2020-12-07 11:26:34,096 - serial.log is currently not enabled, you can enable it via Settings > Serial Connection > Log communication to serial.log
2020-12-07 11:28:03,385 - serial.log is currently not enabled, you can enable it via Settings > Serial Connection > Log communication to serial.log
2020-12-07 11:28:25,696 - serial.log is currently not enabled, you can enable it via Settings > Serial Connection > Log communication to serial.log
2020-12-07 11:38:43,262 - Enabling serial logging
2020-12-07 11:38:49,396 - Changing monitoring state from "Offline" to "Detecting serial connection"
2020-12-07 11:38:49,796 - Performing autodetection with 6 port/baudrate candidates: /dev/ttyACM0@115200, /dev/ttyACM0@250000, /dev/ttyS0@115200, /dev/ttyS0@250000, VIRTUAL@115200, VIRTUAL@250000
2020-12-07 11:38:49,798 - Trying port /dev/ttyACM0, baudrate 115200
2020-12-07 11:38:49,803 - Connecting to port /dev/ttyACM0, baudrate 115200
2020-12-07 11:38:49,848 - Handshake attempt #1 with timeout 2.0s
2020-12-07 11:38:49,854 - Connected to: Serial<id=0x653551d0, open=True>(port='/dev/ttyACM0', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=2.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
2020-12-07 11:38:49,856 - Send: N0 M110 N0*125
2020-12-07 11:38:49,866 - Recv: echo:Unknown command: "echo:  G21    "
2020-12-07 11:38:50,084 - Recv: ok
2020-12-07 11:38:50,307 - Changing monitoring state from "Detecting serial connection" to "Operational"
2020-12-07 11:38:50,367 - Send: N0 M110 N0*125
2020-12-07 11:38:50,376 - Recv: ok
2020-12-07 11:38:50,383 - Recv: ok
2020-12-07 11:38:50,397 - Send: N1 M115*39
2020-12-07 11:38:50,447 - Send: N2 M21*18
2020-12-07 11:38:50,448 - Recv: FIRMWARE_NAME:Prusa-Firmware-Buddy 4.2.1-final+2072 (Github) SOURCE_CODE_URL:https://github.com/prusa3d/Prusa-Firmware-Buddy PROTOCOL_VERSION:1.0 MACHINE_TYPE:Prusa-mini EXTRUDER_COUNT:1 UUID:cede2a2f-41a2-4748-9b12-c55c62f367ff
2020-12-07 11:38:50,519 - Recv: Cap:SERIAL_XON_XOFF:0
2020-12-07 11:38:50,524 - Recv: Cap:BINARY_FILE_TRANSFER:0
2020-12-07 11:38:50,542 - Recv: Cap:EEPROM:0
2020-12-07 11:38:50,548 - Recv: Cap:VOLUMETRIC:1
2020-12-07 11:38:50,553 - Recv: Cap:AUTOREPORT_TEMP:1
2020-12-07 11:38:50,562 - Recv: Cap:PROGRESS:0
2020-12-07 11:38:50,565 - Recv: Cap:PRINT_JOB:1
2020-12-07 11:38:50,572 - Recv: Cap:AUTOLEVEL:1
2020-12-07 11:38:50,577 - Recv: Cap:Z_PROBE:1
2020-12-07 11:38:50,582 - Recv: Cap:LEVELING_DATA:1
2020-12-07 11:38:50,586 - Recv: Cap:BUILD_PERCENT:0
2020-12-07 11:38:50,588 - Recv: Cap:SOFTWARE_POWER:0
2020-12-07 11:38:50,590 - Recv: Cap:TOGGLE_LIGHTS:0
2020-12-07 11:38:50,592 - Recv: Cap:CASE_LIGHT_BRIGHTNESS:0
2020-12-07 11:38:50,594 - Recv: Cap:EMERGENCY_PARSER:0
2020-12-07 11:38:50,597 - Recv: Cap:PROMPT_SUPPORT:1
2020-12-07 11:38:50,601 - Recv: Cap:AUTOREPORT_SD_STATUS:0
2020-12-07 11:38:50,609 - Recv: Cap:THERMAL_PROTECTION:1
2020-12-07 11:38:50,617 - Recv: Cap:MOTION_MODES:0
2020-12-07 11:38:50,619 - Recv: Cap:CHAMBER_TEMPERATURE:0
2020-12-07 11:38:50,622 - Recv: ok
2020-12-07 11:38:50,625 - Recv: ok
2020-12-07 11:38:50,626 - Send: M155 S2
2020-12-07 11:38:50,628 - Send: M876 P1
2020-12-07 11:38:50,630 - Recv: ok
2020-12-07 11:38:50,633 - Recv: ok
2020-12-07 11:38:52,638 - Recv:  T:15.00 /0.00 B:15.63 /0.00 A:25.00 /0.00 @:0 B@:0
2020-12-07 11:38:54,636 - Recv:  T:15.04 /0.00 B:15.47 /0.00 A:25.00 /0.00 @:0 B@:0
2020-12-07 11:38:56,122 - Changing monitoring state from "Operational" to "Starting"
2020-12-07 11:38:56,245 - Send: N0 M110 N0*125
2020-12-07 11:38:56,251 - Recv: ok
2020-12-07 11:38:56,265 - Changing monitoring state from "Starting" to "Printing"
2020-12-07 11:38:56,293 - Send: N1 M73 P0 R7*19
2020-12-07 11:38:56,296 - Recv: ok
2020-12-07 11:38:56,299 - Send: N2 M201 X1250 Y1250 Z400 E5000*13
2020-12-07 11:38:56,301 - Recv: ok
2020-12-07 11:38:56,304 - Send: N3 M203 X180 Y180 Z12 E80*52
2020-12-07 11:38:56,307 - Recv: ok
2020-12-07 11:38:56,310 - Send: N4 M204 P1250 R1250 T1250*81
2020-12-07 11:38:56,313 - Recv: ok
2020-12-07 11:38:56,317 - Send: N5 M205 X8.00 Y8.00 Z2.00 E10.00*12
2020-12-07 11:38:56,318 - Recv: ok
2020-12-07 11:38:56,322 - Send: N6 M205 S0 T0*37
2020-12-07 11:38:56,325 - Recv: ok
2020-12-07 11:38:56,328 - Send: N7 M107*34
2020-12-07 11:38:56,331 - Recv: ok
2020-12-07 11:38:56,334 - Send: N8 G90*24
2020-12-07 11:38:56,338 - Recv: ok
2020-12-07 11:38:56,341 - Send: N9 M83*17
2020-12-07 11:38:56,343 - Recv: ok
2020-12-07 11:38:56,346 - Send: N10 M104 S170*82
2020-12-07 11:38:56,350 - Recv: ok
2020-12-07 11:38:56,353 - Send: N11 M140 S60*99
2020-12-07 11:38:56,357 - Recv: ok
2020-12-07 11:38:56,360 - Send: N12 M109 R170*92
2020-12-07 11:38:56,369 - Recv:  T:14.82 /170.00 B:15.43 /60.00 A:25.00 /0.00 @:0 B@:0 W:?
2020-12-07 11:39:04,275 - Unexpected error while reading serial port, please consult octoprint.log for details: SerialException: 'device reports readiness to read but returned no data (device disconnected or multiple access on port?)' @ comm.py:_readline:3831
2020-12-07 11:39:04,278 - Please see https://faq.octoprint.org/serialerror for possible reasons of this.
2020-12-07 11:39:04,304 - Changing monitoring state from "Printing" to "Offline (Error: SerialException: 'device reports readiness to read but returned no data (device disconnected or multiple access on port?)' @ comm.py:_readline:3831)"
2020-12-07 11:39:04,315 - Connection closed, closing down monitor