Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: usb usb options: -r 640x480 -f 10 -d /dev/v4l/by-id/usb-046d_C922_Pro_Stream_Webcam_8CF98BAF-video-index0 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: /dev/v4l/by-id/usb-046d_C922_Pro_Stream_Webcam_8CF98BAF-video-index0 ----------------------------------------------- cfg_file: /boot/octopi.conf.d/webcam2.txt camera: usb usb options: -r 640x480 -f 10 -d /dev/v4l/by-id/usb-Etron_Technology__Inc._USB2.0_Camera-video-index0 raspi options: -fps 10 http options: -w ./www-octopi -n -p 8081 Explicitly USB device: /dev/v4l/by-id/usb-Etron_Technology__Inc._USB2.0_Camera-video-index0 ----------------------------------------------- Found video devices: /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video2 /dev/video3 /dev/video4 config file='/boot/octopi.txt':USB device was set in options and found in devices, start MJPG-streamer with the configured USB video device: /dev/video1 <13>Aug 12 11:12:58 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video1 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video1 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www-octopi/ o: HTTP TCP port........: 8080 o: HTTP Listen Address..: 127.0.0.1 o: username:password....: disabled o: commands.............: disabled config file='/boot/octopi.conf.d/webcam2.txt':USB device was set in options and found in devices, start MJPG-streamer with the configured USB video device: /dev/video3 <13>Aug 12 11:12:59 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n -p 8081 -i input_uvc.so -r 640x480 -f 10 -d /dev/video3 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video3 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT i: Could not obtain the requested pixelformat: MJPG , driver gave us: YUYV ... will try to handle this by checking against supported formats. ... Falling back to YUV mode (consider using -yuv option). Note that this requires much more CPU power i: FPS coerced ......: from 10 to 30 UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www-octopi/ o: HTTP TCP port........: 8081 o: HTTP Listen Address..: (null) o: username:password....: disabled o: commands.............: disabled Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: usb usb options: -r 640x480 -f 10 -d /dev/v4l/by-id/usb-046d_C922_Pro_Stream_Webcam_8CF98BAF-video-index0 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: /dev/v4l/by-id/usb-046d_C922_Pro_Stream_Webcam_8CF98BAF-video-index0 ----------------------------------------------- cfg_file: /boot/octopi.conf.d/webcam2.txt camera: usb usb options: -r 640x480 -f 10 -d /dev/v4l/by-id/usb-Etron_Technology__Inc._USB2.0_Camera-video-index0 raspi options: -fps 10 http options: -w ./www-octopi -n -p 8081 Explicitly USB device: /dev/v4l/by-id/usb-Etron_Technology__Inc._USB2.0_Camera-video-index0 ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video2 /dev/video3 config file='/boot/octopi.txt':USB device was set in options and found in devices, start MJPG-streamer with the configured USB video device: /dev/video0 <13>Aug 12 11:13:06 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video0 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www-octopi/ o: HTTP TCP port........: 8080 o: HTTP Listen Address..: 127.0.0.1 o: username:password....: disabled o: commands.............: disabled config file='/boot/octopi.conf.d/webcam2.txt':USB device was set in options and found in devices, start MJPG-streamer with the configured USB video device: /dev/video2 <13>Aug 12 11:13:07 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n -p 8081 -i input_uvc.so -r 640x480 -f 10 -d /dev/video2 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video2 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT i: Could not obtain the requested pixelformat: MJPG , driver gave us: YUYV ... will try to handle this by checking against supported formats. ... Falling back to YUV mode (consider using -yuv option). Note that this requires much more CPU power i: FPS coerced ......: from 10 to 30 UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www-octopi/ o: HTTP TCP port........: 8081 o: HTTP Listen Address..: (null) o: username:password....: disabled o: commands.............: disabled Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: usb usb options: -r 640x480 -f 10 -d /dev/v4l/by-id/usb-046d_C922_Pro_Stream_Webcam_8CF98BAF-video-index0 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: /dev/v4l/by-id/usb-046d_C922_Pro_Stream_Webcam_8CF98BAF-video-index0 ----------------------------------------------- cfg_file: /boot/octopi.conf.d/webcam2.txt camera: usb usb options: -r 640x480 -f 10 -d /dev/v4l/by-id/usb-Etron_Technology__Inc._USB2.0_Camera-video-index0 raspi options: -fps 10 http options: -w ./www-octopi -n -p 8081 Explicitly USB device: /dev/v4l/by-id/usb-Etron_Technology__Inc._USB2.0_Camera-video-index0 ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video2 /dev/video3 config file='/boot/octopi.txt':USB device was set in options and found in devices, start MJPG-streamer with the configured USB video device: /dev/video0 <13>Aug 12 11:16:29 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video0 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www-octopi/ o: HTTP TCP port........: 8080 o: HTTP Listen Address..: 127.0.0.1 o: username:password....: disabled o: commands.............: disabled config file='/boot/octopi.conf.d/webcam2.txt':USB device was set in options and found in devices, start MJPG-streamer with the configured USB video device: /dev/video2 <13>Aug 12 11:16:30 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n -p 8081 -i input_uvc.so -r 640x480 -f 10 -d /dev/video2 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video2 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT i: Could not obtain the requested pixelformat: MJPG , driver gave us: YUYV ... will try to handle this by checking against supported formats. ... Falling back to YUV mode (consider using -yuv option). Note that this requires much more CPU power i: FPS coerced ......: from 10 to 30 UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www-octopi/ o: HTTP TCP port........: 8081 o: HTTP Listen Address..: (null) o: username:password....: disabled o: commands.............: disabled Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: usb usb options: -r 640x480 -f 10 -d /dev/v4l/by-id/usb-046d_C922_Pro_Stream_Webcam_8CF98BAF-video-index0 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: /dev/v4l/by-id/usb-046d_C922_Pro_Stream_Webcam_8CF98BAF-video-index0 ----------------------------------------------- Error opening terminal: unknown. cfg_file: /boot/octopi.conf.d/webcam2.txt camera: usb usb options: -r 640x480 -f 10 -d /dev/v4l/by-id/usb-Etron_Technology__Inc._USB2.0_Camera-video-index1 raspi options: -fps 10 http options: -w ./www-octopi -n -p 8081 Explicitly USB device: /dev/v4l/by-id/usb-Etron_Technology__Inc._USB2.0_Camera-video-index1 ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video2 /dev/video3 config file='/boot/octopi.txt':USB device was set in options and found in devices, start MJPG-streamer with the configured USB video device: /dev/video0 <13>Aug 12 12:20:06 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video0 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www-octopi/ o: HTTP TCP port........: 8080 o: HTTP Listen Address..: 127.0.0.1 o: username:password....: disabled o: commands.............: disabled config file='/boot/octopi.conf.d/webcam2.txt':USB device was set in options and found in devices, start MJPG-streamer with the configured USB video device: /dev/video3 <13>Aug 12 12:20:07 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n -p 8081 -i input_uvc.so -r 640x480 -f 10 -d /dev/video3 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video3 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Unable to set format: 1196444237 res: 640x480 Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: usb usb options: -r 640x480 -f 10 -d /dev/v4l/by-id/usb-046d_C922_Pro_Stream_Webcam_8CF98BAF-video-index0 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: /dev/v4l/by-id/usb-046d_C922_Pro_Stream_Webcam_8CF98BAF-video-index0 ----------------------------------------------- Error opening terminal: unknown. cfg_file: /boot/octopi.conf.d/webcam2.txt camera: usb usb options: -r 640x480 -f 10 -d /dev/v4l/by-id/usb-Etron_Technology__Inc._USB2.0_Camera-video-index1 raspi options: -fps 10 http options: -w ./www-octopi -n -p 8081 Explicitly USB device: /dev/v4l/by-id/usb-Etron_Technology__Inc._USB2.0_Camera-video-index1 ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video2 /dev/video3 config file='/boot/octopi.txt':USB device was set in options and found in devices, start MJPG-streamer with the configured USB video device: /dev/video0 <13>Aug 12 12:20:14 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video0 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www-octopi/ o: HTTP TCP port........: 8080 o: HTTP Listen Address..: 127.0.0.1 o: username:password....: disabled o: commands.............: disabled config file='/boot/octopi.conf.d/webcam2.txt':USB device was set in options and found in devices, start MJPG-streamer with the configured USB video device: /dev/video3 <13>Aug 12 12:20:15 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n -p 8081 -i input_uvc.so -r 640x480 -f 10 -d /dev/video3 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video3 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Unable to set format: 1196444237 res: 640x480 Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: usb usb options: -r 640x480 -f 10 -d /dev/v4l/by-id/usb-046d_C922_Pro_Stream_Webcam_8CF98BAF-video-index0 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: /dev/v4l/by-id/usb-046d_C922_Pro_Stream_Webcam_8CF98BAF-video-index0 ----------------------------------------------- Error opening terminal: unknown. cfg_file: /boot/octopi.conf.d/webcam2.txt camera: usb usb options: -r 640x480 -f 10 -d /dev/v4l/by-id/usb-Etron_Technology__Inc._USB2.0_Camera-video-index1 raspi options: -fps 10 http options: -w ./www-octopi -n -p 8081 Explicitly USB device: /dev/v4l/by-id/usb-Etron_Technology__Inc._USB2.0_Camera-video-index1 ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video2 /dev/video3 config file='/boot/octopi.txt':USB device was set in options and found in devices, start MJPG-streamer with the configured USB video device: /dev/video0 <13>Aug 12 12:28:57 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video0 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www-octopi/ o: HTTP TCP port........: 8080 o: HTTP Listen Address..: 127.0.0.1 o: username:password....: disabled o: commands.............: disabled config file='/boot/octopi.conf.d/webcam2.txt':USB device was set in options and found in devices, start MJPG-streamer with the configured USB video device: /dev/video3 <13>Aug 12 12:28:58 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n -p 8081 -i input_uvc.so -r 640x480 -f 10 -d /dev/video3 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video3 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Unable to set format: 1196444237 res: 640x480 Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: usb usb options: -r 640x480 -f 10 -d /dev/v4l/by-id/usb-046d_C922_Pro_Stream_Webcam_8CF98BAF-video-index0 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: /dev/v4l/by-id/usb-046d_C922_Pro_Stream_Webcam_8CF98BAF-video-index0 ----------------------------------------------- Error opening terminal: unknown. cfg_file: /boot/octopi.conf.d/webcam2.txt camera: usb usb options: -r 640x480 -f 10 -d /dev/v4l/by-id/usb-Etron_Technology__Inc._USB2.0_Camera-video-index1 raspi options: -fps 10 http options: -w ./www-octopi -n -p 8081 Explicitly USB device: /dev/v4l/by-id/usb-Etron_Technology__Inc._USB2.0_Camera-video-index1 ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video2 /dev/video3 config file='/boot/octopi.txt':USB device was set in options and found in devices, start MJPG-streamer with the configured USB video device: /dev/video2 <13>Aug 12 12:37:40 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video2 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video2 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www-octopi/ o: HTTP TCP port........: 8080 o: HTTP Listen Address..: 127.0.0.1 o: username:password....: disabled o: commands.............: disabled config file='/boot/octopi.conf.d/webcam2.txt':USB device was set in options and found in devices, start MJPG-streamer with the configured USB video device: /dev/video1 <13>Aug 12 12:37:41 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n -p 8081 -i input_uvc.so -r 640x480 -f 10 -d /dev/video1 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video1 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT Unable to set format: 1196444237 res: 640x480 Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: usb usb options: -r 640x480 -f 10 -d /dev/v4l/by-id/usb-046d_C922_Pro_Stream_Webcam_8CF98BAF-video-index0 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: /dev/v4l/by-id/usb-046d_C922_Pro_Stream_Webcam_8CF98BAF-video-index0 ----------------------------------------------- Error opening terminal: unknown. cfg_file: /boot/octopi.conf.d/webcam2.txt camera: usb usb options: -r 640x480 -f 10 -d /dev/v4l/by-id/usb-Etron_Technology__Inc._USB2.0_Camera-video-index0 raspi options: -fps 10 http options: -w ./www-octopi -n -p 8081 Explicitly USB device: /dev/v4l/by-id/usb-Etron_Technology__Inc._USB2.0_Camera-video-index0 ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video2 /dev/video3 config file='/boot/octopi.txt':USB device was set in options and found in devices, start MJPG-streamer with the configured USB video device: /dev/video2 <13>Aug 12 12:46:45 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video2 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video2 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www-octopi/ o: HTTP TCP port........: 8080 o: HTTP Listen Address..: 127.0.0.1 o: username:password....: disabled o: commands.............: disabled config file='/boot/octopi.conf.d/webcam2.txt':USB device was set in options and found in devices, start MJPG-streamer with the configured USB video device: /dev/video0 <13>Aug 12 12:46:46 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n -p 8081 -i input_uvc.so -r 640x480 -f 10 -d /dev/video0 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT i: Could not obtain the requested pixelformat: MJPG , driver gave us: YUYV ... will try to handle this by checking against supported formats. ... Falling back to YUV mode (consider using -yuv option). Note that this requires much more CPU power i: FPS coerced ......: from 10 to 30 UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www-octopi/ o: HTTP TCP port........: 8081 o: HTTP Listen Address..: (null) o: username:password....: disabled o: commands.............: disabled Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: usb usb options: -r 640x480 -f 10 -d /dev/v4l/by-id/usb-046d_C922_Pro_Stream_Webcam_8CF98BAF-video-index0 raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: /dev/v4l/by-id/usb-046d_C922_Pro_Stream_Webcam_8CF98BAF-video-index0 ----------------------------------------------- Error opening terminal: unknown. cfg_file: /boot/octopi.conf.d/webcam2.txt camera: usb usb options: -r 640x480 -f 10 -d /dev/v4l/by-id/usb-Etron_Technology__Inc._USB2.0_Camera-video-index0 raspi options: -fps 10 http options: -w ./www-octopi -n -p 8081 Explicitly USB device: /dev/v4l/by-id/usb-Etron_Technology__Inc._USB2.0_Camera-video-index0 ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video2 /dev/video3 config file='/boot/octopi.txt':USB device was set in options and found in devices, start MJPG-streamer with the configured USB video device: /dev/video2 <13>Aug 12 12:46:54 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -d /dev/video2 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video2 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www-octopi/ o: HTTP TCP port........: 8080 o: HTTP Listen Address..: 127.0.0.1 o: username:password....: disabled o: commands.............: disabled config file='/boot/octopi.conf.d/webcam2.txt':USB device was set in options and found in devices, start MJPG-streamer with the configured USB video device: /dev/video0 <13>Aug 12 12:46:55 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n -p 8081 -i input_uvc.so -r 640x480 -f 10 -d /dev/video0 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: JPEG i: TV-Norm...........: DEFAULT i: Could not obtain the requested pixelformat: MJPG , driver gave us: YUYV ... will try to handle this by checking against supported formats. ... Falling back to YUV mode (consider using -yuv option). Note that this requires much more CPU power i: FPS coerced ......: from 10 to 30 UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www-octopi/ o: HTTP TCP port........: 8081 o: HTTP Listen Address..: (null) o: username:password....: disabled o: commands.............: disabled Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: usb usb options: -r 640x480 -f 10 -d /dev/v4l/by-id/usb-046d_C922_Pro_Stream_Webcam_8CF98BAF-video-index0 -y raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: /dev/v4l/by-id/usb-046d_C922_Pro_Stream_Webcam_8CF98BAF-video-index0 ----------------------------------------------- Error opening terminal: unknown. cfg_file: /boot/octopi.conf.d/webcam2.txt camera: usb usb options: -r 640x480 -f 10 -d /dev/v4l/by-id/usb-Etron_Technology__Inc._USB2.0_Camera-video-index0 -y raspi options: -fps 10 http options: -w ./www-octopi -n -p 8081 Explicitly USB device: /dev/v4l/by-id/usb-Etron_Technology__Inc._USB2.0_Camera-video-index0 ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video2 /dev/video3 config file='/boot/octopi.txt':USB device was set in options and found in devices, start MJPG-streamer with the configured USB video device: /dev/video2 <13>Aug 12 13:04:43 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -y -d /dev/video2 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video2 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: YUYV i: JPEG Quality......: 80 i: TV-Norm...........: DEFAULT UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www-octopi/ o: HTTP TCP port........: 8080 o: HTTP Listen Address..: 127.0.0.1 o: username:password....: disabled o: commands.............: disabled config file='/boot/octopi.conf.d/webcam2.txt':USB device was set in options and found in devices, start MJPG-streamer with the configured USB video device: /dev/video0 <13>Aug 12 13:04:44 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n -p 8081 -i input_uvc.so -r 640x480 -f 10 -y -d /dev/video0 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: YUYV i: JPEG Quality......: 80 i: TV-Norm...........: DEFAULT i: FPS coerced ......: from 10 to 30 UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www-octopi/ o: HTTP TCP port........: 8081 o: HTTP Listen Address..: (null) o: username:password....: disabled o: commands.............: disabled Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: usb usb options: -r 640x480 -f 10 -d /dev/v4l/by-id/usb-046d_C922_Pro_Stream_Webcam_8CF98BAF-video-index0 -y raspi options: -fps 10 http options: -w ./www-octopi -n --listen 127.0.0.1 Explicitly USB device: /dev/v4l/by-id/usb-046d_C922_Pro_Stream_Webcam_8CF98BAF-video-index0 ----------------------------------------------- Error opening terminal: unknown. cfg_file: /boot/octopi.conf.d/webcam2.txt camera: usb usb options: -r 640x480 -f 10 -d /dev/v4l/by-id/usb-Etron_Technology__Inc._USB2.0_Camera-video-index0 -y raspi options: -fps 10 http options: -w ./www-octopi -n -p 8081 Explicitly USB device: /dev/v4l/by-id/usb-Etron_Technology__Inc._USB2.0_Camera-video-index0 ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video2 /dev/video3 config file='/boot/octopi.txt':USB device was set in options and found in devices, start MJPG-streamer with the configured USB video device: /dev/video2 <13>Aug 12 13:04:51 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n --listen 127.0.0.1 -i input_uvc.so -r 640x480 -f 10 -y -d /dev/video2 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video2 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: YUYV i: JPEG Quality......: 80 i: TV-Norm...........: DEFAULT UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www-octopi/ o: HTTP TCP port........: 8080 o: HTTP Listen Address..: 127.0.0.1 o: username:password....: disabled o: commands.............: disabled config file='/boot/octopi.conf.d/webcam2.txt':USB device was set in options and found in devices, start MJPG-streamer with the configured USB video device: /dev/video0 <13>Aug 12 13:04:53 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www-octopi -n -p 8081 -i input_uvc.so -r 640x480 -f 10 -y -d /dev/video0 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: YUYV i: JPEG Quality......: 80 i: TV-Norm...........: DEFAULT i: FPS coerced ......: from 10 to 30 UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www-octopi/ o: HTTP TCP port........: 8081 o: HTTP Listen Address..: (null) o: username:password....: disabled o: commands.............: disabled Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: usb usb options: -r 640x480 -f 10 -d /dev/v4l/by-id/usb-046d_C922_Pro_Stream_Webcam_8CF98BAF-video-index0 -y raspi options: -fps 10 http options: -w ./www -n Explicitly USB device: /dev/v4l/by-id/usb-046d_C922_Pro_Stream_Webcam_8CF98BAF-video-index0 ----------------------------------------------- Error opening terminal: unknown. cfg_file: /boot/octopi.conf.d/webcam2.txt camera: usb usb options: -r 640x480 -f 10 -d /dev/v4l/by-id/usb-Etron_Technology__Inc._USB2.0_Camera-video-index0 -y raspi options: -fps 10 http options: -w ./www -p 8081 Explicitly USB device: /dev/v4l/by-id/usb-Etron_Technology__Inc._USB2.0_Camera-video-index0 ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video2 /dev/video3 config file='/boot/octopi.txt':USB device was set in options and found in devices, start MJPG-streamer with the configured USB video device: /dev/video2 <13>Aug 12 13:12:04 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www -n -i input_uvc.so -r 640x480 -f 10 -y -d /dev/video2 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video2 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: YUYV i: JPEG Quality......: 80 i: TV-Norm...........: DEFAULT UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www/ o: HTTP TCP port........: 8080 o: HTTP Listen Address..: (null) o: username:password....: disabled o: commands.............: disabled config file='/boot/octopi.conf.d/webcam2.txt':USB device was set in options and found in devices, start MJPG-streamer with the configured USB video device: /dev/video0 <13>Aug 12 13:12:05 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www -p 8081 -i input_uvc.so -r 640x480 -f 10 -y -d /dev/video0 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: YUYV i: JPEG Quality......: 80 i: TV-Norm...........: DEFAULT i: FPS coerced ......: from 10 to 30 UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www/ o: HTTP TCP port........: 8081 o: HTTP Listen Address..: (null) o: username:password....: disabled o: commands.............: enabled Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: usb usb options: -r 640x480 -f 10 -d /dev/v4l/by-id/usb-046d_C922_Pro_Stream_Webcam_8CF98BAF-video-index0 -y raspi options: -fps 10 http options: -w ./www -n Explicitly USB device: /dev/v4l/by-id/usb-046d_C922_Pro_Stream_Webcam_8CF98BAF-video-index0 ----------------------------------------------- Error opening terminal: unknown. cfg_file: /boot/octopi.conf.d/webcam2.txt camera: usb usb options: -r 640x480 -f 10 -d /dev/v4l/by-id/usb-Etron_Technology__Inc._USB2.0_Camera-video-index0 -y raspi options: -fps 10 http options: -w ./www -p 8081 Explicitly USB device: /dev/v4l/by-id/usb-Etron_Technology__Inc._USB2.0_Camera-video-index0 ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video2 /dev/video3 config file='/boot/octopi.txt':USB device was set in options and found in devices, start MJPG-streamer with the configured USB video device: /dev/video2 <13>Aug 12 13:12:13 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www -n -i input_uvc.so -r 640x480 -f 10 -y -d /dev/video2 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video2 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: YUYV i: JPEG Quality......: 80 i: TV-Norm...........: DEFAULT UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www/ o: HTTP TCP port........: 8080 o: HTTP Listen Address..: (null) o: username:password....: disabled o: commands.............: disabled config file='/boot/octopi.conf.d/webcam2.txt':USB device was set in options and found in devices, start MJPG-streamer with the configured USB video device: /dev/video0 <13>Aug 12 13:12:14 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www -p 8081 -i input_uvc.so -r 640x480 -f 10 -y -d /dev/video0 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: YUYV i: JPEG Quality......: 80 i: TV-Norm...........: DEFAULT i: FPS coerced ......: from 10 to 30 UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www/ o: HTTP TCP port........: 8081 o: HTTP Listen Address..: (null) o: username:password....: disabled o: commands.............: enabled Done bring up all configured video device Goodbye... Starting up webcamDaemon... --- Configuration: ---------------------------- cfg_file: /boot/octopi.txt camera: usb usb options: -r 640x480 -f 10 -d /dev/v4l/by-id/usb-046d_C922_Pro_Stream_Webcam_8CF98BAF-video-index0 -y raspi options: -fps 10 http options: -w ./www -n Explicitly USB device: /dev/v4l/by-id/usb-046d_C922_Pro_Stream_Webcam_8CF98BAF-video-index0 ----------------------------------------------- Error opening terminal: unknown. cfg_file: /boot/octopi.conf.d/webcam2.txt camera: usb usb options: -r 640x480 -f 10 -d /dev/v4l/by-id/usb-Etron_Technology__Inc._USB2.0_Camera-video-index0 -y raspi options: -fps 10 http options: -w ./www -p 8081 Explicitly USB device: /dev/v4l/by-id/usb-Etron_Technology__Inc._USB2.0_Camera-video-index0 ----------------------------------------------- Found video devices: /dev/video0 /dev/video1 /dev/video10 /dev/video11 /dev/video12 /dev/video13 /dev/video14 /dev/video15 /dev/video16 /dev/video2 /dev/video3 config file='/boot/octopi.txt':USB device was set in options and found in devices, start MJPG-streamer with the configured USB video device: /dev/video2 <13>Aug 12 13:19:51 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www -n -i input_uvc.so -r 640x480 -f 10 -y -d /dev/video2 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video2 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: YUYV i: JPEG Quality......: 80 i: TV-Norm...........: DEFAULT UVCIOC_CTRL_ADD - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_ADD - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt (relative): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Pan/tilt Reset: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Focus (absolute): Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Mode: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at LED1 Frequency: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Disable video processing: Inappropriate ioctl for device (25) UVCIOC_CTRL_MAP - Error at Raw bits per pixel: Inappropriate ioctl for device (25) o: www-folder-path......: ./www/ o: HTTP TCP port........: 8080 o: HTTP Listen Address..: (null) o: username:password....: disabled o: commands.............: disabled bind: Address already in use config file='/boot/octopi.conf.d/webcam2.txt':USB device was set in options and found in devices, start MJPG-streamer with the configured USB video device: /dev/video0 <13>Aug 12 13:19:52 root: Starting USB webcam Checking for VL805 (Raspberry Pi 4)... - It seems that you don't have VL805 (Raspberry Pi 4). There should be no problems with USB (a.k.a. select() timeout) Running ./mjpg_streamer -o output_http.so -w ./www -p 8081 -i input_uvc.so -r 640x480 -f 10 -y -d /dev/video0 MJPG Streamer Version: git rev: 5554f42c352ecfa7edaec6fc51e507afce605a34 i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 10 i: Format............: YUYV i: JPEG Quality......: 80 i: TV-Norm...........: DEFAULT libv4l2: error setting pixformat: Device or resource busy Unable to set format: 1448695129 res: 640x480 Init v4L2 failed !! exit fatal i: init_VideoIn failed Done bring up all configured video device Goodbye...