2019-07-20 09:17:10,494 - Changing monitoring state from "Offline" to "Detecting serial port" 2019-07-20 09:17:10,941 - Serial port list: ['/dev/ttyUSB0'] 2019-07-20 09:17:10,973 - Connecting to: /dev/ttyUSB0 2019-07-20 09:17:11,065 - Changing monitoring state from "Detecting serial port" to "Opening serial port" 2019-07-20 09:17:11,240 - Connected to: Serial(port='/dev/ttyUSB0', baudrate=250000, bytesize=8, parity='N', stopbits=1, timeout=30.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor 2019-07-20 09:17:11,298 - Changing monitoring state from "Opening serial port" to "Connecting" 2019-07-20 09:17:11,994 - Recv: start 2019-07-20 09:17:12,281 - Recv: echo:Marlin 1.0.0 2019-07-20 09:17:12,339 - Send: N0 M110 N0*125 2019-07-20 09:17:12,394 - Recv: echo: Last Updated: Dec 13 2016 11:30:39 | Author: Ver.2.3.5 2019-07-20 09:17:12,448 - Recv: Compiled: Dec 13 2016 2019-07-20 09:17:12,505 - Recv: echo: Free Memory: 1888 PlannerBufferBytes: 1232 2019-07-20 09:17:12,578 - Recv: echo:Stored settings retrieved 2019-07-20 09:17:12,638 - Recv: echo:Steps per unit: 2019-07-20 09:17:12,702 - Recv: echo: M92 X78.74 Y78.74 Z78.74 E73.00 2019-07-20 09:17:12,937 - Recv: echo:Maximum feedrates (mm/s): 2019-07-20 09:17:13,132 - Recv: echo: M203 X300.00 Y300.00 Z300.00 E80.00 2019-07-20 09:17:13,220 - Recv: echo:Maximum Acceleration (mm/s2): 2019-07-20 09:17:13,296 - Recv: echo: M201 X9000 Y9000 Z9000 E10000 2019-07-20 09:17:13,375 - Recv: echo:Acceleration: S=acceleration, T=retract acceleration 2019-07-20 09:17:13,476 - Recv: echo: M204 S1200.00 T3000.00 2019-07-20 09:17:13,640 - Recv: echo:Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum XY jerk (mm/s), Z=maximum Z jerk (mm/s), E=maximum E jerk (mm/s) 2019-07-20 09:17:13,732 - Recv: echo: M205 S0.00 T0.00 B20000 X10.00 Z10.00 E5.00 2019-07-20 09:17:13,804 - Recv: echo:Home offset (mm): 2019-07-20 09:17:13,883 - Recv: echo: M206 X0.00 Y0.00 Z1.17 2019-07-20 09:17:13,935 - Recv: echo:PID settings: 2019-07-20 09:17:13,997 - Recv: echo: M301 P3.61 I0.22 D15.16 2019-07-20 09:17:14,043 - Recv: plainFactor: 2019-07-20 09:17:14,103 - Recv: 36.42 2019-07-20 09:17:14,170 - Recv: 73.69 2019-07-20 09:17:14,204 - Recv: -20734.16 2019-07-20 09:17:14,265 - Recv: plainFactor: 2019-07-20 09:17:14,287 - Recv: -1756.53 2019-07-20 09:17:14,336 - Recv: 3554.10 2019-07-20 09:17:14,429 - Recv: 1.53 2019-07-20 09:17:14,496 - Recv: 6.29 2019-07-20 09:17:14,569 - Recv: PCB VERSION:0 2019-07-20 09:17:14,597 - Recv: lcdVer 2019-07-20 09:17:14,658 - Recv: 10 2019-07-20 09:17:14,702 - Recv: lcdVer 2019-07-20 09:17:14,762 - Recv: 10 2019-07-20 09:17:14,800 - Recv: 1 2019-07-20 09:17:44,889 - There was a timeout while trying to connect to the printer 2019-07-20 09:17:45,008 - Changing monitoring state from "Connecting" to "Offline" 2019-07-20 09:17:45,237 - Connection closed, closing down monitor 2019-07-20 09:19:22,008 - Changing monitoring state from "Offline" to "Detecting serial port" 2019-07-20 09:19:22,368 - Serial port list: ['/dev/ttyUSB0'] 2019-07-20 09:19:22,395 - Connecting to: /dev/ttyUSB0 2019-07-20 09:19:22,508 - Changing monitoring state from "Detecting serial port" to "Opening serial port" 2019-07-20 09:19:22,689 - Connected to: Serial(port='/dev/ttyUSB0', baudrate=250000, bytesize=8, parity='N', stopbits=1, timeout=30.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor 2019-07-20 09:19:22,714 - Changing monitoring state from "Opening serial port" to "Connecting" 2019-07-20 09:19:23,479 - Recv: start 2019-07-20 09:19:23,694 - Recv: echo:Marlin 1.0.0 2019-07-20 09:19:23,812 - Send: N0 M110 N0*125 2019-07-20 09:19:23,819 - Recv: echo: Last Updated: Dec 13 2016 11:30:39 | Author: Ver.2.3.5 2019-07-20 09:19:23,928 - Recv: Compiled: Dec 13 2016 2019-07-20 09:19:24,031 - Recv: echo: Free Memory: 1888 PlannerBufferBytes: 1232 2019-07-20 09:19:24,125 - Recv: echo:Stored settings retrieved 2019-07-20 09:19:24,220 - Recv: echo:Steps per unit: 2019-07-20 09:19:24,260 - Recv: echo: M92 X78.74 Y78.74 Z78.74 E73.00 2019-07-20 09:19:24,321 - Recv: echo:Maximum feedrates (mm/s): 2019-07-20 09:19:24,368 - Recv: echo: M203 X300.00 Y300.00 Z300.00 E80.00 2019-07-20 09:19:24,426 - Recv: echo:Maximum Acceleration (mm/s2): 2019-07-20 09:19:24,490 - Recv: echo: M201 X9000 Y9000 Z9000 E10000 2019-07-20 09:19:24,552 - Recv: echo:Acceleration: S=acceleration, T=retract acceleration 2019-07-20 09:19:24,609 - Recv: echo: M204 S1200.00 T3000.00 2019-07-20 09:19:24,653 - Recv: echo:Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum XY jerk (mm/s), Z=maximum Z jerk (mm/s), E=maximum E jerk (mm/s) 2019-07-20 09:19:24,728 - Recv: echo: M205 S0.00 T0.00 B20000 X10.00 Z10.00 E5.00 2019-07-20 09:19:24,825 - Recv: echo:Home offset (mm): 2019-07-20 09:19:24,922 - Recv: echo: M206 X0.00 Y0.00 Z1.17 2019-07-20 09:19:24,997 - Recv: echo:PID settings: 2019-07-20 09:19:25,032 - Recv: echo: M301 P3.61 I0.22 D15.16 2019-07-20 09:19:25,110 - Recv: plainFactor: 2019-07-20 09:19:25,165 - Recv: 36.42 2019-07-20 09:19:25,222 - Recv: 73.69 2019-07-20 09:19:25,283 - Recv: -20734.16 2019-07-20 09:19:25,331 - Recv: plainFactor: 2019-07-20 09:19:25,403 - Recv: -1756.53 2019-07-20 09:19:25,496 - Recv: 3554.10 2019-07-20 09:19:25,562 - Recv: 1.53 2019-07-20 09:19:25,633 - Recv: 6.29 2019-07-20 09:19:25,712 - Recv: PCB VERSION:0 2019-07-20 09:19:25,754 - Recv: lcdVer 2019-07-20 09:19:25,817 - Recv: 10 2019-07-20 09:19:25,858 - Recv: lcdVer 2019-07-20 09:19:25,920 - Recv: 10 2019-07-20 09:19:25,974 - Recv: 1 2019-07-20 09:19:56,035 - There was a timeout while trying to connect to the printer 2019-07-20 09:19:56,229 - Changing monitoring state from "Connecting" to "Offline" 2019-07-20 09:19:56,418 - Connection closed, closing down monitor