2022-05-08 14:01:25,851 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2022-05-08 14:01:25,858 - octoprint.server - INFO - --- Log roll over detected --------------------------------------------------- 2022-05-08 14:01:25,859 - octoprint.server - INFO - OctoPrint 1.7.3 2022-05-08 14:01:25,859 - octoprint.server - INFO - SAFE MODE is active. Third party plugins are disabled! 2022-05-08 14:01:25,866 - octoprint.plugin.core - INFO - 40 plugin(s) registered with the system: | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/appkeys | Backup & Restore (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/backup | !Backup Scheduler (0.1.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_backupscheduler | !Camera Settings (0.3.2) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_CameraSettings | Core Wizard (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/corewizard | Discovery (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/discovery | !DisplayLayerProgress Plugin (1.28.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_DisplayLayerProgress | !Draggable Files (1.1.2) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_draggable_files | Error Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/errortracking | Event Manager (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/eventmanager | !Exclude Region (0.3.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_excluderegion | File Check (2021.2.23) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_file_check | Firmware Check (2021.10.11) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_firmware_check | !Floating Navbar (0.3.7) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_floatingnavbar | GCode Viewer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/gcodeviewer | !HeaterTimeout (0.0.4) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_HeaterTimeout | !ipOnConnect (0.2.4) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_ipOnConnect | Logging (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/logging | !Navbar Temperature Plugin (0.14) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_navbartemp | !OctoApp (1.0.10) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_octoapp | !OctoDash Companion (0.0.7) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_octodashcompanion | !OctoEverywhere! (1.6.6) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_octoeverywhere | Pi Support Plugin (2022.3.28) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/pluginmanager | !Preheat Button (0.8.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_preheat | !PrintTimeGenius Plugin (2.2.8) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_PrintTimeGenius | !Simple Emergency Stop (1.0.5) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_simpleemergencystop | !Slicer Thumbnails (1.0.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_prusaslicerthumbnails | Software Update (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/softwareupdate | !SpoolManager Plugin (1.7.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_SpoolManager | !Terminal Messaging (0.1.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_terminalmessaging | !Themeify (1.2.2) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_themeify | !TouchUI (0.3.18) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_touchui | !UI Customizer (0.1.8.9) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_uicustomizer | Virtual Printer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/virtual_printer | !WS281x LED Status (0.8.1) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_ws281x_led_status Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2022-05-08 14:01:25,886 - octoprint.environment - INFO - Detected environment is Python 3.7.3 under Linux (linux). Details: | hardware: | cores: 4 | freq: 1400.0 | ram: 914010112 | os: | bits: 32 | id: linux | platform: linux | plugins: | pi_support: | model: Raspberry Pi 3 Model B Plus Rev 1.3 | octopi_version: 0.18.0 | throttle_state: '0x50000' | python: | pip: 20.3.3 | version: 3.7.3 | virtualenv: /home/pi/oprint 2022-05-08 14:01:25,886 - octoprint.server - INFO - ------------------------------------------------------------------------------ 2022-05-08 14:01:27,052 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 172817, 'printer_state': 'OPERATIONAL'} 2022-05-08 14:16:25,853 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2022-05-08 14:16:26,789 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 173717, 'printer_state': 'OPERATIONAL'} 2022-05-08 14:31:25,854 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2022-05-08 14:31:26,774 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 174617, 'printer_state': 'OPERATIONAL'} 2022-05-08 14:46:25,856 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2022-05-08 14:46:26,826 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 175517, 'printer_state': 'OPERATIONAL'} 2022-05-08 15:01:25,857 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2022-05-08 15:01:26,846 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 176417, 'printer_state': 'OPERATIONAL'} 2022-05-08 15:16:25,859 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2022-05-08 15:16:26,858 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 177317, 'printer_state': 'OPERATIONAL'} 2022-05-08 15:17:09,435 - octoprint.startup - INFO - ****************************************************************************** 2022-05-08 15:17:09,440 - octoprint.startup - INFO - Starting OctoPrint 1.7.3 2022-05-08 15:17:09,441 - octoprint.startup - INFO - ****************************************************************************** 2022-05-08 15:17:16,159 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: offline 2022-05-08 15:17:16,160 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 1.1.1.1:53 is not working 2022-05-08 15:17:16,161 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is not working 2022-05-08 15:17:16,172 - octoprint.startup - INFO - We don't appear to be online, not fetching plugin blacklist 2022-05-08 15:17:16,303 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2022-05-08 15:17:19,346 - octoprint.plugin.core - INFO - Plugin Themeify (1.2.2) is disabled. 2022-05-08 15:17:20,179 - octoprint.plugin.core - INFO - Plugin Floating Navbar (0.3.7) is disabled. 2022-05-08 15:17:21,482 - octoprint.plugins.ws281x_led_status - INFO - Detected running on a Raspberry Pi 3 2022-05-08 15:17:21,722 - octoprint.startup - INFO - Added settings overlay from plugin octodashcompanion 2022-05-08 15:17:21,743 - octoprint.plugin.core - INFO - Found 40 plugin(s) providing 38 mixin implementations, 88 hook handlers 2022-05-08 15:17:22,004 - octoprint.server.heartbeat - INFO - Starting server heartbeat, 900.0s interval 2022-05-08 15:17:22,044 - octoprint.server - INFO - Intermediary server started 2022-05-08 15:17:22,078 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/pi/.octoprint/uploads... 2022-05-08 15:17:23,066 - octoprint.filemanager.storage - INFO - ... file metadata for /home/pi/.octoprint/uploads initialized successfully. 2022-05-08 15:17:23,072 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_SHOW (needs: "Need(method='role', value='plugin_action_command_notification_show')") 2022-05-08 15:17:23,073 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_CLEAR (needs: "Need(method='role', value='plugin_action_command_notification_clear')") 2022-05-08 15:17:23,073 - octoprint.server - INFO - Added new permission from plugin action_command_prompt: PLUGIN_ACTION_COMMAND_PROMPT_INTERACT (needs: "Need(method='role', value='plugin_action_command_prompt_interact')") 2022-05-08 15:17:23,074 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_READ (needs: "Need(method='role', value='plugin_announcements_read')") 2022-05-08 15:17:23,074 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_MANAGE (needs: "Need(method='role', value='plugin_announcements_read'), Need(method='role', value='plugin_announcements_manage')") 2022-05-08 15:17:23,075 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_ADMIN (needs: "Need(method='role', value='plugin_appkeys_admin')") 2022-05-08 15:17:23,075 - octoprint.server - INFO - Added new permission from plugin backup: PLUGIN_BACKUP_ACCESS (needs: "Need(method='role', value='plugin_backup_access')") 2022-05-08 15:17:23,076 - octoprint.server - INFO - Added new permission from plugin firmware_check: PLUGIN_FIRMWARE_CHECK_DISPLAY (needs: "Need(method='role', value='plugin_firmware_check_display')") 2022-05-08 15:17:23,076 - octoprint.server - INFO - Added new permission from plugin logging: PLUGIN_LOGGING_MANAGE (needs: "Need(method='role', value='plugin_logging_manage')") 2022-05-08 15:17:23,077 - octoprint.server - INFO - Added new permission from plugin octoapp: PLUGIN_OCTOAPP_RECEIVE_NOTIFICATIONS (needs: "Need(method='role', value='plugin_octoapp_admin')") 2022-05-08 15:17:23,082 - octoprint.server - INFO - Added new permission from plugin octoapp: PLUGIN_OCTOAPP_GET_DATA (needs: "Need(method='role', value='plugin_octoapp_admin')") 2022-05-08 15:17:23,083 - octoprint.server - INFO - Added new permission from plugin octodashcompanion: PLUGIN_OCTODASHCOMPANION_MANAGEBACKUPS (needs: "Need(method='role', value='plugin_octodashcompanion_admin')") 2022-05-08 15:17:23,084 - octoprint.server - INFO - Added new permission from plugin pi_support: PLUGIN_PI_SUPPORT_STATUS (needs: "Need(method='role', value='plugin_pi_support_check')") 2022-05-08 15:17:23,084 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_MANAGE (needs: "Need(method='role', value='plugin_pluginmanager_manage')") 2022-05-08 15:17:23,085 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_INSTALL (needs: "Need(method='role', value='plugin_pluginmanager_install'), Need(method='role', value='plugin_pluginmanager_manage')") 2022-05-08 15:17:23,085 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CHECK (needs: "Need(method='role', value='plugin_softwareupdate_check')") 2022-05-08 15:17:23,085 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_UPDATE (needs: "Need(method='role', value='plugin_softwareupdate_update')") 2022-05-08 15:17:23,086 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CONFIGURE (needs: "Need(method='role', value='plugin_softwareupdate_configure')") 2022-05-08 15:17:23,111 - octoprint.printer.standard - INFO - Using print time estimator provided by PrintTimeGenius 2022-05-08 15:17:24,798 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip 2022-05-08 15:17:25,868 - octoprint.util.pip - INFO - Version of pip is 20.3.3 2022-05-08 15:17:25,870 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-05-08 15:17:25,871 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-05-08 15:17:26,531 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk 2022-05-08 15:17:26,563 - octoprint.plugins.softwareupdate - INFO - Loaded update log from disk 2022-05-08 15:17:26,697 - octoprint.plugins.SpoolManager - INFO - Start initializing 2022-05-08 15:17:26,701 - octoprint.plugins.SpoolManager.DatabaseManager - INFO - Init DatabaseManager 2022-05-08 15:17:26,706 - octoprint.plugins.SpoolManager.DatabaseManager - INFO - Databasefile '/home/pi/.octoprint/data/SpoolManager/spoolmanager.db' exists: True 2022-05-08 15:17:26,766 - octoprint.plugins.SpoolManager.DatabaseManager - INFO - Check if database-scheme upgrade needed... 2022-05-08 15:17:26,792 - octoprint.plugins.SpoolManager.DatabaseManager - INFO - Current databasescheme: 7 2022-05-08 15:17:26,792 - octoprint.plugins.SpoolManager.DatabaseManager - INFO - ...Database-scheme upgraded not needed. 2022-05-08 15:17:26,793 - octoprint.plugins.SpoolManager.DatabaseManager - INFO - Database created-check done 2022-05-08 15:17:26,797 - octoprint.plugins.SpoolManager - INFO - Done initializing 2022-05-08 15:17:26,873 - octoprint.plugins.excluderegion - INFO - Logging mode set to 'octoprint' 2022-05-08 15:17:26,874 - octoprint.plugins.excluderegion - INFO - Setting update detected: g90InfluencesExtruder=False, clearRegionsAfterPrintFinishes=True, mayShrinkRegionsWhilePrinting=False, loggingMode=octoprint, enteringExcludedRegionGcode=None, exitingExcludedRegionGcode=None, extendedExcludeGcodes={'G4': {"gcode": "G4", "mode": "exclude", "description": "Ignore all dwell commands in an excluded area to reduce delays while excluding", "type": "ExcludedGcode"}, 'M117': {"gcode": "M117", "mode": "last", "description": "Suppress display messages while excluding and output the last message encountered when exiting the excluded area", "type": "ExcludedGcode"}, 'M204': {"gcode": "M204", "mode": "merge", "description": "Record default acceleration changes while excluding and apply the most recent values in a single command after exiting the excluded area", "type": "ExcludedGcode"}, 'M205': {"gcode": "M205", "mode": "merge", "description": "Record advanced setting changes while excluding and apply the most recent values in a single command after exiting the excluded area", "type": "ExcludedGcode"}, 'M73': {"gcode": "M73", "mode": "merge", "description": "Suppress progress updates while excluding and output the most recent progress values encountered when exiting the excluded area", "type": "ExcludedGcode"}}, atCommandActions={'ExcludeRegion': [{"command": "ExcludeRegion", "parameterPattern": "^\\s*(enable|on)(\\s|$)", "action": "enable_exclusion", "description": "Default action to enable exclusion", "type": "AtCommandAction"}, {"command": "ExcludeRegion", "parameterPattern": "^\\s*(disable|off)(\\s|$)", "action": "disable_exclusion", "description": "Default action to disable exclusion", "type": "AtCommandAction"}]} 2022-05-08 15:17:26,973 - octoprint.plugin.core - INFO - Initialized 38 plugin implementation(s) 2022-05-08 15:17:27,329 - octoprint.plugin.core - INFO - 40 plugin(s) registered with the system: | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/appkeys | Backup & Restore (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/backup | Backup Scheduler (0.1.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_backupscheduler | Camera Settings (0.3.2) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_CameraSettings | Core Wizard (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/corewizard | Discovery (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/discovery | DisplayLayerProgress Plugin (1.28.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_DisplayLayerProgress | Draggable Files (1.1.2) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_draggable_files | Error Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/errortracking | Event Manager (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/eventmanager | Exclude Region (0.3.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_excluderegion | File Check (2021.2.23) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_file_check | Firmware Check (2021.10.11) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_firmware_check | !Floating Navbar (0.3.7) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_floatingnavbar | GCode Viewer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/gcodeviewer | HeaterTimeout (0.0.4) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_HeaterTimeout | ipOnConnect (0.2.4) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_ipOnConnect | Logging (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/logging | Navbar Temperature Plugin (0.14) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_navbartemp | OctoApp (1.0.10) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_octoapp | OctoDash Companion (0.0.7) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_octodashcompanion | OctoEverywhere! (1.6.6) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_octoeverywhere | Pi Support Plugin (2022.3.28) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/pluginmanager | Preheat Button (0.8.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_preheat | PrintTimeGenius Plugin (2.2.8) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_PrintTimeGenius | Simple Emergency Stop (1.0.5) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_simpleemergencystop | Slicer Thumbnails (1.0.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_prusaslicerthumbnails | Software Update (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/softwareupdate | SpoolManager Plugin (1.7.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_SpoolManager | Terminal Messaging (0.1.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_terminalmessaging | !Themeify (1.2.2) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_themeify | TouchUI (0.3.18) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_touchui | UI Customizer (0.1.8.9) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_uicustomizer | Virtual Printer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/virtual_printer | WS281x LED Status (0.8.1) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_ws281x_led_status Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2022-05-08 15:17:27,386 - octoprint.environment - INFO - Detected environment is Python 3.7.3 under Linux (linux). Details: | hardware: | cores: 4 | freq: 1400.0 | ram: 914010112 | os: | bits: 32 | id: linux | platform: linux | plugins: | pi_support: | model: Raspberry Pi 3 Model B Plus Rev 1.3 | octopi_version: 0.18.0 | throttle_state: '0x0' | python: | pip: 20.3.3 | version: 3.7.3 | virtualenv: /home/pi/oprint 2022-05-08 15:17:27,405 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/webassets... 2022-05-08 15:17:27,438 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-cache... 2022-05-08 15:17:27,623 - octoprint.server.util.flask.collect_plugin_assets - WARNING - Plugin simpleemergencystop is referring to non existing css asset css/fontawesome.all.min.css 2022-05-08 15:17:29,088 - octoprint.server - INFO - Shutting down intermediary server... 2022-05-08 15:17:29,540 - octoprint.server - INFO - Intermediary server shut down 2022-05-08 15:17:29,544 - octoprint.events - INFO - Processing startup event, this is our first event 2022-05-08 15:17:29,544 - octoprint.events - INFO - Adding 1 events to queue that were held back before startup event 2022-05-08 15:17:29,545 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue... 2022-05-08 15:17:29,560 - octoprint.server - INFO - Autoconnect on startup is configured, trying to connect to the printer... 2022-05-08 15:17:29,704 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue 2022-05-08 15:17:29,718 - octoprint.server - INFO - Trying to connect to configured serial port None 2022-05-08 15:17:29,787 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2022-05-08 15:17:29,811 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder... 2022-05-08 15:17:29,819 - octoprint.server.util.watchdog - INFO - ... initial scan done. 2022-05-08 15:17:29,861 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 7 port/baudrate candidates: /dev/ttyACM0@115200, /dev/ttyACM0@250000, /dev/ttyACM0@230400, /dev/ttyACM0@57600, /dev/ttyACM0@38400, /dev/ttyACM0@19200, /dev/ttyACM0@9600 2022-05-08 15:17:29,861 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyACM0, baudrate 115200 2022-05-08 15:17:29,862 - octoprint.util.comm - INFO - Connecting to port /dev/ttyACM0, baudrate 115200 2022-05-08 15:17:29,871 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-05-08 15:17:29,877 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-05-08 15:17:30,661 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on octopi._http._tcp.local.' for _http._tcp.local. 2022-05-08 15:17:30,930 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Operational" 2022-05-08 15:17:31,010 - octoprint.plugins.ipOnConnect - INFO - ipOnConnectPlugin: M117 192.168.0.158 2022-05-08 15:17:31,062 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-05-08 15:17:31,517 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on octopi._octoprint._tcp.local.' for _octoprint._tcp.local. 2022-05-08 15:17:31,534 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance on octopi for SSDP 2022-05-08 15:17:31,587 - octoprint.plugins.octoeverywhere - INFO - OctoPrint port 5000 2022-05-08 15:17:32,402 - octoprint.plugins.octoeverywhere - INFO - OctoPingPong stats loaded from file. 2022-05-08 15:17:32,415 - octoprint.plugins.ws281x_led_status - INFO - Running OS config test (Log mode) 2022-05-08 15:17:32,418 - octoprint.server - INFO - Listening on http://127.0.0.1:5000 2022-05-08 15:17:32,477 - octoprint.plugins.octoeverywhere - INFO - IPV4 - starport:165.22.39.243 main:172.67.154.124 2022-05-08 15:17:32,478 - octoprint.plugins.ws281x_led_status - INFO - OS config test complete. Results: | - adduser: True | - spi_enabled: True | - spi_buffer_increase: True | - set_core_freq: True | - set_core_freq_min: True 2022-05-08 15:17:32,516 - octoprint.plugins.octoeverywhere - INFO - Failed to resolve host ipv6 name [Errno -2] Name or service not known 2022-05-08 15:17:32,604 - octoprint.plugins.pluginmanager - INFO - Looks like we are offline, can't fetch repository from network 2022-05-08 15:17:32,616 - octoprint.plugins.pluginmanager - INFO - Looks like we are offline, can't fetch notices from network 2022-05-08 15:17:33,711 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip 2022-05-08 15:17:33,713 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-05-08 15:17:33,714 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-05-08 15:17:33,723 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 53.0GB. That is considered sufficient for updating. 2022-05-08 15:17:33,724 - octoprint.plugins.softwareupdate - INFO - Not fetching check overlays, we are offline 2022-05-08 15:17:33,898 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity changed from offline to online 2022-05-08 15:17:34,015 - octoprint.plugins.ipOnConnect - INFO - ipOnConnectPlugin: M117 192.168.0.158 2022-05-08 15:17:34,912 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from https://plugins.octoprint.org/plugins.json 2022-05-08 15:32:42,432 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2022-05-08 15:32:42,754 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip 2022-05-08 15:32:42,762 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-05-08 15:32:42,762 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-05-08 15:32:42,895 - octoprint.util.comm - INFO - Printer reports firmware name "Prusa-Firmware 3.10.0 based on Marlin" 2022-05-08 15:32:42,896 - octoprint.util.comm - INFO - Detected Prusa firmware, enabling relevant features for issue free communication 2022-05-08 15:32:42,914 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting 2022-05-08 15:32:43,643 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {'firmware_name': 'Prusa-Firmware 3.10.0 based on Marlin', 'printer_port': None, 'printer_baudrate': 0} 2022-05-08 15:32:45,957 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk 2022-05-08 15:32:46,028 - octoprint.plugins.HeaterTimeout - INFO - Starting up... 2022-05-08 15:32:46,037 - octoprint.plugins.SpoolManager - INFO - Plugin-State: filamentmanager=missing 2022-05-08 15:32:46,065 - octoprint.plugins.octoapp - INFO - OctoApp started, updating config 2022-05-08 15:32:46,073 - octoprint.plugins.ipOnConnect - INFO - ipOnConnectPlugin: M117 192.168.0.158 2022-05-08 15:32:46,077 - octoprint.plugins.octoeverywhere - INFO - After startup called. Starting worker thread. 2022-05-08 15:32:46,101 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2022-05-08 15:32:46,125 - octoprint.plugins.octoeverywhere - INFO - Main thread starting 2022-05-08 15:32:46,137 - octoprint.plugins.uicustomizer - INFO - UI Customizer is initialized. 2022-05-08 15:32:46,260 - octoprint.plugins.ws281x_led_status - INFO - WS281x LED Status runner started 2022-05-08 15:32:46,653 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 19, 'printer_state': 'OPERATIONAL'} 2022-05-08 15:32:47,071 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'http://192.168.0.158/', 'path': '/', 'query_string': 'l10n=en'} 2022-05-08 15:32:47,250 - octoprint.plugins.tracking - INFO - Sent tracking event pong, payload: {'version': '1.7.3', 'os': 'linux', 'bits': 32, 'python': '3.7.3', 'pip': '20.3.3', 'cores': 4, 'freq': 1400.0, 'ram': 914010112, 'pi_model': 'Raspberry Pi 3 Model B Plus Rev 1.3', 'octopi_version': '0.18.0', 'plugins': 'uicustomizer:0.1.8.9,touchui:0.3.18,terminalmessaging:0.1.0,prusaslicerthumbnails:1.0.0,preheat:0.8.0,ws281x_led_status:0.8.1,spoolmanager:1.7.0,simpleemergencystop:1.0.5,printtimegenius:2.2.8,navbartemp:0.14,iponconnect:0.2.4,heatertimeout:0.0.4,excluderegion:0.3.0,draggable_files:1.1.2,camerasettings:0.3.2,octoeverywhere:1.6.6,octodashcompanion:0.0.7,octoapp:1.0.10,displaylayerprogress:1.28.0,backupscheduler:0.1.0'} 2022-05-08 15:32:47,285 - octoprint.plugins.octoapp - INFO - OctoApp loaded config: {'maxUpdateIntervalSecs': 60, 'updatePercentModulus': 5, 'highPrecisionRangeStart': 5, 'highPrecisionRangeEnd': 5, 'sendNotificationUrl': 'https://europe-west1-octoapp-4e438.cloudfunctions.net/sendNotification'} 2022-05-08 15:32:47,543 - octoprint.plugins.octoeverywhere - INFO - Frontend http port detected as 80, is https? False 2022-05-08 15:32:47,562 - octoprint.plugins.octoeverywhere - INFO - Attempting to talk to OctoEverywhere, server con wss://starport-v1.octoeverywhere.com/octoclientws[1] 2022-05-08 15:32:47,825 - octoprint.plugins.tracking - INFO - Sent tracking event startup, payload: {'version': '1.7.3', 'os': 'linux', 'bits': 32, 'python': '3.7.3', 'pip': '20.3.3', 'cores': 4, 'freq': 1400.0, 'ram': 914010112, 'pi_model': 'Raspberry Pi 3 Model B Plus Rev 1.3', 'octopi_version': '0.18.0'} 2022-05-08 15:32:47,933 - octoprint.plugins.octoeverywhere - INFO - Connected To OctoEverywhere, server con wss://starport-v1.octoeverywhere.com/octoclientws[1]. Starting handshake... 2022-05-08 15:32:48,744 - octoprint.plugins.octoeverywhere - INFO - Handshake complete, server con wss://starport-v1.octoeverywhere.com/octoclientws[1], successfully connected to OctoEverywhere! 2022-05-08 15:32:51,899 - octoprint.server.util.flask - INFO - Passively logging in user ssenrah from 127.0.0.1 2022-05-08 15:32:51,900 - octoprint.access.users - INFO - Logged in user: ssenrah 2022-05-08 15:33:21,780 - octoprint.server.preemptive_cache - INFO - ... done in 34.71s 2022-05-08 15:33:21,835 - octoprint.server.views - INFO - Found path / in cache (key: ui:_default:http://192.168.0.158/:en), signaling as cached 2022-05-08 15:33:21,866 - octoprint.server.views - INFO - Found path / in cache (key: ui:_default:http://192.168.0.158/:en), signaling as cached 2022-05-08 15:33:21,898 - octoprint.server.views - INFO - Found path / in cache (key: ui:_default:http://192.168.0.158/:en), signaling as cached 2022-05-08 15:33:21,927 - octoprint.server.views - INFO - Found path / in cache (key: ui:_default:http://192.168.0.158/:en), signaling as cached 2022-05-08 15:33:21,937 - octoprint.plugins.octoeverywhere - INFO - Slipstream Cached [request:35.672, compression:0.134] [854031->127897 14.976%] / 2022-05-08 15:33:21,954 - octoprint.server.util.flask - INFO - Passively logging in user ssenrah from ::ffff:192.168.0.125 2022-05-08 15:33:21,955 - octoprint.access.users - INFO - Logged in user: ssenrah 2022-05-08 15:33:22,096 - octoprint.server.util.flask - INFO - Passively logging in user ssenrah from ::ffff:192.168.0.158 2022-05-08 15:33:22,097 - octoprint.access.users - INFO - Logged in user: ssenrah 2022-05-08 15:33:22,591 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.0.158 2022-05-08 15:33:22,722 - octoprint.plugins.octoeverywhere - INFO - Slipstream Cached [request:0.198, compression:0.527] [1681215->439174 26.122%] /static/webassets/packed_libs.js?1fe9f29c 2022-05-08 15:33:22,746 - octoprint.server.util.sockjs - INFO - User ssenrah logged in on the socket from client ::ffff:192.168.0.158 2022-05-08 15:33:22,811 - octoprint.plugins.octoeverywhere - INFO - Slipstream Cached [request:0.079, compression:0.009] [61454->10163 16.538%] /static/webassets/packed_client.js?b2d27cf4 2022-05-08 15:33:23,082 - octoprint.plugins.octoeverywhere - INFO - SetFrontendLocalPort API called. Port:80 IsHttps:False URL:http://192.168.0.158/#temp 2022-05-08 15:33:23,372 - octoprint.plugins.octoeverywhere - INFO - Slipstream Cached [request:0.166, compression:0.394] [1831937->363566 19.846%] /static/webassets/packed_plugins.js?b0da3832 2022-05-08 15:33:23,615 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 5, 'spoolName': 'Jet Black', 'material': 'PETG', 'colorName': 'black', 'remainingWeight': 763.6781901562279}' to event-bus 2022-05-08 15:33:23,759 - octoprint.plugins.octoeverywhere - INFO - Slipstream Cached [request:0.291, compression:0.094] [513423->118892 23.157%] /static/webassets/packed_core.js?05a5d975 2022-05-08 15:33:23,810 - octoprint.plugins.octoeverywhere - INFO - Slipstream Cached [request:0.020, compression:0.031] [224449->40084 17.859%] /static/webassets/packed_libs.css?e7ff56b9 2022-05-08 15:33:23,848 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.0.125 2022-05-08 15:33:23,861 - octoprint.plugins.octoeverywhere - INFO - Slipstream Cached [request:0.019, compression:0.031] [142951->24568 17.186%] /static/webassets/packed_plugins.css?8c735b7a 2022-05-08 15:33:23,976 - octoprint.plugins.octoeverywhere - INFO - Slipstream Cached [request:0.105, compression:0.010] [103339->12745 12.333%] /static/webassets/packed_core.css?24f52163 2022-05-08 15:33:24,021 - octoprint.plugins.octoeverywhere - INFO - Slipstream Cached [request:0.034, compression:0.010] [78460->78491 100.040%] /static/vendor/font-awesome-5.15.1/webfonts/fa-brands-400.woff2?v=5.15.1 2022-05-08 15:33:24,057 - octoprint.plugins.octoeverywhere - INFO - Slipstream Cached [request:0.025, compression:0.010] [78460->78491 100.040%] /static/vendor/font-awesome-5.15.1/webfonts/fa-brands-400.woff2?v=5.15.1 2022-05-08 15:33:24,086 - octoprint.plugins.octoeverywhere - INFO - Slipstream Cached [request:0.027, compression:0.001] [13548->13559 100.081%] /static/vendor/font-awesome-5.15.1/webfonts/fa-regular-400.woff2?v=5.15.1 2022-05-08 15:33:24,111 - octoprint.server.util.flask - INFO - Passively logging in user ssenrah from ::ffff:192.168.0.125 2022-05-08 15:33:24,112 - octoprint.access.users - INFO - Logged in user: ssenrah 2022-05-08 15:33:24,142 - octoprint.plugins.octoeverywhere - INFO - Slipstream Cached [request:0.054, compression:0.001] [13548->13559 100.081%] /static/vendor/font-awesome-5.15.1/webfonts/fa-regular-400.woff2?v=5.15.1 2022-05-08 15:33:24,202 - octoprint.plugins.octoeverywhere - INFO - Slipstream Cached [request:0.031, compression:0.028] [80300->80263 99.954%] /static/vendor/font-awesome-5.15.1/webfonts/fa-solid-900.woff2?v=5.15.1 2022-05-08 15:33:25,012 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2022-05-08 15:33:25,014 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://octopi.local:80/', 'accessToken': '1F3B7A663FB44EDCBDEF767FF98296E8'}, 'printer': {'name': 'Prusa MK3S+', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 185, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 30, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 15, 'useM600': True}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': False}, 'spoolManager': {'enabled': True}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'color': '#dcdde1', 'command': 'G28', 'confirm': False, 'exit': True, 'icon': 'home'}, {'color': '#4bae50', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/webcam', 'confirm': False, 'exit': False, 'icon': 'camera'}, {'color': '#e1b12c', 'command': 'M140 S50; M104 S185', 'confirm': False, 'exit': True, 'icon': 'fire-alt'}, {'color': '#0097e6', 'command': 'M140 S0; M104 S0', 'confirm': False, 'exit': True, 'icon': 'snowflake'}, {'color': '#0097e6', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/sleep', 'confirm': False, 'exit': False, 'icon': 'bed'}, {'color': '#FF0000', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/restart', 'confirm': True, 'exit': False, 'icon': 'power-off'}], 'fileSorting': {'attribute': 'date', 'order': 'dsc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': True, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2022-05-08 15:33:25,884 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 5, 'spoolName': 'Jet Black', 'material': 'PETG', 'colorName': 'black', 'remainingWeight': 763.6781901562279}' to event-bus 2022-05-08 15:33:25,985 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 5, 'spoolName': 'Jet Black', 'material': 'PETG', 'colorName': 'black', 'remainingWeight': 763.6781901562279}' to event-bus 2022-05-08 15:33:26,375 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2022-05-08 15:33:26,379 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://octopi.local:80/', 'accessToken': '1F3B7A663FB44EDCBDEF767FF98296E8'}, 'printer': {'name': 'Prusa MK3S+', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 185, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 30, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 15, 'useM600': True}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': False}, 'spoolManager': {'enabled': True}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'color': '#dcdde1', 'command': 'G28', 'confirm': False, 'exit': True, 'icon': 'home'}, {'color': '#4bae50', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/webcam', 'confirm': False, 'exit': False, 'icon': 'camera'}, {'color': '#e1b12c', 'command': 'M140 S50; M104 S185', 'confirm': False, 'exit': True, 'icon': 'fire-alt'}, {'color': '#0097e6', 'command': 'M140 S0; M104 S0', 'confirm': False, 'exit': True, 'icon': 'snowflake'}, {'color': '#0097e6', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/sleep', 'confirm': False, 'exit': False, 'icon': 'bed'}, {'color': '#FF0000', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/restart', 'confirm': True, 'exit': False, 'icon': 'power-off'}], 'fileSorting': {'attribute': 'date', 'order': 'dsc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': True, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2022-05-08 15:33:26,654 - octoprint.plugins.octoeverywhere - INFO - Slipstream Cached [request:2.441, compression:0.011] [80300->80263 99.954%] /static/vendor/font-awesome-5.15.1/webfonts/fa-solid-900.woff2?v=5.15.1 2022-05-08 15:33:26,694 - octoprint.plugins.octoeverywhere - INFO - Slipstream Cached [request:0.033, compression:0.006] [43572->43565 99.984%] /static/vendor/font-awesome-3.2.1/fonts/fontawesome-webfont.woff?v=3.2.1 2022-05-08 15:33:26,694 - octoprint.plugins.octoeverywhere - INFO - Slipstream took 40.56385111808777 to fully update the cache 2022-05-08 15:33:27,572 - octoprint.server.util.sockjs - INFO - User ssenrah logged in on the socket from client ::ffff:192.168.0.125 2022-05-08 15:33:27,656 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 5, 'spoolName': 'Jet Black', 'material': 'PETG', 'colorName': 'black', 'remainingWeight': 763.6781901562279}' to event-bus 2022-05-08 15:33:27,741 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 5, 'spoolName': 'Jet Black', 'material': 'PETG', 'colorName': 'black', 'remainingWeight': 763.6781901562279}' to event-bus 2022-05-08 15:33:27,818 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 5, 'spoolName': 'Jet Black', 'material': 'PETG', 'colorName': 'black', 'remainingWeight': 763.6781901562279}' to event-bus 2022-05-08 15:33:27,905 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 5, 'spoolName': 'Jet Black', 'material': 'PETG', 'colorName': 'black', 'remainingWeight': 763.6781901562279}' to event-bus 2022-05-08 15:33:27,995 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 5, 'spoolName': 'Jet Black', 'material': 'PETG', 'colorName': 'black', 'remainingWeight': 763.6781901562279}' to event-bus 2022-05-08 15:33:29,065 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 5, 'spoolName': 'Jet Black', 'material': 'PETG', 'colorName': 'black', 'remainingWeight': 763.6781901562279}' to event-bus 2022-05-08 15:33:29,120 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 5, 'spoolName': 'Jet Black', 'material': 'PETG', 'colorName': 'black', 'remainingWeight': 763.6781901562279}' to event-bus 2022-05-08 15:33:30,899 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2022-05-08 15:33:30,902 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://octopi.local:80/', 'accessToken': '1F3B7A663FB44EDCBDEF767FF98296E8'}, 'printer': {'name': 'Prusa MK3S+', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 185, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 30, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 15, 'useM600': True}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': False}, 'spoolManager': {'enabled': True}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'color': '#dcdde1', 'command': 'G28', 'confirm': False, 'exit': True, 'icon': 'home'}, {'color': '#4bae50', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/webcam', 'confirm': False, 'exit': False, 'icon': 'camera'}, {'color': '#e1b12c', 'command': 'M140 S50; M104 S185', 'confirm': False, 'exit': True, 'icon': 'fire-alt'}, {'color': '#0097e6', 'command': 'M140 S0; M104 S0', 'confirm': False, 'exit': True, 'icon': 'snowflake'}, {'color': '#0097e6', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/sleep', 'confirm': False, 'exit': False, 'icon': 'bed'}, {'color': '#FF0000', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/restart', 'confirm': True, 'exit': False, 'icon': 'power-off'}], 'fileSorting': {'attribute': 'date', 'order': 'dsc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': True, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2022-05-08 15:33:32,210 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2022-05-08 15:33:32,212 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://octopi.local:80/', 'accessToken': '1F3B7A663FB44EDCBDEF767FF98296E8'}, 'printer': {'name': 'Prusa MK3S+', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 185, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 30, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 15, 'useM600': True}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': False}, 'spoolManager': {'enabled': True}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'color': '#dcdde1', 'command': 'G28', 'confirm': False, 'exit': True, 'icon': 'home'}, {'color': '#4bae50', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/webcam', 'confirm': False, 'exit': False, 'icon': 'camera'}, {'color': '#e1b12c', 'command': 'M140 S50; M104 S185', 'confirm': False, 'exit': True, 'icon': 'fire-alt'}, {'color': '#0097e6', 'command': 'M140 S0; M104 S0', 'confirm': False, 'exit': True, 'icon': 'snowflake'}, {'color': '#0097e6', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/sleep', 'confirm': False, 'exit': False, 'icon': 'bed'}, {'color': '#FF0000', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/restart', 'confirm': True, 'exit': False, 'icon': 'power-off'}], 'fileSorting': {'attribute': 'date', 'order': 'dsc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': True, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2022-05-08 15:33:32,578 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 5, 'spoolName': 'Jet Black', 'material': 'PETG', 'colorName': 'black', 'remainingWeight': 763.6781901562279}' to event-bus 2022-05-08 15:33:32,729 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 5, 'spoolName': 'Jet Black', 'material': 'PETG', 'colorName': 'black', 'remainingWeight': 763.6781901562279}' to event-bus 2022-05-08 15:33:32,993 - octoprint.plugins.tracking - INFO - Sent tracking event webui_load, payload: {'browser_name': 'Chrome', 'browser_version': '101.0.4951.54', 'os_name': 'Windows', 'os_version': '10'} 2022-05-08 15:33:39,422 - octoprint.plugins.octoeverywhere - INFO - Updating server latencies... 2022-05-08 15:33:44,657 - octoprint.plugins.octoeverywhere - INFO - Server Latency Computed. Default:nyc latency:70.09131908416748; Lowest Latency:nyc latency:70.09131908416748 2022-05-08 15:34:02,911 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 5, 'spoolName': 'Jet Black', 'material': 'PETG', 'colorName': 'black', 'remainingWeight': 763.6781901562279}' to event-bus 2022-05-08 15:34:16,474 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 5, 'spoolName': 'Jet Black', 'material': 'PETG', 'colorName': 'black', 'remainingWeight': 763.6781901562279}' to event-bus 2022-05-08 15:34:24,085 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 5, 'spoolName': 'Jet Black', 'material': 'PETG', 'colorName': 'black', 'remainingWeight': 763.6781901562279}' to event-bus 2022-05-08 15:34:35,389 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 5, 'spoolName': 'Jet Black', 'material': 'PETG', 'colorName': 'black', 'remainingWeight': 763.6781901562279}' to event-bus 2022-05-08 15:34:39,701 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 5, 'spoolName': 'Jet Black', 'material': 'PETG', 'colorName': 'black', 'remainingWeight': 763.6781901562279}' to event-bus 2022-05-08 15:34:47,827 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 5, 'spoolName': 'Jet Black', 'material': 'PETG', 'colorName': 'black', 'remainingWeight': 763.6781901562279}' to event-bus 2022-05-08 15:34:54,880 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 5, 'spoolName': 'Jet Black', 'material': 'PETG', 'colorName': 'black', 'remainingWeight': 763.6781901562279}' to event-bus 2022-05-08 15:35:04,222 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 5, 'spoolName': 'Jet Black', 'material': 'PETG', 'colorName': 'black', 'remainingWeight': 763.6781901562279}' to event-bus 2022-05-08 15:42:16,088 - octoprint.plugins.HeaterTimeout - INFO - Timer Started: 1652042536 2022-05-08 15:43:56,327 - octoprint.util.comm - INFO - Printer seems to support the busy protocol, will adjust timeouts and set busy interval accordingly 2022-05-08 15:43:56,345 - octoprint.util.comm - INFO - Telling the printer to set the busy interval to our "communicationBusy" timeout - 1s = 2s 2022-05-08 15:43:56,423 - octoprint.util.comm - INFO - Got a resend request from the printer: requested line = 0, current line = 2 | Last lines in terminal: | Recv: echo:endstops hit: X:0.01 | Send: G90 | Recv: ok | Send: G91 | Recv: ok | Send: G0 X10 Y0 Z0 F9000 | Recv: ok | Send: G90 | Recv: echo:endstops hit: X:0.02 | Recv: ok | Recv: T:220.1 /230.0 B:64.4 /85.0 T0:220.1 /230.0 @:76 B@:127 P:0.0 A:39.0 | Recv: echo:enqueing "M702" | Recv: LCD status changed | Recv: T:223.0 /230.0 B:65.0 /85.0 T0:223.0 /230.0 @:55 B@:127 P:0.0 A:39.3 | Recv: echo:busy: processing | Printer seems to support the busy protocol, will adjust timeouts and set busy interval accordingly | Send: M113 S2 | Recv: fsensor_checkpoint_print | Recv: ok | Recv: Resend: 0 2022-05-08 15:43:56,434 - octoprint.plugins.octoeverywhere - INFO - Fireing On Filament Change Notification From GcodeReceived: fsensor_update - M600 2022-05-08 15:43:56,438 - octoprint.plugins.octoeverywhere - ERROR - Failed to find time estimate from OctoPrint. int() argument must be a string, a bytes-like object or a number, not 'NoneType' 2022-05-08 15:43:56,440 - octoprint.plugins.octoeverywhere - INFO - Fireing On Filament Change Notification From GcodeReceived: echo:Enqueing to the front: "M600" 2022-05-08 15:43:56,443 - octoprint.plugins.octoeverywhere - ERROR - Failed to find time estimate from OctoPrint. int() argument must be a string, a bytes-like object or a number, not 'NoneType' 2022-05-08 15:43:57,332 - octoprint.plugins.octoeverywhere - INFO - NotificationsHandler successfully sent 'filamentchange'; ETA: -1 2022-05-08 15:44:08,606 - octoprint.plugins.octoeverywhere - INFO - Fireing On User Interaction Required From GcodeReceived: echo:busy: paused for user 2022-05-08 15:44:10,712 - octoprint.plugins.octoeverywhere - INFO - Fireing On User Interaction Required From GcodeReceived: echo:busy: paused for user 2022-05-08 15:44:13,509 - octoprint.plugins.octoeverywhere - INFO - Fireing On User Interaction Required From GcodeReceived: echo:busy: paused for user 2022-05-08 15:44:15,626 - octoprint.plugins.octoeverywhere - INFO - Fireing On User Interaction Required From GcodeReceived: echo:busy: paused for user 2022-05-08 15:44:17,745 - octoprint.plugins.octoeverywhere - INFO - Fireing On User Interaction Required From GcodeReceived: echo:busy: paused for user 2022-05-08 15:44:19,924 - octoprint.plugins.octoeverywhere - INFO - Fireing On User Interaction Required From GcodeReceived: echo:busy: paused for user 2022-05-08 15:44:22,021 - octoprint.plugins.octoeverywhere - INFO - Fireing On User Interaction Required From GcodeReceived: echo:busy: paused for user 2022-05-08 15:44:24,905 - octoprint.util.comm - WARNING - Printer sent 'start' while already operational. External reset? Resetting line numbers to be on the safe side 2022-05-08 15:44:34,490 - octoprint.util.comm - INFO - Communication timeout during an active resend, resending same line again to trigger response from printer. 2022-05-08 15:44:34,491 - octoprint.util.comm - WARNING - Should resend line -2 but no sufficient history is available, can't resend. Line to resend is -2, current line is 0, line history has 0 entries. 2022-05-08 15:44:37,503 - octoprint.util.comm - INFO - Communication timeout during an active resend, resending same line again to trigger response from printer. 2022-05-08 15:44:37,504 - octoprint.util.comm - WARNING - Should resend line -1 but no sufficient history is available, can't resend. Line to resend is -1, current line is 0, line history has 0 entries. 2022-05-08 15:44:40,512 - octoprint.util.comm - INFO - No response from printer after 3 consecutive communication timeouts, considering it dead. 2022-05-08 15:44:40,529 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Offline after error" 2022-05-08 15:44:40,595 - octoprint.plugins.excluderegion - INFO - Printing stopped: event=Error 2022-05-08 15:44:40,613 - octoprint.plugins.octoeverywhere - ERROR - Failed to find time estimate from OctoPrint. int() argument must be a string, a bytes-like object or a number, not 'NoneType' 2022-05-08 15:44:40,614 - octoprint.plugins.octoeverywhere - ERROR - Failed to find time estimate from OctoPrint. int() argument must be a string, a bytes-like object or a number, not 'NoneType' 2022-05-08 15:44:40,634 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2022-05-08 15:44:41,126 - octoprint.plugins.tracking - INFO - Sent tracking event commerror_timeout, payload: {'commerror_text': 'Too many consecutive timeouts, printer still connected and alive?'} 2022-05-08 15:44:41,428 - octoprint.plugins.octoeverywhere - INFO - NotificationsHandler successfully sent 'error'; ETA: -1 2022-05-08 15:44:44,897 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2022-05-08 15:44:44,960 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 7 port/baudrate candidates: /dev/ttyACM0@115200, /dev/ttyACM0@250000, /dev/ttyACM0@230400, /dev/ttyACM0@57600, /dev/ttyACM0@38400, /dev/ttyACM0@19200, /dev/ttyACM0@9600 2022-05-08 15:44:44,961 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyACM0, baudrate 115200 2022-05-08 15:44:44,962 - octoprint.util.comm - INFO - Connecting to port /dev/ttyACM0, baudrate 115200 2022-05-08 15:44:44,994 - octoprint.util.comm - ERROR - Unexpected error while connecting to serial port /dev/ttyACM0, baudrate 115200 from hook default: SerialException: '[Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable' @ comm.py:_open_serial:3779 Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 385, in _reconfigure_port fcntl.flock(self.fd, fcntl.LOCK_EX | fcntl.LOCK_NB) BlockingIOError: [Errno 11] Resource temporarily unavailable During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3779, in _open_serial settings().getFloat(["serial", "timeout", "connection"]), File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3740, in default serial_obj.open() File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 332, in open self._reconfigure_port(force_update=True) File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 387, in _reconfigure_port raise SerialException(msg.errno, "Could not exclusively lock port {}: {}".format(self._port, msg)) serial.serialutil.SerialException: [Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable 2022-05-08 15:44:44,994 - octoprint.util.comm - INFO - Serial detection: Could not open port /dev/ttyACM0, baudrate 115200, skipping 2022-05-08 15:44:44,995 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyACM0, baudrate 250000 2022-05-08 15:44:44,996 - octoprint.util.comm - INFO - Connecting to port /dev/ttyACM0, baudrate 250000 2022-05-08 15:44:45,004 - octoprint.util.comm - ERROR - Unexpected error while connecting to serial port /dev/ttyACM0, baudrate 250000 from hook default: SerialException: '[Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable' @ comm.py:_open_serial:3779 Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 385, in _reconfigure_port fcntl.flock(self.fd, fcntl.LOCK_EX | fcntl.LOCK_NB) BlockingIOError: [Errno 11] Resource temporarily unavailable During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3779, in _open_serial settings().getFloat(["serial", "timeout", "connection"]), File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3740, in default serial_obj.open() File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 332, in open self._reconfigure_port(force_update=True) File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 387, in _reconfigure_port raise SerialException(msg.errno, "Could not exclusively lock port {}: {}".format(self._port, msg)) serial.serialutil.SerialException: [Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable 2022-05-08 15:44:45,004 - octoprint.util.comm - INFO - Serial detection: Could not open port /dev/ttyACM0, baudrate 250000, skipping 2022-05-08 15:44:45,005 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyACM0, baudrate 230400 2022-05-08 15:44:45,007 - octoprint.util.comm - INFO - Connecting to port /dev/ttyACM0, baudrate 230400 2022-05-08 15:44:45,018 - octoprint.util.comm - ERROR - Unexpected error while connecting to serial port /dev/ttyACM0, baudrate 230400 from hook default: SerialException: '[Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable' @ comm.py:_open_serial:3779 Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 385, in _reconfigure_port fcntl.flock(self.fd, fcntl.LOCK_EX | fcntl.LOCK_NB) BlockingIOError: [Errno 11] Resource temporarily unavailable During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3779, in _open_serial settings().getFloat(["serial", "timeout", "connection"]), File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3740, in default serial_obj.open() File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 332, in open self._reconfigure_port(force_update=True) File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 387, in _reconfigure_port raise SerialException(msg.errno, "Could not exclusively lock port {}: {}".format(self._port, msg)) serial.serialutil.SerialException: [Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable 2022-05-08 15:44:45,018 - octoprint.util.comm - INFO - Serial detection: Could not open port /dev/ttyACM0, baudrate 230400, skipping 2022-05-08 15:44:45,019 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyACM0, baudrate 57600 2022-05-08 15:44:45,020 - octoprint.util.comm - INFO - Connecting to port /dev/ttyACM0, baudrate 57600 2022-05-08 15:44:45,029 - octoprint.util.comm - ERROR - Unexpected error while connecting to serial port /dev/ttyACM0, baudrate 57600 from hook default: SerialException: '[Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable' @ comm.py:_open_serial:3779 Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 385, in _reconfigure_port fcntl.flock(self.fd, fcntl.LOCK_EX | fcntl.LOCK_NB) BlockingIOError: [Errno 11] Resource temporarily unavailable During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3779, in _open_serial settings().getFloat(["serial", "timeout", "connection"]), File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3740, in default serial_obj.open() File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 332, in open self._reconfigure_port(force_update=True) File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 387, in _reconfigure_port raise SerialException(msg.errno, "Could not exclusively lock port {}: {}".format(self._port, msg)) serial.serialutil.SerialException: [Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable 2022-05-08 15:44:45,030 - octoprint.util.comm - INFO - Serial detection: Could not open port /dev/ttyACM0, baudrate 57600, skipping 2022-05-08 15:44:45,033 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyACM0, baudrate 38400 2022-05-08 15:44:45,037 - octoprint.util.comm - INFO - Connecting to port /dev/ttyACM0, baudrate 38400 2022-05-08 15:44:45,042 - octoprint.util.comm - ERROR - Unexpected error while connecting to serial port /dev/ttyACM0, baudrate 38400 from hook default: SerialException: '[Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable' @ comm.py:_open_serial:3779 Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 385, in _reconfigure_port fcntl.flock(self.fd, fcntl.LOCK_EX | fcntl.LOCK_NB) BlockingIOError: [Errno 11] Resource temporarily unavailable During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3779, in _open_serial settings().getFloat(["serial", "timeout", "connection"]), File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3740, in default serial_obj.open() File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 332, in open self._reconfigure_port(force_update=True) File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 387, in _reconfigure_port raise SerialException(msg.errno, "Could not exclusively lock port {}: {}".format(self._port, msg)) serial.serialutil.SerialException: [Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable 2022-05-08 15:44:45,046 - octoprint.util.comm - INFO - Serial detection: Could not open port /dev/ttyACM0, baudrate 38400, skipping 2022-05-08 15:44:45,047 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyACM0, baudrate 19200 2022-05-08 15:44:45,048 - octoprint.util.comm - INFO - Connecting to port /dev/ttyACM0, baudrate 19200 2022-05-08 15:44:45,060 - octoprint.util.comm - ERROR - Unexpected error while connecting to serial port /dev/ttyACM0, baudrate 19200 from hook default: SerialException: '[Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable' @ comm.py:_open_serial:3779 Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 385, in _reconfigure_port fcntl.flock(self.fd, fcntl.LOCK_EX | fcntl.LOCK_NB) BlockingIOError: [Errno 11] Resource temporarily unavailable During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3779, in _open_serial settings().getFloat(["serial", "timeout", "connection"]), File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3740, in default serial_obj.open() File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 332, in open self._reconfigure_port(force_update=True) File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 387, in _reconfigure_port raise SerialException(msg.errno, "Could not exclusively lock port {}: {}".format(self._port, msg)) serial.serialutil.SerialException: [Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable 2022-05-08 15:44:45,061 - octoprint.util.comm - INFO - Serial detection: Could not open port /dev/ttyACM0, baudrate 19200, skipping 2022-05-08 15:44:45,062 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyACM0, baudrate 9600 2022-05-08 15:44:45,063 - octoprint.util.comm - INFO - Connecting to port /dev/ttyACM0, baudrate 9600 2022-05-08 15:44:45,075 - octoprint.util.comm - ERROR - Unexpected error while connecting to serial port /dev/ttyACM0, baudrate 9600 from hook default: SerialException: '[Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable' @ comm.py:_open_serial:3779 Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 385, in _reconfigure_port fcntl.flock(self.fd, fcntl.LOCK_EX | fcntl.LOCK_NB) BlockingIOError: [Errno 11] Resource temporarily unavailable During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3779, in _open_serial settings().getFloat(["serial", "timeout", "connection"]), File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3740, in default serial_obj.open() File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 332, in open self._reconfigure_port(force_update=True) File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 387, in _reconfigure_port raise SerialException(msg.errno, "Could not exclusively lock port {}: {}".format(self._port, msg)) serial.serialutil.SerialException: [Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable 2022-05-08 15:44:45,076 - octoprint.util.comm - INFO - Serial detection: Could not open port /dev/ttyACM0, baudrate 9600, skipping 2022-05-08 15:44:45,077 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Error" 2022-05-08 15:44:45,079 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2022-05-08 15:44:45,159 - octoprint.plugins.excluderegion - INFO - Printing stopped: event=Error 2022-05-08 15:44:45,186 - octoprint.plugins.octoeverywhere - ERROR - Failed to find time estimate from OctoPrint. int() argument must be a string, a bytes-like object or a number, not 'NoneType' 2022-05-08 15:44:45,196 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2022-05-08 15:44:45,198 - octoprint.plugins.octoeverywhere - ERROR - Failed to find time estimate from OctoPrint. int() argument must be a string, a bytes-like object or a number, not 'NoneType' 2022-05-08 15:44:45,674 - octoprint.plugins.tracking - INFO - Sent tracking event commerror_autodetect, payload: {'commerror_text': 'No more candidates to test, and no working port/baudrate combination detected.'} 2022-05-08 15:44:45,965 - octoprint.plugins.octoeverywhere - INFO - NotificationsHandler successfully sent 'error'; ETA: -1 2022-05-08 15:45:44,141 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2022-05-08 15:45:44,207 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 7 port/baudrate candidates: /dev/ttyACM0@115200, /dev/ttyACM0@250000, /dev/ttyACM0@230400, /dev/ttyACM0@57600, /dev/ttyACM0@38400, /dev/ttyACM0@19200, /dev/ttyACM0@9600 2022-05-08 15:45:44,208 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyACM0, baudrate 115200 2022-05-08 15:45:44,209 - octoprint.util.comm - INFO - Connecting to port /dev/ttyACM0, baudrate 115200 2022-05-08 15:45:44,214 - octoprint.util.comm - ERROR - Unexpected error while connecting to serial port /dev/ttyACM0, baudrate 115200 from hook default: SerialException: '[Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable' @ comm.py:_open_serial:3779 Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 385, in _reconfigure_port fcntl.flock(self.fd, fcntl.LOCK_EX | fcntl.LOCK_NB) BlockingIOError: [Errno 11] Resource temporarily unavailable During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3779, in _open_serial settings().getFloat(["serial", "timeout", "connection"]), File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3740, in default serial_obj.open() File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 332, in open self._reconfigure_port(force_update=True) File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 387, in _reconfigure_port raise SerialException(msg.errno, "Could not exclusively lock port {}: {}".format(self._port, msg)) serial.serialutil.SerialException: [Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable 2022-05-08 15:45:44,216 - octoprint.util.comm - INFO - Serial detection: Could not open port /dev/ttyACM0, baudrate 115200, skipping 2022-05-08 15:45:44,221 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyACM0, baudrate 250000 2022-05-08 15:45:44,223 - octoprint.util.comm - INFO - Connecting to port /dev/ttyACM0, baudrate 250000 2022-05-08 15:45:44,227 - octoprint.util.comm - ERROR - Unexpected error while connecting to serial port /dev/ttyACM0, baudrate 250000 from hook default: SerialException: '[Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable' @ comm.py:_open_serial:3779 Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 385, in _reconfigure_port fcntl.flock(self.fd, fcntl.LOCK_EX | fcntl.LOCK_NB) BlockingIOError: [Errno 11] Resource temporarily unavailable During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3779, in _open_serial settings().getFloat(["serial", "timeout", "connection"]), File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3740, in default serial_obj.open() File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 332, in open self._reconfigure_port(force_update=True) File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 387, in _reconfigure_port raise SerialException(msg.errno, "Could not exclusively lock port {}: {}".format(self._port, msg)) serial.serialutil.SerialException: [Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable 2022-05-08 15:45:44,228 - octoprint.util.comm - INFO - Serial detection: Could not open port /dev/ttyACM0, baudrate 250000, skipping 2022-05-08 15:45:44,228 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyACM0, baudrate 230400 2022-05-08 15:45:44,229 - octoprint.util.comm - INFO - Connecting to port /dev/ttyACM0, baudrate 230400 2022-05-08 15:45:44,236 - octoprint.util.comm - ERROR - Unexpected error while connecting to serial port /dev/ttyACM0, baudrate 230400 from hook default: SerialException: '[Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable' @ comm.py:_open_serial:3779 Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 385, in _reconfigure_port fcntl.flock(self.fd, fcntl.LOCK_EX | fcntl.LOCK_NB) BlockingIOError: [Errno 11] Resource temporarily unavailable During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3779, in _open_serial settings().getFloat(["serial", "timeout", "connection"]), File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3740, in default serial_obj.open() File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 332, in open self._reconfigure_port(force_update=True) File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 387, in _reconfigure_port raise SerialException(msg.errno, "Could not exclusively lock port {}: {}".format(self._port, msg)) serial.serialutil.SerialException: [Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable 2022-05-08 15:45:44,238 - octoprint.util.comm - INFO - Serial detection: Could not open port /dev/ttyACM0, baudrate 230400, skipping 2022-05-08 15:45:44,242 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyACM0, baudrate 57600 2022-05-08 15:45:44,246 - octoprint.util.comm - INFO - Connecting to port /dev/ttyACM0, baudrate 57600 2022-05-08 15:45:44,254 - octoprint.util.comm - ERROR - Unexpected error while connecting to serial port /dev/ttyACM0, baudrate 57600 from hook default: SerialException: '[Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable' @ comm.py:_open_serial:3779 Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 385, in _reconfigure_port fcntl.flock(self.fd, fcntl.LOCK_EX | fcntl.LOCK_NB) BlockingIOError: [Errno 11] Resource temporarily unavailable During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3779, in _open_serial settings().getFloat(["serial", "timeout", "connection"]), File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3740, in default serial_obj.open() File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 332, in open self._reconfigure_port(force_update=True) File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 387, in _reconfigure_port raise SerialException(msg.errno, "Could not exclusively lock port {}: {}".format(self._port, msg)) serial.serialutil.SerialException: [Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable 2022-05-08 15:45:44,255 - octoprint.util.comm - INFO - Serial detection: Could not open port /dev/ttyACM0, baudrate 57600, skipping 2022-05-08 15:45:44,256 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyACM0, baudrate 38400 2022-05-08 15:45:44,258 - octoprint.util.comm - INFO - Connecting to port /dev/ttyACM0, baudrate 38400 2022-05-08 15:45:44,266 - octoprint.util.comm - ERROR - Unexpected error while connecting to serial port /dev/ttyACM0, baudrate 38400 from hook default: SerialException: '[Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable' @ comm.py:_open_serial:3779 Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 385, in _reconfigure_port fcntl.flock(self.fd, fcntl.LOCK_EX | fcntl.LOCK_NB) BlockingIOError: [Errno 11] Resource temporarily unavailable During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3779, in _open_serial settings().getFloat(["serial", "timeout", "connection"]), File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3740, in default serial_obj.open() File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 332, in open self._reconfigure_port(force_update=True) File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 387, in _reconfigure_port raise SerialException(msg.errno, "Could not exclusively lock port {}: {}".format(self._port, msg)) serial.serialutil.SerialException: [Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable 2022-05-08 15:45:44,268 - octoprint.util.comm - INFO - Serial detection: Could not open port /dev/ttyACM0, baudrate 38400, skipping 2022-05-08 15:45:44,269 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyACM0, baudrate 19200 2022-05-08 15:45:44,270 - octoprint.util.comm - INFO - Connecting to port /dev/ttyACM0, baudrate 19200 2022-05-08 15:45:44,278 - octoprint.util.comm - ERROR - Unexpected error while connecting to serial port /dev/ttyACM0, baudrate 19200 from hook default: SerialException: '[Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable' @ comm.py:_open_serial:3779 Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 385, in _reconfigure_port fcntl.flock(self.fd, fcntl.LOCK_EX | fcntl.LOCK_NB) BlockingIOError: [Errno 11] Resource temporarily unavailable During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3779, in _open_serial settings().getFloat(["serial", "timeout", "connection"]), File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3740, in default serial_obj.open() File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 332, in open self._reconfigure_port(force_update=True) File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 387, in _reconfigure_port raise SerialException(msg.errno, "Could not exclusively lock port {}: {}".format(self._port, msg)) serial.serialutil.SerialException: [Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable 2022-05-08 15:45:44,278 - octoprint.util.comm - INFO - Serial detection: Could not open port /dev/ttyACM0, baudrate 19200, skipping 2022-05-08 15:45:44,279 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyACM0, baudrate 9600 2022-05-08 15:45:44,280 - octoprint.util.comm - INFO - Connecting to port /dev/ttyACM0, baudrate 9600 2022-05-08 15:45:44,293 - octoprint.util.comm - ERROR - Unexpected error while connecting to serial port /dev/ttyACM0, baudrate 9600 from hook default: SerialException: '[Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable' @ comm.py:_open_serial:3779 Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 385, in _reconfigure_port fcntl.flock(self.fd, fcntl.LOCK_EX | fcntl.LOCK_NB) BlockingIOError: [Errno 11] Resource temporarily unavailable During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3779, in _open_serial settings().getFloat(["serial", "timeout", "connection"]), File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3740, in default serial_obj.open() File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 332, in open self._reconfigure_port(force_update=True) File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 387, in _reconfigure_port raise SerialException(msg.errno, "Could not exclusively lock port {}: {}".format(self._port, msg)) serial.serialutil.SerialException: [Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable 2022-05-08 15:45:44,294 - octoprint.util.comm - INFO - Serial detection: Could not open port /dev/ttyACM0, baudrate 9600, skipping 2022-05-08 15:45:44,296 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Error" 2022-05-08 15:45:44,305 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2022-05-08 15:45:44,381 - octoprint.plugins.excluderegion - INFO - Printing stopped: event=Error 2022-05-08 15:45:44,388 - octoprint.plugins.octoeverywhere - ERROR - Failed to find time estimate from OctoPrint. int() argument must be a string, a bytes-like object or a number, not 'NoneType' 2022-05-08 15:45:44,389 - octoprint.plugins.octoeverywhere - ERROR - Failed to find time estimate from OctoPrint. int() argument must be a string, a bytes-like object or a number, not 'NoneType' 2022-05-08 15:45:44,421 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2022-05-08 15:45:44,895 - octoprint.plugins.tracking - INFO - Sent tracking event commerror_autodetect, payload: {'commerror_text': 'No more candidates to test, and no working port/baudrate combination detected.'} 2022-05-08 15:45:45,205 - octoprint.plugins.octoeverywhere - INFO - NotificationsHandler successfully sent 'error'; ETA: -1 2022-05-08 15:47:42,433 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2022-05-08 15:47:46,505 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 919, 'printer_state': 'OFFLINE'} 2022-05-08 15:56:13,117 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2022-05-08 15:56:13,179 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 7 port/baudrate candidates: /dev/ttyACM0@115200, /dev/ttyACM0@250000, /dev/ttyACM0@230400, /dev/ttyACM0@57600, /dev/ttyACM0@38400, /dev/ttyACM0@19200, /dev/ttyACM0@9600 2022-05-08 15:56:13,180 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyACM0, baudrate 115200 2022-05-08 15:56:13,185 - octoprint.util.comm - INFO - Connecting to port /dev/ttyACM0, baudrate 115200 2022-05-08 15:56:13,192 - octoprint.util.comm - ERROR - Unexpected error while connecting to serial port /dev/ttyACM0, baudrate 115200 from hook default: SerialException: '[Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable' @ comm.py:_open_serial:3779 Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 385, in _reconfigure_port fcntl.flock(self.fd, fcntl.LOCK_EX | fcntl.LOCK_NB) BlockingIOError: [Errno 11] Resource temporarily unavailable During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3779, in _open_serial settings().getFloat(["serial", "timeout", "connection"]), File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3740, in default serial_obj.open() File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 332, in open self._reconfigure_port(force_update=True) File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 387, in _reconfigure_port raise SerialException(msg.errno, "Could not exclusively lock port {}: {}".format(self._port, msg)) serial.serialutil.SerialException: [Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable 2022-05-08 15:56:13,193 - octoprint.util.comm - INFO - Serial detection: Could not open port /dev/ttyACM0, baudrate 115200, skipping 2022-05-08 15:56:13,193 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyACM0, baudrate 250000 2022-05-08 15:56:13,194 - octoprint.util.comm - INFO - Connecting to port /dev/ttyACM0, baudrate 250000 2022-05-08 15:56:13,202 - octoprint.util.comm - ERROR - Unexpected error while connecting to serial port /dev/ttyACM0, baudrate 250000 from hook default: SerialException: '[Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable' @ comm.py:_open_serial:3779 Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 385, in _reconfigure_port fcntl.flock(self.fd, fcntl.LOCK_EX | fcntl.LOCK_NB) BlockingIOError: [Errno 11] Resource temporarily unavailable During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3779, in _open_serial settings().getFloat(["serial", "timeout", "connection"]), File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3740, in default serial_obj.open() File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 332, in open self._reconfigure_port(force_update=True) File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 387, in _reconfigure_port raise SerialException(msg.errno, "Could not exclusively lock port {}: {}".format(self._port, msg)) serial.serialutil.SerialException: [Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable 2022-05-08 15:56:13,203 - octoprint.util.comm - INFO - Serial detection: Could not open port /dev/ttyACM0, baudrate 250000, skipping 2022-05-08 15:56:13,203 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyACM0, baudrate 230400 2022-05-08 15:56:13,204 - octoprint.util.comm - INFO - Connecting to port /dev/ttyACM0, baudrate 230400 2022-05-08 15:56:13,215 - octoprint.util.comm - ERROR - Unexpected error while connecting to serial port /dev/ttyACM0, baudrate 230400 from hook default: SerialException: '[Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable' @ comm.py:_open_serial:3779 Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 385, in _reconfigure_port fcntl.flock(self.fd, fcntl.LOCK_EX | fcntl.LOCK_NB) BlockingIOError: [Errno 11] Resource temporarily unavailable During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3779, in _open_serial settings().getFloat(["serial", "timeout", "connection"]), File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3740, in default serial_obj.open() File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 332, in open self._reconfigure_port(force_update=True) File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 387, in _reconfigure_port raise SerialException(msg.errno, "Could not exclusively lock port {}: {}".format(self._port, msg)) serial.serialutil.SerialException: [Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable 2022-05-08 15:56:13,216 - octoprint.util.comm - INFO - Serial detection: Could not open port /dev/ttyACM0, baudrate 230400, skipping 2022-05-08 15:56:13,217 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyACM0, baudrate 57600 2022-05-08 15:56:13,219 - octoprint.util.comm - INFO - Connecting to port /dev/ttyACM0, baudrate 57600 2022-05-08 15:56:13,230 - octoprint.util.comm - ERROR - Unexpected error while connecting to serial port /dev/ttyACM0, baudrate 57600 from hook default: SerialException: '[Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable' @ comm.py:_open_serial:3779 Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 385, in _reconfigure_port fcntl.flock(self.fd, fcntl.LOCK_EX | fcntl.LOCK_NB) BlockingIOError: [Errno 11] Resource temporarily unavailable During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3779, in _open_serial settings().getFloat(["serial", "timeout", "connection"]), File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3740, in default serial_obj.open() File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 332, in open self._reconfigure_port(force_update=True) File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 387, in _reconfigure_port raise SerialException(msg.errno, "Could not exclusively lock port {}: {}".format(self._port, msg)) serial.serialutil.SerialException: [Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable 2022-05-08 15:56:13,232 - octoprint.util.comm - INFO - Serial detection: Could not open port /dev/ttyACM0, baudrate 57600, skipping 2022-05-08 15:56:13,233 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyACM0, baudrate 38400 2022-05-08 15:56:13,235 - octoprint.util.comm - INFO - Connecting to port /dev/ttyACM0, baudrate 38400 2022-05-08 15:56:13,245 - octoprint.util.comm - ERROR - Unexpected error while connecting to serial port /dev/ttyACM0, baudrate 38400 from hook default: SerialException: '[Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable' @ comm.py:_open_serial:3779 Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 385, in _reconfigure_port fcntl.flock(self.fd, fcntl.LOCK_EX | fcntl.LOCK_NB) BlockingIOError: [Errno 11] Resource temporarily unavailable During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3779, in _open_serial settings().getFloat(["serial", "timeout", "connection"]), File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3740, in default serial_obj.open() File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 332, in open self._reconfigure_port(force_update=True) File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 387, in _reconfigure_port raise SerialException(msg.errno, "Could not exclusively lock port {}: {}".format(self._port, msg)) serial.serialutil.SerialException: [Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable 2022-05-08 15:56:13,246 - octoprint.util.comm - INFO - Serial detection: Could not open port /dev/ttyACM0, baudrate 38400, skipping 2022-05-08 15:56:13,247 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyACM0, baudrate 19200 2022-05-08 15:56:13,248 - octoprint.util.comm - INFO - Connecting to port /dev/ttyACM0, baudrate 19200 2022-05-08 15:56:13,254 - octoprint.util.comm - ERROR - Unexpected error while connecting to serial port /dev/ttyACM0, baudrate 19200 from hook default: SerialException: '[Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable' @ comm.py:_open_serial:3779 Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 385, in _reconfigure_port fcntl.flock(self.fd, fcntl.LOCK_EX | fcntl.LOCK_NB) BlockingIOError: [Errno 11] Resource temporarily unavailable During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3779, in _open_serial settings().getFloat(["serial", "timeout", "connection"]), File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3740, in default serial_obj.open() File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 332, in open self._reconfigure_port(force_update=True) File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 387, in _reconfigure_port raise SerialException(msg.errno, "Could not exclusively lock port {}: {}".format(self._port, msg)) serial.serialutil.SerialException: [Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable 2022-05-08 15:56:13,256 - octoprint.util.comm - INFO - Serial detection: Could not open port /dev/ttyACM0, baudrate 19200, skipping 2022-05-08 15:56:13,256 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyACM0, baudrate 9600 2022-05-08 15:56:13,258 - octoprint.util.comm - INFO - Connecting to port /dev/ttyACM0, baudrate 9600 2022-05-08 15:56:13,261 - octoprint.util.comm - ERROR - Unexpected error while connecting to serial port /dev/ttyACM0, baudrate 9600 from hook default: SerialException: '[Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable' @ comm.py:_open_serial:3779 Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 385, in _reconfigure_port fcntl.flock(self.fd, fcntl.LOCK_EX | fcntl.LOCK_NB) BlockingIOError: [Errno 11] Resource temporarily unavailable During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3779, in _open_serial settings().getFloat(["serial", "timeout", "connection"]), File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3740, in default serial_obj.open() File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 332, in open self._reconfigure_port(force_update=True) File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 387, in _reconfigure_port raise SerialException(msg.errno, "Could not exclusively lock port {}: {}".format(self._port, msg)) serial.serialutil.SerialException: [Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable 2022-05-08 15:56:13,266 - octoprint.util.comm - INFO - Serial detection: Could not open port /dev/ttyACM0, baudrate 9600, skipping 2022-05-08 15:56:13,269 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Error" 2022-05-08 15:56:13,272 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2022-05-08 15:56:13,349 - octoprint.plugins.excluderegion - INFO - Printing stopped: event=Error 2022-05-08 15:56:13,380 - octoprint.plugins.octoeverywhere - ERROR - Failed to find time estimate from OctoPrint. int() argument must be a string, a bytes-like object or a number, not 'NoneType' 2022-05-08 15:56:13,381 - octoprint.plugins.octoeverywhere - ERROR - Failed to find time estimate from OctoPrint. int() argument must be a string, a bytes-like object or a number, not 'NoneType' 2022-05-08 15:56:13,394 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2022-05-08 15:56:13,869 - octoprint.plugins.tracking - INFO - Sent tracking event commerror_autodetect, payload: {'commerror_text': 'No more candidates to test, and no working port/baudrate combination detected.'} 2022-05-08 15:56:14,206 - octoprint.plugins.octoeverywhere - INFO - NotificationsHandler successfully sent 'error'; ETA: -1 2022-05-08 15:57:07,244 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.0.125 2022-05-08 15:57:14,649 - octoprint.server.util.flask - INFO - Passively logging in user ssenrah from ::ffff:192.168.0.125 2022-05-08 15:57:14,651 - octoprint.access.users - INFO - Logged in user: ssenrah 2022-05-08 15:57:15,151 - octoprint.plugins.octoeverywhere - INFO - SetFrontendLocalPort API called. Port:80 IsHttps:False URL:http://192.168.0.158/#temp 2022-05-08 15:57:15,556 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 5, 'spoolName': 'Jet Black', 'material': 'PETG', 'colorName': 'black', 'remainingWeight': 763.6781901562279}' to event-bus 2022-05-08 15:57:15,661 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.0.125 2022-05-08 15:57:15,795 - octoprint.server.util.flask - INFO - Passively logging in user ssenrah from ::ffff:192.168.0.125 2022-05-08 15:57:15,795 - octoprint.access.users - INFO - Logged in user: ssenrah 2022-05-08 15:57:16,627 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2022-05-08 15:57:16,629 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://octopi.local:80/', 'accessToken': '1F3B7A663FB44EDCBDEF767FF98296E8'}, 'printer': {'name': 'Prusa MK3S+', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 185, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 30, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 15, 'useM600': True}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': False}, 'spoolManager': {'enabled': True}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'color': '#dcdde1', 'command': 'G28', 'confirm': False, 'exit': True, 'icon': 'home'}, {'color': '#4bae50', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/webcam', 'confirm': False, 'exit': False, 'icon': 'camera'}, {'color': '#e1b12c', 'command': 'M140 S50; M104 S185', 'confirm': False, 'exit': True, 'icon': 'fire-alt'}, {'color': '#0097e6', 'command': 'M140 S0; M104 S0', 'confirm': False, 'exit': True, 'icon': 'snowflake'}, {'color': '#0097e6', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/sleep', 'confirm': False, 'exit': False, 'icon': 'bed'}, {'color': '#FF0000', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/restart', 'confirm': True, 'exit': False, 'icon': 'power-off'}], 'fileSorting': {'attribute': 'date', 'order': 'dsc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': True, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2022-05-08 15:57:17,940 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2022-05-08 15:57:17,942 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://octopi.local:80/', 'accessToken': '1F3B7A663FB44EDCBDEF767FF98296E8'}, 'printer': {'name': 'Prusa MK3S+', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 185, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 30, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 15, 'useM600': True}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': False}, 'spoolManager': {'enabled': True}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'color': '#dcdde1', 'command': 'G28', 'confirm': False, 'exit': True, 'icon': 'home'}, {'color': '#4bae50', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/webcam', 'confirm': False, 'exit': False, 'icon': 'camera'}, {'color': '#e1b12c', 'command': 'M140 S50; M104 S185', 'confirm': False, 'exit': True, 'icon': 'fire-alt'}, {'color': '#0097e6', 'command': 'M140 S0; M104 S0', 'confirm': False, 'exit': True, 'icon': 'snowflake'}, {'color': '#0097e6', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/sleep', 'confirm': False, 'exit': False, 'icon': 'bed'}, {'color': '#FF0000', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/restart', 'confirm': True, 'exit': False, 'icon': 'power-off'}], 'fileSorting': {'attribute': 'date', 'order': 'dsc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': True, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2022-05-08 15:57:18,602 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 5, 'spoolName': 'Jet Black', 'material': 'PETG', 'colorName': 'black', 'remainingWeight': 763.6781901562279}' to event-bus 2022-05-08 15:57:18,706 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 5, 'spoolName': 'Jet Black', 'material': 'PETG', 'colorName': 'black', 'remainingWeight': 763.6781901562279}' to event-bus 2022-05-08 15:57:18,786 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 5, 'spoolName': 'Jet Black', 'material': 'PETG', 'colorName': 'black', 'remainingWeight': 763.6781901562279}' to event-bus 2022-05-08 15:57:18,815 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 5, 'spoolName': 'Jet Black', 'material': 'PETG', 'colorName': 'black', 'remainingWeight': 763.6781901562279}' to event-bus 2022-05-08 15:57:18,847 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 5, 'spoolName': 'Jet Black', 'material': 'PETG', 'colorName': 'black', 'remainingWeight': 763.6781901562279}' to event-bus 2022-05-08 15:57:18,918 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 5, 'spoolName': 'Jet Black', 'material': 'PETG', 'colorName': 'black', 'remainingWeight': 763.6781901562279}' to event-bus 2022-05-08 15:57:19,010 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 5, 'spoolName': 'Jet Black', 'material': 'PETG', 'colorName': 'black', 'remainingWeight': 763.6781901562279}' to event-bus 2022-05-08 15:57:19,055 - octoprint.server.util.sockjs - INFO - User ssenrah logged in on the socket from client ::ffff:192.168.0.125 2022-05-08 15:57:20,646 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 5, 'spoolName': 'Jet Black', 'material': 'PETG', 'colorName': 'black', 'remainingWeight': 763.6781901562279}' to event-bus 2022-05-08 15:57:21,467 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2022-05-08 15:57:21,469 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://octopi.local:80/', 'accessToken': '1F3B7A663FB44EDCBDEF767FF98296E8'}, 'printer': {'name': 'Prusa MK3S+', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 185, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 30, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 15, 'useM600': True}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': False}, 'spoolManager': {'enabled': True}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'color': '#dcdde1', 'command': 'G28', 'confirm': False, 'exit': True, 'icon': 'home'}, {'color': '#4bae50', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/webcam', 'confirm': False, 'exit': False, 'icon': 'camera'}, {'color': '#e1b12c', 'command': 'M140 S50; M104 S185', 'confirm': False, 'exit': True, 'icon': 'fire-alt'}, {'color': '#0097e6', 'command': 'M140 S0; M104 S0', 'confirm': False, 'exit': True, 'icon': 'snowflake'}, {'color': '#0097e6', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/sleep', 'confirm': False, 'exit': False, 'icon': 'bed'}, {'color': '#FF0000', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/restart', 'confirm': True, 'exit': False, 'icon': 'power-off'}], 'fileSorting': {'attribute': 'date', 'order': 'dsc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': True, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2022-05-08 15:57:22,732 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2022-05-08 15:57:22,734 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://octopi.local:80/', 'accessToken': '1F3B7A663FB44EDCBDEF767FF98296E8'}, 'printer': {'name': 'Prusa MK3S+', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 185, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 30, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 15, 'useM600': True}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': False}, 'spoolManager': {'enabled': True}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'color': '#dcdde1', 'command': 'G28', 'confirm': False, 'exit': True, 'icon': 'home'}, {'color': '#4bae50', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/webcam', 'confirm': False, 'exit': False, 'icon': 'camera'}, {'color': '#e1b12c', 'command': 'M140 S50; M104 S185', 'confirm': False, 'exit': True, 'icon': 'fire-alt'}, {'color': '#0097e6', 'command': 'M140 S0; M104 S0', 'confirm': False, 'exit': True, 'icon': 'snowflake'}, {'color': '#0097e6', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/sleep', 'confirm': False, 'exit': False, 'icon': 'bed'}, {'color': '#FF0000', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/restart', 'confirm': True, 'exit': False, 'icon': 'power-off'}], 'fileSorting': {'attribute': 'date', 'order': 'dsc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': True, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2022-05-08 15:57:23,234 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 5, 'spoolName': 'Jet Black', 'material': 'PETG', 'colorName': 'black', 'remainingWeight': 763.6781901562279}' to event-bus 2022-05-08 15:57:23,535 - octoprint.plugins.tracking - INFO - Sent tracking event webui_load, payload: {'browser_name': 'Chrome', 'browser_version': '101.0.4951.54', 'os_name': 'Windows', 'os_version': '10'} 2022-05-08 15:57:42,416 - octoprint.plugins.SpoolManager - INFO - Store selected spool Galaxy Silver for tool 0 in settings. 2022-05-08 15:57:42,417 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 12, 'spoolName': 'Galaxy Silver', 'material': 'PLA', 'colorName': 'lightgrey', 'remainingWeight': 145.0}' to event-bus 2022-05-08 15:57:42,732 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 12, 'spoolName': 'Galaxy Silver', 'material': 'PLA', 'colorName': 'lightgrey', 'remainingWeight': 145.0}' to event-bus 2022-05-08 15:57:42,752 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 12, 'spoolName': 'Galaxy Silver', 'material': 'PLA', 'colorName': 'lightgrey', 'remainingWeight': 145.0}' to event-bus 2022-05-08 16:00:17,597 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2022-05-08 16:00:17,655 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 7 port/baudrate candidates: /dev/ttyACM0@115200, /dev/ttyACM0@250000, /dev/ttyACM0@230400, /dev/ttyACM0@57600, /dev/ttyACM0@38400, /dev/ttyACM0@19200, /dev/ttyACM0@9600 2022-05-08 16:00:17,655 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyACM0, baudrate 115200 2022-05-08 16:00:17,656 - octoprint.util.comm - INFO - Connecting to port /dev/ttyACM0, baudrate 115200 2022-05-08 16:00:17,662 - octoprint.util.comm - ERROR - Unexpected error while connecting to serial port /dev/ttyACM0, baudrate 115200 from hook default: SerialException: '[Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable' @ comm.py:_open_serial:3779 Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 385, in _reconfigure_port fcntl.flock(self.fd, fcntl.LOCK_EX | fcntl.LOCK_NB) BlockingIOError: [Errno 11] Resource temporarily unavailable During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3779, in _open_serial settings().getFloat(["serial", "timeout", "connection"]), File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3740, in default serial_obj.open() File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 332, in open self._reconfigure_port(force_update=True) File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 387, in _reconfigure_port raise SerialException(msg.errno, "Could not exclusively lock port {}: {}".format(self._port, msg)) serial.serialutil.SerialException: [Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable 2022-05-08 16:00:17,664 - octoprint.util.comm - INFO - Serial detection: Could not open port /dev/ttyACM0, baudrate 115200, skipping 2022-05-08 16:00:17,664 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyACM0, baudrate 250000 2022-05-08 16:00:17,665 - octoprint.util.comm - INFO - Connecting to port /dev/ttyACM0, baudrate 250000 2022-05-08 16:00:17,669 - octoprint.util.comm - ERROR - Unexpected error while connecting to serial port /dev/ttyACM0, baudrate 250000 from hook default: SerialException: '[Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable' @ comm.py:_open_serial:3779 Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 385, in _reconfigure_port fcntl.flock(self.fd, fcntl.LOCK_EX | fcntl.LOCK_NB) BlockingIOError: [Errno 11] Resource temporarily unavailable During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3779, in _open_serial settings().getFloat(["serial", "timeout", "connection"]), File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3740, in default serial_obj.open() File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 332, in open self._reconfigure_port(force_update=True) File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 387, in _reconfigure_port raise SerialException(msg.errno, "Could not exclusively lock port {}: {}".format(self._port, msg)) serial.serialutil.SerialException: [Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable 2022-05-08 16:00:17,673 - octoprint.util.comm - INFO - Serial detection: Could not open port /dev/ttyACM0, baudrate 250000, skipping 2022-05-08 16:00:17,677 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyACM0, baudrate 230400 2022-05-08 16:00:17,678 - octoprint.util.comm - INFO - Connecting to port /dev/ttyACM0, baudrate 230400 2022-05-08 16:00:17,682 - octoprint.util.comm - ERROR - Unexpected error while connecting to serial port /dev/ttyACM0, baudrate 230400 from hook default: SerialException: '[Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable' @ comm.py:_open_serial:3779 Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 385, in _reconfigure_port fcntl.flock(self.fd, fcntl.LOCK_EX | fcntl.LOCK_NB) BlockingIOError: [Errno 11] Resource temporarily unavailable During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3779, in _open_serial settings().getFloat(["serial", "timeout", "connection"]), File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3740, in default serial_obj.open() File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 332, in open self._reconfigure_port(force_update=True) File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 387, in _reconfigure_port raise SerialException(msg.errno, "Could not exclusively lock port {}: {}".format(self._port, msg)) serial.serialutil.SerialException: [Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable 2022-05-08 16:00:17,682 - octoprint.util.comm - INFO - Serial detection: Could not open port /dev/ttyACM0, baudrate 230400, skipping 2022-05-08 16:00:17,683 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyACM0, baudrate 57600 2022-05-08 16:00:17,684 - octoprint.util.comm - INFO - Connecting to port /dev/ttyACM0, baudrate 57600 2022-05-08 16:00:17,689 - octoprint.util.comm - ERROR - Unexpected error while connecting to serial port /dev/ttyACM0, baudrate 57600 from hook default: SerialException: '[Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable' @ comm.py:_open_serial:3779 Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 385, in _reconfigure_port fcntl.flock(self.fd, fcntl.LOCK_EX | fcntl.LOCK_NB) BlockingIOError: [Errno 11] Resource temporarily unavailable During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3779, in _open_serial settings().getFloat(["serial", "timeout", "connection"]), File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3740, in default serial_obj.open() File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 332, in open self._reconfigure_port(force_update=True) File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 387, in _reconfigure_port raise SerialException(msg.errno, "Could not exclusively lock port {}: {}".format(self._port, msg)) serial.serialutil.SerialException: [Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable 2022-05-08 16:00:17,690 - octoprint.util.comm - INFO - Serial detection: Could not open port /dev/ttyACM0, baudrate 57600, skipping 2022-05-08 16:00:17,690 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyACM0, baudrate 38400 2022-05-08 16:00:17,691 - octoprint.util.comm - INFO - Connecting to port /dev/ttyACM0, baudrate 38400 2022-05-08 16:00:17,698 - octoprint.util.comm - ERROR - Unexpected error while connecting to serial port /dev/ttyACM0, baudrate 38400 from hook default: SerialException: '[Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable' @ comm.py:_open_serial:3779 Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 385, in _reconfigure_port fcntl.flock(self.fd, fcntl.LOCK_EX | fcntl.LOCK_NB) BlockingIOError: [Errno 11] Resource temporarily unavailable During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3779, in _open_serial settings().getFloat(["serial", "timeout", "connection"]), File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3740, in default serial_obj.open() File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 332, in open self._reconfigure_port(force_update=True) File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 387, in _reconfigure_port raise SerialException(msg.errno, "Could not exclusively lock port {}: {}".format(self._port, msg)) serial.serialutil.SerialException: [Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable 2022-05-08 16:00:17,699 - octoprint.util.comm - INFO - Serial detection: Could not open port /dev/ttyACM0, baudrate 38400, skipping 2022-05-08 16:00:17,699 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyACM0, baudrate 19200 2022-05-08 16:00:17,701 - octoprint.util.comm - INFO - Connecting to port /dev/ttyACM0, baudrate 19200 2022-05-08 16:00:17,704 - octoprint.util.comm - ERROR - Unexpected error while connecting to serial port /dev/ttyACM0, baudrate 19200 from hook default: SerialException: '[Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable' @ comm.py:_open_serial:3779 Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 385, in _reconfigure_port fcntl.flock(self.fd, fcntl.LOCK_EX | fcntl.LOCK_NB) BlockingIOError: [Errno 11] Resource temporarily unavailable During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3779, in _open_serial settings().getFloat(["serial", "timeout", "connection"]), File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3740, in default serial_obj.open() File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 332, in open self._reconfigure_port(force_update=True) File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 387, in _reconfigure_port raise SerialException(msg.errno, "Could not exclusively lock port {}: {}".format(self._port, msg)) serial.serialutil.SerialException: [Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable 2022-05-08 16:00:17,707 - octoprint.util.comm - INFO - Serial detection: Could not open port /dev/ttyACM0, baudrate 19200, skipping 2022-05-08 16:00:17,709 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyACM0, baudrate 9600 2022-05-08 16:00:17,712 - octoprint.util.comm - INFO - Connecting to port /dev/ttyACM0, baudrate 9600 2022-05-08 16:00:17,716 - octoprint.util.comm - ERROR - Unexpected error while connecting to serial port /dev/ttyACM0, baudrate 9600 from hook default: SerialException: '[Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable' @ comm.py:_open_serial:3779 Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 385, in _reconfigure_port fcntl.flock(self.fd, fcntl.LOCK_EX | fcntl.LOCK_NB) BlockingIOError: [Errno 11] Resource temporarily unavailable During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3779, in _open_serial settings().getFloat(["serial", "timeout", "connection"]), File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3740, in default serial_obj.open() File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 332, in open self._reconfigure_port(force_update=True) File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 387, in _reconfigure_port raise SerialException(msg.errno, "Could not exclusively lock port {}: {}".format(self._port, msg)) serial.serialutil.SerialException: [Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable 2022-05-08 16:00:17,718 - octoprint.util.comm - INFO - Serial detection: Could not open port /dev/ttyACM0, baudrate 9600, skipping 2022-05-08 16:00:17,720 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Error" 2022-05-08 16:00:17,722 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2022-05-08 16:00:17,786 - octoprint.plugins.excluderegion - INFO - Printing stopped: event=Error 2022-05-08 16:00:17,810 - octoprint.plugins.octoeverywhere - ERROR - Failed to find time estimate from OctoPrint. int() argument must be a string, a bytes-like object or a number, not 'NoneType' 2022-05-08 16:00:17,812 - octoprint.plugins.octoeverywhere - ERROR - Failed to find time estimate from OctoPrint. int() argument must be a string, a bytes-like object or a number, not 'NoneType' 2022-05-08 16:00:17,837 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2022-05-08 16:00:18,365 - octoprint.plugins.tracking - INFO - Sent tracking event commerror_autodetect, payload: {'commerror_text': 'No more candidates to test, and no working port/baudrate combination detected.'} 2022-05-08 16:00:18,845 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2022-05-08 16:00:18,847 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://octopi.local:80/', 'accessToken': '1F3B7A663FB44EDCBDEF767FF98296E8'}, 'printer': {'name': 'Prusa MK3S+', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 185, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 30, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 15, 'useM600': True}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': False}, 'spoolManager': {'enabled': True}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'color': '#dcdde1', 'command': 'G28', 'confirm': False, 'exit': True, 'icon': 'home'}, {'color': '#4bae50', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/webcam', 'confirm': False, 'exit': False, 'icon': 'camera'}, {'color': '#e1b12c', 'command': 'M140 S50; M104 S185', 'confirm': False, 'exit': True, 'icon': 'fire-alt'}, {'color': '#0097e6', 'command': 'M140 S0; M104 S0', 'confirm': False, 'exit': True, 'icon': 'snowflake'}, {'color': '#0097e6', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/sleep', 'confirm': False, 'exit': False, 'icon': 'bed'}, {'color': '#FF0000', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/restart', 'confirm': True, 'exit': False, 'icon': 'power-off'}], 'fileSorting': {'attribute': 'date', 'order': 'dsc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': True, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2022-05-08 16:00:19,003 - octoprint.plugins.octoeverywhere - INFO - NotificationsHandler successfully sent 'error'; ETA: -1 2022-05-08 16:00:20,154 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2022-05-08 16:00:20,157 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://octopi.local:80/', 'accessToken': '1F3B7A663FB44EDCBDEF767FF98296E8'}, 'printer': {'name': 'Prusa MK3S+', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 185, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 30, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 15, 'useM600': True}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': False}, 'spoolManager': {'enabled': True}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'color': '#dcdde1', 'command': 'G28', 'confirm': False, 'exit': True, 'icon': 'home'}, {'color': '#4bae50', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/webcam', 'confirm': False, 'exit': False, 'icon': 'camera'}, {'color': '#e1b12c', 'command': 'M140 S50; M104 S185', 'confirm': False, 'exit': True, 'icon': 'fire-alt'}, {'color': '#0097e6', 'command': 'M140 S0; M104 S0', 'confirm': False, 'exit': True, 'icon': 'snowflake'}, {'color': '#0097e6', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/sleep', 'confirm': False, 'exit': False, 'icon': 'bed'}, {'color': '#FF0000', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/restart', 'confirm': True, 'exit': False, 'icon': 'power-off'}], 'fileSorting': {'attribute': 'date', 'order': 'dsc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': True, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2022-05-08 16:00:20,654 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 12, 'spoolName': 'Galaxy Silver', 'material': 'PLA', 'colorName': 'lightgrey', 'remainingWeight': 145.0}' to event-bus 2022-05-08 16:00:25,722 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2022-05-08 16:00:25,774 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 7 port/baudrate candidates: /dev/ttyACM0@115200, /dev/ttyACM0@250000, /dev/ttyACM0@230400, /dev/ttyACM0@57600, /dev/ttyACM0@38400, /dev/ttyACM0@19200, /dev/ttyACM0@9600 2022-05-08 16:00:25,775 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyACM0, baudrate 115200 2022-05-08 16:00:25,775 - octoprint.util.comm - INFO - Connecting to port /dev/ttyACM0, baudrate 115200 2022-05-08 16:00:25,781 - octoprint.util.comm - ERROR - Unexpected error while connecting to serial port /dev/ttyACM0, baudrate 115200 from hook default: SerialException: '[Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable' @ comm.py:_open_serial:3779 Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 385, in _reconfigure_port fcntl.flock(self.fd, fcntl.LOCK_EX | fcntl.LOCK_NB) BlockingIOError: [Errno 11] Resource temporarily unavailable During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3779, in _open_serial settings().getFloat(["serial", "timeout", "connection"]), File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3740, in default serial_obj.open() File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 332, in open self._reconfigure_port(force_update=True) File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 387, in _reconfigure_port raise SerialException(msg.errno, "Could not exclusively lock port {}: {}".format(self._port, msg)) serial.serialutil.SerialException: [Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable 2022-05-08 16:00:25,781 - octoprint.util.comm - INFO - Serial detection: Could not open port /dev/ttyACM0, baudrate 115200, skipping 2022-05-08 16:00:25,782 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyACM0, baudrate 250000 2022-05-08 16:00:25,783 - octoprint.util.comm - INFO - Connecting to port /dev/ttyACM0, baudrate 250000 2022-05-08 16:00:25,789 - octoprint.util.comm - ERROR - Unexpected error while connecting to serial port /dev/ttyACM0, baudrate 250000 from hook default: SerialException: '[Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable' @ comm.py:_open_serial:3779 Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 385, in _reconfigure_port fcntl.flock(self.fd, fcntl.LOCK_EX | fcntl.LOCK_NB) BlockingIOError: [Errno 11] Resource temporarily unavailable During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3779, in _open_serial settings().getFloat(["serial", "timeout", "connection"]), File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3740, in default serial_obj.open() File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 332, in open self._reconfigure_port(force_update=True) File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 387, in _reconfigure_port raise SerialException(msg.errno, "Could not exclusively lock port {}: {}".format(self._port, msg)) serial.serialutil.SerialException: [Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable 2022-05-08 16:00:25,790 - octoprint.util.comm - INFO - Serial detection: Could not open port /dev/ttyACM0, baudrate 250000, skipping 2022-05-08 16:00:25,790 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyACM0, baudrate 230400 2022-05-08 16:00:25,791 - octoprint.util.comm - INFO - Connecting to port /dev/ttyACM0, baudrate 230400 2022-05-08 16:00:25,805 - octoprint.util.comm - ERROR - Unexpected error while connecting to serial port /dev/ttyACM0, baudrate 230400 from hook default: SerialException: '[Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable' @ comm.py:_open_serial:3779 Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 385, in _reconfigure_port fcntl.flock(self.fd, fcntl.LOCK_EX | fcntl.LOCK_NB) BlockingIOError: [Errno 11] Resource temporarily unavailable During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3779, in _open_serial settings().getFloat(["serial", "timeout", "connection"]), File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3740, in default serial_obj.open() File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 332, in open self._reconfigure_port(force_update=True) File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 387, in _reconfigure_port raise SerialException(msg.errno, "Could not exclusively lock port {}: {}".format(self._port, msg)) serial.serialutil.SerialException: [Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable 2022-05-08 16:00:25,805 - octoprint.util.comm - INFO - Serial detection: Could not open port /dev/ttyACM0, baudrate 230400, skipping 2022-05-08 16:00:25,805 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyACM0, baudrate 57600 2022-05-08 16:00:25,806 - octoprint.util.comm - INFO - Connecting to port /dev/ttyACM0, baudrate 57600 2022-05-08 16:00:25,813 - octoprint.util.comm - ERROR - Unexpected error while connecting to serial port /dev/ttyACM0, baudrate 57600 from hook default: SerialException: '[Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable' @ comm.py:_open_serial:3779 Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 385, in _reconfigure_port fcntl.flock(self.fd, fcntl.LOCK_EX | fcntl.LOCK_NB) BlockingIOError: [Errno 11] Resource temporarily unavailable During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3779, in _open_serial settings().getFloat(["serial", "timeout", "connection"]), File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3740, in default serial_obj.open() File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 332, in open self._reconfigure_port(force_update=True) File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 387, in _reconfigure_port raise SerialException(msg.errno, "Could not exclusively lock port {}: {}".format(self._port, msg)) serial.serialutil.SerialException: [Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable 2022-05-08 16:00:25,814 - octoprint.util.comm - INFO - Serial detection: Could not open port /dev/ttyACM0, baudrate 57600, skipping 2022-05-08 16:00:25,814 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyACM0, baudrate 38400 2022-05-08 16:00:25,816 - octoprint.util.comm - INFO - Connecting to port /dev/ttyACM0, baudrate 38400 2022-05-08 16:00:25,823 - octoprint.util.comm - ERROR - Unexpected error while connecting to serial port /dev/ttyACM0, baudrate 38400 from hook default: SerialException: '[Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable' @ comm.py:_open_serial:3779 Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 385, in _reconfigure_port fcntl.flock(self.fd, fcntl.LOCK_EX | fcntl.LOCK_NB) BlockingIOError: [Errno 11] Resource temporarily unavailable During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3779, in _open_serial settings().getFloat(["serial", "timeout", "connection"]), File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3740, in default serial_obj.open() File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 332, in open self._reconfigure_port(force_update=True) File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 387, in _reconfigure_port raise SerialException(msg.errno, "Could not exclusively lock port {}: {}".format(self._port, msg)) serial.serialutil.SerialException: [Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable 2022-05-08 16:00:25,825 - octoprint.util.comm - INFO - Serial detection: Could not open port /dev/ttyACM0, baudrate 38400, skipping 2022-05-08 16:00:25,827 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyACM0, baudrate 19200 2022-05-08 16:00:25,830 - octoprint.util.comm - INFO - Connecting to port /dev/ttyACM0, baudrate 19200 2022-05-08 16:00:25,834 - octoprint.util.comm - ERROR - Unexpected error while connecting to serial port /dev/ttyACM0, baudrate 19200 from hook default: SerialException: '[Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable' @ comm.py:_open_serial:3779 Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 385, in _reconfigure_port fcntl.flock(self.fd, fcntl.LOCK_EX | fcntl.LOCK_NB) BlockingIOError: [Errno 11] Resource temporarily unavailable During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3779, in _open_serial settings().getFloat(["serial", "timeout", "connection"]), File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3740, in default serial_obj.open() File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 332, in open self._reconfigure_port(force_update=True) File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 387, in _reconfigure_port raise SerialException(msg.errno, "Could not exclusively lock port {}: {}".format(self._port, msg)) serial.serialutil.SerialException: [Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable 2022-05-08 16:00:25,834 - octoprint.util.comm - INFO - Serial detection: Could not open port /dev/ttyACM0, baudrate 19200, skipping 2022-05-08 16:00:25,835 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyACM0, baudrate 9600 2022-05-08 16:00:25,835 - octoprint.util.comm - INFO - Connecting to port /dev/ttyACM0, baudrate 9600 2022-05-08 16:00:25,842 - octoprint.util.comm - ERROR - Unexpected error while connecting to serial port /dev/ttyACM0, baudrate 9600 from hook default: SerialException: '[Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable' @ comm.py:_open_serial:3779 Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 385, in _reconfigure_port fcntl.flock(self.fd, fcntl.LOCK_EX | fcntl.LOCK_NB) BlockingIOError: [Errno 11] Resource temporarily unavailable During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3779, in _open_serial settings().getFloat(["serial", "timeout", "connection"]), File "/home/pi/oprint/lib/python3.7/site-packages/octoprint/util/comm.py", line 3740, in default serial_obj.open() File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 332, in open self._reconfigure_port(force_update=True) File "/home/pi/oprint/lib/python3.7/site-packages/serial/serialposix.py", line 387, in _reconfigure_port raise SerialException(msg.errno, "Could not exclusively lock port {}: {}".format(self._port, msg)) serial.serialutil.SerialException: [Errno 11] Could not exclusively lock port /dev/ttyACM0: [Errno 11] Resource temporarily unavailable 2022-05-08 16:00:25,843 - octoprint.util.comm - INFO - Serial detection: Could not open port /dev/ttyACM0, baudrate 9600, skipping 2022-05-08 16:00:25,844 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Error" 2022-05-08 16:00:25,846 - octoprint.util.comm - INFO - Changing monitoring state from "Error" to "Offline after error" 2022-05-08 16:00:25,926 - octoprint.plugins.excluderegion - INFO - Printing stopped: event=Error 2022-05-08 16:00:25,937 - octoprint.plugins.octoeverywhere - ERROR - Failed to find time estimate from OctoPrint. int() argument must be a string, a bytes-like object or a number, not 'NoneType' 2022-05-08 16:00:25,942 - octoprint.plugins.octoeverywhere - ERROR - Failed to find time estimate from OctoPrint. int() argument must be a string, a bytes-like object or a number, not 'NoneType' 2022-05-08 16:00:25,969 - octoprint.plugins.action_command_notification - INFO - Notifications cleared 2022-05-08 16:00:26,490 - octoprint.plugins.tracking - INFO - Sent tracking event commerror_autodetect, payload: {'commerror_text': 'No more candidates to test, and no working port/baudrate combination detected.'} 2022-05-08 16:00:26,812 - octoprint.plugins.octoeverywhere - INFO - NotificationsHandler successfully sent 'error'; ETA: -1 2022-05-08 16:00:26,825 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2022-05-08 16:00:26,828 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://octopi.local:80/', 'accessToken': '1F3B7A663FB44EDCBDEF767FF98296E8'}, 'printer': {'name': 'Prusa MK3S+', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 185, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 30, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 15, 'useM600': True}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': False}, 'spoolManager': {'enabled': True}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'color': '#dcdde1', 'command': 'G28', 'confirm': False, 'exit': True, 'icon': 'home'}, {'color': '#4bae50', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/webcam', 'confirm': False, 'exit': False, 'icon': 'camera'}, {'color': '#e1b12c', 'command': 'M140 S50; M104 S185', 'confirm': False, 'exit': True, 'icon': 'fire-alt'}, {'color': '#0097e6', 'command': 'M140 S0; M104 S0', 'confirm': False, 'exit': True, 'icon': 'snowflake'}, {'color': '#0097e6', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/sleep', 'confirm': False, 'exit': False, 'icon': 'bed'}, {'color': '#FF0000', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/restart', 'confirm': True, 'exit': False, 'icon': 'power-off'}], 'fileSorting': {'attribute': 'date', 'order': 'dsc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': True, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2022-05-08 16:00:27,404 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 12, 'spoolName': 'Galaxy Silver', 'material': 'PLA', 'colorName': 'lightgrey', 'remainingWeight': 145.0}' to event-bus 2022-05-08 16:00:52,800 - zeroconf - WARNING - Error with socket 5 (('127.0.0.1', 5353))): [Errno 22] Invalid argument Traceback (most recent call last): File "/usr/lib/python3.7/asyncio/selector_events.py", line 987, in sendto self._sock.sendto(data, addr) OSError: [Errno 22] Invalid argument 2022-05-08 16:00:54,823 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.0.192 2022-05-08 16:00:54,978 - octoprint.server.util.flask - INFO - Passively logging in user ssenrah from ::ffff:192.168.0.192 2022-05-08 16:00:54,978 - octoprint.access.users - INFO - Logged in user: ssenrah 2022-05-08 16:00:55,001 - octoprint.server.util.sockjs - INFO - User ssenrah logged in on the socket from client ::ffff:192.168.0.192 2022-05-08 16:00:56,817 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2022-05-08 16:00:56,820 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://octopi.local:80/', 'accessToken': '1F3B7A663FB44EDCBDEF767FF98296E8'}, 'printer': {'name': 'Prusa MK3S+', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 185, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 30, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 15, 'useM600': True}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': False}, 'spoolManager': {'enabled': True}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'color': '#dcdde1', 'command': 'G28', 'confirm': False, 'exit': True, 'icon': 'home'}, {'color': '#4bae50', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/webcam', 'confirm': False, 'exit': False, 'icon': 'camera'}, {'color': '#e1b12c', 'command': 'M140 S50; M104 S185', 'confirm': False, 'exit': True, 'icon': 'fire-alt'}, {'color': '#0097e6', 'command': 'M140 S0; M104 S0', 'confirm': False, 'exit': True, 'icon': 'snowflake'}, {'color': '#0097e6', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/sleep', 'confirm': False, 'exit': False, 'icon': 'bed'}, {'color': '#FF0000', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/restart', 'confirm': True, 'exit': False, 'icon': 'power-off'}], 'fileSorting': {'attribute': 'date', 'order': 'dsc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': True, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2022-05-08 16:00:58,082 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 12, 'spoolName': 'Galaxy Silver', 'material': 'PLA', 'colorName': 'lightgrey', 'remainingWeight': 145.0}' to event-bus 2022-05-08 16:00:58,148 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2022-05-08 16:00:58,151 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://octopi.local:80/', 'accessToken': '1F3B7A663FB44EDCBDEF767FF98296E8'}, 'printer': {'name': 'Prusa MK3S+', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 185, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 30, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 15, 'useM600': True}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': False}, 'spoolManager': {'enabled': True}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'color': '#dcdde1', 'command': 'G28', 'confirm': False, 'exit': True, 'icon': 'home'}, {'color': '#4bae50', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/webcam', 'confirm': False, 'exit': False, 'icon': 'camera'}, {'color': '#e1b12c', 'command': 'M140 S50; M104 S185', 'confirm': False, 'exit': True, 'icon': 'fire-alt'}, {'color': '#0097e6', 'command': 'M140 S0; M104 S0', 'confirm': False, 'exit': True, 'icon': 'snowflake'}, {'color': '#0097e6', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/sleep', 'confirm': False, 'exit': False, 'icon': 'bed'}, {'color': '#FF0000', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/restart', 'confirm': True, 'exit': False, 'icon': 'power-off'}], 'fileSorting': {'attribute': 'date', 'order': 'dsc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': True, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2022-05-08 16:00:58,165 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 12, 'spoolName': 'Galaxy Silver', 'material': 'PLA', 'colorName': 'lightgrey', 'remainingWeight': 145.0}' to event-bus 2022-05-08 16:00:58,688 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2022-05-08 16:00:58,725 - octoprint.plugins.octoapp - INFO - Registered app ejT4cX2-SACXplNsGGmMmx:APA91bGhvQzBO-UWwpyXk0cE-b5gbIF2tQ--cVLXogwoiPjpqOmdX0b9t3_4U1GTCDFJ2tZDeUonMb5wjFucuhPx2zQm5NnVvSP6DeRLZl-dBtz_68ggmmrkdmlo50TFP6mwlW-igs50 2022-05-08 16:00:58,748 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 7 port/baudrate candidates: /dev/ttyACM1@115200, /dev/ttyACM1@250000, /dev/ttyACM1@230400, /dev/ttyACM1@57600, /dev/ttyACM1@38400, /dev/ttyACM1@19200, /dev/ttyACM1@9600 2022-05-08 16:00:58,749 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyACM1, baudrate 115200 2022-05-08 16:00:58,750 - octoprint.util.comm - INFO - Connecting to port /dev/ttyACM1, baudrate 115200 2022-05-08 16:00:58,756 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-05-08 16:00:58,761 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-05-08 16:00:59,824 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Operational" 2022-05-08 16:00:59,936 - octoprint.plugins.ipOnConnect - INFO - ipOnConnectPlugin: M117 192.168.0.158 2022-05-08 16:00:59,998 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-05-08 16:01:03,081 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2022-05-08 16:01:03,084 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://octopi.local:80/', 'accessToken': '1F3B7A663FB44EDCBDEF767FF98296E8'}, 'printer': {'name': 'Prusa MK3S+', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 185, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 30, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 15, 'useM600': True}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': False}, 'spoolManager': {'enabled': True}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'color': '#dcdde1', 'command': 'G28', 'confirm': False, 'exit': True, 'icon': 'home'}, {'color': '#4bae50', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/webcam', 'confirm': False, 'exit': False, 'icon': 'camera'}, {'color': '#e1b12c', 'command': 'M140 S50; M104 S185', 'confirm': False, 'exit': True, 'icon': 'fire-alt'}, {'color': '#0097e6', 'command': 'M140 S0; M104 S0', 'confirm': False, 'exit': True, 'icon': 'snowflake'}, {'color': '#0097e6', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/sleep', 'confirm': False, 'exit': False, 'icon': 'bed'}, {'color': '#FF0000', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/restart', 'confirm': True, 'exit': False, 'icon': 'power-off'}], 'fileSorting': {'attribute': 'date', 'order': 'dsc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': True, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2022-05-08 16:01:03,634 - octoprint.plugins.octoapp - INFO - Registered app ejT4cX2-SACXplNsGGmMmx:APA91bGhvQzBO-UWwpyXk0cE-b5gbIF2tQ--cVLXogwoiPjpqOmdX0b9t3_4U1GTCDFJ2tZDeUonMb5wjFucuhPx2zQm5NnVvSP6DeRLZl-dBtz_68ggmmrkdmlo50TFP6mwlW-igs50 2022-05-08 16:01:04,844 - octoprint.util.comm - INFO - Printer reports firmware name "Prusa-Firmware 3.10.0 based on Marlin" 2022-05-08 16:01:04,845 - octoprint.util.comm - INFO - Detected Prusa firmware, enabling relevant features for issue free communication 2022-05-08 16:01:04,868 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting 2022-05-08 16:01:05,332 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {'firmware_name': 'Prusa-Firmware 3.10.0 based on Marlin', 'printer_port': 'AUTO', 'printer_baudrate': 0} 2022-05-08 16:01:15,416 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.0.192 2022-05-08 16:01:21,407 - octoprint.plugins.camerasettings - INFO - Excluding camera bcm2835-isp-capture0 based on ^bcm2835-isp-\w+$ 2022-05-08 16:01:21,412 - octoprint.plugins.camerasettings - INFO - Excluding camera bcm2835-codec-isp based on ^bcm2835-codec-\w+$ 2022-05-08 16:01:21,415 - octoprint.plugins.camerasettings - INFO - Excluding camera bcm2835-codec-decode based on ^bcm2835-codec-\w+$ 2022-05-08 16:01:21,418 - octoprint.plugins.camerasettings - INFO - Excluding camera bcm2835-isp-capture1 based on ^bcm2835-isp-\w+$ 2022-05-08 16:01:21,421 - octoprint.plugins.camerasettings - INFO - Excluding camera bcm2835-isp-output0 based on ^bcm2835-isp-\w+$ 2022-05-08 16:01:21,424 - octoprint.plugins.camerasettings - INFO - Excluding camera bcm2835-codec-encode based on ^bcm2835-codec-\w+$ 2022-05-08 16:01:21,482 - octoprint.plugins.camerasettings - INFO - Excluding camera bcm2835-codec-image_fx based on ^bcm2835-codec-\w+$ 2022-05-08 16:01:21,485 - octoprint.plugins.camerasettings - INFO - Excluding camera bcm2835-isp-stats2 based on ^bcm2835-isp-\w+$ 2022-05-08 16:01:21,639 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 12, 'spoolName': 'Galaxy Silver', 'material': 'PLA', 'colorName': 'lightgrey', 'remainingWeight': 145.0}' to event-bus 2022-05-08 16:01:36,469 - octoprint.plugins.excluderegion - INFO - Setting update detected: g90InfluencesExtruder=False, clearRegionsAfterPrintFinishes=True, mayShrinkRegionsWhilePrinting=False, loggingMode=octoprint, enteringExcludedRegionGcode=None, exitingExcludedRegionGcode=None, extendedExcludeGcodes={'G4': {"gcode": "G4", "mode": "exclude", "description": "Ignore all dwell commands in an excluded area to reduce delays while excluding", "type": "ExcludedGcode"}, 'M117': {"gcode": "M117", "mode": "last", "description": "Suppress display messages while excluding and output the last message encountered when exiting the excluded area", "type": "ExcludedGcode"}, 'M204': {"gcode": "M204", "mode": "merge", "description": "Record default acceleration changes while excluding and apply the most recent values in a single command after exiting the excluded area", "type": "ExcludedGcode"}, 'M205': {"gcode": "M205", "mode": "merge", "description": "Record advanced setting changes while excluding and apply the most recent values in a single command after exiting the excluded area", "type": "ExcludedGcode"}, 'M73': {"gcode": "M73", "mode": "merge", "description": "Suppress progress updates while excluding and output the most recent progress values encountered when exiting the excluded area", "type": "ExcludedGcode"}}, atCommandActions={'ExcludeRegion': [{"command": "ExcludeRegion", "parameterPattern": "^\\s*(enable|on)(\\s|$)", "action": "enable_exclusion", "description": "Default action to enable exclusion", "type": "AtCommandAction"}, {"command": "ExcludeRegion", "parameterPattern": "^\\s*(disable|off)(\\s|$)", "action": "disable_exclusion", "description": "Default action to disable exclusion", "type": "AtCommandAction"}]} 2022-05-08 16:01:37,278 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2022-05-08 16:01:37,280 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://octopi.local:80/', 'accessToken': '1F3B7A663FB44EDCBDEF767FF98296E8'}, 'printer': {'name': 'Prusa MK3S+', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 185, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 30, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 15, 'useM600': True}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': False}, 'spoolManager': {'enabled': True}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'color': '#dcdde1', 'command': 'G28', 'confirm': False, 'exit': True, 'icon': 'home'}, {'color': '#4bae50', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/webcam', 'confirm': False, 'exit': False, 'icon': 'camera'}, {'color': '#e1b12c', 'command': 'M140 S50; M104 S185', 'confirm': False, 'exit': True, 'icon': 'fire-alt'}, {'color': '#0097e6', 'command': 'M140 S0; M104 S0', 'confirm': False, 'exit': True, 'icon': 'snowflake'}, {'color': '#0097e6', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/sleep', 'confirm': False, 'exit': False, 'icon': 'bed'}, {'color': '#FF0000', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/restart', 'confirm': True, 'exit': False, 'icon': 'power-off'}], 'fileSorting': {'attribute': 'date', 'order': 'dsc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': True, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2022-05-08 16:01:38,568 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2022-05-08 16:01:38,570 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://octopi.local:80/', 'accessToken': '1F3B7A663FB44EDCBDEF767FF98296E8'}, 'printer': {'name': 'Prusa MK3S+', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 185, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 30, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 15, 'useM600': True}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': False}, 'spoolManager': {'enabled': True}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'color': '#dcdde1', 'command': 'G28', 'confirm': False, 'exit': True, 'icon': 'home'}, {'color': '#4bae50', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/webcam', 'confirm': False, 'exit': False, 'icon': 'camera'}, {'color': '#e1b12c', 'command': 'M140 S50; M104 S185', 'confirm': False, 'exit': True, 'icon': 'fire-alt'}, {'color': '#0097e6', 'command': 'M140 S0; M104 S0', 'confirm': False, 'exit': True, 'icon': 'snowflake'}, {'color': '#0097e6', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/sleep', 'confirm': False, 'exit': False, 'icon': 'bed'}, {'color': '#FF0000', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/restart', 'confirm': True, 'exit': False, 'icon': 'power-off'}], 'fileSorting': {'attribute': 'date', 'order': 'dsc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': True, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2022-05-08 16:01:39,969 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2022-05-08 16:01:39,973 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://octopi.local:80/', 'accessToken': '1F3B7A663FB44EDCBDEF767FF98296E8'}, 'printer': {'name': 'Prusa MK3S+', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 185, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 30, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 15, 'useM600': True}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': False}, 'spoolManager': {'enabled': True}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'color': '#dcdde1', 'command': 'G28', 'confirm': False, 'exit': True, 'icon': 'home'}, {'color': '#4bae50', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/webcam', 'confirm': False, 'exit': False, 'icon': 'camera'}, {'color': '#e1b12c', 'command': 'M140 S50; M104 S185', 'confirm': False, 'exit': True, 'icon': 'fire-alt'}, {'color': '#0097e6', 'command': 'M140 S0; M104 S0', 'confirm': False, 'exit': True, 'icon': 'snowflake'}, {'color': '#0097e6', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/sleep', 'confirm': False, 'exit': False, 'icon': 'bed'}, {'color': '#FF0000', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/restart', 'confirm': True, 'exit': False, 'icon': 'power-off'}], 'fileSorting': {'attribute': 'date', 'order': 'dsc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': True, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2022-05-08 16:01:41,256 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2022-05-08 16:01:41,258 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://octopi.local:80/', 'accessToken': '1F3B7A663FB44EDCBDEF767FF98296E8'}, 'printer': {'name': 'Prusa MK3S+', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 185, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 30, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 15, 'useM600': True}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': False}, 'spoolManager': {'enabled': True}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'color': '#dcdde1', 'command': 'G28', 'confirm': False, 'exit': True, 'icon': 'home'}, {'color': '#4bae50', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/webcam', 'confirm': False, 'exit': False, 'icon': 'camera'}, {'color': '#e1b12c', 'command': 'M140 S50; M104 S185', 'confirm': False, 'exit': True, 'icon': 'fire-alt'}, {'color': '#0097e6', 'command': 'M140 S0; M104 S0', 'confirm': False, 'exit': True, 'icon': 'snowflake'}, {'color': '#0097e6', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/sleep', 'confirm': False, 'exit': False, 'icon': 'bed'}, {'color': '#FF0000', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/restart', 'confirm': True, 'exit': False, 'icon': 'power-off'}], 'fileSorting': {'attribute': 'date', 'order': 'dsc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': True, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2022-05-08 16:02:42,434 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2022-05-08 16:02:46,499 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 1819, 'printer_state': 'OPERATIONAL'} 2022-05-08 16:03:30,326 - octoprint.filemanager.analysis - INFO - Starting analysis of local:Whistle Ring size 12.5 (21.8mm)_0.25n_0.1mm_PLA_MK3S_1h6m.gcode 2022-05-08 16:03:30,430 - octoprint.printer.standard.job - INFO - Print job selected - origin: local, path: Whistle Ring size 12.5 (21.8mm)_0.25n_0.1mm_PLA_MK3S_1h6m.gcode, owner: _api, user: _api 2022-05-08 16:03:30,515 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Starting" 2022-05-08 16:03:30,518 - octoprint.printer.standard.job - INFO - Print job started - origin: local, path: Whistle Ring size 12.5 (21.8mm)_0.25n_0.1mm_PLA_MK3S_1h6m.gcode, owner: _api, user: _api 2022-05-08 16:03:30,589 - octoprint.plugins.octoeverywhere - ERROR - Failed to find time estimate from OctoPrint. int() argument must be a string, a bytes-like object or a number, not 'NoneType' 2022-05-08 16:03:30,810 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-05-08 16:03:30,824 - octoprint.util.comm - INFO - Changing monitoring state from "Starting" to "Printing" 2022-05-08 16:03:31,091 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 12, 'spoolName': 'Galaxy Silver', 'material': 'PLA', 'colorName': 'lightgrey', 'remainingWeight': 145.0}' to event-bus 2022-05-08 16:03:31,126 - octoprint.plugins.DisplayLayerProgress - INFO - File '/home/pi/.octoprint/uploads/Whistle Ring size 12.5 (21.8mm)_0.25n_0.1mm_PLA_MK3S_1h6m.gcode' selected. Determining number of layers. 2022-05-08 16:03:31,140 - octoprint.plugins.DisplayLayerProgress - INFO - Read total height from MetaFile 2022-05-08 16:03:31,146 - octoprint.plugins.DisplayLayerProgress - INFO - Total height not found in MetaFile 2022-05-08 16:03:33,790 - octoprint.plugins.DisplayLayerProgress - INFO - Store layer count in MetaFile 2022-05-08 16:03:34,105 - octoprint.plugins.DisplayLayerProgress - INFO - File select-event processing done!' 2022-05-08 16:03:34,133 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 12, 'spoolName': 'Galaxy Silver', 'material': 'PLA', 'colorName': 'lightgrey', 'remainingWeight': 145.0}' to event-bus 2022-05-08 16:03:34,143 - octoprint.plugins.excluderegion - INFO - File selected, resetting internal state 2022-05-08 16:03:34,230 - octoprint.plugins.DisplayLayerProgress - INFO - Printing started. Detailed progress started.{'name': 'Whistle Ring size 12.5 (21.8mm)_0.25n_0.1mm_PLA_MK3S_1h6m.gcode', 'path': 'Whistle Ring size 12.5 (21.8mm)_0.25n_0.1mm_PLA_MK3S_1h6m.gcode', 'origin': 'local', 'size': 3770143, 'owner': '_api', 'user': '_api'} 2022-05-08 16:03:34,257 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 12, 'spoolName': 'Galaxy Silver', 'material': 'PLA', 'colorName': 'lightgrey', 'remainingWeight': 145.0}' to event-bus 2022-05-08 16:03:34,263 - octoprint.plugins.excluderegion - INFO - Printing started 2022-05-08 16:03:34,273 - octoprint.plugins.octoeverywhere - ERROR - Failed to find time estimate from OctoPrint. int() argument must be a string, a bytes-like object or a number, not 'NoneType' 2022-05-08 16:03:34,281 - octoprint.plugins.octoeverywhere - ERROR - Failed to find time estimate from OctoPrint. int() argument must be a string, a bytes-like object or a number, not 'NoneType' 2022-05-08 16:03:34,706 - octoprint.plugins.tracking - INFO - Sent tracking event print_started, payload: {'origin': 'local', 'file': '1b00a99a93738339ea8cfb4e4c465bd44df4b419'} 2022-05-08 16:03:34,998 - octoprint.plugins.octoeverywhere - INFO - NotificationsHandler successfully sent 'started'; ETA: -1 2022-05-08 16:03:35,921 - octoprint.filemanager.analysis - INFO - Analysis of entry local:Whistle Ring size 12.5 (21.8mm)_0.25n_0.1mm_PLA_MK3S_1h6m.gcode finished, needed 5.60s 2022-05-08 16:04:43,783 - octoprint.util.comm - INFO - Printer seems to support the busy protocol, will adjust timeouts and set busy interval accordingly 2022-05-08 16:04:49,956 - octoprint.util.comm - INFO - Telling the printer to set the busy interval to our "communicationBusy" timeout - 1s = 2s 2022-05-08 16:05:06,379 - octoprint.plugins.octoeverywhere - INFO - NotificationsHandler successfully sent 'firstlayerdone'; ETA: 3917 2022-05-08 16:10:17,105 - octoprint.plugins.octoeverywhere - INFO - NotificationsHandler successfully sent 'progress'; ETA: 3608 2022-05-08 16:13:27,522 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.0.192 2022-05-08 16:13:27,595 - octoprint.server.util.flask - INFO - Passively logging in user ssenrah from ::ffff:192.168.0.192 2022-05-08 16:13:27,596 - octoprint.access.users - INFO - Logged in user: ssenrah 2022-05-08 16:13:27,628 - octoprint.server.util.sockjs - INFO - User ssenrah logged in on the socket from client ::ffff:192.168.0.192 2022-05-08 16:13:29,140 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2022-05-08 16:13:29,149 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://octopi.local:80/', 'accessToken': '1F3B7A663FB44EDCBDEF767FF98296E8'}, 'printer': {'name': 'Prusa MK3S+', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 185, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 30, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 15, 'useM600': True}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': False}, 'spoolManager': {'enabled': True}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'color': '#dcdde1', 'command': 'G28', 'confirm': False, 'exit': True, 'icon': 'home'}, {'color': '#4bae50', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/webcam', 'confirm': False, 'exit': False, 'icon': 'camera'}, {'color': '#e1b12c', 'command': 'M140 S50; M104 S185', 'confirm': False, 'exit': True, 'icon': 'fire-alt'}, {'color': '#0097e6', 'command': 'M140 S0; M104 S0', 'confirm': False, 'exit': True, 'icon': 'snowflake'}, {'color': '#0097e6', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/sleep', 'confirm': False, 'exit': False, 'icon': 'bed'}, {'color': '#FF0000', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/restart', 'confirm': True, 'exit': False, 'icon': 'power-off'}], 'fileSorting': {'attribute': 'date', 'order': 'dsc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': True, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2022-05-08 16:13:30,614 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2022-05-08 16:13:30,619 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://octopi.local:80/', 'accessToken': '1F3B7A663FB44EDCBDEF767FF98296E8'}, 'printer': {'name': 'Prusa MK3S+', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 185, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 30, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 15, 'useM600': True}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': False}, 'spoolManager': {'enabled': True}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'color': '#dcdde1', 'command': 'G28', 'confirm': False, 'exit': True, 'icon': 'home'}, {'color': '#4bae50', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/webcam', 'confirm': False, 'exit': False, 'icon': 'camera'}, {'color': '#e1b12c', 'command': 'M140 S50; M104 S185', 'confirm': False, 'exit': True, 'icon': 'fire-alt'}, {'color': '#0097e6', 'command': 'M140 S0; M104 S0', 'confirm': False, 'exit': True, 'icon': 'snowflake'}, {'color': '#0097e6', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/sleep', 'confirm': False, 'exit': False, 'icon': 'bed'}, {'color': '#FF0000', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/restart', 'confirm': True, 'exit': False, 'icon': 'power-off'}], 'fileSorting': {'attribute': 'date', 'order': 'dsc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': True, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2022-05-08 16:13:30,626 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 12, 'spoolName': 'Galaxy Silver', 'material': 'PLA', 'colorName': 'lightgrey', 'remainingWeight': 145.0}' to event-bus 2022-05-08 16:13:30,749 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 12, 'spoolName': 'Galaxy Silver', 'material': 'PLA', 'colorName': 'lightgrey', 'remainingWeight': 145.0}' to event-bus 2022-05-08 16:13:30,775 - octoprint.plugins.SpoolManager - INFO - tool0, requiredWeight '2.4102001345410446', remainingWeight '145.0' 2022-05-08 16:13:32,166 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2022-05-08 16:13:32,168 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://octopi.local:80/', 'accessToken': '1F3B7A663FB44EDCBDEF767FF98296E8'}, 'printer': {'name': 'Prusa MK3S+', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 185, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 30, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 15, 'useM600': True}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': False}, 'spoolManager': {'enabled': True}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'color': '#dcdde1', 'command': 'G28', 'confirm': False, 'exit': True, 'icon': 'home'}, {'color': '#4bae50', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/webcam', 'confirm': False, 'exit': False, 'icon': 'camera'}, {'color': '#e1b12c', 'command': 'M140 S50; M104 S185', 'confirm': False, 'exit': True, 'icon': 'fire-alt'}, {'color': '#0097e6', 'command': 'M140 S0; M104 S0', 'confirm': False, 'exit': True, 'icon': 'snowflake'}, {'color': '#0097e6', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/sleep', 'confirm': False, 'exit': False, 'icon': 'bed'}, {'color': '#FF0000', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/restart', 'confirm': True, 'exit': False, 'icon': 'power-off'}], 'fileSorting': {'attribute': 'date', 'order': 'dsc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': True, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2022-05-08 16:13:32,874 - octoprint.plugins.octoapp - INFO - Registered app ejT4cX2-SACXplNsGGmMmx:APA91bGhvQzBO-UWwpyXk0cE-b5gbIF2tQ--cVLXogwoiPjpqOmdX0b9t3_4U1GTCDFJ2tZDeUonMb5wjFucuhPx2zQm5NnVvSP6DeRLZl-dBtz_68ggmmrkdmlo50TFP6mwlW-igs50 2022-05-08 16:13:41,365 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.0.192 2022-05-08 16:13:55,730 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.0.192 2022-05-08 16:13:55,795 - octoprint.server.util.flask - INFO - Passively logging in user ssenrah from ::ffff:192.168.0.192 2022-05-08 16:13:55,796 - octoprint.access.users - INFO - Logged in user: ssenrah 2022-05-08 16:13:55,953 - octoprint.server.util.sockjs - INFO - User ssenrah logged in on the socket from client ::ffff:192.168.0.192 2022-05-08 16:13:57,910 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2022-05-08 16:13:57,918 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://octopi.local:80/', 'accessToken': '1F3B7A663FB44EDCBDEF767FF98296E8'}, 'printer': {'name': 'Prusa MK3S+', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 185, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 30, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 15, 'useM600': True}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': False}, 'spoolManager': {'enabled': True}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'color': '#dcdde1', 'command': 'G28', 'confirm': False, 'exit': True, 'icon': 'home'}, {'color': '#4bae50', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/webcam', 'confirm': False, 'exit': False, 'icon': 'camera'}, {'color': '#e1b12c', 'command': 'M140 S50; M104 S185', 'confirm': False, 'exit': True, 'icon': 'fire-alt'}, {'color': '#0097e6', 'command': 'M140 S0; M104 S0', 'confirm': False, 'exit': True, 'icon': 'snowflake'}, {'color': '#0097e6', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/sleep', 'confirm': False, 'exit': False, 'icon': 'bed'}, {'color': '#FF0000', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/restart', 'confirm': True, 'exit': False, 'icon': 'power-off'}], 'fileSorting': {'attribute': 'date', 'order': 'dsc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': True, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2022-05-08 16:13:58,531 - octoprint.plugins.octoapp - INFO - Registered app ejT4cX2-SACXplNsGGmMmx:APA91bGhvQzBO-UWwpyXk0cE-b5gbIF2tQ--cVLXogwoiPjpqOmdX0b9t3_4U1GTCDFJ2tZDeUonMb5wjFucuhPx2zQm5NnVvSP6DeRLZl-dBtz_68ggmmrkdmlo50TFP6mwlW-igs50 2022-05-08 16:13:58,784 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 12, 'spoolName': 'Galaxy Silver', 'material': 'PLA', 'colorName': 'lightgrey', 'remainingWeight': 145.0}' to event-bus 2022-05-08 16:13:58,858 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 12, 'spoolName': 'Galaxy Silver', 'material': 'PLA', 'colorName': 'lightgrey', 'remainingWeight': 145.0}' to event-bus 2022-05-08 16:13:58,864 - octoprint.plugins.SpoolManager - INFO - tool0, requiredWeight '2.4102001345410446', remainingWeight '145.0' 2022-05-08 16:14:02,671 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.0.192 2022-05-08 16:15:17,168 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.0.192 2022-05-08 16:15:17,271 - octoprint.server.util.flask - INFO - Passively logging in user ssenrah from ::ffff:192.168.0.192 2022-05-08 16:15:17,274 - octoprint.access.users - INFO - Logged in user: ssenrah 2022-05-08 16:15:17,306 - octoprint.server.util.sockjs - INFO - User ssenrah logged in on the socket from client ::ffff:192.168.0.192 2022-05-08 16:15:20,242 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 12, 'spoolName': 'Galaxy Silver', 'material': 'PLA', 'colorName': 'lightgrey', 'remainingWeight': 145.0}' to event-bus 2022-05-08 16:15:20,282 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 12, 'spoolName': 'Galaxy Silver', 'material': 'PLA', 'colorName': 'lightgrey', 'remainingWeight': 145.0}' to event-bus 2022-05-08 16:15:20,300 - octoprint.plugins.SpoolManager - INFO - tool0, requiredWeight '2.4102001345410446', remainingWeight '145.0' 2022-05-08 16:15:23,910 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.0.192 2022-05-08 16:17:24,626 - octoprint.plugins.octoeverywhere - INFO - NotificationsHandler successfully sent 'progress'; ETA: 3188 2022-05-08 16:17:42,438 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2022-05-08 16:17:46,507 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 2719, 'printer_state': 'PRINTING'} 2022-05-08 16:19:58,071 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.0.125 2022-05-08 16:24:17,208 - octoprint.plugins.octoeverywhere - INFO - NotificationsHandler successfully sent 'progress'; ETA: 2780 2022-05-08 16:31:02,493 - octoprint.plugins.octoeverywhere - INFO - NotificationsHandler successfully sent 'progress'; ETA: 2383 2022-05-08 16:31:55,755 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.0.192 2022-05-08 16:31:55,813 - octoprint.server.util.flask - INFO - Passively logging in user ssenrah from ::ffff:192.168.0.192 2022-05-08 16:31:55,814 - octoprint.access.users - INFO - Logged in user: ssenrah 2022-05-08 16:31:55,843 - octoprint.server.util.sockjs - INFO - User ssenrah logged in on the socket from client ::ffff:192.168.0.192 2022-05-08 16:31:57,000 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2022-05-08 16:31:57,008 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://octopi.local:80/', 'accessToken': '1F3B7A663FB44EDCBDEF767FF98296E8'}, 'printer': {'name': 'Prusa MK3S+', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 185, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 30, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 15, 'useM600': True}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': False}, 'spoolManager': {'enabled': True}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'color': '#dcdde1', 'command': 'G28', 'confirm': False, 'exit': True, 'icon': 'home'}, {'color': '#4bae50', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/webcam', 'confirm': False, 'exit': False, 'icon': 'camera'}, {'color': '#e1b12c', 'command': 'M140 S50; M104 S185', 'confirm': False, 'exit': True, 'icon': 'fire-alt'}, {'color': '#0097e6', 'command': 'M140 S0; M104 S0', 'confirm': False, 'exit': True, 'icon': 'snowflake'}, {'color': '#0097e6', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/sleep', 'confirm': False, 'exit': False, 'icon': 'bed'}, {'color': '#FF0000', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/restart', 'confirm': True, 'exit': False, 'icon': 'power-off'}], 'fileSorting': {'attribute': 'date', 'order': 'dsc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': True, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2022-05-08 16:31:57,526 - octoprint.plugins.octoapp - INFO - Registered app ejT4cX2-SACXplNsGGmMmx:APA91bGhvQzBO-UWwpyXk0cE-b5gbIF2tQ--cVLXogwoiPjpqOmdX0b9t3_4U1GTCDFJ2tZDeUonMb5wjFucuhPx2zQm5NnVvSP6DeRLZl-dBtz_68ggmmrkdmlo50TFP6mwlW-igs50 2022-05-08 16:31:58,812 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 12, 'spoolName': 'Galaxy Silver', 'material': 'PLA', 'colorName': 'lightgrey', 'remainingWeight': 145.0}' to event-bus 2022-05-08 16:31:58,845 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 12, 'spoolName': 'Galaxy Silver', 'material': 'PLA', 'colorName': 'lightgrey', 'remainingWeight': 145.0}' to event-bus 2022-05-08 16:31:58,851 - octoprint.plugins.SpoolManager - INFO - tool0, requiredWeight '2.4102001345410446', remainingWeight '145.0' 2022-05-08 16:32:42,439 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2022-05-08 16:32:46,470 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 3619, 'printer_state': 'PRINTING'} 2022-05-08 16:36:42,144 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.0.192 2022-05-08 16:37:42,755 - octoprint.plugins.octoeverywhere - INFO - NotificationsHandler successfully sent 'progress'; ETA: 1997 2022-05-08 16:37:47,611 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.0.192 2022-05-08 16:37:47,684 - octoprint.server.util.flask - INFO - Passively logging in user ssenrah from ::ffff:192.168.0.192 2022-05-08 16:37:47,685 - octoprint.access.users - INFO - Logged in user: ssenrah 2022-05-08 16:37:47,725 - octoprint.server.util.sockjs - INFO - User ssenrah logged in on the socket from client ::ffff:192.168.0.192 2022-05-08 16:37:50,660 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 12, 'spoolName': 'Galaxy Silver', 'material': 'PLA', 'colorName': 'lightgrey', 'remainingWeight': 145.0}' to event-bus 2022-05-08 16:37:50,685 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 12, 'spoolName': 'Galaxy Silver', 'material': 'PLA', 'colorName': 'lightgrey', 'remainingWeight': 145.0}' to event-bus 2022-05-08 16:37:50,689 - octoprint.plugins.SpoolManager - INFO - tool0, requiredWeight '2.4102001345410446', remainingWeight '145.0' 2022-05-08 16:38:03,899 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.0.192 2022-05-08 16:42:07,833 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.0.192 2022-05-08 16:42:07,904 - octoprint.server.util.flask - INFO - Passively logging in user ssenrah from ::ffff:192.168.0.192 2022-05-08 16:42:07,908 - octoprint.access.users - INFO - Logged in user: ssenrah 2022-05-08 16:42:07,939 - octoprint.server.util.sockjs - INFO - User ssenrah logged in on the socket from client ::ffff:192.168.0.192 2022-05-08 16:42:10,901 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 12, 'spoolName': 'Galaxy Silver', 'material': 'PLA', 'colorName': 'lightgrey', 'remainingWeight': 145.0}' to event-bus 2022-05-08 16:42:10,946 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 12, 'spoolName': 'Galaxy Silver', 'material': 'PLA', 'colorName': 'lightgrey', 'remainingWeight': 145.0}' to event-bus 2022-05-08 16:42:10,952 - octoprint.plugins.SpoolManager - INFO - tool0, requiredWeight '2.4102001345410446', remainingWeight '145.0' 2022-05-08 16:42:21,221 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.0.192 2022-05-08 16:44:22,707 - octoprint.plugins.octoeverywhere - INFO - NotificationsHandler successfully sent 'progress'; ETA: 1610 2022-05-08 16:47:42,444 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2022-05-08 16:47:46,533 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 4519, 'printer_state': 'PRINTING'} 2022-05-08 16:47:50,170 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.0.192 2022-05-08 16:47:50,239 - octoprint.server.util.flask - INFO - Passively logging in user ssenrah from ::ffff:192.168.0.192 2022-05-08 16:47:50,240 - octoprint.access.users - INFO - Logged in user: ssenrah 2022-05-08 16:47:50,286 - octoprint.server.util.sockjs - INFO - User ssenrah logged in on the socket from client ::ffff:192.168.0.192 2022-05-08 16:47:53,231 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 12, 'spoolName': 'Galaxy Silver', 'material': 'PLA', 'colorName': 'lightgrey', 'remainingWeight': 145.0}' to event-bus 2022-05-08 16:47:53,275 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 12, 'spoolName': 'Galaxy Silver', 'material': 'PLA', 'colorName': 'lightgrey', 'remainingWeight': 145.0}' to event-bus 2022-05-08 16:47:53,281 - octoprint.plugins.SpoolManager - INFO - tool0, requiredWeight '2.4102001345410446', remainingWeight '145.0' 2022-05-08 16:47:55,790 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.0.192 2022-05-08 16:51:02,254 - octoprint.plugins.octoeverywhere - INFO - NotificationsHandler successfully sent 'progress'; ETA: 1215 2022-05-08 16:54:45,443 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.0.192 2022-05-08 16:54:45,527 - octoprint.server.util.flask - INFO - Passively logging in user ssenrah from ::ffff:192.168.0.192 2022-05-08 16:54:45,528 - octoprint.access.users - INFO - Logged in user: ssenrah 2022-05-08 16:54:45,671 - octoprint.server.util.sockjs - INFO - User ssenrah logged in on the socket from client ::ffff:192.168.0.192 2022-05-08 16:54:48,511 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 12, 'spoolName': 'Galaxy Silver', 'material': 'PLA', 'colorName': 'lightgrey', 'remainingWeight': 145.0}' to event-bus 2022-05-08 16:54:48,550 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 12, 'spoolName': 'Galaxy Silver', 'material': 'PLA', 'colorName': 'lightgrey', 'remainingWeight': 145.0}' to event-bus 2022-05-08 16:54:48,557 - octoprint.plugins.SpoolManager - INFO - tool0, requiredWeight '2.4102001345410446', remainingWeight '145.0' 2022-05-08 16:55:58,312 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.0.192 2022-05-08 16:57:47,334 - octoprint.plugins.octoeverywhere - INFO - NotificationsHandler successfully sent 'progress'; ETA: 811 2022-05-08 16:58:53,091 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.0.192 2022-05-08 16:58:53,165 - octoprint.server.util.flask - INFO - Passively logging in user ssenrah from ::ffff:192.168.0.192 2022-05-08 16:58:53,167 - octoprint.access.users - INFO - Logged in user: ssenrah 2022-05-08 16:58:53,202 - octoprint.server.util.sockjs - INFO - User ssenrah logged in on the socket from client ::ffff:192.168.0.192 2022-05-08 16:58:56,158 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 12, 'spoolName': 'Galaxy Silver', 'material': 'PLA', 'colorName': 'lightgrey', 'remainingWeight': 145.0}' to event-bus 2022-05-08 16:58:56,460 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 12, 'spoolName': 'Galaxy Silver', 'material': 'PLA', 'colorName': 'lightgrey', 'remainingWeight': 145.0}' to event-bus 2022-05-08 16:58:56,466 - octoprint.plugins.SpoolManager - INFO - tool0, requiredWeight '2.4102001345410446', remainingWeight '145.0' 2022-05-08 16:59:07,279 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.0.192 2022-05-08 16:59:31,836 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.0.192 2022-05-08 16:59:31,915 - octoprint.server.util.flask - INFO - Passively logging in user ssenrah from ::ffff:192.168.0.192 2022-05-08 16:59:31,916 - octoprint.access.users - INFO - Logged in user: ssenrah 2022-05-08 16:59:31,994 - octoprint.server.util.sockjs - INFO - User ssenrah logged in on the socket from client ::ffff:192.168.0.192 2022-05-08 16:59:34,902 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 12, 'spoolName': 'Galaxy Silver', 'material': 'PLA', 'colorName': 'lightgrey', 'remainingWeight': 145.0}' to event-bus 2022-05-08 16:59:34,938 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 12, 'spoolName': 'Galaxy Silver', 'material': 'PLA', 'colorName': 'lightgrey', 'remainingWeight': 145.0}' to event-bus 2022-05-08 16:59:34,945 - octoprint.plugins.SpoolManager - INFO - tool0, requiredWeight '2.4102001345410446', remainingWeight '145.0' 2022-05-08 16:59:52,879 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.0.192 2022-05-08 17:02:42,445 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2022-05-08 17:02:46,537 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 5419, 'printer_state': 'PRINTING'} 2022-05-08 17:03:34,712 - octoprint.plugins.octoeverywhere - INFO - NotificationsHandler successfully sent 'timerprogress'; ETA: 476 2022-05-08 17:05:10,378 - octoprint.plugins.octoeverywhere - INFO - NotificationsHandler successfully sent 'progress'; ETA: 385 2022-05-08 17:05:49,550 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.0.192 2022-05-08 17:05:49,608 - octoprint.server.util.flask - INFO - Passively logging in user ssenrah from ::ffff:192.168.0.192 2022-05-08 17:05:49,610 - octoprint.access.users - INFO - Logged in user: ssenrah 2022-05-08 17:05:49,765 - octoprint.server.util.sockjs - INFO - User ssenrah logged in on the socket from client ::ffff:192.168.0.192 2022-05-08 17:05:52,605 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 12, 'spoolName': 'Galaxy Silver', 'material': 'PLA', 'colorName': 'lightgrey', 'remainingWeight': 145.0}' to event-bus 2022-05-08 17:05:52,637 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 12, 'spoolName': 'Galaxy Silver', 'material': 'PLA', 'colorName': 'lightgrey', 'remainingWeight': 145.0}' to event-bus 2022-05-08 17:05:52,645 - octoprint.plugins.SpoolManager - INFO - tool0, requiredWeight '2.4102001345410446', remainingWeight '145.0' 2022-05-08 17:06:38,677 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.0.192 2022-05-08 17:11:28,284 - octoprint.util.comm - INFO - Finished in 4077.803 s. 2022-05-08 17:11:28,285 - octoprint.util.comm - INFO - Changing monitoring state from "Printing" to "Finishing" 2022-05-08 17:11:28,295 - octoprint.printer.standard.job - INFO - Print job done - origin: local, path: Whistle Ring size 12.5 (21.8mm)_0.25n_0.1mm_PLA_MK3S_1h6m.gcode, owner: _api 2022-05-08 17:11:28,398 - octoprint.plugins.DisplayLayerProgress - INFO - Printing stopped. Detailed progress stopped. 2022-05-08 17:11:28,566 - octoprint.util.comm - INFO - Changing monitoring state from "Finishing" to "Operational" 2022-05-08 17:11:28,736 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 12, 'spoolName': 'Galaxy Silver', 'material': 'PLA', 'colorName': 'lightgrey', 'remainingWeight': 145.0}' to event-bus 2022-05-08 17:11:28,737 - octoprint.plugins.SpoolManager - INFO - Tool 0: Extruded filament length: 842.3523699998971 2022-05-08 17:11:28,737 - octoprint.plugins.SpoolManager - INFO - Tool 0: Current Spool used filament length: 286667 2022-05-08 17:11:28,737 - octoprint.plugins.SpoolManager - INFO - Tool 0: New Spool used filament length: 287509.3523699999 2022-05-08 17:11:28,737 - octoprint.plugins.SpoolManager - INFO - Tool 0: spoolUsedWeight: 855.0 2022-05-08 17:11:28,738 - octoprint.plugins.SpoolManager - INFO - Tool 0: New spoolUsedWeight: 857.5123576614485 2022-05-08 17:11:28,870 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_weight_updated_after_print' with payload '{'toolId': 0, 'databaseId': 12, 'spoolName': 'Galaxy Silver', 'material': 'PLA', 'colorName': 'lightgrey', 'remainingWeight': 142.4876423385515}' to event-bus 2022-05-08 17:11:28,887 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 12, 'spoolName': 'Galaxy Silver', 'material': 'PLA', 'colorName': 'lightgrey', 'remainingWeight': 142.4876423385515}' to event-bus 2022-05-08 17:11:28,892 - octoprint.plugins.SpoolManager - INFO - tool0, requiredWeight '2.4102001345410446', remainingWeight '142.4876423385515' 2022-05-08 17:11:28,897 - octoprint.plugins.excluderegion - INFO - Printing stopped: event=PrintDone 2022-05-08 17:11:28,920 - octoprint.plugins.octoeverywhere - INFO - RepeatTimer thread exit 2022-05-08 17:11:28,953 - octoprint.plugins.ipOnConnect - INFO - ipOnConnectPlugin: M117 192.168.0.158 2022-05-08 17:11:28,989 - octoprint.plugins.tracking - INFO - Sent tracking event print_done, payload: {'origin': 'local', 'file': '1b00a99a93738339ea8cfb4e4c465bd44df4b419', 'elapsed': 4077} 2022-05-08 17:11:29,679 - octoprint.plugins.octoeverywhere - INFO - NotificationsHandler successfully sent 'done'; ETA: 0 2022-05-08 17:11:32,554 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.0.192 2022-05-08 17:11:32,615 - octoprint.server.util.flask - INFO - Passively logging in user ssenrah from ::ffff:192.168.0.192 2022-05-08 17:11:32,616 - octoprint.access.users - INFO - Logged in user: ssenrah 2022-05-08 17:11:32,653 - octoprint.server.util.sockjs - INFO - User ssenrah logged in on the socket from client ::ffff:192.168.0.192 2022-05-08 17:11:35,624 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 12, 'spoolName': 'Galaxy Silver', 'material': 'PLA', 'colorName': 'lightgrey', 'remainingWeight': 142.4876423385515}' to event-bus 2022-05-08 17:11:35,674 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 12, 'spoolName': 'Galaxy Silver', 'material': 'PLA', 'colorName': 'lightgrey', 'remainingWeight': 142.4876423385515}' to event-bus 2022-05-08 17:11:35,681 - octoprint.plugins.SpoolManager - INFO - tool0, requiredWeight '2.4102001345410446', remainingWeight '142.4876423385515' 2022-05-08 17:11:35,866 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.0.192 2022-05-08 17:17:42,446 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2022-05-08 17:17:46,510 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 6319, 'printer_state': 'OPERATIONAL'} 2022-05-08 17:32:42,448 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2022-05-08 17:32:46,505 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 7219, 'printer_state': 'OPERATIONAL'} 2022-05-08 17:47:42,450 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2022-05-08 17:47:46,513 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 8119, 'printer_state': 'OPERATIONAL'} 2022-05-08 17:55:30,594 - octoprint.plugins.octoeverywhere - ERROR - OctoEverywhere Ws error: Connection is already closed. 2022-05-08 17:55:30,596 - octoprint.plugins.octoeverywhere - INFO - Service websocket closed. 2022-05-08 17:55:30,609 - octoprint.plugins.octoeverywhere - INFO - Disconnected from OctoEverywhere, server con wss://starport-v1.octoeverywhere.com/octoclientws[1] 2022-05-08 17:55:30,610 - octoprint.plugins.octoeverywhere - INFO - Closing all open web stream sockets (0) 2022-05-08 17:55:30,611 - octoprint.plugins.octoeverywhere - INFO - Sleeping for 8 seconds before trying again. 2022-05-08 17:55:38,620 - octoprint.plugins.octoeverywhere - INFO - Attempting to talk to OctoEverywhere, server con wss://starport-v1.octoeverywhere.com/octoclientws[2] 2022-05-08 17:55:40,235 - octoprint.plugins.octoeverywhere - INFO - Connected To OctoEverywhere, server con wss://starport-v1.octoeverywhere.com/octoclientws[2]. Starting handshake... 2022-05-08 17:56:11,890 - octoprint.plugins.octoeverywhere - INFO - Handshake complete, server con wss://starport-v1.octoeverywhere.com/octoclientws[2], successfully connected to OctoEverywhere! 2022-05-08 18:02:42,451 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2022-05-08 18:02:46,512 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 9019, 'printer_state': 'OPERATIONAL'} 2022-05-08 18:17:42,454 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2022-05-08 18:17:46,536 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 9919, 'printer_state': 'OPERATIONAL'} 2022-05-08 18:26:00,895 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.0.125 2022-05-08 18:26:01,041 - octoprint.server.util.flask - INFO - Passively logging in user ssenrah from ::ffff:192.168.0.125 2022-05-08 18:26:01,042 - octoprint.access.users - INFO - Logged in user: ssenrah 2022-05-08 18:26:01,079 - octoprint.server.util.sockjs - INFO - User ssenrah logged in on the socket from client ::ffff:192.168.0.125 2022-05-08 18:26:04,057 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 12, 'spoolName': 'Galaxy Silver', 'material': 'PLA', 'colorName': 'lightgrey', 'remainingWeight': 142.4876423385515}' to event-bus 2022-05-08 18:26:04,090 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 12, 'spoolName': 'Galaxy Silver', 'material': 'PLA', 'colorName': 'lightgrey', 'remainingWeight': 142.4876423385515}' to event-bus 2022-05-08 18:26:04,098 - octoprint.plugins.SpoolManager - INFO - tool0, requiredWeight '2.4102001345410446', remainingWeight '142.4876423385515' 2022-05-08 18:32:16,534 - octoprint.server.util.flask - INFO - Passively logging in user ssenrah from ::ffff:192.168.0.125 2022-05-08 18:32:16,536 - octoprint.access.users - INFO - Logged in user: ssenrah 2022-05-08 18:32:16,666 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.0.125 2022-05-08 18:32:17,019 - octoprint.plugins.octoeverywhere - INFO - SetFrontendLocalPort API called. Port:80 IsHttps:False URL:http://192.168.0.158/#temp 2022-05-08 18:32:17,384 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 12, 'spoolName': 'Galaxy Silver', 'material': 'PLA', 'colorName': 'lightgrey', 'remainingWeight': 142.4876423385515}' to event-bus 2022-05-08 18:32:17,487 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.0.125 2022-05-08 18:32:17,613 - octoprint.server.util.flask - INFO - Passively logging in user ssenrah from ::ffff:192.168.0.125 2022-05-08 18:32:17,614 - octoprint.access.users - INFO - Logged in user: ssenrah 2022-05-08 18:32:18,457 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2022-05-08 18:32:18,460 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://octopi.local:80/', 'accessToken': '1F3B7A663FB44EDCBDEF767FF98296E8'}, 'printer': {'name': 'Prusa MK3S+', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 185, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 30, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 15, 'useM600': True}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': False}, 'spoolManager': {'enabled': True}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'color': '#dcdde1', 'command': 'G28', 'confirm': False, 'exit': True, 'icon': 'home'}, {'color': '#4bae50', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/webcam', 'confirm': False, 'exit': False, 'icon': 'camera'}, {'color': '#e1b12c', 'command': 'M140 S50; M104 S185', 'confirm': False, 'exit': True, 'icon': 'fire-alt'}, {'color': '#0097e6', 'command': 'M140 S0; M104 S0', 'confirm': False, 'exit': True, 'icon': 'snowflake'}, {'color': '#0097e6', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/sleep', 'confirm': False, 'exit': False, 'icon': 'bed'}, {'color': '#FF0000', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/restart', 'confirm': True, 'exit': False, 'icon': 'power-off'}], 'fileSorting': {'attribute': 'date', 'order': 'dsc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': True, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2022-05-08 18:32:19,732 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2022-05-08 18:32:19,735 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://octopi.local:80/', 'accessToken': '1F3B7A663FB44EDCBDEF767FF98296E8'}, 'printer': {'name': 'Prusa MK3S+', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 185, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 30, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 15, 'useM600': True}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': False}, 'spoolManager': {'enabled': True}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'color': '#dcdde1', 'command': 'G28', 'confirm': False, 'exit': True, 'icon': 'home'}, {'color': '#4bae50', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/webcam', 'confirm': False, 'exit': False, 'icon': 'camera'}, {'color': '#e1b12c', 'command': 'M140 S50; M104 S185', 'confirm': False, 'exit': True, 'icon': 'fire-alt'}, {'color': '#0097e6', 'command': 'M140 S0; M104 S0', 'confirm': False, 'exit': True, 'icon': 'snowflake'}, {'color': '#0097e6', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/sleep', 'confirm': False, 'exit': False, 'icon': 'bed'}, {'color': '#FF0000', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/restart', 'confirm': True, 'exit': False, 'icon': 'power-off'}], 'fileSorting': {'attribute': 'date', 'order': 'dsc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': True, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2022-05-08 18:32:20,637 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 12, 'spoolName': 'Galaxy Silver', 'material': 'PLA', 'colorName': 'lightgrey', 'remainingWeight': 142.4876423385515}' to event-bus 2022-05-08 18:32:20,663 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 12, 'spoolName': 'Galaxy Silver', 'material': 'PLA', 'colorName': 'lightgrey', 'remainingWeight': 142.4876423385515}' to event-bus 2022-05-08 18:32:20,668 - octoprint.plugins.SpoolManager - INFO - tool0, requiredWeight '2.4102001345410446', remainingWeight '142.4876423385515' 2022-05-08 18:32:20,724 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 12, 'spoolName': 'Galaxy Silver', 'material': 'PLA', 'colorName': 'lightgrey', 'remainingWeight': 142.4876423385515}' to event-bus 2022-05-08 18:32:20,820 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 12, 'spoolName': 'Galaxy Silver', 'material': 'PLA', 'colorName': 'lightgrey', 'remainingWeight': 142.4876423385515}' to event-bus 2022-05-08 18:32:20,848 - octoprint.plugins.SpoolManager - INFO - API generate QR code for Spool with databaseId: qrPreviewId 2022-05-08 18:32:21,322 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 12, 'spoolName': 'Galaxy Silver', 'material': 'PLA', 'colorName': 'lightgrey', 'remainingWeight': 142.4876423385515}' to event-bus 2022-05-08 18:32:21,419 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 12, 'spoolName': 'Galaxy Silver', 'material': 'PLA', 'colorName': 'lightgrey', 'remainingWeight': 142.4876423385515}' to event-bus 2022-05-08 18:32:21,534 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 12, 'spoolName': 'Galaxy Silver', 'material': 'PLA', 'colorName': 'lightgrey', 'remainingWeight': 142.4876423385515}' to event-bus 2022-05-08 18:32:21,635 - octoprint.server.util.sockjs - INFO - User ssenrah logged in on the socket from client ::ffff:192.168.0.125 2022-05-08 18:32:22,433 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 12, 'spoolName': 'Galaxy Silver', 'material': 'PLA', 'colorName': 'lightgrey', 'remainingWeight': 142.4876423385515}' to event-bus 2022-05-08 18:32:23,288 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2022-05-08 18:32:23,290 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://octopi.local:80/', 'accessToken': '1F3B7A663FB44EDCBDEF767FF98296E8'}, 'printer': {'name': 'Prusa MK3S+', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 185, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 30, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 15, 'useM600': True}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': False}, 'spoolManager': {'enabled': True}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'color': '#dcdde1', 'command': 'G28', 'confirm': False, 'exit': True, 'icon': 'home'}, {'color': '#4bae50', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/webcam', 'confirm': False, 'exit': False, 'icon': 'camera'}, {'color': '#e1b12c', 'command': 'M140 S50; M104 S185', 'confirm': False, 'exit': True, 'icon': 'fire-alt'}, {'color': '#0097e6', 'command': 'M140 S0; M104 S0', 'confirm': False, 'exit': True, 'icon': 'snowflake'}, {'color': '#0097e6', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/sleep', 'confirm': False, 'exit': False, 'icon': 'bed'}, {'color': '#FF0000', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/restart', 'confirm': True, 'exit': False, 'icon': 'power-off'}], 'fileSorting': {'attribute': 'date', 'order': 'dsc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': True, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2022-05-08 18:32:24,575 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2022-05-08 18:32:24,577 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://octopi.local:80/', 'accessToken': '1F3B7A663FB44EDCBDEF767FF98296E8'}, 'printer': {'name': 'Prusa MK3S+', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 185, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 30, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 15, 'useM600': True}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': False}, 'spoolManager': {'enabled': True}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'color': '#dcdde1', 'command': 'G28', 'confirm': False, 'exit': True, 'icon': 'home'}, {'color': '#4bae50', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/webcam', 'confirm': False, 'exit': False, 'icon': 'camera'}, {'color': '#e1b12c', 'command': 'M140 S50; M104 S185', 'confirm': False, 'exit': True, 'icon': 'fire-alt'}, {'color': '#0097e6', 'command': 'M140 S0; M104 S0', 'confirm': False, 'exit': True, 'icon': 'snowflake'}, {'color': '#0097e6', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/sleep', 'confirm': False, 'exit': False, 'icon': 'bed'}, {'color': '#FF0000', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/restart', 'confirm': True, 'exit': False, 'icon': 'power-off'}], 'fileSorting': {'attribute': 'date', 'order': 'dsc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': True, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2022-05-08 18:32:24,975 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 12, 'spoolName': 'Galaxy Silver', 'material': 'PLA', 'colorName': 'lightgrey', 'remainingWeight': 142.4876423385515}' to event-bus 2022-05-08 18:32:25,361 - octoprint.plugins.tracking - INFO - Sent tracking event webui_load, payload: {'browser_name': 'Chrome', 'browser_version': '101.0.4951.54', 'os_name': 'Windows', 'os_version': '10'} 2022-05-08 18:32:42,455 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2022-05-08 18:32:46,531 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 10819, 'printer_state': 'OPERATIONAL'} 2022-05-08 18:34:52,040 - octoprint.server.api.system - INFO - Performing command for core:restart: sudo service octoprint restart 2022-05-08 18:34:52,202 - octoprint.server - INFO - Shutting down... 2022-05-08 18:34:52,208 - octoprint.server.api.system - WARNING - Command for core:restart failed with return code -15: ! STDOUT: ! STDERR: 2022-05-08 18:34:52,292 - octoprint.server - INFO - Calling on_shutdown on plugins 2022-05-08 18:34:52,293 - octoprint.events - INFO - Processing shutdown event, this will be our last event 2022-05-08 18:34:52,300 - octoprint.events - INFO - Event loop shut down 2022-05-08 18:34:52,788 - octoprint.plugins.tracking - INFO - Sent tracking event shutdown, payload: {} 2022-05-08 18:34:52,792 - octoprint.plugins.HeaterTimeout - INFO - Shutting down... 2022-05-08 18:34:52,926 - octoprint.plugins.ws281x_led_status - INFO - WS281x LED Status runner stopped 2022-05-08 18:34:52,927 - octoprint.server - INFO - Goodbye! 2022-05-08 18:34:55,707 - octoprint.startup - INFO - ****************************************************************************** 2022-05-08 18:34:55,711 - octoprint.startup - INFO - Starting OctoPrint 1.7.3 2022-05-08 18:34:55,712 - octoprint.startup - INFO - Starting in SAFE MODE. Third party plugins will be disabled! 2022-05-08 18:34:55,713 - octoprint.startup - INFO - Reason for safe mode: problem during last startup 2022-05-08 18:34:55,713 - octoprint.startup - INFO - ****************************************************************************** 2022-05-08 18:34:56,303 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity changed from offline to online 2022-05-08 18:34:56,434 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: online 2022-05-08 18:34:56,435 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 1.1.1.1:53 is working 2022-05-08 18:34:56,435 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is working 2022-05-08 18:34:57,146 - octoprint.startup - INFO - Blacklist processing done, adding 3 blacklisted plugin versions: roomtemp (any), GcodeEditor (>=0.1.1,<=0.2.8), gcodeleveling (>=0.1.0,<=0.1.1) 2022-05-08 18:34:57,211 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2022-05-08 18:34:58,627 - octoprint.plugin.core - INFO - Plugin Themeify (1.2.2) is disabled. 2022-05-08 18:34:58,852 - octoprint.plugin.core - INFO - Plugin Floating Navbar (0.3.7) is disabled. 2022-05-08 18:34:59,305 - octoprint.plugin.core - INFO - Found 40 plugin(s) providing 18 mixin implementations, 38 hook handlers 2022-05-08 18:34:59,353 - octoprint.server.heartbeat - INFO - Starting server heartbeat, 900.0s interval 2022-05-08 18:34:59,362 - octoprint.server - INFO - Intermediary server started 2022-05-08 18:34:59,392 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/pi/.octoprint/uploads... 2022-05-08 18:35:00,031 - octoprint.filemanager.storage - INFO - ... file metadata for /home/pi/.octoprint/uploads initialized successfully. 2022-05-08 18:35:00,036 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_SHOW (needs: "Need(method='role', value='plugin_action_command_notification_show')") 2022-05-08 18:35:00,037 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_CLEAR (needs: "Need(method='role', value='plugin_action_command_notification_clear')") 2022-05-08 18:35:00,037 - octoprint.server - INFO - Added new permission from plugin action_command_prompt: PLUGIN_ACTION_COMMAND_PROMPT_INTERACT (needs: "Need(method='role', value='plugin_action_command_prompt_interact')") 2022-05-08 18:35:00,038 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_READ (needs: "Need(method='role', value='plugin_announcements_read')") 2022-05-08 18:35:00,038 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_MANAGE (needs: "Need(method='role', value='plugin_announcements_read'), Need(method='role', value='plugin_announcements_manage')") 2022-05-08 18:35:00,039 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_ADMIN (needs: "Need(method='role', value='plugin_appkeys_admin')") 2022-05-08 18:35:00,039 - octoprint.server - INFO - Added new permission from plugin backup: PLUGIN_BACKUP_ACCESS (needs: "Need(method='role', value='plugin_backup_access')") 2022-05-08 18:35:00,039 - octoprint.server - INFO - Added new permission from plugin firmware_check: PLUGIN_FIRMWARE_CHECK_DISPLAY (needs: "Need(method='role', value='plugin_firmware_check_display')") 2022-05-08 18:35:00,040 - octoprint.server - INFO - Added new permission from plugin logging: PLUGIN_LOGGING_MANAGE (needs: "Need(method='role', value='plugin_logging_manage')") 2022-05-08 18:35:00,040 - octoprint.server - INFO - Added new permission from plugin pi_support: PLUGIN_PI_SUPPORT_STATUS (needs: "Need(method='role', value='plugin_pi_support_check')") 2022-05-08 18:35:00,041 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_MANAGE (needs: "Need(method='role', value='plugin_pluginmanager_manage')") 2022-05-08 18:35:00,041 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_INSTALL (needs: "Need(method='role', value='plugin_pluginmanager_install'), Need(method='role', value='plugin_pluginmanager_manage')") 2022-05-08 18:35:00,042 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CHECK (needs: "Need(method='role', value='plugin_softwareupdate_check')") 2022-05-08 18:35:00,043 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_UPDATE (needs: "Need(method='role', value='plugin_softwareupdate_update')") 2022-05-08 18:35:00,044 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CONFIGURE (needs: "Need(method='role', value='plugin_softwareupdate_configure')") 2022-05-08 18:35:01,165 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip 2022-05-08 18:35:02,123 - octoprint.util.pip - INFO - Version of pip is 20.3.3 2022-05-08 18:35:02,125 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-05-08 18:35:02,126 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-05-08 18:35:02,579 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk 2022-05-08 18:35:02,603 - octoprint.plugins.softwareupdate - INFO - Loaded update log from disk 2022-05-08 18:35:02,628 - octoprint.plugin.core - INFO - Initialized 18 plugin implementation(s) 2022-05-08 18:35:02,641 - octoprint.plugin.core - INFO - 40 plugin(s) registered with the system: | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/appkeys | Backup & Restore (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/backup | !Backup Scheduler (0.1.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_backupscheduler | !Camera Settings (0.3.2) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_CameraSettings | Core Wizard (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/corewizard | Discovery (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/discovery | !DisplayLayerProgress Plugin (1.28.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_DisplayLayerProgress | !Draggable Files (1.1.2) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_draggable_files | Error Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/errortracking | Event Manager (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/eventmanager | !Exclude Region (0.3.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_excluderegion | File Check (2021.2.23) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_file_check | Firmware Check (2021.10.11) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_firmware_check | !Floating Navbar (0.3.7) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_floatingnavbar | GCode Viewer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/gcodeviewer | !HeaterTimeout (0.0.4) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_HeaterTimeout | !ipOnConnect (0.2.4) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_ipOnConnect | Logging (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/logging | !Navbar Temperature Plugin (0.14) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_navbartemp | !OctoApp (1.0.10) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_octoapp | !OctoDash Companion (0.0.7) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_octodashcompanion | !OctoEverywhere! (1.6.6) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_octoeverywhere | Pi Support Plugin (2022.3.28) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/pluginmanager | !Preheat Button (0.8.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_preheat | !PrintTimeGenius Plugin (2.2.8) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_PrintTimeGenius | !Simple Emergency Stop (1.0.5) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_simpleemergencystop | !Slicer Thumbnails (1.0.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_prusaslicerthumbnails | Software Update (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/softwareupdate | !SpoolManager Plugin (1.7.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_SpoolManager | !Terminal Messaging (0.1.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_terminalmessaging | !Themeify (1.2.2) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_themeify | !TouchUI (0.3.18) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_touchui | !UI Customizer (0.1.8.9) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_uicustomizer | Virtual Printer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/virtual_printer | !WS281x LED Status (0.8.1) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_ws281x_led_status Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2022-05-08 18:35:02,679 - octoprint.environment - INFO - Detected environment is Python 3.7.3 under Linux (linux). Details: | hardware: | cores: 4 | freq: 1400.0 | ram: 914010112 | os: | bits: 32 | id: linux | platform: linux | plugins: | pi_support: | model: Raspberry Pi 3 Model B Plus Rev 1.3 | octopi_version: 0.18.0 | throttle_state: '0x0' | python: | pip: 20.3.3 | version: 3.7.3 | virtualenv: /home/pi/oprint 2022-05-08 18:35:02,697 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/webassets... 2022-05-08 18:35:02,729 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-cache... 2022-05-08 18:35:03,527 - octoprint.server - INFO - Shutting down intermediary server... 2022-05-08 18:35:03,699 - octoprint.server - INFO - Intermediary server shut down 2022-05-08 18:35:03,702 - octoprint.events - INFO - Processing startup event, this is our first event 2022-05-08 18:35:03,702 - octoprint.events - INFO - Adding 2 events to queue that were held back before startup event 2022-05-08 18:35:03,703 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue... 2022-05-08 18:35:03,717 - octoprint.server - INFO - Autoconnect on startup is configured, trying to connect to the printer... 2022-05-08 18:35:03,754 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json 2022-05-08 18:35:03,857 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2022-05-08 18:35:04,271 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue 2022-05-08 18:35:04,615 - octoprint.plugins.tracking - INFO - Sent tracking event system_unthrottled, payload: {'throttled_now': False, 'throttled_past': False, 'throttled_mask': 0, 'throttled_voltage_now': False, 'throttled_voltage_past': False, 'throttled_overheat_now': False, 'throttled_overheat_past': False} 2022-05-08 18:35:04,649 - octoprint.server - INFO - Trying to connect to configured serial port None 2022-05-08 18:35:04,852 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2022-05-08 18:35:04,882 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder... 2022-05-08 18:35:04,917 - octoprint.server.util.watchdog - INFO - ... initial scan done. 2022-05-08 18:35:05,670 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 7 port/baudrate candidates: /dev/ttyACM1@115200, /dev/ttyACM1@250000, /dev/ttyACM1@230400, /dev/ttyACM1@57600, /dev/ttyACM1@38400, /dev/ttyACM1@19200, /dev/ttyACM1@9600 2022-05-08 18:35:05,671 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyACM1, baudrate 115200 2022-05-08 18:35:05,672 - octoprint.util.comm - INFO - Connecting to port /dev/ttyACM1, baudrate 115200 2022-05-08 18:35:05,809 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-05-08 18:35:05,824 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-05-08 18:35:06,017 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on octopi._http._tcp.local.' for _http._tcp.local. 2022-05-08 18:35:06,889 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Operational" 2022-05-08 18:35:06,929 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-05-08 18:35:06,931 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2022-05-08 18:35:06,935 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on octopi._octoprint._tcp.local.' for _octoprint._tcp.local. 2022-05-08 18:35:06,963 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance on octopi for SSDP 2022-05-08 18:35:07,012 - octoprint.server - INFO - Listening on http://127.0.0.1:5000 2022-05-08 18:35:07,074 - octoprint.server.util.flask - INFO - Passively logging in user ssenrah from ::ffff:192.168.0.158 2022-05-08 18:35:07,075 - octoprint.access.users - INFO - Logged in user: ssenrah 2022-05-08 18:35:07,111 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip 2022-05-08 18:35:07,116 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-05-08 18:35:07,171 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2022-05-08 18:35:07,177 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-05-08 18:35:07,202 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.0.125 2022-05-08 18:35:08,259 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip 2022-05-08 18:35:08,274 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-05-08 18:35:08,283 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-05-08 18:35:08,434 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 53.0GB. That is considered sufficient for updating. 2022-05-08 18:35:08,593 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk 2022-05-08 18:35:09,148 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.0.158 2022-05-08 18:35:09,237 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 10, 'printer_state': 'OPERATIONAL'} 2022-05-08 18:35:09,450 - octoprint.server.util.sockjs - INFO - User ssenrah logged in on the socket from client ::ffff:192.168.0.158 2022-05-08 18:35:09,500 - octoprint.server.util.flask - INFO - Passively logging in user ssenrah from ::ffff:192.168.0.125 2022-05-08 18:35:09,500 - octoprint.access.users - INFO - Logged in user: ssenrah 2022-05-08 18:35:09,603 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'http://192.168.0.158/', 'path': '/', 'query_string': 'l10n=en'} 2022-05-08 18:35:09,907 - octoprint.plugins.tracking - INFO - Sent tracking event pong, payload: {'version': '1.7.3', 'os': 'linux', 'bits': 32, 'python': '3.7.3', 'pip': '20.3.3', 'cores': 4, 'freq': 1400.0, 'ram': 914010112, 'pi_model': 'Raspberry Pi 3 Model B Plus Rev 1.3', 'octopi_version': '0.18.0', 'plugins': ''} 2022-05-08 18:35:10,570 - octoprint.plugins.tracking - INFO - Sent tracking event startup, payload: {'version': '1.7.3', 'os': 'linux', 'bits': 32, 'python': '3.7.3', 'pip': '20.3.3', 'cores': 4, 'freq': 1400.0, 'ram': 914010112, 'pi_model': 'Raspberry Pi 3 Model B Plus Rev 1.3', 'octopi_version': '0.18.0'} 2022-05-08 18:35:10,956 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2022-05-08 18:35:11,792 - octoprint.util.comm - INFO - Printer reports firmware name "Prusa-Firmware 3.10.0 based on Marlin" 2022-05-08 18:35:11,792 - octoprint.util.comm - INFO - Detected Prusa firmware, enabling relevant features for issue free communication 2022-05-08 18:35:11,813 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting 2022-05-08 18:35:12,307 - octoprint.server.util.sockjs - INFO - User ssenrah logged in on the socket from client ::ffff:192.168.0.125 2022-05-08 18:35:12,343 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {'firmware_name': 'Prusa-Firmware 3.10.0 based on Marlin', 'printer_port': None, 'printer_baudrate': 0} 2022-05-08 18:35:12,623 - octoprint.server.util.flask - INFO - Passively logging in user ssenrah from ::ffff:192.168.0.125 2022-05-08 18:35:12,624 - octoprint.access.users - INFO - Logged in user: ssenrah 2022-05-08 18:35:29,185 - octoprint.server.preemptive_cache - INFO - ... done in 19.58s 2022-05-08 18:35:29,348 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.0.125 2022-05-08 18:35:29,668 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.0.125 2022-05-08 18:35:29,772 - octoprint.server.util.flask - INFO - Passively logging in user ssenrah from ::ffff:192.168.0.125 2022-05-08 18:35:29,772 - octoprint.access.users - INFO - Logged in user: ssenrah 2022-05-08 18:35:30,354 - octoprint.server.util.sockjs - INFO - User ssenrah logged in on the socket from client ::ffff:192.168.0.125 2022-05-08 18:35:32,173 - octoprint.plugins.tracking - INFO - Sent tracking event webui_load, payload: {'browser_name': 'Chrome', 'browser_version': '101.0.4951.54', 'os_name': 'Windows', 'os_version': '10'} 2022-05-08 18:49:59,355 - octoprint.server.heartbeat - INFO - Server heartbeat <3 2022-05-08 18:50:09,130 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 910, 'printer_state': 'OPERATIONAL'} 2022-05-08 18:56:44,791 - octoprint.plugins.tracking - INFO - Sent tracking event disable_plugin, payload: {'plugin': 'DisplayLayerProgress', 'plugin_version': '1.28.0'} 2022-05-08 18:56:51,613 - octoprint.server.api.system - INFO - Performing command for core:restart: sudo service octoprint restart 2022-05-08 18:56:51,741 - octoprint.server - INFO - Shutting down... 2022-05-08 18:56:51,750 - octoprint.server.api.system - WARNING - Command for core:restart failed with return code -15: ! STDOUT: ! STDERR: 2022-05-08 18:56:52,560 - octoprint.server - INFO - Calling on_shutdown on plugins 2022-05-08 18:56:52,562 - octoprint.events - INFO - Processing shutdown event, this will be our last event 2022-05-08 18:56:52,569 - octoprint.events - INFO - Event loop shut down 2022-05-08 18:56:53,130 - octoprint.plugins.tracking - INFO - Sent tracking event shutdown, payload: {} 2022-05-08 18:56:53,132 - octoprint.server - INFO - Goodbye! 2022-05-08 18:56:55,650 - octoprint.startup - INFO - ****************************************************************************** 2022-05-08 18:56:55,655 - octoprint.startup - INFO - Starting OctoPrint 1.7.3 2022-05-08 18:56:55,656 - octoprint.startup - INFO - ****************************************************************************** 2022-05-08 18:56:56,258 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity changed from offline to online 2022-05-08 18:56:56,394 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: online 2022-05-08 18:56:56,394 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 1.1.1.1:53 is working 2022-05-08 18:56:56,394 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is working 2022-05-08 18:56:57,016 - octoprint.startup - INFO - Blacklist processing done, adding 3 blacklisted plugin versions: roomtemp (any), GcodeEditor (>=0.1.1,<=0.2.8), gcodeleveling (>=0.1.0,<=0.1.1) 2022-05-08 18:56:57,080 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2022-05-08 18:56:58,537 - octoprint.plugin.core - INFO - Plugin Themeify (1.2.2) is disabled. 2022-05-08 18:56:58,968 - octoprint.plugin.core - INFO - Plugin Floating Navbar (0.3.7) is disabled. 2022-05-08 18:56:59,847 - octoprint.plugin.core - INFO - Plugin DisplayLayerProgress Plugin (1.28.0) is disabled. 2022-05-08 18:56:59,892 - octoprint.plugins.ws281x_led_status - INFO - Detected running on a Raspberry Pi 3 2022-05-08 18:57:00,105 - octoprint.startup - INFO - Added settings overlay from plugin octodashcompanion 2022-05-08 18:57:00,118 - octoprint.plugin.core - INFO - Found 40 plugin(s) providing 37 mixin implementations, 85 hook handlers 2022-05-08 18:57:00,376 - octoprint.server.heartbeat - INFO - Starting server heartbeat, 900.0s interval 2022-05-08 18:57:00,387 - octoprint.server - INFO - Intermediary server started 2022-05-08 18:57:00,416 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/pi/.octoprint/uploads... 2022-05-08 18:57:01,116 - octoprint.filemanager.storage - INFO - ... file metadata for /home/pi/.octoprint/uploads initialized successfully. 2022-05-08 18:57:01,121 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_SHOW (needs: "Need(method='role', value='plugin_action_command_notification_show')") 2022-05-08 18:57:01,122 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_CLEAR (needs: "Need(method='role', value='plugin_action_command_notification_clear')") 2022-05-08 18:57:01,123 - octoprint.server - INFO - Added new permission from plugin action_command_prompt: PLUGIN_ACTION_COMMAND_PROMPT_INTERACT (needs: "Need(method='role', value='plugin_action_command_prompt_interact')") 2022-05-08 18:57:01,123 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_READ (needs: "Need(method='role', value='plugin_announcements_read')") 2022-05-08 18:57:01,123 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_MANAGE (needs: "Need(method='role', value='plugin_announcements_read'), Need(method='role', value='plugin_announcements_manage')") 2022-05-08 18:57:01,124 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_ADMIN (needs: "Need(method='role', value='plugin_appkeys_admin')") 2022-05-08 18:57:01,124 - octoprint.server - INFO - Added new permission from plugin backup: PLUGIN_BACKUP_ACCESS (needs: "Need(method='role', value='plugin_backup_access')") 2022-05-08 18:57:01,125 - octoprint.server - INFO - Added new permission from plugin firmware_check: PLUGIN_FIRMWARE_CHECK_DISPLAY (needs: "Need(method='role', value='plugin_firmware_check_display')") 2022-05-08 18:57:01,125 - octoprint.server - INFO - Added new permission from plugin logging: PLUGIN_LOGGING_MANAGE (needs: "Need(method='role', value='plugin_logging_manage')") 2022-05-08 18:57:01,126 - octoprint.server - INFO - Added new permission from plugin octoapp: PLUGIN_OCTOAPP_RECEIVE_NOTIFICATIONS (needs: "Need(method='role', value='plugin_octoapp_admin')") 2022-05-08 18:57:01,126 - octoprint.server - INFO - Added new permission from plugin octoapp: PLUGIN_OCTOAPP_GET_DATA (needs: "Need(method='role', value='plugin_octoapp_admin')") 2022-05-08 18:57:01,127 - octoprint.server - INFO - Added new permission from plugin octodashcompanion: PLUGIN_OCTODASHCOMPANION_MANAGEBACKUPS (needs: "Need(method='role', value='plugin_octodashcompanion_admin')") 2022-05-08 18:57:01,130 - octoprint.server - INFO - Added new permission from plugin pi_support: PLUGIN_PI_SUPPORT_STATUS (needs: "Need(method='role', value='plugin_pi_support_check')") 2022-05-08 18:57:01,131 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_MANAGE (needs: "Need(method='role', value='plugin_pluginmanager_manage')") 2022-05-08 18:57:01,133 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_INSTALL (needs: "Need(method='role', value='plugin_pluginmanager_manage'), Need(method='role', value='plugin_pluginmanager_install')") 2022-05-08 18:57:01,135 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CHECK (needs: "Need(method='role', value='plugin_softwareupdate_check')") 2022-05-08 18:57:01,136 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_UPDATE (needs: "Need(method='role', value='plugin_softwareupdate_update')") 2022-05-08 18:57:01,137 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CONFIGURE (needs: "Need(method='role', value='plugin_softwareupdate_configure')") 2022-05-08 18:57:01,157 - octoprint.printer.standard - INFO - Using print time estimator provided by PrintTimeGenius 2022-05-08 18:57:02,250 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip 2022-05-08 18:57:03,209 - octoprint.util.pip - INFO - Version of pip is 20.3.3 2022-05-08 18:57:03,211 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-05-08 18:57:03,212 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-05-08 18:57:03,807 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk 2022-05-08 18:57:03,831 - octoprint.plugins.softwareupdate - INFO - Loaded update log from disk 2022-05-08 18:57:03,961 - octoprint.plugins.SpoolManager - INFO - Start initializing 2022-05-08 18:57:03,965 - octoprint.plugins.SpoolManager.DatabaseManager - INFO - Init DatabaseManager 2022-05-08 18:57:03,967 - octoprint.plugins.SpoolManager.DatabaseManager - INFO - Databasefile '/home/pi/.octoprint/data/SpoolManager/spoolmanager.db' exists: True 2022-05-08 18:57:03,974 - octoprint.plugins.SpoolManager.DatabaseManager - INFO - Check if database-scheme upgrade needed... 2022-05-08 18:57:03,975 - octoprint.plugins.SpoolManager.DatabaseManager - INFO - Current databasescheme: 7 2022-05-08 18:57:03,976 - octoprint.plugins.SpoolManager.DatabaseManager - INFO - ...Database-scheme upgraded not needed. 2022-05-08 18:57:03,976 - octoprint.plugins.SpoolManager.DatabaseManager - INFO - Database created-check done 2022-05-08 18:57:03,979 - octoprint.plugins.SpoolManager - INFO - Done initializing 2022-05-08 18:57:04,056 - octoprint.plugins.excluderegion - INFO - Logging mode set to 'octoprint' 2022-05-08 18:57:04,057 - octoprint.plugins.excluderegion - INFO - Setting update detected: g90InfluencesExtruder=False, clearRegionsAfterPrintFinishes=True, mayShrinkRegionsWhilePrinting=False, loggingMode=octoprint, enteringExcludedRegionGcode=None, exitingExcludedRegionGcode=None, extendedExcludeGcodes={'G4': {"gcode": "G4", "mode": "exclude", "description": "Ignore all dwell commands in an excluded area to reduce delays while excluding", "type": "ExcludedGcode"}, 'M117': {"gcode": "M117", "mode": "last", "description": "Suppress display messages while excluding and output the last message encountered when exiting the excluded area", "type": "ExcludedGcode"}, 'M204': {"gcode": "M204", "mode": "merge", "description": "Record default acceleration changes while excluding and apply the most recent values in a single command after exiting the excluded area", "type": "ExcludedGcode"}, 'M205': {"gcode": "M205", "mode": "merge", "description": "Record advanced setting changes while excluding and apply the most recent values in a single command after exiting the excluded area", "type": "ExcludedGcode"}, 'M73': {"gcode": "M73", "mode": "merge", "description": "Suppress progress updates while excluding and output the most recent progress values encountered when exiting the excluded area", "type": "ExcludedGcode"}}, atCommandActions={'ExcludeRegion': [{"command": "ExcludeRegion", "parameterPattern": "^\\s*(enable|on)(\\s|$)", "action": "enable_exclusion", "description": "Default action to enable exclusion", "type": "AtCommandAction"}, {"command": "ExcludeRegion", "parameterPattern": "^\\s*(disable|off)(\\s|$)", "action": "disable_exclusion", "description": "Default action to disable exclusion", "type": "AtCommandAction"}]} 2022-05-08 18:57:04,097 - octoprint.plugin.core - INFO - Initialized 37 plugin implementation(s) 2022-05-08 18:57:04,410 - octoprint.plugin.core - INFO - 40 plugin(s) registered with the system: | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/appkeys | Backup & Restore (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/backup | Backup Scheduler (0.1.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_backupscheduler | Camera Settings (0.3.2) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_CameraSettings | Core Wizard (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/corewizard | Discovery (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/discovery | !DisplayLayerProgress Plugin (1.28.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_DisplayLayerProgress | Draggable Files (1.1.2) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_draggable_files | Error Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/errortracking | Event Manager (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/eventmanager | Exclude Region (0.3.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_excluderegion | File Check (2021.2.23) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_file_check | Firmware Check (2021.10.11) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_firmware_check | !Floating Navbar (0.3.7) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_floatingnavbar | GCode Viewer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/gcodeviewer | HeaterTimeout (0.0.4) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_HeaterTimeout | ipOnConnect (0.2.4) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_ipOnConnect | Logging (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/logging | Navbar Temperature Plugin (0.14) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_navbartemp | OctoApp (1.0.10) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_octoapp | OctoDash Companion (0.0.7) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_octodashcompanion | OctoEverywhere! (1.6.6) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_octoeverywhere | Pi Support Plugin (2022.3.28) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/pluginmanager | Preheat Button (0.8.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_preheat | PrintTimeGenius Plugin (2.2.8) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_PrintTimeGenius | Simple Emergency Stop (1.0.5) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_simpleemergencystop | Slicer Thumbnails (1.0.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_prusaslicerthumbnails | Software Update (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/softwareupdate | SpoolManager Plugin (1.7.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_SpoolManager | Terminal Messaging (0.1.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_terminalmessaging | !Themeify (1.2.2) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_themeify | TouchUI (0.3.18) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_touchui | UI Customizer (0.1.8.9) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_uicustomizer | Virtual Printer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/virtual_printer | WS281x LED Status (0.8.1) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_ws281x_led_status Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2022-05-08 18:57:04,455 - octoprint.environment - INFO - Detected environment is Python 3.7.3 under Linux (linux). Details: | hardware: | cores: 4 | freq: 1400.0 | ram: 914010112 | os: | bits: 32 | id: linux | platform: linux | plugins: | pi_support: | model: Raspberry Pi 3 Model B Plus Rev 1.3 | octopi_version: 0.18.0 | throttle_state: '0x0' | python: | pip: 20.3.3 | version: 3.7.3 | virtualenv: /home/pi/oprint 2022-05-08 18:57:04,470 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/webassets... 2022-05-08 18:57:04,493 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-cache... 2022-05-08 18:57:04,509 - octoprint.server.util.flask.collect_plugin_assets - WARNING - Plugin simpleemergencystop is referring to non existing css asset css/fontawesome.all.min.css 2022-05-08 18:57:05,691 - octoprint.server - INFO - Shutting down intermediary server... 2022-05-08 18:57:06,124 - octoprint.server - INFO - Intermediary server shut down 2022-05-08 18:57:06,127 - octoprint.events - INFO - Processing startup event, this is our first event 2022-05-08 18:57:06,128 - octoprint.events - INFO - Adding 2 events to queue that were held back before startup event 2022-05-08 18:57:06,128 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue... 2022-05-08 18:57:06,130 - octoprint.server - INFO - Autoconnect on startup is configured, trying to connect to the printer... 2022-05-08 18:57:06,179 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json 2022-05-08 18:57:06,271 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2022-05-08 18:57:06,311 - octoprint.plugins.ipOnConnect - INFO - ipOnConnectPlugin: M117 192.168.0.158 2022-05-08 18:57:06,912 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue 2022-05-08 18:57:06,943 - octoprint.plugins.tracking - INFO - Sent tracking event system_unthrottled, payload: {'throttled_now': False, 'throttled_past': False, 'throttled_mask': 0, 'throttled_voltage_now': False, 'throttled_voltage_past': False, 'throttled_overheat_now': False, 'throttled_overheat_past': False} 2022-05-08 18:57:07,530 - octoprint.server - INFO - Trying to connect to configured serial port None 2022-05-08 18:57:07,900 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2022-05-08 18:57:07,987 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder... 2022-05-08 18:57:08,022 - octoprint.server.util.watchdog - INFO - ... initial scan done. 2022-05-08 18:57:08,906 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 7 port/baudrate candidates: /dev/ttyACM1@115200, /dev/ttyACM1@250000, /dev/ttyACM1@230400, /dev/ttyACM1@57600, /dev/ttyACM1@38400, /dev/ttyACM1@19200, /dev/ttyACM1@9600 2022-05-08 18:57:08,907 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyACM1, baudrate 115200 2022-05-08 18:57:08,908 - octoprint.util.comm - INFO - Connecting to port /dev/ttyACM1, baudrate 115200 2022-05-08 18:57:08,995 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-05-08 18:57:09,016 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-05-08 18:57:09,050 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on octopi._http._tcp.local.' for _http._tcp.local. 2022-05-08 18:57:09,282 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2022-05-08 18:57:09,899 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on octopi._octoprint._tcp.local.' for _octoprint._tcp.local. 2022-05-08 18:57:09,902 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance on octopi for SSDP 2022-05-08 18:57:09,959 - octoprint.plugins.octoeverywhere - INFO - OctoPrint port 5000 2022-05-08 18:57:10,060 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Operational" 2022-05-08 18:57:10,114 - octoprint.plugins.ipOnConnect - INFO - ipOnConnectPlugin: M117 192.168.0.158 2022-05-08 18:57:10,146 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-05-08 18:57:10,876 - octoprint.plugins.octoeverywhere - INFO - OctoPingPong stats loaded from file. 2022-05-08 18:57:10,887 - octoprint.plugins.ws281x_led_status - INFO - Running OS config test (Log mode) 2022-05-08 18:57:10,891 - octoprint.server - INFO - Listening on http://127.0.0.1:5000 2022-05-08 18:57:10,908 - octoprint.plugins.ws281x_led_status - INFO - OS config test complete. Results: | - adduser: True | - spi_enabled: True | - spi_buffer_increase: True | - set_core_freq: True | - set_core_freq_min: True 2022-05-08 18:57:10,981 - octoprint.plugins.octoeverywhere - INFO - IPV4 - starport:165.22.39.243 main:104.21.49.248 2022-05-08 18:57:11,014 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2022-05-08 18:57:11,048 - octoprint.plugins.octoeverywhere - INFO - Failed to resolve host ipv6 name [Errno -2] Name or service not known 2022-05-08 18:57:11,287 - octoprint.server.util.flask - INFO - Passively logging in user ssenrah from ::ffff:192.168.0.158 2022-05-08 18:57:11,295 - octoprint.access.users - INFO - Logged in user: ssenrah 2022-05-08 18:57:11,392 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.0.125 2022-05-08 18:57:12,109 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip 2022-05-08 18:57:12,116 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-05-08 18:57:12,122 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-05-08 18:57:12,196 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 53.0GB. That is considered sufficient for updating. 2022-05-08 18:57:12,585 - octoprint.plugins.HeaterTimeout - INFO - Starting up... 2022-05-08 18:57:12,596 - octoprint.plugins.SpoolManager - INFO - Plugin-State: filamentmanager=missing 2022-05-08 18:57:12,653 - octoprint.plugins.ipOnConnect - INFO - ipOnConnectPlugin: M117 192.168.0.158 2022-05-08 18:57:12,691 - octoprint.plugins.octoapp - INFO - OctoApp started, updating config 2022-05-08 18:57:12,747 - octoprint.plugins.octoeverywhere - INFO - After startup called. Starting worker thread. 2022-05-08 18:57:12,748 - octoprint.plugins.octoeverywhere - INFO - Main thread starting 2022-05-08 18:57:12,780 - octoprint.plugins.uicustomizer - INFO - UI Customizer is initialized. 2022-05-08 18:57:12,957 - octoprint.plugins.ws281x_led_status - INFO - WS281x LED Status runner started 2022-05-08 18:57:13,050 - octoprint.server.util.flask - INFO - Passively logging in user ssenrah from ::ffff:192.168.0.125 2022-05-08 18:57:13,053 - octoprint.access.users - INFO - Logged in user: ssenrah 2022-05-08 18:57:13,209 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 14, 'printer_state': 'OPERATIONAL'} 2022-05-08 18:57:13,727 - octoprint.plugins.octoapp - INFO - OctoApp loaded config: {'maxUpdateIntervalSecs': 60, 'updatePercentModulus': 5, 'highPrecisionRangeStart': 5, 'highPrecisionRangeEnd': 5, 'sendNotificationUrl': 'https://europe-west1-octoapp-4e438.cloudfunctions.net/sendNotification'} 2022-05-08 18:57:13,905 - octoprint.plugins.tracking - INFO - Sent tracking event pong, payload: {'version': '1.7.3', 'os': 'linux', 'bits': 32, 'python': '3.7.3', 'pip': '20.3.3', 'cores': 4, 'freq': 1400.0, 'ram': 914010112, 'pi_model': 'Raspberry Pi 3 Model B Plus Rev 1.3', 'octopi_version': '0.18.0', 'plugins': 'uicustomizer:0.1.8.9,touchui:0.3.18,terminalmessaging:0.1.0,prusaslicerthumbnails:1.0.0,preheat:0.8.0,ws281x_led_status:0.8.1,spoolmanager:1.7.0,simpleemergencystop:1.0.5,printtimegenius:2.2.8,navbartemp:0.14,iponconnect:0.2.4,heatertimeout:0.0.4,excluderegion:0.3.0,draggable_files:1.1.2,camerasettings:0.3.2,octoeverywhere:1.6.6,octodashcompanion:0.0.7,octoapp:1.0.10,backupscheduler:0.1.0'} 2022-05-08 18:57:14,499 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'http://192.168.0.158/', 'path': '/', 'query_string': 'l10n=en'} 2022-05-08 18:57:14,817 - octoprint.plugins.tracking - INFO - Sent tracking event startup, payload: {'version': '1.7.3', 'os': 'linux', 'bits': 32, 'python': '3.7.3', 'pip': '20.3.3', 'cores': 4, 'freq': 1400.0, 'ram': 914010112, 'pi_model': 'Raspberry Pi 3 Model B Plus Rev 1.3', 'octopi_version': '0.18.0'} 2022-05-08 18:57:15,013 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 12, 'spoolName': 'Galaxy Silver', 'material': 'PLA', 'colorName': 'lightgrey', 'remainingWeight': 142.4876423385515}' to event-bus 2022-05-08 18:57:15,134 - octoprint.util.comm - INFO - Printer reports firmware name "Prusa-Firmware 3.10.0 based on Marlin" 2022-05-08 18:57:15,134 - octoprint.util.comm - INFO - Detected Prusa firmware, enabling relevant features for issue free communication 2022-05-08 18:57:15,136 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting 2022-05-08 18:57:15,173 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 12, 'spoolName': 'Galaxy Silver', 'material': 'PLA', 'colorName': 'lightgrey', 'remainingWeight': 142.4876423385515}' to event-bus 2022-05-08 18:57:15,222 - octoprint.plugins.octoeverywhere - INFO - Frontend http port detected as 80, is https? False 2022-05-08 18:57:15,243 - octoprint.plugins.octoeverywhere - INFO - Attempting to talk to OctoEverywhere, server con wss://starport-v1.octoeverywhere.com/octoclientws[1] 2022-05-08 18:57:15,520 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2022-05-08 18:57:15,616 - octoprint.plugins.octoeverywhere - INFO - Connected To OctoEverywhere, server con wss://starport-v1.octoeverywhere.com/octoclientws[1]. Starting handshake... 2022-05-08 18:57:16,219 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {'firmware_name': 'Prusa-Firmware 3.10.0 based on Marlin', 'printer_port': None, 'printer_baudrate': 0} 2022-05-08 18:57:17,573 - octoprint.plugins.octoeverywhere - INFO - Handshake complete, server con wss://starport-v1.octoeverywhere.com/octoclientws[1], successfully connected to OctoEverywhere! 2022-05-08 18:57:18,389 - octoprint.server.util.flask - INFO - Passively logging in user ssenrah from 127.0.0.1 2022-05-08 18:57:18,390 - octoprint.access.users - INFO - Logged in user: ssenrah 2022-05-08 18:57:40,721 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.0.158 2022-05-08 18:57:40,746 - octoprint.server.preemptive_cache - INFO - ... done in 26.25s 2022-05-08 18:57:40,843 - octoprint.server.util.sockjs - INFO - User ssenrah logged in on the socket from client ::ffff:192.168.0.158 2022-05-08 18:57:40,863 - octoprint.plugins.octoeverywhere - INFO - Slipstream Cached [request:27.977, compression:0.122] [827624->123439 14.915%] / 2022-05-08 18:57:40,884 - octoprint.server.util.sockjs - INFO - User ssenrah logged in on the socket from client ::ffff:192.168.0.125 2022-05-08 18:57:41,727 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2022-05-08 18:57:41,729 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://octopi.local:80/', 'accessToken': '1F3B7A663FB44EDCBDEF767FF98296E8'}, 'printer': {'name': 'Prusa MK3S+', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 185, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 30, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 15, 'useM600': True}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': False}, 'spoolManager': {'enabled': True}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'color': '#dcdde1', 'command': 'G28', 'confirm': False, 'exit': True, 'icon': 'home'}, {'color': '#4bae50', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/webcam', 'confirm': False, 'exit': False, 'icon': 'camera'}, {'color': '#e1b12c', 'command': 'M140 S50; M104 S185', 'confirm': False, 'exit': True, 'icon': 'fire-alt'}, {'color': '#0097e6', 'command': 'M140 S0; M104 S0', 'confirm': False, 'exit': True, 'icon': 'snowflake'}, {'color': '#0097e6', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/sleep', 'confirm': False, 'exit': False, 'icon': 'bed'}, {'color': '#FF0000', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/restart', 'confirm': True, 'exit': False, 'icon': 'power-off'}], 'fileSorting': {'attribute': 'date', 'order': 'dsc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': True, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2022-05-08 18:57:42,878 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2022-05-08 18:57:42,880 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://octopi.local:80/', 'accessToken': '1F3B7A663FB44EDCBDEF767FF98296E8'}, 'printer': {'name': 'Prusa MK3S+', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 185, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 30, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 15, 'useM600': True}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': False}, 'spoolManager': {'enabled': True}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'color': '#dcdde1', 'command': 'G28', 'confirm': False, 'exit': True, 'icon': 'home'}, {'color': '#4bae50', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/webcam', 'confirm': False, 'exit': False, 'icon': 'camera'}, {'color': '#e1b12c', 'command': 'M140 S50; M104 S185', 'confirm': False, 'exit': True, 'icon': 'fire-alt'}, {'color': '#0097e6', 'command': 'M140 S0; M104 S0', 'confirm': False, 'exit': True, 'icon': 'snowflake'}, {'color': '#0097e6', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/sleep', 'confirm': False, 'exit': False, 'icon': 'bed'}, {'color': '#FF0000', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/restart', 'confirm': True, 'exit': False, 'icon': 'power-off'}], 'fileSorting': {'attribute': 'date', 'order': 'dsc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': True, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2022-05-08 18:57:43,512 - octoprint.server.util.flask - INFO - Passively logging in user ssenrah from ::ffff:192.168.0.125 2022-05-08 18:57:43,513 - octoprint.access.users - INFO - Logged in user: ssenrah 2022-05-08 18:57:43,814 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.0.125 2022-05-08 18:57:43,890 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 12, 'spoolName': 'Galaxy Silver', 'material': 'PLA', 'colorName': 'lightgrey', 'remainingWeight': 142.4876423385515}' to event-bus 2022-05-08 18:57:43,906 - octoprint.plugins.octoeverywhere - INFO - Slipstream Cached [request:2.604, compression:0.400] [1681215->439174 26.122%] /static/webassets/packed_libs.js?1fe9f29c 2022-05-08 18:57:43,930 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 12, 'spoolName': 'Galaxy Silver', 'material': 'PLA', 'colorName': 'lightgrey', 'remainingWeight': 142.4876423385515}' to event-bus 2022-05-08 18:57:44,048 - octoprint.plugins.octoeverywhere - INFO - Slipstream Cached [request:0.130, compression:0.010] [61454->10163 16.538%] /static/webassets/packed_client.js?b2d27cf4 2022-05-08 18:57:44,204 - octoprint.plugins.octoeverywhere - INFO - SetFrontendLocalPort API called. Port:80 IsHttps:False URL:http://192.168.0.158/#temp 2022-05-08 18:57:44,407 - octoprint.plugins.octoeverywhere - INFO - Slipstream Cached [request:0.049, compression:0.309] [1799735->357701 19.875%] /static/webassets/packed_plugins.js?f8ef55a7 2022-05-08 18:57:44,810 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 12, 'spoolName': 'Galaxy Silver', 'material': 'PLA', 'colorName': 'lightgrey', 'remainingWeight': 142.4876423385515}' to event-bus 2022-05-08 18:57:44,939 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.0.125 2022-05-08 18:57:44,966 - octoprint.plugins.octoeverywhere - INFO - Slipstream Cached [request:0.450, compression:0.108] [513423->118892 23.157%] /static/webassets/packed_core.js?05a5d975 2022-05-08 18:57:45,080 - octoprint.server.util.flask - INFO - Passively logging in user ssenrah from ::ffff:192.168.0.125 2022-05-08 18:57:45,081 - octoprint.access.users - INFO - Logged in user: ssenrah 2022-05-08 18:57:45,101 - octoprint.plugins.octoeverywhere - INFO - Slipstream Cached [request:0.095, compression:0.039] [224449->40084 17.859%] /static/webassets/packed_libs.css?e7ff56b9 2022-05-08 18:57:45,146 - octoprint.plugins.octoeverywhere - INFO - Slipstream Cached [request:0.020, compression:0.024] [141963->24251 17.083%] /static/webassets/packed_plugins.css?098a416d 2022-05-08 18:57:45,803 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2022-05-08 18:57:45,806 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://octopi.local:80/', 'accessToken': '1F3B7A663FB44EDCBDEF767FF98296E8'}, 'printer': {'name': 'Prusa MK3S+', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 185, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 30, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 15, 'useM600': True}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': False}, 'spoolManager': {'enabled': True}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'color': '#dcdde1', 'command': 'G28', 'confirm': False, 'exit': True, 'icon': 'home'}, {'color': '#4bae50', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/webcam', 'confirm': False, 'exit': False, 'icon': 'camera'}, {'color': '#e1b12c', 'command': 'M140 S50; M104 S185', 'confirm': False, 'exit': True, 'icon': 'fire-alt'}, {'color': '#0097e6', 'command': 'M140 S0; M104 S0', 'confirm': False, 'exit': True, 'icon': 'snowflake'}, {'color': '#0097e6', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/sleep', 'confirm': False, 'exit': False, 'icon': 'bed'}, {'color': '#FF0000', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/restart', 'confirm': True, 'exit': False, 'icon': 'power-off'}], 'fileSorting': {'attribute': 'date', 'order': 'dsc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': True, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2022-05-08 18:57:46,934 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2022-05-08 18:57:46,936 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://octopi.local:80/', 'accessToken': '1F3B7A663FB44EDCBDEF767FF98296E8'}, 'printer': {'name': 'Prusa MK3S+', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 185, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 30, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 15, 'useM600': True}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': False}, 'spoolManager': {'enabled': True}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'color': '#dcdde1', 'command': 'G28', 'confirm': False, 'exit': True, 'icon': 'home'}, {'color': '#4bae50', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/webcam', 'confirm': False, 'exit': False, 'icon': 'camera'}, {'color': '#e1b12c', 'command': 'M140 S50; M104 S185', 'confirm': False, 'exit': True, 'icon': 'fire-alt'}, {'color': '#0097e6', 'command': 'M140 S0; M104 S0', 'confirm': False, 'exit': True, 'icon': 'snowflake'}, {'color': '#0097e6', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/sleep', 'confirm': False, 'exit': False, 'icon': 'bed'}, {'color': '#FF0000', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/restart', 'confirm': True, 'exit': False, 'icon': 'power-off'}], 'fileSorting': {'attribute': 'date', 'order': 'dsc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': True, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2022-05-08 18:57:47,165 - octoprint.plugins.octoeverywhere - INFO - Slipstream Cached [request:2.009, compression:0.010] [103339->12745 12.333%] /static/webassets/packed_core.css?24f52163 2022-05-08 18:57:47,200 - octoprint.plugins.octoeverywhere - INFO - Slipstream Cached [request:0.025, compression:0.010] [78460->78491 100.040%] /static/vendor/font-awesome-5.15.1/webfonts/fa-brands-400.woff2?v=5.15.1 2022-05-08 18:57:47,236 - octoprint.plugins.octoeverywhere - INFO - Slipstream Cached [request:0.025, compression:0.010] [78460->78491 100.040%] /static/vendor/font-awesome-5.15.1/webfonts/fa-brands-400.woff2?v=5.15.1 2022-05-08 18:57:47,262 - octoprint.plugins.octoeverywhere - INFO - Slipstream Cached [request:0.024, compression:0.001] [13548->13559 100.081%] /static/vendor/font-awesome-5.15.1/webfonts/fa-regular-400.woff2?v=5.15.1 2022-05-08 18:57:47,288 - octoprint.plugins.octoeverywhere - INFO - Slipstream Cached [request:0.024, compression:0.001] [13548->13559 100.081%] /static/vendor/font-awesome-5.15.1/webfonts/fa-regular-400.woff2?v=5.15.1 2022-05-08 18:57:47,326 - octoprint.plugins.octoeverywhere - INFO - Slipstream Cached [request:0.026, compression:0.011] [80300->80263 99.954%] /static/vendor/font-awesome-5.15.1/webfonts/fa-solid-900.woff2?v=5.15.1 2022-05-08 18:57:47,363 - octoprint.plugins.octoeverywhere - INFO - Slipstream Cached [request:0.025, compression:0.011] [80300->80263 99.954%] /static/vendor/font-awesome-5.15.1/webfonts/fa-solid-900.woff2?v=5.15.1 2022-05-08 18:57:47,393 - octoprint.plugins.octoeverywhere - INFO - Slipstream Cached [request:0.024, compression:0.006] [43572->43565 99.984%] /static/vendor/font-awesome-3.2.1/fonts/fontawesome-webfont.woff?v=3.2.1 2022-05-08 18:57:47,394 - octoprint.plugins.octoeverywhere - INFO - Slipstream took 34.629958629608154 to fully update the cache 2022-05-08 18:57:47,610 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 12, 'spoolName': 'Galaxy Silver', 'material': 'PLA', 'colorName': 'lightgrey', 'remainingWeight': 142.4876423385515}' to event-bus 2022-05-08 18:57:47,696 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 12, 'spoolName': 'Galaxy Silver', 'material': 'PLA', 'colorName': 'lightgrey', 'remainingWeight': 142.4876423385515}' to event-bus 2022-05-08 18:57:47,769 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 12, 'spoolName': 'Galaxy Silver', 'material': 'PLA', 'colorName': 'lightgrey', 'remainingWeight': 142.4876423385515}' to event-bus 2022-05-08 18:57:47,850 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 12, 'spoolName': 'Galaxy Silver', 'material': 'PLA', 'colorName': 'lightgrey', 'remainingWeight': 142.4876423385515}' to event-bus 2022-05-08 18:57:47,936 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 12, 'spoolName': 'Galaxy Silver', 'material': 'PLA', 'colorName': 'lightgrey', 'remainingWeight': 142.4876423385515}' to event-bus 2022-05-08 18:57:47,966 - octoprint.server.util.sockjs - INFO - User ssenrah logged in on the socket from client ::ffff:192.168.0.125 2022-05-08 18:57:48,125 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 12, 'spoolName': 'Galaxy Silver', 'material': 'PLA', 'colorName': 'lightgrey', 'remainingWeight': 142.4876423385515}' to event-bus 2022-05-08 18:57:48,181 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 12, 'spoolName': 'Galaxy Silver', 'material': 'PLA', 'colorName': 'lightgrey', 'remainingWeight': 142.4876423385515}' to event-bus 2022-05-08 18:57:49,645 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 12, 'spoolName': 'Galaxy Silver', 'material': 'PLA', 'colorName': 'lightgrey', 'remainingWeight': 142.4876423385515}' to event-bus 2022-05-08 18:57:50,410 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2022-05-08 18:57:50,412 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://octopi.local:80/', 'accessToken': '1F3B7A663FB44EDCBDEF767FF98296E8'}, 'printer': {'name': 'Prusa MK3S+', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 185, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 30, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 15, 'useM600': True}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': False}, 'spoolManager': {'enabled': True}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'color': '#dcdde1', 'command': 'G28', 'confirm': False, 'exit': True, 'icon': 'home'}, {'color': '#4bae50', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/webcam', 'confirm': False, 'exit': False, 'icon': 'camera'}, {'color': '#e1b12c', 'command': 'M140 S50; M104 S185', 'confirm': False, 'exit': True, 'icon': 'fire-alt'}, {'color': '#0097e6', 'command': 'M140 S0; M104 S0', 'confirm': False, 'exit': True, 'icon': 'snowflake'}, {'color': '#0097e6', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/sleep', 'confirm': False, 'exit': False, 'icon': 'bed'}, {'color': '#FF0000', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/restart', 'confirm': True, 'exit': False, 'icon': 'power-off'}], 'fileSorting': {'attribute': 'date', 'order': 'dsc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': True, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2022-05-08 18:57:51,538 - octoprint.plugins.octodashcompanion - INFO - attempting open of /home/pi/.config/octodash/config.json. 2022-05-08 18:57:51,540 - octoprint.plugins.octodashcompanion - INFO - loaded data from /home/pi/.config/octodash/config.json: {'config': {'octoprint': {'url': 'http://octopi.local:80/', 'accessToken': '1F3B7A663FB44EDCBDEF767FF98296E8'}, 'printer': {'name': 'Prusa MK3S+', 'xySpeed': 150, 'zSpeed': 5, 'disableExtruderGCode': 'M18 E', 'zBabystepGCode': 'M290 Z', 'defaultTemperatureFanSpeed': {'hotend': 185, 'heatbed': 60, 'fan': 100}}, 'filament': {'thickness': 1.75, 'density': 1.25, 'feedLength': 30, 'feedSpeed': 20, 'feedSpeedSlow': 3, 'purgeDistance': 15, 'useM600': True}, 'plugins': {'displayLayerProgress': {'enabled': True}, 'enclosure': {'enabled': False, 'ambientSensorID': None, 'filament1SensorID': None, 'filament2SensorID': None}, 'filamentManager': {'enabled': False}, 'spoolManager': {'enabled': True}, 'preheatButton': {'enabled': True}, 'printTimeGenius': {'enabled': True}, 'psuControl': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'ophom': {'enabled': False, 'turnOnPSUWhenExitingSleep': False}, 'tpLinkSmartPlug': {'enabled': False, 'smartPlugIP': '127.0.0.1'}, 'tasmota': {'enabled': False, 'ip': '127.0.0.1', 'index': None}, 'tasmotaMqtt': {'enabled': False, 'topic': 'topic', 'relayNumber': None}}, 'octodash': {'customActions': [{'color': '#dcdde1', 'command': 'G28', 'confirm': False, 'exit': True, 'icon': 'home'}, {'color': '#4bae50', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/webcam', 'confirm': False, 'exit': False, 'icon': 'camera'}, {'color': '#e1b12c', 'command': 'M140 S50; M104 S185', 'confirm': False, 'exit': True, 'icon': 'fire-alt'}, {'color': '#0097e6', 'command': 'M140 S0; M104 S0', 'confirm': False, 'exit': True, 'icon': 'snowflake'}, {'color': '#0097e6', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/sleep', 'confirm': False, 'exit': False, 'icon': 'bed'}, {'color': '#FF0000', 'command': '[!WEB]http://octopi.local:80/plugin/octodashcompanion/restart', 'confirm': True, 'exit': False, 'icon': 'power-off'}], 'fileSorting': {'attribute': 'date', 'order': 'dsc'}, 'invertAxisControl': {'x': False, 'y': False, 'z': False}, 'pollingInterval': 2000, 'touchscreen': True, 'turnScreenOffWhileSleeping': True, 'turnOnPrinterWhenExitingSleep': False, 'preferPreviewWhilePrinting': False, 'previewProgressCircle': False, 'screenSleepCommand': 'xset dpms force standby', 'screenWakeupCommand': 'xset s off && xset -dpms && xset s noblank', 'showExtruderControl': True, 'showNotificationCenterIcon': True}}} 2022-05-08 18:57:51,913 - octoprint.plugins.SpoolManager - INFO - Send Event 'plugin_spoolmanager_spool_selected' with payload '{'toolId': 0, 'databaseId': 12, 'spoolName': 'Galaxy Silver', 'material': 'PLA', 'colorName': 'lightgrey', 'remainingWeight': 142.4876423385515}' to event-bus 2022-05-08 18:57:52,293 - octoprint.plugins.tracking - INFO - Sent tracking event webui_load, payload: {'browser_name': 'Chrome', 'browser_version': '101.0.4951.54', 'os_name': 'Windows', 'os_version': '10'} 2022-05-08 18:58:00,107 - octoprint.server.api.system - INFO - Performing command for core:restart: sudo service octoprint restart 2022-05-08 18:58:00,258 - octoprint.server - INFO - Shutting down... 2022-05-08 18:58:00,265 - octoprint.server.api.system - WARNING - Command for core:restart failed with return code -15: ! STDOUT: ! STDERR: 2022-05-08 18:58:00,564 - octoprint.server - INFO - Calling on_shutdown on plugins 2022-05-08 18:58:00,565 - octoprint.events - INFO - Processing shutdown event, this will be our last event 2022-05-08 18:58:00,576 - octoprint.events - INFO - Event loop shut down 2022-05-08 18:58:01,067 - octoprint.plugins.tracking - INFO - Sent tracking event shutdown, payload: {} 2022-05-08 18:58:01,071 - octoprint.plugins.HeaterTimeout - INFO - Shutting down... 2022-05-08 18:58:01,207 - octoprint.plugins.ws281x_led_status - INFO - WS281x LED Status runner stopped 2022-05-08 18:58:01,208 - octoprint.server - INFO - Goodbye! 2022-05-08 18:58:03,880 - octoprint.startup - INFO - ****************************************************************************** 2022-05-08 18:58:03,884 - octoprint.startup - INFO - Starting OctoPrint 1.7.3 2022-05-08 18:58:03,885 - octoprint.startup - INFO - Starting in SAFE MODE. Third party plugins will be disabled! 2022-05-08 18:58:03,886 - octoprint.startup - INFO - Reason for safe mode: problem during last startup 2022-05-08 18:58:03,887 - octoprint.startup - INFO - ****************************************************************************** 2022-05-08 18:58:04,489 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity changed from offline to online 2022-05-08 18:58:04,659 - octoprint.util.connectivity.connectivity_checker - INFO - Connectivity state is currently: online 2022-05-08 18:58:04,660 - octoprint.util.connectivity.connectivity_checker - INFO - Connecting to 1.1.1.1:53 is working 2022-05-08 18:58:04,660 - octoprint.util.connectivity.connectivity_checker - INFO - Resolving octoprint.org is working 2022-05-08 18:58:04,668 - octoprint.startup - INFO - Blacklist processing done, adding 3 blacklisted plugin versions: roomtemp (any), GcodeEditor (>=0.1.1,<=0.2.8), gcodeleveling (>=0.1.0,<=0.1.1) 2022-05-08 18:58:04,737 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2022-05-08 18:58:06,159 - octoprint.plugin.core - INFO - Plugin Themeify (1.2.2) is disabled. 2022-05-08 18:58:06,383 - octoprint.plugin.core - INFO - Plugin Floating Navbar (0.3.7) is disabled. 2022-05-08 18:58:06,707 - octoprint.plugin.core - INFO - Plugin DisplayLayerProgress Plugin (1.28.0) is disabled. 2022-05-08 18:58:06,840 - octoprint.plugin.core - INFO - Found 40 plugin(s) providing 18 mixin implementations, 38 hook handlers 2022-05-08 18:58:06,888 - octoprint.server.heartbeat - INFO - Starting server heartbeat, 900.0s interval 2022-05-08 18:58:06,897 - octoprint.server - INFO - Intermediary server started 2022-05-08 18:58:06,927 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/pi/.octoprint/uploads... 2022-05-08 18:58:07,567 - octoprint.filemanager.storage - INFO - ... file metadata for /home/pi/.octoprint/uploads initialized successfully. 2022-05-08 18:58:07,572 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_SHOW (needs: "Need(method='role', value='plugin_action_command_notification_show')") 2022-05-08 18:58:07,572 - octoprint.server - INFO - Added new permission from plugin action_command_notification: PLUGIN_ACTION_COMMAND_NOTIFICATION_CLEAR (needs: "Need(method='role', value='plugin_action_command_notification_clear')") 2022-05-08 18:58:07,573 - octoprint.server - INFO - Added new permission from plugin action_command_prompt: PLUGIN_ACTION_COMMAND_PROMPT_INTERACT (needs: "Need(method='role', value='plugin_action_command_prompt_interact')") 2022-05-08 18:58:07,573 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_READ (needs: "Need(method='role', value='plugin_announcements_read')") 2022-05-08 18:58:07,574 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_MANAGE (needs: "Need(method='role', value='plugin_announcements_read'), Need(method='role', value='plugin_announcements_manage')") 2022-05-08 18:58:07,574 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_ADMIN (needs: "Need(method='role', value='plugin_appkeys_admin')") 2022-05-08 18:58:07,574 - octoprint.server - INFO - Added new permission from plugin backup: PLUGIN_BACKUP_ACCESS (needs: "Need(method='role', value='plugin_backup_access')") 2022-05-08 18:58:07,575 - octoprint.server - INFO - Added new permission from plugin firmware_check: PLUGIN_FIRMWARE_CHECK_DISPLAY (needs: "Need(method='role', value='plugin_firmware_check_display')") 2022-05-08 18:58:07,575 - octoprint.server - INFO - Added new permission from plugin logging: PLUGIN_LOGGING_MANAGE (needs: "Need(method='role', value='plugin_logging_manage')") 2022-05-08 18:58:07,576 - octoprint.server - INFO - Added new permission from plugin pi_support: PLUGIN_PI_SUPPORT_STATUS (needs: "Need(method='role', value='plugin_pi_support_check')") 2022-05-08 18:58:07,576 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_MANAGE (needs: "Need(method='role', value='plugin_pluginmanager_manage')") 2022-05-08 18:58:07,576 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_INSTALL (needs: "Need(method='role', value='plugin_pluginmanager_manage'), Need(method='role', value='plugin_pluginmanager_install')") 2022-05-08 18:58:07,577 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CHECK (needs: "Need(method='role', value='plugin_softwareupdate_check')") 2022-05-08 18:58:07,578 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_UPDATE (needs: "Need(method='role', value='plugin_softwareupdate_update')") 2022-05-08 18:58:07,580 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CONFIGURE (needs: "Need(method='role', value='plugin_softwareupdate_configure')") 2022-05-08 18:58:08,672 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip 2022-05-08 18:58:09,624 - octoprint.util.pip - INFO - Version of pip is 20.3.3 2022-05-08 18:58:09,626 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-05-08 18:58:09,626 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-05-08 18:58:10,091 - octoprint.plugins.softwareupdate - INFO - Loaded version cache from disk 2022-05-08 18:58:10,119 - octoprint.plugins.softwareupdate - INFO - Loaded update log from disk 2022-05-08 18:58:10,145 - octoprint.plugin.core - INFO - Initialized 18 plugin implementation(s) 2022-05-08 18:58:10,158 - octoprint.plugin.core - INFO - 40 plugin(s) registered with the system: | Action Command Notification Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_notification | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/appkeys | Backup & Restore (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/backup | !Backup Scheduler (0.1.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_backupscheduler | !Camera Settings (0.3.2) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_CameraSettings | Core Wizard (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/corewizard | Discovery (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/discovery | !DisplayLayerProgress Plugin (1.28.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_DisplayLayerProgress | !Draggable Files (1.1.2) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_draggable_files | Error Tracking (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/errortracking | Event Manager (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/eventmanager | !Exclude Region (0.3.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_excluderegion | File Check (2021.2.23) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_file_check | Firmware Check (2021.10.11) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_firmware_check | !Floating Navbar (0.3.7) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_floatingnavbar | GCode Viewer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/gcodeviewer | !HeaterTimeout (0.0.4) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_HeaterTimeout | !ipOnConnect (0.2.4) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_ipOnConnect | Logging (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/logging | !Navbar Temperature Plugin (0.14) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_navbartemp | !OctoApp (1.0.10) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_octoapp | !OctoDash Companion (0.0.7) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_octodashcompanion | !OctoEverywhere! (1.6.6) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_octoeverywhere | Pi Support Plugin (2022.3.28) (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/pluginmanager | !Preheat Button (0.8.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_preheat | !PrintTimeGenius Plugin (2.2.8) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_PrintTimeGenius | !Simple Emergency Stop (1.0.5) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_simpleemergencystop | !Slicer Thumbnails (1.0.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_prusaslicerthumbnails | Software Update (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/softwareupdate | !SpoolManager Plugin (1.7.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_SpoolManager | !Terminal Messaging (0.1.0) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_terminalmessaging | !Themeify (1.2.2) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_themeify | !TouchUI (0.3.18) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_touchui | !UI Customizer (0.1.8.9) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_uicustomizer | Virtual Printer (bundled) = /home/pi/oprint/lib/python3.7/site-packages/octoprint/plugins/virtual_printer | !WS281x LED Status (0.8.1) = /home/pi/oprint/lib/python3.7/site-packages/octoprint_ws281x_led_status Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2022-05-08 18:58:10,196 - octoprint.environment - INFO - Detected environment is Python 3.7.3 under Linux (linux). Details: | hardware: | cores: 4 | freq: 1400.0 | ram: 914010112 | os: | bits: 32 | id: linux | platform: linux | plugins: | pi_support: | model: Raspberry Pi 3 Model B Plus Rev 1.3 | octopi_version: 0.18.0 | throttle_state: '0x0' | python: | pip: 20.3.3 | version: 3.7.3 | virtualenv: /home/pi/oprint 2022-05-08 18:58:10,212 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/webassets... 2022-05-08 18:58:10,244 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-cache... 2022-05-08 18:58:11,061 - octoprint.server - INFO - Shutting down intermediary server... 2022-05-08 18:58:11,311 - octoprint.server - INFO - Intermediary server shut down 2022-05-08 18:58:11,314 - octoprint.events - INFO - Processing startup event, this is our first event 2022-05-08 18:58:11,315 - octoprint.events - INFO - Adding 2 events to queue that were held back before startup event 2022-05-08 18:58:11,316 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue... 2022-05-08 18:58:11,317 - octoprint.server - INFO - Autoconnect on startup is configured, trying to connect to the printer... 2022-05-08 18:58:11,374 - octoprint.plugins.softwareupdate - INFO - Fetching check overlays from https://plugins.octoprint.org/update_check_overlay.json 2022-05-08 18:58:11,423 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2022-05-08 18:58:12,114 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue 2022-05-08 18:58:12,277 - octoprint.plugins.tracking - INFO - Sent tracking event system_unthrottled, payload: {'throttled_now': False, 'throttled_past': False, 'throttled_mask': 0, 'throttled_voltage_now': False, 'throttled_voltage_past': False, 'throttled_overheat_now': False, 'throttled_overheat_past': False} 2022-05-08 18:58:12,799 - octoprint.server - INFO - Trying to connect to configured serial port None 2022-05-08 18:58:13,056 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial connection" 2022-05-08 18:58:13,103 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder... 2022-05-08 18:58:13,151 - octoprint.server.util.watchdog - INFO - ... initial scan done. 2022-05-08 18:58:13,767 - octoprint.util.comm - INFO - Serial detection: Performing autodetection with 7 port/baudrate candidates: /dev/ttyACM1@115200, /dev/ttyACM1@250000, /dev/ttyACM1@230400, /dev/ttyACM1@57600, /dev/ttyACM1@38400, /dev/ttyACM1@19200, /dev/ttyACM1@9600 2022-05-08 18:58:13,767 - octoprint.util.comm - INFO - Serial detection: Trying port /dev/ttyACM1, baudrate 115200 2022-05-08 18:58:13,768 - octoprint.util.comm - INFO - Connecting to port /dev/ttyACM1, baudrate 115200 2022-05-08 18:58:13,839 - octoprint.util.comm - INFO - Serial detection: Handshake attempt #1 with timeout 2.0s 2022-05-08 18:58:13,857 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-05-08 18:58:14,137 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on octopi._http._tcp.local.' for _http._tcp.local. 2022-05-08 18:58:14,328 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2022-05-08 18:58:14,869 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial connection" to "Operational" 2022-05-08 18:58:14,895 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2022-05-08 18:58:14,987 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on octopi._octoprint._tcp.local.' for _octoprint._tcp.local. 2022-05-08 18:58:14,993 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance on octopi for SSDP 2022-05-08 18:58:15,040 - octoprint.server - INFO - Listening on http://127.0.0.1:5000 2022-05-08 18:58:15,148 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.0.125 2022-05-08 18:58:15,247 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2022-05-08 18:58:15,567 - octoprint.server.util.flask - INFO - Passively logging in user ssenrah from ::ffff:192.168.0.158 2022-05-08 18:58:15,573 - octoprint.access.users - INFO - Logged in user: ssenrah 2022-05-08 18:58:15,875 - octoprint.server.util.flask - INFO - Passively logging in user ssenrah from ::ffff:192.168.0.125 2022-05-08 18:58:15,876 - octoprint.access.users - INFO - Logged in user: ssenrah 2022-05-08 18:58:16,313 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python3 -m pip" as command to invoke pip 2022-05-08 18:58:16,319 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python3.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2022-05-08 18:58:16,320 - octoprint.util.pip - INFO - ==> pip ok -> yes 2022-05-08 18:58:16,391 - octoprint.plugins.softwareupdate - INFO - Minimum free storage across all update relevant locations is 53.0GB. That is considered sufficient for updating. 2022-05-08 18:58:16,650 - octoprint.server.util.sockjs - INFO - User ssenrah logged in on the socket from client ::ffff:192.168.0.125 2022-05-08 18:58:17,377 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 10, 'printer_state': 'OPERATIONAL'} 2022-05-08 18:58:17,933 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'base_url': 'http://192.168.0.158/', 'path': '/', 'query_string': 'l10n=en'} 2022-05-08 18:58:17,987 - octoprint.plugins.tracking - INFO - Sent tracking event pong, payload: {'version': '1.7.3', 'os': 'linux', 'bits': 32, 'python': '3.7.3', 'pip': '20.3.3', 'cores': 4, 'freq': 1400.0, 'ram': 914010112, 'pi_model': 'Raspberry Pi 3 Model B Plus Rev 1.3', 'octopi_version': '0.18.0', 'plugins': ''} 2022-05-08 18:58:18,654 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2022-05-08 18:58:18,705 - octoprint.plugins.tracking - INFO - Sent tracking event startup, payload: {'version': '1.7.3', 'os': 'linux', 'bits': 32, 'python': '3.7.3', 'pip': '20.3.3', 'cores': 4, 'freq': 1400.0, 'ram': 914010112, 'pi_model': 'Raspberry Pi 3 Model B Plus Rev 1.3', 'octopi_version': '0.18.0'} 2022-05-08 18:58:19,612 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.0.158 2022-05-08 18:58:19,738 - octoprint.server.util.sockjs - INFO - User ssenrah logged in on the socket from client ::ffff:192.168.0.158 2022-05-08 18:58:20,140 - octoprint.server.util.flask - INFO - Passively logging in user ssenrah from ::ffff:192.168.0.125 2022-05-08 18:58:20,141 - octoprint.access.users - INFO - Logged in user: ssenrah 2022-05-08 18:58:21,924 - octoprint.util.comm - INFO - Printer reports firmware name "Prusa-Firmware 3.10.0 based on Marlin" 2022-05-08 18:58:21,925 - octoprint.util.comm - INFO - Detected Prusa firmware, enabling relevant features for issue free communication 2022-05-08 18:58:21,926 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting 2022-05-08 18:58:22,584 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {'firmware_name': 'Prusa-Firmware 3.10.0 based on Marlin', 'printer_port': None, 'printer_baudrate': 0} 2022-05-08 18:58:37,448 - octoprint.server.preemptive_cache - INFO - ... done in 19.52s 2022-05-08 18:58:37,603 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.0.125 2022-05-08 18:58:38,509 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.0.125 2022-05-08 18:58:38,550 - octoprint.server.util.flask - INFO - Passively logging in user ssenrah from ::ffff:192.168.0.125 2022-05-08 18:58:38,551 - octoprint.access.users - INFO - Logged in user: ssenrah 2022-05-08 18:58:39,092 - octoprint.server.util.sockjs - INFO - User ssenrah logged in on the socket from client ::ffff:192.168.0.125 2022-05-08 18:58:40,885 - octoprint.plugins.tracking - INFO - Sent tracking event webui_load, payload: {'browser_name': 'Chrome', 'browser_version': '101.0.4951.54', 'os_name': 'Windows', 'os_version': '10'}