2021-02-03 16:03:18,095 - octoprint.server - INFO - --- Log roll over detected ---------------------------------------------------
2021-02-03 16:03:18,095 - octoprint.server - INFO - OctoPrint 1.3.5 (master branch)
2021-02-03 16:03:18,099 - octoprint.plugin.core - INFO - 23 plugin(s) registered with the system:
|  Announcement Plugin (bundled) = /home/pi/oprint/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/plugins/announcements
|  Core Wizard (bundled) = /home/pi/oprint/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/plugins/corewizard
|  Cost Plugin (0.1.3) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_cost
|  CuraEngine (<= 15.04) (bundled) = /home/pi/oprint/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/plugins/cura
|  Custom Control Editor (0.2.1) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_customControl
|  Detailed Progress Plugin (0.1.4) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_detailedprogress
|  Discovery (bundled) = /home/pi/oprint/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/plugins/discovery
|  EEPROM Marlin Editor Plugin (1.0.4) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_eeprom_marlin
|  Enclosure Plugin (3.51) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_enclosure
|  FileManager (0.1.2) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_filemanager
|  M33 Fio (1.21) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_m33fio
|  Multi Colors (1.0.7) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_multi_colors
|  Plugin Manager (bundled) = /home/pi/oprint/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/plugins/pluginmanager
|  PortLister (0.1.6) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_portlister
|  Print History Plugin (1.2) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_printhistory
|  Printer Stats (1.0.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_stats
|  PSU Control (0.1.5) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_psucontrol
|  SnapStream (0.2.3) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_snapstream
|  Software Update (bundled) = /home/pi/oprint/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/plugins/softwareupdate
|  STL Viewer (0.3.1) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_stlviewer
| !TouchUI (0.3.6) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_touchui
|  Virtual Printer (bundled) = /home/pi/oprint/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/plugins/virtual_printer
|  Yamlpatcher (0.1.1) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_yamlpatcher
2021-02-03 16:03:18,099 - octoprint.server - INFO - ------------------------------------------------------------------------------
2021-02-03 16:03:18,090 - tornado.access - WARNING - 404 GET /static/img/progressbar.gif (127.0.0.1) 16.05ms
2021-02-03 16:03:18,117 - tornado.access - WARNING - 404 GET /static/img/loading.gif (127.0.0.1) 14.10ms
2021-02-03 16:03:18,312 - tornado.access - WARNING - 404 GET /img/tentacle-20x20.png (127.0.0.1) 17.41ms
2021-02-03 16:03:18,335 - tornado.access - WARNING - 404 GET /img/icon-sd-black-14.png (127.0.0.1) 18.85ms
2021-02-03 16:03:18,474 - tornado.access - WARNING - 404 GET /img/graph-background.png (127.0.0.1) 19.24ms
2021-02-03 16:03:29,228 - octoprint.plugins.psucontrol - INFO - Switching PSU On
2021-02-03 16:03:30,395 - octoprint.plugins.portlister - INFO - on_port_created connection_options {'portPreference': 'AUTO', 'autoconnect': True, 'baudrates': [115200, 250000, 230400, 57600, 38400, 19200, 9600], 'ports': ['/dev/ttyUSB0'], 'baudratePreference': 115200}
2021-02-03 16:03:30,397 - octoprint.plugins.portlister - INFO - Checking if /dev/ttyUSB0 is in ['/dev/ttyUSB0']
2021-02-03 16:03:30,400 - octoprint.plugins.portlister - INFO - autoconnect_delay 20
2021-02-03 16:03:50,405 - octoprint.plugins.portlister - INFO - do_auto_connect
2021-02-03 16:03:50,409 - octoprint.plugins.portlister - INFO - realpath match
2021-02-03 16:03:50,479 - octoprint.plugins.portlister - INFO - Attempting to connect to AUTO at 115200 with profile '_default'
2021-02-03 16:03:50,616 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-02-03 16:03:52,082 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-02-03 16:03:54,680 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-02-03 16:03:54,943 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin SkyNet3D-v2.3.1 (Github)"
2021-02-03 16:15:30,268 - octoprint.filemanager.analysis - INFO - Starting analysis of local:Cable_Carrier_Link_PLA_0.2.gcode
2021-02-03 16:15:30,275 - octoprint.filemanager.analysis - INFO - Invoking analysis command: /home/pi/oprint/bin/python -m octoprint analysis gcode --speed-x=6000 --speed-y=6000 --max-t=10 --throttle=0.0 --throttle-lines=100 /home/pi/.octoprint/uploads/Cable_Carrier_Link_PLA_0.2.gcode
2021-02-03 16:15:39,101 - octoprint.plugins.detailedprogress - INFO - Printing started. Detailed progress started.
2021-02-03 16:15:39,107 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-02-03 16:18:16,597 - octoprint.timelapse - ERROR - Could not capture image /home/pi/.octoprint/timelapse/tmp/Cable_Carrier_Link_PLA_0.2_20210203161539-0.jpg from http://octopi.local/webcam/?action=snapshot
Traceback (most recent call last):
  File "/home/pi/oprint/local/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/timelapse.py", line 560, in _perform_capture
    r.raise_for_status()
  File "/home/pi/oprint/local/lib/python2.7/site-packages/requests-2.7.0-py2.7.egg/requests/models.py", line 851, in raise_for_status
    raise HTTPError(http_error_msg, response=self)
HTTPError: 503 Server Error: Service Unavailable
2021-02-03 16:18:19,623 - octoprint.timelapse - ERROR - Could not capture image /home/pi/.octoprint/timelapse/tmp/Cable_Carrier_Link_PLA_0.2_20210203161539-1.jpg from http://octopi.local/webcam/?action=snapshot
Traceback (most recent call last):
  File "/home/pi/oprint/local/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/timelapse.py", line 560, in _perform_capture
    r.raise_for_status()
  File "/home/pi/oprint/local/lib/python2.7/site-packages/requests-2.7.0-py2.7.egg/requests/models.py", line 851, in raise_for_status
    raise HTTPError(http_error_msg, response=self)
HTTPError: 503 Server Error: Service Unavailable
2021-02-03 16:21:09,559 - octoprint.timelapse - ERROR - Could not capture image /home/pi/.octoprint/timelapse/tmp/Cable_Carrier_Link_PLA_0.2_20210203161539-0.jpg from http://octopi.local/webcam/?action=snapshot
Traceback (most recent call last):
  File "/home/pi/oprint/local/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/timelapse.py", line 560, in _perform_capture
    r.raise_for_status()
  File "/home/pi/oprint/local/lib/python2.7/site-packages/requests-2.7.0-py2.7.egg/requests/models.py", line 851, in raise_for_status
    raise HTTPError(http_error_msg, response=self)
HTTPError: 503 Server Error: Service Unavailable
2021-02-03 16:24:00,666 - octoprint.timelapse - ERROR - Could not capture image /home/pi/.octoprint/timelapse/tmp/Cable_Carrier_Link_PLA_0.2_20210203161539-0.jpg from http://octopi.local/webcam/?action=snapshot
Traceback (most recent call last):
  File "/home/pi/oprint/local/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/timelapse.py", line 560, in _perform_capture
    r.raise_for_status()
  File "/home/pi/oprint/local/lib/python2.7/site-packages/requests-2.7.0-py2.7.egg/requests/models.py", line 851, in raise_for_status
    raise HTTPError(http_error_msg, response=self)
HTTPError: 503 Server Error: Service Unavailable
2021-02-03 16:26:16,237 - octoprint.filemanager.analysis - INFO - Starting analysis of local:Cable_Carrier_Link_PLA_0.2.gcode
2021-02-03 16:26:16,255 - octoprint.filemanager.analysis - INFO - Invoking analysis command: /home/pi/oprint/bin/python -m octoprint analysis gcode --speed-x=6000 --speed-y=6000 --max-t=10 --throttle=0.0 --throttle-lines=100 /home/pi/.octoprint/uploads/Cable_Carrier_Link_PLA_0.2.gcode
2021-02-03 16:26:20,522 - octoprint.plugins.detailedprogress - INFO - Printing stopped. Detailed progress stopped.
2021-02-03 16:26:21,238 - octoprint.plugins.detailedprogress - INFO - Printing stopped. Detailed progress stopped.
2021-02-03 16:26:21,282 - octoprint.plugins.printhistory - INFO - Can't parse additional parameters from /home/pi/.octoprint/uploads/Cable_Carrier_Link_PLA_0.2.gcode
2021-02-03 16:26:53,388 - octoprint.filemanager.analysis - INFO - Analysis of entry local:Cable_Carrier_Link_PLA_0.2.gcode finished, needed 37.15s
2021-02-03 16:28:32,231 - octoprint.filemanager.analysis - INFO - Starting analysis of local:Cable_Carrier_Link_Brim_PLA_0.2.gcode
2021-02-03 16:28:32,236 - octoprint.filemanager.analysis - INFO - Invoking analysis command: /home/pi/oprint/bin/python -m octoprint analysis gcode --speed-x=6000 --speed-y=6000 --max-t=10 --throttle=0.0 --throttle-lines=100 /home/pi/.octoprint/uploads/Cable_Carrier_Link_Brim_PLA_0.2.gcode
2021-02-03 16:28:35,007 - octoprint.plugins.detailedprogress - INFO - Printing started. Detailed progress started.
2021-02-03 16:28:35,011 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-02-03 16:29:34,928 - octoprint.util.comm - WARNING - Received an error from the printer's firmware: Heating failed, system stopped! Heater_ID: 0

| Last lines in terminal:
| Recv:  T:154.9 /190.0 B:47.0 /45.0 @:127 B@:0 W:?
| Recv:  T:155.6 /190.0 B:47.0 /45.0 @:127 B@:0 W:?
| Recv:  T:156.1 /190.0 B:47.0 /45.0 @:127 B@:0 W:?
| Recv:  T:156.8 /190.0 B:47.2 /45.0 @:127 B@:0 W:?
| Recv:  T:157.5 /190.0 B:47.0 /45.0 @:127 B@:0 W:?
| Recv:  T:158.2 /190.0 B:47.0 /45.0 @:127 B@:0 W:?
| Recv:  T:158.5 /190.0 B:47.0 /45.0 @:127 B@:0 W:?
| Recv:  T:158.8 /190.0 B:47.0 /45.0 @:127 B@:0 W:?
| Recv:  T:158.8 /190.0 B:46.9 /45.0 @:127 B@:0 W:?
| Recv:  T:158.7 /190.0 B:46.7 /45.0 @:127 B@:0 W:?
| Recv:  T:158.4 /190.0 B:46.7 /45.0 @:127 B@:0 W:?
| Recv:  T:158.0 /190.0 B:46.7 /45.0 @:127 B@:0 W:?
| Recv:  T:157.6 /190.0 B:46.5 /45.0 @:127 B@:0 W:?
| Recv:  T:157.1 /190.0 B:46.5 /45.0 @:127 B@:0 W:?
| Recv:  T:156.5 /190.0 B:46.5 /45.0 @:127 B@:0 W:?
| Recv:  T:155.9 /190.0 B:46.5 /45.0 @:127 B@:0 W:?
| Recv:  T:155.4 /190.0 B:46.2 /45.0 @:127 B@:0 W:?
| Recv:  T:154.7 /190.0 B:46.2 /45.0 @:127 B@:0 W:?
| Recv:  T:154.2 /190.0 B:46.2 /45.0 @:127 B@:0 W:?
| Recv: Error:Heating failed, system stopped! Heater_ID: 0
2021-02-03 16:29:34,933 - octoprint.filemanager.analysis - INFO - Starting analysis of local:Cable_Carrier_Link_Brim_PLA_0.2.gcode
2021-02-03 16:29:34,941 - octoprint.filemanager.analysis - INFO - Invoking analysis command: /home/pi/oprint/bin/python -m octoprint analysis gcode --speed-x=6000 --speed-y=6000 --max-t=10 --throttle=0.0 --throttle-lines=100 /home/pi/.octoprint/uploads/Cable_Carrier_Link_Brim_PLA_0.2.gcode
2021-02-03 16:30:16,422 - octoprint.filemanager.analysis - INFO - Analysis of entry local:Cable_Carrier_Link_Brim_PLA_0.2.gcode finished, needed 41.49s
2021-02-03 16:37:51,339 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-02-03 16:37:52,675 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-02-03 16:37:55,267 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-02-03 16:37:55,496 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin SkyNet3D-v2.3.1 (Github)"
2021-02-03 16:38:09,765 - octoprint.plugins.detailedprogress - INFO - Printing started. Detailed progress started.
2021-02-03 16:38:09,773 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-02-03 16:41:15,287 - octoprint.timelapse - ERROR - Could not capture image /home/pi/.octoprint/timelapse/tmp/Cable_Carrier_Link_Brim_PLA_0.2_20210203163809-0.jpg from http://octopi.local/webcam/?action=snapshot
Traceback (most recent call last):
  File "/home/pi/oprint/local/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/timelapse.py", line 560, in _perform_capture
    r.raise_for_status()
  File "/home/pi/oprint/local/lib/python2.7/site-packages/requests-2.7.0-py2.7.egg/requests/models.py", line 851, in raise_for_status
    raise HTTPError(http_error_msg, response=self)
HTTPError: 503 Server Error: Service Unavailable
2021-02-03 16:41:18,325 - octoprint.timelapse - ERROR - Could not capture image /home/pi/.octoprint/timelapse/tmp/Cable_Carrier_Link_Brim_PLA_0.2_20210203163809-1.jpg from http://octopi.local/webcam/?action=snapshot
Traceback (most recent call last):
  File "/home/pi/oprint/local/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/timelapse.py", line 560, in _perform_capture
    r.raise_for_status()
  File "/home/pi/oprint/local/lib/python2.7/site-packages/requests-2.7.0-py2.7.egg/requests/models.py", line 851, in raise_for_status
    raise HTTPError(http_error_msg, response=self)
HTTPError: 503 Server Error: Service Unavailable
2021-02-03 16:51:33,682 - octoprint.timelapse - ERROR - Could not capture image /home/pi/.octoprint/timelapse/tmp/Cable_Carrier_Link_Brim_PLA_0.2_20210203163809-0.jpg from http://octopi.local/webcam/?action=snapshot
Traceback (most recent call last):
  File "/home/pi/oprint/local/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/timelapse.py", line 560, in _perform_capture
    r.raise_for_status()
  File "/home/pi/oprint/local/lib/python2.7/site-packages/requests-2.7.0-py2.7.egg/requests/models.py", line 851, in raise_for_status
    raise HTTPError(http_error_msg, response=self)
HTTPError: 503 Server Error: Service Unavailable
2021-02-03 16:54:24,778 - octoprint.timelapse - ERROR - Could not capture image /home/pi/.octoprint/timelapse/tmp/Cable_Carrier_Link_Brim_PLA_0.2_20210203163809-0.jpg from http://octopi.local/webcam/?action=snapshot
Traceback (most recent call last):
  File "/home/pi/oprint/local/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/timelapse.py", line 560, in _perform_capture
    r.raise_for_status()
  File "/home/pi/oprint/local/lib/python2.7/site-packages/requests-2.7.0-py2.7.egg/requests/models.py", line 851, in raise_for_status
    raise HTTPError(http_error_msg, response=self)
HTTPError: 503 Server Error: Service Unavailable
2021-02-03 16:57:16,000 - octoprint.timelapse - ERROR - Could not capture image /home/pi/.octoprint/timelapse/tmp/Cable_Carrier_Link_Brim_PLA_0.2_20210203163809-0.jpg from http://octopi.local/webcam/?action=snapshot
Traceback (most recent call last):
  File "/home/pi/oprint/local/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/timelapse.py", line 560, in _perform_capture
    r.raise_for_status()
  File "/home/pi/oprint/local/lib/python2.7/site-packages/requests-2.7.0-py2.7.egg/requests/models.py", line 851, in raise_for_status
    raise HTTPError(http_error_msg, response=self)
HTTPError: 503 Server Error: Service Unavailable
2021-02-03 17:00:09,491 - octoprint.timelapse - ERROR - Could not capture image /home/pi/.octoprint/timelapse/tmp/Cable_Carrier_Link_Brim_PLA_0.2_20210203163809-0.jpg from http://octopi.local/webcam/?action=snapshot
Traceback (most recent call last):
  File "/home/pi/oprint/local/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/timelapse.py", line 560, in _perform_capture
    r.raise_for_status()
  File "/home/pi/oprint/local/lib/python2.7/site-packages/requests-2.7.0-py2.7.egg/requests/models.py", line 851, in raise_for_status
    raise HTTPError(http_error_msg, response=self)
HTTPError: 503 Server Error: Service Unavailable
2021-02-03 17:03:02,488 - octoprint.timelapse - ERROR - Could not capture image /home/pi/.octoprint/timelapse/tmp/Cable_Carrier_Link_Brim_PLA_0.2_20210203163809-0.jpg from http://octopi.local/webcam/?action=snapshot
Traceback (most recent call last):
  File "/home/pi/oprint/local/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/timelapse.py", line 560, in _perform_capture
    r.raise_for_status()
  File "/home/pi/oprint/local/lib/python2.7/site-packages/requests-2.7.0-py2.7.egg/requests/models.py", line 851, in raise_for_status
    raise HTTPError(http_error_msg, response=self)
HTTPError: 503 Server Error: Service Unavailable
2021-02-03 17:05:44,692 - octoprint.timelapse - ERROR - Could not capture image /home/pi/.octoprint/timelapse/tmp/Cable_Carrier_Link_Brim_PLA_0.2_20210203163809-0.jpg from http://octopi.local/webcam/?action=snapshot
Traceback (most recent call last):
  File "/home/pi/oprint/local/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/timelapse.py", line 560, in _perform_capture
    r.raise_for_status()
  File "/home/pi/oprint/local/lib/python2.7/site-packages/requests-2.7.0-py2.7.egg/requests/models.py", line 851, in raise_for_status
    raise HTTPError(http_error_msg, response=self)
HTTPError: 503 Server Error: Service Unavailable
2021-02-03 17:08:27,169 - octoprint.timelapse - ERROR - Could not capture image /home/pi/.octoprint/timelapse/tmp/Cable_Carrier_Link_Brim_PLA_0.2_20210203163809-0.jpg from http://octopi.local/webcam/?action=snapshot
Traceback (most recent call last):
  File "/home/pi/oprint/local/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/timelapse.py", line 560, in _perform_capture
    r.raise_for_status()
  File "/home/pi/oprint/local/lib/python2.7/site-packages/requests-2.7.0-py2.7.egg/requests/models.py", line 851, in raise_for_status
    raise HTTPError(http_error_msg, response=self)
HTTPError: 503 Server Error: Service Unavailable
2021-02-03 17:10:08,905 - octoprint.timelapse - ERROR - Could not capture image /home/pi/.octoprint/timelapse/tmp/Cable_Carrier_Link_Brim_PLA_0.2_20210203163809-0.jpg from http://octopi.local/webcam/?action=snapshot
Traceback (most recent call last):
  File "/home/pi/oprint/local/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/timelapse.py", line 560, in _perform_capture
    r.raise_for_status()
  File "/home/pi/oprint/local/lib/python2.7/site-packages/requests-2.7.0-py2.7.egg/requests/models.py", line 851, in raise_for_status
    raise HTTPError(http_error_msg, response=self)
HTTPError: 503 Server Error: Service Unavailable
2021-02-03 17:11:52,597 - octoprint.timelapse - ERROR - Could not capture image /home/pi/.octoprint/timelapse/tmp/Cable_Carrier_Link_Brim_PLA_0.2_20210203163809-0.jpg from http://octopi.local/webcam/?action=snapshot
Traceback (most recent call last):
  File "/home/pi/oprint/local/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/timelapse.py", line 560, in _perform_capture
    r.raise_for_status()
  File "/home/pi/oprint/local/lib/python2.7/site-packages/requests-2.7.0-py2.7.egg/requests/models.py", line 851, in raise_for_status
    raise HTTPError(http_error_msg, response=self)
HTTPError: 503 Server Error: Service Unavailable
2021-02-03 17:13:35,706 - octoprint.timelapse - ERROR - Could not capture image /home/pi/.octoprint/timelapse/tmp/Cable_Carrier_Link_Brim_PLA_0.2_20210203163809-0.jpg from http://octopi.local/webcam/?action=snapshot
Traceback (most recent call last):
  File "/home/pi/oprint/local/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/timelapse.py", line 560, in _perform_capture
    r.raise_for_status()
  File "/home/pi/oprint/local/lib/python2.7/site-packages/requests-2.7.0-py2.7.egg/requests/models.py", line 851, in raise_for_status
    raise HTTPError(http_error_msg, response=self)
HTTPError: 503 Server Error: Service Unavailable
2021-02-03 17:15:19,758 - octoprint.timelapse - ERROR - Could not capture image /home/pi/.octoprint/timelapse/tmp/Cable_Carrier_Link_Brim_PLA_0.2_20210203163809-0.jpg from http://octopi.local/webcam/?action=snapshot
Traceback (most recent call last):
  File "/home/pi/oprint/local/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/timelapse.py", line 560, in _perform_capture
    r.raise_for_status()
  File "/home/pi/oprint/local/lib/python2.7/site-packages/requests-2.7.0-py2.7.egg/requests/models.py", line 851, in raise_for_status
    raise HTTPError(http_error_msg, response=self)
HTTPError: 503 Server Error: Service Unavailable
2021-02-03 17:17:03,267 - octoprint.timelapse - ERROR - Could not capture image /home/pi/.octoprint/timelapse/tmp/Cable_Carrier_Link_Brim_PLA_0.2_20210203163809-0.jpg from http://octopi.local/webcam/?action=snapshot
Traceback (most recent call last):
  File "/home/pi/oprint/local/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/timelapse.py", line 560, in _perform_capture
    r.raise_for_status()
  File "/home/pi/oprint/local/lib/python2.7/site-packages/requests-2.7.0-py2.7.egg/requests/models.py", line 851, in raise_for_status
    raise HTTPError(http_error_msg, response=self)
HTTPError: 503 Server Error: Service Unavailable
2021-02-03 17:18:47,913 - octoprint.timelapse - ERROR - Could not capture image /home/pi/.octoprint/timelapse/tmp/Cable_Carrier_Link_Brim_PLA_0.2_20210203163809-0.jpg from http://octopi.local/webcam/?action=snapshot
Traceback (most recent call last):
  File "/home/pi/oprint/local/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/timelapse.py", line 560, in _perform_capture
    r.raise_for_status()
  File "/home/pi/oprint/local/lib/python2.7/site-packages/requests-2.7.0-py2.7.egg/requests/models.py", line 851, in raise_for_status
    raise HTTPError(http_error_msg, response=self)
HTTPError: 503 Server Error: Service Unavailable
2021-02-03 17:20:32,276 - octoprint.timelapse - ERROR - Could not capture image /home/pi/.octoprint/timelapse/tmp/Cable_Carrier_Link_Brim_PLA_0.2_20210203163809-0.jpg from http://octopi.local/webcam/?action=snapshot
Traceback (most recent call last):
  File "/home/pi/oprint/local/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/timelapse.py", line 560, in _perform_capture
    r.raise_for_status()
  File "/home/pi/oprint/local/lib/python2.7/site-packages/requests-2.7.0-py2.7.egg/requests/models.py", line 851, in raise_for_status
    raise HTTPError(http_error_msg, response=self)
HTTPError: 503 Server Error: Service Unavailable
2021-02-03 17:22:18,207 - octoprint.timelapse - ERROR - Could not capture image /home/pi/.octoprint/timelapse/tmp/Cable_Carrier_Link_Brim_PLA_0.2_20210203163809-0.jpg from http://octopi.local/webcam/?action=snapshot
Traceback (most recent call last):
  File "/home/pi/oprint/local/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/timelapse.py", line 560, in _perform_capture
    r.raise_for_status()
  File "/home/pi/oprint/local/lib/python2.7/site-packages/requests-2.7.0-py2.7.egg/requests/models.py", line 851, in raise_for_status
    raise HTTPError(http_error_msg, response=self)
HTTPError: 503 Server Error: Service Unavailable
2021-02-03 17:24:02,766 - octoprint.timelapse - ERROR - Could not capture image /home/pi/.octoprint/timelapse/tmp/Cable_Carrier_Link_Brim_PLA_0.2_20210203163809-0.jpg from http://octopi.local/webcam/?action=snapshot
Traceback (most recent call last):
  File "/home/pi/oprint/local/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/timelapse.py", line 560, in _perform_capture
    r.raise_for_status()
  File "/home/pi/oprint/local/lib/python2.7/site-packages/requests-2.7.0-py2.7.egg/requests/models.py", line 851, in raise_for_status
    raise HTTPError(http_error_msg, response=self)
HTTPError: 503 Server Error: Service Unavailable
2021-02-03 17:25:47,426 - octoprint.timelapse - ERROR - Could not capture image /home/pi/.octoprint/timelapse/tmp/Cable_Carrier_Link_Brim_PLA_0.2_20210203163809-0.jpg from http://octopi.local/webcam/?action=snapshot
Traceback (most recent call last):
  File "/home/pi/oprint/local/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/timelapse.py", line 560, in _perform_capture
    r.raise_for_status()
  File "/home/pi/oprint/local/lib/python2.7/site-packages/requests-2.7.0-py2.7.egg/requests/models.py", line 851, in raise_for_status
    raise HTTPError(http_error_msg, response=self)
HTTPError: 503 Server Error: Service Unavailable
2021-02-03 17:27:32,800 - octoprint.timelapse - ERROR - Could not capture image /home/pi/.octoprint/timelapse/tmp/Cable_Carrier_Link_Brim_PLA_0.2_20210203163809-0.jpg from http://octopi.local/webcam/?action=snapshot
Traceback (most recent call last):
  File "/home/pi/oprint/local/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/timelapse.py", line 560, in _perform_capture
    r.raise_for_status()
  File "/home/pi/oprint/local/lib/python2.7/site-packages/requests-2.7.0-py2.7.egg/requests/models.py", line 851, in raise_for_status
    raise HTTPError(http_error_msg, response=self)
HTTPError: 503 Server Error: Service Unavailable
2021-02-03 17:29:18,882 - octoprint.timelapse - ERROR - Could not capture image /home/pi/.octoprint/timelapse/tmp/Cable_Carrier_Link_Brim_PLA_0.2_20210203163809-0.jpg from http://octopi.local/webcam/?action=snapshot
Traceback (most recent call last):
  File "/home/pi/oprint/local/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/timelapse.py", line 560, in _perform_capture
    r.raise_for_status()
  File "/home/pi/oprint/local/lib/python2.7/site-packages/requests-2.7.0-py2.7.egg/requests/models.py", line 851, in raise_for_status
    raise HTTPError(http_error_msg, response=self)
HTTPError: 503 Server Error: Service Unavailable
2021-02-03 17:31:06,253 - octoprint.timelapse - ERROR - Could not capture image /home/pi/.octoprint/timelapse/tmp/Cable_Carrier_Link_Brim_PLA_0.2_20210203163809-0.jpg from http://octopi.local/webcam/?action=snapshot
Traceback (most recent call last):
  File "/home/pi/oprint/local/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/timelapse.py", line 560, in _perform_capture
    r.raise_for_status()
  File "/home/pi/oprint/local/lib/python2.7/site-packages/requests-2.7.0-py2.7.egg/requests/models.py", line 851, in raise_for_status
    raise HTTPError(http_error_msg, response=self)
HTTPError: 503 Server Error: Service Unavailable
2021-02-03 17:32:53,313 - octoprint.timelapse - ERROR - Could not capture image /home/pi/.octoprint/timelapse/tmp/Cable_Carrier_Link_Brim_PLA_0.2_20210203163809-0.jpg from http://octopi.local/webcam/?action=snapshot
Traceback (most recent call last):
  File "/home/pi/oprint/local/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/timelapse.py", line 560, in _perform_capture
    r.raise_for_status()
  File "/home/pi/oprint/local/lib/python2.7/site-packages/requests-2.7.0-py2.7.egg/requests/models.py", line 851, in raise_for_status
    raise HTTPError(http_error_msg, response=self)
HTTPError: 503 Server Error: Service Unavailable
2021-02-03 17:34:41,190 - octoprint.timelapse - ERROR - Could not capture image /home/pi/.octoprint/timelapse/tmp/Cable_Carrier_Link_Brim_PLA_0.2_20210203163809-0.jpg from http://octopi.local/webcam/?action=snapshot
Traceback (most recent call last):
  File "/home/pi/oprint/local/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/timelapse.py", line 560, in _perform_capture
    r.raise_for_status()
  File "/home/pi/oprint/local/lib/python2.7/site-packages/requests-2.7.0-py2.7.egg/requests/models.py", line 851, in raise_for_status
    raise HTTPError(http_error_msg, response=self)
HTTPError: 503 Server Error: Service Unavailable
2021-02-03 17:36:29,596 - octoprint.timelapse - ERROR - Could not capture image /home/pi/.octoprint/timelapse/tmp/Cable_Carrier_Link_Brim_PLA_0.2_20210203163809-0.jpg from http://octopi.local/webcam/?action=snapshot
Traceback (most recent call last):
  File "/home/pi/oprint/local/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/timelapse.py", line 560, in _perform_capture
    r.raise_for_status()
  File "/home/pi/oprint/local/lib/python2.7/site-packages/requests-2.7.0-py2.7.egg/requests/models.py", line 851, in raise_for_status
    raise HTTPError(http_error_msg, response=self)
HTTPError: 503 Server Error: Service Unavailable
2021-02-03 17:38:19,081 - octoprint.timelapse - ERROR - Could not capture image /home/pi/.octoprint/timelapse/tmp/Cable_Carrier_Link_Brim_PLA_0.2_20210203163809-0.jpg from http://octopi.local/webcam/?action=snapshot
Traceback (most recent call last):
  File "/home/pi/oprint/local/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/timelapse.py", line 560, in _perform_capture
    r.raise_for_status()
  File "/home/pi/oprint/local/lib/python2.7/site-packages/requests-2.7.0-py2.7.egg/requests/models.py", line 851, in raise_for_status
    raise HTTPError(http_error_msg, response=self)
HTTPError: 503 Server Error: Service Unavailable
2021-02-03 17:40:07,596 - octoprint.timelapse - ERROR - Could not capture image /home/pi/.octoprint/timelapse/tmp/Cable_Carrier_Link_Brim_PLA_0.2_20210203163809-0.jpg from http://octopi.local/webcam/?action=snapshot
Traceback (most recent call last):
  File "/home/pi/oprint/local/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/timelapse.py", line 560, in _perform_capture
    r.raise_for_status()
  File "/home/pi/oprint/local/lib/python2.7/site-packages/requests-2.7.0-py2.7.egg/requests/models.py", line 851, in raise_for_status
    raise HTTPError(http_error_msg, response=self)
HTTPError: 503 Server Error: Service Unavailable
2021-02-03 17:41:57,182 - octoprint.timelapse - ERROR - Could not capture image /home/pi/.octoprint/timelapse/tmp/Cable_Carrier_Link_Brim_PLA_0.2_20210203163809-0.jpg from http://octopi.local/webcam/?action=snapshot
Traceback (most recent call last):
  File "/home/pi/oprint/local/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/timelapse.py", line 560, in _perform_capture
    r.raise_for_status()
  File "/home/pi/oprint/local/lib/python2.7/site-packages/requests-2.7.0-py2.7.egg/requests/models.py", line 851, in raise_for_status
    raise HTTPError(http_error_msg, response=self)
HTTPError: 503 Server Error: Service Unavailable
2021-02-03 17:43:45,869 - octoprint.timelapse - ERROR - Could not capture image /home/pi/.octoprint/timelapse/tmp/Cable_Carrier_Link_Brim_PLA_0.2_20210203163809-0.jpg from http://octopi.local/webcam/?action=snapshot
Traceback (most recent call last):
  File "/home/pi/oprint/local/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/timelapse.py", line 560, in _perform_capture
    r.raise_for_status()
  File "/home/pi/oprint/local/lib/python2.7/site-packages/requests-2.7.0-py2.7.egg/requests/models.py", line 851, in raise_for_status
    raise HTTPError(http_error_msg, response=self)
HTTPError: 503 Server Error: Service Unavailable
2021-02-03 17:45:33,788 - octoprint.timelapse - ERROR - Could not capture image /home/pi/.octoprint/timelapse/tmp/Cable_Carrier_Link_Brim_PLA_0.2_20210203163809-0.jpg from http://octopi.local/webcam/?action=snapshot
Traceback (most recent call last):
  File "/home/pi/oprint/local/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/timelapse.py", line 560, in _perform_capture
    r.raise_for_status()
  File "/home/pi/oprint/local/lib/python2.7/site-packages/requests-2.7.0-py2.7.egg/requests/models.py", line 851, in raise_for_status
    raise HTTPError(http_error_msg, response=self)
HTTPError: 503 Server Error: Service Unavailable
2021-02-03 17:47:21,061 - octoprint.timelapse - ERROR - Could not capture image /home/pi/.octoprint/timelapse/tmp/Cable_Carrier_Link_Brim_PLA_0.2_20210203163809-0.jpg from http://octopi.local/webcam/?action=snapshot
Traceback (most recent call last):
  File "/home/pi/oprint/local/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/timelapse.py", line 560, in _perform_capture
    r.raise_for_status()
  File "/home/pi/oprint/local/lib/python2.7/site-packages/requests-2.7.0-py2.7.egg/requests/models.py", line 851, in raise_for_status
    raise HTTPError(http_error_msg, response=self)
HTTPError: 503 Server Error: Service Unavailable
2021-02-03 17:49:09,151 - octoprint.timelapse - ERROR - Could not capture image /home/pi/.octoprint/timelapse/tmp/Cable_Carrier_Link_Brim_PLA_0.2_20210203163809-0.jpg from http://octopi.local/webcam/?action=snapshot
Traceback (most recent call last):
  File "/home/pi/oprint/local/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/timelapse.py", line 560, in _perform_capture
    r.raise_for_status()
  File "/home/pi/oprint/local/lib/python2.7/site-packages/requests-2.7.0-py2.7.egg/requests/models.py", line 851, in raise_for_status
    raise HTTPError(http_error_msg, response=self)
HTTPError: 503 Server Error: Service Unavailable
2021-02-03 17:50:55,295 - octoprint.timelapse - ERROR - Could not capture image /home/pi/.octoprint/timelapse/tmp/Cable_Carrier_Link_Brim_PLA_0.2_20210203163809-0.jpg from http://octopi.local/webcam/?action=snapshot
Traceback (most recent call last):
  File "/home/pi/oprint/local/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/timelapse.py", line 560, in _perform_capture
    r.raise_for_status()
  File "/home/pi/oprint/local/lib/python2.7/site-packages/requests-2.7.0-py2.7.egg/requests/models.py", line 851, in raise_for_status
    raise HTTPError(http_error_msg, response=self)
HTTPError: 503 Server Error: Service Unavailable
2021-02-03 17:52:41,001 - octoprint.timelapse - ERROR - Could not capture image /home/pi/.octoprint/timelapse/tmp/Cable_Carrier_Link_Brim_PLA_0.2_20210203163809-0.jpg from http://octopi.local/webcam/?action=snapshot
Traceback (most recent call last):
  File "/home/pi/oprint/local/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/timelapse.py", line 560, in _perform_capture
    r.raise_for_status()
  File "/home/pi/oprint/local/lib/python2.7/site-packages/requests-2.7.0-py2.7.egg/requests/models.py", line 851, in raise_for_status
    raise HTTPError(http_error_msg, response=self)
HTTPError: 503 Server Error: Service Unavailable
2021-02-03 17:54:26,473 - octoprint.timelapse - ERROR - Could not capture image /home/pi/.octoprint/timelapse/tmp/Cable_Carrier_Link_Brim_PLA_0.2_20210203163809-0.jpg from http://octopi.local/webcam/?action=snapshot
Traceback (most recent call last):
  File "/home/pi/oprint/local/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/timelapse.py", line 560, in _perform_capture
    r.raise_for_status()
  File "/home/pi/oprint/local/lib/python2.7/site-packages/requests-2.7.0-py2.7.egg/requests/models.py", line 851, in raise_for_status
    raise HTTPError(http_error_msg, response=self)
HTTPError: 503 Server Error: Service Unavailable
2021-02-03 17:56:11,453 - octoprint.timelapse - ERROR - Could not capture image /home/pi/.octoprint/timelapse/tmp/Cable_Carrier_Link_Brim_PLA_0.2_20210203163809-0.jpg from http://octopi.local/webcam/?action=snapshot
Traceback (most recent call last):
  File "/home/pi/oprint/local/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/timelapse.py", line 560, in _perform_capture
    r.raise_for_status()
  File "/home/pi/oprint/local/lib/python2.7/site-packages/requests-2.7.0-py2.7.egg/requests/models.py", line 851, in raise_for_status
    raise HTTPError(http_error_msg, response=self)
HTTPError: 503 Server Error: Service Unavailable
2021-02-03 17:57:55,430 - octoprint.timelapse - ERROR - Could not capture image /home/pi/.octoprint/timelapse/tmp/Cable_Carrier_Link_Brim_PLA_0.2_20210203163809-0.jpg from http://octopi.local/webcam/?action=snapshot
Traceback (most recent call last):
  File "/home/pi/oprint/local/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/timelapse.py", line 560, in _perform_capture
    r.raise_for_status()
  File "/home/pi/oprint/local/lib/python2.7/site-packages/requests-2.7.0-py2.7.egg/requests/models.py", line 851, in raise_for_status
    raise HTTPError(http_error_msg, response=self)
HTTPError: 503 Server Error: Service Unavailable
2021-02-03 17:59:39,693 - octoprint.timelapse - ERROR - Could not capture image /home/pi/.octoprint/timelapse/tmp/Cable_Carrier_Link_Brim_PLA_0.2_20210203163809-0.jpg from http://octopi.local/webcam/?action=snapshot
Traceback (most recent call last):
  File "/home/pi/oprint/local/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/timelapse.py", line 560, in _perform_capture
    r.raise_for_status()
  File "/home/pi/oprint/local/lib/python2.7/site-packages/requests-2.7.0-py2.7.egg/requests/models.py", line 851, in raise_for_status
    raise HTTPError(http_error_msg, response=self)
HTTPError: 503 Server Error: Service Unavailable
2021-02-03 18:01:22,543 - octoprint.timelapse - ERROR - Could not capture image /home/pi/.octoprint/timelapse/tmp/Cable_Carrier_Link_Brim_PLA_0.2_20210203163809-0.jpg from http://octopi.local/webcam/?action=snapshot
Traceback (most recent call last):
  File "/home/pi/oprint/local/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/timelapse.py", line 560, in _perform_capture
    r.raise_for_status()
  File "/home/pi/oprint/local/lib/python2.7/site-packages/requests-2.7.0-py2.7.egg/requests/models.py", line 851, in raise_for_status
    raise HTTPError(http_error_msg, response=self)
HTTPError: 503 Server Error: Service Unavailable
2021-02-03 18:02:58,850 - octoprint.timelapse - ERROR - Could not capture image /home/pi/.octoprint/timelapse/tmp/Cable_Carrier_Link_Brim_PLA_0.2_20210203163809-0.jpg from http://octopi.local/webcam/?action=snapshot
Traceback (most recent call last):
  File "/home/pi/oprint/local/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/timelapse.py", line 560, in _perform_capture
    r.raise_for_status()
  File "/home/pi/oprint/local/lib/python2.7/site-packages/requests-2.7.0-py2.7.egg/requests/models.py", line 851, in raise_for_status
    raise HTTPError(http_error_msg, response=self)
HTTPError: 503 Server Error: Service Unavailable
2021-02-03 18:03:30,251 - octoprint.util.comm - WARNING - Received an error from the printer's firmware: Thermal Runaway, system stopped! Heater_ID: 0

| Last lines in terminal:
| Send: N82670 G0 F9000 X79.87 Y111.295*66
| Recv: ok
| Send: N82671 G0 X78.785 Y111.295*24
| Recv: ok
| Send: N82672 G0 X69.215 Y111.295*23
| Recv: ok
| Send: N82673 G0 X68.13 Y111.295*35
| Recv: ok
| Send: N82674 G0 X67.869 Y111.295*30
| Recv: ok
| Send: N82675 G1 F1500 E3084.84517*63
| Recv: echo: cold extrusion prevented
| Recv: echo: cold extrusion prevented
| Recv: ok
| Send: N82676 G1 F6000 X67.812 Y111.507 E3084.85247*5
| Recv: echo: cold extrusion prevented
| Recv: echo: cold extrusion prevented
| Recv: ok
| Send: N82677 G0 F9000 X67.868 Y111.213*125
| Recv: Error:Thermal Runaway, system stopped! Heater_ID: 0
2021-02-03 18:05:45,376 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-02-03 18:05:45,465 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-02-03 18:06:26,558 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-02-03 18:06:27,874 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-02-03 18:06:30,470 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-02-03 18:06:30,749 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin SkyNet3D-v2.3.1 (Github)"
2021-02-03 18:07:29,203 - octoprint.util.comm - WARNING - Received an error from the printer's firmware: Heating failed, system stopped! Heater_ID: 0

| Last lines in terminal:
| Recv: ok T:69.8 /190.0 B:39.3 /45.0 @:127 B@:0
| Send: M105
| Recv: ok T:69.5 /190.0 B:39.3 /45.0 @:127 B@:127
| Send: M105
| Recv: ok T:69.2 /190.0 B:39.3 /45.0 @:127 B@:127
| Send: M105
| Recv: ok T:68.9 /190.0 B:39.3 /45.0 @:127 B@:127
| Send: M105
| Recv: ok T:68.5 /190.0 B:39.3 /45.0 @:127 B@:127
| Send: M18
| Recv: ok
| Send: M105
| Recv: ok T:68.2 /190.0 B:39.2 /45.0 @:127 B@:127
| Send: M105
| Recv: ok T:67.9 /190.0 B:39.1 /45.0 @:127 B@:127
| Send: M105
| Recv: ok T:67.6 /190.0 B:39.0 /45.0 @:127 B@:127
| Send: M105
| Recv: ok T:67.3 /190.0 B:39.0 /45.0 @:127 B@:127
| Recv: Error:Heating failed, system stopped! Heater_ID: 0
2021-02-03 18:08:56,592 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-02-03 18:08:57,296 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-02-03 18:09:27,901 - octoprint.plugins.announcements - INFO - Loaded channel _important from http://octoprint.org/feeds/important.xml in 3.6s
2021-02-03 18:09:29,173 - octoprint.plugins.announcements - INFO - Loaded channel _blog from http://octoprint.org/feeds/octoblog.xml in 0.42s
2021-02-03 18:09:29,744 - octoprint.plugins.announcements - INFO - Loaded channel _m33fio from https://exploitkings.com/scripts/M33 Fio.xml in 0.4s
2021-02-03 18:09:48,944 - octoprint.plugins.softwareupdate - INFO - Starting update of octoprint to 1.5.3...
2021-02-03 18:10:51,316 - octoprint.plugins.softwareupdate.updaters.update_script - ERROR - Target: octoprint, error while executing update script, got returncode 1
Traceback (most recent call last):
  File "/home/pi/oprint/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/plugins/softwareupdate/updaters/update_script.py", line 91, in perform_update
    caller.checked_call(update_command, cwd=folder)
  File "/home/pi/oprint/local/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/util/commandline.py", line 69, in checked_call
    raise CommandlineError(returncode, stdout, stderr)
CommandlineError
2021-02-03 18:10:51,323 - octoprint.plugins.softwareupdate - ERROR - Update of octoprint can not be performed
Traceback (most recent call last):
  File "/home/pi/oprint/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/plugins/softwareupdate/__init__.py", line 893, in _perform_update
    update_result = updater.perform_update(target, populated_check, target_version, log_cb=self._log, online=online)
  File "/home/pi/oprint/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/plugins/softwareupdate/updaters/update_script.py", line 94, in perform_update
    raise UpdateError("Error while executing update script for %s", (e.stdout, e.stderr))
UpdateError
2021-02-03 18:10:51,968 - octoprint.plugins.softwareupdate - INFO - Starting update of customcontrol to 0.2.2...
2021-02-03 18:11:28,082 - octoprint.plugins.softwareupdate - INFO - Update of customcontrol to 0.2.2 successful!
2021-02-03 18:11:29,293 - octoprint.plugins.softwareupdate - INFO - Starting update of enclosure to 4.12...
2021-02-03 18:12:02,218 - octoprint.plugins.softwareupdate - INFO - Update of enclosure to 4.12 successful!
2021-02-03 18:12:03,141 - octoprint.plugins.softwareupdate - INFO - Starting update of filemanager to 0.1.5...
2021-02-03 18:12:34,973 - octoprint.plugins.softwareupdate - INFO - Update of filemanager to 0.1.5 successful!
2021-02-03 18:12:36,676 - octoprint.plugins.softwareupdate - INFO - Starting update of multi_colors to 1.0.17...
2021-02-03 18:13:08,146 - octoprint.plugins.softwareupdate - INFO - Update of multi_colors to 1.0.17 successful!
2021-02-03 18:13:08,931 - octoprint.plugins.softwareupdate - INFO - Starting update of portlister to 0.1.10...
2021-02-03 18:13:40,522 - octoprint.plugins.softwareupdate - INFO - Update of portlister to 0.1.10 successful!
2021-02-03 18:13:41,821 - octoprint.plugins.softwareupdate - INFO - Starting update of psucontrol to 0.1.11...
2021-02-03 18:14:14,968 - octoprint.plugins.softwareupdate - INFO - Update of psucontrol to 0.1.11 successful!
2021-02-03 18:14:16,310 - octoprint.plugins.softwareupdate - INFO - Starting update of stats to 2.0.2...
2021-02-03 18:15:29,495 - octoprint.plugins.softwareupdate - ERROR - Update of stats can not be performed
Traceback (most recent call last):
  File "/home/pi/oprint/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/plugins/softwareupdate/__init__.py", line 893, in _perform_update
    update_result = updater.perform_update(target, populated_check, target_version, log_cb=self._log, online=online)
  File "/home/pi/oprint/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/plugins/softwareupdate/updaters/pip.py", line 79, in perform_update
    raise exceptions.UpdateError("Error while executing pip install", (stdout, stderr))
UpdateError
2021-02-03 18:15:30,005 - octoprint.plugins.softwareupdate - INFO - Starting update of systemcommandeditor to 1.2.1...
2021-02-03 18:16:07,370 - octoprint.plugins.softwareupdate - INFO - Update of systemcommandeditor to 1.2.1 successful!
2021-02-03 18:17:10,797 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-02-03 18:17:12,224 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-02-03 18:17:14,823 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-02-03 18:17:14,887 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin SkyNet3D-v2.3.1 (Github)"
2021-02-03 18:18:02,091 - octoprint.util.comm - WARNING - Received an error from the printer's firmware: Heating failed, system stopped! Heater_ID: 0

| Last lines in terminal:
| Recv: ok
| Send: M105
| Recv: ok T:32.1 /190.0 B:32.4 /45.0 @:127 B@:0
| Send: M105
| Recv: ok T:32.1 /190.0 B:32.4 /45.0 @:127 B@:0
| Send: M105
| Recv: ok T:32.1 /190.0 B:32.4 /45.0 @:127 B@:127
| Send: M105
| Recv: ok T:32.1 /190.0 B:32.4 /45.0 @:127 B@:127
| Send: M105
| Recv: ok T:32.1 /190.0 B:32.4 /45.0 @:127 B@:127
| Send: M105
| Recv: ok T:32.1 /190.0 B:32.4 /45.0 @:127 B@:127
| Send: M105
| Recv: ok T:32.0 /190.0 B:32.4 /45.0 @:127 B@:127
| Send: M105
| Recv: ok T:31.9 /190.0 B:32.4 /45.0 @:127 B@:127
| Send: M105
| Recv: ok T:31.8 /190.0 B:32.4 /45.0 @:127 B@:127
| Recv: Error:Heating failed, system stopped! Heater_ID: 0
2021-02-03 18:24:03,388 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-02-03 18:24:04,834 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-02-03 18:24:11,537 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-02-03 18:24:11,585 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin SkyNet3D-v2.3.1 (Github)"
2021-02-03 18:24:42,771 - octoprint.util.comm - WARNING - Received an error from the printer's firmware: Heating failed, system stopped! Heater_ID: 0

| Last lines in terminal:
| Recv: ok
| Send: M105
| Recv: ok T:29.0 /190.0 B:30.7 /45.0 @:127 B@:0
| Send: M105
| Recv: ok T:29.0 /190.0 B:30.7 /45.0 @:127 B@:127
| Send: M105
| Recv: ok T:29.0 /190.0 B:30.7 /45.0 @:127 B@:127
| Send: M105
| Recv: ok T:29.0 /190.0 B:30.7 /45.0 @:127 B@:127
| Send: M105
| Recv: ok T:29.0 /190.0 B:30.7 /45.0 @:127 B@:127
| Send: M105
| Recv: ok T:29.0 /190.0 B:30.7 /45.0 @:127 B@:127
| Send: M105
| Recv: ok T:29.0 /190.0 B:30.7 /45.0 @:127 B@:127
| Send: M105
| Recv: ok T:29.0 /190.0 B:30.7 /45.0 @:127 B@:127
| Send: M105
| Recv: ok T:29.0 /190.0 B:30.7 /45.0 @:127 B@:127
| Recv: Error:Heating failed, system stopped! Heater_ID: 0
2021-02-03 18:25:44,547 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-02-03 18:25:45,968 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-02-03 18:25:52,654 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-02-03 18:25:52,734 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin SkyNet3D-v2.3.1 (Github)"
2021-02-03 18:26:49,595 - octoprint.util.comm - WARNING - Received an error from the printer's firmware: Heating failed, system stopped! Heater_ID: 0

| Last lines in terminal:
| Recv: ok T:28.5 /0.0 B:30.3 /0.0 @:0 B@:0
| Send: M104 S190
| Recv: ok
| Send: M105
| Recv: ok T:28.5 /190.0 B:30.3 /0.0 @:127 B@:0
| Send: M105
| Recv: ok T:28.5 /190.0 B:30.3 /0.0 @:127 B@:0
| Send: M105
| Recv: ok T:28.5 /190.0 B:30.3 /0.0 @:127 B@:0
| Send: M105
| Recv: ok T:28.5 /190.0 B:30.3 /0.0 @:127 B@:0
| Send: M105
| Recv: ok T:28.5 /190.0 B:30.3 /0.0 @:127 B@:0
| Send: M105
| Recv: ok T:28.5 /190.0 B:30.3 /0.0 @:127 B@:0
| Send: M105
| Recv: ok T:28.5 /190.0 B:30.3 /0.0 @:127 B@:0
| Send: M105
| Recv: ok T:28.5 /190.0 B:30.3 /0.0 @:127 B@:0
| Recv: Error:Heating failed, system stopped! Heater_ID: 0
2021-02-03 18:27:24,340 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-02-03 18:27:24,847 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-02-03 18:17:11,265 - octoprint.server - INFO - ******************************************************************************
2021-02-03 18:17:11,267 - octoprint.server - INFO - Starting OctoPrint 1.3.5 (master branch)
2021-02-03 18:17:11,268 - octoprint.server - INFO - ******************************************************************************
2021-02-03 18:17:11,481 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages...
2021-02-03 18:17:15,766 - octoprint.plugin.core - INFO - Found 23 plugin(s) providing 22 mixin implementations, 24 hook handlers
2021-02-03 18:17:15,851 - octoprint.server - INFO - Intermediary server started
2021-02-03 18:17:15,852 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages...
2021-02-03 18:17:16,368 - octoprint.plugin.core - INFO - Found 23 plugin(s) providing 22 mixin implementations, 24 hook handlers
2021-02-03 18:17:16,436 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/pi/.octoprint/uploads...
2021-02-03 18:17:17,146 - octoprint.filemanager.storage - INFO - ... file metadata for /home/pi/.octoprint/uploads initialized successfully.
2021-02-03 18:17:17,178 - octoprint.util.connectivity_checker - INFO - Connectivity changed from offline to online
2021-02-03 18:17:17,736 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk
2021-02-03 18:17:17,744 - octoprint.plugins.multi_colors - INFO - MultiColors init
2021-02-03 18:33:01,081 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip
2021-02-03 18:33:05,706 - octoprint.util.pip - INFO - Version of pip is 9.0.1
2021-02-03 18:33:05,709 - octoprint.plugin.core - INFO - Initialized 22 plugin implementation(s)
2021-02-03 18:33:05,723 - py.warnings - WARNING - /home/pi/oprint/local/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/util/__init__.py:594: UnicodeWarning: Unicode unequal comparison failed to convert both arguments to Unicode - interpreting them as being unequal
  if value_source != value_target:

2021-02-03 18:33:05,731 - octoprint.plugins.enclosure - WARNING - ######### current settings version None target settings version 6 #########
2021-02-03 18:33:05,732 - octoprint.plugins.enclosure - INFO - #########        Current settings        #########
2021-02-03 18:33:05,733 - octoprint.plugins.enclosure - INFO - rpi_outputs: []
2021-02-03 18:33:05,735 - octoprint.plugins.enclosure - INFO - rpi_inputs: []
2021-02-03 18:33:05,735 - octoprint.plugins.enclosure - INFO - #########        End Current Settings        #########
2021-02-03 18:33:05,736 - octoprint.plugins.enclosure - WARNING - ######### settings not compatible #########
2021-02-03 18:33:06,261 - octoprint.plugins.psucontrol - INFO - Using GPIO for On/Off
2021-02-03 18:33:06,262 - octoprint.plugins.psucontrol - INFO - Using internal tracking for PSU on/off state.
2021-02-03 18:33:06,263 - octoprint.plugins.psucontrol - INFO - Running RPi.GPIO version 0.6.3
2021-02-03 18:33:06,264 - octoprint.plugins.psucontrol - INFO - Using GPIO for On/Off
2021-02-03 18:33:06,264 - octoprint.plugins.psucontrol - INFO - Configuring GPIO for pin 5
2021-02-03 18:33:06,276 - octoprint.plugin.core - INFO - 23 plugin(s) registered with the system:
|  Announcement Plugin (bundled) = /home/pi/oprint/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/plugins/announcements
|  Core Wizard (bundled) = /home/pi/oprint/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/plugins/corewizard
|  Cost Plugin (0.1.3) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_cost
|  CuraEngine (<= 15.04) (bundled) = /home/pi/oprint/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/plugins/cura
|  Custom Control Editor (0.2.2) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_customControl
|  Detailed Progress Plugin (0.1.4) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_detailedprogress
|  Discovery (bundled) = /home/pi/oprint/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/plugins/discovery
|  EEPROM Marlin Editor Plugin (1.2.1) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_eeprom_marlin
|  Enclosure Plugin (4.12) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_enclosure
|  FileManager (0.1.5) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_filemanager
|  M33 Fio (1.21) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_m33fio
|  Multi Colors (1.0.17) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_multi_colors
|  Plugin Manager (bundled) = /home/pi/oprint/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/plugins/pluginmanager
|  PortLister (0.1.10) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_portlister
|  Print History Plugin (1.2) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_printhistory
|  Printer Stats (1.0.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_stats
|  PSU Control (0.1.11) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_psucontrol
|  SnapStream (0.2.3) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_snapstream
|  Software Update (bundled) = /home/pi/oprint/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/plugins/softwareupdate
|  STL Viewer (0.3.1) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_stlviewer
| !TouchUI (0.3.6) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_touchui
|  Virtual Printer (bundled) = /home/pi/oprint/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/plugins/virtual_printer
|  Yamlpatcher (0.1.1) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_yamlpatcher
2021-02-03 18:33:06,293 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/webassets...
2021-02-03 18:33:06,334 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-cache...
2021-02-03 18:33:06,782 - octoprint.server - INFO - Shutting down intermediary server...
2021-02-03 18:33:06,825 - octoprint.server - INFO - Intermediary server shut down
2021-02-03 18:33:06,828 - octoprint.events - INFO - Processing startup event, this is our first event
2021-02-03 18:33:06,876 - octoprint.events - INFO - Adding 1 events to queue that were held back before startup event
2021-02-03 18:33:06,906 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue...
2021-02-03 18:33:06,973 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue
2021-02-03 18:33:07,975 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance "Sven's octoprint" for _http._tcp
2021-02-03 18:33:08,016 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance "Sven's octoprint" for _octoprint._tcp
2021-02-03 18:33:08,051 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance "Sven's octoprint" for SSDP
2021-02-03 18:33:08,073 - octoprint.server - INFO - Listening on http://127.0.0.1:5000
2021-02-03 18:33:08,219 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from http://plugins.octoprint.org/plugins.json
2021-02-03 18:33:08,228 - octoprint.plugins.enclosure - INFO - GPIO mode was configured before, GPIO mode will be forced to use: BOARD as pin numbers. Please update GPIO accordingly!
2021-02-03 18:33:09,103 - octoprint.server.util.sockjs - INFO - New connection from client: 192.168.0.163
2021-02-03 18:33:11,804 - tornado.access - WARNING - 404 GET /plugin/enclosure/getUpdateBtnStatus (127.0.0.1) 121.46ms
2021-02-03 18:33:13,569 - octoprint.plugins.portlister - INFO - Port Lister () {}
2021-02-03 18:33:13,819 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid
2021-02-03 18:33:14,158 - octoprint.plugins.stats - INFO - Printer Stats
2021-02-03 18:33:14,433 - octoprint.plugins.pluginmanager - ERROR - Something is wrong with this compatibility string for OctoPrint: >=1.3.4+
Traceback (most recent call last):
  File "/home/pi/oprint/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/plugins/pluginmanager/__init__.py", line 850, in _is_octoprint_compatible
    s = next(pkg_resources.parse_requirements("OctoPrint" + octo_compat))
  File "/home/pi/oprint/local/lib/python2.7/site-packages/pkg_resources.py", line 2721, in parse_requirements
    "version spec")
  File "/home/pi/oprint/local/lib/python2.7/site-packages/pkg_resources.py", line 2697, in scan_list
    raise ValueError(msg, line, "at", line[p:])
ValueError: ("Expected ',' or end-of-list in", 'OctoPrint>=1.3.4+', 'at', '+')
2021-02-03 18:33:14,764 - octoprint.plugins.pluginmanager - ERROR - Something is wrong with this compatibility string for OctoPrint: >=1.3.4+
Traceback (most recent call last):
  File "/home/pi/oprint/lib/python2.7/site-packages/OctoPrint-1.3.5-py2.7.egg/octoprint/plugins/pluginmanager/__init__.py", line 850, in _is_octoprint_compatible
    s = next(pkg_resources.parse_requirements("OctoPrint" + octo_compat))
  File "/home/pi/oprint/local/lib/python2.7/site-packages/pkg_resources.py", line 2721, in parse_requirements
    "version spec")
  File "/home/pi/oprint/local/lib/python2.7/site-packages/pkg_resources.py", line 2697, in scan_list
    raise ValueError(msg, line, "at", line[p:])
ValueError: ("Expected ',' or end-of-list in", 'OctoPrint>=1.3.4+', 'at', '+')
2021-02-03 18:33:15,153 - octoprint.plugins.stlviewer - INFO - STL Viewer loaded!
2021-02-03 18:33:15,487 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip
2021-02-03 18:33:15,489 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'query_string': 'l10n=en', 'path': '/', 'base_url': 'http://d54c0ecf7.access.telenet.be/'}
2021-02-03 18:33:15,993 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip
2021-02-03 18:33:16,060 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip
2021-02-03 18:33:16,154 - octoprint.plugins.pluginmanager - INFO - Loaded plugin notices data from http://plugins.octoprint.org/notices.json
2021-02-03 18:33:16,222 - octoprint.plugins.pluginmanager - INFO - Loaded plugin notices data from http://plugins.octoprint.org/notices.json
2021-02-03 18:33:16,656 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip
2021-02-03 18:33:17,015 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python -m pip" as command to invoke pip
2021-02-03 18:33:25,150 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python2.7/site-packages/, --user flag needed => no, virtual env => yes
2021-02-03 18:33:28,198 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk
2021-02-03 18:33:45,216 - octoprint.server.preemptive_cache - INFO - ... done in 29.73s
2021-02-03 18:33:45,218 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'query_string': 'l10n=en', 'path': '/', 'base_url': 'http://192.168.0.201/'}
2021-02-03 18:33:58,078 - octoprint.server.preemptive_cache - INFO - ... done in 12.86s
2021-02-03 18:33:58,081 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'query_string': 'l10n=en', 'path': '/', 'base_url': 'http://84.192.236.247:80/'}
2021-02-03 18:34:10,803 - tornado.access - WARNING - 404 GET /static/img/progressbar.gif (127.0.0.1) 112.51ms
2021-02-03 18:34:10,847 - tornado.access - WARNING - 404 GET /static/img/loading.gif (127.0.0.1) 14.21ms
2021-02-03 18:34:10,925 - tornado.access - WARNING - 404 GET /img/tentacle-20x20.png (127.0.0.1) 21.17ms
2021-02-03 18:34:10,949 - tornado.access - WARNING - 404 GET /img/graph-background.png (127.0.0.1) 18.45ms
2021-02-03 18:34:10,972 - tornado.access - WARNING - 404 GET /img/icon-sd-black-14.png (127.0.0.1) 17.85ms
2021-02-03 18:34:14,713 - octoprint.server.util.sockjs - INFO - Client connection closed: 192.168.0.163
2021-02-03 18:34:14,784 - octoprint.server.preemptive_cache - INFO - ... done in 16.70s
2021-02-03 18:34:14,786 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'query_string': 'l10n=en', 'path': '/', 'base_url': 'http://84.192.236.247/'}
2021-02-03 18:34:15,985 - octoprint.server.util.sockjs - INFO - New connection from client: 192.168.0.163
2021-02-03 18:34:26,293 - octoprint.plugins.multi_colors - INFO - on_api_command called: 'settings' / '{u'command': u'settings'}'
2021-02-03 18:34:26,983 - tornado.access - WARNING - 409 POST /api/printer/command (127.0.0.1) 741.06ms
2021-02-03 18:34:27,190 - tornado.access - WARNING - 409 POST /api/printer/command (127.0.0.1) 941.94ms
2021-02-03 18:34:27,300 - octoprint.server.preemptive_cache - INFO - ... done in 12.51s
2021-02-03 18:34:27,301 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'query_string': 'l10n=en', 'path': '/', 'base_url': 'http://127.0.0.1/'}
2021-02-03 18:34:36,876 - octoprint.server.preemptive_cache - INFO - ... done in 9.57s
2021-02-03 18:34:51,074 - octoprint.plugins.psucontrol - INFO - Switching PSU On
2021-02-03 18:34:52,289 - octoprint.plugins.portlister - INFO - on_port_created connection_options {'portPreference': 'AUTO', 'autoconnect': True, 'baudrates': [115200, 250000, 230400, 57600, 38400, 19200, 9600], 'ports': ['/dev/ttyUSB0'], 'baudratePreference': 115200}
2021-02-03 18:34:52,292 - octoprint.plugins.portlister - INFO - Checking if /dev/ttyUSB0 is in ['/dev/ttyUSB0']
2021-02-03 18:34:52,296 - octoprint.plugins.portlister - INFO - autoconnect_delay 20
2021-02-03 18:35:12,299 - octoprint.plugins.portlister - INFO - do_auto_connect
2021-02-03 18:35:12,302 - octoprint.plugins.portlister - INFO - realpath match
2021-02-03 18:35:12,366 - octoprint.plugins.portlister - INFO - Attempting to connect to AUTO at 115200 with profile '_default'
2021-02-03 18:35:12,501 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-02-03 18:35:13,968 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-02-03 18:35:16,566 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-02-03 18:35:16,825 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin SkyNet3D-v2.3.1 (Github)"
2021-02-03 18:36:05,206 - octoprint.util.comm - WARNING - Received an error from the printer's firmware: Heating failed, system stopped! Heater_ID: 0

| Last lines in terminal:
| Recv: ok T:25.0 /190.0 B:28.0 /0.0 @:127 B@:0
| Send: M105
| Recv: ok T:25.0 /190.0 B:28.0 /0.0 @:127 B@:0
| Send: M105
| Recv: ok T:25.0 /190.0 B:28.0 /0.0 @:127 B@:0
| Send: M105
| Recv: ok T:25.0 /190.0 B:28.0 /0.0 @:127 B@:0
| Send: M105
| Recv: ok T:25.0 /190.0 B:28.0 /0.0 @:127 B@:0
| Send: M105
| Recv: ok T:25.0 /190.0 B:28.0 /0.0 @:127 B@:0
| Send: M105
| Recv: ok T:25.0 /190.0 B:28.0 /0.0 @:127 B@:0
| Send: M105
| Recv: ok T:25.0 /190.0 B:28.0 /0.0 @:127 B@:0
| Send: M105
| Recv: ok T:25.0 /190.0 B:28.0 /0.0 @:127 B@:0
| Send: M105
| Recv: ok T:25.0 /190.0 B:28.0 /0.0 @:127 B@:0
| Recv: Error:Heating failed, system stopped! Heater_ID: 0
2021-02-03 18:36:05,730 - tornado.access - WARNING - 409 POST /api/printer/command (127.0.0.1) 213.57ms
2021-02-03 18:36:05,783 - tornado.access - WARNING - 409 POST /api/printer/command (127.0.0.1) 260.46ms
2021-02-03 18:36:05,808 - tornado.access - WARNING - 409 POST /api/printer/tool (127.0.0.1) 103.67ms
2021-02-03 18:39:05,196 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0
2021-02-03 18:39:05,580 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0