi kernel: [ 1.094591] bcmgenet: Skipping UMAC reset Jan 16 10:44:26 octopi kernel: [ 1.112276] libphy: bcmgenet MII bus: probed Jan 16 10:44:26 octopi kernel: [ 1.202238] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus Jan 16 10:44:26 octopi kernel: [ 1.204206] usbcore: registered new interface driver r8152 Jan 16 10:44:26 octopi kernel: [ 1.205182] usbcore: registered new interface driver lan78xx Jan 16 10:44:26 octopi kernel: [ 1.206123] usbcore: registered new interface driver smsc95xx Jan 16 10:44:26 octopi kernel: [ 1.207425] xhci_hcd 0000:01:00.0: xHCI Host Controller Jan 16 10:44:26 octopi kernel: [ 1.208318] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 Jan 16 10:44:26 octopi kernel: [ 1.211412] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000001000000890 Jan 16 10:44:26 octopi kernel: [ 1.214446] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 Jan 16 10:44:26 octopi kernel: [ 1.215434] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jan 16 10:44:26 octopi kernel: [ 1.216406] usb usb1: Product: xHCI Host Controller Jan 16 10:44:26 octopi kernel: [ 1.217368] usb usb1: Manufacturer: Linux 5.4.51-v7l+ xhci-hcd Jan 16 10:44:26 octopi kernel: [ 1.218311] usb usb1: SerialNumber: 0000:01:00.0 Jan 16 10:44:26 octopi kernel: [ 1.219770] hub 1-0:1.0: USB hub found Jan 16 10:44:26 octopi kernel: [ 1.220736] hub 1-0:1.0: 1 port detected Jan 16 10:44:26 octopi kernel: [ 1.222106] xhci_hcd 0000:01:00.0: xHCI Host Controller Jan 16 10:44:26 octopi kernel: [ 1.223042] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 Jan 16 10:44:26 octopi kernel: [ 1.223951] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed Jan 16 10:44:26 octopi kernel: [ 1.225266] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04 Jan 16 10:44:26 octopi kernel: [ 1.226189] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jan 16 10:44:26 octopi kernel: [ 1.227118] usb usb2: Product: xHCI Host Controller Jan 16 10:44:26 octopi kernel: [ 1.228044] usb usb2: Manufacturer: Linux 5.4.51-v7l+ xhci-hcd Jan 16 10:44:26 octopi kernel: [ 1.228998] usb usb2: SerialNumber: 0000:01:00.0 Jan 16 10:44:26 octopi kernel: [ 1.230459] hub 2-0:1.0: USB hub found Jan 16 10:44:26 octopi kernel: [ 1.231455] hub 2-0:1.0: 4 ports detected Jan 16 10:44:26 octopi kernel: [ 1.233823] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) Jan 16 10:44:26 octopi kernel: [ 1.235022] dwc_otg: FIQ enabled Jan 16 10:44:26 octopi kernel: [ 1.235034] dwc_otg: NAK holdoff enabled Jan 16 10:44:26 octopi kernel: [ 1.235045] dwc_otg: FIQ split-transaction FSM enabled Jan 16 10:44:26 octopi kernel: [ 1.235060] Module dwc_common_port init Jan 16 10:44:26 octopi kernel: [ 1.235530] usbcore: registered new interface driver uas Jan 16 10:44:26 octopi kernel: [ 1.236575] usbcore: registered new interface driver usb-storage Jan 16 10:44:26 octopi kernel: [ 1.237705] mousedev: PS/2 mouse device common for all mice Jan 16 10:44:26 octopi kernel: [ 1.240713] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer Jan 16 10:44:26 octopi kernel: [ 1.244132] sdhci: Secure Digital Host Controller Interface driver Jan 16 10:44:26 octopi kernel: [ 1.245102] sdhci: Copyright(c) Pierre Ossman Jan 16 10:44:26 octopi kernel: [ 1.246585] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe Jan 16 10:44:26 octopi kernel: [ 1.248056] sdhci-pltfm: SDHCI platform and OF driver helper Jan 16 10:44:26 octopi kernel: [ 1.252701] ledtrig-cpu: registered to indicate activity on CPUs Jan 16 10:44:26 octopi kernel: [ 1.253924] hidraw: raw HID events driver (C) Jiri Kosina Jan 16 10:44:26 octopi kernel: [ 1.255009] usbcore: registered new interface driver usbhid Jan 16 10:44:26 octopi kernel: [ 1.255934] usbhid: USB HID core driver Jan 16 10:44:26 octopi kernel: [ 1.257853] vchiq: vchiq_init_state: slot_zero = (ptrval) Jan 16 10:44:26 octopi kernel: [ 1.260659] [vc_sm_connected_init]: start Jan 16 10:44:26 octopi kernel: [ 1.269844] [vc_sm_connected_init]: end - returning 0 Jan 16 10:44:26 octopi kernel: [ 1.272895] Initializing XFRM netlink socket Jan 16 10:44:26 octopi kernel: [ 1.273860] NET: Registered protocol family 17 Jan 16 10:44:26 octopi kernel: [ 1.274892] Key type dns_resolver registered Jan 16 10:44:26 octopi kernel: [ 1.276129] Registering SWP/SWPB emulation handler Jan 16 10:44:26 octopi kernel: [ 1.277297] registered taskstats version 1 Jan 16 10:44:26 octopi kernel: [ 1.278173] Loading compiled-in X.509 certificates Jan 16 10:44:26 octopi kernel: [ 1.279511] Key type ._fscrypt registered Jan 16 10:44:26 octopi kernel: [ 1.280383] Key type .fscrypt registered Jan 16 10:44:26 octopi kernel: [ 1.291452] uart-pl011 fe201000.serial: cts_event_workaround enabled Jan 16 10:44:26 octopi kernel: [ 1.292516] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 29, base_baud = 0) is a PL011 rev2 Jan 16 10:44:26 octopi kernel: [ 1.299356] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver Jan 16 10:44:26 octopi kernel: [ 1.301234] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0 Jan 16 10:44:26 octopi kernel: [ 1.302254] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated Jan 16 10:44:26 octopi kernel: [ 1.353820] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) Jan 16 10:44:26 octopi kernel: [ 1.356434] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) Jan 16 10:44:26 octopi kernel: [ 1.359008] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) Jan 16 10:44:26 octopi kernel: [ 1.362857] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) Jan 16 10:44:26 octopi kernel: [ 1.365342] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) Jan 16 10:44:26 octopi kernel: [ 1.368178] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA Jan 16 10:44:26 octopi kernel: [ 1.371803] of_cfs_init Jan 16 10:44:26 octopi kernel: [ 1.372791] of_cfs_init: OK Jan 16 10:44:26 octopi kernel: [ 1.374729] Waiting for root device PARTUUID=6c586e13-02... Jan 16 10:44:26 octopi kernel: [ 1.413682] random: fast init done Jan 16 10:44:26 octopi kernel: [ 1.472680] mmc0: new ultra high speed DDR50 SDHC card at address aaaa Jan 16 10:44:26 octopi kernel: [ 1.475558] mmcblk0: mmc0:aaaa SS16G 14.8 GiB Jan 16 10:44:26 octopi kernel: [ 1.480571] mmcblk0: p1 p2 Jan 16 10:44:26 octopi kernel: [ 1.483833] mmc1: new high speed SDIO card at address 0001 Jan 16 10:44:26 octopi kernel: [ 1.505236] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) Jan 16 10:44:26 octopi kernel: [ 1.506196] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. Jan 16 10:44:26 octopi kernel: [ 1.512371] devtmpfs: mounted Jan 16 10:44:26 octopi kernel: [ 1.521183] Freeing unused kernel memory: 2048K Jan 16 10:44:26 octopi kernel: [ 1.532443] Run /sbin/init as init process Jan 16 10:44:26 octopi kernel: [ 1.582203] usb 1-1: new high-speed USB device number 2 using xhci_hcd Jan 16 10:44:26 octopi kernel: [ 1.764803] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21 Jan 16 10:44:26 octopi kernel: [ 1.765763] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 Jan 16 10:44:26 octopi kernel: [ 1.766722] usb 1-1: Product: USB2.0 Hub Jan 16 10:44:26 octopi kernel: [ 1.769540] hub 1-1:1.0: USB hub found Jan 16 10:44:26 octopi kernel: [ 1.770719] hub 1-1:1.0: 4 ports detected Jan 16 10:44:26 octopi kernel: [ 2.092257] usb 1-1.3: new full-speed USB device number 3 using xhci_hcd Jan 16 10:44:26 octopi kernel: [ 2.098495] NET: Registered protocol family 10 Jan 16 10:44:26 octopi kernel: [ 2.100811] Segment Routing with IPv6 Jan 16 10:44:26 octopi kernel: [ 2.233275] usb 1-1.3: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.01 Jan 16 10:44:26 octopi kernel: [ 2.234414] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Jan 16 10:44:26 octopi kernel: [ 2.235498] usb 1-1.3: Product: USB Receiver Jan 16 10:44:26 octopi kernel: [ 2.236548] usb 1-1.3: Manufacturer: Logitech Jan 16 10:44:26 octopi kernel: [ 2.250276] input: Logitech USB Receiver as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:046D:C52B.0001/input/input0 Jan 16 10:44:26 octopi kernel: [ 2.323164] hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:01:00.0-1.3/input0 Jan 16 10:44:26 octopi kernel: [ 2.336582] input: Logitech USB Receiver Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:046D:C52B.0002/input/input1 Jan 16 10:44:26 octopi kernel: [ 2.339888] input: Logitech USB Receiver Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:046D:C52B.0002/input/input2 Jan 16 10:44:26 octopi kernel: [ 2.412439] input: Logitech USB Receiver System Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:046D:C52B.0002/input/input3 Jan 16 10:44:26 octopi kernel: [ 2.415560] hid-generic 0003:046D:C52B.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:01:00.0-1.3/input1 Jan 16 10:44:26 octopi kernel: [ 2.426122] hid-generic 0003:046D:C52B.0003: hiddev97,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:01:00.0-1.3/input2 Jan 16 10:44:26 octopi kernel: [ 3.061667] random: systemd: uninitialized urandom read (16 bytes read) Jan 16 10:44:26 octopi kernel: [ 3.080655] random: systemd: uninitialized urandom read (16 bytes read) Jan 16 10:44:26 octopi kernel: [ 3.091131] random: systemd: uninitialized urandom read (16 bytes read) Jan 16 10:44:26 octopi kernel: [ 3.822690] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) Jan 16 10:44:26 octopi kernel: [ 4.533267] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x00010000 Jan 16 10:44:26 octopi kernel: [ 4.533745] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00001000 Jan 16 10:44:26 octopi kernel: [ 4.534725] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x00010000 Jan 16 10:44:26 octopi kernel: [ 4.535165] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x00010000 Jan 16 10:44:26 octopi kernel: [ 4.574964] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. Jan 16 10:44:26 octopi kernel: [ 4.580043] mc: Linux media interface: v0.10 Jan 16 10:44:26 octopi kernel: [ 4.581406] bcm2835_vc_sm_cma_probe: Videocore shared memory driver Jan 16 10:44:26 octopi kernel: [ 4.581427] [vc_sm_connected_init]: start Jan 16 10:44:26 octopi kernel: [ 4.601047] [vc_sm_connected_init]: installed successfully Jan 16 10:44:26 octopi kernel: [ 4.611622] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. Jan 16 10:44:26 octopi kernel: [ 4.627721] bcm2835_audio bcm2835_audio: card created with 8 channels Jan 16 10:44:26 octopi kernel: [ 4.672433] videodev: Linux video capture interface: v2.00 Jan 16 10:44:26 octopi kernel: [ 4.732753] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. Jan 16 10:44:26 octopi kernel: [ 4.733768] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. Jan 16 10:44:26 octopi kernel: [ 4.734725] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. Jan 16 10:44:26 octopi kernel: [ 4.745878] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. Jan 16 10:44:26 octopi kernel: [ 4.747029] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. Jan 16 10:44:26 octopi kernel: [ 4.749572] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned. Jan 16 10:44:26 octopi kernel: [ 4.763582] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13 Jan 16 10:44:26 octopi kernel: [ 4.899474] input: raspberrypi-ts as /devices/platform/soc/soc:firmware/soc:firmware:touchscreen/input/input5 Jan 16 10:44:26 octopi kernel: [ 4.924045] cfg80211: Loading compiled-in X.509 certificates for regulatory database Jan 16 10:44:26 octopi kernel: [ 5.039175] vc4-drm gpu: bound fe600000.firmwarekms (ops vc4_fkms_ops [vc4]) Jan 16 10:44:26 octopi kernel: [ 5.039200] checking generic (3ea50000 177000) vs hw (0 ffffffffffffffff) Jan 16 10:44:26 octopi kernel: [ 5.039214] fb0: switching to vc4drmfb from simple Jan 16 10:44:26 octopi kernel: [ 5.041676] Console: switching to colour dummy device 80x30 Jan 16 10:44:26 octopi kernel: [ 5.041976] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). Jan 16 10:44:26 octopi kernel: [ 5.041992] [drm] No driver support for vblank timestamp query. Jan 16 10:44:26 octopi kernel: [ 5.042004] [drm] Setting vblank_disable_immediate to false because get_vblank_timestamp == NULL Jan 16 10:44:26 octopi kernel: [ 5.048071] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 0 Jan 16 10:44:26 octopi kernel: [ 5.052912] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' Jan 16 10:44:26 octopi kernel: [ 5.106161] brcmfmac: F1 signature read @0x18000000=0x15264345 Jan 16 10:44:26 octopi kernel: [ 5.108765] Console: switching to colour frame buffer device 100x30 Jan 16 10:44:26 octopi kernel: [ 5.128490] vc4-drm gpu: fb0: vc4drmfb frame buffer device Jan 16 10:44:26 octopi kernel: [ 5.132416] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 Jan 16 10:44:26 octopi kernel: [ 5.133249] usbcore: registered new interface driver brcmfmac Jan 16 10:44:26 octopi kernel: [ 5.154645] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 1 Jan 16 10:44:26 octopi kernel: [ 5.156034] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.txt failed with error -2 Jan 16 10:44:26 octopi kernel: [ 5.377610] logitech-djreceiver 0003:046D:C52B.0003: hiddev96,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:01:00.0-1.3/input2 Jan 16 10:44:26 octopi kernel: [ 5.380927] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 Jan 16 10:44:26 octopi kernel: [ 5.388698] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14 Jan 16 10:44:26 octopi kernel: [ 5.389207] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15 Jan 16 10:44:26 octopi kernel: [ 5.389806] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 Jan 16 10:44:26 octopi kernel: [ 5.389847] bcm2835-codec bcm2835-codec: Loaded V4L2 decode Jan 16 10:44:26 octopi kernel: [ 5.390292] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16 Jan 16 10:44:26 octopi kernel: [ 5.390314] bcm2835-isp bcm2835-isp: Register output node 0 with media controller Jan 16 10:44:26 octopi kernel: [ 5.390334] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller Jan 16 10:44:26 octopi kernel: [ 5.390353] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller Jan 16 10:44:26 octopi kernel: [ 5.390372] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller Jan 16 10:44:26 octopi kernel: [ 5.390623] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp Jan 16 10:44:26 octopi kernel: [ 5.398764] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 Jan 16 10:44:26 octopi kernel: [ 5.398805] bcm2835-codec bcm2835-codec: Loaded V4L2 encode Jan 16 10:44:26 octopi kernel: [ 5.403288] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Mar 2 2020 23:30:41 version 7.45.202 (r724630 CY) FWID 01-72f6ece2 Jan 16 10:44:26 octopi kernel: [ 5.407320] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 Jan 16 10:44:26 octopi kernel: [ 5.407476] bcm2835-codec bcm2835-codec: Loaded V4L2 isp Jan 16 10:44:26 octopi kernel: [ 5.417934] bcm2835-v4l2: scene mode selected 0, was 0 Jan 16 10:44:26 octopi kernel: [ 5.418283] bcm2835-v4l2: V4L2 device registered as video0 - stills mode > 1280x720 Jan 16 10:44:26 octopi kernel: [ 5.428845] bcm2835-v4l2: Broadcom 2835 MMAL video capture ver 0.0.2 loaded. Jan 16 10:44:26 octopi kernel: [ 5.527957] input: Logitech Unifying Device. Wireless PID:405b Keyboard as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0003/0003:046D:405B.0004/input/input6 Jan 16 10:44:26 octopi kernel: [ 5.528927] input: Logitech Unifying Device. Wireless PID:405b Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0003/0003:046D:405B.0004/input/input7 Jan 16 10:44:26 octopi kernel: [ 5.529214] input: Logitech Unifying Device. Wireless PID:405b System Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0003/0003:046D:405B.0004/input/input8 Jan 16 10:44:26 octopi kernel: [ 5.529500] hid-generic 0003:046D:405B.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:405b] on usb-0000:01:00.0-1.3/input2:1 Jan 16 10:44:26 octopi kernel: [ 5.532928] input: Logitech Unifying Device. Wireless PID:4069 Keyboard as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0003/0003:046D:4069.0005/input/input12 Jan 16 10:44:26 octopi kernel: [ 5.533908] input: Logitech Unifying Device. Wireless PID:4069 Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0003/0003:046D:4069.0005/input/input13 Jan 16 10:44:26 octopi kernel: [ 5.542609] input: Logitech Unifying Device. Wireless PID:4069 Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0003/0003:046D:4069.0005/input/input14 Jan 16 10:44:26 octopi kernel: [ 5.542792] input: Logitech Unifying Device. Wireless PID:4069 System Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0003/0003:046D:4069.0005/input/input15 Jan 16 10:44:26 octopi kernel: [ 5.543293] hid-generic 0003:046D:4069.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4069] on usb-0000:01:00.0-1.3/input2:2 Jan 16 10:44:26 octopi kernel: [ 6.960120] 8021q: 802.1Q VLAN Support v1.8 Jan 16 10:44:26 octopi kernel: [ 7.201501] uart-pl011 fe201000.serial: no DMA platform data Jan 16 10:44:26 octopi kernel: [ 7.274315] random: crng init done Jan 16 10:44:26 octopi kernel: [ 7.274334] random: 7 urandom warning(s) missed due to ratelimiting Jan 16 10:44:27 octopi kernel: [ 7.502263] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS Jan 16 10:44:27 octopi kernel: [ 7.525410] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled Jan 16 10:44:27 octopi kernel: [ 7.962418] bcmgenet: Skipping UMAC reset Jan 16 10:44:27 octopi kernel: [ 7.964784] bcmgenet fd580000.ethernet: configuring instance for external RGMII Jan 16 10:44:27 octopi kernel: [ 7.968132] bcmgenet fd580000.ethernet eth0: Link is Down Jan 16 10:44:29 octopi kernel: [ 9.373962] input: Logitech K780 as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0003/0003:046D:405B.0004/input/input19 Jan 16 10:44:29 octopi kernel: [ 9.374526] logitech-hidpp-device 0003:046D:405B.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech K780] on usb-0000:01:00.0-1.3/input2:1 Jan 16 10:44:29 octopi kernel: [ 9.846016] input: Logitech MX Master 2S as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0003/0003:046D:4069.0005/input/input20 Jan 16 10:44:29 octopi kernel: [ 9.846672] logitech-hidpp-device 0003:046D:4069.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech MX Master 2S] on usb-0000:01:00.0-1.3/input2:2 Jan 16 10:44:33 octopi kernel: [ 13.696337] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready Jan 16 10:44:33 octopi kernel: [ 13.963594] Bluetooth: Core ver 2.22 Jan 16 10:44:33 octopi kernel: [ 13.963672] NET: Registered protocol family 31 Jan 16 10:44:33 octopi kernel: [ 13.963686] Bluetooth: HCI device and connection manager initialized Jan 16 10:44:33 octopi kernel: [ 13.963711] Bluetooth: HCI socket layer initialized Jan 16 10:44:33 octopi kernel: [ 13.963730] Bluetooth: L2CAP socket layer initialized Jan 16 10:44:33 octopi kernel: [ 13.963760] Bluetooth: SCO socket layer initialized Jan 16 10:44:33 octopi kernel: [ 13.975247] Bluetooth: HCI UART driver ver 2.3 Jan 16 10:44:33 octopi kernel: [ 13.975265] Bluetooth: HCI UART protocol H4 registered Jan 16 10:44:33 octopi kernel: [ 13.975341] Bluetooth: HCI UART protocol Three-wire (H5) registered Jan 16 10:44:33 octopi kernel: [ 13.975629] Bluetooth: HCI UART protocol Broadcom registered Jan 16 10:44:33 octopi kernel: [ 14.195598] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Jan 16 10:44:33 octopi kernel: [ 14.195608] Bluetooth: BNEP filters: protocol multicast Jan 16 10:44:33 octopi kernel: [ 14.195622] Bluetooth: BNEP socket layer initialized Jan 16 10:44:34 octopi kernel: [ 15.075084] ICMPv6: process `dhcpcd' is using deprecated sysctl (syscall) net.ipv6.neigh.wlan0.retrans_time - use net.ipv6.neigh.wlan0.retrans_time_ms instead Jan 16 13:57:24 octopi kernel: [11570.872051] usb 1-1.4: new full-speed USB device number 4 using xhci_hcd Jan 16 13:57:24 octopi kernel: [11571.009608] usb 1-1.4: New USB device found, idVendor=1d50, idProduct=6029, bcdDevice= 1.00 Jan 16 13:57:24 octopi kernel: [11571.009626] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Jan 16 13:57:24 octopi kernel: [11571.009642] usb 1-1.4: Product: Marlin USB Device Jan 16 13:57:24 octopi kernel: [11571.009658] usb 1-1.4: Manufacturer: marlinfw.org Jan 16 13:57:24 octopi kernel: [11571.009672] usb 1-1.4: SerialNumber: 0AFF600FAF4904675D51EC3DF50020C5 Jan 16 13:57:24 octopi kernel: [11571.016946] usb-storage 1-1.4:1.2: USB Mass Storage device detected Jan 16 13:57:24 octopi kernel: [11571.018658] scsi host0: usb-storage 1-1.4:1.2 Jan 16 13:57:24 octopi kernel: [11571.071297] cdc_acm 1-1.4:1.0: ttyACM0: USB ACM device Jan 16 13:57:24 octopi kernel: [11571.073355] usbcore: registered new interface driver cdc_acm Jan 16 13:57:24 octopi kernel: [11571.073368] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters Jan 16 13:57:25 octopi kernel: [11572.064487] scsi 0:0:0:0: Direct-Access Marlin SDCard 01 1.0 PQ: 0 ANSI: 0 CCS Jan 16 13:57:25 octopi kernel: [11572.091363] sd 0:0:0:0: Attached scsi generic sg0 type 0 Jan 16 13:57:25 octopi kernel: [11572.114030] sd 0:0:0:0: [sda] Attached SCSI removable disk Jan 16 17:35:58 octopi kernel: [24685.130725] usb 1-1.4: USB disconnect, device number 4 Jan 16 17:36:05 octopi kernel: [24692.088116] usb 1-1.4: new full-speed USB device number 5 using xhci_hcd Jan 16 17:36:05 octopi kernel: [24692.225692] usb 1-1.4: New USB device found, idVendor=1d50, idProduct=6029, bcdDevice= 1.00 Jan 16 17:36:05 octopi kernel: [24692.225711] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Jan 16 17:36:05 octopi kernel: [24692.225727] usb 1-1.4: Product: Marlin USB Device Jan 16 17:36:05 octopi kernel: [24692.225742] usb 1-1.4: Manufacturer: marlinfw.org Jan 16 17:36:05 octopi kernel: [24692.225756] usb 1-1.4: SerialNumber: 0AFF600FAF4904675D51EC3DF50020C5 Jan 16 17:36:05 octopi kernel: [24692.240719] cdc_acm 1-1.4:1.0: ttyACM0: USB ACM device Jan 16 17:36:05 octopi kernel: [24692.243892] usb-storage 1-1.4:1.2: USB Mass Storage device detected Jan 16 17:36:05 octopi kernel: [24692.244444] scsi host0: usb-storage 1-1.4:1.2 Jan 16 17:36:06 octopi kernel: [24693.300680] scsi 0:0:0:0: Direct-Access Marlin SDCard 01 1.0 PQ: 0 ANSI: 0 CCS Jan 16 17:36:06 octopi kernel: [24693.301458] sd 0:0:0:0: Attached scsi generic sg0 type 0 Jan 16 17:36:06 octopi kernel: [24693.301837] sd 0:0:0:0: [sda] 31116288 512-byte logical blocks: (15.9 GB/14.8 GiB) Jan 16 17:36:06 octopi kernel: [24693.304792] sd 0:0:0:0: [sda] Write Protect is off Jan 16 17:36:06 octopi kernel: [24693.304812] sd 0:0:0:0: [sda] Mode Sense: 00 00 00 00 Jan 16 17:36:06 octopi kernel: [24693.313165] sd 0:0:0:0: [sda] Asking for cache data failed Jan 16 17:36:06 octopi kernel: [24693.313183] sd 0:0:0:0: [sda] Assuming drive cache: write through Jan 16 17:36:19 octopi kernel: [24705.958768] sd 0:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 Jan 16 17:36:19 octopi kernel: [24705.958810] sd 0:0:0:0: [sda] tag#0 Sense Key : 0x2 [current] Jan 16 17:36:19 octopi kernel: [24705.958834] sd 0:0:0:0: [sda] tag#0 ASC=0x3a ASCQ=0x0 Jan 16 17:36:19 octopi kernel: [24705.958858] sd 0:0:0:0: [sda] tag#0 CDB: opcode=0x28 28 00 00 00 00 00 00 00 08 00 Jan 16 17:36:19 octopi kernel: [24705.958884] blk_update_request: I/O error, dev sda, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jan 16 17:36:19 octopi kernel: [24705.958908] Buffer I/O error on dev sda, logical block 0, async page read Jan 16 17:36:19 octopi kernel: [24705.968823] sd 0:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 Jan 16 17:36:19 octopi kernel: [24705.968858] sd 0:0:0:0: [sda] tag#0 Sense Key : 0x2 [current] Jan 16 17:36:19 octopi kernel: [24705.968881] sd 0:0:0:0: [sda] tag#0 ASC=0x3a ASCQ=0x3 Jan 16 17:36:19 octopi kernel: [24705.968905] sd 0:0:0:0: [sda] tag#0 CDB: opcode=0x28 28 00 00 00 00 00 00 00 08 00 Jan 16 17:36:19 octopi kernel: [24705.968932] blk_update_request: I/O error, dev sda, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jan 16 17:36:19 octopi kernel: [24705.968954] Buffer I/O error on dev sda, logical block 0, async page read Jan 16 17:36:19 octopi kernel: [24705.971691] sd 0:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 Jan 16 17:36:19 octopi kernel: [24705.971727] sd 0:0:0:0: [sda] tag#0 Sense Key : 0x2 [current] Jan 16 17:36:19 octopi kernel: [24705.971749] sd 0:0:0:0: [sda] tag#0 ASC=0x3a ASCQ=0x3 Jan 16 17:36:19 octopi kernel: [24705.971773] sd 0:0:0:0: [sda] tag#0 CDB: opcode=0x28 28 00 00 00 00 00 00 00 08 00 Jan 16 17:36:19 octopi kernel: [24705.971797] blk_update_request: I/O error, dev sda, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Jan 16 17:36:19 octopi kernel: [24705.971819] Buffer I/O error on dev sda, logical block 0, async page read Jan 16 17:36:19 octopi kernel: [24705.971882] sda: unable to read partition table Jan 16 17:36:19 octopi kernel: [24705.976187] sd 0:0:0:0: [sda] Attached SCSI removable disk Jan 16 21:28:53 octopi kernel: [38660.330600] printk: systemd: 37 output lines suppressed due to ratelimiting Jan 16 21:29:49 octopi kernel: [38716.524625] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS Jan 16 21:49:25 octopi kernel: [ 0.000000] Booting Linux on physical CPU 0x0 Jan 16 21:49:25 octopi kernel: [ 0.000000] Linux version 5.4.83-v7l+ (dom@buildbot) (gcc version 8.4.0 (Ubuntu/Linaro 8.4.0-3ubuntu1)) #1379 SMP Mon Dec 14 13:11:54 GMT 2020 Jan 16 21:49:25 octopi kernel: [ 0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d Jan 16 21:49:25 octopi kernel: [ 0.000000] CPU: div instructions available: patching division code Jan 16 21:49:25 octopi kernel: [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Jan 16 21:49:25 octopi kernel: [ 0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.1 Jan 16 21:49:25 octopi kernel: [ 0.000000] Memory policy: Data cache writealloc Jan 16 21:49:25 octopi kernel: [ 0.000000] Reserved memory: created CMA memory pool at 0x000000001ec00000, size 256 MiB Jan 16 21:49:25 octopi kernel: [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool Jan 16 21:49:25 octopi kernel: [ 0.000000] On node 0 totalpages: 491520 Jan 16 21:49:25 octopi kernel: [ 0.000000] DMA zone: 2304 pages used for memmap Jan 16 21:49:25 octopi kernel: [ 0.000000] DMA zone: 0 pages reserved Jan 16 21:49:25 octopi kernel: [ 0.000000] DMA zone: 196608 pages, LIFO batch:63 Jan 16 21:49:25 octopi kernel: [ 0.000000] HighMem zone: 294912 pages, LIFO batch:63 Jan 16 21:49:25 octopi kernel: [ 0.000000] percpu: Embedded 20 pages/cpu s49804 r8192 d23924 u81920 Jan 16 21:49:25 octopi kernel: [ 0.000000] pcpu-alloc: s49804 r8192 d23924 u81920 alloc=20*4096 Jan 16 21:49:25 octopi kernel: [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 Jan 16 21:49:25 octopi kernel: [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 489216 Jan 16 21:49:25 octopi kernel: [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=DC:A6:32:14:71:B4 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=6c586e13-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait Jan 16 21:49:25 octopi kernel: [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Jan 16 21:49:25 octopi kernel: [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Jan 16 21:49:25 octopi kernel: [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off Jan 16 21:49:25 octopi kernel: [ 0.000000] software IO TLB: mapped [mem 0x19400000-0x1d400000] (64MB) Jan 16 21:49:25 octopi kernel: [ 0.000000] Memory: 1595164K/1966080K available (10240K kernel code, 739K rwdata, 2816K rodata, 2048K init, 854K bss, 108772K reserved, 262144K cma-reserved, 1179648K highmem) Jan 16 21:49:25 octopi kernel: [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Jan 16 21:49:25 octopi kernel: [ 0.000000] ftrace: allocating 31115 entries in 61 pages Jan 16 21:49:25 octopi kernel: [ 0.000000] rcu: Hierarchical RCU implementation. Jan 16 21:49:25 octopi kernel: [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. Jan 16 21:49:25 octopi kernel: [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Jan 16 21:49:25 octopi kernel: [ 0.000000] GIC: Using split EOI/Deactivate mode Jan 16 21:49:25 octopi kernel: [ 0.000000] random: get_random_bytes called from start_kernel+0x344/0x518 with crng_init=0 Jan 16 21:49:25 octopi kernel: [ 0.000008] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns Jan 16 21:49:25 octopi kernel: [ 0.000031] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns Jan 16 21:49:25 octopi kernel: [ 0.000114] bcm2835: system timer (irq = 17) Jan 16 21:49:25 octopi kernel: [ 0.000771] arch_timer: cp15 timer(s) running at 54.00MHz (phys). Jan 16 21:49:25 octopi kernel: [ 0.000792] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns Jan 16 21:49:25 octopi kernel: [ 0.000811] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns Jan 16 21:49:25 octopi kernel: [ 0.000827] Switching to timer-based delay loop, resolution 18ns Jan 16 21:49:25 octopi kernel: [ 0.001071] Console: colour dummy device 80x30 Jan 16 21:49:25 octopi kernel: [ 0.001569] printk: console [tty1] enabled Jan 16 21:49:25 octopi kernel: [ 0.001633] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000) Jan 16 21:49:25 octopi kernel: [ 0.001676] pid_max: default: 32768 minimum: 301 Jan 16 21:49:25 octopi kernel: [ 0.001838] LSM: Security Framework initializing Jan 16 21:49:25 octopi kernel: [ 0.002045] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Jan 16 21:49:25 octopi kernel: [ 0.002092] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Jan 16 21:49:25 octopi kernel: [ 0.003452] Disabling memory control group subsystem Jan 16 21:49:25 octopi kernel: [ 0.003590] CPU: Testing write buffer coherency: ok Jan 16 21:49:25 octopi kernel: [ 0.004117] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Jan 16 21:49:25 octopi kernel: [ 0.005044] Setting up static identity map for 0x200000 - 0x20003c Jan 16 21:49:25 octopi kernel: [ 0.005270] rcu: Hierarchical SRCU implementation. Jan 16 21:49:25 octopi kernel: [ 0.005967] smp: Bringing up secondary CPUs ... Jan 16 21:49:25 octopi kernel: [ 0.007174] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Jan 16 21:49:25 octopi kernel: [ 0.008502] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 Jan 16 21:49:25 octopi kernel: [ 0.009771] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 Jan 16 21:49:25 octopi kernel: [ 0.009929] smp: Brought up 1 node, 4 CPUs Jan 16 21:49:25 octopi kernel: [ 0.010003] SMP: Total of 4 processors activated (432.00 BogoMIPS). Jan 16 21:49:25 octopi kernel: [ 0.010030] CPU: All CPU(s) started in HYP mode. Jan 16 21:49:25 octopi kernel: [ 0.010055] CPU: Virtualization extensions available. Jan 16 21:49:25 octopi kernel: [ 0.010967] devtmpfs: initialized Jan 16 21:49:25 octopi kernel: [ 0.024723] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0 Jan 16 21:49:25 octopi kernel: [ 0.025010] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns Jan 16 21:49:25 octopi kernel: [ 0.025061] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) Jan 16 21:49:25 octopi kernel: [ 0.031897] pinctrl core: initialized pinctrl subsystem Jan 16 21:49:25 octopi kernel: [ 0.032907] NET: Registered protocol family 16 Jan 16 21:49:25 octopi kernel: [ 0.036757] DMA: preallocated 1024 KiB pool for atomic coherent allocations Jan 16 21:49:25 octopi kernel: [ 0.037348] audit: initializing netlink subsys (disabled) Jan 16 21:49:25 octopi kernel: [ 0.037623] audit: type=2000 audit(0.030:1): state=initialized audit_enabled=0 res=1 Jan 16 21:49:25 octopi kernel: [ 0.038676] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Jan 16 21:49:25 octopi kernel: [ 0.038713] hw-breakpoint: maximum watchpoint size is 8 bytes. Jan 16 21:49:25 octopi kernel: [ 0.039051] Serial: AMBA PL011 UART driver Jan 16 21:49:25 octopi kernel: [ 0.042974] bcm2835-mbox fe00b880.mailbox: mailbox enabled Jan 16 21:49:25 octopi kernel: [ 0.060845] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-01-08 14:32, variant start_x Jan 16 21:49:25 octopi kernel: [ 0.070860] raspberrypi-firmware soc:firmware: Firmware hash is 194a85abd768c7334bbadc3f1911c10a7d18ed14 Jan 16 21:49:25 octopi kernel: [ 0.125862] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1 Jan 16 21:49:25 octopi kernel: [ 0.129776] vgaarb: loaded Jan 16 21:49:25 octopi kernel: [ 0.130249] SCSI subsystem initialized Jan 16 21:49:25 octopi kernel: [ 0.130500] usbcore: registered new interface driver usbfs Jan 16 21:49:25 octopi kernel: [ 0.130573] usbcore: registered new interface driver hub Jan 16 21:49:25 octopi kernel: [ 0.130709] usbcore: registered new device driver usb Jan 16 21:49:25 octopi kernel: [ 0.131112] usb_phy_generic phy: phy supply vcc not found, using dummy regulator Jan 16 21:49:25 octopi kernel: [ 0.132891] clocksource: Switched to clocksource arch_sys_counter Jan 16 21:49:25 octopi kernel: [ 0.891456] VFS: Disk quotas dquot_6.6.0 Jan 16 21:49:25 octopi kernel: [ 0.891581] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Jan 16 21:49:25 octopi kernel: [ 0.891775] FS-Cache: Loaded Jan 16 21:49:25 octopi kernel: [ 0.891982] CacheFiles: Loaded Jan 16 21:49:25 octopi kernel: [ 0.892950] simple-framebuffer 3ea50000.framebuffer: framebuffer at 0x3ea50000, 0x177000 bytes, mapped to 0x(ptrval) Jan 16 21:49:25 octopi kernel: [ 0.892993] simple-framebuffer 3ea50000.framebuffer: format=a8r8g8b8, mode=800x480x32, linelength=3200 Jan 16 21:49:25 octopi kernel: [ 0.895329] Console: switching to colour frame buffer device 100x30 Jan 16 21:49:25 octopi kernel: [ 0.898356] simple-framebuffer 3ea50000.framebuffer: fb0: simplefb registered! Jan 16 21:49:25 octopi kernel: [ 0.909817] thermal_sys: Registered thermal governor 'step_wise' Jan 16 21:49:25 octopi kernel: [ 0.910175] NET: Registered protocol family 2 Jan 16 21:49:25 octopi kernel: [ 0.913171] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) Jan 16 21:49:25 octopi kernel: [ 0.914324] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Jan 16 21:49:25 octopi kernel: [ 0.915497] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) Jan 16 21:49:25 octopi kernel: [ 0.916669] TCP: Hash tables configured (established 8192 bind 8192) Jan 16 21:49:25 octopi kernel: [ 0.917916] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Jan 16 21:49:25 octopi kernel: [ 0.919047] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Jan 16 21:49:25 octopi kernel: [ 0.920419] NET: Registered protocol family 1 Jan 16 21:49:25 octopi kernel: [ 0.922274] RPC: Registered named UNIX socket transport module. Jan 16 21:49:25 octopi kernel: [ 0.923467] RPC: Registered udp transport module. Jan 16 21:49:25 octopi kernel: [ 0.924619] RPC: Registered tcp transport module. Jan 16 21:49:25 octopi kernel: [ 0.925735] RPC: Registered tcp NFSv4.1 backchannel transport module. Jan 16 21:49:25 octopi kernel: [ 0.926845] PCI: CLS 0 bytes, default 64 Jan 16 21:49:25 octopi kernel: [ 0.929783] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available Jan 16 21:49:25 octopi kernel: [ 0.933179] Initialise system trusted keyrings Jan 16 21:49:25 octopi kernel: [ 0.934518] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Jan 16 21:49:25 octopi kernel: [ 0.946783] FS-Cache: Netfs 'nfs' registered for caching Jan 16 21:49:25 octopi kernel: [ 0.948664] NFS: Registering the id_resolver key type Jan 16 21:49:25 octopi kernel: [ 0.949813] Key type id_resolver registered Jan 16 21:49:25 octopi kernel: [ 0.950909] Key type id_legacy registered Jan 16 21:49:25 octopi kernel: [ 0.951982] nfs4filelayout_init: NFSv4 File Layout Driver Registering... Jan 16 21:49:25 octopi kernel: [ 0.954241] Key type asymmetric registered Jan 16 21:49:25 octopi kernel: [ 0.955300] Asymmetric key parser 'x509' registered Jan 16 21:49:25 octopi kernel: [ 0.956520] bounce: pool size: 64 pages Jan 16 21:49:25 octopi kernel: [ 0.957562] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) Jan 16 21:49:25 octopi kernel: [ 0.958856] io scheduler mq-deadline registered Jan 16 21:49:25 octopi kernel: [ 0.959884] io scheduler kyber registered Jan 16 21:49:25 octopi kernel: [ 0.965022] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges: Jan 16 21:49:25 octopi kernel: [ 0.966051] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff] Jan 16 21:49:25 octopi kernel: [ 0.968078] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x0603ffffff -> 0x00f8000000 Jan 16 21:49:25 octopi kernel: [ 0.969183] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x007fffffff -> 0x0400000000 Jan 16 21:49:25 octopi kernel: [ 1.025004] brcm-pcie fd500000.pcie: link up, 5 GT/s x1 (SSC) Jan 16 21:49:25 octopi kernel: [ 1.026318] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00 Jan 16 21:49:25 octopi kernel: [ 1.027331] pci_bus 0000:00: root bus resource [bus 00-ff] Jan 16 21:49:25 octopi kernel: [ 1.028369] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff]) Jan 16 21:49:25 octopi kernel: [ 1.030481] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400 Jan 16 21:49:25 octopi kernel: [ 1.031792] pci 0000:00:00.0: PME# supported from D0 D3hot Jan 16 21:49:25 octopi kernel: [ 1.036165] PCI: bus0: Fast back to back transfers disabled Jan 16 21:49:25 octopi kernel: [ 1.037408] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330 Jan 16 21:49:25 octopi kernel: [ 1.038564] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] Jan 16 21:49:25 octopi kernel: [ 1.040007] pci 0000:01:00.0: PME# supported from D0 D3cold Jan 16 21:49:25 octopi kernel: [ 1.044331] PCI: bus1: Fast back to back transfers disabled Jan 16 21:49:25 octopi kernel: [ 1.045410] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff] Jan 16 21:49:25 octopi kernel: [ 1.046464] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit] Jan 16 21:49:25 octopi kernel: [ 1.047551] pci 0000:00:00.0: PCI bridge to [bus 01] Jan 16 21:49:25 octopi kernel: [ 1.048571] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff] Jan 16 21:49:25 octopi kernel: [ 1.049919] pcieport 0000:00:00.0: enabling device (0140 -> 0142) Jan 16 21:49:25 octopi kernel: [ 1.051159] pcieport 0000:00:00.0: PME: Signaling with IRQ 55 Jan 16 21:49:25 octopi kernel: [ 1.052567] pcieport 0000:00:00.0: AER: enabled with IRQ 55 Jan 16 21:49:25 octopi kernel: [ 1.053953] pci 0000:01:00.0: enabling device (0140 -> 0142) Jan 16 21:49:25 octopi kernel: [ 1.062219] iproc-rng200 fe104000.rng: hwrng registered Jan 16 21:49:25 octopi kernel: [ 1.063590] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) Jan 16 21:49:25 octopi kernel: [ 1.065265] vc-sm: Videocore shared memory driver Jan 16 21:49:25 octopi kernel: [ 1.066815] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000 Jan 16 21:49:25 octopi kernel: [ 1.080129] brd: module loaded Jan 16 21:49:25 octopi kernel: [ 1.093720] loop: module loaded Jan 16 21:49:25 octopi kernel: [ 1.096177] Loading iSCSI transport class v2.0-870. Jan 16 21:49:25 octopi kernel: [ 1.099191] libphy: Fixed MDIO Bus: probed Jan 16 21:49:25 octopi kernel: [ 1.100799] bcmgenet fd580000.ethernet: failed to get enet clock Jan 16 21:49:25 octopi kernel: [ 1.101776] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000 Jan 16 21:49:25 octopi kernel: [ 1.102723] bcmgenet fd580000.ethernet: failed to get enet-wol clock Jan 16 21:49:25 octopi kernel: [ 1.103768] bcmgenet fd580000.ethernet: failed to get enet-eee clock Jan 16 21:49:25 octopi kernel: [ 1.104697] bcmgenet: Skipping UMAC reset Jan 16 21:49:25 octopi kernel: [ 1.122946] libphy: bcmgenet MII bus: probed Jan 16 21:49:25 octopi kernel: [ 1.213001] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus Jan 16 21:49:25 octopi kernel: [ 1.214966] usbcore: registered new interface driver r8152 Jan 16 21:49:25 octopi kernel: [ 1.215941] usbcore: registered new interface driver lan78xx Jan 16 21:49:25 octopi kernel: [ 1.216877] usbcore: registered new interface driver smsc95xx Jan 16 21:49:25 octopi kernel: [ 1.218171] xhci_hcd 0000:01:00.0: xHCI Host Controller Jan 16 21:49:25 octopi kernel: [ 1.219065] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 Jan 16 21:49:25 octopi kernel: [ 1.223418] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000003000000890 Jan 16 21:49:25 octopi kernel: [ 1.226454] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 Jan 16 21:49:25 octopi kernel: [ 1.227437] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jan 16 21:49:25 octopi kernel: [ 1.228411] usb usb1: Product: xHCI Host Controller Jan 16 21:49:25 octopi kernel: [ 1.229369] usb usb1: Manufacturer: Linux 5.4.83-v7l+ xhci-hcd Jan 16 21:49:25 octopi kernel: [ 1.230308] usb usb1: SerialNumber: 0000:01:00.0 Jan 16 21:49:25 octopi kernel: [ 1.231837] hub 1-0:1.0: USB hub found Jan 16 21:49:25 octopi kernel: [ 1.232814] hub 1-0:1.0: 1 port detected Jan 16 21:49:25 octopi kernel: [ 1.234282] xhci_hcd 0000:01:00.0: xHCI Host Controller Jan 16 21:49:25 octopi kernel: [ 1.235172] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 Jan 16 21:49:25 octopi kernel: [ 1.236076] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed Jan 16 21:49:25 octopi kernel: [ 1.237483] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04 Jan 16 21:49:25 octopi kernel: [ 1.238405] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jan 16 21:49:25 octopi kernel: [ 1.239331] usb usb2: Product: xHCI Host Controller Jan 16 21:49:25 octopi kernel: [ 1.240253] usb usb2: Manufacturer: Linux 5.4.83-v7l+ xhci-hcd Jan 16 21:49:25 octopi kernel: [ 1.241212] usb usb2: SerialNumber: 0000:01:00.0 Jan 16 21:49:25 octopi kernel: [ 1.242729] hub 2-0:1.0: USB hub found Jan 16 21:49:25 octopi kernel: [ 1.243784] hub 2-0:1.0: 4 ports detected Jan 16 21:49:25 octopi kernel: [ 1.246216] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) Jan 16 21:49:25 octopi kernel: [ 1.247454] dwc_otg: FIQ enabled Jan 16 21:49:25 octopi kernel: [ 1.247467] dwc_otg: NAK holdoff enabled Jan 16 21:49:25 octopi kernel: [ 1.247479] dwc_otg: FIQ split-transaction FSM enabled Jan 16 21:49:25 octopi kernel: [ 1.247495] Module dwc_common_port init Jan 16 21:49:25 octopi kernel: [ 1.247950] usbcore: registered new interface driver uas Jan 16 21:49:25 octopi kernel: [ 1.248993] usbcore: registered new interface driver usb-storage Jan 16 21:49:25 octopi kernel: [ 1.250127] mousedev: PS/2 mouse device common for all mice Jan 16 21:49:25 octopi kernel: [ 1.253083] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer Jan 16 21:49:25 octopi kernel: [ 1.257494] sdhci: Secure Digital Host Controller Interface driver Jan 16 21:49:25 octopi kernel: [ 1.258459] sdhci: Copyright(c) Pierre Ossman Jan 16 21:49:25 octopi kernel: [ 1.260009] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe Jan 16 21:49:25 octopi kernel: [ 1.261569] sdhci-pltfm: SDHCI platform and OF driver helper Jan 16 21:49:25 octopi kernel: [ 1.266440] ledtrig-cpu: registered to indicate activity on CPUs Jan 16 21:49:25 octopi kernel: [ 1.267653] hidraw: raw HID events driver (C) Jiri Kosina Jan 16 21:49:25 octopi kernel: [ 1.268764] usbcore: registered new interface driver usbhid Jan 16 21:49:25 octopi kernel: [ 1.269688] usbhid: USB HID core driver Jan 16 21:49:25 octopi kernel: [ 1.271660] vchiq: vchiq_init_state: slot_zero = (ptrval) Jan 16 21:49:25 octopi kernel: [ 1.274650] [vc_sm_connected_init]: start Jan 16 21:49:25 octopi kernel: [ 1.283768] [vc_sm_connected_init]: end - returning 0 Jan 16 21:49:25 octopi kernel: [ 1.286911] Initializing XFRM netlink socket Jan 16 21:49:25 octopi kernel: [ 1.287865] NET: Registered protocol family 17 Jan 16 21:49:25 octopi kernel: [ 1.288858] Key type dns_resolver registered Jan 16 21:49:25 octopi kernel: [ 1.290053] Registering SWP/SWPB emulation handler Jan 16 21:49:25 octopi kernel: [ 1.291271] registered taskstats version 1 Jan 16 21:49:25 octopi kernel: [ 1.292146] Loading compiled-in X.509 certificates Jan 16 21:49:25 octopi kernel: [ 1.293597] Key type ._fscrypt registered Jan 16 21:49:25 octopi kernel: [ 1.294469] Key type .fscrypt registered Jan 16 21:49:25 octopi kernel: [ 1.306106] uart-pl011 fe201000.serial: cts_event_workaround enabled Jan 16 21:49:25 octopi kernel: [ 1.307094] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 29, base_baud = 0) is a PL011 rev2 Jan 16 21:49:25 octopi kernel: [ 1.314220] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver Jan 16 21:49:25 octopi kernel: [ 1.316206] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0 Jan 16 21:49:25 octopi kernel: [ 1.317179] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated Jan 16 21:49:25 octopi kernel: [ 1.369456] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) Jan 16 21:49:25 octopi kernel: [ 1.372086] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) Jan 16 21:49:25 octopi kernel: [ 1.374703] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) Jan 16 21:49:25 octopi kernel: [ 1.378561] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) Jan 16 21:49:25 octopi kernel: [ 1.381060] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) Jan 16 21:49:25 octopi kernel: [ 1.385762] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA Jan 16 21:49:25 octopi kernel: [ 1.389588] of_cfs_init Jan 16 21:49:25 octopi kernel: [ 1.390545] of_cfs_init: OK Jan 16 21:49:25 octopi kernel: [ 1.392524] Waiting for root device PARTUUID=6c586e13-02... Jan 16 21:49:25 octopi kernel: [ 1.429191] random: fast init done Jan 16 21:49:25 octopi kernel: [ 1.455406] mmc1: new high speed SDIO card at address 0001 Jan 16 21:49:25 octopi kernel: [ 1.496552] mmc0: new ultra high speed DDR50 SDHC card at address aaaa Jan 16 21:49:25 octopi kernel: [ 1.498300] mmcblk0: mmc0:aaaa SS16G 14.8 GiB Jan 16 21:49:25 octopi kernel: [ 1.502428] mmcblk0: p1 p2 Jan 16 21:49:25 octopi kernel: [ 1.525586] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) Jan 16 21:49:25 octopi kernel: [ 1.526546] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. Jan 16 21:49:25 octopi kernel: [ 1.532541] devtmpfs: mounted Jan 16 21:49:25 octopi kernel: [ 1.542117] Freeing unused kernel memory: 2048K Jan 16 21:49:25 octopi kernel: [ 1.563202] Run /sbin/init as init process Jan 16 21:49:25 octopi kernel: [ 1.602945] usb 1-1: new high-speed USB device number 2 using xhci_hcd Jan 16 21:49:25 octopi kernel: [ 1.785708] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21 Jan 16 21:49:25 octopi kernel: [ 1.786690] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 Jan 16 21:49:25 octopi kernel: [ 1.787591] usb 1-1: Product: USB2.0 Hub Jan 16 21:49:25 octopi kernel: [ 1.790495] hub 1-1:1.0: USB hub found Jan 16 21:49:25 octopi kernel: [ 1.791622] hub 1-1:1.0: 4 ports detected Jan 16 21:49:25 octopi kernel: [ 2.113039] usb 1-1.3: new full-speed USB device number 3 using xhci_hcd Jan 16 21:49:25 octopi kernel: [ 2.124346] NET: Registered protocol family 10 Jan 16 21:49:25 octopi kernel: [ 2.126690] Segment Routing with IPv6 Jan 16 21:49:25 octopi kernel: [ 2.254029] usb 1-1.3: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.01 Jan 16 21:49:25 octopi kernel: [ 2.255176] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Jan 16 21:49:25 octopi kernel: [ 2.256290] usb 1-1.3: Product: USB Receiver Jan 16 21:49:25 octopi kernel: [ 2.257381] usb 1-1.3: Manufacturer: Logitech Jan 16 21:49:25 octopi kernel: [ 2.271374] input: Logitech USB Receiver as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:046D:C52B.0001/input/input0 Jan 16 21:49:25 octopi kernel: [ 2.344016] hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:01:00.0-1.3/input0 Jan 16 21:49:25 octopi kernel: [ 2.357688] input: Logitech USB Receiver Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:046D:C52B.0002/input/input1 Jan 16 21:49:25 octopi kernel: [ 2.360845] input: Logitech USB Receiver Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:046D:C52B.0002/input/input2 Jan 16 21:49:25 octopi kernel: [ 2.433450] input: Logitech USB Receiver System Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:046D:C52B.0002/input/input3 Jan 16 21:49:25 octopi kernel: [ 2.437047] hid-generic 0003:046D:C52B.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:01:00.0-1.3/input1 Jan 16 21:49:25 octopi kernel: [ 2.449115] hid-generic 0003:046D:C52B.0003: hiddev97,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:01:00.0-1.3/input2 Jan 16 21:49:25 octopi kernel: [ 2.563001] usb 1-1.4: new full-speed USB device number 4 using xhci_hcd Jan 16 21:49:25 octopi kernel: [ 2.700583] usb 1-1.4: New USB device found, idVendor=1d50, idProduct=6029, bcdDevice= 1.00 Jan 16 21:49:25 octopi kernel: [ 2.702009] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Jan 16 21:49:25 octopi kernel: [ 2.703420] usb 1-1.4: Product: Marlin USB Device Jan 16 21:49:25 octopi kernel: [ 2.704774] usb 1-1.4: Manufacturer: marlinfw.org Jan 16 21:49:25 octopi kernel: [ 2.706112] usb 1-1.4: SerialNumber: 0AFF600FAF4904675D51EC3DF50020C5 Jan 16 21:49:25 octopi kernel: [ 2.713827] usb-storage 1-1.4:1.2: USB Mass Storage device detected Jan 16 21:49:25 octopi kernel: [ 2.715806] scsi host0: usb-storage 1-1.4:1.2 Jan 16 21:49:25 octopi kernel: [ 3.077778] random: systemd: uninitialized urandom read (16 bytes read) Jan 16 21:49:25 octopi kernel: [ 3.105599] random: systemd: uninitialized urandom read (16 bytes read) Jan 16 21:49:25 octopi kernel: [ 3.110760] random: systemd: uninitialized urandom read (16 bytes read) Jan 16 21:49:25 octopi kernel: [ 3.754678] scsi 0:0:0:0: Direct-Access Marlin SDCard 01 1.0 PQ: 0 ANSI: 0 CCS Jan 16 21:49:25 octopi kernel: [ 3.820464] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) Jan 16 21:49:25 octopi kernel: [ 3.844962] sd 0:0:0:0: [sda] Attached SCSI removable disk Jan 16 21:49:25 octopi kernel: [ 4.504166] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x00010000 Jan 16 21:49:25 octopi kernel: [ 4.504677] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00001000 Jan 16 21:49:25 octopi kernel: [ 4.505145] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x00010000 Jan 16 21:49:25 octopi kernel: [ 4.505628] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x00010000 Jan 16 21:49:25 octopi kernel: [ 4.592950] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. Jan 16 21:49:25 octopi kernel: [ 4.595570] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. Jan 16 21:49:25 octopi kernel: [ 4.597615] bcm2835_vc_sm_cma_probe: Videocore shared memory driver Jan 16 21:49:25 octopi kernel: [ 4.597638] [vc_sm_connected_init]: start Jan 16 21:49:25 octopi kernel: [ 4.600208] mc: Linux media interface: v0.10 Jan 16 21:49:25 octopi kernel: [ 4.605748] [vc_sm_connected_init]: installed successfully Jan 16 21:49:25 octopi kernel: [ 4.631202] bcm2835_audio bcm2835_audio: card created with 8 channels Jan 16 21:49:25 octopi kernel: [ 4.635275] videodev: Linux video capture interface: v2.00 Jan 16 21:49:25 octopi kernel: [ 4.675209] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. Jan 16 21:49:25 octopi kernel: [ 4.676622] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. Jan 16 21:49:25 octopi kernel: [ 4.684286] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. Jan 16 21:49:25 octopi kernel: [ 4.699012] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. Jan 16 21:49:25 octopi kernel: [ 4.708651] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned. Jan 16 21:49:25 octopi kernel: [ 4.885122] cfg80211: Loading compiled-in X.509 certificates for regulatory database Jan 16 21:49:25 octopi kernel: [ 4.908900] vc4-drm gpu: bound fe600000.firmwarekms (ops vc4_fkms_ops [vc4]) Jan 16 21:49:25 octopi kernel: [ 4.908922] checking generic (3ea50000 177000) vs hw (0 ffffffffffffffff) Jan 16 21:49:25 octopi kernel: [ 4.908937] fb0: switching to vc4drmfb from simple Jan 16 21:49:25 octopi kernel: [ 4.910165] Console: switching to colour dummy device 80x30 Jan 16 21:49:25 octopi kernel: [ 4.910435] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). Jan 16 21:49:25 octopi kernel: [ 4.910448] [drm] No driver support for vblank timestamp query. Jan 16 21:49:25 octopi kernel: [ 4.910462] [drm] Setting vblank_disable_immediate to false because get_vblank_timestamp == NULL Jan 16 21:49:25 octopi kernel: [ 4.916894] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 0 Jan 16 21:49:25 octopi kernel: [ 4.943288] Console: switching to colour frame buffer device 100x30 Jan 16 21:49:25 octopi kernel: [ 4.947657] vc4-drm gpu: fb0: vc4drmfb frame buffer device Jan 16 21:49:25 octopi kernel: [ 4.987876] cdc_acm 1-1.4:1.0: ttyACM0: USB ACM device Jan 16 21:49:25 octopi kernel: [ 4.989447] usbcore: registered new interface driver cdc_acm Jan 16 21:49:25 octopi kernel: [ 4.989463] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters Jan 16 21:49:25 octopi kernel: [ 5.024832] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' Jan 16 21:49:25 octopi kernel: [ 5.085432] brcmfmac: F1 signature read @0x18000000=0x15264345 Jan 16 21:49:25 octopi kernel: [ 5.091298] input: raspberrypi-ts as /devices/platform/soc/soc:firmware/soc:firmware:touchscreen/input/input5 Jan 16 21:49:25 octopi kernel: [ 5.098249] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 Jan 16 21:49:25 octopi kernel: [ 5.099138] usbcore: registered new interface driver brcmfmac Jan 16 21:49:25 octopi kernel: [ 5.124201] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.txt failed with error -2 Jan 16 21:49:25 octopi kernel: [ 5.162511] sd 0:0:0:0: Attached scsi generic sg0 type 0 Jan 16 21:49:25 octopi kernel: [ 5.244356] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 1 Jan 16 21:49:25 octopi kernel: [ 5.339642] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 Jan 16 21:49:25 octopi kernel: [ 5.340241] bcm2835-codec bcm2835-codec: Loaded V4L2 decode Jan 16 21:49:25 octopi kernel: [ 5.341315] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13 Jan 16 21:49:25 octopi kernel: [ 5.342482] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14 Jan 16 21:49:25 octopi kernel: [ 5.344676] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15 Jan 16 21:49:25 octopi kernel: [ 5.346221] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16 Jan 16 21:49:25 octopi kernel: [ 5.346317] bcm2835-isp bcm2835-isp: Register output node 0 with media controller Jan 16 21:49:25 octopi kernel: [ 5.346374] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller Jan 16 21:49:25 octopi kernel: [ 5.346464] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller Jan 16 21:49:25 octopi kernel: [ 5.346554] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller Jan 16 21:49:25 octopi kernel: [ 5.347825] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp Jan 16 21:49:25 octopi kernel: [ 5.357899] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 Jan 16 21:49:25 octopi kernel: [ 5.358051] bcm2835-codec bcm2835-codec: Loaded V4L2 encode Jan 16 21:49:25 octopi kernel: [ 5.370797] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 Jan 16 21:49:25 octopi kernel: [ 5.370975] bcm2835-codec bcm2835-codec: Loaded V4L2 isp Jan 16 21:49:25 octopi kernel: [ 5.372476] bcm2835-v4l2: scene mode selected 0, was 0 Jan 16 21:49:25 octopi kernel: [ 5.373513] bcm2835-v4l2: V4L2 device registered as video0 - stills mode > 1280x720 Jan 16 21:49:25 octopi kernel: [ 5.374890] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 Jan 16 21:49:25 octopi kernel: [ 5.379700] bcm2835-v4l2: Broadcom 2835 MMAL video capture ver 0.0.2 loaded. Jan 16 21:49:25 octopi kernel: [ 5.387731] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Mar 23 2020 02:19:54 version 7.45.206 (r725000 CY) FWID 01-88ee44ea Jan 16 21:49:25 octopi kernel: [ 5.668449] logitech-djreceiver 0003:046D:C52B.0003: hiddev96,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:01:00.0-1.3/input2 Jan 16 21:49:25 octopi kernel: [ 5.810881] input: Logitech Unifying Device. Wireless PID:405b Keyboard as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0003/0003:046D:405B.0004/input/input6 Jan 16 21:49:25 octopi kernel: [ 5.812242] input: Logitech Unifying Device. Wireless PID:405b Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0003/0003:046D:405B.0004/input/input7 Jan 16 21:49:25 octopi kernel: [ 5.812614] input: Logitech Unifying Device. Wireless PID:405b System Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0003/0003:046D:405B.0004/input/input8 Jan 16 21:49:25 octopi kernel: [ 5.813132] hid-generic 0003:046D:405B.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:405b] on usb-0000:01:00.0-1.3/input2:1 Jan 16 21:49:25 octopi kernel: [ 5.817422] input: Logitech Unifying Device. Wireless PID:4069 Keyboard as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0003/0003:046D:4069.0005/input/input12 Jan 16 21:49:25 octopi kernel: [ 5.824183] input: Logitech Unifying Device. Wireless PID:4069 Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0003/0003:046D:4069.0005/input/input13 Jan 16 21:49:25 octopi kernel: [ 5.824961] input: Logitech Unifying Device. Wireless PID:4069 Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0003/0003:046D:4069.0005/input/input14 Jan 16 21:49:25 octopi kernel: [ 5.825638] input: Logitech Unifying Device. Wireless PID:4069 System Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0003/0003:046D:4069.0005/input/input15 Jan 16 21:49:25 octopi kernel: [ 5.826180] hid-generic 0003:046D:4069.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4069] on usb-0000:01:00.0-1.3/input2:2 Jan 16 21:49:25 octopi kernel: [ 7.416876] random: crng init done Jan 16 21:49:25 octopi kernel: [ 7.416894] random: 7 urandom warning(s) missed due to ratelimiting Jan 16 21:49:25 octopi kernel: [ 7.642474] 8021q: 802.1Q VLAN Support v1.8 Jan 16 21:49:25 octopi kernel: [ 7.656441] uart-pl011 fe201000.serial: no DMA platform data Jan 16 21:49:25 octopi kernel: [ 8.133718] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS Jan 16 21:49:25 octopi kernel: [ 8.197021] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled Jan 16 21:49:26 octopi kernel: [ 8.580000] bcmgenet: Skipping UMAC reset Jan 16 21:49:26 octopi kernel: [ 8.586345] bcmgenet fd580000.ethernet: configuring instance for external RGMII Jan 16 21:49:26 octopi kernel: [ 8.589855] bcmgenet fd580000.ethernet eth0: Link is Down Jan 16 21:49:27 octopi kernel: [ 9.618152] input: Logitech K780 as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0003/0003:046D:405B.0004/input/input19 Jan 16 21:49:27 octopi kernel: [ 9.618709] logitech-hidpp-device 0003:046D:405B.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech K780] on usb-0000:01:00.0-1.3/input2:1 Jan 16 21:49:27 octopi kernel: [ 10.214281] input: Logitech MX Master 2S as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0003/0003:046D:4069.0005/input/input20 Jan 16 21:49:27 octopi kernel: [ 10.216782] logitech-hidpp-device 0003:046D:4069.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech MX Master 2S] on usb-0000:01:00.0-1.3/input2:2 Jan 16 21:49:31 octopi kernel: [ 14.314594] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready Jan 16 21:49:32 octopi kernel: [ 14.425572] Bluetooth: Core ver 2.22 Jan 16 21:49:32 octopi kernel: [ 14.425635] NET: Registered protocol family 31 Jan 16 21:49:32 octopi kernel: [ 14.425645] Bluetooth: HCI device and connection manager initialized Jan 16 21:49:32 octopi kernel: [ 14.425663] Bluetooth: HCI socket layer initialized Jan 16 21:49:32 octopi kernel: [ 14.425677] Bluetooth: L2CAP socket layer initialized Jan 16 21:49:32 octopi kernel: [ 14.425708] Bluetooth: SCO socket layer initialized Jan 16 21:49:32 octopi kernel: [ 14.436164] Bluetooth: HCI UART driver ver 2.3 Jan 16 21:49:32 octopi kernel: [ 14.436178] Bluetooth: HCI UART protocol H4 registered Jan 16 21:49:32 octopi kernel: [ 14.436245] Bluetooth: HCI UART protocol Three-wire (H5) registered Jan 16 21:49:32 octopi kernel: [ 14.436468] Bluetooth: HCI UART protocol Broadcom registered Jan 16 21:49:32 octopi kernel: [ 14.646791] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Jan 16 21:49:32 octopi kernel: [ 14.646798] Bluetooth: BNEP filters: protocol multicast Jan 16 21:49:32 octopi kernel: [ 14.646810] Bluetooth: BNEP socket layer initialized Jan 16 21:49:33 octopi kernel: [ 15.919609] ICMPv6: process `dhcpcd' is using deprecated sysctl (syscall) net.ipv6.neigh.wlan0.retrans_time - use net.ipv6.neigh.wlan0.retrans_time_ms instead