2022-01-12 10:27:08,045 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2022-01-12 10:27:08,053 - octoprint.server - INFO - --- Log roll over detected --------------------------------------------------- 2022-01-12 10:27:08,054 - octoprint.server - INFO - OctoPrint 1.7.2 2022-01-12 10:27:08,057 - octoprint.plugin.core - INFO - 18 plugin(s) registered with the system: | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/appkeys | Backup & Restore (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/backup | Core Wizard (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/corewizard | Discovery (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/discovery | Error Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/errortracking | Event Manager (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/eventmanager | File Check (2021.2.23) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_file_check | Firmware Check (2021.10.11) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_firmware_check | GCode Viewer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/gcodeviewer | Logging (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/logging | Pi Support Plugin (2021.10.28) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/pluginmanager | Software Update (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/softwareupdate | Virtual Printer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2022-01-12 10:27:08,116 - octoprint.environment - INFO - Detected environment is Python 3.7.3 under Linux (linux). Details: | hardware: | cores: 4 | freq: 1200.0 | ram: 915722240 | os: | bits: 32 | id: linux | platform: linux | plugins: | pi_support: | model: Raspberry Pi 3 Model B Rev 1.2 | octopi_version: 0.18.0 | throttle_state: '0x0' | python: | pip: 20.3.3 | version: 3.7.3 | virtualenv: /home/pi/oprint 2022-01-12 10:27:08,117 - octoprint.server - INFO - ------------------------------------------------------------------------------ 2022-01-12 10:27:55,997 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json 2022-01-12 10:27:57,323 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip 2022-01-12 10:27:57,326 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-01-12 10:27:57,329 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-01-12 10:27:57,649 - octoprint.server.util.flask.PreemptiveCache - INFO - Adding entry for / and {'path': '/', 'base_url': 'http://192.168.178.31/', 'query_string': 'l10n=de', '_timestamp': 1641983277.6492186, '_count': 1} 2022-01-12 10:28:14,629 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.178.27 2022-01-12 10:28:55,567 - octoprint.access.users - INFO - Logged in user: Feuer-Fritz 2022-01-12 10:28:55,569 - octoprint.server.api - INFO - Actively logging in user Feuer-Fritz from ::ffff:192.168.178.27 2022-01-12 10:28:56,606 - octoprint.plugins.announcements - INFO - Loaded channel _important from https://octoprint.org/feeds/important.xml in 0.16s 2022-01-12 10:28:56,854 - octoprint.plugins.announcements - INFO - Loaded channel _releases from https://octoprint.org/feeds/releases.xml in 0.15s 2022-01-12 10:28:57,057 - octoprint.plugins.announcements - INFO - Loaded channel _blog from https://octoprint.org/feeds/octoblog.xml in 0.16s 2022-01-12 10:28:57,251 - octoprint.plugins.announcements - INFO - Loaded channel _plugins from https://plugins.octoprint.org/feed.xml in 0.15s 2022-01-12 10:28:57,476 - octoprint.plugins.announcements - INFO - Loaded channel _octopi from https://octoprint.org/feeds/octopi.xml in 0.15s 2022-01-12 10:28:58,282 - octoprint.plugins.pluginmanager - INFO - Loaded plugin notices data from https://plugins.octoprint.org/notices.json 2022-01-12 10:28:58,655 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk 2022-01-12 10:28:58,723 - octoprint.server.util.sockjs - INFO - User Feuer-Fritz logged in on the socket from client ::ffff:192.168.178.27 2022-01-12 10:29:47,709 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 182, 'printer_state': 'OFFLINE'} 2022-01-12 10:29:47,952 - octoprint.plugins.tracking - INFO - Sent tracking event pong, payload: {'version': '1.7.2', 'os': 'linux', 'bits': 32, 'python': '3.7.3', 'pip': '20.3.3', 'cores': 4, 'freq': 1200.0, 'ram': 915722240, 'pi_model': 'Raspberry Pi 3 Model B Rev 1.2', 'octopi_version': '0.18.0', 'plugins': ''} 2022-01-12 10:29:48,167 - octoprint.plugins.tracking - INFO - Sent tracking event startup, payload: {'version': '1.7.2', 'os': 'linux', 'bits': 32, 'python': '3.7.3', 'pip': '20.3.3', 'cores': 4, 'freq': 1200.0, 'ram': 915722240, 'pi_model': 'Raspberry Pi 3 Model B Rev 1.2', 'octopi_version': '0.18.0'} 2022-01-12 10:30:56,955 - octoprint.startup - INFO - ****************************************************************************** 2022-01-12 10:30:56,958 - octoprint.startup - INFO - Starting OctoPrint 1.7.2 2022-01-12 10:30:56,960 - octoprint.startup - INFO - ****************************************************************************** 2022-01-12 10:31:00,678 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity changed from offline to online 2022-01-12 10:31:00,679 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: online 2022-01-12 10:31:00,679 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 1.1.1.1:53 is working 2022-01-12 10:31:00,680 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is working 2022-01-12 10:31:00,880 - octoprint.startup - INFO - Blacklist processing done, adding 3 blacklisted plugin versions: roomtemp (any), GcodeEditor (>=0.1.1,<=0.2.8), gcodeleveling (>=0.1.0,<=0.1.1) 2022-01-12 10:31:00,881 - octoprint.plugin.core - WARNING - Invalid version requirement >=0.1.1,<=0.2.8 for blacklist entry GcodeEditor, ignoring 2022-01-12 10:31:00,882 - octoprint.plugin.core - WARNING - Invalid version requirement >=0.1.0,<=0.1.1 for blacklist entry gcodeleveling, ignoring 2022-01-12 10:31:01,149 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2022-01-12 10:31:03,637 - octoprint.plugin.core - INFO - Found 18 plugin(s) providing 18 mixin implementations, 38 hook handlers 2022-01-12 10:31:03,820 - octoprint.server.heartbeat - INFO - Starting server heartbeat, 900.0s interval 2022-01-12 10:31:03,852 - octoprint.server - INFO - Intermediary server started 2022-01-12 10:31:03,888 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/pi/.octoprint/uploads... 2022-01-12 10:31:03,890 - octoprint.filemanager.storage - INFO - ... file metadata for /home/pi/.octoprint/uploads initialized successfully. 2022-01-12 10:31:03,895 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_SHOW (needs: "Need(method='role', value='plugin_action_command_notification_show')") 2022-01-12 10:31:03,896 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_CLEAR (needs: "Need(method='role', value='plugin_action_command_notification_clear')") 2022-01-12 10:31:03,898 - octoprint.server - INFO - Added new permission from plugin action_command_prompt: PLUGIN_ACTION_COMMAND_PROMPT_INTERACT (needs: "Need(method='role', value='plugin_action_command_prompt_interact')") 2022-01-12 10:31:03,899 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_READ (needs: "Need(method='role', value='plugin_announcements_read')") 2022-01-12 10:31:03,900 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_MANAGE (needs: "Need(method='role', value='plugin_announcements_read'), Need(method='role', value='plugin_announcements_manage')") 2022-01-12 10:31:03,900 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_ADMIN (needs: "Need(method='role', value='plugin_appkeys_admin')") 2022-01-12 10:31:03,901 - octoprint.server - INFO - Added new permission from plugin backup: PLUGIN_BACKUP_ACCESS (needs: "Need(method='role', value='plugin_backup_access')") 2022-01-12 10:31:03,901 - octoprint.server - INFO - Added new permission from plugin firmware_check: PLUGIN_FIRMWARE_CHECK_DISPLAY (needs: "Need(method='role', value='plugin_firmware_check_display')") 2022-01-12 10:31:03,902 - octoprint.server - INFO - Added new permission from plugin logging: PLUGIN_LOGGING_MANAGE (needs: "Need(method='role', value='plugin_logging_manage')") 2022-01-12 10:31:03,902 - octoprint.server - INFO - Added new permission from plugin pi_support: PLUGIN_PI_SUPPORT_STATUS (needs: "Need(method='role', value='plugin_pi_support_check')") 2022-01-12 10:31:03,903 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_MANAGE (needs: "Need(method='role', value='plugin_pluginmanager_manage')") 2022-01-12 10:31:03,905 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_INSTALL (needs: "Need(method='role', value='plugin_pluginmanager_manage'), Need(method='role', value='plugin_pluginmanager_install')") 2022-01-12 10:31:03,910 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CHECK (needs: "Need(method='role', value='plugin_softwareupdate_check')") 2022-01-12 10:31:03,911 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_UPDATE (needs: "Need(method='role', value='plugin_softwareupdate_update')") 2022-01-12 10:31:03,913 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CONFIGURE (needs: "Need(method='role', value='plugin_softwareupdate_configure')") 2022-01-12 10:31:05,170 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip 2022-01-12 10:31:06,159 - octoprint.util.pip - INFO - Version of pip is 20.3.3 2022-01-12 10:31:06,161 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-01-12 10:31:06,161 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-01-12 10:31:06,266 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk 2022-01-12 10:31:06,296 - octoprint.plugin.core - INFO - Initialized 18 plugin implementation(s) 2022-01-12 10:31:06,309 - octoprint.plugin.core - INFO - 18 plugin(s) registered with the system: | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/appkeys | Backup & Restore (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/backup | Core Wizard (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/corewizard | Discovery (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/discovery | Error Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/errortracking | Event Manager (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/eventmanager | File Check (2021.2.23) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_file_check | Firmware Check (2021.10.11) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_firmware_check | GCode Viewer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/gcodeviewer | Logging (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/logging | Pi Support Plugin (2021.10.28) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/pluginmanager | Software Update (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/softwareupdate | Virtual Printer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2022-01-12 10:31:06,345 - octoprint.environment - INFO - Detected environment is Python 3.7.3 under Linux (linux). Details: | hardware: | cores: 4 | freq: 1200.0 | ram: 915722240 | os: | bits: 32 | id: linux | platform: linux | plugins: | pi_support: | model: Raspberry Pi 3 Model B Rev 1.2 | octopi_version: 0.18.0 | throttle_state: '0x0' | python: | pip: 20.3.3 | version: 3.7.3 | virtualenv: /home/pi/oprint 2022-01-12 10:31:06,357 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/webassets... 2022-01-12 10:31:06,376 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-cache... 2022-01-12 10:31:07,305 - octoprint.server - INFO - Shutting down intermediary server... 2022-01-12 10:31:07,362 - octoprint.server - INFO - Intermediary server shut down 2022-01-12 10:31:07,365 - octoprint.events - INFO - Processing startup event, this is our first event 2022-01-12 10:31:07,366 - octoprint.events - INFO - Adding 2 events to queue that were held back before startup event 2022-01-12 10:31:07,366 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue... 2022-01-12 10:31:07,408 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue 2022-01-12 10:31:07,416 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json 2022-01-12 10:31:07,452 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder... 2022-01-12 10:31:07,478 - octoprint.server.util.watchdog - INFO - ... initial scan done. 2022-01-12 10:31:07,730 - octoprint.plugins.tracking - INFO - Sent tracking event system_unthrottled, payload: {'throttled_now': False, 'throttled_past': False, 'throttled_mask': 0, 'throttled_voltage_now': False, 'throttled_voltage_past': False, 'throttled_overheat_now': False, 'throttled_overheat_past': False} 2022-01-12 10:31:08,033 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from https://plugins.octoprint.org/plugins.json 2022-01-12 10:31:08,524 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on octopi._http._tcp.local.' for _http._tcp.local. 2022-01-12 10:31:09,442 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on octopi._octoprint._tcp.local.' for _octoprint._tcp.local. 2022-01-12 10:31:09,544 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance on octopi for SSDP 2022-01-12 10:31:09,612 - octoprint.server - INFO - Listening on http://127.0.0.1:5000 2022-01-12 10:31:09,770 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2022-01-12 10:31:10,836 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip 2022-01-12 10:31:10,853 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-01-12 10:31:10,854 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-01-12 10:31:10,950 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 54.1GB. That is considered sufficient for updating. 2022-01-12 10:31:11,552 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 7, 'printer_state': 'OFFLINE'} 2022-01-12 10:31:11,999 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2022-01-12 10:31:12,068 - octoprint.plugins.tracking - INFO - Sent tracking event pong, payload: {'version': '1.7.2', 'os': 'linux', 'bits': 32, 'python': '3.7.3', 'pip': '20.3.3', 'cores': 4, 'freq': 1200.0, 'ram': 915722240, 'pi_model': 'Raspberry Pi 3 Model B Rev 1.2', 'octopi_version': '0.18.0', 'plugins': ''} 2022-01-12 10:31:12,161 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'http://192.168.178.31/', 'path': '/', 'query_string': 'l10n=de'} 2022-01-12 10:31:12,286 - octoprint.plugins.tracking - INFO - Sent tracking event startup, payload: {'version': '1.7.2', 'os': 'linux', 'bits': 32, 'python': '3.7.3', 'pip': '20.3.3', 'cores': 4, 'freq': 1200.0, 'ram': 915722240, 'pi_model': 'Raspberry Pi 3 Model B Rev 1.2', 'octopi_version': '0.18.0'} 2022-01-12 10:31:13,453 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2022-01-12 10:31:13,999 - octoprint.server.util.flask - INFO - Passively logging in user Feuer-Fritz from ::ffff:192.168.178.27 2022-01-12 10:31:14,000 - octoprint.access.users - INFO - Logged in user: Feuer-Fritz 2022-01-12 10:38:25,268 - octoprint.server.preemptive_cache - INFO - ... done in 28.43s 2022-01-12 10:38:25,307 - octoprint.server.util.flask - INFO - Passively logging in user Feuer-Fritz from ::ffff:192.168.178.27 2022-01-12 10:38:25,308 - octoprint.access.users - INFO - Logged in user: Feuer-Fritz 2022-01-12 10:38:26,796 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.178.27 2022-01-12 10:38:26,872 - octoprint.server.util.flask - INFO - Passively logging in user Feuer-Fritz from ::ffff:192.168.178.27 2022-01-12 10:38:26,872 - octoprint.access.users - INFO - Logged in user: Feuer-Fritz 2022-01-12 10:38:27,934 - octoprint.server.util.sockjs - INFO - User Feuer-Fritz logged in on the socket from client ::ffff:192.168.178.27 2022-01-12 10:38:29,152 - octoprint.plugins.tracking - INFO - Sent tracking event webui_load, payload: {'browser_name': 'Chrome', 'browser_version': '97.0.4692.71', 'os_name': 'Windows', 'os_version': '10'} 2022-01-12 10:38:35,773 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2022-01-12 10:38:35,809 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 7 port/baudrate candidates: /dev/ttyUSB0@115200, /dev/ttyUSB0@250000, /dev/ttyUSB0@230400, /dev/ttyUSB0@57600, /dev/ttyUSB0@38400, /dev/ttyUSB0@19200, /dev/ttyUSB0@9600 2022-01-12 10:38:35,810 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200 2022-01-12 10:38:35,811 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200 2022-01-12 10:38:35,827 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-12 10:38:35,833 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-12 10:38:38,821 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2022-01-12 10:38:38,831 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-12 10:38:41,174 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2022-01-12 10:38:41,181 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-12 10:38:43,182 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 250000 2022-01-12 10:38:43,190 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-12 10:38:43,205 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-12 10:38:43,212 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Operational" 2022-01-12 10:38:43,220 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-12 10:38:43,300 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin 1.1.9 (Github, davidramiro) MARLIN-AI3M_VERSION:v1.4.6" 2022-01-12 10:38:43,332 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting 2022-01-12 10:38:43,348 - octoprint.util.comm - INFO - Firmware states that it supports emergency GCODEs to be sent without waiting for an acknowledgement first 2022-01-12 10:38:43,491 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {'firmware_name': 'Marlin 1.1.9 (Github, davidramiro) MARLIN-AI3M_VERSION:v1.4.6', 'printer_port': 'AUTO', 'printer_baudrate': 0} 2022-01-12 10:46:03,823 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2022-01-12 10:46:11,453 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 503, 'printer_state': 'OPERATIONAL'} 2022-01-12 10:49:52,120 - octoprint.filemanager.analysis - INFO - Starting analysis of local:RaspberryPi_Case-Part1.gcode 2022-01-12 10:49:52,121 - octoprint.filemanager.analysis - INFO - Invoking analysis command: /home/pi/oprint/bin/python3 -m octoprint analysis gcode --speed-x=6000 --speed-y=6000 --max-t=10 --throttle=0.0 --throttle-lines=100 --bed-z=0.0 /home/pi/.octoprint/uploads/RaspberryPi_Case-Part1.gcode 2022-01-12 10:50:23,042 - octoprint.filemanager.analysis - INFO - Analysis of entry local:RaspberryPi_Case-Part1.gcode finished, needed 30.92s 2022-01-12 10:53:38,876 - octoprint.printer.standard.job - INFO - Print job selected - origin: local, path: RaspberryPi_Case-Part1.gcode, owner: Feuer-Fritz, user: Feuer-Fritz 2022-01-12 10:53:38,895 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting" 2022-01-12 10:53:38,900 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: RaspberryPi_Case-Part1.gcode, owner: Feuer-Fritz, user: Feuer-Fritz 2022-01-12 10:53:38,959 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-12 10:53:38,976 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Printing" 2022-01-12 10:53:39,264 - octoprint.plugins.tracking - INFO - Sent tracking event print_started, payload: {'origin': 'local', 'file': 'fb27f878721c7607853c4b7c91f41f6e16e622e4'} 2022-01-12 10:53:41,037 - octoprint.util.comm - INFO - Printer seems to support the busy protocol, will adjust timeouts and set busy interval accordingly 2022-01-12 10:54:39,138 - octoprint.util.comm - INFO - Telling the printer to set the busy interval to our "communicationBusy" timeout - 1s = 2s 2022-01-12 10:55:41,499 - octoprint.util.comm - WARNING - Received an error from the printer's firmware: Failed to enable Bed Leveling | Last lines in terminal: | Recv: echo:busy: processing | Recv: T:209.06 /210.00 B:64.99 /65.00 @:50 B@:59 | Recv: echo:busy: processing | Recv: T:209.64 /210.00 B:64.98 /65.00 @:45 B@:62 | Recv: echo:busy: processing | Recv: T:210.36 /210.00 B:65.00 /65.00 @:37 B@:59 | Recv: echo:busy: processing | Recv: T:210.78 /210.00 B:65.02 /65.00 @:34 B@:55 | Recv: echo:busy: processing | Recv: T:211.51 /210.00 B:65.03 /65.00 @:26 B@:53 | Recv: echo:busy: processing | Recv: T:211.51 /210.00 B:65.01 /65.00 @:28 B@:56 | Recv: echo:busy: processing | Recv: T:211.56 /210.00 B:64.99 /65.00 @:28 B@:59 | Recv: echo:busy: processing | Recv: T:211.35 /210.00 B:65.01 /65.00 @:31 B@:54 | Recv: X:-5.00 Y:0.00 Z:0.00 E:0.00 Count X:-404 Y:0 Z:0 | Recv: ok | Send: N14 M420 S1*82 | Recv: Error:Failed to enable Bed Leveling 2022-01-12 10:55:41,500 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Error" 2022-01-12 10:55:41,512 - octoprint.util.comm - INFO - Force-sending M112 to the printer 2022-01-12 10:55:41,554 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2022-01-12 10:55:41,646 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2022-01-12 10:55:41,806 - octoprint.plugins.tracking - INFO - Sent tracking event commerror_firmware, payload: {'commerror_text': 'Failed to enable Bed Leveling'} 2022-01-12 10:55:41,955 - octoprint.plugins.tracking - INFO - Sent tracking event print_failed, payload: {'origin': 'local', 'file': 'fb27f878721c7607853c4b7c91f41f6e16e622e4', 'elapsed': 122, 'reason': 'error', 'commerror_text': 'Failed to enable Bed Leveling'} 2022-01-12 10:55:55,704 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Opening serial connection" 2022-01-12 10:55:55,706 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 250000 2022-01-12 10:55:55,731 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial connection" to "Connecting" 2022-01-12 10:55:55,735 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-12 10:55:56,644 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-12 10:55:59,088 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-12 10:55:59,094 - octoprint.util.comm - INFO - Changing monitoring state from "Connecting" to "Operational" 2022-01-12 10:55:59,166 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-12 10:55:59,188 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin 1.1.9 (Github, davidramiro) MARLIN-AI3M_VERSION:v1.4.6" 2022-01-12 10:55:59,207 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting 2022-01-12 10:55:59,215 - octoprint.util.comm - INFO - Firmware states that it supports emergency GCODEs to be sent without waiting for an acknowledgement first 2022-01-12 10:55:59,382 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {'firmware_name': 'Marlin 1.1.9 (Github, davidramiro) MARLIN-AI3M_VERSION:v1.4.6', 'printer_port': '/dev/ttyUSB0', 'printer_baudrate': 250000} 2022-01-12 10:56:41,121 - octoprint.printer.standard.job - INFO - Print job selected - origin: local, path: RaspberryPi_Case-Part1.gcode, owner: Feuer-Fritz, user: Feuer-Fritz 2022-01-12 10:56:41,142 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting" 2022-01-12 10:56:41,151 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: RaspberryPi_Case-Part1.gcode, owner: Feuer-Fritz, user: Feuer-Fritz 2022-01-12 10:56:41,216 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-12 10:56:41,234 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Printing" 2022-01-12 10:56:41,393 - octoprint.plugins.tracking - INFO - Sent tracking event print_started, payload: {'origin': 'local', 'file': 'fb27f878721c7607853c4b7c91f41f6e16e622e4'} 2022-01-12 10:56:43,289 - octoprint.util.comm - INFO - Printer seems to support the busy protocol, will adjust timeouts and set busy interval accordingly 2022-01-12 10:57:41,390 - octoprint.util.comm - INFO - Telling the printer to set the busy interval to our "communicationBusy" timeout - 1s = 2s 2022-01-12 10:59:18,276 - octoprint.util.comm - WARNING - Received an error from the printer's firmware: Failed to enable Bed Leveling | Last lines in terminal: | Recv: T:211.67 /210.00 B:65.00 /65.00 @:24 B@:49 W:2 | Recv: T:212.14 /210.00 B:65.00 /65.00 @:20 B@:49 W:1 | Recv: echo:busy: processing | Recv: T:212.14 /210.00 B:65.00 /65.00 @:20 B@:49 | Recv: T:212.50 /210.00 B:65.00 /65.00 @:17 B@:49 W:0 | Recv: ok | Send: N12 M300 S1000 P500*36 | Recv: ok | Send: N13 G28 X0 Y10 Z0*91 | Recv: T:212.60 /210.00 B:64.98 /65.00 @:18 B@:54 | Recv: echo:busy: processing | Recv: T:212.76 /210.00 B:64.98 /65.00 @:18 B@:54 | Recv: echo:busy: processing | Recv: T:212.50 /210.00 B:64.99 /65.00 @:22 B@:52 | Recv: echo:busy: processing | Recv: T:211.88 /210.00 B:64.99 /65.00 @:30 B@:52 | Recv: X:-5.00 Y:0.00 Z:0.00 E:0.00 Count X:-404 Y:0 Z:0 | Recv: ok | Send: N14 M420 S1*82 | Recv: Error:Failed to enable Bed Leveling 2022-01-12 10:59:18,277 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Error" 2022-01-12 10:59:18,284 - octoprint.util.comm - INFO - Force-sending M112 to the printer 2022-01-12 10:59:18,308 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2022-01-12 10:59:18,328 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2022-01-12 10:59:18,655 - octoprint.plugins.tracking - INFO - Sent tracking event commerror_firmware, payload: {'commerror_text': 'Failed to enable Bed Leveling'} 2022-01-12 10:59:18,804 - octoprint.plugins.tracking - INFO - Sent tracking event print_failed, payload: {'origin': 'local', 'file': 'fb27f878721c7607853c4b7c91f41f6e16e622e4', 'elapsed': 157, 'reason': 'error', 'commerror_text': 'Failed to enable Bed Leveling'} 2022-01-12 11:01:03,824 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2022-01-12 11:01:11,461 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 1403, 'printer_state': 'OFFLINE'} 2022-01-12 11:01:44,363 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Opening serial connection" 2022-01-12 11:01:44,365 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 250000 2022-01-12 11:01:44,398 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial connection" to "Connecting" 2022-01-12 11:01:44,402 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-12 11:01:45,314 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-12 11:01:47,756 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-12 11:01:47,760 - octoprint.util.comm - INFO - Changing monitoring state from "Connecting" to "Operational" 2022-01-12 11:01:47,838 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-12 11:01:47,859 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin 1.1.9 (Github, davidramiro) MARLIN-AI3M_VERSION:v1.4.6" 2022-01-12 11:01:47,879 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting 2022-01-12 11:01:47,890 - octoprint.util.comm - INFO - Firmware states that it supports emergency GCODEs to be sent without waiting for an acknowledgement first 2022-01-12 11:01:48,037 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {'firmware_name': 'Marlin 1.1.9 (Github, davidramiro) MARLIN-AI3M_VERSION:v1.4.6', 'printer_port': '/dev/ttyUSB0', 'printer_baudrate': 250000} 2022-01-12 11:05:23,648 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.178.27 2022-01-12 11:06:03,819 - octoprint.printer.standard.job - INFO - Print job selected - origin: sdcard, path: raspbe~1.gco, owner: None, user: None 2022-01-12 11:06:07,560 - octoprint.util.comm - INFO - Printer seems to support the busy protocol, will adjust timeouts and set busy interval accordingly 2022-01-12 11:09:09,020 - octoprint.util.comm - WARNING - Received an error from the printer's firmware: Failed to enable Bed Leveling | Last lines in terminal: | Recv: T:209.82 /210.00 B:65.03 /65.00 @:40 B@:51 W:5 | Recv: T:209.82 /210.00 B:65.03 /65.00 @:40 B@:51 | Recv: T:210.05 /210.00 B:65.02 /65.00 @:41 B@:52 W:4 | Recv: echo:busy: processing | Recv: T:210.83 /210.00 B:65.01 /65.00 @:32 B@:53 W:3 | Recv: T:210.83 /210.00 B:65.01 /65.00 @:32 B@:53 | Recv: T:211.67 /210.00 B:65.01 /65.00 @:23 B@:53 W:2 | Recv: echo:busy: processing | Recv: T:211.67 /210.00 B:65.00 /65.00 @:26 B@:54 W:1 | Recv: T:211.67 /210.00 B:65.00 /65.00 @:26 B@:54 | Recv: T:212.50 /210.00 B:65.00 /65.00 @:16 B@:54 W:0 | Recv: T:212.50 /210.00 B:65.01 /65.00 @:18 B@:52 | Recv: echo:busy: processing | Recv: T:212.60 /210.00 B:65.02 /65.00 @:19 B@:50 | Recv: echo:busy: processing | Recv: T:212.50 /210.00 B:64.98 /65.00 @:21 B@:57 | Recv: echo:busy: processing | Recv: T:212.03 /210.00 B:65.01 /65.00 @:26 B@:51 | Recv: X:-5.00 Y:0.00 Z:0.00 E:0.00 Count X:-404 Y:0 Z:0 | Recv: Error:Failed to enable Bed Leveling 2022-01-12 11:09:09,021 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Error" 2022-01-12 11:09:09,024 - octoprint.util.comm - INFO - Force-sending M112 to the printer 2022-01-12 11:09:09,059 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2022-01-12 11:09:09,079 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2022-01-12 11:09:09,351 - octoprint.plugins.tracking - INFO - Sent tracking event commerror_firmware, payload: {'commerror_text': 'Failed to enable Bed Leveling'} 2022-01-12 11:16:03,826 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2022-01-12 11:16:11,469 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 2303, 'printer_state': 'OFFLINE'} 2022-01-12 11:31:03,827 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2022-01-12 11:31:11,467 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 3203, 'printer_state': 'OFFLINE'} 2022-01-12 11:46:03,829 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2022-01-12 11:46:11,434 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 4103, 'printer_state': 'OFFLINE'} 2022-01-12 12:01:03,833 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2022-01-12 12:01:11,465 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 5003, 'printer_state': 'OFFLINE'} 2022-01-12 12:16:03,835 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2022-01-12 12:16:11,471 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 5903, 'printer_state': 'OFFLINE'} 2022-01-12 12:31:03,836 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2022-01-12 12:31:11,451 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 6803, 'printer_state': 'OFFLINE'} 2022-01-12 12:46:03,838 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2022-01-12 12:46:11,479 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 7703, 'printer_state': 'OFFLINE'} 2022-01-12 13:01:03,839 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2022-01-12 13:01:11,486 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 8603, 'printer_state': 'OFFLINE'} 2022-01-12 13:16:03,840 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2022-01-12 13:16:11,481 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 9503, 'printer_state': 'OFFLINE'} 2022-01-12 13:31:03,841 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2022-01-12 13:31:11,473 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 10403, 'printer_state': 'OFFLINE'} 2022-01-12 13:46:03,843 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2022-01-12 13:46:11,495 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 11303, 'printer_state': 'OFFLINE'} 2022-01-12 14:01:03,844 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2022-01-12 14:01:11,480 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 12203, 'printer_state': 'OFFLINE'} 2022-01-12 14:16:03,846 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2022-01-12 14:16:11,476 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 13103, 'printer_state': 'OFFLINE'} 2022-01-12 14:31:03,848 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2022-01-12 14:31:11,465 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 14003, 'printer_state': 'OFFLINE'} 2022-01-12 14:46:03,849 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2022-01-12 14:46:11,484 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 14903, 'printer_state': 'OFFLINE'} 2022-01-12 15:01:03,851 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2022-01-12 15:01:11,497 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 15803, 'printer_state': 'OFFLINE'} 2022-01-12 15:16:03,852 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2022-01-12 15:16:11,493 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 16703, 'printer_state': 'OFFLINE'} 2022-01-12 15:31:03,854 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2022-01-12 15:31:11,504 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 17603, 'printer_state': 'OFFLINE'} 2022-01-12 15:46:03,855 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2022-01-12 15:46:11,497 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 18503, 'printer_state': 'OFFLINE'} 2022-01-12 16:01:03,857 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2022-01-12 16:01:11,486 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 19403, 'printer_state': 'OFFLINE'} 2022-01-12 16:05:09,334 - octoprint.server.util.flask - INFO - Passively logging in user Feuer-Fritz from ::ffff:192.168.178.27 2022-01-12 16:05:09,335 - octoprint.access.users - INFO - Logged in user: Feuer-Fritz 2022-01-12 16:05:09,940 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.178.27 2022-01-12 16:05:09,969 - octoprint.server.util.flask - INFO - Passively logging in user Feuer-Fritz from ::ffff:192.168.178.27 2022-01-12 16:05:09,970 - octoprint.access.users - INFO - Logged in user: Feuer-Fritz 2022-01-12 16:05:10,759 - octoprint.server.util.sockjs - INFO - User Feuer-Fritz logged in on the socket from client ::ffff:192.168.178.27 2022-01-12 16:05:11,941 - octoprint.plugins.tracking - INFO - Sent tracking event webui_load, payload: {'browser_name': 'Chrome', 'browser_version': '97.0.4692.71', 'os_name': 'Windows', 'os_version': '10'} 2022-01-12 16:05:18,221 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.178.27 2022-01-12 16:05:20,869 - octoprint.server.util.flask - INFO - Passively logging in user Feuer-Fritz from ::ffff:192.168.178.27 2022-01-12 16:05:20,870 - octoprint.access.users - INFO - Logged in user: Feuer-Fritz 2022-01-12 16:05:21,432 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.178.27 2022-01-12 16:05:21,471 - octoprint.server.util.flask - INFO - Passively logging in user Feuer-Fritz from ::ffff:192.168.178.27 2022-01-12 16:05:21,472 - octoprint.access.users - INFO - Logged in user: Feuer-Fritz 2022-01-12 16:05:22,140 - octoprint.server.util.sockjs - INFO - User Feuer-Fritz logged in on the socket from client ::ffff:192.168.178.27 2022-01-12 16:05:23,093 - octoprint.plugins.tracking - INFO - Sent tracking event webui_load, payload: {'browser_name': 'Chrome', 'browser_version': '97.0.4692.71', 'os_name': 'Windows', 'os_version': '10'} 2022-01-12 16:10:01,933 - octoprint.server.api.system - INFO - Performing command for core:restart_safe: sudo service octoprint restart 2022-01-12 16:10:02,194 - octoprint.server - INFO - Shutting down... 2022-01-12 16:10:02,200 - octoprint.server.api.system - WARNING - Command for core:restart_safe failed with return code -15: ! STDOUT: ! STDERR: 2022-01-12 16:10:02,926 - octoprint.server - INFO - Calling on_shutdown on plugins 2022-01-12 16:10:02,928 - octoprint.events - INFO - Processing shutdown event, this will be our last event 2022-01-12 16:10:02,934 - octoprint.events - INFO - Event loop shut down 2022-01-12 16:10:03,338 - octoprint.plugins.tracking - INFO - Sent tracking event shutdown, payload: {} 2022-01-12 16:10:03,339 - octoprint.server - INFO - Goodbye! 2022-01-12 16:10:05,855 - octoprint.startup - INFO - ****************************************************************************** 2022-01-12 16:10:05,859 - octoprint.startup - INFO - Starting OctoPrint 1.7.2 2022-01-12 16:10:05,860 - octoprint.startup - INFO - Starting in SAFE MODE. Third party plugins will be disabled! 2022-01-12 16:10:05,861 - octoprint.startup - INFO - Reason for safe mode: setting in config.yaml 2022-01-12 16:10:05,862 - octoprint.startup - INFO - ****************************************************************************** 2022-01-12 16:10:06,384 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity changed from offline to online 2022-01-12 16:10:06,439 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: online 2022-01-12 16:10:06,440 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 1.1.1.1:53 is working 2022-01-12 16:10:06,440 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is working 2022-01-12 16:10:06,625 - octoprint.startup - INFO - Blacklist processing done, adding 3 blacklisted plugin versions: roomtemp (any), GcodeEditor (>=0.1.1,<=0.2.8), gcodeleveling (>=0.1.0,<=0.1.1) 2022-01-12 16:10:06,626 - octoprint.plugin.core - WARNING - Invalid version requirement >=0.1.1,<=0.2.8 for blacklist entry GcodeEditor, ignoring 2022-01-12 16:10:06,626 - octoprint.plugin.core - WARNING - Invalid version requirement >=0.1.0,<=0.1.1 for blacklist entry gcodeleveling, ignoring 2022-01-12 16:10:06,682 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2022-01-12 16:10:08,340 - octoprint.plugin.core - INFO - Found 18 plugin(s) providing 18 mixin implementations, 38 hook handlers 2022-01-12 16:10:08,498 - octoprint.server.heartbeat - INFO - Starting server heartbeat, 900.0s interval 2022-01-12 16:10:08,507 - octoprint.server - INFO - Intermediary server started 2022-01-12 16:10:08,540 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/pi/.octoprint/uploads... 2022-01-12 16:10:08,576 - octoprint.filemanager.storage - INFO - ... file metadata for /home/pi/.octoprint/uploads initialized successfully. 2022-01-12 16:10:08,584 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_SHOW (needs: "Need(method='role', value='plugin_action_command_notification_show')") 2022-01-12 16:10:08,585 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_CLEAR (needs: "Need(method='role', value='plugin_action_command_notification_clear')") 2022-01-12 16:10:08,586 - octoprint.server - INFO - Added new permission from plugin action_command_prompt: PLUGIN_ACTION_COMMAND_PROMPT_INTERACT (needs: "Need(method='role', value='plugin_action_command_prompt_interact')") 2022-01-12 16:10:08,586 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_READ (needs: "Need(method='role', value='plugin_announcements_read')") 2022-01-12 16:10:08,587 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_MANAGE (needs: "Need(method='role', value='plugin_announcements_read'), Need(method='role', value='plugin_announcements_manage')") 2022-01-12 16:10:08,587 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_ADMIN (needs: "Need(method='role', value='plugin_appkeys_admin')") 2022-01-12 16:10:08,588 - octoprint.server - INFO - Added new permission from plugin backup: PLUGIN_BACKUP_ACCESS (needs: "Need(method='role', value='plugin_backup_access')") 2022-01-12 16:10:08,589 - octoprint.server - INFO - Added new permission from plugin firmware_check: PLUGIN_FIRMWARE_CHECK_DISPLAY (needs: "Need(method='role', value='plugin_firmware_check_display')") 2022-01-12 16:10:08,589 - octoprint.server - INFO - Added new permission from plugin logging: PLUGIN_LOGGING_MANAGE (needs: "Need(method='role', value='plugin_logging_manage')") 2022-01-12 16:10:08,592 - octoprint.server - INFO - Added new permission from plugin pi_support: PLUGIN_PI_SUPPORT_STATUS (needs: "Need(method='role', value='plugin_pi_support_check')") 2022-01-12 16:10:08,594 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_MANAGE (needs: "Need(method='role', value='plugin_pluginmanager_manage')") 2022-01-12 16:10:08,597 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_INSTALL (needs: "Need(method='role', value='plugin_pluginmanager_install'), Need(method='role', value='plugin_pluginmanager_manage')") 2022-01-12 16:10:08,599 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CHECK (needs: "Need(method='role', value='plugin_softwareupdate_check')") 2022-01-12 16:10:08,600 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_UPDATE (needs: "Need(method='role', value='plugin_softwareupdate_update')") 2022-01-12 16:10:08,602 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CONFIGURE (needs: "Need(method='role', value='plugin_softwareupdate_configure')") 2022-01-12 16:10:09,745 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip 2022-01-12 16:10:10,725 - octoprint.util.pip - INFO - Version of pip is 20.3.3 2022-01-12 16:10:10,727 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-01-12 16:10:10,728 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-01-12 16:10:10,826 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk 2022-01-12 16:10:10,859 - octoprint.plugin.core - INFO - Initialized 18 plugin implementation(s) 2022-01-12 16:10:10,875 - octoprint.plugin.core - INFO - 18 plugin(s) registered with the system: | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/appkeys | Backup & Restore (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/backup | Core Wizard (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/corewizard | Discovery (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/discovery | Error Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/errortracking | Event Manager (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/eventmanager | File Check (2021.2.23) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_file_check | Firmware Check (2021.10.11) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_firmware_check | GCode Viewer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/gcodeviewer | Logging (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/logging | Pi Support Plugin (2021.10.28) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/pluginmanager | Software Update (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/softwareupdate | Virtual Printer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2022-01-12 16:10:10,924 - octoprint.environment - INFO - Detected environment is Python 3.7.3 under Linux (linux). Details: | hardware: | cores: 4 | freq: 1200.0 | ram: 915722240 | os: | bits: 32 | id: linux | platform: linux | plugins: | pi_support: | model: Raspberry Pi 3 Model B Rev 1.2 | octopi_version: 0.18.0 | throttle_state: '0x0' | python: | pip: 20.3.3 | version: 3.7.3 | virtualenv: /home/pi/oprint 2022-01-12 16:10:10,942 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/webassets... 2022-01-12 16:10:10,967 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-cache... 2022-01-12 16:10:11,843 - octoprint.server - INFO - Shutting down intermediary server... 2022-01-12 16:10:11,869 - octoprint.server - INFO - Intermediary server shut down 2022-01-12 16:10:11,871 - octoprint.events - INFO - Processing startup event, this is our first event 2022-01-12 16:10:11,872 - octoprint.events - INFO - Adding 2 events to queue that were held back before startup event 2022-01-12 16:10:11,876 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue... 2022-01-12 16:10:11,885 - octoprint.server - INFO - Autoconnect on startup is configured, trying to connect to the printer... 2022-01-12 16:10:11,939 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue 2022-01-12 16:10:11,948 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2022-01-12 16:10:11,950 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json 2022-01-12 16:10:12,321 - octoprint.plugins.tracking - INFO - Sent tracking event system_unthrottled, payload: {'throttled_now': False, 'throttled_past': False, 'throttled_mask': 0, 'throttled_voltage_now': False, 'throttled_voltage_past': False, 'throttled_overheat_now': False, 'throttled_overheat_past': False} 2022-01-12 16:10:13,937 - octoprint.server - INFO - Trying to connect to configured serial port None 2022-01-12 16:10:14,141 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2022-01-12 16:10:14,233 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 0 port/baudrate candidates: 2022-01-12 16:10:14,233 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Error" 2022-01-12 16:10:14,235 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2022-01-12 16:10:14,247 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2022-01-12 16:10:14,247 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder... 2022-01-12 16:10:14,294 - octoprint.server.util.watchdog - INFO - ... initial scan done. 2022-01-12 16:10:14,500 - octoprint.plugins.tracking - INFO - Sent tracking event commerror_autodetect, payload: {'commerror_text': 'No more candidates to test, and no working port/baudrate combination detected.'} 2022-01-12 16:10:14,981 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2022-01-12 16:10:15,179 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on octopi._http._tcp.local.' for _http._tcp.local. 2022-01-12 16:10:16,002 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on octopi._octoprint._tcp.local.' for _octoprint._tcp.local. 2022-01-12 16:10:16,007 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance on octopi for SSDP 2022-01-12 16:10:16,063 - octoprint.server - INFO - Listening on http://127.0.0.1:5000 2022-01-12 16:10:16,064 - octoprint.server - INFO - Server started successfully in safe mode as requested from config, removing flag 2022-01-12 16:10:16,272 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2022-01-12 16:10:16,373 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.178.27 2022-01-12 16:10:16,587 - octoprint.server.util.flask - INFO - Passively logging in user Feuer-Fritz from ::ffff:192.168.178.27 2022-01-12 16:10:16,593 - octoprint.access.users - INFO - Logged in user: Feuer-Fritz 2022-01-12 16:10:17,354 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip 2022-01-12 16:10:17,366 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-01-12 16:10:17,367 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-01-12 16:10:17,412 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 54.1GB. That is considered sufficient for updating. 2022-01-12 16:10:17,942 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 9, 'printer_state': 'OFFLINE'} 2022-01-12 16:10:17,989 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'http://192.168.178.31/', 'path': '/', 'query_string': 'l10n=de'} 2022-01-12 16:10:18,341 - octoprint.plugins.tracking - INFO - Sent tracking event pong, payload: {'version': '1.7.2', 'os': 'linux', 'bits': 32, 'python': '3.7.3', 'pip': '20.3.3', 'cores': 4, 'freq': 1200.0, 'ram': 915722240, 'pi_model': 'Raspberry Pi 3 Model B Rev 1.2', 'octopi_version': '0.18.0', 'plugins': ''} 2022-01-12 16:10:18,709 - octoprint.plugins.tracking - INFO - Sent tracking event startup, payload: {'version': '1.7.2', 'os': 'linux', 'bits': 32, 'python': '3.7.3', 'pip': '20.3.3', 'cores': 4, 'freq': 1200.0, 'ram': 915722240, 'pi_model': 'Raspberry Pi 3 Model B Rev 1.2', 'octopi_version': '0.18.0'} 2022-01-12 16:10:19,853 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2022-01-12 16:10:20,564 - octoprint.server.util.sockjs - INFO - User Feuer-Fritz logged in on the socket from client ::ffff:192.168.178.27 2022-01-12 16:10:24,337 - octoprint.server.util.flask - INFO - Passively logging in user Feuer-Fritz from ::ffff:192.168.178.27 2022-01-12 16:10:24,337 - octoprint.access.users - INFO - Logged in user: Feuer-Fritz 2022-01-12 16:10:38,459 - octoprint.server.preemptive_cache - INFO - ... done in 20.47s 2022-01-12 16:10:38,510 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.178.27 2022-01-12 16:10:38,861 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.178.27 2022-01-12 16:10:38,944 - octoprint.server.util.flask - INFO - Passively logging in user Feuer-Fritz from ::ffff:192.168.178.27 2022-01-12 16:10:38,944 - octoprint.access.users - INFO - Logged in user: Feuer-Fritz 2022-01-12 16:10:39,864 - octoprint.server.util.sockjs - INFO - User Feuer-Fritz logged in on the socket from client ::ffff:192.168.178.27 2022-01-12 16:10:40,713 - octoprint.plugins.tracking - INFO - Sent tracking event webui_load, payload: {'browser_name': 'Chrome', 'browser_version': '97.0.4692.71', 'os_name': 'Windows', 'os_version': '10'} 2022-01-12 16:17:21,902 - octoprint.server.api.system - INFO - Performing command for core:restart: sudo service octoprint restart 2022-01-12 16:17:21,994 - octoprint.server - INFO - Shutting down... 2022-01-12 16:17:21,999 - octoprint.server.api.system - WARNING - Command for core:restart failed with return code -15: ! STDOUT: ! STDERR: 2022-01-12 16:17:22,639 - octoprint.server - INFO - Calling on_shutdown on plugins 2022-01-12 16:17:22,642 - octoprint.events - INFO - Processing shutdown event, this will be our last event 2022-01-12 16:17:22,654 - octoprint.events - INFO - Event loop shut down 2022-01-12 16:17:23,059 - octoprint.plugins.tracking - INFO - Sent tracking event shutdown, payload: {} 2022-01-12 16:17:23,060 - octoprint.server - INFO - Goodbye! 2022-01-12 16:17:25,564 - octoprint.startup - INFO - ****************************************************************************** 2022-01-12 16:17:25,568 - octoprint.startup - INFO - Starting OctoPrint 1.7.2 2022-01-12 16:17:25,569 - octoprint.startup - INFO - ****************************************************************************** 2022-01-12 16:17:26,089 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity changed from offline to online 2022-01-12 16:17:26,141 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: online 2022-01-12 16:17:26,142 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 1.1.1.1:53 is working 2022-01-12 16:17:26,142 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is working 2022-01-12 16:17:26,156 - octoprint.startup - INFO - Blacklist processing done, adding 3 blacklisted plugin versions: roomtemp (any), GcodeEditor (>=0.1.1,<=0.2.8), gcodeleveling (>=0.1.0,<=0.1.1) 2022-01-12 16:17:26,220 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2022-01-12 16:17:27,904 - octoprint.plugin.core - INFO - Found 18 plugin(s) providing 18 mixin implementations, 38 hook handlers 2022-01-12 16:17:28,073 - octoprint.server.heartbeat - INFO - Starting server heartbeat, 900.0s interval 2022-01-12 16:17:28,084 - octoprint.server - INFO - Intermediary server started 2022-01-12 16:17:28,119 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/pi/.octoprint/uploads... 2022-01-12 16:17:28,153 - octoprint.filemanager.storage - INFO - ... file metadata for /home/pi/.octoprint/uploads initialized successfully. 2022-01-12 16:17:28,160 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_SHOW (needs: "Need(method='role', value='plugin_action_command_notification_show')") 2022-01-12 16:17:28,161 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_CLEAR (needs: "Need(method='role', value='plugin_action_command_notification_clear')") 2022-01-12 16:17:28,162 - octoprint.server - INFO - Added new permission from plugin action_command_prompt: PLUGIN_ACTION_COMMAND_PROMPT_INTERACT (needs: "Need(method='role', value='plugin_action_command_prompt_interact')") 2022-01-12 16:17:28,163 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_READ (needs: "Need(method='role', value='plugin_announcements_read')") 2022-01-12 16:17:28,163 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_MANAGE (needs: "Need(method='role', value='plugin_announcements_manage'), Need(method='role', value='plugin_announcements_read')") 2022-01-12 16:17:28,164 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_ADMIN (needs: "Need(method='role', value='plugin_appkeys_admin')") 2022-01-12 16:17:28,165 - octoprint.server - INFO - Added new permission from plugin backup: PLUGIN_BACKUP_ACCESS (needs: "Need(method='role', value='plugin_backup_access')") 2022-01-12 16:17:28,167 - octoprint.server - INFO - Added new permission from plugin firmware_check: PLUGIN_FIRMWARE_CHECK_DISPLAY (needs: "Need(method='role', value='plugin_firmware_check_display')") 2022-01-12 16:17:28,169 - octoprint.server - INFO - Added new permission from plugin logging: PLUGIN_LOGGING_MANAGE (needs: "Need(method='role', value='plugin_logging_manage')") 2022-01-12 16:17:28,175 - octoprint.server - INFO - Added new permission from plugin pi_support: PLUGIN_PI_SUPPORT_STATUS (needs: "Need(method='role', value='plugin_pi_support_check')") 2022-01-12 16:17:28,179 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_MANAGE (needs: "Need(method='role', value='plugin_pluginmanager_manage')") 2022-01-12 16:17:28,180 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_INSTALL (needs: "Need(method='role', value='plugin_pluginmanager_manage'), Need(method='role', value='plugin_pluginmanager_install')") 2022-01-12 16:17:28,183 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CHECK (needs: "Need(method='role', value='plugin_softwareupdate_check')") 2022-01-12 16:17:28,185 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_UPDATE (needs: "Need(method='role', value='plugin_softwareupdate_update')") 2022-01-12 16:17:28,187 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CONFIGURE (needs: "Need(method='role', value='plugin_softwareupdate_configure')") 2022-01-12 16:17:29,363 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip 2022-01-12 16:17:30,347 - octoprint.util.pip - INFO - Version of pip is 20.3.3 2022-01-12 16:17:30,349 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-01-12 16:17:30,350 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-01-12 16:17:30,463 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk 2022-01-12 16:17:30,514 - octoprint.plugin.core - INFO - Initialized 18 plugin implementation(s) 2022-01-12 16:17:30,589 - octoprint.plugin.core - INFO - 18 plugin(s) registered with the system: | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/appkeys | Backup & Restore (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/backup | Core Wizard (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/corewizard | Discovery (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/discovery | Error Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/errortracking | Event Manager (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/eventmanager | File Check (2021.2.23) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_file_check | Firmware Check (2021.10.11) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_firmware_check | GCode Viewer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/gcodeviewer | Logging (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/logging | Pi Support Plugin (2021.10.28) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/pluginmanager | Software Update (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/softwareupdate | Virtual Printer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2022-01-12 16:17:30,641 - octoprint.environment - INFO - Detected environment is Python 3.7.3 under Linux (linux). Details: | hardware: | cores: 4 | freq: 1200.0 | ram: 915722240 | os: | bits: 32 | id: linux | platform: linux | plugins: | pi_support: | model: Raspberry Pi 3 Model B Rev 1.2 | octopi_version: 0.18.0 | throttle_state: '0x0' | python: | pip: 20.3.3 | version: 3.7.3 | virtualenv: /home/pi/oprint 2022-01-12 16:17:30,684 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/webassets... 2022-01-12 16:17:30,710 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-cache... 2022-01-12 16:17:31,667 - octoprint.server - INFO - Shutting down intermediary server... 2022-01-12 16:17:31,732 - octoprint.server - INFO - Intermediary server shut down 2022-01-12 16:17:31,734 - octoprint.events - INFO - Processing startup event, this is our first event 2022-01-12 16:17:31,735 - octoprint.events - INFO - Adding 2 events to queue that were held back before startup event 2022-01-12 16:17:31,737 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue... 2022-01-12 16:17:31,744 - octoprint.server - INFO - Autoconnect on startup is configured, trying to connect to the printer... 2022-01-12 16:17:31,766 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue 2022-01-12 16:17:31,879 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json 2022-01-12 16:17:31,925 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2022-01-12 16:17:32,483 - octoprint.plugins.tracking - INFO - Sent tracking event system_unthrottled, payload: {'throttled_now': False, 'throttled_past': False, 'throttled_mask': 0, 'throttled_voltage_now': False, 'throttled_voltage_past': False, 'throttled_overheat_now': False, 'throttled_overheat_past': False} 2022-01-12 16:17:33,442 - octoprint.server - INFO - Trying to connect to configured serial port None 2022-01-12 16:17:33,639 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2022-01-12 16:17:33,669 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder... 2022-01-12 16:17:33,693 - octoprint.server.util.watchdog - INFO - ... initial scan done. 2022-01-12 16:17:34,695 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on octopi._http._tcp.local.' for _http._tcp.local. 2022-01-12 16:17:34,808 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 0 port/baudrate candidates: 2022-01-12 16:17:34,808 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Error" 2022-01-12 16:17:34,810 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2022-01-12 16:17:34,958 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2022-01-12 16:17:34,983 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2022-01-12 16:17:35,077 - octoprint.plugins.tracking - INFO - Sent tracking event commerror_autodetect, payload: {'commerror_text': 'No more candidates to test, and no working port/baudrate combination detected.'} 2022-01-12 16:17:35,565 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on octopi._octoprint._tcp.local.' for _octoprint._tcp.local. 2022-01-12 16:17:35,594 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance on octopi for SSDP 2022-01-12 16:17:35,628 - octoprint.server - INFO - Listening on http://127.0.0.1:5000 2022-01-12 16:17:35,733 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.178.27 2022-01-12 16:17:35,766 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2022-01-12 16:17:36,044 - octoprint.server.util.flask - INFO - Passively logging in user Feuer-Fritz from ::ffff:192.168.178.27 2022-01-12 16:17:36,045 - octoprint.access.users - INFO - Logged in user: Feuer-Fritz 2022-01-12 16:17:36,402 - octoprint.server.util.sockjs - INFO - User Feuer-Fritz logged in on the socket from client ::ffff:192.168.178.27 2022-01-12 16:17:36,821 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip 2022-01-12 16:17:36,835 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-01-12 16:17:36,835 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-01-12 16:17:36,914 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 54.1GB. That is considered sufficient for updating. 2022-01-12 16:17:37,553 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 9, 'printer_state': 'OFFLINE'} 2022-01-12 16:17:37,721 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'http://192.168.178.31/', 'path': '/', 'query_string': 'l10n=de'} 2022-01-12 16:17:37,894 - octoprint.plugins.tracking - INFO - Sent tracking event pong, payload: {'version': '1.7.2', 'os': 'linux', 'bits': 32, 'python': '3.7.3', 'pip': '20.3.3', 'cores': 4, 'freq': 1200.0, 'ram': 915722240, 'pi_model': 'Raspberry Pi 3 Model B Rev 1.2', 'octopi_version': '0.18.0', 'plugins': ''} 2022-01-12 16:17:38,182 - octoprint.plugins.tracking - INFO - Sent tracking event startup, payload: {'version': '1.7.2', 'os': 'linux', 'bits': 32, 'python': '3.7.3', 'pip': '20.3.3', 'cores': 4, 'freq': 1200.0, 'ram': 915722240, 'pi_model': 'Raspberry Pi 3 Model B Rev 1.2', 'octopi_version': '0.18.0'} 2022-01-12 16:17:39,073 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2022-01-12 16:17:40,411 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.178.27 2022-01-12 16:17:41,120 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.178.27 2022-01-12 16:17:41,205 - octoprint.server.util.flask - INFO - Passively logging in user Feuer-Fritz from ::ffff:192.168.178.27 2022-01-12 16:17:41,205 - octoprint.access.users - INFO - Logged in user: Feuer-Fritz 2022-01-12 16:17:41,246 - octoprint.server.util.sockjs - INFO - User Feuer-Fritz logged in on the socket from client ::ffff:192.168.178.27 2022-01-12 16:17:51,266 - octoprint.server.preemptive_cache - INFO - ... done in 13.55s 2022-01-12 16:18:46,973 - octoprint.server.util.flask - INFO - Passively logging in user Feuer-Fritz from ::ffff:192.168.178.27 2022-01-12 16:18:46,974 - octoprint.access.users - INFO - Logged in user: Feuer-Fritz 2022-01-12 16:18:47,134 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.178.27 2022-01-12 16:18:47,470 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.178.27 2022-01-12 16:18:47,508 - octoprint.server.util.flask - INFO - Passively logging in user Feuer-Fritz from ::ffff:192.168.178.27 2022-01-12 16:18:47,508 - octoprint.access.users - INFO - Logged in user: Feuer-Fritz 2022-01-12 16:18:48,327 - octoprint.server.util.sockjs - INFO - User Feuer-Fritz logged in on the socket from client ::ffff:192.168.178.27 2022-01-12 16:18:49,404 - octoprint.plugins.tracking - INFO - Sent tracking event webui_load, payload: {'browser_name': 'Chrome', 'browser_version': '97.0.4692.71', 'os_name': 'Windows', 'os_version': '10'} 2022-01-12 16:18:55,036 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2022-01-12 16:18:55,100 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 0 port/baudrate candidates: 2022-01-12 16:18:55,100 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Error" 2022-01-12 16:18:55,104 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2022-01-12 16:18:55,239 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2022-01-12 16:18:55,340 - octoprint.plugins.tracking - INFO - Sent tracking event commerror_autodetect, payload: {'commerror_text': 'No more candidates to test, and no working port/baudrate combination detected.'} 2022-01-12 16:32:28,075 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2022-01-12 16:32:37,335 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 909, 'printer_state': 'OFFLINE'} 2022-01-12 16:36:23,677 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.178.27 2022-01-12 16:36:37,923 - octoprint.server.util.flask - INFO - Passively logging in user Feuer-Fritz from ::ffff:192.168.178.27 2022-01-12 16:36:37,924 - octoprint.access.users - INFO - Logged in user: Feuer-Fritz 2022-01-12 16:36:39,778 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.178.27 2022-01-12 16:36:39,845 - octoprint.server.util.flask - INFO - Passively logging in user Feuer-Fritz from ::ffff:192.168.178.27 2022-01-12 16:36:39,845 - octoprint.access.users - INFO - Logged in user: Feuer-Fritz 2022-01-12 16:36:40,598 - octoprint.server.util.sockjs - INFO - User Feuer-Fritz logged in on the socket from client ::ffff:192.168.178.27 2022-01-12 16:36:41,072 - octoprint.plugins.announcements - INFO - Loaded channel _important from https://octoprint.org/feeds/important.xml in 0.23s 2022-01-12 16:36:41,310 - octoprint.plugins.announcements - INFO - Loaded channel _releases from https://octoprint.org/feeds/releases.xml in 0.15s 2022-01-12 16:36:41,553 - octoprint.plugins.announcements - INFO - Loaded channel _blog from https://octoprint.org/feeds/octoblog.xml in 0.19s 2022-01-12 16:36:41,758 - octoprint.plugins.announcements - INFO - Loaded channel _plugins from https://plugins.octoprint.org/feed.xml in 0.16s 2022-01-12 16:36:41,988 - octoprint.plugins.announcements - INFO - Loaded channel _octopi from https://octoprint.org/feeds/octopi.xml in 0.15s 2022-01-12 16:36:42,497 - octoprint.plugins.pluginmanager - INFO - Loaded plugin notices data from https://plugins.octoprint.org/notices.json 2022-01-12 16:36:42,897 - octoprint.plugins.tracking - INFO - Sent tracking event webui_load, payload: {'browser_name': 'Chrome', 'browser_version': '97.0.4692.71', 'os_name': 'Windows', 'os_version': '10'} 2022-01-12 16:47:28,077 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2022-01-12 16:47:37,417 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 1809, 'printer_state': 'OFFLINE'} 2022-01-12 17:02:28,078 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2022-01-12 17:02:37,387 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 2709, 'printer_state': 'OFFLINE'} 2022-01-12 16:49:34,301 - octoprint.startup - INFO - ****************************************************************************** 2022-01-12 16:49:34,304 - octoprint.startup - INFO - Starting OctoPrint 1.7.2 2022-01-12 16:49:34,307 - octoprint.startup - INFO - ****************************************************************************** 2022-01-12 16:49:39,063 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity changed from offline to online 2022-01-12 16:49:39,064 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: online 2022-01-12 16:49:39,064 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 1.1.1.1:53 is working 2022-01-12 16:49:39,065 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is working 2022-01-12 16:49:39,308 - octoprint.startup - INFO - Blacklist processing done, adding 3 blacklisted plugin versions: roomtemp (any), GcodeEditor (>=0.1.1,<=0.2.8), gcodeleveling (>=0.1.0,<=0.1.1) 2022-01-12 16:49:39,309 - octoprint.plugin.core - WARNING - Invalid version requirement >=0.1.1,<=0.2.8 for blacklist entry GcodeEditor, ignoring 2022-01-12 16:49:39,310 - octoprint.plugin.core - WARNING - Invalid version requirement >=0.1.0,<=0.1.1 for blacklist entry gcodeleveling, ignoring 2022-01-12 16:49:39,563 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2022-01-12 16:49:41,999 - octoprint.plugin.core - INFO - Found 18 plugin(s) providing 18 mixin implementations, 38 hook handlers 2022-01-12 16:49:42,188 - octoprint.server.heartbeat - INFO - Starting server heartbeat, 900.0s interval 2022-01-12 16:49:42,224 - octoprint.server - INFO - Intermediary server started 2022-01-12 16:49:42,257 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/pi/.octoprint/uploads... 2022-01-12 16:49:42,305 - octoprint.filemanager.storage - INFO - ... file metadata for /home/pi/.octoprint/uploads initialized successfully. 2022-01-12 16:49:42,312 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_SHOW (needs: "Need(method='role', value='plugin_action_command_notification_show')") 2022-01-12 16:49:42,313 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_CLEAR (needs: "Need(method='role', value='plugin_action_command_notification_clear')") 2022-01-12 16:49:42,313 - octoprint.server - INFO - Added new permission from plugin action_command_prompt: PLUGIN_ACTION_COMMAND_PROMPT_INTERACT (needs: "Need(method='role', value='plugin_action_command_prompt_interact')") 2022-01-12 16:49:42,314 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_READ (needs: "Need(method='role', value='plugin_announcements_read')") 2022-01-12 16:49:42,315 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_MANAGE (needs: "Need(method='role', value='plugin_announcements_read'), Need(method='role', value='plugin_announcements_manage')") 2022-01-12 16:49:42,315 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_ADMIN (needs: "Need(method='role', value='plugin_appkeys_admin')") 2022-01-12 16:49:42,316 - octoprint.server - INFO - Added new permission from plugin backup: PLUGIN_BACKUP_ACCESS (needs: "Need(method='role', value='plugin_backup_access')") 2022-01-12 16:49:42,318 - octoprint.server - INFO - Added new permission from plugin firmware_check: PLUGIN_FIRMWARE_CHECK_DISPLAY (needs: "Need(method='role', value='plugin_firmware_check_display')") 2022-01-12 16:49:42,320 - octoprint.server - INFO - Added new permission from plugin logging: PLUGIN_LOGGING_MANAGE (needs: "Need(method='role', value='plugin_logging_manage')") 2022-01-12 16:49:42,323 - octoprint.server - INFO - Added new permission from plugin pi_support: PLUGIN_PI_SUPPORT_STATUS (needs: "Need(method='role', value='plugin_pi_support_check')") 2022-01-12 16:49:42,327 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_MANAGE (needs: "Need(method='role', value='plugin_pluginmanager_manage')") 2022-01-12 16:49:42,329 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_INSTALL (needs: "Need(method='role', value='plugin_pluginmanager_manage'), Need(method='role', value='plugin_pluginmanager_install')") 2022-01-12 16:49:42,336 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CHECK (needs: "Need(method='role', value='plugin_softwareupdate_check')") 2022-01-12 16:49:42,336 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_UPDATE (needs: "Need(method='role', value='plugin_softwareupdate_update')") 2022-01-12 16:49:42,337 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CONFIGURE (needs: "Need(method='role', value='plugin_softwareupdate_configure')") 2022-01-12 16:49:43,677 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip 2022-01-12 16:49:44,649 - octoprint.util.pip - INFO - Version of pip is 20.3.3 2022-01-12 16:49:44,651 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-01-12 16:49:44,652 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-01-12 16:49:44,783 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk 2022-01-12 16:49:44,833 - octoprint.plugin.core - INFO - Initialized 18 plugin implementation(s) 2022-01-12 16:49:44,888 - octoprint.plugin.core - INFO - 18 plugin(s) registered with the system: | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/appkeys | Backup & Restore (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/backup | Core Wizard (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/corewizard | Discovery (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/discovery | Error Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/errortracking | Event Manager (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/eventmanager | File Check (2021.2.23) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_file_check | Firmware Check (2021.10.11) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_firmware_check | GCode Viewer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/gcodeviewer | Logging (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/logging | Pi Support Plugin (2021.10.28) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/pluginmanager | Software Update (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/softwareupdate | Virtual Printer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2022-01-12 16:49:44,927 - octoprint.environment - INFO - Detected environment is Python 3.7.3 under Linux (linux). Details: | hardware: | cores: 4 | freq: 1200.0 | ram: 915722240 | os: | bits: 32 | id: linux | platform: linux | plugins: | pi_support: | model: Raspberry Pi 3 Model B Rev 1.2 | octopi_version: 0.18.0 | throttle_state: '0x0' | python: | pip: 20.3.3 | version: 3.7.3 | virtualenv: /home/pi/oprint 2022-01-12 16:49:44,951 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/webassets... 2022-01-12 16:49:44,972 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-cache... 2022-01-12 16:49:45,984 - octoprint.server - INFO - Shutting down intermediary server... 2022-01-12 16:49:46,243 - octoprint.server - INFO - Intermediary server shut down 2022-01-12 16:49:46,246 - octoprint.events - INFO - Processing startup event, this is our first event 2022-01-12 16:49:46,247 - octoprint.events - INFO - Adding 2 events to queue that were held back before startup event 2022-01-12 16:49:46,247 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue... 2022-01-12 16:49:46,253 - octoprint.server - INFO - Autoconnect on startup is configured, trying to connect to the printer... 2022-01-12 16:49:46,293 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue 2022-01-12 16:49:46,445 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json 2022-01-12 16:49:46,451 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2022-01-12 16:49:47,247 - octoprint.plugins.tracking - INFO - Sent tracking event system_unthrottled, payload: {'throttled_now': False, 'throttled_past': False, 'throttled_mask': 0, 'throttled_voltage_now': False, 'throttled_voltage_past': False, 'throttled_overheat_now': False, 'throttled_overheat_past': False} 2022-01-12 16:49:47,309 - octoprint.server - INFO - Trying to connect to configured serial port None 2022-01-12 16:49:47,644 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2022-01-12 16:49:47,699 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder... 2022-01-12 16:49:47,728 - octoprint.server.util.watchdog - INFO - ... initial scan done. 2022-01-12 16:49:48,184 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 0 port/baudrate candidates: 2022-01-12 16:49:48,184 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Error" 2022-01-12 16:49:48,186 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2022-01-12 16:49:48,444 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2022-01-12 16:49:48,502 - octoprint.plugins.tracking - INFO - Sent tracking event commerror_autodetect, payload: {'commerror_text': 'No more candidates to test, and no working port/baudrate combination detected.'} 2022-01-12 16:49:48,777 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on octopi._http._tcp.local.' for _http._tcp.local. 2022-01-12 16:49:49,711 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on octopi._octoprint._tcp.local.' for _octoprint._tcp.local. 2022-01-12 16:49:49,759 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance on octopi for SSDP 2022-01-12 16:49:49,780 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2022-01-12 16:49:49,786 - octoprint.server - INFO - Listening on http://127.0.0.1:5000 2022-01-12 16:49:49,890 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2022-01-12 16:49:50,938 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip 2022-01-12 16:49:50,945 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-01-12 16:49:50,946 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-01-12 16:49:51,043 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 54.1GB. That is considered sufficient for updating. 2022-01-12 16:49:51,667 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 9, 'printer_state': 'OFFLINE'} 2022-01-12 16:49:51,945 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'http://192.168.178.31/', 'path': '/', 'query_string': 'l10n=de'} 2022-01-12 16:49:51,951 - octoprint.plugins.tracking - INFO - Sent tracking event pong, payload: {'version': '1.7.2', 'os': 'linux', 'bits': 32, 'python': '3.7.3', 'pip': '20.3.3', 'cores': 4, 'freq': 1200.0, 'ram': 915722240, 'pi_model': 'Raspberry Pi 3 Model B Rev 1.2', 'octopi_version': '0.18.0', 'plugins': ''} 2022-01-12 16:49:52,198 - octoprint.plugins.tracking - INFO - Sent tracking event startup, payload: {'version': '1.7.2', 'os': 'linux', 'bits': 32, 'python': '3.7.3', 'pip': '20.3.3', 'cores': 4, 'freq': 1200.0, 'ram': 915722240, 'pi_model': 'Raspberry Pi 3 Model B Rev 1.2', 'octopi_version': '0.18.0'} 2022-01-12 16:49:52,288 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2022-01-13 07:56:06,340 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2022-01-13 07:56:06,667 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 18, 'printer_state': 'OFFLINE'} 2022-01-13 07:56:12,831 - octoprint.server.preemptive_cache - INFO - ... done in 14.54s 2022-01-13 07:58:53,651 - octoprint.server.util.flask - INFO - Passively logging in user Feuer-Fritz from ::ffff:192.168.178.27 2022-01-13 07:58:53,653 - octoprint.access.users - INFO - Logged in user: Feuer-Fritz 2022-01-13 07:58:54,966 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.178.27 2022-01-13 07:58:55,129 - octoprint.server.util.flask - INFO - Passively logging in user Feuer-Fritz from ::ffff:192.168.178.27 2022-01-13 07:58:55,130 - octoprint.access.users - INFO - Logged in user: Feuer-Fritz 2022-01-13 07:58:55,324 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json 2022-01-13 07:58:56,124 - octoprint.server.util.sockjs - INFO - User Feuer-Fritz logged in on the socket from client ::ffff:192.168.178.27 2022-01-13 07:58:56,846 - octoprint.plugins.pluginmanager - INFO - Loaded plugin notices data from https://plugins.octoprint.org/notices.json 2022-01-13 07:58:57,322 - octoprint.plugins.tracking - INFO - Sent tracking event webui_load, payload: {'browser_name': 'Chrome', 'browser_version': '97.0.4692.71', 'os_name': 'Windows', 'os_version': '10'} 2022-01-13 07:59:01,238 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2022-01-13 07:59:01,280 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 7 port/baudrate candidates: /dev/ttyUSB0@115200, /dev/ttyUSB0@250000, /dev/ttyUSB0@230400, /dev/ttyUSB0@57600, /dev/ttyUSB0@38400, /dev/ttyUSB0@19200, /dev/ttyUSB0@9600 2022-01-13 07:59:01,281 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200 2022-01-13 07:59:01,282 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200 2022-01-13 07:59:01,310 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-13 07:59:01,314 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-13 07:59:04,305 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2022-01-13 07:59:04,315 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-13 07:59:06,656 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2022-01-13 07:59:06,664 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-13 07:59:08,668 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 250000 2022-01-13 07:59:08,676 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-13 07:59:08,688 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-13 07:59:08,693 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Operational" 2022-01-13 07:59:08,751 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-13 07:59:08,782 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin 1.1.9 (Github, davidramiro) MARLIN-AI3M_VERSION:v1.4.6" 2022-01-13 07:59:08,839 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting 2022-01-13 07:59:08,975 - octoprint.util.comm - INFO - Firmware states that it supports emergency GCODEs to be sent without waiting for an acknowledgement first 2022-01-13 07:59:08,981 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {'firmware_name': 'Marlin 1.1.9 (Github, davidramiro) MARLIN-AI3M_VERSION:v1.4.6', 'printer_port': 'AUTO', 'printer_baudrate': 0} 2022-01-13 07:59:31,212 - octoprint.filemanager.analysis - INFO - Starting analysis of local:02erflat.gcode 2022-01-13 07:59:31,213 - octoprint.filemanager.analysis - INFO - Invoking analysis command: /home/pi/oprint/bin/python3 -m octoprint analysis gcode --speed-x=6000 --speed-y=6000 --max-t=10 --throttle=0.0 --throttle-lines=100 --bed-z=0.0 /home/pi/.octoprint/uploads/02erflat.gcode 2022-01-13 07:59:33,245 - octoprint.filemanager.analysis - INFO - Analysis of entry local:02erflat.gcode finished, needed 2.03s 2022-01-13 07:59:38,916 - octoprint.printer.standard.job - INFO - Print job selected - origin: local, path: 02erflat.gcode, owner: Feuer-Fritz, user: Feuer-Fritz 2022-01-13 07:59:38,943 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting" 2022-01-13 07:59:38,955 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: 02erflat.gcode, owner: Feuer-Fritz, user: Feuer-Fritz 2022-01-13 07:59:38,996 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-13 07:59:39,254 - octoprint.plugins.tracking - INFO - Sent tracking event print_started, payload: {'origin': 'local', 'file': 'e3774c655c589fe6bf646476712465e02bcac80b'} 2022-01-13 07:59:41,122 - octoprint.util.comm - INFO - Printer seems to support the busy protocol, will adjust timeouts and set busy interval accordingly 2022-01-13 08:00:39,235 - octoprint.util.comm - INFO - Telling the printer to set the busy interval to our "communicationBusy" timeout - 1s = 2s 2022-01-13 08:01:01,013 - octoprint.util.comm - WARNING - Received an error from the printer's firmware: Failed to enable Bed Leveling | Last lines in terminal: | Recv: T:18.53 /0.00 B:19.34 /0.00 @:0 B@:0 | Recv: echo:busy: processing | Recv: T:18.62 /0.00 B:19.41 /0.00 @:0 B@:0 | Recv: echo:busy: processing | Recv: T:18.48 /0.00 B:19.34 /0.00 @:0 B@:0 | Recv: echo:busy: processing | Recv: T:18.57 /0.00 B:19.34 /0.00 @:0 B@:0 | Recv: echo:busy: processing | Recv: T:18.62 /0.00 B:19.26 /0.00 @:0 B@:0 | Recv: echo:busy: processing | Recv: T:18.62 /0.00 B:19.41 /0.00 @:0 B@:0 | Recv: echo:busy: processing | Recv: T:18.66 /0.00 B:19.26 /0.00 @:0 B@:0 | Recv: echo:busy: processing | Recv: T:18.53 /0.00 B:19.30 /0.00 @:0 B@:0 | Recv: echo:busy: processing | Recv: X:-5.00 Y:0.00 Z:0.00 E:0.00 Count X:-404 Y:0 Z:0 | Recv: ok | Send: N13 M420 S1*85 | Recv: Error:Failed to enable Bed Leveling 2022-01-13 08:01:01,013 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Error" 2022-01-13 08:01:01,015 - octoprint.util.comm - INFO - Force-sending M112 to the printer 2022-01-13 08:01:01,042 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2022-01-13 08:01:01,143 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2022-01-13 08:01:01,319 - octoprint.plugins.tracking - INFO - Sent tracking event commerror_firmware, payload: {'commerror_text': 'Failed to enable Bed Leveling'} 2022-01-13 08:11:06,343 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2022-01-13 08:11:06,747 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 918, 'printer_state': 'OFFLINE'} 2022-01-13 08:15:22,223 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Opening serial connection" 2022-01-13 08:15:22,234 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 250000 2022-01-13 08:15:22,285 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial connection" to "Connecting" 2022-01-13 08:15:22,290 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-13 08:15:23,202 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-13 08:15:23,551 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-13 08:15:23,554 - octoprint.util.comm - INFO - Changing monitoring state from "Connecting" to "Operational" 2022-01-13 08:15:23,600 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-13 08:15:23,633 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin 1.1.9 (Github, davidramiro) MARLIN-AI3M_VERSION:v1.4.6" 2022-01-13 08:15:23,712 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting 2022-01-13 08:15:23,802 - octoprint.util.comm - INFO - Firmware states that it supports emergency GCODEs to be sent without waiting for an acknowledgement first 2022-01-13 08:15:23,891 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {'firmware_name': 'Marlin 1.1.9 (Github, davidramiro) MARLIN-AI3M_VERSION:v1.4.6', 'printer_port': '/dev/ttyUSB0', 'printer_baudrate': 250000} 2022-01-13 08:15:31,848 - octoprint.printer.standard.job - INFO - Print job selected - origin: local, path: 02erflat.gcode, owner: Feuer-Fritz, user: Feuer-Fritz 2022-01-13 08:15:31,875 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting" 2022-01-13 08:15:31,887 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: 02erflat.gcode, owner: Feuer-Fritz, user: Feuer-Fritz 2022-01-13 08:15:31,902 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-13 08:15:32,141 - octoprint.plugins.tracking - INFO - Sent tracking event print_started, payload: {'origin': 'local', 'file': 'e3774c655c589fe6bf646476712465e02bcac80b'} 2022-01-13 08:15:34,038 - octoprint.util.comm - INFO - Printer seems to support the busy protocol, will adjust timeouts and set busy interval accordingly 2022-01-13 08:16:32,136 - octoprint.util.comm - INFO - Telling the printer to set the busy interval to our "communicationBusy" timeout - 1s = 2s 2022-01-13 08:16:41,609 - octoprint.util.comm - WARNING - Received an error from the printer's firmware: Failed to enable Bed Leveling | Last lines in terminal: | Recv: ok | Send: N9 M190 S{material_bed_temperature}*83 | Recv: ok | Send: N10 M109 S{material_print_temperature}*121 | Recv: ok | Send: N11 M300 S1000 P500*39 | Recv: ok | Send: N12 G28 X0 Y10 Z0*90 | Recv: T:19.60 /0.00 B:25.11 /0.00 @:0 B@:0 | Recv: echo:busy: processing | Recv: T:19.51 /0.00 B:24.96 /0.00 @:0 B@:0 | Recv: echo:busy: processing | Recv: T:19.55 /0.00 B:24.96 /0.00 @:0 B@:0 | Recv: echo:busy: processing | Recv: T:19.42 /0.00 B:24.96 /0.00 @:0 B@:0 | Recv: echo:busy: processing | Recv: X:-5.00 Y:0.00 Z:0.00 E:0.00 Count X:-404 Y:0 Z:0 | Recv: ok | Send: N13 M420 S1*85 | Recv: Error:Failed to enable Bed Leveling 2022-01-13 08:16:41,610 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Error" 2022-01-13 08:16:41,612 - octoprint.util.comm - INFO - Force-sending M112 to the printer 2022-01-13 08:16:41,630 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2022-01-13 08:16:41,785 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2022-01-13 08:16:41,937 - octoprint.plugins.tracking - INFO - Sent tracking event commerror_firmware, payload: {'commerror_text': 'Failed to enable Bed Leveling'} 2022-01-13 08:16:52,890 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Opening serial connection" 2022-01-13 08:16:52,892 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200 2022-01-13 08:16:52,927 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial connection" to "Connecting" 2022-01-13 08:16:52,932 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-13 08:17:20,740 - octoprint.util.comm - INFO - Changing monitoring state from "Connecting" to "Offline" 2022-01-13 08:17:20,776 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2022-01-13 08:17:24,974 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Opening serial connection" 2022-01-13 08:17:24,976 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 230400 2022-01-13 08:17:25,012 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial connection" to "Connecting" 2022-01-13 08:17:25,024 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-13 08:17:32,333 - octoprint.util.comm - INFO - Changing monitoring state from "Connecting" to "Offline" 2022-01-13 08:17:32,368 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2022-01-13 08:17:36,354 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Opening serial connection" 2022-01-13 08:17:36,368 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 250000 2022-01-13 08:17:36,401 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial connection" to "Connecting" 2022-01-13 08:17:36,417 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-13 08:17:36,421 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-13 08:17:37,309 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-13 08:17:37,659 - octoprint.util.comm - INFO - Changing monitoring state from "Connecting" to "Operational" 2022-01-13 08:17:37,682 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-13 08:17:37,720 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin 1.1.9 (Github, davidramiro) MARLIN-AI3M_VERSION:v1.4.6" 2022-01-13 08:17:37,772 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting 2022-01-13 08:17:37,826 - octoprint.util.comm - INFO - Firmware states that it supports emergency GCODEs to be sent without waiting for an acknowledgement first 2022-01-13 08:17:39,731 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {'firmware_name': 'Marlin 1.1.9 (Github, davidramiro) MARLIN-AI3M_VERSION:v1.4.6', 'printer_port': '/dev/ttyUSB0', 'printer_baudrate': 250000} 2022-01-13 08:17:59,629 - octoprint.printer.standard.job - INFO - Print job selected - origin: local, path: 02erflat.gcode, owner: Feuer-Fritz, user: Feuer-Fritz 2022-01-13 08:18:02,471 - octoprint.util.comm - INFO - Starting job on behalf of user Feuer-Fritz 2022-01-13 08:18:02,474 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting" 2022-01-13 08:18:02,493 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: 02erflat.gcode, owner: Feuer-Fritz, user: Feuer-Fritz 2022-01-13 08:18:02,517 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-13 08:18:02,945 - octoprint.plugins.tracking - INFO - Sent tracking event print_started, payload: {'origin': 'local', 'file': 'e3774c655c589fe6bf646476712465e02bcac80b'} 2022-01-13 08:18:04,627 - octoprint.util.comm - INFO - Printer seems to support the busy protocol, will adjust timeouts and set busy interval accordingly 2022-01-13 08:19:02,733 - octoprint.util.comm - INFO - Telling the printer to set the busy interval to our "communicationBusy" timeout - 1s = 2s 2022-01-13 08:19:09,672 - octoprint.util.comm - WARNING - Received an error from the printer's firmware: Failed to enable Bed Leveling | Last lines in terminal: | Recv: ok | Send: N8 M104 S{material_print_temperature}*77 | Recv: ok | Send: N9 M190 S{material_bed_temperature}*83 | Recv: ok | Send: N10 M109 S{material_print_temperature}*121 | Recv: ok | Send: N11 M300 S1000 P500*39 | Recv: ok | Send: N12 G28 X0 Y10 Z0*90 | Recv: T:19.91 /0.00 B:23.63 /0.00 @:0 B@:0 | Recv: echo:busy: processing | Recv: T:19.82 /0.00 B:23.67 /0.00 @:0 B@:0 | Recv: echo:busy: processing | Recv: T:19.78 /0.00 B:23.59 /0.00 @:0 B@:0 | Recv: echo:busy: processing | Recv: X:-5.00 Y:0.00 Z:0.00 E:0.00 Count X:-404 Y:0 Z:0 | Recv: ok | Send: N13 M420 S1*85 | Recv: Error:Failed to enable Bed Leveling 2022-01-13 08:19:09,672 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Error" 2022-01-13 08:19:09,673 - octoprint.util.comm - INFO - Force-sending M112 to the printer 2022-01-13 08:19:09,682 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2022-01-13 08:19:09,786 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2022-01-13 08:19:09,923 - octoprint.plugins.tracking - INFO - Sent tracking event commerror_firmware, payload: {'commerror_text': 'Failed to enable Bed Leveling'} 2022-01-13 08:19:45,518 - octoprint.server.api.system - INFO - Performing command for core:restart_safe: sudo service octoprint restart 2022-01-13 08:19:45,766 - octoprint.server - INFO - Shutting down... 2022-01-13 08:19:45,773 - octoprint.server.api.system - WARNING - Command for core:restart_safe failed with return code -15: ! STDOUT: ! STDERR: 2022-01-13 08:19:46,765 - octoprint.server - INFO - Calling on_shutdown on plugins 2022-01-13 08:19:46,768 - octoprint.events - INFO - Processing shutdown event, this will be our last event 2022-01-13 08:19:46,799 - octoprint.events - INFO - Event loop shut down 2022-01-13 08:19:47,017 - octoprint.plugins.tracking - INFO - Sent tracking event shutdown, payload: {} 2022-01-13 08:19:47,019 - octoprint.server - INFO - Goodbye! 2022-01-13 08:19:49,502 - octoprint.startup - INFO - ****************************************************************************** 2022-01-13 08:19:49,506 - octoprint.startup - INFO - Starting OctoPrint 1.7.2 2022-01-13 08:19:49,507 - octoprint.startup - INFO - Starting in SAFE MODE. Third party plugins will be disabled! 2022-01-13 08:19:49,508 - octoprint.startup - INFO - Reason for safe mode: setting in config.yaml 2022-01-13 08:19:49,509 - octoprint.startup - INFO - ****************************************************************************** 2022-01-13 08:19:50,098 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity changed from offline to online 2022-01-13 08:19:50,215 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: online 2022-01-13 08:19:50,216 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 1.1.1.1:53 is working 2022-01-13 08:19:50,216 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is working 2022-01-13 08:19:50,415 - octoprint.startup - INFO - Blacklist processing done, adding 3 blacklisted plugin versions: roomtemp (any), GcodeEditor (>=0.1.1,<=0.2.8), gcodeleveling (>=0.1.0,<=0.1.1) 2022-01-13 08:19:50,416 - octoprint.plugin.core - WARNING - Invalid version requirement >=0.1.1,<=0.2.8 for blacklist entry GcodeEditor, ignoring 2022-01-13 08:19:50,416 - octoprint.plugin.core - WARNING - Invalid version requirement >=0.1.0,<=0.1.1 for blacklist entry gcodeleveling, ignoring 2022-01-13 08:19:50,472 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2022-01-13 08:19:52,159 - octoprint.plugin.core - INFO - Found 18 plugin(s) providing 18 mixin implementations, 38 hook handlers 2022-01-13 08:19:52,322 - octoprint.server.heartbeat - INFO - Starting server heartbeat, 900.0s interval 2022-01-13 08:19:52,333 - octoprint.server - INFO - Intermediary server started 2022-01-13 08:19:52,365 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/pi/.octoprint/uploads... 2022-01-13 08:19:52,399 - octoprint.filemanager.storage - INFO - ... file metadata for /home/pi/.octoprint/uploads initialized successfully. 2022-01-13 08:19:52,407 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_SHOW (needs: "Need(method='role', value='plugin_action_command_notification_show')") 2022-01-13 08:19:52,407 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_CLEAR (needs: "Need(method='role', value='plugin_action_command_notification_clear')") 2022-01-13 08:19:52,408 - octoprint.server - INFO - Added new permission from plugin action_command_prompt: PLUGIN_ACTION_COMMAND_PROMPT_INTERACT (needs: "Need(method='role', value='plugin_action_command_prompt_interact')") 2022-01-13 08:19:52,409 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_READ (needs: "Need(method='role', value='plugin_announcements_read')") 2022-01-13 08:19:52,409 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_MANAGE (needs: "Need(method='role', value='plugin_announcements_manage'), Need(method='role', value='plugin_announcements_read')") 2022-01-13 08:19:52,410 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_ADMIN (needs: "Need(method='role', value='plugin_appkeys_admin')") 2022-01-13 08:19:52,411 - octoprint.server - INFO - Added new permission from plugin backup: PLUGIN_BACKUP_ACCESS (needs: "Need(method='role', value='plugin_backup_access')") 2022-01-13 08:19:52,414 - octoprint.server - INFO - Added new permission from plugin firmware_check: PLUGIN_FIRMWARE_CHECK_DISPLAY (needs: "Need(method='role', value='plugin_firmware_check_display')") 2022-01-13 08:19:52,418 - octoprint.server - INFO - Added new permission from plugin logging: PLUGIN_LOGGING_MANAGE (needs: "Need(method='role', value='plugin_logging_manage')") 2022-01-13 08:19:52,420 - octoprint.server - INFO - Added new permission from plugin pi_support: PLUGIN_PI_SUPPORT_STATUS (needs: "Need(method='role', value='plugin_pi_support_check')") 2022-01-13 08:19:52,422 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_MANAGE (needs: "Need(method='role', value='plugin_pluginmanager_manage')") 2022-01-13 08:19:52,424 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_INSTALL (needs: "Need(method='role', value='plugin_pluginmanager_manage'), Need(method='role', value='plugin_pluginmanager_install')") 2022-01-13 08:19:52,428 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CHECK (needs: "Need(method='role', value='plugin_softwareupdate_check')") 2022-01-13 08:19:52,429 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_UPDATE (needs: "Need(method='role', value='plugin_softwareupdate_update')") 2022-01-13 08:19:52,429 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CONFIGURE (needs: "Need(method='role', value='plugin_softwareupdate_configure')") 2022-01-13 08:19:53,584 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip 2022-01-13 08:19:54,582 - octoprint.util.pip - INFO - Version of pip is 20.3.3 2022-01-13 08:19:54,584 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-01-13 08:19:54,585 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-01-13 08:19:54,692 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk 2022-01-13 08:19:54,742 - octoprint.plugin.core - INFO - Initialized 18 plugin implementation(s) 2022-01-13 08:19:54,799 - octoprint.plugin.core - INFO - 18 plugin(s) registered with the system: | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/appkeys | Backup & Restore (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/backup | Core Wizard (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/corewizard | Discovery (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/discovery | Error Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/errortracking | Event Manager (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/eventmanager | File Check (2021.2.23) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_file_check | Firmware Check (2021.10.11) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_firmware_check | GCode Viewer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/gcodeviewer | Logging (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/logging | Pi Support Plugin (2021.10.28) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/pluginmanager | Software Update (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/softwareupdate | Virtual Printer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2022-01-13 08:19:54,837 - octoprint.environment - INFO - Detected environment is Python 3.7.3 under Linux (linux). Details: | hardware: | cores: 4 | freq: 1200.0 | ram: 915722240 | os: | bits: 32 | id: linux | platform: linux | plugins: | pi_support: | model: Raspberry Pi 3 Model B Rev 1.2 | octopi_version: 0.18.0 | throttle_state: '0x0' | python: | pip: 20.3.3 | version: 3.7.3 | virtualenv: /home/pi/oprint 2022-01-13 08:19:54,866 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/webassets... 2022-01-13 08:19:54,890 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-cache... 2022-01-13 08:19:55,837 - octoprint.server - INFO - Shutting down intermediary server... 2022-01-13 08:19:56,304 - octoprint.server - INFO - Intermediary server shut down 2022-01-13 08:19:56,307 - octoprint.events - INFO - Processing startup event, this is our first event 2022-01-13 08:19:56,307 - octoprint.events - INFO - Adding 2 events to queue that were held back before startup event 2022-01-13 08:19:56,308 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue... 2022-01-13 08:19:56,316 - octoprint.server - INFO - Autoconnect on startup is configured, trying to connect to the printer... 2022-01-13 08:19:56,337 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue 2022-01-13 08:19:56,459 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json 2022-01-13 08:19:56,517 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2022-01-13 08:19:57,136 - octoprint.plugins.tracking - INFO - Sent tracking event system_unthrottled, payload: {'throttled_now': False, 'throttled_past': False, 'throttled_mask': 0, 'throttled_voltage_now': False, 'throttled_voltage_past': False, 'throttled_overheat_now': False, 'throttled_overheat_past': False} 2022-01-13 08:19:57,672 - octoprint.server - INFO - Trying to connect to configured serial port None 2022-01-13 08:19:57,867 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2022-01-13 08:19:57,887 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder... 2022-01-13 08:19:57,909 - octoprint.server.util.watchdog - INFO - ... initial scan done. 2022-01-13 08:19:58,025 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 7 port/baudrate candidates: /dev/ttyUSB0@115200, /dev/ttyUSB0@250000, /dev/ttyUSB0@230400, /dev/ttyUSB0@57600, /dev/ttyUSB0@38400, /dev/ttyUSB0@19200, /dev/ttyUSB0@9600 2022-01-13 08:19:58,026 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 115200 2022-01-13 08:19:58,027 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 115200 2022-01-13 08:19:58,114 - octoprint.plugins.announcements - INFO - Loaded channel _important from https://octoprint.org/feeds/important.xml in 0.32s 2022-01-13 08:19:58,131 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-13 08:19:58,167 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-13 08:19:58,731 - octoprint.plugins.announcements - INFO - Loaded channel _releases from https://octoprint.org/feeds/releases.xml in 0.27s 2022-01-13 08:19:58,869 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on octopi._http._tcp.local.' for _http._tcp.local. 2022-01-13 08:19:59,201 - octoprint.plugins.announcements - INFO - Loaded channel _blog from https://octoprint.org/feeds/octoblog.xml in 0.27s 2022-01-13 08:19:59,614 - octoprint.plugins.announcements - INFO - Loaded channel _plugins from https://plugins.octoprint.org/feed.xml in 0.25s 2022-01-13 08:19:59,792 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on octopi._octoprint._tcp.local.' for _octoprint._tcp.local. 2022-01-13 08:19:59,823 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance on octopi for SSDP 2022-01-13 08:19:59,842 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2022-01-13 08:19:59,873 - octoprint.server - INFO - Listening on http://127.0.0.1:5000 2022-01-13 08:19:59,874 - octoprint.server - INFO - Server started successfully in safe mode as requested from config, removing flag 2022-01-13 08:20:00,065 - octoprint.plugins.announcements - INFO - Loaded channel _octopi from https://octoprint.org/feeds/octopi.xml in 0.23s 2022-01-13 08:20:00,132 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.178.27 2022-01-13 08:20:00,158 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2022-01-13 08:20:00,160 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2022-01-13 08:20:00,339 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-13 08:20:00,402 - octoprint.server.util.flask - INFO - Passively logging in user Feuer-Fritz from ::ffff:192.168.178.27 2022-01-13 08:20:00,403 - octoprint.access.users - INFO - Logged in user: Feuer-Fritz 2022-01-13 08:20:00,654 - octoprint.server.util.sockjs - INFO - User Feuer-Fritz logged in on the socket from client ::ffff:192.168.178.27 2022-01-13 08:20:01,246 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip 2022-01-13 08:20:01,256 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-01-13 08:20:01,264 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-01-13 08:20:01,296 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 54.1GB. That is considered sufficient for updating. 2022-01-13 08:20:01,984 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 9, 'printer_state': 'DETECT_SERIAL'} 2022-01-13 08:20:02,217 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2022-01-13 08:20:02,231 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-13 08:20:02,319 - octoprint.plugins.tracking - INFO - Sent tracking event pong, payload: {'version': '1.7.2', 'os': 'linux', 'bits': 32, 'python': '3.7.3', 'pip': '20.3.3', 'cores': 4, 'freq': 1200.0, 'ram': 915722240, 'pi_model': 'Raspberry Pi 3 Model B Rev 1.2', 'octopi_version': '0.18.0', 'plugins': ''} 2022-01-13 08:20:02,510 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'http://192.168.178.31/', 'path': '/', 'query_string': 'l10n=de'} 2022-01-13 08:20:02,617 - octoprint.plugins.tracking - INFO - Sent tracking event startup, payload: {'version': '1.7.2', 'os': 'linux', 'bits': 32, 'python': '3.7.3', 'pip': '20.3.3', 'cores': 4, 'freq': 1200.0, 'ram': 915722240, 'pi_model': 'Raspberry Pi 3 Model B Rev 1.2', 'octopi_version': '0.18.0'} 2022-01-13 08:20:03,948 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2022-01-13 08:20:04,232 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 250000 2022-01-13 08:20:04,238 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-13 08:20:04,299 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-13 08:20:05,568 - octoprint.server.util.flask - INFO - Passively logging in user Feuer-Fritz from ::ffff:192.168.178.27 2022-01-13 08:20:05,569 - octoprint.access.users - INFO - Logged in user: Feuer-Fritz 2022-01-13 08:20:06,305 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2022-01-13 08:20:06,308 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-13 08:20:08,312 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2022-01-13 08:20:08,331 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-13 08:20:10,317 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 230400 2022-01-13 08:20:10,318 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-13 08:20:10,357 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-13 08:20:12,375 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2022-01-13 08:20:12,387 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-13 08:20:14,391 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2022-01-13 08:20:14,437 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-13 08:20:16,432 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 57600 2022-01-13 08:20:16,434 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-13 08:20:16,446 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-13 08:20:18,451 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2022-01-13 08:20:18,463 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-13 08:20:20,463 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2022-01-13 08:20:20,475 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-13 08:20:22,479 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 38400 2022-01-13 08:20:22,482 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-13 08:20:22,513 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-13 08:20:24,507 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2022-01-13 08:20:24,519 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-13 08:20:26,537 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2022-01-13 08:20:26,565 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-13 08:20:28,089 - octoprint.server.preemptive_cache - INFO - ... done in 25.58s 2022-01-13 08:20:28,253 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.178.27 2022-01-13 08:20:28,567 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 19200 2022-01-13 08:20:28,570 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-13 08:20:28,575 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-13 08:20:28,603 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.178.27 2022-01-13 08:20:28,724 - octoprint.server.util.flask - INFO - Passively logging in user Feuer-Fritz from ::ffff:192.168.178.27 2022-01-13 08:20:28,725 - octoprint.access.users - INFO - Logged in user: Feuer-Fritz 2022-01-13 08:20:29,302 - octoprint.server.util.sockjs - INFO - User Feuer-Fritz logged in on the socket from client ::ffff:192.168.178.27 2022-01-13 08:20:30,551 - octoprint.plugins.tracking - INFO - Sent tracking event webui_load, payload: {'browser_name': 'Chrome', 'browser_version': '97.0.4692.71', 'os_name': 'Windows', 'os_version': '10'} 2022-01-13 08:20:30,578 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2022-01-13 08:20:30,590 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-13 08:20:32,593 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2022-01-13 08:20:32,610 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-13 08:20:34,611 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyUSB0, baudrate 9600 2022-01-13 08:20:34,614 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-01-13 08:20:34,623 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-13 08:20:36,626 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #2 with timeout 2.0s 2022-01-13 08:20:36,637 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-13 08:20:38,635 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #3 with timeout 2.0s 2022-01-13 08:20:38,650 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-13 08:20:40,651 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Error" 2022-01-13 08:20:40,683 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2022-01-13 08:20:40,800 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2022-01-13 08:20:40,996 - octoprint.plugins.tracking - INFO - Sent tracking event commerror_autodetect, payload: {'commerror_text': 'No more candidates to test, and no working port/baudrate combination detected.'} 2022-01-13 08:23:44,804 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Opening serial connection" 2022-01-13 08:23:44,806 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 19200 2022-01-13 08:23:44,850 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial connection" to "Connecting" 2022-01-13 08:23:44,862 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-13 08:23:53,806 - octoprint.util.comm - INFO - Changing monitoring state from "Connecting" to "Offline" 2022-01-13 08:23:53,863 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2022-01-13 08:23:58,684 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Opening serial connection" 2022-01-13 08:23:58,690 - octoprint.util.comm - INFO - Connecting to port /dev/ttyUSB0, baudrate 250000 2022-01-13 08:23:58,738 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial connection" to "Connecting" 2022-01-13 08:23:58,744 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-13 08:23:59,653 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-13 08:24:00,006 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-13 08:24:00,012 - octoprint.util.comm - INFO - Changing monitoring state from "Connecting" to "Operational" 2022-01-13 08:24:00,087 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-13 08:24:00,127 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin 1.1.9 (Github, davidramiro) MARLIN-AI3M_VERSION:v1.4.6" 2022-01-13 08:24:00,183 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting 2022-01-13 08:24:00,315 - octoprint.util.comm - INFO - Firmware states that it supports emergency GCODEs to be sent without waiting for an acknowledgement first 2022-01-13 08:24:00,400 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {'firmware_name': 'Marlin 1.1.9 (Github, davidramiro) MARLIN-AI3M_VERSION:v1.4.6', 'printer_port': '/dev/ttyUSB0', 'printer_baudrate': 250000} 2022-01-13 08:24:02,510 - octoprint.printer.standard.job - INFO - Print job selected - origin: local, path: 02erflat.gcode, owner: Feuer-Fritz, user: Feuer-Fritz 2022-01-13 08:24:03,627 - octoprint.util.comm - INFO - Starting job on behalf of user Feuer-Fritz 2022-01-13 08:24:03,639 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting" 2022-01-13 08:24:03,652 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: 02erflat.gcode, owner: Feuer-Fritz, user: Feuer-Fritz 2022-01-13 08:24:03,687 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-01-13 08:24:03,953 - octoprint.plugins.tracking - INFO - Sent tracking event print_started, payload: {'origin': 'local', 'file': 'e3774c655c589fe6bf646476712465e02bcac80b'} 2022-01-13 08:24:05,788 - octoprint.util.comm - INFO - Printer seems to support the busy protocol, will adjust timeouts and set busy interval accordingly 2022-01-13 08:25:03,908 - octoprint.util.comm - INFO - Telling the printer to set the busy interval to our "communicationBusy" timeout - 1s = 2s 2022-01-13 08:25:10,887 - octoprint.util.comm - WARNING - Received an error from the printer's firmware: Failed to enable Bed Leveling | Last lines in terminal: | Send: N8 M104 S{material_print_temperature}*77 | Recv: ok | Send: N9 M190 S{material_bed_temperature}*83 | Recv: ok | Send: N10 M109 S{material_print_temperature}*121 | Recv: ok | Send: N11 M300 S1000 P500*39 | Recv: ok | Send: N12 G28 X0 Y10 Z0*90 | Recv: T:20.12 /0.00 B:21.60 /0.00 @:0 B@:0 | Recv: echo:busy: processing | Recv: T:20.00 /0.00 B:21.76 /0.00 @:0 B@:0 | Recv: echo:busy: processing | Recv: T:19.96 /0.00 B:21.60 /0.00 @:0 B@:0 | Recv: echo:busy: processing | Recv: T:19.96 /0.00 B:21.52 /0.00 @:0 B@:0 | Recv: X:-5.00 Y:0.00 Z:0.00 E:0.00 Count X:-404 Y:0 Z:0 | Recv: ok | Send: N13 M420 S1*85 | Recv: Error:Failed to enable Bed Leveling 2022-01-13 08:25:10,888 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Error" 2022-01-13 08:25:10,891 - octoprint.util.comm - INFO - Force-sending M112 to the printer 2022-01-13 08:25:10,944 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2022-01-13 08:25:11,047 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2022-01-13 08:25:11,178 - octoprint.plugins.tracking - INFO - Sent tracking event commerror_firmware, payload: {'commerror_text': 'Failed to enable Bed Leveling'}