2020-05-21 23:55:05,067 - Changing monitoring state from "Offline" to "Detecting serial port"
2020-05-21 23:55:05,434 - Serial port list: [u'/dev/ttyUSB0']
2020-05-21 23:55:05,471 - Connecting to: /dev/ttyUSB0
2020-05-21 23:55:05,565 - Changing monitoring state from "Detecting serial port" to "Opening serial port"
2020-05-21 23:55:05,646 - Connected to: Serial<id=0xa938a9b0, open=True>(port='/dev/ttyUSB0', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=10.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
2020-05-21 23:55:05,657 - Starting baud rate detection...
2020-05-21 23:55:05,658 - Changing monitoring state from "Opening serial port" to "Detecting baudrate"
2020-05-21 23:55:07,029 - Unexpected error while setting baudrate 115200: SerialException: 'Could not configure port: (5, 'Input/output error')' @ comm.py:_perform_baudrate_detection_step:2332
2020-05-21 23:55:07,197 - Unexpected error while reading serial port, please consult octoprint.log for details: IOError: '[Errno 5] Input/output error' @ comm.py:_readline:2823
2020-05-21 23:55:07,319 - Changing monitoring state from "Detecting baudrate" to "Offline (Error: IOError: '[Errno 5] Input/output error' @ comm.py:_readline:2823)"
2020-05-21 23:55:07,651 - Connection closed, closing down monitor
2020-05-21 23:55:25,336 - Connecting to: /dev/ttyUSB1
2020-05-21 23:55:25,468 - Changing monitoring state from "Offline" to "Opening serial port"
2020-05-21 23:55:25,596 - Connected to: Serial<id=0xa93f3c70, open=True>(port='/dev/ttyUSB1', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=10.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
2020-05-21 23:55:25,610 - Starting baud rate detection...
2020-05-21 23:55:25,611 - Changing monitoring state from "Opening serial port" to "Detecting baudrate"
2020-05-21 23:55:26,725 - Unexpected error while setting baudrate 115200: SerialException: 'Could not configure port: (5, 'Input/output error')' @ comm.py:_perform_baudrate_detection_step:2332
2020-05-21 23:55:26,844 - Unexpected error while reading serial port, please consult octoprint.log for details: IOError: '[Errno 5] Input/output error' @ comm.py:_readline:2823
2020-05-21 23:55:26,917 - Changing monitoring state from "Detecting baudrate" to "Offline (Error: IOError: '[Errno 5] Input/output error' @ comm.py:_readline:2823)"
2020-05-21 23:55:27,060 - Connection closed, closing down monitor
2020-05-21 23:55:40,006 - Changing monitoring state from "Offline" to "Detecting serial port"
2020-05-21 23:55:40,472 - Serial port list: [u'/dev/ttyUSB0']
2020-05-21 23:55:40,487 - Connecting to: /dev/ttyUSB0
2020-05-21 23:55:40,617 - Changing monitoring state from "Detecting serial port" to "Opening serial port"
2020-05-21 23:55:40,747 - Connected to: Serial<id=0xaf9177f0, open=True>(port='/dev/ttyUSB0', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=10.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
2020-05-21 23:55:40,757 - Starting baud rate detection...
2020-05-21 23:55:40,766 - Changing monitoring state from "Opening serial port" to "Detecting baudrate"
2020-05-21 23:55:41,858 - Trying baudrate: 115200
2020-05-21 23:55:41,910 - Recv: start
2020-05-21 23:55:41,956 - Send: N0 M110 N0*125
2020-05-21 23:55:41,989 - Changing monitoring state from "Detecting baudrate" to "Operational"
2020-05-21 23:55:42,157 - Recv: echo: External Reset
2020-05-21 23:55:42,172 - Recv: Marlin 1.1.6.2
2020-05-21 23:55:42,160 - Send: N0 M110 N0*125
2020-05-21 23:55:42,211 - Recv: 
2020-05-21 23:55:42,229 - Recv: echo: Last Updated: 2018-11-28 | Author: (Ender-3)
2020-05-21 23:55:42,249 - Recv: echo:Compiled: May 24 2019
2020-05-21 23:55:42,272 - Recv: echo: Free Memory: 10078  PlannerBufferBytes: 1232
2020-05-21 23:55:44,017 - Unexpected error while reading serial port, please consult octoprint.log for details: SerialException: 'device reports readiness to read but returned no data (device disconnected or multiple access on port?)' @ comm.py:_readline:2823
2020-05-21 23:55:44,070 - Please see https://faq.octoprint.org/serialerror for possible reasons of this.
2020-05-21 23:55:44,226 - Changing monitoring state from "Operational" to "Offline (Error: SerialException: 'device reports readiness to read but returned no data (device disconnected or multiple access on port?)' @ comm.py:_readline:2823)"
2020-05-21 23:55:44,350 - Connection closed, closing down monitor
2020-05-21 23:55:55,375 - Changing monitoring state from "Offline" to "Detecting serial port"
2020-05-21 23:55:55,808 - Serial port list: [u'/dev/ttyUSB0']
2020-05-21 23:55:55,826 - Connecting to: /dev/ttyUSB0
2020-05-21 23:55:55,969 - Changing monitoring state from "Detecting serial port" to "Opening serial port"
2020-05-21 23:55:56,054 - Connected to: Serial<id=0xa9373af0, open=True>(port='/dev/ttyUSB0', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=10.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
2020-05-21 23:55:56,071 - Starting baud rate detection...
2020-05-21 23:55:56,079 - Changing monitoring state from "Opening serial port" to "Detecting baudrate"
2020-05-21 23:55:57,243 - Unexpected error while setting baudrate 115200: SerialException: 'Could not configure port: (5, 'Input/output error')' @ comm.py:_perform_baudrate_detection_step:2332
2020-05-21 23:55:57,690 - Unexpected error while reading serial port, please consult octoprint.log for details: IOError: '[Errno 5] Input/output error' @ comm.py:_readline:2823
2020-05-21 23:55:57,850 - Changing monitoring state from "Detecting baudrate" to "Offline (Error: IOError: '[Errno 5] Input/output error' @ comm.py:_readline:2823)"
2020-05-21 23:55:57,961 - Connection closed, closing down monitor
2020-05-21 23:58:19,915 - Connecting to: /dev/ttyUSB1
2020-05-21 23:58:20,016 - Changing monitoring state from "Offline" to "Opening serial port"
2020-05-21 23:58:20,095 - Connected to: Serial<id=0xa93771b0, open=True>(port='/dev/ttyUSB1', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=10.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
2020-05-21 23:58:20,127 - Starting baud rate detection...
2020-05-21 23:58:20,128 - Changing monitoring state from "Opening serial port" to "Detecting baudrate"
2020-05-21 23:58:21,456 - Unexpected error while setting baudrate 115200: SerialException: 'Could not configure port: (5, 'Input/output error')' @ comm.py:_perform_baudrate_detection_step:2332
2020-05-21 23:58:21,546 - Unexpected error while reading serial port, please consult octoprint.log for details: IOError: '[Errno 5] Input/output error' @ comm.py:_readline:2823
2020-05-21 23:58:21,582 - Changing monitoring state from "Detecting baudrate" to "Offline (Error: IOError: '[Errno 5] Input/output error' @ comm.py:_readline:2823)"
2020-05-21 23:58:21,630 - Connection closed, closing down monitor
2020-05-21 23:58:27,526 - Changing monitoring state from "Offline" to "Detecting serial port"
2020-05-21 23:58:28,086 - Serial port list: [u'/dev/ttyUSB0']
2020-05-21 23:58:28,116 - Connecting to: /dev/ttyUSB0
2020-05-21 23:58:28,263 - Changing monitoring state from "Detecting serial port" to "Opening serial port"
2020-05-21 23:58:28,364 - Connected to: Serial<id=0xa92dd090, open=True>(port='/dev/ttyUSB0', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=10.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
2020-05-21 23:58:28,387 - Starting baud rate detection...
2020-05-21 23:58:28,389 - Changing monitoring state from "Opening serial port" to "Detecting baudrate"
2020-05-21 23:58:29,567 - Unexpected error while setting baudrate 115200: SerialException: 'Could not configure port: (5, 'Input/output error')' @ comm.py:_perform_baudrate_detection_step:2332
2020-05-21 23:58:29,824 - Unexpected error while reading serial port, please consult octoprint.log for details: IOError: '[Errno 5] Input/output error' @ comm.py:_readline:2823
2020-05-21 23:58:30,066 - Changing monitoring state from "Detecting baudrate" to "Offline (Error: IOError: '[Errno 5] Input/output error' @ comm.py:_readline:2823)"
2020-05-21 23:58:30,237 - Connection closed, closing down monitor
2020-05-21 23:59:17,956 - Connecting to: /dev/ttyUSB1
2020-05-21 23:59:18,107 - Changing monitoring state from "Offline" to "Opening serial port"
2020-05-21 23:59:18,222 - Connected to: Serial<id=0xa93f3b10, open=True>(port='/dev/ttyUSB1', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=10.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
2020-05-21 23:59:18,245 - Changing monitoring state from "Opening serial port" to "Connecting"
2020-05-21 23:59:18,368 - Send: N0 M110 N0*125
2020-05-21 23:59:18,372 - Recv: start
2020-05-21 23:59:18,522 - Send: N0 M110 N0*125
2020-05-21 23:59:18,748 - Unexpected error while writing to serial port: SerialException: 'write failed: [Errno 5] Input/output error' @ comm.py:_do_send_without_checksum:3490
2020-05-21 23:59:18,568 - Unexpected error while reading serial port, please consult octoprint.log for details: IOError: '[Errno 5] Input/output error' @ comm.py:_readline:2823
2020-05-21 23:59:18,898 - Please see https://faq.octoprint.org/serialerror for possible reasons of this.
2020-05-21 23:59:18,927 - Changing monitoring state from "Connecting" to "Offline (Error: IOError: '[Errno 5] Input/output error' @ comm.py:_readline:2823)"
2020-05-21 23:59:19,169 - Connection closed, closing down monitor
2020-05-21 23:59:25,616 - Changing monitoring state from "Offline" to "Detecting serial port"
2020-05-21 23:59:26,080 - Serial port list: [u'/dev/ttyUSB0']
2020-05-21 23:59:26,106 - Connecting to: /dev/ttyUSB0
2020-05-21 23:59:26,347 - Changing monitoring state from "Detecting serial port" to "Opening serial port"
2020-05-21 23:59:26,468 - Connected to: Serial<id=0xa92ebf50, open=True>(port='/dev/ttyUSB0', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=10.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
2020-05-21 23:59:26,506 - Changing monitoring state from "Opening serial port" to "Connecting"
2020-05-21 23:59:26,626 - Send: N0 M110 N0*125
2020-05-21 23:59:26,664 - Recv: start
2020-05-21 23:59:26,739 - Send: N0 M110 N0*125
2020-05-21 23:59:26,775 - Recv: echo: External Reset
2020-05-21 23:59:26,820 - Send: N0 M110 N0*125
2020-05-21 23:59:26,828 - Recv: Marliho:Compiled: May 24 2019
2020-05-21 23:59:26,861 - Recv: echo: Free Memory: 10078  PlannerBufferBytes: 1232
2020-05-21 23:59:28,027 - Unexpected error while reading serial port, please consult octoprint.log for details: SerialException: 'device reports readiness to read but returned no data (device disconnected or multiple access on port?)' @ comm.py:_readline:2823
2020-05-21 23:59:28,055 - Please see https://faq.octoprint.org/serialerror for possible reasons of this.
2020-05-21 23:59:28,097 - Changing monitoring state from "Connecting" to "Offline (Error: SerialException: 'device reports readiness to read but returned no data (device disconnected or multiple access on port?)' @ comm.py:_readline:2823)"
2020-05-21 23:59:28,185 - Connection closed, closing down monitor
2020-05-22 00:04:02,796 - Connecting to: /dev/ttyUSB0
2020-05-22 00:04:02,863 - Changing monitoring state from "Offline" to "Opening serial port"
2020-05-22 00:04:02,949 - Connected to: Serial<id=0xa928f450, open=True>(port='/dev/ttyUSB0', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=10.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
2020-05-22 00:04:02,987 - Changing monitoring state from "Opening serial port" to "Connecting"
2020-05-22 00:04:03,121 - Send: N0 M110 N0*125
2020-05-22 00:04:03,131 - Recv: start
2020-05-22 00:04:03,168 - Recv: echo: External Reset
2020-05-22 00:04:03,192 - Recv: Marlin 1.1.6.2
2020-05-22 00:04:03,188 - Send: N0 M110 N0*125
2020-05-22 00:04:03,233 - Recv: 
2020-05-22 00:04:03,270 - Recv: echo: Last Updated: 2018-11-28 | Author: (Ender-3)
2020-05-22 00:04:03,279 - Recv: echo:Compiled: May 24 2019
2020-05-22 00:04:03,308 - Recv: echo: Free Memory: 10078  PlannerBufferBytes: 1232
2020-05-22 00:04:03,796 - Unexpected error while reading serial port, please consult octoprint.log for details: SerialException: 'device reports readiness to read but returned no data (device disconnected or multiple access on port?)' @ comm.py:_readline:2823
2020-05-22 00:04:03,820 - Please see https://faq.octoprint.org/serialerror for possible reasons of this.
2020-05-22 00:04:03,850 - Changing monitoring state from "Connecting" to "Offline (Error: SerialException: 'device reports readiness to read but returned no data (device disconnected or multiple access on port?)' @ comm.py:_readline:2823)"
2020-05-22 00:04:04,069 - Connection closed, closing down monitor
2020-05-22 00:04:10,606 - Connecting to: /dev/ttyUSB0
2020-05-22 00:04:10,724 - Changing monitoring state from "Offline" to "Opening serial port"
2020-05-22 00:04:10,781 - Connected to: Serial<id=0xa93336b0, open=True>(port='/dev/ttyUSB0', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=10.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
2020-05-22 00:04:10,824 - Starting baud rate detection...
2020-05-22 00:04:10,831 - Changing monitoring state from "Opening serial port" to "Detecting baudrate"
2020-05-22 00:04:12,010 - Trying baudrate: 115200
2020-05-22 00:04:12,058 - Unexpected error while writing to serial port: SerialException: 'write failed: [Errno 5] Input/output error' @ comm.py:_do_send_without_checksum:3490
2020-05-22 00:04:12,106 - Please see https://faq.octoprint.org/serialerror for possible reasons of this.
2020-05-22 00:04:12,216 - Changing monitoring state from "Detecting baudrate" to "Offline (Error: SerialException: 'write failed: [Errno 5] Input/output error' @ comm.py:_do_send_without_checksum:3490)"
2020-05-22 00:04:12,264 - Closing down send loop
2020-05-22 00:04:12,305 - Connection closed, closing down monitor